Piano
Transcript of Piano
Sejarah Piano :
Sekitar pertengahan abad kedua belas ditemukan kunci monochord, yang dikembangkan lebih lanjut, beberapa senar ditambahkan sampai akhirnya kita mengenali Clavichord.
Menjelang 1350 atau pertengahan abad keempat belas pandai besi Jerman mulai membuat kawat melalui pelat baja, dan metode ini berlanjut sampai awal abad kesembilan belas. Besi, emas, perak, kuningan, usus, rambut kuda dan terakhir nylon digunakan sebagai bahan senar pada berbagai instrumen yang berbeda. Penggunaan awal dari kawat baja muncul pada tahun 1735 di Wales. Perusahaan piano Broadwood menjelaskan bahwa mereka menggunakan kawat baja pada 1815 dari Jerman dan Inggris, tetapi hal ini belum dikonfirmasi. Menurut Oxford Companion, Pada tahun 1819 Brockedon mulai membuat kawat baja melalui lubang di berlian dan rubi. Sebelum 1834 kawat untuk instrumen dibuat dari besi atau kuningan sampai Webster dari Birmingham memperkenalkan kawat baja. Kawat terbaik dikatakan dibuat di Nuremberg dan kemudian dari Berlin. Kawat telah berlapis emas, perak, dan platinum untuk menghentikan karat dan kawat berlapis masih bisa dibeli, tetapi kawat yang dipoles adalah yang terbaik.
Sekitar 1400 Clavichord memiliki sekitar sepuluh string. Clavichord paling sederhana dan biasanya yang terkecil dari instrumen keyboard string. Ini lebih mirip kotak dengan keyboard dengan string horizontal ditempatkan paralel pada sisinya. String dipukul dari bawah oleh potongan kecil dari logam berbentuk obeng.
Sejak sekitar 1450 keyboard hampir tetap sama, kecuali sedikit variasi dalam warna kunci. Organ adalah instrumen keyboard pertama yang berat dengan tuts yang sangat bervariasi sejak awal, kunci sangat berat yang disebut pemainnya “Organ Beaters.” Sekitar abad ketiga belas atau keempat belas, keyboard diletakkan menurut modus alami yang mana merupakan dasar dari sistem musik.
1598Paladino menjelaskan instrumen yang dibuatnya pada surat kepada Duke of Modena, yang disebut “Piano e Forte.” Meskipun instrumen ini dapat lembut dan keras, tidak jelas apakah itu adalah tipe harpsichord yang pas dengan perangkat atau piano pemukul.1709Tahun 1709 adalah salah satu sumber yang paling memberikan untuk munculnya instrumen yang benar-benar dapat disebut “Pianoforte.” Penulis Scipione Maffei menulis sebuah artikel tahun itu tentang pianoforte yang diciptakan oleh Bartolomeo Cristofori (1655-1732), yang mungkin memproduksi empat “gravicembali col piano e forte” atau harpsichord dengan lembut dan keras. Instrumen ini menampilkan pencapaian nyata pertama mekanisme dan sering disebut “palu harpsichord.” Palu kecil terbuat dari kulit tertutup.1711John Shore adalah penemu garpu tala. Shore merancang garpu tala untuk membantu dia menyetel kecapinya. Dia meninggal pada 1752.1725Johann Ulrich von Konig, penyair pengadilan di Dresden, mempublikasikan terjemahan artikel Maffei ‘s pada piano Cristofori dan dalam setahun pembuat clavichord Gottfried Silberman (1683-1753) membuat dua piano tersebut. Disini piano tidak diterima dengan sangat antusias. Bach teman dekat Silberman tidak menyukai piano saat pertama kalinya, tetapi opininya kemudian berubah. Christian Ernst Friederici, murid dari Silberman, melanjutkan percobaan pada piano dan membuat piano kecil berbentuk kotak yang terbilang sukses, ia menamai pianonya “Fortbien”. Kemudian Friederici mulai memproduksi “pyramid” piano dimana piano diatur secara vertikal, dengan kurva treble pada sisi atas dan merengkuh pasak-pasak di bagian bawah.
Setelah akhir Perang Tujuh Tahun di Germany tahun 1760 piano menjadi begitu populer. Ini karena dua belas pembuat instrumen datang ke Inggris, mereka dikenal sebagai “dua belas rasul”. Johann Christoph Zumpe adalah salah satu dari mereka. Buntebart, yang juga murid dari Silberman datang ke Inggris, dan ia pertama kali bekerja dengan Shudi seorang pembuat harpsichord terkenal.
1730Menurut Pierce Piano Atlas Perusahaan pembuat piano Kirkman didirikan pada 1730. Kirkman mewarisi bisnis dari istri Tabel, yang dinikahinya satu bulan setelah kematian Tabel. Tabel adalah pembuat harpsichord yang diajari oleh Ruckers. Dia datang ke London pada 1680 dan memulai membuat harpsichord. Kirkman Abraham, yang lahir tahun 1710 di Bischweiler dekat Strasbourg, datang untuk bekerja pada Tabel. Pada 1742 ia pindah ke Great Pulteney Street.1735JC Bach lahir pada 1735. Pada tahun yang sama, menurut Pierce, Schiedmayer membuat piano pertamanya. Sebelum itu dia adalah seorang pembuat clavichord. Ia lahir pada 1711 dan meninggal di Erlangen pada 1781. Dia memiliki tiga putra, dua di antaranya membuat piano sekitar 1790, nama mereka Adam Schiedmayer dan David Schiedmayer. Kemudian, sekitar tahun 1853, mereka menjadi perusahaan tunggal.1739Ini bisa menjadi tanggal untuk piano pertama, yang dibuat oleh Domenico del Mela, yang lebih mirip sebuah piano upright seperti yang kita kenal hari ini atau yang dibuat oleh Hawkins pada tahun 1800.1748Stein menjadi murid Silberman dan dia bersamanya sampai Juni, 1749. Pada 1760 dia menikah dan memiliki lima belas anak. Salah satu anaknya bernama Nanette Stein adalah murid terbaiknya. David Schiedmayer juga belajar di bawah dia. Stein melakukan banyak riset dan mengembangkan beberapa pola yang aneh.1750Thomas Culliford, 112 Cheapside London, membuka usaha pembuatan pianonya pada semester akhir abad kedelapan belas. Dia juga bekerja untuk Longman & Broderip untuk sementara waktu.1752Clementi lahir di Roma, anak dari pengrajin perak. Pada 1766, ketika dia berusia empat belas, ia datang ke Inggris dan tinggal di Wiltshire dibawah pengawasan Petrus Beckford. Dia membuat debut di London pada tahun 1801. Clementi mempublikasikan metode piano yang sangat tinggi dimana Beethoven disahkan, mengirim murid-muridnya kepada Clementi.1756WA Mozart lahir.1760Christian Ernst Friederici mulai berdiri sendiri. CPE Bach menulis sebuah surat kepada Forkel pada 10 November 1773, menyatakan bahwa ia menyukai clavichor Friederici daripada yang dibuat oleh Fritz. Friederici kemudian membuat piano-piano kecil berbentuk kotak yang menjadi sangat populer.1761Pada bulan September John Broadwood memulai pekerjaannya untuk Burkat Shudi.1761JC Zumpe adalah orang Jerman yang magang dengan Silberman. Dia juga bekerja untuk Shudi membuat harpsichord untuk sementara waktu. Pada 1761 dia mendirikan bengkelnya di 7 Princess Street, Hanover Square, London, di mana ia bekerja sampai 1780. Dari 1780 sampai 1784 dia ada di Princess Street, Cavendish Square. Dia dalam kemitraan Buntebart dari 1769 sampai 1779. Ada kombinasi piano / organ di Musée des Arts et Metiers di Paris, dengan nama Zumpe dan Buntebart. Aksi piano kotak Zumpe sangat sederhana dan telah disebut “kepala pria tua” atau “tongkat pel tindakan tunggal.” Kepala palu dimasukkan ke string dengan bantalan dari kulit tetap ke ujung kabel kuningan tebal dimasukkan ke punggung kunci. Pada sisi kiri dari instrumen ada penghentian atau peningkatan semua dampers atau dua tangan berhenti untuk meningkatkan seksi treble dan bass secara bebas. Piano dibuat oleh Zumpe tahun 1766 dengan catatan dibagi menjadi dua bagian, mengontrol senar-senar yang berbeda, untuk memungkinkan penyetelan suara tajam sebagai kres dan mol sebagai flat. Zumpe menyewa pembuat cabinet Skotlandia, John Broadwood yang datang ke
London untuk mencoba peruntungannya. Tahun 1769 ia menikahi Barbara, anak dari Shudi pembuat harpsichord dimana Zumpe digunakan untuk bekerja. Pada tahun 1763 iklan pertama untuk piano di Inggris diambil oleh Zumpe.1770Beethoven lahir.1771Robert Stodard mempatenkan nama “Grand” untuk instrumennya.1777Erard membuat piano pertamanya di Prancis. Dia kemudian pindah ke Inggris dimana ia tinggal sampai 1796. Dia kemudian kembali ke Prancis dan pada tahun 1802 membuka pabrik nya Paris.1779Membuat piano didirikan di Estonia. ini adalah toko-toko kerajinan kecil jantan sekitar 20, kemudian mereka menjadi perusahaan bernama Estonia yang dimulai pada tahun 1893.1787Pascal Taskin mengembangkan bentuk string kembali. Taskin menggunakan pasak yang merengkuh skrup di dalam bentuk loop metal, dimana senar berlalu. Salah satu ujung dari loop melewati blok kayu sedemikian rupa sehingga dapat dipindahkan ke belakang atau ke depan dengan cara gila. Metode ini adalah produk yang mahal dan tidak banyak digunakan, tidak seperti sistem James Stewart yang diciptakan pada tahun 1827, yang masih digunakan sampai sekarang oleh para pembuat piano.1790James Ball mulai membuat piano di Duke street, London, dan aktif sampai tahun 1817.1801Edward Riley memperoleh paten untuk piano transposing, di mana keyboard bergerak lateral, tuts bekerja catatan yang berbeda. Pada tahun yang sama Jacob Ball membuat piano transposing, yang katanya masih ada.1810Piano Chappell dari London didirikan. Perusahaan juga membuat piano Elysian yang sekarang dibuat oleh Young Chang.1811Samuel Chappell, Francis Tattor, dan John Baptist Cramer membentuk mempublikasikan firma Chappell & Co pada 1 Januari 1811. Cramer tersisa di 1813 dan Chappell dikatakan telah membubarkan kemitraan keseluruhan pada tahun 1825. Salah satu sumber mengklaim bahwa Cramer terlarut kemitraan pada akhir perjanjian tujuh-tahun di 1818. Chappell mengajak putra tertuanya, William masuk dalam usaha, dan ia menjadi direktur perusahaan ketika ayahnya meninggal pada tahun 1834, meskipun ibunya yang luar biasa William menjadi manajer. Putra kedua, Thomas, 1819-1902, meninggalkan sekolah untuk bergabung dengan ayahnya ketika ia menjadi buta menjelang akhir hidupnya. Cramer dilahirkan di Mannheim pada 1771 dan meninggal di Inggris pada tahun 1858. Clementi mengajarinya dan di tahun 1793 dia memberikan penampilan publik pertamanya dengan menggunakan piano Broadwood. Dia menjadi terkenal karena permainannya dan mendapat julukan “Glorious John.” Salah satu muridnya yang lebih terkenal adalah George Smart. Setelah bekerja untuk Chappell, Cramer mulai mempublikasikan sendiri. Seperti Chappell pada saat itu nama perusahaan terkait dengan membuat piano. Sejumlah pembuat piano dan organ pembangun baik cetak dan diterbitkan musik pada waktu yang sama.1825Pierre Erard mematenkan di Inggris metode memperbaiki bar logam untuk mematri dengan menggunakan baut, yang melewati lubang dipotong di papan suara. Bingkai besi grand modern terpasang dengan cara yang sama dan meskipun bar Broadwood digunakan dari tahun 1808 selalu ada kontroversi siapa yang pertama kali, karena Broadwood tidak mematenkan palang metal yang dikombinasikan piringan senar dari metal sampai 1826 .1825Babcock (1785-1842) dipatenkan rangka besi penuh, yang pada awalnya tidak sepenuhnya berhasil tapi masih sebuah perkembangan penting.
