SuCCESS SToRIES - NSIC

NSIC-TECHNICAL SERVICES

CENTRE

HYDERABAD

SuCCESS SToRIES

ELECTRICAL DEpARTmENT

SuCCESS SToRIES

I am M. Manoj kumar and s/o Madala Ramesh. I successfully completed Master Certificate Course in Industrial Automation & Electrical Designing using MIPOWER in NTSC during 13/04/2017 to 11/08/2017. Faculties taught the subject practically and explained each and everything in detail. And lab equipments are good. Quality of course is good. I got So much of practical Knowledge. I got Placed in Hyderabad Optical & Engineering Private Limited, Hyderabad and I am Getting Rs.10,000/- per month.

I am Pankaj Bharadwaj and s/o Raj Kumar. I successfully completed Master Certificate Course in Industrial Automation & Electrical Designing using MIPOWER in NTSC during 13/04/2017 to 11/08/2017. Faculties taught the subject practically and explained each and everything in detail. And lab equipment’s are good. Quality of course is good. I got So much of practical Knowledge. I got Placed in Hyderabad Consulting Engineers, Hyderabadand I am Getting Rs.10,000/- per month.

I am P. Shiva Krishna and s/o P. Shankaraiah. I successfully completed Master Certificate Course in Industrial Automation in NTSC during FY17-18. Faculties taught the subject practically and explained each and everything in detail. And lab equipment’s are good. Quality of course is good. I got So much of practical Knowledge. I got Placed in Appidi Technology, Kushaiguda and I am Getting Rs.10,000/- per month.

I am Mr. Md Merazul Haque and s/o Nurul Haque. I successfully completed Master Certificate Course in Industrial Automation in NTSC during 16/01/2017To 15/04/2017. Faculties taught the subject practically and explained each and everything in detail. And lab equipment are good. Quality of course is good. I got So much of practical Knowledge. I got Placed in SELEC CONTROLS PVT LTD, Hyderabad and I am Getting Rs.9,500/- per month.

I am M.Raju. I successfully completed Master Certificate Course in Industrial Automation in NTSC During Year 2017-18. I worked as a Guest Faculty in NTSC. Quality of course is good. I got So much of practical Knowledge and Work experience in Technical. I got placed in RenewSys India Private Limited, Hyderabad, as technical engineer and I am earning Rs.15,000/- per month.

I am Ms. Pacha Sai Teja . I did the Master Certificate Course in Industrial Automation in NSIC-TSC during the period from 08/03/2017 to 05/06/2017. After successful completion of the training, I was placed in DELTA SIGMA, Hyderabad. The training at NTSC gave me the required skills & confidence to perform well in my job. My Salary Package is Rs.8000/- per month.

I am Mr. Sudhakar Nadella S/O Subbaiah Nadella. I did the Master Certificate Course in Industrial Automation in NSIC-TSC during the period from 08/03/2017 to 05/06/2017. The training at NTSC gave me the required skills & confidence to perform well in my job.

I am Mr. Bhandari Venkatesh S/O Odelu. I did the Master Certificate Course in Industrial Automation in NSIC-TSC during the period from 23/02/2017 to 22/05/2017. After successful completion of the training, I was placed in SELEC CONTROLS PVT LTD, Hyderabad. The training at NTSC gave me the required skills & confidence to perform well in my job. My Salary Package is Rs.8,000/- per month.

I am S. SHIVA KRISHNA and s/o S.NANAIAH. I successfully completed Master Certificate Course in Electrical Design in NTSC During21/03/2017 to 20/06/2017. Faculties taught the subject practically and explained each and everything in detail. And lab equipment’s are good. Quality of course is good. I got So much of practical Knowledge. I got Placed in Eprosys Engineering Consultants India Pvt Ltd. and I am Getting Rs.10,000/- per month.

I am T. ABHILASH and S/O T. JAYAPAL. I successfully completed Solar Photovoltaic System Course in NTSC During 17/03/2017 to 15/04/2017. Faculties taught the subject practically and explained each and everything in detail .And lab equipments are good. Quality of course is good. I got So much of practical Knowledge. I got Placed in SUN RISE PRIVATE LIMITED, Hyderabad and I am Getting Rs.7,000/- per month

I am SHAIK ISHAHAQ, I successfully completed Electrical Designing E-CAD Course &Solar Photovoltaic System in NTSC during the year 2017-18. Faculties taught the subject practically and explained each and everything in detail. And lab equipment’s are good. Quality of course is good. I got So much of practical Knowledge. I got Placed in Chennai based company and I am Getting Rs. 12,000/- per month

I am C.Prashanth. I successfully completed Master Certificate Course in Industrial Automation in NTSC Hyderabad, During February, 2017-18, After completion of course I got placed in Automation Solution, now I drawing salary of Rs.9,000/- per month, facilities in NTSC good and satisfactory

I am CHANDAN KUMAR GUPTA. I successfully completed Master Certificate Course in Industrial Automation in NTSC During the year 2017-18. Faculties are well and they explained with detail. And lab equipments are good. Quality of course is good. I got So much of practical Knowledge. I got Placed in DELTA SIGMA, Hyderabad and I am Getting Rs.7,000/- per month.

I am CH.VENKATESH. I successfully completed Master Certificate Course in Industrial Automation in NTSC During the year 2017-18. Faculties are well and they explained with detail. And lab equipments are good. Quality of course is good. I got So much of practical Knowledge. I got Placed in DELTA SIGMA AUTOMATION, Hyderabad and I am Getting Rs.8,000/- per month.

I am N.MUJTABA HASAN FAROOQUI S/O N.HANUMATHULA FAROOQUI. I successfully completed Solar Photovoltaic System Course in NTSC During the year 2017-18. Faculties taught the subject practically and explained each and everything in detail. And lab equipments are good. Quality of course is good. I got So much of practical Knowledge. I got Placed in SUN RISE PVT LTD, Hyderabad and I am earning Rs7,000/- per month

I am B.NAGARJUNA. I successfully completed Master Certificate Course in Industrial Automation in NTSC during the year 2017-18. Faculties taught the subject practically and explained each and everything in detail. And lab equipment are good. Quality of course is good. I got So much of practical Knowledge. I got Placed in WATER LIFE INDIA PVT LTD, Hyderabad and I am earning Rs.8,000/- per month

I am N.SHYAM PRASAD. I successfully completed Solar Photovoltaic System in NTSC during the year 2017-18. Faculties taught the subject practically and explained each and everything in detail. And lab equipment are good. Quality of course is good. I got So much of practical Knowledge. I am self-employed this knowledge help me to increase my income and I am earning Rs.5 lakhs per annum

I am M.LATHA TEJASWINI. I successfully completed Solar Photovoltaic System in NTSC during the year 2017-18. Faculties taught the subject practically and explained each and everything in detail. And lab equipment’s are good. Quality of course is good. I got Placed in PPS ENVIRO, Hyderabad and I am earning Rs.7,500/- per month.

I am A. Praveen Kumar. I successfully completed Electrical E-cad in NTSC during the year 2017-18. Faculties taught the subject practically and explained each and everything in detail. And lab equipments are good. Quality of course is good. I got So much of practical Knowledge. I got placed PPS ENVIRO Private Limited, Hyderabad and I am earning Rs.8,000/- per month

I am Gajula Kishore. I successfully completed Electrical Cad in NTSC During the year 2017-18. Faculties taught the subject practically and explained each and everything in detail. And lab equipment’s are good. Quality of course is good. I got So much of practical Knowledge. I got placed Water Life India Pvt Ltd, Hyderabad and I am earning Rs.8,000/- per month

I am J.Naga Bhushanam S/O J.Chandram. I did the Master Certificate Course in Industrial Automation in NSIC-TSC during the period from 08/02/2017 to 08/05/2017. Faculties taught the subject practically and explained each and everything in detail. And lab equipments are good. Quality of course is good. I got So much of practical Knowledge. I got placed Hyderabad consulting engineers and I am earning Rs.10,000/- per month

I am P. Anvesh. I successfully completed Electrical Cad in NTSC During the year 2017-18. Faculties taught the subject practically and explained each and everything in detail. And lab equipment’s are good. Quality of course is good. I got So much of practical Knowledge. I got placed SPORKS AUTOMATION Private Limited, Hyderabad and I am earning Rs.7,000/- per month

I am G. Devender Reddy. I successfully completed Electrical Cad in NTSC During the year 2017-18. Faculties taught the subject practically and explained each and everything in detail. And lab equipment’s are good. Quality of course is good. I got So much of practical Knowledge. I got placed Water Life India Pvt Ltd, Hyderabad and I am earning Rs.7,000/- per month.

I am K. Naresh Chary. I successfully completed Electrical Cad in NTSC during the year 2017-18. Faculties taught the subject practically and explained each and everything in detail. And lab equipment’s are good. Quality of course is good. I got So much of practical Knowledge. I got placed PPS ENVIRO Private Limited, Hyderabad and I am earning Rs.7,500/- per month.

I am G. Vasanth Reddy. I successfully completed Main Project in NTSC during the year 2017-18. Faculties taught the subject practically and explained each and everything in detail. And lab equipment’s are good. Quality of course is good. I got So much of practical Knowledge. I got placed Water Life India Pvt Ltd, Hyderabad and I am earning Rs.7,000/- per month.

I am K.Vijay Kumar. I successfully completed Main Project in NTSC during the year 2017-18. Faculties taught the subject practically and explained each and everything in detail. And lab equipment’s are good. Quality of course is good. I got So much of practical Knowledge. I got placed Delta Automation, Hyderabad and I am earning Rs.8,000/- per month.

I am B.Rahul Kumar. I successfully completed Main Project in NTSC during the year 2017-18. Faculties taught the subject practically and explained each and everything in detail. And lab equipment’s are good. Quality of course is good. I got So much of practical Knowledge. I got placed PPS ENVIRO Private Limited, Hyderabad and I am earning Rs.7,500/- per month.

I am Abdul Basith. I successfully completed Main Project in NTSC during the year 2017-18. Faculties taught the subject practically and explained each and everything in detail. And lab equipment’s are good. Quality of course is good. I got So much of practical Knowledge. I got placed SELEC CONTROL Private Limited, Hyderabad and I am earning Rs.7,500/- per month

I am K.Varnasree. I successfully completed Main Project in NTSC during the year 2017-18. Faculties taught the subject practically and explained each and everything in detail. And lab equipment’s are good. Quality of course is good. I got So much of practical Knowledge. I got placed Delta Automation, Hyderabad and I am earning Rs.7,500/- per month.

I am A. Abhinav. I successfully completed Main Project in NTSC during the year 2017-18. Faculties taught the subject practically and explained each and everything in detail. And lab equipment’s are good. Quality of course is good. I got So much of practical Knowledge. I got placed Water Life India Pvt Ltd, Hyderabad and I am earning Rs.7,000/- per month.

I am V.Sonika. I successfully completed Main Project in NTSC during the year 2017-18. Faculties taught the subject practically and explained each and everything in detail. And lab equipment’s are good. Quality of course is good. I got So much of practical Knowledge I got placed SELEC CONTROL Private Limited, Hyderabad and I am earning Rs.7,200/- per month

I am K.Harsha Sri. I successfully completed Main Project in NTSC during the year 2017-18. Faculties taught the subject practically and explained each and everything in detail. And lab equipment’s are good. Quality of course is good. I got So much of practical Knowledge. I got placed Delta Automation, Hyderabad and I am earning Rs.8,000/- per month.

I am K.Sai Ram. I successfully completed Main Project in NTSC during the year 2017-18. Faculties taught the subject practically and explained each and everything in detail. And lab equipment’s are good. Quality of course is good. I got So much of practical Knowledge. I got placed PPS ENVIRO Private Limited, Hyderabad and I am earning Rs.7,500/- per month.

