Table of Contents - Group ILS
-
Upload
khangminh22 -
Category
Documents
-
view
0 -
download
0
Transcript of Table of Contents - Group ILS
Table of Contents
SHELTER, SECURITY & WOMEN EMPOWERMENT PROGRAMMES..............................3
Shelter Light....................................................................................................... .............4
Solar PICO PV Kits..........................................................................................................5
Basic Solar Home System (Lights & Charging)..............................................................14
12V Solar Home Systems (TV, Radio, Fan)...................................................................16
Solar Communal & Street Lights....................................................................................18
Solar Lanterns, Torches & Lamps..................................................................................22
Solar Cookers.................................................................................................................29
Solar Entertainment (for PSHP & LSHS Systems)........................................................35
Solar Cooling Systems...................................................................................................38
Camp Security, Monitoring & Lighting Kits.....................................................................41
WATER, SANITATION AND HYGIENE (WASH PROGRAMMES)
AGRICULTURE, LIVELIHOOD AND ECONOMIC DEVELOPMENT....................................43
Solar Surface Pump Systems.........................................................................................44
Solar Submersible Pump Systems.................................................................................46
Solar Photovoltaic Modules............................................................................................49
Solar Pump System Accessories & Ancillaries...............................................................68
Solar Water Filtration Systems.......................................................................................101
HEALTH, EDUCATION & RURAL ELECTRIFICATION PROGRAMMES.........................108
Solar Medical Kits........................................................................................................109
Solar-Powered Cold Chain - WHO/UNICEF Standards...............................................113
Solar Fridge.................................................................................................................114
Article Dimensions [l x w x h] Weight Article No.
Tent Pole
Illuminated Tent Pole SCS100P Tube 547 x 32 x 28 mm 0,6 kg 391002
Adjustable flux 125/20/4 lm | 15 LEDs | cool white | LiFePO4 3000 mAh | 2 x DC output |
USB adapter cable
Illuminated Tent Pole SCS200P Tube 923 x 32 x 28 mm 0,8 kg 391003
Adjustable flux 200/40/8 lm | 30 LEDs | cool white | LiFePO4 6000 mAh | 2 x DC output |
USB adapter cable
Illuminated Tent Pole SCS200T Telescope 2200 x 32 x 28 mm 1,6 kg 391004
Adjustable flux 200/40/8 lm | 30 LEDs | cool white | LiFePO4 6000 mAh | 2 x DC output |
USB adapter cable | extendible 1,3 – 2,3 m
Module
Solar module 5 W 365 x 182 x 35 mm 0,8 kg 310179
5 W module | 5 VDC | poly crystalline | for SCS tent pole | framed | pull-out stand | 3 m cable
NEW Illuminated Tent Poles Innovative, highly efficient solar illumination integrated in solid tent poles! Solar module quickly charges the built in lithium ion phosphate power pack which will light up your campsite as well as giving you the ability to recharge all your mobile devices via a standard USB port.
Special features Ideal as a tent pole for sun blinds, awnings, cart top awnings, etc.
120 degrees of light distribution 3 light settings Unique multifunctional design Easy and safe to install Excellent battery life
USB adapter for the charging of mobile phones, radios and other consumers
SCS100P/
SCS200P
SCS200T
Solar module
4
Pico PV Kits
Solar Lamp Blow Up The high efficient Phaesun solar lamp Blow Up is ideal for camping, backyards, parties, dorm rooms, roadside assistance, blackouts and much more. During daytime you can charge it and in the night you can use it with three steps of brightness. LEDs deliver up to 15 square feet of light. For use, just pull the mouth piece out of the top and blow it up. On the bottom side, where the solar module is, you find a button to put on the light. Press it and it‘s ready to start! With the practical handle on the top you can use it as a hanging lamp, as
well as a table lamp. Available in different versions.
Article Dimensions [l x w x h] Weight Article No.
Solar Lamp Blow Up Ø 120 x 110 mm 0,10 kg 360128
Transparent | inflatable LED lamp | 10 white LEDs | 0,6 W module | 1000 mAh battery
NEW Solar Lamp Blow Up Disco Ø 120 x 110 mm 0,10 kg 360161
Transparent ribbed | inflatable LED lamp | 5 multicoloured LEDs | 0,6 W module | 1000 mAh battery
NEW Solar Lamp Blow Up Colour Ø 120 x 110 mm 0,10 kg 360162
Transparent | inflatable LED lamp | 10 multicoloured LEDs | 0,6 W module | 1000 mAh battery
Blow Up Colour
Blow Up Disco NEW!
5
NEW Solar Lamp Sonnenglas Decorative solar lamp for perfect illumination for inside and outside use: garden, romantic dinners, camping activities, etc. The solar module and 4 LEDs are integrated in the top cover.
Features Integrated LEDs and battery
Magnetic switch, no moving parts For functional and decorative use Handmade portable glass lantern Glass jar 100 % recyclable
Article Dimensions [l x w x h] Weight Article No.
Solar Lamp Sonnenglas Ø 115 x 180 mm 0,62 kg 360167
28 lm | 0,4 W module | 1,4 Wh battery | 600 mAh | NiMH
NEW Pico PV Lamp Uno 50
Uno 50 is an ultra-affordable entry-level solar LED light solution. An all-in-one solar lamp for complete energy independence.
Features 50 lumen brightness solar LED light All-in-one re-chargeable solar light Ultra cost-efficient design Comfortable 2 x light mode slider User-friendly multi-flex design Solid engineering & durable materials
Article Dimensions [l x w x h] Weight Article No.
Pico PV Lamp Niwa Uno 50 268 x 35 x 130 mm 280 g 350092
Adjustable 50/20 lm | 0,5 W module | 1,2 Wh battery | 400 mAh | LiFePO4
6
NEW Modular Solar System
Home 200 X2
mid-range starter system of Modular-Solar-Systems (MSS). Each lamp offers impressive 100 Lumen brightness which brings total system brightness to 200 lumen. They are water and dust proof and can also be installed as outdoor lamps serving as security
lights. Lamps can be individually dimmed (3 x light modes for each lamp) according to the situation of use, room size and sunshine duration at a particular day. Dimming takes place conveniently at a wall switch for each lamp.
NEW Pico PV Lamp Multi 300 XL
It is a powerful portable light and phone charging solar product for indoor and outdoor usage with an extra ultra bright light mode for emergency situations.
Features 300 lumen brightness solar LED light
Mobile phone charging Comfortable 5 x light mode slider Durable long lifetime solar PV panel Dust & water protected
Article Dimensions [l x w x h] Weight Article No.
Home 200 X 315 x 345 x 303 mm 3,25 kg 350091
2 lamps adjustable 100/50/20 lm | 5 W module | 3 x 5 V USB | 9,6 Wh battery| 3000 mAh | LiFePO4
Article
Pico PV Lamp Niwa Multi 300 XL 238 x 85 x 270 mm 1,17 kg 350093
Adjustable 300/200/100/50/10 lm| 3 W module | 5 V USB | 9,6 Wh battery | 3000 mAh | LiFePO4
7
Article Dimensions [l x w x h] Weight Article No.
JouLite Kits
JouLite Kit 1 550 g 390986
1 lamp adjustable 150 – 15 lm (blue) | 1,8 W module | 8,3 Wh battery | 2250 mAh | 1 x bottle stand | 1 x phone charge cable with USB & micro USB
JouLite Kit 2 650 g 390987
2 lamps adjustable 150 – 15 lm (2 colours) | 1,8 W module | 8,3 Wh battery | 2250 mAh | 1 x bottle stand | 2 x phone charge cable with USB & micro USB
JouLite Lamp (without solar module)
1 lamp adjustable 150 – 15 lm | blue 152 x 55 mm 97 g 390988
JouLite 150
JouLite Kit 1
Modul
Ulitium 200
T-lite
Hub4 Junction Box
Hub4 Junction Box
Wall Dock
Joule StickPhone Stick
Phone Stick
Phone Adapter
JouLite
Product Range
NEW JouLite JouLite is a multifunctional lamp. Torch, mo-bile phone charger and table lamp: all in one! The lamp can be charged with a 5 V solar module or a USB cable.
Features: Light output of 150 lumen
Innovative product design: multifunctional, robust and water proof
Dimmable light: Up to 60 h of light with a fully charged battery
Charging hub for mobile phones
8
Article Dimensions [l x w x h] Weight Article No.
T-lite Kits
T-lite 180 1 Lightkit 195 x 125 x 293 mm 1,7 kg 350067
1 lamp adjustable 180 – 18 lm (white)| 3 W module | 12 VDC | 16 Wh battery | 4500 mAh | LiCoO2
T-lite 180 2 Lightkit 290 x 125 x 293 mm 2,6 kg 350068
2 lamps adjustable 180 – 18 lm (white) | 6 W module | 12 VDC | 16 Wh battery | 4500 mAh | LiCoO2
T-lite 180 3 Lightkit 400 x 125 x 293 mm 3,6 kg 350069
3 lamps adjustable 180 – 18 lm (white) | 9 W module | 12 VDC | 16 Wh battery | 4500 mAh | LiCoO2
T-lite 180 4 Lightkit 510 x 125 x 293 mm 4,7 kg 350070
4 lamps adjustable 180 – 18 lm (white) | 12 W module | 12 VDC | 16 Wh battery | 4500 mAh | LiCoO2
T-lite Unit (without solar module)
T-lite 180 60 kJ LED Lighting Unit 100 x 228 mm 0,2 kg 350048
Adjustable 180 – 18 lm | 16 Wh battery | 4500 mAh | LiCoO2 | IP54
T-lite The T-lite is an ideal illumination kit and can be used whether as a ceiling lamp, table lamp, or as a manageable torch – with eight LEDs it reaches a considerably high illumination level of 180 lumen. Highly efficient integrated lithium cobalt batteries provide a long luminous period. In contrast to the Ulitium lamp, its counterpart, the T-lite is equipped with a simple touch button and included dimming function. T-lite is available as complete kit with corresponding solar module or as single lamp. The simple Plug-and Play-technology provides highest flexibility.
9
Article Dimensions [l x w x h] Weight Article No.
Ulitium Kits
1 Ulitium 200 Lightkit white 195 x 125 x 293 mm 1,7 kg 303205
1 lamp adjustable 240 – 25 lm (white) | 3 W module | 12 VDC | 16 Wh battery | 4500 mAh | LiCoO2
2 Ulitium 200 Lightkit white 290 x 125 x 293 mm 2,6 kg 303206
2 lamps adjustable 240 – 25 lm (white) | 6 W module | 12 VDC | 16 Wh battery | 4500 mAh | LiCoO2
3 Ulitium 200 Lightkit white 400 x 125 x 293 mm 3,6 kg 303207
3 lamps adjustable 240 – 25 lm (white) | 9 W module | 12 VDC | 16 Wh battery | 4500 mAh | LiCoO2
4 Ulitium 200 Lightkit white 510 x 125 x 293 mm 4,7 kg 303208
4 lamps adjustable 240 – 25 lm (white) | 12 W module | 12 VDC | 16 Wh battery | 4500 mAh | LiCoO2
Ulitium Unit (without solar module)
Ulitium 200 Ø 110 x 170 mm 350 g 303106
Adjustable 240 – 25 lm | 16 Wh battery | 4500 mAh | LiCoO2 | IP54
Ulitium These PicoPV kits are the low-cost and maintenance-free alternative for standard Solar Home Systems. The popular Ulitium Kits include one to four high efficient LED lamps with integrated lithium cobalt battery providing a light output of 240 lumen, the perfectly fitting solar module and a distribution box. It is easy to install and can be easily expanded according to the needs of the user with more lamps, cell phone charger or JouleStick. All you need for lighting your home in just one box! Ulitium-lamp: With integrated LiCoO
2 energy
storage.
Switch Position:
Light Output 240 Lumen 120 Lumen 25 Lumen
Energy Storage 16 Wh | 4500 mAh
Energy Consumption 2,8 W 1,4 W 0,3 W
Light Hours 6 Hours 12 Hours 60 Hours
10
NEW Solar Backpack Packr Packr is a revolutionary solar integrated backpack, able to keep anyone charged up while they’re on the move. Equipped with a flexible and incredibly rugged integrated 3 W solar panel, the Packr can power up most smartphones in under five hours and can charge almost any portable USB-enabled device. Made with solar-on-plastic technology, the solar panel adds minimal weight while remaining flexible.
Article Dimensions [l x w x h] Weight Article No.
Packr Green 493 x 381 x 165 mm 0,9 kg 391026
3,5 W module | 0,6 Amp output (USB Port) | colour green black
Packr Orange 493 x 381 x 165 mm 0,9 kg 391027
3,5 W module | 0,6 Amp output (USB Port) | colour orange black
Packr Camo 493 x 381 x 165 mm 0,9 kg 391028
3,5 W module | 0,6 Amp output (USB Port) | colour camouflage
Weight
11
NEW Portable Solar Chargers Kickr The Kickr is an ultra-lightweight, weather-resistant solar charger that enables you to keep your small USB devices charged up at all times.
Features: Extremely lightweight, flexible and durable
Unique patented technology Kickr II+ with integrated battery
Article Dimensions [l x w x h] Weight Article No.
Kickr I Blue 210 x 190 x 2 mm 0,16 kg 350088
1,5 W module | blue trim
Kickr II+ Black 392 x 191 x 18 mm 0,45 kg 350094
3,0 W module | 5 VDC | 0,6 A | 500 mAh internal battery
Kickr IV BLK 744 x 185 x 2 mm 0,29 kg 350089
6 W module | black
Kickr IV
Kickr II+Kickr I
NEW USB Lights These lamps can be easily connected to every USB power source and give bright light. Best suitable to connect to the Jumpr Accumulator Packs.
Article Dimensions [l x w x h] Weight Article No.
USB Torch Light Black 56 x 27 x 27 mm 230 g 391122
USB enabled LED light | 4 lm
USB Light Wand Black 464 x 10 x 16 mm 45 g 391123
USB enabled 7 LED light wand | 6 lm
USB Torch
USB Light Wand
12
Article Dimensions [l x w x h] Weight Article No.
Jumpr Max Blue 124 x 80 x 18 mm 260 g 340195
Rechargeable battery 10000 mAh | USB | blue
Jumpr Prime 10400 104 x 47 x 27 mm 230 g 340202
Rechargeable battery 10400 mAh | USB | grey w/orange trim
Jumpr Max Blue
Jumpr Prime 10400
NEW Accumulator Packs Jumpr Jumpr is a compact and powerful powerbank to throw in a backpack, a briefcase, or a gym bag while on the go. This portable battery is convenient when you don’t have time to connect to an outlet or get a charge from the sun. It’s lightweight, and compact enough to hold in your hand. Finally, it has dual outputs allows for simultaneous charging so you can keep all your electronics charged up throughout the day.
13
PuraNova TechP.O. Box 390667 Dubai World Central Dubai, [email protected]
Engineered inGermany
PSHSEasy extensionEasy to install
Modern battery technology
BLUE LINE PSHS
PSHS is an autonomous energy system, designed for rural electrification. Several lamps, a phone charger, and a radio are currently available. The built-in USB-port transforms the PSHS in a charging station for many kind of devices, such as mobile phones or MP3-players. Fosera engineers are cons tantly expanding the product range.
Easy extension
systems are the first solar energy systems that can grow with increasing demand: up to four different loads at once can be connected, if the energy demand grows, another fosera system can be connected, by simply adding a sec-cond battery box. Up to four systems will work perfectly synchronized.
Easy to install
systems allow easiest Plug & Play installation. No techni cal skills or spe-cial training are required. Solar modules, loads or extensions can be connected intuitively by only one cable.
High quality components
only uses high quality components in its products to ensure a long and maintenance free product lifetime. The used LiFePO4-battery has a lifetime of up to 10 years, which is up to 6 times longer then lead-acid batteries. The LED as well has a lifetime of more thea 50.000 hrs without any significant reduction in brightness.
www.puranovatech.com 14
Basic Solar Home Systems(lights & Charging)
Engineered inGermany
PSHS 2800 PSHS 4200 PSHS 7000 Solar charging station
System voltage 3.25 V 3.25 V 3.25 V 3.25 V
System capacity 3 Ah 4.5 Ah 7.5 Ah 7.5 Ah
Module peak power 1.5 Wp 2.5 Wp 5.0 Wp 5.0 Wp
Module current 0.34 A 0.58 A 1.15 A 1.15 A
Module technology crystalline silicon
Cable length panel to box
6 m
Cable lenght box to lamp 6 m incl. switch
Max. no. of loads 4 + USB 4 + 2 USB
USB outlet USB 500 mA output 2* USB 500 mA output
Weight 0.39 kg 0.41 kg 0.50 kg 0.45 kg
Dimensions 22x22.4x15 cm 36.6x22.4x15 cm
Operation time
Included Lamps Lamp 3.25V 100, fb 3.25V 50, Adapterset 4
Lamp 3.25V 200, fb 3.25V 100, Adapterset 4
Lamp 3.25V 200, 2x fb 3.25V 100, Adapterset 4
1x fb 3.25V 100, 2x Adapterset 4
Full battery runtime 8.4 hrs 6.3 hrs 7.8 h 33.5 h
www.puranovatech.com
PuraNova TechP.O. Box 390667 Dubai World Central Dubai, [email protected]
15
Engineered inGermany
LSHS
12 V solar home systemModular and Extendable
Multiple appliances availableBattery lifetime of up to 10 years
POWER LINE LSHS
The LSHS is a modular, easy to install 12V solar home system, able to power multiple applian-ces
like a TV, a fan and several lamps.
Easy extension
systems are the first solar home systems that can grow with increasing demand: by just connecting two LSHS with a parallel cable, the system capacity can be extended.
Easy to install
systems allow easiest Plug & Play installation, no technical skills or special training are required. Solar modules, loads or extensions can be connected intuitively.
Multiple applications
LSHS comes with two USB plugs for the universal use of charging devices such as mobile phones or MP3 players. Furthermore, several lamps, a TV, radio and a ceiling fan are available. fosera engineers are constantly expanding the product range.
www.puranovatech.com
16
Engineered inGermany
LSHS 4200
Adavanced Lighting Edition
Nom. system voltage
13 V 13 V
System capacity 4.5 Ah 10,5 Ah
Module peak power 10 Wp 20Wp
Module current 0.59 A 1.2 A
Module technology
crystalline silicon
Lamps included 2x Lamp 12V 200 1x fb lamp 12V 100
2*lamp 400 1*lamp 200
Illuminance 2*180 lm 1x 80 lm
2*300 lm 1*180 lm
Cable length panel - battery box
6 m
Cable length battery box - lamp
6 m, incl. switch
Max no. of loads 4 + 2 USB
USB outlet 2*USB 500 mA output
Operation time
Daily operation time of system incl. lamps
12 hrs 16 hrs
Accessory
all models POWER LINE lamps, TV, radio, ceiling fan
Weight 0.88 kg 1.67 kg
Dimensions 6.7x26.7x16 cm 6.7x26.7x16 cm
With production plants in Thailand, Mozambique, Kenya, Ethiopia and India and several 100,000 systems sold, fosera delivers high quality, durable products adapted to the needs in underelectrified regions of the world.
Modern battery technology
LSHS uses high-quality and long-lasting lithium iron phosphate (LiFePO4) battery technology. Com-bined with our intelligent battery charge management, the battery can be used for many years and is completely maintenance free. Compared to other used batteries, the lithium iron phosphate technology is high-efficient and resistant to capacity losses due to chemical reactions and is environmental-friendly.
www.puranovatech.com
LSHS 9800
Expert Lighting Edition
PuraNova TechP.O. Box 390667 Dubai World Central Dubai, [email protected]
17
From its inception as a research project supported by Singapore-MIT Alliance for Research and Technology in 2012, our mission has been to provide highly efficient technology to make solar lighting feasible in off-the-grid areas.
By providing robust, innovative light technology at affordable prices, we aim to increase safety by combining an infrared motion sensor with LEDs and maintainance free solar power.
Safety after SunsetOur Local Partner
Safety after Sunset
PuraNova TechP.O. Box 390667 Dubai World Central Dubai, [email protected]+971 4 553 4107 www.puranovatech.com
18
Solar Community & Street Lights
FeaturesAdaptive lighting
Theft proof mounting
High efficiency LED’sLong lasting LiFePO4 batteriesIntegrated solar panelMicro-Chip controlled power managementDurable in adverse climate conditions
Why choose COMMLIGHT? Maintainance free Easy installation
for 8 to 10 years without cables
Special bene�tsUnique battery technologyThe COMMLIGHT’s ® LiFePO
4 batteries are
not hazardous, unlike lead acid batteries and have a longer lifespan due to lack of sulphation. The constructive passive cooling reduces the battery temperature and increases lifespan.
Automatic dimmingWith a motion sensor and auto-adjusting brightness, the COMMLIGHT® conserves energy by adjusting the light level when no light is needed.
Warranty2 years regular warranty* 5 years optional warranty*
*including battery
COMMLIGHT 400 / 800 / 800 XL
• Cycle paths
• Walk ways
• Bus stops
• Residential and public property
• Parking lots
COMMLIGHT 1600 / 1600 XL
• Rural roads
• Main roads
Applications
Product type
Lumen brightness
Adaptive lighting
Total weight
Dimensions (mm)
Ideal installation height
Days of autonomy(without sunshine)
400 1600 1600XL
400 1600 1600
YES YES NO
4.7 kg 15 kg
170 x 208 x 430
4 - 5 m
3 days
25 kg
800 800XL
800 800
YES NO
8.1 kg 9.8 kg
187 x 228 x 1120
4 m 6 - 7 m
Phone +971 4 553 4107
www.puranovatech.com
Technical Specification
Product type
Battery technology
System capacity @ C0.1
Illuminance (in bright mode)
Integrated module peak power
External module peak power
Motion sensor control
Daily operation hours
System technology
Colour temperature
Luminaire efficiency
System autonomy
in cloudy weather
Standard system warranty
Extended system warranty
Recommended pole length
Housing materials
IP Protection class
Theft and vandalism protection
Mounting tools included
Pole mounting
Certifications
Dimensions
Weight
COMMLIGHT® 400
LiFePO4
12.8 Ah (3.3 V)
400 lm
10 Wp
-
Yes
4.7 kg
COMMLIGHT® 800
LiFePO4
25.6 Ah (3.3 V)
800 lm
10 Wp
10 Wp
Yes
> 130 lm/Wp
4-5 m height, 35 to 85 mm diameter
2 electroplated steel clamps
430 x 208 x 170 mm
8.1 kg
COMMLIGHT® 800XL
LiFePO4
64.0 Ah (3.3 V)
800 lm
10 Wp
27 Wp
No
9.8 kg
COMMLIGHT® can bring light to virtually any space: streets, walk ways, markets, small businesses, parking lots and
community places. Basically any place where the electric grid is missing or unreliable. It provides an innovative light
technology that is highly reliable independent and robust.
V05.15
12 hours
microprecessor control, automatic switch on/of on sunset/sunrise
5000-6000 K
2 to 5 days depending on location and usage
2 years
5 years
durable aluminium, powder coated
All electronic components IP 65
yes - with vandalism proof aluminium housing and theft proof screws
yes - anti theft screws and mounting tool to the pole are included
CE; EN55015; EN61547
COMMLIGHT® 1600
LiFePO4
10.5 Ah (13.2 V)
1600 lm
40 Wp
-
Yes
15 kg
COMMLIGHT® 1600XL
LiFePO4
27.0 Ah (13.2 V)
1600 lm
40 Wp
40 Wp
No
25 kg
> 140 lm/Wp
6-7 m height, 50 to 90 mm diameter
easy installation with slide-in system
187 x 228 x 1120 mm
PuraNova TechP.O. Box 390667 Dubai World Central Dubai, [email protected]
20
Dimensions
Durable materials
Brightness
COMMLIGHT® 400 / 800 / 800XL
The lights components are housed in a durable aluminium encasing, inished with a powder coating. An auto dimming feature can be activated by a motion sensor that regulates brightness based on activity. COMMLIGHT® 800 / 800 XL / 1600 XL come with an additional solar module of 10 / 20 / 40 Watt.
