Trinitron Color TV - Sony

Sony KV-XA21 Group N7 (GB-Dummy)_4-080-391-E5 (1)

Trinitron Color TV

© 2001 Sony Corporation

KV-XA21

4-080-391-E5 (1)

N90

• Before operating the unit, please read this manual thoroughly and retainit for future reference.

Operating Instructions GB

01GB01COVTWN.p65 18/03/04, 09:241

Black

2


WARNING• Dangerously high voltages are present inside the TV.

• Operate the TV only between 110 V AC.

To prevent fire or shock hazard, do not exposethe TV to rain or moisture.

Do not operate the TV if any liquid or solid objectfalls into it. Have it checked immediately byqualified personnel only.

Do not open the cabinet and the rear cover of theTV as high voltages and other hazards arepresent inside the TV. Refer servicing anddisposal of the TV to qualified personnel.

Your TV is recommended for home use only.Do not use the TV in any vehicle or where it maybe subject to excessive dust, heat, moisture orvibrations.

Do not block the ventilation openings of the TV.Do not install the TV in a confined space, suchas a bookcase or built-in cabinet.

For children’s safety, do not leave childrenalone with the TV. Do not allow children toclimb onto it.

Do not plug in too many appliances to the samepower socket. Do not damage the power cord.

Clean the TV with a dry and soft cloth.Do not use benzine, thinner, or any other chemicalsto clean the TV. Do not scratch the picture tube.

For your own safety, do not touch any part of theTV, the power cord and the antenna cable duringlightning storms.

Do not place any objects on the TV.

01GB02TOCTWN.p65 18/03/04, 09:242

Black

3

GB


Advanced Operations

Customizing the picture and sound ....................................................... 13

Viewing your favorite channels ............................................................... 15

Blocking the channels (“CHILD LOCK”) .............................................. 16

Enjoying stereo or bilingual programs ................................................... 17

Additional Information

Self-diagnosis function.............................................................................. 18

Troubleshooting ......................................................................................... 19

Overview of controls ................................................................................. 22

Specifications .............................................................................. Back cover

Usin

g Yo

ur N

ew TV

Table of Contents

Using Your New TV

Getting Started ............................................................................................. 4

Step 1: Connect the antenna .................................................................. 4

Step 2: Insert the batteries into the remote .......................................... 5

Step 3: Preset the channels automatically ........................................... 5

Connecting optional components ............................................................. 6

Securing the TV ............................................................................................ 7

Presetting channels ...................................................................................... 8

Watching the TV ........................................................................................ 10

Pull the power cord out by the plug. Do not pullthe power cord itself. Even if your TV is turnedoff, it is still connected to the AC power source(mains) as long as the power cord is plugged in.Unplug the TV before moving it or if you are notgoing to use it for several days.

Install the TV on a stable TV stand and floorwhich can support the TV set weight. Ensure thatthe TV stand surface is flat and its area is largerthan the bottom area of the TV.

WARNING (continued)

01GB02TOCTWN.p65 18/03/04, 09:243

Black

Using Your New TV4


VIDEO

VIDEO IN

VIDEO OUT

AUDIO

R L1

L(MONO)R

VIDEOIN

MONITOR OUT

AUDIO VIDEO

Using Your New TV

Getting Started

Step 1Connect the antennaIf you wish to connect a VCR, see the Connecting a VCR diagram below.

Using Your New TV

F connector(not supplied)

Rear of TV

Connecting a VCRTo watch the video input, press VIDEO (see page 11).

: Signal flow

or

Antenna cable (not supplied)


VIDEO (yellow)AUDIO-L (MONO) (white)AUDIO-R (red)

To videoand audiooutputs

Audio/Video cable(not supplied)

To 8(antenna)

To antennaoutput

: Signal flow

VCR

To VIDEO IN 1

Rear of TV

Antenna cable(not supplied)

01GB03GETTWN.p65 18/03/04, 09:254

Black

Using Your New TV 5

Usin

g Yo

ur N

ew TV


Front of TV

Notes• With the “VIDEO MULTI SYSTEM” input terminal, you can also receive

PAL, NTSC and SECAM video signals when using VIDEO IN 1 jacks atthe rear of your TV or the VIDEO 2 INPUT at the front of your TV.

• If you connect a monaural VCR, connect the yellow plug to VIDEO (theyellow jack) and the black plug to AUDIO-L (MONO) (the white jack).

• When no signal is input to the connected video equipment, the TV screenbecomes blue.

CAUTION• Do not connect the power cord until you have completed making all other

connections; otherwise a minimum leakage current might flow throughthe antenna and other terminals to ground.

• To avoid battery leakage and damage to the remote, remove the batteriesfrom the remote if you are not going to use it for several days. If anyliquid that leaks from the batteries touches you, immediately wash itaway with water.

Insert the batteriesinto the remote

Step 3Preset the channels automatically

Tips• If you want to stop automatic channel presetting, press SELECT.• If your TV has preset an unwanted channel or cannot preset a particular

channel, then preset your TV manually (see page 9).• The AUTO PROGRAM button on the remote works as the AUTO

PROGR button on the TV.

AUTOPROGR

11 2 3

1

2

3

CABLE: ON

AUTO PROGRAM

SLEEP

CABLEAUTO

PROGRAMADD/

ERASE

PIC MODE

POWER

CHANNEL

POWER

STANDBY/STEREO/WAKE UPSELECT VIDEO INPUT VOLUMEAUTO

PROGRR

VIDEO 2 INPUT

VIDEO L (MONO) AUDIO

Step 2

Note• Do not use old batteries nor use different types of batteries together.

01GB03GETTWN.p65 18/03/04, 09:255

Black

Using Your New TV6


Connecting optional components

You can connect optional audio/video components, such as a VCR, multi disc player,camcorder, video game or stereo system.

To watch the video input of the connected equipment, press VIDEO (see page 11).

Connecting a camcorder/video game equipmentusing the video input jacks

Notes• With the “VIDEO MULTI SYSTEM” input terminal, you can also receive

PAL, NTSC and SECAM video signals when using VIDEO IN 1 jacks atthe rear of your TV or the VIDEO 2 INPUT at the front of your TV.

• You can also connect video equipment to the VIDEO IN 1 jacks at the rearof your TV.

Connecting audio/video equipment using theMONITOR OUT jacks

Note• If you connect a monaural VCR, connect the yellow plug to VIDEO (the

yellow jack) and the black plug to AUDIO-L (MONO) (the white jack).

Front of TV

Camcorder

Video gameequipment

To video andaudio outputs

: Signal flow

To VIDEO 2 INPUT

or

Audio/Video cable (not supplied)

VIDEO (yellow)AUDIO-L (MONO) (white)AUDIO-R (red)

Rear of TV

Toantennaoutput

To video andaudio inputs

orAudio system

Toaudioinputs

VCR

: Signal flow


Audio/Video cable (not supplied)

L(MONO)R

VIDEOIN

MONITOR OUT

AUDIO VIDEO

1

ToMONITOROUT

R

VIDEO 2 INPUT


CHANNEL

POWER


PROGRR

VIDEO 2 INPUT


01GB03GETTWN.p65 18/03/04, 09:256

Black

Using Your New TV 7

Usin

g Yo

ur N

ew TV


Securing the TV

To prevent the TV from falling, secure the TV using one of the following methods:

A With the supplied screws, attach the band to the TV stand and to the rear ofthe TV using the provided hole.

or

B Put the cord or chain through the clamps to secure the TV against a wall orpillar.