I am K.Anirudh Venkata Sai. I successfully completed Main Project in NTSC during the year 2017-18. Faculties taught the subject practically and explained each and everything in detail. And lab equipment’s are good. Quality of course is good. I got So much of practical Knowledge. I got placed EPROSYS ENGINEERING CONSULTANTS INDIA PVT LTD, Hyderabad and I am earning Rs.8,500/- per month

I am K.Vijay Kumar. I successfully completed Main Project in NTSC during the year 2017-18. Faculties taught the subject practically and explained each and everything in detail. And lab equipment’s are good. Quality of course is good. I got So much of practical Knowledge. I got placed Water Life India Pvt Ltd, Hyderabad and I am earning Rs.7,500/- per month.

I am K.Chaitanya Kumar. I successfully completed Main Project in NTSC during the year 2017-18. Faculties taught the subject practically and explained each and everything in detail. And lab equipment’s are good. Quality of course is good. I got So much of practical Knowledge. I got placed Delta Automation, Hyderabad and I am earning Rs.7,500/- per month.

I am V.Surendra Kumar . I successfully completed Certified PLC Programmer in NTSC during the year 2017-18. Faculties taught the subject practically and explained each and everything in detail. And lab equipment’s are good. Quality of course is good. I got So much of practical Knowledge, this skills help me to grow in my profession. I am working in JOFLO INDUSTRIES PVT LTD, Hyderabad and I am earning Rs.15,500/- per month

I have done Electrical CAD training program in NSIC in the month March-2018. I learnt complete electrical drawings , Designing and drafting . Faculty taught subject in practical manner by this I could able to get job in M/S Vasavi wheels.

My name is Miss. Sravani , I done Electrical CAD training program in NSIC in the month March-2018.. I learnt complete electrical drawings , Designing and drafting . Faculty taught subject in practical manner by this I could able to get job in M/S Vasavi wheels. I thank NSIC for providing good platform for my career.

My name is Mrs. Anusha,I done Electrical CAD training program in NSIC in the month March-2018.. I learnt complete electrical drawings, Designing and drafting. Faculty taught subject in practical manner by this I could able to get job in M/S Vasavi wheels. I thank NSIC for providing good platform for my career.

My name is Shiva done Electrician Domestic training program in NSIC in the month of Dec 2017- March 2018. I learnt complete electrical wirings, Industrial Control panel wiring and Industrial safety in more practical manner. I got placement in M/s. Elmot Alternators through Job mela. I thank NSIC for providing good platform for my career.

My name is Mahesh done Electrician Domestic training program in NSIC in the month of Dec 2017- March 2018. I learnt complete electrical wirings, Industrial Control panel wiring and Industrial safety in more practical manner. I got placement in M/s. Elmot Alternators through Job mela. I thank NSIC for providing good platform for my career.

My name is Mohammed Yousug Ali done Electrician Domestic training program in NSIC in the month of Dec 2017- March 2018. I learnt complete electrical wirings, Industrial Control panel wiring and Industrial safety in more practical manner. I got placement in M/s. Elmot Alternators through Job mela. I thank NSIC for providing good platform for my career

CNC & CAD/CAm

DEpARTmENT

I am a MD Emamoddin. I am Completed CNC Milling Training in NSIC, Hyderabad during the Period 25-04-2017 To 08-06-2017. After successful completion of the training, I Attended Job Mela Organized by NSIC-TSC, Hyd. in the M/o. 2017. I was placed in KGR Industries, Charlapally, as a Milling Operator. My Salary Package is Rs.1,68,000/- per Annum

I am a T Shivakumar. I am Completed CNC Milling Training in NSIC, Hyderabad during the Period 25-04-2017 To 08-06-2017. After successful completion of the training I joined in ITC Bhadrachalam, as a Supervisor. My Salary Package is Rs.1,44,000/- per Annum

I am a KVKSN Murthy. I am Completed CNC Milling Training in NSIC, Hyderabad during the Period 04-05-2017 To 17-06-2017. After successful completion of the training I joined in JNJ Engineering works in BalaNagar as a In-charge for CNC Machines . My Salary Package is Rs.4,20,000/- per Annum

I am a P Naga Raju. I am Completed CNC Milling Training in NSIC, Hyderabad during the Period 22-06-2017 To 05-08-2017. After successful completion of the training I joined in Kakathiya Vacuums Pumps in Charlapally as a CNC Operator. My Salary Package is Rs.1,20,000/- per Annum

I am a P Naga Raju. I am Completed CNC Milling Training in NSIC, Hyderabad during the Period 22-06-2017 To 05-08-2017. After successful completion of the training I joined in Kakathiya Vacuums Pumps in Charlapally as a CNC Operator. My Salary Package is Rs.1,20,000/- per Annum

I am a MD Abdul Wazeed. I am Completed CNC Milling Training in NSIC, Hyderabad during the Period 22-06-2017 To 05-08-2017. After successful completion of the training I started own work shop in Charlapally with name of Alfatha Engineering Works

I am a L Anil Kumar Reddy. I am Completed CNC Milling Training in NSIC, Hyderabad during the Period 02-08-2017 To 15-09-2017. After successful completion of the training I joined in Dynotech Pvt. Ltd. in Charlapally as a CNC Operator. My Salary Package is Rs. 96,000/- per Annum

I am a K Srinivasa Rao. I am Completed CNC Turning Training in NSIC, Hyderabad during the Period 02-08-2017 To 15-09-2017. After successful completion of the training I started own work shop in Charlapally as a CNC Operator. My Salary Package is Rs.96,000/- per Annum

I am a V Jose. I completed CNC Turning Training in NSIC, Hyderabad during the Period 11-04-2017 To 25-05-2017. After successful completion of the training I joined in Modern Metal Crafts in Jeedimetla as a CNC Operator. My Salary Package is Rs.2,64,000/- per Annum

I am a Riaz Ahmed Khan. I completed CNC Turning Training in NSIC, Hyderabad during the Period 16-06-2017 To 30-07-2017. After successful completion of the training I joined in BAS Technologies in IDA Uppal as a CNC Operator. My Salary Package is Rs.2,52,000/- per Annum

I am a Bala Sathya Siridi Sai nath. I am Completed CNC Turning Training in NSIC, Hyderabad during the Period 11-07-2017 To 24-08-2017 After successful completion of the training I joined in Accurate Rings in Charlapally as a CNC Operator. My Salary Package is Rs.1,14,000/- per Annum

I am R Jagan Mohan Rao. I completed CNC Turning Training in NSIC, Hyderabad during the Period 11-07-2017 To 24-08-2017. After successful completion of the training I joined in VVR Technologies in Jeedimetla as a CNC Operator. My Salary Package is Rs.1,08,000/- per Annum

I am a K Bhasker. I Completed CNC Turning Training in NSIC, Hyderabad during the Period 11-07-2017 To 24-08-2017. After successful completion of the training I joined in Accurate Rings in IDA Nacharam as a CNC Operator. My Salary Package is Rs.1,80,000/- per Annum

I am a K Pavan Sai. I completed CNC Turning Training in NSIC, Hyderabad during the Period 31-07-2017 To 13-09-2017. After successful completion of the training I joined in Sai Deepa Rock Drilling Tools in Charlapally as a CNC Operator. My Salary Package is Rs.1,14,000/- per Annum

I am a MD Eesa. I completed CNC Milling Training in NSIC, Hyderabad during the Period 03-01-2018 To 16-02-2018. After successful completion of the training I joined in Kala Mining&Drilling Equipments in Charlapally as a CNC Operator. My Salary Package is Rs.2,40,000/- per Annum

I am a N Ravi. I Completed CNC Milling Training in NSIC, Hyderabad during the Period 30-11-2017 To 13-01-2018 After successful completion of the training I joined in SS Engineering Works in Charlapally as a CNC Operator. My Salary Package is Rs.1,20,000/- per Annum

I am B Srinivas. I completed CNC Turning Training in NSIC, Hyderabad during the Period 11-07-2017 To 24-08-2017. After successful completion of the training I joined in Sai Deepa Rock Drilling Tools in Charlapally as a CNC Operator. My Salary Package is Rs.1,10,000/- per Annum

I am a O Sandeep Kumar. I Completed CNC Turning Training in NSIC, Hyderabad during the Period 11-07-2017 To 24-08-2017. After successful completion of the training I joined in Accurate Rings in IDA Nacharam as a CNC Operator. My Salary Package is Rs.1,20,000/- per Annum

I am a Shankar Vaidya. I completed CNC Turning Training in NSIC, Hyderabad during the Period 08-11-2017 To 22-12-2017. After successful completion of the training I joined in Medha Tractions Equipments Pvt. Ltd. in Jodimetla as a CNC Programmer &Operator. My Salary Package is Rs.3,84,000/- per Annum

I am a G Srinivas. I completed CNC Turning Training in NSIC, Hyderabad during the Period 08-11-2017 To 22-12-2017. After successful completion of the training I joined in Medha Tractions Equipments Pvt. Ltd. in Jodimetla as a CNC Operator. My Salary Package is Rs.2,64,000/- per Annum

I am a K Bala Vardhan. I completed CNC Turning Training in NSIC, Hyderabad during the Period 08-11-2017 To 22-12-2017. After successful completion of the training I joined in Medha Tractions Equipments Pvt. Ltd. in Jodimetla as a CNC Operator. My Salary Package is Rs.2,16,000/- per Annum

I am a G Sai Kumar. I completed CNC Turning Training in NSIC, Hyderabad during the Period 08-11-2017 To 22-12-2017. After successful completion of the training I joined in Medha Tractions Equipments Pvt. Ltd. in Jodimetla as a CNC Operator. My Salary Package is Rs.1,80,000/- per Annum

I am a B Praveen Kumar. I completed CNC Turning Training in NSIC, Hyderabad during the Period 08-11-2017 To 22-12-2017. After successful completion of the training I joined in Medha Tractions Equipments Pvt. Ltd. in Jodimetla as a CNC Operator. My Salary Package is Rs.1,92,000/- per Annum

I am a N Sagar. I completed CNC Milling&Turning Training in NSIC, Hyderabad during the Period 01-01-2018 To16-03-2018. After successful completion of the training I joined in ATC Pvt. Ltd. in Charlapally as a CNC Operator. My Salary Package is Rs.1,44,000/- per Annum

I am a T Venkatamurthy Goud. I completed CNC Milling&Turning Training in NSIC, Hyderabad during the Period 01-01-2018 To16-03-2018. After successful completion of the training I joined in NSIC-TSC, in Hyderabad as a Apprentices. My Salary Package is Rs.84,000/- per Annum

I am a Shaik Mohiddin. I completed CNC Milling Training in NSIC, Hyderabad during the Period 15-03-2017 To 28-04-2017. After successful completion of the training I joined in Deccan Industries. in Charlaplly as a CNC Operator. My Salary Package is Rs.3,84,000/- per Annum.

I am a K Shiva Kumar. I completed CNC Milling&Turning Training in NSIC, Hyderabad during the Period 01-01-2018 To16-03-2018. After successful completion of the training I joined in Rolon Seals in IDA Nacharam as a CNC Operator. My Salary Package is Rs.1,20,000/- per Annum

I am a B Shiva Kumar. I completed CNC Milling&Turning Training in NSIC, Hyderabad during the Period 01-01-2018 To16-03-2018. After successful completion of the training I joined in Gem engineering (India)Pvt. Ltd. in Charlapally as a CNC Operator. My Salary Package is Rs.1,20,000/- per Annum

I am a S Mario. I completed CNC Milling&Turning Training in NSIC, Hyderabad during the Period 01-01-2018 To16-03-2018. After successful completion of the training I joined in Nucon Aerospace in Hyderabad as a CNC Operator. My Salary Package is Rs.1,14,000/- per Annum

I am a K SADASHIVA. I am Completed CATIA Training in NSIC, Hyderabad during the Period 10-07-2017 To 23-08-2017. After successful completion of the training I joined in Hatitha Tech Serv, Coimbatore as a Design Engineer. My Salary Package is Rs.1,80,000/- per Annum.

