86756 Federal Register/Vol. 85, No. 250/Wednesday ... - Govinfo.gov
REGISTER - Govinfo.gov
-
Upload
khangminh22 -
Category
Documents
-
view
1 -
download
0
Transcript of REGISTER - Govinfo.gov
I TTTTTATTP A TIl H/ H/ Jtv JL JL/REGISTER
I
V O L U M E 31
Friday, May 13,1966
N U M B E R 93
Washington, D.C.
Pages 7023-7101
Agencies in this issue—The PresidentAgricultural Research Service Agricultural Stabilization and
Conservation Service Atomic Energy Commission Business and Defense Services
Administration Civil Aeronautics Board Commerce Department Consumer and Marketing Service Farm Credit Administration Federal Aviation Agency Federal Communications Commission Federal Maritime Commission Federal Power Commission Federal Trade Commission Fish and Wildlife Service Foreign Assets Control Office International Commerce Bureau Interstate Commerce Commission Labor Department Land Management Bureau National Park Service Office of Special Representative for
Trade NegotiationsSecurities and Exchange Commission Small Business Administration Treasury Department
Detailed list of Contents appears inside.
Subscriptions Now Beino Accepted
SLIP LAWS89th Congress, 2d Session
1966
Separate prints of Public Laws, published immediately after enactment, with marginal annotations and legislative history references.
Subscription Price:$12.00 per Session
Published by Office of the Federal Register, National Archives and Records Service, GeneralServices Administration
Order from Superintendent of Documents, U.S. Government Printing OfficeWashington, D.C., 20402
Area Code 202FEDEM LW REGISTER
Phone 963-3261
Published daily, Tuesday through Saturday (no publication on Sundays, Mondays or on the day after an official Federal holiday), by the Office of the Federal Register, National Archives and Records Service, General Services Administration (mail address National v i« I;!6? Building. Washington, D.O. 20408), pursuant to the authority contained in the
8B), under regulations prescribed by the Admin - V>" **“ ” ‘ H j| Distribution is made only by the Superintendent
Federal Register Act, approved July 26, 1935 .....................................1X1 „ u u U iistrative Committee of the Federal Register, approved by the President (1 CFR Ch. I ) , of Documents, Government Printing Office, Washington, D.C. 20402.
F^ A REGIS,TER * 2 f1urnis,hed byt m^U to subscribers, free of postage, for $1.50 per month or $15.00 per year, payable in i h g for individual copies varies in proportion to the size of the issue (15 cents for the first 80 pages and 5 cents for
3 £ £ 2 « g f i S S 0 « “ .PX ^ S “ S FOb0S i . Cae0,! ° r m0My 0rd“ ’ m“de ^ « “ Superintendent of i £ S S & .QiiariTh^ rf£il1iat0rL m it^ ! a lJ'Pi )ea^lli? herein is keyed to the Code of Federal Regulations, which is published, under 50 titles, pursuant to section 11 of the Federal Register Act, as amended. The Code of Federal Regulations is sold by the Superintendent of Documents. Prices of books and pocket supplements are listed in the first Federal Register issue of each month. P
There are no restrictions on the republication of material appearing in the Federal Register or the Code of Federal Regulations.
ContentsTHE PRESIDENT
PROCLAMATIONEighty-Second Birthday of Harry
S Truman _____________ — « 7027
EXECUTIVE AGENCIESAGRICULTURAL RESEARCH
SERVICERules and RegulationsHog cholera and other communi
cable swine diseases------------- 7029
AGRICULTURAL STABILIZATION AND CONSERVATION SERVICE
Rules and RegulationsReconstitution of farms, allot
ments, and bases; miscellaneous amendments___________________ 7030
AGRICULTURE DEPARTMENTSee Agricultural Research Serv
ice; Agricultural Stabilization and Conservation Service; Consumer and Marketing Service.
ATOMIC ENERGY COMMISSIONNoticesAgreement between AEC and
State of New Hampshire; discontinuance o f certain AEC regulatory authority and responsibility within the State________ 7090
Atcor, Inc.; proposed issuance of byproduct, source, and specialnuclear material license_______ 7091
Canrad Precision Industries, Inc.; filing of petition___a__________ 7091
BUSINESS AND DEFENSE SERVICES ADMINISTRATION
Rules and RegulationsCopper and copper-base alloys;
set-aside percentages__________ 7036
CIVIL AERONAUTICS BOARDNoticesFlying Tiger Line, Inc.; proposed
blocked-space tariff revisions 7092
COMMERCE DEPARTMENTSee also Business and Defense
Services Administration; International Commerce Bureau.
NoticesAssistant Secretary of Commerce
for Administration; delegation of authority relating to certifications________________________ 7Q89
CONSUMER AND MARKETING SERVICE
Rules and RegulationsOranges, Valencia, grown In Ari
zona and California; expenses and rate of assessment________ 7030
Proposed Rule MakingMilk and certain marketing areas:
Milwaukee; hearing--------------- 7061Puget Sound; decision_________ 7062Rock River Valley; hearing----- 7061
NoticesFarmers Auction Co. et al.; de
posting of stockyards____ ____ 7089
FARM CREDIT ADMINISTRATIONRules and RegulationsBanks for cooperatives; lending
limits of district banks and farm supplies eligible as security for commodity loans______________ 7029
FEDERAL AVIATION AGENCYRules and RegulationsAirworthiness directive; Boeing
Models 707 and 720 Series airplanes_________________________ 7031
Federal airways; alteration; correction________ 7031
Restricted area; time for use;alteration____________________ _ 7032
Temporary restricted area; designation __________________ 7032
Transition area; alteration______ 7031Transition area and control zone;
designation and alteration_____ 7031Proposed Rule MakingCargo and baggage compartment
smoke detection equipment;technical standard order_______ 7084
Jet routes; realignment___ ______ 7085
FEDERAL COMMUNICATIONS COMMISSION
Proposed Rule MakingAeronautical Advisory Service ;
correction.________ ____________ 7086Subscription Television Service;
extension of time for submission of technical data____________ 7086
NoticesHearings, etc.:
Hennepin Broadcasting Associates, Inc., and WMIN, Inc__ 7093
McAlister Broadcasting Corp.and KJJJ-TV____ __________ 7093
Northwestern Indiana Broadcasting Corp. et al__________ 7093
Sports Network, Inc., and American Telephone and TelegraphCo______________ :___________ 7093
WDIX, Inc., and Radio Orangeburg, Inc____________________ 7093
FEDERAL MARITIME COMMISSION
NoticesHanseatische Reederei Emil Offen
& Co. and Vaasa Line OY ; agreement filed for approval—-------- 7094
FEDERAL POWER COMMISSIONNotices Hearings, etc.:
Placid Oil Co. et al.; correction- 7095 Sunset International Petroleum
Corp_____________ 7094
FEDERAL TRADE COMMISSIONRules and Regulations Prohibited trade practices:
Broadway-Hale Stores, Inc____ 7056Feldman, Herman______________ 7056Libbey-Owens-Ford Glass Co.
and General Motors Corp----- 7057Mangel Stores Corp. et al______ 7058Merck & Co. et al_____________ 7059Ovation Cosmetics, Inc., and J.
Harry Ebbert-_______________ 7059Pappas, Gus, and Gus Pappas
Furs_________________________ 7057
FISH AND WILDLIFE SERVICEProposed Rule Making Hunting at Montezuma National
Wildlife Refuge_______ 7061
FOREIGN ASSETS CONTROL OFFICE
NoticesSilk piece goods, tussah; importa
tion from Korea; available certification _______ ___________ ____ 7087
INTERIOR DEPARTMENTSee Fish and Wildlife Service;
Land Management Bureau; National Park Service.
INTERNATIONAL COMMERCE BUREAU
Rules and RegulationsExport control; miscellaneous
amendments__________________ 7036
INTERSTATE COMMERCE COMMISSION
NoticesFourth section applications for
relief_________________________ 7098Motor carrier transfer proceed
ings____________________________ 7099
LABOR DEPARTMENTNoticesWage Appeals Board; delegation
of prevailing wage determination duties under Tennessee Valley Authority Act; revocation of amendment___ _____ 7099
(Continued on next page)
7025
7026 CONTENTS
LAND MANAGEMENT BUREAUNoticesNevada; filing of protraction dia
grams____________________ _____ 7087
NATIONAL PARK SERVICENoticesFire Island National Seashore,
William Floyd Estate, New York; filing of map___________ 7089
OFFICE OF SPECIAL REPRESENTATIVE FOR TRADE NEGOTIATIONS
Rules and RegulationsTrade agreements and adjust
ment assistance; miscellaneous amendments___________________ 7032
SECURITIES AND EXCHANGE COMMISSION
Notices Hearings, etc.:
Michigan Wisconsin Pipe LineCo___________________________ 7095
United States Steel Corp. (5 documents)______________ 7096, 7097
SMALL BUSINESS ADMINISTRATION
NoticesDelegations of authority to con
duct program activities:Minneapolis________ - _________ 7098New York_____________________ 7097Puerto Rico___________________ 7097Syracuse----------------------------- 7097
Disaster area declarations:Arkansas______________________ 7098Louisiana______________________ 7098Texas------------------- 7098
TREASURY DEPARTMENTSee also Foreign Assets Control
Office.NoticesWork shoes from Czechoslovakia;
determination of sales at less than fair value________________ 7087
List of CFR Parts Affected(Codification Guide)
The following numerical guide is a list of the parts of each title of the Code of Federal Regulations affected by documents published in today's issue. A cumulative list of parts affected, covering the current month to date appears at the end of each issue beginning with the second issue of the month.
A cumulative guide is published separately at the end of each month. The guide lists the parts and sections affected by documents published since January 1, 1966, and specifies how they are affected.
3 CFRProclamation:3724___ ________________ _______ 7027
6 CFR70_______ ___ .............. .________ 7029
7 CFR719 _________ _ .________ 7030908_______________________ . ------ 7030P roposed Rules:1038______________________ ________ 70611039 ____________________ ____ 70611125_____________________ ________ 7062
9 CFR76-------------------------------------- 7029
14 CFR39_____ 703171 (3 docum ents)_____ _____________ _ 703173 <2 docum ents)___________________ 7032Proposed Rules:37__________ 708475_______ 7085
15 CFR369___________ 7037372 __ 7038373 _ 7038382_______ 7038399___________________________________ 7038
16 CFR -13 (7 docum ents)_______________ 7056-7059
3 2 A CFRBDSA (Ch. V I) :M—11A_ ___ _ _ ______ . 7036
4 7 CFRProposed Rules:2_______ _______________ . _ . 708673__________ _______________ - 708687 _________________ _________ 7086
48 CFR16_ _____________ _______________ 703217 _________ _____ _____ 703318_______ ______________ ________ 703419________________________ ___ 7034
5 0 CFRProposed Rules:32_____________________ _____ _____ 7061
Presidential Documents
Title 3— THE PRESIDENTProclamation 3724
EIGHTY-SECOND BIRTHDAY OF HARRY S TRUMAN By the President of the United States of America
A ProclamationH arry S Truman, the thirty-third President o f the United States,
was born eighty-two years ago on the 8th day o f May, 1884.Throughout his life, Harry S Truman has devoted himself un
ceasingly to the cause o f freedom, peace, and the betterment o f his fellow man; H is historic decisions during his service as President of the United States from 1945 through 1952, have made the world a better and safer place not only for his fellow citizens but for the entire human race.
Harry S Truman’s deep concern for the well-being o f each individual American w ill never be surpassed by any President. H is wise and passionate pursuit o f justice, opportunity, and security for every citizen set an example which every President o f the United States w ill strive to emulate so long as the Nation and the Presidency shall endure. And it has won him a permanent place in the hearts o f his countrymen.
Among the legacy Harry S Truman gave to history are include^ the United Nations Charter which, under his guidance, the United States became the first major power to ra t ify ; the formulation and successful operation o f the Truman Doctrine, which played a major role in preserving free institutions in Greece and Turkey; the Marshall Plan, which played a major role in rebuilding the war-depleted economies o f Western Europe; and such outstanding legislative accomplishments for the welfare o f the American people, as the National School Lunch Aot, the National Mental Health Act, the Atomic Energy A ct o f 1946, the National Heart Act, the Minimum W age and Hour A<5t amendments o f October 26, 1949, the A ct o f September 23, 1950, providing Federal assistance fo r school construction in federally impacted areas, and the Federal Coal Mine Safety A ct amendments o f July 16, 1952.
H is accomplishments have been recognized by friendly nations throughout the world. H is contributions to peace have been especially honored by the creation o f the Harry S Truman Center for the A d vancement o f Peace, to be located at the H oly City o f Jerusalem.
The Senate o f the United States, in which he served faithfully and well before ascending to the Presidency, has further recognized this Nation’s indebtedness to Harry S Truman by calling upon the President o f the United States to extend upon the occasion o f his eighty- second birthday, May 8,1966, the admiration and gratitude o f all our people.
I am proud to honor this request and do hereby extend to the Honorable Harry S Truman this expression o f our profound and lasting gratitude and appreciation for his long years o f devoted service to his country.
FEDERAL REGISTER, VOL. 31, NO. 93— FRIDAY, MAY 13, 1966
7028 THE PRESIDENT
IN W IT N E S S W H E R E O F , I have hereunto set my hand and caused the Seal o f the United States o f America to be affixed,
D O N E at the -City o f Washington this ninth day o f May in the year o f our Lord nineteen hundred and sixty-six, and o f the
[ s e a l ] Independence o f the United States o f America the one hundred and ninetieth.
L yndon B. JohnsonBy the President:
D ean R usk ,Secretary o f State.
[F.R. Doc. 136-5304; Filed, May 12, 1906; 10:19 a.m.]
FEDERAL REGISTER, VOL. 31, NO. 93— FRIDAY, MAY 13, 1966
7029
Rules and Regulations
Title 6— AGRICULTURAL CREDIT
Chapter I— Farm Credit Administration
SUBCHAPTER F— BANKS FOR COOPERATIVESPART 70— BANKS FOR COOPERA
TIVES GENERALLYSubpart— Loan Policies
Subpart— Commodity LoansLending L imits of D istrict Banks and
Farm Supplies Eligible as Securityfor Commodity Loans
Effective June 1. 1966, § 70.22 of Title 6 of the Code of Federal Regulations is amended to read as follows to reflect increases in the lending limits of the district banks for cooperatives:§ 70.22 Lending limits of district banks.
Except with the written approval of the Director of Cooperative Bank Service, the lending limits of each district bank for cooperatives are hereby fixed so that loans to any one borrower outstanding at any time (exclusive of participations therein sold to others) may not exceed the following percentages of the net worth of the bank as of the close of the preceding fiscal year:
(a) Facility loans, 25 percent;(b) Operating capital loans, 25 per
cent;(c) Commodity loans (excluding loans
secured by Commodity Credit Corporation documents), 45 percent;
(d) The sum of facility and operating capital loans, 25 percent;
(e) The sum of facility, operating capital, and commodity loans (excluding loans secured by Commodity Credit Corporation documents), 45 percent;Provided, however, That a loan made within established limits, but which becomes excessive by virtue of a subsequent decrease in the net worth of the bank, may be retained and liquidated in an orderly manner.§ 70.53 [Amended]
Section 70.53 of Title 6 of the Code of Federal Regulations is amended by adding “Tinplate” immediately under “Petroleum products” at the end thereof in order to include “Tinplate” among farm supplies approved by the Director of Cooperative Bank Service as security for commodity loans when marketable and in acceptable storage.(Sec. 6, 47 Stat. 14, as amended, secs. 34, 38, 41, 48 Stat. 262, 264, as amended; 12 TJ.S.C. 665, 1134c, 1134J)
R. B. Tootell, Governor,
Farm, Credit Administration. [FJR. Doc. 66-5221; Filed, May 12, 1966;
8:47 a.m.]
Title 9— ANIMALS AND ANIMAL PRODUCTS
Chapter I— Agricultural R e s e a r c h Service, Department of Agriculture
SUBCHAPTER C— INTERSTATE TRANSPORTATION OF ANIMALS AND POULTRY
PART 76— HOG CHOLERA AND OTHER COMMUNICABLE SWINE DISEASES
Miscellaneous AmendmentsOn March 4, 1966, there was pub
lished in the Federal Register (31 F.R. 3401) a notice of proposed amendments to Part 76, Subchapter C, Chapter 1, Title 9, Code of Federal Regulations. After due consideration of all relevant material submitted in connection with such notice and pursuant to the provisions of the Act of May 29, 1884, as amended, the Act of February 2, 1903, as amended, the Act of March 3, 1905, as amended, the Act of September 6, 1961, and the Act of July 2, 1962 (21 U.S.C. 111-113, 114g, 115, 117, 120, 121, 123- 126; 134-134h), said Part 76 is hereby amended in the following respects:
1. Section 76.1(f) is amended to read:§ 76.1 Definitions.
* * * * *(f ) Virulent hog cholera virus. The
living agent capable of causing hog cholera found:
(1) In the clear serum, plasma, de- fibrinated blood, whole blood, or other tissue derived from pigs sick of hog cholera; or
(2) In any material used as a vehicle for perpetuating such living agent; or
(3) In living hog cholera virus vaccine commonly known as hog cholera vaccine, live virus modified, porcine origin.
2. The introductory language of § 76.4 is amended to read:§ 76.4 Interstate movement o f virulent
hog cholera virus prohibited, except as provided.
Virulent hog cholera virus shall not be moved interstate except that:
* * * * *3. Section 76.5 is amended to read:
§ 76.5 Interstate movement o f swine treated with virulent hog cholera virus prohibited, except as provided.
Swine treated with virulent hog cholera virus shall not be moved interstate except that:
(a) Swine treated with virulent hog cholera virus prior to April 1, 1966, and not known to be affected with hog cholera may be moved interstate if:
(1) Such swine are consigned for immediate slaughter; or
(2) Such swine have not been so treated within 21 days immediately prior to movement interstate, except that in the case of sows, treatment shall not have been within 150 days immediately prior to such movement; are accompanied by a permit from the appropriate official of the State of destination; are accompanied by a certificate issued by the Division; are moved directly to a farm of destination without contact with other swine during movement; and are moved interstate under such other conditions as may be imposed by the Director of the Division in order to prevent such swine from endangering other swine or impairing the hog cholera eradication program.
(b) Swine treated with virulent hog cholera virus for research and biologies production, and not known to be affected with hog cholera, may be moved interstate if such swine are moved directly to a point of destination designated by the Veterinary Biologies Division without contact with other swine during movement; are accompanied by a permit from the appropriate official of the State of destination; are moved under such other conditions as may be imposed by the Director of the Veterinary Biologies Division in order to prevent such swine from endangering other swine or impairing the hog cholera eradication program; and are accompanied by a certificate issued by the Veterinary Biologies Division specifying any such conditions imposed regarding the specific movement.(Sec. 4, 23 Stat. 32, as amended, sec. 1, 32 Stat. 791, as amended, sec. 2, 32 Stat. 792, as amended, sCc. 1, 75 Stat. 481, 76 Stat. 131; 21 U.S.C. 111, 112, 114g, 120, 125, 134c; 29 F.R. 16210, as amended, 30 F.R. 5799, as amended)
The foregoing amendments (1) include “hog cholera vaccine, live virus modified, porcine origin,” within the definition of virulent hog cholera virus in 9 CFR 76.1(f) and thereby have the effect of prohibiting the interstate movement of such vaccine except as provided in 9 CFR 76.4; and (2) amend § 76.5 to provide that swine treated with virulent hog cholera virus cannot be moved interstate, except as provided in paragraphs(a) and (b) of said section.
The hog cholera eradication program has progressed to the point where the continued use of “hog cholera vaccine, live virus modified, porcine origin,” may be a deterrent to the eradication of hog cholera. Experimental and field evidence indicates that the use of such vaccine virus can cause hog cholera in treated swine and can also cause hog cholera in swine that come in contact with such treated animals. Therefore, the use of said vaccine does not appear to provide the margin of safety desired in
FEDERAL REGISTER, V O L 31, NO. 93— FRIDAY, MAY 13, 1966
7030 RULES AND REGULATIONSvaccines used while the nationwide hog cholera eradication program is in effect.
The amendments impose certain restrictions under the regulations on the interstate movement of swine and “hog cholera vaccine, live virus modified, porcine - origin.” Such restrictions are deemed necessary to prevent the dissemination of hog cholera and to facilitate the hog cholera eradication program. These amendments should be made effective promptly in order to fully accomplish their purpose in the public interest. Accordingly, under section 4 of the Administrative Procedure Act (5 U.S.C. 1003), good cause is found for making the amendments effective less than 30 days after publication in the Federal Register.
Effective date. These amendments shall become effective upon publication in the Federal Register. :
Done at Washington^ D.C., this 10th day of May 1966.
R. J. Anderson, Deputy Administrator,
Agricultural Research Service.[F.R. Doc. 66-5251; FUed, May 12, 1966;
8:49 ajtn.]
Title 7— AGRICULTUREChapter VII— Agricultural Stabiliza
tion and Conservation Service (Agricultural Adjustment), Department of Agriculture
SUBCHAPTER B— FARM MARKETING QUOTAS AND ACREAGE ALLOTMENTS
[Arndt. 9]
PART 719— RECONSTITUTION OFFARMS, ALLOTMENTS, AND BASES
Miscellaneous AmendmentsBasis and purpose. This amendment
is issued pursuant to section 375(b) of the Agricultural Adjustment Act of 1938, as amended (7 U.S.C. 1375(b)), section 124 of the Soil Bank Act (7 U.S.C. 1812), and the Soil Conservation and Domestic Allotment Act (16 U.S.C. 590g-q). This amendment further implements section 379 of the Agricultural Adjustment Act of 1938, as enacted on November 3,1965, by the Food and Agriculture Act of 1965 (79 Stat. 1211).
The amendment to the Regulations for Reconstitution of Farms, Allotments, and Bases includes the following:
(a) Amends § 719.7(b) to add a new sentence to permit the county committee to make a reconstitution effective for burley tobacco for 1966 in cases where the allotment is allocated as designated by the land owner even though such crop has been planted.
(b) Amends § 719.8 to add a new paragraph (k) to provide that a burley tobacco allotment may be divided in the manner designated by the land owner in cases where the ownership of a tract of land is transferred from the parent farm for nonagricultural uses.
Since farms are now being reconstituted and producers on such farms are making plans for producing 1966 crops, it is essential that this amendment be made effective as soon as possible. It is hereby found and determined that compliance with the notice, public procedure, and the 30-day effective date requirement of section 4 of the Administrative Procedure Act (5 U.S.C. 1003) is impracticable and contrary to the public interest and this amendment shall be effective upon filing this document with the Director, Office of the Federal Register.
The Regulations for Reconstitution of Farms, Allotments, and Bases (29 F.R. 13370, as amended), are amended as follows:
1. Subparagraph (1) of paragraph (b) of § 719.7 of the regulations, as amended, is amended to read as follows:§ 719.7 Reconstitution o f farm allot
ments, history acreages, and farm bases.$ * '* * *
(b) Effective d a t e of reconstitutions. * * *
(1) Allotment crops. The reconstitution shall be effective for an allotment crop for the current program year if such reconstitution is completed before such crop is planted and for farms having both fall seeded and spring seeded allotment crops (including feed grain base crops) may be made effective for the current program year even though the fall seeded crop has been planted, if the county committee determines that no adverse effect to the program for the allotment crop involved will result from such reconstitution and the farm operator agrees by signing a request for the reconstitution. Notwithstanding t h e foregoing provisions of this subparagraph, any reconstitution under § 719.8 (k) for an allotment crop for the 1966 program year may be made effective for such crop for such program year even though such crop has been planted if (i) the county committee determines that the reconstitution was warranted at the time the crop was planted and (ii) the farm operator agrees to making the reconstitution effective for the 1966 program year.
* * * * *
2. Section 719.8 of the regulations is amended to add a new paragraph (k) at the end thereof to read as follows:§ 719.8 R u le s for determining farm
bases, farm allotments, and history acreages where reconstitution is by division.* * * * *
(k) Allocation of burley tobacco allotments as designated by land owner. Burley tobacco allotments may be designated in the same manner as other crop allotments in paragraph ( j ) of this section where the ownership of a tract of land is transferred for nonagricultural uses. This method may be used in any case where transfer of ownership of tracts of land for nonagricultural uses is acted upon by the county committee after January 31,1966.
(Secs. 375, 379, 52 Stat. 66, as amended, 79 Stat. 1211, 7 U.S.C. 1375, 1379; sec. 124, 70 Stat. 198, 7 U.S.C. 1812; secs. 16(b), 74 Stat. 1030, 16(c), 75 Stat. 5, 16(d), 75 Stat. 302, 105(c), 75 Stat. 301, 16(h), 77 Stat. 45, 16 UJS.C. 590 p)
Effective date: Date of filing this document with the Director, Office of the Federal Register.
Signed at Washington, D.C., on May 10.1966.
H. D. G odfrey,Administrator, Agricultural Sta
bilisation and Conservation Service.
[F.R. Doc. 66-5252; Filed, May 12, 1966; 8:50 am .]
Chapter IX— Consumer and Marketing Service (Marketing Agreements and O rd ers; Fruits, Vegetables, Nuts), Department of Agriculture
PART 908— V A LEN CIA ORANGES GROWN IN ARIZONA AND DESIGNATED PART OF CALIFORNIA
Expenses and Rate of AssessmentOn April 27, 1966, notice of rule mak
ing was published in the Federal Register (31 F.R. 6375) regarding proposed expenses and the related rate of assessment for the period beginning November 1, 1965, and ending October 31, 1966, pursuant to the marketing agreement, as amended, and Order No. 908, as amended (7 CFR Part 908), regulating the handling of Valencia oranges grown in Arizona and designated part of California. This regulatory program is effective under the Agricultural Marketing Agreement Act of 1937, as amended (7 U.S.C. 601-674). After consideration of all relevant matters presented, including the proposals set forth in such notice which were submitted by the Valencia Orange Administrative Committee (established pursuant to said marketing agreement and order), it is hereby found and determined that:
§ 908.205 Expenses and rate of assessment.
(a) Expenses. Expenses that are reasonable and likely to be incurred by the Valencia Orange Administrative Committee during the period November 1, 1965, through October 31, 1966, will amount to $203.287.
(b) Rate of assessment. The rate of assessment for said period, payable by each handler in accordance with § 908.41, is fixed at $0.013 per carton of Valencia oranges.
It is hereby further found that good cause exists for not postponing the effective date hereof until 30 days after publication in the F ederal R egister (5 U.S.C. 1001-1011) in that (1 ) the relevant provisions of said marketing agreement and this part require that the rate of assessment herein fixed shall be applicable to all assessable oranges handled during the aforesaid period, and (2) such period began on November 1, 1965,
FEDERAL REGISTER, VOL. 31, NO. 93— FRIDAY, MAY 13, 1966
RULES AND REGULATIONS 7031
and said rate of assessment will automatically apply to all such oranges beginning with such date.(Secs. 1-19, 48 Stat. 31, as amended; 7 U.S.C. 601-674)
Dated: May 9, 1966.F lo y d F . H e d lu n d ,
Director, Fruit and Vegetable Division, Consumer and Marketing Service.
[P.R. Doc. 66-5253; PUed, May 12, 1966; 8:50 a.m.]
Title 14— AERONAUTICS AND SPACE
Chapter I— Federal Aviation Agency [Docket No. 7359; Arndt. 39-236]
PART 39— AIRWORTHINESS DIRECTIVES
Boeing Model 707 and 720 Series Airplanes
The Agency has determined that an airworthiness directive is necessary with respect to the Boeing Model 707 and 720 Series airplanes to insure that the emergency exit lights will be illuminated when power is lost on the essential AC bus. In addition to an appropriate operating limitation which must be set forth on a placard or incorporated into the Airplane Flight Manual as an interim measure, the directive requires the installation of a new relay in the emergency exit light circuit or a rewiring on the circuit to existing contacts on the essential AC bus.
Since a situation exists that requires immediate adoption of this regulation, it is found that notice and public procedure hereon are impracticable and good cause exists for making this amendment effective in less than 30 days.
In consideration of the foregoing, and pursuant to the authority delegated to me by the Administrator (25 F.R. 6489), § 39.13 of Part 39 of the Federal Aviation Regulations is amended by adding the following new airworthiness directive:Boeing. Applies to Model 707 and 720 Series
airplanes listed in Boeing Service Bulletin 1789, Revision 1.
Compliance required as indicated, unless already accomplished.
(a ) Within the next 125 hours’ time in service after the effective date of this AD, incorporate the following operating limitation in either the Airplane Plight Manual or on a placard installed adjacent to the cabin dome light switch:THE DOME LIGHT SWITCH MUST BE IN
EITHER THE BLUE, LOW OR BRIGHTPOSITION DURING TAKEOFF ANDLANDING
(b ) Within the next 1,200 hours’ time in service after the effective date of this An, install a new relay in the emergency exit light circuit or rewire the circuit to use existing contacts on the essential AC power failure relay, so that the emergency exit lights will function automatically when power is lost on the essential AC bus in accordance with Boeing Service Bulletin 1789, Revision 1, or later FAA-approved revision or an equivalent approved by the Chief, Aircraft Engineering Division, FAA Western Region.
(c ) The operating limitation imposed under paragraph (a ) may be removed when the modification required in paragraph (b ) has been accomplished.
This amendment becomes effective May 13, 1966.(Secs. 313(a), 601, 603, Federal Aviation Act of 1958 (49 U.S.C. 1354(a), 1421, 1423))
Issued in Washington, D.C., on May 10, 1966.
Jam es F . R u d o l p h , Acting Director,
Flight Standards Service.[F.R. Doc. 66-5242; Filed, May 12, 1966;
8:49 a.m.]
[Airspace Docket No. 65-EA-82]
PART 71— d es ig n a t io n o f fe d er a l AIRWAYS, CONTROLLED AIRSPACE, AND REPORTING POINTSAlteration of Federal Airways;
CorrectionOn March 29, 1966, F.R. Doc. No. 66-
3263 was published in the F ederal R egister (31 F.R. 5057) and amended Part 71 of the Federal Aviation Regulations by altering VOR Federal airways Nos. 72, 106, and 431. These actions are to become effective 0001 e.s.t., May 26, 1966.
Subsequent to the publication of the document, a flight check performed by the Federal Aviation Agency indicates the segment of V-431 between the Revere, Mass., intersection and Gardner, Mass., VOR should be aligned via the Gardner VOR 097° True radial in lieu of the 098° True radial. Accordingly, action is taken herein to correct this alignment.
Since this change is minor in nature and imposes no additional burden on any person, notice and public procedure hereon are unnecessary and the effective date of the final rule as initially adopted may be retained.
In consideration of the foregoing, effective immediately, F.R. Doc. No. 66- 3263, item c. is altered to read:
c. In V-431 “From Keene, N.H.,” is deleted and “From Boston, Mass., via IN T Boston 015° and Gardner, Mass., 097° radials; to Gardner. From Keene, N.H.,” is substituted therefor.(Sec. 307(a), Federal Aviation Act of 1958 (49 U.S.C. 1348))
Issued in Washington, D.C., on May 6, 1966.
H . B. H elstrom , Acting Chief, Airspace and
Air Traffic Rules Division.[F.R. Doc. 66-5207; Filed, May 12, 1966;
8:45 a.m.]
[Airspace Docket No. 66-SO-27]
PART 71— DESIGNATION OF FEDERAL AIRWAYS, CONTROLLED AIRSPACE, AND REPORTING POINTS
Alteration of Transition AreaThe purpose of this amendment to Part
71 of the Federal Aviation Regulations is to alter the Fort Rucker, Ala., transition area.
The Fort Rucker transition area (31 FJR. 2149) is described, in part, as “ * * * extending from 22 miles N to 10 miles S of the IN T of the Crestview VOR 013° and the Evergreen, Ala., VOR 114° radials * *
Because of the scheduled relocation of the Evergreen VOR and the coincident name change from Evergreen to Monroeville on May 26,1966, it is necessary that the transition area description be amended accordingly.
Since this amendment is editorial in nature and imposes no additional burden on any person, notice and public procedure hereon are unnecessary and the amendment may become effective without regard to the 30-day statutory period.
In consideration of the foregoing, Part 71 of the Federal Aviation Regulations is amended, effective 0001 e.s.t., May 26, 1966, as hereinafter set forth.
In §71.181 (31 F.R. 2149) the Fort Rucker, Ala., transition area is amended as follows:
The portion designated “within 12 miles W and 8 miles E of the Crestview, Fla., VOR 013° radial extending from 22 miles N to 10 miles S of the IN T of the Crestview VOR 013° and the Evergreen, Ala., VOR 114° radials” is deleted and “within 12 miles W and 8 miles E of the Crestview, Fla., VORTAC 013° radial extending from 21 miles N to 11 miles S of the IN T of the Crestview VORTAC 013° and the Monroeville, Ala., VOR 110° radials” is substituted therefor.(Sec. 307(a), Federal Aviation Act of 1958; 49 U.S.C. 1348(a))
Issued in East Point, Ga., on May 5, 1966.
W il l ia m M. F l e n e r , Acting Director, Southern Region.
[F.R. Doc. 66-5208; Filed, May 12, 1966;8:45 a.m.]
[Airspace Docket No. 65-WE-86]
PART 71— DESIGNATION OF FEDERAL AIRWAYS, CONTROLLED AIRSPACE, AND REPORTING POINTS
Designation of Transition Area and Alteration of Control Area
On March 12, 1966, a notice of proposed rule making was published in the F ederal R egister (31 F.R. 4351) stating that the Federal Aviation Agency was considering an amendment to Part 71 of the Federal Aviation Regulations that would designate a transition area and alter Control 1173 in the vicinity of San Francisco, Calif.
Interested persons were afforded an opportunity to participate in the proposed rule making through the submission of comments. All comments received were favorable.
In consideration of the foregoing, Part 71 of the Federal Aviation Regulations is amended effective, 0001 e.s.t., July 21, 1966, as hereinafter set forth.
1. In § 71.163 (31 F.R. 2050) Control 1173 is amended to read:
Control 1173That airspace W of San Francisco, Calif.,
bounded by a line extending from latitude 37°40'00" N., longitude 125°23'30" W., to
FEDERAL REGISTER, V O L 31, NO. 93— FRIDAY, MAY 13, 1966No. 93---- 2
7032 RULES AND REGULATIONSlatitude 37°50'00" N., longitude 124°24'30" W„ to latitude 38°00'00'' N„ longitude 123°23'00" W .t to latitude 38°03'25" N., longitude 123° 11/45" W., thence via the W edge of V-199 and V-27 to latitude 37°09’20" N„ longitude 122°34'50" W., to latitude 36°16'00" N., longitude 124°26W ' W., to the point of beginning, excluding the portion below 2,500 feet MSL. The portion within W-513 is excluded between the hours of 0800 and 2000 P.s.t., Monday through Friday, and below 3,000 feet MSL within W-513 between the hours of 2000 and 0800 P.s.t., Monday through Friday.
2. In § 71.181 (31 P.R. 2149) the San Francisco, Calif., transition area is added as follows:
San Francisco, Calif.
That airspace extending upward from 700 feet above the surface bounded on the N by latitude 38°02'00” N., on the E by longitude 121°52'00'' W., on the S by latitude 37°30'00" N., and on the W by a line extending from latitude 37°30'00" N„ longitude 122°27'00" W., to latitude 37°34'00" N., longitude 122°31'00" W., to latitude 37°55'00" N., longitude 122°31'00" W., "to latitude38°02’00" N., longitude 122°40'00" W.; and that airspace extending upward from 1,200 feet above the surface bounded on the N by latitude 38°02'00" N., on the E by a. line extending from latitude 38°02'00" N., longitude 121°37'00" W., to latitude 37°38'00" N., longitude 121°37'00" W., to latitude 37°38'00" N., longitude 121°50'00" W., to latitude 37o30'00'' N., longitude 121°50'00" W., on the S by latitude 37°30'00" N., and on the W by V-27 and V-199.(Secs. 307(a), 1110, Federal Aviation Act of 1958 (49 U.S.C. 1348, 1510), E.O. 10854 (24 F.R. 9565))
Issued in Washington, D.C., on May 9, 1966.
H. B. Helstrom, Acting Chief, Airspace and
Air Traffic Rules Division.[F.R. Doc. 66-5244; Filed, May 12, 1966;
8:49 a.m.]
[Airspace Docket No. 65-WE-104]
PART 73— SPECIAL USE AIRSPACEDesignation of Temporary Time of
Use for Restricted Area AlteredThe purpose of this amendment is to
alter F.R. Doc. No. 66-1430 (31 F.R. 2583) which designates a temporary restricted area R-6411 at Hanksville, Utah.
The time of use for R-6411 as published in Airspace Docket No. 65-WE- 104 was from June 1, 1966, through June 30, 1966. However, subsequent to publication of the rule the Department of the Air Force has advised that a ten day extension to this period of activation would provide training for an additional military unit, resulting in a saving of approximately one million dollars in troop movement costs and shipments of heavy equipment.
Since the precise times when R-6411 would be needed each year, subsequent to the first-designated period, were indefinite and were not susceptible to determination at the time the rule designating the restricted area was published, it was determined to establish all subsequent firing periods by a rule published in the
Federal Register. Additionally, the Federal Aviation Agency considers that a ten day extension to the June firing period would be in the public interest for the reasons cited above.
Since this amendment is made in accordance with the procedures set forth in the notice and previous rule, additional notice and public procedure hereon are unnecessary and the original date of effectiveness may be retained.
In consideration of the foregoing, Federal Register Document No. 66-1430 is amended, effective immediately, as hereinafter set forth.
In the time of designation delete “June 30, 1966,” and" substitute “July 10, 1966,” therefor.(Sec. 307(a), Federal Aviation Act of 1958 (49 U.S.C. 1348))
Issued in Washington, D.C., on May 9, 1966.
W illiam E. M organ, Acting Director, Air Traffic Service.
[F.R. Doc. 66-5245; Filed, May 12, 1966;8:49 a.m.]
[Airspace Docket No. 66-WE-9]
PART 73— SPECIAL USE AIRSPACEDesignation of Temporary
Restricted AreaOn March 15, 1966, a notice of pro
posed rule making was published in the Federal Register (31 F.R. 4415), stating that the Federal Aviation Agency was considering an amendment to Part 73 of the Federal Aviation Regulations which would establish a temporary restricted area near Branding, Utah, for the period June 15, 1966, through August 1, 1966. Additionally, it was stated that all subsequent firing periods would be designated by a rule published in the Federal Register based on that notice.
On March 25, 1966, a supplemental notice of proposed rule making was published in the Federal Register (31 F.R. 4972) amending the proposal by changing the first period of activation to read from June 23, 1966, through August 15, 1966. This revision will permit the depiction of the Restricted Area on all possible charts.
Interested persons were afforded an opportunity to participate in the rule- making through submission of comments. All comments received were favorable.
In consideration of the foregoing, Part 73 of the Federal Aviation Regulations is amended, effective 0001 e.s.t., June 23, 1966, as hereinafter set forth.
In § 73.64 (31 F.R. 2336) the following is added:
R-6410 Blanding, Utah
Boundaries: Beginning at latitude 37°- 33'00" N., longitude 109°33'00" W.; to latitude 37°21'0(Kl' N., longitude 109°21'00" W.; to latitude 37°17'00'' N., longitude 109°29'- 00" W.; to latitude 37°31'00" N., longitude 109°36'00" W.; to point of beginning.
Designated altitudes: Surface to unlimited.
Time of designation: Continuous, June 23, 1966, through August 15, 1966. All subse
FEDERAL REGISTER, VOL. 31, NO. 93— FRIDAY, MAY 13
quent firing periods will be designated by a rule published in the Federal Register.
Controlling agency: Federal Aviation Agency, Denver ARTC Center.
Using agency: Commander, Air Force Missile Development Center, Holloman AFB, N. Mex.
(Sec. 307(a), Federal Aviation Act of 1958 (49 U.S.C. 1348))
Issued in Washington, D.C., on May 9, 1966.
W illiam E. M organ, Acting Director, Air Traffic Service.
[F.R. Doc. 66-5246; Filed, May 12, 1966; 8:49 a.m.]
Title 48— TRADE AGREEMENTS AND ADJUSTMENT ASSISTANCE PROGRAMS
Chapter I— Presidential Documents SUBCHAPTER B— PROCLAMATIONSADDITIONS TO CHAPTER
Proclamations 3696, 3697, 3703, and 3712 are added to Subchapter B of Chapter I of Title 48 of the Code of Federal Regulations as new Parts 16, 17, 18, and 19, respectively, reading as follows:
PART 16— TERM INATION OF INCREASED DUTY ON IMPORTS OF CLINICAL THERMOMETERS
BY THE PRESIDENT OF THE UNITED STATES OF AMERICA
Proclamation No. 3696
1. WHEREAS, pursuant to Section 350 of the Tariff Act of 1930, the President, on April 21, 1951, entered into, and by Proclamation No. 2929 of June 2,1951 (65 Stat. c l2 ), proclaimed the Torquay Protocol to. the General Agreement on Tariffs and Trade, including a concession applicable to certain types of clinical thermometers provided for in item 218(a) in Part I to Schedule X X of the Torquay Protocol (3 U.S.T. (pt. 1) 1144) ;
2. WHEREAS, pursuant to Section 7 of the Trade Agreements Extension Act of 1951, and in accordance with the provisions of Article X IX of the General Agreement on Tariffs and Trade (61 Stat. (pt. 5) A58; 8 U.S.T. (pt. 2) 1786), the President by Proclamation N6. 3235 of April 21, 1958 (72 Stat. (pt. 2) c35), proclaimed that, effective after the close of business on May 21, 1958, and until the President otherwise proclaimed, the concession with respect to the types of clinical thermometers identified in the first recital of this proclamation should be withdrawn, thereby increasing the rate of duty with respect to such articles;
3. WHEREAS, after compliance with the requirements of Section 102 of the Tariff Classification Act of 1962 (76 Stat. 73), the President by Proclamation No. 3548 of August 21, 1963 (77 Stat. 1017), proclaimed, effective on and after August 31,1963, the Tariff Schedules of the United States, which reflected, with modifications, and, in effect, superseded (1)
, 1966
RULES AND REGULATIONS 7033
the provisions of Proclamation No. 2929 insofar as that proclamation proclaimed the concession with respect to the types of clinical thermometers identified in the first recital of this proclamation (see item 711.35 of the Tariff Schedules of the United States), and (2) the provisions of Proclamation No. 3235 (see item 930.00 of the Appendix to the Tariff Schedules of the United States) ;
4. WHEREAS, following my request under Section 351(d)(2) of the Trade Expansion Act of 1962 (19 U.S.C. 1981 (d) (2) ), the United States Tariff Commission conducted an investigation, including a hearing, pursuant to Section- 351(d)(5) of that Act (19 U.S.C. 1981 (d) (5) ), and on May 27, 1965, submitted to me a report (30 F.R. 7306) advising me of its judgment as to the probable economic effect on the domestic industry concerned of the reduction or termination of the increased rate of duty effected by Proclamation No. 3235 (now reflected, with modifications, in item 930.00 of the Appendix to the Tariff Schedules of the United States) ;
5. WHEREAS, in relation to the possible reduction or termination of such increased rate of duty, I have received and taken into account the advice from the Tariff Commission, advice of the Secretary of Commerce and the Secretary of Labor in accordance with Section 351(c) (1) (A ) of the Trade Expansion Act of 1962 (19 U.S.C. 1981(c)(1) (A ) ) , recommendations of the Special Representative for Trade Negotiations in accordance with Sections 3(b), 3 ( j ), and 5(c) of Executive Order No. 11075 of January 15,1963 (48 C.F.R. 1.3(b), 1.3( j ) , and 1.5(c)), and advice of other interested agencies of the Government; and
6. WHEREAS, in accordance with Section 351(c) (1) (A ) of the Trade Expansion Act of 1962,1 have determined that the termination, as herein proclaimed, of the increased rate of duty effected by Proclamation No. 3235 (now reflected, with modifications, in item 930.00 of the Appendix to the Tariff Schedules of the United States) is in the national interest:
NOW, THEREFORE, I, LYNDON B. JOHNSON, President of the United States of America, acting under the authority vested in me by the Constitution and the statutes, including Section 351(c) (1) (A ) of the Trade Expansion Act of 1962, and in accordance with the provisions of Article X IX of the General Agreement on Tariffs and Trade, do proclaim that:
(1) Proclamation No. 3235 is terminated., (2) Item 930.00 (reflecting, with mod
ifications, Proclamation No. 3235 which effected the increased rate of duty) is deleted from the Appendix to the Tariff Schedules of the United States.
(3) The concession with respect to the types of clinical thermometers identified in the first recital of this proclamation shall be applied to such of those articles as are entered, or withdrawn from warehouse, for consumption on or after the date of this proclamation, in accordance with the provisions of item 711.35 of the Tariff Schedules of the United States.
IN WITNESS WHEREOF, I have hereunto set my hand and caused the Seal of the United States of America to be affixed.
DONE at the City of Washington this seventh day of January in the year of our
Lord nineteen hundred and [ seal] sixty-six, and of the Independ
ence of the United States of America the one hundred and ninetieth.
Lyndon B. Johnson
By the President:Dean Rusk,
Secretary of State.
PART 17— REDUCTION OF INCREASEDDUTIES ON IMPORTS OF STAINLESS-STEEL FLATWEAR
BY THE PRESIDENT OF THE UNITEDSTATES OF AMERICAProclamation No. 3697
1. WHEREAS, pursuant to Section 350 of the Tariff Act of 1930, the President, on April 21, 1951, entered into, and by Proclamation No. 2929 of June 2, 1951 (65 Stat. c l2 ), proclaimed the Torquay Protocol to the General Agreement on Tariffs and Trade, including supplementary concessions with respect to certain types of stainless-steel knives and forks provided for in item 355 in Part I of Schedule X X to the Torquay Protocol (3 U.S.T. (pt. 1) 1160); and, on May 23, 1956, entered into, and by Proclamation’ No. 3140 of June 13, 1956 (70 Stat. c33), proclaimed the Sixth Protocol of Supplementary Concessions to the General Agreement on Tariffs and Trade, including a supplementary concession with respect to certain types of stainless-steel spoons provided for in item 339 in Part I of Schedule X X to the Sixth Protocol of Supplementary Concessions (7 U.S.T. (pt. 2) 1362);
2. WHEREAS, pursuant to Section 7 of the Trade Agreements Extension Act of 1951, and in accordance with the provisions of Article X IX of the General Agreement on Tariffs and Trade (61 Stat. (pt. 5) A58; 8 U.S.T. (pt. 2) 1786), the President by Proclamation 3323 of October 20, 1959 (74 Stat. c l5 ), modified, effective on and after November 1, 1959, and until the President otherwise proclaimed, the supplementary concessions with respect to the types of stainless- steel knives, forks, and spoons identified in the first recital of this proclamation by proclaiming increased rates of duty limited to entries after the entry of an aggregate quantity of 69 million single units of such articles in any 12-month period beginning November 1, resulting in an annual tariff quota at the concession rates of duty;
3. WHEREAS, after compliance with the requirements of Section 102 of the Tariff Classification Act of 1962 (76 Stat. 73), the President by Proclamation No. 3548 of August 21, 1963 (77 Stat. 1017), proclaimed, effective on and after August 31, 1963, the Tariff Schedules of the United States, which reflected, with modifications, and, in effect, superseded (1) the provisions of Proclamations Nos. 2929 and 3140 insofar as those procla
mations proclaimed the supplementary concessions wtih respect to the types of stainless-steel knives, forks, and spoons identified in the first recital of this proclamation (see Subpart E of Part 3 of Schedule 6 of the Tariff Schedules of the United States, including items 650.09, 650.11, 650.39, 650.41, and 650.55), and(2) the provisions of Proclamation No. 3323 (see the Appendix to the Tariff Schedules of the United States, including items 927.50 through 927.54) ;
4. WHEREAS, following my request under Section 351(d)(2) of the Trade Expansion Act of 1962 (19 U.S.C. 1981(d )(2 ) ), the United States Tariff Commission conducted an investigation, including a hearing, pursuant to Section 351(d)(5) of that Act (19 U.S.C. 1981 (d) (5) ), and on April 14, 1965, submitted to me a report (30 F.R. 5655) advising me of its judgment as to the probable economic effect on the domestic industry concerned of the reduction or termination of the increased rates of duty described in the second recital of this proclamation and provided for in Proclamation No. 3323 (now reflected, with modifications, in the Appendix to the Tariff Schedules of the United States, including items 927.50 through 927.54) ;
5. WHEREAS, in relation to the possible reduction or termination of such increased rates of duty, I have received and taken into account the advice from the Tariff Commission, advice of the Secretary of Commerce and the Secretary of Labor in accordance with Section 351(c) (1) (A ) of the Trade Expansion Act of 1962 (19 U.S.C. 1981 (c)(1 )(A )), recommendations of the Special Representative for Trade Negotiations in accordance with Sections 3(b), 3( j ) , and 5(c) of Executive Order No. 11075 of January 15, 1963 (48 CFR 1.3(b), 1.3(j), and 1.5(c) ), and advice of other interested agencies of the Government; and
6. WHEREAS, in accordance with Section 351(c) (1) (A ) of the Trade Expansion Act of 1962,1 have determined that the reduction, as herein proclaimed, of the increased rates of duty described in the second recital of this proclamation and provided for in Proclamation No. 3323 (now. reflected, with modifications, in the Appendix to the Tariff Schedules of the United States, including items 927.50 through 927.54) is in thè national interest *
NOW,’ THEREFORE, I, LYNDON B. JOHNSON, President of the United States of America, acting under the authority vested in me by the Constitution and the statutes, including Section 351(c) (1) (A ) of the Trade Expansion Act of 1962, and in accordance with the provisions of Article XEX of the General Agreement on Tariffs and Trade, do proclaim that:
(1) Proclamation No. 3323 is terminated. •
(2) Subpart A of Part 2 of the Appendix to the Tariff Schedules of the United States is amended as follows:
(A ) The second article, description preceding item 927.50 is amended to read as follows:
“For an aggregate quantity from countries subject to the rates set forth in rate of duty column numbered 1 not to exceed
FEDERAL REGISTER, VOL. 31, NO. 93— FRIDAY, MAY 13, 1966
7034 RULES AND REGULATIONS(1) 84 million single units entered in the 12-month period beginning November 1, 1965, and (2) 84 million single units entered in the period beginning November 1, 1966, and ending at the close of October 11, 1967, unless the President proclaims otherwise pursuant to section 351
<c) (1) or (2) of the Trade Expansion Act of 1962 (19 U.S.C. 1981(c) (1) or (2 ) ) : ” .
(B ) Items 927.53 and 927.54 are deleted, and the following new items 927.60, 927.61, and 927.62 are substituted in lieu thereof:
“ 927. >0 Knives and forks:With handles not containing nickel and n o t : 3$ each+15% ad val___ _ 3)5 each+15% ad val. but
1 927.61
containing over 10 percent by weight of manganese (item 650.09 and 650.39).
With handles containing nickel or contain- 3(5 each+20% ad val____
not less than 2 each +45% ad val.
31 each+20% ad val. buting over 10 percent by weight of man- not less than 2)5 each
927.62gañese (items 650.11 and 650.41). +45% ad val.
No change.”
(3) The actions proclaimed in paragraphs (1) and (2) above are effective with respect to articles entered, or withdrawn from warehouse, for consumption on or after November 1, 1965,
IN WITNESS WHEREOF, I have hereunto set my hand and caused the Seal of the United States of America to be affixed.
DONE at the City of Washington this seventh day of January in the year of our
Lord nineteen hundred and [ seal] sixty-six, and of the Independ
ence of the United States o f America the one hundred and ninetieth.
3548 of August 21, 1963 (77 Stat. 1017), proclaimed, effective on and after August 31,1963, the Tariff Schedules of the United States, which reflected, with modifications, and, in effect, superseded (1) the provisions of Proclamation Nos. 2761A and 2782 insofar as those proclamations proclaimed the concession with respect to the types of safety pins identified in the first recital of this proclamation (see item 745.56 of the Tariff Schedules of the United States}, and (2) the provisions of Proclamation No. 3212 (see item 943.10 of the Appendix to the Tariff Schedules of the United States);
Lyndon B. Johnson
By the President:Dean Rusk,
Secretary of State.
PART 18— TERM INATION OF INCREASED DUTY ON IMPORTS OF SAFETY PINS
BY THE PRESIDENT OF THE UNITED STATES OF AMERICAProclamation N o. 3703
' 1. WHEREAS, pursuant to Section 350 of the Tariff Act of 1930, the President,* on October 30, 1947, entered into, and by Proclamation No. 2761A of December 16, 1947 (61 Stat. (pt. 2) 1103), and Proclamation No. 2782 of April 22, 1948 (62 Stat. (pt. 2) 1500), proclaimed, the General Agreement on Tariffs and Trade (61 Stat. (pt. 5) A l l ; hereinafter referred to as “ the General Agreement” ) , including a concession with respect to certain types of safety pins provided for in item 350 in Part I to Schedule X X of the General Agreement (61 Stat. (pt. 5) A1205) ;
2. WHEREAS, pursuant to Section 7 of the Trade Agreements Extension Act of 1951, and in accordance with the provisions of Article XJLX of the General Agreement (61 Stat. (pt. 5) A58; 8 U.S.T. (pt. 2) 1786), the President by Proclamation No. 3212 of November 29, 1957 (72 Stat. (pt. 2) c l6 ), proclaimed, effective after the close of business on December 30, 1957, and until the President otherwise proclaimed, a modification of the concession with respect to the types of safety pins identified in the first recital of this proclamation to effect an increase in the rate of duty with respect to such safety pins;
3. WHEREAS, after compliance with the requirements of Section 102 of the Tariff Classification Act of 1962 <76 Stat. 73), the President by Proclamation No.
4. WHEREAS, following my request under Section 351(d) (2) of the Trade Expansion Act of 1962 (19 US.C. 1981(d) (2 )) , the United States Tariff Commission conducted an investigation, including a hearing, pursuant to Section 351(d)(5) of that Act (19 U.S.C. 1981(d) (5 )) , and on May 17, 1965, submitted to me a report <30 F.R. 6891) advising me of its judgment as to the probable economic effect on the domestic industry concerned of the reduction or termination of the increased rate of duty effected by Proclamation No. 3212 (now reflected, with modifications, in item943.10 of the Appendix to the Tariff Schedules of the United States);
5. WHEREAS, in relation to the possible reduction or termination of such increased rate of duty, I have received and taken into account the advice from the Tariff Commission, advice of the Secretary of Commerce and the Secretary of Labor in accordance with Section 351 (c)(1 )(A ) of the Trade Expansion Act of 1962 (19 U.S.C. 1981(c)(1 )(A )), recommendations of the Special Representative for Trade Negotiations in accordance with Sections 3(b), 3( j ) , and 5(c) of Executive Order No. 11075 of January 15, 1963 <48 CFR 1.3(b), 1.3(j), and 1.5(c)), and advice of other interested agencies of the Government; and
6. WHEREAS, in accordance with Section 351(c) (1 )(A ) of the Trade Expansion Act of 1962, I have determined that the termination, as herein proclaimed, of the increased rate of duty effected by Proclamation No. 3212 (now reflected, with modifications, in item943.10 of the Appendix to the Tariff Schedules of the United States) is in the national interest:
NOW, THEREFORE, I, LYNDON B. JOHNSON, President of the United States o f America, acting under the authority vested in me by the Constitution and the statutes, including Section 351 •(c) (1) CA) of the Trade Expansion Act
of 1962, and in accordance with the provisions of Article X IX of the General Agreement, do proclaim that:
(1) Proclamation No. 3212 is terminated.
(2) Item 943.10 (reflecting, with modifications, Proclamation No. 3212 which effected the increased rate of duty) is deleted from the Appendix to the Tariff Schedules of the United States.
(3) The concession with respect to the types of safety pins identified in the first recital of this proclamation shall be applied to such of those articles as are entered, or withdrawn from warehouse, for consumption on or after the date of this proclamation, in accordance with the provisions of item 745.56 of the Tariff Schedules of the United States.
IN WITNESS WHEREOF, I have hereunto set my hand and caused the Seal of the United States of America to be affixed.
DONE at the City of Washington this twenty-eighth day of January in the year
of our Lord nineteen hundred I seal 3 and sixty-six, and of the Inde
pendence of the United States of America the one hundred and ninetieth.
Lyndon B. Johnson
By the President:
Dean Rusk,Secretary of State.
p a r t 1 9— PROCLAM ATION OF TRADE AGREEMENT WITH UNITED KINGDOM PROVIDING COMPENSATORY CONCESSIONS
BY THE PRESIDENT OF THE UNITED STATES OF AMERICA
P roclam ation N o . 3712
1. WHEREAS, pursuant to Section 350 of the Tariff Act of 1930, the President, on October 30, 1947, entered into, and by Proclamation No. 2761A of December 16, 1947 (61 Stat. (pt. 2) 1103), proclaimed, the General Agreement on Tariffs and Trade (hereinafter referred to as “ the General Agreement” ) , including a schedule of United States concessions, designated as Schedule XX, annexed thereto (61 Stat. <pt. 5) A1157), which Agreement, schedule, and proclamation have been supplemented by subsequent agreements, schedules, and proclamations;
2.,WHEREAS, after compliance with the requirements of Section 102 o f the Tariff Classification Act of 1962 (76 Stat. 73), the President by Proclamation No. 3548 of August 21, 1963 (77 Stat. 1017), proclaimed, effective on and after August 31, 1963, the Tariff Schedules of the United States, which reflected, with modifications, and, in effect, superseded, Proclamation No. 2761A and proclamations supplementary thereto insofar as they relate to Schedule X X to the General Agreement;
3. WHEREAS, pursuant to Sections 221 and 224 of the Trade Expansion Act of 1962 (19 U.S.C. 1841 and 1844), the President, on October 21,1963, published
FEDERAL REGISTER, VOL. 31, NO. 93— FRIDAY, MAY 13, 1966
RULES AND REGULATIONS 7035
and furnished to the Tariff Commission lists of articles which may be considered for modification or continuance of duties or other import restrictions, or continuance of duty-free or excise treatment, in the negotiation of trade agreements, including the trade agreement with the United Kingdom identified in the eighth recital of this proclamation, compensating other nations for modifications or withdrawals of United States trade agreement concessions (48 CFR Part 180), and the Tariff Commission, after holding public hearings, has advised the President with respect to each such article of its judgment as to the probable economic effect of such modifications;
4. WHEREAS, pursuant to Sections 223 and 224 of the Trade Expansion Act of 1962 <19 U.S.C. 1843 and 1844) and in accordance with Section 3(g) of Executive Order No. 11075 of January 15, 1963 (48 CFR 1.3(g)), the Special Representative for Trade Negotiations, appointed by the President pursuant to Section 241(a) of the Trade Expansion Act of 1962 (19 TT.S.C. 1871(a)), on April 23, 1963, designated the Trade In formation Committee to afford an opportunity, through public hearings and other means, for any interested person to present his views concerning any article on the lists identified in the third recital of this proclamation or any other matter relevant to the trade agreement negotiations, including the negotiation of the trade agreement with the United Kingdom identified in the eighth recital of this proclamation (48 CFR Part 202), and the Trade Information Committee has furnished the President with a summary of its hearings;
5. WHEREAS, pursuant to Section 222 of the Trade Expansion Act of 1962 (19 U.S.C. 1842), the President has received information and advice with respect to the trade agreement with the United Kingdom identified in the eighth recital of this proclamation, from the Departments of Agriculture, Commerce, Defense, Interior, Labor, State, and the Treasury, and from such other sources as the President has deemed appropriate, and, pursuant to Section 241(b) of the Trade Expansion Act of 1962 (19 U.S.C. 1871(b) ), the Special Representative for Trade Negotiations has-received information and advice with respect to that agreement from representatives of industry, agriculture, and labor, and from such agencies as he has deemed appropriate;
6. WHEREAS, pursuant to Section 201(a) (1) of the Trade Expansion Act of 1962 (19 U.S.C. 1821(a) (1) ), the Special Representative for Trade Negotiations has conducted negotiations on behalf of the President with the United Kingdom and other contracting parties to the Garerai Agreement, in accordance with Article XXVHI of that Agreement (8 U.S.T. (pt. 2) 1790), with a view to the establishment of a new consolidated Schedule X X to that Agreement in {terms of the Tariff Schedules of the United States;
7. WHEREAS, pursuant to Section 201(a) of the Trade Expansion Act of 1962, the President has determined that certain existing duties or other import re
strictions of the United States or of foreign countries which are contracting parties to the General Agreement, were unduly burdening and restricting the foreign trade of the United States and that one or more of the purposes stated in Section 102 of the Trade Expansion Act of 1962 (19 U.S.C. 1801) would be promoted by entering into the trade agreement with the United Kingdom identified in the eighth recital of this proclamation;
8. WHEREAS, pursuant to Section 201(a) (1) of the Trade Expansion Act of 1962, I, through my duly empowered representative, have entered into a trade agreement with the United Kingdom entitled the “ Interim Agreement Between the United States and the United K in g-, dom Relating to the Renegotiation of Schedule X X (United States) to the General Agreement on Tariffs and Trade” (a copy of which is Appendix B to this proclamation1), which embodies the results of the negotiations with the United Kingdom as part o f the negotiations under Article XXV i l l of the General Agreement for the establishment of a new consolidated Schedule X X thereto in terms of the Tariff Schedules of the United States ;
9. WHEREAS the trade agreement with the United Kingdom identified in the eighth recital of this proclamation, which is an agreement supplementary to the General Agreement, contains in annex n a schedule of concessions, to take effect as provided therein, in compensation for the impairment, arising out of the entry into force of the Tariff Schedules of the United States, o f the rights of the United Kingdom in concessions in Schedule X X to the General Agreement, and provides that such concessions shall be applied as if they were included in a Schedule X X to the General Agreement pending the formal effectiveness of a new consolidated Schedule XX ;
10. WHEREAS, pursuant to Section 254 of the Trade Expansion Act of 1962 (19 U.S.C. 1884) , I have determined that, in the case of those modifications of existing duties proclaimed in this proclamation which reflect decreases in duties exceeding the limitations specified in Section 201(b)(1) or 253 of the Trade Expansion Act of 1962 (19 U.S.C. 1821(b) (1) or 1883), such decreases will simplify the computation of the amount of duty imposed with respect to the articles concerned; and
11. WHEREAS, pursuant to Section 201(a) (2) of the Trade Expansion Act of 1962, I determine that the modification
or continuance of existing duties or other import restrictions, and the continuance of existing duty-free or excise treatment, hereinafter proclaimed, will be required or appropriate to carry out such trade
^NOW , THEREFORE, I, LYNDON B. JOHNSON, President of the United States of America, acting under the authority vested in me by the Constitution and the statutes, including Section 201(a) (2) of the Trade Expansion Act of 1962, do proclaim that:,(1 ) Subject to the applicable provi
sions of the trade agreement with the United Kingdom identified in the eighth recital of this proclamation and of the General Agreement and other agreements supplementary thereto, the modification or continuance of existing duties or other import restrictions, and the continuance of existing duty-free or excise treatment, provided for in the schedule in annex n to such agreement with the United Kingdom shall be effective as provided therein, and, as a result thereof,
(2) The Tariff Schedules of the United States shall be modified, effective on and after May 1,1966, as provided for in Appendix A to this proclamation.
IN WITNESS WHEREOF, I have hereunto set my hand and caused the Seal of the United States of America to be affixed.
DONE at the City of Washington this fifth day of April in the year of our Lord
nineteen hundred and sixty-six, [ seal] and of the Independence of the
United States of America the one hundred and ninetieth.
L yndon B. Johnson
By the President:Dean Rusk,
Secretary of State.APPENDIX A
M odifications of the Tariff Schedules of the U nited States Resulting From the Proclamation of the Interim Agreement Between the United States and the United K ingdom Relating to the Renegotiation of Schedule X X (United States) to the G eneral Agreement on Tariffs and T rade
The rate in column numbered 1 for each item of the Tariff Schedules of the United States which is identified in the following table shall be superseded_, effective on each date shown in such table, by the respective rate set forth therein opposite the number of such item :
TSUSitem
Rates of duty, effective with respect to articles entered, or withdrawn from warehouse, for consumption on and after May 1, —
1966 1967 1968 1969 1970
222.6063L37792.60
24% ad vai. 40% ad vai. 11% ad vai.
23%advaL 36% ad vai. 11% ad vaL
22% ad vai. 31% ad vai. 10% ad vai.
21% ad vai. ‘27% ad vai.
9% ad vai.
20% ad vai. 22.5% ad vai. 8% ad vai.
Office of the Special Representative for Trade Negotiations,John B. Rehm, General Counsel.
[F.R. Doc. 66-5202; Filed, May 12, 1966; 8:45 a.m.]
1 Filed as part of the original document.
FEDERAL REGISTER, VOL. 31, NO. 93— -FRIDAY, MAY 13, 1966
7036 RULES AND REGULATIONS
Title 32A— NATIONAL DEFENSE, APPENDIX
Chapter VI— Business and Defense Services Administration, Department of Commerce
[BDSA Order M-11A, Rev. Schedule A of May 13,1966]
M -ll A— COPPER AND COPPER- BASE ALLOYS
Schedule A— Set-Aside PercentagesThis amendment of Schedule A to
BDSA Order M - ll A is found necessary and appropriate to promote the national defense and is issued pursuant to the Defense Production Act of 1950, as amended. In the formulation of this order, there was consultation with industry representatives, including trade association representatives, and consideration was given to their recommendations.
This amendment further changes Revised Schedule A of February 11, 1966, to BDSA Order M - ll A, as amended December 18, 1956, by increasing the set- aside percentage for copper-base alloy rod, bar, shapes, and wire from 9 percent to 11 percent. This amendment applies to authorized controlled material orders calling for delivery after June 30, 1966.
Schedule A to BDSA Order M - ll A is hereby further amended to read as follows:
Schedule A to BDSA Order M -l l A
Set-aside Percentages (See sec. 6 (f) of BDSA Order M - l l A ).
Base period— Calendar Year 1964 (See sec. 2(o) of BDSA Order M - l l A ),
Percentage for orders calling for delivery
Product after June 30,1966 1Brass mill products:
Unalloyed:Plate, sheet, strip and rolls______ 6Rod, bar, shapes, and wire______ 6Seamless tube and pipe___________ (2)
Alloyed:Plate, sheet, strip, and rolls______ 6Rod, bar, shapes, and wire______ l lSeamless tube and pipe______________ 16Military ammunition cups and
discs_____ _______________ ______ _ (2)Copper wire mill products:
Copper wire and cable:Bare and tinned_______________ _ eWeatherproof______________________ 6Magnet wire_______________________ 15Insulated building wire_______, __ 6Paper and lead power cable___:'i__ 6Paper and lead telephone cable. __ 6Asbestos cable___________________ __ 6Portable and flexible cord and
cab le____ ______________________ 6Communications wire and cable-. 6Shipboard cable_________________ 6Automotive and aircraft wire and
cab le_________________________ 6Insulated power cable______ _____ 6
Percentage for orders calling for delivery
Product after June 30, 1966 1Copper wire mill products— Continued
Copper wire and cable— ContinuedSignal and control cable____ » ___ 6
0 Coaxial cable.______________________ 6Copper-clad steel wire containing
over 20 percent copper byweight regardles of end use___ 6
Copper foundry products______________ 3Unalloyed copper powder mill prod-
U C t S _ _ _______________________________________ ________ (2 )
Copper-base alloy powder mill products__________________________________/2\
1 Schedule A revised as of Feb. 11, 1966, to BDSA Order M - l l A, as amended Dec. 18, 1956, applies to orders calling for delivery prior to July 1, 1966.
2 No reserve space provided. Producers of , these products are nevertheless required to
accept authorized controlled material orders for such products in accordance with .the provisions of DMS Regulation No. 1 and this order. However, section 6 (f) of Order M - 11A does not apply to such authorized controlled material orders.
(Sfec. 704, 64 Stat. 816, as amended; 50 U.S.C. App. 2154; sec. 1, P.L. 88-343, 78 Stat. 235)
This revised schedule shall take effect May 13, 1966.
Business and Defense Services Administration,
Forrest D. Hockersmith,Acting Administrator.
[F.R. Doc. 66—5284; Filed, May 12, 1966; 8:51 a.m.]
Title 15— COMMERCE AND FOREIGN TRADE
Chapter III— Bureau of International Commerce, Department of CommerceSUBCHAPTER B— EXPORT REGULATIONS
[10th Gen. Rev. of Export Regs., Arndt. 15]
MISCELLANEOUS AMENDMENTSParts 369, 372, 373, 382, and 399 of
Title 15 of the Code of Federal Regulations are amended as set forth below.(Sec. 3, 63, Stat. 7; 50 U.S.C. App. 2023; E.O. 10945, 26 F.R. 4487, 3 CFR 1959-1963 Comp.: E.O. 11038, 27 F.R. 7003, 3 CFR 1959- 1963 Comp.)
Effective date: April 1, 1966.
Rauer H. M eyer,Director, Office of Export Control.
I. Revision of reporting requirement on foreign restrictive trade practices or boycotts.1
Purpose and effect: The reporting requirement described in, § 369.2 of the Comprehensive Export Schedule which
1 The reporting requirements contained herein have been approved by the Bureau of the Budget in accordance with the Federal Reports Act of 1942.
relates to requests for information or action in support of certain foreign restrictive trade practices or boycotts has been revised to provide a more convenient method of reporting these requests to the Office of Export Control.
Instead of submitting a report covering each transaction for which a request is received, the exporter may now elect to submit a report covering all transactions for which he received such requests during a calendar quarter from a single foreign person or firm. This revision affects only the time and method of reporting foreign restrictive trade practices to the Office of Export Control. It does not make any change in the substance of the information which must be reported. The quarterly report shall contain the same information now required for individually submitted reports and shall be submitted to the Office of Export Control as specified in the revised regulations not later than the 15th day of the first month following the calendar quarter covered by the report.
Effective date of action: April 1, 1966. Accordingly, § 369.2 is amended to
read as set forth below.I I. Postal Z IP codes required on
addresses.Purpose and effect: United States
Government Postal regulations require the use of ZIP Codes on all outgoing official government mail. These Codes are required as an integral part of an address.
In order to conform to these regulations when mailing export licenses, and in general correspondence with exporters, the Office of Export Control must have the addressee’s ZIP Code available. Therefore, applicants must show ZIP Codes in Items 6 and 7 of “Applications for Export License” (Form FC-419), on requests for status of pending applications, and on all other correspondence with this Office. By so doing, the exporter is helping the Office of Export Control avoid delay in serving him.
Effective date of action: April 1, 1966. Accordingly, Items 6 and 7 of
§ 372.5(a) (4») are amended to read as set forth below.
I I I . Additional countries adhering to limited niiclear test ban treaty. ,
Purpose and effect: Section 373.7 of the Comprehensive Export Schedule sets forth the procedures to be followed when exporting commodities and technical data related to nuclear weapons, nuclear explosive devices, or nuclear testing. Certain provisions of these regulations do not apply to destinations subject to the jurisdiction of a country which is an adherent to the “Limited Nuclear Test Ban Treaty” (see list of countries adhering to this treaty in Part 373, Supplement No. 4 of the Comprehensive Export Schedule.
The following five countries, having deposited instruments of ratification with the U.S. Department of State on
FEDERAL REGISTER, VOL. 31, NO. 93— FRIDAY, MAY 13, 1966
RULES AND REGULATIONS 7037
the dates listed below, are now added to the list:
Country DateBelgium__— - — - — ------------------- Mar. 1, 1966Congo (Leopoldville)___________ Oct. 28, 1965Morocco__________________ - ____ Feb. 21, 1966Panama_________________ Peb. 24, 1966Philippines______________________ Nov. 15, 1965Sudan___________________ Mar. 4, 1966
Accordingly, Supplement No. 4 to Part 373 is amended to read as set forth below.
IV. Amendment of denial and probation orders (supp. No. 1 to Part 382) . .
The denial and probation orders, Supplement No. 1 to Part 382, are revised as set forth below.
V. Amendment of the commodity control list.
A. Amendment of country controls for certain commodities. Effective 12:01 a.m., April 1, 1966, the symbols “T ” and/qr “V " in the Commodity Control List column titled “Validated License Required for Country Groups Shown Below” are deleted for the commodities listed below. Therefore, a validated license is no longer required for exports of these commodities to Country Group T and/or V except as indicated in § 371.7(d) with regard to shipments to Southern Rhodesia, and in the applicable footnotes below with regard to shipments to the Republic of South Africa and Indonesia.
B. Other amendments. The Commodity Control List is also amended as set forth below, effective April 1, 1966, unless otherwise specified and unless an exportation is being made to Southern Rhodesia (see § 371.7(d) regarding exports to Southern Rhodesia). Exporters are advised that only the items listed below opposite the specific Export Control Commodity Numbers are affected by these changes. The unnumbered captions serve only to identify the broad categories of commodities within which these items are to be found in Schedule B. (See saving clause in Part C below.)
Two different types of explanatory numerical references are used at the end of a commodity description:
(a) A numerical reference enclosed in parentheses to indicate the entry being amended. For example, where an amended entry is followed by (1), this indicates that the new entry amends the first entry presently on the Commodity Control List under the same Export Control Commodity Number; if the entry is followed by a (2), it amends the second entry on the Commodity Control List, etc.
(b) A footnote reference referring to the footnote below, which explains the effect of the amendment.
