Bid Document - Bharat Heavy Electricals Limited

Bid Details

Bid End Date/Time 28-05-2021 14:00:00

Bid Opening Date/Time 28-05-2021 14:30:00

Bid Life Cycle (From Publish Date) 90 (Days)

Bid Offer Validity (From End Date) 60 (Days)

Ministry/State Name Ministry Of Heavy Industries And Public Enterprises

Department Name Department Of Heavy Industry

Organisation Name Bharat Heavy Electricals Limited (bhel)

Office Name 10140027-hpbp Trichy

Total Quantity 213

Item Category

UNIVERSAL BEVEL PROTRACTOR BLADE LENGTH 300MMGRADUATION 5'(0-90-0) - MITUTOYO CODE 187-908 OREQUIV , VERNIER DEPTH GAUGE RANGE 0-150MM- VERNIERREADING= 0.02-ACCURACY+ /-0.03MM-BASE DIMENSIONS100 X6.5 , VERNIER DEPTH GAUGE RANGE 0-300MM-VERNIER READING= 0.02-ACCURACY+ /-0.04MM-WITH FINEADJUSTMENT-MITU , VERNIER HEIGHT GAUGE RANGE 0 -600 MM, VERNIER READING-0.02MMACCURACY+ /- 0.05MMMITUTOYO CODE NO. 5 , OUTSIDE MICROMETER WITHCARBIDE TIPPED FACES-RATCHET STOP - RANGE 0-25 MMGRADUATION 0.01 ACCURACY 0 , OUTSIDE MICROMETERSRANGE 25-50 GRADUATION 0.01MM ACCURACY 0.02MMCARBIDE TIPPED FACES MITUTOYO CODE , OUTSIDEMICROMETER WITH CARBIDE TIPPED FACES, WITH RATCHETSTOP, RANGE 150-300mm GRADUATION 0.01mm W ,OUTSIDE MICROMETER RANGE 300-400MM RESOLUTION0.01 mm WITH INTER CHANGEABLE ANVILS 0, 25, 50,75mm M , OUTSIDE MICROMETER RANGE 400-500MMRESOLUTION 0.01 mm WITH INTERCHANGEABLE ANVILS 0,25, 50, 75mm MI , OUTSIDE MICROMETER RANGE 500-600MM RESOLUTION 0.01 mm WITH INTER CHANGEABLEANVILS 0, 25, 50, 75mm M , OUTSIDE MICROMETER WITHINTER CHANGEABLE ANVILS RANGE 600- 700MM-GRADOATION 0.01MM MITUTOYO CODE104- , OUTSIDEMICROMETER WITH INTER CHANGEABLE ANVILS RANGE700- 800MM-GRADUATION 0.01MM MITUTOYO CODE104- ,OUT SIDE MICROMETER WITH CARBIDE TIPPED FACES, WITHRATCHET STOP, RANGE 800-900MM, GRADUATION 0.01MM ,OUT SIDE MICROMETER WITH CARBIDE TIPPED FACES, WITHRATCHET STOP, RANGE 900-1000MM, GRADUATION 0.01M ,OUT SIDE MICROMETER WITH CARBIDE TIPPED FACES, WITHRATCHET STOP, RANGE 1000-1100MM, GRADUATION 0.01 ,OUT SIDE MICROMETER WITH CARBIDE TIPPED FACES, WITHRATCHET STOP, RANGE 1100-1200MM, GRADUATION 0.01 ,EXTENTION PIPE TYPE TUBULAR MICROMETER RANGE 50-1500 MM GRADUATION 0.01 MM WITH EXTENSION PIPES13, , EXTENTION PIPE TYPE TUBULAR MICROMETER RANGE100-2100 mm GRADUATION 0.01 mm WITH EXTENSIONPIPES 25, , VERNIER CALIPER WITH FINE ADJUSTMENT

Bid Number: GEM/2021/B/1222745Dated: 18-05-2021

Bid Document

1 / 22

PIPES 25, , VERNIER CALIPER WITH FINE ADJUSTMENTRANGE 0-600mm. LEAST COUNT 0.02mm-ACCURACY+ /-0.05mm. MITUTOYO , UNIVERSAL MAGNETIC DIAL STANDWITH CENTRAL LOCKING SYSTEM AND ARTICULATED ARMNOGA CODE MG 10503/MIT , 100X95X70mm. MAGNETIC 'V'BLOCK HARDENED WITH 3- MAGNETIC SURFACE. CLAMPINGDIA 5-65MM. ACCURACIES F , FEELER GAUGE 150MM (LONGLEAF) RANGE 0.05-1.0MM SIZE-13 BLADES AS PER IS3179/1990-MITUTOYO BRAND 18 , CONCAVE AND CONVEXMETRIC RADIUS GAUGE RANGE 0.5-13 MM IN INCREMENTSOF 0.5MM (26 PAIRS) 90 DEGREE A , SPIRIT LEVEL-SIZE:150/180MM LONG-ACCURACY 0.02MM PER METRE. ,MITUTOYO MAKE BORE GAUGE WITH STANDARD DIALINDICATOR, RANGE: 18- 35MM WITH INDICATOR L. C.0.01MM, , BORE DIAL WITH STANDARD DIAL INDICATORRANGE 35-60MM GRADUATION 0.01MM-MITUTOYO CODE:511-712 OR EQU , BORE GAGE WITH STANDARD DIALINDICATOR RANGE 50-150mm- GRADUATION 0.01-PROBEDEPTH 150mm-MITUTOYO CO , VERNIER HEIGHT GAUGERANGE: 0-300MM LEAST COUNT 0.02MM-ACCURACY+ /-0.04MM MITUTOYO CODE 514-102 OR E , VERNIER HEIGHTGAUGE RANGE: 0-1000MM LEAST COUNT0.02MMACCURACY+ /-0.07MM MITUTOYO CODE 514-108 ORE , DIGIMATIC CALIPERS RANGE 0-150MM ACCURACY+ /-0.02MM LEAST COUNT 0.01MM MITUTOYO CODE: 500-151-30 / S , DIGIMATIC CALIPERS RANGE 0-300mm. RESOLUTION0.01MM-ACCURACY 0.03MM-MITUTOYO CODE: 500-153/STARRETT , " DIAL INDICATOR WITH LUGGED BACKRANGE 0-10mm GRADUATION 0.01 DIAL READING 0-100ACCURACY 0.013 RAN

