mandatory disclosure 2 - NITTTR Chandigarh
-
Upload
khangminh22 -
Category
Documents
-
view
0 -
download
0
Transcript of mandatory disclosure 2 - NITTTR Chandigarh
- - 1
PROFILE OF DIRECTOR/PRINCIPAL & EACH FACULTY WITH QUALIFICATIONS , TOTAL EXPERIENCE, AND DURATION OF EMPLOYMENT AT THE INSTITUTE CONCER NED
AS ON 31.01.2015 Profile of Director with qualifications, total expe rience, and duration of employment at the
institute concerned
1. Name Prof. (Dr.) MP Poonia
2. Designation Director
3. Date of Joining the
institution
20.07.2012
4. Educational
Qualification
BE (Hons.);
M.Tech. (Thermal),
Ph.D. (Thermal)
5. Work Experience
- Teaching 26 yrs.
- Research 10 yrs.
- Industry 01 yrs
- Others
(Administrative)
01 year as Dean, Planning &
Development, MNIT, Jaipur; 06
years as Principal, Govt. Engg.
College, Bikaner
6. Area of Specialization - I.C. Engines, Alternative Fuels, Computer Simulation
7. Subjects teaching at
Under Graduate Level
and Post Graduate
Level
At Graduate Level & Post Graduate Level: I.C. Engines, Gas, Dynamics, Refrigeration and Air Conditioning, Renewable Energy Sources
8. Research guidance
Master’s 05
Ph.D. 03
(04 ongoing) .
No. of papers Published in
- National Journals - 04
- International Journals - 35
- Conferences - 32
9. Projects Carried out - Four projects sponsored by AICTE, MHRD & Govt. of
Rajasthan; one ongoing sponsored by DST, Delhi
10. Patents -
11. Technology Transfer -
12. Research Publications - 71
13. Number of Books
Published with Details
: Ten i) ‘Bio-Fuels’, Aavishkar Publishers Distributors, 2008 (co-author)
ii) ‘Objective Review in ICE and Automobile Engg.’, Standard
Publishers Distributors, 2007 (co-author).
iii) ‘Waste to Energy’, New Delhi: Indus Publishing Company, 2002
(co-author)
iv) ‘Production Systems Management’, Standard Publishers
Distributors, 2006 (co-author).
v) ‘Biodiesel Performance Evaluation of ICE’, The Book Planet,
Riddhi International, 2006 (co-author).
vi) ‘Physics for World and Society’, Jaipur: Surabji Publications, 2005
(co-author). vii) ‘Environmental Technologies for Sustainable Development’, New
Delhi: DK Publishers Distributors, 2004 (co-author)
viii) ‘Elements of Mechanical Engg.’, New Delhi: Standard Publishers
Distributors, 2004 (co-author).
ix) ‘Energy Technologies for Sustainable Development’, New Delhi:
DK Publishers Distributors (2004, co-author).
{From IIT, New Delhi}
- - 2
Profile of each faculty with qualifications, total experience, and duration of employment at the institute concerned AS ON 31.01.2015
1. Name Dr. PK Tulsi
2. Designation Dean, Research &
Development and
Professor & Head
3. Date of Joining the
institution
17.02.1986
4. Educational
Qualification
Ph.D. in Education,
M.Ed., MA
Psychology; &
Economics); PG
Diploma in Guidance
& Counselling
5. Work Experience
- Teaching 30 yrs.
- Research -.
- Industry -
- Others -
6. Area of Specialization
- Education Technology; Educational Management;
Educational Research; Educational Evaluation/
Measurement & Evaluation
7. Subjects teaching at
Under Graduate Level
and Post Graduate
Level
At Post Graduate Level: Education Technology, Media
Design & Development, Research Methodology; Performance
Evaluation and HRD & Training Methods, Education Project
Planning and Mgt.
8. Research guidance 12 M.Tech. Engg. Edu. Thesis completed; 03 MTE Thesis in
Progress; 03 Ph.D. thesis completed.
9. Projects Carried out 29 (as a Team member/Coordinator)
10. Patents -
11. Technology Transfer -
12. Research Publications 41 papers (eight in International conferences)
13. Number of Books
Published with Details
Contributed two chapters in ‘Aspects of Educational
Technology’ and seven units in Module on ‘Instructional
Planning & Delivery’.
- - 3
1. Name Dr. Shyam Sundar Pattnaik
2. Designation Professor
3. Date of Joining the
institution
26.04.2004
4. Educational
Qualification
M.Sc. Physics (Electronics
spl.), Ph.D. in Engineering
(Elex. & Telecom. Engg.)
5. Work Experience
- Teaching 25 yrs.
- Research 03 yrs. (Independent);
22 yrs. along with teaching
- Industry -
- Others 1½yrs. Post Doctoral
Research at University of
Utah, USA
6. Area of Specialisation
- Bio-Inspired Soft Computing, Antenna Design and Analysis, ICT
enabled learning & tools, Video Quality Enhancement and
Production, Open Source Tools
7. Subjects teaching at
Under Graduate Level
and Post Graduate
Level
At Graduate Level: Antenna & Radar Engineering; Communication
Engineering; Microwave Engineering; Electromagnetic theory; TV
Engineering; Signals & Systems; Circuits & Devices; Electronics & Materials;
Digital Signal Processing; Networks, Filters & Transmission lines; Artificial
Neural Networks; At Post Graduate Level: Digital Signal Processing;
Artificial Neural Networks; and Antenna & Radar Engg.
8. Research guidance
Master’s Thesis – 51
thesis completed;
Ph.D. thesis – 11 thesis
completed; 01 submitted
and 7 thesis in progress
No. of papers Published in
- National Journals 16 Nos.
- National Conférence 49 Nos.
- International Journals 62 Nos.
- International Conferences 97 Nos.
- Technical Reports 14 Nos.
9. Projects Carried out 07 (as a Team member/Coordinator)
10. Patents One invention disclosure
11. Technology Transfer Nil
12. Research Publications
238 Technical papers in various International Journals/ conferences
and National Journals/Conferences
13. Number of Books
Published with Details
Two in progress, Published 3 book chapter (International).
- - 4
1. Name Dr. JS Saini
2. Designation Dean, Extension &
Consultancy, and Professor
3. Date of Joining the
institution
21.12.1984
4. Educational
Qualification
MBA, Ph.D.
5. Work Experience
- Teaching/Research 34 yrs
- Industry/others 1 yr
6. Area of Specialization - Rural Development, Mgt. of Disabilities; Entrepreneurship Dev., Industry
Institute Interaction, Small Enterprise Mgt.
7. Subjects teaching at Under
Graduate Level
Post Graduate Level
- Nil
- Entrepreneurship, Small Enterprise Management; Technology Transfer
for Rural Development; - Training for Rural Youth, Tech. & Voc. Edu. For
PWDs
8. Research guidance Master’s
Ph.D. 01(in Progress)
-No of papers Published in
-National Journal 25; - International 11
-Conferences 58
9. Projects Carried out 11 (R&D)
10. Patents -
11. Technology Transfer
Guiding and facilitating transfer of appropriate technologies like vermi-
composting, sanitation technologies, herbal and medicinal plantation etc.; to
rural areas under the erstwhile Scheme of Community Polytechnics and the
revised scheme of Community Development through Polytechnics.
12. Research Publications - 106 papers; 15 Text Books; 10 Modules; 16 Reports
13. Number of Books
Published with Details
15 books: 1. Saini JS, ‘Entrepreneurship Development – Programmes & Practices’, Deep &
Deep Publications, New Delhi, 1996.
2. Rathore BS and Saini JS, Handbook on Entrepreneurship, Aapga Publication,
Panchkula, 1997.
3. Saini JS and Dhameja SK, Entrepreneurship and Small Business, Rawat
Publications, Jaipur, 2000
4. Rathore BS and Saini JS, Entrepreneurship Development-Theory and Practice,
Wheeler Publishing, New Delhi, 2001
5. Saini JS, Gurjar BR and Rathore BS, Enterprise Support System in India, Wheeler
Publishing, New Delhi, 2001
6. Sharma DD and Saini JS, Entrepreneurship in Hosiery Industry, Northern Book
Centre, New Delhi, 2001
7. Saini JS and Gurjar BR, Entrepreneurship and Education, Rawat Publications,
New Delhi-2001
8. Sharma DD and Saini JS, The Enterprise Edge-They Succeeded Like Success,
Abhishek Publications, Chandigarh, 2002.
9. Rathore BS, Saini JS, Gurjar BR, Entrepreneurial Opportunities in Modernising
Economy, Abhishek Publications, 2002.
10. Rathore BS and Saini JS, Entrepreneurship and Enterprise Support, Abhishek
Publications, Chandigarh, 2002
11. Rathore BS and Saini JS, Basics of Entrepreneurship, Abhishek Publications,
Chandigarh, 2002
12. Saini JS, Vocational & Technical Education for the Disabled, Abhishek
Publications, Chandigatrh, 2005.
13. Saini JS, Informal Sector - Employment and Productivity, Abhishek Publications,
Chandigarh, 2006.
14. Saini JS & Goyal Amit (Ed). Empowering the Disabled, Abhishek Publications,
Chandigarh, 2009.
15. Roy, UN and Saini, JS (Ed). People’s Empowerment and Sustainable Rural
Development-A Technological Approach, Rawat Publications, Jaipur, 2009.
- - 5
1. Name Dr. SBL Sachan
2. Designation Professor
3. Date of Joining the
institution
20.01.1981
4. Educational
Qualification
M. Sc. (Physics-Electronics),
PGDBIM; Ph.D. Physics-
Electronics)
5. Work Experience
- Teaching 24 yrs.
- Research 03 yrs.
- Industry 06 yrs.
- Others 11 yrs.
6. Area of Specialization
- Electronics & Communication Engg.; Instructional Material
(Non-print, i.e., video) development and equipment maintenance
7. Subjects teaching at
Under Graduate Level
Post Graduate Level
Television Engineering,
Audio & Basic Electronics
1. Optical Fibre Communication; Wireless & Mobile
Communication; Advanced Digital Communication
8. Research guidance
Master’s Nil
Ph.D. Nil
No. of papers Published in
-National Journal 10
-International Journal 01
-Conferences 12
9. Projects Carried out
Digital Audio System; DVD Video Archiving System
10. Patents
-
11. Technology Transfer -
12. Research Publications 24
13. Number of Books
Published with Details
-01 (“Non Traditional Approaches that worked’, CPSC, Manila (Co-
authored), May, 2001; ISBN 971-8557-68-7
- - 6
1. Name Dr. BS Pabla
2. Designation Professor
3. Date of Joining the
institution
28.10.1986
4. Educational
Qualification
BE (Mech. Engg.);
ME Mechanical
Engg., Ph. D (Mech.
Engg.)
5. Work Experience
- Teaching 27 yrs.
- Research 26 yrs.
- Industry 06 yrs.
- Others Nil
6. Area of Specialization - CAD/CAM
7. Subjects teaching at
Under Graduate Level
Post Graduate Level
Nil
CAD/CAM, Quality Control, Production Management.
8. Research guidance
Master’s 22
Ph.D. 04
No. of papers Published in
-National journals 08
-International journals 03
- Conferences 27
9. Projects Carried out - 06
10. Patents - Nil
11. Technology Transfer - Nil
12. Research Publications - 04
13. Number of Books
Published with Details
- 03 Books:
1. “CNC-Machines” co-author, New Age International
Publishers, (formerly Wiley Eastern Publishers),
New Delhi.
2. “Estimating and Costing for Metal Manufacturing
Industries” co-author, Mercel Dekker Inc. New York,
USA.
3. “Text book on “Production Engineering, Estimating
and Costing” co-author, M/s Konark Publishers, New
Delhi.
- - 7
1. Name Dr. SS Banwait
2. Designation Professor
3. Date of Joining the
institution
19.06.1991
4. Educational
Qualification
BE (Mech.);
M.Tech., Ph. D.
5. Work Experience
- Teaching 24 yrs.
- Research 24 yrs.
- Industry 04 yrs.
- Others -
6. Area of Specialization
- Manufacturing Technology
7. Subjects teaching at
Under Graduate Level
Post Graduate Level
Nil
At Postgraduate Level: CAD/CAM & Robotics, Design for
Consumer; Computer Programming, Computer Based
Production Management
8. Research guidance
Master’s 56
Ph.D. 08
No. of papers Published in
-National journals 06
-International journals 10
- Conferences 49
9. Projects Carried out MODROB Project; Bio-Energy Technology & Business
Solution for UK & India
10. Patents Nil
11. Technology Transfer Nil
12. Research Publications 07 papers in National Journal; 10 papers in International
Journal; and 49 papers in Conferences
13.
