Trimec® Product Brochure - AWS

ASSA ABLOY, the global leader in door opening solutions

ASSA ABLOY, the global leader in door opening solutions

Trimec® Product Brochure

ASSA ABLOY, the global leader in door opening solutions2

Trimec®

Trimec®, ASSA ABLOY Australia’s leading brand for electronic and electromechanical door securitysolutions, has an undisputed global reputation as a manufacturer of premium quality, reliable security products due to high precision manufacturing in state of the art facilities in Sydney, continued investments in product innovation and stringent processes for quality control.

Trimec® specialises in electric strikes but also boasts an impressive range of patented electromechanical technologies including drop bolts and V locks. Trimec products are tested to very high standards - a testament to the superior quality, reliability and lifecycle cost compared to similar, cheaper models.

In the UK, Trimec® is now a product range name within the UNION brand.

Trimec® customers have access to ASSA ABLOY’sexcellent customer service capability and expertisein the UK underpinned by the TRICARE® scheme.

ASSA ABLOY in brief

ASSA ABLOY is the global leader in door openingsolutions, dedicated to satisfying end-user needsfor security, safety and convenience. ASSA ABLOY isrepresented in all major regions, on both matureand emerging markets, with leading positions inAustralia and much of Europe and North America.In the rapidly growing electromechanical securitysector, the Group has a leading position in fieldssuch as electromechanical products, access control,identification technology, automatic doors andhotel security.

Trimec

Trimec, ASSA ABLOY Australia’s leading brand forelectronic and electromechanical door securitysolutions, has an undisputed global reputation as amanufacturer of premium quality, reliable securityproducts due to high precision manufacturing instate of the art facilities in Sydney, continuedinvestments in product innovation and stringentprocesses for quality control.

Trimec specialises in electric strikes but also boastsan impressive range of patented electromechanicaltechnologies including drop bolts and V locks.Trimec products are tested to very high standards -a testament to the superior quality, reliability andlifecycle cost compared to similar, cheaper models.

In the UK, the Trimec portfolio of products are soldand warranted through Adams Rite alongsidefellow ASSA ABLOY Group company brands from its Head Office in Willenhall.

Trimec customers have access to ASSA ABLOY’sexcellent customer service capability and expertisein the UK underpinned by the TRICARE scheme.

2

Contents

ASSA ABLOY, the global leader in door opening solutions 3

Electric Strikes

EL110 Electric Cabinet Lock 4

ES100 Series Electric Strike 6


ES150 Surface Mounted Electric Strike 12

ES200 Series Non Monitored Electric Strike 14

ES2000 Series Monitored Electric Strike 16





ES9000 Pre-Load Strike 26

Electromechanical Bolts

TB25 Drop Bolt 28

TB25KO Drop Bolt 30

TB38 Drop Bolt 32

ES6000 Hook Lock 34

ES8000 V-Lock 36 36

Warranty 38

Warranty 28

EL110 Electric Cabinet Lock


General Description

The EL110 electric cabinet lock is a compact,cast aluminium lock specially designed forcabinets having either swing or sliding doors.The cabinet lock can be surface mounted eithervertically or horizontally and offers maximumflexibility for ease of installation.

EL110 can also be controlled by any existingaccess control system or simply controlledthrough a remote keypad or keyswitch. TheEL110 is cost efficient, robust, easy to install andsuitable for one or multiple cabinet applications.

Key Features

• Fail safe/fail secure changeable on site

• Flexible alignment: has a 5mm XY adjustment after installation

• Low current consumption: uses only 187mA @ 12Vdc

• Available in 12 or 24Vdc

• Self latching in fail secure mode

• Solenoid rated for continuous use

• 5 Year Warranty Applications

• Cabinet locking

• Swing or sliding cabinet doors

Standards and Compliance

CE Approved

4

EL110 Electric Cabinet LockEL110 Electric Cabinet Lock

General Description

The EL110 electric cabinet lock is a compact,cast aluminium lock specially designed forcabinets having either swing or sliding doors.The cabinet lock can be surface mounted eithervertically or horizontally and offers maximumflexibility for ease of installation.

EL110 can also be controlled by any existingaccess control system or simply controlledthrough a remote keypad or keyswitch. TheEL110 is cost efficient, robust, easy to install andsuitable for one or multiple cabinet applications.

Key Features


• Flexible alignment: has a 5mm XY adjustmentafter installation

• Low current consumption: uses only 187mA @ 12Vdc


• Self latching in fail secure mode


• 5 Year Warranty

Applications

• Cabinet locking

• Swing or sliding cabinet doors

Standards and ComplianceCE Approved



EL110 Technical Information

Voltage 12 or 24Vdc

Current 187 mA @ 12Vdc, 87mA @ 24Vdc

Solenoid Solenoids are rated for continuous use.

Monitoring None

Strength Holding force 150kg

Endurance Cycle tested to 1,000,000 operations

Environment Operational temperature range -20°C to + 60°C

Body Cast Aluminium Construction

5


SKU Short Code Description

111301-000 TRIMEC EL111-T 12V PTL

111304-000 TRIMEC EL114-T 24V PTO

Specification StatementThe strike which is to be surface mounted andconstructed of cast aluminium, should be selflatching when used in fail secure mode. Thelock must be capable of being changed from failsafe to fail secure on site. Lock alignment mustbe adjustable up to 5mm in both “x” and “y”directions both during and after installation.The lock should consume not greater than187mA @12Vdc or 87mA @ 24Vdc and have asolenoid rated for continuous use. Electricalcertifications must include CE.

Ordering Information

Lock and Strike Dimensions

18

39.9

31

R4

4.5mm Horizontal Adjustment

22.5

5mm SlidingVertical Adjustment

55

13.5

21.5

30

72.7

28

Front Engagement

37 To prevent over- or under-travel, set distance between back mounting face of lock and striker to 37mm.

Striker

Lock

Side Engagement

11

To prevent over- or under-travel, set distance between back mounting face of striker and centre of nearest fixing hole of lock to 11mm.

Lock

Striker

EL110 Technical InformationVoltage 12 or 24Vdc

Current 187 mA @ 12Vdc, 87mA @ 24Vdc


Monitoring None

Strength Holding force 150kg




Specification Statement

The strike which is to be surface mounted and constructed of cast aluminium, should be self latching when used in fail secure mode. The lock must be capable of being changed from fail safe to fail secure on site. Lock alignment must be adjustable up to 5mm in both “x” and “y” directions both during and after installation. The lock should consume not greater than 187mA @12Vdc or 87mA @ 24Vdc and have asolenoid rated for continuous use. Electrical certifications must include CE.



111301-000 ] EL111-T 12V PTL

111304-000 TRIMEC EL114-T 24V PTO

ES100 Electric Strike


Eximo® Panic and Emergency Exit Device Range

6

ES100 Series Electric Strike

General Description

The ES100 is a cost efficient robust electric strikewith a solid construction of one-piece castaluminium body and stainless steel striker. TheES100 offers the same level of security andreliability usually provided by more expensiveelectric locking solutions.

Extension lips are available to accommodate theinstallation of electric strikes on door frameswith different thickness. The ES100 productrange of patented electric strikes are suitable foruse with all access control installations whereflexibility, security and lower cost are required.

Key Features


• Stainless steel striker for extra strength and durability

• Stainless steel locking pins


•Optional mounting kit

• Installation template

• IP56 weather resistant model as standard

• Suitable For 15mm latch with a 3mm door gap

• 5 Year Warranty

Applications

• Exposed areas

• High traffic areas

•Open in/open out doors

• Suitable for use with all access control systems

Standards and ComplianceApproved to UL1034 (highest level)

CE Approved

General Description

The ES100 is a cost efficient robust electric strike with a solid construction of one-piece castaluminium body and stainless steel striker.The ES100 offers the same level of security andreliability usually provided by more expensiveelectric locking solutions.


