Papers published

24
Total papers published: 175 Research papers published in various National & International Journals: 75 National Journals : 15 1. Ravinder Reddy P., Ramamurthy.G., ‘Stress intensity factor using Finite Element Analysis in rectangular Orthotropic composite annular disc’, Defense Science Journal, V47, n1, (1997), pp. 55-63. Impact factor 0.304 2. P Ravinder Reddy., A A Sriramakrishna, Numerical analysis of Orthogonal cutting of Aluminium-based composites, Defence Science Journal,Vol.52, No.4, Oct.2002, pp.375-383. Impact factor 0.304 3. P Ravinder Reddy, ‘Fracture Analysis of Ceramic Matrix Composites Using FEM’, Journal of Aerospace Quality and Reliability, Vol.1 ,No.1, Jan.2005,pp.69-80. 4. D.S Setty , P Ravinder Reddy , C. Ganguly “Online Quality Monitoring of Welding and Weld upset Parameters in Resistance Projection Welding Process, Journal of Non-Destructive Testing & Evaluation,v6,pp.29-35,2007.Impact factor 0.771 5. D.S Setty, Dr Ravinder Reddy,P, Dr Ganguli,C., “Characterization of Resistance Projection Welding Process by Electrical Parameters Monitoring”, IWS Journal,Dec.2008, n4,V3,pp.31-36., pp.34-42,Impact factor:0.205 6. Dr P. Ravinder Reddy, P.Ramalakshmi, Padmaja, D.S.S.Kameswari,J. Arundeep, “Investigation of SIF and J- Integrals in Composite Plates with Cracks”, National Journal of Technology, V4, No.4, 2008 7. N.V.Srinivasulu, Dr P.Ravinder Reddy, Dr CK Rao, Finite Element Analysis of Thin Walled Tapered Cantilever Composite I-Beam, J. Curr. Sci. 14(1),pp. .297-302,(2009)

Transcript of Papers published

Total papers published: 175

Research papers published in various National & InternationalJournals: 75

National Journals : 15

1. Ravinder Reddy P., Ramamurthy.G., ‘Stress intensity factor using Finite Element Analysis in rectangular Orthotropic composite annular disc’, Defense Science Journal, V47, n1, (1997), pp. 55-63. Impact factor 0.304

2. P Ravinder Reddy., A A Sriramakrishna, Numerical analysis of Orthogonal cutting of Aluminium-based composites, Defence Science Journal,Vol.52, No.4, Oct.2002, pp.375-383. Impact factor 0.304

3. P Ravinder Reddy, ‘Fracture Analysis of Ceramic Matrix Composites Using FEM’, Journal of Aerospace Quality and Reliability, Vol.1 ,No.1, Jan.2005,pp.69-80.

4. D.S Setty , P Ravinder Reddy , C. Ganguly “Online Quality Monitoring of Welding and Weld upset Parameters in Resistance Projection Welding Process, Journal of Non-Destructive Testing& Evaluation,v6,pp.29-35,2007.Impact factor 0.771

5. D.S Setty, Dr Ravinder Reddy,P, Dr Ganguli,C., “Characterization of Resistance Projection Welding Process by Electrical Parameters Monitoring”, IWS Journal,Dec.2008, n4,V3,pp.31-36., pp.34-42,Impact factor:0.205

6. Dr P. Ravinder Reddy, P.Ramalakshmi, Padmaja, D.S.S.Kameswari,J. Arundeep, “Investigation of SIF and J-Integrals in Composite Plates with Cracks”, National Journal of Technology, V4, No.4, 2008

7. N.V.Srinivasulu, Dr P.Ravinder Reddy, Dr CK Rao, Finite Element Analysis of Thin Walled Tapered Cantilever Composite I-Beam, J. Curr. Sci. 14(1),pp. .297-302,(2009)

8. P Ravinder Reddy, P. Rama Laksmi, Investigation of Deflections in Anti-Symmetric and Cross Ply Laminate using Finite Element Analysis, J. Curr. Sci. 14(1),pp. 373-384,(2009)

9. R.Uday Kumar, Dr P. Ravinder Reddy, Dr A.V sita Rama Raju, Analysis of radial stresses in Fluid assisted deep drawing Process, J. Curr. Sci. 14(1),pp. 341-354,(2009)

10. Ratnakar Pondu , K.L Yadav, Amit Kumar, P. Ravinder Reddy, &AVSSKS Gupta, Effect of sintering temperature on structural and electrical properties of BiFeO3 Multiferroics,Indian Journal of Engineering &Materials Sciences, v17,n3,Dec. 2010, pp.481-485. Impact factor:0.223

11. Dr P Ravinder Reddy, P. Anjani Devi, Pedestrian Head Impact Analysis using LS-Dyna, J. Curr. Science, V.15,No.1,pp.277-288,2010

12. Ishtiaq Ahmed Khan, Dr. P. Ravinder reddy, Dr ACS Kumar, Yatin Tambe, Experimental Investigations on Friction Welding of AL 6061 and SS 304., Indian Welding Journal, pp. 25-31, April 2010.Impact factor:0.122

13. Ratnakar Pondu,G.D Verma, K.L Yadav, P. Ravinder Reddy, & AVSSKS Gupta, Synthesis and Characterisation of Carbon Nanotubes, Technology Spectrum, v3,n3,2010,pp.26-34. ISSN:0974-6854

14. Isthiaq Ahmed Khan, Dr P.Ravinder Reddy, Dr ACS Kumar, and Narender, Finite Element Analysis of Friction Welding Process for Al 6061 and SS 304, Manufacturing Technology Today, March 2010,N3,V9,pp.20-24,ISSN:0972-7396

15. AA Sriramkrishna, Dr P.Ravinder Reddy, ‘Experimental study of surface Intrigrity during Turning of Al/SiCp Composites” Journal of Manufacturing Technology Today(MTT), V9,No.11-12,pp.19-25,ISSN: 0972-7396,Dec.2010

International Journals : 60

1. S Khadar Vali, Dr P Ravinder Reddy, Dr P Ram Reddy, Impact Testing of Advanced Ceramic Composites Using Experimental & Numerical Analysis, International Journal of Technology Spectrum, Research Communication, Vol.2, No.1, pp. 22-25,(2008)

2. D.S.Setty, Dr P Ravinder Reddy, A.L.N Murthy, “Resistance Butt Welding of Zirconium Alloy Material”, Materials and Manufacturing Processes, V23,pp.844-851,2008, Taylors and Francis, Impact factor:1.06.

3. R. Uday Kumar , P Ravinder Reddy,A.V Sita Ramaraju , “Influence of Process Parameters and Viscosity on Radial Stresses in Fluid Assisted Deep Drawing Process”, Int. J of Applied Engineering research (IJAER), ISSN 09-4562, v4, n1,2009,pp.1857-1870.