Number of Books
Published with Details
03 Books:
i. ‘Design & Manufacturing, Birla Publications, Delhi.
ii. Refrigerant & Psychometric Charts & Tables, Birla
Publications, Delhi.
iii. ISTE Continuing Education Module on “Engineering
Design”.
- - 8
1. Name Dr. (Mrs.) Swaym Prabha Bedi
2. Designation Professor
3. Date of Joining the
institution
25.04.1984
4. Educational
Qualification
M.Sc. (Chemistry), B.Ed., M.Ed.,
Ph.D. in Education
5. Work Experience
- Teaching 30yrs.
- Research 33 yrs.
- Industry -
- Others 05 yrs (including three years
administrative) 6. Area of Specialization
- Research Methodology, Measurement & Evaluation,
Educational Technology, Educational Management
and Curriculum Development
7. Subjects teaching at
Under Graduate Level
and Post Graduate
Level
At Post Graduate level: Performance Evaluation,
Educational Research, Media Design & Development,
Psychology of Adult Learning, HRD and Training
Methods, Project Planning & Management
8. Research guidance
13 ME thesis Completed and 4 in progress
02 Ph.D. thesis Completed and 01 in progress with PU,
Chandigarh
9. Projects Carried out
Testing Services,
- 20 Research Projects (Coordinated/Team Member)
- 19 Workshop Reports (Coordinated/Team Member)
- 03 Video Films
Team leader for designing 11 Skill Development
Programmes for Unorganized Sector
10. Patents -
11. Technology Transfer -
12. Research Publications 33 papers in Journals(06 in International Conferences)
13. Number of Books
Published with
Details
02 Books:
i) Monograph on “Profile of Polytechnics : A Conceptual
Framework”, TTTI, Publication (Jointly with
Kulkarni PD and Rajamony, N).
ii) Guidelines for Developing Learning Materials (co-
author), ISTE, May, 2000.
- - 9
1. Name Dr. A.B. Gupta
2. Designation Professor
2. Date of Joining 03.10.1986
3. Educational Qualification
B.E. (Mech.) M.E. (Mech.), Ph.D.(Mech.)
4. Work Experience
- Teaching 27 yrs.
- Research -
- Industry 01 yr.
- Others -
5. Area of Specialization - Curriculum Development, Manufacturing Technology
6. Subjects teaching at Under Graduate Level and Post Graduate Level
At undergraduate Level: Curriculum Development, At Post Graduate level: Manufacturing Technology, Welding Technology
7. Research guidance
Master’s Thesis 03
Ph.D.
No. of papers Published in
- National Journals 03
- International Journals 03
- Conferences 25
8. Projects Carried out i) Performance of electordes on EDM Machine;
ii) Flexibility in Industry
iii) Need analysis , curriculum development & evaluation
9. Patents -
10. Technology Transfer -
11. Research Publications 02
12. Number of Books Published with Details
02 Books:
i) Manufacturing Technology; New Age International Publishers, Delhi.
ii) A Practical Handbook for Mechanical Engineers, Galgotia Publishers, Delhi
- - 10
1. Name Dr. Suresh K Dhameja
2. Designation Professor
3. Date of Joining the
institution
10.11.1988
4. Educational Qualification BE, MTech. (Civil Engg.);
MBA; Ph.D. (Mgt.)
5. Work Experience
- Teaching 28 yrs.
- Research 28 yrs.
- Industry continuous interaction with
industry
- Others 3 years international
experience as Faculty
Consultant at CPSC for
Technician Education,
Manila, Philippines
6. Area of Specialisation
Entrepreneurship Development; Total Quality
Management (TQM) & ISO 9000 and Accreditation &
Certification; Industry Institute Interaction;
Environmental Engg.; Small Business Management
7. Subjects teaching at Under
Graduate Level
Post Graduate Level
Nil
At Postgraduate Level: Entrepreneurship
Development; Organisational Behaviour
8. Research guidance
Master’s 07
Ph.D. 01
No. of papers Published In
National Journals/Conferences 60
International Journal/Conferences 25
Conferences
9. Projects Carried out Consultancy and Research Projects for NPIU, World
Bank, ADBI, UNESCO, UNEVOC, Department of
Industries and S&T; APACC International Accreditation
and Certification of 6 TVET institutions in Philippines
and Bangladesh
10. Patents Nil
11. Technology Transfer Web based teaching and learning system in 20
countries of Asia Pacific Region
12. Research Publications More than 80 Research Papers and 10 Research Studies
13. Number of Books
Published with Details
20 Books Authored and Edited: i) Environmental Engg. And Management.’SK Kataria
& sons Publishers, Delhi, 1999 (author)
ii) Environmental Studies ‘SK Kataria & Sons
Publishers, Delhi, 2005 (author).
iii) Women Entrepreneurs, ‘Deep & deep Publications
Pvt. Ltd., New Delhi, 2001 (author)
iv) UNESCO-UNEVOC Book on Work, learning &
Sustainable Development: Opportunities and
Challenges, ‘Springer Publishers, 2008
v) CPSC/ADBI Publication on Developing e-learning
contents.
vi) TVET for the Ageing Society, ‘CPSC ISBN:978-971-
8557-86-0
- - 11
1. Name Dr. Sanjay Kumar Sharma
2. Designation Professor
3. Date of Joining the
institution
13.02.1986
4. Educational
Qualification
ME (Civil)
Ph.D. ( Engg. & Technology)
5. Work Experience
- Teaching 27 yrs.
- Research 27 yrs. along with teaching
- Industry/Others 01 yr
6. Area of Specialization
- Environmental Engineering, Building Repair, Retrofitting
and Rehabilitation, Irrigation & Hydraulics, Public
Health Engg.
7. Subjects teaching at
Under Graduate Level
and Post Graduate
Level
- At Post Graduate level: Environmental Engineering,
Construction of Hydraulic Structures, Building
Maintenance, Green Building & Services, Rural
Construction Technology
8. Research guidance
Master’s thesis 60
Ph.D. thesis 12 in progress
No. of papers Published In
National Journals/Conferences 50
International Journal/Conferences 20
Conferences
9. Projects Carried out -20 Consultancy & Research projects in areas of Repair and
Rehabilitation of structures and environmental engg.
10. Patents -
11. Technology Transfer -
12. Research Publications 70 papers in National Journal
13. Number of Books
Published with Details
05 Books:
i. Data Book in Hydraulics. Wiley Easter, New Delhi, 1995.
ii. Lab Manual in Environmental System under publication
iii. Building Repair and Maintenance Management, CBS
Publisher, New Delhi, 2007-08.
iv. ISTE manuals on Operation Construction and Maintenance
tube wells, Building maintenance (2 nos.)
v. ISTC Manual on Building Defects and Remedial Measures
(Part I and Part II).
vi. Emerging Trends in Civil Engg.
vii. Latest Techniques in Pollution Prevention & Control
- - 12
1 Name Dr. Hemant Sood
2. Designation Professor
3. Date of Joining the
institution
02.12.1988
4. Educational
Qualification
B.E. (Civil) Hons.,
M.E. (Highways);
Ph.D.
5. Work Experience
- Teaching 23 yrs.
- Research 10 yrs.
- Industry 1 ½yrs
6. Area of Specialization - Concrete Technology; Pavement Design
7. Subjects teaching at
Under Graduate Level
Post Graduate Level
Concrete Technology
Pavement Design
8. Research guidance
Master’s Thesis 24
Ph.D. 03 in progress
No of papers Published in
-National Journal - 09
-International Journal - 02
-Conferences - 09
-(National/internationals) - 08
9. Projects Carried out 100 (Consultancy)
10. Patents -
11. Technology Transfer -
12. Research Publications 28
13. Number of Books
Published with Details
i) Lab Manual on “Testing of Engg. Materials” by New Age
International, New Delhi.
ii) Lab. Manual on “Concrete Technology” by CBS Publishers, New
Delhi
iii) CEP package on “ Concrete Mix Design” by ISTE, N.Delhi
iv) Module on Design flexible pavement, NITTTR, Chandigarh
v) Module on “Floor, wall and ceiling finishes’ NITTTR,
Chandigarh
vi) Computer Software on “ConMD-2000”- Concrete Mix Design,
NITTTR, Chandigarh
vii) Computer Software on “ Design of Flexible Pavement", NITTTR,
Chandigarh
viii) Module on “Remote Sensing and its Applications”, NITTTR,
Chandigarh
ix) Module on “Special Concretes” NITTTR, Chandigarh
x) Developed eighteen (18) video films in the subject of Concrete
Technology and Pavement Construction, NITTTR, Chandigarh
xi) Module on ‘High Performance Concrete’ published by NITTTR,
Chandigarh
xii) Reader on ‘Bridge Bearings’ published by NITTTR, Chandigarh
xiii) Reader on ‘ Suspension Bridges’ published by NITTTR,
Chandigarh
xiv) Computer Software on ‘Concrete Mix Design’ by ACT Method
xv) Computer Software on ‘ Design of Flexible Pavement’ using
Mcleod and Triaxial method
- - 13
1. Name Dr. Sunil Dutt
2. Designation Professor
3. Date of Joining the
institution
25.11.1992
4. Educational
Qualification
M.Sc. (Hons.)
Chemistry; M.Ed.,
Ph.D. in Education
5. Work Experience
- Teaching 29 yrs.
- Research 27 yrs.
- Industry 2½ yrs.
- Others 10 yrs. (Administrative
and as well as CPIO)
6. Area of Specialization
- Educational Technology, Research Methodology, Measurement
& Evaluation, Educational Management
7. Subjects teaching at
Under Graduate Level
and Post Graduate
Level
At Undergraduate level: Educational Technology, Educational
Psychology, Teaching of Science; At Postgraduate level: Educational
Technology, Psychology of Adult Learning, Performance Evaluation,
Educational Research, Media Design and Development, Principles
of Management, Quantitative & Qualitative Evaluation, Project
Planning & Management, and HRD & Training Methods
8. Research guidance
Master’s 30
Ph.D. 28,
06 Ph.D. in Progress,
with Panjab University,
Chandigarh
No. of papers Published in
- National Journal - 38
- International Journal - 05
- Conferences - 19
9. Projects Carried out Testing Services (including admission and recruitment), 17 Research
Projects; (Coordinated/ Team member), 02 Video Films; 04 CAI
Packages; In addition, developed curriculum for TEN Skill
Development Programmes for Unorganized Sector; developed
curriculum for ‘Educational Technology’ and revised for ‘Learning &
Instruction’ for M.Tech. Engg. Education Programme.
10. Patents -
11. Technology Transfer -
12. Research Publications - 43 papers (38 in National Journals and 05 papers in
International Journals)
13. Number of Books
Published with Details
07 Books: • Learning Styles and Personality Types of Engineering Students,
Germany: LAP LAMBERT Academic Publishing, 2012; ISBN:978-3-
659-23245-9 (E-Book, co-author)
• Applied Aspects of Educational Technology, 2012; S Chand &
Company Ltd., New Delhi (Edited); one chapter
• Education & Open Learning in Global Society, 2007; Anmol
Publications Pvt. Ltd., New Delhi (Edited); one chapter
• Essentials of Educational Technology, 2006; Patiala: 21st Century
Publishers (co-author)
• Educational Technology, 1998, 1996; Chandigarh: Samir Publishers
(co-author)
• Teaching learning-A process approach, 1992, 1995; Chandigarh:
Samir Publishers (co-author)
• Guidelines for Developing Learning Materials (Co-author), ISTE,
May, 2000
- - 14
1. Name Dr. B.C. Choudhary
2. Designation Professor
3. Date of Joining the
institution
05.12.1994
4. Educational
Qualification
M. Phil, Ph.D.
(Physics)
5. Work Experience
- Teaching 18 yrs.
- Research 21 yrs.
- Industry -
- Others -
6. Area of Specialization - Applied Physics, Fibre Optics, Laser Technology, Radiation
Physics
7. Subjects teaching at
Under Graduate Level
and Post Graduate
Level
At Undergraduate Level: Optics; At Postgraduate level:
Optical Fiber Communication, Optoelectonics
8. Research guidance
Master’s 09
Ph.D. 01
No of papers Published in
- National Journal - 01
- International Journal - 36
- Conferences - 50
9. Projects Carried out 02
10. Patents -
11. Technology Transfer -
12. Research Publications 37 papers
13. Number of Books
Published with Details
-
- - 15
1. Name Dr. Rakesh K Wats
2. Designation Professor
3. Date of Joining the
institution
21.02.1992
4. Educational
Qualification
B.E., ME, Ph.D.
5. Work Experience
- Teaching 25 yrs.
- Research 25 yrs.
- Industry 02 yrs.
