CHEVROLET PARTS AND ACCESSORIES CATALOG
-
Upload
khangminh22 -
Category
Documents
-
view
0 -
download
0
Transcript of CHEVROLET PARTS AND ACCESSORIES CATALOG
CHEVROLET PARTS AND ACCESSORIES CATALOGYEAR MODEL DESCRIPTION PART
USED LIST
5.000 BRAKE CONVERSION UNIT-SHOE UNIT-DRUM, H.D. Brake/Suspension
57-62 CORVETTE .................... ....................................*NOTE: Consists of Drums, Fans and self-adjusting brake kits.
3823053* 1 316.25
57-62 CORVETTE .................... SHOE UNIT, left, front................ 5462250At 1 50.4557-62 CORVETTE .................... SHOE UNIT, right, front............... 546225lAt 1 50.4557-62 CORVETTE .................... SHOE UNIT, left, rear ................ 5462252At 1 53.4557-62 CORVETTE .................... SHOE UNIT, right, rear ............... 5462253At 1 50.45ANOTE: Includes automatic adjusting parts.
57-62 CORVETTE .................... DRUM, front ......................... 3824056t 2 22057-62 CORVETTE .................... DRUM, rear.......................... 3824057t 2.
22.00tNOTE: Used with Heavy Duty Brake Conversion Unit 3823053.
5.001 PLATE ASSEMBL Y-SUPPO R T- P LATE-BRACKET, Brake Flange Front
Front39 COE,40-46 W, Y, M, 0 w/H.D. front axle
(see note Group 6.008),46-49 SBC, 2 TON (1st design) ......... front (2314 dia, hole) ................ 3650720* 2 4.05
*NOTE: On 1946-49 models enlarge 4 holes to 9/ 6 I. D.
46-52 3/4 TON (exc. D-D) ............... front.............................. 3691418 2 2.2549-50 PASS . ......................... front.............................. 3687700 2 3.3949-50 SBC, 2 TON (2nd design),
51-52 UTILITY ....................... front(23/e dia. hole) ................. 3691427 2 4.3051-54 PASS.,53-62 CORVETTE (exc. H.D. Brake/Susp.) front ............................. 3694865 2 3.3951-55 '/2 TON (1st Ser.) ................ front.............................. 3694867 2 3.6053-59 '/4 , 1 TON (exc. D-D) ............. front (four attaching holes Vi
z) ........ 3698327 2 5.6553-63 D-D (exc. 2 TON, Ser. 10) ........ front (four attaching holes'/,6)........ 3698345 2 5.3053-55 1'4 TON (1st Ser.) (exc. H.D.,SBC) front . ............................. 3698979 2 8.3553-55 1'4 TON w/H.D. (1st Ser.),53-55 2 TON (1st Ser.),55 SBC (1st Ser.) .................. front .............................. 3698988 2 9.7555-57 PASS . ......................... front,left......................... 3707945t 1 4.5555-57 PASS . ......................... front, right ........................ 3849355 1 4.55
tNOTE: Upper knuckle attaching holes purposely omitted on late assemblies, interchange-ability not affected.
55-59 '/ TON (2nd Ser.) ................ front.............................. 3714707 2 4.3057-59 Ser. 3A w/4/WD ................. front (NAPCO 38-395).............. 3749124 2 5.8057-59 Ser. 3E, 3G w/4/WD ............. front (Bendix 307832) ............... 3750738 2 8.7057-62 CORVETTE w/H.D. Brake/Susp .. front, left ......................... 3745559 1 28.3057-62 CORVETTE w/H.D. Brake/Susp... front, right ........................ 3745560 1 28.3058 PASS .......................... front,left......................... 3741831 1 4.2458 PASS .......................... front,right........................ 3741832 1 4.2459-64 PASS.,63-65 CORVETTE .................... front, right ........................ 3858826 1 5.1559-62 PASS.,65 CORVETTE .............. . ..... front, left 3858825 1 5.1560-61 Ser. 10 (exc .4/WD) .............. front,left......................... 3766693 1 4.6060-61 Ser. 10 (exc. 4/WD) .............. front, right ........................ 3766694 1 4.6060-63 Ser. 10 (4/WD) .................. front, right (Bendix 310398) .......... 2408306 1 6.5060-63 Ser. 10 (4/WD) .................. front, left (Bendix 310397)........... 2408307 1 6.5060-63 Ser. 20 (4-WD) ................. front (2 x 12%q) (Bendix 311035) ...... 2415061 2 8.5560-62 Ser. 20 thru 30 (exc. 4/WD, D-D) .. front, left ......................... 3761007 1 5.6560-65 Ser. 20-30 (exc. D-D, 4-WD) ....... front, right ........................ 3817978 1 5.9562-63 Ser. 10 (exc. 4/WD) .............. front, left ......................... 3818707 1 3.6063 SPT. CPE., (409) (RPO Z11),63-64 CORVETTE w/Sp. Per........... front, left ......................... 3841827 1 28.3063 SPT. CPE. (409) (RPO Z11),63-64 CORVETTE w/Sp. Per........... front, right ........................ 3841828 1 28.3062-63 Ser. 10 (exc, 4-. WD) .............. front,right......................... 3902998 1 3.6063-65 Ser. 20-30 (exc. D-D, 4-WD)....... front, left ......................... 3817977 1 5.9563-64 PASS., CORVETTE (exc. Sp. Per.) front, left ......................... 3820273 1 5.00©-1967Chevrolet Motor Division 5.000-5.001General Motors Corporation 823
64-68 Ser. 10 (4-WD) .................. front .............................. 3851799 2 9.3064-68 Ser. 10 (exc. 4/WD) .............. front, left ......................... 3849353 1 3.2564-68 Ser. 10 (exc. 4/WD)..... ....... front, right ........................ 3849354 1 3.2564-67 Ser. 20-30 (D-D) (exc. 11,000 lb.
axle) ........................ front .............................. 3843196 2 5.3066-68 Ser. 20-30 (exc. D-D, 4/WD),68 Ser. 20-30 (D-D) ................. front. left ......................... 3882781 1 5.6566-68 Ser. 20-30 (exc. D-D, 4/WD),68 Ser. 20-30 (D-D) ................. front, right ........................ 3882782 1 5.6564-65 G-10........................... front,left......................... 3833433 1 5.4064-67 G-10 ........................... front, right ........................ 3882728 1 5.6066-67 G-10 ........................... front, left ......................... 3882727 1 5.6064-68 Ser. 20 (4/WD) .................. front, left (Bendix 314765) ........... 2461046 1 15.7564-68 Ser. 20 4/WD ................... front, right (Bendix 314766) .......... 2461047 1 15.7565-68 PASS. (exc. Disc Brakes) ........ front, right ........................ 3898022 1 4.7565-68 PASS. (exc. Disc Brakes) ........ front, left ......................... 3898021 1 4.7567-68 G-20 ........................... front .............................. 3889557 2 5.6567 Ser. 30 w/11,000 lb. axle......... front .............................. 3873500 2 15.9568 G-10 ........................... front L.H.......................... 3931131 1 5.7568 G-10 ........................... front R.H.......................... 3931132 1 5.7565-67 CORVETTE w/H.D. Brakes ...... SUPPORT, front, left, brake caliper
adapter bracket .................... 3882783 1 6.3065-67 CORVETTE w/H.D. Brakes ...... SUPPORT, front, right, brake caliper
adapter bracket .................... 3882784 1 6.3068 CORVETTE w/H.D. Brake ....... SUPPORT, fornt L.H. brk. caliper
adapter bracket .................... 3925397 1 10.2568 CORVETTE w/H.D. Brake ....... SUPPORT, front R.H. brk. caliper
adapterbracket .................... 3925398 1 10.25
Rear
38-50 UTILITY .......................38-50 UTILITY
46-52 '/4 TON.........................46-52 3/4 TON.........................51-54 PASS.,53-55 CORVETTE,51-55 Y TON (1st Ser.) ................51-55 UTILITY (1st Ser.) ..............15-55 UTILITY (1st Ser.) ..............53-59 '/4 TON (exc. Prop. Brake,
7 x 17.5 tires),60-67 Ser. 2 0 (D-D) w/3-SPD.,60-67 Ser. 20 (4/WD) ........... . ..... .53-59 '/4 TON (exc. Prop. Brake
7 x 17.5 tires),60-67 Ser. 20 (D-D) w/3-SPD.,60-67 Ser. 20 (4/WD) ............... .53-55 1 TON (1st Ser.) (exc. Prop.
Brake),54-55 1 TON w/Prop. Brake (1st Ser.),55-59 1 TON (2nd Ser.),55-57 D-D w/7.50-17, 7.00-18 tires
(2nd Ser.),56-59 D-D w/8-19.5 tires,56-59 D-D w/14" Brake or Duals ........53-59 1 TON,55-57 D-D w/7.50-17, 7.00-18 tires
(2nd Ser.),56-59 D-D w/8-19.5 tires,56-59 D-D w/14 brake or duals .........55-58 PASS.,55-62 CORVETTE (exc. H.D.,
Brake/Susp.),55-58 1
/ TON (2nd Ser.) (exc. P/Trac.) ..55-58 PASS.,55-62 CORVETTE (exc. H.D.
Brake/Susp.),55-58 V2 TON (2nd Ser.) (exc. P/Trac.) ..
rear, left (w/wheel cyl. adj. shaft,pinion and spring) ............... 592169 1 6.80
rear, right (w/wheel cyl. adj. shaft,pinion and spring) ................ 592170 1 6.80
rear, left .......................... 3680947 1 2.80rear, right ......................... 3680948 1 2.80
rear, left .......................... 3693451 1 4.38rear, left (w/hold down bolt nut) ...... 3698357 1 15.95rear, right (w/hold down bolt nut)..... 3698358 1 15.95
rear, left .......................... 3843627 1 5.30
rear, right ......................... 3843628 1 5.30
rear, left .......................... 3717669 1 8.35
rear, right ......................... 3717670 1 8.35
rear, left .......................... 3708841 1 4.10
rear, right ......................... 3708842 1 4.10
5.001 ©_1967Chevrolet Motor Division
824 General Motors Corporation
55-59 '/, TON w/Prop. Brake (2nd Ser.)(exc. D-D w/7.50-17 tires, duals,14" brake),
60-62 Ser. 20 (D-D) (exc. 3-SPD.),63 Ser. 20 (D-D) w/3-SPD., 4-SPD.,64 Ser. 20 (D-D) w/3-SPD. H.D.,
4-SPD ........................ rear .............................. 3843629 2 5.3057-62 CORVETTE w/H.D. Brake/Susp... rear, left . ......................... 3745613 1 20.1557-62 CORVETTE w/H.D. Brake/Susp. • . rear, right ......................... 3745614 1 20.1558-59 '/ TON w/P/Trac ........... .... rear,left.......................... 2346817 1 7.0058-59 Y TON w/P/Trac ............ ... rear,right......................... 2346816 1 7.0059 PASS., '/ TON (exc. '/z TON
w/P/Trac.),60-62 PASS., Ser. 10,63 PASS.,63 Ser. 10 (4-WD) (1st Ser.) .......... rear, left .......................... 3896883 159 PASS., Y TON (exc. '/2 TON
w/P/Trac.),60-62 PASS., Ser. 10,63 Ser. 10 (4/WD) (1st Ser.),63 PASS . ......................... rear, right ......................... 3896884 160-64 Ser. 20 (exc. 3-SPD. H.D., 4-SPD.,
D-D, 4/WD) .................. rear, left.......................... 3760201 1 5.4060-64 Ser. 20 (exc. 3-SPD. H.D., 4-SPD.,
D-D 4/WD) ................... rear,right......................... 3760202 1 5.4060-64 Ser. 20 w/3-SPD. H.D., 4-SPD.
(exc. D-D, 4/WD) ............. rear,left.......................... 3760213 1 5.4060-64 Ser. 20 w/3-SPD. H.D., 4-SPD.
(exc. D-D, 4/WD) ............. rear,right......................... 3760214 1 5.4060-66 Ser. 30 ......................... rear .............................. 3856828** 2 8.30
*NOTE: On models prior to 1965, 3856834 anchor pin must also be used.63-65 CORVETTE (exc. Sp. Per.)....... rear, left .......................... 3847719 1 4.2563-65 CORVETTE (exc. Sp. Per.) ....... rear, right ......................... 3847720 1 4.2563-64 CORVETTE w/Sp. Per. .......... rear, left .......................... 3847721 1 20.1563-64 CORVETTE w/Sp. Per ......... rear, right ......................... 3847722 1 20.1563 Ser. 10 (exc. 4/WD),63 Ser. 10 (4/WD) (2nd Ser.) ......... rear, left (fused center) ............. 3838241 1 5.2063 Ser. 10 (exc. 4/WD),63 Ser. 10 (4/WD) (2nd Ser.) ......... rear, right (fused center) ............ 3838242 1 5.2063 Ser. 10 ......................... rear, left (bolted center)............. 3859655® 1 5.9563 Ser. 10 ......................... rear, right (bolted center)............ 3859656® 1 5.95®NOTE: Use with differential carriers 3847754 on ser. 10 (exc. 4/WD), and 3847755
on ser. 10 (D-D) for 1963 models only.64-68 PASS . ......................... rear,left.......................... 3847723 1 4.2564-68 PASS . ......................... rear, right......................... 3847724 1 4.2564-66 (4/WD),64-66 Ser. 10 (exc. leaf type springs),67-68 Ser. 10, G-20 ................... ...............rear, left . .. . .. . . . .. 3840929 1 4.9564-66 (4/WD),64-66 Ser. 10 (exc. leaf type springs),67-68 Ser. 10, G-20 ................... rear,right......................... 3840930 1 4.9564-68 G-10 w/3.36-4.11 ratio........... rear,]eft .......................... 3839421 1 4.0164-68 G-10 w/3.36-4.11 ratio........... rear, right ......................... 3839422 1 4.0164 G-10 (exc. 3.36 ratio)............ rear, left .......................... 3853837 1 4.9564 G-10 (exc. 3.36 ratio)............ rear, right ......................... 3853838 1 4.9565-67 Ser. 20 (exc. D-D, 4/WD, leaf type
springs) ...................... rear,left.......................... 3857067 1 5.4065-67 Ser. 20 (exc. D-D, 4/WD, leaf type
springs) ...................... rear,right......................... 3857068 1 5.4065-66 Ser. 10 w/leaf type springs (exc.
4/WD) ....................... rear,left.......................... 5465066• 1 7.8565-66 Ser. 10 w/leaf type springs (exc.
4/WD) ....................... rear, right ......................... 54650670 1 7.8565-66 Ser. 20 w/leaf type springs (exc.
4/WD) ....................... rear, left.......................... 5465068• 1 13.5065-66 Ser. 20 w/leaf type springs (exc.
4/WD) ...................... rear, right......................... 5465069• 1 13.5067 Ser. 30 (exc. 11,000 lb. axle) ..... rear, left .......................... 3898049 1 7.7567 Ser. 30 (exc. 11000 lb. axle) ...... rear, right ......................... 3898050 1 7.7567 Ser. 30 w/11000 lb. axle)......... rear, left .......................... 3901219 1 15.0067 Ser. 30 w/11000 lb. axle)......... rear, right ......................... 3901220 1 15.00
©-1967Chevrolet Motor Division 5.001General Motors Corporation 825
65-67 CORVETTE ................... .65-67 CORVETTE ....................65-67 CORVETTE ....................65-67 CORVETTE ....................65-67 CORVETTE ....................65-67 CORVETTE ....................67 PASS. w/Disc. Brake adapter .....67 PASS. w/Disc. Brake adapter .....68 CORVETTE ....................68 CORVETTE ....................
PLATE, parking, left ................. 5465982 1 4.25PLATE, parking, right ................ 5465983 1 4.25BRACKET, left rear caliper adapter .... 3864113 1 9.95BRACKET, right rear caliper adapter ... 3864114 1 9.95BRACKET, left front caliper adapter .... 3864115 1 3.25BRACKET, right front caliper adapter ... 3864116 1 3.25BRACKET, left front caliper ........... 3898013 1 2.65BRACKET, right front caliper.......... 3898014 1 2.65BRACKET, front L.H. caliper adapter... 39284649 1 3.25BRACKET, front R.H. caliper adaoter... 3928650 1 3.25
5 .00 2 BOLT-SHIELD-COVER-SPACER-GASKET-NUT, Flange Plate
38-39 ALL (exc. HA, JA, COE),40-42 WB, WC, YR, YS, YT, MR, MS
(exc. H.D.),40-52 COMM., WA (exc. D-D),46-50 1'/2 TON (exc. SBC, H.D.) ........53-59 '/ TON ........................38-42 UTILITY (exc. COE, H.D.),46-50 1''z TON (exc. SBC) ..............46-52 'M 1 TON (exc. D-D) .............39-48 PASS. (exc. JB, KB) ............40 KB,51-54 PASS.,53-62 CORVETTE (exc. H.D.
Brake/Susp.) .................46-52 3/4 1 TON,53-62 3/4 TON (exc. 14 1 ' brake) ..........46-50 D-D, SBC, 2 TON ...............51-52 D-D, UTILITY ..................46-50 SBC, 2 TON ....................51-52 UTILITY .......................51-54 PASS ..........................53-62 CORVETTE ....................51-53 '/2 TON .........................51-55 UTILITY (1st Ser.) .............53-59 ?4, 1 TON (exc. D-D) ............53-55 ?a, 1 TON (1st Ser.) (exc. D-D) ...53-63 D-D (exc. Ser. 10) ...............53-64 D-D (exc. Ser. 10) ...............53-56 1 TON,58-59 1 TON,55-62 D-D w/14" brake (2nd Ser.) .......53-55 1 1/2 TON (1st Ser.) (exc. SBC, H.D.)53-55 1'h TON (1st Ser.) (exc. SBC, H.D.)53-55 1'2 TON w/H.D. (1st Ser.),53-55 Ser. 4 (SBC) (1st Ser.) ...........53-55 Ser. 5-6 (lst Ser.),53-55 1'2 TON w/H.D. (1st Ser.),67 Ser. 30 (D-D) w/11,000 lb. axle...53-55 Ser. 4 (SBC) (1st Ser.),53-55 Ser. 5-6 (lst Ser.),67 Ser. 30 (D-D) w/11,000 lb. axle ...54-55 ' Z TON (1st Ser.) ................55-62 PASS.,63-64 PASS., CORVETTE,65 CORVETTE (exc. disc. brakes).55-62 PASS.,63-64 PASS., CORVETTE,65-67 CORVETTE (exc. disc. brakes) ...55-64 PASS.,56-62 CORVETTE ....................55-62 PASS . .........................55-59 1/z TON (2nd Ser.) ...............55 'i TON (2nd Ser.) ................55-59 3/4 , 1 TON (2nd Ser.) (exc. D-D) .. .58-59 'i TON w/P/Trac,65 Ser. 10 w/leaf type springs .......
frt. flange, short ('/ 6 -20 x 2°/32 hex.head) ........................... 3708832 4 .20
plate to strg. knuckle (418 O.L.,w/ 14-20 thds. on both ends) ....... 596565 4 1.50
plate and strg. arm to strg. knuckle( r/ b -20 x 2 47/64 hex. head) ......... 599843 4 .25
frt. flange, short ('/ 6 -20 x 2 hex. hd.) 3693612 4 .15
rear flange to hsg. ( 14-20 x 1-300M) . . 217208 8 (8.900)
flange (4Y long w/ 94 6 -18 thds. oneend-'4-20 other end) ............. 3678198 4 1.50
flange (314 long w/g4 6 -18 thds, one end
'/ -20 other end) ................ 3678199 4 1.50frt. flange, long ('/ 6-20 x 2146
hex. hd) ......................... 3693621 4 .15frt. flange, long ('/-20 x 3B144
hex, hd,) ........................ 3694247 4 .40rear flange (°/ 6 -18 x 1'% hex, hd.) .... 3750740 12 .50frt. flang, short ( 1/2-20 x 1 1/2) ......... 3697429 4 .20frt. flange, long ( 1/2-20 x 2 3/4) ........ 3697430 4 .20frt. flange, short (°/16 -18 x 1 3/4) ....... 3697447 4 .35frt. flange, long (°/16-18 x 2 15/,) ...... 3697448 4 .40
rear flange to hsg. ( 14-20 x 1'/) ...... 453125 A.R.(8.900)
frt. flange, short ( 1/2-20 x 1 3/4 hex. hd.) 3698982 4 .20frt. flange, long ( 1/z-20 x 3 1/3, hex. hd.) 3698983 4 .20
frt. flange, short ( 9/,,,-18 x 2 1/, hex.
hd.) .............................. 3698992 4 .40
frt. flange, long (°/ 6 -18 x 37
/„ hex. hd.) 3698993 4 .50frt. flange, long ('/,-20 x 4344 hex. hd.) 3708833 4 .40
front flange, short ('4,,-20 x 1 31/„) , , , , 3748370 2 .20
front flange, long ('/ 6 -20 x 2 15/64 ) 3748401 2 .20
rear flange plate ( ;/8 -24 x 13/6)....... 3788231 8 .15plate to steering knuckle ('/-16 x 1 1/2) 454906 A.R.(8.900)frt. flange, long ( 1/z-20 x 4 s/,,) ....... 3712916 4 .40rear flange ('4-24 x "4,) ......... _ .. 3697704 8 (5.531)frt. flange, long ( 1/2-20 x 2'/,) ........ 3713022 4 .20
rear flange ('/-20 x 1'/4) ............. 2346841 8 .28
5.001-5.002
4-1967Chevrolet Motor Division
826 General Motors Corporation
64 CORVETTE w/Sp. Per........... plate to steering knuckle ( 1/4-20 X
5/ 6) . 3770308 6 (0.206)64-67 Ser. 20-30 (D-D) (exc. 11,000 lb
axle) ........................ front flange (long) ('/ 6-18 x 3!i,) ..... 3843236 4 .4064-68 G-10 ........................... frt.flange plate to brake assy.('/ 6-20 x 2'/,) .................... 3882722 4 .1565-68
65-67PASS . .........................PASS
front flange plate (14-20 x 24 hex. hd.) 3871512 A.R. .20. ............... . frt. flange plate (
1/-20 x 25/32
hex. hd.) 3871554* A.R. .20*NOTE: Do not use std. part in place of 387155463-64 CORVETTE,65 CORVETTE (exc. disc, brakes). .. rear flange elate ('G-24 x 2'/, r a k4
5.004 BRACKET, Front Broke Flange Radius Rod
38 HA ............................ left (forged 475545) ................. 475545 1 2.26©-1 967Chevrolet Motor Division 5.002-5.004General Motors Corporation 827
5.017 SHOE, Brake, with Facing
38-50 PASS., 'i TON (exc. FC),38-42 '/4 TON (exc. JE, KE, AM, BM) .... front and rear,38-42 HE, JE, KE, KF, AM, AN, BM, BN,46-52 % TON (exc. D-D) ............... front (bonded type) ................. 3681129 A.R. 2.5238-50 PASS., '/, TON,38-42 '
44 TON (exc. JE, KE, AM, BM).... front and rear,
38-42 HE, JE, KE, KF, AM, AN, BM, BN rear,39 COE,40-52 UTILITY ....................... front (riveted type) ................ 369459Q® 4 4.2539 COE,40-50 UTILITY ....................... rear ............................. 3660048 4 5.90
®NOTE: Also used on V, W equipped w/cast iron brake drums.46-52 3 TON ......................... rear,46-52 1 TON, D-D .................... front (bonded type) ................. 3681116 A.R. 4.2546-52 1 TON ......................... rear (bonded type).................. 3681166 4 5.5046-52 1 TON ......................... rear (bonded type) (.030 O.S. facing).. 3697830 4 4.8051-55 UTILITY (1st Ser.) .............. rear (color ident.) .................. 3720010 4 8.15
SHOE UNIT, Broke, with Facing, Non-Metallic
51-58 PASS.,51-59
/2 TON (exc. 3A w/4/WD),
60-62 Ser. 10 (exc. 4/WD),53-62 CORVETTE (exc. H.D. Brake/
Susp.) ... ........... front,58-59 1/2 TON (exc. P/Trac.),59-62 PASS. (exc. H.D.),60-62 Ser. 10,63 PASS., CORVETTE (exc. Sp./Per.,
H.D.),64-67 PASS. (exc. Police, H.D.),64-65 CORVETTE (exc. Disc. Brake) ... rear (primary and secondary) ......... 3849026 1 10.7551-58 PASS., '- TON ................. rear (bonded type),53-62 CORVETTE (exc. H.D. Brake/Susp.) (primary and secondary) ............. 3752313 1 10.0551-58 PASS.,51-64 Ser. 10,53-60 CORVETTE (exc. H.D. Brake/
Susp.) ....................... front,59 z TON (exc. P/Trac.),59-67 PASS.,60-64 Ser. 10 ......................... rear (bonded type) (primary and second-64 CORVETTE .................... ary) (.030 O.S. facings—grooved) ... 3849062 1 11.3551-58 PASS., !2 TON,53-60 CORVETTE (exc. H.D. rear (bonded type) (primary and
Brake/Susp.) ................. secondary (.030 O.S. facing)....... 3754070 1 12.5053-59 '4 TON (exc. 7.50 x 17, 8 x 19.5
tires, duals, 14" brake),60-67 Ser. 20 (4/WD, D-D) ............. rear (primary and secondary),53-59 3/,, 1 TON,60-63 Ser. 20-30 (D-D),64-67 Ser. 30 (D-D),64-67 Ser. 20 (4/WD, D-D) ............. front (primary and secondary) ........ 3848106 1 17.6053-59 1 TON,55-59 D-D w/7.50 x 17 tires, duals, 14" rear (riveted type) (primary and
brake........................ secondary) ...................... 3742396 1 21.0057-59 Ser. 3A w/4WD .................. front (primary and secondary) ........ 3750757T 1 12.6557-59 Ser. 3E, 3G w/4WD .............. front (primary and secondary) ........ 3751486t 1 15.50
TNOTE: Facings must not be mixed on any one axle.53-55 UTIL (1st. Ser.) ................. front (riveted type) (primary and
secondary) (no color ident.) ........ 3877022 1 19.5058-59 'Z TON w/P/Trac ................ rear (primary and secondary)......... 2405962 1 12.5059-68 TAXI, H.D ...................... front (primary and secondar y) ........ 3851790 1 13.3059-68 TAXI, H.D ................. .... rear (primary and secondary) ......... 3852220 1 11.4059-62 PASS.,63-68 PASS. (exc. TAXI, H.D. Chassis
Disc Brakes, Metallic Linings).. front (primary and secondary) (I1 x63-65 CORVETTE (exc. Sp./H/Per.) .... 2% lining) ...................... 3849027 3849027 1 12.3559-67 PASS . ......................... front (primary and secondary)64 CORVETTE .................... (.030 O.S.) ...................... 3849056 1 13.0060-63 Ser. 10 (4-WD) .................. front (Bendix 310621) ............... 2405958 1 14.00
5.017 ©_1967828 Chevrolet Motor Division
General Motors Corporation
60-63 Ser. 20 (4-WD) .................. front (primary and secondary) (Bendix
60-66 Ser. 30,310639) ......................... 2405960 1 21.00
67 Ser. 30 (exc, 11,000 lb. axle)P/Trac.) ..................... rear (primary and secondary)......... 3898921 1 22.5063 Ser. 10 ......................... rear,
63 Ser. 10 (exc. 4/WD) .............. front (primary and secondary) ........ 3840163 1 11.1564-68 Ser. 10 ......................... front and rear,67-6860-63
G-20 ...........................Ser. 20 (exc. 4/WD, D-D)
rear (primary and secondary)......... 3907118 1 10.9564-67
.........Ser. 20 (exc. D-D, 4/WD leaf type
rear,
springs) ...................... front and rear,60-63 Ser. 20-30 (exc. 4/WD, D-D) ...... front (primary and secondary),64-67 Ser. 30 (exc. D-D),68 Ser. 20-30 (exc. 4/WD)........... front64-65 G-10 ..........................
..............................front
3846298 1 17.75
65-68 G-10 .........................................................
front3846099 1 12.95
64 G-10,.............................. 3886395 1 14.00
65-68 G-10 w/3.36, 4.11 ratio, 2400 lb.
65-67axle .........................
CORVETTE w/H.D. Brakes ......rear (primary and secondary).........rear (bonded)
3846098 1 13.15
65 CORVETTE w/Disc Brake (exc....................... 5452515 1 N.L.
66-68 CORVETTE (exc. H.D.).......... frt. and rear (riveted) ............... 5452513* 1 18.25*NOTE: In order to service all four wheels, two units must be acquired.65-67 CORVETTE .................... parking brake ...................... 5467285 1 10.9065-66 Ser. 10 w/leaf type springs ....... rear (primary and secondary) ......... 5468092• 265-66 Ser. 20 w/leaf type springs ....... rear (primary and secondary) ........ 54658141 2 18.0065-68 CORVETTE H,D. Brakes w/Disc
67Brakes. ............
PASS. w/Disc Brakes. .....front..........front
5463160 2 75.00
67 Ser. 30 (D-D) w/11,000 lb. axle ................................
front (primary and secondary) ........54631913881471
12
18.2018.5067 Ser. 30 (D-D) w/11,000 lb. axle ... rear 3881550 1 28.8567-68 G-20 ................... front (primary and secondary) ........ 3907117 2 16.7568 PASS. w/Disc Brakes............ front .............................. 5468768 1
SHOE UNIT —SHOE ASSY., Brake, with Facing, Metallic
53-59 CORVETTE,60-62 CORVETTE (exc. H.D.
Brake/Susp.),57-58 PASS .......................... front (primary and secondary).59-68 PASS . ......................... rear (primary and secondary) (11 x 2)63-64 CORVETTE .................... (welded) ........................ 3794194 1 16.7553-62 CORVETTE,57-58 PASS . ......................... rear (primary and secondary) (11 x 1i) 3798312 1 21.3557-62 CORVETTE w/H.D. Brake/Susp . front (primary and secondary) (11 x 2Y2) 3798310 1 25.2557-60 CORVETTE w/H.D. Brake/Susp.. , rear (cerametalix type) (primary and
59-67 PASSsecondary) ............. .... 3745523 1 N.L.. ......................... front (primary and secondary) (welded)
63-64 CORVETTE .................... (11 x 2'/,)........................63-64 CORVETTE w/Sp./Per........... front (primary and secondary)3794191 1 19.25
63-64 CORVETTE w/Sp,/Per...........(11/64 x 2 3
/,) .....................rear (primary and secondary)(11"/, x 2)
38462863846287
1 33.50
63 SPT. CPE. (RPO Zll)........... SHOE ASSY., rear, primary 546419712
31.9015.6063 SPT. CPE. (RPO Z11), , , , , , , , , , , SHOE ASSY., rear, secondary 5464198 2 15.60NOTE: Metallic linings are double sintered as compared to the single and much larger
sintered cerametalix linings.
5.018 FACING UNIT, Brake Shoe
38-48 PASS., COMM...................
38-42 HE, JE, KE, KF, AM, AN, BM, BN39-40 COE,40 WB, WC w/H.D.,41-50 UTILITY ,,,,,,,,,,,,,39-40 COE,40 WB, WC w/H.D.,41-50 UTILITY,,,,,,,,,,,,,,
frt. and rear (front only on jobs w/14"rear brakes) (8 facings)........... 603872 A.R. 8.00
rear,
front............................. 605379 1 8.50
rear brake ......................... 605380 1 12.55
©-1967Chevrolet Motor Division 5.017-5.018General Motors Corporation 829
53-55 1 z TON (1st Ser.) .............. .67 Ser. 30 (D-D) w/11000 lb. axle ... .51-55 UTILITY (1st Ser.) ..............57-59 Ser. 3A w/4WD ................. .57-59 Ser. 3E, 3G w/4/WD .............58-59 Ser. 3 (exc. /2 TON),60-64 D-D (exc. Ser. 10) ...............58-59 Ser. 3 (D-D) (exc. 14" brake duals),58-59 Ser. 3E,60-67 Ser, 20 (D-D) ...................60-63 Ser. 20 (4/WD),65-67 Ser. 20 (4/WD) ..................60-66 Ser. 30 (D-D) ...................64 Ser. 20 (4/WD) ..................
58-59 '/2 TON w/P/Trac ...............60-63 Ser. 10 (4/WD) ..................60-63 Ser. 20 (4/WD) ..................
front and rear,
front .............................. 475511 A.R. .30front and rear,
rear,front .............................. 477474 A.R. .40front,rear ............................... 3680890 A.R. .50
front brake (primary and secondary)(no color ident.) .................... 3877033T 1 9.30rear brake (no color ident.) .......... 3877034t 1 19.45front, primary and secondary......... 3750754f 1 7.10front, primary and secondary ......... 3750750t 1 7.10
front brake (rivited type),
front and rear (primary and secondary),
rear (primary and secondary),front (primary and secondary),front and rear (primary and
secondary) ...................... 3703507 1 9.10rear brake (primary and secondary).... 2405961 1 6.20front (Bendix 310624) ............... 2405957 1 6.20front (primary and secondary) (Bendix
310642) ......................... 2405959 1 8.45
38-50 UTILITY, SD, ES, FS ............38-48 GE, HE, JE, KE, KF, AM, AN,
BM, BN, DR, ER, FR ..........51-52 UTILITY .......................51-55 UTILITY (1st Ser.),60-67 Ser. 30 .........................38-48 HE, JE, KE, KF, AM, AN, BM, BN,
DR, ER, FR,53-55 UTILITY (1st Ser.) ..............38-48 PASS.,38-39 COMM. (exc. HE, JE),40-42 KC, KD, AK, AL, BK, BL ........57-59 Ser. 3 w/Prop. Brake,60-62 Ser. 20.........................60-62 Ser. 20-30 (exc. 4/WD),63 Ser. 20-30,64 Ser. 20-30 (exc. 4/WD) ...........
front and rear,
rear only,front only ( 944 O.D. x 23
/64 O.L.w/% hd.) ........................ 354111 A.R.100/1.00
rear only ( 3/6 x 34) .................. 3694529 A.R.100/1.00
front only,
front and rear,
rear,
frt. (9/64 O.D.-2 144 O.L. w/3/e hd.)...... 3698904 44 100/1.00
5.020 PIVOT, Brake Shoe
51-55 UTILITY (1st Ser.) .............. rear.............................. 3694528 4 15
5.026 SPRING—PIN—KIT, Brake Shoe
38-42 PASS., COMM. (exc. H.D., 1 TON),46-50 PASS., Y TON ..................38-52 HE, JE, KE, KF, AM, AN, BM, BN,
DR, ER, FR, GR, HR, JR, KR..38-50 UTILITY.......................39-42 JE, KE, AM, BM,38-52 1 TON .........................51-52 UTILITY .......................46-52 1 TON, D-D ....................46-52 '/, TON .........................
5.018-5.026
©-1967Chevrolet Motor Division
830 General Motors Corporation
51-55 PASS., CORVETTE, Y TON......
56-57 PASS., CORVETTE, Y TON (exc.H.D. Brake/Susp. Ser. 3Aw/4/WD),
58-59 PASS., CORVETTE, '/ TON (exc,metallic linings, H.D. Brake/Susp.
TON w/P/Trac.),60-67 PASS., CORVETTE (exc. H.D.
Brake/Susp.),60v68 Ser. 10 thru 30 (exc. 4/WD. D-D),61-68 Ser. 10 (D-D),64-68 Ser. 10 (4-WD),67-68 PASS., (exc. TAXI, POLICE,
metallic linings, Disc brakes),67-68 G-20,68 Ser. 20-30 (D-D) .................57-59 PASS., CORVETTE, '/ TON (exc.
H.D. Brake/Susp., metalliclinings, '/ TON w/P/Trac.),
60-67 PASS., CORVETTE (exc. H.D.Brake/Susp., Disc Brake),
60-66 Ser. 10,60-67 Ser. 20 (exc. 4/WD, D-D, leaf
type springs),65-68 Ser. 10, G-20,67-68 PASS. (exc. TAXI, POLICE,
metallic linings, Disc brakes),68 Ser. 30 w/11000 lb. axle (exc. D-D)56-62 PASS.,56-62 CORVETTE (exc. metallic linings,
H.D. Brake/Susp.),56-59 '/2 TON,61-63 Ser. 10 (D-D),60-63 Ser. 10 thru 30 (exc. D-D, 4/WD),64 Ser. 30 (exc. D-D) ...............51-59 PASS., CORVETTE, 1/ TON (exc
Y2 TON w/P/Trac.),60-62 PASS., CORVETTE .............60-63 Ser. 10 (4/WD, D-D) .............60-63 Ser. 10-20 (exc. 4/WD, D-D) ......60-63 Ser. 30 (exc. D-D) ...............57-59 Ser. 3E-3G w/4/WD,60-63 Ser. 20 (4/WD) ..................65-66 Ser. 20 w/leaf type springs...... .56-62 CORVETTE w/H.D. Brake/Susp...51-55 UTILITY (1st Ser.) ..............51-55 UTILITY (1st Ser.) ..............51-55 ALL w/Prop. Brake (1st Ser.),67 Ser. 30 w/11000 lb. axle .........53-59 '/4 TON (exc. 14" brake, duals on
D-D),53-59 1 TON .........................60-68 Ser. 20-30 (D-D, 4/WD).......... ,60-68 Ser. 20 (D-D, 4/WD) ..............65-66 Ser. 30 (D-D) ...................53-55 UTILITY (1st Ser.) ..............53-59 1 TON,55 D-D w/7.50-17, 7.00-18 (2nd Ser.)56-59 D-D w/14" brake, duals (exc.
3-SPD.),67 Ser. 30 (D-D) w/11,000 lb. axle ...53-59 3/4 , 1 TON,60-63 D-D (exc. Ser. 10) ...............53-55 UTILITY (1st Ser.) ..............60-63 Ser. 30 (exc. D-D),60-63 Ser. 20 (4/WD),64 Ser. 30 .........................57-62 PASS. w/metallic linings (exc.
H.D. Brake/susp., P.G.).......57-62 PASS. w/metallic linings,59-62 CORVETTE w/metallic linings
(exc. H.D. Brake /Susp. P.G.)...
pull back, front and rear, primary andsecondary,
pull back, front, primary,
trans. park brk. shoe ................ 3694822 A.R. 27
pull back front secondary............ 3739278 2 15
adjusting screw, front and rear,rear,front and rear,front(blue) ........................ 3707417 A.R. 30
pull back, front,pullback, rear ..................... 497834 A.R. .35frontand rear ...................... 3740932 A.R. .50short, rear shoe (3'/ 6 O.L.—green) .... 3694516 A.R. .30long, rear shoe (37/8 O.L.—black)...... 3694799 A.R. .30
parking, outer shoe ................. 3695836 1 .10
pull back, front and rear,front,rearrear (4 34 O.L.—maroon) .............. 3697428 A.R. .25front brake,
rear brake ......................... 1416653 4 .30
adjusting screw, front and rear,front,
rear (3 23/32 O.L.—maroon) ............. 1416760 A.R. .30
front brake, secondary (yellow)....... 5456714 2 .40
rear brake, primary and secondary,front brake, primary (pink)......... 5456715 A.R. .40
C-19675.026Chevrolet Motor Division
General Motors Corporation 831
57-59 Ser. 3Aw/4/WD,,,, , pull back, front58-59 TON w/P/Trac ............... pull back, rear (Bendix 31629) (blue),, 231586 A.R. .3057-59 Ser. 3A w,/4/WD,58-59 'z TON w P/Trac ................ shoe adj. screw.................... 514277 1 .2057-59 Ser. 3E, 3G w/4/WD,60-63 Ser. 10-20 (4/WD) ............... adjusting screw front (Bendix 29716).. 497832 2 .4160-63 Ser. 10 (/WD) ................... adjusting screw (Bendix 305546) ..... 2408323 2 .3060-63 Ser. 10 (4/WD) .................. pull back, front (Bendix 305545)...... 2408324 2 .3560-63 Ser. 30 ......................... front and rear,64-67 Ser. 30 (exc. 11,000 lb. axle) ..... rear (5 2%2 O.L.—orange) ............ 3767138 4 .3063-68 PASS., CORVETTE (exc. metallic
linings, Disc Brakes, TAXI, H.D.),64-66 Ser. 10 ......................... pull back, front secondary,65-67 Ser. 20-30 (exc. D-D, 4/WD),67-68 Ser. 10, G-10 ................... (32'/32 O.L.—black)................... 3820277 2 .3063-68 PASS. (exc. metallic lings TAXI,
H.D.),64-67 Ser. 10, G-20,65 CORVETTE (exc. Disc. Brakes) .. pull back, rear secondary (3 25/,, O.L.—65-67 Ser. 20 (exc. D-D, 4/WD) ......... gray) ........................... 3820163 2 .3063-64 PASS., CORVETTE w/metallic
linings,65-68 TAXI,65-68 PASS. w/metallic brakes,63-68 POLICE ....................... pull back, front and rear primary (red).. 3820179 A.R. .6063-66 PASS., CORVETTE w/metallic
linings,63-67 POLICE,65-67 TAXI .......................... pull back, rear secondary (red) ....... 3820180 2 .6063-64 PASS., CORVETTE w/metallic
linings,65-68 TAXI (exc. H.D. Brake),65-68 PASS. w/metallic linings......... pull back, front secondary65-68 POLICE (exc. H.D. brakes)....... (325/32 O.L.—green) .................. 3820284 2 .6063-64 PASS., CORVETTE (exc. Sp./Per.) adjusting screw, front and rear64-68 Ser. 10 ........................ (2 31/32 O.L.—green),64-67 Ser. 20 (exc. D-D, 4/WD),67-68 G-20,67-68 Ser. 10 (4/WD),68 Ser. 20-30 (exc. 4/WD) ........... front,65-68 PASS.,65-66 CORVETTE (exc. Disc. Brakes) .. front and rear ...................... 3887347 A.R. .2063 SPT. CPE. (RPO Zil)........... adjusting screw, rear ............... 5464063 2 1.2063-64 CORVETTE w/Sp./Per........... pull back, front and rear primary...... 5462106 A.R. .5063-64 CORVETTE w/Sp./Per........... pull back, front and rear secondary ... 5462107 A.R. .3563-64 CORVETTE w/Sp./Per........... adjusting screw, front and rear....... 5462023 A.R. .5064-68 Ser. 20 (D-D, 4/WD) .............. adjusting screw, front and rear,65-68 Ser. 30 (D-D) ................... adjusting screw, rear ............... 3843194 A.R. .3064-68 Ser. 20 (D-D, 4/WD, leaf type
springs) ...................... pull back, front and rear secondary,65-68 Ser. 30 (D-D) ................... pull back, rear .................... 3843201 A.R. .3064-68 G-10 ........................... adjusting screw, front and rear ...... 5462500 4 .2964-68 G-10 ........................... pull back, front and rear primary ...... 5462970 A.R. .3164-68 G-10 (exc. metallic linings)....... pull back, front and rear secondary ... 5462958 2 .3265-67 Ser. 30 (exc. 11,000 lb. axle) ..... pull back, rear secondary ............ 3856843 2 .3065-67 S er. 30 ........................ rear brake shoe adjusting screw ...... 3856850 2 .3065-67 CORVETTE .................... parking brake, pull back............. 5465943 4 .3865-67 CORVETTE .................... parking brake adjusting screw ........ 5465944 2 .2367 Ser. 30 w/11000 lb. axle,68 Ser. 30 w/11,000 lb. axle (exc. D-D) adjusting screw friction rear ......... 3887372 2 .1567 Ser. 30 w/11,000 lb. axle......... rear, pull back ..................... 3873449 4 .5067 Ser. 30 w/ 11,000 lb. axle ......... front, pull back secondary ........... 3873508 2 .2551-55 UTILITY (1st Ser.) .............. PIN, rear shoe pull back spring ........ 3694545 A.R. .2051-58 PASS., '/ TON (exc. metallic
linings),53-62 CORVETTE (exc. H.D. Brake/Susp.
metallic linings) .............. KIT, front and rear,59 PASS., '/2 TON .................. front.............................. 3740014 ® 1 1.41
®NOTE: Consists of 4 each Pull Back Spring, Hold Down Pin and Spring; 8 Spring Cups and2 Adj. Hole Covers.
5.026 %-1967Chevrolet Motor Division
832 General Motors Corporation
592418 A.R. .15
475508 A.R. .05
57-58 PASS. w/metallic linings (exc.cerametallix),
61-62 PASS. w/metallic linings,59-62 CORVETTE w/metallic linings
(exc. cerametallix, H.D. Brake/Susp.) ............... KIT, front and rear brake spring........ 3767670* A.R. 3.1659 PASS., /TON (exc. '/2 TONw/P/Trac.) ................... KIT, rear repair parts
60-62 PASS., '/TON,62-63 Ser. 30,63 Ser. 10 (exc. 4/WD),63 Ser. 20 (exc. 4/WD, D-D),64 Ser. 30 (exc. D-D) ............... front repair parts ................... 3767668* 1 1.50
*NOTE: Consists of 4 each: Pull Back Springs, Hold Down Springs; 8 Hold Down Spring Cups;12 Hold Down Pins and 2 Shoe Guide Plates.
5.028 SPRING, Brake Shoe Lever
38-50 UTILITY46-52 1 TON, D-D ....................38-52 HE, JE, KE, KF, AM, AN, BM,
DR, ER, FR, GR, HR, JR, KR..51-52 UTILITY, ,,38-42 PASS., COMM. (exc. H.D., 1 TON),46-50 PASS., ' TON ..................38-52 HE, JE, KE, KF, AM, AN, BM, BN,
DR, ER, FR, GR, HR, JR, KR ..
front and rear,
rear,front (
13/2 I.D. x 5
/ long) .............
front and rear,
front (i ' 2 long) ....................
477440 A.R. .10
592417 A.R. .10
5.030 PIN —LOCK, Brake Shoe Friction Spring
38-50 UTILITY ....................... front and rear,39-42 JE, KE, AM, BM,38-52 1 TON ......................... rear,51-52 UTILITY ....................... front (
3/8 x 1y,6).....................
38-42 PASS., COMM. (exc. H.D., 1 TON),46-50 PASS., Y TON .................. front and rear,38-52 HE, JE, KE, KF, AM, AN, BM, BN,
DR, ER, FR, GR, HR, JR, KR „ front ( 3/8 x 1/64).....................
38-50 ALL... , LOCK, front and rear,51-52 COMM., UTIL (exc. '/ TON) , , , , , , front,51-52 3
/4 , 1 TON ..................... rear ( / 6 O.D.) .....................
5.034 PIN, Brake Shoe Link
477443 A.R. .15
38-42 PASS., COMM. (exc. H.D., 1 TON),46-50 PASS., '/ TON ..................38-52 HE, JE, KE, KF, AM, AN, BM, BN,
DR, ER, FR, GR, HR, JR, KR..38-50 UTILITY,,,,,,,,,,,,,, ,39-42 JE, KE, AM, BM,38-52 1 TON .........................51-52 UTILITY,,,,,,,,,,,,,46-52 1 TON, D-D ....... ,46-52 3
/4 TON.........................
5.041 PIN, Brake Shoe
65-67 CORVETTE (exc. H.D.)..........65-68 CORVETTE w/H.D. Brakes .......67-68 PASS. w/Disc Brakes,68 POLICE .......................
front and rear,
front .............................. 592419 A.R. .25front and rear,
rear,front .............................. 477444 A.R. .35front,rear .............................. 3680887 4 .30
front and rear retaining .............. 5467815 A.R. .61front brake shoe retainer............ 187319 2 (8.938)
front brake shoe retainer ........... 5456841 1 .45
C-1967Chevrolet Motor Division 5.026-5.041General Motors Corporation 833
5.043 PIN UNIT — WASHER—NUT—BOLT UNIT — SPRING—RETAINER—LOCK,Brake Shoe Hold Down
38-42 PASS., COMM ................... front and rear (front only on jobs46-48 PASS., '/z , '/4 TON .............. w/14" rear brakes) ............... 3696830 A.R. .1053-59 1 TON ......................... rear,53-55 UTILITY (1st Ser.),65 G-10,67 Ser. 30 (D-D) w/SGL. SPD. rear
axle......................... front,55-59 D-D w/7.50 x 17 tires, duals, 14"
brake (2nd Ser.) (exc. 3-SPD.),60-64 Ser. 30 ......................... rear .............................. 3702978 8 .3055-59 3i„ 1 TON (2nd Ser.) (exc. 4/WD),60-65 D-D (exc. Ser. 10) ............... front,55-59 '/4 TON (2nd Ser.) (exc. D-D),55-59 D-D (2nd Ser.) (exc. 7.50 x 17
tires, duals, 14" brake),60-64 Ser. 20 (4/WD, D-D) ............ rear .............................. 3718045 8 .2056-58 PASS., CORVETTE, '/Z TON
(exc. '/ TON w/P/Trac.),59-62 CORVETTE (exc. metallic lining,
H.D. Brake/Susp.) ............. front and rear,60-62 Ser. 10-20,62 Ser. 20-30 (D-D) ................. front .............................. 3719280 8 .2057-58 PASS. w/metallic linings,53-60 CORVETTE w/metallic linings,61-62 CORVETTE w/H.D. Brake Susp.,
metalliclinings ............... front and rear...................... 3759941 8 .4757-59 Ser. 3A w/4/WD ................. front, w/spring..................... 3750342 4 .3057-59 Ser. 3E-3G w/4/WD,60-62 Ser. 20 (4/WD) .................. front,62-64 Ser. 30,65-66 Ser. 30 (w/P/Trac., H.D. r.r.
Shocks),65-66 Ser. 30 (D-D) ................... rear, w/spring ..................... 3750341 4 .3059-62 PASS. w/metallic linings,60 CORVETTE w/H.D. Brake /Susp. front and rear ...................... 3767678 A.R. .4759 '/ TON w/P/Trac ................ rear .............................. 419973 2 .6553-55 % TON (1st Ser.) ................ front and rear,53-55 1 TON (1st Ser.) ................ front,59 12 TON (exc. P/Trac.),60-62 Ser. 20 (exc. D-D, 4/WD),60-62 Ser. 10 ......................... rear,59 ',z TON (exc. 4/WD),60-63 Ser. 20-30 (exc. D-D, 4/WD) ...... front,63 Ser. 10 (exc. D-D, 4 /WD) ......... front and rear,64 Ser. 10,65 Ser. 10-20 w/leaf type springs.... rear .............................. 3845711 A.R. .8064-66 PASS. w/metallic brakes,64 CORVETTE w/metallic brakes
(exc. SPT. CPE. w/Sp./Per.),65-66 CORVETTE w/metallic brakes .... front and rear ...................... 3794197 1 .4251-58 PASS., CORVETTE, r/ TON
(exc. iz TON w/P/Trac.),59-64 PASS., CORVETTE (exc.
metallic brakes),65 CORVETTE (exc. Metallic
Brakes) ...................... front and rear,64-65 Ser. 10,64-65 Ser. 20-30 (D-D, 4/WD),67-68 (4/WD) ......................... front .............................. 3794200 8 .3763-64 CORVETTE w/Sp./Per. ......... front and rear,65 Ser. 20 (exc. D-D, 4/WD) ......... rear .............................. 3794199 A.R. .4765-67 Ser. 20 (4/WD, D-D) ............. rear,66-67 Ser. 20-30 (D-D) (exc. 11,000 lb.
axle) ........................ front.............................. 3917941 A.R. .6065-68 PASS. (exc. Disc Brakes,
Metallic Lining, TAXI,POLICE..................... front and rear ...................... 3917936 A.R. .60
65-67 CORVETTE .................... parking brake ...................... 3865804 1 .3565 Ser. 20-30 (exc. leaf type springs) . front and rear pin spring ............. 3865848 A.R. .15
5.043
©_1967Chevrolet Motor Division
834 General Motors Corporation
37022211 A.R. 1.25
3699372 2 2.10
3820272 2 1.30
3705732 A.R. 1.35
5454791 4 2.10
5.043 -5.055
38-52 UTILITY ....................... front,39-42 JE, KE, AM, BM,38-52 1 TON ......................... rear .............................46-52 1 TON, D-D .................... front,46-52 3
/4 TON ......................... rear ('/4 x1
'/64) .....................53-59 3
/4 , 1 TON,60-63 Ser. 20-30 (D-D) ................. front,53-59 '/4 TON (exc. 14 11 brake, duals on
D-D),60-63 Ser. 20 (4/WD) .................. rear (3 1/4 O.L.) .....................
tNOTE: Not used on 1955 D-D w/7.50-17, 7.00-18 tires, or 1956 D-D w/duals.53-55 UTILITY (1st Ser.) .............. front,53-59 1 TON,56-59 D-D w/14" brake or duals ........ rear ,,,,,,,,,,,,,,,,,,,,,55-62 PASS.,60-63 Ser. 10 (exc. 4/WD),63-64 PASS., CORVETTE,65 CORVETTE (exc. Disc Brake)... front ..............................55-62 PASS.,56-61 CORVETTE,60-63 Ser. 10,62 CORVETTE (exc. H.D.
Brake/Susp.) ................. rear,55-59 % TON (2nd Ser.) (exc. P/Trac.) , front and rear (2'/e O.L.) .............57-59 CORVETTE w/H.D. Brake,
P/Trac.,60-61 CORVETTE w/H.D. Brake,
(exc. PG.),62 CORVETTE w/H.D. Brake ....... front and rear........C-1967Chevrolet Motor DivisionGeneral Motors Corporation 835
67 PASS., Ser. 10 .................. front and rear,67 G-20,67 Ser. 20 (exc. 327),67 Ser. 30 (exc. 11,000 lb. axle) ..... rear,67 Ser. 20-30 (exc. D-D),68 Ser. 20 (4/WD) .................. front (21( O.L. x 1
16 4 thick) .......... 497812 A.R.59-62 PASS., CORVETTE w/metalliclinings (exc. H.D. Brake/Susp.),
63 PASS., CORVETTE ............. front and rear (21/ O.L. x'/ 4 thick).... 3764978 A.R.64-68 G-10 ........................... front and rear (2 154 4
O.L. x 4 thick).... 5460399 265-67 CORVETTE .................... parking brake shoe guide (1'/ O.L. x3/
64 thick) ........................ 5465949 2
5.055 PIN—PIN UNIT, Brake Shoe Anchor
477448 2
3680889 2
28
30.19
15
40
35
67 Ser. 30 w/11,000 lb. axle ......... w/spring ......................... . 3881496 A.R.66-67 G-10-20 ........................ front.......................... 3917940 A.R.66-67 Ser. 10 (exc. 4/WD),66 (4/WD),67 Ser. 20-30 (exc. D-D, 4/WD) ...... front,66 Ser. 20-30 (exc. D-D, 4/WD),67 G-10-20,67 Ser. 10,67 Ser. 30 (exc. D-D, 11,000 lb. axle), rear .............................. 3917938 A.R.67-68 PASS. w/Metallic Brakes,67-68 POLICE, TAXI w/H.D. Chassis,
3.31 axle ..................... front and rear...................... 3917937 A.R.67 Ser. 30 (D-D) w/11000 lb, axle .... front and rear,67 Ser. 30 157 w.B. w/11000 lb. axle . rear .............................. 3917939 A.R.51-55 UTILITY (1st Ser.) .............. WASHER, bolt, rear................... 3694533 A.R.51-55 UTILITY (1st Ser.) .............. NUT, bolt, rear ('/-24 slotted hex.) .... 3694546 A.R.66-68 G-10 ........................... NUT, front and rear anchor pin (°4-18) . 9434987 251-55 UTILITY (1st Ser.) .............. BOLT UNIT, rear .................... 3698458* A.R.
*NOTE: Consists of: 1 Bolt ( 1/-20 and 3/e -24 x 24 6 O.L.), 1 Nut ( 1/-20), and 1 L/Washer.
60-63 Ser. 10 (4/WD) .................. SPRING (Bendix 47958) ............... 2408322 465 Ser. 10 w/leaf type springs ....... SPRING, rear ........................ 5464152 267 Ser. 30 w/11,000 lb. axle ......... RETAINER, hold down pin ............ 3882712 867 Ser. 30 w/11,000 lb. axle......... LOCK, rear .......................... 3884948 A.R.
2860
.60
.60
,60.12.05
(8.915).65
.30
.23
.15
.05
5.045 PLATE, Brake Shoe Guide
51-66 ALL (exc. G-10),
3820146 2 1.30
3840650 2 1.303840699 2 1.30
3843200 A.R. 1.35
3841173 2 1.303855003 2 1.303856834 2 2.953873504 2 1.85
front and rear,
front ............................. 3841719 2 1.25rear.............................. 3767135 2 2.15
60-68 Ser. 20 (exc. 4/WD, D-D),68 Ser. 20 (D-D) ...................60-68 Ser. 30 (exc. D-D),68 Ser. 30 (D-D) ...................60-64 Ser. 30 .........................63-67 PASS., CORVETTE (exc. Disc
Brake) ....................... rear..............................64-68 Ser. 10, G-20 ................... rear,68 Ser. 30 w/11000 lb. axle (exc. D-D) trans. park brk. shoe anchor rear .....64-68 Ser. 10 (exc. 4/WD) ............. front..............................64-67 Ser. 20 (D-D, 4/WD) ............. rear,64-67 Ser. 20-30 (D-D),67-68 G-20 .......................... front.............................64-67 G- 10 ........................... front and rear (2 23/64 O.L. w / 9/ 6-18 x
3/,thds.) .........................65-68 PASS .......................... front..............................65-67 Ser. 30 (exc. 11,000 lb. axle) ..... rear ..............................67 Ser. 30 (D-D) w/11,000 lb. axle .. . front..............................51-54 PASS., '/Z TON,53-56 CORVETTE,55 '2 TON (1st Ser.),57-59 Ser. 3A w/4/WD ................. PIN UNIT, front and rear,57-62 CORVETTE (exc. H.D. brake) .... front ..............................
*NOTE: Consists of 1 each: Anchor Pin, Washer, L/Washer, and Nut.3696705* A.R. 1.65
5.056 WASHER—LOCK—NUT—CLIP—BOLT, Brake Shoe Anchor Pin
51-54 PASS., '/, TON,53-55 CORVETTE,55 '/ TON (1st Ser.) ................ front and rear,57-59 Ser. 3A w/4/WD,56-62 CORVETTE .................... front ..............................
*NOTE: Not used on rear axle on 195 -59 CORVETTE.55-64 PASS.,60-65 Ser. 10 (exc. 4/WD),64-65 CORVETTE (exc. Disc. Brake) ... front ..............................60-63 Ser. 20 (exc. 4/WD, D-D),64-68 Ser. 20 (exc. 4/WD) .............. front and rear,60-63 Ser. 30 (exc. D-D),64 Ser. 20-30 (exc. D-D, 4/WD),64-68 Ser. 10 (exc. 4/WD),64-68 Ser. 30 (exc. 11000 lb. axle) ...... front,64-68 Scr. 10, G-20,64-67 Ser. 20 (4/WD) ................. rear ..............................60-64 Ser. 30 ......................... rear ..............................65-68 PASS . ......................... front .............................38-42 HD, JD, KD, AL, BL,38-50 PASS., ',/Z TON .................. LOCK, front and rear,40-42 KE, KF, AM, AN, BM, BN,46-52 '/, TON (exc. D-D) ............... front ( i9/ 2 O.D.) ....................38-54 UTILITY,38-42 GE, HE, JE, KE, KF, AM, AN,
BM, BN,46-55 1 TON, D-D (exc. FU, GU)
(1st Ser.) ..................... LOCK, rear,38-54 COMM., UTIL.,67 Ser. 30 w/11,000 lb. axle ......... front and rear (1 34 6 O.D.) ............46-52 1 TON, D-D .................... LOCK, front,46-52 3/4 TON ......................... rear (1 14 6 O.D.).....................60-63 Ser. 20 (exc. 4/WD, D-D) ......... NUT, rear,64-66 Ser. 20 (D-D),67-68 G-20 ........................... front and rear,64-66 Ser. 30 (D-D),67 Ser. 20-30 (D-D), (exc. 11000 lb.
axle) ........................ front(%-16),65-68 Ser. 10-20 ...................... rear,68 Ser. 30 w/11000 lb. axle (exc. D-D) trans. park brk . ................... .65-67 CORVETTE .................... CLIP, parking lever pivot pin65-68 CORVETTE ................... BOLT, parking (
14-20 x 2) ........... .