Key Features





• Optional mounting kit




• 5 Year Warranty

Applications

• Exposed areas


• Open in/open out doors



Approved to UL1034 (highest level)

CE Approved



ES100 Technical Information

Voltage 12 or 24Vdc

Current 243 mA @ 12Vdc – 187mA @ 24Vdc


Monitoring None

Holding Force 680 kg Static Strength Rating



Weather resistant construction available. (IP56)


Keeper Stainless Steel

Latch Suit 15mm latch bolt with 3mm door gap



110101-030 TRIMEC ES101-00-WR-TABS 12V PTL WR SS f/plate no lip

110101-070 TRIMEC ES101-WR-TABS 12V PTL WR SS f/plate


220200-518 TRIMEC Mounting Kit - ES100/110 Mounting tab kit for ES100/110

Extension Lips

220110-502 TRIMEC ES110 15MM Extension lip



Faceplates

210100-523 TRIMEC PL-ES1-TJAA ES110 Long rebated faceplate aluminium

210100-527 TRIMEC PL-ES1-TGAS ES110 UK sash DIN RH (LH) SS

210100-528 TRIMEC PL-ES1-TFAS ES110 UK sash DIN LH (RH) SS

210100-530 TRIMEC PL-ES1-TBBS ES110 ANSI long SS

219100-532 TRIMEC ES100 UK Sash SS Small Right ES110 Small sash DIN RH (LH) SS

219100-534 TRIMEC ES100 UK Sash SS Small Left ES110 Small sash DIN LH (RH) SS

219100-538 TRIMEC PL-ES1-TDAS RH ES110 Euro sash DIN LH (RH) SS

219100-539 TRIMEC PL-ES1-TEAS LH ES110 Euro sash DIN RH (LH) SS


Where Power to Lock and Power to Open functions may be required in the same building, the strike must be interchangeable from either “Power to Lock” or “Power to Open” on site. The electric strike should not consume current greater than 243mA @ 12Vdc or 187mA @ 24Vdc and have a solenoid suitable for continuous use. Certifications must include CE. The strike should have a minimum holding force of 680kg, and an endurance rating of 1 million cycles.

7


86m

m

123.

7mm

32mmm

43mm

32mm

123.

7mm

86m

m

43mm

123.

7mm

86m

m

32mm

43mm

50mm25mm15mm

30mm16mm16mm16m

ES100 with 15mm ext lip- “A” Plate



PageSKU Short Code Description





Extension Lips




Faceplates










Specification StatementWhere Power to Lock and Power to Openfunctions may be required in the same building,the strike must be interchangeable from either“Power to Lock” or “Power to Open” on site.

The electric strike should not consume currentgreater than 243mA @ 12Vdc or 187mA @24Vdc and have a solenoid suitable forcontinuous use. Certifications must include CE.

The strike should have a minimum holdingforce of 680kg, and an endurance rating of 1 million cycles.

ES100 Technical InformationVoltage

Current

Solenoid

Monitoring

Holding Force

Endurance

Environment

Body

Keeper

Latch

12 or 24Vdc

243 mA @ 12Vdc – 187mA @ 24Vdc

Solenoids are rated for continuous use.

None

680 kg Static Strength Rating

Cycle tested to 1,000,000 operations

Operational temperature range -20°C to + 60°CWeather resistant construction available. (IP56)

Cast Aluminium Construction

Stainless Steel

Suit 15mm latch bolt with 3mm door gap



General Description

The ES110 is a cost efficient robust electric strikewith a solid construction of one-piece castaluminium body and stainless steel striker.Having a deeper than normal strike-keeper area,ES110 is designed to work with an extensiverange of locks and offers the same level ofsecurity and reliability usually provided by moreexpensive electric locking solutions.


Key Features









• 5 Year Warranty

Applications

• Exposed areas






CE Approved

8


General Description

The ES110 is a cost efficient robust electric strikewith a solid construction of one-piece castaluminium body and stainless steel striker.Having a deeper than normal strike-keeper area,ES110 is designed to work with an extensiverange of locks and offers the same level ofsecurity and reliability usually provided by moreexpensive electric locking solutions.


Key Features









• 5 Year Warranty

Applications

• Exposed areas





CE Approved




Voltage 12 or 24Vdc

Current 243 mA @ 12Vdc – 187mA @ 24Vdc


Monitoring None











110111-150 TRIMEC ES111-00-WR-THAS 12V PTL WR SS f/plate ANSI Adams Rite no lip

110111-160 TRIMEC ES111-WR-THAS 12V PTL WR SS f/plate ANSI Adams Rite


110112-060 TRIMEC ES112-WR-TABS 12V PTO WR SS f/plate

110112-140 TRIMEC ES112-WR-THAS 12V PTO WR SS f/plate ANSI Adams Rite


110113-140 TRIMEC ES113-WR-THAS 24V PTO WR SS f/plate



Extension Lips




Faceplates










Where Power to Lock and Power to Open functionsmay be required in the same building, the strike must be interchangeable from either “Power to Lock” or “Power to Open” on site. The electric strike should not consume current greater than 243mA @ 12Vdc or 187mA @ 24Vdc and have a solenoid suitable for continuous use. Certifications must include CE. The strike should have a minimum holding force of 680kg, and an endurance rating of 1 million cycles.

9





86m

m

123.

7mm

32mm19mm

43mm

32mm

123.

7mm

86m

m

19mm

43mm

123.

7mm

86m

m

19mm32mm

43mm

35mm

50mm25mm15mm

Specification StatementWhere Power to Lock and Power to Open functionsmay be required in the same building, the strike mustbe interchangeable from either “Power to Lock” or“Power to Open” on site.

The electric strike should not consume current greaterthan 243mA @ 12Vdc or 187mA @ 24Vdc and have asolenoid suitable for continuous use. Certificationsmust include CE.

The strike should have a minimum holding force of680kg, and an endurance rating of 1 million cycles.



110111-150 TRIMEC ES111-00-WR-THAS 12V PTL WR SS f/plate ANSI Adams Rite no lip

110111-160 TRIMEC ES111-WR-THAS 12V PTL WR SS f/plate ANSI Adams Rite



110112-140 TRIMEC ES112-WR-THAS 12V PTO WR SS f/plate ANSI Adams Rite


110113-140 TRIMEC ES113-WR-THAS 24V PTO WR SS f/plate



Extension Lips




Faceplates











Current

Solenoid

Monitoring

Holding Force

Endurance

Environment

Body

Keeper

Latch

12 or 24Vdc

243 mA @ 12Vdc – 187mA @ 24Vdc


None





Stainless Steel

Suit 15mm latch with 3mm door gap

ES100 / ES110 Faceplate Options



Faceplate style l w a Part number

B (ANSI Long) - SS 201.6 36.3 185.7 210100-530

Note: SS - Stainless Steel, AL - Aluminium


Faceplate style l w a Part number

J (Long Rebated) - AL 201.6 32 16 185.7 210100-523

Note: AL - Aluminium


Faceplate style l w a b Part number

D (Euro Sash RH) [DIN Left] - SS 209 31.7 60 11.7 210100-538

F (UK Sash RH) [DIN Left] - SS 251 25 74 12 210100-528

G (UK Sash LH) [DIN Right] - SS 251 25 74 12 210100-527

K (Short Sash LH) [DIN Left] - SS 182 32 36.5 14.7 219100-532

L (Short Sash RH) [DIN Right] - SS 182 32 36.5 14.7 219100-534

Note: SS - Stainless Steel

Note: All faceplates are sold separately

Faceplate Style l w a

B (ANSI Long) - SS 201.6 36.3 185.7

Note: SS - Stainless Steel, AL - Aluminium

PartNumber

210100-530


D (Euro Sash RH) [DIN Left] - SS

F (UK Sash RH) [DIN Left] - SS

G (UK Sash LH) [DIN Right] - SS

K (Short Sash LH) [DIN Left] - SS

L (Short Sash RH)[DIN Right] - SS

PartNumber


Faceplate Style l w a

J (Long Rebated) - AL 201.6 32 16 185.7

Note: AL - Aluminium

PartNumber

210100-523


10

ES100 / ES110 Faceplate Options

eRight Hand Plat(DIN Left)

Left Hand Plate(DIN Right)

w

l

ab

w

a

d

l

la

w

Note: SS - Stainless Steel

Note: All face plates are sold separately

Faceplate Style l w a b

209

251

251

182

182

31.7

25

25

32

32

60

74

74

36.5

36.5

11.7

12

12

14.7

14.7

210100-538

210100-528

210100-527

219100-532

219100-534

Table of Contents


ES150 Series Surface Mounted Electric Strike


Eximo® Panic and Emergency Exit Device Range12

General Description

ES150 is a surface mounted electric strikesuitable for use with rim or surface type deadlatches. This strike is easy to install and can besimply controlled by a keypad, keyswitch orintegrated into any access control system.