1826Robert Warnum dipatenkan aksi pita-cek, yang mirip dengan peredam. Ia juga mengambil paten untuk merangkai diagonal. Dari 1810-1812 ia berpartner dengan George Wilkinson di 315 Oxford Street dan 11 Princess Street. Wilkinson kemudian bekerja untuk Broderip setelah ini.1827James Stewart, partner pertama Chickering, string kembali dipasang, tidak hanya untuk bichords baja tetapi juga di bagian treble.1827Thomas Loud di Amerika membuat down-mencolok besar pertama. Lokakarya-Nya berada di 22 Devonshire Street, Queens Square, London, dari 1802 sampai 1825 ketika ia pindah ke Amerika Serikat.1828WH Barnes mendirikan dan juga menjual piano dengan nama Normelle, Osbert dan D’Almaine. Kemudian dalam tahun 1900 mereka menggunakan nama Kemble dan Monington.1828Rushworth yang didirikan oleh William Rushworth, organ pipa pembangun di Yorkshire. Pada akhir 1800-an perusahaan itu pindah ke Liverpool. Tampaknya permulaannya sebuah piano di jual dari kantor, hampir secara kebetulan, dan kemudian mereka memutuskan menjual piano kepada masyarakat umum. Piano pertama dibuat oleh Clarence Lyon dari London, dan tidak lama setelah itu Rushworth mulai memproduksi piano-piano klasik British terkenal di dunia, yang sekarang dalam generasi kelima di bawah kepemimpinan Alastair Rushworth. dan menjadi pembuat organ terbesar di Inggris. Sekitar tahun 1921 Rushworth juga memiliki piano-piano dari Squire & Longsons.
Pada tahun 1969 produksi piano terhenti di St Anne Street. kemuadian mereka berkonsentrasi membangun organ.
1828Palu cat-ditutupi dengan bulu kelinci dan wol domba merasa digunakan. Ini juga bisa saja ketika dua lapisan merasa digunakan. Kulit rusa masih umum digunakan untuk treble atas.1828Perusahaan piano Bösendorfer didirikan di Vienna. Bösendorfer Ignaz (1794-1859) diberi hak untuk perdagangan sebagai pembuat piano.1829Rawler membuat piano upright peredam di bawah yang pertama. Tingginya sekitar satu meter.1829Squire & Longson, London, didirikan. Pada tahun 1938 terjadi kebakaran di pabrik, dan kemudinan Kemble membeli namanya dan menghasilkan piano dengan nama Squire & Longson sampai tahun 1970-an. Tenaga kerja diambil oleh Maxwell & Codd Whelpdale Ltd untuk membuat Welmar.1829B. Squire didirikan. Pada tahun 1936 Kemble mengambil alih produksi.1830Friedrich Grotrian, meninggalkan Jerman untuk mendirikan sebuah bisnis musik di Moskow. Ia kembali 25 tahun kemudian seorang pengusaha kaya dan menjadi mitra dari sebuah pabrik piano Grotrian-Steinweg. Pada tahun 1865 keluarga Grotrian mengambil alih sisa saham perusahaan1830Claude Montal (1800-1865) memulai karirnya di Paris sebagai penyetel piano buta pertama. Dia adalah putra pembuat pelana dan kehilangan penglihatannya saat sakit tifus pada usia enam tahun. Orang tuanya mengirimnya ke sekolah biasa, tapi kemudian dia dididik Royal Institute untuk orang buta di Paris. Pada tahun 1834 ia menerbitkan sebuah judul buku “Cara Tune Piano Anda sendiri” dan kemudian membuka toko dan workshop sendiri.1830Chickering membuat bingkai satu-sepotong besi untuk grand dan dipatenkan di tahun 1843.
1830Ada sekitar lima puluh pembuat piano di London pada saat itu.1831William Allen mempatenkan rangka besi cor.1831Perusahaan dari Richard Lipp, Stuttgart, didirikan.1832Samuel, Barnet & Sons, London, didirikan.1835Wilke Breslau menciptakan palu pertama yang mencakup mesin.
John Strohmenger dari London didirikan. Pada tahun 1938 Chappell membelinya.
1835Grotrian-Steinweg piano didirikan oleh Friedrich Grotrian (1803-1860).1836John Brinsmead membuktikan dirinya sebagai pembuat piano di London.1836Steinweg membuat piano grand di German dan kemudian pindah ke Amerika pada tahun 1853 nama perusahaan diubah menjadi Steinway.1836Tate menggunakan rel setengah-pukulan.1836Wheatley Kirk dipatenkan bingkai besi pertama yang lengkap untuk piano upright.1837Piano Allison, 29 Berners Street, London, didirikan. Tempat lain dari perusahaan itu pada 49 Wardour Street, Soho, London (1839), dan 75 Dean Street (1846), juga di Soho.1838Moore & Moore dari London didirikan. Perusahaan ini diambil alih oleh yang Kemble pada tahun 1933.1839Hallet & Davis, Boston, USA didirikan.1840Perusahaan Allison didirikan.1840Antoine-Jean Bord dari Paris (1814-1888), mulai membuat piano-piano. Pada satu waktu mereka adalah produsen terbesar di Perancis dengan produksi 4.000 instrumen.1840J. dan C. Fischer mulai membuat piano-piano di New York, Amerika Serikat.1842Organ St Nicholas di Newcastle-upon-Tyne disetel ke temperamen equal. Hal ini diyakini telah organ pertama yang disetel dalam temperamen yang sama di Inggris.1842Yohanes toilet membuat piano dengan dua soundboards. Masing-masing tulang rusuk Soundboard tiga belas untuk mendukung itu, dan suara adalah ditransmisikan dari papan suara atas ke bawah Soundboard melalui sebuah jembatan kedua.1842George Russell didirikan di London. Alamat terakhir yang diketahui bagi perusahaan berada di 2 Stanhope St, London. Dari sekitar 1936 Cramer membuat piano, dan nomor serinya setelah tahun itu adalah dari Cramer. Sebuah contoh dari 1939 akan menjadi nomor 128750, dan satu awal dari sekitar tahun 1900 akan menjadi nomor 16499.1842Strich & Ziedler, New York, Amerika Serikat, didirikan.
1843Bord dari Paris digunakan bar tasto, yang merupakan jenis bar tekanan.1843George Rogers dari London didirikan. Kemudian Bechstein menugaskan mereka untuk membangun London membuat piano Bechstein di awal 1890-an. Rogers bergabung dengan Hopkinson tahun 1918 dan keduanya diambil alih oleh Zender pada tahun 1963.1843Co-Op didirikan pada 1 Desember di Toad Lane, Rochdale. Sekitar enam tahun kemudian piano pertama dijual ke seorang pria menggunakan keuntungannya dari “Divi.” Pemandangan dari piano dibawa ke pondok belum pernah dilihat sebelumnya di Rochdale. Co-Op menjadi pabrik piano dan menjual piano dengan merek Amyl, Amylette, dan Co-Op. Pabrik produksinya di Birmingham.1844Schwander membuka pabrik piano tindakannya. Anak mertua Herrburger Nya menggantikan dia dan akhirnya Brooks mengambil alih, sehingga Herrburger Brooks.1845Ronisch didirikan, pertama di Dresden dan kemudian di Leipzig.1851Periode piano klasik yang lebih modern, penggunaan frame besi lebih besar.1852Chickering & Sons, Piano Makers, membuka pabrik di Boston, Amerika Serikat.1852Albert Weber dilahirkan di Bavaria pada 8 Juli 1828. Pada tahun 1852 ia mendirikan Piano Company di Manhattan Weber, New York. Pada tahun 1869 perusahaan membuka tempat baru di lokasi pusat kota di Fifth Avenue dan Sixteenth Street, di New York. Pada tahun 1903 Perusahaan Aeolian New York diperoleh Weber. Pada sekitar waktu ini mereka juga membuka sebuah pabrik di Hayes, Inggris. Pada tahun 1985 pabrik piano Aeolian ditutup. Perusahaan Wurlitzer membeli nama Weber, tetapi mereka tidak pernah membuat piano dengan nama itu. Pada tahun 1986 mereka menjual nama Young Chang, yang mulai memproduksi piano-piano Weber. Namun, ini tidak berlangsung lama karena Samsung Amerika, Inc memperoleh lisensi untuk menjual piano Weber dan mendirikan kantor-kantor perusahaan di New Jersey, Amerika Serikat. Sekitar 1988 mereka memperkenalkan nomor yang berbeda untuk piano grand dan uprights. Grands dimulai di nomor 034442 dan uprights dimulai pada 1327707. Pada tahun 1992 mereka memperkenalkan model baru. Perjanjian tersebut mewajibkan Samsung untuk membeli piano-piano dari Young Chang. Namun, pada Desember 2003 Samsung meninggalkan Weber dan sekarang memasarkan piano Cina di bawah nama Behning.
