STEEL PRODUCT GUIDE

45
superiorsteel.com.au STEEL PRODUCT GUIDE

Transcript of STEEL PRODUCT GUIDE

superiorsteel.com.auSTEEL PRODUCT GUIDE

End Coding Chart 1Precision Tube 2 Square Hallow Sections (SHS)SHS - Gal & Painted 3-4Rectangular Hallow Section (RHS) RHS - Gal & Painted 5-6Circular Hallow Sctions (CHS) PIPE - Gal 6-7Line Pipe 8PIPE - ERW Gal Fence Pipe 9Rail - Oval Rail 9Dura Gal Profiles 10Flats 10Angles 10Channels 10Mild Steel 11Flats Mild Steel 11-13Round Mild Steel 14 Deformed Bar 14 Square Mild Steel 14 Equal Angles 15-16Unequal Angles 16Parallel Flanged Channel (PFC) 17Universal Columns (UC s̀) 18Welded Columns (WC) 18Universal Beams (UB s̀) 19Welded Beams (WB s̀) 20Tapered Flanged Beams 20Plates & Sheet 21Plain Plates 21 Floor Plates 22Cold Form Sections 23Cold Form Channels, Plain & Lipped 23Cold Form Angles / Gal Lintels 24Grid Mesh (WK) 25Galv Mesh 26Reo Mesh 26Handyman Mesh 26Purlins C&Z / Purlin Dimensions 27A&BSteel Sheet, HR, GB 28Trench Mesh 29Top Hats 29Bondek 29Stud. Plate. Nogg 29

Aluminium Sections 30Flats Angle Rounds 30Hollows & Tubes 31Telescope Chart 32Chainwire & Fence Fittings 33Roofing Chart 34Flashings 35Other Information 36Manufacturing Standards / Grades / Tolerances 36ALength Capabilities 36AFinishes 37Gauge Converter 38Contact Details Back

Nerang 07 5596 3344 | Jimboomba 07 5546 9122

Nerang 07 5596 3344 | Jimboomba 07 5546 9122 1

Nerang 07 5596 3344 | Jimboomba 07 5546 9122 2

Gal

Nerang 07 5596 3344 | Jimboomba 07 5546 9122 3

Gal

1315

1315 1.8x x

1.8

Nerang 07 5596 3344 | Jimboomba 07 5546 9122 4

Gal products are light galvanised steel sections that offer the advantage of better protection against the elements over traditional primer painted products. Available in flats, angles, channels, square, rectangular, circular and rail sections.Gal products are manufactured using a fully hot - dip galvanised steel strip. This means that Gal hollows are galvanised on the inside as well as the outside.Gal products are manufactured to stringent Australian Standards to comply with AS/NZS 4972 (section 3) so you’re protected no matter which way you look at it.Gal material is used in a wide variety of applications, limited only by your imagination and no special processes are required for preparation welding or top coats and can be powder coated without difficulty.