Lux on streetlevel COMMLIGHT® 400 Lux on streetlevel COMMLIGHT® 800
1085 mm
228 mm
COMMLIGHT® 1600 / 1600XL
COMMLIGHT 1600
Day View Night View
27.0 Ah (13.2 V)
40 Wp
40 Wp
25 kg
21
Engineered inGermany
BOPPortable lamp
Night light function Expandable
BLUE LINE BOP 2.0
The BOP has been designed to be robust and flexible to use: it can be used as a ceiling lamp, portable device or even moun-ted on a wall.
The BOP can be used as well as a porta-ble lamp together with the PSHS or LSHS and can be charged over USB.
High quality components
only uses high quality components in its products to ensure a long and maintenance free product lifetime. The used LiFePO4-battery has a lifetime of up to 10 years, which is up to 6 times longer then lead-acid batteries. The LED as well has a lifetime of more than 50.000 hrs without any significant reduction in brightness.
BOP 2.0
System voltage 3.25 V
System capacity 400 mAh
Module peak power 0.8 Wp
Module current 0.18 A
Module technology crystalline silicon
Illuminance: bright mode 40 lm
Operation time
Daily operating hours 2.5 hrs
Weight 0.1 kg
Dimensions 20x6.3x4.5 cm
22
Solar Lanterns, Torches & Lamps
Engineered inGermany
LAMPSBrilliant Light
Energy efficient Fair Prices
BLUE LINE Lamp
lamps of the BLUE LINE are ceiling lamps, designed to be combined with the BLUE LINE 3,25 V system, such as the PSHS.BLUE LINE lamps are available in 2 versions, each providing different levels of luminosity.
BLUE LINE fb Lamp
The fb Lamps are the smaller version of the ceiling lamps. It allows a flexible lighting service due to its versatility as desk light or as a fixed wall or ceiling light.
BLUE LINE Lamp 3.25V 100
BLUE LINE Lamp 3.25V 200
Lamp Voltage 3.25 V 3.25 V
Lamp Current 240 mA 480 mA
Nominal Power 0.78 W 1.56 W
Illuminance 90 lm 180 lm
Color 5000 K 5000 K
Lifespan @ 5 hrs use per day
27 years 27 years
Cable length box to lamp
6m, incl. switch 6m, incl. switch
Weight 0.33 kg 0.33 kg
Dimensions 18x9.7x19.5 cm 18x9.7x19.5 cm
Efficient fosera Light
Lamps use high-efficient LED technology with a very long lifetime. Based on 5
operating hours per day the LEDs can last up to 27 years.
Easy to Install
systems allow easiest Plug & Play installation. No technical skills or special training are required. Solar modules, loads or extensionscan be connected intuitively by only one cable.
BLUE LINE fb Lamp 3.25V 50
BLUE LINE fb Lamp 3.25V 100
Lamp Voltage 3.25 V 3.25 V
Lamp Current 150 mA 250 mA
Nominal Power 0.8 W 0.39 W
Illuminance 45 lm 75 lm
Color 5000 K 5000 K
Lifespan @ 5 hrs use per day
27 years 27 years
Cable lenght box to lamp
6m, incl. switch 6m, incl. switch
Weight 0.1 kg 0.1 kg
Dimensions 20x6.3x4.5 cm 20x6.3x4.5 cm
BLUELINE
23
Engineered inGermany
LAMPSEfficient light
Easy extensionEasy to install
Modern battery technology Multiple applications
POWER LINE lamp 100, 200 & 400
POWER LINE lamps are high illuminating ceiling lamps, designed to make our customer homes more
comfortable.
POWER LINE Lamp 100
POWER LINE Lamp 200
POWER LINE Lamp 400
Lamp voltage 13 V 13 V 13 V
Lamp current 70 mA 150 mA 250 mA
Nominal power 0.91 W 1.95 W 3.25 W
Light Source 4 LEDs 4 LEDs 8 LEDs
Color Temperature 5000 K 5000 K 5000 K
Illuminance 100 lm 180 lm 300 lm
Cable length 6 m, incl. switch 6 m, incl. switch 6 m, incl. switch
Dimensions 18x9.7x19.5 cm 18x9.7x19.5 cm 18x9.7x19.5 cm
Weight 0.33 kg 0.33 kg 0.33 kg
Tube Light 400
The new tubedesign combined with a dif-fusion technology illuminates rooms uni-formly, ideally for bars, shops and all kind of workspaces, which require bright illumination.
Tube Light 400
Lamp voltage 13 V
Lamp current 270 mA
Nominal power 3.51 W
Light Source 12 LEDs
Color Temperature 5000 K
Illuminance 400 lm
Cable length 6m, with integrated switch
Dimensions 41x3x3.5 cm
Weight 0.35 kg
POWERLINE
24
Engineered inGermany
LAMPSEfficient light
Easy extensionEasy to install
Modern battery technology Multiple applications
POWER LINE fb lamp
fb lamps are the smaller version of the ceiling lamps. It allows a flexible lighting
service due to its versatility as desk light or as a fixed wall or ceiling light.
fb lamp 100 fb lamp 200
Lamp voltage 13 V 13 V
Lamp current 70 mA 150 mA
Nominal power 0.91 W 1.95 W
Light Source 4 LEDs 4 LEDs
Color Temperature 5000 K 5000 K
Illuminance 90 lm 180 lm
Cable length 6m, with integrated switch 6m, with integrated switch
Dimensions 20x6.3x4.5 cm 20x6.3x4.5 cm
Weight 0.1 kg 0.1 kg
Efficient LightLamps use high-efficient LED technology with a very long lifetime. Based on 5 opera-ting hours per day the LEDs can last up to 27 years without a significant reduction in brightness.
Easy to Install
systems allow easiest Plug & Play installation. No technical skills or special training are required. Solar modules, loads or extensions can be connected intuitively by only one cable.
POWERLINE
25
Engineered inGermany
MOBILE ONETorch & Lamp USB
Charging Solar Home System
The Mobile One is a LiFePO4 based flashlight with an integrated solar home system. The sys-tem can power lamps, phone charger, radios, has 3 LED dimming modes and an integrated USB port.
The integrated battery can be charged via solar panel, via other fosera systems or your laptop.
fosera Mobile ONE
Battery
Nominal Capacity 3.20 Ah
Nominal Voltage 3.25 V
Battery type LiFePo4
LED Dimming Modes Luminance/ Runtime
Mode 1 30 lm / 35 hours
Mode 2 100 lm / 10 hours
Mode 3 200 lm / 5 hours
Charge Controller Features
Deep discharge protection Yes
Over charce protection Yes
Short circuit protection Yes
Overcurrent protection Yes
Charging
Recommended charge current
0.58 A
Absolut max. charge current 2.20 A
User Interface
State of charge indicator Yes
26
Engineered inGermany
SCANDLEBright light
Energy efficient Solar lantern
BLUE LINE SCANDLE
Scandle is a bright, versatile and robust solar lantern, designed as lighting solution for off-grid households, backup lighting and as a torch. Two different brightness settings allow the usage as desk light for indoor works or as night light in dimmed mode. An additional load output expands Scandle‘s functiona-lity by allowing the connection for different applications.
Multiple Applications
has a unique, modular design principle. The Scandle load output allows the combination with the BLUE LINE lamps, radio and phone charger.If the energy demand grows, your system can grow with the increasing demand. Scandle can be easily combined with BLUE LINE PSHS and other BLUE LINE products.
27
Engineered inGermany
System voltage
SCANDLE 75 SCANDLE 200
System capacity 1.5 Ah 1.5 Ah
Module peak power 1.5 W 1.5 W
Module current 340 mA 340 mA
Module technology crystalline silicon crystalline silicon
Cable length module to lamp 6 m 6 m
Illuminance (bright mode) 75 lm 140 lm
Illuminance (dimmed mode) 10 lm 10 lm
Weight 0.67 kg 0.67 kg
Dimensions 22x21.5x5 cm 22x21.5x5 cm
Operation time
Daily operation hours (bright mode) * 6 h 3.5 h
Daily operation hours (dimmed mode) * 50 h 50 h
The Scandle can be charged as well as from the battery of PSHS or LSHS and used as a portable lamp.
28
Cooking with the sun
We`ll make a (burning) change !
To cook with solar power is fas-
cinating, and the energy to do so is
unlimited, clean, and free of charge
Reducing Labor and Saving Time
••••• Women and children don`t have to
struggle for hours to gather fire-
wood.
••••• Children can attend school rather
than gathering wood in sometimes
mine-invested areas.
Independence and Money Savings
••••• No need anymore for fossil fuels, such as petrol, kerosene, and
firewood. In some countries the cost for fuel accounts for more than
one third of a person`s monthly income. More often, the cost of fuel
is more expensive than the food.
Creating Employment and Training Centers
••••• The frames can be easily
manufactured and installed
in the workshops of the de-
veloping countries. Our part-
ner organisation, EG Solar
has already established in
some countries where solar
cookers are beeing manu-
factured.
Income Generation
••••• Income in this micro enterprise is generated by selling products
that were product with the aid of the solar cooker.
Examples of micro enterprise applications
- using in cook shops
- preparation of juices and jams
- food preservation (boiling food)
- roasting of coffee beans and peanuts
- producing soaps, creams, and essential oils
- dying and washing of textiles, ironing of clothes
- selling baking products
- sterilizing medical instruments and distiling water
- soil steaming (producing soil ready for sowing)
- boiling rice straw for the production of paper
A solar cooker workshop in Madagascar
Copyiright Vajra Foundation
Roasting coffee in Ethiopia
Ironing clothes with the aid ofsolar cooker
A solar restaurant in Argentina
How can you help?
Highly Compatible with Traditional Cooking
and Eating Habits
••••• Due to the high efficiency of the solar cookers, local dishes can be
prepared in the same amount of time as using a fireplace or gas
cooker.
••••• When using baskets or boxes to keep the food warm, cooking and
eating time do not have to occur at the same time. This way, a
warm dinner is always available, even after the sun went down.
A wicker basket covered with a woo-
len blanket keeps the food warm for
many hours.
••••• You purchase a solar cooker for yourself, and thereby help the
environment and the people in the developing countries. A portion
of the net proceeds will flow into the projects of our partner organiza-
tion EG Solar e.V.
••••• As an owner of a company, you become a distributor of the solar
cooker. We will be more than happy to provide you with a proposal
- there is not commitment on your part.
••••• You have contacts in relief organizations or with people in developing
countries and introduce the solar cooker to them.
••••• You become a member (annual membership 60,00 EUR), donor or
sponsor of the non-profit organization EG Solar e.V. and supporter
of the solar cooker project.
••••• Instead of Christmas presents promotional gifts for your clients, you
donate a certain amount to the projects of EG Solar e.V. and provide
your friends and clients with information about the project using
picture postcards.
••••• You provide solar cookers to schools in order to demonstrate to the
pupils the sun`s energy based on the solar cooker.
Long service life Gentle food preparationWell engineered and a high degree of comfort
Preparation of juices in Eritrea
29
Solar cooking is fun, it`s easy
on the environment, and most
of all...it saves money!
How does a Solar Cooker Work ?
The solar cooker works similar to a burning glass. Approximate
parallel sun rays are reflected in the cooker`s focal point. Due to the
high concentration of the sun`s
rays, the temperatures in the
focal point are extremely high.
Placing a pot or pan in the focal
point allows you to cook or fry a
meal. Preferably, the pot or frying
pan should be painted matt black,
since the black surface is most
advantageous to absorbs and
transfer the heat.
The solar cooker can be used all
year round, it is not affected by
outside temperatures and it can be used at any latitude.
The pivoting frame makes it easy to point the solar cooker in any
direction of the sun. Since the focal point is located inside a para-
bolic reflector, the cooker needs only be rotated once every 25 min-
utes.
There is no danger of eye damages due to the mirror`s glare!
Our Offer and Objective
We offer high-quality and high-performance solar cookers including
all necessary accessories.
Our solar cookers are manufactured locally, at facilities for disabled
persons and shops for difficult to place juveniles.
Our solar cookers have proven themselves 30,000 times all across
the globe. Together with our partner organisation EG Solar e.V., we
focus on the distribution of the solar cooker in order to make use of
renewable energies and protect the natural resources.
What can the Solar Cooker be used
for?
Anything is possible! The solar cooker is suitable for smoke-free
cooking, baking, grilling, frying, braising, and deep-frying.
Due to the high cooking performance of the solar cooker, meat, grill,
and pasta dishes, baked goods (e.g., bread, pies, pizzas), stews or
boiled meals are prepared nearly as quickly as cooking them on an
electrical stove or in an oven.
The solar cooker is ideal for the garden, patio, balcony, or camping!
Tel. +971 4 553 4107Mob. +971 50 459 6239 [email protected]
PuraNova TechDWCDubai, U.A.E.
What is the Global Effect of the
Solar Cooker?
The Problem with Firewood
Energy is the key to our future. There is a direct correlation between
poor energy supply and poverty. Without energy, economical and
social development is hardly conceivable.
Firewood is one of the most important energy sources in the world.
Firewood is mainly used for cooking purposes and represents
approximately 18% of the world`s prime energy consumptions, more
than nuclear and hydro power combined.
Globally, there are 2 billion people affected by the lack of firewood -
and the trend is rising.
The consequences are catastrophic and multifaceted; from air-
pollution in the kitchen, which may lead to lung diseases, to pollution
of the earth`s atmosphere.
Other environmental
damages include
deforestation and erosion
Street trading of
firewood.
Protecting the Environment and the Basis of
Existence
••••• Helps stopping the deforestation and associated soil erosion and
prevents the further depletion of the ground`s nutrients.
••••• Reduces CO2 emmision and therefore global warming. Using a so-
lar cooker will cut the CO2 emission by nearly 5 tonnes per year. As
comparison, the average German produces approximately 11 tonnes
of CO2 per year.
Health Issues
••••• Cooking with solar cookers does
not generate smoke, as does
traditional cooking over an open
fire. When preparing food in-
doors, the fumes can become
overwhelming. Women and
children inhale the equivalent of
200 to 400 unfiltered cigarettes
every day. Millions of infants die
due to respiratory diseases.
••••• Avoiding burn injuries causes by open flames.
••••• Solar cookers prevent kerosene poisoning (especially children) and
avoid fires caused by the kerosene.
••••• Being able to boil contaminated water
improves the hygiene. Globally, 1.3 billion
people don`t have access to clean drinking
water. When using a solar cooker, 50 liters
of drinking water can be produced every
day!
Well designed and state-of-the-art technology Easy to useSmoke-free cooking and grilling
30
SOLAR STOVE
100% solar powered. Cooking power: 1000-1200 Watts.
Grill, sear, sauté, steam, boil, bake and fry.
Tested to survive sandstorms while maintaining 92% energy efficiency. Reflectors selfheal scratches.
The most durable solar cooker on the market.
Technology from Harvard, MIT and Norwegian University of Science and Technology. Developed together with nomads in the Himalayas.
ENGINEERED TO PERFORM
34
Engineered inGermany
SOLAR ENTERTAINMENT &
APPLIANCESHigh efficient devices
to work with the systems
BLUE LINE radio
The solar radio is optimized for low energy consumption without com-promising the sound quality. The radio comes with an AUX IN and can be used as a loudspeaker for cell phones or Mp3 players.
USB phone charger
With the fosera USB-Charger an additional charging outlet
can be added to every fosera System.
BLUE LINE radio
Consumption 20-100 mA (depending on volume)
Tuner FM 64-108 MHz
Tuner MW 530-1600 KHz
Tuner SW 3.4-22 MHz
AUX-IN included
Features telescopic aerial, foldable handle
Weight 0.52 kg
Dimensions 19.5x14.2x9 cm
fairy light
The fairy light is a multicolour flashing LED chain of lights. Blinking LEDs in 8 different colours guarantee attention. It is designed for lowest energy consumption, with a current of less than 10mA.
As all BLUE LINE applications, it can be operated with our PSHS, Scandle or BOP 2.0
www.puranovatech.com35
Engineered inGermany
TVHighest energy efficiency
Winner of the Global LEAP Award
POWER LINE TV
proudly presents its award-win-ning 12V DC TV. fosera‘s TV consumes only 5.5 W and offers a number of inputs for modern entertainment.
Highest energy efficiency
Winner of the Emerging Technology - Small TV category of the Global LEAP Awards. With highest energy-efficiency it is designed to work with our POWER LINE LSHS ready for TV kits and all other 12 V solar systems.
fosera TV
System
Supply Voltage 13 V
Energy consumption 5.5 W
Inputs RF IN, PC-RGB, PC-Audio, AV in
Output Speakers: 2*3,5 W, Headphones
Accessory Remote control
TV display
Screen size 15.6“
Pixel number 1366*768
Aspect ratio 16:9
Brightness 180 cd/m2
Signals
TV input PAL, SECAM, HDMI
PC-RGB up to 1920*1080@60 Hz
CVBS PAL/NTSC/SECAM
Tuner range 48.25 - 863.25 MHz
Accessory
Receiver DVB-T2, DVB-S2
Weight & Dimensions
Weight 2.21 kg
Dimensions 50.5x33x10 cm
www.puranovatech.com
PuraNova TechP.O. Box 390667 Dubai World Central Dubai, [email protected] 36
Engineered inGermany
RECEIVERAvailable for satellite (DVB-S2)
and terrestrial (DVB-T2)
POWER LINE Receiver
offers two alternatives to receive program signals: satellite (DVB-S2) and terrestrial (DVB-T2),
depending on the receiving possibilities in the residential area.
Before purchase, it is required to know how program signals can be received in the residential area, whether by antenna or satellite.
DVB-S2 DVB-T2
Item Sub Item Parameter Parameter
Signal Input Satellite Antenna
Tuner Input frequency 950 - 2150 MHz 177.1 ~ 226.5 MHz
473.1 ~ 803.1 MHz
RF input level - 25 - 82 dBm
IF bandwidth - 6/7/8 MHz
Input impedance 75 Ω -
Modulation QPSK, 8 PSK, 16 APSK, 32 APSK (DVB-S/S2)
QPSK, 16 QAM, 64 QAM
Video Decoder format MPEG 4 AVC/H. 264 HP@L4 MPEG 4 AVC/H. 264 HP@L4
MPEG 4 AVC/H. 264 HP@L4 MPEG 4 AVC/H. 264 HP@L4
Audio output HDMI, AV HDMI, AV
Power Supply Voltage 13 V 13 V
Power 8.8 W 3.1 W
Weight 0.855 kg 0.7 kg
Dimensions 20.5x6x21.5 cm 18.5x17.5x5.5 cm
www.puranovatech.com
PuraNova TechP.O. Box 390667 Dubai World Central Dubai, [email protected]
37
Engineered inGermany
CEILING FAN 50 Highest energy efficiency
Easy to install
POWER LINE Ceiling Fan 50
With the ceiling fan a pleasant indoor climate can be achieved and the living quality significantly improved. The ceiling fan has a very low energy consumption and can be implemented at moderate costs.The ceiling fan is to be powered by the LSHS 12V system.
Easy to install
systems allow easiest Plug & Play installation. No technical skills or special training are required. After
the ceiling fan is mounted, all electrical components of the system can be connected intuitively.
Ceiling fan 50
Supply Voltage 13 V
Power 4 W
Power source fosera LSHS
Current 310 mA
Diameter 42 cm
Speed 290 rpm
Operating temperature 0 C - 35 C
DC plug 3.5 / 1.35, male, inside positive – outside negative
Cable 22 AWG, 6 m, switch incl.
Number of blades 3 pcs.
Weight 410 g
Dimensions 21x9.5x9 cm
www.puranovatech.com
PuraNova TechP.O. Box 390667 Dubai World Central Dubai, [email protected]
38
DC Fans
DC Ceiling Fan Cool Breeze RC 12 12 V ceiling fans are high efficiency DC ceiling fans. Phaesun ceiling fans for direct current outclass AC fans by a factor of 4 to 6 in consumption and competing DC fans by more than a factor of 2 when comparing the same air performance in the medium speed range.
DC Ceiling Fan Cool Breeze 24 High efficiency DC ceiling fans. Thanks to the innovative concept the Phaesun 24 V ceiling fans have a very high air performance. The fan is designed to be used in 24 VDC systems. Main advantage is the low power consumption.
Article Dimensions [l x w x h] Weight Article No.
Cool Breeze RC 12 Ø 1320 mm 7 kg 360084
3 blades | 12 VDC | 6 steps | with remote control | max. speed 240 rpm | air delivery 12165 m³/h
Article Dimensions [l x w x h] Weight Article No.
Cool Breeze 24 Ø 1320 x 230 mm 4,65 kg 360036
3 blades | 24 VDC | max. speed 220 rpm | air delivery 11200m³/h
Cool Breeze RC 24 Ø 1320 x 230 mm 4,65 kg 360037
3 blades | 24 VDC | max. speed 220 rpm | air delivery 11200 m³/h | with remote control
Ceiling Fan Rod ST60 [L] = 60 mm 190 g 390332
Ceiling Fan Rod ST100 [L] = 100 mm 200 g 390333
39
Article Dimensions [l x w x h] Weight Article No.
Fast Breeze 270 x 345 x 500 mm 2,1 kg 360123
3 speed level 2,7 W – 5,3 W – 10,4 W | 12 VDC | rotating function | electronic commutated motor | white
speed level switch
1 2 3
power 2,7 W 5,3 W 10,4 W
air-flow 370 m3/h 580 m3/h 720 m3/h
Table Fan Fast Breeze The highly efficient electronically commutated motor allows for the lowest energy consump-tion with the highest fan efficiency. The table fan Fast Breeze with an automatic swivelling drive including three speed levels is both suited for offices and living rooms, but also for production halls or when you travel.
40
Monitoring and Exterior Lighting Kits
Solar LED Lamp Duo LPL LED spots with integrated accumulator pack. The accumulators are charged by means of the solar module which is included in the delivery scope. The two LED spots can be individually adjusted to optimise the illumination according to the local conditions. Integrated, revolvable motion sensor with long distance range. Ideal for outside use e.g. garden lights etc.
Camera Monitoring Kit Solar Spy This kit transmits images from anywhere given a mobile communications network is available. Camera files images in fixed time intervals on a server which is accessible via internet at any time. Supervision can be done with every web-enabled device, even a smart phone.
True day & night functionality 2-way audio support 3G-(UMTS/HSPA/CDMA) mobile network router
Integrated firewall and VPN tunnel
Article Dimensions [l x w x h] Weight Article No.
Solar LED Lamp Duo LPL white 112 x 70 x 144 mm 0,5 kg 360015
2 LEDs | cool daylight | 750 mAh battery | NiMH
Solar LED Lamp Duo LPL black 112 x 70 x 144 mm 0,5 kg 360075
2 LEDs | cool daylight | 750 mAh battery | NiMH
Article Weight Article No.
Solar Spy IG 1 63,3 kg 600184
50 W module | 80 Ah battery | recording & transmitting 13,6 W | stand-by 6,5 W | 1280 x 960 Pixel | 12/24 V
Solar Spy IG 2 – 3 72,4 kg 600185
80 W module | 100 Ah battery | recording & transmitting 13,6 W | stand-by 6,5 W | 1280 x 960 Pixel | 12/24 V
Solar Spy IG 4 88,6 kg 600186
100 W module| 120 Ah battery | recording & transmitting 13,6 W | stand-by 6,5 W | 1280 x 960 Pixel | 12/24 V
41
Info Signs Quality stainless steel design and slightly con-vex lighting surface made of UV resistant plas-tic material. The plastic lighting surface can be taken out for the labelling with adhesive film or printing. While the installed accumulators are charged by means of the solar modules during the day, the information sign is acti-vated automatically at night. Delivery ready for operation, accumulators included.
Sign Illumination Appropriate for the illumination of existing promotional signs, company nameplates, or information signs. This complete package is available in three different lengths.
Article Dimensions [l x w x h] Weight Article No.
Info Signs
Solar Info Sign L 500 x 330 x 70 mm 2,2 kg 380022
2 LEDs | 1,4 W modules | 1,3 Ah batteries | IP34
Solar Info Sign XL 812 x 505 x 105 mm 5,0 kg 380023
2 LEDs | 2,5 W modules | 2,6 Ah batteries | IP34
Solar Info Sign XXL 812 x 700 x 105 mm 7,7 kg 380024
4 LEDs | 5 W modules | 5,2 Ah batteries | IP34
Article Dimensions [l x w x h] Weight Article No.