Minimum Average Annual Turnover of theBidder 15 Lakh (s)

MSE Exemption for Years of Experience andTurnover No

Startup Exemption for Years Of Experience Yes

Document required from seller

Bidder Turnover,Certificate (Requested in ATC),AdditionalDoc 1 (Requested in ATC)*In case any bidder is seeking exemption from Experience /Turnover Criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyer

Bid to RA enabled Yes

Primary product category UNIVERSAL BEVEL PROTRACTOR BLADE LENGTH 300MMGRADUATION 5

Time allowed for Technical Clarificationsduring technical evaluation 2 Days

Estimated Bid Value 3163050

Evaluation Method Item wise evaluation

Bid Details

EMD Detail

Required No

ePBG Detail

2 / 22

Required No

(a). The EMD % will be applicable for each schedule/group selected during Bid creation.

Splitting

Bid splitting not applied.

MII Purchase Preference

MII Purchase Preference Yes

MSE Purchase Preference

MSE Purchase Preference Yes

1. If the bidder is a Startup, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and"Experience Criteria". If the bidder is OEM of the offered products, it would also be exempted from the "OEMAverage Turnover" criteria. In case any bidder is seeking exemption from Turnover / Experience Criteria, thesupporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer. 2. The minimum average annual financial turnover of the bidder during the last three years, ending on 31stMarch of the previous financial year, should be as indicated above in the bid document. Documentary evidence inthe form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant /Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case thedate of constitution / incorporation of the bidder is less than 3-year-old, the average turnover in respect of thecompleted financial years after the date of constitution shall be taken into account for this criteria. 3. Preference to Make In India products (For bids < 200 Crore):Preference shall be given to Class 1 local supplieras defined in public procurement (Preference to Make in India), Order 2017 as amended from time to time and itssubsequent Orders/Notifications issued by concerned Nodal Ministry for specific Goods/Products. The minimumlocal content to qualify as a Class 1 local supplier is denoted in the bid document. If the bidder wants to avail thePurchase preference, the bidder must upload a certificate from the OEM regarding the percentage of the localcontent and the details of locations at which the local value addition is made along with their bid, failing whichno purchase preference shall be granted. In case the bid value is more than Rs 10 Crore, the declaration relatingto percentage of local content shall be certified by the statutory auditor or cost auditor, if the OEM is a companyand by a practicing cost accountant or a chartered accountant for OEMs other than companies as per the PublicProcurement (preference to Make-in -India) order 2017 dated 04.06.2020. Only Class-I and Class-II Local suppliersas per MII order dated 4.6.2020 will be eligible to bid. Non - Local suppliers as per MII order dated 04.06.2020 arenot eligible to participate. However, eligible micro and small enterprises will be allowed to participate .In caseBuyer has selected Purchase preference to Micro and Small Enterprises clause in the bid, the same will getprecedence over this clause. 4. Purchase preference to Micro and Small Enterprises (MSEs): Purchase preference will be given to MSEs asdefined in Public Procurement Policy for Micro and Small Enterprises (MSEs) Order, 2012 dated 23.03.2012 issuedby Ministry of Micro, Small and Medium Enterprises and its subsequent Orders/Notifications issued by concernedMinistry. If the bidder wants to avail the Purchase preference, the bidder must be the manufacturer of the offeredproduct in case of bid for supply of goods. Traders are excluded from the purview of Public Procurement Policy forMicro and Small Enterprises. In respect of bid for Services, the bidder must be the Service provider of the offeredService. Relevant documentary evidence in this regard shall be uploaded along with the bid in respect of theoffered product or service. If L-1 is not an MSE and MSE Seller (s) has/have quoted price within L-1+ 15%(Selected by Buyer)of margin of purchase preference /price band defined in relevant policy, such Seller shall begiven opportunity to match L-1 price and contract will be awarded for 25%(selected by Buyer) percentage oftotal QUANTITY. 5. Estimated Bid Value indicated above is being declared solely for the purpose of guidance on EMD amount andfor determining the Eligibility Criteria related to Turn Over, Past Performance and Project / Past Experience etc.This has no relevance or bearing on the price to be quoted by the bidders and is also not going to have any

3 / 22

impact on bid participation. Also this is not going to be used as a criteria in determining reasonableness ofquoted prices which would be determined by the buyer based on its own assessment of reasonableness andbased on competitive prices received in Bid / RA process.

Evaluation Method ( Item Wise Evaluation Method )

Contract will be awarded schedulewise and the determination of L1 will be done separately for each schedule.The details of item-consignee combination covered under each schedule are as under:

EvaluationSchedules

EstimatedValue Item/Category Quan

tity

Schedule 1 106200 Universal Bevel Protractor Blade Length 300mm Graduation 5'(0-90-0) -Mitutoyo Code 187-908 Or Equiv 10

Schedule 2 43326 Vernier Depth Gauge Range 0-150mm- Vernier Reading= 0.02-accuracy+ /-0.03mm-base Dimensions 100 X6.5 9

Schedule 3 66267 Vernier Depth Gauge Range 0-300mm-vernier Reading= 0.02-accuracy+ /-0.04mm-with Fine Adjustment-mitu 9

Schedule 4 193520 Vernier Height Gauge Range 0 - 600 Mm, Vernier Reading-0.02mmaccuracy+ /- 0.05mm Mitutoyo Code No. 5 5

Schedule 5 20768 Outside Micrometer With Carbide Tipped Faces-ratchet Stop - Range 0-25 Mm Graduation 0.01 Accuracy 0 8

Schedule 6 12980 Outside Micrometers Range 25-50 Graduation 0.01mm Accuracy0.02mm Carbide Tipped Faces Mitutoyo Code 5

Schedule 7 86140 Outside Micrometer With Carbide Tipped Faces, With Ratchet Stop,Range 150-300mm Graduation 0.01mm W 5