GAL RANGE

Gal

Some items below come in 9, 10 & 12 metre lengths

2.0

2.0

Nerang 07 5596 3344 | Jimboomba 07 5546 9122 5

Gal

Nerang 07 5596 3344 | Jimboomba 07 5546 9122 6

Gal

2.0

Gal

Some items below come in 9, 10 & 12 metre lengths

Standard lengths 6.5msome items can come in 7.2m

Nerang 07 5596 3344 | Jimboomba 07 5546 9122 7

Gal

Some items below come in 7.2 metre lengths

Compliant with AS/NZS 1163/1074 Grade : C350L0/C250

Nerang 07 5596 3344 | Jimboomba 07 5546 9122 8

Line Pipe

OD Thickness Item Name Weight

mm m kg/m

76.1 x 4.0 x 6.0 MTR GRADE 350 7.17

76.1 x 5.0 ERW LINEPIPE x 12 8.83

88.9 x 4.0 ERW LINEPIPE x 12 8.41

88.9 x 5.5 ERW LINEPIPE x 12 11.33

114.3 x 4.8 ERW LINEPIPE x 12 13

114.3 x 6.02 ERW LINEPIPE x 12 16.08

127.0 x 6.0 ERW LINEPIPE x 12 17.91

141.3 x 4.8 ERW LINEPIPE x 12 16.16

141.3 x 6.02 ERW LINEPIPE x 12 20.08

141.3 x 9.53 ERW LINEPIPE x 12 31

168.3 x 4.8 ERW LINEPIPE x 12 19.33

168.3 x 6.4 ERW LINEPIPE x 12 25.58

168.3 x 7.11 ERW LINEPIPE x 12 28.25

168.3 x 10.97 ERW LINEPIPE x 12 42.58

219.1 x 4.8 ERW LINEPIPE x 12 25.33

219.1 x 6.4 ERW LINEPIPE x 12 33.58

219.1 x 8.2 ERW LINEPIPE x 12 42.66

273.1 x 6.4 ERW LINEPIPE x 12 42.08

273.1 x 9.27 ERW LINEPIPE x 12 60.33

323.9 x 6.35 ERW LINEPIPE x 12 50.08

323.9 x 9.52 ERW LINEPIPE x 12 73.91

406.4 x 9.53 ERW LINEPIPE x 12 93.25

Nerang 07 5596 3344 | Jimboomba 07 5546 9122 9

Gal

Items below limited availability

Nerang 07 5596 3344 | Jimboomba 07 5546 9122 10

Some items below come in 9 metre lengths

Some items below come in 9 metre lengths

Angles Dura GalCompliant with AS/NZS 3679.1-300 - Grade: 350L0

Channels Dura GalCompliant with AS/NZS 3679.1-300 - Grade: 350LO

Dura Gal Range

2.5

Nerang 07 5596 3344 | Jimboomba 07 5546 9122 11

Nerang 07 5596 3344 | Jimboomba 07 5546 9122 12

Nerang 07 5596 3344 | Jimboomba 07 5546 9122 13

Nerang 07 5596 3344 | Jimboomba 07 5546 9122 14

Nerang 07 5596 3344 | Jimboomba 07 5546 9122 15

Some items below come in 7.5, 9, 10 &12 metre lengths

Nerang 07 5596 3344 | Jimboomba 07 5546 9122 16

Some items below come in 9, 10 & 12 metre lengths

Some items below come in 9, 10 & 12 metre lengths

Nerang 07 5596 3344 | Jimboomba 07 5546 9122 17

Here at Superior Steel Supplies & Ashmore Welding we strive our business on service and providing a “One Stop Shop” for all customers. From big corporation to the local home handy man, they will always get the same attention.

It has always been a Company policy if we don’t stock the item, we will source it. At Superior Steel Supplies & Ashmore Welding Pty Ltd , our friendly team have many years of experience and offer this knowledge to ensure all customers receive the correct advice, and more importantly, attention to detail you deserve to receive the right products at the most competitive price on time everytime.

Talk to Ashmore Welding’s internal estimators about your next fabricated project, we offer a full in-house drafting service to ensure your project is monitored from start to finish and the end product being to the highest level of accuracy.

When it comes to decision making, flexibility and on the spot service, our team is better equipped to give you the solutions you need in the best possible time frame.

Available in 9, 10.5,12,13.5, 15, 16.5 & 18 metre lengths

SERVICE

External Surface Area

per metrem2 /m

0.296

0.385

0.494

0.579

0.638

0.678

0.737

0.834

0.932

1.13

A

D

C

B

Nerang 07 5596 3344 | Jimboomba 07 5546 9122 18

Available in 9, 10.5,12,13.5, 15, 16.5 & 18 metre lengths

Available in 9, 10.5,12,13.5, 15, 16.5 & 18 metre lengths

External Surface Area

per metrem2 /m

0.5630.8850.8990.9081.181.191.221.481.5

1.791.811.821.84

A

D

C

B

Nerang 07 5596 3344 | Jimboomba 07 5546 9122 19

FREE ESTIMATING & COSTING, your next job, at Superior Steel & Ashmore Welding we have always offered a full processing service which includes a cut to length policy. In addition all locations provide full cutting service, square cuts or mitre cuts, drilling, welding, punching and Installation if required. Whether it’s a single cut or a large project, Superior Steel Supplies & Ashmore Welding can estimate and quote from your plans ensuring you maximise savings by minimising waste.Our in house shop equipment consists of an Over Head Crane, a 80 ton & 45 Ton Cropping Machines, a full automatic Bandsaw for pack cutting standard bundles of steel products. Two Brobo cutting saws for precision cutting, and two other Bandsaws to cope with our daily influx of customers for on the spot cutting. Linishing Machines, multiple magnetic drills, pedestal drills, lathes, a guillotine (cutting capacity up to 6mm plate) Ashmore Welding has 10 workstations for all welding needs, with the capability of producing up to 200 Ton projects.Superior Steel Supplies & Ashmore Welding have access to the latest Industry technology when it comes to large detailed projects, being the latest beam lines, which ensures speedy turnaround times with the most accurate processed products. If your project requires a special sandblasted and painted finish, or a Hot Dip Galvanized finish, we will arrange this for you.

