Golden Jubilee Celebrations Abstracts of the International Conference on Industrial Engineering

Golden Jubilee Celebrations Abstracts of the International Conference on

Industrial Engineering ICIE 2011

www.excelpublish.com

Golden Jubilee Celebrations Abstracts of the International Conference on

Industrial Engineering ICIE 2011

November 17–19, 2011

Editors Prof. Tushar N. Desai

Dr. Ravi Kant

Organized by

Department of Mechanical Engineering S.V. National Institute of Technology Surat–395007

In Association with • Indian Institution of Industrial Engineering (IIIE), NHQ-Mumbai • Department of Science and Technology, New Delhi • Council of Scientific and Industrial Research (CSIR), New Delhi

EXCEL INDIA PUBLISHERS

New Delhi

First Impression: 2011

© SVNIT, Surat

Abstracts of the International Conference on Industrial Engineering ICIE 2011

ISBN: 978-93-81361-54-2

No part of this publication may be reproduced or transmitted in any form by any means, electronic or mechanical, including photocopy, recording, or any information storage and retrieval system, without permission in writing from the copyright owners.

DISCLAIMER

The authors are solely responsible for the contents of the papers compiled in this volume. The publishers or editors do not take any responsibility for the same in any manner. Errors, if any, are purely unintentional and readers are requested to communicate such errors to the editors or publishers to avoid discrepancies in future.

Published by EXCEL INDIA PUBLISHERS 61/28, Dalpat Singh Building, Pratik Market, Munirka, New Delhi-110067 Tel: +91-11-2671 1755/ 2755/ 3755/ 5755 Fax: +91-11-2671 6755 E-mail: [email protected] Website: www.excelpublish.com

Typeset by Excel Publishing Services, New Delhi-110067 E-mail: [email protected]

Printed by Excel Printing Universe, New Delhi-110067 E-mail: [email protected]

Conference Organizing Secretaries

Prof. Tushar N. Desai Associate Professor Department of Mechanical Engineering, SVNIT, Surat, India

Dr. Ravi Kant Assistant Professor Department of Mechanical Engineering, SVNIT, Surat, India

Members

Shri Dinesh Kumar Asst. Professor, MED, SVNIT

Shri S. Pandaya Asst. Professor, MED, SVNIT

Shri A.H. Ippa Hon. Sec., IIIE Mumbai

Shri S.S. Dipnaik Member, IIIE Mumbai

Director’s Message

I am delighted to note that the Department of Mechanical Engineering of Sardar Vallabhbhai National Institute of Technology (SVNIT) Surat is organizing International Conference on Industrial Engineering (ICIE 2011) which is scheduled to be held during November 17-19 2011. This conference is organized in association with ‘Indian Institute of Industrial Engineering (IIIE)’, National Headquarters, Mumbai.

ICIE 2011 is concerned with most recent development in the field of industrial engineering. The present three-day is designed to provide a common platform to the experts and delegates to share their experiences, research ideas and discuss various related issues and challenges.

I believe that ICIE 2011 will provide an international technical forum for academicians, researchers, industry, organizational leaders, government and non-government representatives, management consultants and service providers to meet and exchange new ideas and present their findings of on-going research in various areas of industrial engineering.

I am sure that the technical papers of the conference give an opportunity to rapidly disseminate research results that are of timely interest to the engineering fraternity. I warmly welcome all the participants for the fruitful technical sessions.

I heartily congratulate to the organisers of ICIE 2011 and give best wishes for the success of the conference.

Dr. P.D. Porey

October 20, 2011 Director

Registrar’s Message

I am pleased to note that the Mechanical Engineering Department of Sardar Vallabhbhai National Institute of Technology (SVNIT), Surat is organising an International Conference on Industrial Engineering (ICIE 2011) which is scheduled to be held during November 17-19 2011.

I believe that the ICIE 2011 will encourage the participants from academics, research and industries in the field of industrial engineering. Industrial Engineering is the efficient production of industrial goods as affected by elements such as plant and procedural design, the management of materials and energy, and the integration of workers within the overall system. This conference is focused on integrating people, technology, and information to enhance a global growth.

I am sure that ICIE 2011 will be useful for researchers, scientists, engineers, and scholar students to exchange and share their experiences, new ideas, and research results about all aspects of Industrial Engineering. I would like to extend my welcome to all the participants.

SVNIT has marked its presence as a leading research and teaching Institute at global level. Its strengths and reputation are best evidenced by the excellence of the national and international students admitted in various programs and well qualified faculty. The Institute is committed to promoting talent at National and International levels.

I wish ICIE 2011 a grand success.

Shri H.A. Parmar October 20, 2011 Registrar

Head of Department’s Message

I am happy to note that the Department of Mechanical Engineering of Sardar Vallabhbhai National Institute of Technology (SVNIT) Surat is organizing International conference on Industrial Engineering (ICIE 2011) in association with ‘Indian Institute of Industrial Engineering (IIIE)’, National Headquarters, Mumbai, which is scheduled to be held during November 17- 19 2011.

Industrial Engineering is the one of important specialization of Mechanical Engineering. It deals with the design, improvement, and installation of integrated systems (as of people, materials, and energy) in industry. I suppose that the ICIE 2011 will bring academic, scientists, leading engineers, industry researchers and scholar students to exchange and share their experiences and research results about all aspects of Industrial Engineering, and discuss the practical challenges encountered and the solutions adopted.

The Department of Mechanical Engineering was established since the inception of college (1961). The department offers an undergraduate, five post graduate courses and Ph.D programme in all the disciplines of Mechanical Engineering. The department has at present more than 40 faculties and more than 1000 student. Apart from regular teaching, the department is actively engaged in testing, consultancy, and research and development services to support various industries in and around Surat.

I would like to welcome all the participants in Department of Mechanical Engineering. The departmental laboratories are open for visit during the working hours.

I give best wishes for the success of the conference.

Dr. H.B. Naik October 20, 2011 Head of Department

Message from the Conference Chief Advisor

As the Chief Conference Advisor of ICIE-2011, I am greatly delighted that the Mechanical Engineering Department of SVNIT Surat in association with Indian Institution of Industrial Engineering (IIIE) has done marvellous work in organising the ICIE-2011 from 17-19, November.

Industrial engineering has evolved over the last century, constantly moving into new applications and industries using new tools—while never leaving its traditional industries. This Conference is aimed at discussing the emancipating dimensions of industrial engineering discipline, which has made progress during the last few decades. The industrial engineer (IE) has long concerned the profession because the term industrial may have been defined too narrowly. There may be other words starting with the letter ‘I’ that better capture the diversity of industrial engineering, including innovation, information, integration, implementation, instruction, involvement, and intrapreneur. Therefore, this Conference tries to expand the focus of the industrial engineering profession by recognizing that the ‘I’ in IE may stand for many more things than the traditional term, Industrial.

I understand that more than 200 papers will be presented in 37 technical sessions in this conference and delegates will be participating from about 10 countries across the world. In summary, I can proclaim here that our industrial engineering professionals from academia, industry, government and service sector etc. have become responsive to the society’s needs, have been adept at creating or advancing new technical tools and have advanced the knowledge frontiers of industrial and systems engineering discipline. I am having confidence that the participants of this conference will make productive efforts to transfer, disseminate and communicate the new and ever expanding dimensions of Industrial Engineering.