ES150 offers high levels of security and featuresusually provided by more expensive electriclocking solutions. The electric strike can be easilyinstalled on steel and wooden door frames.

Key Features


• Easy installation suitable for steel and wooden door frames


• Available in 12Vdc


• IP56 weather resistant as standard

• 5 Year Warranty

Applications

• Surface or rim mounted applications


• Exposed areas


CE Approved

12


General Description

ES150 is a surface mounted electric strikesuitable for use with rim or surface type deadlatches. This strike is easy to install and can besimply controlled by a keypad, keyswitch orintegrated into any access control system.

ES150 offers high levels of security and featuresusually provided by more expensive electriclocking solutions. The electric strike can be easilyinstalled on steel and wooden door frames.

Key Features


• Easy installation suitable for steel and woodendoor frames

• Stainless steel striker for extra strength anddurability



• IP56 weather resistant as standard

• 5 Year Warranty

Applications

• Surface or rim mounted applications


• Exposed areas

Standards and ComplianceCE Approved




Voltage 12Vdc

Current 243 mA @ 12Vdc


Monitoring None





Body Solid Stainless Steel Construction




The electric strike must be suitable for surface mount applications for use with rim or surface mount door locks. Where Power To Lock and Power To Openfunctions may be required in the same building, an individual strike is interchangeable from either “Power to Lock” or “Power to Open” on site. The electric strike should not consume current greater than 243mA @ 12Vdc. Certifications must include CE. The strike should be tested to 1 million operations and have a minimum holding force not less than 680kg.



110151-010 TRIMEC ES151-WR-T 12V PTL WR

110152-010 TRIMEC ES152-WR-T 12V PTO WR

13


Specification StatementThe electric strike must be suitable for surfacemount applications for use with rim or surfacemount door locks.

Where Power To Lock and Power To Openfunctions may be required in the same building,an individual strike is interchangeable fromeither “Power to Lock” or “Power to Open” on site.

The electric strike should not consume currentgreater than 243mA @ 12Vdc. Certificationsmust include CE.

The strike should be tested to 1 millionoperations and have a minimum holding forcenot less than 680kg.

Ensure 1mm Working Gap without Mechanical Interference

Recommended 4mm gap

Minimum 1mm working gap

Latch

Strike

33

32

4

90mm

35

60mm

33mm

32mm

4mm

ES150


110151-010 TRIMEC ES151-WR-T 12V PTL WR

110152-010 TRIMEC ES152-WR-T 12V PTO WR



Current

Solenoid

Monitoring

Holding Force

Endurance

Environment

Body

Keeper

Latch

12Vdc

243 mA @ 12Vdc


None




Solid Stainless Steel Construction

Stainless Steel

Suit 15mm latch with 3mm door gap



General Description

The ES200 series electric strikes are high securityproducts manufactured from solid stainlesssteel and designed for use with all access controlsystems. The strikes are suitable for use withhinged doors which require either fire or security control as part of a building management system.

These strikes are flexible and can be changedfrom fail safe to fail secure, mounted on the leftor right hand side of the door and are availablein 12 or 24Vdc.

They offer a strong, dependable and long-lastingelectric strike solution.

Key Features


• High security

• 4 Hour fire rating (Australian Specific)

• 850kg holding force

• 1 million cycles endurance rating

• Cast stainless steel body


• Low Current consumption - Max 175mA @12Vdc

• Mounting kit supplied as standard

• 5 Year Warranty

Applications


• Fire rated door sets (Australian Specific)




S3 (Security) Australian Lock Standard (AS4145.2.1993)

D3 (Durability) Australian Lock Standard (AS4145.2.1993)


CE Approved

14


General Description

The ES200 series electric strikes are high securityproducts manufactured from solid stainlesssteel and designed for use with all access controlsystems. The strikes are suitable for use withhinged doors which require either fire orsecurity control as part of a buildingmanagement system.

These strikes are flexible and can be changedfrom fail safe to fail secure, mounted on the leftor right hand side of the door and are availablein 12 or 24Vdc.

They offer a strong, dependable and long-lastingelectric strike solution.

Key Features


• High security






• Low Current consumption - Max 175mA @12Vdc

•Mounting kit supplied as standard

• 5 Year Warranty

Applications





Standards and Compliance(Security) Australian Lock Standard (AS4145.2.1993)

(Durability) Australian Lock Standard(AS4145.2.1993)


CE Approved

S3

D3




Voltage 12 or 24Vdc

Current 175 mA @ 12Vdc - 88 mA @ 24Vdc


Monitoring None









The strike should be constructed of stainlesssteel, have a minimum holding force of 850kgand have an endurance rating of 1 millioncycles. The one strike must be changeable fromfail safe to fail secure on site where required.The strike should not consume current greaterthan 175mA at 12Vdc and have a solenoidrated for continuous use. Certifications mustinclude CE.



110201-000 TRIMEC ES201-T 12V PTL

110202-000 TRIMEC ES202-T 12V PTO

110203-000 TRIMEC ES203-T 24V PTL

15


Specification StatementThe strike should be constructed of stainlesssteel, have a minimum holding force of 850kgand have an endurance rating of 1 millioncycles. The one strike must be changeable fromfail safe to fail secure on site where required.The strike should not consume current greaterthan 175mA at 12Vdc and have a solenoidrated for continuous use. Certifications mustinclude CE.


Current

Solenoid

Monitoring

Holding Force

Endurance

Latch

Environment

Body

Keeper

12 or 24Vdc

175 mA @ 12Vdc - 88 mA @ 24Vdc


None

850kg Static Strength Rating


Suitable for 15mm latch bolt with 3mm door gap

Operational temperature range -20°C to +60°C


Stainless Steel

ES200 with 25mm Extension Lip ES200 with 50mm Extension Lip ES200 with 75mm Extension Lip

122m

m

24.5mm

28.5mm26.5mm

176m

m

122m

m

26.5mm

24.5mm

28.5mm

176m

m

122m

m

26.5mm

24.5mm

28.5mm

176m

m

15.5mm 15.5mm 15.5mm


110201-000 TRIMEC ES201-T 12V PTL

110202-000 TRIMEC ES202-T 12V PTO

110203-000 TRIMEC ES203-T 24V PTL


ES2000 Series Monitored Electric Strike


General Description

The ES2000 series electric strikes are monitoredhigh security products manufactured from solidstainless steel and designed for use with all accesscontrol systems. The strikes are suitable for usewith hinged doors which require either fire orsecurity control as part of a building managementsystem.

These strikes are flexible and can be changed fromfail safe to fail secure, mounted on the left or righthand side of the door and are available in 12Vdc.

They offer a strong, dependable and long-lastingelectric strike solution with a 850kg holding forceand endurance rating of 1 million cycles.

Key Features

• Monitored – strike locked and door latched


• High security






• Low current consumption - Max 175ma @12Vdc


• Mounting kit supplied as standard

• Australian designed and made

• 5 Year Warranty

• Weather resistant (IP54)

• Built in protection diode

Applications









CE Approved

16


General Description

The ES2000 series electric strikes are monitoredhigh security products manufactured from solidstainless steel and designed for use with all accesscontrol systems. The strikes are suitable for usewith hinged doors which require either fire orsecurity control as part of a building managementsystem.

These strikes are flexible and can be changed fromfail safe to fail secure, mounted on the left or righthand side of the door and are available in 12Vdc.

They offer a strong, dependable and long-lastingelectric strike solution with a 850kg holding forceand endurance rating of 1 million cycles.

