Download - Inventor Credits

Autodesk Inventor 2016

© 2015 Autodesk, Inc. All rights reserved.

All use of this Software is subject to the terms and conditions of the Autodesk license agreement accepted upon installation of this Software and/or packaged with the Software.

This Product or Service may incorporate or use background Autodesk technology components. For information about these components, click here: http://www.autodesk.com/cloud-platform-components

Trademarks

The following are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiariesand/or affiliates in the USA and other countries: 123D, 3ds Max, Alias, ATC, AutoCAD LT, AutoCAD,Autodesk, the Autodesk logo, Autodesk 123D, Autodesk Homestyler, Autodesk Inventor, AutodeskMapGuide, Autodesk Streamline, AutoLISP, AutoSketch, AutoSnap, AutoTrack, Backburner,Backdraft, Beast, BIM 360, Burn, Buzzsaw, CADmep, CAiCE, CAMduct, Civil 3D, Combustion,Communication Specification, Configurator 360, Constructware, Content Explorer, Creative Bridge,Dancing Baby (image), DesignCenter, DesignKids, DesignStudio, Discreet, DWF, DWG, DWG(design/logo), DWG Extreme, DWG TrueConvert, DWG TrueView, DWGX, DXF, Ecotect, Ember,ESTmep, Evolver, FABmep, Face Robot, FBX, Fempro, Fire, Flame, Flare, Flint, ForceEffect, FormIt,Freewheel, Fusion 360, Glue, Green Building Studio, Heidi, Homestyler, HumanIK, i-drop,ImageModeler, Incinerator, Inferno, InfraWorks, InfraWorks 360, Instructables, Instructables(stylized robot design/logo), Inventor, Inventor HSM, Inventor LT, Lustre, Maya, Maya LT, MIMI,Mockup 360, Moldflow Plastics Advisers, Moldflow Plastics Insight, Moldflow, Moondust,MotionBuilder, Movimento, MPA (design/logo), MPA, MPI (design/logo), MPX (design/logo), MPX,Mudbox, Navisworks, ObjectARX, ObjectDBX, Opticore, Pixlr, Pixlr-o-matic, Productstream,Publisher 360, RasterDWG, RealDWG, ReCap, ReCap 360, Remote, Revit LT, Revit, RiverCAD,Robot, Scaleform, Showcase, Showcase 360, SketchBook, Smoke, Socialcam, Softimage, Sparks,SteeringWheels, Stitcher, Stone, StormNET, TinkerBox, ToolClip, Topobase, Toxik, TrustedDWG, T-Splines, ViewCube, Visual LISP, Visual, VRED, Wire, Wiretap, WiretapCentral, XSI.

ACE™, TAO™, CIAO™, and CoSMIC™ are copyrighted by Douglas C. Schmidt and his research group at Washington University, University of California, Irvine, and Vanderbilt University, Copyright(c) 1993-2009, all rights reserved.

ACIS Geometric Modeler is the registered trademark of SPATIAL TECHNOLOGY, INC.

Adobe, Acrobat, Acrobat Reader, Adobe PDF (logo), Flash, OpenType (logo), Reader, and Streamlineare either registered trademarks or trademarks of Adobe Systems, Inc., in the United States and/orother countries.

ArchVision, realpeople, and RPC are either registered trademarks or trademarks of ArchVision, Inc.

GRANITE® is either a registered trademark or trademark of Parametric Technology Corporation, in the United States and/or other countries.

of 37

http://www.autodesk.com/cloud-platform-components

Intel is a registered trademark or trademark of Intel Corporation or its subsidiaries in the United States and other countries.

mental ray is a registered trademark of NVIDIA ARC GmbH, licensed for use by Autodesk, Inc.

Microsoft, ActiveX, Excel, Microsoft Internet Explorer (logo), OpenType, Tahoma, Windows, Windows (logo), Windows NT, and Windows Start (logo) are either registered trademarks or trademarks of Microsoft Corp. in the United States and/or other countries.

Python is a registered trademark of Python Software Foundation.

Rhino is a trademark of Robert McNeel & Associates.

RSA is either a registered trademark or trademark of RSA Security, Inc., in the United States and/or other countries.

Spatial, ACIS, and SAT are either registered trademarks or trademarks of Spatial Corp. in the United States and/or other countries.

Siemens and the Siemens logo are registered trademarks of Siemens AG. D-Cubed, JT, and Parasolid are trademarks or registered trademarks of Siemens Product Lifecycle Management Software Inc. or its subsidiaries in the United States and in other countries.

All other brand names, product names or trademarks belong to their respective holders.

Patents Protected by the following patents: 6,363,503, 7,168,012, 6,826,436, 7,222,295, 6,925,344, 7,086,028, 6,496,195, 6,950,113, 6,285,369, 7,218,326, 6,888,542, 7,159,753, 7,206,661, 7,068,282, 7,076,412, 6,232,982, 6,466,953, 6,993,401, 6,441,837, 6,614,458, 5,287,408, 7,062,341, 7,088,360, 6,810,295, 6,618,851, 6,543,006, 6,684,116, 6,677,943, 6,629,093, 5,774,359, 6,204,849, 6,212,484, 6,144,382, 6,256,596, 6,636,217, 6,445,388, 6,486,878, 6,654,654, 6,906,711, 6,907,573, 7,068,271, 6,876,363, 7,031,790, 6,867,771, 7,287,191, 6,385,563, 6,063,126, 7,318,011, 7,366,581, 7,330,771, 6,096,088, 6,628,285, 7,047,180, 7,062,532, 6,888,542, 6,363,503, 7,363,615, 7,325,166, 7,168,012, 7,287,191, 5,287,408, US7,653,518, US7,782,319, US7,770,135, US7,643,968, D623657, 8,005,650, 8,035,638, 7,254,235, 7,274,364, 8462176, 8,363,052, 8525848, 8,571,840, 8,355,020, 8,521,478, 8,484,556, 8,411,107, 8,665,272, 8,803,881, 8,686,991, 8,749,544, 8,718,811, 8,723,861, 8,694,286, 8,667,404, 8,601,398, and patents pending.

Third-Party Software Credits and Attributions

This software is based in part on the works of the following:

Portions relating to Intel® Math Kernel Library v.10.1 are Copyright (c) 2000-2008, Intel Corporation. All rights reserved. The Intel® MKL homepage is www.intel.com/software/products/mkl.

Portions relating to JPEG software is copyright © 1991-1998, Thomas G. Lane. All Rights Reserved. This software is based in part on the work of the Independent JPEG Group.

of 37

http://www.intel.com/software/products/mkl

Portions relating to TIFF © Copyright 1988-1997 Sam Leffler. © Copyright 1991-1997 Silicon Graphics, Inc. All rights reserved. Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted without fee, provided that (i) the above copyright notices and this permission notice appear in all copies of the software and related documentation, and (ii) the names of Sam Leffler and Silicon Graphics may not be used in any advertising or publicity relating to the software without the specific, prior written permission of Sam Leffler and Silicon Graphics.THE SOFTWARE IS PROVIDED “AS-IS” AND WITHOUT WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

CMake - Cross Platform Makefile GeneratorCopyright 2000-2009 Kitware, Inc., Insight Software ConsortiumAll rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:* Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.* Neither the names of Kitware, Inc., the Insight Software Consortium, nor the names of their contributors may beused to endorse or promote products derived from this software without specific prior written permission.THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Portions relating to libxml and libxml2 are Copyright (c) 1998-2003 Daniel Veillard. All Rights Reserved. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permitpersons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR

of 37

COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTIONWITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

This software uses the FreeImage open source image library, “as is” and unmodified. See http://freeimage.sourceforge.net for details. FreeImage is used and available under the FreeImage Public License-version 1.0

Portions of this software are copyright © 2006 The FreeType Project (www.freetype.org). All rights reserved.