Sign Illumination
Sign Illumination Profi 1 310 x 110 x 68 mm 800 g 380028
2 LEDs | 1,4 W solar module | 1,3 Ah | IP34
Sign Illumination Profi 2 500 x 110 x 68 mm 1,3 kg 380029
4 LEDs | 2,5 W solar module | 2,6 Ah | IP34
Sign Illumination Profi 3 830 x 110 x 68 mm 2,2 kg 380030
8 LEDs | 5 W solar module | 5,2 Ah | IP34
Made inEurope
Made inEurope
42
WATER, SANITATION & HYGIENE (WASH)PROGRAMMES
AGRICULTURE, LIVELIHOOD ANDECONOMIC DEVELOPMENT PROGRAMMES
pump system PS150 Boost PS600 CS-F PS1800 CS-F PS4000 CS-F
max. total dynamic head (TDH) [m] 150 40 50 70
max. flow rate [m3/h] 1.3 8.3 8.5 59
solar operation:
max. power voltage (Vmp)* [V DC] > 17 > 68 > 102 > 238
open circuit voltage (Voc) [V DC] max. 50 max. 150 max. 200 max. 375
nominal voltage [V DC] 12 – 24 24 – 48 72 – 96 168 – 192
battery operation:
nominal voltage [V DC] 12 and 24 48 96 n.a.
pump type positive displacement centrifugal pump centrifugal pump centrifugal pump
PS Surface Solar Pump Systems
LORENTZ PS Surface Pumps are high quality
products designed for water transfer, pond
management and irrigation applications where
a surface pump is required.
The LORENTZ PS range of DC powered surface
pumps are connected to a solar generator via
a controller. The controller provides inputs for
monitoring storage tank levels, controlling the
pump speed and uses maximum power point
tracking technology to optimize the water
volume that is pumped.
Features
� Engineered in Germany
� High quality non corrodible materials used
throughout
� Solar direct connect with AC connection options
� MPPT technology to maximise power use from PV
modules
� ECDRIVE DC brushless motors, designed for solar
with over 90 % efficiency
� Optional data logger
Benefits
� Long life expectancy and proven in service record
� Designed for use in remote and harsh conditions
� Smart modular design for simple and cost effective
servicing and repair
� Fast and simple installation
� Cost effective spare parts philosophy
� Very strong ROI against diesel powered pumping
reducing production costs and reducing carbon
footprint
*) PV modules at standard test condition: AM = 1.5, E = 1,000 W/m², cell temperature: 25 °C
Puranova Techavenue DWC-LLC
P.O. Box 390667- Dubai World Central - Dubai - United Arab Emirates - +971 4 553 4107All specifi cations and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may diff er from actual products depending on local market re-quirements and regulations. A pump system consists of a controller, motor and pump end. Multiple pumps/pump ends are shown to represent the wide range of pumps (over 104) that PuraNova Tech has.
To find out more visit www.puranovatech.com
44
Centrifugal Pump Systems
LORENTZ PSk2 systems are our next gene-
ration of solar water pumps designed to
deliver the highest volume of water across
a wide range of lifts. PSk2 pumps perform
equally well in irrigation projects and for
a wide area of drinking water applica-
tions where they reliably meet the most
demanding requirements, economically
and without the use of fossil fuels or a grid
connection.
PSk2 provides all of the features and func-
tions that larger scale water projects require
including a wide range of sensor inputs and
inbuilt monitoring and management. PSk2 is
also compatible with LORENTZ CONNECTED
services for cost effective remote monito-
ring and management. Although technically
advanced, PSk2 is simple to specify, install
and maintain and provides exceptional
performance driven by LORENTZ long expe-
rience of off grid solar pumping.
Benefits
� Very strong ROI against diesel powered pumping,
reducing water production costs and reducing
carbon footprint
� Advanced power management techniques to
deliver the most water based on the power
available
� Comprehensive inputs and outputs to provide a
cost effective single unit solution
� Wide range of products to closely match each
application and optimize efficiency
� Fast specification, installation and configuration
allow for fast implementation and minimal
downtime
� Smart modular product design for simple and
cost effective product repair
� Powerful inbuilt monitoring and control features
provide detailed operational information and
simple access to advanced features
Features
� Engineered in Germany using high quality non
corrodible materials
� IP54 / NEMA 3A corrosion resistant controller
housing
� 0 – 60Hz motor speed control
� Wide range of inputs to influence pump
behaviour
� Integrated monitoring and management
including onboard recording of 5 years
performance data, smart device access via
PumpScanner Android™ App and integration to
LORENTZ pumpMANAGER remote management
service
� Inbuilt irradiation measurement and pump
control based on power available
� Integration with the LORENTZ SmartPSU for
grid / generator connection and power blending
PSk2 Surface Solar Pump Systems
pump system PS 7k2 PS 9k2 PS 15k2 PS 21k2 PS 25k2 PS 40k2
max. total dynamic head (TDH) [m] 90 80 80 80 40 90
max. flow rate [m3/h] 114 120 279 306 457 499
solar operation:
open circuit voltage (Voc) [V DC] max. 850 max. 850 max. 850 max. 850 max. 850 max. 850
Puranova Techavenue DWC-LLC
P.O. Box 390667- Dubai World Central - Dubai - United Arab Emirates - +971 4 553 4107All specifi cations and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may diff er from actual products depending on local market re-quirements and regulations. A pump system consists of a controller, motor and pump end. Multiple pumps/pump ends are shown to represent the wide range of pumps (over 104) that PuraNova Tech has.
To find out more visit www.puranovatech.com
45
Puranova Techavenue DWC-LLC
P.O. Box 390667- Dubai World Central - Dubai - United Arab Emirates - +971 4 553 4107All specifi cations and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may diff er from actual products depending on local market re-quirements and regulations. A pump system consists of a controller, motor and pump end. Multiple pumps/pump ends are shown to represent the wide range of pumps (over 104) that PuraNova Tech has.
To find out more visit www.puranovatech.com
Submersible Pump Systems for 4” and 6” Wells
PS Centrifugal Solar Pump Systems
pump system PS150 C PS600 C PS1800 C PS4000 C
max. total dynamic head (TDH) [m] 20 30 100 160
max. flow rate [m3/h] 4.0 12 53 79
solar operation:
max. power voltage (Vmp)* [V DC] > 17 > 68 > 102 > 238
open circuit voltage (Voc) [V DC] max. 50 max. 150 max. 200 max. 375
nominal voltage [V DC] 12 – 24 48 – 72 72 – 96 168 – 192
battery operation:
nominal voltage [V DC] 12 & 24 48 96 n.a.
*) PV modules at standard test condition: AM = 1.5, E = 1,000 W/m², cell temperature: 25 °C
LORENTZ PS centrifugal pumps are high
quality products designed for higher flow
drinking water supply, livestock watering,
pond management and irrigation applications.
PS centrifugal pumps provide large volumes
of water economically, without pollution,
anywhere.
Benefits
� Long life expectancy and proven in service record
� Designed for use in remote and harsh conditions
� Smart modular design for simple and cost effective
servicing and repair
� Water filled motors for reliability and to avoid oil
contamination
� Fast and simple installation
� Cost effective spare parts philosophy
� Very strong ROI against diesel powered pumping
reducing production costs and reducing carbon
footprint
� Large range of pumps to closely match each
application and optimise efficiency
Features
� Engineered in Germany
� High quality non corrodible materials used
throughout
� Cast stainless steel components
� Solar direct connect with AC connection options
� MPPT technology to maximise power use from PV
modules
� ECDRIVE DC brushless motors, designed for solar,
with over 90% efficiency
� Optional data logger
The LORENTZ PS range of DC powered centri-
fugal pumps have been designed specifically
to pump larger volumes of water efficiently
using solar power. These highly efficient
pumps can achieve flow rates of 79 m3/hour.
Each system consists of a pump, pump motor
and a controller. This modular concept keeps
all electronics above ground providing simple
servicing, ease of access and a low cost of
ownership.
46
Puranova Techavenue DWC-LLCP.O. Box 390667 - Dubai World Central - Dubai - United Arab Emirates - +9971 4 553 4107
To find out more visit www.puranovatech.com
Submersible Pump Systems for 4” and 6” Wells
LORENTZ PS helical rotor pumps are high
quality products designed for drinking
water supply, livestock watering and smaller
irrigation applications. PS helical rotor pump
systems deliver water economically, cleanly
and reliably, anywhere.
Benefits
� Long life expectancy and proven in service record
� Designed for use in remote and harsh conditions
� Smart modular design for simple and cost effective
servicing and repair
� Water filled motors for reliability and to avoid oil
contamination
� Fast and simple installation
� Cost effective spare parts philosophy
� Very strong ROI against diesel powered pumping
� Large range of pumps to closely match each
application and optimise efficiency
pump system PS200 HR PS600 HR PS1800 HR PS4000 HR
max. total dynamic head (TDH) [m] 50 180 250 450
max. flow rate [m3/h] 2.6 2.6 3.9 2.5
solar operation:
max. power voltage (Vmp)* [V DC] > 34 > 68 > 102 > 238
open circuit voltage (Voc) [V DC] max. 100 max. 150 max. 200 max. 375
nominal voltage [V DC] 24 – 48 48 – 72 72 – 96 168 – 192
battery operation:
nominal voltage [V DC] 24 and 48 48 96 n.a.
*) PV modules at standard test condition: AM = 1.5, E = 1,000 W/m², cell temperature: 25 °C
Features
� Engineered in Germany
� Water temperature specific variants to provide the
most efficient outputs
� High quality non corrodible materials used
throughout
� Cast stainless steel components
� Solar direct connect with AC connection options
� MPPT technology to maximise power use from PV
modules
� ECDRIVE DC brushless motors, designed for solar,
with over 90 % efficiency
� Optional data logger
The LORENTZ PS range of DC powered helical
rotor pumps have been designed specifically
to pump water efficiently using solar power.
The helical rotor pump is simple, efficient and
reliable, pumping water with very low levels
of solar power from up to 450 m below the
ground.
Each system consists of a pump, pump motor
and a controller. This modular concept keeps
all electronics above ground providing simple
servicing, ease of access and a low cost of
ownership.
PS Helical Rotor Solar Pump Systems
All specifi cations and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may diff er from actual products depending on local market re-quirements and regulations. A pump system consists of a controller, motor and pump end. Multiple pumps/pump ends are shown to represent the wide range of pumps (over 104) that PuraNova Tech has.
47
Submersible Pump Systems for 6”, 8” and 10” Wells
LORENTZ PSk2 systems are our next generation of solar water pumps
designed to deliver the highest volume of water across a wide range
of lifts. PSk2 pumps perform equally well in irrigation projects and
for a wide area of drinking water applications where they reliably
meet the most demanding requirements, economically and without
the use of fossil fuels or a grid connection.
Benefits
� Very strong ROI against diesel powered pumping,
reducing water production costs and reducing
carbon footprint
� Advanced power management techniques to
deliver the most water based on the power
available
� Comprehensive inputs and outputs to provide a
cost effective single unit solution
� Wide range of products to closely match each
application and optimize efficiency
� Fast specification, installation and configuration
allow for fast implementation and minimal
downtime
� Smart modular product design for simple and
cost effective product repair
� Powerful inbuilt monitoring and control features
provide detailed operational information and
simple access to advanced features
Features
� Engineered in Germany using high quality non
corrodible materials
� IP54 / NEMA 3A corrosion resistant housing
� 0 – 60Hz motor speed control
� Wide range of inputs to influence pump
behaviour
� Integrated monitoring and management
including onboard recording of 5 years
performance data, smart device access via
PumpScanner Android™ App and integration to
LORENTZ pumpMANAGER remote management
service
� Inbuilt irradiation measurement and pump
control based on power available
� Integration with the LORENTZ SmartPSU for
grid / generator connection and power blending
PSk2 provides all of the features and functions that larger scale
water projects require including a wide range of sensor inputs and
inbuilt monitoring and management. PSk2 is also compatible with
LORENTZ CONNECTED services for cost effective remote monitoring
and management. Although technically advanced, PSk2 is simple to
specify, install and maintain and provides exceptional performance
driven by LORENTZ long experience of off grid solar pumping.
PSk2 Centrifugal Solar Pump Systems
pump system PS 7k2 PS 9k2 PS 15k2 PS 21k2 PS 25k2 PS 40k2
max. total dynamic head (TDH) [m] 80 120 140 120 120 200
max. flow rate [m3/h] 128 136 235 218 112 241
solar operation:
open circuit voltage (Voc) [V DC] max. 850 max. 850 max. 850 max. 850 max. 850 max. 850
*) PV modules at standard test condition: AM = 1.5, E = 1,000 W/m², cell temperature: 25 °C
Puranova Techavenue DWC-LLC
P.O. Box 390667- Dubai World Central - Dubai - United Arab Emirates - +971 4 553 4107All specifi cations and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may diff er from actual products depending on local market re-quirements and regulations. A pump system consists of a controller, motor and pump end. Multiple pumps/pump ends are shown to represent the wide range of pumps (over 104) that PuraNova Tech has.
To find out more visit www.puranovatech.com
48
High-efficiency PV Modules
Benefits
� Known good quality modules from a
recognised supplier
� Tested with LORENTZ solar pumping systems
which reduces project risk
� Module specifications included as standard in
LORENTZ COMPASS solar planning software
and kept up to date
� LORENTZ guarantee
Features
� High conversion efficiency
� Pre-wired junction box with connectors for
“plug and play”
� Reliable bypass diodes to prevent
overheating and minimise power loss
from shading
� Manufactured in an ISO 9001:2000 certified
factory
LORENTZ LC Series PV Modules are high
quality, high efficiency modules which are
proven for use in off grid applications.
LC Series Modules are used in a wide
range of applications including water
pumping, water purification systems
and anywhere that a reliable, robust PV
module is required.
Pmax Cells Tolerance Imp Vmp Isc Voc Temperature co-efficient for Max. System Voltage Size Weight
Pmax Voc Isc
LC Series [Wp] [%] [A] [V] [A] [V] [%/°C] [%/°C] [%/°C] [V] [mm] [kg]
LC100-M36 100 36 + 5/0 5.35 18.7 5.72 23.0 – 0.40 – 0.33 0.05 1,000 1,197 × 552 × 35 8.1
LC150-P36 150 36 + 5/0 7.98 18.8 8.50 22.7 – 0.42 – 0.34 0.06 1,000 1,492 × 673 × 40 12.0
LC205-M72 205 72 + 5/0 5.49 37.4 5.86 45.8 – 0.40 – 0.33 0.05 1,000 1,580 × 808 × 40 14.8
LC250-P60 250 60 + 5/0 8.23 30.4 8.81 37.6 – 0.42 – 0.34 0.06 1,000 1,650 × 992 × 40 18.5
LC300-P72 300 72 + 5/0 8.21 36.5 8.80 45.1 – 0.42 – 0.34 0.06 1,000 1,956 × 992 × 40 21.8
The LC Series modules are built with
sturdy aluminium frames, advanced EVA
encapsulation and triple layer backs-
heets to meet the most stringent safety
requirements.
PV Modules LC Series
*) PV modules at standard test condition: AM = 1.5, E = 1,000 W/m², cell temperature: 25 °C
Puranova Techavenue DWC-LLC
P.O. Box 390667- Dubai World Central - Dubai - United Arab Emirates - +971 4 553 4107All specifi cations and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may diff er from actual products depending on local market re-quirements and regulations. A pump system consists of a controller, motor and pump end. Multiple pumps/pump ends are shown to represent the wide range of pumps (over 104) that PuraNova Tech has.
To find out more visit www.puranovatech.com
49
TWIN ACPV KITS INCLUDING EASY RACKING SYSTEM
www.puranovatech.com
FLEXIBLE ENERGY SOLUTION TWIN ACPV Kits
Designed for ultimate simplicity and flexibility, TWIN ACPV Kits includes 2 pcs AC module up to 500W AC output in total, easy racking system, and all necessary cabling. The AC module consists of solar module and micro-inverter, and generates AC power output directly when exposed to sunlight. The easy racking system is made of light weight, steady Aluminum profiles with adjustable title angle, suitable for ground, flat or tilted rooftop applications. With package size merely 1665x1035x95mm, TWIN ACPV Kits can be deployed either as a micro grid-connected power generator or as part of larger PV system when more kits are connected together
In package
A: Tripod
F: End Clamp
D: Rail SpliceC: Base Rail
AC Module
Field deployment
E: Middle Clamp
50
TWIN ACPV Kits
COMPONENT SPECIFICATIONS
TWIN AC Module
Solar Module Type 6”, Mono/Poly, 60/72 cells
Nominal DC Input (W) @ STC 480~580
Maximum AC Output (W) EU [ 500 ], NA [ 450 ]
Nominal Voltage (Vac) EU [ 230 / 207~253 (Ph+N), 400 / 310~450 (3Ph+N) ]
NA [ 240 / 211~264 (Ph+N), 208 / 183~229 (3Ph+N) ]
Nominal Frequency (Hz) EU [ 50.0 / 47~53 ], NA [ 60.0 / 59.3~60.5 ]
Module Certifications UL, ETL, TUV, CE
Microinverter Certifications UL1741, CSA C22.2, IEEE 1547, FCC Part 15, ANSI C63.4 2003
Warranty 10-year warranty on materials and workmanship and 25-year linear power warranty for module
25-year warranty for micronverter
Max Units per 25A Branch EU [ 9 (Ph+N), 16 (3Ph+N) ], NA [ 10 (Ph+N), 9 (3Ph+N) ]
Alumimum 6005-T5
40mm x 60mm
235N/m2
15 year
2
6
4
2
2
Easy Racking System
Profiles Material
Profiles Crosection
Permitted Tension
Warranty
Components
A: Tripod (1440mm, for ground or flat roof only)
B: Roofhook (for tilted roof only):
C: Base Rail (1050mm):
D: Rail Splice:
E: Module Middle Clamp:
F: Module End Clamp: 4
1
PV Cable (opt ional) G:
AC Interconection Cable (2m) H:
Protective End Cap 1
A B
C D
E FG H
51
EOPLLY 125 Monocrystalline series solar modules are made of 72 pcs
125×125mm monocrystalline solar cells in series with high eiciency, high
transmission rate and low iron tempered glass, anti-aging EVA, flame
resistant back sheet and anodized aluminum alloy. Eoplly modules are built
to high quality standards (86 control points) ofering a long service life, are
easy to install and demonstrate high wind and hail impact resistance.
FEATURES AND BENEFITS
High eiciency
Outstanding low-light
performance
thanks to anti-relective glass
10 years product guarantee
Applicable for on-grid and
24V of-grid system
Power warranties:
25 year linear
Member of PV CYCLE
Power tolerance 0/+3%
Three bypass diodes
Pass 5400 Pa Pressure Test
EP 125MB / 72 (185W-195W)Monocrystalline Silicon Black Solar Module
ALL BLACK MONO-SILICON MODULE FOR RESIDENTIAL APPLICATIONS
Eoplly’s Linear Power Warranty guaranties 96.5% at Year 1 and 80%
at Year 25 with no greater than 0.7% per year loss. EOPLLY guaranties
more electricity production over 25 years than standard warranties.
Our 10 years materials and workmanship warranty is a guaranty of
quality and long lifetime.
5
80%
90%
100%
1510 20 25
Gu
aran
tee
d P
ow
er
Years
52
EP 125MB / 72 (185W-195W)Monocrystalline Silicon Black Solar Module
ELECTRICAL DATA @STC EP125MB/72-185W EP125MB/72-190W EP125MB/72-195W
Rated Maximum Power (Watts) 185 190 195
Power Output Tolerance-Pmax (%) 0/+3 0/+3 0/+3
Maximum Power Voltage (V dc) 35.59 36.11 36.52
Maximum Power Current (A dc) 5.262 5.325 5.383
Open Circuit Voltage (V dc) 44.29 44.83 45.26
Short Circuit Current (A dc) 5.696 5.749 5.814
Module Eiciency 14.49% 14.88% 15.27%
Values at Standard Test Conditions STC (Air Mass AM1.5, Irradiance 1000W/m², Cell Temperature 25°C)
MECHANICAL DATA
Solar Cells Monocrystalline silicon solar cell 125x125mm
Cell Orientation 72 (6x12)
Module Dimension 1580 × 808 × 35mm
Weight 15kg
Glass 3.2mm tempered glass
Frame Anodized aluminum alloy (black)
Junction Box Above IP67
ELECTRICAL DATA @NOCT EP125MB/72-185W EP125MB/72-190W EP125MB/72-195W
Maximum Power (W) 135.3 138.9 142.0
Maximum Power Voltage (V dc) 31.97 32.43 32.80
Maximum Power Current (A dc) 4.233 4.283 4.330
Open Circuit Voltage (V dc) 40.09 40.57 40.97
Short Circuit Current (A dc) 4.617 4.660 4.712
Values at noct: Irradiance at 800W/m², Ambient Temperature 20°C, Wind Speed 1m/s.
TEMPERATURE RATINGS
Nominal Operating Cell Temperature (NOCT) 47±3°C
Short-circuit current temperature coeicient (%/°C) 0.06
Open-circuit Voltage temperature coeicient (%/°C) -0.39
Peak power temperature coeicient (%/°C) -0.44
MAXIMUM RATINGS
Operational Temperature -40~+85°C
Maximum System Voltage1000V DC(IEC)600V DC(UL)
Max Series Fuse Rating 10A
ALL DIMENSIONS IN mm
Po
we
r (W
)
Ave. eiciency reduction of <4.5% at 200W/m2 according to IEC 60904-1:2006
Current - Voltage curve at various light levels (125MB/72)
Cu
rre
nt
(A)
Voltage (V)
580
A A
808
1580
1180
35
11
35
35
758
Section A-A
Mounting solt
Grounding hole
Drainage holeJunction box3.5X8.5(2-R1.75)
14X9(2-R4.5)
2-Ø4
53
EOPLLY 156 Polycrystalline series solar modules are made of 60 pcs
156×156mm Polycrystalline solar cells in series with high efficiency, high
transmission rate and low iron tempered glass, anti-aging EVA, flame
resistant back sheet and anodized aluminum alloy. Eoplly modules are built
easy to install and demonstrate high wind and hail impact resistance.
FEATURES AND BENEFITS
Outstanding low-light
performance
Power warranties:
25 year linear
Member of PV CYCLE
10 years product guarantee
Pass 5400 Pa Pressure Test
Power tolerance 0/+3%
Three bypass diodes
Polycrystalline Silicon Solar Module
Eoplly’s Linear Power Warranty guaranties 97.5% at Year 1 and 80.7%
at Year 25 with no greater than 0.7% per year loss. EOPLLY guaranties
more electricity production over 25 years than standard warranties.
Our 10 years materials and workmanship warranty is a guaranty of
quality and long lifetime.
5
80%
90%
100%
1510 20 25
Gu
aran
tee
d P
ow
er
Years
EP 156P / 60 (235W-260W)
EOPLLY + 9%
Mehrertrag über 25 Jahre
54
Polycrystalline Silicon Solar Module
MECHANICAL DATA
Solar Cells Polycrystalline silicon solar cell 156x156mm
Cell Orientation 60 (6x10)
Module Dimension 1640 × 992 × 40mm
Weight 18.8kg
Glass 3.2mm tempered glass
Frame Anodized aluminum alloy
Junction Box IP67
TEMPERATURE RATINGS
Nominal Operating Cell Temperature (NOCT) 46±2°C
(%/°C) 0.06
Open-circuit Volt (%/°C) -0.35
(%/°C) -0.48
MAXIMUM RATINGS
Operational Temperature -40~+85°C
Maximum System Voltage1000V DC(IEC)600V DC(UL)
Max Series Fuse Rating 15A
EP 156P / 60 (235W-260W)
ELECTRICAL DATA @STCEP156P/
60-235WEP156P/
60-240WEP156P/
60-245WEP156P/60-250W
EP156P/60-255W
EP156P/60-260W
Rated Maximum Power (Watts) 235 240 245 250 255 260
Power Output Tolerance-Pmax (%) 0/+3 0/+3 0/+3 0/+3 0/+3 0/+3
Maximum Power Voltage (V dc) 30.29 30.54 31.02 31.32 31.56 31.80
Maximum Power Current (A dc) 7.792 7.900 7.960 8 .000 8.100 8 . 2 01
Open Circuit Voltage (V dc) 36.72 37.02 37.38 37.56 37.68 3 7. 8 0
Short Circuit Current (A dc) 8.644 8.681 8.747 8.791 8.901 9.012
14.44% 14.75% 15.06% 15.37% 15.67% 15.98%
Values at Standard Test Conditions STC (Air Mass AM1.5, Irradiance 1000W/m², Cell Temperature 25°C)
ELECTRICAL DATA @NOCTEP156P/
60-235WEP156P/
60-240WEP156P/
60-245WEP156P/60-250W
EP156P/60-255W
EP156P/60-260W
Maximum Power (W) 170.7 174.7 1 79.0 182.1 186.2 190.5
Maximum Power Voltage (V dc) 27.62 27.89 2 8.37 28.73 28.99 29.29
Maximum Power Current (A dc) 6.183 6.262 6.315 6.348 6.424 6. 511
Open Circuit Voltage (V dc) 33.58 33.87 34.24 34.47 34.63 34.83
Short Circuit Current (A dc) 7.007 7.031 7.081 7.113 7.210 7. 3 0 7
Values at noct: Irradiance at 800W/m², Ambient Temperature 20°C, Wind Speed 1m/s.
