Dr. Ananda Kumar - AUKDC

Dr. Ananda KumarAssociate professor, Department of Chemistry

Cellphone : Avail by Reques

e-Mail ID : [email protected]

Address : 1 kumaran colony 2nd street, Vadapalani Chennai -600 026

Present Position

Associate professor, Department of Chemistry, College of Engineering Guindy, AnnaUniversity, Chennai from May-2017.

Previous Positions

Assistant Professor, Department of Chemistry, College of Engineering Guindy, AnnaUniversity, Chennai during February-2009 and May-2014.

Lecturer, , College of Engineering Guindy, Anna University, Chennai during February-2005and February-2009.

Previous Additional Responsibility

Additional Director, Centre for Enterpreneurship Development, Anna University, Chennaiduring August-2014 and June-2015.

In-charge For Guest Lectures And Industrial Visits, Department of Chemistry, AnnaUniversity, Chennai during June-2012 and December-2014.

Chief Superintendent, Department of Chemistry, Anna University, Chennai duringJanuary-2012 and December-2014.

In-charge For Guest Lectures And Industrial Visits, , Anna University, Chennai duringJune-2011 and December-2014.

Other Employment

Consultant, Aishwaryaa Organics Pvt Ltd for (on going).

Consultant, Vansun Intermediates India Pvt Ltd for 4 years.

Consultant, A nanotech company at Ambattur (Susira) for 1.5 years.

Junior Research Fellow (AICTE Project), Department of Chemical Engineering, AC Tech,Anna University for 2 years.

Senior Research Fellow CSIR, Department of Chemical Engineering, AC Tech, AnnaUniversity for 3 years.

page 1 / 21


Senior Research Fellow (Extended) CSIR, National Metallurgical Lab, Chennai for 1 year.

Research Associate CSIR, Department of Physical Chemistry, University of Madras for 1year.

Postdoctoral Researcher, Demont Fort University, Leicester, UK & University of Minho,Portugal for 1.3 years.

Degree

M.Sc. in CHEMISTRY , C Abdul Hakeem College, Melvisharam, Arcot, Vellore, University ofMadrs (1992 - 1994).

B.Sc. in CHEMISTRY , Voorhees College, Vellore, University of Madras (1989 - 1992).

Research Degree

Postdoctoral Research in Polymer Chemistry from Faculty of Chemistry, Demont FortUniversity, Leicester, UK, Demont Fort University (2004 - 2004).Title: Development of biocide loaded polymer coatings and their evaluation.

Postdoctoral Research in Polymer Coatings & Composites from Faculty of Engineering,Institute of Polymer Composites, University of Minho, Portugal (2003 - 2004).Title: Silocne and phosphorus containing epoxy materials as anti corrosive and flameretardant coatings.

Ph.D. in Polymer Chemistry and Material Science from Faculty of Chemistry, A C Tech,Anna University (1996 - 2001).Title: Development and Characterization of siliconized epoxy Interpenetrating coatings forhigh performance corrosion resistant applications.

Area of Specialisation

Nano-hybrid coatings and composites, POSS-epoxy hybrids, antifouling coatin

Membership in Professional Organization

American Nano Society, Society for polymer Science Chennai, NACE

Research Guidance

Number of Ph.D Scholars Guided : 5Number of Ph.D Scholars Guiding : 5Number of M.E./ M.Tech. Projects Guided : 60Number of M.E./ M.Tech. Projects Guiding : 3Number of Ph.D Scholars Guiding as Joint-Supervisor : 1

page 2 / 21


Papers Published in Journals

Research Papers Published in International Journals : 62Research Papers Published in National Journals : 0

1. Ananda kumar S., Alagar M, Mahesh K. P. O. and Mohan V., "A Novel siliconized epoxyinterpenetrating coating for marine structures", European Coatings Journal , Issue 9, pp. 84-88(1999).

2. Ananda kumar S., Alagar M and Mohan V, "Corrosion resistance of siliconized epoxy coatings",

European Coatings Journal , Issue 5, pp. 64-67 (1999).

3. Ananda kumar S., Alagar M, Mahesh K.P.O., Sankara Narayanan T. S. N. and Mohan V,"Evaluation of siliconized epoxy coatings by electrochemical impedance spectroscopy",European Coatings Journal , Issue 3, pp. 63-74 (2000).

4. Ananda kumar S., Alagar M, and Mohan V, "Assessment of potentiodynamic polarization

behaviour of siliconized epoxy interpenetrating coatings", Surface Coatings International ,published by U.K.London. pp. 43-47 (2001).

5. Ananda kumar S., and Alagar M, "siliconized epoxy interpenetrating coatings,

physico-mechanical properties", European Coatings Journal , Issue 5, pp. pp.152- 159 (2001).

6. Ananda kumar S., Alagar M and Mohan V, "Studies on corrosion protection behaviour ofsiliconized epoxy interpenetrating coatings over mild steel surface by electrochemicalmethods,", Journal of Materials Engineering and Performance , published by ASM InternationalPublication, U S A. Vol. 2, pp. 123-131 (2002).

7. S Ananda Kumar, T.S.N Sankara Narayanan, "Thermal properties of siliconized epoxy

interpenetrating coatings ", Progress in Organic Coatings, published by Elsevier. Vol. 45, Issue4, pp. 323-330 (2002).

8. Ananda kumar S and Alagar M., " studies on the development of siliconized epoxy

anticorrosive and antifouling coatings", European Coatings Journal, Issue 5, pp. 39-50 (2002).

9. Mahesh K P O, Alagar M and Ananda kumar S, "Mechanical, thermal and morphologicalbehaviour of bis maleimide modified polyurethane - epoxy IPN matrices", Polymer ForAdvanced Technologies, published by Wiley InterScience. Vol. 14, Issue 2, pp. 137-146(2003).

10. S. Ananda kumar, Z. Denchev, M. Alagar, "Synthesis and thermal characterization of

phosphorus containing siliconized epoxy resins", European Polymer Journal, published byElsevier. Vol. 42, Issue 10, pp. 2419-2429 (2006).

11. S. Ananda Kumar, T. Balakrishnan, M. Alagar, Z. Denchev, "Development and characterization

of silicone/phosphorus modified epoxy materials and their application as anticorrosion andantifouling coatings", Progress in Organic Coatings, published by Elsevier. Vol. 55, Issue 3, pp.207-217 (2006).

page 3 / 21


12. S. Ananda Kumar, K. Shree Meenakshi, T.S.N. Sankaranarayanan, S. Srikanth, "Corrosionresistant behaviour of PANI–metal bilayer coatings ", Progress in Organic Coatings, publishedby Elsevier. Vol. 62, Issue 3, pp. 285-292 (2008).

13. S. Ananda Kumar, Z. Denchev, "Development and characterization of phosphorus-containing

siliconized epoxy resin coatings", Progress in Organic Coatings, published by Elsevier. Vol. 66,Issue 1, pp. 1-7 (2009).

14. S Ananda kumar, K Shree Meenakshi, B. R. V Narasimhan, S. Srikanth. and G.

Arthanareeswaran, "Synthesis and characterization of Cu nanofluids by Novel one stepmethod", Materials chemistry and Physics , published by Elsevier. Vol. 113, Issue 1, pp. 57-62(2009).

15. G. Arthanareeswaran, S. Anandakumar, "Effect of PVP/PEG additives on CA-PES blend

membranes", Journal of porous Materials , published by Springer. Vol. 17, Issue 5, pp. 515-522(2010).

16. S. Ananda Kumar, and A. Sasikumar, "Studies on novel silicone / phosphorus / sulphur

containing nanohybrid epoxy anti-corrosive and antifouling coatings Progress in OrganicCoatings", Progress in Organic Coatings, published by Elsevier. Vol. 68, Issue 3, pp. 189-200(2010).

