Download - Contoh Judul Master Research

7/28/2019 Contoh Judul Master Research

1/47

______________________________________________________________________________

Department of

Mechanical and Aerospace Engineering

and Engineering Mechanics _______________________________________________________________________________

Annual Report2001

Research and Scholarly Activities


2/47

DEPARTMENT OFMECHANICAL AND AEROSPACE ENGINEERING

AND ENGINEERING MECHANICS

ANNUAL REPORTJANUARY 1 - DECEMBER 31, 2001

RESEARCH AND SCHOLARLY ACTIVITIES

UNIVERSITY OF MISSOURI-ROLLAROLLA, MISSOURI


3/47

TABLE OF CONTENTS

FACULTY AND RESEARCH INTERESTS................................................................................ 2

ENROLLMENT AND DEGREES GRANTED..............................................................................7

DEPARTMENT SCHOLARSHIPS .............................................................................................. 8

DEPARTMENTAL HONOR ROLL............................................................................................ 12

STUDENT PROFESSIONAL ORGANIZATIONS .................................................................... 13

SEMINARS .................................................................................................................................. 14

GRANTS AND FUNDINGS........................................................................................................ 16 NEW GRANTS, JANUARY 1 - DECEMBER 31, 2001..................................................16

External Research Grants: .................................................................................................16Internal Research Grants:.......................................................................................20Development and Equipment Grants:....................................................................20

OTHER ACTIVE GRANTS..............................................................................................21External Research Grants: .....................................................................................21Internal Research Grants:.......................................................................................24Development and Equipment Grants:....................................................................25

SCHOLARLY ACTIVITIES........................................................................................................ 27Journal Publications:......................................................................................................... 27Published Refereed Presentations:.................................................................................... 30

Contributions to Books and Books Published: ..................................................................34Published Reviews and Abstracts:.................................................................................... 35Technical Reports: ............................................................................................................ 35

THESES AND DISSERTATIONS .............................................................................................. 36M.S. Theses....................................................................................................................... 36Ph.D. Dissertations ...........................................................................................................38

HONORS AND SPECIAL AWARDS......................................................................................... 39

PROFESSIONAL ACTIVITIES .................................................................................................. 41

Editors of Symposiums, Proceedings and Journals ...........................................................41Chairman, Co-Chairman of Technical Sessions or Conferences.......................................42Service on Technical Committees .................................................................................... 43


4/47

2

FACULTY AND RESEARCH INTERESTS

Design & Manufacturing

Joohyun Choi , Ph.D., University of Illinois at Urbana-Champaign, Assistant Professor of Mechanical Engineering. Virtual manufacturing, rapid production realization, layeredmanufacturing, CAE/CAD, machine design, laser aided intelligent manufacturing, on-line diagnosticstechniques using lasers, laser materials processing, and transport phenomena in materials processing.

Robert Landers , Ph.D., University of Michigan, Assistant Professor of Mechanical Engineering.Manufacturing, systems, and control; modeling, analysis, monitoring, and control of manufacturing

processes; metal cutting processes; laser metal deposition; integrated design and control; discreteevent systems; and digital control applications.

Ming C. Leu , Ph.D., University of California at Berkeley, Keith and Pat Bailey Distinguished

Professor of Mechanical Engineering. Rapid prototyping, intelligent manufacturing, virtual reality,CAD/CAM, robotics, mechatronics, and automatic control.

Fue-Wen "Frank" Liou , Ph.D., University of Minnesota, Professor of Mechanical Engineeringand Director of Manufacturing Engineering. Computer-aided design and manufacturing, rapid

prototyping, rapid manufacturing, lean manufacturing, and virtual prototyping.

Ashok Midha , Ph.D., University of Minnesota, Professor of Mechanical Engineering andDepartment Chairman. Mechanical design, rigid-body and compliant mechanism design, high-

performance machinery analysis and design, machine vibration and stability.

Daniel A. McAdams , Ph.D., University of Texas at Austin. Assistant Professor of MechanicalEngineering. Design theory and methodology, design for manufacturing, tolerance design, andapplied mathematics for design modeling and manufacturing representation in design.

J. Keith Nisbett , Ph.D., University of Texas at Arlington, Associate Professor and AssociateChairman for Mechanical Engineering. Kinematics, mechanical design, and synthesis of mechanisms.

Anthony Okafor , Ph.D., Michigan Technological University, Associate Professor of MechanicalEngineering. Manufacturing including intelligent machining, metal forming, machine tool dynamics,acoustic emission, sensors, multi-sensor fusion and signal processing, CNC, CAD/CAM, virtual

manufacturing, machine tool metrology, neural network and expert system applications; smartstructures including intelligent health monitoring, damage assessment of composite structures; andnon-destructive evaluation.


5/47

3

Dynamics & Controls

S. N. Balakrishnan , Ph.D., University of Texas at Austin, Professor of Aerospace Engineering.Control of aerospace and mechanical systems, flight and orbital mechanics, optimization,

identification and estimation, numerical methods, and stochastic processes, neural networks,wavelets.

Walter Eversman , Ph.D., Stanford University, Curators' Professor of Mechanical and AerospaceEngineering. Noise control, acoustics, vibrations, aircraft structural dynamics and aeroelasticity,systems and control.

K. Krishnamurthy ,Ph.D. , Washington State University, Professor of Mechanical Engineering.Intelligent control, robotics, advanced manufacturing systems.

Brad A. Miller , Ph.D., Georgia Institute of Technology, Assistant Professor of Mechanical

Engineering. Dynamics of gas lubricated bearings and seals, rotordynamics, computational methodsin dynamics, tribology, and nondestructive evaluation algorithms.

Pernicka, Henry , Ph.D. , Purdue University, Associate Professor of Aerospace Engineering.Astrodynamics, orbital mechanics, spacecraft design, spacecraft mission design, satellite attitudedynamics, nonlinear analysis, dynamics and control, and optimization.

Daniel S. Stutts , Ph.D., Purdue University, Associate Professor of Mechanical Engineering andEngineering Mechanics. Dynamics, vibrations, modeling and development of piezoactuators andtransducers-mechatronics, mechanics of bone, design of orthopedic implants, structural dynamics,optimal design, and acoustics.

Energy Conversion & HVAC

James A. Drallmeier , Ph.D., University of Illinois, Associate Professor of MechanicalEngineering. Combustion, laser based diagnostics for sprays and combustion, optical measurementsystems, fuel injection, and internal combustion engines.

Virgil J. Flanigan , Ph.D., P.E., University of Missouri-Rolla, Professor of MechanicalEngineering and Director, Center for Environmental Science & Technology. Alternate energy studiesincluding biomass gasification systems, fuel combustion studies, waste utilization and coal

characteristics, mechanical and hydraulic control systems, renewable energy sources, soybeanutilization, and soy oil extraction processes.

Homan, Kelly O ., Ph.D ., University of Illinois at Urbana Champaign, Assistant Professor of Mechanical Engineering. Fluid dynamics, heat transfer and thermodynamics of energy systems.Heat and mass transfer in buoyant flows, second-law and exergy analysis, numerical simulation of transport phenomena, and experimental methods.


6/47

4

Harry J. Sauer Jr ., Ph.D., Kansas State University, Professor of Mechanical and AerospaceEngineering. Heat transfer and thermophysical property measurements, boiling and condensation,HVAC systems, and energetics.

John W. Sheffield , Ph.D., North Carolina State University, Director, Office of UniversityOutreach & Extension, Professor of Mechanical and Aerospace Engineering. Industrial energymanagement, waste minimization and productivity enhancement, conduction heat transfer, thermalcontact conductance/resistance, phase change materials/thermal energy storage, and hydrogen energysystems.

Fluid Mechanics & Aerodynamics

Darryl J. Alofs , Ph.D., University of Michigan, Professor of Mechanical Engineering. Fluidmechanics, aerosol mechanics, atmospheric aerosols, and the role of clouds in global climate.

Fathi Finaish , Ph.D., University of Colorado-Boulder, Associate Professor of AerospaceEngineering and Associate Chair for Aerospace Engineering. Aerodynamic testing, unsteady flows,vortex dynamics in separated flows, physical and numerical flow visualizations, variable densityflows, and flow control.

Kakkattukuzhy M. Isaac , Ph.D., Virginia Polytechnic Institute and State University, AssociateProfessor of Aerospace Engineering. Fluid dynamics and combustion. Aero-structure interaction andcontrol, intelligent aircraft, active flow control, waveriders, microfluidics, MEMS, flow andcombustion in porous media, multiphase flow, emissions from combustion and evaporative systems,lean premixed combustion, combustion instability, active combustion control, atomization and

sprays, particle image velocimetry (PIV) and CFD applications in fluid dynamics and combustion problems.

Riggins, David W ., Ph.D., Virginia Polytechnic Institute and State University, Professor of Mechanical & Aerospace Engineering. Fluid dynamics, computational fluid dynamics, hypersonic

propulsion systems, computational analysis of jet mixing, flow losses and mixing enhancement incombustors, aircraft gas turbine ramjet propulsion systems, and scamjet performance.

Heat Transfer & Thermophysics

Bassem F. Armaly , Ph.D., University of California at Berkeley, Curators Professor of Mechanical Engineering. Heat transfer and fluid mechanics, thermophysical properties, heat pipes,combined conduction, convection, and radiation heat transfer problems, solar energy, cryogenics, andthermal effects in manufacturing processes. (On leave for 1 to 2 years)


7/47

5

Ta-Shen Chen , Ph.D., University of Minnesota, Curators' Professor Emeritus of MechanicalEngineering. Convective heat and mass transfer, natural and mixed convection in porous media, inseparated flows, and in condensation, linear and nonlinear instability of laminar flow, wave andthermal instability of natural and mixed convection flows, and turbulent heat transfer in complex flowgeometries in mixed convection.

Alfred L. Crosbie , Ph.D., Purdue University, Curators' Professor of Mechanical Engineering.Multidimensional radiative heat transfer, laser processing of materials, radiative heat transfer incombustion processes, microscale heat transfer, biomedical optics, interaction of radiation withconduction and convection, multiple scattering and polarization of laser beams, solutions of integralequations, and numerical heat transfer.

Umit O. Koylu, Ph.D., University of Michigan at Ann Arbor, Associate Professor of MechanicalEngineering. Combustion, environmental technology, soot formation, turbulent flames, laser diagnostics, flame radiation, formation and emission of pollutants, synthesis of nanoparticles, andmicro-energy systems.

D. C. Look Jr ., Ph.D., University of Oklahoma, Professor Emeritus of Mechanical Engineering.Experimental scattering and reflection of thermal radiation, thermophysical properties, radiative heattransfer, solar energy, polarization effects on scattering (Stokes Vector and Mueller Matrixdetermination), and fins.

H. Frederick Nelson , Ph.D., Purdue University, Professor of Aerospace Engineering. Radiativetransfer, laser-gas and/or surface interaction, aerothermochemistry, combustion, and appliedaerodynamics.

Hai-Lung Tsai , Ph.D., University of California at Berkeley, Professor of Mechanical

Engineering. Solidification processes, heat transfer and fluid mechanics in materials processing andmanufacturing (alloy casting, welding, crystal growth, metal matrix composites, injection molding),and laser-based manufacturing (laser welding, cladding, micro-machining, rapid prototyping).

Materials & Structures

Xavier J. R. Avula , Ph.D., Iowa State University, Professor Emeritus of Engineering Mechanics.Vibrations, control systems, neural networks, fuzzy systems, machinery failure diagnostics,composite materials, biomechanical systems, electric and hybrid vehicle systems, micro-electromechanical systems, and solid-fluid interaction problems.

Victor Birman , Ph.D., Technion (Israel), Professor of Mechanical & Aerospace Engineering atthe Engineering Education Center in St. Louis. Composite material structures, smart structures andmaterials, structural dynamics and vibration, buckling and dynamic stability.