Note• Use only the supplied screws. Use of other screws may damage the TV.

20mm

3.8 mm

or

A B

01GB03GETTWN.p65 18/03/04, 09:257

Black

8 Using Your New TV


Presettingchannels

You can preset cable TV, VHF or UHFbroadcast channels using the remote andthe buttons on your TV as well.

Presetting channels automatically

1 Press POWER on the TV toturn on the TV.

2 Press CABLE to select“CABLE: ON”.

3 Press AUTO PROGRAM.

Notes• If you select “CABLE: ON”, you will be able to receive 125 cable TV

channels.If there are no cable TV channels, you will receive VHF broadcastchannels only.

• If you select “CABLE: OFF”, you will be able to receive 68 VHF or UHFbroadcast channels only.

TV

1 2 3

4 6

7 8 9

0

5

POWER

TV

DISPLAY

VIDEO

MUTING

MTS

SOUNDMODE

FAVORITE

WAKE UP

SLEEP

CABLEAUTO

PROGRAMADD/

ERASE

JUMP ENT

CHVOL

SELECT

PIC MODE

CABLE

AUTOPROGRAM

1 2 3

AUTOPROGRAM

CABLE: ON

CABLE

AUTOPROGR

POWER

CHANNEL

POWER

STANDBY/

STEREO/

WAKE UPSELECT VIDEO INPUT VOLUMEAUTO

PROGRR

VIDEO 2 INPUT


POWER

01GB04ADVTWN.p65 18/03/04, 09:258

Black

9Using Your New TV

Usin

g Yo

ur N

ew TV


Presetting the channelsmanually

To receive a new channel or a channel with a weak signal, preset the channelmanually.

1 Press number buttons to select the desired channel number, then press ENT.

2 Press ADD/ERASE.

“+” appears beside thechannel number, indicatingthat presetting is complete.

Disabling channel numbersBy disabling unused or unwanted channel numbers, you can skip those channelnumbers when you press CH +/–.

1 Press CH +/– until the unused or unwanted channel numbers appears on thescreen.

2 Press ADD/ERASE.

“–” appears beside thechannel number, indicatingthat disabling is complete.

To cancel the skip settingPreset the channel again.

ADD/ERASE –25

TV

1 2 3

4 6

7 8 9

0

5

SOUNDMODE

FAVORITE

WAKE UP

SLEEP

CABLEAUTO

PROGRAMADD/

ERASE

JUMP ENT

CHVOL

SELECT

PIC MODE

+25ADD/

ERASE

ADD/ERASE

ENT

CH +/–

Numberbuttons

01GB04ADVTWN.p65 18/03/04, 09:269

Black

10 Using Your New TV


1 Press POWER to turn onthe TV.

When the TV is in thestandby mode (theSTANDBY indicator on theTV is lit red), press POWERon the remote orCHANNEL +/– on the TV.

2 To select the channelnumber, press the numberbuttons and then pressENT, or press CH +/–.

3 Press VOL +/– to adjustthe volume.

Watching the TV

This section explains functions usedwhile watching the TV. Most operationscan be done using the remote.

MUTINGDISPLAY

POWERVIDEOTV

Number buttons

SELECT

VOL +/–CH +/–

SLEEP

WAKE UP

+ or –

TV

1 2 3

4 6

7 8 9

0

5

POWER

TV

DISPLAY

VIDEO

MUTING

MTS

SOUNDMODE

FAVORITE

WAKE UP

SLEEP

CABLEAUTO

PROGRAMADD/

ERASE

JUMP ENT

CHVOL

SELECT

PIC MODE

JUMP

VOL

1 2 3

4 5 6

7 8

0

9

CH

ENT

ENTor

ENT

CHANNEL

POWER


PROGRR

VIDEO 2 INPUT


CHANNELSELECT TV/VIDEO VOLUMEAUTOPROGR

POWER

POWER

STANDBY/WAKE UPindicator

01GB04ADVTWN.p65 18/03/04, 09:2610

Black

11Using Your New TV

Usin

g Yo

ur N

ew TV


To

Turn off temporarily

Turn off completely

Mute the sound

Watch the video input(VCR, camcorder, etc.)

Change the color system setting(for the VIDEO INPUT jack only)

Jump back to the previous channelnumber

Display the on-screen information*

Do this

Press POWER on the remote. The STANDBY indicatoron the TV lights up red.

Press POWER on the TV.

Press MUTING.

Press VIDEO to select “VIDEO 1” or “VIDEO 2”.To return to the TV program, press TV.

Press SELECT repeatedly until “COLOR SYS” appears,then press + or – to select the appropriate color systemuntil the color is optimal.

Press JUMP.

Press DISPLAY.

Additional tasks

continued

* The picture, sound, and either the channel number or video input aredisplayed. The on-screen display for the picture and sound informationdisappears after about three seconds.

Changing the on-screen display language

1 Press SELECT until“ /LANGUAGE: ”appears on the screen.

2 Press + or – to select“ENGLISH“.

Tip• You can also use SELECT and VOLUME +/– on the TV to select the on-

screen display language.

SELECT

AUTO PAL SECAM NTSC3.58 NTSC4.43

01GB04ADVTWN.p65 18/03/04, 09:2611

Black

12 Using Your New TV


Setting the Wake Up timer

1 Press WAKE UP until thedesired period of timeappears.

The Wake Up timerstarts immediatelyafter you have set it.

2 Select the channel number or video input you want to display when youwake up.

3 Press POWER on the remote or set the Sleep timer if you want the TV to turnoff automatically.

The WAKE UP indicator on the TV lights up orange.

To cancel the Wake Up timerPress WAKE UP until “WAKE UP TIMER: OFF” appears or turn offthe TV’s main power.

Note• If no buttons or controls are pressed for more than two hours after the

TV is turned on using the Wake Up timer, the TV automatically goes intothe standby mode. To continue watching the TV, press any button orcontrol on the TV or the remote.

Setting the Sleep timer

Press SLEEP until thedesired period of timeappears.

The Sleep timerstarts immediatelyafter you have set it.

To cancel the Sleep timerPress SLEEP until “SLEEP TIMER: OFF” appears or turn the TV off.

WAKE UP TIMER:10M

WAKE UP TIMER:OFF WAKE UP TIMER:12H00M

After 10 minutes

No Wake Up Timer After 12 hours

WAKE UP

SLEEP TIMER:30M SLEEP TIMER:60M

SLEEP TIMER:OFF SLEEP TIMER:90M

After 30 minutes

No Sleep Timer

After 60 minutes

After 90 minutes

SLEEP

Watching the TV (continued)

01GB04ADVTWN.p65 18/03/04, 09:2612

Black

13Advanced Operations


Advanced Operations

SOUND MODE

Customizing thepicture and sound

You can customize the picture andsound by selecting the picture andsound modes or by adjusting itssettings.

You can change the sound effect byselecting the surround mode.

Selecting the picture and sound modes

To select the picture modePress PIC MODErepeatedly until you getthe desired picture mode.