17. K. Shree Meenakshi, E. Pradeep Jaya Sudhan, S. Ananda Kumar, M. J. Umapathy,

"Development and characterization of novel DOPO based phosphorus tetraglycidyl epoxynanocomposites for aerospace applications", Progress in Organic Coatings, published byElsevier. Vol. 72, Issue 3, pp. 402-409 (2011).


"Development of Siloxane Based Tetraglycidyl Epoxy Nanocomposites for High PerformanceApplications—Study of the Mechanical, Thermal, Water Absorption and Flame RetardantBehaviour", Silicon, published by Springer. Vol. 3, Issue 1, pp. 45-52 (2011).


"Development of dimethylsiloxane based tetraglycidyl epoxy nanocomposites for highperformance, aerospace and advanced engineering applications", Progress in OrganicCoatings, published by Elsevier. Vol. 74, Issue 1, pp. 19-24 (2012).

20. K SHREE MEENAKSHI, E PRADEEP JAYA SUDHAN, S ANANDA KUMAR, "Development

and characterization of new phosphorus based flame retardant tetraglycidyl epoxynanocomposites for aerospace application", Bulletin of Materials Science, published bySpringer. Vol. 35, Issue 2, pp. 129-136 (2012).

21. Duraibabu. D, Ganeshbabu .T, Manjumeena .R Ananda kumar .S Priya Dasan, " Unique

Coating Formulation for Corrosion and Microbial Prevention of Mild Steel ", Progress in OrganicCoatings, published by Elsevier. Vol. 77, Issue 3, pp. 657-664 (2013).

22. D. Duaraibabu, M. Alalgar, S. Ananda Kumar, " Studies on mechanical, thermal and dynamic

mechanical properties of functionalized nanoalumina/reinforced sulphone ether linked tetraglycidyl-toughened epoxy nanocomposites", RSC Advances, published by RSC Publishing.Vol. 4, Issue 76, pp. 40132-40140 (2014).

page 4 / 21


23. YIHEYISBOGALEZEMEDE, D. NITHY AKALY ANI and S. ANANDAKUMAR, " SYNTHESIS,STRUCTURAL CHARACTERIZATION, CORROSION INHIBITION AND IN VITROANTIMICROBIAL STUDIES OF 2-(5-METHOXY-2-HYDROXYBENZYLIDENEAMINO)PHENOL SCHIFF BASE LIGAND AND ITS TRANSITION METAL COMPLEXES", InternationalJournal of ChemTech Research , published by Sphinx Knowledge House. Vol. 6, Issue 11, pp.4569-4578 (2014).

24. J. Sheeba Vinolia, D. Duraibabu, S.Aparna S. Ananda Kumar*, " SKELETALLY MODIFIED

POLYAMIDE FLAME RETARDANT COATINGS", OAlib Journal, published by ScientificResearch Publishing. Vol. 1, Issue 7, pp. 1-7 (2014).

25. P. Saravanan, S. Ananda Kumar and D. Duraibabu, " Development of Environmentally

Acceptable Nanohybrid Coatings for Bio-Fouling Protection", Advanced Materials Research,published by Trans Tech Publications, Switzerland. Vol. 938, Issue 1, pp. 269-274 (2014).

26. D. Duraibabu, T. Ganeshbabu, P. Saravanan, S. Ananda Kumar, "Development and

characterization of novel organic-inorganic hybrid sol-gel films", High Performance Polymers,published by SAGE. Vol. 26, Issue 7, pp. 725-733 (2014).

27. Duraibabu .D, Saravanan. P, Gowripriya Rebheka P, AnandaKumar .S, " A comparative study

on modified epoxy and glycidyl carbamate coatings for corrosion and fouling prevention",Surface Innovations, published by ICE Publishing. Vol. 3, Issue 2, pp. 127-139 (2014).

28. Duraibabu .D, Vinothkumar .S, Alagar .M, AnandaKumar .S, " Synthesis and Characterization

of New Ether Linked Tetraglycidyl Epoxy Silicate Nanocomposites", Silicon, published bySpringer. pp. 1-11 (2014).

29. Dhanapal Duraibabu, Venkatachalam Madhumitha 1, Muthukaruppan Alagar 2, Srinivasan

Ananda kumar 1*, Shyamsunder Abhinandan, " Development and Characterization of a NovelSkeletal Modified Tetraglycidyl Epoxy Toughened DGEBA Epoxy Matrices", Polymer ScienceSeries C , published by Russian Academy of Sciences. Vol. 56, Issue 4, pp. 480-487 (2014).

30. B. Asaithambi*, G. Ganesan, S. Ananda Kumar, " Bio-composites: Development and

mechanical characterization of banana/sisal fibre reinforced poly lactic acid (PLA) hybridcomposites", Fibers and Polymers, published by Springer. Vol. 5, Issue 4, pp. 847 (2014).

31. P. Saravanan, , K. Jayamoorthy, S. Ananda Kumar, "Switch-On fluorescence and

Photo-induced electron transfer of 3-aminopropyltriethoxysilane to ZnO: Dual applications insensors and antibacterial activity", Sensors and Actuators, published by Elsevier. Vol. 221, pp.794 (2015).

32. D. Duaraibabu, M. Alalgar, S. Ananda Kumar, "Development and Characterization of

Tetraglycidyl Epoxy Reinforced Inorganic Hybrid Nanomaterials for High PerformanceApplications", High Performance Polymers, published by SAGE. Vol. 28, Issue 7, pp. 773-783.(2015).

33. B. Asaithambi, S. Ganesan, S. Ananda Kumar, " Biocomposites; Influence of Chemical

Modification of BSF Towards Thermal Properties", Polymer Composites, published bySpringer. Vol. 38, Issue 6, pp. 1053-1062 (2015).

page 5 / 21


34. B. Asaithambi, S. Ganesan, S. Ananda Kumar, " Thermal and Morphological Analysis ofBanana and Sisal Fibers Reinforced Polylactide Hybrid Bio-Composites", Journal of AdvancedMicroscopy Research, published by American Scientific Publishers. Vol. 10, Issue 2, pp.124-131 (2015).

35. S. Krishna Kumar, S. Ananda Kumar, " A Management Framework for Human Resource

Friendly Non-Toxic nano Hybrid Coatings for Corrosion and Fouling Prevention", InternationalJournal of Business Intelligence & Innovations, published by University of Madras. Vol. 1, Issue2, pp. 125 (2015).

36. P. Saravanan, S. Aparna, S. Ananda Kumar and D. Duraibabu, "Studies on biocide

encapsulated zeolite-epoxy nano hybrid coatings on mild steel", Current Bionanotechnology,published by Bentham Science. Vol. 1, pp. 1 (10.2174/2213529401666150304234007) (2015).

37. B. Asaithambi, S. Ganesan, S. Ananda Kumar, "Thermal Characterization of Hybridized

Banana and Sisal Fibers Reinforced PLA Bio-Composites", Molecular Symposia, published bySpringer. (2015).

38. YIHEYISBOGALEZEMEDE, D. NITHYAKALYANI and S. ANANDAKUMAR, "

Synthesis,Characterization and Antimicrobial Properties of Some Transition Metal Complexeswith NS-Chelating Schiff Base Ligand Incorporating Thiophene and Sulfonamide Moieties",Asian Journal of Chemistry, published by Asian Publication Corporation. Vol. 27, Issue 3, pp.941-948 (2015).

39. P. Saravanan, K. Jayamoorthy and S. Ananda Kumar, " Design and characterization of

non-toxic nano-hybrid coatings for corrosion and fouling resistance", Journal of Science:Advanced Materials and Devices, published by Elsevier. Vol. 1, Issue 3, pp. 367-378 (2016).

