DISCLAIMER This tender is not an offer by the All India ...
-
Upload
khangminh22 -
Category
Documents
-
view
1 -
download
0
Transcript of DISCLAIMER This tender is not an offer by the All India ...
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 1 of 44
DISCLAIMER
This tender is not an offer by the All India Institute
of Medical Sciences, Raipur, but an invitation to receive
offer from bidders/firm/agency etc. No contractual
obligation whatsoever shall arise from this tender
process unless and until a formal contract is signed and
executed by duly authorised officers of AIIMS, Raipur
with the selected bidder/firm/agency.
All India Institute of Medical Sciences, Raipur
G.E. Road, Tatibandh, Raipur– 492099,Chhattisgarh
Tele: 0771- 2971307, email: [email protected]
Website: www.aiimsraipur.edu.in
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 2 of 44
Notice Inviting Tender
For
“One Year Rate Contract for Dental Consumable Item from ECL for
DENTISTRY Department”
At
All India Institute of Medical Sciences, Raipur
CRITICAL DATE SHEET
Published Date 10/06/2019 06:00 pm
Bid Document Download / Sale Start
Date 11/06/2019 10:00 am
Clarification Start Date 11/06/2019 10:00 am
Clarification End Date 24/06/2019 03:00 pm
Pre bid meeting 24/06/2019 03:30 pm
Bid Submission Start Date 26/06/2019 10:00 am
Bid Submission End Date 08/07/2019 06:00 pm
Bid Opening Date 10/07/2019 03:30 pm
Tender document cost Exempted as per GFR - 2017
EMD cost ₹ 3,00,000.00/-
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 3 of 44
I. NOTICE INVITING TENDER
1. Online bids are invited on single stage two bid system from Reputed, Eligible and
Qualified Tenderer agencies to enter into Annual rate contract for Dental
Consumable item from ECL. Manual bids shall not be accepted.
2. Tender document may be downloaded from AIIMS, Raipur web site
www.aiimsraipur.edu.in (for reference only) and CPPP site
https://eprocure.gov.in/eprocure/app as per the schedule as given in CRITICAL DATE
SHEET.
3. Bid shall be submitted online at CPPP website: https://eprocure.gov.in/eprocure/app.
4. Bid documents may be scanned with 100 dpi with black and white option which helps in
reducing size of the scanned document.
5. Tenderer who has downloaded the tender from the AIIMS, Raipur web site
www.aiimsraipur.edu.in and Central Public Procurement Portal (CPPP) e-Procurement
website https://eprocure.gov.in/eprocure/app shall not tamper/modify the tender
form including downloaded price bid template in any manner. In case if the same is
found to be tempered/modified in any manner, tender shall be completely rejected and
EMD would be forfeited and tenderer is liable to be banned from doing business with
AIIMS Raipur.
General Terms and Conditions:-
1. Manual bid shall not be accepted in any circumstance.
2. The complete bidding process in online bidding, Bidder should be possession of valid
Digital Signature Certificate (DSC) for online submission of bids. Prior to bidding DSC
need to be registered on the website mentioned above.
3. Tenderers are advised to follow the instructions provided in the „Instructions to the
Tenderer for the e-submission of the bids online through the Central Public
Procurement Portal for e Procurement at https://eprocure.gov.in/eprocure/app.
4. Quotations/Bid should be valid for 180 days from the tender due date i.e. tender
opening date. The bidder should clearly indicate the period of delivery & warranty terms
etc. whichever is applicable
5. The Tender/Bid will be opened online at website https://eprocure.gov.in/eprocure/app
on Store office at AIIMS Raipur Premises at the time of bid opening.
6. AIIMS Raipur reserves the rights to accept/reject any bid in full or in part or accept
any bid other than the lower bid without assigning any reason thereof. Any bid
containing incorrect and incomplete information shall be liable for rejection.
7. The Tender/Bid will be opened online at website https://eprocure.gov.in/eprocure/app
in Stores office at AIIMS Raipur Premises at the time of bid opening.
i. Only those financial bids will be opened whose technical bids are found suitable
by the expert committee appointed for the scrutiny of the tender.
ii. No separate information shall be given to individual bidders. In incomparable
situation, the committee may negotiate price with the technically and financially
qualified bidder before awarding the bid.
8. Tenderer to submit the scanned Copies of original documents (with technical bid) defining
the constitution or legal status, place of registration and principal place of business of the
company or firm or partnership, etc.
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 4 of 44
9. The competent authority reserves all rights to reject the service if the same are not found
in accordance with the required description / quality.
10. All the rates should be mentioned in Indian National Currency (INR) only. The rates
quoted in foreign currency will not be entertained in this tender enquiry & such
quotations will be cancelled straightway
11. Rates quoted should be inclusive of all applicable taxes etc. at FOR AIIMS Raipur. Tenderer must mention taxes/duties clearly.
12. The delivery of the items will have to be made at AIIMS, Raipur. No transportation/cartridge charges will be provided for the same.
13. Delivery of material should be made on working days from 9.00 AM to 4.30PM (Monday to Friday) and Saturday 9:00AM to 12:30 PM only.
14. Unloading of material will be arranged by supplier. 15. The tender document must be accompanied by copy of PAN, Certificate of
firm/company registration and GST. 16. The quotations should be given for the items in the same order as in the tender
document. 17. This is the Rate Contract, hence actual quantity may vary as per demand of the
Institute at the time of placement of order. 18. The Vendor must be able to provide the product / items within specified time period as
prescribed in the Purchase Order. Failing which the EMD will be forfeited. Furthermore on completion of the stipulated time period, Purchase Order may be cancelled and award may be given to another qualified bidder in negotiated terms & conditions.
19. All disputes shall be subject to Raipur Jurisdiction only. 20. The place of arbitration and the language to be used in arbitral proceedings shall be
decided by the arbitrator. 21. In the event of any dispute or difference(s) between the AIIMS Raipur and the vendor(s)
arising out of non-supply of material or supplies not found according to the specifications or any other cause whatsoever relating to the supply or purchase order before or after the supply has been executed, shall be referred to the concerned authority of AIIMS Raipur who may decide the matter himself or may appoint arbitrator(s) under the arbitration and conciliation Act 1996. The decision of the arbitrator shall be final and binding on both the parties.
22. Full description & specifications, make/brand and name of the manufacturing firm must be clearly mentioned in the tender, failing which the tender will not be considered.
23. AIIMS Raipur reserves the rights to accept/reject any offer in full or in part or accept any offer other than the lowest offer without assigning any reason
thereof. Any offer containing incorrect and incomplete information shall be liable for rejection.
24. In case the supplier requires any elucidation regarding the tender documents, they are requested to contact to the Stores Officer, AIIMS Raipur through e-mail [email protected] on or before 00-00-2019 at 3:00 PM. and Earnest Money Deposit (EMD) in form of demand draft Pay Order of ₹ 3,00,000.00/- towards refundable EMD from a Schedule bank in favour of “All India Institute of Medical Sciences, Raipur” payable at Raipur and scanned image to be uploaded with technical bid. The demand draft should be valid for 90 days (Demand Drafts must be complied with CTS 2010 standards prescribed by Reserve Bank of India). Without the EMD the bid will not be considered. The EMD of the successful bidder will be returned to them without any interest after completing the successful execution of Agreement. The earnest money of unsuccessful bidders will be returned to them without any interest after awarding the offer.
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 5 of 44
II. Other Terms and Conditions
1. Earnest Money:-
S.No. Name of the Items EMD
1 Item Sr. No. 1-317 as per
Annexure-I
₹ 3,00,000.00/
Earnest money (i.e.₹ ₹ 3,00,000.00) by means of a Bank Demand Draft/ FD, a scanned copy to be enclosed. It is also clarified that the bids submitted without earnest money will be summarily rejected. The DD/FD may be prepared in the name of "All India Institute of Medical Sciences, Raipur (AIIMS RAIPUR)". The EMD cost must reach at officer of the Stores Officer Gate no.1, Ayush PMR Building, 2nd Floor Room no. 51 AIIMS, Raipur before opening of tender. i) No request for transfer of any pervious deposit of earnest money or security deposit or payment of any pending bill held by the AIIMS Raipur in respect of any previous supply will be entertained. Tenderer shall not be permitted to withdraw his bid or modify the terms and conditions thereof. In case the tenderer fail to observe and comply with stipulations made herein or backs out after quoting the rates, the aforesaid amount of earnest money will be forfeited.
ii) Tenders without Earnest Money or Tender cost will be summarily rejected.
iii) No claim shall lie against the AIIMS Raipur in respect of erosion in the value or interest on the amount of EMD. iv) If MSME firm is registered for above tendered item, then the firm will be exempted for submission of
EMD amount. Firm must upload scanned copy of following documents in support of exemption.
(1) National Small Industries Corporation (NSIC).
(2) Directorate of handicraft & Handlooms. v) The earnest money will be returned/refund to the unsuccessful tenderers after the tender is decided. vi) EMD should remain valid for a period of 1 year beyond the final bid validity period. When the tenderer agrees to extend the validity of bid, he shall also extend the validity of EMD suitably.
2. Experience:- Tenderer must provide evidence of having supplied to government
hospital / reputed private hospital organizations in India for similar nature of items i.e.
minimum ₹ 1,00,00,000.00/- Consumable Item for minimum experience is completed in
one year in the last three years i.e. 2016-17, 2017-2018, 2018-2019.
3. Turnover:- The firm should be registered and the bidder should have the average
annual turnover of minimum ₹1, 50,00,000.00/- for in the last three financial years i.e.
2016-17, 2017-2018, 2018-2019. Copies of authenticated balance sheet for the last three
financial years should be submitted.
4. Signing of Tender:
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 6 of 44
All the duly filled/completed pages of the tender should be given serial /page number on
each page and signed. The individual signing the tender or other documents connected
with contract must specify whether he sign as:
a) A sole proprietor of the concern or constituted attorney of such sole proprietor;
b) A partner of the firm, if it is a partnership firm in which case he must have authority to execute the contracts on behalf of the firm and to refer to arbitration disputes concerning the business of the partnership either by virtue of the partnership agreement or by a power of attorney duly executed by the partners of the firm.
c) Director or a principal officer duly authorized by the Board of Directors of the Company, if it is a company.
5. N.B.
In case of partnership firms, a copy of the partnership agreement, or general power of
attorney duly attested by a Notary Public, should be furnished on stamped paper duly
sworn or affirmed by all the partners admitting execution of the partnership agreement or
the general power of attorney. The attested copy of the certificate of registration of firm
should also be enclosed along with the tender.
i. In the case of partnerships firm, where no authority to refer disputes concerning the
business of partnership firm has been conferred on any partner, the tender and all other
related document must be signed by all partners of the firm.
ii. A person signing the tender form or any document forming part of the tender on behalf
of another person should have an authority to bind such other person and if, on
enquiry it appears that the person so signing had no authority to do so, AIIMS, Raipur
may without prejudice, cancel the contract and hold the signatory liable for all costs,
consequences and damages under the civil and criminal remedies available.
iii. The tenderer should sign and affix his firm’s stamp at each page of the tender and
all its annexure as the acceptance of the offer made by tenderer will be deemed as a
contract and no separate formal contract will be drawn. NO PAGE SHOULD BE
REMOVED/ DETACHED FROM THIS NOTICE INVITING TENDER.
6. Pre–Qualification Criteria:
a. Bidders should be the manufacturer / authorized dealer. Letter of Authorization from Manufacturer on the same and specific to the tender should be enclosed.