Available in 9, 10.5,12,13.5, 15, 16.5 & 18 metre lengths

PROCESSING

A

D

C

B

External Surface Area

per metrem2 /m

Depth Between Flange

mm

0.576 1360.584 1360.682 1590.685 1590.691 1590.764 1840.91 188

0.912 1880.922 1880.961 2321.06 2341.07 2341.16 2821.24 2841.25 2841.35 3331.36 3331.37 3331.48 3811.49 3811.63 4281.64 4281.65 4281.85 5021.86 5022.07 5722.08 5722.09 572

Nerang 07 5596 3344 | Jimboomba 07 5546 9122 20

Available in 9, 10.5,12,13.5, 15, 16.5 & 18 metre lengths

A

D

C

B

Nerang 07 5596 3344 | Jimboomba 07 5546 9122 21

Nerang 07 5596 3344 | Jimboomba 07 5546 9122 22

Floor PlateUntrimmed Mill Edge AS/NZS 1594 - HA250 (Cut ex Coil).

Floor Plate (GALV)

Masskg/sht

2440 x 1220 x 1.6 mm 372440 x 1220 x 2.1 mm 472440 x 1220 x 3.0 mm 70

Nerang 07 5596 3344 | Jimboomba 07 5546 9122 23

Cold Formed Plain Channels

Item Name Web x Flange x Thickness Weight

mm kg/m

LC01916 19 x 13 x 1.5 0.49

LC02516 25 x 13 x 1.5 0.58

LC03816 38 x 16 x 1.5 0.84

LC05116 51 x 15 x 1.5 0.97

LC05130 51 x 25 x 3.0 2.15

LC05725 57 x 26 x 2.5 2.00

LC06425 64 x 23 x 2.5 2.00

LC07630 76 x 38 x 3.0 3.34

LC08330 83 x 34 x 3.0 3.34

LC08930 89 x 31 x 3.0 3.34

LC09530 95 x 37 x 3.0 3.70

LC10330 103 x 34 x 3.0 3.70

LC10230 102 x 55 x 3.0 5.78

LC12730 127 x 50 x 3.0 5.26

LC15230 152 x 51 x 3.0 5.86

Cold Formed Lipped Channels

Item Name Web x Flange x Lip Thickness Weight

mm mm kg/m

LL05116 51 x 35 x 12 1.5 1.68

LL06425 64 x 38 x 13 2.5 2.90

LL07610 76 x 44 x 11 1.0 1.43

LL07625 76 x 44 x 16 2.5 3.49

LL10225 102 x 51 x 18 2.5 4.39

LL10230 102 x 51 x 19 3.0 5.25

LL12725 127 x 51 x 18 2.5 4.89

LL12730 127 x 51 x 19 3.0 5.85

LL15230 152 x 64 x 21 3.0 7.16

LL20330 203 x 76 x 24 3.0 9.07

LL25430 254 x 89 x 25 3.0 10.98

Nerang 07 5596 3344 | Jimboomba 07 5546 9122 24

Cold Formed Angle

Item Name Web x Flange x Thickness Weight

mm kg/m

LA2725 27 x 27 x 2.5 1.00

LA3225 32 x 24 x 2.5 1.00

LA4030 40 x 40 x 3.0 1.79

LA4630 46 x 35 x 3.0 1.79

LA5130 51 x 30 x 3.0 1.79

Gal Lintels

Item Name Kg/m Lengths

85mm FLAT 5.00 0.800

85mm FLAT 5.00 0.900

85mm FLAT 5.00 1.000

85mm FLAT 5.00 1.100

85mm FLAT 5.00 1.200

100 x 100 ANGLE 9.50 0.900

100 x 100 ANGLE 9.50 1.400

100 x 100 ANGLE 9.50 1.500

100 x 100 ANGLE 9.50 1.700

100 x 100 ANGLE 9.50 1.800

100 x 100 ANGLE 9.50 2.000

100 x 100 ANGLE 9.50 2.100

100 x 100 ANGLE 9.50 2.400

100 x 100 ANGLE 9.50 2.700

150 x 100 ANGLE 12.00 1.800

150 x 100 ANGLE 12.00 2.100

150 x 100 ANGLE 12.00 2.400

150 x 100 ANGLE 12.00 2.700

150 x 100 ANGLE 12.00 3.000

150 x 100 ANGLE 12.00 3.300

150 x 100 ANGLE 12.00 3.600

150 x 100 ANGLE 12.00 4.000

Nerang 07 5596 3344 | Jimboomba 07 5546 9122 25

Gridwalk (Wk) – Steel

Mesh Reference

Standard Nominal Sheet

Sizes (mm)

