WÜrth products Magazine - Wuerth(Cambodia) Ltd.
-
Upload
khangminh22 -
Category
Documents
-
view
0 -
download
0
Transcript of WÜrth products Magazine - Wuerth(Cambodia) Ltd.
WÜrth productsMagazine
Version 2Construction Division / Auto Division / Metal Division
មហន េវធស មាន 85 សពភពាក85 countries - Worldwide
Art. No. 0510 955 606
Vehicle battery charger12V-70A
Charging voltage 12 V/DC, Charging current 70 AMin./max. rechargeable battery/battery capacity 10-250 AhMin./max. nominal voltage 195,5 / 264,5 V/DCMin. rechargeable battery/battery capacity 10 AhMax. rechargeable battery/battery capacity 250 AhCharging characteristics IUoU, IP protection class IP 21Length x width x height 315 x 110 x 200 mm, Length(battery charging cable with clamps) 5 mLength 315 mm, Width 110 mm, Weight of machine 6.5 kg, Height 200 mm
For motor vehicle battery charger, 12 V–70 A
Round bladeBlade: Matt chrome-plated. Tip:DIN 5264-A, ISO 2380, Black PointStandard: SMS SS 2830, DIN 5265
Round bladeBlade: Matt chrome-plated. Tip:DIN 5260-PH, ISO 8764-PH, Black PointStandard: DIN 5262, SMS SS 2831
Short model with round bladeBlade: Matt chrome-plated. Tip: DIN 5264-A, ISO 2380, Black PointStandard: DIN 5265
Round bladeBlade: Matt chrome-plated, long modelTip: DIN 5264-A, ISO 2380, Black Point. Standard: DIN 5265
One-piece hexagon blade/wrenchadapter made from tempered,impact-resistant materialLarge impact cap. Tip: DIN 5264-AISO 2380, Black Point
Screwdriver with one-piece hexagonblade/wrench adapter made fromtempered, impact-resistant material.Large impact cap. Tip: DIN 5260-PH,ISO 8764-PH, Black Point
With hexagon blade and wrench adapterBlade: Matt chrome-platedTip: DIN 5260-PZ, ISO 8764-PZ,laser tip, Black Point
Number of pieces inassortment/set: 7 PCS
6-piece setContents: 0.6 x 3.5 x 100 mm, 1.0 x 5.5 x 125 mm,1.2 x 6.5 x 150 mm, 1.2 x 8.0 x 175, PH1, PH2
Contents: 6 pieces0.6 x 3.5 x 75; 1.0 x 5.5 x 100; 1.2 x 6.5 x 125; 1.6 x 8.0 x 1501 each of PH screwdriver with hexagon blade andtorque adjustment PH 1; PH 2
Blade diameter: 3.5 mm, Blade length: 50 mmHandle length: 100 mm, Head diameter: 20 mm
For hexagon head screwsBlade: round, flexible. Tip: Hex headHead: bright nickel-plated,inner bore for projecting threaded shaftsHard-to-reach places, hose clamps
Material Plastic, Min./max. voltage measuring range 150-250 V/ACMin. voltage measuring range150 V/AC, Max. voltage measuring range 250 V/AC, Thickness of cutting edge x width of cutting edge 0,5 x 3 mm, Blade length 60 mm
ឧបករណកគយ
ទរសបឧបករណកគយ
បចសង
ទណវស ឡចនច
Art. No. 0510 955 624
Wall Mount for battery charger
Art. No. 0613 231 725(0.4x2.5x75)
Art. No. 0613 231 755 (1.0x5.5x150)
Screwdriver Slottedទណវសសត
Screwdriver Slotted 1.2x8.0x25ទណវសសត
ទណវសសត
Art. No. 0613 232 03(PH 3 x 150)Art. No. 0613 232 04(PH 4 x 200)
Screwdriver Phillips (PH)ទណវសយ (PH)
Art. No. 0613 322 2(PH 2 x 100)Art. No. 0613 322 4(PH 4 x 200)
Screwdriver Phillips (PH)
Screwdriver Phillips (PZ), Laser Tip PZ1 x 80
Lifter Screwdriver 1.3x3, 5x50
ទណវស មខបន (PH)
ឈតទណវស
ឈតទណវស ឡចនច
ឈតទណវស
ទណវសមខបន (PZ) កល
Art. No. 0613 321 045(0.8x4.5x90)Art. No. 0613 321 055(1x5.5x100)
Screwdriver, slotted
Art. No. 0613 247 360
Voltage Tester
Art. No. 0613 251 08
Screwdriver Slotted 0.8x4.0x300ទណវសសត
Art. No. 0613 261 04
Hose-Clamp Screwdriverទណវសដងទន
Art. No. 0613 286 06(6 x 150)Art. No. 0613 286 07(7 x 150)
Art. No. 0613 426 1
Art. No. 0613 426 3
Art. No. 0613 485 035
Electrical ScrewdriverPrecision Set TX 7pcs
Art. No. 0613 489 1
Screwdriver set 6-pcs Round blade
Art. No. 0613 923 26
Screwdriver set 6-pcs Hexagonblade with spanner nut
Art. No. 0613 942 26
Art. No. 0613 489 2
Art. No. 0613 489 3
ឧបករណជាងTOOLS
Tools 03Wuerth Cambodiahttps://eshop.wuerth.de
Art. No. 0613 963 25
Screwdriver, VDE Assortment 5pcs
5 piecesBlade: burnished, insulatedStandard: Individually tested in line with IEC 60900:2004Scope of delivery: One screwdriver each of slotted 0.4 x 2.5;slotted 0.8 x 4.0; slotted 1.2 x 6.5, PH1, PH2
Number of pieces inassortment/set: 36 PCS
Drive: C 6.3 (1/4 inch)Tip type: PZNumber of pieces in assortment/set: 36 PCS
Drive 1/4 inchNumber of pieces in assortment/set: 36 PCS
Min. height : 425 mmMax. height: 680 mmLoad capacity: 1500 kg
Min./max. voltage measuring range: 6-24 V/DCMin. voltage measuring range: 6 V/DCMax. voltage measuring range: 24 V/DCCable length: 75 m
With plastic-coated handlesWith cutting device and hub cap lifterLength 240 mm
ឈតទណវស VDE
បចសេភងរថយន
1 x cordless sabre saw SBS 10 A3 x batteries 10.8 V Li-ion 2.0 Ah1 x charger AL 30-LI
1 x cordless drill screwdriver BS 10 A1 x cordless multi-cutter EMS 10 A1 x battery-powered hand-held lamp HL 10 A
Length: 28 cmAngled shape
កលទណវសមខបន (PH)
កលទណវសមខបន (PZ)
កលទណវសមខបន (PH,PZ)
កលទណវសមខបននងមខសត
ងទររថយន
ជកសបបបលកងរថយន
Art. No. 0614 250 1
Art. No. 0614 250 10Bit-Box 36 PLS (PH)
Bit-Box 36 PLS (PH, PZ)
Art. No. 0691 800 051
Art. No. 0693 080 0
Support Stand
Brush for Tyre Fitting Paste
Art. No. 0614 250 6
Art. No. 0614 250 2
Bit-Box 36 PLS (PZ)
Art. No. 0614 250 5
Drive 1/4 inchNumber of pieces in assortment/set: 36 PCSBit-Box 36 PLS (PH, Blades)
Car Test Lamp 6-24V
Art. No. 0695 002 24
ដបសសណកងរថយនWheel Weight Plier
Art. No. 0695 391 885
Cordless tools,assortment/set 7pcs
Art. No. 0700 108 007
Cordless tools,assortment/set 8pcs
Art. No. 0700 108 070
ឧបករណជាងTOOLS
Tools 04Wuerth Cambodiahttps://eshop.wuerth.de
Length: 1100 mmWidth: 700 mmMaterial: Faux leather
Version:Fastening with sewn-in magnetsColour: BlackArt. No. 0899 600 5
Fender Coverគរបររលន
For the professional processing of paint mist, pain transitions, and defectivepoints in freshly painted or hardened topcoats. Vehicle preparation.Surface refinement.Art. No. 0964 893 8
Polish set/kitឈតបពស
Max power: 1380 WMin./max. nominal voltage: 220 / 240 V/ACMin./max. frequency: 50 / 60 HzCable length: 7.5 mContainer capacity: 34 lUnderpressure: 230 mbarSound-pressure level: 67 dBNominal width: 35 mm
IP protection class: IP X4Air current: 61 l/sMax. frequency: 60 HzMaterial of the bins: PolypropyleneLength: 517 mmLiquid volume: 19.2 lWidth: 375 mmHeight: 572 mm
Art. No. 0701 160 0
High-Pressure Cleaner HDR 160 Premium
Min. feed quantity: 250 l/hMin. working pressure: 30 barLength: 360 mmWidth: 375 mmHeight: 925 mm
Nominal voltage: 230 V/ACFrequency: 50 HzWeight of machine: 0.87 kg
Cable length: 4 mPower input: 2000 WProtection class:Protection class II/protective insulationMin./max. blower temperature:50 to 600 °CMin./max. air current: 150-500 l/min
Min./max. feed quantity: 250-480 l/hMin./max. working pressure: 30-130 barMax. pressure: 160 barMax. inlet temperature: 60 °CWeight of machine: 22 kg
Motor output: 2.2 kWMax. pressure: 10 barTank capacity: 20 lIntake air capacity: 284 l/minWeight of machine: 35 kgNominal voltage: 230 V/ACFrequency: 50 HzMin./max. temperature conditions :5 to 40 °CRotation speed: 2850 U/min(rpm)
Oil type ISO 100Oil capacity 0.35 lNumber of quick-action couplings: 2 PCSCable length 1.85 mLength x width x height:480 x 410 x 800 mmProtection class: Protection class II/protective insulationSupply air quantity at 7 bar:152 l/min
For HWS 15-L
សនងសតសធទក
សនបរថយន
ធងខល
Art. No. 0701 229
Air Compressor, Electric K290
ឧបករណផខល
សនបមធល េសមសត
Art. No. 0702 202 0
Art. No. 0702 203 0
Hot air blower,electric
Wet and dry vacuum cleaner,electric
ថងសនបមធល
ដងតសនបមធល
តរងសនបមធល
Art. No. 0702 400 071
Art. No. 0701 137 1
Wet/dry fleece filter bag
For ISS 55-S Automatic and ISS 55-S Automatic 2013 industrial wet/dry vacuum cleanerAlso for predecessor models ISS 32, 54, 54 H, 54 HO, 54 AS, 60.Art. No. 0702 400 276
Metal tube,plug-in
For HWS 15-Lកលបតសបសនបមធល
កលបតសនបមធល
ទាបតសបសនបមធល
Art. No. 0702 400 284
Wet/dry floor attachment,plug-in
Material: PlasticLength: 3 m
Art. No. 0702 400 320
Suction hose,Clip-on
For ISS 35, ISS 35-S, ISS 45-M industrial wet & dry vacuum cleaner (automatic)If moisture is extracted, leave the filter to air dry.
Nominal width 35
Art. No. 0702 400 367
Flat fold filter
ឧបករណជាងTOOLS
Tools 05Wuerth Cambodiahttps://eshop.wuerth.de
Art. No. 0702 400 718
Wet/dry floor attachment,plus-in
Nominal voltage: 230 V/ACFrequency: 50 HzProtection class: Protection class II/protective insulationWeight of machine: 2.3 kgMin./max. idle speed:900-2700 U/min(rpm)
Max. polishing element diameter: 200 mmThread type x spindle-thread diameterM 14 mmLength x width x height: 370 x 85 x150 mmPower input: 1200 WPower output: 750 WCable length: 4 mrt plate and polishing pad.
Art. No. 0702 453 0
Polishing Machine, PM 200-E
Art. No. 0702 563 1
Chipping Hammer, MH 5-XES
Nominal voltage: 230 V/ACFrequency: 50 HzProtection class: Protection class II/protective insulationPower input: 1300 WPower output: 615 W
Nominal voltage: 230 V/ACFrequency: 50 HzProtection classProtection class II/protective insulationPower input:1750 W, output:1050 WImpact rate:1300 U/min(rpm)
Min./max. nominal voltage220 / 230 V/ACMin./max. frequency: 50 / 60 HzProtection classProtection class II/protective insulationPower input: 400 W, output 220 WVersion: StraightMax. idle speed:25000 U/min(rpm)Power output: 224 WMax. drill chuck span width:6 mm
Min. hose inner diameter: 8 mmWeight of machine: 0.5 kgAir consumption: 113 l/minConnection thread: 1/4 inch
Version: AngledMax. idle speed:22000 U/min(rpm)Power output: 224 WMax. drill chuck span width:6 mm
Min. hose inner diameter: 8 mmWeight of machine: 0.4 kgAir consumption: 113 l/minConnection thread: 1/4 inch
Min./max. idle orbital rate:11000-18500 1/minOscillation stroke: 3.2 DegreeTool holding device: Double hexagonWeight of machine: 1.25 kgCable length: 5 m
Min./max. impact rate: 0-1300 U/min(rpm)Tool holding device: Hexagon socket, 28 mmMax. impact energy: 41 JImpact energy: 41 J. Tip size: 30 mmLength x height: 760 x 165 mmWeight of machine: 16.5 kg. Cable length: 4 m
Min./max. impact rate: 1430-2840 U/min(rpm)Tool holding device: SDS-maxImpact energy: 8 JAdjustable chisel position: 18-foldWeight of machine: 6.2 kgCable length: 4 m
Tool holding device: 10,2mm hexagon squareWorking pressure: 6.3 barAir consumption: 76.4 l/min
Type description: DSS 1/2 Zoll HTool holding device:1/2-inch external squareMin. working torque: 70 NmMax. working torque: 470 NmMax. releasing torque: 569 NmSound-pressure level: 92 dB
Sqiare Drive: 1/2”Max. oper torque*/Nm.:785Max. torque/Nm: 860No-load speed/min: 7,800Operating pressure/bar:6,3
Type description: DSS 3/4" HTool holding device: 3/4-inch external squareMin. working torque: 350 NmMax. working torque: 1440 NmMax. releasing torque: 1500 NmSound-pressure level: 96 dBWorking pressure: 6.3 bar
Weight of machine: 4.73 kgMin. hose inner diameter: 11 mmAir consumption: 215 l/minConnection thread: 3/8 inchLength x width x height:261 x 87 x 227 mm
Weight/kg: 2,5Length/mm: 174Air consumption I/min.: 140Air connection: R 1/4”Hose diameter(min.)/mm: 9
Vibration: 3.78 m/s²Working pressure: 6.3 barWeight of machine: 2.3 kgMin. hose inner diameter: 8 mmAir consumption: 102 l/minConnection thread: 1/4 inchLength x width x height: 195 x 64 x 202 mm
ឧបករណបខល(មខង)
ឧបករណបខល(មខង)
េរខល
េរខល
េរខល
េរខល
េរខល
េរខល
េរខល
Max. impact rate: 2900 U/min(rpm)Piston diameter: 19 mmLength: 218 mmWeight of machine: 1.73 kg
Type description: DSS 3/4" HTool holding device: 3/4-inch external squareMin. working torque: 350 NmMax. working torque: 1440 NmMax. releasing torque:1500 NmLength x width x height: 261 x 87 x 227 mm
Working pressure: 6.3 barWeight of machine: 4.73 kgMin. hose inner diameter: 11 mmAir consumption: 215 l/minConnection thread: 3/8 inchSound-pressure level: 96 dB
Type description: DSS 1"LTool holding device: 1-inch external squareMin. working torque: 996 NmMax. working torque: 1870 NmMax. releasing torque: 2440 NmSound-pressure level: 95 dBVibration: 9.26 m/s²
Working pressure: 6.3 barWeight of machine: 10.93 kgMin. hose inner diameter: 11 mmAir consumption: 370 l/minConnection thread:1/2 inchLength x width x height512 x 109 x 188 mm
Tool holding device: 1/4-inch hexagon squareMax. torque: 40.7 NmLength: 155 mmMin./max. idle speed: 0-850 U/min(rpm)
Sound-pressure level: 90 dBWorking pressure: 6.3 barAir consumption: 113 l/minMin. hose inner diameter: 8 mm
Tool holding device:3/8-inch external squareMax. torque: 40 NmLength: 170 mm
Sound-pressure level: 88 dBWorking pressure: 6.3 barAir consumption: 90 l/minMin. hose inner diameter: 6 mm
សនបង
សនបង
ឧបករណបខល
Art. No. 0702 575 1
Chisel Hammer MH 16-XE
Art. No. 0702 697 1
Electric Multi-Cutter EMS 1.6ឧបករណ ង
Art. No. 0703 230 0
Die Grinder Penumatic
Art. No. 0703 231 0
Pneumatic Tool DSW 22
Art. No. 0703 712 1
Pneumatic Hammer Chisel
Art. No. 0703 736 0
1/2" Impact Screwdriver DSS 1/2"
Art. No. 0703 756 0
Pneumatic Drive Impact Wrench DSS 1/2" H
Art. No. 0703 773 0
3/4'' Impact Wrench
Art. No. 0703 775 0
1'' Pneumatic Impact Wrench
ឧបករណជាងTOOLS
Tools 06Wuerth Cambodiahttps://eshop.wuerth.de
Art. No. 0703 780 0
Pneumatic Ratchet Screwdriver 1/4', 3/8' DRS Multi
Art. No. 0703 780 0
Pneumatic Ratchet Screwdriver1/4', 3/8' DRS Multi
Art. No. 0703 838 0
Pneumatic Ratchet Driver 3/8" DRS
Delivery scope:Optical testing deviceSampling pipette
Delivery scope:Optical test device2 x removal pipetteCalibrating screwdriver
Connection: 1/4”Tank content: 4mlWeight: 55g
High-quality caseOperating manualCleaning cloth
CaseOperating InstructionsCleaning cloth
Length: 235 mmMin./max. clamping width: 0-60 mm
Bi-hexagon, multi-profileSurface: chrome-plated, polishedDrive: 3/8" square socketTip: bi-hexagon, multi-profile
Metric DIN 3113A/ISO 3318/7738Drive: Ring side POWERDRIV® bi-hexagonMaterial: Chromium-vanadium steelSurface: Chrome-plated, polished heads and ringGeometry: Ring end angled 15°, jaw angle 15°
Width across flats 8 mm, 9 mm,10 mm, 11 mm, 12 mm, 13 mm14 mm, 15 mm, 17 mm, 19 mm22 mm
Drive: Ring side POWERDRIV, bi-hexStandard:DIN 3113A/ISO 3318/773Geometry: Ring side angled 15°, jaw offset 15°Material: Chromium-vanadium steelSurface: Chrome-plated, polished heads and ring
Contents: 8 pcs1 combination wrench in eachsize (inch) 3/8; 7/16; 1/2; 9/16;5/8; 11/16; 3/4; 7/8Short design, 8 pcs
Metric DIN 3113A/ISO 3318/7738Ring side drive: POWERDRIV bi-hexMaterial: Chrome-vanadium steel
Surface: Chrome-plated, polished heads and ringGeometry: Ring side angled 15°,head offset 15°
Conical gauge plateletsLength: 100 mmStored in plastic sheath
For mobile universal flanging device
For cutting piano wire, hard and soft wires
For gripping, holding and cutting hard and soft wires and cables
Length: 210 mm, Length in inches: 8 1/4 inJaws length: 72 mm, Jaws width:17.5 mmJaws thickness: 9.5 mm, Angle of jaws: 40 Degree2-component plastic
Jaw-tips width: 4 mm,Jaw-tips thickness: 3 mmMaterial: Steel, Surface:Chrome-platedMaterial of the grip handle
For work on live parts up to 1000 volts (AC) and up to 1500 volts (DC),observing all prescribed safety precautions
Number of pieces in assortment/set: 8 PCS
Set comprising combination pliers, stripping pliers and snipe nose pliersand power side cutters
Pliers Assortment: 180, 160, 210, 160mmNumber of pieces in assortment/set: 4 PCS
Art. No. 0704 510
ឧបករណសសប
ដបត
ដបត
ឈតដប
ដបតច VDE
ឈតដប
ឈតដប VDE
Optical Antifreeze, Battery,and AdBlue Tester
ឧបករណសសត នងCoolant
ឧបករណស សត, Coolantនង Adblue
Mist oiler 1/4"កលតញចយង
Art. No. 0704 506
OPTICAL ANTIFREEZE AND BATTERY ACID TESTER
Art. No. 0709 861 055
Art. No. 0713 09 26
Locking Pliers, Half-Round Jaws L 235 MM
ដបអតទច
Art. No. 0713 123 0
Global Sockets onារបបង
Art. No. 0713 301 40
Combination Spanner Set 11pcs ឈតារតចាន
ឈតារតចាន
ារតចាន
Art. No. 0713 303 40
Art. No. 0713 309 017
Art. No. 0713 51 40(8 Pcs 0.05-0.50)Art. No. 0713 51 42(20 Pcs 0.05-1.00)
Combination socket wrench set
Offset combination wrench 17mm
Valve Adjuster Gauge
Art. No. 0714 01 071
Pliers Assortment, 2pieces
Art. No. 0714 01 52
Art. No. 0714 01 55
Art. No. 0714 01 578
Side Cutter
Combination Pliers
VDE SNIPE NOSE PLIERS
Art. No. 0714 01 582
VDE-combi. Pliers/screwdriver set
ឧបករណជាងTOOLS
Tools 07Wuerth Cambodiahttps://eshop.wuerth.de
Art. No. 0714 01 60
Pliers Assortment
M W C D
Handle: 2K TPR.Cutting edge: For hard andsoft wire.
Joint: Lap joint.Head: Bright polished with chromeplated.
Handle: 2K TPR.Cutting edge: For hard andsoft wire.
Handle: 2K TPRCutting edge: For hard andsoft steel.Jaws: Snipe-nose, serrated.
Joint: Lay-on joint.Head: Bright polished with chromeplated.
Joint: Lap-joint.Head: Bright polished with chromeplated.
Number of pieces in assortment/set: 4 PCSProduct weight (per item): 739 g
Length: 235 mmMin./max. clamping width:0-48 mm
Material: SteelSurface: Nickel-platedProduct weight (per item): 512 g
Min./max. wire cross section: 0,02-10 mm²
Min./max. wire cross section: 4-16 mm²
Width across flats: 17 x 19 x 21 mmNumber of pieces in assortment/set: 3 PCS
Drive: 1 inchTip type: Twelve-sided head
ារបសបារខល
ារប 1"
ារាះទាង
ារាះទាង
ឈតារតចានអត
ារតចានអត
ដបត
ដបត
ដបតច
ឈតដប ែហរ
ដបអតទច
ដបអតទច
ដបសក នងតេភង
Number of pieces in assortment/set: 3 PCS Width across flats: 10 mm, 11 mm, 12 mmProduct weight (per item): 190 g
Standard: DIN 3118.Material: chrome vanadium steel.Surface finish: chrome-plated, rings polished.Geometry: ring ends offset by 15°, ring position 15°For union nuts and pipe bolt connections.