3694704* A.R. .10
3846589 2 .05
3840689 2 .053767136 2 .123867279 2 .05
358829 A.R. .10
359380 A.R. .10
3680888 A.R. .10
3760300 2 .355465995 2 .155467056 2 .48
5.055-5.056
G-1967Chevrolet Motor Division
836 General Motors Corporation
384545
3838
5.075 PLATE, Brake Shoe Anchor
39-52 UTILITY w/H.D. frt. axle........ front .............................. 3650718 2 1.8038-39 F, G, H, J (exc. GE, HE, JE),40-42 PASS., KC, KD, AK, AL, BK, BL,46-50 PASS., TON .................. rear .............................. 475474 2 .8438-50 UTILITY ....................... rear, left .......................... 592411 1 3.85
5.100 SCOOP—SCOOP UNIT, Brake Air
57-62 CORVETTE w/H.D. Brake/Susp. , , left, rear ..................... 3764493 1 N.L.57-62 CORVETTE w/H.D. Brake/Susp. , , right, rear ................... . 3764494 1 N.L.63-64 CORVETTE w/H.D. Brake ....... left, front ........................ 3821849 1 11.6063-64 CORVETTE w/H.D. Brake ....... ri ht, front 3821850 1 11.6058-62 CORVETTE w/H.D. Brake/Susp... SCOOP UNIT, front ................... 3767960 1 23.55
5.103 LEVER—LEVER ASSY._PIVOT—CUP, Brake Shoe Automatic Adjusting
63-64 PASS., CORVETTE (exc.Sp. /Per.),
64-65 Ser. 10 (exc. 4/WD, leaf type sprgs. ),64-65 Ser. 20 (exc. D-D, 4/WD),65-66 PASS.,65 CORVETTE (exc. Disc. Brake),65-66 Ser. 10 (exc. leaf type springs),67-68 G-20 ........................... left, front and rear,65 Ser. 30 (exc. D-D, 4/WD),67-68 Ser. 10, (exc. 4/WD)67 PASS., (exc. 6 cyl. sta. wagon),68 PASS (exc. Disc Brakes) ......... left, front,65-68 PASS.,67 Ser. 10,67 Ser. 20 (exc. D-D, 4/WD) ..... ,
5462098 A.R... rear ,,,,,63-64 PASS., CORVETTE (exc.
Sp. /Per.),64-65 Ser. 10 (exc. 4/WD, leaf type
springs),64 Ser. 20 (exc. D-D, 4/WD),65-66 PASS., CORVETTE (exc. Disc.
Brake),65-66 Ser. 20 (exc. D-D, 4/WD),67-68 G-20 ........................... right, front and rear65-66 Ser. 30 (exc. D-D, 4/WD),67-68 PASS., (exc. Disc Brakes),67 Ser. 10 (exc. 4/WD) .............. right, front,65-68 PASS.,67 Ser. 10,67 Ser , 20 ( D D 4/WD)......... rear 5462099 A.R. .4563-64 CORVETTE w S ear .. " " " " " " " ./ p./Per........... left, front and rear .................. 5462740 1 1.2663-64 CORVETTE w/Sp./Per........... right, front and rear ................. 5462741 1 1.2664-68 Ser. 20 (D-D) .................... left, rear,64-68 Ser. 20 (4/WD) .................. left, front and rear,
45
65-68 Ser. 20-30 (D-D) (exc. 11000 lb.axle) ......................... left, front. . . . ..................... 5464009 164-68 Ser. 20 (D-D) ................... right, rear,
64-68 Ser. 20 (4/WD) .................. right, front and rear,65-68 Ser. 20-30 (D-D) (exc. 11000 lb.
axle) ......................... right,front........................ 5464010 164-6864-68
G-10 ...........................G-10
left, front and rear .................. 3823363 A.R.
65...........................
Ser. 10 (exc. leaf type springs),right, front and rear................. 3823364 A.R.
65 Ser. 10 w/leaf type springs ....... left, rear.
......... 5464917 165 Ser. 10 w/leaf type springs ....... right, rear ........................" "" 5464918 5464918 165-66 Ser. 30, ""
67 Ser. 30 (D-D) w/11000 lb. axle .... left rear,67 Ser. 30 (exc. 11000 lb. axle),68 Ser. 30 (exc. D-D),68 Ser. 30 (D-D)(exc. P./Trac.)...... left, front ........................ 3856853 1
38
55
—1967Chevrolet Motor Division 5.075-5.103General Motors Corporation 837
55
45
.45
.45.45
1.101.10
.50
.50
.95
.95
1023.23
14
63-64 CORVETTE w/Sp./Per........... right, front and rear,64-68 Ser. 10, G-20,64-67 Ser. 20 (exc. D-D, 4/WD),65 CORVETTE (exc. Disc. Brake),65-68 PASS .......................... left, front and rear65-66 Ser. 20-30 (exc. D-D, 4/WD),68 Ser. 10 (exc. D-D),68 Ser. 20 (exc. 4 /WD),68 Ser. 30 .........................63-64 PASS., CORVETTE (exc.
Sp./Per.) .....................63-64 CORVETTE w/Sp./Per..........64-68 Ser. 10, G-20,64 Ser. 20 (exc. D-D, 4/WD),65 CORVETTE (exc. Disc Brake),65-68 PASS ..........................65-67 Ser. 20-30 (exc. D-D, 4/WD),68 Ser. 10 (exc. D-D),68 Ser. 20 (exc. 4/WD),68 Ser. 30 ........................65-66 Ser. 20 w/leaf type springs .......65-66 Ser. 20 w/leaf type springs .......
left, front (5 15/ 6 O.L.) ............... 5461156 1
right, front and rear,left, front and rear,
right, front and rear,
right, front (515/b O, L.) .............. 5461157 1left, rear .......................... 5459679 1right, rear ......................... 5459680 1
65-66 Ser. 30,67 Ser. 30 (D-D) w/11000 lb. axle.... right rear,67 Ser. 30 (exc. 11,000 lb. axle),68 Ser. 30 (exc. D-D),68 Ser. 30 (D-D) (exc. P./Trac.)...... right front ......................... 3856854 166-68 Ser. 20-30 (exc. D-D, 4/WD),68 Ser. 20-30 (D-D) ................. left,front.......................... 3883393 166-68 Ser. 20-30 (exc. D-D, 4/WD),68 Ser. 20-30 (D D) ................ right, front ........................ 3883394 167 Ser. 30 w/11,000 lb. axle ......... left, rear .......................... 3873455 267 Ser. 30w/11,000lb. axle ......... right, rear ......................... 3873456 265-67 Ser. 30 (exc. 11,000 lb. axle) ..... LEVER ASSY., left, rear .............. 3856851 165-67 Ser. 30 (exc. 11,000 lb. axle) ..... LEVER ASSY., right, rear ............. 3856852 165-67 CORVETTE .................... LEVER ASSY., left, parking brake ...... 5465936 165-67 CORVETTE .................... LEVER ASSY., right, parking brake..... 5465937 167 Ser. 30 w/11,000 lb. axle ......... LEVER ASSY., left, rear .............. 3873453 267 Ser. 30w/11,000 lb. axle ......... LEVER ASSY., right, rear ............. 3873454 268 CORVETTE ................... LEVER ASSY., right parking brake ..... 5468679 168 CORVETTE ..................... LEVER ASSY., left parking brake....... 5468678 163-64 PASS., CORVETTE (exc.
Sp. /Per.),64-65 Ser. 10,64 Ser. 20 (exc. D-D, 4/WD),65 PASS., CORVETTE (exc. IMPALA,
Sp. /Per.),65 Ser. 20,65 Ser. 30 (exc. D-D),66-68 ALL,66 CORVETTE (exc. Disc. Brakes) .. PIVOT, left, front and rear,65-66 Ser. 30 (D-D) ................... left, front ......................... 3856855 163-64 PASS., CORVETTE (exc. Sp./Per.),64-65 Ser. 10,64 Ser. 20 (exc. D-D, 4/WD),65 PASS., CORVETTE (exc. IMPALA,
Sp. /Per.),65 Ser. 20,65 Ser. 30 (exc. D-D),66-68 ALL,66 CORVETTE (exc. Disc. Brake) ... PIVOT, right, front and rear,65-66 Ser. 30 (D-D) ................... right, front ........................ 3856856 164-68 G-10 ........................... PIVOT, left, front and rear ............ 5462256 164-68 G-10 ............................ PIVOT, right, front and rear........... 5462257 1
Not required in this group. Seegroup 4.651 ................... CUP. ............................... 5460577
10
5.105 LINK—PAWL, Brake Shoe Automatic Adjusting Lever
63-64 PASS., CORVETTE (exc. Sp./Per.) left, front and rear,
64
645555
5.103-5.105
©-1967Chevrolet Motor Division
838 General Motors Corporation
64-67 Ser. 20 (D-D, 4/WD) ............. left, front and rear,65-67 Ser. 30 (D-D) (exc. 11000 lb.
axle),6864-67
Ser. 20 (4/WD) ..................Ser. 20 (D-D, 4/WD)
left, front ......................... 3843209 1 .6565-67
.............Ser. 30 (D-D) (Exc. 11000 lb. axle),
right, front and rear,
68 Ser. 20 (4/WD) .................. right, fronfront.............. ......... 3843210 13843210 .65G-10 .......................... right, front and rear....... .......... 5462527 1 .5564-6865-67
G-10 .........................Ser. 30 (exc. 11, 000 lb. axle) .... ,
left, front and rear .................left, rear
5462526 1 .5565-67 Ser. 30 (exc. 11,000 lb. axle) .....
..........................right, rear
3856857 1 .90
67 Ser. 30 (D-D) w/11,000 lb. axle ............................
left, front3856858 1 .90
67 Ser. 30 (D-D) w/11,000 lb. axle ............................
right, front3873517 1 .25
67 Ser. 30 w/11,000 lb. axle................................. 3873518 1 .25
65-66 Ser. 20 w/leaf type springs .......rear ..............................
PAWL, left3873459 4 .10
65-66 Ser. 20 w/leaf type springs ....................... .
PAWL, right5459682 1 .23
......................... 5459683 1 .23
5.107 SPRING, Brake Shoe Automatic Adjusting Lever
63-68 PASS. (exc. Disc Brake, metalliclinings, TAXI POLICE),
63-65 CORVETTE (exc. metallic linings,Disc Brake),
64-68 G-10-20,64 Ser. 10 (4/WD),64 Ser. 20 (D-D),65-68 Ser. 10 (exc. leaf type springs),65-68 Ser. 20-30 ...................... front and rear,64 Ser. 20 (4/WD) .................. front,64 Ser. 10exc. 4/WD) .......( ) ....... rear65 Ser. 10 w/leaf type springs ........
................... ...........rear, lever retaine
5461984 A.R. .155461141 263-64 PASS., CORVETTE (exc. " """' .26
metallic linings),64 Ser. 10-20,65-68 PASS. (exc. metallic linings, Disc
Brake, TAXI, H.D. chassis),65-66 CORVETTE (exc. metallic linings),65-66 Ser. 10-20 (4/WD) ............... front and rear override (18 coils_2%65-66 Ser. 20-30 (exc. 4/WD) ........... free length),64 Ser. 20 (exc. D-D),67-68 Ser. 10 thru 3067-68
..................Ser. 20-30 (D-D 4/WD),
rear,
67-68 Ser. 10 ......................... front,67-6863-64
G-20 ............. ...PASS., CORVETTE w/metallic
front and rear...................... 5461145 A.R. .36linings,
65-68 PASS, w/metallic brakes,65-68 TAXI, POLICE (exc. metallic
63-64brakes) ......................
PASS., CORVETTE w/metallicfront and rear return (1 3/
64 O.L.—blue).. 5462097 A.R. .15
linings,65-68 PASS. w/metallic brakes,65-68 TAXI, POLICE (exc. metallic front and rear override (2 2
/2 O.L.-
63-64brakes)
w... .
CORVETTE S/ p./Per.,,,,,,,,,,green)............
"""""""'front and rear retur 5462096 A.R. .5564-68 G-10 (exc. metallic linings) .......
...............front and rear override (24 1
/2 coils-35462742 1 .30
66-68 Ser. 20-30 (exc. D-D, 4/WD),freelength) ...................... 5462264 2 .36
68 Ser. 20-30 (D-D) ................. front, override...................... 3883392 2 .15
C-1967Chevrolet Motor Division 5,105-5.107General Motors Corporation 839
2 80
9 .35
2 .351 .591 .59
1 .771 .77
1 1.10
1 1.10
1 .90
1 .90
2 .40
5.110 SCREW—SCREW ASSY.—CAMSHAFT — WASHER—SPRING, Broke Shoe Adiustin
51-62 PASS., '/ TON,53-62 CORVETTE,53-63 3
/4 TON (exc. D-D w/7.50-17 tires,duals, 14" brake) .............. front and rear,
53-55 COMM. (1st Ser.),55-59 Ser. 3 (2nd Ser.),60-62 Ser. 30,63 Ser. 10 (4/WD),63 Ser. 20-30 (exc. 4/WD),64 Ser. 30 (D-D) ................... front,63 Ser. 20 ......................... rear(Bendix 29491) ................. 496351 A.R.51-55 UTILITY (1st Ser.) .............. rear,left.......................... 3694517 251-55 UTILITY (1st Ser.) .............. rear,right...................... 3694518 253-55 UTILITY (1st Ser.) .............. front,53-59 1 TON,55 D-D w/7.50-17, 7.00-18 tires
(2nd Ser.),56-59 D-D w/14" brake or duals,60-64 Ser. 30 ......................... rear(2'/4 O.L.) ..................... 141675363-64 PASS., CORVETTE (exc. Sp./Per.),64-66 Ser. 10,64-68 Ser. 20 (exc. D-D, 4/WD),65-68 PASS.,67-68 G-20 ............................ left, front and rear,65-68 Ser. 20-30 (exc. D-D, 4/WD),67-68 Ser. 10,67-68 PASS. (exc. 6 cyl. sta. wagon,65 CORVETTE (exc. Disc. Brake) ... left, rear .......................... 382015763-64 PASS., CORVETTE (exc.
Sp. /Per.),64-66 Ser. 10,64-68 Ser. 20 (exc. D-D, 4/WD),65-68 PASS.,67-68 G-20 ........................... right, front and rear,65-68 Ser. 20-30 (exc. D-D, 4/WD),67-68 Ser. 10,67-68 PASS. (exc. 6 cyl. sta. wagon,
discbrakes) .................. right, front,65 CORVETTE (exc. Disc. Brake) ... right, rear ......................... 382015864-67 Ser. 20 (D-D, 4/WD) .............. left, front and rear.................. 546284764-67 Ser. 20 (D-D, 4/WD) ............. right, front and rear................ 546284864-68 G-10 ........................... left, front and rear .................. 546720364-68 G-10 ........................... right, front and rear................. 546720265-66 Ser. 20 w/leaf type springs ....... left, rear .......................... 545966965-66 Ser. 20 w/leaf type springs ....... right, rear ......................... 545967065-66 Ser. 30 (exc. D-D),65-66 Ser. 30 (D-D) (exc. SGL. SPD.
axle) ........................ w/nut, left rear adjusting pivot,67 Ser. 30 (D-D) w/11,000 lb. axle ... left, front ......................... 385684565-67 Ser. 30 w/11,000 lb. axle......... w/nut, right rear adjusting pivot,67 Ser. 30 (D-D) w/11,000 lb. axle.., right, front ........................ 385684665-67 Ser. 30 exc. 11,000 lb. axle,68 Ser. 30 (exc. D-D),68 Ser. 30 (D-D) (exc. P Trac.) ...... left rear adjusting,67 Ser. 30 (D-D) w/11,000 lb. axle ... left, front ......................... 385684765-67 Ser. 30 (exc. 11,000 lb. axle),68 Ser. 30 (exc. D-D),68 Ser. 30 (D-D) (exc. P/Trac.) ...... right rear adjusting,67 Ser. 30 (D-D) w/11,000 lb. axle ... right, front ........................ 385684867 Ser. 30 w/11,000 lb. axle......... left, rear ('/ a-12 x 1 5/) (stamped L)
(R.H.thd.) ...................... 387345167 Ser. 30 w/11,000 lb. axle......... right, rear (°/ 6 -12 x 1 5
/8 ) (stamped R)(L.H. thd.) ...................... 3873452
62 PASS., CORVETTE,62 Ser. 10 ......................... SCREW ASSY., w/nut, front and rear63 Ser. 10 (exc. 4/WD) .............. (13/33 I.D.) ......................... 3820200 A.R.
2
644040
.40
1.18
5.110 1)-1967Chevrolet Motor Division
840 General Motors Corporation
SCREW ASSY., w/nut, left front and rear,left, rear,
left, front ......................... 3820155 2 95
SCREW ASSY., w/nut, right frt. and rr.,right, rear,
right, front ........................SCREW ASSY., w/nut, left front and rearSCREW ASSY., w/nut, right front and rr.SCREW ASSY., w/nut, front left,
3820156 2 .955462743 2 2.785462744 2 2.78
rear left w/nut ..................... 3842987 1 .90SCREW ASSY., w/nut, front right,
rearright w/nut ....................SCREW ASSY., w/nut, left front and rear,
left, rear ..........................SCREW ASSY., w/nut, right front and rr.,
right, rear .........................SCREW ASSY., w/nut, park brake
adjusting pivot .....................SCREW ASSY., w/nut and pivot, left ...SCREW ASSY., w/nut and pivot, right ..CAMSHAFT, front (Bendix 49348) ......CAMSHAFT, rear .....................WASHER, front and rear adj. screw
( Y4 I.D. x '/ O.D.) .................. 3820201 4 .05WASHER, rear adjusting screw socket... 5456106 2 .20
WASHER, frt. and rear adj. screw,front adjusting screw,rear .............................. 5462496 2 .15
WASHER, front and rear adj. screw,front adjusting screw ............... 5459672 2 .16
WASHER, rear adjusting screw socket,front .............................. 3856849 2 .05
SPRING, adjusting screw friction rear... 3887372 (5.026)
63-64 PASS., CORVETTE (exc. Sp./Per.),64-67 Ser. 20 (exc. D-D, 4/WD) .........65-68 PASS., CORVETTE .............65-67 Ser. 20-30 (exc. D-D, 4/WD),67-68 PASS. (exc. disc brakes),67-68 G-20 ...........................63-64 PASS., CORVETTE (exc.
Sp. /Per.),64-67 Ser. 20 (exc. D-D, 4/WD) .........65-68 PASS., CORVETTE .............65-67 Ser. 20-30 (exc. D-D, 4/WD),67-68 PASS. (exc. disc brakes),67-68 G-20 ...........................63-64 CORVETTE w/Sp./Per.......... .63-64 CORVETTE w/Sp./Per...........64-67 Ser. 10 (exc. 4/WD) ..............65-68 Ser. 10,67-68 G-20 ...........................64-67 Ser. 10 (exc. 4/WD) ..............65-68 Ser. 10,67-68 G-20 ..........................64-65 G-10 ...........................67 G-10 ...........................64-65 G-10 ...........................67 G-10 ...........................65-67 CORVETTE w/disc brakes .......
65-68 G-10 ..........................65-68 G-10 ..........................60-63 Ser. 10 (4/WD) ..................67 Ser. 30 w/11,000 lb. axle .........63-64 PASS., CO
RVETTE(exc. Sp./Per.),64 Ser. 10 . .......................64 Ser. 20 (exc. D-D, 4/WD) .........65-66 Ser. 20 w/leaf type springs .......64-68 G-10-20,65-68 PASS., Ser. 10,65-68 Ser. 20 (exc. D-D,4/WD)..........65-68 Ser. 30 (exc. D-D) ...............65 CORVETTE (exc. Disc Brake)...64-67 Ser. 20 (D-D, 4/WD),65-67 Ser. 30 (D-D) (exc. 11,000 lb. axle)68 Ser. 20 (4/WD) ..................65-67 Ser. 30 (exc. 11,000 lb. axle),68 Ser. 30 (exc. D-D),68 Ser. 30 (D-D) (exc. P. /Trac.) .....67 Ser. 30 w/11,000 lb. axle .........67 Ser. 30 w/11,000 lb. axle .........
3842988 1 .90
5462961 2 .95
5462962 2 .95
5467297 2 .953882741 1 .953 882 74 2 1 .952408333 2 .553873458 2 .20
5.111 SO C K ET— NUT—SPRING, Broke Shoo Adjusting Screw
51-62 PASS. (1st design),51-52 '/ TON,53-62 CORVETTE .................... front and rear,53-55 COMM. (1st Ser.),55-59 '/, '/a TON (2nd Ser.) (exc. 14',
brake, P/Trac.),60 Ser. 10-20 (exc. D-D),61-62 Ser. 10-20-30 (1st design),63 Ser. 20 ......................... rear,54-55 COMM. (1st Ser.),55-59 Ser. 3 (2nd Ser.),60-62 Ser. 10 (1st design),60-62 Ser. 20-30 (exc. 4/WD),63 Ser. 20-30 (exc. 4/WD, D-D),64 Ser. 30 (exc. D-D) ............... front ( 15/ 2 I.D. x 1 O. L.)............. 3768027* A.R. .2453-59 1 TON,60-67 Ser. 30 (w/11000 lb. axle),68 Ser. 30 ......................... rear,53-55 UTILITY (1st Ser.),67 Ser. 30 (D-D) w/11,000 lb. axle front,56-59 D-D w/14" brake or duals ........ rear ( 14 I.D. x 1''/31 O.L. ) ............ 3697400 A.R. .30©-1967Chevrolet Motor Division 5.110-5.111General Motors Corporation 841
57-63 Ser. 20 (4/WD),63 PASS. (409) (RPO Z11) .......... front ( 1 3/32 O.L.) ....................63-64 CORVETTE w/Sp./Per........... front and rear .....................62 Ser. 10 (2nd design),62-63 PASS., CORVETTE (exc. Sp./Per.),63 Ser. 10 (exc. 4/WD) ............. front and rear,63 Ser. 10 (4/WD) .................. rear,64 PASS., CORVETTE (exc. Sp./Per.),64 Ser. 10,64-66 Ser. 20 (exc. D-D, 4/WD),65 CORVETTE (exc. Disc Brake),65-68 PASS . ......................... front and rear,64-67 Ser. 30 (exc. D-D),65-66 Ser. 20 (exc. D-D, 4/WD),67-68 G-2 0,68 Ser. 20-30 (exc. 4/WD)........... front ..............................64 Ser. 10 ......................... front,65-68 Ser. 10, G-20 (exc. leaf type
springs) ...................... front and rear ......................65-66 Ser. 10 w/leaf type springs....... rear ..............................65-66 Ser. 20 w/leaf type springs ....... rear ..............................64-66 Ser. 20 (D-D, 4/WD) ............. rear,64-67 Ser. 20-30 (D-D, 4/WD),68 Ser. 20 (4/WD) .................. front ..............................64-66 G-10 ........................... front and rear,67 Ser. 10 (exc. 4/WD),67 Ser. 20-30 (exc. 4/WD, D-D),68 Ser. 10 (exc D-D, 4/WD),68 Ser. 20-30 (D-D) ................. front,67-68 G-10.67-68 Ser. 10,67 G-20 ........................... rear ..............................65-68 G-10 .. ....................... front ..............................51-52 PASS., Y TON,53-62 PASS., CORVETTE (1st design) .. NUT, pivot, front and rear,53-55 COMM. (1st Ser.),55-62 '.%2 , '/, TON (2nd Ser.) (1st design)
(exc. 14" brake) ............... pivot rear,63 Ser. 20,63 Ser. 30 (exc. D-D) ............... rear shoe adjusting,54-55 COMM. (1st Ser.),55-59 Ser. 3 (2nd Ser.),60-62 Ser. 10 (1st design),60-63 Ser. 20-30,64 Ser. 30 (exc. D-D) ............... pivot front .........................
(NOTE: Use 3820200 SCREW ASSY. for 2nd design.53-59 1 TON,56-59 D-D, w/14" brake or duals,65 Ser. 30,67 Ser. 30 (exc. 11,000 lb. axle),67 Ser. 30 (D-D) w/11,000 lb. axle,68 Ser. 30 (exc. D-D),68 Ser. 30 (D-D) (exc. P/Trac.) ...... NUT, pivot, rear,53-55 UTILITY (1st Ser.) .............. pivot, front ........................60-63 Ser. 10 (4/WD) .................. NUT, front camshaft ( 3/- 24) (Bendix
49349) ............................63 PASS.,63-64 CORVETTE (exc. Sp./Per.),64-68 PASS.,65 CORVETTE (exc. Disc Brake) .... NUT, right, front and rear64-67 Ser. 20 (exc. D-D, 4/WD) ......... right, rear,65-68 Ser. 20-30 (exc. D-D, 4/WD),67-68 G-20,68 Ser. 20-30 (D-D) ................63-68 PASS . .........................63-64 CORVETTE (exc. Sp/H/Per.),65 CORVETTE (exc. Disc Brake)..64-67 Ser. 20 (exc. D-D, 4/WD) .........64-67 Ser. 30 (exc. D-D),65-68 Ser. 20 (exc. D-D, 4/WD),67-68 G-20,68 Ser. 20-30 (D-D) .................
right, front ........................ 3820166 A.R. .35NUT, left, front and rear,
front and rear,left, rear,
left, front ......................... 3817346 A.R. 35
509209 2 .425462015 A.R. 1.27
3828808 A.R. .25
3842985 1 .255462140 2 .525459693• 2 .43
3844097 2 .25
5462946 2 .473882740 2 .40
3694702*tA.R. .35
3698655 2 .40
2408334 2 .15
5.111
c_ 1967Chevrolet Motor Division
842 General Motors Corporation
64-68 Ser. 10, G-20 (exc. leaf typesprings) ...................... NUT, left, front and rear .............. 3842983 1 .3564-68 Ser. 10, G-20 (exc. leaf typesprings) ...................... NUT, right, front and rear ............. 3842984 1 .3565-67 Ser. 30 (exc. 11,000 lb. axle),
68 Ser. 30 (exc. D-D),68 Ser. 30 (D-D) (exc. P./Trac,) ..... NUT, right rear screw pivot,67 Ser. 30 w/11,000 lb. axle ......... right, front ........................ 3856844 1 .4065-66 Ser. 10 w/leaf type springs ....... NUT, pivot, rear ..................... 5459322 1 .6765 Ser. 10 w/leaf type springs ....... NUT, rear ...... .................... 509235 1 .7065-66 Ser. 20 w/leaf type springs ....... NUT, pivot, left rear .................. 5459691• 1 .7165-66 Ser. 20 w/leaf type springs ....... NUT, pivot, right rear ................ 5459692• 1 .7164-68 Ser. 20 (D-D, 4/WD) ............. NUT, left, front and rear.64 Ser. 30 (D-D) ................... left and right, front,65-67 Ser. 30 (D-D) (exc. 11,000 lb. axle) left, front ......................... 3844095 1 .3564-68 Ser. 20 (D-D, 4/WD) ............. NUT, right, front and rear,65-67 Ser. 30 (D-D) (exc. 11000 lb. axle), right, front ........................ 3844096 1 .3564-65 G-10,
67 G-10 ........................... NUT, pivot, left front and rear ......... 5462947 1 1.2064-65 G-10,
67 G-10 ........................... NUT, pivot, right front and rear ........ 5462948 1 .3565-68 G-10 ........................... NUT, pivot, left front ................. 3882743 1 .4065-68 G-10 ........................... NUT, pivot, right front ................ 3882744 1 .4065-67 CORVETTE .................... NUT, parking brake ................... 5465948 2 .4851-55 UTILITY (1st Ser.) .............. SPRING, lock, rear ................... 3694524 4 .10
*NOTE: Not used on 1955-57 D-D w/7.50-17 or 7.00-18 tires, or 1956-58 D-D w/duals.
5.117 COVER, Brake Adjusting Hole
38-63 ALL, CORVETTE .............. (11/4 x 9 / 6 —rubber) .................. 1455658 A.R. .1038-50 UTILITY ....................... rear flange plate ................... 477464 2 .20
5.149 LEVER—LEVER ASSY., Pa rking Brake Sh oe
38-39 H, J (exc. HE, JE),40-42 PASS., KC, KD, AK, AL, BK, BL,46-50 PASS., '/ TON .................. right (8 O.L.) ...................... 475478 1 .8938-52 1 TON, JE, KE, AM, BM ......... left (9 3/4 O.L.) ...................... 596973 1 .6551-58 PASS., CORVETTE, 1/2
TON (exc.^z TON w/P/Trac.),
59 CORVETTE,60-62 Ser. 20 w/3-SPD. (exc. 4/WD, D-D),63 Ser. 20 (exc. 3-SPD, H.D.-4-SPD.,
4/WD, D-D) ................... left(775/6O.L.)..................... 3693603 1 .5651-58 PASS., CORVETTE, z TON (exc,
'/2 TON w/P/Trac.),59 CORVETTE,60-62 Ser. 20 w/3-SPD. (exc. 4/WD, D-D),63 Ser. 20 (exc. 3-SPD. H.D,-4-SPD.,
4/WD, D-D) ................... right(715/b O.L.) ................... 3693604 1 .5653-59 '/4 TON w/sgl. whl. (exc. Prop. Brk.),60-63 Ser. 20 (4/WD),60-62 Ser. 20 (D-D) w/3-SPD.,63 Ser. 20 D-D (exc. 3-SPD. H.D.,
4-SPD.) ...................... left(8','i O.L.) ...................... 3697449 1 .9553-59 '/a TON w/sgl. wheel (exc. Prop.Brake),
60-62 Ser. 20 (4/WD),60-62 Ser. 20 (D-D) w/3-SPD.,63 Ser. 20 D-D (exc. 3-SPD. H,D.,
4-SPD.) ...................... right(8', O.L.) ...................... 3697450 1 .9553-55 1 TON (1st Ser.),58-59 Ser. 3G w/4/WD ................. left (10'/4 O.L.)..................... 3697391 1 1.1053-55 1 TON (1st Ser.),58-59 Ser. 3G w/4/WD ................. right (10'a O.L.) .................... 3697392 1 1.1058-59 'Z TON w/P/Trac ................ left (stamped 307653) ............... 2367014 1 1.6058-59 '2 TON w/P/Trac ................ right (stamped 307654) .............. 2367013 1 1.60
C-1967Chevrolet Motor Division 5.111-5.149General Motors Corporation 843
1 .70
1 .95
1 .951 1.301 1.301 1.051 1.031 .601 .60
1 .55
1 .55
2 .50
2 .502 .911 1.801 1.802 .47
1 .55
1 .552 .211 .20
57-68 PASS.,58-67 Ser. 10,58-65 CORVETTE,64-67 Ser. 20 (exc. D-D, 4/WD),67 G-20 ........................... left ............................... 388637159 PASS., 'zz TON (exc. TON
w /P /Trac.),60-63 PASS., CORVETTE, 12 TON,64-67 PASS., CORVETTE,65 CORVETTE (exc. Disc Brake) .... right .............................. 385503864-66 G-10 ........................... left .............................. 546294264-67 G-10 ........................... right ............................. 546476165 CORVETTE,64-67 Ser. 10, G-20,63-68 PASS.,65-67 Ser. 20 (exc. D-D, 4/WD)......... right .............................. 388637264 Ser. 20 (4/WD),64 Ser. 20 (D-D) (exc. 3-SPD. H.D.,
4-SPD.) ...................... LEVER ASSY., left ................... 384361364 Ser. 20 (4/WD),64 Ser. 20 (D-D) (exc. 3-SPD. H.D.,
4-SPD.) ...................... LEVER ASSY., right.................. 384361465 Ser. 10 w %leaf type springs ....... LEVER ASSY., left ................... 546267465 Ser. 10 ;-/leaf type springs ....... LEVER ASSY., right .................. 546267565-66 Ser. 20 w/leaf type springs ....... LEVER ASSY., left ................... 546400765-66 Ser. 20 w/leaf type springs....... LEVER ASSY., right .................. 546400867 Ser. 30 (exc, 11000 lb. axle) ...... LEVER ASSY., left ................... 389805767 Ser. 30 (exc. 11000 lb, axle) ...... LEVER ASSY., right .................. 3898058
5.150 EXTE NSION-STRUT, Parking Brake Shoe Lever
38-39 PASS., COMM. (exc. HE, JE),40-42 PASS., KC, KD, AK, AL, BK, BL,46-50 PASS., 'Z TON .................. left (7 14 6 O.L.) ..................... 47548138-52 1 TON, JE, KE, AM, BM ......... left (7"4 O,L.) .................... 59723938-52 1 TON, JE, KE, AM, BM ......... right (7"%1,, O.L.) ................... 59724046-52 3/4 TON ......................... left (7 4, O.L.) .................... 368095746-52 3/4 TON ......................... right (7"/, O.L.) ................... 368095853-55 '/4 , 1 TON (1st Ser.),55-57 3/, TON w/sgl. wheel (2nd Ser.) (exc.
Prop. Brake),60-62 Ser. 20 (D-D) w/3-SPD. (exc. H.D.),60-66 Ser. 20 (4/WD),63-65 Ser. 20 D-D (exc. 3-SPD. H.D.,
4-SPD.) ..................... (73/4 O.L.) ......................... 369739451-62 PASS., CORVETTE, ';4 TON (exc.
TON w/P. Trac.),63-64 PASS., CORVETTE,63 Ser. 10 (4/WD) (1st Ser.),65-68 PASS. (exc. H.D. chassis, taxi),
1 .70
1 .701 .601 .60
1 1.261 1.501 1.501 1.501 1.50
2 1.00
65 CORVETTE (exc. Disc Brake).... STRUT ............................. 3825500 A.R. .5058-59 '2 TON w/P/Trac ................ STRUT (stamped 303397).............. 2346854 2 .8760-67 Ser. 20 (exc. 3-SPD. H.D., 4-SPD.,
D-D, 4/WD, leaf type springs)... STRUT, left ......................... 376020960-67 Ser. 20 (exc. 3-SPD. H.D., 4-SPD.,
D-D, 4/WD, leaf type springs). STRUT, right ........................ 376021063 Ser. 10 (exc. 4/WD),63 Ser. 10 (4/WD) (2nd Ser.) ......... STRUT ............................. 381421964 Ser. 10 (4/WD) (2nd Ser.),65-67 Ser. 10, G-20 (exc. leaf
type springs) ................. STRUT ............................. 3842980
65 Ser. 10 w/leaf type springs ....... STRUT ............................. 545697S65-66 Ser. 20 w!leaf type springs ....... STRUT, left ......................... 545380265-66 Ser. 20 w'leaf type springs ....... STRUT, left ......................... 545380364-67 TAXI, POLICE ................. STRUT ............................. 384976864-65 G-10 w/3.73, 4.11 ratio, 2900 lb.
axle......................... STRUT,left......................... 385385164-65 G-10 w/3.73, 4.11 ratio, 2900 lb.
axle......................... STRUT,right........................ 385385264-66 G-10 ........................... STRUT 546294465-67 CORVETTE .................... STRUT, left ......................... 5465940
5.149-5.150
x_1967Chevrolet Motor Division
844 General Motors Corporation
65-67 CORVETTE , STRUT, left6 7, , , ,
Ser. 30 (exc. 11000 lb. axle),. 5465941 1 .20
67 Ser. 20 (D-D, 4/WD) ............. STRUT, lever68 Ser. 30 w /11,00 lb. axle
...... . 3898059 2 1.00
(exc. D-D) .................... STRUT, trans........................ 3920778 1 .55
5.151 SPRING, Parking Brake Shoe Lever
38-39 PASS., COMM. (exc. HE, JE),40-42 PASS., KC, KD, AK, AL, BK, BL,46-50 PASS., '2 TON .................. extension ( 15/ 2 I.D. x l/ O.L.)....... 476104 2 .1038-52 1 TON, JE, KE, AM, BM ......... extension ( 19/ 2 I.D. x 1'/ 6 O.L,) , • , • , , 597241 2
0.15
51-52',^a TON .........................PASS., '/ TON,
extension ( 17 /32
I. D. x 1"/z O.L.) ..... 3680956 2 .2053-55 COMM. w/sgl. wheel (1st Ser.)
(exc. Prop. Brake),
53-66 CORVETTE (exc. Disc Brakes),
53-68 PASS.,55-59 Ser. 3 w/sgl. wheel (2nd Ser.) (exc.
Prop. Brake, '/ TON w /P/Trac.),58-59 Ser. 3G w/4/WD,60-63 Ser. 10,60-62 Ser. 20 w/3-SPD. (exc. H.D., 4/WD),60-62 Ser. 20 (4/WD),65-66 Ser. 10-20,67 Ser. 10, G-20,67 Ser. 30 (exc. 11,000 lb. axle),68 Ser. 30 w/11,000 lb. axle (exc.
58-59
D- D ) ........................
z TON w/P/Trac.,(27/ max. I. D. x 1'/4 O.L.) ........... 1312281 2 .28
65 Ser. 10 w/leaf type springs ...... (oblong-19/3 O. L.)64 G-10 ...........................
.................. 502327 2 .0665-67 G-10,,,,,,,,,,, (2132 max. I.D. x s '/ 4 free length)....,,
54598855464520
22 .14
5.158 BOLT—WASHER —
RETAINER—RING, Parking Brake Lever Anchor
38-39 H, J (exc. HE, JE),40-42 PASS., KC, KD, AK, AL, BK, BL,46-5051-58
PASS., ' TON........ ,PASS., CORVETTE, 1/ TON (exc.
(/8_24 x 15/, 6 ) (w/eccentric)......... , 475492 2 651958 ';z TON w/P/Trac.),
59-60 CORVETTE ................... ( %-24 x 15/ 6 ) (w/o eccentric)) 3693605 2'/a TON (1st Ser.), .1155-57 '/, TON w/sgl. wheel (2nd Ser.)
(exc. Prop. Brake),60-63 Ser. 20 w/3-SPD., PG (exc.
4/WD, H.D.),60-63 Ser. 20 (4/WD) ................. (1Y O.L.) (w/o eccentric))PASS., t '2 TON, ' ' ' 3697393 2 1153-55 COMM. w/sgl. wheel (1st Ser.)
(exc. Prop. Brake),53-59 PASS., CORVETTE,55-59 Ser. 3 w/sgl. wheel (2nd Ser.) (exc.
Prop. Brake, 12 TON w/P/Trac.),60 Ser. 20 (D-D, 4 /WD),60-63 Ser. 20 (exc. D-D, 4/WD, 3-SPD.
H.D., 4-SPD.),61-62 Ser. 20 (D-D) w/3-SPD. (exc. H.D.),61-63 Ser. 20 (4/WD),63 Ser. 20 (exc. 3-SPD. H.D., 4-SPD.,
58-594 /WD, D-D) ...................
Ser. 3G w/4WD,WASHER, spring steel ('?; z hole) ....... 1300540 2 .12
58-59 PASS., 12 TON (exc. lZ TONw/P'Trac. ),
59-62 PASS., CORVETTE,60-62 Ser. 10,60-62 Ser. 20 (4/WD, D-D),60-62 Ser. 20 (exc. D-D, 3-SPD. H.D.,
4-SPD.) ...................... WASHER, spring ..................... 5454797 2 .12C-1967Chevrolet Motor Division 5.150-5.158General Motors Corporation 84 5
.70
.70
.70
.891.94.89
1.86
2.001.791.791.55
4R4R
• 6.6
3.163.162.64
2.82
2.64
65-67 CORVETTE .................... WASHER, pivot pin ................... 5465996 2 .2058-59 "2 TON w/P/Trac ................ RETAINER, parking brake shoe lever
anchorpin ........................ 3693520 2 .1067 CORVETTE .................... RETAINER, seal..................... 3897383 1 .7568 CORVETTE .................... RETAINER, underbody tunnel rear
console park brk. lever seal ......... 3918666 1 .4557-58 PASS. w/metallic linings,58-59 '/i TON (exc. P/Trac.),59 PASS.,60-62 PASS., CORVETTE, ' TON ...... RING, retainer ( /, R shaft dia.).......... 274560 1 (8.934)
5.380 BRACKET-BRACKET A S SY .-SUPPORT- REINFORCEMENT-MEMBER-MEMBER ASSY.-CUSHION ASSY.-SHIM, Rear Axle C ontrol Arm
58 PASS . ......................... left, upper......................... 3747871 158 PASS . ......................... right, upper........................ 3747872 158 PASS . ......................... lower,front........................ 3755830 259-64 PASS. (exc. STA. WAG.),63 STA. WAG ...................... upper ............................. 3774856 160-62 Ser. 10-20 (exc. D-D) ............ rear axle control arm frame .......... 3797969 264 STA. WAG ...................... upper ............................. 3841256 163-64 CORVETTE .................... rear suspension control arm bumper ... 3832776 263-68 Ser. 10 (D-D),63-68 Ser. 10-20 (exc. D-D, 4/WD) ...... frame ............................. 19992 265-66 PASS . ......................... left, lower inner (Budd frame) ........ 3858735 165-66 PASS . ......................... right, lower inner (Budd frame) ....... 3858736 165-66 PASS . ......................... right, lower outer (Budd frame) ....... 3858738 165-68 CORVETTE .................... left, rr, susp, control arm bumper ..... 6)61)1)045 165-68 CORVETTE .................... right, rr. susp. control arm bumper .... 6)666046 165-68 CORVETTE .................... rear suspension torque bumper ....... 6564277 158 PASS . ......................... BRACKET ASSY., left, lover .......... 3755833 158 PASS . ......................... BRACKET ASSY., right, lower ......... 3755834 159-62 PASS . ......................... BRACKET ASSY., left, lover frame ..... 3754695 159-63 PASS .......................... BRACKET ASSY., right lower frame (264 PASS. ......................... pivot bolt holes) ................... 3832256* 163-64 PASS . ......................... BRACKET ASSY., left lower frame
(2 pivot bolt holes) ................ 3832255* 1*NOTE: When using on STA. WAG. models which have brackets with (2) pivot bolt holes, use
lower hole. On STA. WAG. models which have brackets with (1) hole, and all othermodels with (1) or (2) holes, use upper hole.
63-67 CORVETTE .................... BRACKET ASSY., rear wheel spindlesupport strut ....................... 38 17827 1
65-66 PASS. w/Parallel edges.......... BRACKET ASSY., left, lower frame..... 3858795 165-66 PASS. w/Parallel edges.......... BRACKET ASSY., right, lower frame.... 3858796 165-66 PASS . ........................ BRACKET ASSY.. upper control arm .... 3856392 1
4.203.063.061.84
1 4.95
1 4.951 10.7;1 10.75
1 1 . R.S
2 1.851 3.10
1 3.101 1 075
1 1 0.75
1 ..6.5n
1 3.50
1 4.651 1.361 1.36
1 .84
1 .84
5.158-5.380 6-1967
846
Chevrolet Motor Division
General Motors Corporation
58 PASS. w/1 piece channel frame(exc. CONV.) ................. SUPPORT, left upper bracket .......... 3748927 1 1.2258 PASS. w/l piece channel frame(exc. CONV.) ................. SUPPORT, right upper bracket ......... 3748928 1 1.2259 PASS. (w/2 pc. welded channel
59frame) ......................
PASS.SUPPORT, upper bracket.............. 3758096 1 4.38
(w/1 pc. tube frame) ....... SUPPORT, upper bracket .............. 3758092 1 3.8759 PASS. (w/l pc. welded channelframe) ....................... SUPPORT, upper bracket.............. 3758094 1 4.05
63-68 CORVETTE .................... SUPPORT, left, control arm to spindle .. 382064.3 1 14.0.563-68 CORVETTE .................... SUPPORT, right, control arm to spindle . 3820644 1 14.0558 PASS . ......................... REINFORCEMENT, upper bracket ...... 3751601 2 .0763-64 CONV .......................... REINFORCEMENT, upper control armcrossmember....................... 3839871 1 1.2164 PASS. w/1 piece tube rail frame REINFORCEMENT, upper control arm
(327, 409) (exc. CONY.)........ crossmember (stamped #17) .......... 3845817 1 1.0864 PASS. w/l piece welded channelrail frame (327, 409) (exc. REINFORCEMENT, upper control armCONY.) ...................... crossmember....................... 3845818 1 1.08
64 PASS. w/2 piece welded channel REINFORCEMENT, upper control armrail frame (327, 409) ........... crossmember (stamped "S") ......... 3845819 1 1.0865-66 PASS . ......................... REINFORCEMENT, frame bracket ...... 3863923 1 .1866-68 PASS. w/H.D. Susp, (8 cyl,) ...... REINFORCEMENT, lowelower............. .3S 725388,9725 2 30PASS . ......................... REINFORCEMENT, upper control arm. 3900576 A.R. .2060-64 PASS. w/1 piece tube rail frame(exc. CONY.) .......... . ...... MEMBER, upper cross ..... , .......... 3841081 1 6.3060-64 PASS. (2 pc. tunnel floor w/weldedchannel rails) (exc. TAXI)...... MEMBER, upper cross. . . . . . . . . . ...... 3841083 1 6.3060-64 PASS. w/1 pc. welded channel railframe (exc. CONY.)............ MEMBER, upper cross ................. 3841082 1 6.3065-66 PASS. w/Parallel edges.......... MEMBER, upper cross ................ 3881660 1 8.6563-68 CORVETTE .................... MEMBER ASSY., rear suspension
mountingcross ..................... 3876576 1 27.9065-66 PASS. w/angled edges ........... MEMBER ASSY., upper cross , ...... , , , 3881662 1 9.2567-68 PASS. w/angled edges ........... MEMBER ASSY., upper croscross.......... .39016503901650 1 9.9PASS. w/parallel edges .......... MEMBER ASSY., upper ......... ....... 1901660 1 9.2563-68 CORVETTE .................... CUSHION ASSY., rear suspension rearmounting cross member .............. 9743971 2 3.1663-68 CORVETTE .................... SHIM, rear susp. torq. control arm (4 3/4 x/4 w/2 holes-"/,, dia.) .............. 3846595 A.R. .4063-68 CORVETTE ................. .. SHIM, rear susp. torq. control arm (4 3/4 x% w/2 holes-" 2 dia.) .............. 3846596 A.R. 3563-68 CORVETTE .................... SHIM, rear susp. torq. control arm (4 3/4 x'/ 2 w/2 holes-"/32 dia,) ............. 3846597 A,R. .3063-68 CORVETTE .................... SHIM, rear susp. torq. control arm (4 3/4 x/ w/2 holes-"/32 dia.) .............. 3846598 A.R. .30
5.381 SHAFT-BUSHING A SS Y , - P LATE- RETAINER, Rear Axle Control Arm
5859-64
PASS . .........................PASS
..................lower... ...... 3741808 2 3.69
59-64. .........................
PASSleft,lower......................... 3758363 1 3.69
63-68. ..... ............
CORVETTE (exc. Sp./Susp.) .....right, lower...,,.,,.,,,,,..,,.,,,,,left, rear wheel spindle support strut..
3758364 1 3.69
63-68 CORVETTE (exc. Sp./Susp.) ..... right, rear wheel spindle support strut38209293520930
11
570
63-68 CORVETTE w/Sp./Susp...........
left, rear wheel spindle support strut.. 352925.5 15.70
63-68 CORVETTE w/Sp./Susp.......... right, rear wheel spindle support strut. 38292666.75
58 PASS . ......................... BUSHING ASSY., upper, front .......... 374846214
6.75.6558 PASS .......................... BUSHING ASSY., upper, rear,
63-68 CORVETTE58
...................PASS. (exc. Air/S)
rear suspension torque control arm. . . 3743857 2 .95.............. BUSHING ASSY., lower control arm ..... 3738526 4 .96
C-1967Chevrolet Motor Division 5.380-5.381General Motors Corporation 847
lower front, R.H.,
lower front, L.H.,
lower front, R.H. and L.H. (3 notcheson outer flange) .................. 3758675 A.R. 1.00
BUSHING ASSY., lower rear, R.H. and L.H.,
lower rear, L.H.,lower rear, R.H. and L,H.,upper (3 notches on outer flange).lowerfront ........................ 3864586 A.R. 1_n;
BUSHING ASSY. (2'./, O.D.) .............1762012 2 1.10
BUSHING ASSY., lower front, R.H. and L.H., 3notches on outer flange ............. 3764034 A.R. 1.10
BUSHING ASSY., lower rear ............1856381 A.R. 1.45
BUSHING ASSY., upper rear ........... 3878372 A.R. 1.45
BUSHING ASSY., upper rear ........... 3888738 4 1.45PLATE, rear suspension torque controlRETAINER, rear suspension torque
armbushing ....................... 3819806 2 .38
58 PASS . ......................... upper (w/bushings)................. 3738516 158 PASS. w/Air/S ................. lower(w/bushings)................. 3755785 258 PASS. (exc. Air/S) .............. lower ............................. 3755832 259-64 PASS . ......................... upper (w/bushings) (2 yellow stripes) . 3824235 159-64 PASS. (exc. Air/S) .............. lower, left and right ................ 3774123 260-62 Ser. 10-20 (exc. 4/WD),63-68 Ser. 10-20 (exc. 4/WD)........... complete .......................... 3881314 263-65 CORVETTE (exc. Disc Brake).... left, torque control (less bolts)....... 3881537* 163-65 CORVETTE (exc. Disc Brake) .... right, torque control (less bolts)...... 3881538* 1
*NOTE: See BOLT 3818741 in group 5.002.65-68 CORVETTE w/Disc Brake ....... right, torque control (less bolts) ...... 3874770 165-68 CORVETTE w/Disc Brake ....... left, torque control (less bolts) ....... 3874769t I
tNOTE: See BOLT 3864037 in group 5.002.65 PASS.,66 PASS. w/4 arm Suspension (exc.
STA. WAG., H.D. Susp.),66 PASS. w/H.D. Suspension,66 STA. WAG ...................... upper ............................. 3856386 A.R.66 PASS. w/3 arm Suspension ....... upper ............................. 3878398 165-68 PASS . ......................... lower ............................ 5856379A 767-68 PASS. w/H.D. Susp .............. upper ............................. 3900541 1
ANOTE: When using for Special Performance Suspension. drill 3 holes for stabilizer bar attachment.
5.805.80S.1 0S.R0
14.1011.458.806.007.10
33.9034.9034.90
44.9014.90
59-61 PASS. (exc. STA. WAG., SDL.,PDL., TAXI, H.D. spring),
62-63 PASS. (exc. STA. WAG., TAXI) ...59-61 PASS. (exc. STA. WAG., SDL.,
P DL.),62-63 PASS. (exc. STA. WAG., TAXI,
H.D. spring) ..................59-61 TAXI,59-61 PASS. w/H.D. spring (exc.
STA. WAG.) ..................59-63 STA. WAG., SDL., PDL.,62-63 PASS. w/H.D. spring (exc.
STA. WAG.) ..................62-63 TAXI ..........................59-64 PASS. (exc. STA. WAG., SDL.,
PDL., TAXI, H.D. spring) ......59-64 TAXI,59-61 PASS. w/H.D. spring (exc.
STA. WAG.) ..................59-64 STA. WAG......................59-64 PASS . .........................65-68 PASS . .........................60-68 Ser. 10-20 (exc. D-D, 4/WD),63-68 Ser. 10 (D-D) ...................64 STA. WAG., SDL., PDL.,64 PASS. w/ H.D. spring (exc.
STA. WAG.) ..................64 TAXI ..........................65-68 PASS . .........................65 PASS.,66 PASS. w/H.D. Suspension,66 STA. WAG......................66-67 PASS. (exc. STA. WAG., H.D.
Susp.) .......................63-68 CORVETTE ....................63-68 CORVETTE ....................
BUSHING ASSY., lower front, L.H.,
5.382 ARM ASSY., Rear Axle Control
5.383 B OLT—NUT—WASHER—SPACER—CLAMP, Rear Axle Control A rm
58 PASS . ......................... upper, front ( 1/-20 x 3Ye) ............58 PASS . ......................... lower, front,59-64 PASS . ......................... upper and lower frt.58 PASS . ......................... upper, rear ( %-18 x 3) ............
3750056 2 .40
3758077 A.R. .453739833 1 .45
5.381 ©- 1967848
Chevrolet Motor DivisionGeneral Motors Corporation
60-62 Ser. 10-20,64-68 Ser. 10 (exc. 4/WD),64-68 Ser. 20 (exc. 4/WD, D-D) ......... right and left (" "U" bolt-7! throat) 3762198 A.R. 1.8060-62 Ser. 10-20 ...................... bushing attaching ( 3/4-10 x 4) (260
steel) .......................... 428792 2 (8.900)63 Ser. 10 (exc. 4/WD),63 Ser. 20 (exc. 4/WD, D-D) ......... left ("U" bolt) .................... 3824709 1 1.8063 Ser. 10 (exc. 4/ WD),63 Ser. 20 (exc. 4/WD, D-D)......... right ("U" bolt) .................... 3824710 1 1.8063-66 CORVETTE .................... rr. wheel spindle support arm and
brake assy. ('/ a -20 x 4°4a)......... 3846867 2 .3065-67 PASS ........................... upper and lower (S-a-18 x 4) ......... 868 A.R.(7 5?q^67-68 PASS . ......................... upper and lower ( siq -18 x 4) .......... 3904269 A.R.(7.529)68 CORVETTE w/T.H . ............. diff. carrier mounting bracket (/ 6 -20 x
413;6) ........................... 3921658 2 1. 9567 Ser. 10 (exc. D-D, 4/WD) ........ ( 4-11 x 4 1/2 ) ....................... 2270887 4 (5.506)58 PASS . ......................... NUT, upper, rear (/,-18) .............. 3739834 1 .1059-62 PASS . ......................... NUT, upper bracket attach. (,-20) .... 3722853 3 (6.172)60-64 Ser. 10 thru 30,63-68 PASS., CORVETTE ............. NUT ( -24) ......................... 3866766 A.R.(n.676)66 PASS . ......................... NUT,(9/6-18)........................ 9422304 2 (8.917)58 PASS . ......................... WASHER, upper arm bracket ( 1 3 3 ,) ...... 3754153 6 .0560-64 PASS . ......................... WASHER, (upper arm cross member
reinforcement attaching) ( 15/,,) ....... 3818180 A.R.(0.002)
58 PASS . ......................... SPACER, upper bracket .............. _ 3747866 A.R. .1459-63 PASS. (1st design) .............. SPACER, upper bracket (43 x 3
14 x
'/,thk.) ........................... 3758116 A.R. .1463-64 PASS. (2nd design) .............. SPACER, upper bracket (45 0 x 3'/a x
1/32thk. ) . ......................... 3847954 A.R. .15
65-66 PASS ........................ .. SPACER, upper (.062-.076 thick)....... 3841443 A.R. .1465-66 PASS .......................... SPACER, upper (.036-.046 thick)........ 3841444 A.R. .0566-68 PASS. w/H.D. Suspension ........ SPACER, lower ...................... 3888727 2 .4565-68 PASS . ......................... CLAMP, rr. axle lower control arm sorine 3888774 2 .2S
5.387 HOUSING-BOLT-NUT ASSY.- VENTILATOR-CONNECTOR-WASHER,Rear Axle
39-40 VF, WD w/2-SPD ................ (75.800-75.760 O.L.) (2 half moonindentations on rear face to left ofcenterline-6 half moon indentations
41-50 2/SPD . ............. . on front face seats weldedto housing) ...................... 605443 1 151.65
41 -48 PASS . ......................... .................................... 605336 1 40.9041-42 UTILITY (exc. H.D.) ............ (73.416-73.396 O.L.) (2 half moon46-50 1'/2 TON ....................... indentations rear face to right of
centerline-2 half moon inden-tations front face-spring seatswelded to top of housing) ......... 605339 1 118.75
47 -50 'Z TON ........................ ............................... 3847141 1 52.5050-52 3
/,, 1 TON (exc. 1 TON D-D) ...... .................................... 3694914 1 91.3551-54 PASS . ......................... .................................... 3703104 1 51.8051-53 ',= TON ............. . .......... .................................... 3696164 1 52.4551-55 1'.2 TON (1st Ser.) (exc. 2-SPD.) ..51-53 2 TON (exc. 2-SPD.) ............
....................................
....................................37053713702797
11
125.85148.80
51 -53 2-SPD . ........................ .................................... 3702798 1 156.2053-55 '/4 , 1 TON (1st Ser.) (exc. 1 TON
54
D-D) ........................
12 TON ............................................................ 3700016 1 91.35................................ 3707512 1 55.60
54-55 2-SPD. (1st Ser.) ................ .................................... 3707514 1 151.6555-56 PASS . ......................... .................................... 3730168 1 52.5055-59 ';i TON (2nd Ser.) (exc. P/Trac.),60 Ser. 10 (4/WD) .................. .................................... 3751890t 1 63.15
tNOTE: When installing on 1955-56 jobs it will be necessary to use rear springanchor Plate 3737372 (group 7.518).
55-59 ',a TON (2nd Ser.) (exc. D-D),60 Ser. 20 (4/WD) .................. .................................... 3774766 1 98.9055-59 D-D, 1 TON (2nd Ser.),60-62 Ser. 20 (D-D) ................... .............................. 3752663 1 108.9057 PASS . ......................... .................................... 3739443 1 52.5057 CORVETTE (exc. P/Trac.) ...... .................................... 3739688 1 52.50
4-1967Chevrolet Motor Division 5.383 -5.387General Motors Corporation 849
57-58 CORVETTE w/P/Trac. (exc. P.G.),S9 CORVETTE w/H.D. Brake/Susp ... .................................... 3755503 1 52.7058 PASS . ......................... .................................... 3750932 1 59.6058 CORVETTE (exc. P/Trac.) ...... .................................... 3752100 1 52.1058-59 TON w/P/Trac ................ (w/o flange plates) ................. 2381001 1 85.0059-62 CORVETTE (exc. P/Trac.) ...... .................................... 3773007 1 53.1559-62 CORVETTE w /P/Trac ........... .................................... 3773006 1 53.1560-62 Ser. 10 (exc. 4/WD) .............. .................................... 3768179 1 64.5060-62 Ser. 20 (exc. 4/WD, D-D) ........ .................................... 3768188 1 105.0060-62 Ser. 30 ......................... .................................... 3821017® 1 105.75
®NOTE: When using on C30 models, it will be necessary to remove left hand tee connectorbracket. On P30, remove right hand tee connector bracket.
59-64 PASS . ......................... .................................... 3777029 1 63.5061-62 Ser. 10 (4/WD),63 Ser. 10 (4/WD) (1st Ser.) ......... .................................... 3786278 1 57.5061 -62 Ser. 20 (4/WD) (1st design) ....... .................................... 3786259 1 96.5062 Ser. 20 (4/WD) (2nd design),63 Ser. 20 (4/WD) (1st Ser.) ......... .................................... 3820445 1 96.5063-64 Ser. 10 (exc. 4/WD) .............. .................................... 3847754tt 1 83.45
NOTE: Flange plates 3859655 left and 3859656 right must be used for 1963 models only.63-66 Ser. 10 (4/WD) (2nd Ser.)