C. Saving clause. Shipments of commodities removed from general license as a result of amendments set forth In Part B above which were on dock for lading, on lighter, laden aboard an exporting carrier, or in transit to a port of exit pursuant to actual orders for export prior to 12:01 a.m., April 8, 1966, may be exported under the previous general license provisions up to and including May 2, 1966. Any such shipment not laden aboard the exporting carrier on or
before May 2, 1966, requires a validated license for export.
PART 369— REQUEST FOR INFORMATION OR ACTION IN SUPPORT OFCERTAIN FOREIGN RESTRICTIVE TRADE PRACTICES OR BOYCOTTS
§ 369.2 Reporting requirement.(a) Scope. In order to implement the
policy set forth in § 369.1 above, a reporting requirement is established. The provisions of this § 369.2 apply to any U.S. exporter who receives a request for any action, including the furnishing of information or the signing of agreements, which has the effect of furthering or supporting a restrictive trade practice or boycott fostered by any foreign country against any country not included in Country Group W, Y, or Z.2 (See N ote at end of § 369.2 for examples of restrictive trade practices or boycotts.)
(b) Report required from U.S. exporter. Any U.S. exporter who receives a request relating to a restrictive trade practice or boycott as described in paragraph (a) of this 'section, shall report the request to the U.S. Department of Commerce, Office of Export Control, Attention: 8540, Washington, D.C., 20230. The exporter’s report may be submitted in accordance with the procedure set forth in either subparagraph (1) or (2) of this section.
(1) Report covering single transaction. (i) I f the report covers only a single transaction it shall be submitted to the Office of Export Control within 15 business days from the date of its receipt. This report shall be made on Form IA - 1014, U.S. Exporter’s Report of Request Received for Information, Certification, or Other Action Indicating a Restrictive Trade Practice or Boycott Against a Foreign Country3 (see supp. S-26 for facsimile of form). I f the request is for information and is received in the form of a questionnaire, a copy of this questionnaire shall accompany the report. Copies of requests received in other forms need not be submitted with the report, but appropriate quotations from the request shall be included in the report.
(ii) Whenever an exporter receives more than one request for action with reference to the same export transaction, only the first request need be reported to the Office of Export Control.
(2) Report covering multiple transactions. Instead of submitting a report for each transaction regarding which a request is received, the exporter may submit a report covering all transactions regarding which requests are received from a single person or firm during a single calendar quarter. This report shall be made by letter and shall be submitted to the Office of Export Control no later than the 15th day of the first month following the calendar quarter covered by the report. The report shall include the in-
2 Country Groups are listed in § 370.1(g).3 Blank copies of Form IA-1014 may be
obtained from any U.S. Department of Commerce field office, or from the U.S. Department of Commerce, Office of Export Control, Washington, D.C., 20230.
formation shown below. I f the exporter has received requests from more than one foreign person or firm, a separate report shall be submitted for each person or firm. Each letter shall include the following information:
(i) Name and address of U.S. exporter submitting report ;
(ii) Calendar quarter covered by report;
(iii) Name of country(îes) against which the request is directed;
(iv) Date(s) request (s) was (were) received;
(v) Name and address of requestor;(vi) Number of transactions to which
restrictions were applicable;(vii) Type(s) of request(s) received.
( I f questionnaire, attach copy. I f other than questionnaire, give the type of document or other form of request and the specific information or action requested.) ;
(viii) Quantity, description, and value of the commodities or technical data covered by the request(s). (The description of the commodities or technical data may conform to the description on the order or to usual commercial terminology and may, but need not be, in terms, of the Commodity Control List or Schedule B.) ; and
(ix) Whether or not the U.S. exporter submitting the report intends to comply with the request(s). (Submission of the information required by this paragraph (ix) would be helpful to the U.S. Government but is not mandatory.)
Note: The above § 369.2 refers to "a request for any action * * * which has the effect of furthering or supporting a restrictive trade practice or boycott fostered by any foreign country against any country not included in Country Group W, Y, or Z. * * * ” These requests may be received by U.S. exporters in the form of general questionnaires to be answered, specific statements or certifications to be supplied in particular transactions, or other types of requests for action. Shown below are some examples of types of requests which could indicate the furthering or supporting of restrictive trade practices or boycotts.
1. A request for information as to whether the U.S. exporter or any subsidiary or affiliate of the U.S. exporter has, or intends to have, any stockholders, owners, employees, or officers who are nationals of a boycotted country.
2. A request for information as to whether the U.S. exporter or any subsidiary or affiliate of the U.S. exporter has, or intends to have, any stockholders, owners, employees, or officers who are members of a religious organization or of a race, creed, or color generally associated with a boycotted country.
3. A request for information as to whether the U.S. exporter or any subsidiary or affiliate of the U.S. exporter has, or intends to have, any business relationship with a boycotted country or a national of a boycotted country. These business relationships include but are not limited to trade in commodities or technical know-how, licensing arrangements, advertising, or promotion of sale of goods originating in a boycotted country, or use of such goods as components in a manufacturing process.
4. A request for information as to whether the U.S. exporter or any subsidiary or affiliate of the U.S. exporter does any business, or intends to do any business, with any firm which has a business relationship with a boycotted country or a national of a boycotted country.
FEDERAL REGISTER, VOL. 31, NO. 93— FRIDAY, MAY 13, 1966
7038 RULES AND REGULATIONS5. A request for Information as to whether
the U.S. exporter or any subsidiary or affiliate of the U.S. exporter has any Investments, including branches, subsidiaries, affiliates, or holdings, or any commercial or legal representation in a boycotted country or in a business firm located in, or doing business in, a boycotted country.
6. A request for information as to whether the U.S. exporter or any subsidiary or affiliate of the U.S. exporter uses, or intends to use (a ) shipping or transportation facilities owned, controlled, operated, or chartered by a boycotted country or a national of a boycotted country, or (b ) a carrier which stops at a port in a boycotted country.
The above examples of types of requests which could indicate the furthering or supporting of restrictive trade practices or boycotts are merely illustrative, and are not intended in any sense to be the only examples of restrictive trade practices or boycotts.
PART 372— PROVISIONS FOR INDIVIDUAL AND OTHER VALIDATED LICENSES
§ 372.5 How to file an application for a validated license.
(a) Form and manner of filing. * * *(4) Preparation of Form FC-419. * * *Item 6. The name and address of the
applicant must be entered. The Postal ZIP Code must be included as it is an integral part of the address. Failure to include ZIP Code on an application may result in delay in mailing of the export license.
Item 7. The name and address of the person, other than applicant, authorized by the applicant to receive the license, if issued, should be entered. The Postal ZIP Code must be included as It is an integral part of the address. Failure to Include ZIP Code on an application may result in delay in mailing of the export license. The license will be transmitted only to the applicant or to the person designated on the license application as the person entitled to receive the license on behalf of the licensee. The license will not be transmitted direct to the Customs Office at the port of exit, except for an emergency clearance, as set forth in § 372.5 (i) and in the Note following § 372.13 of the Comprehensive Export Schedule.
* * v * *
PART 373— LICENSING POLICIES AND RELATED SPECIAL PROVISIONS
Supplement No. 4. Countries Adhering to the Limited Nuclear Test Ban Treaty is amended as follows:
For purposes of the Export Regulations a country will be treated as an adherent to the Limited Nuclear Test Ban Treaty if it has deposited with the U.S. Department of State in Washington,D.C., an instrument of ratification or accession to that Treaty (or an unrestricted notification that it considers itself bound by the ratification or accession of a predecessor government). The following countries are adherents to the Limited Nuclear Test Ban Treaty:Afghanistan.Australia.Austria.Belgium.Bolivia.Brazil.Bulgaria.Burma.
Canada.Central African
Republic.CeylonChad.China (Republic o f). Congo (Leopold-
viUe).
Cyprus.Czechoslovakia.Dahomey.Denmark.Dominican Republic. Ecuador.El Salvador.Finland.Gambia.Gabon.West Germany (Fed
eral Republic of Germany).
Ghana.Greece.Guatemala.Honduras.Hungary.Iceland.India.Indonesia.Iran.Iraq.Ireland.Israel.Italy.
Ivory Coast.Japan.Jordan.Kenya.Korea (Republic o f). Kuwait.Laos.Lebanon.Liberia.Luxembourg. Malagasy Republic. Malawi.Malaysia.Malta.Mauritania.Mexico.Morocco.Nepal.Netherlands (includ
ing Surinam and Netherlands Antilles).
New Zealand. Nicaragua.Niger.Norway.
Peru.Panama.Philippines.Poland.Rumania.Rwanda.San Marino.Senegal.Sierra Leone.South Africa (Re
public o f).Spain.Sudan.Sweden.Switzerland.Syrian Arab Re
public.Thailand.
Togo.Trinidad and Tobago.
Tunisia.Turkey.Uganda.Union of Soviet
Socialist Republics.
United Arab Republic.
United Kingdom. United States. Venezuela. Western Samoa. Yugoslavia. Zambia.
PART 382— DENIAL OF EXPORT PRIVILEGES
Supplement No. 1 Table of Denial and Probation Orders Currently in Effect (§ 382.51(b)) is amended as follows:
Addition»
Name and addressEffective
dateExpiration
dates Export privileges affectedFederalRegistercitation
DeGraeve, L., Volharding- strrat 27, Antwerp, Belgium.
Trauzl-Werke Aktiengesellschaft, Scheydgasse 38-40, Vienna X X I, Austria.
Van Eeckhoven, E., Vol- hardingstraat 27, Antwerp, Belgium.
See Vanderveken, Louis.
General and validated licenses, all commodities, any destination, also exports to Canada.
See Vanderveken, Louis.
3-4-66 9-4-66 (on probation from 9-6-66 to 3-4-68).i
31 F.R. 3426 3-4-66.
1 Although the named person or firm is entitled to all export privileges during this probation period, these privileg may be revoked upon a finding that the probation has been violated.
PART 399— COMMODITY CONTROL LIST AND RELATED MATTERS
Amendments to the Commodity Control List (§ 399.1) are as follows:
A. Amendment of Country Controls for Certain Commodities (V.A. supra):
Exportcontrol
commodityNo. Commodity description
23120— Alkyl polysulfide rubbers, excluding liquid polymers.
23120— Silicone rubber, except fiuorinated silicone rubber.
23120— Copolymers of methyl vinyl-pyridine and butadiene.
27510__Synthetic diamonds suitable onlyfor industrial use.
27521__Synthetic diamond powder.27698__Natural borates and other boron
materials (including but not limited to colemanite, pandermite, kernite, priceite and ulexite).
28398 Cobalt ores and concentrates.28398 Nickel ores and concentrates.33210__Gasoline blending agents as follows:
Alkylates (aviation grade); isopentane; and neohexane.
33220__Other Jet fuels.33250__Other lubricating oils, synthetic,
which contain as the principal ingredient: (a ) Esters of dibasic saturated aliphatic acids combined with saturated aliphatic monohydric alcohols, where both of the two constituents contain six or more carbon atoms, or (b ) esters of dibasic saturated aliphatic acids combined with poiy- glycols, where one or both of the two constituents contain six or more carbon atoms.
Exportcontrol
commodityNo. Commodity description
33250— Other petroleum based aviation engine lubricating oil.
33250— Other synthetic lubricating greases which contain as the principal ingredient: (a ) Esters of dibasic saturated aliphatic acids combined with saturated aliphatic monohydric alcohols, where both of the two constituents contain six or more carbon atoms, or (b ) esters of dibasic saturated aliphatic acids combined with polyglycols, where one or both of the two constituents contain six or more carbon atoms.
51202__Diphenylamine.51205-_ Other esters of saturated mono
hydric alcohols with dibasic saturated aliphatic acids where both of the two constituents contain six or more carbon atoms.
51205— Esters of dibasic saturated aliphatic acids combined with polygycols, where one or both of the two constituents contain six or more atoms.
51209__Difluoroethane.51209— Tetrafluoromethane.51209— Barium styphnate.51209— Esters of dibasic saturated aliphatic
acids combined with polyglycols, where one or both of the two constituents contain six or more carbon atoms.
51209— Other esters of saturated monohydric alcohols with dibasic saturated aliphatic acids where both of the two constituents contain six or more carbon atoms.
FEDERAL REGISTER, V O L 31, NO. 93— FRIDAY, MAY 13, 1966
RULES AND REGULATIONS 7039
Exportcontrol
commodityNo. Commodity description
51338__Other boric acids.51350— Cobalt oxide; and cobalt hydroxide.51400__Other fluoroborates; and borates
refined.51470__Other boron compounds and mix
tures.51470-_ Cobalt carbonate; cobalt oxalate;
cobalt sulphide; and cobalt phosphide.
54199— Cobalt dental alloys containing any of the following: (a ) 50 percent or more cobalt, (b ) 19 percent or more cobalt and 14 percent or more chromium and less than 1 percent carbon, or (c) 19 percent or more cobalt and 14 percent or more chromium and 3 percent or more molybdenum.
58110__Polyester film as follows: (a ) Tensil-ized film, with thickness greater than 0.001 inch (0.0254 mm.) up to and including 0.0015 inch (0.038 mm.); and (b ) untensilized film with thickness greater than 0.0007 inch (0.018 mm.) up to and including 0.0015 inch (0.038 mm.).
58110__Other silicone rubbers and compounds.
58110__Diorgano siloxanes capable of beingpolymerized to rubbery products.
58132__Cellulose acetate film suitable fordielectric use, 0.0015 inch (0.038 mm.) or less in thickness.
59920__Weed killers, consisting primarily ofboron compounds (for example, borates, borax).
59999__Hydraulic fluids, synthetic, diestertypes.
59999__Hydraulic fluids, petroleum based,having all of the following characteristics: (a ) Kinematic viscosity of 4.6 centistokes or greater at 210° F.; (b ) pour point of minus 30° F. (minus 34° C.) or lower; and (c) viscosity under (V I) of 130 or higher.
65545__Silicone rubber insulating tape.65584__Silicone rubber packing.67160__Ferrocobalt.67313__Wire rods (including stainless), as
follows: (a ) Containing 6 percent or more cobalt, (b ) AISI type 309-S-Cb-Ta, or (c) containing a total of 35 percent or more of alloying elements.
67323-- Alloy steel bars and rods, containing 6 percent or more cobalt.
67323— Nickel-bearing steel bars and rods, as follows: (a ) AISI type 300-S- Cb-Ta, or (b ) containing a total of 35 percent or more of alloying elements.
67343— Nickel-bearing s t e e l structural shapes, not fabricated, as follows: (a ) AISI type 309-S-Cb-Ta, or (b ) containing a total of 35 percent or more of alloying elements.
67353-_ Alloy steel angles, shapes, and sections, containing 6 percent or more cobalt.
67353— Nickel-bearing steel angles, shapes and sections, hot-rolled, as follows; (a ) AISI type 309-S-Cb-Ta, or (b ) containing a total of 35 percent or more of alloying elements.
67443— Nickel-bearing steel plates and sheets, as follows: (a ) A ISI type 309-S-Cb-Ta, or (b ) containing a total of 35 percent or more of alloying elements.
Exportcontrol
commodityNo. Commodity description
67443__Other alloy steel electrical (silicon),as follows: (a ) Sheets with a core loss of 0.45 watts per pound at13.000 gausses and 50 cycles per second (0.62 watts per pound at15.000 gausses and 50 cycles per second) or less regardless of thickness, or (b ) strip with a thickness of 0.005 inch up to and including 0.008 inch (0.2 mm.), regardless of core loss characteristics or whether or not grain oriented.
67503__Nickel-bearing stainless steel strip,and skelp, hot-rolled, as follows: (a ) AISI type 309-S-Cb-Ta, or (b ) containing a total of 35 percent or more of alloying elements.
67503__Nickel-bearing stainless steel strip,and skelp, cold-rolled, as follows:(a ) AISI type 309-S-Cb-Ta, or (b ) containing a total of 35 percent or more of alloying elements.
67503 _Alloy steel electrical (silicon) asfollows: {a ) Strip with a core loss of 0.45 watts per pound at 13,000 gausses and 50 cycles per second (0.62 watts per pound at 15,000 gausses and 50 cycles per second) or less regardless of thickness, or(b ) Strip with a thickness of 0.005 inch up to and including 0.008 inch (0.2 m m .), regardless of core loss characteristics or whether or not grain oriented.
67504 _Other carbon steel, electrical (silicon) steel as follows: (a ) Strip with a core loss of 0.45 watts per pound at 13,000 gausses and 50 cycles per second (0.62 watts per pound at 15,000 gausses and 50 cycles per second) or less regardless of thickness, or (b ) strip with a thickness of 0.005 inch up to and including 0.008 inch (0.2 m m .), regardless of core loss characteristics or whether or not grain oriented.
67703__Alloy steel wire, as follows: Glass tometal sealing alloys containing 6 percent or more cobalt.
67703__Nickel-bearing steel wire, as follows: (a ) AISI type 309-S-Cb-Ta, or (b ) containing a total of 35 percent or more of alloying elements.
67920__Nickel-bearing stainless steel castings as follows, except stainless steel grinding balls; (a ) AISI type 309-S-Cb-Ta, or (b ) containing a total of 35 percent or more of alloying elements.
67930 Nickel-bearing stainless steel forgings as follows, excluding grinding balls: (a ) AISI type 309-S-Cb-Ta, or (b ) containing a total of 35 percent or more of alloying elements.
68321 _Thermocouple nickel chrome wireup to and including 5.0 mm. in diameter, except nickel-chrome electric resistance wire.
68322 _Thermo bimetal, thermometal, andthermostatic metal, chief value nickel.
68950__Cobalt metal waste and scrap.68950— Cobalt alloy metal waste and scrap,
special types only.68950__Cobalt metal powders; and cobalt
alloy metal powders, special types only.
68950— Other cobalt metal, wrought or unwrought.
68950— Other cobalt alloy metal, wrought or unwrought, special types only.
Exportcontrol
commodityNo. Commodity description
68950__Thermo bimetal, thermometal, andthermostatic metal, n.e.c.
69110__Nickel-bearing stainless steel roofing sheets, siding sheets, and perforated sheets, as follows: (a ) AISI type 399-S-Cb-Ta, or (b ) containing a total of 35 percent or more of alloying elements.
69524__Other surface-broaching tools.69524__Parts, n.e.c., specially designed for
other surface-broaching tools.69887— Welding rods and wires, iron and
steel, as follows: (a ) Containing 6 percent or more cobalt, (b ) AISI type 309-S-Cb-Ta, or (c) containing a total of 35 percent or more of alloying elements.
69887-- Cobalt metal welding rods, wires, and electrodes (including brazing rods).
69887__Cobalt alloy welding rods, wires,and electrodes (including brazing rods), containing any of the following: (a ) 50 percent or more cobalt, (b ) 19 percent or more cobalt and 14 percent or more chromium and less than 1 percent carbon, or (c ) 19 percent or more cobalt and 14 percent or more chromium and 3 percent or more molybdenum.
69887__Nickel alloy welding rods, wires,and electrodes (including brazing
f rods) containing 32 percent or more nickel, excluding those of nickel-copper alloys containing not more than 6 percent of other alloying elements.
69891— Electrical steel punchings, as follows: (a ) With a core loss of 0.45 watt per pound at 13,000 gausses and 50 cycles per second (0.62 watt per pound at 15,000 gausses and 50 cycles per second) or less regardless of thickness, or (b ) with a thickness o f 0.005 inch up to and including 0.008 inch (0.2 mm.) regardless of core loss characteristics or whether or not grain oriented.
69899— Cobalt metal castings and forgings;and cobalt alloy castings and forgings containing any of the following: (a ) 50 percent or morecobalt, (b ) 19 percent or more cobalt and 14 percent or more chromium or less than 1 percent carbon, or (c) 19 percent or more cobalt and 14 percent or more chromium and 3 percent or more molybdenum.
69899— Nickel alloy castings and forgings containing 32 percent or more nickel, except nickel-copper alloys containing not more than 6 percent of other alloying elements.
71110— Other water tube boilers, marine type, designed to operate at temperatures above 850 degrees F. and specially designed parts.
71120— Boiler superheaters, feedwater heaters, and economizers, for other marine steam boilers designed to operate at temperatures above 850 degrees F., and specially designed parts and accessories.
71150— Steam turbines designed for turbogenerators 200,000 kilowatts and over; and parts and accessories, n.e.c.
71130— Other diesel engines, 1,500 brake horsepower and over, with rotary speeds of 700 r.p.m. and over.
No. 93------ 3 FEDERAL REGISTER, V O L 31, NO. 93— FRIDAY, MAY 13, 1966
7040 RULES AND REGULATIONSExportcontrol
commodityNo. Commodity description
71150— Parts and accessories specially designed for diesel engines 1,500 brake horsepower and over with rotary speeds of 700 r.p.m. and over.
71181— Parts, n.e.c„ specially fabricated for water turbines and water engines200.000 kilowatts and over.
71510— Right angle (T ) lathes (in whichthe bed is at right angle to the spindle).
71510— Spar millers.71510— Turbine blade profiling and dupli
cating milling machines.71510— Turbine blade milling machines,
n.e.c.71510__Contour band sawing and band fil
ing machines designed to permit operator to select rate of cutting speed and to vary such speed while in operation, and to maintain at all times the desired rate of speed with a variation of less than 2 percent.
71510— Spin-forming machines with drive motors of 15 up to and including 25 horsepower, capacity.
71510— Other hydraulic or mechanical presses with rated capacities of2.000 tons up to and including5.000 tons.
71852__Standard equipment designed forautomatic exhaust sealing of standard entertainment type 7-pin miniature and 9-pin noval tubes.
71915— A ir conditioners, for aircraft; and specially designed parts.1
71919— Machines and equipment specially designed for use at temperatures below minus 130° C. (minus 202° F .); and specially designed parts, circuits on aircraft.1
71919__Heat exchangers, oil coolers andliquid coolers specially designed for aircraft; and parts.1
71921— Other pumps designed to operate at temperatures below minus 200° F. (minus 130° C .).
71921— Other centrifugal pumps designed to operate at speeds of 7,000 rpm or over and to produce pressures of 800 psi or over and having all flow-contact surfaces made of 10 percent or more chromium or nickel, either separately or combined.
71921— Pumps specially designed for aircraft (fuel, fuel booster, hydraulic, water, etc.); and parts and attachments therefor.1
71922— Vacuum pumps, air compressors,fans, and blowers specially designed for aircraft.1
71922— Parts specially designed for aircraftvacuum pumps, air compressors, fans and blowers.1
71923— Separators and collectors speciallydesigned for use at temperatures below minus 130° C. (minus 202° F.); and specially designed parts.
71951— Optical curve generators capable of producing aspherical curves without the use of mating surfaces.
71954— Other surface-broaching tools.71954— Parts, accessories, and attachments
specially designed for spinforming machines with drive motors 15 up to and including 25 horsepower.
71970— Ball and roller bearings specially designed for service at temperatures below minus 130® C. (minus 202° F . ) ; and specially designed parts.
‘ A validated license continues to be required for exports of this commodity to the Republic of South Africa and Indonesia.
Exportcontrol
commodityNo. Commodity description
71970— Other ball and cylindrical roller bearings having tolerances of BEC 6 or closer; and specially designed parts.
71970— Other ball and roller bearings, aircraft type; and specially designed parts.1
71980— Processing vessels specially designed for use at temperatures below minus 130° C. (minus 202° F .); and specially designed parts and accessories,n.e.c.
71980— Standard equipment designed for automatic or semiautomatic get- tering of standard entertainment- type 7-pin miniature and 9-pin noval tubes.
71992— Other valves, cocks, or pressure regulators designed to operate at temperatures below minus 130® C. down to and including minus 170° C.; or incorporating 50 percent or more cobalt or molybdenum, either separately or combined; and specially designed parts.
72210— Electric motors, D.C. and A.C., specially designed for aircraft.1
72210— Other servo motors.72210— Electric power generating mobile
units of 5,000 kilowatts or over.272210— Generators and generator sets of
200,000 kilowatts or over.272210— Parts and accessories specially de
signed for electric power generating mobile units of 5,000 kilowatts or over.2
72210— Parts and accessories specially designed for generators and generator sets of 200,000 kilowatts or over.2
72210— Other pulse transformers; and parts.72220— Other potentiometers using only
switched elements; and parts, n.e.c.
72220— Fuses, dimmer switches, lighting switches, power relays, and other electrical apparatus for making, breaking or protecting electrical
72310— Ignition harness and cable sets, aircraft type.1
72491— Terminal and intermediate repeateror amplifier equipment as follows: (a ) Terminal and intermediate repeater or amplifier equipment designed to transmit, carry, or receive frequencies from higher than 16 kilocycles up to and including 150 kilocycles, and (b ) terminal equipment specially designed for power lines and operating within the range of frequencies from 16 to. 1,500 kilocycles; and specialized components, parts, and accessories, n.e.c.2
72492— Telephone repeater equipment designed for frequencies from higher than 16 kilocycles up to and including 150 kilocycles; and specialized components, parts, and accessories, n.e.c.2
72499— Communications equipment, n.e.c., containing carrier current terminal or amplifier equipment designed to deliver, carry, or receive frequencies from higher than 16 kilocycles up to and including 150 kilocycles, into or in a communications system and carrier terminal equipment specially designed for power lines operating at frequencies below 1,500 kilocycles; and specialized components, parts, and accessories, n.e.c.2
* A validated license continues to be required for exports of this commodity to Indonesia.
Exportcontrol
commodityNo. Commodity description
72499— Other amplifiers, except television transmitter amplifiers, designed to operate at frequencies from 300 up to and including 500 megacycles; and specially fabricated parts and accessories, n.e.c.2
72920— Single coil tungsten filaments.72930— Color television picture tubes with
three or more electron guns.72930— Germanium photo devices with a
peak response less than 17,500 angstrom units (1.75 microns).
72941— Electrical starting and ignition equipment, n.e.c., aircraft type, and specially designed parts.1
72952— Instruments or devices capable of controlling the dimensions of a rolled product during its production, excluding X-ray equipment.
72991— Electro-magnetic and permanent magnet chucks, clamps, vices and similar work holders, specially designed for metalworking machines and machine tools requiring a validated license to all countries, except Canada but not subject to the Import Certificate/De- livery Verification procedure.
72994— Flashing, intermittent, and rotating lights for aircraft; and parts.1
72994— Aircraft alarm, warning, and signaling instruments, n.e.c. (for example, fire detectors and indicators, engine failure indicators, wheel flap, cowl flap, control position Indicators, etc.); and parts.1
72995— Other tantalum electrolytic capacitors; and parts.
72995— Ignition capacitors (condensers), and parts designed for aircraft.1
81230— Lavatories, sinks, and other sanitary and plumbing fixtures, specially designed for aircraft; and parts.1
81242— Landing lights and other lighting fixtures specially designed for aircraft.1
86172— Aircraft oxygen systems, apparatus, equipment and components, n.e.c. and specially fabricated parts, n.e.c.1
86182— Mechanical tachometers for aircraft engines.1
86182— Stroboscopes containing one or more electronic components.
86191— Other aircraft flight Instruments;and specially designed parts and accessories, n.e.c.1
86196— Aircraft instruments, n.e.c., thermometers, hydrometers, hygrometers, psychrometers, other than electrical or electronic types and other than flight or navigation instruments.1
86197— Aircraft engine instruments formeasuring, checking, or automatically controlling the flow, pressures, or other variables of liquids or gases, or for automatically controlling temperature.1
86199__Other isolation and summing typeamplifiers.
86199— Other amplifiers designed to operate at frequencies from 300 megacycles up to and including 500 megacyles.
89300— Silicone rubber manufactures, n.e.c.
FEDERAL REGISTER, V O L 31, NO. 93— FRIDAY, MAY 13, 1966
B.
Oth
er R
evis
ion
s (V
. B
. su
pra)
:1
For
mer
ly i
nclu
ded
in
Exp
ort
Con
trol
C
omm
odit
y N
o. 2
6800
# a
nu
mbe
r w
hic
h i
s n
ow o
bsol
ete.
2 T
he
entr
y is
rev
ised
to
con
form
wit
h r
evis
ion
s an
nou
nce
d b
y th
e B
ure
au o
f th
e C
ensu
s in
P
ub
lic B
ulle
tin
B
-2,
date
d Ja
nu
a
ry 1
, 19
66.
9 R
evis
ion
s* a
re m
ade
to c
onfo
rm t
he
con
trol
s to
th
ose
in e
ffec
t p
rior
to
Jan
uai
y 1,
196
5, w
her
e n
o ch
ange
has
bee
n a
nnou
nced
^ si
nce
th
at d
ate.
4 T
his
en
try
is
dele
ted
fro
m
the
Com
mod
ity
Con
trol
L
ist.
P
otas
siu
m c
hlo
ride
is
incl
ude
d in
th
e p
rese
nt
.th
ird
en
try
un
der
Exp
ort
Con
trol
Com
mod
ity
No.
561
00.
c T
he
un
it o
f qu
anti
ty i
s re
vise
d f
or
bu
ildin
g an
d m
onu
men
tal
aton
e.w
For
mer
ly i
nclu
ded
in E
xpor
t C
ontr
ol C
omm
odit
y N
o.
2751
0,
a n
um
ber
wh
ich
is
now
obs
olet
e.7
Th
e co
mm
odit
y d
escr
ipti
on
is
chan
ged
wit
h
no*
chan
ge
in
con
trol
s."
For
mer
ly i
nclu
ded
in E
xpor
t C
ontr
ol C
omm
odit
y N
o. 4
99,
a
nu
mbe
r w
hic
h i
s n
ow o
bsol
ete.
°Th
e E
xpor
t C
ontr
ol
Com
mod
ity
Nu
mb
er
is
revi
sed
to
con
fo
rm t
o re
visi
ons
ann
oun
ced
by
the
Bu
reau
o
f th
e C
ensu
s in
P
ub
lic B
ulle
tin
B-2
, da
ted
Jan
uar
y 1,
196
6.10
Th
e P
roce
ssin
g C
ode
or
Rel
ated
Com
mod
ity
Gro
up
Nu
mb
er
is c
han
ged.
11 F
orm
erly
inc
lude
d in
Exp
ort
Con
trol
Com
mod
ity
No.
618
29.
32 G
alliu
m
com
pou
nds
-ot
her
than
oxi
des,
h
ydro
xide
s an
d p
er
oxid
es
are
tran
sfer
red
fr
om
Exp
ort
Con
trol
C
omm
odit
y N
o.
5186
9 to
514
70.
J*T
he
GL
V
Dol
lar-
Val
ue
Lim
it i
s in
crea
sed
fo
r sh
ipm
ents
to
C
oun
try
Gro
up
V.
34 G
erm
aniu
m
com
pou
nds
ot
her
th
an
oxid
es,
hyd
roxi
des
and
pero
xide
s ar
e in
clu
ded
in E
xpor
t C
ontr
ol C
omm
odit
y N
o. 5
1470
.,G
For
mer
ly i
ndu
ded
in E
xpor
t C
ontr
ol C
omm
odit
y N
o. 5
4999
.M
A s
epar
ate
entr
y 4s
est
ablis
hed
to
con
form
th
e ex
por
t co
n
trol
s to
th
ose
in e
ffec
t p
rior
tp
Jan
uar
y 1,
196
5, w
her
e n
o ch
ange
ha
s be
en a
nno
un
ced
sin
ce t
hat
dat
e.37
Su
rgeo
ns*
ap
ron
s,
dele
ted
from
th
is
entr
y,
are
in
clu
ded
un
der
Exp
ort
Con
trol
Com
mod
ity
No.
841
60.
w B
atte
ry
sepa
rato
rs
and
blan
ks
are.
in
clu
ded
un
der
Exp
ort
Con
trol
Com
mod
ity
No.
729
12.
30 T
his
en
try
is
dele
ted.
T
his
co
mm
odit
y is
in
clu
ded
un
der
Exp
ort
Con
trol
Com
mod
ity
No.
898
00.
90 S
ilico
ne
rub
ber
pac
kin
g is
in
clu
ded
un
der
Exp
ort
Con
trol
C
omm
odit
y N
o. 8
9300
, an
d ot
her
ru
bber
pac
kin
g is
inc
lude
d u
nde
r E
xpor
t C
ontr
ol C
omm
odit
y N
o. 6
2988
.21
Th
is e
ntr
y is
del
eted
. A
ll e
lect
ric
blan
kets
are
in
clu
ded
un
der
Exp
ort
Con
trol
Com
mod
ity
No.
656
68.
22 F
orm
erly
in
clu
ded
in E
xpor
t C
ontr
ol C
omm
odit
y N
o. 6
5401
.27
Th
ree
entr
ies
are
subs
titu
ted
for
thre
e en
trie
s p
rese
ntl
yu
nde
r th
e sa
me
Exp
ort
Con
trol
Com
mod
ity
Nu
mb
er.
24 F
orm
erly
in
clu
ded
in E
xpor
t C
ontr
ol C
omm
odit
y N
o. - 2
7610
, a
nu
mbe
r w
hic
h i
s n
ow o
bsol
ete.
20 T
he
un
it o
f qu
anti
ty i
s ch
ange
d.22
Fou
r en
trie
s ar
e su
bsti
tute
d fo
r àn
en
try
pre
sen
tly
un
der
this
E
xpor
t C
ontr
ol C
omm
odit
y N
um
ber.
27 T
hre
e en
trie
s ar
e su
bsti
tute
d fo
r te
n e
ntr
ies
pre
sen
tly
un
der
this
Exp
ort
Con
trol
Com
mod
ity
Nu
mbe
r.88
Tw
o e
ntr
ies
are
subs
titu
ted
for
two*
en
trie
s pr
esen
tly
un
der
this
Exp
ort
Con
trol
Com
mod
ity
Nu
mb
er.
20 T
his
en
try
is d
elet
ed.
Th
e co
mm
odit
y is
in
clu
ded
un
der
Ex
p
ort
Con
trol
Com
mod
ity
No.
282
00.
w T
hre
e en
trie
s ar
e su
bsti
tute
d fo
r tw
o en
trie
s pr
esen
tly
un
der
this
Exp
ort
Con
trol
Com
mod
ity
Nu
mb
er..
91 S
epar
ate
entr
ies
for
cadm
ium
, an
d zi
rcon
ium
co
nta
inin
g <5
0 p
erce
nt
or
less
zir
con
ium
, ar
e de
lete
d, a
nd
th
ese
met
als
are
n
ow i
ncl
ude
d in
th
is e
ntr
y.22
For
mer
ly i
ncl
ude
d in
Exp
ort
Con
trol
Com
mod
ity
No.
719
53.
*83
A v
alid
ated
lic
ense
is
no
lon
ger
requ
ired
fo
r ex
por
tati
on t
o C
oun
try
Gro
up
X o
f ph
otog
raph
or
pic
ture
fra
mes
of
non
ferr
ous
met
als.
In
ac
cord
ance
w
ith
p
revi
ousl
y an
nou
nce
d co
ntr
ols,
A.
va
lidat
ed l
icen
se i
s n
ot p
rese
ntl
y re
quir
ed f
or
oth
er c
omm
odit
ies
incl
ude
d in
th
is e
ntr
y.•*
A v
alid
ated
lic
ense
is
no
lon
ger
requ
ired
fo
r ex
por
tati
on t
o
Cou
ntr
y G
rou
ps X
an
d Y
fo
r bo
oken
ds o
f A
ny
met
al o
ther
th
an
prec
iou
s.
.28
A v
alid
ated
lic
ense
is
no
lon
ger
requ
ired
fo
r ex
por
t* o
f co
pp
er
or
cop
per
allo
y w
eath
erst
rip
pin
g to
C
oun
try
Gro
up
Y,
or
to
Cou
ntr
y G
rou
ps
X a
nd
Y
fo
r th
e fo
llow
ing
cop
per
or
cop
per
al
loy
arti
cles
: an
imal
cag
es,
bir
d c
ages
, bo
oken
ds,
bott
le c
arri
ère,
bu
ll ri
ngs
, ca
n '
top
sp
outs
, ea
r m
uff
fr
ames
, an
d w
eath
er
stri
pp
ing.
In
acc
orda
nce
wit
h p
revi
ousl
y an
nou
nce
d co
ntr
ols,
a
valid
ated
lic
ense
is
not
req
uir
ed f
or
exp
ort
to t
hes
e de
stin
atio
ns
of
Oth
er a
rtic
les
in t
his
en
try.
80 A
val
idat
ed l
icen
se i
s n
o lo
nge
r re
quir
ed f
or
exp
ort
to C
oun
tr
y G
rou
p X
of
the
foll
owin
g co
pp
er o
r oo
pp
er a
lloy,
art
icle
s!
bead
ch
ain
s, b
ulle
tin
boa
rds,
ca
sket
s,
clot
hes
-lin
e* (
dry
er)
reel
s,
hin
ge c
hap
lets
, lid
s fo
r bo
xes,
too
l bo
xes
and
ch
ests
, A
nd
uti
lity
bo
xes.
In
acc
orda
nce
-w
ith
pre
viou
sly
ann
oun
ced
con
trol
s, a
val
ida
ted
licen
se i
s n
ot r
equ
ired
-for
exp
ort
to t
his
des
tin
atio
n f
or
oth
er a
rtic
les
in t
his
en
try.
27 T
hre
e en
trie
s ar
e su
bsti
tute
d fo
r ei
ght
entr
ies
pre
sen
tly
un
der
th
is e
xpor
t C
ontr
ol C
omm
odit
y N
um
ber
.38
Alu
min
um
sc
reen
cl
oth
is
in
clu
ded
un
der
Exp
ort
Con
trol
C
omm
odit
y N
o.'6
9222
.90
A v
alid
ated
lic
ense
Is
no
lon
ger
requ
ired
fo
r ex
por
t o
f th
e fo
llow
ing
non
ferr
ous
met
al a
rtic
les
(oth
er t
han
cop
per
or
cop
per
all
oy)
to C
oun
try
Gro
up
Y:
anim
al c
ages
, b
ird
cag
es,
book
- en
ds,
bot
tle
carr
iers
, bu
ll ri
ngs
, ca
n t
op s
pou
ts,
chan
ge c
arri
ers,
ea
r m
uff
fra
mes
, oi
ntm
ent
cans
, an
d w
eath
erst
rip
pin
g.40
A
val
idat
ed l
icen
se 'i
s n
o lo
nge
r re
quir
ed f
or
exp
ort
,ef
lead
o
r ti
n c
olla
psib
le t
ube
s to
Cou
ntr
y G
rou
p Y
.
41 A
val
idat
ed l
icen
se i
s n
o lo
nge
r re
quir
ed f
or
exp
ort
to C
oun
tr
y
Gro
up
X
of
non
ferr
ous
met
al
cask
ets
or
link
ch
ain
s.
In
acco
rdan
ce
wit
h
pre
viou
sly
ann
oun
ced
con
trol
s,
a
valid
ated
lic
ense
is
not
re
quir
ed
for
exp
ort
to t
his
des
tin
atio
n o
f ot
her
ar
ticl
es i
n t
his
en
try.
42 T
he
cove
rage
o
f th
is
entr
y is
am
ende
d to
* in
clu
de
carb
on
stee
l tu
bes
only
. E
ffec
tive
A
pri
l 8,
19
66,
a va
lidat
ed
licen
se
is r
equ
ired
fo
f ex
por
t o
f tu
bes
oth
er t
han
car
bon
ste
el t
o C
oun
tr
y
Gro
ups
X
an
d Y
or
to C
oun
try
Gro
ups
T,'
V,
W,
X,
and
Y,
depe
ndi
ng
on w
het
her
th
ey a
re s
peci
ally
des
ign
ed f
or
a b
oile
r w
hic
h
requ
ires
a
va
lidat
ed
licen
se
to
Cou
ntr
y G
rou
ps
T,
Y,
and
W.
42 T
his
en
try
is d
elet
ed.
Ru
bb
er b
atte
ry b
oxes
, ja
rs,
and
pa
rts
are
tran
sfer
red
fr
om
Exp
ort
Con
trol
C
omm
odit
y N
o.
6298
9 to
72
912
to c
onfo
rm w
ith
rev
isio
ns
ann
oun
ced
by t
he
Bu
reau
of
the
Cen
sus
In P
ub
lic B
ulle
tin
B-2
, da
ted
Jan
uar
y 1,
196
6.41
Var
ityp
ers®
an
d pa
rts,
fo
rmer
ly
in
Exp
ort
Con
trol
C
om
mod
ity
Nos
. 71
410
and
7149
2,
resp
ecti
vely
, ar
e n
ow
incl
ude
d u
nde
r E
xpor
t C
ontr
ol C
omm
odit
y N
o. 7
1822
.4B
Th
is e
ntr
y is
del
eted
fro
m t
he
Com
mod
ity
Con
trol
Lis
t u
nd
er
this
E
xpor
t C
ontr
ol
Com
mod
ity
Nu
mb
er,
in
acco
rdan
ce
wit
h
revi
sion
s an
nou
nce
d b
y th
e B
ure
au
of
the
Cen
sus
in
Pu
blic
B
ulle
tin
B-2
, ef
fect
ive
Jan
uar
y 1,
196
6.4n
A s
epar
ate
entr
y is
est
ablis
hed
to
con
form
to
revi
sion
s an
n
oun
ced
by
tlic
B
ure
au o
f th
e C
ensu
s in
P
ub
lic
Bu
lleti
n
B-2
, ef
fect
ive
Jan
uar
y 1,
196
6. *
47 T
hre
e en
trie
s ar
e su
bsti
tute
d fo
r an
en
try
pre
sen
tly
on t
he
Com
mod
ity
Con
trol
* L
ist
un
der
this
E
xpor
t C
ontr
ol C
omm
odit
y N
um
ber
.48
A v
alid
ated
lic
ense
is
no
lon
ger
requ
ired
fo
r ex
por
t to
Cou
n
try
G
rou
p X
o
f en
amel
ing
plat
es,
pap
erm
ill
win
ders
, an
d
stac
kers
. In
ac
cord
ance
wit
h
pre
viou
sly
ann
oun
ced
con
trol
s,
a
valid
ated
lic
ense
is
not
req
uir
ed f
or
exp
ort
to t
his
des
tin
atio
n o
f ot
her
art
icle
s in
th
is e
ntr
y.40
Att
ach
men
ts
for
inte
gral
tr
acto
r-sh
ovel
lo
ader
s ar
e 'tr
ans
ferr
ed f
rom
Exp
ort
Con
trol
Com
mod
ity
No.
719
31 t
o 71
842.
w T
wo
en
trie
s ar
e su
bsti
tute
d fo
r on
e en
try
pres
entl
y on
th
e C
omm
odit
y C
ontr
ol
Lis
t u
nde
r th
is E
xpor
t C
ontr
ol C
omm
odit
y N
um
ber
.’
81A
va
lidat
ed
licen
se
is
no
lon
ger
requ
ired
fo
r ex
por
t to
C
oun
try
Gro
up
Y o
f br
ead
cool
ers
and
oth
er b
aker
y m
ach
ines
in
volv
ing
a c
han
ge in
tem
pera
ture
..
Tw
o e
ntr
ies
are
subs
titu
ted
for
five
en
trie
s p
rese
ntl
y on
th
e C
omm
odit
y C
ontr
ol L
ist
un
der
this
Exp
ort
Con
trol
Com
mod
ity
Nu
mb
er.
M A
val
idat
ed l
icen
se i
s n
o lo
nge
r re
quir
ed f
or
exp
ort
to C
oun
tr
y
Gro
up
X
of
vege
tab
le o
il
mill
m
ach
ines
, pu
lp
and
pap
er
mil
l m
ach
ines
, an
d ru
bber
pro
cess
ing
mac
hin
es
for
proc
essi
ng
by
mea
ns
of
a ch
ange
in
tem
pera
ture
. In
acc
ord
ance
wit
h p
re
viou
sly
ann
oun
ced
con
trol
s,
a va
lidat
ed
licen
se
is
not
req
uir
ed
for
exp
ort
to
this
de
stin
atio
n
of
cool
ing
tow
ers,
co
olin
g p
ond
un
its,
an
d t
obac
co p
roce
ssin
g m
ach
ines
.M
Th
is
entr
y is
co
rrec
ted
to
refl
ect
a
revi
sion
an
nou
nce
d in
C
urr
ent
Exp
ort
Bu
lleti
n
912,
w
hic
h
rem
oved
th
e re
quir
emen
t fo
r a
val
idat
ed, l
icen
se f
or
exp
ort
of
thes
e co
mm
odit
ies
to C
oun
tr
y G
rou
p X
.06
A v
alid
ated
lic
ense
is
no
lon
ger
requ
ired
fo
r ex
por
t o
f w
ood
- h
eel
mac
hin
es a
nd
par
ts,
acce
ssor
ies
and
atta
chm
ents
.to
Cou
ntr
y G
rou
ps X
an
d Y
.m
A v
alid
ated
lic
ense
is
no
lon
ger
requ
ired
fo
r ex
por
t o
f th
ese
com
mod
itie
s to
Cou
ntr
y G
rou
p X
an
d a
sep
arat
e en
try
is e
stab
lis
hed
. <
07 A
val
idat
ed l
icen
se i
s n
o lo
nge
r re
quir
ed f
or
exp
ort
of
this
co
mm
odit
y to
Cou
ntr
y G
rou
ps X
an
d Y
.M
Th
e G
LV
do
llar-
valu
e li
mit
is
in
crea
sed
fo
r sh
ipm
ents
to
C
oun
try
Gro
up
V.
M T
hes
e co
nta
iner
s ar
e tr
ansf
erre
d f
rom
Exp
ort
Con
trol
Com
m
odit
y N
o.
7317
0 to
73
168
to
con
form
w
ith
Sch
edu
le
B
clas
si
fica
tion
.00
Air
cra
ft t
rain
ing
equ
ipm
ent
and
flig
ht
sim
ula
tors
an
d p
arts
th
eref
or
are
tran
sfer
red
fr
om
E
xpor
t C
ontr
ol
Com
mod
ity
No
. 86
194
to 8
9999
.01
Fou
r en
trie
s a
re s
ubs
titu
ted
for
thre
e en
trie
s p
rese
ntl
y on
th
e C
omm
odit
y .C
ontr
ol
Lis
t u
nde
r th
is
Exp
ort
Con
trol
C
om
mod
ity
Nu
mbe
r.02
Eff
ecti
ve
Ap
ril
8,
1966
, a
val
idat
ed
licen
se i
s re
quir
ed f
or
exp
ort
to
Cou
ntr
y G
rou
ps T
, V
, an
d W
of
hig
h s
peed
mot
ion
p
ictu
re .c
amer
as
(Ex
po
rt C
ontr
ol C
omm
odit
y N
o.
8615
0)
mee
tin
g th
e sp
ecifi
cati
ons
spec
ified
; an
d sp
ecia
lly d
esig
ned
par
ts a
nd
acce
ssor
ies
ther
efor
(E
xp
ort
C
ontr
ol
Com
mod
ity
Nos
. 86
112,
86
150
and
861
91).
'M
Eff
ecti
ve M
ay
16,
1966
, an
Im
por
t C
erti
fica
te
(or
a H
ong
Kon
g Im
por
t L
icen
se)
wil
l b
e re
quir
ed i
n s
up
por
t o
f a
lic
ense
ap
plic
atio
n
cove
rin
g ex
por
t o
f th
ese
cam
eras
, p
arts
, an
d
ac
cess
orie
s to
th
e co
un
trie
s sp
ecifi
ed i
n 8
873
.2.
# 84
For
mer
ly
incl
ude
d u
nd
er
Exp
ort
Con
trol
C
omm
odit
y N
o«
8619
9.
On
ly t
he
par
ts a
nd
acce
ssor
ies
rem
ain
un
der
that
'nu
mbe
r an
d ar
e in
du
ded
in
th
e la
st e
ntr
y u
nde
r N
o. 8
6199
.65
A
valid
ated
lic
ense
is
n
o lo
nge
r re
quir
ed
for
exp
ort
to
dest
inat
ion
s in
C
oun
try
Gro
up
Z
, ex
cep
t to
Cu
ba,
of
reco
rded
co
mm
erci
al
phon
ogra
ph
re
cord
s.
A v
alid
ated
lic
ense
con
tin
ues
to
be
requ
ired
fo
r ex
por
ts t
o C
uba
.88
A v
alid
ated
lic
ense
is
no
lon
ger
requ
ired
fo
r ex
por
t o
f th
is
com
mod
ity
to C
oun
try
Gro
up’
T.
87 T
he
GL
V
dolla
r-va
lue
lim
it
is
incr
ease
d fo
r sh
ipm
ents
o
f m
etal
-cu
ttin
g m
ach
ine
tool
s to
Cou
ntr
y G
rou
p V
.08
Th
ree
entr
ies
are
subs
titu
ted
for
five
en
trie
s p
rese
ntl
y on
th
e C
omm
odit
y C
ontr
ol L
ist
un
der
this
Exp
ort
Con
trol
Com
mod
ity
Nu
mb
er,
»E
xam
ples
of
spin
-for
min
g m
achi
nes
are!
A
ppel
, Fl
otu
rn,
Huf
Yord
, H
ydro
spin
, R
ollfo
rm,
Rol
l flo
w.
Sh
ear-
form
, S
pin
for
gin
g, a
nd
Slic
k m
ill t
ypes
. ,
,.
."T
his
en
try
is
dele
ted,
ina
smuc
h as
cu
ttin
g to
ols
shou
ld b
e re
port
ed
un
der
Exp
ort
Con
trol
C
omm
odit
y N
o. 6
9624
an
d ar
e in
c'u
ded
on t
he
Com
mod
ity
Con
trol
Lis
t u
nde
r th
at n
umbe
r.71
Cu
rren
t E
xpor
t B
ulle
tin
No.
91
9 an
nou
nced
th
e tr
ansf
er
of
licen
sin
g au
thor
ity
for
amm
uni
tion
man
ufa
ctu
rin
g m
achi
nes
from
th
e U
. S
. D
epar
tmen
t of
Com
mer
ce t
o th
e U
. S
. D
epar
tmen
t o
f S
tate
, ef
fect
ive
July
13
, 19
66.
Part
s fo
r th
ese
mac
hine
s w
ere
also
in
clud
ed
in
this
tr
ansf
er.
Th
eref
ore,
th
is
entr
y is
de
lete
d fr
om t
he C
omm
odit
y C
ontr
ol L
ist.
.
' 7*
Th
is e
ntr
y is
del
eted
, in
asm
uch
as t
hese
com
mod
itie
s sh
ould
be
rep
orte
d u
nde
r E
xpor
t C
ontr
ol C
omm
odit
y N
o. 7
1521
and
are
in
clud
ed o
n th
e C
omm
odit
y C
ontr
ol L
ist
in t
he
first
en
try
und
er
that
num
ber.
"Th
is e
ntr
y is
del
eted
, in
asm
uch
as t
hes
e co
mm
odit
ies
shou
ld
be r
epor
ted
un
der
Exp
ort
Con
trol
Com
mod
ity
No.
715
23 a
nd
are
incl
uded
on
th
e C
omm
odit
y C
ontr
ol L
ist
in t
he
seco
nd e
ntr
y u
nder
th
at n
um
ber.
74 T
hes
e el
ectr
onic
con
trol
sys
tem
s ar
e pr
esen
tly l
iste
d as
th
e fir
st
and
seco
nd e
ntri
es
und
er E
xpor
t C
ontr
ol C
omm
odit
y N
o.
7195
4, a
nd
are
now
tra
n&fe
rred
to
No.
729
62 w
ith
no
chan
ge i
n
cont
rols
.78
A v
alid
ated
lic
ense
may
als
o be
req
uire
d fo
r ot
her
des
tina
ti
ons
if t
his
com
mod
ity
con
tain
s te
chn
ical
dat
a.
See
Par
t 38
5.w
Effe
ctiv
e A
pri
l 8,
19
68.
a va
lidat
ed l
icen
se i
s re
quir
ed
for
exp
ort
of
th|s
com
mod
ity
to C
oun
try
Gro
ups
T a
nd
V,
and
a se
para
te e
ntr
y is
est
ablis
hed.
77 E
ffect
ive
Ap
ril
8,
1966
, a
valid
ated
lic
ense
Is
requ
ired
fo
r ex
por
t of
the
se t
ubes
, pi
pes
and
blan
ks t
o C
oun
try
Gro
ups
T a
nd
V,
and
to C
oun
try
Gro
ups
T,
V,
W a
nd
X f
or
exp
ort
of
thes
e p
ipe
fitti
ngs
."E
ffec
tive
Ap
ril
8,
1966
, a
valid
ated
lic
ense
is
requ
ired
for
ex
por
t o
f co
pper
and
cop
per
allo
y w
eldi
ng
elec
trod
es t
o C
oun
try
Gro
ups
T,
V,
W,
X a
nd
Y,
and
to C
oun
try
Gro
ups
T.
V a
nd
W
for
exp
ort
of
copp
er a
nd
copp
er a
lloy
wel
din
g an
d so
lder
ing
rods
an
d w
ire,
in
clud
ing
tube
s an
d pl
ates
fo
r w
eld
ing
and
sold
erin
g«
Dep
artm
ent
of C
omm
erce
E
xpor
t C
ontr
ol C
omm
odit
y N
um
ber
Com
mod
ity
Des
crip
tion
Un
it
Proc
essi
ng
Cod
e an
d R
elat
ed
Com
mod
ity
Gro
up N
o*
Val
idat
ed
Lice
nse
R
equ
ired
for
Cou
ntry
Gro
ups
Sh
own
Bel
ow
GL
V 8
Val
ue
Lim
ita
for
Sh
ipm
ent t
o C
oun
try
Gro
upa
Spe
cial
’rev
isio
n«
List
TV
.
X
TEX
TIL
E F
IBE
RS,
NO
T M
AN
UFA
CTU
RE
D IN
TO
YAR
N, T
HR
EA
D, O
R F
ABR
ICS,
AN
D T
HE
IR W
AS
TE
264
Jute
, inc
ludi
ng ju
te c
uttin
gs a
nd w
aste
.’- *
..Lb
.T
EX
T 8
YZ
B26
500
Veg
etab
le fi
bers
and
was
te o
f sis
al, h
eneq
uen,
Lb.
TE
XT
8Y
Z—
*——
Bm
anila
or
abac
a.’>
*26
500
Oth
er v
eget
able
fibe
rs a
nd w
aste
, exc
ept
cot-
Lb.
TE
XT
8Z
- —
¿tmB
ton
and
jute
.1- *
•26
700
Use
d ci
vilia
n cl
othi
ng,
othe
r us
ed
text
ileLb
.T
EX
T 8
Z'
_B
artic
les,
n.e
.c.,
and
new
or
used
rag
s, w
holly
or
in
chie
f w
eigh
t o
f m
an-m
ade
fiber
s, s
ilk, o
r ve
geta
ble
fiber
s, e
xoep
t ju
te;
and
used
foo
twea
r of
all
ma
teri
als.
(2
and
8)*-
*>”*
2670
0 O
ther
use
d ci
vilia
n cl
othi
ng, u
sed
text
ile a
rt!-
Lb.
TE
XT
8Y
ZB
des,
n.e
.c.,
and
new
or
used
rag
s. (
2 an
d 3)
*. *.
-x
CR
UD
E F
ER
TILI
ZER
S A
ND
CR
UD
E
MIN
ER
ALS,
EX
CLU
DIN
G C
OAL
, PE
TRO
LEU
M,
AN
D P
RE
CIO
US
STO
NE
S
2714
0 Po
tass
ium
chl
orid
e.
(1)*
......
....
......
......
...S.
ton
AG
SU
8X
YZ
100
B27
3 St
one,
sl
ate,
gy
psum
, sa
nd,.
and
grav
el.
a)*
.»27
511
Cru
shin
g bo
rt, e
xcep
t du
st a
nd p
owde
r.”.
"..
Car
at
MIN
L 8
FIN
P 8
Z
WX
YZ
100
B B27
515
Dia
mon
ds, i
ndus
tria
l. [R
epor
t sy
nthe
tic d
ia-
Car
atF
INP
8W
XY
Z• r
r10
0B
mon
ds in
Exp
ort
Con
trol
Com
mod
ity N
o. 6
6700
.]”. "
27
624
Oth
er m
agne
site
, n.
e.c.
, in
clud
ing
crud
e an
dLb
.M
INL
8Z
——
—B
: ;
caus
tic c
alci
ned,
lum
p or
gro
und,
(2
and
3)”
ME
TALL
IFE
RO
US
OR
ES
AN
D M
ETA
L SC
RA
P
2833
0 B
auxi
te a
nd c
once
ntra
tes
of a
lum
inum
, ex
-L.
ton
NO
NF
8Z
Bel
udin
g al
umin
a.
[Rep
ort
alum
ina
in E
xpor
t C
on
trol
Com
mod
ity N
o. 5
1865
.] (1
and
2)”
2839
3 M
olyb
denu
m o
res
and
conc
entr
ates
. (2
)”..
.Ç
nt.lb
.M
INL
4T
VW
XY
Z1
,00
01
,00
0E
-7
FEDE
RAL
REGI
STER
, VO
L. 31
, NO
. 93
—FR
IDAY
, M
AY 1
3, 1
966
RULES AND REGULATIONS 7041
, D
epar
tmen
t o
f C
omm
erce
E
xpor
t C
ontr
ol C
omm
odit
y N
um
ber
and
Com
mod
ity
Des
crip
tion
FA
TT
Y A
CID
S, W
AX
ES
, A
ND
SPE
CIA
LLY
TRE
ATE
D F
ATS
AN
D O
ILS
, E
XC
LUD
ING
PE
TRO
LEU
M P
RO
DU
CTS
4313
0 F
atty
ac
ida
and
refin
ing:
by
-pro
duct
s of
ve
geta
ble
Ori
gin,
inc
ludi
ng i
ndus
tria
l m
ixtu
res.
*
AN
IMA
L A
ND
VE
GE
TAB
LE O
ILS
AN
D F
ATS,
N
.E.C
., FO
R R
ELI
EF
OR
CH
AR
ITY
4315
0 A
nim
al a
nd v
eget
able
oils
and
fat
s, n
.e.c
., do
nate
d fo
r re
lief o
r ch
arit
y by
indi
vidu
als
or p
ri-
vate
age
ncie
s. (
1)*>
8
Lb.
Lb.
CH
EM
ICA
L E
LEM
EN
TS A
ND
CO
MPO
UN
DS
*
.512
06
Oth
er p
estic
ides
and
syn
thet
ic a
gric
ultu
ral
chem
ical
s, e
xcep
t fo
rmul
atio
ns o
r pr
epar
atio
ns o
r pe
stic
idal
che
mic
als
put
up f
or r
etai
l sal
e. (
2 a
nd
3)i
.io
Lb.
AG
SU
8YS
5—
■ --
—B
■513
10
Indu
stri
al g
ases
, in
clud
ing
rare
gas
es,
ex
cept
hel
ium
, an
d m
ixtu
res
ther
eof.
[Rep
ort
net
quan
tity
in c
ubic
fee
t of
equ
ival
ent
gas.
] (1
) *
M c
u.
ft.
SA
LT
8X
YZ
——
100
B
5132
5 Q
uick
silv
er o
r m
ercu
ry.*
•ll.
......
......
....
Lb.
MIN
L 2
TV
WX
YZ
500
100
_E
-751
366
Alum
inum
oxi
de c
atal
ysts
use
able
in
petr
ole
um a
nd c
hem
ical
pro
cess
ing
oper
atio
ns.1*
Lb.
SA
LT
8W
XY
Z•
—•
—10
0B
5136
6 A
loxi
te®
scr
ap. *
■ 8
......
......
......
......
......
....
Lb.
MIN
L 8
Z_
B51
366
Oth
er a
rtifi
cial
cor
undu
m (
fuse
d al
bmin
um
oxid
e).
(1).
*Lb
.M
INL
8X
YZ
——
100
B
5136
9 O
ther
gal
lium
oxi
des,
hyd
roxi
des
and
per
oxid
es.
(4) i
*. i*
Lb.
SA
LT
2T
VW
XY
Z50
025
—E-
13
5136
9 G
erm
aniu
m
oxid
es,
hydr
oxid
es
and
per
oxid
es,
99.9
9 pe
rcen
t or
bet
ter
puri
ty.
(6)
14Lb
.S
AL
T 2
TV
WX
YZ
500'
500
—E
-13
5147
0 M
onoc
ryst
allin
e ga
lliu
m
com
poun
ds,
n.e.
c.
(Spe
cify
by
chem
ical
nam
e.)
11Lb
.S
AL
T 1
TV
WX
YZ
500
——
A E
-13
5147
0 O
ther
gal
lium
com
poun
ds, n
.e.c
. (S
peci
fy b
y ch
emic
al n
ame.
) [R
epor
t ox
ides
, hy
drox
ides
and
pe
roxi
des
in
Exp
ort
Con
trol
C
omm
odity
N
o.
5136
9] »
Lb.
SA
LT 2
TV
WX
YZ
500
E-1
3
5147
0 G
erm
aniu
m c
ompo
unds
, 99.
99 p
erce
nt o
r be
tte
r pu
rity
n.e
.c.
[Rep
ort ,
oxid
es,
hydr
oxid
es a
nd
pero
xide
s in
E
xpor
t C
ontr
ol
Com
mod
ity
No.
51
369]
(23
) '
Lb.
SA
LT 2
TV
WX
YZ
500
E-1
3
5150
0 Li
thiu
m 6
and
7,
and
thei
r co
mpo
unds
.*..
..S
AL
T 1
TV
WX
YZ
500
25—
A E
-13
5150
0 O
ther
sta
ble
isot
opes
; an
d co
mpo
unds
and
m
ixtu
res
of r
are
eart
h m
etal
s, n
.e.c
. (3
) *
SA
LT
8X
YZ
100
B
^Pro
cess
ine
Cod
e an
d R
elat
ed
Com
mod
ity*
G
rou
p N
o.
AG
RI
8
Val
idat
ed
. Lic
ense
R
equ
ired
for
Cou
ntr
y G
roup
s S
how
n B
elow YZ
GL
V $
Val
ue
Lim
its
for
Sh
ipm
ent t
o C
oun
try
Gro
ups
Sp
edai
Prov
isio
ns
Lis
t
Exp
ort
cont
rols
app
licab
le t
o ea
ch c
omm
odity
und
er
this
cla
ssifi
catio
n ar
e th
ose
whi
ch a
pply
to
the
com
m
odit
y w
hen
expo
rted
com
mer
cial
ly u
nder
its
ind
ivi
dual
Exp
ort
Con
trol
Com
mod
ity N
umbe
r.
FEDE
RAL
RE
GIS
TER
, VO
L. 3
1,
Dep
artm
ent
of
Com
mer
ce'
Exp
ort
Con
trol
Com
mod
ity
Nu
mbe
r f
and
Com
mod
ity
Des
crip
tion
Un
it
Proc
essi
ng
Cod
e an
d R
elat
ed
Com
mod
ity
Gro
up
No.
Val
idat
ed
Lice
nse
Req
uire
d fo
r C
oun
try
Gro
ups
Show
n B
elow
GL
V $
Val
ue
Lim
its
for
Sh
ipm
ent t
o C
oun
try
Gro
ups
Spec
ial
Prov
isio
ns
Lis
tT
VX
DYE
ING
, TA
NN
ING
, A
ND
C
OLO
RIN
G M
ATE
RIA
LS,
NA
TUR
AL
AN
D S
YNTH
ETI
C
5333
2 Fi
nish
es,
enam
els
and
disp
ersi
ons
-par
ti
ally
mad
e of
pol
yetr
aflu
oroe
thyl
ene
or p
olyt
ri-
fluor
ochl
oroe
thyl
ene.
(S
peci
fy b
y na
me
(3)*
Gal
.R
ES
N 4
TV
WX
YZ
500
©o40
—E
-S
5333
5 Pa
stes
who
lly m
ade
of fl
uoro
carb
on p
olym
ers
or c
opol
ymer
s.
(Spe
cify
by
nam
e.)
(See
§39
9.2,
In
terp
reta
tion
22.
) *
ME
DIC
INA
L A
ND
PH
AR
MA
CE
UTI
CA
L PR
OD
UC
TS
Lb.
RE
SN
1T
VW
XY
Z50
025
ae
-b
5418
0 M
edic
inal
and
pha
rmac
eutic
al p
rodu
cts
do-
Exp
ort
cont
rols
app
licai
ile t
oäa
eh c
c >m
mod
ity
und
erna
ted
for
relie
f or
cha
rity
by
indi
vidu
als
or p
ri-
this
cla
ssifi
catio
n ar
e th
ose
whi
ch a
pply
to
the
com
-va
te a
genc
ies.
8-15
mod
ity w
hen
expo
rted
com
mer
cial
ly u
nder
its
ind
ivi
dual
Exp
ort
Con
trol
Com
mod
ity N
umbe
r.54
191
Ban
dage
s an
d su
rgic
al
dres
sing
s,
not
im
preg
nate
d or
coa
ted
with
pha
rmac
eutic
al p
rodu
cts,
pu
t up
for
reta
il sa
le (
1)-
DR
UG
8Y
ZB
r
5419
1 B
anda
ges
and
surg
ical
dr
essi
ngs,
im
preg
na
ted
or
coat
ed
with
ph
arm
aceu
tical
pr
oduc
ts,
whe
ther
or
not,
put
up f
or r
etai
l sa
le.
(2) -
EX
PLO
SIV
ES
AN
D P
YRO
TEC
HN
IC P
RO
DU
CTS
DR
UG
8Z
B
5711
2 O
ther
exp
losi
ves
and
blas
ting
agen
ts.
(4)-
..
PLA
STI
C M
ATE
RIA
LS,
RE
GE
NE
RAT
ED
C
ELL
ULO
SE,
AN
D A
RTI
FIC
IAL
RE
SIN
S
Lb.
SA
LT 8
XY
Z10
0B
5811
0 O
ther
ion
exc
hang
e re
sins
. [R
epor
t st
yren
e io
n ex
chan
ge r
esin
s an
d ot
her
poly
mer
izat
ion
and
copo
lym
eriz
atio
n pr
oduc
ts in
Exp
ort
Con
trol
Com
m
odity
No.
581
20.]
(4 a
nd 8
)7 •
Lb.
RE
SN
8W
XY
Zw—
100
B
5812
0 Pl
asti
c pr
oduc
ts,
unfin
ishe
d or
sem
ifini
shed
, w
holly
mad
e of
flu
oroc
arbo
n po
lym
ers
or c
opol
ym
ers,
incl
udin
g:,p
aste
s, l
amin
ates
, et
c. (
Spe
cify
by
nam
e.)
(3,9
and
14)
7
Lb.
RE
SN
3TV
WX
.YZ
500
500
A E
-3
5812
0 La
min
ates
pa
rtia
lly
mad
e of
flu
oroc
arbo
n po
lym
ers
or c
opol
ymer
s, i
nclu
ding
: mol
ded,
dec
ora
tive
, or
lam
inat
ed w
ith o
ther
mat
eria
ls o
r m
etal
s.
(Spe
cify
by
nam
e.)
(10
and
11)7
Lb.
RE
SN
2T
VW
XY
Z50
050
0E
-S
5812
0 Po
lypy
rom
ellit
imid
e, a
nd p
olyb
enzi
mid
azol
e,
unfin
ishe
d or
sem
ifini
shed
, in
clud
ing
lam
inat
es.
(5
and
8)7
Lb.
RE
SN
3T
VW
XY
Z50
025
gA
E-3
5813
2 O
ther
re
gene
rate
d ce
llulo
se
and
chem
ical
de
riva
tive
s of
cel
lulo
se.
(2 a
nd 5
)7Lb
.R
ES
N 8
XY
Z—
*-■
100
B
5819
9 M
ater
ials
de
sign
ed
and
man
ufac
ture
d f
or
use
as a
bsor
bers
of
elec
trom
agne
tic w
aves
hav
ing
freq
uenc
ies
grea
ter
than
200
meg
acyc
les
per
sec
ond.
(I)
13
Lb.
ELM
E 1
TV
WX
YZ
500
500
A
I. 93
—FR
IDAY
, M
AY 1
3, 1
966
SNouvmoaa qnv sains zfoi
Dep
artm
ent
of C
omm
erce
E
xpor
t C
ontr
ol C
omm
odit
y N
um
ber
Un
it
Proc
essi
ng:
Cod
e an
d R
elat
ed
Com
mod
ity
Gro
up
No.
Val
idat
ed
Lice
nse
R
equ
ired
fo
r C
oun
try
Gro
ups
Show
n B
elow
GL
V $
Val
ue
Lim
its
for
Sh
ipm
ent t
o C
oun
try
Gro
upa
Spe
cial
Prov
isio
nsC
omm
odit
y D
escr
ipti
onT
V
1X
CH
EM
ICA
L M
ATE
RIA
LS A
ND
PR
OD
UC
TS,
N.E
.C.
5995
8 C
asei
n hy
drol
ysat
e; c
asei
n la
ctal
bum
in;
lac-
Lb.
AG
RI
8Y
ZB
talb
umin
; la
ctal
bum
in
hydr
olys
ate;
la
ctor
ene
(cas
ein
); an
d in
edib
le s
oybe
an p
rote
in.
(2)*
59
958
Oth
er a
lbum
ins,
cas
eins
, glu
es .a
nd a
dhes
ives
Lb.
AG
RI
8Z
Bo
f fis
h, a
nim
al o
r ve
geta
ble
orig
in,
and
albu
min
oi-
dal
subs
tanc
es,
incl
udin
g ed
ible
an
d in
edib
le
gela
tins.
(3
)359
958
Oth
er g
lues
and
adh
esiv
es n
ot o
f fis
h, a
nim
alLb
.S
AL
T 8
XY
Z10
0B
or v
eget
able
ori
gin
; pe
pton
es;
and
dext
rins
(f
or
exam
ple,
Bri
tish
gu
m).
(1 a
nd 6
)*59
965
Woo
d ta
r; w
ood
tar
oils
; an
d w
ood
creo
sote
.Lb
.O
RG
N 8
YZ
B(1
and
2)1
,159
971
Min
eral
wax
es,
mod
ified
; ve
geta
ble
wax
es,
Lb.
OR
GN
8Z
Bm
odifi
ed;
and
lipst
ick
wax
es.
(2,
3 an
d 4
)1«
5997
3 O
ther
ani
mal
bla
ck, e
xcep
t ac
tivat
ed.
(2)2
..Lb
.A
GR
I 8
XY
Z10
0B
5997
5 An
ti-kn
ock
com
poun
ds;
and
addi
tives
fo
r lu
bric
atin
g oi
ls.
(Spe
cify
by
nam
e.)
(1 a
nd 3
)T
5999
1 D
enta
l im
pres
sion
com
poun
ds a
nd m
odel
ling
Lb.
PE
TR
8
MIN
L 8
WX
YZ Z
100
B Bpa
stes
in
plat
es,
stic
ks, a
nd s
imila
r fo
rms.
(1
and
2)i
«59
992
Oth
er
activ
ated
nat
ural
m
iner
al p
rodu
cts.
Lb.
MIN
L 8
ZB
(3 a
nd 4
),#59
999
Nic
kel
com
poun
d ca
taly
sts,
and
oth
er c
at-
Lb.
SA
LT
8W
XY
Z10
0B
alys
ts u
seab
le i
n pe
trol
eum
and
che
mic
al p
roce
ss
ing
oper
atio
ns.
(2,3
and
4) *
«59
999
Den
tal
plas
ters
and
pre
para
tions
.1'1.
......
.....
SA
TE
8Z
B59
999
Oth
er c
hem
ical
pro
duct
s or
pre
para
tions
, ex-
OR
GN
8X
YZ
__
100
Bce
pt a
lkyl
benz
ene,
dod
ecyl
benz
ene,
and
oth
er d
ete
rgen
t al
kyla
tes,
n.e
.c.
(14
and
15)T
RU
BB
ER
MA
NU
FAC
TUR
ES,
N.E
.C
6210
1 R
ubbe
r sh
eet p
acki
ng a
nd o
ther
unv
ulca
nize
dLb
.R
UB
R 1
TV
WX
YZ
500
100
Aru
bber
pla
tes,
she
ets,
and
str
ips
wh
olly
mad
e of
flu
oroc
arbo
n po
lym
ers
or
copo
lym
ers,
in
clud
ing
thos
e on
ly s
urfa
ce-w
orke
d an
d/or
cut
int
o re
ctan
gu
lar
shap
es.
(Spe
cify
by
nam
e an
d ty
pe)
(1
, 2
and
3) -
6210
1 M
aste
rbat
ches
, ci
s-ru
bber
typ
es,
in
plat
es,
Lb.
RU
BR
8W
XY
Z10
0B
shee
ts,
or
stri
ps,
incl
udin
g th
ose
only
sur
face
- w
orke
d an
d/or
cut
into
rec
tang
ular
sha
pes.
(4
)2
6210
1 O
ther
unv
ulca
nize
d ru
bber
pla
tes,
she
ets,
or
Lb.
RU
BR
8X
YZ
100
Bst
rips
, inc
ludi
ng t
hose
on
ly s
urfa
ce-w
orke
d an
d/or
cu
t in
to r
ecta
ngul
ar s
hape
s. (
5)2
62
102
Unv
ulca
nize
d ru
bber
, n.
e.c.
wh
olly
mad
e of
Lb.
RU
BR
1T
VW
XY
Z50
010
0A
fluor
ocar
bon
poly
mer
s or
cop
olym
ers.
(S
peci
fy b
y na
me.