I congratulate specifically to Prof. P.D. Porey-the Director, Shri H.A. Parmar-the Registrar, Prof. T.N Desai and Dr. Ravi Kant and many others for their continuous and sustained efforts in making the conference a successful one. I also convey my best wishes to the delegates, faculty members and other associates for their valued contributions to ICIE-11.

Dr. R.P. Mohanty

Chief Advisor-ICIE 2011 and

Vice-Chancellor, Siksha ‘O’ Anusandhan October 20, 2011 Bhubaneswar–751030

IIIE Chairman’s Message

I am pleased to note that the Department of Mechanical Engineering of Sardar Vallabhbhai National Institute of Technology (SVNIT) Surat in collaboration with Indian Institution of industrial engineering Mumbai (IIIE) is organizing International conference on Industrial Engineering (ICIE 2011), which is quite important and relevant theme for the Indian Industries and academia in global context.

ICIE 2011 is a platform to bring researchers and experts from academia and industry on a common platform for discussing the latest technologies and managerial tools being adopted in the field of Science, Technology and Management. It will help to provide an opportunity for all branches of industries, to disseminate the information on most recent and relevant research, theories and practices in the area of Industrial Engineering.

I am sure that large number of distinguished speakers and delegates attending this conference would endeavor to deliberate on innovative ideas, contributing from their rich experience, in depth knowledge and success.

Organizing this type of conferences requires great amount of vision, leadership and dedication. I compliment SVNIT Surat and IIIE Mumbai for achieving this successfully.

My warm greetings to the distinguished speakers, delegates and all participants!

Commander Bhaskar M. Bhandarkar

October 20, 2011 Chairman, IIIE

Message from the Conference Organizing Secretaries

Prof. Tushar N. Desai Dr. Ravi Kant

The International Conference on Industrial Engineering (ICIE 2011) is scheduled to be held during November 17-19 2011. ICIE 2011 is a platform to bring researchers and experts from academia and industry on a common platform for discussing the latest technologies and managerial tools being adopted in the field of Science, Technology and Management. It will help to provide an opportunity for all branches of industries, to disseminate the information on most recent and relevant research, theories and practices in the area of Industrial Engineering.

There has been overwhelming response to the call for papers from the researchers, academicians of the leading institutes and organisations all over the world. The papers present theoretical research results and application case studies. They range from mathematical modelling and simulation to industrial applications and management

We would like to thank the reviewers and members of international advisory committee, faculty members of the department of mechanical engineering for their assistance and seriousness. We are very grateful to all authors and session chairs for contributing actively in this conference. We should acknowledge the students volunteers for their assistance.

We are extremely thankful to Council of Scientific & Industrial Research (CSIR), New Delhi, Department of Science and Technology (DST), New Delhi and Larson and Toubro (L&T) Hazira, Surat for extending their financial support to ICIE 2011. We are also thankful to ‘Indian Institute of Industrial Engineering (IIIE)’, National Headquarters, Mumbai for extending their valuable support to the conference.

We are extremely thankful to Dr. P.D. Porey, Director of our institute for their constant support and encouragement in making this international conference a success. We are also pleased to Shri H.A Parmar, Registrar of our institute for providing us smooth administrative support in making this international conference a grand success. We are also thankful to the Deans, Head of Departments, Hostel section and Estate section for various support required time to time.

Prof. Tushar N. Desai and Dr. Ravi Kant Associate Professor and Assistant Professor,

Mechanical Engineering Department Sardar Vallabbhai National Institute of Technology (S.V.N.I.T.),

October 20, 2011 Surat–395007, Gujrat, India

Organizers & Committee

Chief Patron Dr. P.D. Porey Director, SVNIT, Surat, India Conference Advisor Dr. R.P. Mohanty ITM Group of Institutions, Mumbai, India Patron Shri H.A. Parmar Registrar, SVNIT, Surat, India Orgaizing Secreatry Prof. Tushar N. Desai Associate Professor Dr. Ravi Kant Assistant Professor

Conference Advisory Committee Prof. Aida Sy Manhattan College, USA Prof. Andrew Yeh-Ching Nee National University of Singapore, Singapore Prof. Antonio J. Verdu Miguel Hernández Universitas, SPAIN Dr. A. Subash Babu IIT Mumbai, India Dr. A.K. Behera Knowledge Trust Bhubaneswar, India Dr. A.M. Agrawal WCST, Muscat Dr. Ashok Nayak Accenture, USA Prof. Atanu Ghosh IIM Ahmedabad, India Prof. A. Gunasekaran University of Massachusetts, USA Shri Atik M. Desai L&T Surat, India Dr. Bharat Bhaskar IIM Lucknow, India Dr. B.E. Narkhede Editor, IE Journal, India Cdr. B.M. Bhandarkar Chairman, IIIE Mumbai, India Prof. David Bennett University of South Australia, Australia Dr. D.K. Banwet IIT New Delhi, India Prof. D.K. Malhotra Philadelphia University, USA Dr. G. Kanabiran NIT Trichy, India Prof. G.D. Thakkar SGSITS Indore, India Prof. John Wang Montclair State University, USA Dr. J.P. Modak PCE Nagpur, India Mr. J. Dasgupta PCS Mumbai, India Prof. Jonathan Liu Regent's Business School, UK Prof. Kannan Govindan University of Southern Denmark, Denmark Dr. Kripa Shanker Vice-Chancellor UPTU, India Prof. Kai Cheng School of Engg & Design, Brunel University, UK Prof. Kurt Engemann Hagan School of Business, USA Dr. L.S. Ganesh IIT Chennai, India Prof. Leo Paul Dana University of Canterbury, New Zealand Dr. M.D. Singh MNNIT Allahabad, India Mr. M.P. Srivastava Head-QMS, ESSAR Surat, India Dr. M.K. Tiwari IIT Kharagpur, India Dr. M.K. Barua IIT Roorkee, India Dr. Narendra K. Sharma IIT Kanpur, India Prof. Niaz Ahmad National Textile University, Pakistan Prof. O.P. Yadav University of North Dakota, USA Prof. Nicholas O'Regan University of the West of England, UK

xiv Organizers & Committee

Dr. P.P.C. Rao Schneider Logistics, U.S.A Prof. P.K. Mishra MNNIT Allahabad, India Prof. P.L. Joshi University of Bahrain, Bahrain Dr. Pradeep Kumar IIT Roorkee, India Mr. Pinaki P. Mohanty TCS Mumbai, India Prof. Rajagopal EGADE Business School, ITESM, Mexico Dr. Rajendra Singh BMLTDA, Brazil Dr. Ravi Shankar IIT Delhi, India Dr. Rakesh Narain MNNIT Allahabad, India Dr. R.C. Gupta SGSITS Indore, India Dr. R.L. Shrivastava YCCE Nagpur, India Prof. Satyendra Singh University of Winnipeg, CANADA Prof. Su Mi Dahlgaard Park Lund University, Sweden Dr S.G. Deshmukh Director, ABV-IIITM Gwalior, India Dr. S. Rangnekar IIT Roorkee, India Dr. S. Sahu IIT Kharagpur, India Prof. Theo C. Haupt Mississippi State University, USA Prof. Thierry Marchant Ghent University, Belgium Prof. Ton van der Wiele Erasmus University, Netherlands Prof. Thomas N. Garavan University of Limerick, Ireland Prof. Tibor Csendes University of Szeged, Hungary Dr. V.K. Jain IIT Kanpur, India Prof. Zahir Irani Brunel Business School, Brunel University, UK