Nominal Size of Mesh (mm)

Nominal Size of Mesh Opening

(mm)

Approx Strand Size (mm)

Weight Kg/m2

Overall Height (mm)

LW SW LWM SWM LWO SWO Width Height

GR50080 WK4514 * 3000 135 45 96 32 8.0 5.0 14.0 15.0

GR50110 WK4519 * 3000 135 45 96 32 11.0 5.0 19.0 21.0

GM50075 WK3022 * 3000 75 30 53 15 7.8 5.0 22.0 13.0

GM50105 WK3028 * 3000 75 30 50 12 10.5 5.0 28.0 15.0

WK3414 * 3000 120 34 85 24 6.4 5.0 14.0 13.0

WK3419 * 3000 120 34 84 23 8.4 5.0 19.0 16.0

WK3422 * 3000 120 34 80 19 9.6 5.0 22.0 18.0

WK3428 * 3000 120 80 19 10.4 6.0 19.0

WK2517 * 3000 60 42 16 5.6 5.0 11.0

WK2517F 1200 2400 60 44 15 5.6 5.0 5.0

*Gridwalk LW Standard Sizes 600, 750, 900 and 1200 Available in Mild Steel, Hot Dipped Galv. Stainless Steel available – conditions apply Gridwalk is galvanised to AS4680

Nerang 07 5596 3344 | Jimboomba 07 5546 9122 26

General Purpose Gal Mesh

Item Name Width Height Each

mm mm Kg

25 x 25 x 2.5 Gal Mesh 3000 2400 23

25 x 25 x 3.15 Gal Mesh 3000 2400 36

50 x 25 x 2.5 Gal Mesh 3000 2400 17

50 x 25 x 3.15 Gal Mesh 3000 2400 27

50 x 50 x 4 Gal Mesh 3000 2400 29

50 x 50 x 5 Gal Mesh 3000 2400 44

75 x 50 x 4 Gal Mesh 3000 2400 24

75 x 50 x 5 Gal Mesh 3000 2400 38

100 x 100 x 5 Gal Mesh 3000 2400 23

100 x 100 x 5.6 Gal Mesh 3000 2400 29

150 x 100 x 5.6 Gal Mesh 3000 2400 24.3

Reinforcing Mesh

Item Name Width mm Height mm Kg Each

F52 6000 2400 116

F62 6000 2400 89

F72 6000 2400 65

F82 6000 2400 52

F92 6000 2400 40

F102 6000 2400 33

F81 6000 2400 21

Mesh To Go

F62 4000 2000 18.00

F72 4000 2000 23.00

F82 4000 2000 30.00

Gal Handy Man .