- Others -
6. Area of Specialization
- Civil Engineering (Hydraulics, Construction Planning &
Management), Quality Management, General Management
7. Subjects teaching at
Under Graduate Level
and Post Graduate
Level
At Postgraduate level: Construction Planning & Management
8. Research guidance
Master’s Nil
Ph.D. Nil
No of papers Published in
-National Journal - 09
-International Journal - 03
-Conferences - 26
9. Projects Carried out 36
10. Patents -
11. Technology Transfer -
12. Research Publications 27 Project Reports
13. Number of Books
Published with Details
03; Continuing Education Modules (AICTE-ISTE, New Delhi
Publications); Planning & Managing Continuing Education
Programmes in Industry & Training Institutes; Creating Total
Quality Culture in Organizations; Benchmarking for
Excellence-Guidelines for Indian Organizations
- - 16
1. Name Dr. (Mrs.) Maitreyee
Dutta
2. Designation Professor
3. Date of Joining the
institution
04.06.2002
4. Educational
Qualification
ME in Electronics;
Ph.D. (Engg. & Tech.)
5. Work Experience
- Teaching 16 yrs.
- Research 09 yrs.
- Industry -
- Others -
6. Area of Specialization
- Digital Signal Processing, Advanced Computer Architecture,
Data Warehousing and Mining, Digital Image Processing
7. Subjects teaching at
Under Graduate Level
and Post Graduate
Level
At Postgraduate level: Digital Signal Processing, Advanced
Computer Architecture, Data Warehousing, Software Testing
& Quality Management, Business Intelligence & Data Mining
8. Research guidance
Master’s 50
Ph.D. 01 completed
and 07 in Progress with
Panjab University,
Chandigarh
No of papers Published in
-National Journal - 03
-International Journal - 26
-Conferences - 46
9. Projects Carried out
03 completed; 02 projects in progress
10. Patents
-
11. Technology Transfer
-
12. Research Publications 75 papers
13. Number of Books
Published with Details
-
- - 17
1. Name Dr. SS Dhami
2. Designation Professor
3. Date of Joining the
institution
03.08.2004
4. Educational
Qualification
B.E. (Mech. Engg.),
M.E. (Mech. Engg.),
Ph.D. (Mech.
Engg.)
5. Work Experience
- Teaching 21 yrs.
- Research 19 yrs.
- Industry -
- Others -
6. Area of Specialization
Automation, Mechatronics, Measurement & Control,
Computer Programming
7. Subjects taught at
Under Graduate Level
Post Graduate Level
Servomechanisms & Automatic control, Mechanical
Measurements, CAD/CAM, Fundamentals of Computer
Programming (at P.E.C. Chandigarh)
Industrial Automation & Control, Industrial Instrumentation,
Materials for Manufacturing, Computer Programming &
Applications, Artificial Intelligence in Manufacturing
8. Research guidance
Master’s Thesis: 22
Ph.D. Thesis 04 in
progress
No. of papers published in
-National Journals, -01
-International Journals -04
-Conferences -20
9. Projects Carried out Setting up of CAD Laboratory under MODROBS (in PEC,
Chandigarh)
10. Patents -
11. Technology Transfer -
12. Research Publications 25 papers in journals and conferences;
13. Number of Books
Published with Details
-
- - 18
1. Name Dr. UN Roy
2. Designation Professor
3. Date of Joining the
institution
19.05.1995
4. Educational
Qualification
B.Sc. (Hons.), PGD
(in Rural Dev/Mgt.)
& Ph.D. (Rural
Dev.)
5. Work Experience
- Teaching 20 yrs.
- Research 10 yrs.
- Industry -
- Others 02 yrs.
6. Area of Specialization - Watershed Management; Organic Farming; Rural
Technologies; Sustainable Development and Disaster
Management
7. Subjects teaching at
Under Graduate Level
and Post Graduate
Level
At Postgraduate level: Rural Technologies; Development
and Planning, Sustainable Development, Rainwater
Harvesting & Watershed Management, Environmental
Impact Analysis
8. Research guidance
Master’s Thesis 05
completed,
Ph.D. 01 completed; 01 in Progress
No of papers Published in
-National Journal - 04
-International Journal - 03
-Conferences - 65
9. Projects Carried out 03 (02 in progress)
10. Patents -
11. Technology Transfer Rural Sanitation Technologies, Organic Farming, Pond
Renovation, Biogas Technology, Phyto remediation
12. Research Publications 07 papers
13. Number of Books
Published with Details
04:
1. Punia, RD & UN Roy “ Appropriate Technology’’ 1999, Satya
Prakashan N. Delhi
2. Iyer Gopal K & UN Roy “Watershed Management and
Sustainable Development”, 2005, Kanishka Publishers, New
Delhi
3. Roy UN “People Participation in Watershed Management”,
2005, Kanishka Publisher, New Delhi
4. Roy UN & JS Saini People’s Empowerment and Sustainable
Rural Development, 2009, Rawat Publication, Jaipur.
- - 19
1. Name Dr. C. Rama
Krishna
2. Designation Professor
3. Date of Joining the
institution
14.10.1996
4. Educational
Qualification
B.Tech. (ECE),
M.Tech. (Eltx.),
Ph.D. (Engg.)
5. Work Experience
- Teaching 17 yrs.
- Research 17 yrs.
- Industry -
- Others -
6. Area of Specialization Wireless Communications & Networks, Computer
Networks, Mobile Computing, Cloud Computing,
Cryptography and Cyber Security
7. Subjects teaching at
Under Graduate Level
and
Post Graduate Level
At Postgraduate level: Advanced Computer Networks,
Network Technologies, Network Security, Wireless
Networks, Internet & Web Technologies
8. Research guidance
Master’s Thesis 50
Ph.D. 08 in progress
No of papers Published in
-National Journal - 04
-International Journal - 08
-Conferences - 45
9. Projects Carried out 05 completed; 01 in proogress
10. Patents -
11. Technology Transfer -
12. Research Publications 57
13. Number of Books
Published with Details
-
- - 20
1. Name OS Khanna
2. Designation Associate Professor
3. Date of Joining the
institution
21.01.1981
4. Educational
Qualification
M.E. (ECE)
5. Work Experience
- Teaching 32 yrs.
- Research 2½ yrs.
- Industry 2½ yrs.
- Others -
6. Area of Specialization
- Computer Networks
7. Subjects teaching at
Under Graduate Level
and Post Graduate
Level
At Post Graduate Level: Computer Networks, Network
Security
8. Research guidance
16 ME Thesis guided; 15 in progress
9. Projects Carried out
-
10. Patents
-
11. Technology Transfer
-
12. Research Publications
-
13. Number of Books
Published with Details
-
- - 21
1. Name Ajay K Duggal
2. Designation Associate Professor
3. Date of Joining the
institution
02.02.1985
4. Educational
Qualification
B.Sc. Engg (Civil);
M.E (Transportation)
Ph.D. (pursuing)
5. Work Experience
- Teaching 27 yrs.
- Research -
- Industry 13 yrs.
6. Area of Specialization
- Transportation Engg; Pavement Design and
Construction; Foundation Engg.; Environmental Engg.
7. Subjects teaching at
Under Graduate Level
Post Graduate Level
As above
As above and Bridge Engg.; Advanced Construction
Technology; Disaster Management
8. Research guidance
Master’s Thesis : 15
Ph.D. : -
No. of papers Published :
-National Journal - 01
- International Journals - -
- Conferences - 01
9. Projects Carried out
i) Field Investigation for Strengthening & Widening of
Existing Corridors (Roads) in the State of Punjab
ii) Third party Inspection of various roads of MC
Panchkula, HUDA (including Design & Quality
Control)
iii) Quality Control for construction of 200ft wide road for
GMADA (Punjab)
iv) Bituminous Mix Design
v) Evaluation of Existing pavements and Design of
Overlays
10. Patents -
11. Technology Transfer -
12. Research Publications -
13. Number of Books
Published with Details
A) Books
i) A Text Books of Engineering Materials (Co-author)
ii) Laboratory Manual in Highway Engineering
i) Soil Sampling and Testing
iv) Water and Waste Water Analysis
B) Other Instructional Resources
v) 13 Readers
vi) 23 Nos. of video Films (Experimental/Field Based)
i) 7 Nos. Charts and 23 Nos. OHP Transparencies
ii) 1 CAL package on soil Classification
ix) 1 Software used for design of Bituminous Mixes
- - 22
1. Name Parmod K Singla
2. Designation Associate Professor
3. Date of Joining the
institution
01.08.1985
4. Educational
Qualification
BE Civil Engg., ME
Civil (Irrigation &
Hydraulics); Ph.D.
(pursuing)
5. Work Experience
- Teaching 29 yrs.
- Research 29 yrs. (including
teaching)
- Industry 1½ yrs.
- Others
6. Area of Specialization - Civil Engg., Appropriate low cost Technology and
Curriculum Development, Communication Skills and
Personality Development
7. Subjects teaching at
Under Graduate Level
and Post Graduate
Level
At Post Graduate level: Civil Engg., Appropriate
Technology and Curriculum Development
8. Research guidance
Master’s : 12 Guided
Ph.D. : Nil
No. of papers Published : 79
- National Journal - 15
- International Journals - 10
- Conferences 54
9. Projects Carried out About 75 Curriculum Design/review projects, besides
many Rural Development & other projects
10. Patents -
11. Technology Transfer More than 20 technologies
12. Research Publications 27 papers
13. Number of Books
Published with Details
08 Books:
i) Curriculum Development for Polytechnics, Chandigarh:
NITTTR, 1999 (co-author).
ii) English & Communication Skills – 1, Chandigarh: Abhishek
Publishers, 2005 (co-author).
iii) English & Communication Skills – 2, Chandigarh: Abhishek
Publishers, 2005(co-author).
iv) Text Book on English & Communication Skills – 1 for Punjab),
Chandigarh: Abhishek Publishers, 2012 (co-author).
v) Text Book on English & Communication Skills – 2 for Punjab),
Chandigarh: Abhishek Publishers, 2012 (co-author).
vi) English and communication skills-3, Chandigarh: Abhishek
Publishers, 2008 (co-author).
vii) Applied Mechanics, Chandigarh: Abhishek Publishers, 2009
(co-author).
viii)Basics of Management, Abhishek Publishers, 2012 (co-author).
- - 23
1. Name Dr. (Mrs.) Poonam
Syal
2. Designation Associate Professor
3. Date of Joining the
institution
11.02.1986
4. Educational
Qualification
ME (Electrical);
Ph.D.
5. Work Experience
- Teaching 26 yrs.
- Research -
- Industry -
- Others -
6. Area of Specialization
- Planning and Management of Community Development
Programmes, Appropriate Technology and its transfer,
Renewable Energy based Technologies, Competency
based training programmes
7. Subjects teaching
Under Graduate Level
Post Graduate Level
- Technology Transfer for Rural Development
- Training for Rural Youth
8. Research guidance
Master’s
Ph.D.
Nil
No. of papers published in
-National Journals, -5
-International -Nil
-Conferences -32
9. Projects Carried out 08
10. Patents -
11. Technology Transfer
Guiding Community Polytechnics for transferring of
appropriate technologies specially in the area of alternate
energy sources related technologies and biotechnology.
12. Research Publications 32
13. Number of Books
Published with Details
Nil
- - 24
1. Name Dr. (Mrs.) Lini
Mathew
2. Designation Associate Professor
3. Date of Joining the
institution
10.11.1988
4. Educational
Qualification
B.E (Electrical);
M.E. (Electrical),
Ph.D.
5. Work Experience
- Teaching 24 yrs.
- Research 06 yrs.
- Industry 02 yrs.
- Others -
6. Area of Specialization
ANN & Fuzzy Logic Applications; Digital Signal Processing,
Measurement Instrumentation and Data Acquisition, Virtual
Instrumentation
7. Subjects teaching at
Under Graduate Level
and Post Graduate
Level
At Undergraduate level: Digital Signal Processing and its
Applications; Artificial Neural Networks and Fuzzy Logic;
Distributed Control Systems; Process Instrumentation and
Control; MATLAB Programming; Automation in Industrial
Process Control; Instrumentation and Control; Laboratory
Practices in Electrical Engineering; Electrical Machines; Electrical
Design, Drawing, Estimating and Costing; At Postgraduate level:
Measurement Sciences; Digital Signal Processing; PC Interfacing
and Data Acquisition; Industrial Applications of Fuzzy logic and
Artificial Neural Networks; Virtual Instrumentation
8. Research guidance
Master’s 60
Ph.D.