Institute Level Organizing Commiitte Dr. S.A. Channiwala MED, SVNIT Dr. H.B. Naik MED, SVNIT Dr. R.V. Rao MED, SVNIT Dr. H.K. Raval MED, SVNIT Dr. H.J. Nagarsheth MED, SVNIT Dr. K.P. Desai MED, SVNIT Prof. H.D. Desai MED, SVNIT Dr. A.A. Shaikh MED, SVNIT Dr. S. Kumar MED, SVNIT

S.V. National Institute of Technology, Surat, India Department of Mechanical Engineering

In Association with Indian Institution of Industrial Engineering (IIIE),

NHQ-Mumbai

International Conference on Industrial Engineering ICIE 2011

Technical Program Overview

Day 1, November 17, 2011, Thursday 9:00–10:30am High Tea and Registration 10:30–11:15am Inaugural 11:15–12:15pm Keynote Speech 12:30–2:30pm Conference Lunch Presentation Venue M1 M2 M3 M4 2:30–4:00pm Decision

Analysis, Systems Modeling and Simulation Methods (1)

Facility Planning and Management/ Value Analysis and Engineering

Lean, Agile and Quick Response Manufacturing

Logistics and Supply Chain Management System (1)

4:00–4:30pm Tea Break 4:30–6:00pm Flexible

Manufacturing System (1)

Quality Management (1)

Production Engineering (1)


7:30pm Onwards Conference Dinner and Cultural Programme Day 2, November 18, 2011, Friday 8:15–9:15am Morning Breakfast Presentation Venue M1 M2 M3 M4 9:30–11:00am Advanced

Operations Management


Manufacturing Systems Engineering (1)


11:00–11:30am Tea Break 11:30–1:00pm Decision

Analysis, Systems Modeling and Simulation Methods (2)


Small Scale Industries and Entrepreneurship


xvi International Conference on Industrial Engineering ICIE 2011

1:00–2:30pm Conference Lunch 2:30–4:00pm Product and

Process Innovation (1)

Quality function Deployment

Productivity and Industrial Engineering Practices (1)

Project Management

4:00–4:30pm TEA BREAK 4:30–6:00pm Reliability and

Maintenance Engineering (1)

Industrial Design (1)

Enterprise Resource Planning/ Human Resource Development

Ergonomics/ Human Factors Engineering

7:30 pm Onwards Conference Dinner and Cultural Programme Day 3, November 19, 2011, Saturday Presentation Venue M1 M2 M3 M4 8:15–9:15am Morning Breakfast 9:30–11:00am Productivity

and Industrial Engineering Practices (2)/ Products and Process Innovations (2)


Production Engineering (2)


11:00–11:30am Tea Break 11:30–1:00pm Industrial

Design (2) Decision Analysis, Systems Modeling and Simulation Methods (3)/ Engineering Economy and Cost Analysis

Industrial Materials and Metallurgy (1)

Technology and Knowledge Management (1)

1:00–2:30pm Lunch 2:30–4:00pm Flexible

Manufacturing System (2)/ Knowledge Based System/ Production Engineering (3)

Product and Process Innovation (3)/ Reliability and Maintenance Engineering (2)

Technology and Knowledge Management (2)/ Manufacturing Systems Engineering (2)/ Productivity and Industrial Engineering Practice (3)

Renewable Energy and Management/ Industrial Materials and Metallurgy (2)/ Industrial Pollution and Noise

4:00–4:30pm Tea Break 4:00–5:00pm Quality

Management (5)

5:00 Onwards Valedictory and High Tea

Contents

Conference Organizing Secretaries v Messages vii Organizers & Committee xiii Technical Program Overview xv

Session Date Time Location

: : : :

Decision Analysis, Systems Modelling and Simulation Methods (1) Thursday, November 17, 2011 2:30–04:00pm M1

ICIE 270 Priority-Based Encoding Genetic Algorithm for Two-Stage Transportation Supply Chain Siva Prasad Darla and Narayanan S.

1

ICIE 280 Application of RSM with Grey Relational Analysis in Metal Cutting for Multi-response Quality Characteristics L.B. Abhang and M. Hameedullah

1

ICIE 299 Application of Hybrid Genetic Algorithm for Performance Improvement in Multistage Machining S. Maitra and Debamalya Banerjee

1

ICIE 120 A Study on the Application of Multi-Criteria Decision Making Tool using TOPSIS & Artificial Neural Network (ANN) Algorithm S. Senthilvel, K. Ravichandran, R. Muruganandham, T. Sornakumar, E. Manokaran and S. Subhashini

2

ICIE 137 Modeling and Optimization of Healthcare Systems: An Overview Papiya Bhattacharjee and Pradip Kumar Ray

2

ICIE 148 Optimization of Transport Management using Vehicle Routing Problem Ashok Panjwani and Rishabh Raman

2


: : : :

Facility Planning and Management/ Value Analysis and Engineering Thursday, November 17, 2011 2:30–04:00pm M2

ICIE 101 An Integrated Fuzzy QFD and MCDM Approach for Facility Location Selection K. Kumar and S. Kumanan

3

ICIE 197 Shop Floor Management for Quality and Productivity Improvement N. Venkateshwarlu

3

ICIE 128 Modification of Plant Layout for Increasing its Productivity Neetesh Kumar Gupta, Prashant Kumar and Prabhat Suman

3

ICIE 253 Value Analysis to Panel Body Assembly Narender Kumar

3

ICIE 132 Cost Reduction Through Value Analysis in Galvanization Process Sunil Kumar Jauhar and Avadhesh Dalpati

4

ICIE 315 Eliminating Muda Through Value Stream Mapping (VSM) A Case Study of MNC M.N. Qureshi and M.R. Sama

4

xviii Contents


: : : :

Lean, Agile and Quick Response Manufacturing Thursday, November 17, 2011 2:30–4:00pm M3

ICIE 114 Lean Manufacturing to Lean Enterprise Abhishek Dixit, Sanjay Patel and Anupam Dixit

5

ICIE 151 Competitive Advantage of Lean Manufacturing over Traditional Manufacturing: A Case Study Binod Kumar Singh, Chandan Bhar and Visvesvaran Pandurangan

5

ICIE 240 Lean Initiatives In Process Industries Avinash Panwar, Rakesh Jain and A.P.S. Rathore

5

ICIE 135 Development of An Instrument for Improving Effectiveness of Lean Six Sigma Implementation in Small and Medium Sized Enterprises P.P. Shah and R.L. Shrivastava

6

ICIE 255 Integration of Lean, Six Sigma and Theory of Constraints Methodology(TOC) S.R. Prajapati and Tushar N. Desai

6


: : : :

Logistics and Supply Chain Management System (1) Thursday, November 17, 2011 2:30–04:00pm M4