K. Chandrashekhara , Ph.D., Virginia Polytechnic Institute and State University, Professor of Engineering Mechanics. Composite materials, smart structures, structural dynamics, finite elementanalysis, composite manufacturing, and experimental characterization.


8/47

6

Lokeswarappa R. Dharani , Ph.D., Clemson University, Professor of Engineering Mechanics andAerospace Engineering and Senior Investigator in Graduate Center for Materials Research.Micromechanics of bi-material interfaces, composite materials, fracture mechanics, fatigue andfailure analysis of welded structures, wear and friction in composites, fracture and failure of

laminated glass.

Gearoid P. Mac Sithigh , Ph.D., University of Minnesota, Associate Professor of EngineeringMechanics. Finite elasticity, viscoelasticity, liquid crystal hydrodynamics, solid and continuummechanics.


9/47

7

ENROLLMENT AND DEGREES GRANTED

ENROLLMENT

Doctor of PhilosophyMechanical Engineering 34Aerospace Engineering 6Engineering Mechanics 4

Master of ScienceMechanical Engineering 85Aerospace Engineering 9Engineering Mechanics 4

Bachelor of ScienceMechanical Engineering 396 *Aerospace Engineering 76 *

______________________________________________________

Total 614

*Does not include Freshman class

DEGREES AWARDED

Doctor of Philosophy

Aerospace Engineering 2Mechanical Engineering 9Engineering Mechanics 1

Master of ScienceMechanical Engineering 30Aerospace Engineering 2Engineering Mechanics 2

Bachelor of ScienceMechanical Engineering 109Aerospace Engineering 25

______________________________________________________

Total 180


10/47

8

DEPARTMENT SCHOLARSHIPS

ACADEMY OF MECHANICAL AND Tim Alfermann Keith Gettinger Nathan RuesAEROSPACE ENGINEERS Bryce Barton Matthew Kertz Brian Schoene

Angela Berring Joshua Marsh Michael Stock Jeremiah Bridges Michelle McGeorge Douglas Stroud

Kevin Daniels Joshua Petitt Jake ThompsonAE SCHOLARSHIP FUND John Barnett III Mark Creason Brad Neuville

Mary Alice Bone Katie Grantham Trent Taylor

BASSEM AND GERY ARMALY Afsheen Khamooshi Altan Tiryaki

BOEING COMPANY Christopher Keithley Martin Rust

CHEVRON Michael Essenpreis Eric Prater

CITGO Ben Frank Michael Schaefer

CHARLES COPELAND/Alumni Assoc Adam Christenson Michael Stock, Jr.

ROBERT F. DAVIDSON Ryan Besand Ryan Kuhlenbeck Bryan Pryor Jeff Hoskins

JOHN DEERE DEV-FLANIGAN Anthony Brandon Christopher Deck Eric Prater Christina Braune Eric Distler Douglas SalmonBuford Brister, Jr. Kenneth Epperson Matthew Selter

Nicholas Brueggemann Travis Fetter Jason Skinner Eileen Chambers Wojciech Galecki Katherine SmithJoshua Clements Jonathan Gettinger Douglas Spooler Joshua Collier Jason Graseser Larry Stemberger Jason Crum Andrew Kindle Jeffrey Stroessner Brian Cunningham Mark Kreikemeier Michael Stroupe

James Davis John Miller Jake ThompsonMarc Davis Patrick Myers Nathan Yamnitz

FAUCETT ENDOWED Bryce Barton Adam Christenson Joshua PetersonJason Banaskavich Elizabeth Copley Brandon WieschhausJessica Bigas

FINLEY ENDOWED/Alumni Assoc. Jason Banaskavich Mary Alice Bone

KAISER ALUMINUM ENDOWED Tim Alferman LeAnn Fantini Amanda MerwinBrian Applegate Nolan Finch Nicholas MortonRuth Ault Derek Fryar Nathan MundisJohn Barnett III Sean Garceau Brian Pryor

Justin Bennett Jonathan Gettinger Gary PostAngela Berring Patrick Gill David RedfearnDallas Blasdel Charles Haning Scott RocheAdam Boies Donald Hibler III Brian SchoeneJeremy Bolin Tracy Hockenhull Michael Schaefer Jeremiah Bridges Daniel Irsik Casey SchultzBrian Carlson Brian Jones Jason SidwellKevin Daniels Afsheen Khamoosi Michael Stock, Jr

Nelson Day Kerry Krus Michael StroupeMichael Drake Michelle McGeorge Marie Vogan


11/47

9

Aaron Embry Matthew Markham

MAYTAG Joseph Dust

MECHANICAL ENGINEERING Timothy Alfermann Ben Frank Alex RigoniSCHOLARSHIP FUND Jason Banaskavich Wojciech Galecki Scot Roche

John Barnett III Patrick Gill Brian SchoeneDallas Blasdel Charles Haning Mark SchreweAnthony Brandon Kerry Krus Jesse SmithBrian Carlson Amanda Merwin Joseph StehlyAdam Christenson Gary Post Michael Stock Jr.Anthony Clark Eric Prater Aaron SonnenscheinBrian Cunningham Brian Pryor Doug StroudJames Davis Jeffrey Pleus Kurtis SuellentropJoshua Durham

JAMES J. MURPHY/Alumni Assoc. Brian Cunningham Danielle Miller

REMINGTON ENDOWED Jeremiah Bridges John Hansen Jeff HoskinsGabriel Converse

JOHN WM. AND CAMILLE RICKETTS Kevin McGuire II Matt Moseley Corry SmithSCHOLARS

RAYFERD D. ROUTH Nolan Finch Jonathan Krepps Alex RigoniMatthew Kertz

SAUER ENDOWED Brandon Hencey Wojeciech Galecki Jason Sidwell

SCHOENTHALER Brian Jones Nathan Rues

WYATT ENDOWED Jason Banaskavich Jeremy Bolin Brandon HenceyBryce Barton

MECHANICAL AND AEROSPACE ENGINEERING DISTINGUISHED STUDENT AWARDS

Timothy AlfermannMary BoneDouglas Bristow

Katie GranthamJoshua PetittDouglas Stroud

Christopher Wilson

2001 FELLOWSHIPS

Chancellors FellowshipsSara Armbruster Eric Johnson Rory RobertsGlen Curten Kyle Koederitz Chris WilsonKatie Grantham

Deans FellowshipsXingyan Bai Scot Roche Changlin SunQiang Chen Jianzhong Ruan Lei YanKuifeng Hu Yuelin Shen Gabriel ZlavogZhongwu Huang

National Science FoundationRegina Daugherty Sara Armbruster Brian Kaul

National Aeronautics and Space Administration Katie Granthan Eric Johnson Tim Moran


12/47

10

ME & AE STUDENTS RECEIVING OTHER CAMPUS SCHOLARSHIPS

Armin AhlheimBradley AlbrechtTim AlfermannJeremy Ansley

David Antalick, Jr.Brian ApplegateJennifer AroraDavid Asselmeier Matthew AtonTimothy AtwellRuth AultDavid Averbeck IIDavid BacaCameron Bahram-ahiRobert BairdBenjamin Baker Jonathan Baker Paul Balaster Jason BanaskavichBrett Barker John Barnett IIIBryce BartonLucas BauersJustin BennettFesseha BerheRyan BesandJessica BigasDallas BlasdelAndrew Bodenhamer Adam BoiesJeremy BolinMary Alice BoneChristopher BorgmannJames BowlingBenjamin BraatzJoseph BradleyMichael BradleyIlex Brandenberger Anthony BrandonChristina BrauneJeremiah BridgesBuford Brister Douglas BristowGary Brodersen

Curtis BrownLindsey BrownTimothy BrownMark Brownfield

Nicholas BrueggemannJeremy BryantDavid BurdChris Buscher Mark Bussman

Jason CahillAlbert CaseyBrian CarlsonAmanda Carter

Eric Carter Jason CerranoPhilip ChaddertonMatthew Chandler Eric CharlesMatthew ChesebroughSara ChiadoAdam ChristensonJustin ClarityAndrew Clark Clayton Clark David CoitJoshua Collier Autumn CollinsDonald Cone Jr.Gabriel ConverseWilliam CooksonAndrew CopelandElizabeth CopleyJared CoxJonathan CrahanMark Creason

Nikita CroninJonathan CrossJarred CrouchShawn CullenCharles CulpBrian CunninghamRyan CurranBrian DameronMichael Dancer Kevin DanielsRobert DanzBradley DaudermanRegina Daugherty

Natalie DavidsonJames DavisLindsey DavisMarc Davis

Nelson Day

Troy DeBeaumontJoey DeRousseJames DietzJacob DoyleDavid DrakeMichael DrakeArthur DrennenJames DropinskiCole Drussa

Joshua DurhamJason DuryeaJoseph DustJames Dymott

Welsey Eberlin Nicholas EcksteinCurt EggenBronson Eick Steven Eickhoff Amanda EllsworthAaron EmbryKenneth EnnisLindsay EpsteinMichael EssenpreisChristopher EssigScott Essner Cody EubanksLeAnn FantiniDaniel FeigheryMatthew Feldmeier David Fenstermacher

Nolan FinchLaura Fisher Laura Flagler-AllenRyan Fletcher Myron FlippinJason Fouraker Ben Frank Brian FuhrmannAaron GageWojciech GaleckiKathryn Gallagher Sean GarceauRonald Garr Keith Gettinger Jonathan Gettinger Matthe GiaraffaMatthew GildehausPatrick GillKeith Gittemeier Matthew GluesenkampRichard GorrellCraig GoodloeMatthew Goska

Jason Graeser Katie GranthamMatthew GreenJohn Griner Jeffrey GrossRobert GuttenbergJohn HaasJeffrey HahnAdam Hale

Kathryn HameraTimothy HandCharles HaningJohn Hansen

Shane Hanson Nathan HarlDavid HarrisMatthew HartmanTravis HartmanPhilip Heller IIBrandon HenceyJacob HenleyDirk HesemanMichael HessMichael Hibbeler William HibbitsDonald Hibler IIIEdward HillKevin HixsonStephen HoffmannTimothy HorstmannElizabeth HolderbyTimothy HorstmannChristopher HorvathJeffrey HoskinsAmy Huber Shane Huckabee

Nathaniel Huff Thomas Hulsey IIIRyan HutchesonDaniel Irsik Gerald JacksonStephen JacobsenTravis JenningsTrevor JesseeMark JohnsonBrian Jones

Nathan JonesJohn JuddBrian KaulChristopher KeithleyBrian KekecIsaiah KelloggChristian Kessler

Jason KetchelAfhseen KhamooshiLaura KimbelDaniel KingreeTimothy KleinJoseph Kleinigger Jason KoszolaGentry Kramer Kerry Krus


13/47

11

Ryan Kuhlenbeck John LackmanJonathan LatallQuang LeDavin LebovskyCoby Lewis

Jonathan Licklider Ben JoebHal LoketMichael LuehrmanHanes LuntzSteven MaddenTimothy MaddenMichael MahoneyMatthew MarkhamJoshua MarshSarah MassieBryan Mather Kyle Maxeiner Michael Mayer

Nichole McBrideJason McCulloughMichelle McGeorgeKevin McGuire IIJoseph MclainJustin McMenamyChristian MendozeAlexander MendrygalAlexandria MerrittAmanda MerwinBryan Meyer Jacob Meyer Patrick Meyer Jeffery MeyersTodd MikelionisCarl Miller Danielle Miller Jason MillsAdam MinksBrian MitchellDavid MoechnigClaudia MojicaJames MonroeElijah MontgomeryDaniel Morgan

Nicholas Morton

Matthew Moseley Nathan MundisMatthew MurphyMike Mirray

Matthew MyersPatrick MyersWilliam NanceGregory NaslundDavid NeelyMatthew Neil

Karl NeumanBradley NeuvilleParris NgAnthony NguyenCasey NordwaldOmoghene Obahor Jesse Oberbeck MatthewObernuefemannRichard OrmsbyJames OutlandIvan Pajewski

Nathan Palmer Christian Parker Bradley PauleyChad PeariaSandeep PedamJack PennutoAndrew PereirasEthan PetersonOpie PetersonJoshua PetersonJeffrey PleusKerry PoppaMatthew Porter Gary PostEric Prater Joshua Preusser Aaron PrewittBryan Pryor Andrew RabinJeffrey RaggettChristian RasmussenLeah Rechner David RedfearnChristopher ReinkeJohn RhoadsGregory Rieker Alexandro Rigoni

Neal Ritchey

Norman RobertsonJoshua RobinsonScot RocheMichael Roetheli

Matthew Rohweder Sarah RosenbaumWilliam RothJeffrey Rottler William RowdenRyan Rubly

Stephen Rucker Nathan RuesTessa RussellDouglas SalmonMichael Schaefer Brian Schaffer Erin Schepker ConstantinoSchillebeeckxDerek SchmitzJohn SchmitzBrian SchoeneKyle Schrader Laura Schreiter Mark SchreweAdam SchumanBrent Schumer Josef SealeJustin SemschKevin Shank Brendan ShaughnessyWilliam Sherwood Jr Alison SieversBarrett SillJohn Skola Jr.Corry SmithJeremy SmithJesse SmithRichard SmithTiffany SmithTravis Snider Aaron SonnenscheinJennifer SpeidelDouglas Spooler Zachary StankeeSamuel SteeleJoseph StehlyJoy SteinAbbie StewartMichael Stock, Jr.

