Adams Rite - ASSA ABLOY Canada
-
Upload
khangminh22 -
Category
Documents
-
view
0 -
download
0
Transcript of Adams Rite - ASSA ABLOY Canada
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
3
ASSA ABLOY Door Security Solutions Canada, a division of ASSA
ABLOY Canada Ltd. and all of its current and future associated
companies, subsidiaries and operating brands (hence forth referred to
as ASSA ABLOY DSS Canada) reserve the right to decline an order, in
whole or in part, when the type or quantity of goods or credit worthiness of
the Purchaser is not satisfactory to us in our sole and absolute discretion.
The terms and conditions contained herein constitute the entire agreement
between the parties.
Purchase Orders, Quotations (“Quote”) requests, Acknowledgements or
the like issued by the Purchaser that have contrary standard terms and
conditions are not binding on ASSA ABLOY DSS Canada , unless such
terms and conditions are approved in a separate written agreement by
ASSA ABLOY DSS Canada’s authorized representatives. In the event
of an acceptance of Purchaser’s Purchase Order by ASSA ABLOY DSS
Canada, the Purchaser agrees that such acceptance is solely conditioned
on Purchaser’s acceptance of the terms and conditions set forth in this
instrument, regardless of the terms and conditions specified in the
Purchaser’s Purchase order. The terms and conditions in Purchaser’s
Purchase Order which conflict with terms and conditions of this instrument
shall be disregarded and are hereby rejected, and
this instrument shall constitute the entire agreement between ASSA
ABLOY DSS Canada and the Purchaser. In the event that ASSA ABLOY
DSS Canada does not enforce or require strict performance of any term or
condition hereof, or of any other document, instrument or other agreement
relating to goods sold, such lack of enforcement or requirement of strict
performance will not waive, affect or diminish any right of ASSA ABLOY
DSS Canada to enforce or require strict performance of such term or
condition in the future.
PRICES:All prices are subject to change without notice and are not guaranteed.
All shipments will be made at prices in effect at the time of order
acceptance. Possession of this price list does not constitute an
agreement to sell. Acknowledgements, invoices and quotations are on
an “Errors and Omissions Excepted” basis (commonly referred to as
E.O.E.). We reserve the right to correct clerical, stenographic and other
obvious errors at any time.
TERMS:2% tenth of the month following, net thirty (30) days after statement date.
It is understood that ASSA ABLOY DSS Canada may impose and charge
a finance charge of 2% per month or the highest rate allowed by law
on any amount which becomes past due and delinquent. Additionally,
the Customer shall be responsible for all collection costs, court costs
and reasonable attorney’s fees in connection with the recovery of any
delinquent amount.
MINIMUM INVOICE:Minimum invoice for complete product is $250.00 net product value.
The minimum invoice for parts orders is $100.00 net product value. Any
orders not totalling these minimums will be invoiced at the minimums.
This policy does not include the following: Cut (bitted) Keys of any type,
Master Keyed Cylinders, Master Keyed Padlocks and Factory Generated
Bitting Lists. Same day order expedites will be invoiced at book less 50%.
QUOTATIONS:If ASSA ABLOY DSS Canada elects to offer a Quote, such Quote will
be valid for ninety (90) days. Complete shipment of the order must
be accepted by Purchaser within nine (9) calendar months from the
date of issuance.
The Quote number and project name must be referenced on the order.
Any invoiced order that has the incorrect discount applied to it and did not
have a Quote copy attached to the order or the Quote number written on
the order will have a service fee of $75.00 net DEDUCTED from any sales
credit issued for the difference in discount.
The Quote is null and void if the Purchase Order does not include ALL
product lines listed on the Quote or if the quantities for an item covered
by the Quote deviate by 10% or more. The Purchaser will have to solicit a
new quotation.Changes to original quote will be accepted up to thirty (30)
days from the date of the original quote. All changes must reference the
original quote number.
With the issuance and acceptance of a Quote for the purchase of
products, the Purchaser agrees that products so purchased will not be
resold or transferred to any Distributor not authorized by ASSA ABLOY
DSS Canada to sell its products. This would be inclusive of branches of
the quoted Distributor. Failure to abide by this restriction may result in the
Distributor’s ineligibility for Quotes, or other actions in ASSA ABLOY DSS
Canada’s discretion.
ASSA ABLOY DSS Canada and its sales representatives reserve the
right, in their sole discretion and for any reason, to refuse a Distributor’s
request to quote a price other than ASSA ABLOY DSS Canada’s standard
list price and regardless of whether ASSA ABLOY DSS Canada or its
sales representatives have previously quoted discounted prices to the
Distributor on some or all of its orders.
SPECIAL ORDERS:Products not cataloged or listed in this price book will be considered as
special products, and will not be manufactured without prior approval
from ASSA ABLOY DSS Canada.
A minimum special handling charge of $50.00 will be added for non-
cataloged product. Any additional labour or material required will be
charged accordingly. Special products require special handling, and
LIMITED WARRANTY
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
4
therefore standard lead times may not apply. Please consult with your
Sales Representative for further details.
HIGH SECURITY ORDERS:To ensure proper control of End User restricted Products, ASSA ABLOY
DSS Canada requires that the End User complete a Delivery of Controlled
component form indicating to whom the product will be shipped to upon
leaving the factory or the distribution centre.
All orders must be accompanied with a current copy of the Authorization
form and must be signed by the proper authorized personnel whose
name(s) is on file with ASSA ABLOY DSS Canada.
High Security products are defined as high security key blanks, cut
keys, sidebars, sub assemblies, complete and master-keyed cylinders,
and key charts.
ASSA ABLOY DSS Canada reserves the right to request authorization
from the end user if necessary before the order is processed.
CHANGES / CANCELLATION OF ORDERS:Changes or cancellations to a non stock order that has been released
to production will be subject to a charge of costs for material and labour
expenses that have been incurred prior to notification from Customer.
Handling charges are billed on Customer’s original order.
All change requests for Mercury or Turbo goods must be submitted in
writing to Customer Service within two (2) business days of receipt of
acknowledgement of the order. In those instances where a cancellation
is accepted, ASSA ABLOY DSS Canada reserves the right to make a
reasonable cancellation charge based on expenses incurred.
PACKAGING:Many items are defined as to Case Lot Packaging or Minimum Order.
The case lot policy does not apply to hardware to be used on a specific
hardware project.
DELIVERY:Orders will be acknowledged and given a scheduled delivery date based
on estimated manufacturing lead times. Complete information is required
to process all orders. Orders with insufficient information for processing
(i.e. keying information, door sizes, etc.) may be subject to extended lead
times which are relative to the time required in obtaining the necessary
information
for order processing. Manufacturing lead time will begin once all
information is received to process an order. ASSA ABLOY DSS Canada
will use reasonable efforts to deliver products as estimated, but makes no
guarantee as to delivery dates.
ASSA ABLOY DSS Canada will not be liable for back charges incurred
based on availability of product or as a result of delays in delivery caused
by insufficient information required to process an order. ASSA ABLOY
DSS Canada will not be held responsible for delays in delivery caused by
strikes, fires, floods or any other causes beyond our control, including the
delivery of material to us. Under no circumstances shall
ASSA ABLOY DSS Canada be liable or accountable for consequential
damages due to failure of delivery.
Unless your order specifies otherwise, partial shipments will be made on
or after the scheduled delivery date.
TERMS OF SHIPMENT:All products are shipped FOB the factory or the distribution center unless
otherwise agreed to in writing from ASSA ABLOY DSS Canada. Title to
and risk of loss product shipped is the responsibility of the purchaser and
delivery is deemed to be complete upon transfer of the product to a common
carrier. Carriers carry limited insurance. If the customer requires additional
insurance coverage please contact our customer service department.
All claims for shortages and damage are the responsibility of the
purchaser. ASSA ABLOY DSS Canada will assist the Purchaser with
documentation necessary to make a claim if requested to do so by the
purchaser. ASSA ABLOY DSS Canada will ship via the best possible
carrier. Shipments at the customer’s request will be prepaid and any up-
charge (actual cost less the amount negotiated by ASSA ABLOY DSS
Canada) will be added to the invoice.
CLAIMS:In the event of ASSA ABLOY DSS Canada or Customer error, claims
for shortages, pricing errors and/or incorrectly filled orders must be
submitted in writing to Customer Service within thirty (30) days from
receipt of material. Any claims for shortages or damage by the Carrier
must be made by the Customer directly to the Carrier. Limited Carrier
insurance is typically offered for all orders. If the Customer requires
additional insurance, please contact a ASSA ABLOY DSS Canada
Customer Service Representative upon submittal of the order.
ASSA ABLOY DSS Canada will obtain requested insurance and the
additional cost will be included on Customer’s invoice.
INVOICE DEDUCTION:A ASSA ABLOY DSS Canada Sales Representative or Customer Service
Representative must be notified of any disputed invoices within thirty (30)
days from the date of invoice. Deductions should only be taken for the
disputed amount and the balance of the invoice is due and payable within
standard payment terms.
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
5
RETURNED GOODS:No Material is to be returned to our facilities without prior written approval
from customer service. It is the policy of ASSA ABLOY DSS Canada to
not accept returns of any materials that are correctly furnished as per the
Distributor’s Purchase Order.
Mercury and Turbo material may be returned with approval, if ASSA
ABLOY DSS Canada believes the product is resalable. All such product
must be returned in its original unmarked carton. The goods must have
been shipped and invoiced in the previous sixty (60) days. Returns
will be at the distributor’s expense. The goods returned will be subject
to inspection and a minimum 20% restocking fee will be applied to
compensate for the cost of inspection, repacking and handling.
Return of product due to customer order error or accommodation must
be pre-arranged with ASSA ABLOY DSS Canada and approved in writing
by Sales Management. A minimal restocking fee of 50% will be charged.
Upon receipt and verification by ASSA ABLOY DSS Canada that the
returned merchandise is in saleable condition and that the material can
be returned to the original manufacturer.
Defective goods that are out of warranty period will not be accepted for
return. Products that are masterkeyed, special orders, key bitted will not
be accepted under any circumstances, unless the product is determined
to be defective.
PROCEDURE:Ensure the RGA labels that are sent to Purchaser by ASSA ABLOY
DSS Canada are visible on return goods shipment. Ensure that the RGA
number appears on the return shipment label and is legible. Return the
authorized merchandise within sixty (60) days from the date of RGA
issuance. Return shipments must be freight prepaid to the distribution
centre (at time some directions may apply to return the goods to the
original manufacturer) ASSA ABLOY DSS Canada is not liable for
damages to product during shipping.
No credit may be taken or issued prior to RGA approval and receipt of
product. All defective goods within the terms of our limited warranty may
be returned for repair or replacement only.
TAXES:Prices do not include any present or future Federal, Province, or Local
property, license, privilege, sales, use, excise, gross receipts or other
like taxes or assessments, which may result from transactions or any
services performed in connection herewith.
GOVERNING LAW:The rights and obligations of the parties shall be governed by the laws
of the Province of Ontario, excluding any conflicts of law provisions. The
United Nations Convention on Contracts for the International Sale of
Goods shall not apply to this
INDEMNITY:Purchaser shall indemnify ASSA ABLOY DSS Canada and hold ASSA
ABLOY DSS Canada harmless against all claims, liability, loss or other
damages (including costs, legal or other wise incurred by ASSA ABLOY DSS
Canada) to all persons for injury of any nature, including sickness and/or
death, property damage at the time of delivery or after when the product
is no longer in ASSA ABLOY DSS Canada possession or control.
FORCE MAJEUR:ASSA ABLOY DSS Canada shall not be liable for its failure to perform due
to any contingencies beyond its control, including but not limited to acts of
God, fires floods, wars, sabotage, accidents, labour disputes, shortages,
government laws, ordinances, rules and regulations.
ASSA ABLOY DSS Canada shall not be liable for its failure to deliver due to its
inability to obtain materials, equipment failure, labour actions, transportation
issues or any similar contingencies. In the event of delays due to the
aforementioned contingencies, the date of delivery will be postponed by
such length of time as the circumstances dictate.
COPYRIGHTS AND PATENTS:All products in ASSA ABLOY DSS Canada catalogues, brochures and
price lists are either patented, Copyrighted or registered by ASSA ABLOY
DSS Canada.
