New Products Now Available from - Southern Lock

www.don-jo.com | 978-422-3377

Black Hardware Black Kick Plates

Hinge Shims

Ladder Pulls

Coat Hooks

Hinge Pin Door Stops

Door Flip Guards

New Products Now Available from

MISC. NON-LOCKING HARDWARE

SECTION 12

ORDER ONLINEwww.SouthernLock.com

ORDER ONLINEwww.SouthernLock.com Prices may not reflect recent price increases or manufacturer’s surcharges

MISC NON-LOCKING HARDWARESection 12 - 549

MISC. N

ON

-LOCK

ING

HA

RDW

ARE

Section Table of Contents

AAdapter Plates ............... 551, 563, 565ANSI Strikes .................................. 562

BBall Catches .................................. 558Bottom Sweeps ............. 557, 561–562Box Strikes ............................ 550, 555Brush Seals ................................... 561

CCabinet Catches ............................ 558

DDoor Guards .......................... 557, 561Door Holders ......................... 556, 559Door Lock Supports ....................... 557Door Reinforcers ........... 553–555, 561Door Seals ..................................... 562Door Silencers ............................... 558Door Stops ............ 556, 559, 565–566Door Viewers......................... 556, 565Drip Strips ..................................... 562

EElectric Strike Boxes ...................... 560

FFiller Plates ........................... 550–551Fire Seals ...................................... 562Flush Bolts .................................... 558

GGuard Plates.................................. 557

HHinge Repair Screws ..................... 556Hinge Shims .................................. 552Hudson Lock ................................. 557

JJamb Reinforcers .......................... 561

KKick Plates ............................. 555, 558Knob Protectors ............................. 560

LLatch Protectors ... 551–553, 557, 561, 563–565Lip Strikes ............................. 555–556

MMagnetic Catches .......................... 558Modernization Kits ........................ 560Mortise Conversion Plates ............. 556Mounting Brackets ........................ 561

OOffset Security Bars ....................... 562

PPanic Guards ................................. 566Pull Plates ..................... 555, 558, 566Push Plates ............................ 555, 558

RReplacement Strikes ...................... 555Replaement Strikes ....................... 565Roller Latches ............................... 558Rosettes ......................................... 560

SSaddle Thresholds ................. 562–563Scar Plates ............................ 550–551Security Guides ............................. 560Security Strikes ............................. 552

TThru Bolts ..................................... 565

VVertical Rod Protectors .................. 551

WWall Bumpers ................ 556, 559, 565

VendorsAdams Rite .................................... 550Don-Jo .................................. 550–556Doorscope ..................................... 556GKL ............................................... 556Hager ............................................ 557Hudson Lock ................................. 557Ives ....................................... 558–560Keedex .......................................... 560Kwikset ......................................... 560Major Mfg. .................................... 561NGP ...................................... 561–562NSP ............................................... 562Pemko ................................... 562–563Pro-Lok ................................. 563–564Sargent ......................................... 565Schlage ......................................... 565S. Parker........................................ 565Strike Rite ..................................... 565Trans Atlantic ................................ 565Trimco ........................................... 566

MISC NON-LOCKING HARDWARE Fax Your Order 800.447.2299


Prices may not reflect recent price increases or manufacturer’s surchargesMISC NON-LOCKING HARDWARE

Section 12 - 550

MIS

C. N

ON

-LO

CKIN

G H

ARD

WA

RE

ORDER # ITEM # PRICE

227-0025 DJO FS-260-PC $3.12

FS-260 ANSI Strike Filler PlateDimensions: 4-7/8” X 1-1/4”Prime coated steel, polybagged


227-0030 DJO EF-86 $5.40

EF-86 Mortise Edge Filler PlateDimensions: 1-1/4” x 8”Polybagged, 7 gauge (.180), steel

FPK-86 Filler Plate Kit • FS-260-PC (ANSI strike filler)• EF-86 (door edge filler)• Fasteners included • PolybaggedORDER # ITEM # PRICE

227-0010 DJO FPK-86 $10.80

4901 Deadlatch Box StrikeFlush mount flat strike. Standard slat strikeincludes molded black plastic dust box andclosure of the unused lower strike opening,with steel mounting plate. Long face isdesigned to span strike area of MS® deadlocks with which the deadlatch is interchangeable.• 630 Satin Stainless Steel• 121 Dark Bronze Ritecoat painted finish.


020-4901 ADA 4901-01-630 $20.90020-4902 ADA 4901-01-121 $27.50

SP-135 Scar Plates3-1/2” Diameter cover plate for 2-1/8” bore locks. Covers damaged door, changes 2-3/8” to 2-3/4” backset. Fits under knob or deadlock rose.POLYBAGGEDORDER # ITEM # PRICE

227-0360 DJO PBSP-135-605 Bright Brass $4.20227-0365 DJP PBSP-135-630 Stainless Steel $3.96227-0370 DJP SP-135-609 Antique Brass $6.00

CARDEDORDER # ITEM # PRICE

520-7035 DJP SP-135-630 Stainless Steel $5.28520-7040 DJP SP-135-605 Bright Brass $5.52


520-7020 DJO EF-161-BP $5.52520-7025 DJO EF-161-PC $2.64

EF-161 Latch Filler PlateFor 161 cut-out. 1-1/8” x 2-1/4”BP = Brass Plated PC = Prime Coat

FPK-161 Filler Plate Kit • BF-161-PC (2-1/8" round hole filler)• FS-260-PC (ANSI strike filler)• EF-161 (edge filler)• Fasteners included • Polybagged


227-0005 DJO FPK-161 $14.64

FF-45 Frame Filler PlateFrame hinge cut-out. 4-1/2” x 1-5/8”Prime coatORDER # ITEM # PRICE

227-0090 DJO FF-45 $3.60

Hole Filler PlatesBF-161: 2-5/8” outside diameter. Covers 1/2” to 2-1/8” holes. Self-centering disk prevents movement of plate


227-0015 DJO BF-161-PC $4.92227-0020 DJO BF-161-SL $7.38520-2110 DJO BF-161-BP $9.90520-2115 DJO BF-161-CP $8.82

520-2125 DJO PDF-161 $6.48

PDF-161: Covers holes up to 2-1/8” under rim panic devices

MISC NON-LOCKING HARDWARECall, Toll Free 1.800.282.2837



MISC. N

ON

-LOCK

ING

HA

RDW

ARE

NLP-210 Narrow Latch ProtectorUse with locks or escutcheons 3.5" wide or less. Concealed fastener. Heavy gauge steel. 1.5" x 10"


520-2100 DJO DSP-135-605 $5.52

DSP-135 Adapter Scar Plate2-5/8” outside dia. For rim or mortise cylinders.Covers up to 2-1/8” dia. hole. 1-1/4” inside dia.