Nil
No. of papers published in
-National Journals, - 4
-International - 11
-Conferences - 29
9. Projects Carried out
Design and Development of a PC based monitoring system for a
three-phase induction motor; Study and Implementation of Digital
Signal Processing Tools; Study and Implementation of various DSP
transforms; Digital simulation of a three-phase full-wave fully
controlled rectifier; Design and development of Neuro-Fuzzy
Controllers; Simulation of different FACTS Controllers using
MATLAB/SIMULINK, Several consultancy and IRG projects carried
out at the institute level which in turn generated funds to the tune of
several lacs; Designed and developed the following Instructional
material viz., Contactor Control Circuits; Reading and Interpreting
Engineering Drawing; A monograph on Units and Dimensions;
Installation Trouble-shooting and Preventive Maintenance of Motors,
Transformers and Batteries; Signal Processing; Programming in C;
MATLAB Programming; Introduction to LabVIEW.
10. Patents -
11. Technology Transfer -
12. Research Publications - 44 Papers
13. Number of Books
Published with Details
- One Book:
Electrical Technology for Engineering Services
Examinations, Co-authored with Dr. S.K. Bhattacharya.
TMH Publishing Company, New Delhi
- - 25
1. Name Suresh Kumar
Gupta
2. Designation Associate Professor
3. Date of Joining the
institution
01.02.1988
4. Educational
Qualification
B.E. (Civil); M.E.
(Structures); Ph.D.
(in progress)
5. Work Experience
- Teaching 26 yrs.
- Research 26 yrs.
- Industry -
- Others -
6. Area of Specialization - Civil Engg.(Structures); Curriculum Development
7. Subjects teaching at
Under Graduate Level
and Post Graduate
Level
At Postgraduate level: Advanced Structural Analysis;
Curriculum Development
8. Research guidance
Master’s
Ph.D
No. of papers Published in
- National Journals 15
- International Journals
- Conferences 11
9. Projects Carried out Curriculum Design/Revision of Diploma Programmes -85
Nos.
10. Patents -
11. Technology Transfer -
12. Research Publications 11
13. Number of Books
Published with Details
Two:
Co-author of a text book on Curriculum Development for
Polytechnics;
Co-editor of ‘Curriculum Innovations in Technical &
Vocational Education’; Chandigarh: Abhishek Publications,
2010
- - 26
1. Name Mrs. Rama Chhabra
2. Designation Associate Professor
3. Date of Joining the
institution
04.09.1992
4. Educational
Qualification
ME (Chemical);
5. Work Experience
- Teaching 19 yrs.
- Research 01 yr
- Industry 01 yr
- Others -
6. Area of Specialization - Information Management; Curriculum Development
7. Subjects teaching at
Under Graduate Level
and Post Graduate
Level
-
8. Research guidance
Master’s 01
Ph.D
- No. of papers Published in
- National Journals 04
- International Journals -
- Conferences 22 (National 20, International – 02)
9. Projects Carried out - 10 Research Projects;
- Curriculum Design/Revision Projects - 15
10. Patents -
11. Technology Transfer -
12. Research Publications - 05 papers
13. Number of Books
Published with Details
-
- - 27
1. Name Vinod Kumar
Sonthwal
2. Designation Associate Professor
3. Date of Joining the
institution
10.05.1995
4. Educational
Qualification
B. Tech. Civil
Engg.; M. Tech.
(Hons) in
Geotechnical Engg.,
Ph.D. (pursuing)
5. Work Experience
- Teaching 18 yrs.
- Research 6 yrs.
- Industry -
- Others -
6. Area of Specialization - Soil Mechanics and Foundation Engineering
7. Subjects teaching at
Under Graduate Level
At Post Graduate
Level
i) Foundation Design and Construction
ii) Construction Equipment
iii) Advanced Construction Technology
iv) Construction Management
8. Research guidance
Master’s : 04
Ph.D. : Nil
-No. of papers Published in :
-National Journal - 01
-International Journals - Nil
-Conférences - 02
9. Projects Carried out 1) Package of Educational video film on Geo- technical
Engineering; ii) Soil Investigation and Bearing
Capacity Determination
10. Patents -
11. Technology Transfer -
12. Research Publications 03
13. Number of Books
Published with Details
A) Module on
- Computer Based Network Analysis
- Auto CAD
B) Reader on
i) Shallow Foundations
ii) Compaction Equipment
iii) Dewatering; iv) Earth Dams
v) Earth Moving Equipment
- - 28
1. Name Rajesh Kumar
2. Designation Associate Professor
3. Date of Joining the
institution
15.03.1996
4. Educational
Qualification
ME (ECE);
Ph.D. (pursuing)
5. Work Experience
- Teaching 16 yrs.
- Research 04 yrs.
- Industry -
- Others -
6. Area of Specialization
-VLSI Design, Embedded System Design, Advanced DSP,
PLC & SCADA
7. Subjects teaching at
Under Graduate Level
and Post Graduate
Level
- At Postgraduate Level: Embedded System Design,
Advanced DSP, VLSI Design
8. Research guidance
Master’s 35 completed,
30 in Progress
Ph.D. Nil
No of papers Published in
-National Journal - 01
-International Journal - 80
-Conferences - 45
9. Projects Carried out
-
10. Patents
-
11. Technology Transfer
-
12. Research Publications 125 Papers
13. Number of Books
Published with Details
01
- - 29
1. Name Sunil D Jassal
2. Designation Associate Professor
3. Date of Joining the
institution 01.09.1997
4. Educational
Qualification
B.E (Mech); ME
(Thermal )
5. Work Experience
- Teaching 15 yrs
- Research -
- Industry 3½ yrs.
- Others -
6. Area of
Specialization
- Thermal Engg.
7. Subjects teaching at
Under Graduate
Level and Post
Graduate Level
At Post Graduate Level: Tool Engg., Advance
Manufacturing Methods, Materials for
Manufacturing.
8. Research guidance - Nil
9. Projects Carried out - Nil
10. Patents - Nil
11. Technology
Transfer
- Nil
12. Research
Publications
- Nil
13. Number of Books
Published with
Details
- Nil
- - 30
1. Name Shano Solanki
2. Designation Assistant Professor
3. Date of Joining the
institution
05.06.2000
4. Educational
Qualification
MCA
5. Work Experience
- Teaching 13 yrs.
- Research -
- Industry -
- Others -
6. Area of Specialization Data Structures, Web based Training,
Algorithm Analysis & Design, Multimedia System Design
and Multimedia Application Software,
7. Subjects teaching at
Under Graduate Level
and Post Graduate
Level
Algorithm Analysis & Design, Web based Training
Multimedia Tools; Open Source Software
8. Research guidance
Master’s
Ph.D. Nil
No of papers Published in
-National Journal -
-International Journal -
-Conferences - 05
9. Projects Carried out - Nil
10. Patents - Nil
11. Technology Transfer - Nil
12. Research Publications - Nil
13. Number of Books
Published with Details - Nil
- - 31
1. Name Amit Doegar
2. Designation Assistant Professor
3. Date of Joining the
institution
14.02.2001
4. Educational
Qualification
B.E; M.E (Computer Science &
Engg.);
5. Work Experience
- Teaching 12 yrs.
- Research -
- Industry 02 yrs.
- Others -
6. Area of Specialization - Networking, Web Technology
Open Source Technology
7. Subjects teaching at
Under Graduate Level
and Post Graduate
Level
- At Postgraduate Level: Distributed Operating System,
Data Warehousing & Data Mining, Computer Vision and
Image Processing, Web based Training
8. Research guidance
Master’s 20
Ph.D. Nil
No of papers Published in
-National Journal/International Journal/ Conferences - 25
9. Projects Carried out - Nil
10. Patents - Nil
11. Technology Transfer - Nil
12. Research Publications - 26 papers in journals/conferences;
13. Number of Books
Published with Details
-
- - 32
1. Name Patange Sudhakar Rao
2. Designation Assistant Professor
3. Date of Joining the
institution 17.10.2004
4. Educational
Qualification
M.Tech.(CAD/CAM);
Ph.D.(pursuing)
5. Work Experience
- Teaching 10 yrs.
- Research -
- Industry 04yrs.
6. Area of
Specialization
- CAD/CAM, CNC, Robotics and FEM
7. Subjects teaching
at Under Graduate
Level and Post
Graduate Level
At Undergraduate Level: CAD/CAM, Robotics,
Design of M/c; Elements, TOM, KOM, & FEM
MT-1, MT-II, CAD for Manufacturing, FET
8. Research guidance
Master’s Thesis 16
Ph.D. Nil
No of papers Published in
- National Journal - Nil
- International Journal - Nil
- Conferences - 11
9. Projects Carried
out
i) FEM for flywheel of an automobile;
ii)Design of forging dies using CAM;
iii)Design of sheet metal dies using CAM
iv)Study and Analysis of Capacity Utilization, Process
Planning and Production Control in Machining Process
v)Implementation of Total Productive Maintenance: A Case
Study
10. Patents Nil
11. Technology
Transfer
Nil
12. Research
Publications
Nil
13. Number of Books
Published with
Details
Nil
- - 33
1. Name Kanika Sharma
2. Designation Assistant Professor
3. Date of Joining the
institution 17.11.2004
4. Educational
Qualification
M.E. (ECE); Ph.D.
(pursuing)
5. Work Experience
- Teaching 11 yrs.
- Research 09 yrs.
- Industry -
- Others -
6. Area of
Specialization
- Embedded Systems, Digital System Designing and Wireless
Sensor Networks
7. Subjects teaching
at Under
Graduate Level
and Post
Graduate Level
At Undergraduate Level: Micro-processors, Digital
Communication, Communication Systems;
At Postgraduate Level: Digital System Design, Satellite
Communication; Embedded System Design
8. Research guidance
Master’s Thesis 05
Ph.D.
No of papers Published in
- National Journal - 03
- International Journal - 05
- Conferences - 06
9. Projects Carried
out
- Nil
10. Patents - Nil
11. Technology
Transfer
- Nil
12. Research
Publications
14
13. Number of Books
Published with
Details
- Nil
- - 34
1. Name Ms. Ritula Thakur
2. Designation Assistant Professor
3. Date of Joining the
institution
31.05.2006
4. Educational
Qualification
ME (Electrical),
Ph.D. (pursuing)
5. Work Experience
- Teaching 09 yrs.
- Research -
- Industry -
- Others -
6. Area of
Specialization
-Power Systems, Electric Drives, Microprocessors,
Microcontrollers, FACTS, Custom Power Devices,
Embedded Systems, Power Quality, Sensors for Moisture
Determination in Grains
7. Subjects teaching
at Under Graduate
Level and Post
Graduate Level
At Undergraduate Level: Basic Electrical Engineering,
Generation of Electrical Power, Electrical Engineering
Materials, Microprocessors, Electric Drives, Electrical
Energy Utilization, FACTS Devices; At Postgraduate
Level: Measurement Sciences, Industrial Instrumentation,
Microprocessors and Microcontrollers, Electric Drivers
8. Research guidance
Master’s Thesis 12
Ph.D. Nil
Nil
No. of papers published in
-National Journals - 03
-International - 08
-Conferences - 12
9. Projects Carried
out
Temperature measurement using microcontrollers;
Stepper motor control using microcontroller
10. Patents -
11. Technology
Transfer
-
12. Research
Publications
23
13. Number of Books
Published with
Details
One Developed Laboratory Manual on
‘Applications of Microcontrollers’ (Co-authored)
- - 35
1. Name Amit Goyal
2. Designation Assistant Professor
3. Date of
Joining the
institution
05.06.2006
4. Educational
Qualification
BE (Civil); ME (Structures);
Ph.D. (pursuing at IIT,
Roorkee)
5. Work
Experience
- Teaching 07 yrs.
- Research 05 yrs.
- Industry 11 Months
- Others Lectures in STC on N.D.T, Low cost Housing, Ferro Cement
Technology, Earth Risk Management
6. Area of
Specialization
- Civil (Structures)
7. Subjects teaching at
Under
Graduate
Level and Post
Graduate Level
At Undergraduate Level: Subject related to Structures
TOS, DESIGN, R.C.C, T.O.S LAB, F.M
At Postgraduate Level: Structures, Tall Buildings, Rural
Housing, NDT Techniques, Low cost constructional
materials
8. Research
guidance
No. of papers
Published in
Masters
-
- National Journals
- International Journals
- Conferences – 01; Published but not presented - 06
9. Projects
Carried out
Non-destructive Testing of R.C.C Structures, Rehabilitation
of RCC & Masonry Buildings, Repair of Bridges and
Rehabilitation; Research sudy on Private V/s. Govt.
Polytechnics for the state of Rajasthan
10. Patents Nil
11. Technology
Transfer
Ferro cement Technology, Earthquake Resistant Housing,
low cost housing, floating rafters, water filtration system
12. Research
Publications
-
13. Number of
Books
Published
with Details
- 01
- ‘Empowering the Disabled’ (authored by Saini, JS &
Goyal, A), Chandigarh: Abhishek Publications, 2009.
- - 36
1. Name Garima Saini
2. Designation Assistant Professor
3. Date of Joining the
institution
20.09.2006
4. Educational
Qualification
B.Tech., M.Tech.
