Post on 03-Feb-2023
AFTERMARKET HVAC PRODUCT GUIDE
MCC Mobile Climate Control
Heavy Duty Vehicle Applications
mcc-hvac.com
© Mobile Climate Control 1
- Table of Contents -
I. Split System Air Conditioning ... .....................................................................................................2
II. Convectors .................................................................................................................................33
III. Heaters ......................................................................................................................................46
IV. Compact Air Conditioning ............................................................................................................70
V. Compact Condensers ................................................................................................................100
VI. Louvers ....................................................................................................................................112
© Mobile Climate Control 3
Evaporator EM-1
A high performance free blow evaporator capable of covering a broad range of applications, the EM-1’s low profile makes it
an attractive compliment to commercial or school bus interiors. Advanced engineering, incorporating transverse blower
technology, delivers a high volume of evenly dispersed conditioned air for total passenger comfort regardless of one’s location
in the vehicle. The service friendly design allows easy access for removal, cleaning, and/or replacement of the reusable air
filter.
Features Benefits
• Transverse blower technology • Provides uniform air flow across the slanted coil which increases evaporator performance and efficiency.
• Offers unparalleled 10,000 hours usage
• Flexible to fit any application
• Strength and durability
• Maximum capacity and efficiency
• Lowest noise levels and maximum air throw
• New extreme long life motors
• Available for front and rear ceiling mount
• Galvanized steel frame
• State of the art enhanced coil
• Attractive plastic cover available in two colors
© Mobile Climate Control 4
Technical Data
Cooling capacity60000 Btu/hr (15.1 kW) IMACA [1]
27000 Btu/hr (6.8 kW) ARI [2]
Max amperage requirement 27 A @ 13.5 V dc (High Speed) Voltage
Air flow 709 CFM (1205 m³/hr) [3]
Refrigerant R134a
Length 41.25 (1048 mm)
Width 19.13 (486 mm)
Height 7.73 (196 mm)
Weight 59 lbs (27 kg)
Condensate drain connection ½ (12.7 mm) O.D (doal drains)
Cover color Snow White or Dove Gray
[1] IMACA conditions: 100°F (38°C) / 90°F (32°C) / 50% RH [2] ARI conditions:: 95°F (35°C) / 80°F (27°C) / 50% RH[3] Airflow is tested at super high speed with cover and louvers fully installed, 0” static, 13.5 VDC
© Mobile Climate Control 5
Evaporator EM-2
Features Benefits
• Transverse blower technology • Provides uniform air flow across the slanted coil which increases evaporator performance and efficiency.
• Offers unparalleled 10,000 hours usage
• Flexible to fit any application
• Strength and durability
• Maximum capacity and efficiency
• Lowest noise levels and maximum air throw
• New extreme long life motors
• Available for front and rear ceiling mount
• Galvanized steel frame
• State of the art enhanced coil
• Attractive plastic cover available in two colors
A high performance free blow evaporator well suited for mid-sized commercial, or Type- A school bus applications. The
EM-2’s low profile makes it an attractive compliment to any vehicle’s interior. The advanced engineering of transverse blower
technology delivers a high volume of evenly dispersed conditioned air for total passenger comfort regardless of one’s location
in the vehicle. The service friendly design allows easy access for removal, cleaning, and/or replacement of the reusable air
filter.
© Mobile Climate Control 6
Technical Data
Cooling capacity45000 Btu/hr (11.4 kW) IMACA [1]
18500 Btu/hr (4.7 kW) ARI [2]
Max amperage requirement 27 A @ 13.5 V dc (High Speed) Voltage
Air flow 552 CFM (938 m³/hr) [3]
Refrigerant R134a
Length 32.66 (829 mm)
Width 19.13 (486 mm)
Height 7.68 (195 mm)
Weight 50 lbs (22 kg)
Condensate drain connection ½ (12.7 mm) O.D (doal drains)
Cover color Snow White or Dove Gray
[1] IMACA conditions: 100°F (38°C) / 90°F (32°C) / 50% RH [2] ARI conditions:: 95°F (35°C) / 80°F (27°C) / 50% RH[3] Airflow is at tested super high speed with cover and louvers fully installed, 0” static, 13.5 VDC
© Mobile Climate Control 7
Evaporator EM-3
Features Benefits
• Multi speed, high efficiency blowers
• Available for front or rear ceiling mount
• Heavy duty construction with galvanized steel frame and blower housing
• Maximum airflow on high speed
• Flexible to fit any application
• Strength and durability
A high performance free blow evaporator providing capacity requirements of longer length commercial bus applications,
and for use in extreme heat conditions. The EM-3 can be configured in single or dual refrigerant circuits, providing a
flexible solution to increased capacity from a single evaporator. The EM-3 is also available with an optional heat function.
© Mobile Climate Control 8
Technical Data
Cooling capacity 86000 Btu/hr (21.7 kW) IMACA [1]
Heating capacity (Optional Feature) 70000 Btu/hr (17.7 kW)
Air flow 1322 CFM (2247 m³/hr) [2]
Max amperage requirement 43.9 A @ 13.5 V dc (High Speed) Voltage
Refrigerant R134a
Length 59.38 (1508 mm)
Width 22.75 (578 mm)
Height 9.9 (251 mm)
Weight 98 lbs (44.5 kg)
Condensate drain connection 5/8” (12.7 mm) O.D (doal drains)
Cover color Dove Gray
[1] IMACA conditions: 100°F (38°C) / 90°F (32°C) / 50% RH [2] Airflow is tested at super high speed with cover and louvers fully installed, 0” static, 13.5 VDC
© Mobile Climate Control 9
Evaporator EM-7
Features Benefits
• Transverse blower technology • Provides uniform air flow across the slanted coil which increases evaporator performance and efficiency.
• Offers unparalleled 10,000 hours usage
• Flexible to fit any application
• Strength and durability
• Lowest noise levels and maximum air throw
• New extreme long life motors
• Available for front and rear ceiling mount
• Galvanized steel frame
• State of the art enhanced coil
• Attractive plastic cover available in two colors
A high performance free blow evaporator well suited for shorter wheelbase commercial; or paratransit vehicles. It can also
be used in applications requiring an increase in overall capacity. The EM-7’s low profile and small footprint allow for various
placement options while visually blending smoothly within any vehicle’s passenger compartment. The service friendly design
allows easy access for removal, cleaning, and/or replacement of the reusable air filter.
© Mobile Climate Control 10
Technical Data
Cooling capacity35000 Btu/hr (8.8 kW) IMACA [1]
13700 Btu/hr (3.5 kW) ARI [2]
Max amperage requirement 16 A @ 13.5 V dc (High Speed) Voltage
Air flow 376 CFM (640 m³/hr) [3]
Refrigerant R134a
Length 25.39 (645 mm)
Width 19.13 (486 mm)
Height 7.68 (195 mm)
Weight 39 lbs (17 kg)
Condensate drain connection ½ (12.7 mm) O.D (doal drains)
Cover color Snow White or Dove Gray
[1] IMACA conditions: 100°F (38°C) / 90°F (32°C) / 50% RH [2] ARI conditions:: 95°F (35°C) / 80°F (27°C) / 50% RH[3] Airflow is tested at super high speed with cover and louvers fully installed, 0” static, 13.5 VDC
© Mobile Climate Control 11
Evaporator EM-9
The EM-9 ceiling mount air conditioning evaporator has also been engineered for maximum serviceability and ease of
installation in commercial and school buses. Because the drain pan is part of the basic system, the EM-9 can be completely
installed, charged and tested before the cover is put in place, greatly reducing installation time. Simple cover removal
provides ready access to all serviceable components. This evaporator is available for ducted applications only up to 35”
(889 mm) passenger areas.
Features
• Heavy duty steel frame is reinforced for added strength
• High volume air flow that delivers performance in to any shape of duct work
• State of the art enhanced coils for maximum cooling capacity and increased efficiency
• Flexible mounted positions offer airflow where you need it
• Three speed blower allows for full air flow adjustment to optimize system to individual cooling preferences
• Unit incorporates coil freeze up protection. The result is increased trouble free compressor life
• Return air filter can be removed and cleaned without removing the unit cover
© Mobile Climate Control 12
Cooling capacity
Air flow
Refrigerant
Length
Width
Height
Weight
Condensate drain connection
Max amperage requirement
Voltage
Cover color
Technical Data
60000 Btu/hr (17.5 kW) IMACA[1] 27000 Btu/hr (8 kW) ARI[2]
1600 CFM (2718 m3/hr)
R134a
41.75” (1060 mm)
13.125” (333 mm)
9” (228 mm)
85 lbs (38.5 kg)
½” (12.7 mm) O.D
37.5 A @ 13.5 V dc (High Speed)
12 or 24 VDC
Snow White or Dove Gray [1] IMACA conditions: 100°F (38°C) / 90°F (32°C) / 50% RH [2] ARI conditions: 95°F (35°C) / 80°F (27°C) / 50% RH
© Mobile Climate Control 13
Evaporator EM-17
The EM-17 rear ceiling mount air conditioning evaporator has been specifically engineered for use in vehicles with an overall
length of 35 – 40’ (1067 – 1219 cm) and which are used in the severest of climates and operating conditions. This unit was
designed with the term “heavy duty” in mind; from its long life, large frame, transit style motors, to its own power supply
generated by a 24V batteryless alternator, this is the unit that needs to be experienced to be appreciated. It has conquered
transit duty school bus applications in the desert, now let it conquer your unique application.
Features
• Internally enhanced rugged coil design delivers the highest capacity in its class while using R-134a as its refrigerant
• Heavy duty steel frame construction coupled with stain-less steel fasteners equal rugged construction
• The highest air volume in its class is generated by two re buildable 56-series cast frame constructed motors which drive two large diameter metal scroll blower wheels. This is then evenly dispersed through the use of ductwork to provide total passenger comfort
• State of the art electronic controls are incorporated to provide minimum wiring, improved reliability, and maxi-mum protection
• All refrigerant connection points are 0-ring for added leak protection and are coupled with hoses constructed to meet or exceed SAE Spec J2064 Type E
• A vinyl-clad steel cover is included in your choice of two colors (snow white or dove gray) which are custom fit to your vehicles unique contours
• A durable aluminum mesh filter is mounted in an easy to service hinged air return grill for minimized service time and maximum operating time
© Mobile Climate Control 14
Cooling capacity
Air flow
Refrigerant
Length
Width
Height
Weight
Condensate drain connection
Current draw
Cooling coil
Motors
Blowers
Blower housings
Expansion valve
Return air filter
Technical Data
130000 Btu/hr (38 kW) IMACA[1] 32760 Btu/hr (9.61 kW) ARI[2]
2400 CFM (4080 m3/hr)
R134a
16” (406.4 mm)
48.75” (1238.3 mm)
15.5” (394 mm)
196 lbs (89 kg)
½” (12.7 mm) O.D
57 amps at 27 VDC (Rated @ high speed and ½” static)
6 rows deep, galvanized steel tube sheets with internally enhanced 0.4” (9.5 mm) diameter copper tubes expanded into 0.006” (0.15 mm) aluminum fins
Fully rebuildable 56 series frame construction capable of a constant duty design life rating of no less than 10000 hours. Motor shafts are a series 300 stainless steel for corrosion resistance. Motors are two speed (hi/low) through use of an external voltage dropping resistor.
Rated at 2060 CFM (3500 m3/hr) @ 0.5” (13 mm) static @ 27 volts and dynamical balanced for quiet operation.
Steel construction coated with a heat-resistant sound dampening foam to aid in noise reduction
Externally equalized right angle valve with a replaceable power head and cage assembly.
The superheat is factory preset
Constructed of a durable aluminum mesh rated to pass FMVSS302
[1] IMACA conditions: 100°F (38°C) / 90°F (32°C) / 50% RH [2] ARI conditions: 95°F (35°C) / 80°F (27°C) / 50% RH
© Mobile Climate Control 15
Evaporator IW-1
A high performance free blow evaporator capable of covering a broad range of applications. The “in-wall” unit is designed to
fit within the vehicle bulkhead/cap, providing a “built-in” appearance without being located over a passenger. The sleek
molded cover provides directional airflow for maximum passenger comfort while incorporating a service friendly design that
allows easy access for removal, cleaning, and/or replacement of the reusable air filter.
Features
• Lightweight aluminum frame construction
• Flexible mounting configurations for every make of body
• Integrated motor cover panel for ease of service
• State of the art enhanced coils for maximum cooling capacity
• Flush mount installation provides maximum head clearance and clean OEM appearance
• Easy access hinged return air filter provides for reduced service time
© Mobile Climate Control 16
Cooling capacity
Air flow
Refrigerant
Length
Width
Height
Weight
Condensate drain connection
Max amperage requirement
Voltage
Cover color
Technical Data
55000 Btu/hr (16.11 kW) IMACA[1] 27005 Btu/hr (8 kW) ARI[2]
1600 CFM (2718.42 m3/hr)
R134a
43.12” (1095.2 mm)
7.46” (189.5 mm)
13.77” (349.8 mm)
50 lbs (22.7 kg)
½” (12.7 mm) OD
23.7 A @ 13.5 V dc (High Speed)
12 or 24 VDC
Snow White or Dove Gray
[1] IMACA conditions: 100°F (38°C) / 90°F (32°C) / 50% RH [2] ARI conditions: 95°F (35°C) / 80°F (27°C) / 50% RH
© Mobile Climate Control 17
Evaporator IW-2
A high performance free blow evaporator capable of covering a broad range of applications. The “in-wall” unit is designed to
fit within the vehicle bulkhead/cap, providing a “built-in” appearance without being located over a passenger. The sleek
molded cover provides directional airflow for maximum passenger comfort while incorporating a service friendly design that
allows easy access for removal, cleaning, and/or replacement of the reusable air filter.
Features
• Lightweight aluminum frame construction
• Flexible mounting configurations for every make or body
• Integrated motor cover panel for ease of service
• State of the art enhanced coils for maximum cooling capacity
• Flush mount installation provides maximum head clearance and clean OEM appearance
• Easy access return air filter provides for reduced service time
© Mobile Climate Control 18
Cooling capacity
Air flow
Refrigerant
Length
Width
Height
Weight
Condensate drain connection
Max amperage requirement
Voltage
Cover color
Technical Data
45000 Btu/hr (13.2 kW) IMACA[1] 18500 Btu/hr (5.42 kW) ARI[2]
800 CFM (1359.2 m3/hr)
R134a
33.8” (858.5 mm)
8.30” (211 mm)
12.56” (319 mm)
45 lbs (20.41 kg)
½” (12.7 mm) OD
23.7 A @ 13.5 V dc (High Speed)
12 or 24 VDC
Snow White or Dove Gray
[1] IMACA conditions: 100°F (38°C) / 90°F (32°C) / 50% RH [2] ARI conditions: 95°F (35°C) / 80°F (27°C) / 50% RH
© Mobile Climate Control 19
Evaporator IW-4
The IW-4 unit frees up the front bulkhead of Thomas Built Buses C2 conventional buses. The IW-4 evaporator can also be
matched with other MCC components to provide a complete air conditioning system that meets your exact vehicle size,
operating mode and climate.
Features
• Lightweight aluminum frame construction
• Integrated motor cover panel for ease of service
• Enhanced coils for maximum cooling capacity
• Easy access return air filter helps to reduce service time
• Drop in one piece construction simplifies installation time and provides maximum head clearance with a clean OEM appearance
© Mobile Climate Control 20
Cooling capacity
Air flow
Refrigerant
Length
Width
Height
Weight
Condensate drain connection
Max amperage requirement
Voltage
Cover color
Technical Data
55000 Btu/hr (16.1 kW) IMACA[1] 28450 Btu/hr (8.33 kW) ARI[2]
1500 CFM (2548.5 m3/hr)
R134a
38.10” (967.7 mm)
13.64” (346.5 mm)
10.30” (261.6 mm)
40 lbs (18.1 kg)
½” (12.7 mm) OD
23.7 A @ 13.5 V dc (High Speed)
12 or 24 VDC
Snow White or Dove Gray[1] IMACA conditions: 100°F (38°C) / 90°F (32°C) / 50% RH [2] ARI conditions: 95°F (35°C) / 80°F (27°C) / 50% RH
© Mobile Climate Control 21
Evaporator IW-10
A high capacity, high performance, free blow evaporator within the smallest amount of space. At close to three inches shorter
than most bulkhead applicable evaporators, the IW-10 is the ideal choice when working within limited space such as over
windows/windshields, and entry/exit doors. The sleek molded cover provides directional airflow for maximum passenger
comfort and incorporates a maintenance friendly return air filter.
Features
• Lightweight aluminum construction
• Flexible mounting configurations
• Enhanced coils for maximum cooling capacity
• Easy access return air filter helps to reduce service time
• Flat or formed ABS cover
• Covers available in white or gray
• Flush mount installation provides maximum head clearance and a clean OEM appearance
© Mobile Climate Control 22
Cooling capacity
Air flow
Refrigerant
Length
Width
Height
Weight
Condensate drain connection
Max amperage requirement
Voltage
Cover color
Technical Data
55000 Btu/hr (16.1 kW) IMACA[1] 20580 Btu/hr (6.87 kW) ARI[2]
1300 CFM (2208.7 m3)
R134a
43.30” (1100 mm)
7.00” (177.8 mm)
10.19” (25.9 mm)
32 lbs (14.5 kg)
½” (12.7 mm) OD
23.7 A @ 13.5 V dc (High Speed)
12 or 24 VDC
Snow White or Dove Gray
[1] IMACA conditions: 100°F (38°C) / 90°F (32°C) / 50% RH [2] ARI conditions: 95°F (35°C) / 80°F (27°C) / 50% RH
© Mobile Climate Control 23
A highly efficient, skirt mounted condenser that provides industry leading performance and durability. The heat-fused,
powder coated, steel constructed chassis is built to withstand harsh, rugged, outdoor conditions. The large volume fans
channel air through the coil, while angularly exhausting the hot air downward, preventing the use of hot air in the
recirculation process. The MCC exclusive design allows the sealed unitized fan to be easily serviced, without any cover/panel
removal. The pioneering micro-channel heat exchanger allows for greater heat transfer efficiency, resulting in enhanced
cooling, reducing compressor stress, and promotes overall system longevity.
Condenser CM-2
Features
• Slim Line CM-2 cabinet is constructed using rugged,
powder coated, steel construction
• Zinc coated for added durability and corrosion protection.
• Integrated high pressure safety switch as standard equipment
• Unitized motor/fan package increases service access and decreases service time
• Winter protection package
• Skirt mount or component mount air inlet grill
• 12V or 24V operation
• Stackable kit available
• Plug-n-Play connectors on unit and fan motor provide for ease of installation and motor service
• Incorporated single piece receiver/dryer and system moisture indicator reduced possible leak joints
© Mobile Climate Control 24
Capacity
Air flow
Condenser coil
Condenser fans
Fan motors
Max amperage requirement
Safety controls
Receiver filter dryer
Weight
Available color
Technical Data
60000 Btu/hr (17.58 kW) IMACA[1]
900 CFM (1529 m3/hr)
Advanced technology Micro Channel Heat Exchanger (MCHX)
Unitized, low-profile, axial-flow type propeller fans balanced for quiet, vibration-free
operation with finger guard
Totally enclosed, pancake-style, permanent-magnet type with extended-life, permanently
lubricated bearings
14 amps @ 13.5 VDC; 7 amps @ 27.0 VDC
High refrigerant pressure cut-out 400 psi (28 bar); cut-in 300 psi (21 bar)
16 in3 (262 cm3), ½” [#8] Male Insert O-Ring (MIOR)
45 lbs (20.5 kg)
Midnight black[1] IMACA conditions: 100°F (38°C) / 90°F (32°C) / 50% RH
© Mobile Climate Control 25
A highly efficient, skirt mounted condenser that provides industry leading performance and durability. The heat-fused,
powder coated, steel constructed chassis is built to withstand harsh, rugged, outdoor conditions. The large volume fans
channel air through the coil, while angularly exhausting the hot air downward, preventing the use of hot air in the
recirculation process. The MCC exclusive design allows the sealed unitized fan to be easily serviced, without any cover/panel
removal. The pioneering micro-channel heat exchanger allows for greater heat transfer efficiency, resulting in enhanced
cooling, reducing compressor stress, and promotes overall system longevity.
Condenser CM-3
Features
• Micro channel all aluminum coil design for unmatched-heat transfer
• Zink coated for added durability and corrosion protection
• Rugged coated steel construction
• Integrated high pressure safety switch as standard equipment
• Unitized motor/fan package increases service access and decreases service time
• Winter protection package
• Skirt mount or component mount air inlet grill
• 12V or 24V operation
• Stackable kit available
• Incorporated single piece receiver/dryer and system moisture indicator reduced possible leak joints
• Plug-n-Play connectors on unit and fan motor provide for ease of installation and motor service
© Mobile Climate Control 26
Slim Line Series Condenser CM-3
Capacity
Air flow
Condenser coil
Condenser fans
Fan motors
Max amperage requirement
Safety controls
Receiver filter dryer
Weight
Available color
Technical Data
80000 Btu/hr (23.44 kW) IMACA[1]
1350 CFM (2294 m3/hr)
Advanced technology micro channel heat exchanger (MCHX)
Unitized, low profile, axial flow vector fans balanced for quiet, vibration free operation with finger guard
Totally enclosed, pancake style, permanent-magnet type with extended life, permanently lubricated
bearings
21 amps @ 13.5 VDC; 11.5 amps @ 27.0 VDC
High refrigerant pressure cut-out 400 psi (28 bar); cut-in 300 psi (21 bar)
16 in3 (262 cm3), ½” [#8] Male Insert O-Ring (MIOR)
51 lbs (23.2 kg)
Midnight black[1] IMACA conditions: 100°F (38°C) / 90°F (32°C) / 50% RH
© Mobile Climate Control 27
A highly efficient, skirt mounted condenser that provides industry leading performance and durability. The heat-fused,
powder coated, steel constructed chassis is built to withstand harsh, rugged, outdoor conditions. The large volume fans
channel air through the coil, while angularly exhausting the hot air downward, preventing the use of hot air in the
recirculation process. The MCC exclusive design allows the sealed unitized fan to be easily serviced, without any cover/panel
removal. The pioneering micro-channel heat exchanger allows for greater heat transfer efficiency, resulting in enhanced
cooling, reducing compressor stress, and promotes overall system longevity.
Condenser CM-14
Features
• Enhanced Copper Tube and Aluminium fin coil design for unmatched heat transfer coil
• Zinc coated for added durability and corrosion protection
• Rugged coated steel construction
• Integral high pressure switch eliminates high-side com-pressor cycling
• Unitized motor/fan package increases service access and decreases service time
• Winter protection package
• Incorporated single piece combination filter drier and sight glass with system moisture indicator reduces possible leak joints
• Skirt mount or component mount air inlet grill
• 12 V or 24 V operation
• Stackable kit available
• Plug-n-play connectors on unit and fan motor provide for ease of installation and motor service
© Mobile Climate Control 28
Condenser CM-14
Capacity
Air flow
Condenser coil
Condenser fans
Fan motors
Max amperage requirement
Safety controls
Receiver filter dryer
Weight
Available color
Technical Data
107000 Btu/hr (31.35 kW) IMACA[1]
3200 CFM (5437 m3/hr)
Four rows deep, patented, internally enhanced copper tubes expanded into aluminum fins
Unitized, low-profile, axial-flow vector fans balanced for quiet, vibration-free operation with finger guard
Totally enclosed, pancake style, permanent magnet type with extended life permanently lubricated bearings
29 amps @ 13.5 VDC; 26 amps @ 27.0 VDC
High refrigerant pressure cut-out 400 psi (28 bar); cut-in 300 psi (21 bar)
16 in3 (262 cm3)
95 lbs (43.1 kg)
Midnight Black
[1] IMACA conditions: 100°F (38°C) / 90°F (32°C) / 50% RH
© Mobile Climate Control 29
Roof Mount Condenser CR-410
Our CR-410 high capacity roof mount condenser has been engineered for use in commercial, light transit and school bus
applications. This unit is the perfect combination of sleek, low profile European styling and American innovation. It has
rugged thermoplastic polyolefin (TPO) cover shrouds and lightweight aluminum structure, while allowing complete service
access without cover removal. The highly adjustable mounting rails are designed to attach this unit to any exterior roof radius
without leaving visible gaps between the roof and unit cover.
MCC’s innovative introduction of the roof mount condenser series to the North American bus market has given body builders
the opportunity to free up skirt mounting space for a variety of options including compressed natural gas (CNG) tanks,
wheelchair lifts and luggage compartments, while maintaining an aerodynamic exterior appearance to the vehicle. Our
CR-410 roof mount condenser is the solution to road salt damage.
Features Benefits
• Designed for use with R134a Refrigerant • Lower cost, less weight, environmentally friendly
• Utilizes micro channel aluminum coil • Improved performance/ efficiency, reduced weight, reduced refrigerant charge, increased compressor life
• Thermoplastic Polyolefin (TPO) plastic cover • Durable, lightweight, flexible, UV resistant housing
• Multiple unit configurations available• Allows unit to be used in various mounting applications and on various body types/ roof contours
• Heavy gauge aluminum frame • Corrosion resistant, lightweight base
• Exterior visible sight glass and moisture indicator without cover removal • Ability to view for service/ maintenance purposes while saving time
• O-Ring refrigerant connections • Reduced risk of refrigerant leaks
• Multiple available options and upgrades • Brushless fan motors, branch and winter guard kits just to name a few
© Mobile Climate Control 30
Technical Data
Capacity 82000 Btu/hr (24 kW) IMACA[1] 57000 Btu/hr (16.7 kW) ARI[2]
Air flow 1680 CFM (2854 m3/hr)
Condenser coil Advanced technology micro channel heat exchanger (MCHX)
Condenser fans Low-profile, axial flow type propeller fans balanced for quiet, vibration free operation with finger guard.
Fan motorsTotally enclosed low profile permanent-magnet 4-pole brushed motors with extended life lubricated sealed bearings.
Max amperage requirement 21 amps @ 13.5 VDC; 11 amps @ 24 VDC
Safety controls High refrigerant pressure cut out 400 psi (28 bar), cut in 300 psi (21 bar)
Filter dryer 16 in3 (262 cm3)
Weight 58 lbs (26.3 kg)
Available color White
[1] IMACA conditions: 100°F (38°C) / 90°F (32°C) / 50% RH [2] ARI conditions: 95°F (35°C) / 80°F (27°C) / 50% RH
CR-410 CHASSIS SHOWN(COVER REMOVED FOR CLARITY)
SIGHT GLASS 26.02[660.9]
6.99[177.6]
44.88[1139.8]
48.12[1222.2]
RIVNUT, 1/4-209 PLCS(COVER SECUREMENT)
CM1 CM2 CM3
5/16-18 THREADED INSERT4 PLCS, EACH SIDE(MOUNTING RAIL SECUREMENT)
5/16-18 THREADED INSERT3 PLCS, EACH END(MOUNTING RAIL SECUREMENT)
MIO #10GAS IN
MIO #8LIQUID OUT
PRESSURE SWITCH CONNECTION2 CAVITY SHROUD CONNECTOR
PACKARD ELECTRIC 12010973MCC P/N 22-01585-00
MALE TERMINALS
2 C AVITY MALE CONNECTORMOLEX 19433-0014
MCC PART NO. 22-50099-278 GA WIRES
POS 1 BLK (+) POS 2 GRN (-)
© Mobile Climate Control 31
Roof Mount Condenser CR-430
The CR-430 roof mounted condenser module has been designed to meet the demanding and varied needs of the global HVAC market. The CR-430, with its attractive, lightweight, and low profile design, provides improved condensing performance, reliability, and ease of installation, as compared to its predecessors. The all steel powder coated cabinet construction provides unparalleled strength and reliability, while the attractive TPO, cover with integrated stainless steel grills, helps keep the weight down without sacrificing functionality or reliability. The system utilizes MCC’s signature micro-channel heat exchanger (MCHX) coil technology that delivers maximum capacity through improved heat transfer performance.
Roof mount Air-conditioning condenser module
Features Benefits• Designed for use with R134a Refrigerant • Lower cost, less system weight, environmentally friendly
• Utilizes Micro Channel Condenser Coil (MCHX) • Improved performance/efficiency, reduced weight, reduced refrigerant charge
• Powder coated galvanized steel frame • Increased strength and durability
• TPO plastic cover • Durable, lightweight, flexible, UV resistant
• Large capacity receiver tank(s) w/sight glass •
• Large capacity filter drier(s) (30 cu.in.) • Improved system reliability, cleaner dryer refrigerant and refrigerant oil
• Single loop version includes single liquid line service valve • Allows for low side pump down for ease of service
• Service-ability/Install friendly • Unit was design with install- ability and service ability in mind
• Multiple unit configurations available • Allow unit to be used in various applications and climates
• Available options and upgrades • Brushless fans, branch guards, etc
Increases charge holding capacity for system variation, ease of charge with easy to view sight glass
© Mobile Climate Control 32
Technical Data
Condensing capacity 137,000 Btu/hr (37kW) Modeled Max Capacity Condition[1]
Air flow 3-Fan: 3500 CFM (5950 m3/h)
2-Fan: 2400 CFM (4100 m3/h)
Refrigerant R134a
Current 3-Fan: 47 A at 13.5 Vdc / 31 A at 27.5 Vdc
2-Fan: 31 A at 13.5 Vdc / 21 A at 27.5 Vdc
Weight 160lbs (72.5 kg)
Dimensions (LWH) 64.7” x 10” x 48.4”[1] Max Capacity: Air in 100°F/50%RH, refrigerant 140°F DST/170°F, refrig exit. 0°F Sub-Cool
© Mobile Climate Control 34
Convector UC-1
All the heat you need in one light and compact convector Combining modern design and high capacity, the UC-1 single pipe convector is the lightest in MCC’s product range and small enough to fit in tight spaces. The UC-1 Convector is built around a single pipe made of aluminum or copper. This means the convector is very compact and requires a small mounting footprint.
Features
• Suitable for heating in buses and coaches
• Designed for vehicles with water glycol based heating systems
• Quiet and draft free heating
• Maintenance free
• Single pipe for compact design
• Shaped to fit reinforced wall structures
© Mobile Climate Control 35
Heat output
Piping
Weight
Maximum length
Color
Technical Data
1604 Btu/hr (0.47 kW) Q60[1] 2661 Btu/hr (0.78 kW) Q100
[1]
Copper or aluminium Ø 1.1” (28 mm) for hose connection
Copper 14 lbs/ft (1.93 kg/m) , aluminium 12 lbs/ft (1.71 kg/m)
197” (5 m)
Silver anodized aluminium
Please contact your MCC representative for more details
[1] The Qx value stands for the power in kW emitted from a unit length (1 m) of the convector at a temperature difference between coolant inlet and room air equal to the subscript (x) .
40
71
28
83
123
60
5
L
CL 7878
50 50
Face is shaped for reinforced wall structure
Dimensions in mm
Convector UC-1
© Mobile Climate Control 36
Convector P-90
Highly efficient and comfortable bus heatingThe Convector P-90 is based on a twin copper pipe system that supplies efficient heat in a space saving design. Can be used as a stand alone unit or part of a complete heating system. Transition pieces are available to accommodate bulk heads, wheel wells and doors.
Features
• Suitable for heating buses, coaches and other vehicles
• Designed for vehicles with water/glycol heating systems
• Quiet and draft free heating
• Maintenance free
• Robust design
• Twin pipe design for optimized heat output
© Mobile Climate Control 37
Heat output
Piping
Weight
Maximum length
Color
Technical Data
1880 Btu/hr (0.55 kW) Q60[1] 3347 Btu/hr (0.98 kW) Q100
[1]
Copper Ø 0.8” (22 mm)
25 lbs/ft (3.14 kg/m)
197” (5 m)
Silver anodized aluminium
Please contact your MCC representative for more details
[1] The Qx value stands for the power in kW emitted from a unit length (1 m) of the convector at a temperature difference between coolant inlet and room air equal to the subscript (x) .
Dimensions in mm
L
40 40CL
5,4
80,4
179
66
35,3
158
22
Convector P-90
© Mobile Climate Control 38
Convector P-20
Compact design for small spaces
The Convector P-20 is designed for use in small spaces such as boats, caravans, bus sleeping cabins and driver
compartments. The P-20 distributes heat uniformly, creating a comfortable environment with gentle air flow.
The advantage with the P-20 convector, is of course, its small footprint which make maintenance and installation simple.
Features
• Suitable for heating in buses, minivans, caravans, mobile homes and marine applications
• Designed for vehicles with water/glycol heating systems
• Quiet and draft free heating
• Maintenance free
• Very compact design
• Twin pipe design for optimized heat output
© Mobile Climate Control 39
Convector P-20
Technical Data
Output Heat output 384 W/m Q60[1] (640 W/m Q100
{1})
Piping Copper or aluminum Ø 15 mm
Weight Copper 1.54 kg/m, aluminium 1.31 kg/m
Flow rate 0.30 l/m
Depth 32 mm
Height 141 mm
Lengths 250, 500, 750, 1000 mm
Fins Anodized aluminium
[1] The Qx value stands for the power in kW emitted from a unit length (1m) of the convector at a temperature difference between coolant inlet and room air equal to the subscript (x).
© Mobile Climate Control 40
Convector UC-9
High heat output at a low weightThe new UC-9 provides efficient heating in a compact design. This convector has been specially designed to deliver maximum heat output. It is designed to fit in buses with reinforced wall structure and comes with the necessary hardware to make in-stallation easy.
Features
• Designed to heat buses, coaches and marine applications
• Suitable for vehicles with water/glycol based heating systems
• High output
• Light and compact
• Quiet and draft free heating
• Maintenance free
• Twin pipe for optimized heat output
• Shaped to fit reinforced wall structure
© Mobile Climate Control 41
Heat output
Piping
Weight
Maximum length
Color
Technical Data
2091 Btu/hr (0.61 kW) Q60 3467 Btu/hr (1 kW) Q100[1]
Copper Ø 0.7” (18 mm) + aluminium with hose connections
Copper 2.6 kg/m, aluminium 2.34 kg/m
197” (5 m)
Silver anodized aluminium
Please contact your MCC representative for more details
[1] The Qx value stands for the power in kW emitted from a unit length (1 m) of the convector at a temperature difference between coolant inlet and room air equal to the subscript (x) .
Dimensions in mm
52,734,3
88
45
108,
4
53,6
174
2x 18
L 5
Convector UC-9
© Mobile Climate Control 42
Convector P-200
Efficient bus heatingThe P-200 offers efficient heating and can be integrated with the Whisper 200 family. The P-200 is a twin pipe design made of copper or aluminum that carries glycol based coolant through the convector. This coil can provide up to as much as 714W/m of heat.
Features
• Suitable for heating buses, coaches where highly efficient heating is required
• Designed for vehicles with water/glycol based heating systems
• High output
• Quiet and draft free heating
• Maintenance free
• Fully compatible with Whisper 200 heaters
© Mobile Climate Control 43
Heat output
Piping
Weight
Maximum lengths
Color
Technical Data
2436 Btu/hr (0.71 kW) Q60* 4060 Btu/hr (1.2 kW) Q100*
Copper or aluminum Ø 0.8” (22 mm)
Copper 27 lbs/ft (3.71 kg/m) , aluminium 24 lbs/ft (3.34 kg/m)
197” (5 m)
Silver anodized aluminium
Please contact your MCC representative for more details
* The Qx value stands for the power in kW emitted from a unit length (1 m) of the convector at a temperature difference between coolant inlet and room air equal to the subscript (x) .
Dimensions in mm
4340
L 101.8
162,6
186.8
4340
6660
,4
48,6
Ø22
Ø5,4
Convector P-200
© Mobile Climate Control 44
Power Convector PC-500
Even temperature distribution, small footprint, numerous layout options and easy to installPC-500 (power convector) is a patented “crossover” product featuring the benefits of a normal convector and that of a fan assisted heating unit. The PC-500 has three operating modes:
Normal convector mode, (free-flow) warm air rises naturally (convection) from the unit.
Fan half-speed mode, (forced-air) draws the air from the top of the unit through the fins and out to the floor. Once on the floor the warm air mixes and rises to the top.
Fan full-speed mode, (forced-air) gives instant heating results by taking maximum heat from the PC 500 and distributing this air all over the floor.
Features• Ideal for buses, coaches and other vehicles
• Designed to work in any climate region
• Can be ordered with one fan (10”/250 mm unit) up to 15 fans (236”/6 m unit)
• Available both 12V and 24V versions
• Covers can be easily removed for maintenance
• Max number of PC-500 in series 3 units connection
• Multiple fans can be mounted according to customer’s heating specifications
© Mobile Climate Control 45
Heat output
Piping[2]
Weight Copper
Weight Aluminium
Maximum length
Color
Technical Data
10236 Btu/hr (3kW) Q60 [1]
16378 Btu/hr (4.8 kW) Q100 [1]
θ 0.59” (15 mm)
9.5 lbs (4.3 kg)
8.5 lbs (3.9 kg)
197” (5 m)
Silver anodized aluminium
Please contact your MCC representative for more details
1587 Btu/hr (0.46 kW) Q60[1]
2423 Btu/hr (0.71 kW) Q100 [1]
θ 0.59” (15 mm)
8 lbs (3.7 kg)
7 lbs (3.3 kg)
197” (5 m)
Silver anodized aluminium
Fan Mode – One meter section, 5 fans Radiant Mode – One meter section
[1] The Qx value stands for the power in kW emitted from a unit length (1m) of the convector at a temperature difference between coolant inlet and room air equal to the subscript (x).[2] Custom piping may be available
Note: Dimensions in mm only.
Power Convector PC-500
© Mobile Climate Control 47
Compact under seat heater T12-12807
Compact under seat heater with all aluminum heater core designed for low pressure and low coolant flow, suited for all climates and vehicles. Can also be filled as a stand alone unit for multiple placements. This low cost multi-functional heater will suit all budgets.
Robust, Light weight and Cost Competitive Heater
Features Benefits
• Simple compact design
• Copper/Aluminum heater core
• Single or multi pack use
• Available in 12 and 24 vdc
• Connection in minutes
• Brush or brushless motors
• Light weight
• Adapts to any application
• Many configurations possible due to flexible design
• Simple installation
• Low cost
© Mobile Climate Control 48
Technical Data
Heating capacity @ max 60000 Btu/hr (17.6 kW) 70000 Btu/hr option with higher output motor
Length 27.4” (697.8mm)
Width 11” (281mm)
Height 9.2” (234.5mm)
Weight 15 lbs (6.8 kg)
Fans 2 fan
Current Draw (Max) 16.5 amps at 13.5 VDC
Hose Connection: 1” OD Conditions: Ambient temperature 0ºF, Glycol temperature 150ºF, Glycol-water 50-50, Coolant flow rate 8 GPM
© Mobile Climate Control 49
Compact under seat Heater T12-12809
Compact under seat heater with all aluminum heater core designed for low pressure and low coolant flow, suited for all climates and vehicles. Can be filled as a stand alone unit for multiple placements. This low cost multi-functional heater will suit all budgets.
Robust, Light weight and Cost Competitive Heater
Features Benefits
• Simple compact design
• Copper/Aluminum heater core
• Single or multi pack use
• Available in 12 and 24 vdc
• Connection in minutes
• Brush or brushless motors
• Light weight
• Adapts to any application
• Many configurations possible due to flexible design
• Simple installation
• Low cost
© Mobile Climate Control 50
Technical Data
Heating capacity @ max 35000 Btu/hr (10.3 kW) 45000 Btu/hr option with higher output motor
Length 16.8” (428.8mm)
Width 11” (281mm)
Height 9.1” (233mm)
Weight 15 lbs (6.8 kg)
Fans 1 fan
Current Draw (Max) 8 amps at 13.5 VDC
Hose Connection: 1” OD[1] Conditions: Ambient temperature 0ºF, Glycol temperature 150ºF, Glycol-water 50-50, Coolant flow rate 8 GPM
© Mobile Climate Control 51
Compact under seat heater T12-12811
Compact under seat heater with all aluminum heater core designed for low pressure and low coolant flow, suited for all climates and vehicles. Can be filled as a stand alone unit for multiple placements. This low cost multi-functional heater will suit all budgets.
Robust, Light weight and Cost Competitive Heater
Features Benefits
• Simple compact design
• All aluminum heater core
• Single or multi pack use
• Available in 12 and 24 vdc
• Connection in minutes
• Brush or brushless motors
• Light weight
• Adapts to any application
• Many configurations possible due to flexible design
• Simple installation
• Low cost
© Mobile Climate Control 52
Technical Data
Heating capacity @ max 25000 Btu/hr (7.3 kW) 30000 BTU/hr option with higher output motor
Length 9.8” (249mm)
Width 12.4” (315.7mm)
Height 9.2” (235mm)
Weight 15 lbs (6.8 kg)
Fans 1 fan
Current Draw (Max) 6.7 amps at 13.5 VDC
Hose Connection: 5/8” ODConditions: Ambient temperature 0ºF, Glycol temperature 150ºF, Glycol-water 50-50, Coolant flow rate 8 GPM
© Mobile Climate Control 53
Fan Heater Model 201
Features
The compact design of the 201 is ideal for dash or under seat mounting. Air is delivered to sides of unit and can be controlled by air doors.
Part Descriptions: Specifications
Part No. No. Part No. Description No. Part No. Description
Specifications
12-010312-0102
1234567
89
10111213
24-013524-013624-013724-013323-000924-013824-0113
24-017225-010525-010725-002328-001422-004225-0095
Heating -13500 Btu/hr (3960 W) Air Flow -185 CFM (315 m3/h) Current -5.8 Amps/12V -2.9 Amps/24VWeight -7.5 lbs. (3.4 kg) 3-Speed operated motor.
Heater 12VHeater 24V
CasingCoverCoverMounting BracketDoor (3 Pcs.) VenturiMotor Bracket
Coil ProtectorMotor 12VMotor 24VFanGrommetHeater CoilResistor
© Mobile Climate Control 54
Blower Heater Model 202
Features
The 202 offers flexible installation options to fit a wide range of applications. Can be ducted for defrost capabilities.
Part Descriptions: Specifications
Part No. No. Part No. Description No. Part No. Description
Specifications
12-020312-021312-020412-021412-0293
1234
5
6
7
7A
7B7C
7D7E8910
111213
14
24-000924-000824-001222-0014
22-0021
22-0024
15-050315-050425-007025-007525-001725-0021
25-002225-002028-001028-001328-0005
24-006024-004524-006624-006723-011023-0125
Heating - 24700 Btu/hr (7240 W) Air Flow - 295 CFM (500 m3/h) Current - 12 Amps/12V - 6 Amps/24VWeight - 9 lbs. (4 kg) 3-Speed motor.
Heater 12V - Rear Conn.Heater 12V - Side Conn.Heater 24V - Rear Conn.Heater 24V - Side Conn.Heater 12V - Bottom Conn.
CasingCoverMounting BracketHeater Coil(Side Conn.) Heater Coil (Bottom Conn.) Heater Coil(Rear Conn.) Blower Assy. 12VBlower Assy. 24VMotor 12VMotor 24VBlower HousingBlower Wheel
ClipMotor TapeSnap-in PlugSnap-in PlugGrommet(Rear Conn.) GrillGrillFront (4 x 2” HA) Front (4 x 2 1/2” HA) Hose Adapter 2”Hose Adapter 2 1/2”
Items 11-14 are optional and have to be ordered separately.
© Mobile Climate Control 55
Blower Heater Model 205
Features
A more heavy duty option than the 202. The 205 offers the same installation flexibility.
Part Descriptions: Specifications
Part No. No. Part No. Description No. Part No. Description
Specifications
12-050312-0504
123456
6A
6B6C6D6E
78910
11
24-022524-022624-019924-013322-006015-050315-050425-007025-007525-002125-001725-002225-0020
28-001424-006024-004524-006624-006723-011023-0125
HeatingAir FlowCurrent
Weight3-Speed motor.
Heater 12VHeater 24V
CasingCoverGrillMounting BracketHeater CoilBlower Assy. 12VBlower Assy. 24VMotor 12VMotor 24VBlower WheelBlower HousingClipMotor Tape
GrommetGrill Grill Front (4 x 2”HA) Front (4 x 2 1/2”HA) Hose Adapter 2”Hose Adapter 2 1/2”
Items 8-11 are optional and have to be ordered separately.
- 24700 Btu/hr (7240 W) - 295 CFM (500 m³/h) - 12 Amps/12V- 6 Amps/24V- 13.5 lbs. (6 kg)
© Mobile Climate Control 56
Fan Heater Model 209
Features
High capacity design can be used as auxiliary heater for bus, or as stand alone cab heater.
Part Descriptions: Specifications
Part No. No. Part No. Description
Specifications
12-090312-0904
123456
78
24-035324-035424-035524-013324-022325-034425-010725-012122-0029
Heating - 32000 Btu/hr (9380 W) Air Flow - 350 CFM (595 m3/h) Current - 12 Amps/12V - 6 Amps/24VWeight - 25.5 lbs. (11.5 kg) 2-Speed motor.
Heater 12VHeater 24V
CasingCoverGrillMounting BracketMotor BracketMotor 12VMotor 24VFan C.W. (8”) Heater Coil
© Mobile Climate Control 57
Fan Heater Model 211
Features
Similar design as our popular 201. The 211 offers a higher quality heater with controllable air doors.
Part Descriptions: Specifications
Part No. No. Part No. Description No. Part No. Description
Specifications
12-110312-1104
12345678
9
10111213
24-014024-014224-014324-013323-000924-014124-011324-0171
25-010525-010725-002328-001422-002325-0095
Heating -21000 Btu/hr (6150 W) Air Flow -265 CFM (450 m3/h) Current -5.8 Amps/12V -2.9 Amps/24VWeight -9 lbs. (4 kg) 3-Speed motor.
Heater 12VHeater 24V
CasingCoverCoverMounting BracketDoor (3 Pcs.) VenturiMotor BracketCoil Protector
Motor 12VMotor 24VFanGrommetHeater CoilResistor
© Mobile Climate Control 58
Blower Heater Model 212
Features
A higher capacity heater than the 202 and 205, the 212 equipped with hose adapters offers installation flexibility for defrosting and cab ducting requirements.
Part Descriptions: Specifications
Part No. No. Part No. Description No. Part No. Description
Specifications
12-120312-120412-122312-1224
12345678
9
9A
9B9C9D9E
24-005524-005624-101123-012524-005724-005824-001222-0090
15-151315-151425-005325-007625-004825-034825-006025-020025-0022Heating -36000 Btu/hr (10550 W)
Air Flow -400 CFM (680 m3/h) Current -14 Amps/12V -8 Amps/24VWeight -12 lbs. (5.5 kg) 3-Speed motor.
Heater 12V (w.24-0056) Heater 24V (w.24-0056) Heater 12V (w.24-1011) &Heater 24V (w.23-0125) (5x)
CasingCoverCover (5 HA’s) Hose Adapter 2 1/2”Coil BracketCoil BracketMounting BracketHeater Coil
Blower Assy. 12VBlower Assy. 24VMotor 12V, 3-SpeedMotor 24V, 3-SpeedBlower HousingHousing TopVenturiBlower WheelClip (B.W.)
© Mobile Climate Control 59
Fan Heater Model 213
Features
Slim design allows for mounting in tight spots. Can be wall mounted with heater connectors exiting the back of the unit.
Part Descriptions: Specifications
Part No. No. Part No. Description
Specifications
12-130112-1302
1234567
24-112024-112125-112222-019624-011025-002325-010525-0107
Heating -12500 Btu/hr (3660 W) Air Flow -150 CFM (255 m3/h) Current - 5.8 Amps/12V - 2.9 Amps/24VWeight - 7 lbs. (3.2 kg) 2-Speed motor.
Heater 12VHeater 24V
CasingCoverFan GuardHeater CoilMotor BracketFanMotor 12VMotor 24V
© Mobile Climate Control 60
Fan Heater Model 214
Features
With a larger capacity than the 213, the 214 offers flexible mounting solutions for wall mount situations. Fittings exit the side of the 214.
Part Descriptions: Specifications
Part No. No. Part No. Description
Specifications
12-141112-1412
1234
5678
24-004224-004322-007325-003925-004325-001528-001425-002825-0067
Heating -18500 Btu/hr (5420 W) Air Flow -175 CFM (300 m3/h) Current -4.4 Amps/12V -2.2 Amps/24Weight -9 lbs. (4 kg) 3-Speed motor and internally grounded.
Heater 12VHeater 24V
CasingCoverHeater CoilMotor 12VMotor 24VFanGrommetSwitchKnob
© Mobile Climate Control 61
Fan Heater Model 216
Features
High capacity heating solution for buses, fire trucks and truck bodies. The 216 delivers maximum performance for large capacity heating requirements.
Part Descriptions: Specifications
Part No. No. Part No. Description No. Part No. Description
Specifications
12-160112-160212-162112-1622
12345
6
7
89101112
24-013024-013124-013224-010524-014624-016224-016322-003822-0039
25-010525-010724-011025-002328-001028-000428-0011Heating -42000 Btu/hr (12300 W)
Air Flow -500 CFM (850 m3/h) Current -11.6 Amps/12V -5.8 Amps/24VWeight -18.5 lbs. (8.4 kg) 2-Speed motor.
Heater 12V -R.H.C.Heater 24V -R.H.C.Heater 12V -B.C.Heater 24V -B.C.
CasingGrill (Inlet) Front (Outlet) CoverCoil SupportCoil Support (B.C.) Coil Support (B.C.) Heater CoilHeater Coil (B.C.)
Motor 12VMotor 24VMotor BracketFanSnap-in PlugGrommetSnap-in Plug
© Mobile Climate Control 62
Fan Heater Model 222
Features
The compact design of the 222 is ideal for dash or under seat mounting.
Part Descriptions: Specifications
Part No. No. Part No. Description
Specifications
12-225112-2252
12345678
91011
24-016724-014224-016124-013324-014124-011024-017125-010525-010725-002322-003328-0014
Heating -21000 Btu/hr (6150 W) Air Flow -265 CFM (450 m3/h) Current -5.8 Amps/12V -2.9 Amps/24VWeight -9 lbs. (4 kg) 2-Speed motor.
Heater 12VHeater 24V
CasingCoverCoverMounting BracketVenturiMotor BracketCoil ProtectorMotor 12VMotor 24VFanHeater CoilGrommet
© Mobile Climate Control 63
Fan Heater Model 226
Features
The 226 was designed to offer flexible mounting and deliver air directly out front of the heater.
Part Descriptions: Specifications
Part No. No. Part No. Description
Specifications
12-2611 1234567891011
24-017324-013624-016024-013324-013824-011024-017225-010525-002322-005228-0014
Heating -13500 Btu/hr (3960 W) Air Flow -185 CFM (315 m3/h) Current -5.8 AmpsWeight -4.5 lbs. (2 kg) 2-Speed motor.
Heater 12V Side PlateCoverCoverMounting BracketVenturiMotor BracketCoil ProtectorMotor 12VFanHeater CoilGrommet
© Mobile Climate Control 64
Low Amp Heater Model 234
Part Descriptions: Specifications
Part No. No. Part No. Description
Specifications
12-342112-3422
12345
24-110524-110624-110724-004125-017225-0244
Heating Air Flow Current
Weight
- 3425 Btu/hr (1000 W)- 60 CFM (102 m3/h)- 0.35 Amps/12V- 0.18 Amps/24V- 3 lbs. (1.36 kg)
Features
The low amp current of the 234HD allows for mounting in applications such as motor homes, where an auxiliary heater is required.
Heater 12VHeater 24V
Casing (Front) Casing (Rear) Mounting BracketHeater CoilFan 12VFan 24V
© Mobile Climate Control 65
Fan Heater Model 238
Features
The 238 is ideal for underseat mounting. Air is disbursed to the front of the unit.
Part Descriptions: Specifications
Part No. No. Part No. Description
Specifications
12-381112-3812
12345
6789
24-014724-014824-014922-011025-010525-010725-004125-011029-003928-0014
Heating -22500 Btu/hr (6600 W) Air Flow -250 CFM (425 m3/h) Current -4 Amps/12V -2 Amps/24VWeight -11.5 lbs. (5.2 kg) 2-Speed motor.
Heater 12VHeater 24V
CasingTop CoverSide CoverHeater CoilMotor 12VMotor 24VFanMotor BracketRetaining RingGrommet
© Mobile Climate Control 66
Fan Heater Model 239
Features
The 239 is our largest capacity fan heater - ideal for buses and other large capacity requirements.
Part Descriptions: Specifications
Part No. No. Part No. Description
Specifications
12-390312-3904
1234567
89
24-035624-035724-013324-035824-022322-003025-034425-010725-012128-0004
Heating - 64000 Btu/hr (18760 W) Air Flow - 800 CFM (1360 m3/h) Current - 13 Amps/12V - 6.5 Amps/24VWeight - 25 lbs. (11.3 kg) 2-Speed motor.
Heater 12VHeater 24V
CasingCoverMounting BracketGrillMotor BracketHeater CoilMotor 12VMotor 24VFan (8” C.W.) Grommet
© Mobile Climate Control 67
Fan Heater Model 245
Features
The 245 offers the ability to control fan speed with a control on the box. Ideal for auxiliary heaters or small cab applications.
Part Descriptions: Specifications
Part No. No. Part No. Description No. Part No. Description
Specifications
12-450312-4504
123456789
101112131415
16
22-014023-004823-000923-004524-011024-017524-089024-089124-0892
24-089324-089425-002325-002925-006725-010525-010728-0014
Heating -20000 Btu/hr (5860 W) Air Flow -265 CFM (450 m3/h) Current -5.8 Amps/12V -2.9 Amps/24VWeight -8.5 lbs. (3.8 kg) 2-Speed motor.Heater is internally grounded.
Heater 12VHeater 24V
Heater CoilAdapterDoorLouverMotor BracketBaseCoil ProtectorCoverSide (L)
Side (R) VenturiFan (6.6” C.C.W.) SwitchKnobMotor 12VMotor 24VGrommet
© Mobile Climate Control 68
Low Amp Heater Model 247
Features
The 247 is another option for low amp heater requirements.
Part Descriptions: Specifications
Part No. No. Part No. Description
Specifications
12-470112-4702
12345
24-111424-111524-001222-017125-017225-0144
Heating -8700 Btu/hr (2550 W) Air Flow -130 CFM (220 m3/h) Current -0.70 Amps/12V -0.35 Amps/24VWeight -6.1 lbs. (2.8 kg) 1-Speed motor.
Heater 12VHeater 24V
CasingCoverMounting BracketHeater CoilFan 12VFan 24V
© Mobile Climate Control 69
Fan Heater Electric Model 290N (North America only)
Part Descriptions: Specifications
Specifications No. Part No. Description No. Part No. Description
Heating
Air flowCurrentWeight
2kW (36V)1.6kW (48V)220 CFM (339.8m3/h)55A (36V)42A (48V)18 lbs. (8.16kg)
34566788
23-014523-017125-043525-116025-116925-137225-148125-2459
LouverLouverKnobHeater Element 48VHeater Element 36VCircuit Breaker 8A/80VCirucit Breaker 50A/80VCircuit Breaker 60A/80V
11121314151617
25-120425-137325-176025-176124-479624-479728-0722
ContactorResistor 10Ω (12-9038)Resistor 4Ω (12-9050)Resistor 2.5Ω (12-9038/12-9050)Casing Stainless SteelCover Stainless SteelOverlay
Items 1,6,10 to 14 are not shown
© Mobile Climate Control 71
Air Conditioner Model 301
Features
The 301 is a compact air conditioner that is ideal for small cabs. It can be wall mounted or used as a stand alone floor mount.
Part Descriptions: Specifications
Part No. No. Part No. Description No. Part No. Description
Specifications
13-012113-0122
12345678
8A8B8C
8D910111213141516171819
24-158424-158524-158624-158724-158824-194124-194215-050315-050425-001725-002125-007025-0076
25-002221-027626-016227-0602 26-000623-000523-004825-002925-004525-006725-006825-0586
Cooling -15700 Btu/hr (4600 W) Air Flow -200 CFM (340 m3/h) Current -13 Amps/13.5V -6.5 Amps/27VWeight -19 lbs. (8.6 kg)
Casing made of 18GA (1.25mm) Cold Rolled Steel and finished in black semi-gloss epoxy powder coat.
Air Conditioner 12VAir Conditioner 24V
CasingCoverCoil Bracket (R) Coil Bracket (L) Blower SupportMounting Bracket (R) Mounting Bracket (L) Blower 12VBlower 24VBlower HousingBlower WheelMotor 12VMotor 24V
ClipEvaporator CoilExpansion ValveO-Ring #8Bulb ClampLouverAdapterBlower SwitchThermostatKnobKnobWiring Harness
© Mobile Climate Control 72
Air Conditioner Model 302
Features
The 302 is a compact unit that can be ducted to deliver air flow where desired. Ideal for dash or compartment mounting.
Part Descriptions: Specifications
Part No. No. Part No. Description No. Part No. Description
Specifications
13-0221 Air Conditioner 12V13-0222 Air Conditioner 24V
1 28-0001 Case2 28-0002 Bezel3 23-0011 Louver4 23-0028 Louver Strip5 25-0032 Switch Plate6 21-0003 Evaporator Coil7 25-0677 Motor 12V 25-0678 Motor 24V8 25-0021 Blower Wheel
9 26-0006 Bulb Clamp10 26-0162 Expansion Valve11 27-0602 O-Ring #812 25-0029 Switch13 25-0030 Thermostat14 25-0059 Nut Cover15 25-0067 Knob16 25-0068 Knob17 25-0679 Wiring Harness (Not Shown)
Cooling -17950 Btu/hr (5260 W) Air Flow -250 CFM (425 m3/h) Current -11 Amps/13.5V -5.5 Amps/27VWeight -9 lbs. (4 kg) 3-Speed motor.
© Mobile Climate Control 73
Heater-Air Conditioner Model 306
Features
The 306 is ideal for under seat or dash mounting. It’s high performance capacity can handle most cab requirements. It can also be used in limousine applications.
Part Descriptions: Specifications
Part No. No. Part No. Description No. Part No. Description
Specifications
13-0651 Heater-AC 12V13-0652 Heater-AC 24V
1 24-0035 Casing2 24-0404 Cover3 24-0497 Blower Plate4 15-1513 Blower 12V 15-1514 Blower 24V4A 25-0048 Blower Housing4B 25-0348 Housing Top4C 25-0053 Motor 12V 25-0076 Motor 24V4D 25-0060 Venturi
4E 25-0200 Blower Wheel4F 25-0271 Motor Mount5 21-0005 Combo Coil6 23-0038 Hose Adapter 2 1/2”7 25-0069 Thermostat8 26-0162 Expansion Valve9 27-0602 O-Ring #810 26-0006 Bulb Clamp11 28-0021 Snap-in Plug12 29-0139 Half Clamp 5/16”
Heating -33000 Btu/hr (9675 W) Cooling -22500 Btu/hr (6685 W) Air Flow -400 CFM (680 m3/h) Current -14 Amps/13.5V -7 Amps/27VWeight -19 lbs. (8.6 kg)
Casing made of 18GA (1.25mm) Cold RolledSteel and finished in black semi-gloss epoxy powder coat.
© Mobile Climate Control 74
Heater-Air Conditioner Model 309
Features
The 309 is a compact unit that can be ducted to deliver air flow where desired. Ideal for dash or compartment mounting.
Part Descriptions: Specifications
Part No. No. Part No. Description No. Part No. Description
Specifications
13-0953 Heater-AC 12V13-0954 Heater-AC 24V
1 28-0016 Case2 28-0006 Bezel3 21-0012 Combo Coil4 25-0070 Motor 12V 25-0076 Motor 24V5 25-0021 Blower Wheel
6 28-0019 Venturi (R) 7 28-0020 Venturi (L) 8 26-0162 Expansion Valve9 27-0602 O-Ring #810 26-0006 Bulb ClampHeating -20200 Btu/hr (5920 W)
Cooling -15100 Btu/hr (4425 W) Air Flow -310 CFM (530 m3/h) Current -11 Amps/13.5V -5.5 Amps/27VWeight -10.5 lbs. (4.8 kg) 3-Speed motor.Casing made of ABS.
© Mobile Climate Control 75
Heater-Air Conditioner Model 310
Features
The 310 is a compact unit that can be used as a free blowing or ducting unit to direct air around the cab. A remote mount control panel is required for this system.
Part Descriptions: Specifications
Part No. Specifications
13-1003 Heater-AC 12V13-1004 Heater-AC 24V13-1023 Air Conditioner 12V13-1024 Air Conditioner 24V13-1090 Plenum Assy. Incl.19A, 19B, 19C
Heating -25500 Btu/hr (7480 W) Cooling -19775 Btu/hr (5800 W) Air Flow -300 CFM (510 m3/h) Current -12 Amps/13V -6 Amps/27VWeight -27.3 lbs. (12.4 kg)
Made of 18GA (1.25mm) Cold RolledSteel and finished in black semi-glossepoxy powder coat.
Pictured with optional cover (item 19) installed.
© Mobile Climate Control 76
Dimension Profiles
8B8C8D
9101112
1314
25-002125-002225-022825-029821-036422-031925-006925-060125-060225-066426-0190
Part Descriptions: Specifications
No. Part No. Description
12345678
8A
24-212424-212524-212624-216624-216724-216824-221115-055115-055225-0017
CasingMounting Bracket Blower PlateCover PlateGrillFront CoverExpansion Valve Bkt.Blower 12VBlower 24VBlower Housing
No. Part No. Description No. Part No. Description
1516171819
19A19B19C2021
26-026326-039927-060228-003113-1090
24-239623-000523-004828-000428-0009
Blower WheelClipMotor 12VMotor 24VEvaporatorHeater CoilThermostatResistor 12VResistor 24VWiring HarnessBlock Valve
Knurled KnobAir FilterO-RingPVC HosePlenum Assy.Inc. 19A, B, C.PlenumLouverAdapterGrommetGrommet
© Mobile Climate Control 77
Heater-Air Conditioner Model 316
Features
The 316 is designed for behind the seat installations or for sleeper bunks. It is also designed to duct air around the cab. The blower can be rotated as shown in dimension profiles.
Part Descriptions: Specifications
Part No. Specifications
13-160113-160213-1690
Heating -32500 Btu/hr (9525 W) Cooling -26500 Btu/hr (7770 W) Air Flow -350 CFM (595 m3/h) Current -24 Amps/12V -12 Amps/24VWeight -26 lbs. (11.8kg)
The unit is supplied w/o heater valve and de-icing thermostat, which haveto be installed if needed.
Heater-AC 12VHeater-AC 24VPlenum Assy.Inc. 19A -19D
© Mobile Climate Control 78
Dimension Profiles
Features
The 316 is designed for behind the seat installations or for sleeper bunks. It is also designed to duct air around the cab. The blower can be rotated as shown in dimension profiles.
Note: 13-1690 Plenum AssyMade of 18GA CRS & Finishedin Black Semi-Gloss EpoxyPowder Coat.
1011
1213
1415
25-009825-013625-055225-053825-067525-067626-019026-0263
Part Descriptions: Specifications
No. Part No. Description
123456789
24-242524-242624-242724-243124-243224-250121-039522-033925-0668
CasingCoverCover PlateMotor PlateHose AdapterFilter GrillEvaporator CoilHeater CoilBlower Housing
No. Part No. Description No. Part No. Description
16171819*19A19B19C19D
26-043027-010527-060213-169023-012523-000624-331724-3316
Blower WheelResistor 12VResistor 24VWiring HarnessMotor 12VMotor 24VBlock ValveKnurled Knob
Air FilterVent TubeO-Ring #8Plenum AssyHose Adapters 2.5”Cover PlateCoversPlenum
Item 19 is optional and has to be ordered seperately.
© Mobile Climate Control 79
Heater-Air Conditioner Model 320
Features
The 320 is a universal wall mounted unit that can handle the requirements of most off-road cabs. An outside filter kit and damper door can be added for outside air.
Note:
Switch is not as depicted in photo, has been changed to sealed rocker switch.
Part Descriptions: Specifications
Part No. Specifications
13-202113-202213-205113-2052
Heating -28000 Btu/hr (8200 W) Cooling -21000 Btu/hr (6150 W) Air Flow- 380 CFM (646 m3/h) Current -18 Amps/13.5V -9 Amps/27VWeight -40 lbs. (18 kg) 3-Speed blower.
Made of 18GA (1.25mm) Cold RolledSteel and finished in black semi-gloss epoxy powder coat.
Heater-AC 12VHeater-AC 24VAir Conditioner 12VAir Conditioner 24V
© Mobile Climate Control 80
Dimension Profiles
Features
The 320 is a universal wall mounted unit that can handle the requirements of most off-road cabs. An outside filter kit and damper door can be added for outside air.
9E
9F10
1112131415161718192021
25-066525-065025-027125-012025-013924-083622-020721-021226-002527-022527-005926-019027-060228-011025-004526-0095
Part Descriptions: Specifications
No. Part No. Description
123456789
9A9B9C9D
24-118224-118324-118424-118524-118624-123024-124324-118715-150315-150225-004825-034825-006025-0200
CasingTop CoverFront CoverFilter HolderFlapperH.C. Cover PlateE.C. Cover PlateBlower BracketBlower 12VBlower 24VBlower HousingBlower Housing TopVenturiBlower Wheel
No. Part No. Description No. Part No. Description
22
23242526272829303132333435
25-063125-063225-004425-043523-000523-004824-032026-024226-024328-001428-000426-025824-118824-112825-0436
Motor 12VMotor 24VMotor MountResistor 12VResistor 24VMounting PlateHeater CoilEvaporator CoilHeater ValveHeater Hose 5/8”Gear ClampBlock ValveO-Ring #8OverlayThermostatRotary Control
Switch Push 12VSwitch Push 24VBlower SwitchKnobLouverAdapterCover PlateBowden CableBowden CableGrommetGrommetFilterFlapper HolderControl PlateWiring Harness(Not Shown)
© Mobile Climate Control 81
Heater-Air Conditioner Model 321
Features
The 321 was designed for ambulance installation. It can be used for any deck mounting application. The high capacity of the 321 makes this unit ideal for ambulance and large cabs.
Part Descriptions: Specifications
Part No. No. Part No. Description No. Part No. Description
Specifications
13-2155 Heater-AC 12V 1 24-0539 Casing2 24-0274 Cover3 24-0275 Front4 15-1513 Blower 12V4A 25-0048 Blower Housing4B 25-0348 Housing Top4C 25-0060 Venturi4D 25-0200 Blower Wheel4E 25-0053 Motor 12V 4F 25-0271 Motor Mount5 21-0046 Evaporator Coil
6 22-0130 Heater Coil7 26-0162 Expansion Valve8 26-0006 Bulb Clamp9 25-0029 Switch10 25-0045 Thermostat11 25-0072 Knob12 23-0055 Louver13 27-0602 O-Ring #814 28-0004 Grommet15 28-0021 Snap-in Plug
Heating -40000 Btu/hr (11720 W) Cooling -27300 Btu/hr (8000 W) Air Flow -450 CFM (765 m3/h) Current -17 Amps/12VWeight -31 lbs. (14 kg)
Made of 18GA (1.25mm) Cold Rolled Steel and finished in black semi-gloss epoxy powder coat.
© Mobile Climate Control 82
Heater-Air Conditioner Model 325
Features
The 325 is a universal unit that fits all ducting requirements.
Part Descriptions: Specifications
Part No. Specifications
13-250313-2504
Heating -36000 Btu/hr(10500 W) Cooling -28500 Btu/hr (8350 W) Air Flow -450 CFM (765 m3/h) Current -16 Amps/13.5V -8 Amps/27VWeight -19 lbs. (8.6 kg)
Permanent magnet motor with ball bearings.Casing made of 18GA (1.25mm) ColdRolled Steel and finished in black semi-gloss powder coat.
Heater-AC 12VHeater-AC 24V
© Mobile Climate Control 83
Dimension Profiles
Features
The 325 is a universal unit that fits all ducting requirements.
6B6C6D6E
6F78
25-034825-006025-020025-064525-065025-027121-009122-0348
Part Descriptions: Specifications
No. Part No. Description
123456
6A
24-002724-002824-001324-001724-003315-150115-150225-0048
CasingCoverCoverCoil Cover (H) Mounting BracketBlower 12VBlower 24VBlower Housing
No. Part No. Description No. Part No. Description
910
11121314
23-012525-013625-055225-067126-019027-060225-0069
Housing TopVenturiBlower WheelMotor 12VMotor 24VMotor MountEvaporator CoilHeater Coil
Hose Adapter 2.5”Resistor 12VResistor 24VWiring HarnessBlock ValveO-Ring #8Thermostat
© Mobile Climate Control 84
Heater-Air Conditioner Model 330
Features
Although similar in design and function, the 330 is a larger capacity unit than the 320. It is ideal for street sweepers and large off-road cabs.
Outside air can be achieved by adding a filter kit.
Note:
Switch is not as depicted in photo, has been changed to sealed rocker switch.
Part Descriptions: Specifications
Part No. Specifications
13-306113-306213-306313-306413-3067
Heating -42200 Btu/hr(12370 W) Cooling -28500 Btu/hr (8350 W) Air Flow -450 CFM (765 m3/h) Current -22 Amps/13.5V -11 Amps/27VWeight -38 lbs. (17.2 kg)
Permanent magnet motor with long life brushes.3-Speed blower.Made of 18GA (1.25mm) Cold Rolled Steel and finished in black semi-gloss epoxy powder coat.Items 31-35 are optional and have to be ordered separately
Heater-AC 12VHeater-AC 24VAir Conditioner 12VAir Conditioner 24VHeater 12V
© Mobile Climate Control 85
Dimension Profiles
Electrical ConnectionsOrange - Power (+) Black - Ground (-) White - To Compressor/Pressure SwitchBlue - To Condensor/Relay (if fan condensor)
9F10111213141516171819
202122
24-027124-116022-007821-006326-002527-022527-005926-019027-060225-043525-063125-063226-009526-032025-0044
Part Descriptions: Specifications
No. Part No. Description
123456789
9A9B9C9D9E
24-115724-115824-115924-020524-029024-027924-024224-029115-150315-150225-004825-034825-006025-020025-066525-0650
CasingFront CoverTop CoverProtection CoverMounting Bracket (L) Mounting Bracket (R) Coil BracketFresh Air CoverBlower 12VBlower 24VBlower HousingBlower Housing TopVenturiBlower WheelMotor 12VMotor 24V
No. Part No. Description No. Part No. Description
232425
2627282930*31*32*33*34*35*36
25-004524-083625-012025-013928-001428-011024-112823-000523-004823-008723-011023-012524-201826-042525-0436
Motor MountBlower MountHeater CoilEvaporator CoilHeater ValveHeater Hose 5/8”Gear ClampBlock ValveO-Ring #8KnobSwitch Push 12VSwitch Push 24VRotary ControlBowden CableBlower Switch
ThermostatResistor BracketResistor 12VResistor 24VGrommetOverlayControl PlateLouverAdapterBall LouverHose Adapter 2”Hose Adapter 2.5”GrillAir FilterWiring Harness(Not Shown)
© Mobile Climate Control 86
Heater-Air Conditioner Model 344
Features
The 344 is a unit that has the condenser mounted in the same compartment as the heater-air conditioner. This unit is mounted on the side of any cab and blows air into a louver console. Outside air is standard.
Note:
Switch is not as depicted in pho-to, has been changed to sealed rocker switch.
Part Descriptions: Specifications
Part No. Specifications
13-440113-4402
Heating -34000 Btu/hr (9960 W) Cooling -17000 Btu/hr (4980 W) Air Flow -265 CFM (450 m3/h) Current -33.4 Amps/3.5V -16.7 Amps/27VWeight -77 lbs. (35 kg)
Casing made of 16GA (1.5mm) ColdRolled Steel and finished in black semi-gloss epoxy powder coat.
Heater-AC 12VHeater-AC 24V
© Mobile Climate Control 87
Dimension Profiles
/ Pressure Swit ch
1111A11B11C
121314151617181920
21222324
2526
15-751225-057725-057925-062125-062221-031821-031922-029223-000523-004823-014825-004425-004525-025125-021925-022125-034325-043525-063125-063225-101526-0018
Part Descriptions: Specifications
No. Part No. Description
12345678910
10A10B10C10D10E
10F10G
10H11
24-222924-223024-191924-223124-192124-192224-192324-192424-201015-156115-156225-004825-034825-006025-020025-065525-066025-027125-060125-060229-013015-7511
Casing Assy.Cover Assy.Sight Glass CoverDrain Pan Assy.Recirc. GrillFilter CoverBottom PlateR/D BracketPlenumBlower 12VBlower 24VBlower HousingBlower TopVenturiBlower WheelMotor 12VMotor 24VMotor MountResistor 12VResistor 24VResistor BracketFan Assy. 12V
No. Part No. Description No. Part No. Description
27282930313233343536373839404142434445464748
26-004126-019026-026326-034726-035026-037427-003027-009127-050227-060127-060227-060327-110727-110827-112128-000528-004528-021034-016434-016726-002528-0191
Fan Assy. 24VVenturiFanMotor 12VMotor 24VEvaporator CoilCondenser CoilHeater CoilLouverAdapterFinger GuardBlower SwitchThermostatRelay 12VRelay 24VSocket/RelayPressure SwitchKnobSwitch Push 12VSwitch Push 24VWiring HarnessDrier Receiver
Air FilterBlock ValveKnurled KnobBowden CableRotary ControlAir Filter (Recirc.) Drain HoseDrain Hose ClampClampO-Ring #6O-Ring #8O-Ring #10Refr. Hose Assy. #6P-Clamp #8Gear ClampGrommetGrommetReticulated FoamCopper Tube Assy.Copper Tube Assy.Heater ValveOverlay
© Mobile Climate Control 88
Heater-Air Conditioner Model 345
Features
The 345 is an excellent choice for armored cars and large cabs. Its many options include outside air, rear air damper control, and side air louvers.
Part Descriptions: Specifications
Part No. Specifications
13-450313-450413-459013-4595
Heating -46000 Btu/hr(13480 W) Cooling -33000 Btu/hr (9670 W) Air Flow -450 CFM (765 m3/h) Current -22 Amps/13.5V -11 Amps/27VWeight -48 lbs. (22 kg)
Made of 18GA (1.25mm) Cold Rolled Steel and finished in black semi-gloss “texture” epoxy powdercoat.13-4595 Rear Outlet Flapper Kit includes 1 piece 26-0350, 25-0581, 26-0421 and 26-0079 with hardware. Kit is optional and has to be ordered separately
Heater-AC 12VHeater-AC 24VAir Plenum Assy.Rear Outlet Flapper Kit
Note:
Switch is not as depicted in photo, has been changed to sealed rocker switch.
© Mobile Climate Control 89
Dimension Profiles
Optional
11C11D11E
11F11G
11H121314151617181920
25-006025-020025-022825-029825-027125-060125-060229-013021-036222-031823-000523-004825-004425-011825-030725-058125-0669
Part Descriptions: Specifications
No. Part No. Description
1234567891010A10B10C11
11A11B
24-223524-223624-223724-223824-223924-224024-224124-224224-224313-459024-244723-000523-004815-155115-155225-004825-0348
CasingFace CoverFront CoverGrillBlower SupportControl BracketControl BracketProtection CoverFlapper DoorAir Plenum Assy.PlenumLouverAdapterBlower 12VBlower 24VBlower HousingHousing Top
No. Part No. Description No. Part No. Description
212223242526
272829303132333435
26-002526-007926-019026-035026-040026-0421
26-042226-042327-005927-022527-060226-026328-021228-021324-2274
VenturiBlower WheelMotor 12VMotor 24VMotor MountResistor 12VResistor 24VResistor BracketEvaporator CoilHeater CoilLouverAdapterBlower SwitchThermostat Assy.SwitchKnobWiring Harness(Not Shown)
Heater ValveCable ClampBlock ValveRotary ControlAir FilterBowden Cable(R/A-Option) Bowden Cable (F/A) Bowden Cable (Heat) Gear ClampHeater HoseO-Ring #8Knurled KnobOverlayOverlayMounting Bracket
© Mobile Climate Control 90
Heater-Air Conditioner Model 346
Features
The 346 is a compact overhead with a heater option. Its compact design makes it an excellent choice for many off-road cabs.
The convenient swing-down unit makes for easy service.
Note:
Switch is not as depicted in pho-to, has been changed to sealed rocker switch.
Part Descriptions: Specifications
Part No. Specifications
13-460313-460413-462313-4624
Heating - 17500 Btu/hr (5130 W) Cooling - 17300 Btu/hr (5070 W) -AC only - 14250 Btu/hr (4180 W) - Heater-ACAir Flow - 250 CFM (425 m3/h) Current - 12 Amps/13.5 V - 6 Amps/27VWeight - 33 lbs. (15 kg)
3-Speed motor.Made of 18GA (1.25mm) Cold Rolled Steel finished in black textured epoxy.
* Only for Heat/AC version.** Only for AC version
Heater-AC 12VHeater-AC 24VAir Conditioner 12VAir Conditioner 24V
© Mobile Climate Control 91
Dimension Profiles
1011121314
15
16
1718192021
23-004825-002925-011825-043525-063125-063225-0633*25-0634*25-0636**25-0637*26-019026-037527-060228-000428-0005*
Part Descriptions: Specifications
No. Part No. Description
1234567
7A7B7C
8
9
24-199124-199224-197924-198024-198124-198215-053315-053425-001725-002125-064325-064421-0315**21-0314*23-0005
Casing Assy.Cover Assy.Coil BracketCoil BracketDrain PanFilter HolderBlower 12VBlower 24VBlower HousingBlower WheelMotor 12VMotor 24VEvaporator CoilCombo Coil (HE) Louver
No. Part No. Description No. Part No. Description
222324
25
26272829303132
33
28-001228-0013**26-034826-019425-025125-021925-022128-017328-017429-022129-022229-007529-007629-007728-0185
AdapterBlower SwitchThermostatKnobSwitch Push 12V(AC) Switch Push 24V(AC) Switch Push 12V (Heat) Switch Push 24V (Heat) Wiring HarnessWiring HarnessBlock ValveAir FilterO-Ring #8GrommetGrommet
Snap-in PlugSnap-in PlugSolenoid Valve 12VSolenoid Valve 24VRelay 12VRelay 24VSocket RelayOverlayOverlayLatchLatch HookReceptacleStud, Oval SlottedRetainerReticulated Foam
© Mobile Climate Control 92
Heater-Air Conditioner Model 347
Features
The 347 is a larger capacity version of the 346. The coils can be flipped to either side of the unit to accommodate different installations.
Outside air is available. This high capacity unit will handle most off-road cabs.
Part Descriptions: Specifications
Part No. Specifications
13-470313-470413-472313-472413-4795
Heating -40000 Btu/hr (11720 W) Cooling -21000 Btu/hr (6150 W) Air Flow -450 CFM (765 m3/h) Current -23 Amps/13.5V -11.5 Amps/27VWeight -49 lbs. (22.2 kg)
3-Speed motor.Made of 18GA (1.25mm) Cold Rolled Steel and finished in black textured epoxy powder coat.* Only for Heat/AC version.Heater and Evaporator Coil can be changed to have opposite connections.
Heater-AC 12VHeater-AC 24VAir Conditioner 12VAir Conditioner 24VHeater Conv. Kit
Note:
Switch is not as depicted in photo, has been changed to sealed rocker switch.
© Mobile Climate Control 93
Dimension Profiles
9F9G
9H1011121314151617
181920
25-027125-060125-060229-013021-031322-0290*23-000523-004825-004425-011825-043525-063125-063225-063826-0025*26-0190
Part Descriptions: Specifications
No. Part No. Description
123456789
9A9B9C9D9E
24-221524-221624-195624-195724-195824-222824-196024-196115-156115-156225-004825-034825-006025-020025-065525-0660
Casing Assy.Cover Assy.Coil BracketCoil BracketDrain PanCoil Support Assy.Coil SupportFilter HolderBlower 12VBlower 24VBlower HousingHousing TopVenturiBlower WheelMotor 12VMotor 24V
No. Part No. Description No. Part No. Description
21222324252627282930
31323334
26-0350*26-037626-0377*27-0059*27-0225*27-060228-000428-001228-017228-018728-0189*29-022129-022229-007529-007629-0077
Motor MountResistor 12VResistor 24VResistor BracketEvaporator CoilHeater CoilLouverAdapterBlower SwitchThermostatKnobSwitch Push 12VSwitch Push 24VWiring HarnessHeater ValveBlock Valve
Rotary ControlAir FilterBowden CableGear ClampHeater Hose 5/8”(HD) O-Ring #8GrommetSnap-in PlugOverlayReticulated FoamReticulated FoamLatchLatch HookReceptacleStud, Oval SlottedRetainer
© Mobile Climate Control 94
Heater-Air Conditioner Model 353
Features
The 353 was designed for log loader applications in Western North America. It is available in many different hose adapter options.
It also has a 32” cover option for cab wall mount applications.
Part Descriptions: Specifications
Part No. Specifications
13-530313-5304
Heating -46000 Btu/hr (13480 W) Cooling -34000 Btu/hr (9970 W) Air Flow -450 CFM (765 m3/h) Current -10.2 Amps/27V -20.4 Amps/13.5VWeight -44 lbs. (22 kg)
Made of 18GA (1.25mm) Cold RolledSteel and finished in black epoxy powder coat.Dim. marked (*) are inlet and outlet openings.Items 18 to 28 are optional and have to be or-dered separately.
Heater-AC 12VHeater-AC 24Vt
© Mobile Climate Control 95
Dimension Profiles
67891011121314151617
21-033722-029925-006925-066126-002526-019027-005927-009127-022527-042127-060228-0031
Part Descriptions: Specifications
No. Part No. Description
12345
5A5B5C5D5E
5F
24-220424-220524-220624-220715-203315-203425-015925-016425-004724-023425-026525-027025-013625-0552
CasingCoverBlower MountProtection CoverBlower 12VBlower 24VBlower HousingVenturiBlower WheelMotor MountMotor 12VMotor 24VResistor 12VResistor 24V
No. Part No. Description No. Part No. Description
1819202122232425262728
23-016023-016123-016223-016523-016724-143624-221224-152426-041226-026313-539113-5392
Evaporator CoilHeater CoilThermostatWiring HarnessHeater Control ValveBlock ValveGear ClampDrain Hose ClampHeater HoseDrain ValveO-Ring #8PVC Hose
HA Plate (2x4”) HA Plate (4x3”) HA Plate (4x2 1/2”) HA Plate (2x3”/2x2 1/2”) HA Plate (2x4”/2x2”) Cover PlateGrill SupportGrillAir FilterKnurled KnobPlenum 12VPlenum 24V
© Mobile Climate Control 96
Heater-Air Conditioner Model 360
Features
The 360 was designed to offer a variety of installation options. It can be set up with an outside air or positive fan pressurizer. It is also available with heat. A water and corrosion resistant condenser ensures years of service. Four nylon latches allow easy service access.
Part Descriptions: Specifications
Part No. Specifications
13-602313-602413-6095
Heating -46000 Btu/hr (13500 W) Cooling -27000 Btu/hr (7900 W) Air Flow -400 CFM (680 m3/h) Current -40 Amps/12V -20 Amps/24VWeight -77 lbs. (35 kg)
Made of 14 (1.5mm) and 16 (1.5mm) GACold Rolled Steel and finished in grey semi-gloss epoxy powder coat.Items 47 to 49 are optional and have to be ordered separately.
Air Conditioner 12VAir Conditioner 24VHeater Conv. Kit
© Mobile Climate Control 97
Dimension Profiles
17181920
2122
22A22B22C
22D2324252627282930313233343536
29-023628-024225-022125-025125-021925-011815-750115-750225-057725-057925-059125-059229-016723-014828-022129-023528-024425-034334-039734-039827-060227-060134-026127-060334-036426-019023-0048
Part Descriptions: Specifications
No. Part No. Description
12345678910
10A10B10C10D10E
10F10G
10H111213141516
24-221924-220824-222124-227024-242924-242824-250524-222624-243015-156115-156225-004825-034825-006025-020025-065525-066025-013025-060125-060229-013021-034121-033924-243328-024326-001827-1121
Casing Assy.Cover Assy.Drain PlateCoil SupportR.D. BracketBracketPlateCover PlateAir PlenumBlower 12VBlower 24VBlower HousingHousing TopVenturiBlower WheelMotor 12VMotor 24VMotor MountResistor 12VResistor 24VResistor BracketCondenser CoilEvaporator CoilFilter SupportReticulated FoamReceiver DrierGear Clamp 4”
No. Part No. Description No. Part No. Description
37383940
4142
43
4445
464747A47B47C47D47E47F47G47J4849
23-000525-004425-043525-063125-063225-069325-068925-068625-068825-068528-022527-003027-009128-024813-609522-030134-026726-007427-022527-005926-034526-044125-043516-020016-030316-0304
Draw Latch Assy.FoamSocket RelayRelay 12VRelay 24VThermostatFan Assy. 12VFan Assy. 24VVenturiFanMotor 12VMotor 24V“C” ClipFinger GuardEPDM SealCable Assy.Air FilterPressure SwitchCopper Tube 3/8”Copper Tube 1/2”O-Ring #8O-Ring #6Copper Tube Assy.O-Ring #10Copper Tube 3/8”Block ValveAdapter
LouverBlower SwitchKnobSwitch Push 12VSwitch Push 24VWiring HarnessFuse 40A/12V (Blower) Fuse 20A/24V (Blower) Fuse 30A/12V (Fan) Fuse 15A/24V (Fan) GasketDrain HoseDrain Hose ClipOverlayHeater Conv. KitHeater CoilCopper Tube Assy.Heater ValveHeater Hose 5/8”Gear ClampRotary ControlBowden CableKnobFilter UnitFilter Kit 12VFilter Kit 24V
© Mobile Climate Control 98
Heater-Air Conditioner Model 369
Features
The 369 is a low profile roof mount heater-air conditioner.
Part Descriptions: Specifications
Part No. Specifications
13-690313-6904
Heating -28000 Btu/hr (8200 W) Cooling -20000 Btu/hr (5860 W) Air Flow -275 CFM (468 m3/h) Current -12 Amps/12V -6 Amps/24VWeight -30.9 lbs. (14 kg)
Casing made of 18GA (1.25mm) ColdRolled Steel and finished in grey epoxy powder coat.
Combo Unit 12VCombo Unit 24V
© Mobile Climate Control 99
Dimension Profiles
7b7c7d7e7f7g7h7j7k7k7L8910
23-004825-004425-011825-043528-016128-024828-016628-024425-110625-110526-035027-060234-056028-0230
Part Descriptions: Specifications
No. Part No. Description
12345666a6b6c6c6d777a
24-284224-284321-039924-271824-272115-053315-053425-001725-002125-064425-064325-002226-058426-058323-0005
Casing AssemblyCover AssemblyEvaporator CoilValve mtg. brkt (L) Coil Support (Long) Blower 12VBlower 24VBlower HousingBlower WheelMotor 24VMotor 12VClipAir Plenum Assy. 24VAir Plenum Assy. 12VLouver
No. Part No. Description No. Part No. Description
111213
14151617181920
24-272224-271927-0225
27-005922-037626-002528-022525-073726-019026-0590
AdapterBlower SwitchThermostatKnobEPDM Seal (10mm) OverlayHook TapeAir FilterRocker Switch (G) 24VRocker Switch (G) 12VRotary Control w/nutO-Ring #8Copper Tube Assy.Reticulated Foam
Coil Support BracketValve Mtg. Bracket (R) Heater Hose(2x70mm&180mm) Gear ClampHeater CoilHeater ValveGasketWiring HarnessBlock ValveBowden Cable
© Mobile Climate Control 101
Electric Condenser Model 402
Features
The 402 is an excellent light duty application condenser. It provides the option of deck or roof mounting.
Part Descriptions: Specifications
Part No. No. Part No. Description No. Part No. Description
Specifications
14-020114-0202
1234
4A
4B4C
567
24-159124-159221-027815-751115-751225-0577
25-057925-062125-062228-000528-001423-0148
Capacity
Air FlowCurrent
Weight
Condenser 12VCondenser 24V
Casing CoverCondenser CoilFan Assy. 12VFan Assy. 24VVenturi
FanMotor Assy. 12VMotor Assy. 24VGrommetGrommetFinger Guard
-to support a coolingcapacity of 26500 Btu/hr (7770 W) -1025 CFM (1735 m3/h) -21.2 Amps/13.5V-10.6 Amps/27V-24 lbs. (11 kg)
Electric condensers are used when radiator mounted types cannot be installed. The reasonsbeing insufficient air flow and/or when additional heat load over the engine cannot be tolerated.Condensing capacity will remain constant and will not be dependent on engine RPM.
Casing made of 14/18GA (2/1.25mm) ColdRolled Steel finished in black semi-gloss epoxy powder coat.
© Mobile Climate Control 102
Electric Condenser Model 403
Electrical Connections2-way male weather packconnector, packar d#12010973 (MCC #31-1068)with male terminal#12124582-L (2x)(MCC #31-1039) and seal#12010293 (2X)(MCC #31-1024)
Electrical Connections2-way deutsch plug DT06 - 2S(MCC #31-1123) with #W2S wedge(MCC #31-1124) and 2 contact s14/16Ga #0462-209-1614 (MCC#31-1125)
Features
The 403 is a compact high performance condenser.
Part Descriptions: Specifications
Part No. No. Part No. Description No. Part No. Description
Specifications
14-030114-0302
12333A3B
3C3D3E
24-251421-041215-760415-760125-057725-0728
25-077825-059129-016629-0197Capacity -To support a cooling
capacity of 29700 Btu/hr (8700 W) Airflow -1150 CFM (1950 m3/h) Current -19.2 Amps (at 13.5V) -9 amps (at 27V) Weight -28.7 lbs (13kg)
Note: Casing made of 16GA satin coatsteel, endplates made of 14GA satin coatsteel and both finished in black semi glossepoxy powder coat.
Condenser 12VCondenser 24V
CasingCondenser CoilFan Assembly 24VFan assembly 12VVenturiFan
Motor 24VMotor 12V#10-32 Hex. Socket“C” Clip
Electrical condensers are used when radiator mounted types cannot be installed. The reasonsbeing insufficient air flow and /or when additional heat load over the engine cannot be tolerated.Condensing capacity will remain constant and will not be dependent on engine RPM.
© Mobile Climate Control 103
Electrical Connections :2-way male weather pack connector ,packard #12010973 (MCC #31-1068)with male terminal #12124582-L)(2x)(MCC #31-1039) and seal #12010293(2x) (MCC #31-1024)
Electric Condenser Model 405
Features
The 405 is a compact, high capacity unit. Its compact design allows for wall or flush mounting applications in engine compartments. A motor with longer life than in the 403 is used in this condenser which makes it slightly deeper.
Part Descriptions: Specifications
Part No. No. Part No. Description No. Part No. Description
Specifications
14-051314-0514
1233A
3B
3C
3D
3E456
24-289221-041215-755115-755225-057725-0579
25-074525-074629-0166
29-016723-014824-363924-3640
Capacity
Air FlowCurrent
Weight
Condenser 12VCondenser 24V
CasingCondenser CoilFan Assy. 12VFan Assy. 24VVenturiFan
Motor 12VMotor 24V#10 -32 HEX.Socket CTR.Sunk“C” clipFinger GuardBracket, Left (Opt.) Bracket, Right (Opt.)
-to support a cooling capacityof 29650 Btu/hr (8700 W) -1150 CFM (1950 m3/h) -17 Amps (1.35V) -8.5 Amps at (27V) -28.5 lbs. (13 kg)
Electric condensers are used when radiator mounted types cannot be installed. The reasons being insufficient air flow and /or when additional heat load over the engine cannot be tolerated.Condensing capacity will remain constant and will not be dependent on engine RPM.
Casing made of 16GA (1.5mm) Satin Coat Steel.Endplates made of 14GA (2mm) Satin Coat Steel. Both are finished in black semi-gloss epoxy powder coat.
Items 5 and 6 have to be ordered separately.
© Mobile Climate Control 104
Electric Condenser Model 406
Features
The 406 is a deck or roof mount condenser that has the receiver/drier mounted internally. The hose can exit either side of the 406. Condenser must be mounted as shown in picture.
Part Descriptions: Specifications
Part No. No. Part No. Description No. Part No. Description
Specifications
14-061114-0612
123456789
10
11
1213141516171819
24-014524-015924-199324-199825-030925-043424-034324-023421-012225-047025-0490
25-025125-021925-022126-022025-034327-028828-000528-001327-060125-0451
Capacity -to support a cooling capacity of 23600 Btu/hr (6925 W) Air Flow -950 CFM (560 m3/h) Current -14 Amps/13.5V -7 Amps /27VWeight -30 lbs. (13.6 kg)
Casing made of 16GA (1.5mm) and mount-ing brackets of 14GA (2mm) Cold Rolled Steel finished in black semi-gloss epoxy powder coat.
Condenser 12VCondenser 24V
CasingCoverMounting Bracket (L) Mounting Bracket (R) Venturi Assy. Motor SupportReceiver Drier BracketMountCondenser CoilMotor 12VMotor 24V
Relay 12VRelay 24VSocket, RelayReceiver DrierPressure SwitchRefr. Hose Assy. #6GrommetSnap-in PlugO-Ring #6Wiring Harness
Electric condensers are used when radiator mounted types cannot be installed. The reasonsbeing insufficient air flow and /or when additional heat load over the engine cannot be tolerated.Condensing capacity will remain constant and will not be dependent on engine RPM.
© Mobile Climate Control 105
Electric Condenser Model 407
Features
The 407 is a larger capacity version of the 406. With the receiver/drier mounted internally, installation time is minimized. Condenser must be mounted as shown in picture.
Part Descriptions: Specifications
Part No. No. Part No. Description No. Part No. Description
Specifications
14-070114-0702
123456789
10
1112
1314151617181920
24-119924-120024-198425-038825-043424-034324-023421-020325-047025-049025-0181
25-010825-025125-021925-022126-022025-034327-028828-000528-001327-060125-0451
Capacity -to support a cooling capacity of 29000 Btu/hr (8500 W) Air Flow -1100 CFM (1870 m3/h) Current -14 Amps/13.5V -7 Amps /27VWeight -33 lbs. (15 kg)
Casing made of 16GA (1.5mm) and mounting brackets of 14GA (2mm) Cold Rolled Steel finished in black semi-gloss epoxy powder coat.
Condenser 12VCondenser 24V
CasingCoverMounting Bracket VenturiMotor SupportReceiver Drier BracketMountCondenser CoilMotor 12VMotor 24VFan
FanRelay 12VRelay 24VSocket, RelayReceiver DrierPressure SwitchRefr. Hose Assy. #6GrommetSnap-in PlugO-Ring #6Wiring Harness
Electric condensers are used when radiator mounted types cannot be installed. The reasonsbeing insufficient air flow and /or when additional heat load over the engine cannot be tolerated.Condensing capacity will remain constant and will not be dependent on engine RPM.
© Mobile Climate Control 106
Electric Condenser Model 408
Features
The 408 was designed for large capacity requirements in the forestry, construction and mining industries. Its three fan design ensures high capacity performance in the most demanding conditions. Receiver/drier mounted internally. Condenser must be mounted as shown in picture.
Part Descriptions: Specifications
Part No. No. Part No. Description No. Part No. Description
Specifications
14-085114-0852
1234567
8910
11121314151617181920
24-096424-096524-096624-096721-016625-018525-019025-010824-023425-043425-0309
26-021925-029725-030827-037327-060128-000528-000425-045028-001328-0011
Capacity
Air FlowCurrent
Weight
Condenser 12VCondenser 24V
CasingCoverSide CoverReceiver Drier BracketCondenser CoilMotor 12VMotor 24VFan C.C.W.Motor MountMotor SupportVenturi Assy.
Receiver DrierMountPressure SwitchRefrigerant Hose #6O-Ring #6GrommetGrommetWiring HarnessSnap-in PlugSnap-in Plug
Electric condensers are used when radiator mounted types cannot be installed. The reasons being insufficient air flow and /or when additional heat load over the engine cannot be tolerated. Condensing capacity will remain constant and will not be dependent on engine RPM.
-to support a coolingcapacity of 29000 Btu/hr(8500 W) -1050 CFM (1785 m3/h) -20 Amps/13.5V-10 Amps/27V-47 lbs. (21.3 kg)
Casing made of 16GA (1.5mm) and mount-ing bracket of 14GA (2mm) Cold Rolled Steel finished in black semi-gloss epoxy powder coat.
© Mobile Climate Control 107
Electric Condenser Model 409
Features
The 409 is a universal mount electric condenser. It does not have the receiver/drier mounted internally. This allows for many different installation options. Condenser can be mounted vertically or horizontally.
Part Descriptions: Specifications
Part No. No. Part No. Description No. Part No. Description
Specifications
14-090114-0902
123456
789
1011
24-196724-196624-196821-030925-038825-0434
24-023425-018125-047025-049025-063528-0045
Capacity -to support a cooling capacity of 28500 Btu/hr (8350 W) Air Flow -1100 CFM (1870 m3/h) Current -14 Amps/13.5V -7 Amps/27VWeight -46 lbs. (21 kg)
Condenser 12VCondenser 24V
CasingGrillCoverCondenser CoilVenturiMotor Support
Motor MountFanMotor 12VMotor 24VWiring HarnessGrommet
Electric condensers are used when radiator mounted types cannot be installed. The reasonsbeing insufficient air flow and/or when additional heat overload the engine cannot be tolerated.Condensing capacity will remain constant and will not be dependent on engine RPM.
Casing made of 16GA (1.5mm) Cold RolledSteel finished in black semi-gloss epoxypowder coat.
© Mobile Climate Control 108
Electric Condenser Model 410
Features
The 410 was designed for high capacity off-road applications. Its large design has flexible hose routing options. The receiver/drier is mounted internally. Condenser must be mounted as shown in picture.
Part Descriptions: Specifications
Part No. No. Part No. Description No. Part No. Description
Specifications
14-100114-1002
1234567
89101112
1314
151617181920212223
24-092524-092624-092724-092824-092921-018825-047025-022925-030224-096324-023424-096226-0219
25-030825-025125-021925-022127-037927-060128-005725-039428-004528-000528-001327-0012
Capacity -to support a cooling ca-pacity of 41600 Btu/hr(12200 W) Air Flow -1900 CFM (3230 m3/h) Current -24 Amps/13.5V -12 Amps/27VWeight -65 lbs. (29.5 kg)
Condenser 12VCondenser 24V
CasingCoverFan Mounting PlateCover PlateReceiver Drier BracketCondenser CoilMotor 12V (B.B.) Motor 24V (B.B.) FanMotor BracketMotor MountMotor SupportReceiver Drier
Pressure SwitchRelay 12VRelay 24VSocketRefrigerant Hose #6O-Ring #6Vibration MountWiring HarnessGrommetGrommetPlastic PlugHose Clamp #6
Electric condensers are used when radiator mounted types cannot be installed. The reasons being insufficient air flow and /or when additional heat load over the engine cannot be tolerated. Condensing capacity will remain constant and will not be dependent on engine RPM.
Casing made of 16GA (1.5mm) Cold Rolled Steel and finished in black semi-gloss epoxy powder coat.
© Mobile Climate Control 109
GND - BLACK
CGND - WHITE PWM / LI - BLUE
UN - REDD C B A
PED WP 4-WAY SHROUD CONNECTORDELPHI PACKARD #12010974
Electric Condenser Model 443
=
K
1
24.0
262.
4
1
1
514.8
476.0
M8 x 1.25 ( x 2 )16
2.1
157.
6 50.0
66.2
213.
8
1AIR FLOW
Part no. No. Part No. Description No. Part No. Description
14-4302 Condenser 24V 12345678910
21-185524-1202224-1204024-1204124-1204224-1204324-1204425-308926-001826-1916
CONDENSERReceiver BracketCondenser CasingCondenser Supp. BackCondenser SupporterReceiver SupportCondenser CoverFan EBM 24VReceiver DrierMCC Label for 14-4302
11121314151617181920212223242526
27-008227-060127-121128-034528-034829-031529-050029-051429-052029-062629-055529-075329-125231-116434-481029-1455
P-Clamp #08O-Ring #6Gear Clamp 3"Plastic Cap #6Plastic Cap #8Pop Rivet 3/16"x.44"Washer M6 SSWasher M5 SSBolt M6x20 SSBolt M5x12 SSWasher M6 S.S.Bolt M6x12 SSLock Washer M6Conduit 3/8" L=300mmCopper Tube 3/8"M8 LOCKNUT w/NYLON IN
SpecificationsHeatingAir flowCurrentWeight
23.000 Btu/hr1000 CFM2.0 AMPS10.7KG(13.8KG with mountingbrackets and mtg. fastners)
Part Descriptions: Specifications
© Mobile Climate Control 110
Condensors Radiator Mount MCC’s heavy duty radiator mounted condensers are the least expensive alternative compared to forced air types. They are manufactured using 0.008-0.010” (0.20mm-0.25mm) thick aluminum fins and copper tubes, with endplates made of 16GA (1.5mm) satin coat steel. Waved or corrugated fins are available, as indicated on the drawings. In addition to the heavy fin thickness, the edges are rippled, increasing the strength further. Low fin density makes cleaning easier and provides less pressure drop. Please keep in mind that the MCC condensers are developed for off-road environments. Condensers are painted black. In and outlet tubes are reinforced with metal brackets where required. All coils are pressure tested to a minimum of 300 psi (2.1 MPa) .
21-0089 Condenser
21-0176 Condenser
21-0320 Condenser
Note: Capacity based on 100°F (38°C) air temp. and 140°F (60°C) condensing temp. Inlet -3/4-16 UNF Male (O-Ring #8) Outlet -5/8-18 UNF Male (O-Ring #6)
© Mobile Climate Control 111
Condensors Radiator Mount21-0020 Condenser
21-0322 Condenser
21-0324 Condenser
Note: Capacity based on 100°F (38°C) air temp. and 140°F (60°C) condensing temp. Inlet -3/4-16 UNF Male (O-Ring #8) Outlet -5/8-18 UNF Male (O-Ring #6)
© Mobile Climate Control 113
Round Louvers
Louvers shown have diameters of 3.94” (100 mm) and are manufactured of super tough nylon. The ST801 was specially designed for extreme low temperatures. The louvers must be used with any of the adapters below.
23-0045Nylon strap up to 3” diameter
58-62077-003” Round Louver with Louver Ring
23-0171Rotates and closes,adapter include
23-0100Rotates and closes comes with 4” hoseadapter (ABS) . Four screw holes at Ø 4.93”(125.2mm) Used in the RV and motor home industry.
23-0172Rotates and closes, hoseadapter 2” included
23-0065Non adjustable, mounts in 3”(76.2mm) hole.Mounting spring included.Low cost (ABS) .
Above louvers are manufactured of prime grade ABS. The overall Ø 2.75” (70 mm), screw hole Ø 2.204” (56 mm) (4x), mounting hole Ø 2.10” (53.5mm). Adapter will also accept snap in installation without screws.
Y23-00002-00Louver, 2.5 in fixed vane
58-62077-00Louver, air diffuser, round, gen5
23-0005Round Louver
© Mobile Climate Control 114
Ball Type Louvers (ABS)
23-0164Black ball, hose adapter 2” included
23-0067Black ball, hose adapter 2.5” included
23-0057Chrome ball, hose adapter2.5” included
Louvers23-0164, 23-0057, 23-0067, and 23-0087 Mount in a Ø2.5” (63.5 mm) hole.
23-0087Black ball, adapter included
23-0097Large black ball, adapter includedmounts in a Ø 3” (76.2mm) hole.
23-0098Large black ball, hose adapter Ø 2.5” includedLouvers 23-0097 and 23-0098 mounts in a Ø 3”(76.2mm) hole.
© Mobile Climate Control 115
23-00423.65” (92.2mm) x 1.88” (47.8mm) , (ABS)
snaps into hole 3.41” (86.6mm) x 1.72” (43.7mm)
23-00296” (152.4mm) x 1.87” (47.6mm) , (ABS)
snaps into hole 5.73” (145.5mm) x 1.72” (43.7mm)
23-00466” (152.4mm) x 1.562” (39.7mm), (ABS)
snaps into hole5.75” (146mm) x 1.375” (34.9mm)
23-00557.1” (180.3mm) x 3.3” (83.8mm) , (ABS)
snaps into hole 6.38” (162.1mm) x 2.48” (63mm)
23-0054Adapter for 23-0053 with 2.5” (63.5mm)
hose adapter. (ABS)
23-00272.45” (62.2mm) x 2.44” (62mm) , (ABS) 2” hose adapter included, snaps into hole
2.2” (55.9mm) x 2.375” (60.3mm)
23-00535.43” (137.9mm) x 2.68” (68.1mm) ,
(ABS) fits hole 4.75” (120.7mm) x 2” (50.8mm)
23-01165.43” (138mm) x 2.17” (55mm) , (ABS)
snaps into hole 5.12” (130mm) x 1.81” (46mm)
Rectangular and Square Louvers (closable and adjustable)
58-62042-00LOUVER, RECTANGULAR, GEN. 5
© Mobile Climate Control 116
Rectangular and Square Louvers (closeable & adjustable)
DIMENSIONS
ABOVE LOUVERS SNAP INTO 1/16” (1.59mm) TO 1/8” (3.19mm) WALL THICKNESS OPENINGS
Part No.Overall Size Mounting Hole
Snap-inHose*
Adapterin. mm in. mm
23-0173 2.62 x 3.45 66.5 x 87.6 2.02 x 2.85 51.3 x 72.4 yes no
23-0174 3.82 x 5.64 97.0 x 143.3 2.82 x 5.13 71.6 x 130.3 yes no
23-0175 3.82 x 7.87 97.0 x 199.9 2.85 x 7.34 72.4 x 186.5 yes no
23-0176 3.82 x 10.11 97.0 x 256.8 2.82 x 9.61 71.6 x 244.1 yes no
*Louvers available on request with Ø2.5” (63.5 mm) hose adapter as a one piece design.
DIMENSIONS
ABOVE LOUVERS SNAP INTO 1/16” (1.59mm) TO 1/8” (3.19mm) WALL THICKNESS OPENINGS
Part No.Overall Size
Mounting Hole Snap-inHose*
Adapterin. mm
23-0177 2.17x 6.08 55.1 x 154.4 request sample yes No
23-0178 2.17 x 6.08 55.1 x 154.4 request sample yes No
23-0173 23-0175
23-0176
23-017823-0177
23-0174
© Mobile Climate Control 117
Hose Adapter ø 2" (50.8 mm)
23-0203 Hose Adapter ø 2.5" (63.5 mm)
Rectangular and Square Louvers (closable and adjustable)
Hose Adapters
23-0186 23-0145Louver Vents
23-0186 23-0145
23-0203
© Mobile Climate Control 118
Filter Kit 605 - Pressurizer
Airflow
Part Descriptions: Specifications
No. Part No. Description
43K3J3H3G3F3E3D1
29-023029-074629-074529-074429-074328-062328-062228-062125-0013
HEX NUT (10-32)BASE INSERT (M6)¼ - 20X5” SLOT SCREW¼ - 20X1.25” HEX HEAD BOLTHEX LOCK NUT (1/4-20)BASESPACERSOUTLETFAN
No. Part No. Description
3C3B3A32
28-062028-061928-088128-064925-0894
MOTOR MOUNT LOUVER MOUNT Ø3” INLET BODY ASSY. (Ø3” INLET MOTOR 24V
© Mobile Climate Control 119
Flex Hose23-01022” Low friction, non collapsible,sold in length of 47” (1200 mm) 23-01042.5” Low friction, non collapsible,sold in length of 47” (1200 mm)
23-001523-002023-002523-003523-0040
2” Collapsible sold in multiples of 50 feet2.5” “ “3” “ “3.5” “ “4” “ “
Adapters
23-0048Adapter, Nylon 66
23-0006Cover plate (ABS)
Mounting hole Ø 3.1” (79mm) . Screw hole 4 x Ø 84 mm.
23-0017Hose adapter, 2”
23-0018Hose adapter, 2.5”
23-0032Hose adapter, 3”,
Nylon 66
23-0143Hose adapter, 60mm, Nylon 66