227-0120 DJO AR-335-28 Alum $17.64

AR-335 Adapter PlatesFits most standard Grade 1 Key-in-Levers. For 1-3/8” doors. Two pieces per package

RPK-109 Remodeler Plate KitContains (2) RP-13509 Remodeler Platesand (1) CV-86-C Mortise Conversion Plate.605 = Bright Brass 630 = Stainless SteelORDER # ITEM # PRICE

227-0350 DJO RPK-109-605 $61.14227-0355 DJO RPK-109-630 $55.20

Vertical Rod Protectors• Assist in handicap conformance• Used in hospitals, schools, etc.• Installs with #6 x 3/4" screws directly

into the door on any type of wood, metal, or plastic door, any thickness.

• Covers the latching bolt and lower portion of the vertical rod assembly.

• Fire-rated

81

83

85


227-0075 DJO #81 2-1/8” Proj. $183.12227-0080 DJO #83 2-1/8” Proj. $183.12227-0085 DJO #85 24” x 1-1/16” $171.00

AL-211 Latch ProtectorDesigned for aluminum doors. 3-1/2” x 12”DU = Duranodic SL = Steel Silver Coat


505-1120 DJO AL-211-SL 12” $37.44505-1121 DJO AL-211-DU 12” $37.44

ELP-208 Latch Protector for Electric StrikesCompletely encases the keeper for maxi-mum protection. Silver Coated. 3-1/2” x 8” dimensions


227-0095 DJO ELP-208-SL $31.32


227-0070 DJO NLP-210-PC $24.96

9”9”

4.5”4.5”


227-0345 RP-13509-630-2 $17.52

RP-13509-2 Remodeler PlateRemodeler plate, 630 finish0.032 gauge, 9” L x 3-1/2” W

SLP-206 Short Latch Protector for Outswinging Doors• Use where larger latch protection won’t fit• May be used on hollow metal door using ASA strike plate• Dimensions 3” x 6”ORDER # ITEM # PRICE

227-0060 DJO 206-SL Silver Coat $16.92227-0065 DJO 206-BP Brass Plate $19.08

LP-312 Latch Protector for Outswinging Doors• For Adams Rite latch locks • Reversible• 1/4” offset, 1-1/8” backset • 1-7/16” hole • Heavy gauge steel • Dimensions 2-5/8” x 12”


227-0050 DJO LP-312-SL $21.12227-0055 DJO LP-312-DU $21.12




Section 12 - 552

MIS

C. N

ON

-LO

CKIN

G H

ARD

WA

RE

“Non Tarnish" Latch ProtectorsMade of Stainless Steel material and Aluminum based materials. All of these items prevent tarnishing and mate up with any existing 626 finish that may be on the door already.

LP-307 Latch Protector for Aluminum Entrance Doors• Solves pull handle interference• Reversible - 3/8” offset, fits oval cylinder (lock removal not required)• 12 gauge (.104) steel• Hand carriage bolt and rivet supplied• No specific tools required• Dimensions 2-5/8” x 7” x 1/8”


227-0300 DJO 307-DU $18.60227-0305 DJO 307-SL $17.52

PLP-211 Pin Latch Protector for Outswinging Doors• Solid steel pin prevents spreading of door from frame.• Pin is welded on back leaving no visible point of attack from outside.• Extra large cut out accepts up to 3.5” rose.• Fits 2-3/4 and 2-3/8” Backsets.• 12 gauge (.104) steel


227-0130 DJO 211-DU $19.14227-0135 DJO 211-626 $18.78

ORDER # ITEM # TYPE PRICE

227-1000 DJO LP-307-630 Storefront $26.76227-1005 DJO LP-111-630 11” Latch $29.64227-1010 DJO PLP-111-630 Pin Protector $29.64227-1015 DJO LP-107-630 7” Latch $35.64227-1020 DJO CLP-106-630 6” Commercial $31.56227-1025 DJO CLP-110-630 10” Commercial $33.12227-1030 DJO NLP-106-630 6” Narrow $27.96227-1035 DJO NLP-110-630 10” Narrow $31.20227-1040 DJO BLP-107-630 Large Rose $25.32227-1050 DJO KLP-110-LHR-630 Keyless $32.76227-1055 DJO KLP-110-RHR-630 Keyless $32.76

KLP-1101-1/2” x 10”

LP-3072-5/8” x 7”

LP-1113” x 11”

PLP-1113” x 11”

LP-1072-3/4” x 7”

CLP-1062-1/8” x 6”CLP-110

2-1/8” x 10”

NLP-1061-1/2” x 6”NLP-110

1-1/2 x 10”

BLP-1073-1/4” x 7”


227-0155 DJO HS-060 $2.04227-0140 DJO HS-090 $2.04

HS Hinge ShimsHS-060: 16 Gauge (0.60)HS-090: 13 Gauge (0.90)


110-2500 DJO 2-SDS-8-SL $14.88

2-SDS-8 8” Security Strike1-5/8” x 8” for 1-3/4” door




MISC. N

ON

-LOCK

ING

HA

RDW

ARE

17-S-CW• For Schlage King Cobra• Overall Size: 5" x 14"

17-PB-CW • For Schlage King Cobra• Overall Size: 5" x 14"

27-S-CW• For Alarm Lock T2 & T3• Overall Size: 5" x 14"

Wrap-Around Door Reinforcersfor Electronic Locksfor 1-3/4” Door Thickness

27-S-CW


227-0045 DJO ILP-206-SL 6” Length $18.12227-0040 DJO ILP-212-SL 12” Length $20.04

ILP In-Swinging Interlocking Latch ProtectorFor inswinging doors. For use with key-in-knob and deadbolt locks. Interlocks door & frame. Resists jimmying & prying. 14 gauge (.075) steel.

FOR 1-3/8” DOORSORDER # ITEM # BACKSET PRICE

520-1035 51-S-CW 2-3/8” $17.87520-1040 51-AB-CW 2-3/8” $29.76

Residential Wrap-Around Door ReinforcersFor deadbolts or door locks with 2-1/8” bore.