(1st design) .................. .................................... 3866164 1 88.7563-66 Ser. 20 (4/WD) (2nd Ser.) ......... .................................... 3824202 1 105.7563-66 Ser. 20 (D-D) ................... .................................... 3794400 1 105.7563 -67 Ser. 20 (exc. 4/WD, D-D) ......... .................................... 3819769 1 105.7563-66 Ser. 30 (exc. dual wheels),67 Ser. 30 (exc. dual wheels shock
abs., D-D),67 Ser. 30 (D-D) ................... .................................... 3909797 1 98.9063-66 Ser. 30 w/dual wheels,67 Ser. 30 w/dual wheels (exc. shock
abs., D-D),67 Ser. 30 (D-D) (exc. dual wheels) ... .................................... 3909798 1 128.1564-66 G-10 w '3.36 ratio ............... .................................... 3857228 1 88.7564 G-10 (exc. 3.36 ratio) ............ .................................... 3867734 1 83.0065-66 G-10 (exc. 336 ratio) ............. .................................... 3857229 1 88.7565-66 Ser. 10 (exc. 4/WD) ............. .................................... 3866163 1 88.7565 PASS. w/10 bolt ring gear ....... .................................... 3866165 1 83.4565-68 PASS. w/12 bolt ring gear ....... .................................... 3917879 1 78.7065-66 Ser. 10 w/leaf type spring ........ .................................... 24480760 1 109.0065-66 Ser. 20 w/leaf type spring ........ .................................... 24570750 1 182.0066 PASS. w ' 10 bolt ring gear ........ .................................... 3886376 166 Ser. 10 (4/WD) (2nd design) ....... .................................... 3917860 1 83.0067-68 PASS. w/10 bolt ring gear ........ .................................... 3916069 1 78.3567-68 Ser. 20 (4/WD) .................. .................................... 3896847 1 105.7567 Ser. 30 w/157 W.B. (11,000 lb.
axle),68 Ser. 30 w/11,000 lb. axle (exc. D-D) .................................... 3902453 1 137.1567 Ser. 30 (D-D) w/1 1,000 lb. axle ... .................................... 3902454 1 137.1567-68 Ser. 30w/shock abs. (exc. D-D,
dual wheels),68 Ser. 20-30 (D-D) (exc. dual wheels) .................................... 3898043 1 98.9067-68 Ser. 30 (dual wheels w/shock
abs.) (exc. D-D),68 Ser. 20-30 (D-D) w/dual wheels ... .................................... 3898044 1 98.9067 Ser. 20 (D-D) ................... .................................... 3902445 1 105.7567-68 Ser. 10 (exc. 4/WD) .............. .................................... 3917864 1 88.7567 -68 G-10 w3.36 ratio ............... .................................... 3917869 1 88.7567-68 G-10 (exc. 3.36 ratio) ............ .................................... 3917868 1 88.7567-68 G-20 ........................... .................................... 3917867 1 105.7567-68 Ser. 10 (4/WD) .................. .................................... 3917863 1 83.0038-54 PASS., TON,53-55 CORVETTE,55-56 '^Z TON ........................ BOLT, hsg. to carrier ('/e-24 x 1 3/32 ) .... 348402 A.R. .2038-40 UTILITY ...................... BOLT, hsg. to carrier ( 5/8 -11 x 1'/4) ..... 370457 6 .3040-42 COMM.,46-56 TON ........................ BOLT, hsg. to carrier (/8 -24 x 1'/) ..... 3652348 4 .2040-55 UTILITY (1st Ser.) .............. BOLT, hsg. to carrier ( r/ 6 -20 x l') .... 3707480 6 (6.172)55-62 PASS., CORVETTE,63-64 PASS . ......................... BOLT, hsg. to carrier ( 3/-24 x 1 254 4 ) ... 3786363 10 .2557-59 '2 TON (exc. P/Trac.),60-62 Ser. 10 ........................ BOLT, hsg, to carrier short, hag. cover63 Ser. 10 (4/WD) (1st Ser.) ........ ( 4-24 x 1'/a) ...................... 3735727 A.R. .105.387
c_1967Chevrolet Motor Division
850 General Motors Corporation
57-59 '-i TON (exc. P/Trac.)60-62 Ser. 10,63 Ser. 10 (4/WD) (1st Ser.) ......... BOLT, hsg. to carrier long (4-24 x 1 7,^y) 3735728 4 .1063 CORVETTE .................... BOLT, diff. carrier frt. mtg. ( 7/ 6 -14x24) 6256398 2 .25
Not required in this group. Seegroup 9.008 ................... BOLT, (7/ 6 -14 x 5'.42) #2 body ........... 6257777 .35
58-61 PASS., CORVETTE ............. NUT ASSY., carrier attaching (3/8-24)( w/sealing washer) ................. 3750570 10 .3538-62 ALL, CORVETTE,
63-64 ALL,63 CORVETTE w/3-SPD.,64-68 CORVETTE,65-68 PASS.,66-68 Ser. 10-20, G-10-20 (1st design) ... VENTILATOR ... .................... 18208463 1 .24
§NOTE: For 2nd design see Connector 3889981.65 Ser. 10, G-10 ................... VENTILATOR ....................... 3766380 1 .40
Not required in this group. Seegrou p6.008 .................. VENTILATOR ....................... 2140049 .3066 Ser. 10, G-10 (2nd design),
67 Ser. 10, G-10-20 ................. CONNECTOR, axle ventilator.......... 3889981* 1 .1.5*NOTE: For 1st design see Ventilator 3820840.67 Ser. 10, G-10-20 ................. CONNECTOR, rear axle ventilator ...... 3889578 1 .1555-57 PASS.,56-57 CORVETTE .................... WASHER, carrier bolt ("/ 2 I.D. x''z O.D.) 1456254 10 (4.317)
5.390 STR AP—PLATE—BRACKET, Rear Axle Rebound
53-62 CORVETTE .................... (2914 dev. length) .................. 3774449 253-62 CORVETTE .................... PLATE, strap ( 3
/, x 14) ............... 3706115 853-62 CORVETTE .................... BRACKET, strap, (2 used on each side
member) .......................... 3706077 4
5.392 DEFLECTOR, Axle Housing Oil
38-42 COMM.,46-59 Y TON (exc. P/Trac.),60-62 Ser. 10,
1.89.05
.19
63 Ser. 10 (4/WD) (1st Ser.) ......... (3 I.D. x 3'2 O.D.) .................. 377706 238-54 PASS.,53-55 CORVETTE .................... (1% I.D. x 3/32 O.D.) ................ 3694711 238-53 UTILITY,54-55 1!/2 TON (1st Ser.) (exc. 2-SPD.),67 Ser. 30 (D-D) w/11,000 lb. axle,67 Ser. 30 w/157 W.B. (11,000 lb.
axle) ......................... (3'/b I.D. x 5'/2 O.D.) ................ 594314 2
.15
.18
.50
.35
.50
.42
.85
1 (7.526)
1 (7.526)
1 (7.526)2 3.2.5
46-55 COMM. (1st Ser.) (exc. '/2 TON),55-59 Ser. 3 (2nd Ser.) (exc. '2 TON),60 4/WD,60-62 Ser. 20-30 (exc. 4/WD),63-66 Ser. 20-30 (exc. 4/WD),66 Ser. 20 (4/WD),67 Ser. 20-30 (exc. 11,000 lb. axle). (2 2 4 2 I 25D. x 4 O.D.) 3819772
732..............
54-55 l'/ TON w/2-SPD. (1st Ser.),54-55 2 TON (1st Ser.) ................ (35/a I.D. x 5'Yb O.D. ) 3703701...............
5.394 RETAINER—BRACKET ASSY.. BRACKET—PLAT E, Rear Axle Bumper
55-57 PASS . ......................... (43/, 0.L.). . . . . . . .................. 371156163 Ser. 10,64-67 Ser. 10 (D-D),64-68 Ser. 10-20 (exc. D-D, 4/WD),6758
CORVETTE ....................PASS. w/2 piece channel rail
............................BRACKET ASSY.,
3820983
frame (exc. CONY.) ...........right (1°3 2 dia.
mountin hole)) ...... 375403658 CONV . ........................ BRACKET ASSY., left (/64 dia.mounting hole) ..................... 375403358 CONV . ........................ BRACKET ASSY., right (
33/64 dia.
mounting hole) ..................... 375403467 Ser. 10-20 (4/WD) ............... BRACKET ASSY., rear axle bumper ..... 3889249
2
2
2
2
X1967Chevrolet Motor Division 5.387-5.394General Motors Corporation 851
68 Ser. 10-20 (4/WD) ............... BRACKET ASSY., bumper ............. 391.r,2R2 2 1.9S60-61 Ser. 10 w/115 W.B. (exc. 4/WD),62 Ser. 10 (exc. 4/WD),62 Ser. 20 (exc. D-D) ............... BRACKET (1 13/16
x 546) ............... 3762197 2 .8564-66 G-10 ........................... BRACKET,left...................... 3852635 1 .8564-66 G-10 ........................... BRACKET,right..................... 3852636 1 .8567-68 G-10-20 ........................ BRACKET, left ...................... 3884295 1 9C67-68 G-10-20 ........................ BRACKET,right..................... 3984296 1 9560-61 Ser. 10-20 w/127 W.B. (exc. 4/WD) PLATE, anchor (1 3/4 x 6%) ............ 3761934 2 .60
5.395 BUMPER-STOP, Rear Axle
55-57 PASS . ......................... (2% x 2/16 ) ........................ 3719960 2 .4855-57 PASS . ......................... axle differential case (1 high) ...... 3738663 1 .2958-63 PASS. (1st design) ............. (/-l6 attaching bolt) .............. 3764438 2 .6763-64 PASS. (2nd design),,,,,,,,,,,,,, (no attaching bolt).................. 3832094 2 .5660-61 Ser. 10 w/102, 115W.B. (exc. 4/WD),62 Ser. 10-20 w/102, 115, 127 W.B.)
(exc. 4/WD) .................. .................................... 3762195 2 .7560-61 Ser. 10-20 w/127 W.B. (exc. 4/WD) .................................... 3765209 2 .8163 Ser. 10,64-68 Ser. 10 (exc. 4/WD),64-68 Ser. 20 (exc. D-D, 4/WD),67-68 Ser. 10-20 (4/WD) ............... .................................... 384.3849 2 .7563-64 CORVETTE .................... rear suspension torque control arm.... 3850161 2 1.0665-68 CORVETTE .................... rear suspension torque control arm.... 38642R0 2 .R264-66 G-10 ........................... .................................... 3852039 2 (7.535)65-66 PASS . ......................... pinion nose........................ 9770780 1 .3965-68 PASS . ......................... .................................... 3869845 2 .5567 PASS. (1st design) .............. pinion nose (2i" O.L.) ............. 3908008 1 .3067-68 PASS. (2nd design) .............. pinion nose (3''-" O.L.) ............. 535757 1 .6863-68 Ser. 20 (exc. 4/WD, D-D),67-68 Ser. 10 (SGL. UNIT) (exc. 4/WD) .. STOP, left ......................... 3829537 1 .5063-68 Ser. 20 (exc. 4/WD, D-D),67-68 Ser. 10 (SGL. UNIT) (exc. 4/WD) .. STOP, right ......................... 3829538 1 .50
5.398 COVER, Axle Housing with Filler Plug
38-42 COMM.,46-59 ' TON (exc. P/Trac.),60-62 Ser. 10,63 Ser. 10(4 WD) 1,1st Ser.) ......... .................................... 3795433 1 3.3540-55 UTILITY (1st Ser.) (exc. 2-SPD.,
H.D.) ........................ .................................... 3859336 1 3.3542-55 2-SPD. (1st Ser.) ................ (late axle identified by horizontal ribs) 3667226 1 3.7546-55 COMM. (1st Ser.) (exc. 12 TON),55-59 Ser. 3 (2nd Ser.) (exc. 2 TON),60-66 Ser. 20-30,67-68 Ser. 20-30 (exc. 11,000 lb. axle) ... .................................... 3680956 1 33558-59 '2 TON w/P/Trac.,60-64 4,'WD,65 Ser. 20 (4/WD),66 4/WD .......................... front (Dana 23384) .................. 3849237 1 3.0063 Ser. 10 (exc. 4/WD),63 Ser. 10 (4/WD) (2nd Ser.),64-68 Ser. 10,64-68 G-10-20 (exc. 3.36 ratio) ......... .................................... 3844177 1 2.0563-68 CORVETTE .................... diff. carrier........................ 3871374 1 21.0064-66 G-10 w'3.36 ratio (1st design),65 PASS. w/10 bolt ring gear (1st
design) ...................... .................................... 3832419 1 1.8465-66 Ser. 20 w 'leaf type spring ........ (Dana 24531X) .................... 2494735 1 3.3565-67 PASS. w'12 bolt ring gear ........ .................................... 3852998 1 1.8465-68 Ser. 10 ,, ,leaf type spring ........ .................................... 2457054• 1 3.0565-68 G-10 w/3.36 ratio (2nd design),65-68 PASS. w/10 bolt ring gear (2nd
design) (exc. STA. WAG.) ...... .................................... 3887261 1 1.84
5.394-5.398
x_1967Chevrolet Motor Division
852 General Motors Corporation
5.399 GASKET, Axle Housing Cover (Cork)
38-42 COMM.,46-58 1
2 TON (1st design),
58-59 'Z TON (2nd design) (exc. P/Trac.),60-62 Ser. 10,63 Ser. 10 (4/WD) (1st Ser.) ......... (fibre comp.). . . . . .. . . . . ........... 3752660 1 1.2538-55 UTILITY (1st Ser.) (exc. 2-SPD.
H.D.) ....................... (11% I.D. x 13'4 O.D.) ............... 370448 1 .6038-54 PASS.,53-55 CORVETTE ................... (95% I. D. x 10% O.D.) 593017 1 .4339-55 2-SPD. (1st Ser.) ................ (13 I.D. x 14% O.D.)46-55 COMM. (1st Ser.) (exc. % TON),
................ 3651369 1 .7055-59 Ser. 3 (2nd Ser.) (exc. ') TON),60-66 Ser. 20-30,67-68 Ser. 20-30 (exc. 11,000 lb. axle) , . (l042 I.D. x 12%4 O.D. 3665606 158-59 z TON w/P/Trac.,
............ .50
60-68 4/WD,65 Ser. 20 (4/WD),66-68 Ser. 10-20 w/leaf type springs .... front (Dana 32640)63 Ser. 10 (exc. 4/WD),
.................. 3849238 1 .6063 Ser. 10 (4/WD) (2nd Set.),64-68 Ser. 10,64-68 G-10 (exc. 3.36 ratio),67 G-20 ...........................64-68 G-10 w/3.36 ratio,
...................... 3844178 1 .9265-67 PASS. (w/10 bolt ring gear) .......65-67 PASS. (w/12 bolt ring gear).......
.... ............................... 3832420 1 .5865-67 Set. 20 w/leaf type spring ........
3852999 1 .5868 PASS. (w /10 bolt ring gear) .......
.................................... 2494737. 1 .73
68 PASS. (w/12 bolt ring gear) .......3931151 1
.................................... 3931152 1
5.400 PL UG—SCREW, Axle Filler and Drain
38-62 ALL (exc. 1958 '4 TON w/P/Trac. ),56-64 CORVETTE,63-64 PASS.,63 Ser. 10 thru 30 (exc. 4/WD),63 Ser. 10 (4 WD) (1st Ser.),64-67 Ser, 20 thru 30 .................. (1-20 sq. hd.-1'% dia. flange)........ 344829 1 .2053-55 CORVETTE .................... (1( hex. head)65-67 PASS. w/P/Trac.,
..................... 3704497 1 .7565-67 Ser. 10 w/P/Trac. (exc. 4/WD),65-67 G-10 w/P/Trac.,65-67 CORVETTE w/P/Trac. .......... w/instr. tag (1'/ 4 O.L.) .............. 3866433 168 Ser. 10-20, G-10-20 w/P/Trac., .3368 PASS. w/P/Trac. .......57-67 PASS., CORVETTE, 'i TON ......
.......................... ..........SCREW, drain/-20 x i )( '2 ^ "^e
39311713779764
1
68 ALL ...........................• • • .........
SCREW, drain ('4-20 x ", 6 )1 (1.453)
............ 3923420 1 (1.453)
5.401 GASKET—PLUG , Axle Plug and Screw
38-63 ALL (exc. ',2 TON w/P/Trac.),53-66 CORVETTE,64-67 Ser. 20-30,68 Ser. 30 w /11000 lb. axle ......... filler plug, leather (1 I.D. x 1 9 32 O.D,). 3714775 157-61 PASS., CORVETTE, '4 TON ...... drain screw, nylon ( 1/ I.D. x % O.D.) 513975
.0568AL
ALL ........................... GASKET, drain screw ( ' 2 I.D. x 75' s O.D.) 39219891 (1.456)
A.R.(1.4-6)............... PLUG, rear axle drain (magnetic) ('/_20) 3866776 A.R.(1.453)
5.403 SEAT—PLATE, Rear Spring (Se e group 7.518)
40-47 PASS.,48-54 PASS., '2 TON .................. (cast 3652 183) ..................... 3652182 2 3.8841-42 UTILITY, """"""'46-55 1 2 TON ....................... PLATE, "U" bolt anchor (cast 3686985) 3686985 2 3.70
—1967Chevrolet Motor Division 5.399-5.403General Motors Corporation 853
46-53 2 TON,67 Ser. 30 w/11,000 lb. rear axle
(exc. 133 W.B.),68 Ser. 30 (157 W.B. w/11,000 lb.
axle) (exc. D-D) ............... PLATE, "U" bolt anchor (cast 3681660) 3763717 2 4.1054-55 l/ TON w/2-SPD. (1st Ser.) ...... PLATE, "U" bolt anchor (cast 3707396)54-55 2 TON (1st Ser.) ................ (use w/round type housing) .......... 3707396 2 3.85
5.404 SEAL—BOLT, Rear Spring Seat
38-54 PASS.,47-54 '44 TON ........................ (rubber 1 I.D. x 1 7
/8 O.D. x 3/ 6 thick)... 597267 4 .15
38-54 PASS . ......................... BOLT, rear spring seat to axle hag.47-54 l2 TON ....................... ( '4-18 x 4 14 6 ) ...................... 597268 2 .25
5.415 ROD ASSY.—STRUT ASSY., Rear Axle
59-62 CORVETTE .................... radius ............................ 3760512 2 6.0559-64 PASS . ......................... tie, w/bushings .................... 3772145 1 5.4560-62 Ser. 10 (exc. 4/WD),60-62 Ser. 20 (exc. 4/WD, D-D) ......... tie, w/bushings .................... 3770952 1 7.6063-64 Ser. 10 (exc. 4/WD),63-68 Ser. 20 (exc. 4,AVD, D-D, 396)..... tie ............................... 3821233 1 7.2567-67 Ser. 10 (exc. 4/WD) .............. tie w/bushings..................... 3854906 1 6.2565 PASS. (exc. CAPRICE),65 CAPRICE w/H.D. Susp.),66-68 PASS . ......................... tie ............................... 3856396 1 5.2565 CAPRICE (exc. H.D. Susp.),66-68 PASS. (exc. STA. WAG., H.D. Susp.) tie ............................... 3901733* 1 6.85
' NOTE: When using 3901733 in place of 3879404, stud number 3901736 must also be used.68 Ser. 10 w, H.D. 4-SPD. (396),68 Ser. 20 (396) .................... tie ............................... 3930289 163-68 CORVETTE .................... STRUT ASSY., rear wheel spindle support 3819205 2 6.15
5.417 BUSHING ASSY.—CAM—CAM ASSY.—CAP, Rear Axle
59-64 PASS . ......................... tie rod,60-62 CORVETTE .................... radius rod ......................... 3764839 2 1.0060-66 Ser. 10 (exc. 4/WD),60-62 Ser. 20 (exc. 4/WD, D-D) ......... tie rod,63-68 CORVETTE .................... rr. wheel spindle supt. strut ......... 3775762 1 1.5063-68 Ser. 20 (exc. 4/WD, D-D) ......... tie rod ............................ 3829519 2 1.5065 CAPRICE (exc. H.D. Susp.),66 PASS. (exc. STA. WAG., H.D.
Susp.),68 PASS. w/H.D. Susp .............. tie rod ............................ 3866557 1 1.3465 CAPRICE w/H.D. Susp.),66-67 PASS. w/H.D. Susp .............. tie rod............................ 1374270 1 2.5063-67 CORVETTE .................... CAM, rear wheel spindle supt.
strut adj. ........ .................. 3790331 2 (6.172)63-68 CORVETTE .................... CAM ASSY., rear wheel spindle supt.
strut adj. (w /bolt) .................. 3820253 2 .6763-68 CORVETTE .................... CAP, rear wheel spindle supt. strut
bushing........................... 3791519 4 (6.170)
5.418 BRACKET — SUPPORT ASSY.—STUD—WASHER—CAP—BOLT, Rear Axle Tie Rod
59-64 PASS. w/1 pc. tube frame ........ frame (3 °/ b and 1'/2 holes) ........... 3755572 1 1.2259-64 PASS. w/1 pc. channel frame ..... frame (2 °/ 6 and 1 42 holes) ........... 3755747 1 1.2259-64 PASS. w/2 pc. channel frame , , . , . frame (2 °'1 b holes) ........ . . . . ... . . . 3755749 1 1.2259-62 CORVETTE .................... radius rod to frame (1 oblong 19
32 x29/32 hole) ....................... 3760508 2 2.92
59-62 CORVETTE .................... radius rod to axle .................. 3760603 2 .2360-62 Ser. 10-20 (exc. D-D, 4/WD),61-62 Ser. 10 (D-D) ................... frame (5 holes)..................... 3761872 1 1.7563-64 Ser. 10 (exc. 4/WD),63-68 Ser. 20 (exc. 4/WD, D-D) ......... frame ............................. 3819993 1 .9065-68 Ser. 10 (exc. 4/WD) .............. frame ............................. 3854910 1 1.3065-68 PASS . ......................... frame ( Budd)....................... 3858718 1 1.225.403-5.418 _1967
854Chevrolet Motor Division
General Motors Corporation
65 PASS.,66 PASS., (exc. SPT. MDLS.),66 CONY. w/Parallel edges......... frame67-68 PASS. (exc. SPT. MDLS.),
............................. 3858804 1 1.26
67-68 CONY. w/Parallel edges ......... frame63-68 CORVETTE ................... ............................
SUPPORT ASSY., rear suspension3895856 1 1.30
59-62 PASS., CORVETTE,outer mounting (5 1.s O.D.) ............ 3775513 2 4.75
63-64 PASS. ........................ STUD, attaching (/ 6 -18 x 3 "/ 6 ) 3758081 A.R. .4565-68 Ser. 10 (exc. 4/WD) ............. STUD, tie rod to axle w/bushing (563/b4
65-66 PASS. (H.D. Suspension w/Sp.O.L.) ............................. 3854909 1 1.00
H/Per.) (396, 427) (exc.STA. WAG.),
65-66 STA. WAG . .......................STUD, tie rod to axle ( 94 4 -18 x 4) ...... 3856401 1 .5065 CAPRICE (exc. Sp./H/Per. 396,H.D. Suspension,
66 PASS. (exc. Sp./H/Per., 396, 427, STUD, tie rod at axl e (% b -18 xH.D. Suspension, STA. WAG.). 438)
67-68 PASS . ................68 Ser.
......... ..........STUD, tie rod at axle (°/ 6 -18 x 4'/6) ....
38794053901736
1 .821 .5020 (396) ....................
58-62 CORVETTESTUD, tie rod to axle (81 O.L.) ........ 3930292 1 8.75.................... WASHER, attaching, radius rod stop .... 3764526 2 .2559-68 PASS . ......................... WASHER, attaching (°/ b ), tie rod ........ 3758854 A.R. .1065 CAPRICE (exc. Sp./H/Per. 396),
66-67 PASS. (exc. Sp./H/Per. 396, 427,H.D. Suspension, STA. WAG.) ... WASHER, at axle (°1b) ................ 3879406 1 .1065-67 PASS . ......................... BOLT, tie rod to frame (i; M1 -18 x 3) .... 3917528 1 .25
5.420 SHAFT, Axle
40-46 COMM. (exc. DR, DS) ............ left (28/4 O.L.) (stmp'd 3652341) ..... 3652341 1 15.9540-46 COMM. (exc. DR, DS) ............ right (29 3/4 O.L.) (stmp'd 3652342) .... 3652342 1 15.9540-42 UTILITY (Reg. Prod.)(exc. 2-SPD ................... left (10 splines-34'4 O.L.-splined
46-55 1'Z TON (1st Ser.) (exc. 2-SPD ) ... hub end) (stamped 3685191) ........ 3685191 1 21.7040-42 UTILITY (Reg. Prod.) (exc,2-SPD.) ...................... right (10 splines_40% O.L.-splined
46-55 1'62 TON (1st Ser.) (exc. 2-SPD.)... hub end) (stamped 3685192) ........ 3685192 1 21.7041-46 2-SPD. w/Mech. Shift ............ w/out tapered stud holes (38'/ O.L.)
41-48 PASS(stmp'd 3661899) ................. 3661899 2 22.95
42-46. ............. .
M, Ow/H.D. (exc. 2-SPD.)right (305/,O.L.) (stmp'd 3657314) .....left
3657314 1 16.50...... , , (16 splines-36'4 O.L.) (stamped46-51 2 TON ......................... 3702227)(splined hub end)........ 3702227 1 24.104:'-46 M,O w/H.D. (exc. 2-SPD.)........ right (16 splines-41 O.L.) (stamped46-51 2 TON (exc. 2-SPD.) ......... . ... 3702228) (splines hub end) ........ 3702228 1 24.1042-46 M,O w/H.D . .................... right (16 splines-40 O.L,) (stamped46-51 2-SPD. w/Vac. Shift ............. 3702230) (splined hub end) ........ 3702230 1 24.1046-59 '/„ 1 TON,60-61 Ser. 20 (D-D, 4/WD),62-67 Ser. 20 (D-D),62 Ser. 20 (4/WD) (1st design) ....... left (17 splines-31 5/, 2 O.L.) (stamped
46-59 '/a , 1 TONT-17) ........................... 3762917 1 21.65
60-61 Ser. 20 (D-D, 4/WD),62 Ser. 20 (4/WD) (1st design),62-67 Ser. 20 (D-D) ................... right (17 splines-37',2 O.L.) (stamped
47-50 '/ TONT18) ............................ 3762918 1 21.65........................ left (17 splines-29% O.L.) (stmp'd
47-50 '/ TON,, , , , , , , , , ,,,, , , ,,3683161) ........................
right (17 splines-3038 O.L.) (stmp'd3683161 1 20.65
49-50 PASS3683162) ........................ 3683162 1 20.65. ......................... left (28 1/2 O.L.-3 1
/% dia. pilot) (stmp'd
49-50 PASS3687767) ............ .... 3687767 1 18.50. ......................... right (29 1/2 O.L.-3 1
/e dia. pilot) (stmp'd
51-54 PASS3687768) .................... ... 3687768 1 18.50. ......................... left (28'/3 O.L.-2 34 dia. pilot) (stamped
53-55 CORVETTE . . 3694755)51-54 PASS. ...................
,right (29'4 O.L..-2 3/4 dia. pilot) (stamped
3694755 1 18.5053-5551-59
CORVETTE .......',2 TON (exc. P/Trac.)
3694756) . 3694756 1 18.50... , , , , .... left (17 splines-29 54 O.L.) (stmp'd60-61 Ser. 10 ......................... GM641)......................... 3832641# 1 21.65
IC-1967Chevrolet Motor Division 5.418-5.420General Motors Corporation 855
51-59 ./Z TON (exc. P/Trac.) ........... right (17 splines-30 5/ O.L.) (stmp'd60-61 Ser. 10 ......................... GM642) ........................ 3832642# 1 21.65
NOTE: It will be necessary to use (6) 3851677 bolt.52-53 2 TON ......................... left (27 splines-36'/ O.L.) (stamped
3702219) ........................ 3702219 1 24.1052-53 2 TON (exc. 2-SPD.) ............. right (27 splines_41 O.L.) (stamped
3702220) ........................ 3702220 1 24.1052-53 2-SPD .......................... right (27 splines-40 O.L.) (stamped
3702222) ........................ 3702222 1 24.1054-55 1'/z TON w/2 -SPD. (1st Ser.) ...... left (29 splines-36 3/4 O.L.) (stmp'd54-55 2 TON (1st Ser.) ................ 3702295) ........................ 3702295 1 24.9054-55 2 TON (1st Ser.) (exc. 2 -SPD.) .... right (29 splines-41'4 O.L.) (stmp'd
3702296) ........................ 3702296 1 24.9054-55 2 -SPD. (1st Ser.) ................ right (29 splines-40 O.L.) (stmp'd
3702298) ........................ 3702298 1 24.9055-56 PASS . ......................... left (17 splines-28"/ 6 O.L.) (cast DEE
3714781) ........................ 3714781 1 17.5555-56 PASS . ......................... right (17 splines-30 5/ 6 O.L.) (cast56 CORVETTE .................... AAC-3714782) ................... 3714782 1 17.5557 PASS.,57-62 CORVETTE,58 PASS . ......................... left (17 splines-28½ 6 O.L.) ......... 3775689 ® 1 20.0557-58 PASS.,57-62 CORVETTE .................... right (17 splines-30 6 O.L.) ........ 37756904 1 20.05
&NOTE: Use 3851677 rear hub bolt.58-59 ',z TON w/P!Trac ................ (20 splines-30?/ O.L.) .............. 2346810 2 26.7559-64 PASS . ......................... left (17 splines-29'z O.L.) .......... 3798183 1 20.5059-64 PASS . ......................... right (17 splines-3014 O.L.) ......... 3798184 1 20.5060-68 Ser. 20 (exc. D-D, 11,000 lb. axle),60-68 Ser. 30 (exc. 11,000 lb. axle) ..... left (stamped T49) .................. 3759849 1 21.2060-68 Ser. 20 (exc. D-D, 11,000 lb. axle),60-68 Ser. 30 (exc. 11,000 lb. axle) ..... right (stamped T50) ................. 3759850 1 21.2062 Ser. 10,63 Ser. 10 (4/WD) (1st Ser.) ......... left (17 splines-30 5/8 O.L.) .......... 3832643 1 21.6562 Ser. 10,63 Ser. 10 (4;'WD) (1st Ser.) ......... right (17 splines-31 54 O.L.) ......... 3796840 1 21.6563-64 Ser. 10 (exc. 4/WD),63-64 Ser. 10 (4/WD) (2nd Ser.) ......... (17 splines-30 354 4 O.L.) ............. 3819048 2 22.7563-68 CORVETTE .................... .................................... 3872908 2 17.1564 G-10 w/3.36 ratio ............... (3119/64 O.L.) ....................... 3833457 2 21.6564 G-10 (exc. 3.36 ratio) ............ (17 splines-31 5/ 6 O.L.) ............. 3849266 2 21.6565-68 PASS. w/12 bolt ring gear ........ (30 splines-31 17/64 ) (stamped 997)
(5 hole flange) .................... 3852997 2 20.5065-68 Ser. 10 ......................... (30 splines-30 35/64 O.L.) (6 hole flange) 3893605 2 22.7565-67 G-10 (exc. 3.36 ratio)............ (30 splines) ....................... 3859321 2 17.0065 PASS. w/10 bolt ring gear,65-67 G-10 w/3.36 ratio (w/10 bolt
ringgear) .................... (28 splines-31 19/64 O.L.)............. 3863728 2 19.7565-66 Ser. 10 w/leaf type spring ........ right (3159 O.L.) .................... 2494738• 1 33.2565-66 Ser. 10 w/leaf type spring ........ left (29 54O.L.) ..................... 2494739• 1 32.5065-66 Ser. 20 w/leaf type spring ........ (30 splines-3514 O.L.) .............. 24036940 1 25.5066-67 PASS. (w/10 bolt ring gear)....... (28 splines) ....................... 3877830 2 18.7567-68 G-20 ........................... (30 splines-31 31/,., O.L.) ............ 3894442 2 21.7067-68 Ser. 30 w/11,000 lb. axle ......... (27 splines-37!2 O.L.) (stamped T16). 3762916 2 21.65
5.422 SPACER-LOCK-BOLT-STUD-SLEEVE, Axle Shaft
38-42 COMM.,46-59 '/s TON (exc. P;'Trac.),60-61 Ser. 10 ......................... narrow (1.1485) .................... 370217 1 1.2838-42 COMM.,46-59 '2' TON (exc. P/Trac.),60-61 Ser. 10 ......................... wide (ground 4 sides) (1.575 and 1.1675) 372515 1 1.2838-54 PASS . ......................... wide (ground 4 sides)(1.9095 and 1.0295) 473603 1 1.2338-54 PASS . ......................... wide (identified by blue paint on rough53-55 CORVETTE .................... side) (1.0345) .................... 597254 1 1.2338-54 PASS.,53-55 CORVETTE .................... narrow (1.012) ..................... 597251 1 1.23
5.420-5.422
J-1967Chevrolet Motor Division
856 General Motors Corporation
47-53 UTILITY w/splined hub,54-55 11,/ TON (1st Ser.) (exc. 2-SPD.),67 Ser. 30 (D-D) w/11,000 lb. axle,67 Ser. 30 w/157 W.B. (11,000 lb.
axle),68 Ser. 30 w/11,000 lb. axle (exc.
54-55D-D) .........................
1' 2 TON w/2-SPD. (1st Ser.),thrust (3' 3
/ 6 O.D., 1?i6 wide) ......... 3685197 2 .75
54-5538-54
2 TON (1st Ser.) ................PASS.,
thrust (4'/32 O.D.) ..................""""""""" 3703705 A.R. .7553-55 CORVETTE .................... LOCK (horse shoe) ................... 472613 238-42 COMM., .2338-59 Y TON (exc. P/Trac.),60-68 Ser. 10, G-10-20,65-6840-47
PASS . .........................UTILITY
LOCK (horse shoe) ................... 3833322 2 .2340-47
. . . . . . . . . .. .......... ..UTILITY
LOCK, bolt (tangs on face—for '/2 bolt) , . 3653926* 2 .35.......................*NOTE: Not used w/splined type shaft
BOLT (Y-13 x 1 1 Yz) ......... •.......and hub.
3653927* 16 .2546-55 COMM. (1st Ser.) (exc. '.z TON),55-59 Ser. 3 (2nd Ser.) (exc. Y TON) .. • . BOLT (hex. hd. 1
/-13 x 1 Y) . • • , • • , . , . , 427566 16 (8.900)39-40 2-SPD. w/taper hole flange ....... STUD, shaft to hub ('/a-14 x 2 Y4 ) 3651377 1639-46 2-SPD, w /taper hole flange .............
SLEEVE, shaft stud lock.40.............. 3651372 16 .35
5.425 YOKE ASSY . — FLANGE— DEFLECTOR, Rear Axle Universal Joint
63-68 CORVETTE (exc. 396, 427
65-68w/P/Trac.)
CORVETTE w/P/Trac.diff. carrier 7-joint ................ 3832031 2 9.40
63-68.........
CORVETTEdiff. carrier 7-joint ................. 3872922 2 13.05
63-68....................
CORVETTEFLANGE, rear wheel U-joint yoke ...... 3843018 2 8.55
63-68....................
CORVETTEDEFLECTOR, diff. carrier U-joint yoke . 3819195 2 .14.................... DEFLECTOR, rear wheel spindle
flangedust ........................ 3820241 2 .24
5.428 RING—LOCK—BOLT—CA —ROLLER—REPAIR KIT—BEARING ASSY.,Rear Axle "U" Joint
63-6863-68
CORVETTE ....................CORVETTE
diff. carrier U-joint yoke retaining .... 3819196 2 .1063-64
....................CORVETTE
LOCK, yoke flange bolt (round bridge) .. 3860543 4 .1065
...........CORVETTE Sp. /H/Per. (396),
BOLT, yoke flange ('/ 6 -20 x 1 ..... ,e) 454972 A. R. (8.900)66-68 CORVETTE (427) ............... CAP, rear drive shaft 7-joint bearing.... 3872909 4636 -68
CORVETTE .................... ROLLER, rear wheel drive shaft U-joint. 7450409 A.R.3.75.02CORVETTE .................... REPAIR KIT, rear wheel driveshaft
65-68 CORVETTE ....................U-joint ............................
BEARING ASSY., U-joint trunnionyoke .3889696 4 8.003847933 16 .95
5.430 SEAL ASSY., Rear Axle "U" Joint
63-6864-68
CORVETTE ....................CORVETTE
diff. carrier U-joint yoke brg. oil ..... 3820419 2 .85.................... rr. wheel drive shaft U-joint yoketrunnionbrg ........................ 3847932 16 .10
5.432 HANGER—SUPPORT—BOLT STRAP—WASHER, Propeller Shaft
47-55 COMM., UTIL. (1st Ser.) (exc. YTON, QP, RP, SP, TP, UP,
47-55VP, S) .......................
2 TON, SBC, TY, UY, VYfront, bearing supt., w/o bolts ....... 3688455 1 2>15
53-55(1st Ser.) ............... ...
X (1st Ser.( )•inter., bearing supt., w/o bolts....... 3688494 1 0
55• • • • • • • • . • ..........
G, K w/3-SPD. (2nd Ser.) (exc.inter., bearing supt., w/o bolts...... 3703584 1 1.755
H.D.),56-59 Ser. 3D-3F w/3-SPD. (exc. H.D.),60-62 Ser. 20 (D-D) w/3 SPD. (exc. 104
W.B., H.D.),63-67 Ser. 20 (D-D) (exc. 3-SPD. H.D.,
4-SPD., 104 W.B.) ............. front bearing support (stamped "AD"). 3718838 1 1.65
4'-1967Chevrolet Motor Division 5.422-5.432General Motors Corporation 857
55 Ser. 3 (2nd Ser.) (exc. G, K w/reg.prod. 3-SPD.),
60-64 Ser. 20-30 (D-D) w/3-SPD. H.D.,4-SPD., H.T. (exc. 104 W.B.),
65-67 Ser. 20-30 (D-D) (exc. 104 W.B.) ... front bearing support ................ 3714143 1 1.6560-62 Ser. 10-20 w/3-SPD. H.D., 4-SPD.
(exc. D-D, 4/WD, 115 W.B.)..... front, support ...................... 3763335 1 2.0060-63 Ser. 30 (exc. D-D),64-68 Ser. 30 w/133 W.B. (exc. T.H.) ... front, support ...................... 3763369 1 1.8563 Ser. 10 w/127 W.B. (exc. 4/WD),64-67 Ser. 10-20 (127 W.B. w/3-SPD.
H.D., 4-SPD.) (exc. 4/WD)...... front, support ...................... 3820364 1 .9664-66 Ser. 10 (SGL. UNIT) w/3-SPD.
(exc. 4/WD),64-66 Ser. 10-20 (127 W.B. w/3-SPD.)
(exc. 4/WD),64-66 Ser. 10 (115 W. B. w/4.11 ratio) (283),67-68 Ser. 10 w/115 W.B. (T.H. w/6 cyl.)68 Ser. 10-20 (exc. 4-SPD., D-D, 4-WD) front support ....................... 3843848 1 1.2566 Ser. 30 w /T.H. (exc. D-D) ........ front, support ...................... 3882315 1 2.2567 Ser. 10-20 (CONY.) w/4-SPD.
trans. (exc. 115 W.B.),67 Ser. 10 (CONV.) (115 W.B.
w/4-SPD. trans. (exc. 8 cyl.) ... front support ....................... 3893081 1 .9067 Ser. 30 (D-D) w/125, 137 W.B.
(11,000 lb. axle) .............. front bearing support (stamped JY).... 3904720 1 4.5067-68 4/WD w/127 W.B . ............... front bearing support................ 3914421 1 3.7568 Ser. 10-20 w/115 W.B. (4-SPD. w/8
cyl.) ......................... front bearing support................ 3920494 1 .9068 Ser. 10-20 w/127 W.B. (4-SPD.
Trans.) ...................... bearing support .................... 3920495 1 .9068 Ser. 10 w/115 W.B. (396 w/New
Process 4-SPD.) .............. front support ...................... 3933252 1 2.5068 Ser. 10 w/HD. 3-SPD,68 Ser. 10 w/T.H.(396) ............. bearing support .................... 3933264 141-47 UTIL., AN, BN, DS, ES (exc. WD,
YU, MU, OH, PP, QP) ......... SUPPORT, frt. brg. (use w/dbl. row brg.),41-47 YT, MT, OY, OG, PX, QX ........ inter. brg. (use w/dbl. row brg.) ...... 3678780 1 5.0548-55 1 TON, UTIL. (1st Ser.) (exc. RP,
SP, TP, UP, S),54-55 '/, TON (1st Ser.) ................ SUPPORT, frt. brg. (use w/dbl. row brg.),48-55 2 TON (SEC), TY, UY, VY, X (1st
Ser.) ......................... inter. brg. (use w/dbl. row brg.)...... 3710019 1 5.1055-59 3/, TON (COWL) w/H.D., 4-SPD.
(2nd Ser.) .................... SUPPORT, frt. brg. (use w/dbl. row brg.) 3714145 2 .5055 G, Kw /3-SPD. (2nd Ser.) (exc. H.D.),56-59 Ser. 3D-3F w/3-SPD. (exc. H.D.),60-62 Ser. 20 (D-D) w/3-SPD. (exc. 104
W.B., H.D.),63-68 Ser. 20 (D-D) (exc. H.D. 3-SPD,
T.H., 4-SPD., 104 W/B) ........ SUPPORT, frt. brg. (use w/dbl. row brg.) 3718835 2 4.6555-57 M, Ser. 3B, 3/, TON w/H.D.,
4-SPD. (2nd Ser.) (exc. D-D),55 G, K w/Prop. Brake (2nd Ser.),55-59 1 TON (2nd Ser.),56-59 Ser. 3D-3F w/Prop. Brake,60-62 Ser. 10-20 w/3-SPD. H.D., 4-SPD.,
A.T. (exc. 102, 104, 115 W.B.),60-67 Ser. 30 (exc. 104 W.B. T.H.),63 Ser. 10 w/3-SPD. H.D., 4-SPD.
(exc. D-D, 4/WD),63-67 Ser. 20 w/3-SPD. H.D., 4-SPD. "
(exc. 104 W.B., 4/WD),64-67 Ser. 10-20 (127 W.B. w/3-SPD.
H.D., 4-SPD.) (exc. 4/WD),67 Ser. 10 (4/WD) w/127 W.B. (8 cyl.),67 Ser. 10 (4/WD) (8 cyl.) ........... SUPPORT, frt. brg .................... 3735361 1 1.5558-64 PASS.,64-67 Ser. 10-20 (exc. D-D, 4/WD) ...... SUPPORT, w/cushion ................ 3860801 1 4.1262 4/WD w/3-SPD .................. SUPPORT, frt. brg. (2 wide .-7 3/4 wide) , , 3723616 1 1.1567-68 Ser. 30, w/T.H.68 Ser. 20 (D-D) w/T.H . ............ support bearing .................... 3902590 2 12.95
5.432 i- 1967Chevrolet Motor Division
858 General Motors Corporation
47-55 COMM., UTIL. (1st Ser.) (exc. 12 BOLT, brg. support hanger (front and inter.)TON, RP, SP, TP, UP, VP, S).... ( /2 -20 x 14) ...................... 3688475 A.R. .10
55-61 ALL w/drilled support ........... BOLT, brg. support hanger ('/ 6 -20 x 1 3/ 6 ) 453719 A.R.(8.900)67 ALL w/Prop. Brake ............. STRAP, front ('/ wide x 6/8 long x
/64thk. ) ........................... 2343148 A.R. .10
60-61 Ser. 10 thru 30 ................. WASHER, prop. shaft and bearing support(1'/8 x 1 21/ 2
w/'2 sq. hole) ........... 3767286 1 (1.270)
5.433 SEAL-RETAINER, Propeller Shaft
41-53 'ia TON ........................ frt. prop, shaft bearing .............. 3689176t 1 1.65iNOTE: Used w/prop. shafts machined part length and w/Brg. Seal Sleeve pressed on.
48-55 1 TON, UTIL. (exc. RP, SP, TP,UP, VP, S) (1st Ser.),
54-55 % TON (1st Ser.),55 G, Kw /3-SPD. (2nd Ser.) (exc. H.D.),56-59 Ser. 3D-3F w/3-SPD. (exc. H.D.),63-68 Ser. 20-30 (D-D) (exc. 104 W.B.
3-SPD. H.D., 4-SPD.),67-68 Ser. 30 w/T.H. (exc. D-D) ........ RETAINER, front, grease retainer,48-55 2 TON SBC, TY, UY, VY, X
(1st Ser.) ..................... inter prop. shaft brg. grease ......... 3685957 A.R. .4055-59 1 TON (2nd Ser.),55 i, 'q TON w/H.D., 4-SPD.
(2nd Ser.) (exc. H),56-59 ',z, '/4 TON w/H.D., 4-SPD.
(exc. Ser. 3A),55 G, K w/H.T. (2nd Ser.),56-59 Ser. 3-D-3F w/H.T.,60-62 Ser. 10-20 (127 W.B. w/3-SPD.
H.D. 4-SPD., PG.),60-62 Ser. 20-30 (D-D) (125, 136 W.B.
w/3-SPD. H.D., 4-SPD., H.T.),60-67 Ser. 30 (exc. 104 W.B.),63-67 Ser. 10 (127 W.B. w/3-SPD. H.D.,
4-SPD.) (exc. D-D, 4/WD),63-67 Ser. 20 w/3-SPD. H.D., 4-SPD.
(exc. 104 W.B., 4/WD),67 Ser. 10 (4-WD) w/127 W.B. (8 cyl.) , RETAINER, front prop, shaft brg. grease67 Ser. 20 (4/WD) (8 cyl.) .......... (14 I.D. x 2's O.D.) ................. 3714169 2 .50
5.435 HOUSING ASSEMBLY, Front Propeller Shaft
48-53 '4 TON ......................... (length 31 "/3z)................... .. 3685993 1 14.60
5.436 SHAFT-BEARING-BEARING UNIT-KIT-SUPPORT UNIT, Front PropellerShaft, Front Propeller (Shaft does not attach to rear axle)
Part ListNo. Price
609025 29.803689205 27.253689206 36.153689207 22.303689208 30.953690190 11.103707196 25.703707197 28.103707198 30.003707201 24.753707202 28.103707203 31.103707204 39.753707205 29.353707206 33.903717093 36.803717096 39.503718004 36.803718005 29.753721460 42.50
-1967Chevrolet Motor DivisionGeneral Motors Corporation
Part List Part List Part ListNo. Price No. Price No. Price
3750746 15.00 3877071 34.50 3907980 19,003750747 15.00 3877072 36.25 3907982 47.753750748 15.00 3890120 38.45 3907987 30.003758579 15.00 3890121 31.70 3907991 35.253758580 15.00 3890155 31.80 3907992 47.253758581 15.00 3890160 37.30 3910172 46.753768972 38.80 3907917 47.00 3910196 31.753768976 41.15 3907918 52.50 3910197 28.003771377 33.00 3907919 52.75 3910198 29.253830039 38.80 3907966 46.00 3914171 35.503847095 21.75 3907968 45.25 3914177 43.503847096 30.40 3907969 46.50 3921199 35.503852316 15.00 3907970 45.75 3921460 36.253852318 15.00 3907971 45.50 3921461 39.753852338 33.85 3907972 45.25 3921462 40.503852486 37.50 3907973 46.25 39295763852556 37.30 3907974 45.25 39295783852557 34.00 3907975 45.75 3929579 58.253865264 28.50 3907979 18.00 3929595 48.503865265 31.95
5.432-5.436859
SupportType O.L. Splines Unit Shaft
47 ', TON ......................... A (w/nut) 3443/64 10 3690190tt 147 ES, QJ, QV ..................... D (w/nut) 35 10 3847095t 1
tNOTE: Also found in intermediate section of this group.47 QK, QL, QW, QX ................ D (w/nut) 58/0 10 3847096 1
''NOTE: Includes brg. seal sleeve. (See group 5.433 for correct seal).48-53 ALL w/137, 179 W.B ............. D (w/nut) 32'4 10 3689205 148-53 UTILITY (exc. 137, 179 W.B.,
COE) ........................ D (w/nut) 56'3/6 10 3689206 148-53 COE w/134 W.B ................. D (w/nut) 294 10 3689207 148-53 COE w/158 W. B ................. D (w/nut) 537/0 10 3689208 154-55 3/4 TON (1st Ser.),54-55 1 TON w/3-SPD. H.D. (1st Ser.)... E 33"/6 16 3707196 154-55 3/4 , 1 TON, N w/4-SPD. (1st Ser.) .. E 36 16 3707197 154-55 1 14 TON (1st Ser.) (exc. N) ....... E 60 16 3707198 154-55 T (1st Ser.) ..................... E 343/8 16 3707201 154-55 U (1st Ser.) ..................... E 57 16 3707202 154-55 V (1st Ser.),54-55 N w/2-SPD. (1st Ser.)............ E 36'/8 16 3707203 154-55 W (1st Ser.),54-55 P, R w/2-SPD. (1st Ser.)......... E 601i 3707204 154-55 X (1st Ser.) ..................... D 3254 10 3707205 154-55 2 TON (SBC) (1st Ser.)........... D 5611/6 10 3707206 155 G, K w/3-SPD. (2nd Ser.)
(exc. H.D.),56-59 Ser. 3D-3F w/3-SPD. (exc. H.D.),60-62 Ser. 20 (D-D) w/3-SPD. (exc. 104
W.B., H.D.),63 Ser. 20 (D-D) w/3-SPD., P.G.
(exc. 104 W.B., H.D.).......... E 2716 16 3721460 155-59 D-D, 1 TON, (2nd Ser.),60-62 D-D w/H.T. (exc. 104 W.B.) ...... E 271/2 16 3765513 3718005 155-59 1 TON (2nd Ser.) (exc. H.T.),55 M, 3/4 TON w/H.D., 4-SPD.
(2nd Ser.) (exc. F),56-59 Ser. 3B-3D-3E-3F w/H.D., 4-SPD.,60-66 Ser. 20-30 (D-D) w/3-SPD. H.D.,
4-SPD. (exc. 104 W.B.),67 Ser. 20-30 (D-D) w/125, 137 W.B... E 36 V32 16 3765513 3717093 155 Ser. W (1st Ser.) (exc. 2-SPD.,
H.D., H.T.) ................... E 5929/2 16 3765513 3717096 155 Ser. N w/2-SPD. (1st Ser.)........ E 35'5/6 16 3718004 158 PASS. (exc. O/D, 4-SPD., P.O.)
(white paint) .................. D 28%64 10 3750747 158 PASS. w/O/D, 4-SPD. (blue paint),64-66 Ser. 10 (115 W.B. w/4.11 ratio)
(exc. 4/WD, P.G., 283, SGL.UNIT),
64-66 Ser. 10 (SGL. UNIT) (115 W.B.w/P.G.) (exc. 4/WD)........... D 2314 10 3750746 1
58 PASS. w/P/G (orange paint)...... D 252'/64 10 3750748 159-64 PASS. w/3-SPD . ................ D 29g9/44 10 3758579 159-64 PASS. w/P.G . .................. D 2653/64 10 3758580 1
ANOTE: The above part is used as a replacement with T.G. Conversion Unit 3832566.59-64 PASS. w/O.D., 4-SPD., P/Trac.... D 245/9 10 3758581 160-62 Ser. 10-20 (127 W.B. w/P.G.) ..... E 473/8 16 3771377 160-62 Ser. 10-20 (127 W.B.) w/3-SPD.
H.D., 4-SPD . ................. E 537/ 16 3765513 3768972 160-66 Ser. 30 w/133 W.B ............... E 381 16 3765513 3768975 163-67 Ser. 10 (127 W.B. w/H.D. 3-SPD.,
4-SPD.),63-67 Ser. 20 w/4-SPD. Trans. ......... E 43!2 16 3830039 163-66 Ser. 30 w/157 W.B. (exc. T.H.),67 Ser. 30 w/157 W.B. (6 cyl.) (SGL.
SPD. 11,000 lb. Axle).......... E 61/4 16 3765513 3768976 164-66 Ser. 10 (SGL. UNIT) (115 W.B.
w/O/D) ...................... E 21"/R, 10 3865264 164-68 Ser. 10-20 (127 W.B. w/6 cyl.
(exc. 3, 4-SPD., T.H.) .......... E 3344 16 3865265 164-66 Ser. 10-20 (127 W.B. w/P.G.)
(exc. 4/WD) .................. E 331/ 16 3852318 1
5.436
4-1967Chevrolet Motor Division
860 General Motors Corporation
Support
64-66 Ser. 10 (115 W.B. w/P.G.) (exc.Type 0. L. Splines Unit Shaft
SGL. UNIT, 4/WD, 4.11 ratio) ... F 5931/44 —64-67 Ser. 10 w/115 W.B., 3-SPD. (exc. 3852338
4/WD., SGL. UNIT, H.D., 4.11ratio),,,,,,,,,,,,,,,
64-66 Ser. 10 (SGL. UNIT) w/115 W.B.,F 62s'/64 — 3852486
3-SPD. (exc. H.D., 4/WD),64-66 Ser, 10 (115 W.B.) (4.11 ratio
w/3-SPD.) (283), (exc. SGL.UNIT, 4/WD, H.D.) ............ E 241/8 1664-66 Ser. 10-20 (127 W.B., w/3-SPD.) 3852438(exc. H.D., 4/WD, Warner 3-SPD,),
67-68 Ser. 10 (127 W.B. w/3-SPD.)(250) (exc. H.D., 4/WD) ....... E 37 4344 1664-66 Ser. 20 (D-D) (125, 137 W.B. 3852316
w/P. G.) ......................64-67 Ser. 20 (D-D) (125, 137 W.B.
E 2831/32 16 3852556w /3-SPD.) (6 cyl.) ............. E 32si
8 1665-66 Ser. 10- 20 w/leaf type springs 3852557(OD) ... ........ .....
65-66 Ser. 10-20 w/leaf type springsE 393'/4 16 3877071
(P.G.) .......................66-68 Ser. 20-30 (D-D) (125, 137 W.B.
E 3616 16 3877072 1w/T.H.) ..................... E 32 1666-68 Ser. 20 w/T.H. (6 cyl.) (exc. D-D) . E 32 16
3890155 167-68 Ser. 30 (157 W.B. w/New Process 3890160 1
4-SPD.) (6 cyl.) ............... E 6021/2 1667-68 Ser. 30 (157 W.B. w/New Process 3907917 1
4-SPD.) (8 cyl.) .............. E 6414 1667 Ser. 30 w/157 W.B. (8 cyl.) (exc. 3907918 1New Process 4-SPD.).......... E 6529%ba 16
67-68 Ser. 10-10 (127 W.B. w/New 3907919 1Process 4-SPD.) (6 cyl.) ....... E 4223/4 1667 Ser. 10 (115 W.B. w/Muncie 3907966 14-SPD.) (8 cyl.) ............... E 3511/ 1667 Ser. 10 (127 W.B. w/Muncie 3907968 14-SPD.) (8 cyl.),
67 Ser. 20 (Muncie 4-SPD. w/8 cyl.) , , E 3723,64 1667 Ser. 30 w/133 W.B. (8 cyl.) (exc. 3907969 1New Process 4-SPD.) .......... E 415/8 1667 Ser. 30 w/133 W.B. (6 cyl.) (exc. 3907970 1New Process 4-SPD.) .......... E 374944 1667-68 Ser. 10 (115 W.B. w/New Process 3907971 14-SPD.) (8 cyl . ) .. E 341/8, 1667-68 Ser. 10-20 (127 W.B. w/New 3907972 1Process 4-SPD.) (8 cyl.) ....... E 46'/6 16
67-68 Ser. 30(133 W.B. w/New Process 3907973 14-SPD.) (6 cyl.) .. .. E 362'/2 16
67-68 Ser. 30 (133 W.B. w/New Process 3907974 14-SPD.) (8 cyl.),
68 Ser. 10-20 w/127 W.B. (4-SPD.w/6 cyl.) .................... E 4023/
67-68 Ser. 10 w/115 W.B. (8 cyl.) (exc. 39079754-SPD., T.H.) ................ D 233964 1067-68 Ser. 10-20 w/127 W.B. (8 cyl.) 3907979(exc. 4-SPD., T.H.) .. ..... D 3521/4 1067 Ser. 20 (D-D w/127, 139 W.B.) 3907980(PG.) .......................
67-68 Ser. 10-20 (127 W.B. w/T.H.)E 26"/,5 16 3907982
(8 cyl.) ......................67 Ser. 30 w/157 W.B. (6 cyl.) (exc.
D 36 10 3907987New Process 4-SPD.) .......... E
67 Ser. 20-30 (D-D) w/125, 137 W.B.61/32 16 3907992
(New Process 4-SPD, w/6 cyl.),68 Ser. 30 w/133 W.B. (6 cyl.) (exc.
D.D., H.D. 4-SPD., T.H.,11000 lb. axle) .............. E 3461//3 1667-68 Ser. 10 w'115 W.B. (T.H. w/6 cyl.) D 20/
391017267-68 Ser. 10 w/115 W.B. (T.H. w/8 cyl.) D 23 s%, 10 3910196
10 3910197
-1967Chevrolet Motor Division 5.436General Motors Corporation 861
SupportType 0. L. Splines Unit Shaft
67-68 Ser. 20 (127 W.B. w/T.H.) (6 cyl.) D 32/64 10 391019867 Ser. 10 (4/WD) w/127 W.B.,68 Ser. 10 (4/WD) w/127 W.B. (8 cyl.) E 4544 16 391417167 Ser. 20 (4/WD),68 Ser. 20 (4/WD) (8 cyl.) .......... E 253/4 16 391417767-68 Ser. 30 w/133 W.B. (6 cyl.) (T.H.)
(exc. D-D) .................... D 171/ 16 392119967-68 Ser. 30 w/133 W.B. (8 cyl.) (T.H.)
(exc. D-D) .................... D 215/e 16 392146067-68 Ser. 30 w/157 W.B. (6 cyl.) (T.H.)
(exc. D-D) .................... D 4115/2 16 392146167-68 Ser. 30 w/157 W.B. (8 cyl.) (T.H.)
(exc. D-D),68 Ser. 30 (D-D) w/157 W.B. (T.H.)... D 45/32 16 392146268 Ser. 10 w/115 W.B. (4-SPD. trans.
w/8 cyl.) ..................... E 32'/e 16 390790368 Ser. 20 (4/WD) (6 cyl.) ........... E 6323/32 16 392107368 Ser. 10 (4/WD) v.127 W.B. (6 cyl.) E 6415/32 16 392107468 Ser. 30 w/133 W.B. (Muncie 4-SPD.)
(8 cyl.) (exc. 11,000 lb. axle,D-D) ......................... E 281/6 16 3927901
68 Ser. 30 w/157 W.B. (Muncie 4-SPD.)(6 cyl.) (exc. 11,000 lb. axleD-D) ......................... E 48"/32 16 3927902
68 Ser. 30 w/157 W.B. (Muncie 4-SPD.)(8 cyl.) (exc. 11,000 lb. axle,D-D),
68 Ser. 10-20 w/127 W.B. (Muncie4-SPD.) (8 cyl.) ............... E 33/32 16 3927912
68 Ser. 30 (D-D) w/157 W.B. (Muncie4-SPD.) ...................... E 52(44 16 3927903
68 Ser. 30 w/157 W.B. (11,000 lb. axlew/8 cyl.) ..................... E 505', 16 3927904
68 Ser. 30 w,'157 W.B. (11,000 lb.axle w/6 cyl.) ................ E 481% 16 3927998
68 Ser. 20-30 (D-D) w/125, 133 W.B.(T.H.) ....................... D 159/32 16 3929578
68 Ser. 20 (D-D) (exc. 4-SPD. T.H.) .. D 16 16 392957968 Ser. 20-30 (D-D) w/125, 133 W.B.
(H.D. 4-SPD.) ................. D 2316 16 3929595
SHAFT, Utility, Intermediate Propeller
NOTE: (front) shown in column at right indicates part is also used as front propeller shaft.
Type O.L. Splines Shaft41-46 SBC w/195 W.B . ................ D (w/nut) 35 10 3847095 1 (front)48-53 SBC w/199 W.B ................. D (w/nut) 37',8 10 3689209 1 22.3050-53 UTILITY w/179 W.B ............. D (w/nut) 4336 10 3696326 1 23.1552-53 SBC w/212 W.B ................. D (w/nut) 507' 10 3701355 1 27.2554-55 X (1st Ser.) ..................... E 45Y 16 3707207 1 35.5054-55 Y (1st Ser.) ..................... E 4112 16 3707208 1 33.5054-55 Z (1st Ser.) ..................... E 54'4 16 3707209 1 32.2568 Ser. 20-30 (D-D) ................. D 335.6 16 3771392 1 28.25
SHAFT, Front and Front Auxilliary (4 Wheel Drive)
Type O.L. Splines Shaft57-59 Ser. 3A (transmission to transfer
case) ........................ E 1019/2 16 2352089 1 23.7557-59 Ser. 3A (transfer case to frt. axle), E 391/ — 3748907 1 38.7057-59 Ser. 3E-3G (transmission to
transfer case) ................. E 1332 16 3748902 1 37.4057-59 Ser. 3E-3G (transfer case to frt.
axle) ........................ E 4711/ 16 3748904 1 41.75
1
1
1
1
1
5.436
Y-1967Chevrolet Motor Division
862 General Motors Corporation
60-66 ALL w/4-SPD. (transmission toType O.L. Splines Shaft
transfer case) ................60-66 ALL (transfer case to frt. axle)
E 19'/ 16E 3890136 1 26.15...
61-63 4/WD (transmission to transfer 4527/3 2 16 3890148 1 41.75case) (exc. 4-SPD.) ............ F 13'/64 4/WD (exc. 4/SPD.),
— 3784785 1 20.1565-66 4/WD (transmission to transfer
case) (exc. 4-SPD.)............ F 1815/,,,Ser67-68 Ser. 10-20 4/WD( ) (aux, shaft)..... -E 19'/6 16
1 29.803907991 1 35.25
BEARING—BEARING UNIT—KIT—SUPPORT UNIT, Propeller Shaft
38-40 COMM., UTIL. (exc. '/ TON, VE,VF, WD) „ (ND 3207)
41-42 COMM., UTIL. (exc. AK, BK, YU,.... , 903207 1 3.76
MU),46-59 3
/4 , 1 TON (exc. DS, ES),48-55 UTILITY (exc. RP, SP, TP, UP,
VP) (1st Ser.),59 Ser. 3B-3E, w/H.D. 3-SPD.,
4-SPD.,60-62 Ser. 10-20 w/3-SPD. H.D., 4-SPD.,
P.G. (exc. D-D, 115 W.B.),60-62 D-D (exc. 104 W.B.),60-65 Ser. 30 (exc. D-D), front,67 Ser. 10 thru 30,63-65 D-D w/3-SPD. H.D., 4-SPD. (exc.
104 W.B.),64-65 Ser. 10 (127 W.B. w/3-SPD. H.D.,48-55 TY, UY, VY, X, Ser. 6C (1st Ser.) . inter. (single row) (1'/ x 2 2 „) ........41-47 UTIL., AN, BN, DS, ES (exc. YU, 907907 1 7.30
MU, OH, PP, QP) . • .. , . • . , .. front,42-47 MT, OG, PX, QX ................ inter. (dbl. row) (ND 5207)) 90520758-64 PASS., ......... , 1 14.0864 Ser. 10-20 (exc. D-D, 4/WD),65-68 Ser. 10-20 w/127 W.B. (2nd
design) (exc. 3-SPD. H.D.,4-SPD. Trans D-D, 4/WD),
65-68 Ser. 10 (sgl. unit) w/115 W.B.(2nd design) (exc. 3-SPD. H.D.,4-SPD. Trans. D-D,4/WD),
65-68 Ser. 10 (dbl. unit) (115 W.B.w/4.11 ratio) (2nd design)(283) (exc. 3-SPD. H.D., P.G.,4-SPD. Trans. D-D, 4/WD),
67-68 Ser. 10 w/1 15, 127 W.B. (exc.4-SPD.),
67-68 Ser. 20 (exc. 4-SPD.) ............ single prop. shaft64-65 Ser. 10-20 (1st design) (exc. 907794 1 6.844/WD, D-D) ...................