(ECE),
Ph.D.(pursuing)
5. Work Experience
- Teaching 12 yrs.
- Research 05 yrs.
- Industry -
- Others -
6. Area of
Specialization
- Wireless and Mobile Communication
- Advanced Digital Communication
7. Subjects teaching at
Under Graduate Level
and Post Graduate
Level
At Undergraduate Level: Analog Electronics, Digital
Electronics, Communication System;
At Postgraduate Level: Advanced Digital Communication,
Optical Communication, Mobile & Wireless
Communication
8. Research guidance
Master’s 23 completed;
10 in progress
Ph.D. Nil
No of papers Published in
-National Journal - 01
-International Journal - 18
-Conferences - 23
9. Projects Carried out Nil
10. Patents Nil
11. Technology
Transfer
Nil
12. Research
Publications
42
13. Number of Books
Published with
Details
-
- - 37
1. Name Shimi SL
2. Designation Assistant Professor
3. Date of Joining the
institution
05.08.2011
4. Educational
Qualification
BE (Electrical &
Electronics), M.E.
(Power Electronics
& Drives) Ph.D.
(Pursuing)
5. Work Experience
- Teaching 10 yrs.
- Research Nil
- Industry 1 year
- Others -
6. Area of Specialization - Power Electronics & Drives; Digital Control; FACTS
7. Subjects teaching at Under
Graduate Level and Post
Graduate Level
- At Undergraduate Level: Power Electronics & Drives,
Electrical machines, Circuit Theory, Digital Electronics,
Environmental Science; MATLAB Programming,
Automation in Industrial Process Control; and
Laboratory Practices
- At Postgraduate Level: Digital Control, Industrial
Electronics
8. Research guidance
Master’s 05 completed
20 in progress
Ph.D. Nil
No of papers Published in
- National Journal - 01
- International Journal - 16
- Conferences - 28
9. Projects Carried out - Real Time simulation of boost converter;
- Microcontroller based Multi-starter for squirrel
cage induction motor
10. Patents -
11. Technology Transfer -
12. Research Publications 45
13. Number of Books
Published with
Details
-
- - 38
1. Name Mala Kalra
2. Designation Assistant Professor
3. Date of Joining the
institution
09.08.2011
4. Educational
Qualification
B.E. (CSE), M.E.
(CSE); Ph.D.
(Pursuing)
5. Work Experience
- Teaching 8 yrs.
- Research Nil
- Industry 6 months
- Others -
6. Area of Specialization - Cloud Computing, Grid Computing, Information
Retrieval, Data Structure
7. Subjects teaching at Under
Graduate Level and Post
Graduate Level
- At Undergraduate Level: taught Computer Networking,
Operating System, Data Structures, Web Technologies
- At Postgraduate Level: Grid Computing; Cloud
Computing; Software Testing & Quality
Management; Business Intelligence & Data Mining
8. Research guidance
Master’s 05 completed
08 in progress
Ph.D. Nil
No of papers Published in
- National Journal - Nil
- International Journal - Nil
- Conferences - 08
9. Projects Carried out
10. Patents -
11. Technology Transfer -
12. Research Publications 08
13. Number of Books
Published with
Details
-
- - 39
1. Name Himmi Gupta
2. Designation Assistant Professor
3. Date of Joining the
institution
26.08.2011
4. Educational
Qualification
BE (Civil), M.E.
(Structures)
5. Work Experience
- Teaching 2½ yrs.
- Research Nil
- Industry 4½ years
- Others -
6. Area of Specialization - Structural Engineering, Bridge Engineering, Project
Management, Environmental Engg., Structural
Retrofitting and Rehabilitation, Construction
Management
7. Subjects teaching at Under
Graduate Level and Post
Graduate Level
- At Undergraduate Level:
- At Postgraduate Level: as above
8. Research guidance
Master’s 02 completed
01 in progress
Ph.D. Nil
No of papers Published in
- National Journal - Nil
- International Journal - Nil
- Conferences - 05
9. Projects Carried out -
10. Patents -
11. Technology Transfer -
12. Research Publications 05
13. Number of Books
Published with
Details
- Energy Trends in Civil Engineering (Proceedings
of national Seminar from 16-17 Nov., 2011 (Excel
Publishers)
- - 40
1. Name TN Thukral
2. Designation Assistant Professor
3. Date of Joining the
institution
03.08.2012
4. Educational
Qualification
B.E. (Electrical
Engg.), Master of
Engg. Education
(MEE); PG
Diploma in
Industrial Relations
& Personnel Mgt.
5. Work Experience
- Teaching 31 yrs.
- Research 21 yrs.
- Industry 2 yrs.
- Others 5 yrs
6. Area of
Specialization
- Technical and Vocational Education
- Curriculum Development
- Electrical Engineering
7. Subjects teaching at
Under Graduate Level
and Post Graduate
Level
At Undergraduate Level:
At Postgraduate Level: Curriculum Development;
Technical & Vocational Education; Learning & Instruction;
Research Methodology and Project Management;
Educational Technology
8. Research guidance
Master’s Nil
Ph.D. Nil
No of Papers Published in
- National Journal - 05
- International Journal - Nil
- Conferences - 10
9. Projects Carried out -100 Curriculum Development Projects
10. Patents Nil
11. Technology
Transfer
Nil
12. Research
Publications
05
13. Number of Books
Published with
Details
- One:
Curriculum Development for Polytechnics, TTTI,
1999 (co-author)
- - 41
1. Name Amardev Singh
2. Designation Assistant Professor
3. Date of Joining the
institution
17.08.2012
4. Educational
Qualification
B.Tech. (ECE),
MBA (IT-
Networking), Ph.D.
in Business Mgt.
(Pursuing)
5. Work Experience
- Teaching 3 yrs.
- Research 1 yrs
- Industry 7 months.
- Others -
6. Area of
Specialization
- IT – Networking; Marketing Management,
Technology Adoption & Management; Green
Information Technology
7. Subjects teaching at
Under Graduate Level
and Post Graduate
Level
At Undergraduate Level: Marketing Mgt., Entrepreneurial
Development & Mgt., Microwave & Radar Engg., Signals &
Systems,
At Postgraduate Level: - Technology Management
8. Research guidance
Master’s Nil
Ph.D. Nil
No of papers Published in
- National Journal - Nil
- International Journal - Nil
- Conferences - 03
9. Projects Carried out - Nil
10. Patents - Nil
11. Technology
Transfer
- Nil
12. Research
Publications
- Nil
13. Number of Books
Published with
Details
- Nil
- - 42
1. Name Amandeep Kaur
2. Designation Assistant Professor
3. Date of Joining the
institution
09.07.2014
4. Educational
Qualification
BE (Chemical
Engg), ME
(Environmental
Engg.)
5. Work Experience
- Teaching 6½ yrs.
- Research -
- Industry -
- Others -
6. Area of
Specialization
- Environmental Engineering
7. Subjects teaching at
Under Graduate Level
and Post Graduate
Level
At Undergraduate Level: Fluid Mechanics, Environmental
Sciences, Natural Disaster Management
At Postgraduate Level: - Environmental Impact
Assessment & Policy
8. Research guidance
Master’s Nil
Ph.D. Nil
No of papers Published in
- National Journal - 01
- International Journal -
- Conferences - 01
9. Projects Carried out - Nil
10. Patents - Nil
11. Technology
Transfer
- Nil
12. Research
Publications
- 01
13. Number of Books
Published with
Details
- Nil
- - 43
1. Name Rakesh Kumar
2. Designation Assistant Professor
3. Date of Joining the
institution
05.01.2015
4. Educational
Qualification
B.Tech (Computer
Science & Engg),
M.Tech (Info.
Tech.); Ph.D. thesis
submitted
5. Work Experience
- Teaching 10 yrs.
- Research -
- Industry -
- Others -
6. Area of
Specialization
- Adhoc Networks
7. Subjects teaching at
Under Graduate Level
and Post Graduate
Level
At Undergraduate Level: Discrete Mathematical
Structures, Autamata Theories, Microprocessors, Wireless
Communication
At Postgraduate Level: - Mobile Computing, Software
Testing
8. Research guidance
Master’s 19
Ph.D. Nil
No of papers Published in
- National Journal - 01
- International Journal - 22
- Conferences - 17
9. Projects Carried out - Nil
10. Patents - Nil
11. Technology
Transfer
- Nil
12. Research
Publications
- 22
13. Number of Books
Published with
Details
- Nil
- - 44
1. Name Dr. Kailash Chandra
Lachhwani
2. Designation Assistant Professor
3. Date of Joining the
institution
08.01.2015
4. Educational
Qualification
M.Sc. (Maths),
MPhil, Ph.D.
(Maths); MBA
5. Work Experience
- Teaching 10 yrs.
- Research -
- Industry -
- Others -
6. Area of
Specialization
- Operation Research, Mathematical Programming
7. Subjects teaching at
Under Graduate Level
and Post Graduate
Level
At Undergraduate Level: Engineering Mathematics,
Operation Research, Optimization techniques
At Postgraduate Level: - Operation Research
8. Research guidance
Master’s Nil
Ph.D. Nil
No of papers Published in
- National Journal - 09
- International Journal - 12
- Conferences - 16
9. Projects Carried out - Nil
10. Patents - Nil
11. Technology
Transfer
- Nil
12. Research
Publications
- 21
13. Number of Books
Published with
Details
- 01:
Engineering Mathematics II, 2009, Jaipur: Saroj Publication.
- - 45
10.14 Admission Quota
� For each Programme the following details are to be given (for 2014– 15):
Total number of seats in each of the ME Regular Programmes is given below:
S.
No.
Branch of Master of Engineering
(Regular) Programme
Sanctioned
Intake
Distribution of seats
Sponsored
Poly./Engg.
College Regular
teachers, officials
of DTEs/BTEs
Sponsored
working
professionals
from industry/
other
organizations
including
universities
Fresh
engineeri
ng
graduate
candidates
i. ME in Mechanical Engineering
(Manufacturing Technology)
28 19 04 05
ii. ME in Civil Engineering
(Construction Technology &
Management)
28 19 04 05
iii. ME in Computer Science &
Engineering
28 19 04 05
Branch of Master of Engineering
(Regular) Programme
Sanctioned
Intake
Sponsored
Poly./Engg.
College Regular
teachers, officials
of DTEs/BTEs
Fresh engineering
graduate candidates and
working professionals
from industry/ other
organizations including
universities
iv. ME in Electrical Engineering
(Instrumentation and Control)
26 20 06
v. ME in Electronics & Communication
Engineering
19 11 08
ME Regular Programmes:
Total number of seats in each of the ME Regular programmes at Sr. Nos. (i), (ii) and (iii) above are 28. • 19 seats in each programme are for full time sponsored Polytechnic/Engineering College Regular
teachers, officials of Directorates and Boards of Technical Education • 4 seats in each programme are for full time sponsored working professionals from industry/other
organizations including technical staff of universities and • 5 seats are for fresh engineering graduate candidates. Fresh Engineering graduates shall be admitted
on the basis of valid GATE score or OCET (Other Common Entrance Test, if conducted by PU, Chandigarh) merit of PU, Chandigarh {as per criteria approved by Panjab University, Chandigarh}. All such candidates must apply for these programmes in the institute by the last date on the application form downloaded from www.nitttrchd.ac.in. In addition they are also required to apply to Panjab University, Chandigarh for appearing in the OCET (Rules & Regulations and date of OCET can be checked from website of Panjab University, Chandigarh: www.pu.ac.in).
Total number of seats in ME Regular programmes at Sr. Nos. (iv) and (v) above are 26 and 19 respectively. • 20 and 11 seats respectively in these programmes are for full time sponsored Polytechnic/Engineering
College Regular teachers, officials of Directorates, Boards of Technical Education, and • 6 seats and 8 seats respectively in these programmes are for fresh engineering graduates and candidates
from industry/ other organizations including technical staff of universities. Fresh Engineering graduates and candidates from industry/ other organizations including universities in these programmes shall be admitted on the basis of valid GATE score or OCET merit of PU,
- - 46
Chandigarh {as per criteria approved by Panjab University, Chandigarh}. All such candidates must apply for these programmes in the institute by the last date on the application form downloaded from www.nitttrchd.ac.in. In addition they are also required to apply to Panjab University, Chandigarh for appearing in the OCET (Rules & Regulations and date of OCET can be checked from website of Panjab University, Chandigarh: www.pu.ac.in).
Vacant seats, if any, under sponsored category candidates in all ME (Regular) programmes will be filled up from amongst corresponding eligible fresh graduates (with valid GATE score or through OCET of PU, Chandigarh).
Due credit will be given to GATE qualified fresh engineering candidates for these ME Regular programmes only (and shall be offered the seat at the first instance as per Panjab University rules & regulations).