Portions relating to Json are Copyright (c) 2002 JSON.org

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permitpersons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

The Software shall be used for Good, not Evil.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTIONWITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Portions related to LuaPlus v5.1.4 are Copyright 2002-2010 Joshua C. Jensen. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permitpersons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTIONWITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Portions related to OpenSSL are Copyright (c) 1998-2011 The OpenSSL Project. All rights reserved.

of 37

http://freeimage.sourceforge.net/

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.3. All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)"4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact [email protected]. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written permission of the OpenSSL Project.6. Redistributions of any form whatsoever must retain the following acknowledgment:* "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)"THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.=========================================================This product includes cryptographic software written by Eric Young([email protected]). This product includes software written by Tim Hudson ([email protected]).Original SSLeay License-----------------------Copyright (C) 1995-1998 Eric Young ([email protected]) All rights reserved.This package is an SSL implementation written by Eric Young ([email protected]).

The implementation was written so as to conform with Netscapes SSL.This library is free for commercial and non-commercial use as long as the following conditions are aheared [sic] to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson ([email protected]). Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package.Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

of 37

mailto:[email protected]

http://www.openssl.org/

3. All advertising materials mentioning features or use of this software must display the following acknowledgement: "This product includes cryptographic software written by Eric Young ([email protected])" The word 'cryptographic' can be left out if the rouines [sic] from the library being used are not cryptographic related :-).4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: "This product includes software written by Tim Hudson ([email protected])"THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.]

This Autodesk software contains Qt Cryptographic Architecture v.2.0.2 (QCA). QCA is licensed under the GNU Lesser General Public License v.2.1, which can be found at http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt. A text copy of this license is included on the media provided by Autodesk or with the download of this Autodesk software. You may obtain a copy of the source code for QCA v 2.0.2 from www.autodesk.com/lgplsource or by sending a written request to:Autodesk, Inc.Attention: General CounselLegal Department111 McInnis ParkwaySan Rafael, CA 94903Your written request must:1. Contain a self-addressed CD/DVD mailer (or envelope sufficiently large to hold a DVD) with postage sufficient to cover the amount of the current U.S. Post Office First Class postage rate for CD/DVD mailers (or the envelope you have chosen) weighing 5 ounces from San Rafael, California USA to your indicated address; and2. Identify: a. This Autodesk software name and release number;b. That you are requesting the source code for QCA v 2.0.2; andc. The above URL (www.autodesk.com/lgplsource)so that Autodesk may properly respond to your request. The offer to receive this QCA v 2.0.2 source code via the above URL (www.autodesk.com/lgplsource) or by written request to Autodesk is valid for a period of three (3) years from the date you purchased your license to this Autodesk software. You may modify, debug and relink QCA to this Autodesk software as provided under the terms of the GNU Lesser General Public License v.2.1.

Portions related to Qt v.4.8.5 are Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies). All rights reserved. ThisAutodesk software contains Qt v. 4.8.5, as modified by Autodesk. Qt is licensed under the GNU Lesser General Public License v.2.1, which can be found at http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt. A text copy of this license is included on the media provided by Autodesk or with the download of this Autodesk software. You

of 37

http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt

may obtain a copy of the source code for Qt v. 4.8.5, as modified by Autodesk, from www.autodesk.com/lgplsource or by sending a written request to:

Autodesk, Inc.Attention: General CounselLegal Department111 McInnis ParkwaySan Rafael, CA 94903

Your written request must:1. Contain a self-addressed CD/DVD mailer (or envelope sufficiently large to hold a DVD)

with postage sufficient to cover the amount of the current U.S. Post Office First Class postage rate for CD/DVD mailers (or the envelope you have chosen) weighing 5 ounces from San Rafael, California USA to your indicated address; and

2. Identify:a. This Autodesk software name and release number;b. That you are requesting the source code for Qt v. 4.8.5, as modified by Autodesk;

andc. The above URL (www.autodesk.com/lgplsource)

so that Autodesk may properly respond to your request. The offer to receive this Qt source code via the above URL (www.autodesk.com/lgplsource) or by written request to Autodesk is valid for a period of three (3) years from the date you purchased your license to this Autodesk software. You may modify, debug and relink Qt to this Autodesk software as provided under the terms of the GNU Lesser General Public License v.2.1.

Portions related to sparsehash are Copyright (C) 2005, Google Inc. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of the project nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVENIF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

This product includes the SwiftShader Software GPU Toolkit, Copyright (c) 2003-2011 Transgaming, Inc. All rights reserved.

of 37

http://www.autodesk.com/lgplsource


Portions related to Intel® Threading Building Blocks v.4.2 are Copyright (C) 2005-2013 Intel Corporation. All Rights Reserved.

Portions relating to Libxerces-c 2.7.0 are copyright 1999-2000, 2004 The Apache Software Foundation. Licensedunder the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0. Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

Development tools and related technology provided under license from 3Dconnexion. (C) 1992-2009 3Dconnexion. All rights reserved.

Portions related to expat are Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper; Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Portions related to FIPS 180-2 SHA-224/256/384/512 are Copyright (C) 2005, 2007 Olivier Gay. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of the project nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS “AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

of 37

Portions related to MurmurHash are Copyright (c) 2009 MurmurHash2, 64-bit versions, by Austin ApplebyPermission is hereby granted, free of charge, to any person obtaining a copyof this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALLTHE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Portions related to Paul Hsieh Super Fast Hash are Copyright (c) 2004-2007 Paul Hsieh All rights reserved.Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. Neither the name of the Paul Hsieh nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Portions relating to libunwind 1.1.0 are Copyright (C) 1994-1999 The XFree86 Project, Inc. All Rights Reserved.

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THEUSE OR OTHER DEALINGS IN THE SOFTWARE.

of 37

Except as contained in this notice, the name of the XFree86 Project shall not be used in advertisingor otherwise to promote the sale, use or other dealings in this Software without prior written authorization from the XFree86 Project.

Apache Avro Copyright 2009-2012 The Apache Software FoundationLicensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

Portions related to Info-Zip Library are Copyright (c) 1990-1999 Info-ZIP. All rights reserved.

For the purposes of this copyright and license, "Info-ZIP" is defined as the following set of individuals:

Mark Adler, John Bush, Karl Davis, Harald Denker, Jean-Michel Dubois, Jean-loup Gailly, Hunter Goatley, Ian Gorman, Chris Herborth, Dirk Haase, Greg Hartwig, Robert Heath, Jonathan Hudson, Paul Kienitz, David Kirschbaum, Johnny Lee, Onno van der Linden, Igor Mandrichenko, Steve P. Miller, Sergio Monesi, Keith Owens, George Petrov, Greg Roelofs, Kai Uwe Rommel, Steve Salisbury,Dave Smith, Christian Spieler, Antoine Verheijen, Paul von Behren, Rich Wales, Mike White.

This software is provided "as is," without warranty of any kind, express or implied. In no event shall Info-ZIP or its contributors be held liable for any direct, indirect, incidental, special or consequential damages arising out of the use of or inability to use this software.

Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions:

1. Redistributions of source code must retain the above copyright notice, definition, disclaimer, and this list of conditions.

2. Redistributions in binary form must reproduce the above copyright notice, definition, disclaimer, and this list of conditions in documentation and/or other materials provided with the distribution.

3. Altered versions--including, but not limited to, ports to new operating systems, existing ports with new graphical interfaces, and dynamic, shared, or static library versions--must be plainly marked as such and must not be misrepresented as being the original source. Such altered versions also must not be misrepresented as being Info-ZIP releases--including, but not limited to, labeling of the altered versions with the names "Info-ZIP" (or any variation thereof, including, but not limited to, different capitalizations), "Pocket UnZip," "WiZ" or "MacZip" without the explicit permission of Info-ZIP. Such altered versions are further prohibited from misrepresentative use of the Zip-Bugs or Info-ZIP e-mail addresses or of the Info-ZIP URL(s).