4. P. Ashok kumar, P. Ravinder Reddy , N. Sharath Chandra , Dr.A V S S K S. Gupta, “Investigation Of Stress Intensity Factor For A Plate With Hole Using FEA”, International Journal of Theoretical and Applied Mechanics, ISSN 0973-6085,V4 ,n 2, (2009) , pp. 223–233

5. Ratnakar Pondu, P.Ravinder Reddy, AVSSKS Gupta, G. K. M. Rao, Simulation Studies on Dynamic Response of Single-WalledCarbon Nanotubes under Bending-buckling Loads - an FEA Approach, International Journal of Nanotechnology and Applications (IJNA), ISSN 0973-631X, V3,n2,2009,pp.49-60.

6. P Ravinder Reddy., A A Sriramakrishna, Tool Wear in Cuttingof Metal Matrix Composites, International Journal of AppliedEngineering Research, ISSN 0973-4562, V4, n11 (2009) ,pp. 2125–2140

7. P Ravinder Reddy, Ishtiaq Ahmed Khan, Yatin Tambe and ACS Kumar, The Influence of Joint Geometry on the Interface

Properties of Friction Welded Dissimilar Materials, International Journal of Materials Science, ISSN 0973-4589,Volume 4, Number 4 (2009), pp. 459–468.

8. R.Uday Kumar, P. Ravinder Reddy, A.V Sita Rama Raju, Evaluation of Drawing Stresses in Fluid Assisted Deep Drawing Process, International journal of Theoretical and Applied Mechanics, ISSN 0973-6085,v4,n3,pp. 321-334,(2009)

9. Uday Kumar R, Ravinder Reddy P, & SitaRamaraju A.V, Comparative Studies on Drawing Stresses of Magnesium Alloys Through Fluid Assisted Deep Drawing Process, Int. Nat. Journal of Manufacturing Science and Technology,V3,n2,Dec.2009,pp.207-218.

10. G M Sayeed Ahmed, Dr P.Ravinder Reddy, N.Seetharamaiah,Modeling and Analysis of End mill Cutter to Reduce the Chatter during Machining, International journal of Industrial Engineering and Technology,ISSN 0974-3146,IJIET,v2, n1, pp. 143-154, 2010.

11. Amit Kumar, K.L.Yadav, Hemant Singh, Ratnakar Pondu, Dr P.Ravinder Reddy, Structural, Magnetic and Dielectric Properties of xCrFe2O4-(1-x) BiFeO3 Multiferroic Nanocomposites, Physica B, 405,(2010),pp.2362-2366.doi:10.1016/j.physb.2010.02.038. Feb.2010, Elsevier Publications, Impact factor:1.063

12. Afroz Mehar, P. Ravinder Reddy, G.K. Mohan Rao, Ratnakar Pandu, Theoretical Modeling and Analysis of Orthotropic Cylindrical Shells of Different Composites Subjected to Different Loading Conditions, International Journal of Materials Science, ISSN 0973-4589 Volume 5, Number 1 (2010), pp. 91–104

13. P. Ravinder Reddy and J. Pradeep Kumar,Vibration Response of Composite Plate with Delamination using FEA,

International Journal of Applied Engineering Research, ISSN 0973-4562, V5, n22 , pp. 3633–3643, 2010, Research India Publications

14. Dr P. Ravinder Reddy, Hemendra Kr. Srivastava , SS Hebbal, Design and Analysis of Injection Molding of Mineral Water Bottle Cap, International Journal of Applied Engineering Research, ISSN 0973-4562, Volume 6, Number 8 (2011), pp. 1031-1040, © Research India Publications

15. Dr P. Ravinder Reddy, G. Prabhu Prasad, P. Shashikanth Reddy, Optimum design of a cabin mounting bracket of load king pride using FEA, Technology Today Quarterly Journal, Journal of Technological world,V3, issue 1, pp.279-286,ISSN:2180-0987,Jan.2011.Impact factor:0.22

16. G M Sayeed Ahmed, Dr P.Ravinder Reddy, N.Seetharamaiah,Abdul Qudeer, Chatter detection and Control by using BinghamFluid in end Milling Process, International journal on Mechanical and Automobile Engineering,ISSN 0974-231X,IJME,March2011-May2011., issue no.01, V13, pp.29-36.Impact factor:0.58

17. R. Uday Kumar, P.Ravinder Reddy ,Dr A.V Sita Ramaraju,“Effect of Viscosity on Radial Stress, Drawing Stress and Drawing Force in Fluid Assisted Deep Drawing Process”, Int. J. of Computer Aided Engineering and Technology (IJCAET), Vol 3., Nos. 5/6, 2011,pp.583-599

18. Dr P Ravinder Reddy, D.S Setty, “Experimental Investigation of Resistance Butt Welding of Zircaloy Material”, Int. Nat. Journal of Quality Engineering, V3,n4, pp.121-128.Impact factor:0.7

19. G. Laxmaiah, P. Ravinder Reddy, M NSV Kiran Kumar, Optimization of Parameters Effecting The Noise in Hermitically Sealed Reciprocating Compressor using Tagichi Technique, International Journal of Multidispl. Research &

Advcs. In Engg. (IJMRAE)V.3,n. IV, pp.383-394. ISSN:0975-7074,Oct.2011

20. G. Laxmaiah, P. Ravinder Reddy, M. N. S. V. Kiran Kumar, Effect of Configuration on Noise in Hermitically sealed Reciprocating Compressor, International J. of Engineering Research & Technology, ISSN 0974-3154, Vol. 4, No. 1 (2011), pp. 161-166

21. Khadar Vali. S , Dr P. Ravinder Reddy , Dr P. Ram Reddy, Modeling and Analysis of Three Dimensional Carbon Fiber/SiC Composites prepared by Liquid Silicon InfiltrationUsing FEA, Global Journal of Engineering and Applied Sciences - ISSN 2249-2631(online): 2249-2623, Vol.1, n3, GJEAS.pp.133-139, 2011

22. Khadar Vali. S , Dr P. Ravinder Reddy , Dr P. Ram Reddy, Microstructure And Mechanical Properties of Three Dimensional Carbon Fiber/Sic Composites Prepared by Liquid Silicon Infiltration, Global Journal of Mechanical Engineering and Computational Science– ISSN 2249-3468, Vol.1(3), GJMECS,pp.91-98,2011

23. G.Mallaiah, A.Kumar and P. Ravinder Reddy, Influence OfAluminum And Titanium Addition On Mechanical Properties Of AISI 430 Ferritic Stainless Steel GTA Welds, International Journal of Advances in Engineering & Technology (IJAET) ,Nov 2011, ISSN: 2231-1963.

