AUTOCAD 2
Line (garis)
Membuat garis dengan sistem koordinat
Dengan koordinat cartesius
Misal : membuat garis dari titik A (40, 20) ketitik B (80,80)
Jawab
comand: line
Specify first point: 40.20
Specify next point or [Undo]: 80,80
Misal : membuat sebuah bangun segi 4 dengan panjang 70 dan lebar 50 yang berawal dari titil (30,30)
Jawab
Comand: line
Specify first point: 30,30
Specify next point or [Undo]: 70
Specify next point or [Undo]: 50
Specify next point or [Undo]: 70
Specify end pointer: 50
Dengan koordinat polar
Misal : membuat garis dari titik A (40,20) ke arah atas sejauh 40
Jawab
comand: line
Specify first point: 40,20
Specify next point or [Undo]: @40<90
Misal : membuat sebuah bangun segi 4 dengan panjang 70 dan lebar 50 yang berawal dari titik 30,30
Jawab
Comand: line
Specify first point: 30,30
Specify next point or [Undo]: @70<0 enter
Specify next point or [Undo]: @50<90 enter
Specify next point or [Undo]: @70<180 enter
Specify end pointer: @50<270 enter
Rectangle (segi empat)
Membuat segi empat
Step : Comand : klik atau pilih Rectangle atau rectang -> atau menu kemudia pilih draw klik rectangle maka akan muncul toolbar draw
Misal : dengan menggunakan mouse tentukan titik sudut 1 dan 2
Jawab
Command: rectang
Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]: 30,20
Specify other corner point or [Dimensions]: 160,80
Misal : membuat segi empat dengan sudut 1 di koordinat (50,50) dan sudut ke 2 di (150,150)
Jawab
Command: rectang
Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]: 50,50
Specify other corner point or [Dimensions]: 150,150
Step : dengan menggunakan command -> tentukan dimensi panjang dan lebar (contoh dengan autocad 2004)
Contoh
Command: rectang
Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:20,20
Specify other corner point or [Dimensions]: -
Specify length for rectangles <0.0000>: 30
Specify width for rectangles <0.0000>: 20
Specify other corner point or [Dimensions]: tentukan arah sudut ke 2 (ATAS, BAWAH, KANAN. KIRI)
Segi Empat Sudut Terpancung (Chamfer)
Contoh : (dengan kepancungan 10 dan 5)
Jawab
Command: rectang
Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]: C
Specify first chamfer distance for rectangles <3.0000>: 10
Specify second chamfer distance for rectangles <4.0000>: 5
Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]: 20,20
Specify other corner point or [Dimensions]: 50,50
Segi Empat Sudut Tumpul (Fillet)
Contoh : (dengan ketumpulan 10)
Jawab
Command: rectang
Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]: F
Specify fillet radius for rectangles <0.000>: 10
Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]: 10,10
Specify other corner point or [Dimensions]: 80,80
Segi Empat Bergaris Tebal (Width)
Contoh : (dengan ketebalan 10)
Jawab
Command: rectang
Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]: w
Specify line width for rectangles <0.0000>: 10
Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]: 10,10
Specify other corner point or [Dimensions]: 80,80
Setelah melakukan langkah-langkah tersebut settingan harus dikembalikan ke nilai awal agar tidak membingungkan kecuali jika akan melakukan kombinasi
Segi Empat dengan kombinasi
kombinasi filet dengan width Kombinasi Charm dengan width
Circle (lingkaran)
Step : klik command -> circle atau c (atau dapat dengan cara klik menu -> draw -> circle -> (piih acuannya -> toolbar draw)
Misal : membuat lingkaran dengan menggunakan center dan radius
Contoh : membuat lingkaran yang ber-centre di 40,50 dengan radius 30
Jawab
Command: C CIRCLE
Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: 40,50
Specify radius of circle or [Diameter]: 30
Misal : membuat lingkaran dengan center dan diameter
Contoh : membuat lingkaran yang ber-pusat di 40,50 dengan radius 60
Jawab
Command: C CIRCLE
Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: 40,50
Specify radius of circle or [Diameter] <30.0000>: D
Specify diameter of circle <60.0000>: 60
Misal : membuat lingkaran dengan two point circle (2p)
Contoh : membuat buat lingkaran yang melalui titik 40,20 dan titik 40,80
Jawab
Command: C -> CIRCLE
Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: 2P
Specify first end point of circle's diameter: 40,20
Specify second end point of circle's diameter: 40,80
Misal : membuat lingkaran dengan menggunakan three point circle (3p)
Contoh : membuat lingkaran yang melalui titik (40,20) ; (10,50) dan titik (40,80)
Jawab
Command: CIRCLE CIRCLE
Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: 3P
Specify first point on circle: 40,20
Specify second point on circle: 10,50
Specify third point on circle: 40,80
Misal : membuat lingkaran dengan menggunakan tengent, tangent, radius (menggambarkan suatu lingkaran yang menyinggung ke suatu obyek yang dipilih, dimana titik singgung tersebut akan mendekati titik tangen yang dipilih)
Contoh : membuat lingkaran dengan radius 30 yang akan menyinggung lingkaran 1 dan lingkaran 2 di titik A dan B
Jawab
Command: C -> CIRCLE
Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: ttr
Specify point on object for first tangent of circle: klik di A
Specify point on object for second tangent of circle: klik di B
Specify radius of circle <20.0000>: 30
LATIHAN
Setting lembar kerja sbb:
Unit dalam centimeter; limit =(0,0) dan (1000,1000)
Grid & snap = 50; tulis nama di kanan atas
Segi empat
Buat segi empat sudut tumpul dengan radius sudut tumpulnya sebesar 150 dengan tebal garisnya 50 dan segi empat ini dibuat dengan dari titik ke 1 (100,100) dan titik sudut ke 2 di (800,700)
*JAWABAN*
Command: rectangSpecify first corner point or [chamfer/elevation/fillet/thickness/width] 100,100Specify other corner point or [dimensions]: 800,70
Command : rectangSpecify first corner point or [chamfer/elevation/fillet/thickness/width]: FSpecify first radius for rectangles <0.000>: 150Specify first corner point or [chamfer/elevation/fillet/thickness/width]: 150,150Specify other corner point or [dimensions]: 100,100
Command : rectangSpecify first corner point or [chamfer/elevation/fillet/thickness/width]: WSpecify line width for rectangles <0.000>: 50Specify first corner point or [chamfer/elevation/fillet/thickness/width]: 50,50Specify other corner point or [dimensions]: 100,100
Lingkaran
Buat lingkaran yang melalui titik (500,0); (100,400) dan (900,400)
*JAWABAN*
Command: CircleCircle specify center point for circle or [3P/2P/Ttr (tan tan radius)]: 3PSpecify first point on circle: 500,0Specify second point circle: 100,400Specify third point on circle: 900,400
Simpan file Nim_Nama.dwg
Jawab:
Menu, klik save as, unbah nama dengan format NIM_Nama.dwg
Polygon (segi banyak)
Dengan metode edge = menentukan ukuran panjang salah satu garis sisi
Step :
Command: POLYGON Enter number of sides <4>: 5
Specify center of polygon or [Edge]: E
Specify first endpoint of edge: KLIK Di 1
Specify second endpoint of edge: KLIK Di 2
Dengan metode inscribed = menentukan titik pusat dan jari-jari pusat polygon ke salah satu sudut polygon
Step :
Command: POLYGON
Enter number of sides <5>: 6
Specify center of polygon or [Edge]: KLIK Di 1
Enter an option [Inscribed in circle/Circumscribed about circle] <I>: I
Specify radius of circle: KLIK Di 2
Dengan metode circumscribet = menentukan titik pusat dan jari-jari dari pusat pplygon ke titik tengah salah satu sisi polygon
Step :
Command: POLYGON
Enter number of sides <6>: 7
Specify center of polygon or [Edge]: KLIK Di 1
Enter an option [Inscribed in circle/Circumscribed about circle] <I>: C
Specify radius of circle: KLIK Di 2
Doughnut (donut)
Untuk menggambarkan bentuk cincin yang berdiiameter dalam dan luarya berbeda
Contoh : lingkaran dengan titik tengah (5,5), diameter dalam 5, diameter luar 8
Jawab
Command: DONUT
Specify inside diameter of donut <5.0000>: 6
Specify outside diameter of donut <6.0000>: 8
Specify center of donut or <exit>: 5,5
Arc (busur)
Koordinat 3 titik
Misal : busur dengan titik awal (2,2), titik kedua (5,5) dan terakhir (8,2)
Maka :
Command: ARC
Specify start point of arc or [Center]: 2,2
Specify second point of arc or [Center/End]: 5,5
Specify end point of arc: 8,2
Titk awal, titik pusat, titik akhir
Misal : busur dengan titik awal (2,2), titi tengah (2,4) dan titik akhir (0,4)
Maka :
Command: ARC