ICIE 127 Fuzzy Based Leagility Index Computation S. Aravind Raj and S. Vinodh

7

ICIE 222 Simulation Based Analysis of the bull Whip Effect in Supply Chain Inventory System Pritee Ray and Amitabha Biswas

7

ICIE 158 A Model For Selection of Best Third Party Provider in Reverse Logistics Process N. Saiprasanna

7

ICIE 223 The Study of Green Supply Chain Management: A Case of Indian Industry L. Vijayvargy and G. Agarwal

7

ICIE 161 Competitiveness Analysis of a Manufacturing Orgination from Supply Chain Perspectives: A Case Study Kailash Attri and Mahesh Chand

8

ICIE 226 Analyzing Critical Success Factors of Supplier Development in Manufacturing Supply Chain S.K. Pradhan and S. Routroy

8

Contents xix


: : : :

Flexible Manufacturing System (1) Thursday, November 17, 2011 4:30–06:00pm M1

ICIE 185 Flexibility in Manufacturing System: A Bird’s Eye View S.P. Kaur, R. Kumar and J. Kumar

9

ICIE 296 A Hybrid Differential Evolution Approach for Flexible Job Shop Scheduling G. Balaraju, Sriram Venkatesh and B.S.P. Reddy

9

ICIE 201 Components, Capabilities, Challenges, Characteristics of Reconfigurable Manufacturing System R.E. Hiwase, J.F. Agrawal and R.R. Gawande

9

ICIE 265 Manufacturing Flexibilities in Small and Medium Enterprises Madhukar B. Sorte, Avinash D. Sarode

10

ICIE 325 A Computer-Aided System for Scheduling of FMS Ankush Sharma, Vishal Naranje and Shailendra Kumar

10

ICIE 131 Creating Machine Cells by Rank Order Clustering and Deciding Machines Sequence through Hollier Method N.N. Chudasama and A.U. Rajurkar

10


: : : :

Quality Management (1) Thursday, November 17, 2011 4:30–6:00pm M2

ICIE 133 Do Business Process Management and Six Sigma Complement Each Other? Suresh Subramoniam, K.V. Krishnankutt, K. Gopalakrishnan Nair and Ravi Chinta

11

ICIE 147 A Neural Network Method for measuring Service Quality in Water Utility Sector: An Indian Perspective S. Satapathy, S.S. Mahapatra, S.K. Patel, P.D. Mishra and A. Biswas

11

ICIE 181 An Empirical Study of Barriers to TQM Implementation in Indian Service Industries Faisal Talib, Zillur Rahman and M.N. Qureshi

11

ICIE 231 Total Quality Management for Technical Institution Dharamveer Singh, S.V. Singh, Rajesh Kumar and V.K. Singh

12

ICIE 300 Six Sigma Approach for Education Sector S. Srinivasa Rao, Ujjwal Kumar Behera and D. Rama Sita

12

ICIE 235 Relationship between Implementation of TQM, JIT, TPM and SCM and Manufacturing Performance V.D. Wakchaure, K.N. Nandurkar and S.P. Kallurkar

12

xx Contents


: : : :

Production Engineering (1) Thursday, November 17, 2011 4:30–6:00pm M3

ICIE 150 Predicting Drilling Parameters on Surface Roughness using Neural Network Model N. Ravinder Reddy and K. Eshwara Prasad

13

ICIE 203 Use of Fuzzy Expert System Combined with Taguchi Philosophy for Parametric Optimization of EDM on UTS 304 Grade Stainless Steel D.M. Padhy, R.K. Sahu, S. Datta and S.S. Mahapatra

13

ICIE 232 FEM Analysis of Stress Generation in Carbide Tool during Hard Turning Gaurav Bartraya and Kunal Saurabh

13

ICIE 237 Optimization of EDM Process Parameters with Aluminium-Fly Ash Composite using Taguchi Method Pankaj Sharma, O.P. Kaushal and Amit Sharma

13

ICIE 241 Effective High Speed Machining of Superalloy Inconel 718 using Minimum Quantity Lubrication under Pulsed Jet Mode Technique D.G. Thakur, A. Kumaraswamy, B. Ramamoorthy and L. Vijayaraghavan

14

ICIE 258 Study of the Methods of Improving Material Removal Rate in Electrochemical Machining S.H. Surekar, S.G. Bhatwadekar, W.G. Kharche and D.S. Bilgi

14


: : : :

Logistics and Supply Chain Management System (2) Thursday, November 17, 2011 4:30–06:00pm M4

ICIE 230 Solving Bi-Objective Supply Chain Problem by NSGA-II Evolutionary Algorithm Susmita Bandyopadhyay and Ranjan Bhattacharya

15

ICIE 103 Mediation Effect of ‘Supply Chain Strategy’ between ‘Competitive Strategy’ and ‘Business/Supply Chain Performance’ in the Processing Sector of Indian Manufacturing Industry Gunjan Soni and Rambabu Kodali

15

ICIE 122 Bullwhip Effect in SCM: With an Example of Online Beer Game Manish Pant

15

ICIE 234 Analysis of Risk Management Strategic Stances: A Unified Approach with Logistic Regression and ANN Piyush Singhal, G. Agarwal and M.L. Mittal

15

ICIE 106 Recycling of End-of-Life Vehicles in Indian Scenario Mayank Singh Rawat and Girish Thakar

16

ICIE 107 Inventory Reduction @ Third Party Logistics Service Provider Rajesh J. Dhake, Mandar Kelkar and Shivaji Thakur

16

Contents xxi


: : : :

Advanced Operations Management Friday, November 18, 2011 9:30–11:00am M1

ICIE 204 Product Benchmarking of Luxury Buses—A Case study N.S. Narahari and K.N. Subramanya

17

ICIE 314 To Develop an Expert System Coded in C++, For Balancing an Assembly Line using Ranked Positional Weight Heuristic Method Ashish Manoria, P.L. Verma, Sandip Kumar Mishra and Mudresh Mohan Tripathi

17

ICIE 331 Inventory Optimization for Restricted Capacity System with Rhythmic Production and Cyclic Replenishment Dinesh Seth and Manjit Pandey

18

ICIE 186 Comparative Analysis of Combination of Centered Moving Average and Exponential Smoothing With Linear Growth Regression Model of Sales Forecasting N.R. Rathod

18

ICIE 105 An Emerging Strategy: Business Process Engineering S.V. Ballar and Tushar N. Desai

18

ICIE 170 ISO 9001 Implementation In Indian Construction Industries: An Exploratory Study B.S. Patil, P.B. Ullagaddiand and D.G. Jugati

18


: : : :

Quality Management (2) Friday, November 18, 2011 9:30–11:00am M2

ICIE 316 TQM Vs Six Sigma, Which is Better? S.S. Sarda, I.K. Sayyad, P.V. Patil and S.G. Borse

19

ICIE 257 Quality Management in Post harvest processing of Citrus Fruits— An Approach to Identify Critical Success Factors (CSF’s) Sunil Kumar U.T. and Shrivastava R.L.