40. P. Saravanan, K. Jayamoorthy and S. Ananda Kumar, " Fluorescence quenching of APTES by

Fe2O3 nanoparticles - Sensor and antibacterial applications", Journal of Luminescence,published by Elsevier. Vol. 178, Issue 1, pp. 241-248 (2016).

41. S. Suresh, P. Saravanan, K. Jayamoorthy, S. Ananda Kumar, S. Karthikeyan, " Development

of silane grafted ZnO core shell nanoparticles loaded diglycidyl epoxy nanocomposites film forantimicrobial applications", Materials Science and Engineering: C, published by Elsevier. Vol.64, Issue 1, pp. 286-292 (2016).

42. D.Duraibabu, M. Alagar and S. Ananda Kumar, " Tetraglycidyl Epoxy Reinforced with Surface

Functionalized Mullite Fiber for Substantial Enhancement in Thermal and MechanicalProperties of Epoxy Nanocomposites", Silicon, published by Springer. Vol. 10, Issue 2, pp.585-594 (2016).

43. P. Saravanan D. Duraibabu K. Jayamoorthy · S. Suresh · S. Ananda Kumar, " Twin

Applications of Tetra-Functional Epoxy Monomers for Anticorrosion and Antifouling Studies",Silicon, published by Springer. Vol. 10, Issue 2, pp. 555-565 (2017).

44. P. Saravanan, S. Ananda Kumar and D. Duraibabu, " Studies on Silicon Containing

Nano-hybrid Epoxy Coatings for the Protection of Corrosion and Bio-Fouling on Mild Steel",Silicon, published by Springer. Vol. 9, Issue 3, pp. 447-458 (2017).

page 6 / 21


45. D. Duraibabu, D. Rajagopal, S, Ananda Kumar, " A First MMT Reinforced Nanocompositefunctionalized with ether linkage derived from Tetraglycidyl/Diglycidylepoxy building block",Progress in Organic coatings, published by Elsevier. Vol. 104, pp. 135-140 (2017).

46. D. Duaraibabu, R. Neelakantan, S. Ananda Kumar, "Role of POSS as coupling agent for

DGEBA/GF reinforced nanocomposites", Silicon, published by Springer. Vol. 10, Issue 2, pp.537-546 (2017).

47. Jayasree M.R., Anandakumar S*, and Alagar M, " Development and characterisation of

functionalised ALâ€•MCMâ€•41 reinforced caprolactam toughened DGEBA epoxyâ€•cyanateester polymer nano-composites ", Advances in Polymer Technology, published by WILEY. Vol.37, Issue 6, pp. 1906 (2018).

48. S.Mahendraselvan, D. Duraibabu, A. Gnanaprakasam and S. Ananda Kumar, " Enhancing the

Thermal and Mechanical Properties of OrganicInorganic Hybrid Nanocomposite Films Basedon Poly Lactic Acid/OMMT Nano Clay ", Journal of Coatings Science and Technology,published by Life Science Global. Vol. 4, Issue 3, pp. 59-65 (2018).

49. K Shreemeenakshi, S. Ananda Kumar, "Development of Siloxane Based Tetraglycidyl Epoxy

Nanocomposites for High Performance Applications—Study of the Thermo Mechanical,Electrical, XRD, EDS and Physical Properties", Silicon, published by Springer. pp. 1-9 (2018).

50. S. Ananda Kumar and S. Aparna, " Natural Biocide Loaded PLA Films for a Possible

Packaging Application", Journal of Advanced Microscopy Research, published by AmericanScientific Publishers. Vol. 13, Issue 1, pp. 39-47 (2018).

51. N sundar, P Keerthana, S Ananda Kumar, G Ananda Kumar, " Dual Purpose , Bio-based

Polylactic acid (PLA)-Polycaprolactone (PCL) blends for Coated Abrasive and PackagingIndustrial Coating Applications", Journal of Polymer Research, published by Springer. Vol. 27,Issue 386, pp. 1 (2020).

52. P Keerthana, N Sundar and S Ananda Kumar, "Fireworks in Times of COVID-19: Predictable

Disaster", International Journal of Advanced Research in Science, Communication andTechnology, published by www.isbn.gov.in. Vol. 9, Issue 1, pp. 89 (2020).

53. S Swathi, P Keerthana, G Rajiv, S. Ananda Kumar, J P Nirmala and R Neelakandan, " Design

of Eco-Friendly Poly Lactic Acid (PLA) Film loaded with bio-additives for Possible FoodPackaging Applications", Exploratory Materials Science Research, published by KEFfoundation. pp. 1 (2020).

54. A. Jacob Moses, A. Sureshbabu and S. Ananda Kumar, "Analysis of Physical Properties and

Wear Behavior of Phenol Formaldehyde - Basalt Fiber Reinforced Brake Pad", Materials TodayProceedings, published by Elsevier. pp. 1 (2020).

55. Santhosh J, Ananda Kumar S, Mandhakini M, Ariraman M, "Role of amines in microstructure

tuning for synergistic damping and mechanical properties in epoxy", Progress in OrganicCoatings, published by Elsevier. pp. 1 (2020).

56. N Sundar, S Ananda Kumar*, A Pavithraa, S Ghosh, " Studies on Semi-crystalline Poly Lactic

Acid (PLA) as a Hydrophobic Coating Material on Kraft Paper for Imparting Barrier Propertiesin Coated Abrasive", Progress in Organic Coatings, published by Elsevier. Vol. 145, Issue 1,pp. 105682 (2020).

page 7 / 21


57. Premkumar Jayaraj, Gopal Venkatesh Shavi, Anandakumar Srinivasan, RameshRaghavendra, Akella Sivaramakrishna, Desikan Rajagopal, "Pre-formulation strategy forliposome encapsulation of new thioctic acid conjugates for enhanced chemical stability andefficient drug carrier for MPO-Mediated atherosclerotic CVD treatment", New Journal ofChemistry, published by Royal Society of Chemistry. Vol. 44, pp. 2755-2767 (2020).

58. P Keerthana and S. Ananda Kumar, " Scientific theology behind the importance of collecting

Cremated ashes of COVID-19 dead patients", Journal of Bacteriology & Mycology:, publishedby MedCrave. Vol. 9, Issue 1, pp. 4 (2021).

59. N. Sundar, S. Johan Stanley, S. Ananda Kumar*, P. Keerthana, G. Ananda Kumar, "

Development of Dual Purpose, Industrially Important PLA-PEG Based Coated Abrasives andPackaging Materials", Journal of Applied Polymer Science, published by Wiley. Vol. 138, Issue21, pp. 50495 (2021).

60. N Sundar, S Ananda Kumar, P Keerthana, Johan Stanley and G Ananda Kumar, " Schiffâ€™s

Base (SB) Modified Zirconium dioxide Reinforced PLA Bio-composite film for IndustrialPackaging Applications ", Composites Communications., published by Elsevier. Vol. 25, pp.100750 (2021).

61. N Sundar, S Ananda Kumar, Johan Stanley, " Design and Development of Schiffâ€™s Base

(SB) Modified Polylactic acid (PLA) Anti-microbial Film for Packaging Applications", PolymerBulletin, pp. 2021 (2021).

62. D Duraibabu, M Alagar and S Ananda Kumar, "Influence on organic inorganic hybrid (mullite)

fibre on mechanical, thermo-mechanical and morphological properties of TGDDM epoxynanocomposites", MATERIALS RESEARCH INNOVATIONS, published by taylor & francis.Vol. 10, pp. 1-8 (2021).