Schedule 8 55932 Outside Micrometer Range 300-400mm Resolution 0.01 Mm With InterChangeable Anvils 0, 25, 50, 75mm M 3

Schedule 9 61596 Outside Micrometer Range 400-500mm Resolution 0.01 Mm WithInterchangeable Anvils 0, 25, 50, 75mm Mi 3

Schedule 10 78588 Outside Micrometer Range 500-600mm Resolution 0.01 Mm With InterChangeable Anvils 0, 25, 50, 75mm M 3

Schedule 11 57584 Outside Micrometer With Inter Changeable Anvils Range 600- 700mm-gradoation 0.01mm Mitutoyo Code104- 2

Schedule 12 68912 Outside Micrometer With Inter Changeable Anvils Range 700- 800mm-graduation 0.01mm Mitutoyo Code104- 2

Schedule 13 137352 Out Side Micrometer With Carbide Tipped Faces, With Ratchet Stop,Range 800-900mm, Graduation 0.01mm 2

Schedule 14 160856 Out Side Micrometer With Carbide Tipped Faces, With Ratchet Stop,Range 900-1000mm, Graduation 0.01m 2

Schedule 15 214854 Out Side Micrometer With Carbide Tipped Faces, With Ratchet Stop,Range 1000-1100mm, Graduation 0.01 2

Schedule 16 219008 Out Side Micrometer With Carbide Tipped Faces, With Ratchet Stop,Range 1100-1200mm, Graduation 0.01 2

Schedule 17 53100 Extention Pipe Type Tubular Micrometer Range 50-1500 Mm Graduation0.01 Mm With Extension Pipes 13, 3

Schedule 18 94305 Extention Pipe Type Tubular Micrometer Range 100-2100 MmGraduation 0.01 Mm With Extension Pipes 25, 3

4 / 22

Schedule 19 128856 Vernier Caliper With Fine Adjustment Range 0-600mm. Least Count0.02mm-accuracy+ /-0.05mm. Mitutoyo 7

Schedule 20 349895 Universal Magnetic Dial Stand With Central Locking System AndArticulated Arm Noga Code Mg 10503/mit 35

Schedule 21 80619 100x95x70mm. Magnetic 'v' Block Hardened With 3- Magnetic Surface.Clamping Dia 5-65mm. Accuracies F 7

Schedule 22 21945 Feeler Gauge 150mm (long Leaf) Range 0.05-1.0mm Size-13 Blades AsPer Is 3179/1990-mitutoyo Brand 18 15

Schedule 23 41958 Concave And Convex Metric Radius Gauge Range 0.5-13 Mm InIncrements Of 0.5mm (26 Pairs) 90 Degree A 7

Schedule 24 21666 Spirit Level-size: 150/180mm Long-accuracy 0.02mm Per Metre. 3

Schedule 25 35400 Mitutoyo Make Bore Gauge With Standard Dial Indicator, Range: 18-35mm With Indicator L. C. 0.01mm, 5

Schedule 26 21666 Bore Dial With Standard Dial Indicator Range 35-60mm Graduation0.01mm-mitutoyo Code: 511-712 Or Equ 3

Schedule 27 24072 Bore Gage With Standard Dial Indicator Range 50-150mm- Graduation0.01-probe Depth 150mm-mitutoyo Co 3

Schedule 28 77880 Vernier Height Gauge Range: 0-300mm Least Count 0.02mm-accuracy+/-0.04mm Mitutoyo Code 514-102 Or E 5

Schedule 29 436600 Vernier Height Gauge Range: 0-1000mm Least Count 0.02mmaccuracy+/-0.07mm Mitutoyo Code 514-108 Or E 5

Schedule 30 42905 Digimatic Calipers Range 0-150mm Accuracy+ /-0.02mm Least Count0.01mm Mitutoyo Code: 500-151-30 / S 5

Schedule 31 95200 Digimatic Calipers Range 0-300mm. Resolution 0.01mm-accuracy0.03mm-mitutoyo Code: 500-153/starrett 5

Schedule 32 53100 " Dial Indicator With Lugged Back Range 0-10mm Graduation 0.01 DialReading 0-100 Accuracy 0.013 Ran 30

UNIVERSAL BEVEL PROTRACTOR BLADE LENGTH 300MM GRADUATION 5'(0-90-0) -MITUTOYO CODE 187-908 OR EQUIV ( 10 pieces )

(Minimum 20% Local content required for MII compliance)

Brand Type Unbranded

Technical Specifications

Buyer Specification Document Download

Consignees/Reporting Officer and Quantity

S.No. Consignee/Reporting Officer Address Quantity Delivery Days

1 Anoop S S

620014,HIGH PRESSUREBOILER PLANT, BHARAT HEAVYELECTRICALS LIMITED,TIRUCHIRAPPALLI - 620014.TAMILNADU. INDIA.

10 90

5 / 22

https://mkp.gem.gov.in/catalog_data/catalog_support_document/buyer_documents/1265076/54/78/703/CatalogAttrs/SpecificationDocument/2021/5/15/tei0262_2021-05-15-10-00-20_f83ea2b190e67f876e1f1ade73560142.pdf

VERNIER DEPTH GAUGE RANGE 0-150MM- VERNIER READING= 0.02-ACCURACY+ /-0.03MM-BASE DIMENSIONS 100 X6.5 ( 9 pieces )







1 Anoop S S


9 90

VERNIER DEPTH GAUGE RANGE 0-300MM-VERNIER READING= 0.02-ACCURACY+ /-0.04MM-WITH FINE ADJUSTMENT-MITU ( 9 pieces )







1 Anoop S S


9 90

VERNIER HEIGHT GAUGE RANGE 0 - 600 MM, VERNIER READING-0.02MMACCURACY+ /-0.05MM MITUTOYO CODE NO. 5 ( 5 pieces )






