Differences Between OCIMF 2009 and OCIMF 1991 - baixardoc

10
Division ContiTech of Continental AG Q1-0185 LRQ 4000491 Differences Between OCIMF 2009 and OCIMF 1991

Transcript of Differences Between OCIMF 2009 and OCIMF 1991 - baixardoc

Division ContiTech of Continental AG Q1-0185 LRQ 4000491

Differences Between OCIMF 2009 and OCIMF 1991

Division ContiTech of Continental AG Q1-0185 LRQ 4000491

Differences Between OCIMF 2009 and OCIMF 1991

• Old

– Guide to Purchasing, Manufacturing and Testing of Loading and Discharge Hoses for Offshore Moorings – Fourth Edition 1991

• New

– Guide to Purchasing and Manufacturing Hoses for Offshore Moorings – Fifth Edition 2009

Division ContiTech of Continental AG Q1-0185 LRQ 4000491

Differences Between OCIMF 2009 and OCIMF 1991

• Foreword

– Definitions added to clarify terms used

– Clarification on Double / Single Carcass

Division ContiTech of Continental AG Q1-0185 LRQ 4000491

Differences Between OCIMF 2009 and OCIMF 1991

• Technical Requirements – 19 & 21 Bar operating pressures

– 21m/s flow velocity

– Aromatic content 50%

– Internal galvanisation

– Axial load capability

– Lining thickness

– Bolt clearances

– Weld / MPI requirements for hoses with rings

– Requirements for hoses with nipple-less flanges

– Changes to lifting lug SWL and orientations

Division ContiTech of Continental AG Q1-0185 LRQ 4000491

Division ContiTech of Continental AG Q1-0185 LRQ 4000491

Differences Between OCIMF 2009 and OCIMF 1991

• Technical Requirements – 19 & 21 Bar operating pressures

– 21m/s flow velocity

– Aromatic content 50%

– Axial load capability

– Lining thickness

– Bolt clearances

– Weld / MPI requirements for hoses with rings

– Requirements for hoses with nipple-less flanges

– Internal galvanisation

– Changes to lifting lug SWL and orientations

– Double carcass definition

– Reeling hose section added

– Offshore LPG hose section added

Division ContiTech of Continental AG Q1-0185 LRQ 4000491

Differences Between OCIMF 2009 and OCIMF 1991

• Acceptance Tests – Material Testing on lining and cover every three months

– Traceability

– Stiffness Test Method changed

– Torsion Test (Optional)

– Tensile Test (Optional)

– Proof Pressure Test (1.5 x WP)

– Continuity Test

– Lifting Lug Test

– Manufacturer's Report expanded

– Branding – Double or Single Carcass

Division ContiTech of Continental AG Q1-0185 LRQ 4000491

Differences Between OCIMF 2009 and OCIMF 1991

• Prototype Tests – Clarification of when a new prototype test is required

– Prototyping on 600mm & 300mm hoses

– Material Testing on Lining and Cover

– Torsion Test

– Tensile Test

– Dynamic Test

Division ContiTech of Continental AG Q1-0185 LRQ 4000491

Division ContiTech of Continental AG Q1-0185 LRQ 4000491

Differences Between OCIMF 2009 and OCIMF 1991

• Prototype Tests – Clarification of when a new prototype test is required

– Prototyping on 600mm & 300mm hoses

– Material Testing on Lining and Cover

– Torsion Test

– Tensile Test

– Dynamic Test

– Crush Test

– Destructive Lifting Lug Test