Contacts, Copyright
Sales: Tel.: +49 (0)6151 32 - 10 28Email: [email protected]
Service: 24h Emergency hotline: +49 (0) 172 - 650 17 00 Discontinuous Weighing Technology+49 (0) 171 - 255 11 95 Continuous Weighing Technology
Email: [email protected]
Business Segments:
Heavy Duty Weighing & Feeding
Service Tel.: +49 (0) 61 51 32 - 26 23Service Fax: +49 (0) 61 51 32 - 32 70
E-Mail: [email protected]
Light Duty Weighing & Feeding
Service Tel.: +49 (0) 61 51 32 - 25 72Service Fax: +49 (0) 61 51 32 - 20 72
E-Mail: [email protected]
Vibrating Machines
Service Tel.: +49 (0) 61 51 32 - 10 75Service Fax: +49 (0) 61 51 32 - 30 96
E-Mail: [email protected]
Transport & Logistics
Service Tel.: +49 (0) 61 51 32 - 24 48Service Fax: +49 (0) 61 51 32 - 13 69
E-Mail: [email protected]
Components & Spare Parts
Service Tel.: +49 (0) 61 51 32 - 17 58Service Fax: +49 (0) 61 51 32 - 36 32E-Mail: [email protected]
©Copyright 2004SCHENCK PROCESS GmbHMeasuring and Process SystemsLandwehrstrasse 55, D-64293 Darmstadthttp://www.schenck-process.com
All rights reserved. Any reproduction of manual, regardless of method, without prior permission bySCHENCK PROCESS GmbH in writing, even by excerpt, is prohibited.
Subject to change without prior notice.
Contents
1. Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2. Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Power ON · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 4
LEDs · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 4
Normal Displays · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 5
Operation in Normal Mode · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 5
Event Messages · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 6
Function Distributor · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 8
Display Check and Version Number · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 8
Keyboard Mode · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 9
START/STOP Feeder · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 9
EasyServe Active/Deactive · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 9
Batching Mode · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 10
Loading By Sight · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 13
Print Batch Report · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 13
Zero Setting· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 15
Read Parameters · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 17
3. Control Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
4. Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
5. Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
6. Setting Programs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Function Distributor · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 27
Calibrating Functions· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 28
TW Tare· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 28
CW Weight Check · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 29
Simulation Mode · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 310405
INTECONT PLUS VDM
ContentsBV-H2219 GB I - 1
Transmission to third parties and reproductionof this documentation are not permitted.SCHENCK PROCESS GmbH reserves allrights of ownership and copyrights.
TechnischeRedaktion BVED
Set Time · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 31
7. Service Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
8. Parameterization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Select Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Enter Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Hardware Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Load Default Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Parameter Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
9. Event Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
System Message S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Electrical System E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Calibration C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Maximum H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Minimum L. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Material Flow (Batch) B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Signal Lamps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
10. Commissioning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Test Plug · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 65
11. Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Start Sources. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Batching. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Data Flow Charts: Signal Flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Base Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Option Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Printer Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
12. Replacement Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Replacing INTECONT PLUS FIP —> INTECONT PLUS VEG . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 0405
VDM INTECONT PLUS
ContentsBV-H2219 GB I - 2
Transmission to third parties and reproductionof this documentation are not permitted.SCHENCK PROCESS GmbH reserves allrights of ownership and copyrights.
TechnischeRedaktion BVED
0405
INTECONT PLUS VDM
ContentsBV-H2219 GB I - 3
Transmission to third parties and reproductionof this documentation are not permitted.SCHENCK PROCESS GmbH reserves allrights of ownership and copyrights.
TechnischeRedaktion BVED
This manual applies to software version VDM 20600-00.
Edition : 0405
0405
VDM INTECONT PLUS
ContentsBV-H2219 GB I - 4
Transmission to third parties and reproductionof this documentation are not permitted.SCHENCK PROCESS GmbH reserves allrights of ownership and copyrights.
TechnischeRedaktion BVED
This page left intentionally blank
1. Overview
On INTECONT:
INTECONT PLUS is designed as measuring and
evaluation system for
Belt WeighersSolids Flow MetersMass Flow MetersMass Flow FeedersWeighfeedersLoss-in-weight Feeders
The system is supplied in 3 variants:
1. Without option card (standard)
2. With option card VFE 610Vfor additional input/outputs and printer
3. With option card for fieldbusVSS021V : Modbus/S5VPB 020V: ProfibusVCB020V: DeviceNet
The present manual applies to solids flow meters with
controlled material prefeeder.
Task:
A Solids Flow Meter is designed for continuous
weighing of materials with free flowing or fluidizable
properties. Combined with a controlled material
prefeeder, preset material amounts can be batched.