I am a V LAXMINARAYANA. I am Completed CATIA Training in NSIC, Hyderabad during the Period 28-06-2017 To 11-08-2017. After successful completion of the training I joined in TATA TECHNOLOGIES Pune as a Apprenticeship Training. My Salary Package is Rs.1,20,000/- per Annum

I am a JOEL MATHAI. I am Completed CATIA Training in NSIC, Hyderabad during

the Period 063-06-2017 To 27-07-2017. After successful completion of the training, I

was placed in Airframe Aero Design Pvt. Ltd, BANGOLRE, as a Junior Simulation

Engineeer. My Salary Package is Rs.2,28,000/- per Annum.

I am a R Mahesh Kumar. I am Completed CATIA Training in NSIC, Hyderabad during the Period 06-11-2017 To 20-12-2017. After successful completion of the training I joined in Yalavarthi Laser Solution in Kushaiguda as a Design Engineer. My Salary Package is Rs.1,08,000/- per Annum.

SoFTWARE-I

DEpARTmENT

I am Venkata Ratna Mala Pati .I am completed Embedded Systems Training in NSIC, Hyderabad Duration from 16-10-2017 to 15-12-2017 Completion of the Training, I was placed in Hyderabad, as a lecturer. My Salary Packages 1, 40,000/- Per Annum

I am Ch.Durga Priyanka. I am completed Dotnet Training in NSIC, Hyderabad Duration 07-09-2017 to 06-11-2017. After Successful Completion of the Training, I Was Placed In Hyderabad,. My Salary Packages 1, 40,000/- Per Annum

I am M.Divya .I am completed C & Data Structures Training in NSIC, Hyderabad Duration from 06-07-2017 to 19-18-2017. After Successful Completion of the Training, I was placed in Hyderabad, as a developer in HGS. My Salary Packages 1, 40,000/- Per Annum

I am M.shilpa.I am completed C & Data Structure Training in NSIC, Hyderabad Duration from 06-07-2017 to 19-08-2017. After Successful Completion of the Training, I was placed in Hyderabad, as a developer in HGS. My Salary Packages 1, 30,000/- Per Annum

I am M.Srija.I am completed JAVA Training in NSIC, Hyderabad Duration from 15-05-2017 to 13-06-2017. After Successful Completion of the Training, I was placed in Hyderabad, as a

developer in unicorn soft. My Salary Packages 1, 30,000/- Per Annum

I am Archana.I am completed C & DATA STRUCTURES Training in NSIC, Hyderabad Duration from 01-08-2017 to 15-10-2017. After Successful Completion of the Training, I was placed in Hyderabad, as a Engineer in Ecil. My Salary Packages 1, 30,000/- Per Annum

I am Swathi.I am completed C & DATA STRUCTURES Training in NSIC, Hyderabad Duration from 15-05-2017 to 13-06-2017. After Successful Completion of the Training, I was placed in Hyderabad, as a Software Engineer in HGS. My Salary Packages 1, 30,000/- Per Annum

I am sandhya.I am completed C & DATA STRUCTURES Training in NSIC, Hyderabad Duration from 15-05-2017 to 13-06-2017. After Successful Completion of the Training, I was placed in Hyderabad, as a Software Engineer in HGS. My Salary Packages 1, 30,000/- Per Annum

I am T.Vinay Kumar .I am completed C & DATA STRUCTURES Training in NSIC, Hyderabad Duration from 15-05-2017 to 13-06-2017. After Successful Completion of the Training, I was placed in Hyderabad, as a Software Engineer in HGS. My Salary Packages 1, 30,000/- Per Annum

I am Sai Pranreeth.I am completed DOTNET Training in NSIC, Hyderabad Duration from 06-11-2017 to 05-01-2018. After Successful Completion of the Training, I was placed in Hyderabad, as a Software Engineer in unicorn soft labs. My Salary Packages 1, 30,000/- Per Annum

I am Nikhitha.I am completed DOTNET Training in NSIC, Hyderabad Duration from 06-11-2017 to 05-01-2018. After Successful Completion of the Training, I was placed in Hyderabad, as a Software Engineer in Unicorn Soft Labs. My Salary Packages 1, 30,000/- Per Annum

I am Rajesh.I am completed DOTNET Training in NSIC, Hyderabad Duration from 06-11-2017 to 05-01-2018. After Successful Completion of the Training, I was placed in Hyderabad, as a Software Engineer in Unicorn Soft Labs. My Salary Packages 1, 30,000/- Per Annum

I am P.Maha Keerthi.I am completed DOTNET Training in NSIC, Hyderabad Duration from06-11-2017 to 05-01-2018. After Successful Completion of the Training, I was placed in Hyderabad, as a Software Engineer in Info source corpe. My Salary Packages 1,30,000/-PerAnnum

I am Nikitha Deshpaney.I am completed JAVA Training in NSIC, Hyderabad Duration from 04-05-2017 to 19-06-2017. After Successful Completion of the Training, I was placed in Hyderabad, as a Software Engineer in Atomic77. My Salary Packages 1, 30,000/- Per Annum.

I am Spandana Durha.I am completed JAVA Training in NSIC, Hyderabad Duration from 04-05-2017 to 19-06-2017. After Successful Completion of the Training, I was placed in Hyderabad, as a Software Engineer in HGS. My Salary Packages 1, 30,000/- Per Annum

I am p.sushmitha.I am completed software testing tools Training in NSIC, Hyderabad Duration from 30-06-2017 to 29-08-2017. After Successful Completion of the Training, I was placed in Hyderabad, as a Software Developer in Cognizant. My Salary Packages 1, 30,000/- Per Annum

I am B.Sushmitha .I am completed Master Certificate Course In Software Development Training in NSIC, Hyderabad Duration from 23-05-2017 to 22-08-2017. After Successful Completion of the Training, I was placed in Hyderabad, as a Software Engineer in Infosys. My Salary Packages 1, 30,000/- Per Annum

I am J.Sri Lekha.I am completed Software Testing Tools Training in NSIC, Hyderabad Duration from 06-06-2017 to 05-08-2017. After Successful Completion of the Training, I was placed in Hyderabad, as a Software Engineer in INFO SOURCE CORPE. My Salary Packages 1, 30,000/- Per Annum

I am B. Gangadhar.I am completed Master Certificate Course in Software Development Training in NSIC, Hyderabad Duration from 23-05-2017 to 22-08-2017. After Successful Completion of the Training, I was placed in Hyderabad, as a Software Engineer in HGS. My Salary Packages 1, 30,000/- Per Annum.

I am T.Divya Mani.I am completed JAVA Training in NSIC, Hyderabad Duration from 04-10-2017 to 19-12-2017. After Successful Completion of the Training, I was placed in Hyderabad, as a Software Engineer inTSC . My Salary Packages 1, 30,000/- Per Annum

.

mECHANICAL

DEpARTmENT

I am R. Prashanth reddy s/o K. Rami Vema Reddy. I successfully completed HVAC Design Course in NTSC. During 01/08/2017 to 14/09/2017. Faculties taught the subject practically and explained each and everything in detail. Quality of course is good. I got So much of practical Knowledge. I got Placed in M/s. CADSYS (India) Ltd, Himayath nagar and I am Getting Rs.6,000/- per month.

I am D. Vamsi Krishna and s/o D. V. Krishna Murthy. I successfully completed HVAC Design Course in NTSC. During 16/08/2017 to 29/09/2017. Faculties taught the subject practically and explained each and everything in detail. Quality of course is good. I got So much of practical Knowledge. I got Placed in M/s. CADSYS (India) Ltd, Himayath nagar and I am Getting Rs.12,000/- per month.

I am G. Santosh s/o G. Gopal. I successfully completed HVAC Design Course in NTSC. During 01/08/2017 to 14/09/2017. Faculties taught the subject practically and explained each and everything in detail. Quality of course is good. I got So much of practical Knowledge. I got Placed in M/s. CADSYS (India) Ltd, Himayath nagar and I am Getting Rs.25,000/- per month.

I am Pilli Sai Kiran s/o P. Srinivas Rao. I successfully completed HVAC Design Course in NTSC. During 01/08/2017 to 14/09/2017. Faculties taught the subject practically and explained each and everything in detail. Quality of course is good. I got So much of practical Knowledge. I got Placed in M/s. GVK Bio Sciences Pvt Ltd, Nacharam and I am Getting Rs.14,000/- per month

I am Mohan B S/o, Venkatram. I successfully completed HVAC Design Course in NTSC. During 01/08/2017 to 14/09/2017. Faculties taught the subject practically and explained each and everything in detail. Quality of course is good. I got So much of practical Knowledge. I got Placed in M/s. Satya technical Institute, Medchal and I am Getting Rs.21,000/- per month.

I am Kaataboina Naresh S/o, Kaataboina Malliah. I successfully completed HVAC Design Course in NTSC. During 17/01/2018 to 02/03/2018. Faculties taught the subject practically and explained each and everything in detail. Quality of course is good. I got So much of practical Knowledge. I got Placed in M/s. Appidi Technologies, Jeedimetla and I am Getting Rs.10,000/- per month.

I am P Bhargav Yadav S/o P Ramachandra. I successfully completed Welding(Arc & TIG) Course in NTSC. During 20/10/2017 to 03/12/2017. Faculties taught the subject practically and explained each and everything in detail. Quality of course is good. I got So much of practical Knowledge. I got Placed in M/s. Honeybee Electronic Appliances, Nacharam and I am Getting Rs.10,000/- per month.

I am Ajay Yadav S/o Dhaneshwar Ram. I successfully completed Welding(Arc & TIG) Course in NTSC. During 20/10/2017 to 03/12/2017. Faculties taught the subject practically and explained each and everything in detail. Quality of course is good. I got So much of practical Knowledge. I got Placed in M/s. Siri Technologies, Kushaiguda and I am Getting Rs.10,000/- per month.

I am Gera RajeshS/o. Venkaiah. I successfully completed Welding(Arc & TIG) Course in NTSC. During 20/10/2017 to 03/12/2017. Faculties taught the subject practically and explained each and everything in detail. Quality of course is good. I got So much of practical Knowledge. I got Placed in M/s. Elmas Magnetic Pvt Ltd, Kushaiguda and I am Getting Rs.20,000/- per month.

I am Y Anil, S/o Y Arvind. I successfully completed Field Engineer RACW Course in NTSC. During 11/05/2017 to 10/08/2018. Faculties taught the subject practically and explained each and everything in detail. Quality of course is good. I got So much of practical Knowledge. I got Placed in M/s. Epiroc, Cherlapally and I am Getting salary Rs.10,000/- per month.

I am Palakura Saisrikanth Goud S/o, P Ramesh Goud. I successfully completed HVAC Design Course in NTSC. During 17/01/2018 to 02/03/2018. Faculties taught the subject practically and explained each and everything in detail. Quality of course is good. I got So much of practical Knowledge. I got Placed in M/s. National Aircon Pvt ltd, Amberpet and I am Getting Rs.8,500/- per month.

I am Saheb Noor Khan S/o, Hazrath Noor Khan. I successfully completed HVAC Design Course in NTSC. During 25/01/2018 to 10/03/2018. Faculties taught the subject practically and explained each and everything in detail. Quality of course is good. I got So much of practical Knowledge. I got Placed in M/s. National Aircon Pvt ltd, Amberpet and I am Getting Rs.8,500/- per month.

I am K Sugandh Reddy S/o, Ram Reddy. I successfully completed HVAC Design Course in NTSC. During 25/01/2018 to 10/03/2018. Faculties taught the subject practically and explained each and everything in detail. Quality of course is good. I got So much of practical Knowledge. I got Placed in M/s. H & S Infratech Pvt ltd, Bowenpally and I am Getting Rs.5,000/- per month.