(NOTE: Unit consists of 1-907794 BearingBEARING UNIT, w /s h
ield..... . 38761311 1 7.2041-47 AN, BN, DS, ES,
Assy., and 2-3868194 shields.
41-47 UTIL. (exc. YU, MU, PH, PP, OP) KIT, support repair .................*NOTE: Used to convert single row bearing sug pport to double
*609037 1 35.50For Model usage see Prop. Shaft
row type.
Chart on preceeding pages ...... SUPPORT UNIT ..................... 3765513 1 12.00
5.437 RING, Front Propeller Shaft Bearing Lock
41-53 '/,TON....... , . ,............... snap front , , , ,42-47 BN, DS, ES ..... . 3657611 1 .20• • • • • • • .......
rowsnap, front (used w/double row brbrg.))42-47 UTIL (exc. MU, OH, PP, QP)
(inter, on MT, OG, OY, PX, XQ ).... 3675399 2 .20
5.438 SEAL—DEFLECTOR—SPACER—SHIELD, Propeller Shaft Bearing
41-42 AN, Y, BN, M (exc. YU, MU) . , , , brg. dust (jobs w/sgl. row brg.)
41 7 AN, Y, BN, M, 0, DS, P, ES, Z flange .D. x 2% O.D.) ............... 3657529 2 .45
(, Y, N, MU, OH, PP, QP) g (jobs w/dbl. row brg.)Q ) ( 1'/4 I. D. x 51/ O.D.) .............. 3678784 1 .75
x1967Chevrolet Motor Division 5.436-5.438General Motors Corporation 863
41-53 3/4 TON ......................... brg. dust (1% I.D. x 3 19/3 2 O.D.) ....... 3657612 1 .40
41-47 AN, Y, BN, M, DS, 0, P, ES, Q brg. dust (jobs w/dbl. row brg.) (1 '/4
(exc. YU, MU, OH, PP, QP) .... I. D. x 2 3/4 O.D.) .................. 3675395 2 1.30
ALLALL ........................... DEFLECTOR, brg. grease(1'„ I.D. x 2'4 O.D. x '/ thk.) ......... 3686710 1 .45
46 PX ............................ SPACER, dust seal (intermediate),46-47 DS, P, ES, Q (exc. PP, QP) ..... , dust seal (front) .................... 3684310 1 .4558-64 PASS.,64-65 Ser. 10 w/115, 127 W.B. (exc. 4/WD),64-65 Ser. 20 (exc. 4/WD, D-D) ......... SPACER, (1'/32 I.D. x 1 3 3 2 O.D.) ........ 3740096 2 .1067-68 Ser. 10-20 (4/WD) w/127 W.B.
(8 cyl.) ...................... SPACER, prop, shaft shield support ... 3931202 267-68 Ser. 10 (4/WD) w/115 W.B. (8 cyl.),67-68 Ser. 10-20 (4/WD) (6 cyl.) ........ SPACER, prop. shaft shield support .... 3931201 254-55 COMM., UTILITY (1st Ser.) w/frt.,
inter, prop shaft ............... SHIELD, brg, rear dust (21/4 I.D. x 2%
55-67 /z,'/,, 1 TON (2nd Ser.)........... O.D. -3/4 thk.) ...................... 3705198 1 .40ALLALL ........................... SHIELD, brg. dust
(1% I.D. x 4 O.D. x 2%2 thk.) ......... 3714168 1 .53
64 Ser. 10-20 (exc. 4/WD, D-D),65-68 Ser. 10 (115 W.B. w/4.11 ratio),
(exc. 4/WD, sgl. unit, H.D.3-SPD., 4-SPD., P.O.),
65-68 Ser. 10 (sgl. unit) w/115 W.B.(exc. H.D. 3-SPD., 4-SPD.,4/WD),
65-68 Ser. 10-20 w/127 W.B. (exc. H.D. SHIELD, brg dust (1',i b I.D. x 3 193 2 O.D. x
3-SPD., 4-SPD., 4/WD) ......... 1 thk.) ............................ 3868194 2 .3567-68 Ser. 10-20 (4/WD) ............... SHIELD, prop. shaft .................. 3931200 1
5.439 RETAINER—INSULATOR—CUSHION—SLINGER—FITTING, Propeller Shaft Brg.
41-47 1 TON UTIL. (exc. YU, MU, OH,PP, QP) ..................... frt. and int. (used w/dbl. row brg.).... 3682372 1 6.35
55 M, J w/cowl, H.D., 4-SPD. (2nd Ser.),55 G, K w/prop. brake (2nd Ser.),55-59 1 TON (2nd Ser.),56-59 Ser. 3B-3E w/cowl, H.D., 4-SPD.,56-59 Ser. 3D-3F w/prop. brake,60-63 Ser. 10-20 w/3-SPD. H.D., 4-SPD.,
A.T. (exc. 104, 115 W.B.),60-63 Ser. 30 (exc. 104 W.B.) ........... frt. prop. shaft and brg. supt. (73/4 O.L.)64 ALL,65-67 Ser. 10 (127 W.B. w/H.D. 3-SPD.,
4-SPD.) (exc. D-D, 4/WD),65-67 Ser. 20 w/H.D. 3-SPD.,
4-SPD. (exc. 104 W.B., 4/WD),65-67 Ser. 30 (exc. 104 W.B.),67 Ser. 10 (4/WD) w/127 W.B. (8 cyl.),67 Ser. 20 (4/WD) (8 cyl.) ........... all locations (2
14 I.D.) .............. 3714195 1 .35
41-47 1 TON, UTIL. (exc. YU, MU, OH,PP, QP) ..................... INSULATOR (3'/ 6 I.D. x 3 1
5/32 O.D.) .... 3682374* 1 .35
*NOTE: Use w/3682372 Retainer.41-53 % TON ........................ CUSHION, front (rubber-3 1 '/ 6 O.D.) , , ... 3657610 1 .8541-42 UTIL., AN, BN (exc. YU, MU),48-55 1 TON, UTIL. (1st Ser.) (exc.
RP, SP, TP, UP, VP, S),54-55 % TON (1st Ser.),55 G, K (prod.) (2nd Ser.),56-59 Ser. 3D-3F (prod.) (exc. prop. brake),60-62 Ser. 20 (D-D) w/3-SPD. (exc.
104 W.B.),63-68 Ser. 20-30 (D-D) (exc. H.D.
3-SPD., 4-SPD. 104 W.B.),67-68 Ser. 30 w/T.H. (exc. D-D) ........ CUSHION, front41-42 YT, MT,48-55 2 TON SBC, TY, UY, VY, X (1st Ser.) inter. (rubber-3'( 6 O.D.) ............. 3657524 1 .85
5.438-5.439 ©-1967Chevrolet Motor Division
864 General Motors Corporation
55 M, J w/H.D., 4-SPD. (2nd Ser.),55 G, K w/prop. brake (2nd Ser.),55-59 1 TON (2nd Ser.),56-59 Ser. 3B-3E w/H.D., 4-SPD.,60-63 Ser. 10-20 w/3-SPD. H.D., 4-SPD.,
P.G. A.T. (exc. D-D, 115 W.B.,4/WD),
60-63 Ser. 20 (D-D) w/3-SPD, H.D.,4-SPD., A.T. (exc. 104 W.B.),
60-63 Ser. 30 (exc. 104 W.B.) ........... CUSHION, front,64-67 ALL ........................... all locations (2 1
/2 I.D.) 3730827 A.R. 2.5048-55 1 TON, UTIL, (exc. RP, SP, TP,UP, VP, S) (1st Ser.),
55-59 1 TON (2nd Ser.),55-59 M, Ser. 3B (2nd Ser.),55-59 J, Ser. 3Ew/H.D., 4-SPD, (2nd Ser.),55 G, K, (Prod.) (2nd Ser.),56-59 Ser. 3D-3F,48-55 2 TON SBC, TY, UY, VY, X SLINGER, front grease,
(1st Ser.) ..................... inter. (1 2% 4 x 23/x)................. 2019793 A.R. .12
41-47 AN, BN, DS, ES ................. FITTING, front lubricating (special 4)41-47 UTIL. (exc. YU, MU, OH, PP, QP), (used with dbl. row brg.) ............ 3678785 1 .35
5.441 SHAFT, Rear Propeller (Shaft attaches to rear axle) (Also see Group 5.436)
TYPE C
TYPE E
TYPE F
38-39 PASS. .........................41-54 PASS . .........................41-46 Y TON .........................41-53 DR, 1 TON, UTILITY (exc. short
COE) ........................41-53 SHORT COE (exc. QP).......... .46-53 SHORT COE (2-SPD. w/Vac. Shift)
(exc. QP ) ....................47-53 '/, TON .........................47 QP (exc. 2-SPD.) ...............47-53 2-SPD. w/Vac. Shift (exc. short
COE) ........................tNOTE: Use with 11 leaf spring only.
48-54 '/z TON (exc. H.T.) ..............53-55 CORVETTE (6 cyl.) .............54 '/4 TON,55 '/4 TON w/H.D., H.T., 4-SPD.
(1st Ser.),55-59 J, Ser. 3E w/H.D., 4-SPD.
(2nd Ser.) ....................54-59 1 TON (exc. 4/WD),54-55 114 TON (1st Ser.) (exc. 2-SPD.)54-55 S (1st Ser.) (exc. 2-SPD.).........54-55 S w/2-SPD. (1st Ser.) ............54-55 2 TON (1st Ser.) (exc. S, 2-SPD.). .54-55 2-SPD. (1st Ser.) (exc. S) .... , , , , ,54 Yz TONw/H.T,,,,,,,,,,,,,,
x1967Chevrolet Motor DivisionGeneral Motors Corporation
Type O.L. SplinesC 591/ 10 593036 1 14.35C 63 17 3704406 1 22.80C 61Y2 17 3657323 1 18.95
E 482342 16 3657548 1 29.65E 5434 16 605409 1 20.60
E 475/6 16 609999 1 25.75E 371/, 16 3847344 1 25.00E 564 16 3847097 1 27.00
E 41'4 16 3690259t 1 24.80
C 634 17 3694764 1 24.15F 37 7
/ 6 — 3707878 1 23.50
F 36'/4 — 3707210 1 28.45
F 477/8 — 3707211 1 32.90E 551/ 16 3707199 1 27.95E 48 16 3707200 1 27.35F 471/ — 3707212 1 29.30F 401/ — 3707213 1 31.50C 575% 17 3707346 1 19.50
5.439-5.441865
Type O.L. Splines55 PASS. (1st design),57 TAXI,55-59 H, Ser. 3A (exc. H.D., 4-SPD.) .... F 547/s 3719428 1 22.2555-56 PASS. (2nd design),57 PASS. (exc. TAXI) .............. F 55% — 3722117 1 22.2555-62 CORVETTE (8 cyl.) ............. F 3435/,, — 3712381 1 23.4555 H w/H.D., 4-SPD. (1st Ser.) . , ... , E 61 °/. 16 3711310 1 30.4055 3/a TON w/3-SPD. (1st Ser.)
(exc. H.D.),55-59 J, Ser. 3E w/3-SPD. (2nd Ser.)
(exc. H.D.) ................... F 64'9/2 — 3711311 1 35.7555-59 H, Ser. 3A w/H.D., 4-S PD.
(2nd Ser.) .................... E 61 16 3719043 1 36.7555-59 M, Ser. 3B (2nd Ser.) (exc. H.D.,
4-SPD.) ...................... F 64'/6 — 3719042 1 36.7555-59 M, Ser. 3B w/H.D., 4-SPD.
(2nd Ser.) .................... F 36 1/32 — 3719044 1 34.6055-59 F, Ser. 3C w/3-SPD. (2nd Ser.)
(exc. H.D.),60 Ser. 20 (D-D) (104 W.B. w/3-SPD.)
(exc. H.D.),66 Ser. 20 (D-D) (104 W.B. w/T.H.),67 Ser. 20-30 (D-D) w/104 W.B. (T.H.) F 51', — 3717023 1 29.1555-59 F, Ser. 3C w/H.D., 4SPD.
(2nd Ser.),60 Ser. 20 (D-D) w/3-SPD. H.D.,
4-SPD. (exc. 104 W.B.),60 Ser. 30 (exc. 104 W.B., H.T.) ..... E 58'/6 16 3718008 1 29.4555-59 G, Ser. 3D (2nd Ser.),60 D-D w/125 W.B.,55-59 Ser. 30 (exc. D-D),68 Ser. 30 w/133 W.B. (11,000 lb.
axle) (exc. D-D) ............... F 44 1 3/Z — 3721462 1 28.7555-59 J, Ser. 3E w/H.T. (2nd Ser.) ...... E 62'/32 16 3718007 1 30.4055-59 K, Ser. 3F (2nd Ser.) (3" dia. tube),60 D-D w/137 W.B .................. F 56'/e — 3725032 1 33.1558-64 PASS.,64-66 Ser. 10 (SGL. UNIT) (exc. H.D.,
3-SPD., 4-SPD., 4/WD),64-65 Ser. 10 (3-SPD. w/4.11 ratio) (283)
(exc. SGL. UNIT, 4/WD. H.D.),64-66 Ser. 10 w/127 W.B. (exc. H.D.
3-SPD., 4-SPD., 4/WD),^7-bx Ser. 10 w/115, 127 W.B. (8 cyl.)
(exc. T.H., 4-SPD. trans.) ..... , F 36 1/ — 3750749 1 15.0060-62 Ser. 10 (115 W.B. w/P.G.) F 6014 — 3771388 1 23.0560-66 Ser. 10 (115 W.B. w/3-SPD. H.D.,
4-SPD.) (exc. 4/WD),65-67 Ser. 10 (115 W.B. w/Muncie
4-SPD.) (6 cyl.) (exc. 4/WD) .... E 634 16 3768971 1 44.0560-62 Ser. 10 (115 W.B. w/3-SPD.)
(exc. H.D.) (paper lined) F 55% — 3799145 1 26.5060-62 Ser. 10 (127 W.B. w/3-SPD. H.D.,
4-SPD., PG) .................. F 22 — 3768974 1 30.5060-62 Ser. 10 (127 W.B. w/3-SPD.) (exc.
H.D.) (paper lined) ............ F 68% — 3799146 1 40.6560 Ser. 20 (127 W.B. w/3-SPD., H.D.,
4-SPD., PG) .................. F 234 — 3768973 1 29.0060 Ser. 20 (127 W.B. w/3-SPD.)
(exc. H.D.) ................... F 68% — 3799649 1 37.7561-62 Ser. 20 (127 W.B. w/P.G., 3-SPD.
H.D., 4-SPD.) ................. F 242'/32 — 3782386 1 30.0061-62 D-D (104 W.B. w/3-SPD.) (exc.
H.D.),63 Ser. 20 (D-D) (104 W.B. w/3-SPD.,
P.G.) (exc. H.D.) .............. F 521743 — 3782380 1 29.0061-67 D-D (104 W.B. w/3-SPD. H.D.,
4-SPD.) (exc. 11,000 lb. axle)... E 5829/2 16 3782376 1 34.5061-62 D-D (104 W.B. w/H.T.).......... E 501/4 16 3782382 1 34.50
5.441 ©-1967Chevrolet Motor Division
866 General Motors Corporation
Type 0.L, Splines61-66 Ser. 30 (exc. D-D),61-67 D-D w/125 W.B. (exc. SGL. SPD.
11,000 lb. axle),67-68 Ser. 30 (exc. D-D, SGL. SPD.
11,000 lb. axle) ............... F 45 - 3782374 1 28.7561-67 D-D w /137 W.B. (exc. SGL. SPD.11,000 lb. axle) ............... F 56( - 3782372 1 33.1561-62 D-D (102 W.B. w/3-SPD.)(exc. H.D.) ................... F 44 - 3795472 1 21.5061-62 D-D (102 W.B. w/P.G.)........... F 465/2 - 3795473 1 21.5061-64 D-D (102 W.B. w/3-SPD. H.D.,4-S PD.),
65-67 Ser. 10 (D-D w/3-SPD. H.D.,Muncie 4-SPD.) ............... E 50/32 16 3795474 1 40.5061-62 Ser. 20 (127 W.B. w/3-SPD.) (exc.H.D., 4-SPD.) (paper lined),
63 Ser. 20 (127 W.B. w/3-SPD., P.G.)(exc. H.D., 4-SPD.) (paper lined) F 69Y - 3799147 1 39.5063-68 CORVETTE (exc. T.H.)....... .. F 3125%2 - 3830618 1 20.5563 Ser. 10 (115 W.B. w/3-S PD., P.O.)(exc. H.D.) ............... F 571/ - 3830486 1 25.6063 Ser. 10 (127 W.B. w/3-SPD., P.G.)(exc. H.D.) ................... F 693/8 - 3830485 1 39.2563-68 Ser. 10 (127 W.B. w/3-SPD.H.D., 4-SPD.),
67-68 Ser. 10 (8 cyl.) w/115 W.B.(4-SPD. trans.) (exc. 4-WD) ..... F 34u/16 - 3830189 1 31.0063 Ser. 10 (D-D) (exc. 3-SPD., H.D.,4-SPD.) ...................... F 355%4 - 3830504 1 22.2563-68 Ser. 20 (127 W.B. w/H.D. 3-SPD.) F 34% - 383006 1 31.0064-65 Ser. 20 w/127 W.B. (1st design)(exc. H.D. 3-SPD., 4-SPD., 4/WD) F 3743/44 - 3852317 1 20.8564-67 Ser. 20 (D-D) (104 W.B. w/3-SPD.)(exc. H.D.) .................. F 571366 - 3852454 1 31.1564-66 Ser. 10 (D-D) (102 W.B. w/P.G.)... F 464144 - 3852498 1 40.5064-68 Ser. 10 w/115 W.B. (exc. SGL.UNIT, 4/WD 4-SPD., T.H.) F 57% - 3865231 1 24.2564 Ser. 10 (D-D) (102 W.B. w/3-SPD.)(exc. H.D.),
64-66 Ser. 10 w/115 W.B., 3-SPD. (exc.PANEL, SUB, 4/WD, H.D. trans.,4.11 ratio),
67-68 Ser. 10 w/115 W.B. (6 cyl.) (exc.4/WD) ....................... F 62 4 - 3852486 1 35.0564-66
65G-10 ............... .......Serl 10 w/leaf type springs .......
FF
24630(4
- 3857616 1 21.15
65-66 Ser. 20 w/leaf type springs ....... F 321/2- 3877050 1 37.50
65-67 Ser. 20 w/127 W.B. (2nd design)- 3877054 1 40.50
(exc. H.D. 3-SPD., 4-SPD., 4/WD) F 36'1/6 - 3890159 1 18.9065-67 Ser. 10 (D-D) (exc. 3-SPD. H.D.,4-SPD., P.G.) ................. F 4937/44 - 3852499 1 40.5065-68 POLICE (exc. T.H.) ............. F 62%j33 - 3879720 1 52.1565-68 Ser. 10 w/127 W.B. (6 cyl.) (2nddesign) (exc. 4-SPD., T.H., 4/WD) F 3133/64 - 3904698 1 18.0065-66 PASS. (8 cyl.) (exc. T.H.),
67-68 PASS. (exc. CAPRICE, T.H.),67-68 CAPRICE (exc. A.T.) ............ F 625/32 - 38783404 1 42.8065-66 PASS. (6 cyl.) (exc. T.H.) , , , , , , , , F 62536 3881405 165 PASS. w/T.H . ............. F 61'/a
53.15
66. ...
PASS. w/T.H . .................. F 601%4- 3871141 1 45.15
67-68 CAPRICE w /P.G.. ....... F 67'325697871* 1 44.05
67-68 Ser. 10 w/115 W.B. (New Process- 3895832 1 45.00
4-SPD. w/6 cyl.) .............. E 621)6 16 3907190 1 36.5067-68 Ser. 10 (D-D) (New Process4-SPD.) ...................... E 484%4 16 3907191 1 33.7567-68 G-10 wi90 W.B .................. F 2127/32 - 3907953 1 15.5067-68 G-10-20 w/108 W.B .............. F 3927/32 3907954 1 17.25
1 -1967Chevrolet Motor Division 5.441General Motors Corporation 867
Type O.L. Splines67 Ser. 30 w/125, 157 W.B., 11,000 lb.
axle,68 Ser. 30 w/157 W.B. (11,000 lb.
axle) ........................ F 44 — 3907955 1 36.0067 Ser. 30 (D-D) w/104 W.B. (11,000
lb. axle ...................... E 5711/2 16 3907956 1 47.5067 Ser. 30 (D-D) w/137 W.B. (SGL.
SPD. 11,000 lb. axle) .......... F 5525/64 — 3907976 1 40.0067 Ser. 10 (D-D) (P.G.),68 Ser. 10 (D-D) (exc. 4-SPD.) ....... F 442'/64 — 3907981 1 39.7567 Ser. 20 (D-D) w/104 W.B. (6 cyl.)
(P.G.) ....................... F 525/2 — 3907986 1 32.7567 Ser. 20-30 (D-D) (104 W.B. w/New
Process 4-SPD.) (6 cyl.) ....... E 16 3910171 1 51.5067-68 CAPRICE w/T.H ................ F 6751/64 — 5699400 1 52.7567-68 PASS w/T.H. (exc. CAPRICE). . . F 6751/64 — 7801540 1 44.0568 CORVETTE w/T.H .......... ... F 26'/, tit — 3924148 1 69.5068 Ser. 10 w/115 W.B. (6 cyl.
w/4-SPD.) .................... — — 3927999 1 43.7568 Ser. 10 (D-D) w/4-SPD. .......... D 387/32t 16 3927900 1 40.5068 Ser. 20-30 (D-D) w/133 W.B.
(3-SPD.) ..................... 466t — 3929580 168 Ser. 20-30 (D-D) w/125 W.B.
(3-SPD,) ..................... 38?4t — 3929544 1 44.5068 Ser. 30 (D-D) w/157 W.B. (3-SPD.), 397/8t — 3929546 1 '5.00
tNOTE: Tube length.*NOTE: For U-joint repair kits use 1-5677659 (frt.) and 1-5698221 (rear).3aNOTE: All steel shaft assy. including front and rear U-joints, and trans. sleeve yoke 3868649.
SHAFT, Transfer Case to Rear Axle (4/WD)
Type O.L. Splines57-59 Ser. 3A ........................ E 3213/4 16 3748906 1 36.6557-59 Ser. 3E ........................ E 32 11/ 3748903 1 45.3557-59 Ser. 3G ........................ E 432'/2 16 3748905 1 49.7060 Ser. 10,61-63 Ser. 10 (4/WD) w/115 W.B. (1st Ser.) E 2617/32 16 3777161 1 29.3060 Ser. 20 ......................... E 40 19
/12 16 3777160 1 36.4061-63 Ser. 10 (4/WD) w/127 W.B.
(1st Ser.),,,,,,,,,,,,,,,,,,,,, E 3929 3781771 1 29.3061-66 Ser. 20 ......................... E 4047/64 16 3785334 1 37.8563-66 Ser. 10 (4/WD) w/115 W.B.
(2nd Ser.) .................... E 2933/64 16 3890146 1 28.2063-66 Ser. 10 (4/WD) w/127 W.B.
(2nd Ser.) .................... E 4133/64 16 3890147 1 29.9067-68 Ser. 10 (4/WD) w/115 W.B. ....... E 513/2 16 3907988 1 31.2567 Ser. 10 (4/WD) (w/127 W.B.),68 Ser. 10 (4/WD) w/127 W.B. (8 cyl.) F 393/ — 3914178 1 30.5067 Ser. 20 (4/WD),68 Ser. 20 (4/WD) (8 cyl.) ........... F 40 — 3914179 1 40.0068 Ser. 20 (4/WD) (6 cyl.) ........... E 5435/64 16 3921073 1 95.0068 Ser. 10 (4/WD) w/127 W.B. (6 cyl.) E 5435/6, 16 3921074 1 90.50
5.444 GUARD, Propeller Shaft
41-48 OS, ES, FS, UTILITY,49-55 1, 2 TON, SEC (1st Ser.),55-59 1 TON (2nd Ser.) ................ all locations ....................... 3798612* 1 1.85
*NOTE: On some models it will be necessary to relocate and drill new attaching holes in support,
5.446 NUT, Pinion Shaft Bearing
38-42 PASS., COMM.,46-54 PASS., '2 TON,55 ' TON (1st Ser.) ................ (15/32-20 thd.-1 thick) ............... 3703782 1 .80
5,441-5.446 1-1967Chevrolet Motor Division
868 General Motors Corporation
5.447 BEARING ASSY.-CONE-CUP, Drive Pinion-Front
38-54 PASS.,40-42 COMM.,46-54 '/2 TON,53-55 CORVETTE .................... (ND 5306W X1730A) ...............
tNOTE: Must be assembled with loading slot toward pinion gear shoulder,954780t 1 17.56
40-42 UTILITY,46-55 UTILITY (lst design),61-68 Ser. 20-30 ...................... (ND 5310 WA) (dbl. row)............. 907398 1 30.6446-60 '/a, 1 TON ..... , (HY A-305396) (305396ZD) (w/spacer) 442093* 1 40.53*NOTE: Spacer with 442093 cannot be used with any other Bearing.55-59 Y TON (exc. P/Trac.)55-64 PASS.,56-62 CORVETTE,60-62 '/, TON,63 Ser. 10 (4/WD) (1st Ser.) ......... (HY A-200267-Z) ................... 7450373 1 6.4963-68 CORVETTE,63-68 Ser. 10,64-68 G-10 (exc. 3.36 ratio),65-68 PASS. w/12 bolt ring gear),67-68 G- 20 ........................... (HY A-200248-Z) ................... 7450984 1 5.2264-68 G-10 w/3.36 ratio,65-68 PASS. w/10 bolt ring gear) ....... w/roller39-53 2-SPD ......................
...........................CONE, brg. inner, w/roller (TIM. 3875)..
7451202 A.R. 4.7539-40 1
1 4 TON ........................ CONE, brg. inner w/roller .............147905 1 6.34128257 1 (5.484)54-55 2-SPD. (1st Ser.) ................ CONE, brg. inner, w/roller (TIM.
58-59 / TON w/P/Trac.,HM801346) ........................ 455271 1 6.40
60-68 4/WD,65-66 Ser. 10 w/leaf type springs ....... CONE, brg. inner, w/roller (TIM 02872) 9412260 1 3.6264-66 G-10 w/3.36 ratio,65-66 PASS. (w/10 bolt ring gear)....... CONE39-53 2-SPD ..........................
..............................CUP, brg. outer (TIM. 3820)
7451205 1 3.42128248 154-55 2-SPD. (1st Ser.) ........... . ....
...........CUP, brg. outer (TIM. HM 801310) ......
2.68455272 1 2.8658-59 Y TON w/P/Trac.,
60-68 4/WD,65-66 Ser. 10 w/leaf type springs ....... CUP, pinion brg. outer (TIM 02820) ..... 9412261 1 1.9464-65 G-10 w/3.36 ratio,65 PASS. (w/10 bolt ring gear CUP....... ............... ................. 7451206 1 1.31
5.451 KIT-BUSHING, Propeller Shaft Bushing and Seal
38-40 ALL (exc. VE, VF, WD),41-50 PASS.,'/ TON .................. (5/6 dia.)...................... 347813 A.R. .0340-50 PASS. (1st design) (exc. P.G.). (Slip Fit Bushings) ................. 609930t 1 3.9040 COMM.,41-50 '/ TON (exc. EP) (1st design), , , , , (Slip Fit Bushings) ................. 609933t 1 3.9047 '/2 TON ....... ........... (Press Fit Bushings)............... 3847423t 1 3.9050 PASS, (2nd design) .............. (Press Fit Bushings)............... 3695678* 1 3.5550 '/z TON (2nd design) ............. (Press Fit Bushings)............... 3695031* 1 2.90tNOTE: Consists of 2 bushings, 2 dowel pins, and 1 seal.
*NOTE: Consists of 2 bushings and 1 seal.
BUSHING, Propeller Shaft Housing (torque tube)
38-39 UTILITY (exc. VE, VF).......... torque tube (1 54 6 I.D. x 1'/z long)...... 370416 1 1.3538-39 PASS., COMM .............. . rear ( 1
1/32 I.D. x 1' x
/32 O.D.)........... 595005 1 1.3538-53 3/a TON, HE, KF.... , front (1°/ 4 I.D.-no inside grooves)., , 596907 1 1.3538-40 PASS., COMM. (exc. KA, KB, KH),41-50 '/ TON (1st design) .............. front (1"/ 2 I.D. x 1 long) (slip fit) , , , , 595007 1 1.5540 PASS., COMM.,41-50 PASS., '/ TON (exc. EP)
(1st design) .................. rear (1 14 6 I.D. x 1 17/2 long) (slip fit) , . 3652328 1 1.5540-50 PASS. (1st design) .............. front (14 I.D. x 1 34 6 long) (slip fit).. , 3652601 1 1.5547 ',z TON......... , rear (1"/32 I.D. x 1"/ 6 O.D.).......... 3686064 1 1.3550 PASS. (2nd design) .............. front (1 5
/ 6 I.D. x 1 23/ 2 O.D. x 1 3 4 6 long)
(press fit) ....................... 3691484 1 1.3550 PASS., '/2 TON (2nd design)....... rear (1'1 6 I. D. x 1"/ 6 O.D. x 1'4 2 long)(press fit) .................. 3691475 1 1.35
©-1967Chevrolet Motor Division 5.447-5.451General Motors Corporation 869
50 '/ TON (2nd design) , , , , , , , , , , , , , front ( 111/32
I. D. x 1 23/32 O.D. x 1 long)(press fit) ...... , ...... , ..... 3691490 1 1.35
51-54 PASS., '4 TON .................. front ( 1 11/32 I. D. x 1 514
4 O.D. x 1 3/1 6 long)
(press fit) ....................... 3694732 1 1.9551-54 PASS., '/ TON .................. rear (1'/ 6 I. D. x 1 1% 4 O.D. x 1
7/2 long)
(press fit) ....................... 3694733 1 1.90
5.452 SCREW, Pinion Shaft Bearing Lock
38-42 PASS., COMM.,46-54 PASS., ',2 TON,53-55 CORVETTE .................... (1/ 20 x 1/,, cone point) ............ 358073 3 ,15
5.453 SLEEVE—CAGE—SPACER—WASH ER, Pinion Shaft Bearing
38-39 COMM .......................... lock (1 3/14 I.D. x 258 O.D.) ............ 374633 1 .7538-46 PASS.,40-46 COMM. (exc. DR, DS),47-54 PASS., '/2 TON,53-55 CORVETTE .................... lock (2'4 I. D. x 2'4 O.D.) ............ 3685189 1 .9946-53 2-SPD. w/Vac. Shift ............. CAGE, w/brg. cups (cast 3826-T-202)
("A" on raised ledge) ............... 3682494 1 28.2554-55 2 -SPD. (1st Ser.) ................ CAGE, w/brg. cups (cast 3826-T-202)
("XA" on raised ledge) ............. 3703732 1 28.2555-59 PASS., z TON (exc. '/Z TON w/P/
Tra c. ),56-62 CORVETTE,60-62 PASS., ';z TON,63-64 PASS.,63 Ser. 10 (4/WD) (1st Ser.) ......... SPACER (tapered-2'4 O.L.) ........... 3705722 1 .4863-66 CORVETTE,63-64 Ser. 10 ( 4/WD) (2nd Ser.),63-64 Ser. 10 (exc. 4 /WD),64-65 G-10 (exc. 3.36 ratio),65-66 Ser. 10 ......................... SPACER ( 1 5/ 6 I. D.) ................... 3817864 1 .2964-65 G-10 w/3.36 ratio,65 PASS. (3 arm suspension, w/10
bolt ring gear) ................ SPACER ( 1 15/64 I. D. x 1 348 O.D.) ......... 3849414 A.R. .2565-68 PASS. (4 arm suspension w/12
bolt ring gear) ................ SPACER (22144
O.L.) 3852983 A.R. .6366-68 G-10 w/10 bolt ring gear (3.36
ratio),
66-68 PASS. w/10 bolt ring gear ........ SPACER (1 2 Y32 O.D.-1 14 O.D.) , , , , , , , , 3880038 A.R. 58
66-68 Ser. 10,66-68 G-10 ( P/Trac. w/3.73, 4.11 ratio),67-68 G-20 ........................... SPACER ............................ 3884938 1 .6066-68 CORVETTE .................... SPACER ............................ 3885939 1 .6366-68 PASS., CORVETTE w/12 bolt
ring gear ..................... WASHER, pinion brg. spacer ........... 3886318 A.R. .2066-68 PASS., G-10 w/10 bolt ring gear .. WASHER, pinion brg. spacer ........... 3886319 A.R. .25
66 Ser. 10, G-10 w/12 bolt ring gear .. WASHER, pinion brg. spacer ........... 3888846 A.R. .20
5.457 PIN—SPRING—RIVET, Pinion to Propeller Shaft Coupling
41-54 PASS., '/2 TON .................. (244 long x s/ b dia.)................. 3657332 1 .1550-52 PASS. w/P.G.,53-54 PASS .......................... SPRING (1% free length) (41/ coils) ..... 3703792 1 .1538-40 UTILITY (exc. VE, VF, WD)...... RIVET (2'/e x'/4 dia.) .................. 370460 2 .03
5.458 SHIM, Pinion Shaft Bearing Cage
46-55 2-SPD. w/Vac. Shift (1st Ser.) .... (.003) ............................. 3682516 A.R. .35
5.451-5.458 4-967Chevrolet Motor Division
870 General Motors Corporation
5.460 SHIM-SHIM UNIT -WASHER, Pinion Shaft Bearing
38-42 PASS., COMM.,46-54 PASS., ',z TON,53-55 CORVETTE .................... (.012)............................. 3657740 A.R. .1038-42 PASS., COMM.,46-54 PASS., '/2 TON,53-55 CORVETTE .................... (,015)............................. 3657741 A.R. .1038-42 PASS., COMM.,46-54 PASS., '/ TON,53-55 CORVETTE .................... (.018)............................. 3657742 A.R. .1039-42 PASS., COMM.,46-54 PASS., ',i, TON,53-55 CORVETTE .................... (.021)............................. 3657743 A.R. .1046-60 %, 1 TON,61-68 Ser. 20-30 ...................... (.012) ............................ 3785588 A.R. .1546-60 '/,, 1 TON,61-68 Ser. 20-30 ..................... (.015) ............................. 3785589 A.R. .1546-68 '4, 1 TON ...................... (.018) ............................. 3785590 A.R. .1546-68 34 i 1 TON ..................... (.021)............ ................. 3785591 A.R. .1546-53 2 -SPD. w/Vac. Shift ............. (.157)............................. 3847424 A.R. 1.6546-53 2-SPD. w/Vac. Shift ............. ( . 159)............................. 3847425 A.R. 1.6546-53 2 -SPD. w/Vac. Shift ............. (.163)............................. 3847426 A.R. 1.6546-53 2 -SPD. w/Vac. Shift ............. (.167)............................. 3847427 A.R. 1.6546-53 2 -SPD. w/Vac. Shift ............. ( . 171)............................. 3847428 A.R. 1.6554-55 2 -SPD. w/Vac. Shift (1st Ser.) .... ( . 188) ............................. 3707323 A.R. 1.7054-55 2 -SPD. w/Vac. Shift (1st Ser.) .... ( . 190) ............................. 3707324 A.R.54-55 2 -SPD. w/Vac. Shift (1st Ser.) ... ( , 194) ............................. 3707325 A.R.
1.701.70
54-55 2 -SPD. w/Vac. Shift (1st Ser.) .... ( .202) ............................. 3707327 A.R. 1.7054-55 2 -SPD. w/Vac. Shift (1st Ser.) .... (.206)......... , ........... 3707328 A.R. 1.7055-56 PASS., '/2 TON,56 CORVETTE .................... (.021)............................. 3708823 A.R. .1055-56 PASS., '4 TON,56 CORVETTE .................... (.024)............................. 3708824 A.R. .1055-56 PASS., '/, TON,56 CORVETTE .. .................. (.030)............................. 3708826 A.R. .1055-56 PASS., 14 TON,56 CORVETTE .................... (. 033)............................. 3708827 A.R. .1055-56 PASS., '/2 TON,56 CORVETTE .................... (.036) 3708828 A.R. .1058-59 'z TON w/P/Trac.,60-68 4 /WD .......................... front axle brg. adj. (.003-144 O.D.)65-67 Ser. 10 w/leaf type spring ........ pin brg. adj ................. . ...... 2346830 A.R. .1058-59 !-2 TON w 'P/Trac ................ front,60-68 4/WD .......................... frt. axle brg. adj. (.005-1 3/4 O.D.),65-67 Ser. 10 w/leaf type spring ........ pin brg. adj ........................ 2346831 A.R. .1058-59
' /2 TON w/P/Trac ................ drive pinion adj. (.003).............. 1784576 A.R. .1258-59 '/2 TON w/P/Trac ................ drive pinion adj. (.005).............. 1784577 A.R. .1258-59 'z TON w/P/Trac . ............. drive pinion adj. (.010). .. . . . . . . . ... 1784578 A.R. .1260-68 Ser. 20-30 ...................... (.024) ............................. 3785592 A.R. .1560-68 4/WD .......................... frt. axle, brg. adj. (.003-2 63/64 O.D.),65-67 Ser. 10 w/leaf type springs ....... pinion brg. adj . .................... 2402522 A.R. .1060-68 4/WD .......................... frt. axle, brg. adj. (.005-2 67/ 4 O.D.),65-67 Ser. 10 w/leaf type springs ....... pinion brg. adj . .................... 2402523 A.R. .1060-68 4/WD .......................... frt. axle, brg. adj. (.010-2 63/ 4 O.D.),65-67 Ser. 10 w/leaf type springs ....... pinion brg. adj . ............ . ....... 2402524 A.R. .1065-66 Ser. 20 w/leaf type spring........ (.003) ............................. 2353010 A.R. .1065-66 Ser. 20 w /leaf type spring........ (.005) ............................. 2353011• A.R. .1065-66 Ser. 20 w /leaf type spring........ (.010) ............................. 23530120 A.R. .1065-66 Ser. 20 w /leaf type spring........ (.030) ............................. 2353013/0 A.R. .1065-66 Ser. 20 w /leaf type spring........ (.003) ............................. 2358870* A.R. .1065-66 Ser. 20 w /leaf type spring........ (.005) ............................. 23588710 A.R. .1065-66 Ser. 20 w /leaf type spring........ (,010) ............................. 2358872• A.R. .1057-59 PASS., CORVETTE, Ser. 3A
(exc. !2 TON w/P/Trac.),60-62 PASS., CORVETTE, '/ TON,63-64 PASS., ',Z TON,65-68 PASS. (w/10 bolt ring gear),65-68 Ser. 10, G-10-20 ................. SHIM UNIT (.021-.026) (2 g
44 O.D. x1 2944 I. D.) ......................... 3893584 A.R. .60
1967Chevrolet Motor Division 5.460General Motors Corporation 871
39-40 VF, WD w%2-SPD.,41-55 2-SPD. (1st Ser.) ................ SEAL, pinion flange oil (2 1/4 I.D.)....... 365149340-42 WD, Y, M (exc. 2-SPD.),46-55 COMM., UTIL. (1st Ser.) (exc. YZ
TON, 2-SPD.),55-66 34, 1 TON (2 Ser.),66-68 Ser. 2030. ...................... SEAL, pinion flange oil ............... 387952741-42 COMM. (exc. YZ TON) ............ SEAL, pinion flange oil (1 37/64 I. D. x
2"42 O.D.) .......... ............. 370579651-54 PASS., '/ TON .................. SEAL, torque tube oil (1'/ 6 I.D. x 123/2
O.D.) ............................. 3694736
1 3.70
1 2.50
1 (5.822)
1 1.20
i/-1967Chevrolet Motor Division
General Motors Corporation
5.460-5.469
872
57-59 PASS., CORVETTE, Ser. 3A(exc. 4 TON w/P/Trac.),
60-62 PASS., CORVETTE, YZ TON,63-64 PASS., '/Z TON,65-68 PASS. (w/10 bolt ring gear),65-68 Ser. 10, G-10-20 ................. SHIM UNIT (.027-.032) (2°% 4 O.D. x
129/64 I. D.) ......................... 3893585 A.R. .6057-59 PASS., CORVETTE, Ser 3A
(exc. 14 TON w/P/Trac.),60-62 PASS., CORVETTE, '/ TON,63-64 PASS., 4 TON,65-68 PASS. (w/10 bolt ring gear),65-68 Ser. 10, G-10-20 ................. SHIM UNIT (.033-.037) (2% 4 O.D. x
124. I. D.) ......................... 3893583 A.R. .5063-68 CORVETTE,65-68 PASS. w/12 bolt ring gear ........ SHIM UNIT (.021-.026) (2
24/64 O.D. x
1 4 164 I.D.) ......................... 3893582 A.R. .6063-68 CORVETTE,65-68 PASS. w/12 bolt ring gear ........ SHIM UNIT (.027-.032) (2' 4
4, O.D. x14144 I. D.) ......................... 3893587 A.R. .60
63-68 CORVETTE,65-68 PASS. w/12 bolt ring gear ........ SHIM UNIT (.033-.037) (2 24/64 O.D. x
1^4 4 I.D.) ......................... 3893586 A.R. .5046-55 2-SPD. w/Vac. Shift (1st Ser.) , , , WASHER, brg. (2'/4 O.D.-54 thick) ...... 690555 2 .60
5.461 PINION, Double Reduction
46-55 2-SPD. w/Vac. Shift (1st Ser.) .... high spd. (15T stamped 3891-L-636).. 3777487 1 39.4546-55 2-SPD. w/Vac. Shift (1st Ser.) ... , low spd. (11T stamped 3891-K-635)... 3682539 1 37.00
5.462 RACE—COVER—COVER ASSY.—BOLT, Double Reduction Pinion
39-55 2-SPD. (1st Ser.) ................ outer (TIM. 59412) .................. 173105 2 5.3039-55 2-SPD. (1st Ser.) ................ inner w/roller, right (TIM. 59200) ..... 173106 1 10.9546-55 2-SPD. w/Vac. Shift (1st Ser.) .... inner w/roller, left (TIM. 59162)...... 436041 1 11.1046-55 2-SPD. w/Vac. Shift (1st Ser.) .... COVER, right (6- 35/64 holes) ........... 3686574 1 4.7546-55 2-SPD. w/Vac. Shift (1st Ser.) .... COVER ASSY. w/Cup (cast 3838-J-114). 3682496 1 16.7539-55 2-SPD. (1st Ser.) ................ BOLT, cover to diff. carrier ( 1/- 13 x 1
14) 427566 A.R.(8.900)
5.464 SHIM, Double Reduction Pinion Bearing Cove r
46-55 2-SPD. w/Vac. Shift (1st Ser.) .... left (.003) (4"/ 6 I.D.) ............... 3682499 A.R. .3046-55 2-SPD. w/Vac. Shift (1st Ser.) .... right (.003) (4 13/ 6
I. B.) .............. 3682500 A.R. .30
5.469 PACKING—SEAL, Drive Pinion
40-42 WD, Y, M (exc. 2-SPD.),46-55 COMM., UTIL. (1st Ser.) (exc.
'/z TON 2-SPD.),55-65 34, 1 TON (2nd Ser.) ............. brg. retainer (felt 2°/ 6 I.D. x 3'/2 O.D.). 3653617 1 5538-50 PASS.,40 COMM.,41-50 ',Z TON (exc. EP) ................ SEAL, torque tube oil (1'/32 I.D. x 111/6
O.D.) ............................. 3691457 1 1.20
53-55 CORVETTE , , , , , , , , , , , , , , , , , , , , SEAL, pinion flange oil (1'/ I.D. x 3'/6O.D.) ............................. 3707355 1 2.05
55-59 PASS., '/z TON (exc. '/ TONw/P/Trac.,),
56-59 CORVETTE,60-62 PASS., CORVETTE, '/2 TON,63-64 PASS.,63 Ser. 10 (4/WD) (1st Ser.) ......... SEAL, pinion flange oil (3 5/„ O.D.) ..... 3865358 1 1.9058-59 12 TON w/P/Trac ................ SEAL, pinion flange, oil,60-68 4/WD .......................... frt. axle pinion flange oil,65-67 Ser. 10 w/leaf type springs ....... pinion flange oil, rear (1'4 I. D. x
O.D.) (Dana 14223-3) ............... 409235 1 1.5563-68 CORVETTE,67-68 Ser. 10,64-68 G-10 (exc. 3.36 ratio),65-68 PASS. w/12 bolt ring gear,67-68 G-20 ........................... SEAL, pinion flange oil ............... 3852984 1 1.6063-66 Ser. 10 ......................... SEAL, pinion flange oil ............... 3817883 164-68 G-10 w/3.36 ratio ............... SEAL, pinion flange oil65-68 PASS. w/10 bolt ring gear ....... (1 /94 I. D. x 2 21/,,, O.D.) .............. 3832368 1 1.5565-66 Ser. 20 w/leaf type spring ........ SEAL, pinion flange oil (1'B I.D. x 31164
O.D.) (Dana 32955-1) ............... 2469341• 1 1.70
5.476 RETAINER—B OLT—GASKET, Pinion Bearing and Oil Seal
40 WD (exc. 2-SPD),41-55 UTILITY (prod) (1st Ser.)........ (cast 3653616) ..................... 3653616 1 2.4546-60 3/4 , 1 TON ...................... (cast 3682199) ..................... 3682199 1 2.4561-65 Ser. 20-30 ...................... .................................... 3766680 1 2.3566-68 Ser. 20-30 (exc. 11,000 lb. axle) ... .................................... 3883354 1 2.6567-68 Ser. 30w/11,000 lb. axle ......... .................................... 3880666 1 4.7546-55 UTILITY (1st Ser.) .............. BOLT, retainer (%-11 x 1/a)........... 370457 6 (5.387)39-55 2-SPD. (1st Ser.) .. . . . . . . . . . . . . . . BOLT, brg. case to diff. carr. (/ 6 -12 x
1'/a) ............................... 444470 6 (8.900)46-60 3
/4 , 1 TON ...................... BOLT, attaching ('/-13 x 1 1546 ) 3758226 A.R. .20
40-55 UTILITY (prod.) (1st Ser.)........ GASKET, retainer (paper) ............. 3652257 1 .0646-60 34, 1 TON ...................... GASKET, retainer (4 34 I.D. w/5—"/ 2
holes) ............................ 3682147 1 .2558-59 '2 TON w/P/Trac ................ GASKET, retainer (paper-2 3
4 I.D. x 39464O.D.)
60-68 4/WD,65-67 Ser. 10-20 w/leaf type springs .... (used on front on 4/WD) (Dana 30188) , 2346835 1 .1061-68 Ser. 20-30 (exc. 11,000 lb. axle) ... GASKET, retainer .................... 3883369 1 .2567-68 Ser. 30 11,000 lb. axle ........... GASKET, pinion oil seal and bearing
retainer ........................... 3880672 1 .50
5.478 GEAR UNIT, Double Reduction, w/Pinion
39-46 2-SPD. w/Mech. Shift............ low speed double reduction (37T-11T)(stamped 3891-J-608 and 3892-H-788) ............................ 3847024 1 62.85
39-46 2-SPD. w/Mech. Shift............ high spd. dbl. reduction (33T-13T)(stamped 3892-Y-831 and 3891-F-604) ............................ 3847040 1 59.10
46-55 2-SPD. w/Vac. Shift (1st Ser.) . , .. low speed double reduction (31T-11T)(stamped 3891-K-635 and 3892-B-886) ............................ 3847053 1 90.10
46-55 2-SPD. w/Vac. Shift (1st Ser.) , .. , high speed double reduction (32T-15T)(stamped 3892-C-887 and 3891-L-636) ............................ 3847052 1 90.10
5.479 BOLT, Double Reduction Pinion Gear
46-55 2-SPD. w/Vac. Shift (1st Ser.) . , .. (spec. hex. hd. 9/,o-18x2'% drilled).. , , 3682519 8 .45
5.481 SHAFT—WASHER, Double Reduction Pin i on
46-55 2-SPD. w/Vac. Shift (1st Ser.) .... (14T -103/, long) .................... 3682536 1 39.5546-55 2-SPD. w/Vac. Shift (1st Ser.) ... , WASHER, pinion bearing .............. 690555 2 (5.460)
C-19675.469-5.481Chevrolet Motor Division
General Motors Corporation 873
5.484 BEARING ASSY.-CONE-CUP-RACE-SLING ER, Drive Pinion Rear
38-42 PASS., COMM.,46-54 PASS., '/ TON,53-55 CORVETTE .................... (Hyatt OR 1506) .................... 125630 1 10.8640-55 UTILITY (prodl) (1st Ser.) (exc.
2-SPD.),67-68 Ser. 30 w/11,000 lb. axle ......... (Hyatt U 1306) (HT 1306 TA) ........ 144553 1 12.3146-60 3 , 1 TON ...................... (Hyatt UC-5205-TM) ................ 189436 1 9.7155-59
14 TON (exc. P/Trac.),
55-64 PASS.,56-62 CORVETTE,60-68 Ser. 10,64-68 G-10-20,65-68 PASS. w/10 bolt ring gear ........ (Hyatt HM89449-HM89410) ........... 7450371 1 6.5663-68 CORVETTE,65-68 PASS. w/12 bolt ring gear ........ .................................... 7451155 1 9.1463 Ser. 20-30 (exc. 4/WD),63 Ser. 20 (4/WD) (2nd Ser.) ......... .................................. . 7451118 1 12.83
Not required in this group. Seegrou p
4. 355 ................... .................................... 7451203 1 5.9439-46 2-SPD. w,'Mech. Shift ............ CONE, roller bearing (TIM. 455) ........ 115267 1 7.5246-53 2-SPD. w/Vac. Shift ............. CONE, w/roller, brg. inner (TIM. 49585) . 189638 1 9.0254-55 2-SPD. w/Vac. Shift (1st Ser.) .... CONE, w/roller, brg. inner (TIM. HM
807046) ........................... 454020 1 12.3558-59 '/2 TON w/P/Trac ................ CONE, brg. inner w/roller............. 128257 1 6.0063-66 CORVETTE,65-66 PASS . ......................... CONE, rear brg. inner w/roller ......... 7451157 1 5.61.46-53 2-SPD. w/Vac. Shift ............. CUP, bearing outer (TIM. M 49520) , , , , , 457346 1 4.7454-55 2-SPD. w/Vac. Shift (1st Ser.) .... CUP, brg. outer (TIM. HM 807010) ...... 457342 1 5.7258-59 '/,TON w/P/Trac ................ CUP, rear brg. outer (TIM. 3820) ....... 128248 1 (5.447)60-68 Ser. 20-30 ...................... CUP, w/outer race and roller .......... 7451686 1 6.5163-66 CORVETTE,65-66 PASS . ......................... CUP, rear brg. outer .................. 7451156 1 3.5360-68 4/WD,65-67 Ser. 10 w/leaf type springs . , , .... RACE, forward brg. cup (timken 31520).. 187232 1 2.3660-68 4/WD .......................... RACE, forward brg., inner w/roller65-67 Ser. 10 w/leaf type springs ....... ( Timken 31594) .................... 9415227 1 4.1260-68 4/WD .......................... SLINGER, rr. pinion brg. oil (14 6 I. D. x
4% O.D.) .......................... 2403666 1 .15
5 .489 RING, Pinion Shaft Rear Bearing Lock
38-39 UTILITY,46-60 '/„ 1 TON ......................38-42 PASS., COMM.,46-54 PASS., '/ TON,53-55 CORVETTE ....................40-55 UTILITY (prod.) (1st Ser.),67-68 Ser. 30 w/11,000 lb. axle .........
('/s I.D. x 5/ 4
wire diameter).......... 370464 1 .05
(1' 1/ 6 I.D. x'/ wire diameter)......... 377722 1 .06
front and rear (1 54 4 I.D. x '/8 wire dia.) , 3652256 1 .05
5.490 YOKE, Double Reduction Shifter
46-55 2-SPD. w/Vac. Shift (1st Ser.) .... (6164 dia. hole) ..................... 2212947 1 12.50
5.492 SLEEVE-SCREW-SPRING-PIN, Double Reduction Shifter
39-46 2-SPD. w/Mech. Shift ............ (28 teeth) ......................... 3651442 1 12.7046-55 2-SPD. w/Vac. Shift1st Ser.) ...( ) teeth)(14 teeth .......... ........... 3682528 1 15.7546-55 2-SPD. w/Vac. Shift (1st Ser.) .... SCREW, yoke (/ 6 -20 x 1"4 2 ) , , , , , , , , , , 2212950 1 .3039-55 2-SPD. (1st Ser.) ................ SPRING, sleeve lock ................. 2169421 3 .0642-55 2-SPD. (1st Ser.) ............... PIN, sleeve lock ..................... 2169420 3 .21
5.500 BRACKET _ CUSHION-WAS HER, Differential Carrier Mounting
63-68 CORVETTE (exc. T.H.) .......... .................................... 3868799 1 2.5968 CORVETTE w/T.H . ............ .................................... 3921657 1 3.2563-68 CORVETTE .................... CUSHION, front lower ................. 3795333 1 (9.023)
5.484-5.500
O-I967Chevrolet Motor Division
874 General Motors Corporation
63-68 CORVETTE .................... CUSHION, front upper ................. 3788637 1 (9.023)63-68 CORVETTE .................... WASHER, front ( 15/32
I.D. x 1'/4 O.D. xthk.) ............................ 3790768 1 (8.154)
5.504 CARRIER ASSEMBLY, Differential w/Propeller Shaft Tube
48-55 '/ TON (1st Ser.) (exc. H.T.).. , .. , w/adjusting nuts (cast 3698954)(tube 60'/8 long to carrier).......... 37104031 1 50.30
tNOTE: On models prior to 1951 it is necessary to use 3694732 front, 3694733 rearbushings and 3694736 seal assy.
5.505 CARRIER ASSEMBLY, Differential, w/Cap
40-42 UTILITY (exc. H.D.),46-55 1 1 TON (1st Ser.) ............... (cast 3652280) ..................... 604472 1 40.1541-42 UTILITY w/H.D.,46-53 2 TON ......................... (cast 3661871) ..................... 605925 1 61.9046-60 %, 1 TON ...................... (cast 3699535) ..................... 3699534 1 36.2546-55 2-SPD. w/Vac. Shift (1st Ser.) .... (5800-M-429 or 3 8
00-N-430).......... 3682531 1 82.8054-55 2 TON (1st Ser.) (prod.).......... (cast 3702281) (6-37 teeth) .......... 3702284 1 60.3055-64 PASS.,56-62 CORVETTE .................... .................................... 3789870 1 27.3055-57 '/2 TON,58-59 '/z TON (exc. P/Trac.),60-62 Ser. 10,63 Ser. 10 (4/WD) (1st Ser.) ......... (cast 3707340) ..................... 3718011* 1 34.95
*NOTE: Also used on front axle on 1957 thru 1959.61-65 Ser. 20-30 ...................... .................................... 3766685 1 36.2563-66 CORVETTE .................... .................................... 3876475t 1 32.25
¶NOTE: When using 3876475 in place of 3822962, the carrier mounting bracketnuts and bolts should be discarded and replaced by 2 of 3846867 boltand 3774712 nut, and 1 of 103374 cotter pin.
67-68 CORVETTE .................... .................................... 3917861 1 32.2566-68 Ser. 20-30 (exc. 11,000 lb. axle) ... .................................... 3883378 1 36.2567-68 Ser. 30w/11,000 lb. axle ......... .................................... 3880668 1 85.10
C ARRIER A SS Y., Differential (Positraction) (Co mplete w/Ring Gear and Pinion)
57-62 CORVETTE,59-64 PASS .......................... (3.70 Ratio)....................... 3743966 1 127.4057-62 CORVETTE,62-64 PASS . ......................... (4.56 Ratio)....................... 3743970 1 127.4058-59 PASS.,58-62 CORVETTE,62-64 PASS .......................... (4.11 Ratio)....................... 3748977 1 127.4063-66 CORVETTE (exc. Sp. H/Per,
396, 427) ..................... (3.70 ratio) ........................ 3880129 1 188.3563-65 CORVETTE .................... (4.11 ratio) ........................ 3876471 1 199.5065-66 CORVETTE (exc. 427) ........... (4.11 ratio) ........................ 3880131 1 188.3565 CORVETTE (exc. Sp. H/Per., 396) (4.56 ratio) ........................ 3876473 1 187.8566 CORVETTE .................... (4.56 ratio) ........................ 3894565 1 188.3567-68 CORVETTE .................... (3.70 ratio) ........................ 3899137 1 199.5067-68 CORVETTE ................... (4.56 ratio) ........................ 3899141 1 199.5067-68 CORVETTE .................... (4.11 ratio) ........................ 3899139 1 199.50
CARRIER ASSY., Differential (exc. Positraction) (Complete w/Ring and Pinion)
59-64 PASS.,62 CORVETTE .................... (3.08 ratio) ........................ 3758046 1 90.1567 Ser. 30 (D-D) ................... (5.43:1 ratio) ...................... 3880664• 1 265.0067-68 Ser. 30 w/11,000 lb. axle ......... (6.17:1 ratio) ...................... 3880663• 1 265.00
5.506 SCREW-BOLT-DOWEL, Differential Carrier Cap
40-42 COMM.,46-59 '/z TON (exc. P/Trac.),57-59 Ser. 3A w/4/WD,60-62 Ser. 10,63 Ser. 10 (4/WD) (1st. Ser.) ........ (°( -12 x 2'/) ... ................... 3652346 4 .20
r 1967Chevrolet Motor Division 5.500-5.506General Motors Corporation 875
57-64 ...............................57-64 ...............................65-68 .... ------
65-68
65-68
66-6868 ..................... .
(NOTE: Use with 10 bolt ring gear.rNOTE: Use with 12 bolt ring gear.
80.50
80.5075.5577.75
80.5080.50
67.75
65.70
69.75
69.7567.75
46-66 3/4 , 1 TON,57-59 Ser. 3G (PANEL) w/4/WD65-68 Ser. 20-30 (exc. 11,000 lb. axle) ... (46-12 x 3'/e) ...................... 3682128 4 .3046-55 2-SPD. w/Vac. Shift (1st Ser.) .... ( /e -11 x 33/e) • • • • • • • • • • .. • • • ....... 3691473 4 .3555-64 PASS.,56-62 CORVETTE ................... (1/2 -13 x 2^/4 ) (280-M) ............... 3705721 4 .1563-68 CORVETTE, Ser. 10 (exc. 4/WD),63 Ser. 20 (exc. 4/WD, D-D),64-68 G-10-20,65-68 PASS . ......................... BOLT .............................. 3818764 4 .1540-55 UTILITY (prod.) (1st Ser.),67-68 Ser. 30 w/11,000 lb. axle ......... BOLT, bearing ( -11 x 3 3,) ......... 3705826 4 .55
Not required in this group. Seegroup 5.383 ................... BOLT .............................. 2270887 .71
40-55 UTILITY (1st Ser.),67-68 Ser. 30 w/11,000 lb. axle ........ DOWEL ............................. 3652274 4 .2046-66 'i4, 1 TON,67-68 Ser. 20-30 (exc. 11,000 lb. axle) ... DOWEL ............................. 3682129 4 .20
5.508 GASKET, Axle Housing to Differential Carrier (pa p er)
38-54 PASS.,53-55 CORVETTE .................... (9% x 10%) ........................ 593012 138-42 COMM.,46-59 '/ TON (exc. P/Trac.),60-62 Ser, 10,
24
63 Ser. 10 (4/WD) (1st Series) ....... (10% O.D. x 9'/ I.D.) (10 holes)...... 37024639-55 2-SPD. (1st Ser.) ............... (141/4 O.D. x 12%2I.D.).............. 365136540-55 UTILITY (prod.) (1st Ser.),67-68 Ser. 30 w/11,000 lb. axle ....... (1329/33 O.D. x 11% I.D.) ............. 3652258
46-66 3/4 , 1 TON,67-68 Ser. 20-30 (exc. 11,000 lb. axle) ... (12Y4O.D. x 10% 2
I. D. ) ............... 366560755-64 PASS.,56-62 CORVETTE ................... (913/1 x 11%) ....................... 376987063-68 CORVETTE ................... (9%4 x 10) ......................... 3818793
5.510 CASE -CASE UNIT - BOLT, Differential and Planet
NOTE: Differential case halves are not sold separately.♦ANOTE: Indicates repeated number; see first listing for price.
D i fferent i a l Assy. (C a s e w / inte rnal gears)
1 .251 .25
1 .25
1 .25
1 .431 .24
CORVETTE w/P/Trac.
57-62 ............................... w/4.11, 4.56 ratio.................. 385355261-62 ............................... w/3.36, 3.55, 3.70 ratio............. 385355063-68 ............................... w/2.73,3.08,3.36,3.55, 3.70 ratio ... 386341563-68 ............................... w/4.11, 4.56 ratio (Eaton 12363-2).... 3863417
PA SSENGER w/P /Trac.
