THE KENYA GAZETTE - Kenya Bureau Of Standards (KEBS)
-
Upload
khangminh22 -
Category
Documents
-
view
2 -
download
0
Transcript of THE KENYA GAZETTE - Kenya Bureau Of Standards (KEBS)
NATIONAL COUNCIL FOR LAW REPORTING
LIBRARY
THE KENYA GAZETTE Published by Authority of the Republic of Kenya
(Registered as a Newspaper at the G.P.O.)
Vol. CXXIV —No. 87 NAIROBI, 13th May, 2022
Price Sh. 60
CONTENTS GAZETTE NOTICES
The State Corporations Act—Appointment
Taskforce on Re-Engineering and Transformation of Urban Development—Appointment
PASE
2520
2520
SUPPLEMENT Nos. 71,72 and 75
Legislative Supplements, 2022
LEGAL NOTICE No. PAGE
The Land Registration Act—Issue of Provisional 75 —The Universities Act—Charter for the Aga Khan Ceitificrites, etc 2521-2533 University, Kenya 417
The National Treasury—Statement of Actual Revenues 76—The Kenya Citizenship and Immigration Act—
and Net Exchequer Issues as at 28th February, 2022 2533-2534 Exemption 441
77 —The Public Order Act—The Public Order Abridged Financial Statements for the Year Ended 30th (Marsabit County) Order, No. 1 of 2022 443
June, 2020 2534-2539
The Standards Act—Declaration of Kenya Standards 2539-2561
County Governments Notices 2561-2564 SUPPLEMENT No. 73
The Companies Act—Dissolution, etc 2564-2566 National Assembly Bills, 2022
The Engineers Act—Corrigendum 2566 PAGE
The Insolvency Act—Winding Up, etc 2566-2568 The Public Procurement and Asset Disposal (Amendment) Bill, 2022 759
Thee Political Parties Act—Change of Political Party Officials, etc 2568
The Co-operative Societies Act—Admission of Claims 2568 SUPPLEMENT No. 74
The Environmental Management and Co-ordination Act— Acts, 2022 Environmental Impact Assessment Study Reports 2568-2570
PAGE Disposal of Uncollected Goods 2570-2571
Change of Names 2571-2573 The County Governmnets Additional Allocations Act,
2022 161
t2519
13th May, 2022
THE KENYA GAZETTE
2539
(4) Return on investment
There was growth in return on investment from Kes. 8.93 billion in June 2019 to Kes. 9.69 billion in June 2020. The growth is attributed to the good returns on fixed income counters at the Nairobi Securities Exchange.
RETURN ON INVESTMENT IN BILLIONS
15.91
2014 2015 2016 2017 2018 2019 2020
(5) Interest on member's balances
Section 2 of the NSSF Act, 2013 requires the fund to distribute the return earned to individual members accounts at such rates as the Board may, in consultation the Actuary or such other qualified person, determine and approve at least annually, having regard to the income on the Fund's assets. In the year ended June 2018, the Board of Trustees approved an interest of 7% based on actuarial valuation of the Fund carried out by Zamara Actuaries, Administrators and Consultants Limited.
(6) Message from the Board of Trustees.
The Statement of Net Assets and Statement of Changes in Net Assets are extracts from the Fund's audited financial statements approved by the Board of Trustees on 21st September, 2020. The Financial Statements have been audited by the Auditor-General in accordance with the provisions of the Article 229 of the Constitution of Kenya and section 35 of the Public Audit Act, 2015. A copy of the full set of financial statements is available and can be downloaded from NSSF website: www.nssfkenya.co.ke.
ANTHONY OMERIKWA (DR.), CEO/Managing Trustee.
MR/3215936
GAZETTE NOTICE No. 5475
THE STANDARDS ACT
(Cap. 496) DECLARATION OF KENYA STANDARDS
PURSUANT to section 9 (1) of the Standards Act, the National Standards Council declares the specifications or codes of practice appearing in the Schedule hereto, to be Kenya Standards, with effect from the date of publication of this notice. Number Title of Specification or Code of Practice
Food
KS 2128:2022 Kenya Standard—Tea industry—Code of practice, Fourth Edition
KS 2404:2022 Kenya Standard—Tea—Raw material for extraction—Specification, Second Edition
Agriculture
KS 2500:2022 Kenya Standard—Dairy cattle feed premix— Specification Second Edition
KS 2508:2022 Kenya Standard—Poultry feed premixes — Specification, Second Edition
KS 2957:2022 Kenya Standard—Compounded indigenous (Kienyeji) chicken feed—Specification, First Edition
Chemical
KS ISO 1170:2020 Kenya Standard—Coal and coke—Calculation of analyses to different bases, Second Edition
KS ISO 556:2020
Kenya Standard—Coke (greater than 20 mm in size)—determination of mechanical strength, Second Edition
KS ISO 622:2016 Kenya Standard—Solid mineral fuels—Determination of phosphorus content—Reduced molybdophosphate photometric method, Second Edition
GEN. (RTD) JULIUS W. KARANGI (DR.), Chairman, Board of Trustees.
KS ISO 1213-2:2016 Kenya Standard—Solid mineral fuels — Vocabulary —Part 2: Terms relating to sampling, testing and analysis, Second Edition
KS ISO 334:2020 Kenya Standard—Coal and coke— Determination of total sulfur—Eschka method, Second Edition
KS ISO 1013:2020 Kenya Standard—Coke—Determination of bulk density in a large container, Second Edition
KS ISO 540:2008 Kenya Standard—Hard coal and coke—Determination of ash fusibility, Second Edition
KS ISO 587:2020 Kenya Standard—Coal and coke— Determination of chlorine using Eschka mixture, Second Edition
KS ISO 925:2019
Kenya Standard—Solid mineral fuels— Determination of carbonate carbon content — Gravimetric method, Second Edition
KS ISO 15590-1:2018 Kenya Standard—Petroleum and natural gas industries—Induction bends, fittings and flanges for pipeline transportation systems—Part 1: Induction bends, Second Edition
KS ISO 15590-2:2021 Kenya Standard—Petroleum and natural gas industries—Factory bends, fittings and flanges for pipeline transportation systems—Part 2: Fittings, Second Edition
KS ISO 5163:2014 Kenya Standard—Petroleum products— Determination of knock characteristics of motor and aviation fuels—Motor method, Second Edition
KS ISO 5164:2014 Kenya Standard—Petroleum products— Determination of knock characteristics of motor fuels—Research method, Second Edition
KS ISO 5598:2020 Kenya Standard—Fluid power systems and components—Vocabulary, Second Edition
2540 THE KENYA GAZETTE 13th May, 2022
KS ISO 3016:2019 Kenya Standard—Petroleum and related products from natural or synthetic sources—Determination of pour point, Second Edition
KS ISO 8216-1:2017 Kenya Standard—Petroleum products—Fuels (class F) classification—Part 1: Categories of marine fuels, Second Edition
KS ISO 8217:2017 Kenya Standard—Petroleum products—Fuels (class F)—Specifications of marine fuels, Second Edition
KS ISO 12156-1:2018 Kenya Standard—Diesel fuel—Assessment of lubricity using the high-frequency reciprocating rig (HFRR)—Part 1: Test method, Second Edition
KS ISO 12156-2:2017 Kenya Standard—Diesel fuel—Assessment of lubricity using the high-frequency reciprocating rig (HFRR)—Part 2: Limit, Second Edition
KS ISO 12917-1:2017 Kenya Standard—Petroleum and liquid petroleum products — Calibration of horizontal cylindrical tanks—Part 1: Manual methods, Second Edition
KS ISO 13357-1:2017 Kenya Standard—Petroleum products—Determination of the filterability of lubricating oils—Part 1: Procedure for oils in the presence of water, Second Edition
KS ISO 13357-2:2017 Kenya Standard—Petroleum products—Determination of the filterability of lubricating oils—Part 2: Procedure for dry oils, Second Edition
KS ISO 20846:2019 Kenya Standard—Petroleum products—Determination of sulfur content of automotive fuels—Ultraviolet fluorescence method, Second Edition
KS ISO 2137:2020 Kenya Standard—Petroleum products and lubricants—Determination of cone penetration of lubricating greases and petrolatum, Second Edition
KS ISO 3015:2019 Kenya Standard—Petroleum and related products from natural or synthetic sources—Determination of cloud point, Second Edition
KS ISO 3104:2020 Kenya Standard—Petroleum products— Transparent and opaque liquids—Determination of kinematic viscosity and calculation of dynamic viscosity, Second Edition
KS ISO 3405:2019 Kenya Standard—Petroleum and related products from natural or synthetic sources—Determination of distillation characteristics at atmospheric pressure, Second Edition
KS ISO 3924:2019 Kenya Standard—Petroleum products— Determination of boiling range distribution—Gas chromatography method, Second Edition
KS ISO 4264:2018 Kenya Standard—Petroleum products— Calculation of cetane index of middle-distillate fuels by the four variable equation, Second Edition
KS ISO 5165:2020 Kenya Standard—Petroleum products— Determination of the ignition quality of diesel fuels —Cetane engine method, Second Edition
KS ISO 6246:2017 Kenya Standard—Petroleum products —Gum content of fuels —Jet evaporation method, Second Edition
KS ISO 384:2015 Kenya Standard—Laboratory glass and plastics ware—Principles of design and construction of volumetric instruments, Second Edition
KS ISO 4797:2015 Kenya Standard—Laboratory glassware—Boiling flasks with conical ground joints, Second Edition
KS ISO 4802-1:2016 Kenya Standard —Glassware — Hydrolytic resistance of the interior surfaces of glass containers—Part 1: Determination by titration method and classification, Second Edition
KS ISO 4802-2:2016 Kenya Standard — Glassware — Hydrolytic resistance of the interior surfaces of glass containers—Part 2: Determination by flame spectrometry and classification, Second Edition
KS ISO 6556:2012 Kenya Standard—Laboratory glassware—Filter flasks, Second Edition
KS ISO 4803:2021 Kenya Standard—Laboratory glassware — Borosilicate glass tubing, Second Edition
KS ISO 10545-10:2021 Kenya Standard—Ceramic tiles—Part 10: Determination of moisture expansion, Second Edition
KS ISO 10545-15:2021 Kenya Standard—Ceramic tiles—Part 15: Determination of lead and cadmium given off by tiles, Second Edition
KS ISO 17721-1:2021 Kenya Standard—Quantitative determination of antibacterial activity of ceramic tile surfaces—Test methods—Part 1: Ceramic tile surfaces with incorporated antibacterial agents, First Edition
KS IEC 60068-1:2013 Kenya Standard—Environmental testing—Part 1: General and guidance, Second Edition
KS ISO 5667-1:2020 Kenya Standard—Water quality— Sampling — Part 1: Guidance on The Design of Sampling Programmes, Second Edition
KS ISO 5667-3:2018 Kenya Standard—Water quality— Sampling — Part 3: Preservation and handling of water samples, Second Edition
KS ISO 5667-6:2014 Kenya Standard—Water quality— Sampling — Part 6: Guidance on sampling of rivers and streams, Second Edition
KS ISO 5667-10:2020 Kenya Standard—Water quality— Sampling — Part 10: Guidance on Sampling of waste waters, Second Edition
KS ISO 7393-2:2017 Kenya Standard—Water quality— Determination of free chlorine and total chlorine—Part 2: Colorimetric method using N,N-dialky1-1,4-phenylenediamine, for routine control purposes, Second Edition
KS ISO 10703:2021 Kenya Standard—Water quality— Determination of the activity concentration of radionuclides by high resolution gamma ray spectrometry, Second Edition
KS ISO 11260:2018 Kenya Standard—Soil quality—Determination of effective cation exchange capacity and base saturation level using barium chloride solution, Second Edition
KS ISO 15800:2019 Kenya Standard—Soil quality— Characterization of soil with respect to human exposure, Second Edition
Cosmetics
KS ISO 1272:2000 Kenya Standard—Essential oils—Determination of content of phenols, Second Edition
KS ISO/TS 210:2014 Kenya Standard—Essential oils—General rules for packaging, conditioning, and storage, Second Edition
KS ISO/TS 211:2014 Kenya Standard—Essential oils—General rules for labelling and marking of containers, Second Edition
KS ISO 212:2007 Kenya Standard—Essential oils—Sampling, Second Edition
KS ISO 3218:2014 Kenya Standard—Essential oils—Principles of nomenclature, Second Edition
13th May, 2022 THE KENYA GAZETTE 2541
Kenya Standard—Oil of cananga (Cananga odorata (Lam.) Hook. f. et Thomson, forma macrophylla), Second Edition
Kenya Standard—Oil of cinnamon leaf, Sri Lanka type (Cinnamomum zeylanicum Blume), Second Edition
Kenya Standard—Oil of amyris (Amyris balsamifera L.), Second Edition
KS ISO 14064-3:2019 Kenya Standard—Greenhouse gases—Part 3: Specification with guidance for the verification and validation of greenhouse gas statements, Second Edition
KS ISO 14040:2006/Amd 1:2020 Kenya Standard—Environmental management—Life cycle assessment—Principles and framework—AMENDMENT 1, First Edition
KS ISO 3523:2002
KS ISO 3524:2003
KS ISO 3525:2008
KS ISO 3848:2016
KS ISO 3849:2003
KS ISO 4720:2018
KS ISO 4724:2004
KS ISO 4725:2004
KS ISO 4727:2021
KS ISO 4730:2017
KS ISO 709:2001
Kenya Standard—Essential oil of citronella, Java type, Second Edition
Kenya Standard—Oil of citronella, Sri Lankan type (Cymbopogon nardus (L.) W. Watson var. lenabatu Stapf.), Second Edition
Kenya Standard—Essential oils — Nomenclature; Second Edition
Kenya Standard—Oil of cedarwood, Virginian (Juniperus virginiana L.), Second Edition
Kenya Standard—Oil of cedarwood, Texas (Juniperus mexicana Schiede), Second Edition
Kenya Standard—Essential oil of palmarosa [Cymbopogon martini (Roxb.) W. Watson var. motia], Second Edition
Kenya Standard—Essential oil of Melaleuca, terpinen-4-ol type (Tea Tree oil), First Edition
Kenya Standard—Essential oils—Determination of ester value, Second Edition
KS ISO 11930:2019 Kenya Standard—Cosmetics—Microbiology — Evaluation of the antimicrobial protection of a cosmetic product; Second Edition
KS ISO 20809:2017 Kenya Standard—Essential oil of cypress (Cupressus sempervirens L, First Edition
Services
KS ISO/IEC 11179-1:2015 Kenya Standard —Metadata registries (MDR)—Part 1: Framework, First Edition
KS ISO/IEC 11179-2:2019 Kenya Standard —Metadata registries (MDR)—Part 2: Classification, First Edition
KS ISO/IEC 11179-3:2013 Kenya Standard —Metadata registries (MDR)—Part 3: Registry metamodel and basic attributes, First Edition
KS ISO/IEC 11179-4:2004 Kenya Standard—Metadata registries (MDR)—Part 4: Formulation of data definitions, First Edition
KS ISO/IEC 11179-5:2015 Kenya Standard—Metadata registries (MDR)—Part 5: Naming Principles, First Edition
KS ISO/IEC 11179-6:2015 Kenya Standard —Metadata registries (MDR)—Part 6: Registration, First Edition
KS ISO/IEC 11179-7:2019 Kenya Standard —Metadata registries (MDR)—Part 7: Metamodel for data set registration, First Edition
KS ISO/IEC 11179-30:2019 Kenya Standard —Metadata registries (MDR)—Part 30: Basic attributes of metadata, First Edition
KS 1SG:1414031:2021 Kenya Standard—Environmental management—Environmental performance evaluation — Guidelines, Second Edition
KS ISO 14064-1:2018 Kenya Standard—Greenhouse gases—Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals, Second Edition
KS ISO 14064-2:2019 Kenya Standard—Greenhouse gases—Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements, Second Edition
KS ISO/IEC 17030:2021 Kenya Standard—Conformity assessment—General requirements for third party marks of conformity, Second Edition
KS ISO 30415:2021 Kenya Standard—Human resource management—Diversity and inclusion, First Edition
KS ISO/TS 30421:2021 Kenya Standard—Human resource management—Turnover and retention metrics, First Edition
KS ISO/TS 30428:2021 Kenya Standard—Human resource management— Skills and capabilities metrics cluster, First Edition
KS ISO/TS 30430:2021 Kenya Standard—Human resource management—Recruitment metrics cluster, First Edition
KS ISO/TS 30433:2021 Kenya Standard—Human resource management—Succession planning metrics cluster, First Edition
KS ISO 29994:2021 Kenya Standard—Education and learning services—Requirements for distance learning, First Edition
KS 2925:2022 Kenya Standard—Textiles—Reusable sanitary towels—Specification, Second Edition
Leather and Textile
KS ISO 2076:2021 Kenya Standard—Textiles—Man-made fibres—Generic names, Second Edition
KS ISO 2307:2019 Kenya Standard—Fibre ropes—Determination of certain physical and mechanical properties, Second-Edition
KS1S0 2403:2021 Kenya Standard—Textiles-Cotton fibres—Determination of micronaire value, First'Edition
KS ISO 405-B10:2011 Kenya Standard—Textiles—Tests for colour fastness—Part 810: Artificial weathering — Exposure to filtered xenon-arc radiation, First Edition
KS ISO' 05-B03:2017 Kenya Standard—Textiles—Tests for colour fastness—Part B03: Colour fastness •to weathering: Outdoor exposure, Second Edition
K836'03071:2020 Kenya Standard --Textiles —Determination of pH of aqueous extract, Second Edition
KS ISO 1833-20:2018 Kenya Standard—Textiles—Quantitative chemical analysis—Part 20: Mixtures of elastane with certain other fibres (method using dimethylacetamtde), First Edition
