FINAL PROGRAM | 1 - Sea to Sky Meeting Management Inc.

164
FINAL PROGRAM | 1

Transcript of FINAL PROGRAM | 1 - Sea to Sky Meeting Management Inc.

FINAL PROGRAM | 1

FINAL PROGRAM | 3

Table of Contents

Welcome to Seoul 4

Sponsors 6

Welcome to ASME 2016 Turbo Expo 7

Grand Opening 8

IGTI Board & Conference Committee 9

Networking Events 10

Women’s Networking Event 11

Turbo Expo 2017 12

Local Liaison Committee 13

Supporting Publications 13

Participating Organizations 13

Featured Lectures 13

GT India 2017 14

Student News 16

Student Poster Sessions 18-19

COEX Convention Center Floorplans 20

Session Participant Information 23

Exhibit Hall Presentation Stage Schedule 24

Exhibit Advisory Committee 25

Exhibitor Social Media 27

Exhibit Booth Listings 28

Exhibit Product Categories 30-31

Exhibit Booth People's Choice 31

Award Winners 32

Committee Chairs & Vice Chairs 34

Committee Meeting Schedule 35

Committee Point Contacts 35-36

Registration Information 38

Joint Sessions 40

Tutorials of Basics & User Sessions 41

Facility Tours 42

Session Schedule 43

Technical Conference 44-149

Author Index 150-159

Schedule at a Glance Back Cover

Driven by the latest cutting-edge technologies and trends, Seoul is one of the most fast-paced high-tech cities in the world. As progressive as Koreans are, many still retain traditional and Confucian values. Korean culture and customs are deeply rooted in family values with, respect and obedience towards seniors, including parents, teachers, older siblings, senior co-workers, and generally anyone of older age. Seniors in return have more responsibilities and obligations towards their juniors. Koreans also value family more importantly above anything else. Status and dignity is crucial as every action of an individual reflects back on their family, company, and country.

While most Koreans will understand that foreigners who commit minor social faux pas do not mean disrespect, following basic Korean etiquettes will be warmly received.

Take your shoes off at the door when entering any residence, temple, or guesthouse.

A short bow – essentially a nod – is the most respectful greeting.

Give and receive any object using both hands.

W E L C O M E T O S E O U L , S O U T H K O R E A

환영합니다

Gyeongbokgung Palace

6 | ASME 2016 TURBO EXPO

TURBOCAMI N T E R N A T I O N A L

PLATINUM

GOLD SILVER

BRONZE

WOMEN INTURBOMACHINERYEVENT

ATTENDEE BAGS

STUDENT MIXER

ADDITIONAL SPONSORS

FINAL PROGRAM | 7

We hope you will enjoy your visit to Seoul!Please join us at the Grand Opening Session on Monday morning which includes the Turbo Expo Keynote Panel and ASME IGTI Awards Ceremony. This year’s keynote theme is “Energy and Propulsion in the Information Age.” Along with being a first in Asia, Turbo Expo - held this year in Seoul, South Korea - will have another first in changing the format of the keynote from a lecture session to a panel session. Moderators will field questions from the audience and have the panelists answer. Offering their expert perspectives will be keynote panelists Eric Gebhardt, Chief Platforms & Operations Officer, Current powered by GE; Daniela Gentile, CEO, Ansaldo Sviluppo Energia A.S.EN; Thomas W. Prete, Vice President, Engineering, Pratt & Whitney. Moderators will be, myself, Tim Lieuwen, Professor, Georgia Institute of Technology and William A. Newsom, Executive Vice President, New Generation Systems, Mitsubishi Hitachi Power Systems Americas. Two plenary sessions will follow the same format on Tuesday and Wednesday morning (see page 8 for more information).

The awards ceremony will honor the winners of the ASME R. Tom Sawyer Award, the ASME Gas Turbine Award, the ASME IGTI Industrial Gas Turbine Technology and Aircraft Engine Technology Awards, the John P. Davis Award, and the Early Career Engineer Award in memory of the late Dilip R. Ballal.

As one of an estimated 3,000 participants, you will have a choice of over 1,000 technical papers to be presented in over 300 technical sessions. The exposition will showcase the newest products from over 80 companies, offering opportunities for practitioners and researchers to come together. There will also be Workshops, Panel Sessions and Tutorials. All attendees are invited to the Welcome Reception on Monday evening. The Women’s Networking Event is on Tuesday evening and students and young engineers should not miss the mixer on Wednesday evening.

On behalf of ASME IGTI, I wish to thank our sponsors who have ensured the success of Turbo Expo 2016 through their generous support. I also wish to thank our Executive Conference Chair, William A. Newsom, the keynote and plenary panelists, our Local Liaison Committee Chair, Seung Jin Song; this year’s Review Chair, Jaroslaw Szwedowicz and the Vice Review Chairs, Ray Chupp, Zolti Spakovszky, and Mark Turner and our Technical Program Chair, John Chew. Special thanks to all of the volunteers who contributed so much to make Turbo Expo the premier conference for turbomachinery technology. Turbo Expo would not be possible without the tireless efforts of the authors, reviewers, session organizers, point contacts, vanguard chairs, committee leaders, and others. Thank you for attending Turbo Expo. I hope that you find your time in Seoul to be an enriching and memorable experience.

Conference Chair Tim Lieuwen Georgia Institute of Technology

Welcome to Seoul! Seoul, Korea’s largest city, was founded more than 2,000 years ago by Baekje, one of Korea’s three kingdoms. Situated on the Hans River, Seoul has a population of 10,349,312. It is the 14th largest city in the world and second largest metropolitan area.

It is also home to Korean turbomachine manufacturers – Doosan Heavy Industries making steam turbines & gas turbines and Hanwha Techwin producing energy equipment & aviation gas turbine components. In addition, many of the world’s largest engineering and construction companies as well as regional headquarters of multinational companies such as Siemens Energy Solutions are based in Seoul.  Such concentration of users, researchers, and manufacturers offers an exceptional environment for Turbo Expo.

Seoul is a popular tourist destination with many areas of interest. The Gangnam area is where the stylish set of Seoul come together, thanks to a wide range of trendy items and luxurious shopping spots. People who want to experience the chic and stylish side of Seoul must be sure to visit the Gangnam area. The Dongdaemun area holds Korea’s number one treasure, the Heunginjimun Gate, which was built to defend Seoul. Its’ exquisite and splendid appearance attract thousands of people’s attention. The City Hall area - “the 600-year Capital” phrase represents the pride of Seoul. Five historic palaces from the Joseon Dynasty, including Changdeokgung Palace, a UNESCO World Heritage site, old Hanok villages, the Korea House and Samcheonggak are excellent places to visit in this area. The Yongsan district is characterized by its unique cultural mixture of not only an American style, but also by European and Middle Eastern influences. Gangdong area is where Seoulites relax with a walk through the beautifully verdant and picturesque Seoul Forest Park or by taking in fabulous views of the Hangang River and the many surrounding lakes. COEX Mall, located in our conference venue, is the world’s largest underground shopping mall. I am sure you will have a fantastic time visiting some of these popular areas!

I wish you all a pleasant, productive, and rewarding visit to the Republic of Korea.

Executive Conference Chair Bill Newsom Mitsubishi Hitachi Power Systems Americas, Inc.

Free wi-fi access is provided to ASME Turbo Expo attendees throughout the COEX.

Welcome to ASME 2016 Turbo Expo

8 | ASME 2016 TURBO EXPO

Along with being a first in Asia, Turbo Expo - held this year in Seoul, South Korea - will have another first in changing the format of the keynote from a lecture session to a panel session. Moderators will field questions from the audience and have the panelists answer. We have some exceptional high profile industry experts lined up to be the moderators and panelists. Bringing their expertise and experience, they will make this a worthwhile part of the conference.

Join thousands of turbomachinery professionals at the year’s most commanding gathering of business leaders, technology contributors, and authorities in the field of turbomachinery. It is an ideal occasion to gather essential marketplace insights, learn about pivotal achievements, and connect with colleagues from around the world.

The Keynote theme is Energy and Propulsion in the Information Age. The keynote session will explore those innovations and how they are impacting rotating machinery in the power generation, aircraft, and oil and gas industries, including manufacturing and fleet monitoring and maintenance.

PanelistsEric Gebhardt, Chief Platforms & Operations Officer, Current powered by GE

Daniela Gentile, CEO, Ansaldo Sviluppo Energia A.S.EN

Thomas W. Prete, Vice President, Engineering, Pratt & Whitney

ModeratorsTim Lieuwen, Professor, Georgia Institute of Technology

William A. Newsom, Executive Vice President, New Generation Systems, Mitsubishi Hitachi Power Systems Americas

The keynote is followed by the ASME IGTI annual awards program which honors individuals, your peers, who have made significant contributions to the advancement of turbine technology and the industry.

PlenariesTwo plenary sessions will follow the keynote format on the following days:

Asset Optimization and Monitoring in the Information AgeTuesday, June 14, 2016 | Grand Ballroom, First Floor North Side, COEX Center | 8:00 – 8:45 a.m.

Significant growth in sensor technology, models, and data analytics is revolutionizing our capabilities to optimize the performance and proactively manage and monitor the health of gas turbines. Many OEM’s, utilities, and operators now have large, networked monitoring centers for optimizing the health of specific engines or fleets of engines. Moreover, new challenges and questions around data ownership, privacy, and cybersecurity are emerging, which could severely constrain these prospects. This plenary session will explore these opportunities and threats and discuss future outlooks for asset monitoring.

PanelistsDr. Eisaku Ito, General Manager, Mitsubishi Heavy Industries R&D

Maria Sferruzza, Turbomachinery Contractual and Maintenance Services GM, GE Italy

Paul Stein, Director, Research & Technology, Rolls-Royce plc

GRAND OPENINGEnergy and Propulsion in the Information Age

Turbo Expo Keynote & ASME IGTI Annual AwardsMonday, June 13, 2016 | 10:15 a.m. – 12:15 p.m.

Grand Ballroom, 1st Floor North Side, COEX Center

FINAL PROGRAM | 9

ModeratorsJames R. Maughan, Technical Director, Aero-Thermal and Mechanical Systems, GE Global Research

Dr. Klaus Brun, Machinery Program Director, Southwest Research Institute

Gas Turbine Manufacturing in the Energy AgeWednesday, June 15, 2016 | Auditorium, Third floor, COEX Center | 8:00 – 8:45 a.m.

The next industrial revolution in manufacturing is being forged at the intersection of physical and digital worlds. Next generation turbines will be engineered from cradle to grave in a virtual design space, enabling the design, manufacturing, and utilization of turbines to be optimized at an overall system level. This plenary session will explore that new industrial manufacturing renaissance and what’s coming next.

PanelistsVinod Philip, Chief Technology Officer, Siemens Power and Gas

Akimasa Muyama, Executive Vice President & Head of Turbine Products, Mitsubishi Hitachi Power Systems

ModeratorsRichard A. Dennis, Advanced Turbines Technology Manager, U.S. Department of Energy National Energy Technology Laboratory

Karen A. Thole, Department Head of Mechanical and Nuclear Engineering, Professor of Mechanical Engineering, Pennsylvania State University

ChairPiero ColonnaDelft University of Technology

Past ChairSeung Jin SongSeoul National University

Turbo Expo Committee LiaisonGeoff SheardAGS Consulting

MemberJames FreeNASA Glenn Research Center

MemberHany MoustaphaPratt & Whitney Canada / AÉROÉTS, École de Technologie Supérieure

Energy Conversion Segment LiaisonVinod PhilipSiemens Power and Gas

MemberAl VolponiPratt & Whitney

ASME IGTI Board

ASME IGTI 2016 Turbo Expo Conference CommitteeExecutive Conference ChairBill NewsomMitsubishi Hitachi Power Systems Americas, Inc.

Conference ChairTim LieuwenGeorgia Institute of Technology

Technical Program ChairJohn ChewUniversity of Surrey

Review ChairJaroslaw SzwedowiczGE Power

Vice Review ChairRay ChuppREC Consulting, LLC

Vice Review ChairZolti SpakovszkyMassachusetts Institute of Technology

Vice Review ChairMark TurnerUniversity of Cincinnati

Local Liaison ChairSeung Jin SongSeoul National University

Exhibitor RepresentativeDave PincinceTURBOCAM International

Board LiaisonGeoff SheardAGS Consulting LLC

10 | ASME 2016 TURBO EXPO

NETWORKING EVENTS

Grand OpeningEnergy and Propulsion in the Information AgeTurbo Expo Keynote & ASME IGTI Annual AwardsMonday, June 13, 2016 | 10:15 a.m. – 12:15 p.m.Grand Ballroom, 1st Floor North Side, COEX Center

PlenariesAsset Optimization and Monitoring in the Information AgeTuesday, June 14, 2016 | Grand Ballroom, First Floor North Side, COEX Center | 8:00 – 8:45 a.m.

Gas Turbine Manufacturing in the Energy AgeWednesday, June 15, 2016 | Auditorium, Third floor, COEX Center | 8:00 – 8:45 a.m.

Welcome Reception Monday, June 13, 2016 Harmony Ballroom and Diamond Hall, InterContinental Seoul COEX | 6:00 – 7:30 p.m.

All Turbo Expo registrants are invited to join their colleagues for complimentary light refreshments during the Monday evening event brought to you by the Turbo Expo 2016 Local Liaison Committee. Greet old friends, and meet the thinkers from around the world who are shaping the future of turbomachinery.

Daily Lunches All Technical Conference registrants’ badges will include daily lunches.

Expo Hall Receptions Tuesday & Wednesday, June 14 & 15, 2016 | 5:00 – 6:30 p.m.

All registered delegates are invited to the Expo Hall for complimentary refreshments and networking with industry colleagues, while viewing the exhibits of the industry’s top companies.

Early Career Engineer & Student Mixer Wednesday, June 15, 2016 | 6:45 – 8:00 p.m. Auditorium Lobby, COEX Center

A special and very popular event for rising engineers! Enjoy complimentary refreshments and network with fellow engineers, including a variety of turbomachinery industry personnel, as well as members of IGTI’s Committees.

Exposition Closing Ceremony Thursday, June 16, 2016 Expo Hall | 1:45 p.m.

Please join us as we announce the “Peoples’ Choice” booth display winners, the Student Poster winners, recognize outgoing Committee Chairs, the Young Engineer Turbo Expo Participation and Student Advisory Committee Travel Award recipients, and announce plans for Turbo Expo 2017 in Charlotte, North Carolina USA.

MARK YOUR CALENDAR FOR: ASME 2017 Turbo Expo June 26 – 30, 2017

Charlotte, North Carolina USAHope to see you there!

FINAL PROGRAM | 11

Tuesday, June 14, 20167:45 – 10:30 p.m.Sponsored by GE and Siemens

Female registrants are invited to join their colleagues for a complimentary networking event that will feature a talk by Li Zhang, GT Aux. Manager, SIEMENS Corp. Technology Gas Turbine Engineering, and Patricia Cargill, Principal Engineer, Fan & Compressor Aerodynamics, GE Aviation. During registration, be sure to select that you will be attending. Stop by the Information Desk in Registration if you have not confirmed your seat.

Li Zhang Siemens Corporate Technology Manager of GT Auxiliary System

Li started her career with 15 years technical experience focused on Energy industry fossil power plant customer order engineering design and project management at GE Energy Engineering Division and China National General Machinery Engineering Corporation in China.

In 2009, Li joined Siemens Corporate Technology Gas Turbine Engineering to build up a gas turbine auxiliary system design team in China. Functions include: GT fuel gas, ignition gas, flame monitoring, fuel oil, lube oil, hydraulics, cooling air, blow off, pneumatic, NOx water and purge water systems R&D tasks for new frame engine and customer order engineering project management. Li applied her leading skill and team orientation to fully integrate Siemens global R&D product/system design process; customer order engineering project implementation process from pre-engineering design phase to site issue solution phase; hazard & operability studies, and failure modes root cause analysis, effectiveness analysis studies into the China team.

Patricia Cargill GE Aviation Principal Engineer, Fan & Compressor Aerodynamics Patricia has 35 years’ experience in turbomachinery aerodynamics. She started her career at Garrett (now Honeywell), and moved to GE in 1987. She contributed to a broad range of commercial, military, and technology designs and tests, including the CFM56-7B compressor,

GE’s first 3D Aero compressor. She served as a manager for over ten years, and now enjoys a technical role where she consults on various aero programs and drives improvements in processes.

Women Working in Turbomachinery Networking Event

12 | ASME 2016 TURBO EXPO

ASME Turbo Expo 2017June 26-30, 2017 | Charlo�e, North Carolina. USA

Co-located with

asme.org/events/turbo-expo

FINAL PROGRAM | 13

ASME Turbo Expo 2017June 26-30, 2017 | Charlo�e, North Carolina. USA

Co-located with

asme.org/events/turbo-expo

Special Thanks to the ASME Turbo Expo 2016 Local Liaison Committee

Seung Jin Song, Chair, Seoul National University

Sungkyu An, Korea Midland Power Company Limited

Hyung Hee Cho, Yonsei University

Hyungrok Do, Seoul National University

Jin Zhang Feng, AVIC Commercial Aircraft Engine Co

Kwangyol Lee, Doosan Heavy Industries & Construction

Keun Ryu, Hanyang University

Young Chang Shon, Hanwha Techwin

Toshinori Watanabe, The University of Tokyo

Soo-Seok Yang, Korea Aerospace Research Institute

Supporting Publications

Participating Organizations

A standing committee of the®

2016 Aircraft Engine Technology Award Lecture Monday, June 13, 2016, Room 301, 2:30 p.m.

Turbine Blade Cooling Research at Texas A&M 1980 -2016 For outstanding contributions to the field of air breathing propulsion through inspiring leadership, education and research, having major impacts on operational capability, performance, and design.

Dr. Je-Chin Han is currently University Distinguished Professor and Marcus Easterling Endowed Chair Professor at Texas A&M University. He received his B.S. degree from National Taiwan University in 1970, M.S. degree from Lehigh University in 1973, and Sc.D. degree from M.I.T. in 1976, all in Mechanical Engineering. He has been working on turbine blade cooling, film cooling, and rotating coolant-passage heat transfer research for the past 40 years. He is the co-author of 220 journal papers and lead author of the book “Gas Turbine Heat Transfer and Cooling Technology.” He has served as editor, associate editor, and honorary board member for eight heat transfer related journals, and served as ASME K-14 Gas Turbine Heat Transfer Committee Chair (2004-2006) and ASME K-3 Heat Transfer Honors and Awards Committee Chair (2005-2006). He received the 2002 ASME Heat Transfer Memorial Award, the 2004 International Rotating Machinery Award, and the 2004 AIAA Thermophysics Award. He is a Fellow of ASME and AIAA.

Featured Lecture

Trusted to deliver excellence

We gained a reputation for engineering excellence, one detail at a time.

We know it’s the small things that make a big difference. In fact it goes a very long way towards explaining why Rolls-Royce has become a world-leader in power systems and services on land, at sea and in the air. With manufacturing and service facilities in 50 countries and customers in well over 150 countries, we place a great deal of importance on the detail in order to maintain the very highest standards that our name has become associated with. It’s what our clients have come to expect and we don’t do it lightly. Last year alone we invested close to £1billion in research and development of our products and services. And, like everything else we do, we did it one detail at a time.

www.rolls-royce.com

RR_TurboExpo_vFNL.indd 1 25/11/2014 17:14

16 | ASME 2016 TURBO EXPO

SAC Panel SessionCareers in TurbomachineryWednesday, June 15, 2016 | 4:00 – 5:30 pm | Auditorium

This panel session features established leaders in industry, academia, and government who have made important contributions to the development and our understanding of gas turbine engines. The panel will address the following:

· What does it take to be successful in each career path?· What challenges will students face entering these careers?· Within each career path, what types of opportunities are available?

PanelistsDr. Alexander Mirzamoghadam, Staff Engineer, Honeywell InternationalDr. Lamyaa El-Gabry, Professor, The American University of Cairo

Dr. Klaus Brun, Program Director, Southwest Research Institute

Dr. Hany Moustapha, Professeur et Directeur AÉROÉTS

Dr. Seung Jin Song, Professor, Seoul National University

Thank You ASME Turbo Expo Student Poster Judges!

The ASME IGTI Student Activity Committee would like to take this opportunity to thank the Turbo Expo Student Poster Judges for their diligent and meticulous judging efforts.

Dr. Tim Allison, Southwest Research InstituteProf. David Bogard, University of TexasDr. Klaus Brun, Southwest Research InstituteProf. Sergio Camporeale, Politecnico di BariDr. Ward de Paepe, Vrije Universiteit BrusselDr. Jason Dees, General ElectricMr. Zhirui Dong, General ElectricDr. Kihyung Kim, General ElectricDr. Stephen Lynch, Pennsylvania State UniversityProf. Ricardo Martinez-Botas, Imperial CollegeDr. Jacqueline O'Connor, Pennsylvania State UniversityProf. Guillermo Paniagua, Von Karman InstituteDr. Marc Polanka, Air Force Institute of TechnologyDr. Luca Porreca, MANAlessandro Ramaglia, Ansaldo-AlstomDr. Arnd Reichert, SiemensDr. Peter Smout, Rolls-Royce

STUDENT NEWS

Student Advisory CommitteeThe Student Advisory Committee, SAC, consists of Kathryn Kirsch (Chair), Jacob Snyder ( Vice Chair ) , Diogo Berta Pitz (Secretary) and John McClintic (Past Chair) , all of whom began their terms at the 2015 Turbo Expo student committee meeting in Montreal, Canada. Together, the four officers manage the committee, plan all student events and activities at Turbo Expo and represent the student community before the ASME IGTI Board. The SAC encourages all students and degree-seeking individuals to participate in the ASME IGTI Student Advisory Committee. We will be advertising more details about ASME 2017 Turbo Expo Conference very soon. ASME Turbo Expo hosts over 500 graduate and undergraduate students who present research findings, attend tutorials, visit the exhibition, and network with professionals.

SAC Tutorial SessionThe Art of the Peer Review Process: Best Practices for Crafting and Responding to Paper ReviewsTuesday, June 14 | 9:00 – 10:30 a.m. | E6

Dr. Karen A. Thole, Department Head of Mechanical and Nuclear Engineering, Professor of Mechanical Engineering, Pennsylvania State University

This tutorial session will discuss the importance of quality peer reviews to the technical community and give best practices for creating reviews that are beneficial to the author(s). Additionally, this tutorial will walk through the steps of the review process and will pose best practices for responding to paper reviews.  Discussion among session participants will be encouraged through the use of example paper reviews.

SAC Poster CompetitionTuesday, June 14, 2016 | 12:30 – 2:30 p.m.The Student Advisory Committee is once again sponsoring a student poster session at ASME Turbo Expo 2016. Student posters will be on display on the main exposition floor on Tuesday, June 14th. Student poster finalists will be on display on Wednesday, June 15th from 12:30 p.m. – 2:30 p.m. Be sure to stop by the poster session to see the results of their work and encourage them to become active in ASME. Cast your vote for the People’s Choice Best Student Poster – enter your selection at the computer station at the entrance to the exhibit hall.

This year the cash prizes will be: 1st place - $1000, 2nd place - $500, and People’s Choice - $250.

FINAL PROGRAM | 17

Joshua AndersonThe University of Texas

Valeria AndreoliPurdue University

Seung Il BaekPenn State

Bogdan Cezar CernatVon Karman Institute / UCL Louvain

Kyle ChavezThe University of Texas

Kenneth ClarkPenn State

Cis De MaesschalckPurdue - VKI

Brandon EalyUniversity of Central Florida

Masha FolkUniversity of Cambridge

Silvio GeistTechnical University of Berlin

David Gonzalez CuadradoPurdue University

Niharika GurramUniversity of Oxford

Shane HaydtPenn State

Qiangqiang HuangTsinghua University

Nikola KafedzhiyskiKTH Royal Institute of Technology

Ramesh KumarUniversity of Surrey

Pradeep Kumar SrinivasanKTH Royal Institute of Technology

Jan KamenikUniversity of Southampton

Eric LangePenn State

Fangyuan LouPurdue University

Zhiping MaoDuke University

Georg Atta MensahTechnical University of Berlin

Xin MiaoCity University London

Marina Montero CarreroVrije Universiteit Brussel

Sulfickerali Noor MohamedUniversity of Surrey

Ikenna Anthony OkaroNewcastle University

Marcel OttoUniversity of Central Florida

Utkudeniz OzturkPolytechnic University of Catalonia

Giteshkumar PatelLappeenranat University of Technology

Joseph Robert SaverinTechnical University of Berlin

2016 Student Advisory Committee Travel Award (SACTA)

Ali AfzalifarLappeenranta University of Technology

Travis CableTexas A&M University

Meera DaySouthern Methodist University

Jeffrey DefoeUniversity of Windsor

Chiara GastaldiPolitecnico di Torino

Giacomo GattiPolitecnico di Milano

David HolstTechnical University Berlin

Tobias HummelTechnical University of Munich

Simon JacobiUniversity of Oxford

Peter KaluzaRWTH Aachen University

Daria KolmakovaTechnical University of Munich

Atanu Kumar KunduLund University

Nguyen LaTrayUniversity of Texas at Arlington

Yogini PatilLappeenranta University of Technology

Julien PohlUniversity of Leeds

Robin PrenterThe Ohio State University

Jorge SaavedraPurdue University

Swati SaxenaGE Global Research Center

Robert SchroederSargent & Lundy

Vrishika SinghTU Delft

2016 Young Engineer Turbo Expo Participant Award (YETEP)

Wednesday, June 15, 2016 | 6:45 – 8:00 p.m. Auditorium Lobby, COEX Center

A special and very popular event for rising engineers! Enjoy complimentary refreshments and network with

fellow engineers, including a variety of turbomachinery industry personnel, as well as members of IGTI’s

Committees and representatives from the sponsor Doosan Heavy Industries & Construction.

Early Career Engineer & Student Mixer

Deepanshu SinghIIT Delhi

Prashant SinghVirginia Tech

Curtis StimpsonPenn State

Mohammadreza TahanUniversiti Teknologi Petronas

Hui TangUniversity of Bath

Zhiduo WangXi'an Jiaotong University

Juliane WendlerTechnical University of Berlin

Steven WhitakerThe Ohio State University

Michelle WoodUniversity of Houston

Manuel WürthTechnical University of Munich

Lisa ZanderTechnical University of Berlin

18 | ASME 2016 TURBO EXPO

Pascal Bader, Graz University of Technology

Measurement and Simulations of Flat-Plate Boundary Layers in Accelerated Flow

Ali Baghchehsara, Hochschule Bremen

Non-axial Hybrid Solar Micro Turbine Concept

Sabine Bauinger, Graz University of Technology

Impact of Different Shroud Configurations on Leakage Flow

Michael Betz, Technical University of Munich

Impact of Damper Parameters on the Stability Margin of an Annular Combustor Test Rig

Bogdan C. Cernat, Von Karman Institute For Fluid Dynamics

Active Tip Leakage Flow Control in High Pressure Turbines

Cong Truong Dinh, Inha University

Effects of Air Injection on Aerodynamic Performances of a Single-Stage Transonic Axial Compressor

Thomas Eckert, University of Applied Sciences Munich

Numerical Analysis of a Transonic Centrifugal Turbo Compressor with Various Diffusor Designs for the Operation in a Hybrid Sorption/Compression Heat Pump Cycle

Silvio Geist, Technische Universität Berlin

Numerical Investigation on Flutter Stability of an Aerodynamically Mistuned Oscillating Compressor Cascade

Niharika Gurram, University of Oxford

Study of Film Cooling in the Trailing Edge Region of a Turbine Blade

Balbina Hampel, Technische Universität München

Low NOx Combustion of Gaseous Hydrogen in a Combustion Chamber Based on the Principle of Cyclic Periodic Mixing

Amir Ibrahim, University of Oxford

Development of an Air-riding Flexible Face Seal

Ikhee Jo, Hanyang University

Test Apparatuses for Identification of Rotordynamic Coefficients and Drag Power of Externally Pressurized Porous Air Bearings

Jan Kamenik, Jan Kamenik

NASA Rotor 37 Uncertainty Quantification and Sensitivities

Joshua Keep, The University of Queensland

Development of a space marching throughflow code for radial inflow turbines

Hanjong Kim, Pusan National University

Fatigue assessment of Inconel 625 tubes at both room and elevated temperatures.

Gisu Mun, Pusan National University

Compact Heat Exchanger for High Temperature and High Pressure in Gas Turbine Engine

Jong-Chan Kim, Korea Aerospace University

A Study of the Effect of Turbulent Burning Velocity Models on the Annular Premixed Combustor using LES and Flamelet Approach

Kyuman Kim, Hanyang University

Rotordynamics Performance of Automotive Turbochargers: Vibration Characteristics Comparison between Fully Floating Ring Bearings and Semi-Floating Ring Bearings

Nahyun Kim, Korea Maritime and Ocean university

Structural Integrity Evaluation for Operating Conditions of Heat Exchanger in Aero Engine

Viktoriia Klymenko, Korea Institute of Science and Technology

Determination of the Characteristics of Foil Bearing with Fiber Mesh Structure

Matthias Kunick, Zittau/Goerlitz University of Applied Sciences

The New Spline-Based Table Look-Up Method (SBTL) for the Fast Calculation of Real Fluid Properties in CFD Simulations of Steam Turbines

Jung Shin Park, Korea Aerospace University

Heat Transfer and Aerodynamic Loss near a Gas Turbine Blade Tip with a Partial Cavity

Ye Jee Kim, Korea Aerospace University

Application of DBD Plasma to the Film Cooling on a Flat Plate with a Rectangular Slot

Jeong Jin Lee, Inha university

Numerical study on the influence of inter-stage flow addition on steam turbine performance

Seulbi Lee, Pusan National University

Fracture behaviors of Brazed Alloy 625 Thin Tube Specimens under cyclic loading

Seung Yeob Lee, Korea University

Numerical Investigation on a Turbine Exhaust Diffuser Performance with respect to End-wall and Strut Angles

Lei Li, Nanyang Technological University

Effect of Entropy Waves on Transient Energy Growth of Flow Disturbances in Triggering Thermoacoustic Instability

James Little II, University of Central Florida

Numerical Analysis Of Blade Vibration Forced Response Predictions

Student Poster Session Presenting Authors

FINAL PROGRAM | 19

Sang-Bum Ma, Inha University

Effects of discrete cavities on aerodynamic performance of a centrifugal compressor

Zhiping Mao, Duke University

Interaction Effect of Forced Response and Flutter Phenomena of a Compressor Stage

Andrew Messenger, Durham University

Development of a Dynamic Clearance Seal in a Rotating Facility

Mohsen Modir Shanechi, The University of Queensland

Design of Radial-Inflow Turbine Using Moderate-Temperature and High-Density Working Fluids for Concentrating Solar Power Systems

Maria Pia Monterossi, Politecnico di Torino

A New Test Rig Facility To Study Aeronautic Low Pressure Turbine Thermal Behavior

Mehdi Khazaeian, K.N.Toosi University of Technology

In-situ multi-scale damage observation in APS Thermal Barrier Coatings (TBC) using Digital Image Correlation and Acoustic Emission

Ehsan Saberi, K.N.Toosi University of Technology

Predicting creep rupture and creep crack growth using a unified mechanism based creep damage model

Marcel Otto, University of Central Florida

Heat Transfer in Rib-turbulated Pin Fin Arrays

Tarannom Parhizkar, Sharif University of Technology

Operation scheduling optimization framework for micro gas turbines based on system degradation

Seong Hyun Park, Pusan National University

Experimental study on the simulation of ice blockage at the inlet part of Fuel Oil Heat Exchanger

Pedro Romero, Technische Universität München

Design Concept and Workflow of a Second Stage Combustor Test Rig

Florian Schönleitner, Graz University of Technology

On the Influence of the Rotor Disk regarding the Modal Characteristics of a Low Pressure Turbine Rotor Blading

Nicolai V. Stadlmair, Technische Universität München

Thermoacoustic Analysis of Water Injection in a Lean Premixed, Swirl Stabilized Flame under Atmospheric Conditions

Mohammadreza Tahan-Bouria, Universiti Teknologi PETRONAS

Real-Time Performance-Based Automated Fault Detection and Isolation of Gas Turbine Engines using Multi-Nets Evolutionary Adaptive Neuro-Fuzzy Inference System

Howon Yi, Hanyang University

Measurements of Static Load Structural Parameters in Second Generation Bump-type Foil Journal and Thrust Bearings

Lisa Zander, TU Berlin

Optimization of Combustible Mixtures for Shockless Explosion Combustion

Student Poster Session Presenting Authors

20 | ASME 2016 TURBO EXPO

The Boxer EnvironmentSupports End-to-endParallel Simulation

www.cambridgeflowsolutions.com

• Fullly scalable to leverage current and future HPC

• Powerful, Reliable and Easy to use

• Tackles complex, real-world applications

• Simple integration for automated optimisation, design and analysis

• Delivers greater capability and productivity, at reduced cost

Access now the power of distributed parallel computing

VISIT US AT BOOTH 1103

TryBOXERM

esh

3.7 now!

Highly efficient higher-order LES

Fuel Injector - Gas Turbine

Conjugate Thermal Simulation

FINAL PROGRAM | 23

Networking Coffee/Danish for Presenters and Session OrganizersMonday, June 13 – Friday, June 17 | 7:15 – 8:00 a.m. | Hall C4

On the day of your scheduled presentation, a table will be reserved for your session. Meet with the other session participants and discuss session logistics. All session organizer materials will be distributed at this meeting. Complimentary coffee and pastry provided.

Presentation UploadsPresenters (authors, panelists, tutorial instructors, lecturers) should plan to upload their presentations only on the computer in their session room. Please arrive 15 to 30 minutes prior to your session to upload your presentation. Presentations may be uploaded from a CD-ROM or USB flash drive. There will not be a central network server for the sessions.

Audiovisual Equipment ProvidedStandard AV equipment provided in meeting rooms:LCD ProjectorLaptop ComputerProjection ScreenMicrophone(s)Wireless Remote/Pointer

Speaker Ready RoomRoom 310Sunday, June 12 1:00 p.m. – 6:00 p.m.Monday, June 13 7:00 a.m. – 5:30 p.m.Tuesday, June 14 7:00 a.m. – 5:30 p.m.Wednesday, June 15 7:00 a.m. – 5:30 p.m.Thursday, June 16 7:00 a.m. – 5:30 p.m.Friday, June 17 7:00 a.m. – 3:30 p.m.

RegistrationAs a non-profit organization, ASME requires all presenters to register for the conference and pay an appropriate fee. We are pleased to offer all presenters the discounted ASME Member registration rate of $1,190 for 5-Day or $975 for 3-Day. Onsite registration is located in Hall C4.

Badge RibbonsRole and attendance ribbons are available at the Information Desk in Registration. See the display for available options.

Final Papers DVD/Paper Printing StationsAll Technical Conference registrants are eligible to receive a DVD con-taining the collection of the technical papers accepted for presenta-tion and publication plus online access. Presentation, such as panels or posters, that do not have an accompanying paper are considered to be “oral Presentation Only” and do not appear in the system. Please note that this is NOT the official proceedings of the Conference, which is published after the Conference and is also made available online on the ASME Digital Collection at http://asmedigitalcollection.asme.org. As such, papers that appear in the system may not be cited until after the official Proceedings have been published. Registered ASME Turbo Expo 2016 technical conference attendees may view and print accepted conference papers at the 2016 Paper Printing Station in the exhibit hall.

Need Assistance?ASME staff (red badges) and Session Assistants (yellow Assistant badges) are circulating the session room hallways to provide assis-tance as needed.

Session Participant Information

COEX Convention Center

24 | ASME 2016 TURBO EXPO

THE EXPOSITION

2016 Exhibit DirectoryRound out your conference experience by spending time Tuesday through Thursday in the exhibit hall featuring the latest technology offered by leading companies in the industry and an exhibitor presentation stage. Lunches and receptions in the exhibit hall each day will provide relaxed, yet focused networking opportunities.

Exposition Open: Tuesday, June 14……12:30 p.m. - 6:30 p.m.Wednesday, June 15……12:30 p.m. - 6:30 p.m.Thursday, June 16……11:30 a.m. - 2:30 p.m. Don’t miss the Exhibit Closing Ceremony at 1:45 p.m.

Table of Contents Exhibitor Booth Listings………………Pages 28-32Product Categories………………….. Pages 34-35

Thank you to our Exhibit Advisory Committee. Please stop by and visit with our EAC members and give them your suggestions and feedback for making the Turbo Expo Exposition an even better event. A complete listing can be found on page 25. If you are interested in joining this committee, contact the ASME IGTI Expositions Department at [email protected].

If you are interested in exhibiting at the 62nd ASME Turbo Expo in Charlotte, North Carolina next June, contact ASME IGTI at [email protected] or stop by the ASME IGTI Exhibit Sales Office in the exhibit hall to secure your booth or one of the sponsorship opportunities. We also have space and sponsorship opportunities for the 2017 Gas Turbine India Conference and Exposition next December in Bangalore.

Reminders:• No photographs can be taken in the exhibit hall without permission of Show Management and/or the exhibiting company.• Place your votes for the People’s Choice Best Booth Award and the People’s Choice Best Student Poster at the entrance of the exhibit hall.• See security personnel for emergencies and first aid assistance.

COMBUSTORSGAS TURBINES

GENERATORSCOMPRESSORS HEAT EXCHANGERS

PUMPS

PLEASE VISIT US AT TURBO EXPO AT BOOTH 400

DISCOVER BETTER DESIGNS. FASTER.MULTIDISCIPLINARY SIMULATION FOR CLEAN, EFFICIENT ENERGY AND ECONOMICAL, RELIABLE POWER

[email protected]

cdadapcoTE2016.indd 1 10/01/2016 20:27

FINAL PROGRAM | 25

Every visitor, delegate and exhibitor at the EXPO can attend any of the following presentations, FREE OF CHARGE. Each is delivered by one of the Exhibitors at the EXPO - all of them leading experts in their field.

Tuesday, June 14

1:00 – 1:30 pm Demonstration of Concepts NREC’s throughflow solver solution method for fast design and accurate analysis of axial turbomachinery. The throughflow solver uses a state-of-the-art CFD based method that is fully functional across subsonic, transonic, and supersonic domains. The product can be used in both design and analysis modes and is closed coupled to Concepts NREC geometry design program AxCent®.

1:45 – 2:15 pm The Application of Brush Seals to Increase Reliability and Efficiency in Process Steam Turbines presented by Peter Zanini from Waukesha Bearings Corporation

2:30 – 3:00 pm Current Status of Alternative Fuels and Future Directions presented by Chris Lewis from the University of Sheffield

3:15 - 3:45 pm SUNG-IL TURBINE CO., LTD.

4:00 – 4:30 pm Integrated Turbomachinery Design and Analysis with ANSYS

4:45 – 5:15 pm AxSTREAM, the Most Integrated and Comprehensive Turbomachinery and Thermodynamic Cycle Design, Analysis and Platform presented by Valentine Moroz from SoftinWay Inc

Wednesday, June 15

1:00 – 1:30 pm Best practices for Advanced Gas Turbine Blading Upgrades presented by Abdul Nassar from SoftinWay Inc

1:45 – 2:15 pm Rotordynamics Analysis with ANSYS

2:30 – 3:00 pm Resolving Vibration Issues Using ISFD® Technology presented by Jong Kim, PhD, from Waukesha Bearings Corporation

3:15 - 3:45 pm Overview of CRUNCH CFD Capabilities for Non-Ideal Fluid Combustion and Turbomachinery Applications presented by Raj Sinha from CRAFT Tech (UIT)

4:00 – 4:30 pm Gas Turbine Combustion Simulation with ANSYS CFD

4:45 – 5:15 pm AxSTREAM Net - Software for Simulation of Cooling System of Gas Turbines presented by Clement Joly from SoftinWay Inc

Thursday, June 16

12:30 - 1:00 p.m. PCHE Recuperator Design and Cost Influence on Economic of sCO2 Cycles presented by Dereje Shiferaw from Heatric

1:45 - 2:30 p.m. ASME Turbo Expo Closing Ceremony

Turbo Expo Exhibit Advisory Committee RosterMission: To assist in the growth and expansion of the Turbo Expo exhibit with continued support to exhibiting companies and ASME IGTI expositions staff. Representatives serve as experts for fielding questions and provid-ing resources and initiatives for continued success of the exposition.

Kim AikenParker Hannifin Corporation+1 630-553-8440 [email protected]

Melvin ByrdMeasurement Specialities+1 757-766-4227 [email protected]

Travis CarriganPointwise, Inc.+1 817-377-2807 [email protected]

Dr. Leonid Moroz SoftInWay Inc.+1 781-685-4942 [email protected]

Dave PincinceTurbocam International +1 603-905-0200 [email protected]

Dr. Benjamin O'SheaPräwest Präzisionswerkstätten GmbH & Co. KG.+49 421 / 658 51 – 0 [email protected]

If you are interested in joining this committee, contact Kristin Barranger at [email protected].

Stage Presentation Schedule

26 | ASME 2016 TURBO EXPO

Exhibit Hall Floorplan

Lunch

Lunch Entrance

Reception

1412

1411

1405

1404

1402

1400

1313

1312

1213

1212

1013

1012

1009

1008

1112

1108

1107 1007

1005

1003

1000

1106

1105

1103

1101

1100

301

300

1309 1209

12041307

1306

1203

1201

12001300

1406

Reception

Entrance

Student Posters

Stag

e 912

911811

712613

612

513

512412

311 211 211

609

608

606

509 409

406507

506

403

500 400

605

603

910

909

908

907

906

905

810

809

808 708

706208

207307

705

704

703

204305

304

302

101

107

105

104

102

201

200

202

600

806

805

803904

903

800

THOROUGHLY PROVENWWW.SOLARTURBINES.COM

©2014 Solar Turbines Incorporated. All rights reserved. AD 2015 ASME

FINAL PROGRAM | 27

Aerodyn /AerodynLtd/ @aerodyneng Aerodyn Ltd

Aeroprobe Corporation /aeroprobe/ @AeroprobeCorp Aeroprobe Corporation

ASME Turbo Expo /ASMEIGTI @IGTI ASME International Gas Turbine Institute

Calnetix Technologies /Calnetix-Technologies- 639763296157131/?fref=nf Calnetix Technologies

Diesel & Gas Turbine Worldwide @dgtww

Flownex Simulation Environment Flownex Simulation Environment

Gas Turbines Asia-Pacific @Informa_Oz Informa Australia

IfTA GmbH @IFTA_GmbH

MMP Technology /MMPTechnology/ @MMPtechnology

MTU Aero Engines /MTUAeroEnginesKarriere/ MTU Aero Engines

OROS @OROS_NV OROS

PBS Velka Bites /pbsvb PBS Velka Bites, a.s.

Waukesha Bearings Corporation Waukesha Bearings Corporation

Exhibitor Social Media

Gyeongbokgung Palace

Reach 140,000 ASME Members!Write a technical article for the Global Gas Turbine News! ASME IGTI is looking for timely technical content related to the gas turbine/turbomachinery industry. Articles should be approximately 800 to

1,000 words and non-commercial in nature.

Submit your article today to [email protected]. PLEASE REFER TO ONLINE EXHIBITOR

DIRECTORY FOR EXHIBITING COMPANY

LISTINGS.

Reach 140,000 ASME Members!Write a technical article for the Global Gas Turbine News! ASME IGTI is looking for timely technical content related to the gas turbine/turbomachinery industry. Articles should be approximately 800 to

1,000 words and non-commercial in nature.

Submit your article today to [email protected].

30 | ASME 2016 TURBO EXPO

3D INSPECTION AND MEASUREMENTSAerodynAeroprobe CorporationFlownex Simulation EnvironmentPhotron LimitedVectoflow GmbH

AERODERIVATIVE GAS TURBINE REPAIR & OVERHAULLiburdi Turbine Services Inc.MTU Aero Engines

AIR SYSTEMSFlownex Simulation EnvironmentMTU Aero Engines

ANALYTICALAPEX Turbine Testing Technologies Flownex Simulation EnvironmentMTU Aero EnginesPhotron LimitedWaukesha Bearings Corporation

ANCILLARY EQUIPMENTParker HannifinPhotron Limited

AUTOMATED 3D INSPECTION AND MEASUREMENTSAerodyn

AXIAL & CENTRIFUGAL COMPRESSORSAerodynCFturbo Software & Engineering GmbHHanwha TechwinMTU Aero Engines

COMPONENTSAeroprobe CorporationMTU Aero EnginesParker HannifinUniversity of Sheffield, TheVectoflow GmbHWaukesha Bearings Corporation

CONSULTING & ENGINEERING SERVICESAerodynAeroprobe CorporationCFturbo Software & Engineering GmbH

Flownex Simulation EnvironmentLiburdi Turbine Services Inc.MTU Aero EnginesVacuum Process Engineering, Inc.Waukesha Bearings Corporation

CONTROLS/INSTRUMENTATIONAerodynFlownex Simulation EnvironmentIfTA GmbHMTU Aero EnginesOROSParker HannifinPentair Technical Solutions UK LtdTorquemeters Ltd.Vectoflow GmbH

DESIGN PROCESS & METHODOLIGIESFlownex Simulation EnvironmentHaynes International, Inc.MTU Aero EnginesPhotron LimitedVectoflow GmbH

EDUCATIONFlownex Simulation EnvironmentPhotron LimitedUniversity of Sheffield, The

EXPANDERSCalnetix TechnologiesHanwha Techwin

FANS & BLOWERSCFturbo Software & Engineering GmbHHanwha Techwin

FILTERSParker Hannifin

FUEL SYSTEMSCalnetix TechnologiesParker HannifinUniversity of Sheffield, The

GAS TURBINESAerodynAPEX Turbine Testing Technologies Calnetix TechnologiesHaynes International, Inc.IHI Corporation

Kawasaki Heavy Idustries, Ltd.Liburdi Turbine Services Inc.MTU Aero EnginesOPRA Turbines BVUniversity of Sheffield, The

GEAR TYPE COMPRESSORSCalnetix TechnologiesHanwha Techwin

GOVERNMENT ORGANIZATIONCalnetix Technologies

ISOTHERM COMPRESSORSCalnetix Technologies

LASER MACHININGVectoflow GmbH

LASER WELDINGAerodyn

MAINTENANCE AND OPERATIONAPEX Turbine Testing Technologies Flownex Simulation EnvironmentLiburdi Turbine Services Inc.MTU Aero EnginesOROS

MANAGEMENT & MAINTENANCE OF ROTATING EQUIPMENT Flownex Simulation EnvironmentTorquemeters Ltd.

MANUFACTURING PROCESSESAeroprobe CorporationFlownex Simulation EnvironmentHaynes International, Inc.MTU Aero EnginesVacuum Process Engineering, Inc.Vectoflow GmbH

MICROSCOPE SYSTEMS AND DIGITAL IMAGINGPhotron Limited

MONITORING SOFTWAREAPEX Turbine Testing Technologies EGT Co., Ltd.Flownex Simulation EnvironmentIfTA GmbHPhotron LimitedTorquemeters Ltd.

Exhibitor Product Categories

FINAL PROGRAM | 31

MOTION CONTROL EQUIPMENTParker Hannifin

OEM GAS TURBINE/POWER TURBINECalnetix TechnologiesHaynes International, Inc.OPRA Turbines BV

OIL SYSTEMSFlownex Simulation EnvironmentMTU Aero EnginesParker Hannifin

PACKAGE/TURNKEY APPLICATIONSAerodynParker HannifinVacuum Process Engineering, Inc.

PROCESS CONTROL SYSTEMSFlownex Simulation Environment

PUBLICATIONEnergy-Tech Magazine

SERVICE FOR TURBINES & COMPRESSORSAPEX Turbine Testing Technologies Calnetix TechnologiesFlownex Simulation EnvironmentParker Hannifin

SOFTWARE & COMPUTER HARDWAREAPEX Turbine Testing Technologies CFturbo Software & Engineering GmbHFlownex Simulation EnvironmentPhotron LimitedUIT Inc

SOLARHaynes International, Inc.

STEAM TURBINESCalnetix TechnologiesFlownex Simulation EnvironmentTurboPowerTech

TESTINGAerodynAeroprobe CorporationAPEX Turbine Testing Technologies Flownex Simulation EnvironmentMTU Aero EnginesNotre Dame Turbomachinery LaboratoryOROSPhotron LimitedTorquemeters Ltd.University of Sheffield, TheVacuum Process Engineering, Inc.Vectoflow GmbHWaukesha Bearings Corporation

VACUUM HEAT TREATING AND BRAZING SERVICESVacuum Process Engineering, Inc

WATERJET CUTTING/DRILLINGHaynes International, Inc.

Exhibitor Product Categories

People's Choice AwardEnter for a chance to win 1 of 3 USD cash prizes by Casting Your Ballot for the People’s Choice Best Booth Award Winners.$100 $250 $500

Three cash prize winners will be announced during the Closing Ceremony in the Exhibit Hall on Thursday, 1:45 pm.

Cast Your Ballot for:• Most creative display design• Best display of technology• Best overall exhibit• Best method of crowd attraction

One vote per Registrant. Entrant must be present to win at the Closing Ceremony. To qualify for the prize draw-ings, votes must be cast by 1:00 p.m. on Thursday, June 16.

Place your vote for both categories:

Large Display (for booths 36sm and larger)

AND

Small Display (for booths less than 18sm in size)

Congratulations to the 2015 People’s Choice Award Winners

Large Display: GE

Small Display: Liburdi Turbine Services, Inc.

Vote Now for Your Chance to Win! Ballot kiosk at the entrance of the exhibit hall! Stop by now!

Cast your ballot for the People's Choice Best Student Poster winner!

32 | ASME 2016 TURBO EXPO

AWARD WINNERS

Congratulations to all award recipients and thank you to all ASME IGTI committee award representatives whose work assists the awards and honors chair and the reading committee in the recognition of important gas turbine technological achievements.

2016 ASME R. Tom Sawyer Award Awarded to an individual who has made important contributions to advance the purpose of the gas turbine industry and the Internation-al Gas Turbine Institute over a substantial period of time. The contri-bution may be in any area of Institute activity, but must be marked by sustained forthright efforts.Dr. Nicholas Cumpsty, Imperial College London

2014 ASME Gas Turbine Award The Gas Turbine Award was established in 1963 to be given in recogni-tion of an outstanding contribution to the literature of noncombustion gas turbines thermally combined with nuclear or steam power plants.

RECEIVING THE 2014 GAS TURBINE AWARD FOR THEIR PAPER: “The Effect of Endwall Manufacturing Variations on Turbine Performance”Dr. Robert Grewe, Siemens, Dr. Robert Miller, University of Cambridge, and Dr. Howard Hodson, Whittle Laboratory

2014 John P. Davis Award RECEIVING THE 2014 John P. Davis AWARD FOR THEIR PAPER: “Modification of the Rolls-Royce Model MT5S Gas Turbine Engine Fuel Nozzle for Extended Fuel Flow Rates”Jack Halsey, Rolls-Royce, Leonard L. Overton, Jr., Rolls-Royce, Dr. Philip E. O. Buelow, United Technologies Corporation, and David Bretz

2016 Industrial Gas Turbine Technology Award For outstanding contributions and industry leadership in low emissions combustion system research, design, development, and deployment.Dr. Klaus Brun, Southwest Research Institute

2016 Dilip R. Ballal Early Career Award Awarded to an individual who has made significant contributions in the gas turbine industry within the first five years of their career.Dr. Carl Sangan, University of Bath

2016 Aircraft Engine Technology Award For outstanding contributions to the field of air breathing propulsion through inspiring leadership, education, and research, having major impacts on operational capability, performance, and design.Dr. Je-Chin Han, Texas A&M

For more details on the Award Winners, please refer to the 2016 Awards Program. Programs will be avail-able during the Opening Session on Monday, June 13.

Upcoming Award Opportunities

2016-2017 IGTI STUDENT SCHOLARSHIPThe deadline to submit an application is June 15, 2016.In the 2016-2017 school year up to 20 scholarships at $2,000 (USD) each will be awarded to qualifying students registered at an accredited university (either in the U.S. or elsewhere).

2017 DILIP R. BALLAL EARLY CAREER AWARDNominations for the 2017 award are due to [email protected] by August 1, 2016. The Early Career Award is intended to honor individuals who have outstanding accomplishments during the beginning of their careers. An early career award is intended for those starting a profes-sional career, which is typically after a relevant terminal degree: BS, MS, or PhD. A criterion of seven-years-from-degree will be used to define the nominee’s eligibility. The nominee must receive the award prior to the completion of the seventh year beyond the terminal degree.

The award consists of a plaque, funds to support the travel and registration costs to Turbo Expo, free ASME membership registration for five years, and a US $2000 honorarium. The recipient of the Early Career Award will be honored at Turbo Expo 2017.

For more information on how to submit a nomination for an award, visit https://community.asme.org/international_gas_turbine_insti-tute_igti/w/wiki/4029.honors-and-awards.aspx.

FINAL PROGRAM | 33

N Seoul Tower

34 | ASME 2016 TURBO EXPO

COMMITTEE INFORMATION

Aircraft EngineChair: Outgoing - Keith BoyerIncoming Chair: Wing NgIncoming Vice Chair: Wilfried Visser

CeramicsChair: Outgoing - Gregory Morscher Incoming Chair: Sai Sarva Incoming Vice Chair: Jun Shi

Coal, Biomass & Alternative FuelsChair: Outgoing - Simone Colantoni Incoming Chair: Ajay Agrawal Incoming Vice Chair: Pierre Q. Gauthier

Combustion, Fuels & EmissionsChair: Ibrahim Yimer Vice Chair: Mike Klassen

Controls, Diagnostics & InstrumentationChair: Outgoing - Don Simon Incoming Chair: Lorenzo Ferrari Incoming Vice Chair: Sebastian Borguet

Cycle InnovationsChair: Vassilios Pachidis Vice Chair: David Sánchez

EducationChair: Outgoing - August Rolling Incoming Chair: Sabri Deniz Incoming Vice Chair: Devin O'Dowd

Electric PowerChair: Outgoing - John Gülen Incoming Chair: Jeffrey A. Benoit Incoming Vice Chair: Seyfettin C. (John) Gulen

Fans and BlowersChair: Geoff Sheard Vice Chair: Alessandro Corsini

Heat TransferChair: Outgoing - Nirm Nirmalan Incoming Chair: Phil Ligrani Incoming Vice Chair: John Blanton

Industrial & CogenerationChair: Mustapha Chaker Vice Chair: Yiguang Li

Manufacturing Materials & MetallurgyChair: Outgoing - Laurent Cretegny Incoming Chair: Ashok Koul Incoming Vice Chair: Douglas Nagy

MarineChair: Desiree Deshmukh Vice Chair: Jack Halsey

Microturbines, Turbochargers & Small TurbomachinesChair: Jeffrey Armstrong Vice Chair: Keun Ryu

Oil & Gas ApplicationsChair: Tim Allison Vice Chair: Michele Pinelli

ORC Power SystemsChair: Jos van Buijtenen Vice Chair: Carsten Trapp

Steam TurbineChair: Thomas Thiemann Vice Chair: Ivan McBean

Committee Chairs and Vice Chairs

Structures & DynamicsChair: Outgoing - Michael Enright Incoming Chair: Harald Schoenenborn Incoming Vice Chair: Jerzy T. Sawicki

Student AdvisoryChair: Outgoing - Katie Kirsch Incoming Chair: Jacob Snyder

Supercritical CO2 Power CyclesChair: Klaus Brun Vice Chair: Eric Clementoni

TurbomachineryChair: Pat Cargill Vice Chair: Ricardo Martinez-Botas

Wind EnergyChair: Ken Van Treuren Vice Chair: George Pechlivanoglou

NUMECA’s Lunch and Learn SessionTuesday, June 14 | 12:30 p.m. Auditorium Room 1A&B

Ancillary Events

You are invited to attend NUMECA’s Lunch & Learn Session. During this free lunch, our technical experts will provide you with a detailed overview of our brand new solutions for turbomachinery design and analysis.

FINAL PROGRAM | 35

Committee Meeting Schedule

Group Date Time LocationAircraft Engine Committee Thursday, June 16 6:00 - 7:30 PM E1ASME IGTI Board Meeting Sunday, June 12 1:00 - 5:00 PM 311ASME IGTI Board Meeting Friday, June 17 12:30 - 5:30 PM 311Ceramics Committee (Joint with MTST) Wednesday, June 15 6:00 - 7:30 PM E6Coal, Biomass & Alternative Fuels Committee Thursday, June 16 6:00 - 7:30 PM E5Combustion, Fuels & Emissions Committee Tuesday, June 14 6:00 - 7:30 PM E1Controls, Diagnostics & Instrumentation Committee Wednesday, June 15 6:00 - 7:30 PM E2Cycle Innovations Committee Thursday, June 16 6:00 - 7:30 PM E2Education Committee Tuesday, June 14 1:15 - 2:15 PM E1Electric Power Committee Not meeting during Turbo Expo.Fans and Blowers Committee Thursday, June 16 6:00 - 7:30 PM 317AGT India Chapter Meeting Wednesday, June 15 1:30 - 2:15 PM 317BHeat Transfer Committee Wednesday, June 15 6:00 - 7:30 PM 401Industrial & Cogeneration Committee Tuesday, June 14 6:00 - 7:30 PM E2Manufacturing Materials & Metallurgy Committee Tuesday, June 14 6:00 - 7:30 PM 317AMarine Committee Thursday, June 16 6:00 - 7:30 PM OffsiteMicroturbines, Turbochargers & Small Turbomachines Wednesday, June 15 6:00 - 7:30 PM E6(joint with Ceramics Committee)Oil & Gas Applications Committee Thursday, June 16 6:00 - 7:30 PM E3ORC Power Systems Committee Not meeting during Turbo Expo.Steam Turbine Committee Wednesday, June 15 6:00 - 7:30 PM E5Structures & Dynamics Committee Tuesday, June 14 6:00 - 7:30 PM E5Student Advisory Committee Thursday, June 16 5:30 - 7:00 PM E6Supercritical CO2 Power Cycles Committee Wednesday, June 15 6:00 - 7:30 PM E1Turbomachinery Committee Tuesday, June 14 6:00 - 7:30 PM 401Wind Energy Committee Thursday, June 16 6:00 - 7:30 PM 308C

Committee Point Contacts & Vanguard Chairs

Aircraft EngineKonstantinos KyprianidisMälardalen University

CeramicsGregory MorscherThe University of Akron

Coal, Biomass & Alternative FuelsSimone ColantoniGE Oil & Gas

Combustion, Fuels & EmissionsChristian Oliver PaschereitChair of Fluid Dynamics, Her-mann-Föttinger-Institut, TU Berlin

Controls, Diagnostics & InstrumentationLorenzo FerrariNational Research Council of Italy

Cycle InnovationsMario Luigi FerrariUniversity of Genoa

EducationSabri DenizLucerne University of Applied Sciences

Electric PowerJustin ZacharySamsung

Fans & BlowersAlessandro CorsiniSapienza University of Rome

Heat Transfer: Combus-tors (with Combustion, Fuels & Emissions)Marc PolankaAir Force Institute of Technology

Heat Transfer: Conjugate Heat TransferAtul KohliPratt & Whitney

Heat Transfer: Experimental Film CoolingSrinath EkkadVirginia Tech. University

Heat Transfer: Experimental Internal CoolingLamyaa El-GabryThe American University of Cairo

Heat Transfer: General Heat TransferJames P. DownsFlorida Turbine Technology, Inc.

Heat Transfer: Internal Air Systems & Seals (with Turbomachinery)Bijay K. SultanianTakaniki Communications, LLC

36 | ASME 2016 TURBO EXPO

Heat Transfer: Numerical Film CoolingMalak MalakHoneywell International

Heat Transfer: Numerical Internal CoolingDomenico BorelloUniversità di Roma Sapienza

Heat Transfer: Structures (with Structures & Dynamics)Thomas WeissRolls Royce Deutschland Ltd & Co. KG

Heat Transfer: TutorialsBijay K. SultanianTakaniki Communications, LLC

Industrial & CogenerationMustapha ChakerCB&I

Manufacturing Materials & MetallurgyLaurent CretegnyGeneral Electric

MarineDesiree DeshmukhUS Navy

Microturbines, Turbochargers & Small TurbomachinesJeffrey ArmstrongFlexenergy Energy Systems Inc.

Oil & Gas ApplicationsTim AllisonSouthwest Research Institute

Organic Rankine Cycle Power SystemsJos van BuijtenenTriogen B.V.

Steam TurbinesThomas ThiemannSiemens AG

Structures & Dynamics: Aerodynamic Excitation & DampingToshinori WatanabeUniversity of Tokyo

Structures & Dynamics: Bearing & Seal DynamicsKeun RyuHanyang University

Structures & Dynamics: Emerging Methods in Design & EngineeringChris HulmeGeneral Electric (Switzerland)

Structures & Dynamics: Fatigue, Fracture & Life PredictionMartin HughesSiemens Industrial Turbomachinery Ltd.

Structures & Dynamics: Probabilistic MethodsJeff BrownUS Air Force Research Laboratory

Structures & Dynamics: RotordynamicsJeffrey MooreSouthwest Research Institute

Structures & Dynamics: Structural Mechanics, Vibration & DampingLars Panning-von ScheidtLeibniz Universität Hannover

Student AdvisoryKathryn KirschPenn State University

Student PosterKathryn KirschPenn State University

Supercritical CO2 Power CyclesKlaus BrunSouthwest Research Institute

Turbomachinery: Axial Flow Fan & Compressor AerodynamicsNicole KeyPurdue University

Turbomachinery: Axial Flow Turbine AerodynamicsLuca PorrecaMAN Diesel&Turbo Schweiz AG

Turbomachinery: Design Methods & CFD Modeling for TurbomachineryKurt WeberRolls-Royce Corporation

Turbomachinery: Ducts & Component InteractionsSteven BurdPratt&Whitney Corp.

Turbomachinery: General InterestRicardo Martinez-BotasImperial College London

Turbomachinery: Multi-disciplinary Design Ap-proaches, Optimization & Uncertainty QuantificationIngrid LepotCenaero (Centre de Recherche en Aéronautique)

Turbomachinery: Noise & Innovative Noise Reduction (with Aircraft Engine)Jeff DefoeUniversity of Windsor

Turbomachinery: Radial Turbomachinery AerodynamicsJan EhrhardContinental Automotive GmbH

Turbomachinery: Un-steady Flows in TurbomachineryDale VanzanteNASA Glenn Research Center

Wind EnergyKenneth Van TreurenBaylor University

Committee Point Contacts & Vanguard Chairs

Dependable Services

Clock up to 20 percent longer time on wing with a Pratt & Whitney FMP. You’ll see lower total maintenance costs, better performance retention, improved reliability and higher residual value. Our advanced predictive analytics use big data to monitor performance and keep your engine on wing. Find out more at www.pw.utc.com.

PRATT & WHITNEY FLEET MANAGEMENT PROGRAM

Time on wing is our thing.

Client: Pratt & Whitney Commercial EnginesAd Title: Time on wing is our thing.Publication: Turbo Expo Program - Trim: 3.687” x 4.812” • Bleed: NA

34535_CE Aftermarket FMP_TurboExpoProgram_v3.indd 1 12/14/15 9:55 AM

FINAL PROGRAM | 37

Thank You to Workshop Instructors

Thank You ASME Turbo Expo Pre-Conference Workshop Instructors!

ASME IGTI would like to thank the following instructors for sharing their knowledge, skills and time with all the engineers attending this year’s ASME Turbo Expo Pre-Conference workshops:

Physics-Based Internal Air Systems ModelingDr. Bijay (BJ) K. Sultanian, Ph.D., PE, MBA, ASME Fellow, Founder & Managing Member – Takaniki Communications, LLC, Oviedo, Florida, USA, Adjunct Professor - University of Central Florida, Orlando, Florida, USA

Technology and Applications of Gas Turbine CoatingsDr. Purush Sahoo, Director, American Surface Modification, USA. Douglas Nagy, Manager IGT Components Repair, Liburdi Turbine Services

Uncertainty Quantification and TurbomachineryRichard Ahlfeld, Imperial College; Francesco Montomoli, Imperial College; Andrea Panizza, General Electric Oil & Gas

Introduction to Gas Turbine Performance Modeling with GSPOscar Kogenhop, Netherlands Aerospace Center; Edward Rademaker, Netherlands Aerospace Center

Gas Turbine Aerothermodynamics and Performance CalculationsSyed Khalid, Parametric Solutions Inc. 

Bongeunsa Temple

38 | ASME 2016 TURBO EXPO

COMMITTEE INFORMATIONREGISTRATION

Registration Location/HoursCOEX Center, Hall C4 Sunday, June 12 | 12:00 pm – 6:00 pmMonday, June 13 7:00 a.m. – 5:30 p.m.Tuesday, June 14 7:00 a.m. – 6:30 p.m.Wednesday, June 15 7:00 a.m. – 6:30 p.m.Thursday, June 16 7:00 a.m. – 5:30 p.m.Friday, June 17 7:00 a.m. – 3:00 p.m.

Registrants for TURBO EXPO Technical Conference receive:• Access to EVERY session in the Technical Conference• Final Papers DVD comprised of all papers published for Turbo Expo 2016 plus online access.• Certificate of Completion for Professional Development Hours (PDH’s)• Admission to the Opening Session - Keynote & ASME Awards Program (June 13)• Admission to Tuesday’s Plenary: Asset Optimization and Monitoring in the Information Age (June 14)• Admission to Wednesday’s Plenary: Gas Turbine Manufacturing in the Energy Age (June 15)• Welcome Reception (June 13)• Daily Lunch (June 13 – 17)• Room Exhibition (June 14 – 16)• Room Exhibit Hall Receptions (June 14 – 15)• Opportunity to attend Facility Tours

Free ASME MembershipNon-member 5-day and 3-day registrants, plus students are eligible to receive a complimentary one-year ASME membership. Registrants in this category will receive an email invitation within 90 days after the Show from ASME Membership with the invitation to join.

Badge/TicketsYour badge is encoded with all payments made through conference registration. It is your only ticket and must be presented for admission to ticketed functions.

SecurityFor security reasons, your badge must be worn at all official Turbo Expo functions including Technical Con-ference sessions, the Welcome Reception, the Keynote Session, luncheons and in the Exposition.

PDH CertificatesTechnical Conference delegates will receive their PDH (Professional Development Hours) certificate for atten-dance at ASME Turbo Expo 2016 in Seoul, South Korea by email within 3-weeks following the conference. (5-day = 32.5 PDHs, 3-day = 19.5 PDHs).

ASME Itinerary PlannerCreate your own personalized conference itinerary with the ASME Itinerary Planner Mobile App for the iPhone, iPad, Android, and Blackberry. Add technical sessions, committee meetings, special events, personal appointments, and tours to your schedule. For more information, and to download the mobile app, please go to https://www.asme.org/events/turbo-expo

Conference ProceedingsPrinted volumes of the official Conference Proceedings may be ordered after the Conference by emailing [email protected] or by calling 1-800-THE-ASME. All ASME Conference Proceedings are submitted for index-ing to the Engineering index, which publishes COMPEN-DEX, SCOPUS, and a host of other indexing databases. Proceedings are also submitted to ISI for indexing in the Thomson Reuters Conference Proceedings Citation Index. Only presented papers are submitted.

Technical PapersThe collection of the technical papers accepted for presentation and publication for ASME Turbo Expo 2016 are posted online. Presentation, such as panels or posters, that do not have an accompanying paper are considered to be “oral Presentation Only” and do not appear in the system. Please note that this is NOT the official proceedings of the Conference, which is published after the Conference and is also made available online on the ASME Digital Collection at http://asmedigital-collection.asme.org. As such, papers that appear in the system may not be cited until after the official Proceedings have been published. Technical conference attendees may view accepted conference papers at the 2016 Paper Printing Station in the exhibition.

Registration ReceptionSunday, June 12 | COEX, Hall C4 | 12:00 pm – 3:00 pm

Come early and beat the crowds while you enjoy Korean Rice Cakes and beer! Registration will remain open on Sunday until 6:00 pm.

Visit us at Turbo Expo – Booth #1400

• CycleDesign• PreliminaryDesign• Meanline+ThroughflowAnalysis• BladeDesign,Analysis+Optimization• CFD+FEA• DesignofExperiment +Optimization• PerformanceMaps• SecondaryFlowNetworkAnalysis• RotorDynamics+BearingDesign

TURBOMACHINERY MASTERED.

Software+EngineeringSolutions

AxSTREAM, the most integrated and comprehensiveTurbomachinery and Thermodynamic cycle design, analysis and optimization platform

40 | ASME 2016 TURBO EXPO

Joint Sessions

Aircraft Engine with TurbomachineryWC-1-8, Room 327, Propellers and Open Rotors

FB-1-1, Room E4, Inlets and Operability

Aircraft Engine with Heat TransferThC-1-5, Room E4, Numerical and Experimental Investigations of

Aero-engine Oil System Components

Cycle Innovations with TurbomachineryFA-6-5, Room 402, Turbomachinery Design Aspects in Cycle Innovation

Heat Transfer: Combustors with Combustion, Fuels & EmissionsTC-17-2, Room 307B, Combustor Liner Cooling - Numerical and Optimization

WC-17-1, Room 307B, Combustor Liner Cooling - Experimental and Validation

ThC-17-3, Room 301, Combustor Heat Transfer

Heat Transfer: Internal Air Systems & Seals with Turbomachinery CommitteeTC-15-2, Room 307A, Rotor-Rotor and Rotor-Stator Disc Cavities

WB-15-1, Room 307B, Hot Gas Ingestion and Rim Seals I

WC-15-3, Room 307A, Pre-Swirl Systems

ThA-15-5, Room 307B, Brush and Miscellaneous Seals

ThB--15-6, Room 307A, Leaf and Miscellaneous Seals

FA-15-7, Room 307A, Miscellaneous Topics in Internal Air Systems Modeling

FB-15-8, Room 301, Hot Gas Ingestion and Rim Seals II

FC-15-4, Room 307A, Labyrinth Seals

Heat Transfer: Structures with Structures & DynamicsMA-18-1, Room 307B, Thermal-Structural Interaction - Fatigue and Life Prediction

FB-18-2, Room 307A, Thermal-Structural Interaction - Experimental Validation

Industrial & Cogeneration with Combustion, Fuels & EmissionsThA-20-7, Room 401, Combustion & Emissions

Manufacturing Materials & Metallurgy with CeramicsMA-21-3, Room E5, Design, Manufacturing and Material Processing for Advanced Turbine Components

TA-21-2, Room 318A, Development and Performance of TBC and Advanced Coating Systems

Manufacturing Materials & Metallurgy with Structures & Dynamics: Fatigue, Fracture & Life PredictionWC-21-10, Room 402, Additive Manufacturing and Certification of Additive Manufacturing Parts

Microturbines, Turbochargers & Small Turbomachines with TurbomachineryMB-23-9, Room 327, Turbochargers - Compressors & Turbines

FA-23-4, Room 308C, Microturbine and Small Compressor Performance

Steam Turbines with Structures & Dynamics: Fatigue, Fracture & Life PredictionFB-26-10, Room E2, HP/IP Turbines Blades and Rotor

Steam Turbines with Structures & Dynamics: Structural Mechanics, Vibration & DampingTB-26-3, Room E2, LSB Vibrational Aspects I

Steam Turbines with Structures & Dynamics: Aerodynamic Excitation & DampingTA-26-11, Room E2, LSB Vibrational Aspects II

WB-26-1, Room E2, HP/IP Turbines Aerodynamics & Aeromechanical

Structures & Dynamics: Aerodynamic Excitation & Damping with TurbomachineryThA-34-2, Room 307C, Turbomachine Aeroelasticity and Computational Methods 2

ThB--34-3, Room 307C, Turbomachine Aeroelasticity and Computational Methods 3

ThC-34-1, Room 307C, Turbomachine Aeroelasticity and Computational Methods 1

FA-34-5, Room 307C, Turbomachine Aerodynamic Interaction and Forced Response 1

FB-34-4, Room 307C, Turbomachine Aeroelasticity and Computational Methods 4

FC-34-6, Room 307C, Turbomachine Aerodynamic Interaction and Forced Response 2

Wind Energy with Turbomachinery and Aircraft EnginesTA-46-12, Room 402, Environmental Issues in Turbo Machinery is joint with Turbomachinery and Aircraft Engines

Gyeongbokgung Palace

FINAL PROGRAM | 41

Tutorials of Basics & User Sessions

Tutorials of BasicsAircraft EngineTB-1-2, Room E6, Transient Engine Simulation - Its Role in Design and Development

ThB-1-4, Room E6, Introduction to Aero Engine Conceptual Design and Technological Perspectives

CeramicsThC-2-3, Room 308B, Ceramic Matrix Composites for Hot Section Parts Combustion, Fuels & EmissionsMB-4-32, Room E6, Combustion Fundamentals

Cycle InnovationsTB-6-11, Room E5, Introduction to Thermodynamics for Gas Turbine Cycles and Cycle Simulation

ThB-6-10, Room 317A, Introduction to Dynamic Analysis and Modelling of Plant Systems

Heat Transfer: TutorialsMA-14-3, Room 301, Heat Transfer Tutorials III

MB-14-2, Room E5, Heat Transfer Tutorials II

TB-14-1, Room 301, Heat Transfer Tutorials I

Industrial & CogenerationThA-20-7, Room 401, Combustion & Emissions

Manufacturing Materials & MetallurgyTB-21-8, Room 402, Metallurgy for Non-Metallurgists

Microturbines, Turbochargers & Small TurbomachinesMA-23-10, Room 317B, Oil-Free Bearings for High Speed Small Turbomachinery

Oil & Gas ApplicationsTA-24-16, Room 401, High Pressure Compression for Injection, EOR and CO2 storage

TB-24-14, Room 401, Aeroderivatives & Light Industrial Gas Turbine Engines: Upgrades & Updates

WA-24-7, Room 401, System Integration and Operation

WA-24-13, Room E5, Compression System Dynamics

WB-24-4, Room 402, Gas Turbine Fouling and Erosion

WC-24-17, Room E6, Oil & Gas Applications

ThA-24-5, Room E5, Multiphase Expanders and LNG Systems

ThB-24-18, Room E5, Fundamentals of Wet Gas Compression

ThC-24-2, Room 317A, Compressor Stations

FA-24-20, Room 317A, Transient Performance of Turbo-Generators

Steam TurbinesTC-26-13, Room E2, Mechanical Integrity of Steam Turbines

Supercritical CO2 Power CyclesMA-36-11, Room 401, Introduction to sCO2 Power Cycles

ThB-36-8, Room 317B, Heat Exchangers for Supercritical CO2 Power Cycles

Wind EnergyMA-46-9, Room E6, Wind Turbine Blade Design

TA-46-12, Room 402, Environmental Issues in Turbomachinery

MB-46-8, Grand Ballroom, Introduction to Wind Energy

User SessionsManufacturing Materials & MetallurgyThB-21-7, Room 401, Life Extension of Gas Turbine Components

Oil & Gas ApplicationsMA-24-11, Room 402, Basics of Turbomachinery Modelling and Simulation: Lumped Parameter Dynamic Models and CFD Models

MB-24-12, Room 317A, Compressor Fouling Mechanisms and Modeling

WA-24-13, Room E5, Compression System Dynamics

WC-24-9, Room 317A, Turbomachinery Instrumentation Components, Practices, and Uncertainty

WC-24-17, Room E6, Oil & Gas Applications

FB-24-15, Room E6, Basics of Rotordynamics Instrumentation & Data Acquisition

Steam TurbinesThA-26-4, Room E2, LSB Design & Wetness

MB-26-8, Room E2, Steam Turbine Design and Operational Aspects

WC-26-14, Room 403, Steam Turbine Panel

FA-26-2, Room E6, HP/IP Turbines Blade Design and Operation

Structures & Dynamics: Aerodynamic Excitation & DampingFA-34-5, Room 307C, Turbomachine Aerodynamic Interaction and Forced Response

Turbomachinery: Axial Flow Turbine AerodynamicsWB-38-6, Room 327, Low pressure Turbine Aerodynamics I

Bongeunsa Temple

42 | ASME 2016 TURBO EXPO

Facility Tours Session Schedule

Please note that space is limited for all tours. All tours are conducted at the discretion of the host company and under the conditions the company establishes, including restrictions and pre-screening of participants. All tours are subject to cancellation.

Korea Midland Power Company (KOMIPO) Thursday, June 16, 2016 | 7:00 a.m. – 3:30 p.m.

KOMIPO own and operate various power plants from steam power plant and internal combustion and combined cycle thermal power generation plant to renewable energy facilities. The tour will consist of a visit of the energy world (promotion hall), the observatory of No 3 Power Plant and control room in Boryeong thermal plant division and Shin Boryeong thermal plant construction site division.

Schedule:7:00 – 9:30 a.m. Travel from the COEX to the KOMIPO Power Plant9:30 – 11:40 a.m. Tour of the facility11:40 a.m. – 1:00 p.m. Complimentary lunch1:00 – 3:30 p.m. Travel back to the COEX

Location: Boryeong-si, Chungcheongnam-do, South KoreaTransportation: Bus transportation will be providedRegistration: Space is limited to 40 participants.

Korean Air Friday, June 17, 2016 | 1:00 p.m. – 5:00 p.m.

Bucheon Powerplant Maintenance CenterKorean Air has acquired both local and foreign certificates from FAA, EASA, CAAC, TDCA and ANAC which give an authorization to overhaul and repair foreign airlines’ engines as well as Korean Air’s. Powerplant Maintenance Center consists of four plants which include Engine & Module Maintenance Plant, Part Inspection & Repair Plant, Part Inspection & Metal Process Repair Plant and Engine Test Cell. Korean Air has carried out more than 4,000 engine overhaul and re-pair since 1972 with 350 dedicated and highly skilled engine specialists. Currently it has full overhaul capabilities for PW4056/62, PW4168/70, PW4090, CFM56-7B engine and hot section overhaul capability for GE90 engine model.

Incheon Engine Test Cell (Incheon Aviation Tech Co., Ltd.)In 2010, Korean Air and Pratt & Whitney has established JV Company, Incheon Aviation Tech Co., Ltd. and built a new engine test cell in IFEZ (Incheon Free Economic Zone) in 2015. It is one of the world’s largest engine test cells with 14 x 14 meters of test cell chamber size, capable of engine acceptance test of large commercial engines above 150,000 lbs. of thrust rating. Starting from 2016, GE90 and PW4090 engines are being tested in this new facility and the addition of PW4170 & PW4168 engines is planned in 2Q 2016. This facility will take a pivotal role for Korean Air to extend its engine MRO capabilities down the road to provide engine MRO and test services for both Korean Air and foreign customers.

Schedule:1:00 – 2:00 p.m. Travel to Bucheon Powerplant from the COEX2:00 – 3:00 p.m. Tour the Bucheon Powerplant3:00 – 4:00 p.m. Leave Bucheon and tour Incheon Engine Test Cell4:00 – 5:00 p.m. Travel back to the COEX

Location: Bucheon-si Gyeonggi-do and Incheon, South KoreaTransportation: Bus transportation will be provided Registration: Space is limited to 25 participants.

Registration for the facility tours was done online in advance of the event.

Don't Miss these Incredible Displays in the Exhibit Hall!

Facility Tours Session Schedule

• Consult pages 48-152 for the detailed Technical Conference session schedule. • All turbine user-oriented sessions are listed on page 45. • All Tutorials of Basics sessions are listed on page 45. • All sessions are conducted in English.

Session ID Key The Session ID is comprised of the day code and the original session number from the conference web tool.

MA - Monday, June 13 8:00 - 10:00 AM

MB - Monday, June 13 2:30 - 5:30 PM

TA - Tuesday, June 14 9:00 - 10:30 AM

TB - Tuesday, June 14 10:45 AM - 12:45 PM

TC - Tuesday, June 14 2:30 - 5:30 PM

WA - Wednesday, June 15 9:00 - 10:30 AM

WB - Wednesday, June 15 10:45 AM - 12:45 PM

WC - Wednesday, June 15 2:30 - 5:30 PM

ThA - Thursday, June 16 8:00 - 10:00 AM

ThB - Thursday, June 16 10:15 AM - 12:15 PM

ThC - Thursday, June 16 2:30 - 5:30 PM

FA - Friday, June 17 8:00 - 10:00 AM

FB - Friday, June 17 10:15 AM - 12:45 PM

FC - Friday, June 17 2:30 - 5:30 PM

Don't Miss these Incredible Displays in the Exhibit Hall!

FINAL PROGRAM | 43

44 | ASME 2016 TURBO EXPO

Session Schedule Guide

COMMITTEE/TRACK NAME

Session Title

Session Type • Room • Session ID

Session Chair, Affiliation Session Co-Chair(s), Affiliation(s)

PRES

ENT

AT

ION

TIM

E

Paper Title ASME Paper Number Author(s), Affiliation(s)

COMBUSTION, FUELS & EMISSIONS

Novel Combustion Concepts I

Paper Session • Room 317C • MA-4-5

Session Chair: Bernd Prade, Siemens AG KWUSession Co-Chair: Adnan Eroglu, GE

8:00

Short Helical Combustor: Dynamic Flow Analysis in a Combustion System With Angular Air Supply GT2016-56046 Behdad Ariatabar, Karlsruhe Institute of

Technology, Karlsruhe, BW, Germany, Rainer Koch, Karlsruhe Institut of Technology (KIT), Karlsruhe, Germany, Hans-Jorg Bauer, KIT - Institute for Thermal Turbomachinery (ITS), Karlsruhe, BW, Germany

8:30

Numerical Studies of Multi-Cycle Deto-nation Induced by Shock Focusing GT2016-56713 Zhihong Zhang, Zhiqiang Li, Yunke Wu,

BeiHang University, Beijing, Beijing, China, Xingdong Bao, The Second Academy of China Aerospace Science and Industry Corporation, Beijing, Beijing, China

9:00

Experimental and Numerical Investiga-tions of a Mild Combustor Applied for Gas Turbine GT2016-56289 Yan Xiong, ZiChen Zhou, MingMing Huang,

Zhedian Zhang, Yunhan Xiao, Institute of En-gineering Thermophysics, Chinese Academy of Sciences, Beijing, China

9:30

Numerical and Experimental Results From a Common-Source High-G Ul-tra-Compact Combustor GT2016-56215 Andrew E. Cottle, Marc Polanka, Air Force

Institute of Technology, WPAFB, OH, United States

Sessions are detailed vertically. The top rows contain general information, and the bottom rows list the organizer and paper details. Presentation times are noted to the left.