Item Name Width mm Height mm Kg Each

25 x 25 x 2.5 Gal Mesh 2400 1200 8

50 x 25 x 2.5 Gal Mesh 2400 1200 6

50 x 50 x 4.0 Gal Mesh 2400 1200 10

75 x 50 x 4.0 Gal Mesh 2400 1200 8

100 x 100 x 4 Gal Mesh 2400 1200 5

100 x 100 x 4 Gal Mesh 2400 1200 5

Nerang 07 5596 3344 | Jimboomba 07 5546 9122 27

C SECTION PURLINS

Item Name Kg/m Depth Section

FlangeWeb Thick Diagram

Width Thick

A B C D E

Z10015 2.58 102 49 53 13.5 1.5

Z10019 3.25 102 48 53 15 1.9

Z15012 2.84 152 61 65 16 1.2

Z15015 3.54 152 61 65 16.5 1.5

Z15019 4.46 152 61 65 17.5 1.9

Z15024 5.62 152 60 66 19 2.4

Z20015 5.62 203 74 79 15 1.5

Z20019 5.68 203 74 79 15.5 1.9

Z20024 7.15 203 73 79 20.5 2.4

Z25019 6.43 254 74 79 18 1.9

Z25024 8.10 254 73 79 20 2.4

Item Name Kg/m Depth Section

FlangeThickness Diagram

Width Lip

A B C D

C10015 2.58 102 51 13.5 1.5

C10019 3.25 102 51 14.5 1.9

C15012 2.84 152 64 15 1.2

C15015 3.54 152 64 15.5 1.5

C15019 4.46 152 64 16.5 1.9

C15024 5.62 152 64 18 2.4

C20015 4.44 203 76 15.5 1.5

C20019 5.68 203 76 19 1.9

C20024 7.15 203 76 20.5 2.4

C25019 6.43 254 76 18.5 1.9

C25024 8.10 254 76 20 2.4

C30024 10.18 300 96 28 2.4

C30030 12.69 300 96 31.5 3.0

Z SECTION PURLINS

27A

Nerang 07 5596 3344 | Jimboomba 07 5546 9122 2827B

Nerang 07 5596 3344 | Jimboomba 07 5546 9122 29

Superior Steel Supplies & Ashmore Welding prides ourselves on providing a prompt and reliable delivery service. Nerang offers a full in-house crane truck fleet to ensure your orders are delivered on time every time when required, and more importantly due to having cranes on our trucks it ensure all jobs are delivered in a safe manner.(Delivery is based on un-loading and placed on the ground) & not installing products. Generally orders will be delivered the same day or the very next day, subject to the individual order and what time it is ordered. Make no mistake we will always do our best.

DELIVERY

28

Nerang 07 5596 3344 | Jimboomba 07 5546 9122 30

Trench Mesh

Item Name Length M Width M Kg EACH

R8TM200 6.0 0.200 7

R8TM300 6.0 0.300 9

R8TM400 6.0 0.400 11

R8TM500 6.0 0.500 15

R11TM200 6.0 0.200 13

R11TM300 6.0 0.300 18

R11TM400 6.0 0.400 22

R11TM500 6.0 0.500 26

R12TM200 6.0 0.200 16

R12TM300 6.0 0.300 22

R12TM400 6.0 0.400 27

R12TM500 6.0 0.500 33

Building Frame Components

Item Name BMT Length mm Pack

Stud 75 x 32 1.0 + 1.2 7500 50

Nogging 72 x 32 1.0 + 1.2 7500 50

Plate 78 x 31 1.0 + 1.2 7500 50

Roof Batten 40mm 0.75 6500 25

Ceiling Batten 22mm 0.42 6100 50

Top Hat

Item Name BMT Length mm

Top Span 64 x 34 x 20 x 6 0.75 /1.00/1.20 RTL

(A x B x C x D)

Top Span 96 x 34 x20 x 6 0.75 /1.00/1.20 RTL

(A x B x C x D)

Top Span 120 x 40 x 25 x 10 0.75 /1.00/1.20 RTL

(A x B x C x D)

Ceiling Batten 22mm 0.42 6100

Ab

c d

Bondek Structural Decking

Item Name THICKNESS Width mm Kg/M

Bondek .60 Domestic 0.60 600 4.88

Bondek .75 Domestic 0.75 600 6.05

Bondek 1.0 Domestic 1.00 600 7.99

29

Nerang 07 5596 3344 | Jimboomba 07 5546 9122 31

Aluminium Flats, Angles & Rounds

30

Nerang 07 5596 3344 | Jimboomba 07 5546 9122 32

Aluminium Hollows & Tubes

31

Nerang 07 5596 3344 | Jimboomba 07 5546 9122 3337

Telescope Chart

32

Nerang 07 5596 3344 | Jimboomba 07 5546 9122 3433

Nerang 07 5596 3344 | Jimboomba 07 5546 9122 3534

Nerang 07 5596 3344 | Jimboomba 07 5546 9122 3635

Nerang 07 5596 3344 | Jimboomba 07 5546 9122 373936

Nerang 07 5596 3344 | Jimboomba 07 5546 9122 3836A

Nerang 07 5596 3344 | Jimboomba 07 5546 9122 39

Special LengthsSuperior Steel have rolled special length orders within the rolling mills capabilities. A minimum order quantity (MOQ) may apply. See mill processing below for lengths shorter than 5.0m

Mill ProcessingSuperior Steel offers a pack cutting service if you require lengths less than the minimum manufactured length capability (5.0m) Please contact your sales representative for more information for pricing, terms and conditions.

Finishes• PAINTED - Blue, Black or Red• NOPC - (no oil, paint or coatings)

Product AvailabilityDual Graded product is available ex-rolling only and minimum order quantities apply.Contact your sales representative for more information

37

Nerang 07 5596 3344 | Jimboomba 07 5546 9122 4038