Art. No. 0714 01 916
Combination pliers L7IN-L180MM
Art. No. 0714 01 921
Side cutter pliers L7IN-L180MM
Art. No. 0715 01 901
Snipe-Nose Cutting Pliers
Art. No. 0714 02 30
Art. No. 0714 09 08
Art. No. 0714 09 060
Circlip Pliers Set, Form A,B,C,D, 4pcs 19-60 MM
Vice-grip Pliers with Semi-CircularJaws 160, 0-32
Wuerth Locking Plier L 250MM
Art. No. 0714 130 30
1/2" power socket wrench set
Art. No. 0714 108 116(16mm² 4-16 MM)
Art. No. 0714 108 10(0.02-10mm²)
Stripping Pliers
Art. No. 0714 151 138 (WS 38)
Art. No. 0714 151 136 (WS 36)
Art. No. 0714 151 141 (WS 41)
Art. No. 0714 151 146 (WS 46)
Art. No. 0714 151 150 (WS 50)
1" SOCKET WRENCH INSERT
Art. No. 0714 230 0
Open Doubel-Ring Wrench Set
Double-Open-Jawed Spanner
ឧបករណជាងTOOLS
Tools 08Wuerth Cambodiahttps://eshop.wuerth.de
Art. No. 0714 231 315 (13x15)
Art. No. 0714 231 417 (14x17)
Art. No. 0714 231 719 (17x19)
Number of pieces in assortment/set: 6 PCSWidth across flats: 10 mm, 12 mm, 13 mm, 17 mm, 19 mm, 8 mmNumber of teeth: 72 PCS
RTCHCOMBISPN-SET-MULTI-6PCS
Art. No. 0714 238 10 (8x10)
Art. No. 0714 25 650
Ratchet Spanner
Art. No. 0714 256 06 (6mm)
Art. No. 0714 256 07 (7mm)
Art. No. 0714 256 08 (8mm)
Art. No. 0714 256 09 (9mm)
Art. No. 0714 256 10 (10mm)
Art. No. 0714 256 11 (11mm)
Art. No. 0714 256 12 (12mm)
Art. No. 0714 256 13 (13mm)
Art. No. 0714 256 14 (14mm)
Art. No. 0714 256 15 (15mm)
Art. No. 0714 256 16 (16mm)Art. No. 0714 256 17 (17mm)
Art. No. 0714 256 18 (18mm)
Art. No. 0714 256 19 (19mm)
Art. No. 0714 256 20 (20mm)
Art. No. 0714 256 21 (21mm)
Art. No. 0714 256 22 (22mm)
Art. No. 0714 256 24 (24mm)
External clamping width: 20 mmClamping depth: 50 mmWidth: 155 mm
External clamping width: 23 mmClamping depth: 65 mmWidth: 100 mm
External clamping width: 520 mmClamping depth: 200 mmMin./max. internal clamping width250-600 mmSpindle length: 310 mmHook width: 36 mm
Hook-tip length: 28 mmHook-tip thickness: 6.5 mmMax. extraction weight: 10 tNumber of arms: 2 PCSThread dimension: G 1 inch
Spindle length: 35 mmThread dimension: M14 x 1.5Width across flats:19 mm
Spindle length: 80 mmThread dimension: M16 x 1.5Width across flats: 24 mm
For brake fluid1 litre bottle with screw cap and galvanised hanging hookFor collecting old fluidElastic silicone hose, resistant to yellowingEnsures optimum visual inspection
For collection bottle1 m total lengthInner diameter 5 mm, outer diameter 8 mm
Min./max. pressure: 6-12 barMin./max. diameter: 17-50 mmConnection thread: 1/4 inch
For brake bleederFor almost all Toyota passenger vehicles (seal diameter 42 mm)
ឧបករណាះរទល
Art. No. 0714 52 29
UNIVERSAL BALL JOINT PULLER,AUTOMOBILE, 20 MM
ឧបករណាះរទល
Art. No. 0714 52 30
UNIVERSAL BALL JOINT PULLER,AUTOMOBILE, 23 MM
ឧបករណាះងង 2
ឧបករណស នងបពាលទក Coolant
បសសតទងន
ដបសបកង ង
ទាតដបង ង
កលតបពាលង ង
ឈតកលតបពាលង ង
ឧបករណបលង ង
ឧបករណបលង ង
ារកាះតរងង
ារាះតរងង
Art. No. 0714 522 520
TWIN LEG EXTERNAL ANDINTERNAL PULLER UNIVERSAL
Length: 280 mmWidth of knife blade: 22 mm
ឧបករណជាងTOOLS
Tools 09Wuerth Cambodiahttps://eshop.wuerth.de
ADHESIVE WEIGHT REMOVERArt. No. 0714 541 222
RADIATOR BLEEDER
Art. No. 0714 55 18
O-RING ADAPTER 3 O 42
Art. No. 0714 55 306
Adapter case with four special adapters
Catch Bottle for Brake Fluid
Four special adaptersIdeal adapter addition for independent workshops and tyre servicesSpecial combination enables use on almost all vehiclesContents: U 90 K, E 20 W, B 35, G 75Art. No. 0714 55 320
Art. No. 0714 556 212
Replacement Silicone Hose for Catch Bottle
Art. No. 0714 556 213
Max. contents: 60 lMin./max. working pressure:0,4-3,5 barLength of feed hose: 350 cmABS-compliant: YesSuitable for electro-hydraulic brakes: YesLength: 64 cm, Width: 51 cm
Max. contents: 5 lLength of feed hose: 350 cmABS-compliant: YesLength: 300 mm, Width: 200 mm
Cable length: 450 cm, Height: 300 mmNominal voltage: 230 V/ACWeight: 6 kg
Cable length: 480 cmHeight: 98 cmNominal voltage: 230 V/ACWeight: 22 kgThread type: : Tapered external pipe thread,WhitworthThread type x nominal diameter in inches: R 2 in
ELECTRICAL BRAKE BLEEDER
Art. No. 0714 556 22
Brake bleeding appliance
Art. No. 0714 556 25
Art. No. 0714 57 11
Oil Filter Chain Wrench 1/2" square socket or hex head size 24Max. clamping width: 110 mm
Max. clamping width: 110 mmLength: 280 mm
Art. No. 0714 57 12
Oil Filter KeyUsed predominantly on French vehiclesAlso suitable for use on construction vehicles, e.g. tracked loaders
ឧបករណជាងTOOLS
Tools 10Wuerth Cambodiahttps://eshop.wuerth.de
ឈតសបឡរថយនNumber of pieces in 12 PCSassortment/set
Art. No. 0714 58 245
Assembly wedge kit 12pcs
ឈតឧបករណដរកក
េជងកក
ឈតកប
ឈតកប
ឈតកបន
ពងទ
កស
រន
ទក
ឈតាះប ឡង
Laser
េជង
Art. No. 0714 58 25
WINDSCREEN REMOVAL ASSORTMENT Number of pieces in 5 PCSassortment/set
Length: 1150 mmWidth: 500 mmMin./max. height: 0,8-1 m
Max. load capacity: 40 kgMaterial: Steel
Art. No. 0714 58 261
COMBINATION WORKBENCH
Length: 1150 mmWidth: 450 mmMin./max. height: 0,8-1,05 m
Max. load capacity: 55 kgMaterial: Steel
Art. No. 0714 58 262
Windscreen Stand
File blade length 100 mmFile cut 2
Art. No. 0714 61 74
Files Set 6 Pcs 100 MM
6 pcs.In plastic caseShapes: Flat blunt, Flat pointed, Semi-circular, Round, Triangular, Square
Art. No. 0714 61 87
Needle File Set L 160mm
Acc. to DIN 7250Tempered impact head
Length: 120 mmStriking-surface diameter:10 mmWidth of tip: 4 mmArt. No. 0714 63 15
Wuerth Centre Punch 120MM
8 pieces:Diameters 0.9; 1.4; 1.8; 2.4; 2.8; 3.4; 3.9; and 5.9 mm
Art. No. 0714 63 46
Pin Punch Set 8pcs 0.9-5.9
Length: 600 mmArt. No. 0714 63 47
Pinch-Bar L600MM
Length of blade: 300 mmLength: 400 mmHeight: 140 mmArt. No. 0714 64 02
Zebra Metal Hacksaw, Bow Type
Art. No. 5709 300 510
CLASER RANGE FINDER WDM 5-12
Width of band for 3m: 6 mmWidth of band for 5m: 25 mmMaterial of the housing : ABS
Transmission ratio: 1:56Max. output torque: 2200 NmDrive: 3/4“ external squareWeight: 15.5 kg
Art. No. 0714 644 210
LIGHT METAL SPIRIT LEVEL
Art. No. 0714 71 151
Torque multiplier set 3/4"
Length:100 cm, Height: 20 mmWidth: 50 mmMeasuring accuracy (per length):0.5 mm/m
Laser category: 2IP protection class: IP 65Degrees measuring accuracy:+/- 0.2 degreeLength:130 mm, Width:61 mmHeight: 31 mm
Max. temperature conditions: 50 °CMin. temperature conditions: -10 °CNumber of rechargeable batteries/batteries: 2 PCSRechargeable battery/battery life:up to 5000 measurements
Measuring accuracy for overheadmeasurements (per length): 0.75 mm/mDegrees measuring accuracy: 0.029 degree
Art. No. 0714 64 567 (5 M)
Art. No. 0714 64 566 (3 M)
Measuring Tape
ដងារគឡ
ដងារគឡ
Torque Wrenches 1/4" 1-5NM Art. No. 0714 71 19
ដងារគឡTorque Wrenches 1/4" 1-5NM Art. No. 0714 71 22
ដងារគឡ3/4" TORQUE WRENCHArt. No. 0714 71 25
ដងារគឡ
កលញខល
កលញខល
ដងាបតក
ដងាបកលទនយ
ដងាប ែហរ
ដងាបទាទក
ារបយ 6 ង
ារប 6 ង
ារបយញក
3/4" TORQUE WRENCH
Art. No. 0714 71 26
ដងារគឡTorque Wrenches 1/2"
Art. No. 0714 71 23 Art. No. 0714 71 24
Tip size: 1/4 inchMin./max. torquemeasuring range: 1-5 Nm
Length: 170 mmMin./max. torque measuringrange (inches): 10-50 lbf.in
Art. No. 0714 71 20
Torque wrench reverse ratchet 1/4 inch
ឧបករណជាងTOOLS
Tools 11Wuerth Cambodiahttps://eshop.wuerth.de
External drive: 1/4 inchLength: 220 mmSuitable for right-hand tightening: YesSuitable for left-hand tightening: No
External drive: 1/2 inchMin./max. torque measuringrange: 20-100 Nm
Tip size: 1/2 inch, Length: 570 mmMin./max. torque measuring range60-300 Nm
Tip size: 1/2 inch, Length: 440 mmMin./max. torque measuring range40-200 Nm
External drive: 3/4 inchHead diameter: 75 mmLength: 1750 mm
External drive: 3/4 inchHead diameter: 60 mmLength: 850 mm
Version: Tube straightPipe length: 320 mmAir consumption: 500 l/minNozzle hole diameter: 2.9 mm
Min./max. temperature conditions:-20 to 60 °CMax. working pressure: 16 barMaterial: Polyoxymethylene
Nozzle hole diameter: 1.5 mmMaterial: Aluminium diecasting
Length: 250 mmLength in inches: 10 inVersion: Polished headSurface: Phosphated
Length: 280 mmLength in inches: 11 inVersion: Polished headSurface: Phosphated
Min./max. torque measuring range:300-1000 NmMin./max. torque measuringrange (inches): 225-740 lbf.in
Min./max. torque measuring range110-550 NmMin./max. torque measuring range(inches) 80-405 lbf.in
Length: 350 mmMin./max. torque measuring range(inches): 15-80 lbf.ft
Min./max. torque measuring range:4-20 NmMin./max. torque measuring range (inches):40-180 lbf.inning: No
Art. No. 0714 92 13
Air Blast Gun
Blow Gun 90 MM
Art. No. 0714 921 1
Art. No. 0715 02 03
Nipper Pliers 250 MM Long
Art. No. 0715 02 07
Rabit Pliers 280MM Long
Length: 200 mmJaws length: 45 mmHook length: 10 mm
Angle of jaws: 27 DegreeMaterial: Chrome-vanadium steelSuitable for min. diameter: 12 mm
Art. No. 0715 02 20
Circlip Pliers 200 MM Long
Length in inches: 7 inLength: 180 mmJaws thickness: 11 mmMin./max. grip range:10-36 mm
Min./max. grip range in inches:1/8-1-1/2 inLength of gripping jaws: 31 mmWidth of clamping jaw: 12 mmMaterial: Chrome-vanadium steelArt. No. 0715 02 33
Waterpump Pliers Cobra 180MM
1/2”
1/2”
1/2”
Triple square, shortSurface: Chrome-platedDrive: 1/2" square socket,ball catch grooveTip: Triple square
Drive: 1/2 inchWidth across flats: 5 mmTip type: For internal hexagon
Blade length: 140 mmLength: 180 mm
For TX screws, short, Design: ShortSurface: chrome-platedDrive: 1/2" square socket,ball catch groove, Tip: For TX screws
Art. No. 0715 133 30 (T30)
Art. No. 0715 133 40 (T40)Torx 1/2" Socket Driver Bit Inner
Art. No. 0715 137 052
Art. No. 0715 138 08 (M 8 x 60)
Art. No. 0715 138 05 (M 5 x 60)
Art. No. 0715 138 101(M 10x100)
Art. No. 0715 138 12 (M12 x 60)
Art. No. 0715 138 121(M12 x 100)
1/2" Screwdriver Bit Hex 5x180
1/2" Socket Wrench XZN
Art. No. 0715 261 36
កលតសបារប
ារប 6 ង
ារត
ារត
ឈតារនឈតខ 9 េដម
ឈតារនខ 10 េដម (ឣង)
ឈតានង 9 េដម
ឈតារនង 9 េដម
ឈតារនង 9 េដម
ឈតារយ
ារននកលមល
ដងារឣករ T
កស
ឈតារន
ឈតទណវសន
Impact Ring-Wrenches AF 36
ារចានាង
ារចាន
ឧបករណជាងTOOLS
Tools 12Wuerth Cambodiahttps://eshop.wuerth.de
Width across flats: 36 mmLength: 205 mm
Tip type: Twelve-sided headRing thickness: 18 mmExternal diameter of ring: 58 mm
Art. No. 0715 27 36
OPEN-END SLUGGING WRENCH AF 36 Width across flats: 36 mm
Art. No. 0715 31 100
Allen Key SetAllen key sliding set short 9 pcs.ANGLSCRDR-SET-(1,5-10)-9PCSZEBRA
Allen key sliding set, long, 9 pcsANGLSCRDR-SET-LONG-(1,5-10MM)-9PCS ZEBRA
Tip type: Internal hexagonNumber of pieces in assortment/set:9 PCS
Art. No. 0715 31 120
Allen Key SetTip type: For internal hexagonNumber of pieces in assortment/set:9 PCS
Art. No. 0715 31 55
Allen Key Set on a ring 8 partsTip type: Internal hexagonNumber of piecesin assortment/set: 8 PCS
Number of piecesin assortment/set: 8 PCS
Hexagon blade, long version with ball head 9pcs 1.5-10MM.1 Plastic holder
Max. loading weight: 600 gHead diameter: 8 mmLength: 460 mm
TX, in plastic holder, 8 pcs., short version. TX socketRound blade. Bright nickel-platedContents: TX 9, 10, 15, 20, 25, 27, 30, 40
Tip size: 10 mmShort-limb dimension: 50 mmLong-limb dimension: 221 mm
Set of hexagon socket offsetscrew keys-long (1,5-10mm)-9pcsISO 2936L (similar to DIN 911)
Hexagon blade without ball head,bright nickel-plated, chamfered ends,long version.
Art. No. 0715 31 56
Hexagon Offset Screwdriver Set 2.5-10
Art. No. 0715 31 900
Angled Screwdriver –set
Art. No. 0715 311 110
Hexagon Socket Offset Screw KeyBright nickel-plated. Chamfered front edges. Tip type:Internal hexagon inchContents: 1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 1/4, 5/16, 3/8, 1/2 inchNumber of pieces in assortment/set: 10 PCS
Width across flats: 10 mmHandle width x handle length: 34 x 86 mmSocket wrench external diameter: 15 mmBlade length: 350 mm
Art. No. 0715 311 56
Allen key set
Art. No. 0715 33 141
Socket Wrench Screw Driver with T-handle 10 MM
Art. No. 0715 35 35
Magnet Lifter
Art. No. 0715 36 100
Tx offet srewdriver set
Art. No. 0715 40 100
Hexagon socket offset screw key with ball head
Drive: 1 inchTip size: 3/4 inchSocket wrench external diameter: 48 mmLength: 66 mm
Metric, hexagon. Version: ShortSurface: chrome-plated, ground/mattDrive: 3/4 inch square drive, pin latchStandard: DIN 3124, ISO 2725m
Ring thickness: 9 mmRing thickness 2: 8.5 mmLength: 185 mm2725m
Width across flats: 13 x 17 mmExternal diameter of ring: 21.5 mmExternal diameter of ring 2: 25 mm
Art. No. 0715 141 10
3/4" CONNECTOR
Art. No. 0715 229 10 (WS0-29)
Art. No. 0715 229 12 (WS0-34)
Art. No. 0715 229 08 (WS0-24)
Art. No. 0715 23 19
Single open end spannerjaw adjustable
Double ring spanner, matric
Art. No. 0715 142 32 (32 MM)
Art. No. 0715 142 27 (27 MM)
Art. No. 0715 142 22 (22 MM)Art. No. 0715 142 24 (24 MM)
Art. No. 0715 142 30 (30 MM)3/4" Hexagon Socket, Metric
Special puller tool for motor vehiclesExtremely simple and rapid applicationRolled, hardened and burnished spindleDrop-forged body
For easy and gentle ejection of balljoint bolts on push rods and tie rods
Display: LEDIP protection class: IP 65Width: 50 mmLength: 200 mm
Display: LEDWidth: 5 mmLength: 150 mm
Min. voltage measuring range:6 V/AC/DCMax. voltage measuring range:400 V/AC/DC
Min. voltage measuring range6 V/DCMax. voltage measuring range48 V/DC
Art. No. 0715 52 29 (D= 23MM)
Art. No. 0715 52 30 (D= 29MM)Socket Joint Extractorឧបករណាះរទល
ឧបករណសង
ឧបករណសងរថយន
ឧបករណស Solenoid Valve
ឧបករណសសតណព Laser
បចសង ង (DOT 4)
បចសង ង
ឣម ដប (AC/DC)
ដបបលតពសង
ឧបករណបលពសង
ឣម
Art. No. 0715 53 06
Art. No. 0715 53 07
Elmo Mini Tester (AC/DC) 6-400 V
Voltage Tester 3-48V
Art. No. 0715 53 110
Infrared Thermometer with LaserAutomatic switch-off: 5 s
ឧបករណជាងTOOLS
Tools 13Wuerth Cambodiahttps://eshop.wuerth.de
Min./max. spectral range: 8-14 µmMin. spectral range: 8 µmMax. spectral range: 14 µmReaction time: 150 msNominal voltage: 9 V/DC
Min./max. temperature measuring range: -50 to 650 °CMin. temperature measuring range: -50 °CMax. temperature measuring range: 650 °CThermometer measuring cone: 12:1Rechargeable battery/battery designation:9 V block; PP3; F22
Test tip lights up without metallic contact as soon as a magnetic field ispresent – it reacts to magnetic fields, excited by direct voltage, alternatingvoltage or permanent magnetsNumber of rechargeable batteries/batteries: 2 PCS
Brake fluid tester for DOT3/DOT4/DOT5.1BRKFLUDTEST-EL-(DOT3/DOT4/DOT5.1)During every vehicle inspection or service acceptance
Applications in passenger vehicles, commercial vehicles, motorcycles,workshops and service sectors.Instructions: Clean probe with water after use.
Art. No. 0715 53 150
Magnetic field tester
Excellent handling and extremely user friendlyHandy, compact size. Fits into any waistcoat pocketBar graph display with 42 segments and 4000 digitsIncluding test leads and high-quality transport case
0 - 600 V, 0 - 200mA, 0 - 2 MΩCAT III/1000V, LED Flashlight
Art. No. 0715 53 200
Brake Fluid Tester
Art. No. 0715 53 220
Brake Fluid Tester
Art. No. 0715 53 390
Digital Multimeter Pocket
Art. No. 0715 53 710
Current Clamp
Width: 30 cmHeight: 45 cmTip diameter: 5.5 mmHose length: 1 m
Number of rechargeablebatteries/batteries: 4.0 PCSIP protection class: IP 57Max. temperature conditions: 55.0 °CProduct weight (per item): 1480 g
For valve inserts and capsLength: 150 mm
Acc. to EN12645:19984 unit settings (BAR, PSI, KPA, KGF)1.5 m hose. Comfortable rubber gripClip-on air chuckGrip mounted inflation/deflation lever
Designed for easy removal of O-rings, split pins, seals andbushes in various mechanical applications
Back light featureMeasuring range: 0-12 BAR (0-175 PSI)Reading accuracy is 0.01 BAR (0.1 PSI)Max. inlet pressure is 15 BAR (218 PSI)Includes 2 x AAA battery
Art. No. 0715 53 962
Basic Video Endoscope
តពនតកងសន
បាះបណលល
ឈតាះរង
ឡសបកង Digital
Art. No. 0715 54 00For Valve Cores Lever
Art. No. 0715 54 071
Digital Tire Filler Gauge 0-12BAR
Art. No. 0715 55 345
Hook & Pick Sets
Length: 240 mmLength in inches: 9 1/2 inSurface: Nickel-plated
Min./max. piston diameter: 105-160 mmMin./max. piston diameter in inches3-1/2-5-1/2 inArt. No. 0715 57 25
Piston Sealing Pliers
Min./max. piston diameter: 60-125 mmHeight: 80 mm. Number of tie straps: 2 PCSMin./max. clamping width: 60-125 mm
Min./max. piston diameter:90-175 mmHeight: 165 mm
Art. No. 0715 57 27 Art. No. 0715 57 26
Piston Ring Clamping Jaws
27-piece scraper set with 4 different scraper blades and carpet knifeNumber of pieces in assortment/set: 27 PCS
Material: SteelMaterial of the handle: WoodLength of handle: 278 mm
Length: 330 mmHammer weight: 655 g
Art. No. 0715 72 58
Art. No. 0715 66 40
Art. No. 0715 66 057(L100MM-W18MM)Art. No. 0715 66 077(L100MM-W9MM)
Non-Rebounding Hammer D50 MM
Scraper and Blade Set
Art. No. 0715 72 10
Rubber Hammer D40mm
Break-Off Blades បត
ារបសបាះាង
ឈតបតាស
ញញរជរ (ទន)
ញញរជរ (រង)
ញញរ
ៀប
ៀប Digital
ៀប
ឧបករណជាងTOOLS
Tools 14Wuerth Cambodiahttps://eshop.wuerth.de
Length: 420 mmHammer weight: 1650 g
10 pc. Dispenser boxMaterial: SK2 SteelEasy Break-off function
Art. No. 0715 731 50
Mechanics Hammer 500g Hammer weight: 500 gLength: 320 mm
Art. No. 0715 74 46
Pry bar, roll head
Drive: 1/4 inchDrive type : Square-cutLength: 85 mm
Special Airbag Socket Wrench, 1/4" T30 x 85mm
Length: 400 mmShaft diameter: 14 mmMaterial: Chrome-vanadium steel
Art. No. 0715 76 01
Art. No. 0715 76 02VERNIER CALLIPERS
Art. No. 0715 76 11
Art. No. 0715 57 59
Special Airbag Socket Wrench
Digital Caliper
Vernier scale: ,0.05 mm, Length of jaw: 40 mmVernier scale (imperial): 1/128 inchMax. length measuring range: 150 mmMin./max. length measuring range: 0-150 mm
Absolute length measuring accuracy:0.03 mmMax. length measuring range: 150 mm
Min./max. temperature conditions:5 to 40 °CLength of jaw: 40 mm
Vernier scale: 1/128 inchLength of jaw: 80 mm
Operation radius: 255 mmHeight: 340 mm
Min./max. length measuring range: 0-10 mmScale value: 0.01 mmTolerance class: 8h6
Max. length measuring range: 250 mmMin./max. length measuring range:0-250 mmArt. No. 0715 76 13
Precision Caliper Workshop
Art. No. 0715 76 202 Art. No. 0715 762 01
Magnet hide andPRECISION DIAL GAUGE
Art. No. 0715 761 11(25-50MM)
Art. No. 0715 761 10(5-30MM)
Art. No. 0715 761 13(75-100MM)
Art. No. 0715 761 12(50-75MM)
Internal Micrometer Accuracy to DIN 863Scales matt chrome-platedMeasuring surfaces carbide-tippedWith ratchet. Supplied in wooden case
Art. No. 0715 93 90
Waste Oil Collector 90 L
ឧបករណបមងសន
ទាបមងសន
ឧបករណងងសនContainer capacity: 90 LMin./max. height: 1400-1900 mmTray diameter: 580 mmTray height: 300 mmTray capacity: 13 L
Art. No. 0715 93 91
Scavenging Equipment 90 L
Art. No. 0715 93 912 រង (5MM, 700MM)
Art. No. 0715 93 911 ទន (5MM, 700MM)
Art. No. 0715 93 913 ទន (6MM, 700MM)
Art. No. 0715 93 914 រង (6MM, 700MM)
Art. No. 0715 93 915 ទន (7MM, 1000MM)
Art. No. 0715 93 916 ទន (8MM, 700MM)
Art. No. 0715 93 918 កលបមសប BMWReplacement Suction Pipe
Container capacity: 90 LMin./max suction capacity: 1-1,5 l/minSuction-head volume : 8 LHeight: 1300 mmConditions for suction capacity: with hot oil
Length x width x height: 430 x 200 x 200 mmColour: BlueMaterial: Sheet steel
Solid sheet steel designCentral locking. 3 drawersWeight: 25 kgOne pc big-sized oval-shapedside handle
Solid4“ × 2“ PP casters, 2 fixed and2 swivel with side brakesOverall size (w/o casters):572 × 402 × 640 mm (W × D × H)Color: Housing RAL3020 & Drawer RAL7043
Lifting capacity (factory setting): 5.5 kgMin./max. load capacity: 3-5,5 kgMax. cable pull-out length: 2 mMaterial of the housing: Special plastic
Art. No. 0764 000 013
Art. No. 0715 938 36
Art. No. 0715 93 20
Art. No. 0715 930 314
LED Digital Thermometer
Spring tensioner
Tool Box Standard, 5, L430 MM
Service cart, 3-drawers
ឧបករណសសតណព
ឧបករណកឣាគយ
ពល
ឣពល
ពលស UV
ពល LED
ឧបករណសច បសសនក
ឧបករណសពនធងទកក
ឣបារ
ទការ
Nitrogen Pressure Reducer2.5m Blue
ឧបករណជាងTOOLS
Tools 15Wuerth Cambodiahttps://eshop.wuerth.de
Art. No. 0764 000 560
Min./max. temperature measuring range: -40 to 50 °CEnables you to measure temperatures in heating, air conditioning andventilation systems
(15 A) - Recommended for batterycapacities between 40 and 300 Ah.(4 A) - Can be used for 12-V batterieswith capacities from 3–80 Ah.Standard charging
Tests for leaks in air-conditioning system using the noise created by nitrogenescaping from the leak at high pressure (up to 15 bar) setting range from0 to 35 bar; can also be used for flushingNotice: Only use on drained air conditioning systems!
Leak detector Techno Tools D-440A
Art. No. 0764 000 700
To detect leaks in CFC, HFC and HCFC refrigerant (including mixtures)Also suitable for HFO 1234YF no additional consumables needed for detecting leaksVisual and acoustic warning signal (acoustic warning can be deactivated)Sensor tip with LED warning light, making searching even easierDevice automatically switches to zero setting (ambient air) battery status indicatorSupplied with 4 x AA alkaline batteries
Water-proof and dust-proof (not suitable as a diver's lamp)Ultra robustNotice: Batteries not included
Charging time approx.: 4.5 hoursDischarging time approx.:7.5 hoursGrade of protection: IP65
Power Source/Mains Line:3.7V, 2100 mAhIllumination Angle: 30°
For testing cooling circuits, radiators, cylinder head seals andwater pumps.
For users with the most demanding requirements in industry,skilled trades, hobby and leisure sectors.
Accupower Vehicle Battery Charger
Torch
Art. No. 0772 4 (4A)
Art. No. 0772 15 (15A)
Art. No. 0827 805 020
Min./max. wavelength: 395-410 nmLighting range: 50 mIP protection class: IP 67Length: 125 mm. Diameter: 32 mm
Rechargeable battery/battery designation:Micro AAA; LR03; AM4Number of rechargeable batteries/batteries: 3Material of the housing: Aluminium
LED UV test torchArt. No. 0827 807 201
Plastic LED Torch, L-13 CM
Art. No. 0827 901
Wuerth LED Hand Lamp 21+5 LEDS,IP65
Art. No. 0827 940 126
Cooling System Tester with Bladder
Art. No. 0853 52
Min. temperature conditions: -40 °CSuction volume: 52 cm³Length: 155 mm
Pipe length: 52 mmLength: 255 mm
Outer diameter of pipe: 5.5 mmMax. contents: 18 cm³
Anti-freeze Coolant Testerឧបករណស Coolant
ងញវ
ងញ Cavity Wax
ឧបករណសទកសតគយ
Art. No. 0853 600 1
Battery Acid Tester Art. No. 0853 600 2
Manual Cartridge Gun, Basic Version 310 MLVersion: SimpleColour: Red
For appl
MANUAL CARTRIDGE GUN BASICArt. No. 0891 001
Spraygun W.Canister Art. No. 0891 100
DN nominal width: DN 45Material: Plastic
Immediate power transmission to the push rod possible.Very rugged housing and feed mechanism.Excellent value for the money
Art. No. 0891 360 03
Art. No. 0891 106 0
360° PUMP SPRAY CAN
Art. No. 0891 302 01
Tap for 5L Canister
Art. No. 0891 318
Handheld Silicone Cartridge Gun
Spray Gun For UnderbodySealing 1000ML
Art. No. 0891 106 3
Spray Gun For UnderbodySealing 1000ML
ងញតរថយន
ងញតរថយន
នសបធង 5L
ងញវ
កបងញទក 360°
កបងញទក
សបបមង
សបញងខល
កបងញហម
ឧបករណញហម
ធងរសងនជពយ
ជសក
ជសក ចតជពយន
ឧបករណជាងTOOLS
Tools 16Wuerth Cambodiahttps://eshop.wuerth.de
Material: Polyethylene - PEColour: Black/whiteDiameter: 100 mm
Height: 275 mmContents: 1 L
Application pressure: 2-8 barPacked in color box
For applying stone chip and underseal products containing solvents.Variable spraying nozzleFor restoring original structures of sill panels, wheel wells, undercarriages etc.Application pressure: 3–4 bar
With variable spraying nozzle→ For restoring original structures of sillpanels, wheel wells, floor groups etc.
Art. No. 0891 370
FOAM GUNCoverage distance: 3 mConnection thread: 1/4 inchContainer capacity: 2.1 l
Min. working pressure: 150 barMax. working pressure: 200 barMax. water temperature: 80 °C
Spraying foam on floor, walls,machines or items
W 270 x L 300 xH 760mm24 L
W 400 x L 300 xH 1000mm
50 L Art. No. 0891 380 011Art. No. 0891 380 050
Painted steel foamer capacity-red
Art. No. 0891 400 1 (1 L)
Art. No. 0891 400 05 (0.5 L)
Art. No. 0891 400 2 (2 L)Measuring Jug with funnel spout
Material: PlasticColour: WhiteResistance against: Oil Acids
Art. No. 0891 410 2
Art. No. 0891 410 1PLASTIC FUNNEL
PLASTIC FUNNEL
ជសក នជពយង
ជពយង សបត
កបងកទកខលសបញសតសន
PLASTIC FUNNEL
FILLER TUBE FOR PLASTIC FUNNEL
Colour: OrangeHeight: 240 mm
Colour: OrangeHeight: 220 mmMaterial: Plastic
Resistance against: Oil FuelVersion: With thread for flexible filler pipeOuter diameter: 195 mm
Colour: OrangeHeight: 430 mmMaterial: Plastic
Colour: OrangeMaterial: Plastic
Resistance against: Oil FuelVersion: With flexible drain pipeOuter diameter: 160 mm
Outer diameter: 235 mmMaterial: PlasticResistance against: Oil Fuel
Art. No. 0891 410 40
Art. No. 0891 410 4
Art. No. 0891 503 001
Pump Spray,Empty 1000 ML Material: PlasticColour: White/redDiameter: 95 mm
Height: 275 mmContents: 1000 ml
Art. No. 0891 612Foam Spray Gun for Engine & Workshop
Art. No. 0891 621
Hand-lever Barrel Pump
Contents: 1.2 lColour: RedConnection thread:1/4 inch
Max. air consumption: 100 l/minAir consumption conditions: at 8 barMin./max. working pressure: 6-12 bar
Material: PlasticColour: Black/red
Hose length: 3 m, Length: 1230 mmPump-tube length: 930 mmPump-tube diameter: 50 mmConnection thread: 2 inchPressure ratio: 1:3Min. flow rate: 1 l/min
Max. flow volume: 25 l/minMin. air pressure: 3 barMax. air pressure: 10 barHose connection diameter: 1/2 inMax. temperature conditions: 50 °CMin. temperature conditions: 5 °C
Min. pipe length: 500 mmMax. pipe length: 900 mmConnection thread: 2 inch
Art. No. 0891 625
Compressed-air Drum Pump 200-208L
For window repairs
For injector, art. no. 0891 634 2
For UV lamp, art.: 08916332.