Column Detail Example

FINAL PROGRAM | 45

MONDAY, JUNE 13 8:00 - 10:00 AM

COMBUSTION, FUELS & EMISSIONS

COMBUSTION, FUELS & EMISSIONS

CONTROLS, DIAGNOSTICS & INSTRUMENTATION

Novel Combustion Concepts I Combustion Dynamics: Tools Development Gas Turbine Fault Diagnostics

Paper Session • Room 317C • MA-4-5 Paper Session • Room E3 • MA-4-21 Paper Session • Room 308B • MA-5-3

Session Chair: Bernd Prade, Siemens AG KWUSession Co-Chair: Adnan Eroglu, GE

Session Chair: Jonas Moeck, TU BerlinSession Co-Chair: Alessandro Scarpato, GE Power

Session Chair: Syed Khalid, Gas Turbine Systems Solutions, LLCSession Co-Chair: Craig Davison, National Research Council CanadaSession Co-Organizer: Liang Tang, Pratt & Whitney

8:00

Short Helical Combustor: Dynamic Flow Analysis in a Combustion System With Angular Air Supply GT2016-56046 Behdad Ariatabar, Karlsruhe Institute of

Technology, Karlsruhe, BW, Germany, Rainer Koch, Karlsruhe Institut of Technology (KIT), Karlsruhe, Germany, Hans-Jorg Bauer, KIT - Institute for Thermal Turbomachinery (ITS), Karlsruhe, BW, Germany

Linearized Euler Equations for the Predic-tion of Linear High-Frequency Stability in Gas Turbine Combustors GT2016-57818 Moritz Schulze, Technische Universitaet

Muenchen, Garching bei Muenchen, Bavaria, Ger-many, Tobias Hummel, Technische Universitaet Muenchen, Garching, Germany, Noah Klarmann, Technische Universität München, Garching, Ger-many, Frederik M. Berger, Technical University of Munich, Garching, Germany, Bruno Schuer-mans, GE Power, Baden, Switzerland, Thomas Sattelmayer, Technical Univ Munich, Garching, Germany

Fault Detection Using Reduced Rank Lin-ear Engine Models GT2016-57916 Cody Allen, Solar Turbines Inc, San Diego, CA,

United States, Chad Holcomb, Solar Turbines Inc., San Diego, CA, United States, Mauricio de Oliveira, University of California San Diego, La Jolla, CA, United States

8:30

Numerical Studies of Multi-Cycle Deto-nation Induced by Shock Focusing GT2016-56713 Zhihong Zhang, Zhiqiang Li, Yunke Wu,

BeiHang University, Beijing, Beijing, China, Xingdong Bao, The Second Academy of China Aerospace Science and Industry Corporation, Beijing, Beijing, China

Influence of Nonlinear Flame Models on Thermoacoustic Instabilities in Combus-tion Chambers GT2016-57129 Giovanni Campa, Ansaldo Energia, Genova, Ita-

ly, Roberto Cademartori, Università di Genova, Genova, Italy

Model Based Diagnostics of AE-T100 Micro Gas Turbine GT2016-57671 mariam mahmood, Alessio Martini, Università

di Genova, Italy., Genova, Italy, Alberto Tra-verso, Univ Of Genova, Genova 16145, Italy, Enri-co Bianchi, Ansaldo Energia, Genova, Italy

9:00

Experimental and Numerical Investiga-tions of a Mild Combustor Applied for Gas Turbine GT2016-56289 Yan Xiong, ZiChen Zhou, MingMing Huang,

Zhedian Zhang, Yunhan Xiao, Institute of En-gineering Thermophysics, Chinese Academy of Sciences, Beijing, China

Uncertainty Quantification of Growth Rates of Thermoacoustic Instability by an Adjoint Helmholtz Solver GT2016-57659 Camilo F. Silva, Technische Universität Muenchen,

Garching bei München, Bayern, Germany, Luca Magri, Stanford University, California, CA, Unit-ed States, Thomas Runte, Technische Universität München, Munich, Germany, Wolfgang Polifke, Technische Universität München, Garching, Ger-many

An Approach to Sensor Failure Recovery Using a Neural Network Based Adaptive Observer GT2016-57811 Sinan Ekinci, Gonenc Gursoy, Aerotim Engi-

neering, Ankara, Turkey, Ilkay Yavrucuk, Oguz Uzol, Middle East Technical University, Ankara, Turkey

9:30

Numerical and Experimental Results From a Common-Source High-G Ul-tra-Compact Combustor GT2016-56215 Andrew E. Cottle, Marc Polanka, Air Force

Institute of Technology, WPAFB, OH, United States

An Acoustic Time-of-Flight Approach for Unsteady Temperature Measurements: Characterization of Entropy Waves in a Model Gas Turbine Combustor GT2016-56571 Dominik Wassmer, TU Berlin, Berlin, Berlin,

Germany, Bruno Schuermans, GE Power, Baden, Switzerland, Christian Oliver Paschereit, Chair of Fluid Dynamics, Hermann-Föttinger-Institut, TU Berlin, Berlin, Germany, Jonas Moeck, TU Ber-lin, Berlin, Berlin, Germany

Model-Based Fault Diagnosis for Perfor-mance Degradations of Turbofan Gas Path via Optimal Robust Residuals GT2016-56300 Chao Yang, Xiangxing Kong, AVIC Academy of

Aeronautic Propulsion Technology, Beijing, Bei-jing, China, Xi Wang, Beihang University, Beijing, Beijing, China

46 | ASME 2016 TURBO EXPO

MONDAY, JUNE 13 8:00 - 10:00 AM

FANS & BLOWERS HEAT TRANSFER: NUMERICAL INTERNAL COOLING HEAT TRANSFER: TUTORIALS

Experimental Methods and Studies

Numerical Internal Cooling: Effects of Coolant Swirl and

Channel RotationHeat Transfer Tutorials III

Paper Session • Room 308C • MA-9-2 Paper Session • Room 307A • MA-11-1 Tutorial Session • Room 301 • MA-14-3

Session Chair: Janos Vad, Budapest Univ Tech & EconomicsSession Co-Chair: Giovanni Delibra, ‘Sapienza’ University of Rome

Session Organizer: Li He, University of OxfordSession Co-Organizer: Mounir Ibrahim, Cleveland State University

Session Organizer: Andrew Nix, West Vir-ginia University

8:00

Experimental Investigation on Double Anti-Stall Ring Effects on Reversible Ventilation Fan Performance GT2016-57474 David Volponi, Sapienza University of Rome,

Rome, Italy, Alessandro Corsini, Sapienza University of Rome, Roma, Italy, Anthony G. Sheard, AGS Consulting, LLC, Atlanta, GA, United States, Giovanni Delibra, ‘Sapienza’ University of Rome, Rome, Italy

Conjugate Heat Transfer Analysis of a Blade Leading Edge Cooling Configuration Using Double Swirl Chambers GT2016-56937 Karsten Kusterer, B&B-AGEMA, Aachen, Ger-

many, Peter Bühler, Gang Lin, Takao Sugimoto, B&B-AGEMA GmbH, Aachen, Germany, Dieter Bohn, RWTH Aachen, Aachen, Germany, Masa-hide Kazari, Ryozo Tanaka, Kawasaki Heavy In-dustries, Ltd., Akashi, Japan

Heat Transfer with Combustors GT2016-56033 Marc Polanka, Air Force Institute of Technology, WPAFB, OH, United States

8:30

Fouling Detection in Low Speed Fan Us-ing Near-Field Diy Sound Pressure Sen-sors GT2016-57557 Cecilia Tortora, Alessandro Corsini, Sapienza

University of Rome, Roma, Italy

LES-Based Assessment of Rotation-Sensi-tized Turbulence Models for Prediction of Heat Transfer in Internal Cooling Channels of Turbine Blades GT2016-57293 Domenico Borello, Università di Roma Sapienza,

Rome, Italy, A. Salvagni, Sapienza Università di roma, Rome, Roma, Italy, Franco Rispoli, Sapi-enza University of Rome, Rome, Italy, Ermanno Properzi, Sapienza Università di Roma, Roma, RM, Italy

Heat Transfer: Experimental Film Cooling GT2016-56034 Srinath Ekkad, Virginia Tech. University, Blacks- burg, VA, United States

9:00

“Study on the Effect of Inlet Geometry on the Noise of an Axial Fan, With In-volvement of the Phased Array Micro-phone Technique” GT2016-57772 Tamas Benedek, Budapest University Techn

Econ, Budapest, Hungary, Janos Vad, Buda-pest Univ Tech & Economics, Budapest H1111, Hungary

Numerical Study on Effects of Jet Nozzle Angle and Number on Vortex Cooling Be-havior for Gas Turbine Blade Leading Edge GT2016-57390 Changhe Du, Liang Li, Xiuxiu Chen, Xiaojun Fan,

Xi’an Jiaotong University, Xi’an, Shaanxi Prov-ince, China, Zhenping Feng, Xi’an Jiaotong Uni-versity, Shaanxi, Shaanxi, China

Introduction to Experimental Internal Cooling GT2016-56048 Lamyaa El-Gabry, The American University of Cairo, New Cairo, Egypt

9:30

Study on the Reverse Rotating Charac-ter Driven by the Backflow on a Centrif-ugal Fan System GT2016-57232 Xiaoyun QU, Tong Wang, Shanghai Jiaotong

University, Shanghai, China, Jongho An, Kim Chaek Polytechnical University, Pyongyang, Democratic People’s Republic of Korea

Experimental and Numerical Study of Heat Transfer Performance for an Engine Repre-sentative Two-Pass Rotating Internal Cool-ing Channel GT2016-57419 Zhi Wang, E.T.S.I.Aeronautica y del Espacio, UPM,

Madrid, Spain, Roque Corral, ITP, Alcobendas (Madrid), Spain, Francois Chedevergne, ONERA, Chatillon Cedex, France

Internal Air Systems & Seals GT2016-58109 Bijay K. Sultanian, Takaniki Communications, LLC, OVIEDO, FL, United States

FINAL PROGRAM | 47

MONDAY, JUNE 13 8:00 - 10:00 AM

HEAT TRANSFER: STRUCTURES (WITH

STRUCTURES & DYNAMICS)

MANUFACTURING MATERIALS & METALLURGY

MICROTURBINES, TURBOCHARGERS & SMALL

TURBOMACHINES

Thermal-Structural Interaction - Fatigue and Life Prediction

(Joint Session with S&D)

Design, Manufacturing and Material Processing for Advanced

Turbine Components

Oil-Free Bearings for High Speed Small Turbomachinery

Paper Session • Room 307B • MA-18-1 Paper Session • Room E5 • MA-21-3 Tutorial Session • Room 317B • MA-23-10

Session Chair: Scott Yandt, National Research Council CanadaSession Co-Organizer: Gulcharan Brainch, GE

Session Chair: Bernd Prade, École Polytechnique de MontréalSession Co-Chair: Dr. Serge Selezneff, SNECMA, Elsa Piollet, École Polytechnique de Montréal, Piero-Daniele Grasso, General Electric (Switzer-land) GmbH

Session Chair: Keun Ryu, Hanyang Univer-sity

8:00

Turbine Blade Life Prediction Using Fluid-Thermal-Structural Interaction Simulation GT2016-57048 Iroizan Ubulom, UNSW-Canberra, Canberra,

Canberra, Australia, Alan Fien, A.J. Neely, University of new South Wales, canberra, Aus-tralia, Krishnakumar Shankar, UNSW-Can-berra, Nottcott Drive, Not Applicable, Austra-lia

A Reliable Transition Duct With Separa-tion Planes for the Annular Combustor of GT13E2 Gas Turbine GT2016-57627 Remigi Tschuor, General Electric (Switzerland)

GmbH, Baden, CH, Switzerland, Bogdan Trbo-jevic, Alen Markovic, General Electric (Croatia) Ltd., Karlovac, Croatia (Hrvatska)

Overview of Gas Bearings GT2016-58306 Luis San Andres, Texas A & M Univ, College Sta-

tion, TX, United States, Keun Ryu, Hanyang Uni-versity, Ansan, Gyeonggi-do, Korea (Republic)

8:30

Development of Temperature Estima-tion Method for a Gas Turbine Transi-tion Piece GT2016-56182 Mitsutoshi Okada, Toshihiko Takahashi,

CRIEPI, Yokosuka, Japan, Susumu Yamada, CRIEPI, Yokosouka, Japan, Takayuki Ozeki, Tomoharu Fujii, CRIEPI, Yokosuka, Japan

High Temperature Deformation of Inconel 718Plus™ GT2016-57015 Utkudeniz Ozturk, Polytechnic University of Cat-

alonia, Barcelona, Catalonia, Spain, Jose Maria Cabrera, Polytechnic University of Catalonia, Fundacio CTM Centre Tecnologic, Barcelona, Manresa, Spain, Jessica Calvo, UPC, Barcelona, Spain

Bump type foil bearings: Structural char-acteristics and rotordynamic force coeffi-cients GT2016-58307 Mihai Arghir, Universite De Poitiers - Instit

Pprime, D3, Futuroscope Chasseneuil 86962, France

9:00

Thermal Mechanical Fatigue and Creep Interaction in Turbine Housing Divider Wall Design GT2016-56409 Wei Guo, Henry Guo, honeywell, Shanghai,

China

Material Selection Issues for A Nozzle Guide Vane against Service Induced failure GT2016-56120 Xijia Wu, Zhong Zhang, National Research Coun-

cil Canada, Ottawa, ON, Canada, Leiyong Jiang, National Research Council, Ottawa, ON, Canada, Prakash Patnaik, Institute for Aerospace Re-search, National Researc, Ottawa, ON, Canada

Overview of hybrid (hydrostatic & con-trollable) gas bearings & Active magnetic bearings GT2016-58308 Ilmar Ferreira Santos, Technical University of

Denmark, Kgs. Lyngby, Denmark

9:30

The Effect of Thermochemical Non-Equi-librium on the Aerodynamics of Osculat-ing-Cone Waverider GT2016-56929 ZHEN LIU, LIU JUN, DING FENG, XIA

ZHIXun, National University of Defense Tech-nology, Changsha, China

Towards High Productive Roughing of Pro-filed Grooves in Nickel Based Alloys GT2016-56475 Fritz Klocke, WZL of RWTH Aachen University,

Aachen, Germany, Benjamin Döbbeler, Laborato-ry for Machine Tools and Production Engineering of RWTH Aachen University, Aachen, Germany, Martin Seimann, Marvin Binder, WZL of RWTH Aachen University, Aachen, Germany

Implementation of foil bearings in a micro gas turbine system & Integration of active magnetic bearings into commercial sys-tems GT2016-58309 Daniel Lubell, Oil-Free Machinery, Yorba Linda,

CA, United States

48 | ASME 2016 TURBO EXPO

MONDAY, JUNE 13 8:00 - 10:00 AM

OIL & GAS APPLICATIONS OIL & GAS APPLICATIONS STEAM TURBINES

Wet Gas Compression and Pumps

Basics of Turbomachinery Modelling and Simulation:

Lumped Parameter Dynamic Models and CFD models

Steam Turbine Valves

Paper Session • Room 317A • MA-24-8 Tutorial Session • Room 402 • MA-24-11 Paper Session • Room E2 • MA-26-7

Session Chair: Melissa Poerner, South-west Research InstituteSession Co-Chair: William Maier, Dress-er-Rand

Session Chair: Mirko Morini, University of ParmaSession Co-Chair: Michele Pinelli, University of Ferrara

Session Chair: Cosimo Bianchini, Ergon Re-search

8:00

Industry Perspectives and Experience with Wet Gas Compression GT2016-56159 Grant Musgrove, Griffin Beck, Melissa Po-

erner, Southwest Research Institute, San An-tonio, TX, United States, Rainer Kurz, Solar Turbines Incorporated, San Diego, CA, United States, Gary Bourn, Anadarko, Denver, CO, United States

System Simulation by Means of Lumped Pa-rameter Dynamic Models GT2016-58310 Mirko Morini, University of Parma, Parma, Italy

Rapid Close of a Butterfly Valve Placed in a Curved Channel: A Computational Study of Unsteady Steam Flow and Aerodynamic Torque GT2016-56065 Peng WANG, School of Mechanical Engineer-

ing, Shanghai Jiao Tong University, Shanghai, Shanghai, China, Yingzheng Liu, Shanghai Jiao Tong University, Shanghai, China, Zhiqiang Hu, “Shanghai Electric Power Generation Equipment Co.,Ltd.”, shanghai, shanghai, China, SIHUA XU, Shanghai Electric Power Generation Equipment Co.,Ltd., Shanghai, China

8:30

Variable Inlet Guide Vane Effect on Cen-trifugal Compressor Performance in Wet Gas Flow GT2016-57376 Levi André Berg Vigdal, NTNU, Trondheim,

Norway, Lars Eirik Bakken, Norwegian Univ Of Sci & Tech, Trondheim, Norway

Part II: System Simulation by Means of Lumped Parameter Dynamic ModelsGT2016-58310Mirko Morini, University of Parma, Parma, Italy

Investigation on Flow Induced Vibrations of a Steam Turbine Inlet Valve Considering Fluid Structure Interaction Effects GT2016-56314 Clemens Bernhard Domnick, University of Duis-

burg Essen, Duisburg,, Germany, Friedrich-Karl Benra, Univ of Duisburg-essen, Duisburg 47048, Germany, Dieter Brillert, Univ. of Duisburg-Es-sen, Duisburg, Germany, Christian Musch, Sie-mens AG, Mulheim an der Ruhr, Germany, Hans Josef Dohmen, University of Duisburg-Essen, Duisburg, Germany

9:00

WET GAS COMPRESSION: PERFOR-MANCE TEST OF A 3D IMPELLER AND VALIDATION OF PREDICTIVE MODEL GT2016-57976 Veronica Ferrara, Norwegian University of

Science and Technology, Trondheim, Norway, Lars Eirik Bakken, Norwegian Univ Of Sci & Tech, Trondheim, Norway, Stefano Falomi, GE Oil & Gas, Florence, Italy, Alberto Scotti Del Greco, GE, Florence, Italy, Italy, Matteo Ber-toneri, GE Oil & Gas, Firenze, Italy, Giuseppe Sassanelli, GE Oil & Gas, Florence, Italy

Component Characterization by Means of CFD Simulations GT2016-58311 Michele Pinelli, University of Ferrara, Ferrara,

Italy

Experimental and Numerical Investiga-tion of Quick Closing Buffer Performance of Steam Turbine Admission Valve GT2016-56529 Lei Xiao, Shanghai Electric Power Generation Equip-

ment Co., Ltd. Shanghai Turbine Plant, Shanghai, China, SIHUA XU, Shanghai Electric Power Gener-ation Equipment Co.,Ltd., Shanghai, China, jin he, ShangHai Electric Group, ShangHai, ShangHai, Chi-na, Zhiqiang Hu, “Shanghai Electric Power Genera-tion Equipment Co.,Ltd.”, shanghai, shanghai, China, Xiaogang Zhou, Intesim, Dalian, Dalian, China

9:30

A Transient 3D CFD Model of a Progres-sive Cavity Pump GT2016-56599 k.r. Mrinal, M. H. Siddique, Abdus Samad, iit

madras, chennai, IndiaExperimental Study of the Influence of the Operating Parameters on the Perfor-mance and Capability of a Mixed-Flow Multiphase Pump GT2016-56576 Alberto Serena, Norwegian University of

Science and Technology, Trondheim, OO, Nor-way, Lars Eirik Bakken, Norwegian Univ Of Sci & Tech, Trondheim, Norway

Part II: Component Characterization by Means of CFD SimulationsGT2016-58311Michele Pinelli, University of Ferrara, Ferrara,Italy

Experimental Investigation of the Flow in a Control Valve of an Industrial Steam Turbine GT2016-57215 Jan-Peter Zess, HSU Hamburg, Hamburg, Ger-

many, Thomas Polklas, MAN Diesel & Turbo SE, Oberhausen, Germany, Franz Joos, Helmut-Schmidt University, Hamburg D, Germany

FINAL PROGRAM | 49

MONDAY, JUNE 13 8:00 - 10:00 AM

STRUCTURES & DYNAMICS: EMERGING METHODS IN DESIGN & ENGINEERING

STRUCTURES & DYNAMICS: STRUCTURAL MECHANICS,

VIBRATION & DAMPING

SUPERCRITICAL CO2 POWER CYCLES

Optimization & New Methods Development

Mistuning of Blisks and Bladed Disks II

Introduction to sCO2 PowerCycles

Paper Session • Room 300 • MA-27-1 Paper Session • Room 307C • MA-32-2 Tutorial Session • Room 401 • MA-36-11

Session Chair: Martin Hughes, Siemens Industrial Turbomachinery Ltd.Session Co-Chair: Weizhe Wang, Shang-hai Jiao Tong University

Session Chair: Luigi Carassale, University of GenovaSession Co-Chair: Georges Jacquet, Insa Lab De Mecanique De Struc

Session Chair: Grant Musgrove, Southwest Research Institute

8:00

Influence of Different Parametrizations on the Optimum Design of a High Pres-sure Turbine Blade Firtree GT2016-56749 Frank Wagner, Brandenburgische Technische

Universität Cottbus-Senftenberg, Cottbus, Germany, Arnold Kuehhorn, Brandenburg University of Technology Cottbus-Senften-berg, Cottbus, Germany, Thomas Weiss, Rolls Royce Deutschland Ltd & Co. KG, Blak-enfeld-Mahlow, Germany, Dierk Otto, Rolls-Royce Deutschland, Dahlewitz, Equatorial Guinea

Effects of Contact Mistuning on Shrouded Blisk Dynamics GT2016-57812 Mainak Mitra, University of Michigan, Ann Ar-

bor, Ann Arbor, MI, United States, Stefano Zuc-ca, Politecnico Di Torino - DIMEAS, Torino, Italy, Bogdan Epureanu, University of Michigan, Ann Arbor, MI, United States

T

U

T

O

R

I

A

L

8:30

Win Shaft Gas Turbine Variable Area Turbine Nozzle: Analytical Modeling and Optimization of Kinematic Chain GT2016-57702 Simone Colantoni, GE Oil & Gas, Florence,

Italy, Girolamo Tripoli, GE Oil & Gas, Firen-ze, Italy, Devidasa Pai Gorte, GE Oil & Gas, Bangalore, India, Francesco Franchini, Fabio Rossetti, Marco Spagnolo, EnginSoft S.p.A, TRENTO, Italy

Vibration Absorbers for a Mistuned Bladed Disk GT2016-56076 Alok Sinha, Pennsylvania State Univ, University

Park, PA, United States

9:00

Towards a Flexible Immersed Boundary Method for Fluid/Structure Interac-tions in Turbomachinery Applications GT2016-56801 Gianluca Iaccarino, Stanford University,

Stanford, CA, United States, Sangjin Lee, Doo-san Heavy Industries & Construction Co., Ltd., Soul, Korea (Republic), Jungchan Kim, Young Ho Ju, Doosan Heavy Industries & Construc-tion Co., Ltd., Seoul, Korea (Republic)

Reduced Order Models of Blisks With Small Geometric Mistuning GT2016-57829 Seunghun Baek, Yixin Zhao, Bogdan Epureanu,

University of Michigan, Ann Arbor, MI, United States

9:30

Numerical Simulation of Ice Shedding From a Spinning Cone by Using Coupled CZM and XFEM GT2016-56854 Liang Fu, Yong Chen, Man Xu, Shanghai Jiao

Tong University, Shanghai, China, Xianhua Wu, Shanghai Jiaotong University, Shanghai, Shanghai, China, Wei Dong, Shanghai Jiao Tong University, Shanghai, China

Reduced Order Models for Blisks With Small and Large Mistuning and Friction Dampers GT2016-57850 Weihan Tang, Seunghun Baek, Bogdan Epurea-

nu, University of Michigan, Ann Arbor, MI, United States

50 | ASME 2016 TURBO EXPO

MONDAY, JUNE 13 8:00 - 10:00 AM

TURBOMACHINERY: AXIAL FLOW FAN & COMPRESSOR

AERODYNAMICS

TURBOMACHINERY: AXIAL FLOW TURBINE

AERODYNAMICS

TURBOMACHINERY: DESIGN METHODS & CFD MODELING

FOR TURBOMACHINERY

Casing Treatment Tip leakage flows II Cavities, Seals, Bearings

Paper Session • Room 403 • MA-37-5 Paper Session • Room 327 • MA-38-4 Paper Session • Room E1 • MA-39-11

Session Chair: Michael Hathaway, NASA Glenn Research CenterSession Co-Chair: Christoph Brandstet-ter, Technische Universitat

Session Chair: Alexander Wiedermann, MAN Diesel & Turbo SESession Co-Chair: Milan Petrovic, Universi-ty of Belgrade

Session Chair: Chong M. Cha, Rolls-Royce Corporation

8:00

Difference in the Working Principle of Axial Slot and Tip Blowing Casing Treat-ments GT2016-56966 André Inzenhofer, Technische Universität München,

Garching b. München, Bavaria, Germany, Andreas Hupfer, Technische Universität München, München, Germany, Bernd Becker, Patrick Grothe, Rolls-Royce Deutschland Ltd & Co KG, Blankenfelde-Mahlow, Germany, Frank Heinichen, Rolls-Royce-Ger-many,Blankenfelde-Mahlow, Germany, Cyril Guinet, Technische Universität München, Garching b. München, Bavaria, Germany

Control of Tip Leakage in a High Pressure Turbine Cascade Using Tip Blowing GT2016-56511 Ralph Volino, United States Naval Academy, An-

napolis, MD, United States

Differential Equation-Based Specification of Turbulence Integral Length Scales for Cavity Flows GT2016-56451 Richard Jefferson-Loveday, The University of

Nottingham, Nottingham, United Kingdom

8:30

Numerical Study on Effects of Axial-Slot Casing Treatment on Peak Efficiency of Axial Compressors GT2016-56554 Ning Ma, Institute of Engineering Thermo-

physics, Chinese Academy of Sciences, Beijing, Beijing, China, Xi Nan, Institute of Engineer-ing Thermophysics,, Beijing, China, Feng Lin, Institute of Engineering Thermophysics, Bei-jing, China

Numerical Study of the Effect of Honey-comb Tip on Tip Leakage Flow in Turbine Cascade GT2016-56907 Yunfeng Fu, Fu Chen, Cong Chen, Yanping Song,

Harbin Institute of Technology, Harbin, China

Evaluation of a Volume of Fluid CFD Meth-odology for the Oil Film Thickness Estima-tion in an Aero-Engine Bearing Chamber GT2016-56237 Andrea Bristot, Herve Morvan, Kathy Simmons,

University of Nottingham, Nottingham, United Kingdom

9:00

“The Effects on Stability, Performance, and Tip Leakage Flow of Recirculating Casing Treatment in a Subsonic Axial Flow Compressor” GT2016-56756 Wei Wang, Northwestern polytechnical uni-

versity, Xi'an, Shannxi, China, WuLi Chu, Northwestern Polytechnical University, Xi’an, Shanxi, China, HaoGuang zhang, Northwest-ern Ploytechnical University, Xi’an, Shanxi, China, Yanhui Wu, Northwestern Polytechni-cal University, Xian, China

A Parametric and Computational Aerother-mal Investigation of Squealer Tip Geome-try in an Axial Turbine: A Parametric Ap-proach Suitable for Future Advanced Tip Carving Optimizations GT2016-58107 Levent Kavurmacioglu, HIDIR MARAL, Cem B

Senel, Istanbul Technical University, Istanbul, Turkey

Numerical Analysis and Design Optimiza-tion of a Low Pressure Cylinder Control Valve Block of a High-Power Steam Tur-bine GT2016-56296 Liubov Arkhipova, Alexey Tyukhtyaev, Anton

Bogachev, OJSC Power Machines, Saint Peters-burg, Russia

9:30

Experimental and numerical investiga-tion of effect of center offset degree on compressor stability with circumferen-tial grooved casing treatment GT2016-56757 HaoGuang zhang, Northwestern Ploytechnical

University, Xi'an, Shanxi, China, Feng Tan, North-western Polytechnical University, Xi’an, Shaanxi, China, Yanhui Wu, Northwestern Polytechnical University, Xian, China, WuLi Chu, Northwestern Polytechnical University, Xi’an, Shanxi, China, Wei Wang, Northwestern polytechnical university, Xi'an, Shannxi, China, Kang An, Northwestern Polytechni-cal University, Xi’an, Shaanxi, China

Experimental and Numerical Investiga-tions on the Aerodynamic Performance of the Three-Stage Turbine With Consider-ation of the Leakage Flow Effect GT2016-56407 Yang Chen, Xi’an Jiaotong University, Xi’an,Shan-

nxi, China, Jun Li, Institute of Turbomachinery, Xi’an Jiaotong Univ., Xi’an, Shaanxi, China, Ch-aoyang Tian, Dongfang Steam Turbine Co.,Ltd., Deyang, Deyang,Sichuan, China, Gangyun Zhong, Xiaoping Fan, Xianglin Kong, Dongfang steam Turbine Co.,Ltd, Deyang,Sicuan, Sicuan, China

Numerical Simulation of the Flow in the Row Labyrinth Seal of an Axial Turbine Using a Low-Mach Preconditioning Tech-nique GT2016-56659 Jens Fiedler, Anton Weber, German Aerospace

Center (DLR), Cologne, Germany, Arianna Bosco, Karl Engel, MTU Aero Engines AG, Munich, Ger-many, Francesca di Mare, DLR, Köln, Germany

FINAL PROGRAM | 51

MONDAY, JUNE 13 8:00 - 10:00 AMTURBOMACHINERY: NOISE &

INNOVATIVE NOISE REDUCTION (WITH AIRCRAFT

ENGINE)

WIND ENERGY

Turbine and Combustor Noise Wind Turbine Blade Design

Paper Session • Room E4 • MA-41-1 Tutorial Session • Room E6 • MA-46-9

Session Chair: Andreas Peters, GE AviationSession Co-Chair: Jean-Michel Lourier, General Electric

Session Chair: George Pechlivanoglou, HFI TU BerlinSession Co-Chair: Alessandro Bianchini, Univ of Florence

8:00

Experimental Study on the Turboma-chinery Trailing Edge Noise Reduction GT2016-56453 Fan Tong, Northwestern Polytechnical Uni-

versity, Xi An, China, XunNian Wang, State Key Laboratory of Aerodynamics , China Aerodynamics Research and Development Center, Mianyang, China, Weiyang Qiao, Northwestern Polytechnical University, Xi’an, China, Liang Ji, KunBo Xu, Northwestern Polytechnical University, Xi An, China

Overview and Challenges of Modern Hori-zontal Axis Wind Turbine Blade Design GT2016-58357 George Pechlivanoglou, HFI TU Berlin, Berlin,

Germany

8:30

Aerodynamic Performance and Acous-tic Characteristics of Bionic Airfoil Inspired by Three-Dimensional Long-Eared Owl Wing Under Low Reynolds Number GT2016-57137 Dian Li, Xiaomin Liu, Xi'an Jiaotong Universi-

ty, Xi'an, Shaanxi, China

Overview and Challenges of Modern Hori-zontal Axis Wind Turbine Blade Design GT2016-58358 George Pechlivanoglou, HFI TU Berlin, Berlin,

Germany

9:00

Experimental Assessment of Noise Generation and Transmission in a High-Pressure Transonic Turbine Stage GT2016-57209 Karsten Knobloch, Lars Neuhaus, DLR, Ber-

lin, Germany, Paolo Gaetani, Giacomo Persi-co, Politecnico Di Milano, Milano, Italy, Fried-rich Bake, DLR, Berlin, Germany

Review of the main aeroelastic modeling techniques for wind turbine blade simula-tion GT2016-58359 Joseph Saverin, Technische Universitat Berlin,

Berlin, Germany

9:30

Acoustic Mode Analysis: Numerical and Experimental Results of a Turning Mid Turbine Frame GT2016-57754 Stefan Zerobin, Pascal Bader, Christian

Faustmann, Andreas Marn, Emil Göttlich, Franz Heitmeir, Graz University of Technolo-gy, Graz, Austria

Unsteady aerodynamics and their effect in wind turbine blade design and simulation GT2016-58360 Juliane Wendler, HFI / TU Berlin, Berlin, Germany

52 | ASME 2016 TURBO EXPO

MONDAY, JUNE 13 2:30 - 5:30 PM

AIRCRAFT ENGINE COMBUSTION, FUELS & EMISSIONS

COMBUSTION, FUELS & EMISSIONS

Innovative, Collaborative Aero-Engine Technologies for

the FutureNovel Combustion Concepts I Combustion Modeling: Combus-

tor Simulations

Panel Session • Room 402 • MB-1-14 Paper Session • Room 317C • MB-4-5 Paper Session • Room E3 • MB-4-25

Session Chair: Konstantinos Kyprian-idis, Mälardalen University

Session Chair: Adnan Eroglu, GESession Co-Chair: Bernd Prade, Siemens AG KWU

Session Chair: Alejandro Briones, Universi-ty of Dayton Research Institute

2:30

Advanced Aero-Engines Technology Enablers: An Overview of the European Project E-Break GT2016-56572 Dr. Manuel Silva, Nicolas Tantot, Dr. Serge Selezneff, Mi-

chael Walsh, Dr. Rose Nyatando, Erik Johann, Thomas Klauke, Michele Coppola, Andre Kando

Investigation of Ozone Stimulated Combustion in the SGT-800 Burner at Atmospheric Conditions GT2016-57111 Andreas Lantz, Siemens Industrial Turbomachinery

AB, Finspong, Sweden, Andreas Ehn, Jiajian Zhu, Ar-man Ahamed Subash, Lund University, Lund, Sweden, Jenny Larfeldt, Siemens Industrial Turbomachinery AB, Finspong, Sweden, Elna J.K. Nilsson, Zhongshan Li, Marcus Aldén, Lund University, Lund, Sweden

Comparing Spray and Flame Behavior in a Swirl Liquid Fueled Lean Burner With Sin-gle and Multipoint Injections GT2016-57353 Maria Grazia De Giorgi, Aldebara Sciolti, Stefano

Campilongo, Antonio Ficarella,

3:00

ULTIMATE - Ultra Low emission Tech-nology Innovations for Mid-century Aircraft Turbine Engines GT2016-58291 Tomas Grönstedt, Chalmers University, Go-

thenburg, Sweden

Influence of Combustor Geometry on Swirl Stabilized Premixed Methane-Air Flame GT2016-57165 Yiheng Tong, Mao Li, Lund University, Lund,

Lund, Sweden, Jens Klingmann, Lund Universitet, Lund, Sweden

Investigation of Fuel Distribution in Par-tially Premixed Swirled Burner With Pilot Flame GT2016-57478 Sergey S. Matveev, Ivan V. Chechet, Ivan A. Zu-

brilin, Mikhail Yu Orlov, Sergey G. Matveev,

3:30

Boundary-Layer Ingesting Fan Design for Next Generation Aircraft GT2016-58276 William Cousins, United Technologies Re-

search Center, Glastonbury, CT, United States

E-Class Late Fuel Staging Technology De-livers Flexibility Leap GT2016-57964 Carey E. Romoser, James Harper, GE, Greenville,

SC, United States, Matthew Wilson, GE, Greer, SC, United States, Joseph Citeno, Mihir Lal, Derrick W. Simons, GE, Greenville, NC, United States

Nonlinear Hydrodynamics of a Bluff-Body Stabilized Turbulent Premixed Flame GT2016-57492 Chin Yik Lee, Robert Stewart Cant, University of

Cambridge, Cambridge, United Kingdom

4:00

Turbines and Structures for Ultra-High Pressure Ratio Aero-Engines GT2016-57307 Anders Lundbladh, Ralf VON DER BANK, Ste-

fan Donnerhack, Anthony Rae, Mark Stokes, SEBASTIEN BOURGOIS, Oscar Caballero, Natalia Soldevilla, Richard Avellán, , Stefan Forsman, Wolfgang Sturm, Joris Versluis, Artur Ornat, Tomasz Mrugala, Lucjan Kraj,

Pilot-Pilot Interaction Effects on a Proto-type DLE Gas Turbine Burner Combustion GT2016-57338 Atanu Kundu, Lund Universitet, SKANE, Sweden,

Arman Ahamed Subash, Robert Collin, Lund Uni-versity, Lund, Skane, Sweden, Jens Klingmann, Lund Universitet, Lund, Sweden

Impact of Flame Stretch and Heat Loss on Heat Release Distributions in Gas Turbine Combustors: Model Comparison and Vali-dation GT2016-57625 Noah Klarmann, Thomas Sattelmayer, Benja-

min Timo Zoller, Weiqun Geng, Fulvio Magni,

4:30

Innovation driven by environmentGT2016-58070 Desvallees Yves, Safran-Snecma, Moissy-Cra-

mayel Cedex, France

Gaseous Fuel Flame Stabilization in a Mod-ular Swirled Burner GT2016-57441 Ivan A. Zubrilin, Roman A. Zubrilin, Sergey S.

Matveev, Sergey G. Matveev, SSAU, Samara, Russia

Investigation of Siemens SGT-800 Indus-trial Gas Turbine Combustor Using Differ-ent Combustion and Turbulence Models GT2016-57694 Daniel Lörstad, Anders Ljung, Abdallah Abou-

Taouk,

5:00

Advanced Technology Development and Collaboration for the Future of Flight GT2016-58362 David Halstead, GE Aviation, Cincinnati, OH, United States

GT2016-58351 Konstantinos Kyprianidis, Mälardalen University, Västerås, Sweden

Development of Requirements for Numeri-cal Modeling of the Premixer Aerodynamic GT2016-57529 Vladislav Nazukin, Aviadvigatel OJSC, Perm,

Russia, Valery Avgustinovich, Perm National Re-search Polytechnic University, Perm, Russia

Coupled CFD and Heat Transfer Analysis for a Small Scale Gas Turbine Combustor GT2016-57846 Altug Piskin, TUSAS Engine Industries, Inc., Es-

kisehir, Turkey, Ahmet Topal, TUSAS Engine In-dustries, Inc., Eskisehir, Turkey

FINAL PROGRAM | 53

MONDAY, JUNE 13 2:30 - 5:30 PM

COMBUSTION, FUELS & EMISSIONS

COMBUSTION, FUELS &

EMISSIONS

CONTROLS, DIAGNOSTICS & INSTRUMENTATION ELECTRIC POWER

Combustor Design & Development II

Combustion Funda-mentals Pressure Probes and Sensors

IGCC Integrated Gasification Com-

bined Cycle

Paper Session • Room 317C • MB-4-12 Tutorial Session • Room E6 • MB-4-32 Paper Session • Room 308B • MB-5-8 Tutorial Session •

Room 401 • MB-8-5

Session Chair: Adnan Eroglu, GESession Co-Chair: Bernd Prade, Siemens AG KWU

Session Chair: Mike Klas-sen, Combustion Science & Engineering Inc.Session Co-Chair: Tim Lieuwen, Georgia Insti-tute of Technology

Session Organizer: Richard Bunce, SiemensSession Co-Chair: Peter Loftus, Rolls-royce Plc

Session Chair: Justin Zachary, Samsung

2:30

Investigation of Ozone Stimulated Com-bustion in the SGT-800 Burner at Atmo-spheric Conditions GT2016-5711 Andreas Lantz, Jenny Larfeldt Siemens Indus-

trial Turbomachinery AB, Andreas Ehn, Jiajian Zhu, Arman Ahamed Subash, Elna J.K. Nilsson, Zhongshan Li, Marcus Aldén, Lund University

T

U

T

O

R

I

A

L

Quasi 2D Flow-Adaptive Algorithm for Pneumatic Probe Measurements GT2016-56624 Christian Bartsch, Magnus Hölle, Peter

Franz Jeschke, RWTH Aachen University, Aachen, Germany, Timo Metzler, MTU Aero Engines GmbH, Munich, Germany

T

U

T

O

R

I

A

L

3:00

Influence of Combustor Geometry on Swirl Stabilized Premixed Methane-Air Flame GT2016-57165 Yiheng Tong, Mao Li, Jens Klingmann, Lund

University

Evaluation of Measurement Uncer-tainties for Pneumatic Multi-Hole Probes Using a Monte Carlo Method GT2016-56626 Magnus Hölle, Christian Bartsch, Peter

Franz Jeschke, RWTH Aachen University, Aachen, Germany

3:30

E-Class Late Fuel Staging Technology Delivers Flexibility Leap GT2016-57964 Christian Bartsch, Magnus Hölle, Peter

Carey E. Romoser, James Harper, Matthew Wilson, Joseph Citeno, Mihir Lal, Derrick W. Simons, GE

4:00

Pilot-Pilot Interaction Effects on a Pro-totype DLE Gas Turbine Burner Com-bustion GT2016-57338 Atanu Kundu, Arman Ahamed Subash, Rob-

ert Collin, Jens Klingmann Lund Universitet

Fast Settling Millimetre-Scale Five-Hole Probes GT2016-56628 Sam Grimshaw, University of Cambridge,

Cambridge, United Kingdom, James V. Taylor, Whittle Laboratory, University of Cambridge, Cambridge, United Kingdom

4:30

Gaseous Fuel Flame Stabilization in a Modular Swirled Burner GT2016-57441 Ivan A. Zubrilin, Roman A. Zubrilin, Sergey S.

Matveev, Sergey G. Matveev, SSAU

Development of a Fast Response Aerodynamic Pressure Probe Based on a Waveguide Approach GT2016-57650 Andrea Fioravanti, University of Flor-

ence, School of Engineering, Firenze, It-aly, Giulio Lenzi, University of Florence, Florence, Italy, Giovanni Ferrara, Univ Of Florence, Florence 50139, Italy, Lorenzo Ferrari, National Research Council of Ita-ly, Sesto Fiorentino (FI), Italy

5:00

Development of Requirements for Nu-merical Modeling of the Premixer Aero-dynamic GT2016-57529 Vladislav Nazukin, Aviadvigatel OJSC,

Valery Avgustinovich, Perm National Re-search Polytechnic University

54 | ASME 2016 TURBO EXPO

MONDAY, JUNE 13 2:30 - 5:30 PM

HEAT TRANSFER: CONJUGATE HEAT TRANSFER

HEAT TRANSFER: GENERAL HEAT TRANSFER HEAT TRANSFER: TUTORIALS

Conjugate Analyses of Film Cooling/Internal Flows Gas Path Heat Transfer Heat Transfer Tutorials II

Paper Session • Room 307A • MB-10-2 Paper Session • Room 307B • MB-13-1 Tutorial Session • Room 301 • MB-14-2

Session Organizer: Phil Ligrani, Universi-ty of Alabama In HuntsvilleSession Co-Organizer: Jing Ren, Tsinghua University

Session Organizer: Hee-Koo Moon, Solar Turbines IncSession Co-Organizer: Changmin Son, Pusan National University

Session Organizer: Bijay K. Sultanian, Takaniki Communications, LLC

2:30

Impingement/Effusion Cooling Wall Heat Transfer: Conjugate Heat Transfer Computational Fluid Dynamic GT2016-56961 Gordon E. Andrews, Univeristy of Leeds, Leeds,

United Kingdom, Abubakar El-Jummah, Univer-sity of Maiduguri, Maduguri, Nigeria, John Staggs, University of Leeds, Leeds, United Kingdom

Numerical and Experimental Investigation of Aero-dynamics on Flow Around a Highly Loaded Low-Pres-sure Turbine Blade With Flow Separation Under Steady and Periodic Unsteady Inlet Flow Condition GT2016-56699 Ali Nikparto, Texas A&M University, College Sta-

tion, TX, United States, Meinhard T. Schobeiri, Texas A & M University, College Station, TX, Unit-ed States

Tutorial: Conjugate Heat Transfer GT2016-56035 Atul Kohli, Pratt & Whitney, Tolland, CT, United

States

3:00

Impingement Jet Cooling With Ribs and Pin Fin Obstacles in Co-Flow Configurations: Conjugate Heat Transfer Computational Fluid Dynamic Predictions GT2016-57021 Gordon E. Andrews, Univeristy of Leeds, Leeds,

United Kingdom, Abubakar El-Jummah, Univer-sity of Maiduguri, Maduguri, Nigeria, John Staggs, University of Leeds, Leeds, United Kingdom

Aero-Thermal Performance of a Nozzle Vane Cas-cade With a Generic Non Uniform Inlet Flow Condi-tion: Part I Influence of Non Uniformity Location GT2016-57438 Antonio Perdichizzi, Hamed Abdeh, University Of

Bergamo, Dalmine (BG), Italy, Giovanna Barigo-zzi, Universita’ Di Bergamo, Dalmine, Italy, Marc Henze, Joerg Krueckels, Ansaldo Energia Swit-zerland Ltd., Baden, AG, Switzerland

Tutorial: Numerical Internal Cooling GT2016-56022 Domenico Borello, Università di Roma Sapienza,

Rome, Italy

3:30

Overall Cooling Effectiveness on a Flat Plate With Both Film Cooling and Im-pingement Cooling in Hot Gas Condition GT2016-57224 Bo Shi, Jia Li, Mingfei Li, Jing Ren, Hongde

Jiang, Tsinghua University, Beijing, China

Aero-Thermal Performance of a Nozzle Vane Cascade With a Generic Non Uniform Inlet Flow Condition: Part II Influence of Purge and Film Cooling Injection GT2016-57445 Giovanna Barigozzi, Universita’ Di Bergamo,

Dalmine, Italy, Hamed Abdeh, Antonio Perdi-chizzi, University of Bergamo, Dalmine (BG), Italy, Marc Henze, Joerg Krueckels, Ansaldo Energia Switzerland Ltd., Baden, AG, Switzerland

Tutorial: Numerical Film Cooling GT2016-56031 Malak Malak, Honeywell International, Phoenix,

AZ, United States

4:00

Conjugate Heat Transfer Analysis for Laminated Cooling Effectiveness: Part A Effects of Surface Curvature GT2016-57243 Weilun ZHOU, Institute of Turbomachinery,

Xi'an JiaoTong University, Xi’an, Shaanxi Province, China, Qinghua DENG, Institute of Turbomachinery, Xi’an Jiaotong University, Xi’an, Shaanxi Province, China, Zhenping Feng, Xi’an Jiaotong University, Shaanxi, Shaanxi, China

Temperature Effects on Nozzle Guide Vane Deposition in a New Turbine Cascade Rig GT2016-57560 Ryan Lundgreen, The Ohio State University, Co-

lumbus, OH, United States, Craig Sacco, Ohio State University, Columbus, OH, United States, Robin Prenter, The Ohio State University, Colum-bus, OH, United States, Jeffrey Bons, Ohio State Univ, Columbus, OH, United States

Tutorial - Structures GT2016-56019 Thomas Weiss, Rolls Royce Deutschland Ltd &

Co. KG, Blakenfeld-Mahlow, Germany

4:30

Experimental Characterization of the Vane Heat Flux Under Pulsating Trailing-Edge Blowing GT2016-58100 Jorge Saavedra, Guillermo Paniagua, Purdue

University, West Lafayette, IN, United States, Bayindir H. Saracoglu, Von Karman Institute For Fluid Dynamics, Rhode-saint-Genese, Belgium

Tutorial - General Heat Transfer GT2016-56018 James P. Downs, Florida Turbine Technology,

Inc., Jupiter, FL, United States

5:00

Conjugate Heat Transfer Analysis for Laminated Cooling Effectiveness: Part B Effects of Film Hole Incline Angle GT2016-57256 Qinghua DENG,Weilun ZHOU, Zhenping

Feng,

Computational and Experimental Studies of Midpassage Gap Leakage and Misalign-ment for a Non-Axisymmetric Contoured Turbine Blade Endwall GT2016-56128 Eric Lange, Stephen Lynch, Penn State Universi-

ty, University Park, PA, United States, Scott Lewis, Pratt & Whitney, East Hartford, CT, United States

FINAL PROGRAM | 55

MONDAY, JUNE 13 2:30 - 5:30 PM

INDUSTRIAL & COGENERATION

MANUFACTURING MATERIALS & METALLURGY

MICROTURBINES, TURBOCHARGERS & SMALL

TURBOMACHINES

Cogeneration, CHP Application, Waste Heat Recovery

Additive Manufacturing - 3D Printing

Turbochargers - Compressors & Turbines

Paper Session • Room 318A • MB-20-3 Paper Session • Room 317B • MB-21-1 Paper Session • Room 327 • MB-23-9

Session Chair: Mauro Venturini, Univer-sità degli Studi di FerraraSession Co-Chair: Maria Alessandra An-cona, University of Bologna

Session Chair: Yong Yang, General ElectricSession Co-Chair: Ingomar Kelbassa, Sie-mens AG, Berlin

Session Chair: Apostolos Pesiridis, Brunel University London

2:30

Performance Simulation of 3-Stage Gas Tur-bine CHP Plant for Marine Applications GT2016-56312 Yiguang Li, Cranfield University, Bedford

Mk43 0al, United Kingdom, Zhitao Wang, Shuying Li, Harbin Engineering University, Harbin, China

Reheat Burner Front Panel Produced by Additive Manufacturing Challenges: Strat-egies and Engine Validation GT2016-57458 Michael Maurer, Patricia Sierra, Patrik Meng,

Ansaldo Energia Switzerland Ltd., Baden, Swit-zerland

Circumferential Flow Differences in the Double-Sided Centrifugal Compressor WithNon-Balanced Inlets GT2016-56167 Ce Yang, Yixiong Liu, Wangxia Wu, Beijing In-

stitute of Technology, Beijing, China, Lei Jing, Beijing Institute of Technology, 100081, China, Benjiang Wang, Shan Chen, Beijing Institute of Technology, Beijing, China

3:00

Investigation of Different Operation Strate-gies to Provide Balance Energy With an Indus-trial CHP Plant Using Dynamic Simulation GT2016-57166 Steffen Kahlert, Technische Universität

München, Garching b. München, Bavaria, Ger-many, Hartmut Spliethoff, Technische Uni-versitaet Muenchen / ZAE Bayern, Garching bei Muenchen, Bavaria, Germany

Additive Manufacturing of Hot Gas Path Parts and Engine Validation in a Heavy Duty GT GT2016-57262 Julius Schurb, GE Power, Birr, Switzerland, Thom-

as Etter, Laura Bogdanic, GE Power, Baden, Swit-zerland, Matthias Hoebel, GE Power, Birr, Swit-zerland, Hartmut Haehnle, Harald Peter Kissel, GE Power, Baden, Switzerland

Investigation on the Performance and Flow Structure of Centrifugal Compressor: Under-stand the Inlet Bent Duct Configurations GT2016-56169 Ce Yang, Yixiong Liu, Beijing Institute of Tech-

nology, Beijing, China, LeiLei Wang, Hebei Uni-versity Of Engineering, Handan, China, Dazhong Lao, Changmao Yang, Beijing Institute of Tech-nology, Beijing, China

3:30

Evaluation of Performance Robustness of a Gas Turbine Cogeneration Plant-Based on a Mixed-Integer Linear Model GT2016-56217 Ryohei Yokoyama, Ryo Nakamura, Tetsuya

Wakui, Osaka Prefecture University, Sakai, Osaka, Japan, Yuji Shinano, Zuse Institute Berlin, Berlin, Germany

Characterization of LAM-Fabricated Po-rous Superalloys for Turbine Components GT2016-58080 Brandon Ealy, Luisana Calderon, Wenping

Wang, Ranier Valentin, Ilya Mingareev, Martin Richardson, Jay Kapat

Acoustic Measurements From an Automotive Cen-trifugal Compressor With a Switchable Dual-Port Casing Treatment for Extended Operating Range GT2016-56705 Rick Dehner, Ahmet Selamet, Michael Steiger, Har-

old Sun, Dave Hanna, Liangjun Hu,

4:00

Development and Performance Mea-surements of a Beta-Type Free-Piston Stirling Engine Along With Dynamic Model Predictions GT2016-57207 Kyuho Sim, Dong-Jun Kim, Seoul National

University of Science and Technology, Seoul, Korea (Republic)

Developing Additive Manufacturing Tech-nology for Burner Repair GT2016-56594 Olov Andersson, Siemens Industrial Turboma-

chinery, Finspong, Sweden, Vladimir Navrotsky, Siemens, Finspong, Sweden, Håkan Brodin, Sie-mens Industrial Turbomachinery, Finspång, Swe-den, Andreas Graichen, Siemens Industrial Tur-bomachinery, Finspong, Sweden

Numerical Optimization and Manufactur-ing of the Impeller of a Centrifugal Com-pressor by Variation of Splitter Blades GT2016-57105 S.Abolfazl Moussavi Torshizi, Sharif University

of technology, Tehran, Iran, Ali Hajilouy-Benisi, Sharif Univ Of Technology, Tehran, Iran, Mo-hammad Durali, Sharif University of Technolo-gy, Tehran, Iran

4:30

Cogenerative Performance of a Wind Gas Turbine Organic Rankine Cycle In-tegrated System for Offshore Applica-tions GT2016-57167 Valentina Orlandini, Michele Bianchi, Lisa

Branchini, Andrea De Pascale, Fredrik Haglind, Francesco Melino, Antonio Peretto, Leonardo Pierobon

Investigation of Cross Flow in Double En-try Turbocharger Turbines GT2016-57190 Dominik Lückmann, FEV GmbH, Aachen, Ger-

many, Max Stadermann, Stefan Pischinger, In-stitute for Combustion Engines, RWTH Aachen University, Aachen, Germany, Richard Aymanns, FEV GmbH, Aachen, Germany

5:00

Establishment of a Competitive Additive Manufacturing Workshop GT2016-57461 Paul Ryan, Jan Schwerdtfeger, Markus Roder-

mann, General Electric Switzerland GmbH, Birr, Switzerland

56 | ASME 2016 TURBO EXPO

MONDAY, JUNE 13 2:30 - 5:30 PM

OIL & GAS APPLICATIONS STEAM TURBINESSTRUCTURES & DYNAMICS:

EMERGING METHODS IN DESIGN & ENGINEERING

Compressor Fouling Mechanisms and Modeling

Steam Turbine Design and Operational Aspects

Experimental Test andEvaluation

Tutorial Session • Room 317A • MB-24-12 Paper Session • Room E2 • MB-26-8 Paper Session • Room 300 • MB-27-2

Session Chair: Michele Pinelli, University of FerraraSession Co-Chair: Klaus Brun, Southwest Research Institute, Rainer Kurz, Solar Turbines Incorporated

Session Chair: Peter Stein, GE PowerSession Co-Chair: Xianhong Wu, PCA Engi-neers Ltd

Session Chair: Partha Das, PSM, Ansaldo Energia GroupSession Co-Chair: Bernd Beirow, Branden-burg University of Technology Cottbus

2:30

T

U

T

O

R

I

A

L

“Setup, Validation and Probabilistic Ro-bustness Estimation of a Model for Predic-tion of LCF in Steam Turbine Rotors” GT2016-57321 David Pusch, Peter Dumstorff, Henning Almst-

edt, Matthias Voigt, Konrad Vogeler

Experimental Investigation of Fluid Struc-ture Interaction of Impeller Like Disks in super critical carbon dioxide GT2016-58032 Hajo Pereboom, Pieter Van Beek, TNO, Delft,

Netherlands, Johannes Smeulers, TNO Science And Industry, Delft, Netherlands

3:00

Thermal modelling of an intermediate pres-sure steam turbine by means of conjugate heat transfer - simulation and validation GT2016-57247 Dominik Born, Peter Stein, Gabriel Marinescu,

GE Power, Baden, Switzerland, Stefan Koch, Dan-iel Schumacher, ZHAW, Winterthur, Switzerland

Fault Diagnosis on an Aircraft Engine Mod-el Equipped With Self-Sensing Piezoelec-tric Actuators GT2016-56975 Ramakrishnan Ambur, Xiaonan Zhao, Stephan

Rinderknecht, Technische Universität Darm-stadt, Darmstadt, Germany

3:30

Statistical Evaluation of the Performance Impact of Manufacturing Variations for Steam Turbines GT2016-56553 Juntao Xiong, Jing Yang, Ivan Mcbean, Said Ha-

vakechian, Feng Liu

Investigation of Shock-Wave/Bound-ary-Layer Interaction on Aeroelastic Sta-bility: Towards Active Control GT2016-57302 Quentin Rendu, Yannick Rozenberg, Universi-

te Claude Bernard Lyon 1, Villeurbanne, France, Stephane AUBERT, Pascal Ferrand, Ecole Cen-trale De Lyon, Ecully, OO, France

4:00

The Exergy Optimization Analysis of 700° HUSC Steam Turbine Using a Echelon Cycle System GT2016-57102 Xiaolan Yi, Shiwang Fan, Haitao Li, Jiandao

Yang, Tao Chen, Hong Yang

Investigation on the Turbine Blade Tip Clearance Monitoring Based on Eddy Cur-rent Pulse-Trigger Method GT2016-56931 Weimin Wang, Huajin SHAO, Lifang CHEN,

Huibin Song, Beijing University of Chemical Technology, Beijing, China

4:30

5:00

Thermodynamic Analysis of Supercritical and Subcritical Rankine Cycles GT2016-57814 Martín Salazar-Pereyra, Raúl Lugo-Leyte, An-

gélica Elizabeth Bonilla-Blancas, Helen Lu-go-Méndez

“NovaLT16 Bearing #2 Oil System Design: Test Rig Architecture, Functional Tests and Design Challenges” GT2016-56472 Manfredi Mazzola, Paolo Di Sisto, Andrea Si-

gnori, Silvia Evangelisti

FINAL PROGRAM | 57

MONDAY, JUNE 13 2:30 - 5:30 PM

STRUCTURES & DYNAMICS: ROTORDYNAMICS

STRUCTURES & DYNAMICS: STRUCTURAL MECHANICS,

VIBRATION & DAMPING

SUPERCRITICAL CO2 POWER CYCLES

Rotordynamic Analysis I Dynamics of Bladed Disks with Nonlinearities sCO2 Compressors

Paper Session • Room 307C • MB-30-1 Paper Session • Room 308A • MB-32-5 Paper Session • Room 308C • MB-36-2

Session Chair: Daniel Lubell, Oil-Free Ma-chinery, YorbaSession Co-Chair: Aaron Rimpel, South-west Research Institute

Session Chair: Fabrice Thouverez, Ecole Centrale de LyonSession Co-Chair: Kiran D’souza, The Ohio State University

Session Chair: Tim Allison, Southwest Re-search Institute Session Co-Chair: Sarah Simons, Southwest Research Institute

2:30

Periodicity and Stability in Transverse Motion of a Nonlinear Rotor-Bearing System Using Generalized Harmonic Balance Method GT2016-56269 Zhi wei Liu, Yuefang Wang, Dalian Univer-

sity of Technology, Dalian, Liaoning Province, China

A Fractal Contact Friction Model and Non-linear Vibration Response Studies of Loose-ly Assembled Blade With Dovetail Root GT2016-56271 Shangguan Bo, Yu Feilong, Duan Jingyao, Gao

Song, Xiao Junfeng, Zili Xu

“Liquid CO2 Formation, Impact, and Mit-igation at the Inlet to a Supercritical CO2 Compressor” GT2016-56513 Melissa Poerner, Grant Musgrove, Griffin Beck,

Southwest Research Institute, San Antonio, TX, United States

3:00

Including Housing-Casing Fluid in a Lat-eral Rotordynamics Analysis on Electric Submersible Pumps GT2016-58087 Dara Childs, Texas A & M Univ, College Sta-

tion, TX, United States, Clay Norrbin, Texas A&M Turbomachinery Lab, College Station, TX, United States, Stephen Phillips, Texas A&M Turbomachinery Lab, Bryan, TX, United States

A Multi-Scale Approach for Nonlinear Dy-namic Response Predictions With Fretting Wear GT2016-56201 Jason Armand, Luca Pesaresi, Imperial College

London, London, United Kingdom, Loic Salles, Christoph Schwingshackl, Imperial college, Lon-don, United Kingdom

Design Parameters Exploration for Supercritical CO2 Centrifugal Compressors Under Multiple Constraints GT2016-56820 Wenyang Shao, Xiaofang Wang, Dalian Uni-

versity of Technology, Dalian, Liaoning, China, Jinguang Yang, Dalian University of Technolo-gy, Dlian, Liaoning, China, Huimin Liu, Zhenjun Huang, Shanghai Micropowers Co., Shanghai, Shanghai, China

3:30

Rotordynamic Modeling of a Rotor on a Flexible Support Structure Utilizing Sol-id Element Modeling and Support Trans-fer Functions GT2016-57012 Lingnan Hu, Alan Palazzolo, Texas A&M Uni-

versity, College Station, TX, United States

A Taylor Series Expansion Approach for Nonlinear Blade Forced Response Predic-tion Considering Variable Rotational Speed GT2016-56375 Torsten Heinze, Lars Panning-von Scheidt, Joerg

Wallaschek, Institute of Dynamics and Vibration Research, Leibniz Universität Hannover, Han-nover, Germany, Dr. Andreas Hartung, MTU Aero Engines AG, München, Germany

Feasibility of a Direct Coupled Tur-bine-Compressor Power Block for S-CO2 Brayton Cycles GT2016-56847 Eshan Dhar, Indian Institute of Science, Banga-

lore, Karnataka, India, Shreyas Srivatsa, Univer-sity of Maryland, College Park, College Park, MD, United States, Pramod Kumar, Indian Institute of Science, Karnataka, India

4:00

Torsional Robustness of the Combined Cycle Power Train Arrangement: Appli-cation of Statistical Methods to Acceler-ate Shaft-Line Design Cycles GT2016-57402 Mateusz Golebiowski, John Ling, Eric Knopf,

Andreas Niedermeyer, General Electric (Swit-zerland) GmbH, Baden, Switzerland

Stability Analysis of Multiharmonic Non-linear Vibrations for Large Models of Gas-Turbine Engine Structures With Fric-tion and Gaps GT2016-57959 Evgeny Petrov, Sussex University, Brighton, Unit-

ed Kingdom

Sensitivity Study of S-CO2 Compressor Design for Different Real Gas Approxima-tions GT2016-57100 JEKYOUNG LEE, Seong Kuk Cho, KAIST, Dae-

jeon, Korea (Republic), Jae Eun Cha, KAERI, Dae-jeon-City, Korea (Republic), Jeong-Ik Lee, Korea Advanced Institute of Science and Technology (KAIST), Daejeon, Korea (Republic)

4:30

An Analytical Model of Flow-Induced Rotordynamic Forces in Shrouded Cen-trifugal Pump Impellers GT2016-57277 Jieun Song, Seoul National University, Seoul,

Korea (Republic), Seung Jin Song, Seoul Na-tional University, Seoul 151-744, Kor

5:00

Analysis of the Dynamic Behavior of Two High-Pressure Turbines for the Possible Detection of Rub Symptoms GT2016-56627 Filippo Cangioli, Paolo Pennacchi, Andrea

Vania, Steven Chatterton, , Phuoc Vinh Dang

Improved Hybrid Frequency-Time Domain Method for Nonlinear Analysis of Friction-ally Damped Blade Systems GT2016-56852 Yalin Liu, Shangguan Bo, Zili Xu

Numerical Investigation of the Flow Be-havior Inside a Supercritical CO2 Centrif-ugal Compressor GT2016-57481 Alireza Ameli, Teemu Turunen-Saaresti, Jari

Backman, Lappeenranta University of Technol-ogy, Lappeenranta, Finland

58 | ASME 2016 TURBO EXPO

MONDAY, JUNE 13 2:30 - 5:30 PM

TURBOMACHINERY: AXIAL FLOW FAN & COMPRESSOR

AERODYNAMICS

TURBOMACHINERY: AXIAL FLOW FAN & COMPRESSOR

AERODYNAMICS

TURBOMACHINERY: AXIAL FLOW TURBINE AERODYNAMICS

Inlet Distortion Effects Cascade Studies Cavity Flows

Paper Session • Room 403 • MB-37-2 Paper Session • Room 318B • MB-37-13 Paper Session • Room E4 • MB-38-14

Session Chair: Alessandro Corsini, Sapi-enza University of RomeSession Co-Chair: David Volponi, Sapien-za University of Rome

Session Chair: Kwang-yong Kim, Inha UnivSession Co-Chair: Abdus Samad, IIT

Session Chair: Sergio Lavagnoli, Von Kar-man Inst for Fluid DynamicsSession Co-Chair: Jose Maria Rey Villazon, GE Aviation

2:30

Investigation of Engine Distortion In-teraction GT2016-56208 Fabian Wartzek, Heinz-Peter Schiffer, Ja-

kob Haug, Reinhard Niehuis, Martin Bitter, Christian Kähler

Effects of a Skewed Inlet Boundary Layer on the Aerodynamic Performance of a Stator-Hub Equivalent High-Turning Compressor Cascade GT2016-56087 Christoph Bode, Jörg Hoffmann, Udo Stark

The Investigations of the Balance Hole Area and Radial Seal Clearance's Influences on Turbine Ef-ficiency in the Wheel Chamber GT2016-56102 Guoliang Deng, Qi Sun, Shan Wang, Chaoyang

Tian, Qi Wu, Xiaodan Zhang, Xiaoqin Du

3:00

Efficient Modeling Strategy of an Axial Com-pressor Fan-Stage Under Inlet Distortion GT2016-57467 Bryan Lobo, ANSYS Software Pvt. Ltd., Pune,

Maharashtra, India, Laith Zori, ANSYS Inc., Lebanon, NH, United States, Paul Galpin, AN-SYS Canada Ltd, Waterloo, ON, Canada, Bill Holmes, ANSYS, Waterloo, ON, Canada

Effects of Turbulent Boundary Conditions on the Prediction of the Secondary Flow Field in a Linear Compressor Cascade GT2016-56455 Peter Busse, Andreas Krug, Martin Lange, TU

Dresden, Dresden, Germany, Konrad Vogeler, Ronald Mailach, Technische Universität Dresden, Dresden, Germany

Experimental and Numerical Investigation of Unsteady Structures Within the Rim Seal Cavity in the Presence of Purge Mass Flow GT2016-56500 Cengiz Camci, Penn State University, University

Park, PA, United States, Jason Town, Michael Averbach, The Pennsylvania State University, University Park, PA, United States

3:30

Effects of Total Pressure Inlet Distortion on Transonic Fan Blade Wake Properties GT2016-57703 Anthony Ferrar, University of Florida, Gaines-

ville, FL, United States, William C. Schneck, III, Alfred Wicks, Virginia Polytechnic Insti-tute and State University, Blacksburg, VA, United States, Walter O’Brien, Virginia Tech University, Blacksburg, VA, United States

Investigation on Pitch-Wise Non-Uniform and Inflecting Inlet Flow of Low-Speed Plane Cascade GT2016-56934 Xingxu XUE, Xun Zhou, Harbin Institute of Tech-

nology, Harbin, Heilongjiang, China, Xun Liu, De-partment of gas turbine, No.703 research institute of CSIC, Harbin, Heilongjiang, China, Fengbo Wen, Harbin Institute of Technology, Harbin, China

Influence of a Shroud Axisymmetric Slot Injection on a High Pressure Turbine Flow GT2016-56608 Etienne Tang, Turbomeca, Bordes, France, Isa-

belle Trebinjac, LMFA - Ecole Centrale de Lyon, Ecully, France, Ghislaine Ngo Boum, Ecole Cen-trale de Lyon-LMFA, Ecully, France, Gilles Leroy, Turbomeca, Bordes Cedex, France, Mickael Phi-lit, Turbomeca, Bordes, France

4:00

Analysis of Fan Stage Design Attributes for Boundary Layer Ingestion GT2016-57808 David K. Hall, E.M. Greitzer, C.S. Tan, Massa-

chusetts Institute of Technology, Cambridge, MA, United States

Numerical Investigation of Intermittent Cor-ner Separation in a Linear Compressor Cascade GT2016-57311 Wei Ma, Shanghai Jiao Tong University, Shanghai,

China, Feng Gao, University of Surrey, Guildford, United Kingdom, Xavier Ottavy, CNRS - LMFA, Ecully, France, Lipeng Lu, Beihang University, Bei-jing, Beijing, China, Anjenq Wang, Shanghai Jiao Tong University, Shanghai, China

Modulation and Radial Migration of Tur-bine Hub Cavity Modes by the Rim Seal Purge Flow GT2016-56661 Rainer Schädler, Anestis I. Kalfas, Reza S.

Abhari, Gregor Schmid, Stefan Völker

4:30

Fan Performance Scaling With Inlet Dis-tortions GT2016-58009 Jeff Defoe, University of Windsor, Windsor,

ON, Canada, David K. Hall, Massachusetts In-stitute of Technology, Cambridge, MA, United States

High-Pressure Turbine Rim Seal Design for Increased Efficiency GT2016-57495 Martin Chilla, Howard Hodson, Graham Pullan,

David Newman

5:00

Effects of Circumferential Inlet Distor-tion on the Performance of a Transonic Fan Together With the Impact of Tip Injection GT2016-58145 Hossein Khaleghi, Reza Jalaly, Amirkabir

University of Technology, Tehran, Iran

Detailed Investigation of RANS and LES Pre-dictions of Loss Generation in an Axial Com-pressor Cascade at Off Design Incidences GT2016-57972 John Leggett, Stephan Priebe, Richard D. Sand-

berg, Aamir Shabbir, Vittorio Michelassi

Experimental Investigation of Turbine Stage Flow Field and Performance at Varying Cavity Purge Rates and Operating Speeds GT2016-57735 Johan Dahlqvist, Royal Institute of Technology,

Stockholm, Sweden, Jens Fridh, KTH Royal Insti-tute of Technology, Stockholm, Sweden

FINAL PROGRAM | 59

MONDAY, JUNE 13 2:30 - 5:30 PM

TURBOMACHINERY: DUCTS & COMPONENT INTERACTIONS

TURBOMACHINERY: MULTIDISCIPLINARY DESIGN

APPROACHES, OPTIMIZATION & UNCERTAINTY

QUANTIFICATION

WIND ENERGY HONORS AND AWARDS

Gas Turbine Engine Component and Flow Interactions Turbine Design and Cooling Introduction to

Wind Energy

2016 Aircraft Engine

Technology Award Lecture

Paper Session • Room E1 • MB-40-3 Paper Session • Room 318C • MB-45-4 Tutorial Session • Grand Ballroom •

MB-46-8

Lecture Session Room 301 • MB-48-1

Session Chair: Berardo Paradiso, Po-litecnico di MilanoSession Co-Chair: Mauro Carnevale, Asad Asghar, Davide Lengani

Session Chair: Shahrokh Shahpar, Rolls-Royce plc.Session Co-Chair: Francesco Montomoli, Im-perial College London

Session Chair: Ndaona Chokani, ETH Zurich

Session Chair: An-drew Nix, West Vir-ginia University, Mor-gantown

2:30

Investigation of Penny Leakage Flows of Variable Guide Vanes in High Pres-sure Compressors GT2016-56327 Hannes Wolf, Matthias Franke, MTU Aero Engines AG,

Munich, Germany, Alexander Halcoussis, MTU Aero Engine AG, Munich, Germany, Christophe Kleinclaus, Sebastien Gautier, Exa GmbH, Munich, Germany

Robust Optimization of the HPT Blade Cooling and Aerodynamic Efficiency GT2016-56195 Kirill Vinogradov, Gennady Kretinin, Kseniya

Otryahina, Roman Didenko, Dmitriy Karelin, Yury Shmotin, NPO Saturn, Rybinsk, Russia

T

U

T

O

R

I

A

L

Turbine Blade Cool-ing Research at Texas A&M 1980 -2016 GT2016-58341 JC Han, Texas A & M

University

3:00

Automated Multi-Code URANS Simula-tion of Compressor-Combustor Compo-nents GT2016-56904 Karpaga Vipran Kannan, Gary J. Page,

Loughborough University, Loughborough, United Kingdom

Multi-Objective Optimization of the Impinge-ment-Film Cooling Structure of a HPT End-wall Using Conjugate Heat Transfer CFD GT2016-56559 Zhongran Chi, Shanghai Jiao Tong University,

Shanghai, Shanghai, China, Haiqing Liu, Shang-hai Advanced Research Institute, Shanghai, Chi-na, Shusheng Zang, SHANGHAI JIAO TONG UNI-VERSITY ,CHINA, SHANGHAI, China

3:30

Design of an Intermediate Turbine Duct Downstream of a High Pressure Turbine GT2016-56476 Chaoshan Hou, Hu Wu, Northwestern Poly-

technical University, Xi’an, China

A Bi-Fidelity Approach for Uncertainty Quantification of Heat Transfer in a Rect-angular Ribbed Channel GT2016-58092 Alireza Doostan, University of Colorado Boulder,

Boulder, CO, United States, Gianluca Geraci, Gi-anluca Iaccarino, Stanford University, Stanford, CA, United States

4:00

Optimized Aerodynamic Design of Ag-gressive Intermediate Turbine Duct With Strut Fairings Using Genetic Algo-rithms GT2016-56639 Chen Yang, Northwestern Polytechnical

University, Xi'an, shaanxi, China, Hu Wu, Northwestern Polytechnical University, Xi’an, Shaan’xi, China

Adjoint Based Unsteady Aerodynamic Op-timization of a Transonic Turbine Stage GT2016-56885 Can Ma, Xinrong Su, Tsinghua University, Beijing,

China, Xin Yuan, Tsinghua University, Dept. of Thermal Eng., Beijing, China

4:30

Minimisation of Ducted Flow Non-Unifor-mity Caused by Downstream Blockages GT2016-56199 Max Rife, Fernando Barbarossa, Anthony

Parry, Jeffrey S. Green, Luca Di Mare

FLOvane: A New Approach for HP Vane Design GT2016-57285 Dingxi Wang, Francesco Ornano, Y.S. Li, Roger

G. Wells, Christer Hjalmarsson, Lars Hedlund, Thomas Povey

5:00

Numerical Research on the Mixing Mechanism of Lobed Mixer With New De-Swirling Structure GT2016-58120 Zhijun Lei, Jianbo Gong, Yanfeng Zhang,

Shangmei Su, Chunyan Hu, Institute of Engi-neering Thermophysics, Chinese Academy of Sciences, Beijing, China

Optimal Arrangement of the Film Cooling Holes Considering the Manufacturing Tol-erance for High Pressure Turbine Nozzle GT2016-57973 Sanga Lee, Dong-Ho Rhee, Kwanjung Yee,

60 | ASME 2016 TURBO EXPO

TUESDAY, JUNE 14 9:00 - 10:30 AM

AIRCRAFT ENGINE COMBUSTION, FUELS & EMISSIONS

COMBUSTION, FUELS & EMISSIONS

Conceptual Design and Optimization Chemical Kinetics Combustion Noise

Paper Session • Room E4 • TA-1-11 Paper Session • Room E3 • TA-4-13 Paper Session • Room 317C • TA-4-14

Session Chair: Harald Funke, FH Aachen University of Applied SciencesSession Co-Chair: Wilfried Visser, Delft University of TechnologyOscar Kogenhop, National Aerospace Laboratory NLR

Session Chair: Subith Vasu, University of Central FloridaSession Co-Chair: Chitralkumar Naik, AN-SYS Inc.

Session Chair: Thomas Sattelmayer, Tech-nical Univ Munich, GarchingSession Co-Chair: Moritz Schulze, Tech-nische Universitaet Muenchen

9:00

Optimizing Separate Exhaust Turbo-fans for Cruise Specific Fuel Consump-tion GT2016-57724 Syed Khalid, Gas Turbine Systems Solutions,

LLC, Palm Beach Gardens, FL, United States

Evaluation of Kinetic Mechanisms for Di-rect Fired Supercritical Oxy-Combustion of Natural Gas GT2016-56658 Shane Coogan, Southwest Research Institute,

San Antonio, TX, United States, Xiang Gao, Geor-gia Institute of Technology, Atlanta, GA, United States, Aaron McClung, Southwest Research In-stitute, San Antonio, TX, United States, Wenting Sun, Georgia Institute of Technology, Atlanta, GA, United States

Broadband Combustion Noise Simulation of the PRECCINSTA Burner Based on Sto-chastic Sound Sources GT2016-56124 Felix Grimm, German Aerospace Center (DLR),

Stuttgart, Germany, Duncan Ohno, German Aerospace Center / University of Stuttgart, Stutt-gart, Germany, Roland Ewert, Juergen Dierke, German Aerospace Center (DLR), Braunschweig, Germany, Berthold Noll, DLR, Stuttgart, Germa-ny, Manfred Aigner, German Aerospace Cen-ter (DLR), Institute of Combustion Technology, Stuttgart, Germany

9:30

Preliminary Design and Performance of Counter Rotating Turbines for Open Ro-tors: Part I: 1-D Methodology GT2016-57918 Pablo Bellocq, TOTAL, Pau, France, Iñaki

Garmendia, Mechanical Engineering Depart-ment, University of the Basque Country UPV/EHU, San Sebastián, Gipuzcoa, Spain, Jordane Legrand, Solar Turbines, Gosselies, Belgium, Vishal Sethi, Cranfield University, Cranfield, United Kingdom

Chemical Kinetic Models for Enhancing Gas Turbine Flexibility: Model Validationand Application GT2016-57223 Felix Guethe, General Electric Power, CH-5401

Baden, Switzerland, Martin Gassner, Stefano Bernero, Thiemo Meeuwissen, Torsten Wind, GE Power, Baden, Switzerland

Analysis of Combustion Noise Using Lo-cally Resolved Density Fluctuations and a Microphone Array GT2016-57490 Johannes Peterleithner, Stefan Zerobin, Jakob

Woisetschlaeger, Graz University of Technology, Graz, Austria

10:0

0

Preliminary Design and Performance of Counter Rotating Turbines for Open Rotors: Part II: D Methodology and Case Study for a 160 PAX Aircraft GT2016-57921 Pablo Bellocq, TOTAL, Pau, France, Iñaki

Garmendia, Mechanical Engineering Depart-ment, University of the Basque Country UPV/EHU, San Sebastián, Gipuzcoa, Spain, Jordane Legrand, Solar Turbines, Gosselies, Belgium, Vishal Sethi, Cranfield University, Cranfield, United Kingdom

A Kinetics Model For The Shockless Explo-sion Combustion GT2016-57678 Phillip Berndt, Freie Universität Berlin, 14195, Ger-

many, Rupert Klein, Freie Universität Berlin, Ber-lin, Germany, Christian Oliver Paschereit, Chair of Fluid Dynamics, Hermann-Föttinger-Institut, TU Berlin, Berlin, Germany

Experimental and Numerical Investiga-tion of Direct and Indirect Combustion Noise Contributions in a Lean Premixed Laboratory Swirled Combustor GT2016-57848 Nancy Kings, Wenjie Tao, Philippe Scouflaire,

EM2C, CNRS and CentraleSupelec, Chatenay Ma-labry, France, Franck Richecoeur, EM2C, CNRS and CentraleSupelec, Chatenay-Malabry, France, Sebastien Ducruix, CNRS & CentraleSupelec, Chatenay Malabry, France

FINAL PROGRAM | 61

TUESDAY, JUNE 14 9:00 - 10:30 AM

CONTROLS, DIAGNOSTICS & INSTRUMENTATION CYCLE INNOVATIONS HEAT TRANSFER: CONJUGATE

HEAT TRANSFER

Artificial Intelligence and Neural Network Diagnostic

ApproachesFuel Cell Driven Cycles Conjugate Analyses of Cooled

Airfoils

Paper Session • Room 308B • TA-5-6 Paper Session • Room 317A • TA-6-1 Paper Session • Room 301 • TA-10-1

Session Organizer: Pierre Dewallef, Uni-versity of LiegeSession Co-Organizer: Syed Khalid, Gas Turbine Systems Solutions, LLC

Session Chair: Mario Luigi Ferrari, Universi-ty of GenoaSession Co-Chair: Lawrence Shadle, Nation-al Energy Technology Laboratory - U.S. DOE

Session Organizer: Atul Kohli, Pratt & Whit-ney, TollandSession Co-Organizer: Sung in Kim, Queen’s University Belfast

9:00

Application of Artificial Neural Net-works for Misfiring Detection in an Annular Pulsed Detonation Combustor Mockup GT2016-56007 Sascha Wolff, Technische Universitaet Ber-

lin, Berlin, Germany, Jan Schaepel, Chair of Measurement and Control, Berlin, Germany, Rudibert King, Technische Universität Berlin, Berlin, Germany

Study on Nonlinear Identification SOFC Temperature Model Based on Particle Swarm Optimization-Least Squares Sup-port Vector Regression GT2016-56236 Jinwei Chen, Shanghai Jiao Tong University,

Shanghai, China, Huisheng Zhang, Shanghai Jiao Tong Univ, Shanghai, China, Shilie Weng, Shang-hai Jiao Tong University, Shanghai, China

Conjugate Heat Transfer Simulation of the Intercooled Compressor Vanes Based on Discontinuous Galerkin Method GT2016-56930 Longgang Liu, Chunwei Gu, Xiaodong Ren, Tsin-

ghua University, Beijing, China

9:30

Power Setting Sensor Fault Detection and Accommodation for Gas Turbine En-gines Using Artificial Neural Networks GT2016-56304 Yiguang Li, Cranfield University, Bedford

Mk43 0al, United Kingdom, Adrien Courdier, Cranfield University, Cranfield, Bedfordshire, United Kingdom

Dynamic Analysis of a Recuperated GT Cy-cle for Fuel Cell Hybrid Systems GT2016-57312 Luca Larosa, University of Genoa, Genoa, Italy,

Alberto Traverso, Univ Of Genova, Genova 16145, Italy, Aristide Massardo, Univ Of Genoa, Genova, Italy

Multi-Disciplinary Analyses for the Design of a High Pressure Turbine Blade Tip GT2016-57794 Stefano Caloni, Rolls-Royce plc, Derby, United

Kingdom, Shahrokh Shahpar, Rolls-Royce plc., Derby, United Kingdom

10:0

0

Rotating Machinery Monitoring and Fault Diagnosis With Neural Network Enhanced Fuzzy Logic Expert System GT2016-58102 Xiaojun Li, Alan Palazzolo, Texas A&m

University, COLLEGE STATION, TX, United States, Zhiyang Wang, Calnetix Technology, Cerritos, CA, United States

Experimental Investigation of a SOFC/MGT Hybrid Power Plant Test Rig: Impact and Characterization of a Fuel Cell Emula-tor GT2016-57747 Martina Hohloch, German Aerospace Center,

Stuttgart, Germany, Andreas Huber, DLR, Stutt-gart, Germany, Manfred Aigner, German Aero-space Center (DLR), Institute of Combustion Tech-nology, Stuttgart, Germany

Conjugate Heat Transfer Analysis for Gas Turbine Film-Cooled Blade GT2016-56688 Kuo-san Ho, Honeywell, phoenix, AZ, United

States, Jong-shang Liu, Honeywell Internation-al, Phoenix, AZ, United States, Thomas Elliott, Honeywell international, Chandler, AZ, United States, bruno Aguilar, Honeywell international, phoenix, AZ, United States

62 | ASME 2016 TURBO EXPO

TUESDAY, JUNE 14 9:00 - 10:30 AM

HEAT TRANSFER: NUMERI-CAL INTERNAL COOLING

HEAT TRANSFER: NUMERICAL FILM COOLING

MANUFACTURING MATERIALS & METALLURGY

Numerical Internal Cooling: Multi-Phase Flow Numerical Film Cooling I

Development and Performance of TBC and Advanced Coating

Systems

Paper Session • Room 307A • TA-11-5 Paper Session • Room 307B • TA-12-1 Paper Session • Room 318A • TA-21-2

Session Organizer: Paolo Venturini, Di-partimento di Meccanica e Aeronautica, ‘SapienzaSession Co-Organizer: Danesh Tafti, Vig-inia Tech

Session Chair: Ardeshir Riahi, HoneywellSession Co-Chair: Giovanna Barigozzi, Uni-versita’ Di Bergamo

Session Chair: Jeff Smith, Material Processing Technology, LLCSession Co-Chair: Tania Bhatia Kashyap, Unit-ed Technologies Research CenterLaurent Cretegny, General Electric

9:00

Numerical Investigation on Flow and Heat Transfer Characteristics of Steam and Mist/Steam in Internal Cooling Channels With Different Rib Angles GT2016-56812 Junxiong zeng, Xi’an Jiaotong University,

Xi’an, Shaanxi, China, Tieyu Gao, Xian Ji-aotong University, Xian, Shaanxi, China, Jun Li, Institute of Turbomachinery, Xi’an Jiaotong Univ., Xi’an, Shaanxi, China, Jiang-nan Zhu, Xi’An Jiaotong University, Xi’an, Shaanxi, China, Jiyou Fei, Dalian jiaotong university, Dalian, China

Uncertainty Analysis and Data-Driven Model Advances for a Jet-in-Crossflow GT2016-56191 Julia Ling, Anthony Ruiz, Sandia National Labs,

Livermore, CA, United States, Guilhem Laca-ze, Sandia National Lab, Livermore, CA, United States, Joseph Oefelein, Sandia National Labora-tories, Livermore, CA, United States

Development of Advanced Thermal Barri-er Coatings With Improved Temperature Capability GT2016-57425 Gregoire Witz, GE Power, Baden, Aargau, Swit-

zerland, Markus Schaudinn, General Electric (Switzerland) GmbH, Baden, Switzerland, Joerg Sopka, GE Power AG, Mannheim, Germany, To-bias Buecklers, General Electric (Switzerland) GmbH, Birr, Switzerland

9:30

A Simple Physics-Based Model for Par-ticle Rebound and Deposition in Tur-bomachinery GT2016-56697 Jeffrey Bons, Ohio State Univ, Columbus, OH,

United States, Robin Prenter, The Ohio State University, Columbus, OH, United States, Ste-ven Whitaker, Ohio State University, Colum-bus, OH, United States

Numerical Simulations on the Leading Edge Film Cooling With Counter-Inclined Film-Hole Row GT2016-56091 Dan Zhao, Cunliang Liu, Northwestern Polytech-

nical University, Xi’an, China, Yingni Zhai, Xi'an University of Architecture & Technology, Xi’an, China, Hui-ren Zhu, Northwestern Polytechnical University, Xi’an, China

Advanced High Temperature Erosion Tunnel for Testing TBC and New Turbine Blade Materials GT2016-57922 Dongyun Shin, Awatef Hamed, University of Cin-

cinnati, Cincinnati, OH, United States

10:0

0

Effects of Film Hole Exit Radiusing on Film Cooling Performance GT2016-56185 Antar Abdala, Helwan University, Faculty of

Engineering, cairo, Egypt, Fifi Elwekeel, Helwan University,Faculty of industrial Education, cairo, Egypt, Qun Zheng, Harbin Engineering Universi-ty, Harbin/Heilongjiang, China

Prediction of Turbo Air Classifier Cut Size Based on Particle Trajectory GT2016-57903 Yuan Yu, Beijing University of Chemical Tech-

nology, Beijing, China, Alexandrina Untaroiu, Virginia Tech, Blacksburg, VA, United States, Mehdi Saadat, Benjamin Thomas, University of Virginia, Charlottesville, VA, United States, Hous-ton Wood, Univ Of Virginia, Charlottesville, VA, United States

FINAL PROGRAM | 63

TUESDAY, JUNE 14 9:00 - 10:30 AM

MICROTURBINES, TURBOCHARGERS & SMALL

TURBOMACHINESOIL & GAS APPLICATIONS STEAM TURBINES

Turbochargers - Bearing sys-tems & Rotordynamics

High Pressure Compression for Injection, EOR and CO2 storage LSB Vibrational Aspects II

Paper Session • Room 308C • TA-23-8 Panel Session • Room 401 • TA-24-16 Paper Session • Room E2 • TA-26-11

Session Chair: Keun Ryu, Hanyang Uni-versitySession Co-Chair: Thomas Chirathadam, Southwest Research Institute

Session Chair: Manoj Gupta, Dresser-Rand- A Siemens Business

Session Chair: Paul Petrie Repar, KTH Swe-denSession Co-Chair: Robert Kielb, Duke Uni-versity

9:00

Oil-Free Automotive Turbochargers: Drag Friction and On-Engine Perfor-mance Comparisons to Oil-Lubricated Commercial Turbochargers GT2016-57855 Keun Ryu, Hanyang University, Ansan, Gyeo-

nggi-do, Korea (Republic), Zachary Ashton, BorgWarner Turbo Systems, Arden, NC, Unit-ed States

Challenges of CO2 Compression for CCS and SCO2 Brayton Cycles GT2016-58344 Jeff Moore, Southwest Research Institute, San An-

tonio, TX, United States

Unsteady Force on Multi-Stage and Multi-Passage Turbine Long Blade Rows Induced by Wet-Steam Flows GT2016-56360 Hironori Miyazawa, Takashi Furusawa, To-

hoku University, Sendai, Japan, Satoru Yama-moto, Tohoku Univ, Sendai 980-8579, Japan, Ya-suhiro Sasao, Mitsubishi Hitachi Power Systems, Takasagyo, Japan, Hiroharu Ooyama, MHPS LTD, kanagawa, Japan

9:30

“A Rotordynamic, Thermal, and Thrust Load Performance Gas Bearing Test Rig and Test Results for Tilting Pad Journal Bearings and Spiral Groove Thrust Bear-ings” GT2016-57665 Aaron Rimpel, Southwest Research Institute,

San Antonio, TX, United States, Giuseppe Vannini, GE, Italy, Jongsoo Kim, Waukesha Bearings Corporation, Pewaukee, WI, United States

High Pressure Centrifugal Compression Challenges in Injection, EOR and CCS GT2016-58345 Manoj Gupta, Dresser-Rand- A Siemens Business,

Kuala Lumpur, Malaysia

The Influence of Non-Equilibrium Wet Steam Effects on the Aeroelastic Proper-ties of a Turbine Blade Row GT2016-57899 Christopher Fuhrer, ITSM, Stuttgart, Germany,

Marius Gruebel, ITSM University of Stuttgart, Stuttgart, Germany, Paul Petrie Repar, KTH Sweden, Stockholm, Sweden, Damian Vogt, Uni-versity of Stuttgart, Stuttgart, Germany

10:0

0

On the Influence of Thrust Bearings on the Nonlinear Rotor Vibrations of Tur-bochargers GT2016-58168 Ioannis Chatzisavvas, TU Darmstadt, Darm-

stadt, Deutschland, Germany, Aydin Boyaci, Technical University Darmstadt, Darmstadt, Germany, Andreas Lehn, Technical University of Darmstadt, Darmstadt, Germany, Marcel Mahner, TU Darmstadt, Darmstadt, Deutsch-land, Germany, Panagiotis Koutsovasilis, BorgWarner Turbo Systems Engineering GmbH, Kirchheimbolanden, Germany, Bern-hard Schweizer, TU Darmstadt, Darmstadt, Germany

64 | ASME 2016 TURBO EXPO

TUESDAY, JUNE 14 9:00 - 10:30 AM

STRUCTURES & DYNAMICS: FATIGUE, FRACTURE & LIFE

PREDICTION

STRUCTURES & DYNAMICS: ROTORDYNAMICS

STRUCTURES & DYNAMICS: STRUCTURAL MECHANICS,

VIBRATION & DAMPING

Integrity of Engine Components

Rotordynamic Testing and Balancing

Mistuning of Blisks and Bladed Disks I

Paper Session • Room 300 • TA-28-1 Paper Session • Room 307C • TA-30-4 Paper Session • Room 308A • TA-32-1

Session Chair: Mauro Macciò, Ansaldo Sviluppo Energia (ASEN)Session Co-Chair: Bjorn Sjodin, Siemens Industrial Turbomachinery AB

Session Chair: Lorenzo Naldi, GE Session Co-Chair: Mateusz Golebiowski, Alstom

Session Chair: Bernd Beirow, Brandenburg University of Technology Cottbus,Session Co-Chair: Evgeny Petrov, Sussex University