ALL DIMENSIONS IN mm
Po
we
r (W
)
2 according to IEC 60904-1:2006
Current - Voltage curve at various light levels (156P/60)
Cu
rre
nt
(A)
Voltage (V)
942
992
11
35
40
40
800
1300
1640
AA
Section A-A
Mounting solt
Grounding hole
Drainage holeJunction box3.5X8.5(2-R1.75)
14X9(2-R4.5)
2-Ø4
55
EOPLLY 156 Polycrystalline series solar modules are made of 72 pcs
156×156mm Polycrystalline solar cells in series with high efficiency, high
transmission rate and low iron tempered glass, anti-aging EVA, flame
resistant back sheet and anodized aluminum alloy. Eoplly modules are built
easy to install and demonstrate high wind and hail impact resistance.
FEATURES AND BENEFITS
Outstanding low-light
performance10 years product guarantee
Applicable for on-grid andPower warranties:
25 year linear
Member of PV CYCLE
Power tolerance 0/+3%
Three bypass diodes
Pass 5400 Pa Pressure Test
EP 156P / 72 (285W-310W)Polycrystalline Silicon Solar Module
Eoplly’s Linear Power Warranty guaranties 97.5% at Year 1 and 80.7%
at Year 25 with no greater than 0.7% per year loss. EOPLLY guaranties
more electricity production over 25 years than standard warranties.
Our 10 years materials and workmanship warranty is a guaranty of
quality and long lifetime.
5
80%
90%
100%
1510 20 25
Gu
aran
tee
d P
ow
er
Years
UR L
EOPLLY + 9%
Mehrertrag über 25 Jahre
56
EP 156P / 72 (285W-310W)Polycrystalline Silicon Solar Module
ELECTRICAL DATA @STCEP156P/72-310W
EP156P/72-285W
EP156P/72-290W
EP156P/72-295W
EP156P/72-300W
EP156P/72-305W
Rated Maximum Power (Watts) 285 290 295 300 305
Power Output Tolerance-Pmax (%) 0/+3 0/+3 0/+3 0/+3 0/+3 0/+3
Maximum Power Voltage (V dc) 37. 99 36.65 37.15 37.22 37.58 37.87
Maximum Power Current (A dc) 7.831 7.890 7.960 8.000 8.100
Open Circuit Voltage (V dc) 45.36 44.43 44.64 44.86 45.07 45.22
Short Circuit Current (A dc) 8.634 8.699 8.776 8.820 8.931
14.64% 14.89% 15.15% 15.41% 15.66%
Values at Standard Test Conditions STC (Air Mass AM1.5, Irradiance 1000W/m², Cell Temperature 25°C)
MECHANICAL DATA
Solar Cells Polycrystalline silicon solar cell 156x156mm
Cell Orientation 72 (6x12)
Module Dimension 1953x997x50mm
Weight 23.2kg
Glass 3.2mm tempered glass
Frame Anodized aluminum alloy
Junction Box IP67
ELECTRICAL DATA @NOCTEP156P/72-310W
EP156P/72-285W
EP156P/72-290W
EP156P/72-295W
EP156P/72-300W
EP156P/72-305W
Maximum Power (W) 230.1 211.2 215.8 218.6 222.0 226.6
Maximum Power Voltage (V dc) 35.63 34.03 34.55 34.70 35.13 35.47
Maximum Power Current (A dc) 6.554 6.259 6.313 6.368 6.395 6.481
Open Circuit Voltage (V dc) 42.30 41.17 41.43 41.69 41.92 42.14
Short Circuit Current (A dc) 7.287 6.969 7.026 7.093 7.136 7.218
Values at noct: Irradiance at 800W/m², Ambient Temperature 20°C, Wind Speed 1m/s.
TEMPERATURE RATINGS
Nominal Operating Cell Temperature (NOCT) 43±2°C
(%/°C) 0.06
Open-circuit Volt (%/°C) -0.34
(%/°C) -0.46
MAXIMUM RATINGS
Operational Temperature -40~+85°C
Maximum System Voltage1000V DC(IEC)600V DC(UL)
Max Series Fuse Rating 15A
ALL DIMENSIONS IN mm
Po
we
r (W
)
2 according to IEC 60904-1:2006
Current - Voltage curve at various light levels (156P/72)
Cu
rre
nt
(A)
Voltage (V)
997
1953
1300
800AA
947
50
50
11
35
Section A-A
Mounting solt
Grounding hole
Drainage holeJunction box3.5X8.5(2-R1.75)
14X9(2-R4.5)
2-Ø4
310
8.185
9.025
15.92%
57
High Quality• IEC 61215 (Ed.2) and IEC 61730 Certified by VDE• Output power tolerance +3/-0 %• ISO 9001:2008, ISO 14001:2004 and ISO 50001:2011 Certified• OHSAS 18001:2007 Certified• Advanced Mechanical Test (5,400 Pa) Passed (IEC 61215)• IEC 62716 (Ammonia Corrosion Test) Certified• IEC 61701 (Salt Mist Corrosion Test) Certified
Accredited Test Lab• VDE (Test Data Acceptance Program)• UL (Witness Test Data Program)
Limited Warranty• 10 years for product defect• 10 years for 90 % of warranted min. power• 25 years for 80 % of warranted min. power
※ Important Notice on Warranty The warranties apply only to the PV modules with Hyundai Heavy Industries Co., Ltd.'s
logo (shown below) and product serial number on it.
Hyundai Solar Module
Mechanical Characteristics
Dimensions 998 mm (39.29”)(W) × 1,480 mm (58.27”)(L) × 35 mm (1.38”)(H)Weight Approx. 17.4 kg (38.4 lbs)Solar cells 54 cells in series (6 × 9 matrix) with PERL technology (Hyundai cell, Made in Korea)
Output cables 4 mm2 (12AWG) cables with polarized weatherproof connectors, IEC certiied (UL listed), Length 1.0 m (39.4”),
Junction box IP68, weatherproof, IEC certiied (UL listed)Bypass diodes 3 bypass diodes to prevent power decrease by partial shade
Construction Front : Anti-relective coating low-iron tempered glass, 3.2 mm (0.13”)Encapsulant : EVA Back Sheet : Weatherproof ilm
Frame Clear anodized aluminum alloy type 6063 (Black color)
Hyundai Heavy Industries was founded in 1972 and is a Fortune 500 company. The company employs more than 48,000 people, and has a global leading 7 business divisions with sales of 51.3 Billion USD in 2013. As one of our core businesses of the company, Hyundai Heavy Industries is committed to develop and invest heavily in the field of renewable energy. Hyundai Solar is the largest and the longest standing PV cell and module manufacturer in South Korea. We have 600 MW of module production capacity and provide high-quality solar PV products to more than 3,000 customers worldwide. We strive to achieve one of the most efficient PV modules by establishing an R&D laboratory and investing more than 20 Million USD on innovative technologies.
PERLRF-Series
Mono-crystalline TypeHiS-S245RF | HiS-S250RF | HiS-S255RF
58
※All data at STC (Standard Test Conditions). Above data may be changed without prior notice.
HiS-S RF
245 250 255Nominal output (Pmpp) W 245 250 255
Voltage at Pmax (Vmpp) V 28.3 28.5 28.6
Current at Pmax (Impp) A 8.6 8.8 8.9
Open circuit voltage (Voc) V 34.5 34.6 34.7
Short circuit current (Isc) A 9.2 9.4 9.5
Output tolerance % +3/-0
No. of cells & connections pcs 54 in series
Cell type - 6” Mono-crystalline silicon with PERL technology (Hyundai cell, Made in Korea)
Module eiciency % 16.6 16.9 17.2
Temperature coeicient of Pmpp %/K -0.45 -0.45 -0.45
Temperature coeicient of Voc %/K -0.33 -0.33 -0.33
Temperature coeicient of Isc %/K 0.032 0.032 0.032
| Mono-crystalline Type |
Nominal Operating Cell Temperature 46˚C ± 2
Operating Temperature -40 - 85˚C
Maximum System Voltage DC 1,000 V (IEC)DC 600 V (UL)
Maximum Reverse Current 15 A
A
B8 X Ø7
SLOT THRU
8 (0.32”)
DETAIL B
DETAIL A
SECTION C-C
35
(1.3
8”)
18 (0.71”)
11 (0.43”)
22.9
(0.9
”)
1.8 (0.07”)
1.8 (0.07”)
30 (1.18”)
(-)
1,000 mm
(39.37”)
4 mm2 CABLE &
CONNECTOR
(+)
GROUND
MARK
4 X Ø4.2
GROUND HOLE
C
C
4 X Ø7-L11
HOLES
49
4 (
19
.45
”)
253 (9.96”)
32
5 (
9.9
6”)
73
6 (2
8.9
7”)
47 (1.85”)
1,4
80
(5
8.2
7”)
998 (39.29”)
1,000 mm
(39.37”)
4 mm2 CABLE &
CONNECTOR
11
(0.4
3”)
4 (0
.16
”)
7.5 (0.3”)
5˚C
25˚C
45˚C
65˚C
00 10 15 255 20 30 35 4540 50
1
2
3
4
5
6
7
8
9
10
Current [A]
Voltage [V]
1,000 W/m2
800 W/m2
600 W/m2
400 W/m2
200 W/m2
00 5 10 15 20 25 30 35 40
1
2
3
4
5
6
7
8
9
10
Current [A]
Voltage [V]
| Module Diagram | | I-V Curves | (unit : mm, inch)
| Installation Safety Guide |
• Only qualified personnel should install or perform maintenance.• Be aware of dangerous high DC voltage.• Do not damage or scratch the rear surface of the module.• Do not handle or install modules when they are wet.
Electrical Characteristics
PERL : Passivated Emitter, Rear Locally-Diffused Cell
PERL Solar Cell Remark
Weight
P-type Si wafer
n++ n+ emitter
Al back electrode
p+ Al-LBSF
Ag front electrode
ARC
Enhancing quantum eiciency at short wavelength
Minimizing front contact resistance
Minimizing back side electron-hole pair recombination
Enhancing quantum eiciency at long wavelength
Minimizing back contact resistance
| Higher Cell Efficiency |
Conventional Selective-Emitter Cell : Max. 19.3 % → PERL Cell : Max. 20.4 %
| Higher Module Output |
245 W, 250 W, 255 W
| Lower Temperature Coefficient |
Lower output loss at higher temperature
| Affordable Price |
Premium mono-crystalline technology with affordable price
59
Mechanical Characteristics
Dimensions 998 mm (39.29”)(W) × 1,640 mm (64.57”)(L) × 35 mm (1.38”)(H)
Weight Approx. 18.7 kg (41.2 lbs)
Solar cells 60 cells in series (6 ×10 matrix) (Hyundai cell, Made in Korea)
Output cables4 mm2 (12AWG) cables with polarized weatherproof connectors,
IEC certiied (UL listed), Length 1.0 m (39.4”), MC4 compatible connectors
Junction box IP67, weatherproof, IEC certiied (UL listed)
Bypass diodes 3 bypass diodes to prevent power decrease by partial shade
ConstructionFront : High transmission low-iron tempered glass, 3.2 mm (0.13”)Encapsulant : EVA Back Sheet : Weatherproof ilm (Black)
Frame Clear anodized aluminum alloy type 6063 (Black)
Hyundai Solar Module
Black-BlackRG-Series Mono-crystalline Type
HiS-S250RG (BK) | HiS-S255RG (BK) | HiS-S260RG (BK) | HiS-S265RG (BK)
Multi-crystalline TypeHiS-M245RG (BK) | HiS-M250RG (BK) | HiS-M255RG (BK)
Hyundai Heavy Industries was founded in 1972 and is a Fortune 500 company. The company employs more than 48,000 people, and has a global
leading 7 business divisions with sales of 51.3 Billion USD in 2013. As one of our core businesses of the company, Hyundai Heavy Industries is
committed to develop and invest heavily in the field of renewable energy.
Hyundai Solar is the largest and the longest standing PV cell and module manufacturer in South Korea. We have 600 MW of module production
capacity and provide high-quality solar PV products to more than 3,000 customers worldwide. We strive to achieve one of the most efficient PV
modules by establishing an R&D laboratory and investing more than 20 Million USD on innovative technologies.
High Quality• IEC 61215 (Ed.2) and IEC 61730 Certified by VDE• Output power tolerance +3/-0 %• ISO 9001:2008, ISO 14001:2004 and ISO 50001:2011 Certified• OHSAS 18001:2007 Certified• Advanced Mechanical Test (5,400 Pa) Passed (IEC 61215) • IEC 62716 (Ammonia Corrosion Test) Certified• IEC 61701 (Salt Mist Corrosion Test) Certified
Accredited Test Lab• VDE (Test Data Acceptance Program)•UL (Witness Test Data Program)
Limited Warranty• 10 years for product defect• 10 years for 90 % of warranted min. power• 25 years for 80 % of warranted min. power
※ Important Notice on Warranty
The warranties apply only to the PV modules with Hyundai Heavy Industries Co., Ltd.'s
logo (shown below) and product serial number on it.
60
Electrical Characteristics
Nominal Operating Cell Temperature 46˚C ± 2
Operating Temperature -40 - 85˚C
Maximum System VoltageDC 1,000 V (IEC)DC 600 V (UL)
Maximum Reverse Current 15 A
7.5 (0.3”)
8 (0.32”)
4 (
0.1
6”)
11
(0
.43
”)
8-Ø7 SLOT THRU
SECTION C-C
DETAIL B
DETAIL A
18 (0.71”)11 (0.43”)
1,6
40
(6
4.5
7”)
A
B(+)(-)
1,000 mm
(39.37”)
4 mm2 CABLE &
CONNECTOR
1,000 mm
(39.37”)
4 mm2 CABLE &
CONNECTOR
GROUND MARK
4 X Ø4.2
GROUND HOLE
C
C
4 X Ø7-L11
HOLES
998 (39.29”)
54
8 (
21
.57
”)
954 (37.56”)
253 (9.96”)
36
0 (
14
.17
”)8
00
(3
1.4
9”)
60 (2.4”)
35
(1
.38
”)
30 (1.18”) 1.8 (0.07”)
| Module Diagram | | I-V Curves | (unit : mm, inch)
| Installation Safety Guide |
• Only qualified personnel should install or perform maintenance.• Be aware of dangerous high DC voltage.• Do not damage or scratch the rear surface of the module.• Do not handle or install modules when they are wet.
| Multi-crystalline Type |
※All data at STC (Standard Test Conditions). Above data may be changed without prior notice.
HiS-M RG (BK)
245 250 255
Nominal output (Pmpp) W 245 250 255
Voltage at Pmax (Vmpp) V 30.7 30.9 31.0
Current at Pmax (Impp) A 8.0 8.1 8.2
Open circuit voltage (Voc) V 37.3 37.4 37.6
Short circuit current (Isc) A 8.5 8.7 8.8
Output tolerance % +3/-0
No. of cells & connections pcs 60 in series
Cell type - 6” Multi-crystalline silicon (Hyundai cell, Made in Korea)
Module eiciency % 15.0 15.3 15.6
Temperature coeicient of Pmpp %/K -0.43 -0.43 -0.43
Temperature coeicient of Voc %/K -0.32 -0.32 -0.32
Temperature coeicient of Isc %/K 0.048 0.048 0.048
| Mono-crystalline Type |
※All data at STC (Standard Test Conditions). Above data may be changed without prior notice.
HiS-S RG (BK)
250 255 260 265
Nominal output (Pmpp) W 250 255 260 265
Voltage at Pmax (Vmpp) V 30.9 31.0 31.1 31.3
Current at Pmax (Impp) A 8.1 8.2 8.4 8.5
Open circuit voltage (Voc) V 37.6 37.8 37.9 38.1
Short circuit current (Isc) A 8.7 8.8 8.9 9.0
Output tolerance % +3/-0
No. of cells & connections pcs 60 in series
Cell type - 6” Mono-crystalline silicon (Hyundai cell, Made in Korea)
Module eiciency % 15.3 15.6 15.9 16.2
Temperature coeicient of Pmpp %/K -0.45 -0.45 -0.45 -0.45
Temperature coeicient of Voc %/K -0.33 -0.33 -0.33 -0.33
Temperature coeicient of Isc %/K 0.032 0.032 0.032 0.032
1,000 W/m2
00 5 10 15 20 25 30 35 40 45
1
2
3
4
5
6
7
8
9
10
5˚C
25˚C
45˚C
65˚C
00 10 20 30 40 50
1
2
3
4
5
6
7
8
9
10
Current [A]
Voltage [V]Current [A]
Voltage [V]
1,000 W/m2
800 W/m2
600 W/m2
400 W/m2
200 W/m2
61
Hyundai Solar Module
High Quality• IEC 61215 (Ed.2) and IEC 61730 Certified by VDE• UL listed (UL 1703), Class C Fire Rating• Output power tolerance +3/-0 %• ISO 9001:2008, ISO 14001:2004 and ISO 50001:2011 Certified• OHSAS 18001:2007 Certified• Advanced Mechanical Test (5,400 Pa) Passed (IEC 61215)
/ Mechanical Load Test (40 lbs/ft2) Passed (UL)• IEC 62716 (Ammonia Corrosion Test) Certified• IEC 61701 (Salt Mist Corrosion Test) Certified
Accredited Test Lab• VDE (Test Data Acceptance Program)• UL (Witness Test Data Program)
Limited Warranty• 10 years for product defect• 10 years for 90 % of warranted min. power• 25 years for 80 % of warranted min. power
※ Important Notice on Warranty The warranties apply only to the PV modules with Hyundai Heavy Industries Co., Ltd.'s
logo (shown below) and product serial number on it.
Mechanical Characteristics
Dimensions 998 mm (39.29”)(W) × 1,640 mm (64.57”)(L) × 35 mm (1.38”)(H)Weight Approx. 18.7 kg (41.2 lbs)Solar cells 60 cells in series (6 ×10 matrix) (Hyundai cell, Made in Korea)
Output cables 4 mm2 (12AWG) cables with polarized weatherproof connectors, IEC certiied (UL listed), Length 1.0 m (39.4”), MC4 compatible connectors
Junction box IP67, weatherproof, IEC certiied (UL listed)Bypass diodes 3 bypass diodes to prevent power decrease by partial shade
Construction Front : High transmission low-iron tempered glass, 3.2 mm (0.13”)Encapsulant : EVA Back Sheet : Weatherproof ilm
Frame Clear anodized aluminum alloy type 6063 (silver or black color)
Hyundai Heavy Industries was founded in 1972 and is a Fortune 500 company. The company employs more than 48,000 people, and has a global leading 7 business divisions with sales of 51.3 Billion USD in 2013. As one of our core businesses of the company, Hyundai Heavy Industries is committed to develop and invest heavily in the field of renewable energy. Hyundai Solar is the largest and the longest standing PV cell and module manufacturer in South Korea. We have 600 MW of module production capacity and provide high-quality solar PV products to more than 3,000 customers worldwide. We strive to achieve one of the most efficient PV modules by establishing an R&D laboratory and investing more than 20 Million USD on innovative technologies.
RG-Series Mono-crystalline TypeHiS-S260RG | HiS-S265RG | HiS-S270RG
Multi-crystalline TypeHiS-M250RG | HiS-M255RG | HiS-M260RG
62
Electrical Characteristics
※All data at STC (Standard Test Conditions). Above data may be changed without prior notice.
HiS-S RG
260 265 270Nominal output (Pmpp) W 260 265 270
Voltage at Pmax (Vmpp) V 31.1 31.3 31.4
Current at Pmax (Impp) A 8.4 8.5 8.6
Open circuit voltage (Voc) V 37.9 38.1 38.2
Short circuit current (Isc) A 8.9 9.0 9.2
Output tolerance % +3/-0
No. of cells & connections pcs 60 in series
Cell type - 6” Mono-crystalline silicon (Hyundai cell, Made in Korea)
Module eiciency % 15.9 16.2 16.5
Temperature coeicient of Pmpp %/K -0.45 -0.45 -0.45
Temperature coeicient of Voc %/K -0.33 -0.33 -0.33
Temperature coeicient of Isc %/K 0.032 0.032 0.032
| Mono-crystalline Type |
Nominal Operating Cell Temperature 46˚C ± 2
Operating Temperature -40 - 85˚C
Maximum System Voltage DC 1,000 V (IEC)DC 600 V (UL)
Maximum Reverse Current 15 A
7.5 (0.3”)
8 (0.32”)
4 (
0.1
6”)
11
(0
.43
”)
8-Ø7 SLOT THRU
SECTION C-C
DETAIL B
DETAIL A
18 (0.71”)11(0.43”)
1,6
40
(6
4.5
7”)
A
B(+)(-)
1,000 mm
(39.37”)
4 mm2 CABLE &
CONNECTOR
1,000 mm
(39.37”)
4 mm2 CABLE &
CONNECTOR
GROUND MARK
4 X Ø4.2
GROUND HOLE
C
C
4 X Ø7-L11
HOLES
998 (39.29”)
54
8 (
21
.57
”)
954 (37.56”)
253 (9.96”)
36
0 (
14
.17
”)8
00
(3
1.4
9”)
60 (2.4”)
35
(1
.38
”)
30 (1.18”) 1.8 (0.07”)
1,000 W/m2
00 5 10 15 20 25 30 35 40 45
1
2
3
4
5
6
7
8
9
10
5˚C
25˚C
45˚C
65˚C
00 10 20 30 40 50
1
2
3
4
5
6
7
8
9
10
Current [A]
Voltage [V]Current [A]
Voltage [V]
1,000 W/m2
800 W/m2
600 W/m2
400 W/m2
200 W/m2
| Module Diagram | | I-V Curves | (unit : mm, inch)
| Installation Safety Guide |
• Only qualified personnel should install or perform maintenance.• Be aware of dangerous high DC voltage.• Do not damage or scratch the rear surface of the module.• Do not handle or install modules when they are wet.
| Multi-crystalline Type |
※All data at STC (Standard Test Conditions). Above data may be changed without prior notice.
HiS-M RG
250 255 260Nominal output (Pmpp) W 250 255 260
Voltage at Pmax (Vmpp) V 30.9 31.0 31.1
Current at Pmax (Impp) A 8.1 8.2 8.4
Open circuit voltage (Voc) V 37.4 37.6 37.7
Short circuit current (Isc) A 8.7 8.8 8.9
Output tolerance % +3/-0
No. of cells & connections pcs 60 in series
Cell type - 6” Multi-crystalline silicon (Hyundai cell, Made in Korea)
Module eiciency % 15.3 15.6 15.9
Temperature coeicient of Pmpp %/K -0.43 -0.43 -0.43
Temperature coeicient of Voc %/K -0.32 -0.32 -0.32
Temperature coeicient of Isc %/K 0.048 0.048 0.048
63
Hyundai Solar Module
High Quality• IEC 61215 (Ed.2) and IEC 61730 Certified by VDE• Output power tolerance +3/-0 %• ISO 9001:2008, ISO 14001:2004 and ISO 50001:2011 Certified• OHSAS 18001:2007 Certified• Advanced Mechanical Test (5,400 Pa) Passed (IEC 61215)• IEC 62716 (Ammonia Corrosion Test) Certified• IEC 61701 (Salt Mist Corrosion Test) Certified
Accredited Test Lab• VDE (Test Data Acceptance Program)• UL (Witness Test Data Program)
Limited Warranty• 10 years for product defect• 10 years for 90 % of warranted min. power• 25 years for 80 % of warranted min. power
※ Important Notice on Warranty The warranties apply only to the PV modules with Hyundai Heavy Industries Co., Ltd.'s
logo (shown below) and product serial number on it.