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
6
General InformationAdams Rite Limited Warranty/Terms and Conditions ���������������������� 3
Table of Contents �������������������������������������������������4-5
Products
DEADLOCKS
RT1050D RITE Touch®Digital Glass Door Lock �������������������������� 6
1830 Bottom Rail Deadlock(Swingbolt) ��������������������������������� 6
MS1837 Series MS® Two-Point Deadlock ������������������������������� 6
MS1847 Series MS® Deadlock ���������������������������������������� 7
MS1850S Series MS® Deadlock �������������������������������������� 7
MS1850SN Series MS® Deadlock (ANSI Size) ��������������������������� 8
MS1861 Series MS® Bottom Rail Deadlock ������������������������������ 8
1875 Two-Point Deadlock ������������������������������������������� 8
MS+1890 Series MS® Deadlock/Deadlacth ������������������������������ 9
MS1950 Series MS® Deadlock ���������������������������������������� 9
2190 Dual Force® Interconnected Deadbolt/Deadlatch for Aluminum Stile Doors �� 10
2290 Dual Force® Interconnected Deadbolt/Deadlatch for Stile and Rail Wood or Hollow Metal Doors ��������������������������������������������� 11
2331 Heavy Duty Deadbolt ����������������������������������������� 11
4070 Series Short Throw Deadbolt (Projection Style) ��������������������� 12
4189, 4190 Flush Locksets (Including Deadlock) ������������������������ 12
4430, 4431 Flush Locksets (Including Deadlock) ������������������������ 13
5017 Wood Door Deadbolt ������������������������������������������ 13
5055 Wood Door Deadlock for Sliding Doors ��������������������������� 13
DEADLATCHES
4300 Electrified Deadlatch (eLatch) – Steel Hawk ����������������������� 14
4300 RITE Pack �������������������������������������������������� 14
4510 Standard Duty Deadlatch �������������������������������������� 15
4530 Standard Duty Deadlatch �������������������������������������� 15
4781 Two-Point Deadlatch with Paddle �������������������������������� 16
4900 Heavy Duty Deadlatch ���������������������������������������� 16
4920AN Heavy Duty Deadlatch (ANSI Size) ���������������������������� 16
FLUSHBOLTS & PIVOTS
1870 Cylinder-Operated Flushbolt ������������������������������������ 17
1870HM Cylinder-Operated Flushbolt ��������������������������������� 17
1877 Cylinder-Operated Flushbolt ������������������������������������ 17
MS1880, MS1881 Two-Point Flushbolts ������������������������������� 18
MS2180 Auto-Release Two-Point Flushbolt ���������������������������� 18
B1921, B1923 Reinforcing Pivots ������������������������������������� 18
EXIT DEVICES
8099 Dummy Pushbar ��������������������������������������������� 19
3100, 8100 Surface Vertical Rod Exit Device ��������������������������� 19
8200 Narrow Stile Surface Vertical Rod Exit Device ��������������������� 20
3300, 8300 Mortise Exit Device �������������������������������������� 20
8400 Narrow Stile Mortise Exit Device �������������������������������� 21
3600, 8500 Metal Door Concealed Vertical Rod Exit Device ��������������� 22
8600 Narrow Stile Concealed Vertical Rod Exit Device ������������������� 22
3700, 8700 Rim Exit Device ����������������������������������������� 23
8800 Narrow Stile Rim Exit Device ����������������������������������� 23
3900, 8900 Wood Door Concealed Vertical Rod Exit Device ��������������� 24
ACCESSORIES FOR EXIT DEVICES �������������������������������� 24
KITTED OPTIONS FOR EXIT DEVICES ������������������������������ 25
MODIFICATION OPTIONS FOR EXIT DEVICES ����������������������� 25
ELECTRIC STRIKES
7100, 7101 Electric Strikes ����������������������������������������� 25
7110, 7111 Electric Strikes ����������������������������������������� 26
7130, 7131 Electric Strikes ����������������������������������������� 26
7140 Electric Strike ����������������������������������������������� 27
7160 Electric Strike ����������������������������������������������� 27
7170 Electric Strike ����������������������������������������������� 27
7100 Series Electric Strikes Components ����������������������������� 28
7240 Fire-Rated Electric Strike ������������������������������������� 29
7270 Fire-Rated Electric Strike ������������������������������������� 29
Ultraline 7400, 7401 Electric Strikes ��������������������������������� 30
Ultraline 7410, 7411 Electric Strikes ���������������������������������� 30
Ultraline 7430, 7431 Electric Strikes ��������������������������������� 31
Ultraline 7440 Electric Strikes �������������������������������������� 31
Ultraline 74R1 Electric Strikes �������������������������������������� 31
Ultraline 74R2 Electric Strikes �������������������������������������� 32
7400 Series Electric Strikes Components ����������������������������� 32
TABLE OF CONTENTS
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
7TABLE OF CONTENTS
TRIM
1000 Series Turns ������������������������������������������������ 33
3000 Fixed Pull ��������������������������������������������������� 33
3080 Series Entry Trim ��������������������������������������������� 34
3090, 3090P/C eForce® Keyless Entry �������������������������������� 35
A100-3090H Keyless Entry and Aperio® Hub Wholesale Kit ��������������� 35
4060 Turn ������������������������������������������������������� 36
4550 MS® Deadlock Lever ������������������������������������������ 36
4560, 4565 Series Deadlatch Handles for 4300, 4500, 4900 ��������������� 36
4560-010, 4565-010 Series Deadlatch Handles for MS+1890 ������������� 37
4568, 4569 Eurostyle Deadlatch Handles ����������������������������� 37
4568-010, 4569-010 Series Deadlatch Handles for MS+1890 ������������� 38
4590 Deadlatch Paddle for 4300, 4500, 4900 �������������������������� 38
4590-1X Deadlatch Paddle for MS+1890, 2190 ������������������������� 39
4591 Deadlatch Paddle for 4300, 4500, 4900 �������������������������� 39
4591-1X Deadlatch Paddle for MS+1890, 2190 �������������������������� 40
4600 Heavy Duty Designer Deadlatch Handle �������������������������� 41
CYLINDERS
4024, 4025, 4029 Cylinder Pulls ������������������������������������� 42
4036 Mortise Cylinder ��������������������������������������������� 42
MS4043 Cylinder Guard ������������������������������������������� 43
4066 Thumbturn ������������������������������������������������� 43
4580 Cam Disc �������������������������������������������������� 43
4581 Universal Cam Disc ������������������������������������������ 44
8650 Cylinder Escutcheon Kit ��������������������������������������� 44
8736 Rim Cylinder ������������������������������������������������ 44
ACCESSORIES
4014 Two-Point Conversion Kit �������������������������������������� 45
4015 Threshold Bolt ����������������������������������������������� 45
4016 Header Bolt ������������������������������������������������� 45
4085 Header Bolt (Pairs of Doors Only) ������������������������������� 45
4089 Exit Indicator ������������������������������������������������ 46
4104 Mounting Bridges ��������������������������������������������� 46
91-0965 Universal Mounting Tab Kits for Installing MS® Locks & Latches ����� 46
2190 Dual Force® Interconnected Deadbolt/Deadlatch Strikes ������������� 46
2290 Dual Force® Interconnected Deadbolt/Deadlatch Strikes ������������� 47
4000 Series MS® Deadlock Strikes ����������������������������������� 47
4800, MS 4804 Series Strikes ��������������������������������������� 47
4901, 4902 Deadlatch Strikes ��������������������������������������� 48
4304 Deadlatch Strike ��������������������������������������������� 48
THICK DOOR KITS
2190, 2290 Dual Force® Interconnected Deadbolt/Deadlatch Thick Door Kit �� 48
4568, 4569 Eurostyle Deadlatch Handles Thick Door Kits ���������������� 49
FACEPLATES
MS1850S, MS1850A, MS1950 Deadlocks (Long Throw) Faceplates ��������� 49
MS1850S, MS1850A, MS1950 Deadlocks (Hookbolt and Short Bolt) Faceplates ��������������������������������������������������������������� 49
MS1850S Deadlocks Faceplates ������������������������������������� 49
MS1850SN Deadlocks (Long Throw) Faceplates ������������������������ 49
MS1850SN Deadlocks (Hookbolt) Faceplates �������������������������� 50
1870 Flushbolt Faceplates ������������������������������������������ 50
MS+1890 Deadlock Faceplates �������������������������������������� 50
2331 Heavy Duty Deadbolt Faceplates �������������������������������� 50
3300 Fire-Rated Mortise Exit Device Faceplates ������������������������ 50
4070 Short Throw Deadbolt Faceplates ������������������������������� 51
4500 Standard Duty Deadlatch Faceplates ����������������������������� 51
4530 Standard Duty Deadlatch Faceplates ����������������������������� 51
4900 Heavy Duty Deadlatch Faceplates ������������������������������� 51
4900 Heavy Duty Deadlatch Special Faceplates ������������������������ 51
4920, 8300 Faceplates �������������������������������������������� 51
7100, 7160 Electric Strikes Faceplates �������������������������������� 52
7101 Electric Strikes Faceplates ������������������������������������� 52
7110 Electric Strikes Faceplates ������������������������������������� 52
7111 Electric Strikes Faceplates ������������������������������������� 52
7130 Electric Strikes Faceplates ������������������������������������� 52
7131 Electric Strikes Faceplates ������������������������������������� 52
7140, 7170 Electric Strikes Faceplates �������������������������������� 52
POWER
PS-SE Power Supply ���������������������������������������������� 53
PS-1 Power Supply ������������������������������������������������ 53
PS-LR Power Supply ���������������������������������������������� 53
4603, 4605, 4606 Transformer/Rectifier/Plezo Horn ��������������������� 54
4612 Power Transfer Device ���������������������������������������� 54
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
8
RT1050D RITE Touch® Digital Glass Door LockMODELS
RT1050D Digital glass door lock for single or double doors $684.00
RT-5C-1050 Extra cards (package of 5 cards) $69.00
HOW TO ORDER Specify quantity and the following information.
RITE TOUCH MODEL
RT 1050D1050D For single or double doors
1830 Bottom Rail Deadlock (Swingbolt)
sw 1830
MODEL & FINISHES 313, 628
1830 31/32", or 1-1/8" cylinder height $160.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. DASH NO. (SPECIFY FOR CYLINDER HEIGHT AND LOCK DEPTH) FINISH
1830 -02 -62802 Cylinder Height 31/32" Dim. "A" 1-5/8" 628 Clear Anodized
03 Cylinder Height 1-1/8" Dim. "A" 1-25/32" 313 Dark Bronze Anodized
MS1837 Series MS® Two-Point Deadlock MODELS & FINISHES 313, 335,
628 605, 626
MS1837 Includes 4001-011 strike, 36" cylinder height $282.00 $345.00
MS1837 Cylinder height other than 36" (maximum cylinder height 65”) $311.00 $374.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. FINISH
MS1837 -313313 Dark Bronze Anodized 626 Satin Chrome
335 Black Anodized 628 Clear Anodized
605 Bright Brass
If cylinder height other than 36” is required, specify exact height from bottom of door to cylinder center. Maximum cylinder height 65”.
DEADLOCKS
DEADLOCKS
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
9
MS1847 Series MS® Deadlock/DeadlatchMODEL & FINISH 630
MS1847 Deadlock, stainless steel $69.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. FACE SHAPE, HUB ANGLE, LOCK OR LATCH FINISH
MS1847 -02 -630 (See Configuration table below)
(Blank) -02 -06
-09 -10 -11
-13SELF-
LATCHING
SELF-LATCHING
VERT.
VERT.
22.5° 22.5°
45° 45°
45°
630 Satin Stainless
MS1850S, MS1850S-050 Series MS® Deadlock
MODELS & BACKSETS 7/8" 31/32", 1-1/8", OR 1-1/2"
MS1850S Flat faceplate, any handing, 313, 335, or 628 finish, without strike $92.00 $82.00
MS1851S Radius faceplate, any handing, 313, 335, or 628 finish, without strike $92.00 $82.00
MS1851SW Radius faceplate with weatherstrip, any handing, 313, 335, or 628 finish, without strike
$96.00 $84.00
MS1852S Bevel faceplate, any handing, 313, 335, or 628 finish, without strike $92.00 $82.00
Schoolhouse function for above locks add $48.
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. FACEPLATE BACKSET BOLT SHAPE HANDING FINISH
MS185 0S -2 1 0 -6280S Flat 1 7/8" 1 Straight 5 LH or RHR 313 Dark Bronze Anodized
1S Radius 2 31/32" 5 Hookbolt 6 RH or LHR 335 Black Anodized
1SW Radius with weatherstrip 3 1-1/8" 0 Non-Handed* 628 Clear Anodized
2S Bevel 4 1-1/2"
*Any flat or radius faceplate, except Schoolhouse.
DEADLOCKS
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
10
MS1850SN, MS1850SN-050 Series MS® Deadlock (ANSI Size)
MODELS
MS1850SN Flat faceplate, any handing, 313, 335, or 628 finish, without strike $114.00
MS1851SN Radius faceplate, any handing, 313, 335, or 628 finish, without strike $114.00
MS1852SN Bevel faceplate, any handing, 313, 335, or 628 finish, without strike $114.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. FACEPLATE ANSI SIZE BOLT SHAPE HANDING FINISH
MS185 0 SN -41 0 -6280 Flat 41 Straight 5 LH or RHR 313 Dark Bronze Anodized
1 Radius 45 Hookbolt 6 RH or LHR 335 Black Anodized
2 Bevel 0 Non-Handed* 628 Clear Anodized
*Any flat or radius faceplate, except schoolhouse.
MS1861 Series MS® Bottom Rail Deadlock
sw m
s 1861
MODELS & FINISH 603
MS1861-01 One-point deadlock, vertical bolt operation only $166.00
MS1861-02 Two-point deadlock, horizontal and vertical operation $210.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. BOLT OPERATION FINISH PACKAGING
MS1861 -01 -603 -IB01 Vertical Bolt Only 603 Zinc plated steel IB Individually Boxed
02 Vertical and Horizontal Bolts
If tube spacers are required, specify QUANTITY and LENGTH.
1875 Two Point Deadlock MODEL & FINISH 603
1875 Two-point deadlock $204.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. PACKAGING
1875 -IBIB Individually Boxed
DEADLOCKS
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
11
MS+1890 Series MS® Deadlock/DeadlatchMODELS & FINISHES 628, 313, 335
MS+1890 Flat faceplate, any handing, 31/32", 1-1/8", or 1-1/2" backset $284.00
MS+1891 Radius faceplate, any handing, 31/32", 1-1/8", or 1-1/2" backset $284.00
MS+1891W Radius faceplate with weatherstrip, any handing, 31/32", 1-1/8", or 1-1/2" backset $296.00
MS+1892 Bevel faceplate, any handing, 31/32", 1-1/8", or 1-1/2" backset $284.00
MODEL
MS+1893-IB Without faceplate, without strike $225.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. FACEPLATE BACKSET STRIKE SHAPE/LIP LENGTH HANDING FINISH
MS+189 1 -3 02 6 -6280 Flat 2 31/32" 01 Flat/Standard Jamb 5 LH or RHR 313 Dark Bronze Anodized
1 Radius 3 1-1/8" 02 Radius/Standard Stile 6 RH or LHR 335 Black Anodized
1W Radius with weatherstrip 4 1-1/2" 17 Flat/Center Hung 4" Jamb 628 Clear Anodized
2 Bevel 21 Flat/Center Hung 4-1/2" Jamb
For door thickness other than 1-3/4”, contact factory.
MS1950, MS1950-050 Series MS® Deadlock
MODELS
MS1950 Flat faceplate, any handing, 313, 335, or 628 finish, 31/32", 1-1/8", or 1-1/2" backset $149.00
MS1951 Radius faceplate, any handing, 313, 335, or 628 finish, 31/32", 1-1/8", or 1-1/2" backset $149.00
MS1951W Radius faceplate with weatherstrip, any handing, 313, 335, or 628 finish, 31/32", 1-1/8", or 1-1/2" backset $151.00
MS1952 Bevel faceplate, any handing, 313, 335, or 628 finish, 31/32", 1-1/8", or 1-1/2" backset $149.00
Schoolhouse function for above locks add $48.
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. FACEPLATE BACKSET BOLT SHAPE HANDING FINISH
MS195 0 -2 1 0 -6280 Flat 2 31/32" 1 Straight 5 LH or RHR 313 Dark Bronze Anodized
1 Radius 3 1-1/8" 5 Hookbolt 6 RH or LHR 335 Black Anodized
1W Radius with weatherstrip 4 1-1/2" 0 Non-Handed* 628 Clear Anodized
2 Bevel
*Any flat or radius faceplate except schoolhouse.
DEADLOCKS
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
12 DEADLOCKS
2190 Dual Force® Interconnected Deadbolt/Deadlatch for Aluminum Stile Doors
STANDARD TRIM SET ELECTRIFIED TRIM SET LOW PROFILE TRIM
MODELS & TRIM SETS10B, US32,
US32D US3, US4
10B, US32, US32D
US3, US4
10B, US32, US32D
US3, US4
2190 Deadbolt/Deadlatch with flat or radius strike, standard series handle designation (01, 02, 03)
$696.00 $708.00 $885.00 $897.00 $577.00 $590.00
2190 Deadbolt/Deadlatch with flat/centerhung 4” or 4.5” strike, standard series handle designation (01, 02, 03)
$715.00 $727.00 $904.00 $916.00 $596.00 $609.00
2190 Deadbolt/Deadlatch with flat or radius strike, designer lever series designation (MD through MW)
$748.00 $760.00 $937.00 $949.00 $629.00 $642.00
MODELS & FINISHES 628, 313, 335 N/A
2190 BOXED LOCK Less lever trim, with adjustable faceplate and choice of standard or radius strike $325.00
EK-2190 Electrification Kit 12/24 VAC/VDC (not compatible with low profile trim) $163.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. BACKSET STRIKE FACEPLATE FINISH TRIM HANDLE DESIGNATION TRIM AND HANDLE FINISH
2190 -3 1 1 -1 01 32D3 1-1/8" 0 None 1 Clear Anodized 628 0 None 00 No Handle 03 Bright Brass (US3)
4 1-1/2" 1 Standard Flat 2 Dark Bronze Anodized 313 1 With Trim Set STANDARD SERIES: 04 Satin Brass (US4)
2 Radius Strike 3 Black Anodized 335 2 With Electrified Trim Set 01 Curve 10B Dark Bronze (US10B)
3 Flat/Center Hung 4" 3 Low Profile Trim 02 Round 32 Bright Stainless (US32)
4 Flat/Center Hung 4-1/2" 03 Square 32D Satin Stainless (US32D)
DESIGNER SERIES:
MD MJ
ME MN (Handed)
MG MV (Handed)
MI MW
Trim options 1 and 2 are for outswing doors only.