) (I
)262
102
Mas
terb
atch
es,
cis-
rubb
er t
ypes
, n.
e.c.
1®..
..Lb
.R
UB
R 8
WX
YZ
--
100
B
FEDE
RAL
REGI
STER
, VO
L 31
,
Dep
artm
ent
of C
omm
craf
E
xpor
t C
ontr
ol C
omm
odit
y N
um
ber
an
dU
nit
Proc
essi
ng1
Cod
e an
d R
elat
ed
Com
mod
ity
Gro
up
No.
Val
idat
ed
Lice
nse
R
equ
ired
fo
r C
ount
ry G
roup
s Sh
own
Bel
ow
GL
V I
Val
ue
Lim
ite
for
Sh
ipm
ent t
o C
oun
try
Gro
ups
Spec
ialPr
ovisi
ons
List
Com
mod
ity
Des
crip
tion
1V
1
X
6210
2 O
ther
rub
ber
cem
ents
; an
d sp
onge
rub
ber,
ch
emic
ally
blo
wn
and
foam
. (2
)*Lb
.R
UB
R 8
YZ—
—-
B
6210
2 O
ther
un
vulc
aniz
ed
natu
ral
or s
ynth
etic
ru
bber
, n.e
.c.
(3)2
Lb.
RU
BR
8X
YZ
100
B
6293
0 A
tom
izer
bul
bs; b
ath
spra
ys; i
ce b
ags;
med
ici
ne d
ropp
ers
(gla
ss d
ropp
ers
wit
h ru
bber
sac
s);
nipp
le s
hiel
ds,
nurs
ers;
nur
sing
bot
tle n
ippl
es a
nd
teat
s; p
acifi
ers;
rub
ber s
acs
for
med
icin
e dr
oppe
rs;
spon
ge b
ags;
tee
thin
g ri
ngs
; an
d w
ater
bot
tles.
(1
),J
RU
BR
8Z
B
6298
8 M
ater
ials
des
igne
d an
d m
anuf
actu
red
for
use
as a
bsor
bers
of
elec
trom
agne
tic w
aves
hav
ing
freq
uenc
ies
grea
ter
than
200
meg
acyc
les
j>er
sec
on
d. (
5)J
S
Lb.
ELM
E 1
TV
WX
YZ
500
5«L
A,
6298
8 O
ther
spo
nge
rubb
er, a
nd fo
am r
ubbe
r go
ods,
an
d un
hard
ened
vul
cani
zed
rubb
er a
rtic
le;,
n.e.
c.
■ (4
and
7)*
LI).
RU
BR
8YZ
100
B
6298
9 E
lect
rica
l bat
tery
box
es a
nd ja
rs,
and
part
s.
(Spe
cify
by
nam
e.)
(I)1
*
WO
OD
AN
D C
OR
K M
AN
UFA
CTU
RE
S.
EX
CLU
DIN
G F
UR
NIT
UR
E
Lb.
RU
BR
8XY
ZB
6328
9 B
ee h
ives
; an
d ho
g tr
ough
s. (
2)"
*,...
......
..
PAPE
R,
PAPE
RB
OA
RD
,A
ND
MA
NU
FAC
TUR
ES
THE
RE
OF
AG
RI
8Y
ZB
6412
2 O
ther
fin
e pa
per,
gr
ound
woo
d pa
per,
and
bo
ok p
aper
, coa
ted,
in r
olls
or
shee
ts, f
or p
rint
ihg,
w
riti
ng,
dra
win
g, o
r ph
otog
raph
ic b
ase.
(2
)T
Lb.
TE
XT
8Z
_mmm
B
6413
0 K
raft
pap
er,
in r
olls
or
shee
ts, u
ncoa
ted,
as
follo
ws:
ab
rasi
ve b
ase
stoc
k; a
cidp
roof
; am
mun
iti
on;
antia
cid
man
ila;
base
wad
sto
ck;
buffi
ng;
cabl
e ba
se s
tock
; ca
ble
fillin
g, e
lect
rica
l; ca
rtri
dge
stoc
k;
coil
win
din
g;
cond
ense
r ti
ssue
; di
elec
tric
pa
pers
; do
cum
ent
man
ila,
file
fold
er;
dyna
mite
; el
ectr
ical
ins
ulat
ing;
em
ery,
bas
e st
ock;
exp
andi
ng
enve
lope
sto
ck;
flat
wal
let
stoc
k;
flin
t ba
ckin
g;
fris
ket;
gar
net
; ga
sket
; gra
phit
e; g
uide
sto
ck;
in
sula
ting,
el
ectr
ical
; pa
tch
base
st
ock;
pa
tter
n st
ock;
po
lishi
ng;
red
foili
ng
(car
trid
ge p
aper
);
red
patc
h ba
se s
tock
; sa
ndpa
per
back
ing;
sh
ell
stoc
k; s
ilk w
rap
stoc
k; t
issu
e; t
ympa
n; v
oice
coi
l st
ock;
wal
let
stoc
k; w
ashe
r st
ock.
(1
):‘
Lb.
.
TE
XT
8X
YZ
100
B
6413
0 O
ther
kra
ft p
aper
and
pap
erbo
ard,
in
rolls
or
she
ets,
unc
oate
d, n
.e.c
. (2
):‘Lb
.T
EX
T 8
z1
. ,
——
B
6414
0 C
igar
ette
pap
er in
bul
k, r
olls
, or
shee
ts.
[Re
port
cig
aret
te p
aper
cut
to
size
in
Exp
ort
Con
trol
C
omm
odity
No.
642
91.]
(1)*
Lb.
TE
XT
8z
B
». 93
—FR
IDAY
, M
AY 1
3, 1
966
RULES AND REGULATIONS 7043
- D
epar
tmen
t o
f C
omm
erce
E
xpor
t C
ontr
ol C
omm
odit
y N
um
ber
Un
it
Pra
eesi
lnf
Cod
e an
d R
elat
ed
Com
mod
ity
Gro
up
No»
Val
idat
ed
Lice
nse
R
equ
ired
for
Cou
ntr
y G
roup
s Sh
own
Bel
ow
GL
V %
Val
ue
Lim
ite
for
Sh
ipm
ent t
o C
oun
try
Gro
upa
Spee
lat
Prov
isio
nsL
ist
Com
mod
ity
Dcx
crip
tio*
T
1’
1X
6429
8 Pr
essu
re s
ensi
tive
synt
hetic
tap
e (in
clud
ing:
m
etal
lized
) su
itabl
e fo
r di
elec
tric
use
(co
nden
ser
tiss
ue)
, 0.
0015
inc
h (0
.038
mm
.) or
les
s in
thi
ck
ness
, ex
clud
ing
(a)
tens
ilize
d po
lyes
ter
film
with
th
ickn
ess
grea
ter
than
0.0
01 i
nch
(0.
0851
mm
.);
and
(6)
unte
nsili
zed
poly
este
r fil
m w
ith t
hick
ness
of
0.0
007
inch
(0
.018
mm
.) up
to
and
incl
udin
g 0.
001
inch
(0.0
851
mm
.). (
3)»
»
Lb.
RE
SN
3T
VW
XY
Z60
050
0A
E-S
6429
8 Pr
essu
re
sens
itive
po
lyes
ter
tape
su
itabl
e fo
r di
elec
tric
use
(c
onde
nser
tis
sue)
as
fol
low
s:
(a)
tens
ilize
d fil
m w
ith
thi
ckne
ss
grea
ter
than
0.
001
inch
(0
.02f
t m
m.)
up
to
and
incl
udin
g 0.
0015
inc
h (0
.038
mm
.) an
d (b
) un
tens
ilize
d fil
m
wit
h t
hick
ness
gre
ater
th
an
0.00
07
inch
(0
.018
m
m.)
up t
o an
d in
clud
ing
0.00
15 in
ch (
0.03
8 m
m.).
(4
)'»
Lb.
RE
SN
4T
VW
XY
Z50
050
0E
-3
6429
8 C
ello
phan
e ta
pe,
gum
med
. (6
)'®...
.......
TE
XT
ILE
YA
RN
FA
BR
ICS
, M
AD
E-U
P A
RTI
CLE
S A
ND
RE
LATE
D P
RO
DU
CTS
Lb.
TE
XT
8Y
ZB
6521
8 B
road
wov
en f
abri
cs,
unbl
each
ed,
wh
olly
or
in c
hie
f wei
ght
cott
on, n
.e.c
. (1
and
2)2
Lb.
TE
XT
8Y
Z—
——
B
6523
0 O
ther
bro
ad w
oven
rem
nant
s le
ss t
han
10
yard
s in
len
gth,
and
fab
rics
, n.
e.c.
, w
holly
or
in
chie
f wei
ght c
otto
n. (
2) 2
Lb.
TE
XT
8Y
ZB
6558
4 Te
xtile
fab
rics
and
art
icle
s co
ated
, co
vere
d or
lam
inat
ed w
ith
rub
ber,
for
use
in m
achi
nery
or
plan
t. (
3 an
d 4)
20
Lb.
TE
XT
8X
YZ
100
B
6566
2 E
lect
ric
blan
kets
, w
hol
ly o
r in
ch
ief
wei
ght
cott
on.
(I)2
1Lb
.T
EX
T 8
ZB
6566
3 B
lank
ets
wh
olly
or
chie
f w
eigh
t w
ool,
ex
cept
ele
ctri
c. (
2)7
Lb.
TE
XT
8Y
Z—
—B
6569
2 N
arro
w
wov
en
fabr
ics
coat
ed
or
impr
eg
nate
d w
ith
flu
oroc
arbo
n po
lym
ers
or
copo
ly
mer
s.®»
22
Lb.
RE
SN
4T
VW
XY
Z50
050
0E
-3
6569
2 A
utom
obile
sea
t co
vers
and
sea
t be
lts;
and
be
lts
for
occu
patio
nal
use.
(3,
4 a
nd 5
)s> 2
2Lb
.T
EX
T 8
XY
Z—
100
B
6569
2 O
ther
bel
ts, c
orse
t la
ces
and
shoe
lac
es w
ith
fitte
d en
ds,
rubb
eriz
ed
seat
clo
th
cove
ring
, an
d gu
mm
ed c
loth
glid
es o
r re
info
rcem
ents
, al
l te
xtile
m
ater
ials
; an
d ot
her
mad
e-up
art
icle
s w
hol
ly o
r in
ch
ief
wei
ght
silk
, m
an-m
ade
fiber
s or
veg
etab
le
fiber
s, e
xcep
t co
tton
or
jute
, an
d ex
cept
coa
ted
or
impr
egna
ted
narr
ow fa
bric
s. (
3, 4
and
5)a
<2<
Lb.
TE
XT
8Z
B
6569
2 O
ther
mad
e-up
tex
tile
art
icle
s, n
.e.c
. (3
, 4
and
5).
2»22
Lb.
TE
XT
8Y
ZB
FEDE
RAL
REGI
STER
, VO
L 31
Val
idat
edLi
cen
seD
epar
tmen
t o
f C
omm
erce
a
Proc
essi
ng
kkl
Spe
cial
Exp
ort
Con
trol
Com
mod
ity
Nu
mbe
rU
nit
Rel
ated
C
omm
odit
y G
roup
No.
Req
uir
ed fo
r?. r
evis
ion
a L
ist
Com
mod
ity
Des
crip
tion
Sh
own
Bel
owT
VX
NO
NM
ETA
LUC
MIN
ER
AL
MA
NU
FAC
TUR
ES,
N.E
.C.
6670
0 Q
uart
z cr
ysta
ls,
natu
ral
and
synt
hetic
, un
-Lb
.R
AR
A 1
TV
WX
YZ
500
50—
Aw
orke
d or
wor
ked,
not
mou
nted
, rad
io g
prad
e .o
nly.
<to
*66
700
Synt
hetic
dia
mon
ds
(incl
udin
g b
ort)
, su
it-F
INP
8W
XY
Z10
0B
able
onl
y fo
r in
dust
rial
use
.'-2
IRO
N A
ND
STE
EL
6721
0 Pu
ddle
d ba
rsan
d pi
lings
, blo
cks,
lum
ps,
and
Lb.
ST
EE
8W
XY
Z—
—10
0B
othe
r pr
imar
y fo
rms
of ir
on o
r st
eel,
n.e.
c. (
1)2
>22
6724
3 B
loom
s, b
illet
s, i
ngot
s, s
labs
, sh
eet
bars
and
Lb.
ST
EE
3T
VW
XY
Z50
010
0—
AM
rou
ghly
for
ged
piec
es,
allo
y st
eel,
spec
ial
type
s C
lass
1.
(I)2
250
010
0E
-767
243
Oth
er b
loom
s,
bille
ts,
ingo
ts,
slab
s,
shee
tLb
.S
TE
E 4
TV
WX
YZ
bars
, and
rou
ghly
forg
ed p
iece
s, a
lloy
stee
l, as
fol
lo
ws:
(a
) co
ntai
ning
6 p
erce
nt o
r m
ore
coba
lt, (
b)
AIS
I ty
pe 8
09-S
-Cb-
Ta,
or (
c) c
onta
inin
g a
tota
l of
35
perc
ent
or m
ore
of a
lloyi
ng e
lem
ents
. (2
)T>2
2S
TE
E 8
WX
YZ
100
B67
243
Oth
er a
lloy
stee
l (in
clu
ding
sta
inle
ss)
bil-
Lb.
' —
—le
ts,
proj
ecti
le a
nd s
hell
stee
l. (3
)r>2
2 67
243
Oth
er b
loom
s,
bille
ts,
ingo
ts,
slab
s,
shee
tLb
.S
TE
E 8
WX
YZ
——
100
Bba
rs, a
nd r
ough
ly fo
rged
pie
ces,
allo
y st
eel,
spec
ial
type
s C
lass
2.
(4)T
>22
100
B67
243
Oth
er b
loom
s,
bille
ts,
ingo
ts,
slab
s,
shee
tLb
.S
TE
E 8
XY
Z—
•—ba
rs, a
nd r
ough
ly f
orge
d pi
eces
, allo
y st
eel.
(5)*
>22
6724
4 B
loom
s, b
illet
s s
labs
, an
d sh
eet
bars
, pr
o-Lb
.S
TE
E 8
WX
YZ
' ..
.10
0B
ject
ile a
nd s
hell
stee
l. (I
)7»2
5Lb
.S
TE
E 8
ZB
6724
4 O
ther
ca
rbon
st
eel
bloo
ms,
bi
llets
, sl
abs,
Lb.
ST
EE
8X
YZ
——
100
Bsh
eet b
ars
and
rou
ghly
for
ged
piec
es.
(3)2
2 67
273
Allo
y st
eel
coils
for
rer
ollin
g, s
peci
al t
ypes
Lb.
ST
EE
3T
VW
XY
Z50
010
0—
A E
-8C
lass
1.
(I)2
267
273
Oth
er a
lloy
stee
l co
ils f
or r
erol
ling.
(2
and
Lb.
ST
EE
8W
XY
Z_
100
B3
)22
6727
4 C
arbo
n st
eel
coils
for
rer
ollin
g. (
I)22
......
..Lb
.S
TË
E 8
WX
YZ
100
B67
290
Bla
nks
for
tube
s an
d pi
pes,
allo
y st
eel,
spe-
Lb.
ST
ËE
3T
VW
XY
Z50
010
0—
A i
i-Tci
al ty
pes
Cla
ss 1
. (1
)*; 2
2>22
67
290’
O
ther
nic
kel-
bear
ing
stai
nles
s st
eel
blan
ksLb
.S
TE
E 4
TV
WX
YZ
500
100
E-7
for
tube
s an
d pi
pes,
as
follo
ws:
(a
) A
ISI
type
30
9-S-
Cb-
Ta,
or (
b)
cont
aini
ng a
tot
al o
f 35
per
ce
nt o
r m
ore
of a
lloyi
ng e
lem
ents
. (1
)*>
22>2
210
0B
6729
0 B
lank
s fo
r tu
bes
and
pipe
s, a
lloy
stee
l, sp
e-Lb
.S
TE
E 8
WX
YZ
—ci
al ty
pes
Cla
ss 2
. (1
)3> 2
2> 22
67
290
Oth
er b
lank
s fo
r tu
bes
and
pipe
s'of
iro
n or
Lb.
ST
EE
8X
YZ
__
100
Bst
eel.
(I)»
,2«.
2267
313
Wir
e ro
ds, a
lloy
stee
l, sp
ecia
l ty
pes
Cla
ss 1
.Lb
.S
TE
E O
TV
WX
YZ
500
100
A E
-S(!
)»•*
»
I. 93
—FR
IDAY
, M
AY 1
3, 1
966 /
7044 RULES AND REGULATIONS
Dep
artm
ent
of C
omm
erce
E
xpor
t C
ontr
ol C
omm
odit
y N
um
ber
and
Uni
t '
Proc
essi
ne
Cod
e an
d R
elat
ed
Com
mod
ity
Gro
up
No.
Val
idat
ed
Lice
nse
R
equ
ired
for
Cou
ntr
y G
rou
ps
Sh
own
Bel
ow
GL
V $
Val
ue
Lim
its
for
Sh
ipm
ent t
o C
oun
try
Gro
ups
Spe
cial
Prov
isio
ns
Com
mod
ity
Des
crip
tion
TV
X
673X
3 W
ire
rods
, as
fol
low
s: (
a)
cont
aini
ng 6
per
ce
nt o
r m
ore
coba
lt,
(b)
AIS
I ty
pe 3
09-S
-Cb-
Ta,
or (
c) c
onta
inin
g a
tota
l of
35
perc
ent
or m
ore
of
allo
ying
ele
men
ts.
(2)?
< 25
Lb.
ST
EE
'8W
XY
Z—
100
B
6731
3 A
lloy
stee
l w
ire
rods
, sp
ecia
l ty
pes
Cla
ss 2
. (3
)"Lb
.S
TE
E 8
WX
YZ
——
-10
0B
6731
3 O
ther
allo
y st
eel w
ire
rods
. (4
) "r> .
......
......
..Lb
.S
TE
E 8
XY
Z—
»10
0B
6731
4 W
ire
rods
, ca
rbon
ste
el.
(I)2
5 ....
......
......
....
Lb.
ST
EE
8X
YZ
—_
100
B67
323
Allo
y st
eel b
ars
and
rods
, spe
cial
typ
es C
lass
1.
(1
)»Lb
.S
TE
E 3
TV
WX
YZ
500
100
—A
E-8
6732
3 A
lloy
stee
l ba
rs a
nd 'r
ods,
con
tain
ing'
6 p
er
cent
or
mor
e co
balt.
(2
) 25
Lb.
ST
EE
8W
XY
Z—
100
B
6732
3 A
lloy
stee
l ba
rs
and
rods
, pr
ojec
tile
and
sh
ell s
teel
, hot
rol
led.
(3
)T> 2
5Lb
.S
TE
E 8
.W
XY
Z—
100
B
6732
3 O
ther
allo
y st
eel b
ars
and
rods
, spe
cial
typ
es
Cla
ss 2
. (4
) 25
Lb.
ST
EE
8W
XY
Z—
100
B
6732
3 N
icke
l-be
arin
g st
eel
bars
and
rod
s, a
s fo
llo
ws:
(a
) A
ISI
type
309
-S-C
b-Ta
, or
(b)
cont
ain
ing»
a t
otal
of
35
perc
ent
or m
ore
of
allo
ying
el
emen
ts.
(6)2
5
Lb.
ST
EE
8W
XY
Z10
0B
6732
3 O
ther
allo
y st
eel b
ars
and
rods
. (6
)22 .
......
.Lb
.S
TE
E 8
XY
Z—
—10
0B
6732
4 B
ars
and
rods
, pro
ject
ile a
nd s
hell
stee
l, ho
t ro
lled
carb
on s
teel
. (1
)25
Lb.
ST
EE
8W
XY
Z—
—19
0B
6732
4 O
ther
-car
bon
stee
l bar
s an
d ro
ds;
and
con
cret
e re
info
rcin
g ba
rs.
(2) 2
5Lb
.S
TE
E 8
Z—
■*—
—B
6734
3 A
ngle
s, s
hape
s an
d se
ctio
ns h
avin
g a
max
im
um c
ross
sec
tion
al d
imen
sion
of 3
inch
es o
r m
ore,
al
loy
stee
l, sp
ecia
l typ
es C
lass
1.
(1) »
.22
Lb.
ST
EE
3T
VW
XY
Z50
010
0A
E-8
6734
3 O
ther
nic
kel-
bear
ing
stee
l ang
les,
sha
pes
and
sect
ions
h
avin
g a
max
imum
cr
oss
sect
iona
l di
m
ensi
on o
f 3
inch
es o
r m
ore,
as
follo
ws:
(a
) A
ISI
type
809
-S-C
b-Ta
, or
(b
) co
ntai
ning
a t
otal
of
35
perc
ent o
r m
ore
of a
lloyi
ng
elem
ents
. (2
)T>2
2
Lb.
ST
EE
8W
XY
Z10
0B
6734
3 A
lloy
stee
l an
gles
, sh
apes
and
sec
tions
, hav
in
g, a
max
imum
cr
oss
sect
iona
l di
men
sion
of
3 in
ches
“hr
mor
e, s
peci
al t
ypes
Cla
ss 2
. (8
)T>2
5
Lb.
ST
EÈ
8W
XY
Z10
0B
6734
3 O
ther
ang
les,
sha
pes
and
sect
ions
, h
avin
g a
max
imum
cro
ss s
ectio
nal d
imen
sion
of
3 in
ches
or
mor
e of
allo
y st
eel.
(4)2
2
Lb.
ST
EE
8X
YZ
100
B
6734
4 C
arbo
n st
eel a
ngle
s, s
hape
s an
d se
ctio
ns h
av
ing
a m
axim
um c
ross
sec
tiona
l di
men
sion
of
3
inch
es o
r m
ore;
and
car
bon
stee
l she
et p
iling
. (I
)22
Lb.
ST
EE
8Z
B
6735
3 A
ngle
s, s
hape
s an
d se
ctio
ns .h
avin
g a
max
im
um
cros
s se
ctio
nal
dim
ensi
on
of l
ess
than
8
inch
es, a
lloy
stee
l, sp
ecia
l typ
es C
lass
1.
(1)T
<22
Lb.
ST
EE
3T
VW
XY
Z50
010
0A
E-8
6735
3 O
ther
allo
y st
eel a
ngle
s, s
hape
s, a
nd s
ectio
ns
hav
ing
a m
axim
um c
ross
sec
tiona
l di
men
sion
of
less
tha
n 3
inch
es,
cont
aini
ng 6
per
cent
or
mor
e co
balt.
(2
)*<2
2
Lb.
ST
EE
8W
XY
Z.1
00B
FEDE
RAL
REGI
STER
, VO
L. 31
Dep
artm
ent
of
Com
mer
ce
Exp
ort
Con
trol
Com
mod
ity
Nu
mbe
r an
dU
nit
Proc
essi
ng
Cod
e an
d R
elat
ed
Com
mod
ity
Gro
up
No.
Val
idat
ed
Lice
nse
R
equ
ired
for
Cou
ntr
y G
roup
s S
how
n B
elow
GL
V $
Val
ue
Lim
its
for
Sh
ipm
ent t
o C
oun
try
Gro
up«
Spe
cial
Prov
isio
nsL
ist
Com
mod
ity
Des
crip
tion
T.
VX
6735
3 N
icke
l-be
arin
g st
eel
angl
es,
shap
es a
nd s
ec
tions
hav
ing
a m
axim
um c
ross
sec
tiona
l dim
ensi
on
of l
ess
than
3 i
nche
s, a
s fo
llow
s:
(a)
AIS
I ty
pe
309-
S-C
b-Ta
, or
(b
) co
ntai
ning
a t
otal
of
35 p
er
cent
or
mor
e o
f al
loyi
ng e
lem
ents
. (3
)T< 2
2
Lb.
ST
EE
8W
XYZ
—*
100.
B
6735
3 A
ngle
s, s
hape
s .ja
nd s
ectio
ns,
proj
ecti
le a
nd
shel
l ste
el, a
lloy
stee
l;' (
4)7
> 22
Lb.
ST
EE
8W
XYZ
'10
0B
6735
3 A
lloy
stee
j, an
gles
, sh
apes
and
sec
tions
hav
in
g a
max
imum
-cro
ss s
ectio
nal
dim
ensi
on o
f le
ss
than
3 i
nche
s, s
peci
al t
ypes
Cla
ss 2
. (5
) *•
22
Lb.
ST
EE
8W
XYZ
'10
0B
6735
3 O
ther
ang
les,
sha
pes,
and
sec
tions
, ha
ving
a
max
imum
cro
ss s
ectio
nal
dim
ensi
on o
f le
ss t
han
3 in
ches
, of a
lloy
stee
l. (6
) 22
Lb.
ST
EE
8X
YZ10
0B
6735
4 A
ngl
es,
shap
es,
and
sect
ions
, pr
ojec
tile
and
sh
ell
stee
l, ca
rbon
ste
el,
havi
ng a
max
imum
cro
ss
. sec
tiona
l dim
ensi
on o
f le
ss th
an 3
inch
es.
(1)?
<22
Lb.
ST
EE
8
*W
XYZ
100
B
6735
4 O
ther
car
bon
stee
l an
gles
, sh
apes
, an
d se
ctio
ns, h
avin
g a
max
imum
cro
ss s
ectio
nal d
imen
sion
of
les
s th
an 3
inc
hes.
(2
)“
Lb.
•S
TE
E 8
ZB
6744
3 A
lloy
stee
l pl
ates
and
she
ets,
spe
cial
typ
es,
Cla
ss X
.' (X
) 20
Lb.
ST
EE
3TV
WX
YZ50
010
0A
E-8
6744
3 A
lloy
stee
l pl
ates
and
she
ets,
sui
tabl
e fo
r m
akin
g pi
pe h
avin
g th
e fo
llow
ing
spec
ifica
tions
: of
a
size
gre
ater
than
19
inch
es o
.d. a
nd h
avin
g a
yiel
d st
reng
th g
reat
er t
han
40,0
00 p
si a
s de
term
ined
by
AP
I (A
mer
ican
Pet
role
um In
stit
ute
) te
st.
(2)3
2
Lb.
ST
EE
eV
WX
YZ10
0E
-8
6744
3 E
lect
rica
l (s
ilico
n)
stee
l sh
eet,
grai
n
ori
ente
d, w
ith
a t
hick
ness
of
0.00
4 in
ch (
0.1
mm
.) or
le
ss,
rega
rdle
ss o
f co
re l
oss
char
acte
rist
ics.
(Sp
eci
fy t
hick
ness
in
deci
mal
par
ts o
f an
inc
h or
in
mill
imet
ers.
) (4
)22
Lb.
ST
EE
3TV
WX
YZ£0
010
0E-
8
6744
3 O
ther
allo
y st
eel p
late
s an
d sh
eets
. (3
, 5 a
nd
6) 22
6744
4 C
arbo
n st
eel
shee
ts a
nd;p
late
s su
itabl
e fo
r m
akin
g pi
pe h
avin
g th
e fo
llow
ing
spec
ifica
tions
: o
f a
size
gre
ater
tha
n 19
inc
hes
o.d.
and
hav
ing
a yi
eld
stre
ngth
gre
ater
tha
n 40
,000
psi
as'
dete
rm
ined
by
AP
I (A
mer
ican
Pe
trol
eum
In
stit
ute
) te
st.
(I)2
2
Lb.
ST
EE
8W
XYZ
—10
0B
Lb.
ST
EE
6V
WX
YZ10
0E
-8
6744
4 Sk
elp,
car
bon
stee
l or
wro
ugh
t ir
on.'2
'32,
...
Lb.
ST
EE
8X
YZ—
•—
100
B67
444
Oth
er ir
on o
r st
eel p
late
s an
d sh
eets
, in
clud
in
g bl
ack
plat
e. (
2)3
2Lb
.S
TE
E 8
WX
YZ10
0B
6747
0 Ti
n m
ill p
rodu
cts.
[R
epor
t te
rnep
late
in
Ex
port
Con
trol
Com
mod
ity N
o. 6
7480
.] (I
)3'3
2Lb
.T
NP
L 8
WX
YZmm
m.10
0B
6748
0 St
eel
shee
ts a
nd p
late
s su
itabl
e fo
r m
akin
g pi
pe h
avin
g th
e fo
llow
ing
spec
ifica
tion
s: o
f a
size
gr
eate
r th
an
19 i
nche
s o.
d. a
nd h
avin
g a
yiel
d st
reng
th g
reat
er t
han
40,0
00 p
si a
s de
term
ined
by
AP
I (A
mer
ican
Pet
role
um I
nst
itu
te)
test
. (I
)32
Lb.
ST
EE
6V
WX
YZ10
0E-
8
6748
0 A
lloy
stee
l sh
eets
and
pla
tes,
coa
ted,
spe
cial
ty
pes C
lass
L (
2)3
2Lb
.S
TE
E 3
TVW
XYZ
500
100
A E
-8
I. 93
—FR
IDAY
, M
AY 1
3, 1
966
RULES AND REGULATIONS 7045
Dep
artm
ent
of
Com
mer
ce
Exp
ort
Con
trol
Com
mod
ity
Nu
mbe
r an
dC
omm
odit
y D
escr
ipti
onUn
itPr
ocea
ain
g C
odo
and
Rel
ated
C
omm
odit
y G
rou
p N
o»
Val
idat
ed
Lice
nse
R
equ
ired
for
Cou
ntr
y G
roup
s Sh
own
Bel
ow
GL
Vt
Val
ue
Lim
its
for
Sh
ipm
ent t
o C
oun
try
Gro
ups
Spe
cial
Prov
isio
ns
TV
' X
6748
0 Ot
her
stee
l pla
tes
and
shee
ts, c
oate
d. (
3)25
Lb.
STEE
8W
XYZ
__
100
B67
503
Allo
y st
eel
hoop
and
str
ip,
incl
udin
g sk
elp,
sp
ecia
l typ
es C
lass
1. (
1,3,
8 an
d 11
) *•*
»Lb
.ST
EE 8
TVW
XYZ
500
100
—A
E-8
6750
3 Al
loy
stee
l ho
op a
nd s
trip
, in
clud
ing
skel
p,
suita
ble
for m
akin
g pi
pe h
avin
g th
e fo
llowi
ng s
pe
cific
atio
ns:
of a
siz
e gr
eate
r th
an 1
9 in
ches
ad.
an
d ha
ving
a y
ield
str
engt
h gr
eate
r th
an 4
0,00
0 ps
i as
det
erm
ined
by
API
(Am
eric
an P
etro
leum
In
stitu
te) t
est.
(2,6
and
9)*
.**
Lb.
STEE
6V
WX
YZ10
0E-
8
6750
3 Ni
ckel
-bea
ring
stee
l hoo
p an
d st
rip, i
ndud
-' in
g sk
elp,
as
follo
ws:
(a)
AIS
I ty
pe 3
09-S
-Cb-
Ta,
or (
b) c
onta
inin
g a
tota
l of 3
5 pe
rcen
t or m
ore
of
allo
ying
elem
ents
. (4
and
12)r-
31
Lb.
STEE
8W
XYZ
100
B
6750
3 Th
erm
o bi
met
al,
ther
mom
etal
, an
d th
erm
ost
atic
met
al, c
hief
valu
e st
eel.
(7)*
- **
L%.
STEE
6V
WX
YZ—
100
—E-
8
6750
3 Al
loy
stee
l, el
ectr
ical
(si
licon
) st
rip,
grai
n or
ient
ed, w
ith a
thic
knes
s of
0.0
04 in
ch (
0.1
mm
.) or
les
s, re
gard
less
of
com
los
s ch
arac
teris
tics.
(Spe
cify
thic
knes
s in
dec
imal
par
ts o
f an
inch
or
In m
illim
eter
s.) (
14)**
Lb.
STEE
3TV
WX
YZ50
010
0A
E-8
Lb.
STEE
8X
YZ10
0B
6750
3 Ot
her
allo
y st
eel h
oop
and
strip
. (5
, 13
, 15
and
16)T-
2*Lb
.ST
EE 8
WX
YZ—
—10
0B
6750
4 Ca
rbon
stee
l, el
ectr
ical
, (si
licon
) str
ip, g
rain
or
ient
ed, w
ith a
thic
knes
s of
0.0
04 in
ch (
0.1
mm
.) or
less
, reg
ardl
ess o
f cor
e lo
ss ch
arac
teris
tics.
(Spe
ci
fy t
hick
ness
in
deci
mal
par
ts o
f an
inc
h or
in
mill
imet
ers.)
(1)
“
Lb.
STEE
3TV
WX
YZ50
010
0A
E-8
6750
4 Ca
rbon
ste
el h
oop
and
strip
, gi
ldin
g m
etal
cl
ad. (
3)*.
**Lb
.ST
EE 5
TVW
XYZ
500
100
—A
E-8
6750
4 Ca
rbon
st
eel
hoop
an
d st
rip,
Incl
udin
g sk
elp,
sui
tabl
e fo
r m
akin
g-pi
pe h
avin
g th
e fo
llow
ing
spec
ifica
tions
: of a
size
gre
ater
than
19
inch
es
o.d.
and
hav
ing
a yi
eld
stre
ngth
gre
ater
tha
n 40
,000
psi
as d
eter
min
ed b
y A
PI (
Amer
ican
Pet
ro
leum
Inst
itute
) tes
t. (4
)*.*
*
Lb.
STEE
6V
WX
YZ10
0E-
8
Lb.
STEE
8X
YZ—
—10
0B
Lb.
STEE
8z
——
—B
6750
4 Ot
her
carb
on s
teel
hoo
p an
d st
rip.
(2 a
nd
6)»
Lb.
STEE
8W
XYZ
——
100
B
Lb.
STEE
8Y
Z■
mmmB
6761
0 Ot
her i
ron
or st
eel r
ails
, new
and
use
d. (
2)**
Lb.
STEE
8Z
B67
620
Kail
join
ts, r
ail t
ie p
late
s, an
d ot
her
sleep
er
and
railw
ay t
rack
mat
eria
l of
iron
or
stee
l. (1
)**
Lb,
STEE
8Z
——
—■
B
6770
3 Ot
her
allo
y st
eel w
ire,
coat
ed o
r un
coat
ed.
<5)*
Lb.
STEE
8X
YZ10
0B
FEDE
RAL
REGI
STER
, VO
L. 3
1
Dep
artm
ent o
f C
omm
erce
E
xpor
t C
ontr
ol C
omm
odit
y N
um
ber
and
Com
mod
ity
Des
crip
tion
Un
it
Pn
cm
ím
Cod
« an
d R
elat
ed
Com
mod
ity
Gro
up
No.
Val
idat
ed
Lice
nce
R
equ
ired
for
Cou
ntr
y G
roup
M
Sh
own
Bel
ow
OL
V 9
Val
uó
Lim
ite
for
Sh
ipm
ent t
o C
oun
try
Gro
up*
Spo
eto!
Prov
toto
na
TV
X
NONF
ERRO
US M
ETAL
S68
310
Unwr
ough
t allo
ya c
ompo
sed
of 5
0 pe
rcen
t or
Lb.
NO
NE
10TV
WX
YZ10
010
0m
ore
copp
er, a
nd a
lloys
of c
hief
wei
ght c
oppe
r, ir
re
spec
tive
of n
icke
l con
tent
. (2
)T*68
321
Bars
, rod
s, an
gles
, sha
pes,
sect
ions
, and
wir
eLb
.N
ON
F 10
TVW
XYZ
100
100
of a
lloys
com
pose
d of
50
perc
ent
or m
ore
copp
er,
and
allo
ya o
f ch
ief w
eigh
t co
pper
, irr
espe
ctiv
e of
ni
ckel
cont
ent.
(2)T*
6832
2 Pl
ates
, sh
eets
, st
rips,
powd
ers,
flake
s, an
dLb
.N
ON
E 1
0TV
WX
YZ10
010
0fo
il of
allo
ys c
ompo
sed
of 5
0 pe
rcen
t or
mor
e co
ppe
r, an
d al
loys
of c
hief
wei
ght c
oppe
r, irr
espe
ctiv
e of
nick
el co
nten
t (6
)r*68
323
Tube
s, p
ipes
, bl
anks
and
fitt
ings
the
refo
r,Lb
.N
ON
E 10
TVW
XYZ
100
100
and
hollo
w ba
rs, o
f allo
ys c
ompo
sed
of 5
0 pe
rcen
t or
mor
e co
pper
, and
allo
ys o
f chi
ef w
eigh
t co
pper
, irr
espe
ctiv
e of
nic
kel c
onte
nt (
2 an
d 8)
’*68
401
Alum
inum
allo
y in
gots
and
oth
er u
nwro
ught
Lb.
NO
NE
8W
XYZ
tooB
form
s, an
d wi
re,
bars
, ro
ds,
angl
es,
shap
es,
and
sect
ions
hav
ing
(a)
an a
vera
ge c
oppe
r co
nten
t of
1
perc
ent
or m
ore
irres
pect
ive
of o
ther
ele
men
ts,
or (
b) a
n av
erag
e co
pper
con
tent
of
less
tha
n 1
* pe
rcen
t an
d (i
) a
zinc
con
tent
of
4 pe
rcen
t or
m
ore,
(li
) a
silic
on c
onte
nt o
f 3.5
per
cent
or m
ore,
or
(iii
) a
mag
nesiu
m c
onte
nt o
f 9.
5 pe
rcen
t or
m
ore.
(1 th
roug
h 10
)*>**
6840
1 Ot
her
alum
inum
or
alum
inum
allo
y ba
rs,
Lb.
NO
NE
•X
YZ10
0B
.ro
ds,
angl
es,
shap
es a
nd
sect
ions
. (1
th
roug
h li
»*.*
»68
401
Othe
r al
umin
um o
r al
umin
um a
lloy
ingo
tsLb
.N
ON
E 8
YZ
Ban
d ot
her
unwr
ough
t fo
rms,
and
bare
wire
. (1
th
roug
h 10
)*. *»
6842
2 Al
umin
um a
lloy
plat
es a
nd s
heet
s ha
ving
Lb.
NO
NE
8W
XYZ
100
B(a
) an
ave
rage
copp
er co
nten
t of 1
per
cent
or m
ore
irres
pect
ive
of o
ther
ele
men
ts,
(b)
an a
vera
ge
copp
er c
onte
nt o
f le
ss t
han
1 pe
rcen
t an
d (1
) a
zinc
con
tent
of
4 pe
rcen
t or
mor
e, (
ii)
a sil
icon
co
nten
t of
3.5
perc
ent
or m
ore,
or
(iil)
a m
agne
siu
m c
onte
nt o
f 9.6
per
cent
or m
ore.
(1
and
2)»>
**
6842
2 Ot
her
alum
inum
or
alum
inum
allo
y pl
ates
Lb.
TEX
T 8
YZ
'B
and
shee
ts.
(1 a
nd 2
)»> **
6842
5 Ot
her
alum
inum
or
alum
inum
allo
y tu
bes,
Lb.
NO
NE
8W
XYZ
mrn
100
Bpi
pes,
and
tube
blo
oms,
havi
ng (
a) a
n av
erag
e co
pper
con
tent
of
1 pe
rcen
t or
mor
e irr
espe
ctiv
e of
oth
er e
lem
ents
, (b
) an
ave
rage
cop
per
cont
ent
of le
ss t
han
1 pe
rcen
t an
d (i
) a
zinc
con
tent
of 4
pe
rcen
t or
mor
e, (
ii)
a sil
icon
con
tent
of 3
.5 p
er
cent
or m
ore,
or
(iii)
a m
agne
sium
con
tent
of 9
.5 pe
rcen
t or m
ore.
(2) *
,
. 93
—FR
IDAY
, M
AY 1
3, 1
966
7046 RULES AND REGULATIONS
No. 93-
Dep
artm
ent o
f Com
mer
ce
Exp
ort
Con
trol
Com
mod
ity
Num
ber
and
Uni
tPr
oces
sin
e C
ode
and
Rel
ated
Val
idat
ed
Lice
nse
R
equ
ired
for
GL
V 1
Val
ue
Lim
its
for
Sh
ipm
ent t
o C
oun
try
Gro
ups
Spm
Upr
ovis
ions
Lbt
Com
mod
ity
Des
crip
tion
Gro
up
No.
Show
n B
elow
TV
X
6842
5 Al
umin
um o
r al
umin
um a
lloy
wel
ded
irri
ga
tion
tubi
ng,
cut
to l
engt
h an
d no
t fu
rth
er f
abri
ca
ted.
"1
Lb.
NO
NF
8Y
Z—
——
B
6842
5 O
ther
alu
min
um o
r al
umin
um a
lloy
tube
s,
pipe
s,an
d tu
be b
loom
s. (
3)*
Lb.
NO
NF
8X
YZ
——
100
B
6894
1 A
lloy
stee
l sc
rap
cont
aini
ng 1
pe
rcen
t or
m
ore
tung
sten
by
wei
ght.
(S
ee §
399
.2,
Inte
rpre
ta
tion
s 10
and
12)
. (2
)20
Lb.
ST
EE
ZT
VW
XY
Z50
010
0
6894
2 O
ther
m
olyb
denu
m
or
mol
ybde
num
al
loy
wir
e. (
4)*
i
Lb.
MIN
L 8
XY
Z10
0B
6894
2 O
ther
m
olyb
denu
m
or
mol
ybde
num
al
loy,
w
roug
ht,
incl
udin
g fo
il.
(5 a
nd 7
)TLb
.M
INL
3T
VW
XY
Z50
010
0A
E-8
6894
3 O
ther
tan
talu
m o
r ta
ntal
um a
lloy,
wro
ught
, in
clud
ing
foil.
(3
and
4) *
Lb.
MIN
L 1
TV
WX
YZ
500
100
MW
A E
-8
6895
0 B
ism
uth
or b
ism
uth
allo
ys,
wro
ugh
t or
un
wro
ught
, ex
cept
bul
lion,
and
was
te a
nd s
crap
. (2
an
d3
)T
Lb.
MIN
L 8
XY
Z10
0B
6895
0 G
alliu
m m
etal
pow
ders
; an
d ga
llium
met
al,
allo
ys,
exce
pt
elec
tron
ic
grad
es
cont
aini
ng
less
th
an 1
per
cent
gal
lium
. (1
4 an
d 15
)7
Lb.
MIN
L 2
TV
WX
YZ
500
E-7
6895
0 M
anga
nese
and
man
gane
se a
lloys
, w
rou
ght
or u
nwro
ught
, an
d w
aste
and
scr
ap,
exce
pt e
lec
trol
ytic
man
gane
se m
etal
. (1
9)*
Lb.
MIN
L 8
ZB
6895
0 Po
lycr
ysta
lline
sili
con
of
a pu
rity
of
99.9
9 pe
rcen
t or
mor
e an
d m
onoc
ryst
allin
e si
licon
1*Lb
.M
INL
1T
VW
XY
Z50
0-
A E
-7
6895
0 Po
lycr
ysta
lline
sili
con
of a
pu
rity
of
99.9
pe
rcen
t up
to
but
not
incl
udin
g 99
.99
perc
ent.1
*Lb
.M
INL
2T
VW
XY
Z50
050
0E
-7
6895
0 Ti
tani
um
or
titan
ium
al
loys
, un
wro
ught
, n.
e.c.
, and
was
te a
nd s
crap
. (2
3)7
Lb.
MIN
L 1
TV
WX
YZ
500
100
A*
6895
0 Ti
tani
um o
r tit
aniu
m a
lloy
mill
sha
pes,
and
w
roug
ht, n
.e.c
. (2
5)7
Lb.
MIN
L L
TV
WX
YZ
500
100
A E
-8
6895
0 O
ther
bas
e m
etal
s an
d al
loys
, and
was
te a
nd
scra
p. (
4,34
and
36)
**
MAN
UFA
CTU
RE
S O
F M
ETA
L, N
JE.C
.
Lb.
MIN
L 8
YZ
B
6911
0 O
ther
iro
n or
ste
el s
heet
met
al c
onst
ruct
ion
mat
eria
l, ex
cept
cen
tral
hea
ting
or
cool
ing
duct
s;
and
iron
and
ste
el b
ridg
es a
nd p
arts
. (2
, 3 a
nd 4
)*
Lb.
ST
EE
8W
XY
Z10
0B
6911
0 Fi
nish
ed
stru
ctur
al
part
s an
d st
ruct
ures
, ir
on o
r st
eel,
as fo
llow
s: f
abri
cate
d st
eel
plat
e, i
ncl
udin
g st
acks
and
wel
dmen
ts;
arch
itec
tura
l an
d or
nam
enta
l w
ork;
anc
hors
and
fit
ting
s fo
r re
in
forc
ing
refr
acto
ry w
alls
; bu
lkhe
ad (
wat
er g
ates
); ga
ngw
ays;
sl
uice
ga
tes;
gu
ardr
ails
; pl
atfo
rms;
po
rtho
les
not s
peci
ally
des
igne
d fo
r m
ilita
ry w
ater
cr
aft;
pra
yer
rails
; lo
adin
g ra
mps
(no
n-m
echa
ni
cal)
; sc
affo
ldin
g eq
uipm
ent;
and
turn
stile
s, n
ot
elec
tric
or
coin
-ope
rate
d. (
6 a
nd 7
)1*
FIN
P 8
YZ
B
6911
0 O
ther
fin
ishe
d st
ruct
ures
an
d st
ruct
ura
l pa
rts,
n.e
.c.
(8,9
and
10)
17F
INP
8Z
1
B
FEDE
RAL
REGI
STER
, VO
L 31
,
Dep
artm
ent
of
Com
mer
ce
Exp
ort
Con
trol
Com
mod
ity
Nu
mbe
r an
dU
nit
Proc
essi
ng
Cod
e an
d R
elat
ed
Com
mod
ity
Gro
up
No.
Val
idat
ed
Lice
nse
R
equi
red
for
Cou
ntr
y G
roup
s Sh
own
Bel
ow
GL
V 9
Val
ue
Lim
its
for
Sh
ipm
ent t
o C
oun
try
Gro
ups
Spe
cial
Prov
isio
n?L
ist
Com
mod
ity
Des
crip
tion
T
jV
X
6921
1 Li
quef
ied
gas
cont
aine
rs,
iron
or
st
eel,
jack
eted
onl
y; (
a)
250
to 5
00 g
allo
n ca
paci
ty,
de
sign
ed f
or l
iqui
d flu
orin
e, o
r (b
) 50
0 ga
llon
ca
paci
ty o
r ove
r, d
esig
ned
for
liqui
d ni
trog
en, o
xyge
n,
hydr
ogen
, oz
one,
hel
ium
, ar
gon,
or
fluor
ine,
ex
cept
¡¡-s
hell
or 3
-she
ll co
ntai
ners
rat
ed f
or a
n av
er
age
evap
orat
ion
loss
of
over
5 p
erce
nt p
er 3
1-
hour
per
iod.
(I)
25
No.
FIN
P 1
TV
WX
YZ
500
100
A E
-8.
6921
1 O
ther
liqu
efie
d ga
s co
ntai
ners
, ir
on o
r st
eel,
jack
eted
on
ly:
(a)
desi
gned
to
mai
ntai
n te
mpe
ra
ture
s be
low
min
us 1
30*
C.
(min
us 2
02*
F:)
, or
(b
) 50
0 ga
llon
capa
city
or
over
. (2
)25
No.
FIN
P 4
TV
WX
YZ
500
500
E-8
6921
1 Se
ptic
tan
ks,
iron
or
stee
l. (3
)**
No.
FIN
P 8
YZ
——
B69
211
Oth
er s
teel
sto
rage
tan
ks,
lined
. (4
)MN
o.S
TE
E 8
WX
YZ
MW—
100
B69
212
Liqu
efie
d ga
s co
ntai
ners
, co
pper
, ja
cket
ed
only
: (a
) 25
0 to
500
gal
lon
capa
city
, de
sign
ed f
orv
liq
uid
fluor
ine,
or
(b)
500
gallo
n ca
paci
ty o
r ov
er,
desi
gned
fo
r liq
uid
nitr
ogen
, ox
ygen
, hy
drog
en,,
ozon
e, h
eliu
m,
argo
n, o
r flu
orin
e, e
xcep
t 3-
shel
l or
3-sh
eU c
onta
iner
s ra
ted
for
an a
vera
ge e
vapo
ra
tion
loss
of
over
5 p
erce
nt p
er 3
1-ho
ur p
erio
d.
(1)“
No.
FIN
P 1
TV
WX
YZ
500
100
A E
-8
6921
2 O
ther
liqu
efie
d ga
s co
ntai
ners
, co
pper
, jac
ket
ed o
nly
: (a
) de
sign
ed t
o m
aint
ain
tem
pera
ture
s be
low
min
us 1
30*
C.
(min
us 2
02*
F.)
, or
(b
) -50
0 ga
llon
capa
city
or
over
. (2
)2*
No.
FIN
P 4
TV
WX
YZ
500
500
E-8
6921
2 Se
ptic
tan
ks o
f co
pper
, lin
ed
or u
nlin
ed.
(3)«
No.
FIN
P 8
XY
Z—
100
B
6921
2 G
as s
tora
ge c
onta
iner
s, c
oppe
r. (
4)2
*N
o.N
ON
F 8
WX
YZ
——
100
B69
213
Liqu
efie
d ga
s co
ntai
ners
, alu
min
um, j
acke
ted
only
: (a
) 25
0 to
500
gal
lon
capa
city
, de
sign
ed f
or
liqui
d flu
orin
e, o
r (b
) 50
0 ga
llon
capa
city
or
over
, de
sign
ed
for
liqui
d ni
trog
en,
oxyg
en,
hydr
ogen
, oz
one,
hel
ium
, arg
on o
r flu
orin
e, e
xcep
t 3-s
hell
or 3
- sh
ell
cont
aine
rs r
ated
for
an
aver
age
evap
orat
ion
loss
of
over
5 p
erce
nt p
er 3
1-ho
ur p
erio
d. (
l),s
No.
FIN
P 1
TV
WX
YZ
500
100
A E
-8
6921
3 O
ther
liq
uefie
d ga
s co
ntai
ners
, al
umin
um,
jack
eted
on
ly;
(a)
desi
gned
to
mai
ntai
n te
mpe
ra
ture
s be
low
min
us 1
30*
C.
(min
us 2
02*
F.)
, or
(b)
500
gallo
n ca
paci
ty o
r ov
er.
(2)2
8
No.
,F
INP
4T
VW
XY
Z50
050
0E
-8
6921
3 Se
ptic
tan
ks,
lined
or
unlin
ed, o
f al
umin
um.
(3)»
No.
FIN
P 8
YZ
—B
6922
1 Li
quef
ied
gas
cont
aine
rs,
iron
or
st
eel,
jack
eted
on
ly:
(a)
250
to 5
00 g
allo
n ca
paci
ty, d
esi
gned
for
liq
uid
fluor
ine,
or
(b)
500
gallo
n ca
pa
city
or o
ver,
des
igne
d fo
r liq
uid
nitr
ogen
, oxy
gen,
hy
drog
en,
ozon
e, h
eliu
m, a
rgon
, or
fluo
rine
, ex
cept
3-
shel
l or
3-sh
ell
cont
aine
rs r
ated
for
an
aver
age
evap
orat
ion
loss
of
over
5 p
erce
nt p
er 3
1-ho
ur
perio
d. (
1)2
S
No.
FIN
P 1
TV
WX
YZ
500
100
A E
-8
!, 93
—FR
IDAY
, M
AY 1
3, 1
966
RULES AND REGULATIONS 7047
Dep
artm
ent
of
Com
mer
ce
Exp
ort
Con
trol
Com
mod
ity
Nu
mbe
rU
nit
Proc
essi
ng
Cod
e an
d R
elat
edC
omm
odit
yG
rou
p N
o,
Val
idat
ed
Lice
nse
R
equ
ired
for
Cou
ntr
y G
roup
s S
how
n B
elow
GL
V $
Val
ue
Lim
its
for
Sh
ipm
ent t
o C
oun
try
Gro
ups
Spe
cial
Prov
isio
nsL
ist
Com
mod
ity
Des
crip
tion
T 1
v
1X
6922
1 O
ther
liqu
efie
d ga
s co
ntai
ners
, ir
on o
r st
eel,
jack
eted
on
ly;
(a)
desi
gned
to
mai
ntai
n te
mpe
ra
ture
s be
low
min
us 1
30°
C.
(min
us 2
02°
F.)
, or
(b
) 50
0 ga
llon
capa
city
or
over
. (2
)18
No.
FIN
P 4
TV
WX
YZ
500
500
—E
-8
6922
1 O
ther
gas
shi
ppin
g co
ntai
ners
, ir
on o
r st
eel,
fille
d or
unf
illed
. (3
)21
No.
ST
EE
8W
XY
Z""
"10
0B
6922
2 Li
quef
ied
gas
cont
aine
rs, a
lum
inum
, jac
kete
d on
ly:
(a)
250
to 5
00 g
allo
n ca
paci
ty,
desi
gned
for
liq
uid
fluor
ine,
or
(b)
500
gallo
n ca
paci
ty o
r ov
er,
desi
gned
.fo
r liq
uid
nitr
ogen
, ox
ygen
, hy
drog
en,
ozon
e, h
eliu
m,
argo
n, o
r flu
orin
e, e
xcep
t S-
sheU
or
3-sh
ell c
onta
iner
s ra
ted,
for
an a
vera
ge e
vapo
ratio
n lo
ss o
f ov
er S
per
cent
per
Si-h
our
perio
d. (
3)2
*
No.
FIN
P 1
TV
WX
YZ
500
100
A E
-8
6922
2 O
ther
liq
uefie
d ga
s co
ntai
ners
, al
umin
um,
jack
eted
on
ly:
(a)
desi
gned
to'
mai
nta
in t
empe
ra
ture
bel
ow m
inus
130
’ C
. (m
inus
202
° F
.), o
r (b
) 50
0 ga
llon-
capa
city
or .
over
: (4
) **
No.
FIN
P 4
'T
VW
XY
Z50
050
0E
-8
6922
2 O
ther
gas
sh
ippi
ng c
onta
iner
s, a
lum
inum
, }
fille
d or
unf
illed
. (5
)25
No.
NO
NF
8W
XY
Z10
0B
6922
2 O
ther
sh
ippi
ng
cont
aine
rs,
alum
inum
, in
cl
udin
g ba
rrel
s, b
oxes
, che
sts
and
colla
psib
le tu
bes.
(2
,6 a
nd 7
)“
FIN
P 8
XY
Z10
0B
6923
1 Li
quef
ied
gais
cyl
inde
rs, f
illed
or u
nfill
ed, i
ron
or s
teel
, jac
kete
d on
ly;
(a)
250
to 5
00 g
allo
n ca
pa
city
, des
igne
d fo
r liq
uid
fluor
ine,
or
(b)
500
gal
lon
capa
city
or
over
, de
sign
ed f
or li
quid
nit
roge
n,
oxyg
en, h
ydro
gen,
ozo
ne, h
eliu
m, a
rgon
, or f
luor
ine,
ex
cept
S-s
heU
or
3-sh
ell
cont
aine
rs r
ated
for
an
aver
age
evap
orat
ion
loss
of
over
5 p
erce
nt p
er S
i-
hour
peri
od.
(I)2
5
No.
FIN
P 1
TV
WX
YZ
500
100
A E
-8
6923
1 O
ther
.liqu
efie
d ga
s cy
linde
rs,
fille
d or
un
fille
d, i
ron
or
stee
l, ja
cket
ed o
nly
: (a
) de
sign
ed
to m
aint
ain
'tem
pera
ture
s be
low
min
us 1
30°
C.
(min
us 2
02°
F.)
, or
(b
) 60
0 ga
llon
cap
acit
y or
ov
er.
(2)2
*
No,
FIN
P 4
TV
WX
YZ
500
500
E-8
6923
1 O
ther
com
pres
sed
gas
cylin
ders
, fill
ed o
r un
-N
o.S
TE
E 8
WX
YZ
'10
0B
6923
2 Li
quef
ied
gas
cylin
ders
, fil
led
or u
nfill
ed,
alum
inum
, ja
cket
ed o
nly
: (a
) 25
0 to
500
gal
lon
capa
city
, de
sign
ed
for
the
hand
ling
of
liqui
d flu
orin
e, o
r (b
) 50
0 ga
llon
capa
city
or
over
, de
si
gned
fo
r liq
uid
n
itro
gen,
ox
ygen
, hy
drog
en,
ozon
e, h
eliu
m,
argo
n, o
r flu
orin
e, e
xcep
t S-
sheU
or
S-sh
eU. c
onta
iner
s ra
ted
for
an a
vera
ge e
vapo
ratio
n lo
ss o
f ov
er S
per
cent
per
Si-h
our
perio
d. (
I)25
No.
FIN
P 1
TV
WX
YZ
500.
100
A E
-8
6923
2 O
ther
liq
uefie
d ga
s cy
linde
rs,
fille
d or
un
fille
d, a
lum
inum
, ja
cket
ed o
nly
: (a
) de
sign
ed t
o m
aint
ain
tem
pera
ture
s be
low
min
us 1
30°
C.
(min
us
202°
F.)
, or
(b
) 50
0 ga
llon
capa
city
or
over
. (2
)25
No.
FIN
P 4
TV
WX
YZ
500
500
E-8
FEDE
RAL
REGI
STER
, VO
L. 31
,
Dep
artm
ent
of
Com
mer
ce
Exp
ort
Con
trol
Com
mod
ity
Nu
mbe
r an
dC
omm
odit
y D
escr
ipti
onU
nit
Proc
essi
ng
Cod
e an
d R
elat
ed
Com
mod
ity
Gro
up
No.
Val
idat
ed
Lice
nse
Req
uir
ed fo
r C
oun
try
Gro
ups
Show
n B
elow
GL
V $
Val
ue
Lim
its
for
Sh
ipm
ent t
o C
oun
try
Gro
ups
Spec
ial
Prov
isio
n*
Lis
tT
1V
X
6923
2 O
ther
com
pres
sed,
gas
cylin
ders
of a
lum
inum
. (3
)2»
No.
FIN
P 8
WX
YZ
-—
100
B
6929
9 O
ther
gas
sh
ippi
ng c
onta
iner
s w
hich
ar
e in
stru
men
ts o
f in
tern
atio
nal
trad
e, f
illed
or
un
fille
d, a
ll m
etal
.1*
FIN
P 8
WX
YZ
——
100
B
6931
1 W
ire
cabl
e, r
ope,
str
and,
and
cor
d, s
tain
less
st
eel,
suita
ble
for
airc
raft
. (1
)*Lb
.S
TE
E 8
WX
YZ
——
100
B
6931
2 O
ther
wir
e ca
ble,
rop
e, p
laite
d ba
nds,
slin
gs
and
sim
ilar
arti
cles
, of
cop
per
or c
oppe
r al
loy.
(2
)2*
Lb.
NO
NF
10
TV
WX
YZ
100
100
—
6933
1 Fe
nce
gate
s, w
ire
clot
h, a
nd o
ther
wov
en
wir
e pr
oduc
ts,
iron
or
stee
l. (2
)sSq
. ft.
ST
EE
8Y
Z—
——
B
6933
3 Al
umin
um w
ire
fenc
ing,
fen
ce
gate
s,
and
wir
e cl
oth.
(1
and
2) *
Sq. f
t.N
ON
F 8
Z—
—B
6933
3 O
ther
wov
en w
ire
prod
ucts
, al
umin
um.
(1
and
2)*
Sq. f
t.F
INP
8X
YZ
——
100
B
6951
0 H
and
tool
s m
ainl
y us
ed
in a
gric
ult
ure
or
fore
stry
, an
d pa
rts,
n.e
.c.,
as f
ollo
ws:
can
t ho
oks;
di
ggin
g ba
rs;
digg
ing
spud
s; g
arde
ners
’ tr
owel
s;
mat
tock
s; p
icks
; pi
ke p
oles
; an
d w
heel
-typ
e cu
lti
vato
rs;
and
whe
el-t
ype
seed
ers.
(I)
2
FIN
P 8
YZ
B
6951
0 O
ther
han
d to
ols
of a
kin
d m
ainl
y us
ed i
n ag
ricu
ltur
e or
fore
stry
, an
d pa
rts,
’n.e
.c.
(2)2
FIN
P 8
Z—
——
B
6952
1 Sa
w b
lade
s, w
oodw
orki
ng.
(1)J
......
......
....
No.
FIN
P 8
XY
Z—
100
B69
521
Oth
er h
and-
oper
ated
saw
s, h
and
saw
fram
es
and
blad
es, a
nd p
arts
, n.e
.c.
(4)2
FIN
P 8
YZ
——
—B
6952
2 'M
etal
-cu
ttin
g sh
ears
and
tin
men
’s s
nips
, not
po
wer
-ope
rate
d;
wre
nche
s;
plie
rs,
pinc
ers
and
othe
r si
mila
r han
d to
ols,
and
par
ts, n
.e.c
.; an
d fil
es,
rasp
s, a
nd f
ile a
cces
sori
es,
exce
pt f
ile b
lank
s. (
3)2
FIN
P 8
YZ
B
6952
3 D
iam
ond
dres
sers
, an
d pa
rts,
n.e
.c.
(!}*
69
523
Han
d to
ols
and
part
s,
n.e.
c.,
as
follo
ws:
ot
her
tool
s in
corp
orat
ing
indu
stri
al d
iam
onds
; di
est
ocks
; pi
pe t
hrea
ding
too
ls;
tapp
ing
tool
s;
tap
guid
es,
mag
netic
; fil
ing
bloc
ks,
nonf
erro
us m
eta
l;
-and
sho
e la
sts.
(2)
269
523
Coo
king
and
kitc
hen
tool
s an
d pa
rts;
and
ed
ge t
ools
and
par
ts,
exce
pt c
hise
l bl
anks
, ch
isel
s,
Go-
Dev
ils ®
, m
etal
sc
rape
rs,
nut
split
ters
, an
d w
edge
s. (
3)2
FIN
P 8
F
INP
8
FIN
P 8
WX
YZ
XY
Z Z—
—
100
wB B B
FIN
P 8
YZ
t -r
--B
6952
3 R
emin
gton
in
dust
rial
gu
ns,
and
part
s,
n.e.
c.“■
32C
ON
S 8
XY
Z—
—19
0B
6952
4 R
otar
y ro
ck d
rill
bits
, in
clud
ing
cori
ng b
its,
havi
ng c
ones
or
sect
ions
whi
ch r
otat
e fr
eely
and
in
depe
nden
tly o
f th
e ro
tatio
n of
the
bod
y of
the
bi
t. (1
1)«
*
No.
CO
NS
2V
WX
YZ
1,00
0>3
5-12
6952
4 Pa
rts,
n.e
.c.,
spec
ially
des
igne
d fo
r ro
tary
ro
ck d
rill
bits
, in
clud
ing
cori
ng b
its,
hav
ing
cone
s or
sec
tions
whi
ch r
otat
e fr
eely
and
ind
epen
dent
ly
of t
he r
otat
ion
of t
he b
ody
of t
he b
it. (
13)*
*,
CO
NS
2V
WX
YZ
1,06
0£-
12
93—
FRID
AY,
MAY
13,
196
6
7048 RULES AND REGULATIONS
HH
HH
HH
HH
iì
bm
hm
i
Dep
artm
ent
of
Com
mer
ce
Exp
ort
Con
trol
Com
mod
ity
Nu
mbe
? an
dV
eit
Proc
essi
ng
Cod
e an
d R
elat
ed
Com
mod
ity
Gro
up
No*
Val
idat
ed
Lice
nse
R
equ
ired
for
Cou
ntr
y G
roup
s Sh
own
Bel
ow
GL
V $
Val
ue
Lim
ita
for
Sh
ipm
ent t
o C
oun
try
Gro
upa
8pec
ia!
3 rev
isio
ns
Lis
tC
omm
odit
y D
escr
ipti
onT
j
V
1X
6952
4 O
ther
rot
ary
drill
bits
, cor
e bi
ts, a
nd r
eam
ers
n.e.
c.,
and
part
s, n
.e.c
. (1
2 an
d 14
)T...
......
CO
NS
8X
YZ—
—10
0B
6972
1 D
omes
tic,
incl
udin
g co
mm
erci
al a
nd h
ospi
ta
l, ut
ensi
ls a
nd h
ollo
w w
are
of i
ron
or s
teel
, in
cl
udin
g vi
treo
us-e
nam
eled
or
copp
er-c
lad.
(1
)*
Lb.
FIN
P S
ZB
6979
4 Fi
gure
s, f
low
er r
acks
, an
d m
irro
rs,
of n
on-
ferr
ous
met
als,
(1
,2 a
nd 3
) -s
FIN
P 8
XYZ
100
B
6979
4 Fi
gure
s, f
low
er r
acks
, an
d m
inor
s, o
f ir
on
or s
teel
; tr
ays
and
phot
ogra
ph o
r pi
ctur
e fr
ames
of
all
met
als,
n.e
.c.-
(1,2
and
8)M
> **
FIN
P 8
YZB
6979
4 O
ther
indo
or o
rnam
ents
of b
ase
met
als,
me.
e.
[Rep
ort
pict
ure
fram
es,
mir
rors
and
ind
oor
orna
m
ents
of
prec
ious
met
als
in E
xpor
t C
ontr
ol C
om
mod
ity N
o. 7
9715
.) (1
, 2 a
nd 3
)>'-
34
FIN
P 8
ZB
6988
2 Fl
exib
le t
ubin
g an
d pi
ping
, no
nfer
rous
me
tal.
(2)»
Lb.
FIN
P 8
XY.Z
**•
loo
B
6988
7 O
ther
wel
din
g an
d so
lder
ing
rods
and
wir
e,
incl
udin
g tu
bes
and
plat
es f
or w
eldi
ng o
r so
lder
in
g. (
3,15
and
16)
169
887
Cop
per
or c
oppe
r al
loy
wel
din
g an
d so
lder
in
g ro
ds a
nd w
ire,
inc
ludi
ng t
ubes
and
pla
tes
for
wel
din
g an
d so
lder
ing.
(14
and
16)
»*
Lb.
Lb.
ST
EE
8
NO
NF
10
XYZ
TVW
XYZ
100
100
100
B
6989
1 Li
quef
ied
gas
cont
aine
rs,
iron
or
st
eel,
jack
eted
onl
y, d
esig
ned
to m
aint
ain
tem
pera
ture
s be
low
min
us 1
30*
C.
(min
us 2
02°
F.)
a
044*
**F
INP
4TV
WX
YZ50
050
0E
-8
6989
2 Li
quef
ied
gas
cont
aine
rs,
copp
er o
r co
pper
al
loy,
jack
eted
onl
y, d
esig
ned
to m
aint
ain
tem
pera
tu
res
belo
w m
inus
130
° C.
(m
inus
202
° F
.).
(1)»
****
**F
INP
4TV
WX
YZ50
0lo
oE
-8
6989
2 O
ther
ga
s sh
ippi
ng c
onta
iner
s,
copp
er
or
copp
er a
lloy.
[R
epor
t co
ntai
ners
, cop
per
or c
oppe
r al
loy,
wit
h a
cap
acity
of
80 g
allo
ns o
r m
ore
in E
xpo
rt C
ontr
ol C
omm
odity
No.
692
12.]1
4
FIN
P 8
WX
YZ10
0B
6989
2 A
rtic
les
of c
oppe
r or
cop
per a
lloy,
the
follo
w
ing
only
: an
imal
cag
es;
bird
ca
ges;
* bo
oken
ds;
bott
le c
arri
ers;
bu
ll ri
ngs
; ca
n to
p sp
outs
; ea
r m
uff
fram
es; g
uy
wir
e cl
amps
, exc
ept c
oppe
r allo
y;
hand
bags
; ho
se
coup
lings
, ex
cept
co
pper
allo
y;
radi
ator
fill
ing
cans
; m
ouse
tra
ps a
nd r
at t
raps
, ex
cept
cop
per
allo
y; t
ote
boxe
s; w
aste
pap
er b
as
kets
; w
eath
erst
ripp
ing;
and
wir
e ro
pe c
lam
ps, e
xce
pt c
oppe
r allo
y. (
5 an
d 6}
*<*<
**
FIN
P 8
ZB
FEDE
RAL
REGI
STER
, VO
L. 3
1,
■■■■
■■I
Dep
artm
ent o
f Com
mer
ce
Exp
ort C
ontr
ol C
omm
odit
y N
um
ber
,Vnf
tPr
oces
sin
g C
ode
and
Rel
ated
C
omm
odit
y G
roup
No.
Val
idat
ed
Lice
nse
R
equ
ired
for
C
ount
ry G
rou
ps
Sh
own
Bel
ow
GL
V $
Val
ue
Lim
its
for
Sh
ipm
ent t
o C
oun
try
Gro
upa
Spe
cial
Prov
ision
sL
ist
Com
mod
ity
Des
crip
tion
T
1*
1
X
6989
2 A
rtic
les
of c
oppe
r or
copp
er a
lloy,
the
follo
w
ing
only
: an
chor
s fo
r m
arin
e us
e; b
ead
chai
ns;
brac
kets
, fo
r m
ount
ing
outb
oard
mot
ors;
bul
letin
bo
ards
; ca
sket
s’; c
loth
es-li
nes
(dry
er)
reel
s; f
og
horn
s, n
onel
ectr
ic, f
or s
hips
; gu
tter
trou
ghs;
hin
ge
chap
lets
; ho
se s
wiv
els,
exc
ept
copp
er a
lloy;
lid
s fo
r bo
xes;
moo
ring
sw
ivel
s; b
arlo
cks;
pip
e sa
ddle
s,
exce
pt c
oppe
r al
loy;
too
l bo
xes
and
tool
che
sts,
em
pty;
and
uti
lity
boxe
s. (
5 an
d 6
):l®>
**
FIN
P 8
YZ
B
6989
2 O
ther
art
icle
s of
cop
per
or c
oppe
r al
loy,
n.
e.c.
(5
an
d6
)so
......
..F
INP
8X
YZ
«**•
100
B
6989
9 C
astin
gs
and
forg
ings
o
f th
e fo
llow
ing
met
aTs
or t
hei
r al
loys
: an
timon
y, c
hrom
ium
, le
ad,
man
gane
se,
tin,
or
zinc
. (6
, 13
, 21
, 24
, 30
and
3
6)»
.'»
Lb.
NO
NF
8Z
B
6989
9 O
ther
non
ferr
ous
met
al c
astin
gs a
nd f
org
ings
, n.
e.c.
[R
epor
t co
pper
and
cop
per
base
allo
y ca
stin
gs
and
forg
ings
in
E
xpor
t C
ontr
ol
Com
m
odit
y N
o. 6
9892
.] (1
1 an
d 3
9)»
.10
Lb.
MIN
L 8
YZ
B
6989
9 M
ater
ials
spe
cial
ly d
esig
ned
and
man
ufac
tu
red
for
use
as
abso
rber
s of
el
ectr
omag
netic
w
aves
hav
ing
freq
uenc
ies
grea
ter
than
200
meg
acy
cles
per
sec
ond.
(50
) >*
Lb.
ELM
E 1
TV
WX
YZ
500
500
A.
6989
9 A
rtic
les
of n
onfe
rrou
s m
etal
s, o
ther
tha
n co
pper
or
copp
er a
lloys
, th
e fo
llow
ing
only
: bo
lts,
scre
ws,
riv
ets,
was
hers
and
sim
ilar
artic
les,
ex
cept
scr
ew,
eyes
an
d sc
rew
hoo
ks;
brac
kets
for
m
ount
ing
outb
oard
mot
ors;
bul
letin
boa
rds;
cas
ke
ts;
clot
hes-
line
(dry
er)
reel
s;' f
og h
orns
, no
nel
ectr
ic,,
for
ship
s; h
inge
cha
plet
s; l
ids
for
boxe
s;
link
chai
ns;
moo
ring
sw
ivel
s;
oarl
ocks
; pi
pe
hang
ers;
ri
dge
tile
; to
ol*
boxe
s an
d to
ol c
hest
s,
empt
y; a
nd u
tilit
y bo
xes.
(42
, 48,
51, 5
2,53
, 54
, 55
and
56
)»».
"
FIN
P 8
YZ
B
6989
9 A
rtic
les
of n
onfe
rrou
s m
etal
s, o
ther
tha
n co
pper
or
copp
er a
lloys
, th
e fo
llow
ing
only
: ani
mal
be
lls;
anim
al
cage
s;
anim
al
trap
s;
ballb
eari
ng
swiv
els;
bir
d ca
ges;
bic
ycle
cha
ins;
boo
kend
s; b
ot
tle
carr
iers
; bu
ll ri
ngs
; ca
ll be
lls;
can
top
spou
ts;
catc
hes,
exc
ept
build
ers’
and
for
fir
earm
s; c
hang
e ca
rrie
rs;
clam
ps fo
r ca
ble,
gu
y w
ire
and
wir
e ro
pe;
colla
psib
le tu
bes,
lead
or
tin
; de
sk b
ells
; dis
pens
ers,
liq
uid
soa
p; d
omes
tic u
tens
ils,
incl
udin
g co
okw
are
and
hollo
w w
are;
ear
muf
f fr
ames
; fly
box
es o
r ta
ckle
box
es;
gaso
line
cans
; ke
ys f
or s
hoe
polis
h ca
ns;
law
n ed
gin
g;
mat
ch
boxe
s, t
in,
plai
n or
pa
inte
d; m
op w
rin
gers
; nai
ls, t
acks
, sta
ples
, spi
kes
and
sim
ilar
artic
les,
exc
ept b
out s
pike
s, w
ire
nails
, w
ire
stap
les
and
wire
spi
kes;
oin
tmen
t ca
ns;
ra
diat
or f
illin
g ca
ns;’
rat
trap
s;''s
crew
eye
s; s
crew
*
FÌN
P 8
‘Z
8
. 93
—FR
IDAY
, M
AY 1
3, 1
966
RULES AND REGULATIONS 7049
Dep
artm
ent
of
Com
mer
ce
Exp
ort
Con
trol
Com
mod
ity
Nu
mbe
r an
dC
omm
odit
y D
escr
ipti
onU
nit
Proc
essi
no:
Cod
e en
d R
elat
ed
Com
mod
ity
Cro
up
No.
hook
s; s
hack
les;
soc
ket
clev
ises
; su
it c
ases
; to
te
boxe
s; t
urn
buck
les;
Ven
etia
n bl
inds
, ex
cept
Ven
etia
n sc
reen
ing;
w
aste
, pa
per
ba
sket
s;
wea
ther
st
rip
pin
g; a
nd
wir
e in
sert
s, h
elic
ally
coi
led,
(4
2,48
,51,
52,5
3,54
, 55
and
56)
*»- «
° '*9
899
Oth
er a
rtic
les
of n
onfe
rrou
s m
etal
s, n
.e.c
. ..
