Certificate of Product ConformityBVI.DOA.19.IND.169.49.CPC.02 Rev.01*

Job Description : Conformity assessment of a product

Product Name : Plastics Piping Systems for water supply, and for drainageand Sewerage under pressure – Polyethylene (PE)

Product range : From 20 - 800mmManufacturer : Hepworth PME (Qatar) W.L.L.Date of Inspection : 26/07/2020

Scope of work:1. Review Quality Plan2. Review QA/QC Procedures3. Review Personnel Competency4. Carry out a site visit during production5. Review test equipment & calibration record

Documents Referenced:1. ISO 4427-2-20192. QCS 2014 – Section 8 Part 3

Result of Inspection: The product of Polyethylene (PE) Pipes for water supply, drainage andsewerage under pressure range from 20 – 800mm, manufactured and tested by Hepworth PME(Qatar) WLL have been evaluated and found in conformity against the requirements of thestandard ISO 4427 Part 2 2019 and QCS 2014 – Section 8 Part 3.

This note is issued further to an inspection whose duration and scope were limited by the termsand conditions of the contract with BV principal. This note is NOT an indication that the item(s)is (are) fit for any specific purpose and does not release the manufacturer, supplier and anyparty from their respective duty, guarantee, obligation and/or indemnity relating to, withoutlimitation, patents, workmanship, materials, safety, performance in operation and /or reliability.* Document revised to amend the product title as per the standard ISO 4427 Part 2 2019. *

This Certificate is valid for 1 Year from the date of issue.

Survey Carried out by : Yogesh SahibCertificate issued by : Sherif RamadanDate of issue : 05/08/2020Certificate Number : 002/2020 Rev.01*Inspection Center : Doha, Qatar

Certificate of Product ConformityBVI.DOA.19.IND.169.49.CPC.14 Rev.01*

Job Description : Conformity assessment of a product

Product Name : Plastics Piping Systems For Water Supply and For Drainage andSewerage Under Pressure-Polyethylene (PE)– Annex B FabricatedFittings.

Product range : From 20 - 800mm

Manufacturer : Hepworth PME (Qatar) W.L.L.

Date of Inspection : 26/07/2020

Scope of work:1. Review Quality Plan.2. Review QA/QC Procedures.3. Review Personnel Competency4. Carry out a site visit during production.5. Review test equipment & calibration record.

Documents Referenced:1. ISO 4427-3:2019

Result of Inspection: The product of Polyethylene (PE) Fabricated Fittings for water supply,drainage and sewerage under pressure range from 20 – 800mm, manufactured and tested byHepworth PME (Qatar) WLL have been evaluated and found in conformity against therequirements of the standard ISO 4427-3:2019

This note is issued further to an inspection whose duration and scope were limited by the termsand conditions of the contract with BV principal. This note is NOT an indication that the item(s)is (are) fit for any specific purpose and does not release the manufacturer, supplier and anyparty from their respective duty, guarantee, obligation and/or indemnity relating to, withoutlimitation, patents, workmanship, materials, safety, performance in operation and /or reliability.* Document revised to amend the product title as per the standard ISO 4427 Part 3 2019. *

This Certificate is valid for 1 Year from the date of issue.

Survey Carried out by : Yogesh SahibCertificate issued by : Sherif RamadanDate of issue : 05/08/2020Certificate Number : 014/2020 Rev.01*Inspection Center : Doha, Qatar