KS 150 1833-22:2020 Kenya -Standard—Textiles—Quantitative chemical analysis—Plitt 22:Mixtures of viscose or certain types of cupro or modal or lyocell with flax fibres (method using formic acid and zinc chloride), Second Edition
KS ISO 3175-1:2017 KenyaStanclattl—Textlies--:Pmfessional care, drycleaning and wetcleaning of fabrics and garments—Part 1: 'Assessment of performance after: it arkPirritiaMog,freeend Edition
KS4S03175-22017 41kettya *midst —"Petrilles--Professiortal care, dutletatatg and weteleaniog Sibrics and garments—Part :2: Procedure for wooing prtformance when eleaniog 4ittl 440taidog, Second Edition
2542 THE KENYA GAZETTE 13th May, 2022
KS ISO 3175-3:2017 Kenya Standard—Textiles—Professional care, drycleaning and wetcleaning of fabrics and garments—Part 3: Procedure for testing performance when cleaning and finishing using hydrocarbon solvents, Second Edition
KS ISO 3175-4:2018 Kenya Standard—Textiles—Professional care, drycleaning and wetcleaning of fabrics and garments—Part 4: Procedure for testing performance when cleaning and finishing using simulated wetcleaning, Second Edition
KS ISO 30023:2021 Kenya Standard — Textiles — Qualification symbols for labelling work wear to be industrially laundered, Second Edition
KS ISO 6330:2021 Kenya Standard—Textiles—Domestic washing and drying procedures for textile testing, Second Edition
KS ISO 11612:2015 Kenya Standard—Protective clothing—Clothing to protect against heat and flame - Minimum performance requirements, Second Edition
KS ISO 20743:2021 Kenya Standard—Textiles—Determination of antibacterial activity of textile products, Second Edition
KS ISO 21723:2019 Kenya Standard—Buildings and civil engineering works — Modular coordination —Module, First Edition
KS ISO 6707-2:2017 Kenya Standard—Buildings and civil engineering works — Vocabulary —Part 2: Contract and communication terms, Second Edition
KS ISO 6946:2017 Kenya Standard—Building components and building elements AE" Thermal resistance and thermal transmittance—Calculation methods, Second Edition
KS ISO 3008-1:2019 Kenya Standard—Fire resistance tests—Door and shutter assemblies—Part 1: General requirements, First Edition
KS ISO 4211-5:2021 Kenya Standard—Furniture—Tests for surface finishes—Part 5: Assessment of resistance to abrasion, First Edition
KS ISO 5323:2019 Kenya Standard—Wood flooring and parquet — Vocabulary, Second Edition
KS ISO 6442:2005 Kenya Standard—Door leaves—General and local flatness—Measurement method, Second Edition
KS ISO 6443:2005
KS ISO 6444:2005
KS ISO 6445:2005
KS ARS 1694:2021 Kenya Standard—Medical respirators — Specification, First Edition
KS ISO 10361:2015 Kenya Standard—Textile floor coverings—Production of changes in appearance by means of Vettermann drum and hexapod tumbler tester, Second Edition
KS ISO 1765:1986 Kenya Standard—Machine-made textile floor coverings—Determination of thickness, First Edition
Kenya Standard—Door leaves—Method for measurement of height, width, thickness and squareness, Second Edition
Kenya Standard—Door leaves—Determination of the behaviour under humidity variations in successive uniform climates, Second Edition
Kenya Standard—Doors—Behavior between two different climates—Test method, Second Edition
KS ISO 6530:2005 Kenya Standard—Protective clothing— Protection against liquid chemicals—Test method for resistance of materials to penetration by liquids, Second Edition
KS ISO 9405:2015 Kenya Standard—Textile floor coverings—Assessment of changes in appearance, Second Edition
KS ISO 2424:2007 Kenya Standard—Textile floor coverings — Vocabulary, Second Edition
KS 606:2022 Kenya Standard—Polyester and cotton blended bedsheets — Specification, Third Edition
KS 559-1:2022 Kenya Standard —Mens and boys' trousers — Specification —Part 1: Making up requirements, Fourth Edition
KS ISO 13938-1:2019 Kenya Standard—Bursting properties of fabrics—Part 1: Hydraulic method for determination of bursting strength and bursting distension, Second Edition
KS ISO 13938-2:2019 Kenya Standard—Textiles—Bursting properties of fabrics—Part 2: Pneumatic method for determination of bursting strength and bursting distension, Second Edition
KS 525:2022 Kenya Standard—Ladies' briefs — Specification, Second Edition
KS ISO 8274:2005 Kenya Standard—Windows and doors—Resistance to repeated opening and closing—Test method, Second Edition
KS ISO 9379:2005 Kenya Standard—Operating forces—Test method—Doors, Second Edition
KS ISO 9381:2005 Kenya Standard—Hinged or pivoted doors—Determination of the resistance to static torsion, Second Edition
KS ISO 1954:2013 Kenya Standard—Plywood—Tolerances on dimensions, Second Edition
KS ISO 2074:2007 Kenya Standard—Plywood—Vocabulary, Second Edition
KS 2770-5:2022 Kenya Standard—Admixtures for sprayed concrete—Part 5: Definitions, requirements, conformity, marking and labelling, First Edition
KS 2952-1:2022 Kenya Standard— Accessibility-ICT products and services—Part 1-Requirements, First Edition
KS 2952-2:2022 Kenya Standard— Accessibility-ICT products and services—Part 2 —Conformance, First Edition
KS EAS 132:2021 Kenya Standard—Hoe—Specification, First Edition
Engineering
KS ISO 22156:2021
KS ISO 13786:2017
KS ISO 19208:2016
Kenya Standard—Bamboo structures—Bamboo Culms Structural design, Second Edition
Kenya Standard—Thermal performance of building components dynamic thermal characteristics calculation methods, Second Edition
Kenya Standard—Framework for specifying performance in buildings, First Edition
KS EAS 188:2021
KS EAS 1020:2021
KS EAS 1021:2021
KS EAS 1022:2021
Electrotechnical
Kenya Standard—Machete—Specification, Second Edition
Kenya Standard—Shovels and spades — Specification, First Edition
Kenya Standard— Steelhead hammer — Specification, First Edition
Kenya Standard—Hacksaw blades — Specification, First Edition
KS ISO 26101-1:2021 Kenya Standard—Acoustics—Test methods for the qualification of the acoustic environment—
13th May, 2022 THE KENYA GAZETTE 2543
Part I: Qualification of free-field environments, First Edition
KS ISO 1996-2:2017 Kenya Standard—Acoustics—Description, measurement and assessment of environmental noise—Part 2: Determination of sound pressure levels, First Edition
KS ISO 17099:2014 Kenya Standard—Radiological protection—Performance criteria for laboratories using the cytokinesis block micronucleus (CBMN) assay in peripheral blood lymphocytes for biological dosimetry, First Edition
KS IEC 60601-2-17:2013 Kenya Standard—Medical electrical equipment—Part 2-17: Particular requirements for the basic safety and essential performance of automatically-controlled brachytherapy after loading equipment, First Edition
KS IEC 60601-2-45:2015 Kenya Standard—Medical electrical equipment—Part 2-45: Particular requirements for the basic safety and essential performance of mammographic X-ray equipment and mammographic stereotactic devices, Second Edition
KS IEC 60601-2-542018 Kenya Standard—Medical electrical equipment—Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy, First Edition
KS IEC 60601-2-68:2014 Kenya Standard—Medical electrical equipment—Part 2-68: Particular requirements for the basic safety and essential performance of X-ray-based image-guided radiotherapy equipment for use with electron accelerators, light ion beam therapy equipment and radionuclide beam therapy equipment, First Edition
KS ISO 463:2006 Kenya Standard—Geometrical Product Specifications (GPS) —Dimensional measuring equipment—Design and metrological characteristics of mechanical dial gauges, First Edition
KS ISO 3611:2010 Kenya Standard—Geometrical Product Specifications (GPS)—Dimensional measuring equipment: Micrometers for external measurements—Design and metrological characteristics, First Edition
KS ISO 13385-1:2019 Kenya Standard—Geometrical Product Specifications (GPS)—Dimensional measuring equipment—Part 1: Design and metrological characteristics of calipers, First Edition
KS ISO 13385-2:2020 Kenya Standard—Geometrical Product Specifications (GPS)—Dimensional measuring equipment—Part 2: Design and metrological characteristics of calliper depth gauges, First Edition
KS ISO 1122-1:1998 Kenya Standard—Vocabulary of gear terms—Part 1: Definitions related to geometry, First Edition
KS ISO 21771:2007 Kenya Standard—Gears—Cylindrical involute gears and gear pairs—Concepts and geometry, First Edition
KS ISO/IEC 11801-1:2017 Kenya Standard—Information Technology—Generic cabling for customer premises—Part 1: General requirements, First Edition
KS ISO/IEC 11801-2:2017 Kenya Standard—Information Technology—Generic cabling for customer premises—Part 2: Office premises, First Edition
KS ISO/IEC 11801-3: 2021 Kenya Standard—Information Technology—Generic cabling for customer premises—Part 3: Industrial premises, First Edition
KS ISO/IEC 11801-4:2017 Kenya Standard—Information Technology—Generic cabling for customer premises—Part 4: Single-tenant homes, First Edition
KS ISO/IEC 11801-5:2017 Kenya Standard—Information Technology - Generic cabling for customer premises—Part 5: Data centres, First Edition
KS ISO/IEC 11801-6:2017 Kenya Standard—Information Technology —Generic cabling for customer premises—Part 6: Distributed building services, First Edition
KS ISO/IEC TR 11801-9901:2014 Kenya Standard—Information Technology—Generic cabling for customer premises—Part 9901: Guidance for balanced cabling in support of at least 40 Gbit/s data transmission, First Edition
KS ISO/IEC TR 11801-9902:2017 Kenya Standard—Information Technology—Generic cabling for customer premises—Part 99-2: End-to-end link configurations, First Edition
KS ISO/IEC TS 11801-9903:2021 Kenya Standard—Information Technology—Generic cabling for customer premises—Part 9903: Matrix modelling of channels and links, First Edition
KS ISO/IEC TR 11801-9904:2017 Kenya Standard—Information Technology—Generic cabling for customer premises—Part 9904: Assessment and mitigation of installed balanced cabling channels to support 2,5GBASE-T and 5GBASE-T, First Edition
KS ISO/IEC TR 11801-9905:2018 Kenya Standard—Information Technology—Generic cabling systems for customer premises—Part 9905: Guidelines for the use of installed cabling to support 25GBASE-T application, First Edition
KS ISO/IEC TR 11801-9906:2020. Kenya Standard—Information Technology—Generic cabling for customer premises—Part 9906: Balanced 1-pair cabling channels up to. 600 MHz for single pair Ethernet (SPE) , First Edition
KS ISO/IEC TR 11801-9907:2019 Kenya Standard—Information Technology—Generic cabling for customer premises—Part 9907: Specifications for direct attach cabling, First Edition
KS ISO/IEC TR 11801-9908:2020 Kenya Standard—Information Technology—Generic cabling for customer premises—Part 9908: Guidance for the support of higher speed applications over optical fibre channels, First Edition
KS ISO/IEC TR 11801-9909:2020 Kenya Standard—Information Technology—Generic cabling for customer premises—Part 9909: Evaluation of balanced cabling in support of 25 Gbit/s for reach greater than 30 metres, First Edition
KS ISO/IEC TR 11801-9910:2020 Kenya Standard—Information Technology—Generic cabling for customer premises—Part 9910: Specifications for modular plug terminated link cabling, First Edition
KS CISPR/TR 18-1:2017 Kenya Standard—Radio interference characteristics of overhead power lines and high-voltage equipment—Part 1: Description of phenomena, First Edition
KS CISPR/TR 18-2:2017 Kenya Standard—Radio interference characteristics of overhead power lines and high-voltage equipment—Part 2: Methods of measurement and procedure for determining limits, First Edition
KS CISPR/TR 18-3:2017 Kenya Standard—Radio interference characteristics of overhead power lines and high-voltage equipment—Part 3: Code of
2544 THE KENYA GAZETTE 13th May, 2022
practice for minimizing the generation of radio noise, First Edition
KS IEC 60670-21:2016 Kenya Standard—Boxes and enclosures for electrical accessories for household and similar fixed electrical installations—Part 21: Particular requirements for boxes and enclosures with provision for suspension means, Second Edition
KS IEC 60670-22: 2015 Kenya Standard—Boxes and enclosures for electrical accessories for household and similar fixed electrical installations—Part 22: Particular requirements for connecting boxes and enclosures, Second Edition
KS IEC 60670-23:2016 Kenya Standard—Boxes and enclosures for electrical accessories for household and similar fixed electrical installations—Part 23: Particular requirements for floor boxes and enclosures, Second Edition
KS IEC 61936-1:2021 Kenya Standard—Power installations exceeding 1 kV AC and 1,5 kV DC—Part 1: AC, Second edition
KS IEC 60034-3:2020 Kenya Standard—Rotating electrical machines—Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines and for synchronous compensators, Second Edition
KS LEC 60309-1:2021Kenya Standard—Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes—Part 1: General requirements, First Edition
KS IEC 60309-2:2021Kanya Standard—Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes—Part 2: Dimensional compatibility requirements for pin and contact-tube accessories, First Edition
KS IEC 60309-4:2021 Kenya Standard—Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes—Part 4: Switched socket-outlets with or without interlock, First Edition
KS IEC 60309-5:2017 Kenya Standard—Plugs, socket-outlets and couplers for industrial purposes—Part 5: Dimensional compatibility and interchangeability requirements for plugs, socket-outlets, ship connectors and ship inlets for low-voltage shore connection systems (LVSC), First Edition
KS IEC 62444:2010 Kenya Standard—Cable glands for electrical installations, First Edition
KS IEC 61921:2017 Kenya Standard—Power capacitors — Low-voltage power factor correction banks, First Edition
KS IEC 61008-2-1:1990- Kenya Standard—Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's)—Part 2-I: Applicability of the general rules to RCCB's functionally independent of line voltage, First Edition
KS IEC 61008-2-2:1990 Kenya Standard—Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's)—Part 2-2: Applicability of the general rules to RCCB's functionally dependent on line voltage, First Edition
KS IEC 61008-1:2013 Kenya Standard—Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) Partl: General rules, First Edition
KS IEC 60898-3:2019 Kenya Standard—Electrical accessories — Circuit-breakers for overcurrent protection for household and similar installations—Part 3: Circuit-breakers for DC operation, First Edition
KS IEC 61009-1:2013 Kenya Standard—Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs)—Part 1: General rules, First Edition
KS IEC 61009-2-1:1991 Kenya Standard—Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's)—Part 2-1: Applicability of the general rules to RCBO's functionally independent of line voltage, First Edition
KS IEC 61009-2-2:1991 Kenya Standard—Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's)—Part 2-2: Applicability of the general rules to RCBO's functionally dependent on line voltage, First Edition
KS IEC 63052:2019 Kenya Standard—Power frequency overvoltage protective devices (POPs) for household and similar applications, First Edition
KS IEC 60826:2017 Kenya Standard—Design criteria of overhead transmission lines, Second Edition
KS IEC 61969-1:2020 Kenya Standard—Mechanical structures for electrical and electronic equipment - Outdoor enclosures—Part 1: Design guidelines, Second Edition
KS IEC 62053-21:2020 Kenya Standard—Electricity metering equipment (a.c.)—Particular requirements—Part 21: Static meters for AC active energy (classes 0,5, 1 and 2), Second Edition
KS IEC 62053-22:2020 Kenya Standard—Electricity metering equipment—Particular requirements—Part 22: Static meters for AC active energy (classes 0,1S, 0,2S and 0,5S), Second Edition
KS IEC 62053-23:2020 Kenya Standard—Electricity metering equipment (a.c .)— Particular requirements—Part 23: Static meters for reactive energy (classes 2 and 3). Second Edition
KS IEC 62052-11:2020 Kenya Standard—Electricity metering equipment—General requirements, tests and test conditions—Part 11: Metering equipment, Second Edition
KS IEC 60282-1:2020 Kenya Standard—High-voltage fuses—Part 1: Current-limiting fuses, Second Edition
KS 2951:2022 Kenya Standard— Biogas systems—Code of practice for farm and industrial scale biogas systems, First Edition
The following standards are confirmed forthwith;Food.