....
(42,
48,5
1,62
,53,
54,5
5 an
d 56
) ».
«F
JNP
8
MA
CH
INE
RY,
OTH
ER
TH
AN
ELE
CTR
IC
7111
0 B
oile
r tu
bes,
car
bon
stee
l. (3
)42
*711
20
Con
dens
er tu
bes,
car
bon
stee
l. (5
)4*
7125
0 W
hee
l tr
acto
rs,
unde
r 12
5 po
wer
ta
keof
f h
orse
pow
er;
and
gard
en t
ract
ors,
incl
udin
g m
otor
ti
llers
. (2
)*71
250
Oth
er
non
mili
tary
tr
acto
rs.
(Spe
cify
as
n
onm
ilita
ry a
nd h
orse
pow
er.)
(5 a
nd 8
)171
410
'Vid
eoty
pers
.®1*
..
......
......
......
......
......
......
7141
0 M
ult
ityp
e ty
pew
rite
rs;
and
auto
mat
ic t
yp
ing
devi
ces
wit
h p
unch
ed t
ape
mec
hani
sms
(for
ex
ampl
e,.J
ust
owri
ters
®).
(2)*
*71
492
Part
s an
d ac
cess
orie
s fo
r th
e fo
llow
ing
mac
hine
s:
mul
tity
pe t
ypew
rite
rs;
auto
mat
ic t
yp
ing
devi
ces
wit
h p
unch
ed t
ape
mec
hani
sms
(fo
r ex
ampl
e, J
ust
owri
ters
),® li
stin
g-ad
ding
mac
hine
s;
and
phot
o co
mpo
sing
mac
hine
s (f
or
exam
ple,
Cox
- he
adlin
ers,
® H
eadl
iner
s,®
and
Typ
ros®
). (5
)44
7151
0 M
etal
cutt
ing
mac
hine
too
ls a
nd o
ther
ma
chin
e to
ols
for
wor
kin
g m
etal
s, s
peci
ally
des
igne
d fo
r th
e m
anuf
actu
re
of
arm
s,
mun
ition
s,
and
impl
emen
ts o
f w
ar.
(Spe
cify
typ
e of
mac
hine
.) (3
8 an
d 42
) «71
510
Gea
r m
akin
g an
d/or
fini
shin
g m
achi
nes,
as
follo
ws:
(a
) ge
ar g
rin
din
g m
achi
nes,
gen
erat
ing
type
, of
36
inch
es w
ork
diam
eter
or
mor
e, o
r (b
) m
achi
nes
capa
ble
of t
he
prod
uctio
n of
gea
rs o
f a
mod
ule
finer
tha
n 0.
5 m
m.
(dia
met
ral
pitc
h fin
er
than
48
). (S
ee
§ 39
9.2,
In
terp
reta
tion
3.)
(6th
roug
h 10
, and
44)
2171
510
Mac
hine
s sp
ecia
lly d
esig
ned fo
r mak
ing
gas
turb
ine
blad
es,
incl
udin
g bu
t- n
ot l
imite
d to
the
fo
llow
ing:
bl
ade
belt
gri
ndi
ng
mac
hine
s, b
lade
ed
ge r
adiu
sing
mac
hine
s, b
lade
aer
ofoi
l m
illin
g an
d/or
gri
ndi
ng
mac
hine
s, b
lade
fill
et r
adiu
sing
an
d/or
pl
atfo
rm
form
ing
mac
hine
s,
blad
e ro
ot
mill
ing
mac
hine
s,
blad
e bl
ank
pref
orm
ing
ma
chin
es, b
lade
rol
ling
mac
hine
s, b
lade
aer
ofoi
l sha
pin
g m
achi
nes,
bla
de r
oot
grin
din
g m
achi
nes,
and
bl
ade
aero
foil
scri
bing
mac
hine
s.
(13
and
84)7
No.
No. No
.N
o. No.
No. No.
CO
NS
8 C
ON
S 8
AG
SU
8
CO
NS
8
FIN
P 8
F
INP
8
FIN
P 8
TOO
L 1
TOO
L 1
TOO
L 1
Val
idat
ed
Lice
nse
R
equ
ired
for
Cou
ntr
y G
roup
s S
how
n B
elow
GL
V $
Val
ue
Lim
ita
for
Sh
ipm
ent t
o C
oun
try
Gro
upa
Spac
ial
Prov
isio
ns
Lis
t
XYZ Z Z YZ
XY
Z
XY
ZY
Z YZ
TV
WX
YZ
TV
WX
YZ
TV
WX
YZ
500
500
500
100
100
100 —
B
500
500
500
FEDE
RAL
REGI
STER
, VO
L. 31
W W W WWW
Dep
artm
ent
of
Com
mer
ce
Exp
ort
Con
trol
Com
mod
ity
Nu
mbe
r sn
dC
omm
odit
y D
escr
ipti
on
7151
0 M
achi
nes
spec
ially
des
igne
d fo
r th
e m
anu
fact
ure
of
jet
engi
nes,
as
follo
ws:
(a
) je
t en
gine
co
mpr
esso
r ca
se b
orin
g m
achi
nes,
(b
) je
t en
gine
co
mpr
esso
r or
tur
bine
dis
c tu
rnin
g m
achi
nes,
and
(c
) je
t en
gine
rot
or g
rind
ers.
(1
2, 2
5 an
d 2
6)7
71
510
Lath
es
spec
ially
de
sign
ed
for
the
man
ufa
ctu
re o
f ar
tille
ry,
incl
udin
g, b
ut n
ot l
imite
d to
, gu
n ba
rrel
tre
pann
ing
lath
es,
gun-
bori
ng l
athe
s,
and
gun
jum
p sc
rew
lat
hes.
(2
0, 2
1, 2
2 an
d 23
)47
7151
0 M
achi
nes
spec
ially
de
sign
ed
for
(a)
the
wor
kin
g or
for
min
g of
air
craf
t sh
eet,
plat
e or
ex
trus
ion,
or
(b)
the
mill
ing
of a
ircr
aft
skin
. (2
9 an
d 43
)771
510
Spin
-for
min
g m
achi
nes
wit
h d
rive
mot
ors
of 5
0 ho
rsep
ower
or
over
. (4
5 th
roug
h 49
) 7> *
*• 80
71
510
Spin
-for
min
g m
achi
nes
wit
h
driv
e m
otor
s o
f ov
er 2
5 ho
rsep
ower
up
to b
ut n
ot i
nclu
ding
50
hor
sepo
wer
. (4
5 th
roug
h 4
9)7
-**.
*"
7151
0 B
ondi
ng
mac
hine
s fo
r ap
plyi
ng
fins
on
tubi
ng.’
°>14
7151
0 A
xle
stra
ight
ener
s.1*
......
......
.....
7151
0. O
ther
met
al-c
uttin
g m
achi
ne t
ools
and
oth
er
mac
hine
too
ls f
or w
orki
ng
met
als,
(4
1 an
d 59
)7 71
521
Ingo
t m
olds
for
hea
vy s
teel
ing
ots.
(4
)“,.
71
715
Dry
set
vacu
um
syst
ems,
®
and
part
s an
d at
tach
men
ts (
5) 4
*71
715
Text
ile
cutt
ing
mac
hine
s,
and
part
s an
d at
tach
men
ts, n
.e.c
.40
7171
5 O
ther
co
mm
eric
al
and
hous
ehol
d la
undr
y an
d’ d
rycl
eani
ng m
achi
nes,
and
par
ts a
nd a
ttac
hm
ents
, n.e
.c.
(7)7
7181
2 Pa
per
cutt
ers,
offi
ce t
ype.
(I
)“-4
7....
......
.....
7181
2 Fi
lm s
litte
rs;
and
part
s, n
.e.c
. (1
)*-
47...
.....
7181
2 O
ther
pap
ercu
ttin
g m
achi
nes,
and
mac
hine
s,
n.e.
c.,
for
the
man
ufac
ture
of
arti
cles
of
pape
r pu
lp,
pape
r or
pap
erbo
ard;
and
par
ts a
nd a
ttac
hm
ents
, n.e
.c.
(I)4
7-48
7182
2 Fo
nts;
han
dsaw
s; L
inot
ype®
mat
rice
s; a
nd
mu
ltit
ype
type
wri
ters
(fo
r ex
ampl
e, V
arit
yper
s®);
and
part
s an
d ac
cess
orie
s th
eref
or.
(2)4
4 71
842
Part
s, a
cces
sori
es, a
nd a
ttac
hmen
ts s
peci
ally
de
sign
ed f
or c
onst
ruct
ion
equi
pmen
t bu
ilt t
o m
ili
tary
spe
cific
atio
ns;
and
atta
chm
ents
spe
cial
ly d
esi
gned
fo
r m
ilita
ry t
ype
inte
gral
tr
acto
r-sh
ovel
lo
ader
s.
(Sp
ecify
as
mili
tary
.) (R
epor
t in
tegr
al
trac
tor-
shov
el
load
ers
in
Exp
ort
Con
trol
C
om
mod
ity
No.
719
31.)
(4)4
071
842
Atta
chm
ents
spe
cial
ly d
esig
ned
for
nonm
ili
tary
typ
e in
tegr
al t
ract
or-s
hove
l lo
ader
s of
135
.h
orse
pow
er a
nd
over
. [R
epor
t in
tegr
al t
ract
or-
shov
el l
oade
rs i
n E
xpor
t C
ontr
ol C
omm
odity
No.
71
931.
]».4
0
Uni
tPr
oces
sin
e C
ode
and
Rel
ated
C
omm
odit
y G
rou
p N
o.
Val
idat
ed
Liee
nse
R
equ
ired
for
Cou
ntry
Gro
ups
Sh
own
Bel
ow
GL
V $
Val
ue
Lim
ita
for
Sh
ipm
ent t
o C
oun
try
Gro
ups
8pec
isl’re
vision
sLi
stT
v
jX
No.
TOO
L 1
TV
WX
YZ
/50
050
01—
A
No.
TOO
L 1
TV
WX
YZ
500
500
—A
No.
TOO
L 1
TV
WX
YZ
600
600
—A
No.
TOO
L 1
.T
VW
XY
Z50
050
0—
A
No.
TO
OL
2T
VW
XY
Z50
050
0—
A
No.
TOO
L 8
XY
Z—
—10
0B
No.
TR
AN
8X
YZ
100
BN
o.TO
OL
8W
XY
Z—
—10
0B
Lb.
TOO
L 8
Z—
—_
BG
IEQ
8X
YZ
——
100
B
GIE
Q 8
YZ
——
—B
FIN
P 8
Z—
——
B
FIN
P 8
zB
••••
••G
IEQ
8X
YZ
——
100
BG
IEQ
8Y
ZB
FIN
P 8
YZ
B
CO
NS
1T
VW
XY
Z50
0—
-A
CO
NS
2V
WX
YZ
—1,
000
-E
-ll
93—
FRID
AY,
MAY
13,
196
6
7050 RULES AND REGULATIONS
a*
Dep
artm
ent
of
Com
mer
ce
Exp
ort
Con
trol
Com
mod
ity
Nu
mbe
r an
dC
omm
odit
y D
escr
ipti
onU
nit
Proc
essi
ng
Cod
e an
d R
elat
ed
Val
idat
ed
Lice
nse
R
equi
red
for
Cou
ntr
y G
rou
p«
Sh
own
Bel
ow
GL
V $
Val
ue
Lim
its
for
Sh
ipm
ent t
o C
oun
try
Gro
upa
Spe
cial
Prec
isio
ns
Gro
up
No.
T'
VX
7185
1 B
riqu
ettin
g: p
ress
es,
and
othe
r br
ick,
tile
, ho
useh
old
cera
mic
, an
d co
ncre
te p
rodu
cts
man
ufa
ctu
rin
g m
achi
nes,
n.e
.c.;
and
part
s, n
.e.c
. ,(4
and
5
)»
CO
NS
8z
——
B
7185
2 O
ther
gla
ss w
orki
ng
mac
hine
ry,
n.e.
c.;
and
mac
hine
s fo
r as
sem
blin
g el
ectr
ic f
ilam
ent
and
dis
char
ge l
amps
; an
d pa
rts,
n.e
.c.
(4)2
G1E
Q 8
XY
Zlo
oB
1
7191
4 N
on-e
lect
ric
indu
stri
al f
urna
ces
or h
eate
rs
of
the
follo
win
g ty
pes:
(a
) cy
lindr
ical
hav
ing
a su
spen
ded
defle
ctin
g co
ne,
(b)
radi
ant
wal
l em
pl
oyin
g m
ultip
le i
ndep
ende
ntly
con
trol
led
cera
mic
cu
p bu
rner
s, o
r (c
) m
etal
hea
t tr
eati
ng;
and
spe
ci
ally
des
igne
d pa
rts
and
atta
chm
ents
. (2
and
S)T
CO
NS
8W
XY
Z10
0B
7191
4 O
ther
non
-ele
ctri
c fu
rnac
es, o
vens
and
kiln
s;
and
part
s an
d at
tach
men
ts.
(5 a
nd 6
)10
CO
NS
8X
YZ
——
100
B
7191
5 W
alk-
in c
oole
rs;
and
air
cond
ition
ers
for
non
-mili
taiy
au
tom
obile
s,
truc
ks,
buss
es,
and
trai
lers
; and
par
ts.
(5 a
nd 7
)T
GIE
Q 8
yz
—
~
—*
B
7191
5 Ic
e-m
akin
g m
achi
nes;
so
da
foun
tain
an
d be
er d
ispe
nsin
g eq
uipm
ent;
com
mer
cial
typ
e re
fr
iger
ator
s an
d fr
eeze
rs,
exce
pt w
alk-
in c
oole
r»,
bloo
d, b
one,
and
tis
sue
bank
fre
ezer
s, a
nd e
quip
m
ent
capa
ble
of m
aint
aini
ng t
empe
ratu
res
belo
w
min
us IS
O*
C.;
and
unit
cool
ers
and
prod
uct
cool
er
s, w
ith
fan
s, f
or r
efri
gera
tion
; an
d pa
rts
ther
efo
r, e
xcep
t com
pres
sors
and
con
dens
ing
units
(co
m
pres
sor w
ith c
onde
nser
), (6
) T
GIE
Q 8
zB
7191
5 O
ther
ai
rcon
ditio
ning
an
d re
frig
erat
ing
equ
ipm
ent;
and
par
ts,
n.e.
c.,
incl
udin
g pa
rts
for
self-
cont
aine
d ai
r-co
nditi
onin
g m
achi
nes.
(4
, 8,
a
nd
9)T
7191
9 C
ane
and
map
le
siru
p ev
apor
ator
s;
crop
dr
yers
; fo
rage
deh
ydra
tors
; an
d to
bacc
o cu
rers
; an
d pa
rts
(6)8
-84
GIE
Q 8
AG
SU
8
XY
Z
YZ
—-
100
B B
7191
9 Su
gar
mill
mac
hine
s fo
r pr
oces
sing
by
mea
ns
ef
a ch
ange
in
tem
pera
ture
(fo
r ex
ampl
e, d
rier
s,
evap
orat
ors,
su
gar
extr
actio
n ca
lori
zato
rs,
and
carb
onat
ion
vats
); an
d pa
rts.
(6
)84«
81
GIE
Q 8
YZ
B
7191
9 C
oolin
g to
wer
s an
d co
olin
g po
nd u
nits
; an
d ve
geta
ble
oil
mac
hine
s, p
ulp
and
pape
r m
ill m
ach
ines
, ru
bber
pro
cess
ing
mac
hine
s, a
nd t
obac
co
proc
essi
ng m
achi
nes
for
proc
essi
ng b
y m
eans
of
a c
hang
e in
tem
pera
ture
; an
d pa
rts,
n.e
.c.
(5,1
0,
20,2
1 an
d 23
) »*.
82
GIE
Q 8
YZ
B
7191
9 O
ther
mac
hine
s an
d eq
uipm
ent,
othe
r th
an
dom
estic
, fo
r pr
oces
sing
mat
eria
ls b
y m
eans
of
a c
hang
e in
tem
pera
ture
; and
par
ts,
n.e.
c. (
5,10
, 20
,21,
and
23)
82
•
GIE
Q 8
XY
Z10
0B
7191
9 A
sph
alt
hea
tin
g ke
ttle
s;
and
bitu
min
ous
beat
ers;
and
par
ts, n
.e,c
. (2
2)*
CO
NS
8Z
B
FEDE
RAL
REGI
STER
, VO
L 31
,
Dep
artm
ent
of C
omm
erce
E
xpor
t C
ontr
ol C
omm
odit
y N
um
ber
Un
it
Proc
essi
ng
Cod
e en
d R
elat
ed
Com
mod
ity
Gro
up
No.
Val
idat
ed
Lice
nse
Req
uir
ed fo
r C
oun
try
Gro
ups
Show
n B
elow
GL
V $
Val
ue
Lim
its
for
Sh
ipm
ent t
o C
oun
try
Gro
ups
.Spe
cial
Prov
isio
nsL
ist
Com
mod
ity
Des
crip
tion
TV
X
7192
2 O
ther
vac
uum
- pum
ps, a
nd p
arts
and
att
ach
men
ts, n
.e.c
. (8
and
13)
TG
IEQ
8X
YZ
-10
0B
7192
2 C
ompr
esso
rs,
refr
iger
atio
n
and
air-
cond
iti
onin
g ty
pe;
and
part
s, a
.e.c
. (2
3 an
d 24
)<®
......
...G
IEQ
8X
YZ
—10
0B
7192
3 E
xtra
ctor
s,
cont
rifu
gal,
coin
-ope
rate
d,
de
sign
ed f
or c
omm
erci
al l
aund
ries
; an
d pa
rts,
n.e
.c.
(10
)2
FIN
P 8
ZB
7192
3 E
xtra
ctor
s, -
cent
rifu
gal,
not
coin
-ope
rate
d,
desi
gned
fo
r C
omm
erci
al
laun
drie
s;
and
part
s,
n.e.
c. (
11
)2
GIE
Q 8
ZB
7192
3 O
ther
cen
trifu
ges,
and
oth
er f
ilter
ing
and
puri
fyin
g m
achi
nes
for
liqui
ds,
air
and
gase
s;
and
part
s, n
.e.c
. (1
3 an
d 14
)18
GIE
Q 8
XY
Z10
0B
7193
1 Pa
rts,
n.e
.c.,
spec
ially
des
igne
d fo
r m
ilita
ry
type
in
tegr
al t
ract
or-s
hove
l lo
ader
s.
(Sp
ecify
as
mili
tary
.) [R
epor
t at
tach
men
ts i
n E
xpor
t C
ontr
ol
Com
mod
ity N
o. 7
1842
.] (4
)T
CO
NS
3T
VW
XY
Z50
0A
7193
1 Pa
rts,
n.e
.c.,
exce
pt c
abs
and
cab
guar
ds
(can
opy
tops
), sp
ecia
lly d
esig
ned
for
nonm
ilita
ry
type
int
egra
l tr
acto
r-sh
ovel
loa
ders
of
135
hors
epo
wer
and
ove
r.
(Spe
cify
as
nonm
ilita
ry, w
heth
er
whe
el o
r tr
ackl
ayin
g ty
pe,
and
hors
epow
er.)
[Re
port
att
achm
ents
in
Exp
ort
Con
trol
Com
mod
ity
No.
718
42.]
(6) ■>
CO
NS
2.V
WX
YZ
i,o
qoE
-41
7193
1 O
verh
ead
hois
ts, p
enda
nt ty
pe;
cask
et lo
wer
in
g de
vice
s; a
nd f
ishi
ng b
oat
win
ches
; an
d pa
rts
and
atta
chm
ents
. (9
)3-1
0
CO
NS
8Z
100
B
7193
1 Au
tom
obile
lif
ts;
and
jack
s fo
r au
tom
otiv
e ve
hicl
es o
r ai
rcra
ft;
and
part
s, n
.e.c
. (1
0)2
TR
AN
8X
YZ
B
7193
1 O
ther
ha
nd-o
pera
ted,
m
echa
nica
l an
d hy
dr
aulic
jac
ks;
and
part
s.
(12
)54
FIN
P 8
YZ
B
7193
1 O
ther
lift
ing,
lo
adin
g, a
nd c
onve
ying
ma
chin
es a
nd e
quip
men
t; an
d pa
rts
and
atta
chm
ents
, n.
e.c.
(3
, 5,
and
15
)1
CO
NS
8X
YZ
100
B
7193
2 O
ther
ind
ustr
ial
truc
ks,
trac
tors
and
por
tab
le e
leva
tors
of
a ki
nd u
sed
for
mov
ing
good
s in
pl
ants
, ra
ilway
sta
tions
and
sim
ilar
inst
alla
tions
; an
d pa
rts,
acc
esso
ries
and
att
achm
ents
, n.
e.c.
(2,
5
and
7)T
CO
NS
8X
YZ
100
B
7195
2 W
ood
prep
arat
ion
equi
pmen
t fo
r th
e pa
per
indu
stry
. (2
)84
GIE
Q 8
YZ
B
7195
2 Sa
wm
ill m
achi
nes
and
equi
pmen
t, an
d ot
her
woo
dwor
king
mac
hine
s,
incl
udin
g m
achi
nes
for
wor
king
cor
k.
(1)*
*
GIE
Q 8
Z
7195
3 Pn
eum
atic
nai
lers
; an
d pn
eum
atic
st
aple
r gu
ns;
and
part
s an
d at
tach
men
ts, n
.e.c
.84F
INP
8Y
Z
7195
3 H
ydra
ulic
vib
rato
rs;
lubr
icat
ing
equi
pmen
t, fo
rce
feed
, pn
eum
atic
; ha
nd-h
eld
chai
n sa
ws,
po
wer
ed,
and
othe
r po
wer
-ope
rate
d no
nele
ctri
c w
oodw
orki
ng h
and.
tool
s; a
nd p
arts
and
att
ach
men
ts.
(3)2
GIE
Q 8
Z
i. 93
—FR
IDAY
, M
AY 1
3, 1
966
RULES AND REGULATIONS 7051
Dep
artm
ent
of C
omm
erce
E
xpor
t C
ontr
ol C
omm
odit
y N
um
ber
and
Uni
tPr
oces
sin
g C
ode
and
Rel
ated
C
omm
odit
y C
roup
No.
Val
idat
ed
Lice
nse
R
equ
ired
for
Cou
ntr
y G
roup
s Sh
own
Bel
ow
GL
V $
Val
ue
Lim
ita
for
Sh
ipm
ent t
o C
oun
try
Gro
upa
8pec
iaf
Prov
isio
n*
Com
mod
ity
Des
crip
tion
T
1V
X
7195
3 O
ther
po
wer
-ope
rate
d no
nele
ctri
c ha
nd
tool
s; a
nd p
arts
and
att
achm
ents
. (4
)7...
......
CO
NS
8X
YZ
——
100
B
7195
4 B
roac
hing
too
ls s
peci
ally
des
igne
d fo
r, t
he
prod
uctio
n of
arm
s, m
uniti
ons
and
impl
emen
ts o
f ■w
ar.
(3)7
*
TOO
L 1
TV
WX
YZ
500
A
7195
4 B
roac
hing
too
ls s
peci
ally
des
igne
d fo
r pr
odu
ctio
n of
jet
en
gine
bl
ades
and
eng
ine
disc
s.
(4)T
0
TOO
L 2
TV
WX
YZ
500
500
7195
4 O
ther
sur
face
-bro
achi
ng t
ools
. (6
)70.
......
.»TO
OL
8"W
XYZ
• --
-—
a10
0B
7195
4 B
arts
, acc
esso
ries
, and
att
achm
ents
spe
cial
ly
desi
gned
for
bom
b no
se a
nd t
ail f
orgi
ng
mac
hine
s.
<8)*
‘
TOO
L 1
TV
WX
YZ
500
A
7195
4 Pa
rts,
acc
esso
ries
, and
att
achm
ents
spe
cial
ly
desi
gned
fo
r ar
tille
ry
mol
ding
an
d ca
stin
g m
ach
ines
, ex
clud
ing
cent
rifu
gal c
astin
g m
achi
nes
for
cast
ing
(1 fe
et l
ong
and
over
with
wal
l th
ickn
ess
of S
inc
hes
and
over
. (1
0)7
*
TOO
L 1
TOO
L 2
TOO
L 2
TV
WX
YZ
TV
WX
YZ
500
500
500
500
A
7195
4 Pa
rts,
acc
esso
ries
, and
att
achm
ents
spe
cial
ly
desi
gned
for
fla
me
cutt
ing
mac
hine
s w
ith t
race
r he
ads
desi
gned
fo
r or
equ
ippe
d w
ith
ele
ctro
nic
clos
ed
loop
co
ntro
l sy
stem
s de
sign
ed
sole
ly f
or
posi
tioni
ng o
pera
tions
. (1
4)7
1
TV
WX
YZ
500
B71
954
Part
s, a
cces
sori
es a
nd a
ttac
hmen
ts f
or b
ond
ing
mac
hine
s fo
r ap
plyi
ng fi
ns o
n tu
bing
.10-
10TO
OL
8X
YZ
100
7195
4 Pa
rts
and
acce
ssor
ies
for
axle
st
raig
ht-
ener
s.’0
TR
AN
8X
YZ
,10
0B
7195
4 Pa
rts,
acc
esso
ries
and
att
achm
ents
for
woo
d pr
epar
atio
n eq
uipm
ent
for
the
pape
r in
dust
ry.00
GIE
Q 8
YZ
*B
7195
4 Pa
rts,
acc
esso
ries
and
att
achm
ents
for
saw
m
ill m
achi
nes
and
equi
pmen
t; an
d ot
her
woo
d-
'wor
king
mac
hine
s, in
clud
ing
mac
hine
s fo
r w
orki
ng
cork
. (2
2,23
and
24
)«-»
»
GIE
Q 8
Z
7195
4 Pa
rts,
acc
esso
ries
and
att
achm
ents
for
oth
er
mac
hine
s fo
r w
orki
ng a
sbes
tos-
cem
ent,
cera
mic
s,
conc
rete
, qu
artz
cr
ysta
ls,
mas
onry
, st
one
(in
clud
ing
artif
icia
l, pr
ecio
us
and
sem
ipre
ciou
s st
ones
), an
d si
mila
r m
iner
al m
ater
ials
. (2
2, 2
3,
24 )7
- *>
7195
4 Pa
rts,
acc
esso
ries
and
att
achm
ents
for
oth
er
mac
hine
s fo
r w
orki
ng b
one,
ebo
nite
, ha
rd p
last
ics,
an
d ot
her
hard
car
ving
mat
eria
ls.
(22,
23,
24
)7- *
*
CO
NS
8X
YZ
100
B
GIE
Q 8
XY
Z“
—10
0B
7196
1 C
alen
deri
ng
mac
hine
s an
d si
mila
r ro
llin
g m
achi
nes
n.e.
c.,
and
part
s, n
.e.c
., as
fol
low
s;
(a)
for
pape
r-lh
dust
ries
mac
hine
s, a
nd (
b)
for
rubb
er-
wor
kin
g m
achi
nes.
( 2
) ■“
GIE
Q 8
YZ
7196
3 O
ther
par
ts a
nd a
cces
sori
es, n
.e.c
., fo
r sc
ales
, (4
and
6) t
FIN
P 8
ZB
x D
epar
tmen
t o
f C
omm
erce
E
xpor
t C
ontr
ol C
omm
odit
y N
um
ber
Uni
tPr
oces
sin
g C
ode
and
Rel
ated
C
omm
odit
y G
rou
p N
o.
Val
idat
ed
Lice
nse
R
equ
ired
for
Cou
ntr
y C
roup
s Sh
own
Bel
ow
GL
V $•
Valu
e Li
mit
s fo
r S
hip
men
t to
Cou
ntr
y G
roup
sSp
ecia
lPr
ovis
ions
Lis
tC
omm
odit
y D
escr
ipti
oaT
I*V
X
7196
4 Sp
raye
rs
and
dust
ers,
ag
ricu
ltur
al
and
pest
icid
al,
pow
er a
nd h
and
oper
ated
, exc
ept
law
n sp
rinkl
ers;
an
d pa
rts,
n.e
.c.,
exce
pt n
ozzl
es.
(3
and
5)*>
38
,
......
...A
GS
U 8
YZ
—_
—B
7196
4 H
and-
oper
ated
spr
ay g
uns,
and
pat
td,
n.e.
c.
(3 a
nd 5
)7>3
8F
INP
8Y
ZB
7196
4 Sp
ray
nozz
les
othe
r th
an .
indu
stri
al,,
of
met
al,
exce
pt c
oppe
r ba
se a
lloy;
spr
ay n
ozzl
es o
f ru
bber
; sa
nd b
last
noz
zles
of
hig
h a
lum
ina
ce
ram
ics;
and
law
n sp
rink
lers
. (7
and
9)1
0
FIN
P 8
ZB
7198
0 Pr
esse
s, c
ontin
uous
mix
ers,
and
oth
er e
quip
- m
ent,
n.e.
c.,
for
the
prod
uctio
n of
mili
tary
ex
plos
ives
or
solid
pro
pella
nts
(spe
cify
by
nam
e);
and
spec
ially
des
igne
d pa
rts
.and
acc
esso
ries
, n.e
.c.
(16,
27 a
nd 3
2)7
GIE
Q 1
TV
WX
YZ
500
loo
A
7199
1 M
olds
for
con
cret
e bl
ocks
. (3
)47»
sr. ...
......
..N
o.C
ON
S 8
Z•—
•—8
No.
GIE
Q 8
YZ
)f
——
B71
991
Oth
er m
olds
. (3
)*7.
;....
......
.
ELE
CTR
ICA
L M
AC
HIN
ER
Y, A
PPA
RA
TUS
, A
ND
APP
LIA
NC
ES
No.
GIE
Q 8
XY
Z10
0B
7221
0 O
ther
ele
ctri
c m
otor
s, 1
2,50
0 ho
rsep
ower
and
ov
er;
and
part
s an
d ac
cess
orie
s, n
.e.c
. (S
peci
fy
hors
epow
er,
A.C
. or
D.C
.) (7
and
13
)7
ELM
E 8
WX
YZ
100
B.
7221
0 E
lect
rica
l po
wer
eq
uipm
ent
spec
ially
de
si
gned
for
airc
raft
(fo
r ex
ampl
e, g
ener
ator
s, r
egu
lato
rs,
rect
ifier
s,
conv
erte
rs,
inve
rter
s, m
agne
tic
ampl
ifier
s, t
rans
form
ers,
etc
.) (s
peci
fy, b
y n
ame)
; an
d sp
ecia
lly d
esig
ned
part
s an
d ac
cess
orie
s, n
.e.e
. (1
4 an
d 15
)7
TR
AN
2T
VW
XY
Z50
050
0:
£-2
7221
0 Fl
uore
scen
t ba
llast
s.
(34
)r'*
.....
......
......
....
No.
FIN
P 8
YZ
—•—
B72
210
Oth
er m
otor
s, g
ener
ator
s, g
ener
atin
g se
ts,
rota
ting
co
nver
ters
, tr
ansf
orm
ers,
lim
itin
g re
- ac
tors
, re
gula
tors
, an
d no
nrot
atin
g re
ctifi
ers;
and
pa
rts
and
acce
ssor
ies,
n.e
.c.
(25,
32
and
33)7
ELM
E 8
XY
Zlo
oB
7222
0 Sw
itchg
ear,
ci
rcui
t br
eake
rs,
disc
onne
ct
switc
hes,
fus
es,
pow
er d
istr
ibut
ion
cuto
uts,
and
ot
her
switc
h-ge
ar;
and
light
ning
arr
esto
rs
and
chok
e co
ils;
and
part
s, n
.e.c
. (1
and
18)
7
ELM
E 8
ZB
7222
0 M
otor
con
trol
s sp
ecia
lly d
esig
ned
for
othe
r el
ectr
ic
mot
ors
of
12,5
00
hors
epow
er
or
over
; an
d pa
rts
and
acce
ssor
ies
n.e.
c. (
12
)7
ELM
E 8
a
WX
YZ
100
8
7231
0 A
pplia
nce
cord
set
s an
d ot
her
flexi
ble
cord
se
ts
(wit
h f
itti
ngs
atta
ched
). (1
3)7
Lb.
ELM
E 8
Z8
7232
0 Sp
acer
ins
ulat
ors
of c
lay;
and
ele
ctri
cal
in
sula
tors
and
fit
ting
s of
asb
esto
s or
rub
ber.
(3
an
d 4
)18
Lb.
FIN
P 8
YZ
B
FEDE
RAL
REGI
STER
, VO
L 31
, NO
. 93
—FR
IDAY
, M
AY 1
3, 1
966
7052 RULES AND REGULATIONS
Dep
artm
ent
of C
omm
erce
Exp
ort
Con
trol
Com
mod
ity
Nu
mbe
r tl
nit
Com
mod
ity
Des
crip
tion
7232
0 E
lect
rica
l in
sula
tors
and
fit
ting
s of
gla
ss,
Lb.
mic
a, s
teat
ite,
porc
elai
n, c
eram
ic m
ater
ials
, n.
e.c.
; an
d el
ectr
ical
co
ndui
t fit
tings
, n.
e.c.
, in
clud
ing
elec
tric
al c
ondu
it tu
bing
and
joi
nts,
bas
e m
etal
, lin
ed w
ith
insu
latin
g m
ater
ial.
(5,
6, a
nd 7
)10
7249
9 R
adio
-tel
epho
ne c
arri
er (
mu
ltip
lex)
ter
min
al
....
o
r am
plifi
er e
quip
men
t de
sign
ed t
o de
liver
,, ca
rry,
o
r re
ceiv
e fr
eque
ncie
s hi
gher
tha
n 15
0 ki
locy
cles
in
to o
r in
a c
omm
unic
atio
ns s
yste
m, e
xcep
t car
rier
te
rmin
al e
quip
men
t sp
ecia
lly d
esig
ned
for
pow
er
lines
ope
ratin
g at
fre
quen
cies
be
low
1,5
00 k
ilo
cycl
es (
spec
ify b
y na
me
and
mod
el n
um
ber)
; an
d sp
ecia
lized
co
mpo
nent
s,
part
s,
and
acce
ssor
ies,
n.
e.c.
(sp
ecify
by
nam
e),
(5)T
72
499
Oth
er
radi
o-te
leph
one
carr
ier
(mu
ltip
lex)
#
..«
term
inal
or
ampl
ifier
equ
ipm
ent
desi
gned
to
de
liver
, ca
rry,
or
rece
ive
freq
uenc
ies
high
er t
han
16
kilo
cycl
es
up
to
and
incl
udin
g 15
0/ k
ilocy
cles
, in
to o
r in
a c
omm
unic
atio
ns s
yste
m a
nd c
arri
er
term
inal
equ
ipm
ent
spec
ially
des
igne
d fo
r po
wer
lin
es o
pera
ting
at
freq
uenc
ies
belo
w
1,50
0 ki
lo
cycl
es
(spe
cify
by
na
me
and
mod
el
nu
mbe
r);
and
spec
ializ
ed c
ompo
nent
s, p
arts
, an
d ac
cess
orie
s,
n.e.
c. (
spec
ify b
y n
ame)
. (6
)T
7249
9 Si
ngle
an
d m
ulti-
chan
nel
radi
o-te
legr
aph
....
te
rmin
al
tran
smit
ting
an
d re
ceiv
ing
equi
pmen
t, ex
cept
the
fol
low
ing
equi
pmen
t w
hen
such
equ
ip
men
t is
not
des
igne
d fo
r or
cap
able
of
oper
atio
n at
a r
ate
(fo
r ei
ther
the
cha
nnel
or
any
sub-
chan
ne
l in
a m
ulti-
chan
nel s
yste
m)
in b
auds
(bi
ts p
er
seco
nd)
num
eric
ally
gre
ater
tha
n 60
per
cent
if
the
chan
nel
(or
sub-
chan
nel)
band
wid
th in
cyc
les
per
seco
nd:
(i)
equi
pmen
t w
ith a
ban
d w
idth
per
ch
anne
l of
not
mor
e th
an 3
10 c
ycle
s an
d w
ith a
ra
ted
spee
d of
not
mor
e th
an 1
00 b
auds
(o
r 13
1 w
ords
per
min
ute)
per
cha
nnel
des
igne
d to
CC
ITT
st
anda
rds,
(ii
) eq
uipm
ent
used
with
tel
emet
erin
g,
tele
-com
man
d,
and
tele
sign
allin
g eq
uipm
ent
de
sign
ed f
or in
dust
rial
pur
pose
s in
whi
ch t
he o
pera
tio
nal a
ggre
gate
spe
ed o
f th
e te
legr
aph
equi
pmen
t is
less
tha
n 1,
300
baud
s (b
its p
er s
econ
d),
or (
Hi)
time
divi
sion
mul
tiple
x sy
stem
s up
to
6 ch
anne
ls
with
a m
axim
um a
ggre
gate
spe
ed o
f 30
0 ba
uds
•and
/or
73 w
ords
per
min
ute
per
chan
nel,
and
not
cont
aini
ng a
n au
tom
atic
err
or d
etec
tion
and
cor
rect
ion
syst
em u
sing
a m
ultip
le c
heek
(s
peci
fy
by
nam
e an
d m
odel
n
um
ber)
; an
d sp
ecia
lized
co
mpo
nent
s, p
arts
, an
d ac
cess
orie
s, n
.e,c
, (S
peci
fy
byn
am
e.)»
Pro
eosi
nf
Cod
e an
d R
elat
ed
Com
mod
ity
Cro
up
No*
Val
idat
ed
Lice
nse
Req
uir
ed fo
r C
ount
ry G
roup
s Sh
own
Bel
ow
Cb
V $
Val
ue
Lim
its
for
Sh
ipm
ent t
o C
oun
try
Gro
ups
Spe
cial
Prov
isio
nsL
ist
Dep
artm
ent
of
Com
mer
ce
Exp
ort
Con
trol
Com
mod
ity
Nu
mb
ef
and
Unit
Proc
essi
ng
Cod
e an
d R
elat
ed
Com
mod
ity
Gro
up
No.
Val
idat
ed
Lice
nse
R
equ
ired
for
Cou
ntry
Gro
ups
Sh
own
Bel
ow
GL
V $
Val
ue
Lim
its
for
Sh
ipm
ent t
o C
oun
try
Gro
ups
Spec
ial
’rev
isio
ns
Lis
t
T
JV
XC
omm
odit
y D
escr
ipti
onT
VX
FIN
P 8
z_
B72
499
Oth
er m
ulti-
chan
nel
radi
o-te
legr
aph
term
i-R
AR
A 2
TV
WX
YZ
500
100
nal
tran
smit
ting
and
re
ceiv
ing
equi
pmen
t; an
d ot
her
radi
o-te
legr
aph
equi
pmen
t su
itabl
e fo
r us
eat
spe
eds
grea
ter
than
200
wor
ds p
er m
inut
e or
15
0 ba
uds
(spe
cify
by
nam
e an
d m
odel
nu
mbe
r);
RA
RA
1T
VW
XY
Z80
010
0A
and
spec
ializ
ed c
ompo
nent
s, p
arts
, an
d ac
cess
orie
s,
n.e.
c.'*
7249
9 O
ther
fle
xibl
e w
ave-
guid
es a
nd c
ompo
nent
s de
sign
ed fo
r fr
eque
ncie
s up
to
and
incl
udin
g 12
,500
RA
RA
2T
VW
XY
Z50
060
0
meg
acyc
les
(spe
cify
by
nam
e an
d ty
pe n
um
ber)
. (2
8)»
7249
9 E
lect
roni
c eq
uipm
ent,
n.e.
c.,
and
elec
tron
ic
com
pone
nts,
n.e
.c.,
spec
ially
des
igne
d fo
r op
erat
ion
RA
RA
1T
VW
XY
Z50
025
0
at
ambi
ent
tem
pera
ture
s be
low
m
inus
13
0*C.
RA
RA
8W
XY
Z•—
100
B(m
inus
202
*F.)
(spe
cify
by
nam
e an
d m
odel
num
-an
dh
er);
and
spec
ially
des
igne
d ac
cess
orie
s, s
ubas
sem
-In
done
sia
blie
s, p
arts
or
com
pone
nts
(spe
cify
by
nam
e).
(11
and
80)7
XY
Z10
072
505
Ele
ctri
c st
eam
cab
inet
s fo
r tu
xkis
h ba
ths;
FIN
P 8
«*»
Bde
odor
izer
s; f
ace
and
hand
dry
ers;
and
RA
-Gri
d he
ater
pla
tes®
; an
d pa
rts.
(2
)»>
5072
505
Oth
er e
lect
ro-t
herm
ic a
pplia
nces
; an
d el
ec-
trio
hou
seho
ld t
ype
dom
estic
coo
king
app
lianc
es;
FIN
P 8
Zan
*B
and
part
s. (
2)T
>*4
100
RA
RA
1T
VW
XY
Z50
0loo
A72
620
Oth
er X
-ray
app
arat
us,
med
ical
and
Ind
us
tria
l; m
edic
al a
nd d
enta
l ga
mm
a ra
y eq
uipm
ent;
SA
TE
8X
YZ
9
and
med
ical
and
den
tal a
ppar
atus
bas
ed o
n th
e us
e of
rad
iatio
ns f
rom
ra
dio-
activ
e su
bsta
nces
; an
dpa
rts,
n.e
.c,
(9)T
7295
2 E
lect
rica
l qua
ntity
mea
suri
ng a
nd in
dica
ting
No.
TR
AN
2T
VW
XY
Z1,
000
1,00
0T —
E-2
inst
rum
ents
spe
cial
ly d
esig
ned
for
airc
raft
(f
or
exam
ple,
cur
rent
and
vol
tage
met
ers,
pha
se m
eter
s,
freq
uenc
y m
eter
s, e
tc.)
(22
)25
E-2
7295
2 A
ircr
aft
inst
rum
ents
for
mea
suri
ng, i
ndic
at-
No.
TR
AN
2T
VW
XY
Z1,
000
1,00
0in
g or
con
trol
ling
none
lect
rica
l qu
anti
ties
by e
lec
tric
al
or e
lect
roni
c m
eans
(f
or
exam
ple,
tra
ns
duce
rs,
gene
rato
rs,
indi
cato
rs,
regu
lato
rs o
r co
ntr
olle
rs f
or p
ress
ure,
lev
el, v
acuu
m, f
low
, tem
pera
« tu
re,
rota
tive
spe
ed,
vibr
atio
n, e
tc.)
(23)
»•21
7295
2 G
yro
stab
ilize
rs,
exce
pt f
or a
ircr
aft
con
trol
No,
SA
TE
1T
VW
XY
Z50
010
0•—
Aor
for
sta
biliz
ing
am. e
ntire
sur
face
ves
sel.'
*72
952
Ele
ctro
nic
clos
ed l
oop
feed
bac
k co
ntro
l sy
s-N
o.TO
OL
2T
VW
XY
Z60
010
0te
rns
for
met
alw
orki
ng m
achi
ne t
ools
, de
sign
ed
sole
ly f
or p
ositi
onin
g op
erat
ions
. (S
ee §
399.
2, I
n
terp
reta
tion
7.)
T‘T
VW
XY
Z72
952
Oth
er e
lect
roni
c cl
osed
loo
p fe
ed b
ack
con-
No.
TOO
L 1
500
100
Atr
ol s
yste
ms
for
met
alw
orki
ng m
achi
ne t
ools
, in
w
hich
a c
ontin
uous
fee
dbac
k of
inf
orm
atio
n fr
om
the
actu
al o
pera
tion
res
ults
in
cont
inuo
us c
orre
ctio
n of
con
trol
com
man
ds.
(See
§39
9.2,
Int
erpr
eta
tion
7.)*
*
FEDE
RAL
REGI
STER
, VO
L. 31
, NO
. 93
—FR
IDAY
, M
AY 1
3, 1
966
RULES AND REGULATIONS 7053
Dep
artm
ent
of
Com
mer
ce
Exp
ort
Con
trol
Com
mod
ity
Nu
mbe
rU
nit
¿Pro
tett
ine
Cod
e an
d R
elat
ed
Com
mod
ity
Gro
up
No.
Valid
ated
Li
cen
se
^Req
uir
ed to
t
GL
V $
Vai
ne
Lim
ito
for S
hip
men
t to
Cou
ntr
y G
rou
pefe
pecl
atPr
ovis
ion
sL
ist
Com
mod
ity
Des
crip
tion
Sh
own
Bel
owT
1
VX
7295
2 E
nvir
onm
enta
l-ch
ambe
rs c
apab
le o
f sim
ulat
in
g an
y of
the
follo
win
g co
nditi
ons
over
the
who
le
ran
ge o
f al
titud
es f
rom
sea
lev
el t
o 75
,000
fee
t or
ab
ove:
tem
pera
ture
, pre
ssur
e, r
adia
tion,
or
hum
id
ity.
«*
No.
GIE
Q 1
TV
WX
YZ
£00
A
7297
0 Ac
cele
rato
rs, a
s fo
llow
s: (
a)
beta
tron
s, s
yn
chro
tron
s, c
yclo
tron
s, s
ynch
rocy
clot
rons
, and
line
ar
acce
lera
tors
, (b
) ne
utro
n ge
nera
tors
em
ploy
ing
the
elec
tros
tati
c ac
cele
ratio
n of
ion
s, (
c) e
lect
ron
ac
cele
rato
rs c
apab
le o
f im
part
ing
ener
gies
in
exce
ss
of
500,
000
elec
tron
vol
ts,
and
(d)
othe
r el
ectr
o-
nucl
ear
mac
hine
s ca
pabl
e of
impa
rtin
g en
ergi
es in
ex
cess
of
1,00
0,00
0 el
ectr
on v
oits
to
a nu
clea
r pa
rti
cle
or a
n io
n. (
3) t
No.
SA
TE
2T
VW
XY
Z50
0
7297
0 O
ther
par
ts s
peci
ally
des
igne
d fo
r be
tatr
ons,
sy
nchr
otro
ns,
cycl
otro
ns,
sync
hroc
yclo
tron
s, n
eu
tron
gen
erat
ors
empl
oyin
g th
e el
ectr
osta
tic
ac
cele
rati
on o
f io
ns,
elec
tron
acc
eler
ator
s ca
pabl
e of
im
part
ing
ener
gies
in
exc
ess
of 5
00,0
00 e
lect
ron-
vo
lts,
and
oth
er li
near
acc
eler
ator
s. (
6)r
SA
TE
2T
VW
XY
Z50
0£0
0
7299
1 E
lect
rica
l ap
para
tus
spec
ially
des
igne
d fo
r op
erat
ion
at te
mpe
ratu
res
belo
w m
inus
180
'C.;
and
spec
ially
des
igne
d pa
rts.
(S
peci
fy b
y n
ame.
)1*
ELM
E 1
TV
WX
YZ
500
100
A
7299
2 Pa
rts
and
atta
chm
ents
spe
cial
ly d
esig
ned
for
the
furn
aces
und
er E
xpor
t. C
ontr
ol C
omm
odity
No.
72
992
whi
ch a
re s
ubje
ct t
o th
e Im
port
Cer
tific
ate/
D
eliv
ery
Ver
ifica
tion
proc
edur
e; a
nd p
arts
, ac
ces
sori
es a
nd a
ttac
hmen
ts s
peci
ally
des
igne
d fo
r in
du
ctio
n ha
rden
ing
mac
hine
s, fu
rnac
es, w
eldi
ng
ap
para
tus
and
othe
r eq
uipm
ent s
peci
ally
des
igne
d fo
r th
e pr
oduc
tion
of a
rms,
mun
ition
s, o
r im
plem
ents
o
f war
. (S
peci
fy b
y na
me
and
type
of
equi
pmen
t.)
(6)*
ELM
E 1
TV
WX
YZ
500
100
A.
7299
2 O
ther
ele
ctri
c fu
rnac
es, o
vens
, ele
ctri
c in
duc
tion
and
die
lect
ric
heat
ing
equi
pmen
t, an
d el
ectr
ic
wel
din
g m
achi
nes;
and
par
ts,
acce
ssor
ies,
and
at
tach
men
ts, n
.e.c
. (1
4 an
d 16
)1
ELM
E 8
XY
Z10
0B
7299
5 Pa
rts,
n.e
.c.,
spec
ially
des
igne
d fo
r th
e el
ec
tron
ic c
ompo
nent
cap
acito
rs u
nder
. Exp
ort
Con
trol
C
omm
odity
No.
729
95 s
ubje
ct t
o th
e Im
port
Cer
- ti
ficat
e/D
eliv
ery
Ver
ifica
tion
pro
cedu
re.
(Spe
cify
b
y na
me
and
by t
ype
of c
apac
itor
.)1*«
88
RA
RA
1T
VW
XY
Z50
025
0A
7299
6 E
lect
rica
l ca
rbon
s, e
xcep
t ca
rbon
bru
shes
, A
rtifi
cial
gra
phite
, whe
ther
or
not
cont
aini
ng o
ther
m
ater
ials
to
give
im
prov
ed p
erfo
rman
ce a
t hi
gh
tem
pera
ture
s, h
avin
g an
app
aren
t re
lati
ve d
ensi
ty
of
1.90
and
gre
ater
, ex
cept
non
-pyr
olyt
ie g
raph
ite
of
dens
ity b
etw
een
1.90
and
1.9
5 w
hen
com
pare
d to
w
ater
at 1
5.5'
C.
(60‘
F ),
(1,
5 a
nd 1
0) “
ELM
E 1
TV
WX
YZ
500
500
A. E
—6
I
. D
epar
tmen
t o
f C
omm
erce
E
xpor
t C
ontr
ol C
omm
odit
y N
um
ber
and
Com
mod
ity
Des
crip
tion
Un
it
Proc
essi
ng
Cod
e an
d R
elat
ed
Com
mod
ity
Gro
up
No,
"
! V
alid
ated
Li
cens
e R
equ
ired
for
Cou
ntr
y G
roup
s Sh
own
Bel
ow
GL
V $
Val
ue
Lim
its
for
Sh
ipm
ent t
o C
oun
try
Gro
ups
T
l V
X
Spec
ial
1 Pro
visi
ons
Lis
t
7299
6 E
lect
rica
l ca
rbon
s, e
xcep
t ca
rbon
bru
shes
, ar
tific
ial
grap
hite
, sm
alle
st d
imen
sion
2 i
nche
s or
ov
er,
and
havi
ng a
bor
on c
onte
nt o
f on
e pa
rt p
er
mill
ion
or le
ss.
(Spe
cify
siz
e an
d bo
ron
cont
ent
in
part
s pe
r mill
ion.
) (2
,6 a
nd 9
)1#
7299
6 O
ther
pyr
olyt
ic g
raph
ite
elec
tric
al c
arbo
ns.
<n>w
7299
6 O
ther
el
ectr
ical
ca
rbon
s,
exce
pt
carb
on
brus
hes,
art
ifici
al g
raph
ite,
sm
alle
st d
imen
sion
2
inch
es o
r ov
er.
(Sp
ecify
siz
e an
d bo
ron
cont
ent
in
part
s pe
r m
illio
n.)
(3,
4, 7
, 8,1
2, a
nd 1
3)1
0 72
996
Ele
ctri
cal
carb
on b
rush
es;
and
othe
r br
ush
plat
es,
carb
on a
nd g
raph
ite
elec
trod
es f
or fu
rnac
e or
ele
ctro
lyti
c ce
ll us
e, a
nd l
igh
ting
car
bons
. (1
4)1
7299
6 O
ther
ele
ctri
cal
carb
ons.
(1
5)1
0....
......
......
.72
999
Oth
er e
lect
rica
l ap
para
tus,
n.e
.c.,
and
part
s,
n.e.
c. (S
and
16)*
TRA
NS
POR
T E
QU
IPM
EN
T
7316
3 R
oad-
rail
and
sim
ilar
cont
aine
rs, a
s fo
llow
s;
(a)
jack
eted
con
tain
ers
of 2
50 t
o 50
0 ga
llon
capa
cit
y, d
esig
ned
for
the
hand
ling
of l
iqui
d flu
orin
e;
or (
b)
jack
eted
con
tain
ers
of 5
00 g
allo
n ca
paci
ty
or o
ver,
des
igne
d fo
r liq
uid
nitr
ogen
, ox
ygen
, hy
dr
ogen
, oz
one,
hel
ium
, ar
gon,
or
fluor
ine,
exc
ept
2-sh
ell
or 3
-she
ll co
ntai
ners
rat
ed f
or a
n av
erag
e ev
apor
atio
n lo
ss o
f ov
er 5
per
cent
per
24-
hour
pe
riod.
60’
7316
3 O
ther
liq
uefie
d ga
s ja
cket
ed c
onta
iner
s of
50
0 ga
llon
capa
city
or
over
, ro
ad-r
ail
and
sim
ilar
type
s.“
« “73
163
Oth
er r
oad-
rail
and
sim
ilar
cont
aine
rs s
uit
able
for
tra
nspo
rt b
y ra
il, r
oad,
or
ship
.“73
170
Axl
es a
nd w
heel
s fo
r lo
com
otiv
es a
nd r
ail
way
car
s. (
3)“
7330
0 O
ther
com
mer
cial
tra
ilers
, an
d pa
rts.
(1.
0)*
7330
0 O
ther
tra
ilers
and
veh
icle
s, n
.e.c
., an
d pa
rts,
n.
e.c.
(1
,6 a
nd A
O),0
-73
593
Iron
or
.ste
el b
uoys
; an
d ir
on o
r st
eel
pon
toon
s fo
r pi
pe li
nes.
(2
and
5) 1
7359
3 O
ther
floa
ting
str
uctu
res,
n.e
.c.
(3,
4 an
d 6
)T
7360
0 Pa
rts
and
acce
ssor
ies
spec
ifica
lly
orde
red
and
invo
iced
as
or
igin
al
equi
pmen
t pr
evio
usly
sh
ippe
d.“
ELM
E 1
TV
WX
YZ
500
500
-A
E-6
ELM
E 2
TV
WX
YZ
500
500
ELM
E 2
TV
WX
YZ
1,00
01,
000
—E
-S
ELM
E 8
XY
Z—
-10
0B
ELM
E 8
YZ
BE
LME
8X
YZ
——
100
B
No.
TR
AN
1T
VW
XY
Z50
050
0-
A
No.
TR
AN
2T
VW
XY
Z50
050
0
No.
TR
AN
8X
YZ
——
.10
0B
Lb.
ST
EE
8Z
——
—B
TR
AN
8X
YZ
100
BP
INP
8Z
——
*r
B
FIN
P 8
YZ
——
—B
FIN
P 8
XY
Z—
_10
0B
Exp
ort
cont
rols
app
licab
le t
o ea
ch C
omm
odity
ex
port
ed u
nder
this
cla
ssifi
catio
n ar
e th
ose
whi
ch a
pply
to
the
com
mod
ity w
hen
expo
rted
und
er i
ts in
divi
dual
E
xpor
t C
ontr
ol C
omm
odity
Num
ber.
FUR
NIT
UR
E
8210
3 M
attr
esse
s, m
attr
ess
supp
orts
, an
d si
mila
r st
uffe
d fu
rnis
hing
s, n
.e.c
., co
tton
. (2
, 3 a
nd 4
)7T
EX
T 8
YZ
——
—B
8210
3 O
ther
m
attr
esse
s,
mat
tres
s su
ppor
ts,
and
sim
ilar
stuf
fed
furn
ishi
ngs!
n.e
.c.
(2,
3 an
d .4
)1T
EX
T 8
ZB
FEDE
RAL
REGI
STER
, VO
L. 31
, NO
. 93
—FR
IDAY
, M
AY 1
3, 1
966
7054 RULES AND REGULATIONS
No. 93-
Dep
artm
ent
of
Com
mer
ceN
E
xpor
t C
ontr
ol C
omm
odit
y N
um
ber
rv
and
?
Com
mod
ity
Des
crip
tion
CO ea
Hal
tI
Proc
essi
ng
I C
ode
and
I R
elat
ed
Com
mod
ity
Gro
up
No.
Val
idat
ed
Lice
nse
R
equ
ired
for
Cou
ntr
y G
roup
s S
how
n B
elow
GL
VI
Val
ue
Lim
ita
for
Sh
ipm
ent t
o C
oun
try
Gro
ups
Spe
cial
Prov
isio
n*
Lis
tT
VX
I 82
108
Labo
rato
ry fu
rnit
ure,
met
al; an
d pa
rte,
n.e
.c.
¿i
(1,2
and
3)«
FIN
P 8
XY
Z—
—10
0B
8210
8 Fu
rnit
ure
spec
ially
des
igne
d fo
r ai
rcra
ft;
and
part
s, n
.e.c
. (1
,2 a
nd 3
)61
TR
AN
8X
YZ
——
100
B
8210
8 Pl
asti
c fu
rnit
ure
; an
d pl
asti
c pa
rts,
n.e
.c.
(1,2
and
3)«
......
..F
INP
8Y
Z;
~—
—B
8210
8 O
ther
fu
rnit
ure
and
part
s, n
.e.c
(1,
2 a
nd
3)« TR
AV
EL
GO
OD
S, H
AND
BAG
S, A
ND
OTH
ER
PE
RSO
NA
L G
OO
DS
FIN
P 8
ZB
8310
0 O
ther
trav
el g
oods
, han
dbag
s, a
nd o
ther
per
so
nal g
oods
. (1
and
2)1
CLO
THIN
G
TE
XT
8Z
""
B
8414
0 N
on-a
ppar
el a
rtic
les,
kn
it o
r cr
oche
ted,
not
el
astic
or
-rub
beriz
ed,
who
lly o
r in
ch
ief
wei
ght
silk
, man
-mad
e fib
er, o
r ve
geta
ble
fiber
, exc
ept c
ot
ton
or ju
te.
(1,2
and
3)
7
Lb. i
TE
XT
8Z
*—B
8414
9 O
ther
non
-app
arel
art
icle
s, k
nit
or
croc
hete
d,
not e
last
ic o
r ru
bber
ized
, (1
,2 a
nd 3
)r
PRO
FESS
ION
AL, S
CIE
NTI
FIC
, AN
D C
ON
TRO
LLIN
G
INS
TRU
ME
NTS
; PH
OTO
GR
APH
IC A
ND
OPT
ICA
L G
OO
DS,
WA
TCH
ES
, A
ND
CLO
CK
S
Lb.
TE
XT
8Y
ZB
8611
2 Le
nses
for
hig
h-sp
eed
cam
eras
-and
str
eak
cam
eras
whi
ch a
re s
ubje
ct- t
o th
e Im
port
Cer
tifi-
ca
te/D
eliv
ery
Ver
ifica
tion
pro
cedu
re u
nder
Exp
ort
Con
trol
Com
mod
ity N
os.
86
14
0 a
nd 8
61
50
. (l
)6=.
6->
No.
FIN
P 5
TV
WX
YZ
500
—A
8611
2 M
ount
ed p
rism
s sp
ecia
lly d
esig
ned
for
high
sp
eed
cam
eras
and
str
eak
cam
eras
whi
ch á
re s
ub
ject
to
the
Impo
rt C
erti
ficat
e/D
eliv
ery
Ver
ifica
tion
proc
edur
e un
der
Exp
ort
Con
trol
Com
mod
ity N
os,
8614
0 an
d 86
150.
(6
)«
No.
FIN
P 5
TV
WX
YZ
500
25A
8613
9 Po
wer
-con
trol
led
sear
chlig
hts
desi
gned
fo
r m
ilita
ry
UM
¡ en
d sp
ecia
lly d
esig
ned
part
s' a
nd
acce
ssor
ies.
(S
peci
fy b
y na
me.
) (1
and
2)a
- -*
ELM
E 1
TV
WX
YZ
500
•——
A
8613
9 O
ther
sea
rchl
ight
s an
d sp
otlig
hts;
and
par
ts
and
acce
ssor
ies,
n.e
.c.
(1 a
nd 2
)*•
-H...
......
...E
LME
8X
YZ
——
100
B
8615
0 H
igh
spee
d m
otio
h pi
ctur
e ca
mer
as h
avin
g an
y of
the
follo
win
g ch
arac
teri
stic
s: (
a)
usi
ng fi
lm
wid
ths
'36
mm
. or
narr
ower
and
cap
able
of
reco
rd
ing
at r
ates
in
exce
ss o
f 3,
000
fram
es p
er. s
econ
d w
hen
usin
g a
stea
dy l
igh
t flo
w a
s th
e li
ghti
ng'
so
urce
and
10,
000
fram
es p
er s
econ
d w
hen
usin
g fla
sh e
quip
men
t con
nect
ed to
-the
unw
indi
ng s
yste
m
as
the
light
ing
sour
ce,
(b)
usi
ng
film
wid
ths
grea
ter
than
35
mm
. an
d ca
pabl
e of
rec
ordi
ng i
n ex
cess
of
64 f
ram
es p
er s
econ
d, n
r (c
) ca
pabl
e of
re
cord
ing
in
exce
ss
of
250,
000
fram
es
per*
se
cond
."3* *
*
No.
FIN
P 5
TV
WX
YZ
600
A
IFE
DERA
L RE
GIST
ER,
VOL.
31
WKH
ÊÈÊÊ
ÊÊKÊ
ÊÊÊM
Dep
artm
ent
of
Com
mer
ce
Exp
ort
Con
trol
Com
mod
ity
Nu
mbe
r an
dC
omm
odit
y D
escr
ipti
onU
nit
Proc
essi
ng
Cod
e an
d R
elat
ed
Com
mod
ity
Gro
up
No.
Val
idat
ed
Lice
nse
R
equ
ired
for
Cou
ntr
y G
roup
s Sh
own
Bel
ow
GL
VI
Val
ue
Lim
ite
for
Sh
ipm
ent t
o C
oun
try
Gro
ups
Spe
cial
Pro
visi
on.
TV
X
8615
0 O
ther
hig
h sp
eed
mot
ion
pict
ure
cam
eras
ca
pabl
e of
rec
ordi
ng a
t ra
tes
in e
xces
s o
f 2,
000
fram
es p
er s
econ
d; a
nd s
peci
ally
des
igne
d pa
rts
and
acce
ssor
ies,
n.e
.c.62
FIN
P 8
WX
YZ
--
100
B
8615
0 Pa
rts
and
acce
ssor
ies,
n.e
.c.,
spec
ially
de
sign
ed fo
r hi
gh-s
peed
mot
ion
pict
ure
cam
eras
und
er
Exp
ort
Con
trol
Com
mod
ity N
o. 8
6150
whi
ch a
re
subj
ect t
o th
e Im
port
Cer
tific
ate/
Del
iver
y V
erifi
ca
tion
pro
cedu
re.6
2*65
FIN
P 5
TV
WX
YZ
500
25A
8617
2 W
hir
lpoo
l ba
ths;
m
ine
safe
ty
appl
ianc
es;
and
psyc
holo
gica
l, ed
ucat
iona
l, or
phy
sica
l apt
itude
- te
stin
g ap
para
tus.
(2
)2> *
SA
TE
8X
YZ
100
B
8619
1 R
ange
find
ers
spec
ially
des
igne
d fo
r ca
mer
as
unde
r E
xpor
t C
ontr
ol C
omm
odity
Nos
. 86
140
and
8615
0 w
hich
are
sub
ject
to
the
Impo
rt C
ertif
icat
e/
Del
iver
y V
erifi
cati
on p
roce
dure
. (1
6)a
t*62
No.
FIN
P 5
TV
WX
YZ
500
25A
8619
7 C
ryog
enic
equ
ipm
ent
desi
gned
for
mai
ntai
nin
g an
am
bien
t te
mpe
ratu
re b
elow
min
us 1
80°C
. (m
inu
s 20
2°F.
) an
d. (
i) d
esig
ned
for
use
in m
arin
e ap
plic
atio
n, o
r (i
i) x
ugge
dize
d fo
r m
obile
gro
und
use.
(1
)7
SA
TE
1T
VW
XY
Z50
010
0A
8619
7 E
nvir
onm
enta
l ch
ambe
rs c
apab
le o
f si
mu
lati
ng
any
of t
he f
ollo
win
g co
nditi
ons
over
the
w
hol
e ra
nge
of
altit
udes
fro
m s
ea l
evel
to
75,0
00
feet
or
abov
e: t
empe
ratu
re, p
ress
ure,
rad
iati
on, o
r hu
mid
ity.*
" c
*
GIE
Q 1
TV
WX
YZ
500
A
8640
1 O
ther
tim
e re
cord
ing
mac
hine
s. (
2 a
nd 5
)1*
MIS
CE
LLA
NE
OU
S M
AN
UFA
CTU
RE
D A
RTI
CLE
S,
N.E
.C.
No
.F
INP
8
,X
YZ
100
B
8912
0 C
omm
erci
al p
hono
grap
h re
cord
s, r
ecor
ded.
[R
epor
t bro
ken
reco
rds
and
othe
r re
cord
s fo
r sc
rap
'in
-Exp
ort
Con
trol
C
omm
odity
N
o.
5812
0.]
(5)
>0, U
,TI
FIN
P 8
CU
BA
mmo
morn
mmm
B
8912
0 O
ther
pho
nogr
aph
reco
rds;
and
pho
nogr
aph
reco
rd b
lank
s. (
5)s
o*75
FIN
P 8
Z—
——
B
8930
0 M
anuf
actu
red
plas
tic
prod
ucts
, ex
cept
art
icl
es w
holly
or
part
ially
mad
e of
pol
ypyr
omel
Uti-
mid
e,
poly
benz
imid
azol
e,
poly
tetr
aflu
oroe
thyl
ene,
or
po
lytr
ifluo
roeh
loro
ethy
lene
; or
ite
ms
who
lly
mad
e of
oth
er fl
uoro
carb
on p
olym
ers
or co
poly
mer
*,
the
follo
win
g on
ly:
arm
ban
ds;
bath
room
fixt
ures
; bo
xes,
em
pty;
cas
ein
plas
tic s
lides
; cel
loph
ane
tape
, gu
mm
ed;
fram
es,
exce
pt d
ispl
ay fr
ames
; ha
ndle
s;
job
tray
s; k
nobs
; m
ailin
g ca
ses;
nur
sing
bot
tles;
sh
ower
cur
tain
s; s
topp
ers
for
basi
ns a
nd b
atht
ubs;
su
spen
ders
; to
ilet
seat
s;
vial
s;
and
wat
erpr
oof
oute
rgar
men
ts,
incl
udin
g ra
inco
ats.
(1
8 an
d 14
)*.*
*
FIN
P 8
YZ
B
». 93
—FR
IDAY
, M
AY 1
3, 1
966
RULES AND REGULATIONS 7055
7056 RULES AND REGULATIONS
Department of Commerce Export Control Commodity Number
and VoltProcessing Okie and Related
Commodity Group No.
Validated License
Required for Country Groups
Shown Below
GLV $ Value Limito for Shipment to Country Groupa Special
Provision*LiftCommodity Description
t V X
89300 Manufactured plastic products, except articles wholly or partially made of polypyromelliti- mide, polybenzimidazole, polytetrafluoroethylene, polytrifluorochloroethylene, or items wholly made of other fluorocarbon polymers or copolymers, the following* only: aprons, baby pants, bibs, and other indoor type wearing apparel; ash trays; belts (apparel) ; bottle and container closures; calendar pad holders; celluloid file signals; cigar ribbons; clipboards; containers for household use (soap dishes, etc.); desk calendars; desk sets, except pen sets; dinnerware, tableware, and kitchenware used in preparation, serving, and storing of food and drink; display equipment (forms, display boxes, Stands, frames); disposable knives, forks and spoons; draperies (not firm, woven); flexible film Specialty bags; fly swatters; garment bags (not requiring cutting or further manufacture for use); ink pots; ink stands; lamp shades; manicure sets; mats; paperweights; sausage casings; sequins; sponges, synthetic; table cloths (cut to size): tackle boxes; pressure sensitive or gummed plastic tape not covered in another entry under Export Control Commodity No. 89300; and Venetian blinds, including separate slats and tapes. (13 and 14) 8>28
Doz.
F IN P 8 z B
89929 Prepared knots and tufts, cotton or wool, for broom or brush making. (1 and 2)*> 10>28
F IN P 8 Y Z —- B
89929 Other prepared knots and tufts for broom or brush making; and mops, dusters, squeegees, brooms, tooth brushes, and other brushes, including paint rollers, wire brushes, and brushes for machines, other than dental, medical, surgical, and veterinary appliances. (1 and 2) 3i 10>28
Doz. F IN P 8 Z B
89933 Combustible preparations and products, n.e.c. (includes liquid fuel for mechanical lighters in containers not forming part of the lighter and not exceeding 300 cc capacity). [Report liquid fuels in containers exceeding 300 cc capacity under the commodity number applicable to the fuel.] (1)2
ORGN 8
FINP 8
z
z
B
B89957 Animated displays for window dressing. (1 )8 FINP 8 X Y Z 100 B89992 Prepared feathers and down and articles
thereof, except millinery, bedding, comforters and pillows. (1)*
AG R I 8 Z B
89995 Wigs, false beards, and other articles, n.e.c., of wool-like specialty hair. (1) *. 80
......... TEXT 8 Y Z — — B
89995 Wigs, false beards, switches and other articles of other animal hair or human hair. (1 )8> 8<t
TEXT 8 Z — — — B
89999 Other nonmilitary aircraft ground handling equipment, ground installed arresting systems, flight simulators, ground flying trainers and other related equipment, n.e.c.; and parts and accessories, n.e.c. (3) 88
T R A N 8 X Y Z 100 B
[F.R. Doc. 66-5065; Filed, May 12, 1966; 8:49 a.m.]
Title 16-COMMERCIAL PRACTICES
Chapter I— Federal Trade Commission[Docket No. C-1057]
PART 13— PROHIBITED TRADE PRACTICES
Broadway-Hale Stores, Inc.Subpart—Acquiring corporate stock or
assets: § 13.5 Acquiring corporate stock or assets.(Sec. 6, 38 Stat. 721; 15 U.S.C. 46. Interpret or apply sec. 7, 38 Stat. 731, as amended; 15 U.S.C. 18) [Cease and desist order, Broadway-Hale Stores, Inc., Los Angeles, Calif., Docket C-1057, Apr. 14, 1966]
Consent order requiring a California chain department store, the 16th largest in the Nation, to cease and desist from acquiring without permission of the Federal Trade Commission any department or GMAF (General Merchandise, Ap
parel, Furniture) store for a period of 5 years, unless the Commission, through an industrywide proceeding, issues rules or guidelines covering such acquisitions.
The order to cease and desist, including further order requiring report of compliance therewith, is as follows:
I. I t is ordered, That for five (5) years from the effective date of this order, respondent, Broadway-Hale Stores, Inc., shall cease and desist from acquiring, directly or indirectly, without first notifying the Federal Trade Commission and obtaining its consent, any department store or other GMAF störe, or any interest in capital stock or other share capital, or any assets constituting a substantial part of all of the assets, of any concern engaged in the department store or other GMAF store business, other than The Emporium Capwell Co.
II. I t is further ordered, That section 1 of this order shall terminate if the Federal Trade Commission, through trade regulation rules or other like nonadjudicative industrywide proceedings, issues rules or guidelines covering the subject matter of this order.
III. I t is further odrered, That, in the event the Federal Trade Commission, in any adjudicative or consent order proceeding involving a market extension acquisition of one or more department or other GMAF stores by a company which owns or operates one or more department stores, issues any order which imposes limitations on future such market extension acquisitions less restrictive than the comparable provisions of this order, then the Federal Trade Commission shall, on application of respondent, pursuant to Rule 3.28 of the Commission’s rules of practice, reopen this proceeding in order to make whatever revisions, if any, are necessary and appropriate to bring the restrictions imposed on respondent herein into conformity with those imposed by such order.
IV. I t is further ordered, That, within sixty (60) days after the effective date of this order, and every ninety (90) days thereafter, Broadway-Hale submit in writing to the Federal Trade Commission a report setting forth in detail the manner and form in which it is complying and' intends to comply with the provisions of this order.
Issued: April 14,1966.By the Commission.[ seal ] Jo seph W . S h ea ,
Secretary.[F.R. Doc. 66-5212; Filed, May 12, 1966;
8:45 a.m.]