7. Performance Guarantee Bond:
a. The successful bidder shall have to submit a performance guarantee (PG) within 30 days from the date of issue of Letter of Award (LOA). Extension of time for submission of PG beyond 30 days band up to 60 days from the date of issue of LOA may be given by the competent authority to sign the contract agreement however a panel interest of 15% per annum shall be charged for the delay beyond 30 days. i.e. 31st day after the date of issue of LOA. In case of the contract fails to submit the requisite PG even after 60 days from the date of issue of LOA the contract shall be terminated duly forfeiting the EMD and other dues if any payable against the contract . The failed contractor shall be debarred from participating in re-tender (if any) for that item. Performance Guarantee Bond is mandatory.
b. Successful supplier/firm should submit performance guarantee as prescribed in favour of “AIIMS, Raipur” and to be received in the Gate no.1 Store Office, 2nd Floor, Ayush PMR Building, Room no. 56 Tatibandh, Raipur (C.G) Pin-492099 before the date of commencement of supply or 30 days from the date of acceptance of the purchase order, whichever is earlier. The performance guarantee bond to be furnished in the form (as per form C) of Bank Guarantee as per given Proforma of the tender documents, for an amount covering 10% of the contract value.
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 7 of 44
c. The Performance Guarantee should be established in favour of “AIIMS Raipur” through
any Schedule Bank with a clause to enforce the same on their local branch at Raipur.
D Validity of the performance guarantee bond shall be for a period of 60 days beyond entire contract period
e. After completing of warranty period a fresh BG/DD/FDR of 10% of CMC cost will be submitted by the supplier for performance security against CMC validity of this new BG/DD/FDR will be 60 days beyond CMC period. After submission of new security deposit, old security deposit will be released.
,,,
8. Penalty:
If the suppliers fails to deliver and place any or all the items or perform the service by the specified date as mention in purchase order, penalty at the rate of 0.5% per week of the delayed value of goods subject to the maximum of 10% of delayed goods value will be deducted.
9. Validity of the bids:
The bids shall be valid for a period of 180 days from the date of opening of the tender.
This has to be so specified by the tenderer in the commercial bid which may be extended,
if required.
10. Right of Acceptance:
AIIMS, Raipur reserves the right to accept or reject any or all tenders/quotations without
assigning any reason there of and also does not bind itself to accept the lowest quotation
or any tender. AIIMS, Raipur also reserves the rights to accept all the items in the given
tender or only part of it in any given schedule without assigning any reason.
11. Communication of Acceptance:
AIIMS, Raipur reserves all right to reject any tender including of those tenderers who fails to comply with the instructions without assigning any reason whatsoever and does not bind itself to accept the lowest or any specific tender. The decision of this Institute in this regard will be final and binding.
12. Expiry Period:
Items which are mentioned in Annexure- I should have a minimum expiry of 1 year
from the date of supply.
13. Duration of Contract:
The duration of Rate Contract for Consumable Item shall be one year, which may be
extendable for another one year by mutually agreed demand by Director AIIMS, Raipur.
14. Force Majeure: If, at any time during the subsistence of this contract, the performance in whole or in part by
either party of any obligation under this contract is prevented or delayed by reasons of any
war or hostility, act of public enemy, civil commotion, sabotage, fire, floods, exception,
epidemics, quarantine restriction, strikers lockout or act of God (hereinafter referred to as
events) provided notice of happening of any such eventuality is given by party to other within
21 days from the date of occurrence thereof, neither party hall by reason of such event be
entitled to terminate this contract nor shall either party have any claim for damages against
other in respect of such non-performance or delay in performance and deliveries have been so
resumed or not shall be final and conclusive.
Further, that if the performance in whole or in part of any obligation under this contract is
prevented or delayed by reason of any such event for a period exceeding 60 days, AIIMS,
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 8 of 44
Raipur party may, at least option to terminate the contract.
15. Insolvency etc.:
In the event of the firm being adjudged insolvent or having a receiver appointed for it by a
court or any other under the Insolvency Act made against them or in the case of a
company the passing any resolution or making of any order for winding up, whether
voluntary or otherwise, or in the event of the firm failing to comply with any of the
conditions herein specified AIIMS, Raipur shall have the power to terminate the contract
without any prior notice.
16. Breach of Terms and Conditions
In case of breach of any terms and conditions as mentioned above, the Competent
Authority, will have the right to cancel the work order / job without assigning any reasons thereof and nothing will be payable by AIIMS, Raipur. In that event the security deposit shall also stand forfeited.
17. Arbitration:
If any difference arises concerning this agreement, its interpretation on payment to the
made there under, the same shall be settled out by mutual consultation and negotiation.
If attempts for conciliation do not yield any result within a period of 30 days, either of the
parties may make a request to the Director, AIIMS, Raipur to settle the dispute by Sole
Arbitrator. Sole arbitrator will be appointed by the Director, AIIMS, Raipur. In case of such
arbitrator refusing, unwilling or becoming incapable to act or his mandate having been
terminated under law, another arbitrator shall be appointed in the same manner from
among the panel of three persons to be submitted by the claimant. The provision of
Arbitration and Conciliation Act, 1996 and the rule framed there under and in force shall
be applicable to such proceedings.
18. Right to call upon information regarding status of work:
The AIIMS, Raipur will have the right to call upon information regarding status of
work/job at any point of time.
19. Subletting of Work:
The firm shall not assign or sublet the work/job or any part of it to any other person or party without having first obtained permission in writing of AIIMS, Raipur, which will be at liberty to refuse if thinks fit. The tender is not transferable. One tenderer shall submit only one tender.
20. Terms of payment:
1. The payment would be made for actual supply taken and no claim in this regard shall be
entertained. 100% payment will be made after receipt and acceptance of materials.
2. No payment shall be made for rejected Stores. Rejected items must be removed by the supplier within two weeks of the date of issue of rejection advice at their own cost & replace immediately. In case these are not removed these will be auctioned at the risk and responsibility of the suppliers without notice.
3. Tenderer should submit 03 copies of pre-receipted invoice in original along with the packing list/delivery challan and other relevant documents on the time of payment (if required).
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 9 of 44
21. Fall Clause:
1. Prices charged for supplies of the above items by the supplier should in no event exceed
the lowest prices at which he offers to sell or sells the stores of identical description to any
other Govt. Medical Institutes/State Government/DGS&D /Public Undertaking during the
period of the contract.
2. If at any time during the period of contract, the prices of tendered items is reduced or
brought down by any law or Act of the Central of State government, the supplier shall be
bound to inform Purchasing Authority immediately about such reduction in the
contracted prices, in case the supplier fails to notify or fails to agree for such reduction of
rates, the Purchasing authority will revise the rates on lower side. If there is a price
increase for any product after quoting the rates, the bidder will have to supply the item as
per quoted rates. This office will not accept any higher rates after wards.
3. If at any time during the period of contract, the supplier quotes the sale price of such
goods to any other State Govt. /DGS&D and Pubic Undertakings at a price lower than the
price chargeable under the rate contract he shall forthwith notify such reduction to
Purchasing Authority and the prices payable the items supplied from the date of coming
into force of such price stands correspondingly reduced as per above stipulation.
Any deviation in the material and the specifications from the accepted terms may liable to
be rejected and the suppliers need to supply all the goods in the specified form to the
satisfaction / specifications specified in the Purchase order and demonstrate at the their
own cost.
22. Legal Jurisdiction: The agreement shall be deemed to have been concluded in Raipur, Chhattisgarh and all
obligations hereunder shall be deemed to be located at Raipur, Chhattisgarh and Court
within Raipur, Chhattisgarh will have Jurisdiction to the exclusion of other courts.
23. Quantity:
This is rate contract hence it may be varied (Increase/Decrease) as per demand of institute
at the time of placing the order.
24. IMPORTANT POINTS FOR QUOTING PRICES:- The Bidder should also kept
following points in mind during offering his price quotation against this Tender
Enquiry:-
(i) No increase in quoted price and change in quality of product will be allowed during the
validity of the entire Rate Contract period or any extended Contract Period.
(ii) Bidder will quote firm rates inclusive of all Taxes & expenditure up to F.O.R. to AIIMS
Raipur basis. Rates should be according to a unit e.g. cost per unit (as asked in the
Schedule of Requirement i.e. Kg/Ltr/Vial/Each/Kit/Item etc. which so ever applicable
with clearly mentioning its pack size, preferably as per asked pack size) and not in any
other form. Quoting of rates in variation to the prescribed unit will authorize the
Competent Authority to cancel the quotation without any information to the bidder.
(iii) No item should be quoted with price more than the M.R.P. The prices should be quoted
strictly in accordance with unit/quantity mentioned in the Financial Bid format.
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 10 of 44
25. PACKING & MARKING OF SUPPLIES:-
a) All primary packing container/Strips/blister should be strictly confirming to the
specification include in the relevant pharmacopoeia packing should be able to prevent
damage or deterioration during transit. The label in the case of injectable should clearly
indicate whether the preparation meant for Intravenous (IV), Intramuscular (IM)
Subcutaneous (S.C) etc.
b) Primary packing such as, label, inner, carton, outer, etc. should bear the following words.
“Govt Supply-Not for sale”
“……………..आपूर्ति नि:शुल्क नििरण हिेु” Secondary packing such as baby shipper (small corrugated box) outer corrugated boxed
are labelled as under
26. Transit risk on firm’s account.
Stores Officer (H)
AIIMS, Raipur(C.G.)
GOVT SUPPLY NOT FOR SALE
Name of Item:
Manufacture by:
Batch No:
Mfg Date:
Exp. Date:
Quantity:
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 11 of 44
Chapter – III
Form A
PARTICULARS TO BE FILLED BY THE BIDDER
1. Name of the Supplier : _____________________________________
2. Complete Address of the Supplier :_________________________________________
3. Availability for demonstration of items at AIIMS Raipur. Yes/No [Please√]
4. Earnest Money Deposit enclosed: Yes/No [Please√] if Yes,
a.) Name of the Bank : _______________________
b.) Amount in (Rs.) : _______________________
c.) Demand Draft No. : _______________________
d.) Validity date of the enclosed DD/FDR : _______________________
5. Communication details of the concerned contact person to whom all references shall be made regarding this tender enquiry.
[NOTE: Any changes after submission of Tender documents kindly update AIIMS Raipur]
a.) Full Name : _______________________________________
b.) Complete Postal Address : _______________________________________
c.) Telephone No. : _______________________________________
d.) Fax No. : _______________________________________
e.) Mobile No. : _______________________________________
f.) E-mail : _______________________________________
g.) Website Address : ______________________________________
Note: - Demand Drafts must be complied with CTS 2010 standards prescribed by Reserve Bank of India.
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 12 of 44
Form B
PARTICULARS FOR REFUND OF EMD TO SUCCESSFUL/UNSUCESSFUL BIDDER
RTGS / National Electronic Fund Transfer (NEFT) Mandate Form
1. Name of the Bidder
2. Permanent Account No(PAN)
3.
Particulars of Bank Account
a) Name of the Bank
b) Name of the Branch
c) Branch Code
d) Address
e) City Name
f) Telephone No
g) NEFT/IFSC Code
h) RTGS Code
i) 9 Digit MICR Code appearing on the cheque book
j) Type of Account
k) Account No.
4. Email id of the Bidder
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 13 of 44
Form C
PERFORMANCE STATEMENT
Proforma for Performance Statement (For period of last three years)
Name of Firm
_____________________________________________________________________
Order placed by (Complete Address of Purchaser)
Purchase Order No. &
Date
Description and
Quantity of ordered items
Value of order
Date of completion of delivery
Remarks indicating
Reasons for late delivery,
if any
As per Contract
Actual date of supply
1 2 3 4 5 6 7
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 14 of 44
Form-D
CHECKLISTS FOR SUPPLY OF CONSUMABLE ITEM
Checklist-Technical Offer
S.N
o.
Particulars
Required Scanned copy
to be attached with
online Technical Bid
1
a) Details as required in the tender document (i.e.
Supplier/firm is manufacturer/ authorized dealer/ sole
distributor certificate.
b) Authorization certificate from the manufacturer in case of
dealer / distributor.
c) Copy of PAN
d) Certificate of firm/company registration
e) GST registration certificate.
f) Income Tax Return of last three financial years i.e. 2016-17,
2017-2018, 2018-19
g) Tenderer must provide experience/ supplied as per the
clause 2.(Chapter-II)
h) Annual Turnover & balance sheet of last three years i.e.