Papers Presented in Programmes

Research Papers Presented in International Programmes : 33Research Papers Presented in National Programmes : 5

1. 17. K. Shree Meenakshi and S. Ananda Kumar, "Novel tetraglycidyl flame retardant epoxyresin" presented in a International level conference on Modern Trends in MaterialsTechnology-2009, organised by Sri Venkateswara college of Engineering, India from19-Jan-2009 to 20-Jan-2009.

2. K. Shreemeenakshi and S. Anandakumar, "Novel tetraglycidyl flame retardant epoxy resin”"presented in a International level conference on International Conference on Modern Trends inMaterials Technology-2009”, organised by Sri Venkateswara college of Engineering,Sriperambudur held at Hotel Green Park, Chennai, India, India from 19-Jan-2009 to20-Jan-2009.

3. K. Shreemeenakshi and S. Anandakumar, "Synthesis and characterization of tetraglycidylflame retardant epoxy resins" presented in a International level conference on MACRO 2009,organised by IIT-Madras, India from 09-Mar-2009 to 11-Mar-2009.

page 8 / 21


4. 14. K. Shree Meenakshi, Prathibha G Menon and S. Ananda Kumar, "Synthesis andcharacterization of tetraglycidyl epoxy nanocomposites" presented in a International levelconference on Second International conference on Polymer Processing and Characterization,organised by Mahatma Gandhi University, India from 15-Jan-2010 to 17-Jan-2010.

5. K. Shreemeenakshi and S. Anandakumar, "Synthesis and characterization of tetraglycidylepoxy nanocomposites”" presented in a International level conference on Second Internationalconference on Polymer Processing and Characterization, organised by Mahatma GandhiUniversity, Kottayam,, India from 15-Jan-2010 to 17-Jan-2010.

6. K. Shreemeenakshi and S. Anandakumar, "Development of high functionality epoxynanocomposite materials" presented in a International level conference on National conferenceon Multifunctional Nanomaterials and Nanocomposites (NCMNN 2010), organised byBharathiyar University, Coimbatore, India, India from 04-Feb-2010 to 05-Feb-2010.

7. K. Shree Meenakshi and S. Ananda Kumar, "Synthesis and characterization of noveltetraglycidyl epoxy nanocomposites for high performance application" presented in aInternational level conference on International conference on Nanoscience andNanotechnology (ICONN 2010), organised by S.R.M. University, Kattangulathur, India from24-Feb-2010 to 26-Feb-2010.

8. K. Shreemeenakshi and S. Anandakumar, "Development of organic-inorganic hybridnanocomposites for high performance applications”" presented in a International levelconference on “International conference on advancement of Nanoscience and Nanotechnology(ICOANN 2010), organised by Alagappa University, Karaikudi, India , India from 01-Mar-2010to 03-Mar-2010.

9. "Development of Siloxane Based Tetraglycidyl Epoxy Nanocomposites for High PerformanceApplications" presented in a International level conference on NANOMEET-2010, organised byDepartment of Mechanical Engineering, Anna University, Chennai, India from 25-Mar-2010 to26-Mar-2010.

10. D. Duraibabu, K. Shreemeenakshi, S. Ananda Kumar, "Non-Toxic Biocide loaded nano hybridcoatings" presented in a International level conference on INSYN-2010, organised by Centrefor Nano-Technology Research, VIT University, Vellore , India from 25-Aug-2010 to26-Aug-2010.

11. K. Shree Meenakshi, D. Duraibabu and S. Ananda Kumar, "Development of TGDDM basedtetraglycidyl epoxy nanocomposites for high performance, aerospace and advancedengineering applications" presented in a International level conference on INSYN-2010,organised by Centre for Nano-Technology Research, VIT University, Vellore , India from25-Aug-2010 to 26-Aug-2010.

12. S. Ananda Kumar, "Risk Management with irreversible outcome" presented in a Internationallevel conference on Indo-German Frontiers in Engineering symposium, organised byIndo-German Frontiers in Engineering symposium, Germany from 13-Jun-2012 to16-Jun-2012.

page 9 / 21


13. "Development and characterization of Tetraglycidyl-Diglycidyl Epoxy nanocomposites withether linkage" presented in a International level conference on International Symposium onMacro and Supra-molecular Architectures and Materials: Nano Systems and Applications(MAM-2012), organised by PSG College of Engineering,-Coimbatore, India, INDIA from21-Nov-2012 to 25-Nov-2012.

14. D.Duraibabu, S.Abhinandan, M.Alagar and S. Ananda Kumar, "Development andcharacterization of anticorrosive coatings based on a novel skeletal modified tetra functionalepoxy" presented in a International level conference on ISRS2012-International Symposium forresearch scholars on Metallurgy , material science and Engineering, organised by IIT Chennai,India, India from 13-Dec-2012 to 15-Dec-2012.

15. 2. D.Duraibabu, S.Vinothkumar, M.Alagar and S. Ananda Kumar, "Development AndCharacterization Of Novel Ether Containing Tetraglycidyl Epoxy Clay Nanocomposites"presented in a International level conference on Development And Characterization Of NovelEther Containing Tetraglycidyl Epoxy Clay Nanocomposites, organised by CIPET, India from01-Feb-2013 to 03-Feb-2013.

16. D.Duraibabu, S.Vinothkumar, M.Alagar and S. Ananda Kumar, "Development AndCharacterization Of Novel Ether Containing Tetraglycidyl Epoxy Clay Nanocomposites,"presented in a International level conference on APM-2013-International conference onAdvancements in polymeric materials, organised by CIPET, Luck now, India from 01-Feb-2013to 03-Feb-2013.

17. S. Ananda Kumar, , "Development of Environmentally Acceptable Waterborne Nano-HybridCoatings for the Protection of Bio-Fouling Organisms, " presented in a International levelconference on International conference on recent advances in textile and electrochemicalsciences (RATES 2013), organised by Alagappa University, Karaikudi , India from 21-Mar-2013to 23-Mar-2013.

18. "Synthesis and characterization of Novel Ether Containing Tetraglycidyl Epoxy Claynanocomposites" presented in a International level conference on 3rd Faps Polymer Congress(Macro-2013), organised by Indian Institute of Science Bangalore, INDIA from 15-May-2013 to18-Nov-2013.

19. D. Duraibabu and S. Anandakumar, "Development and characterization of anticorrosivecoatings based on a novel skeletal modified tetra functional epoxy nanocomposite " presentedin a International level conference on 17th International Conference on Composite Structures(ICCS 17), organised by FEUP, Porto,, Portugal from 17-Jun-2013 to 21-Jun-2013.

20. "Novel Skeletal Modified Tetraglycidyl Epoxy Toughened DGEBA Epoxy Matrices" presented ina International level conference on Asia – Pacific international conference (SERIA-2013) ,organised by Rajalakshmi Institutions-Chennai, India. , INDIA from 07-Aug-2013 to09-Aug-2013.

21. "Studies on nano zincoxide loaded epoxy coating on mild steel for corrosion and foulingprotection" presented in a International level conference on ICNM 13, organised by B. S. AbdurRahman University, INDIA from 05-Dec-2013 to 07-Dec-2013.

page 10 / 21


22. Suresh babu A, Anandakumar S, Saravanan R, "Preparation and Characterization of Polyvinylbutryal(PVB) Industrial leather waste Polymer composites" presented in a International levelconference on Third International Conference on Polymer Processing and Characterisation(ICPPC 2014), India; 10/2014, organised by Mahathma Gandhi University, Kottayam, Indiafrom 11-Oct-2014 to 13-Oct-2014.

23. "Mechanical performance study on polymer nano Composites manufactured usingcompression molding Process and vacuum resin infusion process" presented in a Internationallevel conference on Third International Conference on Polymer Processing andCharacterisation (ICPPC 2014), India; 10/2014, organised by Mahatma Gandhi University,Kottayam, India from 11-Oct-2014 to 13-Oct-2014.