6 / 22

https://mkp.gem.gov.in/catalog_data/catalog_support_document/buyer_documents/1265076/54/78/703/CatalogAttrs/SpecificationDocument/2021/5/15/tei0083_2021-05-15-10-11-03_cd08706f7cecf84a884b8d8e3af72f11.pdf

https://mkp.gem.gov.in/catalog_data/catalog_support_document/buyer_documents/1265076/54/78/703/CatalogAttrs/SpecificationDocument/2021/5/15/tei1079_2021-05-15-10-13-47_1e8d881b48385c90af36e20560b45742.pdf

https://mkp.gem.gov.in/catalog_data/catalog_support_document/buyer_documents/1265076/54/78/703/CatalogAttrs/SpecificationDocument/2021/5/15/tei0102_2021-05-15-10-15-12_b5e4d194220787d50353f435bdb01177.pdf


1 Anoop S S


5 90

OUTSIDE MICROMETER WITH CARBIDE TIPPED FACES-RATCHET STOP - RANGE 0-25 MMGRADUATION 0.01 ACCURACY 0 ( 8 pieces )







1 Anoop S S


8 90

OUTSIDE MICROMETERS RANGE 25-50 GRADUATION 0.01MM ACCURACY 0.02MMCARBIDE TIPPED FACES MITUTOYO CODE ( 5 pieces )







1 Anoop S S


5 90

OUTSIDE MICROMETER WITH CARBIDE TIPPED FACES, WITH RATCHET STOP, RANGE150-300mm GRADUATION 0.01mm W ( 5 pieces )


7 / 22

https://mkp.gem.gov.in/catalog_data/catalog_support_document/buyer_documents/1265076/54/78/703/CatalogAttrs/SpecificationDocument/2021/5/15/tei0124_2021-05-15-10-27-13_fb3022f3f0fcedf4662b39190972a619.pdf

https://mkp.gem.gov.in/catalog_data/catalog_support_document/buyer_documents/1265076/54/78/703/CatalogAttrs/SpecificationDocument/2021/5/15/tei0127_2021-05-15-10-34-48_b7f25a156a6657e0b20adad890887ec5.pdf






1 Anoop S S


5 90

OUTSIDE MICROMETER RANGE 300-400MM RESOLUTION 0.01 Mm WITH INTERCHANGEABLE ANVILS 0, 25, 50, 75mm M ( 3 pieces )







1 Anoop S S


3 90

OUTSIDE MICROMETER RANGE 400-500MM RESOLUTION 0.01 Mm WITHINTERCHANGEABLE ANVILS 0, 25, 50, 75mm MI ( 3 pieces )







8 / 22

https://mkp.gem.gov.in/catalog_data/catalog_support_document/buyer_documents/1265076/54/78/703/CatalogAttrs/SpecificationDocument/2021/5/15/tei0389_2021-05-15-10-39-50_fac430c0bb54433c70cc4282683abb41.pdf

https://mkp.gem.gov.in/catalog_data/catalog_support_document/buyer_documents/1265076/54/78/703/CatalogAttrs/SpecificationDocument/2021/5/15/tei1006_2021-05-15-10-41-43_74eedb6ff565317dabbd7daf73bfd907.pdf

https://mkp.gem.gov.in/catalog_data/catalog_support_document/buyer_documents/1265076/54/78/703/CatalogAttrs/SpecificationDocument/2021/5/15/tei1007_2021-05-15-10-44-24_6fb43912e630d637ed054c6249e23127.pdf

1 Anoop S S


3 90


OUTSIDE MICROMETER RANGE 500-600MM RESOLUTION 0.01 Mm WITH INTERCHANGEABLE ANVILS 0, 25, 50, 75mm M ( 3 pieces )







1 Anoop S S


3 90

OUTSIDE MICROMETER WITH INTER CHANGEABLE ANVILS RANGE 600- 700MM-GRADOATION 0.01MM MITUTOYO CODE104- ( 2 pieces )







1 Anoop S S


2 90

OUTSIDE MICROMETER WITH INTER CHANGEABLE ANVILS RANGE 700- 800MM-GRADUATION 0.01MM MITUTOYO CODE104- ( 2 pieces )


9 / 22

https://mkp.gem.gov.in/catalog_data/catalog_support_document/buyer_documents/1265076/54/78/703/CatalogAttrs/SpecificationDocument/2021/5/15/tei1008_2021-05-15-10-46-34_f89b26abe5057f7f1a2fe53721333ca9.pdf

https://mkp.gem.gov.in/catalog_data/catalog_support_document/buyer_documents/1265076/54/78/703/CatalogAttrs/SpecificationDocument/2021/5/15/tei1009_2021-05-15-10-48-42_2b3b84b26a042a75940b833d233f1653.pdf






1 Anoop S S


2 90

OUT SIDE MICROMETER WITH CARBIDE TIPPED FACES, WITH RATCHET STOP, RANGE800-900MM, GRADUATION 0.01MM ( 2 pieces )







1 Anoop S S


2 90

OUT SIDE MICROMETER WITH CARBIDE TIPPED FACES, WITH RATCHET STOP, RANGE900-1000MM, GRADUATION 0.01M ( 2 pieces )







10 / 22

https://mkp.gem.gov.in/catalog_data/catalog_support_document/buyer_documents/1265076/54/78/703/CatalogAttrs/SpecificationDocument/2021/5/15/tei1010_2021-05-15-10-49-59_962eb145e478ecdf4ea792c8644a4b38.pdf

https://mkp.gem.gov.in/catalog_data/catalog_support_document/buyer_documents/1265076/54/78/703/CatalogAttrs/SpecificationDocument/2021/5/15/tei1057_2021-05-15-10-51-18_b3b4cd3c57c0535ef111c0f6ae1ee554.pdf

https://mkp.gem.gov.in/catalog_data/catalog_support_document/buyer_documents/1265076/54/78/703/CatalogAttrs/SpecificationDocument/2021/5/15/tei1058_2021-05-15-10-54-42_0843b3bc9a83575e28a744077ea27ee5.pdf

1 Anoop S S


2 90


OUT SIDE MICROMETER WITH CARBIDE TIPPED FACES, WITH RATCHET STOP, RANGE1000-1100MM, GRADUATION 0.01 ( 2 pieces )







1 Anoop S S


2 90

OUT SIDE MICROMETER WITH CARBIDE TIPPED FACES, WITH RATCHET STOP, RANGE1100-1200MM, GRADUATION 0.01 ( 2 pieces )