I am Gudimella Nikhil S/o, Gudimella Ramesh. I successfully completed Field Engineer RACW Course in NTSC. During 20/12/2017 to 18/02/2018. Faculties taught the subject practically and explained each and everything in detail. Quality of course is good. I got So much of practical Knowledge. I got Placed in M/s. S Enterprises, Karkhana Pvt ltd, Bowenpally and I am Getting Rs.8,000/- per month and also company is providing food and accommodation.

I am Soma Praveen Kumar S/o, Soma Bheemaiah. I successfully completed Field Engineer RACW Course in NTSC. During 20/12/2017 to 18/02/2018. Faculties taught the subject practically and explained each and everything in detail. Quality of course is good. I got So much of practical Knowledge. I have started my own Enterprise M/s. Sri Balaji Service Point, Manchiriyal town and the business is doing excellent.

I am Gummula Srinivas S/o, Gumallah Malliah. I successfully completed Field Engineer RACW Course in NTSC. During 20/12/2017 to 18/02/2018. Faculties taught the subject practically and explained each and everything in detail. Quality of course is good. I got So much of practical Knowledge. I have started my own Enterprise M/s. Sri Hanuman Service Point, Manchiriyal town and the business is doing excellent.

I am Vinay Kumar P S/o, P Kornel. I successfully completed Field Engineer RACW Course in NTSC. During 20/12/2017 to 18/02/2018. Faculties taught the subject practically and explained each and everything in detail. Quality of course is good. I got So much of practical Knowledge. I got Placed in M/s. Heritage Foods ltd, Shameerpet for a salary of Rs.14,000/- per month.

I am Niranjan K, S/o, K Gopal. I successfully completed Field Engineer RACW Course in NTSC. During 20/12/2017 to 18/02/2018. Faculties taught the subject practically and explained each and everything in detail. Quality of course is good. I got So much of practical Knowledge. I got Placed in M/s. Trigger Air A Company, Rajbhavan road Hyderabad for a salary of Rs.14,000/- per month.

I am Ellendula Sagar, S/o, Ellendulla Sattiah. I successfully completed Field Engineer RACW Course in NTSC. During 20/12/2017 to 18/02/2018. Faculties taught the subject practically and explained each and everything in detail. Quality of course is good. I got So much of practical Knowledge. I got Placed in M/s. S Enterprises, Karkhana Pvt ltd, Bowenpally and I am getting Rs.6,000/- per month and company is also providing food and accommodation.

I am Amboji Sampath, S/o, Ellendulla Sattiah. I successfully completed Field Engineer RACW Course in NTSC. During 11/05/2017 to 10/08/2017. Faculties taught the subject practically and explained each and everything in detail. Quality of course is good. I got So much of practical Knowledge. I got Placed in M/s. Bisleri International Pvt Ltd, Khairatabad, and I am getting Rs.12,000/- per month.

I am Shaik siddique S/o. Shaik Muniruddin I successfully completed Field Engineer RACW Course in NTSC. During 20/12/2017 to 18/02/2018. Faculties taught the subject practically and explained each and everything in detail. Quality of course is good. I got So much of practical Knowledge. I got Placed in M/s. MS Service centre, at Ecil ‘x’road,and I am Getting Rs.8,000/- per month.

I am kakkiraparambil moosa S/o. kakkiraparambil Ibrahim I successfully completed Field Engineer RACW Course in NTSC. During 20/12/2017 to 18/02/2018. Faculties taught the subject practically and explained each and everything in detail. Quality of course is good. I got So much of practical Knowledge. I got Placed in M/s. MS Hetero Labs Limitted, at jeedimetla ,and I am Getting Rs.9,000/- per month.

I am Shakeer Pasha S/o. Fasiuddin I successfully completed Field Engineer RACW Course in NTSC. During 20/12/2017 to 18/02/2018. Faculties taught the subject practically and explained each and everything in detail. Quality of course is good. I got So much of practical Knowledge. I got Placed in M/s. MS Service centre, at Ecil ‘x’road ,and I am Getting Rs.9,000/- per month.

I am Sagar Lal S/o. Fasiuddin I successfully completed Field Engineer RACW Course in NTSC. During 20/12/2017 to 18/02/2018. Faculties taught the subject practically and explained each and everything in detail. Quality of course is good. I got So much of practical Knowledge. I got Placed in M/s. MS Service centre, at Ecil ‘x’road ,and I am Getting Rs.8,500/- per month.

I am Mohd Shohib Ansar S/o. D. Kasim, I successfully completed Field Engineer RACW Course in NTSC. During 20/12/2017 to 18/02/2018. Faculties taught the subject practically and explained each and everything in detail. Quality of course is good. I got So much of practical Knowledge. I got Placed in M/s. MS Service centre, at Ecil ‘x’road ,and I am Getting Rs.9,500/- per month.

I am Mohd Hussain S/o. Mohd Arif. I successfully completed Field Engineer RACW Course in NTSC. During 20/12/2017 to 18/02/2018. Faculties taught the subject practically and explained each and everything in detail. Quality of course is good. I got So much of practical Knowledge. I got Placed in M/s. MS Service centre, at Ecil ‘x’road ,and I am Getting Rs.8,500/- per month.

I am MD. Riyazuddin S/o. MD. Basheeruddin. I successfully completed Field Engineer RACW Course in NTSC. During 20/12/2017 to 18/02/2018. Faculties taught the subject practically and explained each and everything in detail. Quality of course is good. I got So much of practical Knowledge. I got Placed in M/s. MS Service centre, at Ecil ‘x’road ,and I am Getting Rs.11,000/- per month.

I am P. Mallesh S/o. P Venkatiah. I successfully completed Field Engineer RACW Course in NTSC. During 11/09/2017 to 10/12/2017. Faculties taught the subject practically and explained each and everything in detail. Quality of course is good. I got So much of practical Knowledge. I got Placed in M/s. M/s. S Enterprises, Karkhana Pvt ltd, Bowenpally and I am getting Rs.6,000/- per month and company is also providing food and accommodation.

SoFTWARE-II

DEpARTmENT

I am G.Durga Bhavani. I did the Beautician in NTSC, Hyderabad for 1 month.

After successful completion of the training, I was placed in Chanikya Typing Institute as Faculty. The training at NTSC gave me the required skills & confidence to perform well in my job. My salary package is Rs. 1,92,000/- per Annum. (MEPMA)

I am P.Rani. I did the Beautician Course in NTSC, Hyderabad for 1 month. After successful completion of the training, I was placed in NSIC as Fashion Designing Faculty.The training at NTSC gave me the required skills & confidence to perform well in my job. My salary package is Rs. 2,16,000/- per Annum. (MEPMA)

I am N.R.Dayanand. I did the Media Developer course in NTSC, Hyderabad. After successful completion of the training, I was placed in Imedx as Medical Transcriptions, at Ameerpet, Hyderabad. The training at NTSC gave me the required skills & confidence to perform well in my job. My salary package is Rs. 1,80,000/- per Annum. (MEPMA)

I am M.Swathi. I did the Media Developer course in NTSC, Hyderabad for 2 Months. After successful completion of the training, I was placed in Sri Anand Power System as Technical Assistant, Kamala Nagar, Hyderabad. The training at NTSC gave me the required skills & confidence to perform well in my job. My salary package is Rs. 2,04,000/- per Annum. (MEPMA)

I am CH.Pravalika. I did the Media Developer course in NTSC, Hyderabad for 2 Months. After successful completion of the training, I was placed in Sri Anand Power System as Technical Assistant, Kamala Nagar, Hyderabad . The training at NTSC gave me the required skills & confidence to perform well in my job. My salary package is Rs. 1,56,000/- per Annum. (MEPMA)

I am N.Adi Lakshmi. I did the Ms.office course in NTSC, Hyderabad for 3 months. After successful completion of the training, I was placed in NSIC as Teaching Faculty. The training at NTSC gave me the required skills & confidence to perform well in my job. My salary package is Rs. 1,56,000/- per Annum. (MEPMA)

I am P.Sandhya Rani. I did the Media Developer course in NTSC, Hyderabad for 3 months. After successful completion of the training, I was placed in Rishab Eye Clinic as employee. The training at NTSC gave me the required skills & confidence to perform well in my job. My salary package is Rs. 96,000/- per Annum. (MEPMA)

I am A.Mahesh. I did the Ms.office course in NTSC, Hyderabad for 2 months . After successful completion of the training, I was placed in Civil Supply Department as Dist Manager. The training at NTSC gave me the required skills & confidence to perform well in my job. My salary package is Rs. 96,000/- per Annum. (MEPMA)

I am V.Vara Prasad. I did the Ms.office course in NTSC, Hyderabad for 2 months. After successful completion of the training, I was placed in NSIC as Assitant to Accountant . The training at NTSC gave me the required skills & confidence to perform well in my job. My salary package is Rs. 96,000/- per Annum. (MEPMA)

I am P.Srinivas Chary. I did the Media Developer course in NTSC, Hyderabad for 2 months. After successful completion of the training, I was placed in Eliscription Pvt Ltd as Medical Transcriptionist Trainee. The training at NTSC gave me the required skills & confidence to perform well in my job. My salary package is Rs. 96,000/- per Annum. (MEPMA)

I am K.B.Venkata Lakshmi. I did the MBA Project in NTSC, Hyderabad for 45 days . After successful completion of the training, I was placed in Karvy Gateway as Internet Accountant. The training at NTSC gave me the required kills & confidence to perform well in my job. My salary package is Rs.

1,44,000/- per Annum. (MEPMA)

I am N.Himasri Vasthavi. I did the in MBA Project NTSC, Hyderabad for 45 days. After successful completion of the training, I was placed in Karvy Gateway as Internet Accountant. The training at NTSC gave me the required skills & confidence to perform well in my job. My salary package is Rs. 1,68,000/- per Annum. (MEPMA)

I am A.Gowthami. I did the MBA Project in NTSC, Hyderabad for 45 days. After successful completion of the training, I was placed in Karvy Gateway as Internet Accountant. The training at NTSC gave me the required skills & confidence to perform well in my job. My salary package is Rs. 1,56,000/- per Annum. (MEPMA)

I am S.Raju Rakshakar. I did the MBA Project in NTSC, Hyderabad for 45 days. After successful completion of the training, I was placed in Karvy Gateway as Internet Accountant. The training at NTSC gave me the required skills & confidence to perform well in my job. My salary package is Rs. 1,56,000/- per Annum. (MEPMA).

I amL.Anusha. I did the MBA Project in NTSC, Hyderabad for 45 days. After successful completion of the training, I was placed in Karvy Gateway as Internet Accountant. The training at NTSC gave me the required skills & confidence to perform well in my job. My salary package is Rs. 1,56,000/- per Annum. (MEPMA).

I am Srikanth Reddy. I did the MBA Project in NTSC, Hyderabad for 45 days . After successful completion of the training, I was placed in Cognizant as Process Executive. The training at NTSC gave me the required skills & confidence to perform well in my job. My salary package is

Rs. 2,16,000/- per Annum. (MEPMA).