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
13 DEADLOCKS
2290 Dual Force® Interconnected Deadbolt/Deadlatch for Wood or Hollow Metal Stile and Rail Doors
STANDARD TRIM SET ELECTRIFIED TRIM SET LOW PROFILE TRIM
MODELS & TRIM SETS10B, US32,
US32D US3, US4
10B, US32, US32D
US3, US4
10B, US32, US32D
US3, US4
2290 Deadbolt/Deadlatch with flat or radius strike, standard series handle designation (01, 02, 03)
$715.00 $728.00 $904.00 $917.00 $596.00 $609.00
2290 Deadbolt/Deadlatch with flat or radius strike, designer series handle designation (MD through MW)
$767.00 $780.00 $956.00 $969.00 $648.00 $661.00
MODELS & FINISHES 313, 335, 628 N/A
2290 BOXED LOCK Less lever trim, with adjustable faceplate and standard strike $325.00
EK-2190 Electrification Kit 12/24 VAC/VDC (not compatible with low profile trim) $163.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. BACKSET STRIKE FACEPLATE FINISH TRIM HANDLE DESIGNATION TRIM AND HANDLE FINISH
2290 -3 1 1 -1 01 32D3 1-1/8" 0 None 0 US to match trim finish 0 None 00 No Handle 03 Bright Brass (US3)
4 1-1/2" 1 Standard Flat 1 Clear Anodized 628 1 With Trim Set STANDARD SERIES: 04 Satin Brass (US4)
2 Dark Bronze Anodized 313
2 With Electrified Trim Set 01 Curve 10B Dark Bronze (US10B)
3 Black Anodized 335 3 Low Profile Trim 02 Round 32 Bright Stainless (US32)
03 Square 32D Satin Stainless (US32D)
DESIGNER SERIES:
MD MJ
ME MN (Handed)
MG MV (Handed)
MI MW
Trim options 1 and 2 are for outswing doors only.
2331 Heavy Duty DeadboltMODEL & FINISHES 121, 626 605, 625
2331 Deadlock and strike $347.00 $365.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. FINISH
2331 -626121 To Match Dark Bronze Anodized 313
605 Bright Brass
625 Bright Chrome
626 Satin Chrome
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
14
4070 Series Short Throw Deadbolt (Projection Style)MODELS & FINISHES 313, 335, 628
4070 Flat faceplate, 7/8", 31/32", or 1-1/8" backset $191.00
4071 Radius faceplate, 7/8", 31/32", or 1-1/8" backset $191.00
4072 Bevel faceplate, 7/8", 31/32", or 1-1/8" backset $191.00
MODEL
4073 Without faceplate $183.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. FACEPLATE BACKSET HANDING FINISH
407 2 -2 6 -6280 Flat 1 7/8" 5 LH or RHR 313 Dark Bronze Anodized
1 Radius 2 31/32" 6 RH or LHR 335 Black Anodized
2 Bevel 3 1-1/8" 0 Non-Handed* 628 Clear Anodized
*Any flat or radius faceplate.
4189, 4190 Flush Locksets (Including Deadlock)MODELS & FINISHES STANDARD
LOCK FACESTAINLESS STEEL
LOCK FACE
4189-IB Flush lockset, individually boxed $100.00 $108.00
4190-IB Flush lockset, individually boxed with cylinder $140.00 $148.00
4195-IB Dummy flushset, individually boxed $70.00 $78.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO.
LOCKSET EXTERIOR LOCK FACE STILE
THICKNESS FINISH KEYING OPTIONS PACKAGING
41 90 -09 -1 -130 -01 IB
89 Without Cylinder 00 Without Lock 1 1" to 1-3/8" 130 To match Clear Anodized 628 00 Without Cylinder IB Individually Boxed
90 With Cylinder 09 Radius 2 1-7/16" to 1-5/8" 121 To match Dark Bronze Anodized 313 01 Keyed Different
95 Dummy 09S Radius Stainless Steel 3 1-11/16" to 2" 119 To match Black
Anodized 335 02 Keyed Alike in Pairs
10 Square
10S Square Stainless Steel
DEADLOCKS
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
15
4430, 4431 Flush Locksets (Including Deadlock)
MODELS & FINISH STANDARD LOCK FACE
STAINLESS STEEL LOCK FACE
4430-IB ABS flush lockset, individually boxed $72.00 $80.00
4431-IB ABS flush lockset with cylinder, individually boxed $112.00 $120.00
4432-IB ABS dummy flushset, individually boxed $31.00 $39.00
Kitted OptionsMODELS & FINISHES GRAY 335
4413 Grip pull for use with 4189, 4190 $24.00
4453-02 Grip pull for use with 4430, 4431 $37.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. LOCKSET EXTERIOR LOCK FACE STILE THICKNESS KEYING OPTIONS PACKAGING
44 31 -09 -05 -01 -IB30 Without Cylinder 00 Without Lock 00 1" to 1-5/16" 00 Without Cylinder IB Individually Boxed
31 With Cylinder 09 Radius 05 1-3/8" to 1-5/8" 01 Keyed Different
32 Dummy 09S Radius Stainless Steel 08 1-3/4" to 2" 02 Keyed Alike in Pairs
10 Square
10S Square Stainless Steel
5017 Wood Door Deadlock/DeadlatchMODELS & FINISH 630
5017-00 Stainless steel deadlock $68.00
5017-02 Self-latching deadlock $68.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. LATCH CONFIGURATION
5017 -0000 Standard
02 Self Latching
5500 Wood Door Deadlock for Sliding Doors MODELS 626
5500-20-626 Lockset, strike and trim included for 1-1/4” thick sliding wood doors $134.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. DOOR THICKNESS FINISH
5500 -20 -62620 1-1/4" Thick 626 Satin Chrome
DEADLOCKS
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
16 DEADLATCHES
DEADLATCHES
4300 Steel Hawk® Electrified Deadlatch (eLatch)MODELS & FINISHES 313, 335, 628
4300 31/32", 1-1/8", or 1-1/2" backset $483.00
4300-M Monitored option, 31/32”, 1-1/8”, or 1-1/2” backset. $547.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. BACKSET MONITORING STRIKE STIRKE SHAPE/LIP LENGTH FACEPLATE FINISH
4300 -3 M -2 01 -6282 31/32" 0 None 1 Surface Mount (4304) 01 Flat/Standard Jamb 313 Dark Bronze Anodized
3 1-1/8" M Monitored 2 Mortised (4901) 4-5/8" 02 Radius/Standard Stiles** 335 Black Anodized
4 1-1/2" 17 Flat/Center Hung 4" Jamb** 628 Clear Anodized
21 Flat/Center Hung 4-1/2" Jamb**
** See ACCESSORIES for available 4901 strike options.
4300 RITE Pack® MODELS
4300-20 31/32" backset, surface mount or mortise strike, 313 and 628 faceplates $467.00
4300-30 1-1/8" backset, surface mount or mortise strike, 313 and 628 faceplates $467.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. BACKSET MONITORING STRIKE RITE PACK
4300 -3 0 -1 RP2 31/32" 0 None 1 Surface Mount (4304)
3 1-1/8" 2 Mortised (4901) 4-5/8"
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
17DEADLATCHES
4510 Standard Duty DeadlatchMODELS & FINISHES 313, 335, 628
4510 Flat faceplate, 7/8", 31/32", 1-1/8", or 1-1/2" backset, strike included $90.00
4511 Radius faceplate, 7/8", 31/32", 1-1/8", or 1-1/2" backset, strike included $90.00
4511W Radius faceplate with weatherstrip, 7/8", 31/32", 1-1/8", or 1-1/2" backset, strike included $90.00
4512 Bevel faceplate, 7/8", 31/32", 1-1/8", or 1-1/2" backset, strike included $90.00
MODEL
4513-IB Without faceplate, without strike $68.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. FACEPLATE BACKSET HANDING STRIKE SIZE STRIKE SHAPE/LIP LENGTH FACEPLATE FINISH
451 1 -3 6 -2 01 -628
0 Flat 1 7/8" 5 LH or RHR 1 Mortised (4901) 4-5/8" 01 Flat/Standard Jamb 313 Dark Bronze Anodized
1 Radius 2 31/32" 6 RH or LHR 2 Mortised (4902) 2-5/8" 02 Radius/Standard Stiles 335 Black Anodized
1W Radius with weatherstrip 3 1-1/8" 17 Flat/Center Hung 4" Jamb 628 Clear Anodized
2 Bevel 4 1-1/2" 21 Flat/Center Hung 4-1/2" Jamb
4530 Standard Duty DeadlatchMODELS & FINISHES 313, 335, 628
4530 Flat faceplate, 7/8", 31/32", or 1-1/8" backset, strike included $112.00
4531 Radius faceplate, 7/8", 31/32", or 1-1/8" backset, strike included $112.00
4532 Bevel faceplate, 7/8", 31/32", or 1-1/8" backset, strike included $112.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. FACEPLATE BACKSET HANDING STRIKE SIZE STRIKE SHAPE/LIP LENGTH FACEPLATE FINISH
453 1 -3 6 -1 01 -6280 Flat 1 7/8" 5 LH or RHR 1 Mortised (4901) 4-5/8" 01 Flat/Standard Jamb 313 Dark Bronze Anodized
1 Radius 2 31/32" 6 RH or LHR 2 Mortised (4902) 2-5/8" 02 Radius/Standard Stiles 335 Black Anodized
2 Bevel 3 1-1/8" 17 Flat/Center Hung 4" Jamb 628 Clear Anodized
21 Flat/Center Hung 4-1/2" Jamb
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
18 DEADLATCHES
4781 Two-Point Deadlatch with PaddleMODEL & FINISHES 313, 335, 628 US26, US26D
4781 Paddle includes dogging feature $369.00 $469.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. OPERATION PADDLE FINISH
4781 T -021 -628T Top rod only 021 Push to LEFT 313 Dark Bronze Anodized US3 Bright Brass
– Standard rod 041 Push to RIGHT 335 Black Anodized US26 Bright Chrome
628 Clear Anodized US26D Satin Chrome
4900 Heavy Duty DeadlatchMODELS & FINISHES 313, 335, 628
4900 Any handing, 31/32", 1-1/8", or 1-1/2" backset $126.00
4911W Radius with weatherseal faceplate, any handing, 31/32", 1-1/8", or 1-1/2" backset $129.00
MODEL
4913-IB Without faceplate or strike $97.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. FACEPLATE BACKSET HANDING STRIKE SIZE STRIKE SHAPE/LIP LENGTH FACEPLATE FINISH
49 00 -3 5 -2 01 -62800 Standard 2 31/32" 5 LH or RHR 1 Mortised (4901) 4-5/8" 01 Flat/Standard Jamb 313 Dark Bronze Anodized
11W Radius with Weatherseal 3 1-1/8" 6 RH or LHR 2 Mortised (4902) 2-5/8" 02 Radius/Standard Stile 335 Black Anodized
4 1-1/2" 17 Flat/Center Hung 4" Jamb 628 Clear Anodized
21 Flat/Center Hung 4-1/2" Jamb
4920AN Heavy Duty Deadlatch (ANSI Size)MODELS & FINISHES 313, 335, 628
4920AN Flat faceplate, 1-1/2” or 2-3/4” backset with 4506 strike $153.00
4920AN Flat faceplate, 1-1/2” or 2-3/4” backset without strike $109.00
MODEL
4923AN-IB Without faceplate or strike $109.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. BACKSET HANDING STRIKE FACEPLATE FINISH
4920AN 4 6 -602 -3134 1-1/2" 5 LH or RHR 000 Less Strike 313 Dark Bronze Anodized
5 2-3/4" 6 RH or LHR 602 4506 Strike 335 Black Anodized
628 Clear Anodized
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
19FLUSHBOLTS & PIVOTS
FLUSHBOLTS & PIVOTS
1870 Cylinder-Operated Flushboltsw 1870 series
MODELS & CYLINDER HEIGHT STANDARD CYLINDER HEIGHT
CYLINDER HEIGHT OVER 12" (SPECIFY)
1870 Flat faceplate, 313, 335, or 628 finish $136.00 $175.00
1871 Radius faceplate, 313, 335, or 628 finish $136.00 $175.00
1871W Radius faceplate with weatherstrip, 313, 335, or 628 finish $139.00 $178.00
1872 Bevel faceplate, 313, 335, or 628 finish $136.00 $175.00
For cylinders over 12” specify cylinder height, 65” maximum. Contact factory for cylinder heights taller than 65”.
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. FACEPLATE SHAPE BACKSET HANDING FINISH
187 0 -2 0 -6280 Flat 2 31/32" 0 Non-Handed* 313 Dark Bronze Anodized
1 Radius 3 1-1/8" 5 LH or RHR 335 Black Anodized
1W Radius with weatherstrip 6 RH or LHR 628 Clear Anodized
2 Bevel
*Any flat or radius faceplate.
1870HM Cylinder-Operated FlushboltMODEL & FINISHES 313, 335, 628
1870HM For hollow metal, 1-1/4" backset $180.00
Cylinder height, 65" maximum. Contact factory for cylinder heights taller than 65”.
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. FACEPLATE SHAPE HANDING FINISH
187 0HM 5 -6280HM Flat 0 Non-Handed* 313 Dark Bronze Anodized
2HM Bevel 5 LH or RHR 335 Black Anodized
6 RH or LHR 628 Clear Anodized
*Any flat or radius faceplate.
1877 Cylinder-Operated FlushboltMODELS & FINISHES 628, 313 605, 626
1877 1-1/4" backset, 13-1/2" cylinder height $231.00 $294.00
1877 1-1/4" backset, cylinder height other than 13-1/2" (maximum cylinder height 57.5") $290.00 $353.00
Maximum cylinder height 57.5”.
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. FINISH
1877 -628313 Dark Bronze Anodized 626 Satin Chrome
605 Bright Brass 628 Clear Anodized
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
20 FLUSHBOLTS & PIVOTS
MS1880, MS1881 Two-Point Flushboltssw ms 1880MODELS & FINISHES 119, 121, 682
MS1880 Hourglass shaped turn $167.00
MS1881 Teardrop shaped turn $167.00
MODEL 119, 121, 682
TDK-1880 Tall door kit for doors over 84". 144" maximum $197.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
MODEL TURN SHAPE CYLINDER HEIGHT* FINISH
MS18 80 -01 -682MS18 80 Hourglass 01 31" to 35" 119 Black
81 Teardrop 02 35-1/16" to 39" 121 Dark Bronze
03 39-1/16" 43" 682 Satin Chrome
04 43-1/16" to 47"
05 47-1/16" to 51"
*Distance from floor to cylinder centerline.