1 Anoop S S


2 90

EXTENTION PIPE TYPE TUBULAR MICROMETER RANGE 50-1500 MM GRADUATION 0.01MM WITH EXTENSION PIPES 13, ( 3 pieces )


11 / 22

https://mkp.gem.gov.in/catalog_data/catalog_support_document/buyer_documents/1265076/54/78/703/CatalogAttrs/SpecificationDocument/2021/5/15/tei1059_2021-05-15-10-59-46_191db5db190139dcf16c962ffcba1c2b.pdf

https://mkp.gem.gov.in/catalog_data/catalog_support_document/buyer_documents/1265076/54/78/703/CatalogAttrs/SpecificationDocument/2021/5/15/tei1060_2021-05-15-11-01-57_d889bfe780dfd71e71a8a9cc9b5d3019.pdf






1 Anoop S S


3 90

EXTENTION PIPE TYPE TUBULAR MICROMETER RANGE 100-2100 Mm GRADUATION 0.01Mm WITH EXTENSION PIPES 25, ( 3 pieces )







1 Anoop S S


3 90

VERNIER CALIPER WITH FINE ADJUSTMENT RANGE 0-600mm. LEAST COUNT 0.02mm-ACCURACY+ /-0.05mm. MITUTOYO ( 7 pieces )







12 / 22

https://mkp.gem.gov.in/catalog_data/catalog_support_document/buyer_documents/1265076/54/78/703/CatalogAttrs/SpecificationDocument/2021/5/15/tei1091_2021-05-15-11-04-57_9022c341abe1b01c43c0166c0ef54a84.pdf

https://mkp.gem.gov.in/catalog_data/catalog_support_document/buyer_documents/1265076/54/78/703/CatalogAttrs/SpecificationDocument/2021/5/15/tei1017_2021-05-15-11-09-28_233592a2fd98adb0c246df8071dc0937.pdf

https://mkp.gem.gov.in/catalog_data/catalog_support_document/buyer_documents/1265076/54/78/703/CatalogAttrs/SpecificationDocument/2021/5/15/tei1046_2021-05-15-11-11-19_e85511bd2cd8a0fa64c5435d8fae191d.pdf

1 Anoop S S


7 90


UNIVERSAL MAGNETIC DIAL STAND WITH CENTRAL LOCKING SYSTEM ANDARTICULATED ARM NOGA CODE MG 10503/MIT ( 35 pieces )







1 Anoop S S


35 90

100X95X70mm. MAGNETIC 'V' BLOCK HARDENED WITH 3- MAGNETIC SURFACE.CLAMPING DIA 5-65MM. ACCURACIES F ( 7 pieces )







1 Anoop S S


7 90

FEELER GAUGE 150MM (LONG LEAF) RANGE 0.05-1.0MM SIZE-13 BLADES AS PER IS3179/1990-MITUTOYO BRAND 18 ( 15 pieces )


13 / 22

https://mkp.gem.gov.in/catalog_data/catalog_support_document/buyer_documents/1265076/54/78/703/CatalogAttrs/SpecificationDocument/2021/5/15/tei1040_2021-05-15-11-15-46_69d3116e933d056c31206504aadfdc63.pdf

https://mkp.gem.gov.in/catalog_data/catalog_support_document/buyer_documents/1265076/54/78/703/CatalogAttrs/SpecificationDocument/2021/5/15/tel0432_2021-05-15-11-19-07_f06f4cf471779cdba1f82b97f5151dfe.pdf






1 Anoop S S


15 90

CONCAVE AND CONVEX METRIC RADIUS GAUGE RANGE 0.5-13 MM IN INCREMENTS OF0.5MM (26 PAIRS) 90 DEGREE A ( 7 pieces )







1 Anoop S S


7 90

SPIRIT LEVEL-SIZE: 150/180MM LONG-ACCURACY 0.02MM PER METRE. ( 3 pieces )







14 / 22

https://mkp.gem.gov.in/catalog_data/catalog_support_document/buyer_documents/1265076/54/78/703/CatalogAttrs/SpecificationDocument/2021/5/15/tel1371_2021-05-15-11-22-14_f6a94ef7d06bafb4fa2d72229d64e106.pdf

https://mkp.gem.gov.in/catalog_data/catalog_support_document/buyer_documents/1265076/54/78/703/CatalogAttrs/SpecificationDocument/2021/5/15/tei1047_2021-05-15-11-24-08_4d176511dab33bd5372f10a0fb479fd3.pdf

https://mkp.gem.gov.in/catalog_data/catalog_support_document/buyer_documents/1265076/54/78/703/CatalogAttrs/SpecificationDocument/2021/5/15/tei0246_2021-05-15-11-25-33_874b42602e968bf61ac42d3de4016cdb.pdf

1 Anoop S S


3 90


MITUTOYO MAKE BORE GAUGE WITH STANDARD DIAL INDICATOR, RANGE: 18- 35MMWITH INDICATOR L. C. 0.01MM, ( 5 pieces )







1 Anoop S S


5 90

BORE DIAL WITH STANDARD DIAL INDICATOR RANGE 35-60MM GRADUATION 0.01MM-MITUTOYO CODE: 511-712 OR EQU ( 3 pieces )







1 Anoop S S


3 90

BORE GAGE WITH STANDARD DIAL INDICATOR RANGE 50-150mm- GRADUATION 0.01-PROBE DEPTH 150mm-MITUTOYO CO ( 3 pieces )


15 / 22

https://mkp.gem.gov.in/catalog_data/catalog_support_document/buyer_documents/1265076/54/78/703/CatalogAttrs/SpecificationDocument/2021/5/15/tei0438_2021-05-15-11-27-06_d74d6c83084d158dccb5d4b376f99f6d.pdf

https://mkp.gem.gov.in/catalog_data/catalog_support_document/buyer_documents/1265076/54/78/703/CatalogAttrs/SpecificationDocument/2021/5/15/tei0015_2021-05-15-11-28-55_57a4e6c34805523ee6fa7478ea1f7d3c.pdf