24. Dr. P. Ravinder Reddy,S. Soloman Raj., Performance evaluation of composite marine propeller using L8 orthogonalarray, International Journal of Engineering Science and Technology(IJEST), Vol.3 No.11 November 2011, pp.7987-7993, ISSN :0975-5462

25. Dr. P. Ravinder Reddy, G. Laxmaiah, M. N. S. V. Kiran Kumar, Effect of Configuration on Noise in Hermetically

Sealed Reciprocating Compressor, International Journal of Engineering Research and Technology., ISSN 0974-3154 Volume 4, Number 1 (2011), pp. 161-166, © International Research Publication House

26. Dr. P. Ravinder Reddy,S. Soloman Raj, Effect of stacking sequence on the performance of a marine propeller, International Journal of Applied Engineering Research, ISSN 0973-4562 Volume 6, Number 20 (2011) pp. 2367-2374.

27. G. Mallaiah, A. Kumar, Dr P. Ravinder Reddy, Dr G M Reddy, Influence of Grain Refining Elements on Mechanical Properties of AISI 430 Ferritic Stainless Steel Weldments -Taguchi Approach, Materials and Design,36, pp.443-450,2012, 0261 3069,doi:10.1016/j.mardes. 2011.11.063,Impact factor:2.2

28. R. Sudarshan, J. Babu and Dr P. Ravinder Reddy , StaticAnalysis of an Articulated Robot Manipulator Made of Composite Materials using FEA, International Journal of Engineering Research and Technology (IJERT), Volume 4, Number 4 , pp. 373-380, (2011)  

29. J. Babu, R. Sudarshan and Dr P. Ravinder Reddy , Experimental and Finite Elementanalysis of Impact Testing ofAdvanced Ceramic Composites, International Journal of Engineering Research and Technology (IJERT), Volume 4, Number 4 , pp. 381-390, (2011)

30. G. Malliah, P.Ravinder Reddy, A. Kumar, Effect of Aluminum Addition on Mechanical Properties of AISI 430 Ferritic Stainless Steel GTA Welds, International journal ofMechanical Engineering and Materials Sciences, 4(2),July-December 2011,pp.73-78

31. G. Malliah, P.Ravinder Reddy, A. Kumar, Effect of Aluminum Addition on Mechanical Properties of AISI 430 Ferritic Stainless Steel GTA Welds, International journal ofMechanical Engineering and Materials Sciences, 4(2),July-December 2011,pp.73-78

32. P. Saidi Reddy, R.L.N Sai Prasad, D. Sen Guptha,M. Sai Shankar, K. Srimannarayana, P. Ravinder Reddy,Quasi Distributed Fiber Bragg Grating array sensor for Furnace applications, Photonic Sensors,DOi. 10.1007/s13320-012-0046-7,December 2011,Springer link,Impact factor:1.573

33. E.V.Ramana and Dr P. Ravinder Reddy, Integration Of Control Charts And Data Mining For Process Control And Quality Improvement, International Journal of Advances in Engineering & Technology (IJAET), Vol. 2, Issue 1, pp. 640-648 , Jan 2012 ISSN: 2231-1963

34. K. Bala Showry, Dr. A.V.S. Raju, Dr. P. Ravinder Reddy,Multi-Dimensional Modeling of Direct Injection Diesel Engineand Effects of Split Injection, International Journal of Scientific and Research Publications, Volume 2, Issue 1, ISSN 2250-3153, pp. 1-8,January 2012

35. Thahar Ali Syed, Ratnakar Pandu, Mohan Rao G.K, Ravinder Reddy P, Eswara Prasad K, Design and Development ofZNO Nanotube Based PhotoElectrodes for Dye Sensitized Solar Cells, International Journal of Scientific and Research Publications, Volume 2, Issue 5, May 2012, ISSN 2250-3153

36. GM Sayeed, Dr P Ravinder Reddy, Experimental Investigation of Magneto Rheological Damping Effect on Surface Roughness of Work piece during End Milling Process, International Journal of Precision Engineering and Manufacturing, Vol. 13,No. 6, pp.835-844, June 2012. Impact factor:1.141

37. P. Rama Lakshmi, Dr P.Ravinder Reddy, Investigation of interlaminar shear strength in carbon epoxy and carbon epoxycarbon nanotubes using experimental and finite element technique, International Journal of Engineering Research andApplications (IJERA), ISSN: 2248-9622 ,Vol. 2, Issue 3, May-Jun 2012, pp.001-010

38. G. Malliah, P.Ravinder Reddy, A. Kumar, G. Madhusudan Reddy, Effect of Titanium addition on Mechanical Properties of AISI 430 Ferritic Stainless Steel GTA Welds, Steel Grips Journal of Steel and related Materials,v10, pp.446-451, 2012, ISSN 1866-8453

39. A.A. Sri Rama Krishna, Dr.P.Ravinder Reddy, TemperaturePrediction in Orthogonal Machining of A1/SiCp Composite , International Journal of Emerging Technology and Advanced Engineering, Volume 2, Issue 6, June 2012, pp. 223-229, ISSN 2250-2459.

40. R Uday Kumar, P Ravinder Reddy and A V Sitaramaraju, Determination of Blank Holder Pressure in Hydroforming Deep Drawing Process, Int. J. Mech. Eng. & Rob. Res., Vol. 1, No. 2, July 2012, ISSN2278 – 0149

41. P.Srinivasarao, Dr. P. Ravinder Reddy, K. Baba Saheb, Design of Hybrid Power Generation Using Solar Tracking PV Module and Wind Turbine, International Journal of MechanicalEngineering and Technology (IJMET), ISSN 0976–6340(Print), ISSN 0976 – 6359 (Online), Volume 3, Issue 2, May-August (2012), pp. 453-461, Journal Impact Factor (2012): 3.8071 (Calculated by GISI)

42. Dr P.Ravinder Reddy., Dr K.Srihari., Dr S. RajiReddy., Combined Heat And Mass Transfer in MHD Three-Dimensional Porous Flow with Periodic Permeability & HeatAbsorption, International Journal of Mechanical Engineeringand Technology (IJMET), ISSN 0976–6340(Print), ISSN 0976 –6359 (Online), Volume 3, Issue 2, May-August (2012), pp.

573-593, Journal Impact Factor (2012): 3.8071 (Calculated byGISI)

43. G M Sayeed Ahmed, P.Ravinder Reddy, N.Seetharamaiah, Experimental Evaluation of Critical depth of cut with Magneto Rheological Damping in End Milling Process, International Journal of Scientific and Research Publications, V2, issue8,pp.1-11,Aug.2012,ISSN2250-3153.

44. Dr.B.Balakrishna, S. Venkateswarlu, Dr P. Ravinder Reddy, Flow Analysis of an Atmosphere Reentry Vehicle, International Journal of Engineering Research and Development, Volume 3, Issue 4 (August 2012), PP. 50-55, e-ISSN: 2278-067X, p-ISSN: 2278-800X.