Ada beberapa membuat piano akan di bawah nama Weber, sebagian besar di AS, tetapi ada satu di Berlin dan sebuah perusahaan besar di Kanada.
1853Bechstein dari Berlin terbentuk.1853Blüthner dibentuk.1853Steinweg berubah nama menjadi Steinway dari Amerika dan perusahaan piano Steinway didirikan.1853Bord menggunakan pegas spiral untuk jack.1853Claude Montal salah satu tuner piano buta pertama. Dia memamerkan pedal sostenuto, yang dibeli Steinway. Sebuah monograf yang ditulis oleh Montal di Paris tahun 1856, berjudul “L’Art d’accorder soi-meme piano anak,” menggambarkan penemuannya.1854Gabler didirikan di New York, Amerika Serikat.
1854Mason & Hamlin didirikan di Boston, USA, oleh Henry Mason dan Emmons Hamlin.1855Pada 12 Agustus di malam hari, pabrik Broadwood Horseferry Road terbakar habis. Pabrik itu membuat 2300 piano dalam setahun, dan 575 karyawan bekerja di sana. Pada waktu itu pabrik piano mereka yang terbesar di dunia.1855W. SAMES Ltd didirikan.1856Decker & Son, NY, USA, didirikan.1856Piano Wurlitzer, Amerika Serikat, didirikan.1857Steck, NY, USA, didirikan. Mereka kemudian bergabung dengan Aeolian.1858Halle Orchestra dibentuk.1858Monington & Weston, London, didirikan. Kemudian mereka menempatkan rangka besi uprights ganda piano, membuat piano sangat berat tetapi sangat stabil.1859Agustus Forster mendirikan sebuah bengkel kecil di Lobau, Jerman, di mana ia membuat piano pertamanya. Dari sana ia mulai membuka pabrik pertamanya di tahun 1862.1859Ludwig Bösendorfer mengambil alih bisnisnya ketika ayahnya meninggal.1859Kimball, Chicago, AS, didirikan.1859Pada tanggal 20 Desember tahun ini Henry Steinway Jr mengambil paten untuk over-stringing untuk piano grand (nomor paten 26532). Ini adalah titik balik untuk Steinway dan piano yang memenangkan banyak penghargaan di seluruh dunia untuk piano grand yang terbaik karena fitur over-stringing.1860Alfred Dolge memulai Persediaan Piano Amerika di New York City. Amerika Felt Co diperoleh APSC tahun 1900.1862DHBaldwin mendirikan perusahaannya di Amerika. Pada tahun 1889 namanya dirubah ke Baldwin Piano Company.1862Ajello & Sons, London. Giuliano Ajello mendirikan bisnis di London. Mereka memproduksi berbagai piano dan sangat sukses, akhirnya mengoperasikan dua pabrik di London. Piano Ajello memenangkan banyak hadiah untuk pembuatan piano di Eropa. Pabrik Ajello tutup sekitar 1930.
Arthur Giovanni Ajello, dan Louis Robert Ajello, cucu dari Giuliano Ajello beremigrasi ke Kanada 1910, dan mendirikan perusahaan mereka sendiri, yang beroperasi sampai tahun 1930-an.
1863Henry F. Miller & Sons dari Boston, AS, didirikan.1864Anton Petrov mendirikan perusahaan piano di Cekoslovakia membuat.1864Kranich & Bach, NY, USA didirikan, yang mengkhususkan diri dalam grand kecil.1866Nathaniel Berry Piano didirikan. Pada tahun 1965 Barrat & Robinson membelinya.
1866Piano kotak terakhir dibuat oleh Broadwood. Hal ini karena piano cottage kecil lebih populer di rumah.1870Shenstone & Co pembuat tuts piano didirikan. Banyak pembuat piano menggunakan kunci mereka, termasuk Cramer, Kemble, Rogers, Knight dan Challen.1871Albion Pianoforte didirikan di London.1871Piano Bohemia didirikan, di kota Jihlava, Republik Ceko. Sekitar 1924 bekerja sama dengan pembuat piano Piano Wina Bohemia mulai membuat Hofmann & Czerny, mempekerjakan sekitar lima puluh pekerja.1871Piano Perzina dimulai pada 1 Juli, Julius dan Albert Perzina membuka toko pertama mereka di Schwerin. Perzina piano sekarang Cina dibuat.1872Smith, Barnes & Stroeber didirikan. Mereka tampaknya berhenti membuat piano tahun 1920. Piano-piano dibuat di Clybourn, Chicago, AS. Pada 1884 nama menjadi Smith dan Barnes.1872Sohmer, NY, USA, didirikan. Hugo Sohmer adalah penemu dan orang pertama untuk membangun baby grand lima kaki di Amerika Serikat.1872Steinway membuat hak paten timbangan duplex. Bantalan bar pada panjang mati string digunakan untuk membantu menghasilkan harmoni yang selaras1883Bansall & Sons didirikan.1887Torakusu Yamaha mendirikan “Yamaha Organ Ream” dan menjadi Bapak dari industri musik Jepang. Pada tahun 1887 Torakusa Yamaha membangun organ buluh pertama. Pada tahun 1900 produksi piano tegak dimulai, dan pada tahun 1902 produksi piano grand dimulai. Pada 1904 piano Yamaha memenangkan penghargaan untuk keunggulan di St Louis World Exposition.1888Windover didirikan, dan juga membuat Mertons. Mereka mungkin punya pabrik di Manchester atau toko. Piano Inggris Manufacturing Co Ltd juga membuat piano-piano Windover.1888Broadwood baja bar kurang frame diperkenalkan.1890Ambridge & Son London.1911Michael Kemble mendirikan Kemble.1930Kawai meninggalkan Yamaha dan memulai perusahaannya sendiri.1931Piano Neo-Bechstein dengan Soundboard, hanya diperkuat melalui pengeras suara.1933Whelpdale dan Maxwell mulai membuat piano-piano Welmar sendiri dan Cod bergabung dengan perusahaan pada tahun 1920. Whelpdale dan Maxwell dan Cod Ltd masih bertahan dengan nama itu hari ini.1933Nama Squire dan Longson pergi ke Kemble.1956Pearl River Piano didirikan. Mereka mulai dengan enam toko-toko dan bengkel, dan sekarang memiliki tenaga kerja lebih dari 4.000 dan lebih dari 300.000 meter persegi ruang pabrik lantai. Produksi piano adalah 100.000 per tahun. Dua puluh persen dari produksi mereka diekspor ke barat.
1956Kawai kini mempekerjakan lebih dari 500 orang dan menghasilkan sedikit diatas 1,500 piano tiap tahun. Koichi Kawai menerima “Medali Pita Biru” yang prestisius dari Kaisar Jepang, menjadi perusahaan pertama di industri instrumen musik Jepang untuk menerimanya. Koichi Kawai meninggal tiba-tiba pada Oktober 1955 pada usia 70. Sekitar waktu ini 33 tahun Shigeru Kawai mengambil alih perusahaan dan memulai perubahan radikal. Dia mulai pembangunan dua pabrik baru, satu pabrik pengolahan kayu dan tanaman lainnya perakitan piano, menjadi jalur produksi modern pertama perusahaan.l958Pearl River Piano Group Ltd telah memproduksi piano berkualitas di Guangzhou, Cina sejak 1956. Pada tahun 2007 mereka memiliki kapasitas untuk membangun lebih dari 100.000 piano satu tahun serta array yang luas angin Pearl River dan instrumen senar. 3-juta kaki persegi di fasilitas kami Delta Sungai Pearl dilengkapi dengan teknologi terbaru dalam Komputer Aided Design dan dikelola oleh tenaga kerja yang berdedikasi dengan panjang 17 tahun rata-rata layanan dengan Pearl River dan telah diberikan ISO 9001 Sertifikasi untuk pengendalian kualitas.l958Alat Musik Samick didirikan. Samick telah berkembang menjadi produsen instrumen musik terbesar di Korea, dan sekarang perusahaan piano terbesar di dunia. Mereka hanya memulai membuat piano tegak di tahun 1960 dan piano grand di tahun 1970.l959Perusahaan Challen berhenti berjualan bebas piano mereka, dengan nama pergi ke Brasted bersaudara pada awalnya, kemudian untuk Barrat & Robinson.l960Yamaha memproduksi dua ribu dua ratus piano sebulan.1960Pada Juli 1Oth, Lindner, anak perusahaan dari Rippen Belanda, dibuka di Irlandia. Piano-piano yang dihasilkan revolusioner; frame dilas aluminium alloy diperkenalkan mengurangi berat badan sekitar setengah dari kerangka cor. Plastik dipakai lebih banyak untuk bagian aksi dan tuts. Ada flensa untuk whippen dan palu, dan peredam dijepitkan ke rel.1962Steinway memperkenalkan Teflon sebagai bahan bushing pada semua piano grand digunakan sampai tahun 1982.1963Kawai Amerika didirikan, diikuti oleh Kawai Eropa, Kanada, Australia, dan Asia.1963Pada pameran di Festival Frankfurt adalah Herrburger Brooks Schwander dengan lengan tembaga, dilapisi dengan bushing plastik PTFE bukan bushing kain. Amber Cahaya Engineering Co mensuplai bushing plastik tembaga.1963Kompetisi Piano Leeds dibentuk di Inggris.1963Rogers diakuisisi oleh Zenders.1964Kembles diperoleh John Brinsmead dan Piano Cramer.1965Barrat & Robinson Ltd dibeli piano Nathaniel Berry.1966Jasper Corp mengakuisisi Bösendorfer.1969Piano Kemble dipindahkan ke kota baru Milton Keynes dari pabrik Stoke Newington London.1971Kemble mengambil distribusi Inggris piano Yamaha dan instrumen musik.