KS 1772:2003 Kenya Standard—Specification for jelly powder and jelly crystals
KS CAC/GL 78:2011 Kenya Standard—Guidelines for the control of campylobacter and salmonella in chicken meat
KS ISO 1736:2008 Kenya Standard—Dried milk and dried milk products—Determination of fat content — Gravimetric method reference method
KS 1302:1996 Kenya Standard—Specification for bread crumbs
KS 1154:1996
Kenya Standard—Whole dried and ground ginger—Specification
KS 1155:2008 Kenya Standard—Whole and ground nutmeg— Specification
KS 1162:2008 Kenya Standard—Fenugreek seed powder— Specification
KS 2050:2007 Kenya Standard—Soy sauce—Specification
KS 228-3:1986 Kenya Standard—Specification for curry powder—Part 3: Determination of filth and extraneous matter in spices and condiments
13th May, 2022 THE KENYA GAZETTE 2545
KS ISO 927:2009/COR 1:2012 Kenya Standard—Spices and condiments—Determination of extraneous matter and foreign matter content—Technical Corrigendum 1
KS ISO 7542:1984 Kenya Standard—Ground (powdered) paprika (Capsicum annuum Linnaeus)—Microscopical examination
KS ISO 676:1995/COR 1:1997 Kenya Standard—Spices and condiments—Botanical nomenclature— TECHNICAL CORRIGENDUM 1
KS ISO 6663:1998 Kenya Standard—Garlic cold storage
KS ISO 5560:1997 Kenya Standard — Dehydrated garlic (Allium sativum L.) — Specification
KS ISO 5561:1990 Kenya Standard—Black caraway and blond caraway (Carum carvi Linnaeus), whole Specification
KS ISO 5565-1:1999 Kenya Standard—Vanilla [Vanilla fragrant (Salisbury) Ames] —Part 1: Specification
KS ISO 2256:1984/AMD 1:2017 Kenya Standard—Dried mint (spearmint) (Mentha spicata Linnaeus syn. Mentha viridis Linnaeus)—Specification — AMENDMENT 1
KS RAS 107:2007 Kenya Standard—Coffee—Determination of caffeine content—Reference method
KS ISO 6667:1985 Kenya Standard—Green coffee—Determination of proportion of insect damaged beans
KS 2221:2011 Kenya Standard—Coffee packaging— Specification
KS ISO 6666:2011 Kenya Standard—Coffee—Sampling triers for green coffee or raw coffee and parchment coffee
KS EAS 5:2009
Kenya Standard—Refined white sugar— Specification
KS 319-4:2008
Kenya Standard—Sugar confectionery — Specification—Part 4 Other sugar confectionery products
KS EAS 17:2000
Kenya Standard—Methods of chemical analysis for sugar—Specification
KS EAS 818:2014 Kenya Standard—Sugar cane jaggery — Specification
KS ISO 2292:2017 Kenya Standard—Cocoa beans— Sampling
KS 2722:2017
Kenya Standard—Rabbit meat—Specification
KS 2723:2017
Kenya Standard—Dried meat—Specification
KS CODEX STAN 96:1991 Kenya Standard—Standard for cooked cured ham
KS ISO 10272-1:2017 Kenya Standard—Microbiology of the food chain horizontal method for detection and enumeration of campylobacter Spp —Part 1: Detection method
KS ISO 10272-2:2017 Kenya Standard—Microbiology of the food chain horizontal method for detection and enumeration of campylobacter Spp—Part 2: Colony count technique
KS ISO 11290-1:2017 Kenya Standard—Microbiology of the food chain horizontal method for the detection and enumeration of listeria monocytogenes and of listeria Spp—Part 1: Detection method
KS ISO 11290-2:2017 Kenya Standard—Microbiology of the food chain horizontal method for the detection and enumeration of listeria monocytogenes and of listeria Spp —Part 2: Enumeration method
KS ISO 21528-1:2017 Kenya Standard—Microbiology of the food chain horizontal method for the detection and enumeration of Enterobacteriaceae —Part 1: Detection of Enterobacteriaceae
KS ISO 21528-2:2017 Kenya Standard—Microbiology of the food chain horizontal method for the detection and enumeration of enterobacteriaceae—Part 2: Colony count technique
KS 791:1990 Kenya Standard—Methods of detection of salmonellae in meat and meat products
KS 792:1991 Kenya Standard—Method of detection and enumeration of enterobacteriaceae in meat and meat product
KS CODEX STAN 89:1981 Kenya Standard—Standard for luncheon meat
KS 1172:1995 Kenya Standard—Specification for grading chicken eggs
KS 166:2000 Kenya Standard—Methods for the chemical analysis of meat and meat products
Agriculture
KS ISO 15914:2004 Kenya Standard—Animal feeding stuffs enzymatic determination of total starch content
KS 2289-1:2017 Kenya Standard—Compounded tilapia feeds — Specification —Part 1: Complete feed
KS 2710:2017 Kenya Standard—Prosopis meal for compounding animal feeds—Specification
KS 2711:2017 Kenya Standard—Dried insect products for compounding animal feeds—Specification
KS CAC/GL 71:2009 Kenya Standard—Guidelines for the design and implementation of national regulatory food safety assurance programme associated with the use of veterinary drugs in food producing animals
Chemical
KS 1182:1994
Kenya Standard—Specification for butyl alcohol (butonal for industrial use)
KS 2272:2011
Kenya Standard—Nitric acid—Specification
KS 242:1980
Kenya Standard—Specification for sulphuric acid for use in lead-acid batteries
KS 2692-1:2017
Kenya Standard—Alcohol denaturants— Specification
KS 591:2011
Kenya Standard—Denatured spirits— Specification
KS 666:2011
Kenya Standard—Specification for white spirit (mineral turpentine)
KS EAS 213:2007 Kenya Standard—Liquid chemical products for industrial use—Determination of absolute density at 20 degree centigrade
KS EAS 214:2007 Kenya Standard—Volatile organic liquids for industrial use—Determination of dry residue after evaporation on a water bath— General method
KS ISO 1388-1:1981 Kenya Standard—Ethanol for industrial use—Methods of test—Part 1: General
KS ISO 1388-10:1981 Kenya Standard—Ethanol for industrial use—Methods of test—Part 10: Estimation of hydrocarbons content—Distillation method
KS ISO 1388-11:1981 Kenya Standard—Ethanol for industrial use—Methods of test—Part 11: Test for detection of furfural
KS ISO 1388-12:1981 Kenya Standard—Ethanol for industrial use—Methods of test—Part 12: Determination of permanganate time
KS ISO 1388-2:1981 Kenya Standard—Ethanol for industrial use—Methods of test—Part 2: Detection of alkalinity or determination of acidity to phenolphthalein
2546 THE KENYA GAZETTE 13th May, 2022
KS ISO 1388-3:1981 Kenya Standard—Ethanol for industrial use—Methods of test—Part 3: Estimation of content of carbonyl compounds present in small amounts—Photometric method
KS ISO 1388-4:1981 Kenya Standard—Ethanol for industrial use—Methods of test—Part 4: Estimation of content of carbonyl compounds present in moderate amounts —Titrimetric method
KS ISO 1388-5:1981 Kenya Standard—Ethanol for industrial use—Methods of test—Part 5: Determination of aldehydes content—Visual colorimetric method
KS ISO 1388-6:1981 Kenya Standard—Ethanol for industrial use—Methods of test—Part 6: Test for miscibility with water
KS ISO 1388-7:1981 Kenya Standard—Ethanol for industrial use—Methods of test—Part 7: Determination of methanol content (methanol contents between 0,01 and 0,20 % (v/v))—Photometric method
KS ISO 1388-8:1981 Kenya Standard—Ethanol for industrial use—Methods of test—Part 8: Determination of methanol content (methanol contents between 0,10 and 1,50 % (v/v))—Visual colorimetric method
KS ISO 1388-9:1981 Kenya Standard—Ethanol for industrial use—Methods of test—Part 9: Determination of esters content —Titrimetric method after saponification
KS ISO 2482:1973 Kenya Standard—Sodium chloride for industrial use—Determination of calcium and magnesium contents—Edta complexometric methods
KS ISO 2483:1973 Kenya Standard—Sodium chloride for industrial use—Determination of the loss of mass at 110 degrees C
KS ISO 6353.3:1987 Kenya Standard—Reagents for chemical analysis—Part 3: Specifications—Second series
KS ISO 758:1976 Kenya Standard—Liquid chemical products for industrial use—Determination of density at 20 degrees c
KS ISO 759:1981 Kenya Standard—Volatile organic liquids for industrial use—Determination of dry residue after evaporation on water bath—General method
KS ISO 918:1983
Kenya Standard—Volatile organic liquids for industrial use—Determination of distillation characteristics
KS 353:1985
Kenya Standard—Specification for crown finish glass bottles
KS 378:1982
Kenya Standard—Glossary of terms relating to glass industry
KS 513:1985
Kenya Standard—Specification for glass tableware
KS 514:1985
Kenya Standard—Method of sampling and test for glass bottles
KS 649-1:1989
Kenya Standard—Specification for toughened automobile windscreens—Part 1: Specification for toughed windscreens
KS 650:2001
Kenya Standard—Specification for glass globes for paraffin lighting appliances for domestic use
KS ISO 13079:2011 Kenya Standard—Laboratory glass and plastics ware—Tubes for the measurement of the erythrocyte sedimentation rate by the westergren method
KS ISO 13130:2011 Kenya Standard—Laboratory glassware—Desiccators
KS ISO 1772:1975 Kenya Standard—Laboratory crucibles in porcelain and silica
KS ISO 1773:1997 Kenya Standard—Laboratory glassware — Narrow-necked boiling flasks
KS ISO 1775:1975 Kenya Standard—Porcelain laboratory apparatus—Requirements and methods of test
KS ISO 3585:1998 Kenya Standard—Borosilicate glass 3.3 — Properties
KS ISO 383:1976
Kenya Standard—Laboratory glassware— Interchangeable conical ground joints
KS ISO 4785:1997 Kenya Standard—Laboratory glassware — Straight-bore glass stopcocks for general purposes
KS ISO 4788:2005 Kenya Standard—Laboratory glassware—Graduated measuring cylinders
KS ISO 4791-1:1985 Kenya Standard—Laboratory apparatus—Vocabulary relating to apparatus made essentially from glass, porcelain or vitreous silica—Part 1: Names for items of apparatus
KS ISO 4794:1982 Kenya Standard—Laboratory glassware—Methods for assessing the chemical resistance of enamels used for colour coding and colour marking
KS ISO 4796-2:2000 Kenya Standard—Laboratory glassware — Bottles —Part 2: Conical neck bottles
KS ISO 4796-3:2000 Kenya Standard—Laboratory glassware — Bottles —Part 3: Aspirator bottles
KS ISO 4799:1978 Kenya Standard—Laboratory glassware—Condensers
KS ISO 4800:1998 Kenya Standard—Laboratory glassware—Separating funnels and dropping funnels
KS ISO 4802-1:1988 Kenya Standard—Glassware—Hydrolytic resistance of the interior surfaces of glass containers—Part 1: Determination by titration method and classification
KS ISO 7056:1981 Kenya Standard—Plastics laboratory ware—Beakers
KS ISO 7086-2:2000 Kenya Standard—Glass hollowware in contact with food—Release of lead and cadmium—Part 2: Permissible limits
KS ISO 718:1990 Kenya Standard—laboratory glassware— thermal shock and thermal shock endurance—Test methods
KS ISO 7713:1985 Kenya Standard—Laboratory glassware—Disposable serological pipettes
KS ISO 10545-1:2014 Kenya Standard—Ceramic tiles—Part 1: Sampling and basis for acceptance
KS ISO/TR 17870-1:2015 Kenya Standard—Ceramic tiles—Guidelines for installation—Part 1: Installation of ceramic wall and floor tiles
KS ISO/TR 17870-2:2015 Kenya Standard—Ceramic tiles—Guidelines for installation—Part 2: Installation of thin ceramic wall and floor tiles and panels
KS ISO 10545-11:1994 Kenya Standard—Ceramic tiles —Part 11: Determination of crazing resistance for glazed tiles
KS ISO 10545-5:1996 Kenya Standard—Ceramic tiles—Part 5: Determination of impact resistance by measurement of coefficient of restitution
KS ISO 10545-7:1996 Kenya Standard—Ceramic tiles—Part 7: Determination of resistance to surface abrasion for glazed tiles
KS ISO 13132:2011 Kenya Standard—Laboratory glassware—Petri dishes KS ISO 10545-12:1995 Kenya Standard—Ceramic tiles—Part 12:
Determination of frost resistance
13th May, 2022 THE KENYA GAZETTE 2547
KS ISO 6486-2:1999 Kenya Standard—Ceramic ware, glass-ceramic ware and glass dinnerware in contact with food—Release of lead and cadmium—Part 2: Permissible limits
KS ISO 8391-1:1986 Kenya Standard—Ceramic cookware in contact with food—Release of lead and cadmium—Part 1: Method of test
KS ISO 8391-2:1986 Kenya Standard—Ceramic cookware in contact with food—Release of lead and cadmium—Part 2: Permissible limits
KS 289:1980 Kenya Standard—Specification for unbacked flexible PVC floor covering
KS ISO 14644-4:2001 Kenya Standard —Cleanrooms and associated controlled environments—Part 4: Design, construction and start-up
KS ISO 14644-5:2004 Kenya Standard —Cleanrooms and associated controlled environments—Part 5: Operations
KS ISO 14644-7:2004 Kenya Standard —Cleanrooms and associated controlled environments —Part 7: Separative devices (clean air hoods, gloveboxes, isolators and mini-environments)
KS ISO 14698-1:2003 Kenya Standard —Cleanrooms and associated controlled environments —Biocontamination control—Part 1: General principles and methods
KS ISO 14698-2:2003 Kenya Standard —Cleanrooms and associated controlled environments —Biocontatnination control—Part 2: Evaluation and interpretation of biocontamination data
KS ISO 14698-2:2003/cor 1:2004 Kenya Standard —Cleanrooms and associated controlled environments — Biocontatnination control—Part 2: Evaluation and interpretation of biocontamination data—Technical CORRIGENDUM 1
KS IEC 60068-2-21:2006 Kenya Standard—Environmental testing—Part 2-21: Tests - Test u: Robustness of terminations and integral mounting devices
KS ISO 14644-15:2017 Kenya Standard— cleanrooms and associated controlled environments—Part 15: Assessment of suitability for use of equipment and materials by airborne chemical concentration
KS ISO 14644-13:2017 Kenya Standard —Cleanrooms and associated controlled environments—Part 13: Cleaning of surfaces to achieve defined levels of cleanliness in terms of particle and chemical classifications
KS ISO 14596:2007 Kenya Standard—Petroleum products— Determination of sulfur content—Wavelength-dispersive x-ray fluorescence spectrometry
KS ISO 15167:1999 Kenya Standard—Petroleum products— Determination of particulate content of middle distillate fuels—Laboratory filtration method
KS ISO 15169:2003 Kenya Standard—Petroleum and liquid petroleum products—Determination of volume, density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems
KS ISO 1998-7:1998 Kenya Standard—Petroleum industry — Terminology—Part 7: Miscellaneous terms
KS ISO 1998-99:2000 Kenya Standard—Petroleum industry — Terminology —Part 99: General and index
KS ISO 2049:1996 Kenya Standard—Petroleum products— Determination of colour (astm scale)
KS ISO 20764:2003 Kenya Standard—Petroleum and related products—Preparation of a test portion of high-boiling liquids for the determination of water content—Nitrogen purge method
KS ISO 20847:2004 Kenya Standard—Petroleum products— Determination of sulfur content of automotive
fuels —Energy-dispersive x-ray fluorescence spectrometry
KS ISO 2719:2016 Kenya Standard—Determination of flash point— Pensky-martens closed cup method
KS ISO 2909:2002 Kenya Standard—Petroleum products— Calculation of viscosity index from kinematic viscosity
KS ISO 3007:1999 Kenya Standard—Petroleum products and crude petroleum—Determination of vapour pressure—Reid method
KS ISO 3012:1999 Kenya Standard—Petroleum products— Determination of thiol (mercaptan) sulfur in light and middle distillate fuels—Potentiometric method
KS ISO 3733:1999 Kenya Standard—Petroleum products and bituminous materials—Determination of water—Distillation method
KS ISO 3735:1999 Kenya Standard—Crude petroleum and fuel oils — Determination of sediment—extraction method
KS ISO 3771:2011 Kenya Standard—Petroleum products— Determination of base number — Perchloric acid potentiometric titration method
KS ISO 3830:1993 Kenya Standard—Petroleum products— Determination of lead content of gasoline—Iodine monochloride method
KS ISO 3837:1993 Kenya Standard—Liquid petroleum products — Detertnination of hydrocarbon types—Fluorescent indicator adsorption method
KS ISO 4269:2001 Kenya Standard—Petroleum and liquid petroleum products—Tank calibration by liquid measurement—Incremental method using volumetric meters
KS ISO 4512:2000 Kenya Standard—Petroleum and liquid petroleum products—Equipment for measurement of liquid levels in storage tanks—Manual methods
KS ISO 6245:2001 Kenya Standard—Petroleum products— Determination of ash
KS ISO 6247:1998 Kenya Standard—Petroleum products— Determination of foaming characteristics of lubricating oils
KS ISO 6293-1:1996 Kenya Standard—Petroleum products— Determination of saponification number—Part 1: Colour-indicator titration method
