TOTALRANGE - Wanawake Industrial Supplies
-
Upload
khangminh22 -
Category
Documents
-
view
0 -
download
0
Transcript of TOTALRANGE - Wanawake Industrial Supplies
TOTALRANGE
TO
TA
LR
AN
GE
20
20
20
20
ASHBURTON
DARGAVILLE
FRANKTON
GISBORNE
GORE
HASTINGS
HAWERA
INVERCARGILL
MORRINSVILLE
MT MAUNGANUI
NAPIER
NELSON
NEW PLYMOUTH
NORTH SHORE
OAMARU
PALMERSTON NORTH
PUKEKOHE
RANGIORA
ROTORUA
TAKAKA
TE AWAMUTU
TE RAPA
TIMARU
TOKOROA
WANGANUI
WESTPORT
(03) 308 3147
(09) 439 7335
(07) 847 4994
(06) 868 8214
(03) 208 4882
(06) 870 4450
(06) 278 4185
(03) 218 2059
(07) 889 7681
(07) 575 0504
(06) 842 2304
(03) 547 8000
(06) 758 5133
(09) 414 7214
(03) 434 6956
(06) 357 8888
(09) 238 1800
(03) 313 3425
(07) 347 9110
(03) 525 9847
(07) 871 7062
(07) 847 4994
(03) 684 7036
(07) 886 1700
(06) 344 4804
(03) 789 7033
TradeZone NZ Locations
ASHBURTON
TAKAKA
TOKOROA
MORRINSVILLEMT MAUNGANUI
NORTH SHORE
OAMARU
PUKEKOHE
RANGIORA
TE RAPAFRANKTON
WarrantyIn terms of GEDORE’S warranty policy, all torque wrenches are covered by a lifetime guarantee against defective materials and workmanship. Provided that the tool has been correctly used for its intended purpose and allowances have been made for the wear and tear of moving parts, the torque wrench will be repaired free of charge.
The warranty does not cover torque wrenches which have been misused or which have experienced wear and tear through extensive use.
A warranty return will be assessed by our technical sta� and if the return falls outside of our war-ranty policy, the customer will be noti�ed and quoted for the repair.
CalibrationA standard calibration and the issue of a test certi�cate will be provided as standard practice on any repair conducted.
A SANAS calibration and the issue of a SANAS calibration certi�cate will be done on request at a nominal charge.
ObsolescencePlease note that while GEDORE uses its best endeavours to carry signi�cant stocks of spares to support its torque wrench product range, some spares for older discontinued items are no longer available. In such cases, repair of the torque wrench may not be possible.
“Our guarantee covers all tools against breakage under normal working conditions and is subject to fair wear and tear.”
At GEDORE we take pride in the quality of our products and services and we review all warranty claims with the aim of using the information gained for further product improvement.
Every GEDORE tool is covered by a lifetime guarantee against defective material and workmanship. Provided that the tool has been used correctly for its intended purpose and allowances have been made for wear and tear, this guarantee will allow for the repair or exchange of the tool.
While some deterioration through extensive use might be unavoidable, we will adopt a generous approach when viewing warranty claims. We do, however, set warranty limitations on wear and tear, obvious misuse, missing parts and purposely altered tools to protect ourselves against unreasonable claims.
Should the product fall outside the parameters of the warranty criteria, we will advise the customer on the repair or replacement cost of the article.
© Copyright by Gedore Tools SA (Pty) Ltd.
Gedore strives to be the leading supplier of superior quality tools in Africa and other designated markets.
We seek to build and maintain lasting relationships with customers by responsively o�ering suitable products at fair prices, which consistently conform to the highest level of product and service quality standards.
We strive to increase the value for all stakeholders and to be a preferred supplier, employer and customer.
Quality We strive to be the best that we can be in everything that we do.
Innovation and Knowledge We strive for continuous improvement in all aspects of our business through learning, benchmarking and having a general uneasiness with the status quo.
Responsiveness We have a bias for action by feeling a sense of urgency in everything that we do, and encourage employees to be proactive.
Team Work and Mutual Respect We encourage and support team participation, e�ective communication and mutual respect.
Motivation and People Centred We acknowledge that our employees are the key to our success.
We motivate employees by providing opportunities for advancement, sharing information, fair treatment, training, job security and workplace safety.
Customer Focused We expect all employees to maintain a customer focus in all aspects of their work.
Care for the EnvironmentWe are sensitive of the need to care for the environment and apply ourbusiness processes accordingly.
Corporate Governance We enforce good corporate governance by encouraging honesty, transparency, trust, equity and social responsibility.
DISCLAIMER
As we are constantly improving our products, we reserve the right to make changes as the need arises. The actual products delivered may therefore vary from those depicted in the catalogue.We do not provide any warranties in connection with technical and safety information provided in this catalogue. All customers are therefore advised to refer directly to their manufacturer’s speci�cations and the advice and standards of the relevant professional/trade associations. All products remain the property of Gedore Tools SA (Pty) Ltd until paid for in full.We cannot accept any liability for printing errors. Reproduction of any part of this catalogue requires the prior written permission of Gedore Tools SA (Pty) Ltd. All rights reserved worldwide.
GEDORE TOOLS SA
WARRANTY POLICY
TORQUE WRENCH WARRANTY &
CALIBRATION POLICY
MISSION STATEMENT
VALUE SYSTEM
GEDORE Werkzeugfabrik, is a family-owned manufacturer of superior quality hand tools and related industrial products. Headquartered in Germany, with manufacturing operations in Germany, Austria, UK, South Africa and Brazil, GEDORE has a global footprint, distributing their products to more than 70 countries worldwide.
Under the motto of “Inspired by tradition - forging the future”, GEDORE is celebrating its 100-year anniversary this year. Traditional forging methods coupled with 21st century robotic and automated operations ensure that GEDORE’s tools meet the core objectives of accuracy, quality, versatility and customer satisfaction.
GEDORE – high-quality hand tools with a lifetime guarantee
GEDORE operations are ISO-accredited, and all products are manufactured to exceed international operating standards. Every GEDORE hand tool boasts a lifetime guarantee, o�ering consumers “Tools for Life”.
With a wide selection of drop-forged, precision-crafted hand tools to choose from, GEDORE provides high-quality tools to a range of industries, artisans and professionals.
1
2
1473550-UK-LS3TORQUE WRENCH
1562PADJUSTABLE
WRENCH
65DT 2142ALLEN KEY
SET
NEW PRODUCTSNEW
15
ADJUSTABLE
WRENCH
84S8000CIRCLIP PLIERS SETS
32D19 NZU-10TSOCKET SET
3
NEW PRODUCTS
78S8393PLIERS
SET
133650CCLUB
HAMMERS
TORQUE TOOLS
UNCOMPROMISINGAMBITIONControlled screw tightening - reliable and safe for more than 50 years
142
INDEX
SPANNERS 4-17
SOCKETS & ACCESSORIES 18-49
IMPACT SOCKETS & ACCESSORIES 50-59
SCREWDRIVERS 60-71
PLIERS 72-89
AUTOMOTIVE & SPECIAL TOOLS 90-101
SHEETMETAL & TOOL ASSORTMENTS 102-127
STRIKING TOOLS 128-133
VDE INSULATED SAFETY TOOLS 134-141
TORQUE TOOLS 142-177
PULLERS 178-187
NON-SPARKING TOOLS 188-193
APPRENTICE TOOLKITS 194-203
ARTISAN TOOLKITS 204-211
MERCHANDISERS 212-215
SPANNERS, SETS
ADJUSTABLE WRENCHES
COMBINATION SPANNERS
6
FLARE NUT SPANNERS
13
SLOGGING SPANNERS
16
RATCHET SPANNERS
9
OPEN ENDED SPANNERS
14
HOOK SPANNERS
17
RING SPANNERS
10
ADJUSTABLE WRENCHES
15
CROWFOOT SPANNERS
17
Code ! y
6000240 5 100 156000320 5,5 100 15600040 6 100 14600059 7 112 21600067 8 125 25600075 9 138 33600083 10 148 44600091 11 158 50600105 12 168 60600113 13 185 77600121 14 198 88600148 15 210 103600156 16 220 120600164 17 232 140600172 18 245 160600180 19 258 190600199 20 270 220600202 21 280 250600210 22 292 300600229 23 305 335600237 24 318 370
UD PROFILE protects bolt heads
The wave form of the ring pro� le allows the spanner to hold in all situations, even where the bolt dimensions are outside the tolerance range.
Torque is transmitted to the � anks of the bolt head. This means that the edges cannot be deformed and the bolt is e� ectively protected.
The contact surface area between the spanner and the bolt head is markedly increased due to the wave form. This allows a more even distribution of the contact pressure, which in turn allows the application of a higher torque.
As the torque is transmitted to the � anks of the bolt, even damaged bolt heads may be gripped and turned.
2
3
4
Code ! y
600245 25 328 410600253 26 340 450600261 27 352 500600288 28 370 560600296 29 370 570600318 30 390 645600326 32 412 780002540 33 412 1000600415 34 412 840600342 36 460 1160600350 38 -11/2” 460 1450002527 41 520 1485002528 46 560 1900002529 50 590 2350002530 55 620 36006004070 60 660 36006004660 65 710 45006004740 70 760 56006004820 75 810 65456004900 80 860 8800
1
SPANNERS
Combination Spanners
NO. 1 B – THE STRONG ALL-ROUNDER › According to DIN 3113 Form B, ISO 3318, ISO 7738. › Sizes 5 and 5.5mm with hexagon ring, from size 6mm upwards with UD pro� le. › GEDORE vanadium steel 31CrV3, chrome-plated. › Carefully forged and professionally machined. › Overloading indicated by deformation. › The o� set ring ensures a better grip on deep-seated or inset nuts or bolts. › Top-grade industrial quality for the hardest of continuous use.
Slim ribbed open end
for added strength
guarantees maximum
torques
Jaw: ground precisely to exact nominal
size for optimum contact areas
Ring: 10° o� set from shaft, with UD
pro� le for gentle transmission of force
Non-glare look due to matt
chrome plating
1 B (MM)COMBINATION SPANNERS
3
6
UD PROFILE protects bolt heads
Code ! " Contents 0
601152 1B-04M 10 13 17 19 0.500601160 1B-06M 10 11 13 14 17 19 0.670601187 1B-08M 10 12 13 14 17 19 22 24 1.380601200 1B-10M 10 11 12 13 14 15 16 17 18 19 2.100601217 1B-12M 10 11 12 13 14 17 19 22 24 27 30 32 3.260601268 1B-17M 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 1.910601268TR 1B-17M WITH TOOL ROLL 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 2.270601438 1B-18M 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24 2.390601292 1B-TOP 20M 20 MOST POPULAR SIZES 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24 27 30 3.373601276 1B-26M 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 6.740601276TR 1B-26M WITH TOOL ROLL 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 6.740601179 1B-13A 1/4” 5/16” 3/8” 7/16” 1/2” 9/16” 5/8” 11/16” 3/4” 13/16” 7/8” 15/16” 1.” 2.285601209 1B-017A 1/4” 5/16” 3/8” 7/16” 1/2” 9/16” 5/8” 11/16” 3/4” 13/16” 7/8” 15/16” 1.” 1.1/16” 1.1/8” 1.3/16” 1.1/4” 4.765
1425/41/1B FOAM ASSORTMENTS 122SLOGGING SPANNERS 16
Code " y
600512 1/4” 100 14600520 5/16” 125 25600539 3/8” 148 45600547 7/16” 158 50600555 1/2” 185 80600563 9/16” 198 97600571 5/8” 220 120600598 11/16” 245 174600601 3/4” 258 185600628 13/16” 280 250600636 7/8” 292 300600644 15/16” 318 370600652 1.” 340 450600660 1.1/16” 352 500
31 B (AF)COMBINATION SPANNERSinch
Code " y
600679 1.1/8” 370 570600881 1.3/16” 370 570600687 1.1/4” 412 780600695 1.5/16” 412 790600709 1.3/8” 460 1150600717 1.7/16” 460 1160600725 1.1/2” 460 11706007330 1. 5/8” 520 15006007410 1.3/4” 550 19006007760 1.7/8” 550 19006007840 2” * 580 24006007920 2.1/16” * 580 32006008060 2.3/16” 620 36006008140 2.1/4” 620 40006008220 2.3/8” * 660 44006008300 2.7/16” * 660 4800
3 1 B (MM) / 1 B (AF)COMBINATION SPANNER SETS
*WHILE STOCKS LAST
7
SPANNERS
Code ! y
608955 6 100 12608963 7 110 15608971 8 120 20608998 9 130 32609005 10 140 34609013 11 150 45609021 12 160 50609048 13 170 65609056 14 180 73609064 15 190 90609161 16 200 120609072 17 210 105609188 18 220 165
3
NO. 7 – SLIM LINE › According to DIN 3113 Form A, ISO 3318, ISO 7738. › Gedore vanadium steel 31CrV3, chrome-plated. › Carefully forged and professionally machined. › Slim jaw and jaw walls make this spanner lighter overall. › Overloading indicated by deformation. › Secure grip. › Non-glare look thanks to matt chrome-plating. › Designed for universal use.
Jaw: ground precisely to exact nominal size
for optimum contact areas
Ring: 15° o� set from shaft, with UD
pro� le for gentle transmission of force
Non-glare look due to matt
chrome plating
7 (MM)COMBINATION SPANNERSwith same size each end
Code ! y
609080 19 230 150609196 20 240 220609218 21 250 250609099 22 260 215609226 23 270 335609102 24 280 295609234 25 290 410609242 26 300 450609110 27 310 400609250 28 320 440609269 29 330 500609129 30 340 544609137 32 380 624
3 7 (MM)COMBINATION SPANNER SETS
Code ! Contents 0
609358 7-17M 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 1.65609579 7-21 M 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24 27 30 32 3.70609374 7-26 M 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 5.11
8
Code Contents 0
2297434 7R 8 10 13 17 19 0.930
Code Contents 0
2297442 7R 8 9 10 11 12 13 14 15 16 17 18 19 2.840
3
Combination Ratchet Spanners
THE REVOLUTION › With same size each end. › UD pro� le. › High torque transfer. › Gedore vanadium steel 31CrV3. › Non-glare look thanks to matt chrome-plating › Locking insert and pawl manganese-phosphated. › Hot forged. › Jaw: ground precisely to exact nominal size for
optimum contact areas.
Hollow pro� le comfortable to hold
Non-glare look due to matt
chrome plating
Warp-resistant geometry with double
T-girder e� ect
For ratchet loosening
and fast tightening
7 RCOMBINATION RATCHET SPANNERS
3 3 7 R-005COMBINATION RATCHET SPANNER SET5 pieces
› Most popular sizes combined in a set. › Flat pattern. › UD pro� le. › High torque transfer. › In plastic case. › Dimensions: 275 x 150 x 42mm.
7 R-012COMBINATION RATCHET SPANNER SET12 pieces
› Most popular sizes combined in a set. › Flat pattern. › UD pro� le. › High torque transfer. › In robust sheet-metal case. › Dimensions: 320 x 210 x 55mm.
Code ! y
2297051 8 7 140 322297078 9 7 150 422297086 10 7 160 542297094 11 7 164 632297108 12 7 170 692297116 13 7 180 882297124 14 7 190 1012297132 15 7 200 1252297140 16 6 212 1372297159 17 6 225 160
Code ! y
2297167 18 6 237 1972297175 19 6 250 2022219433 21 6 274 2622297191 22 6 292 3192297205 24 6 325 5202297213 27 6 359 5902297221 30 5 399 7802297248 32 5 424 9202219549 34 5 449 10102219557 36 5 480 1208
9
Code ! y 0
651206 10 177 0.055651214 11 189 0.065651222 12 198 0.075651230 13 208 0.095651249 14 218 0.110651257 15 231 0.120651265 16 244 0.140651273 17 255 0.170651516 18 269 0.220651281 19 283 0.240
SPANNERS
3
Swivel Head Wrenches
534COMBINATION SWIVEL HEAD WRENCHES
› Slim pattern, with free moving socket wrench. › With hole for tommy bars 26 D and 26 RS (please order separately). › Gedore vanadium steel 31CrV3, heads polished, chrome-plated.
3 534COMBINATION SWIVEL HEAD WRENCH SETS
Code ! Contents 0
651389 534-6M 10 12 13 14 17 19 1.000651397 534-9M 10 11 12 13 14 15 16 17 19 1.410
2 AFRING SPANNER
Code " y 0
003558 13/16x7.8” 285 0.360003561 1.1/16x1.1/4” * 370 0.700003567 1.7/16x1.5/8” 440 1.300003568 1.13/16x2” * 540 2.200
Code ! y
601535 6x7 170 50601551 8X9 182 65601594 10x11 195 95601659 12x13 212 120601691 14x15 225 155601721 16x17 245 210601748 17x19 265 260601756 18x19 265 260601780 20x22 287 325601799 19x24 305 410601802 21x23 305 410601837 24x26 325 475601853 24x30 345 580601861 25x28 345 580 601918 27x32 370 680 601926 30x32 370 680 601934 30x36 400 1000 601942 32x36 400 1100 003518 36x41 440 1150003519 38x42 440 1200003520 41x46 535 2250003521 46x50 535 2150
Double Ended Ring Spanners
2DOUBLE ENDED RING SPANNERS
NO. 2 – RING SPANNER › Rings: thin walled with deep o� set. › Chrome VANADIUM steel 31CrV3. › Carefully forged and professionally machined. › Ring: thin-walled, 5° deep o� set from shaft, with UD pro� le for gentle transmission of force. › High bending strength does not fracture or splinter when overloaded,
thus minimising the risk of injury. › In accordance with SANS 1112 and DIN 838.
3
3
*WHILE STOCKS LAST
10
TORX® = Registered trademark of Acument Intellectual Properties, LLC. USA
TX4 FLAT RING SPANNERS - TORX®straight pattern, for protruding
TORX® head screws
› Chrome Vanadium steel 31CrV3. › Chrome plated, polished rings. › For outside TORX®.
Code 9 + & y 0
6059800 E6xE8 M5 - M7 5,74 x 7,52 110 0.0146059990 E10xE12 M8 - M10 9,42 x 11,17 140 0.0406060140 E14xE18 M12 - M14 12,9 x 16,7 180 0.0746060220 E20xE24 M16 - M20 18,45 x 22,16 226 0.163
2 DOUBLE ENDED RING SPANNER SETS
› Sets of the most popular sizes. › Rings: thin walled with deep o�set. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1112 and DIN 838.
3
Code ! Contents 0
603058 2-8M 6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22 1.380
603112 2-11M 6x7 8x9 10x11 12x13 14x15 16x17 17x19 18x19 20x22 21x23 24x30
2.630
603090 2-12M 6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22 21x23 24x26 25x28 27x32
3.440
Code ! y 0
006001 11x13 152 0.075006006 13x15 185 0.1356470120 13x17 185 0.135006002 14x16 185 0.1206470390 14x17 185 0.135006003 15x17 186 0.120006007 16x18 185 0.170006005 19x21 233 0.230006004 19x22 233 0.230
Code " y 0
006051 7/16x1/2 150 0.075006052 9/16x5/8 185 0.135006053 3/4x7/8 230 0.275
› Chrome Vanadium steel 31CrV3. › Chrome plated, polished rings.
304 / 304 (AF) HALF-MOON RING SPANNERS
3 304 HALF-MOON RING SPANNER SETS
› Chrome Vanadium steel 31CrV3. › Chrome plated, polished rings.
Code ! Contents 0
634018 6 M 11x13 14x16 15x17 16x18 19x21 19x22 1.200
3
11
1“ SOCKET SET 47
IMPACT SOCKETS 50
No. 2A + 2 AR
Deep Ring Spanners
2 ASINGLE ENDED RING SPANNERSoffset
› Heavy-duty pattern for highest torques. › Chrome Vanadium steel — 31CrV3. › Optional accessories: No. 2 AR extension tube for extending the
lever arm.
SPANNERS
Code No. ! y 0
6048600 0 24-30 460 0.6006048790 1 32-41 610 1.1506048870 2 46-55 760 2.1506048950 3 60-100 860 2.850
Code ! y 0
6033840 24 180 0.3506033920 27 190 0.4006034060 30 200 0.4506034140 32 235 0.5506030150 34 235 0.6506034220 36 245 0.6506034300 41 265 0.7506034490 46 280 1.0506034570 50 290 1.1506034650 55 300 1.4006034730 60 345 2.1006034810 65 355 2.3006035030 70 365 2.6006035110 75 375 3.0006035380 80 385 3.4506035460 85 385 3.8006035540 90 410 4.8706035620 95 410 4.5606035700 100 412 4.500
For heavy duty ring spanner 2A.
Steel tube, chrome plated.
2AREXTENSION TUBES
Code ! y 0
1648934 17x19 315 0.5001382853 19x22 315 0.7001648926 19x24 365 0.700031320 22x24 365 0.800031322 24x27 370 0.8006262790 24x30 450 1.400031325 27x30 450 1.400031170 27x32 450 1.400031328 30x36 450 1.400031330 32x36 450 1.600
Reversible ratchet with two di� erent size heads.
Bi-hexagon and ‘rat-tail’ handle.
Friction Type Ratchet
29 ICONSTRUCTION RATCHETS
12
Code ! y 0
005001 8x10 140 0.0456056970 9x11 145 0.050005002 10x11 150 0.0556051070 10x12 150 0.110005003 11x13 160 0.075
3 NO. 400 › Chrome Vanadium steel 31CrV3. › Ring o�set at 15o. Hexagon gap o�set at 30o. › Chrome plated, polished open rings. › In accordance with DIN 3118.
Ring 15° o�set from shaft Hexagon gap 30° o�set,
UD-section at 15° o�set
400 (MM) / 400 (AF) FLARE NUT SPANNERS
inch
Code " y 0
005051 5/16x3/8 140 0.045005053 7/16x1/2 160 0.075
Code ! y 0
005004 12x14 170 0.100005005 14x17 195 0.135005006 17x19 210 0.160005007 22x24 250 0.320
Code " y 0
005055 9/16x5/8 195 0.135005056 5/8x3/4 210 0.160
Flare Nut Spanners
3
3 400 FLARE NUT SPANNER SETS
› Chrome Vanadium steel 31CrV3. › Ring o�set at 15o. Hexagon gap o�set at 30o. › Chrome plated, polished open rings. › In accordance with DIN 3118.
Code ! Contents 0
634026 5 M 8X10 11X13 12X14 17X19 22X24 1.200
13
Open Ended Spanners
NO. 6 – STRONG AND ACCURATE › In accordance with SANS 1112 and DIN 895. › Chrome plated. › Slim pattern. › Chrome Vanadium steel 31CrV3.
Non-glare look due to
matt chrome plating
Jaw: ground precisely to exact nominal
size for optimum contact areas
Secure grip due to slim
pro�le shaft
Slim pattern
6 (MM) DOUBLE OPEN ENDED SPANNERS
6 DOUBLE OPEN ENDED SPANNER SETS
Code ! y 0
606383 6x7mm 122 0.020606421 8x9mm 140 0.025606448 8x10mm 140 0.030606472 10x11mm 157 0.040606537 12x13mm 172 0.060606588 14x15mm 188 0.070606626 16x17mm 205 0.110606642 17x19mm 222 0.155606650 18x19mm 222 0.155606677 19x22mm 236 0.210606685 20x22mm 236 0.210
Code ! y 0
606707 21x23mm 247 0.240606731 24x26mm 266 0.300606758 24x27mm 266 0.300606774 25x28mm 280 0.355004518 27x32mm 302 0.460606812 30x32mm 302 0.460004520 32x36mm 328 0.650004521 36x41mm 360 0.850004522 38x42mm 360 0.800004523 41x46mm 400 1.100004524 46x50mm 450 1.600
SPANNERS
Code ! Contents 0
607703 4 M 10x11 12x13 14x15 16x17 0.280607711 6 M 8x9 10x11 12x13 14x15 16x17 19x22 0.510607738 8 M 6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22 0.690607754 10 M 6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22 21x23 24x27 1.230607878 11 M 6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22 21x23 24x27 30x32 1.690607770 12 M 6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22 21x23 24x26 25x28 27x32 2.040
14
› A smaller angle 15º wrench aligns the wrench with the nut in a manner that o� ers speed, precision,
ergonomic comfort and provides greater leverage distance thus reducing hand & arm fatigue.
› Non-Protruding on the movable jaw end. This allows a greater ease of use in tight spaces.
› Thicker Handle provides a comfortable � t making it easy to apply force.
› Chrome vanadium, exceeding international standards as ISO 6787-1982
› Uniform mechanical grinding of face gives wrenches a very � at and strong industrial appearance.
› With ruler scale.
› Blister packed.
Adjustable Wrenches
Code ! y 0
6368000 150 22 155 0.1556368190 200 28.6 205 0.2506368270 250 32.8 255 0.4606368350 300 38.1 306 0.7006368430 375 50.0 383 1.0306368510 450 60.0 460 1.675
62PADJUSTABLE WRENCHES
Close up
NEW
A heavy-duty, Industrial 15º Adjustable WrenchChrome vanadium, exceeding international standards as ISO 6787-1982
15
Code ! y 0
009000 25 180 0.400009002 27 180 0.400009003 30 190 0.500009004 32 195 0.600009035 34 195 0.600009005 36 210 0.800009006 41 225 1.000009007 46 255 1.300009008 50 280 1.7006400850 55 310 2.7006400930 60 310 2.7006401070 65 360 3.4006401150 70 360 4.6006401230 75 395 5.9006401310 80 410 7.0006401580 85 410 6.8006401660 90 455 10.0006401740 95 * 455 9.5006401820 100 500 14.6006401900 105 500 13.5006402040 110 500 13.3006402120 115 525 16.8006402200 120 525 17.100
Code " y 0
010051 15/16” * 185 0.400010050 1” * 185 0.400010053 1.1/8” * 185 0.400010054 1.1/4” * 195 0.500010056 1.7/16” 200 0.700010057 1.1/2” * 200 0.600010058 1.5/8” * 225 0.800010059 1.11/16” * 225 0.800010060 1.3/4” * 240 1.100010062 1.7/8” * 240 1.100010063 2” * 250 1.2006479930 2.3/16” * 260 1.6006480000 2.1/4” * 260 1.6006480190 2.3/8” * 270 1.6006480350 2.9/16” 290 2.2006480430 2.5/8” 290 2.2006480510 2.3/4” 325 2.4006480780 3” 325 3.100
Code ! y 0
010001 24 185 0.300010002 27 185 0.400010003 30 195 0.500010004 32 195 0.500010035 34 195 0.400010005 36 200 0.7006474460 38 205 0.660010006 41 225 0.800010007 46 240 1.100010008 50 250 1.2006475940 55 260 1.5006476080 60 270 1.6006476160 65 290 2.2006476240 70 325 2.5006476320 75 325 3.2006476400 80 345 3.6006476590 85 345 3.9006476670 90 380 7.0006476750 95 380 7.0006476830 100 * 410 6.6006476910 105 * 415 9.6006477050 110 * 435 9.6006477130 115 * 435 9.6006477210 120 480 9.8006477480 125 510 9.8006477560 130 510 13.600
AUTOMOTIVE 99
CLUB HAMMERS 133
Chrome Vanadium steel 31CrV3.
Designed for heavy duty applications.
Shot blast � nish.
In accordance with DIN 133.
Chrome Vanadium steel 31CrV3.
Designed for heavy duty applications.
Shot blast � nish.
In accordance with DIN 7444.
SPANNERS
Slogging Spanners
306 (MM) / 306 (AF)RING SLOGGING SPANNERS
inch
133 (MM)OPEN ENDED SLOGGING SPANNERS
*WHILE STOCKS LAST *WHILE STOCKS LAST
16
Code ! y 0
6670050 13 * 160 0.1006670130 14 * 160 0.1006676920 16 * 200 0.1706670210 17 * 200 0.1506677060 18 * 200 0.2206670480 19 * 200 0.2506677140 21 * 200 0.2606670560 22 * 200 0.3006670640 24 * 250 0.4506670720 27 * 250 0.5006670800 30 * 250 0.6506670990 32 * 250 0.7006671020 36 * 315 1.1506671290 46 * 315 1.5006671370 50 * 315 1.600
Code ) y 0
6335850 16 - 18 110 0.0206335930 20 - 22 110 0.0256336580 25 - 28 135 0.0406336660 30 - 32 135 0.0456336740 34 - 36 170 0.0756336820 40 - 42 170 0.0806336900 45 - 50 205 0.1156337040 52 - 55 205 0.1206337120 58 - 62 240 0.2006337200 68 - 75 240 0.2106337390 80 - 90 280 0.2906337470 95 -100 280 0.300
Code , y 0
6354480 3 178 0.1356354560 4 178 0.1406354640 5 230 0.2756354720 6 230 0.2756354990 8 230 0.285
Code ) y 0
6333990 16 - 20 110 0.0206334020 25 - 28 135 0.0406334100 30 - 32 135 0.0456334290 34 - 36 170 0.0756334370 40 - 42 170 0.0806334450 45 - 50 205 0.1156334530 52 - 55 205 0.1206334610 58 - 62 240 0.2006334880 68 - 75 240 0.2106334960 80 - 90 280 0.2906335180 95 - 100 280 0.3006335260 110 - 115 335 0.480
Hook Spanners
Crowfoot Spanners
44
CALIPER FACE SPANNERS
Chrome Vanadium steel 31CrV3.
Manganese phosphated.
Similar to DIN 3116.
40
HOOK SPANNERS
In accordance with DIN 1810, Form A.
Chrome Vanadium steel 31CrV3.
Manganese phosphated.
For slotted round nuts.
3114
CROWFOOT SPANNERS
40Z
PIN SPANNERS
Chrome Vanadium steel 31CrV3.
Chrome plated.
Opening at right angle to handle for maximum accessibility.
In accordance with DIN 1810, Form A.
Chrome Vanadium steel 31CrV3.
Manganese phosphated.
For cross-drilled nuts.
OPEN ENDED SLOGGING SPANNERS
*WHILE STOCKS LAST / INDENT ONLY
17
SOCKETS &
ACCESSORIES
(1/4”) SETS / RATCHETS
20
(3/8”) SOCKETS / ACCESSORIES
25
(3/4”) SETS / RATCHETS
42
(1/4”) SOCKETS / ACCESSORIES
22
(1/2”) SETS / RATCHETS
28
(3/4”) SOCKETS / ACCESSORIES
44
(3/8”) SETS / RATCHETS
24
(1/2”) SOCKETS / ACCESSORIES
36
(1”) SETS / RATCHETS / SOCKETS / ACCESSORIES 47
Sets (1/4")
For manually operated sockets and accessories with 1/4” square drive.
Chrome Vanadium steel 31CrV3.
Dimensions: 200x120x38mm.
R (1/4") square drive
20 ESOCKET SETS 1/4"
Code No. Ratchet Sockets Accessories 0
6172100 No.20 EMZ ! 2093 Z-94 1 20 4 4,5 5 6 7 8 9 10 11 13 + 2087 2090-4
) 2095- 2098
0.71
6172250 No.20 MDX ! 2093 Z-94 1 20 4 5 6 7 8 9 10 11 12 13 IKS20 PZD1 PZD2 PZD3 IKS20 PH1 PH2 PH3 IS20-4 IS20-5.5 IS20-6.5 IS20-7 ITX20 T8 T10 T15 T20 T25 T27 T30 T40 IN20L 3 4 5 6 7 8
‚ 2090-4) 2095 - 209820 MDX Foam InsertMDX Plastic Case
1.197
6172450 No.20 EAU-3 # 2093 U-3 1 20 3/16 7/32 1/4 9/32 5/16 11/32 3/8 7/16 1/2
+ 2087‚ 2090-4) 2095 - 2098
0.76
Outside diameter turned and knurled using high-
tech CNC machinery.
4.
Counterbored, square socket drive fluted, manu-
facturer and socket size permanently stamped.
5.
R 1
A key feature of GEDORE’S socket manufacture is the use of chrome vanadium steel in a hot forging process. As the heated metal is forged, the grains are bent to follow the shape of the forging die, thus maintaining an unbroken grain structure throughout the article. This grain structure and the resulting elastic and toughness properties of a GEDORE socket can easily be compared to the � brous resilience of a tree branch.
As chrome vanadium steel cannot be cold forged, GEDORE’S competitors using cold forging processes are forced to use metallurgically modi� ed steels to accommodate this type of manufacture, resulting in inferior elastic and toughness properties.
In summaryGEDORE sockets are hot forged to obtain a superior strength to weight ratio. Competitor sockets are cold forged primarily to reduce manufacturing cost.
Blank cropped to size from 31CrV3.
Machined to size.Hot forged in the forging press.
1. 2. 3.
Degreased – grease would destroy
the protective gas atmos-phere in hardening.
6.
Hardened under protective gas
atmosphere, followed by annealing.
Nickel plated and matt-chrome plated. The electrolytically applied nickel coating ensures
corrosion protection. The electroplated chrome improves the
look and gives the socket a perfect finish.
Sand blasted in preparation for surface coating.
7. 8. 9.
Hot forged. Cold forged.
20
SOCKETS
Socket Manufacturing Process
m b
Ratchets (1/4")
2093 U-10 REVERSIBLE RATCHET 1/4"
› Particularly for heavy duty use in industry and with utility vehicles. › According to DIN 3122, ISO 3315. › With recessed lever change, locks in middle position. › Return angle of �ve degrees. › Non-slip 2-component handle with hanging hole. › For hand-operated sockets and accessories with square drive
as per DIN 3120 - C 6.3, ISO 1174. › Ball locking device. › Gedore vanadium steel 31CrV3, chrome plated.
2093 U-3 REVERSIBLE RATCHET 1/4"
› Especially for working in con�ned spaces, as in the automotive business. › According to DIN 3122, ISO 3315. › With non-slip metal disc change, �ne-toothed (72 teeth) and robust. › Return angle of �ve degrees. › Non-slip 2-component handle with hanging hole. › For hand-operated sockets and accessories with square drive
as per DIN 3120 - C 6.3, ISO 1174. › Ball locking device. › Gedore vanadium steel 31CrV3, chrome plated.
Code No. a „ a A° y 0
6170590 2093 U-3 1/4 6.3 5 129 0.095Code No. a „ a A° y 0
6180470 2093 U-10 1/4 6.3 15 129 0.109
20 NZ SOCKET SETS 1/4"
Code No. Ratchet Sockets Accessories 0
6172460 No.20 NZA ! 2093 Z-94 1/4“ drive sockets 4 4,5 5 6 7 8 9 10 11 12 13 143/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2
+ 2087 2090-2 / 4 Extensions
) 2095 - 2098 2088 Flexible Extension Foam Insert Plastic Case
1.050
6172465 No.20 NZI ! 2093 Z-94 1/4“ drive sockets 4 4.5 5 6 7 8 9 10 11 12 13 14mm3/16 7/32 1/4 9/32 5/16 11/32 3/8 7/16 1/2Torx T8 T10 T15 T20 T25 T27 T30 T40Screwdriver bits IS20 4 5.5 6.5 7Screwdriver sockets IKS20 PH0 PH1 PH2 PH3
‚ 2090-2 / 4 Extensions ) 2095 - 2098+ 2087 2088 Flexible Extension Foam Insert Plastic Case
1.150
For manually operated sockets and accessories with 1/4” square drive.
Chrome Vanadium steel 31CrV3.
Dimensions: 200x120x38mm.
20NZA 20NZI
NEW
R
R
21
20L (MM) SOCKETS 1/4"hexagon, long pattern
› Manually operated sockets with knurled base. › Chrome Vanadium steel 31CrV3. › Chrome plated and polished. › In accordance with SANS 1113 and DIN 3120.
R 1
Code ! y 0
6191400 4.0 50 0.0176191590 4.5 50 0.0176191670 5.0 50 0.0186191830 6.0 50 0.0206191910 7.0 50 0.0246192050 8.0 50 0.0276192130 9.0 50 0.0306192210 10.0 50 0.0336192480 11.0 50 0.0476192560 12.0 50 0.0506192640 13.0 50 0.054
IN20L (MM) SCREWDRIVER BIT SOCKET 1/4"for in-hex screws, long pattern
R
Code No. ; PH y 0
6174579 IKS 20 0 0 28 0.0116174580 IKS 20 1 1 28 0.0116174660 IKS 20 2 2 28 0.0126174740 IKS 20 3 3 28 0.012
IKS 20 SCREWDRIVER BIT SOCKET 1/4"for cross-head screws PH
R
› Square drive as per DIN 3120 - C 6.3, ISO 1174, with ball retaining groove › Manually operated sockets with knurled base. › Chrome plated and polished. › Chrome Vanadium steel 31CrV3.
R
22
SOCKETS
› Square drive as per DIN 3120 - C 6.3, ISO 1174, with ball retaining groove › Manually operated sockets with knurled base. › Chrome plated and polished. › Chrome Vanadium steel 31CrV3.
Code $ y 0
1933256 3 60 0.0241933264 4 60 0.0251933272 5 60 0.0271933280 6 60 0.0291933298 7 60 0.0381933299 8 60 0.050
Code ! y 0
6165400 No.20 4mm 25 0.0096165590 No.20 4.5mm 25 0.0106165670 No.20 5mm 25 0.0106165830 No.20 6mm 25 0.0106165910 No.20 7mm 25 0.0126166050 No.20 8mm 25 0.0146166130 No.20 9mm 25 0.0166166210 No.20 10mm 25 0.0206166480 No.20 11mm 25 0.0256166560 No.20 12mm 25 0.0306166640 No.20 13mm 25 0.0356166720 No.20 14mm 25 0.037
R 1
20 (MM) SOCKETS 1/4"hexagon › Manually operated sockets with knurled base. › Chrome Vanadium steel 31CrV3. › Chrome plated and polished. › In accordance with SANS 1113 and DIN 3120.
Sockets (1/4")
20 (AF) SOCKETS 1/4"hexagon
R 1
Code ! y 0
6167020 No.20 3/16AF 25 0.0096167100 No.20 7/32AF 25 0.0096167290 No.20 1/4AF 25 0.0256167370 No.20 9/32AF 25 0.0106167450 No.20 5/16AF 25 0.0136167530 No.20 11/32AF 25 0.0156167610 No.20 3/8AF 25 0.0186167880 No.20 7/16AF 25 0.0236167960 No.20 1/2AF 25 0.0296161840 No.20 9/16AF 25 0.036
2093 Z-94 RATCHET HANDLE WITH COUPLER 1/4" › Used throughout industry and the automotive world. › According to DIN 3122, ISO 3315. › With square coupler, medium-�ne toothed, extremely rugged. › Return angle of eighteen degrees. › For hand-operated sockets and accessories with square drive as per DIN 3120 - C 6.3, ISO 1174. › Ball locking device. › Gedore vanadium steel 31CrV3, chrome plated.
Code No. a „ a A° y 0
6170750 2093 Z-94 1/4 6.3 18 129 0.076
› For manually operated sockets and accessories with 1/4” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3123.
Accessories (1/4")
2097 SWIVEL HANDLE 1/4" › For manually operated sockets and accessories with 1/4” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3122.
Code No. a „ a y 0
6171050 2097 1/4 6.3 146 0.094
2090-4
2090 EXTENSIONS 1/4"
Code No. a „ a y 0
6170320 2090-2 1/4 6.3 55 0.0256170400 2090-4 1/4 6.3 97 0.0416171210 2090-6 1/4 6.3 148 0.0616171211 2090-10 1/4 6.3 220 0.0906173340 2090-12 1/4 6.3 305 0.124
2094 COUPLER 1/4" › For manually operated sockets and accessories with 1/4” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3123.
2087 SLIDING T-BAR 1/4" › For manually operated sockets and accessories with 1/4” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3123.
Code No. a „ a y 0
6170160 2087 1/4 6.3 115 0.039
Code No. a „ a y 0
6170830 2094 1/4 6.3 19.8 0.006
Code No. 7 + & y 0
6190430 ITX 20 T8 T8 M2,5 2,31 30.5 0.0136190780 ITX 20 T10 T10 M3 - M3,5 2,74 30.5 0.0146190860 ITX 20 T15 T15 M3,5 - M4 3,27 30.5 0.0146190940 ITX 20 T20 T20 M4 - M5 3,86 30.5 0.0146191080 ITX 20 T25 T25 M4,5 - M5 4,43 30.5 0.0146191160 ITX 20 T27 T27 M4,5 - M6 4,99 30.5 0.0146191240 ITX 20 T30 T30 M6 - M7 5,52 30.5 0.0156265890 ITX 20 T40 T40 M7 - M8 6,65 33.5 0.025
ITX20 SCREWDRIVER BIT SOCKET 1/4“for recessed TORX® head screws
R
› Manually operated sockets with knurled base. › Chrome Vanadium steel 31CrV3. › Chrome plated and polished. › In accordance with SANS 1113 and DIN 3120. › TORX® = registered trademark of Acument Intellectual
Properties, LLC. USA
Code No. ? K L y 0
6171560 IS 20 4x0,8 4.0 0.8 28 0.0116171640 IS 20 5,5x1 5.5 1.0 28 0.0126174230 IS 20 6,5x1,2 6.5 1.2 28 0.0126174310 IS 20 8x1,6 8.0 1.6 28 0.012
IS 20 SCREWDRIVER BIT SOCKET 1/4"for slotted head screws
R
IKS 20 PZD SCREWDRIVER BIT SOCKET 1/4"for cross-head screws Pozi PZ
R
› Square drive as per DIN 3120 - C 6.3, ISO 1174, with ball retaining groove › Manually operated sockets with knurled base. › Chrome plated and polished. › Chrome Vanadium steel 31CrV3.
Code No. < PZ y 0
6187130 IKS 20 PZD 1 1 28 0.0126187210 IKS 20 PZD 2 2 28 0.0136187480 IKS 20 PZD 3 3 28 0.014
R
R
R
23
› Square drive as per DIN 3120 - C 6.3, ISO 1174, with ball retaining groove › Manually operated sockets with knurled base. › Chrome plated and polished. › Chrome Vanadium steel 31CrV3.
2098DRIVING HANDLE 1/4"
› According to DIN 3122, ISO 3315. › For hand-operated sockets with square drive as per DIN 3120, ISO 1174 › Ball locking device
Code No. a „ a y 0
6171480 2098 1/4 6.3 140 0.070
Code No. a „ a y 0
6170240 2088 1/4 6.3 140 0.045
2095UNIVERSAL JOINT 1/4"
› For manually operated sockets and accessories with 1/4” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3123.
2030CONVERTER 1/4" TO 3/8"
› For manually operated sockets and accessories with 1/4” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3123.
Code No. a „ a y 0
6170910 2095 1/4 6.3 38 0.026
Code No. Q „
Q a „
a y 0
6170080 2030 1/4 6.3 3/8 10 26 0.020
2088FLEXIBLE EXTENSION 1/4"
› For manually operated sockets and accessories with 1/4” square drive. › Chrome Vanadium steel 31CrV3.
3/8“1/4“10 mm6,3 mm
R
R
R
S (3/8") Square Drive
Sets (3/8")
24
SOCKETS
c ! D30 FMZ
SOCKET SET 3/8"
› Manually operated 3/8” sockets and accessories. › Supplied in blue powder coated, D19 K steel box. › Dimensions: 281x77x37mm.
Code No. Ratchet Sockets Accessories 0
623202 D30 FMZ ! 3093 Z-94 3 D 30 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
3090-125 1.490
c !
D30 HMZSOCKET SET 3/8"
› Manually operated 3/8” sockets and accessories. › Supplied in blue powder coated, D19 J steel box. › Dimensions: 290x186x52mm.
Code No. Ratchet Sockets Accessories 0
623962 D30 HMZ ! 3093 Z-94 3 D 30 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
+ 30873090-250 3090-125
) 3095 C 3081
2.750
3093 U-3 REVERSIBLE RATCHET 3/8"
› For manually operated sockets and accessories with 3/8” square drive. › Chrome Vanadium steel 31CrV3. › With non-slip metal disc change, �ne-toothed (72 teeth) and robust. › Return angle of �ve degrees. › In accordance with SANS 1113 and DIN 3122.
Ratchets (3/8")
3093 Z-94 RATCHET HANDLE WITH COUPLER 3/8“
› For manually operated sockets and accessories with 3/8” square drive. › Chrome Vanadium steel 31CrV3. › With non-slip metal disc change, �ne-toothed (72 teeth) and robust. › Return angle of ten degrees. › In accordance with SANS 1113 and DIN 3122.
Code No. a „ a A° y 0
6237090 3093 U-3 3/8 10 5 200 0.244
Code No. a „ a A° y 0
6237680 3093 Z-94 3/8 10 10 200 0.223
Sockets (3/8")
S
D 30 (MM) SOCKETS 3/8"bi-hexagon UD profile
› Manually operated sockets with thin walls and knurled base. › Chrome Vanadium steel 31CrV3. › Chrome plated and polished. › In accordance with SANS 1113 and DIN 3124.
3
3
Code Ratchet Sockets Accessories 0
623968 ! 3093 Z94
3 D 30 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22mm 1/4 9/32 5/16 11/32 3/8 7/16 1/2 9/16 19/32 5/8 11/16 3/4 25/32 13/16 7/8
3087 Sliding T bar3090 125mm Extension3090 250mm ExtensionPlastic InsertMetal Case
3.025
Code ! y 0
6230160 No.30 6mm* 28 0.0256230240 No.30 7mm* 28 0.0246230320 No.30 8mm* 28 0.0246230400 No.30 9mm* 28 0.0276230590 No.30 10mm* 28 0.0296230670 D30 11mm 28 0.0296230750 D30 12mm 28 0.0336230830 D30 13mm 28 0.0386230910 D30 14mm 28 0.0396231050 D30 15mm 30 0.0406231130 D30 16mm 30 0.0466231210 D30 17mm 30 0.0566231480 D30 18mm 30 0.0586231560 D30 19mm 30 0.0666231640 D30 20mm 30 0.0666231720 D30 21mm 30 0.0786231800 D30 22mm 31 0.088
*Hexagon
Code ! y 0
2016613 D30 1/4AF 28 0.0252101009 D30 9/32AF 28 0.0241997122 D30 5/16AF 28 0.0242101017 D30 11/32AF 28 0.0261997130 D30 3/8AF 28 0.0326232610 D30 7/16AF 28 0.0286232880 D30 1/2AF 28 0.0386232960 D30 9/16AF 28 0.0356233180 D30 19/32AF 30 0.0416233260 D30 5/8AF 30 0.0466233340 D30 11/16AF 30 0.0566233420 D30 3/4AF 30 0.0651997157 D30 25/32AF 30 0.0701997165 D30 13/16AF 30 0.0746232020 D30 7/8AF 31 0.083
S
D 30 (AF) SOCKETS 3/8"bi-hexagon UD profile
› Manually operated sockets with thin walls and knurled base. › Chrome Vanadium steel 31CrV3. › Chrome plated and polished. › In accordance with SANS 1113 and DIN 3124.
*Hexagon
S NEW
25
D30 NZZ SOCKET SET 3/8"
c !
› Manually operated 3/8” sockets and accessories. › Supplied in blue powder coated, D19 Y steel box. › In high-density foam insert.
Code No. a „ a y 0
6237760 3094 3/8 10 29 0.019
Code No. a „
a Q „
Q y 0
6238140 3095 3/8 10 3/8 10 50 0.053
Code No. a „
a Q „
Q y 0
6236010 3019 1/2 12,5 3/8 10 36 0.057
Accessories (3/8")
TORX® = Registered trademark of Acument Intellectual Properties, LLC. USA.
TORX® = Registered trademark of Acument Intellectual Properties, LLC. USA.
S TX 30 SOCKETS 3/8"for protruding TORX® head screws
ITX 30 SCREWDRIVER BIT SOCKETS 3/8"for recessed TORX® head screws
IN 30 (MM) SCREWDRIVER BIT SOCKETS 3/8"for in-hex screws
Code ! 9 + & y 0
6250270 TX30 E5 E5 M4 4.73 28 0.0256250350 TX30 E6 E6 M5 5.74 28 0.0256250430 TX30 E7 E7 M6 6.16 28 0.0256250510 TX30 E8 E8 M6-M7 7.52 28 0.027
Code ! 9 + & y 0
6246320 ITX30 T 20 T20 M4-M5 3.86 49 0.0506246830 ITX30 T 25 T25 M4,5-M5 4.43 49 0.0516247210 ITX30 T 27 T27 M4.5-M6 4.99 49 0.0516247560 ITX30 T 30 T30 M6-M7 5.52 49 0.0516247720 ITX30 T 40 T40 M7-M8 6.65 49 0.052
Code No. L 0
6241010 IN30 4mm 47 0.038
6241280 IN30 5mm 47 0.390
6241360 IN30 6mm 47 0.041
6241440 IN30 8mm 49 0.053
6242920 IN30 10mm 49 0.073
S
N S
26
SOCKETS
1/2“3/8“12,5 mm10 mm
3095 UNIVERSAL JOINT 3/8"
3094 COUPLER 3/8" › For manually operated sockets and accessories
with 3/8” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3122.
3019 CONVERTER 3/8" TO 1/2"
› For manually operated sockets and accessories with 3/8” square drive. › CHROME VANADIUM steel – 531CrV3. › In accordance with ISO 3316 and DIN 3123. › With ball locking device.
› For manually operated sockets and accessories with 3/8” square drive. › CHROME VANADIUM steel – 31CrV3. › In accordance with SANS 1113 and DIN 3123.
Code No. a „
a Q „
Q y 0
6236280 3020 1/4 6,3 3/8 10 28 0.026
3087 SLIDING T-BAR 3/8" › For manually operated sockets and accessories
with 3/8” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3122.
› For manually operated sockets and accessories with 3/8” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3122.
30 SPARES 3/8"
3081 L-HANDLE 3/8"
Code No. a „
a y 0
6236360 3081 3/8 10 180 0.163
Code No. a „
a y 0
6236520 3087 3/8 10 163 0.128
3090-75
3090 EXTENSIONS 3/8"
› For manually operated sockets and accessories with 3/8” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3122.
Code No. a „
a y 0
6236600 3090/ 75 3/8 10 75 0.0716236790 3090/125 3/8 10 125 0.1106236870 3090/250 3/8 10 250 0.197
3096 SWIVEL HANDLE 3/8"
Code No. a „
a y 0
6238220 3096 3/8 10 250 0.171
S
545767 3096 Repair Kit545759 3093 U-3 Repair Kit
514632 D 19 K Box514640 D 19 J Box515175 D 30 F Insert515280 D 30 H Insert
3090-125
3090-250
27
3/8“ 1/4“10 mm 6,3 mm
3020 REDUCER 3/8" TO 1/4"
› For manually operated sockets and accessories with 3/8” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3122.
› For manually operated sockets and accessories with 3/8” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3122.
› For the 3096 power bar and 3093 U-3 ratchet. › For F and H socket sets. Blue powder coated steel case. › Black matt-�nish insert.
Code No. 1B Spanners Ratchet Sockets Accessories 0
615595 D19 1BMZ 10 11 13 14 17 19 22
! 1993 Z-94 10 11 12 13 14 15 16 17 1 9 22
1990-125145-250137-250
4.540
T (1/2") square drive
Sets (1/2")
Code No. Sockets 0
612936 C19 MK C19 8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 19-3/4 22 23 24-15/16 26 -1. 27-1.1/16 28 30-1.3/16 32-1.1/4
2.270
614122 D19 MK D19 8 10 11 12 13 14 15 16 17 19 22 23 24 26 27 28 30 32
2.430
616419 D19 AK D19 5/16AF 11/32AF 3/8AF 7/16AF 1/2AF 9/16AF 19/32AF 5/8AF 11/16AF 3/4AF 13/16AF 7/8AF 15/16AF 1.AF 1.1/16AF 1.1/8AF 1.3/16AF 1.1/4AF
2.250
d ! 19 AK / MK
SOCKET SETS 1/2"20 pieces
› Manually operated 1/2” sockets. › Supplied in blue powder coated, D19 K steel box. › Dimensions: 281x77x46mm.
Code No. Sockets 0
611921 SR-C19Z 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 19-3/4 22
1.390
Accessories ! 1993 Z-94 1990/75 Extension Socket Rail
616834 SR-D19Z 10 12 13 14 15 16 17 19 22 24 1.460
Accessories ! 1993 Z-94 1990/75 Extension Socket Rail
T !
19 SRSOCKET SETS 1/2"13 pieces
› Manually operated 1/2” sockets and accessories. › Blister packed.
28
SOCKETS
Code No. Sockets 0
612286 C19 HMZ C19 8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 19-3/4 22
1.940
Accessories ! 1993 Z-94 1990/125 Extension
614610 D19 HMZ D19 8 10 11 12 13 14 15 16 17 19 22 1.930
Accessories ! 1993 Z-94 1990/125 Extension
612316 C19 KMZ C19 10-3/8 12 13-1/2 14 15-19/32 17 19-3/4 22 24-15/16 27-1.1/16
2.010
Accessories ! 1993 Z-94 1990/125 Extension
614653 D19 KMZ D19 10 12 13 14 15 17 19 22 24 27 2.050Accessories ! 1993 Z-94 1990/125 Extension
d ! 19 HMZ / KMZ
SOCKET SETS 1/2"15 / 14 pieces
› Manually operated 1/2” sockets and accessories. › Supplied in blue powder coated, D19 K steel box. › Dimensions: 281x77x46mm.
T ! 19 1BMZ
SOCKET SETS 1/2"23 pieces
› Manually operated 1/2” sockets and accessories. › Supplied in blue powder coated, D19 J steel box.
T
*WHILE STOCKS LAST
29
Code No. Ratchet Sockets Accessories 0
616699 D19 GMU-10T $ 1993 U-10 T 10 11 12 13 14 15 17 18 19 21 22 24
+ 1987 1990-125
1990-250
5.700
611956 C19 GMU-10T * $ 1993 U-10 T 10 11 12 13 14 15 17 18 19 21 22 24
+ 1987 1990-125
1990-250
5.700
T !
19 GMU-10TSOCKET SETS 1/2"18 pieces
› Manually operated 1/2” sockets and accessories. › Supplied in blue powder coated, D19 J steel box. › Dimensions: 290x186x52mm.
Code No. Ratchet Sockets Accessories 0
611980 C19/22 TMZ ! 1993 Z-94 8-5/16 9-11/32 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 18-11/16 19-3/4 20-25/32 21-13/16 22 24-15/16 26 -1.27-1.1/16 28 29-1.1/8 30-1.3/16 32-1.1/4
1990-125 1990-250
+ 1987) 1995
5.200
616524 D19/22 TMZ ! 1993 Z-94 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24 26 27 28 29 30 32
1990-125 1990-250
+ 1987) 1995
5.200
19/22 TMZSOCKET SETS 1/2"29 pieces
› Manually operated 1/2” sockets and accessories. › Supplied in blue powder coated,
D19 T steel box. › Dimensions: 435x170x50mm.
T !
Code No. Ratchet Sockets Accessories 0
611999 C19/22 TMU-10T $ 1993 U-10 T
8-5/16 9-11/32 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 18-11/1619-3/4 20-25/32 21-13/16 22 24-15/16 26 -1. 27-1.1/16 28 29-1.1/8 30-1.3/16 32-1.1/4
+ 1987 1990-125 1990-250
) 1995
5.400
616532 D19/22 TMU-10T
$ 1993 U-10 T
8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24 26 27 28 29 30 32
+ 1987 1990-125 1990-250
) 1995
5.400
T ! 19/22 TMU-10T
SOCKET SETS 1/2"29 pieces
› Manually operated 1/2” sockets and accessories. › Supplied in blue powder coated,
D19 T steel box. › Dimensions: 435x170x50mm.
Code No. Ratchet Sockets Accessories 0
612413 C19 TM97U-10T $ 1993 U-10 T 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 18-11/16 19-3/4 21-13/16 22 24-15/16 30-1.3/16 32-1.1/4
1990-125 1990-250
1997-37550-20.8
4.540
615455 D19 TM97U-10T $ 1993 U-10 T 10 11 12 13 14 15 16 17 19 20 22 24 27 30 32
1990-125 1990-250
1997-37550-20.8
4.740
T !
19 TM97U-10TSOCKET SETS 1/2"22 pieces
› Manually operated 1/2” sockets and accessories. › Supplied in blue powder coated,
D19 T steel box. › Dimensions: 435x170x50mm.
Code No. Ratchet Sockets Accessories 0
612456 C19 TMZ ! 1993 Z-94 8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 18-11/16 19-3/4 21-13/16 22 24-15/16 26 -1.27-1.1/16 29-1.1/8 30-1.3/16 32-1.1/4
+1987 1990-125
1990-250) 1995/ 1985
5.480
614831 D19 TMZ ! 1993 Z-94 8 10 11 12 13 14 15 16 17 19 21 22 23 24 26 27 28 30 32
+1987 1990-125
1990-250) 1995/ 1985
5.560
614572 D19 TMA-Z ! 1993 Z-94 10 13 14 15 16 17 19 22 24 27 30 32 3/8 7/16 1/2 9/16 11/16 13/16 1.
+19871990-1251990-250
) 1995/ 1985
5.420
T !
19 TMZ / TMAZSOCKET SETS 1/2"27 pieces
› Manually operated 1/2” sockets and accessories. › Supplied in blue powder coated, D19 T steel box. › Dimensions: 435x170x50mm.
30
SOCKETS
Code No. Ratchet Sockets Accessories 0
612464 C19 TMU-10T $ 1993 U-10 T 8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 18-11/16 19-3/4 21-13/16 22 24-15/16 26 -1.27-1.1/16 29-1.1/8 30-1.3/16 32-1.1/4
+1987 1990-125
1990-250) 1995/ 1985
5.620
615196 D19 TMU-10T $ 1993 U-10 T 8 10 11 12 13 14 15 16 17 19 21 22 23 24 26 27 28 30 32
+1987 1990-125
1990-250) 1995/ 1985
5.700
616206 D19 TAU-10T $ 1993 U-10 T 5/16AF 3/8AF 13/32AF 7/16AF 1/2AF9/16AF 19/32AF 5/8AF 11/16AF 3/4AF25/32AF 13/16AF 7/8AF 15/16AF 1. AF1.1/16AF 1.1/8AF 1.3/16AF 1.1/4AF
+19871990-1251990-250
) 1995/ 1985
5.650
T !
19 TMU / TAU-10TSOCKET SETS 1/2"27 pieces
› Manually operated 1/2” sockets and accessories. › Supplied in blue powder coated, D19 T steel box. › Dimensions: 435x170x50mm.
T !
C19 YMAU-10TSOCKET SETS 1/2"32 pieces
› Manually operated 1/2” sockets and accessories. › Supplied in blue powder coated, D19 T steel box. › Dimensions: 526x190x52mm.
Code No. Ratchet Sockets Accessories 0
612367 C19 YMAU-10T $ 1993 U-10 T 8-5/16 9-11/32 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 18 19-3/4 21-13/16 22 24-15/16 26 -1.27-1.1/16 29-1.1/8 30-1.3/16 32-1.1/47/16AF 9/16AF 7/8AF
1990-125 1990-250
1997-375 50-20.8+ 1987) 1995Joint
7.230
T
31
T ! D19 YMAU-10T
SOCKET SET 1/2"43 pieces
› Manually operated 1/2” sockets and accessories. › Supplied in blue powder coated, D19 Y steel box. › Dimensions: 526x190x52mm.
Code No. Ratchet Sockets Accessories 0
616222 D19 YMAU-10T $ 1993 U-10 T 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 27 5/16AF 11/32AF 3/8AF 13/32AF 7/16AF 1/2AF 9/16AF 19/32AF 5/8AF 11/16AF 3/4AF 25/32AF 13/16AF 7/8AF 15/16AF 1. AF
1990-1251990-250
+ 1987-375) 1995 50-20.8/ 1985
7.390
32
SOCKETS
Code No. 1B Spanners Ratchet Sockets Accessories 0
612383 C19 YM1B-10T 10 11 12 13 14 15 16 17 19 22 24 $ 1993 U-10 T 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 19-3/4 22 24-15/16
1990-125 1997-375
50-20.8
6.040
616230 D19 YM1B-10T 10 11 12 13 14 15 16 17 19 22 24 $ 1993 U-10 T 10 11 12 13 14 15 16 17 19 22 24 1990-125 1997-375
50-20.8
6.500
T !
19 YM1B-10TSOCKET SETS 1/2"
› Manually operated 1/2” sockets and accessories. › Supplied in blue powder coated, D19 Y steel box. › Dimensions: 526x190x52mm.
Code No. Spanners Ratchet Sockets Accessories 0
612391 C19 62MU-10T No.2 6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22No.6 6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22
$ 1993 U-10 T 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 18-11/16 19-3/4 20-25/32 21-13/16 22
1990-1251990-250
+ 1987) 1995
6.760
616001 D19 62MU-10T No.2 6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22No.6 6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22
$ 1993 U-10 T 10 11 12 13 14 15 16 17 18 19 20 21 22
1990-1251990-250
+ 1987) 1995
7.120
T ! 19 62MU-10T
SOCKET SETS 1/2"
› Manually operated 1/2” sockets and accessories. › Supplied in blue powder coated, D19 Y steel box. › Dimensions: 526x190x52mm.
Code Reversible Ratchet Sockets Accessories615298 ! 1993 Z-94 D19 10 11 12 13 14 15 16 17 18 19 21 22 23 24 26 27 30 32mm
3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1.1/16 1.1/8 1.3/16 1.1/4+1987
1990-1251990-250
) 1995 50/20.8mm
D19 NZU-Z94SOCKET SET 1/2" T
!
NEW
› Manually operated 1/2” sockets and accessories. › Supplied in blue powder coated steel box. › In high-density foam insert.