9:00

"Calculated Forecast of Cyclic Life for GTE Disks, Manufactured From Titani-um Alloy Before and After Crack Initia-tion” GT2016-56249 Denis Slobodskoy, Aleksandr Pakhomen-

kov, Rustam Azimov, NPO SATURN, Rybinsk, Yaroslavi Region, Russia

Experimental Study on Frequency Band of Dynamic Vibration Absorber in Pipe Sys-tems GT2016-56952 Xiufeng Yang, Lidong He, Beijing University of

Chemical Technology, Beijing, China, Bingkang ZHANG, Institute of Engineering Thermophys-ics, Chinese Academy of Sciences, Beijing, Beijing, China

Influence of the Inter-Stage Coupling Flex-ibility on the Dynamics of Multi-Stage Ro-tors GT2016-57212 Florence Nyssen, University of Liege, Liege, Bel-

gium, Jean-Claude Golinval, Univ of Liege, Liege, Belgium

9:30

Mechanical Behavior Study of Steam Turbine Casing Bolts Under In-Service Conditions GT2016-56723 Nailong Zhao, Weizhe Wang, Hui Hong,

RICHARD AMANKWA ADJEI, Yingzheng Liu, Shanghai Jiao Tong University, Shang-hai, China

Dynamic Characteristics of Rotor System With Additional Constraint due to Rub-Im-pact GT2016-56942 Jie Hong, Pingchao Yu, Dayi Zhang, Beihang

University, Beijing, China, Zhichao Liang, 405 Research group, Beihang University, Beijing, Chi-na, Qicheng Zhang, Beihang University, Beijing, China

Sensitivity Analysis of High-Frequency Forced Response for Mistuned Bladed Discs Based on High-Fidelity Models GT2016-57690 Yuanqiu Tan, Chaoping Zang, Yongliang Duan,

Nanjing University of Aeronautics and Astro-nautics, Nanjing, China, Evgeny Petrov, Sussex University, Brighton, United Kingdom, Biao Zhou, njing University of Aeronautics and Astro-nautics , Nanjing University of Aeronautics and Astronautics , Nanjing University of Aeronautics and Astronautics , Nanjing University of Aero-nautics and Astro, Nanjing, China

10:0

0

Influence of Temperature and Pressure Fluctuations on the Mechanical Behav-ior of a Seal Structure in Steam Valve Under In-Service Conditions GT2016-56753 Hui Hong, Weizhe Wang, Nailong Zhao,

Zhenwei Cai, Yingzheng Liu, Shanghai Jiao Tong University, Shanghai, China

Suppression of Subsynchronous Vibra-tions in a 11 MW Steam Turbine Using In-tegral Squeeze Film Damper Technology at the Exhaust Side Bearing GT2016-57410 Riccardo Ferraro, Michael Catanzaro, GE Oil&-

Gas, Florence, Italy, Jongsoo Kim, Waukesha Bearings Corporation, Pewaukee, WI, United States, Michela Massini, Waukesha Bearings Cor-poration, Rickmansworth, Hertfordshire, United Kingdom, Davide Betti, GE Oil&Gas, Florence, Ita-ly, Richard J. Livermore-Hardy, Waukesha Bear-ings Corporation, Rickmansworth, Hertfordshire, United Kingdom

Forced Response Analysis of a Mistuned Compressor Blisk Comparing Three Differ-ent Reduced Order Model Approaches GT2016-57902 Mauricio Gutierrez Salas, KTH Royal Institute

of Technology, Sweden, Stockholm, Sweden, Ron-nie Bladh, Siemens Ind Turbomachinery AB, Fin-spong, Sweden, Paul Petrie Repar, KTH Sweden, Stockholm, Sweden, Damian Vogt, University of Stuttgart, Stuttgart, Germany, Hans Mårtens-son, GKN Aerospace, Trollhattan, Sweden, Tor-sten Fransson, KTH, Heat and Power Technolo-gy, Stockholm, Sweden

FINAL PROGRAM | 65

TUESDAY, JUNE 14 9:00 - 10:30 AM

STUDENT ADVISORY SUPERCRITICAL CO2 POWER CYCLES

TURBOMACHINERY: AXIAL FLOW FAN & COMPRESSOR

AERODYNAMICS

The Art of the Peer Review Process: Best Practices for Crafting and Responding to

Paper Reviews

sCO2 Turbines and Seals Real Hardware and Atypical Flow Conditions

Tutorial Session • Room E6 • TA-35-2 Paper Session • Room 317B • TA-36-3 Paper Session • Room 318B • TA-37-6

Session Chair: Bernd Prade, Siemens AG Power & GasSession Co-Chair: Gilles Bourque, RRC

Session Chair: Jeff Moore, Southwest Re-search Institute

Session Chair: Mark Celestina, NASA GRC

9:00 T

U

T

O

R

I

A

L

S-CO2 Turbine Design for Decay Heat Re-moval System of Sodium Cooled Fast Reac-tor GT2016-56532 Seong Kuk Cho, JEKYOUNG LEE, KAIST, Dae-

jeon, N/A, Korea (Republic), Jeong-Ik Lee, Korea Advanced Institute of Science and Technology (KAIST), Daejeon, Korea (Republic), Jae Eun Cha, KAERI, Daejeon-City, Korea (Republic)

Design of Experiments and Numerical Simulation of Deteriorated High Pressure Compressor Airfoils GT2016-56024 Gerald Reitz, Institut für Flugantriebe und

Strömungsmaschinen, Braunschweig, Germany, Stephan Schlange, Jens Friedrichs, TU Braun-schweig Inst of Aircraft Propulsion & Turboma-chinery, Braunschweig, Germany

9:30

Performance of Supercritical CO2 Dry Gas Seals Near the Critical Point GT2016-56537 Mohd Fairuz Zakariya, The University of

Queensland, St. Lucia, Queensland, Australia, Ingo Jahn, The University of Queensland, QLD, Queensland, Australia

Numerical Simulation of Particulates in Multi-Stage Axial Compressors GT2016-57917 Swati Saxena, GE Global Research, Niskayuna,

NY, United States, Giridhar Jothiprasad, Corey Bourassa, GE Global Research Center, Niskayu-na, NY, United States, Byron Pritchard, GE Avia-tion, Evandale, OH, United States

10:0

0

Coupled Physics Performance Predictions and Risk Assessment for Dry Gas Seal Op-erating in MW-Scale Supercritical CO2 Tur-bine GT2016-57670 Azam Thatte, GE, Niskayuna, NY, United States,

Voramon Dheeradhada, GE Global Research, Ni-skayuna, NY, United States

Effect of Ice and Blade Interaction Models on Compressor Stability GT2016-57797 Swati Saxena, GE Global Research, Niskayu-

na, NY, United States, George Woo, Rajkeshar Singh, GE Global Research Center, Niskayuna, NY, United States, Andrew Breeze-Stringfellow, GE Aviation, Cincinnati, OH, United States, Tsu-guji Nakano, Peter Szucs, GE Aviation, Evandale, OH, United States

66 | ASME 2016 TURBO EXPO

TUESDAY, JUNE 14 9:00 - 10:30 AM

TURBOMACHINERY: AXIAL FLOW TURBINE

AERODYNAMICS

TURBOMACHINERY: DESIGN METHODS & CFD MODELING FOR

TURBOMACHINERY

TURBOMACHINERY: DESIGN METHODS & CFD MODELING

FOR TURBOMACHINERY

Low Pressure Turbine Aerodynamics II

Optimization Methods and Applications

Comparative Analysis and Uncertainty Quantification

Paper Session • Room 318C • TA-38-7 Paper Session • Room 403 •TA-39-1 Paper Session • Room 403 • TA-39-12

Session Chair: Roberto Pacciani, Univer-sity Of FlorenceSession Co-Chair: Jonathan Ong, GE, Gar-ching

Session Chair: Marcus Meyer, Rolls-Royce DeutschlandSession Co-Chair: Christoph Starke, Sie-mens AG

Session Chair: Michel van Rooij, Nether-lands Aerospace Centre NLR

9:00

Aerodynamic Loading Distribution Effects on Off-Design Performance of Highly Loaded LP Turbine Cascades Under Steady and Unsteady Incoming Flows GT2016-57580 Daniele Simoni, University of Genova, Genova,

Italy, Pietro Zunino, Marina Ubaldi, Univer-sità di Genova, Genova, Italy, Marco Berrino, University of Genova, Genova, Italy, Frances-co Bertini, GE AvioAero, Rivalta di Torino, Italy

Gradient-Based Adjoint and Design of Ex-periment CFD Methodologies to Improve the Manufacturability of High Pressure Turbine Blades GT2016-56042 Giulio Zamboni, Gabriel Banks, Simon Bather,

Rolls-Royce plc, Derby, United Kingdom

Calculation of Film-Cooling Effectiveness and Aerodynamic Losses Using DES/SAS and RANS Methods and Compared With Experimental Results GT2016-57084 Xiao-Chun Lin, Institute of Engineering Thermo-

physics, Chinese Academy of Sciences, Beijing, China, Jian-Jun Liu, Institute of Engineering Thermophysics, Beijing, China, Baitao An, In-stitute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing, China

9:30

Investigations of the Actuation Effect of a Single DBD Plasma Actuator for Flow Separation Control Under Simulated Low-Pressure Turbine Blade Conditions GT2016-57432 Elisa Pescini, Fedele Marra, University of

Salento, Lecce, Lecce (Puglia), Italy, Maria Grazia De Giorgi, University of Salento Dip. Di Ing. Inno, Lecce, Italy, Luca Francioso, CNR-IMM, Lecce, Italy, Antonio Ficarella, Universi-ty of Salento, Lecce, Italy

Adjoint Response Surface Method in Aero-dynamic Shape Optimization of Turboma-chinery Blades GT2016-56170 Xiao Tang, Jiaqi Luo, Peking University, Beijing,

China, Feng Liu, University Of California Irvine, Irvine, CA, United States

“Spanwise Spectra, Reynolds Stresses and Correlations From DNS of Turbine Like APG Boundary Layers” GT2016-57906 Mark P. Simens, Universidad Politecnica de Ma-

drid, Madrid, Spain, Ayse G. Gungor, Istanbul Technical University, Istanbul, Turkey

10:0

0

Experimental and Numerical Verifica-tion of the Core-Flow in a New Low-Pres-sure Turbine GT2016-57101 Michael Henke, Leibniz Universitaet Han-

nover, Hannover, Germany, Lars Wein, Gottfried Wilhelm Leibniz Universitaet, Ha-nover, Germany, Tim Kluge, Marc Heinz-Otto Biester, Leibniz Universität Hannover, Han-nover, Germany, Yavuz Guendogdu, MTU, Munich, Germany, Joerg Seume, Gottfried Wilhelm Leibniz Universitaet, Hannover, Ger-many

Aerodynamic Design Optimization of the Last Stage of a Multi-Stage Compressor by Using an Adjoint Method GT2016-56893 Jing Yang, Pekin University, Beijing, China, Jiaqi

Luo, Peking University, Beijing, China, Juntao Xiong, Feng Liu, University of California Irvine, Irvine, CA, United States

UNCERTAINTY QUANTIFICATION IN TURBOMACHINERY SIMULATIONS GT2016-56798 Gianluca Iaccarino, Stanford University, Stan-

ford, CA, United States, Michael Emory, Cascade Technologies, Palo Alto, CA, United States, Greg-ory Laskowski, GE Aviation, Lynn, MA, United States

FINAL PROGRAM | 67

TUESDAY, JUNE 14 9:00 - 10:30 AM

TURBOMACHINERY: UNSTEADY FLOWS IN

TURBOMACHINERYWIND ENERGY

Unsteady Flows in Compressors III

Environmental Issues in Turbomachinery

Paper Session • Room 327 • TA-44-6 Tutorial Session • Room 402 • TA-46-12

Session Chair: Kenneth Sudar, NASA Glenn Research CenterSession Co-Chair: William J. Gooding, Purdue University

Session Chair: Aya Diab, Faculty of Engi-neering - Ain Shams UniversitySession Co-Chair: Ricardo Martinez-Botas, Imperial College LondonAndrew Nix, West Virginia University

9:00

Development and Evaluation of a Per-formance Estimation Methodology for Fans Operating Within Non-Homoge-neous Inflow GT2016-57095 Dirk Schoenweitz, German Aerospace Center

(DLR), Cologne, Germany, Rainer Schnell, Ger-man Aerospace Center (DLR), Koeln, Germany

T

U

T

O

R

I

A

L

9:30

Numerical and Experimental Studies of Reynolds Number and Stator Clocking Effect on Performance of a High-Loaded Two-Stage Compressor With 3.7 Total Pressure Ratio GT2016-56567 Victor Mileshin, Nikolay Savin, Pavel Kozhe-

myako, Iaroslav DRUZHININ, Central Insti-tute of Aviation Motors, Moscow, Russia

10:0

0

Near Stall Behavior of a Transonic Com-pressor Rotor With Casing Treatment GT2016-56606 Christoph Brandstetter, Technische Univ-

eristät Darmstadt, Darmstadt, Hessen, Ger-many, Sina Stapelfeldt, Rolls-Royce-Germany, Blankenfelde-Mahlow, Germany, Mehdi Vah-dati, Imperial College London, London, Unit-ed Kingdom, Felix Holzinger, Heinz-Peter Schiffer, Technische Universität Darmstadt, Darmstadt, Germany

68 | ASME 2016 TURBO EXPO

TUESDAY, JUNE 14 10:45AM - 12:45 PM

AIRCRAFT ENGINE COAL, BIOMASS & ALTERNATIVE FUELS

COMBUSTION, FUELS & EMISSIONS

Transient Engine Simulation - Its Role in Design and

DevelopmentNovel Aviation Fuels Atomization & Sprays I

Tutorial Session • Room E6 • TB-1-2 Paper Session • Room 308B • TB-3-2 Paper Session • Room E3 • TB-4-2

Session Chair: Syed Khalid, Gas Turbine Systems Solutions, LLC

Session Chair: Subith Vasu, University of Central FloridaSession Co-Chair: Ajay Agrawal, University of Alabama

Session Chair: Wajid Chishty, NRC Insti-tute for Aerospace ResearchSession Co-Chair: Scott Drennan, Conver-gent Science, Inc.

10:4

5

T

U

T

O

R

I

A

L

Experimental and Modeling Study of the Combustion of Synthetic Jet Fuels: Napht-enic Cut and Blend with a GtL Jet Fuel GT2016-56086 Philippe Dagaut, CNRS-INSIS, Orleans, US & Can-

ada only, France, Pascal Diévart, CNRS-INSIS, Orleans, US & Canada only, France

Computation of Liquid Fuel Atomization and Mixing by Means of the SPH Method: Application to a Jet Engine Fuel Nozzle GT2016-56023 Thilo F. Dauch, Samuel Braun, Lars Wieth, Geof-

froy Chaussonnet, Marc Keller, Institut fuer Thermische Stroemungsmaschinen (ITS) - Karl-sruher Institut fuer Technologie (KIT), Karlsruhe, Germany, Rainer Koch, Karlsruhe Institut of Technology (KIT), Karlsruhe, Germany, Hans-Jorg Bauer, KIT - Institute for Thermal Turboma-chinery (ITS), Karlsruhe, BW, Germany

11:1

5

Influence of Nanoparticles on Spray Per-formance of Alternative Jet Fuels GT2016-57778 Kumaran Kannaiyan, Texas A&M University at

Qatar, Doha, Qatar, Reza Sadr, Texas A&M Uni-versity at Qatar, College Station, TX, United States

Study of Development of a Novel Dual Phase Airblast Injector for Gas Turbine Combustor GT2016-56340 Jianing Li, Mahmoud Hamza, Arul Kumaran,

University of Cincinnati, Cincinnati, OH, Unit-ed States, Umesh Bhayaraju, univ of cincinnati, Cincinnati, OH, United States, San-Mou Jeng, University of Cincinnati, Cincinnati, OH, United States

11:4

5

A Study on the Emissions of Alternative Aviation Fuels GT2016-57361 Marina Braun-Unkhoff, German Aerospace Cen-

ter (DLR), Stuttgart, Germany, Sebastian Riebl, DLR, Stuttgart, Germany, Uwe Riedel, German Aerospace Center, Institute of Combustion Tech-nology, Stuttgart, Germany

Effect of Aromatics in Jet Fuels on Spray Characteristics Downstream of an Aero-nautical Pressure Swirl Atomizer GT2016-56565 Julien Leparoux, Safran Snecma Villaroche,

Moissy Cramayel, France, Renaud Lecourt, ONERA, MAUZAC, France, Olivier Penanhoat, Safran Snecma Villaroche, Moissy Cramayel, France

12:15

Testing of Synthesized Aromatic Kerosene (SAK) Aviation Fuel Blends at Simulated Altitudes GT2016-57570 Pervez Canteenwalla, Craig R. Davison, Wajid A.

Chishty, National Research Council Canada, Ot-tawa, ON, Canada, Cynthia Ginestra, Shell Global Solutions, Houston, TX, United States, Brice Dally, Virent, Madison, WI, United States

Spray Characteristics Measured in a New Flox® Based Low Emission Combustor for Liquid Fuels Using Laser and Optical Diag-nostics GT2016-56629 James D. Gounder, Anton Zizin, German Aero-

space Center, Stuttgart, Germany, Oliver Lam-mel, German Aerospace Center (DLR), Stuttgart, Germany, Manfred Aigner, German Aerospace Center (DLR), Institute of Combustion Technolo-gy, Stuttgart, Germany

FINAL PROGRAM | 69

TUESDAY, JUNE 14 10:45AM - 12:45 PM

COMBUSTION, FUELS & EMISSIONS CYCLE INNOVATIONS HEAT TRANSFER: GENERAL

HEAT TRANSFER

Novel Combustion Concepts IIIntroduction to Thermodynamics for Gas Turbine Cycles and Cycle

SimulationBlade Tip Heat Transfer

Paper Session • Room 317C • TB-4-6 Tutorial Session • Room E5 • TB-6-11 Paper Session Type • Room 307A • TB-13-5

Session Chair: Bernd Prade, Siemens AG Power & GasSession Co-Chair: Gilles Bourque, RRC

Session Chair: Theoklis Nikolaidis, Cran-field University

Session Organizer: Jay Kapat, University of Central Florida (UCF)Session Co-Organizer: James P. Downs, Florida Turbine Technology, Inc.Session Co-Chair: Eric Ruggiero, GE Avia-tion

10:4

5

Shockless Explosion Combustion: Experi-mental Investigation of a New Approximate Constant Volume Combustion Process GT2016-57680 Thoralf Reichel, Technical University of

Berlin, Berlin, Germany, Bernhard Bobusch, TU Berlin, Berlin, Germany, Christian Oliver Paschereit, Chair of Fluid Dynamics, Her-mann-Föttinger-Institut, TU Berlin, Berlin, Germany, Jan Schaepel, Chair of Measure-ment and Control, Berlin, Germany, Rudibert King, Technische Universität Berlin, Berlin, Germany, Rupert Klein, Freie Universität Ber-lin, Berlin, Germany

Introduction To Thermodynamics For Gas Turbine Cycles And Cycle Simulation Tools GT2016-58313 Theoklis Nikolaidis, Cranfield University, Bed-

ford, United Kingdom

Numerical Investigation of the Blade Tip and Overtip Casing Aerothermal Perfor-mance in a High Pressure Turbine Stage GT2016-56709 Kun DU, Institute of Turbomachinery, Xi’an Ji-

aotong University, Xi’an, Shaanxi, China, ZHI-GANG LI, Xian JiaotongUniverity, Xian, China, Jun Li, Institute of Turbomachinery, Xi’an Ji-aotong Univ., Xi’an, Shaanxi, China

11:1

5

Thermodynamic Evaluation of Pulse Detonation Combustion for Gas Turbine Power Cycles GT2016-57813 Joshua Gray, Technical University of Berlin,

Berlin, Germany, Johann Vinkeloe, TU Berlin, Berlin, Germany, Phillip Berndt, Freie Uni-versität Berlin, 14195, Germany, Jonas Moeck, TU Berlin, Berlin, Berlin, Germany, Christian Oliver Paschereit, Chair of Fluid Dynamics, Hermann-Föttinger-Institut, TU Berlin, Berlin, Germany, Rupert Klein, Freie Universität Ber-lin, Berlin, Germany, Panagiotis Stathopou-los, TU Berlin, Berlin, Berlin, Germany

Heat Transfer of Winglet Tips in a Tran-sonic Turbine Cascade GT2016-56804 Fangpan Zhong, Chao Zhou, Peking University,

Beijing, China, Haiteng Ma, Shanghai Jiao Tong University, Shanghai, China, Qiang Zhang, City University London, London, United Kingdom

11:4

5

Flameless Oxidation Combustor Devel-opment for a Sequential Combustion Hybrid Turbofan Engine GT2016-58079 Yeshayhaou Levy, Technion, Haifa 32000,

Israel, Valery Sherbaum, Technion:- Israel In-stitute of Technology, Haifa, Israel, Vladimir Erenburg, Technion, Haifa, Israel, Igor Gais-sinski, Technion, Israel Institute of Technolo-gy, Haifa, Israel

Cooling Injection Effect on a Transonic Squealer Tip: Part 1: Experimental Heat Transfer Results and CFD Validation GT2016-57579 Haiteng Ma, Shanghai Jiao Tong University,

Shanghai, China, Qiang Zhang, City Univer-sity London, London, United Kingdom, Li He, University of Oxford, Oxford, United Kingdom, Zhaoguang Wang, Lipo Wang, Shanghai Jiao Tong University, Shanghai, China

12:15

Investigation of Air Injection and Cav-ity Size Within a Circumferential Com-bustor to Increase G-Load and Resi-dence Time GT2016-56216 Andrew E. Cottle, Marc Polanka, Air Force

Institute of Technology, WPAFB, OH, United States, Larry P. Goss, Innovative Scientific Solutions Inc., Dayton, OH, United States, Co-rey Z. Goss, Innovative Scientific Solutions, Inc, Dayton, OH, United States

Cooling Injection Effect on a Transonic Squealer Tip: Part 2: Analysis of Aerother-mal Interaction Physics GT2016-57587 Haiteng Ma, Shanghai Jiao Tong University,

Shanghai, China, Qiang Zhang, City Univer-sity London, London, United Kingdom, Li He, University of Oxford, Oxford, United Kingdom, Zhaoguang Wang, Lipo Wang, Shanghai Jiao Tong University, Shanghai, China

T

U

T

O

R

I

A

L

70 | ASME 2016 TURBO EXPO

TUESDAY, JUNE 14 10:45AM - 12:45 PM

HEAT TRANSFER: TUTORIALSHEAT TRANSFER:

EXPERIMENTAL INTERNAL COOLING

HEAT TRANSFER: EXPERIMENTAL FILM COOLING

Heat Transfer Tutorials I Experimental Internal Cooling: Rotating Rigs

Film Cooling Issues and Measurements

Tutorial Session • Room 301 • TB-14-1 Paper Session • Room 307B • TB-16-3 Paper Session • Room 318B • TB-19-2

Session Organizer: Andrew Nix, West Virginia University

Session Organizer: Michael Dunn, The Ohio State UniversitySession Co-Organizer: Om Sharma, United Technologies Research Center

Session Organizer: Savas Yavuzkurt, Dept. of Mech. and Nuc. Engr./Pennsylvania State UniversitySession Co-Chair: Marc Polanka, Air Force Institute of Technology

10:4

5

Two-Hour Tutorial: Key Concepts of Thermofluids in Turbomachinery Design GT2016-58108 Bijay K. Sultanian, Takaniki Communica-

tions, LLC, OVIEDO, FL, United States

Rotating Heat Transfer Measurements on a Multi-Pass Internal Cooling Channel: II Ex-perimental Tests GT2016-56307 Fabio Pagnacco, Luca Furlani, Alessandro Ar-

mellini, Luca Casarsa, University of Udine, Udine, Italy, Anthony Davis, Siemens Industrial Gas Tur-bines Ltd, Lincoln, United Kingdom

Dependence of Film Cooling Effectiveness on 3D Printed Cooling Holes GT2016-56698 Paul Aghasi, Ephraim Gutmark, David Munday,

University of Cincinnati, Cincinnati, OH, United States

11:1

5

Rotating Heat Transfer Measurments on a Multi-pass Internal Cooling Channel - I Rig Development GT2016-56308 Fabio Pagnacco, Luca Furlani, Alessandro Ar-

mellini, Luca Casarsa, University of Udine, Udine, Italy, Anthony Davis, Siemens Industrial Gas Tur-bines Ltd, Lincoln, United Kingdom

Effect of In-Hole Roughness on Film Cool-ing From a Shaped Hole GT2016-56978 Robert Schroeder, Sargent & Lundy, Wheaton, IL,

United States, Karen Thole, Pennsylvania State Univ, University Park, PA, United States

11:4

5

Heat Transfer Investigation in a Smooth Rotating Channel With Thermography Liq-uid Crystal GT2016-56413 Ruquan You, Haiwang Li, Zhi Tao, Kuan Wei, Bei-

hang University, Beijing, China

Experimentally Measured Effects of Inci-dence Angle on the Adiabatic and Overall Effectiveness of a Fully Cooled Turbine Airfoil With Showerhead Shaped Holes GT2016-57982 Kyle Chavez, University of Texas at Austin, Aus-

tin, TX, United States, Thomas Slavens, Pratt & Whitney, East Hartford, CT, United States, David Bogard, Univ Of Texas At Austin, Austin, TX, United States

12:15

Effect of Rotation on a Gas Turbine Blade Internal Cooling System: Experimental In-vestigation GT2016-57594 Daniele Massini, Unversity of Florence, Firen-

ze, Italy, Emanuele Burberi, Carlo Carcasci, Lorenzo Cocchi, Bruno Facchini, University of Florence, Florence, Italy, Alessandro Armellini, Luca Casarsa, Luca Furlani, University of Udine, Udine, Italy

Effects of Internal and Film Cooling on the Overall Effectiveness of a Fully Cooled Turbine Airfoil With Shaped Holes GT2016-57992 Kyle Chavez, University of Texas at Austin, Aus-

tin, TX, United States, Thomas Slavens, Pratt & Whitney, East Hartford, CT, United States, David Bogard, Univ Of Texas At Austin, Austin, TX, United States

T

U

T

O

R

I

A

L

FINAL PROGRAM | 71

TUESDAY, JUNE 14 10:45AM - 12:45 PM

INDUSTRIAL & COGENERATION

MANUFACTURING MATERIALS & METALLURGY

MICROTURBINES, TURBOCHARGERS & SMALL

TURBOMACHINES

Techno-Economic Analysis Metallurgy for Non-Metallurgists Turbochargers - Heat transfer & Systems

Paper Session • Room 318A • TB-20-4 Tutorial Session • Room 402 • TB-21-8 Paper Session • Room 308C • TB-23-6

Session Chair: Yiguang Li, Cranfield Uni-versitySession Co-Chair: Valentina Orlandini, University of BolognaFrancesco Melino, University of Bologna

Session Chair: Doug Nagy, Liburdi Turbine Services, Inc.

Session Chair: Hua Chen, National Labora-tory of Turbocharging Technology North China Eng Rsrch InstSession Co-Chair: Qingzhen Bi, Shanghai Jiao Tong University

10:4

5

Thermo-Economic Analysis of a Photo-voltaic-Fuel Cell Hybrid System With Energy Storage for CHP Production in Household Sector GT2016-56461 Francesco Melino, University of Bologna,

Bologna, Italy, Antonio Peretto, Michele Bi-anchi, University of Bologna, Bologna 40136, Italy, Andrea De Pascale, DIN - University Of Bologna, Bologna, Italy, Maria Alessandra Ancona, Lisa Branchini, University of Bolo-gna, Bologna, Italy

Basic Metallurgical Concepts and Strength-ening Mechanisms GT2016-58295 Maxine Watson, Quest Integrity Group LLC, Low-

er Hutt, OTHER, New Zealand

Thermomechanical Analysis of Transient Temperatures in a Radial Turbine Wheel GT2016-56328 Mathias Diefenthal, IKDG RWTH Aachen Uni-

versity, Aachen, Germany, Michael Hopfinger, Christian Rakut, IKDG, RWTH Aachen Univer-sity, Aachen, NRW, Germany, Manfred Wirsum, Rwth-Aachen University, Aachen, Germany, Tom Heuer, Borg Warner Turbo Systems Engineering Gmbh, Kirchheimbolanden, Germany

11:1

5

Micro Gas Turbine/Renewable Hybrid Power System for Distributed Genera-tion: Effects of Ambient Conditions on Control Strategy GT2016-57564 Ma Shixi, Shanghai Jiao Tong University,

Shanghai, Shanghai, China, Dengji Zhou, Huisheng Zhang, Shanghai Jiao Tong Univ, Shanghai, OO, China, Zhenhua Lu, Shanghai Jiao Tong University, Shanghai, China

Part 2: Metallurgical Processing I: Manu-facture by investment casting GT2016-58296 Mark Irwin, TPC Components AB, Hallstaham-

mar, Sweden

Numerical Investigation of a Novel Approach for Mitigation of Forced Response of a Variable Ge-ometry Turbine During Exhaust Braking Mode GT2016-56342 Ben Zhao, Beijing Institute of Technology, Bei-

jing, China, Liangjun Hu, Ford Motor Company, Dearborn, MI, United States, Harold Sun, Ford Motor Company, W Bloomfield, MI, United States, Ce Yang, Xin Shi, Beijing Institute of Technology, Beijing, China, James Yi, Ford Motor Company, Dearborn, MI, United States, Eric Curtis, Ford Motor Company, Milan, MI, United States, Abra-ham Engeda, Michigan State University, East Lansing, MI, United States

11:4

5

Thermo-Fluid Dynamic Analysis on the Compression Process of Liquid-Gas Two-Phase GT2016-57221 Abhay Mohan, Andong National University,

Andong Si, Gyeongsangbuk-do, Korea (Re-public), Palanikumar Chidambaram, FMTRC, Daejoo Machinery Co Ltd.,, Daegu, Korea (Republic), Abhilash Suryan, College of Engi-neering Trivandrum, Trivandrum, India, Heuy Dong Kim, Andong National University, An-dong-si, Gyeongsangbuk-do, Korea (Republic)

Part 3, Metallurgical Processing II: Coating GT2016-58297 Purusottam Sahoo, ASM, LLC, Houston, TX, Unit-

ed States

Heat Transfer Correction Methods for Turbocharger Performance Measure-ments GT2016-56770 Mario Schinnerl, Continental Automotive GmbH,

Regensburg, Germany, Joerg Seume, Gottfried Wilhelm Leibniz Universitaet, Hannover, Germa-ny, Jan Ehrhard, Continental Automotive GmbH, Gruenstadt, Germany, Mathias Bogner, Conti-nental Automotive GmbH, Regensburg, Germany

12:15

A Method to Evaluate the Heat Exchang-er Retrofit for Industrial Gas Turbines Based on Technical and Economic Per-spective GT2016-56145 WALEED ALBUSAIDI, Cranfield University,

Bedfordshire, Bedfordshire, United Kingdom, Pericles Pilidis, Cranfield University, Cran-field, United Kingdom

Part 4, Metallurgical Investigation: Dam-age mechanisms and failure analysis GT2016-58299 Doug Nagy, Liburdi Turbine Services, Inc., Dun-

das, ON, Canada

Analysis of Heat Transfer in a Radial Tur-bine Wheel of Turbochargers and Predic-tion of Heat Transfer Coefficients With an Empirical Method GT2016-57687 Christian Rakut, IKDG, RWTH Aachen Universi-

ty, Aachen, NRW, Germany, Mathias Diefenthal, IKDG RWTH Aachen University, Aachen, Germa-ny, Manfred Wirsum, Rwth-Aachen University, Aachen, Germany, Tom Heuer, Borg Warner Tur-bo Systems Engineering Gmbh, Kirchheimbolan-den, Germany

72 | ASME 2016 TURBO EXPO

TUESDAY, JUNE 14 10:45AM - 12:45 PM

OIL & GAS APPLICATIONS ORGANIC RANKINE CYCLE POWER SYSTEMS STEAM TURBINES

Aeroderivatives & Light Industrial Gas Turbine Engines:

Upgrades & UpdatesORC Power Systems Applications LSB Vibrational aspects I

Panel Session • Room 401 • TB-24-14 Paper Session • Room 317B • TB-25-1 Paper Session • Room E2 • TB-26-3

Session Chair: Patrick Campbell, GE Oil & Gas

Session Chair: Marco Astolfi, Politecnico di Milano

Session Chair: Paul Cooper, Alstom Power LimitedSession Co-Chair: Tadashi Tanuma, Teikyo University

10:4

5

MAN Diesel & Turbo SE Product over-view GT2016-58290 S.H. Wiers, Man Turbo Ag, Oberhausen, Ger-

many, Alexander Wiedermann, MAN Diesel & Turbo SE, Oberhausen, Germany

Installation and Performance Analysis of 125 kW Organic Rankine Cycle for Station-ary Fuel Cell Power Plant GT2016-56448 Kwanghak Huh, Daesung Hitech, Seoul, Korea

(Republic), Shamim Imani, Calnetix, Cerritos, CA, United States, Parsa Mirmobin, Calnetix Technol-ogies, Cerritos, CA, United States

CF Component Tests on Full-Scale Low Pressure Steam Turbine End Stage Blades GT2016-56988 Shilun Sheng, Siemens AG, Muelheim, Germany,

Johan Flegler, Siemens AG, Power and Gas Di-vision, Muelheim an der Ruhr, Germany, Balazs J. Becs, Siemens AG, Mülheim an der Ruhr, Ger-many, Michael Dankert, Siemens AG, Muelheim, Germany

11:1

5

Siemens Light Industrial & Aero Gas Turbine Overview GT2016-58293 Mike Welch, Siemens Energy Oil & Gas, Lin-

coln, United Kingdom

Radial Turboexpander Optimization Over Discretized Heavy-Duty Test Cycles for Mobile Organic Rankine Cycle Applications GT2016-56754 Miles Robertson, Aaron Costall, Peter Newton,

Imperial College London, London, United King-dom, Ricardo Martinez-Botas, Imperial College London, Middlesex, United Kingdom

Effects of Upstream Sprayed Water on Steam Flow Conditions and Blade Vibra-tions of a Low Pressure Steam Turbine GT2016-57954 Naoki Shibukawa, TOSHIBA CORPORATION,

Yokohama, OTHER, Japan, Yoshihiro Ishikawa, TOSHIBA Corp., Yokohama, OO, Japan, Yoshifu-mi Iwasaki, Toshiba Corporation, Yokohama, Japan, Kota Chiba, Tohiba Corporation, Yokoha-ma, Kanagawa, Japan

11:4

5

GE Aeroderivatives News GT2016-58289 Dave Wolf, OG-TMS Turbomachinery Solu-

tions, West Chester, OH, United States

Comparative Investigation on Waste Heat Driven Air Supply Systems for PEM Fuel Cells GT2016-57115 Lili YU, Weilin Zhuge, Yangjun Zhang, Jie Peng,

Tsinghua University, Beijing, Beijing, China

Alleviation of Rotating Pressure Oscilla-tions in the Last LP Turbine Stage During Low-Load Conditions GT2016-56088 Brian Haller, GE Power, Rugby, Warwickshire,

United Kingdom, Tim Rice, GE, Rugby, United Kingdom, Roland Sigg, GE - Steam Turbine Busi-ness, Baden, Switzerland

12:15

Solar turbine Product Line Update GT2016-58294 Rainer Kurz, Solar Turbines Incorporated,

San Diego, CA, United States

Electric Power Generation From Low-En-thalpy Heat Recovery in FPSOs Using Kali-na Cycle GT2016-56238 Carlos Eymel Campos Rordriguez, 3E Gestao

Energetica, Itajuba, MG, Brazil, Thiago Gotelip Correa Veloso, Universidade Federal de Itajuba, Itajuba, MG, Brazil, Cesar A. Rodriguez Soto-monte, 3E Gestao Energetica, Itajuba, MG, Brazil, Antonio Alves de Moura Júnior, Christian Coro-nado Rodriguez, Universidade Federal de Itajuba, Itajuba, MG, Brazil, Marco Antonio Rosa do Na-scimento, Federal University of Itajubá- UNIFEI, Itajubá, MG, Brazil

Experimental Investigation of a Low Pres-sure Model Steam Turbine With Support-ing Rib in Close Vicinity to the Last Stage Rotor Blades at Varying Operating Condi-tions GT2016-57258 Fabian F. Müller, Markus Schatz, Damian Vogt,

University of Stuttgart, Stuttgart, Germany, An-dreas Rehnsch, Siemens AG, Mülheim a.d. Ruhr, Germany

FINAL PROGRAM | 73

TUESDAY, JUNE 14 10:45AM - 12:45 PM

STRUCTURES & DYNAMICS: FATIGUE, FRACTURE & LIFE

PREDICTION

STRUCTURES & DYNAMICS: ROTORDYNAMICS

STRUCTURES & DYNAMICS: STRUCTURAL MECHANICS,

VIBRATION & DAMPING

Fatigue Life Modeling Rotordynamic Effects of Bearings and Seals

Mistuning of Blisks and Bladed Disks III

Paper Session • Room 300 • TB-28-2 Paper Session • Room 307C • TB-30-3 Paper Session • Room 308A • TB-32-3

Session Chair: Chris Hulme, General Elec-tric (Switzerland) GmbH.Session Co-Chair: Daniel Leidermark, Linköping University

Session Chair: Jason Wilkes, Southwest Re-search Institute

Session Chair: Bogdan Epureanu, Universi-ty of MichiganSession Co-Chair: Loic Salles, Imperial col-lege

10:4

5

Fatigue Behavior Comparisons Between Ultrasonic and Servohydraulic Axial Testing Procedures GT2016-56387 Onome Scott-Emuakpor, AFRL, Wright Patter-

son AFB, OH, United States, Tommy George, Casey Holycross, US Air Force Research Lab-oratory, Wright Patterson AFB, OH, United States, Joseph Beck, Perceptive Engineering Analytics, Lino Lakes, MN, United States, Jeff Brown, US Air Force Research Laboratory, Wright Patterson AFB, OH, United States

Investigation on the Seal Structure Design and Rotor Vibration Controller for Back-to-Back Centrifugal Compressor GT2016-56900 Qihang Li, Weimin Wang, Binbin Liu, Xing Shao,

Shuai Gao, Beijing University of Chemical Tech-nology, Beijing, China

Resonant Response of Mistuned Bladed Disk Expressed by Vibratory Stress GT2016-56053 Yasutomo Kaneko, Ryukoku University, Otsu,

Shiga, Japan, Kazushi Mori, Mitsubishi Heavy Industries, Ltd., Hyogo 676-8686, Japan, Hiroha-ru Ooyama, MHPS LTD, kanagawa, Japan

11:1

5

Analysis of Multiaxial Fatigue Evalu-ation in Engine Components Using an Improved Multiaxial Fatigue Life Model GT2016-57128 Cheng-cheng Zhang, Yuan Ren, Jing-yun Gao,

Ying Li, Kun Yang, AVIC Commercial Aircraft Engine Co. Ltd, Shanghai, China

Rigid Mode Vibration Control and Dynamic Behavior of Hybrid Foil-Magnetic Bearing (HFMB) Turbo Blower GT2016-57712 Sena Jeong, Korea Institute of Science and Tech-

nology, Seoul, Korea (Republic), Jungwan Kim, KIST, Seoul, South Korea, Korea (Republic), Doy-oung Jeon, Sogang Univ, Seoul, South Korea, Ko-rea (Republic), Yong-Bok Lee, Korea Institute of Science and Technology, Seoul, Korea (Republic)

Forced Vibration of Mistuned Bladed Discs in Last Stage LP Steam Turbine GT2016-57427 Romuald Rzadkowski, Institute of Fluid Flow

Machinery, Gdansk, Poland, Artur Maurin, Insti-tute of Fluid Flow Machinery, Gdansk Pomorskie, Poland, Leszek Kubitz, Institute of Fluid Flow Machinery, Gdansk, Poland, Ryszard Szczepan-ik, Air Force Institute of Technology, Warsaw, Poland

11:4

5

Development of a Fatigue Life Assess-ment and Prediction Framework for a Bimetallic-Welded Thick-Wall Compo-nent of a Steam Turbine GT2016-56512 Mo-How Herman Shen, Sajedur Akanda,

Ohio State University, Columbus, OH, United States, Xia Liu, Shanghai Electric, Shanghai, China, PENG WANG, Shanghai Electric Pow-er Generation Equipment Co.,Ltd., Shanghai, China

Auxiliary Bearing System Optimization for AMB Supported Rotors Based on Rotor Drop Analysis: Part I: Rotor Drop Analysis Method GT2016-56323 Jianming Cao, Rotor Bearing Solutions Interna-

tional, Charlottesville, VA, United States, Paul Allaire, Rotor Bearing Solutions International, LLC, Charlottesville, VA, United States, Timothy Dimond, Rotor Bearing solutions International, Charlottesville,, VA, United States, saeid dousti, Rotor Bearing Solutions International, Charlot-tesville, VA, United States

Numerical Application of Double Modal Synthesis to an Industrial Mistuned Clus-tered Stator Vane and Experimental Vali-dation GT2016-57640 Jonathan Philippe, Fabrice Thouverez, Laurent

Blanc, Ecole Centrale de Lyon, ECULLY CEDEX, France, Marion Gruin, Safran Snecma, Mois-sy-Cramayel, France

12:15

Low Cycle Fatigue of 9-12% Cr Steel at Elevated Temperature: Cyclic Deforma-tion Behavior and Life Assessment GT2016-56976 Peng Zhao, Fu-Zhen Xuan, De-Long Wu, East

China University of Science and Technology, Shanghai, China

Auxiliary Bearing System Optimization For AMB Supported Rotors Based On Rotor Drop Analysis - Part II: Optimization For Example Vertical And Horizontal Machines GT2016-56324 Jianming Cao, Rotor Bearing Solutions Interna-

tional, Charlottesville, VA, United States, Paul Allaire, Rotor Bearing Solutions International, LLC, Charlottesville, VA, United States, Timothy Dimond, Rotor Bearing solutions International, Charlottesville,, VA, United States, saeid dousti, Rotor Bearing Solutions International, Charlot-tesville, VA, United States

Multi-Stage Coupled Forced Response of Aircraft Engine Compressor and Turbine Bladed Discs GT2016-57643 Romuald Rzadkowski, Institute of Fluid Flow

Machinery, Gdansk, Poland, Artur Maurin, Insti-tute of Fluid Flow Machinery, Gdansk Pomorskie, Poland

74 | ASME 2016 TURBO EXPO

TUESDAY, JUNE 14 10:45AM - 12:45 PM

SUPERCRITICAL CO2 POWER CYCLES

TURBOMACHINERY: AXIAL FLOW FAN & COMPRESSOR

AERODYNAMICS

TURBOMACHINERY: AXIAL FLOW TURBINE

AERODYNAMICS

sCO2 Cycle and Machinery Modeling Design Perspectives Tip leakage flows I

Paper Session • Room 317A • TB-36-4 Paper Session • Room 317A • TB-37-1 Paper Session • Room 318C • TB-38-3

Session Chair: Jason Wilkes, Southwest Research Institute

Session Chair: Bronwyn Power, RR Corpo-rationSession Co-Chair: Sungho Yoon, GE Global Research

Session Chair: Young Seok Kang, Korea Aerospace Research InstituteSession Co-Chair: Chao Zhou, Peking Uni-versity

10:4

5

Dynamic Model of a 10 MW Supercritical CO2 Recompression Brayton Cycle GT2016-56459 Fabio Lambruschini, University of Genoa,

Genova, Italy, Stephen Zitney, Eric Liese, NETL, Morgantown, WV, United States, Al-berto Traverso, Univ Of Genova, Genova 16145, Italy

Design of Compressor Endwall Velocity Triangles GT2016-57396 Kiran Auchoybur, University of Cambridge, Cam-

bridge, Cambridgeshire, United Kingdom, Robert Miller, University of Cambridge, Cambridge, CB3 0DY, United Kingdom

Effects of Tip Shroud Geometries on Low-Pressure Turbine Performance GT2016-56006 Sébastien Le Guyader, Julien Munoz, Jacques

Demolis, TURBOMECA, Bordes, France

11:1

5

Performance Analysis and Comparison Study of Transcritical Power Cycles Using CO2-Based Mixtures as Working Fluids GT2016-57132 Jiaxi Xia, Jiangfeng Wang, Xi’an Jiaotong

University, Xi’an, China, Pan Zhao, Xian Ji-aotong University, Xian, China, Dai Yiping, Xi’an Jiaotong University, Xi’an City, China

Effects of Rotor Tip Blade Loading Varia-tion on Compressor Stage Performance GT2016-57727 Aniwat Tiralap, Gas Turbine Laboratory, MIT,

Cambridge, MA, United States, C.S. Tan, Massa-chusetts Institute of Technology, Cambridge, MA, United States, Christian Cornelius, Siemens AG, Energy Sector, Muelheim, 45473, Germany, Eric Donahoo, Siemens Energy, Inc., Orlando, FL, Unit-ed States, Matthew Montgomery, Siemens Ener-gy, Inc., Jupiter, FL, United States

On the Impact of Passive Tip-Injection on the Downstream Flow Field of a Shrouded LP-Turbine: CFD and Experimental Results GT2016-56196 Pouya Ghaffari, Reinhard Willinger, Technische

Universität Wien, Vienna, Austria

11:4

5

Numerical Method for Simulating Flows of Supercritical CO2 Compressor With Nonequilibrium Condensation GT2016-56431 Takashi Furusawa, Hironori Miyazawa, To-

hoku University, Sendai, Japan, Satoru Yama-moto, Tohoku Univ, Sendai 980-8579, Japan

Alleviation of Shock-Wave Effects on a Highly Loaded Axial Compressor Through Novel Blade Shaping GT2016-57550 Alistair John, University of Sheffield, Sheffield,

United Kingdom, Shahrokh Shahpar, Rolls-Royce plc., Derby, United Kingdom, Ning Qin, Universi-ty of Sheffield, Sheffield, South Yorkshire, United Kingdom

A Novel Suction Side Winglet Design Meth-od for High Pressure Turbine Rotor Tips GT2016-56218 Chao Zhou, Fangpan Zhong, Peking University,

Beijing, China

12:15

A Study of S-CO2 Power Cycle for Waste Heat Recovery Using Isothermal Com-pressor GT2016-57151 Jin Young Heo, Yoonhan Ahn, Jeong-Ik Lee,

Korea Advanced Institute of Science and Technology (KAIST), Daejeon, Korea (Repub-lic)

Effect of Sweep on Performance of an Axial Compressor With Casing Grooves GT2016-56045 Shraman Goswami, Honeywell Technology

Solutions, Bangalore, Karnataka, India, M. Gov-ardhan, Indian Institute of Technology Madras, Chennai, India

Aerodynamic Optimization of a Wing-let-Shroud Tip Geometry for a Linear Tur-bine Cascade GT2016-56268 Min Zhang, Yan Liu, Tian-long Zhang, Meng-

chao Zhang, Dalian University of Technology, Dalian, China, Hongkun Li, Dalian University, Dalian P. R., China

FINAL PROGRAM | 75

TUESDAY, JUNE 14 10:45AM - 12:45 PM

TURBOMACHINERY: DESIGN METHODS & CFD MODELING

FOR TURBOMACHINERY

TURBOMACHINERY: RADIAL TURBOMACHINERY

AERODYNAMICS

TURBOMACHINERY: UNSTEADY FLOWS IN TURBOMACHINERY

Turbine Design Methods and Applications Radial Turbines Unsteady Flows in Compressors I

Paper Session • Room E1 • TB-39-4 Paper Session • Room E4 • TB-42-1 Paper Session • Room 403 • TB-44-4

Session Chair: Asad Asghar, Royal Military College Of CanadaSession Co-Chair: William Allan, V. Shyam,

Session Chair: Bent Phillipsen, ABB Turbo Systems AGSession Co-Chair: Borislav Sirakov, Honey-well Turbo Technologies

Session Chair: Yuan Dong, Pratt and Whit-neySession Co-Chair: Mahmoud Mansour, Hon-eywell Aerospace

10:4

5

Design of Highly Loaded Turbine Stage for Small Gas Turbine Engine GT2016-56178 Prathapanayaka rajeevalochanam, S N Ag-

nimitra Sunkara, Balamurugan Mayandi, Bala Venkata Ganesh Banda, CSIR- National Aerospace Laboratories, Bangalore, Karna-taka, India, Veera Sesha Kumar Chappati, CSIR- National Aerospace Laboratories, Ben-galuru, India, Kishor Kumar, CSIR- National Aerospace Laboratories, Bangalore, Karnata-ka, India

Meanline Modeling of a Radial-Inflow Tur-bine Nozzle With Supersonic Expansion GT2016-58077 Shuo Li, ConceptsNREC, west lebanon, NH, Unit-

ed States, Eric Krivitzky, ConceptsNREC, White River Junction, VT, United States, Dr. Xuwen Qiu, Concepts NREC, Hanover, NH, United States

Fast High Order Large Eddy Simulations on Many Core Computing Systems for Tur-bomachinery GT2016-57468 Yi Lu, Cambridge Flow Solutions Ltd, Cambridge,

United Kingdom, Kai Liu, BoXeR Solutions kk, Kobe, Japan, W.N. Dawes, University of Cam-bridge, Cambridge, United Kingdom

11:1

5

Numerical Simulation of Twin Spool Axial Flow Turbines of a Small Gas Turbine Engine GT2016-56224 Prathapanayaka rajeevalochanam, CSIR-

National Aerospace Laboratories, Bangalore, Karnataka, India, Ramana Murthy Seepana Venkata, Gas Turbine Research establishment, Bangalore, Karnataka, India, S N Agnimitra Sunkara, Balamurugan Mayandi, CSIR- Na-tional Aerospace Laboratories, Bangalore, Kar-nataka, India, Sharad Kapil, Gas Turbine Re-search establishment, Bangalore, Karnataka, India, Senthil Kumaran, National Aerospace Laboratories, Banglore, Karnataka, India

Investigations on the Generation and Weakening of Shock Wave in a Radial Tur-bine With Variable Guide Vanes GT2016-57047 Dengfeng Yang, Dazhong Lao, Ce Yang, Beijing

Institute of Technology, Beijing, China, Liangjun Hu, Ford Motor Company, Dearborn, MI, Unit-ed States, Harold Sun, Ford Motor Company, W Bloomfield, MI, United States

STABILIZING AND ACCELERATING SOLUTION OF HARMONIC BALANCE EQUATION SYSTEM USING THE LU-SGS AND BLOCK JACOBI METHODS GT2016-57292 Xiuquan Huang, Northwestern Polytechnical

University, Xian, China, Dingxi Wang, North-western Polytechnical University, Xi’an, China

11:4

5

Generation of the Equations for the Pro-file Losses Calculation in Blade Row of Axial Turbines in Design Analysis GT2016-56320 Oleg Baturin, Daria Kolmakova, Aleksei Gor-

shkov, Grigorii Popov, Samara State Aero-space University, Samara, Russia

Turbine Performance Under Pulsating In-flow: A Similarity Analysis GT2016-56612 Hua Chen, National Laboratory of Turbocharging

Technology North China Eng Rsrch Inst, Tianjin, China, Apostolos Pesiridis, Brunel University London, Uxbridge, United Kingdom

Analysis of the Unsteady Flow in Compres-sor Cascade With POD Method GT2016-57638 Wang Yangang, Li Yue, Chen Junxu, Northwest-

ern Polytechnical University, Xi’an, China

12:15

Improvement of Laminar-Turbulent Transition Modeling Within a Low-Pres-sure Turbine GT2016-57637 Alexandre Minot, Safran-Snecma, Moissy

Cramayel, France, Julien Marty, ONERA, Meudon, France, Jean-Christophe Boniface, ONERA - Centre de Meudon, Meudon, France, Raphael Barrier, Itham Salah El Din, ONERA, Meudon, France

Unsteady Rotating Radial Load of a Single Stage Radial Inflow Turbine GT2016-56983 Jonathan Marlier, Cryostar France Sas, Hesingue,

France, Virginie Barbieux, NUMFLO, MONS, Bel-gium, Benoit Tartinville, Numeca, 1170 Brussels, Belgium

Effect of Incoming Wakes on the Stator Performance in a Single-Stage Low Speed Axial Flow Compressor Operating at De-sign and Near Stall Conditions GT2016-57981 Guillaume Pallot, IHI Corporation, Tokyo, Japan,

Dai Kato, IHI Corporation, Nishitama-Gun, To-kyo, Japan, Wataru Kanameda, Yutaka Ohta, Waseda University, Tokyo, Japan

76 | ASME 2016 TURBO EXPO

TUESDAY, JUNE 14 2:30 - 5:30 PM

AIRCRAFT ENGINE COAL, BIOMASS & ALTERNATIVE FUELS

COMBUSTION, FUELS & EMISSIONS

Nacelles, Nozzles and MixersWest Meets East: Coal Gasification, IGCC, and

Polygeneration

Combustion Dynamics: Flame Response to Perturbations

Paper Session • Room 318B • TC-1-9 Panel Session • Room 318B • TC-3-5 Paper Session • Room 317C • TC-4-18

Session Chair: William Cousins, United Technologies Research CenterSession Co-Chair: Vishnu Sishtla, UTC Climate Controls & Security

Session Chair: Ting Wang, University Of New OrleansSession Co-Chair: Francesco Fantozzi, Uni-versity of Perugia, Dip. Ingegneria Industri-ale

Session Chair: Jacqueline O’Connor, Penn-sylvania State UniversitySession Co-Chair: Santosh Hemchandra, In-dian Institute of Science

2:30

Full-Scale Turbofan Demonstration of a De-ployable Engine Air-Brake for Drag Manage-ment Applications GT2016-56708 Parthiv Shah, Gordon Pfeiffer, Rory Davis,

Thomas Hartley, Zoltan Spakovszky

Development of TU Gasification Technolo-gy and Its Commercial Application in China GT2016-58367 Jiansheng Zhang, Tsinghua University, Beijjing,

China

Swirl Flame Response to Simultaneous Ax-ial and Transverse Velocity Fluctuations GT2016-57428 Aditya Saurabh, Institut Für Strömungsmechan-

ik Und Technische Akustik, Berlin, Germany, Jo-nas Moeck, TU Berlin, Berlin, Berlin, Germany, Christian Oliver Paschereit, Chair of Fluid Dy-namics, Hermann-Föttinger-Institut, TU Berlin, Berlin, Germany

3:00

A Turbofan-Engine Nacelle Shape De-sign and Optimization Method for Nat-ural Laminar Flow Control GT2016-57463 Songyang Li, Yongjian Zhong, AVIC Commer-

cial Aircraft Engine Co., Ltd, Shanghai, Shang-hai, China

Update of Development of Gasification and Advanced Turbine Technology for Coal-Derived Synfuel and Hydrogen-Rich Programs in the U.S. Department of Energy GT2016-58346 Richard Dennis, US Dept Of Energy, Morgantown,

WV, United States

Modeling Flame Describing Functions Based on Hydrodynamic Linear Stability Analysis GT2016-57316 Kilian Oberleithner, Chair of Fluid Dynamics, In-

stitute of Fluid Dynamics and Technical Acoustics/ TU Berlin, Berlin, Germany, Christian Oliver Pas-chereit, Chair of Fluid Dynamics, Hermann-Föt-tinger-Institut, TU Berlin, Berlin, Germany

3:30

Parametric Geometry and CFD Process for Turbofan Nacelles GT2016-57784 Alexander Heidebrecht, Cranfield Universi-

ty, Cranfield, United Kingdom, Tomasz Piotr Stankowski, David G. MacManus, Cranfield University, Cranfield University, United King-dom

he Recent Technology Advancement of ECUST Gasification Process GT2016-58324 Haifeng Lu, East China University of Science and

Technology, Shanghai,, China

Comparison of Flame Transfer Functions Acquired by Chemiluminescence and Den-sity Fluctuation GT2016-57485 Johannes Peterleithner, Riccardo Basso, Jakob

Woisetschlaeger, Franz Heitmeir, Raimund Schlüssler, Jurgen Czarske, Andreas Fischer

4:00

An Automated Approach to Nacelle Pa-rameterisation Using Intuitive Class Shape Transformation Curves GT2016-57849 Robert Christie, Alexander Heidebrecht,

Cranfield University, Cranfield, Bedfordshire, United Kingdom, David G. MacManus, Cran-field University, Cranfield University, Bedford-shire, United Kingdom

Overview of NEDO's High-Efficiency Clean Coal Technology Development in Japan GT2016-58372 Nobuyuki Zaima, New Energy and Industrial

Technology Development Organization, Kanagaw 212-8554, Japan

Experimental Analysis of High-Amplitude Tem-poral Equivalence Ratio Oscillations in the Mix-ing Section of a Swirl-Stabilized Burner GT2016-56585 Richard Blümner, Bernhard Cosic, Christian Ol-

iver Paschereit, Kilian Oberleithner

4:30

Analytic Assessment of an Embedded Aircraft Propulsion GT2016-57524 Peter F. Pelz, TU Darmstadt, Darmstadt, Hes-

sen, Germany, Ferdinand-J. Cloos, Technische Universität Darmstadt, Darmstadt, Germany, Jörg Sieber, MTU Aero Engines, München, Germany

EPRI’s Perspective on Gasification, IGCC, and Polygeneration GT2016-58320 Jeffrey N. Phillips, Electric Power Research Insti-

tute, Charlotte, NC, United States

Identification of Multi-Parameter Flame Transfer Function for a Reheat Combustor GT2016-57699 Alessandro Scarpato, GE Power, Baden, Switzer-

land, Lisa Zander, TU Berlin, Berlin, Germany, Rohit Kulkarni, Bruno Schuermans, GE Power, Baden, Switzerland

5:00

Current Status and Prospect of Coal Gasifi-cation Projects in Korea GT2016-58335 Yongseung Yun, Inst For Advanced Engrg, Gyung-

gi-do 449-863, Korea (Republic)

Large-Eddy Simulation and Linear Acous-tic Analysis of a Diffusion Swirling Flame Under Forcing and Self-Excitation GT2016-56405 Man ZHANG, AVIC Commercial Aircraft Engine

CO., LTD, Shanghai, shanghai, China

FINAL PROGRAM | 77

TUESDAY, JUNE 14 2:30 - 5:30 PM

COMBUSTION, FUELS & EMISSIONS

CONTROLS, DIAGNOSTICS & INSTRUMENTATION EDUCATION

Dry Low-NOx Combustor Development Gas Path Performance Monitoring Design

Paper Session • Room E3 • TC-4-28 Paper Session • Room 308B • TC-5-4 Paper Session • Room 317B • TC-7-1

Session Chair: Michael Duesing, ANSAL-DO ENERGIASession Co-Chair: Jean-Michel Lourier, General Electric DE

Session Organizer: David Doel, GE AviationSession Co-Chair: Donald L. Simon, NASA Glenn Research Center

Session Chair: Dr. Anestis I. Kalfas, Aristot-le University of ThessalonikiSession Co-Chair: Dr. Claudio Lettieri, TU Delft

2:30

An Overview of Low-Emission Combus-tion Research at NASA Glenn GT2016-56100 Dhanireddy Reddy, Chi-Ming Lee, NASA

Glenn Research Center, Cleveland, OH, United States

Prediction of Compressor Fouling Rate Un-der Time Varying Operating Conditions GT2016-56242 Houman Hanachi, Jie Liu, Carleton University,

Ottawa, ON, Canada, Avisekh Banerjee, Ying Chen, Life Prediction Technologies Inc., Ottawa, ON, Canada

Introduction of a Project-Based-Course in Turbine Stage Design for Undergraduate Students at Graz University of Technology GT2016-56071 Andreas Marn, Graz University of Technology,

Graz, Austria, Florian Schönleitner, Technische Universität Graz, Graz, Austria, Johannes Peter-leithner, Jakob Woisetschlaeger, Franz Heit-meir, Graz University of Technology, Graz, Austria

3:00

Investigation of a Novel Fuel Injector for Dry Low NOx Combustor GT2016-56722 Mahmoud Hamza, Arul Kumaran, Jianing Li,

University of Cincinnati, Cincinnati, OH, Unit-ed States, Umesh Bhayaraju, univ of cincin-nati, Cincinnati, OH, United States, San-Mou Jeng, University of Cincinnati, Cincinnati, OH, United States

Industrial Gas Turbine Health and Perfor-mance Assessment With Field Data GT2016-57722 Ioannis Roumeliotis, Hellenic Naval Academy,

Piraeus, 18539, Greece, Nikolaos Aretakis, Nation-al Technical University of Athens, Attiki, Greece, Alexios Alexiou, National Technical University of Athens, Athens, Greece

Unmanned Air Vehicle Interdisciplinary Design Project GT2016-56225 Ioannis Templalexis, Hellenic Air Force Acade-

my, Greece, Theodore Lekas, Aggelos Koutso-michalis, Hellenic Airforce Academy, Athens, Greece, Anestis I. Kalfas, Aristotle University of Thessaloniki, Thessaloniki, Greece

3:30

Laser-Based Investigation on a Dry Low Emission Industrial Prototype Burner at Atmospheric Pressure Conditions GT2016-57242 Arman Ahamed Subash, Atanu Kundu, Robert

Collin, Jens Klingmann, Marcus Aldén

A Computational and Experimental Com-pressor Design Project for Japanese and British High-School Students GT2016-56231 Sam Grimshaw, University of Cambridge, Cam-

bridge, United Kingdom, Carl Sequeira, Hybrid Air Vehicles Ltd, Bedford, Bedfordshire, United King-dom, Max Hewkin-Smith, Whittle Laboratory, Uni-versity of Cambridge, Cambridge, United Kingdom

4:00

Experimental Study of a Low-NOx Lean Direct Injection Combustor Design GT2016-56499 Abdelallah Ahmed, Jacob Haseman, Samir

Tambe, San-Mou Jeng, University of Cincin-nati, Cincinnati, OH, United States

Design of Dynamic Tracking Filter for Mod-el Based Diagnosis of Gas Turbine Engine GT2016-56481 Yongwen Liu, Shanghai Jiao Tong University,

Shanghai, China, Yunsheng Liu, Naval Academy of Armament, Beijing, China

Derivative Design of Axial Fan Range: From Academia to Industry GT2016-57469 Tommaso Bonanni, Sapienza, University of

Rome, Roma, Italy, David Volponi, Sapienza Uni-versity of Rome, Rome, Italy, Alessandro Cors-ini, Sapienza University of Rome, Roma, Italy, Giovanni Delibra, ‘Sapienza’ University of Rome, Rome, Italy, Anthony G. Sheard, AGS Consulting, LLC, Atlanta, GA, United States, Lucio Cardillo, Sapienza University of Rome, Rome, Italy

4:30

Comparison of the Combustion Char-acteristics of Liquid Single-Component Fuels in a Gas Turbine Model Combustor GT2016-56177 Jasper Grohmann, William O’Loughlin, Wolf-

gang Meier, Manfred Aigner, German Aero-space Center (DLR), Institute of Combustion Technology, Stuttgart, Germany

Full and Part-Load Performance Deteriora-tion Analysis of Industrial Three-ShaftGas Turbine Based on Genetic Algorithm GT2016-57120 Yang Qingcai, Shuying Li, Yunpeng Cao, Ning-

bo Zhao, Harbin Engineering University, Harbin, China

5:00

FlameSheet™ Combustor Engine and Rig Validation for Operational and Fuel Flexibility With Low Emissions GT2016-56696 Hany Rizkalla, Peter Stuttaford, Khalid

Oumejjoud, Nicolas Demougeot, Justin Bos-noian, Fred Hernandez, Matthew Yaquin-to, Afzal Pasha Mohammed, Ryan Weller, Dwain Terrell

78 | ASME 2016 TURBO EXPO

TUESDAY, JUNE 14 2:30 - 5:30 PM

ELECTRIC POWER HEAT TRANSFER: GENERAL HEAT TRANSFER

HEAT TRANSFER: INTERNAL AIR SYSTEMS & SEALS (WITH

TURBOMACHINERY)

Voice of the Customer - User Experience with Gas Turbine

Technology

Impingement Heat Transfer with Surface Enhancement

Rotor-Rotor and Rotor-Stator Disc Cavities

Panel Session • Room 317B • TC-8-2 Paper Session • Room 301 • TC-13-7 Paper Session • Room 307A • TC-15-2

Session Chair: Justin Zachary, Samsung Session Organizer: Meinhard T. Schobeiri, Texas A & M UniversitySession Co-Organizer: Jianhua Wang, Univer-sity of Science & Technology

Session Organizer: Alexander Mirzamogha-dam, Honeywell InternationalSession Co-Organizer: Chiyuki Nakamata, IHI Corporation

2:30

P

A

N

E

L

“Influences of Target Surface Roughness on Im-pingement Jet Array Heat Transfer: Part 1: Ef-fects of Roughness Pattern, Roughness Height, and Reynolds Number” GT2016-56354 Warren Buzzard, Zhong Ren, Phil Ligrani, University

of Alabama in Huntsville, Huntsville, AL, United States, Chiyuki Nakamata, IHI Corporation, Tokyo, Japan, Sa-toshi Ueguchi, IHI Corporation, Yokohoma, Japan

Analysis of Heavy Duty Gas Turbine Stator-Ro-tor Cavity Through 3D CFD - 1D Fluid Network - Field Measurements Combined Approach GT2016-57629 Francesco Bavassano, Ansaldo Sviluppo Ener-

gia, Genoa, Italy, Marco Mantero, Ansaldo Svi-luppo Energia, Genova, Genova, Italy, Thibault Gasnier, Emanuele Ronconi, Ansaldo Sviluppo Energia, Genoa, Italy

3:00

Influences of Target Surface Roughness on Im-pingement Jet Array Heat Transfer: Part 2: Ef-fects of Roughness Shape, and Reynolds Number” GT2016-56355 Warren Buzzard, Zhong Ren, Phil Ligrani, Uni-

versity of Alabama in Huntsville, Huntsville, AL, United States, Chiyuki Nakamata, IHI Corpora-tion, Tokyo, Japan, Satoshi Ueguchi, IHI Corpora-tion, Yokohoma, Japan

Direct Numerical Simulation of Rotat-ing Cavity Flows Using a Spectral Ele-ment-Fourier Method GT2016-56486 Diogo Berta Pitz, University of Surrey, Guild-

ford, United Kingdom, John Chew, University of Surrey, Surrey, United Kingdom, Olaf Marxen, Nicholas J. Hills, University of Surrey, Guildford, United Kingdom

3:30

Use of Rib Turbulators to Enhance Post-Im-pingement Heat Transfer for Curved Surface GT2016-56638 Jahed Hossain, Christian Garrett, Andres Curbelo,

John Harrington, Wenping Wang, University of Cen-tral Florida, Orlando, FL, United States, Jay Kapat, University of Central Florida (UCF), Orlando, FL, Unit-ed States, Steven Thorpe, Michael Maurer, Ansaldo Energia Switzerland Ltd., Baden, Switzerland

Modeling of Compressor Drum Cavities With Radial Inflow GT2016-56505 Dario Amirante, Zixiang Sun, University of

Surrey, Guildford, United Kingdom, John Chew, University of Surrey, Surrey, United Kingdom, Nicholas J. Hills, University of Surrey, Guildford, United Kingdom, Nicholas Atkins, Cambridge University, Cambridge, United Kingdom

4:00

Heat Transfer and Fluid Flow of a Single Jet Impingement in Cross-Flow Modified by a Vortex Generator Pair GT2016-56894 Bengt Sunden, Chenglong Wang, Lund Universi-

ty, Lund, Sweden, Lei Wang, Lei Luo, Lund Univer-sity, Energy Sciences, Lund, Sweden

Effect of Buoyancy-Induced Rotating Flow on Temperatures of Compressor Discs GT2016-56374 Hui Tang, University of Bath, Bath, United King-

dom, J Michael Owen, University of Bath, Bath BA2 7AY, United Kingdom

4:30

Secondary Flow and Extra Heat Transfer Enhance-ment of Ribbed Surface After Jet Impingement GT2016-57563 Zhaoguang Wang, Qiang Zhang, City Universi-

ty London, London, United Kingdom, Kexin Liu, Changan UK R&D Centre Limited, Nottingham, United Kingdom, Youyou Yan, City University Lon-don, London, United Kingdom

Effect of Bolts on Flow and Heat Transfer in a Rotor-Stator Disc Cavity GT2016-56470 Sulfickerali Noor Mohamed, Univ of Surrey,

Guildford, United Kingdom, Nicholas J. Hills, University of Surrey, Guildford, United Kingdom, John Chew, University of Surrey, Surrey, United Kingdom

5:00

Impingement Cooling in Narrow Rectangu-lar Channel With Novel Surface Features GT2016-58084 Sarwesh N. Parbat, Sin Chien Siw, University of

Pittsburgh, Pittsburgh, PA, United States, Mink-ing Chyu, Univ Of Pittsburgh, Pittsburgh, PA, United States

Experimental Investigation on Swirl and Heat Transfer Within a Rotor-Stator Cavity GT2016-57608 Daniele Massini, Unversity of Florence, Firenze,

Italy, Bruno Facchini, University of Florence, Florence, Italy, Riccardo Da Soghe, Ergon Re-search, Firenze, Italy, Mirko Micio, ERGON re-search srl, Florence, Italy

FINAL PROGRAM | 79

TUESDAY, JUNE 14 2:30 - 5:30 PM

HEAT TRANSFER: COMBUS-TORS (WITH COMBUSTION,

FUELS & EMISSIONS)

MANUFACTURING MATERIALS & METALLURGY

MICROTURBINES, TURBO-CHARGERS & SMALL

TURBOMACHINES

Combustor Liner Cooling - Numerical and Optimization Gas Turbine Repair Technologies Turbochargers - Concepts &

Performance

Paper Session • Room 307B • TC-17-2 Panel Session • Room 403 • TC-21-4 Paper Session • Room 308C • TC-23-7

Session Chair: Uwe Ruedel, Alstom, Gas TurbinesSession Co-Chair: Stephen Lynch, Penn State University

Session Chair: Boran Cakin, GE Power and WaterSession Co-Chair: Doug Nagy, Liburdi Tur-bine Services, Inc.

Session Chair: Harold Sun, Ford Motor CompanySession Co-Chair: Borislav Sirakov, Honey-well Turbo Technologies

2:30

Unsteady CFD Investigation of Effusion Cooling Process in a Lean Burn Aero-En-gine Combustor GT2016-56603 Lorenzo Mazzei, Alessio Picchi, Antonio

Andreini, Bruno Facchini, University of Flor-ence, Florence, Italy, Ignazio Vitale, GE Avio, Rivalta di Torino (TO), Italy

New Solid-State Wrought Metal Deposition Process for Additive Manufacturing, Re-pair, and Coatings GT2016-57704 Nanci Hardwick, Aeroprobe Corporation, Chris-

tiansburg, VA, United States

Preliminary DoE Analysis and Control of Mapping Procedure for a Turbocharger on an Engine Gas-Stand GT2016-56466 Calogero Avola, Pavlos Dimitriou, Richard

Burke, Colin Copeland, University of Bath, Bath, Bath and North East Somerset, United Kingdom

3:00

A 3D Coupled Approach for the Thermal Design of Aero-Engine Combustor Lin-ers GT2016-56605 Lorenzo Mazzei, Antonio Andreini, Bruno

Facchini, University of Florence, Florence, Ita-ly, Lorenzo Bellocci, Ge Avio, Rivalta di Torino (TO), Italy

Field Evalvaluation of Industrial Gas Tur-bine Blade Modified for Life Improvement GT2016-58300 Paul Lowden, Liburdi Turbine Services, Dundas,

Canada

Development of a Multipoint Matching Method for Turbocompound Systems GT2016-56574 Zhanming Ding, Weilin Zhuge, Yangjun Zhang,

Tsinghua University, Beijing, China, Yong Yin, Commercial Vehicle Technical Center, Dongfeng Motor Company Limited, Wuhan, China, Shuy-ong Zhang, Science and Technology on Diesel En-gine Turbocharging Laboratory, Tianjin, China

3:30

Validation of Surface Temperature Measurements on a Combustor Liner Under Full-Load Conditions Using a Novel Thermal History Paint GT2016-56669 Robert Krewinkel, Jens Färber, Christopher

Pilgrim, Jörg Peter Feist, Raffaele Saggese, Stéphane Berthier, Silvia Araguas, Alvaro Gon-zalez, Martin Lauer, Dirk Frank, Ulrich Orth,

Gas Turbine Component Repair Develop-ment for the Korean Market GT2016-58301 Hyun Choi, Hanwha Techwin, Changwon-si,

Gyeongsangnama

4:00

Combustor Effusion Cooling Multipa-rameter Aerothermal Numerical Anal-ysis GT2016-57647 Nicolas Savary, Guillaume Cottin, Robin

Herve, Turbomeca, Safran Group, Bordes, France

Repair and Reverse Engineering for Com-bustion Parts of type GT11NM Gas Turbine GT2016-58333 Youn Seok-Jo, Sung-il Turbine, Gangseo-gu, Bu-

san, Korea (Republic)

Method to Determine Initial Estimates for the Air Handling System Layout of IC En-gines Based on Turbomachinery Design Rules GT2016-56996 Rodrigo Rodriguez Erdmenger, GE, Munich, Ger-

many, Aneesh Vadvadgi, GE Global Research, Bangalore, KA, India, Cathal Clancy, General Electric Deutschland Holding Gmb, Garching bei Munchen, Germany, Thomas Lavertu, GE Global Research, Niskayuna, NY, United States

4:30

Detailed Large Eddy Simulations (LES) of Multi-Hole Effusion Cooling Flow for Gas Turbines GT2016-57957 Yonduck Sung, Anne L. Dord, Gregory Las-

kowski, Lee Shunn, Greg Natsui, Jay Kapat,

Fabrication of New GT13DM Inner Liner and Hot Gas Casing GT2016-58332 Sanmugham Thanaraj, TNB Repair and mainte-

nance, Petaling Jaya, Malaysia

Analysis and Comparison of the Performance of an Inverted Brayton Cycle and Turbo-Compound-ing With Decoupled Turbine and CVT Driven Compressor for Small Automotive Engines GT2016-57675 Pengfei Lu, Chris Brace, Bo Hu, Colin Copeland,

University of Bath, Bath, United Kingdom

5:00

Rapid Preliminary Combustor Design Using a Flow Network Approach GT2016-57685 Benjamin Du Toit, Flownex, Potchefstroom,

North West, South Africa, Stephen Theron, PADT, Inc, Denver, CO, United States

Hermetic MA-40-kW-Class Steam Turbine System for the Bottoming Cycle of Internal Combustion Engines GT2016-57805 Michael H. Kraus, Frank Opferkuch, Michael De-

ichsel, Peter Hirsch, Christoph Heckel

80 | ASME 2016 TURBO EXPO

TUESDAY, JUNE 14 2:30 - 5:30 PM

OIL & GAS APPLICATIONS STEAM TURBINES STRUCTURES & DYNAMICS: BEARING & SEAL DYNAMICS

Compressor Design and Performance

Mechanical Integrity of Steam Turbines Bearings - Gas Bearings 1

Paper Session • Room E3 • TC-24-1 Tutorial Session • Room E2 • TC-26-13 Paper Session • Room 300 • TC-31-1

Session Chair: Mirko Morini, University of ParmaSession Co-Chair: Kevin Hoopes, South-west Research Institute

Session Chair: Grant Ingram, Durham Uni-versitySession Co-Chair: Nikola Kafedzhiyski, KTH

Session Chair: Aaron Rimpel, Southwest Re-search InstituteSession Co-Chair: Mihai Arghir, Universite De Poitiers - Instit Pprime

2:30

Calculation of Enthalpy and Entropy From Experimentally Measurable Quantities GT2016-56646 Shane Coogan, Klaus Brun, Sarah Simons,

Brandon Ridens, Southwest Research Insti-tute, San Antonio, TX, United States, Rainer Kurz, Solar Turbines Incorporated, San Diego, CA, United States

The Basics of Mechanical Integrity for Steam Turbines - Part 1 GT2016-58364 Jaroslaw Szwedowicz, General Electric (Switzer-

land) GmbH, Baden, Switzerland

Scaling Laws of Radial Clearance and Bump Stiffness of Radial Foil Bearings GT2016-56704 Srikanth Honavara Prasad, The University of

Texas at Arlington, Arlington, TX, United States, Daejong Kim, University of Texas at Arlington, Arlington, TX, United States

3:00

Experimental Investigation of Stall and Surge in a Multistage Compressor GT2016-57168 Enrico Munari, University of Ferrara, Ferrara,

Emilia Romagna, Italy, Mirko Morini, Univer-sity of Parma, Parma, Italy, Michele Pinelli, Pier Ruggero Spina, University of Ferrara, Ferrara, Italy, Alessio Suman, Università di Ferrara, Ferrara, Italy

The Basics of Mechanical Integrity for Steam Turbines - Part 2 GT2016-58366 Henning Almstedt, Siemens AG, Muelheim An Der

Ruhr, Germany

Enhancement of the Rotordynamic Per-formance of a Shaft Supported by Air Foil Bearings With Vibration Damper GT2016-56790 Behzad Zamanian Yazdi, Daejong Kim, Fang-

cheng Xu, University of Texas at Arlington, Ar-lington, TX, United States

3:30

An Academic Test Rig for Industrial Centrifugal Compressor Stages: A De-sign Approach GT2016-57697 Alessandro Bianchini, Univ of Florence, Firen-

ze, Italy, Giovanni Ferrara, Univ Of Florence, Florence 50139, Italy, Lorenzo Ferrari, Nation-al Research Council of Italy, Sesto Fiorentino (FI), Italy

Resonance and Rotor dynamicsTutorial. GT2016-58349 Paul Cooper, Alstom Power Limited, Rugby, Unit-

ed Kingdom

Influence of Gas Feeding Position on the Performance of Radial-Inflow Hydrostatic Gas Ultra-Short Journal Bearings GT2016-57709 Chao Nie, Xiaojun Yan, Beihang University, Bei-

jing, China, Xia Chen, Beihang University, School of Energy and Power Engineering, Beijing, China

4:00

2nd Quadrant Centrifugal Compressor Performance: Part I GT2016-57117 Elisabetta Belardini, Dante Tommaso Rubi-

no, GE Oil & Gas, Firenze, Italy, Libero Tapi-nassi, Marco Pelella, GE Oil & Gas, Florence, FI, Italy

Flutter and Forced response GT2016-58363 Sangjoon Shin, Seoul National University, Seoul,

Korea (Republic)

Assessment of Porous Type Gas Bearings: Measurements of Bearing Performance and Rotor Vibrations GT2016-57876 Luis San Andres, Travis Cable, Yong Zheng, Os-

car De Santiago, Drew Devitt

4:30

Effect of Operating Conditions on the Elas-to-Hydrodynamic Performance of Foil Thrust Bearings for Supercritical CO2 Cycles GT2016-56524 Kan Qin, The University of Queesnland, Brisbane, QLD,

Australia, Ingo Jahn, The University of Queensland, QLD, Queensland, Australia, Peter Jacobs, The Uni-versity of Queesnland, Brisbane, QLD, Australia

5:00

2nd Quadrant Centrifugal Compressor Performance: Part II GT2016-57124 Elisabetta Belardini, Rajeev Kumar Pandit,

Dante Tommaso Rubino, V V N K Satish Koyyalamudi, Libero Tapinassi

Performance Measurements of Gas Bearings With High Damping Structures of Polymer and Bump Foil via Electric Motor Driving Tests and MA-1-DOF Shaker Dynamic Loading Tests GT2016-57345 Kyuho Sim, Jisu Park, Seoul National University

of Science and Technology, Seoul, Korea (Republic)

FINAL PROGRAM | 81

TUESDAY, JUNE 14 2:30 - 5:30 PM

STRUCTURES & DYNAMICS: STRUCTURAL MECHANICS,

VIBRATION & DAMPING

SUPERCRITICAL CO2 POWER CYCLES

TURBOMACHINERY: AXIAL FLOW FAN & COMPRESSOR

AERODYNAMICS

Damping Methodologies and Damping Estimation sCO2 Power Cycle Path Forward Active Flow Control

Paper Session • Room 307C • TC-32-8 Panel Session • Room 402 • TC-36-7 Paper Session • Room 318C • TC-37-12

Session Chair: Malte Krack, University of StuttgartSession Co-Chair: Bogdan Epureanu, Uni-versity of Michigan

Session Chair: Richard Dennis, US Dept Of EnergySession Co-Chair: Eric Clementoni, Bechtel Marine Propulsion Corporation

Session Chair: Kishore Ramakrishnan, GE Global ResearchSession Co-Chair: David B. Stephens, NASA Glenn Research Center

2:30

Modal Identification of Dynamically Coupled Bladed Disks in Run-Up Tests GT2016-57251 Luigi Carassale, University of Genova, Geno-

va, Italy, Michela Marrè-Brunenghi, Ansaldo Energia, 16152 Genova, Italy, Stefano Patrone, Ansaldo Sviluppo Energia, Genova, Italy

Perspective on the S-CO2 power system fu-ture market and new technologies to accel-erate the commercialization GT2016-58353 Jeong-Ik Lee, Korea Advanced Institute of Science

and Technology (KAIST), Daejeon, Korea (Repub-lic)

Experimental Study on the Use of Synthet-ic Jet Actuators for Lift Control GT2016-56403 Ricardo Torres, Solar Turbines, San Diego, CA,

United States, Gustaaf Jacobs, San Diego State University, San Diego, CA, United States, Michael Cave, Solar Turbines, San Diego, CA, United States

3:00

A Practical Approach for Evaluation of Equivalent Linear Damping From Mea-surements of Mistuned and/or Non-Linear Stages and Forced Response Validation GT2016-56435 Dr. Andreas Hartung, MTU Aero Engines AG,

München, Germany, Dr. Hans-Peter Hacken-berg, MTU Aero Engines AG, Munich, Germany

GE Perspective on sCO2 Power Cycle Devel-opment Path GT2016-58354 Douglas Hofer, GE Global Research, Niskayuna,

NY, United States

Tip Leakage Vortex Control in a Low Speed Ax-ial Compressor Using Pulsed Plasma Actuation GT2016-56795 Yun Wu, Xi’An Jiaotong University, Xi’an,Shaanxi,

China, Cai-dong Ma, Air Force Engineering University, Xi’an, Non-US Resident, China, Si-meng TIAN, Xi’an Jiaotong University, Xi’an, Xi’an,Shaanxi, China, Youtian Zhou, Jun Li, Ying-hong Li, Air Force Engineering University, Xi’an, China

3:30

Parametrically Induced Damping in a Cracked Rotor GT2016-58113 Zbigniew Kulesza, Bialystok University of

Technology, Bialystok, Poland, Jerzy Sawic-ki, Cleveland State University, Cleveland, OH, United States

Heatric Perspective on sCO2 Power Cycle Development Path GT2016-58355 Dereje Shiferaw, Heatric, Poole, United Kingdom

Endwall Secondary Flow Control in a High Speed Compressor Cascade With Vortex Generator Jets GT2016-56843 Huaping Liu, Deying Li, Bingxiao Lu, Menghan

Yu, Harbin Institute of Technology, Harbin, Hei-longjiang, China

4:00

A Comparative Study on the Dynamic Characteristics of Bladed Disks With Piezoelectric Network and Piezoelectric Shunt Circuit GT2016-56794 Jiuzhou LIU, Lin LI, Pengcheng DENG, Chao

LI, Beihang University, Beijing, China

SwRI Perspective on sCO2 Power Cycle De-velopment Path GT2016-58356 Klaus Brun, Southwest Research Institute, San

Antonio, TX, United States

3D Unsteady Simulation of a Low Speed Low-Reaction Aspirated Compressor GT2016-56888 Longxin Zhang, Xin Du, Harbin Institute of

Technology, Harbin, China, Xun Liu, Department of gas turbine, NO.703 research institute of CSIC, Harbin, Heilongjiang, China, Songtao Wang, Harbin Institute of Technology, Harbin, Heilong-jiang, China

4:30

Impulse Mistuning of Blades and Vanes GT2016-56433 Dr. Andreas Hartung, MTU Aero Engines

AG, München, Germany, Dr. Ulrich Retze, Dr. Hans-Peter Hackenberg, MTU Aero Engines AG, Munich, Germany

Experimental Investigations on Highly Loaded Compressor Airfoils With Active Flow Control Under Non-Steady Flow Conditions in a 3D-An-nular Low-Speed Cascade GT2016-56891 Christian Brück, Christine Tiedemann, Dieter

Peitsch,

5:00

assive Control of Critical Speeds of a Rotating Shaft Using Eccentric Sleeves: Model Development GT2016-58155 Antony Kirk, Jonathan Griffiths, Chris Bing-

ham, Grahame Knowles, Ron Bickerton, Uni-versity of Lincoln, Lincoln, United Kingdom

Experimental Study and Vortex Analysis in a Linear Compressor Cascade With Ac-tive Flow Control GT2016-57276 Simeng TIAN, Yun Wu, Yangyang WU, Zhibo

ZHANG, Bangqin Cheng, Ying-hong Li

82 | ASME 2016 TURBO EXPO

TUESDAY, JUNE 14 2:30 - 5:30 PM

TURBOMACHINERY: DESIGN METHODS & CFD MODELING

FOR TURBOMACHINERY

TURBOMACHINERY: RADIAL TURBOMACHINERY

AERODYNAMICS

TURBOMACHINERY: MULTIDISCIPLINARY DESIGN

APPROACHES, OPTIMIZATION & UNCERTAINTY QUANTIFICATION

Methods and CFD Modeling for Turbomachinery Design

Radial Compressors - Performance Optimization (III) Axial Compressor Design

Paper Session • Room 327 • TC-39-2 Paper Session • Room E4 • TC-42-5 Paper Session • Room E1 • TC-45-2

Session Chair: Jochen Gier, MTUSession Co-Chair: Sunil Patil, ANSYS Inc

Session Chair: Peter Harley, IHI Charging SystemsSession Co-Chair: Jason Walkingshaw, IHI Charging Systems International

Session Chair: Stéphane Hiernaux, Safran Group - Techspace Aero

2:30

Flow Pattern Evolution and Energy Decompo-sition of Flows at Different Operating Condi-tions in a Hydrodynamic Torque Converter GT2016-56874 Wei Wei, Mingxing Huang, Qingdong Yan,

Yu Li

Mechanism and Flow Control on the Mis-matching of Impeller and Vaned Diffuser Caused by Inlet Prewhirl for Centrifugal Compressors GT2016-56244 Qiangqiang Huang, Xinqian ZHENG, Aolin

Wang, Tsinghua University, Beijing, China

Three-Dimensional Aerodynamic Optimi-zation of a Multi-Stage Axial Compressor GT2016-57626 Tao Ning, Chunwei Gu, Tsinghua University, Bei-

jing, China, Xiao-tang Li, Taiqiu Liu, Shenyang Engine Design and Research Institute, Shenyang, China

3:00

A 3D Approximate Riemann Solver for the Euler Equations Using Flux Splitting Schemes With a Robust Multigrid GT2016-56057 Hong-Sik Im, Honeywell, Torrance, CA, United