4. Info-ZIP retains the right to use the names "Info-ZIP," "Zip," "UnZip," "WiZ," "Pocket UnZip," "Pocket Zip," and "MacZip" for its own source and binary releases.

Portions related to Libcurl are Copyright (c) 1996 - 2013, Daniel Stenberg, <[email protected]>. All rights reserved.

of 37

Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS ORIMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization of the copyright holder.

Portions relating to Windows Template Library-WTL v.8.0 are Copyright (C) Microsoft Corporation. All rights reserved.

This file is a part of the Windows Template Library. The use and distribution terms for this software are covered by the Common Public License 1.0 (http://opensource.org/licenses/cpl1.0.php) which can be found in the file CPL.TXT at the root of this distribution. By using this software in any fashion, you are agreeing to be bound by the terms of this license. You must not remove this notice, or any other, from this software.

The source code for WTL v.8.0 (and modifications made by Autodesk, if any) is available from www.autodesk.com/lgplsource.

Portions relating to ImageMagick are Copyright 1999-2011 ImageMagick Studio LLC, a non-profit organization dedicated to making software imaging solutions freely available.

Licensed under the ImageMagick License (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.imagemagick.org/script/license.phpUnless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitationsunder the License.

Portions relating to Syringe are Copyright (C) 1998-99, OK Thinking Software. This Autodesk software contains Syringe v. 2.1. Syringe is licensed under the GNU Lesser General Public License v.2.1, which can be found at http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt. A text copy of this license and the source code for Syringe v. 2.1 (and modifications made by Autodesk, if any) are included on the Media provided by Autodesk or with the download of this Autodesk software. You may modify, debug and relink Syringe to this Autodesk software as provided under the terms of the GNU Lesser General Public License v.2.1.

of 37


http://opensource.org/licenses/cpl1.0.php

Portions relating to ftplib are Copyright (C) 1996, 1997, 1998 Thomas Pfau, [email protected] 73Catherine Street, South Bound Brook, NJ, 08880. ftplib is licensed under the GNU Lesser General Public License version 2.1; which can be found at http://www.gnu.org/licenses/lgpl-2.1.txt. A text copy of this license and the source code for ftplib (and modifications made by Autodesk, if any) are included on the Media provided by Autodesk or with the download of this Autodesk software. You may modify, debug and relink ftplib to the software as provided under the terms of GNU Lesser General Public License v.2.1.

Portions relating to Zedgraph are Copyright © 2007. This Autodesk software contains Zedgraph v.5.1. Zedgraph is licensed under the GNU Lesser General Public License v.2.1, which can be found at http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt. A text copy of this license and the source code for Zedgraph v.5.1 (and modifications made by Autodesk, if any) are included on the media provided by Autodesk or with the download of this Autodesk software. You may modify, debug and relink Zedgraph to this Autodesk software as provided under the terms of the GNU Lesser General Public License v.2.1.

Portions relating to FLEXnet Publisher v.11.12.1.4 are Copyright (c) 2014 Flexera Software, Inc. All Rights Reserved.

Portions related to KQOAuth v.0.97 are authored by Johan Paul ([email protected]) http://www.johanpaul.com. This Autodesk software contains KQOAuth v.0.97, as modified by Autodesk. KQOAuth v.0.97 is licensed under the GNU Lesser General Public License v.2.1, which can be found at http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt. A text copy of this license is included on the media provided by Autodesk or with the download of this Autodesk software. You may obtain a copy of the source codefor KQOAuth v.0.97, as modified by Autodesk, from www.autodesk.com/lgplsource or by sending a written request to:




2. Identify:a. This Autodesk software name and release number;b. That you are requesting the source code for KQOAuth v.0.97, as modified by

Autodesk; andc. The above URL (www.autodesk.com/lgplsource)

so that Autodesk may properly respond to your request. The offer to receive this KQOAuth v.0.97 source code via the above URL (www.autodesk.com/lgplsource) or by written request to Autodesk is valid for a period of three(3) years from the date you purchased your license to this Autodesk software.

You may modify, debug and relink KQOAuth v.0.97 to this Autodesk software as provided under the terms of the GNU Lesser General Public License v.2.1.

of 37





http://www.johanpaul.com/

http://www.gnu.org/licenses/lgpl-2.1.txt

mailto:[email protected]

Portions relating to QAxContainer are Copyright (c) 2009 Nokia Corporation and/or its subsidiary (-ies). All rights reserved. Contact: Qt Software Information ([email protected]). This software contains QAxContainer.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:* Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.* Neither the name of Nokia Corporation and its Subsidiary (-ies) nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISINGIN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Portions relating to Qt v.4.7.2 are Copyright (c) 2011 Nokia Corporation and/or its subsidiary (-ies). All rights reserved. Contact: Qt Software Information ([email protected]). This Autodesk software contains Qt v.4.7.2. Qt is licensed under the GNU Lesser General Public License v.2.1, which can be found at http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt. A text copy of this license is included on the media provided by Autodesk or with the download of this Autodesk software. You may obtain a copy of the source code for Qt v4.7.2 from www.autodesk.com/lgplsource or by sending a written request to:


Your written request must:1. Contain a self-addressed CD/DVD mailer (or envelope sufficiently large to hold a DVD) with postage sufficient to cover the amount of the current U.S. Post Office First Class postage rate for CD/DVD mailers (or the envelope you have chosen) weighing 5 ounces from San Rafael, California USA to your indicated address; and2. Identify: a. This Autodesk software name and release number; b. That you are requesting the source code for Qt v4.7.2; and

of 37



c. The above URL (www.autodesk.com/lgplsource)so that Autodesk may properly respond to your request. The offer to receive this Qt source code via the above URL (www.autodesk.com/lgplsource) or by written request to Autodesk is valid for a period of three (3) years from the date you purchased your license to this Autodesk software.

You may modify, debug and relink Qt to this Autodesk software as provided under the terms of the GNU Lesser General Public License v.2.1.

Portions related to CS-Map v. 14.00 are Copyright (c) 2008, Autodesk, Inc. All rights reserved.


* Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

* Neither the name of the Autodesk, Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY Autodesk, Inc. ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL Autodesk, Inc. OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Portions relating to Xerces-C++ v.3.1.1 are Copyright © 1999-2010 The Apache Software Foundation. All Rights Reserved. Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0. Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

Portions relating to Parasolid Communicator Toolkit v.27 are Copyright 2014 Siemens Product Lifecycle Management Software Inc. All rights reserved.

Portions relating to GRANITE® Interoperability Kernel v.9.0 are Copyright © 2014 Parametric Technology Corporation and/or Its Subsidiary Companies. All Rights Reserved.

of 37

http://www.apache.org/licenses/LICENSE-2.0



Portions related to ODX/CAT, ODX/CAT5, WODX/CAT5, ODX/UG, WODX/UG, and ODX/SW translators are Copyright

© CADCAM-E.COM, Inc.

Portions relating to the Visualization Toolkit (VTK) are Copyright (c) 1993-2008 Ken Martin, Will Schroeder, Bill Lorensen. All rights reserved.




* Neither name of Ken Martin, Will Schroeder, or Bill Lorensen nor the names of any contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Portions relating to JT Open Toolkit v.7.0 are Copyright 2009 Siemens Product Lifecycle Management Software Inc. All rights reserved.

ACIS® © 1989–2001 Spatial Corp.

This work contains the following software owned by Siemens Industry Software Limited:

D-CubedTM HLM © 2014. Siemens Industry Software Limited. All Rights Reserved.D-CubedTM CDM © 2014. Siemens Industry Software Limited. All Rights Reserved.