Code No. Sockets 0
615625 PM-9 IN19 5 6 7 8 9 10 12 14 17 1.500615641 PA-9 IN19 3/16AF 7/32AF 1/4AF 9/32AF 5/16AF 3/8AF
1/2AF 9/16AF 5/8AF1.470
615627 SR-PM9 IN19 5 6 7 8 9 10 12 14 17 (Including Holding Rail and Adaptor)
0.960
T !
IN19 PM-9 / PA-9SOCKET SETS 1/2"
› Manually operated 1/2” sockets. › Supplied in blue powder coated Ref D30 K steel box. › Dimensions: 281x77x37mm. › Also available in a blister pack.
Code No. Sockets 0
617415 PM-10 IN19 5 6 7 8 9 10 12 14 17 19 1.260617431 PA-10 IN19 3/16AF 7/32AF 1/4AF 5/16AF 3/8AF
1/2AF 9/16AF 5/8AF 9/32AF IKS19 2
1.100
617417 SR-PM10 IN19 5 6 7 8 9 10 12 14 17 19 (Including Holding Rail and Adaptor)
1.220
T ! IN19 PM-10 / PA-10
SOCKET SETS 1/2"
› Manually operated 1/2” allen key sockets. › Supplied in black matt-� nish insert.
T ! INX19
SOCKET SETS 1/2"
› Manually operated 1/2” spline sockets. › Supplied in black matt-� nish insert.
Code No. Sockets 0
617989 PM-5D INX19 5 6 8 10 12 INX19L 6-100 8-100 10-100 12-100 IKS19 2
1.320
617601 6 INX19-6 5 6 8 10 12 IKS19 2
0.510
T
33
T ! IN19 PM-5D / PA-5D
SOCKET SETS 1/2"
› Manually operated 1/2” sockets. › Supplied in black matt-� nish insert.
T ! IN19 PM-6 / PA-6
SOCKET SETS 1/2"
› Manually operated 1/2” sockets. › Supplied in black matt-� nish insert. › Also available in a blister pack.
Code No. Sockets 0
617423 PM 5D IN19 6 8 10 12 14 IN19L 6-100 8-100 10-100 12-100 14-100
1.250
617458 PA 5D IN19 1/4AF 5/16AF 3/8AF 1/2AF 9/16AF IN19L 1/4-100 5/16-100 3/8-100 1/2-100 9/16-100
1.100
Code No. Sockets 0
617474 PM-6 IN19 5 6 8 10 12 14 1.260617849 PA-6 IN19 3/16AF 1/4AF 5/16AF 3/8AF 1/2AF 9/16AF 1.100
617476 SR PM-6 IN19 5 6 8 10 12 14 (Including Holding Rail and Adaptor)
0.600
TORX® = Registered trademark of Acument Intellectual Properties, LLC. USA.
T ! ITX19
TORX® SOCKET SETS 1/2"
› Manually operated 1/2” sockets. › Supplied in blue powder coated Ref D30 K steel box. › Dimensions: 281x77x37mm. › Also available in a blister pack.
Code No. Sockets 0
665983 MT ITX19 T20 T25 T27 T30 T40 T45 T50 1.000665986 SR-MT ITX19 T20 T25 T27 T30 T40 T45 T50
(Including Holding Rail and Adaptor)
0.540
Registered trademark of Acument Intellectual Properties, LLC. USA.
T !
ITX / TX19 FMTTORX® SOCKET SET 1/2"
› Manually operated 1/2” sockets. › Supplied in blue powder coated, D19 J steel box. › Dimensions: 290x186x52mm.
Code No. Sockets 0
666009 FMT ITX19 T20 T25 T27 T30 T40 T45 T50TX19 E10 E11 E12 E14 E16 E18 E20 E24
1.100
Code No. Sockets 0
665991 FT TX19 E10 E11 E12 E14 E16 E18 E20 E24 0.510665994 SR-FT TX19 E10 E11 E12 E14 E16 E18 E20 E24
(Including Holding Rail and Adaptor)0.620
TORX® = Registered trademark of Acument Intellectual Properties, LLC. USA
TX19SOCKET SETS 1/2"
› Manually operated 1/2” sockets. › Supplied in blue powder coated, D30 K steel box. › Dimensions: 281x77x37mm. › Also available in a blister pack.
T !
TORX® = Registered trademark of Acument Intellectual Properties, LLC. USA
34
SOCKETS
Code No. 514640 D 19 J Box514632 D 19 K Box514667 D 19 T Box514675 D 19 Y Box515450 C 19 Y Insert515965 D 19 GM Insert515485 D 19 H Insert515975 D 19 IM Insert544191 D 19 J Insert515507 D 19 K Insert544213 D 19 T Insert515310 D 19 T 97 Insert515515 D 19/22 T Insert544221 D 19 Y Insert515337 D 19 YM1B Insert544205 D 19 1B Insert515353 D 19 62MU Insert515426 IN19 - 5D Insert515418 IN19 - 6 Insert544248 IN19 - 9 Insert515396 IN19PM - 10 Insert515876 ITX19 MT Insert515868 TX19 FT Insert515841 ITX/TX19 FM Insert515981 K19 Insert
SPARES
› Blue powder coated steel case. › Black matt-� nish insert.
19 REPAIR KITS
19 BOXES & INSERTS
› For the 1993Z ratchet and 1996/7 power bar.
Code No.
545694 1993 Z Repair Kit545708 1996/7 Repair Kit
T Ratchets (1/2")
1993 U-10 T REVERSIBLE RATCHET 1/2"
› For manually operated sockets and accessories with 1/2” square drive. › In accordance with SANS 1113 and DIN 3122. › With recessed lever change. › Push-button release. › Return angle of seven and a half degrees. › Non-slip 2-component handle. › Locks in the middle position: When the lever is �ipped,
it automatically engages for clockwise or anti-clockwise operation. › Chrome Vanadium steel 31CrV3. › Ball locking device.
Code No. a „ a A° y 0
614262 1993U-10T 1/2 12.5 7,5 270 0.584
1993 U-10 K PLASTIC RATCHET 1/2"
› Maximum torque: 70Nm. › For manually operated sockets and accessories with 1/2” square drive. › Return angle of seven and a half degrees. › Made from sturdy compound material with a steel mechanism. › Lightweight. › Dimensions: 44 x 145 x 42.2mm. › Reversible ratchet.
Code No. a „ a A° y 0
624489 1993U-10K 1/2 12.5 7,5 145 0.226
1993 U-3 REVERSIBLE RATCHET 1/2"
› For manually operated sockets and accessories with 1/2” square drive. › With recessed lever change. › Ball locking device. › Return angle of �ve degrees. › Non-slip 2-component handle. › In accordance with SANS 1113 and DIN 3122. › Chrome Vanadium steel 31CrV3.
Code No. a „ a A° y 0
614424 1993U-3 1/2 12.5 5 270 0.544
1993 Z-94 RATCHET HANDLE WITH COUPLER 1/2" › For manually operated sockets and accessorieswith 1/2” square drive. › With square coupler, medium-�ne toothed, extremely rugged › Return angle of seven and a half degrees. › Reversible ratchet. › Non-slip 2-component handle › In accordance with SANS 1113 and DIN 3122. › Chrome Vanadium steel 31CrV3.
Code No. a „ a A° y 0
614459 1993Z-94 1/2 12.5 7,5 270 0.430
35
3 3
Code ! y 0
612006 C19 8mm-5/16 38.0 0.056612014 C19 9mm-11/32 38.0 0.054612022 C19 10mm-3/8 38.0 0.055612030 C19 11mm 38.0 0.057612057 C19 12mm 38.0 0.058612065 C19 13mm-1/2 38.0 0.057612073 C19 14mm 38.0 0.059612081 C19 15mm-19/32 40.0 0.065612103 C19 16mm-5/8 40.0 0.065612111 C19 17mm 40.0 0.073612138 C19 18mm-11/16 40.0 0.062612146 C19 19mm-3/4 40.0 0.078612154 C19 20mm-25/32 40.0 0.084612162 C19 21mm-13/16 41.5 0.096612170 C19 22mm 41.5 0.099612189 C19 23mm 41.5 0.121612197 C19 24mm-15/16 41.5 0.124612200 C19 25mm 41.5 0.130612219 C19 26mm-1. 41.5 0.135612227 C19 27mm-1.1/16 41.5 0.145612235 C19 28mm 43.0 0.148612243 C19 29mm-1.1/8 43.0 0.159612251 C19 30mm-1.3/16 43.0 0.175612278 C19 32mm-1.1/4 43.0 0.189
612308 C19 7/16AF 38.0 0.056612324 C19 9/16AF 38.0 0.061612375 C19 7/8AF 41.5 0.105
Code ! y 0
613304 D19 8mm 38.0 0.056613312 D19 9mm 38.0 0.053613320 D19 10mm 38.0 0.055613339 D19 11mm 38.0 0.055613347 D19 12mm 38.0 0.057613355 D19 13mm 38.0 0.057613363 D19 14mm 38.0 0.061613371 D19 15mm 40.0 0.065613398 D19 16mm 40.0 0.072613401 D19 17mm 40.0 0.067613428 D19 18mm 40.0 0.065613436 D19 19mm 40.0 0.074613444 D19 20mm 40.0 0.088613452 D19 21mm 41.5 0.096613460 D19 22mm 41.5 0.100613479 D19 23mm 41.5 0.111613487 D19 24mm 41.5 0.122613495 D19 25mm 41.5 0.135613509 D19 26mm 41.5 0.140613517 D19 27mm 41.5 0.145613525 D19 28mm 43.0 0.167613533 D19 29mm 43.0 0.170613541 D19 30mm 43.0 0.190613576 D19 32mm 43.0 0.219613584 D19 33mm 44.5 0.250613568 D19 36mm 44.5 0.287
613606 D19 5/16AF 38.0 0.054613614 D19 11/32AF 38.0 0.051613622 D19 3/8AF 38.0 0.053613630 D19 13/32AF 38.0 0.054613649 D19 7/16AF 38.0 0.053613657 D19 1/2AF 38.0 0.055613665 D19 9/16AF 38.0 0.063613673 D19 19/32AF 40.0 0.065613681 D19 5/8AF 40.0 0.070613703 D19 11/16AF 40.0 0.062613711 D19 3/4AF 40.0 0.077613738 D19 25/32AF 40.0 0.082613746 D19 13/16AF 41.5 0.098613754 D19 7/8AF 41.5 0.100613762 D19 15/16AF 41.5 0.120613770 D19 1. AF 41.5 0.137613789 D19 1.1/16AF 41.5 0.145613797 D19 1.1/8AF 43.0 0.167613800 D19 1.3/16AF 43.0 0.190613819 D19 1.1/4AF 43.0 0.203
T
INK19 1/2“ IMPACT ALLEN KEY SOCKETS 53
36
SOCKETS
Sockets (1/2")
T C 19 (MM) / (AF)SOCKETS 1/2"C profile
› Manually operated sockets with thin walls and knurled base. › CHROME VANADIUM steel – 31CrV3. › Chrome plated and polished. › In accordance with SANS 1113 and DIN 3124.
T
D 19 (MM) / (AF)SOCKETS 1/2“bi-hexagon UD profile
› Manually operated sockets with thin walls and knurled base. › CHROME VANADIUM steel – 31CrV3. › Chrome plated and polished. › In accordance with SANS 1113 and DIN 3124.
K19 1/2“ IMPACT SOCKETS 53
Code ! y 0
615315 IN19 5mm 60 0.050615323 IN19 6mm 60 0.055615331 IN19 7mm 60 0.058615358 IN19 8mm 60 0.060615366 IN19 9mm 60 0.063615374 IN19 10mm 60 0.065615382 IN19 12mm 60 0.075615390 IN19 14mm 60 0.085615404 IN19 17mm 60 0.115615412 IN19 19mm 60 0.120
Code ! y 0
015705 D19L 10mm 82 0.095015706 D19L 12mm 82 0.120015701 D19L 13mm 82 0.100015702 D19L 14mm 82 0.130015707 D19L 15mm 82 0.130015712 D19L 16mm 82 0.140015703 D19L 17mm 82 0.150015708 D19L 18mm 82 0.180015704 D19L 19mm 82 0.190015709 D19L 21mm 82 0.210015713 D19L 22mm 82 0.210015710 D19L 24mm 82 0.260015711 D19L 27mm 82 0.310015714 D19L 30mm 82 0.300015715 D19L 32mm 82 0.400
Code ! y 0
614017 19L 13mm 77 0.102614025 19L 14mm 77 0.109614033 19L 17mm 77 0.134614041 19L 19mm 82 0.171614068 19L 21mm 82 0.205614076 19L 24mm 82 0.250
614130 19L 1/2AF 77 0.96614149 19L 9/16AF 77 0.110614157 19L 5/8AF 77 0.130614165 19L 11/16AF 77 0.143614173 19L 3/4AF 82 0.173614181 19L 13/16AF 82 0.210614203 19L 7/8AF 82 0.213614211 19L 15/16AF 82 0.233
19L (MM) / (AF) SOCKETS 1/2"hexagon, long pattern
T
› Manually operated sockets with knurled base. › For hexagon head screws. › 1/2” square drive. › Bits: Chrome Vanadium steel 59CrV4. › Sockets: Chrome Vanadium steel 31CrV3.
IN 19 (MM) / (AF) ALLEN KEY SOCKETS 1/2"for hexagon screws
Code ! y 0
615471 IN19 3/16AF 60 0.050615498 IN19 7/32AF 60 0.053615501 IN19 1/4AF 60 0.055615528 IN19 9/32AF 60 0.055615536 IN19 5/16AF 60 0.060615544 IN19 3/8AF 60 0.065615552 IN19 1/2AF 60 0.080615560 IN19 9/16AF 60 0.085615579 IN19 5/8AF 60 0.115
T
37
T
› Manually operated sockets with thin walls and knurled base. › Chrome Vanadium steel 31CrV3. › 1/2” square drive. › Chrome plated and polished.
D19L (MM) SOCKETS 1/2"bi-hexagon UD profile, long pattern
T
› Manually operated sockets with thin walls and knurled base. › Chrome Vanadium steel 31CrV3. › 1/2” square drive. › Chrome plated and polished.
Code ! y 0
6162060 IN19L 5-90 90 0.091615730 IN19L 6-100 100 0.0796157570 IN19L 7-100 100 0.089615773 IN19L 8-100 100 0.097615811 IN19L 10-100 100 0.124615846 IN19L 12-100 100 0.151615862 IN19L 14-100 100 0.202616265 IN19L 1/4-100 100 0.081616303 IN19L 5/16-100 100 0.097616346 IN19L 3/8-100 100 0.119616370 IN19L 1/2-100 100 0.161616397 IN19L 9/16-100 100 0.207
Code ! y 0
1449826 INR 19L 5-100 100 0.0851449850 INR 19L 6-100 100 0.0851449877 INR 19L 8-100 100 0.0851449591 INR 19L 10-100 100 0.1051398636 INR 19L 12-100 100 0.1451449893 INR 19L 14-100 100 0.155
› Manually operated sockets with knurled base. › For hexagon head screws. › 1/2” square drive. › Bits: Chrome Vanadium steel 59CrV4. › Sockets: Chrome Vanadium steel – 31CrV3.
T
› Manually operated sockets with knurled base. › For hexagon head screws. › 1/2” square drive. › Bits: Chrome Vanadium steel 59CrV4. › Sockets: Chrome Vanadium steel 31CrV3.
T
› Manually operated sockets with knurled base. › Chrome Vanadium steel 31CrV3. › 1/2” square drive. › Bits: Molybdenum tool steel.
T
› Chrome Vanadium steel 31CrV3. › 1/2” square drive. › Manually operated sockets with knurled base. › Bits: Molybdenum tool steel.
T
INR 19 L SCREWDRIVER BIT SOCKETS 1/2"for multi-spline screws RIBE®, long pattern
IN 19 L ALLEN KEY SOCKETS 1/2"for hexagon screws, long pattern
INX 19-INX 19L SCREWDRIVER BIT SOCKETS 1/2"for multi-point screws XZN
ITX 19 TORX® BIT SOCKETS 1/2"male TORX®
TORX® = Registered trademark of Acument Intellectual Properties, LLC. USA.
Code !
+ y 0
024710 ITX19 T 20 T20 M4-M5 3.86 55 0.068024720 ITX19 T 25 T25 M4,5-M5 4.43 55 0.070024730 ITX19 T 27 T27 M4.5-M6 4.99 55 0.070024740 ITX19 T 30 T30 M6-M7 5.52 55 0.070024750 ITX19 T 40 T40 M7-M8 6.65 55 0.075024760 ITX19 T 45 T45 M8-M10 7.82 55 0.070024770 ITX19 T 50 T50 M10 8.83 55 0.075024780 ITX19 T 55 T55 M12 11.22 55 0.100024790 ITX19 T 60 T60 M14 13.25 55 0.110
Code ! + y 0
615889 INX19 5mm M5 55 0.068615900 INX19 6mm M6 55 0.076615927 INX19 8mm M8 55 0.077615943 INX19 10mm M10 55 0.094615978 INX19 12mm M12 55 0.110615919 INX19L 6-100 M6 100 0.093615935 INX19L 8-100 M8 100 0.097615951 INX19L 10-100 M10 100 0.124615986 INX19L 12-100 M12 100 0.1491888951 INX19L 14-100 M14 100 0.110
RIBE® = Registered trademark of Richard Bergner, GmbH & Co. KG, Schwabach, Germany.
T
38
SOCKETS
IKS 19 SCREWDRIVER BIT SOCKETS 1/2"for cross-head screws PH
ITX 19 L TORX® BIT SOCKETS 1/2"male TORX®, long pattern
TX 19 TORX® SOCKETS 1/2"female TORX®
ITX 19 B TORX® BIT SOCKETS 1/2"male TORX® head screws with pilot
› Manually operated sockets with thin walls and knurled base. › Chrome Vanadium steel 31CrV3. › 1/2” square drive. › Chrome plated.
› Manually operated sockets with knurled base. › 1/2” square drive. › Sockets: Chrome Vanadium steel 31CrV3. › Bits: Molybdenum tool steel. › Socket with Phillips & POZZIDRIV® Bits
› Manually operated sockets with knurled base. › Chrome Vanadium steel 31CrV3. › Bits: Molybdenum tool steel. › 1/2” square drive. › Tamper proof.
› Manually operated sockets with knurled base. › 1/2” square drive. › Chrome Vanadium steel 31CrV3. › Bits: Molybdenum tool steel.
T
T
T
T
Code NO. 9 + y 0
665908 TX19 E 10 E10 M8 9.42 38.0 0.055665916 TX19 E 11 E11 - 10.08 38.0 0.055665924 TX19 E 12 E12 M10 11.17 38.0 0.055665932 TX19 E 14 E14 M12 12.90 38.0 0.055665940 TX19 E 16 E16 M12 14.76 38.0 0.060665959 TX19 E 18 E18 M14 16.70 40.0 0.080665967 TX19 E 20 E20 M6 18.45 40.0 0.085665975 TX19 E 24 E24 M18-M20 22.16 41.5 0.115
Code ! 9 + & y 0
024210 ITX19L T20 T20 M4-M5 3.86 100 0.095024215 ITX19L T25 T25 M4.5-M5 4.43 100 0.095024220 ITX19L T27 T27 M4.5-M6 4.99 100 0.096024225 ITX19L T30 T30 M6-M7 5.52 100 0.096024230 ITX19L T40 T40 M7-M8 6.65 100 0.096024235 ITX19L T45 T45 M8-M10 7.82 100 0.098024240 ITX19L T50 T50 M10 8.83 100 0.124024245 ITX19L T55 T55 M12 11.22 100 0.151024250 ITX19L T60 T60 M14 13.25 100 0.197024253 ITX19L T70 T70 M16 15.55 100 0.277
Code ! y 0
665665 IKS19 NO. 2 60 0.075665673 IKS19 NO. 3 60 0.080665711 IKS19 PZD 2 60 0.070665738 IKS19 PZD 3 60 0.080
T
TORX® = Registered trademark of Acument Intellectual Properties, LLC. USA.
TORX® = Registered trademark of Acument Intellectual Properties, LLC. USA. TORX® = Registered trademark of Acument Intellectual Properties, LLC. USA.
39
Code !
8 + y 0
6192720 ITX19B T20* T20 M4-M5 3.86 55 0.0756195660 ITX19B T25* T25 M4,5-M5 4.43 55 0.0756196390 ITX19B T27* T27 M4,5-M6 4.99 55 0.0766200170 ITX19B T30 T30 M6-M7 5.52 55 0.0766200410 ITX19B T40 T40 M7-M8 6.65 55 0.091
*WHILE STOCKS LAST
Accessories (1/2")
Code No. a „ a y 0
614335 1985 1/2 12.5 420 0.585
Code No. a „ a y 0
614483 1996 1/2 12.5 255 0.414614491 1997/375 1/2 12.5 375 0.576614556 1997/450 1/2 12.5 450 0.677
Code No. Q „
Q a „
a y 0
6143000 1930 1/2 12,5 3/8 10 39 0.062
1/2“ 3/8“12,5 mm 10 mm
1930 REDUCER 1/2" TO 3/8"
› For manually operated sockets and accessories with 1/2” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3123.
3/4“1/2“20 mm12,5 mm
1932 CONVERTER 1/2" TO 3/4"
› For manually operated sockets and accessories with 1/2” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3123.
Code No. a „
a Q „
Q y 0
614319 1932 3/4 20 1/2 12.5 45 0.124
1985 SPEED BRACE HANDLE 1/2"
› For manually operated sockets and accessories with 1/2” square drive. › Chrome Vanadium steel 31CrV3.
1996 - 1997 SWIVEL HANDLES 1/2"
› For manually operated sockets and accessories with 1/2” square drive. › Non-slip 2-component handle. › In accordance with SANS 1113 and DIN 3122. › Chrome Vanadium steel 31CrV3.
1997
1996
T
40
SOCKETS
Code No. a „ a y 0
614378 1990/75 1/2 12.5 75 0.109614386 1990/125 1/2 12.5 125 0.177614289 1990/175 1/2 12.5 175 0.239614394 1990/250 1/2 12.5 250 0.337
› For manually operated sockets and accessories with 1/2” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3123. › For manually operated sockets and accessories with 1/2” square drive and ball locking device.
› Strong magnet securely �xes even large screws in the socket. › Makes work easier particularly in con�ned spaces. › One-hand operation. › Chrome Vanadium steel 31CrV3. › In accordance with DIN 3120. › Hot forged.
Code No. a „
a Q „
Q y 0
614475 1995 1/2 12.5 1/2 12.5 70 0.149Code No. a
„a y 0
2697920 1990M * 1/2 12.5 83 0.110
› For manually operated sockets and accessories with 1/2” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3123.
› For manually operated sockets and accessories with 1/2” square drive. › Chrome Vanadium steel 31CrV3.
Code No. a „
a y 0
614343 1987 1/2 12.5 290 0.350Code No. a
„a y 0
6144670 1994 Coupler 1/2 12.5 37 0.042614467 1994 PZK* 1/2 12.5 46 0.056
1990-75
1990-125
1990-2501990-175
1990 EXTENSION BARS 1/2"
› For manually operated sockets and accessories with 1/2” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3123.
1995 UNIVERSAL JOINT 1/2"
1990 M EXTENSION 1/2"with magnet
1987 SLIDING T-BAR 1/2"
1994 COUPLERS 1/2"
T
*WHILE STOCKS LAST
41
*WITH MUSHROOM HEAD
32 EMAZ/ EMZ / EAZSOCKET SETS 3/4"
› Manually operated 3/4” sockets and accessories. › Supplied in blue powder coated D32 E steel box. › Dimensions: 526x190x75mm.
Code No. Ratchet Sockets Accessories 0
626546 C32 EMAU-2 " 3293 U-2 C32 27-1.1/16 29-1.1/8 32-1.1/4 33-1.5/16 36-1.7/16 38-1.1/2 41-1.5/8 46-1.13/16 50-2. 1.3/8
+ 3287 3290-200 3290-400
11.600
628042 D32 EMU-2 " 3293 U-2 D32 22 24 27 30 32 36 38 41 46 50
+ 3287 3290-200 3290-400
11.230
628069 D32 EAU-2 * " 3293 U-2 D32 7/8 15/16 1.1/16 1.1/4 1.5/16 1.3/8 1.7/16 1.5/8 1.13/16 2.
+ 3287 3290-200 3290-400
11.400
32 EMAU-2 / EMU-2SOCKET SETS 3/4"
e !
e !
› Manually operated 3/4” sockets and accessories. › Supplied in blue powder coated D32 E steel box. › Dimensions: 526x190x75mm.
Code No. Ratchet Sockets Accessories 0
626538 C32 EMAZ ! 3293 Z-94 C32 27-1.1/16 29-1.1/8 32-1.1/4 33-1.5/16 36-1.7/16 38-1.1/2 41-1.5/8 46-1.13/16 50-2. 1.3/8
+ 3287 3290-200 3290-400
11.430
628026 D32 EMZ ! 3293 Z-94 D32 22 24 27 30 32 36 38 41 46 50
+ 3287 3290-200 3290-400
11.060
628050 D32 EAZ ! 3293 Z-94 D32 7/8 15/16 1.1/16 1.1/4 1.5/16 1.3/8 1.7/16 1.5/8 1.13/16 2.
+ 3287 3290-200 3290-400
11.220
(3/4") Square Drive
Sets (3/4")
U
*WHILE STOCKS LAST
42
SOCKETS
Ratchets (3/4")
Code No. a „ a A° y 0
627798 3293 U-1 3/4 20 11,25 500 2.590627984 3293 U-1/440 3/4 20 11,25 440 2.380
› For manually operated sockets and accessories with 3/4” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3122. › With lever control and detachable handle.
Code No. a „ a A° y 0
627860 3293 U-2 3/4 20 7,2 500 1.470
› For manually operated sockets and accessories with 3/4” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3122.
Code No. a „ a A° y 0
627895 3293 Z-94 3/4 20 10 500 1.300
› For manually operated sockets and accessories with 3/4” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3122.
Code Reversible Ratchet Sockets Accessories 0
628073 " 3293 U-2 D32 22 24 27 29 30 32 36 38 41 46 50mm 7/8 15/16 1.1/16 1.1/4 1.5/16 1.3/8 1.7/16 1.5/8 1.13/16 2
+ 3287 3290-200 3290-400
14.100
D32 NZU-Z SOCKET SET 3/4"
› Manually operated 3/4” sockets and accessories. › Supplied in blue powder coated steel box. › Sturdy carrying handles.
3293 Z-94 RATCHET HANDLE WITH COUPLER 3/4"
3293 U-2 REVERSIBLE RATCHET 3/4"
3293 U-1 REVERSIBLE RATCHETS WITH LEVER CONTROL 3/4"
U
43
NEW
Code ! y 0
626007 C32 19mm-3/4 51.5 0.208626015 C32 22mm-7/8 51.5 0.211626023 C32 24mm-15/16 51.5 0.221626058 C32 26 mm-1. 51.5 0.220626066 C32 27mm-1.1/16 54.5 0.243626074 C32 29mm-1.1/8 54.5 0.261626082 C32 30mm-1.3/16 57.5 0.303626090 C32 32mm-1.1/4 57.5 0.343626104 C32 33mm-1.5/16 57.5 0.350626112 C32 34mm 57.5 0.380626171 C32 36mm-1.7/16 59.5 0.413626201 C32 38mm-1.1/2 59.5 0.440626228 C32 41mm-1.5/8 62.5 0.550626244 C32 46mm-1.13/16 65.5 0.690626260 C32 50mm-2. 68.5 0.840
626279 C32 1.3/8AF 59.5 0.402
Code ! y 0
627216 D32 19mm 51.5 0.208627224 D32 22mm 51.5 0.211627232 D32 24mm 51.5 0.221627240 D32 27mm 54.5 0.243627259 D32 29mm 54.5 0.261627267 D32 30mm 57.5 0.303627275 D32 32mm 57.5 0.343627704 D32 33mm 57.5 0.350627763 D32 34mm 57.5 0.380627283 D32 36mm 59.5 0.413627291 D32 38mm 59.5 0.439627305 D32 41mm 62.5 0.551627313 D32 46mm 65.5 0.690627321 D32 50mm 68.5 0.780
627402 D32 7/8AF 51.5 0.212627410 D32 15/16AF 51.5 0.222627429 D32 1. AF 51.5 0.220627437 D32 1.1/16AF 54.5 0.250627445 D32 1.1/8AF 54.5 0.240627399 D32 1.3/16AF 58.0 0.306627453 D32 1.1/4AF 57.5 0.331627461 D32 1.5/16AF 57.5 0.370627488 D32 1.3/8AF 59.5 0.402627496 D32 1.7/16AF 59.5 0.440627518 D32 1.1/2AF 59.5 0.435627526 D32 1.5/8AF 62.5 0.551627534 D32 1.11/16AF 62.5 0.600627542 D32 1.3/4AF 65.5 0.550627550 D32 1.13/16AF 65.5 0.690627569 D32 1.7/8AF 65.5 0.765627577 D32 2.AF 68.5 0.840
Code No. a „ a A° y 0
627127 3293/500 3/4 20 15 625 3.080627194 3293/500 24x30 3/4 20 15 650 2.940
› For manually operated sockets and accessories with 3/4” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3122. › 500 DJ with double 3/4” drive coupler and 500mm detachable handle. › 500 DJ24x30 with 24mm and 30mm � xed sockets and 500mm detachable handle.
3293/500 DJ/DJ 24X34DOUBLE JOHNNY RATCHETS 3/4"
3293/500
3293/500-24x30
U
K32 3/4“ IMPACT SOCKETS 55
44
SOCKETS
Sockets (3/4")
C 32 (MM) / (AF)SOCKETS 3/4"C profile
› Manually operated sockets with thin walls and knurled base. › Chrome Vanadium steel 31CrV3. › Chrome plated. › In accordance with SANS 1113 and DIN 3124.
D 32 (MM) / (AF)SOCKETS 3/4“bi-hexagon UD profile
› Manually operated sockets with thin walls and knurled base. › Chrome Vanadium steel 31CrV3. › Chrome plated. › In accordance with SANS 1113 and DIN 3124.
U
U
Accessories (3/4")
U
IN32 14mm
IN32 22mm
IN 32 SCREWDRIVER BIT SOCKETS 3/4"for hexagon head screws
› Manually operated sockets with knurled base. › 3/4” square drive. › Sockets: Chrome Vanadium steel 31CrV3. › Bits: Chrome Vanadium steel 59CrV4.
Code No. $ y 0
6275850 IN32 14mm 14 80 0.3526275930 IN32 17mm 17 80 0.394
Code No. $ y 0
6276070 IN32 19mm 19 80 0.4336276150 IN32 22mm 22 80 0.482
3296 SWIVEL HANDLE 3/4"
› For manually operated sockets and accessories with 3/4” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3122.
3287 SLIDING T BARS 3/4"
Code No. a „ a y 0
627925 3296 3/4 20 547 1.900
Code No. a „ a y 0
627836 3287 3/4 20 500 0.118627941 3287/447 3/4 20 447 0.107
› For manually operated sockets and accessories with 3/4” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3122.
3290-200
3290 EXTENSIONS 3/4"
Code No. a „ a y 0
627844 3290/200 3/4 20 200 0.555627852 3290/400 3/4 20 400 1.058
› For manually operated sockets and accessories with 3/4” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3122.
U
45
3/4“ 1/2“20 mm 12,5 mm
1“3/4“25 mm20 mm
3219 REDUCER 3/4" TO 1/2"
3221 CONVERTER 3/4" TO 1"
› For manually operated sockets and accessories with 3/4” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3122.
› For manually operated sockets and accessories with 3/4” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3122.
Code No. a „
a Q „
Q y 0
017100 3219 1/2 12,5 3/4 20 56 0.160Code No. a
„a Q
„Q y 0
627828 3221 1 25 3/4 20 60 0.338
Code No. a „
a Q „
Q y 0
017170 3295 3/4 20 3/4 20 105 0.580Code No. a
„a y 0
627909 3294 3/4 20 52 0.133
U
46
SOCKETS
3295 UNIVERSAL JOINT 3/4"
3294 COUPLER 3/4"
› For manually operated sockets and accessories with 3/4” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3123.
› For manually operated sockets and accessories with 3/4” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3122.
SPARES
› Blue powder coated steel case. › Black matt-�nish insert.
32 REPAIR KITS 19 BOXES & INSERTS
› For the 3293 range of ratchets and 3296 power bar.
Code No.
541036 3293 U-I Repair Kit545716 3293 U-2 Repair Kit545724 3293 Z Repair Kit627135 3293 DJ Repair Kit545740 3296 Repair Kit
Code No.
514683 D32 E Box544256 D32 Insert545228 C32 EMAZ Insert
f !
D 21 EMU-10SOCKET SET 1"15 pieces
› Manually operated 1” sockets and accessories. › Gedore Vanadium steel 31CrV3. › With reversible lever change ratchet. › Supplied in blue powder coated steel case. › Dimensions: 760 x 160 x 105mm.
Code No. Ratchet Sockets Accessories 0
018250 D 21 EMU JG $ 2193 U-3 3 D 21 36 41 46 50 55 60 65 70 75 80
2190 -16 Extension 2190 -8 Extension
+ 2187 Sliding T-Bar
27.600
2193 U-3REVERSIBLE RATCHET 1" › In accordance with SANS 1113 and DIN 3122. › Chrome Vanadium steel 31CrV3. › With non-slip metal disc change, � ne-toothed
(72 teeth) and robust. › Return angle 5 degrees. › Push-� t tube handle. › For manually operated sockets and accessories
with 1” square drive.
2193 Z-94RATCHET HANDLE WITH COUPLER 1"
Code No. a „ a A° y 0
018240 2193 U-3 1 25 5 720 4.500
Code No. a „ a A° y 0
6181520 2193 Z-94 1 25 9 720 4.200
› In accordance with SANS 1113 and DIN 3122. › Chrome Vanadium steel 31CrV3. › With non-slip metal disc change, � ne-toothed
(72 teeth) and robust. › Return angle of nine degrees. › Push-� t tube handle. › For manually operated sockets and accessories
with 1” square drive.
47
(1") Square Drive
Sets (1")
V
36-65mm
70-80mm
Code ! y 0
018001 D21 36mm 70 0.600018002 D21 41mm 70 0.700018003 D21 46mm 75 0.900018004 D21 50mm 75 1.000018005 D21 55mm 75 1.100
V
Sockets (1")
D 21/21 (MM)SOCKETS 1"C profile
› Manually operated sockets with knurled base. › 1” square drive. › Gedore Vanadium steel 31CrV3. › Chrome plated. › In accordance with SANS 1113 and DIN 3124.
Code ! y 0
018006 D21 60mm 80 1.200018011 D21 65mm 84 1.670018008 21 70mm - Hexagon 70 0.600018009 21 75mm - Hexagon 70 0.700018010 21 80mm - Hexagon 75 0.900
2187SLIDING T-BAR 1" › For manually operated sockets and accessories with 1” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3122.
Code No. a „
a y 0
018210 2187 1 25 640 3.100
Accessories (1")
48
SOCKETS V
1“ IMPACT ACCESSORIES 58 1“ IMPACT SOCKET SET 57
1“ 3/4“25 mm 20 mm
2190-16
2190 EXTENSIONS 1"
2195 UNIVERSAL JOINT 1"
2194 COUPLER 1"
2132 REDUCER 1" TO 3/4"
2190-8
Code No. a „ a y 0
018220 2190-8“ 1 25 200 1.100018230 2190-16“ 1 25 400 1.900
› For manually operated sockets and accessories with 1” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3122.
› For manually operated sockets and accessories with 1” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3123.
Code No. a „
a Q „
Q y 0
018200 2132 3/4 25 1 20 75 0.500
› For manually operated sockets and accessories with 1” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3123.
› For manually operated sockets and accessories with 1” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3122.
Code No. a „
a y 0
6180710 2194 1 25 68 0.321Code No. a
„a Q
„Q y 0
6180980 2195 1 25 1 25 140 1.480
49
V
IMPACT SOCKETS, SETS
ACCESSORIES
(1/2”) SOCKETS
53
(3/4”) SOCKETS
55
(1”) ACCESSORIES
58
(1/2”) SETS
52
(3/4”) ACCESSORIES
56
(1.1/2”) SOCKETS
59
(1/2”) ACCESSORIES
53
(1”) SOCKETS
57
(1.1/2”) ACCESSORIES
59
Impact Tools
(1/2") square drive
T
K 19-5IMPACT SOCKET SET 1/2"
› 5 impact sockets, machine-operated, suitable for all standard electric and air tools. › 1/2” square drive. › Supplied in blue powder coated D19 steel box. › Dimensions: 281x77x46mm.
Code No. Sockets Extension 0
1646923 K19-5 1 K19 10 13 14 17 24 KB1990-125 0.95
T R
T
K 1900IMPACT DRIVER SETS 1/2"
› For use on screws and bolts with slotted, cross-slotted or hexagon heads. › Supplied in blue sheetmetal case with black plastic insert. › Dimensions: 281x79x42mm.
Code No. Sockets Accessories 0
025490 K1900-613 4 6 7 8 K1900 1.22 1 2 3 2,5 3 4 5
025491 K1900-813 7 8 9 12 K1900 1.22 2 3 4 5 6 8 10
NEW NEWK19-14IMPACT SOCKET SET 1/2"
› 14 impact sockets, suitable for all standard electric and air tools. › 1/2” square drive. › Supplied in blue powder coated steel box.
Code No. Sockets 0
1646928 K19-14 1 K19 10 11 12 13 14 16 17 18 19 21 22 23 24 27Code No. Sockets Extension 0
1646930 K19-17 1 K19 10 11 12 13 14 16 17 18 19 21 22 23 24 27
KB1990-125KB1970/75 8-14mm safety ring & pinKB1970/75 15-32mm safety ring & pin
K19-17IMPACT SOCKET SET 1/2"
› 1/2“ square drive. › Machine-operated, suitable for all standard electric and air tools › In accordance with DIN 3129. › GEDORE special steel, manganese phosphated. › Supplied in blue powder coated steel box.
*WHILE STOCKS LAST *WHILE STOCKS LAST
52
IMPACT TOOLS
T
Code ! Recommended Accessories y 0
6224190 IN K19 8mm KB1970 10-14, KB1975 10-14 44 0.0936224270 IN K19 10mm KB1970 10-14, KB1975 10-14 44 0.1046224350 IN K19 12mm KB1970 15-27, KB1975 15-27 50 0.1306225320 IN K19 14mm KB1970 15-27, KB1975 15-27 50 0.1486225670 IN K19 17mm KB1970 15-27, KB1975 15-27 50 0.1896225675 IN K19 19mm KB1970 15-27, KB1975 15-27 50 0.214
IN K 19 IMPACT ALLEN KEY SOCKETS 1/2"for in-hex screws
› 1/2“ square drive. › Machine-operated, suitable for all standard electric and air tools. › In accordance with DIN 3121. › GEDORE special steel, manganese phosphated.
KB 1932 CONVERTER 1/2" TO 3/4"for impact sockets
› With square drive as per DIN 3121.
3/4“1/2“20 mm12,5 mm
Code No. a „
a Q „
Q y 0
6650020 KB1932 3/4 20 1/2 12.5 48 0.159
Code ! Recommended Accessories y 0
6160280 K19 10mm KB1970 10-14, KB1975 10-14 38 0.0826160360 K19 11mm KB1970 10-14, KB1975 10-14 38 0.0856160440 K19 12mm KB1970 10-14, KB1975 10-14 38 0.0846160520 K19 13mm KB1970 10-14, KB1975 10-14 38 0.0816160600 K19 14mm KB1970 10-14, KB1975 10-14 38 0.0826160790 K19 16mm KB1970 15-27, KB1975 15-27 38 0.1246160870 K19 17mm KB1970 15-27, KB1975 15-27 38 0.1236160950 K19 18mm KB1970 15-27, KB1975 15-27 38 0.1226161090 K19 19mm KB1970 15-27, KB1975 15-27 38 0.1196161170 K19 21mm KB1970 15-27, KB1975 15-27 38 0.1376161250 K19 22mm KB1970 15-27, KB1975 15-27 38 0.1426161330 K19 23mm KB1970 15-27, KB1975 15-27 38 0.1486161410 K19 24mm KB1970 15-27, KB1975 15-27 45 0.1546182680 K19 27mm KB1970 15-27, KB1975 15-27 50 0.1806182720 K19 28mm KB1970 15-27, KB1975 15-27 50 0.1836182880 K19 29mm KB1970 15-27, KB1975 15-27 50 0.1881560557 K19 30mm KB1970 15-27, KB1975 15-27 50 0.2561783742 K19 32mm KB1970 15-27, KB1975 15-27 50 0.286
K 19 (MM) IMPACT SOCKETS 1/2"hexagon
› 1/2“ square drive. › Machine-operated, suitable for all standard electric and air tools › In accordance with DIN 3129. › GEDORE special steel, manganese phosphated.
T K 19 L IMPACT SOCKETS 1/2"hexagon, long pattern
› 1/2“ square drive. › Machine-operated, suitable for all standard electric and air tools. › In accordance with DIN 3129. › GEDORE special steel, manganese phosphated.
T
Code ! Recommended Accessories y 0
6163380 K19L 10mm KB1970 10-14, KB1975 10-14 77 0.1406163381 K19L 11mm KB1970 10-14, KB1975 10-14 77 0.1336163400 K19L 12mm KB1970 10-14, KB1975 10-14 77 0.1406163540 K19L 13mm KB1970 10-14, KB1975 10-14 77 0.1506163620 K19L 14mm KB1970 10-14, KB1975 10-14 77 0.1546197790 K19L 16mm KB1970 15-27, KB1975 15-27 77 0.1726163890 K19L 17mm KB1970 15-27, KB1975 15-27 80 0.2006197870 K19L 18mm KB1970 15-27, KB1975 15-27 82 0.2156164000 K19L 19mm KB1970 15-27, KB1975 15-27 82 0.2256162730 K19L 21mm KB1970 15-27, KB1975 15-27 82 0.2436164270 K19L 22mm KB1970 15-27, KB1975 15-27 82 0.2906199810 K19L 23mm KB1970 15-27, KB1975 15-27 82 0.2926164430 K19L 24mm KB1970 15-27, KB1975 15-27 82 0.3146164780 K19L 27mm KB1970 15-27, KB1975 15-27 82 0.3896184270 K19L 30mm KB1970 15-27, KB1975 15-27 82 0.453
53
(3/4") square drive
KB 1990 EXTENSIONS 1/2"for impact sockets
› For impact sockets and accessories with 1/2” square drive.
KB 1995 UNIVERSAL JOINT 1/2"for impact sockets
› For air tool operated impact sockets and accessories with 1/2” square drive.
Code No. a „ a y 0
6655100 KB1990/75 1/2 12.5 75 0.1436655250 KB1990/125 1/2 12.5 125 0.226
Code No. a „
a Q „
Q y 0
6655410 KB1995 1/2 12.5 1/2 12.5 62 0.202
Code No. y 0
024010 KB1900 123 0.580
KB 1900 IMPACT DRIVER 1/2"
› For impact sockets and accessories with 1/2” square drive.
KB 1970 - KB 1975 SAFETY RING AND PINfor impact sockets 1/2"
Code No. 0
6654790 KB1970/75 8-14mm 26654870 KB1970/75 15-32mm 2
NEW
Code No. Sockets Extension 0
6289995 K32-18 1 K32 17 18 19 21 22 23 24 27 28 29 30 32 33 34 36 38 40 41
KB3270/75 17-50mm safety ring & pinKB3270/75 52-60mm safety ring & pin
K32-18 IMPACT SOCKET SET 3/4"
› 3/4“ square drive. › Machine-operated, suitable for all standard electric and air tools. › In accordance with DIN 3129. › GEDORE special steel, manganese phosphated. › Supplied in blue powder coated steel box.
T
54
IMPACT TOOLS
Code ! Recommended Accessories y 0
6283600 K32L 17mm KB3270, KB3275 90 0.4906283790 K32L 19mm KB3270, KB3275 90 0.5106283870 K32L 22mm KB3270, KB3275 90 0.5606283950 K32L 24mm KB3270, KB3275 90 0.5806284090 K32L 27mm KB3270, KB3275 90 0.6306284170 K32L 30mm KB3270, KB3275 90 0.7006284250 K32L 32mm KB3270, KB3275 90 0.7406286540 K32L 33mm KB3270, KB3275 90 0.7706281660 K32L 34mm KB3270, KB3275 90 0.8006284330 K32L 36mm KB3270, KB3275 90 0.8506284332 K32L 38mm KB3270, KB3275 90 0.8806286890 K32L 41mm KB3270, KB3275 90 0.9506284336 K32L 46mm KB3270, KB3275 90 1.080
Code ! Recommended Accessories y 0
6282040 K32 17mm KB3270, KB3275 45 0.3306289990 K32 18mm KB3270, KB3275 45 0.3306282120 K32 19mm KB3270, KB3275 45 0.3316282190 K32 21mm KB3270, KB3275 46 0.3406282200 K32 22mm KB3270, KB3275 46 0.3336282210 K32 23mm KB3270, KB3275 46 0.3606282390 K32 24mm KB3270, KB3275 46 0.3496282470 K32 27mm KB3270, KB3275 48 0.3676282474 K32 28mm KB3270, KB3275 48 0.3796282476 K32 29mm KB3270, KB3275 48 0.3846282550 K32 30mm KB3270, KB3275 52 0.3956282630 K32 32mm KB3270, KB3275 52 0.4456283010 K32 33mm KB3270, KB3275 55 0.475
Code ! Recommended Accessories y 0
1956477 INK32 14mm KB3270, KB3275 59 0.4081956485 INK32 17mm KB3270, KB3275 62 0.4451956493 INK32 19mm KB3270, KB3275 64 0.4671956507 INK32 22mm KB3270, KB3275 67 0.5201956515 INK32 24mm KB3270, KB3275 67 0.555
› 3/4“ square drive. › Machine-operated, suitable for all standard electric and air tools. › In accordance with DIN 3129. › GEDORE special steel, manganese phosphated.
K 32 (MM) IMPACT SOCKETS 3/4"hexagon
U
Code ! Recommended Accessories y 0
6281580 K32 34mm KB3270, KB3275 55 0.4756282710 K32 36mm KB3270, KB3275 56 0.4826281740 K32 38mm KB3270, KB3275 59 0.5176282970 K32 40mm KB3270, KB3275 59 0.5606282980 K32 41mm KB3270, KB3275 59 0.5616282982 K32 42mm KB3270, KB3275 58 0.5826282984 K32 44mm KB3270, KB3275 62 0.6976282986 K32 46mm KB3270, KB3275 62 0.7036282988 K32 47mm KB3270, KB3275 68 0.8106282990 K32 48mm KB3270, KB3275 68 0.8276282992 K32 50mm KB3270, KB3275 68 0.8316282994 K32 55mm KB3270, KB3275 72 1.1496282996 K32 60mm KB3270, KB3275 75 1.5006282998 K32 65mm KB3270, KB3275 78 1.800
K 32 L IMPACT SOCKETS 3/4"hexagon, long pattern
› 3/4” square drive. › With square drive as per DIN 3129.
INK32 IMPACT ALLEN KEY SOCKETS 3/4"for in-hex screws
› Machine-operated, suitable for all standard electric and air tools. › With square drive as per DIN 3121.
U
55
KB 3270 - KB 3275 SAFETY RING AND PINfor impact sockets 3/4"
Code No. 0
6675441 KB3270/75 17-50mm 0.026675444 KB3270/75 52-60mm 0.02
KB 3221 CONVERTER 3/4" TO 1"for impact sockets
› With square drive as per DIN 3121.
Code No. a „
a Q „
Q y 0
6671530 KB3221 1 25 3/4 20 65 0.445
1“3/4“25 mm20 mm
KB 3295 UNIVERSAL JOINT 3/4"for impact sockets
› For impact sockets and accessories with 3/4” square drive.
Code No. a „
a Q „
Q y 0
6676090 KB3295 3/4“ 20 3/4 20 94 0.623
KB 3219 REDUCER 3/4" TO 1/2"for impact sockets
› With square drive as per DIN 3121. › GEDORE special steel, manganese-phosphated.
3/4“ 1/2“20 mm 12,5 mm
Code No. a „
a Q „
Q y 0
6675280 KB3219 1/2“ 12,5 3/4 20 65 0.351
KB 3290 EXTENSIONS 3/4"for impact sockets
› For impact sockets and accessories with 3/4” square drive.
Code No. a „ a y 0
6675550 KB3290/175 3/4 20 175 0.8876675650 KB3290/250 3/4 20 250 0.9176675790 KB3290/12“ 3/4 20 300 1.300
KB 3290-175 KB 3290-250 KB 3290-300
U
56
IMPACT TOOLS
Code ! Recommended Accessories y 0
6183060 K21 22mm KB 2170, KB 2175 55 0.5466183140 K21 24mm KB 2170, KB 2175 55 0.5616183220 K21 27mm KB 2170, KB 2175 55 0. 5936183290 K21 29mm KB 2170, KB 2175 56 0. 6436183300 K21 30mm KB 2170, KB 2175 57 0. 6366183490 K21 32mm KB 2170, KB 2175 57 0. 6496183650 K21 33mm KB 2170, KB 2175 57 1.0016196980 K21 34mm KB 2170, KB 2175 60 0. 7336183570 K21 36mm KB 2170, KB 2175 60 0. 7816184890 K21 38mm KB 2170, KB 2175 62 0. 8586183730 K21 41mm KB 2170, KB 2175 64 0. 8306184970 K21 42mm KB 2170, KB 2175 64 0. 9006183810 K21 46mm KB 2170, KB 2175 69 1.0546183820 K21 47mm KB 2170, KB 2175 70 1.1206183822 K21 48mm KB 2170, KB 2175 71 1.2006184030 K21 50mm KB 2170, KB 2175 73 1.3056184034 K21 52mm KB 2170, KB 2175 74 1.3006184110 K21 55mm KB 2170, KB 2175 76 1.5336184380 K21 60mm KB 2170, KB 2175 82 1.8216184460 K21 65mm KB 2170, KB 2175 85 2.0406184540 K21 70mm KB 2170, KB 2175 88 2.4796184620 K21 75mm KB 2170, KB 2175 92 3.0226184700 K21 80mm KB 2170, KB 2175 97 2.8906184710 K21 85mm KB 2170, KB 2175 106 3.8526184720 K21 90mm KB 2170, KB 2175 108 3.7306184725 K21 95mm KB 2170, KB 2175 108 4.8306184730 K21 100mm KB 2170, KB 2175 115 5.6256184735 K21 105mm KB 2170, KB 2175 120 6.620
Code ! Recommended Accessories y 0
6185350 K2L 22mm KB 2170, KB 2175 100 0.9346185430 K2L 24mm KB 2170, KB 2175 100 0.9586185510 K2L 27mm KB 2170, KB 2175 100 1.0076185780 K2L 30mm KB 2170, KB 2175 100 1.0766185860 K2L 32mm KB 2170, KB 2175 100 1.1356197950 K2L 33mm KB 2170, KB 2175 100 1.1236197010 K2L 34mm KB 2170, KB 2175 100 1.1696185940 K2L 36mm KB 2170, KB 2175 100 1.2216186080 K2L 38mm KB 2170, KB 2175 100 1.3256186160 K2L 41mm KB 2170, KB 2175 100 1.3936186240 K2L 46mm KB 2170, KB 2175 100 1.6216186242 K2L 50mm KB 2170, KB 2175 100 1.9476186244 K2L 55mm KB 2170, KB 2175 100 2.1006186246 K2L 60mm KB 2170, KB 2175 100 2.2536186248 K2L 65mm KB 2170, KB 2175 100 2.7236186250 K2L 70mm KB 2170, KB 2175 100 3.0056186252 K2L 75mm KB 2170, KB 2175 100 3.303
(1") square drive
› 1“ square drive. › In accordance with DIN 3129.
K 21 (MM)IMPACT SOCKETS 1"hexagon
V K 21 LIMPACT SOCKETS 1"hexagon, long pattern
› 1“ square drive. › In accordance with DIN 3121.
V
NEW
Code No. Sockets Extension 0
6186259 K21-21 1 K21 27 29 30 32 33 34 36 38 41 42 46 47 48 50 52 55 60 65 70 75 80
KB2190-175KB2190-250
KB2170/75 19-70mm safety ring & pinKB2170/75 71-90mm safety ring & pin
K21-21IMPACT SOCKET SET 1"
› 1“ square drive. › In accordance with DIN 3129. › GEDORE special steel, manganese phosphated. › Supplied in blue powder coated steel box.
V
* Picture for illustration purposes only. Contents/accessories may di� er.
57
Code ! Recommended Accessories y 0
1956548 INK21 17mm KB 2170, KB 2175 75 0.8001956558 INK21 19mm KB 2170, KB 2175 75 0.8251956566 INK21 22mm KB 2170, KB 2175 75 0.8451956574 INK21 24mm KB 2170, KB 2175 75 0.8881956582 INK21 27mm KB 2170, KB 2175 75 0.938
V
KB 2170 - KB 2175 SAFETY RING AND PINfor impact sockets 1"
Code No. 0
6657621 KB2170/75 19-70mm 0.026657623 KB2170/75 71-90mm 0.02
INK21 IMPACT ALLEN KEY SOCKETS 1"for in-hex screws
KB 2132 REDUCER 1" TO 3/4"for impact sockets
KB 2137 CONVERTER 1" TO 1.1/2"for impact sockets
› With square drive as per DIN 3121.
› With square drive as per DIN 3121. › For all standard electric and air tools. › With square drive as per DIN 3121.
Code No. a „
a Q „
Q y 0
6657460 KB2132 3/4“ 20 1 25 77 0.661
Code No. a „
a Q „
Q y 0 Price6657890 KB2137 1.1/2“ 40 1 25 85 0.988 101.70
Code No. a „ a y 0
6657969 KB2190/175 1 25 200 1.576657975 KB2190/250 1 25 300 1.756658000 KB2190/330 1 25 400 2.35
› For impact sockets and accessories with 1” square drive.
Code No. a „
a Q „
Q y 0
6658350 KB2195 1“ 25 1 25 136 1.42
› For impact sockets and accessories with 1” square drive.
KB 2190 EXTENSIONS 1"for impact sockets
KB 2195 UNIVERSAL JOINT 1"for impact sockets
58
IMPACT TOOLS
W
(1.1/2") square drive
KB 3770 - KB 3775SAFETY RING AND PINfor impact sockets 1.1/2"
K 37IMPACT SOCKETS 1.1/2"hexagon
KB 3790EXTENSIONS 1.1/2“for impact sockets
› 1.1/2” square drive. › In accordance with DIN 3129.
Code !. Recommended Accessories y 0
6328130 K37 46mm KB 3770, KB 3775 80 2.2606328210 K37 50mm KB 3770, KB 3775 82 2.3866328220 K37 52mm KB 3770, KB 3775 85 2.4206328230 K37 54mm KB 3770, KB 3775 85 2.4506328480 K37 55mm KB 3770, KB 3775 89 2.5006328560 K37 60mm KB 3770, KB 3775 92 2.7316328640 K37 65mm KB 3770, KB 3775 96 2.9016328720 K37 70mm KB 3770, KB 3775 101 3.4666328800 K37 75mm KB 3770, KB 3775 105 3.713 6328990 K37 80mm KB 3770, KB 3775 110 4.2526329020 K37 85mm KB 3770, KB 3775 116 5.3326329100 K37 90mm KB 3770, KB 3775 118 5.6586329290 K37 95mm KB 3770, KB 3775 118 6.3726329370 K37 100mm KB 3770, KB 3775 125 6.5436329450 K37 105mm KB 3770, KB 3775 125 7.5376329530 K37 110mm KB 3770, KB 3775 137 7.9596329610 K37 115mm KB 3770, KB 3775 137 8.833
Code No. a „ a y 0
6329885 KB3790/175 1.1/2 40 175 4.086329888 KB3790/250 1.1/2 40 250 5.206329890 KB3790/330 1.1/2 40 330 6.38
› For impact sockets and accessories with 1.1/2” square drive.
Code No. 0
6676762 KB3770/75 46-90mm 0.026676764 KB3770/75 95-115mm 0.02
Code No. a „
a Q „
Q y 0
6676410 KB3721 1 25 1.1/2 40 95 2.58
KB 3721REDUCER 1.1/2" TO 1"for impact sockets
› With square drive as per DIN 3121.
59
KB 3290-175 KB 3290-250 KB 3290-330
SCREWDRIVERS
2160PH 3C SCREWDRIVERS
63
NUT DRIVER SETS
67
ALLEN KEY SETS
68
SCREWDRIVER SETS
65
2150 3C SCREWDRIVERS
63
TORX® KEYS
70
NUT DRIVERS
67
ALLEN KEYS
68
SCREWDRIVER BITS
71
62
SCREWDRIVER
Seized screws are loosened by gently knocking on the striking cap. Full-length blade transfers the full 100% impact force onto the blade tip.
Soft fast turning zone with hard power point gets the power there quickly. Power point also ensures that the fore� nger reliably guides the blade.
Head marking for speci� cally and rapidly accessing the right screwdriver
338
POWER-GRIP3
Form A
Form B
Form A
Form B
powerful - unerring - absolute precision - wear-resistant... perfect power transmission includedThat is what the new series Power-Grip3 screwdrivers from GEDORE are… the reliable all-rounders for all work in wood, plastic and metal
Useful hanging hole
T Ergonomic grip design for optimum power transfer
T Maximum force involving minimum e�ort T Extensive contact surface with the hand T Ergonomically appropriately placed hard and soft elements give the grip its GEDORE typical kind-to-hands feel
T Suitable for small hands, large hands and for both right and left-handers
Blade injected as a positive �t into the plastic core and matt chrome-plated
The hard core is inside the grip. It takes up the force from the external components and easily transfers it to the shaft. The hard core can be seen at the head marking
Blade fully tempered for a long service life
Blade from GEDORE molybdenum-vanadium-Plus tempered steel for hardness, elasticity and resistance to wear
The torque required by the German Standards Institute (DIN/ISO) is exceeded considerably
The ideal all-rounder for screws in wood, plastic and metal
Precision-made blade tip ensures optimum power transfer onto the screw head
Head marking for speci�cally and rapidly accessing the right screwdriver
Seized screws are loosened by gently knocking on the striking cap. Full-length blade transfers the full 100 % impact force onto the blade tip.
GEDORE has two di�erent blade types for slotted head screws:
Workshop tip = wedge-shaped blade in acc. with DIN ISO 2380-1 Form-A
Electrician tip = slender, parallel blade in acc. with DIN ISO 2380-1 Form-B
Workshop tip for all types of bolting work. Screwdriver tip is wedge-shapedLittle parallel surface of nominal thickness DIN ISO 2380-1 Form-A
Electrician tip specially for screws deep down in the screw shaft e.g. with wire connectors and sockets.Extensive parallel surface of nominal thickness, no wedge-shapeDIN ISO 2380-1 Form-B
T Soft fast turning zone with hard power point - gets the power there quickly
T Power point also ensures that the fore�nger reliably guides the blade
Useful hanging hole.
Ergonomic grip design for optimum power transfer. Maximum force involving minimum e� ort. Extensive contact surface with the hand.Ergonomically placed hard and soft elements give the grip its kind-to-hands feeling.Suitable for all size hands, both right and left-handers.
Precision-made blade tip ensures optimum power transfer onto the screw head.
Made from Gedore Vanadium Molybdenum plus tempered steel for hardness, elasticity and resistance to wear.
Blade fully tempered for a long service life.
The hard core is inside the grip. It takes up the force from the external components and easily transfers it to the shaft. The hard core can be seen at the head marking.
That is what the new series Power-Grip3 screwdrivers from GEDORE are… reliable all-rounders for all work on all materials.
3C SCREWDRIVER
PERFECT POWER TRANSMISSION
63
3C-Screwdrivers
2150 3C SCREWDRIVERSfor slotted-head screws, special lengths
› According to DIN ISO 2380-2. › Blade tip according to DIN ISO 2380-1 Form A. › 3-component handles. › Power-Grip3 with hanging hole. › Ergonomic handle design enables precise and fatigue-free working. › Positive-�t joint of handle and blade for optimum transmission of force. › Type of drive marked at end of the handle. › Blade from Gedore Molybdenum-Vanadium-plus tempered steel.
Code No. M ? K L N Ø 0
6679270 2150 3 80 3.0 0.5 165 3.0 0.0396679350 2150 4 100 4.0 0.8 185 4.0 0.0616679430 2150 5.5 100 5.5 1.0 200 5.0 0.0936679510 2150 6.5 150 6.5 1.2 260 6.0 0.1286679780 2150 8 150 8.0 1.2 270 7.0 0.1706679860 2150 10 200 10.0 1.6 320 8.0 0.203
Code No. M ? K L N Ø 0
2822709 2150-2.5-75 75 2.5 0.4 160 2.5 0.0556680280 2150 3-150 150 3.0 0.5 235 3.0 0.0446680360 2150 4-150 150 4.0 0.8 235 4.0 0.0696680520 2150 5.5-150 150 5.5 1.0 250 5.5 0.1046680870 2150 6.5-200 200 6.5 1.2 310 6.0 0.152
2160 PH 3C SCREWDRIVERSfor cross-head screws PH
› According to DIN ISO 8764. › Tip according to DIN ISO 8764-1 PH. › 3-component handles. › Power-Grip3 with hanging hole. › Ergonomic handle design enables precise and fatigue-free working. › Positive-�t joint of handle and blade for optimum transmission of force. › Type of drive marked at end of the handle. › Size 3 blade with hexagon bolster. › Blade from Gedore Molybdenum-Vanadium-plus tempered steel.