[Docket No. C-1059]
PART 13— PROHIBITED TRADE PRACTICES
Herman FeldmanSubpart—Invoicing products falsely:
§ 13.1108 Invoicing products falsely: 13.1108-45 Fur Products Labeling Act. Subpart—Misbranding or mislabeling: § 13.1212 Formal regulatory and statutory requirements: 13.1212-30 Fur Products Labeling Act. Subpart—Neglecting, unfairly or deceptively, to make material disclosure: § 13.1852 Formal regulatory and statutory requirements: 13.1852-35 Fur Products Labeling Act.(Sec. 6, 38 Stat. 721; 15 U.S.C. 46. Interpret or apply sec. 5, 38 Stat. 719, as amended; sec. 8, 65 Stat. 179; 15 U.S.C. 45, 69f) [Cease and desist order, Herman Feldman, New York, N.Y., Docket C-1059, April 26, 1966]
Consent order requiring a New York City manufacturing furrier to cease misbranding and deceptively invoicing his fur products.
The order to cease and desist, including further order requiring report of compliance therewith, is as follows:
I t is ordered, That respondent Herman Feldman, an individual trading as Herman Feldman, or under any other trade name, and respondent’s representatives, agents, and employees, directly or through any corporate or other device, in connection with the introduction, or manufacture for introduction, into commerce, or the sale, advertising, or offering for sale in commerce, or the transportation or distribution in commerce, of any fur product; or in connection with the
FEDERAL REGISTER, VOL. 31, NO. 93— FRIDAY, MAY 13; 1966
manufacture for sale, sale, advertising, offering for sale, transportation, or distribution, of any fur product which is made in whole or in part of fur which has been shipped and received in commerce, as the terms “ commerce,” “ fur,” and “ fur product” are defined in the Pur Products Labeling Act, do forthwith cease and desist from:
A. Misbranding fur products by :1. Failing to affix labels to fur prod
ucts showing in words and in figures plainly legible all of the information required to be disclosed by each of the subsections of section 4(2) of the Fur Products Labeling Act.
2. Failing to set forth on labels the item number or mark assigned to each such fur product.
B. Falsely or deceptively invoicing fur products by:
1. Failing to furnish invoices, as the term “invoice” is defined in the Fur Products Labeling Act, showing in words and figures plainly legible all the information required to be disclosed in each of the subsections of section 5(b) (1) of the Fur Products Labeling Act.
2. Setting forth information required under section 5(b) CD of the Fur Products Labeling Act and the rules and regulations promulgated thereunder in abbreviated form.
3. Setting forth the term “blended” or any term of like import as part of the information required under section 5(b) (1) of the Fur Products Labeling Act and rules and regulations promulgated thereunder to describe the pointing, bleaching, dyeing, tip-dyeing or otherwise artificial coloring of furs contained in fur products.
4. Failing to set forth on invoices the item number or mark assigned to each such fur product.
I t is further ordered, That the respondent herein shall, within sixty (60) days after service upon him of this order, file with the Commission a report in writing setting forth in detail the manner and form in which he has complied with this order.
Issued: April 26, 1966.By the Commission.[ seal ] Joseph W. S h e a ,
Secretary.[F.R. Doc. 66-5213; Filed, May 12, 1966;
8:46 a.m.]
[Docket No. 0-1058]
PART 13— PROHIBITED TRADE PRACTICES
Gus Pappas and Gus Pappas FursSubpart—Invoicing products falsely:
§13.1108 Invoicing products falsely: 13.1108-45 Fur Products Labeling Act. Subpart—Misbranding or mislabeling: § 13.1185 Composition: 13.1185-30 Fur Products Labeling Act; § 13.1212 Formal regulatory and statutory requirements: 13.1212-30 Fur Products Labeling Act. Subpart—Neglecting, unfairly or deceptively, to make material disclosure: § 13.1845 Composition: 13.1845-30 Fur Products Labeling Act; § 13.1852 Formal
RULES AND REGULATIONSregulatory and statutory requirements: 13.1852-35 Fur Products Labeling Act.(Sec. 6, 38 Stat. 721; 15 U.S.C. 46. Interpret or ajiply sec. 5, 38 Stat. 719, as amended; sec. 8, 65 Stat. 179; 15 U.S.C. 45, 69f) [Cease and desist order, Gus Pappas Furs, Chicago, 111., Docket C—1058, April 26, 1966]
Consent order requiring a Chicago, 111., manufacturer, wholesaler and retailer of fur products to cease misbranding and falsely invoicing his furs.
The order to cease and desist, including further order requiring report of compliance therewith, is as follows:
I t is ordered, That respondent Gus Pappas, an individual trading under his own name, or as Gus Pappas Furs, or under any other trade name, and respondent’s representatives, agents and employees, directly or through any corporate or other device, in connection with the introduction, or manufacture for introduction, into commerce, or the sale, advertising, or offering for sale in commerce, or the transportation or distribution in commerce, of any fur product; or in connection with the manufacture for sale, sale, advertising, offering for sale, transportation, or distribution, of any fur product which is made in whole or in part of fur which has been shipped and received in commerce, as the terms “commerce” , “ fur” , and “ fur product” are defined in the Fur Products Labeling Act, do forthwith cease and desist from:
A. Misbranding fur products by:1.. Falsely or deceptively labeling or
otherwise identifying any such fur product as to the name or designation of the animal or animals that produced the fur contained in the fur product.
2. Representing, directly or by implication, on labels that the fur contained in any fur product is natural when the fur contained therein is pointed, bleached, dyed, tip-dyed, or otherwise artifically colored.
3. Failing to affix labels to fur products showing in words and in figures plainly legible all of the information required to be disclosed by each of the subsections of section 4(2) of the Fur Products Labeling Act.
4. Failing to set forth the term “Dyed Broadtail-processed Lamb” on labels in the manner required where an election is made to use that term in lieu of the term “Dyed Lamb” .
B. Falsely or deceptively invoicing fur products by:
1. Failing to furnish invoices, as the term “ invoice” is defined in the Fur Products Labeling Act, showing in words and figures plainly legible all the information required to be disclosed by each of the subsections of section 5(b) (1) of the Fur Products Labeling Act.
2. Setting forth on the invoices pertaining to fur products the name or names of any animal or animals other than the name of the animal producing the fur contained in the fur product as specified in the Fur Products Name Guide, and as prescribed by the rules and regulations.
3. Failing to set forth on invoices the item number or mark assigned to fur products.
7057
I t is further ordered, That the respondent herein shall, within sixty (60) day's after service upon him of this order, file with the Commission a report in writing setting forth in detail the manner and form in which he has complied with this order.
Issued: April 26, 1966.By the Commission.[ seal ] Jo seph W. S hea ,
Secretary. |[F.R. Doc. 66-5214; Filed, May 12, 1966;
8:46 a.m.]
[Docket No. 7643]
PART 13— PROHIBITED TRADE PRACTICES
Libbey-Owens-Ford Glass Co. and General Motors Corp.
Subpart—Advertising falsely or misleadingly: § 13.20 Comparative data or merits: 13.20-20 Competitors’ products; § 13.25 Competitors and their products: 13.25-20 Competitors’ products; § 13.175 Quality of product or service. Subpart— Disparaging competitors and their products—Competitors’ products: § 13.1015 Quality. Subpart—Using deceptive techniques in advertising: § 13.2275 Using deceptive techniques in advertising: 13.2275-70 Television depictions. .(Sec. 6, 38 Stat. 721; 15 U.S.C. 46. Interpret or apply sec. 5, 38 Stat. 719, as amended, 15 U.S.C. 45) [Mddified order, Libbey-Owens- Ford Glass Co. et al., Toledo, Ohio, Docket 7643, Apr. 7,1966]
Order modifying a cease and desist order of-the Commission dated September 20,1963, in accordance with an order of the Court of Appeals, Sixth Circuit, dated December 16,1965, by deleting the phrase “or otherwise misrepresenting the grade or quality of glass used in any window” from the Commission’s original order, 28F.R. 11452.
The modified order to cease and desist, including further order requiring report of compliance therewith, is as follows:
I t is ordered, That Libbey-Owens-Ford Glass Co., a corporation, and its officers, agents, representatives, and employees, directly or through any corporate or other device, in connection with the advertising, offering for sale, sale or distribution of its automotive glass products in commerce as “ commerce” is defined in the Federal Trade Commission Act, do forthwith cease and desist from:
1. Representing, directly or by implication, that:
(a) The automobile safety plate glass used in the side windows of General Motors Corp. automobiles is of the same grade and quality as that used in windshields of such automobiles.
(b) The automobile safety sheet glass used in automobiles other than General Motors Corp. automobiles is of the same grade and quality as the sheet glass used in home windows.
2. Using in advertising any picture, demonstration, experiment or comparison, either alone or accompanied by oral or written statements, to prove the qual-
FEDERAL REGISTER, VOL. 31, NO. 93— FRIDAY, MAY 13, 1966
7058
ity or merits of any such products, or the superiority o f any such products over competing products, when such picture, demonstration, experiment or comparison is not in fact genuine or accurate and does not constitute actual proof of the claim because of the undisclosed use and substitution of a moek-up or prop instead of the product, article, or substance represented to be used therein.
3. Disparaging the quality or properties o f any competing product or products through the use of false or misleading pictures, depictions, demonstrations, or comparisons, either alone or accompanied by oral or written statements.
4. Misrepresenting in any manner the quality or merits o f any such products, or the superiority o f any such products over competing products.
I t is further ordered, That General Motors Corp., a corporation, and its officers, agents, representatives, and employees, directly or through any corporate or other device, In connection with the advertising, offering for sale, sale or distribution o f its automotive glass products, sold either as part of an automobile or separately, in commerce, as “commerce” is defined in the Federal Trade Commission Act, do forthwith cease and desist from:
t. Representing, directly or by implication, that:
(a) The automobile safety plate glass used in the side windows of its automobiles is of the same grade and quality as that used in windshields o f such automobiles.
(b) The automobile safety sheet glass used in automobiles other than General Motors Corp. automobiles is of the same grade and quality as the sheet glass used in home windows.
2. Using in advertising any picture, demonstration, experiment or comparison, either alone or accompanied by oral or written statements, to prove the quality or merits of any sueh products, or the superiority of any such products over competing products, when such picture, demonstration, experiment, or comparison is not in fact genuine or accurate and does not constitute actual proof of the claim because of the undisclosed use and substitution of a mock-up or prop instead of the product, article, or substance represented to be used therein.
3. Disparaging the quality or properties o f any competing product or products through the use of false or misleading pictures, depictions, demonstrations, or comparisons, either alone or accompanied by oral or written statements.
4. Misrepresenting in any manner the quality or merits of any such products, or the superiority o f any such products over competing products.
I t is further ordered,, That respondents shall, within sixty (60) days after service upon them of tins order, file with the Commission a report, in writing, setting forth in detail the manner and form in
RULES AND REGULATIONSwhich they have complied with the order to cease and desist set forth hereto.
Issued: April 7, 1066.By tire Commission.[ seal ] Jo seph W . S h e a ,
Secretary.[F.R. Doc. 66-5215; Filed. May 12, 1966;
8:46 a.m.}
[Docket No. C-1055]
PART 13— PROHIBITED TRADE PRACTICES
Mangel Stores Corp., et ai.Subpart—Advertising falsely or mis
leadingly: § 13.30 Composition of goods: 13.30-75 Textile Fiber Products Identification Act; § 13.73 Formal regulatory and statutory requirements: 13.73-90 Textile Fiber Products Identification Act. Subpart—Misbranding or mislabeling: §13.1185 Composition: 13.1165-80 Textile Fiber Products Identification Act; § 13.1212 Formal regulatory and statutory requirements: 13JL212-80 Textile Fiber Products Identification Act. Subpart—Neglecting, unfairly or deceptively, to make material disclosure : § 13.1852 Formal regulatory and statutory requirements: 13.1852-70 Textile Fiber Products Identification Act.(Sec. 6, 38 Stat. 721; 15 TJJ3.C. 46. Interpret or apply sec. 5, 38 Stat. 719, as amended; 72 Stat. 1717; 15 XJ.S.C. 45, 70) ¡[>Ceaee and desist order, Mangel Stores Corp. et al., New,York, N.Y., Docket C-1055 April 6, 1966]
In the Matter of Mangel Stores Corp., a corporation, trading as Mangel's, Salle Ann and Shopper's FairConsent order requiring a New York
City operator of a chain of retail stores engaged in selling a medium line of wearing apparel, to cease misbranding and falsely advertising its textile fiber products.
The order to cease and desist, including further order requiring report of compliance therewith, is as follows:
I t is ordered, That respondent Mangel Stores Corp., a corporation, trading as Mangel’s, Salle Ann and Shopper’s Fair, or under any other name, and its officers, and respondent’s representatives, agente, and employees, directly or through any corporate of other device, in connection with the introduction, delivery, for introduction, sale, advertising, or offering for sale, in commerce, or the transportation or causing to be transported in commerce, or the importation into the United States, of any textile fiber product; or in connection with the sale, o ffering for sale, advertising, delivery, transportation, or causing to he transported, o f any textile fiber product, which has been advertised or offered for sale in commerce; or in connection with the sale, offering for sale, advertising, delivery, transportation, or canting to be transported, after shipment in commerce, of any textile fiber product, whether in its original state or contained
in other textile fiber products, as the terms “commerce” and ’ “textile fiber product” are defined in the Textile Fiber Products Identification Act, do forthwith cease and desist from;
A. Misbranding textile fiber products by:
L Falsely or deceptively stamping, tagging, labeling, invoicing, advertising or otherwise identifying such products by representing, either directly or by Implication, through the ¡use of such term as “¡Linen” or any bther terms, that any fibers are present in a textile fiber product when such is not the case.
2. Failing to affix labels to such 'textile fiber products showing in a clear, legible and conspicuous manner each element of information required to be disclosed by section 4 Cb) o f the Textile Fiber Products Identification Act.
3. Using abbreviations in setting forth the information required to be disclosed under the Textile Fiber Products Identification Act.
B. Falsely and deceptively advertising textile fiber products by :
1. Making any representations, directly or by implication, as to ¡the. fiber contents of any textile fiber product in any written advertisement which is used to aid, promote, or assist, directly or indirectly, in the sale or offering for sale of such textile fiber product, unless the same information required to be shown on the stamp, tag, label, or other means o f identification under section 4(b) (1) and <2) of the Textile Fiber Products Identification Act is contained in the said advertisement, except that the percentages of the fibers present in the textile fiber product need not be stated.
2. Using a fiber trademark in advertisements without a full disclosure of the required content information in at least one instance in the said advertisement.
.3. Using a fiber trademark in advertising textile fiber products containing more than one fiber without such fiber trademark appearing in the required fiber content information in immediate proximity and conjunction with the generic name of the fiber in plainly legible type or lettering of v equal size and conspicuousness.
4. Using a fiber trademark in advertising textile fiber products containing only one fiber without such fiber trademark appearing at least once in the advertisement, in immediate proximity and conjunction with the generic name of the fiber in plainly legible and conspicuous type.
I t is further ordered, That the respondent herein, shall, within sixty (60) days after service upon it o f this order; file with the Commission a report in writing setting forth m detail the manner and form in which it has complied with this order.
Issued: April 6,1966.By the Commission.
Jo se ph W . S hea , Secretary.
(FJB . Doc. 66-5216; Filed, May 12, 1966;8:46a.m.}
FEDERAI REGISTER, V O i. 31, NO. 93— FRIDAY, MAT 13, 1966
RULES AND REGULATIONS 7059
{Docket No. 8635 o.]
PART 13— PROHIBITED TRADE PRACTICES
Merck & Co., Inc., et al.Subpart—Advertising falsely or mis
leadingly: § 13.170 Qualities or properties of product o r service: 13.170-52 medicinal, therapeutic, healthful, etc.(Sec. 6, 38 Stat. 721; IS U.S.C. 46. Interpret or apply sec. 5, 38 Stat. 718, as amended, 15 U.S.C. 45{ I Cease and desist order, Merck & Co., Inc,, et al., Rahway, N.J., Docket 8635, Apr. 8,1966]
In the matter of Merck & Co., Inc., * Corporation, Trading as Quinton Co^ andDoherty, Clifford, Steers & Shenfield,Inc., a CorporationOrder requiring a New Jersey drug
manufacturer and its advertising agency to cease falsely representing in its television commercials or other media that Its “ Sucrets” or “ Children’s Sucrets" have any therapeutic effect upon throat infections in excess of temporary relief of minor pain.
The order to cease and desist, including further order requiring report of compliance therewith, is as follows:
I t is ordered, That the initial decision be modified by striking finding No. 21 and substituting therefor the following:
21. Through the use o f said advertisements, respondents have represented, directly and by implication, that “ Sucrets” and “Children’s Sucrets,” by virtue of their hexylresoreinol content, will unqualifiedly reach, kin, or render ineffectual, germs, including streptococci and staphylococci in the throat tissues, that are contributing to an existing throat infection, and that said products are effective in relieving severe sore throat pain.
I t is further ordered, That the initial decision be modified by striking findings numbered 29 through 42 and substituting therefor the following:
29. Although “ Sucrets” and “ Children’s Sucrets” will, by virtue of their hexylresoreinol content, kill germs, including staphylococci and streptococci, on contact therewith, they will not normally reach, kill, or render ineffectual, germs, including streptococci and staphylococci 4n the throat tissues, that are contributing to an existing throat infection.
30. Streptococcal and straphylococcal infections of the throat may be precursors of infections of the heart, kidney, blood, bones, and other structures, and the failure to institute promptly adequate treatment of streptococcal and staphylococcal throat infections may seriously imperil health. A special hazard of inadequate treatment of streptococcal sore throat is the subsequent development in certain persons, particularly children, of acute rheumatic fever or acute nephritis.
31. “Sucrets” and “Children’s Sucrets” have no beneficial effect on severe pain of sore throat, nor will they provide relief of the pain of sore throat in excess of temporary relief of minor pain.
32. The aforesaid advertisements were and are misleading In material respects and constituted, and now constitute, ‘Taise advertisements” as that term is defined in the Federal Trade Commission Act.
I t is further ordered, That the initial decMon be modified by striking therefrom that part o f the section entitled “Conclusions” beginning on page 18 with the words “On the other hand” and ending on page 20 with the words “the fo llowing order shall issue” and substituting therefore the following:
The dissemination by the respondents of the false advertising, as aforesaid, constituted, and now constitutes, unfair and deceptive acts and practices in commerce, in violation of sections 5 and 12 o f the Federal Trade Commission Act.
I t is further ordered, That the initial decision be modified by striking the order on pages 20 and 21 and substituting therefor the following:
I t is ordered, That respondent Merck & Co., Inc., a corporation trading as Quinton Co. or under any other name, and its officers, agents, representatives, and employees, directly or through any corporate or other device, in connection with the offering for sale, sale or distribution of throat lozenges or any similar preparation, do forthwith cease and desist from, directly or indirectly :
1. Disseminating, or causing to be disseminated, by means of the U.S. mails or by any means in commerce, as “ commerce" is defined in the Federal Trade Commission Act, any advertisement which represents directly or by implication that “Sucrets” or “Children’s Sucrets” , or any other preparation of similar chemical composition or properties, by virtue of their hexylresoreinol content, or otherwise:
(a) Will reach, kill or have any effect upon germs contributing to an existing throat infection, or otherwise that they are effective in the treatment of throat infection.
(b) Will provide relief of the pain of sore throat in excess of temporary relief of minor pain.
2. Disseminating, or causing to be disseminated, by the U.S. mails or by any means in commerce, as “ commerce” is defined in the Federal Trade Commission Act, any advertisement which misrepresents directly or by implication the efficacy or therapeutic value of any throat lozenge or similar preparation.
3. Disseminating, or causing to be disseminated, by any méans, for the purpose of inducing, or which is likely to induce, directly or indirectly, the purchase of any such preparation, in commerce, as “ commerce” is defined in the Federal Trade Commission Act, any advertisement which contains any of the representations prohibited by paragraphs 1 and 2 hereof. .
I t is further ordered, That respondent Doherty, Clifford, Steers & Shenfield, Inc., a corporation, and its officers, agents, representatives, and employees, directly or through any corporate or other device, in connection with the
offering for sale, sale or distribution of throat lozenges or any similar preparation, do forthwith cease and desist from, directly or indirectly:
1. Disseminating, or causing to be disseminated, by means of tire U.S. mails or by any means in commerce, as “ commerce” is defined in the Federal Trade Commission Act, any advertisement which represents directly or by implication that “ Sucrets” or “Children’s Sucrets", or any other preparation of similar chemical composition or properties, by virtue of their hexylresoreinol content, or otherwise:
(a) Will reach, kill or have any effect upon germs contributing to an existing throat infection, or otherwise that they are effective in the treatment of throat infection.
ib> Will provide relief of the pain of sore throat in excess o f temporary relief of minor pain.
2. Disseminating, or causing to be disseminated, by the U.S. mails or by any means in commerce, as “ commerce” is defined in the Federal Trade Commission Act, any advertisement which misrepresents directly or by implication the efficacy or therapeutic value of any throat lozenge or similar preparation: Provided, however, That it shall be a defense hereunder that respondent neither knew nor had reason to know of the falsity or deceptive capacity of such advertisement.
3. Disseminating, or causing to be disseminated, by any means, for the purpose of inducing, or which is likely to induce, directly or indirectly, the purchase of any such preparation, in commerce, as “commerce” is defined in the Federal Trade'Commission Act, any advertisement which contains any of the representations prohibited by paragraphs 1 and 2 hereof.
I t is further ordered, That the hearing examiner’s initial decision, as modified by this order and the accompanying opinion, be, and it hereby is, adopted as the decision of the Commission.
I t is further ordered, That the respondents shall within sixty (60) days after service upon them of this order, file with the Commission a report, in writing, setting forth in detail the manner and form in which they have complied with the order to cease and desist set forth herein.
Issued: April 8, 1966.By the Commission.[ se al ] Joseph W. S h e a ,
Secretary.[F.R. Doc. 66-5217; Filed, May 12, 1966;
8:46 a.m.]
[Docket No. C-1056]
PART 13— PROHIBITED TRADE PRACTICES
Ovation Cosmetics, Inc., and J. Harry Ebbert
Subpart—Maintaining resale prices: § 13.1130 Contracts and agreements;
FEDERAI REGISTER, VOL. 31, NO. 93— FRIDAY, MAY 13, 1966
7060 RULES AND REGULATIONS§ 13.1155 Price schedules and announcements.(Sec. 6, 38 Stat. 721; 15 U.S.C. 46. Interpret or apply sec. 5, 38 Stat. 719, as amended, 15 U.S.C. 45) [Cease and desist order, Ovation Cosmetics, Inc., et al., Woodland Hills, Calif., Docket C-1056, Apr. 8, 1966]
Consent order requiring a California marketer of cosmetics and toiletries, to cease entering into agreements with its wholesalers, jobbers, and retailers to fix and maintain the resale prices of its products, and using other unfair practices.
The order to cease and desist, including further order requiring report of compliance therewith, is as follows:
I t is ordered, That respondent Ovation Cosmetics, Inc., a corporation, its officers, agents, representatives, employees, successors and assigns, and respondent J. Harry Ebbert, individually and as an officer of Ovation Cosmetics, Inc., his agents, representatives, and employees, directly or through any corporate or other device, in connection with the offering for sale, sale, or distribution of goods or commodities in commerce, as “commerce” is defined in the Federal Trade Commission Act, do forthwith cease and desist from :
1. Entering into, maintaining, or enforcing any contract, agreement, understanding, marketing system, or course of conduct with any dealer or distributor of such goods or commodities to do or perform or attempting to do or perform any of the following acts, practices, or things :
(a) Fix, establish, or maintain the prices, discounts, rebates, qr other terms or conditions of sale relating to pricing upon which such goods or commodities may be resold;
(b) Require or coerce any person or firm to enter into a contract, agreement, understanding, marketing system, or aourse of conduct which fixes, establishes, or maintains the prices, discounts, rebates, or other terms or conditions of sale relating to pricing upon which such goods or commodities may be resold.
2. Engaging, either as part of any contracts, agreements, understandings, or courses of conduct with any distributor or dealer of any such goods or commodities, or individually and unilaterally, in the practice of:
(a) Publishing or distributing, directly or indirectly, any resale price, product price list, order form, report form, or promotional material which employs resale prices for such goods or commodities without stating clearly and visibly in conjunction therewith that said price or prices are only “suggested” or “recommended” ;
(b) Publishing or distributing, directly or indirectly, any sales manual or instructional material which employs sample resale prices for such goods or commodities for purpose of demonstration without stating clearly and visibly in conjunction therewith that said price, rate of discount, rate of rebate, or other terms or conditions of sale relating to pricing upon which such goods or commodities may be resold are not binding upon the distributor or dealer :
(c) Entering into, maintaining, enforcing, or threatening to enforce any contracts, agreements, rights, or privileges pursuant to or claimed by virtue of the Miller-Tydings Act, as amended, the McGuire Act, or any other similar legislation, for a period of three (3) years from the date of this order.Provided, however, That nothing contained in this order shall be interpreted as prohibiting respondents from, directly or indirectly, refusing to sell to or enforcing or asserting their lawful contract or other rights against any wholesale distributor, jobber, retailer, or any other person or company for any legitimate reason unrelated to pricing.
I t is further ordered, That respondent Ovation Cosmetics, Inc., within sixty (60) days from the date of service upon it of this order, shall mail a copy of the order to each person or firm respondent has reason to believe may be engaged in the resale of any “Ovation Cosmetics” product.
I t is further ordered, That the respondents herein shall, within sixty (60) days after service upon them of this order, file with the Commission a report in writing setting forth in detail the manner and form in which they have complied with this order.
Issued: April 8, 1966.By the Commission.[ seal ] Jo seph W. S h e a ,
Secretary.[F.R. Doc. 66-5218; Filed, May 12, 1966;
8:46 a.m.]
FEDERAL REGISTER, V O L 31, NO. 93— FRIDAY, MAY 13, 1966
7061
Proposed Rule MakingDEPARTMENT OF THE INTERIOR
Fish and Wildlife Service [ 50 CFR Part 32 1
MONTEZUMA NATIONAL WILDLIFE REFUGE, N.Y.
HuntingNotice is hereby given that pursuant
to the authority vested in the Secretary of the Interior by the Migratory Bird Conservation Act of February 18, 1929, as amended (45 Stat. 1222, 16 U.S.C. 715), and the Migratory Bird Hunting Stamp Act of 1934, as amended (48 Stat. 451; 16 U.S.C. 718d), it is proposed to amend 50 CFR 32.11 and 32.21 by the addition of Montezuma National Wildlife Refuge, N.Y., to the list of areas open to the hunting of migratory game birds and upland game, as legislatively permitted.
It has been determined that the regulated hunting of migratory game birds and upland game may be permitted as designated on Montezuma National Wildlife Refuge without detriment to the objectives for which the area was established.
It is the policy of the Department of the Interior, whenever practicable, to afford the public an opportunity to participate in the rulemaking process. Accordingly, interested persons may submit written comments, suggestions, or objections, with respect to this proposed amendment, to the Director, Bureau of Sport Fisheries and Wildlife, Washington, D.C., 20240, within 30 days of the date of publication of this notice in the F ederal R egister .
1. Section 32.11 is amended by the addition of the following area as one where hunting of migratory game birds is authorized:§ 32.11 List o f open areas; migratory
game birds.♦ * * * *
New Y ork
Montezuma National Wildlife Refuge.
2. Section 32.21 is amended by the addition of the following area as one where hunting of upland game is authorized:§ 32.21 List of open areas; upland game.
* * * * *New Y ork
Montezuma National Wildlife Refuge.
A bram V . T u n is o n , Acting Director.
M a y 6,1966.[P.R. Doc. 66-5219; Piled, May 12, 1966;
8:47 a.m.]
DEPARTMENT OF AGRICULTUREConsumer and Marketing Service
[ 7 CFR Part 1038 1[Docket No. AO 194-A12]
MILK IN ROCK RIVER VALLEY MARKETING AREA
Notice of Hearing on ProposedAmendments to Tentative Marketing Agreement and OrderPursuant to the provisions of the Agri
cultural Marketing Agreement Act/of 1937, as amended (7 U.S.C. 601 et seq.), and the applicable rules of practice and procedure governing the formulation of marketing agreements and marketing orders (7 CFR Part 900), notice is hereby given of a public hearing to be held at the Fiks Club, 210 West Jefferson Street, Rockford, 111., beginning at 10 a.m., l.t., on May 19,1966, with respect to proposed amendments to the tentative marketing agreement and to the order, regulating the handling of milk in the Rock River Valley marketing area.
The public hearing is for the purpose of receiving evidence with respect to the economic and emergency marketing conditions which relate to the proposed amendments, hereinafter set forth, and any appropriate modifications thereof, to the tentative marketing agreement and to the order.
The proposed amendments, set forth below, have not received the approval of the Secretary of Agriculture.
Proposed by Pure Milk Association and Mid-West-Dairymen's Company:
Proposal No. 1. In § 1038.44(d), delete the words “not more than 150 miles, by the shortest highway distance as determined by the market administrator, from the nearer of the City Halls of Janesville, Wis., and Sterling, 111.” .
Proposed by the Dairy Division, Consumer and Marketing Service:
Proposal No. 2. Make such changes as may be necessary to make the entire marketing agreement and the order conform with any amendments thereto that may result from this hearing.
Copies of this notice of hearing and the order may be procured from the Market Administrator A. W. Colebank, 72 West Adams Street, Room 814, Chicago, 111., 60603, or from the Hearing Clerk, Room 112-A, Administration Building, U.S. Department of Agriculture, Washington, D.C., 20250, or may be there inspected.
Signed at Washington, D.C., on May 11, 1966.
C larence H. G irard, Deputy Administrator,
Regulatory Programs.[F.R. Doc. 66-5289; Filed, May 12, 1966;
8:51 a.m.]
17 CFR Part 1039 J[Docket No: AO 212—A18]
MILK IN MILWAUKEE MARKETING AREA
Notice of Hearing on Proposed Amendments to Tentative Marketing Agreement and Order
Pursuant to the provisions of the Agricultural Marketing Agreement Act of 1937, as amended (7 U.S.C. 601 et seq.), and the applicable rules of practice and procedure governing the formulation of marketing agreements and marketing orders (7 CFR ¡Part 900), notice is hereby given of a public hearing to be held at The Milwaukee Inn, 916 East State Street, Milwaukee, Wis., beginning at 10 a.m., l.t., on May 17, 1966, with respect to proposed amendments to the tentative marketing agreement and to the order, regulating the handling of milk in the Milwaukee, Wis., marketing area.
The public hearing is for the purpose of receiving evidence with respect to the economic and emergency marketing conditions which relate to the proposed amendments, hereinafter set forth, and any appropriate modifications thereof, to the tentative marketing agreement and to the order.
The proposed amendments, set forth below, have not received the approval of the Secretary of Agriculture.
Proposed by Pure Milk Association: Proposal No. 1. Delete all of § 1039.-
44(c) and in § 1039.44(d) delete the words “and is within the State of Wisconsin or not more than 150 miles, by the shortest highway distance as determined by the market administrator, from the City Hall of Milwaukee, Wis.”
Proposal No. 2. In computing uniform prices pursuant to §§ 1039.61 and 1039.62, provide that any handler’s plants which were regulated by Order No. 39 prior to May 1,1966, shall be considered as a separate handler system and a separate uniform price shall be computed for such handler.
Proposal No. 3. Revise the second proviso in § 1039.18 as follows: “And provided further, That for May and June 1966 all producer milk received at a pool plant which first became subject to regulation by this order in such, period shall be base milk.”
Proposed by the Dairy Division, Consumer and Marketing Service:
Proposal No. 4. Make such changes as may be necessary to make the entire marketing agreement and the order conform with any amendments thereto that may result from this hearing.
Copies of this notice of hearing and the order may be procured from the Market Administrator, 4920 West Burleigh Street, Milwaukee, Wis., 53210, or from the Hearing Clerk, Room 112-A, Admin-
FEDERAL REGISTER, V O L 31, NO. 93— FRIDAY, MAY 13, 1966
7062
istration Building, U.S. Department of Agriculture, Washington, D.C., 20250 or may be there inspected.
Signed at Washington, D.C., on May 11,1966.
Clarence H. G irard, Deputy Administrator,
Regulatory Programs.[F.R. Doc. 66-5290; Filed, May 12, 1966;
8:51 ara.]
[ 7 CFR Part 1125 1[Docket No. AO-226-A11]
MILK IN PUGET SOUND, WASH., MARKETING AREA
Decision on Proposed Amendmentsto Tentative Marketing Agreementand to OrderPursuant to the provisions of the
Agricultural Marketing Agreement Act of 1937, as amended (7 U.S.C. 601 et seq.), and the applicable rules of practice and procedure governing the formulation of marketing agreements and marketing orders (7 CFR Part 900), a public hearing was held at Seattle, Wash., on April 19-28, 1965, pursuant to notice thereof issued on March 15, 1965 (30 F.R. 3603).
Upon the basis of the evidence introduced at the hearing and the record thereof, the Deputy Administrator, Regulatory Programs, on December 2, 1965 (30 F.R. 15152; F.R. Doc. 65-13098), filed with the Hearing Clerk, U.S. Department of Agriculture, his recommended decision containing notice o f the opportunity to file written exceptions thereto.
The material issues, findings and conclusions, rulings, and general findings of the recommended decision (30 F.R. 15152; F.R. Doc. 65-13098) are hereby approved and adopted and are set forth in full herein subject to the following modifications:
1. Under the subheading “ 2. The regulation of producer-handlers.", a new paragraph is added immediately following the seventh paragraph.
2. Under the subheading “5. Definitions relating to plants", the fifth through the eighth paragraphs are deleted and five new paragraphs are substituted therefor.
3. Under the subheading “ 6. Definitions of ‘Handler1, ‘Producer’, and ‘Route disposition’.", a new paragraph is added at the end of part (a ) .
The material issues on the record of the hearing relate to:
(1) Expansion of the marketing area;(2) The regulation of producer-han
dlers;(3) The price for Class n milk;(4) Computation of butterfat differ
entials;( 5 ) Definitions relating to plants ;(6) Definitions of “ Handler” , “Pro
ducer” , and “Route disposition” ;(7) Division of the shrinkage allow
ance between handlers;
PROPOSED RULE MAKING(8) Changes in the classification pro
visions;(9) Accounting for nonfluid milk
products used for reconstitution and fortification of fluid milk products;
(10) Suspension or modification of the base-excess plan; and
(11) Miscellaneous changes.Findings and conclusions. The fol
lowing findings and conclusions on the material issues are based on evidence presented at the hearing and the record thereof:
1. Expansion of the marketing area. The boundaries of the Puget Sound Marketing area should be extended to include most of the remaining unregulated areas in the counties now partly included in the marketing area. The Washington counties of San Juan and Island also should be added to the area. The Olympic Peninsula counties of Kitsap, Mason, Clallam, and Jefferson should remain unregulated.
A handler proposed that the presently defined marketing area be enlarged to include the counties of Island and San Juan and the remaining portions of most of the counties now only partly included in the marketing area. Proponent contended that if the proposal were adopted much of the recordkeeping done by handlers to segregate their fluid milk sales outside the defined marketing area from their in-area sales could be eliminated.
The proposal should be adopted in most respects. The presently unregulated territory wjthin the counties of Whatcom, Skagit,- Snohomish, King, Grays Harbor, and Lewis (except the town of Vader) should be included in the marketing area. Also, the presently unregulated southeastern part of Pierce County and the unregulated territory in Pacific County north of township 11 N, excluding Long Island and the North Beach Peninsula, should be added to the area. The marketing area should include also the relatively small counties of San Juan and Island which are comprised of several islands located west of Whatcom, Skagit, and Snohomish Counties.
Handlers are required when reporting their total fluid milk sales to the market administrator to indicate the separate quantities of such sales which are made inside and outside the defined marketing area. The sales areas of several handlers in the market extend into unregulated territory. They, therefore, must keep such records as will enable them to report their sales on a segregated basis. The maintenance o f adequate records is often difficult, particularly when only parts of retail routes are involved. Expanding the marketing area in the manner described would simplify their record-keeping and reporting of route disposition.
Enlargement of the marketing area to this limited extent would not extend the practical scope o f regulation. Virtually all of the fluid milk sold within this pro
posed territory is distributed by handlers or producer-handlers now regulated under the Puget Sound order. In November 1964 such sales amounted to about974,000 pounds, or 2 percent of the total Class I utilization by all such persons. It is not likely that handlers principally associated with other markets would extend their routes into the proposed area. Much of it is mountainous and sparsely populated. The periphery of the enlarged area would consist primarly of mountain ranges, the Canadian border and large expanses of water. Unregulated fluid milk sales are now made in the proposed area only by small producer- handler operations located at Lopez and Friday Harbor in San Juan County and at Eatonville in Pierce County.
The order now divides the marketing area into several districts for the purpose of pricing producer milk in accordance with its location value. These dis- stricts should be redefined to include all of the proposed enlarged marketing area. The districts are now described In terms of specific counties to the extent of their regulated portions. The additional territory in each county to be added to the marketing area should be included in the same district as the presently regulated portion of the respective county. Island County should be included within District 4 where plants are now subject to a location adjustment of 15 cents per hundredweight of Class I milk. San Juan County should be within a new District 5. The location adjustment of 40 cents which is presently applicable in San Juan County should be continued for that area.
Three regulated handlers proposed that Kitsap, Mason, Clallam, and Jefferson Counties be included in the marketing area. These counties are located on the Olympic Peninsula of Washington where such handlers have route distribution of fluid milk products. Proponents claimed that operators of unregulated distributing plants located on the peninsula are able to compete advantageously for fluid milk sales in that area because they are able to procure milk supplies at less than order prices. Proponents also contended that producers under the order carry the burden of reserve supplies associated with the Class I sales on the peninsula and, therefore, should share in the returns from such sales. Operators of three of the unregulated plants expressed opposition to the proposals affecting their respective sales areas.
In considering the expansion of the marketing area, witnesses generally attempted to distinguish between the marketing conditions applicable to Kitsap and Mason Counties and those applicable to Clallam and Jefferson Counties. The market characteristics of these two pairs of counties are very similar, however. Also, these same characteristics were shown to be basically the same for
FEDERAL REGISTER, VOL. 3T, NO. 93— FRIDAY, MAY 13, 1966
the two peninsulas of Pierce County which are adjacent to Kitsap County. The following findings and conclusions are generally applicable to all four comities and those parts of Pierce County proposed herein to be excluded from the marketing area.
Unregulated handlers distribute approximately 70 percent of the fluid milk sold in each of the two pairs of counties. The major part of the unregulated sales in Kitsap and Mason Counties, as well as in the Pierce County peninsulas, is made by a cooperative association from its distributing plant at Bremerton in Kitsap County. Other such sales in those counties are by a handler at Port Orchard in Kitsap County and a producer-handler at Bremerton. Virtually all of the unregulated fluid milk sold in Clallam and Jefferson Counties is distributed by another cooperative association from its plant at Port Angeles in Clallam County. A producer-handler also is located in Clallam County. The two cooperative associations have fluid milk sales only in the counties just indicated.
There are no regulated distributing plants located in the four counties. The regulated milk which is distributed there is packaged primarily at pool plants in Seattle. Most of the packaged products are transported to the Olympic Peninsula by ferry and toll bridges across Puget Sound and are distributed either directly to wholesale and retail outlets or through distribution points to such outlets.
The competitive problems which proponents claimed they were experiencing on the peninsula were attributed to the marketing practices of the two cooperative associations which operate the unregulated plants at Bremerton and Port Angeles. Neither association, however, has the procurement cost advantage on their milk supplies relative to order prices which proponents alleged. One association’s payments to its members per hundredweight of milk averaged 36 cents in 1963 and 33 cents in 1964 over the applicable Class I prices^The other association’s payments to its Grade A producers over the applicable Class I prices averaged about 37 cents per hundredweight in 1964. In each case such payments include the yearend distribution of the association’s earnings. These payments were for all Grade A milk received from members regardless of whether the milk was used in Class I or Class I I products. Class I utilization of Grade A milk at the associations’ plants was described as averaging 79 percent in one case and 90 percent in the other. Both associations purchase their supplemental milk supplies from regulated sources in the market. They pay the same price (the order Class I price plus a premium) for this milk as do regulated proprietary handlers who purchase milk for Class I purposes. On the basis of these circumstances it is concluded that these two associations are not obtaining their Grade A milk supplies at less than order prices.
The four Olympic Peninsula counties are a significant market for milk regu-
PROPOSED RULE MAKINGlated by the order. In addition to the packaged milk distributed there by regulated handlers, considerable bulk milk is purchased for supplemental purposes by the two major unregulated handlers on the peninsula. In 1964, 19 percent of the fluid milk sold from the Bremerton plant was obtained from regulated sources. Three percent of the fluid sales from the Port Angeles plant in that year represented milk prioed under the order.
Producers whose milk is pooled under the order thus would be expected to have a definite interest in the marketing conditions on the Olympic Peninsula. There is no indication, however, that such producers in general consider that there is a need for regulating this area for the purpose of improving their marketing situation. In fact, a number of such producers located on the peninsula, who are members of one of the major cooperative associations in the market, expressed in their briefs specific opposition to the proposals. They indicated that any benefit to them resulting from the regulation of these counties would be negligible. Strong opposition to the extension of regulation to their area was expressed by the farmers whose milk is disposed of through the two unregulated plants at Bremerton and Port Angeles. From the standpoint of all milk producers involved, there thus appears to be no compelling reason to include these counties in the marketing area.
Competitive problems in obtaining or maintaining wholesale and retail outlets can be caused by various factors outside the scope of the regulatory program. The ability of an unregulated handler to offer to consumers lower prices, more attractive price discounts, and various services which a regulated handler believes he cannot meet is not necessarily attributable to the former’s unregulated status. As previously indicated, most of the regulated milk distributed on the Olympic Peninsula is packaged at Seattle pool plants. Such milk must be moved to the peninsula either by ferry or toll bridges or by a circuitous land route through Olympia. Thus, regulated handlers selling packaged milk on the peninsula obviously incur distribution costs not experienced by their unregulated competitors.
Certainly a major factor in the Puget Sound market is the premiums over order prices which regulated proprietary handlers pay cooperative associations and nonmember producers for their milk supplies. In 1963 and 1964, for instance, such premiums averaged 35 and 42 cents, respectively, per hundredweight. This undoubtedly affects a handler’s position in the market relative to handlers who may not be paying comparable prices. This is not a circumstance which the order regulation is designed to change.
There is no indication that the inclusion in the marketing area of Kitsap, Mason, Clallam, and Jefferson Counties and certain northwestern areas of Pierce County is necessary to establish or maintain orderly marketing conditions. Accordingly, the proposals are denied.
7063
Expansion of the marketing area as proposed herein will reduce the amount of producer milk sold outside the marketing area. However, out-of-area sales will still exist. Presently, all producer milk disposed of not only within the marketing area but outside such area is fully regulated and priced under the order. It is necessary that this arrangement be continued under the Puget Sound order. Otherwise, the effect of the order would be nullified and the orderly marketing process would be jeopardized.
I f only his in-area sales were subject to classification, pricing and pooling, a regulated handler with Class I sales both inside and outside the marketing area could assign any value he chose to his outside sales. He thereby could reduce his average cost of all of his Class I milk below that of other regulated handlers having all, or substantially all, of their Class I sales within the marketing area. In short, unless all milk of such a handler is fully regulated under the order, he in effect would not be subject to effective price regulation. The absence of effective classification, pricing and pooling of such milk would disrupt orderly marketing conditions within the regulated marketing area and would lead to a complete breakdown of the order. I f a pool handler were free to value a portion of his milk at any price he chooses, it would be impossible to enforce uniform prices to all fully regulated handlers or a uniform basis of payments to the producers who supply the market. It is essential, therefore, that the order price all the producer milk received at a pool plant regardless of the point of disposition.
Limited quantities of Class I milk may be sold within the regulated marketing area from plants not under any Federal order. There is, of course, no way to treat such unregulated milk uniformly with regulated milk other than to regulate it fully. Nevertheless, it has been concluded that the application of “partial” regulation to plants having less association than required for market pooling would not jeopardize marketing conditions within the regulated marketing area. Official notice is taken of the June 19,1964, decision (29 F.R. 9214) supporting amendments to several orders, including the Puget Sound order.
The operator of this partially regulated plant is afforded the option of: (1) Paying an amount equal to the difference between the Class I price and the weighted average price for all milk with respect to all Class I sales made in the marketing area, (2) purchasing at the Class I price under any Federal order sufficient Class I milk to cover his limited disposition within the marketing area, or (3) paying his dairy farmers an amount not less than the value of all their milk computed on the basis of the classification and pricing provisions of the order (the latter representing an amount equal to the order obligation for milk which is imposed on fully regulated handlers).
While all fluid milk sales of the partially regulated plant are not necessarily
FEDERAL REGISTER, VOL. 31, NO. 93— FRIDAY, MAY 13, 1966No. 93-
7064
priced on the same basis as fully regulated milk, the provisions described are, however, adequate under most circumstances to prevent sales of milk not fully regulated (pooled) from adversely affecting operation of the order and the fully regulated milk.
2. The regulation of producer-handlers. Producer-handlers should continue to be exempt from the pooling and pricing provisions of the order. Also, certain restrictions now applicable to a person’s designation as a producer-handler should be removed.
The order provides essentially that a person who is a dairy farmer and who processes in his plant and distributes in the marketing area milk of his own production may be defined as a producer- handler and may be accorded exemption from all payment obligations normally applicable to handlers fully regulated under the order. A producer-handler must meet certain requirements to acquire and maintain such status, principal of which are limitation on the sources from which he may receive milk, necessary ownership and control of production, processing and distribution facilities, and limitation on the acquisition and disposition of production resources and facilities.
H ie three major cooperative associations in the market proposed that various degrees of regulation, depending upon their size, should be applied to producer- handlers. Under their proposal a producer-handler whose daily Class I sales averaged 4,000 pounds or more would be fully regulated. I f his daily Class I sales ranged between 2,000 pounds and 3,999 pounds, only partial regulation would apply. In this case, the degree of exemption of his own production from pooling and pricing would diminish as Class I sales neared the upper limit. A producer-handler having Class I sales of less than 2,000 pounds daily would be exempt from regulation, providing that any purchases of supplemental milk were made from pool sources. He would be required to submit reports if he had at least 110 pounds of Class I sales daily in the marketing area.
A proprietary handler proposed that producer-handlers whose average daily Class I sales exceed 2,000 pounds be subject to full regulation. Two other proposals by proprietary handlers, as set forth in the hearing notice, would fully regulate all producer-handlers, in the one case, and, in the other, would regulate producer-handlers with a large volume of sales in any one day. At the hearing proponents abandoned the latter proposals and supported the proposal made by the cooperative associations.
The need for regulating producer- handlers in this market has been considered at a public hearing on previous occasions. At those times it was not found necessary to pool and price the milk of such persons to achieve the purposes of the statute authorizing Federal orders. It should be made clear at this point, however, that the Secretary is empowered by the Act to impose through an order regulation of producer-handlers in their capacity as handlers, if justified by
PROPOSED RULE MAKINGprevailing marketing conditions. Producer-handlers claimed at the hearing that the statutory authority for such regulation does not exist and that on this basis all proposals pertaining to the regulation of producer-handlers should be dismissed at the outset. They contended that producer-handlers cannot be fully regulated as handlers inasmuch as they do not purchase milk from, and pay prices to, producers. Producer-handlers also claimed that in the Puget Sound market they cannot be subjected to full regulation inasmuch as they sell milk and milk products solely within the State of Washington and, thus, not in interstate commerce.
Neither claim is valid. The authority to regulate a handler with respect to milk of his own production under the terms of the Agricultural Marketing Agreement Act has been upheld in the courts in several cases arising under different milk orders.
The authority to regulate all handlers in a market in which it is found that the handling of milk or its products is in the current of interstate or foreign commerce, or directly burdens, obstructs or affects interstate or foreign commerce in milk or its products, has also been established in the courts. There is no reason to believe that these decisions would not be equally applicable to the regulation of producer-handlers in the Puget Sound market.
In their exceptions, producer-handlers cited the failure of the recommended decision to give recognition to the “Food and Agriculture Act of 1965” insofar as it relates to the status of producer- handlers under the Federal order program. This legislation, which amended the Agricultural Marketing Agreement Act of 1937, was passed by Congress and made effective subsequent to the time this hearing was held. The part of the Food and Agriculture Act of 1965 which specifically relates to producer-handlers is set forth in section 104 under Title I. It reads as follows: “ The legal status of producer handlers of milk under the provisions of the Agricultural Adjustment Act, as reenacted and amended by the Agricultural Marketing Agreement Act of 1937, as amended, shall be the same subsequent to the adoption of the amendments made by this title as it was prior thereto.” In light of this, it must be held that the statutory authority to regulate producer-handlers, as upheld in the courts, is continued.
Forty-three producer-handlers now distribute milk of their own production in the Puget Sound marketing area. In 1964 they produced 46.1 million pounds of milk, of which 37.8 million pounds, or 82 percent, were disposed of as Class I milk in the marketing area. These sales represented 7.1 percent of the total inarea fluid milk sales. For March 1965, the most recent month for which data were available at the hearing, this percentage was 7.8.
Of the 43 producer-handlers, 23 had Class I disposition in December 1964 of less than 1,000 pounds daily. Their sales represented 9 percent of the total fluid sales o f all producer-handlers that
month. Of the remaining producer- handlers, four were in the 1,000- to 2,000- pound daily sales range and sold 5 percent of this total, eight were in the 2,000- to 4,000-pound category and sold 18 percent, and eight had daily volumes over4,000 pounds and sold 68 percent of the producer-handler milk in the market.
The number of producer-handlers and the volume of their Class I sales have increased in recent years. In 1960, the first full year following the incorporation of the present producer-handler provisions in the order, there were 22 producer-handlers, of which 8 sold 2,000 pounds or more of Class I milk daily. The most rapid increase in numbers occurred in 1963 when there were 26 in January and 40 in December. Total producer-handler sales in the marketing area rose from 20.6 million pounds in 1960 (4.0 percent of total in-area sales) to 37.8 million pounds in 1964, an increase of 83 percent. By comparison fluid in-area sales of regulated handlers increased about 1.3 percent.
Proponents of regulating producer- handlers argued that the increase in producer-handler numbers and their sales has resulted because the exemption from pooling their own production provides producer-handlers with a competitive advantage as compared with milk of producers which is priced to handlers regulated under the order. Proponents maintained that the larger producer- handlers who have the preponderance of the total producer-handler sales therefore should be treated the same as other producers in their capacity as producers, and as fully regulated handlers in their capacity as handlers. This would be accomplished by requiring equalization with the pool on their own production, i.e., charging them class prices for their milk used and crediting them with producer prices.
The incentive which a producer has for becoming a producer-handler is the additional return which he may receive by marketing his production through his own processing and distribution facilities rather than through a regulated handler. The blend price (or base and excess prices) of the market represents the return that he as a producer may expect for his milk under the order. To the extent which he can sell a higher proportion of his production as Class I milk than the market average utilization of all producer milk in Class I, he as a producer-handler would have available the price differential between the utilization value of his own production and the order blend price which he could retain to enhance his returns as a producer or, as a handler, could use as a price incentive to maintain or increase fluid sales. This opportunity for a greater Class I utilization of his own production is evident by the fact that the average Class I utilization of producer milk by regulated handlers in 1964 was 45 percent, while producer-handlers’ total Class I utilization of their own production (including both in-area and out-ofarea sales) was 87 percent.
A realistic estimate under these circumstances of the competitive advantage
FEDERAL REGISTER, VOL. 31, NO. 93— FRIDAY, MAY 13, 1966
PROPOSED RULE MAKING 7065
on Class I sales which proponents claimed producer-handlers enjoy may be made by comparing the Class I and producer base pricey under the order. The base price is the producer price in this market which closely reflects the Class I utilization of producer milk. In 1964 producers received this price for 89 percent of their milk, with the remainder of their milk being priced at the excess (Class I I ) price. Producer-handlers sold approximately the same percentage of their milk as Class I, and realized a Class I I return on the remainder. Thus, by comparing the Class I price to the price for base milk, a meaningful estimate can be made o f the competitive advantage it is alleged producer-handlers enjoy with respect to the proportion of their production sold as Class I milk. In 1964 the order Class I price averaged $4.82 and the order base price averaged $3.99, a difference of 83 cents per hundredweight.
These order prices, however, -do not represent the real measure o f the effective Class I-blend price differential prevailing in the market. Under purchase and sale arrangements between cooperative associations and handlers, premium Class I prices prevail in the market. The difference in 1964 between the premium Class I price and the base price paid to members of the largest cooperative association averaged about $1.02. Similar premium prices have been in e ffect for many years with the average annual Class I premium varying between 37 and 48 cents per hundredweight since 1960.
An important factor in determining this difference between the Class I and base prices is, of course, the percentage of producer milk used in Class I. This percentage has been dropping steadily in the Puget Sound market, from 74 percent in 1952 to 51 percent in i960 to the present 45 percent. Producer receipts have more than doubled since 1952, while Class I sales have increased about 26 percent. The extent to which premium prices over order prices have contributed tp this increase in producer receipts cannot be appraised with accuracy, but premium prices must be recognized as a contributing factor.
Marketing margins are an additional factor affecting the marketing situation under which producer-handlers compete for sales. While Class I prices both under the order and on a premium basis were about the same in 1960 and 1964, the reported retail priee to consumers was higher in 1964 than in 1960 by several cents per quart.
Proponents argue that exempting producer-handlers from pooling creates the potential whereby producer-handlers may ultimately have all Class I sales and producers and fully regulated handlers have only Class I I utilization. They point out that as produoer-handler sales increase the difference between the -Class I and blend prices to producers increases and that producer-handlers thereby increase their competitive advantage. Nevertheless, sales of producer-handlers have not increased generally throughout the Federal order system, but on the
average have declined despite the fact that the exemption from pooling applies in all such orders. The cooperative associations’ proposals would have reduced the Class I-base price difference under the order by only about 2 cents per hundredweight. The proposals would affect only 16 of the 43 producer-handlers operating in the market and thus would leave essentially the same incentive as at present for new producer-handlers and for expansion to the 2,000-pound daily limit proposed.
While during recent years the Class I sales of producer-handlers have increased and producer-handlers with substantial production have become a more significant competitive factor in the market, it cannot be concluded, as proponents claim, that these increases are a result of the regulatory pregram. .Producer-handler sales have not increased generally under Federal milk order programs. During this period of increasing producer-handler sales In this market factors outside the order (negotiated prices above order price levels and increased marketing margins) have contributed to widening the difference between the returns available when milk is marketed to regulated handlers by producers and those available when the producer acts as a producer-handler and sells his milk to consumers. It cannot be concluded that increased producer-handler sales in the Puget Sound market are a problem which the order has created. Neither can it be concluded that at this time regulation of producer- handlers as proposed is required to protect the regulatory scheme of the order.
A number of requirements which a producer-handler must meet in order to be designated as such are now incorporated in the order. Such provisions have the purpose of making a producer- handler rely almost entirely on his own production for his supply of milk. They also assure that a producer-handler bears the full financial responsibilities and risks associated with his entire milk operation. Producer - handlers considered these requirements as veiy stringent but indicated that they could continue to operate under them i f they were allowed to remain free of full regulation. Cooperative associations, in conjunction with their proposal ¡to apply various degrees of regulation to producer-handlers, proposed the elimination of these requirements. In view of their perhaps undue complexity, evaluation of the continued need for all facets of these requirements in light of their practical effect upon the maintenance of orderly marketing should be made. .
It is concluded that the requirement that a person who has lost his designation as a producer-handler wait a year to regain such status should be removed. A minor failure to meet all requirements for producer-handler status can result in a person losing such status. The regulatory effect may often be disproportionate to the relative significance of the requirement which was. not met. Under present circumstances this provision probably contributes only
to a minor degree in this market to the maintenance o f orderly marketing. Since they must rely on their own production, producer-handlers must establish adequate production facilities to assure a sufficient milk supply for their own operation. Because of this there is likely to be little reason for producer- handlers to shift in and out of the pool for the purpose of obtaining additional' milk supplies. Removal of this requirement would provide a more reasonable application of regulation to producer- handlers.
The order should continue to provide that a producer-handler lose his status as such beginning with the month following that in which he violates the requirements fo r producer-handler status. Redesignation as a producer-handler should be preceded by the performance of. such requirements for 1 month.
In connection with this change, certain additional provisions should be removed from the order inasmuch as they no longer would have any practical e ffect. The order now limits the times when a producer-handler may dispose of or acquire, without losing his status as a producer-handler, a dairy herd, cattle bam of milking parlor which has been used, or is subsequently used, by another person for producing milk which is delivered as producer milk to another handler. A producer-handler loses his status if he so transfers such resources and facilities during any of the months of March through July. Similarly, if a producer-handler so acquires such resources and facilities during any of the months of August through February, he loses producer-handler status. A related provision stipulates that a producer-handler may not again use these same resources and facilities if they were previously used by him during any of the preceding 12 months and subsequently used during that time by another person for the production of producer milk. The attached order reflects the deletion of these provisions.
An additional provision which allows a producer-handler to purchase an unlimited quantity of milk from pool plants during a single span of 45 consecutive days in any 12-month period should be deleted. Its purpose is to allow producer-handlers to obtain milk from sources other than their own production during emergency conditions. The provision was placed in the order in conjunction with other changes in the producer-handler provisions which would require that a producer-handler could not regain designation as such for 12 months once his designation was cancelled. The provision was considered at that time as a reasonable adjunct to the 12-month waiting period provision.
The removal of this latter 12-month provision would reduce considerably any adverse regulatory impact on a producer- handler Who might find it necessary to purchase milk from pool sources during some emergency situation and thus loçe his producer-handler status. As indicated, redesignation as a producer-handler would need to be preceded by meet-
FEDERAL REGISTER, VOL. 31, NO. 93— FRIDAY, ;MAY 13, 1966
7066
ing the producer-handler ^performance requirements for only 1 month. Thus, the importance of the provision allowing unlimited purchases of pool milk for 45 days becomes considerably less in view of the other changes in the producer-handler provisions adopted herein.
The extent to which this provision has been used in emergencies was not indicated.' A producer-handler witness testified, though, that producer-handlers as a group have purchased only very minor quantities of milk from regulated handlers. The continuance of this provision in conjunction with the removal of the 12-month waiting period for redesignation as a producer-handler would provide such person an opportunity to obtain unlimited quantities of milk from pool sources during much of the time he maintains producer-handler status. Removal of this provision would not affect the provision which allows producer- handlers to purchase from pool plants up to 100 pounds on a daily average of packaged fluid milk products, other than whole milk.
3. The price for Class I I Milk. The Class I I price should be the average price per hundredweight for manufacturing grade milk f.o.b. plants in Minnesota and Wisconsin, as reported by the U.S. Department of Agriculture, adjusted to a 3.5-percent butterfat test. Such class price should not exceed a price based on the market values of butter and nonfat dry milk.
The price under the order for Class I I milk presently is based on a butter- powder formula which uses an average of prices at Chicago for butter (plus 3 cents per pound) and nonfat dry milk and a “make allowance” of 80 cents per hundredweight.
A producer organization proposed that the Class I I price should at least equal the Minnesota-Wisconsin manufacturing price as reported by the Department. This was suggested as a means of increasing returns to producers. Use of this price in 1964 would have increased the actual Class I I price level by 19 cents per hundredweight. An average price increase of 24.5 cents would have prevailed during the first 8 months of 1965. (For purposes of price comparisons made herein for the months of April through August 1965, official notice is taken of the Puget Sound market administrator’s official price announcements which set forth class prices and related pricing factors for these months.)
The three major cooperative associations in the market opposed the use of the Minnesota-Wisconsin price series and contended that the Class n price should continue to be based on a butter- powder formula. They proposed a modification of the present formula which would increase the current Class I I price level by 9 cents per hundredweight. The present price computation would be changed under their proposal by deleting the addition of 3 cents to the Chicago butter price and reducing the “make allowance” to 57 cents per hundredweight. The associations stated that the Class I I price should continue to be based on the
PROPOSED RULE MAKINGmarket values of butter and powder as these are the products into which a large part of the market’s reserve milk supplies are converted. They argued that their proposal, in conjunction with the 10-cent bulk tank premium on producer milk which is being paid by all handlers, would result in the same level of returns to producers for Class n milk as would exist if the Minnesota-Wisconsin price series were adopted and the bulk tank premium were not paid.
Milk disposed of in manufactured (Class I I ) uses must be priced under the order at a level which will result in the orderly marketing of such milk. Within this concept, the price level should be that which will provide the highest possible returns to all producers in the market. At the same time the Class I I price "should reflect appropriately the competitive price structure for those milk products which are manufactured by Puget Sound handlers. In recent years less than one-half of the producer milk in this market has been needed for fluid purposes. Because of the substantial quantities of surplus milk, an appropriate Class I I price level is of particular significance to both producers and handlers.
A Class I I price based on the Minnesota-Wisconsin manufacturing m ilk price series, not to exceed a limit related to butter and nonfat dry milk values, should adequately meet these pricing objectives. The desirability of using a competitive pay price is based on the premise that in the highly competitive dairy industry average prices which are paid in areas where there is substantial competition for manufacturing milk provide as good a measure of its value as can be obtained. The Minnesota-Wisconsin price series is representative of prices paid to farmers for about one-half of the manufacturing grade milk sold in the United States. In Minnesota about 84 percent of the milk sold off farms is of manufacturing grade and in Wisconsin, about 58 percent. (Official notice is taken of the “Supplement for 1963-64 to Dairy Statistics through 1960” , Statistical Bulletin No. 303, Economic Research Service, U.S.D.A., June 1965.) There are many plants in these States which are competing for such milk supplies. This price series reflects a price level determined by competitive conditions which are affected by demand in all of the major uses of manufactured dairy products. Further, it reflects the supply and demand of manufactured dairy products within a highly coordinated marketing system which is national in scale. Milk products which are manufactured by Puget Sound handlers compete within this system.
The Minnesota-Wisconsin price .series is presently used under the order as the basic formula for establishing the price for Class I milk. Official notice is taken of the decision issued by the Assistant Secretary on November 14, 1962 (27 F.R. 11349), concerning the adoption of this price series as the basic formula price for the Puget Sound order. This decision describes the manner in which the price series is obtained.
Cooperative associations in the Puget Sound market assume the responsibility of disposing of milk not needed by other handlers for fluid and Class I I uses. The associations handle a large proportion of the Class I I milk in the market, most of which is manufactured at their plants into butter and powder. In 1964, about 42 percent of the market’s surplus milk went into these uses.
Because of the nature of their manufacturing operations, these associations expressed much concern about the relationship of the Minnesota-Wisconsin prices and the purchase prices for butter and powder. The associations contended that the Minnesota-Wisconsin price series is not sufficiently sensitive to changes in the market value of individual manufactured products, particularly butter. The divergence between the Minnesota-Wisconsin prices and the combined butter and powder product prices which has prevailed in December 1964 and the first several months of 1965 was cited as an example.
In 1962 nearly one-half qf the total production of butter and nonfat dry milk in the United States occurred in the States of Minnesota and Wisconsin. More specifically, the two States accounted for 44 percent of the total butter and 49 percent of the total nonfat dry milk that was manufactured that year. (Official notice is taken of “Agricultural Statistics 1964,” published by the U.S. Department of Agriculture.) In view of the volumes of these products involved, it is reasonable to expect that the available returns from these products would be closely reflected at most times in the pay prices of the manufacturing plants in these States.
Recognition should be given, nevertheless, to the possibility that a particular segment of the manufactured milk industry may be unduly influenced occasionally by certain supply-demand conditions not affecting the remainder of the industry. Such conditions may not be reflected sufficiently. in the Minnesota- Wisconsin price series. Because of the importance of butter and powder manufacturing in this market, it is desirable that the Puget Sound Class I I price not exceed a price level based on a butter- powder formula. Using a butter-powder price as a ceiling will insure that the Class n price will continue to reflect the product values of butter and powder in the event of an undue divergence in the relationship between such values and the Minnesota-Wisconsin prices. I f the Class n price is too high relative to the value of the residual uses for surplus milk, the associations cannot handle such milk except at a financial loss. In this circumstance, members of the associations would be penalized relative to nonmember producers on the market.
A “ceiling” .limit based on butter and powder values is used in a number of Federal order markets in connection with the use of the Minnésota-Wisconsin price for pricing milk in manufacturing uses comparable to the Puget Sound Class n uses. This price limit in such markets is equivalent to a butter-powder formula price using the product yields and prices
FEDERAL REGISTER, VOL. 31, NO. 93— FRIDAY, MAY 13, 1966
suggested by the associations, with a “make allowance” of 48 cents. This formula would provide an upper limit to the Class n price which would be appropriate for conditions prevailing in the Puget Sound market, and should be adopted for that purpose. -
Under the pricing scheme proposed herein, the Puget Sound Class I I price would have averaged $3,144 per hundredweight, or 17.6 cents over the actual average price of $2,968, for the recent 5-year period of 1960 through 1964. Annually, the spread between proposed and actual average prices would not have varied from this difference by more than 3 cents. A similar average difference of 18 cents would have prevailed also for the first 8 months in 1965.
Over the 1960-64 period, the limiting effect of the proposed butter-powder formula on the Class I I price would have been minimal. The Minnesota-Wisconsin price series averaged $3.158 in contrast to the proposed effective Class n price of $3.144 during this period, or a difference of 1.4 cents. The relationship of the Minnesota-Wisconsin prices and the combined market values of butter and powder thus has been relatively stable over an extended period of time. In light of this it is concluded that the Minnesota-Wisconsin price series would be a satisfactory basis on which to establish the Class n price for this market. The use of the proposed butter-powder formula as a price ceiling will, however, provide a proper pricing basis during those infrequent periods when significant differences between the Minnesota-Wisconsin prices and butter-powder product values prevail.
4. Computation of butterfat differentials. (a) The manner of computing the Class I and Class I I butterfat differentials to handlers should be simplified. Such differentials are provided in the order for adjusting the class prices for each one- tenth of 1 percent that the butterfat content of the milk being priced differs from 3.5 percent. Presently, the differentials are computed by adding 3 cents to the average daily wholesale price per pound for butter at Chicago, multiplying by 0.120 for Class I milk and by 0.115 for Class I I milk, and rounding the result to the nearest tenth of a cent.
Such differentials should be computed by multiplying the Chicago butter price by 0.125 for Class I milk and by 0.120 for Class I I milk, as proposed by producers. Elimination of the addition of 3 cents and adjustment of the factors of 0.120 and 0.115 to 0.125 and 0.120, respectively, would simplify the computation of the butterfat differentials without significantly affecting their present levels.
(b) A single producer butterfat differential should be applicable to all milk received from producers. The differential should be the average of the Class I and Class I I butterfat differentials to handlers weighted by the amounts of butterfat in producer milk in each class of use. When making payments to producers, prices for both base milk and excess milk would be adjusted for the butterfat content of the producer’s total deliveries by this differential.
PROPOSED RULE MAKINGThe order now provides that the uni
form price for base milk be adjusted for butterfat content by a differential which reflects the weighted average of butterfat in base milk which is assigned to each class. This differential applies on an annual basis to about 89 percent of the producer milk pooled under the order. The uniform price for excess milk is adjusted by the Class EE butterfat differential, to handlers.
The use of a single producer butterfat differential, which was proposed by producers, would simplify the computation of producer payrolls. There would be no appreciable change in returns to producers and no change in costs to handlers.
5. Definitions relating to plants— (a) “Plant.” The “plant” definition should be revised to provide that a “ reload point” not be considered as a plant if all the milk handled at such point during the month is moved to a single plant in the same pricing district.
A reload-point is used primarily as a location at which milk is transferred from one farm pickup tank truck to another or to an over-the-road tank truck for further movement from farms to plants where it is processed. Under the present provisions a reload point is considered as a plant if it has appropriate health approval and is pooled as a “country plant” when shipments of milk from it to distributing plants qualifies it as such.
A proprietary handler operating two reload points in the same district as its distributing plant requested such a change in the order. The handler moves milk handled at each reload point to this distributing plant. When all of the milk received at a reload point is so moved, the handler desires that the reload point not be considered as a plant.
Revision of the plant definition in this manner would eliminate certain records which must be kept when the reload point is treated as a pool plant and would simplify the monthly reporting of receipts and utilization. Prices to producers would not be affected inasmuch as the point of receipt of their milk would still be in the same price zone.
The buildings, premises and storage facilities of a distribution point at which packaged fluid milk products are stored en route in the course of disposition should not be considered as a part of a plant. However, for classification purposes the disposition of such products may be considered under certain conditions as taking place at the time they leave the distribution point rather than when they leave the plant where packaged as is now the case.
A handler desired that such a distribution point be considered as part of the distributing plant at which the milk is processed and packaged. It was contemplated under this arrangement that for reporting purposes fluid milk products moved through a distribution point would be considered to have been disposed of when the products left the distribution point. Proponent claimed that the records of disposition it keeps for internal accounting would then more nearly conform with the records which
7067
it would have to keep for reporting and auditing purposes under the order.
As the order is now administered, disposition takes place at the time the products leave the plant where packaged. Under the handler’s proposal, however, milk which had left the processing plant, but which had not been disposed of from the plant’s distribution point, would be considered as part of the plant’s inventory. Inasmuch as fluid milk inventories are classified as Class I milk under the Puget Sound order, classification of packaged products would be the same under either accounting procedure.
In the recommended decision it was indicated that the use under the order of only one accounting procedure for establishing the time when disposition takes place was generally desirable. It was concluded that the present accounting practice should be continued and that the order provisions should be clarified in this respect. Other than proponent, handlers apparently find the current accounting procedures satisfactory. Specific opposition to the mandatory use of proponent’s proposed accounting method was expressed by a handler which has several distribution points.
After further consideration of the record in light of exceptions received, it is concluded that the accounting method used in this circumstance should be optional with the handler. However, certain conditions should be met if a handler wishes to have final disposition occur at the time the packaged milk leaves the distribution point. The distribution point should be located west of the Cascade Mountain Range. Also, fluid milk products should not be received during the month at the distribution point from more than one plant. In addition, the handlers should notify the market administrator of his intent to report regularly on the basis of disposition from such distribution point. Such conditions would facilitate the administration of these provisions.
(b) “Pool plant.” A new “pool plant” definition with modified pooling requirements should be substituted for the present definitions of “ fluid milk plant” and “country plant.” As set forth in the attached order, plants now described as fluid milk plants would be defined as “pool distributing plants” and plants described as country plants would be defined as “pool supply plants.” Such terms are commonly used in Federal orders and aptly describe the plants being defined.
Under the present Puget Sound order plants located in the marketing area need only be approved by appropriate health authorities for receiving milk qualified for consumption as fluid milk in the marketing area (Grade A milk) in order for their receipts to be included in the marketwide pool. Those plants which dispose of any fluid milk products on routes are “ fluid milk plants” and other such plants are “country plants.” Also included as country plants are plants located outside the marketing area which either ship milk to fluid milk plants or dispose of on routes in the
FEDERAL REGISTER, VOL. 31, NO. 93— FRIDAY, MAY 13, 1966
7068
marketing area specified percentages of their receipts of Grade A milk from dairy farmers. One plant at Sequim in Clallam County is specifically designated as a country plant exempt from such performance standards. The performance standards required of out-of-area distributing plants are the same as for supply plants.
Sharing in the proceeds of the Class I utilization of a market-wide pool should be determined by the extent to which plants serve the fluid needs of the market. The marketing performance standards used for this determination at any time should be equal for all plants performing the same functions, Any plant, wherever located, should be eligible to become a pool plant if it meets such standards.
The present Puget Sound order provisions do not conform to these standards. They have worked reasonably well, though, for two reasons. The principal area of production for the market is within the marketing area, and there have been few outside milk supplies seeking entry to the Puget Sound market.
The specific amendments proposed in the notice of hearing were of a minor nature. They would incorporate into the “ fluid milk plant” definition an exemption from regulation for plants with minor route disposition in the marketing area and would designate an additional “ country plant” at Ellensburg, Wash., to be exempt from performance standards. The record shows the desirability of more uniform standards but does not provide the data upon which appropriate provisions may be based in all instances.
A pool distributing plant should be a plant from which distribution of fluid milk products in the marketing area averages more than 110 pounds daily and is 10 percent or more of the receipts of Grade A milk at the plant. A plant which distributes at least 10 percent of its receipts in the marketing area may reasonably be considered to be associated with the market to a degree that justifies its being fully regulated. Practically all distributing plants now operating in the market dispose of a much higher proportion of their receipts in the marketing area. Performance standards for distributing plants customarily require in addition that a substantial portion of receipts be disposed of on routes, either in or out of the area, in order that the plants that may qualify as distributing plants may be distinguished from those that qualify as supply plants. The record, however, does not provide sufficient basis for establishing either this qualification or uniform performance standards for all supply plants.
The order presently provides exemption from regulation for producer-handlers and nonpool plants selling not more than 3,400 pounds of fluid milk products per month in the marketing area. A uniform level of exemption from all regulation should apply to pool plants as well as to nonpool plants and producer-handlers. One hundred and ten pounds, approximately 50 quarts, daily is an appropriate standard for this purpose and is incorporated in the provisions for all three types of operations.