Ryan StockampRyan StottJames Stovall IISamuel Strackeljahn

Elliot StrathanDouglas StroudMichael StroupeHenry Suter IIIPaul Taylor Trent Taylor

Michael TeagueLevi TerhuneJake ThompsonJames TinsleyDouglas TolbertMichael ToumaPaul Treasurer Eric TrostZachary VogelPatrick VogtKurt Wagner David Walker Rebecca Walker Megan WallLeonard WalleyTimothy Walter Jerred WebbDarrick WhiteJoseph WhiteWilliam WhiteAaron WhitneyJeffery Wienhoff Brandon WieschhausJoshua Wigger Gary WilburnKelly WilkersonEli WillcocksonJustin WillhiteArthur WilliamsCurt WilliamsDavid WilliamsKristin WilliamsMatthew WilliamsChristopher WilsonKenneth WilsonRobert Wood, Jr.Benjamin WrightElizabeth WylieAaron Young


14/47

12

DEPARTMENTAL HONOR ROLL

The names listed below were selected by the faculty of Mechanical and Aerospace Engineering Department for the honor roll during the Spring and Fall semesters of 2001. To qualify for this honor, the student must complete at least twelve credithours during the previous semester with a grade point average of 3.5 or better.

MECHANICAL ENGINEERING PROGRAM

SENIORS (CONTD) (CONTD) JUNIORS SOPHOMORES

Ault, Ruth Finch, Nolan Meyers, Patrick Ahlheim, Armin Bahram-Ahi, CameronBalaster, Paul Fuhrmann, Brian Neer, Adam Al-Awadhi, Ibrahim Chandler, MatthewBanakavich, Jason Galecki, Wojciech Norwald, Casey Bauers, Lucas Collins, Autumn DavaeBerring, Angela George, Oageng Oberbeck, Jesse Besand, Ryan Curran, RyanBodenhamer, Andrew Griner, John Pennuto, Jack Casey, Corey Flippin, MyronBraune, Christina Haning, Charles Redfearn, David Drennen, Stacy Gluesenkamp, MatthewBrown, Dustin Heller II, Philip Rhoads, John Dymott, James Ketchel, JasonBrown, Timothy Herzbert, John Richards, Jeremiah Eckstein, Nicholas Loket, HalBurd, David Horstmann, Timothy Rieker, Gregory Eickhoff, Steven Robinson, JoshuaChristenson, Adam Hutcheson, Ryan Rigoni, Alexandro Guttenberg, Robert Sill, BarrettCollier, Joshua Jackson, Gerald Rohrer, Clay Hartman, TravisConverse, Gabriel Judd, John Rues, Nathan Hill, AndrewCopley, Elizabeth Kingree, Daniel Schrader, Kyle Holderby, ElizabethCrahan, Jonathan Kriekemeier, Kraig Schrewe, Mark Lubiewski, JohnCronin, Nikitta Krus, Kerry Sievers, Alison Mayer, MichaelDaniels, Kevin Kuhlenbeck, Ryan Sistler, David McCullough, JasonDaRocha, Tiago Markham, Matthew Smith, Jeremy Miller, DanielleDebaumont, Troy McGuire II, Kevin Spooler, Douglas Obernuefemann, MatthewDersch, Joseph McMenamy, Justin Stock Jr., Michael Outland, JamesDietz, James Meyer, Patrick Srathman, Elliot Sherwood Jr., WilliamDrennen, Arthur Minks, Adam Suellentrop, Kurtis White, WIlliamEllsworth, Amada Mitchell, Brian Suter III, Henry Willhite, JustinFetter, Travis Mojica, Claudia VanDyke, Jamie Williams, Curt

AEROSPACE ENGINEERING PROGRAM

SENIORS (CONTD) JUNIORS SOPHOMORES

Barnett III, John McGeorge, Michelle Cookson, William Dancer, MichaelBoselly, Jeremy Mundis, Nathan Gallagher, Kathryn Gage, AaronBrown, Curtis Landon Roetheli, Michael Hamera, Kathryn Goodloe, CraigCarlson, Brian Schmitz, Derek Harris, David Hanson, Shane

Creason, Mark Schoene, Brian Kellogg, Isaiah McBride, NicoleDrake, David Selander, Jennifer Kramer, GentryGittemeier, Keith Taylor, Trent Neil, MatthewHahn, Jeffrey Touma, Jr. Michael Obahor, OmogheneKeithley, Christopher Wilkerson, Kelly Rottler, JeffreyKhamooshi, Afsheen Tolbert, Douglas


15/47

13

STUDENT PROFESSIONAL ORGANIZATIONS

American Institute of Aeronautics and Astronautics (AIAA)

President: Mary Bone (W/S) Faculty Advisor: Dr. H. F. Nelson

Paul Himmell (F/S)

American Society of Heating, Refrigerating and Air Conditioning Engineers (ASHRAE)

President: Milind Mainkar (W/S) Faculty Advisor: Dr. H. J. Sauer, Jr.Patrick Travers (F/S)

American Society of Mechanical Engineers (ASME)

President: Jonathan Gettinger (W/S) Faculty Advisor: Dr. J. K. NisbettKurtis Suellentrop (F/S)

Pi Tau Sigma (ME Honor Society)

President: Brian Kaul (W/S) Faculty Advisor: Dr. J. ChoiJosh Marsh (F/S)

Sigma Gamma Tau (AE Honor Society)

President: Jeremy Boselly (W/ S) Faculty Advisor: Dr. S. N. BalakrishnanJeff Hahn (F/S)

UMR Human Powered Vehicle (HPV)

Team Leader: Brian Jones Faculty Advisor: Dr. S. Roy

UMR Formula SAE Racing Team

Team Leader: Dustin Brown Faculty Advisor: Dr. D. Stutts

UMR Solar Car Team

Team Leader: Gail Lueck ME Faculty Advisor: Dr. K.M. Isaac

Nathan Rues, Head ME

UMR Advanced AeroVehicle Group (AAVG) Faculty Advisor: Dr. F. Finaish

President: Keith Gray


16/47

14

SEMINARS

2001

DATE TOPIC SPEAKER

February 1, 2001 Insect Flight: Flexible Structures and Roy Beckemeyer Vorticity Control in Action

February 8, 2001 The Design of Glass Microspheres as Delbert E. DayRadiation Delivery Vehicles

February 15, 2001 Simulations of Synthetic Jet Control Andrew Cary

February 26, 2001 Ethics Lecturer & Forensic Engineer Roger M. Boisjoly

March 1, 2001 Dual Neural Networks for Control S. N. Balakrishnan

March 8, 2001 Search For the Turbulent Mixing Mechanism G. M. FaethOf Combusting Sprays

April 19, 2001 How to Design A Successful Product Philip L. Chen

April 23, 2001 Optimal Estimation of Spacecraft Actuator Mason A. Peck Alignments through Attitude-DeterminationTechniques

April 25, 2001 An Experimental Study of Heat Transfer And Vinod Narayanan

Flow Field Associated With a Slot JetReattachment Nozzle

April 26, 2001 Satellite Formation Flying Craig A. McLaughlin

April 30, 2001 The Development of Advanced Thermal Roy CrawfordSystem Simulation Strategies for the DesignAnd Analysis of Air Conditioning andRefrigeration Equipment

May 2, 2001 Thermodynamics and Convective Dynamics Kelly O. Homan

Of Thermal Energy Storage

May 3, 2001 Stovl Aircraft Acoustic Environments Alan Landmann

May 4, 2001 Generation and Tracking of Optimal Drian DriessenTrajectories of Dynamics Systems


17/47

15

May 7, 2001 Current Research Activities at San Jose Hank Pernicka State University

May 8, 2001 Implementation of a Flexure-Based John SpeichMicromanipulator in A Scaled

Bilateral Telemanipulation System

May 11, 2001 Development of an Advanced Control David RubensteinScheme for a Partially Spinning Projectile

May 14, 2001 Development of Domain and Solver Joshua D. SummersIndependent Method for MechanicalEngineering Embodiment Design ThroughThe Geometric Exemplar

August 30, 2001 The Engineering Science Program At DOES Bassem Armaly

Office of Basic Energy Sciences

September 13, 2001 Architectural Issues and Actuation Modes Kenneth J. WaldronIn Robots with Discontinuous Contact

September 27, 2001 Solar Car Energy Management Modeling Douglas R. Carroll

October 18, 2001 Digital Imaging and Solid Freeform Steve SchmittFabrication in Dentistry

November 1, 2001 Reconfigurable Manufacturing Systems A. Galip Ulsoy

November 8, 2001 Low-Order Map Approximations of Cyclic Robert M. Wagner Variations in Lean-Fueled Spark-IgnitionEngines

November 29, 2001 Some Examples of Tough Open Problems Donald Wunsch IIIn Neurocomputing


18/47

16

GRANTS AND FUNDINGS

NEW GRANTS, JANUARY 1 - DECEMBER 31, 2001

External Research Grants:

Armaly, B. F. , National Science Foundation, Mixed Convection in Three DimensionalSeparated Flow, $54,139, June 1, 2001 May 31, 2002.

Balakrishnan, S . N. (75%) and Tikku, A. (25%), U.S. Army Space and Missile, IntegratedGuidance and Estimation for Zero Miss Missiles, $50,000, September 21, 1999 September 20, 2002.

Balakrishnan, S. N. , NASA, Adaptive Critic Based Reconfigurable Controller, $60,000,February 1, 2001 January 31, 2002.

Balakrishnan, S. N., Anteon Corp., Integrated Guidance and Control with SDRE and Neural

Networks, $27,000, March 1, 2001 April 30, 2002.

Balakrishnan, S. N. , NASA, Robust Adaptive Critic Based Neurocontroller for ReusableLaunch Vehicles, $34,999, August 1, 2001 July 31, 2002.

Balakrishnan, S. N. , National Science Foundation, Adaptive Critic Based Neurocontrol for Distributed Parameter Systems, $108,841, September 1, 2001 August 31, 2002.

Birman, V. , Office of Naval Research, Theory of Naval Sandwich Structures with MultipleFacings, $2,636 + $85,336 + $15,281, October 1, 2001 August 15, 2002.

Birman, V. , University of Cincinnati, Thermomechanical Problems of Composite AerospaceShell Structures, $13,000, October 1, 2000 September 30, 2001.

Chandrashekhara, K. , Manufacturing Research and Training Center, Dynamic Analysis of V-Ribbed Belt System, $17,500, July 1, 2000 June 30, 2001 (awarded 3/28/01).