MS2180 Auto-Release Two-Point FlushboltMODELS & FINISHES 119, 121, 130
MS2180 7’, 8’, 9’, 10’ door height $252.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. TURN SHAPE DOOR HEIGHT (FROM FLOOR TO TOP OF DOOR) FINISH TO MATCH
MS218 0 -07 -1300 Hourglass 07 Up to 7' Door 119 Black Anodized
1 Teardrop 08 Up to 8' Door 121 Dark Bronze Anodized
2 Flush 09 Up to 9' Door 130 Clear Anodized
10 Up to 10' Door
B1921, B1923 Reinforcing PivotsMODELS & FINISH US2G
B1921 1/2" to center line of 4" hinge. Pin uses small pin and bushing. $96.00
B1923 3/4" to center line of 4-1/2" hinge. Pin uses large pin and bushing. $81.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. MODEL
B192 11 4"
3 4-1/2"
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
21EXIT DEVICES
EXIT DEVICESAlarmed Exit Device option cannot be combined with Device Options or Monitoring Options.
Split finishes (faceplate/pushbar) are not available.
8099 Dummy PushbarMODELS & FINISHES 313, 335,
628US4,
US32D US3, US32
8099-00 Dummy pushbar without mechanism, for doors NOT requiring an exit device.
$253.00 $538.00 $603.00
8099-M0 Active dummy bar without latching mechanism, without monitoring switches.
$324.00
8099-M1 Active dummy bar without latching mechanism, with switch. Can be wired normally open, or normally closed to operate maglock, alarm or similar.
$399.00 $683.00 $746.00
8099-M2 Active dummy bar without latching mechanism, with two switches. Can be wired normally open or normally closed to operate maglock, alarm or similar.
$474.00 $758.00 $821.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. MONITOR DOOR TYPE PUSHBAR FINISH WIDTH US FINISH
8099 -M1 -3 0 36 -US3200 Inactive Dummy Bar 3 Aluminum 0 US Finish 30 30 inches US3 Bright Brass
M0 Active Dummy Bar, no monitoring switches 4 Wood or hollow metal 1 Clear Anodized 628 36 36 inches US4 Satin Brass
M1 Active Dummy Bar, one monitoring switch 2 Dark Bronze Anodized 313 42 42 inches US32 Bright Stainless
M2 Active Dummy Bar, two monitoring switches 3 Black Anodized 335 48 48 inches US32D Satin Stainless
3100, 8100 Surface Vertical Rod Exit DeviceMODELS & FINISHES 313, 335, 628 US4, US32D US3, US32
8100 Surface vertical rod for wood and hollow metal doors $1,047.00 $1,325.00 $1,590.00
8100T Top rod only $956.00 $1,206.00 $1432.00
3100 Fire-rated surface vertical rod $1,312.00 $1,588.00 $1,662.00
3100T Top rod only for metal doors $1,180.00 $1,429.00 $1,569.00
3100W Top rod only for wood doors $1,238.00 $1,420.00 $1557.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
MODEL PUSHBAR FINISH ROD TYPE DEVICE OPTIONS MONITORING
OPTION
DOOR OPENING WIDTHOn pair of doors, specify HALF
of the total exit openingUS FINISH END CAPS OPTION
FOR US FINISH
81 00 - SE M2 -30 -US32D MEC31 Fire Rated 00 US Finish T Top Rod only LR Electric Latch Retraction M Single Switch 30 30 inches US3 Bright Brass MEC Matching
End Caps81 Life-Safety 11 Clear
Anodized 628W Top Rod only -
Wood doorsSE Silent Electrification Latch Retraction M2 Dual Switch 36 36 inches US4 Satin Brass
22 Dark Bronze Anodized 313 - Standard rod C Cylinder Dogging (non-fire
rated devices ONLY) (Blank) No Monitor 42 42 inches US32 Bright Stainless
33 Black Anodized 335 ED Electric Dogging 48 48 inches US32D Satin Stainless
(Blank) No Option AXXB Alarmed Exit Device where XX is door opening width
* Please note that 30” exit devices cannot accommodate monitoring options, except when ordered in conjunction with the SE option.
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
22 EXIT DEVICES
8200 Narrow Stile Surface Vertical Rod Exit Device MODELS & FINISHES 313, 335, 628 US4, US32D US3, US32
8200 Narrow stile surface vertical rod exit device $985.00 $1,260.00 $1,525.00
8200T Top rod only $896.00 $1,135.00 $1374.00
Kitted OptionsMODEL & FINISHES 313, 335, 628 US4, US32D US3, US32
8055 Tall door kit for doors up to 10' tall, for use with 8100, 8200 $132.00 $171.00 $217.00
MODEL & FINISHES 313, 335, 628 US32D US32
3055 Tall door kit for doors up to 10' tall, for use with 3100 $139.00 $179.00 225.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
MODEL PUSHBAR FINISH ROD TYPE DEVICE OPTIONS MONITORING OPTION
DOOR OPENING WIDTH On pair of doors, specify HALF
of the total exit openingUS FINISH END CAPS OPTION
FOR US FINISH
82 00 - ED M2 -36 -US382 Life-Safety 00 US Finish T Top Rod only LR Electric Latch Retraction M Single Switch 30 30 inches US3 Bright Brass MEC Matching End Caps
11 Clear Anodized 628 - Standard rod SE Silent Electrification Latch Retraction M2 Dual Switch 36 36 inches US4 Satin Brass
22 Dark Bronze Anodized 313 C Cylinder Dogging (Blank)
No Option 42 42 inches US32 Bright Stainless
33 Black Anodized 335 ED Electric Dogging 48 48 inches US32D Satin Stainless
(Blank) No Option AXXB Alarmed Exit Device where XX is door opening width
3300, 8300 Mortise Exit Device MODELS & FINISHES 313, 335, 628 US4, US32D US3, US32
8300 Mortise type exit device $788.00 $1,184.00 $1,234.00
3300 Fire-rated mortise type $1,191.00 $1,404.00 $1509.00
Kitted OptionsMODELS & FINISH US32D
8360-XX Long lip strike, for jambs that project outward 2-1/4" beyond centerline of door, stainless steel, for use with 8300 only
$69.00
4009-01 Open back strike for 1-3/4" thick doors $158.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
MODEL FACEPLATE FINISH
FACE SHAPE DEVICE OPTIONS MONITORING
OPTIONDOOR
HANDINGPUSHBAR
FINISH
DOOR OPENING WIDTH On pair of doors, specify HALF
of the total exit openingUS FINISH END CAPS
OPTION
83 3 0 ED M -7 3 A36B33 Fire Rated 0 US Finish 0 Flat
(3300 only)LR Electric Latch Retraction M Single Switch 7 RHR 0 US Finish 30 30 inches US3 Bright Brass MEC Matching
End Caps
83 Life-Safety 1 Clear Anodized 628
2 Bevel (8300 only)
SE Silent Electrification Latch Retraction M2 Dual Switch 8 LHR 1 Clear
Anodized 628 36 36 inches US4 Satin Brass
2 Dark Bronze Anodized 313
C Cylinder Dogging (non-fire rated devices ONLY)
(Blank) No Monitor
2 Dark Bronze Anodized 313 42 42 inches US32 Bright
Stainless
3 Black Anodized 335 ED Electric Dogging 3 Black
Anodized 335 48 48 inches US32D Satin Stainless
- Without Options AXXB Alarmed Exit Device where XX is door opening width
*Please note that 30” exit devices cannot accommodate monitoring options, except when ordered in conjunction with the SE option.
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
23EXIT DEVICES
8400 Narrow Stile Mortise Exit Device MODEL & FINISHES 313, 335, 628 US4, US32D US3, US32
8400 Mortise type exit device for single leaf $717.00 $1047.00 $1165.00
Kitted OptionsMODELS US32D
8455-01 Long face strike for covering MS strike prep $113.00
8460-17-630 Long lip strike for jambs that project outward 2-1/4" beyond the centerline of door $86.00
91-0995-02 * 2" thick door kit for use with 8300, 8400 $15.00
91-0995-03 * 2-1/4" thick door kit for use with 8300, 8400 $19.00
91-0995-04 * 2-1/2" thick door kit for use with 8300, 8400 $22.00
91-0995-05 * 2-3/4" thick door kit for use with 8300, 8400 $25.00
91-0995-06 * 3" thick door kit for use with 8300, 8400 $27.00
91-0325-01 Thermal door kit, 1/4" cladding, for use with 8400 $91.00
91-0325-02 Thermal door kit, 1/2" cladding, for use with 8400 $166.00
* Order 8360-xx or 8460-xx long lip strike kit separately as required.
HOW TO ORDER Specify quantity and the following information. Order related products separately.
MODEL FACEPLATE FINISH FACE SHAPE DEVICE OPTIONS MONITORING
OPTION BACKSET DOOR HANDING
PUSHBAR FINISH
DOOR OPENING WIDTH On pair of doors, specify HALF
of the total exit openingUS FINISH
END CAPS OPTION FOR
US FINISH
84 1 4 SE M2 -4 7 1 4284 Life-Safety 0 US Finish 0 Flat, Radius,
BevelLR Electric Latch Retraction
M Single Switch 2 31/32" 7 RHR 0 US Finish 30 30 inches US3 Bright
BrassMEC Matching End Caps
1 Clear Anodized 628
4 Radius w/Weatherstrip
SE Silent Electrification Latch Retraction
M2 Dual Switch 3 1-1/8" 8 LHR 1 Clear
Anodized 628 36 36 inches US4 Satin Brass
2 Dark Bronze Anodized 313
C Cylinder Dogging
(Blank) No Monitor 4 1-1/2"
2 Dark Bronze Anodized 313
42 42 inches US32 Bright Stainless
3 Black Anodized 335
ED Electric Dogging
3 Black Anodized 335 48 48 inches
US32D Satin Stainless
- Without Options AXXB Alarmed Exit Device where XX is door opening width
Radius with weatherstrip faceplate is not available in US finishes.
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
24 EXIT DEVICES
3600, 8500 Metal Door Concealed Vertical Rod Exit DeviceMODELS & FINISHES 313, 335, 628 US4, US32D US3, US32
8500 Concealed vertical rod exit device $746.00 $1,078.00 $1,144.00
8500T Top rod only $610.00 $908.00 $933.00
3600 Fire-rated concealed vertical rod $1,257.00 $1,504.00 $1,509.00
3600T Top rod only $1,098.00 $1,335.00 $1,464.00
Kitted Options
MODEL
3655 Tall door kit for doors taller than 66" above bar height, up to 10' $62.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
MODEL PUSHBAR FINISH ROD TYPE DEVICE OPTIONS MONITORING OPTION
DOOR OPENING WIDTH On pair of doors, specify HALF
of the total exit openingUS FINISH
END CAPS OPTION FOR
US FINISH
85 00 T ED M -36 -US32D36 Fire Rated 00 US Finish T Top Rod only LR Electric Latch Retraction M Single Switch 30 30 inches US3 Bright Brass MEC Matching
End Caps
85 Life-Safety 11 Clear Anodized 628 - Standard rod SE Silent Electrification Latch Retraction M2 Dual Switch 36 36 inches US4 Satin Brass
22 Dark Bronze Anodized 313 C Cylinder Dogging (non-fire rated devices only)
(Blank) No Monitor 42 42 inches US32 Bright Stainless
33 Black Anodized 335 ED Electric Dogging 48 48 inches US32D Satin Stainless
(Blank) No Option AXXB Alarmed Exit Device where XX is door opening width
*Please note that 30” exit devices cannot accommodate monitoring options, except when ordered in conjunction with the SE option.
8600 Narrow Stile Concealed Vertical Rod Exit DeviceMODELS & FINISHES 313, 335, 628 US4, US32D US3, US32
8600 Concealed vertical rod exit device $703.00 $1,053.00 $1103.00
8600T Top rod only $597.00 $908.00 $920.00
Kitted OptionsMODEL
8655 Tall door kit for doors up to 10’ for use with 8500, 8600 $59.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
MODEL PUSHBAR FINISH ROD TYPE DEVICE OPTIONS MONITORING OPTION
DOOR OPENING WIDTH On pair of doors, specify HALF
of the total exit openingUS FINISH
END CAPS OPTION FOR
US FINISH
86 22 T SE M2 -3686 Life-Safety 00 US Finish T Top Rod only LR Electric Latch Retraction M Single Switch 30 30 inches US3 Bright Brass MEC Matching
End Caps
11 Clear Anodized 628 - Standard rod SE Silent Electrification Latch Retraction M2 Dual Switch 36 36 inches US4 Satin Brass
22 Dark Bronze Anodized 313 C Cylinder Dogging (Blank)
No Monitor 42 42 inches US32 Bright Stainless
33 Black Anodized 335 ED Electric Dogging 48 48 inches US32D Satin Stainless
(Blank) No Option AXXB Alarmed Exit Device where XX is door opening width
Revised - August 1, 2016
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
25EXIT DEVICES
3700, 8700 Rim Exit DeviceMODELS & FINISHES 313, 335, 628 US4, US32D US3, US32
8700 Rim type exit device $517.00 $804.00 $924.00
3700 Fire-rated rim type $875.00 $1,089.00 $1,205.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
MODEL PUSHBAR FINISH DEVICE OPTIONS MONITORING OPTION
DOOR OPENING WIDTH On pair of doors, specify HALF
of the total exit openingUS FINISH
END CAPS OPTION FOR
US FINISHVOLTAGE
37 00 EL M1 -36 -US3 MEC -1237 Fire Rated 00 US Finish EL Electric Latch Retraction
(indicate 12V/24V) M Single Switch 30 30 inches US3 Bright Brass MEC Matching End Caps 12 Volts
87 Life-Safety 01 Clear Anodized 628 SE Silent Electrification Latch Retraction M2 Dual Switch 36 36 inches US4 Satin Brass 24 Volts
02 Dark Bronze Anodized 313 C Cylinder Dogging (Blank) No Monitor 42 42 inches US32 Bright Stainless
(For EL Option Only)
03 Black Anodized 335 ED Electric Dogging 48 48 inches US32D Satin Stainless
- Without Options AXXB Alarmed Exit Device where XX is door opening width
*Please note that 30” exit devices cannot accommodate monitoring options, except when ordered in conjunction with the SE option.