2016-17, 2017-2018, 2018-19 duly certified by C.A. as per
the clause 3.(Chapter-II)
i) Tenderer must provide a certificate on letter head that
proprietor/firm has never been black listed by any
organization.
j) Tenderer must provide an affirmation on letter head that
they have not quoted the price higher than previously
supplied to any government Institute / Organisation /
reputed Private Organisation
or DGS&D rate in recent past.
2. Technical Specifications Compliance Report (if applicable)
3. Duly filled Form – A, Form –B & Form –C, Form – D with
required documents with proper page numbering and
indexing of required Documents.
4. Financial Bid (Price Bid) Submitted
Note:
i. In case of non-fulfilment of any of the above information/ document(s), the Tender
will be summarily rejected without giving any notice.
(Dated Signature of the Tenderer with stamp of firm)
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 15 of 44
SPECIAL CONDITIONS
1. In case, even after allocating the order, the supplied material is found to be of suboptimal quality or the flow of supply is not regular, the purchaser in benefit of patient service, reserves the right, to reallocate the supply to next participant.
2. The bidders should submit the relevant certificates/ evidence of previous supply to other hospitals. In order to justify the rates quoted.
3. The bidder should not have been blacklisted before. 4. The bidders shall also provide representative samples of their Consumable items to the
concerned committee regarding the quality aspect. 5. The quantity indicated is tentative and may vary, and any decision in this regard by
Director AIIMS Raipur shall be final. 6. Delivery Mode: Delivery at AIIMS Raipur, at site only on FOR destination basis. 7. Total bid price should be inclusive of all taxes and levies, etc. 8. Delivery Period: within 15 days after issue of PO. 9. Quotation Validity Date: - Minimum 180 Days from the date of Submission of
quotation/tender. 10. Quantity may be revised as per requirement.
Sign of bidder: -
Date: -
Name of the bidder:-
Firm’s Name:-
DATE: SIGNATURE WITH NAME AND SEAL OF THE FIRM
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 16 of 44
MANUFACTURER‟s / PRINCIPAL‟s AUTHORIZATION FORM
(Chapter III, Form D- Point No. 1 (b) of the tender)
To
The Store Officer, All India Institute of Medical Sciences Raipur
Dear Sir,
TENDER: __________________________________________________.
We, ______________________________________, who are
established and reputable manufacturers of ________________, having
factories at __________________ and____________________, hereby
authorize M/s _______________________ (name and address of agents) to bid, negotiate
and conclude the contract with you against
Tender No.__________________ for the above goods manufactured by
us. No company or firm or individual other than M/s
_________________________ are authorized to bid, negotiate and
conclude the contract in regard to this business against this specific
tender.
We hereby extend our full guarantee and warranty as per the conditions
of tender for the goods offered for supply against this tender by the above
firm.
The authorization is valid up to __________________________________ ______________________
Yours faithfully,
(Name)
For and on behalf of M/s. ___________
(Name of manufacturers)/Principal.
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 17 of 44
PARTICULARS FOR PERFORMANCE GUARANTEE BOND
(To be typed on Non-judicial stamp paper of the value of Indian Rupees of Two Hundred) (TO BE
ESTABLISHED THROUGH ANY OF THE SCHEDULED BANK (WHETHER SITUATED AT RAIPUR OR
OUTSTATION) WITH A CLAUSE TO ENFORCE THE SAME ON THEIR LOCAL BRANCH AT RAIPUR.
BONDS ISSUED BY CO- OPERATIVE BANKS ARE NOT ACCEPTED.)
To,
The Director
All India Institute of Medical Sciences (AIIMS),
Tatibandh, GE Road, Raipur-492 099 (C.G.)
LETTER OF GUARANTEE
WHEREAS All India Institute of Medical Sciences (AIIMS) Raipur (Buyer) have invited Tenders vide
Tender No............................... Dt........................... for purchase of
....................................................................... AND WHEREAS the said tender document requires the
supplier / firm (seller) whose tender is accepted for the supply of instrument / machinery, etc. in
response thereto shall establish an irrevocable Performance Guarantee Bond in favour of “AIIMS
Raipur” in the form of Bank Guarantee for Rs............................. [10% (ten percent) of the purchase
value] which will be valid for entire warranty period from the date of acceptance, the said Performance
Guarantee Bond is to be submitted within 30 (Thirty) days from the date of Acceptance.
NOW THIS BANK HEREBY GUARANTEES that in the event of the said supplier/firm (seller) failing to
abide by any of the conditions referred to in tender document / purchase order/ performance of the
instrument / machinery/ Consumables, etc. this Bank shall pay to All India Institute of Medical
Sciences (AIIMS) Raipur on demand and without protest or demur Rs .....................
(Rupees...................................................).
This Bank further agrees that the decision of All India Institute of Medical Sciences (AIIMS) Raipur
(Buyer) as to whether the said supplier/firm (Seller) has committed a breach of any of the conditions
referred in tender document / purchase order shall be final and binding.
We, ......................................................... (name of the Bank & branch) hereby further agree that the
Guarantee herein contained shall not be affected by any change in the constitution of the
supplier/firm (Seller) and/ or All India Institute of Medical Sciences (AIIMS) Raipur (Buyer).
Notwithstanding anything contained herein:
a. Our liability under this Bank Guarantee shall not exceed Rs...............................(Indian Rupees
.................................................................only).
b. This Bank Guarantee shall be valid up to ...............................(date) and
c. We are liable to pay the guaranteed amount or any part thereof under this bank guarantee only and
only if AIIMS Raipur serve upon us a written claim or demand on or before............................(date)
This Bank further agrees that the claims if any, against this Bank Guarantee shall be enforceable at
our branch office at .................................................................. situated
at.................................................................……………(Address of local branch).
Yours truly,
Signature and seal of the Guarantor
Name of the Bank:................................................................
Complete Postal Address: ...................................................
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 18 of 44
Annexure - I
Technical Specification of Consumable Item
S.No
.
Name of the Consumable
Item Detailed product specification
Purpose/
Justification
Preferred
Make/Brand Unit/ Pack
1 22 gauge stainless steel wire
0.02007 inch / 0.51 mm,
Annealed, soft stainless steel
wire
Dental Wiring Smith or
Equivalent Roll of 10 gm
2 24 gauge stainless steel wire
0.0201 inch / 0.51054 mm,
Annealed, soft stainless steel
wire
Dental Wiring Smith or
Equivalent Roll of 10 gm
3 26 gauge stainless steel wire
0.0159 inch / 0.40386 mm,
Annealed, soft stainless steel
wire
Dental Wiring Smith or
Equivalent Roll of 10 gm
4 28 gauge stainless steel wire
0.0126 inch / 0.32004 mm,
Annealed, soft stainless steel
wire
Dental Wiring Smith or
Equivalent Roll of 10 gm
5
Super soft putty (vinyl
polysiloxane impression
material)
Super soft putty (aquasil) with
base and catalyst, vinyl
polysiloxane impression
material
Dental
Impression
3M ESPE or
Equivalent
1 base+ 1
catalyst/box
6 Acid etchant for composite
resin (3M ESPE)
Low viscocity, gel like
consistency, 5% / 10%
Hydrofluric acid
Dental
Restoration
Dentsply or
Equivalent 1 syringe/pkt
7 Addition silicone- putty
consistency
Super soft putty (aquasil) with
base and catalyst, vinyl
polysiloxane impression
material
Dental
Impression
Dentsply or
Equivalent
450ml base,
catalyst(each)
99 venile
8 Addition silicone- regular
body consistency
Super soft putty (aquasil) with
base and catalyst, vinyl
polysiloxane impression
material in syringe
from/cartridge
Dental
Impression
Dentsply or
Equivalent
50mlx2
cartridge
(reposit)
9 Alginate impression material Irreversible hyrocolloid-
regular set, dustless alginate
Dental
Impression
Septodont or
Equivalent 450 g per pack
10 Alvogyl
Fibrous paste containing
butamben, lodoform, eogenol,
pack of 12gm
Dry Socket
Treatment
Septodont or
Equivalent 1 jar of 10 gm
11 Anti cavity topical APF
preventive treatment gel
1.23% acidulated phoshate
fluoride gel
Dental Caries
Treatment
Bubble Gum or
Equivalent 16 oz. jar
12 Arch bar (fine) 30 cmc length, stainless steel,
erich arch bar
Maxillofacial
Trauma
Orthomax/
Orthotec or
Equivalent
1 roll
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 19 of 44
13 Arch bar (E2)
10 cmc length, stainless steel,
erich arch bar & designed for
screw fixation
Maxillofacial
Trauma
Orthomax/
Orthotec or
Equivalent
1 strip with 1
set of 8 screws
14 Articulating paper
0.8 microns thicknes of 12
micron, 40 micron and 100
micron of black blue and red
colour
Dental
Occlusion
Correction
Artifold / Bausch
or Equivalent Strips/roll
15 Bonding agent for composite
resin
Volatile good wettability.
Light cured resin, light cured
Dental
Restoration
3M ESPE or
Equivalent 1 bottle of 5 gm
16 Bone wax
Sterile mixture of natural
beeswad and vaseline
ISOPROPYL PALMITATE
Arresting Bone
Oozing
Sutures India;
Ethicon (J&J) or
Equivalent
Pack of 12
17 Barbed broaches 10 x 21 mm
For extripation of pulp tissue,
made of stainless steel and
should be flexible
Root Canal
Treatment
Dentsply or
Equivalent 10 pcs per pack
18 Barbed broaches 10 x 25 mm
For extripation of pulp tissue,
made of stainless steel and
should be flexible
Root Canal
Treatment
Dentsply or
Equivalent 10 pcs per pack
19 Carbide burs TC Bur Cylinder
#558
Tungsten carbide but for
cavity preparation, made with
high quality fine grain
tungsten carbide, sharper
blades, wears longer
Cavity
Preparation
SS White/
Crosstech or
Equivalent
Strip of 100
burs
20 Carbide bur 559
Tungsten carbide but for
cavity preparation, made with
high quality fine grain
tungsten carbide, sharper
blades, wears longer
Cavity
Preparation
SS White/
Crosstech or
Equivalent
5 pc per pack
21 Carbide burs TC Bur Cylinder
#560
Tungsten carbide but for
cavity preparation, made with
high quality fine grain
tungsten carbide, sharper
blades, wears longer
Cavity
Preparation
SS White/
Crosstech or
Equivalent
5 pc per pack
22 Carbide bur 701
Taper/flat end cross cut,
overall length 17mmm
working length 3.8mm, head
diameter 1.2mm, tip daimeter
0.8mm
Bone Cutting
SS White/
Crosstech or
Equivalent
5 pc per pack
23 Carbide bur 702
Taper/flat end cross cut,
overall length 17mmm
working length 3.8mm, head
diameter 1.2mm, tip daimeter
0.8mm
Bone Cutting
SS White/
Crosstech or
Equivalent
5 pc per pack
24 Carbide bur 703
Taper/flat end cross cut,
overall length 17mmm
working length 3.8mm, head
diameter 1.2mm, tip daimeter
Bone Cutting
SS White/
Crosstech or
Equivalent
5 pc per pack
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 20 of 44
0.8mm
25 Pulp devitaliser (Caustinerf)
Non carcinogenic,
mummifying agent.
Paraformaldehyde (non
arsenic)
Root Canal
Treatment
Septodont/Prevest
or Equivalent 1 jar of 6 gm
26 Pulp devitaliser
Non carcinogenic,
mummifying agent.