I am M.Noothan Kumar. I did the MBA Project in NTSC, Hyderabad for 45 days . After successful completion of the training, I was placed in Simrithi Industries as Accountant. The training at NTSC gave me the required skills & confidence to perform well in my job. My salary package is

Rs. 1,80,000/- per Annum. (MEPMA)

I am P.Sreenivasulu. I did the Tally in NTSC, Hyderabad from 22/8/17 to21/9/17. After successful completion of the training, I was placed in Navabharath Company. The training at NTSC gave me the required skills & confidence to perform well in my job. My salary package is Rs. 1,80,000/- per Annum. (MEPMA)

I amB.Nayudu. I did the Tally course in NTSC, Hyderabad from 06/09/2017 to 05/10/2017. After successful completion of the training, I was placed in Simrithi Company Hyderabad. The training at NTSC gave me the required skills & confidence to perform well in my job. My salary package is Rs. 1,80,000/- per Annum. (MEPMA)

I am Mahaveer Singh. I did the Tally in NTSC, Hyderabad for 2 Months. After successful completion of the training, I was placed in Shakti Mata Enterprises as Employee. The training at NTSC gave me the required skills & confidence to perform well in my job. My salary package is Rs. 1,44,000/- per Annum. (MEPMA)

I am R.P Latha. I did the Tally in NTSC, Hyderabad from 23/06/2017 to 22/07/2017. After successful completion of the training, I was placed in Shakti Mata Enterprises as Employee , Hyderabad. The training at NTSC gave me the required skills & confidence to perform well in my job. My salary package is Rs. 84,000/- per Annum. (MEPMA)

I am J.Pravalika. I did the Tally in NTSC, Hyderabad from 13/07/2017 to 12/08/2017. After successful completion of the training, I was placed in Sai Satya Enterprises. The training at NTSC gave me the required skills & confidence to perform well in my job. My salary package is Rs. 1,80,000/- per Annum. (MEPMA)

I am D.Saikumar. I did the Tally in NTSC, Hyderabad from 201/05/2017 to 31/05/2017. After successful completion of the training, I was placed in United Health. The training at NTSC gave me the required skills & confidence to perform well in my job. My salary package is Rs. 2, 40,000/- per Annum. (MEPMA)

I am P.Chanti. I did the Tally in NTSC, Hyderabad from 16/05/2017 to 15/06/2017. After successful completion of the training, I was placed in Modi Properties Ltd. The training at NTSC gave me the required skills & confidence to perform well in my job. My salary package is Rs. 2,40,000/- per Annum. (MEPMA)

I am B V S Srikanth. I did the Tally in NTSC, Hyderabad from 22/05/2017 to 21/06/2017. After successful completion of the training, I was placed in SSVV Institute as Lecturer. The training at NTSC gave me the required skills & confidence to perform well in my job. My salary package is Rs. 1,92,000/- per Annum. (MEPMA)

I am SK V Gopal Krishna. I did the Tally in NTSC, Hyderabad from 05/06/2017 004/07/2017. After successful completion of the training, I was placed in Med us as Accountant. The training at NTSC gave me the required skills & confidence perform well in my job. My salary package is Rs. 1,20,000/- per Annum.

MEPMA)

I am G.Jaya Ram . I did the Tally in NTSC, Hyderabad from 05/06/2017 to 04/07/2017. After successful completion of the training, I was placed in NSIC as Acccountant. The training at NTSC gave me the required skills & confidence to perform well in my job. My salary package is Rs. 1,44,000/- per Annum. (MEPMA)

I am K.Gayathri. I did Tally in NTSC, Hyderabad from 27/06/2016 to 26/07/2017. After successful completion of the training, I was placed in Pulse Pharamaticals Pvt Ltd. The training at NTSC gave me the required skills & confidence to perform well in my job. My salary package is Rs. 96,000/- per Annum. (MEPMA)

I am S.Srikanth Reddy. I did the MBA in NTSC, Hyderabad from 27/04/2017 to 10/06/2017. After successful completion of the training, I was placed in Cognizant. The training at NTSC gave me the required skills & confidence to perform well in my job. My salary package is Rs. 1,44,000/- per Annum. (MEPMA)

I am P.Anjali. I did the Main Project in NTSC, Hyderabad from 05/05/2017 to 18/06/2017. After successful completion of the training, I was placed in Swami Vivekananda Institute as Lecturer. The training at NTSC gave me the required skills & confidence to perform well in my job. My salary package is Rs. 1,08,000/- per Annum. (MEPMA)

I am L.Anusha. I did the Main Project in NTSC, Hyderabad from 15/05/2017 to 028/06/2017. After successful completion of the training, I was placed in Vivo India as MIS Executive.The training at NTSC gave me the required skills & confidence to perform well in my job. My salary package is Rs. 84,000/- per Annum. (MEPMA)

I am B.Srinivas Reddy. I did the Main Project in NTSC, Hyderabad 2 months. After successful completion of the training, I was placed in ICICI Bank. The training at NTSC gave me the required skills & confidence to perform well in my job. My salary package is Rs. 2,16,000/- per Annum. (MEPMA)

I am T.Srikanth. I did the Main Project in NTSC, Hyderabad from 15/05/2017 to 28/06/2017. After successful completion of the training, I was placed in ICICI Bank as Accountant. The training at NTSC gave me the required skills & confidence to perform well in my job. My salary package is Rs. 1,08,000/- per Annum. (MEPMA)

I am L.Harish. I did the Main Project in NTSC, Hyderabad from 15/05/2017 to 28/06/2017. After successful completion of the training, I was placed in ICICI Bank. The training at NTSC gave me the required skills & confidence to perform well in my job. My salary package is Rs. 2,16,000/- per Annum. (MEPMA)

I amM.R.Gouthami. I did the Main Project in NTSC, Hyderabad from 01/06/2017 to 15/07/2017. After successful completion of the training, I was placed in Genpact. The training at NTSC gave me the required skills & confidence to perform well in my job. My salary package is

Rs. 2,16,000/- per Annum. (MEPMA)

I am M.V Chandra Sekhar. I did the Ms.office in NTSC, Hyderabad from 14/09/2017 to 13/10/2017. After successful completion of the training, I was placed in Anand Group of Industries. The training at NTSC gave me the required skills & confidence to perform well in my job. My salary package is Rs. 2,40,000/- per Annum. (MEPMA)

I am Badusha Jhrahim. I did the Media Developer in NTSC, Hyderabad from 21/02/2017 to 20/04/2017. After successful completion of the training, I was placed in Macro Media as Designer. The training at NTSC gave me the required skills & confidence to perform well in my job. My salary package is Rs. 2,40,000/- per Annum. (MEPMA)

I am G.Urmila. I did the Ms.offics and Internet in NTSC, Hyderabad from 27/03/2017 to 26/04/2017. After successful completion of the training, I was placed in Yasodha Pharmacy. The training at NTSC gave me the required skills & confidence to perform well in my job. My salary package is Rs. 1,80,000/- per Annum. (MEPMA)

I am Mani Kumari. I did the Tally in NTSC, Hyderabad from 06/03/2017 to 04/04/2017. After successful completion of the training, I was placed in Varun Motors. The training at NTSC gave me the required skills & confidence to perform well in my job. My salary package is Rs. 1,80,000/- per Annum. (MEPMA)

I am Mani Kumari. I did the Tally in NTSC, Hyderabad from 06/03/2017 to 04/04/2017. After successful completion of the training, I was placed in Varun Motors. The training at NTSC gave me the required skills & confidence to perform well in my job. My salary package is Rs. 1,80,000/- per Annum. (MEPMA)

ELECTRoNICS

DEpARTmENT

SUCCESS STORY OF TRAINEES

Name of the Trainee: Mr. Karthan Srikanth Father’s Name: Karthan Devidas

Address: H-No-2-27, Hanumangally, Nandipet, nizamabad,

Pin-503212 NIZAMABAD, Telangana, India

Contact Number: 8099603723

FAMILY BACKGROUND:

Karthan Srikanth son of kumara swamy belongs to an average family from a rural background and lives in a very small village Nandipet, nizamabad. He underwent MASTER CERTIFICATE COURSE IN ELECTRONICS 45 (11/12/17 to 24/01/18) days in NSIC-TSC. During his training period he gained rich practical knowledge in Electronics subject like circuit assembling & testing, production techinique,Quality control techinique,R&D technique, soldering technics PC hardware & Networking, circuit assembling & testing , PCB designing , SMD techniques , soldering , Fiber Optic Cable Interconnecting with splicing machine.

After successful completion of his course he got a placement in M/s. BHAGAWATI PRODUCTS LIMITED Maheshwaram Road, hyd, Telangana.

PRESENT STATUS:

Presently Sh. V Shiva kumar working as a Technician in BHAGAWATI PRODUCTS LIMITED and he is drawn salary 9000/- per month. He feels happy, and said thanks to NSIC.


Name of the Trainee: Bitla Divya Father’s Name: B Ramesh

Address: H-No-5-46, Poosala, Sultanabad, peddapalli, Karimnagar, pin-505185, Karimnagar, Telangana, IndiaContact Number: 9032507586

FAMILY BACKGROUND:

Bitla Divya D/O of B Ramesh belongs to an average family from a rural background and lives in a very small village peddapalli, Karimnagar,. she underwent MASTER CERTIFICATE COURSE IN ELECTRONICS 45 (11/12/17 to 24/01/18) days in NSIC-TSC. During his training period she gained rich practical knowledge in Electronics subject like circuit assembling & testing, production techinique,Quality control techinique,R&D technique, soldering technics PC hardware & Networking, circuit assembling & testing , PCB designing , SMD techniques , soldering , Fiber Optic Cable Interconnecting with splicing machine.

After successful completion of his course She got a placement in M/s. BHAGAWATI PRODUCTS LIMITED Maheshwaram Road, hyd, Telangana.

PRESENT STATUS:

Presently Sh. Bitla Divya working as a Technician in BHAGAWATI PRODUCTS LIMITED and she is drawn salary 9000/- per month. she feels happy, and said thanks to NSIC.


Name of the Trainee: Kotha Rani Father’s Name: Narsingam

Address: H-No-1-57, Erraguntapally, peddapally, Pin-505416, PEDDAPALLI, Telangana, India, IndiaContact Number: 9491815496

FAMILY BACKGROUND:

Kotha Rani D/O of Narsingam belongs to an average family from a rural background and lives in a very small village peddapalli, Karimnagar,. she underwent MASTER CERTIFICATE COURSE IN ELECTRONICS 45 (11/12/17 to 24/01/18) days in NSIC-TSC. During his training period she gained rich practical knowledge in Electronics subject like circuit assembling & testing, production techinique,Quality control techinique,R&D technique, soldering technics PC hardware & Networking, circuit assembling & testing , PCB designing , SMD techniques , soldering , Fiber Optic Cable Interconnecting with splicing machine.


PRESENT STATUS:

Presently Sh. Kotha Rani working as a Technician in BHAGAWATI PRODUCTS LIMITED and she is drawn salary 9000/- per month. she feels happy, and said thanks to NSIC.


Name of the Trainee: Samala Ramya Father’s Name: Samala Laxminarayana

Address: H-No-15-43, Choppadandi, Karimnagar, pin-505415, Karimnagar, Telangana, India IndiaContact Number: 915456803

FAMILY BACKGROUND:

Samala Ramya D/O of Samala Laxminarayana belongs to an average family from a rural background and lives in a very small village Choppadandi, Karimnagar,. she underwent MASTER CERTIFICATE COURSE IN ELECTRONICS 45 (11/12/17 to 24/01/18) days in NSIC-TSC. During his training period she gained rich practical knowledge in Electronics subject like circuit assembling & testing, production techinique,Quality control techinique,R&D technique, soldering technics PC hardware &

Networking, circuit assembling & testing , PCB designing , SMD techniques , soldering , Fiber Optic Cable Interconnecting with splicing machine.


PRESENT STATUS:

Presently Sh. Samala Ramya working as a Technician in BHAGAWATI PRODUCTS LIMITED and she is drawn salary 9000/- per month. she feels happy, and said thanks to NSIC.