8800 Narrow Stile Rim Exit DeviceMODEL & FINISHES 313, 335, 628 US4, US32D US3, US32
8800 Rim type exit device $498.00 $775.00 $829.00
Kitted OptionsMODELS N/A 313, 628
3889-08 Mullion for doors up to 8' for use with 8700, 3700 $474.00
3889-10 Mullion for doors up to 10' for use with 8700, 3700 $527.00
3890-08 Aluminum mullion for doors up to 8' for use with 8800 $662.00
3890-10 Aluminum mullion for doors up to 10' for use with 8800 $690.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
MODEL PUSHBAR FINISH DEVICE OPTIONS MONITORING OPTION
DOOR OPENING WIDTH On pair of doors, specify HALF of
the total exit openingUS FINISH
END CAPS OPTION FOR
US FINISHVOLTAGE
88 01 C M2 -36 -1288 Life-Safety 00 US Finish EL Electric Latch Retraction
(indicate 12V/24V) M Single Switch 30 30 inches US3 Bright Brass MEC Matching End Caps 12 Volts
01 Clear Anodized 628 SE Silent Electrification Latch Retraction M2 Dual Switch 36 36 inches US4 Satin Brass 24 Volts
02 Dark Bronze Anodized 313 C Cylinder Dogging (Blank) No Monitor 42 42 inches US32 Bright Stainless(For EL Option Only)
03 Black Anodized 335 ED Electric Dogging 48 48 inches US32D Satin Stainless
- Without Options AXXB Alarmed Exit Device where XX is door opening width
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
26 EXIT DEVICES
3900, 8900 Wood Door Concealed Vertical Rod Exit DeviceMODELS & FINISHES 313, 335, 628 US4, US32D US3, US32
8900 Wood door concealed vertical rod exit device $807.00 $1,171.00 $1,255.00
3900 Fire-rated wood door concealed vertical rod $1,335.00 $1,556.00 $1,773.00
Kitted OptionsMODEL
8955-01 Tall door kit for doors up to 10’ for use with 8900 $62.00
3955-01 Tall door kit for doors up to 10’ for use with 3900 $62.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
MODEL PUSHBAR FINISH ROD TYPE DEVICE OPTIONS MONITORING OPTION
DOOR OPENING WIDTH On pair of doors, specify HALF
of the total exit openingUS FINISH
END CAPS OPTION FOR
US FINISH
89 00 W LR M2 -36 -US3239 Fire Rated 00 US Finish W Top Rod Wood LR Electric Latch Retraction M Single Switch 30 30 inches US3 Bright Brass MEC Matching
End Caps
89 Life-Safety 11 Clear Anodized 628 - Standard rod SE Silent Electrification Latch Retraction M2 Dual Switch 36 36 inches US4 Satin Brass
22 Dark Bronze Anodized 313 C Cylinder Dogging (non-fire rated devices only) (Blank) No Monitor 42 42 inches US32 Bright Stainless
33 Black Anodized 335 ED Electric Dogging 48 48 inches US32D Satin Stainless
(Blank) No Option AXXB Alarmed Exit Device where XX is door opening width
*Please note that 30” exit devices cannot accommodate monitoring options, except when ordered in conjunction with the SE option.
ACCESSORIES FOR EXIT DEVICESOPTIONS & FINISHES N/A US4, US32D US3, US32
SE Silent electrification motorized latch retraction $743.00
EL Electric latch retraction for use with 3700, 8700, 8800 rim exit devices $423.00
ELD Electric latch retraction with mechanical dogging for rim exit devices only $485.00
LR Electric latch retraction $652.00
ALARM Battery-operated alarmed exit device $556.00
M1 Request to exit - monitor/single signal switch $145.00
M2 Request to exit - monitor/double signal switch $219.00
C Cylinder dogging $59.00
ED Electric dogging $496.00
MEC Matching end caps $90.00 $112.00
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
27EXIT DEVICES • ELECTRIC STRIKES
KITTED OPTIONS FOR EXIT DEVICESMODELS & FINISHES N/A 313, 335,
628US4,
US32DUS3, US32
US26D, US3
ALARM EXIT KIT Kit for retrofitting an alarm function to an existing Adams Rite exit device. Includes new pushbar, end caps and installation hardware.
$681.00 $935.00 $985.00
91-0897-01 Single signal switch kit, retrofits to 3000/8000 $121.00
91-0897-02 Double signal switch kit, retrofits to 3000/8000 $191.00
26-0584-XXX-MP Sex bolts, 2 per bag, 2 kits required per exit device $15.00
MODIFICATION OPTIONS FOR EXIT DEVICESMODELS
THICK DOOR For doors thicker than 1-3/4" and/or door skins plus reinforcement thicker than those specified in the Adams Rite Master Reinforcement Sheet template, for CVR and mortise devices
$68.00
UNIQUE DOOR Cutting charges for non-standard lengths between 30" and 48" $86.00
NOTE: Thick door modification options are available for 8300, 8400, and 8600 model exit devices only.
ELECTRIC STRIKES
7100, 7101 Electric StrikesMODELS & FINISHES 313, 335, 628 626
es 7100
7100 For aluminum jambs $218.00 $247.00
7101 For radius aluminum stiles $218.00
7100-XX7, OR -XX9 Monitoring signal switches $325.00 $354.00
Lip Extensions up to 3” for center-hung or non-flush doors add $39.
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO.
FACEPLATE SHAPE VOLTAGE CURRENT
AND DUTY FEATURES* FINISH** LIP EXTENSIONS (DIM. A)(Door Centerline to Jamb Edge)
710 0 -3 1 0 -628 -00
0 Flat 3 12 Volt 1 DC Continuous or Intermittent 0 Standard/Fail-Secure 313 Dark Bronze
Anodized 00 1-1/16" or less 05 2"
1 Radius 5 24 Volt 4 AC Intermittent 5 Fail-Safe 335 Black Anodized 01 1-1/2" 07 2-1/4"
7 Monitored/ Fail-Safe 626 Satin Chrome 02 1-5/8" 09 2-1/2"
9 Monitored/ Fail-Secure 628 Clear Anodized 03 1-3/4" 12 2-7/8"
*Fail-secure can be field converted to fail-safe or vice-versa. **7101 available in 628, 313, 335 only.
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
28 ELECTRIC STRIKES
7110, 7111 Electric StrikesMODELS & FINISHES 652
7110 For wood jambs $257.00
7111 For wood jambs, long faceplate $257.00
7110-XX7, OR -XX9 Monitoring signal switches $364.00
Lip Extensions up to 3” for center-hung or non-flush doors add $39.
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO.
FACEPLATE LENGTH VOLTAGE CURRENT
AND DUTY FEATURES* FINISH LIP EXTENSIONS (DIM. A)(Door Centerline to Jamb Edge)
711 0 -3 1 0 -652 -00
0 7-15/16" 3 12 Volt 1 DC Continuous or Intermittent 0 Standard/Fail-Secure 652 Satin Chrome 00 1-1/16" or less 05 2"
1 10-1/4" 5 24 Volt 4 AC Intermittent 5 Fail-Safe 01 1-1/2" 07 2-1/4"
7 Monitored/ Fail-Safe 02 1-5/8" 09 2-1/2"
9 Monitored/ Fail-Secure 03 1-3/4" 12 2-7/8"
*Fail-secure can be field converted to fail-safe or vice-versa.
7130, 7131 Electric StrikesMODELS & FINISHES 313, 335, 628
7130 For aluminum jambs, pre-cut for MS lock strike $224.00
7131 For radius aluminum stiles, pre-cut for MS lock strike $224.00
Lip Extensions up to 3” for center-hung or non-flush doors add $39.
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO.
FACEPLATE LENGTH VOLTAGE CURRENT
AND DUTY FEATURES* FINISH LIP EXTENSIONS (DIM. A)(Door Centerline to Jamb Edge)
713 0 -3 1 0 -313 -00
0 Flat 3 12 Volt 1 DC Continuous or Intermittent 0 Standard/Fail-Secure 313 Dark Bronze
Anodized 00 1-1/16" or less 05 2"
1 Radius 5 24 Volt 4 AC Intermittent 5 Fail-Safe 335 Black Anodized 01 1-1/2" 07 2-1/4"
628 Clear Anodized 02 1-5/8" 09 2-1/2"
03 1-3/4" 12 2-7/8"
*Fail-secure can be field converted to fail-safe or vice-versa.
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
29ELECTRIC STRIKES
7140 Electric Strike
FITS STANDARDMOUNTING
TAB ANSI PREP
3/32"2.4mm
MODEL & FINISHES 313, 335, 628 626
7140 ANSI size for hollow metal and wood jambs $218.00 $247.00
Lip Extensions up to 3” for center-hung or non-flush doors add $39.
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. VOLTAGE CURRENT AND DUTY FEATURES* FINISH LIP EXTENSIONS (DIM. A)
(Door Centerline to Jamb Edge)
7140 -3 1 0 -628 -003 12 Volt 1 DC Continuous or Intermittent 0 Standard/Fail-Secure 313 Dark Bronze Anodized 00 1-1/16" or less 05 2"
5 24 Volt 4 AC Intermittent 5 Fail-Safe 335 Black Anodized 50 1-3/8" 07 2-1/4"
626 Satin Chrome 01 1-1/2" 09 2-1/2"
628 Clear Anodized 02 1-5/8" 12 2-7/8"
03 1-3/4"
*Fail-secure can be field converted to fail-safe or vice-versa.
7160 Electric StrikeMODELS & FINISHES 313, 335, 628 626
7160 For aluminum jambs $271.00 $300.00
7160-XX7 OR -XX9 Monitoring signal switches $378.00 $407.00
Lip Extensions up to 3” for center-hung or non-flush doors add $39.
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. VOLTAGE CURRENT AND DUTY FEATURES* FINISH LIP EXTENSIONS (DIM. A)
(Door Centerline to Jamb Edge)
7160 -3 1 0 -628 -003 12 Volt 1 DC Continuous or Intermittent 0 Standard/Fail-Secure 313 Dark Bronze Anodized 00 1-1/16" or less 05 2"
5 24 Volt 4 AC Intermittent 5 Fail-Safe 335 Black Anodized 01 1-1/2" 07 2-1/4"
7 Monitor/Fail-Safe 626 Satin Chrome 02 1-5/8" 09 2-1/2"
9 Monitor/Fail-Secure 628 Clear Anodized 03 1-3/4" 12 2-7/8"
*Fail-secure can be field converted to fail-safe or vice-versa.
7170 Electric Strike
FITS STANDARDMOUNTING
TAB ANSI PREP
3/32"2.4mm
MODELS & FINISHES 313, 335, 628 626
7170 For hollow metal and wood jambs $271.00 $300.00
7170-XX7 OR -XX9 Monitoring signal switches $378.00 $407.00
Lip Extensions up to 3” for center-hung or non-flush doors add $39
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. VOLTAGE CURRENT AND DUTY FEATURES* FINISH LIP EXTENSIONS (DIM. A)
Door Centerline to Jamb Edge
7170 -3 1 0 -628 -003 12 Volt 1 DC Continuous or Intermittent 0 Standard/Fail-Secure 313 Dark Bronze Anodized 00 1-1/16" or less 05 2"
5 24 Volt 4 AC Intermittent 5 Fail-Safe 335 Black Anodized 50 1-3/8" 07 2-1/4"
7 Monitor/Fail-Safe 626 Satin Chrome 01 1-1/2" 09 2-1/2"
9 Monitor/Fail-Secure 628 Clear Anodized 02 1-5/8" 12 2-7/8"
03 1-3/4"
*Fail-secure can be field converted to fail-safe or vice-versa.
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
30 ELECTRIC STRIKES
7100 Series Electric Strike ComponentsSTRIKE BODY KITS
7103A-XXX $166.00
7173A-XXX $215.00
One strike body kit matched with one faceplate kit makes a complete electric strike.
FACEPLATE KITS & FINISHES 313,335, 628 US26D US3
FPK00 For use with body kits: 7103A, 7173A $33.00 $56.00 $59.00
FPK01 For use with body kit: 7103A $33.00
FPK10 For use with body kit: 7103A $71.00 $97.00
FPK11 For use with body kits: 7103A, 7173A $75.00 $102.00
FPK30 For use with body kit: 7103A $38.00
FPK31 For use with body kits: 7103A, 7173A $35.00
FPK40 For use with body kit: 7103A $33.00 $56.00 $59.00
FPK45 For use with body kit: 7103A, for installing electric strike in previous prep, 4901, 4501 strike cover.
$38.00
Faceplate kits contain all hardware to mount electric strike.
KITTED OPTIONS
91-0171-01 through -13 Lip extension kits for use with 7100 through 7140 $39.00
91-0171-50 Lip extension kits for use with 7100 through 7140 interior framing systems $39.00
91-0172-01 through -13 Lip extension kits for use with 7160 and 7170 $39.00
91-0172-50 Lip extension kits for use with 7160 and 7170 interior framing systems $39.00
7100 LIP EXTENSION
LIP EXTENSION PART NUMBER APPLICABLE ELECTRIC STRIKES
91-0171-01 through -13 7100, 7110, 7111, 7130, 7140
91-0172-01 through -13 7160, 7170
91-0173-01 through -13 7108, 7128
7100 LIP EXTENSION DIMENSIONS
DASH PART NUMBER
DIMENSION ‘A’ – DOOR CENTERLINE TO JAMB EDGE
DASH PART NUMBER
DIMENSION ‘A’ – DOOR CENTERLINE TO JAMB EDGE
DASH PART NUMBER
DIMENSION ‘A’ – DOOR CENTERLINE TO JAMB EDGE
-00 1-1/16” -05 2” -10 2-5/8”
-01 1-1/2” -06 2-1/8” -11 2-3/4”
-02 1-5/8” -07 2-1/4” -12 2-7/8”
-03 1-3/4” -08 2-3/8” -13 3”
-04 1-7/8” -09 2-1/2”
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
31
ARM-014-01/14
ELECTRIC STRIKES
7240 Series Fire-Rated Electric StrikesMODELS & FINISH 630
7240 Fire-rated, for cylindrical latches $401.00
7240-50 Lip extension for interior frame systems $440.00
7240-XX9 Monitoring signal switches $508.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. VOLTAGE CURRENT AND DUTY FEATURES FINISH
LIP EXTENSIONS (DIM. A)Door Centerline to Jam Edge
for Interior Frames
7240 -3 1 0 -630 -503 12 Volt 1 DC Continuous or Intermittent 0 Fail-Secure* 630 Satin Stainless 00 1-1/16" or less
5 24 Volt 4 AC Intermittent 9 Monitor/Fail-Secure 50 1-3/8"
*Not available fail-safe.
7270 Series Fire-Rated Electric StrikesMODELS & FINISH 630
7270 Fire-rated, for mortise latches $456.00
7270-50 Lip extension for interior frame systems $495.00
7270-XX9 Monitoring signal switches $563.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. VOLTAGE CURRENT AND DUTY FEATURES FINISH
LIP EXTENSIONS (DIM. A)Door Centerline to Jam Edge
for Interior Frames
7270 -3 1 0 -630 -503 12 Volt 1 DC Continuous or Intermittent 0 Fail-Secure* 630 Satin Stainless 00 1-1/16" or less
5 24 Volt 4 AC Intermittent 9 Monitor/Fail-Secure 50 1-3/8"
*Not available fail-safe.
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
32 ELECTRIC STRIKES
7400, 7401 Ultraline Electric StrikesMODELS & FINISHES 313, 335, 628 630 606 605, 629 119, 121, 130
7400 For radius jambs $282.00 $313.00 $313.00 $316.00
7400-M Monitoring signal switches $411.00 $442.00 $442.00 $445.00
7401 For radius aluminum stiles $282.00
7401-M Monitoring signal switches $411.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO.