Paraformaldehyde (non
arsenic)
Root Canal
Treatment
Voco Depulpin By
Dentsply or
Equivalent
1 syringe of 3
gm
27
Temporary restorative
material (Cavit-G by 3M
ESPE)
Temporary resin light cured/
dual cured
Dental
Restoration
3M Espe or
Equivalent 28g
28
Cavity preparation kit set of
air rotor Burs (SSW-WF16 +
SSW-BR46C + SSW-BR41C
+ SSW-SR12C + SSW-SF51C
+ SSW-RS41 + 14721 +
14730)
Sintered diamond burs for
cavity preparation
Cavity
Preparation
Shofu or
Equivalent 1 set of 8 burs
29 Cavity preparation set of air
rotor burs (Cross Tech)
Sintered diamond burs for
cavity preparation
Cavity
Preparation
Cross Tech or
Equivalent 1 set of 15 burs
30
Posterior composite
restorative material (GC
EVERX POSTERIOR
UNITIP REFILL)
Fibre reinforced, high fracture
toughness, hight compressive
strength, less shirnkage
Dental
Restoration GC or Equivalent
15 x 0.13
ml/0.25 gm
unitips
31 GIC Type 7 (GC Fuji)
GIC with surface protectant
caity sealant, moist field
friendly, caries protective,
helps in reminderalisation
Dental
Restoration GC or Equivalent
15 gm powder
+ 10 ml liquid)
32 Zinc polycarboxylate cement
(GC LivCarbo)
Flouride releasing luting
agent, Adhesive to teeth,
comes in powder and liquid
form
Dental
Restoration GC or Equivalent
50 gm powder
& liquid bottles
33 Cavity lining (DPI)
Apply in thin layers 0.5mm.
calcium hydroxide or zinc
phosphate. seals the dentin.
Dental
Restoration DPI or Equivalent 10 ml
34 Temporary restorative
material (GC Caviton)
Fluoride releasing temporary
restoration, Eugenol free,
Radioopaque, sets with saliva
Dental
Restoration
3M Espe or
Equivalent 30 gm
35 Cavity conditioner (GC)
Conditioner for bonding
surface of teeth, thin viscosity,
3% aluminium chloride
Dental
Restoration Gc or Equivalent 6 gm
36
Chlohexidine gluconate root
canal gel 2% (CAVISEPT by
Neelkanth)
2% chlohexidine gluconate Root Canal
Treatment Gc or Equivalent 4 gm syringe
37 Chlohexidine gluconate canal
irrigation 2% solution
2% chlohexidine gluconate Root Canal
Treatment
Safe Plus / Xenon
or Equivalent 500 ml
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 21 of 44
(Neelkanth)
38 Chlohexidine mouth wash 2% chlohexidine gluconate Oral Cavity
Irrigation
Klorex or
Equivalent 500 ml
39
Fluoride 900 ppm topical
tooth crème (GC Tooth
Mousse)
Used with tray for prevention
of caries, sugarfree, flavoured
Caries
Prevention Gc or Equivalent Tube of 40 gm
40 Handpiece lubrication oil
spray
Without any chlorofluoro
carbons, Cleanes and
lubricates handpiece
Handpiece
Protection
Turbo X Spray /
Kavo or Equivalent 500 ml
41 Periodontal dressing (Coe Pak
brand)
Eugenol free, surgical dressing
, periodontal dressing
Periodontal
Surgery Gc or Equivalent
1 base
90g+1catalyst
90g
42 Periodontal surgical dressing
(Barricaid by Dentsply)
Visible light cured periodontal
dressing, urethane
dimethaacylate resin
Periodontal
Surgery
Dentsply or
Equivalent
Pack of 4
syringes
43 Cold cure acrylic- pink color
(DPI)
Methyl methaacrylate
monomer and polymer. Denture Dpi or Equivalent
400 gm powder
+ 400 gm liquid
44 Cold cure acrylic - clear color
(DPI)
Methyl methaacrylate
monomer and polymer. Denture Dpi or Equivalent
400 gm powder
+ 400 gm liquid
45 Cold mould seal (DPI) Seperating agent for acrylic
and casts Denture Dpi or Equivalent 450 ml
46
Cold cure liquid acrylic repair
material denture base polymer
resin monomer
Methyl methaacrylate
monomer and polymer. Denture
Dpi-Rr or
Equivalent 400 ml liquid
47
Cold cure powder acrylic
repair material denture base
polymer resin (clear)
Methyl methaacrylate
monomer and polymer. Denture
Dpi-Rr or
Equivalent 400g powder
48
Cold cure powder acrylic
repair material denture base
polymer resin (pink)
Methyl methaacrylate
monomer and polymer. Denture
Dpi-Rr or
Equivalent 400g powder
49 Composite resin kit (3M
ESPE) = flowable composite
Restorative resin, dual core for
anterior and posterior teeth.
dual core
Dental
Restoration
3M Espe or
Equivalent
4 syringes of
assorted shades
+ single bond
adhesive +
applicator
brushes
50 Composite resin (filling
material) A1 shade
Restorative resin, dual core for
anterior and posterior teeth.
dual core
Dental
Restoration
Coltene / 3M
Espe/Dentsply or
Equivalent
syringe of 4 gm
51 Composite resin (filling
material) A2 shade
Restorative resin, dual core for
anterior and posterior teeth.
dual core
Dental
Restoration
Coltene / 3M
Espe/Dentsply or
Equivalent
syringe of 4 gm
52 Composite resin (filling
material) A3 shade Restorative resin, dual core for
anterior and posterior teeth.
Dental
Restoration Coltene / 3M
Espe/Dentsply or
syringe of 4 gm
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 22 of 44
dual core Equivalent
53 Composite resin (filling
material) A3.5 shade
Restorative resin, dual core for
anterior and posterior teeth.
dual core
Dental
Restoration
Coltene / 3M
Espe/Dentsply or
Equivalent
syringe of 4 gm
54 Composite resin (filling
material)B1 shade
Restorative resin, dual core for
anterior and posterior teeth.
dual core
Dental
Restoration
Coltene / 3M
Espe/Dentsply or
Equivalent
syringe of 4 gm
55 Composite resin (filling
material) B2 shade
Restorative resin, dual core for
anterior and posterior teeth.
dual core
Dental
Restoration
Coltene / 3M
Espe/Dentsply or
Equivalent
syringe of 4 gm
56 Composite resin (filling
material) B3 shade
Restorative resin, dual core for
anterior and posterior teeth.
dual core
Dental
Restoration
Coltene / 3M
Espe/Dentsply or
Equivalent
syringe of 4 gm
57 Composite finishing kit stones
(SHOFU)
Finishing and polishing kit for
composit resin. Green-
adjusting, white-finishing
Dental
Restoration
Shofu or
Equivalent
set of 12
individual burs
58 Intermediate restorative
material (IRM by Dentsply)
Intermediate restoration upto
1yr, Zinc oxide eugenol
cement
Dental
Restoration
Dentsply or
Equivalent
Powder 38 gm
and liquid 14
ml
59 Temporary crown material
(GC Tempron) Contains base and catalyst
Temporary
Crown
Rely X or
Equivalent
Powder 100 gm
+ Liquid 100
gm
60 Cool temp ( temporary
restorative material )
Composite material for
temporization. High esthetics,
self cure resin
Dental
Restoration
Coltene / 3M
Espe/Dentsply or
Equivalent
1 pack
61 Zirconomer (SHOFU)
universal restorative material
Zirconia reinforced glass
ionomer cement
Dental
Restoration
Shofu or
Equivalent
powder 12 gm
+ liquid 5 ml
62 Cotton roll with dispenser for
isolation for restoration
Surgical cotton roll of good
quality for isolation
Dental
Restoration
Generic or
Equivalent Boxes
63 Crown preparation bur kit
(Shofu)
Sintered diamond bur for
crown preparation.
Crown
Preparation
Shofu-10 Set or
Equivalent
containing
Diamond Points
FG x 14 in 3
different grits
(Regular, Fine
and Superfine)
"Regular grit:
201, 101, 102R,
104R, 265R,
148 , 122"
"Fine grit:
F102R,
F414SS,
F414S"
"Superfine grit:
SF201, SF101,
SF104R,
SF265R"
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 23 of 44
64 Dental floss Waxed dental floss for
interproximal cleaning
Dental
Restoration
And Crown
Preparation
Stim or Equivalent Individual
plastic packs
65 Dental plaster type-2 Calcium sulphate beta
hemihydrate.
Dental Cast
Preparation
Neelkanth or
Equivalent 3kg/pkt
66 Dental stone type - 3 Calcium sulphate alpha
hemihydrate.
Dental Cast
Preparation
Kala Bhai/Kalrock,
Orthokal or
Equivalent
3 kg per pack
67 Die stone type -4
Calcium sulphate alpha
hemihydrate. High strength
low expansion gypsum
product.
Dental Cast
Preparation
Kala Bhai or
Equivalent 3 kg per pack
68 Disposable patient drapes Water proof. Good quality. Protection Of
Patient Capri or Equivalent pack of 50
69
Radio opaque calcium
hydroxide composition
(Dycal)
Calcium hydrooxide for direct
and indirect pulp capping.
Base and calalyst form
Root Canal
Treatment
Densply / Kerr or
Equivalent
Base tube +
catalyst tube
70 EDTA gel root canal
decalcifier (Medicept)) 17% EDTA( Glyde)
Root Canal
Treatment
Densply / Kerr or
Equivalent
tube containing
EDTA+urea
peroxide
71 Zinc oxide eugenol root canal
sealant (Septodont)
Endomethasone, radioopaque,
inert,antiseptic,antiinflammato
ry. Liquid and powder
Root Canal
Treatment
Eugen or
Equivalent 100 gm
72
Calcium hydroxide root canal
sealant (Sybron Endo
SealApex)
Eugenol free. Root canal
sealer, rapid healing.
Root Canal
Treatment Kerr or Equivalent
Base 12 gm +
Catalyst 12 gm
73 Epoxy amine root canal
sealant (AH Plus by Dentsply)
Good tissue compatibility,
radio opaqu, less solubility, no
formaldehyde.
Root Canal
Treatment
Dentsply or
Equivalent
2 tubes of 4 ml
each
74 Pulp devitalizing
paraformaldehyde-based paste
Non carcinogenic,
mummifying agent.
Paraformaldehyde (non
arsenic)
Root Canal
Treatment
Septodont or
Equivalent 6 gm jar
75 Pulp devitalizing paste pain-
relieving
Non carcinogenic,
mummifying agent.
Paraformaldehyde (non
arsenic)
Root Canal
Treatment
(Pd Swiss Devitec)
or Equivalent 6 gm jar
76 Fiber post ( plastic)
Esthetic post for anterior and
premolar. Translucent
reinforced composite fiber
Crown Mailyard or
Equivalent
10 pcs per
packet
77 Finishing bur Sintered diamond fine grit Crown
Preparation
Shofu/Coltene or
Equivalent 6 burs/box
78 Gates glidden drill 32 mm No.
1-6
Shaping of coronal third of
root canal. Stainless steel
Root Canal
Treatment Mani or Equivalent 1 box has 6 pcs
of varying sizes
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 24 of 44
1-6
79 Gingival hemostatic gel
Used to control gingival
bleeding 25% aluminium
sulphate gel.
Crown
Preparation
Ultradent or
Equivalent 1 syringe
80 Gingival mask (Coltene GI
Mask Starter Kit)
Silicone material to simulate
gingiva
Crown
Preparation
Coltene / 3M
Espe/Dentsply or
Equivalent
1 base, 1
activator, 1
separator,
mixing tips
81 Gingival non-medicated
retraction cord
Knitted, non medicated, 0 / 00
/ 000
Crown
Preparation
Pascal or
Equivalent 1 packet
82 Glass ionomer cement Type I
(GC Gold Label)
Luting cement, able to form
thin film with low viscocity,
Powder and liquid form
Dental
Restoration Gc or Equivalent
powder-15g,liq-
8g
83 Glass ionomer cement Type II
(GC Gold Label)
Posterior restorative cement,
High compressive strength,
Powder and liquid
Dental
Restoration Gc or Equivalent
powder-15g,liq-
8g
84
Glass ionomer high strength
posterior restorative Type IX
(GC Fuji)
Posterior GIC, High
compressive strength powder
and liquid.