Mechanical Characteristics
Dimensions 998 mm (39.29”)(W) × 1,640 mm (64.57”)(L) × 35 mm (1.38”)(H)Weight Approx. 18.7 kg (41.2 lbs)Solar cells 60 cells in series (6 ×10 matrix) with PERL technology (Hyundai cell, Made in Korea)
Output cables 4 mm2 (12AWG) cables with polarized weatherproof connectors, IEC certiied (UL listed), Length 1.0 m (39.4”), MC4 compatible connectors
Junction box IP67, weatherproof, IEC certiied (UL listed)Bypass diodes 3 bypass diodes to prevent power decrease by partial shade
Construction Front : Anti-relective coating low-iron tempered glass, 3.2 mm (0.13”)Encapsulant : EVA Back Sheet : Weatherproof ilm
Frame Clear anodized aluminum alloy type 6063 (Black color)
Hyundai Heavy Industries was founded in 1972 and is a Fortune 500 company. The company employs more than 48,000 people, and has a global leading 7 business divisions with sales of 49.9 Billion USD in 2014. As one of our core businesses of the company, Hyundai Heavy Industries is committed to develop and invest heavily in the field of renewable energy. Hyundai Solar is the largest and the longest standing PV cell and module manufacturer in South Korea. We have 600 MW of module production capacity and provide high-quality solar PV products to more than 3,000 customers worldwide. We strive to achieve one of the most efficient PV modules by establishing an R&D laboratory and investing more than 20 Million USD on innovative technologies.
PERLRG-Series
Mono-crystalline TypeHiS-S275RG | HiS-S280RG | HiS-S285RG
64
※All data at STC (Standard Test Conditions). Above data may be changed without prior notice.
HiS-S RG
275 280 285Nominal output (Pmpp) W 275 280 285
Voltage at Pmax (Vmpp) V 31.6 31.7 31.8
Current at Pmax (Impp) A 8.7 8.8 8.9
Open circuit voltage (Voc) V 38.4 38.5 38.7
Short circuit current (Isc) A 9.3 9.4 9.5
Output tolerance % +3/-0
No. of cells & connections pcs 60 in series
Cell type - 6” Mono-crystalline silicon with PERL technology (Hyundai cell, Made in Korea)
Module eiciency % 16.8 17.1 17.4
Temperature coeicient of Pmpp %/K -0.45 -0.45 -0.45
Temperature coeicient of Voc %/K -0.33 -0.33 -0.33
Temperature coeicient of Isc %/K 0.032 0.032 0.032
| Mono-crystalline Type |
Nominal Operating Cell Temperature 46˚C ± 2
Operating Temperature -40 - 85˚C
Maximum System Voltage DC 1,000 V (IEC)DC 600 V (UL)
Maximum Reverse Current 15 A
7.5 (0.3”)
8 (0.32”)
4 (
0.1
6”)
11
(0
.43
”)
8-Ø7 SLOT THRU
SECTION C-C
DETAIL B
DETAIL A
18 (0.71”)11 (0.43”)
1,6
40
(6
4.5
7”)
A
B(+)(-)
1,000 mm
(39.37”)
4 mm2 CABLE &
CONNECTOR
1,000 mm
(39.37”)
4 mm2 CABLE &
CONNECTOR
GROUND MARK
4 X Ø4.2
GROUND HOLE
C
C
4 X Ø7-L11
HOLES
998 (39.29”)
54
8 (
21
.57
”)
954 (37.56”)
253 (9.96”)
36
0 (
14
.17
”)8
00
(3
1.4
9”)
60 (2.4”)
35
(1
.38
”)
30 (1.18”) 1.8 (0.07”)
1,000 W/m2
00 5 10 15 20 25 30 35 40 45
1
2
3
4
5
6
7
8
9
10
5˚C
25˚C
45˚C
65˚C
00 10 15 255 20 30 35 4540 50
1
2
3
4
5
6
7
8
9
10
Current [A]
Voltage [V]Current [A]
Voltage [V]
1,000 W/m2
800 W/m2
600 W/m2
400 W/m2
200 W/m2
| Module Diagram | | I-V Curves | (unit : mm, inch)
| Installation Safety Guide |
• Only qualified personnel should install or perform maintenance.• Be aware of dangerous high DC voltage.• Do not damage or scratch the rear surface of the module.• Do not handle or install modules when they are wet.
Electrical Characteristics
PERL : Passivated Emitter, Rear Locally-Diffused Cell
PERL Solar Cell Remark
Weight
P-type Si wafer
n++ n+ emitter
Al back electrode
p+ Al-LBSF
Ag front electrode
ARC
Enhancing quantum eiciency at short wavelength
Minimizing front contact resistance
Minimizing back side electron-hole pair recombination
Enhancing quantum eiciency at long wavelength
Minimizing back contact resistance
| Higher Cell Efficiency |
Conventional Selective-Emitter Cell : Max. 19.3 % → PERL Cell : Max. 20.4 %
| Higher Module Output |
275 W, 280 W, 285 W
| Lower Temperature Coefficient |
Lower output loss at higher temperature
| Affordable Price |
Premium mono-crystalline technology with affordable price
65
Hyundai Solar Module
High Quality• IEC 61215 (Ed.2) and IEC 61730 Certified by VDE• UL listed (UL 1703), Class C Fire Rating• Output power tolerance +3/-0 %• Advanced Mechanical Test (5,400 Pa) Passed (IEC)
/ Mechanical Load Test (40 lbs/ft2) Passed (UL)• IEC 60068-2-68 (Dust and Sand Test) Certified• IEC 61701 (Salt Mist Corrosion Test) Certified
High Durability• Less corrosive effect against salty condition• Strengthening structure for waterproof• PID Resistant type
Limited Warranty• 10 years for product defect• 10 years for 90 % of warranted min. power• 25 years for 80 % of warranted min. power
※ Important Notice on Warranty The warranties apply only to the PV modules with Hyundai Heavy Industries Co., Ltd.'s
logo (shown below) and product serial number on it.
Mechanical Characteristics
Dimensions 998 mm (39.29”)(W) × 1,640 mm (64.57”)(L) × 35 mm (1.38”)(H)Weight Approx. 18.7 kg (41.2 lbs)Solar cells 60 cells in series (6 ×10 matrix) (Hyundai cell, Made in Korea)
Output cables 4 mm2 (12AWG) cables with polarized weatherproof connectors, IEC certiied (UL listed), Length 1.0 m (39.4”), MC4 compatible connectors
Junction box IP67, weatherproof, IEC certiied (UL listed)Bypass diodes 3 bypass diodes to prevent power decrease by partial shade
Construction Front : High transmission low-iron tempered glass, 3.2 mm (0.13”)Encapsulant : Polyoleine Back Sheet : Weatherproof ilm
Frame Clear anodized aluminum alloy type 6063
Hyundai Heavy Industries was founded in 1972 and is a Fortune 500 company. The company employs more than 48,000 people, and has a global leading 7 business divisions with sales of 49.9 Billion USD in 2014. As one of our core businesses of the company, Hyundai Heavy Industries is committed to develop and invest heavily in the field of renewable energy. Hyundai Solar is the largest and the longest standing PV cell and module manufacturer in South Korea. We have 600 MW of module production capacity and provide high-quality solar PV products to more than 3,000 customers worldwide. We strive to achieve one of the most efficient PV modules by establishing an R&D laboratory and investing more than 20 Million USD on innovative technologies.
RW-Series Mono-crystalline TypeHiS-S260RW | HiS-S265RW | HiS-S270RW
66
Electrical Characteristics
Nominal Operating Cell Temperature 46˚C ± 2
Operating Temperature -40 - 85˚C
Maximum System Voltage DC 1,000 V (IEC)DC 600 V (UL)
Maximum Reverse Current 15 A
80
0 (
31
.49
”)3
60
(1
4.1
7”)
253 (9.96”)
60 (2.4”)
954 (37.56”)
54
8 (
21
.57
”)
998 (39.29”)
1,6
40
(6
4.5
7”)
B
A
C
C
7.5 (0.3”)
11
(0
.43
”)
15 (0.59”)
30 (1.18”)
23
.7 (
0.9
3”)
1.5 (0.06”)
(+)(-)
1,000 mm (39.37”)
4 mm2 CABLE &
CONNECTOR
1,000 mm (39.37”)
4 mm2 CABLE &
CONNECTOR
GROUND MARK
4 X Ø4.2
GROUND HOLE
4 X Ø7-L11 HOLES
SECTION C-CDETAIL BDETAIL A
8-Ø7 SLOT THRU
8 (0.32”)
4 (
0.1
6”)
1.8 (0.07”)
35
(1
.38
”)
11 (0.43”)
1,000 W/m2
00 5 10 15 20 25 30 35 40 45
1
2
3
4
5
6
7
8
9
10
5˚C
25˚C
45˚C
65˚C
00 10 20 30 40 50
1
2
3
4
5
6
7
8
9
10
Current [A]
Voltage [V]
Current [A]
Voltage [V]
1,000 W/m2
800 W/m2
600 W/m2
400 W/m2
200 W/m2
| Module Diagram | | I-V Curves | (unit : mm, inch)
| Installation Safety Guide |
• Only qualified personnel should install or perform maintenance.• Be aware of dangerous high DC voltage.• Do not damage or scratch the rear surface of the module.• Do not handle or install modules when they are wet.
HiS-S RW
260 265 270Nominal output (Pmpp) W 260 265 270
Voltage at Pmax (Vmpp) V 31.0 31.2 31.4
Current at Pmax (Impp) A 8.4 8.5 8.6
Open circuit voltage (Voc) V 37.8 37.9 38.0
Short circuit current (Isc) A 8.9 9.0 9.1
Output tolerance % +3/-0
No. of cells & connections pcs 60 in series
Cell type - 6” Mono-crystalline silicon (Hyundai cell, Made in Korea)
Module eiciency % 15.9 16.2 16.5
Temperature coeicient of Pmpp %/K -0.45 -0.45 -0.45
Temperature coeicient of Voc %/K -0.33 -0.33 -0.33
Temperature coeicient of Isc %/K 0.032 0.032 0.032
| Mono-crystalline Type |
※All data at STC (Standard Test Conditions). Above data may be changed without prior notice.
67
All speciications and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may difer from actual products depending on local market requirements and regulations
Pole Mount PM-1-xPV-Module Mounting System Top of the Pole
CHARACTERISTICS � Total PV-Module* surface up to 8.5 m² /(91 ft²)
� Capacity of 1 to 6 framed PV-Modules*
� Fast and simple installation by one installer
� Statics calculated to European and American standards
� High reliability and life-expectancy
SUPPLY OPTIONS (cf. page 2) � 6 kits Pole Mount PM-1-x mounting structure without pole or beam
� 4 beam sizes, to be ordered separately
� 2 pole sizes, to be ordered separately
TECHNICAL DATA
Mounting Structure
� Ininitely variable Tilt-angle between 0° and 55°
� Horizontal rail orientation for ease of mounting by one installer
� Total PV-Module* surface up to 8.5 m² /(91 ft²)
� 1 to 6 framed PV-Modules* are mountable with dimensions up to 1.6 to 0.8 m / 63 to 32’’ or 1 to 5 framed PV-Modules* are mountable with dimensions up to 1.7 to 1.0 m / 76 to 40’’, larger modules possible but with reduced quantity and loads
� Flexible PV-Module* mounting sizes
� For PV-Module frame speciications see the dia-grams below
� Premium, corrosion-resistant material (stainless steel, Aluminum, hot dipped galvanized steel)
� Suitable for high wind speeds up to 130 km/h /80 mph, according to European and American standard
Foundation (not included)
� Concrete foundation with steel reinforcement (min. dimensions provided in the table on page 2)
PV-Module Frame Specifications
maximum clamping area must be smaller than 850 mm / 34 in
cross section of PV-Module frame
min. 15 mm / 0.6 in
min. 20 mm / 0.8 in
min. 1.2 mm / 0.05 in
*for framed PV-Modules according to IEC 61215, UL 1703
68
Solar Pump Accessories & Ancillaries
All speciications and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may difer from actual products depending on local market requirements and regulations
PM-1-x PM-1-1 PM-1-2 PM-1-3 PM-1-4 PM-1-5 PM-1-6
Item No. 19-004090 19-004100 19-004110 19-004120 19-004130 19-004140Qty. of PV-modulesSize 1.6 x 0.8 m 1 2 3 4 5 6Size 1.7 x 1.0 m 1 2 3 3 5 5
Beam 70-1 70-2 70-3 70-3 70-4 70-4
Item No. 19-004170 19-004180 19-004190 19-004190 19-004200 19-004200Cross section [mm] 70 x 2.9 70 x 2.9 70 x 2.9 70 x 2.9 70 x 5.0 70 x 5.0Length A [mm] 1100 2100 3400 3400 5200 5200
Pole 70-1 70-1** 114-1 114-1 114-1 114-1
Item No. 19-004150 19-004150 19-004160 19-004160 19-004160 19-004160Cross section [mm] 70 x 2.9 70 x 2.9 114.3 x 3.6 114.3 x 3.6 114.3 x 3.6 114.3 x 3.6Length [mm] 1900 1900 1900 1900 1900 1900
US Market
Beam US Standard pipe schedule 40Cross section [inch] 2.5
Length [inch] for the calculation of the beam length A see formula belowPole US Standard pipe schedule 40Cross section [inch] 2.5 4
Length [inch] 75
Foundation
Height [m] 0.5Height [ft] 1.64D x D [mm] 550 x 550 700 x 700 775 x 775 775 x775 925 x 925 925 x 925D x D [inch] 22 x 22 28 x 28 31 x 31 31 x 31 37 x 37 37 x 37
Dimensions with installed PV-modules 1.6 x 0.8 m and 1.7 x 1.0 m
Calculation of beam length A for local purchase
Metric in mm: A = n * w + (n+1) * 30 mm
Imperial in inch:A = n * w + (n+1) * 1.2 inch
n: Number of mounted PV-Modulesw: Width of PV-Module
** for PV-Modules of 1.7 x 1.0 m: max. tilt 45°
A
B
1.2
m /
3.9
ft
0.5
m /
1.64
ft
1.5
m /
5 ft
2 m
/ 6.
6 ft
Pole Mount System for installation of PV-Modules: 1.6 x 0.8 m / 63 x 32“ and 1.7 x 1.0 m / 76 x 40“
D D
69
tracking system ETATRACK active 600 ETATRACK active 1000-30 ETATRACK active H1500
PV module surface 6.0 m2 10.5 m2 16.5 m2
max. power installed c. 1.0 kWp c. 1.8 kWp c. 2.9 kWp
second axis manually adjustable, stepwise 0 – 50° fixed, 30°, other angles on request fixed, 0°
tracking system ETATRACK active 2500-A-30 ETATRACK active 2000-A ETATRACK active 1500-A
PV module surface 26 m2 20.5 m2 16.5 m2
max. power installed c. 4.6 kWp c. 3.6 kWp c. 2.9 kWp
second axis fixed, 30°, other angles on request manually adjustable, stepwise 0 – 45° manually adjustable, stepwise 0 – 45°
Single-axis Tracking Systems for PV Modules
LORENTZ ETATRACK active tracking systems
provide up to a 40 % higher yield from your
PV modules. ETATRACK systems follow the
sun through the day, this extends the time
that useful power levels are delivered and
maximises the peak power.
LORENTZ have been designing, manufacturing
and selling tracking systems since 1998 with
thousands of systems installed across the
world.
Benefits
� Single axis design for cost effectiveness,
reliability and efficiency
� Simple design for fast, failure-free installation
� High reliability and excellent serviceability
lowers cost of ownership
� Long life expectancy in line with PV modules
for predictable financial planning
� Short Return of Investment (ROI) cycle
� Very attractive business case against
fixed and dual axis PV installations
Features
� Single axis, 90° tracking angle East-West
� Robust hot Zinc-coated steel frame
� For ground installation on concrete foundation
� Stainless steel module fixings
� Maintenance-free DC linear drive
� Sensorless control
� Self-powered with very low energy consumption
� Control options to synchronise multiple units
� Designed for high wind speeds according to
German and European standards
ETATRACK active
Puranova Techavenue DWC-LLC
P.O. Box 390667- Dubai World Central - Dubai - United Arab Emirates - +971 4 553 4107All specifi cations and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may diff er from actual products depending on local market re-quirements and regulations. A pump system consists of a controller, motor and pump end. Multiple pumps/pump ends are shown to represent the wide range of pumps (over 104) that PuraNova Tech has.
To find out more visit www.puranovatech.com
70
The LORENTZ PS DataModule is an integral data
logger and remote control device for the whole
PS range of helical, centrifugal and surface pumps.
The PS DataModule and PumpScanner for Andro-
id™ App open new opportunities in drinking wa-
ter supply for people and livestock, irrigation and
swimming pool applications. The PS Data- Module
collects performance data from the pump system
and stores it for periodic collection.
PS DataModule and PumpScannerIntegrated Data Logger and Android™ App
Android is a trademark of Google Inc. The Android robot
is reproduced or modified from work created and shared
by Google and used according to terms described in the
Creative Commons 3.0 Attribution License.
Features
� Provides real-time and stored data for
� voltages
� currents
� input and output power
� flow rates
� operating time
� head
� pump speed
� cable losses
� temperature, and more
� Bluetooth™ connectivity for secure contactless data
transfer
� Stores up to 10 years of data (at 10 minute frequency)
� Two-way communication to control and program pump
speeds and operating times
� Connections for additional external sensors (flow and
pressure)
� LORENTZ PumpScanner for Android™ App for viewing
performance data
� PumpScanner is available in Customer and Service En-
gineer versions
Benefits
� Provides clear pump and water source performance in-
formation for monitoring and future planning
� Very professional diagnostic and information tools
available on low cost Android™ smart phones
� Reduces fault finding time and cost
� Identifies any pro-active service work that needs to be
carried out
for Android™
The PS DataModule uses Bluetooth™ to communicate
with the LORENTZ PumpScanner Android™ App allowing
secure real time data to be viewed and historic data to be
collected without physical connections.
The PS DataModule can be specificed on any PS pump
systems and is embedded in the pump controller. The
PumpScanner App service version is free to use for appro-
ved LORENTZ partners. A one off lifetime fee is payable to
activate the data logging services, activation can be made
at any time.
The PS DataModule opens up a new world of information
rich services previously unavailable at such an accessible
price proint.
Puranova Techavenue DWC-LLC
P.O. Box 390667- Dubai World Central - Dubai - United Arab Emirates - +971 4 553 4107All specifi cations and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may diff er from actual products depending on local market re-quirements and regulations. A pump system consists of a controller, motor and pump end. Multiple pumps/pump ends are shown to represent the wide range of pumps (over 104) that PuraNova Tech has.
To find out more visit www.puranovatech.com
71
The LORENTZ PS Communicator and pumpMANA-
GER service combine to offer customers a cost
effective full management and monitoring system
for their LORENTZ pump estate. This is attractive
to commercial farms, industrial processes, govern-
ment or NGO monitoring and anywhere that water
is critical to people, livestock or crops.
PS Communicator and pumpMANAGERRemote Communication Device and Cloud Management Service
The PS Communicator sends data from each pump across
the cellular (mobile) data network to a secure central web
server application called pumpMANAGER. The pump-
MANAGER application can be accessed from any web
connected device anywhere in the world making access to
information and control of your solar pumps simple and
convenient. As the connection is two way the pumps can
be programmed, speed controlled or switched off, provi-
ding full remote control. The pumpMANAGER application
also monitors the status of your LORENTZ pumps systems
and will alert you if there are any unexpected events.
Benefits
� Actively monitor your water critical processes and ap-
plications, perfect for drinking water, livestock or
irrigation
� Monitor exactly what is happening on remote sites
from one simple to use management screen
� Have control of the time and quantity of water that is
moved by your pumps from any web connected device
� Have access to ready integrated, information rich ser-
vices without the need to invest in expensive equip-
ment or infrastructure
� Allow your nominated service partner to gain access
remotely to diagnose any performance issues
� Pro-actively know when there is a problem and
achieve the fastest resolution with minimal impact on
your water supply
� Auto configuring, low cost simple to buy and
use service
Features
PS Communicator
� Self-contained controller and GPRS/cellular modem
� Solar powered with backup battery
� Automatically pairs with up to eight pumps that are in
Bluetooth range – pumps must have PS DataModu-
le installed
� Connects to each pump in turn and sends current run-
ning data and status via the Internet to a central server
� All data is encrypted and secure
� Local irradiation measurement
� Future proof design with over the air upgrades and
hardware for additional inputs and outputs
pumpMANAGER
� Remote monitoring configuration and management of
LORENTZ pumps
� Cloud based service for access from any internet
enabled device (PC, tablet or cellphone)
� Active reporting of any alerts or problems
� Ability to switch on, switch off, monitor external sen-
sors and control pump speed remotely
� Inclusive monthly fee for cellular data access, applica-
tion updates and web service
� Customer, manager and technician views
Puranova Techavenue DWC-LLC
P.O. Box 390667- Dubai World Central - Dubai - United Arab Emirates - +971 4 553 4107All specifi cations and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may diff er from actual products depending on local market re-quirements and regulations. A pump system consists of a controller, motor and pump end. Multiple pumps/pump ends are shown to represent the wide range of pumps (over 104) that PuraNova Tech has.
To find out more visit www.puranovatech.com
72
External Antenna for PS Communicator External antenna for the PS Communicator for areas with weak GSM signal
ORDER INFORMATION
Item no.: 19-003860 Product name: Antenna, external
FEATURES
Only in use with the PS Communicator
Accurate alignment of the antenna with the
PumpScanner software
TECHNICAL DATA
Frequency range: 824-960 / 1710-2170 Mhz
Connector: SMA-Male
Cable length/type: 3 m / SYV 75-3
Outer cable diameter: 5 mm
Manual with further information is available
in PartnerNet
Meets the requirements for CE
RELATED PRODUCTS
PS Communicator
Communication device for remote monitoring
and management of LORENTZ Pump Systems
Item no.: 19-000295
DIMENSION/WEIGHT Packing dimensions: 200 x 180 x 80 mm
7.9 x 7.1 x 3.1 in
Weight: 0.5 kg / 1.1 lbs
Puranova Techavenue DWC-LLC
P.O. Box 390667- Dubai World Central - Dubai - United Arab Emirates - +971 4 553 4107All specifi cations and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may diff er from actual products depending on local market re-quirements and regulations. A pump system consists of a controller, motor and pump end. Multiple pumps/pump ends are shown to represent the wide range of pumps (over 104) that PuraNova Tech has.
To find out more visit www.puranovatech.com
73
Float Switch Mechanically Activated Device for Water Level Detection in Applications
with LORENTZ Solar Pump Systems
The switch can be used to detect the water level within a tank. When the water level in the tank
reaches the maximum, the LORENTZ Controller will stop the pump and indicates Tank Full LED.
ORDER INFORMATION
Item no.: 19-000030 product name: Float Switch
FEATURES
N.O. (normally open) and N.C. (normally closed) function
Reliable water level detection
Simple to install
Trouble free operation
Not sensitive to rotation
Corrosion-free
TECHNICAL DATA
Operating temperature: -10°C to 55°C
Storage temperature: : -10°C to 55°C
Enclosure class: IP68
Cable length: 3m, waterproof
Wire size: 3x 1.0mm² or AWG 18
Meets the requirements for CE
DIMENSION/WEIGHT
Packaging dimensions: 230 x 160 x 55 mm
9.1 x 6.3 x 2.2 in
Total weight: 0.8 kg / 1.8 lbs
Puranova Techavenue DWC-LLC
P.O. Box 390667- Dubai World Central - Dubai - United Arab Emirates - +971 4 553 4107All specifi cations and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may diff er from actual products depending on local market re-quirements and regulations. A pump system consists of a controller, motor and pump end. Multiple pumps/pump ends are shown to represent the wide range of pumps (over 104) that PuraNova Tech has.
To find out more visit www.puranovatech.com
74
All specifications and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may differ from actual products depending on local market requirements and regulations
Liquid Level Sensor Sensor for measuring the level of liquid in a well or tank
USE / PURPOSE The range of liquid level sensors use pressure to measure the level or water in a well or tank. The sensors can be used
for collection of long term water level monitoring and also for pump control in applications where a well probe cannot
be used. The liquid Level Sensor must be used with a PS DataModule equipped controller with an appropriate license.