(exc. 4.11, 4.56 ratio) ............... 3853550 1w/4.11, 4.56 ratio .................. 3853552 1w/3.08, 3.36, 3.55, 3.70 ratio (Eaton
11171-2) ........................ 3887368( 1w/3.07, 3.31, 3.55, 3.73 ratio (Eaton
12666-4) ....................... 3887369 1 T 1w/4.10, 4.56, 4.88 ratio (EatonED12666-5) .................... 3887370 1
w/2.73 ratio (Eaton 12666-6) ........ 3887371 1w/2.56, 2.73 (Eaton 11171-3) ........ 3910824( 1
TRUCK w/P/Trac.
60-62 Ser. 10 ......................... .................................... 3825863 1 102.5063 Ser. 10 w/3.73 .................. .................................... 3826398 1 83.0064 G-10 w/3.36 .................... (Dana 23619X) ..................... 3858916 1 77.75
5.506-5.510 -1967876 Chevrolet Motor Division
General Motors Corporation
64 G-10, Ser. 10 w/3.73 ............. (Dana 23 650X)..................... 3857945 1 83.0065-66 Ser. 10 (D-D) w/3.73,65-66 Ser. 10, G-10 w/3.73, 4.11........ (Eaton ED 11172-1) ................. 3866106 1 69.7565-68 G-10 w/3.36 ratio ............... (Eaton 11171-2). . 3887368 1 67.75..................67-68 Ser. 10 w/3.73, 4.11,67-68 G-10-20 w/3.73, 4.11 ............ (Eaton EO 11172-2) ................. 3894428 1 69.75
Differential Case (Case less internal gears )
38-52 PASS. (exc. P.G.),53 SDL . .......................... (cast 593009) ...................... 593009 1 15.6040-42 COMM.,46-53 ' TON,55-57 '/ TON w/O/D,60-62 Ser. 10 w/4.11 ratio (exc. max.
econ. equip.) ................. (cast'3652336)(daub of orange paint) . 3867833 1 16.2040-42 UTILITY (exc. H.D., 2-SPD.),42-53 UTILITY,54-55 1'/2 TON (1st Ser.) (exc. 2-SPD.),67-68 Ser. 30 w/11,000 lb. axle ......... w/cover (cast 3 661 872-73). . . . . . 605922* 1 35.3546-66 ;, 1 TON,
.. . . .
67-68 Ser. 20-30 (exc. 11,000 lb. axle) ... (cast 3664592-93)) .................. 609803* 1 23.30*NOTE: Bolts holding case together to be discarded when installing.
46-53 2-SPD. w/Vac. Shift ............. (stamped 3835-C-263)(A20-3835-D-264) ................. 610000t 1 48.75
tNOTE: Ream holes after gear assembly. See Truck Shop Manual, Section 4.50-52 PASS. w/P.G.,53 PASS. (exc. SDL.),54 PASS.,53-55 CORVETTE .................... (cast 593009) (identified by blue paint) 3691463 1 14.9054-55 2 TON (1st Ser.) (exc. H.D., 2 spd.) (cast 3702226) ..................... 3707515 1 50.1054-55 2-SPD. w/Vac. Shift (1st Ser.) .... (cast 3703727) ..................... 3707538 1 52.5055-56 PASS. (exc. O/D),56 CORVETTE (exc. 4.11 ratio) ..... (cast 3707311) ..................... 3707311 1 14.9055-59 PASS. w/O.D. (exc. P/Trac.),56 CORVETTE w/4.11 ratio (exc.
P/Trac.) ..................... w/thrust washer.................... 3885292 1 13.9057-62 CORVETTE (exc. P/Trac.),57-59 PASS. (1st design) (exc.
O/D, P/Trac.),59-64 PASS. (2nd design) (exc. P/Trac.)57
.PASS. w/P/Trac. (O.D.),
.................................... 3867386 1 15.25
57-62 CORVETTE w/P/Trac. (4.11,4.56 ratio),
58-59 PASS. w/P/Trac. (O/D w/4.11),63-64 PASS. w/4.11, 4.56 ratio ......... (Dana 22212X) ..................... 3777724 1 59.7558-59 '2 TON w/P/Trac. (3.92 ratio) .... w/cover........... 238806623 1 52.50
®NOTE: Includes 2 extra 534935 Plates for replacing early design cases which had 4 platesand now utilize 6.
57-64 PASS. w/P/Trac. (exc. 4.11,4.56 ratio),
57-62 CORVETTE w/P/Trac. (3.36, 3.55,3.70 ratio) .................... w/cover (Dana 22211X) ............. 3777659 1 59.7560-62 4/WD,
63 Ser. 20 (4/WD),63 Ser. 10 (4/WD) (1st Ser.) ......... front axle (Dana 31441) 2402528 1 17.5054-62 'z TON (exc. O/D, P/Trac.),63 Ser, 10 (4/WD) (1st Ser.) ......... w/side gear thrust washer. . . . . . . . . . 3867832 1 15.603-665 CORVETTE (exc. P/Trac.)63-64
,,, , , ,CORVETTE w/P/Trac. (4.11,
, , , , , , , , , , , , ,,, 3845299 1 15.60
4.56 ratio) .................... (Dana 32976) (cast C 32459) ......... 3865297 1 31.5063-64 CORVETTE w/P.Trac. (exc.4.11, 4.56 ratio) ............... (Dana 32975) ...................... 3865296 1 30.1063-68 Ser. 10 (3.07 ratio) (exc. D-D)
**NOTE:.................. , .......
When using 3846423 on 1963 models it will be3865968 1 16.50
3846425 differential side gearnecessary to use two
washers.63 Ser. 10 w/P/Trac., (3.73 ratio).... (Eaton 30060) 3830668 1 38.8563 Ser. 10 (4/WD) (2nd Ser.) .. , .. front axle (Dana 31433) ............. 2402526 1 17.5063-68 Ser. 10 (exc. P/Trac., 3.07 ratio),64-68 G-10 (exc. P/Trac., 3.07 ratio),67-68 G-20 (exc. P/Trac.) ............. rear axle w/washers
................ 3863182 1 17.25
©-1967Chevrolet Motor Division 5.510General Motors Corporation 877
64 Ser. 10, G-10 w/P/Trac.,65-66 Ser. 10 w/P/Trac. (exc. 4/ WD,
leaf type springs),65-66 G-10 w/P/ Trac. (3.73, 4.11 ratio),67 Ser. 10 (4/WD) w/P/Trac. ........ (Dana 33284) ..................... . 2475248* 1 40.45
*NOTE: When using 2475248 in place of 3849914 pinion shaft 3869308 must alsobe used.
64-68 Ser. 20 (4/WD),65-67 Ser. 20 w, /leaf type springs ....... front axle (Dana 32684) ............. 2457067 1 18.5064-68 CORVETTE w/P/Trac., (4.11,
4.56 ratio) .................... (Eaton 30175) ...................... 3869343 1 36.1564-68 CORVETTE w/P/Trac., (3.08,
3.36, 3.55, 3.70) .............. (Eaton 30117).,.................... 3869314 1 35.1565-68 G-10 w/3.36 ratio (exc. P/Trac.),65-68 PASS. (3.08, 3.36, 3.55, 3.70
ratio) (exc. P/Trac.) , , , , , , , , , , , w/10 bolt ring gear ................. 3878439 1 15.0064 Ser. 10 (4/WD) (3.73 ratio),65-68 Ser. 10 (4/WD),65-67 Ser. 10 w/leaf type springs , , , , , , , front axle (Dana 32681) . . . . . ....... . 2457066 1 18.5064 G-10 w/P/Trac. (3.36 ratio)...... (Dana 32974). . . . . . . . . . . . . . . . ..... 2466839 1 37.9565-67 PASS. w/T.H. (2.73 ratio) (exc.
P/Trac.) .................... w/12 bolt ring gear..........,...... 3869789 1 14.8565-68 PASS. (3.07, 3.31, 3.55, 3.73
ratio) (exc. P/Trac.),65-66 STA. WAG. (exc, P/Trac.) ........ w/12 bolt ring gear ..... . ........... 3852989 1 13.7065-68 PASS. w/P/Trac. (4.10, 4.56, 4.88
ratio) (8 cyl.) ................. (Eaton ED 30174) .................. 3869316 1 36.1565-68 PASS. w/P/Trac. (3.08, 3.36, 3.55,
3.70 ratio),65-68 G-10 w/P/Trac. (3.36 ratio) ..,,., (Eaton ED 30116) .................. 3869342 1 36.1565-68 Ser. 10 w/P/Trac. (3.73, 4.11
ratio) (exc. 4/WD),65-68 G-10 w/P/Trac. (3.73, 4.11 ratio),67-68 G-20 w/P/Trac .................. (Eaton ED 32063) .................. 3869286 1 36.2565 PASS. w/P/Trac. (3.08, 3.36,
3.55, 3.70 ratio) (1st design),65 G-10 w/P /Trac. (3.36 ratio) (1st
design) ...................... (Dana 33259) ...................... 3869321 1 39.2565 PASS. w/P/Trac. (4.10, 4.56, 4.88
ratio) (8 cyl.) ................. (Dana 33278) ...................... 3869313 1 58.1065-68 PASS. w/P/Trac. (3.07, 3.31,
3.55, 3.73 ratio) ............... (Eaton ED 30140) .................. 3869315 1 34.7565 PASS. w/P/Trac. (3.07, 3.31, 3.55,
3.73 ratio) .................... (Dana 33276) ...................... 3869312 1 39.2565-66 Ser. 20 (leaf type springs) (4.56
ratio) (exc. P/Trac.)........... (Dana 30258) ...................... 2358880 1 26.0065-66 Ser. 20 (leaf type springs) (4.10
ratio) (exc. P/Trac.)........... (Dana 30357) ...................... 23762700 1 26.0065-68 PASS. w/P/Trac. (3.08, 3.36, 3.55,
3.70 ratio) (2nd design),65-68 G-10 w/P/Trac. (3.36 ratio (2nd
design) ...................... (Dana 33289) ...................... 3888074 1 39.2566-68 CORVETTE (exc. P/Trac.) ....... .................................... 3878454 1 15.6066-68 PASS. w/P/Trac. (2.73 ratio) ..... w/12 bolt ring gear (Eaton 32088) .... 3890129 1 34.2068 PASS. (P/Trac. w/2.56, 2.73 ratio) w/10 bolt ring gear (Eaton 32118) .... 3918830 1 45.0060-62 Ser. 10 w/P/Trac ................ CASE UNIT, w/clutch plate guides ... , , 3794013 1 43.3546-55 2-SPD. w/Vac. Shift (1st Ser.) , , , BOLT, case assy. (°/ b -18 x 2/ drld.). , 3682519 8 (5.479)46-55 2-SPD. w/Vac. Shift (1st Ser.) . , , BOLT, case assy. (91 6 -18 x 5 3/8 drld.), , 3682520 8 (5.531)57-59 '2 TON w/P/Trac . .............. BOLT, case assy. (z-16 x 2y,)57-62 PASS., CORVETTE w/P/Trac. ... (R.H. thread) ...................... 454908 8 (8,900)60-62 PASS., CORVETTE w/P/Trac., BOLT, case assy. ( 3/8 -24 x 2/4)63-64 PASS. w/P/Trac ................ (L.H.thread)...................... 3777003 8 .2565-66 Ser. 20 w/P/Trac. (leaf type
springs) ...................... BOLT, diff. case (Dana 30836-1) ....... 2392357 8 .35
5.510 x_1967Chevrolet Motor Division
87 8 General Motors Corporation
5.511 PLATE-PLATE UNIT-CLUTCH UNIT-CLUTCH ASSY. -CUP-PIN UNIT-CAGE-SPRING-RETAINER-RING-SHIM-SPACER-GUIDE, DifferentialClutch (Positraction)
57-62 PASS., CORVETTE,58-59 '? TON,60-61 4/WD (front axle),63-64 PASS .......................... (Belleville type) (ink stamped-. 095). . 3777268 2 1.5557-62 PASS., CORVETTE,58-59 '/z TON,63-64 PASS .......................... (.095 thick)........................ 534935 A.R. 1.2663-64 CORVETTE,64-65 Ser. 10 w/3.73 ratio,64 G-10 w/3.36 ratio,65 PASS. w/3.08, 3.36, 3.55, 3.70
ratio (1st design),65 G-10 w/3.36, 3.73, 4.11 ratio (Dana 32328) (spring seat plate)
(lst design) .................. (No tangs on plates).............. 3830747 2 1.7464-68 CORVETTE,65-68 PASS.,65-68 G-10 w/3.36 ratio,67 Ser. 10 (exc. 4/WD) .............. pressure (Eaton ED 94153) (Spring seat
plate) ........................... 3869320 2 1.5565 PASS. w/3.07, 3.31, 3.55, 3.73
ratio,65 PASS. w/4.10, 4.56, 4.88 ratio clutch friction plate (Spring seat plate)
(8 cyl.) ...................... (Dana 33274) .................... 3869310 1 1.7965-68 G-10 w/3.36 ratio,65-68 PASS. w/3.08, 3.36, 3.55, 3.70
ratio (10 bolt gear) (2nd design) . (Dana 34001) (4 tangs on each plate) .. 2494749 A.R. .6257-59 PASS., CORVETTE, '%
2 TON,
60 PASS., CORVETTE (1st design) .. PLATE UNIT, w/discs ............... 3777611* , 1 11.25*NOTE: When using on 58-59 1/2 TON w/P/Trac. 2 extra 534935 Plates are required.tNOTE: Consists of 4 plates and 4 discs. (R.H. thread bolt assy.).
60-62 PASS., CORVETTE,63-64 PASS . ......................... PLATE UNIT, w/discs (Dana 22719X) .. 3865208A 1 13.35
ANOTE: Consists of 6 plates and 4 discs.60-62 Ser. 10 ......................... PLATE UNIT, w/discs .............. 3797838 1 16.15
®NOTE: Consists of 8 plates and 6 discs.63 Ser. 10 w/3.73 ratio ............. PLATE UNIT, w/discs (EDS 22065) .... 383067611 1 17.80
tNOTE: Consists of 10 plates and 8 discs.63-64 CORVETTE,64 Ser. 10 w/3.73 ratio,64 G-10 w/3.36,65-66 Ser. 10 (exc. 4/WD),65-66 G-10 w/3.73, 4.11 ratio,67 Ser. 10 (4/WD) w/P/ Trac. ........ PLATE UNIT, w/discs (Dana 23230X) .. 3830740§ 1 14.55
§NOTE: Consists of 8 discs and 8 plates.64-68 CORVETTE,65-68 G-10-20,65-68 Ser. 10 w/3.73 ratio (exc. 4/WD),65-68 PASS . ......................... PLATE UNIT, w/discs (Eaton) ........ 9781862AA 1 17.25
AANOTE: Consists of 10 eared discs and 8 splined discs.65-68 PASS. w/3.08, 3.36, 3.55, 3.70
(2nd design),65-68 G-10 w/3.36 ratio (2nd design) .... PLATE UNIT (Dana 24652X) (4 tangs
on plates) ......................... 3888070 1 16.4565 PASS. w/3.08, 3.36, 3.55, 3.70
ratio (1st design) .............. PLATE UNIT, w/discs (No tangs on plates)65 G-10 w/3.36 ratio (1st design) .... (Dana 246629X) .................... 3879850 1 17.2565-66 Ser. 20 w/leaf type springs ....... PLATE UNIT, w/discs (Dana 22938X) .. 2434741• 1 17.8065-66 Ser. 10 w/leaf type springs (exc.
4/WD) ....................... PLATE UNIT, w/discs (Dana 22937X) .. 2434740 1 10.9061-68 Ser. 20-30 ...................... CLUTCH UNIT (No Spin) .............. 3795966** 1 125.00
*NOTE: No Spin differential complete less case.61-68 Ser. 20-30 ...................... CLUTCH ASSY., w/cam (No Spin) ..... 2426036 2 24.65
eeNOTE: Part of Clutch Unit 3795966.
8-1967Chevrolet Motor Division 5.511General Motors Corporation 879
65-68 G-10 (P/Trac w/3.36 ratio) (2nddesign),
65-68 PASS. w/3.08, 3.36, 3.55, 3.70 SPRING, clutch pressure plate (Danaratio (2nd design) ............. 33824) (free length of 1 '
1/32") 3888078
65-68 PASS . ......................... SPRING, pressure plate (Eaton ED65-68 G-10 w/3.36 ratio ............... 72043) ............................ 389086064-68 CORVETTE,66 PASS.,66-68 G-10 w/3.36 ratio,67-68 Ser. 10 (exc. 4/WD) .............. SPRING, pressure plate (Eaton ED-7976) 389089966-67 PASS. w/P/Trac. (2.731) (8 cyl.). SPRING, diff. clutch pressure plate..... 388805961-68 Ser. 20-30 ...................... RETAINER, clutch (No Spin) .......... 242604357-62 PASS., CORVETTE,63-64 PASS .......................... RING, side gear...................... 374531858-59 /z TON ......................... RING, side gear...................... 237071661-68 Ser. 20-30 ...................... RING, clutch hold out (No Spin) ........ 242604060-66 Ser. 10 w/leaf type spring (exc.
4/WD
SPRING, clutch (Dana 32823) .......... 3854101 4
SPRING, clutch press platew/12 bolt ring gear (Dana 33275) ..... 3869311 4
SPRING, clutch pressure plate (2"44free length) (Dana 33802) (free lengthof2'(4") .......................... 3879833 2
CUP, press. plate spring (Dana 33230) . . 3867896 8 .33PIN UNIT, cl. ctr. cam, w/snap ring .... 2428675 1 52.75
CAGE, clutch friction plate (Dana 32327) 3830746 2 1.55
CAGE, clutch friction plate (w/12 boltring gear) (Dana 33273) ............. 3869309 1 1.69
SPRING, clutch (No Spin) ............ 2426042 2 .85
2
4
64 CORVETTE (2nd des.),65 PASS. w/3.08, 3.36, 3.55, 3.70
ratio,65-66 Ser. 10 (exc. 4/WD),65-66 G-10 w/3.73, 4.11 ratio,67 Ser. 10 (4/WD) w/P/Trac. ........61-67 Ser. 20-30 ......................63-64 CORVETTE,64-66 Set. 10 w/3.73 ratio,64 G-10 w/3.36 ratio,65-66 PASS. w/3.08, 3.36, 3.55, 3.70
ratio,65-66 G-10 w/3.36, 3.73, 4.11 ratio,67 Ser. 10 (4/WD) w/P /Trac. ....... .65 PASS. w/3.07, 3.31, 3.55, 3,73
ratio,65 PASS. w/4.10, 4.56, 4.88 ratio
(8 cyl.) ......................61-68 Ser. 20-30 ......................63-64 CORVETTE,64-66 Ser. 10,64-66 G-10 w/3.73, 4.11 ratio,65-66 Ser. 20 w/4.11 ratio (exc. 4/WD,
D-D),65-66 Ser. 10 w /3.73 ratio (exc. 4/WD),67 Ser. 10 (4/WD) w/P/Trac. ........65 PASS. w/3.07, 3.31, 3.55, 3.70
ratio .........................65 PASS. w/4.10, 4.56, 4.88, (8 cyl.)65 PASS. w/3.08, 3.36, 3.55, 3.70
ratio (1st design),65 G-10 w/3.36 ratio (1st design) ....
.75
.75
.75
.75
.40
2 .354 .752 5.00
2 12.302 11.452 8.75
....................... RING, side gear (Dana .14Yb) .......... 2409731• 2 10.4065-66 Ser. 20 w/leaf type spring ........ RING, side gear (Dana 31496) .......... 2410508• 2 13.3560-63 Ser. 10 w/3.73 ratio ............. SHIM (.005 thick) (Eaton ED 92314-5) • .. 3772608 A.R. .6060-63 Ser. 10 w/3.73 ratio ............. SHIM (.007 thick) (Eaton ED 92314-7) ... 3781256 A.R. .6060-63 Ser. 10 w/3.73 ratio ............. SHIM (.010 thick) (Eaton ED 92314-10) .. 3772609 A.R. .6064-68 CORVETTE,65-68 PASS.,65-68 Ser. 10 w/3.73, 4.11 ratio (exc
4/WD),65-68 G-10,67-68 G-20 ........................... SHIM (.005) (Eaton 94128-5)............ 977347 A.R. .6064-68 CORVETTE,65-68 PASS.,65-68 Ser. 10 w/3.73, 4.11 ratio (exc.
4/WD),65-68 G-10,67-68 G-20 ........................... SHIM (.007) (Eaton 94128-7) ........... 9778348 A.R. .60
5.511 G-1967880
Chevrolet Motor DivisionGeneral Motors Corporation
64-68 CORVETTE,65-68 PASS.,65-68 Ser. 10 w/3.73, 4.11 ratio (exc.
4 /WD),65-68 G-10,67-68 G-20 ........................... SHIM (.010) (Eaton ED 94128-10) ....... 9778349 A.R.65 PASS. w/10 bolt ring gear,65-68 Ser. 10 w/3.73, 4.11 ratio (exc.
4/WD),65-68 G-10 w/3.36, 3.73, 4.11 ratio,66-68 PASS.,67-68 G-20 ........................... SHIM (.012 thick) (Eaton ED 94128-12) .. 2472358 A.R.65 PASS. w/10 bolt ring gear,65-68 Ser. 10 w/3.73, 4.11 ratio,65-68 G-10 w/3.36, 3.73, 4.11 ratio,66-68 PASS.,67-68 G-20 ........................... SHIM (.015) (Eaton ED 94128-15) ....... 2472359 A.R.65-68 PASS.,66-68 G-10 w/3.36 ratio,67-68 Ser. 10, G-20 (exc. 4/WD) ........ SHIM (.020) (Eaton ED 94128-20) ....... 9777600 A.R.65-68 PASS.,66-68 G-10 w/3.36 ratio,67-68 Ser. 10, G-20 (exc. 4/WD) ........ SHIM (.025) (Eaton ED 94128-25) . ..... 9777601 A.R.65-68 PAS6.,66-68 G-10 w/3.36 ratio,67-68 Ser. 10, G-20 (exc. 4/WD) ........ SHIM (.030) (Eaton ED 94128-30) ....... 9777602 A.R.65-68 PASS. w/3.08, 3.36, 3.55, 3.70
ratio,65-68 G-10 w/3.36 ratio ............... SPACER, (.016) ...................... 2489183 165-68 PASS. w/3.08, 3.36, 3.55, 3.70
ratio,65-68 G-10 w/3.36 ratio ............... SPACER (.020) ...................... 2489184 165-68 PASS. w/3.08, 3.36, 3.55, 3.70
ratio,65-68 G-10 w/3.36 ratio ............... SPACER (.024) ...................... 2489185 165-68 PASS. 2/3.08, 3.36, 3.55, 3.70
ratio,65-68 G-10 w/3.36 ratio ............... SPACER (.028) ...................... 2489186 165-67 PASS. w/P/Trac. (2.73 ratio) ..... SPACER, (.016) ...................... 3888054 A.R.65-67 PASS. w/P/Trac. (2.73 ratio)..... SPACER, (.020) ...................... 3888055 A.R.65-67 PASS. w/P/Trac. (2.73 ratio) ..... SPACER, (.024) ...................... 3888056 A.R.65-67 PASS. w/P/Trac. (2.73 ratio) ..... SPACER, (.026) ...................... 3888058 A.R.65-67 PASS. w/P/Trac. (2.73 ratio) ..... SPACER (.028) ...................... 3888057 A.R.60-61 Ser. 10 (1st design) .............. GUIDE, plate (Eaton ED 92502) ....... 3776936B 4
SNOTE: Used only w/3768516, Case. Not interchangeable w/3779939.61-62 Ser. 10 (2nd design) ............. GUIDE, plate (Eaton ED 92743) (stamped 2) 3789939 463 Ser. 10 w/3.73 ratio ............. GUIDE, plate (Eaton ED 94044) ........ 3830675 464-68 CORVETTE,64 G-10 w/3.36 ratio,65-68 PASS.,65-68 Ser. 10 w/3.73 ratio (exc. 4/WD),65-68 G-10,67-68 Ser. 10, G-20 (exc. 4/WD) ........ GUIDE, plate (Eaton ED 94228) ........ 9778355 465-68 PASS . ......................... GUIDE, w/3871310, 3883763,67-68 G-10 ........................... w/3883763 (Dana 33295) ............ 3872495 4
5.517 SHAFT, Differential Pinion
.60
.60
.60
.95
.95
.95
.35
.35
.35
.351.601.601.601.601.60
.20
.20.20
.39
.38
1.30
1.30
7.80
5.511-5.517
(47/64 dia. x 4' 5/32 O.L.) ............... 3714784 1
( 51/.O. D. x 5 214 4 O.L.) .............. 3843667 1
(3/4 dia. x 4 25 ; O.L.) ................ 3745314 2
881
38-64 PASS., CORVETTE, G-10 (exc.P/Trac.) .....................
38-42 COMM.,46-63 'z TON (exc. P/Trac.),60-63 Ser. 10 w/P/Trac.,64-67 Ser. 10, G-10 (exc. P /Trac. 3.36),64-67 PASS. w/12 bolt ring gear (exc.
P/Trac.),67 G-20 ...........................57-60 PASS., CORVETTE w/P/Trac.
(1st design) ..................
-1967Chevrolet Motor DivisionGeneral Motors Corporation
58-59 '/2 TON w/P/Trac.,60-62 PASS., CORVETTE w/P/Trac.
(2nd design),60-61 4/WD w/P/Trac. (front axle)...... (3/4 dia. x 4 25
/ 2 O.L.-"V" cut)
63-64 PASS. w /P/Trac . ............... (Dana 30931) .................... 531312 2 6.9560-68 4/WD,65-67 Ser. 1 0 w/leaf type springs
(exc. P/Trac.) ................ frt. axle ( 3/4 dia. x 5 O.L.) (Dana 17878) 2346846 1 2.0561-62 Ser. 20 (2nd design) (exc. D-D,
4/WD),62 Ser. 20 (4/WD) (2nd design),63-68 Ser. 20 (exc. D-D) .............. (13/u dia. x 6/,, O.L.) ............... 3843668 1 1.85
®NOTE: For 1st design use 3663696, SPIDER.63-64 CORVETTE w/P/Trac.,64-68 G-10 w/P/Trac. (3.36 ratio),65-68 PASS. w/P/Trac. (3.08, 3.36,
3.55, 3.70 ratio) .............. (Dana 32266) ...................... 3830742 1 2.1864 Ser. 10 w/3.73 ratio (1st design)
(exc. 4/WD) .................. (Dana 32289) ...................... 3849913* 1 2.25*NOTE: Use with rough differential case.
64-68 CORVETTE w/P/Trac.,65-68 PASS. w/P/Trac. (3.08, 3.36, 3.55,
3.70 ratio),65-68 G-10 w/P/Trac. (3.36 ratio) ...... (3/ O.D. x 4 5 Y„ O.L.) (Eaton ED 6960) 9776894 1 2.6664-66 Ser. 10 w/P/Trac. (3.73 ratio)
(2nd design) (exc. 4/WD),64 G-10 (3.73 ratio),65-66 G-10 w/P/Trac. (3.73, 4.11 ratio),65 PASS., w/P/Trac. (3.07, 3.31,
3.55, 3.73 ratio),65 PASS. w/P/Trac. (4.11, 4.56, 4.88
ratio) (8 cyl.),67 PASS. (8 cyl.) (2.73 ratio),67 Ser. 10 (4/WD) w/P/Trac. ........ (5164 O.D. x 5/ 6) (Dana 33270) ....... 3869308 A.R. 2.2765-68 PASS. w/10 bolt ring gear (exc. P/
Trac.),65-68 CORVETTE (exc. P/Trac.),65-68 G-10 w/3.36 ratio (exc. P/Trac.) .. .................................... 3931174 1 1.7565-66 Ser. 20 w/leaf type springs (exc.
P/Trac.) .................... (5'/ O.L. x'/e O.D.) (Dana 30263)..,. 2358883• 1 2.2565-66 Ser. 20 (leaf type springs
w/P/Trac.) .................. (5/o4 O.L.) (Dana 31041) ............ 23923540 2 9.0068 G-10 w/3.31, 3.73, 4.11 ratio
(exc. P/Trac.),68 PASS. w/12 bolt ring gear
(exc. P/Trac.),68 Ser. 10, G-20(exc. P/Trac.) ...... .................................... 3931175 1 1,75
5.518 SCREW-PIN, Pinion Shaft Lock
38-42 PASS., COMM.,46-64 PASS., CORVETTE, '/Z TON (exc.
P/Trac.),65-67 PASS. (exc. P /Trac.),65-67 CORVETTE, 1/2 TON (exc.
P/Trac.),67 G-20 ........................... (S4 -18)........................... 472546 1 .2060-62 Ser. 10 w/P/Trac ................ (1/, dia. x 2'/ O.L.) (Eaton ED 92317) . 3772612 1 .2563-64 CORVETTE w/P/Trac.,64 G-10 w /P/Trac. (3.36 ratio)
(1st design) .................. (Dana 32267) ...................... 3830743 1 .9563-68 Ser. 10 w/P/Trac., (3.73 ratio),65-68 PASS. w/P/Trac. (12 bolt ring
gear),65-68 G-10 w/P/Trac. (3.73, 4.11 ratio),67-68 G-20 ........................... (Eaton ED 92994) .................. 3830672 1 .2564-68 G-10 w/P/Trac. (2nd design),65-68 PASS. w/P/Trac . ............... (Dana 32845) ...................... 2462906 1 .35
5.517-5.518
c-1967Chevrolet Motor Division
882 General Motors Corporation
64-68 CORVETTE w/P/Trac.,65-68 PASS. w/P/Trac. (3.08, 3.36,
3.55, 3.70 ratio),65-68 G-10 w/P/Trac. (3.36 ratio) , , , . , , (Eaton 93465) ...................... 3869319 1 .2564-66 Ser. 10 w/P/Trac. (3.73 ratio)
(exc. 4/WD),64-66 G-10w/P/Trac. (3.37, 4.11 ratio),66-67 PASS. w/P/Trac. (2.73 ratio)
(8 cyl.),67 Ser. 10 (4/WD) w/P/Trac. ........ (Dana 32283) ...................... 3849912 1 .9560-68 4/WD,65-67 Ser. 10 w/leaf type springs PIN, front axle (17/6
(exc. P/Trac.) ................ 13449) ............................ 2402527 1 .1061-62 Ser. 20 (2nd design) (exc. D-D,
4/WD),62 Ser. 20 (4/WD) (2nd design),63-68 Ser. 20 (exc. D-D) ............... PIN (/ dia. x 15/^ O.L.) .............. 3813397e 1 .10
®NOTE: For 1st design use 3663696, SPIDER.
5.520 SPIDER, Differential Pinion
38-55 UTILITY (Prod.) (1st Ser.),67-68 Ser. 30 w/11000 lb. axle ......... (forged 3656895) ................... 370429 1 8.2539-46 2-SPD. w/Mech. Shift ........... (646 0.L.) ......................... 3651425 1 9.1546-59 i , 1 TON (exc. 4/WD),57-59 Ser. 3E-3G w/4WD,60-61 Ser. 20 (1st design) (exc.
D-D, 4/WD),60-68 Ser. 20 (D-D),60-62 Ser. 20 (4/WD) (1st design),60-68 Ser. 30 (exc. 11,000 lb. axle),65-68 Ser. 20 w/4.11 ratio (327),67-68 Ser. 20 (4/WD) .................. (forged 3663696) . ................. 3663696w 1 8.25
®NOTE: For 2nd design use 3843668 SHAFT, Group 5.517 and 3813397 PIN, Group 5.518.46-52 2-SPD. w/Vac. Shift (1st design) , (1"/6 hub hole) (stmp'd. 3278-M-91) ... 3682505 1 11.8552-55 2-SPD. w/Vac. Shift (2nd design)
(1st Ser.)...................... (15/6 hub hole)..................... 2295617* 1 11.85*NOTE: Can be used in place of 3682505 but requires proper short length R.H. axle shaft.
55-59 2-SPD. (2nd Ser.) ................ diff. pinion........................ 3873573 1 10.75
5.526 GEAR, Differential Pinion
38-42 COMM.,46-63 'z TON (exc. P/Trac.) ........... (10 teeth—shaft hole"/6) ............. 370225 2 4.0538-51 UTIL. (exc. 2-SPD.),52-55 1'z TON (1st Ser.) (exc. 2-SPD.) .. (11 teeth—shaft hole'/8 ) ............. 370446 4 4.9539-42 2-SPD .......................... (9 teeth) (stmp'd. 2234-K-63)........ 3651424 4 5.1546-68 PASS., CORVETTE (w/10 bolt
ring gear) (exc. P/Trac.),64-68 G-10 (w/3.36 ratio) (exc. P/Trac.) . ............................. .... 3880142 2 3.8546-59 'a, 1 TON (exc. 4/WD),60-67 Ser. 20-30 (exc. P/Trac., 11,000
lb. axle) ..................... rear,57-59 Ser. 3E-3G w/4WD ............... frt. axle (10 teeth).................. 3681055 A.R. 4.0546-55 2-SPD. w/Vac. Shift (1st Ser.) .... (9 teeth) (stamped 3683815) .......... 3683815 4 7.0552-55 2 TON (1st Ser.) (exc. 2-SPD.),67-68 Ser. 30w/11,000 lb. axle ......... (10 teeth—shaft hole 7/) 369774557-62 PASS., CORVETTE w/P/Trac.,58-59 `2 TON w/P/Trac.,63-64 PASS, w/P/Trac.,65-68 Ser. 10 w/leaf type springs (exc.
P/Trac., 4/WD) ............... (10 teeth) (dab of orange paint) ....... 2370715'tNOTE: When using 2370715 in place of 3745313, 3744618 side gear must also be used.
60-62 Ser. 10 w/P/Trac ................ (10 teeth_ 13/ 6 shaft hole) (EatonED 40250) ....................... 3772617
60-68 4/WD,65-67 Ser. 10 w/leaf type springs
(exc. P/Trac.) ................ (10 teeth) front axle (Dana 17717) .... 2346845 2 3.30
4 4.75
4 3.20
2 6.45
©-1967Chevrolet Motor Division 5.518-5.526General Motors Corporation 883
(Eaton ED 40335) .................. 9778343 2 6.55
(10 teeth) (2 37/64 O.D. x 1 3/ b I.D.)
(Dana 33268) .................... 3869306 2 3.10
(10 teeth-shaft hole '/ ") (Dana 30261) 2358882• 2 3.30(10 teeth-1° shaft hole) (Dana 31040). 2392353• 4 3.60
(10 teeth) ......................... 3867816 1 3.90
63-68 Ser. 10 w /P/Trac. (3.73 ratio),64-68 G-10-20 w/P/Trac. (3.73, 4.11
ratio),65-68 PASS. w/P/Trac. (12 bolt ring
gear) ........................64 Ser. 10 (exc. D-D, 4/WD, P/Trac.),64 Ser. 10 (D-D, 4/WD),64 G-10 w/4.11 ratio (2900 lb. axle),64 G-10 w/3.73 ratio (exc. P/Trac.),65-68 G-10 (exc. 3.36 ratio, P/Trac.),65-68 Ser. 10 (exc. P/Trac., leaf type
springs),65-68 Ser. 10 (4/WD) (exc. P/Trac.),65-68 PASS. w/12 bolt ring gear (exc.
P % Trac. ),67-68 G-20 ...........................66 Ser. 10 (exc. P/Trac.),64-66 Ser. 10 w"P/Trac. (3.73 ratio),65-66 G-10 w/P/Trac. (3.73, 4.11 ratio),67 Ser. 10 (4/WD) w/P/Trac. .......64-68 G-10 w/P/Trac. (3.36 ratio),64 CORVETTE w/P/Trac.,65-68 PASS. w/P/Trac. (3.08, 3.36, 3.55,
3.70 ratio) ....................64-68 CORVETTE w/P/Trac.,65-68 PASS. w/P/Trac. (3.08, 3.36,
3.55, 3.70 ratio),65-68 G-10 w/P/Trac. (3.36 ratio) ......65 PASS. w/P/Trac. (2.73, 4.10, 4.56,
4.88 ratio) (8 cyl.),66-67 PASS. w/P/Trac. (2.73 ratio) .....
65-66 Ser. 20 w/leaf type springs (exc.P'Trac.) .....................
65-67 Ser. 20 w/P/Trac. (leaf type sprgs.)67-68 Ser. 20-30 (exc. P/Trac. 11,000
lb. axle) .....................
(Eaton 40343) ...................... 3830670 2 6.25
(10 teeth) ......................... 3880140 2 3.85
(Dana 32264) ...................... 3849909 2 3.35
(Dana 32808) ...................... 3854260 2 3.35
5.52 7 GEAR UNIT, Differential Side w/Pinion
63-64 CORVETTE w/P/Trac........... (Dana 2375X) ...................... 3867746 1 24.2564-66 Ser. 10 w'P/Trac. (exc. 4/WD),64-66 G-10 w/P /Trac. (3.73, 4.11 ratio) (Dana 23488X) ..................... 2462907 1 19.2064 G-10 w/3.36 ratio (1st design) .... .................................... 2462908 1 19.2065-66 PASS. w/P/Trac. (3.08, 3.36,
3.55 ratio),65-66 G-10 w / P/Trac. (3.36 ratio) ...... (Dana 23819X) ..................... 2472349 1 21.20
5.528 GEAR, Differential Side
38-42 UTILITY,46-55 1'.z TON (1st Ser.) (exc. 2-SPD.)... (10 spline-18 teeth) 4,3 O-D.( P )( )....... 370445 2 8.5042-46 M, OR, OS, OW, OY w/H.D.,46-51 2 TON ......................... (16 spline-18 teeth ................. 3661874 2 10.2540-42 COMM.,46-63 '/ TON (exc. P/Trac.) ........... rear axle,57-59 Ser. 3A w/4/WD ................. front axle (16 teeth) ................ 3652344 2 7.5046-54 PASS.,53-55 CORVETTE .................... (16 teeth) (stamped GM-R) ........... 3682122 2 6.7546-66 '/_., 1 TON ...................... rear axle,67 Ser. 20-30 (1st design) (exc.
P/Trac., 11,000 lb. axle)...... front axle (18 teeth) ................ 3681056 2 8.3546-51 2-SPD. w/Vac. Shift ............. (16 teeth)(stmp'd. 2234-T-202)....... 3682526 2 18.8552-53 2 TON (exc. 2-SPD.),67-68 Ser. 30 w/11,000 lb. axle ........ (27 spline-18 teeth) ................ 3697746 2 9.9552-53 2-SPD. w/Vac. Shift ............. (27 spline-16 teeth)................ 3698942 2 19.5554-55 2 TON (prod.) (1st Ser.) .......... (29 spline) (forged 3602292) ......... 3702292 2 9.9554-55 2-SPD. w/Vac. Shift (1st Ser.) .... (29 spline) (stamped 3703724)........ 3703724 2 19.5555-64 PASS. (exc. P/Trac.),56-68 CORVETTE (exc. P/Trac.) ....... (16 teeth) ........................... 3820638 2 6.90
5.526-5.528 -1967884 Chevrolet Motor Division
General Motors Corporation
58-59 '2 TON w/P/Trac ................ right and left (20 splines) ........... 2370717 2 4.0057-62 PASS., CORVETTE w/P/Trac.,63-64 PASS. w/P/Trac . ............... (daub. of orange paint) .............. 3744618- 2 4.00
NOTE: When using 3744618 in place 3745317 it may be necessary to use 2370715 pinion gear.60-62 Ser. 10 w/P/Trac . .............. (16 teeth-17 splines) (Eaton 40251) , , 3772616 2 10.3060-68 4 /WD .......................... front axle (16 teeth) (Dana 31487) .... 3779581 2 7.3061-67 Ser. 20-30 w/P/Trac ............. (17 splines-2 27/32 O.D.) (No Spin) ..... 2426038 2 16.6563-64 Ser. 10 w/P/Trac. (3.73 ratio) .... (Eaton 40334-1) .................... 3830669 2 8.7564 G-10 w/P/Trac. (3.36 ratio)
(2nd design) .................. (Dana 32630)...................... 3848014 2 7.5064 Ser. 10 (exc. D-D, 4/WD, P/Trac.),64 Ser. 10 (D-D, 4/WD),64 G-10 w/3.73, 4.11 ratio (exc,
P/Trac.) ..................... (17 splines-16 teeth) ............... 3846424 2 7.2564 Ser. 10 w/P/Trac. (3.73 ratio) .... (Dana 32282) ...................... 3849911 2 7.5064 CORVETTE w/P/Trac........... (Dana 33205) ...................... 3867897 2 7.2564 G-10 ........................... .................................... 3832415 2 6.4064-68 CORVETTE w/P/Trac. ......... (Eaton ED 40334-6) ................. 3869317 2 8.1565-66 STA. WAG. (exc. P/Trac.),65-68 PASS. w /12 bolt ring gear
(exc. P/Trac.),65-68 Ser. 10, G-10-20 (exc. P/Trac.) ... (30 splines-16 teeth) ............... 3846078 2 6.9065-68 PASS. w/P/Trac. (3.08, 3.36,
3.55, 3.70 ratio),65-68 G-10 W/P/Trac. (3.36 ratio) ...... (Dana 33243) (28 splines-16 teeth) ... 2472350 2 8.5065-68 G-10,65-68 PASS. w/10 bolt ring gear
(exc. P/Trac.) ............... (28 splines-16 teeth)............... 3863725 1 6.5065-68 PASS. w/3.07, 3.31, 3.55,
3.73 ratio,65-68 PASS. (8 cyl.) w/4.10, 4.56, 4.88
ratio,
65-68 G-10-20 w/P/Trac. (3/73 ratio),(interior spline 30 exterior spline)
65-68 Ser. 10 w'P%Trac. (3.73 ratio) .... (23-18 teeth) (Eaton ED 40334-7) ..... 2472352 2 8.4065-67 Ser. 10 w/P/Trac. (3.73 ratio)(exc. 4;'WD),
65-67 G-10 w%PiTrac. (3.73, 4.11 ratio) (30'splines-16 teeth) (Dana 33228) ... 2472355 2 8.5065 PASS. w/P/Trac., (3.07, 3.31,
3.55, 3.73, 4.10, 4.56, 4.88 ratio)(1st design),
66-67 PASS. w/P/Trac. (2.73 ratio)(8 cyl.) ...................... (30 splines-16 teeth) (Dana 33267) ... 3869305 2 13.80
65-68 PASS. w/P/Trac. (3.08, 3.36, 3.55,3.70 ratio) (10 bolt ring gear) ... (interior spline 28-exterior spline 23-
65-68 G-10 P/ Trac. (3.36 ratio) ........ 18 teeth) (ED 40334-5) .............. 3869344 2 8.1565-66 Ser. 20 (leaf type springs w/4.10,
4.56 ratio) (exc. P/Trac.) , , , , , , (30 splines-15 teeth) (Dana 31493) , 2402600• 2 7.8067-68 Ser. 20-30 (2nd design) (exc.PTrac., 11,000 lb. axle)....... (18 teeth) ......................... 3867815 2 6.95
5.529 GEAR ASSEMBLY, Ring and Pinion (not sold separately)
NOTE: Part numbers in parentheses are stamped on ring gear and pinion respectively.
40-52 (exc. P.G.) .....................40-52 (exc. P.O.),53 SDL ...........................50-54 w P.G . ........................53-54 (exc. P.G.) .....................55-56 (exc. P.G., O.D.) ................55-56 w/P.G . ........................55-59 w/O. D.,62-64 v!4.11 ratio ....................
PASSENGER CAR
(41 - 1 1 T)(595022-3652285)........... 604397 1 38.65
(37-9T) (3652178-3704417)........... 3705430 1 49.95(3 9
-11T)(3691464-3704411).......... 3705262 1 44.00(37-10T
)(3697720-3703799).......... 3705261 1 44.00(3 7 -10T ) (3725864-3733910).......... 3748433 1 49.25( 32-9T
)(3731604-3731617)........... 3748430 1 46.95
( 37-9T)(3733908-3733912)........... 3748434§ 1 49.25
-1967Chevrolet Motor Division 5.528 -5.529General Motors Corporation 885
57-58 w/A.T.,59 A.T. (exc. 348),59 3-SPD. (348) (exc. H.L.
Cam, H/Per.),60-61 3-SPD., P.G., (6 cyl.),60-61 (P.G. w/C.A.C., Cool Pack (283),60.61 3-SPD., T.G. (283),62-64 w/3.36 ratio .................... (37-11T)(3735390-3736508)............ 3748437 1 49.2559-61 w/O.D.,60 .61 w,'4 .8PD. (348),60-61 3-SPD. w/H/Per. (348),62-64 3.70 ratio ...................... (37-10T)(3737957-3733910).......... 3748438 ® 1 49.25
eNOTE: When used with P/Trac., required P/Trac. differential unit 3853550 (group 5.510),62-64 4.56 Ratio ...................... (41-9T)(3720089-90)................ 3748447( 1 49.2557-58 exc. O.D., A.T.,59 4-SPD. (348) (exc. H.L. Cam),59-60 w/3-SPD.,59-61 P.G. w/H.L. Cam, H/Per. (348),61 STA. WAG. (3-SPD. w/P/Trac.)
(6 cyl.),61 STA. WAG. (P/Trac. w/H/Per.)
(348),62 STA. WAG. w!355,63-64 w/3.55 Ratio ................... (32-9T)(3783188-3783189)........... 3795479 1 49.2559-61 w/A.T. (348) (exc. H.L. Cam),60-61 P.G. (exc. C.A.C.),61 w/4-SPD.,62-64 3.08 Ratio ...................... (37-12)(3756448-3756446)........... 3758549 1 49.2562-63 4.88 Ratio ..................... (39-8T) (Used to convert from 3.08,
3.36, 3.70 ratios) ................. 3830261 1 70.3062-63 4.88 Ratio ..................... (39-8T) (Used to convert from 4.11,
4.56 ratios) ...................... 3830264 1 70.3062-63 5.13 Ratio ...................... (41-8T) (Used to convert from 8.08,
3.36 and 3.70 ratios) .............. 3830269 1 70.3062-63 5.13 Ratio ...................... (41-8T) (Used to convert from 4.11
and 4.56 ratios) .................. 3830266 1 70.3062-63 5.38 Ratio ...................... (43-8T) (Used to convert from 3.08,
3.35, 3.70 ratios) ................. 38302 71 1 70.3062-63 5.38 Ratio ...................... (43-8T) (Used to convert from 4.11
and 4.56 ratios) .................. 3830274 1 70.3065 3.36 ratio (1st design) ........... (37-11T)(3790628-3830428)......... 3846193 165-68 4.88 Ratio w/12 bolt ring gear .... (39-8T) (3862528-3862516) .......... 3865967 1 46.1565-68 3.31 Ratio w/12 bolt ring gear .... (43-13T) (3862689-3862693) ......... 3865994 1 49.2565-68 3.55 Ratio w/12 bolt ring gear .... (39-11T) (3853010-3853008) ......... 3865995 1 52.7565-68 3.55 Ratio w/10 bolt ring gear .... (39-11T) (3880046-3790627) ......... 3886356 1 44.8565-68 3.07 Ratio w/12 bolt ring gear .... (43-14T) (3862691-3853003) ......... 3865996 1 46.9565-68 3.73 Ratio w/12 bolt ring gear .... (41-11T) (3862525-3862513) ........ 3865997 1 52.75
65-68 4.10 Ratio w/12 bolt ring gear ...65-68 4.65 Ratio w/12 bolt ring gear ...65-68 3.08 Ratio w/10 bolt ring gear ...65 3.70 Ratio w/1 0 bolt ring gear
(1st design) ..................65 2.73 Ratio w/12 bolt ring gear ...65-68 3.36 Ratio w/10 bolt ring gear
(2nd design) ..................65-67 3.70 Ratio w/10 bolt ring gear
(2nd design) ..................68 2.29 Ratio w/12 bolt ring gear ... .
(41-10T)(3862526-3862514)......... 3865998 1 55.45(41-9T)(3862527-3862515).......... 3865999 1 49.25(37-12T) (3880042-3790629) ......... 3886358 1 44.85
(37-10T)(3849722-3849719)......... 3852337 1 44.85(41-15T) .......................... 3875267 1 48.40
(37-11T)(3880044-3790628)......... 3886357 1 44.85
(37-10T)(3880048-3849722)......... 3886359 1 44.85...........................I...... 3933963 1
CORVETTE
53-55 3.55 Ratio ...................... (39-11T)(3691464-3704479)......... 3748436 156 w/3-SP D . ...................... (37-10T)(3735864-3733910) ......... 3748433 156 W/P,G . ........................ (32-9T)(3731604-3731617).......... 3748430 157-62 4.11 Ratio ...................... (37-9T)(3733908-3733912)........... 3748434( 157-62 3.70 Ratio ...................... (37-10T)(3737957-3733910)......... 3748438® 1
®NOTE: When use w/P/Trac., requires P/Trac. differential unit 3853550(group 5.510).
57-62 4.56 Ratio ...................... (41-9T) (3720089-90)............... 3748447( 157-61 w/P.G.,62 3.55 Ratio...................... (32-9T) (3783188-3783189)......... 3795479 1
46.9549.2549.7549.25k*
**
5.529
-1967Chevrolet Motor Division
886 General Motors Corporation
62 3.36 Ratio ...................... (37-11T)(3735390-3736508).......... 3748437 1 49.2562 3.08 Ratio ...................... (37-12T)(3756448-3756446)......... 3758549 1 **63-64 4.11 Ratio ...................... (37-9T)(3733908-3820896)........... 3822988 1 49.2563-64 3.36 Ratio ...................... (37-1 IT)(3735390-3819186),........ 3822989 1 46.9563-64 3.55 Ratio ...................... (32-9T)(3783188-3820899).......... 3822990 1 46.9563-64 3.08 Ratio ...................... (37-12T)(3756448-3819184).....,.,. 3822991 1 46.9563-64 4.55 Ratio ...................... (41-9T)(3720089-3820897).......... 3822992 1 46.9563-64 3.70 Ratio ...................... (37-10T)(3737957-3819081).......... 3822993 1 49.2565-68 3.36 Ratio ...................... (37-11T)(3735390-3885942)......... 3887839 1 53.5065-68 4.56 Ratio ...................... (41-9T)(3894568-3894566).......... 3896576 1 46.1565-68 4.11 Ratio ...................... (37-9T)(3733908-3885945).......... 3887837 1 53.7065-68 3.70 Ratio ...................... (37-10T)(3737957-3885944)......... 3887835 1 44.8565-68 3.55 Ratio ...................... (32-9T)(3783188-3885943)........... 3887836 1 48.9065-68 3.08 Ratio ...................... (37-12T)(3772134-3885951)......... 3887834 1 46.1568 2.73 Ratio (P/Trac.) ............ (41-15T)(3924344-3924343)......... 3933096 1 48.50
§ NOTE: When used with P/Trac. requires P/Trac. differential unit 3853552(group 5.510).
TRUCK
39-42 VF, WD, Y, M w/2-SPD........... (19-8T) (3889M117-3890L-222)...... 603771 1 67.3040-53 i 2 TON ......................... (37-9T_hypoid)(3652510-3704661).... 3705439 1 53.7540 WD,41-55 1'/2 TON (1st Ser.),67 Ser. 30 (D-D) (DIESEL) w/11000
lb. axle ...................... (38-7T-hypoid)(3652282-3652547)... 2352908 1 74.0040 WD,41-55 UTILITY (1st Ser.),67-68 Ser. 30 w /11,000 lb. axle ......... (37-6T-hypoid) (3652522-3552549) ... 604427 1 74.0046-60 3-, TON (exc. D-D) ............... rear axle,57-59 Ser. 3E w4/WD ................. front axle (32-7T hypoid) (3682104-03) 609797 1 56.5046-59 D-D, 1 TON,60 Ser. 20 (D-D),60 Ser. 30 ......................... rear axle,57-59 Ser. 3G w, 1 4!WD ................. front axle (36-7T-hypoid) (3682146-45) 609798 1 59.5046-55 2-SPD. w/Vac. Shift (lo ratio)
(1st Ser.) ..................... (23-8T) (3889M221-3890C-289)....... 2440755• 1 87.0054 lz TON ......................... (39-10T-hypoid)(3697702-03)........ 3707516 1 52.5054-55 2-SPD. w/Vac. Shift (hi ratio)
(1st Ser.) ..................... (22-7T)(3889R252-38905-331)........ 3707547 1 95.2555-59 './2 TON (exc. O/D, P/Trac),60-62 Ser. 10,63 Ser. 10 (4WD) (1st Ser.) ......... (3.90 ratio) (39-10T-hypoid)57-59 Ser. 3A w/4/WD ................. (3697702-3740897), front axle ...... 3747808 1 59.7555-59 2-SPD. (2nd Ser.) ................ (32-5T-hypoid) (3702244-3711483)... 3717213 1 99.0055-57 '/Z TON w/O/D (2nd Ser.),60-62 Ser. 10 w/4.11 ratio ............. (37-9T-hypoid) (3652510-3740875) ... 3747809 1 57.7558-59 !? TON ......................... (37-10T-hypoid) (3711420-3744091) .. 3749020 1 57.7558-59 '2 TON w/P/Trac,, , , , , , , , , ,,, , , , (47-12T-hypoid) (2354373-2354374) .. 2354371 1 49.7558-62
12 TON (exc. 4/WD) .............. (13-44T-hypoid) (3763461-3763466) .. 3764960 1 54.75
60-63 Ser. 10 (4/WD) (1st Ser.) , , , , , . , , . frt. axle (47-12T-hypoid) (Spicer18445-31488) .................... 2402513 1 49.75
60-68 Ser. 20 (4/WD) w/4.56 ratio....... frt. axle (50-11T-hypoid) (Spicer18679-31491) ............... ...... 2403655 1 49.75
61-64 Ser. 20 w/4.57 ratio (exc. D-D),65-68 Ser. 20-30 w/4.57 ratio .......... (32-7T-hypoid)(3768612-3766683) .... 3785597 1 61.5061-64 Ser. 20 (D-D),61-68 Ser. 30 w/5.14 ratio ............. (36-7T-hypoid)(3768613-3766684).... 3785598 1 61.5062-63 Ser. 30 (D-D) .................. (35.-6T) (3820880-382 0882) .......... 3825110 1 56.6063-64 Ser. 10, G-10 w/3.73 ratio
(exc. 4 /WD),63-64 Ser. 10 (4/WD) w/3.73 ratio
(2nd Ser.) .................... (41-11T-hypoid) (3817778-3817775) .. 3824445 1 49.7563-64 Ser. 10 w/3.07 ratio
(exc. D-D, w/WD) ............. (43-14T-hypoid) (3817779-3817776) .. 3824446 1 49.7563-64 Ser. 10, G10 w/4.11 ratio (exc.
4/WD) ....................... (37-9T-hypoid)(3819037-3819038).... 3824447 1 49.7563-68 Ser. 10 (4WD) (2nd Ser.)
(3.73 ratio) .................. front axle (41-11T)................. 3831912 1 53.0063-68 Ser. 20-30 w/4.11 ratio (exc.
4 WD, D-D) ................... (37-9T-_.ypoid)(3838365-3838369).... 3844318 1 69.0064-65 G-10 w/3.36 ratio (1st design)..... (37-11T-hypoid) (3790628-3832408) 3846193 1 **
,c -1967Chevrolet Motor DivisionGeneral Motors Corporation 887
5.529
65-67 Ser. 10 w/3.07 ratio (excD-D R %WD ) ................ . .. (43-14T—hypoid) (3817779-3864624) , . 3887832 1 48.90
65-66 Ser. 10w -'leaf type springs ....... (3.54:1 ratio) ..................... 2428707s 1 49.7565-66 Ser. 20 ;/leaf type springs ....... (4.10:1 ratio) ...................... 2376269• 1 59.7565-66 Ser. 20w leaf type springs ....... (41-9T) (4.56:1 ratio) .............. 23588460 1 59.7565-67 G-10 w % 3.36ratio (2nd design).... (37-11T)(3880044-3790628)......... 3886357 1 **65-68 Ser. 10, G-10-20 w/4-11 ratio
(exc. 4 WD) .................. (37-9T—hypoid)(3819037-3884937),,,, 3887833 1 49.2565-68 Ser. 10, G-10-20 w/3.73 ratio ..... (41-11T—hypoid)(3817778-3884935)... 3887831 1 53.30
NOTE: Axle Ratio = Ring gear . Pinion; 37 . 10 = 3.70 to 1.""NOTE: Indicates repeated number, see first listing for price.
5.531 SCREW—BOLT—KEY, Ring Gear
38-52 PASS. (exc. P.G.),53 SDL.,55-64 PASS.,56-68 CORVETTE,63-68 Ser. 10 (exc. 4/WD),63-68 Ser. 10 (4WD) (2nd Ser.),64-68 G-10-20,65-68 PASS . ......................... ('8-24 x 25/32 ) (used with lockwasher) .. 3884942 A.R. .1050-52 PASS. w/ P.G.,53 PASS. (exc. SDL.),53-55 CORVETTE,54 PASS .......................... ( %-24 x "/ 6 ) (stmp'd 55T" on head) ... 3691466 10 .1040-42 COMM.,46-62 ',z TON (exc. 1958 '/2 TON
w/P/Trac.),63 Ser. 10 (4/WD) (1st Ser.) ......... BOLT ('/e-24 x 31, ) .................. 3697704 12 .1040-55 UTILITY (1st Ser.),46-50 ',, 1 TON,60-68 Ser. 20-30 ...................... BOLT ('/z-20 x 2) .................... 3884943 12 .1546-55 2-SPD. w 'Vac. Shift (1st Ser.) .... BOLT, gears to case attach.
(9,16-18 x 5) ...................... 3682520 8 .9558-59 'i TON w/P/Trac ............... BOLT, gears to case attach.
('/,6 -20 x 27/3x)
...................... 2346842 10 .1560-68 4, WD,65-67 Ser. 10 w/leaf type springs BOLT, frt. axle, gear to case
(P /Trac.) ................... ( /-24 x "// a) ...................... 2402525 10 .15
65-66 Ser, 20 w/leaf type springs ...... BOLT (Dana 30266) .................. 2358877• 12 .1846-55 2-SPD. w/Vac. Shift (1st Ser.) .... KEY ................................ 3682541 1 1.10
5.533 PAD—SCREW—NUT, Ring Gear
38-55 UTILITY (1st Ser.),46-60 3 ;, 1 TON,59 Ser. 3A w 4/WD,67-68 Ser. 30 w/11,000 lb. axle......... thrust ............................. 370463 1 .5046-60 -,, 1 TON,67-68 Ser. 30 w'l1,000 lb. axle ......... SCREW, thrust pad ( 7
/8 -14 x 3'/4) ........ 3652255 1 .7040-55 UTILITY (1st Ser.),46-60 ';, 1 TON ...................... NUT, thrust pad screw (/e-14) ......... 124954 1 (8.916)
5.535 LUBRICANT, Hypoid Gear
ALL PASS., CORVETTE, ?i TONw'P,'Trac . ................... specialhypoid (1 quart container) .... 1050015* A.R.(8.800)
ALL PASS., CORVETTE, 12 TONw/P/Trac . ................... special hypoid (15 gal.)............. 1050016* A.R.(8.800)
65-67 PASS., CORVETTE, TONw/P/Trac . ................... specialhypoid (1 quart)............. 1050081 1 (8.800)
65-67 PASS., CORVETTE, ? TONw 'P /Trac . ................... special hypoid (15 gal.) ............. 1050527 1 (8.800)
"NOTE; To be used on models thru 1964.
5.529-5.535 4-1967
888Chevrolet Motor Division
General Motors Corporation
65-67 Ser. 10 w/leaf type springs ....... rear,64-68 4/WD .......................... front (Bower 25590-25523) ........... 941226260-63 4/WD .......................... w/roller (1"/ 6 I.D. x 3"/64 O.D.)