1971Pleyel dan Gaveau piano dibuat oleh Schimmel 1971-1994. Pada tahun 1994 produksi pindah ke Perancis dan desain baru diperkenalkan memakai aksi Langer dan Renner.1972Blüthner dinasionalisasi oleh pemerintah Jerman Timur.1973Pengecoran diperlengkapi untuk memproduksi rangka besi untuk Barrat tampaknya di ambang tutup, maka Barratt & Robinson membeli perusahaannya untuk terjaminnya pasokan rangka di masa depan.1974Baldwin dari Amerika Serikat memiliki semua saham Bechstein.1974Knight memperkenalkan suatu bushing serat pin merebut (jarum penyetel) yang dikatakan punya tekanan sebesar 30,000 pon., Dibandingkan dengan ring kayu tradisional yang hanya 6.000 lbs.1980Kawai membuka fasilitas Ryuyo grand piano. Mampu memproduksi lebih dari 60 piano grand per hari. Pabrik Ryuyo mewujudkan keahlian tangan dan teknologi canggih otomatis.1982Steinway berhenti memakai tuts dari gading.1983Eavestaff berhenti membuat piano di Inggris.1984Zender piano yang dibuat oleh Bentley untuk mereka.1984Yamaha memiliki saham mayoritas di penjualan organ Kemble dan perusahaan diberi nama baru “Yamaha-Kemble Musik (UK) Ltd” Pabrik piano Kemble menandatangani persetujuan untuk memulai membuat piano Yamaha dibawah lisensi di Inggris. Produksi piano kembali pas dengan keadaan mesin seni dan teknik produksi dikendalikan komputer disediakan oleh Yamaha.1985Birmingham bersaudara membeli Steinway dan sisanya dari divisi musik instrumen CBS (kecuali Fender).1985Bentley berhenti membuat tutsnya sendiri. Tuts diperoleh dari Herrburger Brooks.1985Pabrik Kemble mulai memproduksi berbagai piano akustik Yamaha untuk dijual di pasar Inggris. Dua tahun kemudian Yamaha dinominasikan sebagai mitra manufaktur Kemble tunggal Eropa.1986Baldwin dijual Bechstein Karl Schulze, teknisi piano Jerman master.1987Zender benar-benar diambil alih oleh Bentley yang termasuk Piano Rogers.1987Perusahaan Ningbo Oriental Piano Parts didirikan. Presidennya adalah Mr Luo Senhe. Perusahaan mempekerjakan George F. Emerson, seorang desainer piano Amerika yang bekerja untuk Baldwin Piano Inc dan Mason & Hamlin. Juga, piano tala Wina dan menyuarakan spesialis Sibin Zlatkouic, dan piano spesialis Jepang Ema Shigeru membantu untuk memantau pengendalian kualitas dan produksi. Pada tahun 2001, perusahaan Hailun berinvestasi dalam peralatan digital Jepang dan lini produksi. Juga di tahun ini, kerjasama didirikan antara Hailun dan Wendl & Lung, Perusahaan berganti nama menjadi Hailun Alat Musik Co, Ltd. Pada tahun 2006 menghasilkan 12.070 piano, 10.500 uprights dan 1570 grands, juga membuat bangku piano, pada November 2006 mereka membuka markas baru dan showroom di Lilburn Amerika Serikat.1989Nama Danemann dijual kepada Piano Gardner di Cardiff dalam kaitannya dengan Badan Usaha Welsh.1989Piano Frazer diambil alih oleh Hellas.
1989Piano Broadwood dibuat di Bentley dibawah lisensi.1990Piano Chavanne didirikan di Perancis, membuat piano tegak berkualitas. Tinggi, 125 cm.1993Bentley, Broadwood dan Knight dimiliki oleh Welmars. David Grover dari Bentley pindah dengan mereka sebagai kepala penjualan di luar negeri.1995Sekitar saat ini, Pearl River Piano piano perusahaan Cina dan Yamaha dari Jepang membuat perusahaan patungan. Mereka mendirikan sebuah perusahaan bernama Yamaha-Pearl River. Perusahaan ini didirikan untuk memastikan “Eterna” model yang diekspor ke Eropa dan Amerika Serikat.1998Pada hari Sabtu, 12 Desember, Komisi Perdagangan Internasional AS memulai penyelidikan daya saing industri piano AS. Ini karena piano-piano import dari Cina, Jepang, Indonesia, dan Korea Selatan lebih dari 62.480 dalam sembilan bulan pertama tahun ini.2003Pada Desember 2003 Samsung meninggalkan piano Weber yang dibuat oleh Young Chang sejak 1984 dan sekarang memasarkan piano Cina di bawah nama Behning.
Sumber : http://www.rumahpiano.com/sejarah-penemuan-piano/
Piano adalah alat musik yang dimainkan dengan jari-jemari tangan. Pemain piano disebut pianis.
Pada saat awal-awal diciptakan, suara piano tidak sekeras piano abad XX-an, seperti piano yang
dibuat oleh Bartolomeo Cristofori (1655 – 1731) buatan 1720. Pasalnya, tegangan senar piano kala
itu tidak sekuat sekarang. Kini piano itu dipajang di Metropolitan Museum of Art di New York.
Meskipun siapa penemu pertama piano, yang awalnya dijuluki gravecembalo col piano e
forte (harpsichord dengan papan tuts lembut dan bersuara keras), masih menjadi perdebatan, banyak
orang mengakui, Bartolomeo Cristofori sebagai penciptanya. Piano juga bukan alat musik pertama
yang menggunakan papan tuts dan bekerja dengan dipukul. Alat musik berprinsip kerja mirip piano
telah ada sejak 1440.
Piano sendiri lahir dari keinginan untuk menggabungkan keindahan nada clavichord dengan kekuatan
harpsichord. Hasrat itu mendorong Mariusdari Paris (1716), Schroter dari Saxony (1717),
dan Christofori (1720) dari Padua, Italia, untuk membuat piano. Namun, hasil utuh dan lengkap cuma
ditunjukkan Bartolomeo Christofori. Dari piano ciptaan pemelihara harpsichord dan spinet
(harpsichord kecil) di Istana Florentine - kediamanPangeran Ferdinand de’Medici - inilah piano
modern berakar.
Pada pertengahan abad XVII piano dibuat dengan beberapa bentuk. Awalnya, ada yang dibuat mirip
desain harpsichord, dengan dawai menjulang. Piano menjadi lebih rendah setelah John Isaac
Hawkins memodifikasi letaknya menjadi sejajar lantai. Lalu, dengan munculnya tuntutan instrumen
musik lebih ringan, tidak mahal, dan dengan sentuhan lebih ringan, para pembuat
piano Jerman menjawabnya dengan piano persegi. Sampai 1860 piano persegi ini mendominasi
penggunaan piano di rumah.
Rangka untuk senar piano pertama menggunakan rangka kayu dan hanya dapat menahan tegangan
ringan dari senar. Akibatnya, ketika pada abad XIX dibangun gedung-gedung konser berukuran
besar, suara piano tadi kurang memadai. Maka, mulailah dibuat piano dengan rangka besi. Sekitar
tahun 1800 Joseph Smith dari Inggris membuat suatu piano dengan rangka logam seluruhnya. Piano
hasil inovasinya mampu menahan tegangan senar sangat kuat, sehingga suara yang dihasilkan pun
lebih keras. Sekitar 1820, banyak pembuat menggunakan potongan logam untuk bagian piano
lainnya. Pada 1822, Erard bersaudara mematenkan double escapement action, yang merupakan
temuan tersohor dari yang pernah ada berkaitan dengan cara kerja piano.
Dalam perkembangannya, sebelum memiliki 88 tuts seperti sekarang, piano memiliki lima oktaf dan
62 tuts. Ia juga dilengkapi dengan pedal. Semula pedal itu digerakkan dengan lutut. Namun,
kemudian pedal kaki yang diperkenalkan di Inggris menjadi populer hingga sekarang.
Sejumlah pengembangan berlanjut pada abad XIX dan XX. Tegangan senar, yang semula ditetapkan
16 ton pada tahun 1862, bertambah menjadi 30 ton pada piano modern. Hasilnya adalah sebuah
piano dengan kemampuan menghasilkan nada yang tidak pernah dibayangkan Frederic
Chopin, Ludwig van Beethoven, dan bahkan Franz Liszt.
Notasi piano
Sebuah perkembangan nyata di abad XX (berawal di tahun 1930-an) adalah kehadiran piano
elektronik (atau piano listrik), yang didasarkan pada teknologi elektroakustik atau metode digital.
Nada suaranya terdengar melalui sebuah amplifier dan loudspeaker.
Dari sisi mutu suara, piano elektronik nyaris tak ada bedanya dengan piano biasa. Perbedaan terletak
pada berbagai fitur yang melengkapinya. Fitur itu tentu tidak ada sama sekali dalam piano biasa.
Misalnya, bisa dihubungkan dengan perangkat MIDI, komputer, alat rekam; memiliki pengatur
volume, tusuk kontak untuk pendengar kepala; dan sebagainya.
Sumber : http://id.wikipedia.org/wiki/Piano
Piano Kelas Dunia Buatan Dari Indonesia
Indonesia buat kejutan! Sekarang dikenal sebagai negara pengekspor piano berkualitas tinggi. Terlebih lagi alat
musik buatan negeri tropis ini laku keras di Amerika Serikat! Setiap bulan sedikitnya 50 upright piano diekspor ke
negara adikuasa AS dari Cikarang, Jawa Barat.
Pemesannya tidak tanggung-tanggung, pabrik piano Boston, label kedua dari merek terkenal dunia, Steinway &
Sons, Rolls-Royce-nya piano! “Boston Piano sangat puas atas kualitas piano buatan Indonesia yang diekspor ke
Amerika Serikat,”.
Pabrik di Cikarang direkomendasi pabrik Kawai Jepang kepada Boston sewaktu tahun lalu pabrik piano AS ini
mencari pabrik di luar benua Amerika untuk memproduksi pianonya. Rekomendasi tersebut tidak lain, karena
Kawai sangat puas atas produksi Cikarang, tidak meragukan sedikit pun untuk menyarankan piano Boston
dengan moto “Affordable high-quality piano” diproduksi di Indonesia.
Selain AS, Eropa juga mengimpor upright piano Kawai dari Cikarang berlabel “Made in Indonesia”. Total setiap
bulan pabrik penanaman modal asing (PMA) dari Kawai Musical Instrument Manufacturing Company berpusat di
Hamamatsu, sekitar 300 kilometer dari Tokyo, mengekspor 500 piano dari kawasan industri Cikarang.
Sementara ke pabrik pusatnya di Hamamatsu, Cikarang mengirim setiap bulan 1.500 soundboard lengkap ke
Jepang.
“Local content-nya 60 persen buatan Indonesia,”. Komponen lokal tersebut di antaranya iron frame piano terbuat
dari casting iron (besi cor) seberat 85 kilogram untuk penyangga string atau kawat senar piano dibuat di Pulo
Gadung. Kabinet piano dipesan dari pabrik furniture di kawasan Cikarang. Bahan baku kayu lapis khusus bagi
salah satu komponen piano dari Jambi, Kalimantan, dan Sulawesi.
Komponen iron frame harus prima dibuat sebab fungsinya sebagai penyangga dari tekanan kawat senar piano,
harus mampu menahan tekanan sekitar 20 ton. Sebuah piano dilengkapi dengan 230 senar, setiap senar
mempunyai tekanan sekitar 72,7 kg sehingga komponen tersebut harus mampu menahan tekanan sekitar
16.300 kg untuk upright piano atau sekitar 27.180 kg bagi grand piano.