24. B Asaithambi, G Ganesan, S Ananda Kumar , "Thermal characterization of hybridized bananaand sisal fibers reinforced PLA bio-composites" presented in a International level conferenceon THIRD INTERNATIONAL CONFERENCE ON POLYMER PROCESSING ANDCHARACTERIZATION, organised by Mahathma Gandhi University, Kottayam, India from11-Oct-2014 to 13-Oct-2014.

25. Jacob Moses Anbiah, A. Sureshbabu and S. Ananda Kumar, "Fabrication and Characterizationof Leather waste and LDPE/LLDPE blend Composites" presented in a International levelconference on International Conference on Advances in Production and Industrial Engineering(INCAPIE), organised by Trichirappalli, India from 20-Feb-2015 to 21-Feb-2015.

26. J.Premkumar, Anand Kumar Srinivasan, Tarek Saleh and Rajagopal Desikan, "NeuroprotectiveStudies on Lipoic acid - Apocyanin Conjugate and Efficient Targeted Delivery System usingBiocompatible Marix in Ischemia/Reperfusion Model" presented in a International levelconference on Neuroprotective Studies on Lipoic acid - Apocyanin Conjugate and EfficientTargeted Delivery System using Biocompatible Marix in Ischemia/Reperfusion Model,organised by VIT University, India from 23-Oct-2016 to 26-Oct-2016.

27. Vignesh, Omkumar and S. Ananda Kumar, "SCOPE OF STERCULIA FOETIDA INCOMPOSITES" presented in a International level conference on RIPE 2017 , organised byAnna University, India from 24-Mar-2017 to 25-Apr-2017.

28. S. Ananda Kumar and S. Aparna, "Fabrication of Biocide Loaded Pla Films for PackagingApplications" presented in a International level conference on ICAMDM 2018 : 20thInternational Conference on Advanced Materials Design and Mechanics , organised byInternational Science Council (World Academy of Science Engineering and Technology), SanFrancisco, U S A from 05-Jun-2018 to 08-Jun-2018.

29. Jacob Moses. A., Suresh Babu, A, Ananda Kumar.S, " Comparison of the properties ofPhenol-Formaldehyde composites reinforced with basalt fiber for brake pad applications"presented in a National level conference on National conference on Recent Advances inMaterial science and manufacturing Engineering (RAMME 2018), organised by AnnamalaiUniversity, Chidambaram, India from 15-Oct-2018 to 16-Oct-2018.

30. C.Gowsalya, R. Vanitha, C. Kavitha, S. Ananda Kumar, "Design And Development Of NaturalFiber Based Food Packaging Materials" presented in a National level conference on NationalConference on Advances in Materials and Methods of Chemistry (NCAMMC - 2019), organisedby Bharath Institute of Higher Education and Research, Tamil Nadu, India from 21-Dec-2019 to22-Dec-2019.

page 11 / 21


31. Rajiv. G,Swaathi, Dr. S. Ananda Kumar*, J. P. Nirmala, Vikas Kumar Jain, "Investigation OnImproving The Hydrophobicity And Antimicrobial Characteristics Of Poly Lactic Acid FilmLoaded With Bio-Additives For Active Food Packaging Applications." presented in a Nationallevel conference on National Conference on Advances in Materials and Methods of Chemistry(NCAMMC - 2019), organised by Bharath Institute of Higher Education and Research, TamilNadu, India from 21-Dec-2019 to 21-Dec-2019.

32. Sundar N, Johan Stanley , Ananda Kumar S*,Ghosh S, "Development and Characterisation ofBio-composite films Based on Semi-crystalline Poly Lactic Acid/ Natural waste peanut shellcarbon filler" presented in a National level conference on National Conference on Advances inMaterials and Methods of Chemistry (NCAMMC - 2019), organised by Bharath Institute ofHigher Education and Research, Tamil Nadu, India from 21-Dec-2019 to 21-Dec-2019.

33. Jacob Moses. A., Suresh Babu, A, Ananda Kumar.S, "Wear behavior ofCardanol-Formaldehyde composites reinforced with basalt Fiber for Brake pad applications"presented in a International level conference on International conference on Advancements inPolymeric Materials (APM 2019) , organised by CIPET Chennai, India from 22-Jan-2020 to24-Jan-2020.

34. Johan Stanley, N Sundar, S Ananda Kumar, "Study on Ricinoleic acid-based Polyurethane –Polylactic acid (PLA) – bio-degradable Semi-IPN for paper and wood coatings" presented in aNational level conference on Recent Research in Science (or) Social issues in Environment,organised by Dr.Sivanthi Aditanar College of Engineering, Tiruchendur , India from 29-Jul-2020to 07-Aug-2020.

35. "Design and development of a Schiff’s base modified zirconium dioxide reinforced PLAbio-composite film for industrial packaging applications" presented in a International levelconference on INTERNATIONAL VIRTUAL CONFERENCE ON ADVANCED MATERIALSFOR SUSTAINABLE DEVELOPMENT (ICAMSD-2020), organised by BANNARI AMMANINSTITUTE OF TECHNOLOGY, India from 07-Aug-2020 to 08-Aug-2020.

36. "Study on Castor oil-based Polyurethane – Polylactic acid (PLA) – bio-degradable Semi-IPN forpaper and wood coatings" presented in a International level conference on INTERNATIONALVIRTUAL CONFERENCE ON ADVANCED MATERIALS FOR SUSTAINABLEDEVELOPMENT (ICAMSD-2020), organised by BANNARI AMMAN INSTITUTE OFTECHNOLOGY, India from 07-Aug-2020 to 08-Aug-2020.

37. "Study on Polyurethane – Polylactic acid (PLA) – bio-degradable Semi-IPN for paper and woodcoatings" presented in a International level conference on International Virtual Conference onADVANCES IN CHEMICAL SCIENCES-2020, organised by SRM-EASWARI ENGINEERINGCOLLEGE, India from 13-Aug-2020 to 14-Aug-2020.

38. "Synthesis and Development of Schiff Base compounds and their polymer Modifications withPolylactic Acid (PLA) for Anti-microbial Packaging Applications " presented in a Internationallevel conference on International Virtual Conference on ADVANCES IN CHEMICALSCIENCES-2020, organised by SRM-EASWARI ENGINEERING COLLEGE, India from13-Aug-2020 to 14-Aug-2020.

Books Published

page 12 / 21


1. "Green Corrosion Chemistry and Engineering: Opportunities and challenges " authored by S.Ananda Kumar and S.Savitha and published by Wiley-VCH Verlag GmbH & Co. KGaA,Germany , Germany.(2011)

2. "Concise Encyclopedia on High Performance Silicones" authored by S. Ananda Kumar, , S.Ananda Kumar, and S. Mandhakini and published by Wiley, USA , U S A.(2014)

3. "Handbook of Polymernanocomposites. Processing, Performance and Application" authored byK. ShreeMeenakshi, S. Ananda Kumar, M. J. Umapathy and published by Springer Heidelberg,New York Dordrecht London.(2014)

4. "Eco-friendly nano-hybrid materials for Advanced Engineering Applications" authored by S.Ananda Kumar (Editor) and published by CRC Press, USA.(2016)

5. "Surface Morphological, Thermal and Dielectric Behavior of Toughened Tetraglycidyl Epoxy -POSS Nanocomposites" authored by D. Duraibabu, D. Duraibabu and S. Ananda Kumar andpublished by CRC and AA Press, USA.(2016)

6. "Binding Interaction and Morphology Studies of 3-aminopropyltriethoxysilane TreatedNanoparticles" authored by P. Saravanan, P. Saravanan and S. Ananda Kumar and publishedby CRC and AA Press, USA.(2016)

7. "Development and Characterization of POSS Reinforced Siliconized Epoxy Nanocomposites"authored by V. Madhumitha, V. Madhumitha and S. Ananda Kumar and published by CRC andAA Press, USA.(2016)

8. "Green Nano Hybrid Silver-Epoxy Eco-Friendly Coatings" authored by Manjumeena,Manjumeena and S. Ananda Kumar and published by CRC and AA Press, USA.(2016)

9. "Integration of Membrane Technology with Emerging Technologies for the Recovery ofBioactives" authored by Santhanalakshmi L, Santhanalakshmi L and Ananda Kumar S andpublished by Springer, Switzerland AG.(2021)

Sponsored Projects Completed

1. "Organic-inorganic hybrid nanocoatings for high performance applications" (September-2006 -September-2009). Project Cost: 11.80.