45. Mallaiah, G., Kumar, A., Ravinder Reddy, P., Madhusudhan Reddy, G, Influence of grain refining elements on mechanical properties of AISI 430 ferritic stainless steel weldments -Taguchi approach. Materials & Design, volume 36, year 2012, pp. 443 – 450. Impact factor 2.913. ISSN: 0261-3069

46. P. Rama lakshmi and P. Ravinder Reddy, Investigation ofFracture Parameters in Carbon Epoxy and Carbon Epoxy carbon nano tubes using Experimental and Finite element technique, IJMEMS,5(I),Jan-June 2012,pp.13-18

47. P.Srinivasarao, Dr. P. Ravinder Reddy, Dr.K.Vijaya Kumar Reddy, Advance Power Plant Technologies and Steam Cycle for Super Critical Application, International Journal of Scientific and Research Publications, Volume 2, Issue 9, ISSN 2250-3153, September 2012

48. B.Balakrishna, P. Sri Seshavani, Dr. P. Ravinder Reddy,Effect of Angle of Flap on Lift and Drag in a Flapping Wing Flight, International Journal of Mechanical Engineering (IJME), ISSN: 2319-2240, Vol.2, Issue 1 Feb. 2013,pp. 29-36,IASET

49. B.Balakrishna, Sushma Indan, P. Ravinder Reddy, Investigation of Supersonic Flow Through Conical Nozzle With

Various Angles of Divergence, International Journal of Mechanical Engineering (IJME), ISSN: 2319-2240, Vol.2, Issue1., Feb. 2013, pp. 09-16, IASET

50. Mallaiah Gurram, Kumar Anil, Ravinder Reddy Pinninti, Madhusudhan Reddy Gankidi ,Effect of copper and aluminium addition on mechanical properties and corrosion behaviour ofAISI 430 ferritic stainless steel gas tungsten arc welds.J. Mater. Res. Technol.( Journal of Materials Research and Technology ), Feb.2013;V2,n3, pp.238-249. ISSN:2238-7854

51. E.V.Ramana, Dr. P. Ravinder Reddy, Data Mining for Knowledge Discovery and Quality Improvement of TMT Bar Re-Rolling Process, International Journal of Mechanical Engineering & Technology (IJMET), 4(3), pp.281-288, ISSN:0976-6340(print), 0976-6359(online),Impact factor:5.7731,May-June 2013.

52. P. Srinivasa Rao, Dr. K. Vijaya Kumar Reddy, Dr. P.Ravinder Reddy , Design And Development Of Small Wind EnergySystems Is A Soft Path For Power Generation And EnvironmentConservation For Off Grid Applications In India.International Journal of Engineering Research andApplications (IJERA), Vol. 3, Issue 3, May-Jun 2013, pp.194-200, ISSN: 2248-9622, www.ijera.com

53. Rajkumar V. Patil, Dr. P. Ravinder Reddy, Dr. P. Laxminarayana, Buckling Analysis of Straight Helical Compression Springs Made of ASTM A229 Gr-II, ASTM A 313 Materials (Type 304 & 316), International Journal of Engineering Research & Technology (IJERT), ISSN: 2278-0181, Vol. 2 Issue 6, pp.978 -986, June - 2013

54. Ch.V.Sushma, Dr. P. Ravinder Reddy, P. Rama Lakshmi, Investigation of Fracture Parameters of Compact Tension Specimen By FEA, International Journal of Engineering Research & Technology (IJERT), Vol. 2 Issue 6, June – 2013, pp. 1587-1591. ISSN: 2278-0181.

55. E.V.Ramana, Dr. P. Ravinder Reddy, Optimization of ShotPeening Process Parameters Using Taguchi Approach and Validation by Data Mining, International Journal of Engineering Scienceand Technology (IJEST), V5,no.7, pp.1471-1475, ISSN : 0975-5462, I.C value: 3.14,July.2013

56. Dr. P. Ravinder Reddy, P. RamaLakshmi, P. Anjani Devi, Influence of Stiffeners on Fracture Parameters in Isotropic and Orthotropic Materials, International Journal Of Scientific Research,Volume : 2 , Issue : 8 , August 2013, ISSN No 2277 – 8179,pp.157-159

57. Y. Venkata Narayana,, Jagadish Babu Gunda, P. Ravinder Reddy, R. Markandeya, Non-linear Buckling and Post-buckling Analysis of Cylindrical Shells Subjected to Axial Compressive Loads: A Study on Imperfection Sensitivity, Nonlinear Engineering, De Gruyter. DOI: 10.1515,Aug.2013

58. Dr. P. Ravinder Reddy, N.L.S. Himaja, M.VijayaBharathi, P. Naveen Kumar,Parameter Optimization andPrediction of Bead Geometry of SAW Using Response SurfaceMethodology, International Journal of Emerging Technologiesin Computational and Applied Sciences (IJETCAS),International Association of Scientific Innovation andResearch (IASIR),pp.61-69,September 2013, ISSN (Print):2279-0047 ISSN (Online): 2279-0055

59. P.Ashok Kumar, Dr.P.Ravinder Reddy ,M.Santhosha Kumari,Dr.A.V.S.S.K.S. Gupta, Assessment of SIF’s for a Crack withSingle and Double Patches Using FEM, International Review ofApplied Engineering Research (IRAER)v3,n1,pp.13-21, ISSN No.2248-9967, 2013

60. A.Joshi Gowri Sankar, Dr. P. Ravinder Reddy, Ch.V.Sushma, Buckling Analysis of Thin Carbon/Epoxy Plate byUsing FEA, International Journal of Engineering Research & Technology (IJERT), , Vol. 2 Issue 9,pp.515-523., September – 2013, ISSN: 2278-0181

International Conferences : 42

1. Ravinder Reddy P., Ramamurthy G., Rohit Reddy G., Ravi VarmaP., ‘Distributed networking of CAD/CAM system andintegration of CAD/CAM with FEM’, International conferenceon Automation (ICAUTO-95), Dec 12-14, Indore, 1995, pp. 177-182

2. Ravinder Reddy P., Rohit Reddy G., Ravi Varma P., ‘ParallelComputing of CAD/CAM with FEM’, International conference onCIM, (1995), Singapore, pp. 180-185

3. Ravinder Reddy P., et al, ‘Statistical Process Systems toReduce Blowholes on Ford 3600 L.H.Housings’, Aug.4-6,International Conference on Quality Engineering Management(ICQEM-95) at PSG College of Technology, (1997), Coimbatore,pp.269-275

4. GCM Reddy, Ravinder Reddy.P, Computer Aided Monitoring ofBlanking and piercing operations, in sheet metal working ofproceedings of International Conference on Information Tech.Integration for Manufacturing, Center for Agilemanufacturing Banglore University, Bangalore, Dec. 27-30,(1998), pp.211-215

5. Ravinder Reddy. P, Ramamurthy, G, ‘Investigation of StressConcentrations composites due to Thermal Loads using aFinite Element Analysis’, proceedings of 14th Internationalconference on CAD/CAM, Robotics & Factories of the future(CAR & FOF ’98), PSG college of Technology, Coimbatore,India, pp 86,94, Dec.(1998).