1 Anoop S S


3 90

VERNIER HEIGHT GAUGE RANGE: 0-300MM LEAST COUNT 0.02MM-ACCURACY+ /-0.04MM MITUTOYO CODE 514-102 OR E ( 5 pieces )







1 Anoop S S


5 90

VERNIER HEIGHT GAUGE RANGE: 0-1000MM LEAST COUNT 0.02MMACCURACY+ /-0.07MM MITUTOYO CODE 514-108 OR E ( 5 pieces )







16 / 22

https://mkp.gem.gov.in/catalog_data/catalog_support_document/buyer_documents/1265076/54/78/703/CatalogAttrs/SpecificationDocument/2021/5/15/tei0022_2021-05-15-11-30-40_737c47b93c89821a507f41f0743e9980.pdf

https://mkp.gem.gov.in/catalog_data/catalog_support_document/buyer_documents/1265076/54/78/703/CatalogAttrs/SpecificationDocument/2021/5/15/tei0100_2021-05-15-11-32-29_d7516de290f3d75baed97f60aed9ff0d.pdf

https://mkp.gem.gov.in/catalog_data/catalog_support_document/buyer_documents/1265076/54/78/703/CatalogAttrs/SpecificationDocument/2021/5/15/tei1075_2021-05-15-11-34-00_6a468972889225a49ff17b4cce6a55a7.pdf

1 Anoop S S


5 90


DIGIMATIC CALIPERS RANGE 0-150MM ACCURACY+ /-0.02MM LEAST COUNT 0.01MMMITUTOYO CODE: 500-151-30 / S ( 5 pieces )







1 Anoop S S


5 90

DIGIMATIC CALIPERS RANGE 0-300mm. RESOLUTION 0.01MM-ACCURACY 0.03MM-MITUTOYO CODE: 500-153/STARRETT ( 5 pieces )







1 Anoop S S


5 90

" DIAL INDICATOR WITH LUGGED BACK RANGE 0-10mm GRADUATION 0.01 DIALREADING 0-100 ACCURACY 0.013 RAN ( 30 pieces )


17 / 22

https://mkp.gem.gov.in/catalog_data/catalog_support_document/buyer_documents/1265076/54/78/703/CatalogAttrs/SpecificationDocument/2021/5/15/tei0267_2021-05-15-11-36-00_7d358bd04ab62e3f1920bfc4ab28f6bb.pdf

https://mkp.gem.gov.in/catalog_data/catalog_support_document/buyer_documents/1265076/54/78/703/CatalogAttrs/SpecificationDocument/2021/5/15/tei0269_2021-05-15-11-37-21_fbda677708b92eee74255bf23d5e1d74.pdf






1 Anoop S S


30 90

Buyer added Bid Specific Additional Scope of Work

S.No. Document Title Description Applicable i.r.o. Items

UNIVERSAL BEVEL PROTRACTORBLADE LENGTH 300MMGRADUATION 5'(0-90-0) -MITUTOYO CODE 187-908 OREQUIV(10),VERNIER DEPTHGAUGE RANGE 0-150MM-VERNIER READING= 0.02-ACCURACY+ /-0.03MM-BASEDIMENSIONS 100X6.5(9),VERNIER DEPTH GAUGERANGE 0-300MM-VERNIERREADING= 0.02-ACCURACY+ /-0.04MM-WITH FINE ADJUSTMENT-MITU(9),VERNIER HEIGHT GAUGERANGE 0 - 600 MM, VERNIERREADING-0.02MMACCURACY+ /-0.05MM MITUTOYO CODE NO.5(5),OUTSIDE MICROMETER WITHCARBIDE TIPPED FACES-RATCHETSTOP - RANGE 0-25 MMGRADUATION 0.01 ACCURACY0(8),OUTSIDE MICROMETERSRANGE 25-50 GRADUATION0.01MM ACCURACY 0.02MMCARBIDE TIPPED FACESMITUTOYO CODE(5),OUTSIDEMICROMETER WITH CARBIDETIPPED FACES, WITH RATCHETSTOP, RANGE 150-300mmGRADUATION 0.01mmW(5),OUTSIDE MICROMETERRANGE 300-400MM RESOLUTION0.01 Mm WITH INTERCHANGEABLE ANVILS 0, 25, 50,75mm M(3),OUTSIDEMICROMETER RANGE 400-500MMRESOLUTION 0.01 Mm WITHINTERCHANGEABLE ANVILS 0, 25,50, 75mm MI(3),OUTSIDE

18 / 22

https://mkp.gem.gov.in/catalog_data/catalog_support_document/buyer_documents/1265076/54/78/703/CatalogAttrs/SpecificationDocument/2021/5/15/tei1024_2021-05-15-11-40-36_b59618c620a670dbe774d371ed40fe13.pdf

1

Pre-QualificationCriteria (PQC)

View

Bidders shall confirm the PQC andsubmit the supporting documentswherever applicable