This Autodesk software contains CLAPACK v.3.2.1.Copyright (c) 1992-2011 The University of Tennessee and The University of Tennessee Research Foundation. All rights reserved.Copyright (c) 2000-2011 The University of California Berkeley. All rights reserved.Copyright (c) 2006-2011 The University of Colorado Denver. All rights reserved.

of 37


- Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.- Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer listed in this license in the documentation and/or other materials provided with the distribution.- Neither the name of the copyright holders nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

The copyright holders provide no reassurances that the source code provided does not infringe any patent, copyright, or any other intellectual property rights of third parties. The copyright holders disclaim any liability to any recipient for claims brought against recipient by any third party for infringement of that parties intellectual property rights.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

This Autodesk software contains Eigen 3.2.0. Eigen is licensed under the Mozilla Public License v.2.0, which can be found at http://www.mozilla.org/MPL/2.0/. A text copy of this license and the source code for Eigen v.3.2.0 (and modifications made by Autodesk, if any) can be found at the Autodesk website www.autodesk.com/lgplsource.

Portions relating to OpenEXR are Copyright (c) 2002-2011, Industrial Light & Magic, a division of Lucasfilm Entertainment Company Ltd. All rights reserved.


Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

Neither the name of Industrial Light & Magic nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,

of 37

http://www.mozilla.org/MPL/2.0/

PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Portions relating to LAPACK v.3.0-win are

Copyright (c) 1992-2011 The University of Tennessee and The University of Tennessee Research Foundation. All rights reserved.Copyright (c) 2000-2011 The University of California Berkeley. All rights reserved.Copyright (c) 2006-2011 The University of Colorado Denver. All rights reserved.


- Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

- Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer listed in this license in the documentation and/or other materials provided with the distribution.

- Neither the name of the copyright holders nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

The copyright holders provide no reassurances that the source code provided does not infringe any patent, copyright, or any other intellectual property rights of third parties. The copyright holders disclaim any liability to any recipient for claims brought against recipient by any third party for infringement of that parties intellectual property rights.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

This software uses the Neon library version 0.24.4.

Neon is Copyright 1999-2003 Joe Orton.Copyright 1999-2000 Tommi Komulainen Tommi.Komulainen (at) iki.fiCopyright 1999-2000, Peter Boos pedib (at) colorfullife.comCopyright 1999 Eric S. RaymondCopyright 1991, 1995, 1996, 1997 Free Software Foundation, Inc.

This Autodesk software contains Neon library version 0.24.4. Neon is licensed under the GNU Lesser General Public License v.2.1, which can be found at http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt. A text copy of this license is included on the media provided by Autodesk or with the download of this Autodesk software. You may obtain a copy of the source code for Neon from www.autodesk.com/lgplsource or by sending a written request to: Autodesk, Inc.Attention: General CounselLegal Department111 McInnis Parkway

of 37

San Rafael, CA 94903

Your written request must:1. Contain a self-addressed CD/DVD mailer (or envelope sufficiently large to hold a DVD) with postage sufficient to cover the amount of the current U.S. Post Office First Class postage rate for CD/DVD mailers (or the envelope you have chosen) weighing 5 ounces from San Rafael, California USA to your indicated address; and2. Identify:a. This Autodesk software name and release number; b. That you are requesting the source code for Neon library version 0.24.4; andc. The above URL (www.autodesk.com/lgplsource)so that Autodesk may properly respond to your request. The offer to receive this Neon source code via the above URL (www.autodesk.com/lgplsource) or by written request to Autodesk is valid for a period of three (3) years from the date you purchased your license to this Autodesk software. You may modify, debug and relink Neon to this Autodesk software as provided under the terms of the GNU Lesser General Public License v.2.1.

Portions related to Qt MFC Migration Framework are Copyright (c) 2009 Nokia Corporation and/or its subsidiary(-ies). This Autodesk software contains Qt MFC Migration Framework v.2.8, as modified by Autodesk, Inc.. Qt MFC Migration Framework is licensed under the GNU Lesser General Public License v.2.1, which can be found at http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt. A text copy of this license is included on the media provided by Autodesk or with the download of this Autodesk software. You may obtain a copy of the source code for Qt MFC Migration Frameworkv.2.8, as modified by Autodesk, Inc., from www.autodesk.com/lgplsource or by sending a written request to:Autodesk, Inc.Attention: General CounselLegal Department111 McInnis ParkwaySan Rafael, CA 94903Your written request must:1. Contain a self-addressed CD/DVD mailer (or envelope sufficiently large to hold a DVD) with postage sufficient to cover the amount of the current U.S. Post Office First Class postage rate for CD/DVD mailers (or the envelope you have chosen) weighing 5 ounces from San Rafael, California USA to your indicated address; and2. Identify:a. This Autodesk software name and release number;b. That you are requesting the source code for Qt MFC Migration Framework v.2.8, as modified by Autodesk, Inc.; andc. The above URL (www.autodesk.com/lgplsource)so that Autodesk may properly respond to your request. The offer to receive this Qt MFC MigrationFramework source code, as modified by Autodesk, Inc., via the above URL (www.autodesk.com/lgplsource) or by written request to Autodesk is valid for a period of three (3) years from the date you purchased your license to this Autodesk software. You may modify, debug and relink Qt MFC Migration Framework to this Autodesk software as provided under the terms of the GNU Lesser General Public License v.2.1.

CJSON is Copyright (c) 2009 Dave Gamble

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do

of 37

so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE

Portions are Copyright (C) 2000-2010 Developer Express Inc.

Portions relating to Syntax Editor are (c) 2002-2009 Actipro Software LLC. All rights reserved.

Typefaces © 1992 Bitstream, Inc. All rights reserved.

COPRA® MetalBender © 1989–2007 data M Software GmbH. All rights reserved.

DevExpress WinForms Controls (C) 2000-2013 Developer Express Inc. All rights reserved.

Portions relating to TetMesh v. 4.22 are © Distene S.A.S.

Portions relating to HTML Help are © 1995–2007 Microsoft Corp. All rights reserved.

Portions relating to Typefaces are © 1992, 1996 Payne Loving Trust. All rights reserved.

Portions relating to uuencode/uudecode are © 1983–2006 Regents of the University of California. Allrights reserved.

Portions relating to Stingray Objective Grid v.11.2 are © 2001–2014 Rogue Wave Software, Inc. All Rights Reserved.

Portions relating to RSA Data Security, Inc.MD5 Message-Digest Algorithm are © 1991–2007 RSA Data Security, Inc. All rights reserved.

License to copy and use this software is granted provided that it is identified as the "RSA Data Security, Inc. MD5 Message-Digest Algorithm" in all material mentioning or referencing this software or this function.

License is also granted to make and use derivative works provided that such works are identified as "derived from the RSA Data Security, Inc. MD5 Message-Digest Algorithm" in all material mentioning or referencing the derived work.

RSA Data Security, Inc. makes no representations concerning either the merchantability of this software or the suitability of this software for any particular purpose. It is provided "as is" without express or implied warranty of any kind.

of 37

These notices must be retained in any copies of any part of this documentation and/or software.

Portions relating to 2D DCM v.60 are licensed from Siemens Industry Software Limited: D-CubedTM

2D DCM © 2012. Siemens Industry Software Limited. All Rights Reserved.

SMLib™ © 1998–2007 IntegrityWare, Inc., and Solid Modeling Solutions, Inc. All rights reserved.

Lucene © Copyright (C) 1999-2004 The Apache Software Foundation. All rights reserved.

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

-------------------------------------------------libPCRE

PCRE LICENCE----------------

PCRE is a library of functions to support regular expressions whose syntax and semantics are as close as possible to those of the Perl 5 language.