Select To

“DYNAMIC” view high contrast pictures.

“STANDARD” view normal contrast pictures.

“SOFT” view mild pictures.

To select the sound modePress SOUND MODErepeatedly until you getthe desired sound mode.

Select To

“DYNAMIC” listen to dynamic and clear sound that emphasizes the low andhigh sound.

“DRAMA” listen to sound that emphasizes vocals and background music.

“SOFT” listen to soft sound.

PIC MODE

SELECT+ or –

≥ DYNAMIC ≥ DRAMA ≥ SOFTSOUNDMODE

STANDARDDYNAMIC SOFTPIC MODE

continued

TV

SOUNDMODE

FAVORITE

WAKE UP

SLEEP

CABLEAUTO

PROGRAMADD/

ERASE

CHVOL

SELECT

PIC MODE

Ad

van

ced

Op

era

tion

s

01GB05ADVTWN.p65 18/03/04, 09:2613

Black

14 Advanced Operations


Adjusting the picture and sound settings

1 Press SELECT until thedesired setting appears.

Each time you pressSELECT, the settingitem will change as follows:

2 Press + or – to adjust theitem.

3 To adjust other items, repeat steps 1 to 2.

* “HUE” can be adjusted for the NTSC system only.

Notes• When you select a picture or sound mode, the adjusted settings will be

reset according to the selected mode.• You can also use SELECT and VOLUME +/– on the TV to adjust the

picture and sound settings.

Selecting the surround mode

1 Press SELECT repeatedlyuntil “SURROUND”appears.

2 Press + or – to select “ON”.

To turn off the surroundmode, select ”OFF”.

Customizing the picture and sound (continued)

SELECT

PICTURE 60

PICTURE COLOR BRIGHT HUE*

BALANCE TREBLE BASS SHARP

SURROUND: ON

SELECT

ON OFF

01GB05ADVTWN.p65 18/03/04, 09:2614

Black



Viewing yourfavorite channels

You can display six of your favoritechannels for quick and easy selection.You can program the favorite channelas well.

Selecting a favorite channel

1 Press FAVORITE.

2 Press the number buttonfrom 1 to 6 to select thedesired favorite channel.

When you use the “FAVORITE CH” featurefor the first time, six preset favorite channels will appear.

Programming the favorite channel

1 Press CH +/– or numberbuttons to select thechannel number you wantto program (e.g., programnumber 8).

2 Press SELECT until“FAVORITE CH SETUP”appears.

3 Press + or – to select thefavorite channel you want toprogram (e.g., 3).

4 Press SELECT.

The selected favorite channel (e.g., 3)turns red for about one second.

5 To program other favorite channels, repeat steps 1 to 4.

1 2 3

4 6

7 8 9

0

5

SOUNDMODE

FAVORITE

WAKE UP

SLEEP

JUMP ENT

CHVOL

SELECT

PIC MODE

FAVORITE

FAVO R I T E C H

1CH001 2CH002 3CH0034CH004 5CH005 6CH006

1 2 3

4 5 6

1

SELECT

FAVORITE CH SETUP :

FAVORITE CH SETUP : 3

SELECT

or

1 2 3

4 5 6

7 8

0-/--

9

CH8

Numberbuttons

ENT

CH +/–

FAVORITESELECT+ or –

01GB05ADVTWN.p65 18/03/04, 09:2615

Black

16 Advanced Operations


Blocking thechannels(CHILD LOCK)

You can lock some channel numbers toprevent children from watching certainchannels, by using the buttons on theremote control.

1 Select the channel number you want to lock.

2 Press SELECT until “CHILDLOCK” appears on thescreen.

3 Press + or – to select“ON”.

The symbol appears onthe screen.

To cancel, press + or – toselect “OFF”. The symbol disappears fromthe screen.

Note• If you preset a locked channel number automatically again, that particular

channel number will be unlocked.

CHILD LOCK: OFF

SELECT

TV

1 2 3

4 6

7 8 9

0

5

POWER

TV

DISPLAY

VIDEO

MUTING

MTS

SOUNDMODE

FAVORITE

WAKE UP

SLEEP

CABLEAUTO

PROGRAMADD/

ERASE

JUMP ENT

CHVOL

SELECT

PIC MODEPIC MODE

SELECT

+ or –

CHILD LOCK: ON

1

01GB05ADVTWN.p65 18/03/04, 09:2616

Black



Broadcasting On-screen display (Selected sound)

MTS stereo

1 2 3

4 6

7 8 9

0

5

POWER

TV

DISPLAY

VIDEO

MUTING

MTS

SOUNDMODE

FAVORITE

WAKE UP

SLEEP

JUMP ENT

CHVOL

SELECT

PIC MODE

STEREO MONOSAP

MTS

To

Listen to stereo broadcast sound.

Listen to SAP broadcast sound.

Listen to monaural sound.

STEREOMTS

CHANNEL

POWER


PROGRR

VIDEO 2 INPUT


Select

“STEREO”

“SAP”

“MONO”

Enjoying stereoor bilingualprograms

You can enjoy stereo sound or bilingualprograms of MTS stereo system.

Press MTS repeatedlyuntil you receive thesound you want.

The on-screen display changesto show the selected sound.The STEREO indicator on theTV lights up red whenreceiving any stereo program.

When receiving a MTS program

Notes• When select SAP, non-SAP program sound will be same as STEREO mode

sound.• When the signal is very weak, the SAP or STEREO broadcast sound may

become abnormal. To improve the sound, select “MONO”.

STEREOindicator

01GB05ADVTWN.p65 18/03/04, 09:2617

Black

18 Additional Information


Additional Information

Self-diagnosis function

Your TV is equipped with a self-diagnosis function. If there is aproblem with your TV, the STANDBY indicator flashes red. Thenumber of times the STANDBY indicator flashes indicates thepossible causes.

1 Check that the STANDBY indicator flashes red a number of times between3-second intervals.

2 Count the number of times the STANDBY indicator flashes.

3 Press POWER to turn off your TV.

4 Inform your nearest Sony service center about the number of times theSTANDBY indicator flashes.Be sure to note the model name and serial number located on the rear ofyour TV.

Front of TV

POWER

2L(MONO) R PROGRVOLUMEVIDEO INPUTSELECT AUTO

PROGR

STANDBY indicator

01GB06ADDTWN.p65 18/03/04, 09:2718

Black

19Additional Information


Snowy picture

Noisy sound

Distorted picture

Noisy sound

Good picture

Noisy sound

No picture

No sound

Troubleshooting

If you find any problem while viewing your TV, please check the following guide. Ifany problem persists, contact your Sony dealer .

Possible causeSymptom Solutions

• Check the antenna cable and connectionon the TV, VCR and on the wall.

• Preset the channel again.

• Check the antenna type (VHF/UHF).Contact a Sony dealer for advice.

• Adjust the antenna direction. Contact aSony dealer for advice.

• Try using a booster.

• Turn off or disconnect the booster if itis in use.

• If the sound of all the channels arenoisy, then press AUTO PROGRAM topreset the channels again.

• Check the power cord, antenna and theVCR connections.

• Press POWER on the remote.

• Press POWER on the TV to turn off theTV for about five seconds, then turn iton again.