PROPOSED RULE MAKINGThe record does not provide sufficient
information upon which uniform performance standards for all supply plants may be established at this time. For this reason the present provisions are generally continued. The exemption from performance standards for designated plants located outside the marketing area should be discontinued, however. The Sequim plant is merely a receiving facility and substantially all of its receipts are shipped to fluid milk plants. It has met the specified performance standards at all times. While the ^Ellensburg plant has manufacturing facilities, it has continuously met the shipping requirements for pooling since becoming associated with the market in 1954,
6. Definitions of “Handler” “Producer,” and “Route disposition”— (a) “Handler.” The handler definition should be changed to include a cooperative association with respect to bulk tank milk of its member producers which is received from the farm for delivery to a pool plant of another handler in a tank truck owned and operated by, or under contract to, the association.
Changes in the methods of handling milk make desirable responsive changes in the order provisions to allow a cooperative association to act in this capacity. For many years milk was picked up at farms in cans or, more recently, in relatively small tank trucks. In those production areas somewhat distant from distributing plants, the milk was collected at supply plants and then hauled in large transport trucks to distributing plants. Today, virtually all member milk is picked up at the farm in large tank trucks and much of it is delivered to distributing plants in these same trucks. Receipt of the milk at a supply plant is often no longer a necessary step in the movement of milk from the farm to a distributing plant.
Under the present order provisions, milk moved directly from the farm to a distributing plant is considered as producer milk o f the plant operator. The operator is then the accountable handler for the milk. Cooperative associations, in marketing their members’ milk, arrange for the milk to be moved from members’ farms to the plants where needed. The order does not allow an association to be the accountable handler for milk of its members which is moved from farms directly to a distributing plant, however. Because of this it has become common practice for a cooperative association to have its pickup trucks stop, when en route from farms to distributing plants, at its supply plant where a token withdrawal of milk from the trucks is made. By establishing the supply plant as the original point of receipt, the milk is then considered as producer milk of the association. Settlement for the milk is made on the basis of an interplant transfer. The major cooperative associations in the market requested a change in the handler definition which would make such a practice unnecessary.
FEDERAL REGISTER, VOL. 31, NO. 93— FRIDAY, MAY 13
The change in the handler definition proposed herein would allow cooperative associations to move member milk directly from the farm to the plants where needed and still retain handler status with respect to the milk. Unnecessary hauling costs now incurred by the associations to establish receipt at their plant could be eliminated. Associations would have more flexibility in setting up routing arrangements which may need to vary from day to day as milk is moved to handlers’ plants in the quantities and at the times requested by such handlers.
The association should be required to notify the market administrator and the operator of the pool plant to which the milk is delivered, in writing prior to the first day of the month in which any such deliveries occur, that it elects to be the handler for such milk. In this capacity the cooperative association should report such milk as a receipt of producer milk at the location of the pool plant to which the milk is delivered and should be the responsible handler for making payments to the producers involved. The milk should be classified according to the use or disposition by the operator of the pool plant and should be assigned to the plant operator’s utilization as though the milk were producer milk of the operator. The value of the milk at class prices should be included in the plant operator’s net pool obligation. The plant operator should be required to pay the association for the milk at not less than the “weighted average price for all milk,” as adjusted by the butterfat and location differentials to producers. The plant operator also should be responsible for paying the administrative assessment applicable to such milk. In the event some of the milk for which the cooperative association is the handler is not delivered to a pool plant, the milk not delivered should be producer milk of the association in all respects.
This proposed method of accounting and paying for such milk by the handlers involved differs somewhat from the method contemplated by the proponent cooperative associations. Under their proposal, the bulk tank milk of member producers moved directly from the farm to another handler’s plant would be considered as a diversion of milk to such plant from the association’s, plant where the milk is normally received when not needed for bottling purposes. Accountability and payment for the milk under the order then would be in accordance with the rules applicable to interplant transfers of milk. Also, under their proposal the milk would be considered for pricing purposes to have been received by the association at the location of the plant which it operates if the plant to which the milk is physically delivered is subject to the same or lesser location adjustment as the association’s plant. I f a greater location adjustment is applicable, receipt would be at the plant to which the milk was delivered.
Permitting a cooperative association to be the handler for direct-delivered bulk tank milk should not be restricted to an association that operates a plant. This requirement would not offer any ad-
, 1966
vantages to an association which could not be realized under the order provisions proposed herein. Being such a handler would be optional with the association and it could choose, of course, that method of operation which best accommodates its needs. As indicated, the handler operating the plant to which the milk is delivered would be required to settle for such milk with the producer- settlement fund at the class prices and with the association involved at the weighted average price. This has the merit that any adjustments in the handler’s pool obligation which are found necessary on the basis of audit may be made directly with the handler.
In their exceptions, the proponent cooperative associations stated that if their specific proposal on this issue was not adopted they preferred no change in the present order provisions relating to cooperative associations as handlers. The use of the provisions adopted herein would be entirely optional on the part of cooperative associations. These provisions are appropriate in the circumstances where associations may wish to market member milk in this manner. The provisions are therefore retained in the proposed amended order so as to be available for use by cooperative associations.
(b) “Producer.” The producer definition should be modified to exclude any dairy farmer whose milk is diverted from a plant regulated under another order to a pool plant if the milk retains status as producer milk under such other order. Also, any dairy farmer who disposes of on a route or to consumers at the farm a daily average of more than 110 pounds of fluid milk products should not be allowed producer status under the order.
This proposal, which was made by cooperative associations in the Puget Sound market, would allow surplus milk from other federally regulated markets to be delivered directly from the farm to Puget Sound pool plants for disposal without such milk being pooled under the Puget Sound order. Producer associations in the Inland Empire market were described as occasionally having milk in excess of that which could be handled at facilities in that market. Pool plants in the Puget Sound market which have manufacturing facilities are available as an outlet for such milk. Under the present provisions, however, such milk, if moved directly from the farm to a Puget Sound pool plant, becomes pool milk under the Puget Sound order. The proponent associations which operate manufacturing plants will not accept such milk at their plants unless the milk has been received first at a plant pooled under the Inland Empire order. This has necessitated extra hauling, particularly in the case of producers in that market located in the Columbia Basin whose milk must be hauled east to a pool plant at Spokane and then west beyond the Columbia Basin area to the Puget Sound market. The movement of milk is then considered as an interorder transfer and the milk is hot pooled under the Puget Sound order. Adoption of the proposal would
PROPOSED RULE MAKINGfacilitate the economical movement and orderly disposition of the surplus milk without diluting returns to the Puget Sound producers from Class I sales in the market.
The proposed change should be limited only to milk which is classified and priced under other Federal orders. As proposed by the proponent associations, dairy farmers whose milk is diverted from unregulated distributing plants to Puget Sound pool plants for manufacturing also would be excluded from being producers. Such persons and their milk are often difficult to identify, however, in contrast to producers and producer milk as defined by an order. The movement of surplus milk from the Yakima, Washington, area, which was singled out by proponents in conjunction with this proposal, to Puget Sound pool plants on an interplant basis was described as not involving any extra hauling. No modification of the order to accommodate such milk thus appears necessary.
The exclusion from producer status of a dairy farmer selling more than 110 pounds daily of fluid milk products would affect primarily those dairy farmers who process and distribute their milk outside the marketing area through their own plant but who do not qualify as producer- handlers under the order. Presently, such persons may ship milk which is surplus to their operations to a pool plant and gain producer status. Such milk does not represent a dependable supply of milk for the fluid requirements of the Puget Sound market nor is it intended as such by the shipper. The regulated market is used merely as an outlet for milk which he produces in excess of his own Class I requirements. In this circumstance it is not appropriate that such a person share in the returns from the Class I sales of the regulated market. Similar treatment is now applicable to persons who qualify as producer-handlers under the order.
(c) “Route disposition.” A new definition of “ route disposition” should be added. As set forth' in the attached order, route disposition would mean any delivery, including delivery at a plant, plant store or eating place and delivery by a vendor or through a distribution point, of fluid milk products. A delivery of such products to a milk plant or in bulk to a commercial food processing establishment, however, would be excluded. Also, delivery to a military or other ocean transport vessel leaving the marketing area of fluid milk products which originated at a plant located outside the marketing area and were not received or processed at any pool plant would not be considered route disposition. This definition would not change in any way the present concept of what constitutes disposition on routes. It would merely simplify and clarify the remaining provisions of the order.
7. Division of the shrinkage allowance between handlers. The maximum allowance for shrinkage classified as Class n should be divided between receiving and processing handlers.
7069
Producer groups proposed that the handler who first receives milk from producers should be allowed Class n shrinkage on the milk of up to 0.5 percent of the receipts. The handler who processes the milk should be allowed up to 1.5 percent Class n shrinkage on such milk. The total Class I I shrinkage allowed under the proposal would be equal to that which is now allowed under the order. Presently, only the handler who first receives the milk may claim any Class I I shrinkage.
Division of the shrinkage allowance in this manner would be in accord with the normal expectation that greater shrinkage occurs in processing milk than in receiving milk. This arrangement would be especially appropriate in this market since milk is often received at supply plants and then moved to distributing plants for processing. The shrinkage proposal was made in conjunction with the producer proposal, which is adopted herein, that a cooperative association be permitted to be the handler on direct- delivered bulk tank milk of its member producers. Division of the shrinkage allowance is a necessary adjunct to the practical use of this option by a cooperative association.
Under this provision as set forth in the attached order, the present two percent Class I I shrinkage allowance would be retained for a plant operator who receives his milk supply directly from producers and processes it and disposes of no milk to other plants. In those circumstances where producer milk is received at a plant, or is received by a cooperative association in its capacity as a handler for bulk tank milk of its members, and is then transferred to another pool handler for processing, the total allowable shrinkage would be split. The handler receiving the milk from producers would be allowed Class I I shrinkage of up to 0.5 percent while the processing handler would be allowed Class I I shrinkage of up to 1.5 percent. Any handler diverting milk to a nonpool plant also would be allowed up to 0.5 percent shrinkage on such milk. These shrinkage limits are in line with normal experience in many federally regulated markets.
The order should provide that when a handler receives milk from a cooperative association which is the handler for bulk tank milk of its members, the entire two percent allowance accrues to the handler if he elects to purchase the milk from the association on the basis of farm weights and individual producer tests. In this case the association would have no need for a shrinkage allowance on such milk. A handler making such election should notify the market administrator to that effect. Similarly, if the operator of the nonpool plant to which milk is diverted purchases the milk on the basis of farm weights and individual producer tests, no shrinkage allowance should apply for the diverting handler.
8. Changes in the classification provisions. On the basis of proposals by certain proprietary handlers and cooperative associations, certain changes in
FEDERAL REGISTER, VOL. 31, NO. 93— FRIDAY, MAY 13, 1966
7070
the classification of milk should be made.
Cream which is transferred under certain conditions to a nonpool plant located outside the marketing area and the counties of Kitsap, Mason, Clallam, Jefferson, and Pierce should be classified as Class n milk rather than as Class I milk. Such classification should be allowed only if the nonpool plant neither distributes fluid milk products on routes nor disposes of them to other nonpool plants. Also, the market administrator must be permitted to audit the records of the nonpool plant.
A proprietary handler requested such classification for cream which it wants to ship from its pool manufacturing plant to either of its manufacturing plants at Gustine, Calif., and Johnstown, Colo. The cream becomes available through the standardization of milk for its evaporated milk operation at the pool plant. The distant plants named have only manufacturing operations.
Cream disposed of outside the market in this manner should be classified as Class n milk. Returns to producers would not be affected in any manner. Proponent, on the other hand, would have greater latitude in utilizing its available facilities. A substantial decrease in the number of available butter churning facilities in the market further supports this action.
Any milk or milk products sterilized and packaged in hermetically sealed glass containers should be classified as Class I I milk. This classification is now applicable to milk so packaged in metal containers. A proprietary handler which regularly ships milk and milk products to Alaska requested this modification. The handler contemplates moving through its pool plant a sterilized, hermetically sealed cream product packaged in glass containers. The product is packaged in California and would be consolidated at the handler’s plant with other milk products for shipment to Alaska. There is no need to differentiate between sterile products packaged in metal containers and such products in glass containers. The classification provisions should be changed accordingly.
A further change regarding the classification of milk sterilized and packaged in hermetically sealed containers which was proposed by producer groups should not be adopted. Under their suggested classification provisions, as set forth in the hearing notice, such milk, except evaporated milk, would be classified as Class I rather than Class n unless disposed of outside the marketing area. No justification for this change was given at the hearing and the change should not be made.
The producer proposal that fluid milk products which are dumped be classified as Class I I milk should be adopted. Under normal circumstances handlers experience some spoilage „of fluid milk products for which there is no commercial value This occurs particularly with route returns of packaged products. Occasionally, milk which is being processed into cottage cheese will not “set” and must be dumped. Accordingly, such milk
PROPOSED RULE MAKINGshould not be valued under the order at the Class I price. The order should provide that the handler give such prior notice and opportunity for verification as may be required by the market administrator before such dumping occurs.
The classification provisions should be modified to provide that fluid milk products be classified as Class I I milk if disposed of in bulk to any type of commercial food processing establishment for use in food products which are processed for general distribution to the public for consumption off the premises. Such an establishment would exclude any facility, such as various types of catering kitchens and kitchens of restaurant chains, at which the principal function is the preparation of food or meals for use within a limited period of time. The order now limits such establishments to bakeries, soup companies and candy manufacturing establishments. '
This change would allow a Class I I classification on sour cream disposed of in bulk to manufacturers of salad dressings. A witness for the principal producer group indicated that this classification change is desirable since such manufacturers represent an important outlet for producer milk. He indicated that sour cream cannot compete for these outlets whei. priced at the higher class value. Such disposition of sour cream is similar to disposition of fluid milk products for bakery, soup and candy uses and should be treated similarly.
9. Accounting for nonfluid milk prod- ucts used for reconstitution and fortification of fluid milk products. The order should be clarified as to the manner in which handlers should account for nonfat milk solids used for fortifying fluid milk products. The order presently does not set forth clearly the accounting procedure to be used. Producers proposed that the market administrator’s instructions to handlers concerning this matter be incorporated in the order.
Any fluid milk products fortified with added nonfat milk solids should be Class I milk in an amount equal only to the weight of an equal volume of a like unmodified product of the same butterfat content. The reportable quantity of nonfluid milk products used for fortification should be a weight equal to the increase in volume of the fluid milk products caused by the addition of the fortifying product. This quantity of nonfluid milk products should be reported as a receipt of other source milk.
This manner of accounting for nonfat milk solids is now being used to implement the classification and pricing of producer milk under the order. Setting forth in the order the specific accounting procedures for fortified products would facilitate the administration of the order.
The order also should be modified with respect to accounting for nonfluid milk products used in reconstituting fluid milk products. The order now provides that when skim milk or milk drinks are reconstituted the volume of the nonfluid milk products used shall be equivalent to the skim milk used to produce the non
fluid milk product«. This accounting procedure should be used in the case of all reconstituted fluid milk products. The fluid milk equivalent of the nonfat milk solids used for reconstitution would be considered as other source milk.
Nonfluid milk products are ordinarily derived from unpriced milk or milk which has been priced as surplus milk under a Federal order. , An economic incentive exists for handlers to substitute reconstituted fluid milk products for fluid milk products processed from current receipts of producer milk. Since such substitution would displace an equivalent amount of producer milk in Class I, the application of fluid equivalent pricing to all types of reconstituted fluid milk products is appropriate.
10. Suspension or modification of the base-excess plan.
(a) The base-excess plan used for distributing returns to producers should be continued.
A relatively small number of producers affiliated with a national farm organization proposed that the base-excess plan now provided for in the order be suspended for a trial period of 2 years beginning January 1, 1966. During this period a substitute base plan would be used which, in essence, would relate producers’ bases to Class I utilization in the market. The producers contended that the present base-excess plan no longer is serving a useful purpose. They claimed that the plan induces the production of additional unneeded milk as producers attempt to establish larger bases.
Aside from the issue of whether the present base-excess plan is appropriate, consideration of the substitute base plan suggested by producers is not warranted. The order provisions which would be needed to implement such a plan were not developed sufficiently at the hearing to allow adequate appraisal of it. Furthermore, most of the Puget Sound producers were not aware that a base plan of this nature was to be considered at this proceeding inasmuch as the plan was not set forth in the notice of hearing. All producers in the market should have full opportunity to develop the necessary provisions of any base plan which might be adopted.
The purpose of the base-excess plan in the Puget Sound order has been to encourage a more even seasonal pattern of milk production. The normal pattern usually results in a greater supply of milk in the spring and early summer months. The base-excess plan has been in effect since the beginning of the order in 1951. Data for the market indicate a leveling of the seasonal variation in production since that time. In 1952 the average daily delivery per producer in the month of greatest production was 53 percent more than in the month of least production. For 1958 and 1964 comparable figures are 36 percent and 23 percent, respectively. It must be assumed that the base-excess plan has been a major factor in the changing production pattern for this market.
It cannot be determined that there is any direct relationship between this base-excess plan and the substantial
FEDERAL REGISTER) VOL. 31, NO. 93—-FRIDAY, MAY 13, 1966
amount of surplus milk in this market. Changes in technology and feeding and breeding practices cannot be overlooked as contributing significantly to the more than twofold increase since 1952 in the average daily delivery per producer. Withdrawing the base-excess plan on the basis that it contributes to excess production cannot be justified sufficiently to warrant such action.
The base-excess plan is a means of distributing to producers the total returns for their milk pooled under the order. Handlers’ costs are not affected by the plan. Considerable weight, therefore, should be given to the desire of producers in the market as to whether they want such a plan. A large segment of such producers expressed opposition to the proposal to suspend the plan. They contended that the plan has been effective in leveling the seasonal variation of production.
In view of these considerations, the proposal is denied.
(b) No change should be made in certain parts of the provisions relating to the base-excess plan as suggested by cooperative associations. Producers proposed that any milk produced by a producer but which is not delivered to a plant because of circumstances generally beyond his control should be included in his total volume of milk used in computing his base. Also, they proposed that the order specify that a base may be computed for a producer-handler who discontinues operations as such or fails to meet the requirement for handler status.
Since the hearing was held, the Agricultural Marketing Agreement Act has been amended. Certain of the changes to the statute relate to the specific provisions which authorize base-excess plans such as is in the Puget Sound order. At the time producers were proposing certain changes in the base-excess plan, they were not aware, of course, of the forthcoming changes in the Act. Since the evidence offered in support of these proposals for relatively minor changes in the base-excess plan was given without knowledge of the statutory change in procedures, it is concluded that a decision on these proposals should not be made on the basis of this record.
11. Miscellaneous changes.(a) Reports of receipts and utilization
which handlers must submit to the market administrator each month should be required to be submitted in the detail and on forms prescribed by the market administrator. This requirement, which has been set forth in the order since its inception, was omitted when the order was amended effective August 1, 1964. Reinstatement of the requirement will assure uniformity in reporting procedures and facilitate the classification and pricing of milk.
(b) A proposal was made by cooperative associations which would restate in conformance with other proposals the order language relating to location adjustments on Class I I milk. During consideration of this proposal at the hearing, a proprietary handler proposed that the amount of adjustment be changed. Presently, a plus 25-cent location ad-
PROPOSED RULE MAKINGjustment is applicable at pool plants located in District 1 or in the counties of Kitsap, Mason, or Pierce on milk which is utilized in certain Class I I products, principal of which are ice cream and cottage cheese. It was proposed that this location adjustment be reduced to 15 cents per hundredweight.
The evidence is inconclusive as to whether a location adjustment other than that presently used would be appropriate under existing marketing conditions. Questions raised in the record concerning this issue, such as (1) the availability of milk for Class I I use at) District 1 plants at a lesser location adjustment, (2) the quantities of milk which must be shipped from supply plants to District 1 distributing plants for “premium” Class n uses, and (3) current transportation costs, suggest that a more thorough review be given the matter than occurred at the hearing. Accordingly, this change is not adopted.
(c) The market administrator should be required to report to a cooperative association, at the latter’s request, the pro rata share of a handler’s Class n utilization subject to a location adjustment which is assignable to milk of member producers caused to be delivered by the association directly from farms to the handler’s plant. Such milk should include any bulk tank milk for which a cooperative association is the handler. Under present provisions a cooperative association may obtain similar information with respect to a handler’s utilization of such milk in each class but without a detailed breakdown of the Class n uses.
As indicated above, milk used in certain Class n products at certain pool plants is subject to a plus 25-cent per hundredweight location adjustment. Knowing how much o f its milk is used in these particular Class I I products may assist the association in allocating available supplies of milk to handlers to the best advantage of the association. Confidentiality of the handler’s operations would not be jeopardized under this arrangement.
(d) The order should provide that in the absence of specific tests the butterfat content of skim milk which a handler receives, uses or disposes of shall be 0.06 percent. Currently, if no butterfat test has been made the test of the skim milk is assumed to be zero. No practical method of separation removes all of the butterfat from milk, however. Thus, if the butterfat test of the skim milk which remains is considered as zero, a problem of accounting for all butterfat received may result. When large quantities of skim milk are involved, a handler may experience excessive shrinkage or some overage of butterfat. The application of an assumed butterfat test would tend to mitigate the problem. A test of 0.06 percent appears appropriate for this purpose. ^
(e) The order now provides that reporting of receipts and utilization and classification and assignment of milk shall be done on the basis of each plant which a handler operates. However, if a handler operates more than one pool plant and receives bulk fluid milk prod-
7071
ucts from an unregulated supply plant or an other order plant which are to be assigned pro rata to his utilization, such assignment is based on the overall utilization of milk of all the pool plants of the handler. This arrangement may necessitate “borrowing” utilization from one plant for assignment purposes in another of the handler’s plants.
This procedure is simplified in the attached order. It is provided that after classification of milk at each of the handler’s pool plants is made, the utilization in each class at all of the plants shall be combined before assigning receipts of milk to the handler’s utilization. I f the handler has not received any other source milk which is subject to a pro rata assignment, assignment of receipts would be done on an individual plant basis.
(f ) The entire order should be rewritten. The adoption of various proposals necessitates, of course, certain changes in the specific provisions involved. In addition, changes in other provisions are required to make the entire order conform with the amendments proposed herein. In view of the extensive changes, this occasion is an appropriate time for redrafting the entire order for the purpose of providing greater clarity in all provisions.
Rulings on proposed findings and conclusions. Briefs and proposed findings and conclusions were filed on behalf of certain interested parties. These briefs, proposed findings and conclusions and the evidence in the record were considered in making the findings and conclusions set forth above. To the extent that the suggested findings and conclusions filed by interested parties are inconsistent with the findings and conclusions set forth herein, the requests to make such findings or reach such conclusions are denied for the reasons previously stated in this decision.
General findings. The findings and determinations hereinafter set forth are supplementary and in addition to the findings and determinations previously made in connection with the issuance of the aforesaid order and of the previously issued amendments thereto; and all of said previous findings and determinations are hereby ratified and affirmed, except insofar as such findings and determinations may be in conflict with the findings and determinations set forth herein.
(a ) The tentative marketing agreement and the order, as hereby proposed to be amended, and all of the terms and conditions thereof, will tend to effectuate the declared policy of the Act;
(b) The parity prices of milk as determined pursuant to section 2 of the Act are not reasonable in view of the price of feeds, available supplies of feeds, and other economic conditions which affect market supply and demand for milk in the marketing area, and the minimum prices specified in the proposed marketing agreement and the order, as hereby proposed to be amended, are such prices as will reflect the aforesaid factors, insure a sufficient quantity of pure and wholesome milk, and be In the public Interest; and
No. 93------ 7FEDERAL REGISTER, VOL. 31, NO. 93— FRIDAY, MAY 13, 1966
7072 PROPOSED RULE MAKING(c) The tentative marketing agree
ment and the order, as hereby proposed to be amended, will regulate the handling of milk in the same manner as, and will be applicable only to persons in the respective classes of industrial and commercial activity specified in, a marketing agreement upon which a hearing has been held.
Rulings on exceptions. In arriving at the findings and conclusions, and the regulatory provisions of this decision, each of the exceptions received was carefully and fully considered in conjunction with the record evidence pertaining thereto. To the extent that the findings and conclusions, and the regulatory provisions of this decision are at variance with any of the exceptions, such exceptions are hereby overruled for the reasons previously stated in this decision.
Marketing agreement and order. Annexed hereto and made a part hereof are two documents entitled, respectively, “Marketing Agreement Regulating the Handling of Milk in the Puget Sound, Wash., Marketing Area” , and “Order Amending the Order Regulating the Handling of Milk in the Puget Sound, Wash., Marketing Area” , which have been decided upon as the detailed and appropriate means of effectuating the foregoing conclusions.
I t is hereby ordered, That all of this decision, except the attached marketing agreement, be published in the Federal R egister. The regulatory provisions of said marketing agreement are identical with those contained in the order as hereby proposed to be amended by the attached order which will be published with this decision.
Referendum order; determination of representative period; and designation of referendum agent. It. is hereby directed that a referendum be conducted to determine whether the issuance of the attached order regulating the handling of milk in the Puget Sound, Wash., marketing area, is approved or favored by the producers, as defined under the terms of the order as amended and as hereby proposed to be amended, and who, during the representative period were engaged in the production of milk for sale within the aforesaid marketing area.
The month of January 1966 is hereby determined to be the representative period for the conduct of such referendum.
Nicholas L. Keyock is hereby designated agent of the Secretary to conduct such referendum in accordance with the procedure for the conduct of referenda to determine producer approval of milk marketing orders (30 FJR. 15412), such referendum to be completed on or before the 30th day from the date this decision is issued.
Signed at Washington, D.C., on May 10, 1966. C
G eorge L. M ehren, Assistant Secretary.
Order1 amending the order regulating the handling of milk in the Puget Sound,Wash., marketing area
Sec. Definitions1125.1 Act.1125.2 Secretary.1125.3 Department.1125.4 Person.1125.5 Cooperative association.1125.6 Puget Sound, Wash.,' marketing
area.1125.8 Pool plant.1125.9 Nonpool plant.1125.10 Handler.1125.11 Producer.1125.12 Producer milk.1125.13 Other source milk.1125.14 Producer-handler.1125.15 Fluid milk product.1125.16 Route disposition.1125.17 Base.1125.18 Base milk and excess milk.1125.19 Chicago butter price.
Market Administrator
1125.20 Designation.1125.21 Powers.1125.22 Duties.
Reports, Records, and Facilities
1125.30 Monthly reports of receipts and utilization.
1125.31 Payroll reports.1125.32 Other reports.1125.33 Records and facilities.1125.34 Retention of records.1125.35 Handler report to producers.
Classification
1125.40 Skim milk and butterfat to be classified.
1125.41 Classes of utilization.1125.42 Shrinkage.1125.43 Responsibility of handlers and
reclassification of milk.1125.44 Interplant movements.1125.45 Computation of skim milk and
butterfat in each class.1125.46 Allocation of skim milk and but
terfat classified.Min im um Prices
1125.50 Basic formula price.1125.51 Class prices.1125.52 Butterfat differentials to handlers.1125.53 Location adjustments on Class I
milk.1125.54 Location adjustments on Class H
milk.1125.55 Use of equivalent prices.
Determination of Base
1125.60 Computation of producer bases.1125.61 Base rules.
A p p l i c a b i l i t y o p P r o v is io n s
1125.65 Producer-handlers.1125.66 Plants subject to other Federal
orders.1125.67 Obligations of handler operating a
partially regulated distributing plant.
D e t e r m i n a t i o n o f U n i f o r m P r ic e s
1125.70 Computation of the net pool obligation of each pool handler.
1125.71 Computation of weighted averageprice for all milk.
1125.72 Computation of uniform prices forbase milk and excess milk.
P a y m e n t s
1125.80 Time and method of payment to producers and to cooperative associations.
1 This order shall not become effective unless and until the requirements of § 900.14 of the rules of practice and procedure governing proceedings to formulate marketing agreements and marketing orders have been met.
Sec.1125.81 Location adjustments to producers
and on nonpool milk.1125.82 Producer butterfat differential.1125.83 Producer-settlement fund.1125.84 Payments to the producer-settle
ment fund.1125.85 Payments out of the producer-
settlement fund.1125.86 Adjustments of accounts.1125.87 Marketing services.1125.88 Expense of administration.1125.89 Termination of obligations.
Effective T ime, Suspension, or Termination
1125.90 Effective time.1125.91 Suspension or termination.1125.92 Continuing obligations.1125.93 Liquidation.
Miscellaneous Provisions
1125.100 Agents.1125.101 Separability of provisions.
Authority : The provisions of this Part1125 issued under secs. 1-19, 48 Stat. 31, as amended; 7 U.S.C. 601-674.
§ 1125.0 Findings and determinations.The findings and determinations here
inafter set forth are supplementary and in addition to the findings and determinations previously made in connection with the issuance of the aforesaid order and of the previously issued amendments thereto; and all of said previous findings and determinations are hereby ratified and affirmed, except insofar as such findings and determinations may be in conflict with the findings and determinations set forth herein.
(a) Findings upon the basis of the hearing record. Pursuant to the provisions of the Agricultural Marketing Agreement Act of 1937, as amended (7 U.S.C. 601 et seq.), and the applicable rules of practice and procedure governing the formulation of marketing agreements and marketing orders (7 CFR Part 900), a public hearing was held upon certain proposed amendments to the tentative marketing agreement and to the order regulating the handling of milk in the Puget Sound, Wash., marketing area. Upon the basis of the evidence introduced at such hearing and the record thereof, it is found that:
( 1 ) The said order as hereby amended, and all of the terms and conditions thereof, will tend to effectuate the declared policy of the Act;
(2) The parity prices of milk, as determined pursuant to section 2 of the Act, are not reasonable in view of the price of feeds, available supplies of feeds, and other economic conditions which affect market supply and demand for milk in the said marketing area, and the minimum prices specified in the order as hereby amended are such prices as will reflect the aforesaid factors, insure a sufficient quantity of pure and wholesome milk, and be in the public interest;
(3) The said order as hereby amended, regulates the handling of milk in the same manner as, and is applicable only to persons in the respective classes of industrial or commercial activity specified in, a marketing agreement upon which a hearing has been held;
(4) All milk and milk products handled by handlers, as defined in the
FEDERAL REGISTER, VOL. 31, NO. 93— FRIDAY, MAY 13, 1966
PROPOSED RULE MAKING 7073
order as hereby amended, are in the current of interstate commerce or directly burden, obstruct, or affect interstate commerce in milk or its products; and
(5) It is hereby found that the necessary expense of the market administrator for the maintenance and functioning of such agency will require the payment by each handler, as his pro rata share of such expense, 4 cents per hundredweight, or such amount not to exceed 4 cents per hundredweight as the Secretary may prescribe, with respect to (a) producer milk (including such handler’s own production), (b) other source milk allocated to Class I pursuant to § 1125.46(a) (3) and (6) and the corresponding steps of § 1125.46 .(b). and (c) packaged Class I milk disposed of on routes within the marketing area from a partially regulated distributing plant which exceeds Class I milk received during the month at such plant from pool plants and other order plants.
Order relative to handling. I t is therefore ordered, that on and after the effective date hereof the handling of milk in the Puget Sound, Wash., marketing area shall be in conformity to and in compliance with the terms and conditions of the aforesaid order, as amended and as hereby amended, as follows:
The provisions of the proposed marketing agreement and order amending the order contained in the recommended decision issued by the Deputy Administrator, Regulatory Programs, on December 2,1965, and published in the Federai, Register on December 8, 1965 (30 F.R. 15152 ; F.R. Doc. 65-13098) shall be and are the terms and provisions of this order, and are set forth in full herein, subject to the following modifications.
Changes are made in §§ 1125.7(b), 1125.15, 1125.16(b), 1125.22Ü), 1125.41(b ) (3), 1125.45 (a ) and (c), 1125.46(a)(6) and (7), 1125.51(a), 1125.61 (b) and(d ), and 1125.66(a).
Definitions
§ 1125.1 Act.“Act” means Public Act No. 10, 73d
Congress, as amended, and as reenacted and amended by the Agricultural Marketing Agreement Act of 1937, as amended (48 Stat. 31, as amended; 7 U.S.C. 601 et seq.).§ 1125.2 Secretary.
“ Secretary” means the Secretary of Agriculture, or other officer or employee of the United States authorized to exercise the- powers or to perform the duties of the said Secretary of Agriculture.§ 1125.3 Department.
“Department” means the U.S. Department of Agriculture or such other Federal agency authorized to perform the price reporting functions specified in this part.§ 1125.4 Person.
“Person” means any individual, partnership, corporation, association, or any other business unit.§1125.5 Cooperative association.
“Cooperative association” means any cooperative marketing association of producers, duly organized as such under the
laws of any State, which includes members who are producers as defined in § 1125.11 and which the Secretary determines, after application by the association:
(a ) To be qualified under the standards set forth in the act of Congress of February 18, 1922, as amended, known as the “Capper-Volstead Act” ;
(b) To have its entire organization and all of its activities under the control of its members; and
(c) To be currently-engaged in making collective sale of or marketing milk or its products for its members.§ 1125.6 Puget Sound, Wash., market
ing area.“Puget Sound, Wash., marketing area”
(hereinafter called the “marketing area” ) means all territory geographically within the places listed below, including all territory wholly or partly therein occupied by government (municipal, State or Federal) reservations, facilities, installations or institutions:
Washington Counties
Grays Harbor.Island.King.Lewis (except the town of Vader).Pacific (all territory north of township 11 N
except Long Island and the North BeachPeninsula).
Pierce (except Fox, McNeil, and AndersonIslands and the peninsulas adjacent to Kitsap County).
San Juan.Skagit.Snohomish.Thurston.Whatcom.
“District 1” shall include that portion of the marketing area in Grays Harbor, King, Pierce, Snohomish, and Thurston Counties. “District 2” shall include Whatcom County. “District 3” shall include that portion of the marketing area in Lewis and Pacific Counties. “District 4” shall include Skagit and Island Counties. “District 5” shall include San Juan County.§ 1125.7 Plant.
“Plant” means the land, buildings, surroundings, facilities and equipment, whether owned or operated by one or more persons, constituting a single operating unit or establishment, which is maintained and operated primarily for the receiving, handling and/or processing of milk and milk products.
(a) The buildings, premises and facilities, including facilities for washing tanks, of a reload point used primarily as a location at which milk is transferred from one farm pickup tank truck to another or to an over-the-road tank truck, and approved for such use by an appropriate health authority, shall constitute a plant, unless all milk handled through such reload point during the month is moved to a single plant in the same district. Any reload point on the premises of a plant engaging in other operations shall constitute a part of the operations of such plant.
(b) The buildings, premises and storage facilities of a distribution point at which are stored en route in the course
of disposition fluid milk products that have been processed and packaged in consumer-type packages at a distributing plant shall not constitute a plant. Operations of such a distribution point located on the premises of a nonpool plant or a supply plant shall not constitute a part of the operations of such plant. Fluid milk products moved through a distribution point shall be classified on the basis of disposition from the distributing plant at which processed and packaged, unless the following conditions are met, in which case such products may be classified on the basis of disposition from such distribution point:
(1) Such distribution point is located west of the Cascade Mountain Range;
(2) Fluid milk products are not received during the month at such distribution point from more than one plant; and
(3) The handler operating such distributing plant notifies the market administrator of his intent to report regularly on the basis of disposition from such distribution point.§ 1125.8 Pool plant.
“Pool plant” means any plant, other than an other order plant or the plant of a producer-handler, approved by a health authority having jurisdiction in the marketing area for receiving, processing or packaging of milk qualified for distribution as Grade A milk, which meets the conditions of paragraph (a) or (b) of this section:
(a) Any such plant, hereinafter referred to as a “ pool distributing plant” , from which during the month route disposition of fluid milk products in the marketing area averages more than 110 pounds daily and is also 10 percent or more of receipts of Grade A milk at such plant; or
(b) Any other such plant (including any reload point constituting a plant), hereinafter referred to as a “pool supply plant” , a t which milk so qualified is received from dairy farmers or a cooperative association pursuant to § 1125.- 10(1), and which is:
(1) Located in the marketing area; or(2) Located outside the marketing
area, and from which is moved in fluid form as milk to a pool distributing plant at least the following applicable percentage of both the skim milk and butterfat in Grade A milk received from dairy farmers:
(i) During the months of October through December, 50 percent of such receipts during the month; or
(ii) During the months of January through September, 20 percent of such receipts during the month, except that any plant which shipped more than 50 percent of such receipts during the entire period of October through December immediately preceding shall be a pool plant for each of the months of January through September.
(3) Any plant which otherwise meets the requirements of this paragraph may withdraw from pool supply plant status for any month in the January-Septem- ber period if the operator of the plant files with the market administrator,
FEDERAL REGISTER, VOL. 31, NO. 93— FRIDAY, MAY 13, 1966
7074 PROPOSED RULE MAKINGprior to the first day of such month, a written request for such withdrawal.§1125.9 Nonpool plant.
“Nonpool plant” means any plant other than a pool Riant. The following categories of nonpool plants are further defined as follows:
(a) “ Other order plant” means a plant that is fully subject to the pricing and pooling provisions of another order issued pursuant to the Act.
(b) “Producer-handler plant” means a''plant operated by a producer-handler as defined in any order (including this part) issued pursuant to the Act.
(c) “Partially regulated distributing plant” means a nonpool plant that is neither an other order plant nor a producer-handler plant, fiom which during the month an average of more than 110 pounds daily of fluid milk products is disposed of on routes in the marketing area.
(d) “ Unregulated supply plant” means a nonpool plant that is neither an other order plant nor a producer-handler plant, from which fluid milk products qualified for distribution as Grade A milk are moved to a pool plant during the month.§ 1125.10 Handler.
“ Handler” means any person in his capacity as:
(a) The operator of one or more pool plants;
(b) The operator of a partially regulated distributing plant;
(c) The operator of an other order plant from which fluid milk products are disposed of on a route in the marketing area;
(d) A producer-handler;(e) Any cooperative association with
respect to milk of its member producers caused to be diverted for the account of such cooperative association from a pool plant of another handler to a nonpool plant; or
(f ) Any cooperative association with respect to milk of its member producers which is received from the farm for delivery to the pool plant of another handler in a tank truck owned and operated by, or under contract to, such cooperative association, i f the cooperative association notified the market administrator and the operator of the pool plant to whom the milk is delivered, in writing prior to the first day of the month in which the milk is delivered, that it elects to be the handler for such milk. For purposes of location adjustments to producers such milk is considered to have been received from producers by the cooperative association at the location of the pool plant to which it is delivered.§ 1125.11 Producer.
“Producer” means any person engaged in the production of milk of dairy cows:
(a) Who produces such milk in compliance with the Grade A inspection requirements of a duly constituted health authority;
(b) Whose milk during the month is received at a pool plant or is diverted from a pool plant to a nonpool plant pur
suant to § 1125.12, unless such milk is received at a pool -plant by diversion from an other order plant and retains status as producer milk under the order by which such plant is regulated;
(c) Who is not a producer-handler as defined in any order (including this part) issued pursuant to the Act; and
(d) Who during the month has not disposed of on a route or to consumers at the farm an average of more than 110 pounds daily of fluid milk products.§1125.12 Producer milk.
“Producer milk” or “milk received from producers” means skim milk and butterfat in milk produced by producers which is received for the account of a handler as follows:
(a) With respect to receipts at a pool plant, producer milk shall include:
(1) Milk received at such plant directly from producers;
(2) Milk diverted from such pool plant to a nonpool plant for the account of the operator of the pool plant, subject to the condition set forth in paragraph(c) of this section; and
(3) Milk received at such pool plant from a cooperative association in its capacity as a handler pursuant to § 1125.10(f), for all purposes other than those specified in paragraph (b) (2) (i) of this section;
(b) With respect to milk for which a cooperative association is a handler in a capacity other than as the operator of a pool plant, producer milk shall include:
(1) Milk diverted from the pool plant of another handler to a nonpool plant for the account of the cooperative association, subject to the condition set forth in paragraph (c) of this section; and
(2) Milk for which the cooperative association is a handler pursuant -to § 1125.10(f) to the following extent:
(i) For purposes of reporting pursuant to §§ 1125.30(c) and 1125.31(a) and making payments to producers pursuant to § 1125.80(a); and
(ii) For all purposes, with respect to any such milk which is not delivered to the pool plant of another handler; and
(c) For purposes of location adjustments pursuant to §§ 1125.53,1125.54 and 1125.81, milk diverted to a nonpool plant shall be priced at the location of the plant to which diverted.§1125.13 Other source milk.
“Other source milk” means all skim milk and butterfat contained in:
(a) Receipts during the month of fluid milk products from any source (including all receipts in fluid form from a producer-handler or the plant of a producer- handler as defined under this or any other Federal order) except:
(1) Producer milk; and(2) Receipts from other pool plants;
and(b) Nonfluid and residual products
(including those processed at the plant) which are reprocessed in connection with, or converted to, a fluid milk product during the month. The skim milk component of such products shall be as follows:
(1 ) A weight equal to the weight of the volume increase caused by nonfat milk solids in dry milk solids or condensed milk or skim milk products used for the fortification of, or as an additive to, fluid milk products; and
(2) The weight of a volume equivalent to the skim milk used to produce such product, with respect to other such products or uses.§ 1125.14 Producer-handler.
“Producer-handler” means a person who is engaged in the production of milk and also operates a plant from which during the month an average of more than 110 pounds daily of fluid milk products is disposed of on a route (s) within the marketing area and who has been so designated by the market administrator upon his determination that all of the requirements of this section have been met, and that none of the conditions therein for cancellation of such designation exists. All designations shall remain in effect until cancelled pursuant to paragraph (c) of this section. The Department of Institutions, State of Washington, shall be a producer-handler exempt from the provisions of this section and §§ 1125.30 and 1125.32 with respect to milk of its own production and receipts from pool plants processed or received for consumption in State institutions and with respect to movements of milk to or from a pool plant.
(a) Requirements for designation. (1) The producer-handler has and exercises (in his capacity as a handler) complete and exclusive control over the operation and management of a plant at which he handles and processes milk received from his milk production resources and facilities (designated as such pursuant to paragraph (b )(1 ) of this section), the operation and management of which are under the complete and exclusive control of the producer-handler (in his capacity as a dairy farm er).
(2) The producer-handler neither receives at his designated milk production resources and facilities nor receives, handles, processes or distributes at or through any of his milk handling, processing or distributing resources and facilities (designated as such pursuant to paragraph (b) (2) of this section) fluid milk products derived from any source other than (i) his designated milk production resources and facilities, (ii) pool plants within the limitation specified in paragraph (c) (2) of this section, or (iii) nonfat milk solids which are used to fortify fluid milk products.
(3) The producer-handler is neither directly or indirectly associated with the business control or management of, nor has a financial interest in, another handler’s operation; nor is any other handler so associated with the producer-handler’s operation.
(4) Designation of any person as a producer-handler following a cancellation of his prior designation shall be preceded by performance in accordance with subparagraphs (1 ); (2 ), and (3) of this paragraph for a period of 1 month.
(b) Resources and facilities. Designation of a person as a producer-handler
FEDERAL REGISTER, VOL. 31, NO. 93— FRIDAY, MAY 13, 1966
PROPOSED RULE MAKING 7075
shall include the determination and designation of the milk production, handling, processing and distributing resources and facilities, all of which shall be deemed to constitute an integrated operation, as follows:
(1) As milk production resources and facilities: All resources and facilities (milking herd(s), buildings housing such herd(s), and the land on which such buildings are located) used for the production of m ilk:,
(1) Which are directly, indirectly or partially owned, operated or controlled by the producer-handler;
(ii) In which the producer-handler in any way has an interest including any contractual arrangement; and
(iii) Which are directly, indirectly or partially owned, operated or controlled by any partner or stockholder of the producer-handler: Provided, That for purposes of this subparagraph any such milk production resources and facilities which the producer-handler proves to the satisfaction of the market administrator do not constitute an actual or potential source of milk supply for the producer- handler’s operation as such shall not be considered a part of his milk production resources and facilities; and
(2) As milk handling, processing and distributing resources and facilities: All resources and facilities including store outlets) used for handling, processing and distributing within the marketing area any fluid milk product:
(i) Which are directly, indirectly or partially owned, operated or controlled by the producer-handler; or
(ii) In which the producer-handler in any way has an interest, including any contractual arrangement, or with respect to which the producer-handler directly or indirectly exercises any degree of management or control.
(c) Cancellation. The designation as a producer-handler shall be cancelled under any of the conditions set forth in subparagraphs (1) and (2) of this paragraph, or upon determination by the market administrator that any of the requirements of subparagraphs (1 ), (2), and (3) of paragraph (a) of this section are not continuing to be met, such cancellation to be effective on the first day of the month following the month in which the requirements were not met, or the conditions for cancellation occurred.
(1) Milk from the designated milk production resources and facilities of the producer-handler is delivered in the name of another person as producer milk to another handler.
(2) The producer-handler handles fluid milk products derived from sources other than the designated milk production facilities and resources, with the exception of purchases from pool plants in the form of packaged fluid milk products, other than whole milk, which do not exceed a daily average during the month of 100 pounds.
(d) Public announcement. The market administrator shall publicly announce the name, plant location and farm location (s) of persons designated as producer-handlers, of those whose designations have been cancelled, and
the effective dates of producer-handler status or loss of producer-handler status for each. Such announcements shall be controlling with respect to the accounting at plants of other handlers for milk received from any producer-handler. H *
(e) Burden of establishing and maintaining producer-handler status. The burden rests upon the handler who is designated as a producer-handler to establish through records required pursuant to § 1125.33 that the requirements set forth in paragraph (a ) of this section have been and are continuing to be met, and that the conditions set forth in paragraph (c) of this section for cancellation of designation do not exist.§ 1125.15 Fluid milk product.
“Fluid milk product” means the following, in fluid or frozen form:
(a ) Milk, skim milk, skim milk drinks, buttermilk, flavored milk, and flavored milk drinks (including such products reconstituted or fortified with additional nonfat milk solids) ;
(b) Concentrated milk, skim milk, flavored milk, and flavored milk drinks; and
(c) Cream (sweet or sour) and any mixtures of cream and milk or skim milk (exclusive of ice cream and frozen dessert mixes, cocoa mixes, aerated cream products, and eggnog).
Fluid milk products shall not include those products commonly known as evaporated milk, condensed milk, and skim milk (plain or sweetened), yogurt, starter, or any milk or milk products sterilized and packaged in hermetically sealed metal or glass containers.§1125.16 Route disposition.
“Route disposition” means any delivery of fluid milk products (including delivery at a plant, plant store, or eating place and delivery by a vendor or through a distribution point) except :
(a) A delivery to a plant;(b) A delivery in bulk to a commer
cial food processing establishment pursuant to § 1125.41(b) (3) ; or
(c) A delivery to a military or other ocean transport vessel leaving the marketing area of fluid milk products which originated at a plant located outside the marketing area and were not received or processed at any pool plant.§ 1125.17 Base.
“Base” means a quantity of milk, expressed in pounds per day or per month, computed pursuant to § 1125.60 (a) and (b ), respectively.§1125.18 Base milk and excess milk.
(a) “Base milk” means milk delivered by a producer during the month which is not in excess of :
(1) His daily base computed pursuant to § 1125.60(a) multiplied by the number of days of delivery in such month; or
(2) His monthly base computed pursuant to § 1125.60(b) ; Provided, That with respect to any producer with “ every- other-day” delivery of milk the days of nondelivery shall be considered as days of delivery for the purposes of this section and of § 1125.60(a).
(b) “Excess milk” means milk delivered by a producer in excess of base milk.§ 1125.19 Chicago butter price.
“Chicago butter price” means the simple average of the daily wholesale selling prices (using the midpoint of any price range as one price) of Grade A A (93-score) bulk creamery butter per pound at Chicago as reported for the month by the Department. I f no price is reported for Grade AA (93-score) butter, the highest of the prices reported for Grade A (92-score) butter for that day shall be used in lieu of the price for Grade AA (93-score) butter.
M arket A dm inistr ator
§ 1125.20 Designation.The agency for the administration of
this part shall be a market administrator, selected by the Secretary, who shall be entitled to such compensation as may be designated by, and shall be subject to removal at the discretion of, the Secretary.§ 1125.21 Powers.
The market administrator shall have the following powers with respect to this part:
(a) To administer its terms and provisions;
(b) To receive, investigate, and report to the Secretary complaints of violations;
(c) To make rules and regulations to effectuate its terms and provisions; and
(d) To recommend amendments to the Secretary.§ 1125.22 Duties*
The market administrator shall perform all duties necessary to administer the terms and provisions of this part, including but not limited to the following:
(a) Within 30 days following the date on which he enters upon his duties, or such lesser period as may be prescribed by the Secretary, execute and deliver to the Secretary a bond effective as of the date on which he enters upon such duties and conditioned upon the faithful performance-of such duties, in an amount and with surety thereon satisfactory to the Secretary;
(b) Employ and fix the compensation of such persons as may be necessary to enable him to administer its terms and provisions;
(c) Obtain a bond in a reasonable amount and with reasonable- surety thereon covering each employee who handles funds entrusted to the market administrator;
(d) Pay out of the funds provided by § 1125.88 the cost of his bond and of the bonds of his employees, his own compensation, and all other expenses (except those incurred under § 1125.87) necessarily incurred by him in the maintenance and functioning of his office and in the performance of his duties ;
(e) Keep such books and records as will clearly reflect the transactions provided for in this part, and upon request by the Secretary surrender the same to such other person as the Secretary may designate;
FEDERAL REGISTER, V O L 31, NO. 93— FRIDAY, MAY 13, 1966
7076 PROPOSED RULE MAKING(f ) Submit his books and records to
examination by the Secretary and furnish such information and reports as may be requested by the Secretary;
(g) Audit all reports and payments by each handler by inspection of such handler’s records and of the records of any other handler or person upon whose utilization the classification of skim milk or butterfat for such handler depends;
(h) Publicly announce, at his discretion, unless otherwise directed by the Secretary, by posting in a conspicuous place in his office and by such other means as he deems appropriate, the name of any person who, within 10 days after the day upon which he is required to perform such acts, has not:
(1) Made reports pursuant to §§ 1125. 30 through 1125.32; or
(2) Made one or more of the payments pursuant to §§ 1125.80 through 1125.88;
(i) On or before the 13th day after the end of each month, report to each cooperative association (or its duly designated agent) which so requests the class utilization (and within Class II, the utilization specified in § 1125.54(c)) of milk of its member producers which is received by each handler directly from farms or from the cooperative association pursuant to § 1125.10(f). For the purposes of this report, such milk shall be prorated to each class (and within Class II, to the utilization specified in § 1125.54(c)) in the proportion that the total receipts of milk from producers and from cooperative associations pursuant to § 1125.10(f) of such handler were used in each class;
(j) Notify handlers as follows:(1) On or before the 13th day after
the end of each month, each handler whose net pool obligation is computed pursuant to § 1125.70 of:
(1) The amounts and values of his producer milk in each class and the totals of such amounts and values;
(ii) The amount of any charge made pursuant to § 1125.70 (b), (c), (d ), or(e) ;
(iii) The uniform prices for base milk and excess milk;
(iv) The amounts specified in § 1125.84(b )(1 ), (2), and (3 );
(v) The amount due such handler from the producer-settlement fund or the amount to be paid by such handler to the producer-settlement fund, as the case may be; and
(vi) The totals of the amounts required to be paid by such handler pursuant to §§ 1125.87 and 1125.88; and
(2) On or before the 22d day after the end of each month, each handler whose obligation is computed pursuant to § 1125.67, of any amount computed pursuant to § 1125.67(a) on the basis of information reported by such handler, the amount computed pursuant to § 1125.67 (b), and the amount due pursuant to § 1125.88 from such handler;
(k) Publicly announce by posting in a conspicuous place in his office and by such other means as he deems appropriate the prices determined for each month as follows:
(1) On or before the 5th day of each month the minimum price for Class I milk pursuant to § 1125.51(a) and the Class I butterfat differential pursuant to § 1125.52(a), both for the current month, and the minimum price for Class I I milk pursuant to § 1125.51(b) and the Class I I butterfat differential pursuant to § 1125.52(b), both for the preceding month; and
(2) On or before the 13th day of each month, the weighted average and uniform prices computed pursuant to §§ 1125.71 and 1125.72 and the butterfat differential computed pursuant to § 1125.82, each applicable to milk received during the preceding month;
(l) Prepare and disseminate to the public such statistics and information as he deems advisable and as do not reveal confidential information;
(m) Whenever required for the purpose of allocating receipts from other order plants pursuant to § 1125.46(a) (7) and the corresponding step of § 1125.46 (b ), estimate and publicly announce the utilization (to the nearest whole percentage) , in each class, during the month, of skim milk and butterfat, respectively, in producer milk of all handlers. Such estimate shall be based upon the most current available data and shall be final for such purpose;
(n) Report to the market administrator of the other order, as soon as possible after the report of receipts and utilization for the month is received from a handler who has received fluid milk products from an other order plant, the classification to which such receipts are allocated pursuant to § 1125.46 pursuant to such report, and thereafter any change in such allocation required to correct errors disclosed in verification of such report; and
(o) Furnish to each handler operating a pool plant who has shipped fluid milk products to an other order plant, the classification to which the skim milk and butterfat in such fluid milk products were allocated by the market administrator of the other order on the basis of the report of the receiving handler; and, as necessary, any changes in such classification arising in the verification of such report.
R eports , R ecords and F a c il it ie s
§ 1125.30 Monthly reports of receipts and utilization.
On or before the 8th day of each month each handler shall report to the market administrator, in the detail and on forms prescribed by the market administrator, the following information for the preceding month:
(a) Each handler operating a pool plant(s) shall report separately for each pool plant:
(1) The quantities of skim milk and butterfat contained in:
(i) Milk received directly from producers, showing separately any milk of own-farm production;
(ii) Milk received from a cooperative association pursuant to § 1125.10(f);
(iii) Fluid milk products received from other pool plants; and
(iv) Other source milk;(2) The utilization of all skim milk
and butterfat required to be reported, including the quantities contained in fluid milk products on hand at the beginning and end of the month;
(3) The aggregate quantities of base milk and excess milk received; and
(4) Such other information with respect to such receipts and utilization as the market administrator may prescribe.
(b) Each producer-handler shall report:
(1) The quantities of skim milk and butterfat contained in:
(1) Milk of own-farm production;(ii) Receipts of fluid milk products
from pool plants, showing separately receipts in packaged form and in bulk; and
(iii) Other source milk, showing separately any receipts from another dairy farmer; and
(2) As specified in paragraph (a) (2) and (4) of this section.
(c) Each cooperative association shall report with respect to milk for which it is the handler pursuant to either § 1125.10(e) or ( f ) :
(1) The quantities of skim milk and butterfat received from producers;
(2) The utilization of skim milk and butterfat for which it is the handler pursuant to § 1125.10(e);
(3) The quantities of skim milk and butterfat delivered to each pool plant pursuant Xo § 1125.10(f); and
(4) As specified in paragraph (a) (3) and (4) of this section.
(d) Each handler who operates a partially regulated distributing plant shall report as specified in paragraph(a) (1), (2), and (4) of this section except that receipts from dairy farmers in Grade A milk shall be reported in lieu of those in producer milk. Such report shall include a separate statement showing the respective amounts of skim milk and butterfat disposed of on routes in the marketing area as Class I milk.
(e) Each handler who operates an other order plant with disposition of fluid milk products on routes in the marketing area shall report the quantities of skim milk and butterfat in such disposition.
§ 1125.31 Payroll reports.
On or before the 20th day of each month, handlers shall report to the market administrator as follows:
(a) Each handler with respect to each of his pool plants and each cooperative association which is a handler pursuant to § 1125.10 (e) or ( f ) shall submit his producer payroll for deliveries (other than his own-farm production) in the preceding month which shall show:
(1) The total pounds of base milk and the total pounds of excess milk received from each producer, the pounds of butterfat contained in such milk, and the number of days on which milk was delivered by such producer in such month;
(2) The amount of payment to each producer and cooperative association; and
FEDERAL REGISTER, VOL. 31, NO. 93— FRIDAY, MAY 13, 1966
PROPOSED RULE MAKING
(3) The nature and amount of any deductions or charges involved in such payments; and
(b) Each handler operating a partially regulated distributing plant who wishes computations pursuant to § 1125.67(a) to be considered in the computation of his obligation pursuant to § 1125.67 shall submit his payroll for deliveries of Grade A milk by dairy farmers which shall show:
(1) The total pounds of milk and the butterfat content thereof received from each dairy farmer;
(2) The amount of payment to each dairy farmer (or to a cooperative association on behalf of such dairy farm er); and
(3) The nature and amount of any deductions or charges involved in such payments.
§1125.32 Other reports.At such time and in such manner as
the market administrator may prescribe, each handler shall report to the market administrator such information in addition to that required under § 1125.30 as may be requested by the market administrator with respect to milk and milk products handled by him.
§ 1125.33 Records and facilities.Each handler shall maintain and make
available to the market administrator or to his representative during the usual hours of business such accounts and records of his operations and such facilities as are necessary for the market administrator to verify or to establish the correct data with respect to the information required to be reported pursuant to §§ 1125.14, 1125.30, 1125.31, and 1125.32 and payments required to be made pursuant to §§ 1125.80 through 1125.88.
§ 1125.34 Retention of records.All books and records required under
this part to be made available to the market administrator shall be retained by the handler for a period of 3 years to begin at the end of the month to which such books and records pertain: Provided, That if, within such 3-year period, the market administrator notifies the handler in writing that the retention of such books and records, or of specified books and records, is necessary in connection with a proceeding under section 8c(15) (A ) of the Act or a court action specified in such notice, that handler shall retain such books and records, or specified books and records, until further written notification from the market administrator. In either case the market administrator shall give further written notification to the handler promptly upon the termination of the litigation or when the records are no longer necessary in connection therewith.§ 1125.35 Handler report to producers.
(a) In making payments to producers pursuant to § 1125.80, each handler, on or before the 19th day of each month, shall furnish each producer with a supporting statement in such form that it may be retained by the producer, which shall show for the preceding month:
(1) The identification of the handler and the producer;
(2) The total pounds of milk delivered by the producer and the average butter- fat test thereof, the pounds of base and excess milk, and the pounds per shipment if such information is not furnished to the producer each day of delivery;
(3) The minimum rate(s) at which payment to the producer is required under the provisions of § 1125.80;
(4) The rata per hundredweight and amount of any premiums or payments above the minimum prices provided by the order;
(5) The amount or rate per hundredweight of each deduction claimed by the handler, together with a description of the respective deductions; and
(6) The net amount of payment to the producer.
(b) In making payment to a cooperative association in aggregate pursuant to § 1125.80(b) each handler upon request shall furnish to the cooperative association, with respect to each producer for whom such payment is made, any or all of the above information specified in paragraph (a) of this section.
C lass if ic a tio n
§ 1125.40 Skim milk and butterfat to be classified.
All skim milk and butterfat received within the month by a handler which is required to be reported pursuant to § 1125.30 shall be classified by the market administrator pursuant to the provisions of §§ 1125.41 through 1125.46.§ 1125.41 Classes o f utilization.
Subject to the conditions set forth in §§ 1125.42, 1125.43, and 1125.44, the classes of utilization shall be as follows:
(a) Class I milk. Class I milk shall be all skim milk and butterfat:
(1) Disposed of in the form of a fluid milk product, subject to the following limitations and exceptions:
(1) Any products fortified with added nonfat milk solids shall be Cfiass I in an amount equal only to the weight of an equal volume of a like unmodified product of the same butterfat content;
(ii) Fluid milk products in concentrated form shall be Class I in an amount equal to the skim milk and butterfat used to produce the quantity of such products disposed of; and
(iii) Products classified as Class I I pursuant to paragraph (b) (3 ), (4), or(5) of this section are excepted;
(2) Contained in monthly inventory variation of fluid milk products; and
(3) Not specifically accounted for as Class n utilization.
(b) Class I I milk. Class n milk shall be all skim milk and butterfat:
(1) Used to produce evaporated milk in hermetically sealed containers, butter, nonfat dry milk solids, powdered whole milk, casein and cheese (other than cottage, “baker’s,” “pot,” cream or neuf- chatel), including that contained in residual products resulting from the manufacture o f butter and cheese;
(2) Used to produce products other than fluid milk products or those specified in subparagraph (1) of this paragraph;
7077
(3) In fluid milk products disposed of in bulk to a commercial food processing establishment for use in food products which are processed for general distribution to the public for consumption off the premises;
(4) In fluid milk products disposed of for livestock feed;
(5) In fluid milk products dumped after such prior notice and opportunity for verification as may be required by the market administrator;
(6) In shrinkage at each pool plant as computed pursuant to § 1125.42(b) (1) but not to exceed the following amount:
(i) Two percent of receipts in producer milk pursuant to § 1125.12(a) (1) and (2 ); plus
(ii) One and one-half percent of receipts of fluid milk products in bulk from other pool plants; plus
(iii) One and one-half percent of receipts from a cooperative association in its capacity as a handler pursuant to § 1125.10(f), except that if the handler operating the pool plant files notice with the market administrator that he is purchasing such milk on the basis of farm weights and individual producer tests, the applicable percentage shall be 2 per- -cent; plus
(iv ) One and one-half percent o f receipts of fluid milk products in bulk from an other order plant, exclusive of the quantity for which Class I I utilization was requested by the operator of such plant and the handler; plus
(v ) One and one-half percent of receipts of fluid milk products in bulk from unregulated supply plants, exclusive of the quantity for which Class I I utilization was requested by the handler; less
(vi) One and one-half percent of fluid milk products disposed of in bulk to other plants, except, in the case of milk diverted to a nonpool plant, if the operator of the plant to which the milk is diverted purchases such milk on the basis of farm weights and individual producer tests, the applicable percentage shall be 2 percent;
(7) In shrinkage at each pool plant as computed pursuant to § 1125.42(b) (2 ); and
(8) In shrinkage resulting from milk for which a cooperative association is the handler pursuant to § 1125.10 (e) or ( f ) not being delivered to pool plants and nonpool plants, but not in excess of one- half percent of such receipts, exclusive o f those for which farm weights and individual producer tests are used as the basis of receipt at the plant to which delivered.§ 1125.42 Shrinkage.
The market administrator shall allocate shrinkage over a handler’s receipts at each pool plant as follows:
(a ) Compute the total shrinkage of skim milk and butterfat, respectively (after reducing the quantity transferred to any nonpool plant located on the same premises by a pro rata share of shrinkage in such nonpool plant based on the proportion that such transfers are of its total receipts); and
(b) Prorate the resulting amounts between:
FEDERAL REGISTER, V O L 31, NO. 93— FRIDAY, MAY 13, 1966
7078 PROPOSED RULE MAKING(1) A quantity equal to 50 times the
maximum that may be computed pursuant to § 1125.41(b) (6 ) ; and
(2) Skim milk and butterfat in other source milk in the form of bulk fluid milk products, exclusive of that specified in § 1125.41(b)(6) (iv) and (v ).
§ 1125.43 Responsibility o f h and l e rs and reclassification o f milk.
(a) All skim milk and butterfat shall be Class I milk unless the handler who first received such skim milk or butterfat proves that such skim milk and butterfat should be classified as Class n milk.
(b) The burden shall rest upon each handler to establish the sources of milk and milk products required to be reported by him pursuant to § 1125.30.
(c) Any skim milk or butterfat shall be reclassified if verification by the market administrator discloses that the original classification was incorrect.
§ 1125.44 Interplant movements.Skim milk and butterfat moved by
transfer, and by diversion under paragraph (c) of this section, as fluid milk products from a pool plant shall be assigned (separately) to each class in the following manner:
(a) To a pool distributing plant: As Class I milk to the extent Class I milk is available at the transferee plant after computations pursuant to § 1125.46(a) (7) and the corresponding step of § 1125.46(b), subject to the following provisions:
(1) In the event the quantity transferred exceeds the total of receipts from producers and other pool plants at the transferor plant, such excess shall be assigned last to the Class I milk available at the transferee plant;
(2) I f more than one transferor plant is involved, the available Class I milk shall, first be assigned to pool plants located in District 1 and the counties of Pierce, Kitsap, and Mason, and then in sequence to the plants at which the least location adjustment applies;
(3) I f Class I milk is not available in amounts equal to the sum of the quantities to be assigned pursuant to sub- paragraph (2) of this paragraph to plants having the same location adjustments, the transferee handler may designate to which of such plants the available Class I milk shall be assigned;
(4) I f receipts of skim milk or butterfat from a pool plant located in District 1 or in the counties of Kitsap, Mason, or Pierce are assigned to Class I I milk at the transferee plant, they shall be allocated, as designated by the transferee handler, to the uses stated in § 1125.- 54(a) only to the extent that the quantity so assigned exceeds other Class I I uses remaining at the transferee plant after computations pursuant to § 1125.46 (a) (7) and the corresponding step of § 1125.46(b);
(5) Notwithstanding the prior provisions of this paragraph, any such skim milk and butterfat transferred in bulk from a pool plant to a pool distributing plant In which facilities are maintained and used to receive milk or milk products required by applicable health au
thority regulations to be kept physically separate from Grade A milk shall be classified in accordance with the provisions of paragraph (b) of this section; and
(6) I f the transferor plant received during the month other source milk to be allocated pursuant to § 1125.46(a) (6) and (7) and the corresponding steps of § 1125.46(b), the skim milk and butterfat so transferred up to the total of such receipts shall not be classified as Class I milk to a greater extent than would be applicable to a like quantity of such other source milk received at the transferee plant.
(b) To a pool supply plant as Class I I milk, subject to the following conditions:
(1) The skim milk or butterfat so assigned to Class I I milk shall be limited to the amount thereof remaining in Class I I milk in the transferee plant after computations pursuant to § 1125.46(a) (7) and the corresponding step of § 1125.46(b) for such plant, and any additional amounts of such skim milk or butterfat shall be assigned to Class I milk and credited to transfers from transferor plants in the sequence at which the least location adjustment applies;
(2) I f more than one transferor plant is involved, the available Class I I milk shall first be assigned to transferor plants located outside District 1 and Kitsap, Mason, and Pierce Counties;
(3) I f Class n milk is not available in amounts equal to the sum of the quantities to be assigned pursuant to subparagraph (2) of this paragraph, the transferee handler may designate the plant(s) to which the available Class n milk shall be assigned; and
(4) I f receipts of skim milk or butterfat from a pool plant located in District 1 or in the counties of Kitsap, Mason, or Pierce are assigned to Class n milk at the transferee plant, they shall be allocated, as designated by the transferee handler, to the uses stated in § 1125.54(a) only to the extent that the quantity so assigned exceeds other Class I I uses remaining at the transferee plant after computations pursuant to § 1125.46(a) (7) and the corresponding step of § 1125.46(b).
(c) To a nonpool plant:(1) Except as provided for in subpara
graphs (3) and (4) of this paragraph, as Class I milk, if transferred or diverted to a nonpool plant located outside the marketing area, except that cream transferred to a nonpool plant so located shall be classified as Class n if such nonpool plant neither distributes fluid milk products on routes nor disposes of them to other nonpool plants, and the market administrator is permitted to audit the records of such nonpool plant for purposes of verification;
(2) As Class I milk, if transferred or diverted to a producer-handler as defined in any order (including this paît) issued pursuant to the Act, or to the plant of such a producer-handler;
(3) As Class n milk, if transferred or diverted to a nonpool plant located in the marketing area or within any of the counties of Kitsap, Mason,. Clallam, Jefferson, and Pierce in the State of
Washington, from which fluid milk products are not distributed on routes, subject to the following conditions^
(i) The transfer shall be classified as Class I milk unless the market administrator is permitted to audit the records of the nonpool plant for purposes of verification;
(ii) I f such nonpool plant disposes of fluid milk products to any other nonpool plant distributing fluid milk products on routes, the transfer or diversion shall be classified as Class I milk up to the quantity of such disposition to the second nonpool plant; and
(iii) Milk classified as Class I I shall be assigned to uses specified in § 1125.54(a) to the extent that such uses are available at such nonpool plant; and
(4) As follows, if transferred to an other order plant in excess of receipts from such plant in the same category as described in subdivision ( i ) , ( i i ) , or (iii) of this subparagraph:
(i) I f transferred in packaged form, classification shall be in the classes to which allocated as a fluid milk product under the other order;
(ii) I f transferred in bulk form, classification shall be in the classes to which allocated as a fluid milk product under the other order (including allocation under the conditions set forth in subdivision (iii) of this subparagraph);
(iii) I f the operators of both the transferor and transferee plants so request in the reports of receipts and utilization filed with their respective market administrators, transfers in bulk form shall be classified as Class I I to the extent of the Class I I utilization (or comparable utilization under such other order) available for such assignment pursuant to the allocation provisions of the transferee order;
(iv) I f information concerning the classification to which allocated under the other order is not available to the market administrator for purposes of establishing classification pursuant to this subparagraph, classification shall be as Class I, subject to adjustment when such information is available;
(v) For purposes of this subparagraph, if the transferee order provides for more than two classes of utilization, milk allocated to a class consisting primarily of fluid milk products shall be classified as Class I, and milk allocated to other classes shall be classified as Class II ; and'
(vi) I f the form in which any fluid milk product is transferred to an other order plant is not defined as a fluid milk product under such other order, classification shall be in accordance with the provisions of § 1125.41.§ 1125.45 Compulation of skim milk
and butterfat in each class.For each month the market admin
istrator shall correct for mathematical and other obvious errors the reports of receipts and utilization submitted pursuant to § 1125.30 (a) and (c) and compute the total pounds of skim milk and butterfat in each class. For the purposes of such computation, 0.06 percent shall be used as the butterfat content of skim milk where no specific tests are available. Such computations shall be as follows:
FEDERAL REGISTER, VOL. 31, NO. 93— FRIDAY, MAY 13, 1966
PROPOSED RULE MAKING 7079
(a) I f any other source milk not subject to allocation at such plant pursuant to § 1125.46(a) (2) through (4) was received at any pool plant of a handler, there will be computed for such handler the total pounds of skim milk and but- terfat, respectively, in each class at all of his pool plants combined, exclusive of any classification based upon movements between such plants, and allocation pursuant to § 1125.46 and computation of obligation pursuant to § 1125.70 shall be based upon the combined utilization so computed. For purposes of assigning location adjustments pursuant to §§ 1125.53 and 1125.54 with respect to milk moved between such plants, the skim milk and butterfat subtracted from each class pursuant to § 1125.46(a) (2), (3), (4), (6), and (7) and the corresponding steps of § 1125.46(b) will be assigned so far as possible to utilization (exclusive of such interplant movements) reported at the plant at which it was received, and thereafter in sequence to plants at which location adjustment for such class is the same or most nearly similar, and the applicable location adjustments will be determined on the basis of the classification resulting from the applipation of § 1125.44 (a) and(b) to the remaining utilization reported;
(b) I f no fluid milk products to be allocated pursuant to § 1125.46(a) (6) or(7) were received at any pool plant of a handler, the total pounds of skim milk and butterfat, respectively, in each class will be computed for each pool plant of such handler, and allocation pursuant to § 1125.46 and computation of obligation pursuant to § 1125.70 shall be made separately for each pool plant of the handler; and
(c) There will be computed for eachcooperative association reporting pursuant to § 1125.30(c) the pounds in each class of skim milk and butterfat, respectively, in producer milk pursuant to § 1125.12(b) (1) and (2)<ii). Theamounts so determined shall be those used for computation pursuant to §1125.46(0.
§ 1125.46 Allocation o f skim milk and butterfat classified.
After making the computations pursuant to § 1125.45, the market administrator shall determine the classification of producer milk for each handler at all his pool plants (or at each pool plant, when § 1125.45(b) applies) as follows:
(a) Skim milk shall be allocated in the following manner:
(1) Subtract from the total pounds of skim milk in Class I I the pounds of skim milk classified as Class I I pursuant to § 1125.41(b) (6 );
(2) Subtract from the remaining pounds of skim milk in each class the pounds of skim milk in fluid milk products received in packaged form from other order plants as follows:
(i) From Class I I milk, the lesser of the pounds remaining or 2 percent of such receipts; and
(ii) From Class I milk, the remainder of such receipts;
(3) Subtract in the order specified below, from the pounds of skim milk re
maining in each class, in series beginning with Class II, the pounds of skim milk in each of the following:
(i) Other source milk in a form other than that of a fluid milk product;
(ii) Receipts of fluid milk products not qualified for disposition to consumers in fluid form, or which are from unidentified sources; and
(iii) Receipts of fluid milk products from a producer-handler, as defined under this or any other Federal order;
(iv) . Subtract, if the total pounds of skim milk in all classes pursuant to § 1125.45 exceed the total pounds of skim milk reported pursuant to § 1125.30 (a )(1 ), from the remaining pounds of skim milk in each class, in series beginning with Class II, the amount determined by prorating such excess between the pounds of skim milk subtracted pursuant to subdivisions (i) through (iii) of this subparagraph and the remaining receipts;
(4) Subtract, in the order specified below, from the pounds of skim milk remaining in Class n , but not in excess of such quantity:
(i) Receipts of fluid milk products from unregulated supply plants for which the handler requests Class I I utilization;
(ii) Remaining receipts o f fluid milk products from unregulated supply plants which are in excess of the pounds of skim milk determined by multiplying the pounds of skim milk remaining in Class I milk by 1.25 and subtracting the sum of the pounds of skim milk in receipts of producer milk, receipts from pool plants of other handlers (and of the same handler, when § 1125.45(b) applies), and receipts in bulk from other order plants; and
(iii) Receipts of fluid milk products in bulk from an other order plant in excess of similar transfers to such plant, if Class I I utilization was requested by the operator of such plant and the handler;
(5) Add to the remaining pounds of skim milk in Class I I milk the pounds subtracted pursuant to subparagraph (1) of this paragraph ;
(6) Subtract from the pounds of skim milk remaining in each class, pro rata to such quantities, the pounds of skim milk in receipts of fluid milk products from unregulated supply plants which were not subtracted pursuant to subparagraph(4) (i) and (ii) of this paragraph;
(7) Subtract from the pounds of skim milk remaining in each class, in the following order, the pounds of skim milk in receipts of fluid milk products in bulk from an other order plant(s), in excess in each case of similar transfers to the same plant, which were not subtracted pursuant to subparagraph (4) (iii) of this paragraph:
(i) In series beginning with Class II, the pounds determined by multiplying the pounds of such receipts by the larger o f the percentage of estimated Class I I utilization of skim milk announced for the month by the market administrator pursuant to § 1125.22(m) or the percentage that Class n utilization remaining is of the total remaining utilization of skim milk of the handler; and
(ii) From Class I, the remaining pounds of such receipts;
(8) Subtract from the pounds of skim milk remaining in each class the pounds of skim milk received in fluid milk products from pool plants of other handlers (and of the same handler, when § 1125.- 45(b) applies) according to the classification assigned pursuant to § 1125.44;
(9) I f the pounds of skim milk remaining in both classes exceed the pounds of skim milk in producer milk, subtract such excess from the pounds of skim milk remaining in each class in series beginning with Class II. Any amount so subtracted shall be known as “ overage” ;
(b) Butterfat shall be allocated in accordance with the procedure outlined for skim milk in paragraph (a) of this section; and
(c) Combine the amounts of skim milk and butterfat determined pursuant to paragraphs (a) and (b) of this section and § 1125.45(c) into one total for each class and determine the weighted average butterfat content of producer milk in each class.