A license for the additional liquid level features is included with this item.
FEATURES For measuring levels of liquid in a well or tank
Accurate, robust sensor
For use with LORENTZ PumpScanner and pumpMANAGER
REQUIREMENTS A PS Controller with a PS DataModule or a PSk2 system, is required
The correct cable length must be ordered. The cable contains a ca-
pillary tube to balance the sensor against atmospheric changes so
this cable cannot be spliced
TECHNICAL DATA
Type: 2 wire
Sensor housing :AISI304
Connects to LORENTZ PS DataModule
Oil resistant cable
Output signal :4-20mA output
Voltage : 12-36VDC
Accuracy class :0.5% FS
Media temperature: 0 to 85C
Protection class: IP68
Meets the requirements for CE
ORDER INFORMATION
Item Sensor range Cable length
19-002230 0 to 10m
0 to 30ft
30m
100ft
19-002240 0 to 20m
0 to 60ft
40m
130ft
19-002245 0 to 20m
0 to 60ft
60m
200ft
19-002250 0 to 50m
0 to 160ft
60m
200ft
Puranova Techavenue DWC-LLC
P.O. Box 390667- Dubai World Central - Dubai - United Arab Emirates - +971 4 553 4107All specifi cations and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may diff er from actual products depending on local market re-quirements and regulations. A pump system consists of a controller, motor and pump end. Multiple pumps/pump ends are shown to represent the wide range of pumps (over 104) that PuraNova Tech has.
To find out more visit www.puranovatech.com
75
All specifications and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may differ from actual products depending on local market requirements and regulations
Liquid Pressure Sensor Sensor for measuring the pressure of liquid in a pipe or vessel
USE / PURPOSE The range of liquid pressure sensors are used to measure the pressure in a pipe. The sensors are commonly used to
measure the pressure at a well head or feeding into an irrigation systems. The liquid Pressure Sensor must be used
with a PS DataModule equipped controller with an appropriate license.
FEATURES For measuring pressure in a pipe or vessel
Accurate, robust sensor
For use with LORENTZ PumpScanner and pumpMANAGER
REQUIREMENTS A PS Controller with a PS DataModule or a PSk2 system, is required
Care must be taken to position the sensor without turbulent water
to ensure accurate measurement
G / ” fe ale th eaded filli g / ai ve t hole is e ui ed to ou t thesensor
TECHNICAL DATA
Type: 2 wire
Sensor housing :AISI304
Connects to LORENTZ PS DataModule
1m (3 ft) cable length
Output signal :4-20mA output
Voltage : 12-36VDC
Accuracy class :0.5% FS
Th ead type G / ” ale
ORDER INFORMATION
Item Description Sensor range
19-002740 Liquid Pressure Sensor,
LPS-500-1-1-1-1
0-500kPA
0 to 50m - 0 to 160ft
19-002750 Liquid Pressure Sensor,
LPS-1000-1-1-1-1
0-1000kPa
0 to 100m - 0 to 330ft
Puranova Techavenue DWC-LLC
P.O. Box 390667- Dubai World Central - Dubai - United Arab Emirates - +971 4 553 4107All specifi cations and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may diff er from actual products depending on local market re-quirements and regulations. A pump system consists of a controller, motor and pump end. Multiple pumps/pump ends are shown to represent the wide range of pumps (over 104) that PuraNova Tech has.
To find out more visit www.puranovatech.com
76
PM Accessory bracket Kit for mounting LORENTZ PS Controller / PV-
Disconnect to the Pole Mount PM-1-X
USE / PURPOSE
The PM Accessory bracket is designed for use with the LORENTZ
POLE MOUNT-1-X.
The Set allows an easy and flexible mounting of LORENTZ PS Con-
trollers and PV-Disconnect on the Pole of the LORENTZ PM-1-X
ORDER INFORMATION
Part Item No. PM-1-1 PM-1-2 PM-1-3 PM-1-4 PM-1-5 PM-1-6
PM Accessory bracket 4-1 19-004220 x x
PM Accessory bracket 2.5-1 19-004210 x x x x
FEATURES
Simple and cost effective mounting possibility for LORENTZ Controller and PV-Disconnect
Designed for LORENTZ Pole Mount 1-X
TECHNICAL DATA
A B C D Weight Item no.
PM-1- 1/2 70 -73 mm
2.5 in 8.5 x 37 mm
0.33 x 1.45 in
50 mm
2 in
300 mm
11.8 in
0.35 kg
0.77 lbs. 19-004220
PM-1- 3/4/5/6 114.3 mm
4 in
0.4 kg
0.88 lbs. 19-004210
Packing dimensions
305x170x25 mm
12x7x1 inch
Puranova Techavenue DWC-LLC
P.O. Box 390667- Dubai World Central - Dubai - United Arab Emirates - +971 4 553 4107All specifi cations and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may diff er from actual products depending on local market re-quirements and regulations. A pump system consists of a controller, motor and pump end. Multiple pumps/pump ends are shown to represent the wide range of pumps (over 104) that PuraNova Tech has.
To find out more visit www.puranovatech.com
77
PP600H AC PowerPack AC/DC Converter to Supply PS600, PS1200HR and specific PS1800HR
Pump Systems with Backup Power from a Generator or Mains Supply
ORDER INFORMATION
Item no.: 19-001040 product name: Power Pack 600H, UL
Item no.: 19-001060 product name: Power Pack 600H SS, UL
TECHNICAL DATA
AC input: 120V or 240V (±15 %), selectable,
47 to 63Hz
AC input current: 6.2A (120V) or 3.1A (240V)
PV input voltage: Vmp: 130V DC,
depending on pump controller max. voltages
PV max open circuit voltage: 200V DC
depending on pump controller max. voltages
DC output: 120V DC (no load), 700W
Overload protection: internal fuse, 15A
Enclosure: steel, gasket-sealed, indoor-use,
hinged front cover with key-lock
Must be protected from direct mid-day sun
Enclosure class: IP22
Ambient temperature: max. 45°C
All wires must be #14 AWG (2.5 mm²) or larger
Manual with further informations
is available in PartnerNet
Meets the requirements for CE
DIMENSION/WEIGHT
Packaging dimensions: 450 x 300 x 140 mm
17.7 x 11.8 x 5.5 in
Total weight: 16 kg / 35 lbs
Puranova Techavenue DWC-LLC
P.O. Box 390667- Dubai World Central - Dubai - United Arab Emirates - +971 4 553 4107All specifi cations and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may diff er from actual products depending on local market re-quirements and regulations. A pump system consists of a controller, motor and pump end. Multiple pumps/pump ends are shown to represent the wide range of pumps (over 104) that PuraNova Tech has.
To find out more visit www.puranovatech.com
78
PP2000 AC Power Pack AC/DC Converter to Supply PS1200C and specific PS1800 Pump Systems
with Backup Power from a Generator or Mains Supply
ORDER INFORMATION
Item no.: 19-001050 product name: Power Pack 2000, UL
Item no.: 19-001070 product name: Power Pack 2000 SS, UL
TECHNICAL DATA
AC input: 240V (±15 %), 47 to 63Hz
AC input current: 6.2A
PV input voltage: Vmp: 110V - 140V DC,
depending on pump controller max. voltages
PV max open circuit voltage: 200V DC
depending on pump controller max. voltages
DC output max.: 180V DC, 1,500W
Overload protection: internal fuse, 15A
Enclosure: steel, gasket-sealed, indoor-use,
hinged front cover with key-lock
Must be protected from direct mid-day sun
Enclosure class: IP22
Ambient temperature: max. 45°C
All wires must be #14 AWG (2.5 mm²) or larger
Manual with further informations
is available in PartnerNet
Meets the requirements for CE
DIMENSION/WEIGHT
Packaging dimensions: 450 x 300 x 140 mm
17.7 x 11.8 x 5.5 in
Total weight 23.5kg / 52lbs
Puranova Techavenue DWC-LLC
P.O. Box 390667- Dubai World Central - Dubai - United Arab Emirates - +971 4 553 4107All specifi cations and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may diff er from actual products depending on local market re-quirements and regulations. A pump system consists of a controller, motor and pump end. Multiple pumps/pump ends are shown to represent the wide range of pumps (over 104) that PuraNova Tech has.
To find out more visit www.puranovatech.com
79
PP4000 AC PowerPack AC/DC Converter to Supply PS4000 Pump Systems with Backup Power
from a Generator or Mains Supply
ORDER INFORMATION
Item no.: 19-000180 product name: Power Pack 4000
TECHNICAL DATA
3-Phase AC input: 380V (±20 %), 45 to 65Hz
DC output: 190-286V, 5.7kW
DC output rated current: 20A @ 230V DC
Must be protected from direct mid-day sun
IP42
Ambient temperature: –5 to 45°C
Efficiency up to 94%
Passive cooling, no fan
All wires must be #14 AWG (2.5 mm²) or larger
Manual with further informations
is available in PartnerNet
Meets the requirements for CE
DIMENSION/WEIGHT
Packaging dimensions: 332 x 210 x 202 mm
15.7 x 8.7 x 8.3 in
Total weight: 14.5 kg / 30 lbs
Puranova Techavenue DWC-LLC
P.O. Box 390667- Dubai World Central - Dubai - United Arab Emirates - +971 4 553 4107All specifi cations and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may diff er from actual products depending on local market re-quirements and regulations. A pump system consists of a controller, motor and pump end. Multiple pumps/pump ends are shown to represent the wide range of pumps (over 104) that PuraNova Tech has.
To find out more visit www.puranovatech.com
80
Pressure Switch Device for Water Pressure Detection in Applications with LORENTZ Solar
Pump Systems
The switch can be used to detect the water level within a tank. When the water level in the tank
reaches the maximum, the pressure will increase and the LORENTZ Controller will stop the pump and
indicates Tank Full LED.
ORDER INFORMATION
Item no.: 19-000310 product name: Pressure Switch 1-5bar
FEATURES
Reliable water pressure detection
Simple to install
Trouble free operation
Corrosion-free
TECHNICAL DATA
Pressure range between 1 and 5 bar
2x cable gland Ø 5-9mm
G ¼’’ pipe thread Meets the requirements for CE
DIMENSION/WEIGHT
Packaging dimensions: 130 x 105 x 65 mm
5.1 x 4.2 x 2.6 in
Total weight: 0.5 kg / 1 lbs
Puranova Techavenue DWC-LLC
P.O. Box 390667- Dubai World Central - Dubai - United Arab Emirates - +971 4 553 4107All specifi cations and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may diff er from actual products depending on local market re-quirements and regulations. A pump system consists of a controller, motor and pump end. Multiple pumps/pump ends are shown to represent the wide range of pumps (over 104) that PuraNova Tech has.
To find out more visit www.puranovatech.com
81
PS BOOST Inline Filter Inline Filter for use with PS Boost Pumps
PS BOOST Pump Systems are designed for clean water conditions. A PS BOOST Inline Filter must be
installed in the suction pipeline to protect the pump from sand, clay or other solids.
ORDER INFORMATION
Item no.: 19-000200 product name: Inline Filter ” PS 5 BOOST
Item no.: 19-000210 product name: Filter cartridge ” PS 5 BOOST
FEATURES
Simple to install with included wall holder kit
Clear bowl for easy maintenance
Additional spare filter cartridges can be ordered
TECHNICAL DATA
Inlet: female NPT / ” Outlet: female NPT 1/2” Max. filter cartridge size: 9 7/8 in
20-micron spun polypropylene filter cartridges
Max. water temperature: 50°C (120°F)
Max. working pressure: 6 bar
Meets the requirements for CE
DIMENSION/WEIGHT
Packaging dimensions: 450 x 250 x 250 mm
17.7 x 9.8 x 9.8 in
Total weight 2.0 kg / 4.4 lbs
Puranova Techavenue DWC-LLC
P.O. Box 390667- Dubai World Central - Dubai - United Arab Emirates - +971 4 553 4107All specifi cations and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may diff er from actual products depending on local market re-quirements and regulations. A pump system consists of a controller, motor and pump end. Multiple pumps/pump ends are shown to represent the wide range of pumps (over 104) that PuraNova Tech has.
To find out more visit www.puranovatech.com
82
PS BOOST Installation Kit Control unit for use in pressurizing applications
The PS BOOST Installation Kit can be used for any application where a pressure tank is required. If the
pressure increases to the maximum, the LORENTZ PS Controller will stop the pump and indicates
Tank Full LED.
ORDER INFORMATION
Item no.: 19-000190 product name: PS BOOST Inst. Kit
FEATURES
Unit consist of the LORENTZ Pressure Switch,
a check valve, a pressure gauge, a pressure relief
valve, two ball valves and two short pipes
Reliable water pressure detection
Trouble free operation
Corrosion-free
TECHNICAL DATA
Min. cut-in: 1bar
Max. cut-out: 5bar
Pressure relief valve: 5.3bar
Enclosure class: IP44
Inlet: female G / ” Outlet: male G1/2”
Meets the requirements for CE
DIMENSION/WEIGHT
Packing dimensions: 600 x 320 x 170 mm
23.6 x 12.6 x 6.7 in
Total weight 5.0 kg / 11.0 lbs
installation sample
Puranova Techavenue DWC-LLC
P.O. Box 390667- Dubai World Central - Dubai - United Arab Emirates - +971 4 553 4107All specifi cations and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may diff er from actual products depending on local market re-quirements and regulations. A pump system consists of a controller, motor and pump end. Multiple pumps/pump ends are shown to represent the wide range of pumps (over 104) that PuraNova Tech has.
To find out more visit www.puranovatech.com
83
PV Combiner 1000-125-4 Connection box for parallel wiring
ORDER INFORMATION
Item no.: 19-000116
Product name: PV Combiner 1000-125-4
FEATURES
Designed for PSk pump systems
For professional installation of pumping
Systems
TECHNICAL DATA
Wiring for up to 4 input-strings in parallel
Combine two or
more PV Disconnect 1000-40-5 units
Enclosure class IP 54
Meets the requirements for CE
PV Combiner 1000-125-4
Max. voltage 1,000 V DC
Max. current per string 125 A
Max. total current 125 A
Max. no. of strings 4
String cable size 10 - 35mm²
Output cable size 10 - 35mm²
RELATED PRODUCTS
PV Disconnect 1000-40-5
Five string connection box with DC Disconnect
Switch
Item no.: 19-000115
PV Protect 1000-125
Surge protection device for PV systems
Item no.: 19-000117
DIMENSION/WEIGHT [mm]
Net. Weight: 2,0kg
PG cable glands (10x PG16)
Puranova Techavenue DWC-LLC
P.O. Box 390667- Dubai World Central - Dubai - United Arab Emirates - +971 4 553 4107All specifi cations and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may diff er from actual products depending on local market re-quirements and regulations. A pump system consists of a controller, motor and pump end. Multiple pumps/pump ends are shown to represent the wide range of pumps (over 104) that PuraNova Tech has.
To find out more visit www.puranovatech.com
84
PV Disconnect 440-40-1 Box with DC Disconnect Switch and optional lightning surge protection
ORDER INFORMATION
Item no.: 19-000137 product name: PV Disconnect 440-40-1
Item no.: 19-002120 product name: MNSPD-115
Item no.: 19-002130 product name: MNSPD-300
Item no.: 19-002140 product name: MNSPD-600
Lightning surge protectors must be ordered separately
FEATURES
Designed for PS150 – PS4000
For professional installation of pumping
systems
TECHNICAL DATA
DC rated disconnect switch enclosed
Enclosure class IP 54
Meets the requirements for CE
PV Disconnect 440-20-1
Max. voltage 440 V DC
Max. current 40 A
String cable size 4 - 10 mm²
Output cable size 4 - 10 mm²
Optional lightning surge protector
Connects through an existing mounting hole
in the PV connect housing
Proper grounding of the device is mandatory
to achieve protection
Controller MidNite surge protector
PS150 – PS200 MNSPD115
PS600 – PS1800 MNSPD300
PS4000 MNSPD600
DIMENSION/WEIGHT [mm]
Net. Weight: 1,4kg (+0,35kg)
Optional lightning protection
PG cable glands (4x PG11 1x M16)
Mounting hole (1x PG16 cap)
Optional lightning protection
Puranova Techavenue DWC-LLC
P.O. Box 390667- Dubai World Central - Dubai - United Arab Emirates - +971 4 553 4107All specifi cations and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may diff er from actual products depending on local market re-quirements and regulations. A pump system consists of a controller, motor and pump end. Multiple pumps/pump ends are shown to represent the wide range of pumps (over 104) that PuraNova Tech has.
To find out more visit www.puranovatech.com
85
PV Disconnect 440-40-6 Connection box with DC Disconnect Switch and optional lightning surge protection
ORDER INFORMATION
Item no.: 19-000136 product name: PV Disconnect 440-40-6
Item no.: 19-002120 product name: MNSPD-115
Item no.: 19-002130 product name: MNSPD-300
Item no.: 19-002140 product name: MNSPD-600
Lightning surge protectors must be ordered separately
FEATURES
Designed for PS150 – PS4000
For professional installation of pumping
systems
TECHNICAL DATA
Wiring up to 6 PV-strings in parallel
DC rated disconnect switch enclosed
Enclosure class IP 54
Meets the requirements for CE
PV Disconnect 440-40-6
Max. voltage 440 V DC
Max. current per string 10 A
Max. total current 40 A
Max. no. of strings 6
String cable size 2,5 - 4mm²
Output cable size 4 - 10mm²
Optional lightning surge protector
Connects through an existing mounting
hole in the PV connect housing
Proper grounding of the device is manda-
tory to achieve protection
Controller MidNite surge protector
PS150 – PS200 MNSPD115
PS600 – PS1800 MNSPD300
PS4000 MNSPD600
DIMENSION/WEIGHT [mm]
Optional lightning protection
Net. Weight: 2,15kg (+0,35kg)
Optional lightning protection
PG cable glands (2x PG11 13x M16)
Mounting hole (1x PG16 cap)
Puranova Techavenue DWC-LLC
P.O. Box 390667- Dubai World Central - Dubai - United Arab Emirates - +971 4 553 4107All specifi cations and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may diff er from actual products depending on local market re-quirements and regulations. A pump system consists of a controller, motor and pump end. Multiple pumps/pump ends are shown to represent the wide range of pumps (over 104) that PuraNova Tech has.
To find out more visit www.puranovatech.com
86
PV Disconnect 1000-40-5 Five string connection box with DC Disconnect Switch
ORDER INFORMATION
Item no.: 19-000115
Product name: PV Disconnect 1000-40-5
FEATURES
Simple and cost effective unit to connect
up to five module strings
Includes an appropriate DC rated disconnect switch
Designed for PSk2 / PSk pump systems
Used as part of a professional system installation
TECHNICAL DATA
Wiring of up to 5 PV-strings in parallel
DC rated disconnect switch enclosed
Enclosure class IP 54
Meets the requirements for CE
PV Disconnect 1000-40-5
Max. voltage 1,000 V DC (Uoc)
880 V DC (Ump)
Max. current per string 40 A
Max. total current 40 A
Max. no. of strings 5
String cable size 4 - 10mm²
Output cable size 4 - 16mm²
RELATED PRODUCTS
PV Combiner 1000-125-4
Connection Box for parallel wiring of two or
more PV Disconnect 1000-40-5
Item no.: 19-000116
PV Protect 1000-125
Surge protection device for PV systems
Item no.: 19-000117
DIMENSION/WEIGHT [mm]
Net. Weight: 2,50kg
PG cable glands (2x PG11 10x M16)
Puranova Techavenue DWC-LLC
P.O. Box 390667- Dubai World Central - Dubai - United Arab Emirates - +971 4 553 4107All specifi cations and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may diff er from actual products depending on local market re-quirements and regulations. A pump system consists of a controller, motor and pump end. Multiple pumps/pump ends are shown to represent the wide range of pumps (over 104) that PuraNova Tech has.
To find out more visit www.puranovatech.com
87
LC20-12M for
PS Communicator application PV module LC20-12M, pre-wired, with fixture, for power supply and
irradiation measurement of the PS Communicator
ORDER INFORMATION
Item no.: 23-000255 product name: LC20-12M, PV-Module, Pre-wired, with Fixture
can be ordered in connection with PS Communicator only
FEATURES
Only for use in combination with PS Communicator:
Reliable battery charging
Accurate irradiation measurement
Sturdy, clear-anodized aluminum frame
Pre-wired cable for easy installation
Fixture device included
TECHNICAL DATA
Peak Power 20 Wp
Max. power current 1.2 A
Max. power voltage 17.2 V
Short circuit current 1.3 A
Open circuit voltage 21.6 V
Meets the requirements for IEC and CE
DIMENSION/WEIGHT
Packaging dimensions: 750 x 310 x 40 mm
29.5 x 12.2 x 1.6 in
Total weight: 3.5 kg / 7.7 lbs
Puranova Techavenue DWC-LLC
P.O. Box 390667- Dubai World Central - Dubai - United Arab Emirates - +971 4 553 4107All specifi cations and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may diff er from actual products depending on local market re-quirements and regulations. A pump system consists of a controller, motor and pump end. Multiple pumps/pump ends are shown to represent the wide range of pumps (over 104) that PuraNova Tech has.
To find out more visit www.puranovatech.com
88
PV Protect 1000-125 Surge protective device for PV systems
ORDER INFORMATION
Item no.: 19-000117
Product name: PV Protect 1000-125
FEATURES
Provides enhanced level of protection to the PSk
controller from electrical surges (indirect lightning)
Designed for PSk2 / PSk pump systems
Used as part of a professional system installation
Installed on the DC input line close to pump controller
Requires a reliable ground connection to operate
TECHNICAL DATA
Connects between PV Generator and Controller
Enclosure class IP 54
Meets the requirements for CE
PV Protect 1000-125
Max. voltage 1,000 V DC
Max. current 125 A
Input cable size 10 - 35mm²
Output cable size 10 - 35mm²
Grounding cable size 16 mm²
RELATED PRODUCTS
PV Disconnect 1000-40-5
Five string DC connection box with DC discon-
nect
Item no.: 19-000115
PV Combiner 1000-125-4
Combiner box for parallel wiring of two or
more PV Disconnect 1000-40-5 units
Item no.: 19-000116
DIMENSION/WEIGHT [mm]
Net. Weight: 1,5kg
PG cable glands (5x PG16)
Puranova Techavenue DWC-LLC
P.O. Box 390667- Dubai World Central - Dubai - United Arab Emirates - +971 4 553 4107All specifi cations and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may diff er from actual products depending on local market re-quirements and regulations. A pump system consists of a controller, motor and pump end. Multiple pumps/pump ends are shown to represent the wide range of pumps (over 104) that PuraNova Tech has.
To find out more visit www.puranovatech.com
89
Sacrificial Anode for HR Pump Zinc sacrificial anode for corrosion protection of HR pump ends
USE / PURPOSE
The LORENTZ Sacrificial Anode is designed for use with LORENTZ pump ends. Where solar pump ends operate in aggres-
sive water conditions acidic water can attacks the passive layer of the high quality-steel pump end. This corrosion re-
duces the life time of the product. The LORENTZ Sacrificial Anode protects the pump system from this type of corrosion
and extends the pump life
ORDER INFORMATION
Item no.: 19-002621 Product name: Anode, Sacrificial Zink Anode, Di42mm
Item no.: 19-002622 Product name: Anode, Sacrificial Zink Anode, Di48mm
FEATURES
Simple and cost effective part to protect the pump end from corrosion
Designed for HR pump ends
TECHNICAL DATA
A B C Weight Surface Item no.
HR03/04/05 48 mm
1,89 in
88 mm
3,46 in 70 mm
2,76 in
1,76 kg
3,88 lbs
59100 mm²
91,61 in² 19-002622
HR07/10/14/23/32 42 mm
1,65 in
82 mm
3,23 in
1,68 kg
3,70 lbs
55500 mm²
86,01 in² 19-002621
Puranova Techavenue DWC-LLC
P.O. Box 390667- Dubai World Central - Dubai - United Arab Emirates - +971 4 553 4107All specifi cations and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may diff er from actual products depending on local market re-quirements and regulations. A pump system consists of a controller, motor and pump end. Multiple pumps/pump ends are shown to represent the wide range of pumps (over 104) that PuraNova Tech has.