Name of the Trainee: Shivapalli Saharika Father’s Name: S Srinivas

Address: H-No-5-1/2, Sulthanpur, eligedu, Peddapally, Pin-505525, PEDDAPALLI, Telangana, India IndiaContact Number: 9032734392

FAMILY BACKGROUND:

Shivapalli Saharika D/O of S Srinivas belongs to an average family from a rural background and lives in a very small village peddapalli, Karimnagar,. she underwent MASTER CERTIFICATE COURSE IN ELECTRONICS 45 (11/12/17 to 24/01/18) days in NSIC-TSC. During his training period she gained rich practical knowledge in Electronics subject like circuit assembling & testing, production techinique,Quality control techinique,R&D technique, soldering technics PC hardware & Networking, circuit assembling & testing , PCB designing , SMD techniques , soldering , Fiber Optic Cable Interconnecting with splicing machine.


PRESENT STATUS:

Presently Sh. Shivapalli Saharika working as a Technician in BHAGAWATI PRODUCTS LIMITED and she is drawn salary 9000/- per month. she feels happy, and said thanks to NSIC.


Name of the Trainee: MADIREDDI PARVATHI

Father’s Name: M APPA RAO


FAMILY BACKGROUND:

MADIREDDI PARVATHI daughter of M APPA RAO belongs to an average family from a rural background and lives in a very small village. She underwent MEPMA THROUGH HOLE ASSEMBLY OPERATOR, BATCH-001. 3-months in NSIC-TSC. During his training period he gained rich practical knowledge in Electronics subject like circuit assembling & testing, production techinique,Quality control techinique,R&D technique, soldering technics PC hardware & Networking, circuit assembling & testing , PCB designing , SMD techniques , soldering.

After successful completion of her course she got a placement in M/s. ECIL, hyderabad.

PRESENT STATUS:

Presently MADIREDDI PARVATHI working as a Technician in ECIL and she is drawing salary 12000/- per month. She feels happy, and said thanks to NSIC.


Name of the Trainee: PIDISHETTY GUNASAGAR

Father’s Name: PIDISHETTY RAMESH

.Contact Number: 9652529225

FAMILY BACKGROUND:

PIDISHETTY GUNASAGAR son of : PIDISHETTY RAMESH. belongs to an average family from a rural background and lives in a very small village. He underwent MEPMA DESIGN ENGINEER,BATCH-002. 3-months in NSIC-TSC. During his training period he gained rich practical knowledge in Electronics subject like circuit assembling & testing, production techinique,Quality control techinique,R&D technique, soldering technics PC hardware & Networking, circuit assembling & testing , PCB designing , SMD techniques , soldering , Fiber Optic Cable Interconnecting with splicing machine.

After successful completion of his course he got a placement in M/s VEM TECHNOLOGIES PVT.LTD, SD Road SecunderabadTelangana.

PRESENT STATUS:

Presently Sh. V Shiva kumar working as a Technician in VEM TECHNOLOGIES PVT.LTD and he is drawn salary 10500/- per month. He feels happy, and said thanks to NSIC.


Name of the Trainee: S.MAHAESH

Father’s Name: KANAKAIA


FAMILY BACKGROUND:

: S.MAHAESH son of : KANAKAIA. belongs to an average family from a rural background and lives in a very small village. He underwent MEPMA DESIGN ENGINEER,BATCH-002. 3-months in NSIC-TSC. During his training period he gained rich practical knowledge in Electronics subject like circuit assembling & testing, production techinique,Quality control techinique,R&D technique, soldering technics PC hardware & Networking, circuit assembling & testing , PCB designing , SMD techniques , soldering , Fiber Optic Cable Interconnecting with splicing machine.

After successful completion of his course he got a placement in M/s VEM TECHNOLOGIES PVT.LTD, SD Road SecunderabadTelangana.

PRESENT STATUS:

Presently Sh. V Shiva kumar working as a Technician in VEM TECHNOLOGIES PVT.LTD and he is drawn salary 10500/- per month. He feels happy, and said thanks to NSIC.

SUCCESS STORY OF TRAINEE

Name of the Trainee: B.SRIKANTH

Father’s Name:BATTINI


FAMILY BACKGROUND:

B.SRIKANTH son of Battini belongs to a middle family from an urban area background and. he underwent MEPMA DESIGN ENGINEER,BATCH-002. 3-months in NSIC-TSC. During his training period she gained rich practical knowledge in Electronics subject like circuit assembling & testing, production techinique,Quality control techinique,R&D technique, soldering technics, PC hardware & Networking, circuit assembling & testing, SMD techniques,soldering, Fiber Optic Cable Interconnecting with splicing machine etc.

After successful completion of her course she got a placement in M/s. VEM TECHNOLOGIES PVT.LTD hyderabad in Telangana.

PRESENT STATUS:

Presently B.SRIKANTH working as a Technician in VEM TECHNOLOGIES PVT.LTD and she is drawn salary 10,500/- per month. She feels happy.


Name of the Trainee: Mr. Chintal Akhil

Father’s Name: c.Narsing Rao


FAMILY BACKGROUND:

Chintal Akhil son of : c.Narsing Rao. belongs to an average family from a rural background and lives in a very small village. He underwent MEPMA DESIGN ENGINEER,BATCH-001. 3-months in NSIC-TSC. During his training period he gained rich practical knowledge in Electronics subject like circuit assembling & testing, production techinique,Quality control techinique,R&D technique, soldering technics PC hardware & Networking, circuit assembling & testing , PCB designing , SMD techniques , soldering , Fiber Optic Cable Interconnecting with splicing machine.

After successful completion of his course he got a placement in BHAGAWATI PRODUCTS LIMITED, Hyderabad.

PRESENT STATUS:

Presently Sh. Chintal Akhil r working as a Technician in BHAGAWATI PRODUCTS LIMITED, Hyderabad.and he is drawn salary 9000/- per month. He feels happy, and said thanks to NSIC.


Name of the Trainee: Mr. Chinthakindi Mahesh

Father’s Name: C.narshima


FAMILY BACKGROUND:

Chinthakindi Mahesh son of : C.narshima . belongs to an average family from a rural background and lives in a very small village. He underwent MEPMA DESIGN ENGINEER,BATCH-001. 3-months in NSIC-TSC. During his training period he gained rich practical knowledge in Electronics subject like circuit assembling & testing, production techinique,Quality control techinique,R&D technique, soldering technics PC hardware & Networking, circuit assembling & testing , PCB designing , SMD techniques , soldering , Fiber Optic Cable Interconnecting with splicing machine.


PRESENT STATUS:

Presently Sh. Chinthakindi Mahesh r working as a Technician in BHAGAWATI PRODUCTS LIMITED, Hyderabad. and he is drawn salary 9000/- per month. He feels happy, and said thanks to NSIC.


Name of the Trainee: Mr. Gaddamedi Devanand

Father’s Name: GADDAMEDI THIMMAIAH.


FAMILY BACKGROUND:

Gaddamedi Devanand son of : GADDAMEDI THIMMAIAH.. belongs to an average family from a rural background and lives in a very small village. He underwent MEPMA DESIGN ENGINEER,BATCH-001. 3-months in NSIC-TSC. During his training period he gained rich practical knowledge in Electronics subject like circuit assembling & testing, production techinique,Quality control techinique,R&D technique, soldering technics PC hardware & Networking, circuit assembling & testing , PCB designing , SMD techniques , soldering , Fiber Optic Cable Interconnecting with splicing machine.


PRESENT STATUS:

Presently Sh. Gaddamedi Devanand r working as a Technician in BHAGAWATI PRODUCTS LIMITED, Hyderabad. and he is drawn salary 9000/- per month. He feels happy, and said thanks to NSIC.


Name of the Trainee: Mr. Gandham Srinidhu

Father’s Name: Suresh


FAMILY BACKGROUND:

Gandham Srinidhu son of :suresh. belongs to an average family from a rural background and lives in a very small village. He underwent MEPMA DESIGN ENGINEER,BATCH-001. 3-months in NSIC-TSC. During his training period he gained rich practical knowledge in Electronics subject like circuit assembling & testing, production techinique,Quality control techinique,R&D technique, soldering technics PC hardware & Networking, circuit assembling & testing , PCB designing , SMD techniques , soldering , Fiber Optic Cable Interconnecting with splicing machine.


PRESENT STATUS:

Presently Sh. Gandham Srinidhu working as a Technician in BHAGAWATI PRODUCTS LIMITED, Hyderabad. and he is drawn salary 9000/- per month. He feels happy, and said thanks to NSIC.


Name of the Trainee: Mr. Gundemoni Saikrishn

Father’s Name: GUNDEMONI JANGAIAH


FAMILY BACKGROUND:

Gundemoni Saikrishna son of : GUNDEMONI JANGAIAH belongs to an average family from a rural background and lives in a very small village. He underwent MEPMA DESIGN ENGINEER,BATCH-001. 3-months in NSIC-TSC. During his training period he gained rich practical knowledge in Electronics subject like circuit assembling & testing, production techinique,Quality control techinique,R&D technique, soldering technics PC hardware & Networking, circuit assembling & testing , PCB designing , SMD techniques , soldering , Fiber Optic Cable Interconnecting with splicing machine.


PRESENT STATUS:

Presently Sh. . Gundemoni Saikrishna working as a Technician in BHAGAWATI PRODUCTS LIMITED, Hyderabad. and he is drawn salary 9000/- per month. He feels happy, and said thanks to NSIC.


Name of the Trainee: Mr.Kadem Ramu

Father’s Name: KADEM KOTAIAH


FAMILY BACKGROUND:

Kadem Ramu son of : KADEM KOTAIAH belongs to an average family from a rural background and lives in a very small village. He underwent MEPMA DESIGN ENGINEER,BATCH-001. 3-months in NSIC-TSC. During his training period he gained rich practical knowledge in Electronics subject like circuit assembling & testing, production techinique,Quality control techinique,R&D technique, soldering technics PC hardware & Networking, circuit assembling & testing , PCB designing , SMD techniques , soldering , Fiber Optic Cable Interconnecting with splicing machine.


PRESENT STATUS:

Presently Sh. . Kadem Ramu working as a Technician in BHAGAWATI PRODUCTS LIMITED, Hyderabad. and he is drawn salary 9000/- per month. He feels happy, and said thanks to NSIC.


Name of the Trainee: Janampet Yadagiri

Father’s Name: J Anjaiah Goud

Address; H-No-2-69, Kundanna Guda, Farooq Nagar, rangareddy, RANGA REDDY, Telangana, India


FAMILY BACKGROUND:

Janampet Yadagiri son of : KADEM KOTAIAH belongs to an average family from a rural background and lives in a very small village. He underwent MEPMA DESIGN ENGINEER,BATCH-002. 3-months in NSIC-TSC. During his training period he gained rich practical knowledge in Electronics subject like circuit assembling & testing, production techinique,Quality control techinique,R&D technique, soldering technics PC hardware & Networking, circuit assembling & testing , PCB designing , SMD techniques , soldering , Fiber Optic Cable Interconnecting with splicing machine.


PRESENT STATUS:

Presently Sh.Janampet Yadagiri working as a Technician in BHAGAWATI PRODUCTS LIMITED, Hyderabad. and he is drawing salary 9000/- per month. He feels happy, and said thanks to NSIC.


Name of the Trainee: Mr. P Satyam Naik

Father’sName: Pv Vnkatesh Naik

Address; 10-5-826/8ff, Addagutta, tukaram Gate, Hyd., HYDERABAD, Telangana, India.


FAMILY BACKGROUND:

P Satyam Naik son Pv Vnkatesh Naik belongs to an average family from a rural background and lives in a very small village. He underwent MEPMA DESIGN ENGINEER,BATCH-001. 3-months in NSIC-TSC. During his training period he gained rich practical knowledge in Electronics subject like circuit assembling & testing, production techinique,Quality control techinique,R&D technique, soldering technics PC hardware & Networking, circuit assembling & testing , PCB designing , SMD techniques , soldering , Fiber Optic Cable Interconnecting with splicing machine.

After successful completion of his course he got a placement in BHAGAWATI PRODUCTS LIMITED Hyderabad.