Specify start point of arc or [Center]: 2,2
Specify second point of arc or [Center/End]: C
Specify center point of arc: 2,4
Specify end point of arc or [Angle/chord Length]: 0,4
Titik awal, titik pusat, ukuran sudut
Misal : busur dengan titik awal (4,2), titik pusat (5,5) dan ukuran sudut 225
Maka :
Command: ARC
Specify start point of arc or [Center]: 4,2
Specify second point of arc or [Center/End]: C
Specify center point of arc: 5,5
Specify end point of arc or [Angle/chord Length]: A
Specify included angle: 225
Titik awal, titik pusat, panjang tali busur
Misal : busur dengan titik awal (4,2), titik pusat (5,5) dan panjang tali busur 5
Maka :
Command: ARC
Specify start point of arc or [Center]: 4,2
Specify second point of arc or [Center/End]: C
Specify center point of arc: 5,5
Specify end point of arc or [Angle/chord Length]: L
Specify length of chord: 5
Titik awal, titik akhir, ukuran sudut
Misal : busur dengan titik awal (5,5), titik akhir (10,2) dan ukuran sudut 90
Maka
Command: ARC
Specify start point of arc or [Center]: 5,5
Specify second point of arc or [Center/End]: E
Specify end point of arc: 10,2
Specify center point of arc or [Angle/Direction/Radius]: A
Specify included angle: 90
Titik awal, titik akhir, arah busur
Misal : busur dengan titik awal (4,3), titik akhir (1,8) dan arah busur 45
Maka :
Command: ARC
Specify start point of arc or [Center]: 4,3
Specify second point of arc or [Center/End]: E
Specify end point of arc: 1,8
Specify center point of arc or [Angle/Direction/Radius]: D
Specify tangent direction for the start point of arc: 45
Titik awal, titik akhir, ukuran jari-jari
Misal : busur dengan titik awal (4,3), titik akhir (1,8) dan jari-jari 3
Maka:
Command: ARC
Specify start point of arc or [Center]: 4,3
Specify second point of arc or [Center/End]: E
Specify end point of arc: 1,8
Specify center point of arc or [Angle/Direction/Radius]: R
Specify radius of arc: 3
Titik pusat, titik awal, titik akhir
Misal : busur dengan titik pusat (5,5), titik awal (3,2) dan titik akhir (2,7)
Maka :
Command: ARC
Specify start point of arc or [Center]: C
Specify center point of arc: 5,5
Specify start point of arc: 3,2
Specify end point of arc or [Angle/chord Length]: 2,7
Titik pusat, titik awal, ukuran sudut
Misal : busut dengan titik pusat (5,5), titik awal (5,2) dan ukuran sudut 135
Maka :
Command : ARC
Specify start point of arc or [Center]: C
Specify center point of arc: 5,5 -> Specify start point of arc: 5,2
Specify end point of arc or [Angle/chord Length]: A
Specify included angle: 135
Titik pusat, titik awal, panjang tali busur
Misal : busur dengan titik pusat (5,5), titik awal (5,2) dan panjang tali busur 5
Maka :
Command: ARC
Specify start point of arc or [Center]: C
Specify center point of arc: 5,5
Specify start point of arc: 5,2
Specify end point of arc or [Angle/chord Length]: L
Specify length of chord: 5
Melanjutkan dari busur/line yang sebelumnya dibuat
Step :
Command: ARC
Specify start point of arc or [Center]: <tekan enter>
Specify end point of arc: KLIK di A
RESUME VIDEO
Video ke-1
Step :
Command : rectang
Specify other corner point or [Area/Dimensions/Rotation] : d
Specify length of rectangles <10.0000> : 70
Specify width of rectangles <10.0000> : 50
Command : move
Command : fillet
Select first object or [Undo/Polyline/Radius/Trim/Multiple] : r
Specify fillet radius <0.0000> : 10
Select first object or [Undo/Polyline/Radius/Trim/Multiple] : p
Command : line
Specify first point : mid
Specify next point or [Undo] : @60,0
Command : circle
Specify radius of circle [Diameter] <25.0000> : d
Specify diameter of circle <50.0000> : 30
Command : rectang
Specify length of rectangles <70.0000> : 35
Specify width of rectangles <50.0000> : 15
Command : fillet
Select first object or [Undo/Polyline/Radius/Trim/Multiple] : r
Specify fillet radius <10.0000> : 7.5
Select first object or [Undo/Polyline/Radius/Trim/Multiple] : p
Command : rectang
Specify length of rectangles <35.0000> : 35
Specify width of rectangles <15.0000> : 15
Command : trim
Select the object
Video ke-2
Step :
Buka aplikasi autocad
Lihat contoh gambar yang ingin anda buat
