Penguapan Pengembunan 5 2
-
Upload
dhiyaul-ihsanti -
Category
Documents
-
view
234 -
download
0
Transcript of Penguapan Pengembunan 5 2
-
8/20/2019 Penguapan Pengembunan 5 2
1/18
Penguapan-pengembunan
-
8/20/2019 Penguapan Pengembunan 5 2
2/18
Kesetimbangan materi
• Komposisi ---------- tekanan parsial
• Diketahui tititk embun air dalam gas Tekanan parsial uap air
dalam gas
• Gas jenuh didinginkan pada tekanan tetap, fraksi mol uap air dan
gas tetap konstan sampai tercapai titik embun, pada pendinginan
selanjutnya semakin banyak air yang mengembun. Pada saatpendinginan dihentikan , gas tersebut masih jenuh dengan titik
embunnya yang baru
P!G"#!G
$D%"% &%'%(
K%)$ K"#!G
$D%"% P*+&%&
K%)$ &%'%(
-
8/20/2019 Penguapan Pengembunan 5 2
3/18
#nput output
• +assain . +olfraksiin % +assaout . +olfraksiout %
• +assain . Pi/P in % +assaout . Pi/P out %
-
8/20/2019 Penguapan Pengembunan 5 2
4/18
0ontoh-1
• %ir saturated 2ith 2ater 3apor at 4567 and 89:.5 mm (gabs. is passed through an air compressor and thenstored in a tank at ;:.5 psig and 4567.
-
8/20/2019 Penguapan Pengembunan 5 2
5/18
Step 5 'e3eral basis can be considered> 7 155 lb mol, P 155 lb mol,
< 155 lb mol, 7 89: lb mol, and so on, but 2e 2ill take
a tie component as a con3enient basis
&asis> 7 1.55 lb mol
-
8/20/2019 Penguapan Pengembunan 5 2
6/18
-
8/20/2019 Penguapan Pengembunan 5 2
7/18
0ontoh-;
• Toluene is e3aporated into dry air. The
resulting mi?ture at 9560 and a pressure
of 151.@kPa has a percentage saturation
of :5A. #t is desired to condense 45A of
the toluene in the mi?ture by a process ofcooling and compressing. #f the
temperature is reduced to :60, determine
the pressure to 2hich gas must becompressed.
-
8/20/2019 Penguapan Pengembunan 5 2
8/18
-
8/20/2019 Penguapan Pengembunan 5 2
9/18
-
8/20/2019 Penguapan Pengembunan 5 2
10/18
-
8/20/2019 Penguapan Pengembunan 5 2
11/18
0ontoh-@
• % constant-3olume 3essel contains dry air atBB67 and ;1.; psia. Cne pound of liuid 2ateris introduced into the 3essel. The 3essel isthen heated to a constant temperature of14567. %fter euilibrium is reached, the
pressure in the 3essel is @1.5 psia. The 3aporpressure of 2ater at 14567 is 8.:1 psia.• a. Did all of the 2ater e3aporate=• b. 0ompute the 3olume of the 3essel in cubic
feet.• c. 0ompute the humidity of the air in the3essel at the final conditions in pounds of2ater per pound of air.
-
8/20/2019 Penguapan Pengembunan 5 2
12/18
-
8/20/2019 Penguapan Pengembunan 5 2
13/18
-
8/20/2019 Penguapan Pengembunan 5 2
14/18
-
8/20/2019 Penguapan Pengembunan 5 2
15/18
0ontoh-9
• % silica gel drier remo3es 1555 kg of 2ater
per hour. %ir is supplied at a temperature
of ::60 and a de2 point of ;B.:60. The air
lea3es the drier at a temperature of @;60
and a de2 point of 8.;60. The pressure in
the system is constant at 155.5 kPa.
0alculate the 3olume of the 2et air at theinitial conditions 2hich is supplied per
hour.
-
8/20/2019 Penguapan Pengembunan 5 2
16/18
-
8/20/2019 Penguapan Pengembunan 5 2
17/18
-
8/20/2019 Penguapan Pengembunan 5 2
18/18
?ercise
% 1555 kg batch of a pharmaceutical
po2der containing : A by 2t 2ater is
dried in a double cone drier. %fter drying
E5 A of the 2ater has been remo3ed.0alculate the final batch composition and
the 2eight of 2ater remo3ed.