2. "Biocide loaded Nano-zeolite hybrid polymer coatings " (July-2006 - July-2009). Project Cost:19.25.

3. "Development and application of inorganic membranes in the treatment of wastewaterprocessing of sugarcane", funded by INDO-BRAZIL Foundation By DST (April-2009 -March-2011). Project Cost: 20.00.

4. "Development of organic-inorganic hybrid nano-coatings for speciality applications ", funded byDST-NANO MISSION (July-2010 - June-2013). Project Cost: 18.00.

5. "Development of Antifouling Composite with Functionalised Epoxy Resin" (February-2013 -July-2013). Project Cost: 0.50.

page 13 / 21


6. "Development of Porous Nanostructures Embedded Conductivity Polymer Nanocomposites foeEMI Shielding", funded by DRDO (March-2018 - February-2021). Project Cost: 2700000.00.

Programme Organized

1. Co-ordinator, National level workshop on "Polymer Technology Training Course" from23-Mar-2010 to 27-Mar-2010.

2. Co-ordinator, National level Short Course on "Faculty Development Training Program" from14-Dec-2012 to 21-Dec-2012.

3. Co-ordinator, National level Short Course on "Faculty Development Training Program" from11-Jul-2013 to 17-Jul-2013.

4. Co-ordinator, National level seminar on "Recent Advances in Chemistry" from 04-Jan-2019 to05-Jan-2019.

5. Convener, National level seminar on "Applications of Group Theory to Spectroscopy" from24-Jul-2020 to 24-Aug-2020.

Programme Attended

1. Participated in a International level conference on "Resources from researcher and end-userperspective and it's benefits" organized by Springer, India.

2. Participated in a National level conference on "Pollution abatement through technologydevelopment" organized by Department of chemistry, Anna university, India from 18-Mar-2005to 19-Mar-2005.

3. Participated in a National level workshop on "Geological Remote sensing and GIS" organizedby Department of Geology,Anna university, India from 05-Dec-2005 to 23-Dec-2005.

4. Participated in a International level workshop on "Geological Remote sensing and GIS"organized by Department of Geology,Anna university, India from 05-Dec-2005 to 23-Dec-2005.

5. Participated in a National level workshop on "Fundamental of Nanoscience and Technology"organized by Anna university, India from 18-Jan-2007 to 31-Jan-2007.

6. Participated in a National level workshop on "Introduction to Nanotechnology" organized byDepoartement of physics,Anna university, India from 30-Mar-2007 to 31-Mar-2007.

7. Participated in a National level workshop on "Mentoring youth and adolescents" organized byCEG, Anna University, India from 17-May-2007 to 17-May-2007.

8. Participated in a National level workshop on "High performance polymers" organized byChemistry Department,Anna university, India from 26-Oct-2007 to 26-Oct-2007.

9. Participated in a International level workshop on "Radiological equipment" organized by Annauniversity, India from 24-Nov-2008 to 30-Nov-2008.

page 14 / 21


10. Participated in a National level workshop on "Visible and Uv sources for solid state lighting andwater purification" organized by Crystal growth centre , Anna university, Indo-US from05-Jan-2009 to 07-Jan-2009.

11. Attended a National level Short Course on "Research guide( Science subject)" organized byBharathiar university,Coimbatore, India from 27-Jan-2009 to 31-Jan-2009.

12. Attended a National level seminar on "Recent advances in polymeric materials" organized byIIT, Madras, India from 09-Mar-2009 to 11-Mar-2009.

13. Participated in a International level workshop on "composite materials;processing challengesand opportunites" organized by NIT Tiruchirappalli, India from 13-Jul-2009 to 24-Jul-2009.

14. Participated in a National level workshop on "Environmental science and engineering"organized by Department of Rubber and Plastic technology, MIT campus, Anna University,India from 14-Dec-2009 to 20-Dec-2009.

15. Participated in a National level workshop on "ETV" organized by Educational MultimediaResearch Centre, Anna University, India from 29-Jan-2010 to 30-Jan-2010.

16. Participated in a National level workshop on "eContent Development skills for teachers"organized by Department of Media science, Anna University, India from 15-Sep-2010 to15-Sep-2010.

17. Participated in a International level workshop on "nanocoating and applications" organized byDepartment of Manufacturing Engineering, India from 30-May-2011 to 30-May-2011.

18. Participated in a International level workshop on "Recent research trends in AdvancedEngineering materials and composites and its characterization" organized by Department ofMechanical engineering, Anna university, India from 27-Mar-2012 to 28-Mar-2012.

19. Participated in a International level workshop on "composite materials" organized by Annauniversity, India from 16-May-2012 to 23-May-2012.

20. Participated in a International level workshop on "introduction to nanoscience of polymernanocomposite" organized by Madras Institute of Technology, Anna University, India from01-Jul-2013 to 07-Jul-2013.

21. Participated in a International level conference on "ICAMDM 2018 : 20th InternationalConference on Advanced Materials Design and Mechanics " organized by World Academy ofScience Engineering and Technology, San Francisco, U S A from 05-Jun-2018 to 08-Jun-2018.

22. Participated in a National level workshop on "3D Printing and design" organized by AnnaUniversity, Chennai, India from 16-Sep-2019 to 20-Sep-2019.

Special Reprasentations

1. Active Member in American Nano Society from 01-Dec-2011 to01-Dec-2013.

2. Member in Society of Chemical Industry (SCI). from 10-Apr-2020 to09-Apr-2021.

page 15 / 21


3. Active Member in National Association of Corrosion Engineers from 01-Jan-2010to01-Dec-2013.

4. Active Member in Society for Polymer Science from 01-Mar-2007 to01-Dec-2013.

Honours

1. "Senior Research Fellowship" given by Council of Scientific and Industrial Research from India(1998).

2. "Extended Senior Research Fellowship " given by Council of Scientific and Industrial Research,from India (2001).

3. "Research Associate-ship" given by Council of Scientific and Industrial Research from India(2002).

4. "postdoctoral research fellowship" given by Portuguese foundation of Science & Technologyfrom PORTUGAL (2003).

5. "Visiting Research Fellowship" given by Royal Society of UK- DST of India from UnitedKingdom (2004).

6. "Visiting Fellowship " given by European Commission Fellowship (2010).

7. "Active Researcher Award" given by Anna University from India (2014).

8. "5th National Award for Technology Innovation" given by CIPET from India (2015).

9. "Best Paper Award" given by Anna University Chennai from India (2017).

10. "Best Poster Award" given by SRM-EASWARI ENGINEERING COLLEGE from India (2020).

11. "INNOVATION AWARD 2021" given by CTDT ANNA UNIVERSITY from India (2021).

Patents Filed

1. Filed patent rights for Biodegradable barrier coating materialin India. File number: 2147483647Filed Date: 24-Aug-2021.