Adapun komponen soundboard merupakan bagian terpenting dari sebuah piano yang memengaruhi mutu suara,
terbuat dari kayu spruce, tebalnya sekitar 1 sentimeter. Komponen ini dilekatkan pada frame buatan Pulo
Gadung tersebut.
“Komponen yang didatangkan dari Jepang hanya action mechanic, keyboard, dan pedalnya,”.
Untuk mengantisipasi peningkatan pesanan dari dunia internasional, pabrik Kawai Indonesia yang mulai
dibangun Maret 2001 dan berproduksi Januari 2002 dengan investasi 4,5 juta dollar AS saat ini memperluas
pabriknya dengan mendirikan unit untuk produksi grand piano dengan investasi sama, 4,5 juta dollar AS, atau
total pabrik Kawai Jepang menanam modal sebesar 9 juta dollar AS di Cikarang.
Investasi lain adalah mengirim tenaga Indonesia ke pabrik Kawai di Jepang. “mendalami assembling dan
finishing selama tiga tahun di Jepang,”
Seorang tenaga wanita lulusan SMA yang melakukan shitaritsu atau penyetelan senar pertama (first tuner), juga
pernah dikirim untuk mendalami bidangnya selama kurun waktu sama. Secara periodik, sejumlah karyawan
dikirim ke pusat Kawai di Hamamatsu selama satu bulan.
Tidak ada satu pun piano Kawai buatan Indonesia dari Cikarang dipasarkan di negeri khatulistiwa ini. Dari
kawasan berikat Cikarang, piano langsung diekspor ke luar negeri. Karena itu, yang beredar di Tanah Air adalah
piano impor dari Jepang, seperti yang dipamerkan di ruang pajang Kawai (diresmikan 1 November) yang dikelola
PT Modern Photo Tbk sebagai distributornya. Salah satunya adalah seri Vari-Touch VT-132, piano pertama di
dunia dengan tuas variable touch control untuk mengatur atau mengubah bobot/berat sentuhan keyboard (tuts).
“Orang Indonesia lebih menyukai buatan luar negeri, kurang menghargai produk negeri sendiri,”. Padahal,
kualitas mutu produk dalam negeri sudah tinggi, sama dengan produk luar negeri. Salah satu contoh yang
diberikan adalah piano Boston buatan Cikarang. Karena itu, seandainya piano buatan Cikarang diizinkan
dipasarkan di Indonesia, piano Cikarang disangsikan akan selaku kacang goreng seperti di pasar Amerika
Serikat. Ironis sekali, katanya.
Selain pasarnya masih kecil, sejarah pembuatan piano di Tanah Air masih berusia seumur jagung. Sedikitnya
baru ada dua perusahaan, yakni Kawai di Cikarang dan Yamaha di Pulo Gadung. Keduanya pun dari Jepang.
Sementara di negeri sakura, selain pabrik raksasa Yamaha (produsen piano nomor dua di dunia, 130.000 unit
per tahun) dan Kawai (nomor dua di Jepang, 70.000 piano per tahun), ada ratusan pabrik kecil dan industri
rumah yang turut membanjiri pasar piano negeri matahari terbit tersebut.
Gitu donk…sekarang tunjukkan lagi kreatifitas bangsa indonesia.
[sanshiro, sumber: kompas ‘04]
The piano may be the best known and loved of all musical instruments. It
also has the broadest range of any instrument, so music for all other
instruments can be composed on it. It can be played solo, but most other
instruments, including the voice, use the piano for accompaniment.
Technically, the piano may also be the most complicated musical
instrument with over 2,500 parts.
The piano is a stringed instrument. Its many parts are organized into five
general structural and mechanical areas of either grand or vertical
pianos. These are: the case of the wing-shaped grand piano (or the
cabinet of the vertical or upright piano); the soundboard and the ribs and
bridges that are its components; the cast iron plate; the strings; and,
collectively, the keys, hammers, and piano action or mechanism. The
case has many structural parts for attaching legs and tuning pins, but
perhaps the rim and the keybed or shelf where the keys and piano action
will be installed are most important. The soundboard amplifies the
vibrations of the strings, which are transmitted through bridges.
The cast iron plate is installed over the soundboard and pinblock (part of
the case), and it provides the strength to anchor the strings under
tension. Nose bolts and perimeter bolts anchor the plate to the braces
and inner rim of the case. The 220 to 240 strings of the piano are
attached to hitch pins along the curved edge of the cast iron plate and to
tuning pins across the front of the piano, roughly parallel to the
keyboard. The piano action is still more complicated and includes the
keys, hammers, and mechanism or action.
Names for pianos usually indicate their sizes. Grand (wing-shaped)
pianos range in length from 4 ft 7 in-9 ft 6 in (1.4-2.9 m) from the front of
the keyboard to end of the bend. The "baby" grand is 5 ft-S ft 2 in (1.52-
1.57 m) in length; smaller grand pianos are called "apartment size." The
larger sizes are the medium grand and concert grand. Modern vertical
piano design has changed little since 1935. Verticals range in height
from 36-52 in (91-132 cm) with small variations in width and depth. The
five standard sizes from smallest to tallest are the spinet, consolette,
console, studio, and professional pianos. Pianos are frequently chosen for
appearance, and cabinets are available in most furniture styles and
finishes.
History
The piano's ancestors are the first stringed instruments. Plucking,
striking, and bowing of strings was known among all ancient civilizations;
the harp is mentioned in the Book of Genesis in the Bible. The psaltery
was an ancient box-type instrument with strings that were plucked with a
pick. Keys were added to stringed instruments to make the family of
instruments led by the harpsichord, but keys are used to pluck strings in
the harpsichord, the most popular instrument of the seventeenth century.
A parallel development was the dulcimer, another stringed box with
strings that are struck. Keys and strings were paired in a striking
instrument in the clavichord, which led directly to the invention of the
pianoforte or fortepiano.
Bartolomeo de Francesco Cristofori made harpsichords in Padua, Italy.
He is credited with having invented the piano in 1700. Cristofori's piano
had hammers that struck the strings by falling by momentum, after
having been moved by the action parts linking the hammers to the keys.
The hammers were caught by back checks or hammer checks to keep
them from bouncing up and down on the strings after the initial strike.
This method allowed the strings to continue to vibrate and make sound
and for them to be struck loudly or softly, unlike the harpsichord. Johann
Andreas Silbermann of Strasbourg, France, continued Cristofori's
interest in the pianoforte, and the instrument became popular in
Germany after Frederick the Great purchased several. Johann Sebastian
Bach approved of it in 1747.
The piano had replaced the harpsichord in importance by the end of the
eighteenth century. Cabinetmakers built beautiful cases for them. The
square piano was built mid-century, and more musicians began writing
music specific to the piano, rather than borrowing harpsichord tunes.
Piano building began in America in 1775, and changes to the design of
the hammers and to the playing mechanism or action improved the sound
and responsiveness of the instrument. Jean Henri Pape of Paris patented
137 improvements for the piano during his life (1789-1875). In England,
John Broadwood developed machines to manufacture pianos and reduce
their cost.
Improvements continued from 1825 to 1851 with over 1,000 patents in
Europe and the United States for stronger, more deft pianos with greater
control and repetitive motion. By the mid-nineteenth century, the modern
piano had emerged based on the development of the cast iron plate for
structural strength and cross-stringing by fanning bass strings over
trebles. By 1870, Steinway & Sons had developed this fanning method
called the over-strung scale, so that the strings crossed most closely in
the center of the soundboard where the best sound is produced.
Advertisement for a Beckwith player piano from the 1915 Sears Roebuck
catalog.
(From the Collections of Henry Ford Museum & Greenfield Village.)
In the early twentieth century, the player piano achieved great
popularity, allowing people to feel artistic and produce music in their
homes without having to invest endless hours in practice. The pianos,
equipped with a built-in player mechanism, were activated by foot pedals
or electricity and used perforated paper rolls to play a variety of music.
Manufacturers advertised their player pianos as good family
entertainment and a source of cultural enrichment. An eager public
responded with enthusiasm, purchasing over two million pianos by the
end of the 1920s. Parents hoped that the pianos would interest their
children in attaining musical skills—although they often had the opposite
effect, since player pianos offered, as one manufacturer described it,
"perfection without practice."
Dealers offered music rolls for a broad range of age groups, musical
tastes, and interests. Young adults sang along with the latest tunes, while
musical versions of nursery rhymes enchanted toddlers. Classical music
enthusiasts listened to sonatas or operatic melodies. Many Greek, Italian,
and Polish-Americans purchased song rolls with words printed in their
native language.
Coin-operated player pianos were popular among hotel, dance hall, and
restaurant owners, who purchased them to serenade customers and
increase profits. Fitted with rolls that played several tunes, these pianos
poured forth music at the drop of a coin. Customers glided across dance
floors to waltzes and fox trots, dined in restaurants to popular melodies,
or drank in speakeasies to uptempo tunes.
The enthusiasm for player pianos began to wane in the late 1920s,
however, as phonographs and radio provided keen competition for
leisure time and entertainment dollars.
Jeanine Head Miller
C. F. Theodore Steinway also developed the continuous bent rim for the
case, which enhanced sound transmission by using the acoustic
properties of long wood fibers. These improvements were adapted to all
styles of pianos including grand, upright, and square pianos. By 1911,
there were 301 piano builders in the United States. Production peaked in
the 1920s and declined greatly because of the Great Depression in the
1930s. Today, there are approximately 15 piano manufacturers in the
United States, and Japan is the world's largest producer of pianos.
The design of the piano has not changed appreciably since the late
1800s, although manufacturers may use different materials or
approaches to the manufacturing process. The manufacturing process for
the grand piano is described below; there are some differences in
manufacturing the vertical or upright piano and in operation methods,
particularly the angle at which the hammers strike the strings.
Raw Materials
Pianos are made of the finest materials, not only for appearances but for
excellent sound production. The long fibers of maple wood are strong and
supple for construction of the rim, but long fibers of spruce are needed
for the strength of the braces. Wood is also needed for making patterns
of other parts. Metal is used for a variety of parts, including the cast iron
plate. Sand is needed for casting molds. The character of the sand is
modified by using additives and binders such as bentonite (a type of clay)
and coal dust. Molten iron for the casting is made of pig iron with some
steel and scrap iron to add strength. Strings are made of high tensile
steel wire that is manufactured at specialized piano string mills.
Design
Pianos are designed by specially trained and educated engineers called
scale engineers. Scale engineers choose the materials, create the designs
and specifications, and develop the interactions of the parts of the piano.
