OPS-MANUAL-AND-PARTS-LIST-F15-FORKLIFT.pdf - Winget
-
Upload
khangminh22 -
Category
Documents
-
view
2 -
download
0
Transcript of OPS-MANUAL-AND-PARTS-LIST-F15-FORKLIFT.pdf - Winget
F15 FORKLIFT(CAPACITY 1.5 TONNE)
ISSUED OCTOBER 1981REPRINTED OCTOBER 2002
OPERATINGINSTRUCTIONS
&SPARE PARTS
LIST
WINGET LIMITEDPO BOX 41
EDGEFOLD INDUSTRIAL ESTATEPLODDER LANE
BOLTONLANCS
BL4 OLSTEL: ++ 44 (0) 1204 854650FAX: ++ 44 (0) 1204 854663
[email protected]@winget.co.ukwww.winget.co.uk
INTRODUCTION
This Parts & Operators Manual is a re-print of the manual last published in 1981and contains some amended part numbers.
Health & Safety legislation and working practices applicable to Forklift Trucks,both 2 and 4 wheel Drive, Rigid Chassis and Articulated Chassis have changedconsiderably in the years since this manual was last published. We wouldrecommend that only trained operators who are in possession of the relevantcertification issued by a recognised Training Authority be allowed to operate thisequipment.
Reference is made on a number of pages to ‘bolt c/w nut and washer’, this nolonger the case, fixings such as nuts, bolts, screws and washers should beordered as individual items. A number of Whitworth and B.S.F fixings are now nolonger available, in these cases the nearest metric equivalent size will besupplied.
The contents of this manual although correct at the time of publication, may besubject to alteration by the manufacturers without notice and Winget Limited canaccept no responsibility for any errors or omissions contained within the followingpages. Nor can we accept any liability whatsoever arising from the use of thismanual howsoever caused.
Winget Limited operate a policy of continuous product development. Therefore,some illustrations or text within this publication may differ from your machine.
WINGET LIMITEDPO BOX 41
EDGEFOLD INDUSTRIAL ESTATEPLODDER LANE
BOLTON LANCS
BL4 OLSTEL ++ 44 (0) 1204 854650FAX ++ 44 (0) 1204 854663
E mail [email protected] [email protected] www.winget.co.uk