Dental
Restoration Gc or Equivalent
powder-15g,liq-
8g
85 Transparent matrix strips
Mylar syrips useful for
temporary wall preaparation,
Polyester film, smooth edges
Dental
Restoration
(Filaydent) or
Equivalent
1 dispenser of a
roll of material
86
Composite polishing discs
coated with aluminium oxide
and madrel (Sof-Lex by 3M
ESPE)
SOFLEX PROXIMAL
STRIPS WITH DIFFERENT
GRADES (FINE, MEDIUM,
SUPERFINE)
Dental
Restoration
3M Espe or
Equivalent
Pack of flexible
polishing discs
of 4 abrasive
grades and 2
thicknesses
87
Composite finishing
interproximal strips with
aluminium oxide coating -
Fine/Superfine
SOFLEX PROXIMAL
STRIPS WITH DIFFERENT
GRADES (FINE, MEDIUM,
SUPERFINE)
Dental
Restoration
3M Espe or
Equivalent
150 strips per
packet
88 Green stick compound Tracing compound/ tray
compound Denture Dpi or Equivalent 10 pcs /packet
89 Gutta percha (F1) Thermoplastic,inert,radioopaq
ue
Root Canal
Treatment
Dentsply or
Equivalent 60 pcs/packet
90 Gutta percha (F2) Thermoplastic,inert,radioopaq
ue
Root Canal
Treatment
Dentsply or
Equivalent 60 pcs/packet
91 Gutta percha (F3) Thermoplastic,inert,radioopaq
ue
Root Canal
Treatment
Dentsply or
Equivalent 60 pcs/packet
92 Gutta percha (F4) Thermoplastic,inert,radioopaq
ue
Root Canal
Treatment
Dentsply or
Equivalent 60 pcs/packet
93 Gutta percha (F5) Thermoplastic,inert,radioopaq
ue
Root Canal
Treatment
Dentsply or
Equivalent 60 pcs/packet
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 25 of 44
94 Gutta percha (regular) Thermoplastic,inert,radioopaq
ue
Root Canal
Treatment
Dentsply or
Equivalent 60 pcs/packet
95 Gutta purcha point 15 Thermoplastic,inert,radioopaq
ue
Root Canal
Treatment
Dentsply or
Equivalent 60 pcs/packet
96 Gutta purcha point 20 Thermoplastic,inert,radioopaq
ue
Root Canal
Treatment
Dentsply or
Equivalent 60 pcs/packet
97 Gutta purcha point 25 Thermoplastic,inert,radioopaq
ue
Root Canal
Treatment
Dentsply or
Equivalent 60 pcs/packet
98 Gutta purcha point 30 Thermoplastic,inert,radioopaq
ue
Root Canal
Treatment
Dentsply or
Equivalent 60 pcs/packet
99 Gutta purcha point 35 Thermoplastic,inert,radioopaq
ue
Root Canal
Treatment
Dentsply or
Equivalent 60 pcs/packet
100 Gutta purcha point 40 Thermoplastic,inert,radioopaq
ue
Root Canal
Treatment
Dentsply or
Equivalent 60 pcs/packet
101 Gutta purcha point 45 Thermoplastic,inert,radioopaq
ue
Root Canal
Treatment
Dentsply or
Equivalent 60 pcs/packet
102 Gutta purcha point 50 Thermoplastic,inert,radioopaq
ue
Root Canal
Treatment
Dentsply or
Equivalent 60 pcs/packet
103 Gutta purcha point 55 Thermoplastic,inert,radioopaq
ue
Root Canal
Treatment
Dentsply or
Equivalent 60 pcs/packet
104 Gutta purcha point 60 Thermoplastic,inert,radioopaq
ue
Root Canal
Treatment
Dentsply or
Equivalent 60 pcs/packet
105 Gutta purcha point 65 Thermoplastic,inert,radioopaq
ue
Root Canal
Treatment
Dentsply or
Equivalent 60 pcs/packet
106 Gutta purcha point 70 Thermoplastic,inert,radioopaq
ue
Root Canal
Treatment
Dentsply or
Equivalent 60 pcs/packet
107 Gutta purcha point 75 Thermoplastic,inert,radioopaq
ue
Root Canal
Treatment
Dentsply or
Equivalent 60 pcs/packet
108 Gutta purcha point 80 Thermoplastic,inert,radioopaq
ue
Root Canal
Treatment
Dentsply or
Equivalent 60 pcs/packet
109 Gutta purcha point f1 Thermoplastic,inert,radioopaq
ue
Root Canal
Treatment
Dentsply or
Equivalent 60 pcs/packet
110 Gutta purcha point f2 Thermoplastic,inert,radioopaq
ue
Root Canal
Treatment
Dentsply or
Equivalent 60 pcs/packet
111 Gutta purcha point f3 Thermoplastic,inert,radioopaq
ue
Root Canal
Treatment
Dentsply or
Equivalent 60 pcs/packet
112 Gutta purcha point f4 Thermoplastic,inert,radioopaq
ue
Root Canal
Treatment
Dentsply or
Equivalent 60 pcs/packet
113 Gutta purcha point f5 Thermoplastic,inert,radioopaq
ue
Root Canal
Treatment
Dentsply or
Equivalent 60 pcs/packet
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 26 of 44
114 Gutta purcha point iso colour
coded
Thermoplastic,inert,radioopaq
ue
Root Canal
Treatment
Dentsply or
Equivalent 60 pcs/packet
115 H file 25mm 08 no.
Round cross section for BMP
of root canal . High cutting
ability
Root Canal
Treatment
Dentsply or
Equivalent 1 box has 6 files
116 H file 25mm 15 no.
Round cross section for BMP
of root canal . High cutting
ability
Root Canal
Treatment
Dentsply or
Equivalent 1 box has 6 files
117 H file 25mm 20 no.
Round cross section for BMP
of root canal . High cutting
ability
Root Canal
Treatment
Dentsply or
Equivalent 1 box has 6 files
118 H file 25mm 25 no.
Round cross section for BMP
of root canal . High cutting
ability
Root Canal
Treatment
Dentsply or
Equivalent 1 box has 6 files
119 H file 25mm 30 no.
Round cross section for BMP
of root canal . High cutting
ability
Root Canal
Treatment
Dentsply or
Equivalent 1 box has 6 files
120 H file 25mm 35 no.
Round cross section for BMP
of root canal . High cutting
ability
Root Canal
Treatment
Dentsply or
Equivalent 1 box has 6 files
121 H file 25mm 40 no.
Round cross section for BMP
of root canal . High cutting
ability
Root Canal
Treatment
Dentsply or
Equivalent 1 box has 6 files
122 K-files 21 MM (no 8)
Square cross section stainless
steel, flexible. Used for BMP.
Twisted
Root Canal
Treatment
Dentsply or
Equivalent 1 box has 6 files
123 K-files 21 MM (no10)
Square cross section stainless
steel, flexible. Used for BMP.
Twisted
Root Canal
Treatment
Dentsply or
Equivalent 1 box has 6 files
124 K-files 21 MM (no15)
Square cross section stainless
steel, flexible. Used for BMP.
Twisted
Root Canal
Treatment
Dentsply or
Equivalent 1 box has 6 files
125 K-files 21 MM (no 20)
Square cross section stainless
steel, flexible. Used for BMP.
Twisted
Root Canal
Treatment
Dentsply or
Equivalent 1 box has 6 files
126 K-files 21 MM (no 25)
Square cross section stainless
steel, flexible. Used for BMP.
Twisted
Root Canal
Treatment
Dentsply or
Equivalent 1 box has 6 files
127 K-files 21 MM (no 30)
Square cross section stainless
steel, flexible. Used for BMP.
Twisted
Root Canal
Treatment
Dentsply or
Equivalent 1 box has 6 files
128 K-files 21 MM (no 35)
Square cross section stainless
steel, flexible. Used for BMP.
Twisted
Root Canal
Treatment
Dentsply or
Equivalent 1 box has 6 files
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 27 of 44
129 K-files 21 MM (no 40)
Square cross section stainless
steel, flexible. Used for BMP.
Twisted
Root Canal
Treatment
Dentsply or
Equivalent 1 box has 6 files
130 K-files 25 MM (no 8)
Square cross section stainless
steel, flexible. Used for BMP.
Twisted
Root Canal
Treatment
Dentsply or
Equivalent 1 box has 6 files
131 K-files 25 MM (no10)
Square cross section stainless
steel, flexible. Used for BMP.
Twisted
Root Canal
Treatment
Dentsply or
Equivalent 1 box has 6 files
132 K-files 25 MM (no15)
Square cross section stainless
steel, flexible. Used for BMP.
Twisted
Root Canal
Treatment
Dentsply or
Equivalent 1 box has 6 files
133 K-files 25 MM (no 20)
Square cross section stainless
steel, flexible. Used for BMP.
Twisted
Root Canal
Treatment
Dentsply or
Equivalent 1 box has 6 files
134 K-files 25 MM (no 25)
Square cross section stainless
steel, flexible. Used for BMP.
Twisted
Root Canal
Treatment
Dentsply or
Equivalent 1 box has 6 files
135 K-files 25 MM (no 30)
Square cross section stainless
steel, flexible. Used for BMP.
Twisted
Root Canal
Treatment
Dentsply or
Equivalent 1 box has 6 files
136 K-files 25 MM (no 35)
Square cross section stainless
steel, flexible. Used for BMP.
Twisted
Root Canal
Treatment
Dentsply or
Equivalent 1 box has 6 files
137 K-files 25 MM (no 40)
Square cross section stainless
steel, flexible. Used for BMP.
Twisted
Root Canal
Treatment
Dentsply or
Equivalent 1 box has 6 files
138 Hand protaper 21 mm f1
Set of 6 instruments,for
cleansing and shaping
canal,variable taper ,highly
flexible,NiTi files
Root Canal
Treatment
Dentsply or
Equivalent 1 set 6 pcs
139 Hand protaper 21 mm f2
Set of 6 instruments,for
cleansing and shaping
canal,variable taper ,highly
flexible,NiTi files
Root Canal
Treatment
Dentsply or
Equivalent 1 set 6 pcs
140 Hand protaper 21 mm f3
Set of 6 instruments,for
cleansing and shaping
canal,variable taper ,highly
flexible,NiTi files
Root Canal
Treatment
Dentsply or
Equivalent 1 set 6 pcs
141 Hand protaper 21 mm s1
Set of 6 instruments,for
cleansing and shaping
canal,variable taper ,highly
flexible,NiTi files
Root Canal
Treatment
Dentsply or
Equivalent 1 set 6 pcs
142 Hand protaper 21 mm s2 Set of 6 instruments,for
cleansing and shaping
canal,variable taper ,highly
Root Canal
Treatment
Dentsply or
Equivalent 1 set 6 pcs
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 28 of 44
flexible,NiTi files
143 Hand protaper 21 mm sx
Set of 6 instruments,for
cleansing and shaping
canal,variable taper ,highly
flexible,NiTi files
Root Canal
Treatment
Dentsply or
Equivalent 1 set 6 pcs
144 Hand protaper 25 mm f1
Set of 6 instruments,for
cleansing and shaping
canal,variable taper ,highly
flexible,NiTi files
Root Canal
Treatment
Dentsply or
Equivalent 1 set 6 pcs
145 Hand protaper 25 mm f2
Set of 6 instruments,for
cleansing and shaping
canal,variable taper ,highly
flexible,NiTi files
Root Canal
Treatment
Dentsply or
Equivalent 1 set 6 pcs
146 Hand protaper 25 mm f3
Set of 6 instruments,for
cleansing and shaping
canal,variable taper ,highly
flexible,NiTi files
Root Canal
Treatment
Dentsply or
Equivalent 1 set 6 pcs
147 Hand protaper 25 mm s1
Set of 6 instruments,for
cleansing and shaping
canal,variable taper ,highly
flexible,NiTi files
Root Canal
Treatment
Dentsply or
Equivalent 1 set 6 pcs
148 Hand protaper 25 mm s2
Set of 6 instruments,for
cleansing and shaping
canal,variable taper ,highly
flexible,NiTi files
Root Canal
Treatment
Dentsply or
Equivalent 1 set 6 pcs
149 Hand protaper 25 mm sx
Set of 6 instruments,for
cleansing and shaping
canal,variable taper ,highly
flexible,NiTi files
Root Canal
Treatment
Dentsply or
Equivalent 1 set 6 pcs
150 Heat cure acrylic- pink
Heat activated,acrylic resin
with polymer,monomer.high
cross linked
Denture
Lucitone/
Travellon 02 or
Equivalent
pouch + liq.