19

ICIE 126 The Measurement of Quality Performance with Sigma Measurement and Cost of Poor Quality Anup A. Junankar, P. N Shende and S. T. Bagde

19

ICIE 173 An Instrument for Measuring the Effectiveness towards Excellence in Technical Education—TQM Approach Anil R. Sahu, Rashmi R. Shrivastava and R.L. Shrivastava

20

ICIE 271 Identification of Critical Success Factors for the Total Quality Management S.C. Jamunnkar, S.S. Munjewar and R.V. Adkane

20

ICIE 175 Statistical Process Control in Pharmaceutical Industry: A Case Study for Optimum Productivity in Tablet Production Imtiyaz Khan, M.K. Ghosh and Puneet Mathur

20

xxii Contents


: : : :

Manufacturing Systems Engineering (1) Friday, November 18, 2011 9:30–11:00am M3

ICIE 102 Analysis of Interactions among Enablers of e-manufacturing: An ISM Approach Rajeev Saha and Sandeep Grover

21

ICIE 118 A Review on Green Manufacturing Practices Versus Product Stewardship Sanjeev Shrivastava, R.L. Shrivastava and S.K. Ganguly

21

ICIE 212 Advanced Manufacturing Technology Implementation: A Review of Barriers Anshul Swamy, R. Kant and M.D. Singh

21

ICIE 312 Just in Time Manufacturing Implementation and Performance Benefits in Indian SMEs and Large Manufacturing Industries M.T. Telsang and P.K. Brahmankar

21

ICIE 191 Green Manufacturing (GM): Issues, Trends & Practices Minhaj Ahemad A. Rehman, R.L. Shrivastava and R.R. Shrivastava

22

ICIE 199 World Class Manufacturing Models: Comparison and Evolution R. Gandhi, J. Mehta, M. Patel and T.N. Desai

22


: : : :

Logistics and Supply Chain Management System (3) Friday, November 18, 2011 9:30–11:00am M4

ICIE 113 Supply Chain Management: Optimization in Vegetable Distribution System in Indian Cities Lalit Yadav, Sonali Jain and Kamlesh Parmar

23

ICIE 129 Growth of Sea Logisitcs in India Mandar Narsinh Joshi and Prakash Ramkrishna Vaidya

23

ICIE 134 Development of an Integrated Two-tier Supply Chain Model for Perishable Products with Non-Deterministic Demand Sanjay W. Rajurkar and Rakesh Jain

23

ICIE 192 Exploring the Dimensions of Lean Supply Chains in Pharmaceutical Industry: A case study M.S. Kirkire

24

ICIE 163 Business Process Management @ 3PL Through Process Mapping and Activity Based Costing R.J. Dhake, H.R. Kurangale and Mandar Kelkar

24

ICIE 243 Critical Review of Literature for Improving Operational Effectiveness of an Enterprize With the Help of Supply Chain Management R.R. Gawande, I.K. Chopde, R.E. Hiwase, R.J. Dahake and S.G. Ingle

24

Contents xxiii


: : : :

Decision Analysis, Systems Modeling and Simulation Methods (2) Friday, November 18, 2011 11:30am–1:00pm M1

ICIE 302 Optimization through Genetic Algorithm using MATLAB A. Lakshmi Kameswari and Ujjwal Kumar Behera

25

ICIE 104 Development of Multi-criterion Decision Model for Justification of World Class Manufacturing Systems Rambabu Kodali and Vivek Sunnapwar

25

ICIE 263 Design and Development of Reactive Ordering System through E-Kanban using Taguchi’s Technique for a Warehouse of Tractor Assembly Plant M.P. Joshi and P.V. Kane

25

ICIE 275 A Review of Non Conventional Optimization Methodologies for CNC Turning Process V.P. Kulkani and S.D. Deshmukh

26

ICIE 169 Decision Support System for Rapid Prototyping Process Selection V.W. Shende and P.C. Kulkarni

26

ICIE 172 Solving Dynamic Layout problem with Genetic Algorithm K.V. Chandratre and K.N. Nandurkar

26


: : : :

Quality Management (3) Friday, November 18, 2011 11:30am–1:00pm M2

ICIE 285 Total Quality Management Systems and SIX Sigma K.P. Sohani, A.N. Shetty and U.D. Gulhane

27

ICIE 215 Approach Paper for a Research Proposal to Improve Quality and Productivity through Lean Six Sigma Implementation in Rolling Industry in Central India R.L. Shrivastava and K.I. Ahmad

27

ICIE 236 Quality initiatives: A Literature Review on Relationship, Blending and Scope for Research G. Upadhyaya and K.S. Bhat

27

ICIE 160 Kaizen Improves quality and Productivity: A Case Study T.B. Pankhania and V.K. Modi

28

ICIE 244 Reduction of Rejection in Automotive Control Cables Prepared by Pressure Die Casting through Six Sigma DMAIC methodology: A Case Study at Auto-Ancillary Industry in India T.K. Naik, P.C. Gholap, M.J. Desai and G. Pinto

28

ICIE 266 Quality Introspects and Productivity: A Survey Conducted at Vitthal Udyognagar in Anand District of Gujarat, India T.B. Pankhania and V.K. Modi

28

xxiv Contents


: : : :

Small Scale Industries and Entrepreneurship Friday, November 18, 2011 11:30am–1:00pm M3

ICIE 259 Quality & Productivity Improvement Framework for Micro Small Medium Size Enterprises (MSME) using Lean & Six Sigma M.S. Lande and R.L. Shrivastava

29

ICIE 276 Implementation of Six Sigma in a Small Scale Industry Apoorva M. Kakde, Dipti N. Agrawal and Nikhil M. Badole

29

ICIE 318 Study of Analysing the Impact of ISO 14000 Certification on Organizational Performance in Case of SMEs in India A.K. Bewoor and M.S. Pawar

29

ICIE 174 Need of Entrepreneurial culture in Vidarbha Region of Maharashtra M.S. Bodkhe and N.M. Sawai

30

ICIE 307 Industrial Engineer as a BDS Provider & Facilitator an Enlarged Role in the Globalised Economy D.M. Parikh

30

ICIE 308 Challenges Faced By Micro Entrepreneurs: A Study of the Street Vendors of Surat Renuka Garg, Aaishwarya Kulkarni and Priti Garg

30


: : : :

Logistics and Supply Chain Management System (4) Friday, November 18, 2011 11:30am–1:00pm M4

ICIE 187 Strategic alliance between Supply Chain Partners: An Overview O.P. Dubey and N. Sohani

31

ICIE 141 Supplier Evaluation and Selection in A Dairy Industry M.A. Bhura, R.A. Kubde, M. Ayaz Afsar and M.T. Sohel

31

ICIE 188 Impact of Natural Disasters on Supply Chains and Risk Management P.K. Soni and I. Khan

31

ICIE 247 Integrating Lean Six Sigma and Supply Chain Management (SCM) for Improving the Performance S.S. Sarda, I.K. Sayyad, S.J. Gorane and P.P. Patil

32

ICIE 267 Drivers of Supply Chain Management for Deliverable Improvements N.B. Tambe and A.D. Sarode

32

ICIE 293 FMCG Flow and Opportunity for Green Supply Chain around Technocrats C.P. Chauhan and N.K. Lautre

32

Contents xxv


: : : :

Product and Process Innovation (1) Friday, November 18, 2011 2:30–4:00pm M1

ICIE 245 Selection of Professional Service Innovative Organization by using Analytic Hierarchy Process V. Kalluri and R.B. Kodali