FOR 1-3/4” DOORSORDER # ITEM # BACKSET PRICE

520-1045 61-S-CW 2-3/8” $17.82520-1050 61-AB-CW 2-3/8” $29.76520-1060 81-AB-CW 2-3/4” $34.26


520-5210 DJO E2000-S-CW $53.28

Wrap-Around Door Reinforcerfor Ilco E-Plex 2000• Stainless Steel finish• 2-3/4” backset• for 1-3/4” Door Thickness• Dimensions 5” x 14”


227-1060 DJO 5K-S-CW $23.04227-1140 DJO 9K-S-CW $33.60

Wrap-Around Door Reinforcerfor BEST 93K, 73K Series and Sargent 6500 Series• Stainless Steel (630) finish• 2-3/4” backset• for 1-3/4” Door Thickness5K: 4-3/4” x 5-1/2” 9K: 4-3/4” x 9”

S: US32D PB: Polished Brass


520-5196 DJO 17-S-CW $47.04


520-5199 DJO 17-PB-CW $51.42


520-5200 DJO 27-S-CW $53.28

17-S-CW

81-S-2 Wrap-Around Door ReinforcerFor Schlage Rhodes, Arrow Sierra, Corbin Russwin 800, Sargent 10, Yale 5400N• 2-3/4” Backset, 1-3/4” Door Thickness• Overall Size: 4-3/4” x 4-1/2”


520-0081 DJO 81-S-2-CW $23.04


227-1080 DJO 26AD-CW AD200/250/300/400-CY

$67.32

227-1070 DJO 26CO-CW CO-100/200/250-CY

$67.32

Door Reinforcer for Schlage AD &Schlage CO Series• For 1-3/4” thick doors• 2-3/4” Backset, Dimensions 5” x 16”




Section 12 - 554

MIS

C. N

ON

-LO

CKIN

G H

ARD

WA

RE

INSTALL-A-LOCK Door Reinforcerfor Deadbolt & Key-in-Knob LocksAll units solid 22 gauge brass, bronze, or stain-less steel, fit square of bevel edge doors. Edge prep recessed to accept all standard latches 1" or 1-1/8" wide x 2-1/4" high. Latch mounting holes 1-5/8" on center & tapped to accept 8-32 machine screws (furnished). For installing cylindrical door locks with 2” or 2-1/8” bore. (Strike included).S: Stainless Steel AB: Antique Brass PB: Polished Brass


520-2005 2006-PBV US3 $21.01

Traditional Door Reinforcer• For all locks with 2-1/8” bore • For 1-3/4” thick doors• 2-3/8” Backset, Dimensions 4” x 6”

ORDER # ITEM # FOR DOORS PRICE

520-0102 DJO 10-S-FE 1-3/8” $10.74520-0108 DJO 10-PB-FE 1-3/8” $11.70520-0202 DJO 20-S-FE 1-3/4” $10.74520-0208 DJO 20-PB-FE 1-3/4” $11.70

UNI-FORCE Edge GuardsDoor reinforcement for dead bolt & key in knob locks


520-0985 DJO 14-2-S-CW $51.60

Door Reinforcer for Simplex 1000 & Alarm Lock Trilogy• Converts to key-in-knob lock• 2-1/8” Bore, 4-1/4” from bottom, for lever• For 1-3/4” thick doors• 2-3/4” Backset, Dimensions 5” x 14”

FOR 1-3/4” DOORS520-0022 DJO 2-S-CW 2-3/8” 4” x 9” $30.12520-0024 DJO 2-AB-CW 2-3/8” 4” x 9” $47.40520-0028 DJO 2-PB-CW 2-3/8” 4” x 9” $31.20520-0042 DJO 4-S-CW 2-3/4” 4-1/2” x 9” $30.12520-0044 DJO 4-AB-CW 2-3/4” 4-1/2” x 9” $47.40520-0048 DJO 4-PB-CW 2-3/4” 4-1/2” x 9” $31.20

FOR 1-3/8” DOORSORDER # ITEM # BACKSET DIM. PRICE

520-0012 DJO 1-S-CW 2-3/8” 4” x 9” $30.24520-0018 DJO 1-PB-CW 2-3/8” 4” x 9” $31.32520-0032 DJO 3-S-CW 2-3/4” 4” x 9” $30.12520-0038 DJO 3-PB-CW 2-3/4” 4” x 9” $31.20

FOR SCHLAGE RHODES & ARROW SIERRA LOCKSwith holes520-0045 DJO 4-PB-2-CW 2-3/4” 4-3/4” x 9” $34.68520-0046 DJO 4-S-2-CW 2-3/4” 4-3/4” x 9” $33.60

Door Reinforcer for Cylindrical Deadbolts with 1-1/2” boreFor 1-3/4” doorsORDER # ITEM # BACKSET DIMENSIONS PRICE

520-0062 DJO 6-S-CW 2-3/8” 4” x 4-1/2” $19.20520-0082 DJO 8-S-CW 2-3/4” 4-1/4” x 4-1/2” $19.20

Door Reinforcer for Cylindrical Deadbolts with 2-1/8” boreFOR 1-3/8” DOORSORDER # ITEM # BACKSET DIM. PRICE

520-0512 DJO 51-S-CW 2-3/8” 4” x 4-1/2” $19.20520-0518 DJO 51-PB-CW 2-3/8” 4” x 4-1/2” $19.80520-0712 DJO 71-S-CW 2-3/4” 4-1/4” x 4-1/2” $19.20

FOR 1-3/4” DOORS520-0612 DJO 61-S-CW 2-3/8” 4” x 4-1/2” $19.20520-0614 DJO 61-AB-CW 2-3/8” 4” x 4-1/2” $16.09520-0618 DJO 61-PB-CW 2-3/8” 4” x 4-1/2” $19.80520-0812 DJO 81-S-CW 2-3/4” 4-1/4” x 4-1/2” $19.20520-0818 DJO 81-PB-CW 2-3/4” 4-1/4” x 4-1/2” $19.80

Wrap-Around Door Reinforcer for Simplex 1000 & 5000 Series Locks2-1/8” Bore, 4-1/4” from Bottom, 2-3/4” Backset, for 1-3/4” doors. Size: 5” x 14”14” for Mortise Conversion.520-1026 DJO 15-S-CW $53.28520-1005 DJO 15-AB-CW $84.90520-1003 DJO 15-PB-CW $58.32




MISC. N

ON

-LOCK

ING

HA

RDW

ARE

ST-214 Replacement Lip StrikeFull lip. For use on entry or interior doors, adjustable tang. Replacement strike for Kwikset, Schlage, Weiser, and most other brands. 18 gauge, 2-1/4” x 1-1/4”