With injector for window repairs
Diamond-Ball Drill Bit for Windscreen RepairFor window repairs
Art. No. 0891 700 05
AP All-Round Paint Gun
Art. No. 0891 630
Curing Film for Windscreen Repair
Injector Seal for Windscreen Repair
Replacement Tube for UV Lamp
Suction Holder with Injection
DIAMOND DRILLArt. No. 0891 631 1
Art. No. 0891 632
Art. No. 0891 633 1
Art. No. 0891 634 2
សកសបអតកក
ងមលញវឣតកក
កលញ
កលញហម
កលញសបសឣាតពនសនក
ឧបករណកពក
នកលសបឧបករណអតកក
ហតកលញវសបឧបករណអតកក
អពល UV
ឧបករណជាងTOOLS
Tools 17Wuerth Cambodiahttps://eshop.wuerth.de
SP1 Foam Gun
Art. No. 0891 703 128
Applicator for disinfectant surface cleanerArt. No. 0891 764 1
Top gun
Art. No. 0891 703 140
Contents: 600 mlProduct weight (per item): 968 gColour: GreyMaterial: Plastic / metalMin. working pressure: 2 bar
Suitable for cleaning and removing dirt (yellowing caused by nicotine, footprints, roadsalt rims, dog hair etc.) in the vehicle interior and also on the outside of the vehicle.Wheel rims, door sills and door panels, ventilation shafts, instrument panel, upholsteryand headliner, shift sleeves, fuel tank filler necks, number plates and all other hard-to-reach areas, even outside of the vehicle.
Max. working pressure: 3 barWorking pressure: 2.5 barAir consumption: 200 l/minMin. spraying distance: 18 cmMax. spraying distance:23 cm
Working pressure: 6.0 – 9.2 barWeight: 950 gFilling volume: 1 liter
For disinfectant surface cleaner. Special cleaning device for fast and reliabledisinfection and cleaning. Robust design: 100 percent plastic, Resistant to most chemicalsNotice:The application device can also be used to spray thin liquids intocavities, panels and doors.
Air consumption:80 – 100 L/min. at 6.0 – 9.2 barPneumatic connection: R 1/4“
Compressed Air Fill Station
Art. No. 0891 800 001
For quick and easy pressurised filling of REFILLO & REFILLOmat cansCan be installed anywhere in the workshop
Pneumatic Refillo Can(Brake cleaner)
Art. No. 0891 800 1
Container: Spray boxContents: 400 ml
The safe and economical system formanual refilling of spray cans withactive substances and compressed air.
The safe and economical system formanual refilling of spray cans withactive substances and compressed air.
The safe and economical system formanual refilling of spray cans withactive substances and compressed air.
Container: Spray boxContents: 400 ml
Container: Spray boxContents: 400 ml
Pneumatic Refillo Can(Windscreen cleaner)Art. No. 0891 800 15
Pneumatic Refillo Can (Rost off)
Art. No. 0891 800 9
Hand Cleaner Dispenser with Wall-Holder Set
ឧបករណចចទកង
ឈតជសជលកករថយន
Art. No. 0891 901
Product weight (per item): 597 gMaterial: Plastic / metal
For repairing laminated windscreens for damage caused by stone chips.Damaged windscreens can be repaired quickly and affordably without needing to remove them.Safe: The repair effectively prevents cracking. The stability of the screen is fully retainedTÜV-approved: The operating permit remains valid thanks to the repair workFlexible: Choice of different repair resins for use regardless of weather.The repair costs are covered by virtually all insurance companies
Windscreen Repair System
Art. No. 0893 964 80
1110 x 630 x 600mmService hose length: 3m110kg, 21 barRegigerant tank: 20kg
850 x 510 x 450mmService hose length: 3m52kg, 21 barRegigerant tank: 10kg
For servicing air conditioning systemsin cars, trucks and small transporters.
For servicing air conditioning systemsin cars, trucks and small transporters.
Width: 410 mmDepth: 260 mmHeight: 315 mm
For Keeping tools oritems in cabinet drawer
(H x W x Depth)260x540x345mm
(H x W x Depth)518x540x230mm
(H x W x Depth)518x540x345mm
(H x W x Depth)518x540x345mm
(H x W x Depth)518x540x345mm
(H x W x Depth)1165x540x345mm
(H x W x Depth)518x540x345mm
(H x W x Depth)518x540x345mm
(H x W x Depth)518x540x345mm
Number of loading surfaces: 3 PCSLoading surface width x loading surface depth990 x 590 mmLoading-surface height: 190, 505, 820mmProduct weight (per item): 30000 gMaterial of the wheel: Solid rubber
Handle height: 810 mmLoad capacity: 250 kgPipe diameter: 26.9 mmWidth: 1190 mm. Depth: 600 mmWheel diameter:125 mm
Tray depth (bottom): 610 mmTray height (bottom): 40 mmPipe-wall thickness: 1.75 mmPipe diameter: 26.9 mmWheel diameter: 125 mmHandle height: 990 mm
Tray width: 1000 mm. Tray depth: 590 mmTray height: 100 mm. Width:1160 mmDepth: 610 mmTray width (bottom): 990 mmLoading-surface height: 170 mm, 800 mmMaterial of the wheel: Solid rubber
(H x W x Depth x Shelf H)518x540x345x115mm
(H x W x Depth x Shelf H)518x540x345x205mm
(H x W x Depth x Shelf H)518x540x345x195mm
(H x W x Depth x Shelf H)518x540x345x190mm
(H x W)345 x 540mm
Storage System
Storage System
Storage System
Storage System
Storage System
Storage System
Storage System
Colour: Traffic grey A RAL 7042Number of drawers: 4 PCS
......
Art. No. 0955 100
Orsy Stationary Cabinet Type A
Art. No. 0900 764 971
A/C Service Unit - Coolius 2000
Art. No. 0900 764 981
A/C Service Unit - Coolius 1000
ទ ORSY 100
ឧបករណជាងTOOLS
Tools 18Wuerth Cambodiahttps://eshop.wuerth.de
Art. No. 0955 150 108ORSY-100 Case 8 Compartments
Art. No. 0955 150 112ORSY-100 Case 12 Compartments
Art. No. 0955 150 118
ORSY-100 Case 18Compartments
Art. No. 0955 900 950
Foam Insert Compensation Shelf
Art. No. 0955 900 951
Art. No. 0961 91
Floor base
Art. No. 0962 400 204
Trolley for removed parts blue
Art. No. 0962 400 215
Trolley for removed parts
Art. No. 0961 910
Art. No. 0961 910 2
Adapter plante
Cover plate
Art. No. 0961 92
Drawer division
Art. No. 0961 921 2
Drawer division
Art. No. 0961 930 0
Top cover forshelf unit
Art. No. 0961 93
Shelf unit ORSY 1
Art. No. 0961 94
singlecompartment self
Art. No. 0961 940
Shelf unit ORSY 1
Art. No. 0961 95
Shelf unit ORSY 1
Art. No. 0961 950
Shelf unit ORSY 1
Art. No. 0961 96
Shelf unit ORSY 1
Art. No. 0961 97
Shelf unit ORSY 1
Art. No. 0961 99
Shelf unit ORSY 1
ឧបករណបលសសនក រថយនាយសយវត
ឧបករណបលសសនក រថយនាយសយវត
ឧបករណបលសសនក រថយនាយសយវត
Art. No. 14939
Coolious 2700 Service Station,Fully automatic 27kg
620 x 600 x 1090mmService hose length 3m84kg, 20barRefrigerant tank 27kg
Exact air conditioning serviceAir conditioning diagnosisAn update-capable vehicle databaseFully automatic
Small Push CartWeight 12kg, Loaded Weight 200kg,900 x 500mm, H 950mmCarrying and moving items
Medium Push CartWeight 15kg, Loaded Weight 250kg,900 x 500mm, H 900mmCarrying and moving items
Large Push CartWeight 29kg, Loaded Weight 500kg,1120 x 700mm, H 990mmCarrying and moving items
External analyzer especially for the refrigerant fluid R134a.
Art. No. 0962 610 005
Workshop Trolley, M-series5 Drawers
Art. No. 0962 400 300
Trolley for allocated parts
Art. No. 0962 400 330
Trolley for allocated parts
ទការ 5 ថត
ទការ 7 ថត
ទការ 7 ថត(នឈតារ)
Art. No. 0962 400 332
ឧបករណជាងTOOLS
Tools 19Wuerth Cambodiahttps://eshop.wuerth.de
Number of drawers: 5 PCSLoad capacity of drawer: 25 kgPullout type: Ball-bearingMaterial: Sheet steel
Load capacity: 210 kgWidth: 710 mmDepth: 410 mmHeight: 930 mm
Overall body size(Incl.handle & wheels):1017×758×450mm(H×W×D)Total loading capacity: 400kg
Solid sheet steel designThickness of the materail: 1.0mm forthe body, 0.8mm for the drawersPowder coated, sand finish.Body inRAL3000, drawers in 700
Art. No. 0962 699 207
Workshop Trolley 7-drawers Red/Black 300KG
Art. No. 0962 699 237
WRKSHPTR-400KG-RED/GREY-7DRAWERS
Art. No. 0963 500 03
Vice PS120
Art. No. 0963 50 013
Rotary Table DT120ងដង
ដង
Width: 210 mmHeight: 25 mmColour: Red
Type description: DT120Product weight (per item): 1.227 kgMaterial: Steel
Width: 120 mmHeight: 140 mmDepth: 325 mmColour: Red
Practical and complete in ORSY100 carrying caseIdeal suited for car repair shop for a quick inspection, time saving
Can be used as a preventative measure to reliably detect poor seals andleaks in R134a and R1234yf air-conditioning systems. Can also be usedin systems with electric compressors.
This battery-operated lamp is suited equally well for the detection of leakswith fluorescent light and for use as an inspection lamp.
Type description: PS120Product weight (per item): 10 kgMaterial: Steel
Art. No. 0964 251 930
RECEPTION CONCEPT SET
Art. No. 0964 764 025
A/C Leak Detection Additive Set
ឈតទកពនតលចបសនក
ពលសចរស UV
Art. No. 0964 764 095
Led UV Leak Test Torch
Art. No. 0965 014 341/4'' multi socket wrench set, 34pcs
Art. No. 0900 870 096
Refrigerant Analyzer
ឧបករណពនត នងវគសសនក
ឈតារបនគនះង
ឈតារបនគនះង
ឈតារបចរះ 32 (Multi)
ឈតារបចរះ 32 (Multi)
1 lever ratchet, 1 25 mm angled extension, 1 150 mm extension, 1 cardan joint,1 150 mm flexible extension, 1 1/4 inch screwdriver handle, 12 socket wrench inserts1 adapter with quick-change chuck, 3 PH bits, 4 hexagon socket bits, 7 TX bits, 1 slotted bit
Hexagon, 33 pieces, 1 ratchet, 2 extensions,1 cardan joint, 1 Zebra handle1 adapter with quick-change chuck, 12 socket wrench inserts, 3 PH bits, 1 slotted bit4 hexagon socket bits, 7 TX bits
33-piece assortment containing bi-hexagon multi-socket wrenches for the five most commonscrew head drives. Extremely high-quality multi-socket wrenches guarantee long service livesSupplied in a metal box and a high-quality foam insert with clamping effect, chrome-plated,polished, 1/4" square socket, Bi-hexagon, multi profile
1/4 inch:1 lever ratchet,1 25 mm angled extension,1 150 mm extension, 1 cardan joint,1 150 mm flexible extension, 1 1/4 inch screwdriver handle,1 adapter with quick-change chuck12 socket wrench inserts, 3 PH bits, 4 hexagon socket bits, 7 TX bits, 1 slotted bit1/2 inch:1 lever ratchet, 1 53 mm angled extension, 1 125 mm extension,1 250 mm extension, 1 cardan joint, 19 socket wrench inserts
Art. No. 0965 090 059
1/2'' + 1/4'' socket wrench set, 59pcs
Art. No. 0965 11 032Multi Hexagon Box Spanner Set 1/4"
Art. No. 0965 11 32Multi Hexagon Box Spanner Set 1/4"
Dim. of drawer in mmNumber
Width × Depth Height
482 × 34565 5
140 2
For TX screws, 20 pcs. 1 reversible ratchet, 1 extension, 100 mm, 1 Zebra handle, 1 cardan joint7 socket wrench inserts, 9 TX socket wrench inserts
Contents: 16 pieces1 ratchet, 1 125 mm extension, 1 250 mm extension, 1 cardan joint,12 socket wrench inserts
For hex socket screwsContents: 11 pcs. 1 ratchet, 10 socket wrench inserts for hexagon socket:Sizes 5, 6, 7, 8, 9, 10, 12, 14, 17, 19
Contents: 35 parts.1/4 inch: 1 ratchet, 2 extensions, 1 cardan joint, 13 socket wrench inserts.3/8 inch: 1 ratchet, 3 extensions, 1 cardan joint, 13 socket wrench inserts
Contents: 31 pieces8 TX socket wrench inserts, short version, 4 TX socket wrench inserts, long version4 triple square socket wrench inserts, short version, 3 triple square socket wrench inserts, long version8 hexagon socket wrench inserts, short version, 4 hexagon socket wrench inserts, long version
Bi-hexagon, 21 pcs. 1 ratchet, 1 125 mm extension,1 250 mm extension,1 cardan joint, 1 t-handle, 16 socket wrench inserts:Sizes 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22, 24, 27, 30, 32, 34
Hexagon, 23 pieces. 1 ratchet, 1 125 mm extension, 1 250 mm extension,1 cardan joint, 19 socket wrench inserts:Sizes 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24, 26, 27, 28, 30, 32
Combination adapter assortment with most common socket wrench and bit adapters, 8 pcs.6 socket wrench adapters:3/4 inch - 1/2 inch, 1/2 inch - 3/4 inch, 1/2 inch - 3/8 inch3/8 inch - 1/4 inch, 1/4 inch - 3/8 inch, 3/8 inch - 1/2 inch, 2 bit adapters
Contents: 42 pcs. 1 ratchet, 1 75 mm extension, 1 250 mm extension1 cardan joint, 14 socket wrench inserts, short, 8 socket wrench inserts, long8 socket wrench inserts, 8 TX socket wrench inserts
Art. No. 0965 11 180
1/4" SOCKET WRENCH ASSORTMENTឈតារ
Art. No. 0965 12 160
3/8" SOCKET WRENCH ASSORTMENTឈតារ
Art. No. 0965 12 42
3/8 INCH SOCKET WRENCH ASSORTMENTឈតារ
ឈតារ
ឈតារប TX
ឈតកលារន
ឈតារតច េៀន
ឈតារតច េៀន
ឈតារតច េៀនឣត
ឈតទណវស
ឈតារត
ឈតឧបករណសប
Art. No. 0965 12 80ADAPTER ASSORTMENTកលតារប
Art. No. 0965 13 110
Allen Key Socket Set 1/2" 11 partsឈតារនប
Art. No. 0965 13 20
1/2" SOCKET WRENCH ASSORTMENTឈតារប 12 ង
ឈតារប 6 ង
កលារបសងឈត
ឧបករណជាងTOOLS
Tools 20Wuerth Cambodiahttps://eshop.wuerth.de
Art. No. 0965 13 230
1/2" Socket Wrench Set, 6 Points
Art. No. 0965 13 310
1/2" SOCKET WRENCH ASSORTMENT
1/4" & 3/8" SOCKET WRENCH ASSORTMENT
Art. No. 0965 17 35
Art. No. 0965 51 100
Assortment Feeler Gauge 60 Pcs
ឈតកប
Art. No. 0965 63 100
Wuerth Assortment Striking Tool
Length of blade: 45 mmWidth of blade: 13 mm
Min./max. blade thickness: 0,08-0,6 mmNumber of pieces in assortment/set: 60 PCS
Number of pieces in assortment/set: 6 PCSAssortment suitable for ORSY 100 storage and working system
17 pcs. Contents:Internal TX: TX 20; TX 25; TX 27; TX 30; TX 40; TX 45; TX 50; TX 55; TX 60Outer TX: E 10; E 11; E 12; E 14; E 16; E 18; E 20; E 24Art. No. 0965 900 201
Socket wrench1/2 inch set
Art. No. 0965 900 207
Socket Wrench ½ inch Set
Art. No. 0965 900 401
Art. No. 0965 900 402
Combination Socket Wrench Set
12 pcsContents: Inner TX, long: TX 40, 45, 50, 55, 70Hexagon socket, long: Sizes 4, 5, 6, 7, 8, 10
17 pcs, metricRing 15° angledContents: Sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16, 17, 18, 19, 20, 21, 22
Combination socket wrench set10 pcs, metricRing 15° angledContents: Sizes 23; 24; 25; 26; 27; 28; 29; 30; 32; 34
8 pcs, metricContents:Sizes 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22
7 pcs with circular blade and holeContents:7 screwdrivers: TX 10; 15; 20; 25; 27; 30; 40
8 pieces with multi profile Is suitable for the five most common screw headdrives (hexagon metric, square metric, bi-hex metric, hexagon inch, outer TX).Contents: Ratchet combination wrench, multi bi-hex.: Sizes 8, 10, 12, 13, 16, 17, 18, 19
Art. No. 0965 900 404
Double Open-end Spanner Set
Art. No. 0965 900 406
Combo Socket Wrench Ratchet-ring Set
Art. No. 0965 900 502
Screwdriver Set
Art. No. 0965 900 703
Drift set/kit, 13pcs
Art. No. 0965 900 600
Pliers Set
Art. No. 0965 900 602 Art. No. 0965 900 603
Circlip pliers Set, 4pcs
ឈតដប ZEBRA
Art. No. 0965 900 701
Drift Set, 14pcsឈតកបនង ពងទ
ឈតកបនង ពងទ
ឈតកបនង កប
ឈតារបនងដងត
ឈតារបទណវស
ឈតារ 91 ប
ឈតារ 72 ប
ឈតទណវសយ
ឈតឧបករណផរ
អពលបភាងង
ឧបករណសបរសត
ងញញា
កលតញញា
ឈតដប ែហរ
ឧបករណជាងTOOLS
Tools 21Wuerth Cambodiahttps://eshop.wuerth.de
4 pcsContents:Side cutter 160 mm
Drift punch, dia. size: 1, 2, 3, 4Centre punch 120 mmPin punch with 180 mm pilot
2-component pin punch, 150 mm:dia. 2, 3, 4, 5, 6 mmCentre punch, 120 mm: dia. 2, 3Drift punch 120 mm, Ø 2, 4
Flat file, L x W: 200 x 5 mmRound file L x W: 200 x 8 mmSquare file L x W: 200 x 8 mmTriangular file L x W: 200 x 14 mm
3/8 inch, Extension: 75, 125, 250 mmCardan joint, RatchetSocket wrench inserts, metric, hex. Socket wrench inserts, outer TXSocket wrench inserts, inner TXSocket wrench inserts, metric, long
XZN multipoint bit, 75 mm: M 6, 8, 10, 12Wedge shape RI bit, 30 mm: RI 5, 6, 7, 8, 9, 10, 12, 13, 14Wedge shape RI bit, 75 mm: RI 5, 6, 8, 10PH 2, 30 mm + PH 3, 30 mmEmpty foam insert, size 2
Adapter for 3/8 inch ratchet, 29 mm,adapter for 1/2 inch ratchet, 37 mmTX bits with hole, 30 mm: TX 20, 25, 27, 30, 40, 45, 50, 55TX bits without hole, 75 mm: TX 20, 25, 27, 30, 40, 45, 50, 55Hexagon socket bit, 30 mm: Sizes 5, 6, 7, 8, 10XZN multipoint bit, 30 mm: M 5, 6, 8, 10, 12
1/4 inch, Socket wrench insert, metric, hexagonSocket wrench inserts, outer TXSocket wrench inserts, inner TXRatchet, Cardan joint, ExtensionSocket wrench inserts, metric, longConnector 1/4 inch to 3/8 inchConnector 3/8 inch to 1/4 inch
Half-round file L x W: 200 x 6,7 mmSeal scraper L x W: 150 x 25 mmFlat scraper L x W: 200 x 20 mmTriangular hollow-ground scraper L x W: 200 x 8 mmTriangular spoon scraper L x W: 200 x 8 mm
Flat chisel L x W: 125 x 16 mmFlat chisel L x W: 150 x 18 mmCross-cut chisel L x W: 125 x 18 mmMachinist's hammer 500 g
Pin punch: Diameter size 2; 3; 4; 5; 6; 8Flat chisel L = 125 mm; W = 15 mmCross-cut chisel L = 125 mm; W = 5 mm
Circlip pliers for 19-60 mm hole, straightCirclip pliers for 19-60 mm hole, curvedCirclip pliers for shaft 19-60 mm, straightCirclip pliers for shaft 19-60 mm, curved
Circlip pliers for 12-25 mm hole, straightCirclip pliers for 19-60 mm hole, straightCirclip pliers for shaft 19-60 mm, straightCirclip pliers for shaft 10-25 mm, straight
Combination pliers 180 mmSnipe nose pliers 210 mmWater pump pliers 250 mm
Art. No. 0965 900 802
Set mixed file, 9pcs
Art. No. 0965 900 903
3/8 + 1/4 inch socket wrench,assortment, 91 pcs
Art. No. 0965 900 906
Bit assortment 47 pcs
Art. No. 0965 93 125
Tool assortment/set, mixed 72pcs
Art. No. 0965 93 120
Universal Tool set 91pcs
This 91-piece tool case is ideal for use on the move.Includes 91 toolsExtensive set, All common tools in one case,High-quality case:Plastic case with aluminium hinged lockDimensions: 423 x 360 x 86 mm
Complete tool case, exclusive FC Bayern München Edition, 72 pcs.High-quality and extensive professional setPlastic case with aluminium fastenerIncludes 2 pairs of assembly gloves, sizes 9 and 10 in FC Bayern München design
Set of ZEBRA screwdrivers, Torx, 7 pcs.TX10; 15; 20; 25; 27; 30; 40.Deep-drawing part
Set light in working area
In ORSY 100 assortment case with accessories. Ready to solder in five secondsPlastic housing with inbuilt illumination of soldering pointTwo-core cable with European plug. Insulated in accordance with international standardsWeight 650 g. Case fits ORSY 100 shelving
Art. No. 0965 935 20
Screwdriver set
Width of band: 50 mmWith protective coverRetractable blade with protective cover protects against injuriesErgonomic soft grip for user-friendly and easy handlingAdjustable roller brake for simple application
Length: 340 mmProduct weight (per item): 129 g
Art. No. 0985 052
Packing Tape Dispenser B-50 MM
Material: SteelLength: 370 mmWorking pressure: 400 barNLGI grade: 2
Product weight (per item): 1287 gMax. working pressure: 800 barMaterial of the hose: Synthetic rubberMaterial of the grip handle: PolyethyleneArt. No. 0986 00
Hand Lever Grease Gun
Art. No. 0986 002REINFORCED RUBBER HOSE
Art. No. 0965 94 01
Soldering Gun Set with Accessories
Art. No. 0981 141 5
Work Lamp 72W
Product weight (per item): 703 g
Flow capacity: 3 l/minHeating power: 1000 WHeight: 122 cm, Width: 102 cmOperating hour meter: 420 hNominal voltage: 230 V/AC
Total toe-in: ±4° (±2')K.P.I: ±20° (±3')Thrust Angle: ±2° (±2')
Voltage: AC220V or DC12VMaximum power: 250WPressure gauge: 0 - 150psiLength of oil return pipe: 2.5mLength of oil outing pipe: 2.5m
Rim material: Steel, Al., AlloyMax. wheel diameter: 39"Max. wheel width: 14"Inter clamp: 13"-23"Outer clamp: 11"-21"With optional adapters
Max. wheel weight 65Kg/143 lbMax. tire diameter 47"Rim diameter 10" - 24"Rim width 5" - 14"Balancing speed 200rpm
Max. wheel weight 65KGRim diameter 9.5''-26''Rim width 2.5''-21''Balancing speed 220RPM
Power Supply: 220V/50HZ/1PHInput power: 5.7KVANo-load voltage: 16-34VProtection degree: 1P21SInsulation class: F
Welding current range: 35-210AWeilding wire spool dia.: 15KG¢300Flux cored wire: 0.8-1.0. Steel wire: 0.8-1.0Aluminum wire: 0.8. Stainless steel wire: 0.8Duty Cycle: 25%.
Size W*D*H(mm): 728*528*400N.W.: 23 kgG.W.: 28 kgShell material: steel/FRP
N.W. (kg) 77G.W.(kg) 90Package Size(mm) 560*370*910
Capacity (ton) 1 TonMin.Height(mm) 830Max. Height(m m) 1800
Balancing accuracy 1gPower supply 220V/110VMeasuring time 6-9sNoise level <70dB
Balancing accuracy 1gPower supply:110V 60Hz 1 Φ/230V 50Hz 1ΦMeasuring time 6-8sNoise level ≤65dB
for Motorcycle: 14"-23"Power supply: 110V/220V/380V1Ph/3Ph 50/60HzMotor power: 0.75KW-1.1KWAir supply: 8-10BarNoise level: <75dB
Workshop
Length of oil exhaust pipe: 1mFilter accuracy: 5umFuel tank: 20L x 2Equivalent replacement error: + 100gNoise: <70db
Camber: ±8° (±2') Caster: ±20°(±3')Front wheel set back:±2° (±2')Rear wheel set back:±2° (±2')
Material of the tank:LDPE - low density polyethylene, double-walledPump power: 40 W, Load capacity: 250 kgWorking height: 95 cm, Depth: 77 cmMaterial of the heater: Stainless steel
Art. No. 1071 500
3D wheel alignerm 220V/50Hz/1Ph
Art. No. 0986 003Hydraulic Mouth Piece M 10x2
Art. No. 0986 02
Filling System for Grease
កលតញញា
សបញញា
Art. No. 0986 021
Filling Hose for Central lubricatingទាតញញា
Art. No. 0986 05
Hand Lever Grease Gun Lube Shuttleងញញា
ធងសបងសតឧបករណង
ឧបករណសកងរថយន
ឧបករណសអពលរថយន
ឧបករណអបខរថយន
បសផរ
Art. No. 0995 000 000
Parts Cleaner
ឧបករណជាងTOOLS
Tools 22Wuerth Cambodiahttps://eshop.wuerth.de
សនបរងអបខាយ សយវត
Product weight (per item): 32.5 g
Material: SteelPiston material: BrassLid diameter: 365 mmHeight: 535 mm
Material: SteelSurface: GalvanisedLength: 380 mmNLGI grade: 2
Product weight (per item): 0.9 kgWorking pressure: 400 barMax. working pressure: 800 bar
Gasket material: Nitrile butadiene rubber (NBR)Suitable for inner diameter of 25-kg grease bucket:300-335 mmProduct weight (per item): 6055 g
Art. No. 1071 501 30
ATF cleaner and changer, standard machine 220V/50Hz/1Ph
Art. No. 1071 502
Beam tester 220V/50Hz/1Ph
Art. No. 1071 503
សនបរកងរថយន
សនថងកងរថយន
Art. No. 1071 503 1
Tire changer with assistant arm220V/50Hz/1Ph
Art. No. 1071 504
Art. No. 1071 504 2
Wheel balancer with hood220V/50Hz/1Ph
សនថងកងរថយន
ទាខលនងង
Art. No. 1071 504 1
Wheel balancer with hood,standar machine
Art. No. 1071 505
Two in one hose reel Iair and cord
Art. No. 1071 506
Transmission jack 1ton
Art. No. 1071 507
Welding machine 220V/50Hz/1Ph
Number of pieces in assortment/set: 93 PCSCabinet dimensions: 495 x 355 x 195 mmContent: 40 Pneusil WP 3, 48 Pneusil WP 6, 1 HM cutter 3 mm1 HSS cutter 6 mm, 1 sanding block, 1 press-on roller, 1 vulcanising cement
ដយ
Art. No. 1071 508
Electrical Auto Fuel Injector Tester& Cleaner 220v/ 50Hz/1Ph
Art. No. 1071 515 0
Hydraulic bottle jacks-50tons
ដយ
Art. No. 1071 516
Hydraulic bottle jacks-6tons
ដយ
ដយ
ងទរ
Art. No. 1071 521 0
Hydraulic trolley jack 10 ton
Art. No. 1071 523
Hydraulic trolley jack 3 tons
Art. No. 1071 530
Jack stand 3T
Art. No. 1071 550
Chain block 2 T
Art. No. 1071 700
Nittrogen inflater,standard machine
Art. No. 1071 800
Wall mounted engine oildispenser kit
បងង 4
សននន
ឧបករណបមងហយខល
Art. No. 0964 879
PNEUSIL REPAIR SETឈតបះកងរថយន
បងង 2
Art. No. 1071 601
Four post lift,loading capacity5000kg,standard
Art. No. 1071 600 36(3600 kg)
Art. No. 1071 600 45(4500 kg)
Car lift,loading capacityelectrical release)
ក
ក
Art. No. 1071 540
Car creeper 40"
សនស នងងសតពនបចាយសយវត
ឧបករណជាងTOOLS
Tools 23Wuerth Cambodiahttps://eshop.wuerth.de
Power Supply: 220V/50HZ/1PHDimensions(LxWXH): 380mmx450mmx470mmWeight of table: 20kgDimensions of table: 400mmX450mmX730mmWeight of main frame: 17kg
Capacity (ton): 50 TonsMin.Height(mm): 236Lift height(mm): 120
Capacity (ton): 6 TonsMin.Height(mm): 216Lift height(mm): 127Adjustable height(mm): 70
Capacity (ton): 10 TonsMin.Height: 160 mmMax. Height: 560 mm
Capacity (ton): 3 TonsMin.Height(mm): 130Max. Height(mm): 410
Capacity (ton): 3 TonsMin.Height(mm): 285Max. Height(mm): 425
G.W.(kg): 8.4N.W.(kg): 7.4
Lift: 2.5mLoad: 2 T
Lifting Time: 55 S, Power: 2.2 KWRated Oil Pressure: 18 MpaInside Column: 2850 mm, Post Height: 3892 mmLifting Height: 1930 mm, Min.Height: 90 mmVoltage: 220V/240V/380V/415V, 1/3PH
Lifting capacity: 5000 KGLifting height: 1850mmGross weight: 1824kgMotor power: 3.0KWOverall height: 2100mm
Connection hose 2mPump 18L/min R.5:1Bung adaptorHose reel 10m
Digtal meter gunDirp-traySuitbale for drums of 180-220kgNipples 1/2"x1/2"G. M/M
Lifting time: 55-60sPower supply:220/240V/380V/415V,1/3PHRated oil pressure: 20MPaNoise level: <70dB
Overall size(mm): 1025*420*115Package size(mm): 1040*435*83
N.W. (kg): 6.3G.W.(kg): 6.7Package Size(mm): 210*190*360
N.W. (kg): 16G.W.(kg): 16.5Package Size(mm): 630*280*160
Gross-Weight: 150 kgLifting-Height: 400 mmNet-Weight: 129 kg
N.W. (kg): 4.3G.W.(kg): 4.6Package Size(mm): 260*240*250
N.W. (kg): 28.3G.W.(kg): 29Package Size(mm): 265*190*255
Compact, powerful drill for fast, powerful drilling in wood, aluminium, metal and stainless steel. Ergonomic design. Excellent weight/power ratio for effortless workBelt clip for simple handling. Robust metal quick-action drill chuckEnsures high precision and a long service life. Electronic speed control Continuously adjustable speed permits gentle force delivery and allows the device to be matched to any application. Clockwise/anti-clockwise rotation Inserted screws can be removed. Thanks to direct carbon brush changeover, maximum torque is achieved in both running directions.