6. Ravinder Reddy, P. Raghunatha Reddy, A.V, ‘Modeling of thisstructures using cyclides, proceeding s of 14thInternational conference on CAD/CAM, Robotics & Factories ofthe future (CAR & for’98), PSG college of Technology,Coimbatore, India pp 44-53, Dec.(1998).

7. Ravinder Reddy. P,‘et al, ‘ The Vibrational characteristicsof Turbojet Engine using FEA’, ASME Mechanics and MaterialsConference, June 27-30, Virginia polytechnic Institute andstate University, Blacksburg, NA 24061,1999, pp. 40-46

8. Ravinder Reddy.P., ‘Micro mechanical analysis of 3D carbon-carbon composites using FEM’, proceedings of Internationalconference on Intelligent flexible autonomous manufacturingsystem, IFAMS-2000 Jan. 10-12, 2000, Coimbatore, pp.375-385

9. Ravinder Reddy. P., ‘Recognition of chatter with neuralnetworks for turning processes’, International conference onmanufacturing ICM 2000, Feb. 24-26, Dhaka, Bangladesh(2000), pp.17-23

10. CRK Reddy, Ravinder Reddy. P., ‘Character recognition offractal images’, International conference on manufacturing,ICM 2000, Feb. 24-26, Dhaka, Bangladesh, pp. 185-201

11. Ravinder Reddy. P., ‘Computer aided analysis of gas turbinerotor blades using FEA’, ANSYS International conference and

exhibition, ANSYS INC, South point, 275 Technology drive,Canonsburg, PA 15317, Aug 28-30, 2000, pp.82-87.

12. Ravinder Reddy, P, Ratnakar Pondu, et al , ‘ StabilityAnalysis of Humonoid robotic arm using Finite ElementAnalysis’ Second International Conference on Logistics andSupply Chain Management (ILSCM 2004), Aug. 3-5,2004 at PSGCollege of Tech. Coimbatore.

13. Ravinder Reddy,P.,Reddy, P R K., Shashikanth Reddy,P.,Experimental and Numerical Investigations on Pre-ProcessesFGM, International Conference on Comp. Exp. Engng& Sciences,at IIT Chennai, Dec.1-6,2005

14. Ravinder Reddy,P.,Suryanarayana, B., Shashikanth Reddy,P.,Buckling Analysis of Orthotropic Sandwich Panels Using FEA,International Conference on Comp. Exp. Engng& Sciences, atIIT Chennai, Dec.1-6,2005

15. Ravinder Reddy, P., Nageswar Rao, D.K, Mallaiah, G.,Transient Analysis of the Welding process using Elementbirth and Movement Technique, 14th ISME InternationalConference on Mechanical Engng in Knowledge age, at DCE, NewDelhi, Dec.12-14,2005

16. Ravinder Reddy,P.,Suryanarayana, B., Buckling Analysis ofOrthotropic Sandwich Panels Using FEA, InternationalConference on Comp. Exp. Engng& Sciences, at GITAM-Vizag,Dec.7-9,2005

17. Ravinder Reddy,P.,RamaLakshmi,P., Aparna, S., Uniaxial andBiaxial Testing of Composite Beams Using Finite ElementAnalysis, Proceedings of International Conference onAdvances in Machine Design &Industry Automation, Jan. 10-12,2007,College of Engineering ,Pune,India

18. K. Eshwar Prasad, P. Ravinder Reddy ,Y.Sujatha Reddy ,K.Kalyani Radha,Jung-Su Han, Combustion Modeling in LiquidRocket Engine using Unsymmetrical Di-Methyl Hydrazine (UDMH)as Fuel and Nitrogen Tetroxide (N2O4) asOxidizer,Proceedings of the International Conference & XXNational Conference on I.C. Engines And Combustion, December6-9, 2007,pp.845-850.

19. Ravinder Reddy,P.,RamaLakshmi,P., Aparna, S.,RaInvestigation of Stress Intensity Factors in Carbon EpoxyComposite Shell using Finite Element Analysis, for the

presentation and publication in the Proceedings of CAE –07,at IIT Chennai during Dec.13-15,2007,pp.169-176.

20. Dr P Ravinder Reddy, G. Laxmaiah, PSD Analysis of the Shellof a Compressor, International Conference on VibrationEngineering and Technology on Machinery (VETOMAC-IV),Dec.17-19,2007, pp.401-411

21. N.V. Srinivasulu, Dr P Ravinder Reddy, Dr CK Rao, AThirupathi Reddy, Effect of Modular Ratio and Height toThickness Ratio on Modal Analysis of a Thin Walled CompositeI-Beam, International Conference on Vibration Engineeringand Technology on Machinery (VETOMAC-IV), Dec.17-19,2007,pp.275-282.

22. Ravinder Reddy,P.,RamaLakshmi,Padmaja,D S S Kameswari ,Investgation of Sif And J-Integrals In Composite Plates WithCracks”, Proceedings of International conference on RecentAdvances in Materials, Processing and Characterization,pp.27-33,2008,India

23. R.Uday Kumar, Dr P.Ravinder Reddy, Dr A.V. Sitaramaraju, “Analysis of Stresses in Hydrodynamic Deep Drawing Process”,Proceedings of ISRS-08,pp.213-223,2008,at IIT Madras

24. Khadar Vali,S, Dr P.Ravinder Reddy, Dr.P. Ram Reddy, “Three Dimensional Geometric Model For Woven Fiber Composites”, Proceedings of ICCMES-09,pp.194-197,2009

25. S. Mujeeb Quader, Dr P. Ravinder Reddy,“ Numerical Investigation of Effect of Die Filling and Particle Distribution in Particulate Metal Matrix Composites”, Proceedings of ICCMES-09, pp.220-225, 2009

26. Ratnakar Pondu, P.Ravinder Reddy, Gupta,AVSSKS., “Nonlinear Elastic Behaviour of Multi Walled Carbon Nanotubes using F.E. Method, Proceedings of ICCMES-09, pp.347-355, 2009

27. NLN Reddy, P.Ravinder Reddy, “ Analysis of Heat Exchanger Using Finite Element Analysis”, Proceedings of ICCMES-09, pp.617-624, 2009

28. R. Uday Kumar, Dr P.Ravinder Reddy, “ Analysis of Radial Stresses in Hydrodynamic Deep Drawing Process”, Proceedings of ICCMES-09, pp.743-752, 2009

29. N.V Srinivasulu, Dr P.Ravinder Reddy, “ Finite Element Analysis of Thin Walled Tapered Cantilever Composite I-Beam,Proceedings of ICCMES-09, pp.801-805, 2009

30. G. Laxmaiah, Dr P. Ravinder Reddy, “ Noise Reduction in Hermitically Sealed Reciprocating Compressor-A PSD Approach”, Proceedings of ICCMES-09, pp.829-837, 2009

31. R. Uday Kumar, Dr P.Ravinder Reddy, Dr A.V Sitaramaraju, “effect of Viscosity on Radial Stress, Drawing Stress andDrawing Force in Fluid Assisted Deep Drawing Process”,Proceedings of International Conf. on Recent Advances inMaterials, Processing and Characterisation,(INCAMA-2009),pp.71-81,2009, Kalassalingam Univ.Chennai.