(Timken 25577-25523) ............. 941522463-68 CORVETTE .................... "U" joint yoke .................... 4551-2465-66 Ser. 20 w/leaf type springs...... w/roller (Timken 387A-382S)......... 941241164-67 G-10 w/3.36 ratio,65-67 PASS. w/ 10 bolt ring gear ....... (1/, x 2 57/64 O.D.) .................... 7451281
Not required in this group. Seegroups 6.311, 6.313............ (25/32 I.D. x 314 x 25/32 thk.) ...... 7451090
Not required in this group. Seegroup 6.313 ................... .................................... 7451226
39-55 2-SPD. (1st Ser.) ................ RACE, outer (Timken M 3920) ......... 45731946-55 2-SPD. w/Vac. Shift (1st Ser.) .... RACE, inner, w/roller (Timken X 3994) 43597358-59 'ii TON w/P/Trac.,60-64 4/WD .......................... RACE, outer (Timken 25523) .......... 941226758 %i TON w /P/Trac.,64 4/WD .......................... RACE, inner w/roller (Timken 25590) .. 941226660-63 4/WD .......................... RACE, inner w/roller (Timken 25577) ... 941522563-64 CORVETTE,63-64 Ser. 10,64 G-10 w/3.73, 4.11 ratio .......... RACE, outer ......................... 745114164 G-10 w/3.36 ratio ............... RACE, outer......................... 7451282
5.537 NUT -SHIM-SHIM UNIT-SPACER, Differential Bearing Adjusting
2 6.50
2 6.402 1.502 8.37
2 5.24
5.74
5.102 4.302 7.98
2 2.46
2 3.942 3.96
2 2.131 1.98
80
1.30
802.30
1.351.95
.12
5.536 BEARING-RACE, Differential Side
38-54 PASS. (exc. FA, FD),53-55 CORVETTE ................... (Hyatt A 11360) (Hy 11360 Z) ...... , , 127861* 2 8.65
*NOTE: Must be installed in sets of two on 1939-40 models.38-53 UTILITY,54-55 1'.? TON (exc. 2-SPD.) (1st Ser.),67-68 Ser. 30 w/11000 lb. axle ......... (Hyatt A 11820) (Hy 11820 Z)........ 1483997 2 14.35
NOTE: Must be installed as an assembly and in sets of two on 1938-39 models.40-42 COMM.,46-56 'z TON,55-56 PASS.,56 CORVETTE .................... (Hyatt CK 11445 X) ............... . 7450385 2 9.8557-59 Ser. 3Aw'4/WD ................ front axle,57-59 PASS., CORVETTE, '/ TON (exc,
', TON w/P/Trac.),60-62 PASS., CORVETTE, '/z TON,63-64 PASS.,63 Ser. 10 (4/WD) (1st Ser.) , , , . , , , , , (Hyatt A 159286 Z) ................. 7450745 2 5.9546-68 '-a, 1 TON (exc. 11,000 lb. axle) ... (Hyatt D 11786) (Hy 11786 Y),57-59 Ser. 3E-3G w/4/WD.. ............ front axle ......................... 188930 2 10.6654-55 2 TON (prod.) (1st Ser.).......... (Hyatt KC 11948Y) ................. 7450326 2 20.5763-68 CORVETTE, Ser. 10,63-68 G-10-20 w/3.73, 4.11 ratio,65-68 PASS. w/12 bolt ring gear ........ .................................... 7451140 2 5.9558 '2 TON w /P/Trac
38-42 COMM.,46-59 ',i TON (exc. P/Trac.),55-59 PASS.,56-59 CORVETTE,60-62 PASS., CORVETTE, Y= TON63-64 PASS.,63 Ser. 10 (4/WD) (1st Ser.) ......... (315,6 O.D. x 25/32 thick-12 slots) ..... 3707303 238-53 UTILITY,54-55 1'/ TON (1st Ser.) (exc. 2-SPD.),67-68 Ser. 30 w/11000 lb. axle ........ (41/ O.D.) (20/ ............... 357665 238-54 PASS.,53-55 CORVETTE ................... (3344 O.D. x 3
/4 thick-12 slots) ........ 3707301 239-55 2-SPD. (1st Ser.) .. . . . . . . . . . . . . . . (3'/B I.D.) .......................... 678416 246-59 ',', 1 TON,60-68 Ser. 20-30 (exc. 11000 lb. axle) ... (361/64 O.D.) ........................ 3664527 254.55 2 TON (prod.) (1st Ser.) ......... (2Y, I.D. x 4
13/32 O.D._14 slots) ....... 3702289 2
58-59 'z TON w/P/Trac.,60-63 4/WD .......................... SHIM (.003) .......................... 1784579 A.R.
i-1967
Chevrolet Motor DivisionGeneral Motors Corporation 889
5.536-5.537
58-59 1 2 TON w/P/Trac.,60-63 4 'WD .......................... SHIM (.005) .......................... 1784580 A.R. .1264-68 4/ WD.65-67 Ser. 10 w/leaf type sp rings,,,,,,, SHIM (.003) .......................... 2457068 A.R. .1064-68 4 -" WD,65-67 Ser. 10 w/leaf type springs ....... SHIM (.005) .......................... 2457069 A.R. .1064-68 4WD,65-67 Ser. 16 w 'leaf type springs....... SHIM (.010) .......................... 2457070 A.R. .1064-68 4 \VD,65-67 Ser. 10 w ,leaf type springs....... SHIM (.030) .......................... 2457071 A.R. .1065 CORVETTE,65 PASS. w/4 arm suspension ....... SHIM (.078) .......................... 3820423 A.R. .1565-66 Ser, 20 w/leaf type springs ....... SHIM (.003) (2 1 51 6 O.D. x 2 11/ 2 I.D.)
( Dana 30276-1) .................... 2358873S A.R. .1065-66 Ser. 20 w/leaf type springs ....... SHIM (.005) (2 15/ 6 O.D. x 2 11/32 I. D.)
( Dana 30276-2) ..................... 23588740 A.R. .1065-66 Ser, 20 w/leaf type springs ....... SHIM (.010) (2 15/ 6 O.D. x 2 M/32 I.D.)
(Dana 30276-3) ..................... 23588750 AR. .1065-66 Ser. 20 w"leaf type springs ....... SHIM (.030) (2 1 /, 6 O.D. x 2 1 1/ 2 I.D.)
(Dana 30276-4) .................... 2358876• A.R. .1063-68 CORVETTE, Ser. 10,65-68 PASS., G-10-20 w/12 bolt ring gear SHIM UNIT (.064, .066, .068) .......... 3851480 A.R. .8563-68 CORVETTE, Ser. 10,65-68 PASS., G-10-20 w/12 bolt ring gear SHIM UNIT (.070, .072, .074) .......... 3851481 A.R. .7563-68 CORVETTE, Ser. 10,65-68 PASS., G-10-20 w/12 bolt ring gear SHIM UNIT (.076, .078, .080) .......... 3851482 A.R. .8563-68 CORVETTE, Ser. 10,65-68 PASS., G-10-20 w/12 bolt ring gear SHIM UNIT, .082, .084, .086) .......... 3851483 A.R. .7563-68 CORVETTE, Ser. 10,65-68 PASS., G-10-20 w'12 bolt ring gear SHIM UNIT (.088, .090, .092, .094) ..... 3851484 A.R. .8564-68 G-10 w 3.36 ratio,65-68 PASS. (w '10 bolt ring gear) ....... SHIM UNIT (.064, .066, .068, .070) ..... 3853759 A.R. .7564-68 G-10 w 3.36 ratio,65-68 PASS. (w '10 bolt ring) ........... SHIM UNIT (.072, .074, .076, .078) ..... 3853760 A.R. .7564-68 G-10 w ' 3.36 ratio,65-68 PASS. (w/10 bolt ring gear) ...... SHIM UNIT (.080, .082, .084, .086) .... 3853761 A.R. .7564-68 G-10 w 3.36 ratio,65-68 PASS. (w/10 bolt ring gear) ...... SHIM UNIT (.088, .090, .092, .094) ..... 3853762 A.R. .8064-68 G-10 w %3.36 ratio,65-68 PASS. (w '10 bolt ring gear) ....... SHIM UNIT (.096, .098, .100) .......... 3853912 A.R. .7565-68 PASS., CORVETTE (w/12 bolt
ring gear),65-68 Ser. 10, G-10, G-20 (w12 bolt
ring gear) .................... SHIM UNIT (.096, .100) ............... 3876174 A.R. .7567-68 G-10 w 3.36 ratio,67-68 PASS. w /10 bolt ring gear ........ SHIM UNIT (.052, .056) ............... 3907088 A.R. .8567-68 G-10 w'3.36 ratio,67-68 PASS. w,/ 10 bolt ring gear ........ SHIM UNIT (.058, .062) ............... 3907089 A.R. .8567-68 PASS., CORVETTE, Ser, 10,67-68 G-10-20 w/12 bolt ring gear....... SPACER, diff. bearing ............... 3902522 A.R. .7567-68 PASS.,67-68 G-10 w 3.36 ratio (10 bolt ring gear) SPACER, diff. bearing ................ 9775809 A.R. .47
5.539 LOCK-BOLT, Differential Bearing Adjusting Nut
38-54 PASS.,53-55 CORVETTE .................... ( 2 %6 4 dia. hole) ..................... 472539 2 .1038-53 UTILITY,46-68 ' 1 TON (exc. 2-SPD.),46-55 1'; TON (let Ser.) (exc. 2-SPD.)... (214 dia. hole) ..................... 345672 2 .1054-55 2 TON (prod.) (1st Ser.) ......... (1/8 wide x 4°/ b long-curved)......... 3702249 2 .1055-62 PASS., '/z TON,55-62 CORVETTE,63 Ser. 10 (4/WD) (1st Ser.),63-64 PASS.......................... dia. hole) ( ^3x )..................... 3705726 2 . 10
39-55 2-SPD. (1st Ser.) ................ BOLT, adjusting nut lock ( 5; 6-18 x'/ 6 ) , 3652345 4 .10
5.537-5.539
A-1967Chevrolet Motor Division
890 General Motors Corporation
2 .152 .95
2 .95
2 .51
2 .35
2 .562 .70
2 .752 .50
2 .20
2 .30
2 .25
5.542 WASHER, Differential Pinion Thrust
39-55 2-SPD. (1st Ser.) ............... (7/9 I.D. x 1 /32 O.D.) ................ 368252252-55 2 TON (1st Ser.) (exc. 2-SPD.),67-68 Ser. 30 w ' 11000 lb, axle ......... (7/9 I. D. x 1 3hi32 O.D.) ................ 369774360-68 4 WD,63-64 CORVETTE w/P/Trac.,64 G-10 w/P/Trac., 3.55 ratio,65-68 PASS. w/P/Trac., 3.08, 3.36,
3.55, 3.70 ratio,65-68 G-10 w/P/Trac., 3.36 ratio,65-66 Ser. 10 w/leaf type springs (g944 I.D. x 1 2 '/ 2 O.D.) (front axle on
(exc. P/Trac.) ................ 4/WD) (Dana 1 3338-3)............. 234684862 Ser. 10 w/P/Trac ................ ( "/6 I. D. x 1 13
/ 6 O.D.) (dished) ....... 3828789
63-64 Ser. 10, G-10 w/P/Trac., 3.73ratio,
65-68 PASS. w/3.07, 3.31, 3.55, 3.73,4.10, 4.56, 4.88,
65-68 Ser. 10 w/P/Trac., 3.73 ratio,65-68 G-10-20 w/PjTrac., 3.73, 4.11 ratio (1"/,, O.D. x 1 3 6 I.D.) (Eaton 92995) .. 383067364-66 Ser. 10, G-10 w/P,/rrac., 3.73 ratio,67 Ser. 10 (4/WD) w/P%Trac. ........ (123/32 O.D. x' 3
/44 I.D.) (Dana 32265) ... 384991064 CORVETTE, G-10 (exc. P/Trac.),65 CORVETTE (exc. P/Trac.),65 G-10 w/3.36 ratio (exc. P/Trac),65 PASS. w/10 bolt ring gear (exc.
P'Trac.) .................... (1 %4 O.D. x 3/4 I. D.) ................ 3843266
64-65 Ser. 10 (D-D, 4/WD) (2nd design),64-65 Ser. 10 (2nd design) (exc. D-D,
4/WD, P/Trac.),64-65 G-10 w/373, 4.11 ratio (2nd
design) (exc. P/Trac.),65 PASS. w/12 bolt ring gear (exc.
P/Trac.) ..................... ( "/a4 I.D. x 1 5 44 O.D.) ............... 385299165-66 PASS. w/P/Trac., 3.07, 3.31,
3.55, 3.73 ratio,65-67 PASS. (P/Trac., w/2.73, 4.10,
4.56, 4.88 ratio) (8 cyl.)........ (12732 O.D. x 53/64 I.D.) (Dana 33269) ... 3869307
64-68 CORVETTE w/P/Trac.,65-68 PASS. w,'P!Trac., 3.08, 3.36,
3.55, 3.70 ratio,
4 .45
4 .40
2 .25
2 .35
65-68 G-10 w/P/Trac., 3.36 ratio ....... (Eaton ED 92888) .................. 9778352 2 9565-66 Ser. 20 (leaf type springs w/4.10,
4.56 ratio) (exc. P/Trac.) ..... (127/2 O.D. x 57/64 I.D.) (Dana 30265) ... 2358884• 2 15
66-68 Ser. 10 (exc. P/Trac.),66-68 G-10-20 w/3.73, 4.11 ratio
(exc. P!Trac. ),66-68 PASS. w '12 bolt ring gear
(exc. P/Trac.) ................ .................................... 3880141 2 2566-68 CORVETTE (exc. P/Trac.),66-68 G-10-20 w/3.36 ratio (exc.
P /Trac. ),66-68 PASS. w/10 bolt ring gear (exc.
P'Trac.) ..................... .................................... 3880143 2 25
5.543 WASHER, Differential Side Gear Thrust
39-46 2-SPD. w/Mech. Shift ........... , (2/32 I.D. x 4 O.D.) ................. 07898846-53 2-SPD. w/Vac. Shift ............ (24 I. D. x 3
9/,9 O.D.) ................ 3682527
52-55 2 TON (1st Ser.) (exc. 2-SPD.),67-68 Ser. 30 w'11000lb. axle ......... .................................... 369774454-55 2-SPD. w/Vac. Shift (1st Ser.) .... (2Yz I.D. x 3 9
/ 6 O . D .) ................ 2099520
57-68 PASS., CORVETTE, G-10 w/10boltring gear, (exc. P;Trac.) ... .................................... 3748258
60-67 4/WD,65-67 Ser. 10 w/leaf type springs front axle (2 13
/ 6 O.D. x 1 49
44 I. D.)
(exc. P/Trac.) ................ (Dana 17877) .................... 234684964-68 G-10-20, Ser. 10 (exc. P/Trac.),65-68 PASS. w/12 bolt ring gear ........ .................................... 3846425
-1967Chevrolet Motor Division 5.5.42-5.543General Motors Corporation 891
gear,65-68 G-10-20 w'12 bolt ring gear,65-68 PASS. w 12 bolt ring gear , , , , , , , , w /deflector (3 2 7/ 2 dia.) , , , , , , , , , , , , , , 387897266-68 Ser. 20-30 w : 11,000lb. axle ...... w/deflector ........................ 388067066-68 PASS. w!T.H . .................. w/deflector (4 5 -; 4 dia.)............... 387920841-55 UTILITY (1st Ser.) (exc. 2-SPD.),46-63 'a, 1 TON ..................... DEFLECTOR (2/a I.D. x4 2 1/ 4 O.D.).,,,, 366316255-59 PASS., '
4 TON (exc. 1/2
TONw!P/Trac. ),
56-59 CORVETTE,60-62 PASS., CORVETTE, 4 TON,63-64 PASS.,63 Ser. 10 (4,/WD) (1st Ser.) , , , , , , , , , DEFLECTOR (1'/8 I.D. x 3'/2 0.D.). , , , , , , 371478858-59 '2 TON w/ P; Trac,, DEFLECTOR, pinion flange (front on60-63 4/ED .......................... 4/WD) ............................ 40922560-68 4i WD .......................... DEFLECTOR, transfer case mainshaft
1 5.951 10.951 5.85
1 .40
1 .42
0 15
65-66 Ser. (leaf type springs w/4.10,4.56 ratio) (exc. P/Trac. ...... (3'/a O.D. x 2% I.D.) (Dana 30264) .... 2358885• 2 .30
68 4 ED .......................... front axle ( 2 13/ 6 x 1 /e4 I.D.)
(Dana 32132) .................... 2236254 2 .45
5.545 FL A NGE— DEFLECTOR—SPACER—WASHER—SLINGER, Propeller Shaft Pinion
41-53 2-SPD .......................... w/deflector (stamped 3897-X-336).... 3657342 1 15.4541-53 UTILITY (exc. 2-SPD.),41-65 ',, 1 TON , , , , , , , , , , , , , , , , , , , , , , w/deflector (forged 3657003) (2nd46-55 UTILITY (prod.) (1st Ser.). , , , , , , , type on DR, DS),57-69 Ser. 3E-3G w'4,WD .............. front axle ......................... 3663176 1 10.9554-55 2 TON (1st Ser.) (exc. 2-SPD.) .... w/deflector (forged 3703715) ......... 3703716 1 10.9554-55 2-SPD. (1st Ser.) ................ w/deflector (forged 3703733)......... 3703734 1 16.7055-59 PASS., '2 TON (exc. % TON
w'P'Trac.),57-59 CORVETTE,60-64 PASS., CORVETTE, ',2 TON, G-10 w/deflector ........................ 3741822* 1 5.95
*NOTE: On all models from 1954-1962, and 1963-1964 pass. it is necessary to replace3714788 Deflector with 3819415 Deflector.
58-59 '2 TON w,'P%Trac ................ w/deflector ........................ 3817647 1 8.9060-65 4 'WD,65-66 Ser. 10 w 'leaf type springs ....... w/deflector (Dana 2-4-2281) .. , ...... 2403641 1 10.3564-68 G-10 w 3.36 ratio,65-68 PASS. w 10 bolt ring gear ........ w/deflector ........................ 3878968 1 5.4065-66 Ser. 20 w 'leaf type springs...... w/deflector (Dana 3-4-4181X)........ 2436467• 1 11.7565-68 Ser. 10, CORVETTE w'12 bolt ring
oil seal (1 i, I.D. x 2') O.D.) ......... 2410240 163-68 CORVETTE,63-68 Ser. 10 (exc. 4/WD),63-68 Ser. 10 (4 /WD) (2nd Ser.),64-68 G-10-20 (exc. 3.36 ratio),65-68 PASS. w 12 bolt ring gear ........ DEFLECTOR, pinion flange 3918415 1ALL ALL w/2% splined end prop. DEFLECTOR, shaft pillow block yoke
shaft,,,,,,,,,,,,,,,,,,,,,,,, (2% I.D.x3%O.D.x'/boffset),,,,,,, 3819016 264-68 Ser. 20-30 w'sgl, spd. axle ....... DEFLECTOR, pinion flange (2 3/4 I.D. x
3 ' 1/%a O.D.) ......................... 3826135 164-68 G-10 w 3.36 ratio ............... DEFLECTOR, prop. shaft pinion flange65-68 PASS. w/10 bolt ring gear , , , , , , , , (3342 O.D. x 1
4'4 4 LD.) ............... 3832398 1
65-66 Ser. 20 w/leaf type springs....... DEFLECTOR, prop, shaft pinion flange(3' s/, 6 O.D. x 234 6 I.D.) ............... 24364680 1
46-60 '_, 1 TON ...................... SPACER, flange,57-59 Ser. 3E-3G w,/4,/WD, , , , , , , , , , , , , , frt. axle flange (2 I.D. x 2% O.D. x'/ 6 ) 3682152 139-40 VF, WD w/2-SPD.,41-55 2-SPD. (1st Ser.) , , , , , , , , , , , , , , , , WASHER, flange (1'/32 x 1'/ex'/q thick) , , , , , 2277315 140 ED.41-55 UTILITY (1st Ser.) (exc. 2-SPD.),46-65 ',, 1 TON,67-68 Ser. 20-30 ...................... WASHER, flange (2 1
/6 x 1 563 3 x "/6 , thk.) .. 3725866 153-55 CORVETTE .................... WASHER, dr. ( 1 54 6 0.D. x 3/a I.D. x'/3z thk.) 513716 155 PASS., '/z TON (1st design), WASHER, flange ( 29/3 2 I.D. x 1% O.D. x%257-59 Ser. 3Aw/4/WD,,,,,,,,,,,,,,,,, thick) ............................. 3705782 1
22
.25
.63
.40
.37
.40
.30
.40
3020
40
5.543 -5.545 3/_ 1967Chevrolet Motor Division
892 General Motors Corporation
65-66 Ser. 20 w leaf type springs ....... WASHER, drive pinion slinger nut (l'O.D. x 39/ 4
I. D. x !) thk.) (Dana 30275) 23530150 1 .1065-66 Ser. 20 w 'leaf type springs ....... WASHER, pinion brg, spacer (Dana 30982) 2442778• 1 .1558-59 ' 2 TON w Trac.,60-68 4 WD,65-67 Ser. 10 wjleaf type springs ....... SLINGER, drive pinion oil (Dana 30180). 2346834 1 .2065-66 Ser. 20 w/leaf type springs ....... SLINGER, drive pinion oil ( 1/8
I. D. x93,O.D. x 6 4 thk.) (Dana 30273) ......... 2353014* 1 .20
5.548 U-JOINT ASSEMBLY-REPAIR KIT, Universal
NOTE: Nos. following model usages are forged on the frt. and rear yokes respectively. Alsosee groups 4.404 and 4.405 for Universal Joint attaching parts.
40-47 ' TON w/3-SPD . ............... (3653057 Frt,-3665768 Rr.) ...... , ... 606779 1 13.2540-47 ?z TON w 4-SPD ................. (3658724 Frt.-3665768 Red Stripe Rr.) 609531 1 16.0041-53 3
4 TON w/3-SPD ................. front (591648 Frt.-596911 Rr.)....... 591646 1 13.75
48-54 'z TON w 3-SPD.,49-54 PASS. (exc. P.G.) ............... front (591644 Frt.-3665768 Rr.)...... 591642 1 12.8548-54 =. TON w 4-SPD ................. front (3686323 Frt.-3665768 Rr.) ..... 3689266 1 16,0050-54 PASS. w.P.G . .................. (3703214 Frt.-3665768 Rr.).......... 3704232 1 13.1538-39 COMM., UTIL. w/4-SPD. (exc.
VE, VF) ..................... REPAIR KIT, front and rear,40 COMM., UTIL. (exc. KC, WD) • .... front (consists of 1 trunnion, 4 brgs.,41-53 'i TON (exc. D-D) ............... 4 brg. ring s ) 609948 A.R. 6.1540-54 PASS., -- TON .................. REPAIR KIT (consists of 1 trunnion,
4 brgs., 2 snap rings, 4 hex. hd.bolts and 2 lock plates) ............ 609944 1 5.20
41-59 '), 1 TON,41-55 UTILITY,55-59 ' 1 TON w 'H.D., 4-SPD„60-63 Ser. 10 thru 30,64-68 Ser. 20-30,64-68 Ser. 10 (4 WD) w - 3-SPD. (exc.
H.D. i,64-68 Ser. 10-20 w/H.D. 3-SPD. (exc.
4 'WD),64-68 Ser. 10-20 w'4-SPD., T.H......... REPAIR KIT, rear, all joints (finger dia.,67-68 Ser. 20 (4 WD) .................. .773) (Spicer 5-143X) ( 3 °/3 2 O.L.) .... 3708961 1 8.7054-55 2 TON (1st Ser.) ................ REPAIR KIT, front, rear and inter.
(finger dia. .775) ............... ... 3707830' A.R. 8.7555-65 'z TON (exc. SUB, 4/W.D.),55-59 Ser. 10 (SUB) w/114 W.B. (exc.
4'W.D.),55-63 PASS., TAXI, CORVETTE,55-66 '; TON,60-62 Ser. 10 (SUB) w/115 W.B. (exc.
4 /W.D.),
1Chevrolet 5.545-5.548Chevrolet Motor DivisionGeneral Motors Corporation 893
REPAIR KIT, U-joint (w/o grease fitting),
rear U-joint,
64-68 CORVETTE,64-68 PASS.,64-66 Ser. 10 (SGL. UNIT) w/115 W.B.
(exc. 4,'WD, 4-SPD. H.D.),65-66 Ser. 10 (D-D) w/H.D. 3-SPD.,
4-SPD.,65-66 Ser. 10 (115 W.B. w4.11 ratio)
(283) (exc. 4/WD, 3-SPD. H.D.,4-SPD., SGL. UNIT) ...........
66-68 Ser. 20 (D-D) (104 W.B. w /3-SPD.)(exc. H.D.),
66 Ser. 20 (D-D) (104 W.B. w/3-SPD.)exc. H.D.),
67-68 Ser. 10 w'4-SPD. (exc. 4/WD),67-68 Ser. 20 (D-D) w/104 W.B. (Muncie
3-SPD., P.G.) .................66 PASS. (exc. T.H.),66 Ser. 20 (4/WD) (exc. 4-SPD.),66 Ser. 20 w/3-SPD. (exc. H.D.,
4 'WD, 104 W.B.),67-68 Ser. 10-20 (exc. D-D, 4/WD,
4-SPD., T.H.),67-68 Ser. 10-20 (D-D) (3-SPD., P.O.)
(exc. 104 W.B.),67-68 G-10-20 ........................ frt. and intermediate. . . . . . . . . . . . . . . . 3889690- A.R. 5.9566-68 PASS. w'T.H . .................. REPAIR KIT, front U-joint ............ 5677659A 1 10.4066-68 PASS. w T.H . .................. REPAIR KIT, rear U-joint............. 5698221♦ 1 9.7067-68 Ser. 10-20 (4; WD) ............... REPAIR KIT, (incl. yoke and seal) (aux.
frontprop.) ........................ 3912106 1 19.5068 CCRVETTE w T.H . ............ REPAIR KIT, U-joint ................. 390133 1 9.20
ANOTE: Use only with prop shaft assy. 5697871 for 1966.-NOTE: Consists of 1 trunnion, 4 brgs., 4 snap rings, 2 "U" bolts, 4 washer and 4 nuts.*NOTE: Consists of 1 trunnion, 4 brgs., 2 snap rings, 2 "U" bolts, 4 washers, 4 seals and 4 nuts.
5.555 YORK—YOKE ASSY.—FLANGE—NUT ASSY., Universal Joint and Transfer Case
39-40 VE, VF, WD ...................51-53 ALL w/Prop. Brake,54-55 ALL w/Prop. Brake (1st Ser.) (exc.
2-TON),55-59 '/, TON w/Prop. Brake (2nd Ser.),55-56 1 TON, (2nd Ser.)'(exc. H.D.),57-59 1 TON,57-59 Ser. 3A w/4WD,60-65 Ser. 20 w/3-SPD. H.D., 4-SPD.
(exc. 4/WD, D-D),60-62 Ser. 20 (D-D),60-66 Ser. 30,63-66 Ser. 20 (D-D) (125, 137 W.B.
w 3-SPD. H.D., 4-S PD.),67 Ser. 30 w, 11,000 lb. axle (exc.
4 WD) .......................57-59 Ser. 3E-3G w/4/WD ..............
front,frt. and aux. (drum flange) (forged
131) (4" bolt circle) ..............
front and rear, flange,
40-47 PASS., '2 TON w/3-SPD.,48 PASS . ......................... front (forged 3653057 or 3657543) ...
*NOTE: Yoke identified by No. 3653057 has 1) dia. shoulder.40-54 PASS., '2 TON w/3-SPD.,54 PASS. w/P.G.,54 TON w' H.T.,54-55 TON w. H.D. (1st Ser.) ......... rear (forged 3665768) ...............40-47 TON w 4-SPD ................. front (forged 3658724)..............41 -53 ': TON w/3-SPD . ............... front (forged 3652866) ..............40-54 ' 2 TON w/4-SPD . ............... rear (red paint stripe) ...............48-54 , TON w'3-SPD. H.D.,49 -54 PASS. (exc. P.G.) .............. front (forged 591644)................48-54 =_ TON w 4-SPD ................. front (forged 3686323)...............50-54 PASS. w'P.G ................... front (forged 3703214) ..............
080384 A.R. 8.50
3653057* 1 3.49
3665768 1 4.753658724 1 4,25
591648 1 4.653681934 1 5.15
591644 1 4.203686323 1 5.40
3703214 1 3.49
5.548-5.555 ^-1967Chevrolet Motor Division
894 General Motors Corporation
54-55 '/, TON w/3-SPD. (1st Ser.)(exc. H.D.),
54-55 1'/ TON w/2-SPD. (1st Ser.),54-55 2 TON (1st Ser.) ................ front (drum flange) (4 1/2 " bolt circle)... 3707776 1 7.0054-55 %, 1 TON w/3-SPD., H.D. (1st
Ser.) ......................... front (forged 3845022) ............... 3845092 1 7.5041-53 3/4 , 1 TON, UTILITY ............. assy. w/sleeve, rear prop. shaft.55 Yz TON w/H.D., 4-SPD. (1st Ser.),57-59 Ser. 3A w/4/WD ................. trans. to transfer case,57-59 Ser. 3E-3G w/4/WD .............. transfer case to trans. and frt. axle,60-62 4/WD .......................... front (stamped 3657106),65-66 Ser. 10-20 (4/WD) w/4-SPD. ...... assy. w/sleeve, front prop. shaft ..... 3882330 1 9.9554-55 3/,, 1, 1'4 TON (1st. Ser.) (exc.
2-SPD. ),55 M, J w/H.D., 4-SPD. (2nd Ser.),55 D-D, 1 TON (2nd Ser.) (exc. F),56-59 Ser. 3B-3E w/H.D., 4-SPD.,56-59 D-D, 1 TON (exc. Ser. 3C),60-66 Ser. 20 (exc. 3-SPD., D-D, 4/WD),60-64 D-D (exc. 104 WB),60-64 Ser. 30 (exc. D-D), assy. w/sleeve, rear65-68 Ser. 30 (exc. 4/WD),65-68 Ser. 20 (D-D) (exc. 104 W.B.),65-68 Ser. 20 w/H.D. 3-SPD.
4-SPD. (exc. 4/WD, D-D) ,67-68 Ser. 20 (4/WD) (8 cyl.) ........... (16 splines-6"/ 6 O.L.) .............. 3707214 1 12.0054-55 S (1st Ser.) ..................... assy. w/sleeve, front ............... 3707215 1 15.6554-55 2 TON (1st Ser.) (exc. S),54-55 1'4 TON w/2-SPD. (1st Ser.)...... assy. w/sleeve, rear ................ 3707216 1 10.5055-63 PASS. (exc. Muncie trans.),55-59 z TON (exc. H.D., 4-SPD.),55-59 ?i4 TON (exc. prop. brake)......... assy. w/sleeve front,60-64 Ser. 10-20 w/3-SPD. (exc. D-D,
H.D., 4/WD),60-62 Ser. 20 (D-D) (3-SPD. w/104 W.B.)
(exc. H.D.) ................... prop. shaft and U-joint,60-64 Ser. (D-D) w/3-SPD. (exc. H.D.),61-62 Ser. 10-20 w/P.G. (exc. 115 W.B.),64 PASS. w/P.G.,65-66 Ser. 10-20 w/3-SPD. (exc.
H.D., O.D.),67-68 Ser. 10-20 w/Muncie 3-SPD. (exc.
4/WD) ....................... frt. prop. shaft front yoke (15/665 Ser. 10 w/leaf type springs (exc.
P/Trac., O.D.) ................ dia. bore (16 splines-5'9/64 O.L.) ..... 3707059 A.R. 6.7055-59 H, Ser. 3A w/HD., 4-SPD.,55-59 F, Ser 3C w/prop. brake,55-59 J, Ser. 3E w/H.T ................ assy. w/sleeve, front,60-64 Ser. 10 (115 W.B. w/3-SPD. H.D.,
4-SPD.) (exc. 4/WD),60-64 Ser. 20 (D-D) w/104 W.B. (exc.
3-SPD.),60-67 Ser. 30 (D-D) w/104 W.B.,65-68 Ser. 10 w/3-SPD. H.D., 4-SPD.
(exc. 4/WD, 127 W.B.),65-67 Ser. 20 (D-D) (104 W.B. w/3-SPD, frt. pump, shaft and U-joint
H.D., 4-SPD . ................. (16 splines-7% O.L.) ............ 3718646 11 14.5055-62 CORVETTE (8 cyl.) ............. front .............................. 3712379 1 9.0058-64 PASS.,64 Ser. 20 (exc. D-D, 4/WD),64-66 Ser. 10 (3-SPD. w/115, 127 W.B.)
(exc. 4/WD, H.D.),65-66 Ser. 20 w/3-SPD. (exc. H.D.,
4/WD, D-D),67-68 Ser. 10-20 w/115, 127 W.B. (exc.
4-SPD., 4/WD) ................ front shaft rear yoke (cast 3740097)... 3740097 1 4.6057-59 Ser. 3A w/4WD ................. aux.front ......................... 3750692 1 14.4057-59 Ser. 3A w/4/WD ................ transfer case drive shaft frt......... 2384943 1 14.9557-59 Ser. 3A w/4/WD ................ transfer case drive shaft rear ....... 2352366 1 13,8557-59 Ser. 3E-3G w/4/WD ............. transfer case drive shaft frt. and rear . 2352389 2 16.7557-59 Ser. 3 w/4/WD .................. U-joint sleeve, all locations,60-67 Ser. 20 (4/WD) . . . . . . . . . . ........ rear prop, shaft and U-joint .......... 2067521 A.R, 17.25
©-1967Chevrolet Motor DivisionGeneral Motors Corporation 895
5.555
60-63 Ser, 10 w/3-SPD. H.D., 4-SPD.,P,G. (127 W.B.),
63-68 Ser, 10 (127 W.B. w/3-SPD.,H,D., 4-SPD.) (exc. 4/WD),
67 Ser. 10 (8 cyl.) w!3-SPD.,4-SPD. (exc. D-D, 4/WD),
67-68 Ser. 10 (4 WD) w'127 W,B. (8 cyl.)67 Ser. 20 (4/WD) ..................67-68 Ser, 10-20 (4/WD) ...............68 Ser. 30 w 11,000 lb. axle ... , .... .57-59 Ser. 3A w/4/WD .................64-66 Ser. 10 (4/WD) w/127 W.B. ...... .60-66 Ser. 10 (4 WD) ..................60-66 Ser. 20 (4 (WD),66 Ser. 10 (4WD) ..................60-66 4/WD YOKE ASSY . ............. .67-68 Ser. 10 (4/WD) .................60-68 Ser. 20 (4/WD) ..................
1 8.45
1 8.40
1 9.25
1 22.051 9.75
1 9,751 10,501 8.90
1 15.501 28.501 22,00
1 25.501
1 6.25
rear prop shaft and U-joint........... 3763340 1 11.90U-joint ............................ 2334834 1 5.75U-joint, centering, aux. front ......... 3903711 1 15.00U-joint ............................ 3914967 A.R.
YOKE ASSY., aux. frt. and rear prop.shaft,rear,aux. frt. and rear prop. shaft U-joint,
U-joint ............................ 3882328 1 10.30u/deflector(Timken) ................A1-3897-A-1431 ................... 2410237 A.R. 13.85
YOKE ASSY., w/deflector (TimkenA-3897-Q-1655) .................... 2410238 1 18,35
61-63 4/WD w/3-SPD ................. YOKE ASSY., frt. prop, shaft and U-joint 3798170 1 6.2063 CORVETTE (exc. Muncie 4-SPD.),64 CORVETTE w,'P.G .............. YOKE ASSY., front U-joint ............ 381891663 CORVETTE w/Muncie 4-SPD.,64 CORVETTE (exc. P.G.),65-68 CORVETTE (exc. T.H.).......... YOKE ASSY., front U-joint ............. 386872863-64 PASS., w,/Muncie trans.,64-65 G-10 (1st design),65-67 Ser. 10 w O.D.,65-68 PASS. (exc, T.H.),67-68 Ser. 20 (D-D) (P.G. w/6 cyl.),67-68 Ser. 10-20 w/115, 127 W.B. (exc, YOKE ASSY., U-joint sleeve yoke
4-SPD., T.H., 4/WD)........... (27 splines) ....................... 386864965-66 PASS. w'T.H.,66-68 Ser. 20-30 w/T.H . ........... . . . . YOKE ASSY., U-joint 22.75 sleeve yoke67-68 Ser. 10 w 115, 127 W.B. (T.H.) .... (splines) .......................... 387111565 G-10 (1st design) ................ YOKE ASSY., U-joint sleeve (16 splines) 386809565-66 G-10 (2nd design),67-68 G-10-20 ........................ YOKE ASSY., U-joint................. 388553066 PASS. w 'T.H . .............. . . . . YOKE ASSY., prop, shaft.............. 569787467-68 CAPRICE w,/P.G . ............... YOKE ASSY., w/dampener front U-joint . 389583367-68 Ser. 10 (4 /WD) .................. YOKE ASSY., front U-joint sleeve,67-68 Ser, 10-20 (4/WD) ............... aux,front ......................... 390370667 CAPRICE wT.H . .... . ........ . . YOKE ASSY., front U-joint sleeve ... , .. 569983267-68 PASS. w/T.H. (exc. CAPRICE) ... YOKE ASSY., front U-joint sleeve ...... 780155167-68 4 /WD .......................... YOKE ASSY., w/deflector (Timken
A-3897-C-2811) .................... 391217668 CORVETTE w/T.H . ............. YOKE ASSY., U-joint sleeve front ...... 393082741-47 AN, Y, BN, M, 0, DS, P, ES, Q .. , FLANGE, front (at trans.) (ident. daub
orang e pa int ) ...................... 59117241-42 1 TON, UTIL. (exc. YU, MU)41-53 '; TON ..................... . ... FLANGE (at hanger) (stamped 3657394)41-47 AN, BN, DS, ES ................. FLANGE, frt. prop. w/dust shield (use41-47 UTIL. (exc. YU, MU, OH, PP, QP .. w/dbl, row brg.),42 MT ............................ inter, prop. (forged 3657394).........48-50 UTILITY,48-55 1 TON w!4-SPD, (1st Ser.),54-55 '/a TON w/4-SPD. (1st Ser.),55-64 '4 TON w/3-SPD. H,D., 4-SPD.
(2nd Ser.),60-64 Ser. 20-30 w/3-SPD. H.D..,
4-SPD.,65-66 Ser. 10-20 w/4-SPD.,66 Ser. 10-20 w,'3-SPD. H.D.,65 Ser. 20-30 (exc. D-D, 4/WD),67 Ser. 10 thru 30 (exc. 4/WD, 11,000
lb. axle) ..................... FLANGE, front U-joint ................48-50 ALL w/tru-stop brake............ FLANGE, front ......................48-53 1 TON, UTILITY (exc. short COE) . FLANGE, frt. prop. w/deflector,48-53 2 TON (SBC) .................. inter,, w/deflector ..................
3657394 1 500
3680420 1 5.25
591700 1 7.05591718 1 11.05
3686940 1 8.40
5.555 Y_1967896
Chevrolet Motor DivisionGeneral Motors Corporation
51-54 ALL w/Prop. Brake,55 COMM., UTIL. w/4-SPD. (1st Ser.)
(exc. '2 TON),55-59 Ser. 3 w/4-SPD. (2nd Ser.) (exc.
TON),55-59 ',a, 1 TON w/H.D. 3-SPD.,60-64 Ser. 20-30 w/3-SPD. H.D.,
4-SPD. (exc. 4/WD),60-64 Ser. 20-30 w/3-SPD. H.D.,
4-SPD. (exc. 4/WD) ............65-66 Ser. 30 (exc. A.T.) ..............54-55 X, 2 TON (SBC) (1st Ser.) ........54-55 "a, 1 TON w/H.T. (1st Ser.).......55-62 ALLw/H.T. (2nd Ser.) (exc.'/Z TON)57-59 ALL w/4/WD ...................65-67 Ser. 20 w/4-SPD. (exc. 4/WD),67 Ser. 30 (exc. close ratio 4-SPD.,
FLANGE, front (retains speedo.,drive gear, front of drum .............
FLANGE, front (forged 3705183) .......FLANGE, front ......................FLANGE, front ......................FLANGE, transfer case input mainshaft
yoke and front axle drive ............
591607 1 8.153705182 1 11.003707632 1 5.503716756 1 6.55
2384944 A.R. 14.95
11000 lb. axle) ................ FLANGE, front U-joint................ 2450325 1 8.0567 Ser. 30 w/11,000 lb. axle ......... FLANGE, front U-joint ................ 3830567 1 7.9068 Ser. 30 w/11000 lb. axle ......... FLANGE, frontU-joint ................ 3866674 1 10.5068 Ser. 20-30 (exc. H.D. 4-SPD., T.H.,
11,000 lb. axle) ............... FLANGE, front U-joint ................ 3915056 1 8.5067 Ser. 30 w/11,000 lb. axle ......... NUT ASSY., U-joint front flange lock ... 3830575 1 1.25
5.556 PLUG—WASHER—SEAL —CAP—NUT, Universal Joint Sleeve Yoke
ALL ALL w/1"/ 6 " dia. hole ...........60-66 Ser. 10 (102, 115 W.B. w/H.D.
3-SPD., 4-SPD.) (exc. 4/WD),60-66 Ser, 20 (D-D) (104 W.B. w/H.D.
3-SPD,, 4-SPD.),60-66 Ser. 30 (D-D) w/104 W.B ..........60-66 Ser. 10 (127 W.B. w/H.D. 3-SPD.,
4-SPD.) (exc. 4/WD),60-66 Ser. 20 w/H.D. 3-SPD., 4-SPD,
(exc. D-D, 4/WD),60-66 Ser. 20-30 (D-D) w/125 W.B.,60-66 Ser. 30 (exc. D-D),65-66 Ser. 10-20 (4/WD),65-66 Ser. 10 w/leaf type springs (exc.
P/Trac.),67-68 Ser. 10 (115 W.B. w/4-SPD. trans.)
(exc. 4%WD),67-68 Ser. 10 (D-D) w/4-SPD. trans.,67-68 Ser. 20-30 (D-D) (104 W.B.
w/4-SPD. trans.),67-68 Ser. 20 (4/WD),67-68 Ser. 10 (4/WD) w/127 W.B. (8 cyl.)66 Ser. 10 (4/WD),67-68 Ser. 10 (4/WD) w/115 W.B.,67-68 Ser. 10 (4/WD) (127 W.B. w/6 cyl.)66-68 Ser. 10-20 (4/WD) ...............
dust .............................. 3723361 A.R. .06
yoke front,
rear .............................. 087008 1 .10
rear,aux. frt ............................ 080390 1 .06
©-19675.555-5.556Chevrolet Motor Division
General Motors Corporation 897
39-40 VE, VF, WD,41-53 3/4 , 1 TON, UTILITY,54-55 S (1st Ser.),55 H, F w/H.D., 4-SPD.,55 F, J w/H.T. (2nd Ser.),56-59 Ser. 3A-3C w/H.D., 4-SPD.,56-59 Ser. 3C-3E w/H.T.,57-60 4/WD,60-66 Ser. 10 (w/3-SPD. H.D., 4-SPD.)
(exc. 4/WD, 127 W.B.),60-66 Ser. 20 (D-D) (104 W.B. w/3-SPD.
H.D., 4-SPD., H.T.),60-66 Ser. 30 (D-D) w/104 W.B.,65 Ser. 20 w/leaf type springs (exc.
P,'Trac. ),65-66 Ser. 10-20 (4/WD),67-68 Ser. 10 (115 W.B. w/4-SPD. trans.)
(exc. 4/WD),67-68 Ser. 10 (D-D) w/4-SPD. trans.,67-68 Ser. 20-30 (D-D) (104 W.B. w/4-
SPD. trans.),67-68 Ser. 20 (4/WD) ..................67-68 Ser. 10 (4/WD) w/127 W.B. (8 cyl.)39-40 VE, VF, WD,41-53 '/a, 1 TON, UTILITY,54-55 S (1st Ser.),55 H, F w/H.D., 4-SPD.,55 F, J w/H.T. (2nd Ser.),56-59 Ser. 3A-3C w/H.D., 4-SPD.,56-59 Ser. 3C-3E w/H.T.,60-66 Ser. 10 w/3-SPD. H.D., 4-SPD.
(exc. 4/WD, 127 W.B.),60-66 Ser. 20 (D-D) (104 W.B. w/3-SPD.
H.D., 4-SPD., H.T.),60 Ser. 20 (4/WD),60-66 Ser. 30 (D-D) w/104 W.B.,65-66 Ser. 10-20 (4/W/D) w/4-SPD.,67-68 Ser. 10 (115 W.B. w/4-SPD. trans.)
(exc. 4/WD),67-68 Ser. 10 (D-D) w/4-SPD. trans.,67-68 Ser. 20-30 (D-D) (104 W.B. w/4-
SPD. trans.),67-68 Ser. 20 (4/WD),67-68 Ser. 10 (4/WD) w/127 W.B. (8 cyl.)54-55 '/,, 1 TON, UTILITY (1st Ser.)
(exc. S),55 M, J w/H.D., 4-SPD. (2nd Ser.),55-59 D-D, 1 TON (exc. F, Ser, 3C),56-59 Ser. 38-3E w/H.D., 4-SPD.,60-62 Ser. 20 w/3 SPD. H.D., 4 SPD.,
P.G. (exc. 4/WD, D-D),60-67 Ser. 20-30 (D-D) (exc. 104 W.B.),60-66 Ser. 30 (exc. D-D),63-66 Ser. 20 w/3-SPD., H.D., 4-SPD.,
(exc. D-D, 4/WD) ..............65-68 Ser. 20 w/H.D., 4-SPD. (exc. D-D).54-55 %, 1 TON, UTILITY (1st Ser.)
(exc. S),55 D-D, 1 TON (2nd Ser.) (exc. F),55 M, J w/H.D., 4-SPD. (2nd Ser.),56-59 D-D, 1, 1'/ TON (exc. Ser. 3C),56-59 Ser. 3B-3E w/H.D , 4/SPD.,60-64 Ser. 20 w/3 SPD. HD., 4-SPD.,
P.G. (exc. 4/WD, D-D),60-68 Ser. 20-30 (D-D) (exc. 104 W.B.),60-68 Ser. 30 (exc. D-D),65-68 Ser. 20 w /H.D., 4-SPD, (exc. D-D).
WASHER, split (steel) (1 9/ b I.D. x 1/)O.D.O.D. x Y3 , thk.) ..................... 279335 2 .10
WASHER (cork) (1Y4 x 1% x 5/ 6 ) ......... 084415 1 .15
WASHER (steel) (1 1 / 6 O.D.-16)(teeth) .............................3705196 1 .10
WASHER (cork) (1 3/4 O.D.-16 teeth) ..... 3705197 1 .10
5.556©-1967
898
Chevrolet Motor DivisionGeneral Motors Corporation
rearshaft ......................... 080386 A.R. 13
WASHER (steel) rear prop. shaft andU-joint assy. (1 5/32 I.D. x 1°; 6 O.D.) ... 5238167 1 m
WASHER, (cork) rear prop. shaft andU-joint assy. (P/ 6 I.D. x 1 41/6 , O.D.)... 5238166 1
SEAL, rubber—front prop, shaft,all positions,
aux. frt., rear prop. shaft ............ 2296505 A.R .35
CAP (steel) ('q x 1 15/ 6 O.D.),
front prop. shaft .................... 3663239 1 55
58-64 PASS.,64 Ser. 10 w/115, 127 W.B. (exc.
4/ WD),64-66 Ser. 10-20 w!3-SPD. (exc. H.D.,
D-D, 4'WD),67-68 Ser. 10-20 w'115, 127 W.B. (exc,
4-SPD, trans., 4/WD) ..........57-59 Ser. 3A w/4/ WD.,60-61 4 'WD,63-68 4'WD ..........................57-59 Ser. 3A •,v/4/WD.,60-61 4/WD ..........................63 4'WD ..........................64-68 Ser. 10-20 (4 WD) ...............64 Ser. 10 (4/WD),65-66 Ser. 10 (4 /WD) w / 127 W.B.,67-68 Ser. 10 (4 WO) w 115 W.B.,67-68 Ser. 10 (4 WD) (127 W.B. w/6 cyl.)60-66 Ser. 10 (127 W.B. w/3-SPD. H.D.,
4-SPD.) (exc. 4/WD),67-68 Ser. 10 w/4-SPD. trans. (exc.
4'WD) .......................67-68 Ser. 10 (4,'WD) (8 cyl.) ...........60-66 Ser. 10 (127 W.B. w/3-SPD. H.D.,
4-SPD.) (exc. 4/WD),67-68 Ser. 10 w/4-SPD. trans. (exc.
4/WD) .......................67-68 Ser. 10 (4'WD) (8 cyl.) ...........57-59 Ser. 3A w /4 /WD .................57-59 Ser. 3E-3G w/4/WD ..............60-61 4/WD,64-66 Ser. 20 (4 'WD) ..................39-40 VE, VF, WD,41-55 COMM., UTILITY (1st Ser.) (exc.
TON),55-59 ' z TON v:/H.D. , 4-SPD.,55 F, J w Prop. Brake (2nd Ser.),55 '., 1 TON (2nd Ser.) (exc. F, J),56-59 Ser. 3C-3E w,'prop. brake,56-59 'a, 1 TON (exc. Ser. 3C-3E),60-67 Ser. 10 thru 30 (exc. 127 W.B.,
4 'WD),65-66 Ser. 10 w 'leaf type springs
(exc. P/Trac.),67 Ser. 10 (4/WD) (127 W.B. w/6 cyl.),67 Ser. 20 (4/WD) ..................65-66 4 'WD ..........................57-59 Ser. 3A w; 4/WD„60 4;'WD.,60-62 Ser. 10 w/127 W.B. (exc. 3-SPD.,
4'1VD)63-68 Ser. 10 (115, 127 W.B. w/3-SPD.
H.D., 4-SPD.) (exc. 4/WD),63-66 4 'WD,67-68 Ser. 10 (4 'WD) w/127 W.B. ...... .67-68 Ser. 10-20 (4 'WD) w/aux. shaft...57-59 4 'WD .........................57-59 Ser. 3E-3G w/4/WD ..............
WASHER, inter yoke (1'/e O.D.-10 teeth) . 3743255 1 10
WASHER, aux. front and rr. prop, shaft . . 240803 2 07
WASHER, rubber, aux, front,rear prop, shaft and U-joint assy,,aux. front,
CAP, aux. frt. and rr. prop, shaft andU-joint, dust rear ................... 240804 1 .75
NUT, attach. frt. prop, shaft,attach. aux, frt. prop, shaft (7'6-20)... 3722853 A,R.(6.172)
5.560 GASKET—RETAINER—SEAL, Propeller Shaft UniversalJoint Trunnion
41-53 'a, 1 TON, UTILITY ............. (?( I.D. x 1/64 O.D.) ................. 3660968 . A.R. .0741-53 3
4 , 1 TON, UTILITY ............. RETAINER, gasket................... 3660969 r A,R. .10NOTE: These parts used with trunnion having finger diameter of .7385 on all
1941 models with 235 in. engine. Also used on late 1941 models with216 in. engine.
—1967Chevrolet Motor Division 5.556-5.560General Motors Corporation 899
54-55 ', 1 TON, UTILITY (1st Ser.),55-59 '2 TON w/H.D., 4-SPD.,60-67 Ser. 10 thru 30 (1st design) , ...... SEAL, yoke brg. ( 25/2 I.D. x 1'/a O.D.)63-64 CORVETTE ................... (finger(finger dia. 775) .................... 2296509 A.R. .1555-62 PASS., CORVETTE, '4, '/4 TON , , , SEAL, yoke brg.
(21/32 I. D. x 1 1/32 O.D.)(finger dia .596) .................... 3774326 A.R. .40
57-59 Ser. 3A w '4 'WD ................. SEAL, transfer case to frt. and rr. axle,60-66 Ser. 20 (4 WD) .................. front and aux. prop. shaft,60-66 Ser. 10 (4 'WD) ....... .......... frt., rr. and aux. prop. shaft,66-68 Ser. 10 thru 30 w T.H. (exc. D-D) frt. andinter.,66-68 Ser. 20 (D-D) w/T.H . ............ frt.(Spicer2-86-89)................. 1178279 A.R. .1663-64 PASS.,63-65 Ser. 10 (exc. 4 /WD),63-65 Ser. 10 (4 WD) (exc. 4-SPD.),63-65 Ser, 20 (exc. 3-SPD.,H.D., 4-SPD.),64-65 G-10,
64 TAXI,65-66 CORVETTE .................... SEAL, yoke brg. (1'/3 , O.D. x thk.)65 Ser. 10 w /leaf type springs (exc.
P 'Trac,) ..................... (w /oblong identification mark) ....... 3821777 A.R. .4064-68 PASS., CORVETTE ............. SEAL, yoke brg.,65 Ser. 10 (D-D) w/H.D. 3-SPD.,
4-SPD.,66-68 Ser. 10 (127 W.B. w/H.D. 3-SPD.,
4-SPD.) ...................... rear,66-68 Ser. 10 (exc. H.D. 3-SPD.,
4-SPD„ P.O.) ................. all locations,66-68 Ser. 20 w /3-SPD. (exc. H.D.,
D-D, 4/WD),67-68 Ser. 20 (D-D) (6 cyl. w/3-SPD., frt. andintermediate (1 1/32 O.D. x
P. G.) ....................... 2 /32 I. D.) ........................ 3841923 A.R. .15
5.564 BALL, Universal Joint
38-40 UTIL. (exc. VE, VF, WD) , , , , , , , , front (used on intermediate joint onWC) ............................ 353896 1 4.3538-40 ' 1 TON ,,,,,,,,,,,,,,,,,,,,,, (usedw/rearjoint),
37-54 PASS., TON .................. (used w/front joint)................. 602688 1 6.70
5.565 COLLAR—SEAT—SEAL, Universal Joint Ball
38-39 ALL (VE, VF),41-54 PASS., '2, '-_ TON (exc. P.O., H.T.) front ball .......................... 348131 1 1.8450-54 PASS. w/P.G.,54 '2 TON w /H.T,,,,,,, , , , , , , , , , , , , (6 bolt holes)...................... 3692835 1 1.8450-54 PASS. w; P.G.,54 'z TON w 'H.T ................... SEAT............................... 3692838 1 1.8550-54 PASS. w/P.G.,54 'i TON w'H.T ................... SEAL, seat "0" ring (4/ I.D.)......... 3689826 1 (4.203)
5.566 BEARING—ROLLER—SPACER, Universal Joint Yoke Trunnion
38-39 34, 1 TON, UTILITY (exc.VE, VF),38-39 ':2 TON w/4/SPD ................ front and rear,40-54 PASS., 'Z TON .................. front yoke ......................... 3665770( 2 .7540 COMM., UTILITY (exc. KC, WD) . , front ('Y, O.D. x 2 3, LD.) ..........41 -53 /3 TON ........................ 4/4 wide ......................... 373344 A.R. .60
40-54 PASS., '2 TON .................. rear yoke.......................... 3665771# 2 .50=NOTE: 3665770 and 3665771 for use w/"U" Joint 606779 on 1940-41 models.
53-55 COMM., UTILITY (1st Ser.),55-59 Ser. 3 (2nd Ser.),60-68 Ser. 10 thru 30 (exc. T.H.) ........ frt., inter., rear, (1 3/ 6 O.D. x 25/32 thk.)63 CORVETTE .................... (use w/finger dia. over 3/4 ) 2296504 A.R. 2.0057-59 Ser. 3A w/4/WD ................. inter. and rr.,60-66 Ser. 10 (4%WD) .................. frt., inter, and rr.,60-66 Ser. 20 (4 /WD),67 Ser. 10 thru 30 w/T.H............ frt. and inter. (Spicer 2-6-208X) ...... 2362290 A.R. 1.25
5.560-5.566 —^ 967
900 Chevrolet Motor Division
General Motors Corporation
front and rear,
all locations (1O O.D. x °/ 6 thk.)..... 3709838 A.R. 1.45
all locations (16) 6 O.D. x °/a thk.)(black oxide on rollers) , , , , ....... 3828467 A.R. 1.45
front,
rear .............................. 3841935 A.R. .50
aux. shaft,U-joint yoke trunnion ............... 3903723 A.R. 1.50U-joint yoke trunnion .............. 386448 A.R.
ROLLER, brg. frt., inter., rear, (use w/fingerdia. over '/a),rear wheel drive shaft U-joint ........ 7450409 A.R. .02
ROLLER, brg., front and rear,
all locations ( 3/33 dia. x "/2 O.L.), , , . , 606868 A.R. .05ROLLER, frt., prop. shaft and bearing
support (w/finger dia. .894).......... 3729088 A.R. .02
05
5003
53-59 CORVETTE,55-59 PASS., '2, % TON ...............60-62 PASS., CORVETTE,60-61 Ser. 10-20 (exc. 4/WD),62 Ser. 10-20 ......................63 PASS.,63-66 Ser. 10 (exc. 4;'WD),63-66 Ser. 10 (4 /WD) (exc. 4-SPD.),63-67 Ser. 20 (exc. 3-SPD. H.D., 4-SPD.),64 PASS. w,O/D.,04-66 G-10 ...........................64 TAXI .........................65-68 PASS.. CORVETTE (exc. T.H.),65-68 Ser. 10-20 (exc. 4-SPD., T.H., D-D),65-68 Ser, 10-20 (D-D) w/Muncie
3-SPD., P.G.,65-68 G-10-20 ........................65-68 Ser. 10 w %4-SPD. ,65-68 (D-D) w/104 W.B. (3-SPD„
P.0.),65-68 G-10-20 ........................67-68 Ser. 10 thru 30 w;'T.H.,67-68 Ser. 10-20 (4 'WD) ...............67-68 Ser. 10 (4/WD) w/127 W.B. ...... .68 CORVETTE w 'T.H . ............ .53-55 COMM., UTILITY (1st. Ser.),55-59 Ser. 3 (2nd Ser.),60-62 Ser. 10 thru 30 (exc. 4/WD)63-67 Ser. 10 thru 30 (exc. D-D),67 Ser. 20-30 (D-D) (exc. Muncie
3-SPD., A.T.) .................63-67 CORVETTE ...................53-59 CORVETTE,55-59 PASS., , TON ...............60-62 PASS., CORVETTE,60-62 Ser. 10-20 ......................62 4 WD w /3-SPD ................. .63 PASS., CORVETTE w/4-SPD.,
P Trac.,63-64 4 'WD, w/3-SPD.,64 PASS., w/O/D,64 TAXI,64 Ser. 10 (exc. 4/WD),64 Ser. 20 (D-D) w/3-SPD.
(exc. 3-SPD. H.D., 104 W.B.) ... ROLLER, frt. prop, shaft and bearing64-66 G-10 ........................... support
(13/x '/3 2 dia.) (black
65-66 Ser. 10-20 ...................... oxide coated)...................... 9418456* A.R.*NOTE: Also used with leaf type springs on 65 Ser. 10-20 exc. P/Trac,
64-68 PASS., CORVETTE (exc. T.H.),65-68 Ser. 10-20 (exc. 4/WD) ........... ROLLER, U-joint yoke trunnion brg. .... 9419578 A.R.60-68 (4 WD) ......................... ROLLER, front trunnion br g............ 2084579 A.R.68 CORVETTE w,'T.H . ............. ROLLER, bearing .................... 3924169 A.R.68 CORVETTE w/T.H . ............. SPACER, trunnion brg................. 3882335 A.R.
5.567 SHIM, Ball Retainer
38-39 ALL (exc. VE, VF),41-53 PASS., 'z, '-, TON (exc. P.G.),54 PASS., 'z TON (exc. P.G., H.T.),54-55 ';, 1 TON w 'H.D. 3-SPD. (1st Ser.)40 COMM., UTIL. (exc. WD), , , , , , , , ,50-54 PASS. w P.O.,54 'z TON w'H.T . .................
(41/ I.D.) (4 holes),,,,,,,,,,,,,,,,,, 3699727 A.R. .10
front joint ......................... 3653962 A.R. .08
(46) 1.D.)(6 holes),,,,,,,,,,,,,,,,, 3692836 A.R. .11
o _19675.566-5.567Chevrolet Motor Division
General Motors Corporation 901
4
4
1
5.572 SEAL KIT—SEAL, Universal Joint Ball
38-40 ALL (exc. VE, VF, WD),41-53 PASS., '2, 3/4 TON (exc. AL, AM,
BL, BM),54 PASS., ' TON .................. consists of 4 shims, 2 seals ......... 372349038-40 ALL,41-53 PASS., , ',-; TON (exc. AL, AM,
BL, BM),54 PASS., '2 TON .................. SEAL, collar (cork—rubber)............ 370719438-40 ALL,41-54 PASS., '/2, '/4 TON (exc. AL, AM,
BL, BM) ..................... SEAL (cork-rubber) ................... 3707193
1 1.15
1 .45
1 .30
5.576 WASHER, Universal Joint Ball Pa cking
38-40 PASS., COMM.,41-54 PASS., i'2 TON .................. oil seal (2 11/32 O.D. x 11 6) ............ 595013 2 06
5.578 TRUNNION, Universal Joint (For Pass., %Z Ton. See 5.548 Repair Kit)
53-63 PASS., CORVETTE,55-63 Ser. 10,64 TAXI,64 PASS. w/O/D,64-65 G-1064-65 Ser. 10-20 ...................... frt., inter., rear (finger dia. 596)...... 3830580 A.R.(5.548)
5.579 SPACER, Universal Joint
38-40 COMM., UTIL. (exc. VE, VF, WD),41-47 COMM. (exc. AN, BN, DS, ES) .... (use w/4 speed transmission) ........ 590485 1 .0641-48 PASS., COMM. w/3-SPD.......... (13/8 O.D. x 1 I.D. x 2 O. L. )........ 591202 1 .8948-54 ''z, a TON w/3-SPD .............. (1 I.D. x 3"/ 2 O.L.) ................ 591791 1 .7549-54 PASS. (exc. P.G.) ............... (1 I. D. x 4 3/ 6 O.L.) ................. 591758 1 .7254-62 ALL w/H.T. (exc. 12 TON) ....... (1% I.D. x 1 5/ O.D. x 1' 9/32 O.L. -
steeltubing) ..................... 3707631 1 1.50
5.586 LOCK RING—BOLT—BOLT UNIT—STRAP—U-BOLT, "U" Joint Trunnionand Yoke
39-55 COMM., UTILITY (1st Ser. ),55-59 Ser. 3-4 (2nd Ser.),60-68 Ser. 10 thru 30 .................. frt. inter., rear (use w/finger63-67 CORVETTE .................... diameters .773 and .775) ........... 3721973 A.R.40-54 PASS., 1 i TON ................. ( u/6 I.D. —snap).................... 3652927 253-62 CORVETTE .................... front,55-59 PASS., tie, 4 TON ............... frt. and rear,60-68 PASS. Ser. 10 thru 30,64-68 G-10,
65-68 CORVETTE .................... all locations (finger dia. 596) ........ 3721887 A.R.66 PASS. (8 cyl.) w/T.H.,67 STA. WAG. (8 cyl.) w/T.H.,67 IMPALA, CAPRICE (8 cyl.
w T.H.) (exc. STA. WAG.)..... U-joint yoke trunnion bearing, snap . , 1456507 A.R.63 CORVETTE,64-65 Ser. 10 thru 30 .................. all locations (finger dia. 894) ........ 3723367 A.R.51-59 ALL w/Prop. Brake,60-64 Ser. 20 w/ 3-SPD. H.D., 4-SPD.