ឧបករណជាងTOOLS
Tools 24Wuerth Cambodiahttps://eshop.wuerth.de
Art. No. 20 703 031 2
1/2" Air Rachet Wrench (EP 212L)ារខល
មទរនថ
មទរនថ
មទរនថ
មទរនថ
មទរនង
មទរនង
មទរនង
មទរនង
មទរនង
មទរបង
Art. No. 5700 100 2
Cordless Screwdriver S 10-A(with charger)
Art. No. 0702 327 1
Compact Drill BM 10-E
Free Speed: 200 RPMOverall length:10.23” (260 mm)Max torque: 80 Ft/Lbs (108 Nm)
Simple, lightweight and manageable hammer drillCompactErgonomic shape and lightweight for continuous use without rapidsigns of fatigue. Concrete, masonry
Extremely powerful hammer drill with active vibration damping. Making it ideal forseries drilling.Extremely rapid drilling progress. Low-vibration. Interchangeable drill chuck forversatile applications. Universal Ball grommet on the power cableMaterials to be processed: Concrete, masonry, wood, metal
Voltage: 230 - 240 VInput power: 650 WKeyless chuck: YesProtection class: IICable length: 2.5 m, Weight:1,65 kg
Voltage: 230 - 240 VInput power: 800 W, Impact power: 3,2 JDrill mount: SDS plusProtection class: IICable length: 4 m, Weight: 2,9 kg
Blade: Round blade,chrome platedDrive:DIN 5264-A, ISO 2380,Black PointStandard: DIN 5265
Applications:Pipes, nuts,flat workpieces.
Idling speed: 0 - 1.250 min-1Number of impacts: 0 - 4.000 min-1Max drill dia. in Steel: 13 mmMax drill dia. in Wood: 30 mmMax drill dia. in Concrete: 28 mm
Idling speed: 0 - 2.800 min-1Number of impacts: 0 - 44.800 min-1Max drill dia. in Steel: 10 mmMax drill dia. in Wood: 25 mmMax drill dia. in Concrete: 13 mm
Working Torque Range:5-70 Ft/Lbs(7-95 Nm)Recommend air pressure:90 PSI (6.35kg)
Nominal voltage: 10.8 V/DCHeight: 178 mm, Adapter type: 1/4 inchMax. drilling diameter in wood: 19 mmMax. torque hard/soft: 30 / 15 NmRechargeable battery/battery capacity: 2 Ah
Idle speed in 1st gear/2nd gear:0 - 500 / 0 - 1600 U/min(rpm)Rechargeable battery/battery capacity: 4 AhMin./max. drill chuck span width: 1,5-13 mmNumber of rechargeable batteries/batteries: 2 PCSWeight of machine with rechargeable battery: 1.7 kg
Nominal voltage: 14.4 V/DCMax. torque hard/soft: 60 / 25 NmMax. drilling diameter in steel: 13 mmMax. drilling diameter in softwood: 32 mmMax. screw diameter: 7 mmLength: 185 mm, Height: 248 mm
Nominal voltage: 18 V/DCRechargeable battery/battery capacity: 4 AhImpact energy: 1.7 JTool holding device: SDS-plusMax. drilling diameter in steel: 13 mmLength: 285 mm, Height: 218 mm
Min./max. nominal voltage: 220 / 240 V/ACMin./max. frequency: 50/60 HzPower consumption: 1,000 WOutput: 590 W, Cable length: 4 mMachine weight: 2.1 kg
Max. idling speed: 10,500 rpmThread type x spindle thread diameter: M 14 mmMax. cutoff wheel diameter: 125 mmProtection class:Protection class II / protective insulation
Min./max. idle speed: 0-1400 U/min(rpm)Min./max. impact rate: 0-4550 U/min(rpm)Weight of machine with rechargeable battery: 2.6 kgMin./max. recommended drilling diameter: 6-10 mmMin./max. recommended drilling diameterin concrete: 4-18 mm
Idle speed 1st gear max.: 400 U/min(rpm)Idle speed 2nd gear max.: 1300 U/min(rpm)Max. torque for soft screwing application: 15 NmWeight of machine with rechargeable battery:0.81 kg
Art. No. 5700 400 2
Battery-Powered Screw Driller BS 14-A Compact
Art. No. 5700 404 70
Cordless Screwdriver, BS14-A
Art. No. 5700 502 2
Battery-Powered Hammer Drill H 18-MA Compact
Art. No. 5707 009 0
Angle Grinder, Electric,125mm
Art. No. 5708 200 1
Hammer drill, electric H22-SLE
ទណវសមខសត
ដបទាទក
Art. No. 5708 204 1
Hammer Drill, Electric H28-MLS
Art. No. 5717 001 011
Electric Impact Drill EDI 13-K
Art. No. 5717 002 011
Electric Rotary Hammer Drill ERHD 28-MLS
Art. No. 5722 01 563
Water pump plier 250mm
Round blade screwdriver PH
L inch
L mm inch mm
E mm
B mm
C mm
10 250 1 30 28 16 9
Art. P. Qty.A mm B/C mm A inch0.6 × 3.5 100 70/22 1/8 × 4" 5751 231 035
121.0 × 5.5 125 100/31 7/32 × 5" 5751 231 055
1.2 × 6.5 150 110/34 1/4 × 6" 5751 231 065
1.2 × 8.0 175 122/38 5/16 × 7" 5751 231 08 6
ឧបករណជាងTOOLS
Tools 25Wuerth Cambodiahttps://eshop.wuerth.de
Blade: Round blade,chrome platedDrive: DIN 5260-PH,ISO 8764-PH,Black PointStandard: DIN 5262
Blade: Round blade,chrome platedDrive: ISO 8764-PZ,Black PointStandard: DIN 5262
ត
ទណវសមខ បន PH
Adjustable spanner
ារតចាៀនCombination spanner
Round blade screwdriver PH
ទណវសមខ បន PZRound blade screwdriver PZ
ឈតទណវសយ
ឈតទណវសយអករ T
ឈតទណវសនអករ T
Screwdriver Set 7 PCS
Art. No. 5751 900 502
ឈតទណវសមខបននងមខសត
ឈតទណវសយ
SCRDR-SET-MET-SL/PH-FAOM-6PCS
Art. No. 5751 900 514
SCRDR-THNDL-INHEX-WITH BALLHEAD-SET-6PCS
Art. No. 5751 913 062
SCRDR-SET-TX10-40-7PCS
Art. No. 5751 934 8
ឈតទណវសមខបននងមខសតSCRDR-SET-PH/SL-RDBLDE-6PCS
Art. No. 5751 942 26
ឈតារនHexagon socket offset screwkey set ball head 9PCS
Art. No. 5752 40 100
ារនHexagon socket offset screw key
SCRDR-THNDL-SET-INTX-6PCS
Art. No. 5751 914 061
Art. P. Qty.A mm B/C mm A inchPH1 80 100/31 3 1/8" 5751 232 1 12
PH2 100 110/34 4" 5751 232 2
PH3 150 122/38 6" 5751 232 3 6
Art. P. Qty.A mm B/C mm A inchPZ1 80 100/31 3 1/8" 5751 233 1
12PZ2 100 110/34 4" 5751 233 2
Art. P. Qty.A1 mm A2 mm B/C mm10 110 15 55/31.6 5751 140 10
1
15 110 15 55/31.6 5751 140 1520 110 15 55/31.6 5751 140 2025 160 18 75/45.6 5751 140 2530 160 18 75/45.6 5751 140 3040 185 18 75/45.6 5751 140 40Set Consisting of above 6 items 5751 913 062
Blade: Round blade, chrome platedDrive: Torx, black point
Art. P. Qty.A1 mm A2 mm B/C mm2.5 110 15 55/31.6 5751 132 025
1
3 110 15 55/31.6 5751 132 034 110 15 55/31.6 5751 132 045 160 18 75/45.6 5751 132 056 160 18 75/45.6 5751 132 068 200 18 75/45.6 5751 132 08
Set Consisting of above 6 items 5751 914 061
With ball head,black pointBlade: Round blade, chrome platedDrive: HEX
Art. P. Qty.A mm10 100 5751 434 10
1
15 100 5751 434 1520 100 5751 434 2025 100 5751 434 2527 100 5751 434 2730 100 5751 434 3040 100 5751 434 40
TX screwdrivers
Art. P. Qty.Art.0.6×3.5 5751 231 035 PH1 5751 232 1 11.0×5.5 5751 231 055 PH2 5751 232 21.2×6.5 5751 231 0651.2×8.0 5751 231 08
Slotted andPH screwdrivers
mm Max. L1 mm Max. L2 mm Art.1.5 90 14 5752 40 0152 100 16 5752 40 02
2.5 112 18 5752 40 0253 126 20 5752 40 034 140 25 5752 40 04
5 160 28 5752 40 056 180 32 5752 40 068 200 36 5752 40 08
10 224 40 5752 40 10
mm Max. L1 mm Max. L2 mm Art.
Set Contents mm Art.P. Qty.
9 pcs 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 5752 40 100 1
A(max.) mmL
mmL
inch B(max.) mmS
mmT
mm Art.24 200 8 53 13 7 5754 221 0830 250 10 65 16 8 5754 221 1036 300 12 77 18 10 5754 221 12
mmL
mmW1 mm
dia. Dmm
a1mm
a2mm Art.
6 100 16 10.4 4.8 3.4 5754 301 067 110 16.8 11.8 5.4 3.5 5754 301 078 115 18.7 13 5.6 3.8 5754 301 089 125 20.6 14.1 6 4 5754 301 09
10 135 22.4 16 6.3 4.5 5754 301 1011 145 24 17.2 6.8 4.9 5754 301 1112 155 26.3 18.5 7.2 5 5754 301 1213 165 28.3 19.8 8.3 5.6 5754 301 1314 171 30 21.2 8.5 5.7 5754 301 1415 185 31.9 22.6 9.2 6.1 5754 301 1516 195 34 24.1 9.3 6.5 5754 301 1617 210 35.2 25.3 9.6 6.8 5754 301 1718 220 37.5 27.2 10.1 7.2 5754 301 1819 230 39.7 28.4 10.2 7.3 5754 301 1920 240 41.4 29.5 10.8 7.4 5754 301 2021 245 43.2 31.4 11.1 7.6 5754 301 2122 248 45.3 32.4 11.7 7.9 5754 301 2223 260 47.5 34.8 12.2 8.1 5754 301 2324 270 49.5 35.5 12.8 8.4 5754 301 2425 282 51 36.4 13 8.7 5754 301 2526 290 53.5 37.9 13.3 9.1 5754 301 26
Contents: TX10, 15, 20, 25, 27, 30, 40
Contents: PH1,2; SL 0.6x3.5, 1.0x5.5, 1.2x6.5, 1.2x8.0
ឧបករណជាងTOOLS
Tools 26Wuerth Cambodiahttps://eshop.wuerth.de
ារតចាៀនCombination spanner
ារតDouble open end spanner
ារចាៀនRing spanner
ឈតារតDouble open end spanner set 12PCS6x7mm - 30x32mm, pouch
ឈតារតចាៀនCombination spanner set 17PCS6mm - 22mm, pouch
mmL
mmW1 mm
dia. Dmm
a1mm
a2mm Art.
27 300 54.8 39.4 13.9 9.1 5754 301 2728 310 56.8 42 14.8 9.7 5754 301 2829 330 60.1 43.2 15.2 9.9 5754 301 2930 330 60.1 43.2 15.2 9.9 5754 301 30
32 350 64 46.5 15.9 10.2 5754 301 3234 380 71.4 50.3 16.6 11 5754 301 3436 400 76.7 52.8 11.6 11.6 5754 301 36
Art. No. 5754 301 41
Art. No. 5754 304 43
ឈតារចាៀន
ឈតារតចាៀន
ឈតារតចាៀន
ឈតារត
Ring spanner set 12PCS6x7mm - 30x32mm, pouch
Art. No. 5754 305 42
combination spanner set, metric
Art. No. 5754 900 401
double-ended open spanner set, metricArt. No. 5754 900 404
combination spanner set, metric,
Art. No. 5754 900 403
Empty foam insertArt. No. 5757 900 952 Art. No. 5757 900 960
Drive: Ring side double hexagon
Standard:DIN 3113 / DIN 475-2
Material: Chrome-vanadium-steel
Surface: Chrome matt plated, open end polished
Geometry: Ring side 15º angled down, openend position 15º
mmL
mmb1
mmb2
mma
mm Art.6 × 7 126 16.2 17.5 3.4 5754 304 0678 × 9 142 19.2 21.4 3.6 5754 304 089
8 × 10 142 19.2 21.4 3.6 5754 304 08010 × 11 157 23.1 25.3 4.5 5754 304 10110 × 13 170 23.1 29.6 5.1 5754 304 10312 × 13 170 27.3 29.7 5.1 5754 304 12313 × 17 202 30.3 35.9 6 5754 304 13714 × 15 187 30 32.2 5.4 5754 304 14516 × 17 202 33.6 35.9 6 5754 304 16716 × 18 202 33.6 35.9 6 5754 304 16817 × 19 220 38.7 40.5 6.5 5754 304 17918 × 19 220 38.7 40.5 6.7 5754 304 18920 × 22 232 43.6 48.2 7.3 5754 304 20221 × 23 246 46 49.3 7.5 5754 304 21322 × 24 246 46 49.3 7.5 5754 304 22424 × 26 265 51.3 54 8.4 5754 304 24624 × 27 265 52 56.2 8.4 5754 304 24725 × 28 275 53.6 58.9 8.5 5754 304 25827 × 29 295 54.9 60.4 9.2 5754 304 27930 × 32 298 60.5 64.6 9.2 5754 304 30232 × 36 315 66.6 74 9.6 5754 304 326
Standard: DIN 3110 / DIN 475-2 Material: chrome-vanadium-steelSurface: chrome matt plated,heads are polished
Geometry: Angle on open side 15º
mmL
mma1
mma2
mmdia. d1
mmdia. d2
mmh
mm Art.6 × 7 175 5 5.8 10.5 11.4 19 5754 305 0678 × 9 185 6 7 13.4 14.8 21 5754 305 089
8 × 10 185 6 7 13.4 14.8 22 5754 305 08010 × 11 198 7.4 8.4 16.4 17.9 23 5754 305 10112 × 13 215 8.4 9.1 19.5 20.6 25 5754 305 12313 × 17 245 10 10.8 20.9 26.2 27 5754 305 13714 × 15 228 9.5 10.4 22.2 23 25 5754 305 14516 × 17 246 10 10.8 24.5 26 27 5754 305 16716 × 18 246 10 10.8 24.5 26 28 5754 305 16817 × 19 268 10.8 12.1 26.4 28.4 30 5754 305 17918 × 19 268 10.8 12.1 27.5 28.4 30 5754 305 18920 × 22 292 11.7 12.5 30.7 33.5 31 5754 305 20221 × 23 315 12.2 13.2 31.8 34.8 32 5754 305 21322 × 24 315 12.2 13.2 31.8 34.8 32 5754 305 22424 × 26 328 12.2 13.4 36.3 39.6 36 5754 305 24624 × 27 328 12.2 13.4 36.3 39.9 36 5754 305 24725 × 28 342 13.9 14.9 37.4 41.4 35 5754 305 25827 × 29 365 14 15.8 39.9 46.3 36 5754 305 27930 × 32 370 15.2 16 43.5 46.3 36 5754 305 30236 × 41 445 17.3 18.3 52.7 60.2 42 5754 305 361
Drive: Double hexagonStandard:DIN 838/ DIN 475-2
Material: chrome-vanadium-steelSurface: Chrome matt plated
8-piece Contents: WS6×7, 8×9, 10×11, 12×13, 14x15,16×17, 18×19, 20×22mm
11-pieceContents: WS8, 9, 10, 11, 12, 13, 14, 15, 17, 19, 22mm
17-piece Contents: WS6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22mm
Size: 555×80mmSize: 335×98mm
ឧបករណជាងTOOLS
Tools 27Wuerth Cambodiahttps://eshop.wuerth.de
ឈតារចាៀន
ឈតារប
ឈតារប
ឈតារប
ឈតារប
ឈតារប
ឈតដប
double-ring open spanner set,metric, 12-piece; Deep offset
1/4" socket set, 17PCS, matte
Art. No. 5763 11 170
1/4" socket set, 34PCS, matte
Art. No. 5763 11 340
3/8" socket set, 17PCS, matte
Art. No. 5763 12 170
1/2" socket set, 23PCS, matte
Art. No. 5763 13 230
1/2" socket set, 23PCS, matte
Art. No. 5763 13 230
set of pliers, 4-piece
Art. No. 5772 900 601
Art. No. 5754 900 405
Contents: WS6x7,8x9,10x11,12x13,14x15,16x17,18x19,20x22,21x23,24x27,25x28,30x32mm
Material: CRV Surface: Chrome matt
Supplied in a metal box with PS tray
Material: CRVSurface: Chrome mattSupplied in a metal box with PS tray
Material: CRVSurface: Chrome mattSupplied in a metal box with PS tray
Material: CRVSurface: Chrome mattSupplied in a metal box with PS tray
1/2“ set parts: Hexagon socket:WS10,11,12,13,14,15,16,17,18,19,20,21,22,23,24, 27,30,32mm;Extensions 125MM,250MM;Cardan joint; 3-way adapter 3/8“ F*1/2“ M; 1/2“ ratchet;
1/4“ set parts: Hexagon socket: WS4.5,5,5.5,6,7,8,9,10,11,12,13,14mm; Extensions 100,150mm; Cardan joint; 3-way adapter 3/8“ F*1/4“ M; 1/4“ F*1/4“ H. coupler; 1/4“ ratchet; 1/4“ driver handle; Bits: PH1/2/3, SL0.8x5.5,INHEX3/4/5/6, TX10/15/20/25/27/30/40.
Contents: Side cutter 180mm, Combination plier 180mm,Snip nose plier 200mm, Water pump plier 250mm
Next Fastener and other partsបប សរៈតប នង កងៗ
ចលលពតនលមតៈ https://eshop.wuerth.deេហយយខកដរះផលតផលលអកចងងរកPlease visit https://eshop.wuerth.de and enter article number orproduct name to search
Art. No. 0057 012 60
Hexagon Headed Bolt 8.8 933Yel/Chr 12x60
បឡង
បឡង
Fastener & Other Parts 28Wuerth Cambodiahttps://eshop.wuerth.de
Art. No. 0317 12
Steel Hex Nuts Din 934-8 ZN PLTD M 12
Art. No. 0368 08
Self-locking nuts 8MM
DIN 933 steel 8.8, galvanised, yellow chrome plated (A3C)
Art. No. 0084 16 65
Art. No. 0084 16 60
Screw, cylinder head
ISO 4762/DIN 912, steel 8.8, galvanised,blue passivated (A2K), ISO 4762 replacesDIN 912 | There is some similarity | Nominal range changed | Fine thread moved to ISO 12474.
DIN 934, steel I6I/I8I, galvanised blue, passivated (A2K)Hexagonal nuts complying with the DIN 934 standard cannot support test loadsas per DIN EN ISO 898-2.The strength class designation has two vertical bars added before andafter the strength code to differentiate.
Height: 8 mm, DIN: 985External drive: SW13Material: SteelScrewing-property class : 8
រងឣណក Art. No. 0409 10 DIN 125stainless steel A2Art. No. 0409 12
Art. No. 0409 16
Art. No. 0409 3
Art. No. 0409 4
Art. No. 0409 5
Brass with rubber insertBrake ring
o-ring
Standard: DIN 3771/ISO 1174Material: Perbunan N (nitrile rubber),hardness: 70 +/- 5 ShoreTemperature resistance: -35°C to +120°CResistant to all mineral oils, petrol, steam,lubricating grease, hot water andcompressed air.
Art. No. 0368 12
HEXAGON NUT, SELF-LOCKING,LOW PROFILE
FLAT WASHER FOR HEXAGON BOLTSAND NUTS
រងន
ឣរង
រងនបស សបង
SEALING RING, COPPER, SHAPE A
Copper Sealing Washers DIN 7603
Art. No. 0460 10 14 (10 x 14)Art. No. 0460 10 16 (10 x 16)Art. No. 0460 12 16 (12 x 16)Art. No. 0460 12 18 (12 x 18)Art. No. 0460 14 20 (14 x 20)Art. No. 0460 16 20 (16 x 20)Art. No. 0460 16 22 (16 x 22)Art. No. 0460 18 22 (18 x 22)
Art. No. 0464 12 16
Art. No. 0464 14 18
(Brake Washer 12x16 + Rubber-in 10x14)(Brake WSH BR 14x18 + Rubber-in12x16)
Art. No. 0468 020 30( NBR/Perbunan 70 20x3)Art. No. 0468 021 20(Metric 21 x 2)Art. No. 0468 022 20(Ring Metric 22 x 2)Art. No. 0468 022 30(NBR/Perbunan 70 22x3)Art. No. 0468 025 25(NBR/Perbunan 70 25x2.5)Art. No. 0468 025 30(Metric 25 x 3 )Art. No. 0468 026 30( NBR/Perbunan 70 26 x 3)Art. No. 0468 028 30(Metric 28 x 3)Art. No. 0468 030 20( Perbunan70, metric 30 x 2)Art. No. 0468 030 25(Perbunan70, metric 30 x 2.5)Art. No. 0468 030 35( Metric 30 x 3.5)Art. No. 0468 032 35(Metric 32 x 3.5)Art. No. 0468 034 30(Metric 34 x 3)Art. No. 0468 035 30(Perbunan70 metric 35 x 3)Art. No. 0468 039 30(Metric 39 x 3)Art. No. 0468 040 30(Metric 40 x 3)Art. No. 0468 042 25(Metric 42 x 2.5 )Art. No. 0468 050 26( Imperial 50.47 x 2.62)Art. No. 0468 063 35( Imperial 63.09 x 3.53 )Art. No. 0468 070 35(Perbunan 70 70 x 3.5)
Art. No. 0468 076 30(Perbunan 70 76 x 3)
Art. No. 0468 265 7(Imperial 26.57 x 3.53)
Art. No. 0468 345 2(Imperial 34.52 x 3.53)Art. No. 0468 361 0(Imperial 36.10 x 3.53)Art. No. 0468 37 47(Imperial 37.47 x 5.34 )Art. No. 0468 447( Imperial 4.47 x 1.78)Art. No. 0468 505 2(Imperial 50.52 x 1.78 )Art. No. 0468 528Imperial 5.28 x 1.78)Art. No. 0468 567 4(Perbunan70 56.74x3.53)Art. No. 0468 726 2(Perbunan70 72.62x3.53)Art. No. 0468 884 9(Perbunan 70 88.49 x 3.53)
Art. No. 0468 9 25(Imperial 9.25 x 1.78)Art. No. 0468 960 7(Imperial 6.07 x 1.78)
Art. No. 0468 012 20( NBR/Perbunan 70 12 x 2)Art. No. 0468 012 25( Perbunan 12 x 2.5)Art. No. 0468 013 10( Perbunan 13 x 1)Art. No. 0468 014 25(Metric 14 x 2.5)Art. No. 0468 015 20(Metric 15 x 2)Art. No. 0468 015 25(NBR/Perbunan 70 15x 2.5)Art. No. 0468 016 25( NBR/Perbunan 70 16 x 2.5)Art. No. 0468 017 25( NBR/Perbunan 70 17x2.5)Art. No. 0468 018 20(NBR/Perbunan 70 18 x 24 )Art. No. 0468 018 30(Metric 18 x 3)Art. No. 0468 019 25(NBR/Perbunan 70 19x2.5 )
Art. No. 0468 090 40(Perbunan 70 90 x 4 )Art. No. 0468 107 8( Imperial 10.78x2.62 )Art. No. 0468 123 7( Imperial 12.37 x 2.62)Art. No. 0468 171 3( Imperial 17.13 x 2.62)Art. No. 0468 175 50(Perbunan 70 175 x 5)Art. No. 0468 195 50(Perbunan 70 195 x 5)Art. No. 0468 200 30(Perbunan 70 200 x 3)Art. No. 0468 202 2(Imperial 20.22 x 3.53)Art. No. 0468 250 0( Imperial 25 x 3.53)Art. No. 0468 265 40(Perbunan 70 265 x 4)
Art. No. 0468 001 17(Metric Perbunan 1 x 17)Art. No. 0468 003 20(Metric 3 x 2)Art. No. 0468 004 10(Metric 4 x 1)Art. No. 0468 004 20(Metric 4 x 2)Art. No. 0468 005 20(Metric 5 x 2)Art. No. 0468 006 20(NBR/Perbunan 70 6 x 2)Art. No. 0468 007 20(Metric 7 x 2)Art. No. 0468 008 20( NBR/Perbunan 70 8 x 2)Art. No. 0468 010 20(Metric 10 x 20)Art. No. 0468 010 25(Perbunan 10 x 2.5)
Art. No. 0460 18 24 (18 x 24)Art. No. 0460 20 26 (20 x 26)Art. No. 0460 21 26 (21 x 26)Art. No. 0460 22 27 (22 x 27)Art. No. 0460 26 32 (26 x 32)Art. No. 0460 8 12 (8 x 12)Art. No. 0460 8 14 (8 x 14)
Height: 12 mm, DIN: 985External drive: SW19Material: SteelScrewing-property class : 8
Surface: Yellow galvanisedVersion: Polyamide clamping pieceThread type x nominal diameter: M8Thread type: Metric thread
Surface: GalvanisedVersion: Polyamide clamping pieceThread type x nominal diameter: M12Thread type: Metric thread
សមារៈតភាប នង កងៗFastener and other parts
Standard: DIN 3771/ISO 1174Material: Perbunan N (nitrile rubber),hardness: 70 +/- 5 ShoreTemperature resistance: -35°C to +120°C
Resistant to all mineral oils,petrol, steam, lubricatinggrease, hot water andcompressed air.