Chandrashekhara, K. (50%) and Flanigan, V. (50%), Manufacturing Research and TrainingCenter, Improved Soybean Based Resin System for Pultrusion, $7,500, July 1, 2000 June 30, 2001 (awarded 3/28/01).

Chandrashekhara, K. (34%), Flanigan, V. (33%%), and Nanni, A. (33%), ManufacturingResearch and Training Center, Low Cost Renewable Resin for Pultruded Products,$25,000, July 1, 2000 June 30, 2001 (awarded 3/28/01).

Chandrashekhara, K. (50%) and Flanigan, V. (50%), Missouri Soybean MerchandisingCouncil, Pultruded Composites Using Soybased Epoxy System, $25,000, January 1, 2001

December 31, 2001.


19/47

17

Chandrashekhara, K. , Dayco Products Center, Dynamic Analysis of V-Ribbed Belt System,$35,000, March 1, 2001 February 28, 2002.

Choi, J. , Visteon Corp., Evaluation of the Potential Laser Welding of Taping Operation,$2,600, March 1, 2001 May 31, 2001.

Dharani, L. , Manufacturing Research and Training Center, Fabrication and Characterization of Soybean Oil Based Resin Composites, $10,000, July 1, 2000 June 30, 2001, (awarded6/19/01).

Dharani, L. , Ford Motor Company, Modeling and Simulation of Automotive Glazing Under Side Impact and Rollover Conditions, $50,000, May 1, 2001 April 30, 2002.

Drallmeier, J. , Manufacturing Research and Training Center, Development of a MinimumCost EFI System, $4,098, July 1, 2000 June 30, 2001 (awarded 6/18/01).

Drallmeier, J. A. (50%), Flanigan, V. (25%) and Kapila, S. (25%), Missouri Soybean ResearchCouncil, Comparative Performance of Methyl Soyate and Mineral Oil Base Stocks for Two-Stroke Engine Lubricants, $15,000, April 1, 2001 March 31, 2002.

Eversman, W. , B. F. Goodrich Aerospace, Acoustic Optimization, $38,700, April 15, 2001 April 14, 2002.

Finaish, F. , NASA, Missouri Space Grant Consortium (Year 1), $212,500, March 1, 2001 February 28, 2002.

Kapila, S. (50%) and Flanigan, V. , (50%), U.S. Geological Survey, Development of an

Advanced Combustion Process for Disposal of Waste from Livestock Operations, $22,000,March 1, 2000 February 28, 2001.

Kapila, S. (50%), Flanigan, V . (25%), and Nam, P. (25%), Novus International, Determinationof Antioxidant Activity and Antioxidant Constituents from Natural and Synthetic Sources,$74,000, September 1, 2000 August 31, 2001.

Kapila, S. (40%), Flanigan, V. (40%), Nam, P. (20%), Environmental Protection Agency,Physiochemical Characterization and Biological Evaluation of Mineral and Biogenic OilObscurant Smokes, $201,814, February 7, 2001 February 1, 2003.

Flanigan, V. , Manufacturing Research and Training Center, Design, Fabrication, andEvaluation of a Pilot Scale Continuous Feed Soybean Processing System and Use of Novel,$12,500, July 1, 2000 June 30, 2001 (awarded 6/18/01).

Flanigan, V. (30%), Kapila, S. (30%), Chandrashekara, K. (20%), Drallmeier, J. (20%),Missouri Enterprise, Development of Soybean Derived Materials and Applications,$200,000, July 1, 2000 June 30, 2001 (awarded 3/20/01).


20/47

18

Flanigan, V. (45%), Kapila, S. (45%), and Chandrashekhara, K. (10%), U.S. Department of Agriculture, Development and Evaluation of Composite Materials and Technical Oils fromGenetically Engineered Crops, $266,005, September 1, 2001 August 31, 2002.

Flanigan, V. , Missouri Soybean Merchandising Council, Development of Biodegradable

Coatings to Enhance Soymeal Bypass in Rumens, $10,000, July 1, 2001 June 30, 2002.

Mitchell, O. R. (25%), Drewniak, J. (15%), Agarwal, S. (15%), Kapila, S. (15%), and Flanigan,V. (15%), U.S. Department of Army, Multidisciplinary Research in Mine Detection and

Neutralization Systems, $894,000, December 1, 1999 January 19, 2001.

Nanni, A. (20%), Murray, S. (40%), Flanigan, V. (20%), Mitchell, O.R. (20%), South CarolinaResearch Authority, Composite Manufacturing Technology Teaching Factory, $185,000,October 1, 2001 September 30, 2002.

Isaac, K. M. , Manufacturing Research and Training Center, Automotive Power Steering

Flowfield Simulation, $12,500, July 1, 2000 June 30, 2001.

Isaac, K. M. , Manufacturing Research and Training Center, Onboard Refueling Vapor Recovery, $31,000, July 1, 2000 June 30, 2001 (awarded 3/1/01).

Isaac, K. M. , Dayco Technical Center, Dayco Products, Inc., Vaporization of Gasoline inAutomotive Filler Pipe: UDF Model Development, $14,383, April 1, 2001 August 31,2001.

Isaac, K. M ., Dayco Technical Center, Fuel Filling Systems CFD, $15,371, June 1, 2001 May 31, 2002.

Isaac, K. M. , Dayco Technical Center, Experimental Investigation of Air Entrainment andVapor Emission During Automotive Refueling, $18,540, June 1, 2001 December 31,2001.

Isaac, K. M. , Ohio Aerospace Institute, Aerodynamic Analysis of Planetary Exploration UsingBiometrics, $31,232, August 1, 2001 April 30, 2002.

Krishnamurthy, K. , Raytheon Aircraft Company, Intelligent Selection of High-SpeedMachining Parameters-Phase II, $55,000, January 1, 2001 June 30, 2002.

Saygin, C. (25%), Grassman, S. (20%), Landers, R. G. (20%), Leu, M. C. (10%), McAdams,D. (20%), and Rapier, S. (5%), Eagle Pitcher, Electrode Counter Design for ThermalBatteries, $8,000, September 1, 2001 December 31, 2001.

Leu, M. (34%), Liou, F. (33%), McAdams, D. (33%), MetaStable Instruments, Inc., Designand Development of Refractive Devices for Directing Laser Beams, $30,000, June 1, 2001

May 31, 2002.


21/47

19

Leu, M. , Tel Med Technologies, Solid Freeform Fabrication Based Dental Reconstruction,$51,860, January 1, 2002 December 31, 2002.

Rao, V. (50%), Pottinger, H. (17%), Miller, B. (17%), Okafor, A. (16%), Universal TechnologyCorporation, Research to Enhance Aircraft Structural Integrity [Task 3], $601,666, June

14, 2001 November 9, 2002.

Riggins, D. , National Aeronautics and Space Administration, John H. Glenn Research Center,Second-Law Based Performance of Aerospace Turboshaft Engines and EngineComponents, $59,999, February 28, 2001 February 27, 2002.

Riggins, D. , National Aeronautics and Space Administration, High Speed Propulsion SystemModeling and Analysis, $60,001, June 1, 2001 May 31, 2002.

Roy, S. , National Aeronautics and Space Administration, Modeling of the Interaction BetweenPermeability and Damage in PMC Laminates for the NASA RLV, $81,286, April 5, 2001

April 4, 2004.

Roy, S. , U.S. Department of Transportation, Micro-Macro Modeling of the ExternalStrengthening of Concrete with Fiber Reinforced Polymer, $11,549, October 1, 2000 June 30, 2002 (awarded 6/14/01).

Roy, S. , National Aeronautics and Space Administration, Characterization of EnvironmentalDurability of a Polymer Matrix Composite, $31,731, February 1, 2001 January 31, 2002.

Roy, S. , University of Texas, Long Term Durability of Adhesively Bonded Joints, $4,600,January 16, 2000 September 30, 2000 (awarded 7/9/01).

Roy, S. , National Science Foundation, Micro-Macro Modeling of the External Strengthening of Concrete with Fiber Reinforced Polymer, $67,930, September 1, 2000 August 31, 2001.

Sauer, H. J. (50%), Nelson, H. F. (50%), AMEREN-UE, Coal Combustion Emissions,$20,000, September 1, 2001 August 30, 2002.

Sauer, H. J. Jr. (50%), Finaish, F. (50%), Ruskin, Flow Resistance and ModulatingCharacteristics of Control Dampers, $24,772, September 1, 2000 September 30, 2002.

Stutts, D. S. , Manufacturing Research and Training Center, Re-Implementation of I-ConduitSoftware Toolset, $25,000, July 1, 2000 June 30, 2001 (awarded 2/26/01).

Tsai, H. L. , Manufacturing Research and Training Center, Studies of Transport Phenomena andTheir Effect on Weld Quality in Laser Beam Welding, $25,000, July 1, 2000 June 30,2001 (awarded 3/16/01).


22/47

20

Tsai, H. L. , General Motors R&D Center, Integration and Validation of Gas Metal ArcWelding Models, $80,000, May 1, 2001 April 30, 2002.

Internal Research Grants:

Koylu, U. , UM Research Board, Laser Diagnostics of Flame-Synthesized Nanoparticles,$29,012, September 1, 2001 August 31, 2002.

Landers, R. , UM Research Board, Process Control of Laser Metal Deposition Manufacturing,$23,560, January 1, 2002 December 31, 2002.

Miller, B. A. , UM Research Board, Semi-Analytical Design of Noncontacting Gas Face Seals,$26,877, September 1, 2001 August 31, 2002.

Pernicka, H. , UM Research Board, Hands-On Satellite Design, Manufacture, and Operation,

$21,000, October 1, 2001 September 30, 2002.

Development and Equipment Grants:

Armaly, B. F. , U.S. Department of Energy, Extension of Intergovernmental PersonnelAssignment, $225,912, June 1, 2001 August 31, 2002.

Watkins, S.E. (20%), Belarbi, A. (20%), Chandrashekhara, K. (20%), Nanni, A. (20%), andHall, R. (20%), National Science Foundation, Advanced Materials for CivilInfrastructures: Multidisciplinary Curriculum Development, $150,384, January 1, 2001 -

December 31, 2001.

Landers, R. , UMR Manufacturing Engineering Education Program, Development of Internet-Accessible Manufacturing Courses, $12,000, January 1, 2001 December 31, 2001.

Leu, M. , Ford, FORD-UMR Partnership for Lean Thinking in Manufacturing, $36,979,August 20, 2001 December 31, 2001.

Leu, M. (20%), Liou, F. (10%), Krishnamurthy, K. (10%), Midha, A. (5%), Agarwal, S.(15%), Wunsch, D. (5%), Fu, Y. (5%), Liu, F. (5%), Allada, V. (5%), Mitchell, O. (10%),Hall, R. (5%), Kellogg, R. (5%), National Science Foundation, REU Supplement for MRIProject: Development of a Virtual and Augmented Reality System for Research inIntelligent Design and Manufacturing, $12,000, September 1, 2000 August 31, 2003(awarded 3/6/01) and Supplement, $6,000, September 1, 2001 August 31, 2003.

Leu, M. , Manufacturing Research and Training Center, Development of a Virtual andAugmented Reality System for Research in Intelligent Design and Manufacturing, $12,499,July 1, 2000 June 30, 2001 (awarded 6/15/01).


23/47

21

Leu, M. C. (30%), Choi, J. (10%), Liou, F. (10%), Landers, R. (10%), McAdams, D. (10%),

Midha, A. (10%), Tsai, H. L. (10%), and Okafor, A. (10%), U.S. Department of Education, Doctoral Research and Training in Virtual and Rapid Prototyping, $115,428,August 15, 2001 August 14, 2002.

Liou, F. , Manufacturing Research and Training Center, Development of a Five-Axis RapidMetal Forming System, $25,000, July 1, 2000 June 30, 2001 (awarded 3/27/01).

Liou, F. , National Science Foundation, Development of a Five-Axis Rapid Metal FormingSystem, $12,000, July 1, 2001 August 31, 2003.