ME Modular Programmes:
Total number of seats in each of the ME Modular Programmes is given below:
S. No.
Branch of Master of Engineering (Modular) Programme Number of seats Modular
i. ME in Mechanical Engineering (Manufacturing Technology) 40 ii. ME in Civil Engineering (Construction Technology & Management) 40 iii. ME in Computer Science & Engineering 40 iv. ME in Electrical Engineering (Instrumentation and Control) 40 v. ME in Electronics & Communication Engineering 40
Total number of seats in each of the five ME Modular programmes at Sr. Nos. (i) to (v) above are 40, for sponsored Polytechnic/Engineering College Regular teachers, officials of Directorates, Boards of Technical Education, Universities and official/staff of NITTTRs. However, sponsored candidates from industry & other organizations may also apply in these ME Modular programmes as vacant seats, if any, under sponsored teacher category candidates in all ME (Modular) programmes will be filled up from amongst corresponding eligible sponsored candidates from industry and other organizations.
Reservation
15% seats are reserved for SC candidates, 7.5% seats for ST candidates, 3% for disabled candidates and 27% seats for OBC candidates as per instructions of Govt. of India applicable to Central Educational institutions.
� Entrance Test/Admission Criteria:
Preparation of Merit List
a) Sponsored Candidates The institute prepares a merit list of all sponsored eligible candidates based on the aggregate
percentage of marks obtained in all the semesters/years of qualifying examination and the total
experience. The admission is granted to candidates strictly according to the merit list, prepared as
follows:
(i) Qualification Multiplying Factor a) % of marks in BE or its equivalent x 0.4
b) % of marks in B.A/ B.Sc x 0.2
Plus + Total Score
% of marks in M.A/ M.Sc x 0.2
The candidates must write in the application form, the maximum marks, marks
obtained in each of eight semesters/four years and the exact percentage of
aggregate marks.
(ii) Experience
One score for each number of completed years of total experience on the last day
of receiving application gained after obtaining minimum entry qualification
- - 47
subject to a maximum of ten. Experience against leave vacancy, visiting/guest
faculty will not be counted.
Note: The total score calculated based on qualifications and experience as
mentioned in (i) and (ii) above should not be less than 25.
b) General Candidates
General candidates and candidates from industry and other organizations including
universities {only against few seats in M.E. Instrumentation & Control (Regular) and M.E.
Electronics & Communication Engg. (Regular) programmes} shall be admitted on the basis of
OCET merit as per criteria approved by Panjab University, Chandigarh. Due credit will be
given to GATE qualified general candidates for these two M.E. Regular programmes only.
The names of GATE qualified general candidates, if admitted, on the above basis, will be
recommended/forwarded to AICTE, New Delhi for scholarship as per rules.
Qualifications and Experience for Admission:
(i) M.Tech. Engineering Education
A Bachelor’s Degree in Engineering/ Technology/Pharmacy from a recognized University or its
equivalent OR Master’s Degree in Mathematics/ Physics/Chemistry from a recognized University with
atleast 60% marks in aggregate and post qualification experience of atleast 2 years (3 years in case of
AMIE/IETE after diploma) in teaching/industry/research organization.
(ii) M.E. Manufacturing Technology
A Bachelor’s Degree in Manufacturing Technology/Mechanical Engg/Production Engg./Industrial
Engg./Automobile Engg. from a recognized University or its equivalent with atleast 60% marks in
aggregate and post qualification experience of atleast 2 years (3 years in case of AMIE after diploma)
in teaching/industry/research organization.
(iii) M.E. Construction Technology and Management
A Bachelor’s Degree in Civil Engineering from a recognized University or its equivalent with atleast
60% marks in aggregate and post qualification experience of atleast 2 years (3 years in case of AMIE
after diploma) in teaching/ industry/ research organization.
(iv) M.E. Computer Science and Engineering
A Bachelor’s Degree in Computer Science and Engineering/Electronics Engg./Electrical
Engg./Instrumentation Engg./Information Technology from a recognized University or its equivalent
with atleast 60% marks in aggregate and post qualification experience of atleast 2 years (3 years in case
of AMIE/IETE after diploma)in teaching/industry/research organization.
(v) M.E. Instrumentation and Control
A Bachelor’s Degree in Electrical Engineering /Electronics Engineering/ /Instrumentation and Control
Engineering from a recognized University or its equivalent with atleast 60% marks in aggregate and
post qualification experience of atleast 2 years (3 years in case of AMIE/IETE after diploma) in
teaching/industry/research Org.
(vi) M.E. Eltx. And Commn. Engg.
A Bachelor’s Degree in Electronics and Communication Engineering from a recognized University or
its equivalent with atleast 60% marks in aggregate and post qualification experience of atleast 2 years
(3 years in case of AMIE/IETE after diploma) in teaching/industry/research organization.
No experience is required for general candidates
- - 48
� Cut off/last candidate admitted: The data is given for the year 2012 – 13, 2013 – 14 & 2014 – 15:
Marks obtained vide above mentioned admission criteria are displayed on the notice boards and
institute website.
� APPLICATION FORM: Downloadable application form with online submission possibilities: Put on website during admission process; List of candidates whose applications have
been received along with percentile/ percentage score for each of the qualifying
examination in separate categories for open seats: List was displayed & loaded on the
website also.
� List of candidates who have applied along with percentage and percentile score for
Management/ quota seats. : Not applicable
S.
No.
M.Tech/ME
Programme(s) 2012– 13 2013– 14 2014– 15
MINIMUM
SCORE
MINIMUM
SCORE
MINIMUM
SCORE
MAXIMUM
SCORE
MINIMUM
SCORE
MAXIMUM
SCORE
1. M. Tech Engg. Education (Regular)
Since only few applications
were received, thus
admissions were not made
during 2012 – 13
Since only few applications
were received, thus
admissions were not made
during 2013 – 14
Since Panjab University,
Chandigarh did not approve
the course, no admissions
were made during 2014 – 15
2. ME Civil Engg. (Const. Tech. & Mgt.) (Regular)
Since only few applications
were received, thus
admissions were not made
during 2012 – 13
24.04 32.98 25.36 60.27
3. ME Mechanical Engineering (Manufacturing Tech.) (Regular)
Since only few applications
were received, thus
admissions were not made
during 2012 – 13
24.69 32.79 24.08 47.32
4. ME Comp. Sc. & Engg. (Regular)
24.04 32.98 23.36 47.34 26.53 59.51
5. ME Electrical Engg. (Inst. & Control) (Regular)
24.04 32.98 24.99 59.72 27.22 43.66
6. ME Eltx. & Comm. Engg. (Regular)
24.04 32.98 27.12 51.47 28.27 49.89
7. M. Tech Engg. Education (Modular)
26.76 36.52 26.50 33.24 Since Panjab University,
Chandigarh did not approve
the course, no admissions
were made during 2014 – 15
8. ME Civil Engg. (Const. Tech. & Mgt.) (Modular)
27.19 35.92 27.04 40.51 26.50 35.72
9. ME Mechanical Engineering (Manuf Tech.) (Modular)
27.48 34.78 26.50 37.02 26.08 44.87
10. ME Comp. Sc. & Engg. (Modular)
28.59 37.74 27.72 38.29 27.99 36.22
11. ME Electrical Engg. (Inst. & Control) (Modular)
27.52 37.72 27.50 39.08 27.02 36.56
12. ME Eltx. & Comm. Engg. (Modular)
28.04 35.86 27.74 43.50 26.75 37.88
- - 49
� FEE IN RUPEES
S.No. Details of Fee Modular Regular i) Admission fee one time Rs. 1,000/- Rs. 1,000/-
ii) Programme fee :
a) Sponsored Teachers of Tech.
Instts., officials of DTEs/BTEs etc.
b) Fresh Engineering Graduates
c) Industries candidates
Rs. 12,500/- per spell
--------
Rs. 14,000/- per spell
Rs. 17,000/- per semester
Rs. 17,000/- per semester
Rs. 22,000/- per semester
iii) Various funds payable to Instt. Rs. 1,800/- (annually) Rs. 2,500/- per semester
iv) a) Various fee and funds payable
to the Panjab University
b) University Examination fee
Rs. 1,052/- (annually)
Rs. 1,760/- per spell
Rs. 1,052/- (annually)
Rs. 2,880/- per semester
v) Continuation Fee Rs. 1,000/- per spell
(after 6th spell)
Rs. 1,500/- per semester
(after 4th semester)
v) Security refundable Rs. 5,000/- Rs. 5,000/-
vi) Thesis Fee Rs. 880/- Rs. 880/-
vii) Extension of period for submission
of thesis (per year or part thereof)
Rs. 1,210/- Rs. 1,210/-
� NUMBER OF FEE WAIVERS OFFERED : NIL
� Academic Calendar of the University
For the Session 2014 – 2015 for M. Tech/ME Modular Programmes
Spell June, 2014 VIIth Spell for Batch, 2011; Vth Spell for Batch, 2012; IIIrd Spell for Batch 2013; and Ist spell for new Batch 2014
Spell December, 2014 VIth Spell for Batch 2012; IVth Spell for Batch 2013 and IInd spell for Batch 2014
Spell June, 2015 VIIth Spell for Batch, 2012; Vth Spell for Batch, 2013, IIIrd Spell for Batch 2014 and Ist Spell for new Batch 2015
Normal Admission 30.05.2014 28.11.2014 to 02.12.2014
29.05.2015
Registration for old students
30.05.2014 to 03.06.2014 29.05.2015 to 02.06.2015
Late admission to be allowed by the Director NITTTR, with late fee of `1,000/-
04.06.2014 to 11.06.2014 03.12.2014 to 05.12.2014 03.06.2015 to 11.06.2015
University Examination for previous batch (two papers)
02.06.2014 to 07.06.2014 01.12.2014 to 06.12.2014 01.06.2015 to 06.06.2015
Commencement of Classes
07.06.2014 06.12.2014 06.06.2015
Teaching 07.06.2014 to 10.07.2014 (34 working days including all Saturday & Sunday)
06.12.2014 to 08.01.2015 (34 working days including all Saturday & Sunday)
06.06.2015 to 09.07.2015 (34 working days including all Saturday & Sunday)
Class Test 11.07.2014 09.01.2015 10.07.2015 End of the spell 11.07.2014 09.01.2015 10.07.2015
- - 50
� (For M. Tech/ME Regular Programmes)
First Semester (for new students, Batch 2014 – 16) & IIIrd Semester (for students, Batch 2013 – 15)
IInd Semester (for students, Batch 2014 – 16) & IVth Semester (for students, Batch 2013 – 15)
Normal Admission/Registration 16.07.2014 to 17.07.2014 14.01.2015 to 15.01.2015 Late admission to be allowed by the Director NITTTR, with late fee of ` 1,000/-
18.07.2014 to 12.08.2014 16.01.2015 to 19.01.2015
Late admission to be allowed by the Vice Chancellor with late fee as per University rules
13.08.2014 to 29.08.2014
Registration 16.07.2014 to 17.07.2014 14.01.2015 to 15.01.2015 Commencement of Classes 16.07.2014 14.01.2015 Teaching 16.07.2014 to 29.08.2014 14.01.2015 to 25.02.2015 First mid-semester tests 01.09.2014 to 02.09.2014 26.02.2015 to 27.02.2015 Teaching 03.09.2014 to 15.10.2014 02.03.2015 to 13.04.2015 Second mid-semester tests 16.10.2014 to 17.10.2014 14.04.2015 to 16.04.2015 Teaching 20.10.2014 to 27.11.2014 17.04.2015 to 26.05.2015 End-semester examinations 01.12.2014 to 15.12.2014 01.06.2015 to 15.06.2015 Commencement of next semester 14.01.2015 16.07.2015
Schedule of End Semester/Spell University Examinations for M.Tech./ME. Programmes (both Regular and Modular) is subject to approval of Panjab University, Chandigarh.
� PIO QUOTA : NO
M.E. Infrastructural Information
� Classroom/Tutorial room Facilities : Instructional Area for the existing programme(s)
Particulars
Number of rooms Carpet area of each room
Requirement as per norms
Available in the institution
Requirement as per norms
Available in the Institution (Sq.M)
Class Rooms 12 562
Tutorial Hall 02 105
Seminar Hall 04 312
Drawing Hall (*) 02 250
Computer Centre 01 345
Library 01 330
Laboratories & workshops 27 1462
Other/auditorium 01 300
Total 3656
• In addition the institute is in the process of comp leting construction of Lectures Complex of 10 rooms equipped with modern facilities.
• Central Examination Facility, Number of : One Big hall & 12 classrooms, seating rooms
and capacity of each capacity of total 360
- - 51
LIST OF LABORATORIES, MAJOR EQUIPMENT/ FACILITIES AVAILABLE FOR EXPERIMENTAL SET UP :
Engineering & Education (Education and Educational Management Deptt.)