States

Investigation of Vaned Diffuser Splitters on the Performance of a and Flow Control High Pressure Ratio Centrifugal Compres-sor GT2016-56255 Xiao He, Xinqian ZHENG, Jie Wei, Hanxuan

Zeng, Tsinghua University, Beijing, China

Flow Characteristics of an Optimized Axi-al Compressor Rotor Using Smooth Design Parameters GT2016-57028 Syed Moez Hussain Mahmood, Mark Turner,

Kiran Siddappaji, University of Cincinnati, Cin-cinnati, OH, United States

3:30

3D Viscous Inverse Design of Turboma-chinery Using One-Equation Turbulence Model GT2016-56332 Jinguang Yang, Yan Liu, Xiaofang Wang,

Dalian University of Technology, Dalian, Lia-oning, China, Hu Wu, Northwestern Polytech-nical University, Xi’an, Shaan’xi, China

Experimental Study on the Effect of Diffus-er Vane Setting Angle on Centrifugal Com-pressor Performance GT2016-56732 Hideaki Tamaki, IHI Corporation, Yokohama,

Japan

Inverse Design of Axial-Flow Compressor Blades Using Elastic Surface Algorithm in Subsonic and Transonic Flow Regimes With Separation GT2016-56717 Mohammad Hossein Noorsalehi, Isfahan Uni-

versity of Technology, Isfahan, Iran, Mahdi Nili-Ahamadabadi, Isfahan University of Tech-nology, Esfahan, Iran, Ebrahim Shirani, Foolad Institute of technology, Isfahan, Iran, Maryam Safari, Isfahan University of Technology, Isfah-an, Iran

4:00

3D CFD Compressor Map Computation of a Multi-Stage Axial Compressor With Off-Design Adjusted Rotor Geometries GT2016-56745 Christian Janke, Rolls-Royce Deutschland,

Blankenfelde-Mahlow, Dahlewitz, Germa-ny, Ivo Martin, Lilia Gaun, Dieter Bestle, Brandenburg University of Technology Cott-bus-Senftenberg, Cottbus, Germany, Markus Goller, Rolls-Royce Deutschland Ltd. & Co. KG, Blankenfelde-Mahlow, Dahlewitz, Germany

Area-Schedule Based Design of High Pres-sure Recovery Radial Diffusion Systems GT2016-57044 Ruhou Gao, Zoltan Spakovszky, Mass Inst of

Tech, Cambridge, MA, United States, Daniel Rus-ch, ABB Turbo Systems Ltd, Baden, Switzerland, René Hunziker, ABB Turbo Systems, Baden, Swit-zerland

4:30

Study of Geometric Parameter Influence on Fishtail Pipe Diffuser Performance GT2016-57404 Ge Han, Xingen Lu, Yanfeng Zhang, Shengfeng

Zhao, Chengwu Yang, Junqiang Zhu, Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing, Beijing, China

Optimization of Robust Transonic Com-pressor Blades GT2016-57236 Marcus Lejon, Niklas Andersson, Chalmers Uni-

versity of Technology, Gothenburg, Sweden, Lars Ellbrant, Hans Mårtensson, GKN Aerospace, Trollhattan, Sweden, Tomas Grönstedt, Chalm-ers University, Gothenburg, Sweden

5:00

Comparison of Different Numerical Approaches for Determination of Com-pressible Fluid Flow in Narrow Gaps GT2016-57898 Alexander Kefalas, Friedrich-Karl Benra, Di-

eter Brillert, Hans Josef Dohmen

Radial Stages with Non-Uniform Pressures at Diffuser Inlet GT2016-57956 David Japikse, Concepts NREC, White River

Junction, VT, United States, Eric Krivitzky, Con-ceptsNREC, White River Junction, VT, United States

Geometric Modeling and Analysis for Gooseneck GT2016-56275 Qiuye Tu, Dongdong Zhang, Jie Chen, Yuanhu

Cai

FINAL PROGRAM | 83

TUESDAY, JUNE 14 2:30 - 5:30 PM

WIND ENERGY

Vertical Axis Wind Turbines

Paper Session • Room 308A • TC-46-2

Session Chair: Jaikumar Loganathan, GE Global ResearchSession Co-Chair: Abolfazl Pourrajabian, K N Toosi Univ of Technology

2:30

Computational Investigation of a Shrouded Vertical Axis Wind Turbine GT2016-56190 Antonios Tourlidakis, University of Western

Macedonia, Nea Michaniona, Kozani, Greece, Kyriakos Vafiadis, Harris Fintikakis, Ioan-nis Zaproudis, University of Western Macedo-nia, Kozani, Kozani, Greece

3:00

Effects of Airfoil’s Polar Data in the Stall Region on the Estimation of Darrieus Wind Turbine Performance GT2016-56685 David Marten, George Pechlivanoglou, Chris-

tian Navid Nayeri, Christian Oliver Pasche-reit, Alessandro Bianchini, Francesco Bal-duzzi, Giovanni Ferrara, Lorenzo Ferrari

3:30

Aerodynamics of Darrieus Wind Tur-bines Airfoils During Start-Up GT2016-57679 Alessandro Bianchini, Univ of Florence, Firenze,

Italy, Francesco Balduzzi, University of Flor-ence, Florence, Italy, Giovanni Ferrara, Univ Of Florence, Florence 50139, Italy, Lorenzo Ferrari, National Research Council of Italy, Sesto Fioren-tino (FI), Italy

4:00

Influence of the Blade-Spoke Connec-tion Point on the Aerodynamic Perfor-mance of Darrieus Wind Turbines GT2016-57667 Alessandro Bianchini, Univ of Florence, Firenze,

Italy, Francesco Balduzzi, University of Flor-ence, Florence, Italy, Giovanni Ferrara, Univ Of Florence, Florence 50139, Italy, Lorenzo Ferrari, National Research Council of Italy, Sesto Fioren-tino (FI), Italy

4:30

Three-Dimensional Character of VAWT Wakes: An Experimental Investigation for H-Shaped and Troposkien Architectures GT2016-57762 Giacomo Persico, Vincenzo Dossena, Berardo

Paradiso, Politecnico Di Milano, Milano, Italy, Lorenzo Battisti, Università di Trento, Povo (TN), Italy, Alessandra Brighenti, Enrico Be-nini, Università di Trento, Trento, Italy

5:00

Design and performance evaluation of an economical vertical axis wind tur-bine GT2016-56338 Abdelghani Himri, ENSEEIHT, Toulouse,

France, Emil Göttlich, Graz University of Technology, Graz, Austria

84 | ASME 2016 TURBO EXPO

WEDNESDAY, JUNE 15 9:00 - 10:30 AM

COAL, BIOMASS & ALTERNATIVE FUELS

COMBUSTION, FUELS & EMISSIONS

COMBUSTION, FUELS & EMISSIONS

Biomass and Coal Combustion Modeling: Model Development

Combustion Dynamics: High-frequency Instabilities

Paper Session • Room E6 • WA- 3-1 Paper Session • Room 317C • WA-4-22 Paper Session • Room E3 • WA-4-33

Session Chair: Domenico Borello, Univer-sità di Roma SapienzaSession Co-Chair: Yuxin Zhang, GE Glob-al Research

Session Chair: Michael Duesing, ANSALDO ENERGIASession Co-Chair: A. C. Benim, Duesseldorf University of Applied Sciences

Session Chair: Lipika Kabiraj, Chair of Fluid Dynamics, ISTA, TU BerlinSession Co-Chair: Aditya Saurabh, Institut Für Strömungsmechanik Und Technische Akustik

9:00

Review of Coal-to-Synthetic Natural Gas (SNG) Production Methods and Modeling of SNG Production in an En-trained-Flow Gasifer GT2016-57857 Xijia Lu, Ting Wang, University of New Orle-

ans, New Orleans, NC, United States

Assessment of Scale Resolved CFD Meth-ods for the Investigation of Lean Burn Spray Flames GT2016-57143 Antonio Andreini, Davide Bertini, Lorenzo Maz-

zei, Stefano Puggelli, University of Florence, Flor-ence, Italy

Low-Order Modeling of Nonlinear High-Frequency Transversal Thermoa-coustic Oscillations in Gas Turbine Com-bustors GT2016-57913 Tobias Hummel, Klaus Hammer, Pedro Romero,

Technische Universitaet Muenchen, Garching, Germany, Bruno Schuermans, GE Power, Baden, Switzerland, Thomas Sattelmayer, Technical Univ Munich, Garching, Germany

9:30

Externally Fired Gas Turbine: Layout Optimization for Micro CHP Generation With Residual Biomass Firing GT2016-57969 mauro zampilli, University of Perugia - Dep.

of Engineering, perugia, Italy, Gianni Bidini, Univ Di Perugia, Perugia 06125, Italy, Paolo Laranci, University of Perugia - Dep. of Engi-neering, Perugia, Italy, Francesco Fantozzi, University of Perugia, Dip. Ingegneria Indus-triale, Perugia, Italy

Investigation of Single Jet Combustor Us-ing Flamelet Generated Manifold Combus-tion Model and Detailed Chemistry GT2016-57986 Sunil Patil, ANSYS Inc, Ann Arbor, MI, United

States, Joseph Meadows, Siemens Energy, Inc., Charlotte, NC, United States, Judy Cooper, ANSYS Inc., Waterloo, ON, Canada, Richard Valdes, Sie-mens Energy, Inc., Orlando, FL, United States, Ste-fano Orsino, ANSYS, Lebanon, NH, United States, Walter R. Laster, Siemens Energy, Orlando, FL, United States

High-Frequency Thermoacoustic Modula-tion Mechanisms in Swirl-Stabilized Gas Turbine Combustors: Part Two: Modeling and Analysis GT2016-57500 Tobias Hummel, Technische Universitaet

Muenchen, Garching, Germany, Frederik M. Berger, Technical University of Munich, Garch-ing, Germany, Michael Hertweck, Technische Universitaet Muenchen, Garching, Germany, Bruno Schuermans, GE Power, Baden, Switzer-land, Thomas Sattelmayer, Technical Univ Mu-nich, Garching, Germany

10:0

0

The Potential for Gasification to Reduce CO2 Emissions in Coal Power Generation GT2016-58153 Jeffrey N. Phillips, Electric Power Research

Institute, Charlotte, NC, United States, George Booras, EPRI, Palo Alto, CA, United States

“Parallelized Automated, Predictive, Im-print Cooling Model for Combustor Liners” GT2016-56187 Alejandro Briones, University of Dayton Re-

search Institute, Dayton, OH, United States, Brent Rankin, Air Force Research Laboratory, Dayton, OH, United States, Scott Stouffer, Universty of Dayton Research Institute, Dayton, OH, United States, Timothy Erdmann, David Burrus, Innova-tive Scientific Solutions, Inc., Dayton, OH, United States

High Frequency Thermoacoustic Modula-tion Mechanisms in Swirl-Stabilized Gas Turbine Combustors: Part One: Experi-mental Investigation of Local Flame Re-sponse GT2016-57583 Frederik M. Berger, Technical University of

Munich, Garching, Germany, Tobias Hummel, Michael Hertweck, Technische Universitaet Muenchen, Garching, Germany, Jan Kaufmann, Technical University of Munich, Garching, Ger-many, Bruno Schuermans, GE Power, Baden, Switzerland, Thomas Sattelmayer, Technical Univ Munich, Garching, Germany

FINAL PROGRAM | 85

WEDNESDAY, JUNE 15 9:00 - 10:30 AM

CYCLE INNOVATIONS HEAT TRANSFER: CONJUGATE HEAT TRANSFER

HEAT TRANSFER: NUMERICAL FILM COOLING

ORC & mGT Novel Cycles Conjugate Methods For Gas Turbine Applications Numerical Film Cooling II

Paper Session • Room 317A • WA-6-2 Paper Session • Room 301 •WA-10-3 Paper Session • Room 307A • WA-12-2

Session Chair: Kihyung Kim, GE Power and WaterSession Co-Chair: Mariam Mahmood, University of Genoa

Session Chair: Robert Proctor, GE AviationSession Co-Chair: Sergio Lavagnoli, Von Karman Inst for Fluid Dynamics

Session Chair: Thomas Dyson, GE Global Research, NiskayunaSession Co-Chair: Cengiz Camci, Penn State University

9:00

Introduction of a New Numerical Sim-ulation Tool to Analyze Micro Gas Tur-bine Cycle Dynamics GT2016-56335 Martin Henke, German Aerospace Centre

(DLR), Stuttgart, Germany, Thomas O. Monz, German Aerospace Center (DLR e.V.), Stutt-gart, Germany, Manfred Aigner, German Aerospace Center (DLR), Institute of Combus-tion Technology, Stuttgart, Germany

Analysis of Conjugate Heat Transfer Be-tween Cooling Film and Thermal Barrier Coatings Based on Micro-Structure GT2016-56298 Yuzhang Wang, Jiali Li, Hongzhao Liu, Yiwu

Weng, Shanghai Jiao Tong University, Shanghai, China

Influence of Jet Impingement Configura-tions and Aerothermal Variables on Film Cooling GT2016-57480 Xing Yang, Xi’An Jiaotong University, Shaanxi,

China, Zhao Liu, Xi’an Jiaotong University, Xi’An, China, Zhansheng Liu, Bin Wu, Xi’an Ji-aotong Univeristy, Xi’an, Shaanxi, China, Zhen-ping Feng, Xi’an Jiaotong University, Shaanxi, Shaanxi, China

9:30

Exhaust Gas Recirculation on Humidi-fied Flexible Micro Gas Turbines for Car-bon Capture Applications GT2016-57265 Ward De Paepe, Marina Montero Carrero,

Vrije Universiteit Brussel, Brussels, Belgium, Simone Giorgetti, Université Libre de Brux-elles, Brussel, Belgium, Svend Bram, Vrije Universiteit Brussel, Brussels, Belgium, Ales-sandro Parente, Universite Libré de Bruxelles, Brussels, Belgium, Francesco Contino, Vrije Universiteit Brussel, Brussels, Belgium

Conjugate Heat Transfer of a Gas Turbine With Hub and Shroud Cavity Flow GT2016-56382 Yuge An, Beihang Univ., Schl of Energy and Pwr

Eng., Beijing, Beijing, China, Huoxing Liu, Beihang university, Beijing, China

An Innovative Approach to Model Tem-perature Influence on Particle Deposition in Gas Turbines GT2016-57997 Paolo Venturini, Dipartimento di Meccanica e

Aeronautica, ‘Sapienza, Roma, Italy, Domenico Borello, Università di Roma Sapienza, Rome, It-aly, Franco Rispoli, Sapienza University of Rome, Rome, Italy, G. Agati, ‘sapienza’ University Of Rome, Rome, RM, Italy

10:0

0

Experimental Characterisation of a Hu-midified T100 Micro Gas Turbine GT2016-57649 Marina Montero Carrero, Ward De Paepe,

Vrije Universiteit Brussel, Brussels, Belgium, Jan Magnusson, Ecergy AB, Morarp, Sweden, Svend Bram, Vrije Universiteit Brussel, Brus-sels, Belgium, Alessandro Parente, Universite Libré de Bruxelles, Brussels, Belgium, Frances-co Contino, Vrije Universiteit Brussel, Brus-sels, Belgium

Large Eddy Simulation of Conjugate Heat Transfer Around a Multi-Perforated Plate With Deviation GT2016-56442 Dorian Lahbib, TURBOMECA-CERFACS, Bordes,

France, Antoine Dauptain, Florent Duchaine, CERFACS, Toulouse, France, Franck Nicoud, Uni-versité de Montpellier 2, Montpellier, France

Effects of Oscillations in the Main Flow due to Thermo Acoustic Fields in a Gas Turbine Combustor on Film Cooling GT2016-56402 Seung Il Baek, Pennsylvania State University,

University Park, PA, United States, Savas Yavuz-kurt, Dept. of Mech. and Nuc. Engr./Pennsylva-nia State University, University Park, PA, United States

86 | ASME 2016 TURBO EXPO

WEDNESDAY, JUNE 15 9:00 - 10:30 AM

HEAT TRANSFER:EXPERIMENTAL INTERNAL

COOLING

MANUFACTURING MATERIALS & METALLURGY OIL & GAS APPLICATIONS

Experimental Internal Cooling: Ribbed Channels

Scholarly Lecture on Welding and Brazing Technologies

System Integration and Operation

Paper Session • Room 307B • WA-16-4 Tutorial Session • Room 402 • WA-21-9 Paper Session • Room 401 • WA-24-7

Session Organizer: Karen Thole, Pennsyl-vania State UnivSession Co-Organizer: Lesley Wright, Baylor University

Session Chair: Paul Lowden, Liburdi Turbine Services

Session Chair: Klaus Brun, Southwest Re-search Institute

9:00

Heat Transfer and Flow Characteristics of Two-Pass Parallelogram Channels WithAttached and Detached Transverse Ribs GT2016-56198 Tong Miin Liou, National Tsing Hua Univsity,

Hsinchu, Taiwan, Shyy Woei Chang, Nation-al Kaohsiung Marine University, Kaohsiung, Taiwan, Yi-An Lan, NTHU, Kaohsiung City, Taiwan, Shu-Po Chan, National Tsing Hua University, Xinfeng Township Hsinchu, Tai-wan, YUSHUAI LIU, Imperial College, London, United Kingdom

Scholarly Lecture on Welding and Brazing Technologies GT2016-58288 Warren Miglietti, ProEnergy, Sedalia, MO, United

States

Gas Turbine Operation Offshore: Increased Operating Interval and Higher Engine Per-formance Through Optimized Intake Air Filter System GT2016-56066 Stian Madsen, Statoil, Stavanger, Norway, Lars

Eirik Bakken, Norwegian Univ Of Sci & Tech, Trondheim, Norway

9:30

Experimental Study of Heat Transfer in a Converging Duct With Ribs GT2016-56422 Wei-jiang Xu, Pei-yao Zhang, Xiao-fei Ma,

Northwest Polytechnical University, Xi'an, Shaanxi Province, China, Hui-ren Zhu, Li Zhang, Northwestern Polytechnical Universi-ty, Xi’an, China

Two years of improvement and experience in PEMS for gas turbines GT2016-56138 Francis Bainier, Grtgaz, Bois Colombes, France,

Pascal Alas, GRT Gaz, Bois-Colombe, France, Tony Pillay, Galéo, Cluis, France, Florian Morin, GRTgaz, Bois Colombes, France

Successful start-up and operation of 3 Pro-pylene Boil-off gas compressorsTechnical Presentation Only. GT2016-56427 Joppu Thomas, ADNOC, ABUDHABI, ., United

Arab Emir.

10:0

0

Aerothermal Investigation of the Flow and Heat Transfer in a Helically Corru-gated Cooling Channel GT2016-57606 Ignacio Mayo, Bogdan C. Cernat, Marco Vir-

gilio, von Karman Institute for Fluid Dynam-ics, Rhode Saint Genese, Belgium, Tony Arts, Von Karman Inst, Rhode St Genese, Belgium, Alessio Pappa, Von Karman Institute For Flu-id Dynamics, Rhode Saint Genese, Belgium

Coordinated Operation of Centrifugal Compressors in Series via Model Predic-tive Control GT2016-57961 Mehmet Mercangöz, ABB Corporate Research,

Baden-Dättwil, Aargau, Switzerland, Andrea Ste-fani, Maserati, Modena, Italy, Andrea Cortino-vis, ABB Corporate Research, Baden, Switzerland

T

U

T

O

R

I

A

L

FINAL PROGRAM | 87

WEDNESDAY, JUNE 15 9:00 - 10:30 AM

OIL & GAS APPLICATIONS STEAM TURBINES STRUCTURES & DYNAMICS: PROBABILISTIC METHODS

Compression System Dynamics Steam Turbine Seals Probabilistic Method Developments

Tutorial Session • Room E5 • WA-24-13 Paper Session • Room E2 • WA-26-6 Tutorial Session • Room 308B • WA-29-2

Session Chair: Rainer Kurz, Solar Tur-bines IncorporatedSession Co-Chair: Jeff Moore, Southwest Research Institute,Klaus Brun, Southwest Research Institute

Session Chair: Alexander Stein, GE Energy InfrastructureSession Co-Chair: Grant Ingram, Durham University, Durham

Session Chair: Michael Gorelik, FAASession Co-Chair: Liping Wang, GE Corpo-rate Res & Develop

9:00

Experimental and Numerical Development of a Dynamic Clearance Seal for Steam Tur-bine Application GT2016-56995 Andrew Messenger, Richard Williams, Grant

Ingram, Durham University, Durham, United Kingdom, Simon Hogg, School of Engineering, Durham, United Kingdom, Stacie Tibos, GE Pow-er, Rugby, United Kingdom, Jon Seaton, GE Power, Steam Power Systems, Rugby, United Kingdom, Bernard Charnley, GE Power, Steam Power Sys-tems, Warwickshire, United Kingdom

Demystify Gradient-Enhanced Kriging Em-ulation in Uncertainty QuantificationTechnical Presentation Only. GT2016-58069 Peter Qian, University of Wisconsin-Madison,

Madison, WI, United States

9:30

Influence of Shroud Seal Dimensions on Aerodynamic Performance of Steam Tur-bine Stages: Part I - Honeycomb Seal GT2016-56917 Xin Yan, Xiuxiu Chen, Kun He, Xi’an Jiaotong

University, Xi’an, Shaanxi Province, China

Bayesian uncertainty analysis of the me-dian rank regression method for analysing right-censored dataTechnical Presentation Only. GT2016-57096 Nicholas Armstrong, Aerospace Division, Fisher-

man’s Bend, Victoria, Australia

10:0

0

Influence of Shroud Seal Dimensions on Aerodynamic Performance of Steam Tur-bine Stages: Part II Hole-Pattern Seal GT2016-56921 Xin Yan, Xiuxiu Chen, Kun He, Xi’an Jiaotong

University, Xi’an, Shaanxi Province, China

A probabilistic comparison of turbine blade failure data from two independent aircraft fleetsTechnical Presentation Only. GT2016-57097 Nicholas Armstrong, Glen Rowlinson, Aerospace

Division, Fisherman’s Bend, Victoria, Australia, Ross A. Antoniou, DST Group, Fishermans Bend, Victoria, Australia

T

U

T

O

R

I

A

L

88 | ASME 2016 TURBO EXPO

WEDNESDAY, JUNE 15 9:00 - 10:30 AM

STRUCTURES & DYNAMICS: ROTORDYNAMICS

STRUCTURES & DYNAMICS: STRUCTURAL MECHANICS,

VIBRATION & DAMPING

TURBOMACHINERY: AXIAL FLOW FAN & COMPRESSOR

AERODYNAMICS

Bearings - Modeling & Validation 3 Dynamics of Bladed Disks Multistage Compressors

Paper Session • Room 300 • WA-31-11 Paper Session • Room 307C • WA-32-7 Paper Session • Room 318C • WA-37-8

Session Chair: Martin Conlon, National Research Council CanadaSession Co-Chair: Ilmar Ferreira Santos, Technical University of Denmark

Session Chair: Alain Batailly, École Poly-technique de MontréalSession Co-Chair: Muzio Gola, Politecnico di Torino

Session Chair: Lisa Brilliant, UTC/Pratt & WhitneySession Co-Chair: Matthew Bennington, Pratt & Whitney

9:00

The Influence of Hydrodynamic Bearing Configuration on Morton Effect GT2016-56654 Xiaomeng Tong, Alan Palazzolo, Texas A&M

University, College Station, TX, United States

Automated Mode Identification of Airfoil Geometries to Be Used in an Optimization Process GT2016-56987 Ivo Martin, Dieter Bestle, Brandenburg Univer-

sity of Technology Cottbus-Senftenberg, Cottbus, Germany

Experimental Investigation of Aspiration in a Multi-Stage High-Speed Axial-Com-pressor GT2016-56440 Jan Siemann, Gottfried Wilhelm Leibniz Uni-

versitaet Hannover, Hannover, Germany, Ingolf Krenz, MTU Aero Engines AG, Munich, Germany, Joerg Seume, Gottfried Wilhelm Leibniz Universi-taet, Hannover, Germany

9:30

Design of Hybrid Hydrostatic/Hydro-dynamic Journal Bearings for Optimum Self-Compensation Under Misaligning External Loads GT2016-58125 Luis Fernando Martinez Esparza, Embry Rid-

dle Aeronautical University-Worldwide, Chin-le, AZ, United States, Jaime Cervantes de Gor-tari, National University of Mexico, Mexico City, Mexico, Enrique Chicurel Uziel, National University of Mexico, Distrito Federal, Mexico

Rational Design of Gas Turbine Engine Compressor to Provide the Required Dy-namic Strength Level of Rotor Blades GT2016-56991 Daria Kolmakova, Grigorii Popov, Aleksandr

Shklovets, Aleksandr Ermakov, Samara State Aerospace University, Samara, Russia

Influence of Tip Clearance on the Perfor-mance and Matching of Multistage Axial Compressors GT2016-56232 Xinqian ZHENG, Heli Yang, Tsinghua University,

Beijing, China

10:0

0

Design and Calibration of a Full Scale Active Magnetic Bearing Based Test Fa-cility for Investigating Rotordynamic Properties of Turbomachinery Seals in Multiphase Flow GT2016-57893 Andreas Jauernik Voigt, Christian Man-

drup-Poulsen, Technical University of Den-mark, Kgs. Lyngby, 2800, Denmark, Kenny Krogh Nielsen, Lloyds Register Consulting, Hellerup, Denmark, Ilmar Ferreira San-tos, Technical University of Denmark, Kgs. Lyngby, Denmark

Mechanical Integrity and Design Analy-sis Suite (MIDAS): A Tool for Rapid Finite Element Analysis (FEA) of Steam Turbine Blades GT2016-57641 Periklis Lolis, Trevor Brown, Cesare Guardino,

GE Power, Rugby, Warwickshire, United Kingdom, Jonathan Henson, GE Power, Stafford, United Kingdom

Influence of Rotor Tip Flow Field Mis-Pre-diction on Rotating Disturbance Near Surge in a High Speed Multistage Compres-sor GT2016-57372 Johannes Schreiber, LMFA - Ecole Centrale de

Lyon - Centrale Innovation, LYON, France, Xavi-er Ottavy, CNRS - LMFA, Ecully, France, Ghis-laine Ngo Boum, Ecole Centrale de Lyon-LMFA, Ecully, France, Nicolas Gourdain, ISAE, Aerody-namics, Energetic and Propulsion Department, Toulouse CEDEX 4, France

FINAL PROGRAM | 89

WEDNESDAY, JUNE 15 9:00 - 10:30 AM

TURBOMACHINERY: AXIAL FLOW TURBINE

AERODYNAMICS

TURBOMACHINERY: DESIGN METHODS & CFD MODELING FOR

TURBOMACHINERY

TURBOMACHINERY: DUCTS & COMPONENT INTERACTIONS

Turbine Cascade Aerodynamics Compresor Methods and Applications Fan and Compressor Noise

Paper Session • Room 327 • WA-38-10 Paper Session • Room E4 • WA-39-13 Paper Session • Room 403 • WA-41-2

Session Chair: Shankar Magge, Pratt and WhitneySession Co-Chair: Chao Zhou, Peking University

Session Chair: Michael Hathaway, NASA Glenn Research CenterSession Co-Chair: Garth V. Hobson, Naval Postgraduate School

Session Chair: Andreas Peters, GE AviationSession Co-Chair: Claudio Lettieri, TU Delft

9:00

Influence of Trailing Edge Coolant Ejec-tion Rate and Cut-Back Length on Ener-gy Loss and Shockwave Intensity of a Transonic Turbine Blade GT2016-56859 Yufeng Wang, Xun Zhou, Harbin Institute

of Technology, Harbin, Heilongjiang, China, Xun Liu, Department of gas turbine, NO.703 research institute of CSIC, Harbin, Heilongji-ang, China, Songtao Wang, Harbin Institute of Technology, Harbin, Heilongjiang, China

Computational Analysis of Compressor Blade Erosion in a Wet Compression System GT2016-57055 Palanikumar Chidambaram, Tae-Hoon Song,

In-Won Kim, Kwon-Hee Lee, FMTRC, Daejoo Ma-chinery Co Ltd.,, Daegu, Korea (Republic), Heuy-Dong Kim, Andong National Univeristy, Andong, Korea (Republic)

Numerical Investigation of the First Boost-er Stage Tone Noise of a High Bypass Ratio Turbofan GT2016-57352 Anton Rossikhin, Victor Mileshin, Sergey Pan-

kov, Central Institute of Aviation Motors, Mos-cow, Russia

9:30

Experimental Investigation on the An-nular Sector Cascade of a High End-wall-Angle Turbine GT2016-57392 Weiliang Fu, Harbin Engineering University,

Harbin/Heilongjiang, China, Jie Gao, Harbin Engineering University, Harbin, China, Chen Liang, Harbin Marine Boiler and Turbine Re-search Institute, Harbin/Heilongjiang, China, Fukai Wang, Qun Zheng, Endong Zhou, Har-bin Engineering University, Harbin/Heilongji-ang, China

Correlation-Based Riblet Model for Tur-bomachinery Applications GT2016-56293 Viktor Köpplin, Leibniz Universität Hannover,

Hannover, Germany, Florian Herbst, Gottfried Wilhelm Leibniz Universitaet Hannover, Han-nover, Niedersachsen, Germany, Joerg Seume, Gottfried Wilhelm Leibniz Universitaet, Han-nover, Germany

Analysis of the Sources and the Modal Con-tent of the Acoustic Field in a Radial Com-pressor Outflow GT2016-57405 Marius Banica, Peter Limacher, ABB Tur-

bo Systems AG, Baden, Aargau, Switzerland, Heinz-Juergen Feld, ABB Turbo Systems Ltd, Baden, Aargau, Switzerland

10:0

0

Experimental Investigation of Effects of Rim Sealing Flow on the Flow Field in a Turbine Cascade Passage With Different Rim Seal Configurations GT2016-56848 Lixiang Wang, Hongwei Ma, Beihang Univer-

sity, Beijing, China, Jinghui Zhang, Xi’an Aero-space Propulsion Institute, Xi’an, China

A New Three-Dimensional Viscous Inverse Design Method for Axial Compressor Blade GT2016-56477 Zhaowei Liu, Hu Wu, Northwestern Polytechnical

University, Xi’an, China

Numerical and Experimental Investiga-tion of Noise Radiation for Double-Suction Centrifugal Fans of Air-Conditioner In-door Unit GT2016-56773 Xifeng Zhao, Hisense Air-conditoner R&D Cen-

ter, Hisense (Shandong) Air-conditoner Co. Ltd., Qingdao, China, jinju sun, xi’an jiaotong univ, xian, China, Youwei He, xian jiaotong uinv, xian, China, Kang Lin, xian Jiaotong Univ., xian, China

90 | ASME 2016 TURBO EXPO

WEDNESDAY, JUNE 15 9:00 - 10:30 AM

TURBOMACHINERY: RADIAL TURBOMACHINERY

AERODYNAMICSWIND ENERGY

Radial Compressors - Performance Optimization (II)

Wind Turbine Design and Optimization

Paper Session • Room E1 • WA-42-4 Paper Session • Room 308A • WA-46-6

Session Chair: Hideaki Tamaki, IHI Cor-porationSession Co-Chair: Peter Harley, IHI Charging Systems

Session Chair: George Pechlivanoglou, HFI TU BerlinSession Co-Chair: Aya Diab, Faculty of Engi-neering - Ain Shams University

9:00

Numerical Investigation of the Effect of Diffuser and Volute Design Parameters on the Performance of a Centrifugal Compressor Stage GT2016-57057 Lei Yu, United Technologies Research Cen-

ter (China), Shanghai, China, William Cous-ins, United Technologies Research Center, Glastonbury, CT, United States, Feng Shen, United Technologies Research Center [Chi-na] Ltd., Shanghai, Shanghai, China, Georgi Kalitzin, United Technologies Research Cen-ter, East Hartford, CT, United States, Vishnu Sishtla, UTC Climate Controls & Security, Manlius, NY, United States, Om Sharma, Unit-ed Technologies Research Center, East Hart-ford, CT, United States

Strategic Blade Shape Optimization for Aerodynamic Performance Improvement of Wind Turbine GT2016-56836 Youjin Kim, Institute of Fluid Mechanics, FAU

Erlangen-Nuernberg, Erlangen, Germany, Ali Al-Abadi, Institute of Fluid Mechanics/ FAU Er-langen-Nuernberg, Erlangen, Germany, Antonio Delgado, Institute of Fluid Mechanics, FAU Erlan-gen-Nuernberg, Erlangen, Germany

9:30

NUMERICAL INVESTIGATION OF THE FLOW FIELD AND AERODYNAMIC LOAD ON IMPELLERS IN CENTRIFU-GAL COMPRESSOR WITH DIFFERENT RADIAL INLETS GT2016-57180 jianchi xin, Xiaofang Wang, Lusheng Zhou,

Dalian University of Technology, Dalian, Chi-na, zhong ye, Hangzhou steam turbine LTD, hangzhou, China, Haitao Liu, Dalian Univer-sity of technology, Dalian, Not Applicable, China

Design Optimization of a Utility Scale Wind Turbine Blade Using a Genetic Algorithm GT2016-57867 Aya Diab, Khaled Yassin, Zakaria Ghoneim, Ain

Shams University, Cairo, Egypt

10:0

0

Flow Characteristics of a Novel Centrif-ugal Compressor Design GT2016-58103 Shashank Mishra, Shaaban Abdallah, Mark

Turner, University of Cincinnati, Cincinnati, OH, United States

FINAL PROGRAM | 91

WEDNESDAY, JUNE 15 10:45AM - 12:45 PM

AIRCRAFT ENGINE COMBUSTION, FUELS & EMISSIONS

COMBUSTION, FUELS & EMISSIONS

Simulation and Validation Combustor Design & Development I

Combustion Dynamics: Basic Mechanisms

Paper Session • Room 318B • WB-1-6 Paper Session • Room E3 • WB-4-11 Paper Session • Room E5 • WB-4-17

Session Chair: Theoklis Nikolaidis, Cran-field UniversitySession Co-Chair: Syed Khalid, Gas Tur-bine Systems Solutions, LLC

Session Chair: Fulvio Magni, GE Power, BadenSession Co-Chair: Federico Bonzani, Ansaldo Sviluppo Energia

Session Chair: Christoph Hirsch, TU MünchenSession Co-Chair: Holger Streb, Siemens Power

10:4

5

Virtual Gas Turbine: Pre-Processing and Numerical Simulations GT2016-56227 Feng Wang, Imperial College London, London,

United Kingdom, Mauro Carnevale, Imperial College of London, London, United Kingdom, Gan Lu, Imperial College London, London, United Kingdom, Davendu Kulkarni, Rolls-Royce plc, Derby, United Kingdom, Luca Di Mare, Imperial College, London, United King-dom

Experimental Study of the Interaction of Water Sprays With Swirling Premixed Nat-ural Gas Flames GT2016-56158 Stephan Lellek, TU Munich - Lehrstuhl für Ther-

modynamik, Garching, Bayern, Germany, Chris-toph Barfuß, TUM - Lehrstuhl für Thermodyna-mik, Garching, Germany, Thomas Sattelmayer, Technical Univ Munich, Garching, Germany

The Effect of Chevrons on the Primary and Secondary Swirlers on the Dynamic Be-havior of the Flow Generated by a Count-er-Rotating Radial-Radial Swirler GT2016-56622 Sheng-Chieh Lin, Wessam Estefanos, James

Brennan, Samir Tambe, San-Mou Jeng, Univer-sity of Cincinnati, Cincinnati, OH, United States

11:1

5

A Noise Assessment Framework for Subsonic Aircraft and Engines GT2016-58012 Fakhre Ali, Chalmers University of Technolo-

gy, Gothenburg, GOT, Sweden, Lars Ellbrant, GKN Aerospace, Trollhattan, Sweden, Tomas Grönstedt, Chalmers University, Gothenburg, Sweden, David Elmdahl, Chalmers University of Technology, Gothenburg, Sweden

Experimental Investigation of Spray and Combustion Performances of a Fuel-Staged Low Emission Combustor: Part I: Effects of Main Swirl Angle GT2016-56530 Cunxi Liu, Fuqiang Liu, Jinhu Yang, Yong Mu,

Chunyan Hu, Gang Xu, Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing, China

Role of Shear Layer Instability in Driving Pressure Oscillations in a Backward Fac-ing Step Combustor GT2016-57322 Srinivas K. Kirthy, Indian Institute of Science,

Bangalore, Karnataka, India, Seunghyuck Hong, Combustion Systems Organization, Aero-Ther-mal & Mechanical Systems, GE Global Research, New York, NY, United States, Santosh Shan-bhogue, Massachusetts Institute of Technology, Cambridge, MA, United States, Ahmed Ghoniem, Massachusetts Inst Of Technology, Cambridge, MA, United States, Santosh Hemchandra, Indian Institute of Science, Bangalore, India

11:4

5

Sensitivity Analysis and Experimental Validation of Transient Performance Predictions for a Short-Range Turbofan GT2016-57257 Maria Valentina Culmone, AIRBUS OPERA-

TIONS SAS / ISAE, Toulouse, France, Nicolas García Rosa, Institut Supérieur de l'Aéronau-tique et de l'Espace, Toulouse, France, Xavier Carbonneau, ISAE, Toulouse, France

Demonstration Plant and Combustion Sys-tem for an Oxy-Fuel Gas Turbine Cycle GT2016-57142 Inge Saanum, Mario Ditaranto, Alessandro

Schönborn, SINTEF Energy research, Trondheim, Norway, Jacek Janczewski, Siemens Industrial Turbomachinery AB, Finspång, Sweden

Unsteady Heat Release of Stratified Swirl-ing Flames in a Partially Premixed Pre-Va-porized Combustor GT2016-57061 Jing Wang, Xin Hui, Hao Qin, chi zhang, Yuzhen

Lin, Beihang University, Beijing, China

12:15

Numerical Simulation of Pollutant Emission of a Turbojet Engine With Wa-ter Injection GT2016-57074 Lanxin Sun, Tao Sun, Harbin Engineering

University, Harbin, Heilongjiang, China, Yan-min Wang, Harbin Institute of Technology, Harbin, Heilongjiang, China, Wen Yang, Har-bin Engineering University, Harbin, Heilongji-ang, China

Flame Stabilization and Emission Charac-teristics of a Prototype Gas Turbine Burner at Atmospheric Conditions GT2016-57336 Atanu Kundu, Lund Universitet, SKANE, Sweden,

Arman Ahamed Subash, Robert Collin, Lund Uni-versity, Lund, Skane, Sweden, Jens Klingmann, Lund Universitet, Lund, Sweden

On Generation of Entropy Waves by a Pre-mixed Flame GT2016-57026 Lin Strobio Chen, Thomas Steinbacher, Tech-

nische Universitaet Muenchen, Garching bei München, Bayern, Germany, Camilo F. Silva, Technische Universität Muenchen, Garching bei München, Bayern, Germany, Wolfgang Polifke, Technische Universität München, Garching, Ger-many

92 | ASME 2016 TURBO EXPO

WEDNESDAY, JUNE 15 10:45AM - 12:45 PM

COAL, BIOMASS & ALTERNATIVE

FUELS

COMBUSTION, FUELS & EMISSIONS CYCLE INNOVATIONS

HEAT TRANSFER: CONJUGATE HEAT

TRANSFER

Atomization and Combustion of

Liquid Fuels

Combustion Dynamics: Instability Analysis II CSP Low Emission Cycles

Numerical Internal Cooling: Ribs, Pin Fins, and

Pedestals - I

Tutorial Session • Room 401 WB-3-7

Paper Session • Room E6 • WB-4-20

Paper Session • Room 317A • WB-6-3 Paper Session • Room 301 • WB-11-2

Session Chair: Ajay Agrawal, Universi-ty of Alabama

Session Chair: Santosh Hem-chandra, Indian Institute of ScienceSession Co-Chair: Changjin Yoon, GE Global Research Center

Session Chair: Martina Hohloch, German Aerospace Center

Session Organizer: Domenico Borello, Università di Roma SapienzaSession Co-Organizer: Giovanna Bari-gozzi, Universita’ Di Bergamo

10:4

5

T

U

T

O

R

I

A

L

Effect of the Diffuser on the Inlet Acoustic Boundary in Combustion-Acoustic Cou-pled Oscillation GT2016-57046 Xiao Han, Xin Hui, Hao Qin,

Yuzhen Lin, Beihang Universi-ty, Beijing, Beijing, China, Man ZHANG, AVIC Commercial Air-craft Engine CO., LTD, Shang-hai, shanghai, China, Chih Jen Sung, University of Connecticut, Storrs, CT, United States

Investigation of Different Solar Hybrid Gas Turbines and Ex-ploitation of Rejected Sun Power GT2016-57700 Chris Kalathakis, National Technical

University of Athens, Athens, Greece, Nikolaos Aretakis, National Techni-cal University of Athens, Attiki, Greece, Ioannis Roumeliotis, Hellenic Naval Academy, Piraeus, 18539, Greece, Alexios Alexiou, Konstantinos Mathioudakis, National Technical University of Athens, Athens, Greece

Gas Turbine Blade Cooling Passage With V and Broken V Shaped Ribs GT2016-56016 Ryoichi Amano, Univ Of Wisconsin-Mil-

waukee, Glendale, WI, United States, Sour-abh Kumar, Jacobs Technology Inc., Tulla-homa, TN, United States

11:1

5

Numerical Analysis of the Dynamic Flame Response and Thermo-Acoustic Stabili-ty of a Full-Annular Lean Par-tially-Premixed Combustor GT2016-57182 Alessandro Innocenti, Antonio

Andreini, Bruno Facchini, Uni-versity of Florence, Florence, It-aly, Matteo Cerutti, GE Oil&Gas Nuovo Pignone, Firenze, Italy

High Temperature Storage for CSP Hybrid Gas Turbine: Test Rig Dynamic Analysis and Exper-imental Validation GT2016-56202 Stefano Barberis, University of Ge-

noa, Genova, Italy, Alberto Nicola Traverso, University of Genova, Genova, Italy, Alberto Traverso, Univ Of Genova, Genova 16145, Italy, Aristide Massardo, Univ Of Genoa, Genova, Italy

Numerical Investigation on Flow and Heat Transfer in Matrix Cooling Channels for Turbine Blades GT2016-56279 Yigang Luan, Shi Bu, Haiou Sun, Tao Sun,

Harbin Engineering University, Harbin, China

11:4

5

CFD Analysis of a SGT-800 Burner in a Combustion Rig GT2016-57423 Abdallah Abou-Taouk, Chalm-

ers University of Technology, Gothenburg, Sweden, Daniel Lörstad, Siemens Industrial Tur-bomachinery, Finspong, Sweden, Niklas Andersson, Lars-Erik Eriksson, Chalmers University of Technology, Gothenburg, Swe-den

Assessment Of Solar Steam Injec-tion In Gas Turbines GT2016-57272 Chris Kalathakis, National Tech-

nical University of Athens, Athens, Greece, Nikolaos Aretakis, National Technical University of Athens, Atti-ki, Greece, Ioannis Roumeliotis, Hel-lenic Naval Academy, Piraeus, 18539, Greece, Alexios Alexiou, Konstanti-nos Mathioudakis, National Tech-nical University of Athens, Athens, Greece

Effect of Rib Density on Flow and Heat Transfer in an Internal Cooling Passage GT2016-57395 Tomoko Hagari, Kawasaki Heavy In-

dustries, Ltd., Akashi, Japan, Katsuhiko Ishida, Kawasaki Heavy Industries Ltd., Akashi, Hyogo, Japan, Kenichiro Takei-shi, Tokushima Bunri University, Sanuki City, Kagawa, Japan, Masaharu Komiya-ma, Gifu Univ, Gifu, Gifu, Japan, Yutaka Oda, Kansai University, Osaka, Japan

12:1

5

Analysis of Time-Signal of an Industrial Gas Turbine Com-bustor Under an Unstable Condition GT2016-57545 Davide Lengani, Università de-

gli Studi di Genova, Genoa, Ita-ly, Pietro Zunino, Università di Genova, Genova, Italy, Frances-co Romoli, Edoardo Bertolotto, Sergio Rizzo, Ansaldo Sviluppo ENergia, Genoa, Italy

Computational Study of the Effect of Inlet Velocity Profile and Rib Orien-tation on Heat Transfer in Rotating Ribbed Radial Turbine Cooling Pas-sages GT2016-57832 Robert Pearce, University of Oxford,

Oxford, United Kingdom, Peter Ireland, Oxford University, Oxford, United King-dom, Matthew McGilvray, University of Oxford, Oxford, Oxfordshire, United King-dom, Ed Romero, Rolls Royce plc, Bristol, United Kingdom

FINAL PROGRAM | 93

WEDNESDAY, JUNE 15 10:45AM - 12:45 PM

HEAT TRANSFER: NUMERICAL FILM COOLING

HEAT TRANSFER: INTERNAL AIR SYSTEMS & SEALS (WITH

TURBOMACHINERY)INDUSTRIAL & COGENERATION

Numerical Film Cooling III Hot Gas Ingestion and Rim Seals I Selected Topics

Paper Session • Room 307A • WB-12-3 Paper Session • Room 307B • WB-15-1 Paper Session • Room 318A • WB-20-5

Session Chair: Malak Malak, Honeywell InternationalSession Co-Chair: John Clark, Wright Patterson Air Force Base (AFRL), WPAFB

Session Organizer: Carl Sangan, University of BathSession Co-Chair: Jens Fridh, KTH - Royal Institute of Technology

Session Chair: Melissa Poerner, Southwest Re-search InstituteSession Co-Chair: Andrea De Pascale, DIN - University Of BolognaShane Coogan, Southwest Research Insti-tute

10:4

5

Improving Film Cooling Performance by Saw-Tooth Slot GT2016-56104 Guangchao Li, Zhuang Wu, Shenyang Aero-

space University, Shenyang, China, Wei Zhang, Northwestern Polytechnical Universi-ty, Xian, China, Yukai Chen, Shenyang Aero-space University, Shenyang, China, Cunliang Liu, Northwestern Polytechnical University, Xi’An, China

Unsteady Flow Phenomena in Turbine Rim Seals GT2016-56110 Paul Beard, Southwell Building,, Oxford, United

Kingdom, John Chew, University of Surrey, Sur-rey, United Kingdom, Feng Gao, University of Sur-rey, Guildford, United Kingdom, Kamaljit Chana, University of Oxford, Oxford, OTHER, United Kingdom

Energy Analysis of Recuperated Gas Tur-bine Cycles With Mist Blade Cooling GT2016-56060 Fifi Elwekeel, Helwan University,Faculty of in-

dustrial Education, cairo, Egypt, Antar Abdala, Helwan University, Faculty of Engineering, cairo, Egypt, Qun Zheng, Harbin Engineering Universi-ty, Harbin/Heilongjiang, China

11:1

5

Automated Design Space Exploration of Advanced-Shaped Film Cooling Holes Using the SHERPA Algorithm GT2016-56194 Karsten Kusterer, B&B-AGEMA, Aachen, Ger-

many, Jens Dickhoff, B&B-AGEMA GmbH, Aachen, Germany, Noel Campana, Aachen University of Applied Sciences, Aachen, Germany, Takao Sugimoto, B&B-AGEMA, Aachen, Germany, Ryozo Tanaka, Masahide Kazari, Kawasaki Heavy Industries, LTD., Akashi, Japan, Dieter Bohn, RWTH Aachen University, Aachen, Germany

Experiments on Front- and Aft- Disk Cavity Ingestion in a Subscale 1.5-Stage Axial Tur-bine GT2016-56214 Jagdish Harihara Balasubramanian, Mukilan

Michael, Ramendra P Roy, Arizona State Univer-sity, Tempe, AZ, United States, Yong Kim, Hee-Koo Moon, Solar Turbines Inc, San Diego, CA, United States

Formation Process of Water Film and Per-formance Effect on Compressor Stage GT2016-56569 Xiaojiang Tian, China Gas Turbine Establish-

ment, Chengdu, China, Hai Zhang, Harbin Engi-neering University, Harbin, China, Xiaojun Pan, China Academy of Aerospace Aerodynamics, Bei-jing, China, Jie Zhou, China Gas Turbine Estab-lishment, Chengdu, China, Qun Zheng, Harbin Engineering University, Harbin/Heilongjiang, China

11:4

5

Film Cooling Performance Improvement with Optimized Hole arrangements on Pressure Side Surface of Nozzle Guide Vane - Part I: Optimization & Numerical Investigation GT2016-57975 Sanga Lee, Seoul National University, Seoul,

Korea (Republic), Dong-Ho Rhee, Korea Aero-space Research Institute, Daejeon, Korea (Re-public), Kwanjung Yee, Seoul National Uni-versity, Seoul, Korea (Republic), Bongjun Cha, Korea Aerospace Research Institute, Daejeon, Korea (Republic)

Comparison of Single and Double Lip Rim Seal Geometry GT2016-56317 Svilen Savov, University of Cambridge, Cam-

bridge, United Kingdom, Nicholas Atkins, Cam-bridge University, Cambridge, United Kingdom, Sumiu Uchida, Mitsubishi Heavy Industries, Na-gasaki, Japan

Reduction of Turbine Blade Unsteady Forces by Shape Modification of Vanes for Industrial Gas Turbines GT2016-56727 Xiying Niu, Lin Wang, Dongming Li, Qiuli Du,

Harbin Marine Boiler and Turbine Research In-stitute, Harbin/Heilongjiang, China

12:15

Film Cooling Performance Improvement With Optimized Hole Arrangements on Pressure Side Surface of Nozzle Guide Vane - Part II: Experimental Validation GT2016-57978 Dong-Ho Rhee, Young Seok Kang, Korea Aero-

space Research Institute, Daejeon, Korea (Re-public), Jeong-Seek Kang, Turbomachinery Laboratory, University of Notre Dame, Notre Dame, IN, United States, Sanga Lee, Kwan-jung Yee, Seoul National University, Seoul, Ko-rea (Republic), Bongjun Cha, Korea Aerospace Research Institute, Daejeon, Korea (Republic)

Hot Gas Ingress Estimation Methods Val-idation in GT Stator-Rotor Cavities by Means of Extensive Field Measurements GT2016-56973 Alessio D’Alessandro, Ansaldo Sviluppo Energia,

Genova, GE, Italy, Francesco Bavassano, Ansaldo Sviluppo Energia, Genoa, Italy, Michela Marré Brunenghi, Stefano Patrone, Marco Pirotta, An-saldo Sviluppo Energia, Genova, Italy, Benedetto Santolini, Ansaldo Energia, Genova, Italy, Mar-co Mantero, Ansaldo Sviluppo Energia, Genova, Genova, Italy

Optimized NOX Control by Injection of Fine Water Spray Into Compressor Dis-charge GT2016-56703 Steve Ingistov, TESORO/WCC, Carson, CA, Unit-

ed States, Sasa Savic, SS&A, Wettingen, Switzer-land

94 | ASME 2016 TURBO EXPO

WEDNESDAY, JUNE 15 10:45AM - 12:45 PM

MICROTURBINES, TURBOCHARGERS & SMALL

TURBOMACHINESOIL & GAS APPLICATIONS STEAM TURBINES

Turbines: Performance and Novel Concepts Gas Turbine Fouling and Erosion HP/IP Turbines Aerodynamics &

Aeromechanical

Paper Session • Room 308C • WB-23-1 Paper Session • Room 402 • WB-24-4 Paper Session • Room E2 • WB-26-1

Session Chair: Fabrizio Reale, Istituto Motori, CNRSession Co-Chair: Grant Musgrove, Southwest Research Institute

Session Chair: Michele Pinelli, University of FerraraSession Co-Chair: Tim Allison, Southwest Research Institute

Session Chair: Said Havakechian, GE Power (Switzerland)Session Co-Chair: Damian Vogt, University of Stuttgart

10:4

5

Micro-Turbojet to Turbofan Conver-sion via Continuously Variable Trans-mission: Thermodynamic Performance Study GT2016-56274 Kobi Kadosh, Technion - IIT, Haifa, Israel, Beni

Cukurel, Technion - Israel Institute of Tech-nology, Technion City - Haifa, Israel

Experimental Evaluation of Compressor Blade Fouling GT2016-56027 Rainer Kurz, Solar Turbines Incorporated, San

Diego, CA, United States, Grant Musgrove, Klaus Brun, Southwest Research Institute, San Antonio, TX, United States

Profile Loss Prediction for High Pressure Steam Turbines GT2016-56114 Junhong Cheon, Doosan Skoda Power, Plzen,

Czech Republic, Petr Milcak, Ales Pacak, Doosan Skoda Power, Pilsen, Czech Republic, Chungrog Kang, Doosan Heavy Industries and Construc-tion Co., Changwon, Korea (Republic), Miroslav Stastny, University of West Bohemia, Pilsen, Czech Republic

11:1

5

IMPACT OF SKIN FRICTION, TIP CLEARANCE AND TRAILING EDGE LOSSES ON SMALL SCALE CRYOGENIC AXIAL TURBINE PERFORMANCE GT2016-57843 KHALIL KHALIL, University of Birmingham,

,BIRMINGHAM, West Midlands, United King-dom, Saad Mahmoud, Raya AL-Dadah, Ayad Al Jubori, Kiyarash Rahbar, University of Birmingham, Birmingham, West Midlands, United Kingdom

Estimation of the Particle Deposition on a Subsonic Axial Compressor Blade GT2016-57340 Alessio Suman, Università di Ferrara, Ferrara,

Italy, Mirko Morini, University of Parma, Parma, Italy, Rainer Kurz, Solar Turbines Incorporated, San Diego, CA, United States, Nicola Aldi, Univer-sity of Ferrara, Ferrara, Italy, Klaus Brun, South-west Research Institute, San Antonio, TX, United States, Michele Pinelli, Pier Ruggero Spina, Uni-versity of Ferrara, Ferrara, Italy

Numerical and Experimental Investiga-tion of Axial Gap Variation in High Pres-sure Steam Turbine Stages GT2016-56547 Juri Bellucci, University of Florence, Firenze,

Italy, Filippo Rubechini, University of Florence, Florence, Italy, Andrea Arnone, University Of Florence, Florence, 50139, Italy, Lorenzo Arcange-li, GE Oil & Gas, Florence, Italy, Nicola Maceli, GE Oil&Gas, Firenze, Italy, Berardo Paradiso, Giaco-mo Gatti, Politecnico di Milano, Milano, Italy

11:4

5

Influence of Disc Spacing Distance on the Aerodynamic Performance and Flow Field of Tesla Turbines GT2016-57971 Wenjiao Qi, Xi’an Jiaotong University, Xi’an,

Shaanxi, China, Qinghua DENG, Institute of Turbomachinery, Xi’an Jiaotong University, Xi’an, Shaanxi Province, China, Zhenping Feng, Xi’an Jiaotong University, Shaanxi, Shaanxi, China, Qi YUAN, Institute of Tur-bomachinery, Xi’an Jiaotong University, Xi’an, Shaanxi, China

An Innovative Method for the Evaluation of Particle Deposition Accounting for the Rotor/Stator Interaction GT2016-57803 Nicola Aldi, University of Ferrara, Ferrara, Italy,

Mirko Morini, University of Parma, Parma, Italy, Michele Pinelli, Pier Ruggero Spina, University of Ferrara, Ferrara, Italy, Alessio Suman, Università di Ferrara, Ferrara, Italy

An Experimental Study of the Aerodynam-ic Forcing Function in a 1.5 Steam Turbine Stage GT2016-56939 Giacomo Gatti, Paolo Gaetani, Berardo Para-

diso, Politecnico di Milano, Milano, Italy, Juri Bellucci, University of Florence, Department of Industrial Engineering, Florence, Italy, Lorenzo Arcangeli, GE Oil & Gas, Florence, Italy, Nicola Maceli, GE Oil&Gas, Firenze, Italy, Vincenzo Dos-sena, Politecnico Di Milano, Milano, Italy

12:15

Design and Testing Process for a 7kW Radial Inflow Refrigerant Turbine at the University of Queensland GT2016-58111 Hugh Russell, University of Queensland,

Brisbane, Queensland, Australia, Andrew Rowlands, The University of Queensland, Brisbane, Australia, Carlos André De Miran-da Ventura, University of Cambridge, Depart-ment of Engineering - Whittle Laboratory, Cambridge, United Kingdom, Ingo Jahn, The University of Queensland, QLD, Queensland, Australia

“Modelling of Particle Transport, Erosion and Deposition in Power Plant Gas Paths” GT2016-57984 Alessandro Corsini, Sapienza University of Rome,

Roma, Italy, Domenico Borello, Università di Roma Sapienza, Rome, Italy, Franco Rispoli, Sa-pienza University of Rome, Rome, Italy, Giovanni Delibra, ‘Sapienza’ University of Rome, Rome, It-aly, Lucio Cardillo, Sapienza University of Rome, Rome, Italy, A. Salvagni, Sapienza Università di roma, Rome, Roma, Italy, Paolo Venturini, Dipar-timento di Meccanica e Aeronautica, ‘Sapienza, Roma, Italy, Anthony G. Sheard, AGS Consulting, LLC, Atlanta, GA, United States

Numerical Aerodynamic Damping Eval-uation of High-Pressure Steam Turbine Blades for Aeromechanical Characteriza-tion GT2016-56378 LORENZO PERUZZI, Università degli studi di

Firenze, Florence, Italy, Juri Bellucci, Univer-sity of Florence, Firenze, Italy, Lorenzo Pinelli, University of Florence, Florence, Italy, Andrea Arnone, University Of Florence, Florence, 50139, Italy, Lorenzo Arcangeli, GE Oil & Gas, Florence, Italy, Lorenzo Cosi, Nuovo Pignone (ge Oil & Gas), Florence, Italy, Marco Mazzucco, GE Oil & Gas, Florence, Italy

FINAL PROGRAM | 95

WEDNESDAY, JUNE 15 10:45AM - 12:45 PM

STRUCTURES & DYNAMICS: FATIGUE, FRACTURE & LIFE

PREDICTION

STRUCTURES & DYNAMICS: ROTORDYNAMICS

STRUCTURES & DYNAMICS: STRUCTURAL MECHANICS,

VIBRATION & DAMPING

Creep and Creep-Fatigue Model Development Bearings -Tilting Pad Bearings Frictional Joints

Paper Session • Room 300 • WB-28-3 Paper Session • Room 307C • WB-31-3 Paper Session • Room 308A • WB-32-6

Session Chair: Jonathan Douglas, Fraz-er-Nash Consultancy Ltd.Session Co-Chair: Dipankar Dua, Siemens Energy Inc., Scott Keller, Power System Manufacturing

Session Chair: Ilmar Ferreira Santos, Tech-nical University of DenmarkSession Co-Chair: Keun Ryu, Hanyang Uni-versity, Ansan

Session Chair: Dr. Andreas Hartung, MTU Aero Engines AGSession Co-Chair: Christoph Schwing-shackl, Imperial College

10:4

5

An Isothermal Model for Creep Rupture Prediction of Gas Turbine Airfoils With Thickness Effect GT2016-56072 Mamballykalathil Menon, Peter T. Kantzos,

Daniel J. Greving, Honeywell International, Phoenix, AZ, United States

EXPERIMENTALLY DETERMINE THE IM-PACT OF JACKING-OIL POCKETS ON THE ROTORDYNAMIC CHARACTERISTICS OF A FOUR-PAD, LBP, TILTING-PAD JOUR-NAL BEARINGTechnical Presentation Only. GT2016-56352 Matthew Kluitenberg, Decagon Devices, Pullman,

WA, United States, Dara Childs, Texas A & M Univ, College Station, TX, United States

Investigation of Damping Potential of Strip Damper on a Real Turbine Blade GT2016-57230 Mohammad Afzal, Royal Institute of Technolo-

gy, Stockholm, Sweden, Vsevolod Kharyton, Sie-mens Industrial Turbomachinary AB, Finspong, Sweden, I. Lopez Arteaga, Leif Kari, Royal Insti-tute of Technology, Stockholm, Sweden

11:1

5

Comparative Analysis of Stress Relax-ation and Creep in a Single-Crystal Su-peralloy GT2016-56541 Daniel Leidermark, Linköping Universi-

ty, Linkoping, Sweden, Johan Moverare, Linköping University, Linköping, Sweden

Development of an Active Control System for Rotating Machinery by Means of Tilting Pad Journal Bearings GT2016-56632 Steven Chatterton, Politecnico di Milano - Dept.

Mech. Engineering, Milan, Italy, Filippo Cangioli, Politecnico di Milano, Milan, Italy, Paolo Pennac-chi, Politechnico di Milano, Milan, Italy, Andrea Vania, Politecnico di Milano, Milan, Italy, Phuoc Vinh Dang, Politecnico Di Milano - Dept. Mechan-ical, Milan, OO, Italy

Pre Optimization of Asymmetrical Under-platform Dampers GT2016-57359 Chiara Gastaldi, POLITECNICO DI TORINO - DI-

MEAS, TORINO, Italy, Muzio Gola, Politecnico di Torino, Torino, Italy

11:4

5

Creep/Fatigue Tests on Full Scale Hol-low Turbine Blades Considering Tem-perature Gradient GT2016-56807 Cao Chen, Xiaojun Yan, Beihang University,

Beijing, China

Behavior of TiltingPad - Journal Bearings With Large Machining Error on Pads GT2016-56674 Steven Chatterton, Politecnico di Milano - Dept.

Mech. Engineering, Milan, Italy, Phuoc Vinh Dang, Politecnico Di Milano - Dept. Mechanical, Milan, OO, Italy, Paolo Pennacchi, Politechnico di Milano, Milan, Italy, Andrea Vania, Filippo Cang-ioli, Politecnico di Milano, Milan, Italy

Reduced Order Modeling of Bladed Disks With Friction Ring Dampers GT2016-57831 Seunghun Baek, Bogdan Epureanu, University of

Michigan, Ann Arbor, MI, United States

12:15

“Creep-Fatigue Life Assessment Strat-egy for Gas Turbine Blades and Vanes: Safe Life Procedure Development, As-sessment and Experimental Validation” GT2016-58039 Erica Vacchieri, Ansaldo Sviluppo Energia

s.p.a., Genoa, Italy, Stuart Holdsworth, EMPA: Materials Science & Technology, Duebendorf, Switzerland, Eleonora Poggio, Ansaldo Svi-luppo Energia s.p.a., Genoa, Italy, Paolo Vil-lari, Ansaldo Sviluppo Energia, Genova, Italy, Alessio Costa, Ansalo Energia, Genoa, Italy

Development and Validation of an Efficient TEHD Model of Tilting Pad Journal Bear-ings GT2016-57401 Enrico Meli, Roberto Conti, Amedeo Frilli, Dan-

iele Nocciolini, Simone Panconi, Luca Pugi, An-drea Rindi, Stefano Rossin,

Increased Load Carrying Capacity of Large Tilting-Pad Journal Bearings by Injection of Cold Oil GT2016-57475 Nico Buchhorn, Sebastian Kukla, Beate Bender,

Modeling Microslip in Flange Joints and Its Effects on the Dynamics of Multi-Stage Bladed Disk Assemblies GT2016-57998 Christian M. Firrone, Giuseppe Battiato, Po-

litecnico di Torino, Torino, Italy, Bogdan Epurea-nu, University of Michigan, Ann Arbor, MI, Unit-ed States

96 | ASME 2016 TURBO EXPO

WEDNESDAY, JUNE 15 10:45AM - 12:45 PM

SUPERCRITICAL CO2 POWER CYCLES

TURBOMACHINERY: AXIAL FLOW FAN & COMPRESSOR

AERODYNAMICS

TURBOMACHINERY: AXIAL FLOW TURBINE

AERODYNAMICS

sCO2 Systems and Component Testing Transonic Rotors Low pressure turbine

aerodynamics I

Paper Session • Room 317B • WB-36-1 Paper Session • Room 318C • WB-37-7 Paper Session • Room 327 • WB-38-6

Session Chair: Eric Clementoni, Bechtel Marine Propulsion CorporationSession Co-Chair: Darryn Fleming, Sandia National Labs

Session Chair: Volker Gümmer, Rolls-Royce Deutschland Ltd. & Co. KGSession Co-Chair: Heinz-Peter Schiffer, Technische Universität Darmstadt

Session Chair: Yavuz Guendogdu, MTUSession Co-Chair: Akif Mumcu, Leibniz Uni-versität Hannover

10:4

5

Evaluation of Recent Data From the San-dia National Laboratories Closed Bray-ton Cycle Testing GT2016-57620 Jim Pasch, Sandia National Lab, Albuquerque,

NM, United States, Matt Carlson, Gary Ro-chau, Darryn Fleming, Sandia National Labs, Albuquerque, NM, United States

Numerical Investigation of Entropy Gen-eration Distributions in a Transonic Com-pressor GT2016-56519 Xi Nan, Institute of Engineering Thermophysics,,

Beijing, China, Le Liu, Institute of Engineering Thermophysics, Beijing, China, Ning Ma, Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing, Beijing, China, Qian Lu, Feng Lin, Institute of Engineering Thermophysics, Bei-jing, China

Analysis of a LPT Rotor Blade for a Geared Engine: Part II Characterization of the Time-Varying Flow Field in a Single Stage Research Turbine GT2016-57725 Francesca Satta, Daniele Infantino, Daniele Si-

moni, University of Genova, Genova, Italy, Mari-na Ubaldi, Pietro Zunino, Università di Genova, Genova, Italy, Francesco Bertini, GE AvioAero, Rivalta di Torino, Italy

11:1

5

Steady-State Power Operation of a Su-percritical Carbon Dioxide Brayton Cy-cle with Thermal-Hydraulic Control GT2016-56038 Eric Clementoni, Timothy Cox, Martha King,

Bechtel Marine Propulsion Corporation, West Mifflin, PA, United States

Vorticity Dynamics Based Flow Diagnosis for a 1.5-Stage High Pressure Compressor With an Optimized Transonic Rotor GT2016-56682 Huanlong Chen, Harbin Institute of Technolo-

gy, Harbin, Heilongjiang, China, Mark Turner, Kiran Siddappaji, Syed Moez Hussain Mahmood, University of Cincinnati, Cincinnati, OH, United States

Analysis of a LPT Rotor Blade for a Geared Engine: Part I Aero-Mechanical Design and Validation GT2016-57746 Matteo Giovannini, Filippo Rubechini, Universi-

ty of Florence, Florence, Italy, Michele Marconci-ni, University of Florence, Firenze, Italy, Andrea Arnone, University Of Florence, Florence, 50139, Italy, Francesco Bertini, GE AvioAero, Rivalta di Torino, Italy

11:4

5

Development of the Supercritical Car-bon Dioxide Power Cycle Experimental Loop in KIER GT2016-57460 Junhyun Cho, Hyungki Shin, Ho-Sang Ra,

Gilbong Lee, Chulwoo Roh, Beomjoon Lee, Young-Jin Baik, Korea Institute of Energy Re-search, Daejeon, Korea (Republic)

Aerodynamic Design of a Highly Loaded Axial Flow Fan Rotor Using a Novel One-Di-mensional Design Method With Its Numer-ical Simulation GT2016-57333 Ali Shahsavari, isfahan university of technology,

Isfahan, Isfahan, Iran, Mahdi Nili-Ahamadabadi, Isfahan University of Technology, Esfahan, Iran

The Effect of Fsti to the Combined Sepa-ration Control Strategy of Surface Rough-ness With Upstream Wakes GT2016-58163 Sun Shuang, Civil Aviation University of China,

Tianjin, China, Lei Zhijun, Lu Xin'gen, Zhang Yanfeng, Zhu Junqiang, Institute of Engineering Thermophyiscs, Chinese Academy of Sciences, Beijing, China

12:15

Effect of Gaseous Admixtures on Cycles With Supercritical Carbon Dioxide GT2016-57644 Ladislav Vesely, Vaclav Dostal, Jan Ste-

panek, Czech Technical University In Prague, Prague, Prague, Czech Republic

Optimizing Surge Margin and Efficiency of a Transonic Compressor GT2016-57896 Georgios Goinis, Eberhard Nicke, DLR, Cologne,

Germany

Parasitic Loss due to Leading Edge In-strumentation on a Low Pressure Turbine Blade GT2016-57367 Henry Ng, The University of Cambridge, Cam-

bridge, United Kingdom, John D. Coull, Univer-sity of Cambridge, Cambridge, Cambs., United Kingdom

FINAL PROGRAM | 97

WEDNESDAY, JUNE 15 10:45AM - 12:45 PM

TURBOMACHINERY: DESIGN METHODS & CFD MODELING

FOR TURBOMACHINERY

TURBOMACHINERY: RADIAL TURBOMACHINERY

AERODYNAMICS

TURBOMACHINERY: UNSTEADY FLOWS IN TURBOMACHINERY

Radial Turbomachinery Design Radial Compressors - Performance Optimization (I)

Unsteady Flows in Compressors II

Paper Session • Room E1 • WB-39-5 Paper Session • Room E4 • WB-42-3 Paper Session • Room 403 • WB-44-5

Session Chair: Sami Girgis, Pratt & Whit-neySession Co-Chair: Jaeho Choi, Hanwha Techwin Co., Ltd. Ali Mahallati, Concepts NREC

Session Chair: Hamid Hazby, PCA Engineers Ltd., LincolnSession Co-Chair: Liping Xu, University of Cambridge

Session Chair: Henry Knobbe-Eschen, An-ecomSession Co-Chair: Dale Vanzante, NASA Glenn Research Center

10:4

5

Numerical Analysis of the Influences of Balance Hole Diameter on the Flow Characteristics of the Back Chamber of Centrifugal Pump GT2016-56372 Wei Dong, WuLi Chu, Xiangjun Li, Northwest-

ern Polytechnical University, Xi’an, SHAANXI, China, Yanhui Wu, Northwestern Polytechni-cal University, Xian, China

Experimental and Numerical Verification of an Optimization of a Fast Rotating High Performance Radial Compressor Impeller GT2016-56546 Martin Elfert, German Aerospace Center, 51147

Cologne, Germany, Anton Weber, German Aero-space Center (DLR), Cologne, Germany, David Wittrock, Andreas Peters, DLR, German Aero-space Center, Cologne, Germany, Christian Voss, Deutsches Zentrum für Luft- und Raumfahrt e.V. (DLR), Köln, Germany, Eberhard Nicke, DLR, Co-logne, Germany

Numerical Investigation of Three-Dimen-sional Separation in an Axial Flow Com-pressor: The Influence of Free-Stream Tur-bulence Intensity and Endwall Boundary Layer State GT2016-57241 Ashley Scillitoe, Paul G. Tucker, University of

Cambridge, Cambridge, United Kingdom, Paolo Adami, Rolls-Royce Plc, Derby, United Kingdom

11:1

5

Technique for Adequate CFD-Modeling of the Pump with Hydro-Drive of the Low-Pressure Stage GT2016-57689 Vasilii Zubanov, Leonid Shabliy, Samara

State Aerospace University, Samara, Russia, Alexander Krivcov, SSAU, Samara, Russia, Valery Matveev, Samara State Aerospace University, Samara, Russia

Numerical Investigation of Shock Effects on Performance and Flow Field in a Tran-sonic Centrifugal Impeller GT2016-56488 Huijing Zhao, Zhiheng Wang, Chaoyang Jiang,

Hongshi Yu, Xi’an Jiaotong University, Xi’an, Shaanxi, China, Guang Xi, Xi’an Jiaotong Univer-sity, Xi’an, Shaanxi Province, China

Understanding of Secondary Loss Struc-tures in a Multi-Stage Transonic Compres-sor Using DES GT2016-57218 Donghyun Kim, Changmin Son, Pusan Nation-

al University, Busan, Korea (Republic), Kuisoon Kim, Pusan National Univ, Pusan, Korea (Repub-lic)

11:4

5

Design Method for Globally Curva-ture-Smooth Centrifugal Compressor Blades GT2016-56416 Qingzhen Bi, Shanghai Jiao Tong University,

Shanghai, China, Hua Chen, National Labo-ratory of Turbocharging Technology North China Eng Rsrch Inst, Tianjin, China, Yaoan Lu, Shanghai Jiao Tong University, Shanghai, China, Ding Tong, National Laboratory of Engine Turbocharging Technology, Tianjin, China

Flow Analysis of a High Flowrate Centrif-ugal Compressor Stage and Comparison With Test Rig Data GT2016-56551 Anton Weber, German Aerospace Center (DLR),

Cologne, Germany, Christian Morsbach, Edmund Kuegeler, DLR, German Aerospace Center, Co-logne, Germany, Christoph Rube, RWTH Aachen University, Aachen, Germany, Matthias We-deking, IST TWTH Aachen, Aachen, Germany

Origins and Structure of Rotating Insta-bility: Part 1 Experimental and Numerical Observations in a Subsonic Axial Compres-sor Rotor GT2016-56221 Yanhui Wu, Northwestern Polytechnical Univer-

sity, Xian, China, Zhiyang Chen, Northwestern Polytechnical University, Xi'an, China, Guang-yao An, Northwestern Polytechnical Universi-ty, Xian, Shanxi, China, Jun Liu, Guowei Yang, Northwestern Polytechnical University, Xi’an, Shanxi, China

12:15

THE OPTIMIZATION OF A CENTRIFUGAL IMPELLER BASED ON A NEW MUTI-OBJEC-TIVE EVOLUTIONARY STRATEGY GT2016-56592 Xiaojian LI, Yijia ZHAO, Zhengxian LIU, Hua

CHEN,

Quasi-3D Inverse Design of a Vaned 90-Degree Bent Diffuser for the Exit of a Centrifugal Compressor Impeller GT2016-57881 Mohammad Shumal, Mahdi Nili-Ahamad-

abadi, Ebrahim Shirani,

Reynolds Correction in Centrifugal Com-pressors: Theory and Experimental Valida-tion of a Revised Correlation GT2016-56396 Luca Scarbolo, Elisabetta Belardini, Ernani Ful-

vio Bellobuono, Dante Tommaso Rubino, GE Oil & Gas, Firenze, Italy, Libero Tapinassi, GE Oil & Gas, Florence, FI, Italy

Origins and Structure of Rotating Insta-bility: Part 2 Numerical Observations in a Transonic Axial Compressor Rotor GT2016-56223 Yanhui Wu, Guangyao An, Northwestern Poly-

technical University, Xian, China, Zhiyang Chen, Northwestern Polytechnical University, Xi'an, China, Jun Liu, Guowei Yang, Northwestern Polytechnical University, Xi’an, Shanxi, China

98 | ASME 2016 TURBO EXPO

WEDNESDAY, JUNE 15 2:30 - 5:30 PM

AIRCRAFT ENGINE COMBUSTION, FUELS & EMISSIONS

COMBUSTION, FUELS & EMISSIONS

Propellers and Open Rotors Pollutant Emissions: Soot and Particulates

Combustion Dynamics: Instability Analysis I

Paper Session • Room 327 • WC-1-8 Paper Session • Room E3 • WC-4-16 Paper Session • Room 317C • WC-4-19

Session Chair: Rainer Schnell, German Aerospace Center (DLR)Session Co-Chair: Victor Mileshin, Cen-tral Institute of Aviation Motors

Session Chair: Federico Bonzani, Ansaldo Sviluppo EnergiaSession Co-Chair: Fulvio Magni, GE Power

Session Chair: Fabrice Giuliani, Combus-tion Bay One e.U., GrazSession Co-Chair: Hans Reiss, Meggitt Sens-ing Systems

2:30

Wake and Loss Analysis for a Double Bladed Swept Propeller GT2016-56540 Alexandre Capitao Patrao, Chalmers Univer-

sity of Technology, Göteborg, Västra Götaland, Sweden, Richard Avellán, GKN Aerospace Swe-den, Trollhattan Vastra Gotaland, Sweden, An-ders Lundbladh, GKN Aerospace, Trollhättan, Sweden, Tomas Grönstedt, Chalmers Universi-ty, Gothenburg, Sweden

patio-Temporal Distribution of Soot Tem-perature for Flames Using Optical Pyrom-etry Under Unsteady Inlet Airflow Condi-tions GT2016-56676 Arda Cakmakci, Michael Knadler, Jong Guen

Lee, University of Cincinnati, Cincinnati, OH, United States

Impact of Heat Release Distribution on the Spinning Modes of an Annular Combustor With Multiple Matrix Burners GT2016-56309 Davide Laera, Kevin Prieur, Daniel Durox, Thi-

erry Schuller, Sergio Mario Camporeale, Sébas-tien Candel

3:00

Effect of Aft Rotor on the Inter-Rotor Flow of an Open Rotor Propulsion Sys-tem GT2016-56392 Paul E. Slaboch, Saint Martin's University,

Lacey, WA, United States, David B. Stephens, Dale Vanzante, NASA Glenn Research Center, Cleveland, OH, United States

Evaluating Effects of Fuel Properties on Smoke Emissions GT2016-56791 Meor Ruslan, Ihab Ahmed, Bhupendra Khandel-

wal, The University of Sheffield, Sheffield, South Yorkshire, United Kingdom

Reacting Pressurized Spray Combustor Dynamics: Part 2 High Speed PlanarMea-surements GT2016-56345 Ianko Chterev, Nicholas Rock, Hanna Ek, Benja-

min Emerson, David Noble, Eric Mayhew, Ton-ghun Lee, Naibo Jiang, Sukesh Roy, Jerry Seitz-man, Tim Lieuwen

3:30

Contra Rotating Propeller Modelling for Open Rotor Engine Performance Simula-tions GT2016-56645 Alexios Alexiou, Charalambos Frantzis, Ni-

kolaos Aretakis, Vassilios Riziotis, Ioannis Roumeliotis, Konstantinos Mathioudakis,

Large Eddy Simulation of Soot Formation in a Model Gas Turbine Combustor GT2016-57952 Heeseok Koo, Malik Hassanaly, Venkat Raman,

The University of Michigan, Ann Arbor, MI, Unit-ed States, Michael Mueller, Princeton University, Princeton, NJ, United States, Klaus Peter Geigle, Institute of Combustion Technology, Stuttgart, Germany

Reacting Pressurized Spray Combustor Dynamics: Part 1 Fuel Sensitivitiesand Blowoff Characterization GT2016-56346 Nicholas Rock, Ianko Chterev, Travis Smith,

Hanna Ek, Benjamin Emerson, David Noble, Jer-ry Seitzman, Tim Lieuwen

4:00

An Optimization of Swirl Recovery Vane for Fokker 29 Propeller Using Design of Experiment Method GT2016-57691 Wang Yangang, Chen Nanshu, Northwestern

Polytechnical University, Xi’an, China, Li Qin-gxi, Georg Eitelberg, Delft University of Tech-nology, Delft, Netherlands

Large Eddy Simulation of a Reacting Jet in Cross Flow With NOx Prediction GT2016-56762 Johannes Weinzierl, Technical University Mu-

nich, Garching bei München, Germany, Denise Ahrens, Michael Kolb, Chair of Thermodynamics, TUM, Garching, Germany, Christoph Hirsch, TU München, München, Germany, Thomas Sattel-mayer, Technical Univ Munich, Garching, Ger-many

Influence of Heat Transfer and Material Temperature on Combustion Instabilities in a Swirl Burner GT2016-56368 Christian Kraus, Laurent Selle, Thierry Poinsot,

Christoph M. Arndt, Henning Bockhorn

4:30

Comparative Study of Two and Three Blade Mini Propellers Aerodynamic Performance GT2016-56174 Prathapanayaka rajeevalochanam, Vinod

Kumar Nanjundaiah, Santhosh Kumar Sa-hadevan, Krishnamurthy Settisara Janney, Narendra Sharma, CSIR- National Aerospace Laboratories, Bangalore, Karnataka, India

Online Monitoring of Thermoacoustic Ei-genmodes in Annular Combustion Systems Based on a State Space Model GT2016-56671 Driek Rouwenhorst, Jakob Hermann, IfTA Inge-

nieurbuero fuer Thermoakustik GmbH, Groeben-zell, Bavaria, Germany, Wolfgang Polifke, Tech-nische Universität München, Garching, Germany

5:00

Integrated Simulation Model of Rotor/Propeller Powered Aerobot in Steady Flight GT2016-56923 Wei Zhao, Zhenguo Wang, National Universi-

ty of Defense Technology, Changsha, Hunan, China

Modelling of Gas turbine NOx emissions based on long-term operation data GT2016-57252 Christian Rudolf, RWTH Aachen University,

Aachen, Germany, Manfred Wirsum, Rwth-Aachen University, Aachen, Germany, Stefano Bernero, Martin Gassner, Benjamin Timo Zoller, GE Power, Baden, Switzerland

Experimental Study on Instability Characteris-tics of Low-Swirl Flames in a Multi-Nozzle Com-bustor With Different Swirling Arrays GT2016-56714 Weijie Liu, Bing Ge, Yinshen Tian, Shusheng

Zang, Shilie Weng, Mingjia Li, Wenyan Xu

FINAL PROGRAM | 99

WEDNESDAY, JUNE 15 2:30 - 5:30 PM

CONTROLS, DIAGNOSTICS & INSTRUMENTATION ELECTRIC POWER FANS & BLOWERS

Topics in InstrumentationThe Pathway Forward: Future Gas Turbine Products & Technologies -

OEM Perspective

Numerical methods and Studies - I

Paper Session • Room 308B • WC-5-7 Panel Session • Room 401 • WC-8-1 Paper Session • Room 308C • WC-9-3

Session Organizer: Peter Loftus, Rolls-royce Plc, Derby Session Co-Organizer: Mehmet Mersinligil, Session Co-Chair: Vivek Badami,

Session Chair: Richard Dennis, US Dept Of Energy

Session Chair: Chunill Hah, NASA/GlennSession Co-Chair: Zhipping Wang, Morrison

2:30

Flow Field Characterization at the Out-let of a Lean Burn Single Sector Combus-tor by Laser-Optical Methods GT2016-56365 Michael M. Schroll, Ulrich Doll, Guido Stock-

hausen, Christian Willert, Ulrich Dr. Meier, Christoph Hassa, Imon Bagchi

P

A

N

E

L

Modelling of Axial Fan and Anti-Stall Ring on a Virtual Test Rig for Air Performance Evaluation GT2016-56862 Giovanni Delibra, Tommaso Bonanni, Alessan-

dro Corsini, Anthony G. Sheard, David Volponi

3:00

Temperature Measurements at the Out-let of a Lean Burn Single Sector Combus-tor by Laser-Optical Methods GT2016-56370 Ulrich Doll, Johannes Heinze, Guido Stock-

hausen, Ulrich Dr. Meier, Christoph Hassa, Imon Bagchi

Numerical Simulations of Unsteady Aero-dynamic Effects in the Blade Tip Region of Cooling Fans GT2016-57786 Gi-Don Na, Nils Springer, Michael Mauß, Frank

Kameier

3:30

Design of the Purdue Experimental Tur-bine Aerothermal Laboratory for Optical and Surface Aero-Thermal Measurements GT2016-58101 Guillermo Paniagua, DAVID GONZALEZ

CUADRADO, Jorge Saavedra, Valeria Andre-oli, Dave Lawrence, Terrence Meyer, Scott Meyer

Characterization of Tip Leakage Flow Through the Tip Clearance Gap of an Axial Industrial Fan GT2016-57864 Abdelaziz A. A. Gamil, Joao Teixeira, Hamad M

Alhajeri, Faris Elasha

4:00

The Use of Eddy Current Sensors for the Mea-surement of Rotor Blade Tip Timing: Develop-ment of a New Method Based on Integration GT2016-57368 Kamaljit Chana, University of Oxford, Oxford,

OTHER, United Kingdom, Deepanshu Singh, IIT Delhi, NEW DELHI, India, Vikram Sridhar, Oxford University, Oxford, United Kingdom

Low Survey of a Forward Curved Blades Centrifugal Fan for HVAC Applications GT2016-57820 Lucio Cardillo, Sapienza University of Rome,

Rome, Italy, Giovanni Delibra, ‘Sapienza’ Uni-versity of Rome, Rome, Italy, Alessandro Corsini, Sapienza University of Rome, Roma, Italy, Dario Brivio, Fabio Breviario, Nicotra Gebhardt, Zin-gonia (BG), Italy

4:30

Design Considerations for Tip Clearance Control and Measurement on a Turbine Rainbow Rotor With Multiple Blade Tip Geometries GT2016-56544 Sergio Lavagnoli, Von Karman Inst for Fluid

Dynamics, Rhode Saint Genése, Belgium, Cis De Maesschalck, Von Karman Institute for Fluid Dynamics, Rhode Saint Genese, Belgium, Valeria Andreoli, Purdue University, West La-fayette, IN, United States

Investigation of a Diffuser-Volute Combi-nation With Variable Cross-Sectional Area for Centrifugal Fans GT2016-56299 Tore Fischer, Institute of Turbomachinery and

Fluid Dynamics, Leibniz Universität Hannover, Hannover, Germany, Manuel Rudersdorf, Se-bastian Burgmann, The fuel cell research center ZBT GmbH, Duisburg, Germany, Thorsten kleine Sextro, Institute for Turbomachniery and Flu-id-Dynamics, Hannover, Germany, Joerg Seume, Gottfried Wilhelm Leibniz Universitaet, Han-nover, Germany

5:00

100 | ASME 2016 TURBO EXPO

WEDNESDAY, JUNE 15 2:30 - 5:30 PM

HEAT TRANSFER: GENERAL HEAT TRANSFER

HEAT TRANSFER: INTERNAL AIR SYSTEMS & SEALS (WITH

TURBOMACHINERY)

HEAT TRANSFER: COMBUSTORS (WITH COMBUSTION, FUELS &

EMISSIONS)

Experimental Heat Transfer Methods Pre-Swirl Systems Combustor Liner Cooling -

Experimental and Validation

Session Type • Room 301 • WC-13-3 Session Type • Room 307A • WC-15-3 Session Type • Room 307B • WC-17-1

Session Organizer: Jeffrey Bons, Ohio State Univ.Session Co-Organizer: Pepe Palafox, GE Aviation

Session Organizer: Peter Childs, Imperial College LondonSession Co-Organizer: Riccardo Da Soghe, Ergon Research

Session Chair: Marc Polanka, Air Force Insti-tute of TechnologySession Co-Chair: Rudolph Dudebout, Honey-well Aerospace

2:30

CFD Evaluations of Film Cooling Flow Scaling Between Engine and Experimen-tal Conditions GT2016-56760 James Rutledge, Air Force Institute of Tech-

nology, Wright Patterson AFB, OH, United States, Marc Polanka, Nathan Greiner, Air Force Institute of Technology, WPAFB, OH, United States

Experimental and Numerical Investigation of Low-Pressure Preswirl Stator-Rotor Cooling System GT2016-56483 Barkin Kutlu, university of central florida, OR-

LANDO, FL, United States, Brandon Ealy, Center for Advanced Turbomachinery and Energy Re-search, University of Central Florida, Longwood, FL, United States, Jahed Hossain, Wenping Wang, University of Central Florida, Orlando, FL, United States, Jay Kapat, University of Central Florida (UCF), Orlando, FL, United States, Ching-Pang Lee, Siemens Energy Inc., Orlando, FL, United States, John Marra, Siemens Energy Inc, Orlando, FL, United States, Jae Um, Siemens En-ergy, Winter Garden, FL, United States, Chander Prakash, Siemens AG, Orlando, FL, United States