FACEPLATE SHAPE FEATURES FINISH
740 0 M 6280 Flat - None 7400 ONLY 7401 ONLY
1 Radius M Monitored 313 Dark Bronze Anodized 628 Clear Anodized 119 To match 335 Black Anodized
A Modular Pack - Body Kit* 335 Black Anodized 629 Bright Stainless 121 To match 313 Dark Bronze Anodized
605 Bright Brass 630 Satin Stainless 130 To match 628 Clear Anodized
606 Satin Brass
Fail-secure can be field converted to fail-safe or vice-versa. *Modular Packing Program - match body kit with faceplate kit to complete. Use 7400A for standard jambs and 7401A for radius stile mounting. No finish designation required.
7410, 7411 Ultraline Electric StrikesMODELS & FINISHES 313, 335, 628 630
7410 For wood jambs, 7-15/16" faceplate $313.00 $346.00
7410-M Monitoring signal switches $442.00 $475.00
7411 For wood jambs, 10-1/4" faceplate $325.00 $346.00
7411-M Monitoring signal switches $454.00 $475.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. FACEPLATE LENGTH FEATURES FINISH
741 0 - 6280 7-15/16" - None 313 Dark Bronze Anodized 628 Clear Anodized
1 10-1/4" M Monitored 335 Black Anodized 630 Satin Stainless
Fail-secure can be field converted to fail-safe or vice-versa.
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
33ELECTRIC STRIKES
7430, 7431 Ultraline Electric StrikesMODELS & FINISHES 313, 335, 628 119, 121, 130
7430 For aluminum jambs, flat faceplate $289.00
7430-M Monitoring signal switches $418.00
7431 For aluminum stiles, radius faceplate $289.00
7431-M Monitoring signal switches. Not available in 119 finish. $418.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. FACEPLATE SHAPE FEATURES FINISH
743 0 M 6280 Flat - None 313 Dark Bronze Anodized 119 To match 335 Black Anodized
1 Radius M Monitored 335 Black Anodized 121 To match 313 Dark Bronze Anodized
628 Clear Anodized 130 To match 628 Clear Anodized
Fail-secure can be field converted to fail-safe or vice-versa.
7440 Ultraline Electric StrikesMODELS & FINISHES 313, 335, 628 630 606 605, 629
7440 For steel and wood, jambs and doors $282.00 $313.00 $313.00 $316.00
7440-M Monitoring signal switches $411.00 $442.00 $442.00 $445.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. FEATURES FINISH
7440 M 628- None 313 Dark Bronze Anodized 606 Satin Brass 629 Bright Stainless
M Monitored 335 Black Anodized 628 Clear Anodized 630 Satin Stainless
605 Bright Brass
Fail-secure can be field converted to fail-safe or vice-versa.
74R1 Ultraline Electric StrikesMODELS & FINISHES 119, 121, 130
74R1 For use with rim type exit devices with 3/4" latchbolt $382.00
74R1-M Monitoring signal switches $511.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. FEATURES FINISH
74R1 M -130- None 119 To match 335 Black Anodized
M Monitored 121 To match 313 Dark Bronze Anodized
130 To match 628 Clear Anodized
Fail-secure can be field converted to fail-safe or vice-versa.
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
34
74R2 Ultraline Electric StrikeMODELS & FINISHES 119, 121, 130
74R2 For use with narrow stile rim type exit devices with 1/2" latchbolt $382.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. FINISH
74R2 -130119 To match 335 Black Anodized
121 To match 313 Dark Bronze Anodized
130 To match 628 Clear Anodized
7400 Series Electric Strike ComponentsSTRIKE BODY KITS
7400A Standard body, for use with faceplate kits: FPK7400, FPK7410, FPK7411, FPK7430, FPK7440, FPK7445 $254.00
7401A Radius body, for use with faceplate kits: FPK7401, FPK7431 $254.00
Match one strike body kit with one faceplate kit to make a complete electric strike.
FACEPLATE KITS & FINISHES 313, 335, 628 630 606 605, 629 119, 121,130
FPK7400 For use with body kit: 7400A $28.00 $59.00 $59.00 $64.00
FPK7401 For use with body kit: 7401A $28.00
FPK7410 For use with body kit: 7400A $59.00 $92.00
FPK7411 For use with body kit: 7400A $72.00 $106.00
FPK7430 For use with body kit: 7400A $37.00
FPK7431 For use with body kit: 7401A $37.00
FPK7440 For use with body kit: 7400A $28.00 $59.00 $59.00 $64.00
FPK7445 For use with body kit:7400A $41.00
Faceplate kits contain all hardware to mount electric strike.
KITTED OPTIONS
LEK7400-01 Lip extension kits for use with 7400 series electric strikes $50.00
VA7400-16VDC 16V DC adapter kit required for all 7400 strikes when applying 16VDC $22.00
WDC7400 Wood door cover plate for use when mounting 7400 in the inactive leaf of a wood door pair (to simplify the mortising operation)
$14.00
ELX ElectroLynx™ Adapter to connect Adams Rite products to the ElectroLynx system $36.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. LIP EXTENSIONS (distance from vertical centerline of the door in the closed position to the edge of the jamb)
LEK7400- -0001 1-1/2" 03 1-3/4" 05 2" 07 2-1/4" 09 2-1/2” 11 2-3/4" 13 3"
02 1-5/8" 04 1-7/8" 06 2-1/8" 08 2-3/8" 10 2-5/8" 12 2-7/8" 50 1-3/8"
ELECTRIC STRIKES
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
35
TRIM
1000 Series TurnsMODELS & FINISHES 119, 121, 130
1000-01 OR -02 Turn for use with MS1847 deadlock $25.00
1000-11 OR -21 Turn and escutcheon for use with MS1847 deadlock $30.00
1004 Turn for use with 5015, 5017 deadlock $36.00
1015 Turn for use with 5015, 5017 deadlock $36.00
1016 Outside escutcheon $29.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. TURN TYPE SPINDLE LENGTH FINISH
1000 -21 -14 -130TURN WITHOUT ESCUTCHEON
Furnished Unassembled
DASH CHART
NO. "L" MM NO. "L" MM
-11 17/32 13 -22 1-15/64 31-12 39/64 15 -23 1-19/64 33-13 43/64 17 -24 1-23/64 35-14 47/64 19 -25 1-27/64 36-15 51/64 20 -26 1-31/64 38-16 55/64 22 -27 1-33/64 39-17 59/64 23 -28 1-39/64 41-18 63/64 25 -29 1-43/64 42-19 1-3/64 26 -30 1-47/64 44-20 1-7/64 28 -31 1-51/64 46-21 1-11/64 30 -32 1-55/64 47
119 To match 335 Black Anodized
-01 Parallel Drive
-02 Pendicular Drive 121 To match 313 Dark Bronze Anodized
TURN WITH ESCUTCHEON Furnished Assembled 130 To match 628 Clear Anodized
-11 Parallel Drive
-21 Pendicular Drive
3000 Fixed PullMODELS & FINISH US32D
3001 Tubular fixed pull $226.00
3002 Flat fixed pull $245.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. HANDLE CYLINDER HOLE EXIT DEVICE FINISH
300 1 -1 1 -US32D1 Round 1 Without Hole 1 Mortise, Rim US32D Satin Stainless
2 Flat 2 With Hole 2 CVR
3 SVR
Not for use with the following exit devices: 8200, 8400, 8600, 8800.
TRIM
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
36 TRIM
3080 Series Entry TrimELECTRIFIED TRIM
MODELS & FINISHES US32D, US10B
US4, US3, US32
US32D, US10B
US4, US3, US32
3080 Entry trim with standard series lever (01, 02, 03) $393.00 $405.00 $770.00 $782.00
3080-M Matching trim cover finish, plated $503.00 $515.00 $880.00 $892.00
3080-U Universal trim kit includes tailpieces and trimplates for use with all Adams Rite exit devices
$423.00 $435.00 $800.00 $812.00
3080-MX Entry trim with designer series levers (MX) $418.00 $430.00 $795.00 $807.00
Tactile strip available on inside of standard series levers 01 and 03, add $48.
KITTED OPTIONS
91-0686 Adaptor kit for 3080 trim and G86 exit device $32.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. ELECTRIFIED HANDLE HANDING CYLINDER
HOLE EXIT DEVICE VOLTAGE FEATURES TRIM COVER FINISH FINISH
3080 E -01 -0 -3 7 -3 0 M US32D(blank) Standard
STANDARD HANDLES 0 No Handing 3 With Hole 1 SVR ELECTRIFIED
TRIM ONLY ELECTRIFIED
TRIM ONLY - Standard (Black) US3 Bright Brass
E Electrified Trim 01 Curve 7 Right Hand* 9 Without Hole 3 Mortise 3 12 Volt DC 0 Fail-Secure M Matching Finish US4 Satin Brass
02 Round 8 Left Hand* 4 SCVR 5 24 Volt DC 5 Fail-Safe US10B Oil-Rubbed Bronze
03 Square 6 CVR US32 Bright Stainless
DESIGNER SERIES 7 Rim US32D Satin Stainless
MD MJ U Universal Kit
ME MN* (Handed)
MG MV* (Handed)
MI MW
*Handing must be specified for MN and MV Designer Handles.
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
37
ARM-014-01/14
TRIM
3090, 3090P/C eForce® Keyless EntryKEYPAD PROX ICLASS
MODELS & FINISHES 626, 121 626, 121 626, 121
For Adams Rite latches or 8000 Series Exit Devices, Yale 7200 series, Corbin Russwin ED4000 series exit devices only
3090-01 3090P-01 3090C-01
$703.00 $997.00 $1,063.00
For Adams Rite MS® deadlocks 3090-02 3090P-02 3090C-02
$717.00 $1,013.00 $1,076.00
Kitted OptionsMODELS
RSK-3090 Remote switch input connector $14.00
3090-CABLE 15 ft cable extension (ElectroLynx™ x pigtail) for 3090P/C $37.00
3090-CABLE-EL 15 ft cable extension (ElectroLynx™ x ElectroLynx™) for 3090P/C $43.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. COMPATIBLE PRODUCTS FINISH
3090 -01 -62601 Adams Rite latches or 8000 Series Exit Devices, Yale 7200 series, Corbin
Russwin ED4000 series exit devices only 121 To match 313 Dark Bronze Anodized
02 Adams Rite MS® deadlocks 626 Satin Chrome
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. CREDENTIAL COMPATIBLE PRODUCTS FINISH
3090 P -01 -626
P 125 kHz HID® Prox 01 Adams Rite latches or 8000 Series Exit Devices, Yale 7200 series, Corbin Russwin ED4000 series exit devices only
121 To match 313 Dark Bronze Anodized
C 13.56 MHz HID iCLASS 02 Adams Rite MS® deadlocks 626 Satin Chrome
A100-3090H Keyless Entry and Aperio® Hub Wholesale KitFOR DEADLATCHES FOR DEADLOCKS
MODELS & FINISHES 121, 626 121, 626
A100-3090H-C Keyless entry paired with hub, iCLASS reader $1,987.00 $2012.00
A100-3090H-P Keyless entry paired with hub, PROX reader $1,987.00 $2012.00
Special pricing program discounts apply to Aperio products. Please contact your sales representative for pricing information.
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. CREDENTIAL COMPATIBLE PRODUCTS FINISH
A100-3090H -C -1 -626
P 125 kHz HID® Prox1 Adams Rite latches or 8000 Series Exit Devices, Yale 7200
series, Corbin Russwin ED4000 series exit devices only (select REX enabled version).
121 To match 313 Dark Bronze Anodized
C 13.56 MHz HID iCLASS 2 Adams Rite MS® deadlocks 626 Satin Chrome
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
38
4060 TurnMODEL & FINISH 130
4060 Turn for 1875 deadlock, 1-1/2", 1-3/4", or 2" door thickness $69.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. DOOR THICKNESS FINISH
4060 -05 -13005 1-1/2” 130 To match 628 Clear Anodized
06 1-3/4”
07 2”
NOTE: Contact factory regarding mounting spacers, bolts, guides and strikes for a particular door design.
4550 MS® Deadlock LeverMODEL & DOOR THICKNESS 1-3/4" TO 2-1/16" 2-1/16" TO 2-3/8"
4550 Deadlock lever, 119, 121, or 130 finish $226.00 $269.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. DOOR HAND* DOOR THICKNESS RITECOAT FINISH
4550 R -01 -130R RH or RHR 01 1-3/4" to 2" 119 To match 335 Black Anodized
L LH or LHR 02 2-1/8" to 2-3/8" 121 To match 313 Dark Bronze Anodized
130 To match 628 Clear Anodized
*Regardless of swing.