Buat sebuah rectangle command : rectangle specify first corner point or
[chamfer/elevation/fillet/thickness/witdh]specify order point or
[area/dimensions/rotation]:d specify length for rectangle <10.0000>:5 specify width for
rectangles <10.0000>:105specify other corner point or [area/dimensions/rotation]:
Pindahkan benda command : move select object(klik object yang anda ingin
pindahkan):1foundpindahkan ketempat yang ingin anda letakan gambar tersebut
Buat garis pada pertengahan rectanglecommand : line specify first point : specify next
point [undo]:90,-85
Buat lingkaran pada garis yang baru saja dibuat command:circle specify center point for
circle or [3p/2p/Ttr(tan tan radius) :specify radius of circle or [diameter]:10
Buat lagi lingkaran lebih besar dari lingkaran sebelumnyacommand : circlespecify center
point for circle or [3p/2p/Ttr(tan tan radius) : specify radius of circle or
[diameter]<10.0000>:20
Buat garis diantara rectangle dan kedua lingkaran command : line specify first
point(tarik garis hingga menyentuh rectangle)specify next point
or[undo]command:command**STRETCH** specify stretch point or [base
point/copy/undo/exit]:
Hapus garis yang pertama kali dibuat (pada langkah ke 5)
Pindahkan terlebih dahulu bulatan yang dibuat sehingga berada di garis bawah
rectangle)Command:trimselect object yang ingin anda trim(klik rectangle , garis antara
rectangle,dan kedua lingkaran) trim bagian yang anda ingin hilangkan
Hapus sisa garis yang masih berada dalam lingkaran kecil
Ubah tampilan menjadi 3D view SE Isometric
Command: view enter an option[?delete/ortographic/restore/save/setting/window]:seiso
regenerating model
Comman: peditselect polyline or[multiple]enter an option[close/join/width/edit
vertex/fit spline/decurve/Ltype gen/undo]: jselect object(klik objek yang anda ingin
satukan
Command : extrude current wire frame denaity : isoline=4 select objects to extrude(klik
gambar yang ingin anda extrude) specify height of extrusion or [direction/path/taper
able]<34.9040>:20
Ubah tampilan 3D viewsright
Buat rectanglecommand : rectangspecify first corner point
or[chamfer/elevation/fillet/thickness/width]:specify other corner point or
[area/dimensions/rotation]:dspecify length for rectangles<50.0000> : 45specify width
for rectangles <105.0000>:20
Pindahan rectangle yang baru saja anda buat sesuai contoh
Command : line specify first pointspecify point or[undo]:@-25,0specify next point
or[undo]:
Satukan garis yang baru saja anda buat command : p edit select polyline or[multiple]
(klik object yang anda ingin satukan)object selected is not polyline do you want to turn it
into one?<Y> enter an option[close/joim/width/editvertex/fit/spline/decurve/type
gen/undo]:j
Ubah kembali tampilan menjadi 3d viewsse isometric
Pindahkan gambar yang sebelumnya anda buat dengan gambar syang baru saja anda buat
menjadi satu seperti pada contoh gambar
Command extrude pilih gambar yang anda ingin extrudespecify height of extrusion
or[direction/path/taper anle]<20.0000>:50
Command subtract select solids and region to subtract from..(klik gambar yang anda ingin
beri perintah subtract)
Command :subtractselect solids and regions to subtract from..(klik bagian mana yang
anda ingin subtract sesuai pada contoh)
Command : ucscurrent ucs name : *RIGHT*specify origin of ucs
or[face/named/object/previious/view/world/x/y/z/zaxis]<world>:w
Command : box specify first corner or[center:specify other corner
or[cube/length]:@30,45,20
Pindahkan box yang baru saja anda buat ketempat seperti yang ada pada gambar contoh
Commad : subtract(klik gambar yang anda ingin subtract”klik gambar bagian atas yang
sudah disatukan dengan box yang baru disatukan”
Ubah tampilan menjadi 3D views->front
Command :rectangspecify first corner point
or[chamfer/elevation/fillet/thickness/width]:specify other point
or[area/dimensions/rotation]:dspecify length for rectangles <45.0000>:5specify width
for rectangles <20.0000>: 60
Pindahkan gambar yang ada buat menggunakan command : move ketempat yang anada
inginkan seperti contoh(gabungkan dengan bagian atas)
Buat lingkaran pada garis atas rectangle yang baru saja anda buatcommand:
circlespecify center point for circle or [3p/2p/Ttr(tan tan radius)]: specify radius of circle
or [diameter]<20.0000>:15
Buat kembali lingkaran yang lebih besar command: circlespecify center point for circle
or [3p/2p/Ttr(tan tan radius)]: specify radius of circle or [diameter]<15.0000>:25
Command : trim selecet object yang ingin anda trim (klik rectangle yang baru dibuat dan
kedua lingkaran yang juga baru dibuat)trim bagian yang ingin anda hilangkan
Command : line buat line sesuai rectangle yang sudahanda trim sebelumnya
Command : peditselect polyline or[multiple](klik line yang baru saja anda buat) object
selected is not a polyline do you eant to turn it into one?<Y>enter an option
[close/joim/width/edit vertex/fit/spline/decurve/Ltype gen/undo]: j klik gambar yang
ingin anda buat menjadi polyline
Ubah tampilan menjadi 3Dse isometric
Pindahkan gambar yang baru anda buat menggunakan command : move ke belakang
gambar bagian atas komponen
Command extrudecurrent wire frame density:isoline=4select object(klik gambar yang
abru saja anda pindahkan atau anda buat)specify height of extrusion
or[direction/path/taper angle]<20.0000>:40
Command : union select objects(klik semua gambar)
Command :ucscurrent ucs name :*FRONT*specify origin of ucs or
[face/named/object/previous/view/world/x/y/z/zaxis]:<world>:w
Command : render (ini dilakukan untuk melihat hasil akhir)
Video ke-3
Step :
Buka aplikasi auto cad
Lihat contoh gambar yang anda ingin buat dalam lembar kerja autocad anda
Buat garis pertama command : line specify next point or [undo]:@60,0specify next
point or [undo]:@0.10 specify next point or [close/undo]:@-5,0 specify next point or
[close/undo]:@0,20 specify next point or [close/undo]:@-50,0 specify next point or
[close/undo]:@0,-20 specify next point or [close/undo]:@-5,0tarik garis akhir menuju
end point
Command :peditselect polyline or [multiple]klik objesct yang ingin anada
gunakan)object selectedis not a polyline do you want to turn it into one?<Y> y enter an
option [close/join/width/edit vertex/fit/spline/decurve/Ltype gen/undo]:jselect
object(klik semua line yang baru saja anda buat)7seqments addes to polyline enter an
option [close/join/width/edit vertex/fit/spline/decurve/Ltype gen/undo]:
Ubah tampilan menjadi 3D views se isometric
Command :rotate 3Dcurrent positive angle :ANGDIR=counterclockwise
ANGBASE=0specify first point on axis or define axis
by[obeject/last/view/yaxis/zaxis/2point]:xspecify a point on the X axis<0,0,0> :
specify rotation or [reference]:90
Command :extrude current wire frame density :isoline=4 select object to extrude(klik
gabar yang ingin anda extrude)select object to extrude : 1 foundspecify height of
extrusion or[directyion/ath/taper angle]:95
Command :ucs current uscs name :*WORLD*specify origin of ucs or
[face/named/object/view/world/x/y/z/zaxis]<world>:specify point on X-axis or <accept>:
Ubah tampilan menjadi 3D view right\
Buat line sommand : line specify next point or [undo]: @-77,0
Command :pedit select polyline or [multiple]: (klik line yang baru saja anda buat)object
selected is not a polyline do you want to turn it into one?<Y> enter an option
[close/join/width/edit vertex/fit/spline/decurve/Ltype gen/undo]:jselect objects : 1 found
(klik line yang baru anda buat) 1 was not pararel to the ucs
Ubah tampilan menjadi 3Dse isometric
Command : line(buat garis sesuai dengan contoh gambar)
Command: erase (hapus bagian yang anda ingin hapus)
Command : pedit select polyline or [multiple]: (klik gambar yang ingin anda gunakan)
enter an option [close/join/width/edit vertex/fit/spline/decurve/Ltype gen/undo]:j
Command :extrude current wire frame density : isoline=4select objects to extrude : (klik
gambar yang aada ingin gunakan)specify height of extrusion or[direction/path/taper
angle]<95.0000>:
Command : subtract select solids and regions to subtract from… select object(selct
object yang anda ingin gunakan\
Command :ucscurrent ucs name :*RIGHT*specify origin of ucs or
[face/named/object/previous/view/world/x/y/z/zaxis]:<world>:w
Command : boxspecify first corner or [center]: specify other corner or