50, 75mm MI(3),OUTSIDEMICROMETER RANGE 500-600MMRESOLUTION 0.01 Mm WITHINTER CHANGEABLE ANVILS 0,25, 50, 75mm M(3),OUTSIDEMICROMETER WITH INTERCHANGEABLE ANVILS RANGE600- 700MM-GRADOATION0.01MM MITUTOYO CODE104-(2),OUTSIDE MICROMETER WITHINTER CHANGEABLE ANVILSRANGE 700- 800MM-GRADUATION 0.01MM MITUTOYOCODE104-(2),OUT SIDEMICROMETER WITH CARBIDETIPPED FACES, WITH RATCHETSTOP, RANGE 800-900MM,GRADUATION 0.01MM(2),OUTSIDE MICROMETER WITHCARBIDE TIPPED FACES, WITHRATCHET STOP, RANGE 900-1000MM, GRADUATION0.01M(2),OUT SIDE MICROMETERWITH CARBIDE TIPPED FACES,WITH RATCHET STOP, RANGE1000-1100MM, GRADUATION0.01(2),OUT SIDE MICROMETERWITH CARBIDE TIPPED FACES,WITH RATCHET STOP, RANGE1100-1200MM, GRADUATION0.01(2),EXTENTION PIPE TYPETUBULAR MICROMETER RANGE50-1500 MM GRADUATION 0.01MM WITH EXTENSION PIPES 13,(3),EXTENTION PIPE TYPETUBULAR MICROMETER RANGE100-2100 Mm GRADUATION 0.01Mm WITH EXTENSION PIPES 25,(3),VERNIER CALIPER WITH FINEADJUSTMENT RANGE 0-600mm.LEAST COUNT 0.02mm-ACCURACY+ /-0.05mm.MITUTOYO (7),UNIVERSALMAGNETIC DIAL STAND WITHCENTRAL LOCKING SYSTEM ANDARTICULATED ARM NOGA CODEMG10503/MIT(35),100X95X70mm.MAGNETIC 'V' BLOCK HARDENEDWITH 3- MAGNETIC SURFACE.CLAMPING DIA 5-65MM.ACCURACIES F(7),FEELER GAUGE150MM (LONG LEAF) RANGE0.05-1.0MM SIZE-13 BLADES ASPER IS 3179/1990-MITUTOYOBRAND 18(15),CONCAVE ANDCONVEX METRIC RADIUS GAUGERANGE 0.5-13 MM ININCREMENTS OF 0.5MM (26PAIRS) 90 DEGREE A(7),SPIRITLEVEL-SIZE: 150/180MM LONG-ACCURACY 0.02MM PER METRE.(3),MITUTOYO MAKE BOREGAUGE WITH STANDARD DIALINDICATOR, RANGE: 18- 35MMWITH INDICATOR L. C. 0.01MM,


19 / 22

https://bidplus.gem.gov.in/bidding/bid/documentdownload/2352216/1621064521.pdf

WITH INDICATOR L. C. 0.01MM,(5),BORE DIAL WITH STANDARDDIAL INDICATOR RANGE 35-60MM GRADUATION 0.01MM-MITUTOYO CODE: 511-712 OREQU(3),BORE GAGE WITHSTANDARD DIAL INDICATORRANGE 50-150mm- GRADUATION0.01-PROBE DEPTH 150mm-MITUTOYO CO(3),VERNIERHEIGHT GAUGE RANGE: 0-300MMLEAST COUNT 0.02MM-ACCURACY+ /-0.04MM MITUTOYOCODE 514-102 OR E(5),VERNIERHEIGHT GAUGE RANGE: 0-1000MM LEAST COUNT0.02MMACCURACY+ /-0.07MMMITUTOYO CODE 514-108 ORE(5),DIGIMATIC CALIPERS RANGE0-150MM ACCURACY+ /-0.02MMLEAST COUNT 0.01MM MITUTOYOCODE: 500-151-30 /S(5),DIGIMATIC CALIPERS RANGE0-300mm. RESOLUTION 0.01MM-ACCURACY 0.03MM-MITUTOYOCODE: 500-153/STARRETT (5),"DIAL INDICATOR WITH LUGGEDBACK RANGE 0-10mmGRADUATION 0.01 DIAL READING0-100 ACCURACY 0.013 RAN(30)


The uploaded document only contains Buyer specific Additional Scope of Work and / or Drawings for the bid items addedwith due approval of Buyer’s competent authority. Buyer has certified that these additional scope and drawings are

generalized and would not lead to any restrictive bidding.

Buyer Added Bid Specific Additional Terms and Conditions1. Actual delivery (and Installation & Commissioning (if covered in scope of supply)) is to be done at

following address MANAGER/STORES, WARD-19 BHARAT HEAVY ELECTRICALS LIMITED THIRUVERUMBURTIRUCHIRAPPALLI -620 014 TAMILNADU.

2. Bidder financial standing: The bidder should not be under liquidation, court receivership or similarproceedings, should not be bankrupt. Bidder to upload undertaking to this effect with bid.

3. Bidders are advised to check applicable GST on their own before quoting. Buyer will not take anyresponsibility in this regards. GST reimbursement will be as per actuals or as per applicable rates(whichever is lower), subject to the maximum of quoted GST %.

4. Bidder shall submit the following documents along with their bid for Vendor Code Creation:

a. Copy of PAN Card.

b. Copy of GSTIN.

c. Copy of Cancelled Cheque.

d. Copy of EFT Mandate duly certified by Bank.

5. OPTION CLAUSE: The Purchaser reserves the right to increase or decrease the quantity to be ordered upto 25 percent of bid quantity at the time of placement of contract. The purchaser also reserves the right toincrease the ordered quantity by up to 25% of the contracted quantity during the currency of thecontract at the contracted rates. Bidders are bound to accept the orders accordingly.

6. 1. The Seller shall not assign the Contract in whole or part without obtaining the prior written consent ofbuyer.

20 / 22

2. The Seller shall not sub-contract the Contract in whole or part to any entity without obtaining the priorwritten consent of buyer.3. The Seller shall, notwithstanding the consent and assignment/sub-contract, remain jointly and severallyliable and responsible to buyer together with the assignee/ sub-contractor, for and in respect of the dueperformance of the Contract and the Sellers obligations there under.

7. Without prejudice to Buyer’s right to price adjustment by way of discount or any other right or remedyavailable to Buyer, Buyer may terminate the Contract or any part thereof by a written notice to the Seller,if:i) The Seller fails to comply with any material term of the Contract.ii) The Seller informs Buyer of its inability to deliver the Material(s) or any part thereof within thestipulated Delivery Period or such inability otherwise becomes apparent.iii) The Seller fails to deliver the Material(s) or any part thereof within the stipulated Delivery Periodand/or to replace/rectify any rejected or defective Material(s) promptly.iv) The Seller becomes bankrupt or goes into liquidation.v) The Seller makes a general assignment for the benefit of creditors.vi) A receiver is appointed for any substantial property owned by the Seller.vii) The Seller has misrepresented to Buyer, acting on which misrepresentation Buyer has placed thePurchase Order on the Seller.

8. While generating invoice in GeM portal, the seller must upload scanned copy of GST invoice and thescreenshot of GST portal confirming payment of GST.