900ml
151 phosphoric acid (h3po4)
37% hydophosphoric acid for
teeth etching, increases
surface area.
Dental
Restoration
Dentsply/
Vita/3M or
Equivalent
9ml/bottle
152 Hydro fluoric (hf) Porcelein etchant. 5% / 10%
Hydrofluric acid
Dental
Restoration
Dentsply/
Vita/3M or
Equivalent
25 syringe, 1.2
ml each
153 Hypo chloiride 3% Root canal irrigant.
Antimicrobial activity
Dental
Restoration
Xenon or
Equivalent 500 ml
154 Imf screws
Self tappimg, 2mm diameter
8-10 mm length,3.5 mm long
head
Dental Wiring Orthomax or
Equivalent 5 screw/pkt
155 Impression compound
Thermoplastic,for primary
impression in edentulous
patients, comes in cake form
Denture Y Dents or
Equivalent 5 pcs per pack
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 29 of 44
156 Impression disinfectant Alcohal free MD 520, hospital
grade, disinfectant Denture Durr or Equivalent 2.5/5ltr bottle
157 Impression material light body Low viscosity, silicone
material, syringe form Denture
Coltene / 3M
Espe/Dentsply or
Equivalent
2 tube per pack
158 Impression material regular
body Regular body silicone material Denture
Coltene / 3M
Espe/Dentsply or
Equivalent
2 tube per pack
159 Inflamable spirit for lamp 90% ethyl alcohal for burning
spirit lamp Denture
Any Suitable
Brand or
Equivalent
1000ml /bottle
160 Inj lignocain with adernaline
1:200,000
2% lidocain with 1:2,000,00.
adrenaline for purpose of local
infilteration for local
anesthesia
Local
Anesthesia
Neon; Astra
Zeneca or
Equivalent
30 ml /vial
161 Inj lignocain with adernaline
1:80,000 cartridge
2% lidocaine 1 :80,000 diluted
adrenaline ampules of 1.8 ml
each to be used with syringe.
Local
Anesthesia
Septodont or
Equivalent
50 cartridge
(1.5ml)/box
162 Intracanal irrigants
chlorhexidine
2% chlorhexidine
antimicrobial activity, root
canal irrigant
Root Canal
Treatment
Septodont or
Equivalent 16 OZ/bottal
163 Ketac molar
Restorative GIC. Flouride
releasing high strength. Metal
free GIC
Dental
Restoration
3M Espe or
Equivalent
powder-15g,liq-
7g
164 Lentrio spiral 21 mm 25-40
To distribute root canal sealant
evenly through canal. High
flexibility.
Root Canal
Treatment
Prime Dental or
Equivalent 1 box has 6 pcs
165 Lentrio spiral 25 mm 25-40
To distribute root canal sealant
evenly through canal. High
flexibility.
Root Canal
Treatment
Prime Dental or
Equivalent 1 box has 6 pcs
166 Libral elastomerics ioose ties
To tighten around the bracket.
Small elastic band or wire to
be able to hold archwire to the
bracket.
Orthodontics Libral Trades or
Equivalent 1 pack
167 Ligature tie (modules)
To tighten around the bracket.
Small elastic band or wire to
be able to hold archwire to the
bracket.
Orthodontics Libral Trades or
Equivalent 1000 pcs /pack
168 Ligature wire 0.009 inch
Super soft,high qualiyu wire,
spool of 50 gms, 0.0009
inches
Orthodontics D-Tech or
Equivalent spool of 50gm
169 Lignocain spray topical Topical anesthetic agent. 10%
xylocaine spray
Local
Anesthesia
Septodont or
Equivalent 100 ml of bottle
170 Lignospan special with needle No methyl paraben,2%
lignocaine, 1:80,000
Local
Anesthesia
Septodont or
Equivalent 50 psc per pack
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 30 of 44
adrenaline
171 Magic foam retraction gel Silicone retraction system,
cartridge form
Crown
Preparation
Coltene / 3M
Espe/Dentsply or
Equivalent
1 PACK
172 Matrix band strips no.1
Stainless steel, moldabvle for
msioocclusal/distoocclusal
cavity( 0.0015 inches thick)
Restoration Classic /Jenin or
Equivalent
12 pcs per
packet
173 Matrix band strips no.8
Used in mesio-occluso-distal
cavity, stainless steel,
thickness of 0.0015 inches
Restoration Classic /Jenin or
Equivalent
12 pcs per
packet
174 Matrix strips straight (plastic)
Used in mesio-occluso-distal
cavity, stainless steel,
thickness of 0.0015 inches
Restoration Sony Dent or
Equivalent
200strips per
packet
175 Metapex
Calcium hydroxide and
iodoform for decidous
teeth(premixed root canal
filling material)
Root Canal
Treatment Meta or Equivalent
Syringe of
2.2gm (Double)
176 Miracle mix radio opaque
silver alloy
GIC and admixed silver
amalgam restorative, resin
reinforced for cavity and core
build up.
Restoration Gc or Equivalent powder-15g,liq-
10g
177 Modelling wax 2mm thick wax sheets, base
plate wax. Denture
Rolex/Maarc or
Equivalent 05 packet
178 Mouth mirror top
Antifor,good quality,good
relective property, for oral and
tooth inspection.
Diagnostic Api/Gdc or
Equivalent 10 pcs per pack
179 Mta
Apexification
cartiridge,radiopacity tricalcic
silicate, tricalcicaluminate.
Root Canal
Treatment
Dentsply or
Equivalent
1gm ampuls (5
pouch)
180 Needle 26 x 1 1/2"
Hypodermic needle,1 inch,hub
color- brown,type lever
silp,gauze 26g. Length 25 mm
Local
Anesthesia
Dispovan or
Equivalent 100 pcs/box
181 Non-disposable patient drapes
(bibs)
Good qualuty,woven
materail,50/50 long staple,
cotton and polyester,2 mm
thick,washable and
autoclavable.
Patient
Protection
Any Suitable
Brand or
Equivalent
Packet
182 Nova bone putty
Calcium phosphosilicate with
polyethylene glycolate. Used
for bone augmentation.
Implants Novabone or
Equivalent
0.25cc pack of
4
183 Occlusion spray Recognition of high
spot,bottle and nozzle.
Occlusion
Correction
Artispray/
Bausch or
Equivalent
75 ml
184 Optra pol ( composite
polisher) Ivoclar. Microfinediamond
crystals,for polishing
Restoration Oprapol or
Equivalent 4 pcs per packet
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 31 of 44
composite.
185 Paper point 15
For drying root canal,highly
absorbant sterile, stiff enough
to be inserted in canal without
loosing shape.
Root Canal
Treatment
Dia Dent or
Equivalent 1 box
186 Paper point 20
For drying root canal,highly
absorbant sterile, stiff enough
to be inserted in canal without
loosing shape.
Root Canal
Treatment
Dia Dent or
Equivalent 1 box
187 Paper point 25
For drying root canal,highly
absorbant sterile, stiff enough
to be inserted in canal without
loosing shape.
Root Canal
Treatment
Dia Dent or
Equivalent 1 box
188 Paper point 30
For drying root canal,highly
absorbant sterile, stiff enough
to be inserted in canal without
loosing shape.
Root Canal
Treatment
Dia Dent or
Equivalent 1 box
189 Paper point 35
For drying root canal,highly
absorbant sterile, stiff enough
to be inserted in canal without
loosing shape.
Root Canal
Treatment
Dia Dent or
Equivalent 1 box
190 Paper point 40
For drying root canal,highly
absorbant sterile, stiff enough
to be inserted in canal without
loosing shape.
Root Canal
Treatment
Dia Dent or
Equivalent 1 box
191 Paper point- protaper f1
For drying root canal,highly
absorbant sterile, stiff enough
to be inserted in canal without
loosing shape.
Root Canal
Treatment
Dia Dent or
Equivalent 12 nos
192 Paper point- protaper f2
For drying root canal,highly
absorbant sterile, stiff enough
to be inserted in canal without
loosing shape.
Root Canal
Treatment
Dia Dent or
Equivalent 12 nos
193 Paper point- protaper f3
For drying root canal,highly
absorbant sterile, stiff enough
to be inserted in canal without
loosing shape.
Root Canal
Treatment
Dia Dent or
Equivalent 12 nos
194 Paper point- protaper f4
For drying root canal,highly
absorbant sterile, stiff enough
to be inserted in canal without
loosing shape.
Root Canal
Treatment
Dia Dent or
Equivalent 12 nos
195 Paper point- protaper f5
For drying root canal,highly
absorbant sterile, stiff enough
to be inserted in canal without
loosing shape.
Root Canal
Treatment
Dia Dent or
Equivalent 12 nos
196 Paper points (protaper) For drying root canal,highly
absorbant sterile, stiff enough
Root Canal
Treatment
Dentsply or
Equivalent
100 strile
PP/box
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 32 of 44
to be inserted in canal without
loosing shape.
197 Paper points (regular)
For drying root canal,highly
absorbant sterile, stiff enough
to be inserted in canal without
loosing shape.
Root Canal
Treatment
Dentsply or
Equivalent
100 strile
PP/box
198 Pattern resin
Self curing acrylic resin for
making pattern,coping post
and core build up.
Restoration Gc or Equivalent 1 powder + 1
liquid
199 Peso reamer drill 32 mm 1-6
Post space
preparation,removal of gutta
percha, flare root canal in
funnel shaped, high cutting
ability.
Root Canal
Treatment Mani or Equivalent 1 box has 6 pcs
200 Petroleum jelly
Used as seperating media
,bland emolient dressing and
soothing ointment.
Restoration Vaseline or
Equivalent 50gm
201 Pit and fissure sealent
50% inorganic filler, flouride
releasing, seals pits and
fissures.
Restoration Dentsply or
Equivalent
5ml syring &
5ml bottle
202 Plaster of paris ( pop) (type ii) Calcium sulphate beta
hemihydrate. Denture
Asian
Chemical/Neelkant
h or Equivalent
5 kg per pack
203 Plugger 21mm 15-40
Used for placement of
MTA/BIODENTIN in apical
region.
Root Canal
Treatment Mani or Equivalent 1 box has 6 pcs
204 Plugger 25mm 15-40
Used for placement of
MTA/BIODENTIN in apical
regio
Root Canal
Treatment Mani or Equivalent 1 box has 6 pcs
205 Polishing cake ( acrylic) For acrylic polishing , pumice
high siliceous material. Denture
Sumit or
Equivalent 1 pcs/packet
206 Polishing cake ( Metal) For metal polishing, cake
form. Denture
Sumit or
Equivalent 1 pcs/packet
207 Polishing paste(radent prophy
paste)
For polishing teeth, medium
grit prophy,removes stain,
pumice, light grey.
Denture Medicept or
Equivalent
45pcs per
packet
208 Polyther impression material
(impregum)
Hydrophillic, accurate
impression in moist condition.
Different viscosities. Comes in
tubes
Denture 3M Espe or
Equivalent
2x240ml box,
30ml catlyst
209 Posterior fiber reinforce
composite for dentin
Posterior restorations. Fibre
reinforced composite. To be
used as dentin replacement.
Restoration Gc or Equivalent 6 pkt
210 Prefabricated band and loop
space maintainers
Used in pediatric patients.
Stainless steel. Unilateral use. Restoration
3M Espe or
Equivalent 2 set
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 33 of 44
211 Prisma glass composite
polishing paste
Fine, grit aluminium oxide
polishing pastes. Restoration
Dentsply or
Equivalent 1 tube 4g
212 Proximal finishing strip
To create smooth proximal
surfaces for
coarse/medium/narrow,
diamond coated.
Restoration 3M Espe or
Equivalent
100 strip (com,
med. Nor. Fine)
213 R c cal (calcium hydroxide
paste)
Calcium hydroxide and
barium sulphate. Ready to use,
paste form
Root Canal
Treatment
Prime Dental or
Equivalent 1 syringe
214 R c solve ( dissolve gp and
znoe )
Dissolves GP in failed root
canal cases. Derivative of
orange oil, liquid, non irritant.