33

ICIE 256 Integrating Product Development and Supply Chain Management A. Pareek, R. Jain and A.P.S. Rathore

33

ICIE 291 RFID Based System for Prevention of Material Mix-up at Various Stages in Metal-Injection-Molding Process Vinayak V. Kulkarni

33

ICIE 251 Application of some Innovative Technologies in the Growth of Scrap Based Steel Making in India—A Review R.D. Thakre, G.V. Thakre and D.N. Agrawal

33

ICIE 274 Ecodesign and Ecomanufacturing of a Kitchen Blender S.J. Madki and B.B. Deshmukh

34

ICIE 298 Nano Fuels: A Challenge to Petroleum Industry R.N. Mehta, P.A. Parikh and M. Chakraborty

34


: : : :

Quality function Deployment Friday, November 18, 2011 2:30–4:00pm M2

ICIE 319 Design and Development of a Frame Work for System Design Requirements in Technical Education: A Quality Function Deployment Approach P. Karuppuchamy

35

ICIE 189 Analysis of Customer Satisfaction in Internet Banking Service Quality using Quality Function Deployment Approach Parul Gupta a n d R.K. Srivastava

35

ICIE 208 Product Development in Dairy Industry using Quality Function Deployment (QFD): A Case Study Jandel S. Yadav, M.K. Ghosh and Rakesh K. Patidar

35

ICIE 108 Comparative Study between Public Sector and Private Sector Banks using Quality Function Deployment Suneel Kumar Shukla, R.C. Gupta and Girish Thakar

36

ICIE 292 Crisp & Fuzzy Quality Function Deployment Approaches for Improving Design of Domestic Refrigerator M.N. Qureshi and C.P. Vithalani

36

ICIE 130 Application/ Implementation of Quality Function Deployment: A Case Study in Two Wheeler Segment Mohammed Irfan Khan and Devendra S. Verma

36

xxvi Contents


: : : :

Productivity and Industrial Engineering Practices (1) Friday, November 18, 2011 2:30–4:00pm M3

ICIE 301 Industrial Engineering-Challenges and Opportunities P. Chandrakanth Sharma, Ujjwal Kumar Behera, D. Rama Sita and K.R. Nagabhusanam

37

ICIE 157 Performance Evaluation of Underground Hand Section Mines through OR Techniques Ujjwal Kumar Behera, B.V. Ramana, D. Rama Sita and M. Sreenivasulu

37

ICIE 323 Operational Strategies in Pharmaceutical Industry Rajkumar Patil and M.R. Shakthi Prakash

37

ICIE 144 Identification and Evaluation of Critical Success Factors (CSFs) for Performance Improvement of furniture Cluster: An Approach R.B. Chadge, R.L. Shrivastava and S.D. Kshirsagar

38

ICIE 217 Application of Basic Quality Tools for Wastage Reduction in Batching Section of Selected Jute Mill Balu T. Sukate, K. Maduletty and Mani K. Madala

38

ICIE 218 Application of basic Quality Tools for Wastage Reduction in Weaving Section of Selected Jute Mill Balu T. Sukate, K. Maduletty and Mani K. Madala

38


: : : :

Project Management Friday, November 18, 2011 2:30–4:00pm M4

ICIE 221 Prediction of Outsourced Projects Performance using Artificial Neural Networks J. Dasgupta, R.P. Mohanty and G. Sahoo

39

ICIE 193 New Method for Determination of Floats in Activity on Node (AON) Networks B.R. Kharde and G.V. Vikhe Patil

39

ICIE 196 New Method for Constructing Activity on ARC (AOA) Networks B.R. Kharde and G. Vikhe Patil

39

ICIE 334 Capital Budgeting Simulation Model to aid Project Selection that Maximizes the Net Worth Prayag P. Patel and Palak P. Patel

39


: : : :

Reliability and Maintenance Engineering (1) Friday, November 18, 2011 4:30–6:00pm M1

ICIE 153 Introducing TPM Technique in Flexible Manufacturing System for Maximum OEE Rajesh Kumar Verma, K.K. Goswami, Chandra Prakash Gupta and Arpan Kr. Mandal

40

ICIE 154 A Case Study of Jishu Hozen on Usha Martin Ltd., Ranchi Manoj Kumar Pal, Manish Kumar and Vinay Sharma

40

Contents xxvii

ICIE 210 An Approach for Condition Monitoring of 210MW Power Plant Unit A.R. Gatlewar, D.R. Zanwar, G.D. Mehta and J.P. Modak

40

ICIE 140 Vibration Based Condition Monitoring of Drag Line M. Ayaz Afsar, J.P. Modak, M.T. Sohel and A. Langde

41

ICIE 279 Impact of Human Error in Maintenance Management and Minimizing Methodology N.K.K. Prasanna, Tushar N. Desai and T.R. Balavishwanathan

41

ICIE 168 Preventive Maintenance of Centrifugal Pump KSB (40-160) in Chemical Plant J.D. Gandhi and J.H. Mistry

41


: : : :

Industrial Design(1) Friday, November 18, 2011 4:30–6:00pm M2

ICIE 162 Performance of Orthogonal Frequency Division Multiplexing (OFDM) in 4G Sanjay Patel, Govind Patel and Vipul Patel

42

ICIE 206 Pole-Placement Controller and Minimum-Order State Observer Design for Rotary Inverted Pendulum Bipin Krishna, I. Thirunavukkarasu and V.I. George

42

ICIE 213 Analysis of Failures in the different zone of the Boiler: An Experimental Approach S.P. Ambade, P.R. Dongre and V.B. Rakhunde

42

ICIE 159 Skyhook Controlled Vehicle Semi-active Suspension System D.R. Unaune and M.J. Pawar

43

ICIE 306 Stress Analysis of Spur Gear using Photoelasticity and FEA R.R. Honkalas, B.B. Deshmukh and R.D. Mistry

43

ICIE 184 Ride Analysis of Quarter Vehicle Model D.R. Unaune, M.J. Pawar and S.S. Mohite

43


: : : :

Enterprise Resource Planning/Human Resource Development Friday, November 18, 2011 4:30–6:00pm M3

ICIE 110 ERP Implementation: A Case Study in Two Wheelers Manufacturing Company Pallavi Joshi Upadhyay and Nagendra Sohani

44

ICIE 248 Effect of ERP Implementation on Productivity—A Case Study Sunil S. Karidkar and T.B. Patil

44

ICIE 260 Enterprise Resource Planning Implementation in Small and Medium Enterprises M.S. Tufail, M.S. Anwar, S.T. Bagde and S.P. Untawale

44

ICIE 145 A Proposed Model For Integration of ERP, CRM, SRM and Supply Chain Management Ram Janm Singh and Nagendra Sohani

45

xxviii Contents

ICIE 123 Impact of Motivational Practices on Human Resource Development Sharad R. Kulkarni

45

ICIE 165 Factors Affecting Job Satisfaction: A Case Study A Survey Conducted in Industries at Vitthal Udyognagar of Anand District of Gujarat State T.B. Pankhania and V.K. Modi

45


: : : :

Ergonomics/Human Factors Engineering Friday, November 18, 2011 4:30–6:00pm M4

ICIE 254 Investigation and Analysis of Musculoskeletal Disorders in Tractor Trolley Manufacturing Unit Gives Perspective to Design Ergonomic Work Station Dipti N. Agrawal, Apoorva M. Kakde and Nikhil M. Badole