M in im u m P rices
§1125.50 Basic formula price.The basic formula price shall be the
average price per hundredweight for manufacturing grade milk, f.o.b. plants in Wisconsin and Minnesota, as reported by the Department for the month, adjusted to a 3.5 percent butterfat basis by a butterfat differential rounded to the nearest one-tenth cent computed at 0.12 times the simple average of the daily wholesale selling prices (using the midpoint of any price range as one price) of Grade A (92-score) bulk creamery butter per pound at Chicago, as reported by the Department for the month. The basic formula price shall be rounded to the nearest full cent.§ 1125.51 Class prices.
Subject to the provisions of §§ 1125.52 through.~-1125.54, the minimum class prices per hundredweight of milk for the month shall be as follows:
(a) Class I milk. The price for ClassI milk shall be the basic formula price for the preceding month plus $1.65: Provided, That the price for Class I milk for the months of April through June, inclusive, of any year except 1966 shall not be higher than the price computed pursuant to the above provisions of this paragraph for the month of March immediately preceding, and the price for Class'I milk for any October through January period, inclusive, shall not be lower than the price computed pursuant to the provisions of this paragraph for the month of September immediately preceding: And provided further, That the Class I prices for the period from the effective date of this amended order through June 1966 shall not be less than the Class I price for April 1966.
(b) Class I I milk. The price for ClassI I milk shall be the basic formula price for the month, but not to exceed the price computed as follows:
(1) Multiply the Chicago butter price by 4.2;
No. 93-FEDERAL REGISTER, VOL. 31, NO. 93— FRIDAY, MAY 13, 1966
7080 PROPOSED RULE MAKING(2) Multiply by 8.2 the weighted aver
age of carlot prices per pound for nonfat dry milk solids, spray process, for human consumption, f.o.b. manufacturing plants in the Chicago area, as published for the period from the 26th day of the immediately preceding month through the 25th day of the current month by the Department; and
(3) From the sum of the results arrived at under subparagraphs (1) and (2) of this paragraph subtract 48 cents, and round to the nearest cent.§ 1125.52 B u t te r f a t differentials to
handlers.I f the average butterfat content of
Class I milk or Class n milk, computed pursuant to § 1125.46, differs from 3.5 percent, there shall be added to, or subtracted from, the applicable class price (§ 1125.51) for each one-tenth of 1 percent that the average butterfat content of such class is respectively above, or below, 3.5 percent, a butterfat differential computed as follows, rounded to the nearest one-tenth cent;
(a) Class I milk. Multiply the Chicago butter price for the preceding month by 0.125; and
(b) Class I I milk. Multiply the Chicago butter price for the current month by 0.120.§ 1125.53 Location adjustments on Class
I milk.The price of Class I milk at each plant
shall be, regardless of point of disposition within or outside the marketing area, the Class I price pursuant to § 1125.51 less a location differential for such plant shown in the table below:
Class I price differential (cents per
Plant location: hundredweight)District 1 or Kitsap, Mason or Pierce
Countie§_______________________________ 0District 4________________________________ 15Districts 2, 3 and Kittitas County___ 20District 5 and other locations outside
the marketing area__________________ 40
§ 1125.54 Location adjustments on ClassII milk.
In computing each handler’s value of milk there shall be added with respect to each pool plant located in District 1 or in the counties of Kitsap, Mason or Pierce an amount of money computed as follows:
(a) Compute the sum (in pounds) of:(1) The total utilization at such plant
(including any disposition of skim milk and butterfat from such plant for similar uses at nonpool plants) of skim milk and butterfat, respectively, in the products or uses listed in §1125.41 (b) (2) and (3 ); and
(2) The total quantity of skim milk and butterfat transferred to other pool plants and allocated to the uses specified in subparagraph (1) of this paragraph (as provided in § 1125.44 (a) (4) and (b ) (4 ) ) ;
(b) Subtract from the amounts of skim milk and butterfat, respectively, resulting from paragraph (a) of this section, to the extent of such amounts, the amounts of skim milk and butterfat received at such plant from pool plants not
located in District 1 or in the counties of Kitsap, Mason or Pierce, and assigned to Class I I milk pursuant to § 1125.44; and
(c) Multiply by 25 cents per hundredweight the lesser of the following quantities:
(1) The stim of the net amounts of skim milk and butterfat resulting from paragraph (b) of this section; or
(2) The total amount of Class I I milk pursuant to § 1125.46(c).§ 1125.55 Use o f equivalent prices.
I f for any reason a price quotation required by this part for computing class prices or for other purposes is not available in the manner described, the market administrator shall use a price determined by the Secretary to be equivalent to the price which is required.
D e t e r m in a t io n o f B ase
§ 1125.60 Computation o f p r o d u c e r bases.
Subject to the rules set forth in § 1125.61, the market administrator shall determine bases for producers in the manner provided in paragraphs (a) and (b) of this section:
(a) The daily base of each producer whose milk was received by a handler (s) on not less than one hundred twenty (120) days during the months of August through December, Inclusive, shall be an amount computed by dividing such producer’s total pounds of milk delivered in such 5-month period by the number of days from the date of his first delivery to the end of such 5-month period. The base so computed, which shall be recomputed each year, shall become effective on the first day of February next fo llowing and shall remain in effect through the month of January of the next succeeding jfear: Provided, That for any dairy farmer for whom information concerning deliveries during the base- earning period is available to the market administrator and who becomes a producer as a result of (1) the plant to which his milk was delivered during the base-earning period subsequently being qualified as a pool plant, or (2) cancellation of a producer-handler’s designation as such, a daily base shall be computed pursuant to this paragraph.
(b) Any producer who is not eligible to receive a base computed pursuant to paragraph (a) of this section, shall have a monthly base computed by multiplying his deliveries to a handler (s) during the month by the appropriate monthly percentage in the following table:
January_________70 July ------------- 55F ebruary___ ____70 A u g u st______ 60March __________65 September___ ___ 60A p r il________ ____55 October _____ ___ 65M a y _________ ____45 N ovem ber___ 70J u n e ________ ____50 D ecem ber___ 70
§ 1125.61 Base rules.The following rules shall be observed
in the determination of bases:(a) A base may be transferred upon
written notice to the market administrator on or before the last day of the month of transfer, but under the following circumstances only: I f a producer
who earned a base pursuant to § 1125.60 (a) sells, leases or otherwise conveys his herd to another producer, the latter may receive the transferor’s base, pursuant to the conveyance, and utilize such base for the remainder of the period for which such base is effective pursuant to § 1125.60(a), subject to the following conditions:
(1) Such base shall apply to deliveries of milk by the transferee producer from the same farm only;
(2) I f such conveyance takes place subsequent to August 1 of any year, all milk delivered to a handler (s) between August 1 and the last day of the baseearning period as specified in § 1125.60 (a ), inclusive, from the same farm (whether by the transferor or transferee producer) shall be utilized in computing the base of the transferee producer pursuant to § 1125.60(a);
(3) It is established to the satisfaction of the market administrator that the conveyance of the herd was bona fide and not for the purpose of evading any provision of this order; and
(4) Notwithstanding subparagraphs (1) and (2) of this paragraph, but in compliance with subparagraph (3) of this paragraph:
(i) A base, whether earned pursuant to § 1125.60(a) or received by transfer, may be transferred to a member of a baseholder’s immediate family; and
(ii) In the case of a baseholder’s death, a base earned pursuant to § 1125.60(a) by the baseholder or by a member of his immediate family may be further transferred to an outside party: Provided, That for purposes of this subparagraph a transfer to an estate shall not be considered as a transfer to an outside party.
(b) A producer who ceases deliveries to a pool plant for more than 45 days shall lose his base if computed pursuant to § 1125.60(a) and if he resumes deliveries to such a plant he shall be paid on a base determined pursuant to § 1125.60(b) until he can establish a new base in the manner provided in § 1125.60 (a ).
(c) By notifying the market administrator in writing on or before the 15th day of any month, a producer holding a base established pursuant to § 1125.60(a) may relinquish such base by cancellation. Such producer’s base shall be computed in the manner provided by § 1125.60(b) and shall be effective from the first day of the month in which notice is received by the market administrator until the close of the period, pursuant to § 1125.60(a), for which such base was computed.
(d) As soon as bases computed by the market administrator are allotted, notice of the amount of each producer’s base shall be given by the market administrator to the handler receiving such producer’s milk and the cooperative association of which the producer is a member. Each handler, following receipt of such notice, shall promptly post in a conspicuous place at each of his plants a list or lists showing the base of each producer whose milk is received at such plant.
FEDERAL REGISTER, VOL. 31, NO. 93— FRIDAY, MAY 13, 1966
PROPOSED RULE MAKING 7081
(e) I f a producer operates more than one farm he shall establish a separate base with respect to producer milk delivered from each such farm.
(f) Only producers as defined in § 1125.11 may establish or earn a base pursuant to the provisions of § 1125.60, and only one base shall be allotted with respect to milk produced by one or more persons where the land, buildings and equipment used are jointly owned or operated.
A p p l ic a b il it y of P r o visio ns
§ 1125.65 Producer-handlers.
Sections 1125.40 through 1125.46, 1125.50 through 1125.55, 1125.60, 1125.61, 1125.70 through 1125.72, and 1125.80 through 1125.89 shall not apply to a producer-handler.§ 1125.66 Plants subject to other Fed
eral orders.
Except for §§ 1125.30(e) and 1125.32 through 1125.34, the provisions of this part shall not apply to a handler with respect to the operation of plants described as follows:
(a) A distributing plant from which a lesser volume of fluid milk products is disposed of as route disposition in the Puget Sound marketing area than as route disposition in the marketing area of another marketing agreement or order issued pursuant to the Act and which is fully subject to the classification and pricing provisions of such other agreement or order; and
(b) Any supply plant for any portion of the period of January through September, inclusive, that producer milk at such plant is subject to the classification and pricing provisions of another order issued pursuant to the Act.
§ 1125.67 Obligations of handler operating a partially regulated distributing plant.
Each handler who operates a partially regulated distributing plant shall pay to the market administrator for the producer-settlement fund on or before the 25th day after the end of the month either of the amounts (at the handler’s election) calculated pursuant to paragraph (a) or (b) of this section. I f the handler fails to report pursuant to §§ 1125.30(d) and 1125.31(b) the information necessary to compute the amount specified in paragraph (a) of this section, he shall pay the amount computed pursuant to paragraph (b) of this section:
(a) An amount computed as follows :(1) (i) The obligation that would have
been computed pursuant to § 1125.70 at such plant shall be determined as though such plant were a pool plant. For purposes of such computation, receipts at such nonpool plant from a pool plant or an other order plant shall be assigned to the utilization at which classified at the pool plant or other order plant and transfers from such nonpool plant to a pool plant or an other order plant shall be classified as Class I I milk if allocated to such class at thè pool plant or other order plant and be valued at the weighted average price of the respective order if
so allocated to Class I milk. There shall be included in the obligation so computed a charge in the amount specified in § 1125.70(e) and a credit in the amount specified in § 1125.84(b) (3) with respect to receipts from an unregulated supply plant, unless an obligation with respect to such plant is computed as specified in subdivision (ii) of this sub- paragraph.
(ii) I f the operator of the partially regulated distributing plant so requests, and provides with his reports pursuant to, §§ 1125.30(d) and 1125.31(b) similar reports with respect to the operations of any other nonpool plant which serves as a supply plant for such partially regulated, distributing plant by shipments to such plant during the month equivalent to the requirements of § 1125.8(b) (2), with agreement of the operator of such plant that the market administrator may examine the books and records of such plant for purposes of verification of such reports, there will be added the amount of the obligation computed at such nonpool supply plant in the same manner and subject to the same conditions as for the partially regulated distributing plant.
(2) From this obligation there will be deducted the sum of (i) the gross payments made by such handler for Grade A milk received during the month from dairy farmers at such plant and like payments made by the operator of a supply plant(s) included in the computations pursuant to subparagraph (1) of this paragraph, and (ii) any payments to the producer-settlement fund of another order under which such plant is also a partially regulated distributing plant.
(b) An amount computed as follows:(1) Determine the respective amounts
of skim milk and butterfat disposed of as Class I milk on routes within the marketing area;
(2) Deduct the respective amounts of skim milk and butterfat received as Class I milk at the partially regulated distributing plant from pool plants and other order plants except that deducted under a similar provision of another order issued pursuant to the Act;
(3) Combine the amounts of skim milk and butterfat remaining into one total and determine the weighted average butterfat content; and
(4) From the value of such milk at the Class I price applicable at the location of the nonpool plant, subtract its value at the weighted average price applicable at such location (not to be less than the Class I I price).
D e t e r m in a t io n of U n if o r m P rices
§ 1125.70 Computation o f the net pool obligation of each pool handler.
The net pool obligation of each pool handler (for each pool plant, when § 1125.45(b) applies) during each month shall be a sum of money computed by the market administrator as follows:
(a) Multiply the quantity of producer milk in each class, as computed pursuant to § 1125.46(c), by the applicable class prices (adjusted pursuant to §§ 1125.52, 1125.53 and 1125.54) and add together the resulting amounts;
(b) Add the amount obtained from multiplying the pounds o f overage deducted from each class pursuant to § 1125.46(a) (9) and the corresponding step of § 1125.46(b), by the applicable class prices. In case overage occurs in a nonpool plant located on the same premises as a pool plant, such overage shall be prorated between the quantity transferred from the pool plant and other source milk in such nonpool plant, and an amount equal to the value of overage allocated to the transferred quantity at the applicable class price shall also be added;
(c) Add or subtract, as the case may be, the amount necessary to correct errors as disclosed by the verification of reports of such handler of his receipts and utilizatiori of skim milk and butterfat in previous months for which payment has not been made;
(d) Add aiTkmount equal to the difference between the value at the Class I price applicable at the pool plant and the value at the Class I I price, with respect to skim milk and butterfat in other source milk subtracted from Class I pursuant to § 1125.46(a) (3) and the corresponding step of § 1125.46(b); and
(e) Add an amount equal to the value at the Class I price, adjusted for location of the nearest nonpool plant(s) from which an equivalent volume was received, with respect to skim milk and butterfat subtracted from Class I pursuant to § 1125.46(a) (6) and the corresponding step of § 1125.46(b).
§ 1125.71 Computation o f we i gh te d average price for all milk.
For each month the market administrator shall compute the weighted average price for all milk of 3.5 percent butterfat content as follows:
(a) Combine into one total the values computed pursuant to § 1125.70 for all handlers who made the reports prescribed in § 1125.30 and who made the payments pursuant to § 1125.84 for the preceding month;
(b) Add the aggregate of the values of the location adjustments on base milk allowable pursuant to § 1125.81(a) (1) and on nonpool milk pursuant to § 1125.81(c);
(c) Deduct the aggregate of the values of the location adjustments on excess milk computed pursuant to § 1125.81(a) (2) ;
(d) Add an amount representing not less than one-half the unobligated cash balance in the producer-settlement fund;
(e) Subtract, if the average butterfat content of the milk specified in paragraph (f ) of this section is greater than 3.5 percent, or add, if such average butterfat content is less than 3.5 percent, an amount by which the average butterfat content of such milk varies from 3.5 percent by the butterfat differential computed pursuant to § 1125.82 and multiplying the resulting figure by the total hundredweight of such milk;
(f ) Divide the resulting amount by the sum of the following for all handlers included in such computations:
(1) The total hundredweight of producer milk; and
FEDERAL REGISTER, VOL. 31, NO. 93— FRIDAY, MAY 13, 1966
7082
(2) The total hundredweight for which a value is computed pursuant to § 1125.70(e); and
(g) Subtract not less than 4 cents but less than 5 cents from the price computed pursuant to paragraph (f) of this section. The result shall be known as the “weighted average price for all milk” .§ 1125.72 Com p uta t i o n o f uniform
prices for base milk and excess milk.For each month the market adminis
trator shall compute the uniform prices per hundredweight for base milk and excess milk of 3.5 percent butterfat content received from producers as follows:
(a) From the net amount computed pursuant to § 1125.71(a) through (e) subtract the following:
(1) The amount computed by multiplying the hundredweight of milk specified in § 1125.71(f)(2) by the weighted average price for all milk; and
(2) The amount computed by multiplying the hundredweight of excess milk by the Class I I price for 3.5 percent milk, rounded to the nearest one-tenth cent: Provided, That if such result is greater than an amount computed by multiplying the hundredweight of base milk by the Class I price (for 3.5 percent milk) plus four cents, such amount in excess thereof shall be subtracted from the result obtained prior to this proviso;
(b) Divide the net amount obtained in paragraph (a) of this section by the total hundredweight of base milk and subtract not less than 4 cents but less than 5 cents. This result shall be known as the uniform price per hundredweight of base milk of 3.5 percent butterfat content; and
(c) Divide the amount obtained in paragraph (a) (2) of this section plus any amount subtracted pursuant to the proviso of paragraph (a) (2) of this section by the hundredweight of excess milk, and subtract any fractional part of 1 cent. This result shall be known as the uniform price per hundredweight of excess milk of 3.5 percent butterfat content.
P a y m e n t s
§ 1125.80 Time and method o f payment to producers and to cooperative asso- ciations.
(a) On or before the 19th day after the end of each month, each handler shall make payment to each producer for milk received from such producer during such month:
(1) At not less than the uniform price for base milk for the quantity of base milk received, adjusted by the butterfat differential computed pursuant to § 1125.82 and by any location adjustment applicable under § 1125.81; and
(2) At not less than the uniform price for excess milk for the quantity of excess milk received, adjusted by the butterfat differential computed pursuant to § 1125.82 and by any location adjustment applicable under § 1125.81:’ Provided, I f by such date such handler has not received full payment for such month pursuant to § 1125.85, he shall not be deemed to be in violation of this paragraph if he reduces uniformly for all producers his
PROPOSED RULE MAKINGpaytnents per hundredweight pursuant to this paragraph by a total amount not in excess of the reduction in payment from the market administrator; however, the handler shall make such balance of payment uniformly to those producers to whom it is due on or before the date for making payments pursuant to this paragraph next following that on which such balance of payments is received from the market administrator.
(b) The payments required in paragraph (a) of this section shall be made, upon request, to a cooperative association qualified under § 1125.5, or to its duly authorized agent, with respect to milk received from each producer who has given such association authorization by contract or by other written instrument to collect the proceeds from the sale of his milk, and any payment made pursuant to this paragraph shall be made on or before the 17th day after the end of such month.
(c) On or before the 17th day after the end of each month, each handler shall pay to each cooperative association which operates a pool plant for skim milk and butterfat received from such cooperative association during such month an amount of money computed by multiplying the total pounds of such skim milk and butterfat in each class (pursuant to § 1125.44(a) or (b )) by the class price, taking into account any location adjustment, as provided by §§ 1125.53 and 1125.54, applicable at the pool plant of the cooperative association.
(d) On or before the 17th day after the end of each month, each handler who receives milk for which a cooperative association is the handler pursuant to § 1125.10(f) shall pay such cooperative association for such milk at not less than the weighted average price for all milk, adjusted by the differentials specified'in §§ 1125.81(b) and 1125.82.
(e) None of the provisions of this section shall be construed to restrict-any cooperative association qualified under section 8c (5) (F) of the Act from making payment for milk to its producers in accordance with such provision of the Act.
§ 1125.81 Location adjustments to producers and on nonpool milk.
(a) In making payments to producers pursuant to § 1125.80(a), subject to the application of § 1125.12(c), the following adjustments for location are applicable:
(1) Deduction may be made per hundredweight of base milk received from producers at respective plant locations at the same per hundredweight rates as specified for Class I milk in the table set forth in § 1125.53; and
(2) Twenty-five cents per hundredweight shall be added to the uniform price for excess milk received from producers at plants located in District 1 or in the counties of Kitsap, Mason, or Pierce.
(b) In making payments to a cooperative association pursuant to § 1125.80(d) deductions may be made at the rates specified in § 1125.53 for the location of the plant at which the milk was received from the cooperative association.
(c) For purposes of computations pursuant to §§ 1125.84 and 1125.85 the weighted average price for all milk shall be adjusted at the rates set forth in § 1125.53 applicable at the location of the nonpool plant from which the milk was received.§ 1125.82 Producer butterfat differen
tial.In making payments pursuant to
§ 1125.80(a) for base milk and for excess milk and pursuant to § 1125.80(d) there shall be added to, or subtracted from, the respective uniform prices thereof or weighted average price, for each one- tenth of 1 percent that the average butterfat content of such milk is above or below 3.5 percent, a butterfat differential computed by the market administrator by multiplying the butterfat differential for Class I milk by the percentage of the butterfat contained in producer milk that is allocated to Class I, and by multiplying the remaining percentage of butterfat in producer milk by the butterfat differential for Class I I milk, adding together the resulting amounts, and rounding to the nearest tenth of a cent.§ 1125.83 Producer-settlement fund.
The market administrator shall establish and maintain a separate fund known as the “producer-settlement fund,” into which he shall deposit all payments made by handlers pursuant to §§ 1125.67 and 1125.84 and out of which he shall make all payments to handlers pursuant to § 1125.85.§ 1125.84 Payments to the producer-
settlement fund.On or before the 15th day after the
end of the month during which the milk was received, each handler shall pay to the market administrator the amount, i f any, by which the total amount specified in paragraph (a) of this section exceeds the total amount specified in paragraph (b) of this section:
(a) The sum of:(1) The net pool obligations computed
pursuant to § 1125.70 for such handler; and
(2) For a cooperative association handler, the amount due from other handlers pursuant to § 1125.80(d);
(b) The sum of:(1) The value of milk received by such
handler from producers at the applicable uniform prices specified in § 1125.80 (a );
(2) The amount to be paid to cooperative associations pursuant to § 1125.80 t d ) ; and
(3) The value at the weighted average price for all milk applipable at the location of the plant(s) from which received (not to be less than the value at the Class n price) adjusted for butterfat content by the producer butterfat differential, with respect to other source milk for which a value is computed pursuant to § 1125.70(e).§ 1125.85 Payments out of the pro
ducer-settlement fund.On or before the 17th day after the
end of each month during which the
FEDERAI REGISTER, VOL. 31, NO. 93— FRIDAY, MAY 13, 1966
PROPOSED RULE MAKING 7083
milk was received, the market administrator shall pay to each handler the amount, if any, by which the amount computed pursuant to § 1125.84(b) exceeds the amount computed pursuant to § 1125.84(a), and less any unpaid obligations of such handler to the market administrator pursuant to §§ 1125.84, 1125.86, 1125.87, and 1125.88: Provided, That if the balance in the producer-settlement fund is insufficient to make all payments pursuant to this paragraph, the market administrator shall reduce uniformly such payments and shall complete such payments as soon as the necessary funds are available.§1125.86 Adjustments o f accounts.
Whenever verification by the market administrator of' reports or payments of any handler discloses errors resulting in money due:
(a) The market administrator from such handler,
(b) Such handler from the market administrator, or
(c) Any producer or cooperative association from such handler, the market administrator shall promptly notify such handler of any amount so due and payment thereof shall be made on or before the next date for making payments set forth in the provisions under which such error occurred following the 5th day a fter such notice.§ 1125.87 Marketing services.
(a) Except as set forth in paragraph (b) of this section, each handler, in making payments to producers (other than with respect to milk of such handler’s own production) pursuant to § 1125.80 (a ), shall make a deduction of 5 cents per hundredweight of milk, or such amount not exceeding 5 cents per hundredweight as the Secretary may prescribe, with respect to the following:
(1) All milk-received from producers at a plant not operated by a cooperative association;
(2) All milk received at a plant operated by a cooperative association from producers who are not members of such association; and
(3) All milk received at a plant operated by a cooperative association (s) from producers who are members thereof but for whom any of the services set forth below in this paragraph is not being performed by such association (s ) , as determined by the market administrator. Such deduction shall be paid by the handler to the market administrator on or before the 15 th day after the end of the month. Such moneys shall be expended by the market administrator for the verification of weights, sampling and testing of milk received from producers and in providing for market information to producers; such services to be performed in whole or in part by the market administrator or by an agent engaged by and responsible to him.
(b) In the case of each producer:(1) Who is a member of, or who has
given written authorization for the rendering of marketing service and the taking of deduction therefor to, a cooperative association,
(2) Whose milk is received at a plant not operated by such association, and
(3) For whom the market administrator determines that such association is performing the services described in paragraph (a) of this section, each handler shall deduct, in lieu of the deduction specified under paragraph (a) of this section, from the payments made pursuant to § 1125.80(a) the amount per hundredweight cn milk authorized by such producer and shall pay over, on or before the 15th day after the end of the month, such deduction to the association entitled to receive it under this paragraph.§ 1125.88 Expense o f administration.
As his pro rata share of the expense of administration of the order, each handler shall pay to the market administrator on or before the 15 th day after the end of the month 4 cents per hundredweight, or such lesser amount as the Secretary may prescribe, with respect to (a) producer milk (including such handler’s own production), (b) other source milk allocated to Class I pursuant to § 1125.46(a) (3) and (6) and the corresponding steps of § 1125.46(b), and (c) packaged Class I milk disposed of on routes within the-marketing area from a partially regulated distributing plant which exceeds Class I milk received during the month at such plant from pool plants and other order plants.§ 1125.89 Termination of obligations.
The provisions of this section shall apply to any obligation under this part for the payment of money.
(a) The obligation of any handler to pay money required to be paid under the terms of this part shall, except as provided in paragraphs (b) and (c) of this section, terminate 2 years after the last day of the calendar month during which the market administrator receives the handler’s utilization report on the milk involved in such obligation, unless within such 2-year period the market administrator notifies the handler in writing that such money is due and payable. Service of such notice shall be complete upon mailing to the handler’s last-known address, and it shall contain, but need not be limited to, the following information:
(1) The amount of the obligation;(2) The month(s) during which the
milk, with respect to which the obligation exists, was received or handled; and
(3) I f the obligation is payable to one or more producers or to an association of producers, the name of such producer (s) or association of producers, or i f the obligation is payable to the market administrator, the account for which it is to be paid.
(b) I f a handler fails or refuses, with respect to any obligation under this part, to make available to the market administrator or his representatives all books and records required by this order to be made available, the market administrator may, within the 2-year period provided for in paragraph (a) of this section, notify the handler in writing of such failure or refusal. I f the market administrator so notifies a handler, the
said 2-year period with respect to such obligation shall not begin to run until the first day of the calendar month following the month during which all such books and records pertaining to such obligation are made available to the market administrator or his representatives.
(c ) Notwithstanding the provisions of paragraphs (a) and (b) of this section, a handler’s obligation under this part to pay money shall not be terminated with respect to any transaction involving fraud or willful concealment of a fact, material to the obligation on the part of the handler against whom the obligation is sought to be imposed. _
(d) Any obligation on the part of the market administrator to pay a handler any money which such handler claims to be due him under the terms of this order shall terminate 2 years after the end of the month during which the milk involved in the claims was received if an underpayment is claimed, or 2 years after the end of the month during which the payment (including deduction or setoff by the market administrator) was made by the handler if a refund on such payment is claimed, unless such handler, within the applicable period of time, files, pursuant to section 8c(15) (A ) of the Act, a petition claiming such money.
E ffective T im e , S u s p e n s io n , or T e r m in a t io n
§ 1125.90 Effective time.The provisions of this part or any
amendment to this part shall become effective at such time as the Secretary may declare and shall continue in force until suspended or terminated pursuant to § 1125.91.§ 1125.91 Suspension or termination.
The Secretary may suspend or terminate this part or any provision of this part whenever he finds this part or any provision of this part obstructs or does
-not tend to effectuate the declared policy of the Act. This part shall terminate in any event whenever the provisions of the Act authorizing it cease to be in effect.§ 1125.92 Continuing obligations.
If, upon the suspension or termination of any or all provisions of this part, there are any obligations thereunder the final accrual or ascertainment of which requires further acts by any person (including the market administrator), such further acts shall be performed notwithstanding such suspension or termination.
§ 1125.93 Liquidation.
Upon the suspension or termination of the provisions of this part, except this section, the market administrator, or such other liquidating agent as the Secretary may designate, shall if so directed by the Secretary liquidate the business of the market administrator’s office, dispose of all property in his possession or control, including accounts receivable and execute and deliver all assignments or other instruments necessary or appropriate to effectuate any such disposition. I f a liquidating agent is so designated, all
FEDERAL REGISTER, V O L 31, NO. 93— FRIDAY, MAY 13, 1966
7084 PROPOSED RULE MAKINGassets, books and records of the market administrator shall be transferred promptly to such liquidating agent. If, upon such liquidation, the funds on hand exceed the amounts required to pay outstanding obligations of the office of the market administrator and to pay necessary expense of liquidation and distribution, such excess shall be distributed to contributing handlers and producers in an equitable manner.
M isc e lla n e o u s P r o visio ns
§ 1125.100 Agents.The Secretary may, by designation in
writing, name any officer or employee of the United States to act as his agent or representative in connection with any of the provisions of this part.§ 1125.101 Separability o f provisions.
I f any provision of this part, or its application to any person or circumstances, is held invalid, the application of such provision and of the remaining provisions of this part, to other persons or circumstances shall not be affected thereby.[F.R. Doc. 66-5255; Filed, May 12, 1966;
8:50 a.m.]
FEDERAL AVIATION AGENCY[ 14 CFR Part 37 1
[Docket No. 7356; Notice No. 66-19]
CARGO AND BAGGAGE COMPARTMENT SMOKE DETECTION EQUIPMENT
Proposed Technical Standard OrderThe Federal Aviation Agency is con
sidering amending § 37.111 of the Federal Aviation Regulations to revise the technical standard order (TSO-Cla) for smoke detectors. This amendment would change the title to indicate more clearly the TSO scope and purpose and would eliminate reference to industry specifications. Substantively, the proposal contains standards reflecting new type smoke detector instruments and reducing sensitivity standards of some existing type instruments.
Interested persons are invited to participate in the making of the proposed rule by submitting such written data, views, or arguments as they may desire. Communications should identify the docket number and be submitted in duplicate to the Federal Aviation Agency, Office of the General Counsel, Attention : Rules Docket, 800 Independence Avenue SW., Washington, D.C., 20553. All communications received on or before August 12, 1966, will be considered by the Administrator before taking action upon the proposed rule. The proposals contained in this notice may be changed in the light of comments received. All comments will be available, both before and after the closing date for comments, in the Rules Docket for examination by interested persons.
In order to update the industry specification referenced in the present TSO-
Cla, the performance standards applicable to smoke detector instruments would be set forth in a new Federal Aviation Standard applicable to cargo and baggage compartment detectors.
Under the present TSO-Cla, there are two classes of smoke detectors: i.e. carbon monoxide (CO) detectors and photoelectric detectors. T h i s amendment would provide for a third type of smoke detector which operates on the principle of visual detection of the presence of smoke by directly viewing air samples. With respect to the smoke detectors of the types covered by the current TSO, the proposed amendment relaxes the response time requirement and reduces the sensitivity settings. For all types of detectors there is added an explosion protection design requirement. O t h e r changes would modify the temperature, altitude, and vibration ranges through which the instruments must properly function, in order to make these environmental conditions more representative of the ranges encountered by modem aircraft. In this regard, the proposal differentiates the vibration resist1 ance required for devices to be used on piston engine and turbine engine-powered aircraft.
The detailed test procedures of the current TSO would be replaced by an objective standard under which the manufacturer would conduct tests as necessary to demonstrate proper design and instrument reliability while performing its intended function.
In consideration of the foregoing, it is proposed to amend § 37.111 of the Federal Aviation Regulations to read as follows:
§ 37.111 Cargo and baggage compartment smoke detection instrument— TSO -C lb .
(a) Applicability. This technical standard order prescribes the minimum performance standards that cargo and baggage compartment smoke detection instruments must meet in order to be identified with the applicable TSO marking. New models of equipment that are to be so identified, and that are manufactured on or after the effective date of this section, must meet the requirements of the “Federal Aviation Standard, Cargo and Baggage Compartment Smoke Detection Instruments” set forth at the end of this section.
(b) Marking. In addition to the markings specified in § 37.7, the equipment must be marked to indicate the following:
(1) Eligibility for installation in either piston or turbine-powered aircraft, or both.
(2) Operational ratings (electrical, vacuum, etc.).
(c) Data requirements. The technical data to be submitted in accordance with § 37.5(a) (2) is as follows:
(1) Seven copies of the manufacturer’s operating instructions, equipment limitations, and installation procedures; and
(2) One copy of the manufacturer’s test report.
(d) Previously approved equipment. Smoke detector models approved prior to the effective date of this section may continue to be manufactured under the provisions of their original approval.F ederal A v ia t io n S tandard C argo and
B aggage C o m par tm ent Sm o k e D etect io n I n s t r u m e n t s
1. Purpose. This document provides minimum performance standards and test procedures for cargo and baggage compartment smoke detector instruments which are to be approved under this TSO.
2. Classification. Smoke detection instruments are classified by method of detection as follows:Type I—Measurement of carbon monoxide
gas (CO detectors).Type II— Measurement of light transmissi-
bility in air (photoelectric devices).Type III—Visual detection of the presence
of smoke by directly viewing air samples (visual devices).
3. Minimum performance standards. Except where otherwise indicated, the minimum performance standards of this section are applicable to Types I, II, and I I I instruments.
3.1 Type characteristics. The instruments must perform as follows:
Type I : By testing air for carbon monoxide content, the instrument must be capable of actuating an alarm (or control) circuit at all concentrations of CO that are 0.025 percent ancTgreater by volume. At concentrations over 0.015 but less than 0.025 percent the instrument may actuate the circuit but at concentrations 0.015 percent and less it must not actuate the circuit.
Type n : By testing air for smoke content of all colors or particle sizes, the instrument mùst be capable of actuating an alarm (or control) circuit to indicate the presence of smoke particles at all concentrations at which the light transmission percentage is 60 percent or less. At light transmission percentages over 60 but less than 90, the instrument may actuate the circuit but at percentages 90 and over, it must not actuate the circuit. Light transmission percentage is defined as the light falling on a photoelectric cell through a 1-foot distance occupied by smoke particles in air, expressed as a percentage of the light trasmitted through 1 foot of clear air. The light intensity is to be so adjusted that the cell output with a 50 percent transmission screen is 50 percent of the output of the unobscured cell.
Type n i : By testing air for the presence of smoke of all colors or particle sizes, the instrument must provide a visual display to clearly indicate all smoke concentrations in which the light transmission percentage is 60 percent or less. The instrument may, but is not required to, indicate smoke concentrations for which the light transmission percentage is over 60. Light transmission percentage is as defined for Type I I instruments.
3.2 Materials. Smoke detection instruments must be constructed of materials of a quality that experience or
FEDERAL REGISTER, VOL. 31, NO. 93— FRIDAY, MAY 13, 1966
PROPOSED RULE MAKING 7085
tests or both have demonstrated to be suitable and dependable for use in aircraft application.
3.3 False alarm signals. Type I and Type I I instruments conforming to the requirements of this standard must not actuate the alarm (or control) circuit as a result of dust and haze normally present in the cargo compartment, nor of the dust that normally accumulates within the instrument. The design must be such that the instrument will not produce a false alarm (or control) signal as a result of abnormal attitudes, ambient light conditions, variations in voltage between 0 and 125 percent of the rated value, nor of accelerations encountered during takeoff, flight, and landing.
3.4 Functional test provisions. Type I and Type I I instrument design must incorporate a means for testing the functioning of the system in flight.
3.5 Response time. Type I and Type n instruments must be designed to actuate an alarm (or control) circuit and Type H I instruments to show visually the presence of smoke, within a maximum time period of 1 minute after an air sample, applicable to the type of instrument, is introduced at a sampling station.
3.6 A ir sampling cycle. An instrument designed to sample the air from more than one sampling station on a cycling basis must cycle at a rate sufficient to sample all stations within a total time of 1 minute. When an alarm signal is given, the signal must indicate the location in which the smoke or gas is being detected and must continue to do so until the condition is eliminated. The instrument must begin cycling in a normal manner within 30 seconds after the alarm signal is cleared.
3.7 Environmental ranges. The design of any instrument conforming to this standard must insure that it is capable of functioning without being adversely affected following prolonged exposure to the ranges of environmental conditions as stated under section 4.
3.8 Power variation. Each instrument type must be designed to insure proper functioning with the following variations of power parameters (where applicable) from rated values: d.c. voltage, ±15 percent; a.c. voltage, ±10 percent; frequency, ±5 percent.
3.9 Explosion protection. Where the instrument is intended to be installed in areas of the airplane where flammable fluids or vapors might be liberated by leakage or failure in fluid systems, design precautions must be made to safeguard against the ignition of such fluids or vapors due to operation of the instrument.
3.10 H u m i d i t y . Each instrument type must be designed to function properly and not be adversely affected fo llowing exposure to any relative humidity in the range from 0 to 95 percent at a temperature of approximately 70° C.
3.11 Fire hazard. Each instrument type must be designed to safeguard against hazards to the aircraft in the event of malfunction or failure. The maximum operating temperature of any
instrument-component surface that comes in contact with air samples must not exceed 200° C.
4. Environmental conditions.4.1 Temperature. Each instrument
type must be designed to function properly over the range of ambient temperatures shown in Column A below and not be adversely affected by exposure to the range of temperature shown in Column B below:
Instrument location A B
Heated areas (tem- -30° to 50° C. -65° to 70° C;perature controlled). -65° to 79° C;Unheated areas (tem- -55° to 70° C.perature uncontrolled).
4.2 Altitude. Each instrument type must be designed to function properly from sea level up to the altitudes listed below. The instrument must not be adversely affected when subjected to an ambient pressure of 50 inches of mercury absolute.
AltitudeInstrument location '* (feet)Pressurized areas------------- -— ---------- 15, 000Nonpressurized areas____________ _— 45, 000
4.3 Vibration. Each instrument type must be designed to function properly and not be adversely affected when subjected to vibrations of the following characteristics:
Frequencycyclesper
second
Maximum double amplitude in inches
Maximum
acceleration
Piston engine powered: Wings or empennage. 6-600 0.036 10gFuselage__________ 6-500 .036 5gPanel or rack______ 5-50 .020 1.5g
(vibration isolated) Turbine engine
powered:Fuselage
Forward of spararea..... .......... 5-500 .036 2g
Center of spar area.. 5-1000 .036 4gAft of spar area___ 5-500 .036 7g
500-1000 6gVibration isolated
rack__________ 6-1000 .030 lgInstrument panel_ 6-30 .020
30-1000 .25g
5. Qualification tests. As evidence of compliance with this standard, the applicant must perform evaluation tests on prototype instruments to demonstrate proper design, reliability in performance of its intended functions, and conformity with the performance standards of section 3. Tests and test procedures employed for this purpose must reasonably demonstrate the absence of any adverse effect on the instrument’s performance due to the following factors: power variations, pressure and altitude changes, humidity changes, high and low temperature conditions, airplane vibrations and prolonged operational usage.
6. Individual performance. Each instrument manufactured in accordance with this standard must be capable of meeting all the performance standards under section 3. Each instrument must be tested so that when an air sample applicable to the type of instrument per
section 3.1 is introduced into the instrument under standard atmospheric conditions, the alarm (or control) circuit is actuated (for Type I and I I instruments) , or the visual display occurs (for Type I I I instruments), in One minute or less.
This amendment is proposed under the authority of sections 313(a) and 601 of the Federal Aviation Act of 1958 (49 U.S.C. 1354(a) and 1421).
Issued in Washington, D.C., on May 9, 1966.
Jam es F . R u d o l p h , Acting Director,
Flight Standards Service.[F.R. Doc. 66-5248; Filed, May 12, 1966;
8:49 am .]
[ 14 CFR Part 75 1[Airspace Docket No. 66-WA-5]
JET ROUTES Proposed Realignment
The Federal Aviation Agency (FAA) is considering amendments to Part 75 of the Federal Aviation Regulations which would realign Jet Routes Nos. 560 and 563.
Interested persons may participate in the proposed rifle making by submitting such written data, views, or arguments as they may desire. Communications should identify the airspace docket number and be submitted in triplicate to the Federal Aviation Agency, Office of the General Counsel, Attention: Rules Docket, 800 Independence Avenue SW., Washington, D.C., 20553. All communications received within 30 days after publication of this notice in the F ederal R egister will be considered before action is taken on the proposed amendments. The proposals contained in the notice may be changed in the light of comments received. All comments submitted will be available in the Rules Docket for examination by interested persons, both before and after the closing date for comments.
Jet Route No. 560 is presently designated from Plattsburgh, N.Y., VORTAC via the Plattsburgh VORTAC 037° T radial (toward Montmorency, Quebec, Canada, radio beacon) to the United States/Canadian border. This jet route adjoins Canadian High Level Airway No. 560 and Jet Route No. 560 which are designated from Montmorency radio beacon to the United States/Canadian border. The Canadian Department of Transport (DOT) plans to realign their portion of this high level airway/jet route via Quebec, Quebec, Canada, VOR and has requested that the FAA take corresponding action so that the jet routes/airway will adjoin at the border.
Jet Route No. 563 is presently designated from Plattsburgh VORTAC via Plattsburgh to Sherbrooke, Quebec, Canada, VOR direct radial to the United States/Canadian border. The Canadian DOT has requested the FAA to redesignate this jet route from Albany, N.Y., VORTAC via IN T of the Albany, N .Y„ TAC 008° T (021° M ) and the Sher-
FEDERAL REGISTER, V O L 31, NO. 93— FRIDAY, MAY 13, 1966
7086
brooke VOR 217° T (234° M ) radials to Sherbrooke VOR.
Redesignation of J-560 and J-563 as proposed herein would facilitate air navigation and the provision of air traffic service for transborder flights.
These amendments are proposed under the authority of sec. 307(a) of the Federal Aviation Act of 1958 (49 U.S.C. 1348).
Issued in Washington, D.C., on May 9, 1966.
H. B. H elstrom,Acting Chief, Airspace and
Air Traffic Rules Division.[F.R. Doc. 66-5249; Filed, May 12, 1966;
8:49 a.m.]
FEDERAL COMMUNICATIONS COMMISSION
[ 47 CFR Parts 2, 87 1[Docket No. 16621]
AERONAUTICAL ADVISORY SERVICENotice of Proposed Rule Making;
CorrectionIn the matter of amendment of Parts
2 and 87 to change the rules governing the aeronautical advisory service.
In the notice of proposed rule making in the above-entitled matter, FCC 66-401,
PROPOSED RULE MAKINGadopted May 4, 1966, the Docket No. is corrected to read “ 16621.”
Released: May 10,1966.F ederal C o m m u n ic a t io n s
C o m m is s io n ,[ se al ] B e n F . W a ple ,
Secretary.[F.R. Doc. 66-5257; Filed, May 12, 1966;
8:50 a.m.]
[ 47 CFR Part 73 1[Docket No. 11279]
SUBSCRIPTION TELEVISION SERVICESOrder Extending Time for Submission
of Technical Data1. In a further notice of proposed rule
making and notice of inquiry adopted March 21, 1966 (3 FCC 2d 1), in this proceeding parties were requested (par. 39) to submit within 60 days from the date of adoption detailed specifications of their present or proposed systems for over-the-air subscription television or to update submissions previously made. The purpose of this requirement is to permit the Commission, if it ultimately makes a decision that nation-wide subscription television on a permanent basis should be authorized, to proceed expeditiously.
2. On April 22, 1966, International Telemeter Corp. filed a request for extension of time to June 22,1966, in which to submit detailed specifications for its subscription television system. As reason for its request it states that the time is essential for it to prepare a meaningful presentation based on its experimental over-the-air operations in Los Angeles
and on its subscription television operations in Etobicoke, Canada.
3. On May 2, 1966, Zenith Radio Corp. and Teco, Inc., filed a joint statement requesting that if an extension to June 22 is granted, it should cover all parties desiring to submit technical data so that the filing date will be uniform.
4. Since it is important for the Commission to have thorough and meaningful information on this subject to arrive at ultimate decisions in the public interest, it appears that the requests should be granted.
5. In view of the foregoing: I t is ordered, This 9th day of May 1966, That the “Request for Extension of Time in Which To Submit Detailed Specifications To Update Technical Information Heretofore Submitted by International Telemeter Corp.,’* and the request made in the “Statement of Zenith Radio Corp. and Teco, Inc., Concerning International Telemeter Corp.’s Request for Extension of Time in Which To File Technical In formation” are granted, and the date for submitting technical information as mentioned in paragraph 1 above is extended to and including June 22, 1966.
6. This action is taken pursuant to authority found in sections 4 (i ) , 5(d) (1), and 303 (r) of the Communications Act of 1934, as amended, and § 0.281(d) (8) of the Commission’s Rules.
Released: May 9, 1966.
F ederal C o m m u n ic a t io n s C o m m is s io n ,
[ seal ] B e n F . W a ple ,Secretary.
[F.R. Doc. 66-5258; Filed, May 12, 1966; 8:50 a.m.]
FEDERAL REGISTER, VOL. 31, NO. 93— FRIDAY, MAY 13, 1966
7087
NoticesDEPARTMENT OF THE TREASURY
Office of Foreign Assets ControlIMPORTATION Of CERTAIN MER
CHANDISE DIRECTLY FROM REPUBLIC OF KOREA
Available Certifications by Government of Republic of Korea
Notice is hereby given that certificates of origin issued by the Ministry of Commerce and Industry of the Republic of Korea under procedures agreed upon between that Government and the Office of Foreign Assets Control in connection with the Foreign Assets Control Regulations are now available with respect to the importation into the United States directly, or on a through bill of lading, from Korea of the following additional commodity:
Silk piece goods, tussah.
[ seal] M argaret W. S chw artz , Director, Office of
Foreign Assets Control.[F.R. Doc. 66-5288; Filed, May 12, 1966;
8:51 a.m.]
Office of the Secretary[Antidumping— ATS 643.3-m]
WORK SHOES FROM CZECHOSLOVAKIA
Determination of Sales at Less Than Fair Value
M a y 6,1966.On January 29, 1966, there was pub
lished in the F ederal R egister a ‘‘Notice of Tentative Determination" that shoes, leather, men’s and boys’, imported from Czechoslovakia are not being, nor likely to be, sold at less than fair value within the meaning of section 201(a) of the Antidumping Act, 1921, as amended (19 U.S.C. 160(a)).
The statement of reasons for the tentative determination was published in the above-mentioned notice, and interested parties were afforded until February 28, 1966, to make written submissions or requests for an opportunity to present views in connection with the tentative determination.
After consideration of all comments received, I hereby determine that work- shoes, leather, men’s and boys’, imported from Czechoslovakia are being, or are likely to be, sold at less than fair value within the meaning of section 201(a) of the Antidumping Act, 1921, as amended.
Statement of new or additional reasons. In response to the "Notice of Tentative Determination” pursuasive evidence and argument was presented which convinced the Department that no determination should be made that
there are not, and are not likely to be, sales at less than fair value of work- shoes, leather, men’s and boys’, from Czechoslovakia.
The evidence presented indicated that estimates relied on in the tentative determination for differences in material, quality, and construction were not in accordance with the true differentials between the compared work shoes. Further inquiry was conducted which revealed that the allowances made for these factors should be revised. Adjustments made to reflect this new information disclosed that constructed value of the work shoe was higher than thei>ur- chase price.
This determination and the statement of reasons therefor are published pursuant to section 201(c) of the Antidumping Act, 1921, as amended (19 U.S.C. 160(c)).
[ seal] James P omeroy H endrick , Acting Assistant Secretary
of the Treasury.[F.R. Doc. 66-5236; Filed. May 12, 1966;
8:48 a.m.]
DEPARTMENT OF THE INTERIORBureau of Land Management
NEVADANotice of Filing of Protraction
DiagramsM a y 5, 1966.
Notice is hereby given that effective at and after 10 a.m., June 13,1966, the following protraction diagrams are officially filed of record in the Nevada Land Office. In accordance with Title 43, Code of Federal Regulations, these protractions will become the basic record for describing the land for all authorized purposes. Until this date and time the diagrams have been placed in open files and are available to the public for information only.Nevada Protraction Diagrams—Nos.
Through 307MOUNT DIABLO MERIDIAN
No. 183T. 13 N., R. 68 E.
183
T. 12 N., R. 68 E. T. 13 N., R. 69 E.
T. 9 N., R. 62 E. T. U N . , R.62E.
T. 15 N., R. 59 E. T. 15 N., R. 60 E.
T. 19 N., R. 65 E. T. 19 N., R. 66 E.
T. 17 N., R. 65 E. T. 18 N., R. 65 E.
No. 184T. 10 N., R. 62 E.
No. 185T. 15 N., R. 61 E.
No. 186T. 20 N., R. 65 E.T. 20% N., R. 65 E.
No. 187T. 17 N., R. 66 E.T. 18 N., R. 66 E.
T. 16 N., R. 65 E. T. 14 N., R. 66 E.
T. 6 S., R. 60 E. T. 5 S., R. 61 E. T. 6 S., R. 61 E.
T. 7 S., R. 60 E. T. 8 S., R. 60 E. T. 8 S., R. 61 E.
T. 5 S., R. 63 E. T. 6 S., R. 63 E
T. 13 N., R. 48 E.
T. 14 N ..R .48E.T. 15 N., R.48E.T. 14 N., R. 48% E.
T. 12 N., R. 47 E. T. 11 N., R. 48 E.
T. 19 N., R. 68 E. T. 20 N., R. 68 E.
T. 7 N., R. 65 E. T. 8 N., R. 65 E. T. 8 N., R. 66 E.
T. 9 N., R. 64 E. T. 10 N., R. 64 E. T. 9 N., R. 65 E.
T. 6 N., R. 65 E.
T.6 S.,R. 67 E.
T. 7 S., R. 64 E. T. 8 S., R. 64 E. T. 7 S., R. 65 E.
T .5S., R. 64 E. T. 6 S., R. 64 E. T. 5 S., R. 65 E.
T. 15 N., R. 52 E.
T. 19 N., R. 54 E. T. 19 N„ R. 55 E.
T. 19 N., R. 51 E. T. 20 N., R. 51 E.
T. 24 N., R. 40 E.
T. 16 N., R. 50 E.
T. 17 N., R. 50 E.
T. 20 N., R. 50 E.
No. 188T. 15 N., R. 66 E.T. 16 N., R. 66 E.
No. 189T .5S ., R.62 E.T. 6S., R. 62 E.
NO. 190T. 7 S., R. 62 E.T. 8 S., R. 62 E.
No. 191T. 7 S„ R. 63 E.T. 8 a , R. 63 E.
No. 192T. 13% N., R. 49 E.
NO. 193T. 15 N., R. 48% E. T. 14 N., R. 49 E.T. 15 N., R. 49 E.
No. 194T. 12 N., R. 48 E.
No. 195T. 20% N„ R. 68 E.
No. 196T. 7 N., R. 67 E. T. 8 N., R. 67 E.
NO. 197T. 10 N., R. 65 E. T. 9 N., R. 66 E.T. 10 N., R. 66 E.
No. 198
NO. 199T. 5 S„ R. 67 E.
No. 200T. 8 a , R. 65 E.
\ T. 8 S., R. 66 E. ,
No. 201T. 6 a, R. 65 E. T. 5 a, R. 66 E.
/No. 202
T. 16 N., R. 52 E.
No. 203T. 20 N., R. 55 E.
No. 204T. 19 N., R. 52 E. T. 20 N., R. 52 E.
No. 205T. 25 N., R. 40 E.
No. 206
No. 207
No. 208
FEDERAL REGISTER, VOL. 31, NO. 93— FRIDAY, MAY 13, 1966No. 93- -9
7088 NOTICESNo. 209
T. 33 N., R. 34 E. T. 33 N., R. 34% E.
T. 32 N., R. 34% E.No. 210
No. 211T. 9 N., R. 39 E.T. 10 N., R. 39 E. '
T. 9 N., R. 40 E. T. 10 N., R. 40 E.
No. 212
T. 8 N., R. 41 E. T. 8 N., R. 42 E.
No. 213 -
T .9N ..R . 41 E.T. 10 N., R. 41 E.T. 10% N., R. 41 E.
T. 9 N., R. 42 É. T. 10 N., R. 42 E.
No. 214
T. 5 N., R. 42 E. T. 6 N., R. 42 E.
No. 215
T. 4 N., R. 42 E.No. 216
T. 24 N., R. 46 E. T. 23 N., R. 47 E.
T. 24 N., R. 47 E.
No. 217
T. 21 N., R. 45 E. T. 22 N., R. 45 E. T. 21 N., R. 46 E.
T. 22 N., R. 46 E. T. 22 N., R. 47 E.
No. 218T. 19 N., R. 42 E. T. 20 N., R. 42 E.
T. 19 N., R. 43 E. T. 20 N., R. 43 E.
No. 219
T. 16 N., R. 42 E. , T. 17 N., R. 42 E.
T. 16 N., R. 43 E. T. 16 N., R. 44 E.
No. 220
T. 17 N., R. 40 E. T. 17 N., R. 41 E.
T. 18 N., R. 41 E.
No. 221T. 16 N., R. 41 E.
No. 222T. 9 N., R. 44% E. T. 10 N., R. 44 E.
No. 223
T. 13 N., R. 45 E.T. 13% N., R. 45 E. T. 12 N., R. 46 E.T. 13 Ni, R. 46 E.
No. 224
T. 10 N., R. 44% E. T. 11 N., R. 45 E.T. 11 N., R. 44% E. T. 10 N., R. 46 E.T. 10 N., R. 45 E.
No. 225
T. 14 N., R. 46 E.T. 15 N., R. 46 E.T. 14 N., R. 47 E.T. 15 N., R. 47 K
No. 226
T. 11 S„ R. 69 E. T. 12 S., R. 69 E. T. 11 S., R. 70 E.
T. 12 S.. R. 70 E. T. 11 S., R. 71 E. T. 12 S., R. 71 E.
No. 227
T. 6 S., R. 71 E. T. 7 S., R. 71 E.
T. 8 S., R. 71 E.
No. 228
T. 7 S., R. 68 E. T. 8 S., R. 68 E. T. 7 S., R. 69 E.
T. 8 S., R. 69 E. T. 7 S., R. 70 E. T. 8&., R. 70 E.
No. 229
T. 5 S., R. 68 E. T. 6 S., R. 68 E.
T. 6 a , R. 69 E. T. 6 S., R. 70 E.
T. 14 N., R. 45 E.T. 14 N., R. 45% E. T. 15 N., R. 45 E.T. 15 N., R. 45% E.
T. 13 N., R. 44 E.T. 12 N., R. 44% E. T. 13 N., R. 44% E. T. 12 N., R. 45 E.
T. 16 N., R. 39 E. T. 16 N., R. 40 E.
T. 9 N., R. 43 E. T. 9 N., R. 44 E.
No. 230T. 11 N., R. 41 E. T. 11 N., R. 42 E. T. 14 N., R. 39 E.T. 12 N., R. 41 E. T. 12 N., R; 42 E. T. 14 N., R. 40 E.
T. 13 N., R. 41 E.No. 231
T. 13 N., R. 43 E. T. 12 N., R. 39 E. T. 13 N., R. 39 E.T. 13 N., R. 42 E. T. 14 N., R. 43 E.
T. 14 N.. R. 42 E.
T. 15 N., R. 42 E.NO. 232
T. 14 N., R. 44 E.
T. 11 N., R. 40 E.
T. 9 N., R. 36 E.T. 15 N., R. 43 E. T. 10 N., R. 36 E.
T. 8 N.; R. 49 E.No. 233
T. 8 N., R. 51 E.
T. 9 N., R. 37 E.
T. 6 N., R. 36^3.T. 8 N., R. 50 E. T. 6 N., R. 37 E.
T. 7 N., R. 49 E.No. 234
T. 6 N., R. 50 E.T. 8 N., R. 36 E. T. 7 N., R. 37 E.
T. 6 N., R. 49 % E. T. 7N..R . 50 E. T. 8 N., R. 37 E.
T. 9 N., R. 47 E.No. 235
T. 9 N., R. 48 E. - T. 39 N., R. 24 E.T. 10 N., R. 47 E. T. 10 N., R. 48 E. T. 40 N., R. 24 E.T. 9 N., R. 47% E. T. 9 N.. R. 49 E.T. 10 N., R. 47% E. T. 10 N., R. 49 È.
No. 236 T. 37 N., R. 23% E.
T. 7 N., R. 46% E. T. 7 N., R. 47% E.T. 37 N., R. 24 E. T. 37 N., R. 26 E.
T. 7 N., R. 47 E. T. 6% N., R. 48 E.T. 6% N., R. 47% E. T. 7 N., R. 48 E.
No. 237 T. 36 N., R. 23% E.T. 9 N.. R. 49% E. T. 10 N., R. 50 E. T. 36 N., R. 24 E.T. 10 N., R. 49% E. T. 9 N., R. 51 E.T. 9 N., R. 50 E. T. 38% N.. R. 27 E.
No. 238 T. 39 N., R. 27 E.T. 4 S., R. 57 E. T. 4 S.. R. 58 E. T. 40 N., R. 27 E.
No. 239T*. 39 N., R. 28 E.T. 39% N., R. 28 E.
T. 4 S., R. 65 E. T. 3 S., R. 66 E.No. 240 T. 36 N., R. 27 E.
T. 1 S., R. 66 E. T. 2 S., R. 66 E. T. 36 N., R. 28 E.
T. 1 S., R. 36 E.No. 241
T. 1 S., R. 37 E. T. 37 N., R. 27 E.T. 38 N., R. 27 E_
No. 242 T. 37 N., R. 28 E.T. 4 S., R. 37 E. T. 5 a , R. 37 E.
No. 243 T. 18 N., R. 63 E.T. 2 S., R. 34 E. T. 3 S., R. 35 E.T. 3 S., R. 34 E. T. 14 N., R. 24 E.
T. 2 S., R. 36 E.No. 244
T. 2 S., R. 37 E.T. 26 N., R. 19 E.
T. 3 S., R. 36 E. T. 3 S., R. 37 E.
T. 1 S., R. 32 E.NO. 245
T. 2 S., R. 33 E.
T. 22 N., R. 34 E.
T. 6 N.. R. 32 E.T. 1 S., R. 33 E.
No. 246 T. 18 N., R. 38 E.T. 43 N., R. 51 E.
T. 42 N., R. 49 E.No. 247
T. 43 N., R. 50 E. T. 16 N., R. 22 E.T. 42 N., R. 50 E.
No. 248 T. 3 N., R. 32 E.
T. 1 S., R. 70 E. T. 2 S., R. 71 E.T. 2 S., R. 70 E. T. 1 S.. R. 57 E.
No. 249 T. 1 N., R. 56 E.T. 21 N., R. 38 E.
T. 6 S., R. 39 E.No. 250
T. 7 S., R. 40 E.T. 10 N., R. 28 E. T. 11 N., R. 28 E.
T. 7 S., R. 39 E. T. 8 S., R. 40 E,T. R S.. R. 39 E. _____________
NO. 251 T. 12 N., R. 28 E.
T. 9 S., R. 40 E. T. 10 S., R. 41 E.T. 12 N., R. 27 E.T. 9 S., R. 41 E. T. 10 S., R. 42 E.
No. 252 T. 13 N., R. 27 E.
T. 27 S., R. 62% E.NO. 253 T. 10% N., R. 30 B.
T. 25 N., R. 63 B. T. 10 N., R. 31 E.
No. 254T. 15 N., R. 40 E.T 15 N., R. 41 E.
No. 255T. 12 N., R. 40 E.T. 13 N., R. 40 E.
No. 256
No. 257' T. 10 N., R. 37 E.T. 9 N., R. 37% E. T. 10 N., R. 37% E.
No. 258T. 6 N., R. 37% E.
No. 259T. 7 N., R. 37% E. T. 8 N., R. 37% E.
No. 260T. 39 N., R. 25 E.T. 40 N., R. 25 E.
No. 261
T. 38 N., R. 24 E.T. 38 N., R. 25 E.T. 38 N„ R. 26 E.
No. 262
T. 36 N., R. 25 E.
No. 263
T. 40 N., R. 28 E.T. 40% N., R. 28 E. T. 39 N., R. 29 E.T. 40 N., R. 29 E.T. 40% N., R. 29 E.
No. 264
T. 36 N., R. 29 E.
No. 265
T. 38 N., R. 28 E.T. 37 N., R. 29 E.T. 38 N., R. 29 E.
No. 266T. 19 N., R. 63 E.
No. 267
No. 268
No. 269T. 24 N., R. 34 E.
No. 270
No. 271
T. 18 N., R. 39 E. No. 272
T. 16 N., R. 23 E. No. 273
No. 274
T. 1 N., R. 57 E.
No. 275
T. 10 N., R. 29 E.
No. 276
No. 277T. 14 N., R. 27 E.
No. 278T. 10% N., R. 31 E.
FEDERAL REGISTER, V O L 31, NO. 93— FRIDAY, MAY 13, 1966
NOTICES 7089
No. 279T. 8 N., R. 23 E. T. 7 N., R. 26 E.T. 7 N., R. 24 E. T. 8 N., R. 24 E.
T. 8 N., R. 26 B.
No. 280T. 9N..R . 24 E. T. 9 N., R. 26 E.T. 10 N., R. 24 E. T. 9 N., R. 25 E.
T. 10 N., R.27E.
No. 281T. 23 N., R. 18 E. T. 23 N., R. 20 E.
NO. 282T. 27 N., R. 35 E. T. 27 N., R. 36 E.
T. 28 N., R. 36 E.
No. 283T. 26 N., R. 35 E. T. 26 N., R. 36 E.
T. 26 N., R. 37 E.
No. 284
T. 27 N., R. 38 E. T. 27 N., R. 39 E.
No. 285T. 29 N., R. 37 E. T. 29 N., R. 38 E.T. 30 N., R. 87 E. T. 30 N., R. 39 E.
No. 286T. 27 N., R. 42 E. T. 28 N., R. 43 E.T. 28 N., R. 42 E. T. 27 N., R. 43 E.
T. 28 N., R. 44 E.
No. 287T. 29 N., R. 41 E. T. 29 N., R. 42 E.
T. 30 N., R. 42 E.
No. 288T. 26 N., R. 41 E. T. 26 N., R. 42 E.
No. 289T. 43 N., R. 20 E. T. 44 N., R. 20 E.
No. 290T. 44 N., R. 44 E T. 45 N., R. 44 E.
No. 291T. 46 N., R. 44 E. T. 47 N., R. 44 E.
No. 292T. 32 N., R. 17 E. T. 32 y2 N., R. 18 E.T. 32 y2 N., R. 17 E. T. 32 N., R. 19 E.T. 31 N., R. 18 E. T. 32 N., R. 18 E.
T. 33 N., R. 18 E.
T. 32 N., R. 20 E.
No. 293
No. 294T. 33i/2 n ., R. 18 E. T. 34 N., R. 18i/2 E.T. 34 N., R. 18 E. T. 35 N., R. 19 E.
No. 295T. 40 N., R. 20 E. T. 40 N., R. 22 E.
T. 40y2 N., R. 22 E.
No. 296T. 31 N., R. 21 E. T. 311y2 N., R. 22 E.T. 32 N„ R. 21 E. T. 31 N., R. 22y2 E.T. 31 N., R. 22 E. T. 32 N., R. 22 E.
T. 31 N., R. 23 E.
No. 297T. 29 N., R. 23 E. T. 29 N., R. 24 E.T. 30 N., R. 23 E. T. 30 N., R. 24 E.T. 30y2 N., R. 23 E. T. 29 N., R. 25 E.T. 30 N., R. 23V2 E. T. 30 N„ R. 25 E.T. 301/2 N., R. 2314 E.
No. 298T. 29 N., R. 19 E. T. 29 N., R. 20 E.T. 30 N„ R. 19 E.
T. 31 N., R. 20 E.
T. 30 N., R. 20 E. No. 299
No. 300T. 45 N., R. 25 E. T. 44 N., R. 26 E.T. 451/2 N., R. 25 E. T. 45 N., R. 26 E.
No. 301T. 31 N., R.24E. T. 32 N.. R. 24 E.
No. 302T. 46 N., R. 23i/a E. T. 47 N., R. 24 E.T. 47 N., R. 231/2 E. T. 46 N., R. 25 E.T. 46 N., R. 24 E. T. 47 N., R. 25 E.
No. 303T. 46 N., R. 26 E. T. 47 N., R. 27 E.T. 47 N., R. 26 E. T. 47 N., R. 28 K 'T.46N., R. 27 E.
No. 304T. 45 N., R. 52 E.
No. 305T. 20 N., R. 61 E. T. 20 N., R. 63 E.T. 20 N., R. 62 E.
No. 306T. 21 N., R, 63 E. T. 21 N., R. 64 E.T. 22 N., R. 63 E.
No. 307T. 31 N.( R. 33 E. T. 31 N., R. 33% E.T. 31% N., R. 33 E.
Copies of these diagrams are for sale at one dollar ($1.00) each by the Nevada Land Office, Bureau of Land Management, Post Office Box No. 1551, Reno, Nev.
Robert T. W ebb, Acting Land Office Manager.
[F.R. Doc. 66-5163; Filed, May 12, 1966; 8:45 a.m.]
National Park ServiceFIRE ISLAND NATIONAL SEASHORE,
WILLIAM FLOYD ESTATE, NEW YORK
Notice of Filing of MapNotice is hereby given that, in accord
ance with the requirements of section 1 of the Act of October 9, 1965 (79 Stat. 967), the boundary map identified as “Map of the Fire Island National Seashore, Including the William Floyd Estate,” numbered OGP-0003, and dated May 1965, has been filed with the Office of the Federal Register. Such map is also on file and available for inspection in the Office of the Director, National Park Service, Washington, D.C.
Dated: May 5, 1966.A. Clark Stratton,
Acting Director, National Park Service.
[F.R. Doc. 66-5220; Filed, May 12, 1966; 8:47 a.m.J
DEPARTMENT OF AGRICULTUREConsumer and Marketing ServiceFARMERS AUCTION CO., ET AL.
Deposting of StockyardsIt has been ascertained, and notice is
hereby given, that the livestock markets named herein, orginally posted on the respective dates specified below as being subject to the Packers and Stockyards Aqt, 1921, as amended (7 U.S.C. 181 et seq.), no longer come within the definition o f a stockyard under said Act and
are, therefore no longer subject to the provisions of the Act.Name, location of stockyard, and date of
postingFarmers Auction Company, Marianna, Ark.,
Feb. 23, 1959.Fresno County Farm Bureau Sales Yard,
Fresno, Calif., Oct. 6,1959.Cherokee Livestock Sales Company, Cherokee,
Iowa, Feb. 25,1941.Hartsville Livestock Company, Hartsville,
Tenn., May 11,1959.Janesville Sale Barn, Inc., Janesville, Wis.,
May 27,1959.
Notice or other public procedure has not preceded promulgation of the foregoing rule since it is found that the giving o f such notice would prevent the due and timely administration of the Packers and Stockyards Act and would, therefore, be impracticable and contrary to the public interest. There is no legal warrant or justification for not deposting promptly a stockyard which is no longer within the definition of that term contained in the Act.
The foregoing is in the nature of a rule granting an exemption or relieving a restriction and, therefore, may be made effective in less than 30 days after publication in the Federal Register. This notice shall become effective upon publication in the Federal Register.(42 Stat. 159, as amended and supplemented; 7Ü.S.C. 181 et seq.)
Done at Washington, D.C., this 6th day of May 1966.
Charles G. Cleveland, Chief, Registrations, Bonds, and
Reports Branch, Packers and Stockyards Division, Consumer and Marketing Service.
[F.R. Doc. 66-5256; Filed, May 12, 1966; 8:50 a.m.]
DEPARTMENT OF COMMERCEOffice of the Secretary
ASSISTANT SECRETARY OF COMMERCE FOR ADMINISTRATION
Delegation of Authority Relating to Certifications
1. Pursuant to this authority delegated to the Assistant Secretary of Commerce for Administration by Department Order 166, the following officials of the Environmental Science Services Administration are hereby authorized to sign as certifying officers certifications as to the official nature of copies of correspondence and records from the files, publications and other documents of the Department and to affix the seal of the Department of Commerce to such certifications or documents for all purposes, including the purposes authorized by 28 U.S.C. 1733(b). Director, Executive and Technical Serv
ices Staff, Coast and Geodetic Survey. Director, Environmental Data Service. Director, National Weather Records Cen
ter, Environmental Data Service.
FEDERAL REGISTER, VOL. 31, NO. 93— FRIDAY, MAY 13, 1966
7090 NOTICESDirector, Executive and Technical Serv
ices Staff, Weather Bureau.2. Delegations of authority to officials
of the Weather Bureau and Coast and Geodetic Survey, dated November 16, 1966 (30 F.R. 14692 of November 25, 1965), are hereby revoked.
3. This delegation of authority shall be effective as of the date hereof.
Dated: May 6, 1966.David R. Baldwin, Assistant Secretary
for Administration.[F.R. Doc. 66-5206; Filed, May 12, 1966;
8:45 a.m.]
ATOMIC ENERGY COMMISSIONAGREEM EN T BETWEEN ATOM IC
ENERGY COMMISSION AND STATE OF NEW HAMPSHIRE
Discontinuance of Certain Commission Regulatory Authority and Responsibility Within the StateNotice is hereby given that the Chair
man of the Atomic Energy Commission and-the Governor and Executive Council of the State of New Hampshire have signed the Agreement below for discontinuance of certain Commission regulatory authority. The Agreement is published in accordance with the requirements of Public Law 86-373 (sec. 274 of the Atomic Energy Act of 1954, as amended). The exemptions from the licensing requirements of Chapters 6, 7, and 8 of the Atomic Energy Act are contained in Part 150 of the Commission’s regulations (10 CFRPart 150) in Federal Register issuances of February 14, 1962, 27 F.R. 1351; April 3, 1965, 30 F.R. 4352 and September 22,1965, 30 F.R. 12069.
Dated at Washington, D.C., this 6th day of May 1966.
For the Atomic Energy Commission.W. B. M cCool,
Secretary.
A greement Between the U.S. Atomic Energy Commission and the State of N ew Hampshire for D iscontinuance of Certain Commission Regulatory Authority and Responsibility W ithin the State Pursuant to Section 274 of the Atomic Energy A ct of 1954, as A mended
Whereas, the U.S. Atomic Energy Commission (hereinafter referred to as the Commission) is authorized under section 274 of the Atomic Energy Act of 1954, as amended (hereinafter referred to as the Act) to enter into agreements with the Governor of any State providing for discontinuance of the regulatory authority of the Commission within the State under Chapters 6, 7, and 8 and section 161 of the Act with respect to byproduct materials, source materials, and special nuclear materials in quantities not sufficient to form a critical mass; and
Whereas, the Governor arid Council of the State of New Hampshire is author
ized under Chapter 229, New Hampshire Laws of 1963, to enter into this Agreement with the Commission; and
Whereas, the Governor of the State of New Hampshire certified on January 13, 1966, that the State of New Hampshire (hereinafter referred to as the State) has a program for the control of radiation hazards adequate to protect the public health and safety with respect to the materials within the State covered by this Agreement, and that the State desires to assume regulatory responsibility for such materials; and
Whereas, the Commission found on April 18, 1966, that the program of the State for the regulation of the materials covered by this Agreement is compatible with the Commission’s program for the regulation of such materials and is adequate to protect the public health and safety; and
Whereas, the State and the Commission recognize the desirability and importance of cooperation between the Commission and the State in the formulation of standards for protection against hazards of radiation and in assuring that State and Commission programs for protection against hazards of radiation will be coordinated and compatible ;-and
Whereas, the Commission and the State recognize the desirability of reciprocal recognition of licenses and exemption from licensing of those materials subject to this Agreement; and
Whereas, this Agreement is entered into pursuant to the provisions of the Atomic Energy Act of 1954, as amended;
Now, therefore, it is hereby agreed between the Commission and the Governor of the State, acting in behalf of the State, as follows;
Article I. Subject to the exceptions provided in Articles n , III, and IV, the Commission shall discontinue, as of the effective date of this Agreement, the regulatory authority of the Commission in the State under Chapters 6, 7, and 8, and section 161 of the Act with respect to the following materials:
A. Byproduct materials;B. Source materials; andC. Special nuclear materials in quan
tities not sufficient to form a critical mass.