Wrap-Around Blank ChannelsMounting holes only


520-0702 DJO 70-S-CW4-1/4” x 4-1/2”

1-3/8” $19.20

520-0402 DJO 40-S-CW4-1/4” x 9”

1-3/4” $30.12

520-0802 DJO 80-S-CW4-1/4” x 4-1/2”

1-3/4” $19.20

for Mortise Locks1-1/4” x 8” Face Plate, 2-3/4” BacksetDimensions 5” x 12”


520-5042 DJO 504-S-CW 1-3/4” $39.48

Wrap-Around Door Reinforcer for Cyl. Door Lock & Deadbolt-in-One2-1/8” top & bottom bores, 2-3/4” backset,3-5/8” between centers, 4-1/4” x 9” dim.520-4812 DJO 481-S-CW $30.12

Wrap-Around Door Reinforcer for Kaba Simplex 5000 Locks2-3/4” backset, for 1-3/4 doors, 5” x 15”

227-1090 DJO 5000-S-CW $53.28


520-7000 DJO ST-214-605 $3.00

FL-212W4 High Security 12” Strike12” x 1-3/4” double strike for 1-3/4” doors. Works with 3-5/8” & 4” centered locksets.


110-3000 DJO FL-212W4-BP $26.16

ST-261 Strikes for Install-A-Lock Reinforcer4-7/8” x 1-1/4” lip strike (ASA cutout)


520-0213 DJO ST-261-BP $8.40520-0215 DJO ST-261-SL $8.40

90 Commercial Kick PlatesFurnished with grain running horizontally to door, .050 gauge metal, 10” x 34”695-0001 DJO 90-630 $51.00

40

70


695-0040 DJO 71 628 Aluminum $12.24227-1105 DJO 71 630 Stainless St. $16.92695-0041 DJO 71 605 Brass $31.80


695-0400 DJO 7110 628 Alum $30.24227-1110 DJO 7110 630 SS $77.04695-0401 DJO 7110 605 Brass $65.76

71 Push PlatesDimensions: 4” x 16”

7110 Pull PlatesDimensions: 4” x 16”

CFC-71 with 1-1/4” Single Hole227-1145 DJO CFC-71 628 Alum $18.48227-1146 DJO CFC-71 630 SS $26.64

CFC-7110 with 1-1/4” Single Hole227-1145 DJO CFC-71 628 Alum $44.28227-1146 DJO CFC-71 630 SS $64.92

BX-2-SDS Heavy Duty Security Box StrikeSupplied with 3” screws for extra security; 13 gauge (.095); 4-7/8” x 1-1/4” (ASA cutout)


520-7475 DJO BX-2-SDS-626 $14.28




Section 12 - 556

MIS

C. N

ON

-LO

CKIN

G H

ARD

WA

RE

GKL Hinge Repair Screws

9450 Adjust-A-StrikeAdjustable T-Strike; 2-3/4” x 1-1/4”13 gauge (.095)

2-3/4” x 1-1/4” Lip Strike520-4503 DJO 9450-BP-US3 $7.80520-4505 DJO 9450-CP-US26D $7.80

4-7/8” x 1-1/4” Lip Strike520-4523 DJO 9454-BP-US3 $9.24

1450 Floor Door StopCast brass, heavy duty door stop mounts to floor. 2-1/8” Height, Base measures 2-5/8” x 1-5/8”. Includes MS, expansion shield and lead anchor fasteners. ANSI L12131.

520-9214 DJO 1450-626 $26.10520-9215 DJO 1450-605 $22.02

1440 Floor Dome StopSolid brass dome door stops, mount to floor. SMS and plastic anchor fasteners. “Low Dome” 1” high. 1/8” x 1-3/4” base. ANSI L12141520-9200 DJO 1440-626 $7.20520-9201 DJO 1440-605 $7.32

1455 Kick Down Door HolderMounts directly to door. 3 hole mounting.Includes mounting screws. 4” Projection,zinc die-cast. ANSI L11382520-9220 DJO 1455-CP $12.72520-9226 DJO 1455-BP $12.72

Metal Hinge Repair Screws (100/pk)Self-drilling, self-tapping No.14 screws with No.12 Phillips undercut flat head. Replace stripped out hinge, strike plate and door closer screws in steel doors and frames.


335-0007 GKL HSP100M $75.60

EL-86 Mortise Conversion PlateConverts Mortise to Electronic LockDimensions: 1-1/4” x 8”Prime coat, 1/4” gauge, steel


227-0375 DJO EL-86-PC $13.44

CV-86 Mortise Conversion PlateConverts 86 cut-out to 161Dimensions: 1-1/4” x 8”Prime coat, 1/4” gauge, steel227-0100 DJO CV-86 $12.84

1412 Cast Wall Bumper#10 x 1-1/4” SMS. Includes plastic anchor and plastic drywall anchor.2-1/2” Diameter. ANSI L12101.CONVEX, 1” PROJECTION520-9180 DJO 1412-626 $10..08

233-1000 DS1000 MB Black $63.50233-2000 DS1000 MG Charcoal Grey $63.50233-3000 DS1000 MB Brass Plastic $56.56

Door ViewersIdentify Visitors Seven Feet From Your Door in Your Room!FEATURES• Provides 132˚ of horizontal visibility• Projects a true image of visitors• Easy to Install in metal or wood doors• Made of AluminumAPPLICATIONSHome, Apartments, Condos, Offices, Hotels,Restaurants, Retail Stores, Banks, Hospitals & more!

DOORSCOPE

43 Arm PullSurface Applied with Thru-Bolts IncludedFinish: Satin Stainless Steel 630Width: 1-5/8”, Projection: 4.25”Clearance: 3-7/8”

48 Foot PullSurface Applied with Thru-Bolts IncludedFinish: Satin Stainless Steel 630Width: 7”, Projection: 3.25”CTC: 6”, Clearance: 4-5/8”

520-9287 DJO 43-630 $83.40

520-9286 DJO 48-630 $69.78




MISC. N

ON

-LOCK

ING

HA

RDW

ARE

Wood Hinge Repair Screws (100/pk)A No.12 Phillips under cut head with a No.14 oversized body. Replace stripped out hinge and strike plate screws in wood doors and frames.


335-0008 GKL HSP100W $75.60

DorGard III™ resists pry bar spreading, jamb ripping, and bolt sawing in narrow stile aluminum doors. Cast in one piece, with ribs on the back for added strength, the latch plate has two pins that rest in holes drilled into the door jamb. This innovative pin feature adds another level of security to the door by linking the door and the jamb together. The DG3 can be used with any cylinders from 15/16" to 1-3/8" (2.38 x 3.50cm) in length. Non-handed. Mounting hardware and illustrated installation instruc-tions are included.