KS ISO 6293-2:1998 Kenya Standard—petroleum products— Determination of saponification number—Part 2: Potentiometric titration method
KS ISO 6296:2000 Kenya Standard—Petroleum products— Determination of water—Potentiometric Karl Fischer titration method
KS ISO 6614:1994 Kenya Standard—Petroleum products— Determination of water separability of petroleum oils and synthetic fluids
KS ISO 6615:1993 Kenya Standard—Petroleum products— Determination of carbon residue— Conradson method
KS ISO 6619:1988 Kenya Standard—Petroleum products and lubricants—Neutralization number— Potentiometric titration method
KS ISO 7507-1:2003 Kenya Standard—Petroleum and liquid petroleum products—Calibration of vertical cylindrical tanks—Part 1: Strapping method
KS ISO 7507-2:2005 Kenya Standard—Petroleum and liquid petroleum products—Calibration of vertical cylindrical tanks—Part 2: Optical-reference-line method
2548 THE KENYA GAZETTE 13th May, 2022
KS ISO 7507-3:2006 Kenya Standard—Petroleum and liquid petroleum products—Calibration of vertical cylindrical tanks—Part 3: Optical-triangulation method
KS ISO 7507-4:2010 Kenya Standard—Petroleum and liquid petroleum products — Calibration of vertical cylindrical tanks—Part 4: Internal electro-optical distance-ranging method
KS ISO 7507-5:2000 Kenya Standard—Petroleum and liquid petroleum products—Calibration of vertical cylindrical tanks—Part 5: External electro-optical distance-ranging method
KS ISO 7536:1994 Kenya Standard—Petroleum products— Determination of oxidation stability of gasoline—Induction period method
KS ISO 7537:1997 Kenya Standard—Petroleum products— Determination of acid number—Semi-micro colour-indicator titration method
KS ISO 8754:2003 Kenya Standard—Petroleum products— Determination of sulfur content—Energy-dispersive x-ray fluorescence spectrometry
KS ISO 9200:1993 Kenya Standard—Crude petroleum and liquid petroleum products—Volumetric metering of viscous hydrocarbons
KS ISO 10370:2014 Kenya Standard—Petroleum products— Determination of carbon residue—Micro method
KS ISO 10478:1994 Kenya Standard—Petroleum products— Determination of aluminium and silicon in fuel oils—Inductively coupled plasma emission and atomic absorption spectroscopy methods
KS ISO 11223:2004 Kenya Standard—Petroleum and liquid petroleum products—Direct static measurements—Measurement of content of vertical storage tanks by hydrostatic tank gauging
KS ISO 11563:2003 Kenya Standard—Crude petroleum and petroleum products—Bulk cargo transfer—guidelines for achieving the fullness of pipelines
KS ISO 1998-6:2000 Kenya Standard—petroleum industry — terminology—Part 6: Measurement—Current version
KS 2490:2013 Kenya Standard—Automatic transmission fluid— Specification
KS ISO 8216-3:1987 Kenya Standard—Petroleum products—fuels (class f)—Classification—Part 3: Family I (liquefied petroleum gases)
KS ISO 1309-2:1996 Kenya Standard—Specification for diesel fuels—Part 2: Industrial diesel oil
KS ISO 12185:1996 Kenya Standard—Crude petroleum and petroleum products—Determination of density—Oscillating u-tube method
KS ISO 12205:1995 Kenya Standard—Petroleum products— Determination of the oxidation stability of middle-distillate fuels
KS ISO 12917-2:2002 Kenya Standard—Petroleum and liquid petroleum products—Calibration of horizontal cylindrical tanks—Part 2: Internal electro-optical distance-ranging method
KS ISO 12937:2000 Kenya Standard—Petroleum products— Determination of water—Coulometric Karl Fischer titration method
KS 1968:2006
Kenya Standard—The petroleum industry— Electrical installations in the distribution and marketing sector—Code of practice
KS 2501:2013 Kenya Standard—Detergent disinfectant liquid toilet cleansers—Specification
KS 809-3:2013 Kenya Standard—Specification for toilet cleaners—Part 3: Alkaline and neutral liquid toilet cleaners
KS 929:2016 Kenya Standard—Chemical disinfectants and antiseptics—Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic and institutional areas—Test method and requirements (Phase 2, step 1)
KS 809-1:1988 Kenya Standard—Specification for toilet cleansers—Part 1: Powder toilet bowl cleanser
KS 45:1977
Kenya Standard—Methods of analysis for soaps
KS 1796:2003
Kenya Standard—Specification for domestic chlorine based sterilizing fluids
KS 2502:2013
Kenya Standard—Liquid oxygen based bleach for domestic use specification
KS 1455-1:1999
Kenya Standard—Specification for glass cleaner—Part 1: Liquid glass cleaner
KS 1795:2003
Kenya Standard—Neem herbal soap— Specification
KS 1921:2005
Kenya Standard—Gel soap—Specification
KS 2115:2007
Kenya Standard—Soap powder or chips— Specification
KS 386:1982
Kenya Standard—Specification for carbolic toilet soap
KS 803-1:1988
Kenya Standard—Specification for liquid soaps—Part 1: Toilet soap
KS 44-2:2005
Kenya Standard—Toilet soaps — Specification—Part 2: Baby soaps
KS 803-2:1988
Kenya Standard—Specification for liquid soaps—Part 2: Liquid floor soap
KS 803-3:1988
Kenya Standard—Specification for liquid soaps—Part 3: Lotion soap
KS 805:1988
Kenya Standard—Specification for a waterless hand cleaner
KS 2162:2009
Kenya Standard—Products used for treatment of water intended for human consumption—Inorganic supporting and filtering materials—Definitions
KS 2163:2009
Kenya Standard—Products used for treatment of water intended for human consumption—Inorganic supporting and filtering materials—Methods of test
KS 2587:2015
Kenya Standard—Chemicals used for treatment of water intended for human consumption—Chemicals for emergency use sodium dichloroisocyanurate dihydrate
KS 2588:2015
Kenya Standard—Chemicals used for treatment of water intended for human consumption—Chemicals for emergency use sodium dichloroisocyanurate anhydrous
KS 2258:2010
Kenya Standard—Specification for water for lead acid batteries
KS 2637:2016
Kenya Standard—Chlorine tablets— Specification
KS 2639:2016
Kenya Standard—Copper sulphate— Specification
KS 1918:2005
Kenya Standard—Chemicals used for treatment of water intended for human consumption anionic and non-ionic polyacrylamides—Specification
13th May, 2022 THE KENYA GAZETTE 2549
KS 1919:2005 Kenya Standard—Chemicals used for treatment of water intended for human consumption poly diallyldimethylammonium chloride polydadmac —Specification
KS 1920:2005 Kenya Standard—Chemicals used for treatment of water intended for human consumption cationic polyacrylamides —Specification
KS 1940:2005 Kenya Standard—Chemicals used for treatment of water intended for human consumption polyamines — Specification
KS 88:1979 Kenya Standard—Specification for distilled water
Cosmetics
KS ISO 1041:1973 Kenya Standard—Essential oils—Determination of freezing point
KS ISO/TR 11018:1997 Kenya Standard—Essential oils—General guidance on the determination of flashpoint
KS ISO 1241:1996 Kenya Standard—Essential oils—Determination of ester values, before and after acetylation, and evaluation of the contents of free and total alcohols
KS ISO 1242:1999 Kenya Standard—Essential oils—Determination of acid value
Kenya. Standard—Essential oils—Determination of carbonyl value—Free hydroxylamine method
Kenya Standard—Essential oils—Determination of carbonyl value —Potentiometric methods using hydroxylammonium chloride
Kenya Standard—Essential oils—Determination of relative density at 20 °C—Reference method Kenya Standard—Essential oils—Determination of refractive index
Kenya Standard—Cosmetics—Microbiology — Guidelines for the risk assessment and identification of tnictobiologically low-risk products
KS ISO 3141:1997 Kenya Standard—Oil of clove leaves [Syzygium aromaticum (L.) Merr. et Perry, syn. Eugenia caryophyllus (Sprengel) Bullock et S. Harrison]
KS ISO 3142:1997 Kenya Standard—Oil of clove buds [Syzygium aromaticum (L.) Merr. et Perry, syn. Eugenia caryophyllus (Sprengel) Bullock et S. Harrison]
KS ISO 3143:1997 Kenya Standard—Oil of clove stems [Syzygium aromaticum (L.) Merr. et Perry, syn. Eugenia caryophyllus (Sprengel) Bullock et S. Harrison]
KS ISO 3516:1997 Kenya Standard—Oil of coriander fruits (Coriandrum sativum L.)
KS ISO 3520:1998 Kenya Standard—Oil of bergamot [Citrus aurantium L. subsp. bergamia (Wight et Arnott) Engler], Italian type
Kenya Standard—Oil of cubeb. This standard was last reviewed and confirmed in 2017
Kenya Standard—Essential oils (containing tertiary alcohols)—Estimation of free alcohols content by determination of ester value after acetylation
Kenya Standard—Essential oils — Quantitative evaluation of residue on evaporation
Kenya Standard—Essential oils—Determination of optical rotation
Kenya Standard—Essential oils — Analysis by gas chromatography on packed columns—General method
KS ISO 7609:1985 Kenya Standard—Essential oils—Analysis by gas chromatography on capillary columns—General method
KS ISO 7660:1983 Kenya Standard—Essential oils—Determination of ester value of oils containing difficult-to-saponify esters
KS ISO 8432:1987 Kenya Standard — Essential oils— Analysis by high performance liquid chromatography—General method
KS ISO 875:1999 Kenya Standard—Essential oils—Evaluation of miscibility in ethanol
KS ISO 22716:2007 Kenya Standard — Cosmetics — Good Manufacturing Practices (GMP)—Guidelines on Good Manufacturing Practices
KS ISO 17516:2014 Kenya Standard—Cosmetics —Microbiology — Microbiological limits
KS ISO 16128-1:2016 Kenya Standard—Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients and products—Part 1: Definitions for ingredients
Services
KS ISO 9355-1:1999 Kenya Standard—Ergonomics—Requirements for the design of displays and control actuators—Part 1: Human interactions with displays and control actuators
KS ISO 9886:2004 Kenya Standard—Ergonomics—Evaluation of thermal strain by physiological measurements
KS ISO 9920:2007 Kenya Standard—Ergonomics of the thermal environment estimation of thermal insulation and water vapour resistance of a clothing ensemble
KS ISO 9921:2003 Kenya Standard—Ergonomics—Assessment of speech communication
KS ISO/TR 22411:2008 Kenya Standard—Ergonomics—Data and guidelines for the application of KS ISO/IEC GUIDE 71 to products and services to address the needs of older persons and persons with disability
KS ISO 24504: 2014 Kenya Standard—Ergonomics—Accessible design sound pressure levels of spoken announcements for products and public address systems
KS ISO/TR 12295:2014 Kenya Standard—Ergonomics—Application document for international standards on manual handling (ISO 11228- 1, ISO 11228 -2 and ISO 11228 -3) and evaluation of static working postures (ISO 11226)
KS ISO/TS 20646:2014 Kenya Standard—Ergonomics—Guidelines for the optimization of musculoskeletal workload
KS 2048-2:2010 Kenya Standard—Occupational noise management — Specification — Part 2 Measurement and assessment of noise emission and exposure
KS ISO 9921:2003 Kenya Standard—Ergonomics—Assessment of speech communication
KS ISO 9886:2004 Kenya Standard—Ergonomics—Evaluation of thermal strain by physiological measurements
KS ISO/TR 22411:2008 Kenya Standard—Ergonomics—Data and guidelines for the application of KS ISO/IEC GUIDE 71 to products and services to address the needs of older persons and persons with disabilities
KS ISO 9920:2007 Kenya Standard—Ergonomics of the thermal environment—Estimation of thermal insulation
KS ISO 1271:1983
KS ISO 1279:1996
KS ISO 279:1998
KS ISO 280:1998
KS ISO 29621:2017
KS ISO 3756:1976
KS ISO 3794:1999
KS ISO 4715:1978
KS ISO 592:1998
KS ISO 7359:1985
2550 THE KENYA GAZETTE 13th May, 2022
and water vapour—Resistance of a clothing ensemble
KS ISO 11399:1995 Kenya Standard—Ergonomics of the thermal environment principles and application of relevant international standards
KS ISO 13857:2008 Kenya Standard—Safety of machinery—Safety distances to prevent hazard zones being reached by upper and lower limbs
KS ISO 12100:2010 Kenya Standard—Safety of machinery—General principles for design risk assessment and risk reduction
KS ISO 14123-1:2015 Kenya Standard—Safety of machinery—Reduction of risks to health resulting from hazardous substances emitted by machinery—Part 1: Principles and specifications for machinery manufacturers
KS ISO 14123-2:2015 Kenya Standard—Safety of machinery—Reduction of risks to health resulting from hazardous substances emitted by machinery—Part 2: Methodology leading to verification procedures
KS ISO 13577-2:2014 Kenya Standard—Industrial furnaces and associated processing equipment —Safety—Part 2: Combustion and fuel handling systems
KS ISO 14122-1:2016 Kenya Standard—Safety of machinery—Permanent means of access to machinery—Part 1: Choice of fixed means and general requirements of access
KS ISO 14122-2:2016 Kenya Standard—Safety of machinery—Permanent means of access to machinery—Part 2: Working platforms and walkways
KS ISO 14122-3:2016 Kenya Standard—Safety of machinery—Permanent means of access to machinery—Part 3: Stairs, stepladders and guard rails
KS ISO 14122-4:2016 Kenya Standard—Safety of machinery—Permanent means of access to machinery—Part 4: Fixed ladders
KS 2713:2017 Kenya Standard—Hazardous installations— Safety and health code of practice
KS ISO 17776:2016 Kenya Standard—Petroleum and natural gas industries offshore production installations—Major accident hazard management during the design of new installations
KS ISO 13577-1:2016 Kenya Standard—Industrial furnaces and associated processing equipment safety—Part 1 General requirements
KS ISO 24504:2014 Kenya Standard—Ergonomics — Accessible design sound pressure levels of spoken announcements for products and public address systems
KS ISO/TR 12295:2014 Kenya Standard—Ergonomics—Application document for International standards on manual handling (ISO 11228-1, ISO 11228-2 and ISO 11228-3) and evaluation of static working postures (ISO 11226)
KS ISO/TR 20646:2014 Kenya Standard—Ergonomics—Guidelines for the optimization of musculoskeletal workload
KS ISO 11064-4:2004 Kenya Standard —Ergonomic —Design of control centres—Part 4: Layout and dimensions of workstations
KS ISO 11226:2000 Kenya Standard—Ergonomics—Evaluation of static working postures
KS ISO 11228-2:2007 Kenya Standard—Ergonomics—Manual handling—Part 2: Pushing and pulling
KS ISO 11228-3:2007 Kenya Standard—Ergonomics—Manual handling—Part 3: handling of low loads at high frequency
KS ISO 11429:1996 Kenya Standard—Ergonomics—Systems of auditory and visual danger and information signals
KS ISO 12894:2001 Kenya Standard—Ergonomics of the thermal environment medical supervision of individuals exposed to extreme hot or cold environments
KS ISO 13406-1:1999 Kenya Standard—Ergonomics—Requirements for work with visual displays based on flat panels—Part 1: Introduction
KS ISO 13406-2:2001 Kenya Standard—Ergonomics—Requirements for work with visual displays based on flat panels—Part 2: Ergonomic requirements for flat panel displays
KS ISO 24500:2010 Kenya Standard — Ergonomics — Accessible design auditory signals for consumer products
KS ISO 24501:2010 Kenya Standard — Ergonomics — Accessible design sound pressure levels of auditory signals for consumer products
KS ISO/TR 9241-100 Kenya Standard—Ergonomics of human system interaction—Part 100: Introduction of standards related to software ergonomics
KS ISO 6385:2016 Kenya Standard—Ergonomics principles in the design of work systems
KS ISO 9241-112:2017 Kenya Standard—Ergonomics of human system interaction—Part 112: Principles for the presentation of information
Leather and Textile
KS EAS 221:2001 Kenya Standard—Woven bags 100 % sisal for clean coffee beans—Specification
KS 1234:1992 Kenya Standard—Specification for bedspreads
KS 1057-2:1990 Kenya Standard—Method of test for complete
filled transport packages bags
KS 1028:1991 Kenya Standard—Methods of test for webbings
and braids
KS 1435:1999 Kenya Standard—Specification for coated
fabrics for shoes
KS 1784:2003
Kenya Standard—Test method for determination of non lint content of cotton
KS 697-1:1990
Kenya Standard—Code of practice for grading of textile materials—Part I: Fabrics
KS 2667:2017
Kenya Standard—Woven table cloth and napery—Specification
KS 2668:2017
Kenya Standard—Duvet quilts and accessory products — Specification
KS 269:1983
Kenya Standard—Method for determination of crease recovery of fabrics
KS 1785:2003
Kenya Standard—Test Method for determination of shrinkage for textile fibres