• Connection is loose orthe cable is damaged.

• Channel presetting isinappropriate orincomplete.

• The antenna type isinappropriate.

• The antenna directionis inappropriate.

• Signal transmission islow.

• Broadcast signals aretoo strong.

• Channel presetting isinappropriate orincomplete.

• The power cord,antenna or VCR is notconnected.

• The TV is not turnedon.

continued

Page

4

9

_

–

–

–

8

4

11

10

Ad

ditio

nal In

form

atio

n

01GB06ADDTWN.p65 18/03/04, 09:2719

Black



Good picture

No sound

Dotted lines or stripes

Double images or

“ghosts”

No color

Abnormal color patches

TV cannot receive stereo

broadcast signal

Troubleshooting (continued)


• Press VOL + to increase thevolume level.

• Press MUTING to cancel themuting.

• Press MTS until a bettersound is heard.

• Do not use a hair dryer orother equipment near the TV.

• Adjust the antenna directionfor minimum interference.Contact a Sony dealer foradvice.

• Use a highly directionalantenna.

• Adjust the antenna direction.Contact a Sony dealer foradvice.

• Turn off or disconnect thebooster if it is in use.

• Press SELECT until“COLOR” appears on thescreen, then press + or – toadjust the color level.


• Keep external speakers orother electrical equipmentaway from the TV. Do notmove the TV while the TV isturned on. Press POWER onthe TV to turn off the TV forabout 15 minutes, then turn iton again.

• Press MTS until a good soundis heard.

• The volume level is too low.

• The sound is muted.

• Broadcast signal has atransmission problem.

• There is local interferencefrom cars, neon signs, hairdryers, power generators,etc.

• Broadcast signals arereflected by nearbymountains or buildings.

• The antenna direction isinappropriate.

• Use of a booster isinappropriate.

• The color level setting is toolow.


• The magnetic disturbancefrom external speakers orother equipment, or thedirection of the earth’smagnetic field may affectthe TV.

• The stereo reception settingis inappropriate.

Page

10

11

17

–

–

–

_

_

14

_

_

17

01GB06ADDTWN.p65 18/03/04, 09:2720

Black



Stereo broadcast sound

switches on and off or is

distorted.

or

The sound switches

between monaural and

stereo frequently.

The STANDBY indicator on

your TV flashes red a

number of times between

3-second intervals.

TV cabinet creaks.

A “boom” sound is heard

when the TV is turned on.


• Check the antenna cable andconnection on the TV, VCR andon the wall.


• Press MTS until a good soundis heard.

• Contact your nearest Sonyservice center.

—

—

• Connection is loose or thecable is damaged.


• Broadcast signal has atransmission problem.

• Your TV may need service.

• Changes in roomtemperature sometimesmake the TV cabinetexpand or contract,making a noise. This doesnot indicate a malfunction.

• The TV’s demagnetizingfunction is working. Thisdoes not indicate amalfunction.

Page

4

_

17

18

_

_

01GB06ADDTWN.p65 18/03/04, 09:2721

Black



Overview of controls

TV front panel

CHANNEL

POWER

STANDBY/STEREO/WAKE UPSELECT TV/VIDEO VOLUMEAUTO

PROGR

VIDEO 2 INPUT


PROGR

RVIDEO L (MONO) AUDIO

PageFunction

Preset channels automatically. 5Select channel number. 10Turn off completely or 10turn on the TV.Adjust volume. 10Standby indicator. 10Select TV or video input. 11Select the desired item. 11Wake up indicator. 12Stereo indicator. 17Headphone jack. –

AUTO PROGRCHANNEL +/–POWER

VOLUME +/–STANDBYTV/VIDEOSELECTWAKE UPSTEREOi

Button

01GB06ADDTWN.p65 18/03/04, 09:2822

Black



Remote Control

PageButton Function

TV

1 2 3

4 6

7 8 9

0

5

POWER

TV

DISPLAY

VIDEO

MUTING

MTS

SOUNDMODE

FAVORITE

WAKE UP

SLEEP

CABLEAUTO

PROGRAMADD/

ERASE

JUMP ENT

CHVOL

SELECT

PIC MODE

CABLEPOWER

AUTO PROGRAMCH +/–ADD/ERASE0-9ENTVOL +/–MUTINGTVVIDEOJUMPDISPLAYSELECT

+/–

Timer operationsWAKE UPSLEEP

PIC MODESOUND MODEFAVORITEStereo/bilingual operationsMTS

Select the cable TV. 5Turn off temporarily or turn 8on the TV.Preset channels automatically. 8Select channel number. 9Preset channels manually. 9Input numbers. 10Confirm input number. 10Adjust volume. 10Mute the sound. 11Display the TV program. 11Select TV or video input. 11Jump to previous channel number. 11Display on-screen information. 11Select the desired items. 11Adjust item. 11

Set TV to turn on automatically. 12Set TV to turn off automatically. 12Select picture mode. 13Select sound mode. 13Display favorite channels. 15

Select stereo/bilingual mode. 17

01GB06ADDTWN.p65 18/03/04, 09:2823

Black



Product name: Color TV

Model: KV-XA21N90

Input voltage: 110 V

Frequency: 60 Hz

Power consumption: 110 W

Production month: Indicated on the rear of the TV

Serial number: Indicated on the rear of the TV

Manufacturer country: Malaysia

Manufacturer: Sony EMCS (Malaysia) Sdn. Bhd.

Importer: Sony Electronics Marketing of Taiwan Ltd.

Address: 5F., No. 145, Changchun Road, Taipei 104, Taiwan

Contact number for service and inquiries: 449-9000

Specifications

Design and specifications are subject to change without notice.

Power requirements 110 V AC, 60 Hz

Power consumption (W) Indicated on the rear of the TV

Television system M

Color system NTSC3.58, PAL*, PAL 60*, SECAM*, NTSC 4.43* * AV IN only

Stereo/bilingual system MTS

Channel coverage VHF : 2 to 13UHF : 14 to 69CATV : 1 to 125

8 (Antenna) 75-ohm external terminal

Audio output 5W + 5W

Number of terminalVideo Input: 2 Output: 1 Phono jacks; 1 Vp-p, 75 ohms

Audio Input: 2 Output: 1 Phono jacks; 500 mVrms

i Output: 1 Stereo minijack

Picture tube 21 in.