9. Scope of supply (Bid price to include all cost components) : Only supply of Goods10. Bidder Turn Over Criteria: The minimum average annual financial turnover of the bidder during the last

three years, ending on 31st March of the previous financial year, should be as indicated in the biddocument. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or acertificate from the Chartered Accountant / Cost Accountant indicating the turnover details for therelevant period shall be uploaded with the bid. In case the date of constitution / incorporation of thebidder is less than 3 year old, the average turnover in respect of the completed financial years after thedate of constitution shall be taken into account for this criteria.

11. Purchase preference to Micro and Small Enterprises (MSEs): Purchase preference will be given to MSEs asdefined in Public Procurement Policy for Micro and Small Enterprises (MSEs) Order, 2012 dated23.03.2012 issued by Ministry of Micro, Small and Medium Enterprises and its subsequentOrders/Notifications issued by concerned Ministry. If the bidder wants to avail the Purchase preference,the bidder must be the manufacturer of the offered product in case of bid for supply of goods. Traders areexcluded from the purview of Public Procurement Policy for Micro and Small Enterprises. In respect of bidfor Services, the bidder must be the Service provider of the offered Service. Relevant documentaryevidence in this regard shall be uploaded along with the bid in respect of the offered product or service. IfL-1 is not an MSE and MSE Seller (s) has/have quoted price within L-1+ 15% of margin of purchasepreference /price band defined in relevant policy, such Seller shall be given opportunity to match L-1price and contract will be awarded for percentage of 25% of total value.

12. Preference to Make In India products (For bids less than 200 Crore):Preference shall be given to Class 1local supplier as defined in public procurement (Preference to Make in India), Order 2017 as amendedfrom time to time and its subsequent Orders/Notifications issued by concerned Nodal Ministry for specificGoods/Products. The minimum local content to qualify as a Class 1 local supplier is denoted in the biddocument 50%. If the bidder wants to avail the Purchase preference, the bidder must upload a certificatefrom the OEM regarding the percentage of the local content and the details of locations at which the localvalue addition is made along with their bid, failing which no purchase preference shall be granted. In casethe bid value is more than Rs 10 Crore, the declaration relating to percentage of local content shall becertified by the statutory auditor or cost auditor, if the OEM is a company and by a practicing costaccountant or a chartered accountant for OEMs other than companies as per the Public Procurement(preference to Make-in -India) order 2017 dated 04.06.2020. Only Class-I and Class-II Local suppliers asper MII order dated 4.6.2020 will be eligible to bid. Non - Local suppliers as per MII order dated 04.06.2020are not eligible to participate. In case Buyer has selected Purchase preference to Micro and SmallEnterprises clause in the bid, the same will get precedence over this clause.

13. Nominated Inspection Agency: On behalf of the Buyer organization, any one of the followingInspection Agency would be conducting inspection of stores before acceptance:Pre-dispatch Inspection at Seller Premises (applicable only if pre-dispatch inspection clause has beenselected in ATC): BY VENDOR AT VENDOR WORKSPost Receipt Inspection at consignee site before acceptance of stores: BY BHEL QC AT BHEL TRICHY

14. Bidder's offer is liable to be rejected if they don't upload any of the certificates / documents sought in theBid document, ATC and Corrigendum if any.

15. Material Test Certificate Should Be Sent Along with The Supply. The Material Will Be Checked by Buyer’sLab & the Results of the Lab will be the Sole Criteria for Acceptance of the Item.

21 / 22

16. The bidder is required to upload, along with the bid, all relevant certificates such as BIS licence, type testcertificate, approval certificates and other certificates as prescribed in the Product Specification given inthe bid document.

17. Warranty period of the supplied products shall be 1 years from the date of final acceptance of goods orafter completion of installation, commissioning & testing of goods (if included in the scope of supply), atconsignee location. OEM Warranty certificates must be submitted by Successful Bidder at the time ofdelivery of Goods. The seller should guarantee the rectification of goods in case of any break down duringthe guarantee period. Seller should have well established Installation, Commissioning, Training,Troubleshooting and Maintenance Service group in INDIA for attending the after sales service. Details ofService Centres near consignee destinations are to be uploaded along with the bid.

18. For fulfilling the experience criteria any one of the following documents may be considered as valid prooffor meeting the experience criteria:a. Purchase Order copy along with Invoice(s) with self-certification by the bidder that supplies against theinvoices have been executed.b. Execution certificate by client with order value.c. Any other document in support of order execution like Third Party Inspection release note, etc.

19. Buyer Added text based ATC clauses

Pre-Qualification Criteria (PQC)

.

DisclaimerThe additional terms and conditions have been incorporated by the Buyer after approval of the CompetentAuthority in Buyer Organization. Buyer organization is solely responsible for the impact of these clauses on thebidding process, its outcome and consequences thereof including any eccentricity / restriction arising in thebidding process due to these ATCs and due to modification of technical specification and / or terms andconditions governing the bid. Any clause incorporated by the Buyer such as demanding Tender Sample,incorporating any clause against the MSME policy and Preference to make in India Policy, mandating any Brandnames or Foreign Certification, changing the default time period for Acceptance of material or payment timelinegoverned by OM of Department of Expenditure shall be null and void and would not be considered part of bid.Further any reference of conditions published on any external site or reference to external documents / clausesshall also be null and void. If any seller has any objection / grievance against these additional clauses orotherwise on any aspect of this bid, they can raise their representation against the same by using theRepresentation window provided in the bid details field in Seller dashboard after logging in as a seller within 4days of bid publication on GeM. Buyer is duty bound to reply to all such representations and would not beallowed to open bids if he fails to reply to such representations.

This Bid is also governed by the General Terms and Conditions

In terms of GeM GTC clause 26 regarding Restrictions on procurement from a bidder of a country which shares a land border with India, any bidder from a country whichshares a land border with India will be eligible to bid in this tender only if the bidder is registered with the Competent Authority. While participating in bid, Bidder has toundertake compliance of this and any false declaration and non-compliance of this would be a ground for immediate termination of the contract and further legal actionin accordance with the laws.

---Thank You---

22 / 22

https://gem.gov.in/termsCondition

Bid Document - Bharat Heavy Electricals Limited

Documents

Transcript of Bid Document - Bharat Heavy Electricals Limited