KS 367:2003 Kenya Standard—Specification for cotton
canvas
KS 1075-2:1991 Kenya Standard—Glossary of terms relating to fishing nets—Part 2: Basic terms and definitions
KS 1465:2005
Kenya Standard—Childrens anoraks— Specification
KS 265:1980 Kenya Standard—Method of determination of
scouring loss in grey and finished cotton textile materials
KS 1077-6:1995 Kenya Standard—Methods of test for coated fabrics—Part 5: Determination of surface drag
13th May, 2022 THE KENYA GAZETTE 2551
KS 1077-18:1998
Kenya Standard—Methods of test for coated fabrics—Part 18: Low temperature impact test adoption
KS 1077-19:1998 Kenya Standard—Methods of test for coated fabrics—Part 19: Determination of low temperature bend test adoption
KS 1077-20:1998
Kenya Standard—Methods of test for coated fabrics—Part 20: Determination of crush resistance
KS 1077-3:1991
Kenya Standard—Methods of test for coated fabrics—Part 3: Determination of bursting strength
KS 1077-5:1994
Kenya Standard—Methods of test for coated fabrics—Part 5: Conditioning of resistance to damage by flexing
KS 1077-9:1991 Kenya Standard—Methods of test for coated fabrics—Part 9: Determination of colour fastness to wet and dry rubbing
KS 1077-2:1991 Kenya Standard—Methods of test for coated fabrics—Part 2: Conditioning of test specimens
KS 1243:1994 Kenya Standard—Specification for three strand hawser laid and four strand shroud laid polyethylene ropes
KS 116:1993 Kenya Standard—Specification for cotton drills KS 506:1994 Kenya Standard—Specification for cotton dish
cloths
KS 1077-14:1996 Kenya Standard—Method of test for coated fabrics—Part 14: Determination of resistance to penetration by water
KS 1151:1992 Kenya Standard—Specification for transfer cones
KS 1140:1993 Kenya Standard—Method for detection and assessment of photochromism
30 .KS 1305-1:2005 Kenya Standard—Mosquito netting — Specification—Part 1: Round mesh cotton netting
KS 1305-2:2005 Kenya Standard—Mosquito netting — Specification—Part 2: Synthetic fibre netting
KS ISO 4921:2000 Kenya Standard—Knitting basic concepts—Vocabulary
KS ISO 15625:2014 Kenya Standard—Silk electronic test method for defects and even
KS ISO 16663-1:2009 Kenya Standard—Fishing nets method of test for the determination ness of raw silk
KS ISO 8388:1998 Kenya Standard—Knitted fabrics types vocabulary of mesh size—Part 1: Opening of mesh
KS ISO 11611:2015 Kenya Standard—Protective clothing for use in welding
KS ISO 14116:2015 Kenya Standard—Protective clothing— Protection against flame limited flame spread materials material assemblies and clothing
KS ISO 22198:2006 Kenya Standard — Textiles — Fabrics — Determination of width and length and allied processes
KS ISO 2286-1:2016 Kenya Standard—Rubber or plastics coated fabrics—Determination of roll characteristics—Part 1: Methods for determination of length width and net mass
KS ISO 675:2014 Kenya Standard—Textiles—Woven fabrics— Determination of dimensional change on commercial laundering near the boiling point
KS ISO 7211-1:1984 Kenya Standard—Textiles—Woven fabrics—Construction methods of analysis—Part 1: Methods for presentation of weave diagram and plans for drafting denting and lifting
KS ISO 7211-2:1984 Kenya Standard—Textiles—Woven fabrics construction methods of analysis—Part 2: Determination of number of threads per unit length
KS ISO 7211-4:1984 Kenya Standard—Textiles—Woven fabrics construction methods of analysis—Part 4: Determination of twist in yarn removed from fabric
KS ISO 7771:1985 Kenya Standard—Textiles—Determination of dimensional changes of fabrics induced by cold water immersion
KS ISO 16322-1:2005 Kenya Standard—Textiles—Determination of spirality after laundering—Part 1 Percentage of wale spirality change in knitted garments
KS ISO 16663-2:2003 Kenya Standard—Fishing Nets—Method of test for the determination of mesh size—Part 2: Length of mesh
KS ISO 3005:1978 Kenya Standard—Textiles—Determination of dimensional change of fabrics induced by free steam
KS ISO 9237:1995 Kenya Standard—Textiles—Determination of permeability of fabrics to air
KS ISO 5084:1996 Kenya Standard—Textiles—Determination of thickness of textiles and textile products
KS ISO 7965-2:199 3 Kenya Standard—Sacks drop test—Part 2 Sacks made from thermoplastic flexible film
KS 210:1982 Kenya Standard—Glossary of textile terms relating to fabrics made from natural fibres
KS 1125-1:1992 Kenya Standard—Specification for carpet backing fabrics—Part 1: Jute fabrics
KS 1127:1992 Kenya Standard—Specification for curtain tapes
KS 208:1981 Kenya Standard—Glossary of textile terms for natural fibres
KS 696:1986 Kenya Standard—Generic names and definitions of natural fibres
KS EAS 246:2001 Kenya Standard—Method for determination of added oil content of sisal or jute yarn or fabric
KS 1786:2003 Kenya Standard—Test method for determination of neps vegetable matter and coloured fibre in wool top
KS 1148-2:199 Kenya Standard—Specification for fabrics for water resistant clothing—Part 2: PVC coated fabrics
KS 748-1:1988 Kenya Standard—Specification for coffee drying cloth—Part 1: Sisal cloth
KS 944-1:2011 Kenya Standard—Specification for woven bags 100% sisal for green tea leaves—Part 1: Three dimensional type
KS 944-2:2011 Kenya Standard—Specification for woven bags 100% sisal for green tea leaves—Part 2: Two dimensional type
KS 133:2013 Kenya Standard—Specification for woven bags natural fibres for milled products
KS 642:2009 Kenya Standard—Sisal packing twines— Specification
KS 2257:2011 Kenya Standard—Specification for woven polylefin sacks bags for animal feeds
KS 2286:2011 Kenya Standard—Specification for polyolefin sacks bags for maize meal
KS 641:1986 Kenya Standard—Glossary of terms for ropes and cordages
2552 THE KENYA GAZETTE 13th May, 2022
KS 1243:1994 Kenya Standard—Specification for three strand hawser laid and four strand shroud laid polyethylene ropes
KS 1142:1992 Kenya Standard—Specification for polyolefin agricultural twines
KS 1143:1993 Kenya Standard—Specification for three strand polyester multifilament ropes
KS 1144:1993 Kenya Standard—Specification for three strand polyamide multifilament ropes
Kenya Standard—Specification for three strand hawser laid and fight strand plaited polypropylene monofilament or film ropes
KS ISO 18264:2016 Kenya Standard—Textile slings—Lifting slings for general purpose lifting operations made from fibre ropes high modulus polyethylene hmpe
KS ISO 10547:2009 Kenya Standard—Polyester fibre ropes—Double braid construction
KS ISO 10554:2009 Kenya Standard—Polyamide fibre ropes—Double braid construction
KS ISO 10556:2009 Kenya Standard—Fibre ropes of polyester — Polyolefin dual fibres
KS ISO 13431:1999 Kenya Standard —Geotextiles and geotextile related products—Determination of tensile creep and creep rupture behaviour
KS ISO 9862:2005 Kenya Standard—Geosynthetics — Sampling and preparation of test specimens
KS ISO 9864:2005 Kenya Standard —Geosynthetics —Test method for the determination of mass per unit area of geotextiles and geotextile related products
KS ISO 13427:2014 Kenya Standard —Geosynthetics —Abrasion damage simulation sliding block test
KS 1394-1:2000 Kenya Standard—Determination of burning behaviour for textile products—Part 1: Determination of ease of ignition vertically Oriented Specimens
KS 2333:2011
Kenya Standard—Hand woven table mats— Specification
KS 2334:2011 Kenya Standard—Hand woven scarves— Specification
KS 2336:2011 Kenya Standard—Hand woven kikoi— Specification
KS 778-2:1987
Kenya Standard—Glossary of terms on spinning and spinning preparation—Part 2: Open-end spinning
KS ISO 10306:2014 Kenya Standard—Textiles—Cotton fibres—Evaluation of maturity by the air flow method
KS ISO 18068:2014 Kenya Standard—Cotton fibres—Test method for sugar content—Spectrophotometry
KS ISO 3074:2014 Kenya Standard—Wool—Determination of dichloromethane-soluble matter in combed sliver
KS 639-1:1989
Kenya Standard—Specification for bandages— Part I: Cotton gauze bandages
KS 630-1:1987 Kenya Standard—Methods for determination of tenacity of textile fibres and yarns—Part 1: Fibres
KS 117-1:2016 Kenya Standard—Woven blankets— Specification
KS 117-6:1990 Kenya Standard—Specification for blankets— Part 6: Non-woven blankets
KS 2715:2017 Kenya Standard—Knitted pile blankets— Specification
KS 1114-2:1993 Kenya Standard—Specification for textured filament yarns—Part 2: Polyamide yarns.
KS ISO 105-Z01:1993 Kenya Standard—Textiles—Tests for colour fastness—Part Z01: Colour Fastness to Metals in The Dye Bath Cromium Salts
KS ISO 105-Z02:1993 Kenya Standard—Textiles—Tests for colour fastness—Part Z02: Colour fastness to metals in the dye bath iron and copper
KS ISO 105-Z04:1995 Kenya Standard—Textiles—Tests for colour fastness—Part Z04: Dispersibility of disperse dyes
KS ISO 105-Z03:1996 Kenya Standard—Textiles—Tests for colour fastness—Part Z03: Intercompatibility of basic dyes for acrylic fibres
KS ISO 105-Z05:1996 Kenya Standard—Textiles—Tests for colour fastness—Part Z05: Determination of the dusting behaviour of dyes
KS ISO 105402:1997 Kenya Standard—Textiles—Tests for colour fastness—Part J02: Instrumental assessment of relative whiteness
KS ISO 105-Z06:1998 Kenya Standard —Textiles —Tests for colour fastness—Part Z06: Evaluation of dye and pigment migration
KS ISO 16373-3:2014 Kenya Standard—Textiles—Dyestuffs—Part 3: Method for determination of certain carcinogenic dyestuffs—Method using triethylamine methanol
KS ISO 105401:1997 Kenya Standard —Textiles —Tests for colour fastness—Part J01: General Principles for Measurement of Surface Colour
KS ISO 16373-2:2014 Kenya Standard—Textiles—Dyestuffs—Part 2: General method for the determination of extractable dyestuffs including allergenic and carcinogenic dyestuffs—Method using pyridine water
KS ISO 18103:2015 Kenya Standard—Superfine woven wool fabric—Labelling requirements for super s code definition
KS ISO 18254-1:2016 Kenya Standard —Textiles —Method for the detection and determination of alkylphenol ethoxylates apeo—Part 1: Method using hplc ms
KS ISO 10617:2010 Kenya Standard—Textiles—Standard data format for colorimetric communication textiles and related measurements
KS ISO 14362-1:2017 Kenya Standard—Textiles—Methods for determination of certain aromatic amines derived from azo colorants—Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres
KS ISO 16373-1:2015 Kenya Standard—Textiles—Dyestuffs—Part 1: General principles of testing coloured textiles for dyestuff identification
KS ISO 1833-11:2017 Kenya Standard—Textiles—Quantitative chemical analysis—Part 11: Mixtures of certain cellulose with certain other fibres method using sulfuric acid
KS ISO 1833-4:2017 Kenya Standard —Textiles — Quantitative chemical analysis—Part 4: Mixtures of certain protein fibres with certain other fibres method using hypochlorite
KS ISO 1833-7:2017 Kenya Standard —Textiles —Quantitative chemical analysis—Part 7: Mixtures of polyamide with certain other fibres method using formic acid
KS ISO 11948-1:1996 Kenya Standard—Urine-absorbing aids—Part 1: Whole-product testing
KS 1145:1992
KS ISO 17299-1:2014 Kenya Standard—Textiles—Determination of deodorant property—Part 1: General principle
KS ISO 17299-2:2014 Kenya Standard—Textiles—Determination of deodorant property—Part 2: Detector tube method
KS ISO 17299-5:2014 Kenya Standard—Textiles—Determination of deodorant property—Part 5: Metal oxide semiconductor sensor method
KS ISO 17299-4:2015 Kenya Standard—Textiles—Determination of deodorant property—Part 4: Condensation sampling analysis
KS ISO 11378-1:2000 Kenya Standard—Textile floor coverings—Laboratory soiling tests—Part 1: Kappasoil test
KS ISO 11377:1997 Kenya Standard—Textile floor coverings—Floor soiling test site set up and soiling evaluation
Kenya Standard—Methods of test for textile floor coverings—Part 3: Determination of delamination strength of secondary backing
Kenya Standard—Methods for test for textile floor coverings—Part 2: Determination of constructional details
Kenya Standard—Methods of test for textile floor coverings—Part 10: Determination of Types of Knots of hand made carpets
Kenya Standard—Methods of test for textile floor coverings—Part 11: Determination of tuft length above woven ground of hand knotted carpets
Kenya Standard — Carpet underlays — Specification Specification
Kenya Standard—Furniture—Assessment of the ignitability of upholstered furniture—Past 2: Ignition source match flame equivalent
Kenya Standard—Furniture—Assessment-of the ignitability of upholstered furniture—Part 1: Ignition source smouldering cigarette
Kenya Standard—Rectangular textile floor coverings —Determinationof dimensions
Kenya Standard—Specification for sliver cans
Kenya Standard--Clesed :circuit _dry machines defusing and cheating of- characteristics characteristics
KS 835-3:1988
KS 835-2:1989
KS 835-10:1997
KS 835-11:1997
KS 1843:2005
KS ISO 8191-2:1988
KS ISO 8191-1:1987
KS ISO 3018:1974
KS 08-894:1991
KS ISO 8232:1988
KS 08-1031:1990
KS 08-1032:1991
KS 08-1118:1991
KS 1119-1:1991
KS 1119-2:1991
KS 1058:1993
KS 08-988:1995
KS 1152-2:1993
Engineering
KS EAS 148-1:2017 K-enyaStandard—Ceatent —Test methods—Part 1: Determination of strength
Kenya Standard—Specification fer flyer bobbins
Kenya Standard cation for cylindrical tubes for open endiminning
Kenya Standard-1p" for tap mut bottom aprons in the-textile indumry
Kenya Standard—Specification for ring travellers—Part I: Metallic travellers
Kenya Standard—Specification for ring travellers—Part 2: Plastic travellers
Kenya Standard—Graphic symbols for textile machinery
Kenya Standard—Specification for sliver and yarn dyeing beams
Kenya Standard--Specification for pings—Part 2: For automatic looms
13th May, 2022 THE KENYA GAZETTE 2553
Kenya Standard— Cement — Test methods—Part 2: Chemical analysis
Kenya Standard — Cement — Test methods—Part 3: Determination of setting times and soundness
Kenya Standard — Cement — Test methods—Part 4: Quantitative determination of constituents
Kenya Standard—Cement—Test methods—Part 5: Pozzolanicity test for pozzolanic cements
Kenya Standard —Cement— Test methods —Part 6: Determination of fineness
Kenya Standard — Cement — Test methods—Part 7: Methods of taking and preparing samples
Kenya Standard —Cement — Test methods —Part 8: Heat of hydration solution method Kenya Standard —Cement — Part 1: Composition, specification and conformity criteria for common cements
Kenya Standard—Cement—Part 2: Conformity evaluation
Kenya Standard—Glossary of terms relating to water sewage and industrial effluents—Part 1 Terms widely used in relation to water sewage and industrial effluents
Kenya Standard—Glossary of terms relating to water sewage and industrial effluents—Part 2 Terms widely used in relation to water supply and sewerage
Kenya Standard—Reuse of treated wastewater—Specification—Part 1: Irrigation
-Kenya Standard—Analysis of wastewater for use in agriculture—Part 1: The modified bailenger method
Kenya Standard—Analysis of water for use in agriculture—Part 2: MPN methods
Kenya Standard—Analysis of wastewater for use in agriculture—Part 3: Membrane filtration method
2569-1:2014 Kenya Standard—Hydraulic road binders—Part 1: Rapid hardening hydraulic road binders composition—Specification and conformity criteria
Kenya Standard—Integral cement waterproofing compounds—Specification
Kenya Standard—Architectural and building drawings— Vocabulary
Kenya Standard—Specification for stabilised soil taroks
Kenya SMadard—Symbols for plumbing, water supply, heating, ventilation and ducting
Kenya Standard—Glossary of terms for pipelines and ducts
Kenya Standard—Glossary of terms for hydraulic engineering and construction work
Kenya Standard—Specification for sawn timber
Kenya Standard—Hot dip aluminium zinc plain and corrugated steel sheets—Specification Kenya Standard—Roofing tiles—Test methods—Part 1: Water absorption test Kenya Standard—Roofing tiles—Test methods—Part 2: Permeability test
Kenya Standard—Specification for joint buildings—General check list of joint functions
KS EAS 148-2:2017
KS EAS 148-3:2017
KS EAS 148-4:2017
KS EAS 148-5:2017
KS EAS 148-6:2017
KS EAS 148-7:2017
KS EAS 148-8:2017
KS EAS 18-1:2017
KS EAS 18-2:2017
KS 2051-1:2007
KS 2051-2:2007
KS 2287-1:2011
KS 2338-1:2011
KS 2338-2:2011
KS '2338-3:2011