Liou, F. (30%), Allada, V. (20%), Okafor, A. (15%), Leu, M. (20%), Mishra, R. (15%), SMEEducation Foundation, Development of A Product-Focused Manufacturing Program,$182,000, July 1, 2001 June 30, 2003.

Liou, F. , Allada, V., and Saygin, C., FORDUMR Partnership for Lean Thinking inManufacturing, $36,979, August 2001 July 2006.

Tsai, H. L. , Manufacturing Research and Training Center, Development of WeldingPerformance Data for MIG Aluminum Welding, $20,319, July 1, 2000 June 30, 2001(awarded 3/15/01).

Tsai, H. L. (30%), Choi, J. (10%), Landers, R. (10%), Leu, M. (10%), Midha, A. (10%),Rahaman, M. (10%), Van Aken, D. (10%), Story, J. (10%), National Science Foundation,MRI: Acquisition of a High-Power C02 Laser for Research and Education inManufacturing and Materials Processing, $200,000, September 1, 2001 February 28,

2003.

OTHER ACTIVE GRANTS:

External Research Grants:

Armaly, B. F. (90%) and Drallmeier, J. A. (10%), National Science Foundation, MixedConvection in Three Dimensional Separated Flow, $53,656, June 1, 2000 May 31,2001.

Crow, M. (20%), Anderson, A. (10%), Drewniak, J. (10%), Avula, X. (10%), Ercal, F. (10%),Pekarek, S. (10%), Liu, X. (10%), Wu, C. (10%), Eversman, W. (10%), NationalScience Foundation, IGERT Formal Proposal: Variable Speed Electromechanical DriveSystems, $1,698,626, January 1, 1999 December 31, 2003.

Balakrishnan, S. N. , National Science Foundation, Adaptive Critic Based Neurocontrol for Distributed Parameter Systems, $104,943, September 1, 2000 August 31, 2001.


24/47

22

Balakrishnan, S. N. (75%) and Tikku, A. (25%), U.S. Army Space and Missile, Integrated

Guidance and Estimation for Zero Miss Missiles, $30,000, September 21, 1999 September 20, 2002.

Birman, V. , Office of Naval Research, Theory of Naval Sandwich Structures with MultipleFacings, $40,637, March 15, 2000 March 14, 2001.

Chandrashekhara, K. , MRTC/Dayco Products, Dynamic Analysis of V-Ribbed Belt System,$35,000, March 1, 2000 August 28, 2001.

Belarbi, A. (25%), Chandrashekhara, K. (25%), Watkins, S. E. (25%), and Nanni, A. (25%),Missouri Department of Transportation, Structural Integrity Evaluation of RC ColumnsRetrofitted with FRP Wraps, $30,000, (plus $30,000 UTC match) February 15, 2000 April 30, 2001.

Drallmeier, J. A. (50%) and Flanigan, V. (50%), Kawasaki Motors Manufacturing Corporation,Development of a Standard LPG/CNG Engine Specification, $46,298, September 1,2000 August 30, 2002.

Drallmeier, J. A. (45%), Flanigan, V. (45%), and Riggins, D. (10%), Kawasaki MotorsManufacturing Corporation, Development of a Minimum Cost EFI System, $75,999,September 1, 2000 August 30, 2003.

Drallmeier, J. A. , Ford Motor Company, Analysis of Film Atomization from Valve and PortSurfaces, $20,000, July 1, 2000 June 30, 2001.

Eversman, W. , NASA, Studies in Acoustic Propagation and Radiation, $75,381, February 1,2000 January 31, 2001.

Pekarek, S. D. (50%), and Eversman, W. (50%), Delphi Delco, Magnetic Noise Generation inSynchronous Machine/Converter Systems, $118,090, June 1, 2000 May 31, 2001.

Flanigan, V. J. (34%), Chandrashekhara, K. (33%), and Murray, S. (33%), EnvironmentalImprovement and Energy Resources Authority (EIERA), Composite Structures UsingAsphalt Based Roofing Scrap Materials, $159,000 (plus $17,000 UTC match), June 30,2000 June 30, 2002.

Flanigan, V. J. (50%) and Kapila, S. (50%), U.S. Army, Development and Evaluation of Biogenic Obscurants, Robotic Obscurant Projectors, and Obscurant Simulation Models,$838,455, May 31, 2000 June 25, 2001.


25/47

23

Flanigan, V. (100%) and Kapila, S., United Soybean Board, Design, Fabrication, andEvaluation of a Pilot Scale Continuous Feed Soybean Processing System and Use of

Novel Solvents for Tailored Soybean Oil Extraction, $136,346, July 1, 1999 June 30,2001.

Kapila, S. (60%) and Flanigan, V. (40%), Missouri Soybean Merchandising Council,Development of Low-Cost Moderate Strength Composite Materials Utilizing Soyoil,$12,293, July 10, 2000 June 30, 2001.

Kapila, S. (50%) and Flanigan, V. (50%), Missouri Soybean Merchandising Council, AnAssessment of High Oleic Soy Oil Esters as Technical Fluids: Insulating and LubricatingOils, $18,000, July 1, 2000 June 30, 2002.

Kapila, S. (50%), Flanigan, V. (25%), and Nam, P. (25%), Missouri Soybean MerchandisingCouncil, A Process for Selective Extraction of Tocopherols, Iso-Flavons and Sterolsfrom Soy Flakes, $20,000, July 1, 2000 June 30, 2001.

Isaac, K. M. , Dayco Products, Inc., Automotive Power Steering Flowfield Simulation,$28,102, April 1, 2000 August 31, 2001.

Isaac, K. M. , Dayco Products Inc., Experimental Investigation of Air Entrainment and Vapor Emission during Automotive Refueling, $28,740, June 1, 2000 May 31, 2001.

Isaac, K. M. , Dayco Products Inc., Investigation of Quantitative Vapor Emission duringAutomotive Refueling Using Optical Techniques, $8,880, August 3, 2000 August 31,2001.

Koylu, U. O. , National Science Foundation, CAREER: Formation and Evolution of SootParticles during Turbulent Nonpremixed Combustion, $207,282, July 1, 2000 March31, 2003.

Koylu, U. O. , National Science Foundation, Soot Properties in Steady and Unsteady Nonpremixed Counterflow Flames, $19,873, August 15, 2000 August 31, 2001.

Liou, F. W. , National Science Foundation, Precision Rapid Metal Forming, $10,000, July 1,2000 June 30, 2001.

Midha, A . (90%) and Dharani, L. R. (10%), ABB Ricerca SpA, A Feasibility Study of Application of a Compliant Mechanisms Technology to a Miniature Circuit Breaker,$70,000, June 1, 2000 March 31, 2001.

Rao, V. (25%), Pottinger, H. (15%), Schonberg, W. (10%), Okafor, A. (20%),Chandrashekhara, K . (15%), and Birman, V. (15%), Universal TechnologyCorporation, Structural Monitoring of Aircraft, $641,600, July 17, 2000 December 31, 2001.


26/47

24

Roy, S. (90%) and Nanni, A. (10%), National Science Foundation, Micro-Macro Modeling of the External Strengthening of Concrete with Fiber Reinforced Polymer, $200,000,September 1, 2000 August 31, 2003.

Roy, S. (90%) and Dharani, L. R. (10%), NASA, Characterization of Environmental

Durability of a Polymer Matrix Composite, $33,913, February 7, 2000 February 6,2001.

Nanni, A. (50%), Myers, J. (23%), Roy, S. (6%), Chandrashekhara, K. (3%), Maerz, N. (6%),Galecki, G. (6%), Watkins, S. (3%), and Belarbi, A. (3%), U.S. Department of Transportation, Construction Specifications and Inspection Process for FRPRepair/Strengthening of Concrete Structures, $600,000, May 16, 2000 May 15, 2002.

Sauer, H. J. Jr., (50%) and Finaish, F. (50%), Ruskin, Flow Resistance and ModulatingCharacteristics of Control Dampers, $24,772, September 1, 2000 September 30, 2002.

Selberg, B. P ., National Aeronautics and Space Administration, Missouri Space GrantConsortium (Year 10), $212,500, March 1, 2000 February 28, 2001.

Stutts, D. S. , DuPuy Orthopedics, Inc., Development of an Ultrasonic Bone Saw for Application in Orthopedic Surgery, $154,336, June 1, 2000 December 31, 2001.

Stutts, D. S. (50%) and Wilkerson, R. (50%), Centcom, Inc., Re-Implementation of II-ConduitSoftware Toolset, $33,105, August 14, 2000 July 31, 2001.

Tsai, H. L. , General Motors Corporation, Modeling the Transport Phenomena in Gas Metal ArcWelding of Aluminum Alloys, $60,000, May 1, 2000 April 30, 2001 (plus MRTC

match, $25,000, May 1, 2000 April 30, 2001).

Tsai, H. L. , U.S. Department of the Army, Studies of Transport Phenomena and Their Effect onWeld Quality in Laser Beam Welding, $48,803, extended through March 31, 2001.

Internal Research Grants:

Balakrishnan, S. N. , UM Research Board, Control of Nonlinear Systems with SDRE,$32,252, January 1, 2001 June 30, 2002.

Choi, J. , UM Research Board, Laser Aided Direct Metal Deposition Process, $34,834 (plus$8,500 UMR Matching), September 1, 2000 September 1, 2001.

Dharani, L. R. , UM Research Board, Impact of Soft Large Missiles on Laminated Glass,$35,000, February 1, 2001 January 31, 2002.


27/47

25

Leu, M. C. , UM Research Board, Rapid Freeform Fabrication of Ice Parts, $25,367, June 1,2000 May 31, 2001.

McAdams, D. A. , UM Research Board, A Theory for Engineering Design ModelConstruction, $28,551, January 1, 2001 December 31, 2002.

Development and Equipment Grants:

Armaly, B. F. , U.S. Department of Energy, Intergovernmental Personnel Assignment withDOE-Basic Energy Sciences, Engineering Research Program, $465,750, June 1, 1999 May 31, 2001.

Watkins, S. E. (20%), Belarbi, A. (20%), Chandrashekhara, K. (20%), Nanni, A. (20%), Hall,R. (20%), National Science Foundation, Advanced Materials for Civil Infrastructures:Multidisciplineary Curriculum Development, $400,000 (plus $149,229 UMR match),

January 1, 1999 December 31, 2001.

Rao, V. (60%) and Krishnamurthy, K. (40%), National Science Foundation, ResearchExperience for Undergraduate Students in Mechatronics and Smart Structures, $73,659,April 1, 2000 March 31, 2005.

Landers, R ., UMR Manufacturing Engineering Education Program, Development of Internet-Accessible Manufacturing Courses, $5000, January 1, 2001 December 31, 2001.

Leu, M. C. (20%), Agarwal, S. (15%), Fu, Y. (5%), Allada, V. (5%), Hall, R. (5%), Kellogg, R.(5%), Liou, F. (10%), Midha, A. (5%), Wunsch, D. (5%), Krishnamurthy, K. (10%),

Liu, F. (5%), and Mitchell, O. R. (10%), National Science Foundation, Development of a Virtual and Augmented Reality System for Research in Intelligent Design andManufacturing, $431,401, September 1, 2000 August 31, 2003 (plus MRTC match,$75,000, September 1, 2000 August 31, 2003).

Liou, F. (22%), Krishnamurthy, K. (13%), Lu, W. (13%), Tsai, H. L. (13%) et al., NationalScience Foundation, Development of a Five-Axis Rapid Metal Forming System,

National Science Foundation, $378,096/$167,750, September 1, 1998 August 31, 2003.

Okafor, A. C. (70%) and Leu, M. C. (30%), (equipment grant), Society of ManufacturingEngineers, SME Education Foundation Manufacturing Engineering ProgramDevelopment, $94,000, June 1, 2000 May 31, 2001.