(exc. 4/WD., D-D),60-64 Ser. 20-30 (D-D) (exc. 3 SPD.)..... BOLT, joint fig. to park brk. drum(3/-2460-67 Ser. 30 w/4-SPD ................. x 19/16) ............................ 374038266-68 PASS., CORVETTE w/T.H. (8 cyl.),68 Ser. 10 thru 30 w/4-SPD. BOLT, shaft and U-joint assy. strap
(exc. 4'WD) .................. (s49-24x 1 ) ..................... 388734866 Ser. 20 w/ T.H. (exc. D-D),67-68 Ser. 10-20 wr T.H. (exc. D-D) ..... BOLT, inter, prop, shaft front yoke ..... 3885538
5.572-5.586 ©—J 967
9^2Chevrolet Motor Division
General Motors Corporation
07
.03
,10
14
12
20
15
95
67 Ser. 10 thru 30 w/New Process4-SPD. (exc. 4/WD)............ BOLT, U-joint flange to park brake drum 3910378 4 .35
68 Ser. 30 w/11000 lb. axle ......... BOLT, front flange ('/s-24 x 1'/a)(serrated shoulder) ................. 3866676 4 .15
40-54 PASS., '2 TON .................. BOLT UNIT, trunnion................. 3723489 1 .47`NOTE Consists of 4 bolts and 2 plates.
66-68 PASS. w'T.H . .................. STRAP, prop shaft ................... 3882979 2 .1068 Ser. 10 thru 30 w/4-SPD.
(exc. 4/WD) .................. STRAP, frt. prop. shaft and brg. supt.... 3920486 2 .2041-55 4, 1
TON, UTILITY (1st Ser.),55-59 ';, 1 TON (2nd Ser.) . ............. U-BOLT (frt., inter., rear),60-68 Ser. 10 thru 30 .................. rr. wheel drive shaft U-joint (%-24)63-67 CORVETTE .................... use w/finger dia. .773 and .775 ...... 2066840 A.R. .30ALL ALL, CORVETTE ............... U-BOLT, U-joint trunnion brg. (i6-18)
w/finger dia. .596 .................. 1358938 A.R. .30
5.595 NUT—WASHER, Propeller Shaft Pinion Flange
39-40 VE, VF, WD,41-42 UTILITY,46-55 %, 1 TON, UTIL. (exc. 2-SPD.)
(1st Ser.),55-59 ',, 1 TON (2nd Ser.),60-67 Ser. 20-30 ...................... at pinion,57-59 Ser. 3E-3G w.'4/WD .............. front axle (1
14-18).................. 3650631 A.R. .55
39-55 2-SPD. (1st Ser.) ................ pinion flange to dr. pinion,41-53 '' , 1 TON, UTIL, (exc. short COE) front prop. shaft,46-53 2 TON (SBC), TY, UY, VY ....... inter, prop. shaft (1 11 -20)............ 3651486 A.R. .5553-55 CORVETTE ................... ( /4 -16) ........................... 513715 1 .5555-59 ALL (exc. 'i TON w/P/Trac.),60-63 ALL, CORVETTE,64-68 PASS., CORVETTE, Ser. 10,64-68 G-10-20 ....................... ((-16) (used on front axle on 4/WD )„ 3887866 A.R. .6558-59 '2 TON w/P/Trac.,60-68 4/WD,65-67 Ser. 10 w/leaf type springs
(P /Trac.) ................... ( 4-16) (used on front on 4/WD) ...... 2346852 1 .5065-66 Ser. 20 w/leaf type springs ....... shaft pinion brg. ('/s-14 x 5/8
thk.)(Dana 30271) .................... 2353021• 1 .73
54-55 CORVETTE .................... WASHER (1 5/ 6 O.D. x 494 4 I. D. x '/32) • • • • • 513716 1 (5.545)
5.596 BRAKE PARTS, Propeller Shaft (Tru Stop)
41-50 ALL ........................... SHOE and LINING ASSY. (stampedC-704) ............................ 2130764 2 8.90
5.605 PLATE ASSY., Trans. Parking Brake
68 Ser. 30 w '11,000 lb. axle ......... .................................... 3866666 1 3.95
5.610 B RAKE PARTS, Propeller Shaft (Dual Shoe)
51-59 ALL,67 Ser. 30 w/11000 lb. axle ......... DRUM .............................. 591614 1 7.8068 Ser. 30 w /11,000 lb. axle......... DRUM .............................. 3866677 1 10.9551-59 ALL,67 Ser. 30 w/11000 lb. axle ......... SHOE,inner ........................ 3694570 1 3.4551-59 ALL.67 Ser. 30 w , 11000 lb. axle ......... SHOE, outer ......................... 3694574 1 4, 8551-59 ALL ........................... FACING UNIT, brake shoe (inner67 Ser. 30 w/11000 lb. axle ......... and outer) ......................... 3696497 1 2.9551-59 ALL,67 Ser. 30 w- 11000 lb. axle ......... DEFLECTOR, drum oil ............... 591609 1 1.8551-59 ALL,67 Ser. 30 w/ 11000 lb. axle ......... LEVER, brake shoe .................. 3695829 1 8.0051-59 ALL (exc. COE),67 Ser. 30 w/11000 lb. axle ......... LEVER, operating (offset w/shaft) ..... 3695826 1 1.7051-55 COE ........................... LEVER, operating (straight w/shaft).... 3695838 1 1.55
' -1967Chevrolet Motor Division 5.586-5.610General Motors Corporation 903
51-55 UTILITY (1st Ser.),67 Ser. 30 w/11000 lb. axle ......... LINK UNIT, operating ................ 3696895* 1 1.00
*NOTE: Consists of 1 Link, 1 Adjusting Nut, 1 Lever Spring, 1 Special Washer, and1 Hex. Nut.
51-55 1 TON, UTILITY (1st Ser.) (exc, LINK, lever outer connecting (angle onCOE) ........................ one end) .......................... 3695834 1 .40
51-55 1 TON, UTILITY (1st Ser.)(exc.COE) ........................ LINK, lever inner connecting .......... 3695828 1 .40
51-59 ALL,67 Ser. 30 w/11000 lb. axle ......... SUPPORT, adjusting bolt ............. 591678 1 1.2051-58 ALL,67 Ser. 30 w/11,000 lb. axle......... SPRING, outer shoe to adj. bolt support . 3695836 1 (5.026)51-58 ALL,67 Ser. 30 w/11000 lb. axle ......... SPRING, shoe lever .................. 3695830 1 .1551-55 1 TON, UTILITY (1st Ser.) (exc. SPRING, lever return (6 23/ 2 free length-
COE) ........................ 20 coils) .......................... 3695835 1 (4.827)68 Ser. 30 W/11,000 lb. axle ........ SPRING, shoe adi. screw .............. 3707417 1 (.5.02U151-58 ALL,67 Ser. 30 w/11000 lb. axle ......... LOCK, shoe lever .................... 2084234 1 .0851-58 ALL ........................... LOCK, brg. ret, to outer shoe .......... 359380 1 (5.056)
5.615 BRAKE PARTS, Pro peller Shaft (Band Type)
55-59 %, 1 TON (2nd Ser.)60-66 Ser. 20-30 w/3-SPD., 4-SPD....... DRUM (8 x 2 1/) ....................... 3713788 1 6.7055-59 3/, 1 TON (2nd Ser.),60-64 Ser. 20-30 w/3-SPD. H.D., 4-SPD.,
H.T.,65-66 Ser. 30 w/H.D. 3-SPD., 4-SPD..... BAND, w/facing ..................... 3713790 1 7,5055-59 3/q, 1 TON (2nd Ser.),60-64 Ser. 20-30 w/3-SPD. H.D., 4-SPD.,
H.T.,63 Sec, 10 w/ 3=SID, H.D.65 Ser. 30 w/H.b. 3-SPD.,66 Ser. 30 w/4-SPD ................. SPRING, band return (9 coils—'/a O.D.) , 3713777 2 .2055-59 3
/„ 1 TON (2nd Ser.),60-62 Ser. 20-30 (exc. 3-SPD. H.D.,
4-S PD., H. T.),63 Ser. 10 w /3-SPD. H.D.,63 Ser. 20 w /3SPD. H.D. (exc. D-D),63-65 Ser. 20-30 w/4-SPD . ............. SPRING, band center return (7 coils-64-65 Ser. 20-30 w3-SPD. H.D......... 2 O.D.) ........................... 3713780 1 .0555-59 '/a, 1 TON w/4-SPD. (2nd Ser.),60-64 Ser. 20-30 w/4-SPD .............. SPRING, upper adj. bolt (3 coils-65-66 Ser. 30 w '4-SPD ................. 1'/, O.D.) .......................... 3713779 1 .3055-57 D-D w/4-SPD. (2nd Ser.).......... ROD (lever) 9°4 b ...................... 3715866 1 (4.826155-59 %/<, 1 TON (2nd Ser.),60-66 Ser. 20-30 w/3-SPD. H.D., 4-SPD.,63 Ser. 10 w/3-SPD. H.D.,65-66 Ser. 30 w/4-SPD ................. CAM, operating (1 5/ b
ctr, to ctr. holes) , , 3713775 2 .2055 .59 1 TON w/3-SPD. H.D. (2nd Ser.),60-62 D-D w /3-SPD, H.D.,63-64 Ser. 20-30 (D-D) w/3-SPD. H. D. ... LINK, spacer (2 5/16 ctr. to ctr. holes) .... 3721041 1 .3055-59 3<, 1 TON w/4-SPD. (2nd Ser.),60-66 Ser. 20-30 w/4-SPD.,65-66 Ser. 30 w/4-SPD ................. LINK, spacer (3 13
/ 6 O.L.).............. 3713773 1 .0755-62 ' , 1 TON w H.T.' (2nd Ser.) ...... LINK, spacer (2 3
/q O.L. ) ............. . . 8615651 1 .3057-59 '/,, 1 TON w/4-SPD„60-64 Ser. 20-30 w/4-SPD.,65-66 Ser. 30 w/4-SPD ................. LINK, spacer (2 75/ 6 ctr. to ctr.)......... 3735174 1 .1558-62 D-D w/H. T ..................... LINK, spacer (32144 O.L.).............. 8617051 1 .7560-64 Ser. 20-30 w/3-SPD. H.D.,65-66 Ser. 30 w/4-SPD ................. LINK, spacer (3 s/6 ctr. to ctr.) ........ 3774919 1 .30
5.610-5,615 C-1967
904 Chevrolet Motor DivisionGeneral Motors Corporation
55-62 3/4 , 1 TON w/H.T. (2nd Ser.) .... . BRACKET, w/link .. . ............... . 8617004 1 27.9055-59 34, 1 TON w/H. D., H.T. (2nd Ser.),60-64 Ser. 20-30 w/3-SPD. H.D., H.T.,65-66 Ser. 30 w/4-SPD.,67 Ser. 30 w/11000 lb. axle ......... BOLT, upper adj. (734 O.L.) ........... 3713772 1 .4555-59 3, 1 TON (2nd Ser.),60-64 Ser. 20-30 w/3-SPD. H.D., 4-SPD.,
H.T.,65-66 Ser. 30 w/4-SPD ................. BOLT, center adj. (5( 6 -18 x 1 5/e) ....... 3713766 1 .2055-59 '/a, 1 TON (2nd Ser.),60-68 Ser. 20-30 w/3-SPD., H.D. 4-SPD.
H.T .......................... BOLT, lower adj. (Y4-28 x 24)........ 3718081 1 .155S-59 34, 1 TON (2nd Ser.),60-65 Ser. 20-30 w/3-SPD. H.D., 4-SPD.,
H.T .......................... SPACER, upper adj. bolt spring . ...... 3713778 1 .3555-59 '/4 , 1 TON (2nd Ser.),60-63 Ser. 20-30 w/3-SPD. H.D., 4-SPD.,65-66 Ser. 30 ......................... EYE, adj. rod end (1 3/4 O.L.) ........... 3713776 1 .7055-57 34, 1 TON (2nd Ser.),58-59 'i,, 1 TON (exc. 4-SPD.),60-64 Ser. 20-30 w/3-SPD. H.D., H.T.,65-66 Ser. 30 w/H.D. 3-SPD. ........... PIN, upr. adj. bolt clevis ( Y dia.) ...... 3713743 1 .15ALLALL ........................... PIN, lever pull rod end eye clevis
( 3/8 x 1343) ......... • .... • • ..... • 9421090 1 (8.942)57-59 34 , 1 TON w/4-SPD.,60-64 Ser. 20-30 w/4-SPD.,65-66 Ser. 30 w /4-SPD ................. PIN, upr. adj, bolt clevis ( 34 die.) ...... 3735176 1 .1568 Ser. 30 w/11,000 lb. axle......... PIN UNIT, brake shoe hold down ....... 3924177 1 .2568 Ser. 30 w/ 11,000 lb. axle......... SCREW w/nut, brake shoe adi. pivot .... 3915010 1 .5055-59 34 TON w/H.D., H.T. (2nd Ser.),55-59 1 TON (2nd Ser.),60 Ser. 20-30 (exc. H.T.)............ FACING UNIT, w/83 x 234 lining....... 3731573 1 5.25
5.623 BELLOWS, 2-Speed Axle, Gear Shift
39-46 2-SPD. w/Mech. Shift............ cable, 5% overall ................... 592055 2 (4.834)
5.635 DIAPHRAGM ASSY. and PARTS, 2-Speed Axle, Vacuum Shift
46-55 ALL (1st Ser.) .................. complete .......................... 3682150 1 23.7546-59 ALL ........................ • . CYL. and BOSS. ASSY. ............... 3847055 1 3.3046-55 ALL (1st Ser.) .................. SHELL and SEAL ASSY...... ........ 3847056 1 7.5046-55 ALL (1st Ser.) .................. ROD ASSY., piston ................... 3847057 1 5.9546-59 ALL ........................... DIAPHRAGM ........................ 3847058 1 3.0547-59 ALL ........................... SPACER, small ................... .. 3847060 1 .2046-59 ALL ........................... SPACER, push rod ................... 2212963 1 .3546 ALL ........................... RING, snap (round section) ............ 3847061 1 .1047-59 ALL ........................... RING, snap (square section) ........... 2270867 1 .1046-55 ALL (1st Ser.) .................. SEAL, mounting...................... 3682608 1 .3546-55 ALL (1st Ser.) .................. SEAL, piston rod..................... 2212953 1 1.5046-59 ALL ........................... SPRING, push rod.................... 2212962 1 .6546-59 ALL ........................... WASHER, stop ....................... 3847062 2 .1246-59 ALL ........................... BOLT (hex. hd. 5/ 6 -24 x 534)........... 3847063 1 .7546-55 ALL (1st Ser.) .................. SLEEVE, mounting ................... 3682607 1 5.9546-55 ALL (1st Ser.) .................. SHIM, sleeve (.003) ................... 2212968 A.R. .0546-55 ALL (1st Ser.) .................. SHIM, sleeve (.030) ................... 3685176 A.R. .1546-55 ALL (1st Ser.) .................. GASKET, rubber (oil resistant)......... 3704432 1 .05
5.636 LEVER-COVER-ROD-SPRING, 2-Speed Axle, Vacuum Shift Selector
46-47 ALL ........................... valve (painted black) ............... 3682970 1 1.1548-55 ALL (1st Ser.) .................. valve rod.......................... 3687084 A.R. .4049-55 ALL (1st Ser.) .................. COVER, valve lever indicator.......... 3710861 1 1.1548-53 ALL (exc. COE, FFC) ........... ROD, valve upr. (19% long) ............ 3687077 1 .7548-55 ALL (1st Ser.) .................. SPRING, valve upr. rod (4% coils) ...... 3690299 1 .0649-55 ALL (1st Ser.) .................. SPRING, valve lwr. rod (27 coils) ...... 3658835 1 (8.081)
hevrolet
7
Division 5.615-5.636ChevroletGeneral Motors Corporation 905
5.638 HOS E—ELBOW—CLAMP, 2-Speed Axle, Vacuum Shift
46-55 ALL (1st Ser.) .................. sel. valve to shifter cyl. pipes( 3/e x 16
1/) ........................ 3682980 A.R. 1.40
46-53 ALL,54-55 UTILITY(lst Ser.) (exc. COE) .... ELBOW, sel. valve to shifter cyl. ( ?/
e) • • • 3686414 A.R. .45ALL ALL ........................... CLAMP, control selector valve hose (°.4 6 ) 187011 A.R.(1.166)ALLALL .......................... CLAMP,
14- 5
/, diameters............... 2494772 A.R.(1.166)
5.640 VALVE ASSY., Vacuum Shift Selector
48-55 ALL (1st Ser.) ,,,,,,,,,,,,,,,,,, (329/32 O, L,) ........................ 3687054 1 11.50
5.645 VALVE ASSY. and PARTS, 2-Speed Axle, Vacuum Shift Check
46-55 ALL (1st Ser.) .................. .......... ....... ................. 2377963 A.R. 2.7567 Ser. 30 w/11,000 lb. axle ......... .......................... ... 88691460 1 7.2546-55 2 TON (1st Ser.),54-55 1'2 TON w/Brake Booster (1st Ser.) TEE ASSY ........................... 3847069 1 3.5554-55 1'4 TON (6 cyl.) (1st Ser.) (exc.
BrakeBooster) ................ TEE ASSY........................... 3847412 1 (4.931)Not required in this group. See
group 4.955 ................... SEAL, valve (Bendix 378907) .......... 3764290 .15Not required in this group. See
group4.955 ................... KIT,repair .......................... 2381777 .75Not required in this group. See
group4.955........._......... KIT, valve repair ..................... 3764293 .7567 Ser. 30 (D-D) ................... SLEEVE, control valve ............... 3752703 1 .4067 Ser. 30 (D-D) ................... FITTING, check valve ................ 3752704 1 .85
5.803 WHEEL—AD APTER—PIN—HAMMER ASSY., Front or Rear
This section contains Model Usage and Prices for Passenger, Corvette and Truck wheels.For Wheel size, Tire size and other added description, see the following charts. These twosections should be used in conjunction with one another to determine the correct wheel.
PASSENGER, CORVETTE AND Y2 TON
39-48 PASS., '/z TON,49-55 'z TON (1st Ser.) ................ .................................... 3693214 15.5046-55 'i TON,60-65 Ser. 10 ......................... ...............:.................... 2407805. 15.5946-48 PASS.,47-50 ' 2 TON,55-56 '2 TON (2nd Ser.),60 Ser. 10 ......................... .................................... 2251385 13.7549-53 PASS., CORVETTE ............. .................................... 3687980 13.9054-62 PASS., CORVETTE (exc.
POLICE),54-62 POLICE (1st design),63-67 PASS. (exc. POLICE)............ (15 x 5K) .......................... 3834956 10.9557-60 PASS. (exc. KINGSWOOD),61-68 PASS. (exc. STA. WAG.) ......... (14 x 5
J) ......................... 3870769 11.2557-64 CORVETTE (exc. knock off whls.),62-66 POLICE (2nd design) ............ ...................... 3838080 16.4054-62 '2 TON,63 Ser. 10 (4/WD) (1st Ser.) ......... .................................... 2324150 16.9056-59 12 TON ......................... .......................... . . . . . . .... 3724684 20.2557-59 'i TON ......................... .................................... 2354750 15.9559-60 SDL., PDL.,59-60 KINGSWOOD,61-62 STA. WAG.,63-68 PASS. (exc. disc brakes) ........ (14 x 6JK) ........................ 3870768 12.6560-68 Ser. 10 ......................... ... ....... 2394627•61-68 Ser. 10, G-20 ................... (15 x 5.5K) ........................ 2470547 11.3063-64 PASS (exc. STA. WAG.).......... (chrome) (14 x 5J) .................. 3844373 25.2563-65 CORVETTE w/knock off wheels .. (vaned aluminum) ................... 3868768 75.0063-68 Ser. 10 ........................ (16 x 5JK) ........................ 2440830 18.15
5.638-5.803 ©_1967
906Chevrolet Motor Division
General Motors Corporation
63 PASS. (exc. STA. WAG.),64 PASS . ...................... .. (chrome) (14 x 6JK)................ 3844379 36.4064-68 G-10 .......................... (14 x 5J K) ........................ 3872276 10.9564-66 G-10,68 G-10 .......................... (painted) (13") .................... 3860957 10.5065-66 CORVETTE (exc. knock off wheels) (15 x 5.50K) ....................... 3869156 16.7565-66 G-10 (2nd design),67 G-10. ...... (14 x 6.00JK) ...................... 3871919 11.2565-68 Ser. 10 (2nd design) ............. (15 x 5.5F) ....................... 2472988 15.9066 CORVETTE w/knock off wheel ... (15 x 6L) .......................... 3877236 82.4567 Ser. 10 ......................... (16.5 x 8.25) ....................... 3851350 55.5067-68 G-20 ........................... (16.5 x 6.00)....................... 388774667 PASS., CORVETTE w/disc brakes
(exc. Alum, wheel),68 PASS. w/disc brakes .......... . (15 x 6JK) ........................ 3901698 18.5067 PASS. (exc. STA. WAG.Jw/disc
brakes,68 PASS. (exc. STA. WAG.) ......... (15 x 5JJ) ........................ 3901696 16.4067 CORVETTE .................... aluminum (15 x 6L) ................. 3910730 82.4568 PASS. (exc. STA. WAG.) ......... (15 x 5JJ) ......................... 3928262 A.R.68 CORVETTE .................... (15 x 7JK)......................... 3910799 A.R.68 PASS. (exc. STA. WAG.) ......... (15 x 6JK) ........................ 3928267 A.R.63-66 CORVETTE w/knock off wheels , , ADAPTER, left ...................... 3847763 2 23.5063-66 CORVETTE w/knock off wheels , , ADAPTER, right ..................... 3847764 2 23.5063-66 CORVETTE w/knock off wheels PIN, wheel adapter wheel pilot......... 3847767 10 .3863-66 CORVETTE .................... HAMMER ASSY., knock off wheels...... 3859067 1 (8.821)
TRUCK (exc. Y2 TON)
39-46 YB, YD, WA, WB, YR, YS, MR, MS,MT, OE, OF, PV, PW, COE ..... .................................... 3651623 29.75
46 ', 1 TON,60-67 Ser. 20-30 (exc. 4/WD, D-D),62-67 Ser. 20 (4/ WD) (2nd design) ....... .................................... 2394629• 23.2546-53 2 TON,53-54 1'4 TON (1st Ser.) (exc. SBC) ..... .................................... 3682082 37.3046-55 1 TON,55 D-D,63-67 Ser. 30 ......................... (painted) .......................... 2227827• 24.9046-55 1'i TON (1st Ser.) ............... .................................... 3682076 29.7547-55 '4', 1 TON,60-67 Ser. 20 (D-D),60-63 Ser. 20 (4/WD) (1st design),60-63 Ser. 30 (D-D) (1st design) ........ .................................... 2227828• 23.2547-55 ', TON (1st Ser.),55 J (2nd Ser.),60-65 Ser. 20(4!WD) ................ .................................... 2495740 22.5048-53 2 TON ......................... .................................... 3696712 40.1551-53 2 TON,53 1 TON w/H.D .................. .................................... 3696012 37.3055-62 3, TON ......................... .................................... 2307808• 26.5054-55 UTILITY (1st Ser.) .............. .................................... 2305317• 38.7554-55 UTILITY (1st Ser.) .............. .................................... 3703874# 38.2554-55 2 TON (1st Ser.) ................ .................................... 37052264 41.2556-67 D-D, 1 TON w/dual wheels ....... .................................... 23396130 31.0056-59 , 1 TON w/single wheels,60-61 Ser. 20 (4/WD, D-D),60-67 Ser, 30 (D-D) ................... .................................... 2339612 27.2556-59 TON w/duals (exc. D-D) ....... .................................... 3724683 24.5056-57 ' 4 , 1 TON (exc. duals, D-D),58-59 '-a, 1 TON (exc. duals),60-67 Ser. 20 (D-D),60-62 Ser. 20 (4 `WD) (1st design) ....... .................................... 3724682 20.5060-67 Ser. 20-30 (D-D) ................ .................................... 2471588• 25.0060-64 Ser. 20 (exc. D-D, 4/W D) ......... .................................... 2413571 15.9560-67 Ser. 20-30 (exc. 4/WD, D-D),63-67 Ser. 20 (4/WD) .................. .................................... 2394677 27.2560-67 Ser. 20-30 (exc. 4/WD, D-D, dual
wheels,62-67 Ser. 20 (4/WD) (2nd design) ....... .................................... 2394628 20.5060-68 Ser. 30 w,'dual wheels (exc. D-D) . .................................... 23946260 24.50
-1967Chevrolet Motor DivisionGeneral Motors Corporation 907
5.803
61-64 Ser. 30,63-64 Ser. 20 (exc. 4/WD, D-D) ......... .................................... 2428262• 26.5062 Ser. 20 (exc. D-D),63-65 Ser. 10 ......................... .................................... 24078050 15.9563-67 Ser. 30 (exc. D-D),64-67 Ser. 20 (exc. 4/WD, D-D) ......... (painted) .......................... 2458670 27.2564-66 Ser. 20-30 (exc. D-D) ............ .................................... 2395844• 26.5064-68 Ser. 20 (exc. D-D) ............... (16 x 6G) .......................... 3907297 29.7564-67 Ser. 20 (exc. D-D) ............... .................................... 3860964 29.7565 Ser. 20 (exc. D-D, 4/WD) ......... .................................... 2495738 22.5066-68 Ser. 20-3 0 (CONY.),66-67 Ser. 20 (D-D, 4/WD),68 Ser. 20 (4/WD) .................. .................................... 3851350 55.5067 Ser. 30 (exc. 133 W/B),68 Ser. 30 (CONY.) w/11,000 lb.
axle (exc. 157 W.B.) ........... .................................... • 3729813 30.7567 Ser. 30 w/11000 lb. rr. axle,68 Ser. 30 (CONY.) w/11,000 lb.
rr. axle ...................... .................................... 3815680 24.7567-68 Ser. 20-30 (exc. D-D),68 Ser. 20 (D-D) ................... .................................... 3913147 22.5067-68 Ser. 20-30 ...................... .................................... 3913151 29.75
#NOTE: Also used on 1956-1962 models equipped with tube tires.
NOT SERVICED WHEELS
48-51 2 TON (exc. SBC) ............... .................................... 369597051-52 2 TON ......................... .................................... 3693380
5.803©-1967
908 Chevrolet Motor DivisionGeneral Motors Corporation
HUB SPOKEHOLE HOLES
HAND HOLES HUBILE
WHEEL DISC
NOTE: Offset is determined by
measuring the distance
from the centerline ofthe rim to the innerside of the wheel disc.
NOTE: Wheel part numbers donot include clamp orside ring.
R OF RIM
I- OFFSET
6 STUD 8 STUD VENTILATEDSTAMPED DISC WHEEL DISC WHEEL
WHEEL RIMSFollowing illustrations are examples of types of rims which are part of assemblies. The rims are not
SIDE RINGserviced separately and are either welded or riveted to the wheel disc.
(SERVICED SEPARATELY)
RIM WIDTH RIM WIDTHRIM WIDTH -
5° 5°+ 5° sERVI
AMPPR
PNG
Y)5°
1 5°1 5° SIDE RING
(SERVICED SEPARATELY)
ONE PIECE TWO PIECE THREE PIECE
One-piece rims: 5.25" or larger rims have a 15" Two-piece rims: Have a 50 taper bead seat and are Three-piece rims: Have a 5° taper bead seat and are
taper bead seat, and are used for tubeless tires, used only for tube tires. RPO wheels of 6.0" or 6.5" used only for tube tires. RPO wheels of 7.0" or 7.5"
Smaller rims have a 5° taper bead seat, and are ri m widths are of 2-piece design. ri m widths are of 3-piece design.
used for both tubeless and tube tires.
^ ^ RIM WIDTH
^V RIM
WheelConstruction Size Offset
PASSENGER, CORVETTE AND Y2 TON
No.Hub Cap
Attach. TireTire Size Clips Type
No.Spoke
or
Lug Clamp Side HandHoles Wheel Ring Ring Holes
1 Piece (welded) 13 x 5.55 1 6.50 x 13, 7.00 x 13 ........... 0 Both 5 386095' ....... ....... 41 Piece 0Welded) 14 x 5J 1 7.35 x 14 ..................... 0 Tubeless 5 3872276 ....... .......1 Piece (Welded) 14 x 5 5 °/a 7.00 x 14, 7.50 x 14, 8.00 x 14 .. 0 Both 5 3844373 ....... ..... 41 Piece (Welded) 14 x 5J °/16 7.00 x 14, 7.50 x 14, 8.00 x 14 .. 0 Both 5 3849574 ....... ....... 41 Piece (8 elded) 14 x 55 9/16 7.35 x 14 ..................... 0 Both 5 3870769 ... - - .. 41 Piece (Welded) 14 x 6.00 5 K 1 7.00 x 14 ..................... 0 Tubeless 5 3871919
1 Piece (Welded) 14 x 6JK 3'l6 8.00 x 14 ..................... 0 Both 5 3844379I Piece (Welded) 14 x 6JK 1/6 7.50 x 14, 8.00 x 14, 8.50 x 14 .. 0 Both 5 3849573 ....... ... . ... 4
1 Piece (Welded 14 x 6J !16 8.25 x 14, 8.55 x 14 ........... 9 Both 5 3870768 ....... ....... 4
1 Piece (Riveted) 15 x 5K °/6 5.50 x 15, 6.00 x 15, 6.40 x 15,6.50 x 15, 6.70 x 15, 7.10 x 15 5 Tube 5 368 7 980' ....... ....... 4
1 Piece (Riveted) 15 x 5K 9/a 5.50 x 15, 6.00 x 15, 6.40 x 15,6.50 x 15, 6.70 x 15, 7.10 x 15,
7.50 x 15 .................. 3 Tube 6 3689039A ....... ....... 4
1 Piece (Riveted) 15 x 5K v/a 6.70 x 15, 7.10 x 15 ........... 0 Both 5 3834956 41 Piece (Welded) 15 x 5K %6 7.75 x 15 ..................... 0 Both 5 3869156 ....... ....... 4
1 Piece (8eldec) 15 x 555 1/a 15 x 7.75, 15 x 8.15 ........... 0 Both 5 3901696 ....... ....... 51 Piece (Riveted) 15 x 5.5F None 7.00 x 15, 7.50 x 15 ........... 6 Tube 6 2407805 3778058 2406653 4
-1967 5.803Chevrolet Motor DivisionGeneral Motors Corporation 909
No.No. Spoke
Hub Cap No. orWheel Attach. Tire Lug Clamp Side Hand
Construction Size Offset Tire Size Clips Type Holes Wheel Ring Ring Holes1 Piece (Riveted) 15 x 5.5 K °/y 6.70 x 15, 7.60 x 15 ........... 3 Both 6 2354750 ....... ....... 41 Piece (Riveted) 15 x 5.5K '/6 6.70 x 15, 7.10 x 15 ........... 0 Tube 5 3838080 ....... ....... 41 Piece (Welded ) 15 x 5.5K 9/6 6.70 x 15, 7.10 x 15, 7.75 x 15,
8.15 x 15 ................... 0 Tubeless 6 2470547 ....... ....... 4Piece (Riveted) 15 x 5.5F None 7.00 x 15 .................... 9 Tube 6 2472988 3778058 2406653 3
1 Piece (Cast) 15 x 6L '/6 7.75 x 15 ..................... 0 Both 0 3877236 ....... .......1 Piece (Welded) 15 x 6L 7.75 x 15 ..................... 0 Both 5 3868768 ....... .......1 Piece (Welded) 15 x 6JK 0 15 x 7.75, 15 x 8.15 ........... 0 Both 5 3901698 ....... ....... 51 Piece (Welded) 15 x 6JK 8.15 x 15 ................... 0 Tubless 6 3928267 ....... .......
1 Piece (welded) 15 x 7JK 9/32 ............................. 0 Tubeless 5 3910799 ....... ....... 41 Piece (Riveted) 16 x 4.50K 9/a 5.50 x 16, 6.00 x 16, 6.50 x 16 .. 3 Tube 6 3693214 ....... ....... 41 Piece (Riveted) 16 x 5K 7/6 6.00 x 16, 6.50 x 16 ........... 3 Both 6 2324150 ....... ....... 41 Piece (Riveted) 16 x 5K '.'1'6 6.00-x 16, 6.50 x 16 ........... 0 Both 6 2440830 ....... ....... 41 Piece (Riveted) 16.5 x 8.25 27/32 7.00 x 15 ..................... 4 Tube 8 3851350 ....... ....... 41 Piece (Riveted) 17.5 x 5.25 None 7 x 17.5, 8 x 17.5 ............. 6 Tubeless 6 3724684 ....... ....... 41 Piece (Riveted) 17.5 x 5.25 t'/6 7 x 17.5, 8 x 17.5 ........... 6 Tubeless 6 2394627 ....... ....... 4
TRUCK (exc. % TON)
3 Piece (Riveted) 15 x 5.50F 1 7.00 x 15, 7.50 x 15 ........... 4 Tube 8 2413571 3778058 2406653 42 Piece (Riveted) 15 x 5.50 1 7.00 x 15, 7.50 x 15 ........... 0 Tube 8 2495738 ....... 24957432 Piece (Welded) 15 x 5.5 8 7.00 x 15 ................... 0 Tube 8 2495740 ....... 24957433 Piece (Riveted) 15 x 5.50F % 7.00 x 15, 7.50 x 15 ........... 4 Tube 8 2407804 3778058 ''406653 43 Piece (Riveted) 15 x 5.50F None 7.00 x 15, 7.50 x 15........... 6 Tube 6 2407805 3778058 2406653 42 Piece (Riveted) 16 x 5.50F 4% 6.50 x 16 ..................... 0 Tube 8 2307808 ....... 2059902 42 Piece (Riveted) 16 x 5.50F 3 15
/6 16 x 6.50 .................... 0 Tube 8 2428262 ....... 20599022 Piece (Weld) 16 x 5.50F 5 7.00 x 16, 7.50 x 16, 6.50 x 16 .. 0 Tube 8 3848648 ....... 2059902 42 Piece (Weld) 16 x 5.50OF 5 7.00 x 16, 7.50 x 16, 6.50 x 16 .. 0 Tube 8 2458670 ....... 2059902 42 Piece (Riveted) 16 x 6.00 1'/8 7.00 x 16, 7.50 x 16 ......... 4 Tube 8 3860964 ....... 3906582 42 Piece (Riveted) 16 x 6.00 l/ 7.00 7.00 x 16, 7.50 x 16 ........... 4 Tube 8 3907297 ....... 2219056 41 Piece (Riveted) 16.5 x 6.00 5/ 8.00 x 16.5 ................. 0 Tubeless 6 3887746 ....... ....... 41 Piece (Riveted) 16.5 x 6.00 1% 8.00 x 16.5 ................. 0 Tubeless 8 3913147 ....... ....... 41 Piece (Riveted) 16.5 x 6.75 1% 8.75 x 16.5, 9.50 x 16.5...... 0 Tubeless 8 3913151 ....... ....... 41 Piece (Riveted) 16.5 x 8.25 21/32 7.00 x 15, 10.16.5 ............. 4 Tube 8 3851350 ....... ....... 43 Piece (Riveted) 17 x 5.0 '/6 7.00 x 17, 7.50 x 17 ........... 4 Tube 8 2227828 3681788 2306846 43 Piece (Riveted) 17 x 5.0 13/ 7.00 x 17, 7.50 x 17 ........... 4 Tube 8 2394629 3681788 2306846 41 Piece (Riveted) 17.5 x 5.25 None 7 x 17.5, 8 x 17.5 ............. 4 Tubeless 8 3724682 ....... ....... 41 Piece (Riveted) 17.5 x 5.25 1 518 7 x 17.5, 8 x 17.5 ............. 4 Tubeless 8 2394628 ....... ....... 4
1 Piece (\t elded) 17.5 x 5.25 4 3/ 6 7 x 17.5, 8 x 17.5 ............. 0 Tubeless 8 3724683 ....... ....... 41 Piece (Riveted) 17.5 x 5.25 4 1/ 7 x 17.5, 8 x 17.5 ........... 0 Tubeless 8 2394626 ....... ....... 4
3 Piece (Riveted) 17 x 6.0 1'/b 7.50 x 17, 7.00 x 17 ........... 0 Tube 8 2395844 3681788 22842873 Piece (Riveted) 17 x 6.0 '/6 17 x 7.00, 17 x 7.50 ........... 0 Tube 8 2471588 3681'88 2284287 43 Piece (Riveted) 18 x 5.0 43/a 7. x 18 ..................... Tube 10 3815680 3682062 2306847 83 Piece (Riveted) 18 x 5.0 4% 7.00 x 18, 7.50 x 18 ........... 0 Tube 8 2227827 3682062 23068471 Piece (Riveted) 19.5 x 5.25 '16 8 x 19.5 ...................... 4 Tubeless 8 2339612 ....... ....... 41 Piece (Riveted) 19.5 x 5.25 1% 8 x 19.5 ...................... 4 Tubeless 8 23946'7 ....... ....... 4
1 Piece (Riveted) 19.5 x 5.25 41&(6 8 x 19.5 ...................... 0 Tubeless 8 2339613 ....... ....... 4
1 Piece (Ri v eted) 19.5 x 5.25 413/y 8 x 19,5 ..................... Tubeless 10 3729813 ....... ....... 53 Piece (Ri v eted) 20 x 5.0 43/4 6.50 x 20, 7.00 x 20 ........... 0 Tube 10 36820765 3696716 3707075 52 Piece (Riveted) 20 x SOS 5'/ 7.50 x 20, 8.25 x 20 ........... 0 Tube 10 3651623 ....... 2039648 83 Piece (Riveted) 20 x 6.0 5% 7.00 x 20, 7.50 x 20, 8.25 x 20 .. 0 Tube 10 36820825 3696716 3697364 53 Piece (Riveted) 20 x 6.0 5% 7.00 x 20, 7.50 x 20, 8.25 x 20 .. 0 Tube 10 2305317 3696716 3697364 52 Piece (Riveted) 20 x 6,0 53/, 7.00 x 20, 7.50 x 20, 8.25 x 20. 0 Tube 10 36960125 ....... 2274258 52 Piece (Riveted) 20 x 6.0 53%a 7.00 x 20, 7.50 x 20, 8.25 x 20 , , 0 Tube 10 37038741 ....... 2274258 53 Piece (Riveted) 20 x 6.5 558 8.25 x 20, 9.00 x 20 ........... 0 Tube 10 36967125 3696716 3704948 53 Piece (Riveted) 20 x 6.5 5% 8.25 x 20, 9.00 x 20 ........... 0 Tube 10 37052261 3696716 3704948 5
*NOTE: 2 29132 dia. hub hole.5NOTE: 4% dia. hub hole.ANOTE:
32/dia. hub hole.
t \OTE: 5 55) dia. hub hole.
5.803 ©-1967Chevrolet Motor Division
910 General Motors Corporation
2 5.2 5
5.806 HUB—SPINDLE—FLANGE ASSY., Rear Wheel
40-50 UTILITY ....................... splined type (forged hub) (use3682389 Bolt) .................... 3685195* 2
*NOTE: Use only w/Hypoid Gear Type 2 -SPD. AXLE in 1946. When replacingone bolted type hub w/one spline type hub 3685195 replace axleshaft together with 1-3689081 Conversion Kit.
41-42 2-SPD .......................... (use 5238559 Hub Bolt),46 2-SPD .......................... (use 3682153 Hub Bolt) (cast 3668100) 3668100T 2
TNOTE: 3668100 to be used only w/Spur Gear Type 2-SPD. Axle.46-59 3/4 1 TON ...................... (cast iron hub—'/s flange) (axle shaft60-67 Set. 20 (D-D) ................... bolt holes
14-13 threads) (cast
60-62 Ser. 20 (4/WD) (1st design) ........................ 3697044§ 2§NOTE: 3697045 Bolt ( 1/2 -20 x 2) must be used with 3697044 Hub.
51-53 UTILITY ....................... splined type (cast hub-594 4 flange)54-55 1'/2 TON (1st Ser.) (exc. 2-SPD.) ... (three 5/ 6
.18 tapped holes) (cast3697042) ....................... 36970420 2
ONOTE: 3697043 Bolt ( 5/s -18 x 3'/ 6 ) must be used with 3697042 Hub.
22.60
22.50
27.25
5.803-5.806v-1967Chevrolet Motor DivisionGeneral Motors Corporation 911
NOT SERVICED WHEELS
NOTE: The Following Wheel Assemblies are not serviced and are shown only for Clamp and Side Ring usage. When re-placing obsolete Wheel by current Wheel corresponding Clamp and Side Ring must be used.
No.No. Spoke
Hub Cap orWheel Attach. Tire Lug Clamp Side Hand
Construction Size Offset Tire Size Clips Type Holes Wheel Ring Ring Holes2 Piece (Riveted) 20 x 6.0 5% 7.50 x 20, 8.25 x 20 ........... 0 Tube 10 3693380 ....... 3693385 51 Piece (Riveted) 20 x 6.OT 51/2 8.25 x 20, 9.00 x 20 ........... 0 Tube 10 3686852 ....... ....... 53 Piece (Riveted) 20 x 6.5 5% 8.25 x 20, 9.00 x 20 ........... 0 Tube 10 3695970 3695975 3695974 5
5.805 WEIGHT, Wheel Balance
TYPE B
58-68 PASS., CORVETTE,60-68 Ser. 10, G-10, 20 ................58-68 PASS., CORVETTE,60-68 Ser. 10, G-10, 20 ................58-68 PASS., CORVETTE,60-68 Ser. 10, G-10, 20 ...............58-68 PASS., CORVETTE,60-68 Ser. 10, G-10 ...................58-68 PASS., CORVETTE,60-68 Set. 10, G-10 ...................58-59 PASS., CORVETTE .............58-64 PASS., CORVETTE,60-61 Ser. 10 (exc. D-D),60-68 Ser. 10 thru 30 ................ .60-68 Ser. 10 thru 30 ..................60-68 Ser. 10 thru 30 ..................60-65 Set. 20-30,66-68 Ser. 30,67-68 Ser. 20 (exc. D-D) ..............60-66 Ser. 20-30,67 Ser. 30,67-68 Ser. 20 (exc. D-D),68 Ser. 30 (exc. D-D) ..............63-67 CORVETTE ....................63-67 CORVETTE ....................63-67 CORVETTE ....................
TYPE D
(1 1/2 oz.) (size cast on weight) ....... 9421502 A.R. .15
(1 oz.) (size cast on weight) ......... 9421504 A.R. .15
('5 oz.) (size cast on weight)......... 9421506 A.R. .15
(2 oz.) (size cast on weight) ......... 9421508 A.R. .20
(215 oz.) (size cast on weight)........ 9421510 A.R. .19(3 oz.) ............................ 3758709 A.R. .24
(1 oz.) type B ...................... 3771620 A.R. .20(2 oz.) type B ..................... 3771621 A.R. .25(4 oz.) type B ...................... 3771622 A.R. .35
(2 oz.) type D ..................... 3771629 A.R. 25
(4 oz.) type D ...................... 3771630 A.R. 35quick take-off ('/ oz.) ............... 3830798 A.R. 15quick take-off (1 oz.) ............... 3830799 A.R. 15quick take-off (2 oz.) ............... 3830801 A.R. 20
54-55 1'/2 TON w/2-SPD. (1st Ser.) ...... splined type (cast iron hub- 59/64 flange)54-55 2 TON (1st Ser.) ................ (stmp'd. 3702299) ............... 3702299 2 26.75
$NOTE: 3705785 Bolt (5/8 -18 x 2 27/32 ) must be used w/3702299 Hub.60-62 Ser. 20-30 (exc. 4/WD, dual
wheels),60-62 Ser. 20 (4/WD) (2nd design),63-68 Ser. 20 (exc. D-D),63-66 Ser. 30 (exc. dual wheels),67-68 Ser. 30 (exc. 11,000 lb. axle) ..... 8 bolts (6',;,, O.L.) .................. 3760190 2 22.7560-62 Ser. 30 w'dual wheels ........... 8 bolts (5 31/
37 O.L.) ................. 3759854 2 22.7563-68 Ser. 20 w'dual wheels (exc. D-D),63-68 Ser. 30 w % dual wheels ........... .................................. 3819779 2 22.7565-67 Ser. 20 w/leaf type spring ........ .................................... 2403660 1 29.5067 Ser. 30 (exc. 133 W.B.) (w/11000
lb. axle) ..................... 59/ fig. thk. ....................... 3714727 26.2563-65 CORVETTE wdisc. brakes ...... SPINDLE, w/bolts ................... 3820239 2 23.9565-68 CORVETTE w/disc brakes ....... SPINDLE, w/bolts ................... 3872476 2 23.9563-68 CORVETTE .................... FLANGE ASSY., rear wheel spindle .... 3839830* 2 13.45
*NOTE: When using 3839830 on 1963 1st design models it will be necessary to usewasher 3830252.
K IT, Rear Wheel Hub Conversion
40-47 UTILITY(exc. 2-SPD.),46-47 2-SPD. w/hypoid gears........... (splined) ......................... 3689081: 2 3.35
;NOTE: Consists of: 1 Spacer, 1 Cap, 1 Gasket, 1 Seal, 5 Bolts, and 5 Washers.
5.809 DRUM ASSY.—DISC, Front and Rear Wheel Brake
38-39 HA, JA ........................38-39 PASS. , '-, TON,38-42 HD, JD, KD, AL, BL,40-50 '2 TON .........................40-48 PASS . .........................38-40 HB, JB, KB,38-42 COMM.,46-50 ' 2 TON ........................39-40 COE ..........................41-50 UTILITY,,,,,,,,,,,,,,40-52 UTIL.wiH.D. on WB, WC (exc. WA)46-52 ', TON ........................46-52 1 TON,,,,,,,,,,47-52 3.
4 TON (exc. D-D) .. •... .... ... .
47-52 D-D, 1 TON w/sgl. rear wheels47-52 1 TON w/dual rear wheels ........49-50 PASS . .........................51-58 PASS.,CORVETTE(exc, H.D. BRK./
Susp., metallic linings, TAXI),59-62 CORVETTE (exc. H.D.
Brake/Susp., metallic linings)58 TAXI,59-62 PASS. (exc. metallic linings),63-64 PASS., CORVETTE (exc,
metallic linings, Sp./Per.),65-68 PASS. (exc. metallic brakes),65 CORVETTE ,,,,,,,,51-59 'z TON (exc. P/Trac.),60-63 52 TON .........................64-67 Ser. 10 (exc. 4/WD) ..............64-68 Ser. 10 ........................51-53 UTILITY,54-55 1'z TON (1st Ser.) (exc. 2-SPD.)51-55 ALL w/Prop. Brake (1st Ser.).... .53-59 TON (exc. 14" brake),60-67 Ser. 20 (4,'WD, D-D),68 Ser. 20 (4/ WD) ..................
front,
rear,frontand rear ...................... 601985 A.R 12.20
front .............................. 602432 2 14.75rear (also used on V, W, with cast iron
drums) .......................... 603688 2 31.75front .............................. 604718 2 22.75rear .............................. 609807 2 20.95rear .............................. 609808 2 24.75front.............................. 3847128 2 17.95front ............................. 3847129 2 20.75front (daub of white paint on web) .... 3847698 2 20.75front and rear ...................... 3690338 4 11.25
front and rear,
rear .............................. 3868801 2 12.15
front and rear,front and rear,rear............................. 3846271 A.R. 13.50
rear ........................ ..... 3696522 2 31.65parking........................... 591614 1 (5.610)
rear...............................3754300 2 20.95
5.806-5.809c-1967
912
Chevrolet Motor Division
General Motors Corporation
53-59 , 1 TON,60-67 Ser. 20 (D-D),60-66 Ser. 30 (D-D) w/7.50 x 17, 8.19 x
5 tires,67 Ser. 30 (D-D) (exc. 11000 lb.
axle SGL. SPD.) .............. front .............................. 3754332 2 18.7553-55 ' TON (exc. D-D) ............... front w/6.50 x 16-6 ply tires,53-59 1 TON,55-62 D-D (2 nd Ser. ),63-67 Ser. 30 (D-D) ................... front, w/7.00 x 18; 8 x 14.5-6-8 ply;
6.50 x 16-6 ply, 7.00 x 16-6 ply;7.50 x 16-8 ply tires,
58-59 Ser. 3E w/duals ................. 7.00 x 17.5 tires ................... 3754314* 2 18.75*NOTE: Pilots on knurler shoulder of bolt cannot be interchanged with 3754332 which pilots on
threaded shank section.53-59 1 TON,55 D-D (2nd Ser.) .................. rear, w/7.00 x 18; 7.50 x 17,56-59 D-D w/14" brake or duals ........ 8 x 19.5 tires .................... 3754313 2 24.7553-55 UTILITY (1st Ser.),67 Ser. 30 (D-D) w/ 11000 lb. rr. axle front .............................. 3754299 2 22.7554-55 1'2 TON w/2-SPD. (1st Ser.),54-55 2 TON (1st Ser.),67 Ser. 30 w/11000 lb. axle ......... rear .............................. 3754317 2 31.7553-62 CORVETTE w/metallic linings
(exc. H.D. Brake/Susp., P.G.),57-58 PASS. w/metallic linings,67 PASS. w/metallic linings......... front and rear,59-62 PASS. w/metallic linings,63-66 PASS., CORVETTE w/metallic
linings (exc. Sp./H/Per.),67-68 PASS. w/metallic linings......... rear ............................. 3869537 A.R. 14.8557-62 CORVETTE w/H. D. Brake/Susp. . front .............................. 3784117® 2 20.75
®NOTE: 3776926 Brake Drum Fan must be used.57-62 CORVETTE w/H.D. Brake/Susp. . rear .............................. 3776932t 2 20.80
1 NOTE: 3776935 Brake Drum Fan must be used.58-59 '2 TON w/P/Trac ................ rear .............................. 2346809 2 13.2559-62 PASS. w/metallic linings ........ front .............................. 3782993 2 16.0059-62 PASS. (exc. metallic linings),63-64 PASS., CORVETTE (exc. metallic
linings) ...................... front .............................. 3830166 2 16.2560-67 Ser. 20 (exc. 4/ WD, D-D,
6.50 x 16-6 ply tire)........... rear .............................. 3857752# 2 20.50#NOTE: Use as single rear wheel drum assy.
60-63 Ser. 20 (4/WD) .................. front (Budd 82517) ................. 2408346 2 18.5060-68 Ser. 20-30 (exc. 4/WD, D-D) ...... front,63-67 Ser. 20 w/6.50 x 16-6 ply (exc.
D-D, 4/WD),68 Ser. 20-30 (D-D),64-66 Ser. 20 w/dual wheels (exc. D-D,
4/WD) ..... .................. rear .............................. 3846354 2 20.7560-62 Ser. 30,63-68 Ser. 30 wdual wheels ........... rear .............................. 3814943 2 25.2563-68 Ser. 30 (exc. duals) .............. rear .............................. 3831784 2 24.2563-64 PASS., CORVETTE w/metallic
linings (exc. Sp./Per.)......... front .............................. 3830167 2 16.7563-64 CORVETTE w/Sp./Per., Metallic
Brakes, Fan Cooled ........... front ...................... ........ 3843900 2 21.5063-64 CORVETTE w/Sp./Per., Metallic
Brakes, Fan Cooled ........... rear .............................. 3841831 2 22.3064-68 Ser. 10 (4/WD) .................. front (Budd 89388) .................. 2459604 2 16.5064-68 Ser. 20 (4/WD) .................. front (Budd 89401) .................. 2459622 2 19.7564-67 G-10 w3,36 ratio ............... rear .............................. 3853712 2 12.2064-66 G-10 w/4.11 ratio,64-66 G-10 w/P/Trac., 3.73 ratio ....... rear,64-68 G-10 ........................... front ............................. 3853799 2 13.2565-66 Ser. 10 w/leaf type spring ........ rear .............................. 2457051• 2 14.1565-66 Ser. 20 w/leaf type spring........ rear .............................. 2458493• 1 22.1565 CORVETTE (exc. metallic brakes),65-68 PASS. (exc. metallic brakes) ..... front .............................. 3872326 2 14.7565-68 PASS. w/metallic brakes......... front .............................. 3872384 2 12.0567-68 G-20 ........................... rear .............................. 3894453 2 15.5067-68 G-20 ........................... front .............................. 3905830 2 17.50
3-1967Chevrolet Motor DivisionGeneral Motors Corporation 913
5.809
65-68 CORVETTE ................... DISC, front w/hub.................... 3867311 2 29.7565-68 CORVETTE .................... DISC, rear........................... 3865905 2 28.1067 PASS. w/disc. brake ............. DISC, front w/hub .................... 3901099 2 (6.307)67 PASS wi disc brake .............. DISC, front w/hub .................... 3933936 2
5.810 FAN—SPRING, Brake Drum
60-62 CORVETTE w/H.D. Brake/Susp. front, cooling ...................... 3776926 2 3.5460-62 CORVETTE w/H.D. Brake/Susp.,62 CORVETTE w/H.D.,63-64 CORVETTE w/Sp./Per. ......... front, cooling ...................... 3821105 2 3.3963-64 CORVETTE w/Sp./Per. ......... rear, cooling ...................... 3776935 2 3.5438-62 PASS., CORVETTE (exc. H.D.
Brake /Susp.),63-67 PASS., CORVETTE (exc. Sp./Per),67 Ser. 10 (exc. 4/WD),68 Ser. 10 ......................... SPRING (32'/4 free length) ............. 3694290 A.R. .9553-57 1 TON w/dual wheels,55-57 D-D (2nd Ser.) w/dual wheels..... SPRING, rear brake (45 O.L.).......... 2332713 2 1.7553-57 3/4 , 1 TON w/single wheels ....... SPRING, front and rear brake (38/2 O.L.) 2332714 A.R. 1.60
5.811 SP ACER—GASKET, Front and Rear Wheel Hub or Drum
51-53 2 TON ......................... front wheel (4 15/, 6 I.D. x 8% O.D. x /
thk.-5 holes) .................... 3697154 2 .7538-48 PASS. (exc. HB, JB),51-59 !2 TON,60-68 Ser. 10 (exc. 4/WD) ............. GASKET, front brake drum,65 Ser. 10 ........................ rear brake drum (41, x 6°4, O.D.) . 476518 2 .1238-40 T, V, W (w/2 speed axle only on W) GASKET, rear hub with '4 axle bolts 604360 2 .1540-47 UTILITY ..... ....... ...... GASKET, rear hub with Y axle bolts. .. 3653928* 2 .50
*NOTE: Not used w/splined type shaft and hub.46-66 ?;, 1 TON,67-68 Ser. 20 ......................... GASKET, rear hub / axle bolts (2% I,D.67-68 Ser. 30 (exc. 11,000 lb. axle)..... x 4''l 6 O.D.) ....................... 3680995 2 .2065-66 Ser. 20 w/leaf type spring ........ GASKET, rear axle shaft .............. 23588690 2 .05
5.812 BOLT—STUD, Hub or Drum (Front and Rear Wheel)
BOLT, Front Hub
38-40 H, J, K (exc. FA, GA, HA, JA, KA,KH),
41-42 COMM.,46-50 'z TON .........................38-42 UTILITY (exc. LR) .............. .................................... 370465t 12 .40.................................... 3683850 10 .4038-60 PASS. (1st design) (exc. HB, JB),51-61 ' 2 TON (exc. P/Trac.),53-60 CORVETTE (1st design),62 Ser. 10,63-65 Ser. 10 (4/WD) .................. ('/6_20 x 1'/e) ...................... 3829376t 12 .4039 COE,40-55 UTILITY w/H.D. WB, WC (1st Ser.)
(exc. WA),67 Ser. 30 (D-D) w/11000 lb. rr. axle drum to hub ....................... 3650739 12 .4046-55 1 TON,53-55 3 TON (exc, D-D),55 D-D (2nd Ser.) .................. (w/duals)......................... 3680865 16 .4046-59 3;, 1 TON,60-66 Ser. 20-30 (exc. 4/WD) ........... (w/sgl. rear wheels) ................ 3849110t 16 .4046-55 1 TON,53-55 '; TON (exc. D-D),55 D-D (2nd Ser.) .................. drum to hub (w/duals)............... 3681333 16 .4046-53 UTILITY (exc. 0) ............... .................................... 3682387 10 .4554-55 UTILITY (1st Ser.),67 Ser. 30 w/11000 lb. rr. axle....... (s/e x 18, 4 6 lgth.) .................. 3705783 10 .45
5.809-5.812 &_1967
914Chevrolet Motor Division
General Motors Corporation
56-59 '4, 1 TON,60-62 Ser. 30 w /dual wheels,63-66 Ser. 20-30 w/dual wheels,67 Ser. 20-30 (exc. D-D, 4/WD),68 Ser. 20 (D-D),68 Ser. 30 (exc. 4/WD) .............. drum to hub ........................60 PASS. (2nd design),61 PASS., '2 TON,60-65 CORVETTE (2nd design),62-67 PASS.,63-67 Ser. 10, G-10-20 (exc. 4/WD)...... ('/6-20 x 1 3/8) ......................60 Ser. 30 (D-D) w/H.D. frt. spring,61-68 Ser. 30 (exc. STEPSIDE),63-68 Ser. 20 w/127 W.B. (exc. Pickup,
Panel 4/WD),63-67 Ser. 30 w/133 W.B. (exc. Pickup,
Panel),63.67 Ser. 30 (D-D) .................. ( /64 dia. serrated shldr.- 3 4 head dia.).65-66 CORVETTE w/disc. brakes ...... ('/6_20 x 1 3/4 ) ......................66-67 Ser. 20-30 (exc. D-D, 4/WD),68 Ser. 20-30 (exc. 4/W.D.) .......... ....................................67 CORVETTE ................... (/-2O x 1 '/4) ......................67 PASS. w/disc brakes ............ front ..............................57-59 Ser. 3A w/4/WD ................. STUD, front ( 5/ 6 -24 x S/ 6 -18 x 1'/) .....57-59 Ser. 3E-3G w/4/WD (exc.
locking hub) .................. STUD, front .........................66-68 Ser. 20 (4/WD) .................. STUD, front ( 3/8 -16 x 1"/ 6 ) ............60-68 Ser. 20 (4/WD) .................. STUD, front (
12-20 x 1'.;)..............
65-66 Ser. 20 w/leaf type springs ....... STUD, rear ..........................NOTE: Also listed in rear hub section of this group.