Diagonal tube size 545 mm

Diagonal screen size 507 mm

Dimensions (w/h/d) 620 × 452 × 496 mm

Mass 26 kg

KV-XA21N90 Note

Sony Corporation

01GB06ADDTWN.p65 18/03/04, 09:2824

Black

Sony KV-XA21N90 (CT) GRP N7 _4-080-391-55 (1)

© 2001 Sony Corporation

KV-XA21

4-080-391-55 (1)

N90

使用說明書• 使用本電視機之前請先詳細閱讀此手冊﹐並妥善保存以備日後用作參考-

Trinitron Color TVCT

2


請勿放置任何物體於電視機上-

警告• 本電視機內存在危險性高電壓-

• 本電視機僅可在 110 V 交流電壓下操作-

請勿打開本電視機的機殼和後蓋﹐因電視機

內存在高電壓和危險性部件-須由合格的專業人

員對電視機進行檢修或棄置-

為防止火災或觸電﹐請勿使本電視機被雨淋或

受潮-

請勿堵塞本電視機的通風口-

請勿將本電視機放置於諸如書架或嵌入式壁櫥

等封閉之處-

請勿在同一電源插座上插入太多的電器-請勿

損壞電源線-

本電視機只適於家庭使用-請勿將本電視機放

置於任何交通工具內或多塵﹑高溫﹑潮濕或震動頻

繁之處-

為了兒童安全起見﹐請勿讓他們獨自逗留在電

視機旁-千萬別讓兒童攀爬本電視機-

若有任何液體流入或固體落入本電視機內時﹐請

勿操作本電視機-應立即請合格的專業人員檢查-

請用乾的軟布清潔本電視機-

請勿使用汽油﹑稀釋劑或任何其它化學品清潔

本電視機-請勿刮劃顯像管-

為了個人安全起見﹐雷雨期間﹐請勿觸摸電視

機的任何部份﹐包括電源線和天線電纜-

3

CT


目錄

使用您的新電視機

準備工作 ................................................... 4

步驟 1：連接天線 ....................................... 4

步驟 2：將電池裝入遙控器 ............................... 5

步驟 3：自動預設頻道 ................................... 5

連接選購的裝置 ............................................. 6

固定電視機 ................................................. 7

預設頻道 ................................................... 8

觀看電視 .................................................. 10


高級操作

調整圖像和音響 ............................................ 13

觀看喜愛頻道 .............................................. 15

使用“親子保護鎖定”功能 .................................. 16

欣賞立體聲或雙語言節目 .................................... 17

附加信息

自動檢測判斷功能 .......................................... 18

故障檢修 .................................................. 19

控制鍵總概況 .............................................. 22

規格 ...................................................... 封底

捏住插頭將電源線拔開-請勿直接拉拔電源

線-即使電視機已斷開電源﹐但只要電源線還在

插座內﹐它仍接通至交流電源-若想移動本電視機

或打算近期內不使用本電視機時﹐請將電源線斷

開-

警告（續）

放置電視機於穩定的﹑並足以支撐電視機重

量的電視支架及地面上-確保電視支架的表面平

整且表面積寬於電視機底面-

4



準備工作

步驟 1連接天線

若您想要連接錄影機﹐請參考以下“連接錄影機”接線圖-

連接錄影機

要觀看影音輸入時﹐按壓 VIDEO（影像）鍵（請參考第 11 頁）-


電視機背後

：信號流向

天線電纜（未提供）


F 插頭（未提供）


至天線輸出錄影機

至聲音和影像輸出

VIDEO －影像 (黃色)AUDIO-L (MONO) －聲音－左 (單音) (白色)AUDIO-R －聲音－右 (紅色)

聲音／影像電纜（未提供）

¶‹ VIDEO IN 1°]ºv µøÈ§J°^

電視機背後

VIDEO

VIDEO IN

VIDEO OUT

AUDIO

R L1

L(MONO)R

VIDEOIN

MONITOR OUT

AUDIO VIDEO

©Œ

至 8（天線）

：信號流向

5




AUTOPROGR

11 2 3

1

2

3

CABLE: ON

AUTO PROGRAM

SLEEP

CABLEAUTO

PROGRAMADD/

ERASE

PIC MODE

POWER

CHANNEL

POWER


PROGRR

VIDEO 2 INPUT


注• 當您使用電視機背後的 VIDEO IN 1（影音輸入）插孔或電視機前面的

VIDEO 2 INPUT（影音輸入）插孔時﹐您也可通過“多系統視訊入端子”接收 PAL, NTSC 和 SECAM 的影音信號-

• 若與單聲道錄影機相連接時﹐請將黃色插頭插至 VIDEO（影像）（黃色插孔）﹐而將黑色插頭插至 AUDIO-L(MONO)－聲音－左（單音）（白色插孔）-

• 當無信號輸入至已連接的影像裝置時﹐電視機的畫面即呈藍色-

注意

• 若未完成所有連接程序﹐請勿接通電源﹔否則極少量的電流可能經天線或其它端子外泄-

• 若打算近期內不使用遙控器﹐請將電池取出﹐以避免電池泄漏而損壞遙控器-

若您不小心觸及電池所泄漏的液體﹐應立即用水洗淨-

步驟 2將電池裝入遙控器

注

• 請勿使用舊電池﹐也不要同時使用不同類型的電池-

®B J 3自動預設頻道

提示

• 若您要停止自動頻道預設﹐請按壓 SELECT（功能選擇）鍵-

• 若您的電視已預設一個不想要的頻道或不能預設某一個頻道﹐您就必須手動預設該頻道（參考第 9 頁）-

• 遙控器上的 AUTO PROGRAM （自動頻道記憶）鍵可當作電視機上的AUTO PROGR（自動頻道記憶）鍵-

有線電視：開

自動頻道記憶

電視機前面

6



連接選購的裝置

本電視機可與錄影機﹑影碟機﹑攝影機﹑電視遊戲機或立體聲音響等選購的影像／聲音裝置相連接-

要觀看所連接裝置的影音輸入時﹐按壓 VIDEO（影音）鍵（請參考第 11 頁）-

用影音輸入插孔與攝影機／電視遊戲裝置相連接

注

• 當您使用電視機背後的 VIDEO IN 1（影音輸入）插孔或 VIDEO 2 INPUT（影音輸入）插孔時﹐您也可通過“多系統視訊入端子”接收 PAL, NTSC和 SECAM 的影音信號-

• 您也可將影像裝置連接至本電視機背後的 VIDEO IN 1（影音輸入）插孔-

用監視器輸出插孔與影像／聲音裝置相連接

電視機前面

至 VIDEO 2 INPUT(影音輸入)

攝影機

或


至聲音和影像輸出

電視遊戲機

： H y¶V


電視機背後

至MONITOROUT(監視器輸出)

錄影機至天線輸出

音響系統

或

至聲音和影像輸入

：信號流向

至聲音輸入


L(MONO)R

VIDEOIN

MONITOR OUT

AUDIO VIDEO

1

VIDEO －影像 (黃色)AUDIO-L (MONO) 聲音－左 (單音) (白色)AUDIO-R －聲音－右 (紅色)

R

VIDEO 2 INPUT


CHANNEL

POWER


PROGRR

VIDEO 2 INPUT


注

• 若與單聲道錄影機相連接時﹐請將黃色插頭插至 VIDEO（影像）（黃色插孔）﹐而將黑色插頭插至 AUDIO-L（MONO）－聲音－左（單音）（白色插孔）-

7




固定電視機

為防止電視機摔落﹐請採用下述方法之一將電視機固定-

A 將固定用的帶條﹐用所提供的螺釘按帶條上的孔安裝在電視機背後和其支架上-

或

B 用一根繩索或鏈條穿過夾子將電視機固定在牆上或柱子上-

注

• 請僅使用提供的螺釘-使用其它螺釘可能會損壞本電視機-

A B

3.8 毫米

20毫米

或

8



預設頻道

您可用遙控器或電視機上的按鍵預設有線電視頻道﹐VHF 或 UHF 的廣播頻道-

TV

1 2 3

4 6

7 8 9

0

5

POWER

TV

DISPLAY

VIDEO

MUTING

MTS

SOUNDMODE

FAVORITE

WAKE UP

SLEEP

CABLEAUTO

PROGRAMADD/

ERASE

JUMP ENT

CHVOL

SELECT

PIC MODE

AUTO PROGRAM(自動頻道記憶)