Experimental and Numerical Investigations of Effusion Cooling for High Pressure Turbine Com-ponents: Part 1 Experimental Study With PSP GT2016-56398 Guanghua Wang, Gustavo Ledezma, GE Global

Research, Niskayuna, NY, United States, James DeLancey, GE Global Research Center, Niskayu-na, NY, United States, Anquan Wang, GE Avia-tion, Cincinnati, OH, United States

3:00

Laboratory Infra-Red Thermal Assess-ment of Laser-Sintered High-Pressure Nozzle Guide Vanes to De-Risk Engine Design Programmes GT2016-57382 Benjamin Kirollos, University of Oxford, Ox-

ford, United Kingdom, Thomas Povey, Univ Of Oxford, Oxford, United Kingdom

Experimental and Numerical Investigation of Effusion Cooling for High Pressure Turbine Com-ponents: Part 2 Numerical Results GT2016-56400 Gustavo Ledezma, Julienne LaChance, GE Glob-

al Research, Niskayuna, NY, United States, An-quan Wang, GE Aviation, Cincinnati, OH, United States, Guanghua Wang, GE Global Research, Ni-skayuna, NY, United States, Gregory Laskowski, GE Aviation, Lynn, MA, United States

3:30

Unsteady Heat Transfer and Pressure Measurements on the Airfoils of a Ro-tating Transonic Turbine With Multiple Cooling Configurations GT2016-57768 Jeremy Nickol, Randall Mathison, Michael

Dunn, Jong-shang Liu, Malak Malak

Design and Numerical Analysis of a New Type of Pre-swirl Nozzle GT2016-56738 Yuxin Liu, Northwestern Polytechnical Univer-

sity, Xi’an, China, Gaowen Liu, Northwestern Ploytechnical University, Xi’an, Shaanxi, China, Xiaozhi Kong, Northwestern Polytechnical Uni-versity, Xi'an, China, Qing Feng, Northwestern Ploytechnical University, Xi’an, Shaanxi, China

Effusion Cooled Combustor Liner Tiles With Modern Cooling Concepts: A Compar-ative Experimental Study GT2016-56598 Thomas Jackowski, Achmed Schulz, Hans-Jorg

Bauer, Miklos Gerendas, Thomas Behrendt

4:00

Uncertainty Quantification of Thermocouple Air Temperature Measurement in Highly Ra-diative Environment: Application to Turbo-fan Engine Compartment GT2016-57938 Yannick Sommerer, Vincent Drouin, AIRBUS,

TOULOUSE, France, Xavier Nicolas, Benoît Trouette, Université Paris-Est, MSME UMR CNRS 8208, Marne-La-Vallée, France

Full Coverage Film Cooling Performance for Combustor Cooling Manufactured Us-ing DMLS GT2016-56504 Kyle Vinton, Sara Nahang-Toudeshki, Lesley

Wright, Baylor University, Waco, TX, United States, Andrew Carter, Stratasys Direct Manu-facturing, Austin, TX, United States

4:30

Water-Mist-Cooled Heat Sink for Au-tonomous Air-Cooling System (AACS) of More Electric Aircraft (MEA) GT2016-56578 Akira Murata, Tokyo University of Agricul-

ture and Technology, Tokyo, Japan, Hiroshi Saito, Tokyo Metropolitan College of Industri-al Technology, Tokyo, Japan, Yoji Okita, IHI Corporation, Kanagawa, Japan

Theoretical and Numerical Analysis on the Temperature Drop and Power Consump-tion of a Pre-Swirl System GT2016-56742 Gaowen Liu, Northwestern Ploytechnical Uni-

versity, Xi’an, Shaanxi, China, Heng Wu, North-western Polytechnical University, Xi'an, Shaanxi, China, Qing Feng, Northwestern Ploytechnical University, Xi’an, Shaanxi, China, Songling Liu, Northwestern Polytechnical University, Xi’an, Shaanxi, China

Effusion Cooling System Optimization for Modern Lean Burn Combustor GT2016-57721 Antonio Andreini, University of Florence, Flor-

ence, Italy, Riccardo Becchi, University of Flor-ence, Firenze, Italy, Bruno Facchini, Alessio Picchi, Lorenzo Mazzei, University of Florence, Florence, Italy, Antonio Peschiulli, GE Avio Srl, Rivalta di Torino, Italy

5:00

An Experimental and Numerical Investiga-tion of the Effect of Combustor-Nozzle Plat-form Misalignment on Endwall Heat Transfer at Transonic High Turbulence Conditions GT2016-57763 Allan Arisi, David E. Mayo, Jr., ZHIGANG LI,

Wing-Fai Ng, Hee-Koo Moon, Luzeng Zhang

Experimental Investigation of Effusion Cooling Performance on the Liner of a Scaled Three Injector Annular Combustor GT2016-57035 Yongbin Ji, Bing Ge, Shusheng Zang, Jiangpeng

Yu, Ji Zhang

FINAL PROGRAM | 101

WEDNESDAY, JUNE 15 2:30 - 5:30 PM

HEAT TRANSFER: EXPERIMENTAL FILM

COOLING

MANUFACTURING MATERIALS & METALLURGY MARINE

Hole Geometry Effects-1Additive Manufacturing and

Certification of Additive Manufacturing Parts

Design and Development

Paper Session • Room 308A • WC-19-1 Panel Session • Room 402 • WC-21-10 Paper Session • Room 318A • WC-22-1

Session Organizer: Yong Kim, Solar Tur-bines IncSession Co-Organizer: Jae Um, Siemens Energy

Session Chair: Michael Gorelik, FAASession Co-Chair: Laurent Cretegny, Gener-al Electric

Session Chair: Morgan Hendry, SSS Clutch Company, Inc.Session Co-Chair: Sangpil Lim, Rolls Royce Marine Korea

2:30

Application of S-PIV for Investigation of Round and Shaped Film Cooling Holes at High Density Ratios GT2016-56209 Travis Watson, Sara Nahang-Toudeshki,

Lesley Wright, Dan Crites, Mark Morris, Ar-deshir Riahi

Academic Perspective on Additive Manu-facturing GT2016-58336 Dong-Yol Yang, KAIST, Seoul, Korea (Republic)

Investigation of Performance of High Ve-locity Air Intake Wave-plate Separators for Marine Gas Turbines GT2016-56220 Yigang Luan, Yang Ni, Huannan Liu, Shi Bu,

Haiou Sun, Harbin Engineering University, Har-bin, China

3:00

The Effect of a Meter-Diffuser Offset on Shaped Film Cooling Hole Adiabatic Ef-fectiveness GT2016-56135 Shane Haydt, Pennsylvania State University,

University Park, PA, United States, Stephen Lynch, Penn State University, University Park, PA, United States, Scott Lewis, Pratt & Whitney, East Hartford, CT, United States

A path toward the industrial adoption of metal additive manufacturing technology GT2016-58318 Yong Yang, General Electric, Shanghai, China

Experimental Investigation of Variable Geometry Turbine Annular Cascade for Marine Gas Turbines GT2016-56726 Xiying Niu, Chen Liang, Xuemei Jing, Jia Wei,

Kaidi Zhu, Harbin Marine Boiler and Turbine Re-search Institute, Harbin/Heilongjiang, China

3:30

Effects of Freestream Mach Number, Reynolds Number, and Boundary Layer Thickness on Film Cooling Effectiveness of Shaped Holes GT2016-56152 Josh Anderson, Ellen Wilkes, John McClintic,

David Bogard

Research on Characteristics of a new type of Marine Gas Turbine Exhaust Ejector De-vice GT2016-57214 Tao Sun, LANXIN SUN, Yigang Luan, PENG Sun,

Harbin Engineering University, Harbin, Heilong-jiang, China

4:00

An Investigation of Turbine Film Cool-ing Effectiveness With Shaped Holes and Internal Cross-Flow With Varying Operational Parameters GT2016-56162 Ellen Wilkes, The University of Texas, Aus-

tin, TX, United States, Josh Anderson, John McClintic, The University of Texas at Austin, Austin, TX, United States, David Bogard, Univ Of Texas At Austin, Austin, TX, United States

Siemens perspective on Additive Manufac-turing GT2016-58338 Ingomar Kelbassa, Siemens AG, Berlin, Berlin,

Germany

orking Process Control in a Ship Gas Tur-bine Engine of Complex Cycle GT2016-56073 Valerii Matviienko, Nakhimov Naval School,

Sevastopol, Russia, Volodimir Ocheretianyi, Sevastopol State University, Sevastopol, Russia, Oleksandr Andriets, National Aviation Univer-sity, Kyiv, Ukraine, Sergiy Riznyk, SE Ivchenko Progress, Zaporozhye 69068, Ukraine

4:30

Experimental Investigation on the In-fluence of Inclination Angle on the Film Cooling Performance of Diffuser Shaped Holes GT2016-56092 Cunliang Liu, Yingni Zhai, Hui-ren Zhu, A-sai

Wu

Rapid Qualification for Additive Manufac-turing Processes GT2016-58337 Michael Enright, Southwest Research Inst, San

Antonio, TX, United States

The Influence of Upstream Turbulence In-tensity on the Near- and Far-Wake Struc-ture of Tidal Stream Turbines GT2016-57025 Mohammad Ahmadi, University of Dundee,

Dundee, United Kingdom

5:00

Combined Influence of Surface Deposi-tion and Hole-Blockage on Film-Cooling Performances GT2016-56902 Xue-yi Wang, Jian Pu, Rui-ming Yuan, Jian-

hua Wang

Thermal Stability of Nickel-Base Alloys GT2016-57991 David Shifler, Office of Naval Research, Arling-

ton, VA, United States, Sung Choi, Naval Air Systems Command, Patuxent River, MD, United States, Rabindra Mahapatra, David Faucett, Nesredin Kedir, Luis Sanchez, NAVAIR, Patux-ent River, MD, United States

102 | ASME 2016 TURBO EXPO

WEDNESDAY, JUNE 15 2:30 - 5:30 PM

OIL & GAS APPLICATIONS OIL & GAS APPLICATIONS ORGANIC RANKINE CYCLE POWER SYSTEMS

Turbomachinery Instrumentation Components,

Practices, and Uncertainty Oil & Gas Applications ORC Power System Components

Tutorial Session • Room 317A • WC-24-9 Tutorial Session • Room E5 • WC-24-17 Paper Session • Room 317B • WC-25-2

Session Chair: Tim Allison, Southwest Re-search Institute,Session Co-Chair: Jason Wilkes, South-west Research Institute, Michele Pinelli, University of Ferrara

Session Chair: Rainer Kurz, Solar Turbines IncorporatedSession Co-Chair: Klaus Brun, Southwest Re-search Institute

Session Chair: Teemu Turunen-Saaresti, Lappeenranta University of TechnologySession Co-Chair: Arthur Leroux, ENOGIA SAS

2:30

T

U

T

O

R

I

A

L

T

U

T

O

R

I

A

L

Thermodynamic analysis of Organic Ran-kine Cycle (ORC) systems based on turbine performance prediction GT2016-56545 Jian Song, Chunwei Gu, Tsinghua University,

Beijing, Beijing, China

3:00

Development and Design of a Two-Stage Contraction Zone and Test Section of an Organic Rankine Cycle Wind Tunnel GT2016-56580 Maximilian Passmann, Karsten Hasselmann,

Felix Reinker, Stefan aus der Wiesche, Franz Joos

3:30

Experimental Investigation of a Non-Ideal Expansion Flow of Siloxane Vapor MDM GT2016-57357 Andrea Spinelli, Fabio Cozzi, Marta Zocca, Paolo

Gaetani, Vincenzo Dossena, Alberto Guardone, Politecnico Di Milano, milano, italy, Italy

4:00

Development of Efficient Small Scale Axial Tur-bine for Solar Driven Organic Rankine Cycle GT2016-57845 Ayad Al Jubori, Raya AL-Dadah, Saad Mah-

moud, University of Birmingham, Birming-ham, West Midlands, United Kingdom, KHALIL KHALIL, University of Birmingham, ,BIRMING-HAM, West Midlands, United Kingdom, Ali Bahr Ennil, University of Birmingham, Birmingham, West Midlands, United Kingdom

4:30

5:00

Preliminary Design of the Orchid: A Facility for Studying Non-Ideal Compressible Fluid Dynamics and Testing ORC Expanders GT2016-56103 Adam Head, Delft University of Technology,

Delft, Netherlands, Carlo De Servi, TU Delft, Delft, Netherlands, Emiliano Casati, Matteo Pini, Piero Colonna, Delft University of Technology, Delft, Zuid-Holland, Netherlands

FINAL PROGRAM | 103

WEDNESDAY, JUNE 15 2:30 - 5:30 PM

STEAM TURBINES STRUCTURES & DYNAMICS: BEARING & SEAL DYNAMICS

STRUCTURES & DYNAMICS: STRUCTURAL MECHANICS,

VIBRATION & DAMPING

Advances in Design Methods and Manufacturing Technology

for Steam TurbinesBearings - Gas Bearings 2 Rotor-Stator Interaction

Panel Session • Room 403 • WC-26-14 Paper Session • Room 300 • WC-31-2 Paper Session • Room 307C • WC-32-9

Session Chair: Damian Vogt, University of StuttgartSession Co-Chair: Tao Guo, GE

Session Chair: Mihai Arghir, Universite De Poitiers - Instit PprimeSession Co-Chair: Keun Ryu, Hanyang Uni-versity, Ansan

Session Chair: Stefano Zucca, Politecnico Di Torino - DIMEASSession Co-Chair: Stefan Schmitt, Siemens

2:30

Advances in Design Methods and Man-ufacturing Technology for Steam Tur-bines GT2016-58328 Eiichiro Watanabe, MHPS, Yokohama, Japan

Rotordynamic Performance Measurements and Predictions of a Rotor Supportedon Multilayer Gas Foil Journal Bearings for Microturbomachinery GT2016-56283 Jongsung Lee, Young Min Kim, Moon Sung Park,

Tae Ho Kim, Kyoung ku Ha, Changha Lee, Sae Hoon Kim

Support Vibration Diagnostics and Limits in Gas Turbines GT2016-56548 Marcin Bielecki, General Electric, Warszawa,

Poland, Salvatore Costagliola, General Electric, Florence, Italy, Piotr Gebalski, General Electric, Warsaw, Poland

3:00

Advances in Design Methods and Man-ufacturing Technology for Steam Tur-bines GT2016-58329 Thomas Thiemann, Siemens AG, Mulheim An

Der Ruhr, Germany

Duffing's Vibration of a Rotor Supported on Gas Foil Bearings With Base Excitation: Measurements and Model Predictions GT2016-56281 Tae Ho Kim, Young Min Kim, Jongsung Lee, Moon

Sung Park, Kookmin University, Seoul, Korea (Re-public), Kyoung ku Ha, Hyundai Motor Group, Yongin-si, Korea (Republic), Changha Lee, Chimyung Kim, Hyundai Motors, Yongin-Si, Korea (Republic)

Full 3D Rotor/Stator Interaction Simula-tions in Aircraft Engines With Time Depen-dent Angular Speed GT2016-56715 Alain Batailly, École Polytechnique de Montréal,

Montréal, QC, Canada, Mathias Legrand, McGill University, Montreal, QC, Canada, Christophe Pierre, University of Illinois, Urbana, IL, United States

3:30

Design Steam Turbine for large fossil power plant GT2016-58331 Seong Jong Yang, Doosan Heavy Industries &

Co., Changwon, Korea (Republic)

Identification of Dynamic Characteristics of Gas Foil Thrust Bearings Using Base Excitation GT2016-56282 Tae Ho Kim, Moon Sung Park, Jongsung Lee,

Young Min Kim, Kookmin University, Seoul, Ko-rea (Republic), Kyoung ku Ha, Hyundai Motor Group, Yongin-si, Korea (Republic), Jeonghee Park, Changha Lee, Chimyung Kim, Hyundai Mo-tors, Yongin-Si, Korea (Republic)

Experimental and Numerical Simulation of a Contact Induced Rotor/Stator Inter-action Inside an Aircraft Engine High-Pres-sure Compressor GT2016-56718 Alain Batailly, École Polytechnique de Montréal,

Montréal, QC, Canada, Quentin Agrapart, An-toine Millecamps, Snecma, Moissy-Cramayel, France

4:00

Advances in Design Methods and Man-ufacturing Technology for Steam Tur-bines GT2016-58339 Jiandao Yang, Shanghai Turbine Works Co.,

Ltd, Shanghai, China

Effect of Top Foil Sagging on the Perfor-mance of Air Thrust Foil Bearings With Partial Bump Supports GT2016-56493 Fangcheng Xu, Daejong Kim, Behzad Zamanian

Yazdi, University of Texas at Arlington, Arling-ton, TX, United States

Minimising Clearance Consumption: A Key Factor for the Design of Blades Robust to Rotor/Stator Interactions? GT2016-56721 Alain Batailly, École Polytechnique de Montréal,

Montréal, QC, Canada, Antoine Millecamps, Snecma, Moissy-Cramayel, France

4:30

Three-Dimensional Turbulent Ther-mo-Elastohydrodynamic Analyses of Hy-bridThrust Foil Bearings using Real Gas Model GT2016-57766 Fangcheng Xu, Daejong Kim, University of Texas

at Arlington, Arlington, TX, United States

5:00

Advances in Design Methods and Man-ufacturing Technology for Steam Tur-bines GT2016-58340 Ivan Mcbean, General Electric, 5454 Bellikon,

Switzerland

Impact of Bearing Clearance on Measured Stiffness and Damping Coefficients and Thermal Performance of a High-Stiffness Generation 3 Foil Journal Bearing GT2016-56478 Jason Wilkes, Jonathan Wade, Aaron Rimpel,

Jeff Moore, Erik Swanson, Joseph Grieco, Jerry Brady, BP,

Parametric Bird Strike Study of a Transon-ic Rotor Using Isogeometric Analysis GT2016-57464 Sam Duckitt, ALE Delft, Delft, Netherlands,

Shahrokh Shahpar, Rolls-Royce plc., Derby, Unit-ed Kingdom, Chiara Bisagni, Delft University of Technology, Delft, OO, Netherlands

104 | ASME 2016 TURBO EXPO

WEDNESDAY, JUNE 15 2:30 - 5:30 PM

STUDENT ADVISORY SUPERCRITICAL CO2 POWER CYCLES

TURBOMACHINERY: AXIAL FLOW TURBINE

AERODYNAMICS

Careers in Turbomachinery sCO2 Turbomachinery Design Aerodynamic Losses

Panel Session •Third Floor Auditorium • WC-35-1 Tutorial Session • Room E5 • WC-36-9 Paper Session • Room 318C • WC-38-1

Panelists: Dr. Alexander Mirzamogha-dam, Honeywell, Dr. Lamyaa El-Gabry, American University in Cairo, Dr. Klaus Brun, Southwest Research Institute, Dr. Hany Moustapha, AÉROÉTS, Dr. Seung Jin Song, Seoul National University

Session Chair: Jeff Moore, Southwest Re-search Institute

Session Chair: Sergio Lavagnoli, Von Karman Inst for Fluid DynamicsSession Co-Chair: Jose Maria Rey Villazon, GE Aviation

2:30

T

U

T

O

R

I

A

L

T

U

T

O

R

I

A

L

The Investigations of the Balance Hole Area and Radial Seal Clearance's Influ-ences on Turbine Efficiency in the Wheel Chamber GT2016-56102 Guoliang Deng, Qi Sun, Shan Wang, Chaoyang

Tian, Qi Wu, Xiaodan Zhang, Xiaoqin Du

3:00

Experimental and Numerical Investiga-tion of Unsteady Structures Within the Rim Seal Cavity in the Presence of Purge Mass Flow GT2016-56500 Cengiz Camci, Penn State University, University

Park, PA, United States, Jason Town, Michael Averbach, The Pennsylvania State University, University Park, PA, United States

3:30

Influence of a Shroud Axisymmetric Slot Injection on a High Pressure Turbine Flow GT2016-56608 Etienne Tang, Turbomeca, Bordes, France, Isa-

belle Trebinjac, LMFA - Ecole Centrale de Lyon, Ecully, France, Ghislaine Ngo Boum, Ecole Cen-trale de Lyon-LMFA, Ecully, France, Gilles Leroy, Turbomeca, Bordes Cedex, France, Mickael Phi-lit, Turbomeca, Bordes, France

4:00

Modulation and Radial Migration of Tur-bine Hub Cavity Modes by the Rim Seal Purge Flow GT2016-56661 Rainer Schädler, Anestis I. Kalfas, Reza S.

Abhari, Gregor Schmid, Stefan Völker

4:30

High-Pressure Turbine Rim Seal Design for Increased Efficiency GT2016-57495 Martin Chilla, Howard Hodson, Graham Pullan,

David Newman

5:00

Experimental Investigation of Turbine Stage Flow Field and Performance at Varying Cavity Purge Rates and Operating Speeds GT2016-57735 Johan Dahlqvist, Royal Institute of Technology,

Stockholm, Sweden, Jens Fridh, KTH Royal Insti-tute of Technology, Stockholm, Sweden

FINAL PROGRAM | 105

WEDNESDAY, JUNE 15 2:30 - 5:30 PM

TURBOMACHINERY: DESIGN METHODS & CFD MODELING

FOR TURBOMACHINERY

TURBOMACHINERY: RADIAL TURBOMACHINERY

AERODYNAMICS

TURBOMACHINERY: UNSTEADY FLOWS IN TURBOMACHINERY

Throughflow and Preliminary Design Methods

Radial Compressors - Map Width Enhancement Unsteady Flows in Turbines III

Paper Session • Room E2 • WC-39-6 Paper Session • Room E1 • WC-42-6 Paper Session • Room E4 • WC-44-3

Session Chair: Akin Keskin, Rolls-Royce Session Chair: Luca Porreca, MAN Die-sel&TurboSession Co-Chair: Christian Aalburg, GE

Session Chair: Lubomir Ribarov, UTC AEROSPACE SYSTEMS

2:30

A Database of Optimal Airfoils for Axial Compressor Throughflow Design GT2016-56241 Markus Schnoes, German Aerospace Center,

Cologne, Germany, Eberhard Nicke, DLR, Co-logne, Germany

Effect of Exit Pressure Pulsation on the Performance and Stability Limit of a Tur-bocharger Centrifugal Compressor GT2016-56109 Maria Esperanza Barrera-Medrano, Peter New-

ton, Ricardo Martinez-Botas, Srithar Rajoo, Isao Tomita, Seiichi Ibaraki

Detailed Numerical Characterization of the Suction Side Laminar Separation Bubble for a High-Lift Low Pressure Turbine Blade by Means of RANS and LES GT2016-56653 Fabio Bigoni, Stefano Vagnoli, Tom Verstraete,

Tony Arts

3:00

An Aero-Thermal Coupled Throughflow Method for Convective Cooled Turbines GT2016-56563 Chunwei Gu, Haibo Li, Wei Ba, Xiaodong Ren,

Tsinghua University, Beijing, Chinas

Flow Loss Mechanism And Modeling In A Centrifugal Compressor Casing GT2016-56243 Mingxu QI, Beijing Institute of Technology, Bei-

jing, Beijing, China, Liangjun Hu, Ford Motor Company, Dearborn, MI, United States, Harold Sun, Ford Motor Company, W Bloomfield, MI, United States, Margaret Wooldridge, Univ Of Michigan, Ann Arbor, MI, United States

Investigation of Bypass Transition in the Presence of a Separation Bubble With To-mographic PIV GT2016-57884 Christoph Lyko, Technische Universität Berlin, Ber-

lin, Germany, Dirk Michaelis, Mirko Dittmar, LaVi-sion, Göttingen, Germany, Dieter Peitsch, Tech-nische Universität Berlin, Berlin, Berlin, Germany

3:30

Development of an Improved Stream-line Curvature Approach for Transonic Axial Compressor GT2016-57072 WU XIAOXIONG, Bo Liu, SHI LEI, ZHANG

GUOCHEN, Mao xiaochen

Multi-Point Optimization of Recirculation Flow Type Casing Treatment in Centrifugal Compressors GT2016-56610 Min Thaw Tun, Daisaku Sakaguchi, Nagasaki

University, Nagasaki, Nagasaki, Japan, Ryusuke Numakura, Baotong Wang, IHI Corporation, Yo-kohama, Japan

Performance Metric for Turbine Stage Un-der Unsteady Pulsating Flow Environment GT2016-56343 Jinwook Lee, C.S. Tan, Borislav Sirakov, Chris

Wilkins, Hong-Sik Im, Martin Babak, Denis Tis-serant

4:00

Multistage Axial Compressor Flow Field Predictions Using CFD and Through-Flow Calculations GT2016-57632 Milan Banjac, Milan Petrovic, University of

Belgrade, Belgrade, Serbia, Alexander Wie-dermann, MAN Diesel & Turbo SE, Oberhau-sen, Germany

Numerically Derived Design Guidelines of Self Recirculation Casing Treatment for In-dustrial Centrifugal Compressors GT2016-56672 Sewoong Jung, Robert Pelton, Hanwha Techwin,

Houston, TX, United States

erformance Characterization of Twin Scroll Turbine Stage for Vehicular Turbo-charger Under Unsteady Pulsating Flow Environment GT2016-56401 Jinwook Lee, C.S. Tan, Borislav Sirakov, Chris

Wilkins, Hong-Sik Im, Martin Babak, Denis Tis-serant

4:30

A One-Dimensional Analytical Method for Turbine Blade Preliminary Cooling Design GT2016-56783 Chen Li, Institute of Engineering Thermo-

physics, Chinese Academy of Sciences, Beijing, China, Jian-Jun Liu, Institute of Engineering Thermophysics, Beijing, China

Characterizing Flow Effects of Ported Shroud Casing Treatment on Centrifugal Compressor Performance GT2016-57070 George Christou, C.S. Tan, Massachusetts In-

stitute of Technology, Cambridge, MA, United States, Borislav Sirakov, Honeywell Turbo Tech-nologies, Torrance, CA, United States, Vai Man Lei, Giuseppe Alescio, Honeywell, Torrance, CA, United States

A research on Waste-gated turbine perfor-mance under unsteady flow condition GT2016-57870 Qiyou Deng, Richard Burke, Qingning Zhang,

University of Bath, Bath, Avon, United Kingdom, Ludek Pohorelsky, Honeywell spol. s.r.o. (CZE), Brno, Czech Republic

5:00

Performance Prediction and Early De-sign Code for Axial Turbines and its Ap-plication in Research and Predesign GT2016-56082 Alexander Krumme, German Aerospace Cen-

ter DLR, Goettingen, Germany

Influence of Unsteady Wakes on the Sec-ondary Flows in the Linear T106 Turbine Cascade GT2016-56350 Ilker Kirik, Reinhard Niehuis, University of the

German Armed Forces Munich, Neubiberg, Ger-many

106 | ASME 2016 TURBO EXPO

WEDNESDAY, JUNE 15 2:30 - 5:30 PMTURBOMACHINERY:

MULTIDISCIPLINARY DESIGN APPROACHES,

OPTIMIZATION & UNCERTAINTY QUANTIFICATION

Uncertainty Quantification

Paper Session • Room 318B • WC-45-6

Session Chair: Francesco Montomoli, Im-perial College LondonSession Co-Chair: Andrea Milli, Generla Electric Aviation

2:30

Uncertainty Quantification of Heat Transfer for a Highly Loaded Gas Tur-bine Blade Endwall Using Polynomial Chaos GT2016-56575 Peiyuan Zhu, Yong Yan, LIMING SONG, Jun

Li, Zhenping Feng

3:00

ANALYTICAL UNCERTAINTY ANALY-SIS FOR HOT-WIRE MEASUREMENTS GT2016-56623 Christian Hösgen, Stephan Behre, Herwart

Hoenen, Peter Franz Jeschke

3:30

Analysis of High Pressure Turbine Noz-zle Guide Vanes Considering Geometric Variations GT2016-57502 Lars Högner, Paul Voigt, Alkin Nasuf, Mat-

thias Voigt, Marcus Meyer, Frederic Goena-ga, Christopher Berridge, Konrad Vogeler

4:00

A Single Formulation for Uncertainty Propagation in Turbomachinery: SAM-BA PC GT2016-56573 Richard Ahlfeld, Francesco Montomoli, Impe-

rial College London, London, United Kingdom

4:30

mpact of Manufacturing Variability on the Aerodynamic Performance of a Cen-trifugal Compressor Stage With Curvi-linear Blades GT2016-57791 Andrea Panizza, Roberto Valente, Dante

Tommaso Rubino,, Libero Tapinassi

5:00

Flow Analysis and Uncertainty Quan-tification of a 2D Compressor Cascade With Dirty Blades GT2016-56915 Ruihong Qin, Yaping Ju, Yazhou Wang,

Chuhua Zhang, Xi’an Jiaotong University, Xi’an, Shannxi, China

FINAL PROGRAM | 107

THURSDAY, JUNE 16 8:00 - 10:00 AM

AIRCRAFT ENGINE COAL, BIOMASS & ALTERNATIVE FUELS

COMBUSTION, FUELS & EMISSIONS

Whole Engine Performance and Novel Concepts Heavy Liquid Fuels Premixed Flames

Paper Session • Room 318B • ThA-1-10 Paper Session • Room 308B • ThA-3-3 Paper Session • Room 317C • ThA-4-3

Session Chair: Ioannis Roumeliotis, Hel-lenic Naval AcademySession Co-Chair: Anders Lundbladh, GKN Aerospace

Session Chair: Francesco Fantozzi, Universi-ty of Perugia, Dip. Ingegneria IndustrialeSession Co-Chair: Marina Braun-Unkhoff, German Aerospace Center (DLR)

Session Chair: K Doebbeling, Ansaldo Ener-gia

8:00

Performance Investigation of Cycle-In-tegrated Parallel Hybrid Turboshafts GT2016-57539 Patrick Vratny, Sascha Kaiser, Arne Seitz,

Bauhaus Luftfahrt e.V., Ottobrunn, Germany, Stefan Donnerhack, MTU Aero Engines AG, Munich, Germany

Comparison of Methanol and Kerosene Combustion in a Swirl Stabilized Spray Combustor GT2016-56070 Yeshayhaou Levy, Technion, Haifa 32000, Israel,

Vladimir Erenburg, Technion:- Israel Institute of Technology, Haifa, Israel, Alex Roizman, Tech-nion - Israel Institute of Technology, Haifa, Isra-el, Valery Sherbaum, Technion:- Israel Institute of Technology, Haifa, Israel, Vitaly Ovcharenko, Technion: -Israel Institute of Technology, Haifa, Israel

Effect of Quarl on N2- and CO2-Diluted Methane Oxy-Flames Stabilized by an Ax-ial-Plus-Tangential Swirler GT2016-56953 Paul Jourdaine, EM2C laboratory, Châte-

nay-Malabry, France, CLEMENT MIRAT, ECOLE CENTRALESUPELEC - CNRS -EM2C, Chatenay Malabry, France, Jerome Beaunier, ECOLE CEN-TRALESUPELEC - CNRS -EM2C, Châtenay-Ma-labry, France, Jean Caudal, Youssef Joumani, Air Liquide, Les Loges-en-Josas, France, Thierry Schuller, CNRS and Ecole Centralesupelec, Chat-enay-Malabry, France

8:30

Potential of Micro Turbine Based Pro-pulsion Systems for Civil UAVs: A Case Study GT2016-57719 Anna Marcellan, Wilfried Visser, Piero Col-

onna, Delft University of Technology, Delft, Netherlands

Improving the efficiency of heavy-fuelled gas turbines: the successful experience achieved at the Yugadanavi 300 MW CCGT in Sri Lanka GT2016-56531 Michel Molière, Nuhuman Marikkar, Matthieu

Vierling, Maher Aboujaib, Christophe Verdy, Dmitry Sokolov, Bruno Monetti, Donald Meskers, Robert Russell

Flame Holding in the Premixing Zone of a Gas Turbine Model Combustor After Forced Ignition of H2-NG-Air-Mixtures GT2016-56246 Matthias Utschick, Technische Universität

München, Garching, Germany, Thomas Sattel-mayer, Technical Univ Munich, Garching, Ger-many

9:00

Unified Thermodynamic Evaluation of Radical Aero Engine Cycles GT2016-56313 Sascha Kaiser, Arne Seitz, Patrick Vratny,

Mirko Hornung, Bauhaus Luftfahrt E.V., Ot-tobrunn, Germany

Combustion of Aldehydes in the Negative Temperature Coefficient Region: Products and Pathways GT2016-58025 Ghazal Barari, Batikan Koroglu, Artëm Masu-

nov, Subith Vasu, University of Central Florida, Orlando, FL, United States

A Comparison of Turbulent Flame Speed Correlations for Hydrocarbon Fuels at El-evated Pressures GT2016-57804 Eoin Burke, Mechanical Engineering and Com-

bustion Chemistry Centre, Galway, Ireland, Rory Monaghan, Combustion Chemistry Centre, Gal-way, Ireland, Felix Guethe, General Electric Pow-er, CH-5401 Baden, Switzerland

9:30

Thermo-Dynamic Multi-Criteria Optimi-zation of the Unified Engine Core for the Line of Turbofan Engines GT2016-57854 Viktor Rybakov, Venedikt S. Kuz’michev,

Andrey Y. Tkachenko, Ilia N. Krupenich, Sa-mara State Aerospace University (SSAU), Sa-mara, Russia

Influence of Residence Time on Fuel Spray Sauter Mean Diameter (SMD) and Emis-sions Using Biodiesel and Its Blends in a Low NOx Gas Turbine Combustor GT2016-58148 Mohamed A. Altaher, Hu Li, The University of

Leeds, Leeds, United Kingdom, Gordon E. An-drews, Univeristy of Leeds, Leeds, United King-dom

Determination of Laminar Flame Speed and Markstein Numbers Deduced From Turbulent Flames Using the Bomb Method GT2016-57305 Tobias M. Baust, Karlsruhe Institute of Tech-

nology, Karlsruhe, Germany, Nikolaos Zarzalis, Karlsruhe Inst. of Tech., Division of Comb. Tech., Karlsruhe, Germany, Peter Habisreuther, Karl-sruhe Institute of Technology, Engler-Bunte-In-stitute, Karlsruhe, Germany

108 | ASME 2016 TURBO EXPO

THURSDAY, JUNE 16 8:00 - 10:00 AM

COMBUSTION, FUELS & EMISSIONS CYCLE INNOVATIONS HEAT TRANSFER: NUMERICAL

FILM COOLING

Flashback & Blowout Cycles for Propulsion Numerical Film Cooling IV

Paper Session • Room E3 • ThA-4-7 Paper Session • Room 317A • ThA- 6-4 Paper Session • Room 301 • ThA- 12-4

Session Chair: Leiyong Jiang, National Research CouncilSession Co-Chair: Rudolph Dudebout, Honeywell Aerospace, Yinghua Han, NRC Aerospace

Session Chair: Alexander Heidebrecht, Cranfield University

Session Organizer: Mounir Ibrahim, Cleve-land State UniversitySession Co-Chair: Hyung-hee Cho, Yonsei Univ.

8:00

Prediction of Confined Flame Flashback Limits Using Boundary Layer Separa-tion Theory GT2016-56155 Vera Hoferichter, TU München, LS für Ther-

modynamik, Garching, Germany, Christoph Hirsch, TU München, München, Germany, Thomas Sattelmayer, Technical Univ Munich, Garching, Germany

Ultra Low Emission Technology Innovations for Mid-Century Aircraft Turbine Engines GT2016-56123 Tomas Grönstedt, Carlos Xisto, Oliver Schmitz,

Stefan Donnerhack, Anders Lundbladh, Kyros Yakinthos, Arne Seitz, Vishal Sethi, Andrew Rolt, Paul Newton, Nicolas Tantot, Nicolas García Rosa

Large Eddy Simulation of Inclined Jet in Cross Flow With Cylindrical and Fan-Shaped Holes GT2016-56840 Lingxu Zhong, Chao Zhou, Shiyi Chen, Peking

University, Beijing, China

8:30

Influence of Boundary Layer Air Injec-tion on Flashback of Premixed Hydro-gen-Air Flames GT2016-56156 Vera Hoferichter, TU München, LS für Thermo-

dynamik, Garching, Germany, Payam Moham-madzadeh Keleshtery, LS für Thermodynamik/TU München, Garching, Germany, Christoph Hirsch, TU München, München, Germany, Thomas Sattelmayer, Technical Univ Munich, Garching, Germany, Yoshikazu Matsumura, Mitsubishi Hitachi Power Systems, Kobe, Hyo-go, Japan

Evaluation of the Cycle Averaged Per-formances of a Pulsed Detonation Engine Based on Thermodynamic Cycle Computa-tions GT2016-57310 Cleopatra Cuciumita, COMOTI Romanian R&D

Institute for Gas Turbines, Bucharest, Romania, Ionut Porumbel, INCDT COMOTI, Bucharest, Ro-mania, Tudor Cuciuc, Institut of Applied Physics, Chisinau, Moldova - Republic Of

Comparison of RANS and DES Modeling Against Measurements of Leading Edge Film Cooling on a First-Stage Vane GT2016-57567 Silvia Ravelli, University of Bergamo, Dalmine,

Italy, Giovanna Barigozzi, Universita’ Di Berga-mo, Dalmine, Italy

9:00

Predicting Flashback Limits of a Gas Turbine Model Combustor Based on Velocity and Fuel Concentration for H2-Air-Mixtures GT2016-56245 Matthias Utschick, Daniel Eiringhaus, Chris-

tian Köhler, Technische Universität München, Garching, Germany, Thomas Sattelmayer, Technical Univ Munich, Garching, Germany

An Outlook for Radical Aero Engine Inter-cooler Concepts GT2016-57920 Olivier Petit, Chalmers University of Technology,

Gothenbourg, Sweden, Carlos Xisto, Chalmers University of Technology, Göteborg, Sweden, xin zhao, chalmers university of technology, Gothen-bourg, Sweden, Tomas Grönstedt, Chalmers Uni-versity, Gothenburg, Sweden

Investigation of Steady and Unsteady Film-Cooling Using Immersed Mesh Blocks With New Conservative Interface Scheme GT2016-57363 Y Jiang, Li He, University of Oxford, Oxford, Unit-

ed Kingdom, Luigi Capone, Rolls-Royce, plc., Der-by, United Kingdom, Ed Romero, Rolls Royce plc, Bristol, United Kingdom

9:30

Application of a Turbulent Jet Flame Flashback Propensity Model to a Com-mercial Gas Turbine Combustor GT2016-58059 Alireza Kalantari, Elliot Sullivan-Lewis,

Vince McDonell, UCI Combustion Laboratory, Irvine, CA, United States

FINAL PROGRAM | 109

THURSDAY, JUNE 16 8:00 - 10:00 AM

HEAT TRANSFER: INTERNAL AIR SYSTEMS & SEALS (WITH

TURBOMACHINERY)

HEAT TRANSFER: EXPERIMENTAL INTERNAL

COOLINGINDUSTRIAL & COGENERATION

Brush and Miscellaneous Seals Experimental Internal Cooling: Impingement Cooling II Combustion & Emissions

Paper Session • Room 307B • ThA- 15-5 Paper Session • Room 307A • ThA- 16-2 Tutorial Session • Room 401 • ThA-20-7

Session Organizer: Stacie Tibos, GE Pow-erSession Co-Chair: James Scobie, Univer-sity of Bath

Session Organizer: Andrew Nix, West Vir-ginia UniversitySession Co-Chair: Kenichiro Takeishi, Tokushima Bunri University

Session Chair: Manfred Klein, MA Klein & Associates, OttawaSession Co-Chair: Mike KlassenSession Co-Organizer: Len Angello

8:00

Brush Seal Frictional Heat Generation: Test Rig Design and Validation Under Steam Environment GT2016-56951 Markus Raben, TU Braunschweig - Insti-

tute of Jet Propulsion and Turbomachinery, Braunschweig, Germany, Jens Friedrichs, TU Braunschweig Inst of Aircraft Propulsion & Turbomachinery, Braunschweig, Germany, Johan Flegler, Siemens AG, Power and Gas Di-vision, Muelheim an der Ruhr, Germany

The Effect of Particle Loading, Size, and Temperature on Deposition in a Vane Lead-ing Edge Impingement Cooling Geometry” GT2016-57413 Steven Whitaker, Blair Peterson, Alex Miller,

The Ohio State University, Columbus, OH, United States, Jeffrey Bons, Ohio State Univ, Columbus, OH, United States

Combustion Basics GT2016-58368 Mike Klassen, Combustion Science & Engineering

Inc., Columbia, MD, United States

8:30

Characterization of Brush Seal Permea-bility GT2016-57910 Thomas Gresham, University of Virginia,

Charlottesville, VA, United States, Brian Weaver, University of Virginia, Afton, VA, United States, Houston Wood, Univ Of Vir-ginia, Charlottesville, VA, United States, Alex-andrina Untaroiu, Virginia Tech, Blacksburg, VA, United States

Experimental Investigation on Impinge-ment Array Cooling Systems Through IR Thermography GT2016-57436 Lorenzo Tarchi, Ergon Research SRL, Firenze,

Italy, Lorenzo Cocchi, Bruno Facchini, Lorenzo Winchler, University of Florence, Florence, Italy, Luca Innocenti, GE Oil & Gas, Florence, Italy, Luca Andrei, GE Oil&Gas, Firenze, Italy, Alessio Bonini, GE Oil & Gas, Florence, Italy, Sabrina Giuntini, University of Florence, Florence, Italy

Emissions Prevention and Control GT2016-58369 Len Angello, Electric Power Research Institute,

Palo Alto, CA, United States

9:00

Theoretical Analysis of the Static Char-acteristics of the Carbon Segmented Seal GT2016-56643 Mihai Arghir, Universite De Poitiers - Instit

Pprime, D3, Futuroscope Chasseneuil 86962, France, Antoine Mariot, Institut PPRIME, Université de Poitiers, Futuroscope Chasse-neuil, France

Experimental Investigation of Heat Trans-fer Augmentation by Different Jet Impinge-ment Hole Shapes Under Maximum Cross-flow GT2016-57874 Prashant Singh, Bharath Viswanath Ravi, Vir-

ginia Tech, Blacksburg, VA, United States, Srinath Ekkad, Virginia Tech. University, Blacksburg, VA, United States

9:30

Experimental Analyses of a Static to Static Flex Seal and a Honeycomb Seal GT2016-57397 Thomas Zierer, Marcos Escudero-Olano, Cy-

rille Bricaud, Ansaldo Energia Switzerland Ltd., Baden, Switzerland, Joshua McNally, Afzal Pasha Mohammed, PSM, Jupiter, FL, United States

An Experimental Investigation of Impinge-ment Heat Transfer in Narrow Space With Full-Height Pin Fins GT2016-57578 Yu Rao, Shanghai JiaoTong University, Dept. Me-

chanical Eng, Shanghai, China, Chaoyi Wan, Yuy-ang Liu, Shanghai Jiao Tong University, Shang-hai, Not Applicable, China, Jiang Qin, Harbin Institute of Technology, Harbin, China

Emission Regulations GT2016-58370 Manfred Klein, MA Klein & Associates, Ottawa,

ON, Canada

110 | ASME 2016 TURBO EXPO

THURSDAY, JUNE 16 8:00 - 10:00 AM

MARINEMICROTURBINES,

TURBOCHARGERS & SMALL TURBOMACHINES

OIL & GAS APPLICATIONS

Applications & Controls Rotor Dynamics and Small Turbine Transient Behavior

Multiphase Expanders and LNG Systems

Paper Session • Room 318A • ThA- 22-2 Paper Session • Room 308C • ThA-23-2 Paper Session • Room E5 • ThA-24-5

Session Chair: Knox Millsaps, Office of Naval ResearchSession Co-Chair: Desiree Deshmukh, US Navy

Session Chair: Kostandin Gjika, Honeywell Turbo TechnologiesSession Co-Chair: Jurg Schiffman, Ecole Polytechnique Federale de Lausanne

Session Chair: Tim Allison, Southwest Re-search InstituteSession Co-Chair: Rainer Kurz, Solar Tur-bines Incorporated

8:00

Selection and Development of the World’s Most Power-Dense Gas Turbine Module for the New Korean Frigate GT2016-56446 Sangpil Lim, Rolls Royce Marine Korea, Busan,

Korea (Republic), Adam Harvey, Rolls Royce Naval Marine, Bristol, United Kingdom

Rotor-Dynamics of Different Shaft Config-urations for a 6 kW Micro Gas Turbine for Concentrated Solar Power GT2016-56479 Antonio Arroyo, City University London, London,

Click here, United Kingdom, Michael McLorn, Ceres Power Limited, Horsham, United Kingdom, Matthias Fabian, Martin White, Abdulnaser Sayma, City University London, London, Click here, United Kingdom

A Novel Small Scale Liquefied Natural Gas Production Process at Filling Stations: Thermodynamic Analysis and Parametric Investigation GT2016-56463 Maria Alessandra Ancona, University of Bolo-

gna, Bologna, Italy, Michele Bianchi, University Of Bologna, Bologna 40136, Bologna, Italy, Fran-cesco Melino, University of Bologna, Bologna, Italy, Andrea De Pascale, DIN - University Of Bo-logna, Bologna, Italy, Lisa Branchini, University of Bologna, Bologna, Italy, Marco Palella, Mario Mormile, Graf S.p.A., Nonantola (MO), Italy

8:30

Operational Experience of the SSS (Syn-chro-Self-Shifting) Clutch for Naval Ma-rine Applications GT2016-57819 Morgan Hendry, S S S Clutch Co Inc, New Cas-

tle, DE, United States, Nicholas Bellamy, SSS Gears Ltd., Middlesex, United Kingdom

Rotordynamic Performance of a Shaft With Large Overhung Mass Supported by Foil Bearings GT2016-56508 Nguyen LaTray, Daejong Kim, University of Tex-

as at Arlington, Arlington, TX, United States

Influence of Impeller Fairing Cone Geome-try on Cavitating Flow Behavior in a Cryo-genic Liquid Turbine Expander GT2016-56778 Ke Wang, Xi’an Jiaotang Univ, Xi’an, China, jinju

sun, xi’an jiaotong univ, xian, China, peng song, xian jiaotong univ, xian, China, changjiang huo, xi’an jiaotong univ, xi’an, China

9:00

An Alignment Monitoring Device for the Output Shaft of Marine Gas Turbine GT2016-56724 Wen Xue-You, Harbin Marine Blr & Turb Res

Inst, Harbin Heilongjiang 150036, China, XIAO Dong-ming, DONG Bin, Harbin Marine Boiler and Turbin Research Institue, Harbin, China, SONG Zi-gang, Harbin Marine Boiler and tur-bine Research Insititue, Harbin, China, KOU Dan, Haerbin Marine Boiler and Turbine Re-search Institute, Harbin, China

Natural Cooling Affecting the Restart of Micro Gas Turbine GT2016-56 Andrei Tisarev, Samara State Aerospace Univer-

sity, Samara, Russia, Christian Koch, Institute for Aircraft Propulsion Systems University Stuttgart, Stuttgart, Germany, Matthias Nagorski, Stephan Staudacher, Institute of Aircraft Propulsion Sys-tems (ILA), Stuttgart University, Stuttgart, Ger-many, Sergey Falaleev, Samara State Aerospace University, Samara, Russia

Numerical Study of Cavitating Flow in Two-Phase LNG Expander GT2016-56780 peng song, xian jiaotong univ, xian, China, jinju

sun, xi’an jiaotong univ, xian, China, Ke Wang, Xi’an Jiaotang Univ, Xi’an, China, Kaiqiang Li, Henan Electric Power Survey & Design Insti-tute, Zhengzhou, China, changjiang huo, xi’an jiaotong univ, xi’an, China

9:30

A Review on Gas Turbine Anomaly Detection for Implementing Health Mangement GT2016-58135 Ningbo Zhao, Harbin Engineering University,

Harbin, China, Xueyou Wen, Harbin Marine Boiler & Turbine Research Institute, Harbin, China, Shuying Li, Harbin Engineering Uni-versity, Harbin, China

Transient Performance Analysis of an In-dustrial Gas Turbine Operating on Low-Cal-orific Fuels GT2016-57523 Vrishika Singh, Delft University of Technology,

Delft, Netherlands, Lars-Uno Axelsson, OPRA Turbines International B.V., Hengelo, Nether-lands, Wilfried Visser, Delft University of Tech-nology, Delft, Netherlands

Cryogenic Turboexpanders in LNG Lique-faction Applications GT2016-57020 Matt Taher, Bechtel Oil & Gas Chemical, Houston,

TX, United States, Cyrus Meher-Homji, Bechtel Corporation, Houston, TX, United States

FINAL PROGRAM | 111

THURSDAY, JUNE 16 8:00 - 10:00 AM

STEAM TURBINESSTRUCTURES & DYNAMICS:

EMERGING METHODS IN DESIGN & ENGINEERING

STRUCTURES & DYNAMICS: FATIGUE, FRACTURE & LIFE

PREDICTION

LSB Design & Wetness Blade Design for Damping Crack Growth Modeling

Paper Session • Room E2 • ThA-26-4 Tutorial Session • Room E6 • ThA-27-3 Paper Session • Room 300 • ThA- 28-4

Session Chair: Markus Schatz, Universi-ty of StuttgartSession Co-Chair: Shigeki Senoo, Mitsub-ishi Hitachi Power Systems, LTD

Session Chair: Chris Hulme, General Electric (Switzerland) GmbH.Session Co-Chair: Nikola Kafedzhiyski, KTH

Session Chair: Piotr Bednarz, GE Power Ser-vicesSession Co-Chair: Richard Green, Solar Tur-bines Inc, Youri Lenets, Honeywell

8:00

Structural Optimization of Fir-Tree Root and Groove for Turbine Blade With Splines and Genetic Algorithm GT2016-56518 Deqi Yu, Shanghai Electric / Shanghai Turbine

Works Co., Ltd., Shanghai, China, Fengwei Li, Dalian University of Technology, Dalian, Chi-na, Jiandao Yang, Shanghai Turbine Works Co., Ltd, Shanghai, China, Kai Cheng, Shang-hai Electric/Shanghai Turbine Works Co.,Ltd., Shanghai, China, Weilin Shu, Kai Lv, Shang-hai Electric/ Shanghai Turbine Works Co., Ltd., Shanghai, China, Ming Li, Dalian Univer-sity of Technology, Dalian, China

Blade Design for Damping GT2016-58371 Jaroslaw Szwedowicz, GE Power, Bad Zurzach

Ch, Switzerland

FE Analysis of the Effects of TGO Thick-ness and Interface Asperity on the Crack-ing Behavior Between the TGO and the Bond Coat GT2016-56755 Jishen Jiang, Bingqian XU, Weizhe Wang,

RICHARD AMANKWA ADJEI, Xiaofeng ZHAO, Yingzheng Liu, Shanghai Jiao Tong University, Shanghai, China

8:30

Multidisciplinary Optimization Design of Long Blade Turbine Stage Based on Parallel Self-Adaptive Multi-Objective Differential Evolution Algorithm GT2016-56180 Jun Li, Institute of Turbomachinery, Xi’an

Jiaotong Univ., Xi’an, Shaanxi, China, Bin LI, Institute of Turbomachinery, Xi`An Jiaotong University, Xi`An, Shaanxi, Shaanxi, China, LIMING SONG, Xian Jiaotong University, Xian, China, Zhenping Feng, Xi’an Jiaotong University, Shaanxi, Shaanxi, China

A Thermo-Mechanical Fatigue Crack Growth Accumulative Model for Gas Tur-bine Blades and Vanes GT2016-58053 Andrea Riva, Ansaldo Sviluppo Energia, Geno-

va, Italy, Alessio Costa, Ansalo Energia, Genoa, Italy, Dalila Dimaggio, Ansaldo Sviluppo Ener-gia, Genova, Italy, Karl Michael Kraemer, Falk Mueller, Matthias Oechsner, Institut für Werk-stoffkunde (IfW), Technische Universität Darm-stadt, Darmstadt, Germany, Paolo Villari, Ansal-do Sviluppo Energia, Genova, Italy

9:00

Unsteady Flow Field and Coarse Droplet Measurements In The Last Stage Of A Low Pressure Steam Turbine With Su-personic Airfoils Near The Blade Tip GT2016-57753 Ilias Bosdas, Michel Mansour, ETH Zurich,

Zurich, Switzerland, Anestis I. Kalfas, Aris-totle University of Thessaloniki, Thessaloniki, Greece, Reza S. Abhari, ETH Zurich, Zurich, Switzerland, Shigeki Senoo, Mitsubishi Hita-chi Power Systems, LTD, Ibaraki, Japan

An Integrated Software Tool for High Fi-delity Probabilistic Assessments of Metal-lic Aero-Engine Components GT2016-57877 R. Craig McClung, Southwest Research Inst, San An-

tonio, TX, United States, Paul Wawrzynek, Fracture Analysis Consultants, Inc., Ithaca, NY, United States, Yi-Der Lee, Southwest Research Institute, San Anto-nio, TX, United States, Bruce Carter, Fracture Anal-ysis Consultants, Inc., Ithaca, NY, United States, Jon-athan Moody, Southwest Research Institute, San Antonio, TX, United States, Michael Enright, South-west Research Inst, San Antonio, TX, United States

9:30

A Model for Liquid Films in Steam Tur-bines and Preliminary Validations GT2016-56148 Amelie Simon, Meryem Marcelet, Jean-Marc

Herard, Jean-Marc Dorey, R&D EDF, Chatou, France, Michel Lance, LMFA, Ecully, France

A Finite Element Study of the Effect of Crystal Orientation and Misalignment on the Crack Driving Force in a Single-Crystal Superalloy GT2016-56305 Christian Busse, Linköping University,

Linköping, Sweden, Jordi Lourerio Homs, David Gustafsson, Frans Palmert, Siemens Industrial Turbomachinery AB, Finspång, Sweden, Bjorn Sjodin, Siemens Industrial Turbomachinery AB, FINSPONG, Sweden, Johan Moverare, Kjell Si-monsson, Linköping University, Linköping, Swe-den, Daniel Leidermark, Linköping University, Linkoping, Sweden

T

U

T

O

R

I

A

L

112 | ASME 2016 TURBO EXPO

THURSDAY, JUNE 16 8:00 - 10:00 AM

STRUCTURES & DYNAMICS: AERODYNAMIC EXCITATION

& DAMPING

SUPERCRITICAL CO2 POWER CYCLES

TURBOMACHINERY: AXIAL FLOW FAN & COMPRESSOR

AERODYNAMICS

Turbomachine Aeroelasticity and Computational Methods 2 Materials for sCO2 Cycles Flow Control for Stators

Paper Session • Room 307C • ThA- 34-2 Tutorial Session Session • Room 317B • ThA-36-10 Paper Session • Room 403 • ThA-37-11

Session Chair: Sina Stapelfeldt, Rolls-Royce-GermanySession Co-Chair: Mehdi Vahdati, Impe-rial College London

Session Chair: Ganesan Subbaraman, Gas Technology Institute

Session Chair: Nick Nolcheff, HoneywellSession Co-Chair: Sam Grimshaw, Universi-ty of Cambridge

8:00

Flutter Generation and Control Using Mistuning in a Turbine Rotating Rig GT2016-57949 Roque Corral, ITP, Alcobendas (Madrid),

Spain, Josu Beloki, CTA, Zamudio, Spain, Paolo Calza, Avio Aero, Torino, Italy, Robert Elliott, Coquetdale Engineering Consultancy Ltd., UK, United Kingdom

Application of Humpback Whale Flippers in an Annular Compressor Cascade GT2016-56589 Tan Zheng, Xiaoqing Qiang, Jinfang Teng,

Jinzhang Feng, Shanghai Jiao Tong University, Shanghai, China

8:30

Investigations of Flutter and Aero Damping of a Turbine Blade: Part 1 Ex-perimental Characterization GT2016-57930 Charles Seeley, General Electric Research and

Development, Niskayuna, NY, United States, Xue Feng Zhang, GE GRC, Niskayuna, NY, United States, Wei-Min Ren, GE Global Re-search, Niskayuna, NY, United States, Chris-tian Wakelam, GE Global Research, Garching, BY, Germany, Douglas Hofer, GE Global Re-search, Niskayuna, NY, United States

Active Flow Control on a Highly Loaded Compressor Stator Cascade With Synthet-ic Jets GT2016-56830 Yong Qin, Ruoyu Wang, Yanping Song, Fu Chen,

Huaping Liu, Harbin Institute of Technology, Harbin, China

9:00

Investigations of Flutter and Aero Damping of a Turbine Blade: Part 2 Nu-merical Simulations GT2016-57935 Charles Seeley, General Electric Research and

Development, Niskayuna, NY, United States, Wei-Min Ren, GE Global Research, Niskayuna, NY, United States, Xue Feng Zhang, GE GRC, Niskayuna, NY, United States, brian mitchell, hongbin ju, ge global research, niskayuna, NY, United States

Flow Control Investigations of Steady and Pulsed Jets in Bowed Compressor Cas-cades GT2016-56855 Longting Li, Yanping Song, Fu Chen, Huaping

Liu, Harbin Institute of Technology, Harbin, Chi-na

9:30

Shock Structure, Mode Shape, and Geo-metric Considerations for Low-Pressure Turbine Flutter Suppression” GT2016-56706 Joshua Waite, Robert Kielb, Duke University,

Durham, NC, United States

Constrained Repetitive Model Predictive Control Applied to an Unsteady Compres-sor Stator Vane Flow GT2016-56002 Simon J. Steinberg, Technische Universität Ber-

lin, Berlin, Germany, Marcel Staats, TU Berlin, Berlin, Berlin, Germany, Wolfgang Nitsche, Rudi-bert King, Technische Universität Berlin, Berlin, Germany

T

U

T

O

R

I

A

L

FINAL PROGRAM | 113

THURSDAY, JUNE 16 8:00 - 10:00 AM

TURBOMACHINERY: AXIAL FLOW TURBINE

AERODYNAMICS

TURBOMACHINERY: DESIGN METHODS & CFD MODELING FOR

TURBOMACHINERY

URBOMACHINERY: RADIAL TURBOMACHINERY

AERODYNAMICS

Unsteady Flows Novel Steady and Unsteady Methods

Radial Compressors - Performance & Leakage Aspects

Paper Session • Room 327 • ThA-38-8 Paper Session • Room E1 • ThA-39-7 Paper Session • Room E4 • ThA- 42-9

Session Chair: Ken-ichi Funazaki, Iwate UniversitySession Co-Chair: Naoki Tani, IHI corpo-ration, Nishitama-gun

Session Chair: Andrea Milli, Generla Electric AviationSession Co-Chair: Francesco Montomoli, Im-perial College London

Session Chair: Daniel Rusch, ABB Turbo Systems LtdSession Co-Chair: Satoshi Ohuchida, IHI Corporation

8:00

On the Unsteady Interaction Between the Leakage and the Main Passage Flow in a High Pressure Turbine Rig: CFD URANS Investigations and Comparison With the Rig Test Data GT2016-56041 Giulio Zamboni, Paolo Adami, Rolls-Royce plc,

Derby, United Kingdom

Implementation and Validation of the Har-monic Balance Method for Temporally Peri-odic NonLinear Flows GT2016-56254 Hrvoje Jasak, Gregor Cvijetic, University of Za-

greb, Zagreb, Croatia (Hrvatska)

On the Influence of a Hubside Exducer Cavity and Bleed Air in a Close-Coupled Centrifugal Compressor Stage GT2016-58082 Peter Kaluza, University of Aachen, Aachen,

Germany, Christian Landgraf, Insitute of Jet Propulsion, RWTH Aachen, Aachen, Germany, Philipp Schwarz, RWTH - Aachen, Aachen, Ger-many, Peter Franz Jeschke, RWTH Aachen Uni-versity, Aachen, Germany, Caitlin Smythe, GE Aviation, Lynn, MA, United States

8:30

Unsteady Flow Physics and Perfor-mance Prediction of a MA-1-1/2 Stage Unshrouded High Work Turbine Using the Lattice Boltzmann Approach GT2016-56364 Ignacio Gonzalez-Martino, EuroXA - Exa Cor-

poration, Paris, France, Sebastien Gautier, Exa GmbH, Munich, Germany

On the Extension of a Harmonic Balance Method for the Simulation of Compressor Casing Treatments GT2016-56990 Christian Voigt, German Aerospace Center (DLR),

Cologne, Germany, Graham Ashcroft, DLR, Co-logne, Germany

Effects of Impeller Squealer Tip on Centrif-ugal Compressor Performance GT2016-56003 Riccardo Da Soghe, Cosimo Bianchini, Ergon Re-

search, Firenze, Italy, Lorenzo Toni, GE Oil&Gas, Florence, Italy, Dante Tommaso Rubino, GE Oil & Gas, Firenze, Italy

9:00

CFD Analysis of the Unsteady Flow in a Two-Stage Axial Turbine GT2016-56560 Yang Pan, Xi’an JiaoTong university, Xi’an,

Shaanxi, China, Qi YUAN, Institute of Tur-bomachinery, Xi’an Jiaotong University, Xi’an, Shaanxi, China, Qian Chen, Xi’an JiaoTong university, Xi’an, Shaanxi, China, Qing Ge, daiwei ji, Shanghai Electric Power Generation Equipment Co., Ltd. Shanghai Turbine Plant, Shanghai, China

Filtering Mixing Planes for Low Reduced Frequency Analysis of Turbomachines GT2016-57380 Graham Pullan, John J Adamczyk, University of

Cambridge, Cambridge, United Kingdom

The Role of Impeller Outflow Conditions on the Performance of Vaned Diffusers GT2016-56168 Jonathan Everitt, Massachusetts Institute of

Technology, Cambridge, MA, United States, Zol-tan Spakovszky, Mass Inst of Tech, Cambridge, MA, United States, Daniel Rusch, ABB Turbo Sys-tems Ltd, Baden, Switzerland, Jurg Schiffman, Ecole Polytechnique Federale de Lausanne, Neu-chatel, Switzerland

9:30

Impact of the Expansion Ratio on the Unsteady Aerodynamics and Perfor-mance of a HP Axial Turbine GT2016-56650 Paolo Gaetani, Giacomo Persico, Andrea Spi-

nelli, Alessandro Mora, Politecnico Di Milano, Milano, Italy

Development of a Comprehensive Model for Plasma Actuation in 3D-RANS-Simula-tions GT2016-56379 Roland Matzgeller, MTU Aero Engines AG, 80995

Muenchen, Germany, Alexander Bleh, Daniela Klaubert, Technische Universität Darmstadt, In-stitute of Gas Turbines and Aerospace Propulsion, Darmstadt, Germany

Influence of Reynolds Number on the Per-formance of Process Centrifugal Compres-sors GT2016-56853 Yan Liu, Lihua Tao, Dalian University of Tech-

nology, Dalian, China, Jian Wang, Yang Wang, Xuejun Wang, Shenyang Blower Works Group Co. Ltd, ShenYang, China, Wei Wang, Dalian Uni-versity of Technology, DaLian, China

114 | ASME 2016 TURBO EXPO

THURSDAY, JUNE 16 8:00 - 10:00 AM

WIND ENERGY

Data Analytics for Wind Energy Applications

Tutorial Session • Room 402 • ThA-46-11

Session Chair: Yu Ding, Texas A&M Uni-versity

8:00

Data Analytics For Wind Energy Appli-cations GT2016-58352 Yu Ding, Texas A&M University, College Sta-

tion, TX, United States

8:30

9:00

9:30

T

U

T

O

R

I

A

L

FINAL PROGRAM | 115

THURSDAY, JUNE 16 10:15 AM - 12:15 PM

AIRCRAFT ENGINE CERAMICS COMBUSTION, FUELS & EMISSIONS

Introduction to Aero Engine Conceptual Design and

Technological Perspectives

Ceramic Matrix Composites: Properties and Performance

Combustion Modeling: Large Eddy Simulations

Tutorial Session • Room E6 • ThB-1-4 Paper Session • Room 318A • ThB- 2-1 Paper Session • Room 317C • ThB-4-26

Session Chair: Konstantinos Kyprian-idis, Mälardalen University

Session Chair: Gregory Morscher, The Uni-versity of AkronSession Co-Chair: Sung Choi, Naval Air Sys-tems Command

Session Chair: Thomas Schmitt, EM2C lab-oratory, CNRS, Ecole Centrale Paris, Chate-nay-Malabry

10:1

5

Introduction to Aero Engine Conceptual Design and Technological Perspectives GT2016-58304 Konstantinos Kyprianidis, Mälardalen Uni-

versity, Västerås, Sweden

Electrical Resistance and Acoustic Emis-sion During Fatigue Testing of Pristine and High Velocity Impact SiC/SiC Composites at Room and Elevated Temperature GT2016-56507 Zipeng Han, University of Akron, Akron, OH,

United States, Gregory Morscher, The Universi-ty of Akron, Akron, OH, United States, Emman-uel Maillet, GE Global Research, Niskayuna, NY, United States, Manigandan Kannan, University of Akron, Akron, OH, United States, Sung Choi, Naval Air Systems Command, Patuxent River, MD, United States, Frank Abdi, Alpha Star Corp, Long Beach, CA, United States

A LES-LEM Study of Preferential Diffusion Processes in a Partially Premixed Swirling Combustor With Synthesis Gases GT2016-57146 Shaoshuai Li, Yunzhe Zheng, Tsinghua Uni-

versity, Beijing, China, Daniel Mira Martinez, BSC-CNS, Barcelona, Cataluna, Spain, Suhui Li, Tsinghua University, Beijing, China, Min Zhu, Tsinghua U., Beijing, China, Xi Jiang, Lancaster University, Lancaster, United Kingdom

10:4

5

The Application of Ceramic Matrix Com-posite to Low Pressure Turbine Blade GT2016-56614 Fumiaki WATANABE, Takeshi Nakamura, Ken-

ichi Shinohara, IHI Corporation, Tokyo, Japan

Large Eddy Simulation of a Realistic Gas Turbine Combustor GT2016-57512 Baopeng Xu, Ya Liu, Rong Xie, Dalian University

of Technology, Dalian, Liaoning, China

11:15

Development And Test of Oxide/Oxide CMC Combustor Liner Demonstrators for Aero Engines GT2016-57323 Thomas Behrendt, DLR, Koeln, Germany, Stefan

Hackemann, Peter Mechnich, DLR German Aero-space Center, Koeln, Germany, Yuan Shi, San-drine Hoenig, Severin Hofmann, DLR German Aerospace Center, Stuttgart, Germany, Dietmar Koch, German Aero.Center, Inst. of Str. and De-sign, Stuttgart, Germany

11:4

5

Foreign Object Damage in an Oxide/Oxide Ceramic Matrix Composite (CMC) Under Prescribed Tensile Loading GT2016-58058 Nesredin Kedir, David Faucett, Luis Sanchez,

NAVAIR, Patuxent River, MD, United States, Sung Choi, Naval Air Systems Command, Patuxent Riv-er, MD, United States

CFD Modeling of Equivalence Ratio Vari-ation Effects on a Pressurized Turbulent Premixed Flame GT2016-58074 Sandeep Jella, Siemens AGT, Montreal, QC, Can-

ada, Jeffrey M. Bergthorson, McGill University, Montreal, QC, Canada, Pierre gauthier, Siemens Canada Limited, Montreal, QC, Canada, Gilles Bourque, Siemens Canada Limited, Dorval, QC, Canada

T

U

T

O

R

I

A

L

116 | ASME 2016 TURBO EXPO

THURSDAY, JUNE 16 10:15 AM - 12:15 PM

COMBUSTION, FUELS & EMISSIONS

CONTROLS, DIAGNOSTICS & INSTRUMENTATION EDUCATION

Jet-in-crossflow & Swirling Flows Moving to "More Electric" Engines Education

Paper Session • Room 308B • ThB-4-30 Tutorial Session • Room E3 • ThB-5-11 Paper Session • Room 318B • ThB- 7-3

Session Chair: Antonio Andreini, Univer-sity of Florence

Session Chair: Noriko Morioka, IHI Corpo-ration, Engine Technology Dept., New Tech-nology Project Gr.

Session Chair: Dr. Cengiz Camci, Penn State University Session Co-Chair: Dr. Vassilios Pachidis, Cranfield University

10:1

5

Impact of Swirling Flow Structure on Shear Layer Vorticity Fluctuation Mechanisms GT2016-56460 Benjamin Mathews, Samuel Hansford, Penn-

sylvania State University, University Park, PA, United States, Jacqueline O’Connor, Pennsyl-vania State University, , University Park, PA, United States

Moving to "More Electric" EnginesTutorial. GT2016-58323 Noriko Morioka, IHI Corporation, Engine Tech-

nology Dept., New Technology Project Gr., Tokyo, Japan

A Laboratory Based Course on Energy Sys-tems in an Mechanical Engineering Under-graduate Program GT2016-56186 Sabri Deniz, Lucerne University of Applied Sci-

ences, HORW, Switzerland

10:4

5

Methods for the Extraction and Analy-sis of the Global Mode in Swirling Jets Undergoing Vortex Breakdown GT2016-56588 Lothar Rukes, TU Berlin, Berlin, Germany,

Moritz Sieber, Institute of Fluid Dynamics and Technical Acoustics, H.F.I, TU Berlin, Ber-lin, Berlin, Germany, Christian Oliver Pasche-reit, Chair of Fluid Dynamics, Hermann-Föt-tinger-Institut, TU Berlin, Berlin, Germany, Kilian Oberleithner, Chair of Fluid Dynamics, Institute of Fluid Dynamics and Technical Acoustics/ TU Berlin, Berlin, Germany

Experiences From Changing the Study Platform of Turbomachinery Course From Blended Education to Problem Based Learning GT2016-56200 Aki Grönman, Jari Backman, Ahti Jaatinen-Vär-

ri, Kaisa Grönman, Lappeenranta University of Technology, Lappeenranta, Lappeenranta, Fin-land

11:15

Advanced Identification of Coherent Structures in Swirl-Stabilized Combus-tors GT2016-56591 Moritz Sieber, Institute of Fluid Dynamics

and Technical Acoustics, H.F.I, TU Berlin, Ber-lin, Berlin, Germany, Christian Oliver Pasche-reit, Chair of Fluid Dynamics, Hermann-Föt-tinger-Institut, TU Berlin, Berlin, Germany, Kilian Oberleithner, Chair of Fluid Dynamics, Institute of Fluid Dynamics and Technical Acoustics/ TU Berlin, Berlin, Germany

A Simple Model for Thermodynamic Prop-erties of Air and Combustion Gases for Ed-ucational Purposes GT2016-57601 Milan Banjac, Srdjan Milic, Milan Petrovic, Uni-

versity of Belgrade, Belgrade, Serbia

11:4

5

Flow Dynamics in Single and Multi-Noz-zle Swirl Flames GT2016-57755 Travis Smith, Georgia Institute of Technol-

ogy, Atlanta, GA, United States, Benjamin Emerson, Georgia Institute of Tech, Atlanta, GA, United States, Ianko Chterev, Ben T. Zinn Combustion Laboratory, Atlanta, GA, United States, David Noble, Georgia Inst Tech, Mar-ietta, GA, United States, Tim Lieuwen, Georgia Institute of Technology, Atlanta, GA, United States

“Hydrodynamic Torque Converters for Oil and Gas Compression and Pumping Ap-plications: Basic Principles, Performance Characteristics and Applications” GT2016-56026 Klaus Brun, Southwest Research Institute, San

Antonio, TX, United States

T

U

T

O

R

I

A

L

FINAL PROGRAM | 117

THURSDAY, JUNE 16 10:15 AM - 12:15 PM

ELECTRIC POWER FANS & BLOWERS HEAT TRANSFER: NUMERICAL INTERNAL COOLING

Gas Turbine Technology Development Design Methods and Optimization Numerical Internal Cooling: Ribs,

Pin Fins, and Pedestals - II

Paper Session • Room 402 • ThB-8-8 Paper Session • Room 308C • ThB- 9-1 Paper Session • Room 301 • ThB-11-3

Session Chair: Richard Dennis, US Dept Of EnergySession Co-Chair: Robin Ames, DoE Na-tional Energy Technology Lab

Session Chair: Sybrand J. van der Spuy, Stel-lenbosch UniversitySession Co-Chair: Massimo Masi, University of Padova - DTG

Session Organizer: Changmin Son, Pusan National UniversitySession Co-Organizer: Zhirui Dong, GE Pow-er & Water

10:1

5

Flexible Combined Cycle Gas Turbine Power Plant utilising Organic Rankine Cycle technology GT2016-56116 Mike Welch, Siemens Energy Oil & Gas, Lin-

coln, United Kingdom, Nicola Rossetti, Tur-boden, Brescia, Italy

A Criterion for the Preliminary Design of High-Efficiency Tube-Axial Fans GT2016-56960 Massimo Masi, University of Padova - DTG, Vicen-

za, Italy, Stefano Castegnaro, University of Pado-va, Padova, Italy, Andrea Lazzaretto, Università di Padova - DII, Padova, Italy

Evaluation of the SST-SAS Model for Pre-diction of Separated Flow Inside Turbine Internal Cooling Passages GT2016-56117 Piotr Zacharzewski, The University of Notting-

ham, Nottingham, United Kingdom, Kathy Sim-mons, University of Nottingham, Nottingham, United Kingdom, Richard Jefferson-Loveday, The University of Nottingham, Nottingham, United Kingdom, Luigi Capone, Rolls-Royce, plc., Derby, United Kingdom

10:4

5

Development of Next Generation Gas Turbine Combined Cycle System GT2016-56322 Hiroyuki Yamazaki, Masahiro Abe, Tohoku

Electric Power Co., Inc., Sendai, Miyagi, Ja-pan, Yoshiaki Nishimura, Tohoku Electric Power Co., Inc, Sendai, Miyagi, Japan, Junichi-ro Masada, Mitsubishi Hitachi Power Sys-tems,LTD., Takasago, Hyogo, Japan, Satoshi Hada, Mitsubishi Hitachi Power Systems Co. Ltd., Takasago City, Hyogo, Japan, Kazuma-sa Takata, Mitsubishi Hitachi Power Sys-tems,LTD., Takasago, Hyogo, Japan

Aerodynamic and Acoustic Performance of a Single Stage Axial Fan With Extensive Blade Sweep Designed to Limit Noise Emis-sions GT2016-56555 Daniel Giesecke, TU Braunschweig, Braunsch-

weig, Germany, Jens Friedrichs, TU Braunsch-weig Inst of Aircraft Propulsion & Turboma-chinery, Braunschweig, Germany, Udo Stark, TU Braunschweig Institut of Fluid Mechanics, Braunschweig, NDS, Germany, Maik Dierks, AKG Thermotechnik International GmbH & Co. KG, Hofgeismar, Germany

Design for Additive Manufacturing: Inter-nal Channel Optimization GT2016-57318 Marco Pietropaoli, Imperial College of London,

London, Please choose ..., United Kingdom, Rich-ard Ahlfeld, Francesco Montomoli, Imperial College London, London, United Kingdom, Ales-sandro Ciani, General Electric, firenze, FI, Italy, Michele D’Ercole, GE Oil & Gas, Florence, Italy

11:15

Beyond Brayton Cycle: It Is Time to Change the Paradigm GT2016-57979 Seyfettin Can Gülen, Bechtel, Frederick, MD,

United States

Aeroacoustic Optimization of Radial Fans for Medical Applications GT2016-57234 Michael Stadler, Ninsight, Graz, Austria, Julien

Grilliat, Wolfgang Laufer, ebm-papst St. Georgen GmbH & Co.KG, St. Georgen, Germany, Michael Schmitz, Ebm-Papst St Georgen Gmbh & Co KG, St Georgen, Germany

Numerical Investigation of Heat Transfer in a High Aspect Ratio Double Wall Chan-nel With Pin Fin and Jet Array Impinge-ment GT2016-56642 Rui Kan, AVIC COMMERCIAL AIRCRAFT EN-

GINE CO,LTD., Shanghai, China, Shuqing Tian, AVIC COMMERCIAL AIRCRAFT ENGINE, Shang-hai, China

11:4

5

Application of Latest Gas Turbine Tech-nologies and Verification Results GT2016-56520 Yoshiaki Nishimura, Tomoyuki Sugawara,

Kazuyuki Tada, Tohoku Electric Power Co., Inc, Sendai, Miyagi, Japan, Junichiro Masa-da, Mitsubishi Hitachi Power Systems,LTD., Takasago, Hyogo, Japan, Toshishige Ai, Tat-suya Iwasaki, Mitsubishi Hitachi Power Sys-tems, LTD, Takasago, Hyogo, Japan

Fan Blade Design Methods: Cascade versus Isolated Airfoil Approach - Experimental and Numerical Comparison GT2016-56994 Stefano Castegnaro, University of Padova, Pado-

va, Italy

Numerical Investigation of Impingement Heat Transfer on Concave- and Con-vex-Dimpled Plate With Different Dimple Arrangements GT2016-56751 Feng Zhang, Xi’an Jiaotong University, Xi’an,

China, XINJUN WANG, Xian Jiaotong Universi-ty, Xian, China, Jun Li, Xi’an Jiaotong University, Xi’an, China, Rui Tan, Dongliang Wei, Dong Fang Turbine Co., Ltd, Deyang, China

118 | ASME 2016 TURBO EXPO

THURSDAY, JUNE 16 10:15 AM - 12:15 PM

HEAT TRANSFER: INTERNAL AIR SYSTEMS & SEALS (WITH

TURBOMACHINERY)

HEAT TRANSFER: EXPERIMENTAL FILM COOLING

MANUFACTURING MATERIALS & METALLURGY

Leaf and Miscellaneous Seals Hole Geometry Effects-3 Life Extension of Gas Turbine Components

Paper Session • Room 307A • ThB- 15-6 Paper Session • Room 307B • ThB- 19-3 Panel Session • Room 401 • ThB-21-7

Session Organizer: Neelesh Sarawate, GE Global ResearchSession Co-Chair: Paul Cooper, Alstom Power Limited

Session Chair: Beni Cukurel, Technion - Isra-el Institute of TechnologySession Co-Organizer: Salam Azad, Siemens

Session Chair: Sungho Chang, KEPCO,Session Co-Chair: Scott Yandt, National Re-search Council Canada

10:1

5

CFD and Thermal Analysis of Leaf Seals for Aero-Engine Application GT2016-56735 Vincenzo Fico, Michael Pekris, Rolls-Royce

plc, Derby, United Kingdom, Christopher J. Barnes, Rolls-Royce plc., Derby, United King-dom, Rakesh K. Jha, QuEST Global, Bengal-uru, India, David Gillespie, Osney Mead In-dustrial Estate/University of Oxford, Oxford, United Kingdom

Hydrodynamic Measurements Throughout a Flat Plate Multi-Row Film Cooling Array With Inclined Holes GT2016-56184 Greg Natsui, Michael T Voet, Zachary Little, Erik

Fernandez, University of Central Florida, Orlan-do, FL, United States, Jay Kapat, University of Central Florida (UCF), Orlando, FL, United States, Jason Dees, GE Global Research, Niskayuna, NY, United States

Component Life Extension Using Ad-vanced Materials Technologies GT2016-58314 Dheepa Srinivasan, GE Power, Bangalore, Kar-

nataka, India

10:4

5

Low-Leakage Shaft End Seals for Util-ity-Scale Supercritical CO2 Turboex-panders GT2016-56979 Rahul A. Bidkar, General Electric Global Research,

Niskayuna, NY, United States, Edip Sevincer, GE Global Research Center, Niskayuna, NY, Unit-ed States, Jifeng Wang, General Electric Global Research, Niskayuna, NY, United States, Azam Thatte, GE, Niskayuna, NY, United States, Andrew Mann, Maxwell Peter, General Electric Global Research, Niskayuna, NY, United States, Grant Musgrove, Tim Allison, Jeff Moore, Southwest Research Institute, San Antonio, TX, United States

Adiabatic Film Cooling Effectiveness Mea-surements Throughout Multi-Row Film Cooling Arrays GT2016-56183 Greg Natsui, Zachary Little, University of Central

Florida, Orlando, FL, United States, Jay Kapat, University of Central Florida (UCF), Orlando, FL, United States, Anthony Socotch, General Electric, West Chester, OH, United States, Anquan Wang, GE Aviation, Cincinnati, OH, United States, Jason Dees, GE Global Research, Niskayuna, NY, United States

Rotor Life Extension of Land Based Gas Turbines GT2016-58315 Maxine Watson, Quest Integrity Group, LL.C,

Lower Hutt, New Zealand

11:15

Analytical Modeling and Experimental Validation of Heating at the Leaf Seal/Rotor Interface GT2016-57577 Michael Pekris, Gervas Franceschini, Rolls-

Royce Plc, Derby, United Kingdom, Andrew K. Owen, Oxford University, Oxford, Oxford-shire, United Kingdom, Terry Jones, Universi-ty of Oxford, Oxford, United Kingdom, David Gillespie, Osney Mead Industrial Estate/Uni-versity of Oxford, Oxford, United Kingdom

Accuracy of Superposition Predictions of Film Cooling Effectiveness on a Flat Plate With Double Rows of Holes GT2016-56865 Tong Meng, Northwestern Polytechnical Univer-

sity, Xi’an Shaanxi, China, Hui-ren Zhu, Cunliang Liu, Northwestern Polytechnical University, Xi’an, China, Qiang Yu, Northwestern Polytech-nical University, Xi’an Shaanxi, China, Jiansheng Wei, Northwestern Polytechnical University, Xi’an, China

Qualification Of Crack Growth Models for the Life Extension of Rotors GT2016-58316 Avisekh Banerjee, Life Prediction Technologies

Inc., Ottawa, ON, Canada

11:4

5

Experimental Characterization of Rotor Convective Heat Transfer Coefficients in the Vicinity of a Leaf Seal GT2016-57603 Juan-Diego P Garcia, University of Oxford,

OXFORD, United Kingdom, Michael Pekris, Rolls-Royce Plc, Derby, United Kingdom, Leonid Ganin, University of Oxford, Oxford, United Kingdom, Gervas Franceschini, Rolls-Royce plc, Derby, United Kingdom, David Gillespie, Osney Mead Industrial Estate/Uni-versity of Oxford, Oxford, United Kingdom

An Experimental Investigation of Full-Cov-erage Film Cooling Effectiveness and Heat Transfer Coefficient of a Turbine Guide Vane in a Linear Transonic Cascade GT2016-56839 Zhong-yi Fu, Hui-ren Zhu, Cunliang Liu, Cong

Liu, Zheng Li, Northwestern Polytechnical Uni-versity, Xi’an, Shanxi, China

Use of Advanced Coatings for the Life Ex-tension of Gas Path Components GT2016-58317 Purusottam Sahoo, ASM, LLC, Houston, TX, Unit-

ed States

FINAL PROGRAM | 119

THURSDAY, JUNE 16 10:15 AM - 12:15 PM

OIL & GAS APPLICATIONS STEAM TURBINES STRUCTURES & DYNAMICS: BEARING & SEAL DYNAMICS

Wet Gas Compression Steam Flow Modeling Squeeze Film Dampers & Bearings

Tutorial Session • Room E5 • ThB-24-18 Paper Session • Room E2 • ThB-26-9 Paper Session • Room 300 • ThB- 31-7

Session Chair: Grant Musgrove, South-west Research Institute

Session Chair: Sean Jenkins, GE Global Re-searchSession Co-Chair: Joerg Starzmann, Cam-bridge University Engineering Department

Session Chair: Jason Wilkes, Southwest Re-search InstituteSession Co-Chair: Ilmar Ferreira Santos, Technical University of Denmark

10:1

5

Influence of Turbulence Modelling to Con-densing Steam Flow in the 3D Low-Pressure Steam Turbine Stage GT2016-57590 Yogini Patel, Giteshkumar Patel, Teemu

Turunen-Saaresti, Lappeenranta University of Technology, Lappeenranta, Finland

Transient Response of a Short-Length (L/D=0.2) Open-Ends Elastically Supported Squeeze Film Damper: Centered and Large-ly Off-Centered Whirl Motions GT2016-56492 Luis San Andres, Sean Den, Texas A & M Univ,

College Station, TX, United States, Sung-Hwa Jeung, Texas A&M University, College Station, TX, United States

10:4

5

Numerical Investigation of Boundary Lay-ers in Wet Steam Nozzles GT2016-57598 Joerg Starzmann, Fiona R. Hughes, Alexander

J. White, Cambridge University Engineering De-partment, Cambridge, United Kingdom, Marius Gruebel, ITSM University of Stuttgart, Stuttgart, Germany, Damian Vogt, University of Stuttgart, Stuttgart, Germany

Response of a Squeeze Film Damper-Elas-tic Structure System to Multiple and Con-secutive Impact Loads GT2016-56695 Luis San Andres, Texas A & M Univ, College Sta-

tion, TX, United States, Sung-Hwa Jeung, Texas A&M University, College Station, TX, United States

11:15

Oil Scoop Simulation and Analysis Using CFD and SPH GT2016-57554 Evgenia Korsukova, Arno Kruisbrink, Herve

Morvan, University of Nottingham, Nottingham, United Kingdom, Paloma Paleo Cageao, Gas Tur-bine Transmissions Research Centre, Notting-ham, United Kingdom, Kathy Simmons, Universi-ty of Nottingham, Nottingham, United Kingdom

11:4

5

Non-Realizability Problem With Quadra-ture Method of Moments in Wet-Steam Flows and Solution Techniques GT2016-57796 Ali Afzalifar, School of Energy Systems, Lappeen-

ranta University of Technology, Lappeenranta, Finland, Teemu Turunen-Saaresti, Aki Grönman, Lappeenranta University of Technology, Lap-peenranta, Finland

Oil-Air Flow Between the Cage and Inner Race of an Aeroengine Bearing GT2016-56927 Akinola A. Adeniyi, University of Central Lan-

cashire, Preston, Lancs, United Kingdom, Herve Morvan, Kathy Simmons, University of Notting-ham, Nottingham, Notts., United Kingdom

T

U

T

O

R

I

A

L

120 | ASME 2016 TURBO EXPO

THURSDAY, JUNE 16 10:15 AM - 12:15 PM

STRUCTURES & DYNAMICS: AERODYNAMIC EXCITATION

& DAMPING

SUPERCRITICAL CO2 POWER CYCLES

TURBOMACHINERY: AXIAL FLOW FAN & COMPRESSOR

AERODYNAMICS

Turbomachine Aeroelasticity and Computational Methods 3

Heat Exchangers for Supercritical CO2 Power Cycles Stall

Paper Session • Room 307C • ThB- 34-3 Tutorial Session • Room 317B • ThB-36-8 Paper Session • Room 318C • ThB-37-10

Session Chair: Heinrich Stueer, Siemens Power GenerationSession Co-Chair: Sunil Patil, ANSYS IncStefan Schmitt, Siemens AG

Session Chair: Grant Musgrove, Southwest Research Institute

Session Chair: Anna M. Young, University of Cambridge

10:1

5

Evaluation of Tortion Axis Positon on Turbine Blade Flutter by Direct Mea-surement Experiment - Rig Design and Numerical Simulation - GT2016-57108 Naoki Tani, IHI corporation, Nishitama-gun,

Tokyo, Japan, Mizuho Aotsuka, IHI Corpora-tion, Tokyo, Japan, Junichi Kazawa, Japan Aerospace Exploration Agency, Tokyo, Japan

Tutorial: Heat Exchangers for Supercritical CO2 Power Cycles GT2016-56161 Grant Musgrove, Southwest Research Institute,

San Antonio, TX, United States, Shaun Sulli-van, Brayton Energy LLC, Hampton, NH, United States, Dereje Shiferaw, Heatric, Poole, Dorset, United Kingdom

Modeling for Tip Clearance Effects on Stall-Onset Condition in Transonic Axial Compressors GT2016-57081 Shubo Ye, Xi’an Jiaotong University, Xi’an,

Shaanxi, China, Qingjun Zhao, Xiaorong Xiang, Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing, China, Guang Xi, Xi’an Jiaotong University, Xi’an, Shaanxi Prov-ince, China, Jianzhong Xu, Institute of Engineer-ing Thermophysics, Chinese Academy of Scienc-es, Beijing, China

10:4

5

A Low Speed Compressor Test Rig for Flutter Investigations GT2016-57960 Leonie Malzacher, TU Berlin, Berlin, Germany,

Dieter Peitsch, Technische Universität Berlin, Berlin, Berlin, Germany, Holger Hennings, DLR - German Aerospace Center, Goettingen, Germany, Silvio Geist, Technische Universität Berlin, Berlin, Berlin, Germany

Delayed Detached Eddy Simulation of Ro-tating Stall for a Full Annulus Transonic Axial Compressor Stage GT2016-57985 Jiaye Gan, University of Miami, Coral Gables,

FL, United States, Hong-Sik Im, Honeywell, Tor-rance, CA, United States, Gecheng Zha, Universi-ty of Miami, Coral Gables, FL, United States

11:15

Aerodynamic Damping Predictions for Oscillating Airfoils in Cascades Using Moving Meshes GT2016-57017 Ron-Ho Ni, Michael Ni, William Humber, Vin-

cent Capece, John Clark, Michael Ooten

Visualizations of Flow Structures in the Rotor Passage of an Axial Compressor at the Onset of Stall GT2016-57054 Huang Chen, Yuanchao Li, Johns Hopkins Uni-

versity, Baltimore, MD, United States, David Tan, Johns Hopkins University, Columbia, MD, United States, Joseph Katz, Johns Hopkins University, Baltimore, MD, United States

11:4

5

PU-Accelerated Compressible Rans Solver for Fluid-Structure Interaction Simulations in Turbomachinery GT2016-57783 Andrea Gadda, Polimi, Milano, Italy, Luca

Mangani, HSLU, HORW, Switzerland, Mag-nus Fischer, ABB Turbo Systems Ltd, Baden, Switzerland, Ernesto Casartelli, Hochschule Luzern Technik & Architektu, Horw, Switzer-land, Giulio Romanelli, HSLU, Horw, Switzer-land, Paolo Mantegazza, Polimi, Milano, Italy

Linear to Nonlinear Transition During the Spike Stall Process in a Low Speed Axial Flow Compressor Rotor GT2016-56752 Yuping QIAN, Yuzhi JIN, Weilin ZHUGE, Tsing-

hua University, Beijing, China, Yajun LU, Beihang University, Beijing, China, Yangjun ZHANG, Ts-inghua University, Beijing, China

T

U

T

O

R

I

A

L

FINAL PROGRAM | 121

THURSDAY, JUNE 16 10:15 AM - 12:15 PM

TURBOMACHINERY: AXIAL FLOW TURBINE

AERODYNAMICS

TURBOMACHINERY: DESIGN METHODS & CFD MODELING FOR

TURBOMACHINERY

TURBOMACHINERY: RADIAL TURBOMACHINERY

AERODYNAMICS

Specific studies in turbine aerodynamics I Fan and Compressor Applications Radial Compressors - Industrial

Applications

Paper Session • Room 327 • ThB-38-15 Paper Session • Room E1 • ThB-39-8 Paper Session • Room E4 • ThB- 42-7

Session Chair: Ardeshir Riahi, HoneywellSession Co-Chair: Khosro Molla Hossei-ni, Honeywell

Session Chair: Mahmoud Mansour, Honey-well AerospaceSession Co-Chair: Sanjay Hingorani, Para-metric Solutions Inc.