HPC/Scotsman High Security Dorgard III™


360-0125 HPC DG3-APS-10 $313.90

OVDG Offset Guard Platesfor Outswinging DoorsUsed on vestibule doors with projecting door casings (for doors that are not flush with the frame). Made of cold rolled steel. 14” overall length extends 3” beyond the average lock face, protecting against unauthorized, forcible entry.

ORDER # ITEM # OFFSET PRICE

360-0264 HPC OVDG-11 1/4” $30.40360-0265 HPC OVDG-12 3/8” $30.40360-0266 HPC OVDG-13 7/16” $30.40360-0267 HPC OVDG-14 9/16” $30.40

VDG-10 Heavy Duty Guard Platefor Outswinging Doors14” long and made from 2 pieces of 16 gauge cold rolled steel, this guard plate offers maximum resistance to prying and forcing. Mounts with 2 carriage bolts and is anchored with a nut and cap nut on the inside. Four wood screws (included).


360-0508 HPC VDG-10 $32.82

ODG-6 Guard Platefor Outswinging DoorsThe ODG-6 is screwed directly onto the edge of the door and made of heavy gauge cold rolled steel with zinc plating. Guard plates come complete with all necessary hardware.


360-0260 HPC ODG-6 $23.56

ESP Ames Door Lock SupportFirmly anchor deadbolts & knob locks in hollow metal doors. 1-3/4” wide. Flexible and adjustable. For locks requiring 2-1/8”, 1-5/8” or 1-1/2” cross bores.ORDER # ITEM # PRICE

245-0001 ESP ODDA1346 $11.66

750S Door Bottom SweepsClear anodized Aluminum with neoprene insert. 1/4” wide. 1/2” strip height.ORDER # ITEM # PRICE

365-0070 HAG 750SN 36” $16.02365-0800 HAG 750SN 48” $21.60




Section 12 - 558

MIS

C. N

ON

-LO

CKIN

G H

ARD

WA

RE

FB458 Manual Flush BoltStandard Rod Length: 12”, measured from the center of the flush bolt body to the bolt tip.Bolt tip: 1/2” DiameterBolt throw: 3/4” with 7/8” vertical adjustmentBolt backset: 3/4”ORDER # ITEM # PRICE

405-0050 IVES FB458 US26D $30.36

2A92 Elbow Cabinet CatchMeets ANSI/BHMA A156.9 B33023Finish: Aluminum clear coatPlate Dimensions: 1-3/8” H x 5/8” W Strike Dimensions: 13/16” H x 5/8” W


405-0055 IVES 2A92 A92 $5.16

Mighty-Mite® Heavy Duty Magnetic CatchesSelf-aligning magnets insure maximum pull. Can be sur-face mounted or mortised. Aluminum case. Packed with sheet metal screws, 2 short strikes and 1 long strike.

326 Dual Double Pole Magnetic CatchDual double pole, 9 lbs. Load Capacity

327 Dual Triple Pole Magnetic CatchDual triple pole, 14 lbs. Load Capacity


405-0065 IVES 326A92 $11.04


405-0070 IVES 327A92 $18.84

8400 Protection Kick PlatesSatin stainless steel. Mounting screw pack furnished


405-0125 IVES 8400 8” x 34” US32D $45.68405-0130 IVES 8400 10” x 34” US32D $57.12

8300 Pull PlatesMeets ANSI A156.6 for J301 Materials, plates are prepped with 2 3/8” holes for pull machining


405-0145 IVES 8202-8 4” x 16” US32D8” CTR to CTR

$70.80

405-0150 IVES 8203-0 4” x 16” US2810” CTR to CTR

$107.52

8200 Push PlatesMeets ANSI A156.6 for J301 MaterialsORDER # ITEM # PRICE

405-0135 IVES 8200 4” x 16” US32D $19.56405-0140 IVES 8200 4” x 16” US28 $12.96

349 Ball CatchDual adjustment for door clearance and holding strength. Designed for use where strike is mounted in jamb. Free rolling ball for smooth, positive and trouble-free action. Adjustable threaded barrel compensates for various door clearances. Adjustable spring tension. Made from wrought brass.


405-0075 IVES 349B26D $19.44

RL36 Roller LatchMaximum projection 5/16” allows for variance in the door clearance. Fits cylindrical lock cutout. Nylon roller, non-handed


405-0060 IVES R36 US32D $66.60

SR64 Door SilencerTamper-proof silencer for use on metalframes featuring pneumatic design that forms an air pocket to absorb shock and reduce noise of door closing.


405-0025 IVES SR64 (100/bag) $32.40




MISC. N

ON

-LOCK

ING

HA

RDW

ARE

060 3” Flexible Door StopUtilizes heavy gauge spring to maintain rigid protections-Simple to install - only a screwdriver required• Packed disassembled for quick installation• With fastener for wood applications• White rubber tip


405-0110 IVES 060F15 US15 $1.56

Floor Dome Door StopsHeavy-duty, Packed with wood screw and plastic anchor. Replaceable gray, non-marring rubber bumper.FS436 for doors without threshold Overall Height: 1”FS438 for doors with threshold or undercut doors Overall Height: 1-3/8”

FS452 Kick Down Door HolderReplaceable non-marring rubber shoes have corrugated bottoms to provide secure grip. Packed with sheet metal screws. FS452-4 has a door-to-floor clearance of 2” or less.


405-0005 IVES FS436 US26D $5.76405-0080 IVES FS438 US26D $8.04


405-0085 IVES FS452-4 US26D $44.16

Hinge Pin Door Stops69: Positive slip proof adjustment• Non-marring rubbertips• Removable bushings accommodate

1/4” to 5/16” diameter hinge pins• Door opening adjustments from 70

to 100 degrees

70: Designed for narrow trim installation• High quality rubber bumpers• Removable bushings accommodate

1/4”to 5/16” diameter hinge pins• Door opening adjustments from 85

to 125 degrees


405-0100 IVES 69F15 US15 $5.76405-0095 IVES 70A92 A92 $3.00405-0120 IVES 70A15 US15 $3.48

407CCV Concave Wall StopConcave rubber bumper avoids damage to locks with projecting buttons, packed with screw and drywall anchor.