自動預設頻道

1 按壓電視機上的 POWER（電源）鍵以接通電視機電源-

2 按壓 CABLE（有線電視）鍵以選擇“有線電視：開”-

3 按壓 AUTO PROGRAM(自動頻道記憶) 鍵-

注

• 若您選擇“有線電視：開”﹐您將會接收到 125 個有線電視頻道-

若沒有有線電視頻道﹐您將會接收到 VHF 的廣播頻道而已-

• 若您選擇“有線電視：關”﹐您將會接收到 68 個 VHF 或 UHF 的廣播頻道而已-

CABLE(有線電視)

AUTOPROGR

POWER

CHANNEL

POWER

STANDBY/

STEREO/

WAKE UPSELECT VIDEO INPUT VOLUMEAUTO

PROGRR

VIDEO 2 INPUT


AUTOPROGRAM

1 2 3

CABLE

POWER

9




手動預設頻道

要接收某一個新的頻道或接收一個信號微弱的頻道時﹐請手動預設頻道-

1 按壓數字鍵以選擇您所要的頻道號碼﹐然後按壓 ENT 鍵-

2 按壓 ADD/ERASE（記憶／刪除）鍵-

“+”顯示於頻道號碼旁邊﹐這表示頻道預設已完成-

解除頻道號碼

解除了不用或不要的頻道號碼後﹐當按壓 CH +/–（頻道）鍵時﹐您就可跳躍那些頻道號碼-

1 按壓 CH +/–（頻道）鍵直到不用或不要的頻道號碼顯示於畫面上-

2 按壓 ADD/ERASE（記憶／刪除）鍵-

“–”顯示於頻道號碼旁邊﹐這表示頻道號碼已被解除-

要取消跳躍頻道號碼設定時

再次預設頻道-

+25ADD/

ERASE

ENT

CH +/– (頻道)

TV

1 2 3

4 6

7 8 9

0

5

SOUNDMODE

FAVORITE

WAKE UP

SLEEP

CABLEAUTO

PROGRAMADD/

ERASE

JUMP ENT

CHVOL

SELECT

PIC MODE

ADD/ERASE –25

ADD/ERASE(記憶／刪除)

數字鍵

10



觀看電視

本節說明觀看電視時所使用的功能-

大多數功能都可用遙控器操作-

1 按壓電視機上的 POWER（電源）鍵-

當電視機處於待機狀態時（電視機上的 STANDBY （待機）指示燈已發出紅色亮光）﹐按壓遙控器上的 POWER（電源）鍵或電視機上的 CHANNEL +/–（頻道）鍵-

2 要選擇頻道號碼時﹐按壓數字鍵後再按壓 ENT 鍵﹐或直接按壓 CH +/–°]¿W D°^鍵-

3 按壓 VOL +/–（音量）鍵以調整音量-

VOL +/– (音量)

數字鍵

ENT

©Œ

1 2 3

4 5 6

7 8

0

9

CH

ENT

ENT

VOL

MUTING (靜音)DISPLAY (顯示)

POWER (電源)VIDEO (影音)

CH +/– (頻道)

SELECT (功能選擇)

WAKE UP (開機定時)

SLEEP (睡眠定時)

+ 或 –

CHANNEL

POWER


PROGRR

VIDEO 2 INPUT


CHANNELSELECT TV/VIDEO VOLUMEAUTOPROGR

POWER

TV

1 2 3

4 6

7 8 9

0

5

POWER

TV

DISPLAY

VIDEO

MUTING

MTS

SOUNDMODE

FAVORITE

WAKE UP

SLEEP

CABLEAUTO

PROGRAMADD/

ERASE

JUMP ENT

CHVOL

SELECT

PIC MODE

POWER

TV (電視)

JUMP

STANDBY/WAKE UP/(待機／開機定時)指示燈

11




附加操作

要

暫時切斷電視機的電源

完全切斷電視機的電源

消除聲音

觀看影音輸入（錄影機﹑攝影機等）

更換彩色系統設定（僅於影音輸入插孔）

跳回到之前收看的頻道號碼

顯示畫面上的信息*

* 畫面上即顯示圖像﹑聲音﹐以及頻道號碼或影音輸入的信息-畫面上的圖像和聲音信息在顯示大約三秒後即消失-

改變畫面顯示語言

1 按壓 SELECT（功能選擇）鍵直到“語文顯示／LANGUAGE：中文”顯示於畫面上-

2 按壓 + 或 – 鍵以選擇“ENGLISH”-

��

• �� !"#$%&'=pbib`q�� !��=slirjb=H/–��

�� !"#$%-

操作如下

按壓遙控器上的 POWER（電源）鍵-電視機上的STANDBY（待機）指示燈即發出紅色亮光-

按壓電視機上的 POWER（電源）鍵-

按壓=MUTING（靜音）鍵-

按壓=VIDEO�影音）鍵以選擇“影音輸入 1”或“影音輸入 2”-

要回到電視節目時﹐按壓= TV（電視）鍵即可-

重復按壓 SELECT（功能選擇）鍵直到“彩色系統”顯示於畫面上﹐然後按壓= + =或= – 鍵以選擇適當的彩色系統直到顏色被改善至最理想的狀態-

�壓 JUMP 鍵-

按壓 DISPLAY（顯示）鍵-

SELECT

續

NTSC3.58 NTSC4.43PAL SECAM

12



設定開機定時器

1 按壓 WAKE UP（開機定時）鍵直到您所指定的時間顯示於畫面上-

一旦時間被設定﹐開機定時器立即啟動-

2 請選擇當您醒來時所要觀看的頻道號碼或影音輸入-

3 若您要電視機自動切斷電源﹐請按壓 POWER (電源) 鍵或設定睡眠定時功能-

電視機上的 WAKE UP（開機定時）指示燈發出橙色亮光-

要取消開機定時器時

按壓開機定時鍵直到“開機定時：關”顯示於畫面上﹐或切斷電視機電源-

注

• 用開機定時器接通電視機電源並超過兩小時後﹐若您不按壓電視機或遙控器上的任何一個按鍵或控制鍵﹐則電視機再進入待機狀態-要繼續觀看電視時﹐按壓電視機或遙控器上的任何一個按鍵或控制鍵即可-