Rao, V. (40%), Cheng, F. (15%), Kellogg, R. (15%), Keyvan, S. (15%), Okafor, A. (15%), National Science Foundation, Multidisciplinary Research and Modular CoursewareDevelopment in Infrastructural Health Monitoring Systems, $375,000, September 15,1998 September 14, 2001.


28/47

26

Mishra, R. (50%), Tsai, H. L. (25%), and Van Aken, D. (25%), National Science Foundation,Acquisition of a Friction Stir Welding Equipment for Metal Joining Research andEducation, $94,750, June 1, 2000 May 31, 2001.


29/47

27

SCHOLARLY ACTIVITIES

Journal Publications:

Abu-Mulaweh, H. I., Armaly, B.F. , and Chen, T.S. , Turbulent Mixed Convection Flow over aBackward-Facing Step, International Journal of Heat and Mass Transfer, Vol.44, pp.2661-2669,2001.

Padhi, R., Balakrishnan, S. N. , Randolph, T., Adaptive-Critic Based Optimal Neuro ControlSynthesis for Distributed Parameter Systems, Automatica, Vol. 37, pp. 1223-1234, 2001.

Birman, V. and Simitses, G. J., Vibrations of Sandwich Panels and Beams with Matrix Cracksin the Facings, Composites Science and Technology, Vol. 61, pp. 1605-1613, 2001.

Birman, V. and Byrd, L. W., Selected Issues of Mechanics of Ceramic Matrix Composites,

Composite Structures, Vol. 51, pp. 181-190, 2001.

Birman, V. , Transverse Matrix Cracking in a Sandwich Beam with Cross-Ply Facings Subjectto a Uniform Pressure, Mechanics Research Communications, Vol. 28, pp. 187-192, 2001.

Birman, V. and Byrd, L. W., Matrix Cracking in Transverse Layers of Cross-Ply BeamsSubjected to Bending and its Effect on Vibration Frequencies, Composites: Part B, Vol. 32,

pp. 47-55, 2001.

Birman, V. and Byrd, L. W., Natural Frequencies of Cross-Ply Laminated Panels with MatrixCracks, AIAA Journal, Vol. 39, No. 1: Technical Notes, pp. 190-193, 2000 (not previously

reported).

Valoor, M. T., Chandrashekhara, K. and Agarwal, S., Self-Adaptive Vibration Control of Smart Composite Beams Using Recurrent Neural Architecture, International Journal of Solids and Structures, Vol. 38, No. 44-45, pp. 7857-7874, 2001.

Belarbi, A., Watkins, S. E., Chandrashekhara, K. , Corra, J., and Konz, B., Smart Fiber-Reinforced Polymer Rods Featuring Improved Ductility and Health MonitoringCapabilities, Smart Materials and Structures An Institute of Physics Journal, Vol. 10, pp.427-431, 2001.

Shen, Y., Chandrashekhara, K. , and Agarwal, S., Recurrent Neural Networks for RobustVibration Control of Composite Shells, International Journal of Smart Engineering SystemDesign, Vol. 3, pp. 175-185, 2001.

Chen, T. S. , Turbulent Mixed Convection Flow over a Backward-Facing Step, InternationalJournal of Heat and Mass Transfer, Vol. 44, pp. 2661-2669, July 2001.


30/47

28

Wagner, R. M. and Drallmeier, J. A. , An Approach for Determining Confidence Intervals for

Common Spray Statistics, Atomization and Sprays, Vol. 11, No. 3, 2001.

Rienstra, S. W. and Eversman, W. , A Numerical Comparison Between the Multiple-Scales and

Finite-Element Solution for Sound Propagation in Lined Flow Ducts, J. Fluid Mech., Vol.437, pp. 367-384, 2001.

Eversman, W. , The Boundary Condition at an Impedance Wall in a Non-Uniform Duct withPotential Mean Flow, Journal of Sound and Vibration, Vol. 246(1), pp. 63-69, 2001.

Eversman, W. , A Reverse Flow Theorem and Acoustic Reciprocity in Compressible PotentialFlows in Ducts, Journal of Sound and Vibration, Vol. 246(1), pp. 71-95, 2001.

Eversman, W. , Numerical Experiments on Acoustic Reciprocity in Compressible PotentialFlows in Ducts, Journal of Sound and Vibration, Vol. 246(1), pp. 97-113, 2001.

Nam, P., Kapila, S., Liu, Q., Tumiatti, W., Porciani, A., and Flanigan, V. , Solvent Extractionand Tandem Dechlorination for Decontamination of Soil, Chemosphere, Vol. 43, pp. 485-491, 2001.

Gehrke, M., Kapila, S., Nam, P., and Flanigan, V. , A High Efficiency All Glass Sampling andConcentration Device for Adsorptive Semivolatile Organics, Chemosphere, Vol. 43, pp.479-483, 2001.

Liske, Y., Kapila, S., Flanigan, V. , Nam, P., and Lorbert, S., Evaluation of CombustionProcesses for Production of Feedstock Chemicals from Ammonium Sulfate and Ammonium

Bisulfate, J. Hazardous Subs Research, (ISSN 1090-7025), Vol. 2, pp. 8-11, 2001.

Isaac, K. M. , Spray Evolution of a Coflowing Round Liquid Jet in High Speed Air Flow,Atomization and Sprays, Vol. 11, No. 4, pp. 305-316, July-August 2001.

Brasil, A. M., Farias, T. L., Carvalho, M. G., and Koylu, U. O. , Numerical Characterization of the Morphology of Aggregated Particles, Journal of Aerosol Science, Vol. 32, pp. 489-508,2001.

Landers, R. G. and Ulsoy, A. G., Supervisory Control of a Face Milling Operation in DifferentManufacturing Environments, Transactions on Control, Automation and SystemsEngineering, Vol. 3, No. 1, pp. 1-9, March 2001.

Landers, R. G. , Min, B.-K., and Koren, Y., Reconfigurable Machine Tools, Annals of theCIRP, Vol. 50/1, pp. 269-274, 2001.

Srikanth, K., Liou, F. W., and Balakrishnan, S. N. , An Integrated Approach for AssemblyTolerance Analysis, Intl. Journal of Production Res., Vol. 39, No. 7, pp. 1517-1535, 2001.


31/47

29

Ma, N. and Walker, J. S., Inertia and Thermal Convection During Crystal Growth with a SteadyMagnetic Field, AIAA Journal of Thermophysics and Heat Transfer, Vol. 15, No. 1, pp. 50-54, 2001.

Ma, N. , Walker, J. S., Ludge, A., and Riemann, H., Combining a Rotating Magnetic Field and

Crystal Rotation in the Floating Zone Process with a Needle Eye Induction Coil, Journal of Crystal Growth, Vol. 230, pp. 118-124, 2001.

Morton, J. L., Ma, N. , Bliss, D. F., and Bryant, G. G., Diffusion-Controlled Dopant TransportDuring Magnetically-Stabilized Liquid-Encapsulated Czochralski Growth of CompoundSemiconductor Crystals, ASME Journal of Fluids Engineering, Vol. 123, No. 4, pp. 893-898, December 2001.

Miller, B. A. and Green, I., Numerical Formulation for the Dynamic Analysis of Spiral-Grooved Gas Face Seals, Journal of Tribology, Vol. 123, pp. 395-403, April 2001.

Nelson, H. F. , Roll Effects on Carryover for Hypersonic Delta Fin Missiles, Journal of Spacecraft and Rockets, Vol. 38, No. 1, January-February 2001.

Nelson, H. F. , Sauer, H. J., Jr., and Huang, X., High Temperature Properties of Moist Air,ASHRAE Transactions, Vol. 107, pt. 2, pp. 780-791, June 2001.

Meyer, B. M., Nelson, H. F. , and Riggins, D. W. , Hypersonic Drag and Heat Transfer Reduction Using a Forward Facing Jet, AIAA Journal of Aircraft, Vol. 38, No. 4, pp. 680-687, 2001.

Okafor, A. C. , Otieno, A. W., Dutta, A., Rao, V. S., Detection and Characterization of High-

Velocity Impact Damage in Advanced Composite Plates Using Multi-Sensing Techniques,Composite Structures, Vol. 54, pp. 289-297, 2001.

Okafor, A. C. and Dutta, A., Determination of Optimal Ultrasonic Pulse Repetition RateFrequency for Damage Detection in Composites and Aluminum Plates Using Neural

Networks, Nondestructive Testing and Evaluation International Journal, Vol. 34/7, pp. 469-481, July, 2001.

Enumuoh, E. Ugo, El-Gizawy, A. S., Okafor, A. C. , An Approach for Development of Damage-Free Drilling of Carbon Fiber Reinforced Thermosets, International Journal of Machine Tools & Manufacture, Vol. 41, pp. 1795-1814, 2001.

Coyle, D. J. and Pernicka, H. J. , Orbit Determination at a Single Ground Station Using RangeRate Data, The Journal of the Astronautical Sciences, Vol. 49, No. 2, April-June 2001.

Sauer, H. J. Jr. , Nelson, H. F. , and Huang, X., The Search for High-Temperature Experi-mental Psychrometric Data, ASHRAE Transactions, Vol. 107, pt. 2, pp. 768-779, June2001.


32/47

30

Fan, H. G., Tsai, H. L. , Na, S. J., Heat Transfer and Fluid Flow in a Partially or Fully

Penetrated Weld Pool in Gas Tungsten Arc Welding, International Journal of Heat andMass Transfer, Vol. 44, pp. 417-428, 2001.

Wang, Y., Shi, Q ., Tsai, H. L. , Modeling of the Effects of Surface Active Elements on FlowPatterns and Weld Penetration, Metal. Mater. Trans., Vol. 32B, pp. 145-161, February 2001.

Zhao, J.Z. and Chen, T.S. , Inertia Effects on Non-Parallel Thermal Instability of NaturalConvection Flow over Horizontal and Inclined Plates in Porous Media, International Journal of Heat and Mass Transfer, Vol.45,pp.2265-2276, 2002.

Zhao, J.Z. and Chen, T.S. , Non-Darcy Effects on Non-Parallel Thermal Instability of NaturalConvection Flow over a Horizontal Plate Embedded in Porous Media, International Journal of Heat and Mass Transfer, (March 2002).

Published Refereed Presentations:

Abu-Mulaweh, H. I., Chen, T. S. , and Armaly, B. F. , Turbulent Mixed Convection Flow over a Backward-Facing Step The Effect of the Step Heights, 35 th National Heat Transfer Conference , Paper No. NHTC 2001-20214, Anaheim, CA, June 10-12, 2001.

Padhi, R. and Balakrishnan, S. N. , A Neural Network Based Optimal Control of ProcessControl, Proceedings of the 2001 American Control Conference, Arlington, VA, June 2001.

Liu, X. and Balakrishnan, S. N. , Adaptive Critic Based Neuroobservers, Proceedings of the

2001 American Control Conference , Arlington, VA, June 2001.

Xin, M. and Balakrishnan, S. N. , Robust Missile Guidance with Neural Networks, Proceedings of the American Control Conference, Arlington, VA, June 2001.

Padhi, R. and Balakrishnan, S. N. , Optimal Control of One-Dimensional Wave Equation Using Neural Networks, Proceedings of the 2001 IJCNN Conference, Washington, D.C., July2001.

Padhi, R. and Balakrishnan, S. N. , An Optimal Control Based Treatment Strategy For Parturient Paresis Using Neural Networks, Proceedings of the 2001 IEEE Conference onControl Applications, Mexico City, Mexico, September 2001.

Xin, M. and Balakrishnan, S. N. , Robust State Dependent Riccati Equation Based RobotManipulator Control, Proceedings of the 2001 IEEE Conference on Control Applications,Mexico City, Mexico, September 2001.


33/47

31

Esteban, S. and Balakrishnan, S. N. , Nonlinear Flight Control with Neural Networks, Proceedings of the AIAA Atmospheric Flight Mechanics Conference, Montreal, Canada,August 2001.