32. R. Uday Kumar, Dr P.Ravinder Reddy, Dr A.V Sitaramaraju, “ Effect of Viscosity and Blank Geometry on Hoop Stresses in Fluid Assisted Deep Drawing Process”, Proc. Of the International Conference on Emerging Research and Advances in Mechanical Engineering, ERA 2009,Velammal Engineering Colege,Chennai,pp.688-694,2009

33. Ratnakar Pondu, P.Ravinder Reddy, Gupta,AVSSKS,“Growth andCharacterization of Carbon Nanotubes and Simulation Studieson Structural Behavior of Single-Walled Carbon Nanotubesunder ElasticBending and Buckling Loads, InternationalSymposium for Nano Materials (ISNM-09) being organized by usat Kanya Maha Vidyalaya, Jalandhar during Oct 28-29, 2009.

34. Dr P ravinder Reddy, G malliah, Dr A Kumar, Effect ofTitanium Addition on Mechanical Properties of FerriticStainless Steel Welds, International conference on Advancesin Cutting, Welding & surfacing, (IWS)pp. AN1-An8., Dec..22-23,2011, Codissia Trade Fair complex, Coimbatore, India

35. Dr P. Ravinder Reddy, Dr R Uday Kumar and Dr AVS SitaramaRaju, Evaluation Of Fluid Pressure In Deep Drawing ProcessThrough CFD Analysis, International Conference onMaterials Processing and Characterization - [ ICMPC -2012 ] March 8-10, 2012,, Gokaraju Rangaraju Institute ofEngineering and Technology, Hyderabad, Andhra Pradesh,INDIA.pp.73-76, 2012

36. M. Sayeed Ahmed, Dr. P.Ravinder Reddy,N.Seetharamaiah,Experimental determination of dynamic properties of end millcutter by an application of magneto rheological damperduring machining, International Conference on MaterialsProcessing and Characterization, March 8-10, 2012,Hyderabadorganized at Gokaraju Rangaraju Institute of

Engineering and Technology, Hyderabad, AndhraPradesh,INDIA,pp.221-226,2012.

37. Dr. S. Khadar Vali, Dr. P. Ravinder Reddy, G.M. SayeedAhmed, Dr. P. Ram Reddy, Evaluation of Mechanical Propertiesof 3D Carbon Fiber/SIC Composites prepared by LSI, RITS-ICAEM 2012 RITS- International Conference on Advancement inEngineering and Management,2012

38. Mr. K B Jagadeeshgouda, Dr. P Ravinder Reddy, Dr.KIshwaraprasad, Tensile and hardness test on avian fiber(barbs) reinforced polymer composite material, InternationalConference on Materials Processing and Characterization,March 8-10, 2012, Hyderabadorganized at Gokaraju RangarajuInstitute of Engineering and Technology, Hyderabad, AndhraPradesh,INDIA, pp.288-292,2012.

39. S. Mujeeb Quader, Dr. P. Ravinder Reddy, Dr. B.S.N. Murthy,Phenomena of wettability in particle reinforced hybrid metalmatrix composites, , International Conference on MaterialsProcessing and Characterization, March 8-10, 2012,Hyderabadorganized at Gokaraju Rangaraju Institute ofEngineering and Technology, Hyderabad, Andhra Pradesh,INDIA,pp.321-327,2012.

40. Dr P. Ravinder Reddy, Dr R Uday Kumar and Dr AVS SitaramaRaju, CFD Analysis On Effect Of Punch Radius On FluidPressure In Fluid Assisted Deep Drawing Process,International Conference On Advancements In Engineering &Management – [ ICAEM - 2012 ] , Royal Institute ofTechnology & Science, Hyderabad, Andhrapradesh, INDIA.

41. Ch.V.Sushma, Dr. P. Ravinder Reddy,P. Rama Lakshmi,Investigation Of Fracture Parameters Of Compact TensionSpecimen By FEA, International Journal of EngineeringResearch & Technology (IJERT), ISSN: 2278-0181, Vol. 2 Issue6, June – 2013,pp.1587-1591.

42. Y.Venkata Narayana,, Jagadish Babu Gunda, P. Ravinder Reddy,R. Markandeya, Nonlinear Buckling and Post-buckling Analysisof laminated Composite Cylindrical Shells Subjected toAxial and Pressure Loads, The Ninth International Conferenceon Vibration Engineering and Technology of Machinery(VETOMAC-IX) 21-23 (Wednesday – Friday) August, 2013,

Nanjing University of Aeronautics and Astronautics, Nanjing,P.R. CHINA

National Conferences : 55

1. Ravinder Reddy P., ‘Interfacing CAD with CAM’, Symposium onmanufacturing Technologies for the Nineties, REC Warangal,Nov. 29-30,(1991), pp. 70-78

2. Ravinder Reddy P., Reddy P.R.K., Chamundeswari., Sridevi.,‘Stress Intensity Factor in Cylindrically OrthotropicComposite Plates with a Circular Hole’, Proc of IX – ISMEConference on Mech, Engg., UOR, Nov. 10-11, (1994),00. 503-510

3. Ravinder Reddy, P.,Jayapal Reddy. P. Rao. Bck, Somidas. V.,‘Modeling Techniques and Analysis of 3-D components ThroughFinite Element Method’,. Proc of 10th National Conv., Instof Mech. Engg., Nov. 5-7, (1994), pp. 101-108

4. Ravinder Reddy P., Rama Murthy G., ‘ Design as IntelligentBehaviour: ICAD in Engg. Design’, Proc of 10Th NationalConv., Inst of Mech. Engg., Nov. 5-7, (1994), pp. 160-165

5. Ravinder Reddy P., Rohit Reddy G., Ravi Varma P., ‘ComputerAided Engineering in Die Design with cost Effectiveness, ‘Proc of IICT Golden Jublee Sem on CAE of Process Plants,Nov. 16-17, (1994), pp. 80-85

6. Ravinder Reddy P., Rohit Reddy G., Ravi Varma P., ‘ExpertSystem Guided Management for Machine Tool Technology, ‘Procof IICT Golden Jublee Sem on CAE Process Plants, Nov. 16-17,(1994), pp. 91-96

7. Ravinder Reddy P., Laxminarayan N., Reddy B.U., Sridhar C.,‘Artificial Intelligence: It’s Present and potential use inManufacturing Systems’, Proc of IICT Golden Sem on CAEProcess Plants, Nov. 16-17, (1994), pp. 101-105.