[cube/length]:@15,25,30
Pindahkan box yang baru saja dibuat menggunakan command : move ke bagian yang anda
inginkan
Command : subtract select objects(pilihlah object yang anda ingin gunakan)
Video ke-4
Step :
Command : move pindahkan benda
Ubah tampilan menjadi 3Dback
Command : rectang specify first corner point or
[chamfer/elevation/fillet/thickness/witdth]: specify other corner point or
[area/dimensions/rotation0:dspecify length for rectangles <10.0000>:50 specify width
for rectangles <10.0000>:50
Command : move(pindahkan gambar yang rectangle yang baru ke bagian atas gambar yang
sudah ada)
Buat line didalam rectangle yang telah dibuatCommand : line specify first point :
specify next point or [undo]: @0,25specify next point or [undo]:
Buat lingkaran penuh didalam rectangle yang tadi dibuat command : circlespecify
center point for circle or (3p/2p/Ttr{tan tan radius}) specify radius of circle or [diameter]
Buat lagi lingkaran lebih kecil dari yang sebelumnya dibuat command : circlespecify
center point for circle or (3p/2p/Ttr{tan tan radius}) specify radius of circle or [diameter]
<25.0000>:dspecify diameter of circle <25.0000>:15
Buat line membentuk jari jari dari lingkaran tengah ke rectangle yang sebelumnya dibuat
command : line command : **STRETCH** specify stretch point or [base
point/copy/undo/exit](tarik garik kembali sehingga menjadi diameter untuk setiap lingkaran
yang dibuat)
Command : trim select object or <select all>(klik object yang ingin anda gunakan) select
objects : 1 found,4 totaltrim gambar yang anada ingin hilangkan
Command : erase (hapus bagian yang tidak sesuai dengan gambar contoh)
Command : line (buat line seperti contoh yang sudah ada)
Ubah tapilan menjadi 3D se isometric
Pindahkan gambar yang baru saja anda buat menggunakan command : move ketempat
sesuai contoh (bagian atas gambar dibelakang)
Rapihkan gambar sebagaimana contoh gambar yang anda ingin buat
(karena line yang baru saja dibuat tidak dapat dipindakan,buat kembali line menggunakan
command : line lalu buat ulang seperti sebelumnya)
Command : pedit select polyline or [multiple](select object yang ingin digunakan)select
objects : 1 found,2 total1 segment added to polyline enter an option
[close/join/width/edit vertex/fit/spline/decurve/Ltype gen/undo]:
Command :pedit select polyline or [multiple]: (klik gambar yang ingin digunakan)object
selected is not a polyline do you want to turn it into one?<Y> enter an option
[close/join/width/edit vertex/fit/spline/decurve/Ltype gen/undo]:jselect objects(klik
semua gambar yang anda ingin gunakan) select object : 1 found,4 total select objects :
3 segment added to polyline enter an option [close/join/width/edit
vertex/fit/spline/decurve/Ltype gen/undo]:
Command : extrude select objects to extrude (klik object yang anda ingin extrude) :
1found,2 total specify height of extrusion or [direction/path/taper angle]<30.0000>:-32
Buat lingkaran ditengah bagian atas sesuai dengan contoh command : circle specify
center point for circle or [3p/2p/Ttr(tan tan radius)] specify radius of circle or
[diameter]<15.0000> :
Command : extrudeselect object to extrude (klik lingkaran yang baru dibuat) : 1 found ->
specify height of extrusion or [direction/path/taper angle]<30.0000> : -30
Command : union select objects (klik semua gambar) : 1 found,2total
Command :ucs current uscs name :*WORLD*specify origin of ucs or
[face/named/object/view/world/x/y/z/zaxis]<world>:w
Command : zoom specify corner of window,enter a scale factor (nX or nXP),or
[all/center/dynamic/extent/previous/scale/window/object]<real time> : a
Command : render
Video ke-5
Step :
View -> 3D views -> SE isometric
Command : box
Specify first corner or (center) :
Specify other corner or center : @30, 90, 50
Command : regen
Repeat regen
Draw -> modeling -> box
Command : box
Specify first corner or (center) : @15, 60, 30
Command : move
Select object : 1 found
Select object :
Specify base point or (displacement) <displacement> :
Specify second point or <use first point of displacement> :
Command : subtract
Select solid and regions to subtract from...