Key Features

•Monitored – strike locked and door latched


• High security






• Low current consumption - Max 175ma @12Vdc


•Mounting kit supplied as standard


• 5 Year Warranty

•Weather resistant (IP54)


Applications








CE Approved

SCEC endorsed for secure areas (Australian Specific)

S3

D3




Voltage 12Vdc



Monitoring Solenoid Monitor - 1 amp NO/NC microswitch

Door/Latch Monitor - 1 amp NO/NC microswitch












112001-000 TRIMEC ES2001-T 12V PTL

112002-000 TRIMEC ES2002-T 12V PTO

112401-000 TRIMEC ES2401-T 12V PTL

17


Specification StatementThe strike should be constructed of solidstainless steel, have a minimum holding forceof 850kg and have an endurance rating of 1million cycles. Monitoring must includeindependent door / latch and solenoidmonitoring. The one strike must be changeablefrom fail safe to fail secure on site whererequired. The strike should not consumecurrent greater than 175mA at 12Vdc and havea solenoid rated for continuous use.Certifications must include CE.


Current

Solenoid

Monitoring

Holding Force

Endurance

Latch

Environment

Body

Keeper

12Vdc

175 mA @ 12Vdc


Solenoid Monitor - 1 amp NO/NC microswitchDoor/Latch Monitor - 1 amp NO/NC microswitch



Suitable for 15mm latch bolt with 3mm door gap



Stainless Steel


122m

m

24.5mm

28.5mm26.5mm

176m

m

122m

m

26.5mm

24.5mm

28.5mm

176m

m

122m

m

26.5mm

24.5mm

28.5mm

176m

m

15.5mm 15.5mm 15.5mm


112001-000 TRIMEC ES2001-T 12V PTL

112002-000 TRIMEC ES2002-T 12V PTO

112401-000 TRIMEC ES2401-T 12V PTL






General Description

The ES2100 is the latest product to join theiconic Trimec range of electric strikes. Tested inaccordance with Australian standards this strikeoffers superior strength, and is durability testedto 1.5 million operations. Standard features include variable voltage, patented field selectable fail safe/fail secure mode change and a unique integrated door position switch.

Integrated Door Position Switch

The ES2100 now offers a unique new monitoringfeature not available in other strikes on themarket today. The strike has an integrated reedswitch that when combined with a specialisedLockwood mortice lock, provides door positionmonitoring. The strike is supplied with astandard door magnet for use with cylindricallatches. Lockwood mortice locks and face plateaccessories are sold separately.

Key Features

• Patented field selectable fail safe/fail secure

• Multi voltage 10–30Vdc

• Fully monitored:

- Integrated door position (reed) switch

- Solenoid/Locked

- Latch position


• 4hr fire rating (Australian Specific)

• Mounting tabs as supplied standard


• 5 Year Warranty

Applications




• Doors requiring additional door position monitoring


SL8 (Security) Australian Lock Standard (AS4145.2.1993)


CE Approved

18


General Description

The ES2100 is the latest product to join theiconic Trimec range of electric strikes. Tested inaccordance with Australian standards this strikeoffers superior strength, and is durability testedto 1.5 million operations. Standard features includevariable voltage, patented field selectable fail safe/failsecure mode change and a unique integrated doorposition switch.

Integrated Door Position Switch

The ES2100 now offers a unique new monitoringfeature not available in other strikes on themarket today. The strike has an integrated reedswitch that when combined with a specialisedLockwood mortice lock, provides door positionmonitoring. The strike is supplied with astandard door magnet for use with cylindricallatches. Lockwood mortice locks and face plateaccessories are sold seperatley.

Key Features

• Patented field selectable fail safe/fail secure

•Multi voltage 10–30Vdc

• Fully monitored:

- Integrated door position (reed) switch- Solenoid/Locked- Latch position


• 4hr fire rating (Australian Specific)

•Mounting tabs as supplied standard


• 5 Year Warranty

Applications




• Doors requiring additional door position monitoring



CE Approved

SL8

D8





112100-000 TRIMEC ES2100-T 0-30V PTL/PTO monitored

112100-010 TRIMEC ES2100-00-T 0-30V PTL/PTO monitored no lip

112100-020 TRIMEC ES2100-08-T 0-30V PTL/PTO monitored 8m extension lip

Extension Lips




Voltage 12 or 24Vdc

Current 200mA @ 12Vdc – 120mA @ 24Vdc


Monitoring Monitoring Latch

Strike locked

Door position (reed switch)

Holding Force 1000kg static strength rating

Endurance Cycle tested to 1.5 million operations



Body Stainless Steel




The strike should be constructed of solidstainless steel, have a minimum holding forceof 1000kg and an endurance rating of 1.5million cycles. Monitoring must includeindependent latch and solenoid monitoring.The strike shall have an integrated reed switchfor door position monitoring and used inconjunction with Lockwood 3572MAGSCmortice lock or tubular latch with door magnet.Certifications must include CE.

19



112100-000 TRIMEC ES2100-T 0-30V PTL/PTO monitored

112100-010 TRIMEC ES2100-00-T 0-30V PTL/PTO monitored no lip

112100-020 TRIMEC ES2100-08-T 0-30V PTL/PTO monitored 8m extension lip

Extension Lips



Specification StatementThe strike should be constructed of solidstainless steel, have a minimum holding forceof 1000kg and an endurance rating of 1.5million cycles. Monitoring must includeindependent latch and solenoid monitoring.The strike shall have an integrated reed switchfor door position monitoring and used inconjunction with Lockwood 3572MAGSCmortice lock or tubular latch with door magnet.Certifications must include CE.


Tubular Latch

41mm

Ø10 Hole

Line upnotch withmagnet

41mm

Magnet(1 per installation)

ES2100 Technical InformationVoltage 12 or 24Vdc

Current 200mA @ 12Vdc – 120mA @ 24Vdc

Solenoid Rated for continuous use

Monitoring LatchStrike lockedDoor position (reed switch)

Holding force 1000kg static strength rating

Endurance Cycle tested to 1.5 million operations

Latch Suitable for 15mm latch bolt with 3mm door gap

Body Stainless Steel


Environment Operational temperature range -20ºC to +60ºC

122m

m

24.5mm

28.5mm26.5mm

176m

m

15.5mm

ES2100



General Description

The ES2600 Series surface mounted electricstrikes are high security products manufacturedfrom stainless steel and designed to be usedwith existing and new panic bars fitted toemergency doors.

When used in conjunction with a standardaccess control system, these strikes convert “Exitonly” doors with “Pullman type” latches into afull access controlled door, thereby allowingauthorised access from the secure side.

The ES2600 series are fully monitored with bothsolenoid and latch/door monitoring functionsand can be changed from fail safe to fail secureon site.

Key Features


• High security




• Body depth only 27mm


• Low current consumption - max 175Ma @ 12Vdc

• Continuously rated solenoid


• 5 Year Warranty

Applications

• For use with panic bars (should be tested as part of EN1125 where standard in force)

• Surface mount

• Egress doors

• Open out door sets




CE Approved

20


General Description

The ES2600 Series surface mounted electricstrikes are high security products manufacturedfrom stainless steel and designed to be usedwith existing and new panic bars fitted toemergency doors.

When used in conjunction with a standardaccess control system, these strikes convert “Exitonly” doors with “Pullman type” latches into afull access controlled door, thereby allowingauthorised access from the secure side.

The ES2600 series are fully monitored with bothsolenoid and latch/door monitoring functionsand can be changed from fail safe to fail secureon site.

Key Features


• High security




• Body depth only 27mm


• Low current consumption - max 175Ma @ 12Vdc



• 5 Year Warranty

Applications

• For use with panic bars (should be tested aspart of EN1125 where standard in force)

• Surface mount

• Egress doors

•Open out door sets




CE Approved





112601-000 TRIMEC ES2601-T 12V PTL

112603-000 TRIMEC ES2603-T 24V PTL


Voltage 12 or 24Vdc

Current 175 mA @ 12Vdc - 88 mA @ 24Vdc



Door/Latch Monitor - 1 amp NO/NC microswitch



Additional Anti friction roller (patented)

Suits panic bars with 15 to 20mm Pullman latch projection





Latch Suits 15 - 20mm pullman latch


The strike should be constructed of stainlesssteel, have a minimum holding force of 650kgand have an endurance rating of 1 millioncycles. Maximum penetration into the doorframe should not exceed 12mm. The one strikemust be changeable from fail safe to fail secureon site where required. The strike should notconsume current greater than 175mA at 12Vdcand have a solenoid rated for continuous use.Certifications must include CE.