Release 8 of PCRE is distributed under the terms of the "BSD" licence, as specified below. The documentation for PCRE, supplied in the "doc" directory, is distributed under the same terms as the software itself.

The basic library functions are written in C and are freestanding. Also included in the distribution is a set of C++ wrapper functions.

THE BASIC LIBRARY FUNCTIONS------------------------------------

Written by: Philip HazelEmail local part: ph10Email domain: cam.ac.uk

University of Cambridge Computing Service,Cambridge, England.

Copyright (c) 1997-2011 University of CambridgeAll rights reserved.

THE C++ WRAPPER FUNCTIONS------------------------------------

of 37

Contributed by: Google Inc.

Copyright (c) 2007-2011, Google Inc.All rights reserved.

THE "BSD" LICENCE----------------------




* Neither the name of the University of Cambridge nor the name of Google Inc. nor the names of their contributors may beused to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THEIMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BELIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, ORCONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OFSUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESSINTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER INCONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Portions relating to PropertyGrid utilities are (c) 2004 Wout de Zeeuw.

7-Zip Copyright (C) 1999-2012 Igor Pavlov.

This Autodesk software contains 7-zip. 7-zip is licensed under the GNU Lesser General Public License v.2.1, which can be found at http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt. A text copy of this license is included on the media provided by Autodesk or with the download of this Autodesk software. You may obtain a copy of the source code for 7-zip from www.autodesk.com/lgplsource or by sending a written request to:


Your written request must:

1. Contain a self-addressed CD/DVD mailer (or envelope sufficiently large to hold a DVD) with postage sufficient to cover the amount of the current U.S. Post Office First Class postage rate for CD/DVD mailers (or the envelope

of 37


you have chosen) weighing 5 ounces from San Rafael, California USA to your indicated address; and2. Identify:

a. This Autodesk software name and release number; b. That you are requesting the source code for 7-zip; andc. The above URL (www.autodesk.com/lgplsource)

so that Autodesk may properly respond to your request. The offer to receive this 7-zip source code via the above URL (www.autodesk.com/lgplsource) or by written request to Autodesk is valid for a period of three (3) years from the date you purchased your license to this Autodesk software.

You may modify, debug and relink 7-zip to this Autodesk software as provided under the terms of the GNU Lesser General Public License v.2.1.

Portions relating to Chromium Embedded Framework are licensed under the new BSD license.


1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Additional Disclaimer: The Citrix application is network-based, and performance of Autodesk Citrix Ready Applications may vary with network performance. The software does not include the Citrix application, nor does Autodesk provide direct support for issues with the Citrix application. Users should contact Citrix directlywith questions related to procurement and operation of the Citrix application.

Portions related to ezXML are Copyright 2004, 2005 Aaron Voisine, under the following license:

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT, SHALL THE AUTHORIS OR COPYRIGHT HOLDERS BE LIABLEFOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

of 37


Portions of this computer program are copyright © 1995-2011 Celartum, Inc., doing business as LizardTech.All rights reserved. MrSID is protected by U.S. Patent No. 5,710,835. Foreign Patents Pending.

Portions of this software code copyright © 2009-2013 Celartem Inc. dba LizardTech, 1008 Western Avenue, Suite 200, Seattle, WA 98104. Unauthorized use or distribution prohibited. Access to and use of this code is permitted only under license from LizardTech. Portions of the code are protected by US and foreign patents and other filings. All rights reserved. Portions utilize StdString.h Copyright © 2002 Joseph M. O’Leary.

Portions of the subdivision surface implementation technology are protected by U.S. patents 6,037,949, 6,222,553, 6,300,960, and 6,489,960 and used under license from Pixar. Use of the Pixar creasing software may require a license under patents owned by Pixar.

Portions of this product include one or more Boost libraries. Boost Software License – Version 1.0– August 17th, 2003, under the following license:

Permission is hereby granted, free of charge, to any person or organization obtaining a copy of the softwareand accompanying documentation covered by this license (the “Software”) to use, reproduce, display,distribute, execute, and transmit the Software, and to prepare derivative works of the Software, and to permitthird-parties to whom the Software is furnished to do so, all subject to the following:

The copyright notices in the Software and this entire statement, including the above license grant, thisrestriction and the following disclaimer, must be included in all copies of the Software, in whole or in part, andall derivative works of the Software, unless such copies or derivative works are solely in the form of machine-executable object code granted by a source language processor.

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULARPURPOSE, TITLE AND NON-INFRINGEMENT, IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR ANYONEDISTRIBUTING THE SOFTWARE BE LIABLE FOR ANY DAMAGES OR OTHER LIABILITY, WHETHER IN CONTRACT,TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OROTHER DEALINGS IN THE SOFTWARE.

Certain portions Copyright © 2011 Bentley Systems, Incorporated. All rights reserved.

Portions related to Poco C++ Libraries are Copyright © 2013 Applied Informatics Software Engineering GmbH and Contributors. Boost Software License - Version 1.0 - August 17th, 2003

Permission is hereby granted, free of charge, to any person or organization obtaining a copy of the software and accompanying documentation covered by this license (the "Software") to use, reproduce, display, distribute, execute, and transmit the Software, and to prepare derivative works of theSoftware, and to permit third-parties to whom the Software is furnished to do so, all subject to the following:The copyright notices in the Software and this entire statement, including the above license grant, this restriction and the following disclaimer, must be included in all copies of the Software, in whole or in part, and all derivative works of the Software, unless such copies or derivative works are solely in the form of machine-executable object code generated by a source language processor.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE FOR ANY DAMAGES OR OTHER LIABILITY, WHETHER IN CONTRACT,TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Portions related to WiX Toolset v3.7 are Copyright (c) 2004, Outercurve Foundation.

of 37

This software is released under the Microsoft Reciprocal License (MS-RL) (the "License"); you may not use the software except in compliance with the License.

The text of the Microsoft Reciprocal License (MS-RL) can be found online at: http://opensource.org/licenses/ms-rl (see below).The source code for WiX Toolset (and modifications made by Autodesk, if any) is available from www.autodesk.com/lgplsourceMicrosoft Reciprocal License (MS-RL)This license governs use of the accompanying software. If you use the software, you accept this license. If youdo not accept the license, do not use the software.

1. Definitions The terms "reproduce," "reproduction," "derivative works," and "distribution" have the same meaning here asunder U.S. copyright law. A "contribution" is the original software, or any additions or changes to the software. A "contributor" is any person that distributes its contribution under this license. "Licensed patents" are a contributor's patent claims that read directly on its contribution.

2. Grant of Rights (A) Copyright Grant- Subject to the terms of this license, including the license conditions and limitations in section 3, each contributor grants you a non-exclusive, worldwide, royalty-free copyright license to reproduce its contribution, prepare derivative works of its contribution, and distribute its contribution or any derivative works that you create. (B) Patent Grant- Subject to the terms of this license, including the license conditions and limitations in section 3, each contributor grants you a non-exclusive, worldwide, royalty-free license under its licensed patents to make, have made, use, sell, offer for sale, import, and/or otherwise dispose of its contribution in the software or derivative works of the contribution in the software.

3. Conditions and Limitations (A) Reciprocal Grants- For any file you distribute that contains code from the software (in source code or binary format), you must provide recipients the source code to that file along with a copy of this license, whichlicense will govern that file. You may license other files that are entirely your own work and do not contain code from the software under any terms you choose. (B) No Trademark License- This license does not grant you rights to use any contributors' name, logo, or trademarks. (C) If you bring a patent claim against any contributor over patents that you claim are infringed by the software, your patent license from such contributor to the software ends automatically. (D) If you distribute any portion of the software, you must retain all copyright, patent, trademark, and attribution notices that are present in the software. (E) If you distribute any portion of the software in source code form, you may do so only under this license byincluding a complete copy of this license with your distribution. If you distribute any portion of the software in compiled or object code form, you may only do so under a license that complies with this license. (F) The software is licensed "as-is." You bear the risk of using it. The contributors give no express warranties,guarantees or conditions. You may have additional consumer rights under your local laws which this license cannot change. To the extent permitted under your local laws, the contributors exclude the implied warranties of merchantability, fitness for a particular purpose and non-infringement.