Select object : 1 found
Select object :
Select object :
Select object :
Command : _rectange
Specify first corner point or (chamfer/elevation/fillet/thickness/width) :
Specify other point or (area/dimensions/rotation) : d
Specify length for rectangles <10.0000> : 20
Specify width for rectangles <10.0000> : 45
Specify other corner point or (area/dimensions/rotation) :
Command : fillet
Curret settings : mode = trim, radius = 0.0000
Select first object or (undo/polyline/radius/trim/multiple) : r
Specify fillet radius <0.0000> : 10
Select first object or (undo/polyline/radius/trim/multiple) : p
Select 2D polyline : 4 lines were filleted
Command : _rectang
Specify first corner point or (chamfer/elevation/fillet/thickness/width) :
Specify other point or (area/dimensions/rotation) : d
Specify length for rectangles <20.0000> :10
Specify width for rectangles <45.0000> : 35
Specify other corner point or (area/dimensions/rotation) :
Command : fillet
Curret settings : mode = trim, radius = 10.0000
Select first object or (undo/polyline/radius/trim/multiple) : r
Specify fillet radius <10.0000> : 5
Select first object or (undo/polyline/radius/trim/multiple) : p
Select 2D polyline : 4 lines were filleted
Command : fillet
Curret settings : mode = trim, radius = 5.0000
Command : move
Select object : 1 found
Select object :
Specify base point or (displacement) <displacement> : cen
Specify second point or <use first point of displacement> :
Command : line
Specify first point :
Specify next point or (undo) : @0, 20
Specify next point or (undo) :
Command : specify opposite corner :
Command : rotate 3D
Current positive angle : ANGRID = counterlockwise ANGBASE = 0
Specify first point on axis or define axis by (object/last/view/Xaxis/Yaxis/Zaxis/2 points) : y
Specify a point on the Y axis <0,0,0> :
Specify rotation angle or (reference) : 90
Command : specify opposite corner :
Command : move 2 found
Specify base point or (displacement) <displacement> :
Specify second point or <use first point of displacement> :
Command : extrude
Current wire frame density : ISOLINES = 42 found
Specify height of extrusion or (direction/path/taper angles) <30.0000> :
Command : <polar on>
Command : <polar off>
Command : undo
Current settings : auto = on, control = all, combine = yes
Enter the number of operations to undo or (auto/control/begin/end/mark/back) <1> :
Command : extrude
Current wire frame density : ISOLINES = 42 found
Select objects to extrude : 1 found
Select objects to extrude : 1 found, 2 total
Select objects to extrude :
Specify height of extrusion or (direction/path/taper angles) <30.0000> : 30
Command : union
Select objects : 1 found
Select objects : 1 found, 2 total
Select object :
Command : subtract
Select solid and regions to subtract from...
Select object : 1 found
Select object :
Select solid and regions to subtract from...
Select object : 1 found
Select object :
Select object :
Draw -> modeling -> cylinder
Command : _cylinder
Specify center point of base or (3D/3P/ttr/elliptical) :
Specify base radius or (diameter) : d
Specify height or (2 point/axs end point) <-30.0000> : 15
Command : _cone
Specify center point of base or (3D/3P/ttr/elliptical) :
Specify base radius or (diameter) <5.0000> :
Specify height or (2 point/axs end point/top radius) <15.0000> :
Command : specify opposite corner :
Command : union
Select object : 1 found
Select object : 1 found, 2 total
Select object :
Command : rotate 3D
Current positive angle : ANGRID = counterlockwise ANGBASE = 0
Select object : 1 found
Select object :
Specify first point on axis or define axis by (object/last/view/Xaxis/Yaxis/Zaxis/2 points) : x
Specify a point on the X axis <0,0,0> :
Specify rotation angle or (reference) : 90
Commmad : _line
Specify first point :
Specify next point or (undo) :
Specify next point or (undo) :
Command : move
Select object : 1 found
Select object :
Specify base point or (displacement) <displacement> :
Specify second point or <use first point of displacement> :
Command : _eraser 1 found
Command : subtract
Select solid and regions to subtract from...
Select object : 1 found
Select object :
Select solid and regions to subtract from...
Select object : 1 found
Select object :
Command : UCC
Current ucs name : *WORLD*
Specify origin of ucs or (face/named/object/previous/view/world/x/y/z/Zaxis) <world> : w
Command : zoom
Specify corner of window, enter a scale factor (nX or nXP, or all/center/dynamic/extenta/previous/scale /window/object) <real time> : a
Regenerating model
Command : render
Video ke-6
Step :
Command : line
Specify next point or : 110
Specify next point or : 60
Specify next point or : 30
Specify next point or : 70
Specify next point or : 80
Specify next point or : 130
Command : pedit
Command : offset
Specify offset distance or : 5
Command : extrude
Specify height of extrude or : 35
Command : substract
Command : pline
Specify next point or : 30
Specify next point or : 130
Specify next point or : 110
Specify next point or : 130
Specify next point or : 80
Command : extrude
Specify height of extrude or : 2
Command : rectang
Specify other corner point or : 20
Command : extrude
Specify height of extrude or : 57
Command : offset
Specify offset distance or : 1