8. Ravinder Reddy P., Ramamurthy G., ‘ SIF using FEA inrectangular orthotropic Composite Annular Disk, NatConference on QUEST 95, DRDL Hyderabad, Oct. 13-14, (1995).

9. Ravinder Reddy P., Ramamurthy G., ‘Stress Intensity Factorusing FEA in Rectangular Orthotropic Composite AnnularDisk’, National Conference on QUEST-95, DRDL Hyderabad, Oct13-14, (1995), pp. D12-D19

10. Ravinder Reddy P., Ramamurthy G., Reddy G.C.M., CAD DataTranfer and Integration with FEM’, National Conference onQUEST-95, DRDL Hyderabad., Oct. 13-14, (1995), pp. H50-H55

11. Ravinder Reddy P., Ramamurthy G., Rohit Reddy G., Ravi VarmaP., Mallesh D., ‘CAE and Analysis of Epoxy-ConcreteComposite Structure’, National Conference on ‘QUEST-95, DRDLHyderabad., 13-14, (1995), pp. D7-D11.

12. Ravinder Reddy P., Ramamurthy G., ‘Composites as AlternativeMaterials for Robotics’. National Conference on Machines andMechanisms (NACOMM-95), Jan 20-21, CMERI, Durgapur, 1995,pp. 101-106

13. Ravinder Reddy P., Ramamurthy G., ‘Computer Aided Analysisof Thermally Air Gap Insulated Pistons made of Composites’,National Conference on Machines and Mechanisms (NACOMM-95),Jan 20-21, CMERI, Durgapur, 1995, pp. 177-180

14. Ravinder Reddy P., Rammurthy G., ‘Fracture Mechanics Basedanalysis of high speed turbine rotor made of FRP compositewith surface crack using Finite Element Analysis’, 11TH

national conference of aerospace engineer, Inst of Engg., 5-7, March (1996), pp. 19-26

15. Ravinder Reddy P., Ramesh N., et al ‘ Evaluation of GearTooth and Root Stresses and Natural Frequencies of SpurGears made of Carbon-Carbon Composites using FEA’, 17Th

AIMTDR conference, 9-11, Jan 1997, REC, Warangal, pp. 189-194

16. Ravinder Reddy P., Ramamurthy G., ‘Tool Wear in CuttingCarbon Fibre Reinforced Plastics (the effect of physicalproperties of tool materials)’, 17Th AIMTDR Conference, 9-11, Jan. 1997, REC, Warangal, pp. 219-225

17. Janardhan Reddy T., Ravinder Reddy P., Chennakesava Rao B.,‘Structural Deflection of Milling Machine Column underDynamic Loads and the Resulting Variation in Depth of Cutusing FEM’, 17Th AIMTDR Conference, 9-11. Jan.1997, REC,Warangal, pp. 301-305.

18. Ravinder Reddy P., et al,‘SIF in Cylindrical Shafts usingFEA’, 2Th National Conference on Emerging Trends in Designand Engineering, Inst. Of Engineers MNREC, Allahabad-97. pp.111-116

19. Ravinder Reddy P., Rajeshwar M., ‘Computer Aided Design andAnalysis of Chemical Plant Equipment’ Technical Conferenceon Pressure Vessels and piping, Oct.22-24, 1997 IICT,pp.131-134

20. Ravinder Reddy P., Sudhakar Reddy K., Reddy D.N.,‘Development of Overlaying Procedures for Cupr-Nicker andmone on Carbon Steel’ Technical Conference on PressureVessels and piping, Oct.22-24, 1997 IICT, pp.22-27

21. Ravinder Reddy P., ‘Aided Analysis of Large ParabolicAntenna Structure using Finite Element Analysis’, NISA, userConference, nov.10-11, (1997). IISC, Banglore, pp. 211-219

22. Ravinder Reddy P., ‘Diminishing Environment PollutionThrough Low Mass Carbon-Carbon Composite Piston’, NationalSeminar on Energy for on better tomorrow Renewaste and Non-Reniwaste Energy Sources’, Dec. 26-28, (1997), KITS Ramtek,pp. 121-125.

23. Ravinder Reddy P., et al ‘Analysis of large parabolicantenna structure made of carbon-carbon compositesusing Finite Element Analysis’, Nat. Conf. On Machines andMechanisms, NACOMM-97, IIT Kanpur, (1997), pp. 250-256.

24. Ravinder Reddy P., ‘Business Process Reengineering forOrganizational Success in an Industry’, National Conferenceon Industrial Engineering towards 21St Century, to be heldon Jan 31-Feb 2, (1998), SVU Tirupathi, pp. 250-253.

25. GCM Reddy , Ravinder Reddy P., et al ‘ A New Technique forthe Measurement of Process Parameters in Metal FormingOperations’, National Conference on Industrial Engineeringtowards 21st Century, Jan. 31-feb.2, SVU, Tirupati (1998),pp.242-244

26. Ravinder Reddy. P, “CAD data integration with FEA andexperimental investigations”, Proceedings of Nat. Workshopon CAD, at KITS Warangal, (Feb 1998), pp.27-35.

27. Ravinder Reddy. P., “Geometric modelling techniques and RPTechnology”, Proceedings of winter school on CAD/CAM,Organized by JNTU Kukatpally, (1998)

28. Ravinder Reddy. P, Ramamurthy, G,’ Experimental and Numerical Analysis of Orthogonal cutting of carbon- carboncomposites’, Proceedings of the 18th All India Manufacturing

Technology Design and Research Conference, IIT Kharagpur, Dec.21-23, 1998, India.

29. Ravinder Reddy. P, ‘Failure Analysis of Hot Reheat & LPBypass piping using Finite Element Technique’, Proceedingsof the 11th ISME Conference on Mech, Engg. Trends in MechEngg Education & Research, IIT New Delhi,’ Feb.3-5,1999.pp.587-593.

30. Ravinder Reddy. P, Ramamurthy, G,’ Fracture Analysis ofCeramic Composites using Finite Element Analysis’,Proceedings of the 11th ISME Conference on Mech, Engg.Trends in Mech Engg Education & Research, IIT New Delhi,’Feb.3-5,1999.pp.594-600.

31. Ravinder Reddy. P, ‘ Computer Aided Modeling and Analysisfor Predicting the Mechanical properties of wovencomposites’, National Conference on Quality Engg inAerospace Technology (QUEST-99), CEMILAC, Bangalore, May(1999), pp. D19-D23

32. Ravinder Reddy. P, ‘Generation of NURBS surface by skinningcross sectional curves, ASME National Conference on QualityEngg. in Aerospace Technology (QUEST-99),CEMILAC, Bangalore,May (1999), A54-A59.

33. Ravinder Reddy.P., ‘LCF analysis of 175 MW turbinecomponents using FEM’12TH ISME conference, CrescentEngineering College, Vandalur, Chennai, Dec. 2-4 (2000), pp.176-181

34. Ravinder Reddy.P., ‘Computer aided structural and thermalanalysis of gas turbine rotor’12TH ISME conference, CrescentEngineering College, Vandalur, Chennai, Dec. 2-4, (2000),pp. 61-66.