Experience Abroad

1. Visited Institute of Polymer and Composites, University of Minho, Portugal,, Portugal, from01-Aug-2003 to 31-Jul-2004. Purpose of visit :Post Doctoral Fellow.

2. Visited Dept. of Chemistry De Montforte University, UK , UK from 01-Aug-2004 to 31-Oct-2004.Purpose of visit :Visiting Research Fellow: (Short-term Fellowship).

3. Visited Technical University of Eindhoven, Eindhoven, The Netherlands from 23-Jun-2008 to27-Jun-2008. Purpose of visit :To deliver a lecture on Flame retardant coatings in CoatingsScience International Conference.

page 16 / 21


4. Visited University of Turin, Italy from 18-Sep-2010 to 17-Jun-2010. Purpose of visit :ErasmasMundus Fellowship.

5. Visited Alexandar Von Humboldt Foundation/ DST, Leipzig, Germany from 13-Jun-2012 to16-Jun-2012. Purpose of visit :To present posters in INDO-GERMAN FRONTIERS inENGINEERING SYMPOSIUM.

6. Visited International Conference on Advanced Materials Design and Mechanics , organised byInternational Sci, San Francisco, U S A from 05-Jun-2018 to 08-Jun-2018. Purpose of visit :Todeliver a lecture on PLA films for Packaging Applications.

Invited Lectures

1. Delivered a Lecture on "Organophosphorus flame retardant coatings" in Proceedings of thesymposium on Protective coatings organized by Technology Advancement Center, Chennai(05-Oct-2006).

2. Delivered a Lecture on "Development and characterization of phosphorus con" in CoatingsScience International Conference 2008 organized by Eindhoven University, The Netherlands(26-Jun-2008).

3. Delivered a Lecture on "Organic-inorganic hybrid nanomaterials" in National Conference onNano-biotechnology (NCBN 08) organized by Periyar Maniammai University, Thanjavur(25-Jul-2008).

4. Delivered a Lecture on "nanohybrid epoxy anti-corrosive and antifouling co" in InternationalntlConference on Polymer Processing and Characterization organized by Mahatma GandhiUniversity, Kottayam , Kottayam (11-Jan-2010).

5. Delivered a Lecture on "Nano-hybrid coatings" in One Day Workshop organized by Departmentof mechanical Engineering, Krishna Engi, Coimbatore (24-Apr-2010).

6. Delivered a Lecture on "Nanocomposites and their Processing Methods" in UGC sponsoredone day work shop SCOPE 11 organized by Annamalai University, Chidambaram(04-Mar-2011).

7. Delivered a Lecture on "Nanocomposites and Nanocoatings" in One Day Workshop inChemistry organized by KGBR College of Arts and Science, Bharathiar Unive, Coimbatore(13-Jul-2011).

8. Delivered a Lecture on "Nano-materials" in Recent Trends in Polymer Science & Technologyorganized by St. Joseph College of Engineering, Chennai (06-Sep-2011).

9. Delivered a Lecture on "Non-toxic nano hybrid coatings " in One week work shop conductedorganized by Metro Water, Chennai, Chennai (18-Nov-2011).

10. Delivered a Lecture on "Risk Management with irreversible outcome" in Indo-German Frontiesin Engineering Symposium organized by Alexandar Von Humboldt (Germany) & DST (India),Leipzig, Germany (13-Jun-2012).

page 17 / 21


11. Delivered a Lecture on "Nanocomposites and coatings" in Faculty Development Program onEngineering Chemistry organized by Anna University, CEG Campus, Chennai (21-Jun-2012).

12. Delivered a Lecture on "nano hybrid materials " in Faculty Development Program onEngineering Chemistry organized by Anna University, MIT Campus, Chennai (05-Dec-2012).

13. Delivered a Lecture on "Protective coatings" in Refresher Course organized by Metro Water,Chennai (26-Nov-2013).

14. Delivered a Lecture on "Corrosion Control Coatings and Importance on nanocomposites" inOne day program organized by Kingston Engineering College, Vellore, Vellore (24-Feb-2014).

15. Delivered a Lecture on "Pipeline Erection and Coatings" in Refresher Program to CMWSSBmembers of India organized by Chennai Metro Water, Chennai (27-Feb-2014).

16. Delivered a Lecture on "Bio Composites Recent Advances in Composite Engineering " inBRACE-2014 organized by Annamalai University, Chidambaram (11-Jul-2014).

17. Delivered a Lecture on "Development and Characterization of POSS Reinforced SiliconizedEpoxy Nanocomposites" in Third International Conference on Polymer Processing adCharacterisation (ICPPC 2014), India; 10/201 organized by Mahathma Gandhi University,Kottayam, Kerala, India (12-Oct-2014).

18. Delivered a Lecture on "Corrosion prevention by Coatings for Civil Engineerig" in One DayRefresher Program organized by Highways Engineering Department, Govt of Tamil Nad,Guindy, Chennai (15-Dec-2014).

19. Delivered a Lecture on "Role of Chemistry in the fabrication of nano materials and composites"in UGC Sponsored Program on Recent Trends in Chemistry organized by Govt. Arts College,Thiruvannamalai, Thiruvannamalai (16-Feb-2015).

20. Delivered a Lecture on "A New Ether Linked Tetraglycidyl/Diglycidyl Epoxy Blend BasedNanocomposites " in APM 2015 organized by CIPET, IISC Bangalore (20-Feb-2015).

21. Delivered a Lecture on "Corrosion of pipeline and Caotings" in Faculty development Programorganized by Metro Water , Chennai (27-Feb-2015).

22. Delivered a Lecture on "Development and Characterization of Epoxy-Polybenzoxazine Blends"in International Conference on Advanced Polymers for Science and Technology organized byVIT University, Vellore (23-Oct-2016).

23. Delivered a Lecture on "Corrosion Control" in CPHEEO Refresher Training Programme onCorrosion Control organized by Chennai Metropolitian Water Suppy and Sewerage Boa,Chennai (25-Nov-2016).

24. Delivered a Lecture on "STUDIES ON BIOCIDE REINFORCED POLY LACTIC ACID (PLA)FILM FOR PACKAGING APPLICATION" in APM 2017 organized by CIPET, Bangalore(13-Feb-2017).

25. Delivered a Lecture on "Role of Chemistry in Engineering Applications" in Recent Trends inChemistry organized by Sun Arts and Science College, Thiruvannamalai (24-Mar-2017).

page 18 / 21


26. Delivered a Lecture on "Role of nano-materials for advanced engineering applications" inNational Conference on Recent Advancements in Materials Science (NCRAMS-2017)organized by Govt Arts College, Thiruvannamalai (25-Jul-2017).

27. Delivered a Lecture on "Modern Trends in Nano Chemistry" in Innovative Research in MaterialScience -17 (IRMS-17) organized by Sri Akilandeswari College of Arts and Science ,Vandiwash (05-Oct-2017).

28. Delivered a Lecture on "Proactive coatings with cathodic protection " in Refresher Program toCMWSSB members of India organized by Chennai Metro water, CHENNAI (24-Nov-2017).

29. Delivered a Lecture on "Drug Discovery and Development" in International Symposium on"Nanotechnology- A leap in Material Science" organized by Sri Sarada College for Women,Salem (19-Jan-2018).

30. Delivered a Lecture on "Nano Science and Engineering" in International Conference on ModernInnovations in Nanotechnology Science and Engg. of Materials organized by AnnamalaiUniversity, Chidambaram (02-Feb-2018).

31. Delivered a Lecture on "Nanomaterials (Boon or Curse)" in Current Exploration on Symmetry,Organic Synthesis and Nanomaterials organized by Adiyaman College for Arts and Science forWomen, Uthangarai (25-Aug-2018).