Code No. + N ; PH 0
6683110 2160 PH 0 M1,6-M2 145 0 0.0326683380 2160 PH 1 M2-M3 200 1 0.0806683460 2160 PH 2 M3,5-M5 210 2 0.1196683540 2160 PH 3 M5,5-M7 270 3 0.192
2160 PZ 3C SCREWDRIVERSfor cross-head screws Pozi PZ
› Acc. to DIN ISO 8764, tip acc. to DIN ISO 8764-1 PZ. › 3-component handles. › Power-Grip3 with hanging hole. › Ergonomic handle design enables precise and fatigue-free working. › Positive-�t joint of handle and blade for optimum transmission of force. › Type of drive marked at end of the handle. › Size 3 blade with hexagon bolster. › Blade from GEDORE Molybdenum-Vanadium-Plus tempered steel.
Code No. + N < PZ 0
6683970 2160 PZ 0 M1,6-M2 145 0 0.0386684000 2160 PZ 1 M2-M3 180 1 0.0806684190 2160 PZ 2 M3,5-M5 210 2 0.1196684270 2160 PZ 3 M5,5-M7 270 3 0.189
64
SCREWDRIVER
Electrician’sPhillips
POZIDRIV ®
Mechanic’sTORX ®
2153 3C SCREWDRIVERfor slotted-head screws, stubby
› Acc. to DIN ISO 2380-2A, blade tip acc. to DIN ISO 2380-1 Form B. › For con�ned spaces. › 3-component handles. › Power-Grip3 with hanging hole. › Ergonomic handle design enables precise and fatigue-free working. › Positive-�t joint of handle and blade for optimum transmission of force. › Type of drive marked at end of the handle. › Blade from GEDORE Molybdenum-Vanadium-Plus tempered steel.
Code No. ? K L N 0
1482432 2153-5.5 5.5 1.0 81 0.036
2161 PH 3C SCREWDRIVERfor cross-head screws PH, stubby
› Acc. to DIN ISO 8764, tip acc. to DIN ISO 8764-1 PH. › For con�ned spaces. › 3-component handles. › Power-Grip3 with hanging hole. › Ergonomic handle design enables precise and fatigue-free working. › Positive-�t joint of handle and blade for optimum transmission of force. › Type of drive marked at end of the handle. › Blade from GEDORE Molybdenum-Vanadium-Plus tempered steel.
Code No. + N 0
1531204 2161 PH 2 M3,5 - M5 81 0.036
2163 TX 3C SCREWDRIVERSfor recessed TORX® head screws
› 3-component handles. › Power-Grip3 with hanging hole. › Ergonomic handle design enables precise and fatigue-free working. › Positive-�t joint of handle and blade for optimum transmission of force. › Type of drive marked at end of the handle. › Blade from GEDORE Molybdenum-Vanadium-Plus tempered steel. › TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA.
Code No. 7 + & N 0
6685400 2163 TX T6 T6 M2 1,69 145 0.0296685590 2163 TX T7 T7 M2,5 1,99 145 0.0386685670 2163 TX T8 T8 M2,5 2,31 145 0.0386685750 2163 TX T9 T9 M3 2,50 145 0.0386685830 2163 TX T10 T10 M3 - M3,5 2,74 165 0.0396685910 2163 TX T15 T15 M3,5 - M4 3,27 165 0.054
Code No. 7 + & N 0
6686050 2163 TX T20 T20 M4 - M5 3,86 185 0.0606686130 2163 TX T25 T25 M4,5 - M5 4,43 200 0.0826686210 2163 TX T27 T27 M4,5 - M6 4,99 215 0.0986686480 2163 TX T30 T30 M6 - M7 5,52 225 0.1236686560 2163 TX T40 T40 M7 - M8 6,65 240 0.1446686640 2163 TX T45 T45 M8 - M10 7,82 250 0.176
65
3C-Screwdriver Sets
Code No. Contents 0
3037371 DT2142 k 2142 2 2,5 3 4 5 6 8 10 0.970
NEW
2150-2160 PH-06 MS 3C SCREWDRIVER SET6 pieces
Code No. Contents 0
1482319 2150-2160 PH-06 MS ? 2150 4 5.5 6.5 8 0.660; 2160 PH1 PH2
2163 TX 3C TORX® SCREWDRIVER SET10 pieces
› Practical set composition in environmentally-friendly cardboard box. › For recessed TORX® head screws. › 3-component handles. › Power-Grip3 with hanging hole. › Ergonomic handle design enables precise and fatigue-free working. › Positive-�t joint of handle and blade for optimum transmission of force. › Type of drive marked at end of the handle. › Blade from GEDORE Molybdenum-Vanadium-Plus tempered steel. › TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA.
Code No. Contents 0
1482335 2163TX 7 2163 T7 T8 T9 T10 T15 T20 T25 T27 T30 T40 0.740
2150-2160 PH-06 ELS 3C SCREWDRIVER SET6 pieces
Code No. Contents 0
1482320 2150-2160 PH-06 ELS ? 2150 6.5 3-150 4-150 6.5-200 0.660; 2160 PH1 PH2
› Practical set composition in environmentally-friendly cardboard box. › For slotted and cross-head screws PH. › 3-component handles. › Power-Grip3 with hanging hole. › Ergonomic handle design enables precise and fatigue-free working. › Positive-�t joint of handle and blade for optimum transmission of force. › Type of drive marked at end of the handle. › Blade from GEDORE Molybdenum-Vanadium-Plus tempered steel.
› Practical set composition in environmentally-friendly cardboard box. › For slotted and cross-head screws PH. › 3-component handles. › Power-Grip3 with hanging hole. › Ergonomic handle design enables precise and fatigue-free working. › Positive-�t joint of handle and blade for optimum transmission of force. › Type of drive marked at end of the handle. › Blade from GEDORE Molybdenum-Vanadium-Plus tempered steel.
DT 2142-008 HEXAGON ALLEN KEY SET8 pieces
› With 2 hexagons, same size each end. › 2C-T handle. › Soft component made from thermoplastic elastomer. › Hard component made from �bre glass reinforced plastic. › With hanging hole. › GEDORE vanadium steel 61CrSiV5. › Positive-�t joint of handle and blade for optimum transmission of force.
66
SCREWDRIVER
*WHILE STOCKS LAST *WHILE STOCKS LAST
Code No. 0
6698650 4611 115
Electronic Screwdrivers
165-171-06 ELECTRONIC SCREWDRIVER SET6 pieces
› For slotted head and cross-slotted head screws PH. › Blade in high-alloy Chrome Vanadium Molybdenum steel, chrome-plated. › Tip additionally coated for highest precision and corrosion protection. › 2-component handle in ergonomic design. › Pivoting end cap with micro anti-slip surface. › Colour coding of the drive type. › In plastic case. › With Gedore Check-Tool-System: 2-colour foam insert to check that the set is complete
165 TX-06 ELECTRONIC SCREWDRIVER SET6 pieces
› For recessed TORX® head screws. › Blade in high-alloy Chrome Vanadium Molybdenum steel, chrome-plated. › Tip additionally coated for highest precision and corrosion protection. › 2-component handle in ergonomic design. › Pivoting end cap with micro anti-slip surface. › Colour coding of the drive type. › In plastic case. › With GEDORE Check-Tool-System: 2-colour foam insert to check that the set is complete.
Code No. Contents 0
1902849 165-171-06 * ; 165 PH 000 00 0 0.385? 171 IS 1,2 1,8 2,5
Code No. Contents 0
1902857 165-TX-06 * 7 165 TX T5 T6 T7 T8 T9 T10 0.415
4611 POWER TESTING SCREWDRIVER › For 6-24 Volt with clamp cable.
Code No. $ Ø ! N 0
1746731 2133 5,5mm - 5 5.5 225 0.1071746758 2133 6mm - 5 6.0 225 0.1091746766 2133 7mm - 6 7.0 235 0.1351746855 2133 8mm - 6 8.0 235 0.1521746863 2133 9mm - 6 9.0 235 0.1681746898 2133 10mm 10 6 10.0 245 0.1981746901 2133 11mm 13 8 11.0 245 0.2021746928 2133 12mm 13 8 12.0 245 0.2211746944 2133 13mm 13 8 13.0 245 0.225
67
Nut Drivers
2133 NUT DRIVERS WITH 3C HANDLE › Acc. to DIN 3125, ISO 2725-1. › 3-component handles. › Power-Grip3 with hanging hole. › Ergonomic handle design enables precise and fatigue-free working. › Positive-�t joint of handle and blade for optimum transmission of force. › Head depth 25 mm, blade length 125mm. › 10 mm and larger with hexagon bolster. › Blade from GEDORE Molybdenum-Vanadium-Plus steel.
2133 NUT DRIVER SETSfor hexagon nuts
› Made up of most popular sizes.
Code No. Contents 0
1746947 2133-06S 2133 5,5 6,0 7,0 8,0 9,0 10,0 0.6481746946 2133-06L 2133 8,0 9,0 10,0 11,0 12,0 13,0 0.9371746948 2133-09 2133 5,5 6,0 7,0 8,0 9,0 10,0 11,00 12,00 13,00 1.300
55 SPARK PLUG SPANNER 94 VDE NUT DRIVERS 136
68
SCREWDRIVER
Code No. y 0
6342200 42 0,7mm 32 0.0016342390 42 0,9mm 34 0.0016342470 42 1,3mm 40 0.0016340260 42 1,5mm 45 0.0026340340 42 2mm 50 0.0026340420 42 2,5mm 56 0.0036340500 42 3mm 63 0.0046340690 42 4mm 70 0.0106340770 42 5mm 80 0.0186340850 42 6mm 90 0.0306340930 42 7mm 95 0.0426341070 42 8mm 100 0.0606341150 42 9mm 106 0.0806341230 42 10mm 112 0.1006341231 42 11mm 117 0.1306341310 42 12mm 125 0.1606341580 42 14mm 140 0.2606341581 42 16mm 150 0.3206341660 42 17mm 160 0.4406341740 42 19mm 180 0.6206341820 42 22mm 200 0.950
Code No. y 0
6341900 42 24mm 224 1.2506342550 42 27mm 244 1.7606342040 42 1/16 AF 45 0.0016342041 42 5/64 AF 50 0.0026344330 42 3/32 AF 53 0.0036344410 42 1/8 AF 59 0.0056344411 42 9/64 AF 62 0.0076344680 42 5/32 AF 65 0.0096344760 42 3/16 AF 72 0.0156344840 42 7/32 AF 78 0.0206344920 42 1/4 AF 84 0.0306345060 42 5/16 AF 97 0.0556345140 42 3/8 AF 110 0.0906345141 42 7/16 AF 114 0.1406345220 42 1/2 AF 122 0.1906345300 42 9/16 AF 136 0.2706345490 42 5/8 AF 146 0.3606345491 42 11/16 AF * 156 0.4206345570 42 3/4 AF 175 0.6006345571 42 7/8 AF 195 0.9006345572 42 1 AF 218 1.400
Code ! Contents 0
6347510 42-7M 2 2,5 3 4 5 6 8 0.2006349050 42-8M 3 4 5 6 8 10 12 14 0.700 6349051 42-88M 2 2,5 3 4 5 6 8 10 0.3006349052 42-100M 2 2,5 3 4 5 6 7 8 9 10 0.400012112 42-22M 0,7 0,9 1,3 1,5 2 2,5 3 4 5 6 7 8 9 10 11 12 14 16 17 19 22 24 6.2006349053 42-88P 3/32” 1/8” 5/32” 3/16” 7/32” 1/4” 5/16” 3/8” 0.2006348910 42-9P 1/16” 5/64” 3/32” 1/8” 5/32” 3/16” 1/4” 5/16” 3/8” 0.3006351974 42L-7M 2 2,5 3 4 5 6 8 0.2006351975 42L-9M 1,5 2 2,5 3 4 5 6 8 10 0.4006351976 42L-14M* 1,5 2 2,5 3 4 5 6 7 8 9 10 11 12 14 2.200
42-88M
42L-9M
42 (MM) / (AF)HEXAGON ALLEN KEYSfor hexagon screws
› For hexagon socket head bolts. › Chrome Vanadium steel 59CrV4. › Gunmetal � nish. › Short series. › In accordance with SANS 1210 and DIN 911.
Allen Keys
42 / 42L (MM) / (AF)HEXAGON ALLEN KEY SETS
› Made up of most popular sizes.
*WHILE STOCKS LAST
69
Code No. y 0
6350809 42L-1,5 90 0.0026350810 42L-2 100 0.0036351030 42L-2,5 112 0.0056351110 42L-3 125 0.0086351380 42L-4 142 0.0206351460 42L-5 163 0.0306351540 42L-6 184 0.0502977486 42L-7 194 0.0706351620 42L-8 205 0.1006351621 42L-9 216 0.1406351700 42L-10 231 0.1806351890 42L-11 244 0.2406351891 42L-12 259 0.2906351970 42L-14 290 0.4456351971 42L-17 333 0.600
1543375 42L-1/16 * 80 0.0021543376 42L-5/64 * 80 0.0031543377 42L-3/32 * 84 0.0041543318 42L-1/8 * 94 0.0071543319 42L-9/64 * 102 0.0101543326 42L-5/32 * 103,5 0.0131543334 42L-3/16 * 111 0.0301543342 42L-7/32 * 122,5 0.0401543369 42L-1/4 * 130 0.0451543350 42L-5/16 * 150 0.0821543385 42L-3/8 * 168 0.1301543386 42L-7/16 * 188 0.2001543393 42L-1/2 * 206 0.2901543407 42L-9/16 * 266 0.400
Code No. y 0
2647257 42T-2 140 0.0352647265 42T-2,5 152 0.0402647273 42T-3 165 0.0452647281 42T-4 182 0.0552647303 42T-5 200 0.0702647311 42T-6 220 0.0902681439 42T-7 230 0.1302667846 42T-8 240 0.1502647338 42T-10 264 0.230
2647351 42T-5/64 * 140 0.0352647352 42T-3/32 * 152 0.0402647354 42T-1/8 * 166 0.0502647361 42T-9/64 * 182 0.0502647362 42T-5/32 * 182 0.0502647370 42T-3/16 * 200 0.0602647388 42T-7/32 * 220 0.0802647389 42T-1/4 * 220 0.0952647397 42T-5/16 * 240 0.1502647400 42T-3/8 * 264 0.220
Code ! Contents 0
6351977 42KL-7M 1,5 2 2,5 3 4 5 6 0.2506351978 42KL-9M 1,5 2 2,5 3 4 5 6 8 10 0.395 6351979 42KL-7P 3/64” 1/16” 5/64” 3/32” 1/8” 1/4” 5/32” 0.300
Code ! Contents 0
6351972 42SCL-6M 3 4 5 6 8 10 0.1706351973 42SCL-7M * 2 2,5 3 4 5 6 8 0.175
42SCLHEXAGON ALLEN KEY SETS
› Chrome Vanadium steel 59CrV4. › Blackened � nish and blue
polypropylene holder. › Easy to handle. › Indispensable pocket set for
electricians.
*WHILE STOCKS LAST
42L (MM) / (AF)HEXAGON ALLEN KEYSfor in-hex screws
› For hexagon socket head bolts. › Chrome Vanadium steel 59CrV4. › Gunmetal � nish. › Long pattern for use in hard to access areas. › Cranked shaft, resulting in a lever e� ect during tightening or loosening operation.
42KL (MM) / (AF)HEXAGON ALLEN KEY SETSfor in-hex screws
› Hexagon socket key with ball end and holder. › Chrome Vanadium steel 59CrV4. › Gunmetal � nish.
42T (MM) / (AF)HEXAGON ALLEN KEYSfor in-hex screws
› Chrome Vanadium steel 59CrV4. › Blackened � nish and blue polypropylene handle. › T-shaped handle, making tightening or loosening operations easier for users.
*WHILE STOCKS LAST
*WHILE STOCKS LAST
TORX® = Registered trademark of Acument Intellectual Properties, LLC. USA.
43 KTXCRANKED SOCKET KEY SETfor recessed TORX® screws, with ball end
Code ! Contents 0
6367897 43KTX-8M T9 T10 T15 T20 T25 T27 T30 T40 0.130
70
SCREWDRIVER
Code No. + & y 0
6363550 43 TX-T6 M2 1,67 42 0.0046363630 43 TX-T7 M2,5 1,99 48 0.0056363710 43 TX-T8 M2,5 2,31 48 0.0056363980 43 TX-T9 M3 2,50 48 0.0056364010 43 TX-T10 M3-M3,5 2,74 51 0.0086364280 43 TX-T15 M3,5-M4 3,27 54 0.0086364360 43 TX-T20 M4-M5 3,86 57 0.0116364440 43 TX-T25 M4,5-M5 4,43 60 0.0146364520 43 TX-T27 M4,5-M5-M6 4,99 64 0.0226364600 43 TX-T30 M6-M7 5,52 70 0.0296364790 43 TX-T40 M7-M8 6,65 76 0.0416364870 43 TX-T45 M8-M10 7,82 83 0.0616364950 43 TX-T50 M10 8,83 95 0.0876365090 43 TX-T55 M12 11,22 108 0.1766365170 43 TX-T60 M14 13,25 120 0.180
TORX® = Registered trademark of Acument Intellectual Properties, LLC. USA.
*PACKAGING SUBJECT TO CHANGE WITHOUT NOTICE.
42SCKLHEXAGON ALLEN KEY SETfor in-hex screws
› Hexagon socket key with ball end and holder. › Chrome Vanadium steel 59CrV4. › Gunmetal � nish.
Code ! Contents 0
6351980 42SCKL 5M * 5 6 7 8 10 0.270
43TXCRANKED SOCKET KEYSfor recessed TORX® screws
› Made from Chrome Vanadium steel 59CrV4. › L-shaped. › Long pattern for use in hard to access areas. › Gunmetal � nish.
43TXCRANKED SOCKET KEY SETSfor recessed TORX® screws
› Chrome Vanadium steel 59CrV4. › Gunmetal � nish. › Supplied in plastic wallet.
Code ! Contents 0
6360959 43TX-08 Plastic Holder T9 T10 T15 T20 T25 T27 T30 T40 0.0906360961 43TX-15* T6 T7 T8 T9 T10 T15 T20 T25 T27
T30 T40 T45 T50 T55 T600.500
› Made from Chrome Vanadium steel 59CrV4. › L-shaped. › Cranked shaft, resulting in a lever e� ect during tightening or loosening operation. › Blackened � nish.
*WHILE STOCKS LASTTORX® = Registered trademark of Acument Intellectual Properties, LLC. USA.
TORX® Keys
2163 TX TORX® SCREWDRIVER SETS 65
71
Code No. y 0
654124 690 PH 1 25 0.005654132 690 PH 2 25 0.005655279 690 PZD - 1 25 0.005655287 690 PZD - 2 25 0.005
Code No. + & y 0
654183 687 TX - T6 M2 1,67 25 0.005654191 687 TX - T7 M2,5 1,99 25 0.005654205 687 TX - T8 M2,5 2,31 25 0.005654213 687 TX - T9 M3 2,50 25 0.005654221 687 TX - T10 M3-M3,5 2,74 25 0.005654248 687 TX - T15 M3,5-M4 3,27 25 0.005654256 687 TX - T20 M4-M5 3,86 25 0.005654264 687 TX - T25 M4,5-M5 4,43 25 0.005654272 687 TX - T27 M4,5-M5-M6 4,99 25 0.005654280 687 TX - T30 M6-M7 5,52 25 0.005654299 687 TX - T40 M7-M8 6,65 25 0.005
POZIDRIV® = Registered Trademark of GKN Fasteners.
TORX® = Registered trademark of Acument Intellectual Properties, LLC. USA.
TORX® = Registered trademark of Acument Intellectual Properties, LLC. USA.
TORX® = Registered trademark of Acument Intellectual Properties, LLC. USA.
Code No. + & y 0
6367106 43 TXL-T6 * M2 1,67 90 0.0076367107 43 TXL-T7 * M2,5 1,99 100 0.0076367108 43 TXL-T8 * M2,5 2,31 110 0.0076367109 43 TXL-T9 * M3 2,50 124 0.0086367110 43 TXL-T10 * M3-M3,5 2,74 138 0.0106367380 43 TXL-T15 * M3,5-M4 3,27 158 0.0206367460 43 TXL-T20 * M4-M5 3,86 178 0.0206367540 43 TXL-T25 * M4,5-M5 4,43 190 0.0306367620 43 TXL-T27 * M4,5-M5-M6 4,99 200 0.0506367700 43 TXL-T30 * M6-M7 5,52 210 0.0606367890 43 TXL-T40 * M7-M8 6,65 215 0.0856367891 43 TXL-T45 * M8-M10 7,82 224 0.1106367892 43 TXL-T50 * M10 8,83 232 0.1856367893 43 TXL-T55 * M12 11,22 248 0.2006367894 43 TXL-T60 * M14 13,25 278 0.415
687 / 690 SCREWDRIVER BITS › 687 For TORX® screws. › 690 For Phillips and POZIDRIV® screws. › Manufactured from high quality Molybdenum tool steel. › Gun metal �nish.
TORX®
POZIDRIV®
43TXL CRANKED SOCKET KEYSfor recessed TORX® screws
› Made from Gedore Chrome Vanadium steel 59CrV4 › L-shaped. › Long pattern for use in hard to access areas. › Gun-metal �nish.
43TV TORX® GAUGE TESTER
› Easy determination of internal or external TORX® sizes
43TXL CRANKED SOCKET KEY SETSfor recessed TORX® screws
› L-shaped. › Long pattern for use in hard to access areas.
Code ! Contents 0
6367895 43TXL 09 * T7 T8 T9 T10 T15 T20 T25 T30 T40 0.3006367896 43TXL 15 *
T6 T7 T8 T9 T10 T15 T20 T25 T27 T30 T40 T45 T50 T55 T60
1.200
*WHILE STOCKS LAST
*WHILE STOCKS LAST
Code No. 0
024700 43 TV 0.023
TORX® = Registered trademark of Acument Intellectual Properties, LLC. USA.
Screwdriver Bits
PLIERS
SETS
LOCKGRIP / UNIVERSAL
87
CIRCLIP
82
FLAT / ROUND NOSE
76
CABLE STRIPPERS / CRIMPERS
80
PIPE WRENCHES
86
MECHANICS
77
CUTTERS
88
TIN SNIPS / PIPE CUTTERS
89
COMBINATION PLIERS
74
74
PLIERS
Code No. y
6707070 8250 - 180 JC 180 2406707310 8250 - 200 JC 200 320
R
R
8250 POWER COMBINATION PLIERS › According to DIN ISO 5746. › For heavy continuous use. › Good lever action for easy cutting. › For � at and round material.
› To cut all wire types including piano wire, 1.6 mm. › Gedore special hardened and tempered steel, drop-forged, oil-hardened and annealed. › JC = chrome plated, with 2-component handles. › TL = steel-grey, with blue dipped non-slip handles.
Maximum cutting performance for
minimal e� ort expended thanks to
an optimum interaction of cutting
geometry, eccentric rivet bearing
and ergonomic handle design.
› Identi� es the GEDORE Power Pliers range, o� ering increased cutting and gripping force with up to 35% less e� ort.
High-grade 2-component handles
with � nger protection enable work to
be done ergonomically and without
fatigue.
Roughly toothed gripping surfaces for
securely holding screws, pipes etc.
Gripping surface with � le-cut
for a particularly e� ective
grip.
Inductively hardened cutting edges
(62 - 64 HRC) ensure constant cutting
power over a long time period.
8250POWER COMBINATION PLIERS
8250-225 TLPOWER COMBINATION PLIERS › For heavy, continuous use. › Good lever action for easy cutting. › Induction hardened precision cutting edge. › Hardness approximately 63HRC. › To cut all wire types, including piano wire. › DIN ISO 5756.
Combination Pliers
Code No. y
6708040 8250 - 225 TL 225 400
R 8260FENCING PLIERS › For heavy duty, continuous use. › CrV material. › Hardened and tempered. › Cutting edges induction hardened.
Code No. y
670250 8260 - 250 250 570670300 8260 - 300 310 930
75
*WHILE STOCKS LAST
JC TL
8316 POWER SIDE CUTTER › According to DIN ISO 5749. › Good lever action for easy cutting. › For hard wire/piano wire. › Maximum cutting capacity Ø 1.4 - 2.0mm.
› Gedore special hardened and tempered steel, drop-forged, oil-hardened and annealed. › JC = chrome plated, with 2-component handles. › TL = steel-grey, with blue dipped non-slip handles.
Maximum cutting performancefor
minimal e� ort expended due to
an optimum interaction of cutting
geometry, eccentric rivet bearing and
ergonomic handle design.
Inductively hardened cutting
edges (63 - 65 HRC) ensure
constant cutting power over a
long period.
8316POWER SIDE CUTTERS
Code No. Ø y
6711930 8316 - 140TL 1,4 140 1326744190 8316 - 140 JC 1,4 140 1526744510 8316 - 160 JC 1,6 160 2106745080 8316 - 200 JC 2,0 200 305
Side Cutters / Pincers
P
P 8380TOWER PINCERS › Heavy-duty wire braid and mesh-cutting pincers. › Accoding to DIN ISO 9242, Form A. › Induction hardened precision cutting edges, hardness 61-63 HRC. › For medium-hard wire, 1.6 mm. › Heads ground, steel-grey, with blue dipped non-slip handles (TL). › Geometrically optimised head and handle areas for ergonomic use.
8381PINCERS › Standard heavy-duty pincers. › Accodingto DIN ISO 9243, Form A. › Induction hardened precision cutting edges, hardness 61-63 HRC. › Heads ground, steel-grey, with blue dipped non-slip handles (TL).
Code No. y
6752370 8381 - 160 TL * 160 2256751990 8381 - 200 TL * 200 4106752450 8381 - 225 TL * 224 450
Code No. y
6752020 8380 - 225 TL 225 3156752100 8380 - 250 TL 250 400
Q
76
PLIERS
*WHILE STOCKS LAST
Flat Nose / Round Nose Pliers
S
JC
8112ROUND NOSE PLIERSserrated
› Similar to DIN ISO 5745. › Short jaws, serrated gripping faces. › For gripping and bending. › Gedore special hardened and tempered steel, drop-forged, oil-hardened and annealed. › JC = chrome-plated, with 2-component handles. › TL = steel-grey, with blue dipped non-slip handles.
R
JC
8120FLAT NOSE PLIERSwithout cutting edge, serrated gripping faces
› Accoding to DIN ISO 5745. › Long jaws, serrated gripping faces. › For holding and bending. › Gedore special hardened and tempered steel, drop-forged, oil-hardened and annealed. › JC = chrome plated, with 2-component handles. › TL = steel-grey, with blue dipped non-slip handles.
TL
Code No. y
6710370 8120 - 160 TL 160 1216715170 8120 - 160JC 160 140
TL
Code No. y
6713200 8112 - 140 TL * 140 926713390 8112 - 140 JC 140 117
› Accoding to DIN ISO 5745. › Long, � at-round jaws, straight gripping faces, serrated. › For holding, gripping, bending and cutting. › Induction hardened precision cutting edges,
hardness 61-63 HRC. › Gedore special hardened and tempered steel, drop-
forged, oil-hardened and annealed. › JC = chrome plated, with
2-component handles. › TL = steel-grey, with blue dipped
non-slip handles.
8132 ABBENT NOSE TELEPHONE PLIERSwith cutting edge, serrated, angled pattern
› Similar to DIN ISO 5745. › Long, � at-round jaws, angled gripping surfaces,
serrated. › 45 ° angled tips make gripping
round the corner possible. › Induction hardened precision cutting edges,
hardness 61-63 HRC. › Gedore special hardened and
tempered steel, drop-forged, oil-hardened and annealed. › JC = chrome plated, with 2-component handles. › TL = steel-grey, with blue dipped non-slip handles.
T
JC
TL
8132TELEPHONE PLIERSwith cutting edge, serrated, straight pattern
8135TELEPHONE PLIERSwithout cutting edge, serrated, straight pattern
› Accoding to DIN ISO 5745, straight pattern. › Flat-round tapered jaws, cross-hatched
gripping surfaces and � ne-tipped nose. › Gedore special hardened and tempered
steel, drop-forged, oil-hardened and annealed. › Steel-grey, with blue
dipped non-slip handles.
Code No. y
6710610 8132 - 140 TL 140 1036718860 8132 - 140 JC 140 1186719240 8132 - 160 JC 160 1406719670 8132 - 200 JC 200 200
JC
Code No. y
6711180 8132 - AB - 160 TL 160 1206720920 8132 - AB - 160 JC 160 1406711260 8132 - AB - 200 TL 200 1756721300 8132 - AB - 200 JC 200 200
T
Code No. y
6722460 8135 - 140 TL 140 95
TL
T
77
T 8136MECHANIC‘S PLIERSwithout wire cutter, straight pattern
› According to DIN ISO 5745. › Flat-round tapered jaws, cross-hatched
gripping surfaces. › For holding, gripping and bending. › Fine-tipped nose, for safe work in con� ned
spaces. › Gedore special hardened and tempered steel,
drop-forged, oil-hardened and annealed.
› JC = chrome-plated, with 2-component handles. › TL = steel-grey, with blue dipped non-slip
handles.
JC
TL
8133MULTIPLE PLIERSwith cutting edge, serrated, straight pattern
8133 MULTIPLE PLIERS › Multifunctional pliers for the mechanical and electronic � elds. › For holding, cutting, insulation-stripping, crimping, squeezing. › Flat-round jaws, straight gripping faces, serrated. › For medium-hard wire, 1.6 mm. › Gedore special hardened and tempered steel, drop-forged, oil-hardened and annealed.
› JC = chrome plated, with 2-component handles. › TL = steel-grey, with blue dipped non-slip handles.
Gripping faces with � le-cut for safe holding.
Cutting edge induction hardened (62-64 HRC).
Crimping of conductor end-sleeves 0.5-2.5mm2.
Squeezing of insulated � at plugs 1.0-2.5mm2.
Stripping of wire sizes 0.5/1.5/2.5mm2.
T
Code No. y
6722110 8133 - 180 JC 160 120
Mechanic‚s Pliers
Code No. y
6722890 8136 - 200 TL 200 178
78
PLIERS
Pliers sets › Produced in-house by GEDORE Austria. › Combination, � at-nosed, round-nosed and mechanic‘s pliers made from Gedore special hardened
and tempered steel. › Side cutters and end cutting nippers made from GEDORE high-performance hardened and tempered steel. › Chrome-plated, 2-component handle protectors. › Hot-forged tempered steel. › Precision-machined, oil-hardened and annealed.
› Induction-rehardened cutting edges. › Protective nickel and chrome plating. › Optimum transfer of force. › High cutting performance. › Fatigue-free, even with constant use. › Guaranteed GEDORE quality.
S 8003 JCPLIERS SET3 pieces
› Practical set in environmentally friendly cardboard box.
Code No. Contents
6701110 S 8003 JC8132-200 JC Telephone Pliers8250-200 JC Combination Pliers8316-200 JC Side Cutters
1025
1102-003PLIERS SET3 pieces
› In Gedore L-BOXX® Mini, including divider set.
Code No. Contents
1692305 1102-0038132-160 JC Telephone Pliers8250-180 JC Combination Pliers8316-160 JC Side Cutters
940
S8303 JCPLIERS SET3 pieces
› Practical set in environmentally friendly cardboard box.
Code No. Contents
6703160 S 8303 JC142 10 JC Universal Pliers8250-180 JC Combination Pliers8316-160 JC Side Cutters
1005
S8393 JCPLIERS SET3 pieces
Code No. Contents
3012859 S 8393 JC142 10 TL Universal Pliers8250-200 JC Combination Pliers8314-180 JC Side Cutters
1005
› Practical set in environmentally friendly cardboard box.
NEW
79
Cable cutters
BOLT CUTTERS
› Notch cut; the cutters press into the material and create a notch. The material is compacted and thus separated. › The wire rope is compressed and thus loses its circular cross-
section at the cut. The wire rope fans out as a result.
GEDORE WIRE ROPE CUTTERS
› The cutting plates slide past each other dissecting the material. › The wire rope is cleanly cut and retains its circular cross-
section. It does not fan out.
Splicing: › The old seafaring ability to separate the rope into its individual strands so as
to then braid them into a loop or lengthen the rope with another rope without knotting.
8320 JLWIRE ROPE CUTTERSExecution: › Easy-to-change cutting plates. › Cutting plates of powder metallurgical high-speed steel (HSS). Manufactured in the MIM process
(Metal Injection Moulding). › Extremely soft shearing cut reliably prevents the wire rope from fanning out.
Jaws/cutting edges: › Specially arched cutting edges. › Easy to replace cutting plates if worn. › Hardness 62-65 HRC. › Low force needed due to the optimum cutting-edge geometry. › Two integrated press pro� les for Bowden cable terminal sleeves and cable end sleeves.
Cutting performance: › Wire ropes up to 1800N/mm2 with maximum 6mmØ. (e.g. stainless steel wire ropes, wire ropes with
steel and textile cores, Bowden cables, shears). › Wire up to 750N/mm2 with maximum 4mmØ. (e.g. nails/wire nails, screws, bolts, ceiling banners).
› Single- and multi-core copper and aluminium cables with maximum 6mmØ.Joint: › Adjustable joint for precise cutting plate guidance. › Latch to prevent unwanted opening.
Handles: › With 2-component handles.
Material/� nish: › Plier body hot drop-forged. › Chrome plated.
Fanning out: › Separation into individual strands is not wanted when cutting wire ropes. It is a very laborious
business to splice wire ropes. That is why more up-to-date ways are available to incorporate loops in wire ropes. However, they require a smooth cut without any spliced strands.
Code No. y
2788799 8320 - 200 JL 200 480
Stripping Tools
8146-1 8146-2
8146STRIPPING PLIERSwith exchangeable module inserts, self-adjusting
› Self-adjusting cutting and stripping tool for modern electrical installations and equipment circuitry (90% of all wires can be stripped without any adjustment of the tool). › The use of easily exchangeable module inserts allows accurate stripping
of a wide range of insulation materials, including PVC and PTFE, with just one tool. › Flat blade included in delivery. › Dimensions: 191 x 123 x 20mm.
Code No. Description mm2 AWG 1830805 8146 Stripping pliers including module insert 8146-1 0,02-10 34-8 1801830813 8146-1 Module insert with � at blade 0,02-10 34-8 151830821 8146-2 Module insert with round blade 4-16 12-6 16
8146
Stripping capacity: › 8146-1 with � at blade: 0.02-10mm2 / AWG 34-8 (for PVC insulation). › 8146-2 with round blade: 4-16mm2 / AWG 10-5.
Cutting values: › Flexible wires up to 10mm2 / AWG 8. › Rigid wires up to 1.5mm2 / AWG 16.
80
PLIERS
ADVANTAGES: › Reliable: parallel action ensures precision crimping. › Easy to handle: components kept visible throughout the crimping process, easily accessible release function allows
quick change of insert modules without the use of additional tools. › Comfortable: lightweight, plastic-sheathed tool frame for comfort grip - even at low temperatures. › Practical: insert modules, easy to change and clearly labelled, supplied in pairs on a pin in a storage box to prevent
loss (storage boxes interconnect - like a jigsaw puzzle). › Versatile and economical: just one tool base frame can be used with all the various insert modules to carry out a
wide range of crimping processes, including heavy plug and socket connectors, coaxial connectors, optic � bres and RJ45 plugs.
CHANGING OF THE CRIMPING INSERTS › By pressing the release of the crimping insert you can easily remove the insert. › Remove the crimping insert and put in the required insert
while pressing down the release.
Crimp Plier modular
*WHILE STOCKS LAST *WHILE STOCKS LAST
8148PRECISION STRIPPING TOOLfor data cables
› User-friendly, easy to handle, all-round cut. › Precision adjustment of cutting depth (adjuster wheel with 9 positions). › Replaceable blade. › Safe, rounded, pocket design. › Stripping capacity: 2.5 - 11mm. › Insulation thickness: up to 1.0mm.
8147HEAVY-DUTY CABLE STRIPPING TOOL › Professional wire stripping tool with 2 cable hooks. › Compact and user-friendly, even in the most di� cult conditions. › For cables (up to 40mmØ) with any kind of insulation. › Blade can be locked in one of three positions (circular, straight or spiral cuts). › Cable capacity: 4.5 - 40mmØ. › Insulation thickness: up to 4.5mm.
Dimensions: › with small cable hook: 150 x 42 x 30.5mm. › with large cable hook: 167 x 52 x 30.5mm. › E-8147 = Spare blade.
Code No. Ø
1830856 8147 * 4,5-40 1961884719 E-8147 Spare Blade * 2
Code No. Ø
1830864 8148 * 2,5-11 431884727 E-8148 Spare Blade * 2
Dimensions: › 90.5 x 39.5 x 19mm. › E-8148 = Spare blade.
81
S 8140 A
8140-05 8140-09 8140-11
S 8140 D
8140-14 8140-16 8140-17
Crimp Plier Sets
S 8140 ACRIMPING PLIERS SET AUTOMOTIVE4 pieces
› Practical set made up for speci� c requirements in automotive engineering. › Ideal for high-standard crimping. › Can be individually upgraded by purchasing
additional module inserts. › Module inserts changeable without tools. › In practical blister packaging.
S 8140 DCRIMPING PLIERS SET DATA COM4 pieces
› Practical set made up for speci� c requirements in data-communications installations. › Ideal for high-standard crimping. › Can be individually upgraded by purchasing additional
module inserts. › Module inserts changeable without tools. › In practical blister packaging.
S 8140 E
8140-01 8140-02 8140-05
S 8140 J
8140-02 8140-06 8140-18
S 8140 ECRIMPING PLIERS SET ELECTRONIC4 pieces
› Practical set made up for speci� c requirements for electricians. › Ideal for high-standard crimping. › Can be individually upgraded by purchasing additional
module inserts. › Module inserts changeable without tools. › In practical blister packaging.
S 8140 JCRIMPING PLIERS SET INDUSTRIAL4 pieces
› Practical set made up for speci� c requirements in industrial maintenance. › Ideal for high-standard crimping. › Can be individually upgraded by purchasing additional
module inserts. › Module inserts changeable without tools. › In practical blister packaging.
Code No. Contents
1830899 S 8140 E Cripmer 8140 Inserts 01 02 05 760
Code No. Contents
1830929 S 8140 J * Cripmer 8140 Inserts 02 06 18 752
*WHILE STOCKS LAST
*WHILE STOCKS LAST
*WHILE STOCKS LAST
*WHILE STOCKS LAST
Code No. Contents
1830910 S 8140 A * Cripmer 8140 Inserts 05 09 11 754
Code No. Contents
1830937 S 8140 D Cripmer 8140 Inserts 14 16 17 711
82
PLIERS
Circlip pliers for external retaining rings (shafts)
B M 8000 A 0 - A 4 - STRAIGHT
CIRCLIP PLIERS FOR EXTERNAL RETAINING RINGSForm A
› For retaining rings as per DIN 471, DIN 983. › DIN 5254 Form A. › Straight tips. › With opening spring. › With clamping protection.
› Forged Gedore Chrome Vanadium special hardened and tempered steel. › Precision machined, oil hardened and
annealed. › Black, with red dipped handles.
B N 8000 A 01 - A 41 - BENT
CIRCLIP PLIERS FOR EXTERNAL RETAINING RINGSForm B
› For retaining rings as per DIN 471, DIN 983. › DIN 5254 Form B. › 90° angled tips. › With opening spring. › With clamping protection.
› Forged Gedore Chrome Vanadium special hardened and tempered steel. › Precision machined, oil hardened and
annealed. › Black, with red dipped handles.
Code No. F E y
6701380 8000 A 0 5/32-3/8 3-10 141 966701460 8000 A 1 3/8-1 10-25 141 986701540 8000 A 2 3/4-2.3/8 19-60 182 1866701620 8000 A 3 1.5/8-4 40-100 230 3106701700 8000 A 4 3.3/8-5.1/2 85-140 320 555
Code No. F E y
6702270 8000 A 01 5/32-3/8 3-10 130 976702350 8000 A 11 3/8-1 10-25 130 976702430 8000 A 21 3/4-2.3/8 19-60 170 1826702510 8000 A 31 1.5/8-4 40-100 210 3176702780 8000 A 41 3.3/8-5.1/2 85-140 305 563
B M
B N 8000 A 5 - STRAIGHT
CIRCLIP PLIERS FOR EXTERNAL RETAINING RINGS
› Straight tips. › Black, tips and lock lever zinc plated. › The toothed bracket stops the plier legs from
straddling beyond the permitted working area. › This ensures safe working even in concealed
� tting positions. › Locking pin can be replaced.
› Non-crush type release lever with handle recesses, red dip insulated. › Precision machined, oil hardened and
annealed. › E-8000 A = pair of spare tips.
8000 A 51 - BENTCIRCLIP PLIERS FOR EXTERNAL RETAINING RINGS
› 90° angled tips. › Tips and lock lever zinc plated. › Lever handle end red dip insulated. › Finger protection.
› Reinforced safety arms. › Precision machined, oil hardened and
annealed. › E-8000 A = pair of spare tips.
Code No. F E y
6701890 8000 A 5 4.13/16-11.7/8 122-300 550 1900
Code No. 5701840 E-8000 A 5 Spare Tips 72
Code No. F E y
6702860 8000 A 51 4.13/16-11.7/8 122-300 560 1898
Code No. 5702810 E-8000 A 51 Spare Tips 112
83
A M
A N
Circlip pliers for internal retaining rings (bores)
8000 J 0 - J 4 - STRAIGHTCIRCLIP PLIERS FOR INTERNAL RETAINING RINGSForm C
› For retaining rings as per DIN 472, DIN 984. › DIN 5256 Form C. › Straight tips. › Forged Gedore Chrome Vanadium special
hardened and tempered steel.
› Precision machined, oil hardened and annealed. › Black, with blue dipped handles.
8000 J 01 - J 41 - BENTCIRCLIP PLIERS FOR INTERNAL RETAINING RINGSForm D
› For retaining rings as per DIN 472, DIN 984 › DIN 5256 Form D. › 90° angled tips. › Forged Gedore Chrome Vanadium special
hardened and tempered steel.
› Precision machined, oil hardened and annealed. › Black, with blue dipped handles.
Code No. D C y
6703240 8000 J 0 3/8-9/16 8-13 141 0.0806703320 8000 J 1 3/8-1 12-25 141 0.0816703400 8000 J 2 3/4-2.3/8 19-60 183 0.1646703590 8000 J 3 1.5/8-4 40-100 230 0.2816703670 8000 J 4 3.3/8-5.1/2 85-140 322 0.472
Code No. D C y
6704130 8000 J 01 3/8-9/16 8-13 129 0.0806704210 8000 J 11 3/8-1 12-25 129 0.0826704480 8000 J 21 3/4-2.3/8 19-60 169 0.1616704560 8000 J 31 1.5/8-4 40-100 214 0.2796704640 8000 J 41 3.3/8-5.1/2 85-140 292 0.484
A M
A N 8000 J 5 - STRAIGHT
CIRCLIP PLIERS FORINTERNAL RETAINING RINGS
8000 J 51 - BENTCIRCLIP PLIERS FOR INTERNAL RETAINING RINGS › 90° angled tips. › Black, tips and lock lever zinc plated. › Lever handle end blue dip insulated. › Finger protection.
› Reinforced safety arms. › Precision machined, oil hardened and
annealed. › E-8000 J = pair of spare tips.
Code No. D C y
6703750 8000 J 5 4.13/16-11.7/8 122-300 565 1836
Code No. 5703700 E-8000 J 5 Spare Tips 72
Code No. D C y
6704720 8000 A 51 4.13/16-11.7/8 122-300 575 1898
Code No. 5704780 E-8000 J 51 Spare Tips 116
› Straight tips. › Black, tips and lock lever zinc plated. › The toothed bracket stops the plier legs from
straddling beyond the permitted working area. › This ensures safe working even in concealed
� tting positions.
› Locking pin can be replaced. › Non-crush type release lever with handle
recesses, blue dip insulated. › Precision machined, oil hardened and
annealed. › E-8000 J = pair of spare tips.
84
PLIERS
B A M N
S 8000SET OF CIRCLIP PLIERS4 pieces
› Most popular sizes, packed in environmentally friendly cardboard box. › Particularly suitable for barely accessible places. › For internal and external circlip rings. › With straight and 90° angled tips.
Code No. Contents
6701030
S 8000 External: 8000-A2 Straight 8000-A21 AngledInternal: 8000-J2 Straight 8000-J21 Angled
756
Circlip Pliers Assortment
B A M N
1101-001SET OF CIRCLIP PLIERS8 pieces
› Most popular sizes, packed in sturdy plastic case. › Particularly suitable for barely accessible places. › For internal and external circlip rings. › With straight and 90° angled tips. › In Gedore i-BOXX® 72, with transparent cover for easy view.
Code No. Contents
1692275
1101-001 External: 8000-A1 Straight 8000-A11 Angled 8000-A2 Straight 8000-A21 AngledInternal: 8000-J1 Straight 8000-J11 Angled 8000-J2 Straight 8000-J21 Angled
1550
S 8000 JECIRCLIP PLIERS FOR INTERNAL RETAINING RINGS
Code No. Contents
3041999
S8000 JE Internal: 8000-JE 1 Straight 8000-JE 2 Straight Internal: 8000-JE 11 Angled 8000-JE 21 Angled
756
Code No. Contents
3041980 S8000 AE External: 8000-AE 1 Straight 8000-AE 2 Straight External: 8000-AE 11 Angled 8000-AE 21 Angled
756
B M N
S 8000 AECIRCLIP PLIERS FOR EXTERNAL RETAINING RINGS
A M N
NEW NEW
85
137GRIP WRENCHES
Code No. O y
640662 137 / 175 25 185 293640670 137 / 250 32 230 546
134STRAIGHT JAW GRIP WRENCH
› For secure clamping, gripping and holding. › Chrome Vanadium steel 31CrV3. › Nickel plated. › Jaws hardened to 50HRC. Three-point shaped bottom jaw, upper jaw with wire groove. › With adjusting screw and release lever with moulded plastic grip. › Safe release.
› For secure clamping, gripping and holding. › Chrome Vanadium steel 31CrV3. › Nickel plated. › Jaws hardened to 50HRC. › With adjusting screw and release lever with moulded plastic grip. › Safe release.
Code No. O y
745995 134 / 250 25 230 570
138WELDER'S GRIP WRENCH
138 YPROFILE-SECTION GRIP WRENCH
Code No. y
6407350 138 280 960
› For clamping strips and pro� le sections when welding. › Cast steel jaws. › Nickel plated. › Release lever blue dip insulated.
› For clamping bulky pro� le and angle sections. › Strong forged jaws. › GEDORE special chrome-vanadium steel, nickel-plated. › Release lever blue dip insulated.
Code No. O P y
6407860 138 Y 95 75 280 763
THE TOGGLE LEVER – A GIANT AMONG THE JOINTS
› Similar in construction to the human leg and consisting of hip, knee and ankle joints › The knee joint's intelligent power management is its unbeatable advantage: › Clever utilization of the physical lever laws *) › Rapid and powerful even with a reduced operating force › Ideal for optimum pressure and clamping operations
› Maximum pressing/clamping force with knee lever extended – even with automatic locking e� ect i.e. self-clamping e� ect (e.g. with grip pliers) relieved by operating the releasing lever › Constant high quality of work
Self-clamping e� ect – can only be cancelled by operating the releasing lever!
Grip Wrenches
86
PLIERS
Pipe Wrenches
Code No. O [ y
645036 225/250 34 1 250 580645044 225/300 44 1.1/4 300 770645052 225/350 49 1.1/2 350 1035645060 225/450 60 2 450 1630645079 225/600 76 2.1/2 600 3000645087 225/900 102 3.1/2 920 6780
Code No. O y
645303 227/200 34 190 415645311 227/250 49 245 785645344 227/300 55 300 1180645346 227/350 60 320 1625645354 227/450 76 410 2780645362 227/600 90 550 4190645370 227/900 140 800 9595645374 227/1200 210 1040 14500
Gedore heavy duty pipe wrenches are the ONLY pipe wrenches in South Africa with the SABS certified mark.
Code No. 545376 E 227 A / 200 Spring545384 E 227 A / 250 Spring545392 E 227 A / 350 Spring545406 E 227 A / 450 Spring545414 E 227 A / 600 Spring545422 E 227 A / 900 Spring545368 E 227 B / 200 Knurl545430 E 227 B / 250 Knurl545449 E 227 B / 350 Knurl545457 E 227 B / 450 Knurl545465 E 227 B / 600 Knurl545597 E 227 B / 900 Knurl545473 E 227 C / 200 Jaw & Pin545481 E 227 C / 250 Jaw & Pin545503 E 227 C / 350 Jaw & Pin545511 E 227 C / 450 Jaw & Pin545538 E 227 C / 600 Jaw & Pin545635 E 227 C / 900 Jaw & Pin545546 E 227 D / 200 Hook545554 E 227 D / 250 Hook545562 E 227 D / 350 Hook545570 E 227 D / 450 Hook545589 E 227 D / 600 Hook545643 E 227 D / 900 Hook545426 E 227 A / 1200545469 E 227 B / 1200545540 E 227 C / 1200545592 E 227 D / 1200
SABS System Certification p 8/30/07 10:50 AM Page 2
Composite
C M Y CM MY CY CMY K
DID YOU KNOW?
225PIPE WRENCHESStillson type
227PIPE WRENCHESAmerican pattern › For heavy duty applications. › Drop forged hook, hardened and tempered from selected carbon steel. › Jaw teeth induction hardened. › Spheroidal graphite cast handle. › Blue epoxy powder coated. › In accordance with SANS 1028.
› Drop forged, CHROME VANADIUM handle, hardened and tempered. › Drop forged hook, hardened and tempered from selected carbon steel. › Jaw teeth induction hardened. › Blue epoxy powder coated. › In accordance with SANS 1028.
Code No.
544027 E 225 A / 250 Frame544035 E 225 A / 300 Frame544043 E 225 A / 350 Frame544051 E 225 A / 450 Frame544078 E 225 A / 600 Frame544086 E 225 A / 900 Frame544825 E 225 B / 250 Knurl544833 E 225 B / 300 Knurl544841 E 225 B / 350 Knurl544868 E 225 B / 450 Knurl544876 E 225 B / 600 Knurl544884 E 225 B / 900 Knurl544922 E 225 C / 250 Hook544930 E 225 C / 300 Hook544949 E 225 C / 350 Hook544957 E 225 C / 450 Hook544965 E 225 C / 600 Hook544973 E 225 C / 900 Hook545007 E 225 D / 250 Pin545015 E 225 D / 300 Pin545023 E 225 D / 350 Pin545031 E 225 D / 450 Pin545058 E 225 D / 600 Pin545066 E 225 D / 900 Pin545252 E 225 EF / 250 Rivet & Spring545260 E 225 EF / 300 Rivet & Spring545309 E 225 EF / 350 Rivet & Spring545279 E 225 EF / 450 Rivet & Spring545317 E 225 EF / 600 Rivet & Spring545287 E 225 EF / 900 Rivet & Spring
225 SPARES 227 SPARES
Permit No. 9668 / 15323
Blue epoxy powder coated.In accordance with SANS 1028.
87
*WHILE STOCKS LAST
Code No. Pipe Size y
032000 210 / 50 10-60mm 510 1600032005 210 / 75 15-90mm 710 4400032010 210 / 100 27-115mm 950 8000032020 210 / 150 35-165mm 1140 11500032040 210 / 200 45-220mm 1320 13000
210PIPE WRENCHChain pipe wrench
› Double sided replaceable serrated jaws. › Selected carbon steel. › Drop forged, heat treated. › Red epoxy powder coated handle.
E 210ASPARE CHAIN & JAWS (PAIR)
032049 E 210 B / 50 Pair of Jaws032050 E 210 B / 75 Pair of Jaws032051 E 210 B / 100 Pair of Jaws032052 E 210 B / 150 Pair of Jaws032054 E 210 B / 200 Pair of Jaws
Code No. Chain Lengths032099 E 210 A / 50 Chain 325mm032100 E 210 A / 75 Chain 420mm032101 E 210 A / 100 Chain 530mm032102 E 210 A / 150 Chain 765mm032104 E 210 A / 200 Chain 960mm
142 10 JC
142 10 C
Water Pump / Universal Pliers
142UNIVERSAL PLIERS
143UNIVERSAL PLIERS6 settings
› According to DIN ISO 8976 Form B. › O� set gripping faces for self-gripping of nuts and pipes. › Pinch protector. › For pipes up to 1.1/2"
and nuts up to 38mm. › Slim handles with
forged serrations
145 10 C
145WATER PUMP PLIERS
› 145 10C = 7 settings. › 145 15C = 9 settings.
Code No. O y
6416260 142 10 C 38 250 0.3806416340 142 10 JC 38 260 0.4176416180 142 10 TL 38 255 0.3715537190 E 142 A/10 Spare Screw and Nut
Code No. O y
6410650 143 10 C 38 256 0.3405410600 E 143 A/10 Spare Screw and Nut
Code No. O y
6412000 145 10 C 39 250 0.3656412190 145 15 C * 50 375 0.8542962683 E 145 A/10 Spare Screw and Nut
142 10 TL
› According to DIN ISO 8976 Form C. › With safety box joint and protection against
blocking. › Fine adjustment. › 142 10 = 15 settings. › Single-hand adjustment for safe clamping. › Slim pliers head for places that are hard to
access. › Long slim jaws.
› O� set gripping faces for self-gripping – no slipping o� . › Gedore special Chrome Vanadium steel. › Induction rehardened serrated faces. › Model C = slim handles with forged serrations. › Model JC = chrome-plated, with 2-component
handles › Chrome Vanadium special steel.
88
PLIERS
Code No. y 0
2541300 8340 - 200JL 200 0.389
Code No. max. E z y 0
2675137 8178 - 460 5 18 460 1.6802675145 8178 - 620 7 24 620 2.4602675153 8178 - 780 8 30 780 4.7002675161 8178 - 900 9 36 900 5.000
Code No. y 0
2666324 8340Z - 200JL 200 0.389
1.
2.
10 N
10 N
300 N
30 : 1
8340 8340 Z
8340-200 JL
8340 Z-200 JL
Bolt Cutters
8340 / 8340 Z BOLT CUTTERS › Compact power bolt cutters with e� ective cutting performance. › Optimum lever action requires less e� ort. › Wear-free rotating/thrust block bolt to reduce sliding friction when cutting.
› From soft to hard wires up to 4mmØ. › The grooves in the blades prevent sliding while cutting.
› With a two-cut process, from soft to hard wires 4 to 6mmØ. › The extra cutting edge (1) serves as a � rst cut for thick bolts and engraves them. › In the second step, the main cutting edge (2) cuts through the bolt completely.
8340MINI BOLT CUTTERS › The positioning of the blades close to the joint
creates a particularly e� ective power to cutting ratio. › Blades additionally induction hardened
(63-65HRC).
› Precision cutting edges for soft wire up to 6.0mmØ, hard and piano wire up to 3.8mmØ. › Model JL = steel-grey, with blue dipped handle
protectors.
8340 ZMINI BOLT CUTTERS › Optimum lever action requires less e� ort. › Cutting edges additionally inductively hardened
(63 - 65HRC). › Double-sided milling near the joint ensures best
leverage for thicker wire diameters.
› Precision blades that can cut soft wire up to 6.0mmØ, hard wire up to 5,5mmØ and piano wire up to 3,8mmØ. › Model JL = steel-grey, with blue dipped handle
protectors.
› An e� ective force multiplication ratio of 1:30 near the cutting edge. › Force optimised, cutting near joint is guaranteed.
Code No. 2675196 E 8178 460 Replacement Cutting Head2675218 E 8178 620 Replacement Cutting Head2675226 E 8178 780 Replacement Cutting Head2675234 E 8178 900 Replacement Cutting Head
8178BOLT CUTTERS
› Accoding to DIN ISO 5743. › Double cam bolt adjustment. › Cutting head replaceable. › Cutters from Chrome Vanadium steel. › Maximum cutting performance 48HRC.
89
Code No. , Wall thickness y 0
4503400 220020 1/8-2” 10-60 2.0-6.3 380 2.90
Code No. 4503750 220220 Spare Wheel
Code No. y 0
675504 8516/250 250 0.525675547 8516/300 300 0.675
Code No. y 0
675784 8531/200 Left-hand Cutting 200 0.290675792 8531/250 Left-hand Cutting 250 0.455675806 8531/300 Left-hand Cutting 300 0.660
Code No. y 0
4515410 424-260 Right-hand Cutting * 160 530
Code No. y 0
4515760 425-260 Right-hand Cutting * 260 480
*WHILE STOCKS LAST *WHILE STOCKS LAST
Pipe Cutter
Tin Snips
8516scissors pattern
8531 straight pattern
424ideal pattern snips
425 figure snips
› American Pattern. › Carbon steel SAE1045. › Drop forged and heat treated.
› Cutting surfaces induction hardened. › Precision ground cutters. › Blue epoxy powder coated.
› English Pattern. › Carbon steel SAE1045. › Drop forged and heat treated.
› Cutting surfaces induction hardened. › Precision ground cutters. › Blue epoxy powder coated.
› For straight continuous and shape cutting. › With lever action. › Self-opening with installed spring and lock. › Polished cutting edges.
› Sheet thickness maximum 1.2mm at strength of 600N/mm2. › Non-slip two-component handles.
› For straight continuous and shape cutting. › With lever action. › Self-opening with installed spring and lock. › Polished cutting edges.
› Sheet thickness maximum 1.2mm at strength of 600N/mm2. › Non-slip two-component handles.
220for steel pipes
› Heavy duty pipe cutters. › Frame in malleable cast steel. › TUBEX®
AUTOMOTIVE TOOLS
TYRE FITMENT TOOLS
92
PISTON / VALVE TOOLS
95
MEASURING TOOLS
97
FILTER / SPARK PLUG TOOLS
93
SPECIAL PLIERS
95
SAWS
98
LIFTERS
94
TOOLKITS
100
BRAKE TOOLS
96
26RDOUBLE ENDED BOX SPANNERS › In tubular steel, hardened. › Chrome plated.
26RSSTEPPED TOMMY BAR
KD-26RBOX SPANNER SET7 pieces
› Chrome Vanadium steel 31CrV3, hardened. › Chrome plated.
27WHEEL SOCKET WRENCH
284-WAY WHEEL WRENCH
› Chrome Vanadium steel 31CrV3. › Chrome plated.
› Chrome Vanadium steel 31CrV3. › Blue epoxy powder coated.
*WHILE STOCKS LAST
92
AUTOMOTIVE TOOLS
Code No. y
6210050 26R 6x 7 105 286210210 26R 8x 9 110 356210640 26R 10x 11 120 456210990 26R 12x 13 140 756211370 26R 14x 15 140 906211610 26R 16x 17 150 1206211880 26R 17x 19 160 1806211960 26R 18x 19 160 1806212260 26R 20x 22 170 2106212340 26R 21x 23 170 2156212690 26R 24x 27 190 3006212770 26R 25x 28 200 3506213070 26R 30x 32 200 3806213310 26R 36x 41 220 650
Code No. y
652806 26RS 1 - Fits 26R 6x7 - 10x11 190 40652814 26RS 2 - Fits 26R 12x13 - 16x17 240 140652822 26RS 3 - Fits 26R 17x19 - 36x41 330 500
Code No. Contents Accessories 0
621846 KD-26R 8x9 10x11 12x13 14x15 16x17 18x19
26RS 2 Tommy Bar 0.685
Code No. Size y 0
622761 28 PU 17x19 21x22 420x420 1360622869 28 CV 19x20 24x27 595x583 36906229150 28 LV * 34.5x38 45x25.3 4900
Code No. y 0
026050 27-22x24 19 500 1700026060 27-24x27 19 500 1800026150 27-27x30 19 500 2300026155 27-27x32 21 500 2300026156 27-27x33 21 500 2300026165 27-30x32 21 500 2300026168 27-30x33 21 500 2300026170 27-32x33 21 500 2400026175 27-21x38 19 500 2300026180 27-21x41 21 500 2500
026052 27d/35d-19 (19.05mmx500) 19 500 1095026152 27d/35d-21 (20.89mmx500) 21 500 1300
Box Spanners Wheel Wrenches
38 / 39TYRE LEVERS
› Chrome Vanadium steel 31CrV3. › Drop forged. › 38 = Chrome plated. › 39 = Blue epoxy powder coated.
39
38
36OIL FILTER STRAP WRENCH › Chrome Vanadium steel 31CrV3. › Chrome plated. › Strong wide strap. › Light duty.
1.75OIL FILTER HOOK › Three-arm pattern. › For removing � rmly seated oil � lters.
Code No. y
6327320 36 / 1 220 3076327400 36 / 2 285 4705327380 E 36 / 1 Strap5327460 E 36 / 2 Strap
Code No. y
8117420 1.75/1 60-120 600
Filter Tools
93
Code No. y 0
633267 38 / 400 400 0.458633283 38 / 500 500 0.576633305 39 / 610 610 1.463
139PRY BARS
› Chrome Vanadium steel 31CrV3. › Drop forged.
Code No. y 0
1396597 139 - 350X19 Pry Bar 350 0.7971396598 139 - 450X19 Pry Bar 450 1.020
Pry Bars
SAWS 98
50SPARK PLUG SOCKET
› Chrome Vanadium steel 31CrV3. › Chrome plated. › To be used in conjuction with 1/2” drive socket accessories.
Code No. y
636614 50/20,8mm-13/16 63 119
Spark Plug Tools
Tyre Levers
54SPARK PLUG SOCKET
› Chrome Vanadium steel 31CrV3. › Chrome plated. › To be used in conjuction with 1/2” drive socket accessories.
55SPARK PLUG SPANNER
58SPARK PLUG SPANNER
› Chrome Vanadium steel 31CrV3. › Chrome plated. › Hot forged socket head with plug retainer, swivel joint. › Handle with blue PVC sleeve.
› Chrome Vanadium steel 31CrV3. › Hot forged socket head with plug retainer. › Chrome plated. › Swivel joint.
647SPARK PLUG BRUSH
› With plastic handle and brass wire bristles.