KS 2259:2012
KS 102:1984
KS 1070:1993
KS 1 0:1984
KS 1497:2001
KS 1541:1999
KS 17:1986
KS 1810:2003
KS 1937-1:2006
KS 1937-2:2006
KS 2371:1994
2554 THE KENYA GAZETTE 13th May, 2022
KS 2675-1:2017
KS 2675-2:2017
KS 299:1983
Kenya Standard—Partitions including matching linings—Part 1 Code of practice for design and installation
Kenya Standard—Partitions including matching linings—Part 2: Specification for performance requirements for strength and robustness including methods of test
Kenya Standard—Specification for wrought aluminium alloys extruded bars round the tube and sections
Kenya Standard—Methods of test for soils for civil engineering purposes—Part 2: Classification related tests
Kenya Standard—Methods of test for soils for civil engineering purposes—Part 4: Compaction related tests
Kenya Standard—Methods of test for soils for civil engineering purposes—Part 5: Compressibility permeability and durability tests
KS 999-2:2001
KS 999-4:2001
KS 999-5:2001
KS 999-6:2001 KS 561-1:1984 Kenya Standard—Fire tests on building materials—Part 1: Non combustibility test
KS 565:1984 Kenya Standard—Specification on general
principles for the verification of the safety of structures
KS 566:1985 Kenya Standard—Specification for fire
reistance tests — Elements of building construction
KS 567:1985 Kenya Standard—Fire resistance tests—Glazed
elements
KS 569:1984 Kenya Standard—Determination for imposed
floor loads loads in production building and warehouses
KS 624:1986 Kenya Standard—Specification for bitumen
roofing felts
KS 657:1988 Kenya Standard—Specification for window
stays fasteners and handles for vertically hinged windows
KS 658:1985 Kenya Standard—Modular coordination— Vocabulary for building construction
KS 681:1991 Kenya Standard—Dimensioning of drawings for buildings
KS 682:1982 Kenya Standard—Specification for oxidized brown bitumen adhesive for roofing purposes
KS 742:1988 Kenya Standard—Code of practice for laying— Part 1: Roofing tiles
KS 754:1987 Kenya Standard—General vocabulary on building and civil engineering
KS 755-1:1988 Kenya Standard—Design loading for buildings—Part 1: Code of practice for imposed loads
KS 770-1:1997 Kenya Standard—Specification for test sieves— Part 1: Test sieves of metal wire cloth
KS 770-2:1997 Kenya Standard—Specification for test sieves— Part 2: Test sieves of perforated metal Plate
KS 770-3:1997 Kenya Standard—Specification for test sieves— Part 3: Test sieves of electroformed sheets
KS 95:2003 Kenya Standard—Specification for natural
aggregates for use in concrete
KS 966:1999 Kenya Standard—Code of practice for anti
termite measures in new buildings constructional measures
KS 97:1982 Kenya Standard—Specification and methods of
test for building limes quicklime and hydrated lime
KS 996-3:1991 Kenya Standard—Specification for joints in
building—Part 3: General check list of joint functions
KS 997:1994 Kenya Standard—Specification for joints in
building fundamental principles of design
KS 999-1:2001 Kenya Standard—Methods of test for soils for
civil engineering purposes—Part 1: General requirements and sample preparation
Kenya Standard—Methods of test for soils for civil engineering purposes—Part 6: Consolidation and permeability tests in hydraulic cells and with pore pressure measurement
KS 999-7:2001 Kenya Standard—Methods of test for soils for civil engineering purposes—Part 7: Shear strength tests total stress
KS 999-8:2001 Kenya Standard—Methods of test for soils for civil engineering purposes—Part 8: Shear strength tests effective stress
KS 999-9:2001 Kenya Standard—Methods of test for soils for civil engineering purposes—Part 9: In Situ tests
KS ISO 12491:1997 Kenya Standard—Statistical methods for quality control of building materials and components
KS ISO 15686-1:2011 Kenya Standard—Buildings and constructed assets service life planning—Part 1: General principles and framework
KS ISO 3443-1:1979 Kenya Standard—Tolerances for building—Part 1: Basic principles for evaluation and specification
KS ISO 3443-2:1979 Kenya Standard—Tolerances for building—Part 2: Statistical basis for predicting fit between components having a normal distribution of sizes
KS ISO 3443-3:1987 Kenya Standard—Tolerances for building—Part 3: Procedures for selecting target size and predicting fit
KS ISO 3443-4:1986 Kenya Standard—Tolerances for building—Part 4: Method for predicting deviations for assemblies and for allocation of tolerances
KS ISO 3443-5:1982 Kenya Standard—Building construction tolerances for building—Part 5: Series of values to be used for specification of telerances
KS ISO 3443-6:1986 Kenya Standard—Tolerances for building—Part 6: General principles for approval criteria control of conformity with dimensional tolerance specifications and statistical control method
KS ISO 3443-7:1988 Kenya Standard—Tolerances for building—Part 7: General principles for approval—Criteria control of conformity with dimensional tolerance—Specifications and statistical control method 2 statistical control methods
KS ISO 3443-8:1989 Kenya Standard—Tolerances for building—Part 8: Dimensional inspection and control of construction work
KS ISO 3881:1997 Kenya Standard—Building construction—Modular coordination stairs and stair openings coordinating dimensions
KS ISO 7737:1986 Kenya Standard—Tolerances for building presentation of dimensional accuracy data
KS ISO 9052-1:1989 Kenya Standard—Acoustics—Determination of dynamic stiffness—Part 1: Materials used under floating floors in dwellings
1 3 i! May, 2022 THE KENYA GAZETTE 2555
KS 1246:1996 Kenya Standard—Specification for soft boards for general purpose
KS 1247:2005 Kenya Standard—Specification for veneer decorative plywood
KS 1249:1996 Kenya Standard—Specification for fibre hardboard
KS 1607:2001 Kenya Standard—Specification for wooden packaging cases
KS 2222:2010 Kenya Standard—Synthetic resin adhesives for plywood—Specification
KS 2226:2010 Kenya Standard—Plywood test method KS 2280:2011 Kenya Standard—Laminate floor coverings
elements with a surface layer based on aminoplastic thermosetting resins— Specification
KS 2281:2011 Kenya Standard—Plywood and composite board Specification
KS 27064:2017 Kenya Standard— Fibreboards — Specification— Part 1: General requirements
KS 2706-2:2017 Kenya Standard— Fibreboards— Specification Part 2: Requirements for dry process boards
KS 301-2:2010 Kenya Standard—Plywood—Specification— Part 2: Marine plywood
KS 301-3:2010 Kenya Standard—Plywood— Specification— Part 3: Shuttering work plywood
KS 982-11:1990 Kenya Standard—Test methods for determination of physical and mechanical properties of wood—Part 11 Ultimate stress in compression parallel to grain
KS EAS 323:2002 Kenya Standard—Specification for wood preservation by means of pressure creosoting
KS 1605:2001 Kenya Standard—Specification for hardwood poles droppers laths guardrail post and spacer blocks
KS 1606:2001 Kenya Standard—Specification for wood blocks for floors
Kenya Standard—Wood preservatives—Part 1: Determination of the effectiveness against lyctus brunneus stephens application by surface treatment laboratory method
Kenya Standard—Wood preservatives—Part 2: Determination of preventive action against recently hatched larvae of hylotrupes bajulus linnaeus laboratory method
Kenya Standard—Wood preservatives—Part 3: Determination of preventive effect on reticulitermes santonensis de feytaud laboratory method
Kenya Standard—Wood preservatives—Part 4: Test method for determining the protective effectiveness against wood destroying basidiomycetes determination of the toxic values laboratory method
Kenya Standard—Wood preservatives—Part 6: Determination of the protective effectiveness against anobium punctatum de geer by egg laying and larval survival application by surface treatment laboratory method
Kenya Standard—Nomenclature of commercial Kenya timbers
Kenya Standard—Wood mosaic parquet—Specification
Kenya Standard—Wood poles for power and telecommunication lines—Specification
KS 562:1987 Kenya Standard—Fire tests on door assemblies—Evaluation of performance of smoke control door assemblies
KS 568:1985 Kenya Standard—Fire resistance tests door and shutter assemblies
KS 656-1:2006 Kenya Standard—Flush door leafs Specification—Part 1: Solid core type
KS 656-2:2006 Kenya Standard—Flush door leafs Specification—Part 2: Cellular and semi solid core tyre
KS 659:1986 Kenya Standard—Classification and measurement of plywood panels and test pieces
KS 771:1991 Kenya Standard—Specification for softwood timber grades for structural use
KS 828-1:2009 Kenya Standard—Structural use of timber—Part 1: Permissible stress design materials and workmanship code of practice
KS 866:1990 Kenya Standard—Test methods for the assessment of resistance of surface of furniture to cold liquids
KS 93:1984 Kenya Standard—Glossary of terms used in timber
KS 982-1:1990 Kenya Standard—Methods of test for determining of physical and mechanical properties of wood—Part I: Moisture content
KS 982-10:1990 Kenya Standard—Methods of test for determination of physical and mechanical properties of wood—Part 10: Resistance to impact identation
KS 982-12:1990 Kenya Standard—Methods of test for determination of physical and mechanical properties of wood—Part 12: Sampling and general requirements
KS 982-2:1990 Kenya Standard—Methods of test for determining of physical and mechanical properties of wood—Part 2: Density
KS 982-3:1990 Kenya Standard—Methods of test for determination of physical and mechanical properties of wood—Part 3: Testing in compression perpendicular to grain
KS 982-4:1990 Kenya Standard—Methods of test for determining of physical and mechanical properties of wood—Part 4: Ultimate strength in static bending
KS 982-5:1990 Kenya Standard—Methods of test for determining of physical and mechanical properties of wood—Part 5: Ultimate tensile stress parallel to grain
KS 982-6:1990 Kenya Standard—Methods of test for determination of physical and mechanical properties of wood—Part 6: Ultimate shearing stress parallel to grain
KS 982-7:1990 Kenya Standard—Methods of test for determination of physical and mechanical properties of wood—Part 7: Impact bending strength
KS 982-8:1990 Kenya Standard — Methods of test for determination of physical and mechanical properties of wood—Part 8: Modulus of elasticity in static bending
KS 982-9:1990 Kenya Standard—Methods of test for the determination of physical and mechanical properties of wood—Part 9: Static hardness
KS EAS 23:2000 Kenya Standard—Timber—Dimensions for coniferous sawn timber cypress and pine sizes of sawn and planed timber—Specification
KS 1804-1:2003
KS 1804-2:2003
KS 1804-3:2003
KS 1804-4:2003
KS 1804-6:2003
KS 19:1976
KS 448:2010
KS 516:2008
KS IEC 60051-1:2016 Kenya Standard—Direct indicating analogue electrical measuring instruments and their accessories—Part 1: Definitions and general requirements common to all parts
KS ISO 2533:1975 Kenya Standard—Standard atmosphere hypsometrical tables
KS IEC 60422:2013 Kenya Standard—Mineral insulating oils in electrical equipment—Supervision and maintenance guidance
KS IEC 60270:2015 Kenya Standard—High-voltage test techniques—Partial discharge measurements
KS IEC 61865: 2001 Kenya Standard—Overhead lines—Calculation of the electrical component of distance between live parts and obstacles—Method of calculation
KS 1868:2007 Kenya Standard—Overhead power lines— Loading tests on structures
KS 1625:2001 Kenya Standard—Specification for voltage bands for electrical installations of buildings
KS 1827:2007 Kenya Standard—Voltage characteristics of electricity supplied by public distribution systems
KS ISO 4190-5:2006 Kenya Standard—Lifts and service lifts (USA: Elevators and dumbwaiters) —Part 5: Control devices signals and additional fittings
KS ISO 4190-2:2001 Kenya Standard—Lifts (US: Elevator) installation—Part 2: Class IV lifts
KS 2169-1:2010 Kenya Standard—Safety rules for the construction and installation of lifts—Part 1: Electric lifts
KS 2291-1:2011 Kenya Standard—Safety escalators and moving walks—Part 1: Construction and installation
KS ISO 4190-3:1982 Kenya Standard—Passenger lifts installations—Part 3: Service lifts class V
KS 1859-3:2010 Kenya Standard—Electrical power transmission and distribution- High-voltage operating regulations—Part 3: Model regulations— Recommended model regulations relating to power systems for operating, access control and supervision of systems that exceed 1000 v, distribution of electricity
KS 1876-1:2010 Kenya Standard—Electrical power transmission and distribution—Overhead power lines for cg editions prevailing in Kenya—Part 1: Code of practice
KS 1587:2007 Kenya Standard—National electrical safety code
KS 1187:1993 Kenya Standard—Specification for metallic clips for electrical wiring
KS 1876-2:2010 Kenya Standard—Electric power transmission and distribution—Overhead power lines for conditions prevailing in Kenya—Part 2: Safety
KS 1877:2010 Kenya Standard—Electrical power transmission and distribution—Guidelines for the application design planning and construction of medium voltage overhead power lines up to and including 22 Kv using wooden pole structures and bare conductors
KS 1878-0:2010
KS 1878-1:2010
Kenya Standard—Electrical power transmission and distribution—Guidelines for the provision of electrical distribution networks in residential areas—Part 0: Definitions
Kenya Standard—Electrical power transmission and distribution—Guidelines for the provision Of electrical distribution networks in residential areas—Part 1: Planning and design of distribution systems
2556 THE KENYA GAZETTE 13th May, 2022
KS EAS 24:2000 Kenya Standard—Timber industry—Glossary of terms
KS EAS 276:2007 Kenya Standard—Timber—Determination of volumetric swelling
KS EAS 322:2002 Kenya Standard—Wood poles and blocks for power and telecommunication lines—Specification
KS EAS 325:2002 Kenya Standard—Wood preservatives and treated timber—Guide to sampling and preparation of wood preservatives and treated timber for analysis
KS ISO 13061-10:2017 Kenya Standard—Physical and mechanical properties of wood—Test methods for small clear wood specimens—Part 10: Determination of impact bending strength
KS ISO 13061-11:2017 Kenya Standard—Physical and mechanical properties of wood—Test methods for small clear wood specimens—Part 11: Determination of resistance to impact indentation
KS ISO 13061-12:2017 Kenya Standard—Physical and mechanical properties of wood—Test methods for small clear wood specimens—Part 12: Determination of static hardness
KS ISO 13061-15:2017 Kenya Standard—Physical and mechanical properties of wood—Test methods for small clear wood specimens—Part 15: Determination of radial and tangential swelling
KS ISO 13061-16:2017 Kenya Standard—Physical and mechanical properties of wood—Test methods for small clear wood specimens—Part 16: Determination of volumetric swelling
KS ISO 13061-17:2017 Kenya Standard—Physical and mechanical properties of wood—Test methods for small clear wood specimens—Part 17: Determination of ultimate stress in compression parallel to grain
KS ISO 1804:1999 Kenya Standard—Door—Terminology KS ISO 18100:2017 Kenya Standard—Timber structures—Finger
jointed timber—Manufacturing and production—Requirements
KS ISO 6612:1999 Kenya Standard—Windows and door height windows—Wind resistance test
KS ISO 8248:1999 Kenya Standard—Windows and door height windows—Mechanical test
KS ISO 8269:1999 Kenya Standard—Specification for door and doorsets—Static loading test
KS ISO 8270:1985 Kenya Standard— Doorsets soft heavy —Body impact test
KS ISO 8272:1999 Kenya Standard—Specification for doorsets—Air permeability test
KS ISO 8273:1999 Kenya Standard—Specification for dpor and doorsets-Standard atmospheres for testing the performance of doors and doorsets placed between different climates
KS ISO 8275:1999 Kenya Standard—Specification for doorsets Vertical load test
KS ISO 8375:2017 Kenya Standard—Timber structures glued laminated timber—Test methods for determination of physical and mechanical properties
Electrotechnical
KS IEC 60050-881:1983 Kenya Standard—International Electrotechnical Vocabulary Chapter 881: Radiology and radiological physics
13th May, 2022 THE KENYA GAZETTE 2557