21


Specification StatementThe strike should be constructed of stainlesssteel, have a minimum holding force of 650kgand have an endurance rating of 1 millioncycles. Maximum penetration into the doorframe should not exceed 12mm. The one strikemust be changeable from fail safe to fail secureon site where required. The strike should notconsume current greater than 175mA at 12Vdcand have a solenoid rated for continuous use.Certifications must include CE.


Current

Solenoid

Monitoring

Holding Force

Endurance

Additional

Environment

Body

Keeper

Latch

12 or 24Vdc

175 mA @ 12Vdc - 88 mA @ 24Vdc


Solenoid Monitor - 1 amp NO/NC microswitchDoor/Latch Monitor - 1 amp NO/NC microswitch



Anti friction roller (patented)Suits panic bars with 15 to 20mm Pullman latch projection



Stainless Steel

Suits 15 - 20mm pullman latch

ES2600

213m

m

145m

m

70mm

40mm

234m

m

11mm

40mm


112601-000 TRIMEC ES2601-T 12V PTL

112603-000 TRIMEC ES2603-T 24V PTL




General Description

The ES300 series electric strikes are designed forhigh security applications and manufacturedfrom solid stainless steel.

These long ANSI strikes offer a strongdependable and long-lasting electric strikesolution and are suitable for use with any accesscontrol system.

These strikes are extremely flexible and can bechanged from fail safe to fail secure andmounted on the left or right hand side of thedoor, thus reducing the amount of stock neededto cover each application.

Key Features





• Stainless Steel locking pins



• 5 Year Warranty

Applications

• Timber or metal doors





CE Approved

22


General Description

The ES300 series electric strikes are designed forhigh security applications and manufacturedfrom solid stainless steel.

These long ANSI strikes offer a strongdependable and long-lasting electric strikesolution and are suitable for use with any accesscontrol system.

These strikes are extremely flexible and can bechanged from fail safe to fail secure andmounted on the left or right hand side of thedoor, thus reducing the amount of stock neededto cover each application.

Key Features








• 5 Year Warranty

Applications





CE Approved





110321-030 TRIMEC ES321-TBBS-SECFX 12V PTL security fixings


Voltage 12Vdc



Monitoring None








The strike should be constructed of solidstainless steel, have a minimum holding forceof 850kg and have an endurance rating of 1million cycles. The one strike must bechangeable from fail safe to fail secure on sitewhere required. The strike should not consumecurrent greater than 175mA @ 12Vdc and havea solenoid rated for continuous use.Certifications must include CE.

23


Specification StatementThe strike should be constructed of solidstainless steel, have a minimum holding forceof 850kg and have an endurance rating of 1million cycles. The one strike must bechangeable from fail safe to fail secure on sitewhere required. The strike should not consumecurrent greater than 175mA @ 12Vdc and havea solenoid rated for continuous use.Certifications must include CE.

ES300 ANSI Extension Lip ES300 Wide Extension Lip

86m

m

201.

5mm

30.5mm

27.5mm

123m

m

201.

5mm

27.5mm

30.5mm

m36.3mm

11mm 11mm

36.3m


110321-030 TRIMEC ES321-TBBS-SECFX 12V PTL security fixings



Current

Solenoid

Monitoring

Holding Force

Endurance

Environment

Body

Keeper

Latch

12Vdc

175mA @ 12Vdc

Solenoids rated for continuous use.

None

850kg static strength rating




Stainless Steel


ES3000 Monitored Series Electric Strike


General Description

The ES3000 series electric strikes are designedfor high security applications and manufacturedfrom solid stainless steel. These long ANSI strikesoffer a strong dependable and long-lastingelectric strike solution and are suitable for usewith any access control system. These strikes areextremely flexible and can be changed from failsafe to fail secure and mounted on the left orright hand side of the door, thus reducing the amount of stock needed to cover each application.

Key Features








• 5 Year Warranty

Applications






CE Approved

24


General Description

The ES3000 series electric strikes are designedfor high security applications and manufacturedfrom solid stainless steel. These long ANSI strikesoffer a strong dependable and long-lastingelectric strike solution and are suitable for usewith any access control system. These strikes areextremely flexible and can be changed from failsafe to fail secure and mounted on the left orright hand side of the door, thus reducing the amount of stock needed to cover each application.

Key Features








• 5 Year Warranty

Applications






CE Approved





113101-000 TRIMEC ES3101-TBBS 12V PTL ANSI Long f/plate


Voltage 12Vdc




Door / Latch - 1 amp NO/NC microswitch








The strike should be constructed of solidstainless steel, have a minimum holding forceof 850kg and have an endurance rating of 1 million cycles. Monitoring must includeindependent door / latch and solenoidmonitoring. The one strike must be changeablefrom fail safe to fail secure on site whererequired. The strike should not consumecurrent greater than 175mA @ 12Vdc and havea solenoid rated for continuous use.Certifications must include CE.

25


Specification StatementThe strike should be constructed of solidstainless steel, have a minimum holding forceof 850kg and have an endurance rating of 1million cycles. Monitoring must includeindependent door / latch and solenoidmonitoring. The one strike must be changeablefrom fail safe to fail secure on site whererequired. The strike should not consumecurrent greater than 175mA @ 12Vdc and havea solenoid rated for continuous use.Certifications must include CE.

ES3000 ANSI Extension Lip ES3000 Harcor Face Plate Wide Extension Lip

86m

m

201.

5mm

30.5mm

27.5mm

123m

m

201.

5mm

27.5mm

30.5mm

31.6mm36.3mm

11mm 11mm


113101-000 TRIMEC ES3101-TBBS 12V PTL ANSI Long f/plate



Current

Solenoid

Monitoring

Holding Force

Endurance

Environment

Body

Keeper

Latch

12Vdc

175 mA @ 12Vdc

Solenoids rated for continuous use.

Solenoid Monitor - 1 amp NO/NC microswitchDoor / Latch - 1 amp NO/NC microswitch





Stainless Steel


ES9000 Series Pre-Load Strike


General Description

The ES9000 has been designed to suit theharshest commercial environments, and has theunique feature of the ability to operate with upto 25kg of pre-load pressure on the keeper.Pre-load is a common condition that caused bypulling on a door before it unlocks, the weight ofwarped or drooping doors, seals on fire doors, orby differential air pressure created when heatingand cooling systems are in use.

Standard features include multi voltage 10 - 30Vdc and field changeable settings from fail safe to fail secure.

Built to last, this is a premium locking solutionthat has been tested in excess of 2 million cyclesand boasts unique features like no other available on the market today.

Key Features

• Operates under pre load up to 25kg

• Easy field selectable fail safe/fail secure

• Multi voltage 10-30Vdc


• 2.5 million cycles endurance rating

• Latch keeper is significantly quieter in operation

• Weather resistant (IP54)


• Mounting tabs as standard

• Non handed

• 5 Year Warranty

Applications







CE Approved

26


General Description

The ES9000 has been designed to suit theharshest commercial environments, and has theunique feature of the ability to operate with upto 25kg of pre-load pressure on the keeper. Pre-load is a common condition that caused bypulling on a door before it unlocks, the weight ofwarped or drooping doors, seals on fire doors, orby differential air pressure created when heatingand cooling systems are in use.

Standard features include multi voltage 10 - 30Vdc and field changeable settings from fail safe tofail secure.

Built to last, this is a premium locking solutionthat has been tested in excess of 2 million cyclesand boasts unique features like no otheravailable on the market today.