設定睡眠定時器

按壓 SLEEP（睡眠定時）鍵直到您所指定的時間顯示於畫面上-

一旦時間被設定﹐睡眠定時器立即啟動-

要取消睡眠定時器時

按壓睡眠定時鍵直到“睡眠定時：關”顯示於畫面上﹐或切斷電視機電源-

觀看電視（續）

WAKE UP

SLEEP

13


高級操作

高級操作

調整圖像和音響

您可選擇畫質和音效模式或調整其設定來獲得最適圖像和音響-

您可選擇環繞音效模式以改變音響效果-

選擇畫質和音效模式

要選擇畫質模式

重復按壓 PIC MODE（畫質模式）鍵直到您所要的畫質模式顯示於畫面上-

選擇以

“動態” 觀看高對比圖像-

“標準” 觀看普通對比圖像-

“柔和” 觀看柔和圖像-

要選擇音效模式

重復按壓 SOUND MODE（音效模式）鍵直到您所要的音效模式顯示於畫面上-

選擇以

“動態” 收聽強調低和高音調的動態及清晰音響-

“戲劇” 收聽強調說話的聲音及背景音樂-

“柔和” 收聽柔和聲音-

SELECT（功能選擇）

SOUND MODE（音效模式）

+ 或 –PIC MODE（畫質模式）

續

TV

SOUNDMODE

FAVORITE

WAKE UP

SLEEP

CABLEAUTO

PROGRAMADD/

ERASE

CHVOL

SELECT

PIC MODE

PIC MODE

99 9

SOUNDMODE

高級操作

14


高級操作

調整圖像和聲音設定

1 按壓 SELECT（功能選擇）鍵直到您所要調整的設定顯示於畫面上-

每次您按壓 SELECT （功能選擇）鍵﹐設定項目將會如圖所示改變：

2 按壓 + 或 – 鍵以調整所選擇的項目-

3 要調整其它項目時﹐重復第 1 和第 2 步驟-

* 只有當彩色系統為 NTSC 時﹐您才能調整“色相”設定-

注

• 當您選擇畫質和音效模式時﹐已被調整的設定將隨被選的模式而改變-

• 您也可使用電視機上的 SELECT（功能選擇）鍵和 VOLUME +/–（音量）鍵來調整圖像和聲音設定-

選擇環繞音效模式

1 重復按壓 SELECT 鍵直到“環繞音效”顯示於屏幕上-

2 按壓 + 或 – 鍵以選擇“開”-

要取消環繞聲模式時﹐選擇“關”-

調整圖像和音響 ( 續）

SELECT

SELECT

60

15


高級操作

選擇喜愛頻道

1 按壓 FAVORITE（喜愛頻道）鍵-

2 按壓 1 至 6 的數字鍵以選擇您所要的喜愛頻道-

若您第一次使用“喜愛頻道”功能﹐六個已被預設的喜愛頻道將顯示於屏幕上-

輸入喜愛頻道

1 按壓 CH +/–（頻道）或數字鍵以選擇您所要輸入的頻道號碼（例如﹐頻道號碼

8）-

2 按壓 SELECT（功能選擇）鍵直到“喜愛頻道”顯示於屏幕上-

3 按壓 + 或 – 鍵以選擇您所要輸入的喜愛頻道（例如﹐3）-

4 按壓 SELECT（功能選擇）鍵-

所選擇的喜愛頻道（例如﹐3）即呈紅色約一秒-

5 要輸入其他喜愛頻道時﹐重復第 1 至第 4 步驟-

觀看喜愛頻道

您可簡易快速的在電視屏幕上顯示和選擇六個喜愛頻道-您也可輸入喜愛頻道-

數字鍵

CH +/–（頻道）

+ 或 –

或

FAVORITE（喜愛頻道）

8

SELECT

1 2 3

4 6

7 8 9

0

5

SOUNDMODE

FAVORITE

WAKE UP

SLEEP

JUMP ENT

CHVOL

SELECT

PIC MODE

1 2 3

4 5 6

FAVORITE

1

SELECT

1 2 3

4 5 6

7 8

0-/--

9

CH

ENT


16


高級操作

使用“親子保護鎖定”功能

您可用遙控器上的按鍵鎖定頻道號碼以避免小孩觀看某些電視頻道-

1 選擇您所要鎖定的頻道號碼-

2 按壓 SELECT（功能選擇）鍵直到“親子保護鎖定”顯示於畫面上-

3 按壓 + 或 – 鍵以選擇“開”-

親子保護鎖定符號（）顯示於畫面上-

要取消時﹐按壓 + 或 – 鍵以選擇“關”-親子保護鎖定符號（）將消失於畫面上-

注

• 若您自動預設任何一個鎖定頻道號碼﹐此頻道號碼將自動解鎖-


+ 或 –

TV

1 2 3

4 6

7 8 9

0

5

POWER

TV

DISPLAY

VIDEO

MUTING

MTS

SOUNDMODE

FAVORITE

WAKE UP

SLEEP

CABLEAUTO

PROGRAMADD/

ERASE

JUMP ENT

CHVOL

SELECT

PIC MODEPIC MODE

SELECT

1

17


高級操作

欣賞立體聲或雙語言節目

您可欣賞音聲多重的立體聲音響或雙語言節目-

重復按壓 MTS（音聲多重）鍵至接收到您想收聽的聲音-

畫面顯示會變化以顯示所選擇的聲音-

當接收到任何立體聲節目時﹐電視機上的 STEREO（立體聲）指示燈發出紅色亮光-

當接收到 MTS 立體聲節目時

MTS（音聲多重）

選擇

立體聲

副語音

單聲道

以

收聽立體聲-

收聽雙語言節目-

接收單聲道的聲音-

注

• 當選擇“副語音”時﹐非副語音節目的聲音將會與立體聲相似-

• 當信號微弱時﹐“副語音”或“立體聲”的聲音可能會不正常-要改善聲音﹐選擇“單聲道”-

1 2 3

4 6

7 8 9

0

5

POWER

TV

DISPLAY

VIDEO

MUTING

MTS

SOUNDMODE

FAVORITE

WAKE UP

SLEEP

JUMP ENT

CHVOL

SELECT

PIC MODE

MTS

STEREO（立體聲）指示燈

CHANNEL

POWER


PROGRR

VIDEO 2 INPUT


播送畫面顯示（所選擇的聲音）

MTS 立體聲

18


附加信息

自動檢測判斷功能

您的電視機設有自動檢測判斷功能-如果您的電視機發生任何故障﹐STANDBY（待機）指示燈將會發出紅色亮光-STANDBY（待機）指示燈所發出的亮光次數將表明可能存在的原因-

1 檢查 STANDBY (待機) 指示燈所發出的紅色亮光是否相隔三秒-

2 計算 STANDBY (待機) 指示燈的亮光次數-

3 按壓 POWER (電源) 鍵以切斷電視機的電源-

4 通知您鄰近的 Sony 經銷商有關於 STANDBY (待機) 指示燈所發出的亮光次數-

確定您將電視機背後所注明的機型和機身號記錄下來-

電視機前面

附加信息

POWER


PROGR

STANDBY（待機）指示燈

19


附加信息

圖像有雪花狀斑點

有噪聲

圖像失真

有噪聲

圖像良好

有噪聲

沒有圖像

沒有聲音

故障檢修

若在觀看電視時面對任何問題﹐請參考下列故障檢修指南-若問題仍然存在﹐請聯絡 Sony 經銷商-

癥狀

續

•檢查天線電纜以及電視機﹐錄影機和牆上的天線連接是否正確-

•再次預設頻道-

•檢查天線類型 (VHF/UHF)-請尋求Sony 經銷商的協助-

•調整天線方向-請尋求 Sony 經銷商的協助-

•嘗試使用信號增強器-

•切斷信號增強器的電源或拔掉其插頭-

•若所有的頻道聲音都吵雜﹐按壓AUTO PROGRAM（自動頻道記憶）鍵以再次預設頻道-

•檢查電源線﹐天線和錄影機之連接是否正確-

•按壓遙控器上的 POWER（電源）鍵-

•按壓電視機上的 POWER（電源）鍵以切斷電視機的電源﹐五秒左右後再次接通電源-

•連接已鬆脫或電纜已損壞-

•頻道預設不適當或不完整-

•天線類型不合適-

•天線定位方向不正確-

•傳送信號微弱-

•廣播信號太強-

•頻道預設不適當或不完整-

•電源線﹐天線或錄影機沒有被連接-

•電視機電源沒有被接通-

4

9

—

—

—

—

8

4

1110

可能因素解決方法頁面

附加信息

20


附加信息

圖像良好

沒有聲音

圖像有點線或條紋

圖像出現雙重影像或

“鬼影”