Huang, Z. and Balakrishnan, S. N. , Robust Adaptive Critic Based Neuro Controllers for

Helicopters with Unmodeled Uncertainties, Proceedings of the AIAA Atmospheric Flight Mechanics Conference, Montreal, Canada, August 2001.

Huang, Z. and Balakrishnan, S. N. , Robust Adaptive Critic Based Neuro Controllers for Missiles with Unmodeled Dynamics, Proceedings of the AIAA Guidance, Navigation and Control Conference , Montreal, Canada, August 2001.

Birman, V. and Byrd, L. W., Damping in Unidirectional and Cross-Ply Ceramic MatrixComposites with Matrix Cracks, Proceedings of the 2001 ASME International Mechanical

Engineering Congress and Exposition , ASME Press, New York, New York, Paper IMECE2001/AD-23775, November 2001.

Birman, V. and Byrd, L. W., On the Prediction of Damping in Composite and SandwichStructures, Proceedings of the 2001 ASME International Mechanical Engineering Congressand Exposition, ASME Press, New York, New York, Paper IMECE2001/AMD-25409,

November 2001.

Birman, V. and Byrd, L. W., Vibrations of Cross-Ply Ceramic Matrix Composite Beam withMatrix Cracks in Longitudinal and Transverse Layers, Advances in Fracture Research,

Proceedings of ICF 10 (International Congress on Fracture 10), Eds. K. Ravi-Chandar et al.,Paper ICF100524OR, Elsevier, 2001.

Xu, M., Castle, J., Shen, Y., Chandrashekhara, K. , Breig, W. F., and Oliver, L. R.,Experimental Measurements of V-Ribbed Belt Tracking Lateral Forces, SAE World Congress , SAE Paper 2001-01-0661, Detroit, MI, March 5-8, 2001.

Watkins, S. E., Unser, J. F., Nanni, A., Chandrashekhara, K., and Belarbi, A., Implementationand Manufacture of a Smart Composite Bridge for Short-Span Applications, in SmartSystems for Bridges, Structures, and Highways, (edited by S. C. Liu), Proceedings of theSPIE North American Conference on Smart Structures and Materials , Newport Beach, CA,Vol. 4330, pp. 148-157, March 6-9, 2001.

Shen, Y., Saikrishna, S., Birman, V. , Chandrashekhara, K., and Rao, V. S., Optimization of Bonded Composite Patches Used in Repair of Aerospace Structures, Proceedings of the 3 rd Workshop on Structural Health Monitoring , Stanford, CA, pp. 10, September 12-14, 2001.

Zhu, J., Castle, J., Berring, N., Chandrashekhara, K. , Flanigan, V., and Kapila, S.,Mechanical Characterization of Soy-based Pultruded Composites, Proceedings of the CFAComposites Conference, Paper No. M-203, pp. 1-8, Tampa, FL, October 3-6, 2001.


34/47

32

Chen, T.S. and Zhao, J.Z., Non-Parallel Thermal Instability of Natural Convection Flow Over Horizontal Plates in Porous Media with Inertia Effects, International Conference onComputational Heat and Mass Transfer, Paper No. TU3-P4, Rio de Janeido, Brazil,October 22-26, 2001.

Chen, T.S. and Zhao, J.Z., Non-Parallel Thermal Instability of Natural Convection Flow onInclined Plates in Porous Media, 2001 International Conference on Computational Engineeringand Science, Paper No. 127, Puerto Vallarta, Mexico, August 19-24, 2001.

Choi, J. and Hua, J., Adaptive Laser Aided DMD Process Control, Paper No. 1205, Proceedings of ICALEO 2001 , Jacksonville, FL, October 14-18, 2001.

Choi, J. and Mazumder, J., Rapid Manufacturing by Laser Aided Direct Metal DepositionProcess: Issues and Examples, DETC2001/DAC-21043, 2001 ASME Design AutomationConference, Pittsburgh, PA, September 9-12, 2001.

Sundaram, R. and Choi, J. , A Slicing Procedure for 5-axis Layered Manufacturing, pp. 408-415, Proceedings of the 12 th Solid Freeform Fabrication Symposium , Austin, Texas, August6-8, 2001.

Hambacker, K., Kapila, S., Nam, P., Gehrke, M., and Flanigan, V. , Society of Photo-Optical Instrumentation Engineers (SPIE) Proceedings , 4393, pp. 899-911, 2001.

Kapila, S., Seemamahannop, R., Nam, P., Flanigan, V. , and Tumiatti, W., Oil, PCBs and POPs:Concerns, Regulations and Solutions, Proceedings of the Oil PCB POPs Forum 2001 , 10,

pp. 20-28, 2001.

Homan, K. , Approximate Analytical Solutions for the Transient Temperature Profiles inStratified Liquid Sensible Storage, Proceedings of the 2001 National Heat Transfer Conference, ASME, 2001.

Homan, K. , Thermodynamic Optimization of System Configuration for Electric Water Heatingwith Storage: Fully-Mixed Store, Proceedings of the ASME Advanced Energy Systems

Division, ASME, 2001.

Banerjee, R., Isaac, K. M. , Oliver, L., and Breig, W., A Numerical Study of Automotive GasTank Filler Pipe Two-Phase Flow, SAE Paper 2001-01-0732, SAE 2001 World Congress,March 2001.

Sampaz, H. S. and Koylu, U. O. , Soot Particle Sizing in Flames Using a Two-Angle ScatteringTechnique, Proceedings of the Second Joint Meeting of the U.S. Sections of the Combustion

Institute, Paper No. 126, Oakland, CA, March 25-28, 2001.


35/47

33

Steinhour III, W. and Krishnamurthy, K. , A Game-Theoretic Approach to Integrated ProductDesign, ASME Design Automation Conference, DETC2001/DAC-21086, pp. 1-8,September 2001.

Krishnamurthy, K. and Yan, L., Selection of Optimal Machining Parameters Using a Genetic

Algorithm, Proceedings of the ASME Dynamic Systems and Control Division, Int. Mechanical Engineering Congress and Exposition , IMECE2001/DSC-24513, pp. 1-7, November 2001.

Kim, S. I., Landers, R. G. , and Ulsoy, A. G., Robust Machining Force Control with ProcessCompensation, Proceedings of the ASME International Mechanical Engineering Congressand Exposition, Paper DSC-24585, Vol. 2, New York, NY, November 11-17, 2001 (on CDROM).

Moon, S-K., Moon, Y-M., Kota, S., and Landers, R. G. , Screw Theory Based Metrology for Design and Error Compensation of Machine Tools, ASME/DETC Computers and

Information in Engineering Conference , Paper DAC21083, Pittsburgh, PA, September 2001,(on CD ROM).

Boddu, M. R., Musti, S., Landers, R. G. , Agarwal, S., and Liou, F. W. , Empirical Modelingand Vision Based Control for the Laser Metal Deposition Process, Proceedings of theTwelfth Annual Solid Freeform Fabrication Symposium , pp. 452-459, Austin, TX, August 6-8, 2001.

Boddu, M. R., Landers, R. G., and Liou, F. W. , Control of Laser Cladding Processes for Rapid PrototypingA Review, Proceedings of the Twelfth Annual Solid Freeform

Fabrication Symposium, pp. 460-467, Austin, TX, August 6-8, 2001.

Landers, R. G. and Min, B.-K., Development of a Prototype Reconfigurable Machine Tool, Proceedings of the CIRP 1 st -International Conference on Reconfigurable Manufacturing, (onCD ROM), Ann Arbor, MI, May 21-22, 2001.

Zhang, J. and Liou, F. W. , Precision Solid Freeform Fabrication using Laser AidedManufacturing Processes (LAMP), Proceedings of the 2001 NSF Design and

Manufacturing Grantees Conference , MPM-56, pp. 1-8, 2001.

Zhang, J. and Liou, F. W. , Adaptive Slicing for a Five-Axis Laser Aided ManufacturingProcess, Proceedings of the 2001 ASME Design Automation Conference , Pittsburgh, PA,Paper No. DAC-21157, September 9-12, 2001.

Ruan, J. Z., Zhang, J., and Liou, F. W. , Support Structures Extraction for Hybrid LayeredManufacturing, Proceedings of the 2001 ASME Design Automation Conference, Paper No.DAC-21098, Pittsburgh, PA, September 9-12, 2001.


36/47

34

Eiamsa-ard, K., Zhang, J., and Liou, F. W. , Skeleton-Based Geometry Decomposition for Adaptive Slicing in a Five-Axis Laser Aided Manufacturing Process System, Proceedingsof the Twelfth Annual Solid Freeform Fabrication Symposium , Austin, TX, August 6-8,2001.

Laeng, J. aka Jamaluddin Abdullah, and Liou, F. W. , Design and Integration of a Laser MetalForming System, Proceedings of the Twelfth Annual Solid Freeform FabricationSymposium , Austin, TX, August 6-8, 2001.

Liou, F. , Choi, J. , Landers, R. G. , Janardhan, V., Balakrishnan, S. N. , and Agarwal, S.,Research and Development of a Hybrid Rapid Manufacturing Process, pp. 138-145,

Proceedings of the 12 th Annual Solid Freeform Fabrication Symposium , Austin, Texas,August 6-8, 2001.

Radhakrishnan, R. and McAdams, D. A. , A Framework for Sufficiency Estimation of Engineering Design Models,'' Proceedings of the 2001 ASME Design Theory and

Methodology Conference , 2001-DETC/DTM30, Pittsburgh, PA, 2001.

Bryant, C. R., Kurfman, M. A., Stone, R. B., and McAdams, D. A. , Creating EquationHandbooks to Model Design Performance Parameters, International Conference on

Engineering Design ICED 1 Glasgow , pp. 501-508, August 21-23, 2001.

Hirtz, J., Stone, R., McAdams, D. , Szykman, S., and Wood, K., Evolving a Functional Basisfor Engineering Design, Proceedings of the 2001 ASME Design Theory and MethodologyConference , 2001-DETC/DTM-21688, Pittsburgh, PA, 2001.

Nelson, H. F. , Bigas, J. D., and Sauer, H. J., Jr. , Adiabatic Flame Temperature for Coal

Combustion, Proceedings of the 26 th

International Technical Conference on Coal Utilization and Fuel Systems, pp. 631-641, Clearwater, FL, March 5-8, 2001.

Sauer, H. J., Jr. , George, R., and Finaish, F. , Mixing Characteristics of VAV SystemDampers, CLIMA 2000, Naples, Italy, September 2001.

Contributions to Books and Books Published:

Byrd, L. W. and Birman, V. , Nondestructive Testing of Thin-Walled Ceramic MatrixComposites with Matrix Cracks Using Thermography, Advances in the Mechanics of Platesand Shells , pp. 103-118, D. Durban, et al. (eds.), Kluwer Academic Publishers, 2001.

Birman, V. and Simitses, G. J., Stability of Short Sandwich Cylindrical Shells with Rib-Reinforced Facings, Recent Advances in Applied Mechanics, Honorary Volume for

Professor A. N. Kounadis , Eds. J. T. Katsikadelis, D. E. Beskos and E. E. Gdoutos, Editors, National Technical University of Athens, Athens, Greece, pp. 11-21, 2001.


37/47

35

Hall, R. H., Watkins, S. E., Davis, R., Belarbi, A., and Chandrashekhara, K ., Design andAssessment of Web-based Learning Environments, L. R. Vandervert and L. V. Shavininaand R. A. Cornell (Eds.), Cybereducation: The Future for Long Distance Learning, MaryAnn Liebert Publishers, NY, 2001.

Sauer, H. J., Jr. , Howell, R. H., and Coad, W. J., Principles of Heating, Ventilating and Air Conditioning , 4 th Ed., ASHRAE, Atlanta, GA, 2001.

Published Reviews and Abstracts:

Koylu, U. O. and Sapmaz, H. S., Optical Experiments in Luminous Flames and Implications onSoot Refractive Index, The Third International Symposium on Radiative Transfer, Antalya,Turkey, June 17-21, 2001.