Computer Laboratory:
- 16 Computer Systems with internet for M.Tech. Engg. Education students,
- LCD Projector, Overhead Projector
- SPSS Software
- - 52
Mechanical Engineering (Manufacturing Technology) D eptt. (Major Equipment of the Laboratories of the Mechani cal Engineering Department)
Name of laboratory Major facilities
CAD / CAM & Robotics H/W : Server – 1, Systems – 20, Digitiser-1, CNC M/c Trainers – 2, Robot – 1S/W – AUTOCAD, MDT, CATIA, IDEAS, ANSYS, MasterCAM, Pro-E Wildfire 2.0, INVENTOR.
Metrology Lab. Basic Measuring Instruments, Ultrasonic Flaw Detector, Ultrasonic Thickness Gauge, Force and speed Measurement Kits, Computer systems, thermo couple, thermometers, Eddy Current Flaw Detector, Magnetic Particle Crack Detector, Microprocessor based profile projector.
Machine Tool Lab. Lathes – 03, Shaper – 01, Milling Machine – 01, Tool and Cutter Grinder – 01, Surface Grinder – 01, EDM – 01, Shaper -1, Hacksaw m/c – 1, Experimental kits, Dynamometers – Lathe / Drill / Milling, Ultrasonic Drilling M/c – 1, TIG/ MIG Welding set – 1.
Material Testing Lab. Metallurgical Microscope – 02, Material pro software – 01, Micro hardness tester – 01, Cut off m/c – 01, UTM – 01, Sample mounting m/c – 01, Sample Cutting m/c – 1, Flaw Detector, Computer based Rockwell cum Brinell hardness tester, spectro-photo calorimeter, Electric Furnace – 3, Oven-1, Izod Impact Testing m/c – 1, Jomny End Quench Tester – 1, Wear test rig – 01.
Thermal Engg. Lab. Engine testing rig for diesel engine, Engine testing rig for petrol engine, cut models, experimental kits, Exhaust gas nalyzer.
Mechatronics Lab. Computer Systems – 16, Mechatronics training kit, simulation software, dSpace data acquisition card, automation studio software, MATLAB software, Electro Pneumatic set up, Micro-controller based mechatronics system.
Refrigeration & A/C Lab. Working models for RAC equipment, Cut models of equipment, RAC test equipment.
- - 53
Civil Engineering (Construction Technology & Manage ment) Department
Name of the Laboratory
Plinth Area
(sq. m.)
Computer Applications Lab.
Environmental Engg. Laboratory
Concrete Laboratory
Hydraulics Laboratory
Soil Engg. Laboratory
Highway Engg. Laboratory
Material Laboratory
Non Destructive Testing lab.
30
69
62
41
67
42
54
20
CONCRETE TECHNOLOGY LABORATORY
(List of Major Equipments)
Riffler; Slump Cone; Compacting Factor Apparatus; Air Permeability apparatus; Platform weighing scale(300 kg cap.); Thickness gauge for determination of flakiness index; Length gauge for determination of elongation index; Steel Platform, Trolley Capacity 300kg; Counter Scale balance with rounded shape brass pans; Concrete beam moulds 15 x 15 x 70 cm; Rupture test Attachment to test concrete beams; Toshniwal digital ultrasound concrete tester; Vee-Bee Consistometer; Vibrating table; Needle vibrator(Electrically operated); Sieve Shaker; Soundness Apparatus; Microcovermeter; Cement cube vibrating machine; Concrete test Hammer; Vicat’s Apparatus with Dashpot; Muffle Furnace; Electronic digital Weighing scale cap.30 kg; Concrete test hammer NR type (swiss made); Concrete test hammer pendulum type; Ultrasonic Instrument Tico complete; Electronic Universal testing machine; Automatic Compression Testing Machine 3000 kN; Tile abrasion testing machine; Water bath Rectangular; Cement Autoclave; Humidity Cabinet; Pulverizer; Crushing Value Apparatus 150 mm dia; Aggregate Crushing Value Apparatus 75 mm dia; Aggregate Impact Value Apparatus; Air Entrainment Meter 0.01 m3 for Agg upto 75mm size; Concrete Permeability Tester; Flexural Testing Machine.
- - 54
SOIL ENGINEERING LABORATORY
Sampling outfit heavy duty; Field Inspection Vane Tester; Permeability Apparatus; Electronic Balance(Digital) 10 kg capacity; Soil Sampling Auger, Blade Type 100 mm dia with Tee piece; Vicksburg Penetrometer; Shrinkage Limit Apparatus and density bottles; Universal Cone Penetrometer with timer; Standard Proctor Compaction mould; Liquid Limit Device with blow counter; Direct Shear Apparatus electrically operated; Vane Shear Apparatus (Lab) hand operated; Thermostatically controlled electric oven 18” * 18”; Field density App.(Sand replacement method; Consolidation App (Three Gang Electronic); A.S.T.M Improved soil Hydrometer 60g; Core Cutter Complete; Abbot Compaction Apparatus(Metric); Proctor needle(Hydraulic type); Soil Trimmer; Consolidation test apparatus; Anamed Electronic Top Loading balance; Electric Model Oven (605 x 605 x 605 mm); Pycnometer; Rapid Moisture Meter; Pocket Penetrometer AIM-037; Piston Sampler Stationary Type; Field Density kit; Soil Resistivity Meter; Relative density apparatus; Unconfined compression testing machine; Standard penetration apparatus; Automatic Compactor for soils; Desiccators 250 mm dia; Modified Proctor Mould (Gunmetal); Consolidation App (Three Gang Electronic); Direct Shear Test Electronic; Core Cutting and Grinding Machine; Brazillian Test Apparatus; Diamond Core Drilling Machine; Sample Extruder, Electrical operated.
HIGHWAY ENGINEERING LABORATORY Pavement Dynamic cone penetrometer; Ductility testing machine; Ring & Ball Apparatus for softening point of bitumen; Flash Point apparatus; Water bath; Standard Penetrometer; Marshall stability test apparatus; Modified Marshall Apparatus; Aggregate Impact value test; Aggregate Crushing Value Apparatus- 150 mm 75 mm; Los Angeles Abrasion testing Machine; Automatic Compactor for Bituminous mixes; Standard Viscometer; Thickness Measuring Device; Profiligraph; Bitumen Content Measuring App(Electrically Operated); Laboratory CBR Apparatus; BR Apparatus (Field Type); Benkelman Beam with carrying case; Hot Air Oven 605 x 605 x 910 mm; Hardness Number Apparatus; CBR Moulds for Automatic Compactor; Electronic Outfit for CBR Apparatus; Electronic Weighing Scale 20 Kg; Deep Freezer, Vertical Type; Bump Integrator (Tow away); Alignment Meter; Stripping Valve apparatus; Pressure Aging Vessel..
- - 55
Environmental Engineering Laboratory
pH Meter (Century); TDS/Conductivity Meter (Century); Water Analysis Kit; Dissolved Oxygen Meter (Naina Eltx.); Microprocessor Controlled Dissolved Oxygen Meter (Eutech, Singapore); Colorimetr/Filter Photometer (Elico); Chloridemeter/Filter Photometer (Elico); Jar Test Apparatus (Secor); Membrane Filter Assembly (Millipore); Kits for Fluoride, Nitrate and Phosphate (HACH, USA); Residual Chlorine Kit; Spectrophotometer (Systronics); Flame photometer (Systronics); Colorimeter (Lamotte, USA); ISE Meter (Orion, USA); Ion Chromatograph (Metrohm, Switzerland); Atomic Absorption Spectrophotometer (Perkin Elmer, Switzerland); COD Digestion Apparatus (Spectralab); BOD Incubator(NSW); Bacteriological Incubator (NSW); Autoclave (NSW); Steri Laminar Air Flow Cabinet (ACCO); Soxhelt Apparatus; Centrifuge (Remi); Mini Rotary Shaker (Remi); Water Bath (Yorco); Colony Counter (DCC-100); Hot Air Oven with Digital controller (NSW); Five stage Reverse Osmosis System; Digital Temperature Indicator; High Volume Sampler (Dwarf); Handy Air sampler (Envirotech); CO/HC analyzer (Hermann); Multigas Analyser (Multilog 2000,USA); Sound Level Meter (Cygenet); Microprocessor based portable pH Meter; Microprocessor based Conductivity Meter; Nephlometer; Digital Burette, Multiparameter Troll, Rapid Coliform Test Kit., UV Spectrophotometer.
Hydraulics Laboratory
Pigmy current meter along with accessories; Reynold’s apparatus for demonstration of streamlined and turbulent flow apparatus; Precision type, Prandle, pitot tube nickel plated to measure the total pressure head and velocity head and static head with calibration chart to read velocity; Differential manometer for measurement of difference of pressure; Model of turbine pump; Pelton wheel with friction brake; Centre of pressure apparatus; Hydraulics Bench; Close circuit losses in pipe apparatus; Centrifugal pumptest rig(model); Peristatic Pump; Bernoulli’s Theorem Apparatus.
Non Destructive Testing Lab/Material Laboratory
Moisture Meter (Digital); Core Cutting Equipment; Paint Pressure Tester; Scratch Hardness Tester; Flexibility and Adhesion Tester; RCT Rapid Chloride Test Kit; Corrosion Analysing Instrument, Carbonation Kit; Perfometer for reinforcement details; Concrete test hammer NR type
- - 56
(swiss made); Concrete test hammer pendulum type; Ultrasonic Instrument ; Ultrasonic Thickness Gauge; Crack width Meter; Laser Distance Meter.
Surveying/Remote Sensing
GIS Handsets, Total station, Micro-optic, Theodolite, Auto level, Dumpy Level, IDP Level, Vernier Theodolite, some Basic Surveying Instruments, Map tufo software, Terranodal software to be used in conjunction total station.
Computer Science & Engineering Department
1. Laboratory : Class Room No. 108
Total System : 23
Pentium IV (HCL) @ 1.5 GHz with 400 MHz system Bus - 03 Nos: Pentium IV(ACER) @ 2.4GHz with 400 MHz system Bus – 20 Nos LCD Projector, Make: SANYD-1 No., PS APC 5KVA-1 No.
2. Computer Lab : Room No –102
Total System : 20
HCL [email protected] GHz- 5 Nos: Pentium IV HP @1.5 GHz with 533/800- MHz System Bus-15 Nos. OHP Projector-1 No., LCD Projector, Make: SANYD-1 No, Qualnet Server Infinity HCL – 01 No.
- - 57
3. Laboratory : Computer Center
Total System : 10
Pentium IV (HCL) @2.8GHz. with 800 MHz. FSB-10 Nos: Switches Ethernet Hub Micronet SP-1659A -3 Nos. ETHERNET HUB – Dlink-1 No. ; SWITCHES Sure Com-1 No: UPS 2.2 KVA (APC)-1 No.
4. Laboratory : Maintenance Section
Total System : 02
HCL – Pentium IV @ 2.8 GHz -1 No. HUB 3 COM-1 No.; and TPLINK Switch 1 No.; HP Pentium-01 No.
5. Laboratory: Server Room No. 114
1. DHCP and Proxy Server Dual on X 3650 Server (Single XEON) with 2 GB RAM, 3x 71 GB HDD on NEBERO CMS; Web Server on x 3650 Server (Dual XEON) with 2 GB RAM, 3 x 72 GB HDD on RED HAT LINUX
2. Window 2003 Server on X 3850 (QUAD XEON) with 8GB RAM, 3x72 GH HDD 3. LINUX based- Mail sever on X 3650 server (Dual XENON) with 2 GB RAM, 3 X 72 GB
HDD on RED HAT LINUX 4. Pentium IV – Intranet Server on Pro BL 1200 Desktop with 512 MB RAM plus 160 GB HDD 5. Pentium IV- Monitoring unit on Pro BL 1200 Desktop with 512 MB RAM plus 160 GB HDD 6. Dual XENON Global line – (standby) DHCP plus proxy server with 1 GB, 3x 36 GB HDD on
LINUX open source 7. Room CISCO 2811 at rack 8. Room CISCO 1600 at rack (standby)
- - 58
9. 19’’ 42U standby racks-2 10. Switches- HD Pro curve switch 24 port + SFP-01 DLINK (DMZ) 11. 3 KVA ONLINE (TATA LEIBERT) – 2 NO on each rack. 12. 3 KVA online (BPE) - 1 No. for INTRANET and Monitoring unit.
6. Laboratory: Student Training Lab
Total System: 06
Pentium IV HP - 2 Nos.; Pentium IV HP @ 2.8 GHz with 800 MHz. FSB-3Nos. Pentium IV(HCL ) @ 1.6GHz – 1 No.; 24 port 10/100 Mbps Switch - 1 No. Thin Clients - 9 Nos.