Perhaps the most important aspect of design relates to the structural
strength of the piano. About 160-200 lb per sq in (11.2-14 kg per sq cm)
of tension is exerted on each of the 220 or more strings in the piano. The
piano must perform well, but it also must remain stable over time as
changing conditions affect the many materials in the piano differently.
The cast iron plate must support the tension of the stringing scale,
covering the sound-board very little; it must have maximum mass for
strength, but minimum mass for sound quality. Its shape is unique to the
design of the piano because it conforms to the string layout, the
placement of the bridges on the soundboard, and the paths of the strings.
Because the material is brittle, it must be supported in places where the
strings apply tension. Holes are designed in the curved side to prevent
the plate from cracking due to thermal stress after it is poured and
cooled, and this design allows sound to rise from the soundboard too. The
scale engineer first sketches a proposed plate, draws it to scale, and
makes a wood pattern; this design is later used for manufacture.
The Manufacturing Process
Bending the rim of the case
1 Steinway's method of rim bending is still used and is the first step
in assembling the grand piano. Layers of long-fiber maple wood are
glued together and bent in a metal press to form a continuous rim;
both the inner and outer rim are made this way. Up to 22 layers
form each piano rim, and the layers may be up to 25 ft (7.62 m)
long. Resin glue is applied by machine, then the layers are carried
to the press where they are shaped. The rims are stored in braces
to keep them from changing shape. They are seasoned in controlled
temperature and humidity conditions until the wood meets a
specific moisture content where it will hold its contour. The bent
inner rim is then fitted with other wood components, including the
cross block, the pinblock, the cross braces, the keybed, and the
backbottom. These are glued and doweled in place.
2 The cabinet is finished to improve sound properties as well as for
appearance. The cabinet is sanded so stain is absorbed properly,
wood is bleached to equalize appearance of the veneer, prestaining
and staining are done next, wood fillers (sometimes with a
washcoat) are added, and a first coat of sealer or lacquer is
applied. The surface is sanded again, special glazes (for antiquing
or other effects) are added followed by two more coats of lacquer,
sanding is done again, special trims are added, and two final coats
of lacquer are used. The cabinet is dried for up to 21 days before it
is hand-rubbed to its final finish.
Making the structural components
3 The wood components of the piano (collectively called the
framework)—the pinblock and the cast iron plate—are the parts of
the piano that support the tension of the strings. Braces are made
of select spruce, and the pinblock or wrestplank is constructed of
bonded layers of rock maple. The pinblock is quarter-sawn or
rotary cut to maximize the grain structure's grip on the tuning pins.
The laminated layers are also glued at different angles to each
other so that the pins are surrounded with end grain wood. The
pinblock has one hole per string, or up to 240 holes, drilled in it.
4 The cast iron plate is made in a piano plate foundry. Match-plates
are made of metal from the wood pattern designed by the engineer
with top and bottom pieces to match. Sand molds are made from
the match-plates, and these are used to cast the plate. Molten iron
is poured through the molds and allowed to harden during the
founding process (a controlled cooling process) to produce a plate
weighing about 600 lb (272.4 kg). After the plate is cooled and
removed from the molds, sand is blasted off the plate with steel
grit. The plate is transported on overhead conveyors to a drill room
where holes are drilled for the tuning pins, nosebolts, bolts to the
frame, and hitch pins. The hitch pins are inserted next; then the
casting imperfections are removed from the plate by grinding and
drilling. Oils are also removed. The plate is hand-sanded and
rubbed, primed, and painted.
5 The cast iron plate is suspended above its piano during the
process of fitting. The plate will be lowered and raised in and out of
the piano several times as the pinblock, seal against the rim, and
the sound-board and bridges are fitted.
Creating the soundboard
6 The soundboard is a thin panel of spruce that underlies the
strings and the cast iron plate and rests on the rim braces. Its parts
are the board itself, supporting ribs on the underside of the board,
and the two bridges over which the strings are stretched. The
soundboard is made of spruce that is 0.25-0.375 in (0.635-0.95 cm)
thick; it acts as a natural resonator, is strong for its weight, and
can be vibrated by the strings because of its lightness. Spruce is air
dried then kiln dried to a specific moisture content. It is then cut
into strips that are 2-5 in (5.08-12.7 cm) wide, the edges are glued,
and the strips are pressed together and dried. A pattern is
superimposed, and the soundboard is trimmed to grand piano size.
7 The soundboard is curved to produce the right sound. The curve
is called a crown that arches upward toward the strings. The arch
is made by fitting ribs of lightweight spruce or sugar pine wood to
the underside of the board. The ribs are carefully cut from
patterns, then fitted and glued to the sound-board using a rib press
that accurately positions the ribs, then forces the board into the
proper curvature. The ribs are cut along the wood's lengthwise
grain and fitted at right angles to the lengthwise grain of the
sound-board, so that vibrations are evenly transmitted. The ends of
the ribs are feathered, then fitted into notches in the framework of
the piano that will exactly support the arch of the crown; the
pianomakers use special patterns to guide these cuts in the frame.
8 The two soundboard bridges transfer the vibrations of the strings
along their lengths to the soundboard. The long bridge is crossed
by treble strings, and the bass strings that fan across the trebles
cross the short bridge. The bridges are complicated because they
must parallel the grain of the soundboard closely, curve with the
crown, and support the strings, which exert a down-bearing
pressure on the bridges and therefore on the soundboard. This
pressure must be supported by the strength of the bridges and the
arch of the crown, or the tone of the strings will drop. The bridges
are made of solid blocks of wood or of laminated wood. Hard maple
is used in American-made pianos, and falcon wood (beech) is used
in Europe. Laminated bridges must be placed with laminations
perpendicular to the soundboard or the glue layers have a damping
effect. The bridges are glued to the soundboard and also fastened
to it with wood screws capped by soundboard buttons made of
wood that act like washers and keep the screws from grinding into
the board. The bridges are notched on both
Pianos have the greatest range of any instrument and over 2,500
parts. They are considered to belong to both the string family of
instruments, because a piano's strings produce its sounds, as well
as the percussion family, because the sound is produced when a
hammer strikes a string.
sides where each string crosses, so the string strikes a small part of
the bridge and can vibrate easily. Pins are inserted in the bridge,
and strings are threaded between the pins.
Stringing and tuning
9 Piano string is made in specialized mills and consists of carbon
steel wire. The bass strings are also wrapped with copper windings
in a process called loading the strings. The windings add weight
and thickness to the steel core strings so they vibrate more slowly
and can be made to lengths that fit a piano of practical size;
without loading, bass strings would have to be 30 ft (9.14 m) long
to produce their sounds. Treble strings are short, are not wound
with copper, but are grouped in threes to make one tone. Scale
sticks are used as standards for each string, acting as a gauge of
each kind of wire and determining how many sizes of string are
needed; up to 17 different diameters of wire may be used to string
one piano. Piano strings require special care and handling because
they lie straight after they are formed, cut, and loaded and are
never wound on rolls. After the strings are strung, they are held in
place near the tuning pins by metal bars and special brass studs
called agraffes. Other bars position the strings properly near the
hitch pins.
10 Tuning pins are made from steel wire. The wire is cut to the
proper length, the ends are shaped with a die, and the pins are
loaded in a tumbler where rough edges are smoothed away. The
tumbler empties them into a press where swags that fit tuning
hammers are formed at the tops of the pins. Holes for the strings
are drilled into the swagged ends of the pins, the pins are cleaned
of metal chips and oil, and nickel-plating is applied to the pins to
keep them from rusting. The pins are threaded to turn easily during
tuning, then they are subjected to controlled heating called
blueing, which oxidizes the outer surface of the threads of the pins
(where the nickel plating was removed during threading) so the
pins will grip the wood in the pinblock. Special machines insert
several pins at a time through the holes in the cast iron plate and
into the pinblock where they are fitted in place by hand.
Constructing the keyboard and action
11 Keyboards, key and action frames, and actions are made by
specialty manufacturers. The keys balance and pivot on a set of
either two or three rails that are covered with felt to prevent noise.
Guide pins for each key are inserted in the front or head rail and
the middle or balance rail. The keys themselves are made of
lightweight wood that is cut to size and dried in kilns. The keys are
covered with black or white plastic, although in the past ivory and
ebony were used. The plastic key covers are molded to cover a
group of keys that are later cut individually. Holes are drilled on
the undersides to fit the guide pins. Capstan screws are mounted
on the back edges of the keyboard extending inside the piano; the
action will be seated on these. The keys are now cut into 88
individuals, which are sanded and polished on the sides. The black
keys are also stained black before the black caps are glued on. The
keys are rematched to the keyframe, punchings resembling
washers are placed over the guide pins, and the keys are placed on
them.
12 The voice of the piano depends on the quality of the hammers.
Many materials from elkskin to rubber have been used over the
history of the piano, but today, hammers are covered with premium
wool felt of precision-graduated density. The felt is made by
specialists who begin with select wool that is carded, combed,
folded, and compressed into felt in tapered strips. The thinnest felt
is used for the treble hammers, while thick felt is used for the bass.
The core of each hammerhead is a wood molding, and an underfelt
and top felt are bonded in place with resin to cover the molding.
The hammerheads are made in long strips of the same size then
sliced into individual hammerheads by hand or automation. The
complete set of hammers is installed in the piano. The sound of the
piano is adjusted by a specially trained tuner called a voicer. The
key actions must respond with the same resistance. The felt
hammers are modified with a sticker or needler that retextures the
hammerheads and changes the sound.
13 The final parts are added, including the pedals and their
trapwork, the fall-board or key cover, the music rack, the hinges
and top lid, the topstick that supports the raised lid, and many
other details. All parts are carefully made so they fit tightly and do
not rattle or otherwise affect the sound of the instrument.
Quality Control
Pianos would not exist without quality control in all aspects of production
because the instruments are too sensitive and dependent on the
interaction of many parts and materials. For example, quality begins with
the scale engineer's design. Metallurgists check the metal content of the
iron plate; chemical analyses are made of the other contents, including
carbon, sulfur, phosphorus, and manganese. Temperature is also critical;
the molten iron is 2,750°F (1,510°C), and founding or hardening
temperatures are also carefully monitored. String is similarly controlled
and tested during manufacture for elasticity, resiliency, and tensile
strength.
The Future
The process of piano manufacturing has remained essentially the same
for a century, but scale engineers are always seeking new methods.
Vacuum casting has recently been used to produce cast iron plates with
smooth finishes requiring no grinding.