圖像無彩色

圖像出現反常彩色斑點

電視機無法接收立體聲

廣播信號

•按壓 VOL +（音量）鍵以提高音量水平-

•按壓 MUTING（靜音）鍵以取消消音-

•按壓 MTS（音聲多重）鍵直到聲音正常為止-

•不要在電視機旁使用吹風機或其它電器-

•調整天線方向以減低干擾-請尋求Sony 經銷商的協助-

•使用高定向天線-


•切斷信號增強器的電源或拔掉其插頭-

•按壓 SELECT（功能選擇）鍵直到“彩色”顯示於畫面上﹐然後按壓 +或 – 鍵以調整顏色濃度-


•將電視機放置在離外部揚聲器或其它電器較遠的地方-請別移動已被接通電源的電視機-按壓電視機上的POWER（電源）鍵以切斷電視機電源-約 15分鐘後﹐再接通電視機電源-


故障檢修（續）

•音量水平太低-

•聲音被消除-

•廣播信號有傳送故障-

•受周圍環境（如汽車﹑霓虹燈﹑吹風機﹑發電機等）影響-

•廣播信號受周圍高山或大廈干擾-


•信號增強器使用不適當-

•彩色水平設定太低-


•受外部揚聲器或其它電器電磁性的影響﹐或受地球磁場方向的影響-

•立體聲接收設定不適當-

10

11

17

—

—

—

—

—

14

—

—

17

癥狀可能因素解決方法頁面

21


附加信息

癥狀頁面

立體聲廣播聲音開關

失常或聲音失真-

或

立體聲和單聲道之間

的聲音頻繁切換-

電視機上的 STANDBY

(待機) 指示燈每隔三秒

閃爍至少一次的紅色亮

光-

電視機外殼吱嘎聲-

當您接通電視機時聽到

「」的聲音-

•連接已鬆脫或電纜已損壞-


•廣播信號有傳送故障-

•您的電視機可能需要修理-

•室溫的變化有時會導致電視機的外殼膨脹或縮小﹐因而產生噪聲-這並不表示發生故障-

•電視機自動消磁-這並不表示發生故障-

4

—

17

18

—

—

可能因素解決方法

•檢查天線電纜以及電視機﹐錄影機和牆上的天線連接是否正確-



•請尋求 Sony 經銷商的協助-

—

—

22


附加信息

AUTO PROGR（自動頻道記憶）

CHANNEL +/–（頻道）

POWER（電源）

VOLUME +/–（音量）

STANDBY（待機）

TV/VIDEO（電視／影音）


WAKE UP（開機定時）

STEREO（立體聲）

i

控制鍵總概況

電視機前面的控制板

按鍵功能頁面

5

10

10

10

10

11

11

12

17

—

CHANNEL

POWER

STANDBY/STEREO/WAKE UPSELECT TV/VIDEO VOLUMEAUTO

PROGR

VIDEO 2 INPUT


PROGR

RVIDEO L (MONO) AUDIO

自動預設頻道-

選擇頻道號碼-

接通或完全切斷電視機電源-

調整音量-

待機指示燈-

選擇電視或影音輸入-

選擇所要的項目-

開機定時指示燈-

立體聲指示燈-

耳機插孔-

23


附加信息

遙控器

頁面功能按鍵

TV

1 2 3

4 6

7 8 9

0

5

POWER

TV

DISPLAY

VIDEO

MUTING

MTS

SOUNDMODE

FAVORITE

WAKE UP

SLEEP

CABLEAUTO

PROGRAMADD/

ERASE

JUMP ENT

CHVOL

SELECT

PIC MODE

收看有線電視節目-

接通或暫時切斷電視機電源-

自動預設頻道-

選擇頻道號碼-

手動預設頻道-

輸入號碼-

確認所輸入的號碼-

調整音量-

消除聲音-

顯示電視節目-

選擇電視或影音輸入-

跳回到之前收看的頻道號碼-

顯示畫面上的信息-

選擇所要的項目-

調整所選的項目-

設定電視自動打開-

設定電視自動關閉-

選擇畫質模式-

選擇音效模式-

顯示喜愛頻道-

選擇立體聲或雙語言模式-

5

8

8

9

9

10

10

10

11

11

11

11

11

11

11

12

12

13

13

15

17

CABLE (有線電視)

POWER (電源)

AUTO PROGRAM(自動頻道記憶)

CH +/– (頻道)

ADD/ERASE(記憶／刪除)

0 – 9

ENT

VOL +/– (音量)

MUTING (靜音)

TV (電視)

VIDEO (影音)

JUMP

DISPLAY (顯示)

SELECT(功能選擇)

+/–

定時器設定WAKE UP(開機定時)

SLEEP(睡眠定時)

PIC MODE(畫質模式)

SOUND MODE(音效模式)

FAVORITE(喜愛頻道）

立體聲或雙語言操作MTS (音聲多重)

24


附加信息

產品名稱 : 彩色電視機

型號 : KV-XA21N90額定電壓 : 110 V額定頻率 : 60 Hz消耗功率 : 110 W製造日期 : 如機體上標示

機器號碼 : 如機體上標示

產地 : 馬來西亞

製造廠商 : Sony EMCS (Malaysia) Sdn. Bhd.進口商 : 新力索尼股份有限公司

地址 : 台北巿長春路 145 號 5 樓服務洽詢專線: 449-9000

規格

本機設計和規格若有任何更改﹐恕不另行通知-

KV-XA21N90 注

電源 110 V 交流電﹐60 Hz電力消耗（W）標示於電視機後

電視系統 M彩色系統 NTSC3.58, PAL*, PAL 60*, SECAM*, NTSC 4.43* *僅於影音輸入立體聲／雙語言系統 MTS頻道範圍 VHF : 2 至 13

UHF: 14 至 69CATV : 1 至 125

8（天線） 75 歐姆外部端子聲音輸出 5W + 5W插孔數量

VIDEO (影像) 輸入：2 輸出：1Phono 型插孔﹔1 Vp-p, 75 歐姆

AUDIO (聲音) 輸入：2 輸出：1Phono 型插孔﹔500 mVrms

i（耳機）輸出：1 立體聲微型插孔

顯像管 21 in.顯像管對角線尺寸 545 mm可見畫面對角線尺寸 507 mm

外形尺寸（寬 × 高 × 深） 620 × 452 × 496 mm重量 26 kg

Sony Corporation

Trinitron Color TV - Sony

Documents

Transcript of Trinitron Color TV - Sony