46

ICIE 305 Economical and Ergonomic Design and Manufacture of the Cashew Kernel Removing Machine Deshmukh B.B. and R.D. Mistry

46

ICIE 124 Ergonomic Design of Vehicle Chair for Physically Challenged Persons Y.M. Puri and A.B. Patel

46

ICIE 262 Study of the Ergonomics of a Car Seat and Its Effect on Seat Reclining Levers Saurin Sheth, Ketan Tamboli, Prakash Raghupathi and Mayank Sharda

46

ICIE 182 Ergonomics Application Used in CAD/CAM Lab for Engineering College Students Virendra K. Parmar and J.H. Mistry

47

ICIE 290 Design of Workstation for Rural Blacksmiths of South Gujarat V.Z. Dhimmar and S.M. Sheth

47


: : : :

Productivity and Industrial Engineering Practices (2)/ Products and Process Innovations (2) Saturday, November 19, 2011 9:30–11:00am M1

ICIE 288 The Role of Infrastructures in the Perception of Industrial Productivity—An Empirical Finding T.B. Pankhania and V.K. Modi

48

ICIE 264 Introduction to Real options as a tool for IE's in Present Uncertain Times Sammeer Kaystha

48

ICIE 207 Performance Evaluation of Grey Relational Analysis for Customer Preference Based Selection of Product Alternatives S.R. Gangurde and M.M. Akarte

48

ICIE 112 Need for Product Cannibalization in Small Scale Manufacturing Industries through Product Life Cycle Management R.P. Terkar and H. Vasudevan

49

Contents xxix

ICIE 116 Comparative Case-Analysis on Safety Life Cycle Management (SLCM) Approach using IEC 61508 Safety Standard in the Process Industries Kumar Rohit

49

ICIE 115 Justification of Cleaner Production in Small and Medium Scale Industries Gajanan S. Patange, Nilim J. Shah and Avdhoot Rajurkar

49


: : : :

Quality Management (4) Saturday, November 19, 2011 9:30–11:00am M2

ICIE 277 Basic Concepts of FMEA Method in Manufacturing Process Ashish Panchal, Jyoti Menghani and Janmesh Pandya

50

ICIE 326 Increased Productivity of Tyre using Lean Methodology A.J. Chavda and M.Y. Patil

50

ICIE164 Quality Circle-Concept and Case Study Hetal I. Chaudhari and Tushar N. Desai

50

ICIE 272 Just in Time Manufacturing Implementation Issues and Performance in Selected Indian Industries S.K. Patil, M.T. Telsang and Shashi Kant Rai

50

ICIE 335 Measuring the Impact of Total Quality Management in the Manufacturing Sector of Valsad District V.B. Patel, K.M. Nayak and N.C. Damania

51

ICIE 336 A Study of Factors Affecting the Implementation of TQM in the Corporate World of Union Territory of Dadra Nagar & Haveli K.N. Shah

51

232222


: : : :

Production Engineering (2) Saturday, November 19, 2011 9:30–11:00am M3

ICIE 143 Experimental Investigation of Heat Effect on Mild Steel by TIG Welding: The Effect of TIG Welding Heat Due to Fourth Pass on the Plates in Terms of Microstructure S.P. Ambade, A.P. Patil, Y.M. Puri and D.M. Hajare

52

ICIE 219 A Literature Preview of Quality Enhancement in Grinding using Liquid Oxygen As A Cutting Fluid Sandip Das and P.L Verma

52

ICIE 282 Taguchi Optimization of Surface Integrity Parameters in High Speed Machining of Titanium Alloy (Ti-6Al-4V) S.S. Bhadane, R.S. Pawade and B.F. Jogi

52

ICIE 195 Effect of Process Variables on Open Die Hot Forging—A Study Bhumi Shah and S.A. Channiwala

53

ICIE 205 Effect of Different Tool Material on MRR and Surface Roughness of Mild Steel In EDM V.D. Patel and C.P. Patel

53

xxx Contents

ICIE 329 Generation of Profile Map for Near Net Shape Upsetting of Copper Billet by Forging Process Pritesh Prajapati

53

1212


: : : :

Logistics and Supply Chain Management System (5) Saturday, November 19, 2011 9:30–11:00am M4

ICIE 304 Dimensions of Supply Chain Management: A Literature Review A.M. Raj and M.V. Sidhpuria

54

ICIE 311 Supply Chain Management—A Study of Textile Wholesalers and Retailers Hitesh Parmar and Jaydip Chaudhari

54

ICIE 273 Environmental Principles Applicable to Supply Chain Operation S.J. Gorane, S.S. Sarda and Ravi kant

54

ICIE 136 Supply Chain Management Risk: A Prospective Research Mahesh H. Trivedi

54

ICIE 229 Modeling a Fuzzy Expert System to Evaluate Vendor Performance M.N. Qureshi and K.S.Vaghosi

55

ICIE 322 Information Sharing in Supply Chain: Modeling the Barriers A.A. Pujara, R. Kant and M.D. Singh

55

hfjghkhgfjhgjj


: : : :

Industrial Design (2) Saturday, November 19, 2011 11.30am–1:00pm M1

ICIE 324 Reaction force Analysis of Rolling Bearing by Finite Element Method Pritesh Prajapati and Anish Pathan

56

ICIE 146 Co-Generation of Power by Stirling Engine Utilizing Waste Heat of I.C. Engine—A Review J.A. Doshi, D.R. Shah and V.K. Manglik

56

ICIE 333 Development of Plate and Rod Temperature Compensating Mechanism for Parallel Cavity Filter Ashish M. Desai, A.R. Srinivas and Piyush P. Gohil

56

ICIE 156 Optimazation of Inlet & Exhaust Valve Leakage Problem in Reputed Company J.A. Doshi and S.Y. Jani

57

ICIE 194 A review on Damage Detection Methodology for Shaft Bhumi Shah and D.P. Vakharia

57

ICIE 250 PFC of Various High-frequency Switching Converter Topologies Sumita D. Chakrabortty

57

Contents xxxi


: : : :

Decision Analysis, Systems Modeling and Simulation Methods (3) /Engineering Economy and Cost Analysis Saturday, November 19, 2011 11:30am– 1:00pm M2

ICIE 179 Approach Integration for Supplier Selection using Data Envelopment Analysis H.F. Admar and C.S. Jadav

58

ICIE 198 Estimating Operating Efficiency of Selected Pharmaceutical Companies using Data Envelopment Approach Dhaval Maheta

58

ICIE 261 A Selection of Automated Guided Vehicle using Complex Proportional a Ssessment (COPRAS) Method K.D. Maniya, S.Y. Patel and M.G. Bhatt

58

ICIE 233 Computer Aided Methoding for Engineering Economy & Cost Analysis: A Case Study Jitendra S. Bhat and S.S. Mane

58

ICIE 320 Remanufacturing Cost Management for Domestic Refrigerator Anand Petare, Nagendra Sohani and Sandeep Rawariya

59

ICIE 149 Development of Demand Based Remanufacturing Cost Estimation Model Amol D. Lokhande, Rashmi R. Shrivastava and R.L. Shrivastava