DIN 94, galvanised steel, bluepassivated (A2K)To secure castellated nuts in conjunctionwith bolts or threaded pins with split pin hole.To secure split pin bolts
For quick, problem-free and reliable bundling of cables, cable harnesses,hoses etc.
For the rapid and simple manufacture of O-rings
Boat yards, mechanical engineering,freight operations, automotive repairshops, agricultural machinery andmotorbike repair shops, bus companies etc.
Art. No. 0468 111 6( L = 1 Meter D=1.6 MM)
Art. No. 0468 024 40
Art. No. 0502 131
Art. No. 0510 6
Art. No. 0510 7
O-RING, HEAVY-DUTY(Metric 24 x 4)
O-Ring String(DIN 3771 Perbunan70 cord)
ឣរង
SPLIT PIN
STANDARD CABLE CONNECTOR WITHPLASTIC LATCH
កសក
Battery Terminal ClampsForm B(-) 70 mm²
ដបកលឤគយ
Battery Terminal ClampsForm A(+) 70 mm²
Art. No. 0555 102 2
Zebra Hose Clamp
ដបកលឤគយ
កល
Pin Housing
Socket Housing
តណាល
Art. No. 0555 102 3
Art. No. 0555 103 2 Art. No. 0555 103 3
តណញ
Scotch Lock Blue 1.00-2.5 Art. No. 0555 564
តណេភងពណៀវ
តណេភងមននាម
ាល ញ
Crimping Tool Non-Insulated Terminal
Art. No. 0558 10 Art. No. 0558 13
ដបតនងមខេភង
Cable Connectors for Ford
Art. No. 0558 409 643 Art. No. 0558 409 645
តណេភងកលច េៀនCRIMP CABLE LUG, RING CONNECTOR
តណេភងញCable Con.Ins. Female Spade Blue 6.3
Art. No. 0558 901 1
Art. No. 0558 905 1 Art. No. 0558 905 2
រតសក
ឣរង
Fastener & Other Parts 29Wuerth Cambodiahttps://eshop.wuerth.de
Art. No. 0468 112 4( L = 1 Meter D=2.4 MM)Art. No. 0468 113 0( L = 1 Meter D=3.0 MM)Art. No. 0468 115 7( L = 1 Meter D=5.7 MM)
Art. No. 0468 024 40(4.5 x 50)Art. No. 0470 5 50(5 x 50)Art. No. 0470 63 63(6.3 x 63 )Art. No. 0470 8 80(Steel 8 x 80)
Art. No. 0539 112 22(9 MM WS7 12-22)Art. No. 0539 116 27(9 MM WS7 16-27)Art. No. 0539 120 32( 9MM AF6 20-32)Art. No. 0539 125 40(9MM WS7 25-40)
Art. No. 0539 130 45(9MM AF6 30-45)Art. No. 0539 132 50(9 MM WS7 32-50)Art. No. 0539 140 60(9MM WS7 40-60)Art. No. 0539 150 70(B9MM-WS7 50-70)
Art. No. 0539 160 80(9 MM AF6 60-80)Art. No. 0539 170 90(9 MM AF6 70-90)Art. No. 0539 18 16(9MM-WS7 8-16)
For power socket wrench inserts
សមារៈតភាប នង កងៗFastener and other parts
Polarity type: MinusMax. wire cross section: 70 mm²
Polarity type: PlusMax. wire cross section: 70 mm²
TE Superseal 1.5 SeriesComplies with IEC 529 andDIN 40050 IP 67
TE Superseal 1.5 SeriesComplies with IEC 529 andDIN 40050 IP 67
For branch connections in any position requiredSimple to useOnly combination pliers required
Length: 220 mm, Material: Tool steelSurface: Burnished
Snap-In Pin without seal 1.6, 2.5 mm Receptacle witout seal 1.6, 1.5 mm
RGCON-RED-M4-(0,5-1,0SMM)
Min./max. wire cross section: 0,5-6 mm²Material of the grip handle: Plastic
Max 24V 2-Pole
Max 24V 2-Pole
Max 24V 3-Pole
Max 24V 3-Pole
Locking pipe.
PVC insulatedThe fitter must check the inserted cable(by trying to pull it out if necessary).
PVC insulatedThe fitter must check the inserted cable(by trying to pull it out if necessary).
Art. No. 0558 908 2Cable Con.Ins. Ring Togue Blue M4Art. No. 0558 909 2Cable Con.Ins. Ring Togue Blue M5Art. No. 0558 910 2Cable Con. Ins. Ring Togue Blue M 6
Cable Con. Ins. PigyBack Blue 6.3
Art. No. 0699 100 108 Series 2000 Quick-Action Coupling with Hose Connection 8.0 MM
Art. No. 0699 100 109 Series 2000 Quick-Action Coupling with Hose Connection 9.0 mm
Art. No. 0699 100 113 Series 2000 Quick-Action Coupling with Hose Connection 13.0 MM
Cable Con. Ins. Male Spade Red 6.3 Cable Con. Ins. Male Spade Blue 6.3
តណេភងកលច េៀនCRIMP CABLE LUG, RING CONNECTOR
តណេភងមលញCRIMP CABLE LUG, BUTT CONNECTOR
Art. No. 0558 925 1
តណេភងCRIMP CABLE LUG, PUSH CONNECTORINCLUDING BLADE CONNECTORArt. No. 0558 943 2
Art. No. 0558 926 2
តណេភងមលCable Con. Ins. Female Bullet Red D4
Art. No. 0558 946 1 Art. No. 0558 947 1
តណេភងមលCable Con. Ins. Male Bullet Blue D5Art. No. 0558 948 2
បនះបាមៀមPolishing Pad, Lampwoolblack D135MM
Art. No. 0585 135
បងបPolishing Pad, Orange & BlueSoft D135 x 25 Art. No. 0585 26 130
កលតបVELCRO SUPPORT PLATE
Art. No. 0585 01 125
បនះតប
បនះតប
វចាះទក
តណទាខល
តណទាខល
FOAM SOFT INTERFACE
Art. No. 0586 02 126
FINISHING DISC USEIT ® SUPERPAD SG
Art. No. 0587 403 300
COMPRESSED-AIR CONDITIONINGUNIT SIZE 2
វចាះទកCOMPRESSED AIR MAINTENANCEUNITS
Art. No. 0699 003 12
QUICK-ACTION COUPLING WITHHOSE CONNECTION SERIES 2000
FEMALE THREAD QUICK-ACTIONCOUPLING SERIES 2000
Art. No. 0699 100 212
Art. No. 0585 27 130
Art. No. 0558 949 2
តណេភងសតាលCRIMP CABLE LUG, BLADE CONNECTOR
Art. No. 0558 944 1 Art. No. 0558 945 2
Fastener & Other Parts 30Wuerth Cambodiahttps://eshop.wuerth.de
សមារៈតភាប នង កងៗFastener and other parts
PVC insulatedThe fitter must check the inserted cable(by trying to pull it out if necessary).
PVC insulatedThe fitter must check the inserted cable(by trying to pull it out if necessary).
PVC insulatedThe fitter must check the inserted cable(by trying to pull it out if necessary).
PVC insulatedThe fitter must check the inserted cable(by trying to pull it out if necessary).
PVC insulatedThe fitter must check the inserted cable(by trying to pull it out if necessary).
PVC insulatedThe fitter must check the inserted cable(by trying to pull it out if necessary).
Polishing sponge with Velcro fastenerfor machine polishing and cleaning ofvehicle paints.
Material: LambswoolColour: BlackSupport-disc diameter: 125 mmDiameter: 135 mm
Diameter: 125 mmAdhesive system: Hook and loopMaterial: Polyurethane foamColour: White
Special foam as soft layer between pad and support plateDiameter: 125 mm
The finishing disc for finishing and polish sanding.
Construction size: 2 (1/2 inch)Min./max. working pressure: 0,5-16 barFlow capacity: 4600 l/min
Connection thread: IT G 1/2 inchLength: 60 mmOuter diameter: 23 mmWidth across flats: 25 mmFlow capacity: 2.1 l/min
Art. No. 0699 101 121
Connection: 1/2”Flow Capacity I/min: 2600Control Range in Bar: 0.5-10
Art. No. 0699 101 141
Connection: 1/4”Flow Capacity I/min: 2080Control Range in Bar: 0.5-10
Drain
(247
.0)
2- G 1/4
2- G 3/8
2- G 1/2
M42xP1 .564. 0
(117 .0 )
45.0
92.0
Drain
M42.0xP1.5
117.0
92.0
2-G 1/42-G 3/82-G 1/2
45.0
Art. No. 0699 100 612 Plug-In Nipple with R1/2” male thread made of nickel-plated steel
Art. No. 0699 100 614 Series 2000 Plug-in Nipple with Male Thread 1/4"
Art. No. 0699 100 638 Series 2000 Plug-in Nipple with Male Thread 3/8"
Art. No. 0699 941 116 HOSE-COIL-PN-KIT-S2000-ID11MM-L8M-3PCS, 10bar
Art. No. 0699 941 650 HOSE-COIL-PN-KIT-S2000-ID6,5MM-L4M-3PCS, 10bar
PU Compressed Air Hose 11-16MM, 25M, 16bar
PU Compressed Air Hose Set8-12MM, 10M, 16bar
Quick Coupler ParkerHigh Side 3/8''
Service HoseBlue 3/8" 3M
Service HoseRed 3/8" 3M
Vehicle air conditioning service unitQuick Coupler ParkerLow Side 3/8''
Art. No. 0699 941 812 HOSE-COIL-PN-KIT-S2000-ID8MM-L8M-3PCS, 10bar
Max. working pressure in bar: 20
Inside hose diameter in mm: 9.5Outside hose diameter in mm: 15
Hose length: 15mSupply hose: 90 cm
Connection: R 3/8'' male threadTemparature range: -10ºC to +60ºC Dimension (L × W × H in mm):
367 × 191 × 367
Weight in kg: 7.2
តណទាខល
តណទាខល
តណទាខល
តណទាខល
តណទាខល
តណទាខល
តណទាខល
តណទាខល
តណទាខល
តណទាខល
ទាខល
តណទាសនក
ទាសនក
ទាខល PU
ទាខល PU
HOSE CONNECTION WITH PLUG-IN NIPPLESERIES 2000
PLUG-IN NIPPLE S2000 MT
Art. No. 0699 100 413
ទាខលPNEUMATIC HOSE REEL
Art. No. 0699 010 15
COMFORT CONNECTION WITH PLUG-INNIPPLE SERIES 2000Art. No. 0699 100 811
COMPRESSED-AIR QUICK-ACTIONCOUPLINGArt. No. 0699 129
COMPRESSED-AIR MULTI-PORT-DISTRIBUTOR Y-DISTRIBUTORArt. No. 0699 131 20
Hose Connection, 1/2" MT
Art. No. 0699 356 007
DOUBLE NIPPLE FOR COMPRESSEDAIR WITH CONEArt. No. 0699 356 007
Compressed air hose, 13mm, L10m
Art. No. 0699 901 31
Art. No. 0707 764 019 Art. No. 0707 764 20
Art. No. 0699 942 116 Art. No. 0699 944 811
PU COMPRESSED-AIR HOSE
Quick Coupler Parker
Art. No. 13667 Art. No. 13668
Service Hose
PU COILED COMPRESSED-AIR HOSE SETS
MULTI-PORT DISTRIBUTOR FORCOMPRESSED-AIR DMV 3 STANDARDArt. No. 0699 357 0
COMPRESSED-AIR MULTI-PORT-DISTRIBUTOR
Art. No. 0699 131 23 Art. No. 0699 131 24
Air Nipple 1500 Serieswith Comfort Connection forWürth PU Hoses
Fastener & Other Parts 31Wuerth Cambodiahttps://eshop.wuerth.de
សមារៈតភាប នង កងៗFastener and other parts
Material: SteelLength: 45 mmSurface: ZN 8 silverMax. pressure: 16 bar
Suitable for hose internal diameter:11 mmSuitable for hose external diameter:16 mm
Art. No. 0699 101 811Hose dia. in mm Inside: 11.0, Outside: 16.0L.O.A. : 57.5mm
Art. No. 0699 101 880Hose dia. in mm Inside: 8.0, Outside: 12.0L.O.A. : 48mm
Length: 56 mmWidth across flats: 24 mmMax. pressure: 16 barFlow capacity: 2100 l/min
Suitable for hose internal diameter: 13 mmSuitable for hose external diameter:19 mmFlow capacity: 2100 l/min
Length: 55 mmOuter diameter: 27 mmWidth across flats: 21 mm
With couplings for the installation of a compressed-air systemPneumatic connection: G 1/2 inch IT
Pneumatic connection: R 1/2 inch ETSuitable for hose internal diameter: 11mmSuitable for hose external diameter: 6 mm
Width across flats: 24 mmLength: 51 mmFlow capacity: 3500 l/min
For installing a compressed-air systemT-Piece, 1/2" FT L-Piece, 1/2" FT
Suitable for hose internal diameter: 9 mmMin./max. temperature resistance:-20 to 100 °C
Length: 147 mmWidth: 28 mm
Pneumatic connection: G 1/2 inch ETWidth across flats: 24 mm
Length: 30 mmMaterial: Brass
Connect air tools
អពលរថយន
អពលមខ (កត) អពលមខ (កត)
អពលគរបមខ អពលចត
អពលបតងមខ អពលបតងាយ
អពលកខ
អពលថយ
អពលចះប
អពលចង
អពលងកង
អពលង
អពលង/កនយាយ
អពលសប/ថយាយ
Fastener & Other Parts 32Wuerth Cambodiahttps://eshop.wuerth.de
សមារៈតភាប នង កងៗFastener and other parts
Panel Bulbs Park/Position Bulbs
Side Turn-Signal Bulbs
Interior Bulbs
Brake Bulbs
Brake/Tail Bulbs
Automotive Bulbs 12V
Headlight Bulbs
Front Turn-Signal Bulbs
Brake/Reversing Bulbs
Headlight Bulbs
Back Turn-Signal Bulbs
License Plate Bulbs
Reversing Bulbs
Fog Bulbs
Art. 0720 763 1W21W 12V 21W
Art. 0720 773 51C10W 12V 10W
Art. 0720 763 1W21W 12V 21W
Art. 0720 763 1W21W 12V 21W
Art. 0720 763 2W21/5W 12V 21/5W
Art. 0720 750 1T4W 12V 4W
Art. 0720 750 1T4W 12V 4W
Art. 0720 750 1T4W 12V 4W
Art. 0720 750 1T4W 12V 4W
Art. 0720 765 52612V 2W
Art. 0720 765 53212V 1.2W
Art. 0720 118 027H27 12V 27W
Art. 0720 118 028H27 12V 27W
Art. 0720 710 1H4 12V 60/55W
Art. 0720 710 3HB3 12V 60W
Art. 0720 710 4HB4 12V 55W
Art. 0720 711 1H1 12V 55W
Art. 0720 712 1H3 12V 55W
Art. 0720 714 1H7 12V 55W
Art. 0720 732 1P21W 12V 21W
Art. 0720 738 3PY21W 12V 21W
Art. 0720 762 1W5W 12V 5W
Art. 0720 761 1W3W 12V 3W
Art. 0720 761 1W3W 12V 3W
Art. 0720 762 1W5W 12V 5W
Art. 0720 760 112V 1.2W
Art. 0720 732 1P21W 12V 21W
Art. 0720 734 11P21/4W 12V 21/4W
Art. 0720 734 1P21/5W 12V 21/5W
Art. 0720 762 1W5W 12V 5W
Art. 0720 740 1R5W 12V 5W
Art. 0720 741 1R10W 12V 10W
Art. 0720 734 11P21/4W 12V 21/4W
Art. 0720 732 1P21W 12V 21W
Art. 0720 771 1C5W 12V 5W
Art. 0720 718 011H11 12V 55W
Art. 0720 712 1H3 12V 55W
Art. 0720 714 1H7 12V 55W
Art. 0720 761 1W3W 12V 3W
Art. 0720 762 1W5W 12V 5W
Art. 0720 740 1R5W 12V 5W
Art. 0720 763 11W16W 12V 15W
Art. 0720 763 1W21W 12V 21W
Art. 0720 738 3PY21W 12V 21W
Art. 0720 762 1W5W 12V 5W
Art. 0720 740 1R5W 12V 5W
Art. 0720 732 1P21W 12V 21W
Art. 0720 741 1R10W 12V 10W
Art. 0720 771 1C5W 12V 5W
Art. 0720 763 11W16W 12V 15W
Art. 0720 763 1W21W 12V 21W
Art. 0720 732 1P21W 12V 21W
Art. 0720 763 2W21/5W 12V 21/5W
Art. 0720 734 1P21/5W 12V 21/5W
Art. 0720 734 11P21/4W 12V 21/4W
Art. 0720 763 11W16W 12V 15W
Art. 0720 763 2W21/5W 12V 21/5W
Art. 0720 732 1P21W 12V 21W
Art. 0720 734 1P21/5W 12V 21/5W
ទសបកបញនង េធេតសអពលរថយនCar Bulb Display with tester
ហយសប ATOFLAT BLADE FUSE ATO
Art. No. 0720 950
Art. No. 0731 003 Art. No. 0731 005
ហយសប ATOFLAT BLADE FUSE ATO
Art. No. 0731 010 Art. No. 0731 015
ហយសប ATOFLAT BLADE FUSE ATO
Art. No. 0731 025 Art. No. 0731 030
ហយសប ATOFLAT BLADE FUSE ATO
Art. No. 0731 035 Art. No. 0731 040
ហយសប មនFLAT BLADE FUSE MINI
Art. No. 0731 300 075 Art. No. 0731 300 10
ហយសប មនFLAT BLADE FUSE MINI
Art. No. 0731 300 15 Art. No. 0731 300 20
ហយសប មន នង កសFLAT BLADE FUSE MINI and MAXI
Art. No. 0731 300 25 Art. No. 0731 301 20
ហយសប កសFLAT BLADE FUSE MAXI
Art. No. 0731 301 40 Art. No. 0731 301 60
ហយសប កស
ឈតសបសនកCoolius 2000
FLAT BLADE FUSE MAXI
Art. No. 0731 301 70
ADAPTER FOR TOPPING UPLEAK STOP ADDITIVEArt. No. 0764 000 450
េភងZebra Vehicle Wire 100 M 1.0 MM
េភងZebra Vehicle Wire 100 M 1.5 MM
េភងZebra Vehicle Wire 50 M 2.5 MM
Art. No. 0770 090 1
Art. No. 0770 091 0
Art. No. 0770 107
Art. No. 0770 090 2
Art. No. 0770 091 1
Art. No. 0770 101
Art. No. 0770 108
Art. No. 0770 090 3 Art. No. 0770 10
Art. No. 0770 090 4
Art. No. 0770 109
MAINTENANCE PACKAGE FOR AIRCONDITIONING SERVICE DEVICESArt. No. 0764 000 350
Art. No. 0731 301 80
Fastener & Other Parts 33Wuerth Cambodiahttps://eshop.wuerth.de
សមារៈតភាប នង កងៗFastener and other parts
Height: 688 mmWidth: 630 mmDepth: 100 mm
The vehicle bulb storage systems offerstorage for vehicle bulbs with a clearlayout and make everyday work easier.
Max. nominal voltage:32 V/DCMin./max. operating temperature:-40 to125 °CSurface of the contacts:Tin-platedMin. operating temperature:-40 °CMax. operating temperature:125 °C
Max. current: 7.5 AColour: Ochre brown
Max. current: 15AColour: Turquoise
Max. current: 25AColour: White
Max. current: 40AColour: Orange
Max. current: 70AColour: Brown
Colour: Red
Colour: White
Colour: Blue
Colour: Yellow Colour: Black
Max. nominal voltage:32 V/DCMin./max. operating temperature:-40 to 125 °CSurface of the contacts:Silver-platedMin. operating temperature:-40 °CMax. operating temperature:125 °C
1 x filter + adapter for drainingused oil2 x filter/dryer cartridges1 x service sticker
2 x 250 ml vacuum pump oil,art. no. 0892 764 3004 x rubber seals for service hoses4 x rubber seals for hose connection filter
Max. current: 10 AColour: Red
Max. current: 20AColour: Yellow
Max. current: 20AColour: Yellow
Max. current: 60AColour: Blue
Max. current: 80AColour: White
Max. current: 10AColour: Red
Max. current: 25AColour: White
Max. current: 35AColour: Blue
Max. current: 30AColour: Green
Max. current: 40AColour: Orange
Max. current: 15AColour: Turquoise
Max. current: 3AColour: Violet
Max. current: 5AColour: Brown
ISO 8820-3
For topping up leak stop additive (art. no. 0892764500) via thehigh-pressure side
Wire cross section: 1.0 mm²Outer diameter: 2 mmMin./max. temperature conditions: -40 to 85 °CMin. temperature conditions: -40 °CMax. temperature conditions: 85 °C
Wire cross section: 2.5 mm²Outer diameter: 2.9 mmMin./max. temperature conditions: -40 to 85 °CMin. temperature conditions: -40 °CMax. temperature conditions: 85 °C
Wire cross section: 1.5 mm²Colour: RedOuter diameter: 2.3 mm
Min./max. temperature conditions: -40 to 85 °CMin. temperature conditions: -40 °CMax. temperature conditions: 85 °C
Colour: Blue
Colour: Grey
Colour: Red
Colour: Yellow
Colour: Green
Colour: Green
Art. No. 0771 802 4( Black 2.4/1.2MM )Art. No. 0771 803 2( Black 3.2/1.6MM )Art. No. 0771 804 8( Black 4.8/2.4MM )Art. No. 0771 806 4( Black 6.4/3.2MM )Art. No. 0771 809 5( Black 9.5/4.8MM )
Art. No. 0771 81 27( Black 12.7/6.4MM )Art. No. 0771 819 0( Black 19.0/9.5MM )Art. No. 0771 82 54( Black 25.4/12.7MM )Art. No. 0771 83 81( Black 38.1/19.0MM )
Art. No. 0827 082 016( Round Cells, CR2016 3 V )
Art. No. 0827 082 025( Round Cells, CR2025 3 V )
Art. No. 0827 111AAA/Micro/LR03,1.5V
Art. No. 0827 112AA/Mignon/LR6,1.5V
Art. No. 0827 113LR141.5V Baby
Without internal adhesive
ISO 4762/DIN 912, steel 12.9, bareISO 4762 replaces DIN 912 | There is some similarity | Nominal rangechanged | Fine thread moved to ISO 12474. bar
បាបេភងTHIN-WALLED HEAT-SHRINK HOSE
សមកខរថយន
CHEESE HEAD SCREW WITHHEXAGON SOCKET
Fastener & Other Parts 34Wuerth Cambodiahttps://eshop.wuerth.de
សមារៈតភាប នង កងៗFastener and other parts
Art. No. 082 10 50
UNPRINTED KLAPP-FIX NUMBER PLATEHOLDERArt. No. 0825 6
បឡង
បឡង
CHEESE HEAD SCREW WITH HEXAGON SOCKET
Art. No. 083 141 00
សមកខរថយនNUMBER PLATE HOLDER KLAPP-FIX,PRINTEDArt. No. 0825 60
ារសកខរថយនKLAPP-FIX KEY
Art. No. 0825 990
រកងថពលបBUTTON CELL DISPLAY, UNEQUIPPED
Art. No. 0827 08 100
ថពលបBUTTON CELL ALKALINE MANGANESE 1.5 V
Art. No.0827 08 13
ថពលបLITHIUM 3 V BUTTON CELL
Art. No. 0827 081 620
Art. No. 0827 405
ថពលបLITHIUM 3 V BUTTON CELL
ថពលBATTERY HIGH POWER
បកថពលBATTERY CHARGER PRO 4
Art. No. 082 12 180
ISO 4762/DIN 912, steel 8.8, bareISO 4762 replaces DIN 912 |There is some similarity | Nominal rangechanged | Fine thread moved to ISO 12474.
Version: UnprintedHeight: 131 mmWidth: 530 mmColour: Black
Suitable for number-plate size:520 x 110 mmMaterial: Polypropylene - PP
Version: PrintedPrinted strip height: 11.5 mmMaterial: Polypropylene - PPHeight: 131mm, Width: 530mm
Colours of print: Silver negativeSuitable for number-plate size:520 x 110 mmPrinted strip width: 480 mm
Key for opening Klapp-Fix and Klapp-Fix Plus number plate holdersSuitable for opening SKIN dispenser system, art. no. 08918005
Low self-dischargeCan be used over a large temperature rangeLong storage stability, 3 years
Low self-dischargeCan be used over a large temperature rangeLong storage stability, 10 years
Unbeatable battery power for energy-intensive applicationsVarious applications: High capacity and long service lifePowerful: Highly recommended for devices with a high current requirementCost-saving: Longer operating times and constant energy output at highest levelGood storage stability: Very low self-discharge with shelf life of 5 yearsDecorative:Supplied in practical packaging concept for additional use as counterdisplay, including sales tips on the back
Notice: Cannot be recharged
Includes pre-charged NiMH batteries (4 x AAA and 4 x AA). Enhanced safety for the user: Battery defect detection, Alkaline detection Inverse-polarity protection, Multiple overload protection.. Suitable for use with conventional batteries: Trickle charging.. Clear LC display: Graphic display, Intuitive operation. USB output: Any devices that can be charged via USB are compatible – e.g. PDAs, MP3 players, portable games consoles, navigation devices and mobile phones.. Suitable for use on the go and anywhere in the world: Long-range input 100–240 V/AC Includes 12-V/DC vehicle mains plug
Low self-dischargeCan be used over a large temperature rangeLong storage stability, 10 years
For clean and orderly storage of blister button cells.In robust perforated metal designRed, powder-coated RAL 3020Notice: For max. 8 hanging files (included in scope of delivery)
Art. No. 0848 030 380(Conventional wiper blade -380MM)Art. No. 0848 030 400( Flat Wiper 16" )Art. No. 0848 030 450( Flat Wiper 18" )
Art. No. 0848 030 475( Conventional wiper blade -475MM )Art. No. 0848 030 525( Conventional wiper blade -525MM )
Art. No. 0848 030 700( Flat Wiper 28" )
Art. No. 0848 031 400( Flat Wiper 16'' )Art. No. 0848 031 425( Flat Wiper 17'' )Art. No. 0848 031 450( Flat Wiper 18'' )
Art. No. 0848 031 600( Flat Wiper 24'' )
Art. No. 0848 031 475( Flat Wiper 19'' )
Art. No. 0848 031 500( Flat Wiper 20'' )
Art. No. 0848 031 525( Flat Wiper 21'' )
Art. No. 0848 031 550( Flat Wiper 22'' )
Art. No. 0848 070 350( 350MM-14" )Art. No. 0848 070 400( 400MM-16" )Art. No. 0848 070 425( 425MM-17" )
Art. No. 0848 070 650( 650MM-26" )
Art. No. 0848 070 450( 450MM-18" )
Art. No. 0848 070 700( 700MM-28" )
Art. No. 0848 070 475( 475MM-19" )
Art. No. 0848 070 500( 500MM-20" )
Art. No. 0848 070 525( 525MM-21" )
Art. No. 0848 070 550( 550MM-22" )
Art. No. 0848 270 450( 450MM-18” )
Art. No. 0848 270 500( 500MM-20” )
Art. No. 0848 270 550( 550MM-22” )
Art. No. 0848 270 600( 600MM-24” )
Art. No. 0848 270 650( 650MM-26" )
Art. No. 0848 270 700( 700MM-28" )
Art. No. 0848 035 450( FLATBLADE-SMART-450MM )Art. No. 0848 035 500( FLATBLADE-SMART-500MM )Art. No. 0848 035 550( FLATBLADE-SMART-550MM )
Art. No. 0848 035 600( FLATBLADE-SMART-600MM )
Art. No. 0848 035 650( FLATBLADE-SMART-650MM )
Art. No. 0848 065 450( Hybrid 450MM-18IN )Art. No. 0848 065 500( Blade Hybrid 500MM-20IN )Art. No. 0848 065 550( Hybrid 550MM-22IN )
Art. No. 0848 065 600( Hybrid 600MM-24IN )
Art. No. 0848 065 650( Hybrid 650MM-26IN )
Art. No. 0830 14 601 (K3/2 60G, Uncoated 107x15x5 mm)
Art. No. 0830 14 603 (30G - 6x5G )
Art. No. 0830 14 604 (K3C/2 60G, Chrome 107x15x5 mm)
Art. No. 0830 14 62 (K8/2 30G, Uncoated 94x15x2.5MM)
Art. No. 0830 14 63 (K13/2 60G, Uncoated 109x18x4MM)
Art. No. 0830 14 632 (K13/2 60G, Chrome 109x18x4MM)
Art. No. 0830 14 730 (Zinc Adhesive Weights for cars)
សតទងនAdhesive Weights for Alloy Wheels
Art. No. 0848 147 50
ផតជតកករថយនFLAT WIPER BLADE
ផតជតកករថយនFLAT WIPER BLADE
ផតជតកករថយនFLAT WIPER BLADE
ផតជតកករថយន HybridHYBRID WIPER BLADE
ផតជតកករថយនCONVENTIONAL WIPER BLADE
ផតជតកករថយនCONVENTIONAL WIPER BLADE
សផតទក
សផតទក
RUBBER EDGE REFILLS
Art. No. 0848 175 0
RUBBER EDGE FLAT REFILLS
Art. No. 0848 181 050 Art. No. 0848 177 50
សផតទក RUBBER EDGE REFILLS
Art. No. 0848 196 30 Art. No. 0848 208 30
TEMPLATE FOR CAR REFILLSRUBBER EDGE
Fastener & Other Parts 35Wuerth Cambodiahttps://eshop.wuerth.de
សមារៈតភាប នង កងៗFastener and other parts
1/24 mm
3/45 mm
52,5 mm
Pre-mounted multiadapter
Rugged metal clipsystem
Improvedaerodynamics
Length: 750 mmProfile thickness: 6.3 mmUltraviolet resistance: YesMaterial: Rubber plastic
Length: 750 mm
Length: 750 mm
Profile thickness: 8.5 mmUltraviolet resistance: YesMaterial: Rubber plasticLength: 1050 mm
Profile thickness: 6.3 mm
Colour: White
Ultraviolet resistance: YesMaterial: Plastic
Profile thickness:8.5 mmColour: Black
Art. No. 0894 910 0( 19MMx10M )
Art. No. 0894 910 4( 4MM x 10M )
Art. No. 0895 501 030( Black D10x16 )Art. No. 0895 501 235( Black 12x19 )
Art. No. 0895 505 530( Black D5,5 x 1 )Art. No. 0895 507 330( Black D7,3 x 1 )
Art. No. 0895 504 030( Black D4,0 x 1 )Art. No. 0895 504 530( Black D4,5 x 1 )
Art. No. 0895 508 030( Black D8x14 )
Art. No. 0879 80 01 ( Metal Valve for Trucks V3 20 5 ) Art. No. 0879 80 02 ( Metal Valve for Trucks V3 20 4 ) Art. No. 0879 80 03 ( Metal Valve for Trucks V3 20 6 ) Art. No. 0879 80 04 ( Metal Valve for Trucks TR575 ) Art. No. 0879 80 05 ( Metal Valve for Trucks V3 12 1 )
លកងសសបរថយនCAR RUBBER VALVE, snap-in,SNAP-IN ECO
Art. No. 0879 412
បណលលSHORT VALVE INSERTArt. No. 0879 44
VALVE EXTENSION CAPS
Art. No. 0879 71
គរបល
គរបល
HOT MELT ADHESIVE 101
Art. No. 0890 100 050
វៀនពណាតកងខស
SOUND-ABSORBING PLATE
Art. No. 0890 100 060
សនះបទររសង
SOUND-ABSORBING LINING
Art. No. 0890 100 065
សនះហមបទររសង
SELF-ADHESIVE FUSIBLE LAYER
Art. No. 0890 100 070
សនះបទបតសង
CAR SPONGE
Art. No. 0899 700 400
បងងរថយន
CAR AND WINDOW CHAMOIS, 70x45CM
Art. No. 0899 700 630
តកៀម
XXL CLEANING GLOVE "FUZZY"
Art. No. 0899 710
ាមសបងសត
DECORATIVE TRIM ADHESIVE TAPEសតមខពរ
REPAIR HOSE LINE, NBR/CRទាងពណ
Metal Valve for Trucks
លកងក សបរថយនដកទនញ
Valve CapsArt. No. 0879 45 Art. No. 0879 46
Art. No. 0879 413 2
Fastener & Other Parts 36Wuerth Cambodiahttps://eshop.wuerth.de
សមារៈតភាប នង កងៗFastener and other parts
Material: BrassComparison number: TR VC – 3Version: With affixed seal
Length:19 mmComparison number: 33.0301Material: Plastic
Elastic hot melt adhesive for dent removal, and for securing componentsand coil wires in the electrical industry.