Read more: http://www.madehow.com/Volume-3/Piano.html#b#ixzz2NJdCi1PL
Pedal PianoThe pedal piano (or pedalier piano)[1] is a kind of piano that includes a pedalboard, enabling bass
register notes to be played with the feet, as is standard on the organ.[2]
There are two types of pedal piano: the pedal board may be an integral part of the instrument, using
the same strings and mechanism as the manual keyboard, or, less frequently, it may consist of two
independent pianos (each with its separate mechanics and strings) which are placed one above the
other, a regular piano played by the hands and a bass-register piano played by the feet.
History
The origins of the pedal piano are found in the pedal clavichord and pedal harpsichord, of which an
original of the former survives and the latter only survives in descriptions and modern reproductions.
The first citation of a clavichord with pedalboard appeared around 1460 in a section dedicated
tomusical instruments in an encyclopedic treatise written by the scholar Paulus Paulirinus (1413-
1471). Organists would use these instruments for practise when they had no-one available to work
the bellows for a church organ or, in the wintertime, to avoid having to practice on a church organ in
an unheated church. Johann Sebastian Bach owned a pedal harpsichord and his organ trio sonatas
BWV 525-530, Passacaglia and Fugue in C minor BWV 582, and other works sound well when played
on the instrument.[3]
Wolfgang Amadeus Mozart owned a fortepiano with independent pedals, built for him
in 1785 by Anton Walter. His father refers to this in a letter to his daughter on March 12, 1785. The
autographed manuscript of the Concerto in D minor K 466, composed the same year, shows a series
of chords for the left hand plus bass notes an octave lower, covering about 2 1/2 measures. Some
believe that the bass notes were intended for the pedal.[4] But there is disagreement about this
interpretation. The additional bass notes could be regarded as a revision, where the original was not
crossed out. And since the pedal was strictly for his own, largely extemporaneous, use there would be
no reason to write out notes.
Louis Schone made a pedalflügel for Robert Schumann in 1843, when he was in Dresden. Schumann
preferred an upright pedal piano; his pedal keyboard had 29 notes and was connected with an action
placed at the back of the piano where a special soundboard, covered with 29 strings, was built into
the case. Schumann wrote much music for the pedal piano and was so enthusiastic about the
instrument that he convinced Felix Mendelssohn, who owned a grand pedal piano, to form a class
devoted to it in the Leipzig Conservatory. Charles-Valentin Alkan owned an Erard pedal piano made
in 1853 and now in the Musée de la Musique, the historic instrument collection of the Conservatoire
de Paris. Alkan composed a number of works for it, in the virtuoso style to be found in his other piano
music.[5] Kevin Bowyer has revived some of this music in recent years, though he plays it on the
organ.
The instrument never became very popular in the 1900s, and it remains a rarity. It is mostly used to enable organists to practice at home, rather like the pedal harpsichord and clavichord were centuries ago, instead of being used to play the pedal piano repertoire. In the 2000s, pedal pianos are made in the Luigi Borgato workshop in Italy. This company makes the Doppio Borgato, an independent bass-register instrument connected to a pedal board, on which a concert grand can be placed. Borgato expanded the register of the bass piano to 37 notes (rather than the standard 30 or 32 on an organ).
http://en.wikipedia.org/wiki/Pedal_piano
Piano pedals are foot-operated levers at the base of a piano which change the instrument's sound in
various ways. Modern pianos usually have three pedals, from left to right, the soft pedal (or una
corda), the sostenuto pedal (mainly found in American-made grands), and the sustaining pedal (or
damper pedal). Some pianos omit the sostenuto pedal, or have a middle pedal with a different
purpose such as a muting function also known as silent piano.
The development of the piano's pedals is an evolution that began from the very earliest days of
the piano, and continued through the late nineteenth century. Throughout the years, the piano had as
few as one modifying stop, and as many as six or more, before finally arriving at its current
configuration of three.
Una corda pedal
Main article: Soft pedal
The una corda mechanism, invented by Bartolomeo Cristofori, was the first stop invented to modify
the piano's sound. This function is typically operated by the left pedal on modern pianos. The common
name many use today for the una corda is the soft pedal, which is not an entirely accurate description
of the pedal's function. The una corda primarily modifies timbre and color of the tone, not just the
volume of the tone.[1]
Soon after its invention, the una corda was integrated on pianos of all makers as a standard fixture.[2] On Cristofori's pianos, the una corda mechanism was operated by a hand stop, not a pedal. The
stop was a knob located on the side of the keyboard. When the una corda was activated, the entire
action shifted to the right so that the hammers hit one string (una corda) instead of two strings (due
corde).[3]
Dominic Gill says that when the hammers strike only one string, the piano "produces a softer, more
ethereal tone".[4]
By the late eighteenth century, piano builders had begun triple stringing the notes on the piano. This
change, affecting the una corda's function, is described by Joseph Banowetz:
On the pianos of the late eighteenth to early nineteenth centuries, the pianist could shift from the
normal three-string (tre corde) position to one in which either two strings (due corde) or only one (una
corde) would be struck, depending on the depth to which the pedal was pressed. This subtle but
important choice does not exist on modern pianos, but was readily available on the earlier
instruments.
—[2]
The sound of the una corda on early pianos created a larger difference in color and timbre than it
does on the modern piano. On the modern piano, the una corda pedal makes the hammers of the
treble section hit two strings instead of three. In the case of the bass strings, the hammer normally
strikes either one or two strings per note. The lowest bass notes on the piano are a single thicker
string. For these notes, the action shifts the hammer so that it strikes the string on a different, lesser-
used part of the hammer nose.[5]
Edwin Good states,
On the modern piano, the timbre is subtly different, but many people cannot hear it. In that respect, at
least, the modern piano does not give the player the flexibility of changing tone quality that early ones
did.
—[6]
Beethoven took advantage of the ability of his piano to create a wide range of tone color in two of his
piano works. In his Piano Concerto No. 4, Beethoven specifies the use of una corda, due corda, and
tre corde. He calls for una corda, then "poco a poco due ed allora tutte le corde", gradually two and
then all strings, in Sonata Op. 106.[2]
Half-blow pedal
On the modern upright piano, the left pedal is not truly an una corda, because it does not shift the
action sideways. This cannot happen because the strings "run at such an oblique angle to the
hammers that if the action were moved sideways, the hammer might strike one string of the wrong
note".[7] A more accurate term for the left pedal on an upright piano is the half-blow pedal. When the
pedal is activated, the hammers move closer to the strings, so that there is less distance for the
hammer to swing.[8]
Sostenuto pedal
The last pedal to be added to the modern grand was the middle pedal, the sostenuto, which was
inspired by the French. By using this pedal, a pianist can sustain selected notes, while other notes
remain unaffected. The sostenuto was first shown at the French Industrial Exposition of 1844 in Paris,
by Boisselot and Sons, a Marseille company. French piano builders Alexandre François
Debain and Claude Montal built sostenuto mechanisms in 1860 and 1862, respectively. These
innovative efforts did not immediately catch on with other piano builders. In 1874, Albert
Steinway perfected and patented the sostenuto pedal.[9] He began to advertise it publicly in 1876, and
soon the Steinway company was including it on all of their grands and their higher class uprights.[10]
Other American piano builders quickly adopted the sostenuto pedal into their piano design. The
sostenuto was never well-received in Europe, however. Today, the sostenuto is on few European-
made pianos, but it remains a standard fixture primarily on American-made grands.[7]
The term "sostenuto" is perhaps not the best descriptive term for what this pedal actually does.
"Sostenuto" in Italian means "sustaining".[1] This definition alone would make it sound as if the
sostenuto pedal accomplishes the same thing as the damper, or "sustaining" pedal. The sostenuto
pedal was originally called the "tone-sustaining" pedal.[10] That name would be more accurately
descriptive of what the pedal accomplishes, i.e. sustainment of a single tone / group of tones. Only a
handful of composers, including Claude Debussy, Maurice Ravel,[1] and Charles Griffes, call for the
use of this pedal; the sostenuto still remains the least used pedal of the three on the piano.
It is common to find uprights and even grand pianos that lack a middle pedal. Even if a piano has a
middle pedal, one cannot assume it is a true sostenuto, for there are many other functions a middle
pedal can have other than that of sostenuto. Often an upright's middle pedal is another half-blow
pedal, like the one on the left, except that the middle pedal will slide into a groove to stay engaged.
Sometimes, the middle pedal may only operate the bass dampers.[6] The middle pedal may
sometimes lower a muffler rail of felt between the hammers and the strings to mute and significantly
soften the sound, so that one can practice quietly (also known as a "Practice Rail").[8] True sostenuto
is rare on uprights, except for more expensive models such as those from Steinway and Bechstein.
They are more common on digital pianos as the effect is straightforward to mimic in software.[citation
needed]
Sustaining, or damper pedal
Main article: Sustain pedal
The sustaining pedal, the right pedal on the modern piano, has been called "the soul of the piano".[1] This pedal raises all the dampers off the strings so that they keep vibrating after a key on the
keyboard has been released. It adds much expressivity, allowing notes to resonate, and certain
harmonies and notes to be connected together.
Other pedals
Among other pedals sometimes found on early pianos are the lute stop, moderator or
celeste, bassoon, buff, cembalo, and swell. The lute pedal created a "pizzicato-type sound".[11] The
moderator, or celeste mechanism used "a layer of soft cloth or leather ... interposed between
hammers and strings to give a sweet, singing and muted quality".[4] According to Good, "[the piece of
leather or cloth was] graduated in thickness across its short dimension. The farther down one pushed
the pedal, the farther the rail was lowered and the thicker the material through which the hammer
struck the strings. With the thicker material, the sound was softer and more muffled. Such a stop was
sometimes called a pianissimo stop."[12]
The moderator stop was popular on Viennese pianos, and a similar mechanism is still sometimes
fitted on upright pianos today in the form of the practice rail (see Functions of the upright piano's
middle and left pedals, below). Joseph Banowetz states that for the bassoon pedal, paper or silk was
placed over the bass strings to create "a buzzing noise that listeners of the day felt resembled the
sound of the bassoon".[13] The buff stop and cembalo stops seem to be similar to each other in method
of manipulation and sound produced. The buff ("leather") stop[12] used "a narrow strip of soft leather ...
pressed against the strings to give a dry, soft tone of little sustaining power".[4] The cembalo stop
pressed leather weights on the strings and modified the sound to make it resemble that of
the harpsichord.[14] Johannes Pohlmann used a swell pedal on his pianos to raise and lower the lid of
the piano to control the overall volume.[15] Instead of raising and lowering the lid, the swell was
sometimes operated by opening and closing slots in the sides of the piano case.[14]
Often called "the father of the pianoforte"[by whom?], Muzio Clementi was a composer and musician who
founded a piano-building company, and was active in the designing of the pianos that his company
built. The Clementi piano firm was later renamed Collard and Collard in 1830, two years before
Clementi's death. Clementi added a feature called a harmonic swell.