Portions related to Log4CPLUS v 1.1.1 are Copyright (C) 1999--2009 Contributors to log4cplus project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED “AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE APACHE SOFTWARE FOUNDATION OR ITS

of 37


http://opensource.org/licenses/ms-rl

CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

This Autodesk software contains OpenSSL plugin to Qt Cryptographic Architecture v2.0.0 beta3 (OpenSSL plugin to QCA), as modified by Autodesk. OpenSSL plugin to QCA is licensed under the GNU Lesser General Public License v.2.1, which can be found at http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt. A text copy of this license is included on the media provided by Autodesk or with the download of this Autodesk software. You may obtain a copy of the source code for OpenSSL plugin to QCA v2.0.0 beta3, as modified by Autodesk, from www.autodesk.com/lgplsource or by sending a written request to:Autodesk, Inc.Attention: General CounselLegal Department111 McInnis ParkwaySan Rafael, CA 94903Your written request must:1. Contain a self-addressed CD/DVD mailer (or envelope sufficiently large to hold a DVD) with postage sufficient to cover the amount of the current U.S. Post Office First Class postage rate for CD/DVD mailers (or the envelope you have chosen) weighing 5 ounces from San Rafael, California USA to your indicated address; and2. Identify:a. This Autodesk software name and release number;b. That you are requesting the source code for OpenSSL plugin to QCA v2.0.0 beta3, as modified by Autodesk; andc. The above URL (www.autodesk.com/lgplsource)so that Autodesk may properly respond to your request. The offer to receive this OpenSSL plugin to QCA source code via the above URL (www.autodesk.com/lgplsource) or by written request to Autodesk is valid for a period of three (3) years fromthe date you purchased your license to this Autodesk software. You may modify, debug and relink OpenSSL plugin to QCA to this Autodesk software as provided under the terms of the GNU Lesser General Public License v.2.1.

Portions related to QJson v 0.8.1 are

Copyright (C) 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.Copyright (C) 2009 Flavio Castelli <[email protected]> 2009 Frank Osterfeld <[email protected]>Copyright (C) 2008 Flavio Castelli <[email protected]>Copyright (C) 2009 Till Adam <[email protected]>Copyright (C) 2009 Michael Leupold <[email protected]>Copyright (C) 2009 Flavio Castelli <[email protected]>Copyright (C) 2009 Frank Osterfeld <[email protected]>Copyright (C) 2009 Pino Toscano <[email protected]>Copyright (C) 2010 Flavio Castelli <[email protected]>

This Autodesk software contains QJson v.0.8.1, as modified by Autodesk, Inc. QJson is licensed under the GNU Lesser General Public License v.2.1, which can be found at http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt. A text copy of this license is included on the media provided by Autodesk or with the download of this Autodesk software. You may obtain acopy of the source code for QJson v.0.8.1 as modified by Autodesk, Inc. from www.autodesk.com/lgplsource or by sending a written request to:Autodesk, Inc.

of 37


Attention: General CounselLegal Department111 McInnis ParkwaySan Rafael, CA 94903Your written request must:1. Contain a self-addressed CD/DVD mailer (or envelope sufficiently large to hold a DVD) with postage sufficient to cover the amount of the current U.S. Post Office First Class postage rate for CD/DVD mailers (or the envelope you have chosen) weighing 5 ounces from San Rafael, California USA to your indicated address; and2. Identify:a. This Autodesk software name and release number;b. That you are requesting the source code for QJson v.0.8.1, as modified by Autodesk; andc. The above URL (www.autodesk.com/lgplsource)so that Autodesk may properly respond to your request. The offer to receive this QJson v 0.8.1 source code via the above URL (www.autodesk.com/lgplsource) or by written request to Autodesk is valid for a period of three (3) years from the date you purchased your license to this Autodesk software. You may modify, debug and relink QJson v0.8.1 to this Autodesk software as provided under the terms of the GNU Lesser General Public License v.2.1.

Portions related to QOAuth are Copyright (C) 2010 Dominik Kapusta <[email protected]>This Autodesk software contains QOAuth v 1.0, as modified by Autodesk. QOAuth is licensed under the GNU Lesser General Public License v.2.1, which can be found at http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt. A text copy of this license is included on the media provided by Autodesk or with the download of this Autodesk software. You may obtain a copy of the source code for QOAuth v 1.0, as modified by Autodesk, from www.autodesk.com/lgplsource or by sending a written request to:Autodesk, Inc.Attention: General CounselLegal Department111 McInnis ParkwaySan Rafael, CA 94903Your written request must:1. Contain a self-addressed CD/DVD mailer (or envelope sufficiently large to hold a DVD) with postage sufficient to cover the amount of the current U.S. Post Office First Class postage rate for CD/DVD mailers (or the envelope you have chosen) weighing 5 ounces from San Rafael, California USA to your indicated address; and2. Identify:a. This Autodesk software name and release number;b. That you are requesting the source code for QOAuth v 1.0, as modified by Autodesk; andc. The above URL (www.autodesk.com/lgplsource)so that Autodesk may properly respond to your request. The offer to receive this QOAuth v 1.0 source code via the above URL (www.autodesk.com/lgplsource) or by written request to Autodesk is valid for a period of three (3) years from the date you purchased your license to this Autodesk software. You may modify, debug and relink QOAuth v 1.0 to this Autodesk software as provided under the terms of the GNU Lesser General Public License v.2.1.

Portions related to AXIS2/C v1.6.0 are Copyright (C) 2009 The Apache Software Foundation. Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copyof the License at http://www.apache.org/licenses/LICENSE-2.0. Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

of 37

Portions related to libiconv are Copyright 1999-2003 Free Software Foundation, Inc. This Autodesk software contains libiconv v.1.9.2. libiconv is licensed under the GNU Lesser General Public License v.2.1, which can be found at http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt. A text copy of this license is included on the media provided by Autodesk or with the download of this Autodesk software. You may obtain a copy of the source code for libiconv v.1.9.2 from www.autodesk.com/lgplsource or by sending a written request to:Autodesk, Inc.Attention: General CounselLegal Department111 McInnis ParkwaySan Rafael, CA 94903Your written request must:1. Contain a self-addressed CD/DVD mailer (or envelope sufficiently large to hold a DVD) with postage sufficient to cover the amount of the current U.S. Post Office First Class postage rate for CD/DVD mailers (or the envelope you have chosen) weighing 5 ounces from San Rafael, California USA to your indicated address; and2. Identify: a. This Autodesk software name and release number;b. That you are requesting the source code for libiconv v.1.9.2; andc. The above URL (www.autodesk.com/lgplsource)so that Autodesk may properly respond to your request. The offer to receive this libiconv v.1.9.2 source code via the above URL (www.autodesk.com/lgplsource) or by written request to Autodesk is valid for a period of three (3) years from the date you purchased your license to this Autodesk software. You may modify, debug and relink libiconv to this Autodesk software as provided under the terms of the GNU Lesser General Public License v.2.1.

Copyright © 1996 2009 Acresso Software Inc. and/or InstallShield Co. Inc. All Rights Reserved.