Session Chair: Michele Marconcini, Univer-sity of FlorenceSession Co-Chair: Asad Asghar, Royal Mili-tary College Of Canada

10:1

5

Flat-Plate Boundary Layers in Acceler-ated Flow GT2016-56044 Pascal Bader, Graz University of Technology,

Graz, Austria, Manuel Pschernig, Institute for thermal Turbomachinery and Machine dynamics, Graz University of Technology, Graz, Austria, Wolfgang Sanz, Jakob Woiset-schlaeger, Franz Heitmeir, Graz University of Technology, Graz, Austria, Walter Meile, Guenter Brenn, Institute of Fluid Mechanics and Heat Transfer, Graz University of Tech-nology, Graz, Austria

Optimization of a Two-Stage Transonic Ax-ial Fan to Enhance Aerodynamic Stability GT2016-56261 Sang-Bum Ma, Arshad Afzal, Inha University,

Incheon, Korea (Republic), Kwang-yong Kim, Inha Univ, Incheon 402-751, Incheon, Korea (Re-public), Jaeho Choi, Hanwha Techwin Co., Ltd., Seongnam-Si, Gyeonggi-Do, Korea (Republic), Wonsuk Lee, Hanwha Techwin Co., Seongnam-si, Korea (Republic)

Numerical Investigation of the Flow Dis-tortion Impact on a Refrigeration Centrif-ugal Compressor GT2016-57063 Feng Shen, United Technologies Research Cen-

ter [China] Ltd., Shanghai, Shanghai, China, Lei Yu, United Technologies Research Center (Chi-na), Shanghai, China, William Cousins, United Technologies Research Center, Glastonbury, CT, United States, Vishnu Sishtla, UTC Climate Con-trols & Security, Manlius, NY, United States, Om Sharma, United Technologies Research Center, East Hartford, CT, United States

10:4

5

Research on the Matching Relationship Between HPT and LPT of One and One-Half Vaneless Contra-Rotating Turbines GT2016-56141 Xiao Xu, Qingjun Zhao, Weiwei Luo, Fei

Tang, Xiaolei Sun, Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing, China

Assessment of Body Force Methodologies for the Analysis of Intake-Fan Aerodynam-ic Interactions GT2016-57014 William Thollet, Airbus, Toulouse, France, Guil-

laume Dufour, ISAE-Supaero, Toulouse, France, Florian Blanc, AIRBUS Operation SAS, Toulouse, France, Xavier Carbonneau, ISAE, Toulouse, France

Numerical and Experimental Investiga-tion of Return Channel Vane Aerodynam-ics With 2D and 3D Vanes GT2016-57713 Andre Hildebrandt, Frederik Schilling, Man Die-

sel & Turbo SE, Oberhausen, Germany

11:15

Accounting for Uncontrolled Variations in Low-Speed Turbine Experiments GT2016-56667 Kathryn Evans, University of Cambridge,

Whittle Laboratory, Cambridge, United King-dom, John Longley, Cambridge University, Cambridge, OTHER, United Kingdom

Body Force Modeling of the Aerodynamics of the Fan of a Turbofan at Windmill GT2016-57462 Guillaume Dufour, ISAE-Supaero, Toulouse,

France, William Thollet, Airbus, Toulouse, France

Design Exploration of a Return Channel for Multistage Centrifugal Compressors GT2016-57777 Vishal Jariwala, Louis Larosiliere, James Har-

din, Elliott Group, Jeannette, PA, United States

11:4

5

Clocking in Low-Pressure Turbines GT2016-56668 Kathryn Evans, University of Cambridge,

Whittle Laboratory, Cambridge, United King-dom, John Longley, Cambridge University, Cambridge, OTHER, United Kingdom

An Introduction of Aerodynamic Shape Op-timization Platform for Compressor Blade GT2016-56861 Duan Yanhui, China Aerodynamics Research and

Development Center, Mianyang, Sichuan, China, Wu Wenhua, Fan Zhaolin, Chen Ti, China Aero-dynamics Research and Development Center, Mian Yang, China

Design of a Centrifugal Turbo Compressor With the Working Fluid Water for the Op-eration in a Hybrid Sorption/Compression Heat Pump Cycle GT2016-58177 Thomas Eckert, Leo Dostal, University of Ap-

plied Sciences Munich, Munich, Germany, Martin Helm, University of Applied Sciences, Munich, Germany, Christian Schweigler, University of Applied Sciences Munich, Munich, Bavaria, Ger-many

122 | ASME 2016 TURBO EXPO

THURSDAY, JUNE 16 10:15 AM - 12:15 PMTURBOMACHINERY:

MULTIDISCIPLINARY DESIGN APPROACHES,

OPTIMIZATION & UNCERTAINTY QUANTIFICATION

WIND ENERGY CYCLE INNOVATIONS

Preliminary MDO and Parameterization Approaches Wind Turbine Simulations Introduction to Dynamic Analysis

and Modelling of Plant Systems

Paper Session • Room 403 • ThB-45-7 Paper Session • Room 308A • ThB-46-1 Tutorial Session • Room 317A • ThB-6-10

Session Chair: Marcus Meyer, Rolls-Royce Deutschland

Session Chair: Alexandrina Untaroiu, Vir-ginia TechSession Co-Chair: Xiaodong Wang, North China Electric Power University

Session Chair: Alberto Traverso, Univ Of GenovaSession Co-Chair: Seyfettin Can Gülen, Bechtel, Kihyung Kim, GE Power and Water, Alessandro Ramaglia, Ansaldo Energia

10:1

5

Two-Dimensional Airfoil Shape Opti-mization using Highly Differentiable Splines and Evolution Strategies GT2016-56040 Jose M. Chaquet, Industria de Turbopro-

pulsores S.A., Alcobendas (Madrid), Madrid, Spain, David Cadrecha, ITP, Alcobendas, Spain, Roque Corral, ITP, Alcobendas (Ma-drid), Spain, Guillermo Pastor, Industria de Turbopropulsores S.A., Alcobendas (Madrid), Madrid, Spain

Coupling of an Unsteady Lifting Line Free Vortex Wake Code to the Aeroelastic HAWT Simulation Suite FAST GT2016-56290 Joseph Saverin, Technische Universitat Berlin,

Berlin, Germany, David Marten, TU Berlin - ISTA, Berlin, Berlin, Germany, George Pechlivanoglou, HFI TU Berlin, Berlin, Germany, Christian Navid Nayeri, H.F.I. TU Berlin, Berlin, Berlin, Germany, Christian Oliver Paschereit, Chair of Fluid Dy-namics, Hermann-Föttinger-Institut, TU Berlin, Berlin, Germany

10:4

5

New Correlations for High-Pressure Turbine Housing and Shroud Segments GT2016-56686 Christian Savaria, École De Technologie

Supérieure, Montreal, QC, Canada, Francois Garnier, Ecole De Technologie Supérieure, Montréal, QC, Canada, Patricia Phutthavong, Pratt & Whitney Canada, Montreal, QC, Can-ada, Hany Moustapha, Ecole Technologie Su-perieure, Montreal, QC, Canada

An Unsteady Aerodynamics Model for Lift-ing Line Free Vortex Wake Simulations of HAWT and VAWT in QBlade GT2016-57184 Juliane Wendler, HFI / TU Berlin, Berlin, Germa-

ny, David Marten, TU Berlin - ISTA, Berlin, Ber-lin, Germany, George Pechlivanoglou, HFI TU Berlin, Berlin, Germany, Christian Navid Nayeri, H.F.I. TU Berlin, Berlin, Berlin, Germany, Chris-tian Oliver Paschereit, Chair of Fluid Dynamics, Hermann-Föttinger-Institut, TU Berlin, Berlin, Germany

11:15

Automated Thermal and Stress Prelimi-nary Analyses Applied to a Turbine Ro-tor GT2016-58043 Maxime Moret, Ecole de Technologie Su-

perieure, Verdun, QC, Canada, Alexandre De-lecourt, Siemens Canada, Dorval, QC, Canada, Acher Igal Abenhaim, Pratt & Whitney Cana-da, Montreal, QC, Canada, Francois Garnier, Ecole De Technologie Supérieure, Montréal, QC, Canada, Hany Moustapha, Ecole Technol-ogie Superieure, Montreal, QC, Canada

Effect of Turbulence and Transition Models on the CFD-Based Performance Prediction of Wind Turbines GT2016-56728 Benedikt Ernst, Leibniz Univ Hannover, Han-

nover, Germany, Joerg Seume, Gottfried Wilhelm Leibniz Universitaet, Hannover, Germany, Flori-an Herbst, Gottfried Wilhelm Leibniz Universitaet Hannover, Hannover, Niedersachsen, Germany

11:4

5

Preliminary and Robust Design Analysis of a Solar Thermal Power Block GT2016-57172 Rodney Persky, Emilie Sauret, Queensland

University of Technology, Brisbane, Queensland, Australia

Spectra and Large Eddy Structures in the Double Log-Layer of a High Re Wind Tur-bine Array Boundary Layer GT2016-56359 Tanmoy Chatterjee, Yulia Peet, Arizona State

University, Tempe, AZ, United States

T

U

T

O

R

I

A

L

FINAL PROGRAM | 123

THURSDAY, JUNE 16 2:30 - 5:30 PM

AIRCRAFT ENGINE CERAMICS COAL, BIOMASS & ALTERNATIVE FUELS

Numerical and Experimental Investigations of Aero-engine

Oil System Components

Ceramic Matrix Composites for Hot Section Parts

Technologies And Facilities For Small To Micro Scale Chp From

Biomass And Alternatives Fuels

Paper Session • Room E4 • ThC-1-5 Tutorial Session • Room 308B • ThC- 2-3 Panel Session • Room 401 • ThC- 3-8

Session Chair: Jason H. Chet-wynd-Chatwin, Rolls-Royce plc.Session Co-Chair: Guillermo Paniagua, Brian Nicholson

Session Chair: Gregory Morscher, The Uni-versity of AkronSession Co-Chair: Severin Hofmann, DLR German Aerospace Center

Session Chair: Subith Vasu, University of Central FloridaSession Co-Chair: Simone Colantoni, GE Oil & Gas, Devidasa Pai Gorte, GE Oil & Gas

2:30

Innovative Shallow Sump Customiza-tions for Aero-Engine Bearing Chambers GT2016-56107 Budi Chandra, University of the West of En-

gland, Bristol, United Kingdom, Kathy Sim-mons, University of Nottingham, Nottingham, United Kingdom

Combustion Tests on GT's Burners with Syngas Fuels @ Sesta Lab GT2016-58256 Guido Galgani, Sesta Lab, Radicondoli, SIENA,

Italy, Giulio Grassi, Sesta Lab, Siena, Italy, Chris-tian Romano, GE Oil&Gas, Firenze, Italy

3:00

Analytical and Numerical Solution of Reynold's Equation for Squeeze Film Dampers Executing Circular-Centered Orbits GT2016-56001 Sina Hamzehlouia, Kamran Behdinan, Uni-

versity of Toronto, Toronto, ON, Canada

Potential and Challenges for Super-critical CO2 Brayton Cycle as a CHP Solution for Alternative Fuels GT2016-58312 Jay Kapat, University of Central Florida (UCF),

Orlando, FL, United States

3:30

Experimental and Numerical Investiga-tions on Oil Leakage Across Labyrinth Seals in Aero Engine Bearing Chambers GT2016-56297 Felix C. von Plehwe, Matthias B. Krug, Corina

Hoefler, Hans-Jorg Bauer

Gas Turbine based concepts for small scale biomass and waste energy conversion with multiple CHP options GT2016-58319 Francesco Fantozzi, University of Perugia, Dip.

Ingegneria Industriale, Perugia, Italy

4:00

Experimental Study on Two-Phase Flows in Scavenge Pump for Aircraft En-gine Oil System GT2016-56062 Laurent Ippoliti, Université Libre de Bruxelles,

Brussels, Belgium, Olivier Berten, Universite de Libre de Bruxelles, Brussels, Belgium, Pat-rick Hendrick, Université Libre de Bruxelles, Bruxelles, Belgium

Overview of current S-CO2 power cycle technology development status GT2016-58334 Jeong-Ik Lee, Korea Advanced Institute of Sci-

ence and Technology (KAIST), Daejeon, Korea (Republic)

4:30

Limitations of a State-of-the-Art Nu-merical Modelling Framework for Two-Phase Flow in Aero-Engine Air/Oil Sep-arators GT2016-56633 Thiago Piazera de Carvalho, Herve Morvan,

David Hargreaves, Laura Cordes, Corina Hoefler

GE O&G Waste Energy Recovery Technolo-gies Landscape GT2016-58254 Paolo Del Turco, GE Oil & Gas, Impruneta, Firen-

ze, Italy

5:00

The Numerical Simulation of Multi-Scale Oil Films Using Coupled VOF and Eulerian Thin-Film Models GT2016-56747 Bruce Kakimpa, Herve Morvan, Stephen Hib-

berd, University of Nottingham, Nottingham, Nottinghamshire, United Kingdom

T

U

T

O

R

I

A

L

124 | ASME 2016 TURBO EXPO

THURSDAY, JUNE 16 2:30 - 5:30 PM

COMBUSTION, FUELS & EMISSIONS

COMBUSTION, FUELS & EMISSIONS ELECTRIC POWER

Combustion Dynamics: Dynamical Systems Approaches High Hydrogen Combustion Adapting to a Changing Market -

Current Experiences

Paper Session • Room 317C • ThC-4-24 Paper Session • Room E3 • ThC-4-27 Paper Session • Room 318B • ThC-8-6

Session Chair: Lipika Kabiraj, Chair of Fluid Dynamics, ISTA, TU BerlinSession Co-Chair: Hiroshi Gotoda, Tokyo University of Science

Session Chair: Jacqueline O’Connor, Penn-sylvania State UniversitySession Co-Chair: Fei Han, GE GRC

Session Chair: Leonardo Torbidoni, Ansal-do EnergiaSession Co-Chair: Ali Baghchehsara, Hoch-schule Bremen

2:30

Noise-Induced Dynamics in the Sub-threshold Region in Thermoacoustic Systems GT2016-57442 Aditya Saurabh, Lipika Kabiraj, Richard

Steinert, Christian Oliver Paschereit

NOx Correlation for an Industrial 10 MW Non-Premixed Gas Turbine Combustor for High Hydrogen Fuels GT2016-56189 Daniel Kroniger, RWTH Aachen University, Aachen,

Germany, Manfred Wirsum, Rwth-Aachen Univer-sity, Aachen, Germany, Atsushi Horikawa, Kunio Okada, Kawasaki Heavy Industries.Ltd GTBC, Akashi shi, Japan, Masahide Kazari, Kawasaki Heavy Industries, Ltd., Akashi, Japan

Impact of Enhanced GT Air Filtration on Power Output and Compressor Efficiency Degradation GT2016-56292 Ulf Schirmeister, Frederick T. Mohr, General

Electric (Switzerland) GmbH, Baden, Switzerland

3:00

Investigation of Ducted Inverse Non-premixed Flame Using Dynamic Sys-tems Approach GT2016-58179 Uddalok Sen, Tryambak Gangopadhyay,

Chandrachur Bhattacharya, Arpan Misra, Suman Karmakar, Preetam Sengupta, Ach-intya Mukhopadhyay, Swarnendu Sen, Ja-davpur University, Kolkata, West Bengal, India

Hydrogen Enriched Combustion Testing of Siemens SGT-400 at High Pressure Condi-tions GT2016-57470 Kam-Kei Lam, Siemens Industrial Turbomachin-

ery Ltd, Lincoln, United Kingdom, nishant parsa-nia, Siemens Industrial Turbomachinery, Lincoln, United Kingdom

MHPS F Class Gas Turbine Upgrade Verifi-cation Results GT2016-57260 Keita Fujii, Mitsubishi Hitachi Power Systems,

Ltd., Takasago-shi, Japan, Naoki Sakagami, Osamu Ueda, MITSUBISHI HITACHI POWER SYSTEMS, Hyogo, Japan

3:30

A Mutual Nearest Neighbours Based Cha-otic Synchronization Index to Detect Ther-mo-Acoustic Coupling in Gas Turbine Com-bustion Instabilities GT2016-56222 Stefano Chiocchini, Roberto Camussi, Eugen-

io Giacomazzi, Tiziano Pagliaroli, Roma TRE University, Engineering Department

Emissions of a Wet Premixed Flame of Nat-ural Gas and a Mixture With Hydrogen at High Pressure GT2016-57745 Panagiotis Stathopoulos, Phoebe Kuhn, Steffen

Terhaar, Juliane Wendler, Tom Tanneberger, Christian Oliver Paschereit, Christoph Schmal-hofer, Peter Griebel, Manfred Aigner

GT13E2 Low Part Load Operation: Extend-ed Flexibility Down to 30% Load GT2016-57317 Fulvio Magni, Sebastiano Sorato, Frank Grimm,

Marco Micheli, GE Power, Baden, OTHER, Swit-zerland

4:00

Linear Growth Rate Estimation From Dynamics and Statistics of Acoustic Sig-nal Envelope in Turbulent Combustors GT2016-58169 Nicolas Noiray, ETH Zurich, Zurich, Switzer-

land

Large Eddy Simulation of a Multiple-Injec-tion Dry Low NOx Combustor for Hydro-gen-Rich Syngas Fuel at High Pressure GT2016-58119 Keita Yunoki, Tomoya Murota, Tomohiro Asai,

Teruyuki Okazaki, Mitsubishi Hitachi Power Sys-tems, Ltd., Ibaraki-ken, Japan

Blade Damage in PowerGen Turbine Loss-es and Blade Health Monitoring GT2016-56137 Bin Zhou, FM Global, Norwood, MA, United States

4:30

Dynamical Properties of Combustion In-stability in a Laboratory-Scale Gas-Tur-bine Model Combustor GT2016-58170 Hiroshi Gotoda, Tokyo University of Science,

Tokyo, Japan, Kenta Hayashi, Ritsumeikan University, Kusatsu, Japan, Ryosuke Tsujimo-to, Ritsumeikan University, Shiga, Japan, Sho-hei Domen, Ritsumeikan University, Kusatsu, Japan, Shigeru Tachibana, Japan Aerospace Exploration Agency, Tokyo, Japan

Comparison of Numerical Combustion Models for Hydrogen and Hydrogen-Rich Syngas Applied for Dry-Low-NOx-Micro-mix Combustion GT2016-56430 Harald Funke, Nils Beckmann, Jan Keinz, FH

Aachen University of Applied Sciences, Aachen, Germany, Sylvester Abanteriba, Royal Mel-bourne Institute of Technology, Melbourne, Vic-toria, Australia

ISO 19859: Gas Turbine Applications - Re-quirements for Power Generation and How Standards Can Reduce Procurement Cost GT2016-57422 John H Macdonald, RWE Generation UK, Swin-

don, Wiltshire, United Kingdom

5:00

Integration of Modern F, G, H and J class in Combined Cycle applications- an EPC Con-tractor perspective GT2016-57022 Vinod Kalianpur, Samsung C&T, seoul, Korea

(Republic), Justin Zachary, samsung, Montgom-ery, OH, United States, byungsik so, Samsung C&T, seoul, Korea (Republic)

FINAL PROGRAM | 125

THURSDAY, JUNE 16 2:30 - 5:30 PM

HEAT TRANSFER: GENERAL HEAT TRANSFER

HEAT TRANSFER: EXPERIMENTAL INTERNAL

COOLING

HEAT TRANSFER: COMBUSTORS (WITH COMBUSTION, FUELS &

EMISSIONS)

Heat Transfer Enhancement Experimental Internal Cooling: Impingement Cooling I Combustor Heat Transfer

Paper Session • Room 307A • ThC-13-2 Paper Session • Room 307B • ThC- 16-1 Paper Session • Room 301 • ThC- 17-3

Session Organizer: Ralph Volino, United States Naval AcademySession Co-Organizer: Randall Mathison, Ohio State Uni/gas Turbine Lab

Session Organizer: Gregory Laskowski, GE AviationSession Co-Organizer: Jason Dees, GE Global Research

Session Chair: Anil Tolpadi, General Elec-tric, LibertySession Co-Chair: Nagaraja Rudrapatna, Honeywell

2:30

Experimental/Numerical Investiga-tion of Crossover Jet Impingement in a Rib-Roughened Trailing-Edge Cooling Channel GT2016-56139 Mohammad Taslim, Fei Xue, Northeastern

University, Boston, MA, United States

“Effect of Reynolds Number, Hole Patterns and Hole Inclination on Cooling Perfor-mance of an Impinging Jet Array: Part I Convective Heat Transfer Results and Op-timization” GT2016-56205 Weihong Li, Li Yang, Xueying Li, ing Ren, Hongde

Jiang, Phil Ligrani

Large Eddy Simulations of the Combustor Turbine Interface: Study of the Potential and Clocking Effects GT2016-56443 Charlie Koupper, Safran TURBOMECA, Bordes,

France, Laurent Gicquel, Florent Duchaine, CER-FACS, Toulouse, France, Guillaume Bonneau, Sa-fran TURBOMECA, Bordes, France

3:00

Effects of Double Wall Cooling Configu-ration and Conditions on Performance of Full Coverage Effusion Cooling GT2016-56515 Nathan Rogers, Zhong Ren, Warren Buzzard,

Brian Sweeney, Nathan Tinker, Phil Ligrani, Keith Hollingsworth, Fred Liberatore, Raj Patel, Hee-Koo Moon

Effect of Reynolds number, hole patterns, target plate thickness on cooling perfor-mance of an impinging jet array, part II: conjugate heat transfer results and optimi-zation. GT2016-56768 Weihong Li, Li Yang, Xueying Li, Jing Ren, Hong-

de Jiang

Variations of Anchoring Pattern of a Bluff-body Stabilized Laminar Premixed Flame as a Function of the Wall Temperature GT2016-56473 Sandrine Berger, Turbomeca / CERFACS, Bordes,

France, Stéphane Richard, Turbomeca, Bordes, France, Florent Duchaine, Laurent Gicquel, CER-FACS, Toulouse, France

3:30

Non-Uniform Array Impingement on a Curved Surface GT2016-56621 John Harrington, Jahed Hossain, Christian

Garrett, Wenping Wang, Jay Kapat, Steven Thorpe, Michael Maurer

Effects of Rotation on Heat Transfer Due to Jet Impingement on Cylindrical Dimpled Target Surface GT2016-57145 Prashant Singh, Virginia Tech, Blacksburg, VA,

United States, Srinath Ekkad, Virginia Tech. Uni-versity, Blacksburg, VA, United States

Hybrid RANS-LES Modeling of the Ae-ro-Thermal Field in an Annular Hot Streak Generator for the Study of Combus-tor-Turbine Interaction GT2016-56583 Antonio Andreini, Tommaso Bacci, Massimilia-

no Insinna, Lorenzo Mazzei, Simone Salvadori, University of Florence, Florence, Italy

4:00

An Investigation of Coolant Within Ser-pentine Passages of a High-Pressure Ax-ial Gas Turbine Blade GT2016-57776 Jeremy Nickol, Randall Mathison, Michael

Dunn, Jong-shang Liu, Malak Malak

Experimental Investigation on Flow Resis-tance and Heat Transfer Coefficient of In-ternal Lamilloy GT2016-56105 Wei Zhang, Hui-ren Zhu, Guangchao Li, chunyu

shang, Cunliang Liu

Study of the Wall Thermal Condition Ef-fect in a Lean-Premixed Downscaled Can Combustor Using Large-Eddy Simulation GT2016-58016 Daniel Mira Martinez, BSC-CNS, Barcelona,

Cataluna, Spain, Enric I. Mahiques, Simon Go-evert, Jim B.W. Kok, University of Twente, En-schede, Netherlands, Mariano Vazquez, Guillau-me Houzeaux, BSC-CNS, Barcelona, Spain, Lukas Panek, SIEMENS, Berlin, Germany

4:30

Detailed Experimental Characterization of Heat Transfer Coefficient Over the In-ternal Cooling Passages of an Additive Manufactured Turbine Airfoil GT2016-57787 Sin Chien Siw, Ching-Pang Lee, Jae Um, Mink-

ing Chyu

Enhanced Convective Heat Transfer due to Dynamically Forced Impingement Jet Arrays GT2016-57360 Frank Haucke, Technische Universitaet Berlin,

Institute of Aeronautics and Astronautics, Chair of Aerodynamics, Berlin, Germany, Wolfgang Nitsche, Technische Universität Berlin, Berlin, Germany, Dieter Peitsch, Technische Universitaet Berlin, Institute of Aeronautics and Astronautics, Chair of Aero Engines, Berlin, Germany

Gas Turbine Combustor Rig Development and Initial Observations at Cold and React-ing Flow Conditions GT2016-57825 David Gomez Ramirez, Sandeep Kedukodi,

Siddhartha Gadiraju, Srinath Ekkad, Hee-Koo Moon, Yong Kim, Ram Srinivasan

5:00

Experimental Validation of an Innova-tive Metallic Tile Holder System for a Ceramic Combustor Liner GT2016-57505 Riccardo Becchi, Emanuele Burberi, Bruno

Facchini, Lorenzo Tarchi, Luca Abba

Operation of Reheat Combustors With Sec-ondary Air Flow (SAF) Control Valves GT2016-57706 Xianfeng Gao, Daniel Burri, Christian Balmer,

Adrien Studerus, Ansaldo Energia Switzerland, Baden, Switzerland

126 | ASME 2016 TURBO EXPO

THURSDAY, JUNE 16 2:30 - 5:30 PM

INDUSTRIAL & COGENERATION

MANUFACTURING MATERIALS & METALLURGY

MICROTURBINES, TURBOCHARGERS & SMALL

TURBOMACHINES

Design and Evaluation Considerations of Waste Heat

Recovery Technologies

Advances in High Temperature Materials

Microturbine Development, Performance, and Novel Concepts

Tutorial Session • Room E5 • ThC-20-6 Panel Session • Room 402 • ThC-21-5 Paper Session • Room 308C • ThC-23-3

Session Chair: Clement Joly, SoftInWay,Session Co-Organizer: Abdul Nassar, SoftIn-WaySession Co-Chair: Valentine Moroz, SoftIn-Way

Session Chair: Yasuoki Tomita, Mitsubishi Hitachi Power Systems, LtdSession Co-Chair: Dheepa Srinivasan, GE Power

Session Chair: Vince McDonell, UC Irvine

2:30

Design and Evaluation Considerations of Waste Heat Recovery Technologies GT2016-57487 Leonid Moroz, Softinway Inc., Burlington, MA,

United States, Abdul Nassar, SoftInWay, Ban-galore, India, Clement Joly, SoftInWay, Burl-ington, MA, United States

Advanced Alloy Development Approaches - Case Studies and Industry Perspective GT2016-58325 Raghavendra Adharapurapu, GE india Technolo-

gy Centre Pvt. Ltd., Bangalore, India

Development of an Inside-Out Ceramic Turbine GT2016-57041 Céderick Landry, Patrick K. Dubois, Nicolas

Courtois, François Charron, Mathieu Picard, Jean-Sébastien Plante, Université de Sher-brooke, Sherbrooke, QC, Canada

3:00

Superalloys and Effects of Alloynig Ele-ments on Their Characteristics GT2016-58326 Chang-Yong Jo, Korea Institute of Materials Sci-

ence, Gyeongnam, Korea (Republic)

“A Simple Recuperated Ceramic Microtur-bine: Design Concept, Cycle Analysis, and Recuperator Component Prototype Tests” GT2016-57780 Michael Vick, U.S. Naval Research Lab, Washing-

ton, DC, United States, Steven Tuttle, Katherine Hinnant, U.S. Naval Research Laboratory, Code 6185, Washington, DC, United States, Matthew Kelly, Trent Young, U.S. Naval Research Labo-ratory, Code 5712, Washington, DC, United States

3:30

4:00

High Temperature Gas Turbine Parts Oper-ational Experience and Service GT2016-58327 Hideaki Kaneko, Mitsubishi Heavy Industries,

Ltd., Hyogo, Japan

Development and Testing of a 333 Kilowatt Industrial Gas Turbine GT2016-57828 Jeffrey Armstrong, Flexenergy Energy Systems

Inc., Portsmouth, NH, United States, Chris Bolin, Flexenergy Inc, Portsmouth, NH, United States, Mohammed Ebrahim, FlexEnergy Energy Sys-tems Inc., Portsmouth, NH, United States, Mi-chael Carney, FlexEnergy, Energy Systems Inc., Portsmouth, NH, United States

4:30

The Reliability Test of Hot Gas Path Com-ponent of Industrial Gas Turbine in KEPCO Research Institute GT2016-58330 Doo Soo Kim, KEPCO Research Institute, Daejeon,

Korea (Republic)

Design of a 400 kW Gas Turbine Prototype GT2016-56444 Ahti Jaatinen-Värri, Lappeenranta University

of Technology, Lappeenranta, Finland, Matti Malkamäki, Aurelia Turbines Oy, Lappeenranta, Finland, Janne Nerg, Lappeenranta univ. of tech., Lappeenranta, Finland, Antti Uusitalo, Lappeen-ranta University of Technology, Lappeenranta, Finland, Behnam Ghalamchi, Lappeenranta Uni-versity of Technology Department of Mechanical Engineering, Lappeenranta, OO, Finland, Nikita Uzhegov, Alexander I. Smirnov, Lappeenran-ta univ. of tech., Lappeenranta, Finland, Eerik Sikanen, Aki Grönman, Jari Backman, Lappeen-ranta University of Technology, Lappeenranta, OO, Finland5:

00

T

U

T

O

R

I

A

L

FINAL PROGRAM | 127

THURSDAY, JUNE 16 2:30 - 5:30 PM

OIL & GAS APPLICATIONS ORGANIC RANKINE CYCLE POWER SYSTEMS STEAM TURBINES

Compressor Stations ORC Power Plants: Working Fluids, Cycles and Plant Design Wet Steam Research

Paper Session • Room 317A • ThC-24-2 Paper Session • Room 317B • ThC- 25-3 Panel Session • Room E2 • ThC-26-12

Session Chair: Rainer Kurz, Solar Tur-bines IncorporatedSession Co-Chair: Tim Allison, Southwest Research Institute

Session Chair: Emiliano Casati, Delft Univer-sity of Technology

Session Chair: Joerg Starzmann, Cambridge University Engineering DepartmentSession Co-Chair: Brian Haller, GE Power

2:30

The Impact of Reciprocating Compres-sor Pulsations on the Surge Margin of Centrifugal Compressors GT2016-56025 Klaus Brun, Sarah Simons, Southwest Re-

search Institute, San Antonio, TX, United States, Rainer Kurz, Solar Turbines Incorpo-rated, San Diego, CA, United States

Investigating The Effect Of Changing The Working Fluid On The Three-Dimensional Flow Field Within Organic Rankine Cycle (ORC) Turbines GT2016-56106 Martin White, Abdulnaser Sayma, City Universi-

ty London, London, United Kingdom

Status of the International Wet Steam Modelling Project GT2016-58285 Joerg Starzmann, Cambridge University Engi-

neering Department, Cambridge, United King-dom

3:00

Acoustically Induced Vibration Mitiga-tions in Compressor Piping Systems GT2016-57800 Tim Allison, Jeffrey Bennett, Southwest Re-

search Institute, San Antonio, TX, United States

Performance Optimization and Economic Analysis of Geothermal Power Generation by Subcritical and Supercritical Organic Rankine Cycles GT2016-56821 Changwei Liu, Xi’an Jiaotong University, Xi’an,

Shaanxi, China, Tieyu Gao, Xian Jiaotong Universi-ty, Xian, Shaanxi, China, Jiangnan Zhu, Jiamin Xu, Xi’An Jiaotong University, Xi’an, Shaanxi, China

3:30

Gas Compression Optimization for Changing Pipeline Landscape GT2016-56112 Donghui Zhang, Solar Turbines Inc., San Di-

ego, CA, United States, Rainer Kurz, Solar Turbines Incorporated, San Diego, CA, United States, Matt Lubomirsky, Avneet Singh, Da-vid Garcia, Alex Troya, Solar Turbines Inc., San Diego, CA, United States

Effect of ambient conditions on ORC based power system using fin tube condensers over the year and location of installationTechnical Presentation Only. GT2016-57466 Muhammad Usman, Young-Min Yang, Korea Uni-

versity of Science & Technology (UST) & Korea In-stitute of Energy Research (KIER), Daejeon, Korea (Republic), Dong-Hyun Lee, Korea Institute of En-ergy Research, Daejeon, Korea (Republic), Byung-Sik Park, Korea Institute of Energy Research & Korea University of Science & Technology (UST), Daejeon, Korea (Republic)

Needs in wet steam research - the view of an experimentalist GT2016-58287 Markus Schatz, University of Stuttgart, Stutt-

gart, Germany

4:00

Modular Tool for Design and Off-Design Analysis of Compression Trains for Oil and Gas Applications GT2016-57771 Leopoldo Marini, Carlo Carcasci, Universi-

ty of Florence, Florence, Italy, Mirko Micio, ERGON research srl, Florence, Italy, Riccar-do Brogelli, Pier Luigi Di Pillo, GE Oil & Gas - Nuovo Pignone, Florence, Italy

4:30

Power Dip Impact on Compressor Sys-tem Stability GT2016-56950 Lars Eirik Bakken, Norwegian Univ Of Sci

& Tech, Trondheim, Norway, Erling Lunde, Morten Loes, Statoil RDI, Trondheim, Norway

Optimization of Cycle and Expander Design of an Organic Rankine Cycle Unit Using Multi-Component Working Fluids GT2016-58065 Andrea Meroni, Jesper Graa Andreasen, Leonar-

do Pierobon, Fredrik Haglind

EDF activities, targets and concerns in wet steam research GT2016-58286 Jean-Marc Dorey, R&D EDF, Chatou, France

5:00

Analysis of Historical Dry Gas Seal Fail-ure Data GT2016-57076 Meera Day, Tim Allison, Southwest Research

Institute, San Antonio, TX, United States

The University of Queensland Refrigerant and Supercritical CO2 Test Loop GT2016-58110 Braden Twomey, Hugh Russell, Andras Nagy, An-

drew Rowlands, Jason Czapla, Rajinesh Singh, Carlos André De Miranda Ventura, Ingo Jahn

128 | ASME 2016 TURBO EXPO

THURSDAY, JUNE 16 2:30 - 5:30 PM

STRUCTURES & DYNAMICS: ROTORDYNAMICS

STRUCTURES & DYNAMICS: STRUCTURAL MECHANICS,

VIBRATION & DAMPING

TURBOMACHINERY: AXIAL FLOW TURBINE

AERODYNAMICS

Bearings - Modeling & Validation 1

Turbomachine Aeroelasticity and Computational Methods 1

Secondary Flows and Endwall Profiling

Paper Session • Room 300 • ThC- 31-6 Paper Session • Room 307C • ThC-34-1 Paper Session • Room E1 • ThC-38-2

Session Chair: Martin Conlon, National Research Council CanadaSession Co-Chair: Keun Ryu, Hanyang University, Ansan

Session Chair: Paul Petrie Repar, KTH Swe-denSession Co-Chair: Mizuho Aotsuka, IHI Cor-poration

Session Chair: Inga Mahle, MTU Aero En-gines AGSession Co-Chair: Reinaldo Araujo Gomes, University of the Federal Armed Forces Mu-nich

2:30

A Water Lubricated Hybrid Thrust Bearing: Measurements and Predictions of Static Load Performance GT2016-56349 Luis San Andres, Dara Childs, Texas A & M

Univ, College Station, TX, United States, Ste-phen Phillips, Texas A&M Turbomachinery Lab, Bryan, TX, United States

Numerical Study on Aeroelastic Instability for a Low Speed Fan GT2016-56462 Kuen-Bae Lee, Imperial College London, London,

United Kingdom, Mark Wilson, Rolls-Royce, Der-by, United Kingdom, Mehdi Vahdati, Imperial Col-lege London, London, United Kingdom

Comparison of 2D and 3D Airfoils in Combination With Non Axisymmetric End Wall Contouring: Part 1 Experimental Investigations GT2016-56494 Tobias W. Zimmermann, Oliver Curkovic, Man-

fred Wirsum, Andrew Fowler, Kush Patel

3:00

Comparative Lift-Off Performance in Flexure Pivot Pad and Hybrid (Hydro-static and Hydrodynamic) Bearings With Water as the Test Fluid GT2016-56212 Dara Childs, Texas A & M Univ, College Sta-

tion, TX, United States, David Mertz, Siemens, Inc. Dresser-Rand Business, Houston, TX, United States

A Simple Model for Identifying the 'Flutter Bite' of Fan Blades GT2016-56336 Fanzhou Zhao, Imperial College London, London,

United Kingdom, Nigel H S Smith, Rolls-Royce Plc, Derby, United Kingdom, Mehdi Vahdati, Imperial College London, London, United Kingdom

Comparison of 2D and 3D Airfoils in Com-bination With Non Axisymmetric End Wall Contouring: Part 2 Numerical Investiga-tions GT2016-56914 Tobias W. Zimmermann, Oliver Curkovic, Man-

fred Wirsum, Andrew Fowler, Kush Patel

3:30

Measurements Versus Predictions for a Hybrid (Hydrostatic Plus Hydrodynam-ic) Thrust Bearing for a Range of Orifice Diameters GT2016-56213 Dara Childs, Texas A & M Univ, College Sta-

tion, TX, United States, Paul Esser, Texas A&M University, Philadelphia, PA, United States

Comparison of Two Numerical Algorithms for Computing the Effects of Mistuning of Fan Flutter GT2016-57324 Loic Salles, Imperial college, London, United King-

dom, Mehdi Vahdati, Imperial College London, London, United Kingdom

Numerical Study of Purge and Secondary flows in a Low Pressure Turbine GT2016-56789 Jiahuan Cui, Paul G. Tucker, University of Cam-

bridge, Cambridge, United Kingdom

4:00

On the Predicted Effect of Angular Misalignment on the Performance of Oil Lubricated Thrust Col-lars in Integrally Geared Compressors GT2016-57888 Travis Cable, Texas A&M University, College

Station, TX, United States, Luis San Andres, Texas A & M Univ, College Station, TX, Unit-ed States, Karl Wygant, Samsung Techwin, Pearland, TX, United States

Investigation of Inlet Distortion on the Flutter Stability of a Highly Loaded Tran-sonic Fan Rotor GT2016-56593 Senad Iseni, Chair of Thermal Turbomachinery

Ruhr-Universität Bochum, Bochum, Germany, Derek Micallef, Ruhr-Universität Bochum, Bo-chum, Germany, Ronald Mailach, Technische Universität Dresden, Dresden, Germany

End-Wall Secondary Flow Control Using Engineered Residual Surface Structure GT2016-57347 Xin Miao, Qiang Zhang, Chris Atkin, Zheng-

zhong Sun, City University London, London, United Kingdom

4:30

Transient Lift-Off Test Results for an Ex-perimental Hybrid Bearing in Air, Simu-lating a Liquid Hydrogen Turbopump Start Transient” GT2016-56310 Dara Childs, David Klooster, Henry Borchard,

Dustin Pavelek, Stephen Phillips

Statistical Sensitivity Study of Frequency Mistuning on the Prediction of the Flutter Boundary in a Transonic Fan GT2016-57295 Atsushi Tateishi, The University of Tokyo, Tokyo,

Japan, Toshinori Watanabe, Takehiro Himeno, University of Tokyo, Tokyo, Japan, Mizuho Aot-suka, Takeshi Murooka, IHI Corporation, Tokyo, Japan

Numerical Study on Aero-Thermal Performance of HP Turbine Endwalls Under Influence of Hot Streak and High Mainstream Turbulence GT2016-57591 Zhiduo Wang, Wenhao Zhang, Zhaofang Liu,

Chen Zhang, Xi’an Jiaotong University, Xi’an, Shaanxi, China, Zhenping Feng, Xi’an Jiaotong University, Shaanxi, Shaanxi, China

5:00

Rotordynamic Performance Predictions of Flexure Pivot Tilting Pad Bearings And Comparison to Published Test Data GT2016-56284 Tae Ho Kim, Kyung Eun Jang, Kookmin Uni-

versity, Seoul, Korea (Republic), Tae Gyu Choi, Doosan Heavy Industries & Construction, Changwon-si,, Korea (Republic)

On Axisymmetric Endwall Profile Optimi-zation of a High-Pressure Transonic Tur-bine Using Approximation Model GT2016-57970 Inkyom Kim, Jinuk Kim,Young Seok Kang, Jin-

soo Cho

FINAL PROGRAM | 129

THURSDAY, JUNE 16 2:30 - 5:30 PM

TURBOMACHINERY: DESIGN METHODS & CFD MODELING

FOR TURBOMACHINERY

TURBOMACHINERY: UNSTEADY FLOWS IN TURBOMACHINERY

TURBOMACHINERY: UNSTEADY FLOWS IN TURBOMACHINERY

LES and DNS Turbine Applications Stall and Surge I Unsteady Flows in Centrifugal

Compressors

Paper Session • Room 327 • ThC-39-9 Paper Session • Room 318C • ThC-44-7 Paper Session • Room 403 • ThC-44-9

Session Chair: Rob Watson, University of CambridgeSession Co-Chair: Koen HILLEWAERT, Cenaero

Session Chair: Jen-Ping Chen, The Ohio State UnivSession Co-Chair: Sameer Kulkarni, NASA Glenn Research Center

Session Chair: Michael Barton, Honeywell InternationalSession Co-Chair: Nateri K., Madavan, NASA Ames Research Center

2:30

Assessment of RANS Against LES for the Aero-Thermal Behavior of High Pressure Turbine Stages Under Realistic Inlet Conditions GT2016-56596 Stefano Vagnoli, Charlie Koupper, Guillaume

Bonneau, Tom Verstraete

Structure of Diffuser Stall and Unsteady Vortices in a Centrifugal Compressor With Vaned Diffuser GT2016-56154 Nobumichi Fujisawa, Sota Ikezu, Yutaka Ohta,

Waseda University, Tokyo, Japan

Blade Incipient Crack Determination for Centrifugal Compressor Based on Pressure Pulsation Signal Feature Extraction GT2016-56273 Hongkun Li, Changbo He, Daren Jiang, Xuejun

Wang

3:00

DNS of Low–Pressure Turbine Cascade Flows with Elevated Inflow Turbulence Using a Discontinuous–Galerkin Spec-tral–Element Method GT2016-56700 Anirban Garai, Laslo T., Diosady, Scott M.,

Murman, Nateri K., Madavan

Large-Scale DES Analysis of Stall Inception Pro-cess in a Multi-Stage Axial Flow Compressor GT2016-57104 Kazutoyo Yamada, Masato Furukawa, Yuki Ta-

mura, Seishiro Saito, Kyushu University, Fukuoka, OTHER, Japan, Akinori Matsuoka, Kawasaki Heavy Industries,Ltd., Akashi city, Japan, Kentaro Nakaya-ma, Kawasaki Heavy Industries, Ltd., Akashi, Japan

Unsteady and Multi-Blade Passage Numer-ical Simulation on an Unshrouded Centrif-ugal Impeller GT2016-56873 Tongtong Zhang, Tong Wang, Hui WANG, Ch-

uangang Gu, Shanghai Jiaotong University, Shanghai, China

3:30

LES and CDNS Investigation of T106C Low Pressure Turbine GT2016-56838 Site Hu, Chao Zhou, Zhenhua Xia, Shiyi Chen,

Peking University, Beijing, China

Numerical Study on the Effect of a Volute on Surge Phenomena in a Centrifugal Com-pressor GT2016-57542 soohwan jeon, Dongha Hwang, Jaehyeon Park,

Changhyun Kim, Je Hyun Baek, Hong-won Kim

Numerical Evaluation of the Unsteady Flow in a Centrifugal Compressor With Vaned Diffuser via URANS Approach GT2016-57538 Ali Zamiri, Byung Ju Lee, Jin Taek Chung, Korea

university, Seoul, Korea (Republic)

4:00

DNS-Based Analysis of RANS Predic-tions of a Low-Pressure Turbine Cas-cade GT2016-57582 Christoph Müller, Dr. Ralf-D. Baier, Joerg Se-

ume, Florian Herbst

Numerical Investigation of Flow Instabil-ity in Centrifugal Pump Based on Energy Gradient Method GT2016-57589 lulu zheng, Hua-Shu Dou, xiaoping chen, zuchao

zhu, baoling cui, Zhejiang Sci-Tech University, Hangzhou, China

Flow Visualization of Unsteady and Tran-sient Phenomena in a Mixed-Flow Multi-phase Pump GT2016-56581 Alberto Serena, Norwegian University of Science

and Technology, Trondheim, OO, Norway, Lars Eirik Bakken, Norwegian Univ Of Sci & Tech, Trondheim, Norway

4:30

Assessment of Grid Resolution Requirements for Accurate Simulation of Disparate Scales of Turbulent Flow in Low-Pressure Turbines GT2016-56858 Richard Pichler, University of Melbournce,

Melbourne, Victoria, Australia, Richard D. Sandberg, University of Melbourne, Mel-bourne, Victoria, Australia, Vittorio Michelas-si, General Electric Oil&Gas, Florence, Italy

Stall Warning Approach With Applica-tion to Stall Precursor-Suppressed Casing Treatment GT2016-58172 Li Fanyu, Jun Li, Air Force Engineering University,

Xi’an, China, Dong Xu, Sun Dakun, Sun Xiaofeng, Beijing University of Aeronautics and Astronau-tics, Beijing, China

Corner Separation Dynamics in a Linear Compressor Cascade GT2016-56454 Gherardo Zambonini, Ecole Centrale Lyon, Ecul-

ly, France, Xavier Ottavy, CNRS - LMFA, Ecully, France, Jochen Kriegseis, Institute of Fluid Me-chanics, Karlsruhe Institute of Technology, Karl-sruhe, Germany

5:00

Highly Resolved LES of a Linear HPT Vane Cascade Using Structured and Un-structured Codes GT2016-57189 Richard Pichler, James Kopriva, Gregory

Laskowski, Vittorio Michelassi, Richard D. Sandberg,

LES Validation for a Rotating Cylindrical Cavity With Radial Inflow GT2016-56393 Michel Onori, Dario Amirante, Nicholas J. Hills,

University of Surrey, Guildford, United Kingdom, John Chew, University of Surrey, Surrey, United Kingdom

130 | ASME 2016 TURBO EXPO

THURSDAY, JUNE 16 2:30 - 5:30 PM

TURBOMACHINERY: MULTIDISCIPLINARY DESIGN

APPROACHES, OPTIMIZATION & UNCERTAINTY

WIND ENERGY

Multi-Objective and Multi-Criteria Design

Applications (Axial and Radial Turbomachinery)

University Research Activities

Paper Session • Room 318A • ThC-45-8 Panel Session • Room E6 • ThC-46-10

Session Chair: Swati Saxena, GE Global ResearchSession Co-Chair: Byung Lee, GE Aviation

Session Chair: Lorenzo Ferrari, National Re-search Council of Italy

2:30

Multi-Objective Aerodynamic Optimisa-tion of a Radial-Inflow Turbine GT2016-58132 Mostafa Odabaee, The University of

Queensland, St Lucia, Australia, Emilie Sauret, Queensland University of Technolo-gy, Brisbane, QLD, Australia, Kamel Hooman, The University of Queensland, Brisbane, QLD, Australia

Advanced aerodynamics of Darrieus wind turbine GT2016-58246 Lorenzo Ferrari, University of Florence, Florence,

Italy

3:00

Aerothermal Optimization of Squealer Geometry in Axial Flow Turbines Using Genetic Algorithm GT2016-58154 Emre Alpman, Marmara University, Istan-

bul, Turkey, Levent Kavurmacioglu, HIDIR MARAL, Cem B Senel, Kaan Deveci, Istanbul Technical University, Istanbul, Turkey

Start Up of Vertical Axis Wind Turbines: Theory and Wind Tunnel Experiments GT2016-58247 Grant Ingram, Durham University, Durham, Unit-

ed Kingdom

3:30

Optimization of a Centrifugal Pump Im-peller by Controlling Blade Profile Pam-eters GT2016-56604 M. H. Siddique, k.r. Mrinal, Abdus Samad, iit

madras, chennai, India

ETH Zurich's aero-structural measure-ments on multi-megawatt wind turbines GT2016-58248 Ndaona Chokani, ETH Zurich, Zurich, Switzer-

land

4:00

Multicriteria Optimization of Axial Low Pressure Compressor of Gas Turbine Power Plant GT2016-57856 Grigorii Popov, Evgenii Goriachkin, Daria

Kolmakova, Yulia Novikova, Samara State Aerospace University, Samara, Russia

Design, manufacturing and operation of the first SMART wind turbine in Germany (a.k.a. BeRT) GT2016-58249 George Pechlivanoglou, HFI TU Berlin, Berlin,

Germany

4:30

Design and Optimization of Tandem Cascade Based on Parallel Differential Evolution Algorithm GT2016-56908 Hao Cheng, Bo Liu, Xiaodong Yang, Jun Li

Wind turbine performance evaluation GT2016-58250 Yu Ding, Texas A&M University, College Station,

TX, United States

5:00

“Distributed Multidisciplinary Optimi-zation of a Turbine Blade Regarding Per-formance, Reliability and Castability” GT2016-56079 Clemens Buske, Alexander Krumme, Thom-

as Schmidt, Christian Dresbach, Sascha Zur, Ruediger Tiefers

Small Wind Turbine Testing in a Wind Tun-nel Under Low Reynolds Number Condi-tions GT2016-58252 Kenneth Van Treuren, Baylor University, Waco,

TX, United States

FINAL PROGRAM | 131

FRIDAY, JUNE 17 8:00 - 10:00 AM

CERAMICS COAL, BIOMASS & ALTERNATIVE FUELS

COMBUSTION, FUELS & EMISSIONS

Ceramic Matrix Composites: Modeling and Life Prediction

Biofuels, Biomass and Coal Challenges and Applications

Pollutant Emissions Formation & Control: Combustor Performance

Paper Session • Room E2 • FA-2-2 Paper Session • Room 318B • FA-3-4 Paper Session • Room E3 • FA-4-9

Session Chair: Jun Shi, Rolls-Royce Cor-porationSession Co-Chair: Sai Sarva, GE Global Research

Session Chair: Pierre gauthier, Siemens Can-ada LimitedSession Co-Chair: Leiyong Jiang, National Research Council

Session Chair: P Gokulakrishnan, Combus-tion Science and Engineering, Inc,Session Co-Chair: Gilles Bourque, Siemens Canada Limited

8:00

Mesoscopic Modeling of 3D Four-Direc-tional Braided Composites GT2016-56280 Rongqiao Wang, Long Zhang, Dianyin Hu,

Xiuli Shen, Beihang University, Beijing, China, Jun Song, McGill University, Montreal, QC, Canada

Investigation on Jet Breakup of High-Vis-cous Fuels for Entrained Flow Gasification GT2016-56371 Thomas Müller, Karlsruhe Institute of Technology,

Engler-Bunte-Institute, Karlsruhe, Germany, Alex-ander Sänger, Tobias Jakobs, Karlsruhe Institute of Technology, Institute for Technical Chemistry, Eggenstein-Leopoldshafen, Germany, Peter Ha-bisreuther, Karlsruhe Institute of Technology, En-gler-Bunte-Institute, Karlsruhe, Germany, Thomas Kolb, Karlsruhe Institute of Technology, Institute for Technical Chemistry, Eggenstein-Leopoldshafen, Germany, Nikolaos Zarzalis, Karlsruhe Inst. of Tech., Division of Comb. Tech., Karlsruhe, Germany

Numerical and Experimental Studies of Burner Geometry Effects on Methane/Air Mixing Uniformity and Combustion Char-acteristics of a DLN Burner GT2016-58130 Yan Zhao, Yan Liu, Weiwei Shao, Xiaodi Tang,

Zhedian Zhang, Yunhan Xiao, Institute of Engi-neering Thermophysics, Chinese Academy of Sci-ences, Beijing, China

8:30

Optimizing Ceramic Matrix Compos-ite Interlaminar Fracture Toughness (Mode I) Wedge Test GT2016-58076 Frank Abdi, Alpha Star Corp, Long Beach, CA,

United States, Saber DorMohammadi, Cody Godines, Jalees Ahmad, AlphaSTAR Corpora-tion, Long Beach, CA, United States, Gregory Morscher, The University of Akron, Akron, OH, United States, Sung Choi, Naval Air Sys-tems Command, Patuxent River, MD, United States, Stephen Gonczy, Gateway Material Technology, MT Prospect, IL, United States, Rabih Mansour, The University of Akron, Univ Of Akron, OH, United States

A Numerical Study on the Reactivity of Biogas/Reformed-Gas/Air and Methane/Reformed-Gas/Air Mixtures at Gas Turbine Relevant Conditions GT2016-56655 Pablo Diaz Gomez Maqueo, Philippe Versailles,

McGill University, Montreal, QC, Canada, Gilles Bourque, Siemens Canada Limited, Dorval, QC, Canada, Jeffrey Bergthorson, McGill University, Montreal, Canada, QC, Canada

Emissions Characteristics of Combustion of Lean Secondary Premixed Gas Jets Injected Into Burned Gas From Primary Stage by Lean Premixed Combustion Sup-ported by Reverse Jet Flame Holding GT2016-56826 Shigeru Hayashi, Hosei university, Tokyo, Tokyo,

Japan, Takumi Saitoh, Hosei University, Koga-nei, Tokyo, Japan, Takafumi Nakasu, Takumi Hiroi, Hosei University, kogani, Tokyo, Japan, Hideshi Yamada, The Japan Aerospace Agency, Aeronautical Technology Center, Chofu, Tokyo, Japan

9:00

Experimental Study of Mayenite-Based Catalysts Effectiveness in Reducing Pollu-tion From Biomass Gasification in Fluidized Bed Reactors GT2016-57666 Elisa Savuto, Dip. Sc. e Tecn. per l'Agric. For. Nat. e

En., Universita’ della Tuscia, Viterbo, Italy, Dome-nico Borello, Università di Roma Sapienza, Rome, Italy, Andrea Di Carlo, Dipartimento di Ingegne-ria industriale e dell’informazione e di economia, Università dell’Aquila, L’Aquila, Italy, Stefano Na-tali, DICMA Sapienzaa Università di Roma, Roma, RM, Italy, Antonio Pantaleo, Università Di Bari, Bari, Italy, Franco Rispoli, Sapienza University of Rome, Rome, Italy

Predictive Emissions Monitoring System for Small Siemens Dry Low Emissions Com-bustors: Validation and Application GT2016-57656 Rick Hackney, Siemens Industrial Turbomachin-

ery Ltd, Lincoln, Lincolnshire, United Kingdom, Suresh Sadasivuni, Siemens AG, Montreal, QC, Canada, Jim Rogerson, Ghenadie Bulat, Siemens Industrial Turbomachinery Ltd, Lincoln, Lincoln-shire, United Kingdom

9:30

Foreign Object Damage and Fatigue After Im-pact Simulations on Flat and Curved Hi Nica-lon and Hi Nicalon Type S (MI SiC) Specimens at Room and 1200°C Using Building Block Ap-proach GT2016-58086 Frank Abdi, Alpha Star Corp, Long Beach, CA,

United States, Cody Godines, Marc Villa Mon-tero, AlphaSTAR Corporation, Long Beach, CA, United States, Sung Choi, Naval Air Sys-tems Command, Patuxent River, MD, United States, Gregory Morscher, The University of Akron, Akron, OH, United States, Michael Presby, Zipeng Han, University of Akron, Ak-ron, OH, United States

Investigation of the Combustion Perfor-mance in a Three-Nozzle RQL Combustor GT2016-57308 Bing Ge, Shanghai Jiaotong University, Shang-

hai, China, Yongbin Ji, Shanghai Jiaotong Uni-verstiy, Shanghai, Shanghai, China, Shusheng Zang, SHANGHAI JIAO TONG UNIVERSITY ,CHINA, SHANGHAI, China, yongwen Yuan, Shanghai Jiaotong Univerisity, Shanghai, Chi-na, Jianhua Xin, Shanghai Jiaotong University, Shanghai, China

132 | ASME 2016 TURBO EXPO

FRIDAY, JUNE 17 8:00 - 10:00 AM

COMBUSTION, FUELS & EMISSIONS

CONTROLS, DIAGNOSTICS & INSTRUMENTATION CYCLE INNOVATIONS

Combustor Diagnostics and Micro Devices

Monitoring and Estimation Methods

Turbomachinery Design Aspects in Cycle Innovation

Paper Session • Room 317C • FA-4-29 Paper Session • Room 308B • FA-5-10 Paper Session • Room 402 • FA-6-5

Session Chair: Scott Drennan, Conver-gent Science, Inc.Session Co-Chair: Felix Guethe, General Electric Power

Session Organizer: Lubomir Ribarov, UTC AEROSPACE SYSTEMS

Session Chair: Hans Wettstein, HEW

8:00

The Design and Model Simulation of a Micro Gas Turbine Combustor Supplied With Methane/Syngas Fuels GT2016-56528 Chi-Rong Liu, Hsin-Yi Shih, Chang Gung Uni-

versity, Taoyuan, Taiwan

Readings on Specific Gas Turbine Flame Be-haviours Using an Industrial Combustion Monitoring System GT2016-56166 Fabrice Giuliani, Combustion Bay One e.U., Graz,

Österreich, Austria, Hans Reiss, Meggitt Sensing Systems, Fribourg, Switzerland, Markus Stuetz, Vanessa Moosbrugger, Combustion Bay One e.U., Graz, Austria, Alexander Silbergasser, FH Joan-neum, Graz, Austria

Effects of Rotor-Speed-Ratio and Cross-wind Inlet Distortion on Off-Design Perfor-mance of Contra-Rotating Propelling Unit GT2016-57273 Stavros Vouros, Aristotle University of Thessa-

loniki (AUTH), Thessaloniki, Greece, Theofilos Efstathiadis, Aristotle University, Thessalon-iki, Greece, Alexandros Chasoglou, Cranfield University, Cranfield Bedford, United Kingdom, Anestis I. Kalfas, Aristotle University of Thessa-loniki, Thessaloniki, Greece

8:30

Detailed Examination of Two-Staged Mi-cro Gas Turbine Combustor GT2016-57730 Andreas Schwärzle, Thomas O. Monz, Ger-

man Aerospace Center (DLR e.V.), Stuttgart, Germany, Manfred Aigner, German Aero-space Center (DLR), Institute of Combustion Technology, Stuttgart, Germany

Automatic Detection of Defects in a Swirl Burner Array Through an Exhaust Jet Pat-tern Analysis GT2016-56467 Ulrich Hartmann, Institute of Turbomachinery

and Fluid Dynamics, Hannover, Niedersachsen, Germany, Christoph Hennecke, Friedrich Din-kelacker, Institute of Technical Combustion - Leibniz Universität Hannover, Hannover, Nied-ersachsen, Germany, Joerg Seume, Gottfried Wil-helm Leibniz Universitaet, Hannover, Germany

Direct Coupling of a Two-Dimensional Fan Model in a Turbofan Engine Performance Simulation GT2016-56617 Ioannis Templalexis, Hellenic Air Force Acade-

my, Greece, Alexios Alexiou, National Technical University of Athens, Athens, Greece, Ioannis Roumeliotis, Hellenic Naval Academy, Piraeus, 18539, Greece, Vassilios Pachidis, Cranfield Uni-versity, Bedford, United Kingdom, Nikolaos Are-takis, National Technical University of Athens, Attiki, Greece

9:00

Investigation of Thermal and Stress States of the Annular Combustion Chamber Flame Tube Walls GT2016-57479 Vlad Anisimov, Ivan A. Zubrilin, SSAU, Sa-

mara, Russia, Mikhail Yu Orlov, Samara State Aerospace University, Samara, Russia

Virtual Sensing for Rotordynamics GT2016-57206 Simona Moschini, KULeuven, Heverlee, Bel-

gium, Konstantinos Gryllias, Wim Desmet, Bert Pluymers, KU Leuven, Heverlee, Belgium

Helium Turboexpander for Cryogenic Re-frigeration and Liquefaction Cycles: Tran-sient Analysis of Rotor-Stator Interaction GT2016-56793 ASHISH ALEX SAM, Parthasarathi Ghosh, In-

dian Institute of Technology Kharagpur, West Midnapore, West Bengal, India

9:30

Systems Design and Experimental Eval-uation of a High-Altitude Relight Test Facility GT2016-57089 Brendan Paxton, Samir Tambe, San-Mou

Jeng, University of Cincinnati, Cincinnati, OH, United States

Defect Detection in an Annular Swirl-Burn-er-Array by Optical Measuring Exhaust Gases GT2016-57847 Henrik von der Haar, Christoph Hennecke, In-

stitute of Technical Combustion - Leibniz Uni-versität Hannover, Hannover, Germany, Ulrich Hartmann, Institute of Turbomachinery and Fluid Dynamics, Hannover, Niedersachsen, Ger-many, Friedrich Dinkelacker, Institute of Tech-nical Combustion - Leibniz Universität Hannover, Hannover, Niedersachsen, Germany, Joerg Se-ume, Gottfried Wilhelm Leibniz Universitaet, Han-nover, Germany

FINAL PROGRAM | 133

FRIDAY, JUNE 17 8:00 - 10:00 AM

FANS & BLOWERS HEAT TRANSFER: NUMERICAL INTERNAL COOLING

HEAT TRANSFER: INTERNAL AIR SYSTEMS & SEALS (WITH

TURBOMACHINERY)

Numerical Methods and Studies - II

Numerical Internal Cooling: Jet Impingement

Miscellaneous Topics in Internal Air Systems Modeling

Paper Session • Room 318A • FA-9-4 Paper Session • Room 301 • FA-11-4 Paper Session • Room 307A • FA-15-7

Session Chair: Giovanni Delibra, ‘Sapien-za’ University of RomeSession Co-Chair: Tommaso Bonanni, Sa-pienza, University of Rome

Session Organizer: Ali Ameri, The Ohio State UniversitySession Co-Organizer: Okey Kwon, Pusan University

Session Organizer: Guillermo Paniagua, Purdue UniversitySession Co-Organizer: Qiang Zhang, City University London

8:00

Numerical Analysis of Turbulent Jets in Quiescent Medium GT2016-56211 Ritik Singh, Marton Gyuro, Greenheck Fan

Corporation, Schofield, WI, United States

Effect of Rotation on a Gas Turbine Blade Internal Cooling System: Numerical Inves-tigation GT2016-57178 Emanuele Burberi, University of Florence, Flor-

ence, Italy, Daniele Massini, Unversity of Flor-ence, Firenze, Italy, Lorenzo Cocchi, Lorenzo Mazzei, Antonio Andreini, Bruno Facchini, Uni-versity of Florence, Florence, Italy

Subsonic Flow Over Open Cavities: Part 1 Analytical Models and Numerical Investi-gations GT2016-56414 Weidong SHAO, Xi’an Jiaotong University, Xi’an,

Shaanxi, China, Jun Li, Institute of Turboma-chinery, Xi’an Jiaotong Univ., Xi’an, Shaanxi, China

8:30

Numerical Study on the Passive Control of the Aeroelastic Response in Large Ax-ial Fans GT2016-57306 Alessio Castorrini, Sapienza University of

Rome, Rome, Italy, Alessandro Corsini, Sapi-enza University of Rome, Roma, Italy, Antho-ny G. Sheard, AGS Consulting, LLC, Atlanta, GA, United States, Franco Rispoli, Sapienza University of Rome, Rome, Italy

Influence of Topology on Heat Transfer in a Double Wall Cooling Channel: Potential of Series-Linked Jets GT2016-56270 Li Yang, Univ of Pittsburgh, Pittsburgh, PA, United

States, Weihong Li, Tsinghua University, Depart-ment of Thermal Engineering, Beijing, China, Jing Ren, Tsinghua University, Beijing, China, Minking Chyu, Univ Of Pittsburgh, Pittsburgh, PA, United States, Hongde Jiang, Tsinghua University, Bei-jing, China

Subsonic Flow Over Open Cavities: Part 2 Passive Control Methods GT2016-56415 Weidong SHAO, Xi’an Jiaotong University, Xi’an,

Shaanxi, China, Jun Li, Institute of Turboma-chinery, Xi’an Jiaotong Univ., Xi’an, Shaanxi, China

9:00

A Shape Memory Alloy-Based Morphing Axial Fan Blade: Functional Characteri-zation and Fluid Dynamic Performance GT2016-57337 Alessio Suman, Università di Ferrara, Ferrara,

Italy, Annalisa Fortini, Nicola Aldi, Mattia Merlin, Michele Pinelli, University of Ferrara, Ferrara, Italy

LES of a Round Impinging Jet: Investiga-tion of the Link Between Nusselt Second-ary Peak and Near-Wall Vortical Structures GT2016-56111 Pierre Aillaud, Florent Duchaine, Laurent Gic-

quel, CERFACS, Toulouse, France

Aero-Thermo-Mechanical Modelling and Validation of Transient Effects in a High Pressure Turbine Internal Air System GT2016-57739 Vlad Ganine, Dario Amirante, Nicholas J. Hills,

University of Surrey, Guildford, United Kingdom

9:30

A Comparison of Actuator Disc Models for Axial Flow Fans in Large Air-Cooled Heat Exchangers GT2016-56491 Michael Wilkinson, Francois Louw, Sybrand

J. van der Spuy, Theodor W. von Backström, Stellenbosch University, Stellenbosch, West-ern Cape, South Africa

Effect of Bleed Position and Bleed Angle on Impingement Cooling of a Spherical-Dim-pled Surface GT2016-57540 Zhao Liu, Xi’an Jiaotong University, Xi’An, China,

Xing Yang, Xi’An Jiaotong University, Shaanxi, China, Jun Li, Institute of Turbomachinery, Xi’an Jiaotong Univ., Xi’an, Shaanxi, China, Zhen-ping Feng, Xi’an Jiaotong University, Shaanxi, Shaanxi, China, Terrence Simon, University Of Minnesota, Minneapolis, MN, United States

CFD Simulations of a Meshing Gear Pair GT2016-57454 Emanuele Burberi, Tommaso Fondelli, Antonio

Andreini, Bruno Facchini, University of Flor-ence, Florence, Italy, Lorenzo Cipolla, GE Avio s.r.l., Rivalta di Torino (TO), Italy

134 | ASME 2016 TURBO EXPO

FRIDAY, JUNE 17 8:00 - 10:00 AM

HEAT TRANSFER: EXPERIMENTAL INTERNAL

COOLING

HEAT TRANSFER: EXPERIMENTAL FILM COOLING

MICROTURBINES, TURBOCHARGERS & SMALL

TURBOMACHINES

Experimental Internal Cooling: Special Topics Endwall and Shroud Cooling Microturbine and Small

Compressor Performance

Paper Session • Room 307B • FA-16-5 Paper Session • Room 308A • FA-19-5 Paper Session • Room 308C • FA-23-4

Session Organizer: Lamyaa El-Gabry, The American University of CairoSession Co-Organizer: Harika Kahveci, Middle East

Session Chair: Seth Lawson, US Department of EnergySession Co-Organizer: David Bogard, Univ Of Texas At Austin

Session Chair: Michael Vick, U.S. Naval Re-search LabSession Co-Chair: Aki Grönman, Ahti Jaati-nen-Varri, Lappeenranta University of Technology

8:00

Heat Transfer and Pressure Loss Mea-surements in Additively Manufactured Wavy Microchannels GT2016-56510 Kathryn Kirsch, Penn State University, State

College, PA, United States, Karen Thole, Penn-sylvania State Univ, University Park, PA, Unit-ed States

Turbine Vane Endwall Film Cooling With Slashface Leakage and Discrete Hole Con-figuration GT2016-56318 Nafiz H. K. Chowdhury, Chao-Cheng Shiau, Tex-

as A&M University, College Station, TX, United States, JC Han, Texas A & M University, College Station, TX, United States, Luzeng Zhang, Hee-Koo Moon, Solar Turbines Inc., San Diego, CA, United States

Multi-Disciplinary Optimization of a Mixed-Flow Compressor Impeller GT2016-57008 Olaf H.F. Diener, Sybrand J. van der Spuy, The-

odor W. von Backström, Stellenbosch Univer-sity, Stellenbosch, Western Cape, South Africa, Thomas Hildebrandt, NUMECA Ingenieurbüro, Altdorf b. Nürnberg, Germany

8:30

Scaling Roughness Effects on Pressure Loss and Heat Transfer of Additively Manufactured Channels GT2016-58093 Curtis Stimpson, Jacob C Snyder, Pennsylva-

nia State University, State College, PA, United States, Karen Thole, Pennsylvania State Univ, University Park, PA, United States, Dominic Mongillo, Pratt & Whitney, East Hartford, CT, United States

Turbine Blade Platform Film Cooling With Simulated Swirl Purge Flow and Slashface Leakage Conditions GT2016-56321 Andrew F Chen, Chao-Cheng Shiau, Texas A&M

University, College Station, TX, United States, JC Han, Texas A & M University, College Station, TX, United States

Multi-Disciplinary Optimization of a Cen-trifugal Compressor for Micro-Turbine Applications GT2016-57278 andrea perrone, University of Genoa, genova, It-

aly, Francesca Satta, University of Genova, Geno-va, Italy, gianluca ricci, Luca Ratto, University of Genoa, genova, Italy, Pietro Zunino, Università di Genova, Genova, Italy

9:00

Reduction in Flow Parameter Resulting From Volcanic Ash Deposition in Engine Representative Cooling Passages GT2016-57296 Sebastien Wylie, Alexander Bucknell, Peter

Forsyth, University of Oxford, Oxford, United Kingdom, David Gillespie, Osney Mead In-dustrial Estate/University of Oxford, Oxford, United Kingdom, Matthew McGilvray, Uni-versity of Oxford, Oxford, Oxfordshire, United Kingdom

Contoured Endwall Flow and Heat Trans-fer Experiments With Combustor Coolant and Gap Leakage Flows for a Turbine Noz-zle Guide Vane GT2016-56675 Reema Saxena, Mahmood H. Alqefl, University of

Minnesota, Minneapolis, MN, United States, Zhao Liu, Xi’an Jiaotong University, Xi’An, China, Hee-Koo Moon, Luzeng Zhang, Solar Turbines Inc., San Diego, CA, United States, Terrence Simon, University Of Minnesota, Minneapolis, MN, Unit-ed States

Altitude Effects on the Performance of Small Radial Turbomachinery: Part I Com-pressor Impellers GT2016-56808 Dries Verstraete, The University of Sydney, Syd-

ney, NSW, Australia, Kjersti Lunnan, The Univer-sity of Sydney, The University of Sydney, NSW, Australia

9:30

Combustor-Turbine Aerothermal Interac-tion in an Axial Turbine: Influence of Varied Inflow Conditions on Endwall Heat Trans-fer and Film Cooling Effectiveness GT2016-57171 Holger Werschnik, Jonathan Hilgert, Martin

Bruschewski, Heinz-Peter Schiffer, Technische Universität Darmstadt, Darmstadt, Hessen, Ger-many

Altitude Effects on the Performance of Small Radial Turbomachinery: Part II Tur-bine Impellers GT2016-56811 Dries Verstraete, The University of Sydney, Syd-

ney, NSW, Australia, Kjersti Lunnan, The Univer-sity of Sydney, The University of Sydney, NSW, Australia

FINAL PROGRAM | 135

FRIDAY, JUNE 17 8:00 - 10:00 AM

OIL & GAS APPLICATIONS STEAM TURBINES STRUCTURES & DYNAMICS: ROTORDYNAMICS

Transient Performance of Turbo-Generators

HP/IP Turbines Blade Design and Operation

Bearings - Modeling & Validation 2

Tutorial Session • Room 317A • FA-24-20 Paper Session • Room E6 • FA-26-2 Paper Session • Room 300 • FA-31-10

Session Chair: Pablo Bellocq, TOTAL Session Chair: Brian Haller, GE PowerSession Co-Chair: Zhenping Feng, Xi’an Ji-aotong

Session Chair: Tae Ho Kim, Kookmin Uni-versitySession Co-Chair: Thomas Chirathadam, Southwest Research InstituteMartin Conlon, National Research Council Canada

8:00

The Design and Testing of a Low Reaction Turbine Blade Profile for HP and IP Steam Flow Path GT2016-56030 Guoliang Deng, Dongfang Steam Turbine Co.,Ltd.,

Deyang,Sichuan,China, China, Qi Sun, Qilin Wu, Xiaoping Fan, Dongfang Steam Turbine Co.,Ltd., Deyang, Deyang,Sichuan, China, Mingyan Yin, Xi’an Jiaotong University, Xi’an, Shaanxi, Chi-na, Chaoyang Tian, Dongfang Steam Turbine Co.,Ltd., Deyang, Deyang,Sichuan, China, Yan Ping, Dongfang Steam Turbine Co.,Ltd., Dey-ang,Sichuan,China, China

Theoretical Analysis and Numerical Simu-lation of Oil Lubricated Foil Bearing With Elastic Supported Bump Foil Structure GT2016-56267 Guanghui Zhang, Harbin Institute of Technolo-

gy, Harbin, China, Qiang Chen, jiajia yan, zhan-sheng liu, xianghe wang, Harbin Institute of Technology, China, Harbin, China, Fangcheng Xu, University of Texas at Arlington, Arlington, TX, United States

8:30

Reducing Solid Particle Erosion on Steam Turbine Stages GT2016-57561 Tie Chen, GE, Rugby, United Kingdom, Gurnam

Singh, GE Power, Rugby, Warwickshire, United Kingdom, Peter Millington, Brian Haller, GE Power, Rugby, Warwickshire, United Kingdom

Non-Invasive Parameter Identification in Rotordynamics via Fluid Film Bearings: Linking Active Lubrication and Operation-al Modal Analysis GT2016-57618 Ilmar Ferreira Santos, Peter Svendsen, Tech-

nical University of Denmark, Kgs. Lyngby, Den-mark

9:00

Investigation on the Effect of Cooling Hole Structure on the Steam Cooling Perfor-mance of the Intermediate Pressure Tur-bine Stages GT2016-56179 Jun Li, Institute of Turbomachinery, Xi’an Ji-

aotong Univ., Xi’an, Shaanxi, China, Wenhao Huo, Xi’An Jiaotong University, Xi’An, Shaanxi, China, Zhenping Feng, Xi’an Jiaotong University, Shaanxi, Shaanxi, China

“Modeling a Spiral Groove Thrust Bearing Using 3-D, Two-Way Fluid Structure Inter-action With Conjugate Heat Transfer” GT2016-57933 Kevin Hoopes, Jason Wilkes, Jeff Moore, South-

west Research Institute, San Antonio, TX, United States, Joseph Grieco, Halliburton, na, TX, United States, Kevin Passmore, Halliburton, Carrollton, TX, United States, Jerry Brady, BP, Anchorage, AK, United States

9:30

An Improved Test Facility for Studying De-posit Fouling on Steam Turbine Blades GT2016-57575 Alan May Estebaranz, Durham University, Co.