"[This pedal] introduced a kind of reverberation effect to give the instrument a fuller, richer sound. The
effect uses the sympathetic vibrations set up in the untuned non-speaking length of the strings. Here
the soundboard is bigger than usual to accommodate a second bridge (the 'bridge of
reverberation')."[16]
The Dolce Campana pedal pianoforte c. 1850, built by Boardman and Gray, New York, demonstrated
yet another creative way of modifying the piano's sound. A foot pedal controlled a series of hammers
or weights attached to the soundboard that would fall onto an equal number of screws, and created
the sound of bells or the harp.[17]
Novelty pedals
In the early years of piano development, many novelty pedals and stops were experimented with
before finally settling on the three that now grace the modern piano. Some of these pedals were
meant to modify levels of volume, color, or timbre, while others were used for special effects, meant to
imitate other instruments. Banowetz speaks of these novelty pedals: "At their worst, these
modifications threatened to make the piano into a vulgar musical toy".[2]
Janissary or Janizary pedals
During the late eighteenth century, Europeans developed a love for Turkish band music, and
the Turkish music style was an outgrowth of this. According to Good, this was possibly started
"whenKing Augustus the Strong of Poland received the gift of a Turkish military band at some time
after 1710".[18] "Janissary" or "janizary"" refers to the Turkish military band that used instruments
including drums, cymbals, and bells, among other loud, cacophonous instruments. Owing to the
desire of composers and players to imitate the sounds of the Turkish military marching bands, piano
builders began including pedals on their pianos by which snare and bass drums, bells, cymbals, or the
triangle could be played by the touch of a pedal while simultaneously playing the keyboard.[19]
Up to six pedals would control all these different sound effects. Alfred Dolge states, "The Janizary
pedal, one of the best known of the early pedal devices, added all kinds of rattling noises to the
normal piano performance. It could cause a drumstick to strike the underside of the soundboard, ring
bells, shake a rattle, and even create the effect of a cymbal crash by hitting several bass strings with a
strip of brass foil".[19] Mozart's Rondo alla Turca, from Sonata K. 331, written in 1778, was sometimes
played using these Janissary effects.[20]
Development
Hand stops
The sustaining, or damper stop, was first controlled by the hand, and was included on some of the
earliest pianos ever built. Stops operated by hand were inconvenient for the player, who would have
to continue playing with one hand while operating the stop with the other. If this was not possible, an
assistant would be used to change the stop, just as organists do even today.[21] Johannes Zumpe 's
square piano, made in London in 1767, had two hand stops located inside the case, which acted as
sustaining stops for the bass strings and the treble strings.[21]
Knee levers
The knee lever to replace the hand stop for the damper control was developed in Germany sometime
around 1765.[2] According to David Crombie, "virtually all the fortepianos of the last three decades of
the eighteenth century were equipped with a knee lever to raise and lower the dampers ... ".[22]
Sometime around 1777, Mozart had an opportunity to play a piano built by Johann Andreas Stein,
who had been an apprentice of Gottfried Silbermann. This piano had knee levers, and Mozart speaks
highly of their functionality in a letter: "The machine which you move with the knee is also made better
by [Stein] than by others. I scarcely touch it, when off it goes; and as soon as I take my knee the least
bit away, you can't hear the slightest after-sound".[23]
The only piano Mozart ever owned was one by Anton Walter, c. 1782-1785. It had two knee levers;
the one on the left raised all the dampers, while the one on the right raised only the treble dampers. A
moderator stop to produce a softer sound (see Other pedals, below) was located centrally above the
keyboard.[24]
Foot pedals
Although there is some controversy among authorities as to which piano builder was actually the first
to employ foot pedals rather than knee levers, one could say that foot pedals are a characteristic first
developed by manufacturers in England.[25] James Parakilas states that the damper stop was
introduced by Gottfried Silbermann,[3] who was the first German piano builder.[26]Parakilas, however,
does not specify whether Silbermann's damper stop was in the form of a hand lever, knee lever, or
foot pedal. It is of importance to note here that many successful English piano builders had
apprenticed with Silbermann in Germany, and then left for London as a result of the disturbances of
the Seven Years War in Saxony. Among those who re-located to England were Johannes
Zumpe, Americus Backers, and Adam Beyer.[27] Americus Backers, Adam Beyer, and John
Broadwood, all piano builders in England, are credited as being among the first to incorporate the new
feature. Americus Backers' 1772 grand, his only surviving instrument, has what are believed to be
original pedals, and is most likely the first piano to use foot pedals rather than knee levers.[28] A square
piano built by Adam Beyer of London in 1777 has a damper pedal, as do pianos built by John
Broadwood, ca. 1783.[1]
After their invention, foot pedals did not immediately become the accepted form for piano stops.
German and Viennese builders continued to use the knee levers for quite some time after the English
were using foot pedals. Knee levers and foot pedals are even used together on the same instrument
on a Nannette Streicher grand built in Vienna in 1814. This piano had two knee levers which
were Janissary stops for bell and drum, and four foot pedals for una corda, bassoon, dampers, and
moderator.[29]
Beethoven and pedals
Throughout his lifetime, Ludwig van Beethoven owned several different pianos by different makers, all
with different pedal configurations. His pianos are fine examples of some experimental and innovative
pedal designs of the time. In 1803, the French piano company Erard gave him a grand, "[thought to
be] the most advanced French grand piano of the time .... It had ... four pedals, including an una-
corda, as well as a damper lift, a lute stop, and a moderator for softening the tone".[30]
Beethoven's Broadwood grand, presented as a gift to him from the Broadwood company in 1817, had
an una corda pedal and a split damper pedal — one half was the damper for the treble strings, the
other was for the bass strings.[31] In an effort to give Beethoven an instrument loud enough for him to
hear when his hearing was failing, Conrad Graf designed an instrument in 1824 especially for
Beethoven with quadruple stringing instead of triple. Graf only made three instruments of this nature.
David Crombie describes this instrument: "by adding an extra string, Graf attempted to obtain a tone
that was richer and more powerful, though it didn't make the instrument any louder than his
Broadwood".[32] This extra string would have provided a bigger contrast when applying keyboard-
shifting stops, because this keyboard shift pedal moved the action from four to two strings. Crombie
states, "these provide a much wider control over the character of the sound than is possible on Graf's
usual instruments".[32] This piano had five pedals: a keyboard shift (quad to due corde), bassoon,
moderator 1, moderator 2, and dampers.[32]
As a composer and pianist, Beethoven experimented extensively with pedal. His first marking to
indicate use of a foot pedal in a score was in his first two piano concertos, in 1795. Earlier than this,
Beethoven had called for the use of the knee lever in a sketch from 1790–92; "with the knee" is
marked for a series of chords. According to Joseph Banowetz, "This is the earliest-known indication
for a damper control in a score".[33] Haydn did not specify its use in a score until 1794. All in all, there
are nearly 800 indications for pedal in authentic sources of Beethoven's compositions, making him by
far the first composer to be highly prolific in pedal usage.[34]
Pedal piano
Along with the development of the pedals on the piano came the phenomenon of the pedal piano, a
piano with a pedalboard. Some of the early pedal pianos date back to 1815.[10] The pedal piano
developed partially for organists to be able to practice pedal work away from the organ. In some
instances, the pedal piano was actually a special type of piano with a built-in pedal board and a higher
keyboard and bench, like an organ. Other times, an independent pedal board and set of strings could
be connected to a regular grand piano.
Mozart had a pedalboard made for his piano. His father, Leopold, speaks of this pedalboard in a
letter: "[the pedal] stands under the instrument and is about two feet longer and extremely heavy".[24]
Alfred Dolge writes of the pedal mechanisms that his uncle, Louis Schone, constructed for
both Robert Schumann and Felix Mendelssohn in 1843.[35] Schumann preferred the pedal board to be
connected to the upright piano, while Mendelssohn had a pedal mechanism connected to his grand
piano. Dolge describes Mendelssohn's pedal mechanism: "The keyboard for pedaling was placed
under the keyboard for manual playing, had 29 notes and was connected with an action placed at the
back of the piano where a special soundboard, covered with 29 strings, was built into the case".[35]
In addition to using his pedal piano for organ practice, Schumann composed several pieces
specifically for the pedal piano. Among these compositions are Six Studies Op. 56, Four Sketches Op.
58, and Six Fugues on Bach Op. 60.[36] Other composers who used pedal pianos were Mozart, Liszt,
and Gounod.[37]
The piano, and specifically the pedal mechanism and stops underwent a lot of experimentation during
the formative years of the instrument, before finally arriving at the current pedal configuration.
Banowetz states, "These and a good number of other novelty pedal mechanisms eventually faded
from existence as the piano grew to maturity in the latter part of the nineteenth century, finally leaving
as survivors of this torturous evolution only today's basic three pedals".[13]
Location
The location of foot pedals on the piano was another aspect of pedal development that fluctuated
greatly during the evolution of the instrument. Piano builders were quite creative with their pedal
placement on pianos, which sometimes gave the instruments a comical look, compared to what is
usually seen today. The oldest surviving English grand, built by Backers in 1772, and
manyBroadwood grands had two foot pedals, una corda and damper, which were attached to the legs
on the left and right of the keyboard.[28] James Parakilas describes this pedal location as giving the
piano a "pigeon-toed look",[3] for they turned in slightly. A table piano built by Jean-Henri Pape in the
mid-nineteenth century had pedals on the two front legs of the piano, but unlike those on the Backers
and Broadwood, these pedals faced straight in towards each other rather than out.[17] A truly unique
design is demonstrated in the "Dog Kennel" piano. It was built by Sebastien Mercer in 1831, and was
nicknamed the "Dog Kennel" piano because of its shape.[38] Under the upright piano where the
modern pedals would be located is a semi-circular hollow space where the feet of the player could
rest. The una corda and damper pedals are located at the left and right of this space, and face straight
in, like the table piano pedals. Eventually during the nineteenth century, pedals were attached to a
frame located centrally underneath the piano, to strengthen and stabilize the mechanism. According
to Parakilas, this framework on the grand piano "often took the symbolic shape and name of a lyre",[3] and it still carries the name "pedal lyre" today.
Recent development in pedal configuration
See also: Innovations in the piano
Although the piano and its pedal configuration has been in its current form since the late nineteenth
century, there is a possibility that sometime in the future the pedal configuration may change again. In
1987, the Fazioli piano company in Sacile, Italy, designed the longest piano made until this time (10 ft,
2 in.). This piano has four pedals: damper, sostenuto, una corda, and half-blow.[8]
Sumber : http://en.wikipedia.org/wiki/Piano_pedals