7. INTERNET ACCESS R.No. 110
Thin Clients: 11
- - 59
Electrical Engineering (Instrumentation & Control) Department
Laboratories associated with Department
Sr. No. Name of the Laboratory Plinth Area (m 2) 1. Machines Laboratory 110
2. Power Electronics 50
3. Instrumentation & Control 50
4. Computer Centre 40
INSTRUMENTATION & CONTROL LABORATORY
LVDT Based Displacement transducer DX 25, 2 Nos. Strain guage based displacement transducer DXS 25, 2 Nos. Digital Universal indicator DA-05U, 2 Nos. DC Dual output power supply Pacific 305D, 1 Nos. DC Single output power supply Pacific , 2 Nos. Aplab signal generator 2014, 1 Nos. Load cell LU1-50K, 1 Nos.3 ½ digit LCD Autoranging multimeter 9A, 4 Nos.3 ½ digit LCR Meter MECO, 2 Nos.3 ½ digit LCR Meter MECO, 2 Nos. Bench Top 4 ½ digit multimeter MECO 45P, 1 Nos. Digital Insulation Tester DIT90 MECO, 2 Nos. Digital Multimeter, DM-454 MOTWANE, 1 Nos. Bread Board, 1 Nos. Microprocessor training kit (VMC 8506) Microprocessor kit VMC 8603, 2 Nos.1 Nos. Scientech-Oscilloscope 201FC, 1 Nos. Calibration Bench with dial guage for alibration of LVDT’s/strain guage based transducers 0-25mm , 4 Nos.DOT Matrix Printer, EPSON, LQ-300, 1 Nos. ‘PROTEK’ 3 ¾ Digit Digital Multimeter, 506, 2 Nos. ‘PROTEK’ 3 ¾ Digit Digital Multimeter, 506, 2 Nos. Process Control Trainer ICON-97, 1 Nos. Portable Load Management System ALM 1, 1 Nos.20MHZ CRO 201CT, 1 Nos. ADAM 4520ADAM-4018ADAM-4080DPWR-243, Scientific function generator HM-5030-2, 1 Nos. Soldering Station 456 Xytronics, 2 Nos.16 bit Microprocessor kit 8086, 2 Nos.TMS 320 C31 based DSP starter kit, 1 Nos.TMS 320 C54 based DSP starter kit, 1 Nos. DIGIAC 1750 transducer trainer, 1 Nos.PC-45 PLC Trainer, 1 Nos.8051 based micro controller kit with power supply , 3 Nos. Direct Digital Control, 1 Nos. Analog Control system, 1 Nos. Process Control Unit + Level sensor PCU2L, 1 Nos.UPS 1KVA Offline, 1 Nos. Carrier make window AC , 4 Nos. Voltage Stablizer 4KVA, 4 Nos.Intel Pentium-III 800MHz (MIllenium), 1 Nos. Hand Held Scope meter, 1 Nos. Circuit maker 2000 software, 1 Nos. MATLAB Software, 1 Nos.UPS 500VA APC AVR 500, 2 Nos. Bytronic make PLC & module, 1 Nos. Medical Instrumentation Trainer, 1 Nos. KEIL PK51 Software , 1 Nos. Window XP Professional OEM, 10 Nos. Windows 2000 Professional OEM, 1 Nos.VCL-1, Virtual Control Software, 1 Nos. Ladder Logic Software, 1 Nos. Elletronica veneta software, 1 Nos.VAB DSP Education Software with HSWN 0467 and TMSDS320C06711, 1 Nos. PCI DAQ board PCI-703, 1 Nos. PCI DAQ board PCI-730, 1 Nos. HP Laserjet 1150 Printer , 2 Nos.MS Office 2003 Educational pack, 1 Nos. Micro controller simulation software Proteus VSM, 1 Nos.PCI 6013 DAQ cardPCI 6014 DAQ cardLabview 7 full Development system, 1 Nos. UNITOOL-CAD software, 1 Nos.PCB Mounting Hall effect transformerHTP-25HTP-50HTP-100S, 3 Nos.NI PCI -6220 data Acquisition Board, 1 Nos.PSCAD4 software, 1 Nos.HUB 16 port 100 mbps micronet, 1 Nos. Visual studio.net pro 2003, 1 Nos. Laser Printer Samsung ML2150, Nos. Visualization Software, 1 Nos. Tranducer Parameter Analyser Model IA-TPA, 1 Nos. PLECS-Software, 1 Nos.PCC4 PCI Interface Card for PCU rig, 1 Nos. PCUSIM – PCU ring simulator 10 user, 1 Nos. Radio Frequency Analyser Board, 1 Nos. GSM Mobile Application Board, 1 Nos. Universal Microcontroller Development Package, 2 Nos. Separate Interfacing Application Module, 2 Nos. PSIM- Simulation SW for Power Eltx. 5 User, 1 Nos. Photonics CAD Optical Transmission Software , 1 Nos.HCL Infinity Pro BL 1200 with TFT monitor , 12 Nos. Data Aqs. System DAS – MG01, 01 Nos.4’ X 6 ’ Projection Screen BRAUN make, 01 Nos.BPE 3 KVA Online UPS system , 02 Nos.HP Compaq LAPTOP NX 6320 , IGB RAM (total), 01 Nos.PLC with interface cable (Dreamz Automation), 01 Nos. Software Package for PLC TLX CD PL7M44M, 01 Nos. Desktop PC HP Dx 2280 ( Classroom), 01 Nos. LABVIEW Software Batch M64X59285, 01 Nos. HP Desktop DX 7380 , 04 Nos. HP CLJ 2600N Printer, 01 Nos. Laptop HP 6710b ( 3 yrs warranty), 01 Nos. HP LJ 3005 DN Laser Printer, 01 Nos. Wipro Desktop PC , 04 Nos. SONY VPL-CX76 LCD Projector, 01 Nos.NI Elvis / PCI 6251 Bundle Batch HA 6389911, 01 Nos. Digital Visual Presenter , DP 6650 A, 01 Nos. HP DC7000 Desktop , 08 Nos. Dell Latitude E5500 Laptop, 03 Nos. Mathworks Suite with Tool Boxes, 35 user Nos. Universal Programmer 48 PIN USB based, 01 Nos.MS office 2007 Paper License , 08 Nos. Emerson Online UPS 3 KVA , 01 Nos. HP DC 7000 Series Desktop Intel Vpro Config., 10 Nos.APC UPS 3 KVA Online , 01 Nos.NI ELVIS II and other supporting modules ( Labview Academy)NI ELVIS II + Circuit Design Bundle ( For Academic Use Only), 03 Nos. Power Cord, 240V, 10A, North American , 03 Nos. LabVIEW Academy Course Preparation Materials, 01 Nos. LabVIEW Academy Student Workbook
- - 60
for Student use with LV Academy Programme. 01 Nos. Quanser QNET Mechatronics Sensor Board for NI ELVIS Acd Only), 01 Nos. Vernier Bioinstrumentation Sensor Kit for NI ELVIS II , 01 Nos. Quanser QNET DC motor control board for NI ELVIS (Acad Only), 01 Nos. Quanser QNET Rotary inverted Pendulum Bd for NI ELVIS (Acad Only), 01 Nos. Quanser QNET HVAC Trainer Board for NI ELVIS (Acad Only), 01 Nos. Freescale NI ELVIS Microcontroller Prototype Board, 01 Nos.Vernier Green Engineering Sensor Kit for NI ELVIS II, 01 Nos. Emona ETT-211 FOTEX-Fiber Optic Comm Trainer for NI ELVIS, 01 Nos. Computer Notebook i5 with windows 7 CNU 1452x6x, 01 Nos. Embedded Development Package with tools, 01 Nos. Unscrambler x Software, 01 Nos.
ELECTRICAL MACHINES LABORATORY
Cut view Model (Electric Motor)’ DC Series Motor 2HP 220V, 1000/1500rpm; PSG 3 KVA Alternator 1500 RPM, S.N. 146058; PSG 5-8 HPAC Variable speed motor 600/1250; PSG Slipring Ind. Motor 5 HP, 3 Ph; 1440 RPM; PSG DC Generator 220V, 18A, 1500RPM; DC Motor 5 HP, 220V, 1450 RPM; DC Generator 2 KW, 220V, 1450 RPM; DC motor BTH 3 HP, 220V, 1450 RPM – 2Nos; DC Compound Generator 5 HP, 1450 RPM, 220V; Crompton AC Motor 7.5HP, 1440RPM; 3 PH; AC Ind. Motor 3 PH, 440V, 3HP, 1420 RPM; AC Motor 4/2 HP 440V, 1390/750 RPM; Gautam Unwound Motor 5HP 1420 RPM, 440V; Transformer 230/12V 50 VA, S.no. 74627; Transformer 230/12V, 100 VA, S.no. 74857; Transformer 230/12V, 150W, S.no 74522-23 – 2 Nos; Motor 1 Phase 1/12 HP, 5000RPM, S.No. TC 1539; Motor 1 Phase 1/15HP, 1275RPM, S.No 12762; Motor 1 Phase 1/5 HP, 930 RPM, S.No H68376, Motor 1 Phase 1/8 Hp, 930 RPM, S.No. 5J2391; Universal DC Motor ¼ HP Demonstration Type: DC Starter 5HP S.No 1305/75, 1310/75 – 2Nos; DC Motor 5 HP, 220V, 1450RPM, S.no 42252; Alternator, 5KVA, 400/230V, 3Ph;1500RPM, 12389; WolfDrill m/c 1/4", S.N. B 148711; Universal Motor 1/8 HP 230V, S.No SMM 18131; Armature Growler Elak Make; Motorised Oil TestSet Input 220-250, Out 0-60KV; Meco Digital tong Tester Model 2200; Digital Multimeter Motwane DM353 S.No. 990391 Clipon Type Power Factory Meter, Riken; Clipon Type AC Wattmeter 20/200KW, Riken; Analog Clamp Meter Model 2103, Japan Make; Digital Insulation Tester DT 920; LUX Meter LUTRON Make, Model 101; IEEC Universal Digital AC Drive; Induction Motor 3 Phase 5 HP, 440 volt, Cont, Rating coupled with DC Shunt Gen, 220V, 18A; Digital Multimeter Rishabh 16S & S1232 Module; Infrared Non Contact Thermometer Raytek / MT4; PLCP-R Thyristor Controlled Rectifier S.no. 592K, Process Logic Controller for the Meas of temp., Non contact type Earth Resistance tester, Liminary Parameter Analyser, Power factor Measurement and correction provider, Electrical Motor Design Software, AC Servo Trainer, 3 phase power quality analyser Fluke, DSO Agilent, Mipower software.
POWER ELECTRONICS LABORATORY
Dimmer Type 15D, Electric Blower Plus Suction Attachement; Aplab Model 3131, 15Mhz Dual Trace CRO Sr. No. 984/985, Motware Multimeter Model 8X MKRIII – 2 Nos., Aplab Model 3131, 15Mhz Dual Trace CRO Sr No 487/2196; Aplab Model 3131, 15 MHz Dual Trace CRO Sr No 288/132; Aplab Regulated Power Supply Model No 7112 30V/0-2Amp–4 Nos;, Component Storage Cabinet;, Regulated DC power supply single channel agronic make model 92B; Solderless Bread Board Built in Supply, Model GFI-27; Solderless Bread Board Model No GEI 106-2 Nos; 3 Phase 6 SCR Bridge Firing Unit – Model TPSF; Steppler Motor Control with Motor ET-Thyset-23MR; Scientific LCRQ Bridge MODEL 6018 (Sr. No 89344); Hameg 40 MHz Digital Storage Oscilloscope HM 407 Sr. No. Z-7139, Clamp On power Meter Model 4500 Make MECO, UPS 625VA, Microprocessor Controlled Line Interactive with AVR; 10 MHz Function generator Model MX 9810. Multi Transducer Model M-42, Make Rishab – 2 Nos; Accelerometer & Signal Conditioning Module Type MV-410 (B), Operating System Window XP Professional Edition – 2 Nos; UPS 500VA Offline Interactive (Wipro Make) – 9 Nos; DSP Trainer Kit model WZ-DSPORT-5.0 & Compiler ADSP21060, Software Dasy Lab DLABPD6-02, Single Version Latest Version, ADD ON CARD PCI 1710; WICE 8052 IN-Circuit Emulator; Switch HUBD link 8 port 10/100 Mbps, Partion Magic Software.V-ELEQ Virtual electrical equipment simulator, live wire design and simulator SW, 20MHz Dual Trace CRO power scope model ST 224. CADDO Micro controller based CRO, Model CADDO-803. Digital logic trainer controller Model ACS-DLTC, Computer PC, Printer HP 1536, hand hold multimeter fluke-10 Nos.