DAFTAR PUSTAKA

Abadi, D. S. 2011. Analisa Non Value Adding Activity dan Defect dengan Pendekatan

Lean Six Sigma di PT. Bayer Indonesia-Bayer Cropscience Surabaya. Jurnal

Internet: Universitas Pembangunan Nasional “Veteran”.

Arifin, Miftachul dan Hari S. 2012. Aplikasi Metode Lean Six Sigma Untuk Usulan

Improvisasi Lini Produksi Dengan Mempertimbangkan Faktor Lingkungan.

Studi Kasus: Departemen General Lighting Services PT. Philips Lighting

Surabaya. Jurnal Teknik ITS Vol. 1. Surabaya: Insitut Teknologi Sepuluh

November.

Breyfogle, Forrest W. 1999. Implementing Six Sigma: Smarter Solutions Using

Statistical Methods. New York: John Wiley & Sons Inc.

Cahyanti, Elok Rizki. 2013. Pengurangan Waste Pada Proses Produksi Botol X

Menggunakan Metode Lean Sigma. Jurnal Rekayasa dan Manajemen Sistem

Industri Vol. 1. Malang; Universitas Brawijaya.

Chrysler, Ford, and General Motors, 1995. Potential Failure Mode and Effects Analysis

(FMEA) Reference Manual. Chrysler Corporation, Ford Motors, General

Motors Corporation.

Gaspersz, Vincent. 2005. ISO 9001:2000 And Continual Quality Improvement. Jakarta:

PT Gramedia Pustaka Utama.

Gaspersz, Vincent. 2006. Contimous Cost Reduction Through Lean-Sigma Approach.

Jakarta: PT. Gramedia Pustaka Utama.

Gaspersz, Vincent. 2006. Total Quality Management (TQM) Untuk Praktisi Bisnis dan

Industri. Jakarta: PT. Gramedia Pustaka Utama.

Gaspersz, Vincent. 2007. Lean Six Sigma for Manufacturing and Services Industries.

Jakarta: PT. Gramedia Pustaka Utama.

Gaspersz, Vincent. 2008. The Executive Guide to Implementing Lean Six Sigma.

Jakarta: PT. Gramedia Pustaka Utama.

Goetsch, D. L. & Davis, S. 1994. Introduction to Total Quality: Quality, Productivity,

Competitiveness. Englewood Cliffs, NJ : Prentice Hall International Inc.

Gultom, Sinurmaida. 2013 Studi Pengendalian Mutu Dengan Menggunakan

Pendekatan Lean Six Sigma Pada PT XYZ. e-Jurnal Teknik Industri FT USU III

(2) : 23-30. Medan : Universitas Sumatra Utara.

Gygi, C., dkk. 2012. Six Sigma For Dummies, 2nd

Edition. United States of America:

Wiley Publishing, Inc.

Harahap, I. H. 2011. Pengendalian Kualitas Produk Pipa Dengan Pendekatan Metode

Lean Six Sigma Pada PT. Invilon Sagita. Skripsi Sarjana FT USU Medan: tidak

dipublikasikan.

Hines, Peter, and Taylor, David. 2000. Going Lean. Proceeding of Lean Enterprise

Research Centre Cardiff Business School, UK.

Lee, Quarterman dan Snyder, B. 2007. Value Stream and Process Mapping. Enna

Product Coorporation, Bellingham.

Montgomery, Douglas C. 2002. Introduction To Statistical Quality Control. 4th

Edition

John Wiley & Sons (Asia) Pte Ltd. Singapore.

Nawawi. 2003. Metode Penelitian Bidang Sosial. Yogyakarta. Gajahmada University

Press.

Pearn, W.L. and Chen, K.S. (1997) Making Decisions In Assessing Process Capability

Index Cpk. Quality And Reliability Engineering International.

Pujawan, I Nyoman. 2003. Ekonomi Teknik. Surabaya; Guna Widya

Rakesh R., Jos, B.C. dan Mathew G. 2013. FMEA Analysis for Reducing Breakdowns

of a Sub System in the Life Care Product Manufacturing Industry. International

Journal of Engineering Science and Innovative Technology II (2).

Robbin, S.P., & Coulter, M. 2005. Management. 8th

. New Jersey; Prentice Hall.

Setiawan, J. A. dan Supriyanto, H. 2012. Perbaikan Kualitas Pada Produksi Pupuk

Dengan Pendekatan Konsep Six Sigma (Studi Kasus: Pabrik Phonska Pt.

Petrokimia Gresik). ITS Surabaya. http://digilib.its.ac.id/public/ITS-paper-

21879-2507100057-Paper.pdf.

Shingo, Shigeo. 1990. A Study of the Toyota Production System. USA: Andrew P.

Dillon Productivity Press.

Suef. 2002. Pengendalian Kualitas. Surabaya; Insitut Teknologi Sepuluh November

Surabaya Press.

Sutalaksana, Iftikar, dkk. 1979. Teknik Tata Cara Kerja. Bandung; Departemen Teknik

Industri ITB.

Syahindri, Putri K. R. 2010. Pendekatan Lean Sigma Sebagai Upaya Untuk Minimasi

Waste Pada Proses Pengemasan Industri Farmas (Studi Kasus: PT Surya

Dermanto Medica Laboratories Surabaya). Tugas Akhir tidak dipublikasikan.

Malang: Universitas Brawijaya.

Teli, S. N., dkk. 2012. Assesment of Cost of Poor Quality in Automobile Industry.

International Journal of Engineering Research and Applications II (6) 330-336.

Tomasson, M., Wallin, J. 2013. Cost of Poor Quality; Definition and Development of a

Process-Based Framework. Department of Technology Management and

Economics Division of Quality Sciences; Chalmers University Of Technology

Press.

Widiatmoko, W., dkk. 2013. Studi Implementasi Lean Six Sigma Dengan Pendekatan

Value Stream Mapping Untuk Mereduksi Idle Time Material Pada Gudang

Pelat Dan Profil. Jurnal Teknik POMITS II (1). Surabaya: Insitut Teknologi

Sepuluh November.

Wignjosoebroto, Sritomo.1995. Ergonomi, Study Gerak dan waktu. Edisi pertama.

Gunawidya, Jakarta.

Wiratmoko, M. Y., dkk. 2013. Peningkatan Kualitas Pada Proses Produksi Dengan

Pendekatan Lean Manufacturing (Studi kasus: PT. Philips Lighting Surabaya).

Surabaya: Insitut Teknologi Sepuluh November Digital Repository.

Yang, Kai. 2005. Design For Six Sigma For Service. USA : The McGraw-Hill

Companies Inc.