32. Delivered a Lecture on "Current Exploration on Synthesis and Applications of Nanomaterials" inCurrent Exploration on Symmetry, Organic Synthesis and Nanomaterials organized byAdiyaman College for Arts and Science for Women, K, Uthangarai (25-Aug-2018).

33. Delivered a Lecture on "Advances in Chemistry of Materials" in INAUGURATION OFSPECTRA & ALCHEMIYA CLUBS organized by VIDHYA SAGAR WOMENâ€™S COLLEGE,CHENGALPATTU , Chelgalpattu (04-Sep-2018).

34. Delivered a Lecture on "Chemistry of Nanomaterials" in Inauguration Of Spectra & AlchemiyaClubs organized by Vidhya Sagar Womenâ€™s College, Chengalpattu, Chengalpattu(04-Sep-2018).

35. Delivered a Lecture on "Chemistry in Day to day life " in Faculty Development TrainingProgramme for Polytechnic Staff organized by National Institute for Technical TeachersResearch, Taramani, Chennai (05-Sep-2018).

36. Delivered a Lecture on "Advances in Polymer Technology" in FDTP for Polytechnic Stafforganized by National Institute for Technical Teachers Research, Taramani, Chennai-113(05-Sep-2018).

37. Delivered a Lecture on "Bio-Based Polymers" in Recent Advances in Chemistry organized byKSR Collge of Arts and Science, Thiruchengode (29-Jan-2019).

38. Delivered a Lecture on "Novel Phenolic Resin from Natural Resources" in Recent Advances inChemistry organized by KSR Collge of Arts and Science, Thiruchengode, Thiruchengode(29-Jan-2019).

page 19 / 21


39. Delivered a Lecture on "Natural Fibre Composites- Recent Technology for Sustainability andEco-Friendly Development" in AICTE Sponsored Short Term Training programme (STTP)organized by Sairam Engineering College, Chennai, Chennai (28-Jun-2019).

40. Delivered a Lecture on "RECENT TRENDS IN BIO AND NANO COMPOSITE MATERIALS" inTEQIP-III â€“ Faculty Development Program organized by Government College of Engineering,Bargur, Bargur, Krishnagiri (01-Jul-2019).

41. Delivered a Lecture on "Recent Trends in Chemistry (Nano-Materials and their applications)" inNational Seminar organized by Periyar Maniammai Institute of Science & Technolog,Thanjavur-613403 (27-Sep-2019).

42. Delivered a Lecture on "A Strategic Design Engineering for the Fabrication of Bio-BasedIndustrial Products for Sustainable Environment" in Recent Trends in Materials Frontiersorganized by St. Joseph College of Engineering, Chennai (29-May-2020).

43. Delivered a Lecture on "Bio-Based Polymers and their Industrial Applications" in NationalWebinar organized by SRM TRP EngineeringCollege, Trichy (03-Jun-2020).

44. Delivered a Lecture on "Sustainable Nano Materials for Future" in COVID 19 in the eyes ofChemistry and Sustainable Nano Materials for Future organized by KSR College of Arts andScience, Thiruchengode (09-Jun-2020).

45. Delivered a Lecture on "Bio-Based Polymers and Composites for Sustainable Future" inInternational Virtual Conference on ADVANCES IN CHEMICAL SCIENCES-2020 organized bySRM-EASWARI ENGINEERING COLLEGE, Chennai (14-Aug-2020).

46. Delivered a Lecture on "Science and Technology of Nanomaterials" in INTERNATIONALVIRTUAL FACULTY DEVELOPMENT PROGRAMME ON RECENT TRENDS ON CURRENTSCIENCE AND TECHNOL organized by EASWARI ENGINEERING COLLEGE, Chennai(28-Aug-2020).

47. Delivered a Lecture on "Nano-hybrid coatings and composites" in one day webinar organizedby Krishnnamal College for Women, Coimbatore (01-Oct-2020).

48. Delivered a Lecture on "Screening of Soil for Bio-synthesis and its Application for 3D printing"in Webinar on Material Science organized by Endevour Research Pvt Ltd, Virtual(04-Dec-2020).

49. Delivered a Lecture on "A green Strategic Engineering For Bio-based Products" inAdvancements in Polymeric Materials (APM 2021) organized by Central Institute ofPetrochemical Engineering and, Virtual (09-Mar-2021).

50. Delivered a Lecture on "High Functionality Epoxy Nano composites " in International VirtualConference on ADVANCES IN CHEMICAL SCIENCES - 2020 organized by InovSciTech andOrganizing Committee, Virtual (25-Mar-2021).

51. Delivered a Lecture on "A green strategic design engineering for the fabrication of bio-basedindustrial materials" in Global Conference on Advances in Polymer Science andNanotechnology organized by Peers Alley Media: 1126 59 Ave East, V5X 1Y9, Vanc, Virtual(28-May-2021).

page 20 / 21


52. Delivered a Lecture on "Bio-based Polymers and Their Blends for Advanced EngineeringApplications" in Five DayVirtual Faculty Development Program on Advances in ChemicalResearch organized by Dr. NGP Institute of Technology, Coimbatore (25-Jun-2021).

53. Delivered a Lecture on "The Role of Bio-polymers for Advanced Engineering Applications" inNational Webinar organized by GURU NANAK COLLEGE, Chennai (28-Jul-2021).

54. Delivered a Lecture on "Bio-Polymers and Their Blends for Bio-Medical Applications" in FiveDay Virtual Faculty Development Program on Advances in Clinical Research organized byChettinad Academy of Research & Education , Chennai (10-Aug-2021).

55. Delivered a Lecture on "Bio-polymer screening from soil" in ISTMAE-2021 organized byâ€œ3rd Global Conference & Expo on Materials Scien, Netherlands (28-Aug-2021).

Extension & Outreach Programme

1. Coordinator, Polymer Technology Training Program 2010, and funded by Anna University andVarious Industries at Department of Chemistry during 23-Mar-2010 and 27-Apr-2013. No. ofparticipants: 120.

2. Coordinator, Faculty Development Training Program in Engineering Chemistry, and funded byCentre for Faculty Developmet, Anna University at Department of Chemistry during14-Dec-2012 and 21-Dec-2012. No. of participants: 25.

3. Coordinator, Faculty Development Training Program, and funded by Centre for FacultyDevelopment at Department of Chemistry during 11-Jul-2013 and 18-Jul-2013. No. ofparticipants: 25.

4. National Advisory Committee Member, THIRD INTERNATIONAL CONFERENCE ONPOLYMER PROCESSING AND CHARACTERIZATION, and funded by ICPPC at MahatmaGandhi University, Kotttayam during 11-Oct-2014 and 13-Oct-2014. No. of participants: 100.

5. National Advisory Committee Member in National Conference en, ADVANCES INFUNCTIONAL MATERIALS (NCAFM-2017), , participated by Multi-disciplenary and funded bySt.Joseph College of Engineering at NAFEM-2017 during 05-Aug-2017 and 06-Aug-2017. No.of participants: 100.

6. National Advisory Committee member, 2nd National Conference on Emerging Trends inChemistry and Materials 2017, participated by Multi-disciplenary and funded by ThiruvalluvarUniversity, Serkkadu at Thiruvalluvar University, Serkkadu during 10-Aug-2017 and11-Aug-2017. No. of participants: 100.

7. Co-ordinator, Recent Advances in Chemistry, participated by Multi-discipline and funded byUGC at Anna University, Chennai-600025 during 04-Jan-2019 and 05-Jan-2019. No. ofparticipants: 125.

Powered by TCPDF (www.tcpdf.org)

page 21 / 21

http://www.tcpdf.org

Dr. Ananda Kumar - AUKDC

Documents

Transcript of Dr. Ananda Kumar - AUKDC