This product contains proprietary and confidential technology, information and creative works owned by Acresso Software Inc. and/or InstallShield Co. Inc. and their respective licensors, if any. Any use, copying, publication, distribution, display, modification, or transmission of such technology in whole or in part in any form or by any means without the prior express written permission of Acresso Software Inc. and/or InstallShield Co. Inc. is strictly prohibited. Except where expressly provided by Acresso Software Inc. and/or InstallShield Co. Inc. in writing, possession of this technology shall not be construed to confer any license or rights under any Acresso Software Inc. and/or InstallShield Co. Inc. intellectual property rights, whether by estoppel, implication, or otherwise.

All copies of the technology and related information, if allowed by Acresso Software Inc. and/or InstallShield Co. Inc., must display this notice of copyright and ownership in full.

Trademarks

Acresso, AdminStudio, FLEXnet Connect, InstallShield, InstallShield Developer, InstallShield DevStudio, InstallShield Professional, OneClickInstall, and QuickPatch are registered trademarks or trademarks of Acresso Software Inc. and/or InstallShield Co. Inc. in the United States of America and/or other countries. All other brand and product names mentioned herein are the trademarks and registered trademarks of their respective owners.

Restricted Rights Legend

The software and documentation are commercial items, as that term is defined at 48 C.F.R. §2.101, consisting of commercial computer software and commercial computer software documentation, as such terms are used in 48 C.F.R. §12.212 or 48 C.F.R. §227.2702, as applicable. Consistent with 48 C.F.R. §12.212 or 48 C.F.R. §227.2702-1 through 227.7202-4, as applicable, the commercial computer software and commercial computer software documentation are being licensed to U.S. government end users (A) only as commercial items and (B) with only those rights as are granted to all other end users

of 37

pursuant to the terms and conditions set forth in the Acresso Software standard commercial agreement for this software. Unpublished rights reserved under the copyright laws of the United States of America.

Portions relating to Embree are Copyright 2009-2014 Intel Corporation. Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0. Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

Portions related to open-vcdiff are Copyright 2008 © Google, Inc. Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

---

Portions utilize Microsoft Windows Media Technologies. Copyright © 1999-2004 Microsoft Corporation. All rights reserved.

---

Certain portions Copyright (c) 2013 Bentley Systems, Incorporated. All rights reserved. Contains Bentley DGN (TM) technology by Bentley Systems, Incorporated.

---

Portions relating to SharpDevelop ic#code 4.2.0.8783 are 2012 AlphaSierraPapa for the SharpDevelop team. This Autodesk software contains SharpDevelop ic#code 4.2.0.8783. SharpDevelop ic#code is licensed under the GNU Lesser General Public License v.2.1, which can be found at http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt. A text copy of this license is included on the DVD or with the download of this Autodesk software. You may obtain a copy of thesource code for SharpDevelop ic#code 4.2.0.8783 from www.autodesk.com/lgplsource or by sending a written request to:Autodesk, Inc.Attention: General CounselLegal Department111 McInnis ParkwaySan Rafael, CA 94903Your written request must:

3. Contain a self-addressed CD/DVD mailer (or envelope sufficiently large to hold a DVD) with postage sufficient to cover the amount of the current U.S. Post Office First Class postage rate for CD/DVD mailers (or the envelope you have chosen) weighing 5 ounces from San Rafael, California USA to your indicated address; and

4. Identify:a. This Autodesk software name and release number;b. That you are requesting the source code for SharpDevelop ic#code 4.2.0.8783; andc. The above URL (www.autodesk.com/lgplsource)

of 37




so that Autodesk may properly respond to your request. The offer to receive this SharpDevelop ic#code source code via the above URL (www.autodesk.com/lgplsource) or by written request to Autodesk is valid for a period of three (3) years from the date you purchased your license to this Autodesk software. You may modify, debug and relink SharpDevelop ic#code to this Autodesk software as provided under the terms of the GNU Lesser General Public License v.2.1.

---

Portions relating to AvalonDock.dll v.1.3.3585 are © 2007-2010, Adolfo Marinucci All rights reserved.Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:* Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.* Neither the name of Adolfo Marinucci nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

-----

Portions relating to Mono.Cecil.dll v.0.9.5.0 are © 2008 - 2011 Jb Evain.Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

The demo projects "Base", "Startup" and "RichTextEditor" are licensed under these terms (MIT license):

Copyright (c) 2005, Daniel Grunwald. All rights reserved.

of 37


Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:* Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.* Neither the name of Daniel Grunwald nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

---

Portions relating to NUnit.org – Vorontsov, nunit.core.dll v.2.6.0.12051 are © 2000-2002 Philip Craig. All Rights Reserved. Copyright © 2002-2012 Charlie PooleCopyright © 2002-2004 James W. Newkirk, Michael C. Two, Alexei A. VorontsovCopyright © 2000-2002 Philip A. CraigThis software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software.Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions:1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment (see the following) in the product documentation is required.Portions Copyright © 2002-2012 Charlie Poole or Copyright © 2002-2004 James W. Newkirk, Michael C. Two, Alexei A. Vorontsov or Copyright © 2000-2002 Philip A. Craig2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software.3. This notice may not be removed or altered from any source distribution.

---

Portions relating to Debugger.Core.dll v. 4.0.0.0 are © 2007-2010, AlphaSierraPapa for the SharpDevelop Team. All rights reserved. This Autodesk software contain Debugger.Core.dll v. 4.0.0.0. Debugger.Core.dll v. 4.0.0.0 is licensed under the GNU Lesser General Public License v.2.1, which can be found at http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt. A text copy of this license is included on the DVD or with the download of this Autodesk software. You may obtaina copy of the source code for Debugger.Core.dll v. 4.0.0.0 from www.autodesk.com/lgplsource or by sending a written request to:Autodesk, Inc.Attention: General CounselLegal Department111 McInnis ParkwaySan Rafael, CA 94903

of 37





2. Identify:a. This Autodesk software name and release number;b. That you are requesting the source code for Debugger.Core.dll v. 4.0.0.0; andc. The above URL (www.autodesk.com/lgplsource)

so that Autodesk may properly respond to your request. The offer to receive this Debugger.Core.dllv. 4.0.0.0 source code via the above URL (www.autodesk.com/lgplsource) or by written request to Autodesk is valid for a period of three (3) years from the date you purchased your license to this Autodesk software. You may modify, debug and relink Debugger.Core.dll v. 4.0.0.0 to this Autodesk software as provided under the terms of the GNU Lesser General Public License v.2.1.

---

Portions relating to SharpDevelop v. 4.2.0.8783 are © 2000-2012 AlphaSierraPapa for the SharpDevelop team. This Autodesk software contains portions of SharpDevelop v. 4.2.0.8783. SharpDevelop is licensed under the GNU Lesser General Public License v.2.1, which can be found athttp://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt. A text copy of this license is included on the DVD or with the download of this Autodesk software. You may obtain a copy of the source code for SharpDevelop v.4.2.0.8783 from www.autodesk.com/lgplsource or by sending a written request to:Autodesk, Inc.Attention: General CounselLegal Department111 McInnis ParkwaySan Rafael, CA 94903Your written request must:


4. Identify:a. This Autodesk software name and release number;b. That you are requesting the source code for SharpDevelop 4.2.0.8783; andc. The above URL (www.autodesk.com/lgplsource)

so that Autodesk may properly respond to your request. The offer to receive this SharpDevelop v.4.2.0.8783 source code via the above URL (www.autodesk.com/lgplsource) or by written request to Autodesk is valid for a period of three (3) years from the date you purchased your license to thisAutodesk software. You may modify, debug and relink SharpDevelop to this Autodesk software as provided under the terms of the GNU Lesser General Public License v.2.1.