4560, 4565 Series Deadlatch Handles for 4300, 4500, 4900MODELS & FINISHES 119, 121, 130
4560-X01 For door thickness (01) 1-3/4" to 2" $58.00
4560-X02 For door thickness (02) 2-1/4" to 2-1/2" $84.00
4560-X03 For door thickness (03) 2-3/4" to 3" $84.00
4560-X04 For door thickness (04) 3-1/4" $84.00
4565-X01 For door thickness (01) 1-3/4" to 2" $58.00
4565-X02 For door thickness (02) 2-1/4" to 2-1/2" $84.00
4565-X03 For door thickness (03) 2-3/4" to 3" $84.00
4565-X04 For door thickness (04) 3-1/4" $84.00
TRIM
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
39
4560-010, 4565-010 Series Deadlatch Handles for MS+1890
MODELS & FINISHES 119, 121, 130
4560-011 For door thickness (11) 1-3/4" $58.00
4560-012 For door thickness (12) 1-3/4" to 2-1/4" $58.00
4560-013 For door thickness (13) 2-15/16" to 2-3/4" $58.00
4565-011 For door thickness (11) 1-3/4" $58.00
4565-012 For door thickness (12) 1-3/4" to 2-1/4" $58.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. HANDLE TYPE HANDING DOOR THICKNESS FINISH
456 0 -5 01 -130
0 Lever 0 Using MS+1890 For 4300, 4500, 4900 Series Deadlatches For MS+1890 119 To match 335 Black Anodized
5 Turn 5 LH or LHR 01 1-3/4" to 2" 11 1-3/4" 121 To match 313 Dark Bronze Anodized
6 RH or RHR 02 2-1/4" to 2-1/2" 12 1-3/4" to 2-1/4" 130 To match 628 Clear Anodized
03 2-3/4" to 3" 13 2-5/16" to 2-3/4"
04 3-1/4"
4568, 4569 Eurostyle Deadlatch HandlesMODELS & FINISHES 119, 121, 130
sw 4568
4568-X01 For door thickness (01) 1-3/4" to 2" $72.00
4568-X02 For door thickness (02) 2-1/4" to 2-1/2" $91.00
4568-X03 For door thickness (03) 2-3/4" to 3" $91.00
4568-X04 For door thickness (04) 3-1/4" $91.00
4569-X01 For door thickness (01) 1-3/4" to 2" $82.00
4569-X02 For door thickness (02) 2-1/4" to 2-1/2" $108.00
4569-X03 For door thickness (03) 2-3/4" to 3" $108.00
4569-X04 For door thickness (04) 3-1/4" $108.00
TRIM
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
40
4568-010, 4569-010
Series Deadlatch Handles for MS+1890MODELS & FINISHES 119, 121, 130
4568-011 For door thickness (11) 1-3/4" to 1-15/16" $55.00
4568-012 For door thickness (12) 2" to 2-1/4" $60.00
4568-013 For door thickness (13) 2-15/16" to 2-3/4" $60.00
4568-014 For door thickness (14) 3" $60.00
4569-011 For door thickness (11) 1-3/4" to 1-15/16" $65.00
4569-012 For door thickness (12) 2" to 2-1/4" $70.00
4569-013 For door thickness (13) 2-15/16" to 2-3/4" $70.00
4569-014 For door thickness (14) 3" $70.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. LEVER TYPE HANDING DOOR THICKNESS FINISH
456 8 -5 01 -130
8 Straight 0 Using MS+1890 For 4300, 4500, 4900 Series Deadlatches For MS+1890 119 To match 335 Black Anodized
9 Return End 5 LH or LHR 01 1-3/4" to 2" 11 1-3/4" to 1-15/16" 121 To match 313 Dark Bronze Anodized
6 RH or RHR 02 2-1/4" to 2-1/2" 12 2" to 2-1/4" 130 To match 628 Clear Anodized
03 2-3/4" to 3" 13 2-5/16" to 2-3/4"
04 3-1/4" 14 3”
4590 Deadlatch Paddle for 4300, 4500, 4900MODELS & FINISHES 313, 335, 628
4590-0X-00 For door thickness (00) 1-3/4" $119.00
4590-0X-01 For door thickness (01) 1-13/16" to 2" $145.00
4590-0X-02 For door thickness (02) 2-1/4" to 2-1/2" $145.00
4590-0X-03 For door thickness (03) 2-3/4" to 3" $145.00
4590-0X-04 For door thickness (04) 3-1/4" $145.00
TRIM
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
41
4590-1X Deadlatch Paddle for MS+1890, 2190MODELS & FINISHES 313, 335, 628
4590-1X-00 For door thickness (00) 1-3/4" $103.00
4590-1X-01 For door thickness (01) 1-3/4" to 2-1/4" $124.00
4590-1X-02 For door thickness (02) 2-5/16" to 2-1/2" $124.00
4590-1X-03 For door thickness (03) 2-9/16" to 2-3/4" $124.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. OPERATION DOOR THICKNESS FINISH*
4590 02 -00 -313FIRST DASH
FOR LATCH SERIES OPPERATION USE For 4300, 4500, 4900 Series Deadlatches For MS+1890, 2190 313 Dark Bronze Anodized
-01 4300/4500/4900 PULLTO LEFT
Outside of left hand reverse door or inside of right hand
00 1-3/4" 00 1-3/4" 335 Black Anodized
-11 MS+1890/2190 01 1-13/16" to 2" 01 1-3/4" to 2-1/4" 628 Clear Anodized
-02 4300/4500/4900 PUSH TO LEFT
Outside of left hand door or inside of right hand reverse
02 2-1/4" to 2-1/2" 02 2-5/16" to 2-1/2"
-12 MS+1890/2190 03 2-3/4" to 3" 03 2-9/16" to 2-3/4"
-03 4300/4500/4900 PULLTO RIGHT
Outside of right hand reverse door or inside or left hand
04 3-1/4"
-13 MS+1890/2190
-04 4300/4500/4900 PUSH TO RIGHT
Outside of right hand door or inside of left hand reverse-14 MS+1890/2190
-03 OR -13LH
LHR
RH
RHR
-02 OR -12
-02 OR -12
-03 OR -13
-04 OR -14-01 OR -11
-04 OR -14
-01 OR -11
*Paddle only.
4591 Deadlatch Paddle for 4300, 4500, 4900MODELS & FINISHES 313, 335, 628 US3, US4, US26D
4591-0X-00 For door thickness (00) 1-3/4" $139.00 $139.00
4591-0X-01 For door thickness (01) 1-13/16" to 2" $165.00 $165.00
4591-0X-02 For door thickness (02) 2-1/4" to 2-1/2" $165.00 $165.00
4591-0X-03 For door thickness (03) 2-3/4" to 3" $165.00 $165.00
4591-0X-04 For door thickness (04) 3-1/4" $165.00 $165.00
TRIM
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
42
4591-1X Deadlatch Paddle for MS+1890, 2190MODELS & FINISHES 313, 335, 628 US3, US4, US26D
4591-1X-00 For door thickness (00) 1-3/4" $122.00 $219.00
4591-1X-01 For door thickness (01) 1-3/4" to 2-1/4" $143.00 $240.00
4591-1X-02 For door thickness (02) 2-5/16" to 2-1/2" $143.00 $240.00
4591-1X-03 For door thickness (03) 2-9/16" to 2-3/4" $143.00 $240.00
MODELS
4591MA Active paddle, latch activator with monitor switch Add $143.00
4591M Paddle with switch, no latch activator Add $26.00
91-0914 Monitor switch kit for 4591, field installation $125.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. OPTIONS** OPERATION DOOR THICKNESS FINISH*
4591 M 02 -00 -313
- Standard Paddle FIRST DASH FOR LATCH SERIES OPPERATION USE For 4300, 4500, 4900
Series Deadlatches For MS+1890, 2190 313 Dark Bronze Anodized
M Paddle w/ switch only -01 4300/4500/4900
PULLTO LEFT
Outside of left hand reverse door or inside of right hand
00 1-3/4" 00 1-3/4" 335 Black Anodized
MA Active paddle w/ switch -11 MS+1890/2190 01 1-13/16" to 2" 01 1-3/4" to 2-1/4" 628 Clear Anodized
-02 4300/4500/4900PUSH
TO LEFT
Outside of left hand door or inside of right hand reverse
02 2-1/4" to 2-1/2" 02 2-5/16" to 2-1/2" US3 Bright Brass
-12 MS+1890/2190 03 2-3/4" to 3" 03 2-9/16" to 2-3/4" US26 Bright Chrome
-03 4300/4500/4900PULL
TO RIGHT
Outside of right hand reverse door or inside or left hand
04 3-1/4" US26D Satin Chrome
-13 MS+1890/2190
-04 4300/4500/4900PUSH
TO RIGHT
Outside of right hand door or inside of left hand reverse-14 MS+1890/2190
*Paddle only. **M and MA options availble on push paddles only, not pull paddles.
TRIM
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
43
4600 Heavy Duty Designer Deadlatch HandlesLEVER OPERATOR FOR 4300, 4500, 4900 SERIES
DEADLATCHES
LEVER OPERATOR FOR 2190, 2290 INTERCONNECTED
DEADBOLT/DEADLATCH
MODELS & FINISHES US32D, US10B US3, US4, US32 US32D, US10B US3, US4,
US32
4600 With standard series handle designation (01, 02, 03)
$140.00 $153.00 $121.00 $134.00
4600-DESIGNER HANDLE With designer series handle designation (MD through MW)
$170.00 $183.00 $151.00 $164.00
4600-REX With request to exit form 'C' switch to indicate when lever is actuated
$186.00 $199.00 $167.00 $180.00
4600-THICK DOOR For door thickness greater than 1-7/8"
$162.00 $175.00 $143.00 $156.00
KITTED OPTIONS
4600-REX Request to exit kit $41.00
DTK-4600 Fixed lever (dummy) kit $12.00
TDK-4600-XX Thick door kit. Specify door thickness.* $22.00
TBK-4600-XX Through-bolt mounting kit for back-to-back mounting on wood doors. Specify door thickness.*
$27.00
*(01) 1-3/4",(02) 2", (03) 2-1/4", (04) 2-1/2", (05) 2-3/4".
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. REX HANDLE HANDING** DOOR THICKNESS COMPATIBLE PRODUCTS FINISH
4600 M -01 -5 1 1 -32D(blank) Standard STANDARD HANDLES 5 LH or LHR 1 1-3/4" to 1-7/8" 1 2190, 2290 Interconnected Deadbolt/Deadlatch US3 Bright Brass
M REX Switch Option 01 Curve 6 RH or RHR 2 2" to 2-1/8" 2 4300, 4500, 4900 Series Deadlatches US4 Satin Brass
02 Round 3 2-1/4" to 2-3/8" US10B Oil-Rubbed Bronze
03 Square 4 2-1/2" to 2-5/8" US32 Bright Stainless
DESIGNER SERIES 5 2-3/4" to 2-7/8" US32D Satin Stainless
MD MJ
ME MN* (Handed)
MG MV* (Handed)
MI MW
*MN and MV Designer Handles are not field reversible. **Assuming handle on interior of door.
TRIM
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
44
CYLINDERS
4024, 4025, 4026 Cylinder Pulls
MODELS & FINISHES 119, 121, 130
4024-05 Cylinder pull, Schlage keyway $67.00
4024-06 Cylinder pull, Weiser keyway $67.00
4025-04 Special cylinder pull for Sargent Sixline, requires pull and cylinder modification $256.00
4025-05 Cylinder pull, Schlage keyway $72.00
4025-06 Standard cylinder pull, Weiser keyway $72.00
4025-06, CYL X CYL Cylinder both sides pullset, Weiser keyway $144.00
4025-08 Special cylinder pull for Corbin 471AR, requires pull modification $219.00
4025-09 Special cylinder pull, for Russwin AR848, requires pull modification $207.00
4026-05 Cylinder pull for use with 5015, 5017 deadlock, Schlage keyway $76.00
4026-06 Cylinder pull for use with 5015, 5017 deadlock, Weiser keyway $76.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PULL TYPE PULL NO./CYLINDER INCLUDED FINISH
4024 -05 -1304024 Trim Plate Mounted 05 Schlage "C: Keyway 119 To match 335 Black Anodized
4025 Stile Mounted with through - screws 06 Weiser Keyway 121 To match 313 Dark Bronze Anodized
4026 For Wood Applications 130 To match 628 Clear Anodized
4036 Mortise Cylinder MODEL & FINISHES 313, 335, 628
4036 2 keys and 1/4" ring, KD, KA2 only $45.00
For 3300, 3600, 8300, 8400, 8600, or entry trim. Five pin. Can be installed directly in latch case of 8400, 8300, or 3300.
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. LOCK TYPE KEY OPTIONS FINISH
4036 -01 -01 -62801 For MS Lock, 4900 Deadlatches, 2190, etc. 01 KD 313 Dark Bronze Anodized
02 For 4070 Deadlock 02 KA2 335 Black Anodized
03 For 2331 Deadlock 628 Clear Anodized
CYLINDERS
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
45
MS4043 Cylinder Guard
MODEL & STILE WALL, CYLINDER 1/8" STILE WALL, 5 OR 6 PIN CYLINDER
1/4" STILE WALL, 5 OR 6 PIN CYLINDER
1/8" STILE WALL, 1-5/16" TO 1-7/16" LONG CYLINDER
MS4043 Cylinder guard, 119, 121, or 130 finishes
$42.00 $44.00 $64.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. STILE WALL & CYLINDER FINISH
MS4043 -01 -130STILE WALL CYLINDER 119 To match 335 Black Anodized
00 1/8" 5 or 6 pin 121 To match 313 Dark Bronze Anodized
01 1/4" 5 or 6 pin 130 To match 628 Clear Anodized
02 1/8" 1.31” to 1.435” long
4066 ThumbturnMODEL & FINISHES 130, 313,
335, 628
4066 Thumbturn cylinder with 1/4" ring $51.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. LOCK TYPE FINISH
4066 -01 -13001 For MS Lock, 4900 Deadlatches, 2190, etc 130 To match 628 Clear Anodized
02 For 4070 Deadlock 313 Dark Bronze Anodized
03 For 2331 Deadlock 335 Black Anodized
4580 Cam DiscMODELS
4580 - X00, X01 Included with lever handles, door thickness 2" or less $18.00
4580 - X02, X03 Included with lever handles, door thickness greater than 2" $24.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. HANDING DOOR THICKNESS
4580 -5 005 LH 00 1-3/4"
6 RH 01 2"
02 2-1/4"
03 2-3/4"
CYLINDERS
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
46
4581 Universal Cam DiscMODELS
4581-01 Universal cam disc, non-handed, for 1-3/4" door thickness (included in 4600) $24.00
4581-02 Universal cam disc, non-handed, for 2" door thickness $29.00
4581-03 Universal cam disc, non-handed, for 2-1/4" door thickness $29.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. DOOR THICKNESS
4581 0101 1-3/4"
02 2"
03 2-1/4"
8650 Cylinder Escutcheon KitMODELS & FINISHES 119, 121,
130313, 335,
628US4,
US32D US3, US32
8650 Cylinder escutcheon kit for 3600, 8500, 8600 exit devices $38.00 $69.00 $76.00 $91.00
8650 For wall thickness over 1/8" $79.00 $110.00 $117.00 $132.00
8736 Rim Cylinder MODEL & FINISHES 313, 335, 628
8736 Rim cylinder for use with 3100, 3700, 8100, 8200, 8700, 8800. Five pin. $52.00
Keying Available: Keyed different, or two keyed alike (2).
CYLINDERS
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
47
ACCESSORIES
4014 Two-Point Conversion KitMODEL
4014 Two-point conversion kit for MS1861 Bottom Rail Deadbolt $42.00
4015 Threshold BoltMODEL & CYLINDER HEIGHT STANDARD CYLINDER HEIGHT
OVER 53"
4015-18-IB Two-point converter, threshold bolt, 603 finish, specify cylinder height, 60” maximum
$50.00 $78.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. ADD DASH NUMBER FOR "UNIVERSAL SIZE" PACKAGING
4015 -18 -IBIB Individually Boxed
If ordering in volume quantity for specific cylinder height, specify CYLINDER HEIGHT.
4016 Header BoltMODEL
4016 Three-point converter, provides upper bolt for MS1850/1870 Deadlocks $64.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. LOCK BACKSET DOOR HEIGHT
4016 -30 -0110 1-1/2" 01 7' Door
20 31/32" 02 10' Door
30 1-1/8"
4085 Header Bolt (Pairs of Doors Only)sw 4085 MODEL & DOOR HEIGHT STANDARD DOOR HEIGHT
OVER 84"
4085-IB Positioner bolt and header strike, 603 finish, specify cylinder height and door height, door height 10’ maximum
$96.00 $138.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. DIMENSION 'A' PACKAGING
4085 -02 -IB01 30" - 52" IB Individually Boxed
02 52" - 67"
03 67" - 79"
04 79" - 92"
EXAMPLE
Door Height Cylinder Height A
96" - 40" = 56"
REFERENCE:
7’ Door is 84”8’ Door is 96”9’ Door is 108”10’ Door is 120”
ACCESSORIES
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
48
4089 Exit IndicatorMODELS & FINISHES 119, 121, 130
4089 For 1-3/4" door, includes both UBC and IBC signs $60.00
4089-20 For 2"to 2-1/2" door, includes both UBC and IBC signs $96.00
91-0912 Adapter plate for converting MS1850/4089. Installation to deadlatch and lever handle or paddle. $38.00
ACCESSORIES
20-0255-IP Header sign "…During Business Hours" $8.00
20-0256-IP IBC header sign "…Building is Occupied" $8.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
OPTIONS FINISH
4089 -01 -13000 Standard 1-3/4" Door 119 To match 335 Black Anodized
01 For Inverted Lock 121 To match 313 Dark Bronze Anodized
20 For Doors up to 2-1/2" 130 To match 628 Clear Anodized
Standard unit fits 1-3/4” doors.