For Further Reading:
Fieldbus manual BVH2220
S5-RK512 (3964R) FH 458
Modbus (Comp) FH 525
Display:
5 x 7 - dot matrix with 6 mm character height
Upper display left : running messageright : totalized amount in kg/h or
t/h
Lower display left : event messagesright : selectable
flow rate, measured load,etc.
Display can be changed over to American units.
LEDs:
2 green and 3 red LEDs
Green LEDs : Ready
Red LEDs : Error or limit value messages
0405
INTECONT PLUS VDM
OverviewBV-H2219 GB 1
Transmission to third parties and reproductionof this documentation are not permitted.SCHENCK PROCESS GmbH reserves allrights of ownership and copyrights.
TechnischeRedaktion BVED
O Z1 = 362.5 kgE1 I = 1 0 0 0 kg/h
Keyboard:
Flexible membranes with tactile touch
gB Start/stop measurement
TU Preselect lower displaySelect functions
i Reset counter
G FUNC Call function distributor andevent texts
O DEL Acknowledge event message,delete input
N ESC Abort function
f ENT Start function,acknowledge input
P DAT Prepare input, e.g. of setpoint
B9 Enter parameters
KL Enter sign and decimal point
Some Definitions:
I = Feed rate in kg/h or t/hMaterial amount per unit time
Z = Totalized amount in kg or t
Q = Measured loadLoad on load cells in kg
Measuring Principle:
Material is guided to measuring chute S free from
whirls.
Deflection force acts on load cell L/C whose output
voltage is proportional to flow rate.
INTECONT evaluates signal and computes flow rate
and totalized amount.
Measuring Technique:
� Precision AC voltage amplifier with continuouscorrection of zero point and range.
� Highly resolving analog-to-digital converter.The integrated method is designed to efficientlysuppress mains voltage interferences.
� 16-bit microcontroller
� Unlimited storage of counter readings,configuration and calibration data.
0405
VDM INTECONT PLUS
OverviewBV-H2219 GB 2
TechnischeRedaktion BVED
Transmission to third parties and reproductionof this documentation are not permitted.SCHENCK PROCESS GmbH reserves allrights of ownership and copyrights.
The schematic below shows all inputs and outputs.
The sample mechanical equipment presents a system
equipped with crossed flexure strip.
S = Measuring chute
L/C = Load cell
M = Relay output for material prefeeder
F, G = Relay output for full feed/dribble
feed changeover
Z = External totalizing counter
A = Analog display for feed rate or
measured load
SERIAL = Serial interface for printer and host
computer
24 V = Power supply
ALARM = Relay output for ALARM
MIN = Relay output for MIN limit value
MAX = Relay output for MAX limit value
ACK = Acknowledge event messages
EXT INPUT = External interrupt input
ON = Relay output, scale started
START/STOP = Start and stop scale
Release = Release input
0405
INTECONT PLUS VDM
OverviewBV-H2219 GB 3
Transmission to third parties and reproductionof this documentation are not permitted.SCHENCK PROCESS GmbH reserves allrights of ownership and copyrights.
TechnischeRedaktion BVED
O Z1 = 362.5 kgI = 1498 kg/h
2. Control
Power ON
During power failure
all counter readings
counter pulses still to be output
preselected normal displays,
Service values, e.g. ON-time
are stored for an unlimited time.
The internal clock continues running for approx. 5
days.
After power-up, an automatic display and lamp test is
performed, followed by the display version number,
then by normal displays.
Message E1
reports power failure .
Message can be configured as ALARM or WARNING.
ALARM: Red LED X and symbol E1 flash.
Acknowledge message before startingscale.
WARNING: LED X remains dark, symbol E1 doesnot flash.No acknowledgement required.Start scale manually or automatically.
O Acknowledge event message.
LEDs
a (green) POWER OKlit if all power supplies are OK.
b (green) CPU OKlit if microprocessor is ready tooperate.
X (red) ALARMflashes if an Alarm is available.In addition, the event code isshown in lower display line.
MIN (red) MIN LIMIT VALUElit if feed rate limit value isexceeded down.
MAX (red) MAX LIMIT VALUElit if feed rate limit value isexceeded up.
READY: The two green signal lamps light;no Alarm is available.
0405
VDM INTECONT PLUS
ControlBV-H2219 GB 4
TechnischeRedaktion BVED
Transmission to third parties and reproductionof this documentation are not permitted.SCHENCK PROCESS GmbH reserves allrights of ownership and copyrights.
Z1 = 2 5 0 0 kgE1 I = 0 kg/h
Z1 = 2 5 0 0 kgE1 I = 0 kg/h