35. Ravinder Reddy.P.,Prediction of elastic properties of plainknitted fabric reinforced composites using fem, NationalConf. On Quality Engineering in AerospaceTechnologies(QUEST), Nov. 23-24,2001, VSSCISRO,Thiruvananthapuram., Kerala.

36. Ravinder Reddy.P.,Prediction of elastic properties of plainknitted fabric reinforced composites using fem, NationalConf. On Quality Engineering in AerospaceTechnologies(QUEST), Nov. 23-24,2001, VSSCISRO,Thiruvananthapuram., Kerala.

37. Ravinder Reddy.P., Transient analysis of 1.75 MW TurbineComponents Using FEM, National Conf. On Quality Engineeringin Aerospace Technologies(QUEST), Nov. 23-24,2001, VSSCISRO, Thiruvananthapuram., Kerala.

38. Ravinder Reddy.P., Sriramakrishna, A.A.,Numerical analysisof Orthogonal cutting of Metal Matrix composites, NationalConf. On Quality Engineering in AerospaceTechnologies(QUEST), Nov. 23-24,2001, VSSCISRO,Thiruvananthapuram., Kerala.

39. Dr. P. Ravinder Reddy, Ratnakar Pandu ,’The Effect ofProcess Parameters on Steel Welding Response in CurvedPlates, Proceedings of national Conference on Advances inJoining Technologies’, pp. 204-210.,March 2004., Vasavicollege of Engg., Hyderabad

40. Dr P. Ravinder Reddy, A.A. Srirama Krishna, ‘Bucklinganalysis of orthotropic sandwich panels’, Nat. Conference onAdvanced Materials and Manuf. Techniques (AMMT-2004), March.8-9, 2004 at JNTU, Hyderabad.

41. Dr. P. Ravinder Reddy, Buckling Sensitivity Analysis of CFRPdome closures, National Conference on the state of Art ofTechnologies in Mech. Engg (NCSAME – 2004), June 29-30, 2004at JTNU, Hyd.

42. Dr. P. Ravinder Reddy, et al, Parametric Modeling throughVBA Customization tool in CATIA and Analysis of Turbineblade, National Conference on the state of Art ofTechnologies in Mech. Engg (NCSAME – 2004), June 29-30, 2004at JTNU, Hyd.

43. Dr. P. Ravinder Reddy, B. Suryanarayana, National conferenceon recent trends in CAD/CAM, Guru Nanak Dev Engg.College,Bidhar, Karnataka, 29-30th July 2004.

44. Dr P.Ravinder Reddy, D.K Nageswar Rao, G. Mallaiah, 3-DFinite Element Modeling of The Welding Process Using ElementBirth And Element Movement Techniques, National ConferenceOn Computational Methods In Mechanical Engineering(Computime), Sept.16-17th,2005.

45. Dr P Ravinder Reddy, Laxmaiah,G, Ravindra Reddy,P.V.R.,Elsto Plastic Analysis of Turbine Blade rotor Using FEA,14th National Convention of Mech. Engineers, IIEVisweswaraih Bhavan,Khairatabad.

46. Dr P Ravinder Reddy, NCS Reddy, Ratnakar Pondu, Dr BAnjaneya Prasad, Modeling and Analysis of CNT Composites andtheir Thermal Properties using Finite Element(FE) Method,National Conference on Aerospace Engineering (NCAE-09),MRCET, Secunderabad,4-5th December,2009,pp.124-132.

47. Dr P Ravinder Reddy, S. Sapthagiri, Ratnakar Pondu, Dr BAnjaneya Prasad, NCS Reddy, Synthesis and Characterizationof Nano Ferroelectric Materials-A case study, NationalConference on Aerospace Engineering (NCAE-09), MRCET,Secunderabad, 4-5th December, 2009,pp.179-183.

48. K. Blashowri, A.V. Sitaramaraju, P.Ravinder Reddy, K.EswaraPrasad, Simulation of Diesel Engine Combustion Using SplitInjection, Proceedings of the 21st National Conference on ICEngines and Combustion, Davangere, Karnataka,pp. 509-517,Dec. 10-12,2009, India

49. Dr P Ravinder Reddy, G Malliah, Dr A Kumar, Effect ofAluminium addition on Mechanical Properties of FerriticStainless steel Welds, National Welding Seminar(NWS)2010,Welding Science & Technology in the present Global Businessenvironment, December 21-23,2010, Visakhapatnam Steel Plant,Visakhapatnam, AP, India

50. G. Mallaiah, Dr P. Ravinder Reddy, Dr A. Kumar, Influence ofAluminium and Copper addition on Microstructure andMechanical Properties of AISI 430 Ferritic Stainless SteelWelds, National Conference on Advances in MechanicalEngineering (AIME-2012), 18th Feb. 2012, organized by MED,Kamala Institute of Technology &Science, Huzurabad,pp.56-61.

51. D. Srikanth Rao, Dr P. Ravinder Reddy, Dr Sriram Venkatesh,Fabrication and Testing of Epoxy Glass Fiber, NationalConference on Advances in Mechanical Engineering (AIME-2012), 18th Feb. 2012, organized by MED, Kamala Institute ofTechnology &Science, Huzurabad,pp.124-128.

52. Y. Venkatanarayana, Dr P. Ravinder Reddy, Dr Markandeya,Composite Cylindrical Panel Buckling Analysis using FiniteElement Method, National conference on Recent Advances inMechanical Engineering (RAME 2012),organized by Dept. ofMech. Engg., College of Engg., Osmania University, 16-17th

March 2012,pp.31-35.

53 G. Mallaiah, Dr P. Ravinder Reddy, Dr A. Kumar, Influence ofCopper Addition on Microstructure and Mechanical Propertiesof AISI 430 Ferritic Stainless Steel GTA Welds, Nationalconference on Recent Advances in Mechanical Engineering(RAME 2012),organized by Dept. of Mech. Engg., College ofEngg., Osmania University, 16-17th March 2012,pp.95-100.

54. A.C Sekhat Reddy, Dr S. Rajesham, Dr P. Ravinder Reddy,Influence of Friction in Deep Drawing Process of AluminiumSheets, National conference on Recent Advances in MechanicalEngineering (RAME 2012),organized by Dept. of Mech. Engg.,College of Engg., Osmania University, 16-17th March2012,pp.114-1119.

55. D. Srikanth Rao, Dr P. Ravinder Reddy, Dr Sriram Venkatesh,Fabrication and Testing of Epoxy-Glass Fiber Shaft, Nationalconference on Recent Advances in Mechanical Engineering(RAME 2012),organized by Dept. of Mech. Engg., College ofEngg., Osmania University, 16-17th March 2012,pp.120-124.