PRESENT STATUS:

Presently Sh P Satyam Naik working as a Technician in BHAGAWATI PRODUCTS LIMITED and he is drawing salary 9000/- per month. He feels happy, and said thanks to NSIC.


Name of the Trainee: Mr MOHAMMED RAHEEL

Father’sName: MOHAMMED SARWAR PASHA


FAMILY BACKGROUND:

MOHAMMED RAHEEL son MOHAMMED SARWAR PASHA belongs to an average family from a rural background and lives in a very small village. He underwent MEPMA DESIGN ENGINEER,BATCH-001. 3-months in NSIC-TSC. During his training period he gained rich practical knowledge in Electronics subject like circuit assembling & testing, production techinique,Quality control techinique,R&D technique, soldering technics PC hardware & Networking, circuit assembling & testing , PCB designing , SMD techniques , soldering , Fiber Optic Cable Interconnecting with splicing machine.

After successful completion of his course he got a placement in REXPACK PACKAGING MACHINES Hyderabad.

PRESENT STATUS:

Presently Sh MOHAMMED RAHEEL working as a Technician in REXPACK PACKAGING MACHINES and he is drawing salary 8500/- per month. He feels happy, and said thanks to NSIC.


Name of the Trainee: Mr K. SHIVA KUMAR

Father’sName: Kothapally Shervaiah

Adress: H-No-7-10, Alinagar, Pochampur, yadadri, Pin-508284, Nalgonda, Telangana, India


FAMILY BACKGROUND:

K. SHIVA KUMAR son Kothapally Shervaiah belongs to an average family from a rural background and lives in a very small village. He underwent MEPMA DESIGN ENGINEER,BATCH-001. 3-months in NSIC-TSC. During his training period he gained rich practical knowledge in Electronics subject like circuit assembling & testing, production techinique,Quality control techinique,R&D technique, soldering technics PC hardware & Networking, circuit assembling & testing , PCB designing , SMD techniques , soldering , Fiber Optic Cable Interconnecting with splicing machine.


PRESENT STATUS:

Presently Sh K. SHIVA KUMAR working as a Technician in BHAGAWATI PRODUCTS LIMITED, and he is drawing salary 8000/- per month. He feels happy, and said thanks to NSIC.


Name of the Trainee: Mr Kandela Sai Teja

Father’sName: Kandela Sudershan

Adress: H-No-3-3-583/4, Saipriya Nagar, nizamabad, Pin-503001, NIZAMABAD, Telangana, India


FAMILY BACKGROUND:

Kandela Sai Teja son Kandela Sudershan belongs to an average family from a rural background and lives in a very small village. He underwent MEPMA DESIGN ENGINEER,BATCH-001. 3-months in NSIC-TSC. During his training period he gained rich practical knowledge in Electronics subject like circuit assembling & testing, production techinique,Quality control techinique,R&D technique, soldering technics PC hardware & Networking, circuit assembling & testing , PCB designing , SMD techniques , soldering , Fiber Optic Cable Interconnecting with splicing machine.


PRESENT STATUS:

Presently Sh Kandela Sai Teja working as a Technician in BHAGAWATI PRODUCTS LIMITED, and he is drawing salary 8000/- per month. He feels happy, and said thanks to NSIC.


Name of the Trainee: Ms. Penjuveevi Venkata Karishma

Father’sName: Penjuveevi Krishna Murth

Adress: 4-144, Maruthi Nagar, Malkajgiri, hyd-500047, HYDERABAD, Telangana, India


FAMILY BACKGROUND:

Penjuveevi Venkata Karishma daughter Penjuveevi Krishna Murth belongs to an average family from a rural background and lives in a very small village. she underwent Mepma Through Hole Assembly Operator Batch -001. 3-months in NSIC-TSC. During her training period she gained rich practical knowledge in Electronics subject like circuit assembling & testing, production techinique,Quality control techinique,R&D technique, soldering technics PC hardware & Networking, circuit assembling & testing , PCB designing , SMD techniques , soldering , Fiber Optic Cable Interconnecting with splicing machine.

.

PRESENT STATUS:

Presently Penjuveevi Venkata Karishma working as a Technician TV MEDIA and she is drawing salary 8000/- per month. she TV MEDIA

feels happy, and said thanks to NSIC.


Name of the Trainee: Mr Mohammad Aslam Pasha

Father’sName: Mohammad Mahaboob Pasha

Adress: H.No:-46-8-51, Sundaraiah Nagar, WARANGAL, Telangana, India


FAMILY BACKGROUND:

Mohammad Aslam Pasha son Mohammad Mahaboob Pasha belongs to an average family from a rural background and lives in a very small village. He underwent MEPMA DESIGN ENGINEER,BATCH-001. 3-months in NSIC-TSC. During his training period he gained rich practical knowledge in Electronics subject like circuit assembling & testing, production techinique,Quality control techinique,R&D technique, soldering technics PC hardware & Networking, circuit assembling & testing , PCB designing , SMD techniques , soldering , Fiber Optic Cable Interconnecting with splicing machine.

PRESENT STATUS:

Presently Sh Mohammad Aslam Pasha working as a Technician in BHAGAWATI PRODUCTS LIMITED, and he is drawing salary 9000/- per month. He feels happy, and said thanks to NS


Name of the Trainee: Mr Vanga Vedamanikanta

Father’sName: Bhoomaiah

Adress: H.No:-5-77, Eligaid, Paddapalli,, Karimnagar, Telangana, India


FAMILY BACKGROUND:

Vanga Vedamanikanta son Bhoomaiah belongs to an average family from a rural background and lives in a very small village. He underwent MEPMA DESIGN ENGINEER,BATCH-002. 3-months in NSIC-TSC. During his training period he gained rich practical knowledge in Electronics subject like circuit assembling & testing, production techinique,Quality control techinique,R&D technique, soldering technics PC hardware & Networking, circuit assembling & testing , PCB designing , SMD techniques , soldering , Fiber Optic Cable Interconnecting with splicing machine.

PRESENT STATUS:

Presently Sh Vanga Vedamanikanta working as a Technician in ANALOGICS TECH.INDIA LTD

and he is drawing salary 9000/- per month. He feels happy, and said thanks to NSIC.


Name of the Trainee: Mr Mahadevuni Ajay

Father’sName: Kanakaiah

Adress: H.No:-9-86, Manakandur, Karimnagar , Karimnagar, Telangana, India


FAMILY BACKGROUND:

Mahadevuni Ajay son Kanakaiah belongs to an average family from a rural background and lives in a very small village. He underwent MEPMA DESIGN ENGINEER,BATCH-002. 3-months in NSIC-TSC. During his training period he gained rich practical knowledge in Electronics subject like circuit assembling & testing, production techinique,Quality control techinique,R&D technique, soldering technics PC hardware & Networking, circuit assembling & testing , PCB designing , SMD techniques , soldering , Fiber Optic Cable Interconnecting with splicing machine.

PRESENT STATUS:

Presently Sh Mahadevuni Ajay working as a Technician in BHAGAWATI PRODUCTS LIMITED, and he is drawing salary 9000/- per month. He feels happy, and said thanks to NSIC.


Name of the Trainee: Mr Janagam Vikram

Father’sName: Janagam Ravi

Adress: H.No:-2-40, Siddhapur, Hasanparthy-506006, WARANGAL, Telangana, India


FAMILY BACKGROUND:

Janagam Vikram son Janagam Ravi belongs to an average family from a rural background and lives in a very small village. He underwent MEPMA DESIGN ENGINEER,BATCH-002. 3-months in NSIC-TSC. During his training period he gained rich practical knowledge in Electronics subject like circuit assembling & testing, production techinique,Quality control techinique,R&D technique, soldering technics PC hardware & Networking, circuit assembling & testing , PCB designing , SMD techniques , soldering , Fiber Optic Cable Interconnecting with splicing machine.

PRESENT STATUS:

Presently Sh Janagam Vikram working as a Technician in BHAGAWATI PRODUCTS LIMITED, and he is drawing salary 9000/- per month. He feels happy, and said thanks to NSIC.


Name of the Trainee: Mr S Sai Chandra Father’sName: S Hari Keshavulu Adress: Pl-No-17-1-388/20, Laxminagar, saidabad, Hyd-500059, HYDERABAD, Telangana, India Contact Number: 7386735035

FAMILY BACKGROUND:

S Sai Chandra son S Hari Keshavulu belongs to an average family from a rural background and lives in a very small village. He underwent MEPMA DESIGN ENGINEER,BATCH-001. 3-months in NSIC-TSC. During his training period he gained rich practical knowledge in Electronics subject like circuit assembling & testing, production techinique,Quality control techinique,R&D technique, soldering technics PC hardware & Networking, circuit assembling & testing , PCB designing , SMD techniques , soldering , Fiber Optic Cable Interconnecting with splicing machine.

PRESENT STATUS:

Presently S Sai Chandra working as a Technician in BHAGAWATI PRODUCTS LIMITED, and he is drawing salary 9000/- per month. He feels happy, and said thanks to NSIC.


Name of the Trainee: Mr Rondla Karthik Reddy Father’sName: Rondla Ram Reddy Adress: 2-2015/3/D, Chilkanagar, Uppal, hyd-500039, HYDERABAD, Telangana, India Contact Number: 9515904342

FAMILY BACKGROUND:

Rondla Karthik Reddy son Rondla Ram Reddy belongs to an average family from a rural background and lives in a very small village. He underwent MEPMA DESIGN ENGINEER, BATCH-001. 3-months in NSIC-TSC. During his training period he gained rich practical knowledge in Electronics subject like circuit assembling & testing, production techinique,Quality control techinique,R&D technique, soldering technics PC hardware & Networking, circuit assembling & testing , PCB designing , SMD techniques , soldering , Fiber Optic Cable Interconnecting with splicing machine.

PRESENT STATUS:

Presently Rondla Karthik Reddy working as a Technician in BHAGAWATI PRODUCTS LIMITED, and he is drawing salary 9000/- per month. He feels happy, and said thanks to NSIC.


Name of the Trainee: Mr Ramavath Hariprasad Father’sName: Bashya Adress: 5-124, Meerpet, Balapur, r.R.Dist., Pin-500097, RANGA REDDY, Telangana, India Contact Number: 8019331361

FAMILY BACKGROUND:

Ramavath Hariprasad son Bashya belongs to an average family from a rural background and lives in a very small village. He underwent MEPMA DESIGN ENGINEER, BATCH-001. 3-months in NSIC-TSC. During his training period he gained rich practical knowledge in Electronics subject like circuit assembling & testing, production techinique,Quality control techinique,R&D technique, soldering technics PC hardware & Networking, circuit assembling & testing , PCB designing , SMD techniques , soldering , Fiber Optic Cable Interconnecting with splicing machine.

PRESENT STATUS:

Presently Ramavath Hariprasad working as a Technician in BHAGAWATI PRODUCTS LIMITED, and he is drawing salary 9000/- per month. He feels happy, and said thanks to NSIC.


Name of the Trainee: Mr Nangunuri Naga Vasantha Kumar Father’sName: Nangunuri Srinivasa Rao Adress: Uppalachalaka (V), Penubally (M), khammam, KAMMAM, Telangana, India Contact Number: 9705964157

FAMILY BACKGROUND:

Nangunuri Naga Vasantha Kumar son Nangunuri Srinivasa Rao belongs to an average family from a rural background and lives in a very small village. He underwent MEPMA DESIGN ENGINEER, BATCH-001. 3-months in NSIC-TSC. During his training period he gained rich practical knowledge in Electronics subject like circuit assembling & testing, production techinique,Quality control techinique,R&D technique, soldering technics PC hardware & Networking, circuit assembling & testing , PCB designing , SMD techniques , soldering , Fiber Optic Cable Interconnecting with splicing machine.