4104 Mounting BridgesMODELS
4104-01 Radius mounting bridge $9.00
4104-02 Flat mounting bridge $9.00
4104-03 LH bevel mounting bridge $9.00
4104-04 RH bevel mounting bridge $9.00
91-0965 Universal Mounting Tab Kits for Installing MS® Locks & LatchesMODELS
91-0965 For flat/radius stiles $14.00
91-0966 For beveled stiles, includes tabs for RH and LH bevel doors and mounting screws for clear and dark bronze
$17.00
2190 Dual Force® Interconnected Deadbolt/Deadlatch StrikesMODELS & FINISHES 630 119, 121
2101-01 Standard flat strike with dust box $30.00 $39.00
2101-XX Strike with extended lip, 4.5" only, flat strike. Not available in 119 finish. $49.00 $57.00
2101-02 Standard radius strike with dust box $30.00 $39.00
2102-01 Retrofit strike extended height 7-5/8" with dust box. Not available in 119 finish. $43.00 $52.00
ACCESSORIES
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
49
2290 Dual Force® Interconnected Deadbolt/Deadlatch Strikes MODELS & FINISHES 630 119, 121
2206-01 Standard flat strike with dust box $30.00 $39.00
2206-XX Strike with extended lip, specify dimension from strike centerline to frame face, to 4.5” maximum, flat strike only
$54.00
4000 Series Series MS® Deadlock StrikesMODELS & FINISHES 630 313,
335, 628US3,
US26D 119, 121 626
4000 Trim Strike $15.00
4001 Box Strike $23.00 $50.00
MS4002 Armored Strike $57.00 $84.00
4003 ANSI strike. Not available in 119 finish. $80.00 $72.00
4005 Strike for 4015 Threshold Bolt $22.00
4006 Strike for 1830 Bottom Rail Deadlock $50.00 $55.00
4170 Trim strike for 4070 Short Throw Deadbolt. Not available in 335 finish.
$22.00
4505-01 Flat armored box strike for MS+1891 Deadlock/Deadlatch
$52.00 $59.00
4505-02 Radius armored box strike for MS+1891 Deadlock/Deadlatch
$52.00 $59.00
4505-17 and -21 Flat long lip armored box strike $67.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
STRIKE MODEL TRIM PLATE SHAPE COMPATIBLE DEADLOCK TRIM PLATE
CORNERS FINISH
4001 -0 1 1 -3134000 Trim Strike 0 Flat 1 All Standard MS® locks with 1-3/8" Bolt Throw 1 Square 313 Dark Bronze Anodized
4001 Box Strike 1 Radius 2 1850A-020 with 3/4" Bolt Throw Only 2 Round 335 Black Anodized
MS4002 Armored Strike 3 All MS-050 "Hookbolt" locks 628 Clear Anodized
4800, MS4804 Series StrikesMODELS & FINISHES 630 603
MS4804 Reinforcing strike and screws, two-part with reinforcement for strengthening metal jamb $22.00
4801 Metal strike for MS1847 Deadlock $22.00 $17.00
4802 Wood strike for MS 1847 Deadlock $22.00 $17.00
4810 Box strike for 5017 Wood Door Deadlock/Deadlatch $17.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. TYPE OF JAMB DIMENSION 'A' FINISH PRODUCT NO. FINISH
480 1 -02 -630 MS4804 -6301 Metal 01 3/32" 603 Zinc Plated Steel 630 Satin Stainless
2 Wood 02 3/16" 630 Satin Stainless
03 9/32"
ACCESSORIES
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
50
4901, 4902 Deadlatch Strikes
MODELS & FINISHES 630 119, 121
4901-01 Flush mount strike, mortised with dust box $22.00 $29.00
4901-02 Radius strike with dust box $22.00 $29.00
4901-XX Extended lip strike, specify lip dim 'A', 2.5” maximum* $35.00 $42.00
4902-01 Box strike $22.00 $29.00
4902-02 Short type box strike, radius with dust box, mounting plate $22.00 $29.00
4902-XX Extended lip strike, specify lip dim 'A', 2.5” maximum* $35.00 $42.00
4506 Strike for use with 4920AN $36.00 $43.00
*See dim. ‘A’ dash chart table below.
HOW TO ORDER Specify quantity and the following information. Order related products separately.
PRODUCT NO. STRIKE TYPE FACEPLATE SHAPE FINISH
490 1 -02 630STANDARD LIP 119 To match 335 Black Anodized
1 Long 01 Flat 121 To match 313 Dark Bronze Anodized
2 Short 02 Radius 630 Satin Stainless Steel
LONG LIP FOR CENTER HUNG
DOORDIM. ‘A’
LONG LIP FOR CENTER HUNG
DOORDIM. ‘A’
03 2-1/4" Wide Jamb 1-1/8 13 3-1/2" Wide Jamb 1-3/4
05 2-1/2" Wide Jamb 1-1/4 15 3-3/4" Wide Jamb 1-7/8
07 2-3/4" Wide Jamb 1-3/8 17 4" Wide Jamb 2
09 3" Wide Jamb 1-1/2 19 4-1/4" Wide Jamb 2-1/8
11 3-1/4" Wide Jamb 1-5/8 21 4-1/2" Wide Jamb 2-1/4
4304 Deadlatch StrikeMODELS & FINISHES 630 119, 121
4304 Surface mount strike for 4300 Electrified Deadlatch $22.00 $29.00
THICK DOOR KITS
2190, 2290 Dual Force® Interconnected Deadbolt/Deadlatch Thick Door KitMODELS
2190-TDK-XX Thick door kit for 2190, 2290 standard exterior trim set. Specify door thickness.* $42.00
TDK-4600-XX Thick door kit for 2190, 2290 low profile trim set. Specify door thickness.* $19.00
*(01) 1-3/4", (02) 2", (03) 2-1/4", (04) 2-1/2", (05) 2-3/4", (06) 3", (07) 3-1/4".
ACCESSORIES
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
51
4568, 4569 Eurostyle Deadlatch Handle Thick Door Kits MODELS
91-0128-02, 03, 04 Thick door kits for 4568, 4569 $19.00
26-0203-02, 03, 04 Thick door kits for 4568-11, 4569-11 $5.00
FACEPLATES
MS1850S Deadlock FaceplatesMODELS & FINISHES 313, 628
BFK-MS1850-10-313 OR -628 Blank faceplate kit, flat, 1” x 6-7/8” $25.00
BFK-MS1850-11-313 OR -628 Blank faceplate kit, radius, 1” x 6-7/8” $25.00
MS1850S, MS1950
Deadlock (Long Throw) FaceplatesMODELS & FINISHES 313, 335, 628 US4, US26D US3, US26
24-0384-010 Flat faceplate $6.00 $30.00 $35.00
24-0384-110 Radius faceplate $6.00 $30.00 $35.00
24-0384-210 LH bevel faceplate $6.00 $30.00 $35.00
24-0384-310 RH bevel faceplate $6.00 $30.00 $35.00
24-0384-410 Radius with weatherstrip $6.00
MS1850S, MS1950
Deadlock (Hookbolt and Short Bolt) FaceplatesMODELS & FINISHES 313, 335, 628 US4, US26D US3, US26
24-0384-020 Flat faceplate $6.00 $30.00 $35.00
24-0384-120 Radius faceplate $6.00 $30.00 $35.00
24-0384-220 LH bevel faceplate $6.00 $30.00 $35.00
24-0384-320 RH bevel faceplate $6.00 $30.00 $35.00
24-0384-420 Radius with weatherstrip $6.00
MS1850SN Deadlock (Long Throw) FaceplatesMODELS & FINISHES 313, 335, 628 US4, US26D US3, US26
24-0226-010 Flat faceplate $9.00 $35.00 $37.00
24-0226-110 Radius faceplate $9.00 $35.00 $37.00
24-0226-210 LH bevel faceplate $9.00 $35.00 $37.00
24-0226-310 RH bevel faceplate $9.00 $35.00 $37.00
ACCESSORIES
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
52
MS1850SN Deadlock (Hookbolt) FaceplatesMODELS & FINISHES 313, 335, 628 US4, US26D US3, US26
24-0226-020 Flat faceplate $9.00 $35.00 $37.00
24-0226-120 Radius faceplate $9.00 $35.00 $37.00
24-0226-220 LH bevel faceplate $9.00 $35.00 $37.00
24-0226-320 RH bevel faceplate $9.00 $35.00 $37.00
1870 Flushbolt FaceplatesMODELS & FINISHES 313, 335, 628
24-0168-00 Flat faceplate $15.00
24-0168-01 Radius faceplate $15.00
24-0168-02 LH bevel faceplate $15.00
24-0168-03 RH bevel faceplate $15.00
24-0168-04 Radius with weatherstrip $15.00
MS+1890 Deadlock FaceplatesMODELS & FINISHES 313, 335, 628
24-0270-020 Flat faceplate $10.00
24-0270-120 Radius faceplate $10.00
24-0270-220 LH bevel faceplate $10.00
24-0270-320 RH bevel faceplate $10.00
24-0270-420 Radius with weatherstrip $10.00
2190 Dual Force® Interconnected Deadbolt/Deadlatch FaceplatesMODELS & FINISHES 313, 335, 628
91-0266-01 Flat faceplate and radius faceplate kit $39.00
2331 Heavy Duty Deadbolt FaceplatesMODELS & FINISHES 121 US26D US3, US26
22-0170 Flat faceplate $42.00 $42.00 $48.00
22-0032 Strike plate $42.00 $42.00 $48.00
3300 Fire-Rated Mortise Exit Device FaceplatesMODEL & FINISHES 335, 628
24-0015-020 Flat faceplate $9.00
ACCESSORIES
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
53
4070 Short Throw Deadbolt FaceplatesMODELS & FINISHES 313, 335, 628
24-0136-00 Flat faceplate $10.00
24-0136-10 Radius faceplate $10.00
24-0136-20 LH bevel faceplate $10.00
24-0136-30 RH bevel faceplate $10.00
4500 Standard Duty Deadlatch FaceplatesMODELS & FINISHES 313, 335, 628
24-0017-0220 Flat faceplate $6.00
24-0017-1220 Radius faceplate $6.00
24-0017-2220 LH bevel faceplate $6.00
24-0017-3220 RH bevel faceplate $6.00
24-0017-4220 Radius with weatherstrip $9.00
4530 Standard Duty Deadlatch FaceplatesMODELS & FINISHES 313, 335, 628
24-0016-020 Flat faceplate $9.00
24-0016-120 Radius faceplate $9.00
24-0016-220 LH bevel faceplate $9.00
24-0016-320 RH bevel faceplate $9.00
4900 Heavy Duty Deadlatch FaceplatesMODELS & FINISHES 313, 335, 628 US4, US26D US3, US26
24-0137-01 Flat or bevel faceplate $6.00 $30.00 $35.00
24-0137-02 Radius faceplate $6.00 $30.00 $35.00
24-0137-03 Radius with weatherstrip $9.00
4900 Heavy Duty Deadlatch Special FaceplatesMODELS & FINISHES 313, 628
24-0140 Radius with weatherstrip seal (1-1/8" x 6-7/8") $13.00
24-0144-01 Flat or beveled doors (1-1/8" x 7-1/4") $12.00
24-0144-03 Radius with weatherstrip (1-1/8" x 7-1/4") $14.00
4920, 8300 FaceplatesMODEL & FINISHES 313, 335, 628
24-0138-01 Flat or bevel faceplate $9.00
ACCESSORIES
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
54
7100, 7160 Electric Strike FaceplatesMODEL & FINISHES 313, 335, 628
24-0685-01 Round corner faceplate (1-1/4" x 4-7/8") $10.00
7101 Electric Strike FaceplatesMODEL & FINISHES 313, 335, 628
24-0685-02 Radius faceplate (1-1/4" x 4-7/8") $10.00
7110 Electric Strike FaceplatesMODEL & FINISH 652
22-0558 Round corner faceplate (1-7/16" x 7-15/16") $19.00
7111 Electric Strike FaceplatesMODEL & FINISH 652
22-0557 Round corner faceplate (1-7/16" x 10-1/4") $24.00
7130 Electric Strike FaceplatesMODEL & FINISHES 313, 335, 628
24-0686-01 Round corner faceplate (1-1/4" x 6-7/8") $17.00
7131 Electric Strike FaceplatesMODEL & FINISHES 313, 335, 628
24-0686-02 Radius faceplate (1-1/4" x 6-7/8") $17.00
7140, 7170 Electric Strike FaceplatesMODEL & FINISHES 313, 335, 628
24-0687-01 Radius faceplate (1-1/4" x 4-7/8") $10.00
ACCESSORIES
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
55
POWER
PS-SE Power SupplyMODEL
PS-SE Power supply for exit devices with SE latch retraction option $653.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
POWER SUPPLY
PS -SESE Power Supply for exit devices w/ SE option
Kitted Option
MODEL
BBK-SE Add-on board to the PS-SE, must be supplied with 2 each 12V - 7AH batteries (by others) $225.00
PS-1 Power SupplyMODEL
PS-1 Power supply, 12/24 VDC boxed P/S 1 amp $352.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
POWER SUPPLY
PS -11 Standard Power Supply
PS-LR Power SupplyMODEL
PS-LR Power supply for exit devices with LR latch retraction option $868.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
POWER SUPPLY
PS -LRLR Power Supply for exit devices w/ LR option
Kitted OptionsMODEL
BBK-LR Add-on board to the PS-LR, must be supplied with 2 each 12V - 7AH batteries (by others) $244.00
POWER
800.461.3007 • Fax: 800.461.8989
160 Four Valley DriveVaughan, ON L4K 4T9www.assaabloy.ca
56
4603, 4605, 4606
Transformer/Rectifier/Piezo HornMODELS
4603 Rectifier $17.00
4605 Transformer, 115 VAC to 12/24 VAC $62.00
4606 Plug-in transformer, 115 VAC to 24 VAC only $100.00
29-0218 Piezo electric horn $23.00
ELX ElectroLynx(TM) Adapter to connect Adams Rite products to the ElectroLynx system $36.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
ACCESSORY
460 33 Rectifier
5 Transformer
6 Transformer (plug in)
4612 Power Transfer DeviceMODELS
4612-1 Wire transfer, 105° swing $189.00
4612-2 Wire transfer, 180° swing $245.00
4612-1-SC Wire transfer, swing clear 90° swing $326.00
HOW TO ORDER Specify quantity and the following information. Order related products separately.
DOOR SWING
4612 -11 105° swing
1SC Swing clear, 90°
2 180° swing
POWER
CANADAp 800.461.3007 p 905.738.2466 f 800.461.8989 f 905.738.2478
assaabloy.caASSAABLOY DSS Canada Vaughan, Ontario
ASSA ABLOY is the globalleader in door opening solutions,dedicated to satisfyingend-user needs for security,safety and convenience
adamsrite.com © 2016, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.