405-0001 IVES WS407CCV US32D $3.36

3-1/8” Base Door StopProjection: 3-3/16” on aluminum unitsBase Diameter: 7/8”, Tip Diameter: 5/8”


405-0090 IVES 61A92 A92 $4.44405-0115 IVES 61A15 US15 $4.44


405-0105 IVES 63F619E US15 $1.44

63 Flexible Door StopFlexible wrought steel base utilizes heavy gauge spring to maintain rigid protections• Simple to install - only a screwdriver required• Packed disassembled for quick installation• With fastener for wood applications• White rubber tip




Section 12 - 560

MIS

C. N

ON

-LO

CKIN

G H

ARD

WA

RE

The K-17 Security Guide & Bolt replaces the flimsy plastic guides and flush bolts provided by many manufacturers with quality steel. With a relatively simple installation, you eliminate the possibility of a burglar breaking in by merely snapping the plastic bolts.

Made of steel, cadmium plated to prevent rust, the K-17 works with the Builders Brass Works & Slide-Co flush bolts.

K-17 Security Guide & Bolt

• Use the short side to replace the BBWGuide.

• Use the long side to replace the Slide-Co & W&F Guides.

• Replaces plastic pin with steel bolt. • Self-Tapping screws included.


435-0140 KEE K-17 $25.56

K12 Protect-A-Lok Knob ProtectorMade from Lexan polycarbonate, virtually indestructible. Designed for use in areas where locks may have a chance of getting hit by carts, forklifts or vehicles. Can be used with levers, knobs, panic hardware and more. Install in minutes, guaranteed for 5 years.

435-0012 KEE K12 Cream $50.51

Electric Strike Boxes

BXES4

BXES2

BXES3

BXES1K-BXES1 For installing Eff 11BS, Rofu 1106 & Trine 005 electric strikes. Dimensions: 3-3/4” H x 3-1/2” L x 1-9/16” WK-BXES2 For installing Eff3314, 4114/4314, 5113/5314 & 7114; Rofu 1402, 1702 & 3402 electric strikesDimensions: 5-1/16” H x 2-3/8” L x 1-3/4” WK-BXES3 For the Adams Rite 7100, 7101, 7104, 7800, 7820, 7830, 7840 & 7860 and HES 5000 electric strikes.Dimensions: 6-7/16” H x 2-3/8” L x 1-3/4” W.K-BXES4 For Von Duprin 3140 & 6211; Folger Adams 712 & 712-75 electric strikes. Dimensions: 6-7/16” H x 2-3/8” L x 1-3/4” W.


435-0060 KEE K-BXES1 $43.60435-0065 KEE K-BXES2 $43.60435-0070 KEE K-BXES3A $43.60435-0075 KEE K-BXES4 $43.60

214: for Exterior DoorsTrim plates 10-1/2” x 3-1/2"Latch plate is 8 x 1-1/8"

Modernization KitsAn economical way to replace old mortise locksets without filling in holes left by removal of old lock. Consists of a latch and strike plate and front and back trim plates.


455-2143 KWI 214-US3 $95.55

455-2153 KWI 215-US3 $66.92

215: for Interior DoorsTrim plates 7-1/4” x 3-11/32”Latch plate is 6” x 1”

Round RosettesInstalls on passage, privacy and dummy lever sets. Comes with easy-to-follow directions. Overall size: 4.896” H x 2.710” W. Diameter: 3-13/16”. Trim only - must purchase knob or lever separately.


455-2930 KWI 293-CP 26D $25.90455-2933 KWI 293-CP US3 $24.50455-2935 KWI 293-CP US5 $25.80

FOR GATE BOXES, SEE SECTION 7




MISC. N

ON

-LOCK

ING

HA

RDW

ARE

AlumaGuardForms a shield that will protect both the latch area from attack and the lock cylinder from wrenching. Mounting is easy with one carriage bolt in the top and a drive rivet in the bottom.

ORDER # ITEM # FINISH PRICE527-0005 MAJ AG5-A Aluminum $20.50527-0006 MAJ AG5-D Duranodic $20.50

AG-1 for Outswinging Offset DoorsStandard "Aluma-Guard" for use on outswinging offset hung aluminum doors. Complete with all mounting hardware and directions. 6-7/8" high x 4-1/8" wide.ORDER # ITEM # FINISH PRICE527-0120 MAJ AG1-A Aluminum $46.50527-0125 MAJ AG1-D Duranodic $46.50

AG-5 for Framed Glass Storefront DoorsFor use on outswinging offset hung aluminum doors. Formed from cold rolled steel. 6-1/2” high, 3-1/2” wide & 7/64” thick. Can be installed with the lock still in the door.

STRIKEGARD Aluminum Door Jamb ReinforcerUsed to repair an aluminum door jamb that has been damaged due to a break-in or to reinforce a jamb as extra protection against forced entry. Easy installation by drilling six No. 20 holes in the door frame and using the steel pop rivets supplied with strike. 14 gauge cold rolled steel, 5/64" thick.

ORDER # ITEM # FINISH PRICE527-0260 MAJ SGA-1 Aluminum $30.70527-0265 MAJ SGD-1 Duranodic $30.70

Lock Mounting BracketsFor tubular latch or mortise lock in hollow metal doors. Comes with installation template. Heavy Duty. Cut out for center seam doors.Economy. No cut out. Zinc plated.

ORDER # ITEM # TYPE PRICE527-0240 LMB-01 Tubular Heavy Duty $15.80025-3000 LMB-11 Tubular Economy $14.50025-4000 LMB-12 Tubular Economy $15.50

LMB-01

LMB-11

Jamb Jacket Door Reinforcer• 24” Long Plate• Repairs and Covers Damaged Door Jambs• Adds reinforcement to undamaged doors• Covers standard 1/2" rabbeted jamb.• Recessed accommodate T-strike• Non-handed

ORDER # ITEM # THICKNESS PRICE

527-0230 MAJ JJL-134-24 1-3/4” $55.00527-0235 MAJ JJL-138-24 1-3/8” $55.00

Nylon Brush Seals• Synthetic polymer: Polyamide• Excellent abrasion resistance,

flexibility and memory• Moisture resistant• Retains insecticides well• Temperature range -70˚F to 160˚F• BHMA Certified to ANSI A156.22 performance

tests for Heat, Cold, Air Leakage, and Smoke Control in most common profiles as indicated by BHMA Certified symbol

• No effective against water penetration.

• Sheet metal screws included• A: Clear with gray brush

ORDER # ITEM # SIZE PR

610-0100 A626A 36” x 86” $88.39610-0105 A626A 72” x 86” $82.94610-0110 D608A 36” $26.10610-0115 D608A 48” $34.80610-0605 A605A 7” $33.60

Anodized Aluminum Neoprene Sweeps#6 x 3/4" stainless steel sheet metal screws furnished. Screw holes are slot-ted for adjustment.