550 x 250 x 2 -6PCSPrevents vibration noise in the interior caused by vibrating body parts,suchas the wheel arch, cardan tunnel, floor group, doors and other side parts.
1000 x 500 x 11For sound absorption, temperature insulation and visual improvement onengine and luggage compartment hoods, doors, etc.
100 x 50 -4PCSFor repair work, sound insulation and sound deadening on car floor panels
Double-sided adhesive tape that canwithstand high loads, with polyethylenebacking and acrylate adhesive
For cleaning cars and commercial vehiclesCell structure with different pore sizes and shapesExcellent cleaning, Promotes foaming, Actively absorbentNon-scratch: Permanently elastic
Made from real sheepskin.High water absorption capacity: Faster workingCompletely natural product: Gentle on the skin, Environmentally friendly,Lint-free, Long service life
Length: 23 cmWidth: 18 cmFringe length: 2.5 cm
Colour: Light greenMaterial: Chenille microfibre
With medium permeation for non-fuel-carrying applications
For passenger cars
Length: 33 mm Length: 42.5 mm
Resistant to high temperaturesLength: 19 mm
Max. air pressure: 4.5 barMax. speed: 210 km/hSuitable for rim-hole diameter: 11.3 mmSuitable for min. rim thickness: 1.8 mmSuitable for max. rim thickness: 4 mm
Material: Plastic
Art. No. 0962 211 022( Blue 335x209x152 )Art. No. 0962 211 032( Blue 230x150x130 )Art. No. 0962 211 041( Red 161x105x75 )
តជតសតពស
តជតសតពស
BASIC MICROACTIVE CLOTHGREEN-40X40CM
Art. No. 0899 900 050
MICROFIBER CLOTH PROFI BLUE
Art. No. 0899 900 107
តជតសតពសMICROACTIVE CLOTH PROFESSIONAL
Art. No. 0899 900 131
រកងសផតទកWiper Blade Rack
Art. No. 0962 848 5
ឈតORSY ® HEXAGON NUTS,ASSORTMENT OF 100, M3-16
Art. No. 0964 317
ឈតសងExhaust Nut Assortment
Art. No. 0964 365
ឈតORSY ® SELF-LOCKING HEXAGON NUTS,ASSORTMENT OF 100
Art. No. 0964 368
ឈតរងទងងORSY ® 100 ASSORTMENT OF SEALINGRINGS
Art. No. 0964 460
ឈតរងលយមញមORSY ® 100 ASSORTMENT OF SEALINGRINGS
Art. No. 0964 463
ឈតរងកORSY ® WASHERS, ASSORTMENT OF 100M3 - 20Art. No. 0964 407
ឈត ែហរ / ឈត ែហរកង ORSY ® RETAINING RINGS,ASSORTMENT OF 100
Art. No. 0964 438 Art. No. 0964 439
អបកទនញSTORAGE BOX
ទអពលរថយនVEHICLE BULB CABINET
Art. No. 0955 720
Art. No. 0955 720 1
Fastener & Other Parts 37Wuerth Cambodiahttps://eshop.wuerth.de
សមារៈតភាប នង កងៗFastener and other parts
Number of pieces in assortment/set: 1035 PCSMaterial: SteelSurface: GalvanisedScrewing-property class: I8IDIN: 934
Screwing-property class: I8IDIN: 985ROHS-compliant: Yes
Number of pieces in assortment/set: 1425 PCSMaterial: SteelSurface: Galvanised
Number of pieces in assortment/set:1050 PCSMaterial: Spring steelSurface: Bare
Number of pieces in assortment/set: 1140 PCSMaterial: CopperDIN: 7603
Number of pieces in assortment/set: 525 PCSDIN: 7603Material: AluminiumMax. temperature resistance: 300 °C
Number of pieces in assortment/set:600 PCSMaterial: SteelSurface: Galvanised
Contents: 16 sizes according to DINand special types = 200 pcs.
For treating vehicles, cleaning surfaces, WC cleaning and in the sanitary sector (baths, washbasins).The "professional" microactive cloth is ideally suited for maintenance cleaning and treatingvehicles. When dry, the cloth attracts dust and fine deposits like a magnet thanks to itsstatic charge. Coarse and greasy dirt is removed by moistening the cloth before use.
Ideal for treating and caring for vehicles and polishing jobs. When dry,the cloth attracts dust and fine deposits like a magnet thanks to its staticcharge. Coarse and greasy dirt is removed by moistening the clothbefore use.
Size: 36 × 32 cmMaterial: Polyester 80%, Polyamide 20%, Warp knittedColour: Light blue (Pantone 284C)Packing: in bulk, 250 pcs/carton, 63 × 43 × 32 cm
Width: 225 mmDepth: 250 mmHeight: 55 mmNumber of drawers: 18 PCSColour: Red
Suitable for wiper blade displayEasy wall mountingAttractive colorDimension: 700 × 270 × 150 mm (W × H × D)
For storing small parts, consumables and bulkmaterials in a way that makes them easy to locateResistant to common greases and oilsImpact-resistant and break-proofTemperature-resistant from –20°C to +90°C
ឈតអរង INCH
ឈតអរង INCH
ឈតកសក
ឈតអរង METRICORSY ® O-RINGS, METRIC,ASSORTMENT OF 100
Art. No. 0964 468 1 Art. No. 0964 468 2
ORSY ® O-RINGS, INCH,ASSORTMENT OF 100
Art. No. 0964 468
ឈតអរងORSY ® O-RING ASSEMBLY KIT,ASSORTMENT OF 100, 5 x 1 m
Art. No. 0964 468 3
ORSY ® O-RINGS, INCH,ASSORTMENT OF 100
Art. No. 0964 468 5 Art. No. 0964 468 6
ឈត E-ClipsORSY ® LOCK WASHERS,ASSORTMENT OF 100, 2.3-19.0 MM
Art. No. 0964 490
ឈតរតCable Ties, black
Art. No. 0964 502 1
ឈតរសរORSY ® COMPRESSION SPRINGS,ASSORTMENT OF 100
Art. No. 0964 506 2
ឈតតណេភង
ឈតតណេភង
WATERPROOF PLUG CONNECTIONHOUSING ASSORTMENT
Art. No. 0964 555 10
ឈតអរងសនក
O-RING ASSORTMENTUNIVERSAL, 165 pcs
A/C O-RING ASSORTMENT
A/C- Mercedes-Benz, 264 pieces A/C - BMW/Porsche, 400 piecesArt. No. 0964 764 004
A/C - Japanese vehicles, 315 piecesArt. No. 0964 764 041 Art. No. 0964 764 031 Art. No. 0964 764 033
CABLE GROMMETS ASSORTMENT
Art. No. 0964 561 6
Assortment BlankingGrommet
Art. No. 0964 561 1 Art. No. 0964 561 11
Ass. Insulated Wire-End-Ferrules + 1 Crimping
Ass. Cable Connector Insulated with Pliers
Art. No. 0964 557 0525 Pcs
Art. No. 0964 558 751530 Pcs
ORSY ® CLAMPING PINS (SLEEVES),ASSORTMENT OF 100, D2-6 MM
Art. No. 0964 475
Fastener & Other Parts 38Wuerth Cambodiahttps://eshop.wuerth.de
សមារៈតភាប នង កងៗFastener and other parts
Material: Perbunan
Number of pieces in assortment/set: 8 PCS
Number of pieces in assortment/set: 440 PCS
Number of pieces in assortment/set: 555 PCSMaterial: EPDM (ethylene propylene diene monomer rubber)ISO: 3302
Number of pieces in assortment/set: 1100 PCSMaterial: SteelSurface: Bare
Number of pieces in assortment/set: 985 PCSMaterial: SteelSurface: BareDIN: 6799
Number of pieces in assortment/set: 250 PCS2.5 x 100 50, 121 3.6 x 140 50, 141 4.8 x 178 100151 4.8 x 280 25, 161 4.8 x 360 25
Number of pieces in assortment/set: 335 PCSMaterial: Spring steelSurface: Galvanised
Material: Perbunan
3,0x2,0 - 24,0 x 3,01050 Pcs
2,80x1.78-23,40x3.531050 Pcs
25,0x3,0 - 42,0x3225 Pcs
25,00x3,53-43,82x5,34330 Pcs
200 Pcs450 Pcs
Number of pieces in assortment/set: 440 PCSMaterial: Perbunan
Art. No. 0986 40( Conical Lubricating Nipple-M6x1 )Art. No. 0986 41( Straight, H1 DIN71412A M8 x 1 )
Art. No. 0986 44(Straight, H1 DIN71412A R 1/4" )
Art. No. 0986 51( 45º, H2 DIN 71412B M8 x 1 )
Art. No. 0986 42( Straight, H1 DIN71412A M10 x 1 )
Art. No. 0986 43(Straight, H1 DIN71412A R 1/8" )
Art. No. 0986 52( 45º, H2 DIN 71412B M10 x 1 )
Art. No. 0992 00 15( 15MM x 50M )Art. No. 0992 00 19( 19MM x 50M )
Art. No. 0992 409 055( 55cm x 33m )Art. No. 0992 409 110( 110cm x 33m )
Art. No. 0992 00 30( 30MM x 50M )
Art. No. 0986 53( Grease nipple )
សមារៈតភាប នង កងៗFastener and other parts
Number of pieces in assortment/set: 130 PCS2.4/1.2-25.4/12.7
Number of pieces in assortment/set: 600 PCSMaterial: SteelSurface: Galvanised
Welded joints in steel construction,vehicle construction, container andboiler construction and shipbuilding onunalloyed steels such asSt. 33–St. 52, H I – H III boiler plate,17MN4, GS 38–GS 52.
S-Sn97Cu3 in accordance with DIN EN ISO 9453Processing temperature: 270-300°CMelting range: 230–250°C
Slightly crepe paper adhesive tape forgeneral masking tasks.Heat resistant to +80°CThe tape is also suited for paintingtasks that require oven drying.
Very thin and smooth special papertape with high-quality film forchallenging masking tasks for indoorand outdoor applications.
ឈតលនងគរបសនក
ឈតគរបល
ឈតទាង
ឈតកលស
ឈតបណលលសនក
ឈតតរងររកសរ
Valve Cap Assortment
Ass. Heat Shrinking Tube
Valve Core AssortmentArt. No. 0964 764 112
Art. No. 0964 764 112
Grease Nipples Assortment
Art. No. 0964 986
ធកផរ
ទាសបបសផរ
ROD ELECTRODE UNIVERSAL BLUE
Art. No. 0982 325 1(Blue-3.2x350)
OXYACETYLENE HIGH-PRESSURE HOSE
កលសង
កលស
CONICAL NIPPLE, SHAPE A
45° CONICAL NIPPLE, SHAPE B
Art. No. 0984 017 910
PRECISION FOLD MASKER
សណផរFITTING SOLDER NO. 3
សតស
សកបតញ
CREPE MASKING TAPE
Art. No. 0987 132
Art. No. 0982 41( Blue-4.0x350)
Art. No. 0964 764 113
Universal Valve and Cap Assortment
Wuerth Compressor Guards
Art. No. 0964 764 034 Art. No. 0964 764 111
Fastener & Other Parts 39Wuerth Cambodiahttps://eshop.wuerth.de
Fabricated with grommets and union nuts9 x 3.5 + 6 x 5 mmLength: 10 mConnection thread: IT 1/4 inch x IT 3/8 inch (left-hand thread)
Next Chemicalsបប ទកជនយ នង
ចលលពតនលមតៈ https://eshop.wuerth.deេហយយខកដរះផលតផលលអកចងងរកPlease visit https://eshop.wuerth.de and enter article number orproduct name to search
Art. No. 0890 012
REPAIR RESIN CRACK FILLវបះកករថយនវ
Art. No. 0890 085 150
ULTRA 2040
Art. No. 0890 100
CONTACT SPRAYសសកងក
Art. No. 0890 100 0
FREEZER SPRAYសសបនយក
Art. No. 0890 100 056
Adhesive Spray 400 ML សសសត
សសងសតវសត
សសងសតសកងរថយន
Art. No. 0890 108 715 (5L) Art. No. 0890 117 150 (150 ML)
Brake Cleaner
Art. No. 0890 108 7
BRAKE CLEANER
សសញសត ងនង ទ
ទកងសត ងនងទ
Art. No. 0890 102
ALUMINIUM WHEEL RIM CLEANER
Art. No. 0890 104
BATTERY TERMINAL PROTECTORសសញររកលគយ
Art. No. 0890 100 63
ADHESIVE REMOVER
Art. No. 0890 100 1
K+D Adhesive and Sealing Compound,White 310ML
វយត K+D
Art. No. 0890 026 10
Windscreen Bonding,Tropics 310 ML
Art. No. 0890 024 010 Art. No. 0890 024 021
VARIOPRIMER SAFE + EASYវប
វបតកករថយន
សស ULTRA
Chemicals 40Wuerth Cambodiahttps://eshop.wuerth.de
Colour: ColourlessWeight of content: 0.4 gDensity: 1.01 g/cm³
310ml, blackProcessing : 5 °C to 40 °CFor replacement glazing for all vehicle types,land and construction machine sector
Contents: 300 mlColour: Light yellowDensity: 0.743 g/cm³Density conditions: at 20°C
Contents: 200 mlColour: ColourlessDensity: 1.13 g/cm³
Contact adhesive with high immediate adhesive strength and high heatresistanceNotice: Not suitable for bonding soft PVC, PVC films, particle board cuttingedges and polystyrene. After use, turn the can on its head and spray untilthe valve is empty.
For a wide range of bonding and sealing work on surface materials suchas metal,painted surfaces, wood, stone, concrete and plastic(polyester and hard PVC).
Long-term and temperature-resistant protection for battery terminals.Film protects battery terminals, pole terminals and plug connections fromcorrosion, weather and battery acidsPrevents transfer resistances and voltage drops, thereby extending the battery life.
For cleaning and degreasing during maintenance and repair work.
Fast flash-off behaviour and excellent cleaning performance:Fast and effective removal of soot, grease, brake dust and oily residuesResidue-free cleaningAcetone-free:
High degree of material compatibility with paints, plastics, seals and rubberAOX- and silicone-free
Acidic special cleaner for light-alloy wheel rimsContains phosphoric acid: Removes even the most stubborn brake dust deposits,as well as tar splashes and other difficult to remove contaminationEconomical to use: Saves time and money, If used regularly, the originalappearance is restored. The build-up of new soiling is prevented.
CLNR-BONDSEAL-REMOVER-400ML
For removing unhardened PU and hybrid adhesives/sealantsDo not use on porous substrates.
Density conditions: at 20°CSmell/fragrance: CharacteristicShelf life from production: 36 Month
Smell/fragrance: CharacteristicShelf life from production: 24 MonthChemical basis: Mineral oil
Multi-purpose surface pre-treatment agent forall common substrates found in replacement glazing4-in-1 system: Promotes adhesion, ActivatorUV protection, Corrosion protection
Chemical basis: MethacrylateMin. flashing point: 100 °CSmell/fragrance: MildFor star-shaped impact (vis 40pcs)
ទកថាជនយ នង ទាchemicals
Color: Amber liquidDensity: 0.80 g/mlTemperature range: –20°C to + 140°CViscosity of base oil: 22 cst at 40°C
20ml10ml
Art. No. 0890 121
TYRE FOAMសសងសតកងរថយន
Art. No. 0890 199
VALVE GRINDING PASTEទកសសប
Art. No. 0890 23
ENGINE CLEANERសសញសតសន
Art. No. 0892 009 100
Brake Fluid DOT 4 super 1Lង ង DOT4
Art. No. 0892 009 5
Brake Fluid DOT 4 5Lង ង DOT4
ង ង
Art. No. 0892 075 200 Art. No. 0892 075 300
GRAVEL THROW AND UNDERBODYPROTECTION
សសញតរថយន(ងកត)
Art. No. 0892 009 131, DOT 3, 1L, -40˚C to 245˚C, 20000km or 1year
Art. No. 0892 009 143, DOT 4, 5L, -40˚C to 255˚C, 20000km or 1yearBrake Fluid
RTV GASKET SEALANTវបតរង
វបតរង
Art. No. 0890 321 (Red 100G/70 ML)
Art. No. 0890 323 (Black 100G/70 ML)
ENGINE SEALING COMPOUND SILICONESPECIAL 250
Art. No. 0890 26
Art. No. 0890 321 085 Art. No. 0890 324 085
TAR REMOVERសសងសតសថល
Art. No. 0890 25 Art. No. 0890 250 5
ACTIVE GLASS CLEANERសសសតកក
Art. No. 0890 2( 300 ml )
Art. No. 0890 200( 300 ml )
Art. No. 0890 200 150( 150 ml )
ROST-OFF & ROSt-off Plusសសតះ
Art. No. 0890 122 1 Art. No. 0890 124 1
TYRE MOUNTING PASTEងបលបរកង
Chemicals 41Wuerth Cambodiahttps://eshop.wuerth.de
Contents: 500 mlColour: WhitepH value/conditions: 9 / at 20°CAOX-free: Yes, Silicone-free: NoBio-degradable: Yes
For mounting car, truck andmotorcycle tyres
. Contents: 0.3 l
. Container: Aerosol can
. Colour: Colourless
. Bio-degradable: Yes
. AOX-free: Yes
. Cleaning foam for glass and smooth surfacesStable. Extremely high degree of cleaning. Saves money thanks to 20x yield. Protects materials
. Effortlessly removes tar, oil,and splashes of underbodyseal and cavity sealant frompaint and chrome.
Permanently elastic silicone sealing.. Outstanding adhesion.. Excellent oil resistance.. Outstanding resistance to chemicals.. Sensor safe. No acetic acid released.
For Disc, drum brake systemsBalance circumfluence boil point >260˚CWetness boil point >160˚CShelf Life: 1 Years or 20000km
For Disc, drum brake systems
Rubber-based coating compound containingsolvents, can be painted.Excellent adhesion, rapid skin formationScratch-proof. Can be painted overSuitable for oven drying at 40°C to 60°Cfor short periodsExcellent stone chip protection. Professional tip
For hydraulic brake systems. Prescribed for various VW/Audi, Seat and Skoda vehicles.Meets and exceeds the specifications: SAE J 1703, 1704, FMVSS 116, DOT 3 andDOT 4 Brake fluids can be mixed with any other commercial product that satisfies thefollowing test requirements: FMVSS 116, SAE J 1703, 1704 or ISO 4925.
Grey 85gRed 85g
Black, 1000ML Grey, 1000ML
vulcanisation rate approx. 1.5 mm/day. Cold-vulcanising silicone rubber. Bridges larger unevenness. Reliable at sealing, even after withstanding years of vibrations. Excellent adhesion and chemical resistance. Does not run or pull threads
. Permanently elastic silicone sealingcompounds for engine and bodywork, brief temperature resistance of 300°C. Skin formation after just a few minutes,
. Good solvent power
. Removes stubborn dirt
. Emulsifying effect
. Easy to rinse off
. Chemical basis: Mineral oil
. Density/conditions: 0,72g/cm³/at 20°C
. Shelf life from production: 24 Month
. Smell/fragrance: Characteristic
Contents: 120 mlWeight of content: 180 gColour: Grey
Rost-Off PlusContainer:Aerosol canContainer:
Spray box
Min. temperature conditions: -10 °CMax. temperature conditions: 140 °CKinematic oil basis viscosity: 16.5 mm²/sConditions for viscosity of oil basis: at 40°CFlashing point of active ingredient: 200 °CSilicone-free: Yes, Acid-free: YesAOX-free: Yes, Resin-free: Yes
Smell/fragrance: Faint odourDensity: 1.5 g/cm³AOX-free: Yes
White -5 Kg Black -5 Kg
Product weight (per item): 500 gChemical basis: Alkaline surfactants, silicone oilSmell/fragrance: CharacteristicDensity/conditions: 0,919 g/cm³ / at 20°CShelf life from production: 12 Month
ទកថាជនយ នង ទាchemicals
Surfaces must be cleaned.
Apply 2-4 mm bead to one surface.
500 ml 5 l
Art. No. 0892 318 81Silicone Acetate (Clear) 280ML Art. No. 0892 318 82Silicone Acetate (Black) 280ML
Art. No. 0892 318 83Silicone Acetate (White) 280ML
Art. No. 0892 354 0Radiator Coolant (-35°C)Green 4L
Art. No. 0892 354 1Radiator Coolant (-35°C) Red 4L
Art. No. 0892 680 001Radiator Coolant (-68°C) Red 1L
Art. No. 0892 681 001Radiator Coolant (-68°C) Green 1L
Art. No. 0892 538 82Silicone Neutral Black 300ML
Art. No. 0892 538 83Silicone Neutral White 300ML
Art. No. 0892 143
Art. No. 0892 200
1-K PUR Mounting Foam 500MLហមរកឌ
ទកសងស
ACETATE SILICONE ANTI FUNGUS
វសលកនញបនបទកររផត
ANTI-CORROSION VARNISH ZINC 300
Art. No. 0892 538 73
NEUTRAL SILICONE MULTI PURPOSE White 300ML
វសលកនធននងសត
NEUTRAL SILICONE WEATHER SEALANTវសលកនធននងសត
Radiator Coolant, 4 Lទក COOLANT
ទក COOLANTRadiator Coolant, 1L
Art. No. 0892 333
WINDSCREEN CLEANER FLASH CLEANERIN DISPLAY CARTON
ទកជនយងកករថយន
Art. No. 0892 764 004
REFRIGERANT R134Aសសនក
Art. No. 0892 764 026
PAG Oil 250 MLងកសរ PAG
Art. No. 0892 764 035
Art. No. 0892 764 036Multigrade Compressor Oil 1Lងកសរ
Art. No. 0892 764 300
Vacuum Pump OILងមទរបម
Art. No. 0892 764 035
Leak Detection Additive Dye 250ML
ទកជនយពនតចសសនក
Art. No. 0892 764 775
A/C Leak Stop Plus 60ML
ទកជនយបតចកងពនសនក
Chemicals 42Wuerth Cambodiahttps://eshop.wuerth.de
High-quality and secure insulating and filling of cavities, such as pipe ducts,joints, wall joints and wall openings. Adheres to substrates such as concrete,marble, stone, uPVC, metal and wood with the exception of PE, silicone,PTFE, grease and similar surfaces.Ice blue foam colour provides visual confirmation of installation.
Temperature resistant –40°C to + 100°C.Working temperature +5°C to +40°C.Touch-dry in approx. 25 min. Cures fullyat about 2 mm/24 h (23°C). Max.long term absorption of movement 20%.
Temperature resistant–40°C to + 150°C. Working temperature +5°C to +40°C.Touch-dry in approx.12min, fully cured at about 3.8 mm/24 h (at +23°C).
Temperature resistant–40°C to + 100°C. Working temper-ature +5°C to +40°C.Touch-dry in approx. 15 min, fullycured at about 2 mm/24 h (at +23°C).
Cooling engineHigh boiling point: (108˚C or more)Low freezing point:(–35˚C or lower)Antirust, Antiscale, Antifoam
Cooling engineHigh boiling point: (118˚C or more)Low freezing point:(–68˚C or lower)Antirust, Antiscale, Antifoam
Small container for easy dosing depending on tank size.Highly-concentrated windscreen cleaner 1:100Contains special cleaning substancesVery good material compatibility
13.6 kgRefrigerant R134a: 1,1,1,2-Tetrafluorethane.Refrigerant for use in automotive air conditioning systems.