Key Features

•Operates under pre load up to 25kg

• Easy field selectable fail safe/fail secure

•Multi voltage 10-30Vdc


• 2.5 million cycles endurance rating

• Latch keeper is significantly quieter inoperation

•Weather resistant (IP54)


•Mounting tabs as standard

• Non handed

• 5 Year Warranty

Applications


• Doors subjected to side load (pre load)






CE Approved

S3

D3





119001-000 TRIMEC ES9000 PTO/PTL P/Load 0-30V PTO/PTL

119001-010 TRIMEC ES9000 PTO/PTL - NO LIP P/Load 0-30V PTO/PTL no lip

119001-020 TRIMEC ES9000 PTO/PTL - 8MM EXT LIP P/Load 0-30V PTO/PTL 8mm ext lip

119001-060 TRIMEC ES9000 PTO/PTL - EXT LIP HOLES P/Load 0-30V PTO/PTL lip extension holes

Extension Lips




Voltage 10 – 30Vdc

Current 250mA @12Vdc – 130mA @24Vdc


Electrical protection Polarity and back EMF protected


Door / Latch - 1 amp NO/NC microswitchHolding Force 1000kg static


Endurance 1,200,000 cycles endurance rating @ 25kg pre-load

2,500,000 cycles general durability without pre-load conditions






The electric strike should be fully monitoredand have independent door / latch andsolenoid monitor switches. Holding force forthe strike should be not less than 1300kg.

Where Power to Lock and Power to Openfunctions may be required in the samebuilding, a single electric strike should beinterchangeable from either fail safe or failsecure from the rear of the strike.

The electric strike should not consume currentgreater than 250mA @ 12Vdc and have asolenoid rated for continuous use. A fire ratingnot less than 4 hours is required whereapplicable. The strike must be capable ofoperating with up to 25kg of pre-loadpressure applied to the keeper, be tested to2.5 million operations and carry a minimumwarranty of 5 years.

27


Specification StatementThe electric strike should be fully monitoredand have independent door / latch andsolenoid monitor switches. Holding force forthe strike should be not less than 1300kg.

Where Power to Lock and Power to Openfunctions may be required in the samebuilding, a single electric strike should beinterchangeable from either fail safe or failsecure from the rear of the strike.

The electric strike should not consume currentgreater than 250mA @ 12Vdc and have asolenoid rated for continuous use. A fire ratingnot less than 4 hours is required whereapplicable. The strike must be capable ofoperating with up to 25kg of pre-loadpressure applied to the keeper, be tested to2.5 million operations and carry a minimumwarranty of 5 years.


122m

m

24.5mm

28.5mm26.5mm

176m

m

122m

m

26.5mm

24.5mm

28.5mm

176m

m

122m

m

26.5mm

24.5mm

28.5mm

176m

m

15.5mm15.5mm15.5mm

ES9000 Pre-Load Strike Technical InformationVoltage

Current

Solenoids

Electrical protection

Monitoring

Holding Force

Endurance

Latching

Environment

Body

Keeper

10 – 30Vdc

250mA @12Vdc – 130mA @24Vdc

Solenoid rated for continuous use.

Polarity and back EMF protected

Solenoid Monitor - 1 amp NO/NC microswitchDoor / Latch - 1 amp NO/NC microswitch


1,200,000 cycles endurance rating @ 25kg pre-load2,500,000 cycles general durability without pre-load conditions

Suitable for 15mm latch with 3mm door gap



Stainless Steel


119001-000 TRIMEC ES9000 PTO/PTL P/Load 0-30V PTO/PTL

119001-010 TRIMEC ES9000 PTO/PTL - NO LIP P/Load 0-30V PTO/PTL no lip

119001-020 TRIMEC ES9000 PTO/PTL - 8MM EXT LIP P/Load 0-30V PTO/PTL 8mm ext lip

119001-060 TRIMEC ES9000 PTO/PTL - EXT LIP HOLES P/Load 0-30V PTO/PTL lip extension holes

Extension Lips




TB25 Drop Bolt


General Description

The TB25 range of drop bolts represent trueengineering innovation, design excellence andthe superior quality customers have come toexpect and demand from Trimec®. Designed foruse on swing-through, double action doors,these drop bolts are ideal for applications wherean electric strike is impractical.

Key Features

• High Security. Bolt is deadlocked in the extended position

• Bolt position monitored

• Door position monitor with integrated magnet into the strike plate (no need to install a separate reed switch)

• Multiple orientation, drop bolts will work horizontally or vertically

• Power to Lock/ Power to Open

• Continuously Rated Solenoid

• Tamper Proof. Lock cannot be defeated by slipping a metal object between lock and striker plate

• Intelligent Electronics. These intelligent bolts will attempt to re-close the bolt 8 times, allowing time for swing through doors to settle in the closed position

• Thermal Protection. In the event of solenoid overheat, a thermal fuse will operate, eliminating any fire risk

Applications

• Glass doors

• Timber doors


CE Approved

28

TB25 Drop Bolt

General Description


Key Features

• High Security. Bolt is deadlocked in theextended position


• Door position monitor with integrated magnetinto the strike plate (no need to install aseparate reed switch)

•Multiple orientation, drop bolts will workhorizontally or vertically



• Tamper Proof. Lock cannot be defeated byslipping a metal object between lock andstriker plate

• Intelligent Electronics. These intelligent boltswill attempt to re-close the bolt 8 times,allowing time for swing through doors to settlein the closed position

• Thermal Protection. In the event of solenoidoverheat, a thermal fuse will operate,eliminating any fire risk

Applications

• Glass doors

• Timer DoorsStandards and Compliance

CE Approved

TB25 Drop Bolt




188251-010 TRIMEC TB25SQ PTL DROPBOLT 12-24V DC round corner faceplate

188251-020 TRIMEC TB25SQS PTL DROPBOLT 12-24V DC square corner faceplate

188252-010 TRIMEC TB25SQ PTO DROPBOLT 12-24V DC round corner faceplate

188252-020 TRIMEC TB25SQS PTO DROPBOLT 12-24V DC square corner faceplate

Accessories

228250-000 EB25 SS SHORT STRIKE PLATE RH

228250-002 EB25 SS LONG STRIKE PLATE RH

228250-003 EB25 SS HOUSING (843-4---35)

228250-004 EB25 SS DRESS PLATE

TB25-DPK TRIMEC TB25 DRESS PLATE KIT

TB25-SMHK TRIMEC TB25 SURFACE MOUNT KIT

TB25 Technical Information

Voltage 12 or 24Vdc

Current (Start) 1100mA @ 12V, 1000mA @ 24V

Current (Holding) 210mA @ 12V, 90mA @ 24V

Holding Force 1000kg

Locking Mode PTL & PTO

Dimensions (Mortice) 164 x 22mm

Bolt Length 12.7 x 16mm

Faceplate Size 10 x 25mm

Monitoring Contacts Bolt & Door


The bolt must be able to operate in horizontaland vertical orientations. The position of thebolt must be monitored as well as have anintegrated reed switch for door positionmonitoring. The electronic functions mustinclude: 8 x lock and unlock attempts, 8 secondunlock delay, automatic relock after 8 seconds,power reduction circuitry to limit the holdingcurrent, and a one time thermal fuse cut-out incase of solenoid overheating. Locking functioncan be converted from Power to Lock (PTL) toPower to Open (PTO). The faceplate and strikeplate must be finished in stainless steel.

TB25KO Drop Bolt


General Description

The TB25KO range of drop bolts represent trueengineering innovation, design excellence andthe superior quality customers have come toexpect and demand from Trimec®. Designed foruse on swing-through, double action doors,these drop bolts are ideal for applications wherean electric strike is impractical. The TB25KOoffer a unique mechanical override with inintegrated euro profile cylinder.

Key Features


• Mechanical key override in the event of power failure. (Euro Profile Cylinder)









Applications

• Glass doors

• Timber doors


CE Approved

30

TB25KO Drop Bolt

General Description

The TB25KO range of drop bolts represent trueengineering innovation, design excellence andthe superior quality customers have come toexpect and demand from Trimec®. Designed foruse on swing-through, double action doors,these drop bolts are ideal for applications wherean electric strike is impractical. The TB25KOoffer a unique mechanical override with inintegrated euro profile cylinder.

Key Features


•Mechanical key override in the event of powerfailure. (Euro Profile Cylinder)









Applications

• Glass doors

• Timer Doorss


CE Approved

TB25KO Drop Bolt


TB25KO Technical Information

Voltage 12 or 24Vdc





Dimensions (Mortice) 164 x 22mm





The bolt must be able to operate in horizontal andvertical orientations. The position of the bolt mustbe monitored as well as have an integrated reedswitch for door position monitoring. The electronicfunctions must include: 8 x lock and unlockattempts, 8 second unlock delay, automatic relockafter 8 seconds, power reduction circuitry to limitthe holding current, and a one time thermal fusecut-out in case of solenoid overheating. Lockingfunction can be converted from Power to Lock (PTL)to Power to Open (PTO). The faceplate and strikeplate must been finished in stainless steel.