Root Canal
Treatment
Prime Dental or
Equivalent 1 bottle
215 Rc-help (edta), EDTA , lubricating root canal. Root Canal
Treatment
Prime Dental or
Equivalent 1 TUBE
216 Rotary endodontic files NiTi files ( Sx - S2 F1-F3) Root Canal
Treatment
Protaper Dentsply;
Hyflex Coltene; Tf
Files Kerr or
Equivalent
Set of files
217 Rotation wedges clear
Rotation wedges fit beneath
the archwire to administer
rotation forces where desired.
Latex Free
Orthodontic
Treatment
Libral Trades or
Equivalent 100 pcs /pack
218 Rotery protaper f1 NiTi files ( Sx - S2 F1-F3) Root Canal
Treatment
Dentsply or
Equivalent 1 set 6 pcs
219 Rotery protaper f2 NiTi files ( Sx - S2 F1-F3) Root Canal
Treatment
Dentsply or
Equivalent 1 set 6 pcs
220 Rotery protaper f3 NiTi files ( Sx - S2 F1-F3) Root Canal
Treatment
Dentsply or
Equivalent 1 set 6 pcs
221 Rotery protaper s1 NiTi files ( Sx - S2 F1-F3) Root Canal
Treatment
Dentsply or
Equivalent 1 set 6 pcs
222 Rotery protaper
s1,s2,f1,f2,f3,sx NiTi files ( Sx - S2 F1-F3)
Root Canal
Treatment
Dentsply or
Equivalent 1 set 6 pcs
223 Rotery protaper s2 NiTi files ( Sx - S2 F1-F3) Root Canal
Treatment
Dentsply or
Equivalent 1 set 6 pcs
224 Rotery protaper sx NiTi files ( Sx - S2 F1-F3) Root Canal
Treatment
Dentsply or
Equivalent 1 set 6 pcs
225 Round bur Diamond bur for caries
removal. Restoration Dfs or Equivalent 12 pack
226 Round bur for contrangle Diamond bur for caries
removal. Restoration
Ss White/
Crosstech or
Equivalent
5pcs/pack
227 Round bur surgical Stainless steel for cutting hard
tissue like tooth or bone.
Impaction
Surgery Ss White/
Crosstech or
100 bur/box
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 34 of 44
Equivalent
228 Round diamond bur for
contrangle
Diamond bur for caries
removal. Restoration
Ss White/
Crosstech or
Equivalent
5pcs/pack
229 Rvg sleeves (rounded edge)
To prevent contamination for
blood and saline,clear barrier
sleeves for preventing cross
contamination.
Rvg Neel Kanth or
Equivalent 100 pcs /pack
230 Sand paper
240 grit (10- 1.5 cm) used for
polishing dentures and
prosthesis.
Denture
Any Suitable
Brand or
Equivalent
sheets of size
5.5x9"
231 Silane coupling agent
Mechanical strength for
composite material. Improved
adhesion to polymer matrix
Restoration Vita/Dentsply or
Equivalent 8ml liq.bottle
232 Smith ss wire 24g 0.55 mm Stainless steel 24 gauge wire
for purspose of dental wiring
Maxillomanidb
ula Fixation
K C Smith/
Orthomax or
Equivalent
1 pack
233 Smith ss wire 26g 0.45 mm Stainless steel 26 gauge wire
for purspose of dental wiring
Maxillomanidb
ula Fixation
K C Smith/
Orthomax or
Equivalent
1 pack
234 Sof- lex coarse and grueso
disc 1/2 inch
Polishing wheels, color
code,coarse to fine, for
polishing restorations.
Restoration 3M Espe or
Equivalent 30 pcs
235 Sof -lex extra thin contouring
and polishing disc 3/8 inch
Polishing wheels, color
code,coarse to fine, for
polishing restorations.
Restoration 3M Espe or
Equivalent 30 pcs
236 Soft liner
Denture relining material,
tissue conditioner, acrylic
temporary material.
Denture Gc or Equivalent 1 pkt
237 Spreader 21mm 15-40
For lateral condensation of
gutta percha in root canal.
Made up of stainless steel
Root Canal
Treatment Mani or Equivalent 1 box has 6 files
238 Spreader 25mm 15-40
For lateral condensation of
gutta percha in root canal.
Made up of stainless steel
Root Canal
Treatment Mani or Equivalent 1 box has 6 pcs
239 Sprit 75% alcohol 400ml 75% alcohol. 400ml bottle Sanitization
Any Suitable
Brand or
Equivalent
12 bt
240 Stainless steel crown for pedo
patients
For pediatric patients in
decidous molars. Stainless
steel.
Pediatric
Patients
Hu Friedy or
Equivalent 01 set
241 Sticky wax
Hard, fast setting used to
repair wax pattern and weld
waxes togather
Repair Wax
Pattern
Dpi-Rr or
Equivalent
10 stick per
pack
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 35 of 44
242 Suction tips
For Intraoral Suction It is
made of non-toxic material, is
phthalates free and latex free It
has incorporated copper plated
wire which allows to maintain
a stable and price shape of the
tube
Intraoral
Suction
Neelkanth or
Equivalent
100 pcs per
pack
243 Suction tube
Suitable for pre-operative
removal of secretion and body
fluids. Cut to fit funnel
connector to suit different
suction pump lines at proximal
end
Pre Operative
Removal Of
Secration
Romsons or
Equivalent tube
244
Super soft putty (vinyl
polysiloxane impression
material)
Super soft putty used for
taking dental impression.
Dental
Impression
3M Espe or
Equivalent
1 base+ 1
catalyst
245 Surgical suction tip
Dental Surgical Aspirator Blue
Suction Tips (1/16" Diameter)
(4 Bags - 100 Tips)
Suction Plastcare or
Equivalent 25 pcs/pkt
246 Surgicel Sterile oxidized cellulose
polymer
Stop Post
Surgical
Bleeding
Ethicon or
Equivalent
0.5"x2.0"
12/box
247 Teeth set complete (a1, a2, a3
shade ) small ,medium,large
Acrylic teeth in
polymethacrylate produced
with two chromatic layers (a1,
a2, a3 shade ) small
,medium,large
Denture Acry Rock or
Equivalent 1 set
248 Tooth color acylic Methyl methaacrylate,for
temporary crown fabrication.
Temporary
Crown
Fabrication
Dpi or Equivalent 400gm/pkt
249 Transbond xt light cure
orthodontic adhesive
Light cure composite single
paste, no mix adhesive with a
rapid 20-second set time to
reduce the risk of moisture
contamination for bonding
orthodontic brackets
Orthodontic
Composite
3M Unitek or
Equivalent 1 pack
250 Wedges(wooden) Use in mesio-occlusal and
disto-occlusal restorations. Restoration
Neelkanth or
Equivalent 100pcs
251 Zinc oxide + eugenol based
paste
For final impression in
complete denture patients.
Rigid material.
Denture Septodont/Dpi or
Equivalent
2 tube150g +
62g
252 Zinc oxide eugenol cement Temporary cement. Sedative Temporary
Cement
Septodent or
Equivalent Powder + liquid
253 Zinc phosphate
powder+liquid(havard cement)
Permanent luting,high
compressive strength.
Permanent
Luting Cement
Harvard or
Equivalent
powder-
100g,liq-40ml
254 Zoe paste (resin bonded zinc
oxide / eugenol cement) Paste form, 2 tubes zinc oxide
and eugenol paste. High
Dental
Impression Dpi or Equivalent
powder-20g,liq-
10 ml
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 36 of 44
strength, longer life, fine
finish.
255 Floride Gel
topical fluoride gel that
contains, calcium and
phosphate in addition to
fluoride. These ingredients
protect the teeth, repair and
strengthen the affected tooth
structure. Fluor Protector Gel
provides protection against
dental caries, tooth erosion
and periodontal disease
Prevention Of
Dental Caries
Ivolcar or
Equivalent 16 OZ 1/PK
256 Anesthetic Ether
Used as a wound sealant,
Liniment, Analgesic
formulations Clear, Colorless
liquid 500 ml glassh bottle
Surgical Skin
Preparation
Nandhkrishna or
Equivalent 500 ml
257 Chlorhexidine gauge
Seterile chlorhexide coated
gouge dressing for the purpose
of dressing
Intraoral and
Extraoral
Dressing
Bactigras or
Equivalent 1 pcs/packet
258 Prosthetic silicon starter kit
(medical grade)
Silicon, intrinsic & extrinsic
pigment, cross linking agent,
seprater, primers, flocking
agnets
Maxillofacial
Prosthesis
Fabrication
Factor II or
Equivalent 1 kit/pack
259 Pattern wax
Blue inlay casting wax is a
superior wax for build-up that
softens in hot water and can be
carved easily to produce
excellent results. 120 sticks
250gms
Fixed Partial
Denture Kerr or Equivalent
15 sticks (
34gms)/pkt
260 Soft pattern wax
Excellent plasticity. Can be
used for build up and pressure
techniques. Can be easily
carved.
Fixed Partial
Denture Gc or Equivalent 60 STICKS/pkt
261 Dipping wax
Dipped wax copings with
sealed margins, base coat for
inlay and onlay pattern.
Microcrystalline structure and
elastic in nature.
Fixed Partial
Denture Kerr or Equivalent
300 GM
BOTTLES
262 Mesh work wax 5.80and 3.00 inches,for
making pattern for mesh work.
Fixed Partial
Denture
Bego or
Equivalent 1 PACK 20 pcs
263 Sprue wax
Wax wire – pliable and
tension free Green, medium
hard, 250g roll
Fixed Partial
Denture
Bego or
Equivalent 250 gm roll
264 Spacer wax
Thin wax- 0.3 mm, prevents
direct contact of acrylic trays
with soft tissues.
Fixed Partial
Denture
Maarc or
Equivalent 25 sheets
265 Beading wax Soft wax to bead round the
edge of impression prior to Fixed Partial
Kerr or Equivalent 42 STICKS
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 37 of 44
pouring. Improves accuracy of
model.
Denture
266 Boxing wax
Used for boxing impression
prior to pouring the
impression. Melts at 80 degree
centrigrate.
Fixed Partial
Denture Kerr or Equivalent
pack of 35
sheets
267 Schuller wax
Low contraction improved
flow and carving properties.
Should burn with leaving
residues.
Fixed Partial
Denture
Schuller or
Equivalent 45 gms
268 Acrylic trimmer stone (White)
Conical
For trimming,finishing and
polishing dentures.
Acrylic
Trimming
Shofu or
Equivalent 1 UNIT
269 Acrylic trimmer stone (Black)
Conical
For trimming,finishing and
polishing dentures.
Acrylic
Trimming
Shofu or
Equivalent 1 UNIT
270 Acrylic trimmer stone (Pink)
Conical
For trimming,finishing and
polishing dentures.
Acrylic
Trimming
Shofu or
Equivalent 1 UNIT
271 Acrylic trimmer stone (Blue)
Conical
For trimming,finishing and
polishing dentures.
Acrylic
Trimming
Shofu or
Equivalent 1 UNIT
272 Acrylic trimmer stone (White)
Cylindrical
For trimming,finishing and
polishing dentures.
Acrylic
Trimming
Shofu or
Equivalent 1 UNIT
273 Acrylic trimmer stone (Black)
Cylindrical
For trimming,finishing and
polishing dentures.
Acrylic
Trimming
Shofu or
Equivalent 1 UNIT
274 Acrylic trimmer stone (Pink)
Cylindrical
For trimming,finishing and
polishing dentures.
Acrylic
Trimming
Shofu or
Equivalent 1 UNIT
275 Acrylic trimmer stone (Blue)
Cylindrical
For trimming,finishing and
polishing dentures.
Acrylic
Trimming
Shofu or
Equivalent 1 UNIT
276 Acrylic trimmer stone (White)
Tapered
For trimming,finishing and
polishing dentures.