Durham, United Kingdom, Richard Williams, Durham University, Durham, United Kingdom, Simon Hogg, School of Engineering, Durham, United Kingdom, Phil Dyer, Durham University, Durham, United Kingdom

Saturated Water Journal Bearings of a Turbo Compressor GT2016-58131 Tadayoshi Shoyama, Kazuyuki Kouda, Takeshi

Ogata, Panasonic Corporation, Moriguchi, Osa-ka, Japan

T

U

T

O

R

I

A

L

136 | ASME 2016 TURBO EXPO

FRIDAY, JUNE 17 8:00 - 10:00 AM

STRUCTURES & DYNAMICS: STRUCTURAL MECHANICS,

VIBRATION & DAMPING

SUPERCRITICAL CO2 POWER CYCLES

TURBOMACHINERY: AXIAL FLOW FAN & COMPRESSOR

AERODYNAMICS

Turbomachine Aerodynamic Interaction and Forced

Response 1

sCO2 System and Component Design

Endwall Treatments and Tandem Blades

Paper Session • Room 307C • FA-34-5 Paper Session • Room 317B • FA-36-6 Paper Session • Room E1 • FA-37-3

Session Chair: Maria Angelica Mayorca, Siemens Industrial TurbomachinerySession Co-Chair: Damian Vogt, Universi-ty of Stuttgart

Session Chair: Grant Musgrove, Southwest Research Institute

Session Chair: Sungho Yoon, GE Global Re-searchSession Co-Chair: Giridhar Jothiprasad, General Electric

8:00

Experimental Investigation of the Up-stream Effect of Different Low Pressure Turbine Exit Guide Vane Designs on Ro-tor Blade Vibration GT2016-56067 Florian Schönleitner, Technische Universität

Graz, Graz, Austria, Thorsten Selic, Christian Schitter, Franz Heitmeir, Andreas Marn, Graz University of Technology, Graz, Austria

Preliminary Design and Considerations of a MWE Scale Supercritical CO2 Integral Test Loop GT2016-56426 Junfeng Wang, Yanping Huang, Jinguang Zang,

Guangxu Liu, Nuclear Power Institute of China, Chengdu, China

Numerical Study of Camber and Stagger Angle Effects on the Aerodynamic Perfor-mance of Tandem-Blade Cascades GT2016-56173 Behshad Ghazanfari, Isfahan University of Tech-

nology, Isfahan, Iran, Mahdi Nili-Ahamadabadi, Isfahan University of Technology, Esfahan, Iran, Ashkan Torabi Farsani, Mohammad Hossein Noorsalehi, Isfahan University of Technology, Isfahan, Iran

8:30

On the Effect of Axial Spacing Between Rotor and Stator Onto the Blade Vibra-tions of a Low Pressure Turbine Stage at Engine Relevant Operating Conditions GT2016-56069 Andreas Marn, Graz University of Technolo-

gy, Graz, Austria, Florian Schönleitner, Tech-nische Universität Graz, Graz, Austria, Mathi-as Mayr, Thorsten Selic, Franz Heitmeir, Graz University of Technology, Graz, Austria

Integration and Optimization of Coal Gas-ification Systems With a Near-Zero Emis-sions Supercritical Carbon Dioxide Power Cycle GT2016-58066 Xijia Lu, University of New Orleans, New Orleans,

NC, United States, Brock Forrest, Scott T Mar-tin, Michael McGroddy, Jeremy Fetvedt, David Freed, 8 Rivers Capital, LLC, Durham, NC, United States

Particle Image Velocimetry Investigations of a Subsonic Compressor Tandem Cascade GT2016-57726 Charlotte Hertel, TU Braunschweig, Braunsch-

weig, Germany, Christoph Bode, Technische Universitaet Braunschweig, Braunschweig, OO, Germany, Dragan Kozulovic, Hochschule für An-gewandte Wissenschaften Hamburg (HAW Ham-burg), 20099 Hamburg, Germany, Tim Schneider, MTU Aero Engines AG, Munich, Germany

9:00

Maximum Mistuned Vibration Ampli-tude With Aerodynamic Damping GT2016-57000 Carlos Martel, Universidad Politécnica De

Madrid, Madrid, Madrid, Spain, Luo Cuiping, Beijing Institute of Technology, Beijing, Bei-jing, China

Supercritical CO2 Radial Turbine Design Performance as a Function of Turbine Size Parameters GT2016-58137 Jianhui Qi, Thomas Reddell, The University of

Queensland, Brisbane, QLD, Australia, Kan Qin, The University of Queesnland, Brisbane, QLD, Australia, Kamel Hooman, The University of Queensland, Brisbane, QLD, Australia, Ingo Jahn, The University of Queensland, QLD, Queensland, Australia

Some Perspectives on the Treatment of Three-Dimensional Flows on Axial Com-pressor Blading GT2016-57617 Hayder Obaida, Motoyuki Kawase, Aldo Rona,

University of Leicester, Leicester, Leicestershire, United Kingdom, J. Paul Gostelow, Leicester Univ, Leicester Le17rh, United Kingdom

9:30

Unsteady Forces in Last Stage LP Steam Turbine Rotor Blades With Exhaust Hood GT2016-57610 Romuald Rzadkowski, Jan Surwilo, Leszek

Kubitz, Institute of Fluid Flow Machinery, Gdansk, Poland, Mariusz Szymaniak, Polish Academy of Sciences, Institute of Fluid-Flo, Gdansk, Poland, Piotr Lampart, Institute of Fluid Flow Machinery, Gdansk, Poland

Forced Response Analysis of Supercritical CO2 Radial Inflow Turbine Designed for Concentrating Solar Power GT2016-58144 Mohsen Modir Shanechi, Martin Veidt, Kamel

Hooman, Performance and Life Characteristics of Hybrid Gas Bearing in a 10 MW Supercriti-cal CO2 Turbine GT2016-57695 Azam Thatte, Adrian Loghin, Youngwon Shin,

Balajee Ananthasayanam

Investigation on the Effect of Streamwise Grooves on Controlling Corner Flow Sep-aration GT2016-58141 Wei-lin Yi, Lucheng Ji, Beijing Institute of Tech-

nology, Beijing, China, jiabin li, bit, beijing, China, Jia Yu, Beijing Institute of Technology, Beijing, China

FINAL PROGRAM | 137

FRIDAY, JUNE 17 8:00 - 10:00 AM

TURBOMACHINERY: AXIAL FLOW FAN & COMPRESSOR

AERODYNAMICS

TURBOMACHINERY: AXIAL FLOW TURBINE

AERODYNAMICS

TURBOMACHINERY: RADIAL TURBOMACHINERY

AERODYNAMICS

Rotor Tip Clearance Effects Specific Studies in Turbine Aerodynamics II

Radial Compressors - Stall & Surge

Paper Session • Room 327 • FA-37-9 Paper Session • Room E4 • FA-38-18 Paper Session • Room 403 • FA-42-8

Session Chair: Anton Streit, Siemens AG,Session Co-Chair: Martin Lange, TU Dresden

Session Chair: Theoklis Nikolaidis, Cran-field UniversitySession Co-Chair: Eduardo Anselmi, Cran-field University, Giacomo Persico, Politecni-co Di Milano

Session Chair: Harold Hipsky, UTC Aero-space Systems

8:00

Effects of double-leakage tip clearance flow on the performance of a compres-sor stage with a large rotor tip gap GT2016-56050 Chunill Hah, NASA/Glenn, Westlake, OH,

United States

Numerical Evaluation of the Condition of a Jet Engine Through Exhaust Jet Analysis GT2016-56947 Rafael Adamczuk, FTT (UK) Ltd., Derby, United

Kingdom, Joerg Seume, Gottfried Wilhelm Leibniz Universitaet, Hannover, Germany

A 3D Time-Accurate CFD Simulation of the Flow Field Inside a Vaneless Diffuser During Rotating Stall Conditions GT2016-57604 Michele Marconcini, University of Florence, Firen-

ze, Italy, Alessandro Bianchini, Univ of Florence, Firenze, Italy, Matteo Checcucci, University of Florence, Firenze, Italy, Giovanni Ferrara, Univ Of Florence, Florence 50139, Italy, Andrea Arnone, University Of Florence, Florence, 50139, Italy, Lo-renzo Ferrari, National Research Council of Ita-ly, Sesto Fiorentino (FI), Italy, Davide Biliotti, GE Oil&Gas, Firenze, Italy, Dante Tommaso Rubino, GE Oil & Gas, Firenze, Italy

8:30

Accounting for Eccentricity in Compres-sor Performance Predictions GT2016-56681 Anna M. Young, University of Cambridge,

Cambridge, Select State, United Kingdom, Teng Cao, University of Cambridge, Whittle Laboratory, Cambridge, United Kingdom, Ivor Day, Whittle Laboratory, Cambridge Cb3ody, United Kingdom, John Longley, Cambridge University, Cambridge, OTHER, United King-dom

An Energy Based Fouling Model for Gas Turbines: EBFOG GT2016-58044 Nicola Casari, University of Ferrara, Ferrara, Ita-

ly, Alessio Suman, Università di Ferrara, Ferrara, Italy, Michele Pinelli, University of Ferrara, Ferr-ara, Italy, Luca Di Mare, Imperial College, London, United Kingdom, Francesco Montomoli, Imperial College London, London, United Kingdom

Numerical Analysis of an Alternate Stall in a Radial Vaned Diffuser GT2016-56485 Emmanuel Benichou, Ecole centrale de Lyon,

Ecully, France, Isabelle Trebinjac, LMFA - Ecole Centrale de Lyon, Ecully, France

9:00

Effects of Tip Clearance and Operating Conditions on the Flow Structure and Turbulence Within an Axial Compressor Rotor Passage GT2016-57050 Yuanchao Li, Huang Chen, Johns Hopkins

University, Baltimore, MD, United States, Da-vid Tan, Johns Hopkins University, Columbia, MD, United States, Joseph Katz, Johns Hop-kins University, Baltimore, MD, United States

A Second Turbulent Regime When a Fully Developed Axial Turbulent Flow Enters a Rotating Pipe GT2016-57499 Ferdinand-J. Cloos, Anna-L. Zimmermann, Tech-

nische Universität Darmstadt, Darmstadt, Ger-many, Peter F. Pelz, TU Darmstadt, Darmstadt, Hessen, Germany

An Investigation Into the Variation of Cen-trifugal Compressor Sensitivity to Inlet Swirl With Initial Form Parameter Selec-tion GT2016-57958 Eric Krivitzky, ConceptsNREC, White River Junc-

tion, VT, United States

9:30

Numerical Analysis of Transonic Com-pressor With Various Tip Clearance Gap GT2016-58117 Yasunori Sakuma, The University of Tokyo,

Tokyo, Japan, Toshinori Watanabe, Takehiro Himeno, University of Tokyo, Tokyo, Japan

Thermal Investigation of Integrated Com-bustor Vane Concept Under Engine-Realis-tic Conditions GT2016-57355 Simon Jacobi, Budimir Rosic, University of Ox-

ford, Oxford, United Kingdom

Experimental Determination of Mechan-ical Stress Induced by Rotating Stall in Unshrouded Impellers of Centrifugal Com-pressors GT2016-56436 Philipp Jenny, Yves Bidaut, MAN Diesel & Turbo

Schweiz AG, Zurich, Switzerland

138 | ASME 2016 TURBO EXPO

FRIDAY, JUNE 17 8:00 - 10:00 AM

TURBOMACHINERY: GENERAL INTEREST

Presentations

Tutorials Session • Room 318C • FA-43-1

Session Chair: Patricia Cargill, Ge Avia-tion US

8:00

CFD and Cloud Computing GT2016-57016 Michael Ni, Aerodynamic Solutions, Danville,

CA, United States, Ron-Ho Ni, AeroDynamic Solutions, Inc., Manchester, CT, United States, William Humber, AeroDynamic Solutions, Inc, Danville, CA, United States, John Clark, Wright Patterson Air Force Base (AFRL), WPAFB, OH, United States

8:30

Root cause analysis: Untangling the truth when CFD simulations and Experi-mental Data do not match GT2016-57019 Ron-Ho Ni, AeroDynamic Solutions, Inc., Man-

chester, CT, United States, Michael Ni, Aerody-namic Solutions, Danville, CA, United States, William Humber, Rafael Mudafort, Aero-Dynamic Solutions, Inc, Danville, CA, United States, John Clark, Wright Patterson Air Force Base (AFRL), WPAFB, OH, United States

9:00

Development on The Three types of Cen-trifugal Compressor Model With High Efficiency GT2016-57170 Hong-won Kim, Fluid Machinery Research,

Hyundai Heavy Ind Co Ltd, Ulsan 682-792, Korea (Republic), Young Hoon Kim, Fluid Machinery Research Department, Hyundai Heavy Industries Co., Ltd, Ulsan, Korea (Re-public)

9:30

FINAL PROGRAM | 139

FRIDAY, JUNE 17 10:15AM - 12:45 PM

AIRCRAFT ENGINE COMBUSTION, FUELS & EMISSIONS

COMBUSTION, FUELS & EMISSIONS

Inlets and Operability Ignition & Autoignition Combustion Dynamics: Damping & Control

Paper Session • Room E4 • FB-1-1 Paper Session • Room E3 • FB-4-1 Paper Session • Room 317C • FB-4-23

Session Chair: Niklas Neupert, HSU HamburgSession Co-Chair: Anthony Ferrar, Uni-versity of Florida

Session Chair: Holger Streb, Siemens PowerSession Co-Chair: Christoph Hirsch, TU München

Session Chair: Mirko Bothien, Ansaldo En-ergiaSession Co-Chair: Nicolas Noiray, ETH Zu-rich

10:15

Entrance Aspect Ratio Effect on S-Duct Inlet Performance at High-Subsonic Flow GT2016-57875 Asad Asghar, Royal Military College Of Can-

ada, Kingston, ON, Canada, Robert Stowe, DRDC Valcartier, Quebec City, QC, Canada, William Allan, Royal Military College Of Can-ada, Kingston, ON, Canada, Derrick Alexan-der, Martec Limited, Halifax, NS, Canada

Coke Deposition Effect on the Flow Distri-bution Characteristics of KeroseneUnder Supercritical Pressure GT2016-56146 HaoRan Huang, HongWu Deng, GuoQiang Xu,

ZhouXia Jia, YanChen Fu, Beihang University, Beijing, China

Impact of Quarter Wave Tube Arrange-ment on Damping of Azimuthal Modes GT2016-56450 Max Zahn, Technical University Munich, Gar-

ching, Bavaria, Germany, Moritz Schulze, Tech-nische Universitaet Muenchen, Garching bei Muenchen, Bavaria, Germany, Christoph Hirsch, TU München, München, Germany, Thomas Sat-telmayer, Technical Univ Munich, Garching, Ger-many

10:4

5

Low Frequency Distortion in Civil Ae-ro-Engine Intake GT2016-56203 Mauro Carnevale, Imperial College of London,

London, United Kingdom, Feng Wang, Imperi-al College London, London, United Kingdom, Luca Di Mare, Imperial College, London, Unit-ed Kingdom

Random Behavior of Kerosene Spray Autoi-gnition in Crossflow GT2016-57043 Yongsheng Zhao, chi zhang, Yuzhen Lin, Beihang

University, Beijing, China

Effects of Fluidic Control of Air-Flow Dis-tribution on Staged Lean Jet Engine Burn-er GT2016-57453 Seiji Yoshida, Japan Aerospace Exploration

Agency, Tokyo, Japan, Denis Schneider, German Aerospace Center, Cologne, Germany, Christoph Hassa, German Aerospace Center, Köln, Germa-ny

11:15

Fan-Intake Interaction Under High Inci-dence GT2016-56561 Teng Cao, Nagabhushana Rao Vadlamani,

University of Cambridge, Whittle Laboratory, Cambridge, United Kingdom, Paul G. Tucker, University of Cambridge, Cambridge, Unit-ed Kingdom, Angus R. Smith, Michal Slaby, Christopher T. J. Sheaf, Rolls-Royce plc, Der-by, United Kingdom

Influence of Main Swirler Vane Angle on the Ignition Performance of TeLESS-II Combustor GT2016-56764 Bo Wang, chi zhang, Yuzhen Lin, Xin Hui, Bei-

hang University, Beijing, Beijing, China, Jibao Li, AVIC Commercial Aircraft Engine Co., Ltd, Shang-hai, China

Acoustic Damper Placement and Tuning for Annular Combustors: An Adjoint-Based Optimization Study GT2016-57799 Georg Atta Mensah, Technische Universität Ber-

lin, Berlin, Germany, Jonas P. Moeck, TU Berlin, Berlin, Germany

11:4

5

Mixing Enhancement Induced by a Delta Wing in Supersonic Flows GT2016-56055 Wei Huang, Shi-bin Li, Li Yan, Jun Liu, Na-

tional University of Defense Technology, Changsha, Hunan, China

Development of a Model for Auto-Ignition Delays and Its Use for the Prediction of Pre-mix Combustion Reliability GT2016-57585 Roda bounaceur, LRGP CNRS, Nancy, France,

PIERRE ALEXANDRE GLAUDE, Cnrs Lrgp, Nan-cy, France, Baptiste Sirjean, René Fournet, LRGP CNRS, Nancy, France, Pierre Montagne, GE Pow-er & Water, Belfort, France, Matthieu Vierling, GE Energy Products Europe, BELFORT, France, Michel Molière, UTBM (universite De Technologie De Belfort Montbél, BELFORT, France

Control of the Precessing Vortex Core by Open and Closed-Loop Forcing in the Jet Core GT2016-57686 Phoebe Kuhn, Jonas Moeck, TU Berlin, Berlin,

Germany, Christian Oliver Paschereit, Chair of Fluid Dynamics, Hermann-Föttinger-Institut, TU Berlin, Berlin, Germany, Kilian Oberleithner, In-stitute of Fluid Dynamics and Technical Acous-tics, TU Berlin, Berlin, Berlin, Germany

12:15

Mixing Enhancement with Rotating Ramps in a Scramjet Engine GT2016-56083 Liang Jin, Wei Huang, ZHEN LIU, Jun Liu,

National University of Defense Technology, Changsha, China

Liquid Fuel Composition Effects on Forced, Non-Premixed Ignition GT2016-56163 Brandon Sforzo, Georgia Institute of Technology,

Atlanta, GA, United States, Hoang M. Dao, Aerojet Rocketdyne, Redmond, WA, United States, Sheng Wei, Georgia Institute of Technology, Atlanta, GA, United States, Jerry Seitzman, Georgia Inst Of Tech, Atlanta, GA, United States

Effect of Preheating on Flame Structure of a Swirl Stabilized Combustor With Porous Insert to Control Thermoacoustics GT2016-58064 Daniel Depperschmidt, John Kornegay, James

Allen, Ajay Agrawal, University of Alabama, Tuscaloosa, AL, United States

140 | ASME 2016 TURBO EXPO

FRIDAY, JUNE 17 10:15AM - 12:45 PM

CONTROLS, DIAGNOSTICS & INSTRUMENTATION CYCLE INNOVATIONS

HEAT TRANSFER: INTERNAL AIR SYSTEMS & SEALS (WITH

TURBOMACHINERY)

Topics in Controls and Diagnostics Combined Cycles Performance Hot Gas Ingestion and

Rim Seals II

Tutorial Session • Room 308B • FB-5-1 Paper Session • Room 317A • FB-6-6 Paper Session • Room 301 • FB-15-8

Session Chair: Lubomir Ribarov, UTC AEROSPACE SYSTEMS,Session Co-Chair: William Rhoden, Ham-ilton Sundstrand, Manuj Dhingra, Pratt & Whitney, Sebastien Borguet, University of Liege, Yiguang Li, Cranfield University

Session Chair: Tong-seop Kim, Inha Univer-sity

Session Organizer: Peter Smout, Rolls-RoyceSession Co-Organizer: Charles Haldeman, Pratt/Whitney

10:15

Dynamic Turbine Clearance Simulation Considering the Influence of Tempera-ture on Mechanical Load-Induced Dis-placements GT2016-58021 Roman L. Zelenskyi, Sergiy Yepifanov, IGOR

F. KRAVCHENKO, Igor Loboda, Yevgen Martseniuk

EXHAUST GAS RECIRCULATION TO IM-PROVE PART LOAD PERFORMANCE ON COMBINED CYCLE POWER PLANTS GT2016-56229 Klas Jonshagen, Siemens Industrial Turboma-

chinery ab, Finspong, Sweden

Numerical Characterization of Hot Gas In-gestion Through Turbine Rim Seals GT2016-57421 Riccardo Da Soghe, Cosimo Bianchini, Ergon

Research, Firenze, Italy, Carl Sangan, James Sco-bie, G.D. Lock, University of Bath, Bath, United Kingdom

10:4

5

Kalman Filter Development for Real Time Proper Orthogonal Decomposition Disc Temperature Mode GT2016-56330 Andrew van Paridon, University of Oxford,

Oxford, Oxfordshire, United Kingdom, Marko Bacic, University of Oxford, Oxford, United Kingdom, Peter Ireland, Oxford University, Oxford, United Kingdom

COMBINED CYCLE ENGINE CASCADES ACHIEVING HIGH EFFICIENCY GT2016-58004 Andy Schroder, University of Cincinnati, Fort

Mitchell, KY, United States, Mark Turner, Univer-sity of Cincinnati, Cincinnati, OH, United States, Rory A. Roberts, Wright State University, Dayton, OH, United States

Using a Tracer Gas to Quantify Sealing Ef-fectiveness for Engine Realistic Rim Seals GT2016-58095 Kenneth Clark, Michael Barringer, Penn State

University, State College, PA, United States, Kar-en Thole, Pennsylvania State Univ, University Park, PA, United States, Carey Clum, Pratt & Whitney Corp., East hartford, CT, United States, Paul Hiester, Curtis Memory, Christopher Ro-bak, Pratt & Whitney, East Hartford, CT, United States

11:15

A Comparative Study on N-Dot Acceler-ation Technique GT2016-57341 Shubo Yang, Xi Wang, Beihang University,

Beijing, China

A Combined Power Plant Fueled by Syngas Produced in a Downdraft Gasifier GT2016-58159 bernardo fortunato, Sergio Camporeale, Marco

torresi, francesco fornarelli, gianluigi brunetti, politecnico di Bari, Bari, Italy, Antonio Pantaleo, Università Di Bari, Bari, Italy

Pressure Distortion Effects on Rim Seal Performance in a Linear Cascade GT2016-58098 Jeffrey Gibson, Siemens Energy, Charlotte, NC,

United States, Karen Thole, Pennsylvania State Univ, University Park, PA, United States, Jesse Christophel, Curtis Memory, Pratt & Whitney, East Hartford, CT, United States, Thomas Prais-ner, Pratt And Whitney, Hartford, CT, United States

11:4

5

A Damage Evaluation Model of Turbine Blade for Gas Turbine GT2016-56817 Dengji Zhou, Shanghai Jiao Tong Univ, Shang-

hai, OO, China, Meishan Chen, Shanghai Jiao Tong University, Shanghai, China, Huisheng Zhang, Shanghai Jiao Tong Univ, Shanghai, China, Shilie Weng, Shanghai Jiao Tong Uni-versity, Shanghai, China

Gas Turbine Performance Enhancement by Inlet Air Cooling and Coolant Pre-Cooling Using an Absorption Chiller GT2016-58014 H. M. Kwon, Jeong ho Kim, Inha University,

Incheon, Korea (Republic), Tong-seop Kim, Inha University, Incheon 402-751, Korea (Republic)

Effects of Purge Jet Momentum on Sealing Effectiveness GT2016-58099 Kenneth Clark, Michael Barringer, Penn State

University, State College, PA, United States, Kar-en Thole, Pennsylvania State Univ, University Park, PA, United States, Carey Clum, Pratt & Whitney Corp., East hartford, CT, United States, Paul Hiester, Curtis Memory, Christopher Ro-bak, Pratt & Whitney, East Hartford, CT, United States

12:1

5

Measurements and Modelling of Ingress in a New 1.5-Stage Turbine Research Facility GT2016-57163 Marios Patinios, James Scobie, Carl Sangan,

University of Bath, Bath, Somerset, United King-dom, J Michael Owen, University of Bath, Bath BA2 7AY, United Kingdom, G.D. Lock, University of Bath, Bath, Somerset, United Kingdom

FINAL PROGRAM | 141

FRIDAY, JUNE 17 10:15AM - 12:45 PMHEAT TRANSFER:

COMBUSTORS (WITH COMBUSTION, FUELS &

EMISSIONS)

HEAT TRANSFER: EXPERIMENTAL FILM COOLING

MICROTURBINES, TURBOCHARGERS & SMALL

TURBOMACHINES

Thermal-Structural Interaction - Experimental Validation Hole Geometry Effects-2 Microturbine Combustion and

Fuels

Paper Session • Room 307A • FB-18-2 Paper Session • Room 307B • FB-19-8 Paper Session • Room 308C • FB-23-5

Session Organizer: Jay Kapat, University of Central Florida (UCF)Session Co-Organizer: Jose Maria Rey Villazon, GE Aviation

Session Chair: Stephen Lynch, Penn State UniversitySession Co-Chair: James Rutledge, Air Force Institute of Technology

Session Chair: Jeffrey Armstrong, Flexener-gy Energy Systems Inc.

10:15

Novel Designs of Turbine Blades for Ad-ditive Manufacturing GT2016-56084 Liubov Magerramova, Boris Vasilyev, Cen-

tral Institute of Aviation Motors, Moscow, Russia, Vladimir Kinzburskiy, Central Insti-tute of Avation Motors, Moscow, Russia

Film Cooling Investigation of a Slot-Based Diffusion Hole GT2016-56175 Baitao An, Institute of Engineering Thermophys-

ics, Chinese Academy of Sciences, Beijing, China, Jian-Jun Liu, Institute of Engineering Thermo-physics, Beijing, China, Sijing Zhou, Xiaodong Zhang, Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing, China, Chao Zhang, School of Automation, Tianjin University of Technology, Tianjin, China

Operability Limits of Tubular Injectors With Vortex Generators for a Hydrogen Fuelled Recuperated 100kW Class Gas Tur-bine GT2016-56381 Stefan Bauer, Balbina Hampel, Technische Uni-

versität München, Garching, Germany, Thomas Sattelmayer, Technical Univ Munich, Garching, Germany

10:4

5

Structural Deflection's Impact in Tur-bine Stator Well Heat Transfer GT2016-56428 Julien Pohl, University of Leeds, Leeds, United

Kingdom, Antonio Guijarro Valencia, ETSIA Universidad Politécnica de Madrid, Madrid, Spain, Vincenzo Fico, Gary A. Clayton, Rolls-Royce plc, Derby, United Kingdom, Harvey Thompson, University of Leeds, Leeds, United Kingdom, Gregorio Lopez Juste, ETSIA Uni-versidad Politecnica de Madrid, Madrid, Spain

Experimental Study on the Film Cooling Characteristics of the Cylindrical Holes Embedded in Sine-Wave Shaped Trench GT2016-56856 Jiansheng Wei, Hui-ren Zhu, Cunliang Liu, Hui

Song, Cong Liu, Northwestern Polytechnical Uni-versity, Xi’an, China, Tong Meng, Northwestern Polytechnical University, Xi’an Shaanxi, China

Combustion Characteristics of a Micro Gas Turbine Combustor With Gamma-Shaped Porous Media Dome GT2016-56941 Liang Zhang, chi zhang, Xin Xue, Peihua Lin, Yu-

zhen Lin, Beihang University, Beijing, China

11:15

Gas Turbine Shutdown Thermal Analy-sis and Results Compared With Experi-mental Data GT2016-56601 Vishnu Vardhan Reddy, General Electric,

BANGALORE, Karnataka, India, Kathiravan Selvam, GE Oil & Gas, Bangalore, India, Ro-berto De Prosperis, GE Oil & Gas, Firenze, Italy

Heat Transfer Coefficients and Film Cool-ing Effectiveness of Transonic Turbine Vane Suction Surface Using TSP Technique GT2016-56264 Chao-Cheng Shiau, Nafiz H. K. Chowdhury,

Shang-Feng Yang, Texas A&M University, Col-lege Station, TX, United States, JC Han, Texas A & M University, College Station, TX, United States, Alexander Mirzamoghadam, Honeywell Interna-tional, Phoenix, AZ, United States, Ardeshir Riahi, Honeywell, Scottsdale, AZ, United States

Experimental Investigation of Convergent and Convergent-Divergent Micro Swirling Flame Behavior and Stabilization GT2016-56944 Xintong Zhang, Yuzhen Lin, Xin Xue, Liang

Zhang, chi zhang, Beihang University, Beijing, China

11:4

5

Experimental Observations Of Thermal Bow Due To Natural Convection On A Gas Turbine Compressor Rotor Shaft Analogue GT2016-56800 E.O. Smith, University of New South Wales /

RAAF, Campbell, ACT, Australia, A.J. Neely, A.P. Butcher, University of New South Wales, Canberra, ACT, Australia

Combined Effects of Freestream Pressure Gradient and Density Ratio on the Film Cooling Effectiveness of Round and Shaped Holes on a Flat Plate GT2016-56210 Kyle Vinton, Travis Watson, Lesley Wright,

Baylor University, Waco, TX, United States, Dan Crites, Mark Morris, Honeywell Aerospace, Phoe-nix, AZ, United States, Ardeshir Riahi, Honeywell, Scottsdale, AZ, United States

Micro Gas Turbine Firing Ammonia GT2016-56954 Norihiko Iki, AIST, Tsukuba, Ibaraki, Japan,

Osamu Kurata, Advanced Industrial Science and Technolo, Ibaraki, OTHER, Japan, Takayu-ki Matsunuma, Nat’l Inst. Of Adv Ind, Ibaraki, Japan, Takahiro Inoue, National Institute of Advanced Industrial Science, Tsukuba, Ibara-ki, Japan, Taku Tsujimura, AIST, Koriyama, Fukushima, Japan, Hirohide FURUTANI, Na-tional Institute of Advanced Industrial (AIST), Koriyama, Fukushima, Japan, Hideaki Ko-bayashi, Tohoku Univ, Sendai 980-8577, Miyagi, Japan, Akihiro Hayakawa, Akinori Ichikawa, Institute of Fluid Science,Tohoku University, Sendai, Miyagi, Japan, Yoshiyuki Arakawa, To-hoku university, Aobaku,Sendai,Miyagi, Japan

12:1

5

Experimental and Numerical Investiga-tion of Annular Casing Impingement Ar-rays for Faster Casing Response GT2016-57619 Andrew Dann, Priyanka Dhopade, Marko

Bacic, University of Oxford, Oxford, United Kingdom, Leo Lewis, Rolls-Royce plc, Derby, Derbyshire, United Kingdom, Peter Ireland, Oxford University, Oxford, United Kingdom

Thermal Field Measurements for a Shaped Hole at Low and High Freestream Turbu-lence Intensity GT2016-56967 Robert Schroeder, Sargent & Lundy, Wheaton, IL,

United States, Karen Thole, Pennsylvania State Univ, University Park, PA, United States

142 | ASME 2016 TURBO EXPO

FRIDAY, JUNE 17 10:15AM - 12:45 PM

OIL & GAS APPLICATIONS STEAM TURBINES STEAM TURBINES

Basics of Rotordynamics Instrumentation & Data

AcquisitionLP Steam Turbine Exhausts HP/IP Turbines Blades and Rotor

Tutorial Session • Room E6 • FB-24-15 Paper Session • Room 308A • FB-26-5 Paper Session • Room E2 • FB-26-10

Session Chair: Meera Day, Southwest Re-search Institute

Session Chair: Simon Hogg, School of Engi-neeringSession Co-Chair: Hiteshkumar Mistry, GE Global Research

Session Chair: Manuel Ettler, Siemens AGSession Co-Chair: Manfred Wirsum, Rwth-Aachen University

10:15

Numerical Analysis of the Swirl Flows in the Low Pressure Steam Turbine Exhaust Hood and Optimization GT2016-56063 Mingyan Yin, Chen Yang, Xi’an Jiaotong Univer-

sity, Xi’an, Shaanxi, China, Liu Meng, Wei Yan, Zhong Zhuhai, Dongfang Turbine Co., Ltd., Dey-ang, Sichuan, China, Jun Li, Institute of Turboma-chinery, Xi’an Jiaotong Univ., Xi’an, Shaanxi, China, Zhenping Feng, Xi’an Jiaotong University, Shaanxi, Shaanxi, China

Measured and Numerical Vibration Char-acteristics of Reliable 3D Designed Effi-cient IP Blades With a Wide Range of Op-erational Speed GT2016-57374 Matthias Strauch, Siemens AG, Goerlitz, Germa-

ny, Wolfgang Beer, Siemens, Nuremberg, Germa-ny, Ingo Stephan, Siemens AG, Görlitz, Germany

10:4

5

Parametric Experimental and Numerical Study of LP Diffuser and Exhaust Hoods GT2016-56640 Derek Taylor, GE Power, Rugby, Warwickshire,

United Kingdom, Gurnam Singh, GE Power, Rug-by, Warwickshire, United Kingdom, Phil Hemsley, Martin Claridge, GE Power, Rugby, Warwick-shire, United Kingdom

Optimization of a Steam Turbine Blade’s Double-T Root through Contact Surface Convexity GT2016-56136 Johanna Ehlers, Technische Universitaet

Muenchen, Muenchen, Bayern, Germany, Hen-ning Ressing, Wulf-Christof von Karstedt, MAN Diesel & Turbo, Hamburg, Germany, Daniel Rix-en, Technische Universitaet Muenchen, Garch-ing, Germany, Mohamed S. Gadala, Univ Of Brit-ish Columbia, Vancouver, BC, Canada

11:15

Performance Prediction and Optimisation of LP Steam Turbine Radial Diffuser at Design and Off-Design Conditions Using Streamline Curvature Method GT2016-56974 Luying Zhang, GE power, Rugby, Warwickshire,

United Kingdom, Francesco Congiu, GE Power, Baden, Switzerland, Xiao-Peng Gan, GE Power, Rugby, Warwickshire, United Kingdom, David Karunakara, Infosys, Mysore, India

New HP-/IP-Blades With Protective Coat-ing for High Temperature Steam Applica-tion GT2016-57204 Manuel Ettler, Siemens AG, Muelheim an der

Ruhr, NRW, Germany, Armin Delazzer, Siemens - Power and Gas Division, Mülhein, Germany, Albert Schrey, Joerg Schuerhoff, Siemens AG, Muelheim an der Ruhr, NRW, Germany

11:4

5

Low Pressure Steam Turbine Exhaust Flow: Part 1 CFD Coupling of LP Turbine and Con-denser Neck GT2016-57149 Peter Stein, Dirk Telschow, GE Power, Baden,

Switzerland, Frederic Lamarque, GE Power, Le-vallois-Perret, France, Nuncio Colitto, General Electric Steam Power Systems, Cravanche, France

Steam Turbine Rotor Transient Ther-mo-Structural Analysis and Lifetime Pre-diction GT2016-57652 Leonid Moroz, Boris Frolov, Roman Kochurov,

Softinway Inc., Burlington, MA, United States

12:1

5

Low Pressure Steam Turbine Exhaust Flow: Part 2 Investigation of the Condenser Neck Flow Field and 1D Modelling GT2016-57161 Dirk Telschow, Peter Stein, Hartwig Wolf, Ales-

sandro Sgambati, GE Power, Baden, Switzerland

The Role of Advanced Fracture Mechanics Evaluation Methods for Turbine Compo-nents GT2016-57339 Henning Almstedt, Siemens AG, Muelheim An

Der Ruhr, Germany, Torsten-Ulf Kern, Siemens AG, Energy Sector, Muelheim, Germany, Michael Loehr, Siemens, Muelheim an der Ruhr, Germany, David Segletes, Siemens Energy Inc, Charlotte, NC, United States

T

U

T

O

R

I

A

L

FINAL PROGRAM | 143

FRIDAY, JUNE 17 10:15AM - 12:45 PM

STRUCTURES & DYNAMICS: PROBABILISTIC METHODS

STRUCTURES & DYNAMICS: AERODYNAMIC EXCITATION &

DAMPING

TURBOMACHINERY: AXIAL FLOW FAN & COMPRESSOR

AERODYNAMICS

Probabilistic Method Application

Turbomachine Aeroelasticity and Computational Methods 4 Advanced Measurements

Paper Session • Room 300 • FB-29-1 Paper Session • Room 307C • FB-34-4 Paper Session • Room 318C • FB-37-4

Session Chair: Liping Wang, GE Corpo-rate Res & Develop,Session Co-Chair: Michael Gorelik, FAA

Session Chair: Sun Xiaofeng, Beijing Univer-sity of Aeronautics and AstronauticsSession Co-Chair: Toshinori Watanabe, Uni-versity of Tokyo

Session Chair: Eberhard Nicke, DLRSession Co-Chair: Roland Matzgeller, MTU Aero Engines AG

10:15

Random Vibration Analysis for Cen-trifugal Compressor Impellers with Un-steady Aerodynamic Excitations GT2016-56419 Yuefang Wang, Yan Liu, Dalian University

of Technology, Dalian, China, Xuejun Wang, Shenyang Blower Works Group Co. Ltd, Shen-yang, China, Hongkun Li, Dalian University, Dalian P. R., China, Daren Jiang, Shenyang Blower Workshop, Shenyang, China

On the Interaction of Multiple Traveling Wave Modes in the Flutter Vibrations of Friction-Damped Tuned Bladed Disks GT2016-56126 Malte Krack, University of Stuttgart, Stuttgart,

Germany, Lars Panning-von Scheidt, Joerg Wal-laschek, Institute of Dynamics and Vibration Re-search, Leibniz Universität Hannover, Hannover, Germany

Detecting Transition in Flat Plate Flow with Laser Interferometric Vibrometry (LIV) GT2016-56043 Pascal Bader, Wolfgang Sanz, Johannes Pe-

terleithner, Jakob Woisetschlaeger, Franz Heitmeir, Graz University of Technology, Graz, Austria, Walter Meile, Guenter Brenn, Institute of Fluid Mechanics and Heat Transfer, Graz Uni-versity of Technology, Graz, Austria

10:4

5

Micromechanics-Based Fracture Risk Assessment Using Integrated Probabi-listic Damage Tolerance Analysis and Manufacturing Process Models GT2016-58089 Michael Enright, R. Craig McClung, Kwai Chan,

Southwest Research Inst, San Antonio, TX, Unit-ed States, John McFarland, Jonathan Moody, Southwest Research Institute, San Antonio, TX, United States, James Sobotka, Southwest Re-search Inst, San Antonio, TX, United States

Numerical Investigation of Tip Clearance Flow Induced Flutter in an Axial Research Compressor GT2016-56956 Daniel Möller, Maximilian Jüngst, Felix Holzing-

er, Technische Universität Darmstadt, Darmstadt, Germany, Christoph Brandstetter, Technische Universitat, Darmstadt, Germany, Heinz-Peter Schiffer, Technische Universität Darmstadt, Darmstadt, Hessen, Germany, Sebastian Leicht-fuss, Turboscience, Darmstadt, Germany

Powerful Interpolation Method Demonstrated on Experimental Data From Fast Response Pres-sure Transducers in a Turbofan Engine GT2016-56469 Felix Kern, Stefan Bindl, University of the German

Federal Armed Forces, Neubiberg, Germany, Marcel Stoessel, Federal Armed Forces, WTD 61, Manching, Germany, Svenja Aberle, University of the German Federal Armed Forces, Neubiberg, Germany, Rein-hard Niehuis, University of the German Armed Forc-es Munich, Neubiberg, Bavaria, Germany

11:1

5

Optimal Automated Fracture Risk As-sessment of 3D Gas Turbine Engine Com-ponents GT2016-58091 Michael Enright, Southwest Research Inst,

San Antonio, TX, United States, Jonathan Moody, Southwest Research Institute, San Antonio, TX, United States, James Sobotka, Southwest Research Inst, San Antonio, TX, United States

Numerical Investigation of Tip Clearance Flow Induced Flutter in an Axial Research Compressor GT2016-56956 Daniel Möller, Maximilian Jüngst, Felix Holzing-

er, Technische Universität Darmstadt, Darmstadt, Germany, Christoph Brandstetter, Technische Universitat, Darmstadt, Germany, Heinz-Peter Schiffer, Technische Universität Darmstadt, Darmstadt, Hessen, Germany, Sebastian Leicht-fuss, Turboscience, Darmstadt, Germany

Experimental and Numerical Flow Anal-ysis of Low-Speed Fans at Highly Loaded Windmilling Conditions GT2016-56577 Aurélie Ortolan, SAFRAN Technofan, Blagnac,

France, Suk-Kee Courty-Audren, Nicolas Binder, Institut Supérieur de l’Aéronautique et de l’Es-pace (ISAE), Toulouse, France, Xavier Carbon-neau, ISAE, Toulouse, France, Florent Challas, SAFRAN Technofan, Blagnac, France

11:4

5

COMPARISON OF TWO METHODS FOR SENSITIVITY ANALYSIS OF COMPRES-SOR BLADES GT2016-57378 Robin Schmidt, TU Dresden, Dresden, Germa-

ny, Marcus Meyer, Rolls-Royce Deutschland, Blankenfelde-Mahlow, Germany, Matthias Voigt, TU Dresden, Dresden, Germany, Kon-rad Vogeler, Technische Universität Dresden, Dresden, Germany

The Low Reduced Frequency Limit of Vi-brating Airfoils: Part III B Numerical Quantification and Influence of Unsteady Loading GT2016-57288 Almudena Vega, Universidad Politecnica De Ma-

drid, Madrid, Spain, Roque Corral, ITP, Alcoben-das (Madrid), Spain

Pressure Field Measurement on Compres-sor Cascade Using Pressure-Sensitive Paint GT2016-57082 Limin Gao, Xiaoquan Hu, Linchuan Tian, Ruiyu

Li, Northwestern Polytechnical University, Xi’an China, China

12:15

Creep Life Assessment of an Uncooled Turbine Blade Using Probabilistic De-sign GT2016-56660 Bjorn Sjodin, Siemens Industrial Turboma-

chinery AB, FINSPONG, Sweden

Comparison Between Weak and Strong Coupling Modeling for Aeroelastic Stabili-ty of a Simple Sealing Device GT2016-57752 Nicolas de Cacqueray, Snecma, Réau, France,

Martin Seive, Alain Kernilis, Snecma, Vernon, France

Leveraging Correlation to Reduce Uncer-tainty in Efficiency Measurements for Low Pressure Ratio Fans GT2016-57718 Anthony Ferrar, University of Florida, Gaines-

ville, FL, United States, William C. Schneck, III, Virginia Polytechnic Institute and State Uni-versity, Blacksburg, VA, United States, Walter O’Brien, Virginia Tech University, Blacksburg, VA, United States

144 | ASME 2016 TURBO EXPO

FRIDAY, JUNE 17 10:15AM - 12:45 PM

TURBOMACHINERY: AXIAL FLOW TURBINE

AERODYNAMICS

TURBOMACHINERY: NOISE & INNOVATIVE NOISE

REDUCTION (WITH AIRCRAFT ENGINE)

TURBOMACHINERY: RADIAL TURBOMACHINERY

AERODYNAMICS

Low Pressure Turbine Aerodynamics III

Ducts and Noise Propagation, Jet Acoustics

Radial Compressors - Performance & Manufacturing

Aspects

Paper Session • Room 327 • FB-38-17 Paper Session • Room E1 • FB-41-3 Paper Session • Room E5 • FB-42-2

Session Chair: Reinaldo Araujo Gomes, University of the Federal Armed Forces MunichSession Co-Chair: Christian Wakelam, GE Global Research

Session Chair: Alessandro Corsini, Sapienza University of RomeSession Co-Chair: Alessio Castorrini, Sapi-enza University of Rome

Session Chair: Daniel Rusch, ABB Turbo Systems Ltd.Session Co-Chair: Satoshi Ohuchida, IHI Corporation

10:15

Influence of the Coriolis Force on the Flow in a Low Pressure Turbine Cascade T106 GT2016-57399 Oliver Baum, Technische Universität Dresden,

Dresden, Germany, Denis Koschichow, Tech-nische Universitat Dresden, Dresden, Germa-ny, Jochen Fröhlich, Technische Universität Dresden, Dresden, Germany

Predictive LES for Jet Aeroacoustics: Cur-rent Approach and Industrial Application GT2016-56673 James Tyacke, Iftekhar Naqavi, Zhong-Nan

Wang, Paul G. Tucker, University of Cambridge, Cambridge, United Kingdom, Peer Boehning, Rolls-Royce Germany, Berlin, Germany

Numerical Study of the Reynolds Number Effect on the Centrifugal Compressor Per-formance and Losses GT2016-56036 Jonna Tiainen, Ahti Jaatinen-Värri, Aki Grön-

man, Jari Backman, Lappeenranta University of Technology, Lappeenranta, Finland

10:4

5

Experimental Investigation of Pressure Side Flow Separation on the T106C Air-foil at High Suction Side Incidence Flow GT2016-56287 Stephan Stotz, University of the Federal

Armed Forces Munich, München, Germany, Yavuz Guendogdu, MTU, Munich, Germany, Reinhard Niehuis, University of the German Armed Forces Munich, Neubiberg, Bavaria, Germany

Investigations on Direct and Hybrid Sound Predictions GT2016-57612 Christofer Kendall-Torry, Florian Danner, Tech-

nical University of Munich, Garching, Bavaria, Germany

Numerical and Experimental Investiga-tion of Heat Transfer in a Low Flow Single Stage Centrifugal Compressor GT2016-57710 Michael Cui, William Hohlweg, Elliott Group,

Jeannette, PA, United States

11:15

Experimental Investigation on the Time-Space Evolution of a Laminar Sep-aration Bubble by POD and DMD GT2016-57581 Davide Lengani, Università degli Studi di

Genova, Genoa, Italy, Daniele Simoni, Univer-sity of Genova, Genova, Italy, Marina Ubaldi, Pietro Zunino, Università di Genova, Genova, Italy, Francesco Bertini, GE Avio, Torino, Italy

An Acoustic Excitation System for the Gen-eration of Turbomachinery Specific Sound Fields: Part I Design and Methodology GT2016-56020 Akif Mumcu, Christian Keller, Carolin Mandan-

na Hurfar, Leibniz Universität Hannover, Han-nover, Germany, Joerg Seume, Gottfried Wilhelm Leibniz Universitaet, Hannover, Germany

The Development of a Low Specific Speed Centrifugal Compressor Research Facility GT2016-56683 Jeanne Methel, William J. Gooding, John Fabi-

an, Nicole Key, Purdue University, West Lafay-ette, IN, United States, Mark Whitlock, Rolls-Royce MC SB-06, Indianapolis, IN, United States

11:4

5

Reynolds Stress Anisotropy in a Two-Stage Low Pressure Axial Turbine at Low Reynolds Numbers GT2016-56133 Jan Habermann, Stephan Staudacher, Mar-

tin G. Rose, Martin C. Arenz, Yavuz Guendog-du, Irene Raab

An Acoustic Excitation System for the Gen-eration of Turbomachinery Specific Sound Fields Part II: Experimental Verification GT2016-56969 Carolin Mandanna Hurfar, Christian Keller,

Akif Mumcu, Leibniz Universität Hannover, Han-nover, Germany, Joerg Seume, Gottfried Wilhelm Leibniz Universitaet, Hannover, Germany

Development of a Centrifugal Compressor Facility for Performance and Aeromechan-ics Research GT2016-56188 Fangyuan Lou, Herbert Harrison, John Fabian,

Nicole Key, Purdue University, West Lafayette, IN, United States, Darrell James, Honeywell Inc, Phoenix, AZ, United States, Rakesh Srivastava, Honeywell International, Pheonix, AZ, United States

12:1

5

Influence of Inflow Turbulence and Dis-tortion on a Two-Stage Low Pressure Axial Turbine at Low Reynolds Num-bers GT2016-56134 Christian H. Schulze, Stephan Staudacher,

Martin G. Rose, Jan Habermann, Udo Freygang

LES Predictions of Jet Noise for a Py-lon-Mounted Dual Stream Nozzle and Jet Surface Interactions GT2016-58175 Patrick Vogel, JongHoon Bin, CRAFT Tech, Pip-

ersville, PA, United States, Neerajj Sinha, Com-bustion Research & Flow Technology, Inc. (CRAFT Tech), Pipersville, PA, United States

Manufacturing Considerations in the Ini-tial Design Process GT2016-57801 Mark Anderson, Concepts NREC, Norwich, VT,

United States, Peter Klein, Concepts NREC, Chelmsford, MA, United States

FINAL PROGRAM | 145

FRIDAY, JUNE 17 10:15AM - 12:45 PM

TURBOMACHINERY: UNSTEADY FLOWS IN

TURBOMACHINERYWIND ENERGY COAL, BIOMASS &

ALTERNATIVE FUELS

Unsteady Flows in Turbines I Small Wind Turbine Blade Aerodynamics

Basics of Alternative Fuel Combustion and Emissions

Paper Session • Room 403 • FB-44-1 Paper Session • Room 318B • FB-46-4 Tutorial Session • Room 402 •FB-3-6

Session Chair: Franz Malzacher, MTUSession Co-Chair: Emil Göttlich, Graz University of Technology

Session Chair: Alessandro Bianchini, Univ of FlorenceSession Co-Chair: Juan Jauregui, University of Queretaro

Session Chair: Jeffrey Bergthorson, McGill UniversitySession Co-Chair: Gilles Bourque, Siemens Canada Limited

10:15

Development and Application of a Fast-Response Total Temperature Probe for Turbomachinery GT2016-56132 Martin C. Arenz, Björn Weigel, Jan Haber-

mann, Stephan Staudacher, Martin G. Rose, Ewald Lutum, Wolfgang Berns,

sHAWT Design: Airfoil Aerodynamics Un-der the Influence of Roughness GT2016-56377 David Holst, H.F.I. TU Berlin, Berlin, Germany,

George Pechlivanoglou, HFI TU Berlin, Berlin, Germany, Christoph Tilman Kohlrausch, Chris-tian Navid Nayeri, H.F.I. TU Berlin, Berlin, Ger-many, Christian Oliver Paschereit, Chair of Fluid Dynamics, Hermann-Föttinger-Institut, TU Berlin, Berlin, Germany

10:4

5

Unsteady Aerodynamics of a Flat Tip and a Winglet Tip in a High-Pressure Turbine GT2016-56845 Kai ZHOU, Chao Zhou, Peking University, Bei-

jing, China

Potential of Retrofit Passive Flow Control for Small Horizontal Axis Wind Turbines GT2016-56679 David Holst, H.F.I. TU Berlin, Berlin, Germany,

George Pechlivanoglou, HFI TU Berlin, Berlin, Germany, Felix Wegner, Christian Navid Nay-eri, H.F.I. TU Berlin, Berlin, Germany, Christian Oliver Paschereit, Chair of Fluid Dynamics, Her-mann-Föttinger-Institut, TU Berlin, Berlin, Ger-many

11:15

Investigation of Unsteady Flow Phe-nomena in First Vane Caused by Com-bustor Flow With Swirl GT2016-57358 Simon Jacobi, Cosimo Maria Mazzoni, Kris-

han Chana, Budimir Rosic, University of Ox-ford, Oxford, United Kingdom

A Preliminary Study of the Blade Erosion for a Wind Turbine Operating in a Dusty Environment GT2016-57010 Aya Diab, Ahmed Hossam El-Din, Faculty of Engi-

neering - Ain Shams University, Cairo, Egypt

11:4

5

Computational Simulation of Deposi-tion in a Cooled High-Pressure Turbine Stage With Hot Streaks GT2016-57815 Robin Prenter, The Ohio State University,

Columbus, OH, United States, Ali Ameri, The Ohio State University, Solon, OH, United States, Jeffrey Bons, Ohio State Univ, Colum-bus, OH, United States

Small Horizontal Axis Wind Turbines: Cur-rent Status and Future Challenges GT2016-57701 Kenneth Van Treuren, Baylor University, Waco,

TX, United States

12:1

5

The Effects of Periodic Wakes on Bound-ary Layer Separation of Low-Pressure Turbine Using Large Eddy Simulation GT2016-57205 Xiaodi Wu, Fu Chen, Harbin Institute of Tech-

nology, Harbin, China, Yunfei Wang, Harbin Institute of Technology, Harbin, Heilongjiang, China

T

U

T

O

R

I

A

L

146 | ASME 2016 TURBO EXPO

FRIDAY, JUNE 17 2:30 - 5:30 PM

AIRCRAFT ENGINE CYCLE INNOVATIONS ELECTRIC POWER WIND ENERGY

Environmental Effects

Cycle Performance Simulation

Power Plant Optimization: Data & Modelling

Condition Monitoring

Paper Session • Room E4 • FC-1-3 Paper Session • Room 317A • FC-6-7 Paper Session • Room 308B • FC-8-9 Tutorial Session, Room 308A,

FC-46-13

Session Chair: Andrew Nix, West Virginia UniversitySession Co-Chair: Yoji Oki-ta, IHI Corporation

Session Chair: Ward De Paepe, Vrije Universiteit BrusselSession Co-Chair: Marina Montero Carrero, Vrije Universiteit Brussel

Session Chair: Seyfettin Can Gülen, Bech-tel

Session Chair: Juan Jauregui, Uni-versity of Queretaro

2:30

Investigation of Hot Film Jet Vortex Effects on Drop-lets Characteristics Over Aero-Engine Inlet Strut GT2016-56582 YUN ZHANG, PENG KE,

CHUNXIN YANG, GUANG-FENG YU, Beihang University, Beijing, Beijing, China

HIGH PRESSURE GAS FIRED IN-TERCOOLED SEMI-CLOSED RECU-PERATED CYCLE GT2016-56176 Hans Wettstein, HEW, CH - 5442 Fislis-

bach, Switzerland

ALGOR Gas Turbine Performance Modu-lar Tool: One Dimensional Turbine Mod-ule Validation GT2016-57631 Stefano Piola, Roberto Canepa, Andrea Luca

Silingardi, Stefano Cecchi, Carlo Carcasci, Edoardo Bolgè

3:00

Analysis of Droplet Im-pingement Characteristics of Aero-Engine Nose Cone With Hot Air Film GT2016-57086 Huiyun Yang, PENG KE,

CHUNXIN YANG, Beihang university, beijing, beijing, China

Adapting the Zero-Emission Graz Cycle for Hydrogen Combustion and Investiga-tion of Its Part Load Behaviour GT2016-57988 Wolfgang Sanz, Martin Braun, Herbert

Jericha, Graz University of Technology, Graz, Austria, Max F. Platzer, AeroHy-dro Research & Technology Associates, Pebble Beach, CA, United States

ALGOR Gas Turbine Performance Mod-ular Tool: Map Based Modules Develop-ment GT2016-57683 Roberto Canepa, Stefano Piola, Marco Pirotta,

Ansaldo Sviluppo Energia, Genova, Italy, Carlo Carcasci, University of Florence, Florence, OTH-ER, Italy, Andrea Luca Silingardi, Ansaldo Svi-luppo Energia, Genoa, Italy, Federico Bonzani, Ansaldo Sviluppo Energia, Genova, Italy

3:30

Comparison of the Sensi-tivity to Foreign Particle Ingestion of the GE-F101 and P/W-F100 Engines to Modern Aircraft Engines GT2016-56052 Christopher Cosher, Michael

Dunn, The Ohio State Univer-sity, Columbus, OH, United States

Thermo-Economic Evaluation of Novel Flexible CAES/CCPP Con-cept GT2016-57254 Stephan Herrmann, Steffen Kahlert,

Manuel Wuerth, THartmut Spliethoff

Identification of Thermodynamic Combined Cycle Design Parameters Using Multi Objective and Multi Variable Optimisation Methodologies to Achieve 65% Combined Cycle Power Plant Net Efficient GT2016-57785 Sevket Baykal, GE Power/Gas Power System/Gas Inte-

grated System Technology, Baden, Switzerland, Peter Rufli, General Electric, Baden, Switzerland, Raffaele BOLLIGER, Francesco Fusaro, Hubert Kujawski, GE Power, Baden, Switzerland

4:00

Preliminary Experimental Investigation of Initial On-set of Sand Deposition in the Turbine Section of Gas Tur-bines GT2016-56059 Andrew Boulanger, Hardik

Patel, Wing-Fai Ng, Srinath Ekkad, William DeShong, John Hutchinson, Weibin Xu

Steady State Performance Simula-tion of Natural Gas Pipeline Driven by Compressor Stations GT2016-56301 Yiguang Li, Cranfield University, Bed-

ford Mk43 0al, United Kingdom, Sulei-man Suleiman, Bait Alaseel for General Trading & Contracting Group, Kuwait, Kuwait

Exergoeconomic Analysis of a Combined Cycle of three levels of pressure GT2016-57872 Edgar Vicente Torres González, Raúl Lugo

Leyte, Helen Lugo-Méndez, Martín Salazar Pereyra, Miguel Toledo Velazquez, Alejandro Torres Aldaco

4:30

Validation and Assessment of the Continuous Random Walk Model for Particle Deposition in Gas Turbine Engines GT2016-57332 Peter Forsyth, Matthew Mc-

Gilvray, Vince Galoul, David Gillespie

Advanced and Transformational Hydro-gen Turbines for Integrated Gasification Combined Cycles GT2016-57723 Walter W. Shelton, U.S. Department of Energy/

NETL, Morgantown, WV, United States, Robin Ames, DoE National Energy Technology Lab, Morgantown, WV, United States, Richard Den-nis, US Dept Of Energy, Morgantown, WV, Unit-ed States, Charles W. White, Noblis, Inc, Falls Church, VA, United States, John E. Plunkett, Noblis Inc., Falls Church, VA, United States, James C., Fisher, U.S. DOE -NETL, Morgantown, WV, United States, Richard P., Dalton, LTI - NETL, Morgantown, WV, United States5:

00

T

U

T

O

R

I

A

L

FINAL PROGRAM | 147

FRIDAY, JUNE 17 2:30 - 5:30 PM

HEAT TRANSFER: NUMERICAL FILM COOLING

HEAT TRANSFER: INTERNAL AIR SYSTEMS & SEALS (WITH

TURBOMACHINERY)

HEAT TRANSFER: EXPERIMENTAL FILM COOLING

Numerical Analysis of Heat Transfer Labyrinth Seals General Film Cooling I

Paper Session • Room 301 • FC-13-6 Paper Session • Room 307A • FC-15-4 Paper Session • Room 307B • FC-19-6

Session Organizer: Bhamidi Prasad, IIT MadrasSession Co-Organizer: Cunliang Liu, Northwestern Polytechnical University

Session Organizer: John Blanton, GE PowerSession Co-Organizer: Jae Su Kwak, Korea Aerospace University

Session Chair: Brett Barker, Rolls-RoyceSession Co-Organizer: Michael Benson, U.S. Military Academy

2:30

Unsteady Adjoint of Pressure Loss for a Fundamental Transonic Turbine Vane GT2016-56689 Chaitanya Talnikar, Qiqi Wang, Massachu-

setts Institute of Technology, Cambridge, MA, United States, Gregory Laskowski, GE Avia-tion, Lynn, MA, United States

Investigation on the Leakage Flow, Windage Heating and Swirl Development of Rotating Lab-yrinth Seal in a Compressor Stator Well” GT2016-56740 Xiaozhi Kong, Gaowen Liu, Yuxin Liu, Qing Feng

Experimental Investigation of Film Cool-ing Effectiveness of a Highly Loaded Tur-bine Blade Under Steady and Periodic Un-steady Flow Conditions GT2016-56701 Ali Nikparto, Texas A&M University, College

Station, TX, United States, Meinhard T. Schobei-ri, Texas A & M University, College Station, TX, United States

3:00

Numerical Simulation on the Perfor-mance of Air-Air Primary Surface Heat Exchanger GT2016-56905 Yinze Liu, Wei Dong, Guilin Lei, Shanghai Jiao

Tong University, Shanghai, Shanghai, China, Xiao Yu, Shenyang Engine Design and Re-search Institute, Shenyang, China

Experimental and Numerical Investigation on Leakage Characteristic of Stepped Lab-yrinth Seal GT2016-56743 Li Zhang, Hui-ren Zhu, Cunliang Liu, Fei Tong,

Northwestern Polytechnical University, Xi’an, Shaanxi, China

Application of Film Cooling to an Un-shrouded HP Turbine Casing GT2016-57387 Matthew Collins, Kamaljit Chana, University of

Oxford, Oxford, United Kingdom, Thomas Povey, Univ Of Oxford, Oxford, United Kingdom

3:30

Detailed Numerical Study of Flow and Vortex Dynamics in Staggered Pin-Fin Arrays Within a Channel GT2016-57968 Karthik Kannan, Mahzad Khoshlessan, Ar-

izona State University, Tempe, AZ, United States, Marcus Herrmann, ASU, Tempe, AZ, United States, Yulia Peet, Arizona State Uni-versity, Tempe, AZ, United States

Effect of Air-Curtains on Labyrinth Seal Performance GT2016-57188 Aakash Rai, Deoras Prabhudharwadkar, Sunil

Murthy, Andrew Giametta, David Johns

Effects of Inlet Swirl on Pressure Side Film Cooling of Neighboring Vane Surface GT2016-57527 Yifei Li, Yang Zhang, Tsinghua University, BEI-

JING, BEIJING, China, Xin Yuan, Tsinghua Uni-versity, Dept. of Thermal Eng., Beijing, China

4:00

Numerical Study on Flow and Heat Transfer of a Cooled First Stage Vane of a Gas Turbine GT2016-57977 Lv Ye, Zhao Liu, Xiangyu Wang, Xi’an Ji-

aotong University, Xi’an, Shaanxi, China, Zhenping Feng, Xi’an Jiaotong University, Shaanxi, Shaanxi, China

Leakage Degradation of Straight Labyrinth Seal due to Wear of Round Tooth Tip and Acute Trapezoidal Rub-Groove GT2016-57928 Yahya Dogu, Mustafa Cem Sertcakan, Koray

Gezer, Mustafa Kocagul, ERCAN ARICAN, Mu-rat Ozmusul

Effects of Inlet Swirl on Suction Side Phan-tom Cooling GT2016-57553 Yang Zhang, Yifei Li, Tsinghua University, BEI-

JING, BEIJING, China, Xin Yuan, Tsinghua Uni-versity, Dept. of Thermal Eng., Beijing, China

4:30

Effect of Surface Roughness on Conju-gate Heat Transfer of a Turbine Vane GT2016-56744 Hongyang Li, Yun Zheng, Beihang University,

Beijing, China

Labyrinth Seal Leakage Degradation due to Various Types of Wear GT2016-57944 Yahya Dogu, Mustafa Cem Sertcakan, Koray

Gezer, Mustafa Kocagul, ERCAN ARICAN Murat Ozmusul

Film Cooling Effectiveness Measurements on Trailing Edge Cutback Surface and Lands Following Novel Cross Corrugated Slot Geometry GT2016-57371 Tsun Holt Wong, University of Oxford, Oxford,

United Kingdom, Peter Ireland, Oxford Universi-ty, Oxford, United Kingdom, Kevin P. Self, Rolls-Royce plc, Bristol, United Kingdom

5:00

Unsteady Effects in the Heat Load Pre-dictions for a Two-Stage Compressor Turbine GT2016-57742 Arman A. Farhanieh, Christoph

Mau, HOSSEIN NADALI NAJAFABADI, Mats Annerfeldt, Matts Karlsson

Influence of Honeycomb Land Geometry on Seal Performance GT2016-57569 Daniel Fraczek, Wlodzimierz Wróblewski,

Krzysztof Bochon, Silesian University of Technol-ogy, Gliwice, Poland

Study of Film Cooling in the Trailing Edge Region of a Turbine Rotor Blade in High Speed Flow Using Pressure Sensitive Paint GT2016-57356 Niharika Gurram, University of Oxford, Oxford,

United Kingdom, Peter Ireland, Oxford University, Oxford, United Kingdom, Tsun Holt Wong, Univer-sity of Oxford, Oxford, United Kingdom, Kevin P. Self, Rolls-Royce plc, Bristol, United Kingdom

148 | ASME 2016 TURBO EXPO

FRIDAY, JUNE 17 2:30 - 5:30 PM

STRUCTURES & DYNAMICS: BEARING & SEAL DYNAMICS

STRUCTURES & DYNAMICS: AERODYNAMIC EXCITATION &

DAMPING

TURBOMACHINERY: AXIAL FLOW TURBINE

AERODYNAMICS

Seals - Modeling & Validation Turbomachine Aerodynamic Interaction and Forced Response 2 Three Dimensional Design

Paper Session • Room 300 • FC-31-9 Paper Session • Room 307C • FC-34-6 Paper Session • Room E1 • FC-38-11

Session Organizer: Mohamed-Amine HASSINI, EDF R&D

Session Chair: Virginie Chenaux, German Aerospace Center (DLR)-AESession Co-Chair: Harald Schoenenborn, MTU Aero Engines AG

Session Chair: Martin G. Rose, Thermo-fluid Mechanics Research Centre (TFMRC), Uni-versity of SussexSession Co-Chair: Carsten Schneider, GE Global Research

2:30

Performance Analysis of Hybrid Brush Pocket Damper Seals Using Computa-tional Fluid Dynamics GT2016-57418 Alexander Pugachev, Clemens Griebel, Tech-

nische Universitaet Muenchen, Garching, Ger-many, Stacie Tibos, GE Power, Rugby, United Kingdom, Bernard Charnley, GE Power, Steam Power Systems, Warwickshire, United Kingdom

Simplified Determination of Aerodynamic Damping for Bladed Rotors. Part 1: Experi-mental Validation at Rest GT2016-56535 Bernd Beirow, Thomas Maywald, Felix Fi-

gaschewsky, Christoph Rocky Heinrich, Arnold Kuehhorn, Thomas Giersch

Efficiency Improvements in an Industrial Steam Turbine Stage: Part 1 GT2016-57138 Srikanth Deshpande, Lund University, Lund,

Sweden, Marcus Thern, Lund University, Faculty of Engineering, Lund, Sweden, Magnus Genrup, Lund University, Lund, Sweden

3:00

CFD Applied for the Identification of Stiffness and Damping Properties for Smooth Annular Turbomachinery Seals in Multiphase Flow GT2016-57905 Andreas Jauernik Voigt, Piero Iucidiani, Ken-

ny Krogh Nielsen, Ilmar Ferreira Santos

Simplified Estimation of Aerodynamic Damping for Bladed Rotors: Part 2 Experi-mental Validation During Operation GT2016-56458 Felix Figaschewsky, Arnold Kuehhorn, Bernd

Beirow, Thomas Giersch, Jens Nipkau, Ferdi-nand Meinl

fficiency Improvements in an Industrial Steam Turbine Stage: Part 2 GT2016-57140 Srikanth Deshpande, Lund University, Lund,

Sweden, Marcus Thern, Lund University, Faculty of Engineering, Lund, Sweden, Magnus Genrup, Lund University, Lund, Sweden

3:30

Gas Dynamic Face Seal Tightness Under Non-Stationary Loading GT2016-56011 Renat Badykov, Alexandr Vinogradov, Sama-

ra State Aerospace University, Samara, Russia

Investigation of Time/Frequency Domain CFD Methods to Predict Turbomachinery Blade Aerodynamic Damping GT2016-57962 Sunil Patil, Laith Zori, Philippe G. Godin, Juan

Carlos Morales, Paul Galpin

Secondary Flow Control in Low Aspect Ra-tio Vanes Using Splitters GT2016-56625 Christopher Clark, Graham Pullan, University

of Cambridge, Cambridge, United Kingdom, Eric Curtis, Whittle Laboratory, Cambridge, United Kingdom, Frederic Goenaga, Rolls-Royce, Bristol, United Kingdom

4:00

“Rotordynamic Computational and Exper-imental Characterization of a Convergent Honeycomb Seal Tested With Negative Pre-Swirl, High Pressure With Static Eccentricity and Angular Misalignment” GT2016-56615 Giuseppe Vannini, GE, ——-, Italy, Carlo Maz-

zali, Statoil ASA, Fornebu, Norway, Harald Underbakke, STATOIL, 4314 Sandnes, Norway

On the Scaling of Aeroelastic Parameters for High Pressure Applications in Centrifu-gal Compressors GT2016-57409 Florian Fruth, RWTH Aachen University, Aachen,

Germany, Holger Franz, MAN Diesel & Turbo SE, Oberhausen, Germany, Peter Franz Jeschke, RWTH Aachen University, Aachen, Germany

Aerodynamic Turbine Design for an Oxy-Fuel Combined Cycle GT2016-56439 Adrian Dahlquist, Siemens AB, Finspang, OTH-

ER, Sweden, Magnus Genrup, Lund University, Lund, Sweden

4:30

Impact Phenomena in a Non-Contacting Mechanical Face Seal GT2016-56774 Phil Varney, Georgia Institute of Technolo-

gy, Atlanta, GA, United States, Itzhak Green, Georgia Inst Of Tech, Atlanta, GA, United States

Aerodynamic Excitation Analysis for Vari-able Tip Gap GT2016-57217 Thomas Hauptmann, Leibniz Universität

Hannover, Hannover, Germany, Joerg Seume, Gottfried Wilhelm Leibniz Universitaet, Han-nover, Germany

Design Optimization of Profiled Endwall With Consideration of Cooling and Rim Seal Flow Effects GT2016-57219 Huimin Tang, AVIC Commercial Aircraft En-

gine Co., LTD, Shanghai, China, Shuaiqiang Liu, Hualing Luo, AVIC COMMERCIAL AIRCRAFT ENGINE CO.,LTD, Shanghai, China

5:00

Response Surface Mapping of Perfor-mance for Helical Groove Seals With In-compressible Flow GT2016-57945 Cori Watson, Alexandrina Untaroiu, Neal R.

Morgan, Hanxiang Jin, Brian Weaver, Hous-ton G. Wood

A New Visualization Method for Harmonic Unsteady Flows in Turbomachinery GT2016-57822 Tobias Gezork, KTH Royal Institute of Technol-

ogy, Stockholm, Sweden, Paul Petrie Repar, KTH Sweden, Stockholm, Sweden, Torsten Fransson, KTH, Heat and Power Technology, Stockholm, Sweden

Aerodynamic Performance of Novel Light-weight Turbine Blade GT2016-56516 Yoji Okita, IHI Corporation, Kanagawa, Japan,

Kozo Nita, IHI Corporation, Nishitama-Gun, To-kyo, Japan, Seiji Kubo, IHI Corporation, Yokoha-ma, Japan

FINAL PROGRAM | 149

FRIDAY, JUNE 17 2:30 - 5:30 PM

TURBOMACHINERY: DESIGN METHODS & CFD MODELING

FOR TURBOMACHINERY

TURBOMACHINERY: UNSTEADY FLOWS IN TURBOMACHINERY

MULTIDISCIPLINARY DESIGN APPROACHES, OPTIMIZATION

& UNCERTAINTY QUANTIFICATION

LES and DNS Compressor and Turbine Applications Unsteady Flows in Turbines II

Surrogate-assisted methods (interpolation/regression,

classification)

Paper Session • Room E5 • FC-39-14 Paper Session • Room 327 • FC-44-2 Paper Session • Room 403 • FC-45-1

Session Chair: Chunill Hah, NASA/GlennSession Co-Chair: Koen HILLEWAERT, Cenaero

Session Chair: Florian Herbst, Gottfried Wil-helm Leibniz UniversitaetSession Co-Chair: Christoph Bode, Tech-nische Universitaet

Session Chair: Christian Voss, Deutsches Zentrum für Luft- und Raumfahrt e.V. (DLR)

2:30

Application of an Overset Grid Method to the Large Eddy Simulation of a High-Speed Multistage Axial Compressor GT2016-56344 Jerome de Laborderie, Florent Duchaine, Ol-

ivier Vermorel, Laurent Gicquel, CERFACS, Toulouse, France, Stephane Moreau, Univer-sity of Sherbrooke, Sherbrooke, QC, Canada

Numerical Study on the Effects of the Up-stream Wake Generator on the Aerodynam-ic Performance of a High-Lift Low Pressure Turbine Blade GT2016-56647 Fabio Bigoni, Stefano Vagnoli, Tom Verstraete,

Tony Arts

Modeling and Simulation of Common Core Gas Turbine Engine Variant Applications GT2016-56394 Jonathan Sands, Rolls-Royce Corporation,

Plainfield, IN, United States, Alexander H. Karl, Rolls-Royce Corporation, Indianapolis, IN, Unit-ed States, Dimitri Mavris, Georgia Institute of Technology, Atlanta, GA, United States

3:00

Evaluation of Centrifugal Compressor Performance Models Using Large Eddy Simulation Data GT2016-57169 Elias Sundström, Bertrand Kerres, KTH Royal

of Technology, Stockholm, Sweden, Mihai Mi-haescu, KTH Royal of Technology, Vallentuna, Sweden

Large-Eddy Simulation of a High-Pressure Turbine Vane With Inlet Turbulence GT2016-56980 Solkeun Jee, Jongwook Joo, Gorazd Medic, Unit-

ed Technologies Research Center, East Hartford, CT, United States

A High-Dimensional Model Representation Guid-ed PSO Methodology With Application on Com-pressor Airfoil Shape Optimization GT2016-56741 Amir Safari, University of Stavanger (UiS),

Stavanger, Norway, Kambiz Hajikolaei, Simon Fraser University, Surrey, BC, Canada, Hirpa Lemu, University of Stavanger, Stavanger, Nor-way, Gary Wang, Simon Fraser University, Sur-rey, BC, Canada\

3:30

Application of High-Resolution Large Eddy Simulation to Simplified Turboma-chinery Flows GT2016-57299 Susumu Teramoto, Univ Of Tokyo, Tokyo 113-

8656, Japan, Takuya Ouchi, IHI Corporation, Nishi-tama, Japan, Hiroki Sanada, The Uni-versity of Tokyo, Tokyo, Japan, Koji Okamoto, University of Tokyo, Chiba, Chiba, Japan

Delayed Detached-Eddy Simulations of a High Pressure Turbine Vane GT2016-56911 Dun Lin, Tsinghua University, Dept. of Thermal

Eng., Beijing, China, Xinrong Su, Tsinghua Uni-versity, Beijing, China, Xin Yuan, Tsinghua Uni-versity, Dept. of Thermal Eng., Beijing, China

ampling Strategies and Metamodeling Techniques For Engineering Design: Com-parison and Application GT2016-57045 Haitao Liu, Shengli Xu, Xiaofang Wang, Dalian

University of technology, Dalian, Not Applicable, China

4:00

Adaptive Mesh Refinement for DDES Simulation on Transonic Compressor Cascade With Unstructured Mesh GT2016-56925 Jinlan Gou, Xinrong Su, Tsinghua University,

Beijing, China, Xin Yuan, Tsinghua University, Dept. of Thermal Eng., Beijing, China

On the Application of a Harmonic Balance Method With a Volume Source Cooling Model to the Simulation of a Film-Cooled Turbine Stage GT2016-57199 Kai Becker, Graham Ashcroft, Weber, Stefan

Rochhausen, Jose Rodriguez, Gregor Schmid

Optimization of reinforcing ribs of a hol-low fan blade using metamodel-based opti-mization algorithm GT2016-57226 Ying Ma, Dalian University of Technology,China,

Dalian, China, Shengli Xu, Haitao Liu, Xiaofang Wang, Dalian University of Technology, Dalian, Liaoning, China

4:30

Wall Modeled LES and Its Impact on Ro-tor/Stator Cavity Unsteady Features GT2016-57244 Thibault BRIDEL-BERTOMEU, Laurent Gic-

quel, Gabriel Staffelbach, CERFACS, TOU-LOUSE, France

An Investigation on Aerodynamics Loss Mechanism of Squealer Tips of a High Pres-sure Turbine Blade Using URANS GT2016-57313 Jinsol JUNG, Okey Kwon, Changmin Son, Pusan

National University, Busan, Korea (Republic)

Efficient Multi-Objective Optimization of Labyrinth Seal Leakage in Steam Turbines Based on Hybrid Surrogate Models GT2016-57457 Kevin Cremanns, Simon Hecker, Dirk Roos, Peter

Dumstorff, Henning Almstedt, Christian Musch,

5:00

Large-Eddy Simulation Investigation of Impact of Roughness on Flow in a Low-Pressure Turbine GT2016-57912 Jongwook Joo, Gorazd Medic, Om Sharma,

United Technologies Research Center, East Hartford, CT, United States

Optimization of Tandem Blade Based on Improved Particle Swarm Algorithm GT2016-56901 song zhaoyun, Northwestern Polytechnical Uni-

versity, Xi’an, China, Bo Liu, Northwestern Poly-technical University, Xi’an Shaanxi, China, Mao xiaochen, Lu xiaofeng, Northwestern Polytech-nical University, Xi’an, China

150 | ASME 2016 TURBO EXPO

Author Index

FC-13-6 A. Farhanieh, AThC-4-27 Abanteriba, SThC-13-2 Abba, LTA-12-1 Abdala, AWA-42-4 Abdallah, SMB-13-1 Abdeh, HThB-2-1 Abdi, FThB-8-8 Abe, MThB-45-7 Abenhaim, AFB-37-4 Aberle, SThA-26-4 Abhari, RThA-3-3 Aboujaib, MMB-4-25 Abou-Taouk, AFA-38-18 Adamczuk, RThA-39-7 Adamczyk, JThA-38-8 Adami, PThB-31-7 Adeniyi, AThC-21-5 Adharapurapu, RTA-28-1 ADJEI, RThB-39-8 Afzal, AWB-32-6 Afzal, MThB-26-9 Afzalifar, AWA-12-2 Agati, GTB-19-2 Aghasi, PWC-32-9 Agrapart, QFB-4-23 Agrawal, ATA-10-1 Aguilar, BThB-11-3 Ahlfeld, RFA-2-2 Ahmad, JWC-22-1 Ahmadi, MTC-4-28 Ahmed, AWC-4-16 Ahmed, ITB-36-4 Ahn, YWC-4-16 Ahrens, DThB-8-8 Ai, TTA-4-14 Aigner, MFA-11-4 Aillaud, PTB-28-2 Akanda, SWB-23-1 Al Jubori, AWA-46-6 Al-Abadi, AWA-24-7 Alas, PTB-20-4 ALBUSAIDI, WWB-23-1 AL-Dadah, RMB-4-12 Aldén, MFA-9-4 Aldi, NWC-42-6 Alescio, GFA-6-5 ALEX SAM, AFB-1-1 Alexander, DWC-1-8 Alexiou, AWC-9-3 Alhajeri, HWB-1-6 Ali, FTB-30-3 Allaire, PFB-1-1 Allan, WMA-5-3 Allen, CFB-4-23 Allen, JThB-15-6 Allison, TMB-26-8 Almstedt, HThC-45-8 Alpman, EFA-19-5 Alqefl, MThA-3-3 Altaher, MTB-25-1 Alves de Moura, AWB-11-2 Amano, RMB-27-2 Ambur, RMB-36-2 Ameli, AFB-44-1 Ameri, AFC-8-9 Ames, RTC-15-2 Amirante, DFB-19-8 An, BWB-44-5 An, GMA-9-2 An, JMA-37-5 An, KWA-10-3 An, YFA-36-6 Ananthasayanam, BTB-20-4 Ancona, MWC-19-1 Anderson, JFB-42-2 Anderson, MWB-4-20 Andersson, NMB-21-1 Andersson, O

ThC-25-3 Andreasen, JThA-16-2 Andrei, LWA-4-22 Andreini, AWC-5-7 Andreoli, VThA-3-3 Andrews, GWC-22-1 Andriets, OThA-20-7 Angello, LFA-4-29 Anisimov, VFC-13-6 Annerfeldt, MWA-29-2 Antoniou, RThB-34-3 Aotsuka, MTC-17-2 Araguas, SFB-23-5 Arakawa, YWB-26-1 Arcangeli, LFB-38-17 Arenz, MWC-1-8 Aretakis, NThA-15-5 Arghir, MMA-4-5 Ariatabar, BFC-15-4 ARICAN, EWC-13-3 Arisi, AMA-39-11 Arkhipova, LMB-32-5 Armand, JTB-16-3 Armellini, AThC-23-3 Armstrong, JWA-29-2 Armstrong, NWC-4-19 Arndt, CWB-26-1 Arnone, AThA-23-2 Arroyo, AWB-32-6 Arteaga, IWA-16-4 Arts, TThC-4-27 Asai, TFB-1-1 Asghar, AThA-39-7 Ashcroft, GTA-23-8 Ashton, ZThC-38-2 Atkin, CTC-15-2 Atkins, NMB-27-2 AUBERT, STB-37-1 Auchoybur, KWC-25-2 aus der Wiesche, SMB-1-14 Avellán, RMB-38-14 Averbach, MMB-4-12 Avgustinovich, VTC-23-7 Avola, CThA-23-2 Axelsson, LMB-23-9 Aymanns, RTA-28-1 Azimov, RWC-39-6 Ba, WWC-44-3 Babak, MThC-17-3 Bacci, TFB-5-1 Bacic, MThB-7-3 Backman, JFB-37-4 Bader, PFC-31-9 Badykov, RThC-44-7 Baek, JMA-32-2 Baek, SWA-12-2 Baek, SWC-5-7 Bagchi, IWC-25-2 Bahr Ennil, AThC-39-9 Baier, DWB-36-1 Baik, YWA-24-7 Bainier, FMA-41-1 Bake, FMA-24-8 Bakken, LWB-15-1 Balasubramanian, JTC-46-2 Balduzzi, FThC-17-3 Balmer, CTB-39-4 Banda, BTC-5-4 Banerjee, AWA-41-2 Banica, MThB-7-3 Banjac, MTA-39-1 Banks, GMA-4-5 Bao, XThA-3-3 Barari, GMB-40-3 Barbarossa, FWB-6-3 Barberis, STB-42-1 Barbieux, VWB-4-11 Barfuß, CThA-12-4 Barigozzi, GThB-15-6 Barnes, C

WC-42-6 Barrera-Medrano, MTB-39-4 Barrier, RFB-15-8 Barringer, MMB-5-8 Bartsch, CTC-4-18 Basso, RWC-32-9 Batailly, ATA-39-1 Bather, SWB-32-6 Battiato, GTC-46-2 Battisti, LTB-39-4 Baturin, OThC-1-5 Bauer, HFB-23-5 Bauer, SFB-38-17 Baum, OThA-4-3 Baust, TTC-15-2 Bavassano, FFC-8-9 Baykal, SWB-15-1 Beard, PThA-4-3 Beaunier, JThC-13-2 Becchi, RMA-24-8 Beck, GTB-28-2 Beck, JMA-37-5 Becker, BFC-44-2 Becker, KThC-4-27 Beckmann, NTB-26-3 Becs, BFB-26-10 Beer, WThC-1-5 Behdinan, KWC-38-1 Behre, SThB-2-1 Behrendt, TFC-34-6 Beirow, BTC-24-1 Belardini, EThA-22-2 Bellamy, NWB-42-3 Bellobuono, ETC-17-2 Bellocci, LTA-1-11 Bellocq, PWB-26-1 Bellucci, JThA-34-2 Beloki, JWB-31-3 Bender, BMA-9-2 Benedek, TFA-42-8 Benichou, ETC-46-2 Benini, EThC-24-2 Bennett, JMA-26-7 Benra, FMA-4-21 Berger, FThC-17-3 Berger, SFA-3-4 Bergthorson, JThB-4-26 Bergthorson, JTA-4-13 Berndt, PTA-4-13 Bernero, SFB-44-1 Berns, WWC-45-6 Berridge, CTA-38-7 Berrino, MThC-1-5 Berten, OTC-17-2 Berthier, SWA-4-22 Bertini, DTA-38-7 Bertini, FWB-4-20 Bertolotto, EMA-24-8 Bertoneri, MWA-32-7 Bestle, DTA-30-4 Betti, DThC-4-24 Bhattacharya, CTB-4-2 Bhayaraju, UWB-39-5 Bi, QMA-5-3 Bianchi, EMB-20-3 Bianchi, MTC-24-1 Bianchini, AFB-15-8 Bianchini, CTC-32-8 Bickerton, RFA-42-8 Bidaut, YWA-3-1 Bidini, GThB-15-6 Bidkar, RWC-32-9 Bielecki, MTA-38-7 Biester, MWC-44-3 Bigoni, FFA-42-8 Biliotti, DThA-22-2 Bin, DFB-41-3 Bin, JMA-21-3 Binder, MFB-37-4 Binder, N

FB-37-4 Bindl, STC-32-8 Bingham, CWC-32-9 Bisagni, CMB-37-2 Bitter, MTA-32-1 Bladh, RThB-39-8 Blanc, FTB-32-3 Blanc, LThA-39-7 Bleh, ATC-4-18 Blümner, RMB-32-5 Bo, STB-4-6 Bobusch, BFC-15-4 Bochon, KWC-4-19 Bockhorn, HMB-37-13 Bode, CFB-41-3 Boehning, PMA-39-11 Bogachev, ATB-19-2 Bogard, DMB-21-1 Bogdanic, LTB-23-6 Bogner, MMA-11-1 Bohn, DFC-8-9 Bolgè, EThC-23-3 Bolin, CFC-8-9 BOLLIGER, RTC-7-1 Bonanni, TTB-39-4 Boniface, JMB-26-8 Bonilla-Blancas, AThA-16-2 Bonini, AThC-17-3 Bonneau, GTA-11-5 Bons, JFC-8-9 Bonzani, FWA-3-1 Booras, GThC-31-6 Borchard, HFA-3-4 Borello, DMB-26-8 Born, DMA-39-11 Bosco, AThA-26-4 Bosdas, ITC-4-28 Bosnoian, JFC-1-3 Boulanger, AFB-4-1 bounaceur, RTA-37-6 Bourassa, CMB-1-14 BOURGOIS, SMA-24-8 Bourn, GFA-3-4 Bourque, GTA-23-8 Boyaci, ATC-23-7 Brace, CWC-38-1 Brachmanski, RWC-31-2 Brady, JWA-6-2 Bram, SMB-20-3 Branchini, LFB-34-4 Brandstetter, CFC-6-7 Braun, MTB-4-2 Braun, STB-3-2 Braun-Unkhoff, MTA-37-6 Breeze-Stringfellow, AFB-37-4 Brenn, GWB-4-17 Brennan, JWC-9-3 Breviario, FThA-15-5 Bricaud, CFC-39-14 BRIDEL-BERTOMEU, TTC-46-2 Brighenti, AMA-26-7 Brillert, DWA-4-22 Briones, AMA-39-11 Bristot, AWC-9-3 Brivio, DMB-21-1 Brodin, HThC-24-2 Brogelli, RTB-28-2 Brown, JWA-32-7 Brown, TTC-37-12 Brück, CThB-7-3 Brun, KFB-6-6 Brunetti, GFA-19-5 Bruschewski, MWB-11-2 Bu, SWB-31-3 Buchhorn, NFA-16-5 Bucknell, ATA-21-2 Buecklers, TMA-11-1 Bühler, PFA-4-9 Bulat, GFA-11-4 Burberi, E

FINAL PROGRAM | 151

Author Index

WC-9-3 Burgmann, SThA-4-3 Burke, ETC-23-7 Burke, RThC-17-3 Burri, DWA-4-22 Burrus, DThC-45-8 Buske, CThA-28-4 Busse, CMB-37-13 Busse, PFB-18-2 Butcher, ATC-13-7 Buzzard, WMB-1-14 Caballero, OTC-31-1 Cable, TMA-21-3 Cabrera, JMA-4-21 Cademartori, RWC-38-1 Cadrecha, DTC-45-2 Cai, YTA-28-1 Cai, ZWC-4-16 Cakmakci, AMB-21-1 Calderon, LTA-10-1 Caloni, SMA-21-3 Calvo, JThA-34-2 Calza, PMB-38-14 Camci, CMA-4-21 Campa, GWB-12-3 Campana, NMB-4-25 Campilongo, SFB-6-6 Camporeale, SWC-4-19 Camporeale, STB-25-1 Campos Rordriguez, CThC-4-24 Camussi, RWC-4-19 Candel, SFC-8-9 Canepa, RMB-30-1 Cangioli, FMB-4-25 Cant, RTB-3-2 Canteenwalla, PTB-30-3 Cao, JFB-1-1 Cao, TTC-5-4 Cao, YThB-34-3 Capece, VWC-1-8 Capitao Patrao, AThB-11-3 Capone, LTC-32-8 Carassale, LWB-1-6 Carbonneau, XFC-8-9 Carcasci, CTC-7-1 Cardillo, LWB-36-1 Carlson, MWB-1-6 Carnevale, MThC-23-3 Carney, MWC-17-1 Carter, AThA-28-4 Carter, BFA-38-18 Casari, NTB-16-3 Casarsa, LThB-34-3 Casartelli, EWC-25-2 Casati, EThB-9-1 Castegnaro, SFA-9-4 Castorrini, ATA-30-4 Catanzaro, MThA-4-3 Caudal, JTC-37-12 Cave, MFC-8-9 Cecchi, SWA-16-4 Cernat, BWB-4-20 Cerutti, MWA-31-11 Cervantes de Gortari, JWB-12-3 Cha, BMB-36-2 Cha, JFB-37-4 Challas, FFB-29-1 Chan, KWA-16-4 Chan, SFB-44-1 Chana, KWC-5-7 Chana, KThC-1-5 Chandra, BWA-16-4 Chang, STB-39-4 Chappati, VThB-45-7 Chaquet, JWA-26-6 Charnley, BThC-23-3 Charron, FFA-6-5 Chasoglou, AThB-46-1 Chatterjee, TMB-30-1 Chatterton, S

TA-23-8 Chatzisavvas, ITB-4-2 Chaussonnet, GTB-19-2 Chavez, KFA-42-8 Checcucci, MMB-4-25 Chechet, IMA-11-1 Chedevergne, FFA-19-5 Chen, AMA-38-4 Chen, CWB-28-3 Chen, CThA-37-11 Chen, FThB-37-10 Chen, HWB-37-7 Chen, HWB-39-5 Chen, HTA-6-1 Chen, JTC-45-2 Chen, JMB-27-2 CHEN, LFB-5-1 Chen, MFA-31-10 Chen, QThA-38-8 Chen, QMB-23-9 Chen, SThA-12-4 Chen, SFA-26-2 Chen, TMB-26-8 Chen, TMA-11-1 Chen, XTC-31-1 Chen, XThC-44-7 chen, XMA-27-1 Chen, YMA-38-4 Chen, YTC-5-4 Chen, YWB-12-3 Chen, YWB-44-5 Chen, ZTC-37-12 Cheng, BThC-45-8 Cheng, HThA-26-4 Cheng, KWB-26-1 Cheon, JTC-15-2 Chew, JMB-45-4 Chi, ZTB-26-3 Chiba, KWA-31-11 Chicurel Uziel, ETB-20-4 Chidambaram, PMB-30-1 Childs, DMB-38-14 Chilla, MThC-4-24 Chiocchini, STB-3-2 Chishty, WThC-38-2 Cho, JWB-36-1 Cho, JMB-36-2 Cho, STC-21-4 Choi, HThB-39-8 Choi, JThB-2-1 Choi, SThC-31-6 Choi, TThC-46-10 Chokani, NFA-19-5 Chowdhury, NTC-1-9 Christie, RFB-15-8 Christophel, JWC-42-6 Christou, GWC-4-19 Chterev, IMA-37-5 Chu, WThC-44-9 Chung, JFA-11-4 Chyu, MThB-11-3 Ciani, AFA-15-7 Cipolla, LMB-4-12 Citeno, JTC-23-7 Clancy, CFB-26-5 Claridge, MFC-38-11 Clark, CThB-34-3 Clark, JFB-15-8 Clark, KFB-18-2 Clayton, GWB-36-1 Clementoni, ETC-1-9 Cloos, FFB-15-8 Clum, CFA-11-4 Cocchi, LMA-27-1 Colantoni, SFB-26-5 Colitto, NMB-4-12 Collin, RFC-19-6 Collins, MThA-1-10 Colonna, PFB-26-5 Congiu, F

WB-31-3 Conti, RWA-6-2 Contino, FTA-4-13 Coogan, SWA-4-22 Cooper, JTC-26-13 Cooper, PTC-23-7 Copeland, CMB-1-14 Coppola, MThC-1-5 Cordes, LTB-37-1 Cornelius, CTB-25-1 Coronado Rodriguez, CMA-11-1 Corral, RTC-7-1 Corsini, AWA-24-7 Cortinovis, AFC-1-3 Cosher, CWB-26-1 Cosi, LTC-4-18 Cosic, BWB-28-3 Costa, AWC-32-9 Costagliola, STB-25-1 Costall, ATC-17-2 Cottin, GMA-4-5 Cottle, AWB-38-6 Coull, JTA-5-6 Courdier, AThC-23-3 Courtois, NFB-37-4 Courty-Audren, SMB-1-14 Cousins, WWB-36-1 Cox, TWC-25-2 Cozzi, FFC-45-1 Cremanns, KWC-19-1 Crites, DThA-6-4 Cuciuc, TThA-6-4 Cuciumita, CThC-44-7 Cui, BThC-38-2 Cui, JFB-42-2 Cui, MFA-34-5 Cuiping, LWB-23-1 Cukurel, BWB-1-6 Culmone, MTC-13-7 Curbelo, AThC-38-2 Curkovic, OTB-23-6 Curtis, EThA-39-7 Cvijetic, GThC-25-3 Czapla, JTC-4-18 Czarske, JTC-15-2 Da Soghe, RTB-3-2 Dagaut, PFC-38-11 Dahlquist, AMB-38-14 Dahlqvist, JThC-44-7 Dakun, SWB-15-1 D'Alessandro, ATB-3-2 Dally, BFC-8-9 Dalton, RThA-22-2 Dan, KMB-30-1 Dang, PTB-26-3 Dankert, MFB-18-2 Dann, AFB-41-3 Danner, FFB-4-1 Dao, HTB-4-2 Dauch, TWA-10-3 Dauptain, ATB-16-3 Davis, ATC-1-9 Davis, RTB-3-2 Davison, CTB-44-4 Dawes, WFA-37-9 Day, IThC-24-2 Day, MFB-34-4 de Cacqueray, NMB-4-25 De Giorgi, MFC-39-14 de Laborderie, JWC-5-7 De Maesschalck, CWB-23-1 De Miranda Ventura, CMA-5-3 de Oliveira, MWA-6-2 De Paepe, WMB-20-3 De Pascale, AFB-18-2 De Prosperis, RTC-31-1 De Santiago, OWC-25-2 De Servi, CThB-19-3 Dees, JMB-37-2 Defoe, J