188251-510 TRIMEC TB25KOSQ PTL DROPBOLT 12-24V DC with key override round corner faceplate

188252-510 TRIMEC TB25KOSQ PTO DROPBOLT 12-24V DC with key override round corner faceplate

Accessories

228250-502 EB25KO SS HOUSING FOR BOLT

228250-503 EB25KO SS Housing for Long S/P

228250-504 EB25KO SS Dress Plate

228250-505 EB25KO SS LONG STRIKE PLATE SQ HOLE

TB25KO-DPK TRIMEC TB25KO DRESS PLATE KIT

TB25KO-SMHK TRIMEC TB25KO SURFACE MOUNT KIT

TB38 Drop Bolt


General Description


Key Features










Applications

• Glass doors

• Timber doors


CE Approved

32

TB38 Drop Bolt

General Description


Key Features










Applications

• Glass doors

• Timer DoorsStandards and Compliance

CE Approved

General Description


Key Features










Applications

• Glass doors

• Timber doors


CE Approved

General Description


Key Features










Applications

• Glass doors

• Timber doors


CE Approved

TB38 Drop Bolt


TB38 Technical Information

Voltage 12 or 24Vdc





Dimensions (Mortice) 164 x33mm





The bolt must be able to operate in horizontal andvertical orientations. The position of the bolt mustbe monitored as well as have an integrated reedswitch for door position monitoring. The electronicfunctions must include: 8 x lock and unlockattempts, 8 second unlock delay, automatic relockafter 8 seconds, power reduction circuitry to limitthe holding current, and a one time thermal fusecut-out in case of solenoid overheating. Lockingfunction can be converted from Power to Lock (PTL)to Power to Open (PTO). The faceplate and strikeplate must been finished in stainless steel.


SKU Short Code

188381-010 TRIMEC TB38SQ 12-24VDC PTL

188382-000 TRIMEC TB38SQ 12-24VDC PTO

Accessories

228380-003 TRIMEC EB38 SS LONG STRIKE PLATE RH

228380-004 EB38 SS HOUSING

228380-005 EB38 SS DRESS PLATE

TB38-DPK TRIMEC TB38 DRESS PLATE KIT

TB38-SMHK TRIMEC TB38 SURFACE MOUNT KIT

ES6000 Hook Lock


General Description

ES6000 Hook Lock is suitable for swinging doors,sliding doors and is easily attached to wood orsteel door frames. ES6000 is heavy duty designed with its high preload (side load) capability of up to 300 kg, high holding force of up to 700 kg. Both Power to Open and Power to Lock models are available.

The ES6000 is available in both recess andsurface mounted versions.

The ES6000 recess mounted version is completed with elegant satin stainless steel faceplate. The surface mounted version is completed with a cast aluminium cover that can be supplied in a variety of colours to match existing door frames.

ES6000 can be mounted vertically andhorizontally, with self-latching ability withoutpower for fire applications.

Key Features

• Power to Open or Power to Lock versions available

• Side Load (Pre-Load) Capable: Operates freely with up to 300 kg of side pressure

• Self Latching: Will self latch without power for fire applications


• Robust Construction: Stainless steel components used

• Low Profile: Will protrude only 40mm into door headroom

• Multi Voltage: Automatic selection 12 to 30Vdc with back EMF protection and reverse polarity protection

• Multi Orientation: Can be mounted vertically or horizontally

• Low Current Consumption 12VDC- 250mA after 1 sec. (initial current 830mA) 24VDC- 140mA after 1 sec.(initial current 530mA)

• Monitored: locked and unlocked

• Tested to 300kg preload capability

Applications

• Heavy Duty Applications

• Sliding & Swing door applications

• High Air Pressure Environments (High Pre Load rating)

34

ES6000 Hook Lock

General Description

ES6000 Hook Lock is suitable for swinging doors,sliding doors and is easily attached to wood orsteel door frames. ES6000 is heavy dutydesigned with its high preload (side load)capability of up to 300 kg, high holding force ofup to 700 kg. Both Power to Open and Power toLock models are available.

The ES6000 is available in both recess andsurface mounted versions.

The ES6000 recess mounted version iscompleted with elegant satin stainless steelfaceplate. The surface mounted version iscompleted with a cast aluminium cover that canbe supplied in a variety of colours to matchexisting door frames.

ES6000 can be mounted vertically andhorizontally, with self-latching ability withoutpower for fire applications.

Key Features

• Power to Open or Power to Lock versionsavailable

• Side Load (Pre-Load) Capable: Operates freelywith up to 300 kg of side pressure

• Self Latching: Will self latch without power forfire applications


• Robust Construction: Stainless steelcomponents used

• Low Profile: Will protrude only 40mm intodoor headroom

•Multi Voltage: Automatic selection 12 to30Vdc with back EMF protection and reversepolarity protection

•Multi Orientation: Can be mounted verticallyor horizontally

• Low Current Consumption 12VDC- 250mA after 1 sec. (initial current 830mA)

24VDC- 140mA after 1 sec.(initial current 530mA)

•Monitored: locked and unlocked

• Tested to 300kg preload capability

Applications

• Heavy Duty Applications

• Sliding & Swing door applications

• High Air Pressure Environments (High Pre Load rating)

ES6000 Hook Lock




116001-000 TRIMEC ES6001M-TFAS PTL 12-30V PTL Mortise

116001-010 TRIMEC ES6001S-TA 12-30V PTL Surface

116002-000 TRIMEC ES6001M-TFAS PTO 12-30V PTO Mortise

116002-010 TRIMEC ES6002S-TA 12-30V PTO Surface


Voltage Supply Voltage 12-30Vdc Ground (OV)

Current 12Vdc – 250 mA after 1 sec. (initial current 830 mA)

24Vdc – 140 mA after 1 sec. (initial current 530 mA)

Monitoring Door locked (Solenoid) – Door Closed (Latch)

Strength 1500 lbs. (680kg) static strength rating

70 foot-lbs. dynamic strength rating

Endurance 250,000 cycles endurance testing

Internal Testing achieved: 2,000,000 cycles of operation

Pre-Load 660lbs (300kg) pre-load capability


Lock Body Cast Aluminium Construction

Lock Body Solid Stainless Steel ConstructionLatch

Lock Bolt Solid Stainless Steel


This lock must be able to operate with up to300kg of preload pressure, with a holding forceof 700kg. The lock must be multi voltageselection 12 - 30 Volts with back EMFprotection for reverse polarity. Lock can bemounted both horizontally or vertically. Thelock need to be subjected to vigorous testingand a minimumof 2,000,000 cycles needto be achieved.

35

ES6000 Hook Lock

55

56

200

41

Specification StatementThis lock must be able to operate with up to300kg of preload pressure, with a holding forceof 700kg. The lock must be multi voltageselection 12 - 30 Volts with back EMFprotection for reverse polarity. Lock can bemounted both horizontally or vertically. Thelock need to be subjected to vigorous testingand a minimumof 2,000,000 cycles need to be achieved.

ES6000 Hook Lock Technical InformationVoltage

Current

Monitoring

Strength

Endurance

Pre-Load

Environment

Lock Body

Lock Body

Lock Bolt

Supply Voltage 12-30Vdc Ground (OV)

12Vdc – 250 mA after 1 sec. (initial current 830 mA)24Vdc – 140 mA after 1 sec. (initial current 530 mA)

Door locked (Solenoid) – Door Closed (Latch)

1500 lbs. (680kg) static strength rating70 foot-lbs. dynamic strength rating

250,000 cycles endurance testingInternal Testing achieved: 2,000,000 cycles of operation

660lbs (300kg) pre-load capability

Operational temperature range: -20°C to + 60°C



Solid Stainless Steel


116001-000 TRIMEC ES6001M-TFAS PTL 12-30V PTL Mortise

116001-010 TRIMEC ES6001S-TA 12-30V PTL Surface

116002-000 TRIMEC ES6001M-TFAS PTO 12-30V PTO Mortise

116002-010 TRIMEC ES6002S-TA 12-30V PTO Surface


ES6000 Hook Lock

ES8000 V-Lock


General Description

The ES8000, also known as the V-lock is a hightorque motorised bolt that moves from thevertical position to the horizontal state whenlocked. The bolt moves into the V shaped strikeplate pulling the door aligned with the lock. Thehigh torque motorised bolt can be concealedfrom view or surface mounted and has theworlds first fail-open motor locking mechanismwhich eliminates the need and cost of anadditional key override function.