*INDENT ONLY
*INDENT ONLY
94
AUTOMOTIVE TOOLS
Code No. y
636622 54 / 16mm 63 96
Code No. y
636606 55 / 20,8mm 238 298
Code No. y
636355 58 / 16mm 301 330636339 58 / 20,8 mm 500 340636347 58 / 16 & T-Bar 301 455636312 58 / 20,8 & T-Bar 500 465636320 58 Tommy Bar 199 125
Code No. Bristle Length y
6531950 647 15mm 180 22
121 GSUCTION CUP LIFTER › Two hinged suction heads with safety locking. › Oil and acid resistant ABS plastic. › Lifting capacity approximately 80kg.
121 G-3SUCTION CUP LIFTER
› Three hinged suction heads with safety locking. › Oil and acid resistant ABS plastic. › For curved glass and panels. › Lifting capacity approximately 120kg.
Code No. , y 0
6391170 121 G * 120 390 1.25
Code No. , 0
6390870 121 G-3 * 120 1.27
Lifters
*WHILE STOCKS LAST
*WHILE STOCKS LAST
95
642 SPMAGNETIC LIFTERwith lamp, mirror and clip
640MAGNETIC LIFTER
› For searching for and picking up of small metal parts in con� ned areas. › Magnet can be removed if necessary. › Mirror diameter 30mm.
› With � exible shaft and plastic handle. › Bright nickel plated.
Code No. Diameter of magnet y
6536750 642 SP 12mm 500 172
Code No. Diameter of magnet y
6531280 640 12mm 520 230
125PISTON RING CLAMP BAND
› Made from special spring strip steel with continuous adjustment. › With tightening key.
Code No. , y 0
6396800 125-1 57-125 80 0.3106396990 125-2 90-175 80 0.3506397020 125-3 90-175 165 0.650
Pistons / Valves / Special Pliers
126PISTON RING PLIERS › For secure � tting of piston rings. › Handles with blue sleeves.
Code No. O y 0
6397370 126 1-100 55-100 200 0.2506397450 126 2-120 80-120 240 0.410
126-060PISTON RING PLIERS › For secure � tting of piston rings. › With prism holder and adjusting screw.
Code No. , y 0
6397100 126 0-60 * 30-60 210 0.160
128VALVE SPRING TENSIONER
› For overhead valve engines with one each straight and o� set pair of hooks. › Bright nickel plated. › Type 2-225 handle with blue sleeve.
Code No. , y 0
6398500 128 2-225 60-225 290 1.206398690 128 1-280 * 120-280 390 3.25
132HOSE CLAMP PLIERS
132 CLICCLIC HOSE CLAMP PLIERS
› For self-clamping hose clips. › Chrome plated handles.
› For CLIC-R hose clamps. › Polished, bright nickel plated, joint gunmetal � nished. › Forged for clip sizes 5-30mm.
Code No. y 0
6399900 132-220 * 220 0.215
Code No. y 0
1396714 132-180 * 180 0.247
8134INSTALLATION PLIERS
8276BALANCE WEIGHT PLIERS
› Chrome Vanadium steel 31CrV3. › Chrome Vanadium steel 31CrV3.
Code No. y 0
6722030 8134-170C * 170 0.200
Code No. y 0
6739350 8276-250C 250 0.315
› Chrome Vanadium steel 31CrV3. › For drum brakes. › With special holder and support crown, especially suitable for adhesive brake linings. › Chrome plated.
Code No. y 0
6405300 135 - 13 330 0.3706405490 135 -19 * 480 0.850
*WHILE STOCKS LAST
*INDENT ONLY
*INDENT ONLY
*INDENT ONLY
96
AUTOMOTIVE TOOLS
135BRAKE SPRING PLIERS
Measuring Tools
STEEL RULER
Code No. y q 0
0134000 Measuring Rule - 150mm 150 6 0.0500134100 Measuring Rule - 300mm 300 12 0.0600134300 Measuring Rule - 600mm 600 24 0.120
› Stainless steel with polished � nish. › Permanently engraved. › Metric to imperial conversion table on reverse side.
Brake Tools
97
› With protective handle. › Handle nickel plated. › Folding. › Blade length 100mm.
702FEELER GAUGE SET
Code No. Contents 0
6547790 702 13 M 5 10 15 20 25 30 40 50 60 70 80 90 100 0.0656547870 702 20 M 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 0.100 6547950 702 21 M 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 0.0686548680 702 13 A .002AF .003AF .004AF .005AF .006AF .008AF .010AF .012AF .015AF .020AF .025AF .030AF .035AF 0.0556548760 702 22 A .004 - .025 increasing by 1/1000” 0.0816548840 702 26 A .0015 - .025 increasing by 1/1000” 0.080
ENGINEERSSQUARE
Code No. Blade Length y 0
0110100 Engineers Square - 75mm 75 0.1150110200 Engineers Square - 100mm 100 0.1330110300 Engineers Square - 150mm 150 0.288
› Hardened blade. › Accurately ground blade and stock ensures
straightness and parallelism. › Accurate right angles on inside and outside. › Ideal for setting up and checking machinery.
PRECISIONENGINEERING TOOLS
INSIDE SPRING CALIPERINSIDE SPRING CALIPER
Code No. y q 0
0141100 Outside Spring Caliper 100 4 0.0800141200 Outside Spring Caliper 150 6 0.1330141300 Outside Spring Caliper 200 8 0.1800141400 Outside Spring Caliper 250 10 0.2500141500 Outside Spring Caliper 300 12 0.260
Code No. y q 0
0142000 Spring Divider 75 3 0.0800142100 Spring Divider 100 4 0.0800142200 Spring Divider 150 6 0.1330142300 Spring Divider 200 8 0.1800142400 Spring Divider 250 10 0.267
Code No. y q 0
0140100 Inside Spring Caliper 100 4 0.0850140200 Inside Spring Caliper 150 6 0.1330140300 Inside Spring Caliper 200 8 0.1800140400 Inside Spring Caliper 250 10 0.2400140500 Inside Spring Caliper 300 12 0.260
OUTSIDE SPRING CALIPER SPRING DIVIDER
Code No. y 0
0321001 Engineers Scriber 190 0.045
ENGINEERSSCRIBER
› Double-ended with one straight point and the other at 90 degrees. › Ideal for use in con� ned spaces.
98
AUTOMOTIVE TOOLS
› Dome shaped body. › Brass suction pump. › Heavy gauge tin. › Powder coated. › Pump has two ball valves. › Lack of spring on the bottom suction
valve prevents malfunctioning.
SAFETY GLASSES
› Euro type spectacles, polycarbonate lens CE (EN 166-2001). › Clear anti-scratch lens.
Code No. 0
200638 DV026C Safety Glasses & Bag 0.035
4530TOWROPE
Code No. y 0
669776 4530- 2 Ton 3500 0.310669806 4530- 4 Ton 3500 1.700
BRASS PUMPOIL CAN
Code No. Capacity (ml) 0
4163300 Brass Pump Oil Can 500 0.278
Miscellaneous
403HACKSAW
407HACKSAW
› Adjustable tubular steel frame. › For 10” and 12” hacksaw blades. › Shatterproof blades.
› Pressure cast aluminium. › Ergonomic soft rubber grips. › Adjust saw blade by turning blue clamping element in the hand grip.
Code No. y 0
039010 403 435 0.3605500350 403A Hacksaw Blade 24TPI - Pack of 10 300 0.120
Code No. 0
1879375 407 0.650
Saws
JUNIORHACKSAW
› Powder coated, steel wire frame. › Easy blade replacement. › Shatterproof blade. › Finger guard prevents injury.
Code No. 0
3012000 Junior Hacksaw 0.083
99
› Protection from unwanted scratches, dents and dirt. › Magnetic attachment keeps paintwork safe from damage – also attaches to galvanised steel. › Rugged, padded imitation leather and reinforced edges provide a perfect, cushioned working area. › Dimensions: 1100x650mm with wheel cut-out to allow easy acccess.
907FENDER PROTECTOR
Code No. y 0
1942956 907 1100 0.620
299DRAIN PLUG SPANNER
› Chrome Vanadium steel 31CrV3. › Chrome plated. › For square bungs on engine pumps, tanks and drums for oil and chemicals. › Five square sizes: 8.7 9.5 10.5 11.5 13mm › Four tapered sizes: 6.8-8.7 10.5-13 15.2-18 16.5-19mm › One screwdriver blade: 5.5 x 18mm
Code No. y 0
6464580 299 220 0.450
G-CLAMPS
Code No. y q 0
3580000 G-Clamp 75 3 0.5003580100 G-Clamp 100 4 0.9003580200 G-Clamp 150 6 1.4003580300 G-Clamp 200 8 1.500
905CREEPER
› Ergonomically shaped one-piece creeper. › With practical carrying handle › Made form PP (polypropylene) › Six swivel castors ensure easy, safe manoeuvrability › Two storage trays › Head and neck cushion for maximum comfort › Bucket moulding gives additional support and allows freedom of movement › Carrying capacity: 130kg › Temperature range: -30C to +60C › Dimensions: 1030 x 480 x 115mm
Code No. 0
1823698 905 5.00
Waist Pouch
› Fabric construction in 600D polyester canvas. › Water repellent and durable. › Toolbag: 38mm reinforced polypropylene webbing straps. › Waist Pouch: 25mm reinforced polypropylene webbing straps. › YKK zip and nickel rivets for additional reinforcing. › Reinforced loops for screwdrivers and pliers.
Code No. 0
545200 Zipped Tool Bag 0.350
Code No. 0
545210 Waist Pouch 0.200
Zipped Tool Bag
Tool Bags
TOOL BELTSTOOL BAG / WAIST POUCH
100
AUTOMOTIVE TOOLS
See pg. 228 for complete Rucksack Toolset.
TOOLS NOT INCLUDED
Code No. 0
545220 Tool case - EMPTY 2.25
TOOLS NOT INCLUDED
Code No. 0
545190 Rucksack - EMPTY 1.00
› High quality tear resistant fabric made from 600D polyester. › Strong industrial seams. › Universal size with four lateral buckles for resizing. › One back pocket with zips. › Two right-hand pockets and four left-hand pockets. › Elastic screwdriver holder. › Re� ector strips front and back for improved visibility.
Code No. 0
1818260 Tool Jacket 0.730
TOOL JACKET
Code No.
› Double stitched and bound. › Very durable water repellent inner lining. › Heavy duty zip. › Reinforced inners.
ELECTRICIAN‘S TOOL CASE
› 600x600D water repellent polyester fabric. › Double stitched and bound. › 10cf-thick extra heavy duty zip. › Three front velcro-closing pockets with re� ective strip. › Inside detachable divider with fabric sleeves to hold tools with clear velcro sleeve cover. › Reinforced padded back with reinforced padded back straps.
TOOL RUCKSACK
*WHILE STOCKS LAST
507LEISURE MOTORIST TOOLKIT
› In a black canvas case with zip fastener.
Code Contents 0
668097 2.36SpannersScrewdrivers
NO.6 8x9 10x11 12x13 14x15 16x17 19x222150 6.5 2160 PH2
Accessories26RST x 175 Socket & T-Bar60CP-250 Shifting Spanner145/250 Universal Pliers
Re� ective VestLeather Gloves
See pg. 223 for complete Electrcians Toolset.
*WHILE STOCKS LAST
101
*WHILE STOCKS LAST
SORTIMOGENERAL TOOL ASSORTMENT
› Dimensions: L=442 x W=357 x H=151mm.
Code Contents 0
677001 9.06Allen KeysScrewdrivers
Sockets
42-88M 2 2.5 3 4 5 6 8 102150 6.5 5.5-1502160 PH1 PH2 PH3D19 10 11 12 13 14 15 16 17 18 19 21 22 24
Accessories145-250 Waterpump Pliers95-200 Flat Cold ChiselVoltage Tester 140-2K1993U-10T Reversible Ratchet1987 Sliding T-bar
8601-500 Ball Pein Hammer
8250-200 JC Combination Pliers8316-200 JC Side Cutters1990-125 Extension1990-250 ExtensionNo.62 Adjustable Wrench - 200mm
502MOTORIST TOOLKIT
› In a black canvas case with zip fastener and carry strap.
Code Contents 0
651125 3.86SpannersScrewdrivers
Sockets
NO.6 10x11 12x13 14x15 16x17 19x222150 6.5 3-1502160 PH1 PH2C19 10-3/8 12 13-1/2 17 19-3/4 22
Accessories1990/125 Extension1993U-10K Plastic Ratchet9534-05 Tape Measure9930 Torch
62/200 Adjustable Wrench145/250 Universal Pliers4530 Tow Rope – 2-Ton9999.900 Multifunction Pliers
5017JAZZ TOOL ASSORTMENT
› Dimensions: L=440 x W=400 x H=100mm.
Code Contents 0
677010 9.12SpannersAllen KeysScrewdrivers
Sockets
No.7 10 11 12 13 14 15 16 17 1942-88M 2 2.5 3 4 5 6 8 102150 3-150 4-150 6.5 2160 PH1 PH2C19 10 11 12 13 14 15 17 19 22 24 No.20 5 6 7 8 9 10 11 12 13
Accessories1993 Z-94 Ratchet 2093 Z-94 Ratchet2087 Sliding T-Bar2088 Flexible Extension2090-4 ExtensionVoltage Tester 140-2K137-250 Grip Pliers8601-500 Ball Pein Hammer
1990-250 Extension1990-125 Extension1995 Universal Joint55/20.8 Spark Plug Spanner2090-6 Extension145-250 Universal Pliers8250 200JC Combination Pliers
SHEETMETAL
TOOL ASSORTMENTS
TOOLBOXES / TRAYS / TRUNKS
104
VICES
117
TOOL CHESTS
118
ASSORTMENTS / CABINETS
107
TOOL PANELS
117
ARTISANS WORKSTATIONS
116
DRAWER UNITS
117
MODULAR ASSORTMENTS
122
TOOL TROLLEYS
120
Code No. 0
660868 1260 4.700
Code No. 0
660876 1261 6.200
1261TOOLBOX5 compartments
› With riveted joins. › Strong structure, smooth and easy opening and closing. › Maximum access to bottom tray. › Lockable, phosphated and powder coated to prevent corrosion. › L=460 x W=248 x H=220mm.
Code No. 0
660957 1282/5 7.500
1282 / 5TOOLBOX5 compartments
› With riveted joins. › Strong structure, smooth and easy opening and closing. › Maximum access to bottom tray. › Plastic Handle: ZA Registration Design 2005/0507. › Lockable, phosphated and powder coated to prevent corrosion. › L=460 x W=248 x H=220mm. › Designed to accommodate all modular kits.
104
SHEETMETAL / TOOL ASSORTMENTS
Toolboxes
1260TOOLBOX3 compartments
› With riveted joins. › Strong structure, smooth and easy opening and closing. › Maximum access to bottom tray. › Lockable, phosphated and powder coated to prevent corrosion. › L=460 x W=248 x H=173mm.
Code No. 0
660949 1281 6.500
1281TOOLBOX5 compartments
› Robust, rust-free, rounded corners. › Cast-in lid hinges with non-removeable pins. Lockable. › Plastic Handle: ZA Registration
Design 2005/0507. › Phosphated and powder coated
to prevent corrosion. › L=460 x W=240 x H=220mm.
Code No. 0
661058 1335 6.000
1335TOOLBOX5 compartments
› With riveted joins › Strong structure, smooth and
easy opening and closing. › Maximum access to bottom tray. › Lockable, phosphated and
powder coated to prevent corrosion. › L=550 x W=248 x H=220mm.
Code No. 561347 1280/81-7M INS561134 1280/81-1B INS561169 1280/81-1B AF INS561142 1280/81-DI9 INS561126 1280/81-D19ACC INS561185 1280/81-22-ACC INS561193 1281/82-1B 62H INS561207 1280/81-D19/IN19 INS561215 1280/81-D19 ACC/SKT INS561258 1280/81-D32/6 INS561274 1280/81-PL/137/36 INS561283 1282-SD-PH-STB INS561291 1282-SD-MEC-EL INS561304 1282-4/ACC INS561312 1282 - EXT INS561322 1282 - 6SD INS561339 1282 - UTILITY INS561355 1282 - D20 EZ INS561363 1282 - PLIER INS561371 1282 - 1B 18 INS561398 1282 - 8601 ACC INS
TRAYSSHEETMETAL TRAYS
VACUUM MOULDED INSERTS
› Inserts Fit Into: 1281 / 1282 Toolboxes 1425 Tool Chest 1575 / 1581 Tool Trolleys 1502 Drawer Unit 1401 / 1404 Tool Cabinets
INSERTS
Code No. 561150 1280/81 - Metal Tray561266 1280/81 - D32 Metal Tray561401 1282 - Metal Tray561428 1282 - D32 Metal Tray
› Trays Fit Into: 1280 / 1281 / 1282 Toolboxes
MODULAR ASSORTMENTS 122
105
Die-cast Aluminium Toolbox
Tool Trunks
1460TOOL TRUNKS
› Strong structure, smooth operating hinges. › Lockable. › Phosphated and powder coated to prevent corrosion. › 1460: Silver galvanized tray is purchased separate. › 1460: Nests.
Code No. L H W 0
663837 1460-59 587 252 203 7.000663839 1460-65 651 284 280 7.000663840 1460-65S 651 284 280 7.000663841 1460-70 717 314 388 10.000663843 1460-80 801 379 471 14.000663844 1460-80S 801 379 471 14.000663845 1460-91 910 431 554 14.000
1425 / 27 / SP MODULAR ASSORTMENT 123 REF L-PL / 137 / 36 PLASTIC INSERT 126
106
SHEETMETAL / TOOL ASSORTMENTS
Code No. L
12
34
5
1460-91
Tool Assortments
1281-C19-1BMTOOL ASSORTMENT
d
1281 / 1282-C19-1BM-62TOOL ASSORTMENT
Code No. 1B Spanners Allen Keys Screwdrivers Toolbox / Inserts / Tray C19 Sockets Accessories 0
678511679003
1281-C19-1BM-621282-C19-1BM-62
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
42-88M 2 2,5 3 4 5 6 8 10
IN19 sockets5 6 8 10 12 14
21503-15044-1505.56.5821535.52160PH1PH22161PH2
1281 / 1282 Toolbox1281/82-1B/62 Insert1280/81-D19/IN19 Insert1280/81-D19 ACC/SKT Insert1282-SD-PH-STB Insert1282-SD-MEC-EL Insert1281 - 1280/81 Tray1282 - 1282 Tray
8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 18-11/16 19-3/4 21-13/16 22 24-15/16 26-1. 27-1.1/16 29-1.1/8 30-1.3/16 32-1.1/4 7/16AF 9/16AF 7/8AF
50/20.8 Spark Plug Socket143/250 Universal Pliers1990-75 Extension1990-125 Extension 1990-250 Extension 1995 Universal Joint62/250 Adjustable Wrench1987 Sliding T-Bar1993U-10T Ratchet
16.00017.000
d
Code No. 1B Spanners 42-88M Allen Keys Screwdrivers Toolbox / Inserts / Tray C19 Sockets Accessories 0
678155 1281-C19-1BM 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
2 2,5 3 4 5 6 8 10
215045.56.582160PH1PH2
1281 Toolbox1280/81 D19 ACC Insert1280/81 1B Insert1280/81 D19 Insert1280/81 Tray
8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 18-11/16 19-3/4 21-13/16 22 24-15/16 26-1. 27-1.1/16 29-1.1/8 30-1.3/16 32-1.1/4
50/20.8 Spark Plug Socket145/250 Universal Pliers1990-75 Extension1990-125 Extension1990-250 Extension137/250 Grip Pliers 1987 Sliding T-Bar 1993U-10T Rev. Ratchet1997/375 Power Bar1995 Universal Joint
15.860
*WHILE STOCKS LAST
*WHILE STOCKS LAST
107
*WHILE STOCKS LAST
Die-cast Aluminium
Die-cast Aluminium
1281 / 1282-D19-1BM-62TOOL ASSORTMENT
Code No. 1B Spanners Allen Keys Screwdrivers Toolbox / Inserts / Tray D19 Sockets Accessories 0
678554679070
1281-D19-1BM-621282-D19-1BM-62
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
42-88M 2 2,5 3 4 5 6 8 10
IN19 sockets5 6 8 10 12 14
21503-15044-1505.56.5821535.52160PH1PH22161PH2
1281 / 1282 Toolbox1281/82-1B/62 Insert1280/81-D19/IN19 Insert1280/81-D19 ACC/SKT Insert1282-SD-PH-STB Insert1282-SD-MEC-EL Insert1281 - 1280/81 Tray1281 - 1282 Tray
8 10 11 12 13 14 15 16 17 19 21 22 23 24 26 27 28 30 32 7/16AF 9/16AF 7/8AF
50/20.8 Spark Plug Socket143/250 Universal Pliers1990-75 Extension1990-125 Extension 1990-250 Extension 1995 Universal Joint62/250 Adjustable Wrench1987 Sliding T-Bar1993U-10T Rev. Ratchet
16.00017.000
Die-cast Aluminiumd
1281-D19-1BA-U3TOOL ASSORTMENT
Die-cast Aluminium d
Code No. 1B Spanners Allen Keys Screwdrivers Toolbox / Inserts / Tray D19 Sockets Accessories 0
678597 1281-D19-1BA-U3 1/4AF 5/16AF 3/8AF 7/16AF 1/2AF 9/16AF 5/8AF 11/16AF 3/4AF 13/16AF 7/8AF 15/16AF 1. AF
42-88P 3/32AF 1/8AF 5/32AF 3/16AF 7/32AF 1/4AF 5/16AF 3/8AF
IN19 sockets3/16AF 1/4AF 5/16AF 3/8AF 1/2AF 9/16AF
21503-15044-1505.56.5821535.52160PH1PH22161PH2
1281 Toolbox1280/81-1B AF. Insert1280/81-D19 ACC Skt Insert1280/81-D19/IN19 Insert1280/81 Tray
5/16AF 3/8AF 13/32AF 7/16AF 1/2AF 9/16AF 19/32AF 5/8AF 11/16AF 3/4AF 25/32AF 13/16AF 7/8AF 15/16AF 1. AF 1.1/16 1.1/8 1.3/16 1.1/4
50/20.8 Spark Plug Socket142/250 Universal Pliers137/250 Grip Pliers702/13 A Feeler Gauge Set1987 Sliding T-Bar1990-75 Extension 1990-125 Extension 1990-250 Extension 1995 Universal Joint1993U-3 Rev. Ratchet
16.220
*WHILE STOCKS LAST
*WHILE STOCKS LAST
108
SHEETMETAL / TOOL ASSORTMENTS
1282-C19-1BM-62-PLTOOL ASSORTMENT
d
Code No. 1B Spanners Allen Keys Screwdrivers Toolbox / Inserts / Tray C19 Sockets Accessories 0
679240 1282-C19-1BM-62-PL 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
42-88M 2 2,5 3 4 5 6 8 10
IN19 sockets5 6 8 10 12 14
215045.56.582160PH1PH2
1282 Toolbox1281/82-1B/62 Insert1280/81-D19/IN19 Insert1280/81-D19 ACC/SKT Insert1282 - 6SD Insert1282 - Pliers Insert1282 Tray
8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 18-11/16 19-3/4 21-13/16 22 24-15/16 26-1. 27-1.1/16 29-1.1/8 30-1.3/16 32-1.1/4 7/16AF 9/16AF 7/8AF
50/20.8 Spark Plug Socket62/250 Adjustable Wrench143/250 Universal Pliers1987 Sliding T-Bar1990-75 Extension1990-125 Extension 1990-250 Extension 1995 Universal Joint1993U-10T Rev. Ratchet
Pliers8132-200 JC Telephone Pliers8250-200 JC Combination Pliers8316-200 JC Side Cutters
18.500
1282-D19-1BM-62-PLTOOL ASSORTMENT
d
Code No. 1B Spanners Allen Keys Screwdrivers Toolbox / Inserts / Tray D19 Sockets Accessories 0
679267 1282-D19-1BM-62-PL 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
42-88M 2 2,5 3 4 5 6 8 10
IN19 sockets5 6 8 10 12 14
215045.56.582160PH1PH2
1282 Toolbox1281/82-1B/62 Insert1280/81-D19/IN19 Insert1280/81-D19 ACC/SKT Insert1282 - 6SD Insert1282 - Pliers Insert1282 Tray
8 10 11 12 13 14 15 16 17 19 21 22 23 24 26 27 28 30 32 7/16AF 9/16AF 7/8AF
50/20.8 Spark Plug Socket62/250 Adjustable Wrench143/250 Universal Pliers1987 Sliding T-Bar1990-75 Extension1990-125 Extension 1990-250 Extension 1995 Universal Joint1993U-10T Rev. Ratchet
Pliers8132-200 JC Telephone Pliers8250-200 JC Combination Pliers8316-200 JC Side Cutters
18.500
109
1282-C19Z-1BM-62TOOL ASSORTMENT
d
Code No. 1B Spanners Allen Keys Screwdrivers Toolbox / Inserts / Tray C19 Sockets Accessories 0
679119 1282-C19Z-1BM-62 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
42-88M 2 2,5 3 4 5 6 8 10
IN19 sockets5 6 8 10 12 14
21503-15044-1505.56.5821535.52160PH1PH22161PH2
1282 Toolbox1281/82-1B/62 Insert1280/81-D19/IN19 Insert1280/81-D19 ACC/SKT Insert1282-SD-PH-STB Insert1282-SD-MEC-EL Insert1282 Tray
8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 18-11/16 19-3/4 21-13/16 22 24-15/16 26-1. 27-1.1/16 29-1.1/8 30-1.3/16 32-1.1/4 7/16AF 9/16AF 7/8AF
50/20.8 Spark Plug Socket143/250 Universal Pliers62/250 Adjustable Wrench1987 Sliding T-Bar1990-75 Extension1990-125 Extension 1990-250 Extension 1995 Universal Joint1993Z-94 Ratchet +Coupler
18.500
1282-C19-1BMZ-PL-6SDTOOL ASSORTMENT
d
Code No. 1B Spanners Allen Keys Screwdrivers Toolbox / Inserts / Tray C19 Sockets Accessories 0
679232
679408
1282-C19-1BMZ-PL-6SD (plastic inserts)1282-FM-C19-1BMZ-PL-6SD (foam inserts)
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
42-88M 2 2,5 3 4 5 6 8 10
215045.56.582160PH1PH2
1282 Toolbox1280/81-DI9 Insert1280/81-1B Insert1282 - EXT Insert1282 - 6SD Insert1282 - Pliers Insert1282 Tray
8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 18-11/16 19-3/4 21-13/16 22 24-15/16 26-1. 27-1.1/16 29-1.1/8 30-1.3/16 32-1.1/4
137/250 Grip Pliers 145/250 Universal Pliers1987 Sliding T-Bar1990-75 Extension1990-125 Extension1990-250 Extension 1993Z-94 Ratchet + Coupler
Pliers8132-200 JC Telephone Pliers8250-200 JC Combination Pliers8316-200 JC Side Cutters
18.000
High-density foam insertsPlastic inserts
110
SHEETMETAL / TOOL ASSORTMENTS
High-density foam inserts
1282-D19-1BMZ-PL-6SDTOOL ASSORTMENT
d
1282-C19-1BMZ-10SDTOOL ASSORTMENT
d
Code No. 1B Spanners Allen Keys Screwdrivers Toolbox / Inserts / Tray D19 Sockets Accessories 0
679259 1282-D19-1BMZ-PL-6SD
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
42-88M 2 2,5 3 4 5 6 8 10
215045.56.582160PH1PH2
1282 Toolbox1280/81-DI9 Insert1280/81-1B Insert1282 - EXT Insert1282 - 6SD Insert1282 - Pliers Insert1282 Tray
8 10 11 12 13 14 15 16 17 19 21 22 23 24 26 27 28 30 32
137/250 Grip Pliers145/250 Universal Pliers1987 Sliding T-Bar1990-75 Extension1990-125 Extension1990-250 Extension 1993Z-94 Ratchet + Coupler
Pliers8132-200 JC Telephone Pliers8250-200 JC Combination Pliers8316-200 JC Side Cutters
18.500
Code No. 1B Spanners Allen Keys Screwdrivers Toolbox / Inserts / Tray C19 Sockets (679135) Accessories 0
679135679291
1282-C19-1BMZ-10SD 1282-D19-1BMZ-10SD
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
42-88M 2 2,5 3 4 5 6 8 10
21503-15044-1505.56.5821535.52160PH1PH22161PH2
1282 Toolbox1280/81-DI9 Insert1280/81-1B Insert1282 - EXT Insert1282-SD-PH-STB Insert1282-SD-MEC-EL Insert1282 Tray
8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 18-11/16 19-3/4 21-13/16 22 24-15/16 26-1. 27-1.1/16 29-1.1/8 30-1.3/16 32-1.1/4
D19 Sockets (679291)8 10 11 12 13 14 15 16 17 18 19 21 22 24 26 27 29 30 32
137/250 Grip Pliers145/250 Universal Pliers1987 Sliding T-Bar1990-75 Extension1990-125 Extension1990-250 Extension1993Z-94 Ratchet + Coupler
19.50019.500
111
1281-C19/22-1BA-U3TOOL ASSORTMENT
d
Code No. 1B Spanners Allen Keys Screwdrivers Toolbox / Inserts / Tray C19 Sockets Accessories 0
678589 1281-C19/22-1BA-U3 1/4AF 5/16AF 3/8AF 7/16AF 1/2AF 9/16AF 5/8AF 11/16AF 3/4AF 13/16AF 7/8AF 15/16AF 1.AF
42-88P 3/32AF 1/8AF 5/32AF 3/16AF 7/32AF 1/4AF 5/16AF 3/8AF
21503-15044-1505.56.5821535.52160PH1PH22161PH2
1281 Toolbox1280/81-1B AF. Insert1280/81-DI9 Insert1280/81-22 ACC Insert1280/81 Tray
8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 18-11/16 19-3/4 21-13/16 22 24-15/16 26-1. 27-1.1/16 29-1.1/8 30-1.3/16 32-1.1/4 7/16AF 9/16AF 7/8AF
50/20.8 Spark Plug Socket137/250 Grip Pliers141/250 Universal Pliers1987 Sliding T-Bar1990-75 Extension 1990-125 Extension 1990-250 Extension1997/375 Power Bar 1995 Universal Joint1993U-3 Rev. Ratchet
16.420
1281/1282-C19/22-1BM-10SDTOOL ASSORTMENT
d
Code No. 1B Spanners Allen Keys Screwdrivers Toolbox / Inserts / Tray C19 Sockets Accessories 0
678538679011
1281-C19/22-1BM-10SD1282-C19/22-1BM-10SD
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
42-88M 2 2,5 3 4 5 6 8 10
21503-15044-1505.56.5821535.52160PH1PH22161PH2
1281/1282 Toolbox1281/2 1280/81-1B Insert 1280/81-D19 Insert 1280/81-22-ACC Insert1282 1282-SD-PH-STB Insert1282-SD-MEC-EL Insert1280/81 Tray1282 Tray
8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 18-11/16 19 21-13/16 22 24-15/16 26-1. 27-1.1/16 29-1.1/8 30-1.3/16 32-1.1/4 7/16AF 9/16AF 7/8AF
50/20.8 Spark Plug Socket137/250 Grip Pliers145/250 Universal Pliers1987 Sliding T-Bar1990-75 Extension1990-125 Extension 1990-250 Extension 1997/375 Power Bar1995 Universal Joint1993U-10T Rev. Ratchet
16.50018.500
Die-cast Aluminium
Die-cast Aluminium
*WHILE STOCKS LAST
*WHILE STOCKS LAST
112
SHEETMETAL / TOOL ASSORTMENTS
1281/1282-D19/22-1BM-10SDTOOL ASSORTMENT
d
Code No. 1B Spanners Allen Keys Screwdrivers Toolbox / Inserts / Tray D19 Sockets Accessories 0
678546679089
1281-D19/22-1BM-10SD1282-D19/22-1BM-10SD
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
42-88M 2 2,5 3 4 5 6 8 10
21503-15044-1505.56.5821535.52160PH1PH22161PH2
1281/1282 Toolbox1281/2 1280/81-1B Insert 1280/81-D19 Insert 1280/81-22-ACC Insert1282 1282-SD-PH-STB Insert1282-SD-MEC-EL Insert1280/81 Tray1282 Tray
8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24 26 27 28 29 30 32
50/20.8 Spark Plug Socket137/250 Grip Pliers145/250 Universal Pliers1987 Sliding T-Bar1990-75 Extension1990-125 Extension 1990-250 Extension 1997/375 Power Bar1995 Universal Joint1993U-10T Rev. Ratchet
16.50018.500
Die-cast Aluminium
1281/1282-C32/19-1BM-62TOOL ASSORTMENT
d
e
Code No. 1B Spanners Allen Keys Screwdrivers Toolbox / Inserts / Tray C19 / C32 Sockets Accessories 0
678740679038
1281-C32/19-1BM-621282-C32/19-1BM-62
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
42-88M 2 2,5 3 4 5 6 8 10
IN19 sockets5 6 8 10 12 14
21503-15044-1505.56.5821535.52160PH1PH22161PH2
1281/1282 Toolbox1281/2 1281/82-1B/62 Insert 1280/81-D19/IN19 Insert 1280/81-D19 ACC/SKT Insert1280/81-D32/6 Insert1282 1282-SD-PH-STB Insert1282-SD-MEC-EL Insert1280/81 - D32 Tray1282 - D32 Tray
C19 8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 18-11/16 19-3/4 21-13/16 22 24-15/16 26-1. 27-1.1/16 29-1.1/8 30-1.3/16 32-1.1/4 7/16AF 9/16AF 7/8AF
C32 1.3/8AF 36-1.7/16 38-1.1/2 41-1.5/8 46-1.13/16 50-2.
50/20.8 Spark Plug Socket62/250 Adjustable Wrench143/250 Universal Pliers1987 Sliding T-Bar1990-75 Extension1990-125 Extension 1990-250 Extension 1995 Universal Joint1993U-10T Rev. Ratchet3287/447 Sliding T-Bar3290-200mm Extension3290-400mm Extension3293U-1/440 Ratchet
25.50026.500
Die-cast Aluminium
*WHILE STOCKS LAST
*WHILE STOCKS LAST
113
1282-D32/19-1BM-62TOOL ASSORTMENT
d
e
Code No. 1B Spanners Allen Keys Screwdrivers Toolbox / Inserts / Tray D19 / D32 Sockets Accessories 0
679097 1282-D32/19-1BM-62 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
42-88M 2 2,5 3 4 5 6 8 10
IN19 5 6 8 10 12 14
21503-15044-1505.56.5821535.52160PH1PH22161PH2
1282 Toolbox1280/81-1B/62 Insert1280/81-D19/IN19 Insert1280/81-D19 ACC/SKT Insert1280/81-D32/6 Insert1282-SD-PH-STB Insert1282-SD-MEC-EL Insert1282 - D32 Tray
D19 8 10 11 12 13 14 15 16 17 19 21 22 23 24 26 27 28 30 32 7/16AF 9/16AF 7/8AF
D32 34 36 38 41 46 50
50/20.8 Spark Plug Socket62/250 Adjustable Wrench143/250 Universal Pliers1987 Sliding T-Bar1990-75 Extension1990-125 Extension 1990-250 Extension 1995 Universal Joint1993U-10T Rev. Ratchet3287/447 Sliding T-Bar3290-200mm Extension3290-400mm Extension3293U-1/440 Rev. Ratchet
25.610
Tool Cabinets
1401 / 1401 PROTOOL CABINET / ASSORTMENT
d
Code No. 1B Spanners Allen Keys Screwdrivers Tool Cabinet C19 Sockets Accessories 0
661163 1401 PRO - With Accessories and Tools
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
42-88M 2 2,5 3 4 5 6 8 10
IN19 5 6 8 10 12 14
21503-15044-1505.56.5821535.52160PH1PH22161PH2
1401
Accessories30 x Plastic Holders with Pins1 x Tool Rack: 17-Pin1 x Double Storage Tray1 x Screwdriver Rack: 6-Piece1 x Punch Holder
8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 18-11/16 19-3/4 21-13/16 22 24-15/16 26-1. 27-1.1/16 29-1.1/8 30-1.3/16 32-1.1/4 7/16AF 9/16AF 7/8AF
50/20.8 Spark Plug Socket62/250 Adjustable Wrench137/250 Grip Pliers143/250 Universal Pliers225/250 Pipe Wrench1987 Sliding T-Bar1990-75 Extension1990-125 Extension 1990-250 Extension 1993Z-94 Ratchet + Coupler1995 Universal Joint8531/300 Tin Snips8601/500 Ball Pein Hammer
55.000
› Ideal for the professional workshop. › Rigid sheetmetal structure with precision CNC punched pegboard. › Three easy-slide drawers incorporating extra strong ball bearing slide mechanisms. › One moveable tray, spanner and screwdriver rack and an assortment of moveable hanging
hooks for maximum � exibility. › Lockable. › Phosphated to prevent corrosion. Blue and grey powder coated. › L=650 x W=250 x H=970. * Picture for illustration purposes only.
Contents/accessories may di� er.
Code No. Accessories 0
661155 1401 - EMPTY with Accessories 30 x Plastic Holders with Pins 1 x Tool Rack: 17-Pin 1 x Screwdriver Rack: 6-Piece 1 x Double Storage Tray 1 x Punch Holder 45.000
114
SHEETMETAL / TOOL ASSORTMENTS
1401L / 1401L PROTOOL CABINET / ASSORTMENT
d
Code No. Spanners Allen Keys Screwdrivers Tool Cabinet C19 Sockets Accessories 0
662608 1401L PRO - With Accessories and Tools
1B/17M 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
No.2/11M 6x7 8x9 10x11 12x13 14x15 16x17 17x19 18x19 20x22 21x23 24x30
534/9M 10 11 12 13 14 15 16 17 19
42-88M 2 2,5 3 4 5 6 8 10
IN19 5 6 8 10 12 14
42KL-7M 1,5 2 2,5 3 4 5 6
43TX-9M T7 T8 T9 T10 T15 T20 T25 T30 T40
21503-15044-1505.56.5821535.52160PH1PH22161PH2
1401L
Accessories1 x Hook 1 Pin: 10-piece1 x Tool Rack: 17-Pin1 x Double Storage Tray1 x Screwdriver Rack: 10-Piece
8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 19-3/4 22 23 24-15/16 26-1. 27-1.1/16 28 30-1.3/16 32-1.1/4
43TV Torx® Gauge Tester403 Hacksaw9534.05 Tape Measure9930.000 Torch1987 Sliding T-Bar1995 Universal Joint1990-75 Extension1990-125 Extension1990-250 Extension1993Z-94 PZK Ratchet & Coupler227/350 Pipe Wrench1993 U-10K Plastic Ratchet36/1 Strap Wrench145/250 Multigrip Pliers62/300 Adjustable Wrench8380-250TL Tower Pincers8516-300 Tin Snips8601-500 Ball Pein Hammer106 Tool Punch Set137/250 Grip Pliers4611 Power Tester8132-200JC Telephone Pliers8316-200JC Side Cutters8250-200JC Combination PliersS8000 Circlip Pliers Set50-20.8 Spark Plug SocketD30 FMZ Socket SetVDE ELS/PH Screwdriver Set
115.400
› Ideal for the professional workshop. › Rigid sheetmetal structure with precision
CNC punched pegboard. › Five easy-slide drawers incorporating
extra strong ball bearing slide mechanisms. › One moveable tray, spanner and screwdriver
rack and an assortment of moveable hanging hooks for maximum � exibility. › Lockable. › Phosphated to prevent corrosion. Blue and grey
powder coated. › L=1300 x W=250 x H=970.
* Picture for illustration purposes only. Contents/accessories may di� er.
Code No. Accessories 0
662607 1401L - EMPTY with Accessories 1 x Hook 1 Pin: 10-Piece 1 x Double Storage Tray 1 x Tool Rack: 17-Pin 1 x Screwdriver Rack: 10-Piece 90.000
ENGINEERING VICE 117 WORKSTATIONS 116
115
1404 / 1404 PROTOOL CABINET / ASSORTMENT
d
Code No. 1B Spanners Allen Keys Screwdrivers Tool Cabinet C19 Sockets Accessories 0
663115 1404 PRO *With Accessories and Tools
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
42-88M 2 2,5 3 4 5 6 8 10
IN19 5 6 8 10 12 14
21503-15044-1505.56.5821535.52160PH1PH22161PH2
1404
Accessories30 x Plastic Holders with Pins1 x Tool Rack: 6-Pin1 x Tool Rack: 17-Pin2 x Large Storage Trays6 x Small Storage Trays1 x Screwdriver Rack
8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 18-11/16 19-3/4 21-13/16 22 24-15/16 26-1. 27-1.1/16 29-1.1/8 30-1.3/16 32-1.1/4 7/16AF 9/16AF 7/8AF
50/20.8 Spark Plug Socket62/250 Adjustable Wrench137/250 Grip Pliers143/250 Universal Pliers225/250 Pipe Wrench403 Hacksaw1987 Sliding T-Bar1990-75 Extension1990-125 Extension1990-250 Extension 1993Z-94 Ratchet + Coupler1995 Universal Joint9534.05 Tape Measure8132-200 JC Telephone Pliers8250-200 JC Combination Pliers8316-200 JC Side Cutters8531/300 Tin Snips8601/500 Ball Pein Hammer
55.000
› Ideal for the professional workshop. › Rigid sheetmetal structure with precision
CNC punched pegboard. › Three easy-slide drawers incorporating
extra strong ball bearing slide mechanisms. › 80mm-deep doors to accommodate numerous accessories – moveable
shelves, hanging rack and screwdriver rack. › Doors: ZA Registered Design – A2006/01314 & F2006/01315. › Lockable. › Phosphated to prevent corrosion. Blue and grey powder coated. › L=650 x W=345 x H=970.
* Picture for illustration purposes only. Contents/accessories may di� er.
Code No. Accessories 0
662976 1404 - EMPTY with Accessories 30 x Plastic Holders with Pins 1 x Tool Rack: 17-Pin 1 x Tool Rack: 6-Pin 6 x Small Storage Trays 2 x Large Storage Trays 1 x Screwdriver Rack 47.000
Workstations / Vices / Drawer Units / Tool Panels
1500W / 1500MARTISAN WORKSTATION
› Ideal for the professional workshop or DIY enthusiast.Galvanised Metal Top
Wooden Top
Code No. Surface L W H 0
663166 1500-12 W Wooden 1200 mm 700 mm 900 mm 34.000663174 1500-15 W Wooden 1500 mm 700 mm 900 mm 43.900663182 1500-20 W Wooden 2000 mm 700 mm 900 mm 53.000663557 1500-12 M Galvanised Metal 1200 mm 700 mm 900 mm 47.800663565 1500-15 M Galvanised Metal 1500 mm 700 mm 900 mm 53.200663573 1500-20 M Galvanised Metal 2000 mm 700 mm 900 mm 59.000
Drawer unit not included
*WHILE STOCKS LAST
116
SHEETMETAL / TOOL ASSORTMENTS
MV100 / MV150MECHANIC
,S VICE
EV150 / EV200ENGINEERING VICE
› All steel construction. › Cast iron nut on spindle. › Robotic welded construction. › Steel anvil block.
› Heavy duty engineering vice. › All steel robot welded construction. › Robust sturdy design which can withstand hammer strikes. › Replaceable spindle and nut, the nut being virtually unbreakable. › Replaceable jaw plates, which are serrated for better grip. › Jaw inserts case hardened to between 540-650 HV (52-57 Rockwell). › Proof load kn (kiloNewton): 150mm-54kN 200mm-90kN. › Tensile strength of handle – 425 MPa – complies with SANS 6892.
Code No.
7400001 MV-100mm Jaw Set Insert7400002 MV-150mm Jaw Set Insert7400100 MV-100mm Spindle & Nut Set7400150 MV-150mm Spindle & Nut Set
MV100 / MV150SPARES
Code No.
7500001 EV-150mm Jaw Set Insert7500002 EV-200mm Jaw Set Insert7500004 EV-150mm & EV-200mm Spring7500005 EV-150mm & EV-200mm Handle7500006 EV-150mm & EV-200mm Spindle Only7500003 EV-150mm & EV-200mm Nut Only
EV150 / EV200SPARES
1502DRAWER UNITS
› Sheetmetal drawer units for 1500 workbenches. › Ideal for the professional workshop or DIY enthusiast. › Rigid sheetmetal pegboard structure. › Numerous accessory options available. › Phosphated to prevent corrosion. › Grey powder coated. › L=570 x W=20 x H=1010mm.
1450STOOL PANEL
* Tools not included.
Code No. O y 0
6500640 MV-100mm 125 100 7.6006500720 MV-150mm 175 150 13.400
Code No. O y 0
3351150G EV-150mm 175 150 25.0003350200G EV-200mm 225 200 45.500
Code No. L W H 0
663506 1502 / 2 565 395 365 18.500663522 1502 / 3 565 395 365 19.200
Code No. 0
663123 1450S - Pegboard Only 4.900663352 1450S - With Accessories (Tools Not Included) 5.200
Accessories 1 x PA-H3 Tool Rack: 17-Pin 10 x PA-H1 Hook: 1-Pin
117
Pegboard Accessories › The following accessories are for the 1401, 1401L, 1404 and 1450S
A B C
D E F G
Code No. 664111 PA-H1 Hook: 1-Pin, 10-Piece A664014 PA-H2 Tool Rack: 6-Pin B
664022 PA-H3 Tool Rack: 17-Pin C
664030 PA-T1 Small Storage Tray D
664049 PA-T2 Large Storage Tray E
664057 PA-T3 Double Storage Tray F
Code No. 664065 PA-T4 Screwdriver Rack - Holds 11 Screwdrivers G664138 PA- Starter Pack
Contents
10 x PA-H1 Hook: 1-Pin 1 x PA-H3 Tool Rack: 17-Pin 1 x PA-T4 Screwdriver Rack - Holds 11 Screwdrivers 1 x PA-T3 Double Storage Tray
1425 / 3TOOL CHEST / ASSORTMENT
bd
Code No. Tool Chest 1425/41/1B Foam Insert 1425/41/D19 Foam Insert 1425/27/SP Foam Insert 0
660967 1425 / 3 Workshop - With Tools
1425 / 3 1B 6-24 Spanners (18)60CP-250 Shifting Spanner
C19 8-32 Sockets (24)No.50/20.8 Spark Plug SKT1987 Sliding T-BarIN19 5-19 Sockets (10)TX19 E10-24 Sockets (8)1990/75mm Extension1990/125mm Extension1990/250mm Extension
ITX19 T20-T50 Sockets (7)No.20 4-13 Sockets (11)2093Z/94 Ratchet + Coupler2090/4 Extension2098 Driving Handle1993-U10T Rev. Ratchet1997/375mm Swivel Handle1995 Universal Joint
2150 8 (Mechanic’s S/D)2150 6.5 (Mechanic’s S/D)2150 4-150 (Electrician’s S/D)2150 6.5-200 (Electrician’s S/D)2160 PH1 (Phillips S/D)2160 PH2 (Phillips S/D)2160 PH3 (Phillips S/D)42/88M Allen Key Set
8132/200 Telephone Pliers8250/200 Combination Pliers8316-200 Side Cutters137/250 Vice Grip145/250 Universal Pliers43TX/09 TORX® Allen Key Set
43.500
› Four-compartment sheetmetal tool chest. › Lockable. › Three easy-slide drawers, incorporating full extension ball bearing slide mechanisms. › Drawer latch incorporated into each drawer. › Strong structure, smooth operating hinges. › Retractable spring-loaded handles. › Load capacity per drawer 35kg. › Phosphated and powder coated to prevent corrosion. › High-density foam inserts. › L=687 x W=400 x H=362mm.
Code No. 0
660963 1425 / 3 Tool Chest - EMPTY 35.500
118
SHEETMETAL / TOOL ASSORTMENTS
Tool Chests / Assortments
1410ARTISAN‘S TOOL CHEST
› Four-drawer sheetmetal tool chest. › Lockable. › Strong structure, full extension ball bearing slides. › Rubber anti-slip mats in each drawer. › Drawer latch incorporated into each drawer. › Can be stacked on 1510 tool trolley and other 1410 tool chests. › Retractable spring-loaded handles. › Phosphated and powder coated to prevent corrosion. › Load capacity per drawer 35kg. › L=574 x W=417 x H=384mm.
Code No. 0
660817 1410 23.000
1425 / 5TOOL CHEST / ASSORTMENT
bd
Code No. Tool Cabinet 1425/41/1B Foam Insert 1425/41/D19 Foam Insert 1425/27/PL Foam Insert 1425/27/SD Foam Insert 1425/27/HM Foam Insert 0
660969 1425 / 5 Comprehensive - With Tools
1425 / 5 1B 6-24 Spanners (18)60CP-250 Shifting Spanner
C19 8-32 Sockets (24)50/20.8 Spark Plug SKT1987 Sliding T-BarIN19 5-19 Sockets (10)TX19 E10-24 Sockets (8)1990/75mm Extension1990/125mm Extension1990/250mm ExtensionITX19 T20-T50 Sockets (7)No.20 4-13 Sockets (11)2093Z/94 Ratchet + Coupler2090/4 Extension2098 Driving Handle1993-U10T Rev. Ratchet1997/375mm Swivel Handle1995 Universal Joint
8000/A21 Circlip Pliers8000/J21 Circlip Pliers8000/A2 Circlip Pliers8000/J2 Circlip Pliers137/250 Vice Grip145/250 Universal Pliers8132/200 JC Telephone Pliers8250/200 JC Combination Pliers8316-200 JC Side Cutters42/88M Allen Key Set43TX/09 TORX® Allen Key Set
2150 4-150 6.5 6.5-200 82153 5.52160 PH1 PH2 PH32161 PH2No.400 8 x 10 Flare Nut SpannerNo.400 11 x 13 Flare Nut SpannerNo.400 12 x 14 Flare Nut SpannerNo.400 17 x 19 Flare Nut SpannerNo.400 22 x 24 Flare Nut Spanner26R Tubular Box Spanners - 8x9 10x11 12x13 14x1526RS/2 Stepped Tommy Bar
403 Hacksaw9000.00 Digital Vernier702/21M Feeler - Gauge Set9100 Utility Knife9534.05 Tape Measure248ST/40 Recoil Free Hammer8601/500g Hammer106 Chisel & Punch Set (6-Piece)95/200 Flat Chisel
59.500
› Six-compartment sheetmetal tool chest. › Lockable. › Five easy-slide drawers, incorporating full extension ball bearing slide mechanisms. › Drawer latch incorporated into each drawer. › Strong structure, smooth operating hinges. › Can be stacked on 1525 tool trolley. › Retractable spring-loaded handles. › Load capacity per drawer 35kg. › Phosphated and powder coated to prevent corrosion. › High-density foam inserts. › L=687 x W=400 x H=491mm.
Code No. 0
660965 1425 / 5 Tool Chest - EMPTY 35.500
119
1410
1510
1410
Code No. 1B Spanners Allen Keys Screwdrivers Trolley / Inserts / Tray C19 Sockets Accessories 0
661310 1510 *Classic - With Tools
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
42-88M 2 2,5 3 4 5 6 8 10
IN19 5 6 8 10 12 14
21503-15044-1505.56.5821535.52160PH1PH22161PH2
1510 Tool Trolley1281/82-1B62 Insert1280/81-D19/IN19 Insert1280/81-D19 Acc/Skt Insert1282-SD-PH-STB Insert1282-SD-MEC-EL Insert1280/81-PL/137/36 Insert1581 Filler
C19 8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 18-11/16 19-3/4 21-13/16 22 24-15/16 26-1. 27-1.1/16 29-1.1/8 30-1.3/16 32-1.1/4 7/16AF 9/16AF 7/8AF
36/1 Oil Filter Strap Wrench62/250 Adjustable Wrench143/250 Universal Pliers50/20.8 Spark Plug Socket137/250 Grip Pliers1987 Sliding T-Bar1990-75 Extension1990-125 Extension1990-250 Extension1993U-10T Rev. Ratchet1995 Universal Joint8000-A2 Circlip Pliers8000-J2 Circlip Pliers8250-200 JC Combination Pliers8132-200 JC Telephone Pliers8316-200 JC Side Cutters
60.000
120
SHEETMETAL / TOOL ASSORTMENTS
1510TOOL TROLLEY / ASSORTMENT
d
› Ideal for the professional workshop. › Rigid sheetmetal structure. › Five standard and one deep easy-slide drawers incorporating extra strong ball bearing slider mechanisms. › Central drawer locking mechanism. › Two swivel castors (one with safety brake) for maximum mobility and safety. › Handle for easy manoeuvrability. › Load capacity of 300kg. › Load capacity per drawer 35kg. › Blue and grey powder coated. › Drawer latch incorporated into each drawer. › L=651 x W=585 x H=877mm.
Code No. 0
662792 1510 Trolley - EMPTY 48.000
Tool Trolleys / Assortments
1410 + 1510CONCEPT
*WHILE STOCKS LAST
1425
15251525
Code No. Tool Trolley 1425/41/1B Foam Insert 1425/41/D19 Foam Insert 1425/27/PL Foam Insert 1425/27/SD Foam Insert 1425/27/HM Foam Insert 0
661325 1525 Comprehesive - With Tools
1525 1B 6-24 Spanners (18)60CP-250 Shifting Spanner
C19 8-32 Sockets (24)No.50/20.8 Spark Plug SKT1987 Sliding T-BarIN19 5-19 Sockets (10)TX19 E10-24 Sockets (8)1990/75mm Extension1990/125mm Extension1990/250mm ExtensionITX19 T20-T50 Sockets (7)No.20 4-13 Sockets (11)2093Z/94 Rev. Ratchet2098 Driving Handle1993-U10T Rev. Ratchet1997/375mm1995 Universal Joint
8000/A21 Circlip Pliers8000/J21 Circlip Pliers8000/A2 Circlip Pliers8000/J2 Circlip Pliers137/250 Vice Grip145/250 Universal Pliers8132/200JC Telephone Pliers8250/200JC Combination Pliers8316-200 JC Side Cutters42/88M Allen Key Set43TX/09 TORX® Allen Key Set
2150 4-150 6.5 6.5-200 82153 5.52160 PH1 PH2 PH32161 PH2400 8 x 10 Flare Nut Spanner400 11 x 13 Flare Nut Spanner400 12 x 14 Flare Nut Spanner400 17 x 19 Flare Nut Spanner400 22 x 24 Flare Nut Spanner26R Tubular Box Spanners - 8x9 10x11 12x13 14x1526RS/2 Stepped Tommy Bar
403 Hacksaw9000.00 Digital VernierNo.702/21M Feeler-Gauge Set9100.00 Utility Knife9534.05 Tape Measure248ST/40 Recoil Free- Hammer8601/500g Ball Pein-Hammer106 Chisel & Punch- Set (6-Piece)95/200 Flat Chisel
84.400
Code No. 0
662794 1525 Tool Trolley - EMPTY 55.000
121
1525TOOL TROLLEY / ASSORTMENT
d
› Ideal for the professional workshop. › Rigid sheetmetal structure. › Five standard and two deep easy-slide drawers incorporating extra strong ball bearing slider mechanisms. › Central drawer locking mechanism. › Two swivel castors (one with safety brake) for maximum mobility and safety. › Handle for easy manoeuvrability. › Load capacity of 300kg. › Load capacity per drawer 35kg. › Blue and grey powder coated. › Drawer latch incorporated into each drawer. › L=758 x W=602 x H=914mm.
1425 + 1525CONCEPT
Modular Assortments › All assortments are packed in a high-density foam insert that will � t into an appropriate compartment of the 1425 / 3, 1425 / 5 Tool Chest and 1525 Comprehensive Kit.
Code No. 1B Spanners Allen Keys Screwdrivers Trolley / Inserts / Tray C19 Sockets Accessories 0
661306 1581 Classic - With Tools
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
42-88M 2 2,5 3 4 5 6 8 10
IN19 5 6 8 10 12 14
21503-15044-1505.56.5821535.52160PH1PH22161PH2
1581 Tool Trolley1281/82-1B/62 Insert1280/81-D19/IN19 Insert1280/81-D19 Acc/Skt Insert1282-SD-PH-STB Insert1282-SD-MEC-EL Insert1280/81-PL/137/36 Insert1581 Filler Insert
C19 8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 18-11/16 19-3/4 21-13/16 22 24-15/16 26-1. 27-1.1/16 29-1.1/8 30-1.3/16 32-1.1/4 7/16AF 9/16AF 7/8AF
36/1 Oil Filter Strap Wrench62/250 Adjustable Wrench143/250 Universal Pliers50/20.8 Spark Plug Socket137/250 Grip Pliers1987 Sliding T-Bar1990-75 Extension1990-125 Extension1990-250 Extension1993U-10T Rev. Ratchet1995 Universal Joint8000-A2 Circlip Pliers8000-J2 Circlip Pliers8250-200 JC Combination Pliers8132-200 JC Telephone Pliers8316-200 JC Side Cutters
68.000
1581TOOL TROLLEY / ASSORTMENT
d
› Ideal for the professional workshop. › Rigid sheetmetal structure with pegboard back. › Six standard and one deep easy-slide drawers incorporating extra strong ball bearing slider mechanisms. › Working platform with three compartments for small parts. Raised edges. › Central drawer locking mechanism. › Two swivel castors (one with safety brake) for maximum mobility and safety. › Handle for easy manoeuvrability. › Load capacity of 300kg. › Load capacity per drawer 35kg. › Blue and grey powder coated. › Drawer latch incorporated into each drawer. › L=635 x W=495 x H=932mm.
Code No. 0
662801 1581 Trolley - EMPTY 56.000
122
SHEETMETAL / TOOL ASSORTMENTS
Code No. 0
663023 1425/41/D19 7.820Contents C19 8-32 Sockets (24) 2098 Driving Handle 50/20.8 Spark Plug SKT
1987 Sliding T-Bar 1993-U10T Rev. Ratchet IN19 5-19 Sockets (10)1990/75mm Extension 1997/375mm Swivel Handle TX19 E10-24 Sockets (8)1990/125mm Extension 2090/4 Extension ITX19 T20-50 Sockets (7)1990/250mm Extension 2093Z-94 Ratchet + Coupler No.20 4-13 Sockets (11)1995 Universal Joint 1425/41/D19 Foam Insert
Code No. 0
663024 1425/41/1B 3.210Contents 1B 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24
1425/41/1B Foam Insert 60CP-250 Shifting Spanner
1425 / 41 / D19 1425 / 41 / 1B
Code No.
562860 1425 / 41 / D19562865 1425 / 41 / 1B562870 1425 / 27 / PL562875 1425 / 27 / SD562880 1425 / 27 / HM562885 1425 / 27 / SP
1425 / 3 / 5SPARES
ARTISAN‘S TOOLKITS 204
123
2150 4-150 (Electrician’s) 2160 PH1 (Phillips) 8132/200 Telephone Pliers2150 6.5-200 (Electrician’s) 2160 PH2(Phillips) 8250/200 Combination Pliers2150 6.5 (Mechanic’s) 2160 PH3 (Phillips) 8316-200 JC Side Cutters2150 8 (Mechanic’s) 42/88M Allen Key Set 137/250 Vice Grip145/250 Universal Pliers 1425/27/SP Foam Insert 43TX/09 TORX® Allen Key Set
Code No. 0
663037 1425/27/SP 3.170Contents 8000/A21 Circlip Pliers 137/250 Vice Grip 8250/200JC Combination Pliers
8000/J21 Circlip Pliers 145/250 Universal Pliers 8316-200 JC Side Cutters8000/A2 Circlip Pliers 1425/27/PL Foam Insert 42/88M Allen Key Set8000/J2 Circlip Pliers 8132/200JC Telephone Pliers 43TX/09 TORX® Allen Key Set
Code No. 0
663025 1425/27/PL 3.250Contents
403 Hacksaw 9000.00 Digital Vernier 248ST/40 Recoil Free Hammer106 Chisel & Punch Set 8601/500g Ball Pein Hammer No.702/21M Feeler Gauge Set9534.05 Tape Measure 9100.00 Utility Knife 95/200 Flat Chisel 1425/27/HM Foam Insert
Code No. 0
663036 1425/27/HM 4.070Contents 2150 4-150 6.5 6.5-200 8 No.400 8 x 10 Flare Nut Spanner
2153 5.5 No.400 11 x 13 Flare Nut Spanner2160 PH1 PH2 PH3 No.400 12 x 14 Flare Nut Spanner2161 PH2 No.400 17 x 19 Flare Nut Spanner26RS-2 Stepped Tommy Bar No.400 22 x 24 Flare Nut Spanner1425/27/SD Foam Insert 26R - 8x9 10x11 12x13 14x15
Code No. 0
663035 1425/27/SD 2.150Contents
› Foam inserts are not covered by the GEDORE guarantee and may be subject to degradation as well as wear and tear. Replacement foam inserts can therefore be purchased separately.
1425 / 27 / SP 1425 / 27 / PL
1425 / 27 / HM 1425 / 27 / SD
Modular Assortments › Toolbox, Tool Cabinet, Tool Trolley and Modular Assortments.