PRESENT STATUS:

Presently Nangunuri Naga Vasantha Kumar working as a Technician in BHAGAWATI PRODUCTS LIMITED, and he is drawing salary 9000/- per month. He feels happy, and said thanks to NSIC.


Name of the Trainee: Mr Jakkula Rakesh Father’sName: Jangili Yadagiri Adress: 3-5-24/72, Bakshiguda Colony, aphb Colony, Moula-Ali, Hyd-500040, HYDERABAD, Telangana, India Contact Number: 9640865707

FAMILY BACKGROUND:

Jakkula Rakesh son Jangili Yadagiri belongs to an average family from a rural background and lives in a very small village. He underwent MEPMA DESIGN ENGINEER, BATCH-001. 3-months in NSIC-TSC. During his training period he gained rich practical knowledge in Electronics subject like circuit assembling & testing, production techinique,Quality control techinique,R&D technique, soldering technics PC hardware & Networking, circuit assembling & testing , PCB designing , SMD techniques , soldering , Fiber Optic Cable Interconnecting with splicing machine.

PRESENT STATUS:

Presently Jakkula Rakesh working as a Technician in BHAGAWATI PRODUCTS LIMITED, and he is drawing salary 9000/- per month. He feels happy, and said thanks to NSIC.


Name of the Trainee: Mr Enagandula Venkatesh Father’sName: Rammurthy Adress: 2-62/8, Muppirithota, Eligedu (M), karimnagar, Pin-505525, Karimnagar, Telangana, India Contact Number: 800859352

FAMILY BACKGROUND:

Enagandula Venkatesh son Rammurthy belongs to an average family from a rural background and lives in a very small village. He underwent MEPMA DESIGN ENGINEER, BATCH-001. 3-months in NSIC-TSC. During his training period he gained rich practical knowledge in Electronics subject like circuit assembling & testing, production techinique,Quality control techinique,R&D technique, soldering technics PC hardware & Networking, circuit assembling & testing , PCB designing , SMD techniques , soldering , Fiber Optic Cable Interconnecting with splicing machine.

PRESENT STATUS:

Presently Enagandula Venkatesh working as a Technician in BHAGAWATI PRODUCTS LIMITED, and he is drawing salary 9000/- per month. He feels happy, and said thanks to NSIC.


Name of the Trainee: Mr Chigurla Ranjith Father’sName: Ch Venkanna Adress: H-No-3-97, Kasarlapahad, Jajireddy Gudem, nalgonda, Pin-508222, Nalgonda, Telangana, India Contact Number: 8179844217

FAMILY BACKGROUND:

Chigurla Ranjith son Ch Venkanna belongs to an average family from a rural background and lives in a very small village. He underwent MEPMA DESIGN ENGINEER, BATCH-001. 3-months in NSIC-TSC. During his training period he gained rich practical knowledge in Electronics subject like circuit assembling & testing, production techinique,Quality control techinique,R&D technique, soldering technics PC hardware & Networking, circuit assembling & testing , PCB designing , SMD techniques , soldering , Fiber Optic Cable Interconnecting with splicing machine.

PRESENT STATUS:

Presently Chigurla Ranjith working as a Technician in BHAGAWATI PRODUCTS LIMITED, and he is drawing salary 9000/- per month. He feels happy, and said thanks to NSIC.


Name of the Trainee: Mr Veeraveni Raju Father’sName: Veeraveni Sammaia Adress: 3-22, Venkatraopally, Tekumatla, Jayashankar, Pin-506356, WARANGAL, Telangana, India Contact Number: 7702179581

FAMILY BACKGROUND:

Veeraveni Raju son Veeraveni Sammaia belongs to an average family from a rural background and lives in a very small village. He underwent MEPMA DESIGN ENGINEER, BATCH-002. 3-months in NSIC-TSC. During his training period he gained rich practical knowledge in Electronics subject like circuit assembling & testing, production techinique,Quality control techinique,R&D technique, soldering technics PC hardware & Networking, circuit assembling & testing , PCB designing , SMD techniques , soldering , Fiber Optic Cable Interconnecting with splicing machine.

PRESENT STATUS:

Presently Veeraveni Raju working as a Technician in VEM TECHNOLOGIES PVT.LTD

and he is drawing salary 10500/- per month. He feels happy, and said thanks to NSIC.


Name of the Trainee: Samala Ramya

Father’s Name: Samala Laxminarayana

Adress: H-No-15-43, Choppadandi, Karimnagar, pin-505415, Karimnagar, Telangana, India


FAMILY BACKGROUND:

Samala Ramya daughter of Samala Laxminarayana belongs to an average family from a rural background and lives in a very small village. She underwent MEPMA MASTER CERTIFICATE COURSE IN ELECTRONICS, BATCH-001. 3-months in NSIC-TSC. During her training period she gained rich practical knowledge in Electronics subject like circuit assembling & testing, production techinique,Quality control techinique,R&D technique, soldering technics PC hardware & Networking, circuit assembling & testing , PCB designing , SMD techniques , soldering , Fiber Optic Cable Interconnecting with splicing machine.

PRESENT STATUS:

Presently Samala Ramya working as a Technician in BHAGAWATI PRODUCTS LIMITED

and she is drawn salary 9000/- per month. She feels happy, and said thanks to NSIC.


Name of the Trainee: Ms. Thatikonda Lavanya

Father’s Name: Kotaiah

Adress: H-No-3-12, Katikenapally, dharmaram, Peddapally, Pin-505416, PEDDAPALLI, Telangana, India


FAMILY BACKGROUND:

Thatikonda Lavanya daughter of Kotaiah belongs to an average family from a rural background and lives in a very small village. She underwent MEPMA MASTER CERTIFICATE COURSE IN ELECTRONICS, BATCH-001. 3-months in NSIC-TSC. During her training period she gained rich practical knowledge in Electronics subject like circuit assembling & testing, production techinique,Quality control techinique,R&D technique, soldering technics PC hardware & Networking, circuit assembling & testing , PCB designing , SMD techniques , soldering , Fiber Optic Cable Interconnecting with splicing machine.

PRESENT STATUS:

Presently Thatikonda Lavanya working as a Technician in BHAGAWATI PRODUCTS LIMITED



Name of the Trainee: Ms. Ninavath Susheela Bai

Father’s Name: Ninavath Hari

Adress: 2-50/1, Akanpally (V), Maheshwaram, rangareddy, RANGA REDDY, Telangana, India


FAMILY BACKGROUND:

Ninavath Susheela Bai daughter of Ninavath Hari belongs to an average family from a rural background and lives in a very small village. She underwent MEPMA Through Hole Assembly Operator, BATCH-001. 3-months in NSIC-TSC. During her training period she gained rich practical knowledge in Electronics subject like circuit assembling & testing, production techinique,Quality control techinique,R&D technique, soldering technics PC hardware & Networking, circuit assembling & testing , PCB designing , SMD techniques , soldering , Fiber Optic Cable Interconnecting with splicing machine.

PRESENT STATUS:

Presently Ninavath Susheela Bai working as a Technician in TV MEDA and she is drawn salary 8000/- per month. She feels happy, and said thanks to NSIC.


Name of the Trainee: Ms. P. Madhumitha

Father’s Name: P. Sathyanarayana

Adress: H.No:-2-9-16, kotha Basthi, Bolarum, HYDERABAD, Telangana, India


FAMILY BACKGROUND:

P. Madhumitha daughter of P. Sathyanarayana belongs to an average family from a rural background and lives in a very small village. She underwent MEPMA DESIGN ENGINEER, BATCH-002. 3-months in NSIC-TSC. During her training period she gained rich practical knowledge in Electronics subject like circuit assembling & testing, production techinique,Quality control techinique,R&D technique, soldering technics PC hardware & Networking, circuit assembling & testing , PCB designing , SMD techniques , soldering , Fiber Optic Cable Interconnecting with splicing machine.

PRESENT STATUS:

Presently P. Madhumitha working as a Technician in BHAGAWATI PRODUCTS LIMITED



Name of the Trainee: Ms. Kotte Aparna Reddy

Father’s Name: Kotte Raja Reddy

Adress: H.No:-8-3-351/1, Sapthagiri Colony, Karimnagar , Karimnagar, Telangana, India


FAMILY BACKGROUND:

Kotte Aparna Reddy daughter of Kotte Raja Reddy belongs to an average family from a rural background and lives in a very small village. She underwent MEPMA DESIGN ENGINEER, BATCH-002. 3-months in NSIC-TSC. During her training period she gained rich practical knowledge in Electronics subject like circuit assembling & testing, production techinique,Quality control techinique,R&D technique, soldering technics PC hardware & Networking, circuit assembling & testing , PCB designing , SMD techniques , soldering , Fiber Optic Cable Interconnecting with splicing machine.

PRESENT STATUS:

Presently Kotte Aparna Reddy working as a Technician in BHAGAWATI PRODUCTS LIMITED and she is drawn salary 9000/- per month. She feels happy, and said thanks to NSIC.


Name of the Trainee: Ms. Guda Anjali

Father’s Name: G. Kumaraswamy

Adress: H.No:-19-2 khadharpet,(Vi),Chennaraopet(M), , WARANGAL, Telangana, India


FAMILY BACKGROUND:

Ms. Guda Anjali daughter of G. Kumaraswamy belongs to an average family from a rural background and lives in a very small village. She underwent MEPMA DESIGN ENGINEER, BATCH-002. 3-months in NSIC-TSC. During her training period she gained rich practical knowledge in Electronics subject like circuit assembling & testing, production techinique,Quality control techinique,R&D technique, soldering technics PC hardware & Networking, circuit assembling & testing , PCB designing , SMD techniques , soldering , Fiber Optic Cable Interconnecting with splicing machine.

PRESENT STATUS:

Presently Ms. Guda Anjali working as a Technician in BHAGAWATI PRODUCTS LIMITED and she is drawn salary 9000/- per month. She feels happy, and said thanks to NSIC.


Name of the Trainee: Ms. Balpunuri Mounika

Father’s Name: Balpunuri Gurva Reddy

Adress: Amaravaram(Vi), Huzur Nagar(M), suryapet, Nalgonda, Telangana, India


FAMILY BACKGROUND:

Ms. Balpunuri Mounika daughter Balpunuri Gurva Reddy belongs to an average family from a rural background and lives in a very small village. She underwent MEPMA DESIGN ENGINEER, BATCH-002. 3-months in NSIC-TSC. During her training period she gained rich practical knowledge in Electronics subject like circuit assembling & testing, production techinique,Quality control techinique,R&D technique, soldering technics PC hardware & Networking, circuit assembling & testing , PCB designing , SMD techniques , soldering , Fiber Optic Cable Interconnecting with splicing machine.

PRESENT STATUS:

Presently Balpunuri Mounika working as a Technician in BHAGAWATI PRODUCTS LIMITED and she is drawn salary 7500/- per month. She feels happy, and said thanks to NSIC.


Name of the Trainee: Ms. Aileni Divya

Father’s Name: Anjireddy

Adress: 2-64, Bathikepally, Pedapally, jagityal, PEDDAPALLI, Telangana, India


FAMILY BACKGROUND:

Aileni Divya daughter of Anjireddy belongs to an average family from a rural background and lives in a very small village. She underwent MEPMA DESIGN ENGINEER, BATCH-001. 3-months in NSIC-TSC. During her training period she gained rich practical knowledge in Electronics subject like circuit assembling & testing, production techinique,Quality control techinique,R&D technique, soldering technics PC hardware & Networking, circuit assembling & testing , PCB designing , SMD techniques , soldering , Fiber Optic Cable Interconnecting with splicing machine.

PRESENT STATUS:

Presently Aileni Divya working as a Technician in BHAGAWATI PRODUCTS LIMITED and she is drawn salary 9000/- per month. She feels happy, and said thanks to NSIC.

SuCCESS SToRIES - NSIC

Documents

Transcript of SuCCESS SToRIES - NSIC