Slim design with classic satin stainless steelfaceplate, and significant 7mm overall(+/- 3.5mm) door misalignment tolerancemake ES8000 a product with great aestheticappearance as well as easy installation.

Key Features

• Side load - pre load capable lock will unlock with up to 15kg of side pressure, when wired in 3 wire mode. (1 x permanent power, (positive 12-24Vdc) wire. Negative (0 volt return) wire, and 1 x switching input (positive 12-24Vdc) wire

• Door misalignment of up to 3.5mm +/-• Power to Lock (Fail Safe) / Power to Open (Fail Secure) field configurable

• High torque Motorised locking and unlocking (3 wire mode)

• High Speed Operation. Unlocks in less than 1 second

• Surface Mount Accessory Kit. Ideal for 180° swing through glass door applications

• Multiple Orientation – Interior Doors Can be mounted vertically or horizontally (For exterior doors where water ingress is likely ES8000 must be mounted horizontally)

Applications

• Misaligned doors

• Timer Doors

• Glass Doors

• Aluminium Doors


SCEC Endorsed (Intruder Resistant Bracket Required)

Successfully fire rated up to 4hrs on fire door assemblies in accordance with AS1905.1. 2005 (Part 1: Fire resistant door sets)

Successfully used in PAS24 security door set tests

Hour4

36

ES8000 V-Lock

General Description

The ES8000, also known as the V-lock is a hightorque motorised bolt that moves from thevertical position to the horizontal state whenlocked. The bolt moves into the V shaped strikeplate pulling the door aligned with the lock. Thehigh torque motorised bolt can be concealedfrom view or surface mounted and has theworlds first fail-open motor locking mechanismwhich eliminates the need and cost of anadditional key override function.

Slim design with classic satin stainless steelfaceplate, and significant 7mm overall(+/- 3.5mm) door misalignment tolerancemake ES8000 a product with great aesthetic

appearance as well as easy installation.

Key Features

• Side load - pre load capable lock will unlockwith up to 15kg of side pressure, when wiredin 3 wire mode. (1 x permanent power,(positive 12-24Vdc) wire. Negative (0 voltreturn) wire, and 1 x switching input (positive12-24Vdc) wire

• Door misalignment of up to 3.5mm +/-

• Power to Lock (Fail Safe) / Power to Open (Fail Secure) field configurable

• High torque Motorised locking and unlocking(3 wire mode)

• High Speed Operation. Unlocks in lessthan 1 second

• Surface Mount Accessory Kit. Ideal for 180°swing through glass door applications

•Multiple Orientation – Interior Doors Can be mounted vertically or horizontally(For exterior doors where water ingress is likelyES8000 must be mounted horizontally)

Applications

•Misaligned doors• Timer Doors• Glass Doors• Aluminium Doors

Standards and ComplianceSCEC Endorsed (Intruder Resistant Bracket Required)

Successfully fire rated up to 4hrs on fire doorassemblies in accordance with AS1905.1. 2005 (Part 1: Fire resistant door sets)

Successfully used in PAS24 security door set tests

Hour

4

ES8000 V-Lock




118001-010 TRIMEC ES8001-TBAS V-Lock 12-24V DC PTL

118002-010 TRIMEC ES8002-TBAS V-Lock 12-24V DC PTO

218000-000 TRIMEC ES8000-Glass Door Kit


Voltage 12 to 24Vdc, Voltage Tolerance 12V (+15% - 0%) 24V(+/- 15%)

Current Minimum 1 Amp Regulated Supply

Monitoring COM, NO, NC Voltage free changeover contacts rated at 48 dc/100mA)

Security Passed S3 (AS4145.2- 1993)

Strength Maximum 1000kg (with supported strike plate)

Side Load Side Load rated: Motorised Unlocking – 15kg max at bolt

Fail Safe Unlocking – 3kg max at bolt

Endurance 300,000 operations


Lock Body Stainless Steel Lock Body and Faceplate

Bolt 11mm diameter, 20.5mm projection


The lock must be a high torque motorised boltwith Preload tolerance. The strike plate must be shaped in a V format to accommodate formisaligned doors. Lock will unlock with up to15kg of side pressure and will be powered with12-24v and draw no more than 1000mA. Thelock must be configurable for Power to Lock(Fail Safe) or Power to Open (Fail Secure). The lock must be triggered with a magnetpositioned in strike plate, and be monitoredfor locked unlocked and door position.

37

ES8000 V-Lock

Bolt PositionMonitor

Power To Lock (PTL) Wiring Connections

- Access Control (PTL)

ORANGE

BLACK

BLUE

RED

PURPLEWHITE

- 0 volts d.c.

- Positive Continuous Supply

- (COM)- (NO)- (NC)

-

+DC Power

NC

NO


Power To Open (PTO) Wiring Connections

ORANGE

BLACKBLUE

RED

PURPLEWHITE

- 0 volts d.c.- Access Control (PTO)

- Positive Continuous Supply

- (COM)- (NO)- (NC)

NC

NO

-

+DC Power


Power To Lock 2 Wire Control (NOT RECOMMENDED)

ORANGE

BLACKBLUE

RED

PURPLEWHITE

- 0 volts d.c.

- (COM)- (NO)- (NC)

-+

DC Power

Wiring below shows lock in locked position

256

1515

30

Door Jamb

LINE 2

M

LockFaceplate

30

24

42

256

50

210

Specification StatementThe lock must be a high torque motorised boltwith Preload tolerance. The strike plate must beshaped in a V format to accommodate formisaligned doors. Lock will unlock with up to15kg of side pressure and will be powered with12-24v and draw no more than 1000mA. Thelock must be configurable for Power to Lock(Fail Safe) or Power to Open (Fail Secure). Thelock must be triggered with a magnetpositioned in strike plate, and be monitored for locked unlocked and door position.

ES8000 V-Lock Technical InformationVoltage

Current

Monitoring

Security

Strength

Side Load

Endurance

Environment

Lock Body

Bolt

12 to 24Vdc, Voltage Tolerance 12V (+15% - 0%) 24V(+/- 15%)

Minimum 1 Amp Regulated Supply

COM, NO, NC Voltage free changeover contacts rated at 48 dc/100mA)

Passed S3 (AS4145.2- 1993)

Maximum 1000kg (with supported strike plate)

Side Load rated: Motorised Unlocking – 15kg max at bolt Fail Safe Unlocking – 3kg max at bolt

300,000 operations

Operational temperature range -20°C to + 60°C

Stainless Steel Lock Body and Faceplate

11mm diameter, 20.5mm projection


118001-010 TRIMEC ES8001-TBAS V-Lock 12-24V DC PTL

118002-010 TRIMEC ES8002-TBAS V-Lock 12-24V DC PTO

218000-000 TRIMEC ES8000-Glass Door Kit


Warranty


All TRICARE® protected products come with a5 year return to factory warranty from date ofmanufacture. The date of manufacture can bedetermined by looking at the TRICARE®

sticker which indicates the month and year of manufacture.

TRICARE® protects the installer by warrantingaccidental damage that may occur toTRICARE® protected product duringinstallation. This no question asked approachremoves frustration and embarrassment.

Any warranty claims on TRICARE® will bereplaced with NEW product. This ensures thatthe wholesalers will always have new stockon their shelves and not repaired stock.

“Protects the Customer, theInstaller and the Wholesaler”

Table of Contents


Notes


ASSA ABLOY Security SolutionsSchool StreetWillenhallWV13 3PWTel: 0845 223 2124Fax: 0845 223 2125Email: [email protected]: www.uniononline.co.uk

ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience.

Trimec® Product Brochure - AWS

Documents

Transcript of Trimec® Product Brochure - AWS