Code No. / Insert Sockets Accessories 0
662208 REF A-C19/22/ACCInsert1280/81-22-ACC
C19 7/16AF 9/16AF 7/8AF
50/20.8 Spark Plug Socket1990-75 Extension1990-125 Extension1990-250 Extension1997/375 Power Bar1987 Sliding T-Bar1995 Universal Joint
2.370
Code No. / Insert Sockets Accessories 0
662216 REF B-C19 Insert1280/81-D19
C19 8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 18-11/16 19-3/4 21-13/16 22 24-15/16 26-1. 27-1.1/16 29-1.1/8 30-1.3/16 32-1.1/4
1993U-10T Rev. Ratchet 2.710
REF A-C19/22/ACC
REF B-C19
Code No. / Insert Sockets Accessories 0
663086 REF RF-C19/Z94 C19 8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 18-11/16 19-3/4 21-13/16 22 24-15/16 26-1. 27-1.1/16 29-1.1/8 30-1.3/16 32-1.1/4
1993 Z-94 Ratchet + Coupler
2.330
REF RF-C19/Z94
Code No. / Insert/Tray 1B Spanners Accessories 0
662224 REF C-1BInsert1280/81-1BMetal Tray1280/81
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
137/250 Grip Pliers145/250 Universal Pliers42/88M Allen Key Set
4.100
REF C-1B
Code No. / Insert/Tray 1B Spanners Accessories 0
663087 REF SF-1B/145Insert1280/81-1BMetal Tray1282
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
137/250 Grip Pliers145/250 Universal Pliers42/88M Allen Key Set
3.960
124
SHEETMETAL / TOOL ASSORTMENTS
REF SF-1B/145
Code No. / Insert Sockets Allen Key Sockets 0
662232 REF D-C19/IN19Insert1280/81-D19/IN19
C19 8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 18-11/16 19-3/4 21-13/16 22 24-15/16 26-1. 27-1.1/16 29-1.1/8 30-1.3/16 32-1.1/4
IN19 5 6 8 10 12 14
2.670
REF D-C19/IN19
Code No. / Insert Sockets Accessories 0
662275 REF H-D19/22/ACCInsert1280/81-22-ACC
D19 9 18 20 50/20.8 Spark Plug Socket1987 Sliding T-Bar1990-75 Extension1990-125 Extension1990-250 Extension1995 Universal Joint1997/375 Power Bar
2.360
Code No. / Insert Sockets Accessories 0
662283 REF I-D19Insert1280/81-D19
D19 8 10 11 12 13 14 15 16 17 19 21 22 24 26 27 28 29 30 32
1993U-10T Rev. Ratchet 2.360
REF H-D19/22/ACC
REF I-D19
Code No. / Insert Sockets Allen Key Sockets 0
662291 REF J-D19/IN19Insert1280/81-D19/IN19
D19 8 10 11 12 13 14 15 16 17 18 19 21 22 24 26 27 29 30 32
IN19 5 6 8 10 12 14 2.720
REF J-D19/IN19
125
Code No. / Insert 1B Spanners Accessories 0
662240 REF E-1B/62Insert1281/82-1B/62Metal Tray1280/81
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
62/250 Adjustable Wrench143/250 Universal Pliers42/88M Allen Key Set
4.120
Code No. / Insert Sockets Accessories 0
662259 REF F-D19/ACC/SKT Insert1280/81-D19 ACC/SKT
D19 7/16AF 9/16AF 7/8AF
50/20.8 Spark Plug SKT1987 Sliding T-Bar1990-75 Extension1990-125 Extension1990-250 Extension1995 Universal Joint1993U-10T Rev. Ratchet
2.180
REF E-1B/62
REF F-D19/ACC/SKT
Code No. / Insert Sockets Accessories 0
662267 REF G-C32/6Insert1280/81-D32/6
C32 1.3/8AF 36-1.7/16 38-1.1/2 41-1.5/8 46-1.13/16 50-2.
3287/447 Sliding T-Bar3290-200 Extension3290-400 Extension3293U-1/440 Rev. Ratchet
8.700
REF G-C32/6
Code No. / Insert Pliers/Circlip Pliers Accessories 0
662356 REF L-PL/137/36 Insert1280/81-PL137/36
Pliers8132/200 JC Telephone Pliers8250/200 JC Universal Pliers8316/200 JC Side CuttersCirclip Pliers8000-A28000-J2
36/1 Strap Wrench137/250 Grip Pliers
2.390
REF L-PL/137/36
Code No. / Insert Pliers 0
662941663082
REF M-PL/81/82/83 Ass.REF MF-PL/81/82/83 Ass.Insert1282-Pliers
8132/200 JC Telephone Pliers8250/200 JC Universal Pliers8316/200 JC Side Cutters
2.7002.010
REF M/MF-PL/81/82/83
Code No. / Insert Sockets Accessories 0
662321 REF K-D32/6Insert1280/81-D32/6
D32 1.3/8AF 36 38 41 46 50
3287/447 Sliding T-Bar3290-200 Extension3290-400 Extension3293U-1/440 Rev. Ratchet
8.710
REF K-D32/6 REF-10SD
Code Description 2150 2153 2160 2161 0
662348 10SD 4 5.5 6.5 83-150 4-150
5.5 PH1 PH2 PH2 1.830
REF N-10
Code Insert 2150 2153 2160 2161 0
662968 1282-2161 ELS+PH 1282-2150 MEC
4 5.5 6.5 83-150 4-150
5.5 PH1 PH2 PH2 2.100
126
SHEETMETAL / TOOL ASSORTMENTS
REF WF/VF
Code Inserts 2150 2160 2161 2153 0
663092663091
REF WF-2153REF VF-2161
4 5.5 6.5 8 5.53-150 4-150 PH1 PH2 PH2
0.5800.450
127
REF OF
Code No. / Insert Accessories 0
663020 REF P-4 Ext – T-bar AssInsert1282 EXT
1990-75 Extension1990-125 Extension1990-250 Extension1987 Sliding T-Bar
1.100
REF P-4 EXT T-BAR
REF 0-6SD
REF Q-4
REF QF-4
Code No. 2150 2160 0
663018 REFO-6SDInsert1282-6SD 3C
45.56.58
PH1PH2
1.780
Code No. 2150 2160 0
663083 REF OF-6SD InsertREF OA-2150-6SD Foam Insert
45.56.58
PH1PH2
0.730
Code No. / Insert Accessories 0
663084 REF PF-4 Ext – T-bar AssInsertFoam
1990-75 Extension1990-125 Extension1990-250 Extension1987 Sliding T-Bar
1.080
REF PF-4 EXT T-BAR
Code No. / Insert Accessories 0
663022 REF Q-4 ACC – Power Bar Ass.Insert1282-4 ACC.
1990-75 Extension1990-250 Extension1995 Universal Joint1997-375 Swivel Handle
1.300
Code No. / Insert Accessories 0
663085 REF QF-4 ACC – Power Bar Ass.InsertRef Q 1997
1990-75 Extension1990-250 Extension1995 Universal Joint1997-375 Swivel Handle
1.300
HAMMERS, CHISELS, PUNCHES
SETS
RECOIL FREE HAMMERS
130
CHISELS
130
PUNCH SETS
131
BALL PEIN HAMMERS
130
CENTRE PUNCHES
130
PUNCH NUMBER/LETTER SET
131
HAND GUARD
130
CHISEL & PUNCH SET
131
SLEDGE HAMMERS
133
› Splinter-proof, shatter-proof and wear- resistant polymide heads. › Powder coated with silver hammer-e� ect enamel. › Robust and durable steel tube handle.
› Drop forged. › Striking faces induction hardened
and precision ground › Blue epoxy powder coated. › In accordance with SANS 387. › Hardwood handles.
› Made from Chrome Molybdenum Vanadium air hardened 45CrMoV7 steel, in accordance with DIN 6453. › Carefully hardened and tempered
along the full length. › Striking head induction tempered to
prevent shattering. › Working edge polished and clear varnished, free of burrs.
› Made from Chrome Molybdenum Vanadium air hardened 45CrMoV7 steel, in accordance with DIN 6451. › Carefully hardened and tempered along the
full length. › Striking head induction tempered to prevent shattering. › Working edge polished and clear varnished, free of burrs.
NEW
130
HAMMERS / STRIKING TOOLS
Hammers / Striking Tools
248 STRECOIL-FREE HAMMERS
95FLAT COLD CHISELS
96CROSS-CUT CHISELS
8601BALL PEIN HAMMERS
Code No. y 0
8828950 248 ST 30mm 295 0.6008829170 248 ST 40mm 305 0.8008829250 248 ST 50mm 315 1.0058829330 248 ST 60mm 340 1.8008830260 E 248 / 30 Replacement Head (1 Piece) 0.0158830420 E 248 / 40 Replacement Head (1 Piece) 0.0318830500 E 248 / 50 Replacement Head (1 Piece) 0.0508830690 E 248 / 60 Replacement Head (1 Piece) 0.090
Code No. y 0
676381 8601 / 100 280 0.160676403 8601 / 200 310 0.320676411 8601 / 300 325 0.420676438 8601 / 500 370 0.610676446 8601 / 700 375 0.840676519 8601 / 900 400 1.140676527 8601 / 1100 410 1.240
Code No. Tip y 0
8698640 95 - 125 15mm 125 0.1258698720 95 - 150 18mm 150 0.2258698800 95 - 175 21mm 175 0.2708698990 95 - 200 24mm 200 0.2708699100 95 - 250 28mm 250 0.4808699370 95 - 300 30mm 300 0.7008700640 95 HS-300 with guard 30mm 300 0.860
Code No. y 0
8702180 96 - 125 125 0.1408702260 96 - 150 150 0.2208702340 96 - 175 175 0.2708702420 96 - 200 200 0.3808702500 96 - 250 250 0.5358702770 96 - HS-250 with guard 250 0.695
› Made from PVC. › Ergonomic design. › Rectangular shape ensures no rolling away. › Optimum hold – avoids hand fatigue and injuries. › For use with 95, 2095 and 2096 chisels.
› Made from Chrome Molybdenum Vanadium air hardened 45CrMoV7 steel, in accordance with DIN 7250. › Hardened and tempered along the full length. › Striking head induction tempered to prevent
shattering. › Working edge polished and clear varnished.
108UNI HAND GUARD
100CENTRE PUNCHES
Code No. 0
8658500 108 UNI 0.160
Code No. Tip y 0
8721050 100 - 10 4mm 120 0.0608721130 100 - 12 5mm 120 0.0958721210 100 - 15 5mm 150 0.1208721480 100 - 16 8mm 150 0.240
› 6mm print height. 9 numbers. › To label � nished parts such as signs, tools etc. › In blue plastic box. › Made from hardened steel, with hardened handle and
tempered striking head to prevent shattering.
› 6mm print height. 27 letters. › To label � nished parts such as signs, tools etc. › In blue plastic box. › Made from hardened steel, with hardened handle and
tempered striking head to prevent shattering.
131
2201LETTER SET
99DRIFT PUNCHES
2200NUMBER SET
› Made from Chrome Molybdenum Vanadium air hardened 45CrMoV7 steel, in accordance with DIN 6458. › Hardened and tempered along the full length. › Striking head induction tempered to prevent
shattering. › Working edge polished and clear varnished.
Code No. y 0
8708700 99 10-1 120 0.0608708970 99 10-2 120 0.0608709190 99 10-3 120 0.0608711170 99 12-4 120 0.0908711330 99 12-5 120 0.0908711410 99 12-6 120 0.0908711680 99 12-7 120 0.1008711760 99 12-8 120 0.105
Code No. 0
8605140 2200 - 6 0.300
Code No. 0
8605220 2201 - 6 1.30
› Made from Chrome Molybdenum Vanadium air hardened 45CrMoV7 steel. › Hardened and tempered along the full length. › Striking head induction tempered to prevent
shattering. › Working edge polished and clear varnished. › Comes in a PVC stand.
Code No. Contents 0
8725200 10697 - 125 97 - 150 98 - 125 99 - 12-3 100 - 10 119 - 4
0.550
› Made from Chrome Molybdenum Vanadium air hardened 45CrMoV7 steel. › Hardened and tempered along the full length. › Striking head induction tempered to prevent
shattering. › Working edge polished and clear varnished. › Comes in a PVC stand.
113DRIFT PUNCH SET6 pieces
116PIN PUNCH SET6 pieces
106CHISEL & PUNCH SET6 pieces
› Made from Chrome Molybdenum Vanadium air hardened 45CrMoV7 steel. › Hardened and tempered along the full length. › Striking head induction tempered to prevent
shattering. › Working edge polished and clear varnished. › Comes in a PVC stand.
Code No. Contents 0
8753680 11399 - 10-1 99 - 10-2 99 - 10-3 99 - 12-4 99 - 12-5 100 - 10
0.450
Code No. Contents 0
8757670 116 A119 - 3 119 - 4 119 - 5 119 - 6 119 - 7 119 -8
0.510
SLEDGE HAMMER
Developed in 1975 to withstand the rigorous hard rock mining conditions with hard hitting power that delivers more than 36 000 strikes smoothly and efficiently.
Forged headSuperior grain structure.Striking faces hardened to 50-58HRC.
Positive locking plateHead will not seperate from the handle.
Thickened bossFurther protects the hammer fromoverstrikes.
Non-slip gripSecure grip in both wet and dry conditions.
High tensile steel rodsHigh strength rubber-to-metal bonding makes the handle extremely strong.
Ergonomic shapeHandle is shaped to provide a comfortable and safe grip.
Impact absorbing handleHeavy duty rubber cushions impact, thereby reducing fatigue and injury.
Locked-in lanyard holeTotally safe attachment.
Sledge / Club Hammers
620CCLUB HAMMERS
› Handle contains high tensile steel rods moulded in abrasive-resistant rubber ensuring outstanding durability. › Locking plate design ensures head will not seperate from the handle. › The abrasive-resistant rubber is injected all the way into the eye of the hammer head. › Superior quality rubber handle provides excellent grip in wet and dry conditions allowing for versatility and safety. › Hammer head hardened to 50-58HRC and conforms to ANSI, BS876 & ISO15601 Speci� cations.
Applications: Mining, Construction, Steelwork, Fencing, Electrical Engineering, Chiseling and Chasing, Surveying
Code No. y 0
676530 620C Club Hammer 250 1.10676531 620C Club Hammer 250 1.80
132
HAMMERS / STRIKING TOOLS
640SSLEDGE HAMMERS
› Handle contains high tensile steel rods moulded in abrasive-resistant rubber ensuring outstanding durability. › Superior quality rubber handle provides excellent grip in wet and dry conditions
allowing for versatility and safety. › Head 99.98% copper reduces damage to workpieces and reduces chance of sparking
in hazardous areas.
Applications: Mining, Petrochemical, Engineering, Toolmaking
622CCOPPER SLEDGE HAMMERS
› Handle core contains high tensile steel rods moulded in abrasive-resistant rubber ensuring outstanding durability. › Locking plate design ensures head will not seperate from the handle. › The abrasive-resistant rubber is injected all the way into the eye of the hammer head. › Superior quality rubber handle provides excellent grip in wet and dry conditions
allowing for versatility and safety. › Hammer head hardened to 50-58HRC and conforms to ANSI, BS876 & ISO15601 Speci� cations.
Applications: Mining, Building & Construction, Demolition, Heavy Industry, Military, Emergency Serrvices.
650CCLUB HAMMERS
› Fine grain high alloy steel/carbon steel. › Drop forged. › Heat treated and induction hardened. › Highly polished head. › Fiber glass handle. › Comfortable shock absorbant vinyl grip. › 50-58HRC.
Code No. y 0
6765392 650C Club Hammer 260 1.1006765390 650C Club Hammer 275 1.800
Close up
133
NEW
Code No. y 0
676532 640S Steel Sledge Hammer 535 3.60676533 640S Steel Sledge Hammer 710 6.30
Code No. y 0
676534 622C Copper Sledge Hammer 250 1.80676536 622C Copper Sledge Hammer 535 3.60676538 622C Copper Sledge Hammer 710 6.30
VDE INSULATED
SAFETY TOOLS
SPANNERS
136
TORQUE WRENCH
137
CABLE SHEARS
140
NUT DRIVERS
136
SCREWDRIVERS
137
VOLTAGE TESTER
140
NUT DRIVER SET
136
PLIERS / SIDE CUTTERS
138
TOOLSETS
140
VDE 2 E 19
VDE 2 E 13
VDE 894 12
VDE 894 22
VDE 2 EVDE SINGLE ENDED RING SPANNERSdeep offset
› Gedore Vanadium steel 31CrV3. › VDE insulation up to 1000 V, according to EN 60900/IEC 60900, two-ply Check-Tool insulation.
VDE 894VDE SINGLE OPEN ENDED SPANNERS
› Gedore Vanadium steel 31CrV3. › VDE insulation up to 1000 V, according to EN 60900/IEC 60900, two-ply Check-Tool insulation. › Jaw set at 15 °.
iO ö 1000 V VDE 2133
NUT DRIVERSwith 3C handle
› 3-component handles Power-Grip3 with hanging hole. › Ergonomic handle design. › Head depth 25mm, blade length 125mm. › VDE insulation up to 1000 V, according to EN 60900/IEC 60900.
Code No. Contents 0
1747260 VDE 2133 / 102133 5,0 6,0 7,0 8,0 9,0 10,0 11,0 12,0 13,0 14,0
1.30
VDE 2133NUT DRIVER SET10 pieces
› Only tools bearing these test symbols are classed as insulated tools.
› VDE insulation as per standard EN60900, IEC/CEI900, VDE0680.
› Safe working in high-voltage areas.
› Up to 1000V alternating current.
› Up to 1500V direct current.
iO ö 1000 V
*WHILE STOCKS LAST / INDENT ONLY *WHILE STOCKS LAST / INDENT ONLY
136
INSULATED SAFETY TOOLS
Code No. y 3 0
6036000 VDE 2 E10mm * 170 10 0.0976036190 VDE 2 E11mm * 180 11 0.0936036350 VDE 2 E13mm * 190 13 0.1306036430 VDE 2 E14mm * 210 14 0.1516036780 VDE 2 E17mm * 220 17 0.1996036860 VDE 2 E19mm * 240 19 0.2446037320 VDE 2 E32mm * 330 32 0.683
Code No. y 3 0
6572120 VDE 894 10mm * 105 10 0.0346572200 VDE 894 11mm * 115 11 0.0446572470 VDE 894 13mm * 135 13 0.0676572550 VDE 894 14mm * 145 14 0.0816572980 VDE 894 17mm * 160 17 0.1176573010 VDE 894 19mm * 175 19 0.1616574920 VDE 894 32mm * 280 32 0.558
Code No. N 1 Head Ø 0
1747045 VDE 2133 3 225 3 9 0.1091747053 VDE 2133 4 225 4 10 0.1111747061 VDE 2133 5 225 5 11 0.1121747088 VDE 2133 6 225 6 12 0.1141747096 VDE 2133 7 235 7 14 0.1521747118 VDE 2133 8 235 8 15 0.1541747126 VDE 2133 9 235 9 16 0.1541747134 VDE 2133 10 245 10 17 0.1611747142 VDE 2133 11 245 11 19 0.1931747150 VDE 2133 12 245 12 20 0.1961747169 VDE 2133 13 245 13 21 0.1991747177 VDE 2133 14 245 14 22 0.1981747185 VDE 2133 17 245 17 26 0.222
ö 1000 V VDE 4507TORQUE WRENCH 1/2"5-50 Nm / 4-37 lbf·ft
› Controlled screw tightening in the most common range of 5 - 50Nm / 4 - 37 lbf·ft. › Automatic short-path actuation with tactile impulse and audible signal. › Dual scale with a scale graduation of 5Nm and 5lbf·ft. › Fine toothed ratchet with square drive as per DIN 3120 - A 12.5, ISO 1174. › VDE insulation up to 1000V, according to EN 60900/IEC 60900, two-ply
Check-Tool insulation.
VDE 2160 PHPHILLIPS SCREWDRIVERSfor cross-head screws PH
VDE 2170ELECTRICIAN‘S SCREWDRIVERSfor slotted head screws
Code No. + ; N 0
1612115 VDE 2160 PH1 M2 - M3 1 180 0.0821612123 VDE 2160 PH2 M3,5 - M5 2 210 0.1191612131 VDE 2160 PH3 M5,5 - M7 3 270 0.188
iO ö 1000 V
› Individually tested, VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, fully insulated blade › Tip to DIN ISO 2380-1 form B › 3-component handles Power-Grip3 with hanging hole › Ergonomic handle design enables precise and fatigue-free working › Positive-� t joint of handle and blade for optimum transmission of force › Type of drive marked at end of the handle › Blade from GEDORE molybdenum-vanadium-Plus tempered steel
iO ö 1000 V
› Individually tested, VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, fully insulated blade › Blade tip to DIN ISO 8764-1 PH › 3-component handles Power-Grip3 with hanging hole › Ergonomic handle design enables precise and fatigue-free working › Positive-� t joint of handle and blade for optimum transmission of force › Type of drive marked at end of the handle › Blade from GEDORE molybdenum-vanadium-Plus tempered steel
Code No. ? K N 0
1612220 VDE 2170 2,5 2.5 160 0.0381612247 VDE 2170 3,5 3.5 185 0.0551612255 VDE 2170 4 4.0 185 0.0581612271 VDE 2170 5,5 5.5 225 0.0951612298 VDE 2170 6,5 6.5 260 0.134
VDE 2160-2170SCREWDRIVER SET6 pieces
Code No. Contents 0
1616048 VDE 2170-2160 PH 06 ? VDE 2170 3.5 4 5.5 6.5 0.660; VDE 2160 PH1 PH2
*WHILE STOCKS LAST
137
Code No. a „ a y 0
6681920 VDE 4507-4 * 1/2 12.5 370 1.251
P iO ö 1000 V
VDE 8316 H VDE POWER SIDE CUTTERSwith VDE insulating sleeves
› For hard wires. › Oil hardened, chrome plated. › Cutting edges inductively rehardened, approximately 64HRC. › Handles with VDE dipped insulation as per DIN EN 60900.
P iO ö 1000 V
VDE 8314 H VDE SIDE CUTTERSwith VDE insulating sleeves
› With slender head - ideal for con�ned spaces. › For medium-hard wire, 1.6 mm. › Cutting edges inductively rehardened, approximately 64HRC. › Oil hardened, chrome plated. › GEDORE special hardened and tempered steel, chrome plated. › Handles with VDE dipped insulation as per DIN EN 60900.
iO ö 1000 V
VDE 8098 H VDE STRIPPING PLIERSwith VDE insulating sleeves
› Opening stop, spring and brass adjusting screw. › For cables 0.8 - 6.0 mm2. › GEDORE special hardened and tempered steel, chrome-plated. › Handles with VDE insulation as per DIN EN 60900.
Code No. Ø y 0
1552155 VDE 8314-140 H 1.6 140 0.1771552163 VDE 8314-160 H 1.6 160 0.231
138
INSULATED SAFETY TOOLS
R iO ö 1000 V
VDE 8250 H VDE HEAVY DUTY COMBINATION PLIERSwith VDE insulating sleeves
› For consistent use under tough working conditions. › To cut all wire types including piano wire. › Good lever action for easy cutting. › In heat treated steel as per DIN EN 10083. › Oil hardened, chrome plated. › Cutting edges inductively rehardened, approximately 64HRC. › Handles with VDE dipped insulation as per DIN EN 60900.
Code No. y 0
1550942 VDE 8250-160 H 160 0.2281550950 VDE 8250-180 H 180 0.2881550969 VDE 8250-200 H 200 0.369
Code No. y 0
1551000 VDE 8316 - 200 H 200 0.350
Code No. y 0
1552074 VDE 8098-160 H 160 0.204
T iO ö 1000 V
VDE 8132 H VDE TELEPHONE PLIERSwith VDE insulating sleeves, straight pattern
› Long, �at jaws and straight gripping surfaces. › Face hardness approximately 62HRC. › GEDORE special hardened and tempered steel, chrome plated. › Handles with VDE insulation as per DIN EN 60900.
Code No. y 0
1552112 VDE 8132 - 160 H 160 0.1501552120 VDE 8132 - 200 H 200 0.210
R iO ö 1000 V
VDE 8120 H VDE FLAT NOSE PLIERSwith VDE insulating sleeves
› Long, �at jaws and serrated gripping surfaces. › GEDORE special hardened and tempered steel, chrome plated. › Handles with VDE insulation as per DIN EN 60900.
S iO ö 1000 V
VDE 8122 H VDE ROUND NOSE PLIERSwith VDE insulating sleeves
› Long, round jaws and serrated gripping surfaces. › GEDORE special hardened and tempered steel, chrome plated. › Handles with VDE insulation as per DIN EN 60900.
VDE 8132 AB H VDE BENT NOSE TELEPHONE PLIERSwith VDE insulating sleeves, angled pattern
› Long, �at jaws and angled gripping surfaces. › Face hardness approximately 62HRC. › GEDORE special hardened and tempered steel, chrome plated. › Handles with VDE insulation as per DIN EN 60900.
Code No. y 0
1552104 VDE 8122 -160 H 160 0.180
iO ö 1000 V VDE 8099 H
VDE STRIPPING PLIERSwith VDE insulating sleeves
› Self adjusting for wires 0,5-5,0mm2. › GEDORE special hardened and tempered steel, chrome plated. › Handles with VDE insulation as per DIN EN 60900.
Code No. y 0
1552090 VDE 8120 - 160 H 160 0.210
Code No. y 0
1552139 VDE 8132AB-160 H 160 0.1501552147 VDE 8132AB-200 H 200 0.210
T iO ö 1000 V
139
Code No. y 0
1552082 VDE 8099-160 H 160 0.170
Code No. Contents 0
1550594 VDE S 8003 H VDE 8132 - 160 HVDE 8250 - 180 HVDE 8314 - 160 H
0.747
T P iO ö 1000 V
VDE S 8003 H VDE PLIERS SET WITH VDE INSULATING SLEEVES3 pieces
› Packed in environmentally-friendly cardboard box › Handles with VDE insulating sleeves up to 1000 V, acc. to EN 60900/IEC 60900
140
INSULATED SAFETY TOOLS
iO ö 1000 V
VDE 4522 CABLE KNIFE
› Strong, straight blade made from hardened and tempered steel. › Tough, resilient plastic handle. › With VDE insulation as per DIN EN 60900.
ö 1000 V V 180 CABLE SHEARS
› Cuts cable up to 27mm, solid material up to 200 mm2. › Individually tested, insulation up to 1000V.
V 4614 PLUS VOLTAGE TESTER 1000 Vtwo-pole with LED display
Code No. y 0
6430330 180-23 620 2.12Code No. y 0
6690400 VDE 4522 180 0.104
Code No. 0
2241137 V 4614 0.270
› AC and DC voltages from 12-690V. › Accoustic continuity testing up to 500KOhm. › Single pole phase testing > 100VAC. › With VDE insulation as per DIN EN 60900. › Twin-pole with LED display. › 2x batteries type AAA included. › Integrated LED torch (white). › Automatic on/o� function. › Protection classi�cation IP65, dust-proof, hose-proof. › Safety outlet and CEE one-hand operation. › Displays polarity in case of direct current (DC).
o d ? 5
iO ö 1000 V
VDE 1001 VDE TOOLSET
› With practical foam insert in sturdy PVC case. › Dimensions: 395 x 295 x 106mm. › Cranked allen socket screwdriver no. 42 is for locking
the adjusting screw of extension no. VDE 1990 no. 42 is not VDE insulated.
VDE 1101-003 VDE TOOLSETin i-BOXX® 72
› In Gedore i-BOXX® 72, with transparent cover for easy view of tools. › Dimensions: 367 x 316 x 72mm.
Code No. Contents 0
1828045 1101-003 VDE 8132-200H VDE 2170 4 5,5 VDE 8250-180H VDE 2160 PH1 PH2 VDE 8314-160H VDE 4615 3
2.00
T P
? ;
iO ö 1000 V
ö 1000 V
Code No. Allen Keys Sockets Accessories 0
6602560 1001 VDE Toolset
42 2,5 VDE 19 10 12 13 14 17 19 22 24
VDE 1993 UVDE 1990-5 -10VDE 1989 TVDE 2170 5,5
3.40
ELECTRICIAN‘S TOOLSET
1100-1094VDE TOOL ASSORTMENT HYBRID
n c
iO ö 1000 V
141
o d 5
iO ö 1000 V
› Double stitched and bound. › Very durable water repellent inner lining. › Heavy duty zip. › Reinforced inners.
› Perfect range of tools for all vehicle types. › Comes in Gedore L-BOXX´®
VDE Nut Drivers Accessories 0
2133 4 6 8 10 13
Electrician’s ToolcaseVDE 8098-160H Stripping PliersVDE 8250-200H Combination PliersVDE 8314-160H Side CuttersVDE 8132-200H Telephone Pliers137-175 Grip Pliers62-250 P10 Shifting Spanner
145-250 Waterpump Pliers9930.000 Torch9534.05 Tape MeasureVDE 4522 Cable KnifeDigital Multimeter8601-300 Ball Pein Hammer
6.10
Code No. 1B Spanners 42-88M Allen Keys VDE Screwdrivers668122 Electrician’s
Tool Set8 10 13 17 19 2 2,5 3 4 5 6
8 10VDE 2160PH1PH2PH3VDE 217045.56.5
Code No. Contents 02979063 1100-1094 VDE 30 6 8 9 10 11 12 13 14
15 16 17 18 19 20 22VDE INX 30 8 10 12VDE 3090-3 3093-6VDE 3093-UVDE 2170 2,5 3,5 4 5,5VDE 2160 PH1 2 3VDE 2163 TX T20 T25 T30VDE 8094
VDE 146 10VDE 8250-200HVDE 8314-180HVDE 8132 AB-200HVDE 8120-160HVDE 4522V914 1 2 3
8.04
TORQUE TOOLS
TORCOFIX
146
TORQUE SLIPPERS
156
CALIBRATION ANALYSERS
163
DREMASTER
148
TORQUE BREAKERS
158
FITTINGS / RATCHET HEADS
165
DREMOMETER
150
TORQUE SCREWDRIVERS
162
MULTIPLIERS
167
1
1
1
1
1
1
1
1
3
3
2
3
OVERVIEW OF GEDORE
TORQUE TOOLS
Page Series/Type Precision +/- Drive Ratchet ScaleOperation length independent
Release types
0,4 – 3.000Nm Mechanical Torque Wrenches Mechanical torque wrench
155 Dremometer Mini 3% b
152 Dremometer 3% b g
149 Dremaster DMK 3% d e
149 Dremometer DMSE 3% } ~
146 Torcofix K 3% b e
147 Torcofix SE 3% } ~
147 Torcofix FS 3% } ~
156 TSN Slipper 4% b d 3
158 TBN Breaker 4%, 6% j }157 TSP Slipper 6% b
157 TSC Slipper 6% b
161 Typ 83 4% b d160 Typ 88 4% e
0,04 – 13,6Nm Torque screwdriver
162 TLS Pro 6% i
162 Typ 756 S 6% i
2 – 1.000Nm Electronic torque wrench
160 Torcotronic III 1% d
Torque testers
163 Dremotest E 1% b f
TORCOFIX 146 DREMASTER 148
144
TORQUE TOOLS
Different Torque Tool Mechanisms Range Nm
When the preset torque value is reached the operator will hear a click, feel an impulse and there will be approximately 3° of tool movement. Resetting takes place when the hand pressure is released. Work can then immediately continue.These tools are generally length dependent (exception DREMOMETER models AM - F), thus the position of the hand on the tool alters the torque produced. Continued application of force after the 3° of movement will cause the torque applied to increase above the required preset limit.
When the preset torque value is reached, these tools break at a speci�c point along the tool’s length - usually at a pivot point near the tool’s head. In most cases the movement is approximately 20°. The tool is automatically reset by allowing the handle to return to its in line position. These tools are length dependent, thus the position of the hand on the tool alters the torque produced. Continued application of force after 20° of tool movement will increase the torque applied above the preset limit but with the greater angle of tool movement this is less likely.
When the preset torque value is reached, a mechanism in the tool causes the application of torque to cease and the tool slips free for a short time until resetting occurs. Even if the application of force is repeated, the preset torque value will not be exceeded, therefore making it impossible to overtighten a fastener. These tools are not length dependent.
Click ToolsOvertightening Possible
Breaking ToolsOvertightening Unlikely
Slipping ToolsOvertightening Impossible
Torque
50 10 15 20 40 60 80 100 150 200 300 400 500 750 1000 1500 2000
Torque
Torque
approx. 3° m
ovement
approx. 20° movement
Preset Torque Value
Preset Torque Value
Preset Torque Value
Applied Force
Applied Force
Applied Force
1
2
3
Overtightening Possible
Overtightening Unlikely
Overtightening Impossible
2,5 – 12Nm
6 – 3.000Nm
20 – 850Nm
20 – 400Nm
1 – 750Nm
5 – 50Nm
2 – 200Nm
3 – 125Nm
5 – 200Nm
1 – 10Nm
0.8 – 2000Nm
100 – 1500Nm
5 – 125Nm
0,05 – 25Nm
0,05 – 9Nm
1 – 10Nm
70 – 350Nm
1 – 10Nm
0,9 – 3150Nm
Page Series/Type Precision +/- Drive Ratchet ScaleOperation length independent
Release types
0,4 – 3.000Nm Mechanical Torque Wrenches Mechanical torque wrench
155 Dremometer Mini 3% b
152 Dremometer 3% b g
149 Dremaster DMK 3% d e
149 Dremometer DMSE 3% } ~
146 Torcofix K 3% b e
147 Torcofix SE 3% } ~
147 Torcofix FS 3% } ~
156 TSN Slipper 4% b d 3
158 TBN Breaker 4%, 6% j }157 TSP Slipper 6% b
157 TSC Slipper 6% b
161 Typ 83 4% b d160 Typ 88 4% e
0,04 – 13,6Nm Torque screwdriver
162 TLS Pro 6% i
162 Typ 756 S 6% i
2 – 1.000Nm Electronic torque wrench
160 Torcotronic III 1% d
Torque testers
163 Dremotest E 1% b f
DREMOMETER 150
145
4550TORQUE WRENCH TORCOFIX K40-750Nm / 30-550lbf·ft
Use: › For use in almost all industrial manufacturing areas. › For controlled nut and bolt tightening.
Features: › Adjustable torque wrench with a square drive and integrated ratchet head function. › For controlled bi-directional tightening. › Interchangeable mushroom head square drive with ball-locking mechanism as per DIN 3120. › In accordance with DIN EN ISO 6789, traceable to national norms.
TORCOFIX K / SE / FS
TORCOFIX Robust torque wrench with square drive and integrated
ratchet-head function for controlled bi-directional tightening.
ScaleEasily readable double scale (Nm/lbf.ft), well protected behind a window with a magnifying glass effect. The torque setting is readable on the scale or, more particularly, on the scale in combination with the scale ring.
Micrometer scaleOptimised shape, stable scale frame with red-shaded micrometer scale ring. Model-dependent intervals of 0.025, 0.1, 0.25, 0.5 or 1Nm allow very accurate settings.
Ligthweight and reliableLocking button enables reliable locking of the torque setting.
Handgrip with a user aidBlack plastic handgrip, new ergonomically enhanced shape, with an indentation in the middle of the handgrip. User aid and reference points for calibration.Automatic actuation
The TORCOFIX actuates with a clear tactile impulse and audible signal and is immediately ready for operation again.
Robust steel tubeWith high corrosion protection, copper clad and chrome plated, silk-matt.
Chrome-plated ratchet headAll 1/4“-1/2“ square drives of the TORCOFIX K series have a black plastic cap – also referredto as a mushroom head. This mushroom head prevents an unintentional pulling out of the whole square drive when changing the nut socket.
Classi� ed to DIN EN ISO 6789:2003 Type II Class A, with a factory certi� cate allowing for operations to be traced back. Calibrated to a permitted +/- 3% deviation and better. The speci� cations of the standard (+/- 4%) are exceeded.
Maximum +/- 3% tolerance:Guaranteed TORCOFIX accuracy of +/- 3% of relevant scale value reading for each 5,000 tightening cycles. Includes test certificate as per DIN EN ISO 6789. Serial number on the wrench and on the certificate allows clear product identification, traceable to national norms.
› Actuation accuracy: +/- 3% tolerance of the scale set to torque. › Lever breaking mechanism with a castor guarantee tactile impulse and audible actuation signals. › Double scale Nm and lbf.ft behind window with magnifying e� ect. › Black plastic handgrip with slip-resistant ribbed surface. › Sturdy, varnished tubular steel construction, with zinc plated ratchet head and top grade plastic parts. › Additional micrometer scale with a Nm graduation of 0.1, 0.25, 0.5 or 1Nm. › Supplied with a calibration certi� cate. › Unique serial number for traceability.
13
2
180
FUNCTIONIn order to change the turning direction of the TORCOFIX K: › Press on the protruding square drive with your thumb and take out the mushroom head, turn the wrench over and re-insert the square drive.
146
TORQUE TOOLS
Code No. a „
a Nm lbf·ft y 0
7601610 4550-20 1/2 12.5 40-200 30-150 485 1.107674330 4550-40 3/4 20.0 80-400 60-300 665 1.867674760 4550-55 3/4 20.0 110-550 80-405 960 3.561521365 4550-75 3/4 20.0 150-750 110-550 1240 4.50
3549 UK - 3550 UK TORQUE WRENCH TORCOFLEX UK5-200Nm
4549 TORQUE WRENCH TORCOFIX K1-50Nm / 0.75-37lbf·ft
4150-4151 TORQUE WRENCH TORCOFIX FS2-200Nm
4101 TORQUE WRENCH TORCOFIX SE5-50Nm / 3.5-37lbf·ft
Use: › For use in almost all industrial manufacturing areas. › For controlled nut and bolt tightening.
Features: › Adjustable torque wrench with a square drive and integrated ratchet head function. › For controlled bi-directional tightening. › Interchangeable mushroom head square drive with ball-locking mechanism as per DIN 3120. › In accordance with DIN EN ISO 6789, traceable to national norms. › Actuation accuracy: +/- 3% tolerance of the scale set to torque. › Lever breaking mechanism with a castor guarantee tactile impulse and audible actuation signals. › Double scale Nm and lbf.ft behind window with magnifying e�ect. › Black plastic handgrip with slip-resistant ribbed surface. › Full-metal construction from high strength aluminium alloy. › Additional micrometer scale with a Nm graduation of 0.1, 0.25, 0.5 or 1Nm. › Supplied with a calibration certi�cate. › Unique serial number for traceability.
9x12 9x12
14x18Use: › For use in almost all industrial manufacturing areas. › For controlled nut and bolt tightening.
Features: › Adjustable torque wrench with a 9x12 or 14x18 rectangular cavity. › For controlled bi-directional tightening. › With pin-locking mechanism for replaceable 9x12 or 14x18 spanner end �ttings. › In accordance with DIN EN ISO 6789, traceable to national norms. › Actuation accuracy: +/- 3% tolerance of the scale set to torque. › Lever breaking mechanism with a castor guarantee tactile impulse and audible actuation signals. › Double scale Nm and lbf.ft behind window with magnifying e�ect. › Full-metal construction from high strength aluminium alloy. › Supplied with a calibration certi�cate. › Unique serial number for traceability.
Use: › For use in almost all industrial manufacturing areas. › For controlled nut and bolt tightening.
Features: › Adjustable torque wrench with a 9x12 rectangular cavity. › For controlled bi-directional tightening. › With pin-locking mechanism for replaceable 9x12 spanner end �ttings. › In accordance with DIN EN ISO 6789, traceable to national norms. › Actuation accuracy: +/- 3% tolerance of the scale set to torque. › Lever breaking mechanism with a castor guarantee tactile impulse and audible actuation signals. › Double scale Nm and lbf.ft behind window with magnifying e�ect. › Full-metal construction from high strength aluminium alloy. › Supplied with a calibration certi�cate. › Unique serial number for traceability.
TORCOFLEX UK
17mm 19mm 21mm
FREE with 3550-UK-LS 3
Use: › Ideal for �tment centres and automotive workshops. › For controlled nut and bolt tightening.
Features: › Torque wrench with integrated lever-ratchet-head. › Working accuracy: +/- 3% tolerance of scale set torque. › For controlled directional tightening › Classi�ed to DIN EN ISO 6789:2003 Type II Class A, with a factory certi�cate.
NEW
147
Code No. a „
a Nm lbf·in y 0
2201429 4549-00 1/4 6.3 1-5 0,75-3,7 225 0.3231545132 4549-02 1/4 6.3 2-25 1,5-18 285 0.4501545140 4549-05 3/8 10.0 10-50 7,5-37 335 0.540
Code No. : „ Nm lbf·in y 0
1646206 4101-05 9x12 5-50 3,5-37 325 0.640
Code No. : „ Nm y 0
7601960 4150-25 9x12 2-25 180 0.2107602180 4150-50 9x12 5-50 240 0.2707602850 4150-85 9x12 15-85 320 0.3407603580 4151-20 14x18 20-200 400 0.750
Code No. a „ a Nm y 0
2958015 3549-02 UK 1/4 6.3 5-25 285.5 0.4102958023 3549-05 UK 3/8 10.0 10-50 348.5 0.8202958031 3550-10 UK 1/2 12.5 20-100 408.8 1.3803014398 3550-UK-LS 3 INCLUDES
3 FREE SOCKETS 17, 19, 21mm1/2 12.5 40-200 499 1.990
DREMASTER ®Robust torque wrench with square drive and integrated ratchet-head function for controlled bi-directional tightening and interchangeable mushroom head with push-button release.
Handgrip with a user aidBlack plastic handgrip, new ergonomically enhanced shape, with an indentation in the middle of the handgrip. User aid and reference points for calibration.
Ligthweight and reliableLocking button enables reliable locking of the torque setting. Torque adjustable reference by means of opened lock symbol. Provision for rapid setting from the separate hexagon allen key � xture.
NoniusModel-dependent intervals of 1 or 0.5Nm allow for very accurate settings.
Dual scale with main and alternative unit (Nm/Ibf·ft). Main unit Nm with vernier. At all times only one unit in the viewing area = avoids any reading errors. Change-over switch next to the scale for straightforward unit selection.
Chrome plated ratchet headAll 1/2” square drives of the DREMASTER DMK-series have a black plastic cap – also referred to as a mushroom head. This mushroom head prevents an unintentional pulling out of the whole square drive when changing the socket.
Classi� ed to DIN EN ISO 6789:2003Type II Class A, with a factory certi� cate allowing for operations to be traced back. Calibrated to a permitted +/- 3% deviation and better. Exceeding the speci� cations standard of +/- 4%.
Robust steel tubeWith high corrosion protection, chrome plated, satin powder coated.
Additional protection of the serial numberConcealed setting drill hole = secured adjusting/setting system serial number on the wrench and on the certi� cate for unambiguous product identi� cation, traceable via in-house DAkkS laboratory to national standards.
Automatic actuationThe DREMASTER® DMK actuates with a clear tactile impulse and audible signal and is immediately ready for operation again.
2995832 01/16
GEDORE Werkzeugfabrik GmbH & Co. KGRemscheider Straße 14942899 Remscheid · GERMANY
Vertrieb DEUTSCHLANDFon +49 2191 596-900 Fax +49 2191 596-999 [email protected]
Sales INTERNATIONALFon +49 2191 596-910 Fax +49 2191 596-911www.gedore.com
1
2
3
180°
Technical informationAnti-loss attachment
Function
All the benefits at a single glance
In order to change the turning direction of the DREMASTER® DMK:Press on the push-button with your thumb and take out the mushroom head. Turn the wrench over and re-insert the square drive.
› Additional protection of the serial number. › Concealed setting drill hole. › Engaging adjusting button with locking reference (lock symbol). › Rapid adjustment provision using a separate hexagon allen key. › Mushroom head with release button and soft component.
› Plastic grip with soft component. › Dual scale (main unit with vernier). › At all times only one unit in the viewing area (Nm or lbf·ft). › Change-over switch for selecting the unit. › Controlled safety via in-house DAkkS test laboratory.
148
TORQUE TOOLS
DREMASTER®
DMK TORQUE WRENCH DREMASTER®20-850Nm / 15-630lbf·ft
Use: › For use in all areas of industrial manufacturing. › For controlled nut and bolt tightening.
Features: › Adjustable torque wrench with a square drive and integrated ratchet head function. › For controlled bi-directional tightening. › Interchangeable mushroom head square drive with ball-locking mechanism as per DIN 3120. › In accordance with DIN EN ISO 6789, traceable to national norms. › Lever breaking mechanism with a castor guarantee tactile impulse and audible actuation signals.
› Actuation accuracy: +/- 3% tolerance of the scale set to torque. › Sturdy, satin-chrome plated tubular steel construction, with chrome plated
ratchet head and top grade plastic parts. › Ergonomically shaped, two-component plastic grip with calibration aid. › Double scale Nm and lbf.ft behind window with magnifying e�ect. › Additional micrometer scale with a Nm graduation of 0.1, 0.25, 0.5 or 1Nm. › Supplied with a calibration certi�cate. › Unique serial number for traceability.
Code No. a „
a Nm lbf·ft 9 Scale ring y 0
2641232 DMK 100 1/2 12.5 20-100 15-75 5 N·m 0,5 N·m 423.5 1.102641240 DMK 200 1/2 12.5 40-200 30-150 10 N·m 1 N·m 514.5 1.302641259 DMK 300 1/2 12.5 60-300 45-220 10 N·m 1 N·m 606.4 1.502641267 DMK 400 3/4 20.0 80-400 60-300 10 N·m 1 N·m 714.8 2.402641275 DMK 550 3/4 20.0 110-550 80-405 10 N·m 1 N·m 953.2 3.802641283 DMK 750 3/4 20.0 150-750 110-550 10 N·m 1 N·m 1,228.2 4.902641291 DMK 850 3/4 20.0 250-850 185-630 10 N·m 1 N·m 1,375.2 5.20
DMSE TORQUE WRENCH DREMASTER® 20-400Nm / 15-300lbf·ft
Code No. : Nm lbf·ft 9 Scale ring y 0
2641445 DMSE 100 9x12 20-100 15-75 5 N·m 0,5 N·m 398.5 1.002641453 DMSE 150 9x12 30-150 22-110 10 N·m 1 N·m 489.5 1.162641461 DMSE 200 14x18 40-200 30-150 10 N·m 1 N·m 499.5 1.252641488 DMSE 300 14x18 60-300 45-220 10 N·m 1 N·m 590.4 1.402641496 DMSE 400 14x18 80-400 60-300 10 N·m 1 N·m 677.2 2.00
Use: › For use in all areas of industrial manufacturing. › For controlled nut and bolt tightening.
Features: › Adjustable torque wrench with a spigot end. › For controlled bi-directional tightening. › Interchangeable mushroom head square drive with ball-locking mechanism as per DIN 3120. › In accordance with DIN EN ISO 6789, traceable to national norms. › Lever breaking mechanism with a castor guarantee tactile impulse and audible actuation signals.
› Actuation accuracy: +/- 3% tolerance of the scale set to torque. › Sturdy, satin-chrome plated tubular steel construction, with chrome plated ratchet
head and top grade plastic parts. › Ergonomically shaped, two-component plastic grip with calibration aid. › Double scale Nm and lbf.ft behind window with magnifying e�ect. › Additional micrometer scale with a Nm graduation of 0.1, 0.25, 0.5 or 1Nm. › Supplied with a calibration certi�cate. › Unique serial number for traceability.
9x12
149
1
2
3
t L b - f 6-2000Nm
Z 8-1000Nm
SE } ~ 8-400Nm
s b - g 6-3000Nm
DREMOMETERPERMANENT PRECISIONTorque wrench made of high-strength aluminium alloy
Drive in accordance with applicationDREMOMETERS are available for a large variety of applications in controlled screw tightening. The single square drive for controlled clockwise tightening or the double square drive (L) for controlled bi-directional tightening. Special utilisation areas for DREMOMETER with spigot end (Z) and rectangular cavity (SE) particularly for hard-to-access locations and where space is tight. Almost all DREMOMETER models have separate ratchet heads, and there are good reasons for that: It is possible to work with or without the ratchet head function as desired.
RobustThe full-metal construction of the DREMOMETER makes it particularly unsusceptible to grime and rough handling on construction sites, in workshops and in industry.
ModelClassi� ed to DIN EN ISO 6789:2003 Type II Class A, with a factory certi� cate allowing for operations to be traced back. Calibrated to a permitted +/- 3% deviation and better. The speci� cations of the standard (+/- 4%) are exceeded.
Automatic resetting The DREMOMETER gives the operator an audible signal and tactile impulse and is back in operation in an instant.
The quality lever chain produced in Gedore‘s own drop forge reduces the strain on the mechanics to a minimum. The proportioning of the individual levers, which are optimally attuned to each other, gives the DREMOMETER its unique precision and its long tool life.
1 Position of the lever chain without impact of force (in starting position).
2 Position of the lever chain with impact of force before the set torque is achieved. The force is transferred from the primary lever to the intermediary and � nal lever until the � nal lever slips past the so-called release lever through the sliding back of the angle-lever body.
3 Position of the lever chain when the force impacts after the torque setting is achieved. Immediate position after the clear tactile impulse and audible signal click. On relief, the lever chain moves back into the starting position (1).
Working principle
150
TORQUE TOOLS
A+S
Maximum precisionExtended tool life span even if used intensely.
› Serial number on the wrench and on the certi� cate for product identi� cation and traceability.
Scale Clear dual scale Nm and lbf·in/lbf·ft on every DREMOMETER (apart from models E / EL / EK / EKL / F).
Regardless of where you apply the force, at the centre of the handgrip or another part of the DREMOMETER, with both hands or using an extension tube, your torque setting will always be attained, without shifts in value. Due to its unique single-axis location of the centre of rotation and the output square drive, the DREMOMETER is a tool that can be operated free from errors. In contrast to conventional torque wrenches, this single lever enables tightening without shifts in the measured value and without interference caused by activation outside of the handgrip.
Setting of the torque value to Nm or alternatively to lbf·in / lbf·ft by the clumsy hexagon key in the handgrip. The smooth-running mechanism enables the setting to be made quickly without signi� cant force needing to be applied.
All DREMOMETERS are also available with locking and safety device (A+S).
However, value shifts are possible when activating the DREMOMETER with special wrenches or when using wrenches with di� erent depth gauges.
DREMOMETEROperable without inaccuracies
Features
Lightweight and pleasant The aluminium housing and the ergonomically designed handgrip enable simple and safe operation over wide tightening ranges.
1
2
3
151
152
TORQUE TOOLS
8554 TORQUE WRENCH DREMOMETER6-30Nm / 50-270lbf·in
DREMOMETER
Code Type No. a „
a Contents 9 Nm lbf·in y 0
7775440 s 8554-01 1/4 6.3 ! in plastic box 1Nm / 10lbf·in 6-30 50-270 265 0.580
8560 TORQUE WRENCH DREMOMETER8-40Nm / 70-350lbf·in
Code Type No. a „
a Contents 9 Nm lbf·in y 0
7682000 s 8560-01 3/8 10 ! in plastic box 5Nm / 50lbf·in 8-40 70-350 338 1.00
8561 TORQUE WRENCH DREMOMETER20-120Nm / 15-90lbf·ft
Code Type No. a „
a Contents 9 Nm lbf·ft y 0
7683320 s 8561-01 1/2 12.5 ! in plastic box 5Nm / 5lbf·ft 20-120 15-90 462 1.50
Use: › For use in almost all industrial manufacturing areas. › For controlled nut and bolt tightening.
Features: › Adjustable torque wrench with a 1/2”single square drive for controlled clockwise tightening. › 1/2” square drive with ball-locking mechanism as per DIN 3120. › In accordance with DIN EN ISO 6789, traceable to national norms. › Automatic short path actuation with tactile impulse and audible signal. › Actuation accuracy: +/- 3% tolerance of the scale set to torque. › Full-metal construction from high strength aluminium alloy. › Double scale Nm and lbf.ft with scale graduation of 1Nm and 10lbf.in. › Supplied with a calibration certi�cate. › Unique serial number for traceability.
Use: › For use in almost all industrial manufacturing areas. › For controlled nut and bolt tightening.
Features: › Adjustable torque wrench with a 1/4” single square drive for controlled clockwise tightening. › 1/4” square drive with ball-locking mechanism as per DIN 3120. › In accordance with DIN EN ISO 6789, traceable to national norms. › Automatic short path actuation with tactile impulse and audible signal. › Actuation accuracy: +/- 3% tolerance of the scale set to torque. › Full-metal construction from high strength aluminium alloy. › Double scale Nm and lbf.ft with scale graduation of 1Nm and 10lbf.in. › Supplied with a calibration certi�cate. › Unique serial number for traceability.
Use: › For use in almost all industrial manufacturing areas. › For controlled nut and bolt tightening.
Features: › Adjustable torque wrench with a 3/8”single square drive for controlled clockwise tightening. › 3/8” square drive with ball-locking mechanism as per DIN 3120. › In accordance with DIN EN ISO 6789, traceable to national norms. › Automatic short path actuation with tactile impulse and audible signal. › Actuation accuracy: +/- 3% tolerance of the scale set to torque. › Full-metal construction from high strength aluminium alloy. › Double scale Nm and lbf.ft with scale graduation of 1Nm and 10lbf.in. › Supplied with a calibration certi�cate. › Unique serial number for traceability.
153
8562 TORQUE WRENCH DREMOMETER50-300Nm / 35-220lbf·ft
Code Type No. a „
a Contents 9 Nm lbf·ft y 0
7685450 s 8562-01 1/2 12.5 ! in plastic box 5Nm / 5lbf·ft 50-300 35-220 617 2.0
Use: › For use in almost all industrial manufacturing areas. › For controlled nut and bolt tightening.
Features: › Adjustable torque wrench with a 1/2” single square drive for controlled clockwise tightening. › 1/2” square drive with ball-locking mechanism as per DIN 3120. › In accordance with DIN EN ISO 6789, traceable to national norms. › Automatic short path actuation with tactile impulse and audible signal. › Actuation accuracy: +/- 3% tolerance of the scale set to torque. › Full-metal construction from high strength aluminium alloy. › Double scale Nm and lbf.ft with scale graduation of 1Nm and 10lbf.in. › Supplied with a calibration certi�cate. › Unique serial number for traceability.
8573 TORQUE WRENCH DREMOMETER40-200Nm / 30-150lbf·ftUse: › For use in almost all industrial manufacturing areas. › For controlled nut and bolt tightening.
Features: › Adjustable torque wrench with a 1/2” single square drive for controlled clockwise tightening. › 1/2” square drive with ball-locking mechanism as per DIN 3120. › In accordance with DIN EN ISO 6789, traceable to national norms. › Automatic short path actuation with tactile impulse and audible signal. › Actuation accuracy: +/- 3% tolerance of the scale set to torque. › Full-metal construction from high strength aluminium alloy. › Double scale Nm and lbf.ft with scale graduation of 1Nm and 10lbf.in. › Supplied with a calibration certi�cate. › Unique serial number for traceability.
Code Type No. a „
a Contents 9 Nm lbf·ft y 0
7685530 s 8573-00 1/2 12.5 ! in plastic box 5Nm / 5lbf·ft 40-200 30-150 551 1.40
Code Type No. a „
a Contents 9 Nm lbf·ft y 0
7670180 s 8563-01 (DR) with extension tube 3/4 20 ! in plastic box 5Nm / 5lbf·ft 140-760 105-560 1400 5.007691500 s 8563-10 (D) 3/4 20 ! in plastic box 140-760 105-560 812 2.90
Use: › For use in almost all industrial manufacturing areas. › For controlled nut and bolt tightening.
Features: › Adjustable torque wrench with a 3/4” single square drive for controlled clockwise tightening. › 3/4” square drive with ball-locking mechanism as per DIN 3120. › In accordance with DIN EN ISO 6789, traceable to national norms. › Automatic short path actuation with tactile impulse and audible signal. › Actuation accuracy: +/- 3% tolerance of the scale set to torque. › Full-metal construction from high strength aluminium alloy. › Double scale Nm and lbf.ft with scale graduation of 1Nm and 10lbf.in. › Supplied with a calibration certi�cate. › Unique serial number for traceability.
8563 D & DR TORQUE WRENCH DREMOMETER140-760Nm / 105-560lbf·ft
154
TORQUE TOOLS
8564 TORQUE WRENCH DREMOMETER750-2000Nm
8570 TORQUE WRENCH DREMOMETER80-360Nm / 60-260lbf·ft
Code Type No. a „
a Contents 9 Nm lbf·ft y 0
7688470 s 8570-10 3/4 20 ! in plastic box 5Nm / 5lbf·ft 80-360 60-260 718 2.40
Use: › For use in almost all industrial manufacturing areas. › For controlled nut and bolt tightening.
Features: › Adjustable torque wrench with a 3/4” single square drive for controlled clockwise tightening. › 3/4” square drive with ball-locking mechanism as per DIN 3120. › In accordance with DIN EN ISO 6789, traceable to national norms. › Automatic short path actuation with tactile impulse and audible signal. › Actuation accuracy: +/- 3% tolerance of the scale set to torque. › Full-metal construction from high strength aluminium alloy. › Double scale Nm and lbf.ft with scale graduation of 1Nm and 10lbf.in. › Supplied with a calibration certi�cate. › Unique serial number for traceability.
8571 TORQUE WRENCH DREMOMETER520-1000Nm / 380-730lbf·ft
Use: › For use in almost all industrial manufacturing areas. › For controlled nut and bolt tightening.
Features: › Adjustable torque wrench with a 3/4” single square drive for controlled clockwise tightening. › 3/4” square drive with ball-locking mechanism as per DIN 3120. › In accordance with DIN EN ISO 6789, traceable to national norms. › Automatic short path actuation with tactile impulse and audible signal. › Actuation accuracy: +/- 3% tolerance of the scale set to torque. › Full-metal construction from high strength aluminium alloy. › Double scale Nm and lbf.ft with scale graduation of 1Nm and 10lbf.in. › Supplied with a calibration certi�cate. › Unique serial number for traceability.
Code Type No. a „
a Contents 9 Nm lbf·ft y 0
7694010 s 8571-01 3/4 20 ! in plastic box with ALU extension tube
10Nm / 10lbf·ft 520-1000 380-730 800-1400 5.10
Code Type No. a „
a Contents 9 Nm y 0
7695250 s 8564-01 1 25 ! with 2 extension tubes 50Nm 750-2000 932-2353 11.60
Use: › For use in almost all industrial manufacturing areas. › For controlled nut and bolt tightening.
Features: › Adjustable torque wrench with a 1” single square drive for controlled clockwise tightening. › 1” square drive with ball-locking mechanism as per DIN 3120. › In accordance with DIN EN ISO 6789, traceable to national norms. › Automatic short path actuation with tactile impulse and audible signal. › Actuation accuracy: +/- 3% tolerance of the scale set to torque. › Full-metal construction from high strength aluminium alloy. › Single scale Nm with scale graduation of 50Nm. › Extension tube with maximum lever length of 1998mm. › Supplied with a calibration certi�cate. › Unique serial number for traceability.
155
8572 TORQUE WRENCH DREMOMETER1500-3000Nm
Code Type No. a „
a Contents 9 Nm y 0
7717160 s 8572-01 1.1/2 40 ! with 2 extension tubes 50Nm 1500-3000 1423-2343 13.20
Use: › For use in almost all industrial manufacturing areas. › For controlled nut and bolt tightening.
Features: › Adjustable torque wrench with a 1.1/2” single square drive for controlled clockwise tightening. › 1.1/2” square drive with ball-locking mechanism as per DIN 3120. › In accordance with DIN EN ISO 6789, traceable to national norms. › Automatic short path actuation with tactile impulse and audible signal. › Actuation accuracy: +/- 3% tolerance of the scale set to torque. › Full-metal construction from high strength aluminium alloy. › Double scale with scale graduation of 50Nm. › Extension tube with maximum lever length of 2343mm. › Supplied with a calibration certi�cate. › Unique serial number for traceability.
753 TORQUE WRENCH DREMOMETER MINI2-12Nm
Code Type No. a „
a Contents 9 Nm lbf·in y 0
1957694 Mini 753-11 1/4 6.3 ! in plastic box 0,5Nm / lbf·in + 0,05Nm 2-12 18-106 211 0.320
Use: › For use in almost all industrial manufacturing areas. › For controlled nut and bolt tightening.
Features: › Adjustable torque wrench with a 1/4” single square drive for controlled clockwise tightening. › 1/4” square drive with ball-locking mechanism as per DIN 3120. › In accordance with DIN EN ISO 6789, traceable to national norms. › Automatic short path actuation with tactile impulse and audible signal. › Actuation accuracy: +/- 3% tolerance of the scale set to torque. › Window with a magnifying-glass e�ect. › Double scale with a scale graduation of 0.5Nm and 5 lbf·in. › Additional micrometer scale for setting interim values with Nm, graduations of 0.05Nm › Supplied with a calibration certi�cate. › Unique serial number for traceability.
8200 TORQUE ANGLE INDICATOR
Code No. a „
Q „
, A° 0
1195980 8200-01 1/2 1/2 80 0-360 0.330
Use: › Additional angle regulated tightening for controlled torque and angle activation.
Features: › F or additional precise angle tightening (0 - 360°) › 1/2“ square drive with ball-locking device. › With sliding magnetic and gripping arm. › For use with a suitable torque wrench. › The maximum output of the torque wrench must not be exceeded.
156
TORQUE TOOLS
TSN SLIPPERPre-set ratchet head torque wrench with automatic actuation and slip function. Over-tightening is not possible.
Integrated ratchet function Particularly dependable ratchet with 36 teeth (759-00/-01) or 48 teeth (759-02/-03). Slip-through function guarantees controlled and safe screw tightening, even in hard-to-access locations.
High repeatabilityGuarantees constant tightening torques.
Output square driveMade of quality steel with ball-locking mechanism
Robust casting partMade of corrosion-resistant, rustproof material.
Rubber handgripErgonomic and pleasant to hold in your hand. Prevents slipping.
Technical information
TSN SLIPPER & TBN BREAKER
Working principle
TSN SLIPPER All TSN Slipper and TBN Breaker torque wrenches (apart from 760-00/-01) are � tted with the patented Mechanical Torque Adjustment Locking Device to modify torque tester.
When the pre-set torque value is achieved, the mechanism slips through over the ball (without the possibility of over-tightening). The torque wrench is then immediately ready for the next operation.