To find out more visit www.puranovatech.com
90
Cable Splice Kit 2.5 to 6 mm² Kit for Permanently Insulate and Seal Cable Splice
ORDER INFORMATION
Item no.: 19-000010 product name: Cable splice kit 2.5-6sqmm
FEATURES
Efficient watertight seal
Simple to install
High quality components
Kit for wire sizes from 2.5 to 6 mm²
INCLUDED IN DELIVERY Four splices per kit:
4 pcs. crimp sleeves
4 pcs. small shrink sleeves
1 pc. large shrink sleeve
Assembly instruction
DIMENSION/WEIGHT
Packaging dimensions: 400 x 120 x 30 mm
15.8 x 4.7 x 1.2 in
Total weight: 0.1 kg / 0.2 lbs
Puranova Techavenue DWC-LLC
P.O. Box 390667- Dubai World Central - Dubai - United Arab Emirates - +971 4 553 4107All specifi cations and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may diff er from actual products depending on local market re-quirements and regulations. A pump system consists of a controller, motor and pump end. Multiple pumps/pump ends are shown to represent the wide range of pumps (over 104) that PuraNova Tech has.
To find out more visit www.puranovatech.com
91
Cable Splice Kit 6 to 10 mm² Kit for Permanently Insulate and Seal Cable Splice
ORDER INFORMATION
Item no.: 19-000020 product name: Cable splice kit 6-10sqmm
FEATURES
Efficient watertight seal
Simple to install
High quality components
Kit for wire sizes from 6 to 10 mm²
INCLUDED IN DELIVERY Four splices per kit:
4 pcs. crimp sleeves
4 pcs. small shrink sleeves
1 pc. large shrink sleeve
Assembly instruction
DIMENSION/WEIGHT
Packaging dimensions: 400 x 120 x 30 mm
15.8 x 4.7 x 1.2 in
Total weight: 0.1 kg / 0.2 lbs
Puranova Techavenue DWC-LLC
P.O. Box 390667- Dubai World Central - Dubai - United Arab Emirates - +971 4 553 4107All specifi cations and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may diff er from actual products depending on local market re-quirements and regulations. A pump system consists of a controller, motor and pump end. Multiple pumps/pump ends are shown to represent the wide range of pumps (over 104) that PuraNova Tech has.
To find out more visit www.puranovatech.com
92
Stilling Tube for C Pump Device to protect the pump from dirt
Where water sources contain sand or have the potential for dirt falling into them (uncapped wells) a
stilling tube is recommended to protect the pump from the dirt.
ORDER INFORMATION
Item no.: 19-000230 product name: Stilling Tube for Centrifugal Pump
Item no.: 19-000250 product name: Stilling Tube Adaptor for Centrifugal Pump
FEATURES
Due to the large inner diameter of the stilling tube the water
rises very slow, the dirt settles down at the bottom of the well
Pump has to handle less sand, which will increase
the pu p’s life span Trouble free installation
Can be used with PS150-PS4000 C-SJ 4” Pumps
Min. borehole diameter of 6 in (150mm) needed
SCOPE OF DELIVERY
(1) 1x stilling tube adapter
(2) 2x hose clamp
(3) 2x cable straps
(4) 1x PVC tube: ø140x4, 500 mm length
Product can be ordered without the PVC tube,
then the tube must be purchased locally
DIMENSION/WEIGHT
Complete Stilling Tube device:
Packaging dimensions: 650 x 160 x 140 mm
25.6 x 6.3 x 5.5 in
Total weight: 3.0 kg / 6.61 lbs
Stilling Tube Adaptor (without PVC tube):
Packaging dimensions: 300 x 160 x 140 mm
11.8 x 6.3 x 5.5 in
Total weight: 1.0 kg / 2.20 lbs
Puranova Techavenue DWC-LLC
P.O. Box 390667- Dubai World Central - Dubai - United Arab Emirates - +971 4 553 4107All specifi cations and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may diff er from actual products depending on local market re-quirements and regulations. A pump system consists of a controller, motor and pump end. Multiple pumps/pump ends are shown to represent the wide range of pumps (over 104) that PuraNova Tech has.
To find out more visit www.puranovatech.com
93
Stilling Tube for HR Pump Device to protect the pump from dirt
Where water sources contain sand or have the potential for dirt falling into them (uncapped wells) a
stilling tube is recommended to protect the pump from the dirt.
ORDER INFORMATION
Item no.: 19-000220 product name: Stilling Tube for HR Pump
Item no.: 19-000240 product name: Stilling Tube Adaptor for HR Pump
FEATURES
Due to the large inner diameter of the stilling tube the water
rises very slow, the dirt settles down at the bottom of the well
Pump has to handle less sand, which will increase
the pu p’s life span Trouble free installation
Can be used with PS200-PS4000 HR Pumps
Min. borehole diameter of 6 in (150mm) needed
SCOPE OF DELIVERY
(1) 1x stilling tube adapter
(2) 2x hose clamp
(3) 4x countersunk bolt M6x20
(4) 1x PVC tube: ø125x5, 800 mm length
Product can be ordered without the PVC tube,
then the tube must be purchased locally
DIMENSION/WEIGHT
Complete Stilling Tube device:
Packaging dimensions: 850 x 160 x 140 mm
33.5 x 6.3 x 5.5 in
Total weight: 4.0 kg / 8.82 lbs
Stilling Tube Adaptor (without PVC tube):
Packaging dimensions: 300 x 160 x 140 mm
11.8 x 6.3 x 5.5 in
Total weight: 1.0 kg / 2.20 lbs
Puranova Techavenue DWC-LLC
P.O. Box 390667- Dubai World Central - Dubai - United Arab Emirates - +971 4 553 4107All specifi cations and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may diff er from actual products depending on local market re-quirements and regulations. A pump system consists of a controller, motor and pump end. Multiple pumps/pump ends are shown to represent the wide range of pumps (over 104) that PuraNova Tech has.
To find out more visit www.puranovatech.com
94
SunSwitch Automatic Solar Level Switching Device
The SunSwitch can be used for any application where you need to switch depending on the solar
intensity. It is an autonomous working unit that supplies itself with power from the PV-module on its
rear side.
ORDER INFORMATION
Item no.: 19-000050 product name: SUN SWITCH Light-Sensor
FEATURES
Trouble free operation
Pump will only run when minimum flow rates or
pressure levels can be achieved which are required
by certain applications
Reduced wear on the pump and motor since the
pump only starts when it will continue to run
TECHNICAL DATA
Contact rating:
Max. voltage 250 VAC / 220 VDC
Max. current 2A
Max. power 60 W / 62.5 VA
Enclosure class: IP54
Cable length: 4 m
Wire size: 3x 1.0mm² or AWG 18, waterproofed
Mounted close to the solar array
Manual with further informations
is available in PartnerNet
Meets the requirements for CE
DIMENSION/WEIGHT
Packaging dimensions: 230 x 115 x 90 mm
9.1 x 4.5 x 3.5 in
Total weight: 1.2 kg / 0.6 lbs
Puranova Techavenue DWC-LLC
P.O. Box 390667- Dubai World Central - Dubai - United Arab Emirates - +971 4 553 4107All specifi cations and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may diff er from actual products depending on local market re-quirements and regulations. A pump system consists of a controller, motor and pump end. Multiple pumps/pump ends are shown to represent the wide range of pumps (over 104) that PuraNova Tech has.
To find out more visit www.puranovatech.com
95
Surge Protector Device to Protect LORENTZ Pump Accessories from Voltage Spikes
ORDER INFORMATION
Item no.: 19-000280 product name: Surge Protector
FEATURES
Reliable surge protection for all
LORENTZ pump accessories
Can be installed inside the PS Controller
TECHNICAL DATA
Max. voltage: 14 VDC
Max current 8/20µs: 500 A
Enclosure class: IP65
Ambient temperature: max. 50°C
Wire size: 2x 1.5mm² or AWG 16
Meets the requirements for CE
DIMENSION/WEIGHT
Packing dimensions: 70 x 45 x 20 mm
2.8 x 1.8 x 0.8 in
Total weight 0.1 kg / 0.2 lbs
Puranova Techavenue DWC-LLC
P.O. Box 390667- Dubai World Central - Dubai - United Arab Emirates - +971 4 553 4107All specifi cations and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may diff er from actual products depending on local market re-quirements and regulations. A pump system consists of a controller, motor and pump end. Multiple pumps/pump ends are shown to represent the wide range of pumps (over 104) that PuraNova Tech has.
To find out more visit www.puranovatech.com
96
Water Meter Device to measure the water flow rate
ORDER INFORMATION
Item no.: 19-002160 product name: Water Meter, WP-DN40, 0.1cbm/p
Item no.: 19-002170 product name: Water Meter, WP-DN65, 0.1cbm/p
Item no.: 19-002180 product name: Water Meter, WP-DN80, 0.1cbm/p
Item no.: 19-002190 product name: Water Meter, WP-DN100, 0.1cbm/p
Item no.: 19-002200 product name: Water Meter, WP-DN125, 0.1cbm/p
Item no.: 19-002210 product name: Water Meter, WP-DN150, 1cbm/p
Item no.: 19-002202 product name: Water Meter, WP-DN200, 1cbm/p
FEATURES
Dry dial register ensures clear reading
Low pressure loss, long working life
Easy to install
Only for use in combination with DataModule:
The water meter is equipped with a reed switch
assembly which can be connected to the DataModule
TECHNICAL DATA
Water temperature: max. 40°C
Water pressure: max. 16 bar
Meets the requirements for CE
Nominal Diameter DN 40 65 80 100 125 150 200
Max. flow rate [m³/h] Qmax 20 50 80 120 200 300 500
Nominal flow rate [m³/h] Qn 10 25 40 60 100 150 250
Transition flow rate [m³/h] Qt 3.0 5.0 8.0 12 20 30 50
Minimum flow rate [m³/h] Qmin 0.7 0.75 1.2 1.8 3.0 4.5 7.5
97
DIMENSION/WEIGHT
Nominal Diameter DN 40 65 80 100 125 150 200
Length [mm] L 260 200 225 250 250 300 350
Height [mm] H 225 242 252 262 275 325 355
Working height [mm] H1 303 313 323 333 346 396 426
Height [mm] G 360 360 360 360 360 420 420
Outside diameter [mm] D 150 185 200 220 250 285 340
Circle diameter [mm] D1 110 145 160 180 210 240 295
Connecting bolt quantity 4xM16 4xM16 8xM16 8xM16 8xM16 8xM20 12xM20
Weight [kg] 12 13 16 18 20 42 74
Puranova Techavenue DWC-LLC
P.O. Box 390667- Dubai World Central - Dubai - United Arab Emirates - +971 4 553 4107All specifi cations and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may diff er from actual products depending on local market re-quirements and regulations. A pump system consists of a controller, motor and pump end. Multiple pumps/pump ends are shown to represent the wide range of pumps (over 104) that PuraNova Tech has.
To find out more visit www.puranovatech.com
98
Water Sensor Device for Dry Run Protection in Applications with LORENTZ Solar
Surface Pump Systems
The device can be used to detect the water level in the suction side of the pipeline. When the two
electrodes run dry, the LORENTZ Controller will stop the pump and indicates Source Low LED.
ORDER INFORMATION
Item no.: 19-000001 product name: Water sensor, pipe inst.
Item no.: 19-000002 product name: SS adapter
Item no.: 19-000003 product name: Steel adapter
Pipeline adapter must be ordered separately
(available as steel or stainless steel version)
FEATURES
Reliable dry run protection
Trouble free operation
TECHNICAL DATA
Max. operating temperature 70 °C
Enclosure class: IP54
Cable length: 4 m
Wire size: 2x 1.0mm² or AWG 17,
waterproofed
Mounted in vertical position
Meets the requirements for CE
DIMENSION/WEIGHT
Packaging dimensions: 180 x 180 x 80 mm
7.1 x 7.1 x 3.1in
Total weight: 3.5kg / 7.7lbs
pipeline adapter
Puranova Techavenue DWC-LLC
P.O. Box 390667- Dubai World Central - Dubai - United Arab Emirates - +971 4 553 4107All specifi cations and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may diff er from actual products depending on local market re-quirements and regulations. A pump system consists of a controller, motor and pump end. Multiple pumps/pump ends are shown to represent the wide range of pumps (over 104) that PuraNova Tech has.
To find out more visit www.puranovatech.com
99
Well Probe Mechanically Activated Device for Dry Run Protection in Applications
with LORENTZ Solar Pump Systems
The switch can be used to detect the water level within a well. When the water level in the well
dropped below the level of the well probe, the LORENTZ Controller will stop the pump and indicates
Source Low LED.
ORDER INFORMATION
Item no.: 19-000000 product name: Well probe sensor
FEATURES
Reliable dry run protection
Simple to install
Trouble free operation
Corrosion-free
Splicing kit included
TECHNICAL DATA
Max. operating temperature 55 °C
Enclosure class: IP68
Submersion depth: max 50 m
Cable length: 1.5m
Wire size: 2x 0.75mm² or AWG 19,
waterproofed
Mounted in vertical position
Meets the requirements for CE
DIMENSION/WEIGHT
Packaging dimensions: 260 x 170 x 40 mm
10.3 x 6.7 x 1.6 in
Total weight: 0.1 kg / 0.2 lbs
Puranova Techavenue DWC-LLC
P.O. Box 390667- Dubai World Central - Dubai - United Arab Emirates - +971 4 553 4107All specifi cations and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may diff er from actual products depending on local market re-quirements and regulations. A pump system consists of a controller, motor and pump end. Multiple pumps/pump ends are shown to represent the wide range of pumps (over 104) that PuraNova Tech has.
To find out more visit www.puranovatech.com
100
Solar Water Filtration & Treatment Systems
Bio-Sun Water Purification Systems BIO-SUN gives rural populations in developing countries access to pure, healthy water and also provides drinking water to isolated areas everywhere in the world. The power of the UV reactor has been calculated to be able to treat the equivalent of 500 litres/hour with 400 J/m², which represents the dose required to make water drinkable in all the developed countries. Due to its photovoltaic power supply, this terminal has been designed
to operate for approximately 4 hours/day. Therefore a run time of approximately 3 days supplies about a hundred persons with 25 litres of water each day. The vital requirements are defined by the WHO.
Article Dimensions [l x w x h] Weight Article No.
Bio-Sun 90 1400 x 600 x 396 mm 100 kg 380036
90 W/12 VDC module | 2000 l/day | 1 x 70 Ah (C100) battery
Bio-Sun 340 1400 x 600 x 396 mm 183 kg 380037
4 x 85 W/12 VDC modules | 2000 l/day | 2 x 70 Ah (C100) battery | with pump
101
The GP XS 720 delivers exceptional quality and output using a manual hand pump to provide 2,725 liters per day.
NOTE: System is not intended for the treatment of water that has an obvious
contamination source, such as raw sewage, wastewater, or salt water to fresh
microbiologically safe drinking water.
SYSTEM SPECIFICATIONS
Model Number:
Production Rate (lpd):
Number of Membranes:
Preilter:
Preilter Backlush:
Post Filter Carbon Block
Case Dimensions:
Weight dry / wet (lbs/kg):
GP XS 720
Up to 2,725 lpd
(1) Hollow fiber membrane cartridge
5 Micron / 7.5 lpm max flow
Max PSI - 25 psi
0.5 Micron / 7.5 lpm max flow 65.2cm
x 64.7cm x 61.6cm
71/32.2 85/38.5
OPERATING SPECIFICATIONS
Normal Feed Pressure 3-10 psi
Max Operating Pressure 100 psi
Max Water Temperature 120oF/ 48.7oC
pH Range 2-13
pH Range (optimum) 5-8
Turbidity <10.0 NTU
Iron, Manganese, Hydrogen Sulide 3 ppm
SYSTEM DESCRIPTION
The GP XS 720 utilizes a manual hand pump and is engineered to provide microbiologic safe drinking water from any type of fresh water source (stream, lake, pond, well and/or cistern). The GP XS 720 provides clean portable water in remote locations, disaster relief areas, and humanitarian assistance missions using a small compact portable unit.
The system can produce up to 2,725 liters per day (720 gallons) or 1.89 lpm (0.5 gpm per minute) with as little as 3 psi of water pressure. The unique design weighs only 32.2 kgs wet, and can be easily transported by two people. Great for environments where the water quality is unknown or in question. Third party independent lab testing has verified the system for bacteria reduction based on EPA Clean Drinking Water standards.
The portable GP XS 720 is the first of its kind - a complete portable 8 stage water treatment to provide safe clean drinking water. All water components are housed within a protective and durable high density polyethylene case.
FEATURES AND SPECIFICATIONS
Output: 2,725 LPD, 1.89 LPM (based on feed water at 72°F)
Hollow fiber ultrafiltration membrane removes 99.999% of bacteria, cysts and viruses
Prefilter: Backflushable Sediment Filter
Postfilter: .5 micron carbon
External product/drain quick connect fittings
External standard hose-fitting feed connection
1st pressure gauge monitors incoming feed water pressure
2nd pressure gauge is after the final filter to monitor pressure drop across the system
Membrane quick release vessel
12 feet ( 3.048 meters) of suction hose (supplied)
Easy to operate hand power water pump that has a 12.5 foot water draw capability (25
foot with solar option) with a delivery of 1gpm at 10 psi into system for maximum water
production
Manual product, feed, drain, tank flush valves
SS Steel dispensing spout
Unit is design to be easily disinfected at the end of each day and includes disinfection kit
OPTIONS
24 volt DC electric pump & motor mounting bracket / (4) 20 watt solar panels
Additional hollowfiber membrane to increase production to 5,488 lpd (pump req’d)
Universal faucet adapter
Filter Replacement Kits #01-#02-#03
GP XS 720 WATER SYSTEM
Case with upgraded
handle / wheels
Optional Case
102
GP XS 720WATER SYSTEM
APPLICATIONS
Disaster ReliefSupply large volumes of safe, potable drinking water during or ater a disaster. Have the best and easiest to maintain tool available when it comes to emergency water puriication or water treatment systems designed for disaster re-sponse. Currently deployed in Haiti and S. Sudan.
Remote IndustryOn-site water treatment using the GP XS 720 can save a 300 person remote camp over $100,000 per year when com-pared to bottled water. Reduce the complexity of your supply chain, meet health and safety regulations and reduce your environmental impact.
Military TheatreProvide potable drinking water on exercise or deployement. Bottled water is not always available, and if it is, the logis-tics of moving, handling and supplying the volumes required can be an overwhelming challenge.
Adventure Tours Provide clean safe drinking water to your clients, and provide emergency response capability.
Backcountry TripsSupply backcountry trips from most any creek, stream, pond, well, lake or fresh water source.
Missions and Relief AgenciesSupport missions, NGOs, and hummanitarian programs and agencies with clean potable water without the need for power.
MAINTENANCE The system is maintaned by an easy to understand manual backwashing feature, internal disinfection procedure, and simple ilter replacements. Maintenance is required when there is a reduced low of potable water. Water will stop lowing when potable water is not available. Each backwashing procedure can be accomplished in one minute. Disinfec-tion of system can be accomplished in ive minutes without the need of external power, equipment, or materials. User manual included.
SYSTEM PARTS(1) GP XS 720 Hand Powered Water Filtration Unit and Parts (1) Spare Parts Kit(1) Filter Replacement Kit #01(1) Chlorine tablet (.97 grams) botle (279 tablets) (1) User Manual
OPTIONAL FILTER REPLACEMENT KITS - LIST PRICEFilter life is dependent on turbidity and quantity of water produced on a daily basis. Turbidity chart is included in the manual. Our filter replacement program is designed to handle various water turbuidities and provide potable water for at least 180 days.
#01 - Low turbidity water #02 - Medium turbidity water #03 - High turbidity water
103
The GP XSS 1440 delivers exceptional quality and output using a manual hand pump to provide 5,450 liters per day.
NOTE: System is not intended for the treatment of water that
has an obvious contamination source, such as raw sewage,
wastewater, or salt water to fresh microbiologically safe
drinking water.
SYSTEM SPECIFICATIONS
Model Number: GP XSS 1440
Production Rate (lpd): Up to 5,450 lpd
Number of Membranes: (2) Hollow fiber membrane cartridge
Preilter: 5 Micron / 7.5 lpm max flow
Preilter Backlush: Max PSI - 25 psi
Post Filter Carbon Block 0.5 Micron / 7.5 lpm max flow
Case Dimensions: 65.2cm x 64.7cm x 61.6cm
Weight dry / wet (lbs/kg): 114/51.7 128/58
OPERATING SPECIFICATIONS
Normal Feed Pressure 3-10 psi
Max Operating Pressure 100 psi
Max Water Temperature 120oF/ 48.7oC
pH Range 2-13
pH Range (optimum) 5-8
Turbidity <10.0 NTU
Iron, Manganese, Hydrogen Sulide 3 ppm
SYSTEM DESCRIPTION
The GP XSS 1440 utilizes a SOLAR power system with a backup
manual hand pump and is engineered to provide microbiologic
safe drinking water from any type of fresh water source (stream,
lake, pond, well and/or cistern). The GP XSS 1440 provides clean
portable water in remote locations, disaster relief areas, and
humanitarian assistance missions using a small compact portable
unit.
The system can produce up to 5,450 liters per day (1440 gallons)
or 3.78 lpm (1.0 gpm per minute) with as little as 3 psi of water
pressure. The unique design weighs only 58 kgs wet, and can
be easily transported by two people. Great for environments
where the water quality is unknown or in question. Third party
independent lab testing has verified the system for bacteria
reduction based on EPA Clean Drinking Water standards.
The portable GP XSS 1440 is the first of its kind - a complete 8
stage water treatment system to provide safe clean drinking
water. All water components are housed within a protective and
durable high density polyethylene case.
FEATURES AND SPECIFICATIONS
Output: 5,450 LPD, 3.78 LPM (based on feed water at 72°F)
Hollow fiber ultrafiltration membrane removes 99.999% of bacteria, cysts and viruses
Prefilter: Backflushable Sediment Filter
Postfilter: .5 micron carbon
External product/drain quick connect fittings
External standard hose-fitting feed connection
1st pressure gauge monitors incoming feed water pressure
2nd pressure gauge is after the final filter to monitor pressure drop across the system
Membrane quick release vessel
12 feet ( 3.048 meters) of suction hose (supplied)
Easy to operate hand power water pump that has a 12.5 foot water draw capability (25
foot with solar option) with a delivery of 1gpm at 10 psi into system for maximum water
production
Manual product, feed, drain, tank flush valves
SS Steel dispensing spout
Unit is design to be easily disinfected at the end of each day and includes disinfection kit
24 volt DC electric pump & motor mounting bracket / (4) 20 watt solar panels
Additional hollowfiber membrane to increase production to 5,488 lpd (pump req’d)
OPTIONS
Filter Replacement Kits #01-#02-#03
Case upgrade with handles and wheels
GP XSS 1440 WATER SYSTEM
Case with upgraded
handle / wheels
Optional Case
GP XSS 1440 WATER SYSTEM
APPLICATIONS
Disaster Relief
Supply large volumes of safe, potable drinking water during or after a disaster. Have the best and easiest to maintain
tool available when it comes to emergency water puriication or water treatment systems designed for disaster re-
sponse. Currently deployed in Haiti and S. Sudan.
Remote Industry
On-site water treatment using the GP XSS 1440 can save a 300 person remote camp over $100,000 per year when
compared to bottled water. Reduce the complexity of your supply chain, meet health and safety regulations and reduce
your environmental impact.
Military Theatre
Provide potable drinking water on exercise or deployement. Bottled water is not always available, and if it is, the logis-
tics of moving, handling and supplying the volumes required can be an overwhelming challenge.
Adventure Tours
Provide clean safe drinking water to your clients, and provide emergency response capability.
Backcountry TripsSupply backcountry trips from most any creek, stream, pond, well, lake or fresh water source.
Missions and Relief Agencies
Support missions, NGOs, and hummanitarian programs and agencies with clean potable water without the need for
power.
MAINTENANCE
The system is maintaned by an easy to understand manual backwashing feature, internal disinfection procedure, and
simple ilter replacements. Maintenance is required when there is a reduced low of potable water. Water will stop lowing when potable water is not available. Each backwashing procedure can be accomplished in one minute. Disinfec-
tion of system can be accomplished in ive minutes without the need of external power, equipment, or materials. User manual included.