Art. II. This Agreement does not provide for discontinuance of any authority and the Commission shall retain authority and responsibility with respect to regulation of:
A. The construction and operation of any production or utilization facility;
B. The export from or import into the United States of byproduct, source, or special nuclear material, or of any production or utilization facility;
C. The disposal into the ocean or sea of byproduct, source, or special nuclear waste materials as defined in regulations or orders of the Commission;
D. The disposal of such other byproduct, source, or special nuclear material as the Commission from time to time determines by regulation or order should, because of the hazards or potential hazards thereof, not be so disposed of without a license from the Commission.
A rt . III. Notwithstanding this Agreement, the Commission may from time to time by rule, regulation, or order, require that the manufacturer, processor, or producer of any equipment, device, commodity, or other product containing source, byproduct, or special nuclear material shall not transfer possession or control o f such product except pursuant to a license or an exemption from licensing issued by the Commission.
Art. IV. This Agreement shall not affect the authority of the Commission under subsection 161 b. or i. of the Act to issue rules, regulations, or orders to protect the common defense and security, to protect restricted data or to guard against the loss or diversion of special nuclear material.
Art. V. The Commission will use its best efforts to cooperate with the State and other agreement States in the formulation of standards and regulatory programs of the State and the Commission for protection against hazards of radiation and to assure that State and Commission programs for protection against hazards of radiation will be coordinated and compatible. The State will use its best efforts to cooperate with the Comriiission and other agreement States in the formulation of standards and regulatory programs of the State and the Commission for protection against hazards of radiation and to assure that the State’s program will continue to be compatible with the program of the Commission for the regulation of like materials. The State and the Commission will use their best efforts to keep each other informed of proposed changes in their respective rules and regulations and licensing, inspection, and enforcement policies and criteria, and to obtain the comments and assistance of the other party thereon.
Art. VI. The Commission and the State agree that it is desirable to provide for reciprocal recognition of licenses for the materials listed in Article I licensed by the other party or by any agreement State. Accordingly, the Commission and the State agree to use their best efforts to develop appropriate rules, regulations, and procedures by which such reciprocity will be accorded.
Art. VH. The Commission, upon its own initiative after reasonable notice and opportunity for hearing to the State, or upon request of the Governor of the State, may terminate or suspend this Agreement and reassert the licensing and regulatory authority vested in it under the Act if the Commission finds that such termination or suspension is required to protect the public health and safety.
Art. VHI. This Agreement shall become effective on May 16,1966, and shall remain in effect unless, and until such time as it is terminated pursuant to Article VII.
Done at Washington, D.C., in triplicate, this 18th day of April 1966.
For the United States Atomic Energy Commission.
[ seal ] G l e n n T. Seaborg,Chairman.
FEDERAL REGISTER, V O L 31, NO. 93— FRIDAY, MAY 13, 1966
NOTICES 7091
Done at Concord, State of New Hampshire, in triplicate, this 29th day of April 1966.
For the State of New Hampshire.John W. K ing ,
Governor.W illiam A. Styles, Austin F. Quinne y , Emile Simard,Robert L. M allat, Jr., James H. H ayes,
Executive Council.[F.R. Doc. 66-5204; Filed, May 12, 1966;
8:45 am .]
[Docket No. PRM—30—23 ]
CANRAD PRECISION INDUSTRIES, INC.
Notice of Filing of Petition for Rule Making
Please take notice that Canrad Precision Industries, Inc., 630 Fifth Avenue, New York, N.Y., by letter dated April 21, 1966, has filed with the Commission a petition for rule making to amend the Commission’s regulation, “Rules of General Applicability to Licensing of Byproduct Material,” 10 CFR 30.
The amendment proposed by the petitioner would amend Part 30 so as to exempt from the licensing requirements of Section 81 of the Atomic Energy Act of 1954, as amended, and of Part 30, luminous-level-vials, each vial containing a maximum of 300 millicuries of tritium gas.
The petitioner states that its tritium- activated-level-vial-system is of two types:
(1) Internal double sealed system. A glass enclosed tritium light source is sealed inside a level vial.
(2) External single or double sealed system. A glass enclosed tritium light source is sealed with an appropriate adhesive on the outside of a level vial.
A copy of the petition for rule making is available for public inspection in the Commission’s Public Document Room at 1717 H Street NW , Washington, D.C.
Dated at Washington, D.C., this 6th day of May, 1966.
For the Atomic Energy Commission.W. B. M cCool,
Secretary.[F.R. Doc. 66-5205; Filed, May 12, 1966;
8:45 a.m.]
[Docket No. 27-43]
ATCOR, INC.Notice of Proposed Issuance of By
product, Source, and Special Nuclear Material LicensePlease take notice that the Atomic
Energy Commission is considering the issuance of a license, set forth below, which would authorize Atcor, Inc., 360 Bradhurst Avenue, Hawthorne, N.Y., to [receive packaged waste byproduct, source, and special nuclear material at customers’ facilities and to transport
such packages in any State of the United States except in Agreement States as defined in § 150.3(b), 10 CFR Part 150.
Within fifteen (15) days from the date of publication of this notice in the Federal Register, any person whose interest may be affected by this proceeding may file a petition for leave to intervene. Requests for a hearing and petitions to intervene shall be filed in accordance with the Commission’s regulations (10 CFR Part 2). I f a request for a hearing or a petition for leave to intervene is filed within the time prescribed in this notice, the Commission will issue a notice of hearing or an appropriate order.
For further details with respect to this proceeding see: (1) The application and amendments thereto and (2) the related memorandum prepared by the Division of Materials Licensing, all of Which are available for public inspection at the Commission’s Public Document Room, 1717 H Street NW., Washington, D.C.
A copy of Item 2 above may be obtained at the Commission’s Public Document Room, or upon request to the Atomic Energy Commission, Washington, D.C., 20545, Attention: Director of Materials Licensing.
Dated at Bethesda, Md., May 9, 1966.For the Atomic Energy Commission.
J. A. M cBride,Director,
Division of Materials Licensing.[License No. 31-11640-1]
The Atomic Energy Commission having found that:
A. The licensee’s equipment and procedures are adequate to protect health and minimize danger to life or property.
B. The licensee is qualified by training and experience to use the material for the purpose requested in accordance with the regulations in Title 10, Code of Federal Regulations, and in such manner as to protect health and minimize danger to life or property.
2. Byproduct, source, and special nuclear material shall be received, handled, and transported by employees designated by the licensee’s Radiological Safety Committee.
3. The licensee shall receive byproduct, source, and special nuclear material in containers which meet the requirements for transportation as specified in Condition 4. of this license. The containers shall not be opened by the licensee.
4. The transportation of AEC licensed material shall be subject to the applicable regulations of the Interstate Commerce Commission, U.S. Coast Guard, and other agencies of the United States having appropriate jurisdiction, and where such regulations are not applicable shall be in accordance with the following requirements except as specifically provided by the Atomic Energy Commission:
A. Outside Shipping Containers.(1) The containers shall meet any one of
the following specifications described in Appendix A attached hereto:
a. 15A, 15B, 12B, 6A, 6B, 6C, 17C, 17H, 19A, or 19B for the containment of radioactivity in amounts not in excess of 2.7 curies; except polonium, 2 curies; or
b. Specification 55 for containment of solid cobalt 60, cesium 137, iridium 192, or
C. The application dated February 9, 1966, and amendments thereto dated March 7, 1966, and April 5, 1966, comply with the requirements of the Atomic Energy Act of 1954, as amended, and is for a purpose authorized by that Act.
D. Issuance of the license will not be inimical to the common defense and security or to the health and safety of the public.
Byproduct, Source, and Special Nuclear Material License No.^ 31-11640-1 is hereby issued to read as follows:
Pursuant to the Atomic Energy Act of 1954, as amended, 10 CFR 30, “Rules of General Applicability to Licensing of Byproduct Material,” 10 CFR 40, “Licensing of Source Material,” 10 CFR 70, "Special Nuclear Material,” and reliance upon the statements and representations contained in the application dated February 9, 1966, and amendments thereto dated March 7, 1966, and April 5, 1966, a license is hereby issued to Atcor, Inc., 360 Bradhurst Avenue, Hawthorne, N.Y., to receive and possess packages containing waste byproduct, source, and special nuclear material at customers’ facilities in any State of the United States except in “Agreement States” as defined in section 150.3(b), 10 CFR 150, and to possess and transport packages containing waste byproduct, source, and special nuclear material in any State of the Uhjteci states except in “Agreement States.”
This license shall be deemed to contain the conditions specified in section 183 of the Atomic Energy Act of 1954, as amended, and is subject to the provisions of 10 CFR 20, “Standards for Protection Against Radiation,” all other applicable rules, regulations, orders of the Atomic Energy Commission now or hereafter in effect, and to the following conditions:
1. The licensee shall not possess at any one time more than:
A. 1,000 curies of byproduct material other than Hydrogen 3 and Carbon 14.
B. 5,000 curies each of Hydrogen 3 and Carbon 14.
C. 50,000 pounds of source material.D. 350 grams of Uranium 235 or 200
grams of Uranium 233 or 200 grams of P lu tonium provided that the sum of the ratios of the quantity of each special nuclear material to the quantities specified above does not exceed unity. Unity shall be determined by the following formula:
gold 198 in amounts not in excess of 300 curies.
(2) There shall be no radioactive contamination on any exterior surface of the container in excess of 500 d/m/100 sq. cm. alpha and 0.1 mrep/hr beta-gamma radiation.
(3) The smallest dimension of the container shall not be less than 4 inches.
(4) The radiation level at any accessible surface of the container shall not exceed 200 mrem/hr.
(5) At one meter from any point on the radioactive source the radiation level shall not exceed 10 mrem/hr.
(6) Containers which contain radioactive material emitting only alpha and/or beta radiation shall contain sufficient shielding to prevent the escape of primary corpuscular radiation to the exterior surface and to reduce the secondary radiation at the surface of the container so that it does not exceed 10 mrem/24 hours at any time during transportation.
B . Inside Containers.(1) Solid and gaseous radioactive ma
terials shall be packed in suitable inside containers designed to prevent rupture and leakage under conditions incident to transportation.
grams contained U235 ( grams contained in U 233 , grams contained Pu ,1 --------- SKK------------------ 1---------------------------------- = 1350 200 200
FEDERAL REGISTER, VOL. 31, NO. 93— FRIDAY, MAY 13, 1966
7092
(2) Liquid radioactive materials must be packed in sealed glass, earthenware, or other suitable containers. The container must be surrounded on all sides by an absorbent material sufficient to absorb the entire liquid contents and be of such nature that its efficiency will not be impaired by chemical reactions with the contents. Where shielding is required the absorbent material must be placed within the shield. If the inside container meets the Specification 2R in Appendix A the absorbent material is not required.
(3) Materials containing radioisotopes of plutonium, americium, polonium, or curium or the isotope strontium 90, in quantities in excess of 100 microcuries, must be packed in containers which meet Specification 2R in Appendix A.
C. Shielding.Inside containers must be completely sur
rounded with sufficient shielding to meet the requirements of subparagraphs A (4 ), A (5 ), and A (6) of this condition. The shield must be so designed that it will not open or break under normal conditions incident to transportation.
D. Labeling.Each outside container label required
under section 20.203(f) of 10 CFR 20 shall bear the following information:
(1) Total activity in millicuries, or in the case of source and special nuclear material, the total weight;
(2) Principal radioisotope;(3) Radiation level at the surface of the
container and at 1 meter from the source; and
(4) The name and address of the licensee.E. Each vehicle in which licensed material
is transported shall be marked or placarded on each side and the rear with lettering at least 3 inches high as follows: “DANGEROUS-RADIOACTIVE MATERIAL.”
P. Accidents.In the event of an accident involving any
vehicle transporting licensed material, immediate steps shall be taken to prevent radiation exposure of persons and to control contamination.
G. Exemptions.Specific approval must be obtained from
the Atomic Energy Commission for modification of, or exemption from, the requirements of the license condition. Requests for such approval should be directed to the Chief, Isotopes Branch, Division of Materials Licensing, Atomic Energy Commission, and should contain sufficient information to support such a request.
6. The licensee shall not store byproduct, source, and special nuclear material in any of the States in which the licensee is authorized to receive, possess, and transport such material under the terms of this license.
6. Except as specifically provided otherwise by this license, the licensee shall receive, possess, and transport byproduct, source, and special nuclear material in accordance with the procedures and limitations contained in the application dated February 9, 1966, and amendments thereto dated March 7, 1966, and April 5, 1966.
This license shall be effective on the date issued and shall expire two (2) years from the last day of the month in which this license is issued.
Date of issuance :For the Atomic Energy Commission.
Director,Division of Materials Licensing.
[F.R. Doc. 66-5243; Filed, May 12, 1966; 8:49 a.m.]
NOTICES
CIVIL AERONAUTICS BOARD[Docket No, 15419 etc.; Order No. E-23653]
FLYING TIGER LINE, INC.Proposed Blocked-Space Tariff
RevisionsAdopted by the Civil Aeronautics
Board at its Office in Washington, D.C., on the 9th day of May 1966; blocked- space tariff revisions proposed by The Plying Tiger Line, Inc., Dockets 15419, 17235, 17236, 17241, 17252.
By tariff revisions1 bearing the posting date of April 4, 1966, and marked to become effective May 19, 1966, The Flying Tiger Line, Inc. (Plying Tiger), proposes several changes in its effective blocked-space tariff. The significant revision, and that to which the complaints are directed, proposes to cancel the requirement that shippers in effect specify the days of the week on which space is contracted, and establish in place thereof blocked-space agreements which would permit the shipper to specify the number of shipments to be tendered during the course of each week without reference to any particular day of the week. Trans World Airlines, Inc. (Trans W orld), has filed a similar tariff,2 also marked to become effective May 19, 1966.
Complaints requesting investigation and suspension of Plying Tiger’s tariff have been filed by American Airlines, Inc. (American), Trans World Airlines, Inc. (Trans W orld), and United Air Lines, Inc. (United). In addition, United requests that the tariff be rejected because of Plying Tiger’s absence of justification in the tariff transmittal and failure to comply with § 221.165 of the Board’s economic regulations.
The complaints assert, essentially, that (1) the proposed service is not jjlocked- space within the meaning of § 399.37 of the Board’s Policy Statements, because no space could be reserved for blocked- space traffic either on a regular recurring basis or otherwise since the shipper would not be required to tender the traffic at any particular time; (2) the proposal would destroy the principal economic justification for reduced blocked-space rates since the carrier would not be able to plan its traffic requirements with any degree of precision; (3) the proposal is in substance a form of aggregate rate tariff, since eligibility for the reduced blocked-space rate would be based on the total amount of traffic guaranteed over a 7-day period; and (4) the proposal would result in substantial additional diversion from the combination carriers. In addition, Trans World asserts that if the Board permits these “contract rates” to become effective, all carriers must be allowed to compete on an equal basis.
1 To The Flying Tiger Line, Inc., Official Blocked-Space Airfreight Tariff No. 1, C.A.B. No. 170.
2 Trans World Airlines, Inc., Official Contract Rate Airfreight Tariff No. 1, C.A.B. No. 163.
Accordingly, that barrier has filed a tariff similar to Plying Tiger’s proposal.
In its answer to the complaints, Plying Tiger states that (1) its proposal satisfies the definition of blocked-space in § 399.37 because the shipper would be required to reserve and pay for a specified amount of lift weekly, for a period of at least 90 days, which is on a regularly recurring basis; (2) while the instant proposal may not be as advantageous to the carrier as a more rigid contract, the effective tariff is not sufficiently flexible for shippers, and the ability to plan the overall volume of lift on a route for even a 7-day period is helpful to Plying Tiger and reduces costs; and (3) the proposal is not an unlawful “ aggregate rate” because (a) the blocked-space rates must be paid whether the shipment, or its full volume, is made or not, (b) blocked-space shipments must be on a regularly recurring basis for a period of at least 90 days, (c) blocked-space rates are those applicable at the weight break agreed upon even though more traffic is tendered whereas aggregate rates would take the weight break rate applying to the aggregate shipment; and (d) the blocked- space agreement shifts a risk from the carrier to the shipper and, in return for undertaking the risk, the shipper obtains a special rate.
Flying Tiger has filed a complaint requesting rejection of Trans World’s similar tariff on the grounds that § 399.37(c) of the Board’s Policy Statements (14 CFR Part 399), prohibits combination carriers from providing blocked-space service.
The Board has determined to permit Plying Tiger’s revisions to become effective, and to reject Trans World’s tariff. We do not consider that this modification destroys the basic blocked-space concept, since the shipper would commit himself to tender shipments on a regularly recurring basis for at least 90 days. However, the relaxation of the tender requirement to permit the shipper to make shipments at any time during the course of a 7-day period, may affect the economic bases of these rates. The effective tariff is now under investigation in Docket 15419, and by the terms of Order E-21759, February 4, 1965, the instant revisions are automatically placed under investigation in that docket. The proposal will not be suspended pending investigation in order to give Flying Tiger opportunity to gain experience under its proposed revisions.
The Board has concluded to reject TW A’s “ contract rate” tariff as a blocked-space proposal not in accordance with the published Blocked-Space Policy (§ 399.37 of the Board’s Policy Statements) or the provisions of section 403 of the Federal Aviation Act of 1958. Under that regulation, the combination passenger-cargo Carriers are not permitted to offer blocked-space service. Pursuant to that regulation and the foregoing statutory provision, the Board has consistently rejected blocked-space tariffs proposed by combination carriers.3
3 See e.g., Orders E-21170, E-21575, and E—21820.
FEDERAL REGISTER, VOL. 31, NO. 93—-FRIDAY, MAY 13, 1966
NOTICES 7093
Consistent with that conclusion, Trans World’s proposal will be rejected.
Accordingly, pursuant to the Federal Aviation Act of 1958, and particularly sections 102, 204(a), 403, and 1002 thereof,
I t is ordered, That:1. Trans World Airlines, Inc., C.A.B.
No. 163 is hereby rejected.2. The complaints of American Air
lines, Inc., in Docket 17235, Trans World Airlines, Inc., in Docket 17236, United Air Lines, Inc., in Docket 17241, and The Flying Tiger Line, Inc., in Docket 17252, are dismissed, except to the extent granted herein.
3. A copy of this order shall be served upon all parties in Docket 15419 and filed with Trans World Airlines, Inc., C.A.B. No. 163.
This order will be published in'the F ed eral R egister v
By the Civil Aeronautics Board.*[ seal ] H arold R. S anderson ,
Secretary.[F.R. Doc. 66-5250; Filed, May 12, 1966;
8:49 a.m.]
FEDERAL COMMUNICATIONS COMMISSION
[Docket Nos. 16487,16488; FCC 66M-655]
HENNEPIN BROADCASTING ASSOCIATES, INC., AND WMIN, INC.
Order Regarding Procedural DatesIn re applications of Hennepin Broad
casting Associates, Inc., St. Paul, Minn., Docket No. 1648T, File No. BPH-4369; WMIN, Inc., St. Paul, Minn., Docket No. 16488, File No. BPH-4869; for construction permits.
The Hearing Examiner having under consideration a petition filed May 5,1966, by WMIN, Inc., requesting an extension of procedural dates, including the pre- hearing conference now scheduled to be held on May 9,1966, pending action upon a joint request filed before the Review Board on May 4, 1966, for approval of agreement for withdrawal of application of Hennepin Broadcasting Associates, Inc., grant of the WMIN, Inc., application and termination of the instant proceeding: and
It appearing that counsel for Hennepin Broadcasting Associates, Inc., and Chief, Broadcast Bureau have no objection to the immediate favorable consideration of the petition, and good cause for granting the same having been shown;
f t is ordered, This the 6th day of May 1966, that the petition for extension of procedural dates is granted, and the further prehearing conference now scheduled for May 9, 1966, and all other pro-
* Dissenting statement of Member G illll- land filed as part of original document.
cedural dates are continued to a date to be specified after the Review Board has acted upon the above joint request.
Released: May 9, 1966.F ederal C o m m u n ic a t io n s
C o m m is s io n ,[ seal ] B e n F . W aple ,
Secretary.[ P A Doc. 66-5259; Filed, May 12, 1966;
8:50 a.m.]
[Docket Nos. 16489,16490; FCC 66M-660]
McAlister b r o a d c a s t in g c o r p .AND KJJJ-TV
Order Continuing Prehearing Conference
In re applications of McAlister Broadcasting Corp., Lubbock, Tex., Docket No. 16489, File No. BPCT-3426; John B. Walton, Jr., doing business as KJJJ-TV, Lubbock, Tex., Docket No. 16490, File No. BPCT-3527; for construction permit for new television broadcast station Channel 28.
Upon oral request of counsel representing John B. Walton, Jr., doing business as KJJJ-TV; with the consent of all the other parties to this proceeding; and good cause having been shown therefor: I t Xs ordered, This 9th day of May 1966, that the further prehearing conference presently scheduled for May 10,1966, be, and the same is, hereby continued to June 7,1966.
Released: May 10, 1966.F ederal C o m m u n ic a t io n s
C o m m is s io n , .[ se al ] B e n F . W aple ,
Secretary.[F.R. Doc. 66-5260; Filed, May 12, 1966;
8:50 ajn .]
[Docket Nos. 16625-16628; FCC66M-662]
NORTHWESTERN INDIANA BROADCASTING CORP. ET AL.
Order Scheduling HearingIn re applications of Northwestern
Indiana Broadcasting Corp., Valparaiso, Ind., Docket No. 16625, File No. BPH- 4110; William H. Wardle, Robert A. Jones, and F. Patrick Nugent, doing business as Valparaiso Broadcasting Co., Valparaiso, Ind., Docket No. 16626, File No. BPH-4147; Porter County Broadcasting Corp., Valparaiso, Ind., Docket No. 16627, File No. BPH-4972; Northwestern Indiana Radio Co., Inc., Valparaiso, Ind., Docket No. 16628, File No. BPH-5045; for construction permits.
I t is ordered. This 9th day of May 1966, that H. Gifford Irion shall serve as Presiding Officer in the above-entitled proceeding; that the hearings therein shall be convened on July 13, 1966, at 10 a.m.; and that a prehearing conference shall be held on June 6, 1966, commencing at 9 a.m.: And it is further ordered, That all proceedings shall be
held in the offices of the Commission, Washington, D.C.
Released: May 10, 1966.F ederal C o m m u n ic a t io n s
Co m m is s io n ,[ seal ] B e n F . W a ple ,
Secretary.[F.R. Doc. 66-5261; Filed, May 12, 1966;
8:50 a.m.]
[Docket Nos. 16623,16624; FOC 66M-661)
WDIX, INC., AND RADIO ORANGEBURG, INC.
Order Scheduling HearingIn re applications of WDIX, Inc.,
Orangeburg, S.C., Docket No. 16623, File No. BPH-4554; Radio Orangeburg, Inc., Orangeburg, S.C., Docket No. 16624, File No. BPH-4642; for construction permits.
I t is ordered, This 9th day of May 1966, that Elizabeth C. Smith shall serve as Presiding Officer in the above-entitled proceeding; that the hearings therein shall be convened on July 14, 1966, at 10 a.m.; and that a prehearing conference shall be convened on June 7, 1966, commencing at 9 a.m.: And it is further ordered, That all proceedings shall be held in the offices of the Commission, Washington, D.C.
Released; May 10,1966.F ederal C o m m u n ic a t io n s
C o m m is s io n ,[ seal ] B e n F . W a ple ,
Secretary.[F.R. Doc. 66-5262; Filed, May 12, 1966;
8:50 ajn .]
[Docket No. 16043; FOC 66M-663)
SPORTS NETWORK, INC., AND AMERICAN TELEPHONE & TELEGRAPH CO.
Order Scheduling HearingSports Network, Inc., New York, N.Y.,
Complainant, vs. American Telephone & Telegraph Co., New York, N.Y., Defendant, Docket No. 16043.
I t is ordered, This 9th day of May 1966, that Herbert Sharfman shall serve as Presiding Officer in the above-entitled proceeding; that the hearings therein shall be convened on July 12, 1966, at 10 a.m.; and that a prehearing conference shall be held on June 16, 1966, commencing at 10 a.m.: And it is further ordered, That all proceedings shall be held in the offices of the Commission, Washington, D.C.
Released: May 10, 1966.
F ederal C o m m u n ic a t io n s C o m m is s io n ,
[ seal ] B e n F . W a ple ,Secretary.
[F.R. Doc. 66-5263; Filed, May 12, 1966; 8:51 a.m.]
FEDERAL REGISTER, VOL. 31, NO. 93— FRIDAY, MAY 13, 1966
7094 NOTJCES
FEDERAL MARITIME COMMISSIONHANSEATISCHE REEDEREI EMILOFFEN
& CO. AND VAASA LINE OYNotice of Agreement Filed for
ApprovalNotice is hereby given that the follow
ing agreement has been filed with the Commission for approval pursuant to section 15 of the Shipping Act, 1916, as amended (39 Stat. 733, 75 Stat. 763, 46 U.S.C. 614).
Interested parties may inspect and obtain a copy of the agreement at the Washington Office of the Federal Maritime Commission, 1321 H Street NW., Room 609; or may inspect agreements at the offices of the District Managers, New York, N.Y., New Orleans, La., and San Francisco, Calif. Comments with reference to an agreement including a request for hearing, if desired, may be submitted to the Secretary, Federal Maritime Commission, Washington, D.C., 20573, within 20 days after publication of this notice in the F ederal R egister. A copy of any such statement should also be forwarded to the party filing the agreement (as in
dicated hereinafter) and the comments should indicate that this has been done.Noticq^of Agreement Filed for Approval by: Mr. John P. Meade, Graham James &
Rolph, 1725 De Sales Street NW., Washington, D.C., 20036.Agreement 8178-3 between Hansea-
tische Reederei Emil Offen & Co., and Vaasa Line Oy, the carriers comprising the Hanseatic-Vaasa Line Joint Service operating in the inbound and outbound trades between Pacific coast and Hawaiian and European ports modifies the basic agreement to i l ) eliminate from the scope of their joint operations the outbound trade from Pacific coast and Hawaiian ports to Europe; (2) to eliminate Hawaii from the scope of their joint operations in the inbound trade; (3) to provide that in the trade from Europe to the Pacific coast, the parties will endeavor to schedule their vessels for their mutual benefit and the best interests of the trade served; (4) to eliminate the requirement that the common Owner’s representative of the joint service be located in the United States; and (5) to amend other provisions of the agreement to reflect the foregoing
changes in the scope of the joint service’s operations.
Dated: May 10,1966.By order of the Federal Maritime
Commission.T hom as L is i ,
Secretary.[F.R. Doc. 66-5237; Filed, May 12, 1966;
8:48 a.m.]
FEDERAL POWER COMMISSION[Docket No. RI66-368]
SUNSET INTERNATIONAL PETROLEUM CORP.
Order Accepting Rate Increase Filings, Providing for Hearing on and Suspension of Proposed Changes in Rates, and Allowing Rate Changes To Become Effective Subject to Refund
M a y 6, 1966.Sunset International Petroleum Corp.
(Sunset) 1 has tendered for filing proposed changes in its presently effective rate schedules for sales of natural gas subject to the jurisdiction of the Commission. The proposed changes, which constitute increased rates and charges, are designated as follows:
Docket Rate Supple- Amount Date Effective Cents Der Mcf Rate inRespondent Purchaser and producing area date Date effectNo. sched- ment of annual filing unless suspended subject toule No. No. increase tendered suspended until— Rate in Proposed in- refund in
effect creased rate docket Nos.
RI66-368... Sunset International 21 3 El Paso Natural Gas Co. (Huerfano $1,000 4-8-66 »5-9-66 »5-10-66 • 113.0 * » « 114. 0Petroleum Corp., 8920 Wilshire Blvd.,
Unit No. 106, San Juan County, N. Mex.) (San Juan Basin Area). *5-9-66 (Accepted) »11.0 » « « 12.0
Beverly Hills, Calif., 90211.
_„do 24 20 El Paso Natural Gas Co. (San Juan 82,000 4-8-66 »5-9-66 »5-10-66 •13.0 * » • 14.0and Rio Arriba Counties, N. Mex.) (San Juan Basin Area).
___ do____________ 27 7 El Paso Natural Gas Co. (Maddox 2,260 4-8-66 »5-9-66 »5-10-66 • 13.0 • « • 14. 0No. 1 Unit, San Juan County, N. Mex.).
28 i»3 El Paso Natural Gas Co. (Huerfano Unit-Pictured Cliffs Formation,
120 4-7-66 »5-8-66 (Accepted) 11.0 » « 12. 0San Juan County, N. Mex.) (San Juan Basin Area).
s The stated effective date is the effective date requested by Respondent.* The suspension period is limited to 1 day.* Periodic rate increase.» Pressure base Is 15.025 p.s.i.a.* Includes 1.0 cent per Mcf added to reflect minimum guarantee for liquids.* High pressure gas.* Low pressure gas. By letter agreement dated Feb. 9,1961 (Supplement No. 1),
buyer and seller agreed that the price for low pressure gas delivered into buyer’s
Sunset requests a retroactive effective date of March 1,1966, the date of refund payment for the proposed increased rate contained in Supplement No. 3 to Sunset’s FPC Gas Rate Schedule No. 28.Good cause has not been shown for waiving the 30-day notice requirement provided in section 4(d) of the Natural Gas Act to permit an earlier effective date for the increased rate contained in Supplement No. 3 to Sunset’s FPC Gas Rate Schedule No. 28 and such request is denied.
The proposed increased rates contained in Supplement No. 3 to Sunset’s FPC Gas Rate Schedule No. 21 are for high pressure and low pressure gas. The rate of 12.0 cents per Mcf for low pressure gas is below the 13.0 cents per, Mcf San Juan Basin area ceiling and is therefor accepted for filing and permitted to
250-pound gathering system would be reduced by 1.0 cent per Mcf and the 1.0 cent per Mcf minimum guarantee for liquids would not apply to such gas.
* The stated effective date is the ist day after expiration of the statutory notice.»»Includes letter from buyer dated Feb. 10,1966, and copy of Respondent’s check
to buyer dated Mar. 1, 1966, evidencing compliance to ordering paragraph (J) of Commission’s order issued Aug. 24,1964, in Docket No. G-3894, et al. Such order issued a permanent certificate to Sunac Petroleum Corp., Respondent’s predecessor, in Docket No. CI64-1423 and required refunds for amounts collected in excess of 10.0 cents from June 10,1969, to May 28,1964, before any rate increase could be filed.
antee for liquids. The addition of this minimum guarantee o f 1.0 cent to the base rate results in a rate in excess of the 13.0 cents per Mcf area ceiling for increased rates in the San Juan Basin Area. Sunset has advised that it is not willing to waive such minimum guarantee for liquids. Under the circumstances, Sunset’s proposed rate increases contained in these two supplements should be suspended for 1 day from May 9,1966, the proposed effective date.
Sunset’s proposed increased rate contained in Supplement No. 3 to its FPC Gas Rate Schedule No. 28 involves a sale which was succeeded to by Sunset’s predecessor, Sunac Petroleum Corp. (Sunac). At the time Sunac filed for a
* Address is: 8920 Wilshire Blvd., Beverly Hills, Calif., 90211.
become effective on May 9,1966, the proposed effective date. The increased rate of 14.0 cents per Mcf for high pressure gas contained in Supplement No. 3 to Sunset’s FPC Gas Rate Schedule No. 21 exceeds the area ceiling by 1.0 cents per Mcf minimum guarantee for liquids. Sunset has advised that it is not willing to waive such minimum guarantee. We believe, in this situation, Sunset’s proposed 14.0 cents per Mcf increased rate for high pressure gas contained in the aforementioned supplement should be suspended for 1 day from May 9, 1966, the proposed effective date.
The proposed rate increases contained in Supplement Nos. 20 and 7 to Sunset’s FPC Gas Rate Schedule Nos. 24 and 27, respectively, do not include as part of the proposed rates the contractually provided 1.0 cents per Mcf minimum guar
FEDERAL REGISTER, VOL. 31, NO. 93— FRIDAY, MAY 13, 1966
NOTICES 7095
and 15 thereof, the Commission’s rules of practice and procedure, and the regulations under the Natural Gas Act (18 CFR Ch. I ) , a public hearing shall be held upon a date to be fixed by notice from the Secretary concerning the lawfulness of the proposed increased rates and charges contained in Supplement Nos. 20 and 7 to Sunset’s FPC Gas Rate Schedule Nos. 24 and 27, respectively, and the 14,0 cents per Mcf rate for high pressure gas contained in Supplement No. 3 to Sunset’s FPC Gas Rate Schedule No. 21.
(D) Pending a hearing and decision thereon, Supplement Nos. 20 and 7 to Sunset’s FPC Gas Rate Schedule Nos. 24 and 27, respectively, and the 14.0 cents per Mcf rate for high pressure gas contained in Supplement No. 3 to Sunset’s FPC Gas Rate Schedule No. 21, are hereby suspended and the use thereof deferred until May 10, 1966, and thereafter until such further time as they are made effective in the manner prescribed by the Natural Gas Act: Provided, however, That the supplements to the rate schedules filed by Sunset (referred to in paragraph C above) shall become effective subject to refund on the date and in the manner herein prescribed if within 20 days from the date of the issuance of this order, Sunset shall execute and file under Docket No. RI66-368, with the Secretary of the Commission, its agreement and undertaking to comply with the refunding and reporting procedure required by the Natural Gas Act and § 154.102 of the regulations thereunder, accompanied by a certificate showing service of a copy thereof upon the purchaser, EH Paso Natural Gas Co. Unless Sunset is advised to the contrary within 15 days from the filing of its agreement and undertaking, such agreement and undertaking shall be deemed to have been accepted.
(E) Neither the supplements hereby suspended, nor the rate schedules sought to be altered thereby, shall be changed until this proceeding has been disposed of or until the periods of suspension have expired, unless otherwise ordered by the Commission.
(P ) Notices Of intervention or petitions to intervene may be filed with the Federal Power Commission, Washington, D.C., 20426, in accordance with the rules of practice and procedure (18 CFR 1.8 and 1.37(f)) on or before June 22, 1966.
By the Commission.
[ seal ] Jo seph H. G u tr id e ,Secretary.
[F.R. Doc. 66-5211; Filed, May 12, 1966;8:45 a.m.]
[Docket No. G-13183, etc.]
PLACID OIL CO., ET AL. Order Denying Motions; Correction
RP65-15; Transcontinental Gas Pipe Line Corp., Docket No. RP65-31; Consolidated Gas Supply Corp., Docket No. RP66-23.
In the order denying motions for escrow of refunds to stop interest, requiring reports of intended disposition and requiring retention of refunds, issued April 6, 1966, and published in the F ederal R egister April 13, 1966 (F.R. Doc. 66-3933, 31 F.R. 5719), insert the following after “United” in the third sentence of ordering paragraph (C ) : “ and any amount attributable to jurisdictional sales by Transco or United” .
Jo seph H. G u tr id e , Secretary.
[F.R. Doc. 66-5210; Filed, May 12, 1966;8:45 a.m.]
SECURITIES AND EXCHANGE COMMISSION
[File No. 70^4382]
MICHIGAN WISCONSIN PIPE LINE CO.Notice of Proposed Issue and Sale of
Notes to BanksM a y 9, 1966.
Notice is hereby given that Michigan Wisconsin Pipe Line Co. (“Michigan Wisconsin” ) , One Woodward Avenue, Detroit, Mich., 48226, a gas transmission subsidiary company of American Natural Gas Co., a registered holding company, has filed a declaration with this Commission pursuant to the Public Utility Holding Company Act of 1935 (“Act” ), designating sections 6 and 7 thereof as applicable to the proposed transactions. All interested persons are referred to the declaration, whifch is summarized below, for a complete statement of the proposed transactions.
Michigan Wisconsin proposes to issue and sell to the banks named below, from time to time commencing in June 1966, its unsecured promissory notes in an aggregate principal amount not to exceed $60 million. The proceeds of the notes will be used to pay, in part, the costs of Michigan Wisconsin’s 1966 construction program estimated at $90 million. The maximum amount of notes to be sold to each bank is as follows:First National City Bank, New
York, N .Y______________________ $20,000,000National Bank of Detroit, Mich__ 16,000, 000Manufacturers Hanover Trust
Co., New York, N .Y___________ 10,000,000The Detroit Bank & Trust Co.,
Detroit, Mich_________________ 5, 000, 000Manufacturers National Bank
of Detroit, Mich______________ 5, 000, 000First Wisconsin National Bank
of Milwaukee, W is__________ _ 3 , 000, 000Marine National Exchange Bank,
Milwaukee, Wis_______________ 1, 000, 000T o t a l____________ ________ 60,000,000
certificate authorizing the continuation of such sales, it was learned that such sale had been rendered without certificate authorization. The order issuing a certificate to Sunset’s predecessor, Sunac, under Docket No. CI64-1423, required Sunac to refund to the purchaser, El Paso Natural Gas Co. (El Paso) all unauthorized amounts collected in excess of the 10.0 cents initial rate from June 10, 1959, the date the sale commenced, to May 28, 1964, the date Sunac filed for certificate authorization. The order issuing certificate further provided that after the refund obligation had been satisfied, Sunac could file for any contractually due increased rate above the 11.0 cents per Mcf rate authorized in the certificate order. Such refund obligation has been met to the extent that a check for $730.42 has been mailed to El Paso. Since the required refunds have been made in compliance with the Commission’s aforementioned order, and the proposed increased rate is below the 13.0 cents per Mcf area ceiling, we conclude that Supplement No. 3 to Sunset’s FPC Gas Rate Schedule No. 28 should be accepted for filing and permitted to become effective on May 8, 1966, the date of expiration of the statutory notice.
The proposed changed rates and charges may be unjust, unreasonable, unduly discriminatory, or preferential, or otherwise unlawful.
The Commission finds:(1) Good cause has been shown that
the 12.0 cents per Mcf rate for low pressure gas contained in Supplement No. 3 to Sunset’s FPC Gas Rate Schedule No. 21 should be accepted for filing and permitted to become effective on May 9, 1966, the proposed effective date.
(2) Good cause has been shown that the 12.0 cents per Mcf rate contained in Supplement No. 3 to Sunset’s FPC Gas Rate Schedule No. 28 should be accepted for filing and permitted to become effective on May 8, 1966, the date of expiration of the statutory notice.
(3) It is necessary and proper in the public interest and to aid in the enforcement of the provisions of the Natural Gas Act that the Commission enter upon a hearing concerning the lawfulness of the proposed changes, and that Supplement No. 20 and 7 to Sunset’s FPC Gas Rate Schedule Nos. 24 and 27, respectively, and the 14.0 cents per Mcf rate for high pressure gas contained in Supplement No. 3 to Sunset’s FPC Gas Rate Schedule No. 21 be suspended and the use thereof deferred as hereinafter ordered.
The Commission orders:(A ) The 12.0 cents per Mcf for low
pressure gas contained in Supplement No. 3 to Sunset’s FPC Gas Rate Schedule No. 21 is accepted for filing and permitted to become effective on May 9, 1966, the proposed effective date.
(B) The 12.0 cents per Mcf rate contained in Supplement No. 3 to Sunset’s FPC Gas Rate Schedule No. 28 is accepted for filing and permitted to become effective on May 8, 1966, the date of expiration of the statutory notice.
(C) Pursuant to the authority of the Natural Gas Act, particularly sections 4
A p r il 27, 1966,Placid Oil Co., Docket No. G-13183,
et al.; Superior Oil Co., The, Docket No. G-16380, G-16388; Callery Properties, Inc., Docket No. G-17340, G-17341; United Gas Pipe Line Co., Docket No.
All notes will mature September 30, 1967, and may be prepaid at any time without penalty. Each note will bear interest at the prime rate (currently 5V2 percent per annum) in effect at First National City Bank, New York, N.Y., on
No. 93------ 11FEDERAL REGISTER, VOL. 31, NO. 93— FRIDAY, MAY 13, 1966
7096 NOTICESits issue date, subject to adjustment, however, to the prime rate in effect at the beginning of each 90-day period subsequent to the date on which the first note is issued.
Michigan Wisconsin will apply the net proceeds from any permanent debt financing effected prior to the maturity of the notes in reduction of, or in total payment of, the notes, and the aggregate principal amount of the notes authorized under this filing will be reduced by the amount of the net proceeds of the permanent debt financing.
Fees and expenses incident to the proposed transactions are estimated at $1,000, including legal fees of $500. The filing states that no State commission and no Federal commission, other than this Commission, has jurisdiction over the proposed transactions.
Notice is further given that any interested person may, not later than June 3, 1966, request in writing that a hearing be held on such matter, stating the nature of his interest, the reasons for such request, and the issues of fact or law raised by said declaration which he desires to controvert; or he may request that he be notified if the Commission should order a hearing thereon. Any such request should be addressed: Secretary, Securities and Exchange Commission, Washington, D.C., 20549. A copy of such request should be served personally or by mail (airmail if the person being served is located more than 500 miles from the point of mailing) upon the declarant at the above-stated address, and proof of service (by affidavit or, in case of an attorney at law, by certificate) should be filed contemporaneously with the request. At any time after said date,, the declaration, as filed or as it may be amended, may be permitted to become effective as provided in Rule 23 of the general rules and regulations promulgated under the Act or the Commission may grant exemption from such rules as provided in Rules 20(a) and 100 thereof or take such other action as it may deem appropriate.
For the Commission (pursuant to delegated authority).
[ seal ] O rval L . D u B o is ,Secretary.
[P.B. Doc. 66-5223; Piled, May 12, 1966;8:47 a.m.]
[File No. 7-25511
UNITED STATES STEEL CORP.Notice of Application for Unlisted
Trading Privileges and of Opportunity for Hearing
M a y 9,1966.In the matter of application of the
Boston Stock Exchange for unlisted trading privileges in a certain security, Securities Exchange Act of 1934.
The above-named national securities exchange has filed an application with the Securities and Exchange Commission pursuant to section 12(f) (1) (B) of the Securities Exchange Act of 1934 and Rule 12f-l thereunder, for unlisted trad
ing privileges in the common stock of the following company, which security is listed and registered on one or more other national securities exchanges :
United States Steel Corp., Pile 7-2551.
Upon receipt of a request, on or before May 25,1966, from any interested person, the Commission ,will determine whether the application shall be set down for hearing. Any such request should state briefly the nature of the interest of the person making the request and the position he proposes to take at the hearing, if ordered. In addition, any interested person may submit his views or any additional facts bearing on the said application by means of a letter addressed to the Secretary, Securities and Exchange Commission, Washington 25, D.C., not later than the date specified. I f no one requests a hearing, this application will be determined by order of the Commission on the basis of the facts stated therein and other information contained in the official files of the Commission pertaining thereto.
For the Commission (pursuant to delegated authority).
[ seal ! O rval L . D u B o is ,Secretary.
[F.R. Doc. 66-5224; Filed, May 12, 1966;8:47 a.m.]
[File No. 7-2552]
UNITED STATES STEEL CORP.Notice of Application for Unlisted
Trading Privileges and of Opportunity for Hearing
M a y 9, 1966.In the matter of application of the
Cincinnati Stock Exchange for unlisted trading privileges in a certain security, Securities Exchange Act of 1934.
The above-named national securities exchange has filed an application with the Securities and Exchange Commission pursuant to section 12(f) (1) (B) of the Securities Exchange Act of 1934 and Rule 12f-l thereunder, for unlisted trading privileges in the common stock of the following company, which security is listed and registered on one or more other national securities exchanges:United States Steel Corp., File 7-2552.
Upon receipt of a request, on or before May 25,1966, from any interested person the Commission will determine whether the application shall be set down for hearing. Any such request should state briefly the nature of the interest of the person making the request and the position he proposes to take at the hearing, if ordered. In addition, any interested person may submit his views or any additional facts bearing on the said application by means of a letter addressed to the Secretary, Securities and Exchange Commission, Washington 25, D.C., not later than the date specified. I f no one requests a hearing, this application will be determined by order of the Commission on the basis of the facts stated therein and other information contained
in the official files o f the Commission pertaining thereto.
For the Commission (pursuant to delegated authority).
[ seal ] O rval h. DuBois,Secretary.
[F.R. DOC. 66-5225; Filed, May 12, 1966;8:47 ajn .]
[File No. 7-2553]
UNITED STATES STEEL CORP.Notice of Application for Unlisted
Trading Privileges and of Opportunity for Hearing
M a y 9, 1966.In the matter of application of the
Detroit Stock Exchange for unlisted trading privileges in a certain security, Securities Exchange Act of 1934.
The above-named national securities exchange has filed an application with the Securities and Exchange Commission pursuant to section 12 (f)(1 )(B ) of the Securities Exchange Act of 1934 and Rule 12f—1 thereunder, for unlisted trading privileges in the common stock of the following company, which security is listed and registered on one or more other national securities.exchanges: United States Steel Corp., File 7-2553.
Upon receipt of a request, on or before May 25, 1966, from any interested person, the Commission will determine whether the application shall be set down for hearing. Any such request should state briefly the nature of the interest of the person making the request and the position he proposes to take at the hearing, if ordered. In addition, any interested person may submit his views or any additional facts bearing on the said application by means of a letter addressed to the Secretary, Securities and Exchange Commission, Washington 25, D.C., not later than the date specified. I f no one requests a hearing, this application will be determined by order of the Commission on the basis of the facts stated therein and other information contained in the official files of the Commission pertaining thereto.
For the Commission (pursuant to delegated authority).
[ seal ] O rval L. "DuBois,Secretary.
[F.R. Doc. 66-5226; Filed, May 12, 1966;8:47 am .]
[File NO. 7-2554]
UNITED STATES STEEL CORP.Notice of Application for Unlisted
Trading Privileges and of Opportunity for Hearing
M a y 9,1966.In the matter of application of the
Philadelphia - Baltimore - Washington Stock Exchange for unlisted trading privileges in a certain security, Securities Exchange Act of 1934.
The above-named national securities exchange has filed an application with
FEDERAL REGISTER, VOL. 31, NO. 93— FRIDAY, MAY 13, 1966
NOTICES 7097the Securities and Exchange Commission pursuant to section 12(f) (1) (B ) of the Securities Exchange Act of 1934 and Rule 12f-l thereunder, for unlisted trading privileges in the common stock of the following company, which security is listed and registered on one or more other national securities exchanges: United States Steel Corp., Pile 7-2554.
Upon receipt of a request, on or before May 25, 1966, from any interested pier- son, the Commission will determine whether the application shall be set down for hearing. Any such request should state briefly the nature of the interest of the person making the request and the position he proposes to take at the hearing, if ordered. In addition,any interested person may submit his views or any additional facts bearing on the said application by means of a letter addressed to the Secretary, Securities and Exchange Commission, Washington 25, D.C., not later than the date specified. If no one requests a hearing, this application will be determined by order of the Commission on the basis of the facts stated therein and other information contained in the official files of the Commission pertaining thereto.
For the Commission (pursuant to delegated authority).
[ seal ] O r val L. DuBois,Secretary.
[P.R. Doc. 66-5227; Piled, May 12, 1966;8:47 a.m.]
[Pile No. 7-2555]
UNITED STATES STEEL CORP.Notice of Application for Unlisted
Trading Privileges and of Opportunity for Hearing
May 9,1966.In the matter of application of the
Pittsburgh Stock Exchange for unlisted trading privileges in a certain security, Securities Exchange Act of 1934.
The above-named national securities exchange has filed an application with the Securities and Exchange Commission pursuant to section 12(f) ( l ) (B) of the Securities Exchange Act of 1934 and Rule 12f-l thereunder, for unlisted trading privileges in the common stock of the following company, which security is listed and registered on one or more other national securities exchanges:United States Steel Corp., Pile 7-2555.
Upon receipt of a request, on or before May 25, 1966, from any interested person, the Commission will determine whether the application shall be set down for hearing. Any such request should state briefly the nature of the interest of the person making the request and the position he proposes to take at the hearing, if ordered. In addition, any interested person may submit his views or any additional facts bearing on the said application by means of a letter addressed to the Secretary, Securities and Exchange Commission, Washington 25, D.C., not later than the date specified.
I f no one requests a hearing, this application will be determined by order of the Commission on the basis of the facts stated therein and other information contained in the official files of the Commission pertaining thereto.
For the Commission (pursuant to delegated authority).
[SEAL] ORVAL L. DUBOIS,Secretary.
[F.R. Doc. 66-5228; Piled, May 12, 1966;8:47 a.m.]
SMALL BUSINESS[Delegation of Authority 30, New York
Region; Rev. 1, Arndt. 1]
NEW YORK REGIONAL OFFICEDelegation of Authority To Conduct
Program ActivitiesPursuant to the authority delegated to
the Regional Director by Delegation of Authority 30-1 New York, 30 F.R. 2885 as amended, 30 F.R. 9078, 13030, 13418, and 31 F.R. 3274; Delegation of Authority 30, F.R. 12137 is hereby amended to add the following authority to Item 1 .0 .:
J * * *G. To Loan Specialist GS-9 and above
assigned to all financial assistance division programs in all offices of this region. Final authority to approve the following actions concerning current direct or participation loans:
1. Use of the cash surrender value of life insurance to pay the premium on the policy.
2. Release of dividends of life insurance or consent to application against premiums.
3. Minor modifications in the authorization.
4. Extension of disbursement period.5. Extension of initial principal pay
ments.6. Adjustment of Interest payment
dates.7. Release of hazard insurance checks
not in excess of $200 and endorse such checks on behalf o f the agency where SBA is named as joint loss payee.
Effective date. April 25, 1966.R a y m o n d B . Cu r r an ,
Acting Regional Director,New York Regional Office.
[P.R. Doc. 66-5229; Piled, May 12, 1966;8:48 a.m.]
[Delegation of Authority 30, Puerto Rico Region; Rev. 1, Arndt. 1]
PUERTO RICO REGIONAL OFFICEDelegation of Authority To Conduct
Program ActivitiesPursuant to the authority delegated to
the Regional Director by Delegation of Authority 30, Puerto Rico, 30 F.R. 2885 as amended, 30 F.R. 9078, 13030, 13418, and 31 F.R. 3274; Delegation of Author
ity 30, F.R. 12139 is hereby amended to add the following authority to Item I.G.:
J * * *G. To Loan Specialist GS-9 and above
assigned to all financial assistance division programs in all offices of this region. Final authority to approve the following actions concerning current direct or participation loans:
1. Use of the cash surrender value of life insurance to pay the premium on the policy.
2. Release of dividends of life insurance or consent to application against premiums.
3. Minor modifications in the authorization.
4. Extension of disbursement period.5. Extension of initial principal pay
ments.6. Adjustment of interest payment
dates.7. Release of hazard insurance checks
not in excess of $290 and endorse such checks on behalf of the agency where SBA is named as joint loss payee.
Effective date. April 25, 1966.A n t o n io Y ordan , Regional Director,
Puerto Rico Regional Office.[F.R. Doc. 66-5230; Piled, May 12, 1966;
8:48 a.m.]
[Delegation of Authority 30, Syracuse Region; Rev. 1, Arndt. 1]
SYRACUSE REGIONAL OFFICEDelegation of Authority To Conduct
Program ActivitiesPursuant to the authority delegated to
the Regional Director by Delegation of Authority 30, Syracuse, 30 F.R. 2885 as amended, 30 F.R. 9078, 13030, 13418, and 31 FJt. 3274; Delegation of Authority 30, F.R. 12138 is hereby, amended to add the following authority to Item I.G. :
J * * *G. To Loan Specialists GS-9 and
above assigned to all financial assistance divisions programs in all offices of this region. Final authority to approve the following actions concerning current direct or participation loans :
1. Use of the cash surrender value of life insurance to pay the premium on the policy.
2. Release of dividends of life insurance or consent to application against premiums.
3. Minor modifications in the authorization.
4. Extension of disbursement period.5. Extension of initial principal pay
ments.6. Adjustment of interest payment
dates.7. Release of hazard insurance checks
not in excess of $200 and endorse such checks on behalf of the agency where SBA is named as joint loss payee.
Effective date. April 25,1966.J. W il s o n H ar r iso n ,
Regional Director, Syracuse Regional Office.
[P.R. Doc. 66-5231; Filed, May 12, 1966; 8:48 a.m.]
FEDERAL REGISTER, VOL. 31, NO. 93— FRIDAY, MAY 13, 1966
13259233
7098 NOTICES[Delegation of Authority 30, Minneapolis,
Minn., Region; Rev. 1, Arndt. 1]
MINNEAPOLIS REGIONAL OFFICEDelegation of Authority To Conduct
Program ActivitiesPursuant to the authority delegated to
the Regional Director by Delegation of Authority 30 F.R. 3252, as amended by 30 F.R. 13556 and 30 F.R. 14062; Delegation of Authority 30 F.R. 4734, as amended by 31 F.R. 3274 is hereby amended to add the following authority as Item I.G.:
j # * *G. To Loan Specialists GS-9 and
above assigned to all financial assistance division programs in aU offices of this region. Final authority to approve the following actions concerning current direct or participation loans:
1. Use of the cash surrender value of life insurance to pay the premium on the policy.
2. Release of dividends of life insurance or consent to application against premiums.
3. Minor modifications In the authorization.
4. Extension of disbursement period.5. Extension of initial principal pay
ments.6. Adjustment of interest payment
dates.7. Release of hazard insurance checks
not in excess of $200 and endorse such checks on behalf of the agency where SB A is named as joint loss payee.
Effective date. April 28,1966.H arry A. Sieben,
Regional Director, Minneapolis, Minn.
[F R . Doc. 66-5235; Filed, May 12, 1966; 8:48 a.m.]
[Declaration of Disaster Area 574]
ARKANSASDeclaration of Disaster Area
Whereas, it has been reported that during the month of May 1966, because of the effects of certain disasters, damage resulted to residences and business property located in Ouachita County in the State of Arkansas ;
Whereas, the Small Business Administration has investigated and has received other reports of investigations of conditions in the areas affected;
Whereas, after reading and evaluating reports of such conditions, I find that the conditions in such areas constitute a catastrophe within the purview of the Small Business Act, as amended.
Now, therefore, as Executive Administrator of the Small Business Administration, I hereby determine that:
1. Applications for disaster loans under the provisions of section 7(b) (1) of the Small Business Act, as amended, may be received and considered by the Office below indicated from persons or firms whose property, situated in the aforesaid County and areas adjacent thereto, suffered damage or destruction resulting from floods and accompanying conditions occurring on or about May 1, 1966.
Office
Small Business Administration Regional O ffice, 600 West Capital Avenue, Little Rock, Ark., 72201.
2. Applications for disaster loans under the authority of this Declaration will not be accepted subsequent to November 30, 1966.
Dated: May 3, 1966.Ross D. Davis,
Executive Administrator.[F.R. Doc. 66-5232; Filed, May 12, 1966;
8:48 a.m.]
[Declaration of Disaster Area 575]
LOUISIANADeclaration of Disaster Area
Whereas, it has been reported that during the month of May 1966, because of the effects of certain disasters, damage resulted to residences and business property located in Caddo Parish in the State of Louisiana;
Whereas, the Small Business Administration has investigated and has received other reports of investigations of conditions in the area affected;
Whereas, after reading and evaluating reports of such conditions, I find that the conditions in such area constitute a catastrophe within the purview of the Small Business Aet, as amended.
Now, therefore, as Executive Administrator of the Small Business Administration, I hereby determine that :
1. Applications for disaster loans under the provisions of section 7(b) (1) of the Small Business Act, as amended, may be received and considered by the Office below indicated from persons or firms whose property, situated in the aforesaid Parish and areas adjacent thereto, suffered damage or destruction resulting from a flood and accompanying conditions occurring on or about May 1, 1966.
Office
Small Business Administration Regional Office, 101 East Austin Street, Marshall, Tex.,75671.
2. Applications for disaster loans under the authority of this Declaration will not be accepted subsequent to November 30,1966.
Dated: May 3,1966.Ross D. Davis,
Executive Administrator.[F.R. Doc. 66-5233; Filed, May 12, 1966;
8:48 a jn .]
[Declaration of Disaster Area 573]
TEXASDeclaration of Disaster Area
Whereas, it has been reported that during the month of April 1966, because of the effects of certain disasters, damage resulted to residences and business property located in the State of Texas;
Whereas, the Small Business Administration has investigated and has re
ceived other reports of investigations of conditions in the areas affected;
Whereas, after reading and evaluating reports of such conditions, I find that the conditions in.such areas constitute a catastrophe within the purview of the Small Business Act, as amended.
Now, therefore, as Executive Administrator of the Small Business Administration, I hereby determine that:
1. Applications for disaster loans under the provisions of section 7(b)(1 ) of the Small Business Act, as amended, may be received and considered by the Offices below indicated from persons or firms whose property, situated in the aforesaid State, suffered damage or destruction resulting from floods and accompanying conditions occurring on or about April 24, 1966.
Offices
Small Business Administration Regional - Office, 411 North Akard Street, Dallas, Tex.,
75201.Small Business Administration Regional
Office, 101 East Austin Street, Marshall,Tex., 75671.
2. Temporary offices will be established in additional cities or areas in the State as a need is indicated, addresses to be announced locally.
3. Applications for disaster loans under the authority of this Declaration will not be accepted subsequent to November 30, 1966.
Dated: May 2, 1966.Ross D. Davis,
Executive Administrator.[F.R. Doc. 66-5234; Filed, May 12, 1966;
8:48 a.m.]
INTERSTATE COMMERCE COMMISSION
FOURTH SECTION APPLICATIONS FOR RELIEF
M a y . 10,1966.Protests to the granting of an appli
cation must be prepared in accordance with Ride 1.40 of the general rules of practice (49 CFR 1.40) and filed within 15 days from the date of publication of this notice in the Federal R egister.
Long-and-Short Haul
FSA No. 40467— TOFC Rates—Points in Connecticut to Beaumont, Tex. Filed by Southwestern Freight Bureau, agent (No. B-8849), for interested rail carriers. Rates on aluminum, brass, bronze, and copper articles, also electric cable and wire, in trailerloads, from specified points in Connecticut, to Beaumont, Tex.
Grounds for relief — Motor-water- motor competition.
Tariff—Supplement 13 to Southwestern Freight Bureau, agent, tariff ÌCC 4669.
FSA No. 40468—Soda ash to St. Louis, Mo., District Points. Filed by Traffic Executive Association-Eastern Railroads, agent (E.R. No. 2840), for interested rail carriers. Rates on soda ash, in bulk, in
FEDERAL REGISTER, VOL. 31, NO. 93— FRIDAY, MAY 13, 1966
NOTICES 7099
covered hopper cars, in carloads, from specified points in Michigan, New York, and Ohio, also Saltville, Va., to Alton, East St. Louis, Federal, Hartford, Roxana, and Wood River, 111., also St. Louis, Mo.
Grounds for relief—Market competition.
Tariffs—Supplement 17 to Akron, Canton & Youngstown Railroad tariff ICC 480, and other schedules named in the application.
By the Commission.[ seal ] H. N e il G arson ,
Secretary.[F.R. Doc. 66-5239; Filed, May 12, 1966;
8:48 a.zn.]
[Notice 1345]
MOTOR CARRIER TRANSFER PROCEEDINGS
M a y 10, 1966.Synopses of orders entered pursuant
to section 212(b) of the Interstate Commerce Act, and rules and regulations prescribed thereunder (49 CFR Part 179), appear below:
As provided in the Commission’s special rules of practice any interested person may file a petition seeking reconsideration of the following numbered proceedings within 20 days from the date of publication of this notice. Pursuant to section 17(8) of the Interstate Commerce Act, the filing of such a petition will postpone the effective date of the order in that proceeding pending its disposition. The matters relied upon by petitioners must be specified in their petitions with particularity.
No. MC-FC-68627. By order of May 6, 1966, the Transfer: Board approved the transfer to Meek Trucking Co., a Corporation, Knights Landing, Calif., of the operating rights in the certificate in No. MC-123523 (Sub-No. 2), and the certificate of registration in No, MC- 123523 (Sub-No. 4), issued October 17, 1961, and September 24, 1964, respectively, to William H. Meek, Jr., doing business as McDermott Trucking, Knights Landing, Calif., the certificate authorizing transportation, in interstate or foreign commerce, of animal and poultry feeds, in bulk, from Robbins, Calif., and points within 10 miles thereof, to Sacramento, Stockton, Oakland, Alameda, and San Francisco, Calif, j and thé certificate of registration evidencing a right to engage in transportation in interstate or foreign commerce solely in the State of California, corresponding to certificate of public convenience and necessity granted in decision No. 62131, dated June 13, 1961, as amended by decision No. 64092, dated August 7, 1962, by the Public Utilities Commission of the State of California. Bertram S. Silver, 140 Montgomery Street, San Francisco, Calif., 94104, attorney for applicants.
No. MC-FC-68628. By order of May 6, 1966, the Transfer Board approved the transfer to Mary Kirkpatrick, doing business as Kirkpatrick Trucking, Harvard, 111., of the operating rights in
permit No. MC-126389, issued July 28,1965, and certificates Nos. MC-106594, issued July 28, 1965, and MC-106594 (Sub-No. 2), issued July 14, 1955, to Seth Kirkpatrick, doing business as Kirkpatrick Trucking, Harvard, 111., the permit authorizing transportation, over irregular routes, of mineral wool and certain related items from Walworth, Wis., to points in Illinois, Indiana, Iowa, Michigan, Minnesota, and Missouri and nonedible starch, in bags, from Decatur,111., to Walworth, Wis., and the certificates authorizing transportation, over irregular routes, of livestock from named points in Walworth County, Wis., to Chicago, 111., bam lime from Chicago,111., to named points in Walworth County, Wis., and petroleum products, in bulk, in tank vehicles, from Chicago,111., to specified counties in Wisconsin. Dual operations were authorized. Charles B. Myers, 611 Field Building, Chicago, 111., 60603, attorney for applicants.
No. MC-FC-68672.- By order of May 6, 1966, the Transfer Board approved the transfer to H. Michael Reilly, doing business as Lorraine Horse Trans., Rockland, Mass., of the operating rights of Carver Vans, Elkridge, Md., in certificate No. MC-64071, issued January 13, 1943, authorizing the transportation, over irregular routes, of livestock, other than ordinary livestock, and, in connection therewith, personal effects of attendants, supplies, and equipment, including mascots, used in the care and/or exhibition of such animals, over irregular routes, between points in Maryland, Rhode Island, New York, Massachusetts, New Hampshire, Virginia, West Virginia, Delaware, Pennsylvania, New Jersey, Connecticut, Ohio, and the District of Columbia. Eli J. Golden, 702 Court Square, Baltimore, Md., attorney for transferor. Mary E. Kelley, 10 Tremont Street, Boston 8, Mass., attorney for transferee.
No. MC-FC-68676. By order of May 6,1966, the Transfer Board approved the transfer to John D. Bohr, Inc., Annville, Pa., of the operating rights in certificates Nos. MC-115379, MO-115379 (Sub-No. 2), MC-115379 (Sub-No. ,3), MC-115379 (Sub-No. 5), MC-115379 (Sub-No. 6), MC-115379 (Sub-No. 7), MC-115379 (Sub-No. 9), MC-115379 (Sub-No. 10), MC-115379 (Sub-No. 11), MC-115379 (Sub-No. 14), MC-115379 (Sub-No. 16), and MC—115379 (Sub-No. 24), issued October 9, 1956, September 26, 1958, February 13,1959, July 18,1961, November 8, 1961, April 25,1963, August 13,1963, February 24, 1964, May 6,1964, July 21, 1965, June 30, 1965, and April 25, 1966, respectively, to John D. Bohr, Jr., Annville, Pa., authorizing the transportation of: Various commodities, i.e., limestone, sand, phosphate, fish meal, shells, and fish scrap, between points in Delaware, Maryland, New Jersfey, New York, Pennsylvania, Virginia, and the District of Columbia. Christian V. Graf, 407 North Front Street, Harrisburg, Pa., attorney for applicants.
No. MC-FC-68684. By order of May 6, 1966, the Transfer Board approved the transfer to Newman Bros. Trucking Co.,
a Corporation, Fort Worth, Tex., of the operating rights of Oscar Fuchshuber, doing business as Fuchshuber Trucking, Fort Worth, Tex., in certificate of registration No. MC-120761 (Sub-No. 1), issued April 20, 1964, authorizing the transportation, between all points in Texas, except that where both origin and destination are places within the corporate limits of a city, town, or village on the certificated route of a fixed route motor common carrier, or are places at which a railroad, or railroads performs pickup and delivery service, applicants are restricted to transport only those articles specifically limited as to height, width, length, weight, or other physical characteristics, of pipe, when moving as oilfield equipment, oilfield equipment, other than pipe, when it is to be used in the construction of pipe lines of any and every other character or use, ditching machinery, and various other types of machinery and equipment, the specified restrictions varying with the commodities indicated. Beal Dean, 203 Fort Worth Club Building, Fort Worth, Tex., 76102, attorney for Applicants.
No. MC-FC-68688. By order of May 6, 1966, the Transfer Board approved the transfer to Irvington Trucking, Inc., Irvington, N.J., of the operating rights in certificate No. MC-113305, issued May 15, 1952, to Barney’s Express, Inc., Irvington, N.J., authorizing the transportation of: General commodities, with exceptions, over irregular routes between points in Essex County, N. J., on the one hand, and, on the other, points in the New York, N.Y., commercial zone, and incandescent lamps and bulbs, from East Newark, N. J., to points in the New York, N.Y., commercial zone. James J. Farrell, 201 Montague Place, South Orange, N.J., 07079, representative for applicants.
[ seal ] H . N e il G ar so n ,Secretary.
[F.R. Doc. 66-5240; Filed, May 12, 1966;8:49 a.m.]
DEPARTMENT OF LABOROffice of the Secretary
[Secretary’s Order 32-63; Arndt.]
WAGE APPEALS BOARDDelegation of Prevailing Wage De
termination Duties Under the Tennessee V a l le y Authority Act; Amendment Revoked1. Authority. This order is issued
pursuant to R.S. 161 (5 U.S.C. 22) and Reorganization Plan No. 6 of 1950 (5 U.S.C. 611 note).
2. Revocation. The amendment of Secretary’s Order No. 32-63 published in 31 F.R. 5649 is hereby revoked.
Signed at Washington, D.C., this 4th day of May 1966.
W . W illard W ir tz , Secretary of Labor.
[F R . Doc. 66-5222; Filed, May 12, 1966; 8:47 a.m.]
FEDERAL REGISTER, VOL. ^31, NO. 93— FRIDAY, MAY 13, 1966
7100 FEDERAL REGISTER
CUMULATIVE LIST OF PARTS AFFECTED— MAY
The following numerical guide is a list of the parts of each title of the Code of Federal Regulations affected by documents published to date during May.
3 CFR Pa8eP roclamation:
3718 _____________________ 65673719 _____________________ 66073720 _____________________ 66793721 _ 68173722 _____________________ 68553723 __ - _________________ 69453724 _____________________ 7927
Executive Order:11017 (Superseded by EO
11278)_____________________ 668111069 (Superseded by EO
11278)_____________ 868111218 (Superseded by EO
11278)________________$----- 668111277 _____________________ 660911278 _____________________ 668111279______________________ — 6947
P r esid ential D o c u m en ts O ther T h a n P roclam ations and E xec u t iv e O rders:
Reorganization Plan No. 2 of1966____________________________ — 6857
5 CFR213_________________ 6769, 6859, 6903, 6949772_______________________________ 6569, 6949
6 CFR70.................... 7029
7 CFR7________________ 656950_____________________________________ 657068_,__________________________________ 6629701_______ 6957718 _____________________________ 6859719 ______________________ 7030722______________ - ________ 6573, 6580, 6859724____________________________________ 6819729___ ___________________________ 6581, 6957813____________________________________ 6819815____________________________________ 6860905____________________________________ 6958908 ________________________ 6825, 7030909 ______________________ 6825910 __________ ;__________________ 6826918______________________ 6958944____________________________________ 6959
I 959____________________________________ 68601980__________________ _____ ____________ 6629
1098 ____________ ;_______________ 65811099 _____________________________ 68611421____________________ _____________ 69041427___________________________________ 68611434__________________________________ 65821490__________________________________ 6862P roposed R u l e s :
52_______________________________ 687158— ____________________ ________ 6715916______________________________ 6871965______________________________ 65921032___________ _________________ 66311038 ________________________ 70611039 ________________________ 70611050_____________________________ 66311065_____ _______________________ 68731125 ________________________ *70621126 ________________________ 66311133____________________ ________ 6986
8 CFR page214...... 6611
9 CFR76__________ •____________ _____— 7029
12 CFR1.............................. 6826, 690510 _____________________ 694911 _____________ — 695012 _______________ 695213 ____________________ _______ - 695314 ____________________ 695415 ___________________________ —— 695516 _________________________ 6955522-,___________ — — ________ - 6905524—...... 6905
14 CFR39__________ 6582, 6685, 6790, 6959, 703171,_____— ____—________ — 6582,
6584, 6791, 6826, 6827, 6864, 6959, 6960, 7031.
73_________________________________ 6893, 703297— — _____ 6612, 6685, 6828, 6894137— ______________________ — 6685151_______________ — 6686208________ :______________________ 6620223______ — 6584320__________ — 6585378 _____________ — 6621P roposed R u l e s :
37_____ 708471__________ ______ _____:_____6716,
6717, 6837, 6838, 6873, 6908, 698775____________________________ 7085105_____________ 6988121________________ 6592246___________________________ 6986
15 CFR30______________________ 6587369_______________ s_______________ 7037372 _________________________ 7038373 _____________________ 6707, 7038374 ______________________________— 6707377_________________________ ;_____ 6707379 _________________________ 6709382____________________ 6707, 6709, 7038384 _____________________ 6709, 6864385 _____________ —_________ 6709399_________ 6707, 6709, 6829, 6866, 7038
16 CFR13 ___________________________ 7056-705915_________________________________ 6866, 690659________________________________ 6960
17 CFR200___________________________ 6588240________________________________ 6705, 6706
19 CFR1 _______ __________________ 661110________________________________ 6769P roposed R u l e s :
1_____________________________ 687120____________________________ 6908
20 CFR404______________________ 6611
21 CFR121— ________________________
131______________146c_____________191______________P roposed R u l e s :
51__________
24 CFR200- _________________________
26 CFRl ___________ ____31_______________P roposed R u l e s :
1_________28 CFR
29 CFR548_____________800___________ —
31 CFR90_______ _______202_________ ____316_____________332_____________
32 CFR300___________ _706_____________1472____________1810____- _______
32A CFRBDSA (Ch. V I) :BDSA Reg. 2___M -11A__________
33 CFR203________ _____207 _______208 _______
35 CFR255__________ __
38 CFR2_______________21______________
39 CFRP roposed R u le s
21— ______24_________
41 CFR6-1_____________6-2_____________6-3_____________6-5_____________6-7_____________6-11___________6-30___________6-60_________ —9-12___________22-60__________101-26_________101-45— .........
Page
___ 68306705, 6906___ 6830____ 6622
6792
6866
6589, 6966 ___ 6589
6966
6867
67696770
___ 6960___ 6590___ 68316686, 6831
6831696269066962
65907036
_________ 69076590,6622, 6867 _________ 6707
6831
67706771
67156715
6622662366236624 6624 662466246625 6907 6625 6963 6831
FEDERAL REGISTER 7101
43 CFR PageP u b l ic L and O rders:3977 (amended by PLO 4000)_____ 68683999 ... 69074000 ___________ 6868P roposed R u l e s :
1727____________ _____ _______ 69842221__________________ 69853130__________________________ 68343160_.................... 6836
45 CFR177............ 6591801____ 659146 CFR309________________________ 6891P roposed R u l e s :
510— .------------------------------ 6792512 ________________________ 6838513 ____________ __;_________ » 6838
47 CFR0 ________ _________________ ._ 6627, 68311 --------- 6831,686873--------------------------- 6627,6628,6868Proposed Rules :
2------------------------------ _' 6909, 708673_ 6637,6638, 6792,6838, 6874, 708687------------------------------------ 6909, 7086
48 CFR16 .................. - ............... .......... 703217 --------------------------------- _____ 703318........................ 703419—____________ ______________ /_ 703449 CFR71-79............... 659195------------ 6832142_-------- 6964188---------------------------------------- 696450 CFR33................. 6629, 6832, 6869, 6893, 696460----------------------------------------------- 6833P roposed R u l e s :
32......... ................................... ___ 7061
ILS. GOVERNMENT ORGANIZATION MANUAL
The United States Government Organization Manual is the official guide to the functions of the Federal Government
Presen ts authoritative information about Government agencies*D escrib es the creation and authority, organization, and fune- tions of the agencies in the legislative, judicial, and executive branches.This handbook is an indispensable reference fool for teachers, librarians, scholars* lawyers, and businessmen who need cur* rent official information about the U,S. Government.
$ 1 7 5per copy. Paperbouncf, with charts
Order fromSuperintendent of Documents, U.S. Government Printing Office« Washington, D.C., 20402.