Use: › For use in all areas of production line assembly. › For controlled nut and bolt tightening.
Features: › Pre-set production torque wrench without scale. › Square drive with ball-locking mechanism. › In accordance with DIN EN ISO 6789, traceable to national norms. › Actuation accuracy: +/-4% tolerance of the set torque.
› Precision mechanism slides through very noticeably and audibly when the pre-set torque is achieved – over tightening is not possible. › Automatic resetting to the starting position. › Lightweight yet stable and corrosion resistant construction design. › Black, non-slip rubber handgrip. › Supplied with a calibration certi� cate. › Unique serial number for traceability.
759TORQUE WRENCH TSN SLIPPER3-125Nm / pre-set
Code No. a „
a Nm y 0
7091900 759-00 1/4 6.3 5-25 216 0.3407092040 759-01 1/4 6.3 5-25 216 0.3407092120 759-02 3/8 10.0 15-55 324 0.8007092200 759-03 1/2 12.5 40-125 460 1.360
Use: › For use in all areas of assembly work where controlled tightening with low torque values is required
(eg electronic hardware sector). › For controlled nut and bolt tightening.
Features: › Pre-set production torque wrench without scale. › Square drive with ball-locking mechanism. › Integrated ratchet function for controlled clockwise tightening. › In accordance with DIN EN ISO 6789, traceable to national norms.
› Actuation accuracy: +/-6% tolerance of the set torque. › Precision mechanism slides through very noticeably and audibly when the pre-set
torque is achieved – over tightening is not possible. › Automatic resetting to the starting position. › Lightweight yet stable and corrosion resistant construction design. › ESD (electrostatic discharge) = electrostatically protected. › Black, non-slip rubber handgrip. › Supplied with a calibration certi� cate. › Unique serial number for traceability.
Use: › For use in all areas of assembly work where controlled tightening with low torque values is required
(eg electronic hardware sector). › For controlled nut and bolt tightening.
Features: › Improved control of the fastening process by reducing the risk of both under and over tightening. › Unique slipping mechanism, which gives the operator more time to react once the target torque is
reached. › Actuation accuracy: +/- 6% tolerance of the set torque.
› Maintains production output by minimising operator fatigue through the tool’s ergonomic design. › Maximises productivity in restricted space through its compact slimline design. › EPA compliant for use in electrostatically sensitive applications. › Drive type made of stainless steel. › Supplied with a calibration certi� cate. › Unique serial number for traceability. › Accessories available.
Use: › For use in all areas of assembly work where controlled tightening with low torque values is required
(eg electronic hardware sector). › For controlled nut and bolt tightening.
Features: › Square drive with ball-locking mechanism. › Integrated ratchet function for controlled clockwise tightening. › In accordance with DIN EN ISO 6789, traceable to national norms. › Actuation accuracy: +/-6% tolerance of the set torque.
› Precision mechanism slides through very noticeably and audibly when the pre-set torque is achieved – over tightening is not possible. › Automatic resetting to the starting position. › Lightweight yet stable and corrosion resistant construction design. › ESD (electrostatic discharge) = electrostatically protected. › Black, non-slip rubber handgrip. › Supplied with a calibration certi� cate. › Unique serial number for traceability.
157
762TORQUE WRENCH TSC SLIPPER1-10Nm
761TORQUE WRENCH TSP SLIPPER1-10Nm / pre-set
Code No. a „
a Nm y 0
1196650 761-05 1/4 6.3 1-5 185 0.1901196731 761-10 1/4 6.3 2-10 185 0.190
Code No. a „
a Nm y 0
1196480 762-05 1/4 6.3 1-5 195 0.2351196510 761-10 1/4 6.3 2-10 195 0.235
TSCTORQUE WRENCH ADJUSTABLE SLIPPER10-90Nm
Code No. a „
a Nm y 0
056060 TSC-45 1/4 6.3 10-45 195 0.235056080 TSC-90 1/4 6.3 20-90 195 0.235
158
TORQUE TOOLS
TBN BREAKERPre-set torque wrench with automatic snap actuation. Torque wrench offering maximum accuracy. Guaranteed tightening values without over-tightening.
Drive16mm spigot end or 9x12mm rectangular cavity made of quality steel with pin-locking mechanism.
BreakingAll TBN breaking torque wrenches break by 20° at the pivot point when the set torque is achieved. The models 760-00/-01 can also be set to a breaking angle of 90°.
Lightweight steel tubeFirm, solid and free of corrosion.
Patented mechanismGuarantees a long product lifespan with guaranteed accuracy values.
Working principle
TBN BREAKER
Technical information
TBN BREAKERWhen the TBN breaking torque wrench is operated, the rear section of the driver unit pushes on the roller. When the pre-set torque value is achieved, the lever switches over and the front section of the drive unit breaks.
TBN Breaker 760-00/-01 values are changed using the Double Positive adjustment system.
As an option, Gedore also manufactures the TBN Breaker models 760-00/-01 with interchangeable � ttings directly positioned on the tool.
TBN Knickerj
5 - 135Nm
TBN Knicker}
0,2 - 135Nm
Rubber handgrip: Ergonomic and pleasant to hold in your hand. Prevents slipping.
9x12 16
TBN-65
TBN-135G
TBN-25G
159
Code No. Ø : EPA Nm lbf·in y 0
7090690 TBN-2G 9x12 x 0.4-2 1.8-18 133 0.125
7090770 TBN-10G 9x12 x 1-10 9-89 133 0.145
1824694 TBN-25G 9x12 5-25 44-221 265 0.405
1824716 TBN-65G 9x12 10-65 89-575 302 0.745
1824732 TBN-135G 9x12 25-135 177-1195 408 1.030
050310 TBN-200G 14x18 40-200 520 1.400
1825686 TBN-25 16 5-25 44-221 265 0.4101824708 TBN-65 16 10-65 89-575 302 0.7501824724 TBN-135 16 20-135 177-1195 408 1.030050300 TBN-200 16 40-200 520 1.400
Use: › For controlled nut and bolt tightening. › For use in all areas of production line assembly. › Extremely durable.
Features: › Pre-set production torque wrench – without scale › With 9x12mm rectangular cavity end or 16mm spigot-end. › For bi-directional tightening (the wrench only has to be turned by 180°). › Actuation accuracy: +/- 4% tolerance of the set torque. › Precision mechanism slides through very noticeably and audibly when the pre-set
torque is achieved – over tightening is not possible. › Automatic resetting to the starting position. › Lightweight yet stable and corrosion resistant construction design. › Black, non-slip rubber handgrip. › No. 760-00/-01: EPA (Electrostatic Protected Area) compliant. › The TBN range is available with a variety of end � tting styles.
ATB SEADJUSTABLE BREAKING TORQUE WRENCH1-10Nm
Code No. : ISO y 0
2839636 ATB-5G 9x12 1-5 230 0.2902839644 ATB-10G 9x12 2-10 230 0.300
Use: › Controlled bolt and nut tightening. › For use in all areas of production line assembly. › Extremely durable.
Features: › Compact design allows easy access where space is restricted. › With 9x12 mm rectangular end. › O� ers improved control of the tightening process by reducing the risk of under and over
tightening. This is achieved by Torqueleader’s unique breaking mechanism that allows the operator more time to react once the target torque is achieved. › Accuracy +/- 6% of reading. › Reduces the likelihood of warranty claims and rework by assuring process control through accurate
and repeatable torque application. › Automatic resetting to the starting position. › Fast and accurate to set using the quick and easy to read micrometer setting scale. › Black, non-slip rubber handgrip. › This tool is length dependent, with hand position altering the torque applied. › Accessories available.
TBN-65
TBN-135G
Precision mechanism slides through very noticeably and audibly when the pre-set
760BREAKING TORQUE WRENCH TBN0,4-200Nm / 44-147lbf·in / pre-set
9x12
Torque wrench Type 88
8801TORQUE WRENCH150-1500Nm
Use: › Controlled bolt and nut tightening in the range 100 - 1500Nm. › For use in all areas of industry, automotive sector and machine maintenance.
Features: › Adjustable torque wrench with scale. › 3/4"square drive with integrated ratchet function. › Push-through square drive for bi-directional tightening. › In accordance with DIN EN ISO 6789, traceable to national norms.
› Breaker mechanism (handle snaps over) is seen and felt when selected torque is reached, reducing the likelihood of over tightening. › Dual scale in Nm and lbf·ft › Actuation accuracy: +/- 4% tolerance of the value setting. › 4 models in the range 150 - 1500Nm › Robust construction. › Supplied with a calibration certi� cate and unique serial number for traceability. › Delivered in sturdy cardboard packaging
TT3KHELECTRONIC TORQUE WRENCH TORCOTRONIC III70-350Nm / 51.6-258.2lbf·ft
Use: › For everyday requirements in installation and torque control. › For use in all areas of manufacturing and development.
Features: › Microprocessor controlled, electronic torque wrench with CE symbol. › For controlled bi-directional tightening › Broad measurement range in Nm, can be switched to lbf·ft. › With 1/2” reversible ratchet. The ratchet is exchangeable, providing the option of using a 9x12mm (8455-120) or 14x18mm (8455-350) square socket.
Characteristics: › Torque and torque angle measure. › 5 di� erent measuring modes. › 5 parameters storable. › USB interface for data exchange. › 2000 storage places › High measurement accuracy: +/-1% tolerance for all read-o� values, +/-1 digit. › Di� erent depth gauges for end � ttings programmable. › Simple to operate with easy to understand icon-menu navigation and 4 functional keys. › Clearly readable, illuminated LCD display.
› Resolution torque: 0.1Nm. › Resolution torque angle: 0.1°. › PC-software easy to operate for uncomplicated programming and
documentation of data. › Data can be transfered to MS Excel®. › Keyboard lock. › Operation with standard Mignon AA or optional with rechargeable-battery (NiMH). › Visual signal: 3x LED (yellow, green, red). › Acoustic signal: buzzer.
Scope of delivery: › Electronic torque wrench TorcoTronic III HighLine. › Reversible ratchet 1/2". › USB cable. › Software on CD-R. › Supplied with a calibration certi� cate. › Delivered in a transparent plastic box with insert.
Attention: › A PC, running Windows® operating system (from Windows XP®) is required to obtain the full bene� t of
all the functions of this product.
Torcotronic lll
*WHILE STOCKS LAST
160
TORQUE TOOLS
Code No. a „
a 9 Nm y 0
3022854 8801-01 3/4 20 10Nm 150-700 915 5.5003022862 8801-02 3/4 20 10Nm 200-800 1090 6.0003022870 8801-03 3/4 20 20Nm 300-1000 1470 7.3003022889 8801-04 3/4 20 25Nm 700-1500 1470 10.00
Code No. a „
a : N·m lbf·ft 0
2648644 TT3KH-350 * 1/2 12.5 14x18 70-350 51.6-258.2 1.20
8301
8302
8301 - 8302 TORQUE WRENCH WITH SLAVE POINTER0.8-200Nm
Use: › Controlled tightening and veri�cation of tightening values. › For use in all areas of industrial manufacturing and quality control. › Working ranges of 0.8 to 200Nm are covered.
Features: › Dial-indicating torque wrench with dual scale and multi-functional slave pointer. › 1/4", 3/8", 1/2" double-square drive with ball locking device for controlled bi-directional tightening. › Models 8301-04 to 8302-20: With integrated ratchet function. › For controlled screw tightening and torque measurements. › Working accuracy: +/- 4% tolerance of the indicated torque. › Double scale in Nm and lbf·in or lbf·ft display on double tinted clearly readable face. › Integrated overload protection – mechanical stop up to maximum 25% overload of the maximum
value. › Housing made of lightweight, robust special aluminium construction – lacquered, silver-grey. › Black, non-slip rubber handgrips. › Models 8301-04 to 8301-40: EPA-conformant (Electrostatic Protected Area), for use in sensitive
electrostatic applications.
Scope of delivery: › Dial-measuring torque wrench type 83. › Test certi�cate accoring to DIN EN ISO 6789. › Delivered in a sturdy black plastic box (no. 8301-04 to 8302-20).
Torque wrench Type 83
TORQUE WRENCHES WITH SLAVE POINTERIDEAL FOR TEST, CONTROL AND MAINTENANCE WORK
Clear product identi�cation: Provided by the type plate/label.
The article number and the serial number always ensure traceabili-
ty to test and check the tool.
Practical handgrip: Handgrip shaped in
accordance with the most recent ergonomic
�ndings. Resistant to grease and oil.
Solid tube: Light-metal tube
with plastic sleeving.
Dual scale: Nm and lbf·in/lbf·ft with main
and slave pointers, protected by a strong
window made of Trogamid T.
Integrated ratchet spindle: The double square drive enables
high-speed bi-directional
tightening.
FEATURES
The working principle of the torque wrench with slave pointer type 83
161
Code No. Type a „
a 9 Nm lbf·in Height y EPA 0
7651390 8301-04 t 1/4 6.3 0,1Nm / 1lbf·in 0,8-4 7-35 61 244 x 0.5007651470 8301-12 t 1/4 6.3 0,5Nm / 2lbf·in 2,4-12 21-105 61 244 x 0.5007651550 8301-25 t 3/8 10.0 1Nm / 10lbf·in 5-25 44-240 69 244 x 0.5007651630 8301-40 t 3/8 10.0 1Nm / 10lbf·in 8-40 72-360 69 244 x 0.5007651710 8302-08 t 1/2 12.5 2Nm / 1lbf·ft 16-80 12-60 86 435 1.4007651980 8302-20 t 1/2 12.5 5Nm / 5lbf·ft 40-200 30-160 86 435 1.400
TORQUE SCREWDRIVERS 756
1/4" drive type: Made
of stainless steel, for
industry-standard bits.
Sliding T-Bar: Made of qua-
lity steel, can be adapted to
enhance user‘s, transmission
of power.
Rubber handgrip: Ergonomic,
ensuring a secure grip.
Scale: Clearly readable scale ring; enables
you to make the setting accurately, quickly
and without error.
Positive-Lock system: Locks the
set torque, reliably preventing it from
wrong setting.
756TORQUE SCREWDRIVER TYPE S0.24-9Nm
Code No. a „
a - „
- 9 Nm cN.m Height y 0
1400150 756-01 1/4 6.3 1/4 6.3 1cNm 0,24-1,2 20-120 61 183 0.1651400169 756-06 1/4 6.3 1/4 6.3 0,1Nm 1-6 120-600 61 196 0.3401400177 756-09 1/4 6.3 1/4 6.3 0,1Nm 4-9 400-900 69 196 0.340
Use: › For controlled screw tightening. › For use in electrical hardware, industrial manufacturing or in quality control.
Features: › Adjustable torque screwdriver – with scale. › With 1/4" female hexagon drive for use with 1/4" hexagon bits. › Actuation accuracy: +/- 6% tolerance of the set torque. › In accordance with DIN EN ISO 6789, traceable to national norms. › Precision radial ball clutch and cam design for controlled bi-directional tightening › Precision mechanism slips through very noticeably when the pre-set torque is achieved. › Automatic resetting to the starting position. › With set-torque-locking ‘positive-lock’ system, automatically � xes the set torque. › Non-slip rubber handgrip. › Micrometer scaling: 1cNm and 0.1Nm.
› EPA-conformant (Electrostatic Protected Area), for use in sensitive electrostatic applications
Scope of delivery: › Torque wrench type 756. › 1/4" square/hexagon drive adapter (no. 757-20). › Models 756-06/-09 with additional sliding T-bar for ease of use. › Supplied with a calibration certi� cate. › Unique serial number for traceability.
TLS PROPRESET TORQUE SCREWDRIVER0.05-13.5Nm
Code No. - „
- Nm cNm y 0
065400 TLS PRO 25H 1/4 6.3 0.05-0.25 5-25 132 0.210065500 TLS PRO 150H 1/4 6.3 0.2-1.5 20-150 132 0.210065600 TLS PRO 450H 1/4 6.3 0.5-4.5 50-450 140 0.230065700 TLS PRO 1350H 1/4 6.3 2.5-13.5 250-1350 140 0.230
› Accurate process control is ensured by eliminating under and over tightening due to Torqueleader’s proven slipping technology. › Years of dependable service is provided by the robust design especially if regularly calibrated. › Calibration stickers can be easily applied to the purpose designed nose. › To allow for customisation and clear identi� cation, interchangeable coloured end caps are available. › Increased production e� ciency by reducing operator fatigue due to a speci� cally
designed ergonomic handgrip combined with a smooth tool reset action. › To assist with higher torque, T-bars come standard with the Pro and ESD 450 and 1350 models.
162
TORQUE TOOLS
Torque calibration analysers
8612ELECTRONIC TORQUE TESTER DREMOTEST E0.9-3150Nm
8612-050 – 8612-3150Use: › For verifying and setting clockwise torque wrenches and torque screwdrivers.
Features: › Simple, electronic torque tester with integrated torque transducer (DMS). › 4 models in the range from 0.9 to 3150Nm. › Model 8612-3150 with 10mm, 17mm and 36mm hexagonal socket (size
dependent). › Model 8612-3150 with 1“ square drive adapter. › Models 8612-050 - 8612-1000 with 1/4", 3/8" or 1/2"square drive adapter
(depending on the size). › High measurement accuracy: +/- 1 % tolerance of reading, +/- 1 digit. › Break-point measurement (1st peak). › Auto reset. › Can be switched from Nm to lbf·ft. › Serial RS232 interface.
Scope of delivery: › Electronic torque tester. › RS232 cable. › Power supply unit. › 100 - 240 V, 50 - 60 Hz, maximum 500mA (see type plate). › 2 sockets (size and drive model-dependent). › Adapter for 8612-3150. › Operating instructions.
8612-720 – 8612-740 › Guaranteed measuring accuracy: +/-2% of read-out in the core range of 20-100% of the scale. › Double scale in cNm and ozf.in or Nm and lbf.in. › For testing and setting clockwise torque wrenches and screwdrivers in the lower torque range of 0-25Nm.
8612-720
› One piece aluminium lightweight design.
› Clear to read OLED Display for accurate readings.
› Simple one button design for ease of use.
› Supplied with USB connection for portability with ability to use a power bank etc.
› Easy to switch between N.m, lbf.in and lbf.ft units allowing a range of measurements to be used.
› Supplied with an in-house calibration certi� cate.
› Suitable for bench or wall mounting.
› As with all Gedore Torque Tools our products are guaranteed by a 2 year warranty.
› Gedore Torque o� er a full and comprehensive after sales service for all our tools.
CAPTURELITENEW
The latest edition to the Gedore Capture range is Capture Lite. A robust Torque tester for use in industrial, automotive and production environments. Suitable for use with clicker, breaking and slipping wrenches and torque screwdrivers.
The robust construction with aluminium anodised body ensures long tool life. OLED display, safely housed under a robust perspex screen protector allows for a compact design.Capture Lite’s contemporary & high quality appearance means that it is appropriate and well adapted for use in high technology & manufacturing environments.Capture Lite’s power and data links via the USB port located at the rear of the device allow data to be exported if required.
The Torque tester is easy to operate and can be used by operators at any skill level.Easy to read display gives the operator a quick and e� cient method for checking their tools.Designed to give the user con� dence that their Torque tools are operating within limits. Capture Lite has three modes: Peak- displaying the highest torque value reached, First Peak- displaying the � rst peak torque value & Track -progressively tracks the applied torque.To protect the Capture Lite when not in use it is supplied with a protective carry case and USB power cable.
Code No. Nm a „
- „ Dimensions (mm) Hole centres (mm) Accuracy +/- 0
038120 CL 10 1-10 1/4 120x70 90 1% 1.400038160 CL 400 1-400 3/4 120x70 90 1% 1.600
*CL 400 is supplied with 3/8” + 1/2” adaptors
*WHILE STOCKS LAST
163
Code No. - - „
a „ Resolution Adapter Q
„ lbf·ft Nm cNm/Nm ozf.in/lbf.in Gradation 0
1824635 8612-720 * 1/4 1/4 26-130 36-180 2cNm/2ozf.in 10.0001824651 8612-740 * 1/4, 3/8 2.4-12 0.2-2 0.2Nm/2lbf.in 3.200
1947699 8612-050 * 10 0.01 1/4, 3/8 0.7-40.6 0.9-55 3.0001856111 8612-300 * 17 0.1 3/8, 1/2 7-236 9-320 3.0001947702 8612-1000 * 36 1 1/2, 3/4 66-811 90-1100 10.0002529858 8612-3150 * 1 1 369-2323 500-3150 26.000
Code Description Nm Accuracy +/- a „ H x W x D 0
038802 CS1.5 0.1-1.5 1% 1/4 62 x 85 x 65 0.500038805 CS2 0.2-2 1% 1/4 62 x 85 x 65 0.500038807 CS5 0.5-5 1% 1/4 62 x 85 x 65 0.500038810 CS10 1-10 1% 1/4 62 x 85 x 65 0.500038815 CS25 2.5-25 1% 3/8 62 x 85 x 65 0.500038820 CS50 5-50 1% 3/8 62 x 85 x 65 0.570038825 CS100 10-100 1% 1/2 62 x 85 x 65 0.600038830 CS250 25-250 1% 1/2 82 x 120 x 87 1.450038835 CS500 50-500 1% 3/4 82 x 100 x 87 1.600038845 CS1500 150-1500 1% 1 100 x 165 x 134 4.000
CAPTURE DISPLAY AND SENSOR
TOOL BENEFITS AND FEATURES
› Capture Family User layout / menus (Same operation as Capture Display) › Sensors supplied with a UKAS calibration to BS7882 Class 1 or better › On Board Memory – 500 Tools & 2000 Torque reading storage › Capture Manager software compatibility for certi� cate generation › USB connection for data transfer › Clear easy to read display, with limits warnings › Capture Display integrates with competitors’ 2mV/V sensors / transducers, plug n play › Battery or Mains powered
Use:Quality Control (line side checks, etc.)Calibration (Calibration houses, in house calibrations, certi� cate generation, etc.)
Code Description H x W x D 0
038700 Capture Display 80 x 170 x 140 0.780038703 4 way switch (allows 4 sensors to connect to display) 80 x 170 x 140 0.700036246 Capture Cable (Capture Display to Capture Sensor)036226 Capture Cable (Capture Display to Custom Sensor)038710 Capture Manager Software
CAPTURE HUB
Code Description Nm Accuracy +/- a „ H x W x D 0
036910 CH1 0.1-1 1% 1/4 50 x 200 x 110 1.190036920 CH2 0.2-2 1% 1/4 50 x 200 x 110 1.190036930 CH5 0.5-5 1% 1/4 50 x 200 x 110 1.190036930 CH25 2.5-25 1% 3/4 50 x 200 x 110 1.200TBC CL3000
TOOL BENEFITS AND FEATURES
› Capture Family User layout / menus (Same operation as Capture Display) › Supplied with an in-house calibration certi� cate. UKAS calibration is available on request › Auto Filtering for power tools Intelligent software › On Board Memory – 50 Tools & 2000 Torque reading storage › Capture Manager software compatibility for certi� cate generation › Rundown adaptors - Hard, medium and soft joint supplied › Capture Sensor connectivity – ability to connect external sensors, plug n play › Clear easy to read display, with limits warnings
Use:Quality Control (Power tool checks, line side checks, etc.)Calibration (In house calibrations, etc.)
Supplied with an in-house calibration certi� cate. UKAS calibration is available on request
NEW
NEW
164
TORQUE TOOLS
7112-13
7118-19
7212-19
7218-19
› For accessing bolts in cramped and hard-to-reach locations, easy to change. › Forged. › Chrome Vanadium steel, matt chrome plated. › With eject-pin for unlocking.
End fittings 9x12 / 14x18 SE
7112 / 7118 RECTANGULAR OPEN END FITTING9x12-14x18
7212 / 7218 RECTANGULAR RING END FITTING9x12-14x18
› For accessing bolts in cramped and hard-to-reach locations, easy to change. › Forged. › Chrome Vanadium steel, matt chrome plated. › With eject-pin for unlocking.
9x12
14x18
Code No. ! : 4 r Depth gauge 0
7688390 7112-07 7 9 x 12 5.5 20.0 17.5 0.0357688550 7112-08 8 9 x 12 5.5 21.5 17.5 0.0357679050 7112-09 9 9 x 12 5.5 23.0 17.5 0.0357688630 7112-10 10 9 x 12 5.5 24.5 17.5 0.0407688980 7112-11 11 9 x 12 5.5 26.0 17.5 0.0307679560 7112-12 12 9 x 12 5.5 27.5 17.5 0.0357689010 7112-13 13 9 x 12 5.5 29.0 17.5 0.0357689360 7112-14 14 9 x 12 7.5 31.0 20.0 0.0407689440 7112-15 15 9 x 12 7.5 33.0 20.0 0.0407679990 7112-16 16 9 x 12 7.5 35.0 20.0 0.0457689600 7112-17 17 9 x 12 7.5 37.0 20.0 0.0507684560 7112-18 18 9 x 12 7.5 39.0 20.0 0.0607689790 7112-19 19 9 x 12 7.5 41.0 20.0 0.060
Code No. ! : 4 r Depth gauge 0
7689870 7118-13 13 14 x 18 7 30.0 25.0 0.1207690020 7118-14 14 14 x 18 7 32.0 25.0 0.1207690100 7118-15 15 14 x 18 7 34.0 25.0 0.1207685610 7118-16 16 14 x 18 9 35.5 25.0 0.1307690370 7118-17 17 14 x 18 9 37.0 25.0 0.1307686180 7118-18 18 14 x 18 9 39.0 25.0 0.1307690450 7118-19 19 14 x 18 9 41.0 25.0 0.1307686420 7118-21 21 14 x 18 11 45.0 25.0 0.1557690610 7118-22 22 14 x 18 11 47.0 25.0 0.1507690880 7118-24 24 14 x 18 11 51.0 25.0 0.1707690960 7118-27 27 14 x 18 13 58.5 32.5 0.1857691260 7118-30 30 14 x 18 13 67.5 32.5 0.2207687740 7118-32 32 14 x 18 13 67.5 32.5 0.220
Code No. ! : 4 r Depth gauge 0
7691340 7212-07 * 7 9 x 12 8 13.0 17.5 0.0307691420 7212-08 * 8 9 x 12 8 14.2 17.5 0.0357691690 7212-10 * 10 9 x 12 8 17.2 17.5 0.0407691770 7212-11 * 11 9 x 12 8 18.6 17.5 0.0307677940 7212-12 * 12 9 x 12 12 20.0 17.5 0.0357691930 7212-13 * 13 9 x 12 12 21.5 17.5 0.0357692230 7212-14 * 14 9 x 12 12 23.0 17.5 0.0407692580 7212-15 * 15 9 x 12 12 24.0 17.5 0.0407678080 7212-16 * 16 9 x 12 13 26.0 17.5 0.0407692740 7212-17 * 17 9 x 12 13 27.0 17.5 0.0407678160 7212-18 * 18 9 x 12 13 28.5 17.5 0.0407692820 7212-19 * 19 9 x 12 13 30.5 17.5 0.0407678240 7212-21 * 21 9 x 12 15 33.0 17.5 0.040
Code No. ! : 4 r Depth gauge 0
7693120 7218-13 13 14 x 18 12.0 21.5 25 0.1207693390 7218-14 14 14 x 18 12.0 23.0 25 0.1207693470 7218-15 15 14 x 18 12.0 24.2 25 0.1207678320 7218-16 16 14 x 18 12.0 25.7 25 0.1257693630 7218-17 17 14 x 18 12.0 27.2 25 0.1257678830 7218-18 18 14 x 18 12.0 28.5 25 0.1257693710 7218-19 19 14 x 18 12.0 30.5 25 0.1257678910 7218-21 21 14 x 18 15.0 33.0 25 0.1407693980 7218-22 22 14 x 18 15.0 34.5 25 0.1407694280 7218-24 24 14 x 18 15.0 37.5 25 0.1407694440 7218-27 27 14 x 18 17.5 41.5 31 0.1507694790 7218-30 30 14 x 18 17.5 45.0 31 0.1607695920 7218-32 32 14 x 18 17.5 47.5 31 0.165
9x12
14x18
*WHILE STOCKS LAST
165
7412 / 7418 RECTANGULAR REVERSIBLE RATCHET HEAD9x12-14x18
› For accessing bolts in cramped and hard-to-reach locations, easy to change. › Forged. › Chrome Vanadium steel, matt chrome plated. › With eject-pin for unlocking. › Fine-toothed. › 7412 with return angle of 5 degrees › 7418 with return angle of 7 degrees › Maximum continuous load of ratchet according to DIN EN ISO 6789:2003 and/or maximum load of cavity.
754 RATCHET HEAD1/2“-1“
› Enables controlled torque tightening in combination with a DREMOMETER torque wrench. › Forged. › Made from Chrome Vanadium steel. › Fine-pitched, sturdy ratchet head. › With 1/2”, 3/4” and 1” output square drive. › For clockwise tightening.
7418
7412
166
TORQUE TOOLS
9x12 14x18
Code No. a " : 4 r Depth gauge 0
7672710 7412-00 1/4 9 x 12 16.6 25 17.5 0.0607686500 7412-01 3/8 9 x 12 23.2 34 17.5 0.1407687230 7412-02 1/2 9 x 12 24.2 34 17.5 0.1507687580 7418-02 1/2 14 x 18 28.8 47 25 0.3507687660 7418-04 3/4 14 x 18 35.5 64 33 0.780
Code No. a „ 0
7680650 754-02 1/2 0.3507680730 754-04 3/4 1.007680810 754-06 1 2.50
167
ToToTrque
ToToT rque950 lbf·f
tftf
200 lbf·ftftf
270 N·m
2011
Serien-No. DV02.00018
Ratio
Max.Output
ModelMax.Input
1 : 5
1300 N·m
TORQUE MULTIPLIERS
DREMOPLUS ALU
Safety Plus Your advantage
› The slender, lighter structure of the appliances ensures convenient and safe working – even where conditions are particularly cramped. › Repetition-accurate and precise results – supported by individual factory test certi� cates – ensure a maximum degree of job safety. › High degree of resilience and long life of the appliances attributable to a low-backlash planet gear with Ceramic-Te� on® coating. › A 30%+ lighter steel housing thanks to the use of high-performance aluminium. › Each multiplier‘s torque range is checked at the factory and provided with an individual factory test certi� cate. › Precise, reliable � gures – even under extreme climatic conditions › Easy to operate: The most common input/output torques on the torque multiplier.
PRODUCT OVERVIEW TORQUE MULTIPLIERS
DREMOPLUS ALU
DVV-13 Z 3% 1/2" 3/4" 1:5 Z 250 – 1.300Nm
DVI-20 Z 3% 3/4" 1" 1:4 Z 500 – 2.000Nm
DVI-20L 3% 3/4" 1" 1:4 L 500 – 2.000Nm
DVI-28Z 3% 3/4" 1" 1:5,5 Z 500 – 2.800Nm
DVI-28L 3% 3/4" 1" 1:5,5 L 500 – 2.800Nm
DVV-40Z 3% 1/2" 1" 1:16 Z 500 – 4.000Nm
DVV-40ZRS 3% 1/2" 1" 1:16 Z 500 – 4.000Nm
DVV-60ZRS 3% 3/4" 1.1/2" 1:18 Z 700 – 6.000Nm
DVV-80ZRS 3% 3/4" 1.1/2" 1:22 Z 750 – 8.000Nm
DVV-100ZRS 3% 3/4" 1.1/2" 1:28,5 Z 1.000 – 10.000Nm
DVV-130ZRS 3% 3/4" 1.1/2" 1:39 Z 1.200 – 13.000Nm
DVV-540RS 3% 3/4" 2.1/2" 1:175 – 7.000 – 54.000Nm
Serie
s / Ty
pe
Ratio
Reac
tion
arm
Anti-
win
d-up
ratc
het
Overload safety mechanism
Sun
gear
Shea
ring
squa
re
Slip
per
non-
destr
uctiv
e
Cera
mic-
Te�o
n®
coat
ing
Rang
e Nm
te
sted a
nd ce
rti�c
ated
Outp
ut d
rive
Drive
Accu
racy
+ / -
168
TORQUE TOOLSTORQUE MULTIPLIERS
› A � exible o� set reaction arm which has proven itself as the standard solution. › Anchor points are, for instance, adjoining screws, walls, machine parts and other
stable abutments. › This reaction arm can be ideally used where conditions are quite cramped.
Choosing the right reaction armReaction arm Z-form
› This straight reaction arm with adjustable reaction square is admirably suited for � ange screw connections. › The L-form reaction arm‘s support has a larger radius than
the Z-form.
The L-form is also ideal for those points above the screw-tightening level. However, the resulting tilting moment causes the maximum permitted torque to drop by 20%.
Choosing the right reaction armReaction arm L-form
› It is vital that use is made of a torque wrench complete with ratchet function (integrated or separate) for torque multipliers without anti-wind-up ratchet. › For models with an anti-wind-up ratchet, we recommend the use of torque tools
complete with ratchet function (integrated or separate) for ease of working.
Choosing the right torque assembly tool for screws and nuts
169
170
TORQUE TOOLSTORQUE MULTIPLIERS
Torque
Torque2930 lb
f·ft
220 lbf·ft
300 N·m
2011
Serien-No.
Ratio
Max.Output
ModelMax.Input
1 : 16
4000 N
·mDV07.00009
DREMOPLUS ALU FAMILY 3
DVV-13Z
1/2" input square.
Low backlash, single-stage planet
gear for a long service life.
Flexible: With detachable Z-form
reaction arm; can be optionally
retro�tted with long reaction
arm incorporating an adjustable
reaction square (L-form) of
lightweight metal.
Lightweight: High-performance aluminium housing is 30% lighter than a steel one.
Output square 3/4" with drill
hole for impact sockets with
safety pin and ring.
The GEDORE maintenance service promoting service life and safety
› Regular maintenance can considerably lengthen the service life of your GEDORE torque multiplier and also contribute to your safety. › Maintenance involves our quali�ed personnel examining the individual components, testing their
functional precision and verifying the factory certi�cate. › In such an instance, we would gladly give you a quote. › We will, of course, continue to support you should you have any questions on and problems with the
former DREMOPLUS models - just get in touch with us ! › Should a guarantee case arise - then either hand the appliance to your dealer or send it directly to
your nearest Gedore agency.
› Delivery includes factory test certi�cate › The most common input/output torques
on the torque multiplier.
100% quality check
Reaction arm: Forged reaction
arm absorbs any arising counter
force.
171
DVV-13ZG
DVV-13Z
DVV-13Z TORQUE MULTIPLIER DREMOPLUS ALU1300Nm / 950lbf·ft
Particularly suitable for: › Industry, construction sites, car and truck garages, agricultural technology. › Bridge, aircraft and railway construction, ship building, re�neries. › Machinery and plant engineering, maintenance.
Features: › Mechanical hand torque multiplier for controlled screw tightening
and loosening. › With a single-stage planet gear. › High-performance aluminium housing. › With Z-form o�set reaction arm of Chrome Vanadium steel. › Can be optionally retro�tted with L-form straight reaction arm – with adjustable reaction arm
– of lightweight metal. › Multiplication at the ratio of 1:5. › Guaranteed accuracy: Better than +/- 3% tolerance. › For operation in combination with a torque wrench. › 1 model for a maximum load of around a maximum 1300Nm. › Also available as set (No. DVV-13ZG) with three di�erent impact sockets – sizes 27, 30, 32mm. › Output square with drill hole for impact sockets with safety pin and ring.
Scope of delivery: › Torque Multiplier DREMOPLUS ALU. › With Z-form o�set reaction arm. › Delivery in sturdy shipping case with foam insert. › Factory test certi�cate and setting table. › Detailed technical information is available on request.
DVV-13Z
OPTIONAL ACCESSORIES
Code No. < max. Nm Output
< max.lbf·ft Output
g Q „ C a
„ D A B Cmin Cmax Dmin Dmax ; max.
Nm Input$
; max. lbf·ft Input$
0
2653370 DVV-13Z 1300 950 1:5 1/2 3/4 80 133 56 95 165 173 270 200 1.900
Code No. Description A B Cmin Cmax 0
2653400 RL-DVV13 * Reaction arm L-form straight for DVV-13, 3/4“ 80 133 60 159 0.800
172
TORQUE TOOLS
Torque
Torque2930 lb
f·ft
220 lbf·ft
300 N·m
2011
Serien-No.
Ratio
Max.Output
ModelMax.Input
1 : 16
4000 N
·mDV07.00009
DREMOPLUS ALU FAMILY 2
DVI-20L/Z AND DVI-28L/Z
Lightweight: High-performance
aluminium housing is 30 %
lighter than a steel one.
A Z-form forged reaction arm of
chrome-vanadium steel absorbs
any arising counter-force.
DVI-20Z and DVI-28Z › Reaction arm Z-form o� set › � x integrated
DVI-20L and DVI-28L › Reaction arm L-form with adjustable
reaction square drive › � x integrated
3/4" input square
Low backlash, single-stage
planet gear for a long
service life
Output square 1" with drill
hole for impact sockets with
safety pin and ring
Overload safety mechanism
achieved from a classic
shearing square
› Delivery includes factory test certi� cate › The most common INPUT/OUTPUT torques
on the torque multiplier
100% quality check
1:42.000 N-M
1:42.000 N-M
1:5,52.000 N-M
1:5,52.000 N-M
TORQUE MULTIPLIERS
173
DVI-28Z
DVI-28L
DVI-20L/Z & DVI-28L/Z TORQUE MULTIPLIER DREMOPLUS ALU2000-2800Nm / 1500-2050lbf·ft
Particularly suitable for: › Industry, construction sites, car and truck garages, agricultural technology, construction machinery. › Bridge, aircraft and railway construction, ship building, re�neries. › Machinery and plant engineering, maintenance.
Features: › Mechanical hand torque multiplier for controlled screw tightening
and loosening. › With a single-stage planet gear. › High-performance aluminium housing. › Multiplication at the ratio of 1:4, 1:5.5. › Guaranteed accuracy: Better than +/- 3% tolerance. › For operation in combination with a torque wrench. › 2 models for maximum load in the range between maximum 2000Nm and 2800Nm. › Z model: with Z-form, o�set reaction arm of Chrome Vanadium steel. › L model: with L-form straight reaction arm - with adjustable reaction square - of lightweight metal. › Output square with drill hole for impact sockets with safety pin and ring.
Scope of delivery: › Torque Multiplier DREMOPLUS ALU. › With �rmly integrated reaction arm of a Z- or L-form depending on model. › Delivery in sturdy shipping case with foam insert. › Factory test certi�cate and setting table. › Detailed technical information
is available on request.
OPTIONAL ACCESSORIES:
Code No. < max. Nm Output
< max.lbf·ft Output
g Reaction arm Q „ C a
„ D A B Cmin Cmax ; max.
Nm Input$
; max. lbf·ft Input$
0
2653265 DVI-20Z 2000 1500 1:4 o�set 3/4 1 88 131 100 150 580 430 2.9002653273 DVI-28Z 2800 2050 1:5,5 o�set 3/4 1 106 146 100 150 550 410 3.9002653249 DVI-20L 2000 1500 1:4 straight 3/4 1 88 131 73 152 580 430 3.0002653257 DVI-28L 2800 2050 1:5,5 straight 3/4 1 106 146 83 199 550 410 4.100
Code No. Description 0
2653303 RL-DVI20 * Reaction arm L-form straight for DVI20, 1“ 1.2002653338 RL-DVI28 * Reaction arm L-form straight for DVI28, 1“ 1.700
174
TORQUE TOOLS
Torque
Torque2930 lb
f·ft
220 lbf·ft
300 N·m
2011
Serien-No.
Ratio
Max.Output
ModelMax.Input
1 : 16
4000 N
·mDV07.00009
1:164.000Nm
1:186.000Nm
1:228.000Nm
1:28.510.000Nm
1:3913.000Nm
1:17554.000Nm
› Delivery includes factory test certi�cate. › The most common input/output torques
on the torque multiplier.
100% quality check
DREMOPLUS ALU FAMILY 1
DVV-40Z, DVV-40ZRS - DVV-540RS
1/2" or 3/4" input square.
Lightweight and slim: High-performance aluminium housing is 30% lighter than a steel one.
Stable, shuttle-impacted gear housing.
Flexible: With detachable Z-form reaction arm, can be optionally retro�tted with L-form reaction arm and adjustable reaction square.
A ceramic and te�on coating of the tooth �anks constantly lubricates the gear with a minimal grease.
A 1", 1.1/2" or 2.1/2" output square with drill hole for impact sockets with safety pin and ring.
A Z-form forged reaction arm of chrome vanadium steel absorbs any arising coun-ter-force. Optional: L-form reaction arm on request.
Overload safety mechanism: Non-destructive overload safety mechanism - Slipper - �led as a patent. Triggers overload at 10% and then clicks into place again. Clockwise and anti-clockwise.
Convenient: Integrated RS anti-wind-up ratchet for safe working. Bi-directional (apart from model DVV-40Z).
Low backlash, 2-stage planet gear for a long service life.
TORQUE MULTIPLIERS
175
B
A
a
Q
Cmin.
Cmax.
DVV-40Z
DVV-40ZRS
DVV-40Z & DVV-40ZRS TORQUE MULTIPLIER DREMOPLUS ALU4000Nm / 2930lbf·ft
Particularly suitable for: › Machinery and plant engineering. › Cable cars, lifts and masts. › Heavy industry, construction sites. › Bridge construction. › Ship building, aircraft and railway construction. › Re�neries, plastics industry. › Power plants of all kinds.
Features: › Mechanical hand torque multiplier for controlled screw tightening
and loosening. › With a two-stage planet gear. › High-performance aluminium housing. › Torque multiplication ratio: 1:16. › DVV-40ZRS model with anti-wind-up ratchet (RS). › With non-destructive Slipper overload safety mechanism
for gear protection - clockwise and anti-clockwise. › Z-form, o�set reaction arm depending on model made of Chrome Vanadium steel. › Can be optionally retro�tted with L-form straight reaction arm -
with adjustable reaction arm - of lightweight metal. › Guaranteed accuracy: Better than +/- 3% tolerance. › For operation in combination with a torque wrench. › 2 models for a maximum load of around a maximum 4000Nm. › Output square drive with a drill hole for sockets or
impact sockets with safety pin and ring.
Scope of delivery: › Torque Multiplier DREMOPLUS ALU. › With Z-form o�set reaction arm. › Delivery in sturdy shipping case with foam insert. › Factory test certi�cate and setting table. › Detailed technical information is available on request
OPTIONAL ACCESSORIES:
Code No. < max. Nm Output
< max.lbf·ft Output
g Q „ C a
„ D A B Cmin Cmax Dmin Dmax ; max.
Nm Input$
; max. lbf·ft Input$
0
2653087 DVV-40Z 4000 2930 1:16 1/2 1 88 212 71 136 250 256 300 220 5.4002653109 DVV-40ZRS 4000 2930 1:16 1/2 1 88 227 71 136 264 270 310 230 5.700
Code No. Description A B Cmin Cmax 0
2653184 RL-DVV40 * Reaction arm L-form straight for DVV40, 1“ 88 212 86 234 1.700
*WHILE STOCKS LAST / INDENT ONLY
176
TORQUE TOOLS
B
A
a
Q
Cmin.
Cmax.
DVV-60ZRS - DVV-130ZRS TORQUE MULTIPLIER DREMOPLUS ALU6000-13000Nm / 4400-9530lbf·ft
Particularly suitable for: › Machinery and plant engineering. › Cable cars, lifts and masts. › Heavy industry, construction sites. › Bridge construction. › Ship building, aircraft and railway construction. › Re�neries, plastics industry. › Power plants of all kinds.
Features: › Mechanical hand torque multiplier for controlled screw
tightening and loosening. › With a two-stage planet gear. › High-performance aluminium housing. › Torque multiplication ratio: 1:18, 1:22, 1:28.5, 1:39. › All models with anti-wind-up ratchet (RS). › With non-destructive Slipper overload safety mechanism
for gear protection - clockwise and anticlockwise. › Z-form, o�set reaction arm depending on model made of Chrome Vanadium steel. › Can be optionally retro�tted with L-form straight reaction arm
- with adjustable reaction arm - of lightweight metal. › Guaranteed accuracy: Better than +/- 3% tolerance. › For operation in combination with a torque wrench. › 4 models for maximum load between 6000Nm and maximum 13000Nm. › Output square drive with a drill hole for sockets or
impact sockets with safety pin and ring.
Scope of delivery: › Torque Multiplier DREMOPLUS ALU › With Z-form o�set reaction arm › Delivery in sturdy shipping case with foam insert › Factory test certi�cate and setting table › Detailed technical information is available on request
OPTIONAL ACCESSORIES:
Code No. < max. Nm Output
< max.lbf·ft Output
g Q „ C a
„ D A B Cmin Cmax Dmin Dmax ; max.
Nm Input$
; max. lbf·ft Input$
0
2653117 DVV-60ZRS * 6000 4400 1:18 3/4 1.1/2 102 257 110 190 316 324 400 300 10.5002653125 DVV-80ZRS * 8000 5870 1:22 3/4 1.1/2 128 277 110 190 338 342 420 310 13.4002653133 DVV-100ZRS * 10000 7330 1:28,5 3/4 1.1/2 142 292 120 216 350 356 410 305 13.9002653141 DVV-130ZRS * 13000 9530 1:39 3/4 1.1/2 175 306 (126) (229) (372) (379) 380 280 20.900
Code No. Description A B Cmin Cmax 0
2654091 RL-DVV60-80 * Reaction arm L-form straight for DVV60-80, 1.1/2“ 102/128 256,2/276,5 120/120 315/315 4.000
*WHILE STOCKS LAST / INDENT ONLY
TORQUE MULTIPLIERS
177
DVV-540RS TORQUE MULTIPLIER DREMOPLUS ALU54000Nm / 40330lbf·ft
Particularly suitable for: › Heavy industry. › Oil industry. › Petrochemicals.
Features: › Mechanical hand torque multiplier for controlled screw tightening and loosening. › With a three-stage planet gear. › High-performance aluminium housing. › Chrome Vanadium steel reaction arm. › Multiplication at the ratio of 1:175. › With anti-wind-up ratchet (RS). › With non-destructive Slipper overload safety mechanism
for gear protection - clockwise and anti-clockwise. › With �xture for welding on a reaction arm (optional). › Guaranteed accuracy: Better than +/- 3% tolerance. › For operation in combination with a torque wrench. › 1 model for a maximum load of around a maximum 54000Nm. › Output square drive with a drill hole - for sockets or impact sockets with a safety
pin and ring.
Scope of delivery: › Torque Multiplier DREMOPLUS ALU. › Delivery in a sturdy crate on pallet. › Setting table. › Detailed technical information is available on request.
SPECIAL REACTION ARMS AS WELL AS TECHNICAL ADVICE CAN BE
OBTAINED ON REQUEST.
› Please contact us with any queries and for advice. › Your query is our priority.
Code No. < max. Nm Output
< max.lbf·ft Output
g Q „ C a
„ D A B ; max.
Nm Input$
; max. lbf·ft Input$
0
2653168 DVV-540RS * 54000 40330 1:175 3/4 2.1/2 270 415 380 280 64.500
*WHILE STOCKS LAST / INDENT ONLY
PULLERS
UNIVERSAL PULLERS
180
NUT SPLITTERS
183
EXTRACTOR SETS
185
HSP SPINDLES
182
STUD EXTRACTORS
183
PULLER KITS
185
SAFETY COVER
183
SPECIAL PULLERS
184
PEGBOARD KITS
186
Code No Running Depth Max. Opening 0
040150 8220-10 105 110 1.200040180 8220-20 160 180 3.100040210 8220-30 * 210 280 8.500040160 8220-10L 200 110 1.800040190 8220-20L 310 180 4.500040220 8220-30L * 410 280 11.600
8220-20
8220-20HSP
Code No y 0
040170 8220-10P 151 0.900040200 8220-20P 220 2.00040230 8220-30P 308 5.00
Code No Running Depth Max. Opening 0
040460 8220-20HSP1 Puller & Spindle * 90 180 3.600040470 8220-30HSP3 Puller & Spindle * 100 280 9.900040480 8220-20L HSP1 Puller & Spindle * 90 180 5.100040490 8220-30L HSP3 Puller & Spindle * 100 280 13.100
› For the safe and fast removal of discs, pulleys, wheels, ball bearings etc. › Strong drop forged design. › Reversible hooks permit use as an internal or external puller. › Available in standard length or with extensions for extra length.
Code No Running Depth Max. Opening 0
040427 8562-1 50 60 0.200040428 8562-2 70 70 0.220
Code No Running Depth Max. Opening 0
040417 8563-1 55 60 0.310
8220P
180
PULLERS
*WHILE STOCKS LAST
8220 TWIN GRIP PULLERS
Universal Pullers
› For removing small parts such as battery terminals, pulleys, wheels, ball bearings etc.
8562 TWIN GRIP PULLERS
› For removing small parts such as battery terminals, pulleys, wheels, ball bearings etc.
8563 TRIPLE GRIP PULLER
Code No Running Depth Max. Opening 0
040010 8564-2 100 110 1.000040030 8564-3 140 150 1.900040050 8564-4 200 200 2.300040440 8564-4 HSPIL Puller & Spindle * 105 200 3.700
Code No Running Depth Max. Opening 0
040020 8565-2 80 120 1.300040040 8565-3 140 160 2.500040060 8565-4 200 220 4.000040450 8564-4 HSPIL Puller & Spindle 105 220 4.600
Code No Running Depth Max. Opening 0
040070 8566-1 300 300 9.800040080 8566-2 400 400 10.800040495 8566-1 HSP3 Puller & Spindle * 105 300 10.100040500 8566-2 HSP3 Puller & Spindle * 110 370 11.100
Code No Running Depth Max. Opening 0
040090 8567-1 400 350 11.900040100 8567-2 400 420 13.000040505 8567-1 HSP3 Puller & Spindle * 110 345 12.100040510 8567-2 HSP3 Puller & Spindle 110 350 13.300
Code No Running Depth Max. Opening 0
040110 8568-1 100 150 0.800040130 8568-2 140 200 1.900
Code No Running Depth Max. Opening 0
040120 8569-1 80 150 1.100040140 8569-2 140 200 2.700
8564 TWIN GRIP PULLERS
8565 TRIPLE GRIP PULLERS
8566 TWIN GRIP PULLERS
8567 TRIPLE GRIP PULLERS
8568 TWIN GRIP PULLERS
8569 TRIPLE GRIP PULLERS
› Suitable for industrial purposes and heavy agricultural as well as construction machines.
› Heavy duty model for the removal of discs, pulleys, wheels, ball bearings etc.
› Heavy duty model for the removal of discs, pulleys, wheels, ball bearings etc.
181
*WHILE STOCKS LAST
*WHILE STOCKS LAST *WHILE STOCKS LAST
8563 TRIPLE GRIP PULLER
Code No Running Depth Max. Opening 0
8006190 1.15/1 140 130 1.200
8006350 1.15/2 210 200 3.300
Code No Force Capacity Puller Ref. 0
040350 HSP1L * 6-ton - Twin Grip10-ton - Triple Grip
8564-48565-4
1.300
040360 HSP1 6-ton - Twin Grip 8220-208220-20L
1.200
040400 HSP3 * 8-ton - Twin Grip12-ton - Twin Grip15-ton - Triple Grip
8220-308220-30L8566-18566-28567-18567-2
3.300
1.15 TRIPLE GRIP PULLERS
HSP GREASE HYDRAULIC PRESSURE SPINDLES
› The grease hydraulic pressure spindle has been designed for controlled and safe pulling work and is set up for a pressure of up to 15t.
182
PULLERS
*WHILE STOCKS LAST
2
5 6
43Hydraulic bolt
Grub screw
Hydraulic spindle
Tip
Ball Ø 9/16“ or 5/8“
Adjusting cap nut
1
HSP GREASE HYDRAULIC PRESSURE SPINDLEThe grease hydraulic pressure spindle has been designed for controlled and safe extraction forces of up to 15t.
› Before using, check whether the pressure spindle is screwed far enough out of the cap, so that the pressure pad is in the initial position in the hydraulic cylinder. › Unscrew the cap from the spindle body. First slacken o� the grub screw. › Screw the spindle body into the crossbeam of the puller from below until the body protrudes
approximately 60mm from the crossbeam. › Screw the cap onto the spindle body until it stops and then �x it in position by turning in the grub
screw.
› Place the puller into position and pre-tension the spindle body using a size 32mm or 41mm wrench. › Screw the pressure spindle size 12mm or 17mm into the cap. The hydraulic process will come into
play. The workpiece that has been loosened by the hydraulic force may be pulled o� completely by turning the spindle body with the 32mm or 41mm cap. › After use, the pressure spindle (size 12mm or 17mm) is turned back into its initial position and the
pressure pad is pushed into the hydraulic cylinder.
Preperation for use: Preperation for use:
› Heavy duty model for the removal of discs, pulleys, wheels, ball bearings etc.
Code No 0
1868195 5.10 * 1.500Code No for nuts $ max. t 0
040790 1.26/1 7-22 mm, M4-M14 12 5.0 0.800040870 1.26/2 22-36 mm, M14-M24 12 13.0 3.400
Code No Ø-Stud 0
041010 8600-1 4-10 0.290041020 8600-2 8-25 0.570
Code No C p $ 0
8012750 1.30/0 * 5-8 M10 10 0.1208012830 1.30/1 * 8-12 M10 10 0.1208012910 1.30/2 * 12-15 M10 10 0.1308013130 1.30/3 * 15-19 M10 14 0.1708013480 1.30/4 * 19-25 M10 14 0.2008013560 1.30/4A * 25-30 M10 14 0.3008013640 1.30/5 * 30-35 M10 14 0.4008013720 1.30/6 * 35-45 M14 x 1,5 17 0.650
Special Tools
5.10 SAFETY COVER
› At pulling forces of 18t, these PVC safety covers provide maximum active safety protection from suddenly detaching ball bearings, driving pinions or small parts. The safety covers are extremely �exible, making them suitable for all applications. › Dimensions 510 x 915mm. › Double-ply welded = double safety (total thickness at 0.5mm = 1.0mm). › Tear strength: longitudinal 23N/mm2 - lateral 21N/mm2.
› Two straps for variable adjustment. › Press stud fasteners for added safety - no �apping ends. › UV resistant. › Temperature resistant at -25 °C to +50 °C. › Supplied in a carry bag which guarantees a long service life.
1.26/1 HYD
1.26/2 HYD
1.26/HYD NUT SPLITTERShydraulic
› With strong chisel, additionally induction hardened. › At the cutting edge for breakage resistance. › The chamfer at the chisel's edge improves the
splitting e�ect and prevents breakage. › With smooth chisel function.
› Channel walls rolled, thus mirror-smooth and wear resistant. › For nuts up to property class 10. › Chisel replaceable. › For splitting jammed or stripped nuts without .
damaging the bolt thread.
8600 STUD EXTRACTORS
› For inserting and removing studs. › Suitable for extremely short stud ends.
1.30/N INTERNAL EXTRACTORSwith reinforced shoulder
› For extremely tightly packed ball bearings,bearing races, bushes, shaft seals and circlips. › The shoulder of the shell jaw must be applied behind the bearing.
183
*WHILE STOCKS LAST
*WHILE STOCKS LAST
184
PULLERS
Code No $ p 0
8016580 1.36 / 1 27 M10 0.7508016660 1.36 / 2 32 M14 x 1,5 1.650
Code No A O For puller C 0
8019680 1.40/0 5-60 1.38/0 M10 1.1008019760 1.40/1 12-75 1.38/1 M10 3.6008019840 1.40/2 22-115 1.38/2 M14x1,5 2.3008019920 1.40/3 30-155 1.38/3 M18x1,5 4.400
Code No For separator a b $ 0
8017550 1.38/0 1.40/0 40-120 125 17 1.0008017630 1.38/1 1.40/1 60-165 180 19 1.1008017710 1.38/2 1.40/2 70-215 195 22 3.4008017980 1.38/3 1.40/3 90-300 205 27 6.500
Code No Leg length up to Clamping reach $ 0
8028240 1.67/1 135 35-90 17 0.900
1.36SUPPORT BRACE
› Operation: The counter-support brace is placed on the housing and the spindle screwed onto the spindle of the internal extractor. The toggle is held � rmly and the bearing extracted by tightening the nut.
C
A
1.40SEPARATORS
› For removing taper roller and ball bearings, inner bearing races and other tightly-seated or thin-walled parts. › Operation: The sharp edges of the separator
blades are pressed behind the part and it is then withdrawn using the 1.38 puller. › To avoid damage to delicate parts, the � at surfaces
of the separator are used. › This produces a large support surface that prevents
deformation.
1.38SEPARATOR PULLERS
› These separator pullers are used together with the bearing separators 1.40. › The tension bolts are screwed into the threaded
holes in the bearing separators.
1.67STEERING WHEEL PULLERfor cars
› Contains 1 pair of short legs, 1 pair of long legs and a protective cap for the thread of the steering column.
Code No 0
6759890 8551-88 Bolt Extractor Set 0.724Sizes 1 2 3 4 5 6 7 8
Code No Clamping height Fork Depth O 0
8030810 1.73/1 65 24 23 0.730
8551BOLT EXTRACTOR SET
› Made from Chrome Vanadium steel-35HRC. › In sturdy plastic case.
Operation › Drill a central hole into the broken bolt. › Turn the bolt extractor to the left into the hole until it
grips and removes the bolt. › Always use the maxiumum extractor size.
1.73UNIVERSAL BALL JOINT PULLER
› For removing ball joints on cars.
Puller Kits
Code No. Contents 0
2838362 1100-1.04 L-Boxx® 136 no. 1100L+ Assortment no. 1100 CT2-1.04
6.300
1100-1.04 UNIVERSAL PULLER SETin L-BOXX® 136
› Maximum capacity up to 5t. › 2- and 3-arm cross-beam. › With rigid and slim legs and extensions. › 12 di�erent pullers can be combined. › External Ø up to 130mm, internal Ø up to 170mm with a
200mm clamping reach. › 1100 CT2-1.04 to retro�t existing L-BOXX®es 136.
1.07/K PULLER SETwith 9 legs
› In plastic case. › Dimensions: 120 x 250mm.
Code No. Contents max.t A $ 0
8117340 1.07/K 2-arm Cross Piece3-arm Cross Piece3 x Pulling Hooks - 100mm3 x Pulling Hooks - 200mm3 x Slim Pulling Hooks - 250mm
2.5 M 14x1,5 x 140 17 5.800
1.31 INTERNAL EXTRACTOR SET
› For extremely tightly packed ball bearings, bearing races, bushes, shaft seals and circlips.
Code No. Contents 0
8014610 1.31/1 6 internal extractors 12-46mm, No. 1.30/2 - /62 counter-support braces No. 1.36/1 - /2
6.400
185
*WHILE STOCKS LAST
*WHILE STOCKS LAST
1.85/1 PROFESSIONAL PLASTIC BEARING INSTALLATION SET
› Sturdy plastic bearing installation set. › Impact resistant plastic is light but as robust
as metal variants. › This set guarantees that the installed bearings
will not su�er the damage that might have
Code No. Contents 0
1120778 1.85/1 * 33 impact rings, 10-50mm for external Ø 26-110mm3 aluminium impact sleeves1 recoil-free bodywork hammer with nylon heads (1.2kg)
5.200
1101-1.29/3K BALL BEARING EXTRACTOR SET
Code No. Contents For ball bearing No. 0
2964392 1101-1.29/3K * 4 Heads with spindle no. 1.29/1-1.29/57 Heads with spindle no. 1.29/10-1.29/451 Handle no. 1.29/0
6000 6001 6002 6003 6004 6005 6006 6007 6008 6009 6010 6011 6012 6200 6201 6202 6203 6204 6205 6206 6207 6208 6209 6210 6211 6212 6213 6300 6301 6302 6303 6304 6305 6306 6307 6308 6309 6310 6311 6403 6404 6405 6406 6407
5.800
occured when working ‘metal to metal’. › Ensures no deformations of the bearing
housings, sealing rings or shafts.
› Ball bearing extractor set for more than 40 ball bearings. › For removing ball bearings that are both
on a shaft and in a housing. › Non-destructive removal of deep-groove ball
bearings without dismantling the shaft; no need to drill open the bearing cage (no chippings).
› With Check-Tool insert. › Insert for use in drawers with minimum
dimensions 340 x 260 x 60mm. › In GEDORE i-BOXX® 72 No. 1101 L. › Dimensions: 367 x 316 x 72mm.
186
PULLERS
2.20 TRUCK WORKSHOP KIT
2.30 INDUSTRIAL PULLER KIT
› For the assembly of 1.06 and 1.07 pullers. › Clearly arranged modular system on pegboard.
2.40 CONSTRUCTION MACHINE KIT
› Clearly arranged modular system on pegboard.
› For the assembly of 1.14 and 1.15 pullers. › Clearly arranged modular system on pegboard.
Code No. Contents 0
1088718 2.20LKW 2-arm Cross Piece - 260mm3-arm Cross Piece - 260mm3 x Pulling Hooks - 100mm3 x Pulling Hooks - 300mm3 x Slim Pattern Pulling Hooks - 220mmSpindleHydraulic Pressure SpindleBearing Separator
25.000
Code No. Contents 0
1393014 2.30 4 x 2-arm cross pieces 140 180 220 260mm4 x 3-arm cross pieces 140 180 220 260mm2 x SpindlesHydraulic Pressure Spindle6 x Pulling Hooks
19.600
Code No. Contents 0
1393030 2.40 2 x 2-arm Heads2 x 3-arm Heads3 x Pulling Hooks - 210mm3 x Pulling Hooks - 260mm3 x Pulling Hooks - 390mm2 x SpindlesHydraulic Pressure Spindle
24.900
187
= > > >
SAFETY NOTESPULLERS
› Read the operating instructions! › Use only original spare parts and accessories for your Gedore puller. Never use worn, modi� ed or
defective spare parts or accessories. › Wear goggles and protective clothing when working. For added safety, use the Gedore safety
cover 5.10!