SYSTEM PARTS
(1) GP XSS 1440Hand Powered Water Filtration Unit and Parts (1) 80 W foldable solar panel and wiring
(1) Spare Parts Kit
(1) Filter Replacement Kit #01
(1) Chlorine tablet (.97 grams) bottle (279 tablets)
(1) User Manual
OPTIONAL FILTER REPLACEMENT KITS - LIST PRICE
Filter life is dependent on turbidity and quantity of water produced on a daily basis. Turbidity chart is included in the
manual. Our filter replacement program is designed to handle various water turbuidities and provide potable water for
at least 180 days.
#01 - Low turbidity water
#02 - Medium turbidity water
#03 - High turbidity water 104
GP XP10000ULTRAFILTRATION MOBILE SYSTEM (UF)
PRODUCT SPECIFICATIONS | 2
SYSTEM DESCRIPTION
The GEN PRO XP10000 is designed to support large-scale disaster relief efforts and humanitarian assistance efforts. With a small 1.2 m x 1.8 m x 1.5 m footprint and a weight of 1,179 kgs, this system is deployed by air, surface, and trailer deliverable to site.
It has the capacity of producing 37,500 Liters / 10,000 U.S. gal in a solar day (5 to 6 hours) with a maximum up to 37,854 Liters / 10,000 U.S. gal of micro-biologic safe drinking water per 24 hour time frame.
The system design incorporates the best of ultra water filtration treatment and solar power technologies. When there is no power available or a loss of electrical grid power the GEN PRO XP10000 incorporates solar technology to charge the battery bank with a normal solar day time frame based on location, which in turn powers the water treatment systems up to 24 hours autonomy at full water production.
Once placed the system is simple to set up (usually within 15 minute for 2 people) and has minimal O & M costs. The unique de-sign allows for additional power input sources such as generator, wind turbine, and/or lo-cal power grid.
FEATURES
Heavy Duty Powder Coated steel frame and panels
All corrosion resistant construction
Quick connections both water and electrical
Enclosed water treatment system department
Enclosed battery and power control department
Submersible DC water pump ( 75 Ft. draw)
Pump controller
Pressure drop auto kill switch prevents running dry
Panel mounted flow meters
Panel mount pre & post pressure gauges
Chlorine injection system
Manual back washable bed depth filter to protect membrane
20” spun depth sediment filter
4” x 40 hollow fiber membrane
Programmable (timed) UF back flush controller
High flow 1 micron carbon block post filtration to reduce odor and taste
Retractable/Adjustable 4 solar racking panels
4 pre-wired solar panels total (maximum wattage 760)
OPERATION SPECIFICATIONS - FILTRATION
Maximum water draw 22.8 meters / 75 feet
Production Rate: Up to 37,500 lpd
Case Dimensions: 1.2 m L x 1.8 m W x 1.5 m H
Weight: 1,179 kgs
Max Pressure 100 psi
Max Temperature 40 deg C
Max chlorine (continuous) 2 ppm
pH Range 3-10
Max. Total Dissolved Solids 5000 ppm
OPERATION SPECIFICATIONS - POWER
Solar Panels Qty 4 = total watts - 760
Bateries Qty 8 - 12 volt
Space Required during operation 243 cm W x 365 cm L x 182 cm H
Shipping Dimensions 121 cm W x 182 cm L x 182 cm H
OPTIONAL UPGRADES
Trailer package - Removable tires & wheels
Deep Well Pump - 22.8+ draw (requires larger power)
Booster Pump
Water storage tank with loat
Atmospheric storage tank with loat valve
Pressurized storage tank with pressure switch shutof
Heavy metal reduction iltration
Note: This system is not intended for the treatment of water that has obvious contamination
source, such as raw sewage. This system is not intended to convert wastewater to
microbiologically safe drinking water. Nor is this system intended to treat salt water to fresh
drinking water.
105
GP SW-SERIESMODEL GP SW 500
GP SW- SERIES PRODUCTS
TThe rugged GP SW 500 system is designed to efficiently purify
seawater and deliver it to an atmospheric tank where the water can
be drawn from by a delivery pump for ship, dock, island, and shore
use under emergency conditions. The system will be activated on/
off by a float switch in the tank or switch mounted on the outside
of the case. The system produces 1,800 lpd (.34 gpm) of purified
drinking water using a combination of filters including: high-
capacity gradient depth prefilter, reverse osmosis membrane: high
rejection/low energy, thin film composite, spiral wound, single pass,
reverse osmosis membrane element, and granular activated carbon
postfilter.
The GP SW 500 utilizes electrical input from an external, AC /
Generator, or solar-powered DC power source (solar not included).
An external, submersible pump is used to draw water from a variety
of feed sources including oceans, seas, lakes, rivers, bore holes, ,
streams or holding tanks.
All system components are built into the rolling case. Feed, product
and discharge ports are positioned along the top edge of the case
along with pressure gauges and system valves.
This system is light enough to be moved and deployed by one
person. At 49kgs, the system may also be checked as baggage on
most commercial airlines.
The GP SW 500 delivers one of
the most compact stand-alone
desal systems available. The
system is capable of servicing up
to 200 people a day with clean
drinking water
GP SW-SERIESMODEL GP SW 500
GP SW-SERIES MODEL GP SW 500 DESAL SYSTEM
SW - SER
IES P
RO
DU
CTS
THE GP ADVANTAGE.
Our systems can utilize electrical input from an external, solar-powered DC power source
External, submersible pump is used to draw water from a variety of feed sources including wells or bore holes, lakes, streams or holding tanks
GP SW 500’s are light enough to be moved and deployed by one or two persons. These systems may also be checked as baggage on most commercial airlines.
RO membrane technology
Proprietary system design
Simple operation and maintenance
X - SER
IES P
RO
DU
CTS
FEATURES
(2) 20” High Pressure RO membranes
High Pressure Clark Boost Pump
500 Gal/Day Product Water
316 SS Submersible Lorentz Pump with Pump Controller
Plastic Transport Case - Watertight, Crushproof, Dustproof with Automatic Pressure
Equalization Valve
Glycerin filled gauge for feed inlet pressure
Waterproof Power Connectors
Feed connection 3/4” Male Hose Connector
Product 1/4“ Tube
Brine 3/8” Tube
Dimensions 32”W x 22”D x 14”H
Weight 49 kgs/110 lbs
PRE TREATMENT OPTIONS
(2) 10”Dia. BB Washable 50 mic Pleated Filters
Plastic Transport Case - Watertight, Crushproof, Dustproof
Feed connection 3/4” Male Hose Connector
SYSTEM SPECIFICATIONS
Model Number: DESAL-1,800
Production Rate (lpd): Up to 1,800 lpd
Number of Membranes: (2) High Pressure membrane cartridge
Preilter: 25.4 cm Gradient depth
Electrical Supply: 30.5 cm Granular activated carbon
Pump: Lorentz Submersible
Case Dimensions: 81cm x 55cm x 35.5cm
Weight (lbs/kg): 110/49
OPERATION SPECIFICATIONS
Normal Feed Pressure 4 gpm, 25 psi
Max Operating Pressure 80 psi
Max Water Temperature 100oF/ 37.7oC
pH Range 3-10
pH Range (optimum) 5-8
Turbidity <10.0 NTU
Iron, Manganese, Hydrogen Sulide 0 ppm
106
GP SW-SERIESMODEL GP SW 1500
SW - SER
IES P
RO
DU
CTS
GP SW-SERIES MODEL GP SW 1500 DESAL SYSTEM
GP SW-SERIESMODEL SW 4500
SEA WATER SYSTEMS
WATER PURIFICATION SYSTEM DESCRIPTION
The GP SW DESAL 1500 system is designed to efficiently purify
seawater and deliver it to an atmospheric tank where the water
can be drawn from by a delivery pump. The system is powered
completely by solar power, with options to use generator or AC
power. The system will be activated on/off by a float switch in the
tank.
It is capable of filtering up to 1,500 gallons of sea water per day (238
lph). Programmable, automated, on-board system control provides
feed tank low, pre-treat cycle, low feed pressure, product tank level,
and flush cycle capabilities. Imagine having real-time reporting of
all of your systems throughout the globe at the click of a mouse.
Automatic reporting of system performance and cycling of flow
ensures longevity of membranes.
WATER PURIFICATION SYSTEM REQUIREMENTS
4 GPM Feed water with 25psi pressure min
240V, 3 Ph, 60 Hz or 120V, 1 Ph, 60 Hz WATER
PURIFICATION FEATURES (2) 4040
“High Pressure/Low Energy” membrane(2) FRP 1000 PSI Vessels.
316 SS high pressure pump with 3 HP motor
Flow meters for brine and product flows
Low pressure protection switch
TDS meter within microprocessor
SS case SS internals and Glycerin filled Gauges for feed filter in/out and vessel array
in/out.
Stainless steel brine and re-circulation control valves
20 inch, 10 micron carbon post filter
Frame is 304 Stainless Steel with mounting holes
Microprocessor system controller (feed tank low, pre-treat cycle, low feed pressure,
product tank level, flush cycle)
Feed connection ¾” FNPT Female National Pipe Thread
Brine and Product ½” Tube Quick Connect
Dimensions 55cm W x 66cm D x 124cm H
WATER PURIFICATION SYSTEM SPECIFICATIONS
Model Number: GP SW 1500
Production Rate (lpd): Up to 5,500 lpd
Number of Membranes: (2) High Pressure membrane cartridge
Preilter: 50 cm x 6.35 cm x 50 cm Cartridge
Electrical Supply: 30.5 cm Granular activated carbon
Pump: 316 SS High Pressure
Case Dimensions: 55cm W x 66cm D x 124cm H
Weight (lbs/kg): 178/81
WATER PURIFICATION OPERATION SPECIFICATIONS
Dissolved Solid Rejection: 98-99%
Temperature Range Max 113oF / 45oC, Min. 33oF / .5oC
Chlorine tolerance <0.1 PPM
pH Range 3-11
Pressure Min 25 psi/1.8 Bar, Max 80 psi/5.6 Bar
Automatic Membrane Flush
PRE-TREATMENT EQUIPMENT
(1) 10”Dia. x 44” polyglass tank with Fleck 2510 auto backwashing valve
120V, 3Ph, 60Hz for Fleck 2510 and Injection Pump
Antiscalent injection system is .6-6GPD pump mounted on 15 Gal. tank
Antiscalent start up pale
The SW 1500 delivers exceptional quality and output. The system is capable of purifying water virtualy anywhere in the world.
WATER PURIFICATION SYSTEM DESCRIPTION
The GP SW 4500 system is designed to efficiently purify seawater
and deliver it to an atmospheric tank where the water can be drawn
from by a delivery pump. The system is powered completely by
solar power, with options to use generator or AC power. The system
will be activated on/off by a float switch in the tank.
It is capable of filtering up to 4,500 gallons of sea water per day (709
lph). Programmable, automated, on-board system control provides
feed tank low, pre-treat cycle, low feed pressure, product tank level,
and flush cycle capabilities. Imagine having real-time reporting of
all of your systems throughout the globe at the click of a mouse.
Automatic reporting of system performance and cycling of flow
ensures longevity of membranes.
WATER PURIFICATION SYSTEM REQUIREMENTS
12 GPM Feed water with 25psi pressure min
240V, 3 Ph, 60 Hz or 120V, 1 Ph, 60 Hz WATER
PURIFICATION FEATURES (5) 4040 “High Pressure/
Low Energy” membrane
(5) FRP 1000 PSI Vessels.
316 SS high pressure pump with 3 HP motor
Flow meters for brine and product flows
Low pressure protection switch
TDS meter within microprocessor
TDS meter within microprocessor
SS case SS internals and Glycerin filled Gauges for feed filter in/out and vessel array
in/out.
Stainless steel brine and re-circulation control valves
20 inch, 10 micron carbon post filter
Frame is 304 Stainless Steel with mounting holes
Microprocessor system controller (feed tank low, pre-treat cycle, low feed pressure,
product tank level, flush cycle)
Feed connection ¾” FNPT Female National Pipe Thread
Brine and Product ½” Tube
Dimensions 57cm W x 83cm D x 124cm H
WATER PURIFICATION SYSTEM SPECIFICATIONS
Model Number: GP SW 4500S
Production Rate (lpd): Up to 11,300 lpd
Number of Membranes: (5) High Pressure membrane cartridge
Preilter: 50 cm x 6.35 cm x 50 cm Cartridge
Pump: 316 SS High Pressure
Weight (lbs/kg): 395/179
WATER PURIFICATION OPERATION SPECIFICATIONS
Dissolved Solid Rejection: 98-99%
Temperature Range Max 113oF / 45oC, Min. 33oF / .5oC
Chlorine tolerance <0.1 PPM
pH Range 3-11
Pressure Min 25 psi/1.8 Bar, Max 80 psi/5.6 Bar
Automatic Membrane Flush
PRE-TREATMENT EQUIPMENT
(1) 12”Dia. x 44” polyglass tank with Fleck 2510 auto backwashing valve
120V, 3Ph, 60Hz for Fleck 2510 and Injection Pump
Antiscalent injection system is .6-6GPD pump mounted on 15 Gal. tank
Antiscalent start up pale
Tank (71cm W x 41cm D x 76cm) mounts pump to tank.
2.5 cuft of Nextsand media
GP SW-SERIES MODEL GP SW 4500 DESAL SYSTEM
107
Health & Rural Electrification Kits
Rural Electrification Kit En Light Rural Electrification Kit En Light is an easy-to-
install turnkey solution for bright illumination of large rooms. offers a complete kit for solar lighting including two light tubes, all
equipment for charging, accessories and installation manual. The kits give light for 6 hours a day. System voltage is 24 VDC. Ideal for the use in schools, public administrations, health posts etc.
Components: 2 Solar modules 2 LED tubes 2 batteries Charge controller Cabling Mounting structure
offer easy-to-install turnkey solutions for either lighting, ventilation, cooling and/or freezing. The kits are available in different configurations according to the different irradiation groups. The kits have a system voltage of 24 VDC.
If you are interested in kits with a system voltage of 12 VDC, please do not hesitate to contact our sales team. Have a look on the irradiation maps on the back cover to find the perfectly fitting kit for your specific location.
Article Irradiation Group
Article No.
En Light IG 1 + 2 ≈ 5 – 6 kWh/m² 1 + 2 600042
2 LED tubes (11 W/1100 lm) | 2 modules (20 W) | 2 batteries (38 Ah)
En Light IG 3 ≈ 4 kWh/m² 3 600043
2 LED tubes (11 W/1100 lm) | 2 modules (30 W) | 2 batteries (38 Ah)
En Light IG 4 ≈ 3 kWh/m² 4 600044
2 LED tubes (11 W/1100 lm) | 2 modules (35 W) | 2 batteries (38 Ah)
109
Rural Electri�cation Kit Chill Air provide a customized solution for indoor ventilation: The Chill Air Kit guarantees a cool air�ow for big rooms, including one fan, all equipment for charging, accessories and installation manual. The ceiling fans can be used up to 12 hours a day. System voltage is 24 VDC.
:stnenopmoC
2 solar modules 1 ceiling fan 2 batteries Charge controller Cabling Mounting structure
Article Irradiation Group
Article No.
Chill Air IG 1 + 2 + 3 ≈ 4 – 6 kWh/m² 1 – 3 6000531 fan (19 W/24 VDC) | 2 modules (50 W) | 2 batteries (50 Ah)
Chill Air IG 4 ≈ 3 kWh/m² 4 6000561 fan (19 W/24 VDC) | 2 modules (80 W) | 2 batteries (50 Ah)
110
Rural Electrification Kit Be Cool and Ice Age Kits are the best solution for reliable cooling and freezing needs far from the electricity grid. These kits include the solar fridge Steca PF 166, that can be used for cooling or freezing, all equipment for charging, installation and installation manual. The Refrigeration Kits are best suitable for the use in health posts, grocery stores etc.
Components: Solar modules Solar Fridge/Freezer Steca PF 166 Batteries Charge controller Cabling
Mounting structure
NOTE: Sizing is done for cooling a small capacity of goods per day like pharmaceuticals / vaccines
Article Article No.
Be Cool IG 1 – 4 600045
1 Steca PF166 | 1 modules 80 W | battery 65 Ah | 12 VDC
Ice Age IG 1 – 4 600049
1 Steca PF166 | 2 modules 100 W | 2 batteries 80 Ah | 24 VDC
Radiation Autonomy Ambient
Temperature
600045
Fridge @ 5 °C
600049
Freeze @ –10 °C
IG1 6,00 kWh/m²/d 43 h 35 °C 1,9 kg 1,9 kg
IG2 5,00 kWh/m²/d 52 h 32 °C 1,7 kg 1,5 kg
IG3 4,00 kWh/m²/d 63 h 29 °C 1,5 kg 1,1 kg
IG4 3,00 kWh/m²/d 84 h 26 °C 1 kg 0,6 kg
KIT WITH STECA FRIDGE
PF240 ON REQUEST!
111
Rural Electrification Kit Health Care provide a complete kit for solar cooling, venti la tion and lighting: It includes the solar fridge Steca PF 166, two fans and two light tubes, all equipment for charging and installation manual. Ideal for the use in health posts and hospitals that are located far from the grid.
Components: Solar modules Ceiling fans Solar Fridge Steca PF 166 LED tubes Batteries Charge controller
Cabling Mounting structure
Article Article No.
Health Care IG 1 – 4 600057
1 Steca PF166 | 2 fan 19 W | 2 LED tubes 11W | 3 modules 150 W | 2 batteries 200 Ah | 24 VDC
If you are interested in kits with a system voltage of 12 VDC, please do not hesitate to contact our sales team.
Radiation Autonomy Ambient
Temperature
Fridge @ 3 °C Operating
time Fan
Operating
time LED
IG1 6,00 kWh/m²/d 51 h 35 °C 9 kg 20 h 6 h
IG2 5,00 kWh/m²/d 61 h 32 °C 7 kg 18 h 6 h
IG3 4,00 kWh/m²/d 75 h 29 °C 5 kg 15 h 6 h
IG4 3,00 kWh/m²/d 100 h 26 °C 3 kg 12 h 6 h
112
NEW TCW SDD Cooling Kits This solution provides a reliable cold chain for vitally important vaccines or other goods even in the most remoted areas. The kit includes the refrigerator/freezer box and the corresponding solar modules. However, contrary to most of the existing systems, no more batteries for back-up are needed as the compressor is directly driven from the solar modules!
Article Dimensions [l x w x h] Weight Article No.
TCW SDD – with Solar Direct Drive | Battery free
Refrigerator / Freezer TCW2000 SDD 1270 x 790 x 910 mm 149 kg 360150
Vaccine 99 l & ice 9,6 l | solar 12 – 20 VDC | 0,78 kWh/d | 8 x 80 Wp | fixed roof structure
Refrigerator / Freezer TCW3000 SDD 1280 x 780 x 900 mm 143 kg 360151
Vaccine 156 l | solar 13,5 – 24 VDC | 0,34 kWh/d | 4 x 80 Wp | fixed roof structure
W H O S t a n d a r d !
TCW 2000 SDD
TCW 3000 SDD
113
65
5 m
m
1045 mm
405 m
m
270 mm
255 m
m
67
0 m
m
670 mm
445 m
m
270 mm
27
0 m
mInternal dimensions PF 240
40 W...100 W
PF 166
PF 240
Internal dimensions PF 166
PF 166 and PF 240Solar refrigerator/freezerPF refrigerators are the most efficient DC energy-saving refri-gerators ever developed. They can be used as either a refrigerator or a freezer.PF 166 and PF 240 are fully programmable. The in-side temperature and each of the other configuration values can be set by the user. They are therefore perfectly suited for all DC applica-tions including even the refrigeration of medicines in hospitals. The optimal electronic control and speed regulation of the compressor guarantees extremely efficient use of energy. This leads to significant cost reductions.
This product stands out for its user-friendliness, thanks to a large digital display with setting options, the highest standards of quality and reliability and a long service life. The refrigerator or freezer is easy to clean as it has a sealing plug on the bottom for draining water.
Product features ∙ Fast cooling due to compressor speed control∙ The freezers can be operated via an off-grid battery system
with a 70 Wp photovoltaic module in most climates∙ Automatic detection of voltage∙ Temperature fully programmable∙ Adjustable refrigerator or freezer function∙ Suitable for all DC applications∙ Low maintenance and easy to clean∙ Lock with two keys∙ Also suitable for mobile use∙ Auto-dimming for reduction of own consumption
Electronic protection functions ∙ Reverse polarity protection∙ Deep discharge protection∙ Power breakdown display∙ Temperature alarm
Displays∙ Multifunction LED display∙ Digital temperature display
Operation∙ Programming by buttons
Certificates∙ Compliant with European Standards (CE)∙ RoHS compliant∙ Abstinence of ozone destroying materials according
EC 1005/2009 (CFC-free)∙ Made in Austria∙ Developed in Germany∙ Manufactured according to ISO 9001 and ISO 14001
PF 166 PF 240
Characterisation of the operating performance
System voltage 12 V (24 V)
Nominal power 40 W … 100 W
Cooling volume 166 litres 240 litres
Refrigerator temperature +2 °C … +12 °C
Freezer temperature -20 °C … -10 °C
DC input side
Input voltage 10 V … 17 V (17 V … 31.5 V)12 V / 24 V battery
DC output side
Reconnection voltage (LVR) 11.7 V (24.2 V)
Deep discharge protection (LVD)
10.4 V (22.8 V)
Operating conditions
Ambient temperature +10 °C … +43 °C
Fitting and construction
Dimensions (X x Y x Z) 872 x 917 x 709 mm 1,288 x 919 x 760 mm
Insulation strength 11 cm 12 cm
Weight 47 kg 62 kg
Cooling principle compressor
Refrigerant 190 g R134a
Celsius / Fahrenheit tempe-rature display
adjustable
Display brightness adjustable
Hanging baskets 2
Freezer trays 3
Cold battery 1
Automatic energy-saving mode
yes
Technical data at 25 °C / 77 °F
Consumption Steca PF 166 [Wh / day]
Ambient temperature 20 °C 25 °C 30 °C 35 °C 40 °C
Interior temperature +8 °C 44 72 109 156 216
Interior temperature +3 °C 72 109 156 216 291
Interior temperature -10 °C 190 259 346 454 589
Interior temperature -20 °C 346 454 589 756 946
Consumption Steca PF 240 [Wh / day]
Ambient temperature 20 °C 25 °C 30 °C 35 °C 40 °C
Interior temperature +8 °C 49 82 125 183 256
Interior temperature +3 °C 82 125 183 256 351
Interior temperature -10 °C 225 311 421 561 739
Interior temperature -20 °C 421 561 739 964 1,246
114
A
C
EB
»KEEPS IT ALL FRESH«
Key:
A Solar modulesB Solar charge controllerC BatteryE Electrical load
Minimum case PF 166
refrige-rator
PF 166freezer
PF 240refrige-rator
PF 240 freezer
Irradiation7kWh /m² / d
5 kWh /m² / d
5 kWh /m² / d
5 kWh /m² / d
5 kWh /m² / d
Ambient temperature
20 °C 35 °C 35 °C 35 °C 35 °C
Inside temperature
8 °C 5 °C -15 °C 5 °C -15 °C
PV power required
45 Wp 175 Wp 510 Wp 185 Wp 550 Wp
Battery power required
12 V, 50 Ah
24 V, 120 Ah
24 V,350 Ah
24 V, 125 Ah
24 V, 375 Ah
Duration of battery independence
2 days 3 days 3 days 3 days 3 days
Example applications
The application areas of the PF 166 and PF 240 solar refrigerators and freezers are multifarious: solar refrigerators and freezers cater for the most demanding requirements at all times, whether for cooling drinks in solar home systems, for storing medication in hospitals supplied by stand-alone systems or for sto-rage of frozen food. The most important parameters for the plan-ning of such applications are summarized at a glance in the table opposite.
Hospital , Afghanistan
Cooled drinks, Caribbean
Hospital, Nigeria
115
PuraNova TechP.O. Box 390667Dubai World CentralDubaiU.A.E.
459
www.puranovatech.com
www.facebook.com/puranovatech
linkedin.com/company/puranova-tech
+971 (0)50 6239
727+961 (0)3 646
553+971 (0)4 4107