Technical Reports:

Armaly, B. F. , Okafor, A. C. , Krishnamurthy, K. , Liou, F., and Lu, W. , Graduate ResearchTraineeship in Machine Tool Research, Annual Progress Report, National ScienceFoundation, April 2001.

Armaly, B. F. and Drallmeier, J. A. , Convection in 3-D Separated Flow, Annual ProgressReport, National Science Foundation, April 2001.

Armaly, B. F. , Acquisition of Three-Component Laser-Doppler Velocimeter, Annual ProgressReport, National Science Foundation, May 2001.

Chandrashekhara, K. and Flanigan, V. , Pultruded Composites Using Soy-based EpoxySystem, Missouri Soybean Merchandising Council, Final Report, December 2001.

Sandoval, J. E., Landers, R. G. , and Ulsoy, A. G., Reconfigurable CNC Lathe SimulationSystem, ERC/RMS Technical Report, University of Michigan, Ann Arbor, MI, 2001.

Johnikin, V. P., Min, B.-K., Landers, R. G. , and Ulsoy, A. G., Comprehensive, Modular Machine Tool Servomechanism Simulation, ERC/RMS Technical Report, University of Michigan, Ann Arbor, MI, 2001.

Nelson, H. F. , Sauer, H. J., Jr., and Huang, Xianghong, Formulation for the ThermodynamicProperties of Moist Air at High Temperatures, Final Report, ASHRAE Research Project1060, submitted to ASHRAE, Atlanta, GA, February 2001.

Sauer, H. J. , Control Characteristics of Airflow Dampers, UM Research Board Final Report,July 31, 2001.


38/47

36

THESES AND DISSERTATIONS

M.S. Theses:

Chandrashekhara, K. (James Castle, MSME), Fiber Reinforced Composites Using RecycledPolystyrene Foam and Natural Fibers, October 2001.

Choi, J. (Rames Sundaram, MSME), A Slicing Process for 5-Axis Layered Manufacturing,August 2001.

Drallmeier, J. A. (Galen Wilkinson, MSME), Investigation of Liquid Fuel Atomization Fromthe Intake Valve of a Port Fuel Injected Engine, May 2001.

Drallmeier, J. A. (Guang Xu, MSME), Simulation of the Pulverized Coal Combustion and Nox Emissions in a Rotary Kiln, May 2001.

Finaish, F. (Keith Gray, MSAE), Computational Study of Unsteady Separated flow FieldsSurrounding A Flapping Airfoil and their Relevance to Micro Air Vehicles, December 2001.

Finaish, F. (Milind Mainkar, MSME), Thermal and Gaseous Mixing Characteristics of ParallelBlade Dampers, December 2001.

Flanigan, V. (Jingsong Zhu, MSME), Thermal Analysis of a Mine Buried in Sand, December 2001.

Flanigan, V. (Xing Li, MSME), Simulation of ABS Incineration Under Oxidative andReductive Conditions, June 2001.

Isaac, K. M. (Harith Vadari, MSME), Investigation of the Effect of Airfoil Roughness for StallControl, June 2001.

Isaac, K. M. (David Pugh, MSME), Experimental Investigation of Automotive RefuelingSystem Behavior and Development of Boundary Conditions for Computer Simulation,December 2001.

Krishnamurthy, K. (R. Karmi, MSME), An Open-Loop Model of a Typical Aircraft BrakeSystem for Assessing Deceleration Onset Characteristics, 2001.

Liou, F. W. (Bala Nagendra Raja Munjuluri, MSME), Process Modeling, Monitoring andControl of Laser Metal Forming, January 2001.

McAdams, D. (Karthik Lakashminarayanan Sivaramakrishnan, MSME), Functional HierarchyBased Approach to Enhance Modularity and Optimize Life Cycle Aspects, 2001.


39/47

37

McAdams, D. (Balaji Chandrasekaran, MSME), An Inductive Approach to Product Design

Based on Modular Product Architecture, 2001.

McAdams, D. (Bryan Ezekiel Strawbridge, MSME), An Empirical Study on Design for

Quality, 2001.

McAdams, D. (Rajesh Radhakrishnan, MSME), A Framework for Sufficiency Estimation of Engineering Design Models, 2001.

McAdams, D. (Mark Andrew Kurfman, MSME), Experimental Analysis of the Repeatabilityof a Functional Model Derivation Method, 2001.

Okafor, A. C. (Navrag Singh, MSME), Design, Analysis, Performance and Non-DestructiveTesting of Adhesively Bonded Composite Repair of Cracked Aluminum Panels, May2001.

Okafor, A. C. (Navdeep Singh, MSME), Advanced Waveform-Based Acoustic EmissionDetection of Fatigue Crack Propagation in Cracked Aluminum Panels Repaired withAdhesively Bonded Composite Patch, May 2001.

Okafor, A. C. (Kaizad Taraporewalla, MSME), Reverse Engineering of Mechanical PartsUsing CMM, PROE, and PC-DMIS, May 2001.

Okafor, A. C. (Ramachandra Sarma, MSME), A Study of Machinability of Nickel AlloyDuring Turning Using Taguchi Method, May 2001.

Okafor, A. C. (Siddarth Shevgoor, MSME), Finite Element Modeling of Drilling in CompositeMaterials and Determination of Critical Drilling Conditions for Delamination FreeDrilling, July 2001.

Sauer, H. J. Jr. (Milind Mainkar, MSME), Airflow Control Characteristics of Dampers, May2001.

Sauer, H. J. Jr. (Carolina Nunez, MSME), Thermal Characteristics of U. S. Soils, December 2001.

Sauer, H. J. Jr. (Yachao Li, MSME), Evaluation of HVAC Loads Methodology, December 2001.


40/47

38

PhD Dissertations:

Balakrishnan, S. N. (Radhakant Padhi, Ph.D.AE), Optimal Control of Distributed Parameter Systems Using Adaptive Critic Neural Networks, November 2001.

Chen, T. S. (J. Z. Zhao, Ph.D.ME), Nonparallel Thermal Instability of Natural ConvectionFlow over Horizontal and Inclined Plates in Porous Media, May 2001.

Finaish, F. (Changlin Sun, Ph.D.ME), Experimental and Computational Study on Air MixingEnhancement in a Mixing Plenum, May 2001.

Isaac, K. M. (Raja Banerjee, Ph.D.ME), CFD Analysis of Two-Phase Flow with Vapor Emission for Automotive Refueling Systems, September 2001.

Liou, F. W. (Jun Zhang, Ph.D.ME), Path Planning for Multi-axis Hybrid System, 2001.

Sauer, H. J. Jr. [co-advisor], (Bin Li, Ph.D.ME), An Effect of Damper Configuration onTurbulent Mixing for Air-Conditioning System Optimization, December 2001.


41/47

39

HONORS AND SPECIAL AWARDS

Birman, V. :Listed in Whos Who in America 2001 (55 th Edition).

Commendation letter for excellence in teaching in 2000-2001.Listed in Whos Who in America (56 th Edition, 2002).Listed in Whos Who in Science and Engineering (6 th Edition).

Chandrashekhara, K. :UMR Faculty Excellence Award, 2001.Appointed to the rank of Fellow in the American Society of Mechanical Engineers.

Chen, T. S. : Member of International Scientific Committee: International Symposium on Transport

Phenomena and Dynamics of Rotating Machinery (ISROMAC, 2001).

Dharani, L. :AMAE Excellence Award for Teaching, October 2001.UMR Outstanding Teaching Award, 2000-01.UMR Faculty Excellence Award, 2001.Appointed to serve on the University of Missouri Research Board, 2001-02 Academic Year.

Drallmeier, J. A. :UMR Outstanding Teaching Award, 2000-01.Pi Tau Sigma Silver Slide Rule Award for Teaching, 2001.

Eversman, W. :Certificate of Recognition, National Aeronautics and Space Administration, for the creative

development of a technical innovation which has been published as a NASA Tech Brief entitled TFaNs Tone Fan Noise Design/Prediction System Version 1.4.

Finaish, F. : Advisor to Chris Keithley, a Junior in Aerospace Engineering, who was awarded second

place in recognition of his paper presented at the 2001 American Institute of Aeronauticsand Astronautics (AIAA) Region V Student Conference.

Advisor to Chris Keithley and Chris Wilson, who were awarded the first and second placesin the 2001 OURE UMR Symposium.

Advisor to the UMR Advanced Aero Group, who won second place in the 2001 Heavy LiftCompetition.

Leu, M. :AMAE Excellence Award for Research, October 2001.


42/47

40

Liou, F. W. :UMR Faculty Performance Shares, September 2001.

McAdams, D. : Nominated for Best Paper Award, Design Theory and Methodology Conference, Pittsburgh,

PA, 2001.

Miller, B. A. :2001 Reviewer of the Year Award for ASME Journal of Tribology.

Nelson, H. F. :AMAE Excellence Award for Faculty Service, October 2001.2001 Technical Symposium Award from ASHRAE for the paper, High Temperature

Properties of Moist Air, by Nelson, Sauer and Huang.

Nisbett, J. K. :

UMR Outstanding Teaching Award, 2000-01.UM Faculty Performance Shares Award, for efforts in recruiting and retention, 2001.

Sauer, H. J. Jr. :Received Exceptional Service Award at annual ASHRAE meeting, Cincinnati, OH, June

2001 (only 15 members have been so honored to date).2001 Technical Symposium Award from ASHRAE for the paper, High Temperature

Properties of Moist Air, by Nelson, Sauer and Huang.

Stutts, D. S. :AMAE Excellence Award for Faculty Service, October 2001.


43/47

41

PROFESSIONAL ACTIVITIES

Editors of Symposiums, Proceedings, and Journals:

Armaly, B. F. :Editor, Proceedings of the Eighteenth Symposium on Energy Engineering Sciences, U.S.Department of Energy, Argonne National Laboratory, Argonne, IL, May 20-23, 2001

Balakrishnan, S. N.:Associate Editor, AIAA Journal of Guidance, Control, and Dynamics

Birman, V. :Associate Editor, Applied Mechanics ReviewsAssociate Editor, Composites Part B: Engineering

Chen, T.S. :Foreign Editor, Journal of the Chinese Society of Mechanical Engineering (Taiwan)

Crosbie, A. L. :Editor-in-Chief, AIAA Journal of Thermophysics and Heat Transfer

Dharani, L. R.:Editorial Board Member, International Journal of Damage Mechanics

Isaac, K. M. :Editorial Board Member, International Journal of Aerospace and Jet Engines

Liou, F. :Associate Editor, SME Journal of Manufacturing SystemsAssociate Editor, Mechanism and Machine Theory, the Journal of IFToMM The

International Federation for the Theory of Machines and Mechanisms

Nelson, H. F. :Associate Editor, Journal of Thermophysics and Heat Transfer

Pernicka, H.:Managing Editor, The Journal of the Astronautical Sciences

Riggins, D. W.:Associate Editor, AIAA Journal of Propulsion and Power


44/47

42

Chairman, Co-Chairman of Technical Sessions or Conferences:

Armaly, B. F. :General Program Chair for the Eighteenth Symposium on Energy Engineering Sciences, U.S.

Department of Energy, Argonne National Laboratory, Argonne, IL, May 20-23, 2001.

Chair of technical sessions, Forced and Turbulent Convection Heat Transfer (I and II),ASME National Heat Transfer Conference, Anaheim, CA, June 10-14, 2001.

Avula, X. J. R. :Chaired a session at the Micro Systems Modeling 2001 and Computational Nano-techniques

Conference, Hilton Head, SC, March 17-21, 2001.

Balakrishnan, S. N. :Vice-Chair, Invited Sessions, 2001 American Control Conference, Arlington, VA, June

2001. Area Chair, AIAA Missile Guidance, Navigation and Control Conference, Montreal,

Canada, August 2001.Session Chair, 2001 American Control Conference, Arlington, VA, June 2001.

Birman, V. :Co-Chairman of the Symposium Honoring