› Before pulling, ensure that the legs are in contact with the part to be pulled and are � rmly tightened so that the spindle operates centrally along the axis of the puller. › Attention! When using a puller, forces of up to several tons are generated! Take care to ensure
that the puller is correctly positioned and is vertical to the component being pulled. › Do not use electric or pneumatic power or percussion drivers.
INDUSTRIAL KIT CAR WORKSHOP KIT
› Clearly arranged modular system on pegboard. › Clearly arranged modular system on pegboard.
*WHILE STOCKS LAST
Code No. Contents 0
634840 Industrial Puller Kit * 8220-20 Universal Twin Grip Puller8220-20P Extension8565-4 Triple Grip PullerHSP 1 Hydraulic Pressure Spindle8569-2 Universal Triple Grip Puller8600-2 Stud Extractor248 ST Recoil Free Hammer1450S Tool Panel (Including Hooks)
19.600Code No. Contents 0
634859 Car Workshop Puller Kit 8220-10 Universal Twin Grip Puller8220-10P Extensions8562-2 Battery Terminal Puller8565-2 Triple Grip Puller8569-1 Universal Triple Grip Puller8600-2 Stud Extractor1.38-0 Separator Puller1.40-0 Bearing Separator1.73-1 Ball Joint Puller1.75-1 Oil Filter Hook248 ST Recoil Free Hammer1450S Tool Panel (Including Hooks)
13.600
NON SPARKING
TOOLS
SPANNERS / SETS
190
(1/4”) SOCKET SET
192
ADJUSTABLE WRENCH
193
(1/2”) SOCKETS
191
SCREWDRIVER SET
192
COMBINATION PLIERS
193
(1/2”) ACCESSORIES
191
PIPE WRENCH
193
SIDE CUTTERS
193
190
NON-SPARKING TOOLS
WHY THE NEED FOR NON-SPARKING TOOLS?
› Made either from proven, low-sparking special bronze and copper/beryllium alloys or from other non-spark inducing materials. › The spanners are cast and not forged for your own safety. › Corrosion resistant, even against salt water. › Copper/beryllium tools are non-magnetic. › Non-sparking tools are not as hard as conventional ones and must be used
with care.
› Using non-sparking tools must not be the only protective measure taken in aeas of �re or explosion risk. › It would be more accurate to refer to ‘low spark’ since ignitable sparks cannot
be 100% prevented with the use of non-sparking tools.
The recommendation is to use GEDORE non-sparking tools in all areas where there are combustible or easily ignitable vapours, liquids and dusts as well as where sparks can potentially cause a �re or explosion.
Non-Sparking Combination Spanners
GED0130 COMBINATION SPANNERS
› With same size on each end. › Bi-hexagon ring.
Code No. ! y 0
2510855 GED0130006S 6 130 0.0502510847 GED0130007S 7 130 0.0552510839 GED0130008S 8 135 0.0 552510820 GED0130009S 9 150 0.0 952509148 GED0130010S 10 150 0.0852509121 GED0130011S 11 150 0.0 902509113 GED0130012S 12 190 0.1702509105 GED0130013S 13 190 0. 1652509091 GED0130014S 14 190 0. 1602509083 GED0130015S 15 210 0.2302509075 GED0130016S 16 210 0.2302509067 GED0130017S 17 210 0.2202509040 GED0130018S 18 230 0.330
Code No. ! y 0
2509032 GED0130019S 19 230 0.3302509024 GED0130020S 20 230 0.3252509016 GED0130021S 21 250 0.3602509008 GED0130022S 22 250 0.3552508990 GED0130023S 23 250 0.3502508982 GED0130024S 24 270 0.5002508974 GED0130025S 25 270 0.4752508966 GED0130026S 26 270 0.4702508958 GED0130027S 27 280 0.6652508923 GED0130028S 28 280 0.6802508915 GED0130029S 29 280 0.6302508907 GED0130030S 30 300 0.7302508893 GED0130032S 32 300 0.650
GED0130 COMBINATION SPANNER SETS
› Sets made up of the most popular sizes.
Code No. Contents 0
2493551 GED0130003S-11 Pieces 8 10 11 12 13 14 16 17 18 19 22 2.2002493578 GED0130001S-12 Pieces 10 11 12 13 14 17 19 22 24 27 30 32 4.100
191
Non-Sparking Sockets & Accessories 1/2“
GED035 HEXAGON SOCKETS 1/2“
› Hand operated.
Code No. ! y 0
2496518 GED0350612S 6 40 0.0502496488 GED0350712S 7 40 0.0552496437 GED0350812S 8 40 0.0502496410 GED0350912S 9 40 0.0502523795 GED0351012S 10 40 0.0502523671 GED0351112S 11 40 0.0502523523 GED0351212S 12 40 0.0502523507 GED0351312S 13 40 0.0502523485 GED0351412S 14 40 0.0552523469 GED0351512S 15 40 0.0552523442 GED0351612S 16 40 0.0602523434 GED0351712S 17 40 0.0652523426 GED0351812S 18 40 0.075
Code No. ! y 0
2523396 GED0351912S 19 40 0.0852523361 GED0352012S 20 40 0.0952523353 GED0352112S 21 40 0.1002523337 GED0352212S 22 40 0.1102523302 GED0352312S 23 40 0.1202517965 GED0352412S 24 40 0.1252523280 GED0352512S 25 40 0.1302523264 GED0352612S 26 40 0.1452523248 GED0352712S 27 40 0.1502523213 GED0352812S 28 40 0.1752523183 GED0352912S 29 40 0.1852523167 GED0353012S 30 40 0.1952523140 GED0353212S 32 42 0.240
GED0360 REVERSIBLE RATCHET 1/2
GED042 EXTENSIONS 1/2
GED410 SWIVEL HANDLES 1/2
› For hand operated sockets. › For hand operated sockets.
› For hand operated sockets.
Code No. y 0
2513684 GED0360012C 250 0.590
Code No. y 0
2506335 GED0420002S 100 0.1802506270 GED0421434S 200 0.3152506319 GED0420121S 250 0.360
Code No. y 0
2507927 GED0410013S 250 0.5602507897 GED0410016S 300 0.920
1B COMBINATION SPANNERS 6
192
NON-SPARKING TOOLS
GED0400 SLIDING T-BAR 1/2
› For hand operated sockets.
GED0400 UNIVERSAL JOINT 1/2
GED0430 SOCKET SET 1/2
› In plastic case. › Picture may di�er from actual product.
GED080 SCREWDRIVER SET5 pieces
› Picture may di�er from actual product.
Code No y 0
2511886 GED0400114S 250 0.450
› For hand operated sockets.
Code No y 0
2514788 GED0400118S 70 0.135
Code No. Contents 0
2503239 GED0430002S Reversible Ratchet 1/2”Extension 1/2” 150mmSliding T-bar 1/2” 320mmSwivel handle 1/2” 380mmSockets: 10 11 12 13 14 15 16 17 18 19 2 0 21 22 23 24 25 26 27 28 29 30 32mm
4.100Code No. Contents 02499061 GED0800002C 4,5x100mm
6x100mm 6x150mm 8x150mm PH1 PH2
0.515
193
Code No y 0
2522659 GED0662650C 190 0.290
GED053 PIPE WRENCH
› American pattern.
GED048 ADJUSTABLE WRENCHES
GED060 COMBINATION PLIERS
GED066 POWER SIDE CUTTERS
› With two-component handle.
Non-Sparking Wrenches/Pliers
Code No y 0
2514753 GED0602000C 200 0.425
› With two-component handle.
Code No y 0
2517310 GED0530385S 385 1.370Code No y 0
2503166 GED0482000C 200 0.2002503158 GED0482500C 250 0.4002503131 GED0483000C 300 0.700
ELECTRICIAN‘S & REFRIGERATION MECHANIC‘S
200
APPRENTICE
TOOLKITS
CONSTRUCTION MACHINERY
196
MECHANIC‘S / AUTOMOTIVE
198-199
APPRENTICE TRUNK
201
196
APPRENTICE TOOLKITS
CONSTRUCTIONMACHINERY TOOLKITFor construction apprentices and tradesmen.
b
c
d
e
1525 Tool Trolley
1425 Tool Chest
Foam Inserts 1525-41-1B 1525-41-400 1525-41-403 1525-41-4550 1525-41-D321525-41-8601 1525-27-621525-27-PH 1525-27-PL
62P 150, 450mm Adjustable Wrenches
145-10CUniversal Pliers
137-250Grip Pliers
8000-A2Circlip Pliers
8000-J2Circlip Pliers
8250-200 JCCombination Pliers
8132-200 JCTelephone Pliers
8316-200 JCSide Cutters
8531-250Tin Snips
8601-500, 900Ball Pein Hammers
248-STReccoil Free Hammer
R9250Rubber Mallet
95-125, 150, 175Flat Chisel
116Pin Punch Set
4550-20Torque Wrench
702-21MFeeler Gauge Set
R93000006Key File Set
R9455-05Tape Measure - 5m
Scriber-MS/ST-190mm
Digital Multimeter
Code No. 0
668119 Construction Machinery Toolkit 145.53
197
Caliper-Vernier -150x0.02mm
File Thread Restorer
403Hacksaw
3081L-Handle
3090-125, 250Extensions
3019Adapter
3095Universal Joint
3087Sliding T-bar
3093-Z94Reversible Ratchet
1995Universal Pliers
1990-75,125,250Extensions
1985Speed Brace
1987Sliding T-bar
1997-375Swivel Handle
1993-U10TReversible Ratchet
3295Universal Joint 3/4”
3290-200, 400Extensions
3287Sliding T-bar
3293-U1Reversible Ratchet
3296Swivel Handle
R4510-50, 150mmExtensions
R45200022Slidng T-bar
R45300005Universal Joint
R40000027Reversible Ratchet
R4100 Sockets-4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14
D30 Sockets-8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 7/16 AF, 9/16 AF, 7/8 AFC19 Sockets- 8-5/16, 10-3/8, 11, 12, 13-1/2, 14, 15-19/32, 16-5/8, 17, 18-11/16, 19-3/4, 21-13/16, 22, 24-15/16, 26-1., 27-1.1/16, 29-1.1/8, 30-1.3/16, 32-1.1/4
D19 Sockets- 5/16 AF, 3/8 AF, 7/16 AF, 1/2AF, 9/16 AF, 5/8 AF, 11/16 AF, 3/4 AF, 13/16 AF, 7/8 AF, 15/16 AF, 1 AF, 1.1/16 AF, 1.1/8 AF
C32 Sockets-19-3/4, 22-7/8, 24-15/16, 26-1, 27-1.1/16, 29-1.1/8, 30-1.3/16, 32-1.1/4, 33-1.5/16, 38-1.1/2, 41-1.5/8, 46-1.13/16, 50-2
D32 Sockets-1.3/8 AF, 1.7/16 AF, 1.11/16 AF, 1.3/4 AF, 1.7/8 AF
R4245 Male Torx-T10, T15, T20, T25, T27, T30, T40
IKS 20 PZ Sockets-PZ 1, PZ 2, PZ 3
R4255 Allen Key Sockets-3, 4, 5, 6, 8, 10
IKS 20 PH Sockets-PH 0, PH 1, PH 2, PH 3
R4120 Female Torx-E5, E6, E7, E8, E10
ITX19 Sockets-T20, T25, T27, T30, T40, T45, T50
TX19 Sockets-E10, E12
TX30 Sockets-E5, E6, E7, E8
IN19 Sockets-5/16 AF, 3/8 AF, 1/2 AF, 9/16 AF, 5/8 AF
1B Combination Spanners-6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 32
1.1/4AF, 1.5/16AF, 1.3/8AF, 1.1/2AF, 1.1/8 AF, 1.1/16 AF
1B13A-1/4AF, 5/16AF, 3/8AF, 7/16AF, 1/2AF, 9/16AF, 5/8AF, 11/16AF, 3/4AF, 13/16AF, 7/8AF, 15/16AF, 1AF400 Flare Nut Spanners-17x19, 22x24, 7/16x1/2, 9/16x5/8, 5/16x3/8
42L-9M Long Allen Keys Set-1.5, 2, 2.5, 3, 4, 5, 6, 8, 10
42-9P Allen Keys Set-1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 1/4”, 5/16”, 3/8”
2150 3C Screwdriver 4 6.5 10
2160 3C ScrewdriverPH1 PH2 PH3
198
APPRENTICE TOOLKITS
MECHANIC‘STOOLKIT
95-300 Flat ChiselCode: 86993700 0.560R94420021 VernierCode: 33014300 0.320R9455-05 Tape MeasureCode: 33014280 0.200227-350 Pipe WrenchCode: 6453460 1.62Suction Lifter-19mmCode: 01201300 0.020Suction Lifter-22mmCode: 01201200 0.020Circuit TesterCode: 01201000 0.040Tyre Pressure GaugeCode: 01201100 0.120400-5M Flare Nut Spanner SetCode: 6340260 0.710INX19 PM-5D Allen Key Socket SetCode: 6179890 1.32
For diesel, forklift, motor, tractor, motorcycle, diesel fuel injection mechanic, diesel fitter apprentices and tradesmen.
1410 Tool Chest
D19 Sockets- 8, 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 22, 23, 24, 26, 27, 28, 30, 321B Combination Spanners-6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24534 Swivel Head Spanners-10, 11, 12, 13, 14, 15, 16, 17, 19
62P 200, 300mmAdjustable Wrenches
8601-100, 700Ball Pein Hammers
248-STRecoil Free Hammer
42-88M-2, 2.5, 3, 4, 5, 6, 7, 8, 9, 10Allen Keys Set
42-88P-3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”, 3/8”Allen Keys Set116Pin Punch Set
2160PH1 PH2
21504 5.5 6.5 8 10
8531-250Tin Snips
36/1Oil Filter Wrench
Safety Glasses
10pc Drill Bit Set
Thread Restorer
Flat File-250
Round File-250
Half-Round File-250
100-16Centre Punch
95-175, 200Flat Chisel
Stainless Steel Ruler-300mm
Engineer‘s Square-100mm
Engineer‘s Scriber 190mm
702-21MFeeler Gauge Set
403Hacksaw
8000-A2Circlip Pliers
8000-J2Circlip Pliers
8132-200 JCTelephone Pliers
8250-200 JCCombination Pliers
8316-200 JCSide Cutters
145-10CUniversal Pliers
137-250Grip Pliers
Oil Can-300
1993-Z94Reversible Ratchet
1985Feeler Gauge Set
1987Speed Brace
1990-125, 250Extensions
1995Universal Joint
50-20,8mmSpark Plug Socket
54-16mmSpark Plug Socket
Optional Extras
Code No. 0
668036 Mechanic’s Toolkit 41.50
d
199
AUTOMOTIVE ELECTRICIAN‘STOOLKIT
Code No. 0
668028 Automotive Electrician’s Toolkit 35.50
b
d
95-300 Flat Chisel Code: 86993700 0.40095-200 Flat ChiselCode: 86989900 0.400Junior HacksawCode: 30120000 0.100134-250 Grip PliersCode: 7459950 0.570R94420021 VernierCode: 33014300 0.3209534-05 Tape MeasureCode: 33014280 0.2001985 Speed BraceCode: 6143350 0.58550-20.8mm Spark Plug SocketCode: 6366140 0.11954-16mm Spark Plug SocketCode: 6366220 0.096702-21M Feeler Gauge SetCode: 65479500 0.070D19HMZ Socket SetCode: 6146100 1.9310pc Drill Bit SetCode: 01200000 0.510
1410 Tool Chest
1B Combination Spanners-6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22R49003046-46 Piece 1/4” Socket Set
Tube Spanner Set-8x9, 10x11, 12x13, 14x15, 16x17, 18x19
26-RS2 To be used with Tube Spanner Set
42-88M Allen Keys Set-2, 2.5, 3, 4, 5, 6, 8, 10
42-88P Allen Keys Set-3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”, 3/8”
2160PH1 PH2
21504 5.5 6.5 8
116Pin Punch Set
100-10, 16Centre Punches
8601-700Ball Pein Hammer
267-40Recoil Free Hammer
Circuit Tester
8132-160 JCTelephone Pliers
8250-200 JCCombination Pliers
8316-160 JCSide Cutters
8132AB-160 TLTelephone Pliers
145-10CUniversal Pliers
62P 200Adjustable Wrench
Heavy Duty Crimping Pliers
8516-250Tin Snips
Wire Stripper
Digital Multimeter
Stainless Steel Ruler-300
R93210000Heavy-Duty Utility Knife
403Hacksaw
Safety Glasses
Engineer‘s Scriber
Box Wrench Set-8 Piece
Needle File Set-6 Piece
Optional Extras
200
APPRENTICE TOOLKITS
ELECTRICIAN‘S & REFRIGERATIONMECHANIC‘STOOLKIT
Code No. 0
668001 Electrician’s & Refrigeration Mechanic’s Toolkit
38.50
95-200 Flat ChiselCode: 86989900 0.400Engineer‘s SquareCode: 01102000 0.133R94100051 Spirit LevelCode: 33014220 0.170227-350 Pipe WrenchCode: 6453460 1.62R94420021 VernierCode: 33014300 0.320R9455-05 Tape MeasureCode: 33014280 0.2008000-A2 Circlip PliersCode: 67015400 0.1678000-J2 Circlip PliersCode: 67034000 0.146
1410 Tool Chest
1B Combination Spanners-6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22R49003046-46 Piece 1/4” Socket Set
D19HMZ Socket Set
42-88M Allen Keys Set-2, 2.5, 3, 4, 5, 6, 8, 10
42-88P Allen Keys Set-3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”, 3/8”
2160PH1 PH2
21504 5.5 6.5 8
116Pin Punch Set
100-16Centre Punches
Flat File-250
Round File-250
Half-Round File-250
8132-200 JCTelephone Pliers
8250-200 JCCombination Pliers
8316-200 JCSide Cutters
8601-100, 700Ball Pein Hammers
248-STRecoil Free Hammer
145-10CUniversal Pliers
62P 200, 300Adjustable Wrenches
Heavy Duty Crimping Pliers
Wire Stripper
Digital Multimeter
Stainless Steel Ruler-300
R93210000Heavy-Duty Utility Knife
403Hacksaw
Safety Glasses
Engineer‘s Scriber
Box Wrench Set-8 Piece
137-250Grip Pliers
Optional Extras
Circuit Tester
95-100Flat Chisel
b
d
201
APPRENTICE TRUNKTOOLKIT
Code No. 0
668109 Apprentice Trunk Toolkit 48.63
1460 Tool Trunk
1B 6 ,7, 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 32, 34, 36
1B 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 7/8, 15/16, 1, 1.1/16, 1.1/8, 1.3/16, 1.1/4
8250-200 JCCombination Pliers
8132-200 JCTelephone Pliers
8316-200 JCSide Cutters
8000-A2Circlip Pliers
8000-J2Circlip Pliers
137-250Grip Pliers
145-10CUniversal Pliers
116Pin Punch Set
100-16Centre Punches
Flat File-250
4550-20Torque Wrench
403Hacksaw
8601-100Ball Pein Hammers
D32-EMZ3/4“ Socket Set
2160PH1 PH2
21506.5 3-150 4-150 6.5-200
42KL-9M1,5 2 2,5 3 4 5 6 8 10
702-21MFeeler Gauge Set
D306 7 8 9 10 11 12 13 14 15 16 17 18 19 21 223081L-Handle
3090 Extension125mm
3093Z-94Ratchet
1993Z-94Reversible Ratchet
D19 Sockets 8, 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 22, 23, 24, 26, 27, 28, 30, 32
1997-450Power Bar
1987Sliding T-Bar
1990 Extensions125, 250mm
d
c
e
3/4“ Socket Set
› 4x Sliding trays with high-density foam inserts.
202
APPRENTICE TOOLKITSCUSTOMISED
GEDORE INDIVIDUAL
PRECISE – CUSTOMISED
High-density foam
Plastic references
Why not create your perfect tool assortment to match your
corporate design requests and your process speci� cations.
We look forward to hearing from you!
All assortments are packed in high-density foam inserts or
plastic references and will � t into an appropriate
compartment of the GEDORE tool chests, trolleys or
toolboxes.
Minimum quantities apply.
203
Tidy, uncluttered look and always easily accessible
› Ready to be used straight after delivery: simply unpack and screw on the handle.
› Whether for mobile use or stationary, every tool has its place.
› Modular arrangement systems make daily routine that much easier (no more
scratching for tools).
› Compact tool assortments make for easy tool selection.
› Customised equipment/tool sets in module systems and/or trolleys/benches in
company design/colours.
ADVANTAGES:
› Easy assessment of what tools to buy.
› Spend less time ‘looking for tools’.
› Tidier workplace.
› Easy identi� cation and easy access of the correct tool.
› Easily check whether the toolset is complete.
› Elimination of unnecessary tool purchases – no surplus
tool accumulation.
Custom colour choices
ARTISAN‘S
TOOLKITS
ELECTRICIANS LIGHT CURRENT 206
GENERAL ARTISAN‘S
209
ELECTRICIANS MEDIUM CURRENT 207
TECHNICIAN‘S RUCKSACK
210
FARMER‘S
208
ELECTRICIAN‘S
211
206
ARTISAN TOOLKITS
ELECTRICIAN‘S LIGHT CURRENTTOOLKIT
Code No. 0
668110 Electrician’s Light Current Toolkit32.20
1410 Tool Chest
1B Combination Spanners-6, 7, 8, 9, 10, 11, 12, 13
62P 150Adjustable Wrench
42-88M Allen Keys Set-2, 2.5, 3, 4, 5, 6, 7, 8, 9, 10
60CP-250Adjustable Wrench
21506.5 3-150 4-150 6.5-200
2160PH1 PH2
145-10CUniversal Pliers
Junior Hacksaw
137-250Grip Pliers
8133-180 JCTelephone Pliers
8250-200 JCCombination Pliers
8316-160 JCSide Cutters
Universal Panel Key
Digital Multimeter
Wire Stripper
8601-500
R9455-05 Tape Measure
403Hacksaw
R95300017LED Torch
R9321Utility Knife
207
ELECTRICIAN‘S MEDIUM CURRENTTOOLKIT
1410 Tool Chest
1B Combination Spanners-6, 7, 8, 9, 10, 11, 12, 13
62P 150, 300mm Adjustable Wrenches
42-88M Allen Keys Set-2, 2.5, 3, 4, 5, 6, 8, 10
Circuit Voltage Tester
VDE 2133 Nut Drivers6, 7, 8, 9, 10, 11, 12, 13
VDE 2160PH1 PH2
VDE 2170 3.5 4 5.5 6.5
145-10CUniversal Pliers
Junior Hacksaw
137-250Grip Pliers
VDE 8132-160 HTelephone Pliers
VDE 8250-200 HCombination Pliers
VDE 8314-140 HSide Pliers
Universal Panel Key
Digital Multimeter
Wire Stripper
8601-500Ball Pein Hammer
R9455-05Tape Measure
403Hacksaw
R95300017LED Torch
VDE 4522Cable Knife
Heavy-Duty Crimping Pliers
D19HMZSocket Set
Code No. 0
668113 Electrician’s Medium Current Toolkit32.20
208
ARTISAN TOOLKITS
1335 Tool Box
1B Combination Spanners-6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 2462P 300Adjsutable Wrench
42-88M Allen Keys Set-2, 2.5, 3, 4, 5, 6, 7, 8, 9, 10
403Hacksaw
21504 5.5 6.5 8
2160PH1 PH2
145-10CUniversal Pliers
Junior Hacksaw
137-250Grip Pliers
8132-200 JCTelephone Pliers
8250-200 JCCombination Pliers
8316-200 JCSide Cutters
Leather Gloves
Digital Multimeter
8531-250Tin Snips
8601-900Ball Pein Hammer
R9455-05Tape Measure
Yale Padlock
R95300017LED Torch
Fencing Pliers 8260-300
Flat File-250
Round File-250
Half-Round File-250
50-20.8Spark Plug Socket
95-250Flat Chisel
702-20MFeeler Gauge Set
38-500Tyre Lever
106Chisel and Punch Set
C19TMZ Socket Set 1/2“
R9321Utility Knife
227-350Pipe Wrench
FARMER‘STOOLKIT
Code No. 0
668111 Farmer’s Toolkit32.40
209
1410 Tool Chest
1B Combination Spanners-6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 2462P 300Adjustable Wrench
42-88M Allen Keys Set-2, 2.5, 3, 4, 5, 6, 8, 10
8133-180 JCTriple Pliers
21504 5.5 6.5 8
2160PH1 PH2
145-10CUniversal Pliers
403Hacksaw
137-250Grip Pliers
8132-200 JCTelephone Pliers
8250-200 JCCombination Pliers
8316-200 JCSide Cutters
Flat File-250
Round File-250
Half-Round File-250
8601-700Ball Pein Hammers
R9455-05Tape Measure
267-40Recoil Free Hammer
R95300017LED Torch
8531-250Tin Snips
50-20.8Spark Plug Socket
C19HMZ Socket Set 1/2“
227-350Pipe Wrench
R9321Utility Knife
Stainless Steel Ruler-300mm
Engineer‘s Scriber
Safety Glasses
Engineer‘s Square
116Pin Punch Set
R49003046-46 Piece 1/4” Socket Set
Vernier
95-250Flat Chisel
100-16Centre Punch
GENERAL ARTISAN‘STOOLKIT
Code No. 0
668112 General Artisan’s Toolkit42.0
210
ARTISAN TOOLKITS
TECHNICIAN‘S RUCKSACKTOOLKIT
Code No. 0
668120 Technician’s Rucksack Toolkit8.61
Gedore Rucksack
No.6 Open-Ended Spanners-6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x2262P-200Adjustable Wrench
42-7M Allen Keys Set-2, 2.5, 3, 4, 5, 6, 8
21506.5 3-150 4-150 6.5-200
2160PH1 PH2
145-10CUniversal Pliers
Leather Gloves
8250-200 JCCombination Pliers
8316-200 JCSide Cutters
R9321Utility Knife
SRC-C19Z-10 Socket Set 1/2“
R95300017LED Torch
8601-500Ball Pein Hammer
211
VDE 8132-200 HTelephone Pliers
VDE 8250-200 HCombination Pliers
VDE 8314-160 HSide Cutters
VDE 8098-160 HStripping Pliers
8601-300Ball Pein Hammer
R9455-05Tape Measure
R95300017LED Torch
VDE 4522Cable Knife
VDE 2133 Nut Drivers4 6 8 10 13
ELECTRICIAN‘STOOLSET
Code No. 0
668122 Electrician’s Toolset6.1
Electrician‘s Toolcase
1B Combination Spanners-8, 10, 13, 17, 19
42-88M Allen Keys Set-2, 2.5, 3, 4, 5, 6, 8, 10
Digital Multimeter
VDE 2160PH1 PH2 PH3
VDE 2170 4 5.5 6.5
145-10CUniversal Pliers
137-175Grip Pliers
62PAdjustable Wrench
OPTION 11 STAND MERCHANDISER
Merchandiser Concepts
1-2-3 MERCHANDISER STAND CONCEPTS
THE PICTURES SHOWN ON THIS PAGE ARE FOR ILLUSTRATION PURPOSES ONLY. ACTUAL PRODUCTS MAY VARY DEPENDING ON CUSTOMERS’ REQUIREMENTS.
No. Code Opening Order
1B-6mm 600040C 1
1B-7mm 600059C 1
1B-8mm 600067C 1
1B-9mm 600075C 1
1B-10mm 600083C 1
1B-11mm 600091C 1
1B-12mm 600105C 1
1B-13mm 600113C 1
1B-14mm 600121C 1
1B-15mm 600148C 1
1B-16mm 600156C 1
1B-17mm 600164C 1
1B-18mm 600172C 1
1B-19mm 600180C 1
1B-20mm 600199C 1
1B-21mm 600202C 1
1B-22mm 600210C 1
D19 8mm 613304C 1
D19 9mm 613312C 1
D19 10mm 613320C 1
D19 11mm 613339C 1
D19 12mm 613347C 1
D19 13mm 613355C 1
D19 14mm 613363C 1
D19 15mm 613371C 1
D19 16mm 613398C 1
D19 17mm 613401C 1
D19 18mm 613428C 1
D19 19mm 613436C 1
D19 20mm 613444C 1
D19 21mm 613452C 1
D19 22mm 613460C 1
42-88M 012104 1
1985 614335C 1
1987 614343C 1
1990/75mm 614378C 1
1990/125mm 614386C 1
1990/250mm 614394C 1
1993 Z/94 614459C 1
1995 614475C 1
1997/375 614491C 1
D19 HMZ 614610 1
36/1 6327320 1
62 / 200mm 636819 1
62 / 250mm 636827 1
137/250mm 640670 1
145 / 250mm 641200 1
225 / 250mm 645036 1
534 10mm 651206C 1
534 11mm 651214C 1
534 12mm 651222C 1
534 13mm 651230C 1
534 14mm 651249C 1
534 15mm 651257C 1
534 16mm 651265C 1
534 17mm 651273C 1
534 18mm 651516C 1
534 19mm 651281C 1
1282-C19-1BMZ-PL-6SD 679232 1
Code No. Opening order Code No. Opening order Code No. Opening order
214
MERCHANDISERS
1B-6mm 600040C 1
1B-7mm 600059C 1
1B-8mm 600067C 1
1B-9mm 600075C 1
1B-10mm 600083C 1
1B-11mm 600091C 1
1B-12mm 600105C 1
1B-13mm 600113C 1
1B-14mm 600121C 1
1B-15mm 600148C 1
1B-16mm 600156C 1
1B-17mm 600164C 1
1B-18mm 600172C 1
1B-19mm 600180C 1
1B-20mm 600199C 1
1B-21mm 600202C 1
1B-22mm 600210C 1
1B-23mm 600229C 1
1B-24mm 600237C 1
1B/04M 601152 1
1B/17M 601268 1
1B/26M 601276 1
D19 8mm 613304C 1
D19 9mm 613312C 1
D19 10mm 613320C 1
D19 11mm 613339C 1
D19 12mm 613347C 1
D19 13mm 613355C 1
D19 14mm 613363C 1
D19 15mm 613371C 1
D19 16mm 613398C 1
D19 17mm 613401C 1
D19 18mm 613428C 1
D19 19mm 613436C 1
D19 20mm 613444C 1
D19 21mm 613452C 1
D19 22mm 613460C 1
D19 23mm 613479C 1
D19 24mm 613487C 1
IN19 5mm 615315C 1
IN19 6mm 615323C 1
IN19 7mm 615331C 1
IN19 8mm 615358C 1
IN19 9mm 615366C 1
IN19 10mm 615374C 1
IN19 12mm 615382C 1
IN19 14mm 615390C 1
IN19 17mm 615404C 1
IN19 19mm 615412C 1
42-88M 6349051 1
42KL-9M 6351978 1
43TX-09 6360959 1
1985 614335C 1
1987 614343C 1
1990/75mm 614378C 1
1990/125mm 614386C 1
1990/250mm 614394C 1
1993 U-10T 614262C 1
1993 Z/94 614459C 1
1995 614475C 1
1997/375 614491C 1
1997/450 614556C 1
D19 HMZ 614610 1
D19 TMZ 614831 1
28 PU 622761 1
36/1 6327320 1
38/400mm 633267C 1
62 / 150mm 636800 1
62 / 200mm 636819 1
62 / 250mm 636827 1
62 / 300mm 636835 1
62 / 375mm 636843 1
62 / 450mm 636851C 1
137/250mm 640670 1
145 / 250mm 641200 1
2150-2160 PH-06 ELS 1482320 1
VDE 2160-2170 PH-06 1616048 1
2150-6.5 6679510C 1
2150-8.0 6679780C 1
2160 PH1 6683380C 1
2160 PH2 6683460C 1
2160 PH3 6683540C 1
2150 3-150 6680280C 1
2150 4-150 6680360C 1
2150 6.5-200 6680870C 1
2153 5.5 1482432C 1
2161 PH2 1531204C 1
225 / 250mm 645036 1
225 / 300mm 645044 1
534 10mm 651206C 1
534 11mm 651214C 1
534 12mm 651222C 1
534 13mm 651230C 1
534 14mm 651249C 1
534 15mm 651257C 1
534 16mm 651265C 1
534 17mm 651273C 1
534 18mm 651516C 1
534 19mm 651281C 1
1261 660876 1
MV-150mm 6500720 1
106 8725200 1
113 8753680 1
116A 8757670 1
4550 / 20 7601610 1
S8000 6701030 1
8132-200JC 6719670 1
8250-200JC 6707310 1
8316-200JC 6745080 1
S8003JC 6701110 1
8380-250TL 6752100 1
8531/250mm 675792 1
8531/300mm 675806 1
1282-C19-1BMZ-PL-6SD 679232 1
CONCEPT OPTION 2 2 STAND MERCHANDISERS
Code No. Opening order Code No. Opening order Code No. Opening order
215
1B 6mm 600040C 1
1B 7mm 600059C 1
1B 8mm 600067C 1
1B 9mm 600075C 1
1B 10mm 600083C 1
1B 11mm 600091C 1
1B 12mm 600105C 1
1B 13mm 600113C 1
1B 14mm 600121C 1
1B 15mm 600148C 1
1B 16mm 600156C 1
1B 17mm 600164C 1
1B 18mm 600172C 1
1B 19mm 600180C 1
1B 20mm 600199C 1
1B 21mm 600202C 1
1B 22mm 600210C 1
1B 23mm 600229C 1
1B 24mm 600237C 1
1B 25mm 600245C 1
1B 26mm 600253C 1
1B 27mm 600261C 1
1B 28mm 600288C 1
1B 29mm 600296C 1
1B 30mm 600318C 1
1B 32mm 600326C 1
1B / 04M 601152 1
1B / 17M 601268 1
1B / 26M 601276 1
D30 FMZ 623202 1
D19 8mm 613304C 1
D19 9mm 613312C 1
D19 10mm 613320C 1
D19 11mm 613339C 1
D19 12mm 613347C 1
D19 13mm 613355C 1
D19 14mm 613363C 1
D19 15mm 613371C 1
D19 16mm 613398C 1
D19 17mm 613401C 1
D19 18mm 613428C 1
D19 19mm 613436C 1
D19 20mm 613444C 1
D19 21mm 613452C 1
D19 22mm 613460C 1
D19 23mm 613479C 1
D19 24mm 613487C 1
D19 25mm 613495C 1
D19 26mm 613509C 1
D19 27mm 613517C 1
D19 28mm 613525C 1
D19 29mm 613533C 1
D19 30mm 613541C 1
D19 32mm 613576C 1
IN19 5mm 615315C 1
IN19 6mm 615323C 1
IN19 7mm 615331C 1
IN19 8mm 615358C 1
IN19 9mm 615366C 1
IN19 10mm 615374C 1
IN19 12mm 615382C 1
IN19 14mm 615390C 1
IN19 17mm 615404C 1
IN19 19mm 615412C 1
D19L 10mm 015705C 1
D19L 12mm 015706C 1
D19L 13mm 015701C 1
D19L 17mm 015703C 1
D19L 19mm 015704C 1
42 88M 6349051 1
42KL-9M 6351978 1
43TX-09 6360959 1
1985 614335C 1
1987 614343C 1
1990 / 75 614378C 1
1990 / 125 614386C 1
1990 / 250 614394C 1
1993U-10T 614262C 1
1993 Z/94 614459C 1
1995 614475C 1
1997 / 375 614491C 1
1997 / 450 614556C 1
D19 HMZ 614610 1
D19 TMZ 614831 1
SR-D19Z-10 616834 1
D32 EMZ 628026 1
KD 26R-6 621846 1
28 PU 622761 1
33 / 6S 96660 1
36 / 1 6327320 1
38 / 400 633267C 1
38 / 500 633283C 1
62 / 150mm 636800 1
62 / 200mm 636819 1
62 / 250mm 636827 1
62 / 300mm 636835 1
62 / 375mm 636843C 1
62 / 450mm 636851C 1
137 / 175 6406620 1
137 / 250 640670 1
145 / 250 6412000 1
2150-2160 PH-06 ELS 1482320 1
VDE 2160-2170 PH-06 1616048 1
2150-6.5 6679510C 1
2150-8.0 6679780C 1
2160 PH1 6683380C 1
2160 PH2 6683460C 1
2160 PH3 6683540C 1
2150 3-150 6680280C 1
2150 4-150 6680360C 1
2150 6.5-200 6680870C 1
2153 5.5 1482432C 1
2161 PH2 1531204C 1
225/250 645036 1
225/300 645044 1
225/350 645052 1
225/450 645060 1
225/600 645079 1
534 10mm 651206C 1
534 11mm 651214C 1
534 12mm 651222C 1
534 13mm 651230C 1
534 14mm 651249C 1
534 15mm 651257C 1
534 16mm 651265C 1
534 17mm 651273C 1
534 18mm 651516C 1
534 19mm 651281C 1
1261 660876 1
MV 150mm 6500720 1
106 8725200 1
113 8753680 1
116A 8757670 1
4550-20 760161 1
S 8000 6701030 1
8132 - 200 JC 6719670 1
8250 - 200 JC 6707310 1
8316 - 200 JC 6745080 1
S 8003 JC 6701110 1
8380 - 250 TL 6752100 1
8531 / 250 675792 1
8531 / 300 675806 1
1282-C19-1BMZ-PL6SD T/ASS 679232 1
1282-C19-1BMZ-10SD T/ASS 679135 1
1282-FM-C19-1BMZ-2PL T/ASS 679415 1
CONCEPT OPTION 3 3 STAND MERCHANDISERS
Code No. Opening orderCode No. Opening order Code No. Opening order Code No. Opening order
216
TECHNOLOGY AND SAFETY
Warranty
In terms of GEDORE’S warranty policy, all torque wrenches are covered by a lifetime guarantee against defective materials and workmanship. Provided that the tool has been correctly used for its intended purpose and allowances have been made for the wear and tear of moving parts, the torque wrench will be repaired free of charge.
The warranty does not cover torque wrenches which have been misused or which have experienced wear and tear through extensive use.
A warranty return will be assessed by our technical sta� and if the return falls outside of our warranty policy, the customer will be noti�ed and quoted for the repair.
Calibration
A standard calibration and the issue of a test certi�cate will be provided as standard practice on any repair conducted.
A SANAS calibration and the issue of a SANAS calibration certi�cate will be done on request at an additional nominal charge.
OUR TORQUE WRENCH SERVICE - QUALIFIED AND CUSTOMISED
Please note that the torque wrench is an item of measuring equipment.
We recommend › Calibration once a year (DIN EN ISO 6789:2003)
or after 5000 load cycles (DIN EN ISO 6789:2003)
Your advantage › Torque wrench o�ers measurement accuracy. › Free calibration service at GEDORE SA.
Regular calibration, adjustment and certification. Why is this so important?
› This us allows us to guarantee the precision and reliability of our torque tools in the long term. We attach a great deal of importance to this as your safety is of the utmost importance. › We o�er you the safety you require for everyday controlled tightening.
GEDORE - competent control at the highest level
217
S1 S2
S1 S2
WE TAKE YOUR HEALTH AND SAFETY SERIOUSLY.
Spanners
Tool trolley
To ensure that you use our tools safely, please familiarise youself with the following information.*
Tool chests
› Do not climb or step on to the tool chest. › Never store pointed or sharp items loosely in the tool chest. Scribers can be made safe by pushing a cork on to the
pointed ends. › To avoid injury keep your back straight and lift from your knees when attempting to lift the tool chest.
› Only use spanner sizes and pro�les which �t the bolt or nut head. › Do not use spanners as levers or as striking tools. › Select the spanner in accordance with the screwed connection. This applies particularly to screwed connections
with high torques. › Never extend the tool lever arm except when the tools are designed especially for this purpose, e.g. single ended
ring spanners. › Never hit a spanner with a hammer except when the tools have an area designed especially for this purpose, e.g.
slogging spanners. › Always apply the spanner at a right angle to the bolt axis. › Always pull the spanner towards you. Never push the spanner away from you. If for any reason you can only press
the spanner away from you, use your open hand to prevent injuring your knuckles. › Ring spanners transmit the forces more consistently. Ring spanners are therefore more suitable for large torques. › Apply open ended spanners in such a way that the angle of the jaw is facing in the direction
of rotation. › If a torque is required for the screwed connection, use a torque wrench. › Never work with damaged spanners or attempt to repair them, rather replace them.
› Read the operating instructions. › Open only one drawer at a time, when more than one drawer is open it increases the chance of the trolley
tipping over. › Always keep the heaviest tools in the lower (heavy) drawer. Storage in the top drawers increases the chance of
the trolley tipping over. › Take note of the permissible load capacity of each drawer and the total carrying capacity of the trolley. › Never store pointed or sharp items loosely in the tool chest. Scribers can be made safe by pushing a cork on to
the pointed ends. › Only move the trolley when all the drawers are closed and locked. › When the trolley is stationary always set the safety brake on the swivel castors to avoid movement.
* Furthermore, the relevant safety guidelines of various institutions apply, e.g. the guidelines of the trade associations, employers' instructions and the statutory speci�cations of the respective country.
› Always wear safety goggles for tasks involving chips or the possibility of parts splintering.
› Only use the hand tools for their intended purpose. › Never modify or tamper with tools. Exceptions: Professional regrinding of
chisels, scrapers, cutting tools as well as hammer edges. › Never work with damaged tools. Damaged tools must be replaced
immediately. › Handles must be free of oil and grease. › Depending on the task, protect your hands by wearing work gloves. › Work on live circuits may only be performed by quali�ed personnel using
suitable VDE tools. › Choose a safe surface to ensure stability. Wear safety shoes. › Wear the speci�ed ear protection when working in noisy environments.
General
› Always store the heaviest tools in the bottom (heavy duty) drawer. › When the bottom drawer is opened, the centre of gravity is relocated to a
safe range. › Storing heavy tools in the upper drawers relocates the centre of gravity
upwards. › When the drawer is opened, the centre of gravity is relocated to a critical
range. › This makes the tool trolley very susceptible to lateral forces. If the trolley is
exposed to lateral forces such as impact, it can overturn. › Always observe the load capacity for each drawer to ensure that
you always stay in the safe range.
› S 1 = tool trolley centre of gravity when the drawer is closed › S 2 = tool trolley centre of gravity when the drawer is opened › Red = critical range danger of overturning
Why should heavy tools be stored in the bottom drawer?
Screwdrivers
› Choose the screwdriver which is suitable for the respective bolt head pro�le. › Place the workpiece on a ledge or clamp it. This helps to avoid injuries incurred by sliding blades. › Avoid cuts by directing the requisite pressure for releasing or tightening
the bolt head away from your body. › Wear protective gloves when working with screwdrivers. › If the screwdriver is too long, do not under any circumstances shorten
the blade or handle. Choose a shorter screwdriver. › Do not use the screwdriver as a caulking or crushing tool. › Light hammer impact may only be applied for loosening screws using suitable screwdrivers with striking cap
or continuous blade. › If the bolt fails to loosen, use the GEDORE impact driver set
No. K 1900-013 to release the bolt without destroying it. › Insulated and tested screwdrivers must be used when working on electrical systems.
218
TECHNOLOGY AND SAFETY
> >
= >
VDE tools
› Work on electrically live equipment may only be carried out by trained electricians. › Only tools and safety equipment marked with the double triangle or bell 1000V symbol
may be used. › Before commencing any work, check the insulation for damage. › Damaged tools must not be used. › The regulations of the employers’ liability insurance associations and power supply companies must
be complied with. › GEDORE VDE tools are approved for work on live circuits at voltages up to 1000V AC and 1500V DC. › Tools must not be combined unless they are designed to be securely joined together.
Pullers
› Read the operating instructions. › Use only original spare parts and accessories for your GEDORE puller. Never use worn, modi�ed
or defective spare parts or accessories. › Wear goggles and protective clothing when working. For added safety, use the GEDORE safety
cover 5.10. › Before pulling, ensure that the legs are in contact with the part to be pulled and are �rmly
tightened so that the spindle operates centrally along the axis of the puller. › Attention! When using a puller, forces of up to several tons are generated. Take care to ensure
that the puller is correctly positioned and is vertical to the component being pulled. › Do not use electric or pneumatic power or percussion drivers.
Ratchets, tools and sockets
› Ratchets are suitable for quick loosening and tightening. › Avoid jerky movements with the ratchet, e.g. caused by hammer impact. › The square drive and the tool and socket square drive must be of the same size. › Select the drive size in accordance with the screwed connection. This applies particularly to screwed
connections with high torques. › Ensure that the ball engages properly in the ball catch. › Always pull the spanner towards you. Never push the spanner away from you. If for any reason you
can only press the spanner away from you, use your open hand to prevent injuring your knuckles. › Only use suitable sockets and connections for the impact driver. Use a safety pin and ring to secure
the connection between the socket, extension and machine. › When using reducers, the smaller drive's torque always applies. › Do not use ratchets as levers or as striking tools.
Torque tools
Pipe bending systemsCutting tools
Safety notes for striking tools
› Read the operating instructions. › Never use defective or worn pipe bending systems. › Replace defective or worn parts with original parts. › Use suitable systems and tools for bending. › Wear safety goggles, safety shoes and protective clothing. › Ensure stability of the pipe bending system during the bending process.
› Always set cutting tools down on a clearly visible place. Handles should always point towards you.
› Sharpen your cutting tools regularly. Blunt cutting tools represent a greater risk of injury than sharp ones. Blunt cutting tools require more force to be applied.
› Store cutting tools separately. This protects the blades and your �ngers. › Set shears down with their tips closed. This protects the blades and your �ngers.
Chisels › Wear safety glasses and safety gloves. › Before starting work, check that the chisel blade is sharp and the striking end is burr-free. The blades
must be properly wet-sharpened. › Select the appropriate type and size of chisel for the work to be carried out. › Hold the chisel with a �rm grip. › When working, keep your eyes on the chisel tip. › Wherever possible, use a chisel with hand guard. › Never use chisels on workpieces harder than 40 HRC. › Set safety guards in place to prevent splinters and chips posing a hazard for other people.
Centre punches, drifts and mortise chisels › These tools are subject to the same safety rules as chisels.
› Read the operating instructions. › Only use correctly calibrated torque wrenches. › Treat torque wrenches as measuring equipment. Store torque wrenches carefully. › Only use torque wrenches within the permissible torque range. › Stop tightening the bolt immediately once you feel and hear the click signal. › Apply the torque wrench at a right angle to the screwed connection. › Only use original end �ttings or accessories which �t the respective torque wrench. › Where possible, do not use any reducers. › Never loosen bolts using a torque wrench. › Never use the torque wrench as a hammer. › Slacken the torque wrench after completing work. › Never use defective or worn accessory parts. Replace defective or worn parts
with original parts. › Only use one hand on the handle of the torque wrench;
two-handed operation is only possible using DREMOMETER A - F.
219
Torque multipliers
› Read the operating instructions. › Wear safety goggles, safety shoes and protective clothing. › Always inspect the torque multiplier for damage before use. › Never use electric, pneumatic or battery operated torque multipliers or impact wrenches. › Never exceed the speci�ed maximum input torque. › Always use impact sockets in accordance with DIN 3129 or ISO 2725-2 and ISO 1174. › Always securely connect the reaction arm to the support bolt. › Never extend the impact socket or connector between bolt and torque multiplier. › Never use a universal or cardan joint. › Never hit the torque multiplier with a hammer. › Do not drop the torque multiplier. › Never use the torque multiplier if it has been dropped, used to strike other objects,
or if anything has fallen on it. › Always keep hands and �ngers away from the reaction arm. › Always select an anchor point (wall, another bolt) su�cient to withstand torque
reaction forces. Reaction torque equals output torque. › Never allow the gearbox to touch a wall or other object. › Never modify the reaction arm without consulting with the manufacturer.
Hammers
Safety notes
Work gloves
Safety goggles
Ear protection
Pliers
› Always wear safety glasses and safety gloves. › Use the hammer only for its intended purpose. › Never misuse the hammer as a lever. › Before starting work, check that the hammer head is securely attached to the shaft. › Select the appropriate size hammer for the work to be carried out. › Never hit two hammers together. › Never use steel hammers on workpieces harder than 46HRC. Use suitable plastic-faced
hammers for this. If in doubt, rather use a suitable plastic-faced hammer. › Avoid bouncing blows. › Use only the work faces of the hammer. Blows with the side face damage the non-hardened
hammer eye. This can loosen the grip of the shaft in the hammer head. › If a burr forms on the pein or face of the hammer head, this must be immediately removed.
Failure to do this can pose the risk of splintering when the hammer is in use. › Grip the hammer shaft as far away from the hammer head as possible. This improves the
impact e�ect and avoids vibrations. › Do not store hammers with wooden shafts in warm, dry environments. Wood is a natural
product. Dry, warm storage conditions can cause the shaft to lose moisture and shrink, so that the hammer shaft is no longer a tight �t in the hammer head.
› Do not store the wooden shaft in too damp conditions! Too much moisture causes the wooden shaft to swell up and damages the wooden �bres. This can result in the wooden shaft snapping behind the eye area.
› For engines with ignition coils integrated in the spark plug connector (coil-on-plug), use only spark plug sockets with retainer springs. (No. 50 - 59).
› Do not use magnetic spark plug spanners on coil-on-plug spark plugs. › This can result in control unit faults.
› Read the operating instructions. › Ensure that your work gloves are suitable for the respective task to be performed. › Examine your work gloves for damage before use. Damaged work gloves must be
replaced. › Only work using work gloves which �t your hands perfectly. › Store your work gloves in a clean and dry place.
› Read the operating instructions. › Ensure that your safety goggles are suitable for the respective task to be performed. › Examine your safety goggles for damage before use. Damaged safety goggles must
be replaced. › Store safety goggles in dry areas. Use the black plastic bag provided for this purpose.
This will help you to avoid scratches on the lenses. › Clean the lenses regularly under running water, not when dry. › Do not wear safety goggles on top of standard spectacles. Mechanical e�ects can be
transferred which may be dangerous.
› Read the operating instructions. › Ensure that your ear protection is suitable for the respective task to be performed. › Examine your ear protection for damage before use. Ear protection displaying damage
must be replaced. › Wear ear protection for the entire duration of your stay in noisy areas. › Store your ear protection in a clean and dry place. › Avoid impact against the earpieces. Otherwise, this can move the earpieces and lead
to a noise level which is harmful for your ears.
› Wear protective goggles when working with pliers. Ejected bits of wire and circlips not positioned correctly in the tip of the pliers pose a risk to your eyes.
› Check on the jaws for wear and tear. Worn jaws result in slipping and thus in accidents.
› The joint of the pliers should not to have any noticeable play. Exceptions are the sliding joints.
› When cutting wire, choose pliers that match the wire diameter and wire hardness. › Never use pliers as hammers. › Only insulated and tested pliers are to be used when working on electrical equipment. › Grip wrenches are only for brie�y �xing work pieces.
220
TECHNOLOGY AND SAFETY
b1
a1a2
b2
h
L
10°
15°
a
b2b1
L
15°
a
lwc
b
70
lw
c
b
a
W3
L3
W4
T1
T2
b d
c
e
a2a1
b d
c
e
a2a1
985
775475 400
480 x 67
480 x 137
480 x 207
480 x 67
480 x 137
480 x 207
480 x 67
480 x 137
480 x 207
985
775475 400
480 x 67
480 x 137
480 x 207
1100
985
1100
985
640585Hub
1625
1000
985
640
550400
<
c1
bc2b
e
d
cc cc
c
dd
d
d d
e e ee
ef
b b b b
130
100200
250
TIGHTENING / TEST TORQUE
Suggested bolt tightening torque in Nm (Newton metres) Wrench/spanner test torques in accordance with DIN ISO 1711-1 (minimum guaranteed values) Nm
These torque levels are guideline values for metric standard threads in accordance with DIN ISO 261 and head sizes in accordance with DIN EN ISO 4762, DIN EN ISO 4032, DIN EN ISO 4014, and DIN 931-2, 6912, 7984 and 7990. These produce a 90% utilisation of the bolt yield strength. The calculations are based on a friction coe� cient of 0.14 (new bolt) without any after treatment, (non-lubricated). Please note: in extreme cases, e.g. for bolts lubricated with MOS2 compound and with cadmium plated connecting elements on both sides, the tightening torque should be reduced by around 20 %.
No. 2, 2A, 2B
No. 1B, 308, 7
No. 4No. 6,
No. 1B, 7, 400
No. 25 No. 26 RNo. 626
No. 35 ANo. 35 BNo. 3112
No. 894No. 895
Tightening values for quality grade as per DIN 267
4.6 5.6 6.9 8.8 10.9 12.9
M 2 0,123 0,162 0,314 0,373 0,520 0,628 4 1,90
M 2,2 0,196 0,265 0,510 0,598 0,843 1,010 4,5* 2,64
M 2,5 0,284 0,373 0,726 0,863 1,206 1,451 5 11,5 3,55
M 3 0,441 0,588 1,128 1,344 1,883 2,256 5,5 14,4 4,64 14,4 2,32
M 3,5 0,677 0,902 1,736 2,060 2,893 3,481 6* 17,6 7,4 5,92 17,6 2,96
M 4 1,000 1,344 2,599 3,040 4,315 5,148 7 25,2 11,4 9,12 25,2 4,56
M 5 1,916 2,648 5,099 6,031 8,483 10,2008
9*34,545,4
16,623
13,318,4
34,545,4
34,545,4
6,659,20
M 6 3,432 4,511 8,728 10,300 14,710 17,652 10 58,1 31 24,8 58,1 58,1 58,1 12,4
M 7 5,590 7,453 14,220 17,162 24,517 28,43911
12*72,789,1
40,451,5
32,341,2
72,789,1
72,789,1
72,789,1
16,120,6
M 8 8,238 10,787 21,575 25,497 35,304 42,16813
14*107128
64,579,4
51,663,5
107128
107128
107128
25,831,7
M 10 16,67 21,575 42,168 50,014 70,608 85,3171516
17*
150175201
96,2115134
77,092,3107
150175201
150175201
150175201
38,546,153,5
M 12 28,44 38,246 73,550 87,279 122,60 147,1018
19*20*
230261294
160186215
128149172
230261294
230261294
230261294
64,074,586,0
M 14 45,11 60,801 116,70 138,30 194,20 235,4021
22*23*
330368408
247281319
198225255
330368408
330368408
330368408
99,0112127
M 16 69,63 93,163 178,5 210,80 299,10 357,9024
25*26*
451496544
359402449
287322359
451496544
451496544
451496544
143161179
M 18 95,12 127,50 245,20 289,3 411,90 490,3027
28*594647
499552
399442
594647
594647
594647
199221
M 20 135,3 180,45 384,10 411,90 578,60 696,30 30 760 670 536 760 760 760 268
M 22 182,4 245,16 470,70 559,00 784,50 941,4032*34
8841019
804951
643761
8841019
8841019
8841019
321381
M 24 230,5 308,91 598,20 711,00 1000 1196 36 1165 1117 894 1165 1165 1165 447
M 27 343,2 460,90 887,50 1049 1481 1775 41 1579 1442 1154 1579 1579 1579 577
M 30 465,8 622,72 1206 1422 2010 2403 46 2067 1816 1453 2067 2067 2067 726
M 33 632,5 848,30 1628 1932 2716 3266 50 2512 2145 1716 2512 2512 2512 858
M 36 814,0 1089 2099 2481 3491 4197 55 3140 2077 3140 3140 3140 1038
M 39 1059 1412 2716 3226 4531 5443 60 3849 2471 3849 3849 1235
M 42 1304 1746 3364 3991 5609 6727 65 4021 2900 4021 4021 1422
M 45 1638 2177 4207 4992 7012 8414 70 4658 3364 4658 4658 1618
M 48 1981 2638 5080 6021 8473 10150 75 5394 3862 5394 1765
M 52 2540 3393 6541 7747 10885 13092 80 6178 4394 6178 1912
M 56 3168 4227 8149 9650 13582 16279 85 6963 6963 2059
M 60 3932 5247 10101 11964 16867 20202 90 7845 7845 -
M 64 4737 6306 12160 14416 20300 24320 95 8336 8336 -
Note: In reference to the spanner test torque as per DIN ISO 1711-1 column, we explicitly point out that these are minimum guarantee values.
Bolts from M39 in quality grades 4.6, 5.6, 6.9, 8.8, 10.9 and 12.9 are not standardised.
* These sizes are not included in DIN ISO 272
221
b1
a1a2
b2
h
L
10°
15°
a
b2b1
L
15°
a
lwc
b
70
lw
c
b
a
W3
L3
W4
T1
T2
b d
c
e
a2a1
b d
c
e
a2a1
985
775475 400
480 x 67
480 x 137
480 x 207
480 x 67
480 x 137
480 x 207
480 x 67
480 x 137
480 x 207
985
775475 400
480 x 67
480 x 137
480 x 207
1100
985
1100
985
640585Hub
1625
1000
985
640
550400
<
c1
bc2b
e
d
cc cc
c
dd
d
d d
e e ee
ef
b b b b
130
100200
250
b1
a1a2
b2
h
L
10°
15°
a
b2b1
L
15°
a
lwc
b
70
lw
c
b
a
W3
L3
W4
T1
T2
b d
c
e
a2a1
b d
c
e
a2a1
985
775475 400
480 x 67
480 x 137
480 x 207
480 x 67
480 x 137
480 x 207
480 x 67
480 x 137
480 x 207
985
775475 400
480 x 67
480 x 137
480 x 207
1100
985
1100
985
640585Hub
1625
1000
985
640
550400
<
c1
bc2b
e
d
cc cc
c
dd
d
d d
e e ee
ef
b b b b
130
100200
250
b1
a1a2
b2
h
L
10°
15°
a
b2b1
L
15°
a
lwc
b
70
lw
c
b
a
W3
L3
W4
T1
T2
b d
c
e
a2a1
b d
c
e
a2a1
985
775475 400
480 x 67
480 x 137
480 x 207
480 x 67
480 x 137
480 x 207
480 x 67
480 x 137
480 x 207
985
775475 400
480 x 67
480 x 137
480 x 207
1100
985
1100
985
640585Hub
1625
1000
985
640
550400
<
c1
bc2b
e
d
cc cc
c
dd
d
d d
e e ee
ef
b b b b
130
100200
250
TIGHTENING / TEST TORQUE
Wrench/spanner test torques in accordance with DIN ISO 1711-1 (minimum guaranteed values) Nm
Test torques for tightening tools for hexagon socket head screws
With internal square as per DIN 3120 DIN EN ISO 4762
No. 42T, DT42
No. 42, 42EL
No. IN 34 With hexagon head as per DIN 7422
6,3 10 12,5 20 25 6,3 10 12,5 20 25
No. 20No.
D 20
No. 30No.
D 30
No. 19No.
D 19
No. 32No.
D 32
No. D 21
No. IN 20 No. IN30 No. IN 19 No. IN 32 No. IN 21
1/4“ 3/8“ 1/2“ 3/4“ 1“ 1/4“ 3/8“ 1/2“ 3/4“ 1“
M 2 4 10,4 1,5 0,82
M 2,2 4,5* 12,6 2 1,9 1,9
M 2,5 5 15,1
M 3 5,5 17,8 2,5 3,8 3,8
M 3,5 6* 20,6 23,2
M 4 7 26,8 33,2 3 6,6 6,6 6,6
M 5 89*
33,641,1
45,559,9
94,1119,2
4 16 16 16 16 16
M 6 10 49,1 76,7 147 5 30 30 30 30 30
M 7 1112*
57,867,0
96118
178212
M 8 1314*
68,668,6
141169
249288
67
5280
52 52 5278
5278
M 101516
17*
198225225
331377425
8
9
120
165
120 120 120 120
165
M 1218
19*20*
225225225
477531569
10
12
220
370
220
370
220 220
370
M 1421
22*23*
225225
569569569
569569
M 1624
25*26*
569569569
569583624
14 590 590 590 590
M 18 2728*
569569
665707
M 20 30 569 795 17 980 980 1000 1000 1000
M 22 32*34
569569
888984
M 24 36 1084 1677 19 1360 1360 1400 1400 1400
M 27 41 1353 1910
M 30 46 1569 2143 22 2110 2100 2100
M 33 50 1569 2329 24 2750 2700
M 36 55 1569 2562 27 3910
M 39 60 1569 2795 30 4000
M 42 65 2795 32 4000
M 45 70 2795
M 48 75 2795 36 4000
M 52 80 2795
M 56 85
M 60 90
M 64 95
Note: Hand tightening sockets are unsuited to use with impact drivers. Inappropriate use poses an accident risk.
The matching test torques are derived from the theoretical load capability of the connecting square drive.