Kenya Standard—Electrical power transmission and distribution—Guidelines for the provision of electrical distribution networks in residential areas—Part 2-3: Preferred methods and materials for the installation
Kenya Standard—Electrical power transmission and distribution—Guidelines for the provision of electrical distribution networks in residential areas—Part 3: Overhead distribution in very low, low and moderate consumption areas, including rural areas and informal settlements
Kenya Standard—Electrical power transmission and distribution—Overhead power lines installation of line conductors
Kenya Standard—Electrical power transmission and distribution—Code of practice for animal deterrents for electric power supply substations
Kenya Standard—Electric power transmission and distribution—Energized power lines maintenance methods
Kenya Standard—Electrical power transmission and distribution—High voltage operating regulations—Part 2: Voltage colour coding diagrammatic displays in control rooms colour coding for wall mounted operating diagrams and electronic displays relating to the generation, transmission and distribution of electricity
Kenya Standard—Electrical power transmission and distribution—High voltage operating regulations—Part 5: Standard procedure and terminology for the issuing of operating instructions
Kenya Standard—Electricity supply quality of supply—Part 1: Minimum standards
Kenya Standard—Electricity supply quality of supply—Part 2: Reporting Guidelines
Kenya Standard—Electricity supply quality of supply—Part 3: Voltage characteristics compatibility levels limits and assessment methods
KS ISO 6490-2:1983 Kenya Standard—Analysis of animal feeding stuffs—Determination of calcium content—Part 2: Atomic Absorption Spectrometric Method, withdrawn without replacement
KS ISO 6495:1999 Kenya Standard— Animal feeding stuffs—Determination of water soluble chlorides content to be replaced by KS ISO 6495-1:2015
KS 2358:2012 Kenya Standard—Maize gluten meal Specification, to be replaced by KS EAS 232:2020
KS 785:2012 Kenya Standard—Specification for bone meal, to be replaced by KS EAS 231:2020
KS 954:2012 Kenya Standard—Specification for maize gluten feed, to be replaced by KS EAS 232:2020
KS CAC/MRL 2:2017 Kenya Standard—Maximum Residue Limits (MRLs) and Risk Management Recommendations (RMRs) for residues of veterinary drugs in foods, to be replaced by KS CAC/MRL 2:2018
Kenya Standard—Maize—Determination of moisture content (on milled grains and on whole grains), to be replaced by KS ISO 6540:2021
Kenya Standard—coal and coke—Calculation of analyses to different bases, to be replaced by KS ISO 1170:2020
5163:2005 Kenya Standard—Petroleum products — Determination of knock characteristics of motor and aviation fuels —Motor method, to be replaced by KS ISO 5163:2014
Kenya Standard—Petroleum products—Determination of knock characteristics of motor fuels—Research method, to be replaced by KS ISO 5164:2014
Kenya Standard—Fluid power systems and components—Vocabulary, to be replaced by KS ISO 5598:2020
Kenya Standard—Petroleum and related products from natural or synthetic sources—Determination of pour point, to be replaced by KS ISO 3016:2019
KS 1878-2-3:2010
KS 1878-3:2010
KS 1883:2010
KS 1902:2010
KS 1917:2010
KS 1859-2:2010
KS 1859-5:2010
KS 2236-1:2010
KS 2236-2:2010
KS 2236-3:2010
KS ISO 6540:1995
KS ISO 1170:1977
KS ISO
KS ISO 5164:2005
KS ISO 5598:2008
KS ISO 3016:1994
KS 2236-4:2010 Kenya Standard—Electricity supply quality of supply—Part 4: Application guidelines for utilities
KS 662-3:2001 Kenya Standard—Kenya wiring regulations— Part 3: Assessment of general characteristics
KS 662-4:2000 Kenya Standard—Kenya wiring regulations— Part 4: Protection for safety
KS IEC 60670-1:2015 Kenya Standard—Boxes and enclosures for electrical accessories for household and similar fixed electrical installations—Part 1: General requirements
The following standards are hereby withdrawn forthwith;
Kenya Standard—Tea industry—Code of practice, to be replaced by KS 2128:2022
Kenya Standard—Tea—Raw material for extraction—Specification, to be replaced by KS 2404:2022
Kenya Standard—Specification for baker's yeast, to be replaced by KS EAS 997:2020
Kenya Standard—Dairy cattle feed premix — Specification, to be replaced by KS 2500: 2022
Kenya Standard—Poultry feed premixes — Specification, to be replaced by KS 2508: 2022
Kenya Standard—Glossary of terms for animal feedstuffs, to be replaced by KS ISO 20588 :2019
KS ISO 8216-1:2005 Kenya Standard—Petroleum products—Fuels (class F) classification—Part 1: Categories of marine fuels to be replaced by KS ISO 8216-1:2017
KS ISO 8217:2005 Kenya Standard—Petroleum products —Fuels (class F)—Specifications of marine fuels, to be replaced by KS ISO 8217:2017
12156-1:2016 Kenya Standard—Diesel fuel—Assessment of lubricity using the high-frequency reciprocating rig (HFRR)—Part 1: Test method, to be replaced by KS ISO 12156-1:2018
12156-2:2007 Kenya Standard—Diesel fuel—Assessment of lubricity using the high-frequency reciprocating rig (11FRR)—part 2: Limit, to be replaced by KS ISO 12156-2:2017
12917-1:2002 Kenya Standard—Petroleum and liquid petroleum products—Calibration of horizontal cylindrical tanks—Part 1: Manual methods, to be replaced by KS ISO 12917-1:2017
13357-1:2002 Kenya Standard—Petroleum products—Determination of the filterability of lubricating oils—Part 1: Procedure for oils in the presence of water, to be replaced by KS ISO 13357-1:2017
KS ISO 13357-2:2005 Kenya Standard—Petroleum products—Determination of the filterability of lubricating oils—Part 2: Procedure for dry oils, to be replaced by KS ISO 13357-2:2017
KS 2128:2015
KS 2404:2015
KS 684:1988
KS 2500: 2014
KS 2508: 2014
KS 1651:2000
KS ISO
KS ISO
KS ISO
KS ISO
KS ISO 3405:2011
KS ISO 3924:2016
KS ISO 4264:2007
KS ISO 5165:1998
KS ISO 6246:1995
KS ISO 384:1978
Kenya Standard—Petroleum products—Determination of sulfur content of automotive fuels— Ultraviolet fluorescence method, to be replaced by KS ISO 20846:2019
Kenya Standard—Petroleum products and lubricants—Determination of cone penetration of lubricating greases and petrolatum, to be replaced by KS ISO 2137:2020
Kenya Standard—Petroleum and related products from natural or synthetic sources—Determination of cloud point, to be replaced by KS ISO 3015:2019
Kenya Standard—Petroleum products—Transparent and opaque liquids—Determination of kinematic viscosity and calculation of dynamic viscosity, to be replaced by KS ISO 3104:2020
Kenya Standard—Petroleum and related products from natural or synthetic sources—Determination of distillation characteristics at atmospheric pressure, to be replaced by KS ISO 3405:2019
KS ISO 20846:2004
KS ISO 2137:2007
KS ISO 3015:1992
KS ISO 3104:1994
Kenya Standard—Petroleum products—Determination of boiling range distribution—Gas
chromatography method, to be replaced by
KS ISO 3924:2019
Kenya Standard—Petroleum products — Calculation of cetane index of middle-distillate fuels by the four variable equation, to be replaced by KS ISO 4264:2018
Kenya Standard—Petroleum products—Determination of the ignition quality of diesel fuels —Cetane engine method, to be replaced by KS ISO 5165:2020
Kenya Standard—Petroleum products—Gum content of fuels—Jet evaporation method, to be replaced by KS ISO 6246:2017
Kenya Standard—Laboratory glass and plastics ware—Principles of design and construction of volumetric instruments, to be replaced by KS ISO 384:2015
Kenya Standard—Laboratory glassware — Boiling flasks with conical ground joints, to be replaced by KS ISO 4797:2015
Kenya Standard— Glassware — Hydrolytic resistance of the interior surfaces of glass containers—Part 1: Determination by titration method and classification, to be replaced by KS ISO 4802-1:2016
Kenya Standard—Glassware—Hydrolytic resistance of the interior surfaces of glass containers—Part 2: Determination by flame spectrometry and classification, to be replaced by KS ISO 4802-2:2016
KS I Kenya Standard—Laboratory glassware—Filter flasks, to be replaced by KS ISO 6556:2012
KS 8 _ Kenya Standard—Laboratory glassware — Borosilicate glass tubing, to be replaced by KS ISO 4803:2021
KS ISO
KS ISO
10545-10:1995 Kenya Standard—Ceramic tiles—Part 10: Determination of moisture expansion, to be replaced by KS ISO 10545-10:2021
10545-15:1995 Kenya Standard—Ceramic tiles—Part 15: Determination of lead and cadmium given off by tiles, to be replaced by KS ISO 10545-15:2021
KS ISO 4797:2004
KS ISO 4802-1:1988
KS ISO 4802-2:1998
SO 6556:1981
ISO 4803:197
2558 THE KENYA GAZETTE 13th May, 2022
KS IEC 60068-1:1988 Kenya Standard—Environmental testing—Part 1: General and guidance, to be replaced by KS IEC 60068-1:2013
KS ISO 91-2:1991 Kenya Standard—Petroleum and related products—Temperature and pressure volume correction factors, to be replaced with KS ISO 91:2017
KS EAS 31:2013 Kenya Standard—Laundry soap—Specification, to be replaced by KS EAS 31:2021
KS EAS 294:2001 Kenya Standard—Scouring powder— Specification to be replaced by KS EAS 294:2021
KS ISO 5667-10:1992 Kenya Standard—Water quality —Sampling — Part 10: Guidance on sampling of waste waters, to be replaced by KS ISO 5667-10:2020
KS ISO 5667-1:1980 Kenya Standard—Water quality — Sampling — Part 1: Guidance on the design of sampling programmes, to be replaced by KS ISO 5667-1:2020
KS ISO 5667-3:2003 Kenya Standard —Water quality— Sampling — Part 3: Guidance on the preservation and handling of water samples, to be replaced by KS ISO 5667-3:2018
KS ISO 5667-6:2005 Kenya Standard—Water quality - Sampling—Part 6: Guidance on sampling of rivers and streams, to be replaced by KS ISO 5667-6:2014
KS ISO 7899-2:1999 Kenya Standard—Specification for water quality—Detection and enumeration of faecal streptococci—Part 2: Method by membrane filtration, to be replaced by KS ISO 7899-2:2000
KS ISO 10703:1997 Kenya Standard — Water quality— Determination of the activity concentration of radionuclides by high resolution gamma ray spectrometry, to be replaced by KS ISO 10703:2021
KS ISO 11260:1994 Kenya Standard—Soil quality—Determination of effective cation exchange capacity and base saturation level using barium chloride solution, to be replaced by KS ISO 11260:2018
KS ISO 1272:1999 Kenya Standard—Essential oils—Determination of phenols content, to be replaced by: KS ISO 1272:2000
KS ISO 210:1999 Kenya Standard—Essential oils—Packing, to be replaced by KS ISO/TS 210:2014
KS ISO 211:1999 Kenya Standard—Essential oils—Labelling and marking containers, to be replaced by KS ISO/TS 211:2014
KS ISO 212:1999 Kenya Standard—Essential oils—Sampling, to be replaced by KS ISO 212:2007
KS ISO 3218:1999 Kenya Standard—Essential oils—Principles of nomenclature, to be replaced by KS ISO 3218:2014
KS ISO 3523:1976 Kenya Standard—Oil of Cananga (Cananga odorata (Lam) Hook. f. et Thomson, forma macmphylla), to be replaced by KS ISO 3523:2002
KS ISO 3524:1977 Kenya Standard—Oil of cinnamon leaf, Sri Lanka type (Cinnamomum zeylanicum Blume)], to be replaced by KS ISO 3524:2003
KS ISO 3525:1979 Kenya Standard-Oil of amyris (Amyris balsanufera L.), to be replaced by KS ISO 3525:2008
KS ISO 3848:2001 Kenya Standard— Essential oil of citronella, Java type, to be replaced by. KS ISO 3848:2016
13th May, 2022 THE KENYA GAZETTE 2559
Kenya Standard—Oil of citronella, Sri Lankan type (Cymbopogon nardus (L.) W. Watson var. lenabatu Stapf.); to be replaced by KS ISO 3849:2003
Kenya Standard—Essential oils — Nomenclature; to be replaced by KS ISO 4720:2018
Kenya Standard—Oil of Cedarwood Virginia Juniperus Virginiana Linnaeus, to be replaced by KS ISO 4724:2004
Kenya Standard—Oil of Cedarwood Texas Juniperus Mexicana Schiede, to be replaced by KS ISO 4725:2004
Kenya Standard—Oil of Palmarosa Cymbopogon Martinii Roxburgh W Watson Var Motia. to be replaced by KS ISO 4727:2021
Kenya Standard—Essential oils—Determination of ester value, to be replaced by: KS ISO 709:2001
Kenya Standard—Cosmetics—Microbiology — Evaluation of the antimicrobial protection of a cosmetic product, to be replaced by: KS ISO 11930:2019
Kenya Standard—Textiles—Reusable sanitary towels—Specification, to be replaced by KS 2925:2022
Kenya Standard—Specification for ladies knitted briefs, to be replaced by KS 525:2022
Kenya Standard--Specification for standard wool adjacent fabric, to be replaced by KS ISO 105-F01:2001
Kenya Standard-- Method for determination of added oil content of sisal or jute yarn of fabric, to be replaced by KS EAS 246:2001
Kenya Standard— Standard physical methods of lest for non-woven fabrics—Part 1: Determination of mass per unit area, to be replaced by ISO 9073-1:1989
Kenya Standard—Fabrics—Methods for determination of bursting strength and bursting distension, to be replaced by KS ISO 13938-1:2019 and KS ISO 13938-2:2019
Kenya Standard --Methods for estimation of moisture total size or finish ash fatty matter and determination of water soluble matter in textiles, to be replaced by KS EAS 257:2001
Kenya Standard—Specification for standard adjacent fabrics—Part 6: Secondary acetate, to be replaced by KS ISO 105-F07:2001
Kenya Standard—Specification for standard fabrics—Part 8: Cotton, to be replaced by KS ISO 105-F02:209
KS 525:1984
KS 262:1981
KS 1286:1993
KS 1038-1:1991
KS 631:2005
264:1981
KS 607-6:1990
KS 607-8:1990
KS ISO 3849:1981
KS ISO 4720:1992
KS ISO 4724:1984
KS ISO 4725:1986
KS ISO 4727:1988
KS ISO 709:1999
KS ISO 11930:2012
KS 2925:2020
KS 267-2:1983 Kenya Standard—Conversion tables and methods of designation of textile yams—Part 2: Universal system for designation of linear density of yarns tex system, to be replaced by KS ISO 1144:2016
KS ISO 2076:2010 Kenya Standard-- Textiles —Man made fibres generic names, to be replaced by KS ISO 2076:2021
KS ISO 2307:1990 Kenya Standard—Ropes—Determination of certain physical and mechanical properties, to be replaced by ISO 2307:2019
KS 267-1:1983 Kenya Standard—Conversion tables and methods of designation of textile yarns—Part 1: Method of designation of yarns, to be replaced by KS ISO 1139:1973
KS 1389-2:1998 Kenya Standard— Methods for cotton fibres— Part 2: Determination of micronaire value of cotton fibres, to be replaced by KS ISO 2403:2021
KS ISO 3175-1:2010 Kenya Standard— Textiles — Professional care drycleaning and wetcleaning of fabrics and garments—Part 1: Assessment of performance after cleaning and finishing, to be replaced by KS ISO 3175-1:2017
KS ISO 3175-2:2010 Kenya Standard—Textiles—Professional care drycleaning and wetcleaning of fabrics and garments—Part 2: Procedure for testing performance when cleaning and finishing using tetrachloroethene, to be replaced by KS ISO 3175-2:2017
KS ISO 3175-3:2003 Kenya Standard—Textiles—Professional care drycleaning and wetcleaning of fabrics and garments—Part 3: Procedure for testing performance when cleaning and finishing using hydrocarbon solvents, to be replaced by KS ISO 3175-3:2017
KS ISO 3175-4:2003 Kenya Standard—Textiles—Professional care drycleaning and wetcleaning of fabrics and garments—Part 4: Procedure for testing performance when cleaning and finishing using simulated wetcleaning. To be replaced by KS ISO 3175-4:2018
KS ISO 30023:2010 Kenya Standard — Textiles -- Qualification symbols for labelling work wear to be industrially laundered, to be replaced by KS ISO 30023:2021
KS ISO 6330:2012 Kenya Standard -- Textiles — Domestic washing and drying procedures for textile testing, to he replaced by ISO 6330:2021
KS 125:1979 Kenya Standard-- Method for removal of non fibrous matter from textiles prior to quantitative chemical analysis, to be replaced by KS ISO 1833-1:2020
KS 1137:1993 Kenya Standard---Methods for the instrumental assessment of whiteness, to be replaced by KS ISO 105-J02:1997
KS 1223:1999 Kenya Standard—Method for instrumental assessment of the degree of staining of adjacent fabrics, to be replaced by KS ISO 105-A04:1989
KS EAS 236:2001 Kenya Standard—Textile materials—Tests for colour fastness due to drycleaning, to be replac'%1 by, KS ISO 105-D01:2010
KS EAS 237:2001 Kenya Standard—Textile materials—Tests for colour fastness due to washing, to be replaced
;- W5-C10:2006
i. iiindard—Textiles-- Tests for colour fastness colour fastness to light daylight, to be
KS ISO-B01:2014