59

12


: : : :

Industrial Materials and Metallurgy (1) Saturday, November 19, 2011 11:30am–1:00pm M3

ICIE 216 Effect of Random Material Properties on Free Vibration Response of Functionally Graded Materials Plate with Cutouts in Thermal Environment K.R. Jagtap and Achchhe Lal

60

ICIE 303 An Economic Approach towards Zero-Error using Non-Destructive Testing for Flaws and Voids in Heavy Duty Tyres Uday Gudsoorkar and Avinash D. Sarode

60

ICIE 309 Effect of Na, Sr, Rear Earth and P on as Cast Al-Si Alloys as Modifier: A Review N.R. Rathod and J.V. Menghani

60

ICIE 283 A Review Paper on Dispersion Strengthening of Magnesium using Mechanical Alloying Method Yatin Chauhan and J. Menghani

61

ICIE 310 Development In Hadfield Steel and Effect of Alloying Element Roshni Parmar, Jyoti Menghani and Bharat Dave

61

ICIE 214 A Review Paper on Hardfacing Vishal I. Lad, J. Menghani and S.A. Channiwala

61

xxxii Contents


: : : :

Technology and Knowledge Management (1) Saturday, November 19, 2011 11:30am–1:00pm M4

ICIE 117 A Comparative Study of Cellular Service Provider Operating in the “Manchester of Punjab”, Ludhiana Vipan Bansal, Harwinder Singh and Rakesh Bhatia

62

ICIE 121 Development of Object Sorting and Counting Machine using Image Processing Manish Pant and Ashish Kumar Pant

62

ICIE 295 Knowledge Management Practices in Indian SMEs: A Survey on Strategic Issues A. Anand, R. Kant and M.D. Singh

62

ICIE 313 Post Merger Performance Evaluation of Indian Mergers in the Computer Software and the Telecommunication Services Sector Janki Mistry

63

ICIE 119 Data Mining : A competitive Weapon for Fraud Detection Shivani V. Vora and R.G. Mehta

63

ICIE 209 Applications of K-Means Clustering in Engineering Applications Vaishali R. Patel and Rupa G. Mehta

63

12 Session Date Time

: : :

Flexible Manufacturing System (2) /Knowledge Based System/ Production Engineering (3) Saturday, November 19, 2011 2:30–4:00pm

ICIE 286 Scope of Machine Vision in Automated Inspection and Gauging B.S. Pillai and A.V. Patel

64

ICIE 321 An Algorithm for Two Dimensional Nesting of Sheet Metal Components Nehal Joshi, Avadhoot Rajurkar and Ashish M. Desai

64

ICIE 281 Analysis of Forging of Connecting Rod to Design Knowledge Based System D.N. Kamble and V.M. Nandedkar

64

ICIE 330 A Knowledge Based Design Advisory System for Assessing Manufacturability of Sheet Metal Parts M. Chaudhari, V. Naranje and S. Kumar

65

ICIE 246 Investigation on Various Output Quality Characteristics during CNC Turning Process of Different Materials L.S. Patel and H.K. Dave

65

Contents xxxiii


: : : :

Product and Process Innovation (3)/Reliability and Maintenance Engineering (2) Saturday, November 19, 2011 2:30–4:00pm M2

ICIE 327 Product Enhancement for Automotive Cooling System through Failure Modes & Effects Analysis B.R. Pathak, J.A. Doshi and Ravikant

66

ICIE 249 Automation and Control of Polyurethane Manufacturing Process Alpesh M. Patel, Parth Sandesara and Hitesh B. Kapadia

66

ICIE 278 Development of Lubricant Spraying Attachment for Press Tool Machines as a Tool to Reduce Material Handling, Involved Labor and Accident Prone Occasions V.P. Palsanawala and A.S. Shah

66

ICIE 332 Effective Maintenance Management in Petrochemical Industries N.K.K. Prasanna and Tushar N. Desai

67

ICIE 190 Total Productive Maintenance and Overall Equipment Efficiency-A Study A.S. Krishnan and T.N. Desai

67

12


: : : :

Technology and Knowledge Management (2)/ Manufacturing Systems (2) Engineering/Productivity and Industrial Engineering Practices (3) Saturday, November 19, 2011 2:30–4:00pm M3

ICIE 294 Knowledge Management Practices: Case Study from Select Indian SMEs A. Anand, R. Kant and M.D. Singh

68

ICIE 220 Modeling the Metrics of Knowledge–Sharing Barriers: An ANP approach B.P. Sharma, M.D. Singh and R. Kant

68

ICIE 180 Role of Technology in Service Encounter Anand Prakash

68

ICIE 225 Advance Manufacturing Technological Enablers Implementation: A Review Surjeet Singh R. Kant and M.D. Singh

69

ICIE 152 Linkages between Business Environment and Firm Performance: An Empirical Study for Rice Cluster in Indian Setting Amrendra K. Singh and Rakesh L. Shrivastava

69

xxxiv Contents


: : : :

Renewable Energy and Management/ Industrial Materials and Metallurgy (2)/ Industrial Pollution and Noise Saturday, November 19, 2011 2:30–4:00pm M4

ICIE 284 Sensex Credits for Go-Green Mechanisms Ujjwal Talati and Nishit Pandya

70

ICIE 142 Design Concept Hybrid System Power Generation and Storage Namrata Lotia, M.S. Anwar, S.T. Bagde and M.S. Tufail

70

ICIE 328 Use of Wind Energy with Air Lift Technology for Irrigation in India: A Review N.R. Patil and M.S. Pawar

70

ICIE 269 Introduction to Developments in Coatings H.J. Tinwala, J.V. Menghani and D.V. Shah

70

ICIE 287 Manufacturing of Wood Plastic Composite (WPC) with Different Volume Fraction of Fiber R.J. Ajudiya and A.A. Shaikh

70

ICIE 297 Safety Analysis on Industrial Noise Hazards-Prevention and Management Partha Mukhopadhyay and B.K. Bhattacharya

71

ICIE 252 Pollution Prevention and Emission Control Techniques in Foundries—A Review G.V. Thakre, R.D. Thakre and D.N. Agrawal

71


: : : :

Quality Management(5) Saturday, November 19, 2011 4.30–6:00pm M1

ICIE 337 Quality Management in The Aerospace and Defense Industry P.B.S. Reddy and Eric Zayas

72

ICIE 338 Six sigma strategy for a Successful Turn-Around of Sick Unit Gururaj Kulkarni and Himanshu Trivedi

72

ICIE 339 Six Sigma for Indian Chemical Industry JayeshPathak, Tushar N. Desai and Pravin Bhamre

72

ICIE 340 Critical Success Factors of Six Sigma—An Empirical Study of Indian Industries Tushar N. Desai, R.L. Shrivastava and O.P. Yadav

72

ICIE 341

Optimization of Fly Ash Utilization through Six Sigma DMAIC Methodology: A Case Study at Cement Industry P.C. Gholap, T.N. Desai and A.S. Sathe

73

AUTHOR INDEX 75

Golden Jubilee Celebrations Abstracts of the International Conference on Industrial Engineering

Documents

Transcript of Golden Jubilee Celebrations Abstracts of the International Conference on Industrial Engineering