610-0065 NGP 200NA 36” $18.54610-0070 NGP 200NA 48” $24.72




Section 12 - 562

MIS

C. N

ON

-LO

CKIN

G H

ARD

WA

RE

160V Mill Aluminum Vinyl Perimeter Seal• Synthetic polymer: Polyamide• Economical• Moisture resistant• Flame resistant• Temperature range 0˚F to 140˚F• Plasticizers evaporate with age and

exposure to UV, Cold, heat causing hardening, loss of memory, loss of resilience, cracking, and crazing

• #6 x 3/4" stainless steel sheet metal screws furnished.• Screw holes are slotted for adjustment

ORDER # ITEM # SIZE PRICE610-0080 NGP 160V 36” x 86” $38.88

Silicone Bulb Fire & Smoke SealsEdge sealing system, category "G" for 20 min. rated category B wood doors perimeter application up to: single swing 4'x8', pairs 8'x8'• Up to 3 hours steel fire doors• Up to 1-1/2 hours wood fire doors• Meets requirements of ROHS Directive 202/95/EC• Self Adhesive, "C": Charcoal color

16A Anodized Aluminum Drip Strip• Aluminum alloy 6063, T5 temper drip strip• 2-1/2” wide x 1-1/2” tall• BHMA certified to ANSI/BHMA A156.22 performance tests for heat and cold• #6 x 3/4” stainless steel SMS furnished• Screw holes slotted for adjustment

ORDER # ITEM # SIZE PRICE610-0075 NGP 16A 40” $28.80

ORDER # ITEM # SIZE PRICE

610-0095 5050C-20 20’ Roll $51.60

Aluminum Saddle Thresholds


610-0005 NGP 424 36” $33.30610-0010 NGP 424 48” $38.88610-0015 NGP 424 72” $57.60

• Aluminum alloy 6063, T5 temper• 4” wide x 1/2” tall• Fluted top• Typical wall thickness .125”• Weight: .61 lbs./ft.• #10 x 1-1/2” FH zinc plated wood

screws included• Mill finish

• ADA Compliant• ANSI/BHMA

Certified A156.21-2006

VENTURA , CA USAPH. 800.283.9988

MEMPHIS, TN USAPH. 800.824.3018

VANCOUVER, BC CANADAPH. 877.535.7888

TORONTO, ON CANADAPH. 866.243.9816

C (Clear Anodized) • D (Dark Bronze Anodized) • G (Gold Anodized) • SP (Galvannealed Steel) • SS (Stainless Steel) Special finishes available upon request

ASTRAGALS AND MEETING STILES

AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see General Information section for finish chart)

• Automatic security astragal for outswing pairs of wood and metal doors.

• Discourages manipulation of panic-type hardware.

• Astragal is held flush against other door by 1/2" thick cam (cam and mounting screws included).

• Anodized aluminum with vinyl seal and stainless steel operating spring.

• Either door may be active without requiring a coordinator.

• Only available in 86" and 96" lengths. Parts can be trimmed 12" maximum from each end.

• Should be mounted prior to attaching panic hardware to eliminate the prob-lem of interference.

• Must be installed on the inside of a pair of outswing doors.

378_AVAILABLE FINISHES:C, D, G

Security Astragal

• For use on single outswing wood or metal doors.

• Covers gap between the door and jamb for the full door height, preventing prying and manipulation.

• Excellent for classroom doors opening onto exterior walkways (specified and approved by major school districts).

• 3572SP supplied drilled 12” on center with 1/4” holes.

• 3572SPND (“no drill”) supplied undrilled.

• Thru-bolts are included when drilled only.

Offset Security Bar

3572_3572_NDAVAILABLE FINISHES:SP, SS (#4 Finish & #4 Edge)

AVAILABLE LENGTHS:80". 84" and 96"

80 AM-8

ASTR

AGAL

S AN

D M

EETI

NG

STI

LES

10 GAUGE

3(4.8)16

3572PP73572PP7NDAVAILABLE FINISHES:PP (Prime Painted)

AVAILABLE LENGTHS:84"

7 GAUGE

3572SP 80” Offset Security BarFor use on single outswing wood or metal fire doors to maintain the requirements of NFPA 80. Covers gap between the door and jamb for the full door height, preventing prying and manipulation. 80” galvan-nealed steel.


332-0010 PEM 3572SP80 $226.20

S-LineANSI Strikes1-1/4” x 4-7/8”


845-5163 S-5164-US3 $5.84845-5164 S-5164-26D $4.00




MISC. N

ON

-LOCK

ING

HA

RDW

ARE

181_T Latching Panic Saddle Threshold

A - Mill Finish Aluminum with Black Thermo Seal insert


332-0020 PEM 181AT Alum $54.43

3’ length5” width x 1” height

ELP-200, 210, 220 Latch Protector for Center Rose

• Protect the latch or deadbolt• For out-opening doors• For all backsets, deadbolts, and key-in-knob locks• Notched at the center for a 3” or smaller rose setting.• Hardware included.

Adapter Plates Cover up wood damage, resize holes and reinforce locking systems with a 2-3/4” steel Bore


520-2130 PRO EAP-110-C $12.34/cd520-2135 PRO EAP-110-B $9.10/cd


684-2035 ELP-200-AL 6” $29.02684-2040 ELP-210-B 7” $163.96684-2045 ELP-210-DU 7” $27.74684-2050 ELP-210-S 7” $41.22684-2055 ELP-220-AL 11” $31.50684-2060 ELP-220-B 11” $74.66684-2065 ELP-220-DU 11” $31.40684-2070 ELP-220-S 11” $46.56

ELP-200: 6” Center Rose (6” x 1-13/16”)ELP-210: 7” Center Rose ELP-220: 11” Center Rose

ELP-200 ELP-210 ELP-220

ELP-100, 110 Latch Protectors • For in-swinging doors• Deters spreading the door from the frame• All backsets, deadbolts and key-in-knobs locksets

ELP-100: 7" Interlocking (7" x 5/8")ELP-110: 12" Interlocking (12" x 5/8")


684-2000 ELP-100-B 7” $32.00684-2005 ELP-100-C 7” $32.00684-2010 ELP-100-DU 7” $32.00684-2015 ELP-110-B 12” $34.24684-2020 ELP-110-C 12” $34.24