For maintaining the vacuum pump in air-conditioning service unitsVery good material compatibilityRubber and plastic seals are not attacked
PAG polyalkylene glycol air-conditioning compressor oil for vehicleair-conditioning systems using R134a refrigerantGood mixing properties. Optimum lubrication effectHigh degree of wear protection. Very hydrophobicEnsures thermal stability
Compatible with following refrigerants: R 23,R 125, R 134a, R 227, R 413a, R 407c,R 410a, R 404a, R 507, R 744.Can be mixed with PAG oil and ester oil. One oil for all applications
High-value synthetic oil with additivespecifically tailored for use in air-conditioning compressor technology
Provides permanent protection against corrosionExcellent corrosion protectionTemperature-resistant up to approx. 300°C
Quick-dryingDust-dry after approx. 15 minutesTouch-dry after approx. 45 minutesCompletely dried after approx. 2–3 days
ទកថាជនយ នង ទាchemicals
Wuerth Cambodiahttps://eshop.wuerth.de
Art. No. 0893 010 0
VEHICLE CLEANER AUTOSHAMTWO1000ML
បងរថយន
ទកបរាង
Art. No. 0893 011 05
PAINT SEALANT PINk, 5 LTR
Art. No. 0893 011 5 Art. No. 0893 011 500
Polishing Spray
5 L 500 ML
សសប
Art. No. 0893 012 414
WINDOW SEAL
Art. No. 0893 012 6
GLOSS SEAL
Art. No. 0893 013 05
ENGINE CLEANER ENGINE WASHទកងសតសន
Art. No. 0893 025 2
ACTIVE FOAM WASHហមងរថយន
Art. No. 0893 033 (500 ML)
Art. No. 0893 033 150 (150 ML)INTERIOR CLEANERសសសតទ
ងសបឧបករណខល
Art. No. 0893 050 5
Special Oil for pneumatic tools (1L)
Art. No. 0893 055 451
Power 5 spray 200ml (5 in 1)
Art. No. 0893 080 3
Super glue Power 2វវទ
Art. No. 0893 09
Superglue Super Fast, KLEBFIX 20 Gវបតពស
Chemicals 43
Two-in-one vehicle cleaner: washing and waxing in a single stepHigh cleaning performanceRemoves dirt of all kinds from vehicle paintwork, chrome, plastics,rubber etc.
Synthetic paint sealant with nano wax particles and UV protectionSynthetic nano wax particles:Smooths the finest structures in the paint. Glassy surface and brilliant deep shineProvides lasting protection against weather, car wash scratches and otherenvironmental influences. UV-resistant
Provides new and used cars with a highgloss in just minutesMinimal time requiredVehicle looks like it has just been polishedSilicone-free
Contents: 20 mlContainer: Pump spray boxShelf life from production:18 Month
Contents: 250 mlColour: BeigeChemical basis: Mineral oilDensity: 0.99 g/cm³
Contents: 5 lContainer: CanisterSmell/fragrance: FreshColour: BluepH value: 8.5
Contents: 25 lContainer: CanisterColour: Yellow, pH value: 7AOX-free: Yes, Silicone-free: YesPhosphate-free: Yes
Container: Aerosol canSmell/fragrance: PeachColour: Transparent. pH value: 9.5
For pneumatic toolsExcellent protection against corrosion and wearActive and effective even at low temperaturesResin and acid-free, Silicone-free
Loosens rusty objects such as bolts, screws, nuts, etc.Lubricates and stops squeaking and abrasive noises.Cleans and protects plastic and metal parts.Prevents corrosion on metals and icing up of lock cylinders.Protects and suppresses moisture in electronic areas.
12 Pcs, 3G
Colour: ColourlessDensity: 1.06 g/cm³Viscosity: 30 mPasStretch capacity: 2 %Solvent-free: YesWeight of content: 20 g
Chemical basis: Cyanoacrylate acidic esterMin./max. temperature conditions: -30 to 80 °CMin./max. processing temperature: 5 to 35 °CMin. processing temperature: 5 °CShelf life from production: 12 Month
Chemical basis: EthanolDensity/conditions: 0,9 g/cm³/at 20°CMin. flashing point: -60 °CShelf life from production: 24 MonthBio-degradable: YesAOX-free: Yes, Silicone-free: Yes
Product weight (per item): 26800 gChemical basis: Anionic tensideSmell/fragrance: CharacteristicDensity/conditions: 1,015 g/cm³/at 20°CShelf life from production: 24 Month
Chemical basis: Water and alkaline tensideShelf life from production: 24 MonthBio-degradable: Yes, AOX-free: YesSilicone-free: Yes, Solvent-free: YesPhosphate-free: Yes, Complex-free: Yes
Smell/fragrance: CharacteristicShelf life from production: 36 MonthAOX-free: Yes, Silicone-free: Yes
Min./max. processing temperature /conditions:10 to 40 °C / at 60% relative humidity
ទកថាជនយ នង ទាchemicals
Wuerth Cambodiahttps://eshop.wuerth.de
Art. No. 0893 100 0
Sealant Gasket Reomover 300 MLសសងសតរង
Art. No. 0893 106 (500 ML)
Art. No. 0893 106 1 (150 ML)HHS 2000 Lubricantសសញា
សសញាសត
Art. No. 0893 106 6
HHS Dry Lube 400 ML
Art. No. 0893 107 003
Multi-purpose Grease IVWhite Color 400 G
ញាកងចណរ
សសញាកងចណរ
Art. No. 0893 107 1
Lubricating Oil for food use 300 ML
Art. No. 0893 110
Rust Converter 1Lបងះ
Art. No. 0893 117 005
SANITARY CLEANER EASY-TO-CLEAN1000ML
ទកងសតបនបទកនងបងន
Art. No. 0893 117 105
SURFACE CLEANER EASY-TO-CLEAN1000ML
ទកងសតទ
Art. No. 0893 118 2
BMF Cleaner 5 Litersទកងសត BMF
Art. No. 0893 121 1
Metal Restorer (Polishing) 400 Gបកបទ
Art. No. 0893 121 2 Art. No. 0893 121 205
Powefull Stainless SteelCleaner
ទកងសតកអណក
Art. No. 0893 124
Workshop Cleaner Absobon 5 Lទកងសតាងង
Chemicals 44
Removes sealing materials, adhesives, paints, etc. in just minutesFirm consistencyNo dripping off vertical surfaces
High pressure resistance: Extraordinarilytear-proof lubricating film withexcellent noise and vibration dampeningGood creep propertiee: Excellentlubricating properties for small gapsReliable protection against corrosion
Partly synthetic oil that isextremely resistant to highpressures
Shear-proof dry synthetic wax with PTFEDry synthetic waxLubricant with good centrifuge-resistance on fast-turning and rotating partsLow dirt adhesionOutstanding corrosion protection
Synthetic high-performancegrease with white solid lubricantsSafety productVery easy to use and safe to handleImproves health and safety in the workplaceNo special labelling required
Safe to use with foodEP additives for high pressure resistanceExcellent dry-running propertiesGood sealing effect and corrosion protectionExcellent resistance to dust, dirt and waterResin-free, acid-free and silicone-free
Colourless special lubricant with creeping properties for the food industryas well as for the beverage, pharmaceutical and clinical industriesLow-viscosity and colourless special lubricant with penetration properties
Contents: 1000 mlColour: CreamShelf life from production: 60 MonthMax. temperature resistance: 120 °C
Sanitary Cleaner1L, Red, Perfumed, pH 1AOX-free, Bio-degradableSilicone-free, 1 box 12
Surface Cleaner1L, Blue, Lemon smell, pH 7AOX-free, Bio-degradableSilicone-free, 1 box 12
For removing even the most stubborn dirt from metal. NSF-certified.Contains activated citric acidStubborn dirt such as metal oxidation, surface rust, verdigris, lime andboiler scale is reliably removed and it is gentle on materials.
Powerful, environmentally friendly cleaner in the neutral pH range withextremely high dirt removal power for floors, machinery and plants.Dirt is penetratedOily/greasy dirt is not emulsified, but is penetrated and separated.
5 L500 ML
Special cleaning fluid for pre-cleaning metalsurfaces. NSF-certified.Powerful removal of oil and greaseTested for use in food-contact areasContains no phosphates, organic solvents orcaustic substances. Gentle on materials.
Environmentally friendly cleaning agent for workshops, machinery and vehicles.. No phosphates, solvents and corrosive substances . Extremely biodegradable. Can be used mechanically, manually or in high-pressure units. Powerful at dissolving grease but is still mild and gentle on materials. Does not attack paints, rubber or plastics. Fast-separating in waste water in accordance with German Ecological Standard Test B 5105
Rest roomsRemoving lime deposits, soap residues, urine scale and greasy stains from acid-resistant materials
Floor Tables/chairs Mirror/glass
ទកថាជនយ នង ទាchemicals
Wuerth Cambodiahttps://eshop.wuerth.de
Art. No. 0893 139 1
EvapoFresh 100 ML ទកសមបតកន
Art. No. 0893 139 20
Art. No. 0893 140
Deodoriser 500 MLសសបតកន
ប P20 នង P10
ប P5 នង P30
Art. No. 0893 221 (500 ML)
Art. No. 0893 221 150 (150 ML)Silicone Sprayសសសលកន
សសញាកងចណរ
Art. No. 0893 230
V-Belt Spray 400 MLសសររន
Art. No. 0893 240
Rost Off Ice 400 MLសសតសទកកក
Art. No. 0893 243 050
Screw Sealant Medium Strength 50 Gវបតបឡងកងមធម
វបតបឡងកងខស
Art. No. 0893 270 050
Screw Sealant High Strength 50 G
ទកសបបសក
Art. No. 0893 280 1PLASTIC PAINT PLAST PT ®
ទកសបាយវល
Art. No. 0893 3
Sealant Smoothing Agent 5 L
Art. No. 0893 221 000
Silicone Fluid
Art. No. 0893 150 010Art. No. 0893 150 020
Polish Combi Plus P55-1kg &Polish Antiholo Gramm Plus P30-1kg
Art. No. 0893 150 030Art. No. 0893 150 055
Polish high gloss plus p20-kg &Polish Fast Cut Plus P10-1kg
Industry Cleaner(Sticker and residue remover) 500 ML
សសសតសកខរ នងជរ
Chemicals 45
Fast-acting odour absorber for use in the EVAPO® mat system.Reliable odour eliminationThe aerosol is ideal for reaching hard-to-reach areasDoes not leave any traces behind on windows or interior100 ml is sufficient for one applicationDiffuses a pleasant, fresh citrus scent
Neutralises unpleasant odours in textilesSuitable for virtually all textilesSpecially selected combination of raw materialsFine-mist manual spray bottleAOX-free
High-quality special cleaner for removing adhesive tape residue, labels andfilm stickers as well as stubborn dirt. NSF-certified.EffectiveGentle on materialsUser-friendly. Acetone-, silicone- and AOX-free
Highly abrasive high-gloss polish forquickly removing surface defects infresh repairs and fully hardened topcoats
Medium-abrasivehigh-gloss polish for
efficient paintpreparation
Sealing paintsHigh-gloss finish for permanently removingstreaks and holograms on dark vehicle paints
Container: Spray canColour: Colourless
Contents: 0.4 lColour: ColourlessShelf life from production:24 Month
For extending the service life of V-beltsPrevents slipping, transfers full drive output, eliminates squeakingEliminates readjustment work in case of minor belt slippage due to cold,moisture or due to normal elongationAOX-free
Base: PetroleumColour: Pale yellow, transparentDensity at 20°C (active substance): 0.73 g /cm3Operating temperature range: –10°C to +40°CBase oil viscosity at 40°C: < 5 mpa/s
Removable screw retainer and sealing compound – one-handeddispensing systemFor medium-strength bondingRemovable with regular tools
Contents: 75 mlColour: BlackpH value: 8.0-9.0
Universal smoothing agent. Suitable for all types of sealants.Easy to apply from the aerosol canUniform cross-linkingImproved surface
Product weight (per item): 136 gShelf life from production: 90 Month
Tough removable screw retainer and sealing compound –single-handed dispensing systemIdeally suited for screw connections exposed to high stresses100% sealing – no additional fixings necessaryProtects against corrosion due to friction, and against rust
Chemical basis:Physiologically harmless synthetic oilDensity/conditions:0,785 g/cm³ / Active substance, 20°CMin./max. temperature conditions:-50 to 250 °C
Chemical basis: Mineral oilShelf life from production: 24 Month
ទកថាជនយ នង ទាchemicals
Wuerth Cambodiahttps://eshop.wuerth.de
Art. No. 0893 300 250
INJECTOR SOLVENT INJECTOR-EX សសញសបាះបច
Art. No. 0893 40
Art. No. 0893 449
Special Adhesive 1G វបតកកពស
Liquid Metal FE 1 500 Gវក FE 1
Art. No. 0893 470
Insect Remover 500 ML សសញសឣាតសតលត
សសងសតសកងរថយន
Art. No. 0893 476 500
Wheel Rim Cleaner Premium 500ML
Art. No. 0893 518 050
Flange Sealer Red 50 Gវបតសងសន
Art. No. 0893 545 050
Hydraulic Sealant 50gវបតទាង
Art. No. 0893 60
Contact OL, Oxidation Solvent 200 MLសសតសម
Art. No. 0893 603 025
Bearing Sealer 25 Gវបតង
ទកសបាគកងពនសនក
Art. No. 0893 764 05
Disinfectant Surface Cleaner 5L
Art. No. 0893 65
Contact SW 200 ML
សសសឣាតពនងពស
Art. No. 0893 580
Finishing disc Useit ®Superpad SG 38ML
Chemicals 46
Mineral oil free injector and spark plug solvent with KENA®microfluid formula.
Contents: 250 mlContainer: Spray box
For easy adhering of glass and metal to and with each other.Impact and vibration-resistant adhesionPermanent adhesion between glass and metalExcellent chemical resistanceHighly resistant to dilute acids and bases, water, and alcohol
Fast-acting repair system, ideal for installers and workshops in the metalprocessing sector.
For easy removal of insect dirt/residue that damages paintwork.Easy and quick to applyAlso highly suitable for pre-treatment at the car washGentle on materialsDoes not attack paintwork, chrome, plastic, rubber etc
Acid-free special cleaner for all steel and light-alloy wheel rims.Colour change indicates that product is workingEasy-to-clean finishReduced adhesion of brake dust by the formation of a protective filmon the wheel rim.
For sealing flanges and surfaces with a large gap. Viscous product.Viscous product. 100% sealingSlight flexibility up to 120 °C. Seals immediately under low pressureAlso suitable for passive metals. Rapid curing.Resistant to a large number of bases, gases, solvents, oils and fuels
For sealing pneumatic and hydraulic screw connections subject to high loads.With screw connections, up to the burst pressure of the pipe/hoseExcellent resistance to all hydraulic fluids and fuelsQuick to harden, even at low temperatures. 100% sealing.Resistant to a large number of bases, gases, solvents, oils and fuels
For bonding metal, composite materials and various plastics to themselvesand each other. Broad adhesive range.Primers are not required for many metal surfaces. High strength.Excellent resistance to media.High temperature resistance up to 120°C
Spray oxidation solvent. Cleans all types of contactsRemoves oxide and sulphide coatings, resin, oil and dirtEliminates "bangs" as well as impermissible high voltage resistancesDoes not attack most construction materialsVersatile range of applications. Halogen-free
For high-strength connection of cylindrical parts subject to high loadsReliable hardening at low temperatures around 0°C.Maximum gap-filling power of 0.15 mmPrevents frictional corrosionResistant to a large number of bases, gases, solvents, oils and fuels
Kills bacteria, viruses and fungiDisinfects, cleans, protectsReliable at fighting microbes, bacteria, viruses and fungi.No stainingSilicone-free
Special spray washCleaner for contacts and electrical components.Removes wood resin residues. Cleans heavily soiled componentsDoes not attack plastics and standard materials.Versatile range of applications (elec. parts and elements, PCBs, relays,connector strips)
ទកថាជនយ នង ទាchemicals
Wuerth Cambodiahttps://eshop.wuerth.de
Art. No. 0893 764 1
EvapoClean 100 ML
សសបតករ នងាគកងពនសនក
ទកបតកនកងរថយន នងពនសនក
Art. No. 0893 764 65
Quickfresh Silver 100 ML
Art. No. 0893 800 1
CU800 Copper Paste 100 Gញបតន
Art. No. 0893 870 1
Multi Purpose Grease IYellow Color 400 G
ញាពណឿង
Art. No. 0893 880 4
HP Grease 25 KG ញា HP
Art. No. 0893 900 0
Hand Cleaner 4000 ML ទកងសឣាត
Art. No. 0897 105 307 Art. No. 0897 105 301
Engine Oil 5W-30Synthetic Technology
5W-30, 4 L
5W-30, 1 L
10W-40, 1 L
10W-40, 5 L
15W-40, 1 L
15W-40, 5 L
ងសន 5W30
Art. No. 0897 110 402 Art. No. 0897 110 401
Engine Oil Ultra 10W-40ងសន 10W40
Art. No. 0897 115 402 Art. No. 0897 115 401
Engine Oil Triath Universal 15W-40ងសន 15W40
Art. No. 0893 871 1
Multi Purpose Grease IIGrey-Black Colo 400 G
ញាពណះ
Chemicals 47
Hygienic vehicle air-conditioning unit cleaning agent dispensed by anultrasonic misting device (EVAPOmat®).Effectively eliminates and prevents offensive odours and allergic reactionscaused by bacteria and fungi from occurring.
For effective elimination of odors in interior spaces and vehicleair-conditionersUser-friendly. Universal, fl exible and mobileEnhanced value creation. With long-lasting fresh scentAOX- and silicone-free. Water-based
Highly adhesive lubricating, separating and anti-corrosive copper pastethat is extremely resistant to high temperatures and high pressuresVery high resistance:Temperature application range from -20°C to +1200°C for dry lubricationResistant to water, diluted alkali solutions and diluted acids
Lithium-soap, mineral-oil-based universal lubricating greaseStable under heavy loads and resistant to oxidationForms an excellent seal to repel dust and dirtGood adhesive propertiesIn practical "pull-off" cartridgeSilicone-free, acid-free, resin-free and AOX-free
Lithium-soap graphite grease resistant to high pressures with EP additives.EP additives for high pressure resistanceGraphite for excellent dry-running propertiesGood sealing effect and corrosion protectionExcellent resistance to dust, dirt and waterComes in practical "pull-off" cartridge
Lithium complex, partly synthetic oil-based lubricating greaseConforms to the Volvo Standard 1277.2 and NLGI Standard GC-LB specificationsBroad range of applicationssimple stock keeping and optimum application reliability.Extremely high pressure absorption capacity. Good corrosion protectionWater-repellent. Silicone-free, acid-free and resin-free
Hand cleaner for medium to heavy soiling with natural exfoliating particles.For dispenser system art. no. 0891901.Gentle on the skin: Cleans and protectsHigh proportion of substances with prophylactic effect prevent skin irritationpH-neutral and soap-free. Dermatologically testedPrevents drains from becoming clogged. Alkali-free and silicone-free
Smooth-running engine oil for top-perfor-mance passenger carsFast oil supply at low temperatures,reliable cold startOil change intervals from 30,000 to50,000 km are possible depending on themanufacturer's specifications. HC synthetic oil
Smooth-running engine oil with syntheticcomponents for passenger carsFuel-saving, smooth-running oil with excellentcold-starting behaviourOutstanding protection against wearand corrosion. Mineral
High-performance, multigrade engine oil for optimum lubrication and a longengine service lifeGood wear protection properties andprevention of black sludge formationLow oil consumption and very resistantto ageing, viscosity and temperaturesMineral oil
ទកថាជនយ នង ទាchemicals
5W-40, 1 L
5W-40, 5 L
5W-30, 1 L
5W-30, 1 L
5W-30, 5 L
5W-30, 5 L
Wuerth Cambodiahttps://eshop.wuerth.de
Art. No. 0897 115 416Engine Oil 15W-40 Mineral Based 208 L
Art. No. 0897 402 001
Art. No. 0897 668 003
Art. No. 0897 404 001
ATF (auto Transmission fluid)ងអបខអត
Art. No. 0897 705 402 Art. No. 0897 705 401
Triathlon Performance SAE
Engine Oil , 208 Lងសន (ហយ)
Triathlon Hydraulic Oil HLP 68 20Lងបម 68
ងសន 5W40
Art. No. 0897 905 312 Art. No. 0897 905 311
TRIATHLON ® ENGINE OIL PREMIUMP 5W-30
ងសន PREMIUM P 5W-30
Art. No. 0897 905 322 Art. No. 0897 905 321
TRIATHLON ® ENGINE OIL PREMIUMM 5W-30
ងសន PREMIUM M 5W-30
Art. No. 0899 511 905 Art. No. 0899 511 906
Eye Wash Wall Station 35x80x57 ML& Eye wash 500 ML
ទកងក នងងទរ
ងសន មតEngine Oil Stroke
TRIATHLON ® GEARBOX OILAUTOMATIC SUPER & ULTRA
ងអបខ
Chemicals 48
High-performance, multigrade engineoil specifically tailored to requirementsof classic vehiclesSelect active agent combinations ofadditives in conjunction with mineralbase oils represent a high-performanceoil for classic diesel and petrol engines
For Steering gears, manual andautomatic gearboxes and for hydraulicsystems and auxiliary drives
Recommended for use in all applications thatcall for DEXRONO -II, DEXRONO-III, MERCONO, MERCONO V, andallison C-4 fluids. In addition, It is suitable for service fill of many transmissionsmanufactures by Asian, North American andEuropean OEMs as well as in ContinuouslyVariable Transmissions.
High-performance hydraulic oil compatible with all commercially availablesealing compounds as well as steel, non-ferrous metals and light metals.TRIATHLON hydraulic oils are produced and packaged in compliance withthe most stringent quality specifications in accordance withDIN EN ISO 9001: High level of product safetyComprehensive manufacturer approvals
4000km to 5000km or6 months
Bottle with sterile saline solution (0.9%)In accordance with DIN EN 15154-4
Modern smooth-running year-round engineoil for passenger cars, excellent protectionagainst wearReduces consumption of oil and fuel and ensuresrapid oil supply to the engineDepending on the manufacturer's specifications,oil change intervals of up to 30,000 km are possible
State-of-the-art low-ash, smooth-runningengine oil for passenger carsSpecifically formulated for ensuring maximumservice of the diesel particulate filterProvides excellent protection against wear,saves fuel and reduces emissionsOil change intervals of up to 40,000 km are possibledepending on the manufacturer's specifications
State-of-the-art, low-ash, smooth-runningengine oil for passenger carsEnsures rapid oil supply to the engine andexcellent protection against wearGuarantees maximum service life of dieselparticulate filters and ensures optimum engineperformance. HC synthetic oil
Art. No. 0897 120 505Triathlon Universal HCDP SAE 20W-50 208 L
Art. No. 0897 610 405Engine Oil 10W-40 Synthetic Technology 208 L
Art. No. 0897 905 335Low ash passenger car engine oils,Premium P 5W-30, HC Syunthetic 208 L
Art. No. 0897 705 405Engine Oil-Performance 5W-40,208 L
Art. No. 0897 410 001Engine Oil ATF SyntheticTechnology 1 L
Art. No. 0897 420 001Gear Oils, Automatic Ultra -HC Synthetic 1L
Art. No. 0897 710 021Engine Oil 2 Stroke Semi-synthetic 1 L
Art. No. 0897 710 541Engine Oil 4 Stroke 5W-40Fully Synthetic 1 L
ទកថាជនយ នង ទាchemicals
ATF SP - III ATF T - IV
Wuerth Cambodiahttps://eshop.wuerth.de Chemicals 49
ទកថាជនយ នង ទាchemicals
Art. No. 5861 111 300
Petrol Injection Cleaner300ML
ទកងសតបចង
Art. No. 5861 113 500
Carburettor Cleaner500ML
សសងន
Art. No. 5861 101 300
Petrol Additive300ML
ទកជនយង
Art. No. 5861 011 300
Diesel Injection Cleaner300ML
ទកងសតបចសត
Art. No. 5861 001 150(150 ML)
Art. No. 5861 001 300(300 ML)Diesel Treatment AR
ទកជនយសត AR
Art. No. 5861 002 300
Winter Diesel Treatment300ML
ទកជនយសត សបរដវទកកក
Art. No. 5861 012 300
Diesel CombustionChamber Cleaner - 300ML
ទកងសតបកចះ
Art. No. 5861 014 500
Cleaner for Particulate Filter400ML
Art. No. 5861 112 300
Petrol System Cleaner300ML
សសញសតពនង
សសងសតតរងសបកឃ
Art. No. 5861 013 300
Diesel System Cleaner400ML
សសងសតពនសត
before after
before after
AGR
Solves starting diffi culties and jerkingEnsures smooth idling and a good gas intakeCares for a precise controlling of the injection valvesOptimises engine powerReduces fuel consumptionProtects against corrosion
Improves the warm-up phase and gas intakeOptimises engine powerReduces fuel consumptionImproves exhaust emission
Cares for optimal carburettor powerEnsures optimal throttle functioningOptimises the engine power
Extend service life of catalyst and lambda sensorImproves lubricationReduces fuel consumptionProtects against corrosion
Solves starting diffi culties, jerking and knockingEnsures smooth idling and a good gas intakeReduces soot emissions and particulate matterOptimises engine powerReduces fuel consumptionProtects against corrosion
Minimises repairing costs due to cleaning instead of exchange(without disassembly)Reduces fuel consumption
Reduces soot and particulate matter emissionsOptimises engine powerReduces fuel consumptionProtects against corrosion
Optimises engine powerReduces fuel consumptionProtects against corrosion
Minimises risk of failure of the injectionsystemSolves starting diffi culties, jerking andknockingOptimises engine powerProtects against corrosion
Improves lubricity
Solves starting diffi culties, jerking and knockingPrevent blocking of fuel fi lter
Wuerth Cambodiahttps://eshop.wuerth.de Chemicals 50
ទកថាជនយ នង ទាchemicals
Art. No. 5861 700 001
ADBLUE 1.89 LAdblueទកជនយងសត
Art. No. 5861 300 300
Engine Oil Treatment300ML
Art. No. 5861 301 300
Oil Smoke Stop300ML
ទកបតង
Art. No. 5861 311 150
Oil Leak Stop300ML
ទកបបរបង
Art. No. 5861 200 300
LPG Treatment300ML
Art. No. 5861 400 125
Transmission TreatmentManual 125ML
Art. No. 5861 401 150
Auto Transmission Treatment150ML
Art. No. 5861 410 150
Auto Transmission Flush150ML
Art. No. 5861 310 400
Engine Flush & Cleaner400ML
ទកងសតកងសន
ទកងជនយងសន
ទកងសតអបខអត
ទកជនយអបខអត
ទកជនយស LPG
Art. No. 5861 201 001
LPG Treatment Dos300ML
ទកជនយស LPG Dos
ទកជនយអបខ
Dos
Dos
Improves compressionOptimises engine powerReduces pollution emissionProtects against corrosion
Completes used engine oil substancesNeutralises combustion acidsPrevents engine oil dilutionProtects against corrosion
Stabilises viscosity of engine oilReduces oil consumptionAbsorbs engine noise
Regenerates shrunk sealsReduces engine noiseReduces oil consumption
Optimises switching functionsExtend service life of automatic transmissionsKeeps the new ATF oil clean for a longer period
Prevents foaming in automatic transmissionReduces engine noise
Stabilises viscosity of transmission oilSlows down oil ageingRehabilitates aff ected surfacesProtects against corrosion
Hardens valves and valve seatsPurifies deposits in evaporator and gas railEnsures long-term stability of fuelPrevents oxidationProtects against corrosion
Hardens valves and valve seatsIncreases lubrication
For diesel engines with SCR exhaust gas aftertreatment32.5% watery solution to reduce nitric oxide emissionsThis make it possible to fulfil Euro 4, Euro 5 and Euro 6 standards(for passenger vehicles).Meets ISO 22241-1 standardsManufacturer's authorisation for art. no. 5861 700 001 (1.89-litre bottle)Mercedes Benz, A 000 583 0107, BMW Group, 83190441139VW/Audi, G 052 910 A2, Mazda, 0000-AD-002
Improves the ignition behaviour of diesel fuels.Cleaner combustion.Reduces fuel consumption.Boosts the cetane numberCetane booster improves the ignition qualities of diesel fuels.Reduces emissions and improves cold-starting behaviour.Engine noises are also reduced.
Ensures cooling performanceEnsures functionality of cooling systemNeutralizes lime residue
Prevents loss of cooling waterProtects against engine damagesEnsures functionality of cooling system
Prevents loss of cooling waterProtects against engine damagesEnsures functionality of cooling system
For boosting the octane number in lower-grade fuels.Prevents wearImproves vehicle performanceClean combustionImproves octane numberReduces harmful exhaust gases
ទកថាជនយ នង ទាchemicals
Wuerth Cambodiahttps://eshop.wuerth.de Chemicals 51
Art. No. 5861 510 250
Radiator Cleaner and Conditioner250ML
ទកងសតធងទក
ទកបតធងទក
ទកបតធងទក HP
Art. No. 5861 500 150
Radiator Seal HP150ML
Art. No. 5861 005 300
DIESEL ADDITIVE CETANE BOOSTER300ML
ទកបនត Octaneកងធងង
ទកបនត Cetaneកងធងសត
Art. No. 5861 103 300
PETROL ADDITIVE OCTANE BOOSTER300ML
Art. No. 5861 501 300
Radiator Seal300ML
ែដលមាន លហរែខង
Additive for engines with non-hardened valve seatsOrganic sodium compoundsForms a protective layer on valves and valve discs.No heavy metal compoundsCan also be used in vehicles with retrofitted catalytic converter.Organic sodium compounds form a protective layer on valve seats and valve discsThis helps to avoid deformation of the valves and valve misalignment.