KS ISO 13938-1:1999 Kenya Standard--Bursting properties of fabrics--Part 1: Hydraulic method for determination of bursting strength and bursting distension, to be replaced by KS ISO 13938-1:2019
KS ISO 13938-2:1999 Kenya Standard—Textiles—Bursting properties of fabrics—Part 2: Pneumatic method for determination of bursting strength and bursting distension, to be replaced by KS ISO 13938-2:2019
KS 607- i -5:1985 Kenya Standard—Specification for standard adjacent fabrics, to be replaced by KS ISO 10f -F03:2001, KS ISO 105-F04:2001 and KS 105-F05:2001
2560 THE KENYA GAZETTE 13th May, 2022
KS ISO 5323:1984
KS ISO 6442:1999
KS ISO 6443:1999
KS ISO 6444:1999
KS ISO 6445:1999
KS ISO 8274:1999
KS ISO 9379:1989
KS ISO 9381:1999
KS ISO 1954:1999
KS ISO 2074: 1972
KS 154:2000
KS EAS 188:2000
KS 204-1:1992
KS 204-2:1992
KS 1339:1996
KS 1086:1992
KS 637:1986
KS 636:1985
KS 634:1985
KS 635:1985
KS 707-1:1986
KS 708:1986
KS 8:1992
Kenya Standard—Wood flooring and parquet—Vocabulary, to be replaced by KS ISO 5323:2019
Kenya Standard—Door leaves—Measurement of defects of general flatness, to be replaced by KS ISO 6442:2005
Kenya Standard—Door leaves—Measurement of dimensions and of defects of squareness, to be replaced by KS ISO 6443:2005
Kenya Standard—Door leaves—Test of behaviour under humidity variations (successive uniform climates), to be replaced by KS ISO 6444:2005
Kenya Standard—Doors and doorsets —Test of behaviour between two different climates, to be replaced by KS ISO 6445:2005
Kenya Standard—Doorsets—Determination of closing force, to be replaced by KS ISO 8274:2005
Kenya Standard —Doorsets—Repeated opening and closing test, to be replaced by KS ISO 9379:2005
Kenya Standard —Doorsets—Stadc torsion test, to be replaced by KS ISO 9381:2005
Kenya Standard—Plywood—Tolerances on dimensions, to be replaced by KS ISO 1954:2013
Kenya Standard—Plywood—Vocabulary, to be replaced by KS ISO 2074:2007
Kenya Standard—Specification for both plain and fork hoes, to be replaced by KS EAS 132:2021
Kenya Standard — Machetes — Specification, to be replaced by KS EAS 188:2021
Kenya Standard—Specification for shovels—Part 1: Mild steel shovels, to be replaced by KS EAS 1020:2021
Kenya Standard—Specification for shovels—Part 2: Medium steel shovels, to be replaced by KS EAS 1020:2021
Kenya Standard—Specification for hand hammers, to be replaced by KS EAS 1021:2021
Kenya Standard—Specification for hacksaw blades, to be replaced by KS EAS 1022:2021
Kenya Standard—Specification for dial gauges reading in 0.01 mm, to be replaced by KS ISO 463:2006
Kenya Standard—Specification for micrometer caliper for external measurement, to be replaced by KS ISO 3611:2010
Kenya Standard—Specification for vernier calipers reading to 0.1 mm and 0.05 mm, to be replaced by KS ISO 13385-1:2019
Kenya Standard—Specification for vernier calipers reading to 0.02 mm. to be replaced by KS ISO 13385-2:2020
Kenya Standard—Glossary of gear terms—Part 1: Geometrical definitions, to be replaced by KS ISO 1122-1:1998
Kenya Standard—Specification for cylindrical parallel involute gears-system of accuracy to be replaced by KS ISO 21771:2007
Kenya Standard—Units and recommendations for the use of their multiples and of certain other units, to be replaced by KS ISO 80000-1:2009
KS ISO 105-1303:1994 Kenya Standard—Textiles—Tests for colour fastness—Part B03: Colour fastness to weathering outdoor exposure, to be replaced by KS ISO 105-B03:2017
KS ISO 3(171:2005 Kenya Standard—Textiles—Determination of pH of aqueous extract, to be replaced by KS ISO 3175:2020
KS ISO 1833-22:2013 Kenya Standard—Textiles—Quantitative chemical analysis—Part 22: Mixtures of viscose or certain types of cupro or modal or lyocell and flax fibres (method using formic acid and zinc chloride), to be replaced by KS ISO 1833-22:2020
KS ISO 11612:1998 Kenya Standard—Clothing for protection against heat and flame—Test methods and performance requirements for heat protective clothing, to be replaced by KS ISO 11612:2015
KS ISO 20743:2013 Kenya Standard—Textiles—Determination of antibacterial activity of textile products, to be replaced by KS ISO 20743:2021
KS 1038-3:1990 Kenya Standard—Physical methods of test for non-woven fabrics—Part 3: Determination of tensile strength and elongation, to be replaced by KS ISO 9073-3:1989
KS ISO 6530:1990 Kenya Standard — Clothing for limited protection against dangerous liquid chemicals—Resistance to penetration marking, to be replaced by KS ISO 6530:2005
KS 835-1:1988 Kenya Standard—Methods of test for textile floor coverings—Part 1: Determination of dimensions, to be replaced by KS ISO 3018:1974
KS ISO 9405:1990 Kenya Standard—Textile floor coverings—Assessment of changes in appearance, to be replaced by KS ISO 9405:2015
KS ISO 2424:1992 Kenya Standard—Textile floor coverings—Vocabulary, to be replaced by ISO 2424:2007
KS ISO 22156:2004 Kenya Standard—Bamboo structures—Bamboo culms structural design, to be replaced by KS ISO 22156:2021
KS ISO 13786:1999 Kenya Standard—Thermal performance of building components—Dynamic thermal characteristics—Calculation methods, to be replaced by KS ISO 13786:2017
KS ISO 6241:1984 Kenya Standard—Performance standards in buildings—Principles for their preparation and factors to be considered, to be replaced by KS ISO 19208:2016
KS ISO 6514:1982 Kenya Standard—Building construction— Modular coordination—Sub-modular increments, to be replaced by KS ISO 21723:2019
KS ISO 6707-2:1993 Kenya Standard—Building and civil engineering—Vocabulary —Part 2: Contract terms, to be replaced by KS ISO 6707-2:2017
KS ISO 6946:1996 Kenya Standard—Building components and building elements—Thermal resistance and thermal transmittance—Calculation methods, to be replaced by KS ISO 6946:2017
KS ISO 3008:1976 Kenya Standard—Fire resistance tests—Door and shutter assemblies, to be replaced by KS ISO 3008-1:2019
KS ISO 4211:1979 Kenya Standard—Furniture—Assessment of surface resistance to cold liquids, to be replaced by KS ISO 4211-2:2013, KS ISO 4211-3:2013, KS ISO 4211-4:1988 and KS ISO 4211-5:2021
13th May, 2022 THE KENYA GAZETTE 2561
KS IEC 60670-21:2004 Kenya Standard—Boxes and enclosures for electrical accessories for household and similar fixed electrical installations— Part 21: Particular requirements for boxes and enclosures with provision for suspension means, to be replaced by KS IEC 60670-21:2016
KS IEC 60670-22:2003 Kenya Standard—Boxes and enclosures for electrical accessories for household and similar fixed electrical installations—Part 22: Particular requirements for connecting boxes and enclosures, to be replaced by KS IEC 60670-22: 2015
KS IEC 60670-23:2006 Kenya Standard—Boxes and enclosures for electrical accessories for household and similar fixed electrical installations—Part 23: Particular requirements for floor boxes and enclosures, to be replaced by KS IEC 60670-23: 2016
KS IEC 61936-1:2014 Kenya Standard—Power installations exceeding 1 kV a.c.—Part 1: Common rules, to be replaced by KS IEC 61936-1:2021
KS IEC 60034-3:2007 Kenya Standard—Rotating electrical machines—Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines, to be replaced by KS IEC 60034-3:2020
KS IEC 60826:2003 Kenya Standard—Design criteria of overhead transmission lines, to be replaced by KS IEC 60826:2017
KS ISO IEC 11801:2008 Kenya Standard—Information technology generic cabling for customer premises, to be replaced by (KS ISO/IEC 11801-1:2017, (KS ISO IEC 11801-1:2017 Cor 1:2018); KS ISO/IEC 11801-2:2017; KS ISO/IEC 11801 3:2017 (KS ISO IEC 11801-3;2017 Amd I 2021; KS ISO IEC 11801-3;2017 Cor 1;2018) KS ISO/IEC 11801-4:2017 (KS ISO IEC 11801-4:2017 Cor 1 2018); KS ISO/IEC 11801- 5:2017 (KS ISO IEC 11801-5:2017 Cor 1;2018); KS ISO/IEC 11801-6:2017 (KS ISO IEC 11801-6;2017 Cor 1:2018); KS ISO/IEC TR 11801-9901:2014; KS ISO/IEC TR 11801- 9902:2017; KS ISO/1EC TS 11801-9903:2021; KS ISO/IEC TR 11801-9904:2017; KS ISO/IEC TR 11801-9905:2018; KS ISO/IEC TR 11801- 9906:2020; KS ISO/IEC TR 11801-9907:2019; KS ISO/IEC TR 11801-9908:2020; KS ISO/IEC TR 11801-9909:2020; KS ISO/IEC TR 11801- 9910:2020.)
KS 1505-1:2000 Kenya Standard—Specification for radio interference characteristics of overhead power lines and high voltage equipment—Part 1: Description of the phenomenon, to be replaced by KS CISPR/TR 18-1:2017
KS 1505-2:2000 Kenya Standard—Specification for radio interference characteristics of overhead power lines and high voltage equipment—Part 2: Methods of measurement and procedure for determining limits, to be replaced by KS CISPR/TR 18-2:2017
KS 1505-3:1999 Kenya Standard—Specification for radio interference characteristics of overhead power lines and high voltage equipment—Part 3: Code of practice for minimizing the generation of radio noise, to be replaced by KS CISPR/TR 18- 3:2017
KS IEC 61969-1:2011 Kenya Standard—Mechanical structures for electrical and electronic equipment—Outdoor enclosures—Part 1: Design guidelines, to be replaced by KS IEC 61969-1:2020
KS IEC 62053-21:2003 Kenya Standard—Electricity metering equipment (a.c.)—Particular requirements—Part 21: Static meters for AC active energy (classes 0,5, 1 and 2), to be replaced by KS IEC 62053-21: 2020
KS IEC 62053-22:2003 Kenya Standard--Electricity metering equipment—Particular requirements—Part 22 Static meters for AC active energy (classe 0,1S, 0,2S and 0,5S), to be replaced by KS IEC 62053-22: 2020
KS IEC 62053-23:2003 Kenya Standard—Electricity metering equipment (a.c.)— Particular requirements—Part 23: Static meters for reactive energy (classes 2 and 3), to be replaced by KS IEC 62053 23: 2020
KS IEC 62052-11:2003 Kenya Standard—Electricity metering equipment—General requirements, tests and test conditions—Part 11: Metering equipment, to be replaced by KS IEC 62052-11:2020
KS IEC 60282-1:2009 Kenya Standard—High-voltage fuses—Part 1: Current-limiting fuses, to be replaced by KS IEC 60282-1: 2020
KS EAS 378-5-6:2005 Kenya Standard—Low--voltage switchgear and controlgear —Part 5-6: Control circuit devices and switching elements—DC interface for proximity sensors and switching amplifiers (NAMUR), to he replaced by KS IEC 60947-5-6:1999
KS EAS 388-2:2005 Kenya Standard—High-voltage fuses—Part 2: Expulsion fuses, to be replaced by KS IEC 60282-2: 2008
KS ISO/IEC/IEEE 24765:2010 Kenya Standard—Systems and software engineering--Vocabulary, to be replaced by KS ISO/IEC/IEEE 24765:2017
Dated the 4th May, 2022.
BERNARD N. NJIRAINI, PTG No. 2159/21-22 Secretary, National Standards Council.
GAZETTE NOTICE NO. 5476
COUNTY ASSEMBLY OF KIAMBU
THE COUNTY ASSEMBLY OF KIAMBU STANDING ORDERS
SPECIAL SITTING OF THE COUNTY ASSEMBLY OF KIAMBU
PURSUANT to Standing Order 40 (1) and (2) of the County Assembly of Kiambu Standing Orders, it is notified for the information of Members of the County Assembly of Kiambu, that a special sitting of the Assembly shall be held in the Assembly Chamber in the Main Assembly Buildings. Kiambu, on Monday. 16th May. 2022 at 10.00 am. and 2.30 p.m. for purposes of considering the Report of the Budget and Appropriations Committee on the County Government Budget Estimates for the FY 2022/2023 and the Appropriation Bill for the FY 2022/2023.
Dated the 11th May, 2022.
STEPHEN R. NDICHO, MR/3653559 Speaker of the County Assembly.
GAZE' E. NOTICE No. 5477
THE PUBLIC OFFICER ETHICS ACT
(No. 4 of 2003)
THE KAJIADO COUNTY ASSEMBLY POWERS AND PRIVILEGES COMMITTEE PROCEDURES FOR ADMINISTRATION OF PART IV OF THE ACT
IN EXERCISE of the powers conferred by section 33 ( I ) of the Public Officer Ethics Act, 2003, the Kajiado County Assembly Powers and Privileges Committee establishes the following administrative s'rocedures:
THE KAJIADO COUNTY ASSEMBLY POWERS AND PRIVILEGES COMMITTEE PROCEDURES FOR ADMINISTRATION OF PART IV OF THE ACT
PART I —PRELIMINARY Citation
Pr9coim-..-s may be cited as, the Kajiado County A s•.,•• Powers and Ertvileges Committee Procedures for
of Part IV of the Act.
•
2574 THE KENYA GAZETTE 13th May, 2022
NOW ON SALE REPORT OF THE INDEPENDENT
REVIEW ON THE GENERAL ELECTIONS HELD IN KENYA ON 27TH
DECEMBER, 2007 KRIEGLER REPORT
Price: KSh. 1740
SESSIONAL PAPER NO. 3 OF 2009 ON NATIONAL LAND POLICY
Price: KSh. 350
CLINICAL GUIDELINES Price: KSh. 930
CODE OF REGULATION FOR TEACHERS
Price: KSh. 790
SESSIONAL PAPER NO. 10 OF 1965 AFRICAN SOCIALISM AND ITS
APPLICATION TO PLANNING IN KENYA
IMPORTANT NOTICE TO SUBSCRIBERS TO THE KENYA GAZETTE
THE following notes are for the guidance of persons submitting "copy" for inclusion in the Kenya Gazette, Supplement, etc.:
(1) The Kenya Gazette contains Notices of a general nature which do not affect legislation. They are, therefore, submitted to the Government Printer directly.
(2) Legislative Supplement contains Rules and Regulations which are issued by the National or County Governments. Because of this, they must be submitted to the Government Printer through the office of the Attorney—General.
(3) Bill Supplement contains Bills which are for introduction in the National Assembly, Senate or County Assemblies.
(4) Act Supplement contains Acts passed by the National Assembly, Senate or County Assemblies.
All "copy" submitted for publication should be prepared on one side of an A4 sheet no matter how small the Notice is, each page being numbered and should be typed with double spacing. Copy should be clear, legible and contain no alterations.
Particular attention should be paid to the following points: (i) Signature must be supported by rubber—stamping or typing the name
of the signatory in capital letters. (iii) Care should be taken to ensure that all headings to Notices and
references to legislation are up to date and conform with the Revised Edition of the Laws of Kenya.
EXTRACT FROM THE HUMAN RESOURCE POLICIES AND PROCEDURES MANUAL FOR THE PUBLIC SERVICE —
Kenya Gazette A30 (1) All communication for publication in the Kenya Gazette should
reach the Government Printer not later than Friday of the week before publication is desired.
(2) A State Department will be required to meet the cost of advertising in the Kenya Gazette.
It is emphasized that these notes are for guidance only, but it is requested that persons submitting copy for publication first satisfy themselves that such copy is complete in every respect.
SUBSCRIPTION AND ADVERTISEMENT CHARGES With effect from 1st July. 2012, subscription and advertisement fee for the
Kenya Gazette are as follows: SUBSCRIPTION CHARGES:
Annual Subscription (excluding postage in Kenya) Annual Subscription (including postage in Kenya) Annual Subscription (overseas) Half—year Subscription (excluding postage in Kenya) Half—year Subscription (including postage in Kenya) Half—year Subscription (overseas) Single copy without supplements
GAZETTED SUPPLEMENT CHARGES—PER COPY:
hrSh. eta
Up to 2 pages 45 Up to 4 pages 25 Up to 8 pages 46 Up to 12 pages 111) Up to 16 pages 80 Up to 20 pages 95 Up to 24 pages (MO Up to 32 pages 145
Up to 36 pages +65 00 Up to 40 pages 160 00 Each additional 4 pages or part thereof .20 00
ADVERTISEMENT CHARGES:
Full page Full single column Three—quarter column Half column Quarter column or less
KSh. cts. 13,920 00 16,935 00 32,015 00 6,960 00 8,470 00
16,010 00 60 00
Postage in EA. KSh. CO.
60 00 60 00 60 00 60 00 60 00
155 00 115 00 115 00
}depending on weight
KSh. cts.
27,840 00 13,920 00 10,440 00 6,960 00 3,480 00
Price: KSh. 200
COMMISSION OF ENQUIRY INTO POST ELECTION VIOLENCE (CIPEV)
WAKI REPORT Price: KSh. 1800
SESSIONAL PAPER NO. 6 OF 2011 ON NATIONAL CHILDRENS POLICY
Price: KSh. 350
LAND ACT 2012 Price: KSh. 580
FINANCE ACT 2020 Price: KSh. 110
For further information contact: The Government Printer, P.O. Box 30128-00100, Nairobi, Tel. 3317886, 33177887,3317840.
888
888
88
Subscribers and advertisers are advised to remit Imyments by bankers cheques, or deposit using our account at National Bark of Kenya, A/C No. 01001000903100, drawn in favour of "Government Primers". Mpesa: Paybill, Business No. 4079745; A/c No. (a) For Kenya Gazette= 'GAZETTE', (b) to pay for Succession Notice= 'CAUSE NO.' (c) Other payments indicate pro-forma Invoice No. e.g. Ptg 0010-2021/22
Revenue stamps cannot be accepted. Subscriptions and advertisement charges are paid in advance.
MWENDA NJOKA, M.B.S., Government Printer.
e—mail: [email protected] PRINTED AND PUBLISHED BY THE GOVERNMENT PRINTER, NAIROBI