12” narrow stile steel latch protector de-signed to protect and obstruct access to the latch or deadbolt of outswinging doors. Reversible for left or right-handed doors. Includes hardware.• Size: 12” x 2-5/8” in.• For use on out-opening narrow stile or storefront doors• Compatible with backsets, deadbolts, and locksets• Residential, commercial and industrial use

ELP-310 Narrow StileDoor Latch Protector


684-2135 ELP-310-AL $34.80684-2140 ELP-310-DU $34.80




Section 12 - 564

MIS

C. N

ON

-LO

CKIN

G H

ARD

WA

RE


684-2095 ELP-240-DU $47.52684-2100 ELP-240-S $59.72

ELP-240-1 with 1 PinTop onlyORDER # ITEM # PRICE

684-2075 ELP-240-1-DU $51.22684-2080 ELP-240-1-S $43.08

13”10¼”

Spacer

ELP-240 13” Latch Protectors• Accommodates a wide variety of locksets• Includes spacers to adjust depth between door and jamb• For out-opening doors

ELP-240

13”10¼”

Spacer

Anti-Spread Pin

13”10¼”

Spacer

Anti-Spread Pin

Anti-Spread Pin

ELP-240

ELP-240-1 ELP-240-2

ELP-240-2 with 2 PinsTop & bottom pinsORDER # ITEM # PRICE

684-2085 ELP-240-2-DU $57.22684-2090 ELP-240-2-S $69.72

ELP-250 11” Latch Protectors• Accommodates a wide variety of locksets• Includes spacers to adjust depth between door and jamb• For out-opening doors

Spacer

ELP-250 ELP-250-1 ELP-250-2

Spacer Spacer


684-2125 ELP-250-DU $41.92684-2130 ELP-250-S $54.82

ELP-250

ELP-250-1 with 1 PinTop onlyORDER # ITEM # PRICE

684-2105 ELP-250-1-DU $45.92

ELP-240-2 with 2 PinsTop & bottom pinsORDER # ITEM # PRICE

684-2115 ELP-250-2-DU $51.92684-2120 ELP-250-2-S $64.82

ELP-120 T-Style Latch Protectors• Use on in and out opening doors• Resist tampering of bolt and latch• Size: 6" x 1-13/16"


684-2030 ELP-120-AL $25.06




MISC. N

ON

-LOCK

ING

HA

RDW

ARE

160o Degree Vision Door ViewerMachine from solid brass, with ground glass lens. Fits doors from 1-1/8” to 2-1/4” thick.


920-2310 PAR 05333 Brass $9.29920-2311 PAR 05333 15A Pewter $14.69


920-2320 PAR 05334 Brass $12.73920-2321 PAR 05334PCH Chrome $14.42

190o Degree Vision Door Viewer Four element lens system provides extra wide angle of view for greater security, and fits doors from 1 1/4” to 2” thick. Solid brass, 9/16” in diameter.


730-6585 4TB EN Thru Bolt Pack $9.48

Thru Bolt Pack

2-1/2" Adapter Ringfor 2-1/8" Door PrepORDER # ITEM # PRICE

740-0007 38-031 x 2-1/2” 626 $24.13740-0008 38-031 x 2-1/2” 605 $24.13

Concave Type Wall Door BumpersPressure Cast Zinc, individually polybagged with wood screws and raul plug. Chrome plated.

Low Profile Dome Floor Stop


875-0003 DS436 CMD $6.58


875-0002 GH-DS401-US26D $7.61

Pressure Cast Zinc, individually polybagged with wood screws and plastic anchors. Chrome plated.

STRIKE RITEStrike Rite Adjustable Strike Plate• ASA Strike | Fully Adjustable • Rotate set screw in or out to adjust • 100% Stainless Steel construction• No more double latching problems• Helps prevent broken dead latch bolts• Increases security with proper door latching


845-2050 STRIKE RITE-32D $41.00

Square Corner Strikefor ANSI preparation A115.2

Square corner (standard) Size: 2-3/4" x 1-1/8"


740-0014 10-001 $8.45

MIS

C. N

ON

-LO

CKIN

G H

ARD

WA

RE




Section 12 - 566

AP323E-18L-4-335 Adjustable PullTrimco’s AP300 Series Pulls are uniquely designed to make the world healthier, while being durable, flexible, and highly customizable.• Adjustable and configurable standoffs are

versatile for use across many different center-to-center configurations

• ADA compliant with 1-1/2” clearance• Standard CTC is OA less 6”• AP323 is an all aluminum pull with

no endcaps.

ORDER # ITEM # FINISH PRICE

890-0013 TRI AP323E-18L-4-335 Black $194.35890-0014 TRI AP323E-18L-4-628 Alum $169.00890-0015 TRI AP323G-18L-4-335 Black $221.65890-0016 TRI AP323G-18L-4-628 Alum $196.30

E: Thru-Bolt & Finish WasherG: Back-to-Back: Threaded Shoulder Bolt & Set Screws18L: 18” Length, Loose CTC4: 1-3/4” Door thickness

PG8125VV-4 Panic GuardProtect both latches and end caps of exit devices. Prevent damage to the lower latch of an exposed rod panic device from work carts, fork lifts and pallet jacks, as well as shield the foot area of wheel chair users from lower latch protrusion. Simple, sleek non-handed design installs over the lower latch bolt and easily installs with standard tools. Manu-factured from 18GA stainless steel, UL Listed.• ADA Compliant• Non-handed and easy installation• Mates with most manufacturers exit devices -

Corbin Russwin, Sargent, Yale, Monarch, Von Duprin, Adams Rite, etc.

PG8125VV-4: Universal Panic End Cap Guard, 4" Length


890-0019 TRI PG8125VV-4.630 $267.80

Fantom Fire Premium Magnetic Concealed DoorstopUnlike conventional doorstops today, the Fire Fantom Doorstop provides a concealed, trip hazard free doorstop solution for the residential, commercial and industrial sectors. Flush mounted pin alleviates trip hazards. When used on a door with a closer to meet fire rating specifications, the Fantom Fire doorstop has a specially designed face-mounted magnet housing which stops the door without holding it open.

APPLICATIONS

F: Fire-ratedORDER # ITEM # FINISH PRICE

890-0017 TRI FANTOM-F.626 Alum $93.60

• Multi-Family Housing• Hospitality• Behavioral Healthcare• Commercial & Industrial Buildings

• Nurseries & Pre-Schools• Manufacturing Facilities• Residential

New Products Now Available from - Southern Lock

Documents

Transcript of New Products Now Available from - Southern Lock