MB-23-9 Dehner, RTC-23-7 Deichsel, MThC-3-8 Del Turco, PWC-17-1 DeLancey, JFB-26-10 Delazzer, AThB-45-7 Delecourt, AWA-46-6 Delgado, ATC-7-1 Delibra, GTB-38-3 Demolis, JTC-4-28 Demougeot, NThB-31-7 Den, SFA-26-2 Deng, GFB-4-1 Deng, HTC-32-8 DENG, PMB-10-2 DENG, QWC-44-3 Deng, QThB-7-3 Deniz, STC-3-5 Dennis, RFB-4-23 Depperschmidt, DThB-11-3 D'Ercole, MFC-1-3 DeShong, WFC-38-11 Deshpande, SFA-5-10 Desmet, WThC-45-8 Deveci, KTC-31-1 Devitt, DMB-36-2 Dhar, ETA-36-3 Dheeradhada, VFB-18-2 Dhopade, PFA-3-4 Di Carlo, AMA-39-11 di Mare, FWB-1-6 Di Mare, LThC-24-2 Di Pillo, PMB-27-2 Di Sisto, PWA-46-6 Diab, AFA-3-4 Diaz Gomez Maqueo, PWB-12-3 Dickhoff, JMB-45-4 Didenko, RTB-23-6 Diefenthal, MFA-23-4 Diener, OTA-4-14 Dierke, JThB-9-1 Dierks, MTB-3-2 Diévart, PThA-28-4 Dimaggio, DTC-23-7 Dimitriou, PTB-30-3 Dimond, TThA-46-11 Ding, YTC-23-7 Ding, ZFA-5-10 Dinkelacker, FThC-39-9 Diosady, LWB-4-11 Ditaranto, MWC-44-3 Dittmar, MMA-21-3 Döbbeler, BFC-15-4 Dogu, YMA-26-7 Dohmen, HWC-5-7 Doll, UThC-4-24 Domen, SMA-26-7 Domnick, CTB-37-1 Donahoo, EFC-13-6 Dong, WThA-22-2 Dong-ming, XMB-1-14 Donnerhack, SMB-45-4 Doostan, ATC-17-2 Dord, AThA-26-4 Dorey, JFA-2-2 DorMohammadi, SWC-25-2 Dossena, VThB-42-7 Dostal, LWB-36-1 Dostal, VThC-44-7 Dou, HTB-30-3 dousti, SMB-14-2 Downs, JWC-5-7 Dr. Meier, UThC-45-8 Dresbach, CWC-13-3 Drouin, VTA-44-6 DRUZHININ, IMA-11-1 Du, CTB-13-5 DU, KWB-20-5 Du, QMB-38-14 Du, X

152 | ASME 2016 TURBO EXPO

Author Index

TC-37-12 Du, XTC-17-2 Du Toit, BTA-32-1 Duan, YThC-23-3 Dubois, PWA-10-3 Duchaine, FWC-32-9 Duckitt, STA-4-14 Ducruix, SThB-39-8 Dufour, GMB-26-8 Dumstorff, PFC-1-3 Dunn, MMB-23-9 Durali, MWC-4-19 Durox, DFA-26-2 Dyer, PWC-15-3 Ealy, BThC-23-3 Ebrahim, MThB-42-7 Eckert, TFA-6-5 Efstathiadis, TFB-26-10 Ehlers, JMB-4-12 Ehn, ATB-23-6 Ehrhard, JThA-4-7 Eiringhaus, DWC-1-8 Eitelberg, GWC-4-19 Ek, HMA-5-3 Ekinci, SFC-1-3 Ekkad, SWC-9-3 Elasha, FWB-42-3 Elfert, MMA-14-3 El-Gabry, LMB-10-2 El-Jummah, AWB-1-6 Ellbrant, LThA-34-2 Elliott, RTA-10-1 Elliott, TWB-1-6 Elmdahl, DTA-12-1 Elwekeel, FWC-4-19 Emerson, BTA-39-12 Emory, MTB-23-6 Engeda, AMA-39-11 Engel, KWC-21-10 Enright, MMA-32-2 Epureanu, BWA-4-22 Erdmann, TThA-3-3 Erenburg, VWB-4-20 Eriksson, LWA-32-7 Ermakov, AThB-46-1 Ernst, BThA-15-5 Escudero-Olano, MThC-31-6 Esser, PWB-4-17 Estefanos, WMB-21-1 Etter, TFB-26-10 Ettler, MMB-27-2 Evangelisti, SThB-38-15 Evans, KThA-42-9 Everitt, JTA-4-14 Ewert, RFB-42-2 Fabian, JThA-23-2 Fabian, MWB-4-20 Facchini, BThA-23-2 Falaleev, SMA-24-8 Falomi, SMB-26-8 Fan, SFA-26-2 Fan, XMA-11-1 Fan, XWA-3-1 Fantozzi, FThC-44-7 Fanyu, LTC-17-2 Färber, JThB-2-1 Faucett, DMA-41-1 Faustmann, CTA-11-5 Fei, JMB-32-5 Feilong, YTC-17-2 Feist, JWA-41-2 Feld, HMA-18-1 FENG, DThA-37-11 Feng, JWC-15-3 Feng, QMB-10-2 Feng, ZThB-19-3 Fernandez, EMB-27-2 Ferrand, PMB-37-2 Ferrar, AMB-5-8 Ferrara, G

MA-24-8 Ferrara, VMB-5-8 Ferrari, LTA-30-4 Ferraro, RFA-36-6 Fetvedt, JMB-4-25 Ficarella, AThB-15-6 Fico, VMA-39-11 Fiedler, JMA-18-1 Fien, AFC-34-6 Figaschewsky, FTC-46-2 Fintikakis, HMB-5-8 Fioravanti, AWB-32-6 Firrone, CTC-4-18 Fischer, AThB-34-3 Fischer, MWC-9-3 Fischer, TFC-8-9 Fisher, JThA-15-5 Flegler, JWB-36-1 Fleming, DFA-15-7 Fondelli, TFB-6-6 fornarelli, FFA-36-6 Forrest, BMB-1-14 Forsman, SFC-1-3 Forsyth, PFA-9-4 Fortini, AFB-6-6 fortunato, BFB-4-1 Fournet, RThC-38-2 Fowler, AFC-15-4 Fraczek, DThB-15-6 Franceschini, GMA-27-1 Franchini, FTA-38-7 Francioso, LTC-17-2 Frank, DMB-40-3 Franke, MTA-32-1 Fransson, TWC-1-8 Frantzis, CFC-34-6 Franz, HFA-36-6 Freed, DFB-38-17 Freygang, UMB-38-14 Fridh, JThB-9-1 Friedrichs, JWB-31-3 Frilli, AFB-38-17 Fröhlich, JFB-26-10 Frolov, BFC-34-6 Fruth, FMA-27-1 Fu, LWA-38-10 Fu, WFB-4-1 Fu, YMA-38-4 Fu, YThB-19-3 Fu, ZTA-26-11 Fuhrer, CThC-8-6 Fujii, KMA-18-1 Fujii, TThC-44-7 Fujisawa, NThC-4-27 Funke, HTB-16-3 Furlani, LThC-44-7 Furukawa, MTA-26-11 Furusawa, TFB-23-5 FURUTANI, HFC-8-9 Fusaro, FFB-26-10 Gadala, MThB-34-3 Gadda, AThC-17-3 Gadiraju, SWC-25-2 Gaetani, PTB-4-6 Gaissinski, IThC-3-8 Galgani, GFC-1-3 Galoul, VFC-34-6 Galpin, PWC-9-3 Gamil, AThB-37-10 Gan, JFB-26-5 Gan, XThC-4-24 Gangopadhyay, TThB-15-6 Ganin, LFA-15-7 Ganine, VWB-15-1 Gao, FTB-28-2 Gao, JWA-38-10 Gao, JFB-37-4 Gao, LTC-42-5 Gao, RTB-30-3 Gao, S

TA-11-5 Gao, TTA-4-13 Gao, XThC-17-3 Gao, XThC-39-9 Garai, AThC-24-2 Garcia, DThB-15-6 Garcia, JWB-1-6 García Rosa, NTA-1-11 Garmendia, IThB-45-7 Garnier, FTC-13-7 Garrett, CTC-15-2 Gasnier, TTA-4-13 Gassner, MWB-32-6 Gastaldi, CWB-26-1 Gatti, GTC-39-2 Gaun, LThB-4-26 gauthier, PThA-38-8 Gautier, SWC-4-19 Ge, BThA-38-8 Ge, QWC-32-9 Gebalski, PWC-4-16 Geigle, KThB-34-3 Geist, SMB-4-25 Geng, WFC-38-11 Genrup, MTB-28-2 George, TMB-45-4 Geraci, GWC-17-1 Gerendas, MFC-15-4 Gezer, KFC-34-6 Gezork, TTB-38-3 Ghaffari, PThC-23-3 Ghalamchi, BFA-37-3 Ghazanfari, BWA-46-6 Ghoneim, ZWB-4-17 Ghoniem, AFA-6-5 Ghosh, PThC-4-24 Giacomazzi, EFC-15-4 Giametta, AFB-15-8 Gibson, JFA-11-4 Gicquel, LFC-34-6 Giersch, TThB-9-1 Giesecke, DFC-1-3 Gillespie, DTB-3-2 Ginestra, CWA-6-2 Giorgetti, SWB-38-6 Giovannini, MFA-5-10 Giuliani, FThA-16-2 Giuntini, SFB-4-1 Glaude, PFC-34-6 Godin, PFA-2-2 Godines, CFC-38-11 Goenaga, FThC-17-3 Goevert, SWB-37-7 Goinis, GWB-32-6 Gola, MMB-30-1 Golebiowski, MTA-32-1 Golinval, JTC-39-2 Goller, MThC-17-3 Gomez Ramirez, DFA-2-2 Gonczy, SMB-40-3 Gong, JTC-17-2 Gonzalez, AWC-38-1 Gonzalez, EWC-5-7 GONZALEZ CUADRADO, DThA-38-8 Gonzalez-Martino, IFB-42-2 Gooding, WThC-45-8 Goriachkin, ETB-39-4 Gorshkov, AMA-27-1 Gorte, DTB-4-6 Goss, CTB-4-6 Goss, LFA-37-3 Gostelow, JTB-37-1 Goswami, STB-25-1 Gotelip Correa Veloso, TThC-4-24 Gotoda, HMA-41-1 Göttlich, EFC-39-14 Gou, JTB-4-2 Gounder, JWA-37-8 Gourdain, N

TB-37-1 Govardhan, MMB-21-1 Graichen, AThC-3-8 Grassi, GTB-4-6 Gray, JFC-31-9 Green, IMB-40-3 Green, JWC-13-3 Greiner, NMB-37-2 Greitzer, EThA-15-5 Gresham, TWB-28-3 Greving, DFC-31-9 Griebel, CThC-4-27 Griebel, PWC-31-2 Grieco, JTC-32-8 Griffiths, JThB-9-1 Grilliat, JTA-4-14 Grimm, FThC-8-6 Grimm, FMB-5-8 Grimshaw, STC-4-28 Grohmann, JThB-7-3 Grönman, AThB-7-3 Grönman, KMB-1-14 Grönstedt, TMA-37-5 Grothe, PTA-26-11 Gruebel, MTB-32-3 Gruin, MFA-5-10 Gryllias, KTA-10-1 Gu, CThC-44-9 Gu, CWA-32-7 Guardino, CWC-25-2 Guardone, ATA-38-7 Guendogdu, YTA-4-13 Guethe, FFB-18-2 Guijarro Valencia, AMA-37-5 Guinet, CThB-8-8 Gülen, STA-39-12 Gungor, AMA-18-1 Guo, HMA-18-1 Guo, WWC-39-6 GUOCHEN, ZTA-24-16 Gupta, MFC-19-6 Gurram, NMA-5-3 Gursoy, GThA-28-4 Gustafsson, DTA-32-1 Gutierrez Salas, MTB-19-2 Gutmark, EFA-9-4 Gyuro, MWC-31-2 Ha, KFB-38-17 Habermann, JFA-3-4 Habisreuther, PThB-2-1 Hackemann, STC-32-8 Hackenberg, DFA-4-9 Hackney, RThB-8-8 Hada, SMB-21-1 Haehnle, HWB-11-2 Hagari, TMB-20-3 Haglind, FFA-37-9 Hah, CFC-45-1 Hajikolaei, KMB-23-9 Hajilouy-Benisi, AMB-40-3 Halcoussis, AMB-37-2 Hall, DTB-26-3 Haller, BMB-1-14 Halstead, DTA-21-2 Hamed, AWA-4-33 Hammer, KFB-23-5 Hampel, BTB-4-2 Hamza, MThC-1-5 Hamzehlouia, STC-42-5 Han, GFA-19-5 Han, JWB-4-20 Han, XThB-2-1 Han, ZTC-5-4 Hanachi, HMB-23-9 Hanna, DThB-4-30 Hansford, SThB-42-7 Hardin, JTC-21-4 Hardwick, NThC-1-5 Hargreaves, DMB-4-12 Harper, J

FINAL PROGRAM | 153

Author Index

TC-13-7 Harrington, JFB-42-2 Harrison, HTC-1-9 Hartley, TFA-5-10 Hartmann, UMB-32-5 Hartung, DThA-22-2 Harvey, ATC-4-28 Haseman, JFB-4-23 Hassa, CWC-4-16 Hassanaly, MWC-25-2 Hasselmann, KThC-16-1 Haucke, FMB-37-2 Haug, JFC-34-6 Hauptmann, TMB-26-8 Havakechian, SFB-23-5 Hayakawa, AThC-4-24 Hayashi, KFA-4-9 Hayashi, SWC-19-1 Haydt, SThC-44-9 He, CMA-26-7 he, JWA-26-6 He, KTA-30-4 He, LThA-12-4 He, LTC-42-5 He, XWA-41-2 He, YWC-25-2 Head, ATC-23-7 Heckel, CFC-45-1 Hecker, SMB-45-4 Hedlund, LTC-1-9 Heidebrecht, AMA-37-5 Heinichen, FFC-34-6 Heinrich, CWC-5-7 Heinze, JMB-32-5 Heinze, TTC-4-18 Heitmeir, FThB-42-7 Helm, MWB-4-17 Hemchandra, SFB-26-5 Hemsley, PThC-1-5 Hendrick, PThA-22-2 Hendry, MTA-38-7 Henke, MWA-6-2 Henke, MFA-5-10 Hennecke, CThB-34-3 Hennings, HWA-32-7 Henson, JMB-13-1 Henze, MTB-36-4 Heo, JThA-26-4 Herard, JWA-39-13 Herbst, FWC-4-19 Hermann, JTC-4-28 Hernandez, FFC-13-6 Herrmann, MFC-6-7 Herrmann, SFA-37-3 Hertel, CWA-4-33 Hertweck, MTC-17-2 Herve, RTB-23-6 Heuer, TTC-7-1 Hewkin-Smith, MThC-1-5 Hibberd, SFB-15-8 Hiester, PThB-42-7 Hildebrandt, AFA-23-4 Hildebrandt, TFA-19-5 Hilgert, JTC-15-2 Hills, NThC-34-1 Himeno, TTC-46-2 Himri, AThC-23-3 Hinnant, KFA-4-9 Hiroi, TWC-4-16 Hirsch, CTC-23-7 Hirsch, PMB-45-4 Hjalmarsson, CTA-10-1 Ho, KMB-38-14 Hodson, HMB-21-1 Hoebel, MThC-1-5 Hoefler, CWC-45-6 Hoenen, HThB-2-1 Hoenig, SThA-34-2 Hofer, DThA-4-7 Hoferichter, V

MB-37-13 Hoffmann, JThB-2-1 Hofmann, SWA-26-6 Hogg, SWC-45-6 Högner, LTA-6-1 Hohloch, MFB-42-2 Hohlweg, WMA-5-3 Holcomb, CWB-28-3 Holdsworth, SMB-5-8 Hölle, MThC-13-2 Hollingsworth, KMB-37-2 Holmes, BFB-46-4 Holst, DTB-28-2 Holycross, CFB-34-4 Holzinger, FTC-31-1 Honavara Prasad, STA-28-1 Hong, HTA-30-4 Hong, JWB-4-17 Hong, SFA-36-6 Hooman, KFA-31-10 Hoopes, KTB-23-6 Hopfinger, MThC-4-27 Horikawa, AThA-1-10 Hornung, MWC-45-6 Hösgen, CTC-13-7 Hossain, JFB-46-4 Hossam El-Din, AMB-40-3 Hou, CThC-17-3 Houzeaux, GTC-23-7 Hu, BWB-4-11 Hu, CFA-2-2 Hu, DMB-23-9 Hu, LMB-30-1 Hu, LThC-39-9 Hu, SFB-37-4 Hu, XMA-26-7 Hu, ZFB-4-1 Huang, HMA-4-5 Huang, MTC-39-2 Huang, MTC-42-5 Huang, QFB-1-1 Huang, WTB-44-4 Huang, XFA-36-6 Huang, YMB-36-2 Huang, ZTA-6-1 Huber, AThB-26-9 Hughes, FTB-25-1 Huh, KWB-4-20 Hui, XThB-34-3 Humber, WMA-4-21 Hummel, TTC-42-5 Hunziker, RThA-24-5 huo, CFA-26-2 Huo, WMA-37-5 Hupfer, AFB-41-3 Hurfar, CFC-1-3 Hutchinson, JThC-44-7 Hwang, DMA-27-1 Iaccarino, GWC-42-6 Ibaraki, SFB-23-5 Ichikawa, AThC-44-7 Ikezu, SFB-23-5 Iki, NThB-37-10 Im, HTB-25-1 Imani, SWB-38-6 Infantino, DWB-20-5 Ingistov, SWA-26-6 Ingram, GWB-4-20 Innocenti, AThA-16-2 Innocenti, LFB-23-5 Inoue, TThC-17-3 Insinna, MMA-37-5 Inzenhofer, AThC-1-5 Ippoliti, LFB-5-1 Ireland, PTB-21-8 Irwin, MThC-34-1 Iseni, SWB-11-2 Ishida, KTB-26-3 Ishikawa, YFC-31-9 Iucidiani, P

ThB-8-8 Iwasaki, TTB-26-3 Iwasaki, YThB-7-3 Jaatinen-Värri, AWC-17-1 Jackowski, TFA-38-18 Jacobi, STC-37-12 Jacobs, GTC-31-1 Jacobs, PWB-23-1 Jahn, IFA-3-4 Jakobs, TMB-37-2 Jalaly, RFB-42-2 James, DWB-4-11 Janczewski, JThC-31-6 Jang, KTC-39-2 Janke, CTC-42-5 Japikse, DThB-42-7 Jariwala, VThA-39-7 Jasak, HFC-44-2 Jee, SThB-11-3 Jefferson-Loveday, RThB-4-26 Jella, STB-4-2 Jeng, SFA-42-8 Jenny, PTB-30-3 Jeon, DThC-44-7 jeon, STB-30-3 Jeong, SFC-6-7 Jericha, HMB-5-8 Jeschke, PThB-31-7 Jeung, SThB-15-6 Jha, RThA-38-8 ji, DFA-37-3 Ji, LMA-41-1 Ji, LFA-4-9 Ji, YFB-4-1 Jia, ZWB-42-3 Jiang, CFB-29-1 Jiang, DMB-10-2 Jiang, HThA-28-4 Jiang, JMA-21-3 Jiang, LWC-4-19 Jiang, NThB-4-26 Jiang, XThA-12-4 Jiang, YFC-31-9 Jin, HFB-1-1 Jin, LThB-37-10 JIN, YMB-23-9 Jing, LWC-22-1 Jing, XMB-32-5 Jingyao, DThC-21-5 Jo, CMB-1-14 Johann, ETB-37-1 John, AFC-15-4 Johns, DThC-20-6 Joly, CThB-15-6 Jones, TFB-6-6 Jonshagen, KFC-39-14 Joo, JWC-25-2 Joos, FTA-37-6 Jothiprasad, GThA-4-3 Joumani, YThA-4-3 Jourdaine, PThA-34-2 ju, HMA-27-1 Ju, YWC-45-6 Ju, YMA-18-1 JUN, LMB-32-5 Junfeng, XFC-44-2 JUNG, JWC-42-6 Jung, SFB-34-4 Jüngst, MWB-38-6 Junqiang, ZTB-44-4 Junxu, CThC-4-24 Kabiraj, LWB-23-1 Kadosh, KMB-37-2 Kähler, CFC-6-7 Kahlert, SThA-1-10 Kaiser, SThC-1-5 Kakimpa, BThA-4-7 Kalantari, AWB-6-3 Kalathakis, CFA-6-5 Kalfas, A

ThC-8-6 Kalianpur, VWA-42-4 Kalitzin, GThA-42-9 Kaluza, PWC-9-3 Kameier, FThB-11-3 Kan, RTB-44-4 Kanameda, WMB-1-14 Kando, AThC-21-5 Kaneko, HTB-32-3 Kaneko, YWB-26-1 Kang, CWB-12-3 Kang, JWB-12-3 Kang, YTB-3-2 Kannaiyan, KFC-13-6 Kannan, KMB-40-3 Kannan, KThB-2-1 Kannan, MWB-28-3 Kantzos, PThC-3-8 Kapat, JTB-39-4 Kapil, SMB-45-4 Karelin, DWB-32-6 Kari, LFC-45-1 Karl, AFC-13-6 Karlsson, MThC-4-24 Karmakar, SFB-26-5 Karunakara, DTB-44-4 Kato, DThB-37-10 Katz, JWA-4-33 Kaufmann, JMA-38-4 Kavurmacioglu, LFA-37-3 Kawase, MThC-4-27 Kazari, MThB-34-3 Kazawa, JFC-1-3 KE, PThB-2-1 Kedir, NThC-17-3 Kedukodi, STC-39-2 Kefalas, AThC-4-27 Keinz, JWC-21-10 Kelbassa, IFB-41-3 Keller, CTB-4-2 Keller, MThC-23-3 Kelly, MFB-41-3 Kendall-Torry, CFB-37-4 Kern, FFB-26-10 Kern, TFB-34-4 Kernilis, AFC-39-14 Kerres, BFB-42-2 Key, NMB-37-2 Khaleghi, HTA-1-11 Khalid, SWB-23-1 KHALIL, KWC-4-16 Khandelwal, BWB-32-6 Kharyton, VFC-13-6 Khoshlessan, MWC-38-1 Kibsey, MThA-34-2 Kielb, RThC-44-7 Kim, CWC-31-2 Kim, CMB-20-3 Kim, DThA-23-2 Kim, DThC-21-5 Kim, DWB-44-5 Kim, DFA-43-1 Kim, HTB-20-4 Kim, HWA-39-13 Kim, HThC-38-2 Kim, IWA-39-13 Kim, IFB-6-6 Kim, JMA-27-1 Kim, JTA-23-8 Kim, JTB-30-3 Kim, JThC-38-2 Kim, JThB-39-8 Kim, KWB-44-5 Kim, KWC-31-2 Kim, SFB-6-6 Kim, TWC-31-2 Kim, TFA-43-1 Kim, YWA-46-6 Kim, YWB-15-1 Kim, Y

154 | ASME 2016 TURBO EXPO

Author Index

WC-31-2 Kim, YWB-36-1 King, MTB-4-6 King, RTA-4-14 Kings, NFB-18-2 Kinzburskiy, VWC-44-3 Kirik, ITC-32-8 Kirk, AWC-13-3 Kirollos, BFA-16-5 Kirsch, KWB-4-17 Kirthy, SMB-21-1 Kissel, HMA-4-21 Klarmann, NThA-20-7 Klassen, MThA-39-7 Klaubert, DMB-1-14 Klauke, TThA-20-7 Klein, MFB-42-2 Klein, PTA-4-13 Klein, RMB-40-3 Kleinclaus, CWC-9-3 kleine Sextro, TMB-4-12 Klingmann, JMA-21-3 Klocke, FThC-31-6 Klooster, DTA-38-7 Kluge, TWB-31-3 Kluitenberg, MWC-38-1 Kluxen, RWC-4-16 Knadler, MMA-41-1 Knobloch, KMB-30-1 Knopf, ETC-32-8 Knowles, GFB-23-5 Kobayashi, HFC-15-4 Kocagul, MThA-23-2 Koch, CThB-2-1 Koch, DMA-4-5 Koch, RMB-26-8 Koch, SFB-26-10 Kochurov, RThA-4-7 Köhler, CMB-14-2 Kohli, AFB-46-4 Kohlrausch, CThC-17-3 Kok, JWC-4-16 Kolb, MFA-3-4 Kolb, TWA-32-7 Kolmakova, DWB-11-2 Komiyama, MMA-5-3 Kong, XMA-38-4 Kong, XWC-15-3 Kong, XWC-4-16 Koo, HWA-39-13 Köpplin, VThC-39-9 Kopriva, JFB-4-23 Kornegay, JThA-3-3 Koroglu, BThB-31-7 Korsukova, EFB-38-17 Koschichow, DFA-31-10 Kouda, KThC-17-3 Koupper, CTC-7-1 Koutsomichalis, ATA-23-8 Koutsovasilis, PTC-24-1 Koyyalamudi, VTA-44-6 Kozhemyako, PFA-37-3 Kozulovic, DFB-34-4 Krack, MThA-28-4 Kraemer, KMB-1-14 Kraj, LWC-4-19 Kraus, CTC-23-7 Kraus, MFB-5-1 KRAVCHENKO, IWA-37-8 Krenz, IMB-45-4 Kretinin, GTC-17-2 Krewinkel, RThC-44-9 Kriegseis, JWB-39-5 Krivcov, ATB-42-1 Krivitzky, EThC-4-27 Kroniger, DMB-13-1 Krueckels, JMB-37-13 Krug, AThC-1-5 Krug, MThB-31-7 Kruisbrink, A

WC-39-6 Krumme, AThA-1-10 Krupenich, ITB-32-3 Kubitz, LFC-38-11 Kubo, SWB-42-3 Kuegeler, EMA-27-1 Kuehhorn, AThC-4-27 Kuhn, PFC-8-9 Kujawski, HWB-31-3 Kukla, STC-32-8 Kulesza, ZWB-1-6 Kulkarni, DTC-4-18 Kulkarni, RTB-39-4 Kumar, KMB-36-2 Kumar, PWB-11-2 Kumar, STB-4-2 Kumaran, ATB-39-4 Kumaran, SMB-4-12 Kundu, AFB-23-5 Kurata, OMA-24-8 Kurz, RMA-11-1 Kusterer, KWC-15-3 Kutlu, BThA-1-10 Kuz'michev, VFB-6-6 Kwon, HFC-44-2 Kwon, OMB-1-14 Kyprianidis, KTA-12-1 Lacaze, GWC-17-1 LaChance, JWC-4-19 Laera, DWA-10-3 Lahbib, DMB-4-12 Lal, MThC-4-27 Lam, KFB-26-5 Lamarque, FTB-36-4 Lambruschini, FTB-4-2 Lammel, OFA-34-5 Lampart, PWA-16-4 Lan, YThA-26-4 Lance, MThA-42-9 Landgraf, CThC-23-3 Landry, CMB-13-1 Lange, EMB-37-13 Lange, MMB-4-12 Lantz, AMB-23-9 Lao, DWA-3-1 Laranci, PMB-4-12 Larfeldt, JTA-6-1 Larosa, LThB-42-7 Larosiliere, LFC-13-6 Laskowski, GWA-4-22 Laster, WThA-23-2 LaTray, NTC-17-2 Lauer, MThB-9-1 Laufer, WWC-5-7 Lavagnoli, STC-23-7 Lavertu, TWC-5-7 Lawrence, DWC-38-1 Lazaro, BThB-9-1 Lazzaretto, ATB-38-3 Le Guyader, STC-36-7 Le Pierres, RTB-4-2 Lecourt, RWC-17-1 Ledezma, GThC-44-9 Lee, BWB-36-1 Lee, BMB-4-25 Lee, CTC-4-28 Lee, CThC-13-2 Lee, CWC-31-2 Lee, CThC-25-3 Lee, DWB-36-1 Lee, GMB-36-2 LEE, JThC-3-8 Lee, JWC-4-16 Lee, JWC-31-2 Lee, JWC-44-3 Lee, JThC-34-1 Lee, KWA-39-13 Lee, KMA-27-1 Lee, SWB-12-3 Lee, S

WC-4-19 Lee, TThB-39-8 Lee, WTB-30-3 Lee, YThA-28-4 Lee, YMB-37-13 Leggett, JTA-1-11 Legrand, JWC-32-9 Legrand, MTA-23-8 Lehn, AFC-13-6 Lei, GWC-39-6 LEI, SWC-42-6 Lei, VMB-40-3 Lei, ZFB-34-4 Leichtfuss, SWB-28-3 Leidermark, DTC-45-2 Lejon, MTC-7-1 Lekas, TWB-4-11 Lellek, SFC-45-1 Lemu, HWB-4-20 Lengani, DMB-5-8 Lenzi, GTB-4-2 Leparoux, JMB-38-14 Leroy, GThA-3-3 Levy, YFB-18-2 Lewis, LMB-13-1 Lewis, SThA-26-4 LI, BTC-32-8 LI, CWC-39-6 Li, CMA-41-1 Li, DTC-37-12 Li, DWB-20-5 Li, DThA-26-4 Li, FWB-12-3 Li, GFB-29-1 Li, HFC-13-6 Li, HMB-26-8 Li, HTB-16-3 Li, HThA-3-3 Li, HWC-39-6 Li, HFA-37-3 li, JFB-4-1 Li, JMB-10-2 Li, JTA-11-5 Li, JTB-4-2 Li, JWA-10-3 Li, JThA-24-5 Li, KMA-11-1 Li, LTC-32-8 LI, LThA-37-11 Li, LMB-4-12 Li, MMB-10-2 Li, MThA-26-4 Li, MWC-4-19 Li, MTB-30-3 Li, QFB-37-4 Li, RFB-1-1 Li, STB-42-1 Li, STC-1-9 Li, STC-5-4 Li, SThB-4-26 Li, SThB-4-26 Li, SFA-11-4 Li, WTA-5-6 Li, XTC-45-2 Li, XThC-16-1 Li, XWB-39-5 Li, XWB-39-5 LI, XFC-19-6 Li, YMB-45-4 Li, YTA-5-6 Li, YTB-28-2 Li, YTC-37-12 Li, YTC-39-2 Li, YThB-37-10 Li, YMA-4-5 Li, ZMB-4-12 Li, ZTB-13-5 LI, ZThB-19-3 Li, ZWC-22-1 Liang, C

TA-30-4 Liang, ZThC-13-2 Liberatore, FTB-36-4 Liese, EWC-4-19 Lieuwen, TTC-13-7 Ligrani, PThA-22-2 Lim, SWA-41-2 Limacher, PFC-44-2 Lin, DMA-37-5 Lin, FMA-11-1 Lin, GWA-41-2 Lin, KFB-23-5 Lin, PWB-4-17 Lin, STA-39-12 Lin, XWB-4-20 Lin, YMB-30-1 Ling, JTA-12-1 Ling, JWA-16-4 Liou, TThB-19-3 Little, ZTB-30-3 Liu, BWC-39-6 Liu, BFA-4-29 Liu, CTA-12-1 Liu, CThB-19-3 Liu, CThC-25-3 Liu, CWB-4-11 Liu, CMB-26-8 Liu, FWB-4-11 Liu, FFA-36-6 Liu, GWC-15-3 Liu, GMB-36-2 Liu, HMB-45-4 Liu, HTC-37-12 Liu, HWA-10-3 Liu, HWA-10-3 Liu, HWA-42-4 Liu, HWC-22-1 Liu, HFB-1-1 Liu, JFB-19-8 Liu, JTA-10-1 Liu, JTC-5-4 Liu, JTC-32-8 Liu, JTB-44-4 Liu, KTC-13-7 Liu, KTA-10-1 Liu, LWB-37-7 Liu, LFC-38-11 Liu, SWC-15-3 Liu, STC-45-2 Liu, TWC-4-19 Liu, WMA-41-1 Liu, XMB-37-13 Liu, XTB-28-2 Liu, XFA-4-9 Liu, YFC-13-6 Liu, YMA-26-7 Liu, YMB-23-9 Liu, YMB-32-5 Liu, YTC-5-4 Liu, YTC-5-4 Liu, YThA-16-2 Liu, YThB-4-26 Liu, YWA-16-4 LIU, YWC-15-3 Liu, YFA-11-4 Liu, ZFB-1-1 LIU, ZMB-30-1 Liu, ZThC-38-2 Liu, ZWA-12-2 Liu, ZWA-39-13 Liu, ZWB-39-5 LIU, ZTA-30-4 Livermore-Hardy, RMB-4-25 Ljung, AMB-37-2 Lobo, BFB-5-1 Loboda, IFB-15-8 Lock, GFB-26-10 Loehr, MThC-24-2 Loes, MFA-36-6 Loghin, A

FINAL PROGRAM | 155

Author Index

WA-32-7 Lolis, PFA-37-9 Longley, JFB-18-2 Lopez Juste, GMB-4-25 Lörstad, DFB-42-2 Lou, FThA-28-4 Lourerio Homs, JFA-9-4 Louw, FTC-21-4 Lowden, PTC-37-12 Lu, BWB-1-6 Lu, GTC-3-5 Lu, HMB-37-13 Lu, LTC-23-7 Lu, PWB-37-7 Lu, QTC-42-5 Lu, XWA-3-1 Lu, XTB-44-4 Lu, YThB-37-10 LU, YWB-39-5 Lu, YTB-20-4 Lu, ZWB-11-2 Luan, YMA-23-10 Lubell, DThC-24-2 Lubomirsky, MMB-23-9 Lückmann, DFC-8-9 Lugo Leyte, RMB-26-8 Lugo-Leyte, RFC-8-9 Lugo-Méndez, HMB-1-14 Lundbladh, AThC-24-2 Lunde, EMB-13-1 Lundgreen, RFA-23-4 Lunnan, KFC-38-11 Luo, HTA-39-1 Luo, JTC-13-7 Luo, LWC-38-1 Luo, WFB-44-1 Lutum, EThA-26-4 Lv, KWC-44-3 Lyko, CMB-13-1 Lynch, SMB-45-4 Ma, CTC-37-12 Ma, CTB-13-5 Ma, HWA-38-10 Ma, HMA-37-5 Ma, NThB-39-8 Ma, SMB-37-13 Ma, WWA-16-4 Ma, XFC-45-1 Ma, YThC-8-6 Macdonald, JWB-26-1 Maceli, NTC-1-9 MacManus, DThC-39-9 Madavan, NWA-24-7 Madsen, SFB-18-2 Magerramova, LMB-4-25 Magni, FWA-6-2 Magnusson, JMA-4-21 Magri, LWC-22-1 Mahapatra, RThC-17-3 Mahiques, EMA-5-3 mahmood, MWB-37-7 Mahmood, SWB-23-1 Mahmoud, STA-23-8 Mahner, MThC-34-1 Mailach, RThB-2-1 Maillet, EWC-13-3 Malak, MThC-23-3 Malkamäki, MThB-34-3 Malzacher, LWA-31-11 Mandrup-Poulsen, CThB-34-3 Mangani, LThB-15-6 Mann, AThA-26-4 Mansour, MFA-2-2 Mansour, RThB-34-3 Mantegazza, PTC-15-2 Mantero, MMA-38-4 MARAL, HThA-26-4 Marcelet, MThA-1-10 Marcellan, AWB-38-6 Marconcini, M

ThA-3-3 Marikkar, NMB-26-8 Marinescu, GThC-24-2 Marini, LThA-15-5 Mariot, AMA-21-3 Markovic, ATB-42-1 Marlier, JTC-7-1 Marn, ATA-38-7 Marra, FWC-15-3 Marra, JWB-15-1 Marré Brunenghi, MTC-32-8 Marrè-Brunenghi, MFA-34-5 Martel, CTC-46-2 Marten, DTA-32-1 Mårtensson, HWA-32-7 Martin, IFA-36-6 Martin, SWA-31-11 Martinez Esparza, LTB-25-1 Martinez-Botas, RMA-5-3 Martini, AFB-5-1 Martseniuk, YTB-39-4 Marty, JTC-15-2 Marxen, OThB-8-8 Masada, JThB-9-1 Masi, MTA-6-1 Massardo, AFA-11-4 Massini, DTA-30-4 Massini, MThA-3-3 Masunov, AThB-4-30 Mathews, BWC-1-8 Mathioudakis, KWC-13-3 Mathison, RThA-4-7 Matsumura, YFB-23-5 Matsunuma, TThC-44-7 Matsuoka, AMB-4-25 Matveev, SMB-4-25 Matveev, SWB-39-5 Matveev, VWC-22-1 Matviienko, VThA-39-7 Matzgeller, RFC-13-6 Mau, CTC-13-7 Maurer, MTB-32-3 Maurin, AWC-9-3 Mauß, MFC-45-1 Mavris, DFA-26-2 May Estebaranz, ATB-39-4 Mayandi, BWC-4-19 Mayhew, EWA-16-4 Mayo, IWC-13-3 Mayo, Jr., DFA-34-5 Mayr, MFC-34-6 Maywald, TFC-31-9 Mazzali, CWA-4-22 Mazzei, LMB-27-2 Mazzola, MFB-44-1 Mazzoni, CWB-26-1 Mazzucco, MMB-26-8 Mcbean, IWC-19-1 McClintic, JTA-4-13 McClung, AThA-28-4 McClung, RThA-4-7 McDonell, VFB-29-1 McFarland, JFC-1-3 McGilvray, MFA-36-6 McGroddy, MThA-23-2 McLorn, MThA-15-5 McNally, JWA-4-22 Meadows, JThB-2-1 Mechnich, PFC-39-14 Medic, GTA-4-13 Meeuwissen, TThA-24-5 Meher-Homji, CTC-4-28 Meier, WFB-37-4 Meile, WFC-34-6 Meinl, FWB-31-3 Meli, EMB-20-3 Melino, FFB-15-8 Memory, CFB-26-5 Meng, LMB-21-1 Meng, P

ThB-19-3 Meng, TWB-28-3 Menon, MFB-4-23 Mensah, GWA-24-7 Mercangöz, MFA-9-4 Merlin, MThC-25-3 Meroni, AThC-31-6 Mertz, DThA-3-3 Meskers, DWA-26-6 Messenger, AFB-42-2 Methel, JMB-5-8 Metzler, TFB-29-1 Meyer, MWC-5-7 Meyer, SWC-5-7 Meyer, TThC-38-2 Miao, XThC-34-1 Micallef, DWB-15-1 Michael, MWC-44-3 Michaelis, DMB-37-13 Michelassi, VThC-8-6 Micheli, MTC-15-2 Micio, MWA-21-9 Miglietti, WFC-39-14 Mihaescu, MWB-26-1 Milcak, PWA-41-2 Mileshin, VThB-7-3 Milic, SWC-32-9 Millecamps, AThA-16-2 Miller, ATB-37-1 Miller, RFA-26-2 Millington, PMB-21-1 Mingareev, ITB-39-4 Minot, AThB-4-26 Mira Martinez, DThA-4-3 MIRAT, CTB-25-1 Mirmobin, PFB-19-8 Mirzamoghadam, AWA-42-4 Mishra, SThC-4-24 Misra, AThA-34-2 mitchell, BMA-32-2 Mitra, MTA-26-11 Miyazawa, HFA-36-6 Modir Shanechi, MFB-4-23 Moeck, JMA-4-21 Moeck, JThA-4-7 Mohammadzadeh Keleshtery, PTC-4-28 Mohammed, ATB-20-4 Mohan, AThC-8-6 Mohr, FThA-3-3 Molière, MFB-34-4 Möller, DThA-4-3 Monaghan, RThA-3-3 Monetti, BFA-16-5 Mongillo, DFB-4-1 Montagne, PThB-36-8 Montero Carrero, JWA-6-2 Montero Carrero, MTB-37-1 Montgomery, MThB-11-3 Montomoli, FFA-4-29 Monz, TThA-28-4 Moody, JWC-13-3 Moon, HThB-15-6 Moore, JFA-5-10 Moosbrugger, VThA-38-8 Mora, AFC-34-6 Morales, JFC-39-14 Moreau, SThB-45-7 Moret, MFC-31-9 Morgan, NTB-32-3 Mori, KWA-24-7 Morin, FMA-24-11 Morini, MThB-5-11 Morioka, NThA-24-5 Mormile, MThC-20-6 Moroz, LWC-19-1 Morris, MWB-42-3 Morsbach, CThB-2-1 Morscher, GThC-1-5 Morvan, H

FA-5-10 Moschini, SMB-23-9 Moussavi Torshizi, SThB-45-7 Moustapha, HWB-28-3 Moverare, JMA-24-8 Mrinal, KMB-1-14 Mrugala, TWB-4-11 Mu, YFA-43-1 Mudafort, RThA-28-4 Mueller, FWC-4-16 Mueller, MThC-4-24 Mukhopadhyay, AThC-39-9 Müller, CTB-26-3 Müller, FFA-3-4 Müller, TFB-41-3 Mumcu, ATC-24-1 Munari, ETB-19-2 Munday, DTB-38-3 Munoz, JWC-13-3 Murata, AThC-39-9 Murman, SThC-34-1 Murooka, TThC-4-27 Murota, TFC-15-4 Murthy, SMA-26-7 Musch, CThB-15-6 Musgrove, GWC-9-3 Na, GFC-13-6 Nadali Najafabadi, HThA-23-2 Nagorski, MThC-25-3 Nagy, ATB-21-8 Nagy, DWC-17-1 Nahang-Toudeshki, STC-13-7 Nakamata, CMB-20-3 Nakamura, RThB-2-1 Nakamura, TTA-37-6 Nakano, TFA-4-9 Nakasu, TThC-44-7 Nakayama, KMA-37-5 Nan, XWC-1-8 Nanjundaiah, VWC-1-8 Nanshu, CFB-41-3 Naqavi, IThC-20-6 Nassar, AWC-45-6 Nasuf, AFA-3-4 Natali, STC-17-2 Natsui, GMB-21-1 Navrotsky, VTC-46-2 Nayeri, CMB-4-12 Nazukin, VMA-18-1 Neely, AThC-23-3 Nerg, JMA-41-1 Neuhaus, LMB-38-14 Newman, DTB-25-1 Newton, PThA-6-4 Newton, PWB-38-6 Ng, HFC-1-3 Ng, WWA-37-8 Ngo Boum, GThB-34-3 Ni, MThB-34-3 Ni, RWC-22-1 Ni, YWB-37-7 Nicke, EWC-13-3 Nickol, JWC-13-3 Nicolas, XWA-10-3 Nicoud, FTC-31-1 Nie, CMB-30-1 Niedermeyer, AMB-37-2 Niehuis, RWA-31-11 Nielsen, KTB-6-11 Nikolaidis, TMB-13-1 Nikparto, AWB-37-7 Nili-Ahamadabadi, MMB-4-12 Nilsson, ETC-45-2 Ning, TFC-34-6 Nipkau, JThB-8-8 Nishimura, YFC-38-11 Nita, KThC-16-1 Nitsche, WWB-20-5 Niu, XWC-4-19 Noble, D

156 | ASME 2016 TURBO EXPO

Author Index

WB-31-3 Nocciolini, DThC-4-24 Noiray, NTA-4-14 Noll, BTC-15-2 Noor Mohamed, SFA-37-3 Noorsalehi, MMB-30-1 Norrbin, CThC-45-8 Novikova, YWC-42-6 Numakura, RMB-1-14 Nyatando, DTA-32-1 Nyssen, FFA-37-3 Obaida, HTC-4-18 Oberleithner, KMB-37-2 O'Brien, WWC-22-1 Ocheretianyi, VThB-4-30 O'Connor, JWB-11-2 Oda, YThC-45-8 Odabaee, MThA-28-4 Oechsner, MTA-12-1 Oefelein, JFA-31-10 Ogata, TTA-4-14 Ohno, DTB-44-4 Ohta, YThC-4-27 Okada, KMA-18-1 Okada, MFC-39-14 Okamoto, KThC-4-27 Okazaki, TWC-13-3 Okita, YTC-4-28 O'Loughlin, WThC-44-9 Onori, MThB-34-3 Ooten, MTA-26-11 Ooyama, HTC-23-7 Opferkuch, FMB-20-3 Orlandini, VMB-4-25 Orlov, MMB-45-4 Ornano, FMB-1-14 Ornat, AWA-4-22 Orsino, STC-17-2 Orth, UFB-37-4 Ortolan, AMB-45-4 Otryahina, KMB-37-13 Ottavy, XMA-27-1 Otto, DFC-39-14 Ouchi, TTC-4-28 Oumejjoud, KThA-3-3 Ovcharenko, VThB-15-6 Owen, ATC-15-2 Owen, JMA-18-1 Ozeki, TFC-15-4 Ozmusul, MMA-21-3 Ozturk, UWB-26-1 Pacak, AFA-6-5 Pachidis, VMB-40-3 Page, GThC-4-24 Pagliaroli, TTB-16-3 Pagnacco, FTA-28-1 Pakhomenkov, ATA-5-6 Palazzolo, AThA-24-5 Palella, MThB-31-7 Paleo Cageao, PTB-44-4 Pallot, GThA-28-4 Palmert, FWB-20-5 Pan, XThA-38-8 Pan, YWB-31-3 Panconi, STC-24-1 Pandit, RThC-17-3 Panek, LWC-5-7 Paniagua, GWC-45-6 Panizza, AWA-41-2 Pankov, SMB-32-5 Panning-von Scheidt, LFA-3-4 Pantaleo, AWA-16-4 Pappa, AWB-26-1 Paradiso, BTC-13-7 Parbat, SWA-6-2 Parente, AThC-25-3 Park, BTC-31-1 Park, JThC-44-7 Park, JWC-31-2 Park, J

WC-31-2 Park, MWC-38-1 Parra, JMB-40-3 Parry, AThC-4-27 parsania, NWB-36-1 Pasch, JMA-4-21 Paschereit, CWC-25-2 Passmann, MFA-31-10 Passmore, KThB-45-7 Pastor, GThB-26-9 Patel, GFC-1-3 Patel, HThC-38-2 Patel, KThC-13-2 Patel, RThB-26-9 Patel, YWA-4-22 Patil, SFB-15-8 Patinios, MMA-21-3 Patnaik, PWB-15-1 Patrone, SThC-31-6 Pavelek, DFA-4-29 Paxton, BWB-11-2 Pearce, RMA-46-9 Pechlivanoglou, GFC-13-6 Peet, YThC-16-1 Peitsch, DThB-15-6 Pekris, MTC-24-1 Pelella, MWC-42-6 Pelton, RTC-1-9 Pelz, PTB-4-2 Penanhoat, OTB-25-1 Peng, JMB-30-1 Pennacchi, PMB-13-1 Perdichizzi, AMB-27-2 Pereboom, HMB-20-3 Peretto, AFA-23-4 perrone, AThA-38-8 Persico, GThB-45-7 Persky, RWB-26-1 PERUZZI, LMB-32-5 Pesaresi, LWC-17-1 Peschiulli, ATA-38-7 Pescini, ETB-42-1 Pesiridis, AThB-15-6 Peter, MTA-4-14 Peterleithner, JWB-42-3 Peters, AThA-16-2 Peterson, BThA-6-4 Petit, OTA-26-11 Petrie Repar, PMB-32-5 Petrov, EThB-7-3 Petrovic, MTC-1-9 Pfeiffer, GTB-32-3 Philippe, JMB-38-14 Philit, MTC-3-5 Phillips, JMB-30-1 Phillips, SThB-45-7 Phutthavong, PThC-1-5 Piazera de Carvalho, TThC-23-3 Picard, MTC-17-2 Picchi, AThC-39-9 Pichler, RMB-20-3 Pierobon, LWC-32-9 Pierre, CThB-11-3 Pietropaoli, MTC-17-2 Pilgrim, CTB-20-4 Pilidis, PWA-24-7 Pillay, TWB-26-1 Pinelli, LFA-9-4 Pinelli, MFA-26-2 Ping, YWC-25-2 Pini, MFC-8-9 Piola, SFC-8-9 Pirotta, MMB-23-9 Pischinger, SMB-4-25 Piskin, ATC-15-2 Pitz, DThC-23-3 Plante, JFC-6-7 Platzer, MFC-8-9 Plunkett, JFA-5-10 Pluymers, B

MA-24-8 Poerner, MWB-28-3 Poggio, EFB-18-2 Pohl, JWC-44-3 Pohorelsky, LWC-4-19 Poinsot, TMA-4-5 Polanka, MMA-4-21 Polifke, WMA-26-7 Polklas, TWA-32-7 Popov, GThA-6-4 Porumbel, IWC-13-3 Povey, TFC-15-4 Prabhudharwadkar, DFB-15-8 Praisner, TWC-15-3 Prakash, CTA-11-5 Prenter, RFA-2-2 Presby, MMB-37-13 Priebe, SWC-4-19 Prieur, KTA-37-6 Pritchard, BMA-11-1 Properzi, EThB-38-15 Pschernig, MWC-19-1 Pu, JFC-31-9 Pugachev, AWA-4-22 Puggelli, SWB-31-3 Pugi, LMB-38-14 Pullan, GMB-26-8 Pusch, DFA-36-6 Qi, JWC-42-6 QI, MWB-23-1 Qi, WWA-29-2 Qian, PThB-37-10 QIAN, YThA-37-11 Qiang, XMA-41-1 Qiao, WWB-4-20 Qin, HThA-16-2 Qin, JTC-31-1 Qin, KTB-37-1 Qin, NWC-45-6 Qin, RThA-37-11 Qin, YTC-5-4 Qingcai, YWC-1-8 Qingxi, LTB-42-1 Qiu, DMA-9-2 QU, XWB-36-1 Ra, HFB-38-17 Raab, IThA-15-5 Raben, MMB-1-14 Rae, AWB-23-1 Rahbar, KFC-15-4 Rai, AWC-1-8 Rajeevalochanam, PWC-42-6 Rajoo, STB-23-6 Rakut, CWC-4-16 Raman, VWA-4-22 Rankin, BThA-16-2 Rao, YFA-23-4 Ratto, LThA-12-4 Ravelli, SThA-16-2 Ravi, BFA-36-6 Reddell, TTC-4-28 Reddy, DFB-18-2 Reddy, VTB-26-3 Rehnsch, ATB-4-6 Reichel, TWC-25-2 Reinker, FFA-5-10 Reiss, HTA-37-6 Reitz, GMB-10-2 Ren, JThA-34-2 Ren, WTA-10-1 Ren, XTB-28-2 Ren, YTC-13-7 Ren, ZMB-27-2 Rendu, QFB-26-10 Ressing, HTC-32-8 Retze, DWB-12-3 Rhee, DWC-19-1 Riahi, AFA-23-4 ricci, GTB-26-3 Rice, T

ThC-17-3 Richard, SMB-21-1 Richardson, MTA-4-14 Richecoeur, FTC-24-1 Ridens, BTB-3-2 Riebl, STB-3-2 Riedel, UMB-40-3 Rife, MTA-23-8 Rimpel, AMB-27-2 Rinderknecht, SWB-31-3 Rindi, AFA-3-4 Rispoli, FThA-28-4 Riva, AFB-26-10 Rixen, DWC-1-8 Riziotis, VTC-4-28 Rizkalla, HWC-22-1 Riznyk, SWB-4-20 Rizzo, SFB-15-8 Robak, CFB-6-6 Roberts, RTB-25-1 Robertson, MWB-36-1 Rochau, GFC-44-2 Rochhausen, SWC-4-19 Rock, NMB-21-1 Rodermann, MFC-44-2 Rodriguez, JTC-23-7 Rodriguez Erdmenger, RTB-25-1 Rodriguez Sotomonte, CThC-13-2 Rogers, NFA-4-9 Rogerson, JWB-36-1 Roh, CThA-3-3 Roizman, AThA-6-4 Rolt, AThB-34-3 Romanelli, GThC-3-8 Romano, CWB-11-2 Romero, EWA-4-33 Romero, PWB-4-20 Romoli, FMB-4-12 Romoser, CFA-37-3 Rona, ATC-15-2 Ronconi, EFC-45-1 Roos, DTB-25-1 Rosa do Nascimento, MFB-38-17 Rose, MFA-38-18 Rosic, BMA-27-1 Rossetti, FThB-8-8 Rossetti, NWA-41-2 Rossikhin, AWB-31-3 Rossin, SWC-1-8 Roumeliotis, IWC-4-19 Rouwenhorst, DWB-23-1 Rowlands, AWA-29-2 Rowlinson, GWB-15-1 Roy, RWC-4-19 Roy, SMB-27-2 Rozenberg, YWB-42-3 Rube, CWB-26-1 Rubechini, FTC-24-1 Rubino, DWC-9-3 Rudersdorf, MWC-4-16 Rudolf, CFC-8-9 Rufli, PTA-12-1 Ruiz, AThB-4-30 Rukes, LMA-4-21 Runte, TTC-42-5 Rusch, DWC-4-16 Ruslan, MWB-23-1 Russell, HThA-3-3 Russell, RWC-13-3 Rutledge, JMB-21-1 Ryan, PThA-1-10 Rybakov, VMA-23-10 Ryu, KTB-32-3 Rzadkowski, RTA-21-2 Saadat, MWB-4-11 Saanum, IWC-5-7 Saavedra, JMB-13-1 Sacco, CFA-4-9 Sadasivuni, STB-3-2 Sadr, R

FINAL PROGRAM | 157

Author Index

FC-45-1 Safari, ATC-45-2 Safari, MTC-17-2 Saggese, RWC-1-8 Sahadevan, STB-21-8 Sahoo, PWC-13-3 Saito, HThC-44-7 Saito, SFA-4-9 Saitoh, TThC-8-6 Sakagami, NWC-42-6 Sakaguchi, DFA-37-9 Sakuma, YTB-39-4 Salah El Din, IFC-8-9 Salazar Pereyra, MMB-26-8 Salazar-Pereyra, MMB-32-5 Salles, LThC-17-3 Salvadori, SMA-11-1 Salvagni, AMA-24-8 Samad, AMA-23-10 San Andres, LFC-39-14 Sanada, HThB-2-1 Sanchez, LMB-37-13 Sandberg, RFC-45-1 Sands, JFB-15-8 Sangan, CFA-3-4 Sänger, AWB-15-1 Santolini, BMA-23-10 Santos, IFC-6-7 Sanz, WMB-13-1 Saracoglu, BTA-26-11 Sasao, YMA-24-8 Sassanelli, GFA-23-4 Satta, FMA-4-21 Sattelmayer, TTC-4-18 Saurabh, AThB-45-7 Sauret, EThB-45-7 Savaria, CTC-17-2 Savary, NMA-46-9 Saverin, JWB-20-5 Savic, STA-44-6 Savin, NWB-15-1 Savov, SFA-3-4 Savuto, ETC-32-8 Sawicki, JFA-19-5 Saxena, RTA-37-6 Saxena, SThA-23-2 Sayma, AWB-42-3 Scarbolo, LTC-4-18 Scarpato, AMB-38-14 Schädler, RTB-4-6 Schaepel, JTB-26-3 Schatz, MTA-21-2 Schaudinn, MFA-19-5 Schiffer, HThA-42-9 Schiffman, JThB-42-7 Schilling, FTB-23-6 Schinnerl, MThC-8-6 Schirmeister, UFA-34-5 Schitter, CTA-37-6 Schlange, STC-4-18 Schlüssler, RThC-4-27 Schmalhofer, CMB-38-14 Schmid, GFB-29-1 Schmidt, RThC-45-8 Schmidt, TThB-9-1 Schmitz, MThA-6-4 Schmitz, OMB-37-2 Schneck, III, WFB-4-23 Schneider, DFA-37-3 Schneider, TTA-44-6 Schnell, RWC-39-6 Schnoes, MMB-13-1 Schobeiri, MTA-44-6 Schoenweitz, DWB-4-11 Schönborn, ATC-7-1 Schönleitner, FWA-37-8 Schreiber, JFB-26-10 Schrey, AFB-6-6 Schroder, ATB-19-2 Schroeder, R

WC-5-7 Schroll, MFB-26-10 Schuerhoff, JMA-4-21 Schuermans, BWC-4-19 Schuller, TWC-17-1 Schulz, AFB-38-17 Schulze, CMA-4-21 Schulze, MMB-26-8 Schumacher, DMB-21-1 Schurb, JThA-42-9 Schwarz, PFA-4-29 Schwärzle, AThB-42-7 Schweigler, CTA-23-8 Schweizer, BMB-21-1 Schwerdtfeger, JMB-32-5 Schwingshackl, CWB-44-5 Scillitoe, AMB-4-25 Sciolti, AFB-15-8 Scobie, JTB-28-2 Scott-Emuakpor, OMA-24-8 Scotti Del Greco, ATA-4-14 Scouflaire, PWA-26-6 Seaton, JThA-34-2 Seeley, CTB-39-4 Seepana Venkata, RFB-26-10 Segletes, DMA-21-3 Seimann, MThA-1-10 Seitz, AWC-4-19 Seitzman, JFB-34-4 Seive, MMB-23-9 Selamet, AMB-1-14 Selezneff, DFC-19-6 Self, KFA-34-5 Selic, TWC-4-19 Selle, LFB-18-2 Selvam, KThC-4-24 Sen, SThC-4-24 Sen, UMA-38-4 Senel, CThC-4-24 Sengupta, PThA-26-4 Senoo, STC-21-4 Seok-Jo, YTC-7-1 Sequeira, CMA-24-8 Serena, AFC-15-4 Sertcakan, MTA-1-11 Sethi, VWC-1-8 Settisara Janney, KFA-5-10 Seume, JThB-15-6 Sevincer, EFB-4-1 Sforzo, BFB-26-5 Sgambati, AMB-37-13 Shabbir, AWB-39-5 Shabliy, LTC-1-9 Shah, PTA-10-1 Shahpar, SWB-37-7 Shahsavari, AWB-4-17 Shanbhogue, SThC-16-1 shang, CMA-18-1 Shankar, KMB-27-2 SHAO, HFA-4-9 Shao, WFA-15-7 SHAO, WMB-36-2 Shao, WTB-30-3 Shao, XWC-1-8 Sharma, NFC-39-14 Sharma, OFB-1-1 Sheaf, CTC-7-1 Sheard, AFC-8-9 Shelton, WWA-42-4 Shen, FTB-28-2 Shen, MFA-2-2 Shen, XTB-26-3 Sheng, SThA-3-3 Sherbaum, VMB-10-2 Shi, BTB-23-6 Shi, XThB-2-1 Shi, YFA-19-5 Shiau, CTB-26-3 Shibukawa, NWC-22-1 Shifler, D

FA-4-29 Shih, HTA-21-2 Shin, DWB-36-1 Shin, HTC-26-13 Shin, SFA-36-6 Shin, YMB-20-3 Shinano, YThB-2-1 Shinohara, KWB-39-5 Shirani, ETB-20-4 Shixi, MWA-32-7 Shklovets, AMB-45-4 Shmotin, YFA-31-10 Shoyama, TThA-26-4 Shu, WWB-38-6 Shuang, SWB-39-5 Shumal, MTC-17-2 Shunn, LWB-37-7 Siddappaji, KMA-24-8 Siddique, MTC-1-9 Sieber, JThB-4-30 Sieber, MWA-37-8 Siemann, JMB-21-1 Sierra, PTB-26-3 Sigg, RMB-27-2 Signori, AThC-23-3 Sikanen, EFA-5-10 Silbergasser, AFC-8-9 Silingardi, AMA-4-21 Silva, CMB-1-14 Silva, DMB-20-3 Sim, KTA-39-12 Simens, MThC-1-5 Simmons, KThA-26-4 Simon, AFA-11-4 Simon, TTA-38-7 Simoni, DMB-4-12 Simons, DTC-24-1 Simons, SThA-28-4 Simonsson, KThC-24-2 Singh, AWC-5-7 Singh, DFA-26-2 Singh, GThA-16-2 Singh, PFA-9-4 Singh, RTA-37-6 Singh, RThC-25-3 Singh, RThA-23-2 Singh, VMA-32-2 Sinha, AFB-41-3 Sinha, NWC-42-6 Sirakov, BFB-4-1 Sirjean, BWA-42-4 Sishtla, VTC-13-7 Siw, SThA-28-4 Sjodin, BWC-38-1 Sjolander, SWC-1-8 Slaboch, PFB-1-1 Slaby, MTB-19-2 Slavens, TTA-28-1 Slobodskoy, DMB-27-2 Smeulers, JThC-23-3 Smirnov, AFB-1-1 Smith, AFB-18-2 Smith, EThC-34-1 Smith, NWC-4-19 Smith, TThA-42-9 Smythe, CFA-16-5 Snyder, JThC-8-6 So, BFB-29-1 Sobotka, JThB-19-3 Socotch, AThA-3-3 Sokolov, DMB-1-14 Soldevilla, NWC-13-3 Sommerer, YWB-44-5 Son, CMB-32-5 Song, GFB-19-8 Song, HMB-27-2 Song, HFA-2-2 Song, JMB-30-1 Song, JWC-25-2 Song, J

ThA-26-4 Song, LThA-24-5 song, PMB-30-1 Song, SWA-39-13 Song, TThA-37-11 Song, YTA-21-2 Sopka, JThC-8-6 Sorato, SMA-27-1 Spagnolo, MTC-1-9 Spakovszky, ZTC-24-1 Spina, PWC-25-2 Spinelli, AFC-6-7 Spliethoff, HWC-9-3 Springer, NWC-5-7 Sridhar, VThB-21-7 Srinivasan, DThC-17-3 Srinivasan, RFB-42-2 Srivastava, RMB-36-2 Srivatsa, SThA-37-11 Staats, MMB-23-9 Stadermann, MThB-9-1 Stadler, MFC-39-14 Staffelbach, GMB-10-2 Staggs, JTC-1-9 Stankowski, TTA-44-6 Stapelfeldt, SThB-9-1 Stark, UThB-26-9 Starzmann, JWB-26-1 Stastny, MTB-4-6 Stathopoulos, PThA-23-2 Staudacher, SWA-24-7 Stefani, AMB-23-9 Steiger, MMB-26-8 Stein, PWB-4-17 Steinbacher, TThA-37-11 Steinberg, SThC-4-24 Steinert, RWB-36-1 Stepanek, JFB-26-10 Stephan, IWC-1-8 Stephens, DFA-16-5 Stimpson, CWC-5-7 Stockhausen, GFB-37-4 Stoessel, MMB-1-14 Stokes, MFB-38-17 Stotz, SWA-4-22 Stouffer, SFB-1-1 Stowe, RFB-26-10 Strauch, MWB-4-17 Strobio Chen, LThC-17-3 Studerus, AFA-5-10 Stuetz, MMB-1-14 Sturm, WTC-4-28 Stuttaford, PMB-40-3 Su, SFC-39-14 Su, XMB-4-12 Subash, AThB-8-8 Sugawara, TMA-11-1 Sugimoto, TFC-6-7 Suleiman, SThB-36-8 Sullivan, SThA-4-7 Sullivan-Lewis, EMA-14-3 Sultanian, BFA-9-4 Suman, AMB-23-9 Sun, HWB-11-2 Sun, HThA-24-5 sun, JWB-1-6 Sun, LWC-22-1 Sun, PFA-26-2 Sun, QWB-1-6 Sun, TTA-4-13 Sun, WThB-38-15 Sun, XTC-15-2 Sun, ZThC-38-2 Sun, ZTC-13-7 Sunden, BFC-39-14 Sundström, EWB-4-20 Sung, CTC-17-2 Sung, YTB-39-4 Sunkara, SFA-34-5 Surwilo, J

158 | ASME 2016 TURBO EXPO

Author Index

TB-20-4 Suryan, AFA-31-10 Svendsen, PWC-31-2 Swanson, EThC-13-2 Sweeney, BTB-32-3 Szczepanik, RTA-37-6 Szucs, PTC-26-13 Szwedowicz, JFA-34-5 Szymaniak, MThC-4-24 Tachibana, SThB-8-8 Tada, KThA-24-5 Taher, MMA-18-1 Takahashi, TThB-8-8 Takata, KWB-11-2 Takeishi, KFC-13-6 Talnikar, CTC-42-5 Tamaki, HTC-4-28 Tambe, SThC-44-7 Tamura, YMB-37-2 Tan, CThB-37-10 Tan, DMA-37-5 Tan, FThB-11-3 Tan, RTA-32-1 Tan, YMA-11-1 Tanaka, RMB-38-14 Tang, EThB-38-15 Tang, FFC-38-11 Tang, HTC-15-2 Tang, HMA-32-2 Tang, WFA-4-9 Tang, XTA-39-1 Tang, XThB-34-3 Tani, NThC-4-27 Tanneberger, TMB-1-14 Tantot, NThA-42-9 Tao, LTA-4-14 Tao, WTB-16-3 Tao, ZTC-24-1 Tapinassi, LThC-13-2 Tarchi, LTB-42-1 Tartinville, BThC-13-2 Taslim, MThC-34-1 Tateishi, AFB-26-5 Taylor, DMB-5-8 Taylor, JWC-9-3 Teixeira, JFB-26-5 Telschow, DFA-6-5 Templalexis, IThA-37-11 Teng, JFC-39-14 Teramoto, SThC-4-27 Terhaar, STC-4-28 Terrell, DTC-21-4 Thanaraj, SThB-15-6 Thatte, AFC-38-11 Thern, MTC-17-2 Theron, SWC-26-14 Thiemann, TFB-15-8 Thole, KThB-39-8 Thollet, WTA-21-2 Thomas, BWA-24-7 Thomas, JFB-18-2 Thompson, HTC-13-7 Thorpe, STB-32-3 Thouverez, FThB-39-8 Ti, CFB-42-2 Tiainen, JFA-26-2 Tian, CFB-37-4 Tian, LTC-37-12 TIAN, SThB-11-3 Tian, SWB-20-5 Tian, XWC-4-19 Tian, YWA-26-6 Tibos, STC-37-12 Tiedemann, CThC-45-8 Tiefers, RThC-13-2 Tinker, NTB-37-1 Tiralap, AThA-23-2 Tisarev, AWC-44-3 Tisserant, DThA-1-10 Tkachenko, A

FC-8-9 Toledo Velazquez, MWC-42-6 Tomita, IWB-39-5 Tong, DFC-15-4 Tong, FMA-41-1 Tong, FWA-31-11 Tong, XMB-4-12 Tong, YThA-42-9 Toni, LMB-4-25 Topal, AFA-37-3 Torabi Farsani, ATC-37-12 Torres, RFC-8-9 Torres Aldaco, AFC-8-9 Torres González, EFB-6-6 torresi, MMA-9-2 Tortora, CTC-46-2 Tourlidakis, AMB-38-14 Town, JMA-5-3 Traverso, AWB-6-3 Traverso, AMA-21-3 Trbojevic, BMB-38-14 Trebinjac, IMA-27-1 Tripoli, GWC-13-3 Trouette, BThC-24-2 Troya, AMA-21-3 Tschuor, RThC-4-24 Tsujimoto, RFB-23-5 Tsujimura, TTC-45-2 Tu, QFB-1-1 Tucker, PWC-42-6 Tun, MFB-6-6 Turner, MThB-26-9 Turunen-Saaresti, TThC-23-3 Tuttle, SThC-25-3 Twomey, BFB-41-3 Tyacke, JMA-39-11 Tyukhtyaev, ATA-38-7 Ubaldi, MMA-18-1 Ubulom, IWB-15-1 Uchida, SThC-8-6 Ueda, OTC-13-7 Ueguchi, SThC-13-2 Um, JFC-31-9 Underbakke, HThA-15-5 Untaroiu, AThC-25-3 Usman, MThA-4-3 Utschick, MThC-23-3 Uusitalo, AThC-23-3 Uzhegov, NMA-5-3 Uzol, OWB-28-3 Vacchieri, EMA-9-2 Vad, JFB-1-1 Vadlamani, NTC-23-7 Vadvadgi, ATC-46-2 Vafiadis, KThC-39-9 Vagnoli, SThC-34-1 Vahdati, MWA-4-22 Valdes, RWC-45-6 Valente, RMB-21-1 Valentin, RMB-27-2 Van Beek, PFA-9-4 van der Spuy, SFB-5-1 van Paridon, AThC-46-10 Van Treuren, KMB-30-1 Vania, ATA-23-8 Vannini, GWC-1-8 Vanzante, DFC-31-9 Varney, PFB-18-2 Vasilyev, BThA-3-3 Vasu, SThC-17-3 Vazquez, MFB-34-4 Vega, AFA-36-6 Veidt, MWA-12-2 Venturini, PThA-3-3 Verdy, CFC-39-14 Vermorel, OFA-3-4 Versailles, PMB-1-14 Versluis, JFA-23-4 Verstraete, DThC-39-9 Verstraete, T

WB-36-1 Vesely, LThC-23-3 Vick, MThA-3-3 Vierling, MMA-24-8 Vigdal, LFA-2-2 Villa Montero, MWB-28-3 Villari, PTB-4-6 Vinkeloe, JFC-31-9 Vinogradov, AMB-45-4 Vinogradov, KWC-17-1 Vinton, KWA-16-4 Virgilio, MThA-1-10 Visser, WTC-17-2 Vitale, IThB-19-3 Voet, MFB-41-3 Vogel, PMB-26-8 Vogeler, KTA-26-11 Vogt, DWA-31-11 Voigt, AThA-39-7 Voigt, CMB-26-8 Voigt, MWC-45-6 Voigt, PMA-38-4 Volino, RMB-38-14 Völker, STC-7-1 Volponi, DFA-9-4 von Backström, TMB-1-14 Von Der Bank, RFA-5-10 von der Haar, HFB-26-10 von Karstedt, WThC-1-5 von Plehwe, FWB-42-3 Voss, CFA-6-5 Vouros, SThA-1-10 Vratny, PWC-31-2 Wade, JMA-27-1 Wagner, FThA-34-2 Waite, JThA-34-2 Wakelam, CMB-20-3 Wakui, TMB-32-5 Wallaschek, JMB-1-14 Walsh, MThA-16-2 Wan, CMB-37-13 Wang, ATC-42-5 Wang, AWC-17-1 Wang, AFB-4-1 Wang, BMB-23-9 Wang, BWC-42-6 Wang, BTC-13-7 Wang, CTB-44-4 Wang, DWA-38-10 Wang, FWB-1-6 Wang, FFC-45-1 Wang, GWC-17-1 Wang, GThC-44-9 WANG, HFA-36-6 Wang, JTB-36-4 Wang, JThA-42-9 Wang, JThB-15-6 Wang, JWB-4-17 Wang, JWC-19-1 Wang, JThA-24-5 Wang, KMB-23-9 Wang, LTB-13-5 Wang, LTC-13-7 Wang, LWA-38-10 Wang, LWB-20-5 Wang, LMA-26-7 WANG, PFC-13-6 Wang, QFA-2-2 Wang, RThA-37-11 Wang, RMB-38-14 Wang, STC-37-12 Wang, SMA-9-2 Wang, TWA-3-1 Wang, TMA-37-5 Wang, WMB-27-2 Wang, WTA-28-1 Wang, WTC-13-7 Wang, WFA-31-10 wang, XFB-29-1 Wang, X

FC-13-6 Wang, XMA-5-3 Wang, XMA-41-1 Wang, XMB-36-2 Wang, XThB-11-3 WANG, XWC-19-1 Wang, XFB-29-1 Wang, YFB-44-1 Wang, YThA-42-9 Wang, YWA-10-3 Wang, YWA-38-10 Wang, YWB-1-6 Wang, YWC-45-6 Wang, YFB-41-3 Wang, ZMA-11-1 Wang, ZMB-20-3 Wang, ZTA-5-6 Wang, ZTB-13-5 Wang, ZThC-38-2 Wang, ZWB-42-3 Wang, ZWC-1-8 Wang, ZMB-37-2 Wartzek, FMA-4-21 Wassmer, DWC-26-14 Watanabe, EThB-2-1 Watanabe, FThC-34-1 Watanabe, TFC-31-9 Watson, CTB-21-8 Watson, MWC-19-1 Watson, TThA-28-4 Wawrzynek, PThA-15-5 Weaver, BMA-39-11 Weber, AWB-42-3 Wedeking, MFB-46-4 Wegner, FThB-11-3 Wei, DTC-42-5 Wei, JThB-19-3 Wei, JWC-22-1 Wei, JTB-16-3 Wei, KFB-4-1 Wei, STC-39-2 Wei, WFB-44-1 Weigel, BTA-38-7 Wein, LWC-4-16 Weinzierl, JMB-14-2 Weiss, TThB-8-8 Welch, MTC-4-28 Weller, RMB-45-4 Wells, RMB-37-13 Wen, FThA-22-2 Wen, XThC-4-27 Wendler, JWC-4-19 Weng, SWA-10-3 Weng, YThB-39-8 Wenhua, WFA-19-5 Werschnik, HFC-6-7 Wettstein, HTA-11-5 Whitaker, SThB-26-9 White, AFC-8-9 White, CThA-23-2 White, MFB-42-2 Whitlock, MMB-37-2 Wicks, ATB-24-14 Wiedermann, ATB-24-14 Wiers, STB-4-2 Wieth, LWC-19-1 Wilkes, EWC-31-2 Wilkes, JWC-44-3 Wilkins, CFA-9-4 Wilkinson, MWC-5-7 Willert, CWA-26-6 Williams, RTB-38-3 Willinger, RMB-4-12 Wilson, MThC-34-1 Wilson, MThA-16-2 Winchler, LTA-4-13 Wind, TWC-4-16 Wirsum, MWB-42-3 Wittrock, DTA-21-2 Witz, G

FINAL PROGRAM | 159

Author Index

TA-4-14 Woisetschlaeger, JTB-24-14 Wolf, DFB-26-5 Wolf, HMB-40-3 Wolf, HTA-5-6 Wolff, SFC-19-6 Wong, TTA-37-6 Woo, GFC-31-9 Wood, HThA-15-5 Wood, HWC-42-6 Wooldridge, MWC-17-1 Wright, LFC-15-4 Wróblewski, WWC-19-1 Wu, AWA-12-2 Wu, BTB-28-2 Wu, DTC-39-2 Wu, HWC-15-3 Wu, HFA-26-2 Wu, QMB-38-14 Wu, QMB-23-9 Wu, WFB-44-1 Wu, XMA-21-3 Wu, XMA-27-1 Wu, XMA-4-5 Wu, YMA-37-5 Wu, YTC-37-12 WU, YTC-37-12 Wu, YWB-12-3 Wu, ZFC-6-7 Wuerth, MThC-31-6 Wygant, KFA-16-5 Wylie, SThB-37-10 Xi, GTB-36-4 Xia, JThC-39-9 Xia, ZThB-37-10 Xiang, XMA-26-7 Xiao, LMA-4-5 Xiao, YWC-39-6 Xiaochen, MFC-45-1 Xiaofeng, LThC-44-7 Xiaofeng, SWC-39-6 XIAOXIONG, WThB-4-26 Xie, RFA-4-9 Xin, JWA-42-4 Xin, JWB-38-6 Xin’gen, LMB-26-8 Xiong, JMA-4-5 Xiong, YThA-6-4 Xisto, CThA-28-4 Xu, BThB-4-26 Xu, BThC-44-7 Xu, DTC-31-1 Xu, FFB-4-1 Xu, GWB-4-11 Xu, GThB-37-10 Xu, JThC-25-3 Xu, JMA-41-1 Xu, KMA-27-1 Xu, MFC-45-1 Xu, SMA-26-7 XU, SFC-1-3 Xu, WWA-16-4 Xu, WWC-4-19 Xu, WThB-38-15 Xu, XMB-32-5 Xu, ZTB-28-2 Xuan, FThC-13-2 Xue, FFB-23-5 Xue, XMB-37-13 XUE, XThA-22-2 Xue-You, WThA-6-4 Yakinthos, KFA-4-9 Yamada, HThC-44-7 Yamada, KMA-18-1 Yamada, STA-26-11 Yamamoto, SThB-8-8 Yamazaki, HFA-31-10 Yan, JFB-1-1 Yan, LTC-39-2 Yan, Q

FB-26-5 Yan, WWA-26-6 Yan, XWB-28-3 Yan, XTC-13-7 Yan, YWC-45-6 Yan, YWB-38-6 Yanfeng, ZFB-26-5 Yang, CFC-1-3 YANG, CMA-5-3 Yang, CMB-23-9 Yang, CMB-23-9 Yang, CTC-42-5 Yang, CTB-42-1 Yang, DWC-21-10 Yang, DWB-44-5 Yang, GFC-1-3 Yang, HMB-26-8 Yang, HWA-37-8 Yang, HMB-26-8 Yang, JMB-26-8 Yang, JMB-36-2 Yang, JWB-4-11 Yang, JTB-28-2 Yang, KFA-11-4 Yang, LFB-5-1 Yang, SFB-19-8 Yang, SWC-26-14 Yang, SWB-1-6 Yang, WFA-11-4 Yang, XTA-30-4 Yang, XThC-45-8 Yang, XThC-25-3 Yang, YWC-21-10 Yang, YWC-1-8 Yangang, WThB-39-8 Yanhui, DTC-4-28 Yaquinto, MWA-46-6 Yassin, KMA-5-3 Yavrucuk, IWA-12-2 Yavuzkurt, SFC-13-6 Ye, LThB-37-10 Ye, SWA-42-4 ye, ZWB-12-3 Yee, KFB-5-1 Yepifanov, STB-23-6 Yi, JFA-37-3 Yi, WMB-26-8 Yi, XFA-26-2 Yin, MTC-23-7 Yin, YTB-36-4 Yiping, DMB-20-3 Yokoyama, RFB-4-23 Yoshida, STB-16-3 You, RFA-37-9 Young, AThC-23-3 Young, TThA-26-4 Yu, DFC-1-3 YU, GWB-42-3 Yu, HFA-37-3 Yu, JWC-17-1 Yu, JTB-25-1 Yu, LWA-42-4 Yu, LTC-37-12 Yu, MTA-30-4 Yu, PThB-19-3 Yu, QFC-13-6 Yu, XTA-21-2 Yu, YWB-23-1 YUAN, QWC-19-1 Yuan, RFC-19-6 Yuan, XFA-4-9 Yuan, YTB-44-4 Yue, LTC-3-5 Yun, YThC-4-27 Yunoki, KMB-1-14 Yves, DThC-8-6 Zachary, JThB-11-3 Zacharzewski, PFB-4-23 Zahn, MTC-3-5 Zaima, N

TA-36-3 Zakariya, MTC-31-1 Zamanian Yazdi, BThA-38-8 Zamboni, GThC-44-9 Zambonini, GThC-44-9 Zamiri, AWA-3-1 zampilli, MTC-4-18 Zander, LTA-32-1 Zang, CFA-36-6 Zang, JWC-4-19 Zang, STC-46-2 Zaproudis, IFA-3-4 Zarzalis, NFB-5-1 Zelenskyi, RTC-42-5 Zeng, HTA-11-5 zeng, JTA-4-14 Zerobin, SMA-26-7 Zess, JThB-37-10 Zha, GTA-12-1 Zhai, YTA-30-4 Zhang, BFB-19-8 Zhang, CTB-28-2 Zhang, CThC-38-2 Zhang, CWB-4-17 zhang, CWC-45-6 Zhang, CTA-30-4 Zhang, DTC-45-2 Zhang, DThC-24-2 Zhang, DThB-11-3 Zhang, FFA-31-10 Zhang, GFB-5-1 Zhang, HMA-37-5 zhang, HWB-20-5 Zhang, HTC-3-5 Zhang, JWA-38-10 Zhang, JWC-17-1 Zhang, JFA-2-2 Zhang, LFB-23-5 Zhang, LFB-26-5 Zhang, LFC-15-4 Zhang, LTC-37-12 Zhang, LWC-13-3 Zhang, LTB-38-3 Zhang, MTB-38-3 Zhang, MTC-4-18 ZHANG, MWA-16-4 Zhang, PTA-30-4 Zhang, QTB-13-5 Zhang, QWC-44-3 Zhang, QTC-23-7 Zhang, STB-38-3 Zhang, TThC-44-9 Zhang, TThC-38-2 Zhang, WWB-12-3 Zhang, WFB-19-8 Zhang, XFB-23-5 Zhang, XMB-38-14 Zhang, XThA-34-2 Zhang, XFC-1-3 ZHANG, YFC-19-6 Zhang, YMB-40-3 Zhang, YTC-23-7 Zhang, YMA-4-5 Zhang, ZMA-4-5 Zhang, ZMA-21-3 Zhang, ZTC-37-12 ZHANG, ZTB-23-6 Zhao, BTA-12-1 Zhao, DThC-34-1 Zhao, FWB-42-3 Zhao, HTA-28-1 Zhao, NTC-5-4 Zhao, NTB-28-2 Zhao, PTB-36-4 Zhao, PThB-37-10 Zhao, QTC-42-5 Zhao, SWC-1-8 Zhao, WMB-27-2 Zhao, XThA-6-4 zhao, X

ThA-28-4 ZHAO, XWA-41-2 Zhao, XFA-4-9 Zhao, YFB-4-1 Zhao, YMA-32-2 Zhao, YWB-39-5 Zhao, YThB-39-8 Zhaolin, FFC-45-1 zhaoyun, SThC-44-7 zheng, LTA-12-1 Zheng, QThA-37-11 Zheng, TWA-37-8 ZHENG, XFC-13-6 Zheng, YTC-31-1 Zheng, YThB-4-26 Zheng, YWB-38-6 Zhijun, LMA-18-1 ZHIXun, XTB-13-5 Zhong, FMA-38-4 Zhong, GThA-12-4 Zhong, LTC-1-9 Zhong, YTA-32-1 Zhou, BThC-8-6 Zhou, BThA-12-4 Zhou, CFB-5-1 Zhou, DWA-38-10 Zhou, EWB-20-5 Zhou, JFB-44-1 Zhou, KWA-42-4 Zhou, LFB-19-8 Zhou, SMB-10-2 Zhou, WMA-26-7 Zhou, XMB-37-13 Zhou, XTC-37-12 Zhou, YMA-4-5 Zhou, ZTA-12-1 Zhu, HMB-4-12 Zhu, JTA-11-5 Zhu, JTC-42-5 Zhu, JWC-22-1 Zhu, KThB-4-26 Zhu, MWC-45-6 Zhu, PThC-44-7 zhu, ZTC-23-7 Zhuge, WFB-26-5 Zhuhai, ZThA-15-5 Zierer, TThA-22-2 Zi-gang, SFA-38-18 Zimmermann, AThC-38-2 Zimmermann, TTB-36-4 Zitney, STB-4-2 Zizin, AWC-25-2 Zocca, MMB-4-25 Zoller, BFC-34-6 Zori, LWB-39-5 Zubanov, VMB-4-25 Zubrilin, IMB-4-12 Zubrilin, RMA-32-2 Zucca, SWB-4-20 Zunino, PThC-45-8 Zur, S

160 | ASME 2016 TURBO EXPO

Notes

FINAL PROGRAM | 161

Notes

162 | ASME 2016 TURBO EXPO

Notes

FINAL PROGRAM | 163

Schedule at a Glance

SundayJune 12

MondayJune 13

TuesdayJune 14

WednesdayJune 15

ThursdayJune 16

FridayJune 17

GT Workshops8:00 a.m. – 5:00 p.m.Rooms 204, 205, 206,

209, 210

Registration 7:00 a.m. – 5:30 p.m.

Hall C4

Registration 7:00 a.m. – 6:30 p.m.

Hall C4

Registration 7:00 a.m. – 6:30 p.m.

Hall C4

Registration 7:00 a.m. – 5:30 p.m.

Hall C4

Registration 7:00 a.m. – 3:00 p.m.

Hall C4

Speaker Ready Room

7:00 a.m. – 5:30 p.m.Room 310

Speaker Ready Room

7:00 a.m. – 5:30 p.m.Room 310

Speaker Ready Room

7:00 a.m. – 5:30 p.m.Room 310

Speaker Ready Room

7:00 a.m. – 5:30 p.m.Room 310

Speaker Ready Room

7:00 a.m. – 3:30 p.m.Room 310

Session Participant Networking Coffee

7:15 – 8:00 a.m. Hall C4

Session Participant Networking Coffee

7:15 – 8:00 a.m. Hall C4

Session Participant Networking Coffee

7:15 – 8:00 a.m. Hall C4

Session Participant Networking Coffee

7:15 – 8:00 a.m. Hall C4

Session Participant Networking Coffee

7:15 – 8:00 a.m. Hall C4

Conference Sessions8:00 – 10:00 a.m.

Plenary: Asset Optimization and Monitoring in the Information Age

8:00 – 8:45 a.m.Grand Ballroom

Plenary: Gas Turbine Manufacturing in the

Energy Age8:00 – 8:45 a.m.

Auditorium

Conference Sessions8:00 – 10:00 a.m.

Conference Sessions8:00 – 10:00 a.m.

Registration 12:00 – 6:00 p.m.

Hall C4 Opening Session:Turbo Expo

Keynote Panel & Awards Program

10:15 a.m.– 12:15 p.m.Grand Ballroom

Conference Sessions9:00 - 10:30 a.m.

Conference Sessions9:00 - 10:30 a.m.

Coffee Break10:00 – 10:15 a.m.

Coffee Break10:00 – 10:15 a.m.

Speaker Ready Room

1:00 – 6:00 p.m.Room 310

Coffee Break10:30 - 10:45 a.m.

Coffee Break10:30 - 10:45 a.m.

Conference Sessions10:15 a.m.– 12:15 p.m.

Conference Sessions10:15 a.m.– 12:45 p.m.

Council of Chairs6:00 – 7:30 p.m.

Room 300

Conference Sessions10:45 a.m. - 12:45 p.m.

Conference Sessions10:45 a.m. - 12:45 p.m.

Expo Open11:30 a.m. – 2:30 p.m.

Hall C1

Opening Lunch12:30 – 2:30 p.m.

Hall C4

Expo Open12:30 – 6:30 p.m.

Hall C1

Expo Open12:30 – 6:30 p.m.

Hall C1

Expo Lunch12:30 – 2:30 p.m.

Closing Ceremony1:45 p.m. Hall C1

Closing Lunch12:30 – 2:30 p.m.

Hall C4

Conference Sessions2:30 – 5:30 p.m.

Expo Lunch12:30 – 2:30 p.m.Poster Session12:30 – 2:30 p.m.

Hall C1

Expo Lunch12:30 – 2:30 p.m.

Hall C4

Conference Sessions2:30 – 5:30 p.m.

Conference Sessions2:30 – 5:30 p.m.

Welcome Reception6:00 – 7:30 p.m.

InterContinental Seoul COEX

Harmony Ballroom and Diamond Room

Conference Sessions2:30 – 5:30 p.m.

Conference Sessions2:30 – 5:30 p.m.

Expo Hall Reception5:00 – 6:30 p.m.

Hall C1

Expo Hall Reception5:00 – 6:30 p.m.

Hall C1

Committee Meetings6:00 – 7:30 p.m.

Committee Meetings6:00 – 7:30 p.m.

Committee Meetings6:00 – 7:30 p.m.

Women in Turbomachinery

Event7:45 – 10:30 p.m.Off-site Venue

ECE/Student Mixer6:45 – 8:00 p.m.

Auditorium Lobby

Are You Up to the Challenge?

Your product promise is low fuel burn and reliable turbomachinery. ANSYS can help you realize this with multiphysics engineering simula-tion tools that provide high-fidelity results. In a time frame that gets your product to the customer faster than you ever thought possible.Visit us at Booth # 800

Realize Your Product Promise®

Visit ANSYS.COM to learn how simulation software can help you realize your product promise.