222
TECHNOLOGY AND SAFETY
HEAD WIDTHS AND THREAD DIAMETERS
Nominal size DIN ISO 272
normal (large)
Thread diameter Ø Nominal size Nominal size Thread diameter Ø Nominal size
Metric as per DIN ISO 272
Metric for high-tensile bolted
structural joints as per EN 14399-4
Inch mm BS 916, 1083 Inch mm
3,2 (–)4 (–)
1,62
5 (–)5,5 (–)
2,53
5/32
3/16
0,1562
0,1875
3,97
4,76
8 BA 7 BA 6 BA
0,152 0,172 0,193
3,86 4,37 4,90
7 (–)8 (–)
45
7/32 1/4
0,2187 0,2500
5,56 6,35
5 BA 4 BA
1/16 W
0,220 0,248 0,256
5,59 6,30 6,90
10 (–)11 (–)
67
9/32
5/16
0,2812
0,3125
7,14
7,94
3 BA 3/32 W
2 BA
0,282 0,297 0,324
7,16 7,54 8,23
13 (–)16 (–)
810
11/32 3/8
13/32
0,3438 0,3750 0,4062
8,73 9,52
10,32
1/8 W 1 BA 0 BA
(3/16)
(7/32)
0,340 0,365 0,413
8,64 9,27
10,49
18 (21)21 (24)
22
1214
12
7/16
1/2
0,4375
0,5000
11,11
12,70
3/16 W
1/4 W
1/4
5/16
0,445
0,525
11,30
13,34
24 (27)27 (30)
1618 16
9/16 19/32
5/8
0,5625 0,5938 0,6250
14,29 15,08 15,88
5/16 W 3/8 0,600 15,24
30 (34)32
34 (36)
20
2220
11/16
3/4
0,6875
0,7500
17,46
19,053/8 W 7/16 0,710 18,03
36 (41)41 (46)
2427
2224
25/32 13/16
7/8
0,7812 0,8125 0,8750
19,84 20,64 22,22
7/16 W 1/2 0,820 20,83
46 (50)50 (55)
3033
2730 15/16
1.0,9375 1,0000
23,81 25,40
1/2 W
9/16
0,920
23,37
55 (60)60 (65)
3639 36
1.1/16 1,0625 26,99
9/16 W
5/8 W
5/8
(11/16)
1,010
1,100
25,65
27,94
65 70
4245
1.1/8 1.3/16 1.1/4
1,1250 1,1875 1,2500
28,58 30,16 31,75
11/16 W 3/4 1,200 30,48
7580
4852
1.5/16 1.3/8
1.7/16
1,3125 1,3750 1,4375
33,34 34,92 36,51
3/4 W 13/16 W
7/8 (15/16)
1,300 1,390
33,02 35,31
8590
5660
1.1/2 1.5/8
1.11/16
1,5000 1,6250 1,6875
38,10 41,28 42,86
7/8 W
1. W
1.
1.1/8
1,480
1,670
37,59
42,42
95100
6468
1.3/4 1.13/16
1.7/8
1,7500 1,8125 1,8750
44,45 46,04 47,62
1.1/8 W 1.1/4 1,860 47,24
105110
7276
2. 2.1/16 2.3/16
2,0000 2,0625 2,1875
50,80 52,39 55,56
1.1/4 W 1.3/8 2,050 52,07
115120
8085
2.1/4 2.3/8
2.7/16
2,2500 2,3750 2,4375
57,15 60,32 61,91
1.3/8 W
1.1/2 W
1.1/2
1.5/8
2,220
2,410
56,39
61,21
130 90 2.9/16 2.5/8 2.3/4
2,5625 2,3750 2,7500
65,09 66,68 69,85
1.5/8 W
1.3/4 W
1.3/4
2.
2,580
2,760
65,53
70,10
135 95 2.13/16 2.15/16
3
2,8125 2,9375 3,0000
71,44 74,61 76,20
(1.7/8W) 76,70
145 100 3.1/8 3.3/8 3.1/2
3,1250 3,3750 3,5000
79,38 85,72 88,90
2.1/4
2.1/2
3,150
3,550
80,01
90,17
150 105 3.3/4 3.7/8
3,7500 3,8750
95,25 98,42 2.3/4 3,890 98,81
155 110 4.1/8 4.1/4 4.1/2
4,1250 4,2500 4,5000
104,78 107,95 114,30
3.
3.1/4
4,180
4,530
106,17
115,06
165 115
4.5/8 4.7/8
5.
4,6250 4,8750 5,0000
117,48 123,82 127,00
3.1/2 4,850 123,19
170 120 5.1/4 5.3/8 5.5/8
5,2500 5,3750 5,6250
133,35 136,52 142,88
3.3/4
4.
5,180
5,550
131,57
140,97
180 125 5.3/4 6.
6.1/8
5,7500 6,0000 6,1250
146,05 152,40 155,58 4.1/2 6,380 162,05
185 130
200 140210 150
223
!
SPANNER SIZES TOLERANCE FOR BOLTS AND SOCKET WRENCHES
Nominal size/s in mm
Tolerance class 1 as per ISO 691 dimensions
Tolerance class 2a as per ISO 691 dimensions
min. max. min. max.
2 ≤s < 33 ≤s < 44 ≤s < 6
+ 0,02+ 0,02+ 0,02
+ 0,08+ 0,10+ 0,12
+ 0,02+ 0,02+ 0,02
+ 0,12+ 0,14+ 0,16
3 ≤s < 1010 ≤s < 1212 ≤s < 14
+ 0,03+ 0,04+ 0,04
+ 0,15+ 0,19+ 0,24
+ 0,03+ 0,04+ 0,04
+ 0,19+ 0,24+ 0,30
14 ≤s < 1717 ≤s < 1919 ≤s < 26
+ 0,05+ 0,05+ 0,06
+ 0,27+ 0,30+ 0,36
+ 0,05+ 0,05+ 0,06
+ 0,35+ 0,40+ 0,46
26 ≤s < 3333 ≤s < 5555 ≤s < 75
+ 0,08+ 0,10+ 0,12
+ 0,48+ 0,60+ 0,72
+ 0,08+ 0,10+ 0,12
+ 0,58+ 0,70+ 0,92
75 ≤s < 105105 ≤s < 150150 ≤s < 210
+ 0,15+ 0,20+ 0,25
+ 0,85+ 1,00+ 1,22
+ 0,15+ 0,20
-
+ 1,15+ 1,40
-
This tolerance class applies only to ring spanners or socket wrenches that have not been manufactured by material removal.
Spanner sizes in accordance with this international standard must be marked with:a) Spanner head size.b) Reference to the international standard, i.e. ISO 691.c) Nominal sizes in millimetres.d) Tolerance class 1 or 2.
Conversion tables Inch to decimal-inches and mm
in. dec.in. mm.01/641/323/64
00.0156250.031250.046875
00,39690,79381,1906
1/165/643/327/64
0.06250.0781250.093750.109375
1,58751,98442,38122,7781
1/89/645/3211/64
0.1250.1406250.156250.171875
3,17503,57193,96884,3656
3/1613/647/3215/64
0.18750.2031250.218750.234375
4,76255,15945,55625,9531
1/417/649/3219/62
0.250.2656250.281250.296875
6,35006,74697,14387,5406
5/1621/6411/3223/64
0.31250.3281250.343750.359375
7,93758,33448,73129,1281
3/825/6413/3227/64
0.3750.3906250.406250.421875
9,5250 9,921910,318810,7156
7/1629/6415/3231/64
0.43750.4531250.468750.484375
11,112511,509411,906212,3031
in. dec.in. mm.1/233/6417/3235/64
0.50.5156250.531250.546875
12,700013,096913,493813,8906
9/1637/6419/3239/64
0.56250.5781250.593750.609375
14,287514,684415,081215,4781
5/841/6421/3243/64
0.6250.6406250.656250.671875
15,875016,271916,668817,0656
11/1645/6423/3247/64
0.68750.7031250.718750.734375
17,462517,859418,256218,6531
3/449/6425/3251/62
0,750,7656250,781250,796875
19,050019,446919,843820,2406
13/1653/6427/3255/64
0,81250,8281250,843750,859375
20,637521,034421,431221,8281
7/857/6429/3259/64
0,875 0,8906250,906250,921875
22,2250 22,621923,018823,4156
15/1661/6431/3263/641
0,93750,9531250,968750,9843751
23,812524,209424,606225,003125,4000
224
TECHNOLOGY AND SAFETY
TORQUE CONVERSION TABLES
Conversion formula: Units to be converted x factor = corresponding unit
Example: Conversion of 5lbf·ft in cNm
Solution: 5 x 135.6 = 678cNm
ApplicationCorresponding unit
= mNm = cNm = Nm = ozf·in = lbf·in = lbf·ft = gf·cm = f·cm (kp·cm) = kgf·m (kp·m)
1 mN·m 1 0,1 0,001 0,142 0,009 0,0007 10,2 0,01 0,0001
1 cN·m 10 1 0,01 1,416 0,088 0,007 102 0,102 0,001
1 N·m 1000 100 1 141,6 8,851 0,738 10197 10,2 0,102
1 ozf·in 7,062 0,706 0,007 1 0,0625 0,005 72 0,072 0,0007
1 lbf·in 113 11,3 0,113 16 1 0,083 1152,1 1,152 0,0115
1 lbf·ft 1356 135,6 1,356 192 12 1 13826 13,83 0,138
1 gf·cm 0,098 0,01 0,0001 0,014 0,0009 0,00007 1 0,001 0,00001
1 kgf·cm (kp·cm) 98,07 9,807 0,098 13,89 0,868 0,072 1000 1 0,01
1 kgf·m (kp·m) 9807 980,7 9,807 1389 86,8 7,233 100000 100 1
Conversion from m in kgf·m (kp·m) 1N·m = 0,102 kgf·m
N·m 0 1 2 3 4 5 6 7 8 9
0 0,00 0,10 0,20 0,31 0,41 0,51 0,61 0,71 0,82 0,92
10 1,02 1,12 1,22 1,33 1,43 1,53 1,63 1,73 1,84 1,94
20 2,04 2,14 2,24 2,35 2,45 2,55 2,65 2,75 2,86 2,96
30 3,06 3,16 3,26 3,37 3,47 3,57 3,67 3,77 3,87 3,98
40 4,08 4,18 4,28 4,38 4,49 4,59 4,69 4,79 4,89 5,00
50 5,10 5,20 5,30 5,40 5,51 5,61 5,71 5,81 5,91 6,02
60 6,12 6,22 6,32 6,42 6,53 6,63 6,73 6,83 6,93 7,04
70 7,14 7,24 7,34 7,44 7,55 7,65 7,75 7,85 7,95 8,06
80 8,16 8,26 8,36 8,46 8,57 8,67 8,77 8,87 8,97 9,08
90 9,18 9,28 9,38 9,48 9,59 9,69 9,79 9,89 9,99 10,10
100 10,20 10,30 10,40 10,50 10,60 10,71 10,81 10,91 11,01 11,11
Conversion from kgf·m (kp·m) in Nm 1 kgf·m (kp·m) = 9,807 N·m
kgf·m(kp·m)0 1 2 3 4 5 6 7 8 9
0 0,00 9,81 19,61 29,42 39,23 49,03 58,84 68,65 78,45 88,26
10 98,07 107,87 117,68 127,49 137,29 147,10 156,91 166,71 176,52 186,33
20 196,13 205,94 215,75 225,55 235,36 245,17 254,97 264,78 274,59 284,39
30 294,20 304,01 313,81 323,62 333,43 343,23 w353,04 362,85 372,65 382,46
40 392,27 402,07 411,88 421,69 431,49 441,30 451,11 460,91 470,72 480,53
50 490,33 500,14 509,95 519,75 529,56 539,37 549,17 558,98 568,79 578,59
60 588,40 598,21 608,01 617,82 627,63 637,43 647,24 657,05 666,85 676,66
70 686,47 696,27 706,08 715,89 725,69 735,50 745,31 755,11 764,92 774,73
80 784,53 794,34 804,15 813,95 823,76 833,57 843,37 853,18 862,99 872,79
90 882,60 892,41 902,21 912,02 921,83 931,63 941,44 951,25 961,05 970,86
100 980,67 990,47 1000,28 1010,08 1019,89 1029,70 1039,50 1049,31 1059,12 1068,92
Conversion from N·m in Ibf·ft 1N·m=0,7376 lbf·f t
N·m 0 1 2 3 4 5 6 7 8 9
0 0,00 0,74 1,48 2,21 2,95 3,69 4,43 5,16 5,90 6,64
10 7,38 8,11 8,85 9,59 10,33 11,06 11,80 12,54 13,28 14,01
20 14,75 15,49 16,23 16,96 17,70 18,44 19,18 19,91 20,65 21,39
30 22,13 22,86 23,60 24,34 25,08 25,81 26,55 27,29 28,03 28,76
40 29,50 30,24 30,98 31,72 32,45 33,19 33,93 34,67 35,40 36,14
50 36,88 37,62 38,35 39,09 39,83 40,57 41,30 42,04 42,87 43,52
60 44,25 44,99 45,73 46,47 47,20 47,94 48,68 49,42 50,15 50,89
70 51,63 52,37 53,10 53,84 54,58 55,32 56,05 56,79 57,53 58,27
80 59,00 59,74 60,48 61,22 61,96 62,69 63,43 64,17 64,91 65,64
90 66,38 67,12 67,86 68,59 69,33 70,07 70,81 71,54 72,28 73,02
100 73,76 74,49 75,23 75,97 76,71 77,44 78,18 78,92 79,66 80,39
Conversion from Ibf·ft in N·m 1 lbf·f t = 1,356 N·m
Ibf·ft 0 1 2 3 4 5 6 7 8 9
0 0,00 1,36 2,71 4,07 5,42 6,78 8,13 9,49 10,85 12,20
10 13,56 14,91 16,27 17,63 18,98 20,34 21,69 23,05 24,40 25,76
20 27,12 28,47 29,83 31,18 32,54 33,90 35,25 36,61 37,96 39,32
30 40,67 42,03 43,39 44,74 46,10 47,45 48,81 50,16 51,52 52,88
40 54,23 55,59 56,94 58,30 59,66 61,01 62,37 63,72 65,08 66,43
50 67,79 69,15 70,50 71,86 73,21 74,57 75,93 77,28 78,64 79,99
60 81,35 82,70 84,06 85,42 86,77 88,13 89,48 90,84 92,20 93,55
70 94,91 96,26 97,62 98,97 100,33 101,69 103,04 104,40 105,75 107,11
80 108,46 109,82 111.18 112,53 113,89 115,24 116,60 117,96 119,31 120,67
90 122,02 123,38 124,73 126,09 127,45 128,80 130,16 131,51 132,87 134,23
100 135,58 136,94 138,29 139,65 141,00 142,36 143,72 145,07 146,43 147,78
Conversion from Nm in Ibf·in 1 N·m = 8,851 lbf·in
N·m 0 1 2 3 4 5 6 7 8 9
0 0,00 8,85 17,70 26,55 35,40 44,25 53,10 61,96 70,81 79,66
10 88,51 97,36 106,21 115,06 123,91 132,76 141,61 150,46 159,31 168,16
20 177,02 185,87 194,72 203,57 212,42 221,27 230,12 238,97 247,82 256,67
30 265,52 274,37 283,22 292,08 300,93 309,78 318,63 327,48 336,33 345,18
40 354,03 362,88 371,73 380,58 389,43 398,28 407,14 415,99 424,84 433,69
50 442,54 451,39 460,24 469,09 477,94 486,79 495,64 504,49 513,34 522,20
60 531,05 539,90 548,75 557,60 566.45 575,30 584,15 593,00 601,85 610,70
70 619,55 628,40 637,26 646,11 654,96 663,81 672,66 681,51 690,36 699,21
80 708,06 716,91 725,76 734,61 743,46 752,32 761,17 770,02 778,87 787,72
90 796,57 805,42 814,27 823,12 831,97 840,82 849,67 858,52 867,38 876,23
100 885,08 893,93 902,78 911,63 920,48 929,33 938,18 947,03 955,88 964,73
Conversion from Ibf·in in Nm 1 lbf·in = 0,113 N·m
Ibf·in 0 1 2 3 4 5 6 7 8 9
0 0,00 0,11 0,23 0,34 0,45 0,56 0,68 0,79 0,90 1,02
10 1,13 1,24 1,36 1,47 1,58 1,69 1,81 1,92 2,03 2,15
20 2,26 2,37 2,49 2,60 2,71 2,82 2,94 3,05 3,16 3,28
30 3,39 3,50 3,62 3,73 3,84 3,95 4,07 4,18 4,29 4,41
40 4,52 4,63 4,75 4,86 4,97 5,08 5,20 5,31 5,42 5,54
50 5,65 5,76 5,87 5,99 6,10 6,21 6,33 6,44 6,55 6,67
60 6,78 6,89 7,00 7,12 7,23 7,34 7,46 7,57 7,68 7,80
70 7,91 8,02 8,13 8,25 8,36 8,47 8,59 8,70 8,81 8,93
80 9,04 9,15 9,26 9,38 9,49 9,60 9,72 9,83 9,94 10,06
90 10,17 10,28 10,39 10,51 10,62 10,73 10,58 10,96 11,07 11,19
100 11,30 11,41 11,52 11,64 11,75 11,86 11,98 12,09 12,20 12,31
Torque conversion factorsRequired Units
225
Examples
Comparison table of Vickers-Brinell-Rockwell hardness and tensile strength
Important pre�x characters
Giga G 1.000.000.000 = 109
Mega M 1.000.000 = 106
Kilo k 1.000 = 103
Hecto H 100 = 102
Deca Da 10 = 101
Deci d 0,1 = 10-1
Centi c 0,01 = 10-2
Milli m 0,001 = 10-3
Micro µ 0,000001 = 10-6
Nano n 0,000000001 = 10-9
Conversion table, force and torque1 newton = 0,102 kp
= 9,81 N= 9,81 Nm
1 kilopond1 kilopond metre
Important SI units with conversions to old but still commonly used units
Length metre mMasa kilogramme Time second sForce newton N = m/s2 1 N = 0,102 kpTorque newton metre Nm 9,81 N·m = 1 kp·mEnergy (work) joule J = NmHeat quantity joule J 1 J = 0,239 calPower watt W = Nm/s 1 kW = 1,36 PS = 860 kcal/hPressure pascal Pa = N/m2 100 000 Pa = 1 bar = 10 mWSElectrical current ampere ATemperature kelvin K 1 K = 1 °C
Material propertiesDensity Expansion Melting point Modulus of elasticityg/cm3 1/°C °C N/mm
Aluminium 2,7 0,000024 660,1 72 000Lead 11,3 0,000029 327,3 16 000Iron (Steel) 7,86 0,000012 1540 210 000Gold 19,3 0,000014 1063 79 000Copper 8,9 0,000017 1083 126 000Zinc 7,1 0,000026 419 94 000Glass 2,2–2,9 0,000008 800–1500 68 000Air 0,0013 0,0036Wood 0,5–0,7 10 000
Plastics / synthetic materials: PS, 1,05 0,00008 3 400PP, 0,9 0,00018 1 200ABS 1,05 0,00010 2 500
Conversion table, mass and weight1 megagramme (Mg) = 1.000 kg = 10.000 hg = 100.000 dag = 1.000.000 g1 ton (to.) = 1.000 kg1 kilogramme (kg) = 10 hg = 100 dag = 1000 g1 hectogramme (hg) = 10 dag = 100 g1 decagramme (dag) = 10 g1 gramme (g) = 10 dg = 100 cg = 1000 mg1 decigramme (dg) = 10 cg = 100 mg1 centigramme (cg) = 10 mg1 miligramme (mg) = 1 mg
Example 1:Expansion of a steel body of 100mm in length at a temperature of 10°C. Lengthy expansion coe�cient x °C exp. = 100mm x 0,000012 x 10 = 0,012mm = 12µm
Example 2:Elastic expansion e = s/E. A body of 100mm in length made of ABS is stretched with s = 50N/mm2. e = 50N/mm2: 2500N/mm2 = 0.02. The expansion is: 10 mm x 0.02 = 2mm.
Example 3:Two steel plates with a total thickness of 20mm are pre-stressed by means of a screw connection of s = 50N/mm2: e = 50: 210000 = 0.00024. The compression in the surrounding area of the screw is 2 mm x 0.00024 = 0,0048mm = 5µm.
The elastic compression induces a continuous pre-tension of the screw connection. A properly tensed screw connection is sel�nhibiting.
Vickers hardness Brinell hardness Rockwell hardness Rockwell hardness Tensile strengthHV 30 HB 30 HRB HRC sB
N/mm2
80 80,7 36,4 – 270 85 85 42,4 – 290 90 90 47,4 – 310 95 95 52,0 – 320100 100 56,4 – 340105 105 60,0 – 360110 110 63,4 – 380115 115 66,4 – 390120 120 69,4 – 410125 125 72,0 – 420130 130 74,4 – 440135 135 76,4 – 460140 140 78,4 – 470145 145 80,4 – 490150 150 82,2 – 500155 155 83,8 – 520160 160 85,4 – 540165 165 86,8 – 550170 170 88,2 – 570175 175 89,6 – 590180 180 90,8 – 600185 185 91,8 – 620190 190 91,5 – 640195 195 94,0 – 660200 200 95,0 – 670205 205 95,8 – 680210 210 96,6 – 710215 215 97,4 – 720220 220 98,2 – 730225 225 99,0 – 750230 230 – 19,2 760235 235 – 20,2 780240 240 – 21,2 800245 245 – 22,1 820250 250 – 23,0 830255 255 – 23,8 850260 260 – 24,6 870265 265 – 25,4 880270 270 – 26,9 900275 275 – 27,1 920280 280 – 27,6 940285 285 – 28,3 950290 290 – 29,0 970295 295 – 29,6 990300 300 – 30,3 1010310 310 – 31,5 1040320 320 – 32,7 1080330 330 – 33,8 1110340 340 – 34,9 1140350 350 – 36,0 1170360 359 – 37,0 1200370 368 – 38,0 1230380 376 – 38,9 1260390 385 – 39,8 1290400 392 – 40,7 1320410 400 – 41,5 1350420 408 – 42,4 1380430 415 – 43,2 1410440 423 – 44,0 1430450 430 – 44,8 1460460 – – 45,6 (1490)470 – – 46,3 (1520)480 – – 47,0 (1550)490 – – 47,7 (1580)500 – – 48,3 (1600)510 – – 49,1 (1630)520 – – 49,7 (1660)530 – – 50,4 (1690)540 – – 51,0 (1710)550 – – 51,6 (1740)560 – – 52,2 (1770)570 – – 52,8 (1790)580 – – 53,3 (1820)590 – – 53,9 (1850)600 – – 54,4 (1870)610 – – 55,0 (1900)620 – – 55,5 (1930)630 – – 56,0 (1950)640 – – 56,5 (1980)650 – – 57,0 (2000)660 – – 57,5 (2030)670 – – 58,0 (2050)680 – – 58,5 (2080)690 – – 59,0 (2110)700 – – 59,5 (2130)720 – – 60,4 (2170)740 – – 61,2 (2220)760 – – 62,0 (2260)780 – – 62,8 (2300)800 – – 63,6 –820 – – 64,3 –840 – – 65,0 –860 – – 65,7 –880 – – 66,3 –900 – – 66,9 –920 – – 67,5 –940 – – 68,0 –
226
TECHNOLOGY AND SAFETYARTICLE INDEX
ARTICLE INDEXPageArticle No.
ARTICLE INDEXPageArticle No.
1.07/K ........................... Puller Set ....................................................................................185
1.15 ............................... Triple Grip Puller .......................................................................182
1.26 .............................. Nut Splitter - Hydraulic ..........................................................183
1.30 ............................... Internal Extractor .....................................................................183
1.31 ............................... Internal Extractor Set ..............................................................185
1.36 ............................... Support Brace ...........................................................................184
1.38 ............................... Separator Puller ........................................................................184
1.40 ............................... Bearing Separator ....................................................................184
1.67 ............................... Steering Wheel Puller .............................................................184
1.73 ............................... Ball Joint Puller .........................................................................184
1.75 ............................... Oil Filter Hook .............................................................................. 93
1.85 ............................... Bearing Installation Set ..........................................................185
100 ................................ Centre Punch .............................................................................130
106 ................................ Chisel & Punch Set ...................................................................131
108 ................................ UNI Hand Guard .......................................................................130
1001 .............................. Electricians VDE Toolset .........................................................140
1100-1.04 ................... Universal Puller Set .................................................................185
1101-001 ..................... Circlip Pliers Set .......................................................................... 84
1101-1.29/3K ............. Ball Bearing Extractor Set ......................................................185
1102-003 ..................... Pliers Set ........................................................................................ 84
113 ................................ Drift Punch Set ..........................................................................131
116 ................................ Pin Punch Set.............................................................................131
121 G ............................ Suction-Cup Lifter ....................................................................94
121 G-3 ........................ Suction-Cup Lifter .................................................................... 94
125 ................................ Piston Ring Clamp Band .......................................................... 95
126 ................................ Piston Ring Pliers ........................................................................ 95
126-060 ....................... Piston Ring Pliers ........................................................................ 95
1260 ............................. Toolbox - 3 Compartments ..................................................104
1261 ............................. Toolbox - 5 Compartments ..................................................104
128 ............................... Valve Spring Tensioner .............................................................95
1281 .............................. Toolbox - 5 Compartments - Aluminium.........................105
1281/1282 ................. Tool Assortments ............................................................107-116
1282/5.......................... Toolbox - 5 Compartments ..................................................104
132 ................................ Hose Clamp Pliers .....................................................................96
132 CLIC ...................... Hose Clamp Pliers ...................................................................... 96
133 ................................ Open Ended Slogging Spanner ........................................... 16
1335 ............................. Toolbox - 5 Compartments ..................................................105
134 ............................... Straight Jaw Grip Wrench ....................................................... 85
135 ................................ Brake Spring Pliers .....................................................................96
137 ................................ Grip Wrenches .............................................................................85
138 ................................ Welding Grip Pliers ....................................................................85
138 Y ............................. C-Grip Pliers ................................................................................. 85
139 ................................ Pry Bars .......................................................................................... 93
1401 .............................. PRO Cabinet & Tools ................................................................114
1401 .............................. Tool Cabinet ...............................................................................114
1401L ........................... Large Tool Cabinet ...................................................................115
1401L ........................... PRO Cabinet & Tools ................................................................115
1404 .............................. PRO Cabinet & Tools ................................................................116
1404 .............................. Tool Cabinet ...............................................................................116
1410 .............................. Artisan’s Tool Chest..................................................................119
142 ................................ Universal Pliers ............................................................................87
1425/3/5 ..................... Foam Inserts Spares ................................................................123
1425/27/HM .............. Modular Assortment ...............................................................123
1425/27/PL................. Modular Assortment ...............................................................123
1425/27/SD ............... Modular Assortment ...............................................................123
1425/27/SP ................ Modular Assortment ...............................................................123
1425/3.......................... Tool Chest ...................................................................................118
1425/3.......................... Workshop Tool Assortment ..................................................118
1425/41/D19 ............. Modular Tool Assortment .....................................................122
1425/41/IB ................. Modular Tool Assortment .....................................................122
1425/5.......................... Comprehensive Tool Assortment .......................................119
1425/5.......................... Tool Chest ...................................................................................119
143 ................................ Universal Pliers ............................................................................87
145 ................................ Waterpump Pliers ......................................................................87
1450S ........................... Tool Panel & Accessories .......................................................117
1460 .............................. Tool Trunk ..................................................................................106
1500 .............................. Metal Work Bench ....................................................................116
1500 .............................. Wooden Work Bench ..............................................................116
1502 ............................. Drawer Unit ................................................................................117
1510 ............................. Classic Tool Assortment .........................................................120
1510 ............................. Tool Trolley .................................................................................120
1525 ............................. Comprehensive ........................................................................121
1525 ............................. Tool Trolley .................................................................................121
1581 ............................. Tool Trolley .................................................................................122
1581 .............................. Classic Tool Assortment ........................................................122
165-171-06 ................. Electronic Screwdriver Set ......................................................66
165-TX-06 ................... Electronic Screwdriver Set ......................................................66
180 ................................ Cable Shears - Insulated ........................................................140
19 ................................... Boxes & Inserts ............................................................................46
32 ................................... Repair Kits .....................................................................................46
1930 .............................. Reducer 1/2” to 3/8” ..................................................................40
1932 .............................. Converter 1/2” to 3/4” ...............................................................40
1985 .............................. Speed Brace Handle 1/2” .........................................................40
1987 .............................. Sliding T-Bar 1/2” ........................................................................41
1990 ............................. Extension Bar 1/2” ......................................................................41
1990M ......................... Extension with Magnet 1/2” ...................................................41
1993 U-3...................... Reversible Ratchet 1/2” ............................................................35
1993 U-10K ................ Reversible Plastic Ratchet 1/2” .............................................35
1993 U-10T ................. Reversible Ratchet 1/2” ............................................................35
1993 Z-94 ................... Reversible Ratchet & Coupler 1/2” ....................................... 35
1994 ............................. Square Coupler 1/2” ..................................................................41
1995 ............................. Universal Joint 1/2” ....................................................................41
1996 ............................. Power Bar 1/2” .............................................................................40
1997 .............................. Power Bar 1/2” .............................................................................40
19L ................................ Extra Deep Socket (MM) (AF) .................................................37
1B .................................. Spanner Sets ...................................................................................7
227
ARTICLE INDEX
ARTICLE INDEXPageArticle No.
ARTICLE INDEXPageArticle No.
1B .................................. Spanners (AF) .................................................................................7
1B .................................. Spanners (MM) ...............................................................................6
2 ..................................... Ring Spanner Sets ...................................................................... 11
2 ..................................... Ring Spanners (MM) (AF)......................................................... 10
20 ................................... Socket (MM) 1/4” ........................................................................ 22
20L ................................ Socket Long Pattern 1/4” ......................................................... 22
2.20 .............................. Truck Workshop Kit .................................................................186
2.30 .............................. Industrial Puller Kit ..................................................................186
2.40 ............................... Construction Machine Puller Kit .........................................186
20 EAU-3 ..................... Socket Set 1/4” ............................................................................20
20 EMZ ........................ Socket Set 1/4” ............................................................................20
20 MDX ........................ Socket Set 1/4” ............................................................................20
20 NZA ........................ Socket Set 1/4” ............................................................................21
20 NZI .......................... Socket Set 1/4” ............................................................................21
2030 ............................. Converter 1/4” to 3/8” ...............................................................24
2087 .............................. Sliding T-Bar 1/4” ........................................................................23
2088 .............................. Flexible Extension 1/4” ............................................................. 24
2090 .............................. Extension 1/4” ............................................................................. 23
2093-U3 ...................... Reversible Ratchet 1/4” ............................................................ 21
2093-U10 ................... Reversible Ratchet 1/4” ............................................................ 21
2093-Z/94 .................. Reversible Ratchet 1/4” ............................................................ 22
2094 ............................. Coupler 1/4” ................................................................................. 23
2095 .............................. Universal Joint 1/4” ....................................................................24
2097 .............................. Swivel Handle 1/4” .....................................................................23
2098 .............................. Driving Handle 1/4” ...................................................................24
210 ................................ Chain Pipe Wrench .................................................................... 87
2132 .............................. Reducer 1“ to 3/4” AF ................................................................ 49
2133 .............................. 3C Nut Drivers .............................................................................67
2133 .............................. 3C Nut Driver Sets ...................................................................... 67
2150 .............................. 3C Screwdriver ...........................................................................63
2153 .............................. 3C Stubby Screwdriver............................................................. 64
2150-2160 PH............ 3C Screwdriver Sets ................................................................... 65
2160 PH ....................... 3C Screwdriver ............................................................................63
2160 PZ........................ 3C Screwdriver ............................................................................ 63
2161 PH ....................... 3C Stubby Screwdriver - Philip .............................................. 64
2163 TX........................ 3C Torx® Screwdrivers............................................................... 64
2163 TX........................ 3C Torx® Screwdriver Set ......................................................... 65
2187 .............................. Sliding T-Bar 1” ............................................................................48
2190 .............................. Extension Bar 1” .......................................................................... 49
2193 U-3...................... Reversible Ratchet .....................................................................47
2193-Z94..................... Reversible Ratchet ..................................................................... 47
2194 .............................. Square Coupler ...........................................................................49
2195 .............................. Universal Joint............................................................................. 49
220 ................................ Steel Pipe Cutter .........................................................................89
2200 .............................. Number Set ................................................................................131
2201 .............................. Letter Set .....................................................................................131
225 ................................ Pipe Wrench - Stillson Type ....................................................86
227 ................................ Pipe Wrench - American Pattern .......................................... 86
26 R ............................... Double Ended Box Spanners .................................................92
26 RS ............................. Stepped Tommy Bar ..................................................................92
248ST ........................... Recoil-free Hammer ................................................................130
27 ................................... Wheel Socket Wrench - Trucks .............................................. 92
28 PU ............................ 4-Way Wheel Wrench ................................................................92
29 I ................................ Construction Ratchet ..............................................................12
299 ................................ Drain Plug Spanner ...................................................................99
2A .................................. Heavy Duty Ring Spanner .......................................................12
2AR ............................... Extension Tube ...........................................................................12
3019 ............................. Converter 3/8” to 1/2” ...............................................................26
3020 ............................. Reducer 3/8” to 1/4” ..................................................................27
304 ................................ Half-Moon Ring Spanner Sets ...............................................11
304 ................................ Half-Moon Ring Spanners (MM) (AF) .................................. 11
306 ................................ Ring Slogging Spanners (MM) (AF) .................................... 16
3081 .............................. L-handle 3/8”................................................................................27
3087 .............................. Sliding T-bar 3/8” ........................................................................27
3090 .............................. Extension 3/8” .............................................................................27
3093-U3 ...................... Reversible Ratchet 3/8” ............................................................25
3093-Z/94 .................. Reversible Ratchet & Coupler 3/8” ....................................... 25
3094 ............................. Coupler 3/8” .................................................................................26
3095 ............................. Universal Joint 3/8” ....................................................................26
3096 ............................. Power Bar 3/8” .............................................................................27
3114 .............................. Crowfoot Spanner .....................................................................17
3219 .............................. Reducer 3/4” to 1/2” .................................................................46
3221 .............................. Converter 3/4” to 1” ...................................................................46
3287 .............................. Sliding T-bar 3/4” ........................................................................ 45
3290 .............................. Extension Bar 3/4” ......................................................................45
3293 DJ ........................ Repair Kit 3/4” ..............................................................................46
3293 U-1...................... Reversible Ratchet 3/4” ............................................................43
3293 U-1...................... Repair Kit 3/4” ..............................................................................46
3293 U-2...................... Reversible Ratchet 3/4” ............................................................43
3293 U-2...................... Repair Kit 3/4” ..............................................................................46
3293 Z .......................... Repair Kit 3/4” .............................................................................46
3293 Z/94 .................. Reversible Ratchet 3/4” ............................................................43
3293/500 .................... Double Johnny Ratchet 3/4” ..................................................44
3293/500-24x30 ....... Double Johnny Ratchet 3/4” ..................................................44
3294 ............................. Square Coupler 3/4” ..................................................................46
3295 .............................. Universal Joint 3/4” ....................................................................46
3296 .............................. Power Bar 3/4” .............................................................................45
3296 .............................. Repair Kit 3/4” ..............................................................................46
36 ................................... Oil Filter Strap Wrench .............................................................93
38 ................................... Tyre Lever ......................................................................................93
39 ................................... Tyre Lever ......................................................................................93
40 ................................... Hook Spanner .............................................................................17
400 ................................ Flare Nut Spanner (MM) (AF) .................................................13
4400 .............................. Flare Nut Spanner Set............................................................... 13
403 ................................ Hacksaw ........................................................................................98
40Z ................................ Pin Spanner ..................................................................................17
228
TECHNOLOGY AND SAFETYARTICLE INDEX
ARTICLE INDEX
PageArticle No.
ARTICLE INDEX
PageArticle No.
407 ................................ Hacksaw ........................................................................................ 98
4101 .............................. Torco�x SE - Torque Wrench .................................................147
4150 / 4151 ................ Torco�x FS - Torque Wrench .................................................147
42 ................................... Allen Key Sets ..............................................................................68
42 ................................... Allen Key (MM) (AF) ................................................................... 68
424 ................................ Tin Snips - Ideal Pattern ........................................................... 89
425 ................................ Tin Snips - Figure Pattern ........................................................ 89
42KL ............................. Ball Head Allen Key Set ............................................................69
42L ................................ Allen Key .......................................................................................69
42L ................................ Allen Key Sets .............................................................................. 68
42SCKL......................... Ball Head Allen Key Set ............................................................ 70
42SCL ........................... Allen Key Set ................................................................................ 69
42T ................................ Allen Key (MM) (AF) ...................................................................69
43KTX ........................... Ball Head Torx Key Set .............................................................. 70
43TV ............................. Torx Gauge Tester ......................................................................71
43TX ............................ Torx Allen Key .............................................................................. 70
43TX ............................. Torx Allen Key Set ......................................................................70
43TXL .......................... Long Torx Allen Key ................................................................... 71
43TXL ........................... Long Torx Allen Key Sets .........................................................71
44 ................................... Caliper Face Spanner ................................................................17
4530 .............................. Towrope ........................................................................................98
4549 .............................. Torco�x K - Torque Wrench ...................................................147
4550 .............................. Torco�x K - Torque Wrench ...................................................146
4611 .............................. Power Testing Screwdriver .....................................................66
5.10 ............................... Puller Safety Cover ..................................................................183
50 ................................... Spark Plug Socket ......................................................................93
5017 .............................. JAZZ Tool Assortment ............................................................101
502 ................................ Motorist Toolkit .........................................................................101
534 ................................ Swivel Wrench ............................................................................. 10
534 ................................ Swivel Wrench Sets ...................................................................10
54 ................................... Spark Plug Socket ......................................................................94
55 ................................... Spark Plug Spanner ...................................................................94
58 ................................... Spark Plug Spanner ...................................................................94
6 .................................... Open Ended Spanners ............................................................. 14
62 ................................... Adjustable Wrench ....................................................................15
620C ............................. Club Hammers ..........................................................................132
622C ............................. Copper Sledge Hammers ......................................................133
640S .............................. Sledge Hammers ......................................................................133
640 ................................ Magnetic Lifter ............................................................................ 95
642 SP .......................... Magnetic Lifter ............................................................................95
647 ................................ Spark Plug Brush ........................................................................ 94
687 ................................ Screwdriver Bits - Torx .............................................................. 75
690 ................................ Screwdriver Bits - PH .................................................................71
690 ................................ Screwdriver Bits - PZD ..............................................................71
7 ..................................... Combination Spanners ...............................................................8
7 ..................................... Combination Spanner Sets .......................................................8
702 ................................ Feeler Gauge Set - Fan Pattern ..............................................97
7112 ............................. Open End Fitting ......................................................................165
7118 ............................. Open End Fitting ......................................................................165
7212 ............................. Ring End Fitting ........................................................................165
7218 ............................. Ring End Fitting ........................................................................165
7412 ............................. Ratchet Head ............................................................................166
7418 ............................. Ratchet Head .............................................................................166
753 ................................ Dremometer - Mini Torque Wrench...................................155
754 ................................ Ratchet Head ............................................................................166
756 ................................ Torque Screwdriver .................................................................162
759 ............................... TSN Slipper Torque Wrench ..................................................156
760 .............................. Breaking Torque Wrench .......................................................159
761 ............................... TSP Slipper Torque Wrench ..................................................157
762 ............................... Slipping Torque Wrench ........................................................157
7R ................................. Ratchet Spanner Sets ..................................................................9
7R ................................. Ratchet Spanners ..........................................................................9
8000 - A0-A4 .............. Circlip Pliers - External Straight .............................................82
8000 - A01-A41 ......... Circlip Pliers - External Bent ...................................................82
8000 - A5 ..................... Circlip Pliers - External Straight .............................................82
8000 - A51 .................. Circlip Pliers - External Bent ...................................................82
8000 - J0-J4 ................ Circlip Pliers - Internal Straight.............................................. 83
8000 - J01-J41 ........... Circlip Pliers - Internal Bent ....................................................83
8000 - J5 ...................... Circlip Pliers - Internal Straight.............................................. 83
8000 - J51 ................... Circlip Pliers - Internal Bent ....................................................83
8112 ............................. Round Nose Pliers ......................................................................76
8120 .............................. Flat Nose Pliers ............................................................................76
8132 .............................. Telephone Pliers - Straight...................................................... 76
8132AB ........................ Telephone Pliers - Angled .......................................................76
8133 .............................. Multiple Pliers..............................................................................77
8135 ............................ Telephone Pliers .........................................................................76
8136 .............................. Mechanic’s Pliers ........................................................................77
8146 .............................. Wire Stripping Pliers .................................................................79
8147 .............................. Heavy Duty Cable Stripping Tool .........................................80
8148 ............................. Stripping Tool for Data Cable ................................................80
8178 ............................ Bolt Cutters ..................................................................................88
8178 ............................ Bolt Cutter Spares ......................................................................88
8200 .............................. Torque Angle Indicator ..........................................................155
8220 ............................. Universal Puller with Twin Grip ...........................................180
8250 ............................. Combination Pliers - Heavy Duty ......................................... 74
8260 .............................. Fencing Pliers ..............................................................................74
8276 ............................. Balance-Weight Pliers ...............................................................96
8301 / 8302 ............... Dial Measuring Torque Wrench ...........................................161
8316 ............................. Side Cutters - American Pattern ........................................... 75
8320 JL......................... Wire Rope Cutters ......................................................................79
8340 / 8340Z ............. Mini Bolt Cutters.........................................................................88
8380 .............................. Tower Pincers ..............................................................................75
8381 .............................. Pincers ............................................................................................75
8516 .............................. Tin Snips - Scissors Pattern .....................................................89
8531 .............................. Tin Snips - Straight Pattern .....................................................89
8551 .............................. Bolt Extractor Set .....................................................................184
229
ARTICLE INDEX
PageArticle No.
ARTICLE INDEX
PageArticle No.
8554 .............................. Dremometer Torque Wrench ...............................................152
8560 .............................. Dremometer Torque Wrench ...............................................152
8561 .............................. Dremometer Torque Wrench ...............................................152
8562 .............................. Puller - Twin Grip ......................................................................180
8562 .............................. Dremometer Torque Wrench ...............................................153
8563 .............................. Puller - Triple Grip ....................................................................180
8563 D & DR ............... Dremometer Torque Wrench ...............................................153
8564 ............................. Puller - Twin Grip ......................................................................181
8564 .............................. Dremometer Torque Wrench ...............................................154
8565 .............................. Puller - Triple Grip ....................................................................181
8566 .............................. Puller - Twin Grip ......................................................................181
8567 .............................. Puller - Triple Grip ....................................................................181
8568 .............................. Puller - Twin Grip .....................................................................181
8569 .............................. Puller - Triple Grip ....................................................................181
8570 .............................. Dremometer Torque Wrench ...............................................154
8571 .............................. Dremometer Torque Wrench ...............................................154
8572 .............................. Dremometer Torque Wrench ...............................................153
8573 .............................. Dremometer Torque Wrench ...............................................153
8600 .............................. Stud Extractor ...........................................................................183
8601 .............................. Ball Pein Hammer.....................................................................130
8612 ............................ Torque Calibration Analyser .................................................163
8612 ............................ Electronic Tester .......................................................................163
8612-3150 ................. Electronic Tester .......................................................................163
8801 .............................. Torque Wrench ..........................................................................160
907 ................................ Fender Protector ........................................................................99
95 ................................... Flat Cold Chisel .........................................................................130
95 HS ............................ Flat Cold Chisel & Hand Guard ............................................130
96 ................................... Cross-Cut Chisel........................................................................130
96 HS ............................ Cross-Cut Chisel & Hand Guard ..........................................130
99 ................................... Drift Punch .................................................................................131
AApprentice Toolkits ................................................................................................194-203
Artisan’s Toolkits. ......................................................................................................204-213
ATB SE Adjustable Breaking Torque Wrench...........................................................159
Automotive Electrician’s Toolkit ..................................................................................199
BBrass Pump Oil Can ............................................................................................................ 98
Breaker Torque Wrenches .....................................................................................158-160
CC19 ................................ Socket (MM) (AF) 1/2” ............................................................... 36
C19 ................................ Socket Sets .............................................................................28-34
C32 ................................ Socket (MM) (AF) 3/4” .............................................................. 44
C32 ................................ Socket Sets ................................................................................... 42
Capture Calibration Analyser ..............................................................................163-164
Car Workshop Puller Kit ..................................................................................................187
Club Hammers ..........................................................................................................132-133
Construction Machinery Toolkit .........................................................................196/197
DD19 ............................... Socket (MM) (AF) 1/2” ...............................................................36
D19 ............................... Socket Sets .............................................................................28-34
D19L ............................ Extra Deep Socket Bi-hexagon.............................................. 37
D21 ............................... Sockets 1” ......................................................................................48
D21 EMU ..................... Socket Set 1” ................................................................................47
D30 ............................... Socket (MM) (AF) 3/8” ...............................................................25
D30FMZ ....................... Socket Set 3/8” ............................................................................24
D30HMZ ...................... Socket Set 3/8” ............................................................................24
D32 ............................... Socket (MM) (AF) ........................................................................44
D32 ............................... Socket Sets .............................................................................42-43
DMK .............................. Dremaster Torque Wrench ....................................................149
DMSE ............................ Dremaster Torque Wrench ....................................................149
DT 2142-008 3C ........ Torx Screwdriver Set .................................................................65
DVI-20L/Z & 28L/Z ... Dremoplus Torque Multiplier .....................................172-173
DVV-13Z ..................... Dremoplus Torque Multiplier .....................................170-171
DVV-540RS ................ Dremoplus Torque Multiplier ..............................................177
DVV-40Z & 40ZRS .... Dremoplus Torque Multiplier ..............................................175
DVV-60-130ZRS ........ Dremoplus Torque Multiplier ..............................................176
EE 142 A/10 .................. Spares - Screw & Nut .................................................................87
E 143 A/10 .................. Spares - Screw & Nut .................................................................87
E 145 A/10 .................. Spares - Screw & Nut .................................................................87
E 210 A ......................... Spares - Chain..............................................................................87
E 210 B ......................... Spares - Pair of Jaws ..................................................................87
E 225 A ......................... Spares - Frame .............................................................................86
E 225 B ......................... Spares - Knurl ..............................................................................86
E 225 C ........................ Spares - Hook ..............................................................................86
E 225 D ....................... Spares - Pin ...................................................................................86
E 225 EF ...................... Spares - Rivet & Spring .............................................................86
E 227 A ........................ Spares - Spring ............................................................................86
E 227 B ......................... Spares - Knurl ..............................................................................86
E 227 C ......................... Spares - Jaw & Pin ......................................................................86
E 227 D ........................ Spares - Hook ..............................................................................86
E8000A ........................ Spares - Tips .................................................................................82
E8000J ......................... Spares - Tips .................................................................................83
E-8147 .......................... Spare Blade ..................................................................................80
E-8148 .......................... Spare Blade ..................................................................................80
E-8178 .......................... Replacement Cutting Head ....................................................88
Electrician’s Light Current Toolkit ...............................................................................206
Electrician’s Medium Current Toolkit .........................................................................207
Electrician’s & Refrigeration Mechanic’s Toolkit .....................................................200
Electrician’s Toolcase .......................................................................................................100
Electrician’s Toolset .................................................................................................141/211
230
TECHNOLOGY AND SAFETYARTICLE INDEX
ARTICLE INDEX
PageArticle No.
ARTICLE INDEX
PageArticle No.
Engineer’s Scriber ...............................................................................................................97
Engineer’s Square ...............................................................................................................97
EV 150/200 ................. Spares - Engineering Vice .....................................................117
EV150/200 .................. Engineering Vice ......................................................................117
FFarmer’s Toolkit .................................................................................................................208
GG-Clamps ...............................................................................................................................99
General Artisan’s Toolkit .................................................................................................209
GED0130 ..................... Non-Sparking Combination Spanners .............................190
GED0130 ..................... Non-Sparking Combination Spanners Sets ....................190
GED035 ....................... Non-Sparking Hexagon Sockets 1/2”................................191
GED0360 ..................... Non-Sparking Reversible Ratchet 1/2” .............................191
GED042 ....................... Non-Sparking Extensions 1/2” ............................................191
GED410 ....................... Non-Sparking Swivel Handles 1/2” ....................................191
GED0400 ..................... Non-Sparking Sliding T-Bar 1/2” .........................................192
GED0400 ..................... Non-Sparking Universal Joint 1/2” .....................................192
GED0430 ..................... Non-Sparking Socket Set 1/2” .............................................192
GED080 ....................... Non-Sparking Screwdriver Set ...........................................192
GED053 ....................... Non-Sparking Pipe Wrench ..................................................193
GED048 ....................... Non-Sparking Adjustable Wrenches .................................193
GED060 ....................... Non-Sparking Combination Pliers .....................................193
GED066 ....................... Non-Sparking Power Side Cutters .....................................193
HHSP ............................... Hydraulic Pressure Spindle ...................................................182
IIKS19 ............................ Allen Key Socket - Phillips & Pozzidriv Bits 1/2”............... 39
IKS20 ............................ Screwdriver Bit Socket 1/4” .................................................... 22
IKS20 PZD ................... Screwdriver Bit Socket 1/4” ....................................................23
IN19 .............................. Allen Key Socket (MM) (AF) 1/2” ...........................................37
IN19 .............................. Allen Key Socket Sets ............................................................... 33
IN19L ............................ Extra Long Allen Key Socket 1/2” .........................................38
IN20L ............................ Screwdriver Bit Socket 1/4” .................................................... 22
IN30 .............................. Allen Key Socket 3/8” ................................................................ 26
IN32 .............................. Allen Key Socket 3/4” ................................................................ 45
Industrial Puller Kit ...........................................................................................................187
INK19 ............................ Impact Allen Key Socket 1/2” .................................................53
INK21 ............................ Impact Allen Key Socket 1” ..................................................... 58
INK32 ............................ Impact Allen Key Socket 3/4” .................................................55
INR19L ......................... Allen Key Socket - Long Spline Ribe 1/2” ........................... 38
INX19 - INX19L .......... Allen Key Socket - Spline Bit 1/2” ......................................... 38
IS20 ............................... Screwdriver Bit Socket 1/4” ....................................................23
ITX19 ............................ Torx Allen Key Socket - Male 1/2” ......................................... 38
ITX19 ............................ Torx Allen Key Socket Set - Male 1/2” ................................. 34
ITX19B .......................... Torx Allen Key Socket - Male 1/2” .........................................39
ITX19L .......................... Long Torx Allen Key Socket - Male 1/2” .............................. 39
ITX20 ............................ Screwdriver Bit Socket 1/4” ....................................................23
ITX30 ............................ Torx Allen Key Socket - Male 3/8” .........................................26
ITX19/TX19 FMT ....... Torx Allen Key Socket Set - Male & Female ....................... 34
JJunior Hacksaw ...................................................................................................................98
KK19 ................................ Impact Sockets 1/2” ..................................................................53
K19 ................................ Impact Socket Set ......................................................................52
K1900 ........................... Impact Driver ...............................................................................54
K1900 ........................... Impact Driver Set .....................................................................52
K19L .............................. Impact Socket .............................................................................53
K21 ................................ Impact Socket .............................................................................57
K21L .............................. Impact Socket - Long Pattern ................................................57
K32 ................................ Impact Socket .............................................................................55
K32L .............................. Impact Socket .............................................................................55
K37 ................................ Impact Socket .............................................................................59
KB1932 ........................ Impact Socket Converter ........................................................53
KB1970/75 .................. Safety Rings & Pins ....................................................................54
KB1990 ........................ Impact Extension .....................................................................54
KB1995 ........................ Impact Universal Joint .............................................................54
KB2132 ........................ Impact Socket Reducer ............................................................58
KB2137 ........................ Impact Socket Converter ........................................................58
KB2170/75 .................. Safety Rings & Pins ....................................................................58
KB2190 ........................ Impact Extension .......................................................................58
KB2195 ........................ Impact Universal Joint .............................................................58
KB3219 ........................ Impact Socket Reducer ............................................................56
KB3221 ........................ Impact Socket Converter ........................................................56
KB3270/75 .................. Safety Rings & Pins ....................................................................56
KB3290 ........................ Impact Extension .......................................................................56
KB3295 ........................ Impact Universal Joint .............................................................56
KB3721 ........................ Impact Socket Reducer ............................................................59
KB3770/75 .................. Safety Rings & Pins ....................................................................59
KB3790 ........................ Impact Extension .......................................................................59
KD-26R ......................... Tubular Box Spanner Set .........................................................92
MMechanic’s Toolkit ............................................................................................................198
Merchandiser Concepts ........................................................................................214-217
MV 100/150 ............... Spares - Mechanic’s Vice .......................................................117
MV 100/150 ............... Mechanic’s Vice .........................................................................117
NNon-Spark Range ....................................................................................................188-193
231
ARTICLE INDEX
PageArticle No.
ARTICLE INDEX
PageArticle No.
PPegboard Accessories ....................................................................................................118
Precision Engineering Tools ............................................................................................97
RREF 10SD .................... 10 ScrewdriverAssortment ...................................................126
REF A ............................ C19/22 Assortment .................................................................124
REF B ............................. C19 Assortment ........................................................................124
REF C ............................ 1B Assortment ..........................................................................124
REF D ............................ C19/IN19 Assortment .............................................................124
REF E ............................. 1B/62H Assortment .................................................................125
REF F ............................. D19/ACC/SKT Assortment ....................................................125
REF G ............................ C32/6 Assortment ....................................................................125
REF H ............................ D19/22/ACC Assortment .......................................................125
REF I .............................. D19 Assortment .......................................................................125
REF J ............................. D19/IN19 Assortment ............................................................125
REF K ............................. D32/6 Assortment ...................................................................126
REF L ............................. PL/137/36 Assortment ...........................................................126
REF MF ......................... PL/81/82/83 3 Pliers Assortment ........................................126
REF M ........................... PL/81/82/83 3 Pliers Assortment ........................................126
REF N-10 ..................... 10 Screwdriver Assortment ..................................................126
REF O ........................... 6 Screwdriver Assortment ...................................................127
REF OF ......................... 6 Screwdriver Assortment ...................................................127
REF P ............................ 4 EXT - T/BAR Assortment .....................................................127
REF PF ......................... 4 Extension + T/Bar Assortment .........................................127
REF Q ........................... 4 ACC - Power Bar Assortment ...........................................127
REF QF.......................... 4 Acc+Power Bar Assortment ..............................................127
REF RF .......................... C19/Z94 Assortment...............................................................127
REF SF .......................... 1B/145 Assortment .................................................................127
REF VF ......................... Ph & Stubby Screwdriver Assortment ..............................126
REF WF ........................ Mec & Elec Screwdriver Assortment .................................126
RL-DVV13 .................... Reaction Arm .............................................................................171
RL-DVV-60-80 ............ Reaction Arm .............................................................................176
RL-DVI 20/28 .............. Reaction Arm .............................................................................173
RL-DVV40 ................... Reaction Arm .............................................................................175
SS8000 ........................... Circlip Pliers Set .......................................................................... 84
S8000 AE ..................... Circlip Pliers Set .......................................................................... 84
S8000 JE ...................... Circlip Pliers Set .......................................................................... 84
S8003 JC ..................... Pliers Set ........................................................................................78
S8140 A ....................... Crimping Pliers Set - Automotive ......................................... 81
S8140 D ....................... Crimping Pliers Set - Data Com............................................. 81
S8140 E ........................ Crimping Pliers Set - Electronics ........................................... 81
S8140 J ........................ Crimping Pliers Set - Industustrial ....................................... 81
S8303 JC ...................... Pliers Set ........................................................................................78
S8393 ........................... Pliers Set ........................................................................................78
Sortimo General Tool Assortment .............................................................................101
Safety Glasses & Bag ......................................................................................................98
Sledge Hammers ..............................................................................................................133
Steel Ruler .............................................................................................................................96
TTBN Breaking Torque Wrench ......................................................................................159
Technician’s Rucksack Toolkit .......................................................................................210
TLS PRO Preset Torque Screwdriver ...........................................................................162
Tool Bags & Rucksacks ....................................................................................................100
Tool Jacket ..........................................................................................................................100
Torque Screwdrivers ....................................................................................................162
TSC Slipper Torque Wrench ...........................................................................................157
TT3KH 350 ................. Torcotronic III Electronic Torque Wrench .........................160
TX19 ............................. Torx Socket - Female 1/2” ........................................................39
TX19 ............................. Torx Socket Set - Female 1/2” ................................................34
TX30 ............................. Torx Socket - Female 3/8” ........................................................26
TX4 ................................ Flat Ring Spanner .......................................................................11
VV 4614 PLUS .............. Voltage Tester ............................................................................140
VDE 2160 PH ............. Phillips Screwdriver .................................................................137
VDE 2170 ................... Electrician’s Screwdriver ........................................................137
VDE 2133 .................... Nut Driver ...................................................................................136
VDE 2133 .................... Nut Driver Set ............................................................................136
VDE 2E ......................... Single Ended Spanner ............................................................136
VDE 4507 .................... Torque Wrench ..........................................................................137
VDE 4522 .................... Cable Knife .................................................................................140
VDE 8098 H ................ Stripping Pliers..........................................................................138
VDE 8099 H ................ Stripping Pliers .........................................................................139
VDE 8120 H ................ Flat Nose Pliers .........................................................................139
VDE 8122 H ................ Round Nose Pliers ....................................................................139
VDE 8132 H ................ Telephone Pliers .......................................................................138
VDE 8132AB H ........... Telephone Pliers - Angled .....................................................139
VDE 8250 H ................ Combination Pliers ..................................................................138
VDE 8314 H ................ Side Cutters ................................................................................138
VDE 8316 H ................ Side Cutters - American Pattern .........................................138
VDE 894 ...................... Single Open Ended Spanner................................................136
VDE 2160-2170 ......... Screwdriver Set .........................................................................137
WarrantyIn terms of GEDORE’S warranty policy, all torque wrenches are covered by a lifetime guarantee against defective materials and workmanship. Provided that the tool has been correctly used for its intended purpose and allowances have been made for the wear and tear of moving parts, the torque wrench will be repaired free of charge.
The warranty does not cover torque wrenches which have been misused or which have experienced wear and tear through extensive use.
A warranty return will be assessed by our technical sta� and if the return falls outside of our war-ranty policy, the customer will be noti�ed and quoted for the repair.
CalibrationA standard calibration and the issue of a test certi�cate will be provided as standard practice on any repair conducted.
A SANAS calibration and the issue of a SANAS calibration certi�cate will be done on request at a nominal charge.
ObsolescencePlease note that while GEDORE uses its best endeavours to carry signi�cant stocks of spares to support its torque wrench product range, some spares for older discontinued items are no longer available. In such cases, repair of the torque wrench may not be possible.
“Our guarantee covers all tools against breakage under normal working conditions and is subject to fair wear and tear.”
At GEDORE we take pride in the quality of our products and services and we review all warranty claims with the aim of using the information gained for further product improvement.
Every GEDORE tool is covered by a lifetime guarantee against defective material and workmanship. Provided that the tool has been used correctly for its intended purpose and allowances have been made for wear and tear, this guarantee will allow for the repair or exchange of the tool.
While some deterioration through extensive use might be unavoidable, we will adopt a generous approach when viewing warranty claims. We do, however, set warranty limitations on wear and tear, obvious misuse, missing parts and purposely altered tools to protect ourselves against unreasonable claims.
Should the product fall outside the parameters of the warranty criteria, we will advise the customer on the repair or replacement cost of the article.
© Copyright by Gedore Tools SA (Pty) Ltd.
Gedore strives to be the leading supplier of superior quality tools in Africa and other designated markets.
We seek to build and maintain lasting relationships with customers by responsively o�ering suitable products at fair prices, which consistently conform to the highest level of product and service quality standards.
We strive to increase the value for all stakeholders and to be a preferred supplier, employer and customer.
Quality We strive to be the best that we can be in everything that we do.
Innovation and Knowledge We strive for continuous improvement in all aspects of our business through learning, benchmarking and having a general uneasiness with the status quo.
Responsiveness We have a bias for action by feeling a sense of urgency in everything that we do, and encourage employees to be proactive.
Team Work and Mutual Respect We encourage and support team participation, e�ective communication and mutual respect.
Motivation and People Centred We acknowledge that our employees are the key to our success.
We motivate employees by providing opportunities for advancement, sharing information, fair treatment, training, job security and workplace safety.
Customer Focused We expect all employees to maintain a customer focus in all aspects of their work.
Care for the EnvironmentWe are sensitive of the need to care for the environment and apply ourbusiness processes accordingly.
Corporate Governance We enforce good corporate governance by encouraging honesty, transparency, trust, equity and social responsibility.
DISCLAIMER
As we are constantly improving our products, we reserve the right to make changes as the need arises. The actual products delivered may therefore vary from those depicted in the catalogue.We do not provide any warranties in connection with technical and safety information provided in this catalogue. All customers are therefore advised to refer directly to their manufacturer’s speci�cations and the advice and standards of the relevant professional/trade associations. All products remain the property of Gedore Tools SA (Pty) Ltd until paid for in full.We cannot accept any liability for printing errors. Reproduction of any part of this catalogue requires the prior written permission of Gedore Tools SA (Pty) Ltd. All rights reserved worldwide.
GEDORE TOOLS SA
WARRANTY POLICY
TORQUE WRENCH WARRANTY &
CALIBRATION POLICY
MISSION STATEMENT
VALUE SYSTEM
TOTALRANGE
TO
TA
LR
AN
GE
20
20
20
20
ASHBURTON
DARGAVILLE
FRANKTON
GISBORNE
GORE
HASTINGS
HAWERA
INVERCARGILL
MORRINSVILLE
MT MAUNGANUI
NAPIER
NELSON
NEW PLYMOUTH
NORTH SHORE
OAMARU
PALMERSTON NORTH
PUKEKOHE
RANGIORA
ROTORUA
TAKAKA
TE AWAMUTU
TE RAPA
TIMARU
TOKOROA
WANGANUI
WESTPORT
(03) 308 3147
(09) 439 7335
(07) 847 4994
(06) 868 8214
(03) 208 4882
(06) 870 4450
(06) 278 4185
(03) 218 2059
(07) 889 7681
(07) 575 0504
(06) 842 2304
(03) 547 8000
(06) 758 5133
(09) 414 7214
(03) 434 6956
(06) 357 8888
(09) 238 1800
(03) 313 3425
(07) 347 9110
(03) 525 9847
(07) 871 7062
(07) 847 4994
(03) 684 7036
(07) 886 1700
(06) 344 4804
(03) 789 7033
TradeZone NZ Locations
ASHBURTON
TAKAKA
TOKOROA
MORRINSVILLEMT MAUNGANUI
NORTH SHORE
OAMARU
PUKEKOHE
RANGIORA
TE RAPAFRANKTON