Acrylic
Trimming
Shofu or
Equivalent 1 UNIT
277 Acrylic trimmer stone (Black)
Tapered
For trimming,finishing and
polishing dentures.
Acrylic
Trimming
Shofu or
Equivalent 1 UNIT
278 Acrylic trimmer stone (Pink)
Tapered
For trimming,finishing and
polishing dentures.
Acrylic
Trimming
Shofu or
Equivalent 1 UNIT
279 Acrylic trimmer stone (Blue)
Tapered
For trimming,finishing and
polishing dentures.
Acrylic
Trimming
Shofu or
Equivalent 1 UNIT
280 Acrylic trimmer T.C. Burs
Conical
For trimming, and finishing
acrylic dentures.
Acrylic
Trimming
Shofu or
Equivalent 1 UNIT
281 Acrylic trimmer T.C. Burs
Cylindrycal
For trimming, and finishing
acrylic dentures.
Acrylic
Trimming
Shofu or
Equivalent 1 UNIT
282 Acrylic trimmer T.C. Burs
Straight
For trimming, and finishing
acrylic dentures.
Acrylic
Trimming
Shofu or
Equivalent 1 UNIT
283 Acrylic trimmer T.C. Burs
Tapered
For trimming, and finishing
acrylic dentures.
Acrylic
Trimming
Shofu or
Equivalent 1 UNIT
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 38 of 44
284 Acrylic trimmer T.C. Burs
Ball end
For trimming, and finishing
acrylic dentures.
Acrylic
Trimming
Shofu or
Equivalent 1 UNIT
285 Screw Mandrel
Screw rotary mandrel. Ideal for
use to hold diamond disc, wire
brushes etc.
Complete
Denture
Integra or
Equivalent 1 UNIT
286 Disk Mandrel
Tool attachment that holds a
small abrasive bristle disc. Used
for cleaning, blending and
finishing.
Complete
Denture
Integra or
Equivalent 1 UNIT
287 Sand Paper Mandrel
Fix sandpaper on mandrel to
use for polishing of denture
surfaces.
Complete
Denture
Zahnsply or
Equivalent 1 UNIT
288 Straight fissure carbide burs
Made up of tungsten carbide.
Used for 1.6mm diameter(1/16"
inch),suitable to high speed
handpiece,used in dental clinic.
Two kinds of toothing type:
plain cut and cross cut .
Restoration Shofu or
Equivalent 1 UNIT
289 Ball end fissure carbid bur
Endo Access Burs are
endodontic burs which used in
access cavity preparation in
endodontic therapy. These
endodontic carbide burs are
made of superior quality
material and can aid in
preparation of a perfect access
cavity. The endo burs have a
latch type bur attachment and
can be attached to a compatible
contra angle handpiece.
Restoration Shofu or
Equivalent 1 UNIT
290 Cellophane sheets
Thin,transparent sheet made up
of cellulose. Designed for
placement between the two
halves of the flask when
packing acrylic to prevent the
acrylic resin from adhering to
the acrylic in the flask.
Complete
Denture
Ainsworth or
Equivalent
1000 SHEETS
IN A PACKET
291 Teeth set partial
Acrylic teeth for use in denture.
A1, A2 and A3 shades
including large, medium and
small sizes.
Complete
Denture
Acryrock or
Equivalent
SET OF
ANTERIOR
AND
POSTERIOR
TEETH
292 Ortho wire (21 gauge) For orthodontic treatment. 100
meters Orthdontics
J J Orthdontics or
Equivalent 100 meters
293 Ortho wire (22 gauge) For orthodontic treatment. 100
meters Orthdontics
J J Orthdontics or
Equivalent 100 meters
294 Ortho wire (23 gauge) For orthodontic treatment. 100
meters Orthdontics
J J Orthdontics or
Equivalent 100 meters
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 39 of 44
295 Base plate Used for making base plates for
complete dentures
Complete
Denture
Pyrex or
Equivalent 10 pcs
296 Pumice powder
The pumice is available in four
grades of coarseness (Flour 2F,
Fine F, Medium 0-1/2, Coarse
0-3/4) and three different sizes
(5 lbs., 25 lbs., 50 lbs)
Complete
Denture
Neelkanth or
Equivalent 500 gms
297 French Chalk powder For polishing teeth Complete
Denture
Walsh or
Equivalent 1 kg
298 Silicone finishing wheel
(Rough blue)
220 grit. Smoothening and
polishing porclein and acrylic
teeth. Made up of silicone
carbide abrasive in synthetic
rubbers. Should be able to make
excellent finishes with long
wear.
Finishing and
Polishing
Taboon/ Keystone
or Equivalent 10 pcs
299 Silicone finishing wheel (Soft
pink)
240 grit. Smoothening and
polishing porclein and acrylic
teeth. Made up of silicone
carbide abrasive in synthetic
rubbers. Should be able to make
excellent finishes with long
wear.
Finishing and
Polishing
Taboon/ Keystone
or Equivalent 10 pcs
300 Silicone finishing wheel
(Smooth white)
Super soft. Smoothening and
polishing porclein and acrylic
teeth. Made up of silicone
carbide abrasive in synthetic
rubbers. Should be able to make
excellent finishes with long
wear.
Finishing and
Polishing
Taboon/ Keystone
or Equivalent 10 pcs
301 Silicone finishing cone (Soft
pink)
For polishing ceramic
composite acrylics alloys and
gold. Creats high gloss finish on
zirconia metal. For intra oral
polishing.
Finishing and
Polishing
Taboon/ Keystone
or Equivalent 10 pcs
302 Silicone finishing cone
(Rough blue)
For polishing ceramic
composite acrylics alloys and
gold. Creats high gloss finish on
zirconia metal. For intra oral
polishing.
Finishing and
Polishing
Taboon/ Keystone
or Equivalent 10 pcs
303 Silicone finishing cone
(smooth white)
For polishing ceramic
composite acrylics alloys and
gold. Creats high gloss finish on
zirconia metal. For intra oral
polishing.
Finishing and
Polishing
Taboon/ Keystone
or Equivalent 10 pcs
304 Nitrile gloves
Latex free, powder free, finger
textural for additional gap, CE
& ISO certified
Non-allergenic
gloves due to
latex allergy
Kanam Latex or
Equivalent
200 pcs/box
(Size
6,6.5,7,7.5,8)
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 40 of 44
305 Breathable adhesive dressings
made up of non-woven fabric
lightly stretchables in both
directions, soft comfortable.
water repellent resistant coated
with skin friendly
Post-operative
dressings with
the ability to be
retained on
facial hair
Surgiwear G Dress
or Equivalent
100pcs/box
(size 6*5,
8.5*6.5,
14*17cm)
306 Oxidized regenerated cellulose
Helpful in continous oozing,
absoption time 7-14days, self
life 5yrs
Hemostasis Surgicel or
Equivalent
12
hemostat/box
(size 2x, 3x)
307 Absorbable gelatin sponge
water-insoluble, porcine gelatin
absorbable sponge use by
applying to a bleeding surface,
able to cut without fraying
Hemostasis Gelfoam or
Equivalent
6pcs/box (size
8*12.5cm)
308 Botroclot hemocoagulase 0.2 iu lotion for
topical solution Hemostasis
Juggat pharma or
Equivalent 10ml bottle
309 Tranexamic acid Tablet +
Liquid
used to treat heavy bleeding
antifibrinolytic Hemostasis
Lysteda or
Equivalent
Inj 500mg in 5ml
amp
310 Feracrylum 1% w/w gel stop oozing of blood
physical brain mild antiseptic Hemostasis
Sepgard/themis or
Equivalent 15gm gel/tube
311 Corrugated silicone drain 100 medical grade silicone, size
8mm/11mm
Permitting pus
drainage
Surgiwear or
Equivalent
180pcs/box (size
580x385x325mm
)
312 Raney clips for prevention of bleeding of
scalp
Scalp flap
hemostasis
B.Brawn/Surgiwear
or Equivalent 10 clips/box
313 Eye shield plastic Acrylic plastic ventilated clear
eye shield
Protection of
reduced
zygomatic arch
Microtrack surgical
or Equivalent
25pcs/box (size
12x8x0.3cm)
314 Mops
make up of surgical cotton
gauze chemical free low linting
of shield fibrous radiopaque
thread containg barium
sulphate, super absarbent
For use in major
surgery
Surgicalwear sons or
Equivalent
100pcs/box (size
11x11cm,
22x22cm)
315 Vacuum drain
redon chain catheter kink
resistance tube with radiopaque,
satin smooth eyes line
Post-operative
drain
Romsons or
Equivalent
1pc (size 10 to 18
Fg.)
316 Collagen sheet prepared from bovine collagen
tissues
Coverage of raw
mucosal wound
Medlife or
Equivalent 10 sheet/pkt
317 Eye ointment - neosporin neomycin polymyxin bacitracin
eye ointment
Corneal
protection in
orbital surgery
GSK or Equivalent 3.5gm/tube
Stores Officer (H)
AIIMS, Raipur (C.G.)
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 41 of 44
Technical Bid
The following documents are required to upload by the Bidder along with Technical
Bid as per the tender document:
a) Scanned Copy of EMD Cost must be uploaded.
b) Please mention that the bidder is Manufacture /Distributor /Dealer /
Trader/Supplier relevant document should be uploaded.
c) In case of distributor/dealer/trader/supplier must be upload tender specific
authorization certificate from OEM/ manufacturer (Form D) should be uploaded.
d) Copy of PAN Card should be uploaded.
e) Firm/Company registration certificate should be uploaded.
f) The GST registration details may please be furnished.
g) In the event of increase in price detailed justification and supporting
evidence may be submitted for our consideration.
h) Income Tax Return of last three years should be uploaded.
i) Tenderer must provide evidence of experience/supplied materials as mentioned in
tender document should be uploaded
j) Annual turnover & balance sheet of last three year duly certified by CA as
mentioned in tender document should be uploaded.
k) “Declaration by the Bidder “(Form B) should be uploaded as mentioned in tender
document should be uploaded.
l) Relevant brochure/catalogue pertaining to the items quoted with full specifications
etc.
m) Tenderer must provide a certificate on letter head that proprietor/firm has never
been black listed by any organization should be uploaded.
n) Form A with duly filled by bidder should be uploaded.
o) Technical Specifications Compliance Report.
p) Have you previously supplied these items to any government/ reputed private
organization? If yes, attach the relevant poof. Please provide a certificate on letter
head that you have not quoted the price higher than previously supplied to any
government Institute/Organisation/reputed Private Organisation or DGS&D rate in
recent past. If you don’t fulfil this criteria, your tender will be out rightly rejected.
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 42 of 44
Annexure - II
TECHNICAL BID
One Year Rate Contract for Dental Consumable Item from ECL for DENTISTRY
Department at All India Institute of Medical Sciences, Raipur (C.G.)
S.
No
.
Name of the
Consumable Item
HSN
Code
Name of
Brand/
Company
Quoted
Indian/
Imported/
Country of
Origin
Catalogues
YES/NO
Sample
Yes /
No
Deviation to
specificatio
n if any
with reason
1. Item Details as per
Annexure-I
Place: ……………… (Signature of Bidder with seal)
Date: ……………… Name:
Seal:
Address:
Contact No. :
Email ID:
NIT No. : AIIMS/R/HS/DEN_CONSUMABLE/2019/03/RC/
Page 43 of 44
Annexure-III
PRICE BID
Price bid in the form of V3.1_BOQ_ItemWise_Template.xls
Tender No.: AIIMS/R/HS/Radio/17/306/RC/ ================================================================================================================================================
Seal & Sign of the bidder ………….…….. Page 44 of 44
Declaration by the Bidder:
1. This is to certify that I/We before signing this tender have read and fully understood all the terms and conditions contained in Tender document regarding terms & conditions of the contract, Consumable Item for Radiodiagnosis Department. I/we agree to abide them.
2. No other charges would be payable by Client and there would be no increase in rates during the Contract period.
Place: ……………… (Signature of Bidder)
with seal)
Date: ……………… Name:
Seal:
Address: