1
EMPLOYEES’ STATE INSURANCE CORPORATION MODEL HOSPITAL
KATHA VILLAGE, OPPOSSITE GILLETTE FACTORY . BADDI. ( H.P) 173205
e-mail – [email protected] Ph:- 01795-650805, 650806
RE-TENDER NOTIFICATION
Tender inquiry no 02/2014-Mandi
Sub: Supply of Equipments and Instruments
Sealed and super scribed Item wise tenders in Single bid and Two Bid System (as specified in the tender document available in the website) are invited from manufacturers/ authorized dealers/ distributors for the supply of good quality Equipments/ instruments for the use of following departments of ESIC Medical college, Mandi (H.P)
1. Department of Human Anatomy
2. Department of Human Physiology
3. Department of Biochemistry
● Detailed information regarding the items, application/tender form, specifications and other information, terms and conditions are given in the tender document available in the website www.esic.nic.in. The application forms can be downloaded or available after payment of Rs 500 Demand Draft in Name of ESIC fund account no 1 payable at baddi. From MS office, Baddi. In case form is downloaded from website Rs 500 DD in name of ESIC fund account no 1 payable at baddi for Tender fees and the EMD amount should be attached separately to the tender documents. ● Last date for receipt of completed tender Documents: 31/03/2014 up to 01.00.p.m. or if it happens to be holiday on next working day. The tenders will be opened as scheduled below at 11.00.AM. in the Conference hall of the ESIC model hospital Baddi (H.P). ● The undersigned reserves the right to accept or reject any or all the bids without assigning any reason at any stage.
Medical Superintendent
S.no Department Date of Opening
1 Human Anatomy 01/04/2014
2 Human Physiology 01/04/2014
3 Biochemistry 01/04/2014
2
EMPLOYEES’ STATE INSURANCE CORPORATION MODEL HOSPITAL
KATHA VILLAGE, OPPOSSITE GILLETTE FACTORY . BADDI. ( H.P) 173205
e-mail – [email protected] Ph:- 01795-650805, 650806
RETENDER DOCUMENT
Sealed tenders are invited by Medical Superintendent the ESIC model hospital Baddi (H.P).
for the supply of following items:-
Department of Anatomy
NEW S.no
OLD S.no
Items Quantity EMD Bid system
1 3 Embalming workstation with embalming machine with cadaver injector
2 2500 Single
2 4 Electrically operated hand drill 2 500 Single 3 5 HAND SAW (S.S) 3 100 Single 4 6 Meat cutting machine for thin body
sections (trans& vertical) for gross anatomy sectional study
1 2000 Single
5 7 Brain knife (S.S.) Slicing (Meat knife) 3 150 Single 6 9 X – Ray Viewing lobby 3 ( 4 film
view) 3600 Single
7 10 Portable/ceiling fixed LCD Projector with dedicated computer system including overhead projector
1 900 Single
8 11 Mobile/portable pedestal operating/surgical light
6 9000 Single
9 12 Simple S.S. Stretcher trolley for cadaver transport
3 250 Single
10 23 Balance ear hanger 2 300 Single 11 25 Laboratory refrigerator:(for anatomy &
Physiology) 3 1800 Single
12 27 BAND SAW FOR SECTIONING BODY AND LIMBS
1 3250 Two
13 28A Manual Rotary Microtome 1 10000 Two 14 29 Skeletons articulated (with Box ) 5 21000 Two 15 30 bones (disarticulated) sets 25 112500 Two
3
Department of Physiology NEW S.no
OLD S.no
Items Quantity EMD Bid system
16 33 Stethography 10 8000 Single 17 34 Spirometry System 10 12000 Single 18 35 Recording spirometer/ benedict’s roth
spirometer /apparatus
3 3000 Single
19 36 Wright’s peak flow meter 3 1000 Single 20 37 Compact CPR training mannequins 1 300 Single 21 38 Mosso’s ergograph 6 1750 Single 22 39 Mechanical respirator 1 150 Single 23 40 ECG Single channel 3 1750 Single 24 41 ECG Machine –multi channel 3 7250 Single 25 42 Physiograph single channel 3 7500 Single 26 43 Clinical Examination couches 8 6000 Single 27 44 Apparatus for continuous passive motion. 1 550 Single 28 45 Bicycle ergometer 1 600 Single 29 46 Dynamometer 1 150 Single 30 52 Electronic Muscle stimulator 2 500 Single 31 53 Experimental physiology set 3 3250 Single 32 54 perimeter; student’s perimeter 2 950 Single 33 55 Ophthalmoscope cum retinoscope 2 400 Single 34 56 Phacoscope 3 1875 Single 35 57 colour perception lantern edridge green 1 500 Single 36 58 Maddox rod 1 250 Single 37 59 compass aesthesiometer 10 500 Single 38 60 Thermoaesthesiometer 3 50 Single 39 61 Algometer 3 1250 Single 40 62 Olfactometer 1 250 Single 41 63 All quartz distillation apparatus (physiology
& Biochemistry)
4 30000 Two
42 65 EEG Machine Recorder – portable 1 10500 Two 43 66 Electromyogram 3 36000 Two 44 67 Audiometry 1 6000 Two 45 68 Multichannel poly graph – computerized 1 12000 Two
Department of Biochemistry NEW S.no
OLD S.no
Items Quantity EMD Bid system
46 81 Flame photometer 2 3300 Single 47 86 Tissue homogenizer complete set 3 2700 Single 48 87 UV lamp with fittings 1 1200 Single 49 89 Paper electrophoresis apparatus 6 8100 Single 50 92 Refrigerator 4 550 Single
4
Tenders complete in all respect, must be deposited in the office of the Medical Superintendent, ESIC Model Hospital, Baddi (H.P) on or before the last date mentioned in the tender notification. The tenders will be opened as scheduled and indicated in the tender notification, in the Conference hall at 11.00 A.M. in the presence of tenderers or their representatives who may like to be present on that day. In case date of opening of tender is declared as holiday tenders shall be received and opened on next working day as per the above mentioned schedule A. Single bid System
Tenderers are to submit in single sealed bid, super scribing as “Single bid Tender for Equipment (Name of the equipment) due on --------------. The envelope should have the name of the quoting company, last date of submission of tender. Each and every page of the quotation should be separately numbered and duly signed. The tender/s should be put in sealed envelope addressed to the Medical Superintendent, ESIC Model Hospital, Baddi (H.P).
· Rates/Price should be typed both in words as well as in figures, free from erasing, cutting and over-writing
· Each and every page of the quotation be separately numbered and duly signed.
· Price and S.T./ VAT must be quoted separately. The price should be all inclusive lump sum including cost of the equipment, freight, insurance, transit insurance, packing forwarding etc. and including charges for installation and commissioning with all the men and material required for the same and for the quoted warranty period.
· The price should be on F.O.R. ESIC Medical college , Mandi (H.P) basis. No other charges in addition will be payable on any account over and above the lump sum price quoted in the price bid except S.T/VAT. The rates quoted in ambiguous terms such as “Freight on actual basis” or “Taxes as applicable extra” or “Packing forwarding extra” will render the bid liable to rejection.
· The price should be quoted in I.N.R.
B. Two Bid System Tenderers are to submit two sealed bids Viz. Techno-commercial Bid and Price Bid separately super-scribing as “Tender for Equipment (Name of equipment) due on……. on first envelope and “Price Bid” for “Tender for Equipment (Name of equipment) due on…… on the second envelope. Both the envelopes should have name of the company quoting the tender, Each and every page of the quotation should be separately numbered and duly signed. Both the envelopes are again to be sealed and put in a single envelope super-scribing name of equipment and name of company, last date of submission of tender addressed to the Medical Superintendent, ESIC Model Hospital, Baddi (H.P) as follows: The tender/s Technical bid and price bid envelops) should be put in sealed envelope addressed to the Medical Superintendent, ESIC Model Hospital, Baddi (H.P), The envelope should be super-scribed as “Tender for Equipment (Name of equipment) due on…….........
5
The contents of price Bid should include following items:
· The information given at Techno commercial bid should be reproduced in price bid with prices indicated.
· Rates/Price should be typed both in words as well as in figures, free from erasing, cutting and over-writing
· Price quoted should match with the items quoted in technical bid.
· Each and every page of the quotation be separately numbered and duly signed.
· Only Techno-commercial bid (Un-Priced bid) will be opened first and shall be referred for the Technical Evaluation. The price bid of only those tenderers whose technical bid is found acceptable by the competent authority will be opened for further action.
· In case the price quoted cannot be matched with the item/s quoted in technical bid the bid shall be liable to be rejected
· Price and S.T./ VAT must be quoted separately. The price should be all inclusive lump sum including cost of the equipment, freight, insurance, transit insurance, packing forwarding etc. and including charges for installation and commissioning with all the men and material required for the same and for the quoted warranty period.
· The price should be on F.O.R. ESI Medical College , Mandi (H.P) basis. No other charges in addition will be payable on any account over and above the lump sum price quoted in the price
bid except S.T/VAT. The rates quoted in ambiguous terms such as “Freight on actual basis” or “Taxes as applicable extra” or “Packing forwarding extra” will render the bid liable to rejection.
· The price should be quoted in I.N.R. The contents of Techno Commercial Bid (for both Single and Two bid tenders)
should include
following items
1 Covering letter indicating the list of enclosures.
2 EMD in accordance with instructions as above.
3 Name and detailed specifications of the quoted Equipment with price Blanked
4 Name and detailed specifications of essential accessories if any with price Blanked
5 Name and detailed specifications of optional accessories if any with price Blanked
6 Warranty Offered 2 Year/s (Minimum for Two Years)
7 Rates of AMC and CAMC minimum for 5 years after expiry of warranty.
8 User list.
9 Statement of deviation parameter wise from specifications if any.
10 Copy of PAN No. /Latest I.T.R.
11 Statement of deviation parameter wise from tendered conditions, if any.
12 Authority letter from manufacturer/ authorized distributor/stockiest if applicable.
13 Name and address of nearest authorized service center
14 Catalogue of the equipment showing the make/model no and specifications
6
15 Declaration/ undertaking on stamp paper as per the proforma enclosed
TERMS AND CONDITIONS GOVERNING CONTRACT
1. The Tenderer must enclose a Demand draft for sum mentioned against each items as earnest money drawn in the favor of ESI Fund A/C No.1.
2. EMD Deposited with earlier tender if any or in any other form as given, will not be adjusted/accepted against this tender. Tender without EMD will not be accepted in any case.
3. Tenderer will have to demonstrate/Sample the quoted item if required to Technical Evaluation Committee within the stipulated time frame as and when asked for or as has been mentioned in the tender. The tender shall be liable to be cancelled on non-compliance of this clause.
4. EMD will be released after finalization of tender to unsuccessful bidder/s.
5. Successful bidder has to deposit 10% of the total cost of equipment as performance security with the Medical Superintendent in the form of Bank guarantee else 10% of the payment due (Rounded-up) shall be with-held which will be released on satisfactory performance of the equipment after expiry of warranty.
6. Either the authorized Indian agent on behalf of the principal/OEM or principal/OEM itself can bid but both cannot bid simultaneously for the same item/product in the same tender.
7. If an agent submits bid on behalf of one principal/OEM, the same agent shall not submit a bid on behalf of another principal/OEM in the same tender for same item/product.
8. The company will get only one chance for demo. In case the company fails to arrange the Demo the tender shall be liable to be cancelled.
9. The date for demonstration shall be fixed with mutual consent on telephone/e-mail the same shall be confirmed in writing and by fax/e-mail. In any case not more than two weeks time shall be given to arrange for demo.
10. In case demo of the equipment is required (if any) the same has to be arranged at medical college/ Hospital Mandi (H.P).
11. Only the item/s of manufacturers or their authorized distributor/stockiest would be considered.
12. Tenderer must provide the telephone and fax no./e-mail with tender for all correspondence.
13. The equipment should be guaranteed /warranted for a minimum period of two years or as mentioned in specifications the from the date of satisfactory inspection, installation and commissioning.
14. Delivery schedule: - Within 45 days after placement of supply order.
7
15. Firm should undertake to enter into Annual Maintenance Contract (AMC/CAMC) for equipment as well as for accessories attached, for minimum period of five years after completion of warranty period and accordingly quote the rates of AMC for five years. The rates quoted should be both for Comprehensive AMC (CMC) as well Non Comprehensive AMC (AMC) for five years. Firm should undertake to keep the equipment in running order throughout the year and in case of equipment going out of order during warranty/AMC/CMC the fault will be attended within 24 hours and rectified within 7 days of lodging the complaint. Failure to rectify the fault would entail downtime penalty @ 0.25% of basic cost of equipment per week.
16. Payment of equipment will be made within two weeks after the successful installation, commissioning, training to user department and satisfactory inspection of the equipment.
17. For the equipment where reagents, cartridge, consumables, etc. are required. The price bid must include:
A) Rate list indicating the prices and packing prevalent on date of tendering, B)List indicating cost and life of consumables 18. Photocopy of latest ITR/ PAN No. Should be enclosed with the completed tender. 19. Tenderer if not a manufacturer, has to submit manufacturer’s authorization certificate.
20. The validity of tender will be for a period of six months from the date of opening.
21. If any accessories like voltage stabilizer, water filtration/ purifier/ soften plant etc. are required with the equipment must be quoted along with the equipment itself.
22. Rates of spares chargeable may be indicated with the tender.
23. The Medical Superintendent has the right to accept or reject any or all the tenders without assigning any reason(s) thereof.
24. The Tenderer is required to submit undertakings as per the Performa enclosed on a nonjudicial stamp paper of Rs.100/-
25. If the equipment needs calibration, the firm shall be responsible for calibration as part of CMC
26. Amount of AMC/CMC as the case may be, shall also be considered for arriving at the lowest cost.
27. Tendrer can contact MS office for any clarification regarding terms and condition / technical specification.
Medical Superintendent
8
UNDERTAKING: (To be submitted in non judicial stamp paper of Rs. 100/=)
1 I/We … (Name of authorized Signatory) the undersigned hereby declare and affirm that I/We
have gone through the terms and conditions governing the tender and undertake to comply
with all terms and conditions.
2 The rates quoted by me are valid and binding upon me for the period of validity of the tender.
3 That the earnest money of Rs._____________ deposited by me/us vide Demand Draft
no.___________ Dt.___________ drawn on…………..(Name of the Bank) is attached herewith.
4 That I/We authorize Medical superintendent to forfeit the earnest money deposited by me/us
in case of any delay or failure to supply the article within the stipulated time and the items of
desired/quoted quality.
5 That I/We will be in the position to provide Annual Maintenance Contract/Comprehensive
Maintenance Contract (AMC/CMC), spare parts, accessories attached and its consumables for 5
years from the date of satisfactory installation of the equipment till the AMC/CMC period is over.
6 That there is no vigilance/CBI case or court case pending against the firm, debarring my firm
to supply of items quoted.
7 That I/We hereby undertake to supply the items as per directions given in supply order within
stipulated period.
8 That I/We undertake to maintain the equipment to the satisfaction of user during the period
of warranty and guarantee.
9 I/We have been informed that the Medical Superintendent has the right to accept or reject
any or all the tenders without assigning any reason thereof.
10 We (Name of firm) undertake that we will provide 3 (Three) preventive service on quarterly
basis during the warranty and AMC/CMC period as offered in our tender and any no. of break
down calls shall also be attended within 24 hrs. I/We also agree that the payment of AMC/CMC
shall be made to me/us on quarterly basis after satisfactory preventive service.
Signature and address of the Tenderer
9
CHECK LIST
S.no Specification
1 Authority letter from manufacturer/ authorize
distributor/ stock
2 Declaration/ undertaking on stamp paper as per
the Performa enclosed
3 Copy of PAN/ Latest I.T.R.
4 Whether the equipment quoted meets all
specifications or not
5 Any deviation from tendered specifications
6 Additional features if any
7 Nearest place for availability of after sales service
8 List of installation provided or not
9 Relevant catalogues enclosed or not
10 Any deviation from terms and conditions of tender
11 Validity of tender (six months)
12 Total cost of equipment including essential
accessories Prices to be
Blanked in techno
commercial bid for
two bid items.
Prices to be
indicated only in
price bid
13 Rates of sales tax/ VAT etc -do- -do-
14 Warranty offered (minimum 24 months after
successful installation and satisfactory inspection) -do- -do-
15 Rate of AMC year wise minimum for five years
after expiry of warranty. -do- -do-
16 Rate of AMC year wise minimum for five years
after expiry of warranty. -do- -do-
10
Specifications of Listed Items Department Wise
Human Anatomy 1 . Embalming workstation with embalming machine with cadaver injector
· Complete workstation containing embalming trolley and embalming machine.
· Suited to equip embalming machine.
· Trolley made of complete SS manufactured without rivets or bolts on the surface
· Manual ratchet system provided for trendelenburg position.
· Embalming machine mounted on the underlying frame for complete system transportation.
· Embalming machine can be dismounted and used separately.
· Provided with heavy castors for easy movement with or without embalming machine.
· Embalming trolley approx 60” lengthX28”widthX34”height
· Embalming machine uses specialized noiseless pump for suction and delivery at preset
optimum pressure.
· Fluid delivery rate 10ltrs./hr.
· SS inner tank with fluid capacity provided.
· Complete SS Outer body mounted provided
· Complete SS outer body mounted on castors
· Approx Size of the EM – 24” lengthX19” width X 14.5” height Embalming machine with its
specialized noise less pump, provide suction and delivery at optimum pressure with a fluid
delivery rate of 10Litres/hr with salient features such as
· SS Inner tank to store fluid capacity 10-15 liters
· Mounted on castors for easy movement and grips provided for lifting
· IV stand fixed for mounting cannula tubing and mains cable
· Mains-on and in use indication provided
· Complete stainless steel outer body and
· Cadaverous injector
For injecting formaldehyde solution in Cadaverous at much higher speed than normal gravity
process. Unit is fully covered and mounted on a portable trolley having four castor wheels for
easy movement. Unit consists of one air compressor fitted with 1/2hp motor which is connected
with a stainless steel tank of 10 liters capacity meant for storing and injecting the solution. Tank
is fitted with a safety valve, pressure gauge and rubber tubing having provision for injection and
supplied complete with electric cord, plug and suitable to work on 220V, 1ph 50hz, AC supply.
11
2. Electrically operated hand drill
Universal hand drill; comprise saggital saw head piece, mini hand drill, transverse saw, triple
drill guide130 angles as well as open gear hand machine drill with S.S. check and key. These
are precision designed in line with defined safety standards and for cadaver use.
3. HAND SAW (S.S)
Hand Saw
Hand saw with high carbon steel blades made at HRD to 52 degrees, hard and durable, anti
rust and smoothness, which leads to less friction, blades chrome plated blades.
Specifications :
For HRC, Blade materials reaches 52 degrees and teeth reaches 60 degrees (+ - 3) Chrome
treatment, antirust, smooth resulting in less friction Elegant Handles, ergonomic Special Teeth
Design, sharp at edges Versatile assortments
4. Meat cutting machine for thin body sections (trans& vertical) for gross anatomy
sectional study
Bone & Meat Cutting Machine:
Useful for preparing specimen of big size in anatomy, fitted with large moving table and
extension table operated on four ball-bearing rollers.
Specifications :– size of cutting table 785 × 585 mm approx ; total table travel 1245 mm
approx ; extension table 455 × 760 mm approx ; size of wheel 455 mm
approx ; height 1700 mm approx ;the table is made of thick S S. Sheet with special heavy axles
for easy and firm movement. Supplied complete with one blade, starter, cord and plug. Suitable
to work on 220 v, single phase, 50 hz, ac supply.
5. Brain knife (S.S.) Slicing (Meat knife)
Knives are of premium quality of cutting instrument segment, high quality stainless steel with
heat-treat our blades.
Features: Edge technology creates a blade that is sharper out of the box, holds its edge longer
and is easier to re-sharpen; Handle materials used are selected from a variety of man-made and
natural materials, providing the best appearance and performance or S.S.,.
12
06. X – Ray Viewing lobby
View Boxes.
• Easy to install slim of 2.5cm or 3 cm thick.
• Latest technology of LED Lamps (High Luminance Emitting Diode). The thermometric
scale of the light source should be over 9300 degrees of Kelvin.
• Acrylic euphotic panel, high finish, uniformity and soft light.
• There should not be dark spot in the viewing area. The uniformity of the viewing screen
should be more than 90%.
• Adjustable with voltage of 90V-240V. Built-in electrical source.
Type 1F 2F 3F 4F
Dimension
W×H×T(mm)
470×545×25 850×545×25 1230×545×25 1640×545×25
Visual size W×H
(mm)
360×440 740×440 1120×440 1500×440
Type of light source HIGH LUMINANCE LED, 100000 Hours
Luminance Adjustment Approx. 90%, Individual panel Luminance
Adjustment
On/Off Control Individual Panel On/Off Control.
Film Activation Switch
7. Portable LCD Projector with dedicated computer system with overhead projector
· Portable LCD Projector
Computer system
· Intel Dual core 2.5Ghz processor with 02 MB cache memory
· Intel chipset G 31 motherboard (make will be gigabyte or asus)
· 1GB DDR2 667 Mhz RAM
· 250GB sata Seagate hard disk (7200RPM)
· 18.5” LCD
· 22X LG Double layer DVD Writer
· ATX Cabinet (Black Silver) or (Red and Black)
13
· Multimedia Key Board & Optical mouse.
· Sound on board
· AGP on Board
· LAN on Board
8.Mobile/portable pedestal operating/surgical light Mobile Surgical Light Features:
Dome: 1 no; 700mm (normal); dome diameter: 500mm (Nominal) 500mm+/-50mm; spring
arm stroke 750mm+/-50mm; field size 150-200mm, 1600mm (Nominal); action radius 1500mm
(nominal), 1,75,000 lux(max.); light output 130000Lux(Max.); color temperature: 4200+/-
300°K; halogen bulb 1no., 7 nos. 12V, 50W each/24V 70W 4 nos. 12V, 50W each/24V 70W; low
voltage unit with CVT 230V AC+/-10% 230V AC +/- 10%; Input supply: 50Hz+/-2% 50Hz+/-
2%; Height adjustment of Dome: 36”
9. Simple S.S. Stretcher trolley for cadever transport
Strong steel tubular frame work of trolley mounted on four 150mm diameter swiveling castors.
Removable stretcher top. Made of S.S. / aluminium seat supported on tubular frame. Pre
treated and epoxy powder coated. Over all approximate size : 2030mm (L)X560mm(W)X820mm
(H)
10. Balance ear hanger
Capacity: 6 Kilos, Sensitivity 1/5gram, plastic scale
Hanger Type circular weighing scales – 1
Dial type analog display; light weight aluminium die cast body; unbreakable convex lens;
matching body and lens ring; sturdy durable and maintenance free;
Or
Spring Type: In graduated tubular aluminium with zero adjustment, provided with top
suspension loop and hook, with dual scale in metric and newton range. 5000grms with precision
of 100 grms.
11. Laboratory refrigerator:
Specifically designed and are suitable for research laboratories, blood bank applications and
across other laboratories working with critical elements. The laboratory refrigerator controls
temperature varying from 2deg. C to 8deg. C. the unit shall be vertical model constructed of
double walls high quality powder coated exterior mild cabinet. The laboratory refrigerator shall
be insulated with high density CFC free Poly urethane foam. The inner chamber is made of S.S.
14
304 grade. With built in micro controller based temperature indicator cum controller having
audio visual alarms. Door locking system for improved security with magnetic door gasket. Air
cooled hermetically sealed compressor.
Technical data
Capacity Internal External
265 Ltr 58X50X97 70X62X158
12. BAND SAW FOR SECTIONING BODY AND LIMBS
Manual Band Sawing Machine
Technical Specifications: � Max. Job Height in mm 200 � Max. Throat in mm 200 � Table Size (L x W in mm) 600 x 600 � Blade Speed in mtr /min. 20 - 100 � Blade Size (L x W x T in mm) 3505 x 27 x 0.9 � Saw Motor Capacity in HP 3 � Coolant Motor Capacity in HP 0.16 � Overall Size (L x W x H in mm) 900 x 700 x 2100 Approx Weight in Kg 400
13 . Manual Rotary Microtome.
Advanced microtome
Modular system with exceptional precision
Best suited for research and routine work in biological, medical or histology lab; guaranteed
over extension protection and sliding – clutch anti – locking system in the coarse advance. ;
Highest precision of sections.
The equipment is supplied complete with Cassette holder; knife holder base; standard knife
holder Object orientation unit; section waste tray; microtome knife 15cm
Technical data
Ranges of thickness 0.5μm to 99 μm
Increments of minimum 0.5μm
1 μm step from 1 μm to 99 μm adjustable
15
Horizontal specimen advance 28mm
Vertical stroke 60mm
Specimen size Up to 30mm X 30mm
Specimen orientation X and Y Axis 8°, Z Axis 360°
Specimen advance automatic In 2 speeds
Advance for trimming 1 – 99 μm adjustable
Electrical data 230Volts, 50cycles single phase AC
14. Skeletons articulated – real human bones – with wooden and glass covered box.
15. Bones (disarticulated) sets – real human bones, lose bones;
16
Dept. of Human Physiology
16. Stethograph
a. Kymographs
b. Mary`s tambour, Corrugated rubber tube
c. Connecting rubber tube
17. Spirometry System
Simple spirometer/ students spirometer/vitalograph: – spirometer – packed withfeatures for the
expert user; colour touch – screen operation; accurate fleisch pneumatachograph; integral clear,
fast printer,; on screen visualization of volume /time and flow/volume curves.
18. Recording spirometer/ benedict’s roth spirometer /apparatus
Spirometer has a 4 speed electrical recording unit with gravity writing ink. Valves are easily
accessible, soda lime chamber with screw connection in the centre chamber, drain to all the
tubes and container. Sampling cock for connecting the patient to spirometer or atmosphere. The
unit is fitted on portable frame, complete with valves, tube, mouth piece, nose clip, ink writing
well and 50 charts.
19. Wright’s peak flow meter
Lower range mini wright PFM (30 – 40ppm) with sterilizeble mouth piece.
20. Compact CPR training mannequins
Economical CPR mannequins constructed of soft realistic vinyl plastic over poly urethane foam
for a human feel. Features include: a longer torso for realistic abdominal thrusts, realistic head
tilt and chin lift for opening airway, can easily be manipulated to realistically stimulate airway
obstruction or choking situations, and a user friendly lung or airway design that eliminates
cleaning. Includes three mouth/nose pieces and three disposable lung/airway systems.
Dimensions: 28”X18”X10”. Nylon carry bag and kneeling pads included with warranty.
21. Mosso’s ergograph
Mosso`s ergograph with metronome and weights. Ergograph containing the advantageous
features of both bubios and mossos ergogrpah with weight set.
17
22. Mechanical respirator
1. Drinker’s tank respirator (Iron lung)
2. sahlin’s jacket model, Brag – paul pulsator
3. foldable canvas stretcher for Eve’s rocking method.
23. ECG Single channel
a) Digital one channel ECG machine
b) Simultaneous 12 leads acquisition
c) Multiple operation mode (Manual/auto/ref. lead)
d) LCD to display operation status and wave – form
e) The wave form is displaying synchronously on the LCD with 195X65 dots
f) AC/DC power, built in rechargeable Ni-MH battery
g) High resolution thermal printing array system
h) High frequency response reach to 150Hz
i) Capable of printing continuous one channel trace and annotations including lead marks and
such parameters as sensitivity, paper speed, and filter operation status.
j) High resolution digital inhibits baseline
k) One touch operation able to enhance efficiency and relieve operation strain
l) Concept of floating input circuit meets IEC safety standard
m) Visual status due to light indicated touch keys
n) Rechargeable battery supporting more than 50 patient examinations
o) Under the automatic mode, pressing key mode continuously can keep recording when
abnormal lead is found.
p) Safety level corresponds to class I, type CF
24. ECG Machine –multi channel
High resolution thermal array printer; 12 channel print out format 5 inch 320X240lcd to display
setting menu and 12 channel ECG wave form automatic measurement and interpretation of ECG
paper size:210mmX20m (roll type) 210X140mmX20m (z-fold type)
18
25. Physiograph
Single channel, electronic recorder and electronic stimulator with
1. Main console – chart drive, pen recording system; main amplifier; coupler housing and
2. Couplers - bio potential coupler; electrocardiogram (EKG); and stain gage coupler;
3. Stimulator
26. Clinical Examination couches
Adjustable head end and feet end– hydraulic type. Metal 16Gauge with good insulation. Must
have 03 drawers and 03 boxes. The bed should have high quality sponge with rexin cover. Must
have stand for BP apparatus. Size should be of min length 2 meter. Width 50 cm and height 80
cm.
27. Apparatus for continuous passive motion.
CPM is used to treat joints of the lower limb after an injury, disease or following surgery. Based
on a concept originated by SALTER IN 1970, this device has varied applications namely
treatment of intra articular fractures, septic arthritis, ligaments tendon healing and also
following total joint replacement to ensure a sufficient range of motion.
To prevent stiffening , the jouint have to be moved continuously which results in the
following.
· Minimize swelling and pain after operation
· Ensures faster recovery and shortened hospital stay
· Prevents extra articular contractures and adhesions.
Ext/Flex Angle indicator at knee position
· Compact and elegant construction
· Electronic controls enable all adjustment of angle to be made on the front panel.
· Smooth and silent movement
· Digital timer with alarm
· Patient safety switch for stopping and reversing the motion.
Specifications
Treatment time 0 – 99 minutes
Reset time 1 to 5 seconds
Angle- Extension 0
Power 230V/AC/50Hz, 75VA
19
28. Bicycle ergometer
Work Load Range: 10 – 600Watt
Independent Rpm: 20 – 130rpm
Work Load range
Dependent RPM
Lap Time: 9h 59min 59sec
Load Steps : 1 – 99 Watt
Time Steps : 1 – 99 Min
Load Programs: Manual
1 Load/Step
PWC 170, 150, 130
HR Steady State
Safety Protection
Automatic Load: Heart rate
Reduction: Blood pressure
Blood Pressure D
Acoustic signal: ECG Alarm Signal
Manual : By Stop Button
Check: Calibration
Dynamic
Static
Adjustments (Height): 83cm – 110cm
Saddle: 68cm – 108mm
Handle bars: free rotation
Accuracy of load: 2% or 3 Watt
Input/output
External Control: RS - 232
Inputs: Analogue control
Start signal
Heart rate
20
Blood pressure s
Blood pressure D
ECG Alarm
Outputs: work load
Pedaling Speed
Step Marker
Power supply: 110 – 240V, 50 – 60Hz
Power consumption: 100VA
Safety Standard: class 1, CE
Dimensions (cm): Base plate 79X48
Weight: approx 46Kg
29. Dynamometer
Especially suitable for use in rehabilitation centers/physiology labs; Real time mode:
immediately shows the patients current strength Peak/Max Mode: shows the maximum strength
of a patient’s grip Average Mode: calculates the average strength from two grips Counting
mode: counts the numbers of presses which exceed a previously defined strength limit;
integrated AUTO – OFF function after 1 minute to preserve the batteries; as part of a
rehabilitation program, this permits medical staff to monitor the fitness of the patients hands
and carry out controlled training exchangeable springs facilitate fast switching of the capacity
(Additional spring sets for 20Kg and 40Kg are included with delivery); safe, comfortable use
thanks to non slip rubber grips Stable case for safe, easy transport and for storage of the
additional spring sets as standard, WXDXH: 350X265X85mm
30. Electronic Muscle stimulator
Research model: Muscle Stimulator Compact Solid-state Microprocessor Controlled unit, with
digital timer and intensity display is useful for functional paralysis resulting from traumatic
neurosis, Hysterical of Neuropraxia, Flaccid Paralysis, Spastic Paralysis, Cardio-vascular disorders
and Muscle Strain etc. The Therapeutic Muscle Stimulator has Galvanic, Interrupted Galvanic,
Faradic and Surge Faradic currents. The unit shall be housed with ABS molded cabinet. Salient
Features Microprocessor controlled Pulse durations: 03,1,10,30,100,300ms Pulse Repetitive
Freq.:0.3,1,3 seconds Intensity variations: 0 130 Volts Technical details
Weight:1.6Kg.Height:139.7mm ,Width:266.7mm Depth:190.5mm Voltage: AC 100 260
Protection Class-I Complieswith IEC 601-1 Option for Built-in rechargeable battery.
21
31. Experimental physiology
Demonstration set including Sherrington starrling kymograph (preferably electrically driven)
myograph stand, indecorum, simple key short circulating key, pohl’s commutator, vibrating,
interrupter, muscle through, muscle liver, muscle grip of femor clamp, hook and weight set,
heart liver, frog board for dissection, enamel tray for above frog board cork line with boss –
head – low voltage unit, for tapping 2 and 4 bolts for stimulation., at each seat-as required.
Note: time makers can also be made available at each seat along with a low voltage unit.
Electronic stimulators, a student type can be used instead of low voltage units. This will also
dispense with the need for induction coil interrupter
1. central low voltage unit (low volts 3 – 6 volts) – battery or rectifier unit and a step down
transformer.
2. the keys – simple key & short circuiting key
3. induction coil (Du – Bois Raymond indecorum)
4. electric kymograph (“ Drum”)/Sherrington starrling kymograph
5. frog muscle chamber (Luca’s Moist chamber; muscle through)
6. writing lever
7. starrling heart liver
8. isometric lever
9. vibrating reed
10. variable interrupter
11. time marking – tuning fork (100 or 256Hz); spring time marker; electromagnetic time
marker.
12. stimulating electrodes
13. student stimulator
14. self ink thermo – paper (like ECG paper)
other accessories
1. langedorff’s apparatus
2. dales organ bath.
32. Perimeter; student’s perimeter
Charting the field of vision; with stand, metal arc; chin rest and chart paper etc
33. Ophthalmoscope cum retinoscope : set of direct ophthalmoscope and retinoscope
22
34. Phacoscope – an instrument for viewing accommodative changes of the eye lens
35. colour perception lantern edridge green
36. Maddox rod – for screen test; Maddox rod lens; red/white/green rim and amp; handle
material: copper handel; length: 70mm,
37. compass aesthesiometer
stainless steel, with well –f formed points and adjusting screw giving movement of app: 01mm
per half turn.
38. thermoaesthesiometer
Horse hair carried in a holder; hair length adjustable with graduated tube and protective cap.
39. Algometer
For measuring pain threshold, Features: digital display of pain pressure threshold; range from
0.5 Kg/cm to 11 kg/cm. very fast and simple to use battery cum mains operation miniature
pocket size 7X13X3cm.
40. Olfactometer
4– choice arena olfactometer (OLFM), complete; 12”X12”X1”, 4 – port/4choice arena
olfactometer w/removable lid. Main body and all inlet and outlet ports made from solid UHMW – Poly ethylene (PE) with 3/8” thick clear plexig has removable lid. System includes an insect
inlet adapter (Note: specify inset size at time of order) and all (4) glass, 2 piece combination
internal odor source (IOS) adapter and insect isolation traps which collect insects responding to
an odor source and prevents them from returning into the arena. Unit also includes a 2-choice
adapter insert which allows the olfactometer to be converted to a two choice system by
blocking off half of the arena area. Olfactometer is supported by (4) – 6” removable legs.
41. All Quartz Distillation Apparatus (05 Ltr Capacity)
With 05 Ltr/Hr, Double stage, Metallic stand and other accessories.
23
42. EEG Machine Recorder – portable
EEG 100B amplifier module with CAP 100 EEG electrode cap/with electrodes and cardiac jelly;
EEG (Electroencephalograph)
Features: A device being used by neurologists Light weight and compact amplifier; USB 2.0
interface/Ethernet interface; synchronized high resolution MPEG-4 video; integrated photic
stimulator; integrated impedance check for electrode connectivity; unlimited nos. of montages;
unlimited continuous recording along with video (optional)
43. Electromyogram
EMG amplifier module/EL 503 shielded snap electrodes or 3 surface electrode/stimulating and
recording electrode, electronic stimulator, a recording system of cathode ray oscilloscope (CRO)/
bio potential coupler.