Command : extrude
Specify height of extrude or : 74
Command : rectang
Specify other corner point or : 20
Command : extrude
Specify height of extrude or : 30
Command : rectang
Specify other corner point or : 1
Command : circle
Specify radius of circle [Diameter] : 0,3
Command : extrude
Specify height of extrude or : 0,3
Command : extrude
Specify height of extrude or : 0,8
Command : line
Specify next point or [Undo] : 30
Command : pline
Specify next point or : 10
Command : extrude
Specify height of extrude or : 52
Command : move
Command : pline
Specify next point or :10
Command : extrude
Specify height of extrude or : 95
Video ke-7
Step :
Command : line
Command : view enter an option (? /delete/orthographic/restore/save/setting/widow) : _seiso
Regenerating model
Command : _zoom_e
Command : ucsicon
Enter an option (on/off/all/noorigin/origin/properties) <on> : N
Command : _line
Specify first point :
Specify next point or (undo) <ortho on> :
Specify next point or (undo) :
Specify next point or (close/undo) :
Specify next point or (close/undo) :
Command : _presspull
Click inside bounded areas to press or pull
1 loop extracted
1 region created
Command : _vscurrent
Enter an option (2dwireframe/3dwireframe/3dhidden/realistic/conceptual/other) <2dwireframe> : _C
Enter a solid editing option (face/edge/body/undo/exit) <exit> : _edge
Enter an edge editing option (copy/color/undo/exit) <exit> : _copy
Select edge or (undo/remove) :
Select edge or (undo/remove) :
Specify a base point or displacement :
Specify a second point of displacement :
Specify a base point or displacement :
Solids editing automatic checking : SOLIDCHECK = 1
Enter a solid editing option (face/edge/body/undo/exit) <exit> : _edge
Enter an edge editing option (copy/color/undo/exit) <exit> : _copy
Select edges or (undo/remove) :
Select edges or (undo/remove) :
Enter an edge editing option (copy/color/undo/exit) <exit> : _copy
Enter an edge editing option (copy/color/undo/exit) <exit> : “cancel”
Command : *cancel*
Command : _circle
Specify center point for circle or (3P/2P/Ttr (tan tan radius) :
Specify radius of circle or (diameter) : 2
Enter an option (2dwireframe/3dwireframe/3dhidden/realistic/conceptual/other) <conceptual> : _2 regeneration model
Command : _eraser
Select object : 1 found
Select object : 1 found, 2 total
Select object :
Enter an option (2dwireframe/3dwireframe/3dhidden/realistic/conceptual/other) <2dwireframe> : _C
Command : _presspull
Click inside bounded areas to press or pull
1 loop extracted
1 region created
Command : _view enter an option (?/delete/orthographic/restore/save/settings/window) : _seiso
Command : _line
Specify first point :
Specify next point or (undo) :
Specify next point or (undo) :
Specify next point or (close/undo) :
Specify next point or (close/undo) :
Command : _presspull
Click inside bounded areas to press or pull
1 loop extracted
1 region created
Command : _move
Select object : 1 found
Select object :
Specify base point or (displacement) <displacement> :
Specify second point or <use first point of displacement> :
Command : _union
Select objects : 1 found
Select objects : 1 found, 2 total
Select objects :
Command : _eraser
Select objects :
Specify opposite corner : 4 found
Select object :
Command : _view enter an option (?/delete/orthographic/restore/save/settings/window) : _top
Command : _view enter an option (?/delete/orthographic/restore/save/settings/window) : _top
Command : _view enter an option (?/delete/orthographic/restore/save/settings/window) : _front
Command : _view enter an option (?/delete/orthographic/restore/save/settings/window) : _back
Command : _view enter an option (?/delete/orthographic/restore/save/settings/window) : _swiso
Command : _view enter an option (?/delete/orthographic/restore/save/settings/window) : _seiso
Command : _view enter an option (?/delete/orthographic/restore/save/settings/window) : _nviso
Command : _3Dforbit press ESC or ENTER to exit, or right-click to display shortcut-menu.
Command : _view enter an option (?/delete/orthographic/restore/save/settings/window) : _seiso
Command : 2dwireframe
Enter an option (2dwireframe/3dwireframe/3dhidden/realistic/conceptual/other) <conceptual> : _2 regenerating model
Command : _3dwureframe
Enter an option (2dwireframe/3dwireframe/3dhidden/realistic/conceptual/other) <2dwireframe> : _3
Command : _realistic visual style
Enter an option (2dwireframe/3dwireframe/3dhidden/realistic/conceptual/other) <3dhidden> : _R
Command : _conceptual visual style
Enter an option (2dwireframe/3dwireframe/3dhidden/realistic/conceptual/other) <realistic> : _C
Command : _layer
Select color : _20 red
Command : specify opposite corner :
Command : *cancel*
Command : _circle
Specify center point for circle or (3P/2P/Ttr (tan tan radius) :
Specify radius of circle or (diameter) <2.000> : 1
Command : _presspull
Click inside bounded areas to press or pull
1 loop extracted
1 region created
Command : _rectange
Specify first corner point or (chamfer/elevation/fillet/thickness/width) :
Specify other corner point or (area/dimensions/rotation) :
Command : _presspull
Click inside bounded areas to press or pull
1 loop extracted
1 region created
SE Isometric