Art. No. 5861 102 250
PETROL LEAD SUBSTITUTE250ML
Next Material Processing បប សរៈសប
ចលលពតនលមតៈ https://eshop.wuerth.deេហយយខកដរះផលតផលលអកចងងរកPlease visit https://eshop.wuerth.de and enter article number orproduct name to search
Material Processing 52Wuerth Cambodiahttps://eshop.wuerth.de
Art. No. 0624 000 900Zebra Drill HSS 338 9MMArt. No. 0624 001 100Zebra Drill HSS 338 11MMArt. No. 0624 001 300Zebra Drill HSS 338 13MM
Art. No. 0625 100Twist Drill Bits HSS 10 MMArt. No. 0625 105Twist Drill Bits HSS 10.5 MM Art. No. 0625 115Twist Drill Bits HSS 11.5 MM
Art. No. 0625 120Twist Drill Bits HSS 12 MM Art. No. 0625 130Twist Drill Bits HSS 13 MMArt. No. 0625 140Twist Drill Bits HSS 14 MMArt. No. 0625 30Twist Drill bit HSS 3.0MM
Art. No. 0625 40Twist Drill Bits HSS 4MM Art. No. 0625 45Twist Drill Bits HSS 4.5MM Art. No. 0625 50Twist Drill Bits HSS 5MM
Art. No. 0625 55Twist Drill Bits HSS 5.5MM Art. No. 0625 60Twist Drill Bits HSS 6MMArt. No. 0625 65Twist Drill Bits HSS 6.5MM Art. No. 0625 80Twist Drill Bits HSS 8MM
Art. No. 0625 35Twist Drill Bits HSS 3.5MM
Diameter: 8 mmLength: 78 mmChip flute length: 38 mm
HSCO SPOT-WELD DRILL BIT
Art. No. 0584 111 200
Art. No. 0584 112 00
Sand Paper P1200សតមនបទក
Art. No. 0584 112 000
WATERPROOF ABRASIVE PAPERសតមនបទក
Art. No. 0603 300 13
HSS Bimetal Saw Blades T32300 x 13 x 0.65
រ
Art. No. 0616 100
CARBIDE MILLING BIT SET MX TEETH
Art. No. 0626 01
HSCo Twist Drill Bits Set, DIN338,19 pcs 1-10 MM
ឈតនកប
Art. No. 0632 02
Mount A2 (with central drill)បណលរមល
រសរសបរមល
Art. No. 0632 07
SLINGER SPRING A7
Art. No. 0633 6 Art. No. 0634 4
EMPTY BOX & Twist Drill Setsឣប នងឈតនក
DIN 338 TWIST DRILL BIT HSS TYPE RN នក
នកDIN 338 TWIST DRILL BIT HSS TYPE RN
material processing សមារៈសរាប
Sharply contoured working.Outstanding finish. Excellent contactwith the material and optimum gripFirst-rate initial and long-term grindingperformance with a long service lifeDense scattering
Silicon carbideCan be used without soaking,extremely flexible grain carrier
Silicium carbide close coating with abrasivesClose coating with abrasivesGrain range: P60 - P2500Sheet size: 280 × 230 mm
No saw blade offers morecutting performance and flexibility.
10 pieces Similar to DIN 8032/8033 — staggered tooth system.
Assembly drill bits for precise workingin steel, tip angle 130°.Highly precise drillingSelf-centringLong service life
Cold-formed assembly drill bits forworking in steel, tip angle 118°The Ø 13.0 mm drill shank is reducedto Ø 12.7 mmFor drill bit/material assignments,see overview tables
For using in hand drilling machinesand stable stationary machines.
Contents: dia.1.0-10.0x0.5 mm, 19-part
With centre drillShaft diameter: 11 mmDrive type: Hexagon
Slinger spring A7 for cylinder sawSPG-CYLSAW-(A7)-HSS-BIMETFor pressing out the cut-out workpiece
Cold-formed assembly drill bits forworking in steel, tip angle 118°19 pieces: 1 drill bit of each size from1.0-13.0 mm in 0.5 mm increments
For DIN 338twist drill bits
Suitable for hole-saw diameter:32 - 200 mm
Art. No. 0710 008
Art. No. 0632 16SAW-CYL-HSS-BIMET - D16MMArt. No. 0632 17SAW-CYL-HSS-BIMET - D17MM Art. No. 0632 25SAW-CYL-HSS-BIMET - D25MM
Art. No. 0632 30SAW-CYL-HSS-BIMET - D30MM
Art. No. 0632 51SAW-CYL-HSS-BIMET - D51MM Art. No. 0632 60SAW-CYL-HSS-BIMET - D60MM Art. No. 0632 68SAW-CYL-HSS-BIMET - D68MM
Art. No. 0632 76SAW-CYL-HSS-BIMET - D76MM
Art. No. 0639 10Hand Tap Set HSS 3 Taps 10 MM Art. No. 0639 12Hand Tap Set HSS 3 Taps 12 MM Art. No. 0639 16Hand Tap Set HSS 3 Taps 16 MM
Art. No. 0648 001 01610MM x 160MM
Art. No. 0648 001 21612MM x 160MM (100MM)
Art. No. 0584 112 000Drill SDS Plus, WL50 D6 x 160
Art. No. 0648 36 110Drill SDS Plus, WL50 D6 x 110
Art. No. 0648 001 22112MM x 210MM (150MM)
Art. No. 0648 006 011 6MM x 110MM (50MM)
Art. No. 0648 006 0166MM x 160MM (100MM)
Art. No. 0648 008 0118MM x 110MM (50MM)
Art. No. 0648 008 0168MM x 160MM (100MM)
Art. No. 0639 3Hand Tap Set HSS 3 Taps 3 MM
Art. No. 0642 110 125Hand Taps Taper DIN2181HSS (fine thread) 10 x 1.25
Art. No. 0642 310 125Hand Taps Plug DIN2181HSS (fine thread) 10 x 1.25
Art. No. 0639 4Hand Tap Set HSS 3 Taps 4MM Art. No. 0639 5Hand Tap Set HSS 3 Taps 5MM Art. No. 0639 6Hand Tap Set HSS 3 Taps 6MM
Art. No. 0639 8Hand Tap Set HSS 3 Taps 8MM
Art. No. 0632 32SAW-CYL-HSS-BIMET - D32MM
CYLINDER SAW HSS BI-METAL
MANUAL SCREW TAP SET HSS, DIN 352
MANUAL SCREW TAP, THIRD TAP HSS
Drill SDS Plus
Hammer Drill Set 4-FLU.SDS-Plus 7 Pcs
Thread cutting tool assortmentsHSS
Hammer Drill Assortment
Hammer Drill bit
Threaded die, Hssl Right-hand thread
LONGLIFE QUADRO-L HAMMER DRILL BITS
រមល
Material Processing 53Wuerth Cambodiahttps://eshop.wuerth.de
Complies with DIN 2181For metric ISO fine threads inaccordance with DIN 13
Solid hammer drill bit with aggressive 2-cutterhead, centring point and Vario spiral conveyorwith core reinforcement for a significantlyimproved drilling speed. Specially optimisedfor cordless hammer drills.
7 pieces, including one of each of the following: diameter5 x 110/50, 6 x 110/50, 8 x 110/50, 6 x 160/100, 8 x 160/100,10 x 160/100, 12 x 160/100. Solid hammer drill bit with aggressive2-cutter head, centring point and Vario spiral conveyor with corereinforcement for a significantly improved drilling speed. Speciallyoptimised for cordless hammer drills.
With SDS-plus mounting shaft
Art. No. 0648 771 01110.0 MMArt. No. 0648 771 01610.0 MM Art. No. 0648 771 21612MM x 160 MMArt. No. 0648 771 22112.0MM x 210 MM
Art. No. 0648 771 41614MM x 160MM Art. No. 0648 776 0116.0MM x 110 MMArt. No. 0648 776 0166.0MM x 160 MM
Art. No. 0652 101.5mm, 30 x 11mm, M 10Art. No. 0652 121.75mm, 38 x 14mm, M 12 Art. No. 0652 142mm, 38 x 14mm, M 14Art. No. 0652 162mm, 45 x 18mm, M 16
Art. No. 0652 182.5mm, 45 x 18mm, M 18 Art. No. 0652 61mm, 20 x 7mm, M 6 Art. No. 0652 81.25mm, 25 x 9mm, M 8
With SDS-plus mounting shaftEnables smooth drillingIncreased durabilityIncreased resistance to breakage
Assortment Tapand Die M 3-12
Assortment Tap andDie (M5-M20),43pcs
Fig. 1 Fig. 2
Brick/Block Concrete
material processing សមារៈសរាប
For use in all steel materials, plus cast metal,copper, bronze, aluminium, plastics and wood.
Complies with DIN 352For metric ISO threads in accordance with DIN 13Comprises one taper tap, one second tap and one third tap
រាល
រាល
រញ
Art. No. 0648 301
ឈតនថ
Art. No. 0965 92 100 Art. No. 0965 92 200
ឈតរញ នងាល
Art. No. 0648 770 001
ឈតនថ
នថមខពរ
នថមខពរ
នថមខបន
For free-hand grinding withelectric or pneumatic anglegrinders.
Comply with the most demandingsafety requirements of Europeanstandard EN13743.Heat-treated aluminum oxide cloth.Glass fabric carrier disc.
Dia. × thickn in mm :355 × 3.0 *, Hole in mm: 25.40Disc with medium hardness.High-performance standard disc with excellent performance values.Cutting solid materials, pipes, profiles and metal sheels
Dia. × thickn in mm :100 × 1.0 *, Hole in mm: 16.00Free of iron, cholrine and sulfur (≤ 0.1%).High-performance standard disc with excellent performance values.Cutting solid materials, pipes, profiles and stainless steel sheels.
Dia. × thickn in mm :100 × 1.0 *, Hole in mm: 16.00High-performance standard wheel with excellent performance valuesCutting of metal sheels, pipes, profiles, steel cables, iron reinforcements etc.
Dia. × thickn in mm :100 × 6.0 *, Hole in mm: 16.00Wheel with medium hardnessHigh-performance standard wheel with excellent performance valuesGringding edges, weld seams and surfaces
Chrome vanadium, forgedSupplied in plastic caseContents: 5 pcs.5 screw extractorsSizes 1, 2, 3, 4 and 5 (M3–M18)
Nominal voltage: 400 V/DCFrequency: 50 HzPower rating: 5 kWLength: 44 cm, Width: 14 cmHeight: 23 cm, Heat class: FCable cross section: 7.5 mm²Number of phases: 1 PCSSecondary voltage: 5.6 V/DCMain fuse: 16 A slow
Control current connection socket: XLRProduct weight (per item): 31000 gConditions for power rating:at 100% action timePower (welding): 20 kWIP protection class: IP 21Secondary-current short circuit:4.5 kA/AC/DCMax. current: 0.63 kA/AC/DC
High-performance standard wheel withexcellent performance valuesCutting solid material, pipes, profilesand metal sheels
Art. No. 0695 941 616NRPNCH-4161-6MM
Art. No. 0695 941 618NRPNCH-4161-8MM
Art. No. 0669 101 025Blue for steel 100 x 3.0 (16.00)Art. No. 0669 101 825Blue for steel 180 x 2.5 (22.20)Art. No. 0669 103 502 Blue for steel 350 x 2.5 (25.40)
Art. No. 0695 347 940Bolt Extractor M3-M6Art. No. 0695 348 127Bolt Extractor M6-M8 Art. No. 0695 348 314 Bolt Extractor M8-M11
Art. No. 0695 941 62Letter Punch 10 MM
Art. No. 0695 941 626 Letter Punch 6 MM
Art. No. 0695 348 501Bolt Extractor M11-M14 Art. No. 0695 348 688Bolt Extractor M14-M18
Cutting Disc, Blue for steelតសបក ពណៀវ
តសបក ពណៀវCutting Disc Blue for steel
បសបក ពណៀវ
សនសបានរថយន
Roughing wheel blue for steel
បFlap Disc
Spot Welder T4500/SN2
NUMBER PUNCHES
SCREW EXTRACTOR
ឈតឧបករណដកបឡងក
ឧបករណដកបឡងក
SCREW EXTRACTOR ASSORTMENT, 5 PCS.
ឣករ
ខ
LETTER PUNCHES
cutoff wheel green for stainless steel
តសបកបពណតង
តសបកពណតង
Cutting Disc Green forstainless steel
Material Processing 54Wuerth Cambodiahttps://eshop.wuerth.de
For removing snapped off screws orthreaded bolts. Chrome vanadium, forged
material processing សមារៈសរាប
Art. No. 0669 203 553
Art. No. 0669 261 004
Art. No. 0579 580 504
Art. No. 0691 500 270
Art. No. 0695 684 353
Art. No. 0669 231 001
Art. No. 0669 230 101
Bi-metal bladeAdjustable blade with 3stop positionsFully retractable bladeBlade change in seconds
Material: ABS PlastikLength: 130 mmWeight: 30 g
Material: ABS PlastikLength: 165 mmWeight: 80 g
With „Break-off“ blade- systemMetal rail and pocket clip.Internal storage incl. two spare blades.Blade dimensiom: 85 × 9 mm
With „Break-off“ blade- systemMetal rail and automatic blade lock.Internal storage incl. two spare blades.Blade dimensiom: 100 × 18 mm
Cold-formed assembly drill bits for working in steel, tip angle 118°,155 piece assortment.Great-value HSS twist drill for general use in steel up to 800 N/mm²Clearly defined, consistent quality — considerably higher than the marketstandardContents: 155 pieces
16 pieces: Ø 19, 22, 25, 32, 35, 38, 44, 51, 57, 64, 67, 76 mmQuick and clean cut thanks to the HSS bimetal constructionNumber of teeth: 6/inchCutting depth: 32 mm
Ergonomic, non-slip 2C handleSits securely and comfortably in the handIntegrated blade magazine for 5 bladesOptimal storage for spare bladesOne bi-metal trapezoidal blade included
For steel, brass, aluminum, copperstainlesssteel and composite pipes.
Max. pipe dia.: 60mm,Min. pipe dia.:10mm,Min. total length: 260, Max. total length: 310,L2: 155mm, H : 90mm
Steel pipe cutterឧបករណតទាក
បតCarpet knife, 2-part handle, L170MM
បតUNIVERSAL KNIFE
បតUNIVERSAL KNIFE
ឈតនកDIN 338 TWIST DRILL BITASSORTMENT HSS TYPE RN
ឈតរមលCYLINDER SAW ASSORTMENT HSS
Material Processing 55Wuerth Cambodiahttps://eshop.wuerth.de
material processing សមារៈសរាប
Art. No. 0715 66 015
Art. No. 0715 66 915
Art. No. 0715 66 920
Art. No. 0964 625 020
Art. No. 0964 632
Art. No. 0715 55 14
Next Safety Equipmentបប សរៈសវតព
ចលលពតនលមតៈ https://eshop.wuerth.deេហយយខកដរះផលតផលលអកចងងរកPlease visit https://eshop.wuerth.de and enter article number orproduct name to search
LIFTING STRAPេង
េង
េង
វររញ
Safety Equipment 56Wuerth Cambodiahttps://eshop.wuerth.de
Material: Polyester - PES, EN standard: 1492-1
Width of band: 30 mm
Hood and drawstringSilicone-free. 100% polyesterAnti-static and lint-freeBreathableElasticated sleeves, ankles and waistTwo-way covered zipWashable up to 40°C or dry clean
Material: Polyester - PESSize: LColour: BlueSilicone-free: Yes
Colour of disc: ClearEN standard: 166, 170Mechanical strength:B (120m/s)
Colour of disc: ClearEN standard: 166, 170Mechanical strength:F (45m/s)
Two-component technology for reliableprotection and maximum comfortSpaciousIdeal for users who wear glasses
Sporty eye protection with enhancedcomfort
First class polycarbonate lens andpolycarbonate templeSporty & dynamic designAnti-scratch & impact resistanceUV protection up to 99.9%CE Certificated; Conform to EN 166-2001AS/NZS Certificated; Conform toAS/NZS 1337.1:2010Conform to ANSI Z87.1-2010
Filter class: FFP1 NR DVersion: With valveEN standard: 149:2001 + A1:2009
SNR attenuation value: 23 dBL attenuation value: 13 dBM attenuation value: 20 dBH attenuation value: 27 dB
Lightweight and comfortable designEasy height adjustment of the headbandVersatile in use, Very comfortableWeight: 150 gTested in accordance EN 352
Complete set for protection against solvents. Comprising a half facemask, gas filters, particle pre-filter and holder in a practical box.
Complete protection andcomfortable to wear thanksto special, soft filter materials
Load-bearing capacity (single direct):1000 kgLoad-bearing capacity (single u-shape): 2000 kgLoad-bearing capacity (single noosed): 800 kgMin./max. temperature conditions: -40 to 100 °C
Art. No. 0713 505 02usable length: 2 m
Art. No. 0714 505 04usable length: 4 m
Art. No. 0899 103 120EN166-PC- Clear
Art. No. 0899 103 121EN166-PC- Black
Art. No. 0899 103 122EN 166- Yellow
Art. No. 0899 173 100
Safety Equipment សមារៈសវតភាព
Lifting itemsFlexible sling for all types of loads with temperature range of – 40°C to + 100°C
Lifting itemsFlexible sling for all types of loads with temperature range of – 40°C to + 100°C
Round Sling, L 3m, PurpleLoad-bearing capacity:- Single direct 1000kg- Single U-shaped 2000kg- Single nosed 800kg
Art. No. 0713 50 12
Round sling, l 3m, purple
Art. No. 0713 50 28
Round sling, l 4m, green
Art. No. 0899 025 011
REUSABLE PAINTING SUIT
Art. No. 0899 102 110
FULL-VISION GOGGLES ANDROMEDA ®នសវតព
Art. No. 0899 102 330
SAFETY GLASSES SPICA ®នសវតព
Art. No. 0899 111
Fine Mask Dust FFP1 D Valve EN149 សធលសវតព
Art. No. 0899 300 210
Ear Protection Cap សររៀក
PAINT-SPRAY SET ឈតសញ
SAFETY GLASSES „STANDARD“
នសវតព
Round Sling, L 4m, GreenLoad-bearing capacity:- Single direct 2000kg- Single U-shaped 4000kg- Single nosed 1600kg
Art. No. 0899 435 07PROTGLOV-NTR-330MM-SZ7
Art. No. 0899 435 09PROTGLOV-NTR-330MM-SZ9
Art. No. 5357 209 036S1P-Lowcut-Leather-Black Size 36Art. No. 5357 209 038S1P-Lowcut-Leather-Black Size 38
Art. No. 5357 209 039S1P-Lowcut-Leather-Black Size 39Art. No. 5357 209 040S1P-Lowcut-Leather-Black Size 40
Art. No. 5357 209 041S1P-Lowcut-Leather-Black Size 41Art. No. 5357 209 042S1P-Lowcut-Leather-Black Size 42
Art. No. 5357 209 043S1P-Lowcut-Leather-Black Size 43Art. No. 5357 209 044S1P-Lowcut-Leather-Black Size 44
Durable HDPE shell6 Point pin lock suspension for secure fittingAdjustable harness for better wearWeight: 350g, Adjustable size: 53 - 63cmTwo color options white/yellowBreathable & ComfortableConform to EN 397/ A1:1996, certified by TÜV
Art. No. 0899 200 85Safety Helmet (Yellow)
Art. No. 0899 200 86Safety Helmet (White)
EAR PLUGS X-100ឆកររៀក
CORDED EAR PLUGS X-100ឆកររៀក ន
Safety Equipment 57Wuerth Cambodiahttps://eshop.wuerth.de
Safety Equipment សមារៈសវតភាព
L attenuation value: 34 dBM attenuation value: 34 dBH attenuation value: 36 dBColour: Neon green
SNR attenuation value: 37 dBContainer: Disposable dispenserVersion: In pairs in polybagNumber of ear plugs: 100 Pair
L attenuation value: 34 dBM attenuation value: 34 dBH attenuation value: 36 dBColour: Neon green
SNR attenuation value: 37 dBContainer: Disposable dispenserVersion: In pairs in polybagNumber of ear plugs: 200 Pair
ាមងធម
Art. No. 0899 400 331
ASSEMBLY GLOVE „FLEXTON”
ាម CONSTRUCT
Art. No. 0899 404 320
WORKING GLOVE ″CONSTRUCT″
ាមររតគមNITRILE CHEMICAL PROTECTIVE GLOVE
ាមររមត
Art. No. 0899 451 09
NITRILE CHEMICAL PROTECTIVE GLOVE
មកផរអតទច
Art. No. 0984 700 200
WELDING HELMET “SOLAr”
កងសវតពSAFETY SHOES S1P „NEW POSEIDON“
For precision and small parts handling in dry and slightlyoiled environment. Fine assembly, electro mechanics,packaging etc.
7 gauge polycotton knitted glove, withone side red PVC dots on the palm.Grey shell: 65% polyester & 35% cottonRed dots, 100% PVC. Good grip performance. Good wearing comfort & fit
Basic working glove forlight warehouse work,transportation, glass/ceramicindustry (Handing largepanes or dry metal).
Cotton velour lining. 100% impermeableDiamond surface pattern for a secure gripChemical and liquid protection against a largenumber of alkaline solutions, acids, greases,oil and in some cases solventsSilicone-free manufacturing process. Food-tested
Robust natural latex coatingSize: 9Material: Kevlar with natural latex coatingEN standard: 388Category: 2
Auto darkening welding helmet430g, –20°C to +70°C
Solar cell (no battery change)
Light/dark switching time:1/25000
Iron cutting/grinding /WeldingHigh impact resistance nylon
Next Give aways បប វតអនសវរយ
Art. No. 0899 300 331
Art. No. 0899 300 332
Safety Helmet មកសវតព
ចលលពតនលមតៈ https://eshop.wuerth.deេហយយខកដរះផលតផលលអកចងងរកPlease visit https://eshop.wuerth.de and enter article number orproduct name to search
Giveaways 58Wuerth Cambodiahttps://eshop.wuerth.de
វតឣនសាវរយGiveaways
Art. No. 0WAG900427 Art. No. 0WAG900429
70th Anniversarystainless steel bottle
Art. No. 0WAG900430
Baseball cap 70
70th anniversarygolf umbrella
Art. No. 0WAG900447
Baseball cap black & white
750ml, 29x7mmGeneral use
100% cotton, heavy brush6 panelBlack sandwichMetal closing
Art. No. 0WAG900458
FIA POLO Shirt
General Use General Use
210T polyester fabricFiberglass shaft, frame and ribRadius 685mm, 8 panelsGeneral use
100% cotton,heavy brush6 panelwhite sandwichvelcro closing
Art. No. 0WTE112010
Baseball Cap Red
Art. No. 0899 400 331
Art. No. 0899 435 07
Art. No. 0899 300 331
Art. No. 0WAG900436
Wall clock Aluminum metal caseSweep movement,no noiseMineral glasses
Material:metal frame with sweepmovementSize: 30 cm
Art. No. 0WGE300114
Wall Clock Metal 30cm
Art. No. 0WAG900439Sticky note
80GSM paper50 sheetsSize: 100*75mmFSC certified source,environmental friendly
for mobile125g, 110x68x9.9mm4000mAh,Lithium polymer battery
Art. No. 0WGE701022
Power Bank, 4000MAH
Art. No. 0WGE900235
Travel-BagSport Sline -PE-680x315x300mm
Sport Sline -PE-435x320x200mm Art. No. 0WGE900236
Back Pack
Art. No. 0WGE900437
Cooling bag
Made of 230D fine polyester,with rip-free PVC backingSize 37*30*20cmWith food grade PEVA liningKeeping the food insidecool and fresh Grey/Red - M Art. No. 0WTE900206
Wuerth OutdoorJacket
Art. No. 0WGE96562Name Card Case
Holding name cards Holding name cards Art. No. 0WGE96563
Visit-Card-Holder-Red-Stripe
Art. No. 0WAG900419
Ball pen
Quality ball point penBlack matt paintMetal tipSmooth writingBlack inkball pen with touch stylus
Art. No. 0WGE047003
Ball pen black red
Purchasing 2 lines,get 1pc free !
Purchasing 2 lines,get 1pc free !
Purchasing 10 lines,get 1pc free !
Purchasing 10 lines,get 1pc free !
Purchasing 10 lines,get 1pc free !
Purchasing 10 lines,get 1pc free !
Purchasing 3 lines,get 1pc free !
Purchasing 8 lines,get 1pc free !
Purchasing 7 lines,get 1pc free !
Purchasing 5 lines,get 1pc free !
Purchasing 5 lines,get 1pc free !
Purchasing 5 lines,get 1pc free !
Purchasing 12 lines,get 1pc free !
Purchasing 8 lines,get 1pc free !
Purchasing 15 lines,get 1pc free !
Purchasing 15 lines,get 1pc free !
Purchasing 20 lines,get 1pc free !
Purchasing 10 lines,get 1pc free !
Giveaways 59Wuerth Cambodiahttps://eshop.wuerth.de
វតឣនសាវរយGiveaways
Art. No. 0WGE300178 Art. No. 0WAG900424Art. No. 0WAG900425
Lux Chrono WatchStailess Steel
Art. No. 0WAG900423
Ceramic mug
Man’s Watch, 44mm &Woman’s Watch, 40mm
Art. No. 0WGA900428Windscreen cover
Made of fine ceramicElegant matt finish outsideGloss red insideSize 8.5*11.5cmFood safety standard
Art. No. 0WGE900233
Key Holder/Bottle-Opener/LED
General UseFor holding keys andopening bottle
Heavy duty stainless steel caseSeiko VD 57 chronographmovementMineral glasses5ATM water resistant, Luminous handsGenuine leather strap
PE foam with silvercoating on one sideSize 130*60cmIncluding two suctioncups. Designed toreflect the sun light forthe car screen and keepthe inside cool
Art. No. OWAG900421
Key holder withbottle opener
Art. No. 0899 400 331
Art. No. 0899 435 07
Art. No. 0899 300 331
Art. No. 0WGE011102
Lanyard 100% polyester,58.5*2cmWith heavy duty zincalloy hook
Function: Pliers, Knife bladeWire cutter and stripperSaw, Awl, Bottle openerPhilip screw driverMedium/smallflat screw driver
Art. No. 0WGE103669
Multi function tools
Stainless steel basewith doming epoxySize 3*2cmWith butterfly clutch onthe backside
Art. No. 0WAG900418
Pin
Purchasing 2 lines,get 1pc free !
Polo shirt- black
Purchasing 6 lines,get 1pc free !
Purchasing 20 lines,get 1pc free !
Purchasing 20 lines,get 1pc free !
Purchasing 5 lines,get 1pc free !
Purchasing 12 lines,get 1pc free !
Purchasing 4 lines,get 1pc free !
Purchasing 3 lines,get 1pc free !
Purchasing 25 lines,get 1pc free !
Purchasing 3 lines,get 1pc free !
Art. No. 0WGE96585961
Writing case
Material: imitation leatherSize:256*332*25 MM Designed for A4 note pad,able to put in business card,credit card, pen, mobile orpocket calculator
Purchasing 3 lines,get 1pc free !
Polo Shirt-White
Purchasing 6 lines,get 1pc free !
WÜrth products Magazine
WÜrth (Cambodia) Ltd.Head Office: Phnom Penh# 164, St. 598, Sangkat Phnom Penh Thmei,Khan Sen Sok, Phnom Penh 12101.Tel: 023/098 885 [email protected]
Battambang Branch:#70, St. 02, Phum Prekmohatep,Sangket Svay Por, Battambang City.Tel: 098 500 002 [email protected]
Siem Reap Branch:NR 6A, Phum Watbo, Sangkat Salakamrerk,Siem Reap CityTel: 081 211 118 [email protected]
Sihanoukville Branch:#148, St. Ekreak, Sangkat 2,Mittapheap,Preah SihanoukTel: 081 888 [email protected]
All Rights Reserved - Wuerth (Cambodia) Ltd.