44. Audiometry
Audiometry & tympanometry in one instrument; special Audiometry window; MPANL (maximum
permissible ambient noise level) specified internationally by standard institutes like OSHA and
ANSI for proper acoustic treatment.
45. Multichannel Polygraph –computerized.
The system should be capable of recording blood pressure, ECG(multichannel), EEG, EMG, EOG,
wireless Heart rate variability, breathing rate. Spirometry, Photo – plethysmography,
Phonocardiography, Pulse rate, grip strength transducer, galvanic skin response, skin
temperature, wireless heart rate and etc.
It should include:-
o 16 channel Data Acquisition system.
o High speed USB interfacing with the computer.
o Range:- ±2 m V to ±10V.
o Minimum sampling rate of 400 KHz (aggregate speed),
o ADC resolution =16 channel on all gain ranges and variable sampling speed on each channel
with continuously record and display up to 32 channels of data.
o The software should have various automatic analysis modules for ECG, HRV, Blood Pressure,
Metabolic studies, Cardiac output, Peak analysis, spike histogram etc.
o Online & offline analysis with various export options like Binary, Axon, IGOR, MATLAB, Excel,
Graph Pad Prism, Quick Time, Wav, Text etc.
24
o The software should have step by step instructions, protocol and experimental design for
performing various experiments in physiology teaching applications. Also should have sample
data for animal experiments for demonstrating to the students.
o Software controlled multichannel ECG resolving LEAD I, II, III, aVF, aVL, aVR and VI to V6
and analysis for vector cardiograph.
o Isolated stimulator along with stimulating electrodes & an audio out jack for playback
into headphones.
o A fully isolated, GSR amplifier to analysis the startle response to visual, auditory or
somatosensory stimuli with skin temperature probe.
o A wireless heart rate kit for human with a transmitter that transmits heart rate wireless to a
receiver with automatic detection and analysis with the software.
o Digital stethoscope should allow listening the heart sounds while simultaneously recording the
representative cardiac traces.
o ISO and other safety certificates must be provided.
o Main unit should carry at least 02 years Manufacturer’s warranty and should have wide
acceptance and recognition in published research papers globally.
25
Dept. of Biochemistry
46. Flame photometer
a. Up to four elements should be measurable with single aspiration.
b. Automatic filter selection (Narrow band interface)
c. Automatic settings of electronic systems
d. Curve fittings for non linear range(up to minimum 05 standards)
e. Calibration should be storable in memory
f. Provision for re-standardization
g. Record should be storable pertaining to date and time analysis
h. Provision for saved set up to minimize operation steps.
i. Measurement results should be recalled later on with display and print out (330 Max).
Element Serum Urine Bio-Fluids
Na 100-200meq//1: 100dil 0-250meq//1: 100dil All the four elements
up to 250meq// with
1: 200dil K 0-10meq//1: 100dil 0-100meq//1: 200dil
Li 0-2meq//1:10dil
Ca 0-10meq//1:2dil
j. Filters (10nm Typical): Na and K (must) Li and Ca (optional)
k. Reproducibility: should be atleast +/-2%f.s.
l. Aspiration Time: should be (5 sec + Avg. time) per element + 4 sec.
m. Air compressor: with built- in air regulator and air filter deliver stable and moisture / oil free
air supply
n. Fuel gas: LPG
o. Power supply: should be 230VAC+/-10%, 50Hz.
26
47. Tissue homogenizer complete set
The tissue – tearor is a rotor /stator type tissue homogenizer which can rapidly homogenize,
disperse and emulsify samples in 0.2 – 1000ml of liquid. During operation the suspended
material is drawn in to the core of the homogenizer by a rotor turning up to 35000rpm. The
material is repeatedly cycled through six narrow slits in the stator where it is rapidly sheared
and disintegrated by high frequency mechanical action. Complete homogenization of tissues
(muscle, liver, breast tissue etc.) is usually achieved in 10-30seconds. Little if any heat is
produced during the process; the tissue - tearer shall come in complete - that is both motor and
probe (aka, generator dispersing tool) are included in one price only. Features….. Used for
mixing, emulsification, shredding or chopping. Practical answer for small samples. Easy to hold
andlight weight for one hand operation. Can also be stand mounted. Autoclavable stainless steel
probes. Insert to aggressive solutions, Inert to aggressive solutions, all probes are
interchangeable probes.and are easily removed forclean up; high speed motor. Speed control
from 5000 to 35000rpm.
48. UV lamp with fittings
UV Lamps to meet the requirements of our clients. These lamps are effective in eliminating
oxides, micro organisms and other contaminants in water. The lamps are manufactured in
advanced production units using quality components. Features: high turbulence; non wetting
surface; high reliability low maintenance.
49. Paper electrophoresis apparatus
Vertical model with small 3 strips vertical large 06 strips mini power pack for the above 02
models . Electrophoresis apparatus paper strip model: electrophoresis apparatus shall consist of
a transparent Perspex sheet cabinet 40X23.75X11. 25cm to accommodate 4 strips of 1.5” X 12”
with glass cover provided with safety inter look switch. The cabinet is fitted with leveling
screws. The apparatus shall be supplied with power supply for supply from 0- 400v and 0.100
milli ampere in 1 milli ampere division resp. this unit consists of a millimeter and voltmeter,
polarity reversing switch and connection cable to work on 220v, 50cycles ac mains.
50. Refrigerator
350 litres with freezer compartment
Top Related