3757999 16 .20
38516771 A.R. .40
3778368 A.R. .253864028 A.R. .10
3883323 16 .353910340 A.R. .153898007 A.R. .153747236 28 .65
3749873 A.R .602403692 12 .302401959 16 .252361098• 8 .35
BOLT, Rear Hub
NOTE: (front) shown in column at right indicates part is also used as Front Hub Bolt.38-40 UTILITY (exc. COE) ............ .................................... 367017 2033-35 CA, CB, DA, DB, EA, EB, ED .... .................................... 370465 1238-42 PASS., COMM. (exc. FB),46-59 PASS.,46-59 ', Z TON (exc. P/Trac.),60-62 Ser. 10,53-59 CORVETTE,63-64 Ser. 10 (4/WD) (1st Ser.) ........ (7^6-2o x 1'/) ...................... 3829376 A.R.38-46 UTILITY ...................... (use w/hubs having f1g. thickness of
29/3, on reg. prod. axles and fig.thickness of 2 / 2-SPD. andhvy, duty axles) ................. 5238559 20
39-42 VF, Vi4, VN, WD, WE, WF, Y, M... (use w/hubs having fig. thickness of2B/2
on 2-SPD. and hvy. duty axles) . 3668105 20
4040
40
40
35
©-1967Chevrolet Motor Division 5.812General Motors Corporation 915
46-59 3 ,, 1 TON w'sgl. wheels60-67 Ser. 20-30 (D-D),
HUB BOLT CHART
PartNo. A B C
367017 221/32 9/q 31/32
370465 117/2 6a 37/ 4
2351583 1°/16 , 's/23650739 13'/64 s64
3668105 3 1 I,, 9/3, 1'/a3680865 15164 1564 7/63680991 237/4 1664 43/643681333 j31/
4 15/643682153 321/64 32 15323682387 279/64 932 9163682389 3332 932 29323683850 2'/32 °/2 '/63694508 3'32 °/2 3,43697043 315/2 X32 13705783 131/32 9/2 °/163705784 2e 9/12 4
3705785 3Y8 32 13726228 2°i6 a 5163757999 1 9/32 /4 113778368 14/64 5/64 T'23819780 2'R 5 15,
3829376 158 Y, 21 64
3849110 16364 5/6,41
/6,3849118 215;, 75/61 29/323851677 1 5
3864028 163/6, 15 6421",
64
3883323 115/16 73z 19323898007 2 1/4 273 2
3910340 2 p
5238559 2136. 9,, 2,
D E F
133) 91 _18 23 832 "6-20 179 a23
32 '16-20 1516
. -20 1!.1 2* ,, 9, —18 225„1',B I
2 —20 19i,1 64 12 —20 214
4 /2 —20 11/1 57/64 s/8 —18 33Rd1 2 964 SIB —18 2,12932 8
— 18 213,1
5 'X 169 p^1, -10 1 31 q
23/'16 SIB — 18 215'1,u sB —18
18 s/a —18 111161 2 '3 5 —18 219 1,1 314 8 —18 227/,,1 '8 2 —20 2 4 61 2 —20 ls;6
^^e 2
—20 113/,,,
1 271
—20 2'-,1 3
3/6 ?16-20 138
1i;6 ';-20 13/
1164 2 —20 21 5/6d 6 -20 1361 79 ;. '12-20 1' 4V, 1 2 —20 123„ ,
29 ^ilfi -20 13”
—20 131 2'1/32 9/6-18 2"72
60-62 Ser. 20 (4 /WD) (1st design) ....... (use w/forged hub having 5 5 flange)46-59 3.4, 1 TON w; sgl. wheels,60-67 Ser. 20 (D-D),60-62 Ser. 20 (4/WD) (1st design) ....... (use w/cast hub having '/e flange)....
*NOTE: Not used on 1955 1 TON models w/18 x 5.0 wheel equipment.46-55 1 TON,53-55 '.; TON (exc. D-D),55 D-D (2nd Ser.) w; dual wheels ..... (use w,'forged hub having 5/ flange)...46-50 UTILITY (exc. 0) ............... (use w/cast hub) .......... .46-50 UTILITY (exc. 0) ............. . . (use w/forged hub) .................46-55 1 TON,53-55 3 , TON (exc. D-D),55 D-D w dual wheels (2nd Ser.),56-59 ' 4 , 1 TON w/dual wheels,60-62 Ser. 20 (exc. D-D, 4/WD),60-62 Ser. 30 (exc. 4;1WD),62 Ser. 20 (4 /WD) (2nd design),63-67 Ser. 20 (exc. D-D, dual wheels),63-67 Ser. 30 (exc. dual wheels) (exc.
11000 lb. axle) ............... ( 2 -20 x 2 5/ 6 ) . . . . . . . ...............51-53 UTILITY ................ ..... (use w/forged hub having 11, flange).51-53 UTILITY ................ . ...... (use w/cast hub having 15 1 6
flange)54-55 UTILITY (1st Ser.),67 Ser. 30 (w 11000 lb. axle) ........ (use w/forged hub having "/,, flange)..54-55 UTILITY (1st Ser.),67 Ser. 30 (w/11000 lb. axle) ........ (use \v hub having ' 5
/ 6 flange)58-59 2 TON wiP/Trac ................
.. .rear ('/ 6 -20 X
25/2 thd. lgth.) .........
60-65 CORVETTE,60-68 PASS.,63-67 Ser. 10 (exc. 4!WD),63-64 Ser. 10 (4, WD) (2nd Ser.),64-68 G-10-20,65 -67 Ser. 10 (4 WD) ................. (' -20 x 1 '6) ............63-66 Ser. 30 w /dual wheels,65-67 Ser. 20-30 w /P/Trac ............ .65-66 CORVETTE w 'disc. brakes ...... (?16-20 x 1 314 ) ,,,,,,, ,67 CORVETTE ...................
, , , , , , , , , , ,(' -20 x 1
4) ..................5.812
916
3849110* 16 .40
3849118* 16 .40
3680991 16 .403682153 20 .503682389 20 .50
3726228 16 .353694508 20 .503697043 20 .50
3705784 20 .45
3705785 20 .502351583 12 .35
3851677 A.R. (front)
3819780 16 .303864028 A.R. (front)3910340 A.R. (front)
0-1967Chevrolet Motor Division
General Motors Corporation
5.813 NUT—NUT ASSY., Hub—Front and Rear
38-42 PASS., COMM.,46-66 PASS., CORVETTE,
14 TON (exc
' 2 TON w/P/Trac.),67-68 ALL ........................... wheel hub bolt (" —20) ............. 358501 A.R. .1538-46 UTILITY (exc. LR) ............. hub, front (°,1 6 -18 thick) ............ 3742251 A.R.(6.172)46-55 ' „ 1 TON w/sgl. wheels (1st Ser.) ('4-20 wrench size 3/,) .............. 3680920 32 .2046-49 COMM. w,'dual wheels .......... (' -20) ........................... 9417614 32 (8.915)46-53 UTILITY ....................... wheel hub bolt ( s 4-18—'( thk.) ....... 373912 A.R. .2054-55 UTILITY (1st Ser.),67-68 Ser. 30 w '11000 SGL. SPD. axle .. lock (' —l8) ....................... 3724246 30 .4555-68 ',, 1 TON w 'sgl. wheels (2nd Ser.) (' 2 -20 wrench size "ib) ............. 3719845 32 .2556-62 'a, 1 TON w'dual wheels,63-68 Ser. 10 thru 30 w/dual wheels ..... ('2-20) ....... .................... 3726212 32 .2563-66 CORVETTE w/knock off wheels .. ( -20) ........................... 3852554 A.R. .4C63 CORVETTE .................... NUT ASSY., left (w/knock-off wheels) .. 3819543 2 14.5.563 CORVETTE .................... NUT ASSY., right (w;'knock-off wheels) 3819544 2 14.5564-66 CORVETTE .................... NUT ASSY., left (w/knock-off wheels) .. 3853795 2 15.2564-66 CORVETTE .................... NUT ASSY., right (w/knock-off wheels) 3853796 2 15.2565-66 (D-D) .......................... NUT ASSY.. wheel hub bolt (,-20) .... 2346840 4 .04
5.815 DEFLECTOR, Rear Wheel Hub and Drum
38-42 COMM.,46-59 '2 TON (exc. P;'Trac.),60-62 Ser. 10,63 Ser. 10 (4/WD) (1st Ser.) ......... rear brake drum oil ................. 378548 2 .7038-50 UTILITY ...................... rear wheel ........................ 473632 2 1.4538-48 PASS. ......................... rear brake drum oil (3 l/ 6 I.D. x
6 58 O.D.) ........................ 593253 2 .6646-59 ';, 1 TON,60-67 Ser. 20 (D-D),60-62 Ser. 20 (4/WD) (1st design) .......49-54 PASS.,53-55 CORVETTE ....................51-53 UTILITY,54-55 1, TON (1st Ser.) (exc. 2-SPD.),67 Ser. 30 (w/ 11000 lb. axle) ........54-55 1', TON w/2-SPD. (1st Ser.),54-55 2 TON (1st Ser.) ................60-67 Ser. 20 (exc. D-D, dual wheels),60-61 Ser. 30 w single wheels,61 Ser. 30 w dual wheels (2nd design),62-67 Ser. 20 (4 'WD) (2nd design),62 Ser. 30 (exc. P,Trac.),63-67 Ser. 30 (exc. 11000 lb. axle) ......60-61 Ser. 30 w 'dual wheels (1st design),62 Ser. 30 w'P/Trac . ..............63-65 Ser. 10 (exc. 4 /WD),63-65 Ser. 10 (4/WD) (2nd Ser.) .........63-67 Ser. 20-30 w /dual wheels........ .
rearhub .......................... 3680992 2 1.35
rear brake drum oil (4'/, I.D. x 5'-x O.D.) 3687775 2 .56
rear hub oil (5',4 I.D. x 8 2 94, O.D.) .... 3697705 2 1.45
rear hub oil (5"/,, I.D. x 8 294, O.D.) ... 3702291 2 1.45
rearhub oil ........................ 3760191 2 1.40
rearhub oil ....................... 3759855 2 1.40
rear brake drum oil ................. 3814218 2 .70rear hub oil ........................ 3819781 2 1.40
5.816 RETAINER — RING—BOLT—SPACER, Rear Axle Shaft Bearing
38-42 COMM.,46-59 '2 TON (exc. P'Trac.),60-62 Ser. 10,63 Ser. 10 (4/WD) (1st Ser.) ......... inner, axle shaft bearing ............ 370251 238-54 PASS.,53-55 CORVETTE .................... inner, axle shaft bearing ............ 472521 255-56 PASS.,56 CORVETTE ................... . wheel bearing (hub dia. 2%) ......... 3708829 257-58 PASS..59-60 TAXI,57-61 CORVETTE,62-63 PASS. w/4.11, 4.56 axle,62 CORVETTE (exc. metallic linings,
3.55 axle) .................... axle shaft and bearing .............. 3739104 258-59 '; TON w / P/Trac . .............. wheel bearing ..................... 2346837 2
?-1967Chevrolet Motor Division
.15
.14
.56
.56.95
5.813-5.816General Motors Corporation 917
59-61 PASS. (exc. TAXI),62-63 PASS. (exc. 4.11, 4.56 axle),62 CORVETTE w/metallic linings,
3.55 axle,64 PASS . ......................... axle shaft and bearing .............. 3755959t 2 .56
`NOTE: Held in place by rear flange plate and brake assy. attaching parts.63-65 Ser. 10 (exc. 4/WD),63-65 Ser. 10 (4WD) (2nd Ser.) ......... inner axle shaft and bearing ......... 3819585 2 .1.538-53 UTILITY,54-55 1'z TON (1st Ser.) (exc. 2-SPD.),67-68 Ser. 30w '11000 lb. axle ......... RING, rear hub bearing retaining ....... 594324 2 .4046-6 ' , 1 TON (exc. 11000 lb. axle).... RING, rear hub bearing retaining ....... 3663672 2 .4054-55 1' 2 TON w'2-SPD. (1st Ser.),54-55 2 TON (1st Ser.) ................ RING, rear hub bearing retaining ....... 3703709 2 .5055-57 PASS..57 CORVETTE,58-63 TAXI (1st design),58-62 CORVETTE w P'Trac.,63 POLICE (1st design) ............ RING, retainer (Hy .11542-22) .......... 7451110 2 2.6055-62 PASS. (exc. 1958 TAXI),56-62 CORVETTE (exc. P/Trac.),63-64 PASS. (exc. 1st design TAXI,
POLICE),63 TAXI, POLICE (2nd design) ...... RING, retainer (1'/ I.D. x 1"), O.D.) ... 3851557 2 .5558-59 'z TON w P Trac . .............. RING, retainer....................... 2409730 2 .4555-59 PASS . ......................... BOLT, shaft and wheel brg. retainer56-59 CORVETTE ................... ( / 24 x 1 3
'i b )..................... 3788231 8 (5.002)57 PASS.. CORVETTE,58-64 TAXI,58-61 CORVETTE (exc. P.O.),62-64 POLICE ....................... SPACER, bearing .................... 3750617 2 .2963-68 CORVETTE .................... SPACER, rear wheel bearing........... 3820224 1 1.00
5.819 GASKET, Whe el Hub and Drum Oil Deflector, Front and Rear
38-40 UTILITY (exc. COE) ............ front,38-42 COMM.,38-48 PASS.,46-59 1
2 TON (exc. P/Trac.),60-62 Ser. 10,63 Ser. 10 (4 WD) (1st Ser.) ......... rear brake drum (412 I.D. x 6'91 6 O.D.)., 365673 A.R. .1538-50 UTILITY (exc. LR) .............. rear, disc and dual wheel hub oil outer
38-40 HB, JB, KB38-42 COMM.,46-50 ' 2 TON.....38-39 HA, JA ........................40-48 PASS ..........................51-61 ' 2 TON (exc. 4 'WD) ............. .39-40 WB, WC, COE w/H.D. on WB, WC,41-55 UTILITY (1st Ser.),67 Ser. 30 (D-D) w 1100 lb. rear axle46-59 3
a , 1 TON (exc. DR),60-64 Ser. 20-30 (exc. 4'WD) ...........65 Ser. 20-30 (exc. 4/WD),67 Ser. 20-30 (D-D) (exc. 11000 lb.
axle) ........................66-67 Ser. 20 (exc. D-D),66-67 Ser. 30 ........................49-54 PASS ..........................53-62 CORVETTE,,,,,,,,,,,,,,,58-59 ', TON w P'Trac ................55-64 PASS..........................56-62 CORVETTE,,,,,,,,,,,,,,,,,60-64 PASS..........................63-64 Ser. 10 (exc. P Trac. 4 /WD),63-64 Ser. 10 (4 WD) (2nd Ser.)........ .
deflector (6'.e I.D. x 8 1, O.D.) .. , ... 359428 2
front, oil deflector (41/ I.D. x 4 1=;,1 6 O.D.) 370959 2
front brake drum oil deflector(4',z I.D. x 6°/ 6 O.D.)(has 3 holes 3/Adiameter and 7 holes) (15/e diameter) . 476124 2
front brake drum .................... 3650740 2
front and rear, brk. drum oil deflector
front,
rear (5 1,/ I.D.-8 holes) .............. 3681204 2frt. and rear, brake drum oil deflectorfront (33 ID. x5"/aO.D.)(five 6 holes) 3779684 2axle shaft and wheel brg. retainer .... 2346839 4wheel bearing retainer, rear (4 holes
'a I.D.) (4 's x 4 ' 1/32 ) ............... 3772374 2rear axle housing flange inner........ 3775360 2rear brake drum (43B I.D. x 6'/ 6 O.D.)
(6 holes— 15 3 dia. ) ................ 3819586 2
15
06
15
20
15
1505
1915
15
5.816-5.819 x_1967
918
Chevrolet Motor Division
General Motors Corporation
5.820 RING, Rear Wheel Hub Clamp
38-46 UTILITY.......................
46-55 1 TON,53-55 '/4 TON,55 D-D (2nd Ser.) w/dual wheels ....46-53 UTILITY.......................
(8'/e O.D. x 19/ 2 dia, bolt holes; use
w/ 6 dia. hub bolts) .............. 475068 A.R. 2.00
(29/ D. x 8/8 O.D.) ................ 3680931 A.R. 2.25( 21/3 2
dia. holes, use w/ 5 /e dia.hub bolts) ....................... 3682391 A.R. 2.1C
5.822 SEAL—SEAL UNIT—"O" RING—SHIELD, Rear Axle Shaft Bearing or Hub
38-42 COMM.,46-59 ' 2 TON (exc. P/Trac.),60-62 Ser. 10,63 Ser. 10 (4/WD) (1st Ser.) ......... axle shaft oil—two leathers.......... 3814280 2 2.3538-47 UTILITY ....................... rear wheel hub oil .................. 3681195* 2 2.90
*NOTE: 3681195 not used w/splined type shaft and hub.38-54 PASS.,53-55 CORVETTE .................... axle shaft oil ...................... 3705796 2 1.8546-65 3/„ 1 TON,66-68 Ser. 20-30 (exc. 11000 lb. sgl. spd.) rear wheel inner bearing oil .......... 3883386 2 2.4558-59 12 TON w/P/Trac.,65-66 Ser. 10 w/leaf type springs ....... axle shaft oil (Dana 18516-6J ........ 2360331 2 1.5554-55 1';2' TON (1st Ser.) w/2-SPD....... rear hsg. inner brg. race (rubber 2/B54-55 2 TON (1st Ser.) ................ I.D. x 3'/, 6 O. D.).................. 3708819 2 1.0556-57 CORVETTE w/H.D.,58-62 TAXI,58-62 CORVETTE w/P/Trac.,63-64 TAXI, POLICE ................. (stamped 3750294) (roller bearing) .... 3750294 2 1.0563-68 CORVETTE .................... rear wheel outer bearing............. 3794006 2 .7563-68 CORVETTE ................... rear wheel inner bearing ............. 3794002 2 .7563-64 Ser. 10 (exc. 4/WD),63-64 Ser. 10 (4/WD) (2nd Ser.)......... axle shaft oil ...................... 3819584 2 1.4564-68 G-10,
65 PASS. w /10 bolt ................ rear wheel......................... 3832418 2 .8065 PASS., w/12 bolt,65-68 Ser. 10, G-20,66-68 PASS . ......................... rear wheel (8% ring gear)............ 3843648 2 .9565-66 Ser. 20 w/leaf type spring ........ oil (Dana 30662-2) .................. 2366119• 2 1.7547-53 UTILITY,52-55 1 2 TON (exc. 2-speed),67-68 Ser. 30w/11000 lb. sgl. spd. axle .. rear wheel bearing oil ............... 3880674 2 3.1554-55 1', TON w/2-SPD. (1st Ser.),54-55 2 TON (1st Ser.) ................ SEAL UNIT, rear wheel ball bearing .... 3717672 255 PASS .......................... SEAL UNIT, rear wheel ball bearing.... 3717671 2 1.6556 PASS .......................... SEAL UNIT, rear wheel ball bearing.... 3730317 2 1.6557 PASS., CORVETTE ............. SEAL UNIT, rear wheel ball bearing, , , , 3739435§ 2 1.7058-59 PASS. (exc. TAXI),58-59 CORVETTE (exc. P/Trac.)....... SEAL UNIT, rear wheel ball bearing.. , , 3749981§ 2 1.7060-62 PASS.,60-62 CORVETTE (exc. P/Trac.),63-64 PASS. (exc. TAXI, POLICE)...... SEAL UNIT, rear wheel ball bearing.... 3772999§ 2 1.70
§NOTE: Consists of: "0" ring and seal assy., w/retainer.55-56 PASS .......................... "O" RING, rear wheel brg.56 CORVETTE .................... (2% I.D. x .103) .................... 3707389 2 .3557-59 PASS., CORVETTE,60-62 CORVETTE w/P/Trac.,61-62 CORVETTE w/metallic linings,61-64 TAXI ......................... "0" RING, rear wheel brg.63-64 POLICE ...................... (2% I.D. x .103) .................... 3739112 2 .3560-64 PASS. (exc. TAXI),60-62 CORVETTE (exc. P/Trac.)....... "O" RING, (2^/9 I.D. x .070) ............ 3772034 2 .3563-68 CORVETTE .................... SHIELD, rear wheel inner bearing dust .. 3820238 2 .33
-1967 5.820-5.822Chevrolet Motor Division
General Motors Corporation 919
5.829 NUT, Rear Axle
38-53 UTILITY,54-55 1';z TON (exc. 2-SPD.) (1st Ser.)67-68 Ser. 30 w/11000 lb. axle ......... hub adjusting, inner and outer ........ 473636 4 1.2046-66 %, 1 TON,67-68 Ser. 20-30 (exc. 11000 lb. axle) ... hub adjusting, inner and outer........ 3663657 4 1.2054-55 1'2 TON w,/ 2-SPD. (1st Ser.) ..... hub adjusting, (2/, I.D. x 3% O.D.)...54-55 2 TON (1st Ser.) ................ w/6 slots)......................... 3703711 4 1.5063-67 CORVETTE .................... rear wheel spindle flange (%-20), , . , , 378137 2 (6.022)63-64 CORVETTE,64 PASS., G10 ..................... rr. wheel spindle supt. strut adj. cam
('/-20) ................:........ 3691530 2 (7.395)65-66 Ser. 20 w'leaf type spring ........ rear wheel hub adjuster ............. 23588660 4 1.10
5.830 LOCK-WASHER, Rear Axle
38-53 UTILITY,54-55 1':2 TON (exc. 2-SPD.) (1st Ser.),67-68 Ser. 30 w /l1000lb. axle ......... hub adjusting ...................... 473629 2 .3046-66 ';, 1 TON,67-68 Ser. 20-30 (exc. 11000 lb. axle) ... hub adjusting, (2/33 I.D. w/11 lugs) ... 3663659 2 .3054-55 112 TON w/2-SPD. (1st Ser.),54-55 2 TON (1st Ser.) , , , , , , , , , , , , , , , , hub adjusting (2'/33 I.D. w/11 lugs). . . 3703703 2 .3065-66 Ser. 20w/leaf type spring , , , , , , , , hub adjuster (Dana 30637) ........... 2358867• 2 .1238-53 UTILITY,54-55 1'iz TON (exc. 2-SPD.) (1st Ser.),67-68 Ser, 30 w/11000 lb. axle ......... WASHER, hub adjusting ............... 473628 2 .3046-66 34, 1 TON,67 Ser. 20-30 (exc. 11000 lb. axle) ... WASHER, hub adjusting ............... 3663658 2 .3054-55 1';2 TON w/2-SPD. (1st Ser.),54-55 2 TON (1st Ser.) , , , , , , , , , , , , , , , , WASHER, hub adjusting, (2"/ 2 I.D. x
3"/ 6 O.D.-steel) ................... 3703704 2 .3063 CORVETTE (1st design) ......... WASHER, rear wheel spindle flange
(9 thk.) .......................... 3830252 2 .1563-68 CORVETTE (2nd design) ......... WASHER, rear wheel spindle flange
( 7/33thk.) .......................... 3839832 2 .30
5.839 RIN G, Tire Rim Locking
39-46 UTILITY (exc. P) ....... . .... . . . rim clamp (20 x 5.00S) (use w/wheel46-52 1'2 TON (exc. SBC) .............. asst'. 3651623, 3652176) • ......... 2039648 A.R. 8.5046-55 TON ............. . . . ...... rim clamp (15 x 5.50F) .............. 3680918 A.R. 4.9546-66 3„ 1 TON ...................... rim clamp (17 x 5.0, 6.0) (use w/wheel67-68 Ser. 20-30 (exc. D-D) ............ assy. 3681786, 3684454) ............ 3681788 A.R. 4.2046-63 %, 1 TON (1st design),65-66 Ser. 20-30,67 Ser. 20 ......................... rim side (17 x 5.0) (use w/wheel assy.67 Ser. 30 (exc. D-D) ............... 3681786, 3684454) ................ 23068460 A.R. 7.3046-55 1 TON,55 D-D (2nd Ser.),60-67 Ser. 30 ......................... rim clamp (18 x 5.0) (use w/wheel assy.68 Ser. 30 (CONY.) (exc. STEPSIDE) . 3682064) ........................ 3682062 A.R. 4.3546-55 1 TON,55 D-D (2nd Ser.),60-67 Ser. 30 ......................... rim side (18x 5.0)(use w/wheel assy.68 Ser. 30 (exc. D-D) ............... 3682064) ........................ 2306847• A.R. 7.3046-55 UTILITY (1st Ser.) (exc. 0) ...... rim clamp (use w/wheel assy. 3682076,
3682082, 3696712, 3715496)•••••.. 3696716 A.R. 4.2046-55 1^/2 TON (1st Ser.) ............... rim side (20 x 5.0)(use w/wheel assy.
3682076, 3715496.............. . 3707075 A.R. 8.85
46-55 2 TON (1st Ser.) ................ rim side (20 x 6.0) (use w/wheel assy.53-55 1';z TON w,/H.D. (1st Ser.) ........ 3682082, 3696012, 3703878 . , ...... 2279741 A.R. 8.9548-51 2 TON (exc. SBC) ............... rim clamp (20 x 6.5) (use w/wheel
assy. 3695970)••• ................ 3695975 A.R. 6.6048-51 2 TON (exc. SBC) ............... rim side (20 x 6.5) (use w/wheel assy.
3695970) ......•.•.• ............. 3695974 A.R. 6.6049-55 1 1,2, 2 TON (1st Ser.) ............. rim side (20 x 6.0)(use w/wheel assy.53 'Z TON w/H.D ................... 3693380,3696012, 3703874, 3726167) 2274258* A.R. 9.50
"NOTE: Also used on 1956-1958 models equipped with tube tires.
5.829-5.839 C-1967
920Chevrolet Motor Division
General Motors Corporation
51-55 2 TON (1st Ser.) ................ rim side (20 x 6.5) (use w/wheel assy.3696712, 3705226) ................ 3704948 A.R. 9.95
53-68 3,q TON ......................... rim clamp (16 x 5.50F) (use w/wheel
61-68 1 TON ......................... assy. 3812711, 2428262) .......... 2059902 A.R. 3.2560-68 Ser. 10,60-66 Ser. 20 (exc. D-D, 4/WD) ......... rim clamp (15 x 5.50F) (use w/wheel63-66 Ser. 20 (4/WD) .................. assy. 3778052-3778055-3785013)... 3778058 A.R. 2.5560-66 Ser. 10,60-66 Ser. 20 (exc. D-D, 4/WD) ......... rim side (15 x 5.50F) (use w/wheel63-66 Ser. 20 (4/WD) .................. assy. 3778052-3778055-3785013) ... 2406653 A.R. 4.9060-62 Ser. 30 (D-D) ................... rim side (17 x 6.0) (use w/wheel assy.63-67 Ser. 20-30 (2nd design) ........... 3 681 7 86-3 6 844 5 4-3 778924-3 82 961 6 .. 2284287! A.R. 7.3065 Ser. 20 (exc. D-D) ............... rim side (15 x 5.50) (use w/wheel
assy. 2495738-40) ................ 2495743 A.R. 3.3065-67 Ser. 20 (exc. D-D) ............... rim side (16 x 6) (use w/3860964) .... 3906582 A.R.67-68 Ser. 20 (exc. D-D) ............... rim side (16 x 6) ................... 22190560 A.R. 5.50
5.855 BEARING ASSY.-BEARING UNIT-CONE-CUP-SHIM, Rear Wheel
38-53 UTILITY ....................... outer (inner race stamped Hy KB11786,54-55 1/2 TON (exc. 2-SPD.) (1st Ser.),67-68 Ser. 30 w/11000 lb. axle ......... out race Hy 11786 Y) ............... 144525 2 10.4238-53 UTILITY ....................... inner (inner race stamped Hy KD 12051,54-55 1!Z TON (exc. 2-SPD.) (1st Ser.),67-68 Ser. 30 w /11000 lb. axle ......... outer race Hy 12051 Z) .............. 144527 2 13.6946-67 ',a, 1 TON ...................... inner (Hy D11786) (Hy 11786Y) ....... 188930 2 (5.536)46-68 'q, 1 TON ...................... outer (Hy B 11630) (Hy 11630 Z) ..... 188932 2 10.7854-55 1 TON w/2-SPD. (1st Ser.),54-55 2 TON (1st Ser.) ................ inner (stamped Hy B 12235YK) ....... 7450320 2 28.9554-55 1 TON w/2-SPD. (1st Ser.),54-55 2 TON (1st Ser.) ................ outer (stamped Hy KA 11950Z) ....... 7450323 2 15.7738-39 COMM.,40-59 1
:2 TON (exc. P/Trac.),60-62 Ser. 10,63 Ser. 10 (4/WD) (1st Ser.) ......... outer, w/roller (Hy OR 1502) ......... 111121 2 9.5438-54 PASS.,53-55 CORVETTE .................... outer, w/roller(Hy OR 1500) ......... 111119 2 8.2558-59 'Z TON w/P/Trac ................ (ND 88128 35/32 O.D. x 1/ I D.) I.D.)...... 954848 2 9.9663-67 CORVETTE .................... inner (Hyatt A-200233-Z) ............ 7451202 2 (5.447)63-68 CORVETTE .................... outer ...........................:. 7450700 2 (6.311)63-68 Ser. 10 (exc. 4/WD),63-68 Ser. 10 (4/WD) (2nd Ser.),65 PASS. w/12 bolt,66-68 PASS. w/10, 12 bolt,67-68 G-20 ........................... (Hy 1559 TS) ...................... 7451275 2 4.1464-67 G-10 w/3.36 ratio,65-67 G-10, 4.11 ratio (w/P/Trac.),65 PASS. w/10 bolt ................ .................................... 7451405 2 3.6664-68 G-10 w'3.73 ratio,64-68 G-10 w/P/Trac., 4.11 ratio,65-68 G-10 w/4.11 ratio (exc. P/Trac.) .. w/roller ........................... 7451459 2 6.0655-56 PASS.,56 CORVETTE .................... BEARING UNIT, roller bearing......... 7451414 2 18.9755-56 PASS.,56 CORVETTE .................... BEARING UNIT, w/retaining ring ...... 3799122 2 11.2857 PASS., CORVETTE ............. BEARING UNIT, w/retaining ring ...... 3799123 2 11.6257-58 PASS., CORVETTE,58-62 TAXI,59 CORVETTE,60-62 CORVETTE w%P/Trac........... BEARING UNIT, w/retaining ring63-64 TAXI, POLICE ................. (Hy JRN 1542 WAB-27).............. 7451415 2 20.5758-62 PASS. (exc. TAXI),58-62 CORVETTE (exc. P/Trac.)....... BEARING UNIT, w/retaining ring63-64 PASS. (exc. TAXI, POLICE)...... (NDRW 607BRSYIZ) ................ 907294 2 13.5063-64 CORVETTE .................... CONE, w/roller, outer (Hy A-141236Z) .. 7450699 2 (6.314)63 CORVETTE .................... CONE, inner......................... 7451205 2 (5.447)63-64 CORVETTE .................... CUP, outer bearing outer (Hy A-1412362) 7450698 2 (6.316)63 CORVETTE .................... CUP, inner .......................... 7451206 1 (5.447)63-67 CORVETTE .................... SHIM, rear wheel bearing (.097) ........ 3820233 1 .2563-67 CORVETTE .................... SHIM, rear wheel bearing (.103) ...... _ . 3820232 1 .2563-67 CORVETTE .................... SHIM, rear wheel bearing (.109) ........ 3820231 1 .25
©-1967Chevrolet Motor Division 5.839-5.855General Motors Corporation 921
63-67 CORVETTE .................... SHIM, rear wheel bearing (.115) ........ 3820230 1 .2563-67 CORVETTE .................... SHIM, rear wheel bearing (.121) , , , , , , , , 3820229 1 .2563-67 CORVETTE .................... SHIM, rear wheel bearing (.127) ........ 3820228 1 .2563-67 CORVETTE .................... SHIM, rear wheel bearing (.133) ........ 3820227 1 .2563-67 CORVETTE .................... SHIM, rear wheel bearing (.139) , , , , , , , , 3820226 1 .2563-68 CORVETTE .................... SHIM, rear wheel bearing (.145) ........ 3820225 1 .25
5.858 GREASE CAP-HUB CAP-COVER-COVER UNIT, Wheel
GREASE CAP
38-42 UTILITY (exc. COE),43-59 '/, TON w,'dual wheels, (exc. D-D),46-59 1 TON (exc. SBC, UJ, UK, VJ,
VK, H.D.),55-59 D-D w'dual wheels (2nd Ser.),60-66 Ser. 30,65-66 Ser. 20 w/6.50 x 16-6 ply,67 Ser. 20 (exc. D-D, 4/WD),67 Ser. 30 (exc. 133 W.B.,
11000 lb. axle) ...............38-42 PASS., COMM. (exc. HA),46-54 PASS.,46-59 1
2 TON (exc. 4/WD),
53-62 CORVETTE,56-60 PASS.,60-61 Ser. 10 (exc. 4/WD),63-66 Ser. 20-30 (exc. 4 /W'D, D-D),67-68 Ser. 20-30 (exc, D-D,
4 WD, 11000 lb. axle),67-68 G-20 ...........................39-40 COE,41-42 UTILITY w/H.D.,46-55 2 TON (1st Ser.),46-55 1'i TON (1st Ser.),46-59 SBC (exc. 1'i TON),48-0. 5 1'2 TON w'H.D. (1st Ser.),6 7 Ser. 30 (D-D) (w/11000 lb. axle)...46-62 ',, 1 TON (exc. 4/WD),63-66 Ser. 20-30 (D-D),67 Ser. 20-30 (D-D) (exc. 11000 lb.
axle) ........................47-53 UTILITY,54-55 1!z TON (exc. 2-SPD.) (1st Ser.),67 Ser. 30 w'11000 lb. axle .........54-55 1', TON «,'/2-SPD. (1st Ser.) ......55 PASS . .........................57-59 4 WD ..........................60-68 Ser. 10 (4 'WD) ..................60-61 Ser. 20 (4; WD) (exc. H.D. axle),62-68 Ser. 20 (4 !WD) ..................61-68 PASS.,62-68 Ser. 10, G-10 (exc. 4/WD),63-68 CORVETTE ....................
46-53 'a, 1 TON ......................47-53 ' TON .........................51-53 PASS. (exc. C) ..................53-55 CORVETTE ....................54 PASS. (exc. C) ..................54-55 2 TON (lst Ser.) ................54-55 'y, 1 TON (1st Ser.) ..............54-55 'z TON (1st Ser.) ................55 PASS. (exc. C) ..................55 l,2 TON (2nd Ser.) ................55-56 ' z TON (2nd Ser.) ................55 „ 1 TON (2nd Ser.) .............55-56 ';, 1 TON (2nd Ser.) (exc. D-D)....56 PASS. (exc. C) ..................
front (2 3 e-16thd.) ................ 365120 2 .80
front (25/64 O.D .) .................... 3744926 2 61
front (4'/2 O.D.) ..................... 3650731 2 1.25
front(2 5/ 6 O.D.) .................... 3768604 2 .65
rear hub and grease (plain 4 23/„ O.D.) 3779771 2 .75rear (plain-5'/ 2 O.D. w/5 holes 23/,) .. 3874373 2 1.13front(2"/, O.D.) ................... 3707121 2 .61front(23,,, O.D.) .................... 3747221 2 1 20front (3532 O.D.) (Dana 32001) ........ 2405965 2 .98
front (1',,a deep x 2 1/ O.D.) ........... 3820832 2 .60
front (1 1/4 x 2'/32 ) ................... 3775190 2 .63
HUB CAP
chrome (1111 6 O.D.) ................. 3680919 4 6.40chrome(9 7 O.D.) ................... 3683021 4 4.95chrome (99j6 O • D•).• ................ 3696493 4 4.70st. steel (less spinner) .............. 3716754 4 20.30st. steel (10 ! Y O.D.) ............... 3707030 4 5.35thistle gray (901 O.D.) ............... 3702898 4 4.95thistle gray (11 1, 6 O.D.) ............. 3702899 4 4.95chrome O.D.) ................... 3699748 4 4.95chrome (10 11 6 O.D.) ................ 3716713 4 4.80ivory(9 3/, O.D.) .................... 3717766 4 4.75chrome (white-9 3/4 O.D.) ............. 3715992 4 4.95ivory (10 15/ 6 O.D.) .................. 3717767 4 4.75chrome (white_10 15/ 6 O.D.) .......... 3716785 4 6.00chrome w/black trim (10 1 1 6 O.D.). , , , . 3721966 4 4.75
5.855-5.858 ©-1967
922
Chevrolet Motor Division
General Motors Corporation
st. steel .......................... 3725238 4 9.75black and white (9'i; O.D.) ........... 3725574 4 4.75black and white (10 5 ,' fi O.D.) ......... 3725576 4 4.95
.................................... 3731847 4 4.65black on white (9 34 O.D.) ............ 3734031 4 4.75chrome (9( O.D.) .................. 3734032 4 7.50black on white (10'5-^ 6 O.D.).......... 3743591 4 4.75chrome (10 15/ 6 O.D.) ................ 3743592 4 7.50
crossed flags-3 fins ................ 3744075 4 4.90
black emblem on beige ............ . 3752954 2 4.75frt. wheels ........................ 3765832 2 4.75
frt. wheels ........................ 3765837 2 4,7510 slots ........................... 3759120 4 10.95
crossed flags-6 fins (chrome)........ 3772740 4 4.67chrome-4 fins (10'1 6 O.D.) .......... 3783206 4 4.60front-white (10
234 2 O.D.) ............ 3781648 2 3.75
rear wheels,wheel carrier hub,
front and rear wheels (red on white)(10
23/32 O.D.) ..................... 3780114 A.R. 3.85
wheel carrier hub,front and rear wheels (chrome-1016
O. D.) ........................... 3780115 A.R. 6.75
56-58 CORVETTE .56 2 TON .........................56 34, 1 TON (exc. duals, D-D) .......57 PASS. (exc. C) .................57-60 '2 TON (exc. 4/WD) ..............57 -60 '; TON (exc. 4/WD) ..............57-60 , 1 TON (exc. duals, D-D).......57-60 ',, 1 TON (exc. duals, D-D).......58 DELRAY, YEOMAN, BISCAYNE,
BROOKWOOD, CORVETTE.....58-59 Ser. 3A w/4WD (exc. locking hub
equip.) .......................59-60 ' 2 TON (4 'WD w/locking hub) .....59 Ser. 3E-3G (4WD w/locking hub),60 Ser. 20 (4 'WD w /locking hub) .....59-62 CORVETTE (exc. 15 x 5'/2K wheel)59-62 CORVETTE w/15 x 5 1/2 K wheel,59-60 PASS . .........................61-62 PASS . .........................61-62 Ser. 10 (4/WD) (exc. 16x 5K wheel) .61-62 Ser. 10 (4 WD) (exc. 16 x 5K wheel)61-62 Ser. 10 (exc. 16 x 5K wheel) ......61-63 Ser. 10 (exc. chrome bumper, 4/WD,
6.50 x 16, 7-17.5, 7.00 x 15-6ply tires) .....................
61-63 Ser. 10 w/chrome bumper (exc.4 'WD, 16 x 5 wheels) ..........
61-63 Ser. 10 w;'6.00x 16, 6.50x 16, 7.00x 15, 7-17.5-6 ply tires ....... front and rear,
61-63 Ser. 10 (STEPSIDE) w/16 x 5K wheel carrier hub (red on white)wheel (exc. chrome bumper)..... (1023/32 O.D.) ..................... 3781650- A.R. 4.85
tNOTE: It may be necessary to paint in order to match.61-62 Ser. 10 (4%WD) w/6.50 x 16, 7-17.5-
6 ply tires .................... front wheels (white-10 22 O.D.)...... 3781649 2 4.75
61-62 Ser. 10 (STEPSIDE) w/chromebumper ...................... wheel carrier hub,
61-63 Ser. 10 w/chrome bumper, 16 x 5K front and rear (chrome w/red center)wheel(exc. 4 'WD) ............. (10232 O.D.) ..................... 3781675 A.R. 7.50
61-63 Ser. 20-30 w/chrome bumper (exc, wheel carrier hub, front and rear4 W D) ....................... (chrome w/red center) (10 2 3/37 O.D.) . 3781676 A.R. 8.25
61-63 Ser. 20-30 (exc. 4/WD w/locking wheel carrier hub, front and rear wheelshub) ......................... (red on white) (10/32 O.D.) ........ 3781651 A.R. 4.95
61-62 Ser. 20 (4 /WD) w/locking hub ..... front (red on white) (10 2 3/3 , O.D.) ...... 3781652 2 4.9563 PASS .......................... front and rear (10"/ 6 O.D.)........... 3821120 4 4.4864 PASS.,64 SUPER SPORT w/chrome wheel. front and rear ...................... 3840978 4 4.7564-66 Ser. 10, G-10 w/chrome bumper
(axe. 16 x 5K wheel, 4/WD)..... front and rear, wheel carrier......... 3875624 A.R. 5.5064-66 Ser. 20-30 (exc. chrome bumper,
4 WD, 18 x 5 wheel) ........... front and rear, wheel carrier ......... 3875621A A.R. 4.1064-65 Ser. 20-30 w;'chrome bumper
(exc. 4/WD) .................. front and rear, wheel carrier ......... 3875622 A.R. 7.2564-66 Ser. 10 w 'chrome bumper, 14 or 15
inch clipless wheel (exc. 4/WD). front and rear, wheel carrier wiclips .. 3875623A A.R. 7.2564-65 Ser. 10 w/7.00 x 15-6 ply, 7-17,
5-6 ply (axe. 4/WD)............ front and rear,64-66 Ser. 10 (STEPSIDE) w/16 x 5K
wheel (1st design) (axe. chromebumper) ...................... wheel carrier...................... 3875625A A.R. 4.10
64-66 G-10 (7.00 x 13-8 Ply) (axe.chrome bumper, custom equip.) . front and rear (923/32 O.L.)............ 3875629 A.R. 3.30
64-66 G-10 w/chrome bumper, customequip., 13" wheels ............ front and rear ..................... 3875630A 4 4.75
64-66 G-10 (1st design) (axe. chromebumper, custom equip. 14" wheel) front and rear (white) (9 2 Y,, O.L.) ..... 3875631 4 3.10
-1 967Chevrolet Motor Division 5.858General Motors Corporation 923
64-65 Ser. 10, 010 (exc. chrome bumper,4/ WD) ....................... front and rear, wheel carrier,
66 Ser. 10 w/700 x 15, 700 x 17.5(exc. 4/WD) .................. front and rear,
66 Ser. 10 (STEPSIDE) w/16 x 5Kwheel(2nd design) ............ wheel carrier ...................... 3875620A A.R. 3.10
65 PASS . ......................... front and rear, w/painted emblem ..... 3871108 A.R. 4.2566 PASS .......................... front and rear...................... 3875027 4 4.4867 PASS. (exc. S.S., CAPRICE,
discbrakes) .................. .................................... 3893336 4 4.6567 Ser. 10, G-10-20 w/chrome bumper
(exc. D-D,4/WD) .............. .................................... 3894203 A.R. 6.9567 Ser. 10 (w/chrome bumper 7 x 17.5) wheel carrier ...................... 3894207 A.R. 7.5067 PASS., CORVETTE w/disc brakes
(exc. aluminum, POLICE) ...... (2-piece) .......................... 3901712 4 3.7567 POLICE w'15" wheel ............ .................................... 3908672 A.R. 4.9567 Ser. 20-30 (exc. 4/WD, chrome
bumpe r) ...................... front and rear,67 Ser. 20-30 (CONY.) (STEPSIDE)
(exc. chrome bumper) .......... wheel carrier (16 x 5) ............... 3894209 A.R. 4.5067 Ser. 20-30 (CONY.) (STEPSIDE)
(w/chrome bumper)............ wheel carrier,67 Ser. 20-30 (CONY.) (w/chrome
bumper) ...................... front and rear...................... 3894210 A.R. 7.5067 Ser. 10, G-10-20 (exc. 4/WD) ...... front and rear,67 Ser. 10 (STEPSIDE) (exc. D-D,
4 /WD, 7 x 17.5) ............... wheel carrier ...................... 3894201 A.R. 3.5067 Ser. 10 (exc. 4/WD, chrome
bumper) ...................... front and rear67 Ser. 10 (STEPSIDE) w/7 x 17.5
4/WD, chrome bumper) ......... wheel carrier ...................... 3894206 A.R. 4.5068 PASS. (exc. CAPRICE, disc brake) .................................... 3916402 4 4.9568 CORVETTE,68 PASS. «'/disc brake, spec. wheel .. .................................... 3925802 468 Ser. 10 (CONY.) w/chrome (exc.
7.00 x 17.5) .................. .................................... 3930245 A.R.68 Ser. 10 (CONY.) (exc. chrome, 7.00
x17.5) ....................... .................................... 3930244 A.R.68 Ser. 10 (CONY.) w/chrome, 7.00
x17.5 ....................... .................................... 3930248 A.R.68 Ser. 10 (CONY.) w/7.00 x 17.5
(exc. chrome) ................. .................................... 3930247 A.R.68 Ser. 20-30 (CONY.) (exc. chrome) .. .................................... 3930250 A.R.68 Ser. 20-30 (CONY.) w/chrome ..... .................................... 3930251 A.R.
A.NOTE: Embolished circle and lower center section around emblem.
COVER-COVER UNIT (Full Wheel)
53 PASS . ......................... (st. steel) (15 1/8 O.D.) ............... 3698231 4 9.2554 PASS . ......................... (st. steel) (15'/8 O.D.) ............... 3708308 4 9.9555 PASS.,55 Ser. 3 (2nd Ser.) ................. .................................... 3715378 4 9.9556 PASS., '/z TON,60-61 Ser. 10 (exc. 4/WD) .............. (st. steel-15'/32 O.D.) ............... 3722302 4 9.5056 PASS. w/wire wheel ............. .................................... 3728997 4 15.1057 PASS . ......................... (st. steel) ......................... 3732696 4 9.2558 PASS . ......................... .................................... 3744076 4 9.1559 PASS . ......................... (st. steel)......................... 3760050 4 9.2560 PASS . ......................... (crossed flags-8 fins) (chrome) ...... 3769530 4 9.0061 PASS. (exc. SUPER SPORT) ...... .................................... 3783336 4 9.1561 IMPALA (SUPER SPORT) ........ .................................... 3803938 4 10.2562-63 PASS. w/wire wheels ............ .................................... 3826516 4 14.3062 IMPALA (S.S.) (exc. wire wheels) . .................................... 3816540 4 10.2562 PASS. (exc. S.S., wire wheels) .... .................................... 3819934 4 9.4063 IMPALA (S.S.) (exc. wire, chrome
wheels) ...................... .................................... 3827419* 4 12.45*NOTE: Cover is a complete assembly.
63 PASS. (exc. S.S., wire, chromewheels) ...................... .................................... 3821121 4 9.15
63 CORVETTE (1st design) (exc.Sp. Per.) ..................... (aluminum) ....................... 3830638k 4 15.25
+NOTE: Includes 6 ribs, ornament, reinforcement and 15 screws.
5.858 ©-1967Chevrolet Motor Division
924 General Motors Corporation
63 CORVETTE (2nd design) (exc.Sp./Per.) ..................... (chrome) .......................... 3843538 4 16.25
64 PASS. (S.S.) (exc. wire, chromewheels) ...................... .................................... 3849435 4 12.85
64 CORVETTE (1st design) ......... (chrome) .......................... 3849557 4 15.2564 CORVETTE (2nd design)......... (silver) ........................... 3862137 4 13.8064 PASS. (exc. S.S., wire, chrome
wheels) ...................... .................................... 3840980 4 6.0564-66 PASS., G-10 w/wire wheels....... w/ornament ........................ 3834904 4 25.3565 PASS., G-10 (exc. S.S., CAPRICE,
wire, mag. wheels) ............ .................................... 3860204 4 9.3065 CORVETTE .................... .................................... 3865938 4 13.8065-66 PASS. w;mag. wheels ............ .................................... 3872861 4 21.8065 S.S., CAPRICE (exc. wire, mag.
wheels),66 S.S. (exc. wire, mag. wheels) ..... .................................... 3893599 4 14.6566 PASS., G-10 (exc. S.S., CAPRICE,
wire, mag. wheels) ............ .................................... 3875029 4 9.3066 CAPRICE (exc. wire, mag.
wheels) ...................... .................................... 3875033 4 11.1066 CORVETTE .................... w/ornament ........................ 3888813 4 13.8067 S.S. (exc. wire, mag. wheels,
discbrakes) .................. .................................... 3893358 4 8.7567-68 Ser. 10, G-20 w/wheel carrier
(exc. 4/WD) .................. .................................... 3893006 4 7.9567-68 PASS. w/14" wire wheels ........ .................................... 3903059 4 25.3567 PASS. w/14" wheels (exc. S.S.,
CAPRICE) ................... .................................... 3893361 4 8.5067-68 PASS. w/14" mag. wheels ........ .................................... 3903086 4 21.8067-68 G-10 ........................... .................................... 3895218 4 7.9567 CORVETTE w/15 x 6L aluminum
wheel ........................ .................................... 3910731 4 17.2567 CAPRICE (exc. disc brakes, mag.
wirewheels) .................. .................................... 3893350 4 8.7567-68 PASS. w/disc brakes ............ wheel trim (15 x 5J) ................ 3901704 468 PASS. (exc. CAPRICE, S.S.) w/14"
wheel ........................ .................................... 3916408 4 8.9568 CAPRICE (exc. sim. wire, mag.
discbrake) ................... .................................... 3916415 4 9.2568 PASS. w/sim. mag. wheels ....... .................................... 3918080 4 22.2568 PASS. w/14" sim. wheels ........ outer ............................. 3924476 468 CORVETTE .................... .................................... 3923630 468 Ser. 10 w/chrome ................ .................................... 3933254 A.R.68 CAPRICE, S.S. (exc. 427) ........ .................................... 3930774 465-66 PASS. w/mag. wheels............ COVER UNIT ........................ 986417# 1 N.L.65-66 G-10 w/13" wheels .............. COVER UNIT........................ 986123# 1 N.L.67 Ser. 10, G-20 w/15" wheels
(exc. 4/WD),68 Ser. 10 (D-D), G-20 .............. COVER UNIT........................ 987095# 1 N.L.67 PASS. w/14" wheels (exc. S.S.,
CAPRICE) ................... COVER UNIT ....................... 986829 1 N.L.67-68 PASS. w/14" mag. wheels ........ COVER UNIT ........................ 987067# 1 N.L.67-68 PASS. w/14" wire wheels ........ COVER UNIT ........................ 987042# 1 N.L.67-68 G-10 w/14" wheels .............. COVER UNIT........................ 9868414 1 N.L.68 PASS. (exc. CAPRICE) w/14"
wheel........................ COVER UNIT........................ 987199 168 PASS. w/14" mag. wheel ......... COVER UNIT ........................ 987245 168 Ser. 10 (CONV.) ................. COVER UNIT........................ 987478 1
=NOTE: Consists of four covers (full wheel).
5.864 SPRING—CL IP—CLIP ASSY.—BUMPER, Wheel Hub Cap Lock
38-42 COMM. (exc. KE, KF, AM, AN,BM, BN),
46-65 ' L2 TON,62 % TON ........................ (15-17.5 in. wheel) ................. 594129 30 .0538-39 PASS., COMM. (exc. JA, JB, JC, JD) (with 16 in. wheel),41-68 , 1 TON (exc. AL, BL) ......... (with 17, 17.5, 18 and 19.5 in wheel). 595648 A.R. .0539-53 PASS. (exc. C) ................. (w/15 in. wheels),39-63 '2 TON ........................ (w/16 in. wheels).................. 3704844 A.R. .0556 PASS .......................... CLIP, wire wheel trim ring ............ 3728998 30 .29
c-196Chevrolet Motor Division 5.858-5.864General Motors Corporation 925
67 CORVETTE w/15 x 6L aluminumwheel ........................ CLIP, wheel trim ..................... 3910733 A.R. 25
55-56 PASS., '.z TON,57-60 ' 2 TON ........................ CLIP ASSY., wheel trim ring .......... 3741878 A.R. 3356 PASS .......................... BUMPER, wire wheel trim ring ......... 3720623 30 05
5.866 GASKET, Wheel Hub Cap
39-40 COE,41-42 UTILITY w/H.D.,46-55 SBC, 2 TON (1st Ser.),48-55 1'2 TON w/H.D. (1st Ser.) ........ front wheel (3
1/e I.D. x 4Yz O.D.) ...... 3650732 2 05
47-53 UTILITY,54-55 1 TON (1st Ser.) (exc. 2-SPD.),67 Ser. 30 w /11000 lb. axle ......... rear wheel (3 "/3z I.D. x 311/ .... 3685199 2 .25
5.871 RING-EMBLEM-INSERT-ORNAMENT-ORNAMENT ASSY.-HUB ASSY.-RETAINER-WASHER-REINFORCEMENT-RIB-SCREW-NUT ASSY.-SPOKE ASSY.-INSULATOR-SPACER-RING ASSY., Wheel Cover Appearance
56 PASS.,56-59 ' 2 TON,60 Ser. 10-20 (exc. D-D, 4/WD) , , , , , , wheel trim (w/15 x 5 wheels) ........ 372355654 PASS.,57-60 PASS . ......................... EMBLEM, hub cap (part of 3750384) .... 370831061 PASS. (exc. S.S.) ................ EMBLEM (crossed flags-black plastic) . 378333962 PASS. (exc. S.S.) ................ EMBLEM (blue plastic) ............... 378992663 PASS. (exc. S.S.) ................ EMBLEM ............................ 382112364 PASS. (exc. S.S.) ................ EMBLEM ............................ 384312064-66 CORVETTE w/knock off wheels .. EMBLEM, wheel lock nut .............. 385382565-66 S.S . ........................... EMBLEM ............................ 386021765 G-10 w 1 13" wheels .............. EMBLEM ............................ 384030665 PASS. (exc. S.S.),65 G-10
w/14 wheels .............. EMBLEM ............................ 3860206
66 PASS., G-10 (exc. S.S., CAPRICE) EMBLEM ............................ 387503165 CAPRICE (exc. simulated wire whl.) INSERT ............................. 387696867 PASS. (exc. S.S., CAPRICE) ...... INSERT, trim cover ................... 389336267 S.S. (exc. wire, mag. disc brakes).. INSERT, wheel cover ................. 389335967 CAPRICE (exc. disc brakes, mag.
wire wheels) .................. INSERT ............................. 389335556-62 CORVETTE .................... ORNAMENT (knock-off) ............... 372523961 S.S . .......................... ORNAMENT (knock-off) ............... 378767962 S.S . ........................... ORNAMENT (knock-off) ............... 381510162-63 PASS. w wire wheel covers ....... ORNAMENT ......................... 381475763 S.S . ........................... ORNAMENT ......................... 382739463 CORVETTE (exc. knock-off wheels) ORNAMENT ......................... 382546964 S.S. (exc. wire wheel cover) ...... ORNAMENT ......................... 384097464 CORVETTE (exc. knock-off wheels) ORNAMENT ......................... 384338764-66 PASS . ......................... ORNAMENT, wire wheel cover spinner , , 385964765-66 CAPRICE, S.S. (exc. wire wheel
cover) ....................... ORNAMENT ......................... 386021565 CORVETTE (exc. knock-off wheels) ORNAMENT ......................... 386423066 CORVETTE (exc. knock-off wheels) ORNAMENT ......................... 387654467 PASS., CORVETTE w/disc brakes
(exc. aluminum),68 PASS . ......................... ORNAMENT, hub cap ................. 390171567 CORVETTE w/15 x 6L aluminum
wheel........................ ORNAMENT ......................... 390816167 PASS. w/wire wheels ............ ORNAMENT ......................... 390876259-60 PASS. w/deluxe equip............ ORNAMENT ASSY., hub cap
4 6.20
4 1.134 .924 .924 .894 1.211 8.954 .584 1.69
4 1.90A.R. 1.90
4 .584 1.754 1.75
1 1.754 5.804 3.344 3.344 2.354 2.004 3.344 3.544 3.404 2.27
4 3.704 4.354 4.27
4 1.75
4 3.254
58-60 PASS. (production) ..............
63 S.S............................67-68 Ser. 10 (CONV.) (exc. PICK-UP),67-68 Ser. 10 (STEPSIDE) w/wheel
carrier.......................68 CORVETTE (exc. wheel trim cover),68 PASS., w 'disc brake, spec. wheel .64 S.S. (exc. wire wheel)............
5.864-5.871
(2 lug knock-off) ...................ORNAMENT ASSY., hub cap
(3 lug knock-off) ...................ORNAMENT ASSY., wheel cover, w/hub.
ORNAMENTASSY . .................. .
ORNAMENTASSY ................... .HUB ASSY., wheel cover ..............
926
3756545 4 4.60
3750384 4 3.503827393 4 6.80
3913125 A.R. 1.75
3925805 43841192 4 3.30
C-1967Chevrolet Motor Division
General Motors Corporation
68 CORVETTE .................... HUB, wheel cover .................... 3923631 457 PASS .......................... RETAINER, hub cap ornament ......... 3736339 4 .5859-60 PASS .......................... RETAINER, hub cap ornament
(use w/3756545) ................... 3756544 4 .4258-60 PASS .......................... RETAINER, hub cap ornament
(use w/3750384) ................... 3750386 4 .2467 CORVETTE w/15 x 6L aluminum
wheel ........................ RETAINER .......................... 3910734 5 2.2556-62 CORVETTE .................... WASHER, wheel cover reinforcement
(stainless steel) ................... 3726529 4 .7561 S.S . ........................... REINFORCEMENT .................. 3796671 4 .3762-63 S.S . ........................... REINFORCEMENT ................... 3820017 8 .1863 CORVETTE (exc. knock-off wheels) REINFORCEMENT ................... 3825470 4 .1864 S.S . ........................... REINFORCEMENT ................... 3840976 4 .1864 CORVETTE .................... REINFORCEMENT ................... 3843391 4 .1565-66 CAPRICE, S.S. (exc. wire wheel
cover) ....................... REINFORCEMENT ................... 3860216 4 .1966 CORVETTE (exc. knock-off wheels) REINFORCEMENT ................... 3876547 4 .2063 CORVETTE (exc. knock-off wheels) RIB ................................ 3825471 24 .9762-63 PASS.,65-66 PASS.,67 PASS., CORVETTE w/disc brakes
(exc, aluminum), SCREW, wire wheel cover ornament68 PASS. w/mag. wheel ............. (8-18 x °/ 6 ) (hex. hd.-spherical face). . 3824195 16 .0564 S.S. (exc. wire wheel cover) ...... SCREW, wheel trim cover hub ( 5/, x 18).. 9420686 12 (8.977)65-67 PASS. w/simulated wire wheel. , .. SCREW, trim spinner ornament (8-18 x
'/s) ................................ 385958 16 .0468 CORVETTE .................... SCREW, wheel cover ornament, wheel
coverhub ......................... 9416704 48 .0963 CORVETTE .................... NUT ASSY., left (w/knock-off wheels) .. 3819543 2 (5.813)63 CORVETTE .................... NUT ASSY., right (w/knock-off wheels) , 3819544 2 (5.813)64-66 CORVETTE .................... NUT ASSY., left (w/knock-off wheels) ,, 3853795 2 (5.813)64-66 CORVETTE .................... NUT ASSY., right (w/knock-off wheels) . 3853796 2 (5.813)65-67 PASS. w/14" wire wheels........ SPOKE ASSY., inner .................. 3874683 A.R. .4465-66 PASS. w/14' 1 wire wheels ........ SPOKE ASSY., outer .................. 3874686 A.R. .4967-68 PASS. w/14" wire wheels ........ SPOKE ASSY., outer .................. 3905786 A.R. .4565-66 PASS. w/simulated wire wheels... INSULATOR (1 3/4 x 3
3/-
9/3 , thk.) ........ 3782302 A.R.(3.704)
66-67 CORVETTE (exc. knock-off whls.) SPACER, wheel cover ornament ........ 3876548 A.R. .9567-68 PASS. (w /disc brakes, 15 x 5J) . .. RING ASSY., wheel trim ............... 3901704 4 8.7567 PASS. (STA. WAG.) w/disc brakes,67-68 PASS., w(15 x 6J wheel (exc. STA.
WAG., CAPRICE),67 CORVETTE w/15 x 6JK wheel.... RING ASSY., wheel trim ............... 3901708 4 8.7568 PASS . ......................... RING ASSY., wheel trim ............... 3918081 468 CORVETTE .................... RING ASSY., wheel trim............... 3923626 4
5.875 STEM ASSY.-EXTENSION-WASHER-NUT-CAP, Tire Valve
55-56 PASS., CORVETTE, /2 TON,57-62 CORVETTE, '4 TON ............. tubeless tire, snap in type (1'/8 O.L.).. 273232 5 .7757 PASS .......................... tubeless tire, snap in type (2 27/64
O.L.) 274119 5 .9258-59 BEL AIR, IMPALA, NORMAD. , , . , tubeless tire, snap in type (2 5 % 4 O.L.) 274561 5 1.06ALL ALL ........................... tubeless tire, snap in type (1'/4 O.L.), , 274083 5 .7757-61 PASS.,62-63 PASS. w/14" wheel .............. EXTENSION, tubeless tire valve stem .. 9417466 A.R. .5062 PASS.,64-67 PASS., (exc. S.S.) ............... EXTENSION, tubeless tire valve stem67 Ser. 10 (exc. 4/WD) ............. (142 O.L.) ......................... 9417730 4 .5063-68 PASS. (exc. wire wheel covers),65 S.S . ........................... EXTENSION, tubeless tire valve stem66-67 G-10 ........................... ('/8 O.L.) .......................... 9417745 4 .5067-68 PASS.,67-68 G-20, Ser. 10 (exc. 4/WD) ........ EXTENSION, valve stem .............. 9422212 4 .4456-59 Ser. 3 .......................... WASHER, tubeless tire stem (brass)
( 13/32 I.D. x 3/a O.D. X'6 6 thk.w/rolled edges) .................... 273608 A.R. .15
56-59 Ser. 3 .......................... NUT, tubeless tire stem (brass) ("/32 -28) 273609 A.R. .15ALL ALL, CORVETTE ............... CAP (type "F"- 3/8 O.D. x 37/64 long) ..... 3171598 5 .15
-1967Chevrolet Motor Division 5.871-5.875
General Motors Corporation 927