Portions relating to "AddInManager" 4.2.0.8783 are © 2000-2011 AlphaSierraPapa for the SharpDevelop team. This Autodesk software contains "AddInManager" 4.2.0.8783. "AddInManager" is licensed under the GNU Lesser General Public License v.2.1, which can be found at http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt. A text copy of this license is included on the DVD or with the download of this Autodesk software. You may obtain a copy of the source

of 37








code for "AddInManager" 4.2.0.8783 from www.autodesk.com/lgplsource or by sending a written request to:Autodesk, Inc.Attention: General CounselLegal Department111 McInnis ParkwaySan Rafael, CA 94903Your written request must:


2. Identify:a. This Autodesk software name and release number;b. That you are requesting the source code for "AddInManager" 4.2.0.8783; andc. The above URL (www.autodesk.com/lgplsource)

so that Autodesk may properly respond to your request. The offer to receive this "AddInManager" source code via the above URL (www.autodesk.com/lgplsource) or by written request to Autodesk is valid for a period of three (3) years from the date you purchased your license to this Autodesk software. You may modify, debug and relink "AddInManager" to this Autodesk software as provided under theterms of the GNU Lesser General Public License v.2.1.

---

Portions relating to IronPython.dll v.2.7.2.1001 are © [COPYRIGHT YEAR] IronPython Contributors.Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0. Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

Portions relating to AWSSDK.dll v.2.1.1.0 are © 2014 Amazon Web Services, Inc. or its affiliates. All rights reserved.Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License athttp://www.apache.org/licenses/LICENSE-2.0Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.---

Portions relating to newtonsoft.json.dll v.5.0.8 are © 2007 James Newton-KingPermission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

of 37




The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Portions relating to ASHRAE Duct Fitting Database Active X DLL Object Code form v.5.0 are © 2003American Society of Heating Refrigerating and Air Conditioning Engineers, Inc. (www.asluae.org) Used by permission. Portions relating to ASHRAE Duct Fitting Database Version v.5.0 are © [COPYRIGHT YEAR] American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.(www.ashrae.org) Used by permission.

© 2006 American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (www.ashrae.org). Material adopted by permission from ASHRAE Weather Data Viewer, Version 3.0 . The American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. assumes no liability for the use or contents of this software or its fitness for a particular application. The American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. has not reviewed this software and does not endorse, warrant, or certify its contents, use or application.

© 200..s-American Society of Heating, Refrigerating and Air-Conditioning Engineers , Inc. (www.ashrae.org). Used by permission. The American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. assumes no liability for the use or contents of this software or its fitness for a particular application. The American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. has not reviewed this software and does not endorse, warrant, or certify its contents, use or application.

---

Portions relating to Castle Windsor v. 3.2.1 are © 2004-2013 Castle Project- http://www.castleproject.org/.Portions relating to Log4Net v1.2.10 are copyright 2009 The Apache Software Foundation.Portions relating to IronPython.dll v.2.7.21001 are © [COPYRIGHT YEAR] IronPython Contributors.Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0. Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

---

Portions relating to EXPRESS Data Manager™ are intellectual property of Jotne EPM Technology A.S

---

Portions of #ziplib v. 0.85.4.369 are contributed by various parties as indicated in the individual source code files. This Autodesk software contains #ziplib. #ziplib is licensed under the GNU General Public License v.2, which can be found at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html, with Classpath exception terms, which can be found at http://www.icsharpcode.net/OpenSource/SharpZipLib/. A text copy of this license and the source

of 37

http://www.castleproject.org/

code for #ziplib (and modifications made by Autodesk, if any) are included on the media provided by Autodesk or with the download of this Autodesk software.

Apache XALAN-C Copyright (c) 1999-2012 The Apache Software FoundationThis product includes software developed at The Apache Software Foundation (http://www.apache.org/). This software is based on the ASF XERCES-C project.Portions of this software were originally based on the following: software copyright (c) 1999, IBM Corporation. (http://www.ibm.com). Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0. Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

---Certain portions Copyright (c) 2013 Bentley Systems, Incorporated. All rights reserved. Contains Bentley DGN (TM) technology by Bentley Systems, Incorporated.

---

Portions related to Approximate Nearest Neighbors (ANN) v.1.1.2 are Copyright (c) 1997-2010 University of Maryland and Sunil Arya and David Mount. All Rights Reserved. This Autodesk softwarecontains ANN v.1.1.2. ANN is licensed under the GNU Lesser General Public License v.2.1, which can be found at http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt. A text copy of this license is included on the media provided by Autodesk or with the download of this Autodesk software. You may obtain a copy of the source code for ANN v.1.1.2 from www.autodesk.com/lgplsource or by sending a written request to:


Your written request must:1. Contain a self-addressed CD/DVD mailer (or envelope sufficiently large to hold a DVD) with postagesufficient to cover the amount of the current U.S. Post Office First Class postage rate for CD/DVD mailers (or the envelope you have chosen) weighing 5 ounces from San Rafael, California USA to your indicated address; and2. Identify:a. This Autodesk software name and release number;b. That you are requesting the source code for ANN v.1.1.2; andc. The above URL (www.autodesk.com/lgplsource)so that Autodesk may properly respond to your request. The offer to receive this ANN v.1.1.2 source code via the above URL (www.autodesk.com/lgplsource) or by written request to Autodesk is valid for aperiod of three (3) years from the date you purchased your license to this Autodesk software. You may modify, debug and relink ANN to this Autodesk software as provided under the terms of the GNU Lesser General Public License v.2.1.

of 37





---

Portions relating to ER Mapper Image Compression SDK v.3.3 are (C) 1997 Earth Resource Mapping Pty. Ltd.

---

Portions relating to xerces-c_1_6_0.dll v. 1.6 © 1999-2004 The Apache Software FoundationPortions relating to xerces-c_2_6.dll v. 2.6.0 © Apache Software Foundation 2000 subject to licensing termsThe Apache Software License, Version 1.1Copyright (c) 1999-2001 The Apache Software Foundation. All rights reserved.* Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:* 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. *2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.* 3. The end-user documentation included with the redistribution, if any, must include the followingacknowledgment: "This product includes software developed by the Apache Software Foundation (http://www.apache.org/)." Alternately, this acknowledgment may appear in the software itself, if and wherever such third-party acknowledgments normally appear.* 4. The names "Xerces" and "Apache Software Foundation" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact [email protected].* 5. Products derived from this software may not be called "Apache", nor may "Apache" appear in their name, without prior written permission of the Apache Software Foundation.THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE APACHE SOFTWARE FOUNDATION OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.===========This software consists of voluntary contributions made by many individuals on behalf of the ApacheSoftware Foundation and was originally based on software copyright (c) 1999, International Business Machines, Inc., http://www.ibm.com. For more information on the Apache Software Foundation, please see <http://www.apache.org/>.

---

Portions relating to Xerces.Aec.dll v. 3.1. © 1999-2010 Apache Software FoundationLicensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0. Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT

of 37

http://www.apache.org/)

WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

---Portions relating to libjpeg software v.6b are copyright © 1991-2010, Thomas G. Lane, Guido Vollbeding. All Rights Reserved. This software is based in part on the work of the Independent JPEG Group.

---

Portions related to ezXML are Copyright 2004, 2005 Aaron Voisine, under the following license:Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT, SHALL THE AUTHORIS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

---

Portions relating to Newtonsoft.Json v.5.0.8 are © 2007 James Newton-KingPermission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

---

Portions relating to log4net v.1.2.10 © 2007 The Apache Software Foundation.Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License athttp://www.apache.org/licenses/LICENSE-2.0Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

of 37

---

Portions relating to AWS SDK for .NET v.2.1.1 are © 2014 Amazon Web Services. Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License athttp://www.apache.org/licenses/LICENSE-2.0Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

---

Portions of this computer program are copyright © 1995-2011 Celartem, Inc., doing business as LizardTech. All rights reserved. MrSID is protected by U.S. Patent No. 5,710,835. Foreign Patents Pending.

of 37