PRICE LIST 2021

260
PRICE LIST 2021

Transcript of PRICE LIST 2021

LOGLI MASSIMO SpA Via Chemnitz, 49/51 59100

Prato - Italia Tel. +39.0574.848111

Fax +39.0574.527574

www.loglimassimo.it

[email protected]@saint-gobain.com

PRIC

E LI

ST 2

02

1

PRICE LIST 2021

EN

HOW TO READ THE PRICE LIST AND CONDITIONS page 2

SYSTEMS FOR GLASS BALUSTRADES page 4

SYSTEMS FOR OUTDOORS page 21

SYSTEMS FOR GLASS PARTITIONS page 29

GLASS HOLDER AND POINT FIXINGS page 40

STEEL SYSTEMS FOR SLIDING DOORS page 62

ALUMINIUM SYSTEMS FOR SLIDING DOORS page 72

SYSTEMS FOR HINGED DOORS page 105

PULL HANDLES AND KNOBS page 126

SYSTEMS FOR SHOWER PARTITIONS page 139

SYSTEMS FOR SHOWCASES AND SHELVES page 186

SYSTEMS FOR UV BONDING page 207

ACCESSORIES FOR GLASSWORKS page 221

ANALYTICAL INDEX page 241

GENERAL SALES CONDITIONS page 252

CONTENTS BY SECTOR

PRICE LIST 2021

ORDERS• Orders will be accepted only if sent by e-mail to [email protected] or by fax to +39 0574-527574.• A minimum order amount of 50,00 € goods value is required. For orders with a lower amount, 3,00 € management cost will be charged.• An order confirmation to confirm you the receiving of your request, together with the shipment details, will be sent - but it has to be compulsorily

checked by your side.• Gaskets are sold in minimum quantity of 10 pieces (also mixed models), while profiles in a minimum quantity of 5 pieces (also mixed

models). Items that require a minimum quantity are identified in the price list with the symbol ●.- Orders with lower quantities than required can be dispatched, yet with an additional charge for each category of item as follows:- 3,00 € for lengths of 2000 mm- 4,00 € for lengths of 2200 mm- 5,00 € for lengths of 2500 mm- 6,00 € for lengths of 3000 mm- 15,00 € for lengths longer than 3000 mm

SHIPPINGAvailable products are dispatched within 48 hours from payment receipt.In case of completely or partially out of stock goods, any delay will be notified in the shortest time: subject to prior agreement with you, these will be shipped out separately with relative charge of transport costs, where foreseen. We would like to point out that the shipment of long packages and / or on pallets cannot be made by express courier and therefore will be subject to longer delivery times.We invite you to take this into account when ordering, communicating any needs to the sales office

TRANSPORT - Conditions and costsDeliveries are through our forwarders, and freight costs are always at your charge, to be agreed time by time according to the ordered material; in case you prefer to use your own courier, you are kindly required to specify it when placing orders.Shipping costs vary according to the length, volume and weight of the goods and will be communicated to you on the order confirmation. Please note that transport costs are indicative and in case of shipments with more orders they can change depending on the real weight of the material. For that reason, they will be recalculated before the shipment.

The items identified by the ▶ symbol are shipped with the following packaging:- Up to 3.00 m, up to 5 units, single packaging, loose packages- Up to 3.00 m, from 6 to 19 units, single packaging, on pallets- Up to 3.00 m, over 19 units, industrial packaging, on pallets- Over 3.00 m, up to 3 units, single packaging, loose packages- Over 3.00 m, from 4 to 19 units, single packaging, on pallets- Over 3.00 m, over 19 units, industrial packaging, on palletsSingle packaging: the items identified by the ▶ symbol will be packaged in loose packages suitable for transport.Industrial packaging: the items identified with the ▶ symbol will be grouped on pallets subsequently packed for transport. The items inside the pallet may not have individual packaging.For logistical needs of the company, the type of packaging may vary without notice.We remind you that goods always travels at buyer’s risk. At the delivery, before signing the delivery note to the courier, it’s highly suggested to count the packages (the courier is required to know the total number), to check their integrity and, if possible, to open them. In case of anomalies (damaged / torn / open or missing packages, damaged products, etc.) indicate it strictly and clearly on the delivery note as a manuscript and signed SPECIFIC reserve, together with the delivery date.If you do not have the possibility to check the material or to put the reserve: refuse the material and notify us immediately.In case of damaged material, and if this has been accepted without declaring the reserve, the refund to the courier cannot be requested: consequently, no refund to you will be possible.In any case, you are required to check the conformity of the material received. Any complaint must reach us within 8 working days from the delivery. After this period, no complaint will be accepted.

BILLINGA single invoice will be issued for each shipment and sent afterwards per email.

Our offices are open Monday-Friday, from 08h00 to 13h00 and from 14h00 to 17h00 (GMT +1)

Tel.: +39 0574 848111 Fax: +39 0574 527574E-mail: [email protected]: www.loglimassimo.it

GENER

AL SAL

ES C

ONDITIO

NS – 2

021

SYSTEMS FOR SHOWER PARTITIONS

HD SQUARE SMALL SERIES HINGES 6/8 mm

DQ30COV/1 DQ30 hinge with plate without visible screws Chrome 1 Pc

DQ30COV/24 DQ30 hinge with plate without visible screws Brushed effect steel 1 Pc

DQ30COV/65 DQ30 hinge with plate without visible screws Matt black 1 Pc

DQ30COV/R2 DQ30 hinge with plate without visible screws RAL9005 Matt black 1 Pc

Art. Description Finish Q.ty EURO

79,86

84,12

93,47

120,18

HOW TO READ THE PRICE LIST Reference to the section

Picture of the itemItem code

Identification codeprevalent colour of the metal(last part of the code, see table above)

Description and measurements of item

Prevalent colour of themetal

Quantityper package

Price

RETURNSYou have 8 working days from the delivery date to inform us of your intentions to return the material by sending us a written request by email or fax (on-demand or custom-made articles excluded). In case of notification after the required 8 working days from the delivery, within 30 days from the invoice date, 15% of the goods value will be charged with a minimum of 15,00 € for controls costs.For notifications after 30 days and within 180 days from the invoice date, 50% of the goods value will be charged with a minimum of 15,00 € for controls costs. No returns allowed for purchases over 180 days from the invoice date.The goods return has to be first authorized by our Company thorough specific form before the back shipping of the material, otherwise its delivery will not be accepted. Once you receive the authorization, you can proceed with the return of the goods, being sure that the products are complete, intact and in the original packaging (check also to make a suitable packaging to avoid damages during transport). The shipment is at your charge and has to be done by your forwarder, whose name has to be previously communicated to us together with the shipment day in order to inform our warehouse staff, otherwise its delivery will not be accepted.ATTENTION:• any product returned incomplete or damaged will not be refunded• the credit will be issued only upon receipt of the product and after verifying its integrity• the value of the returned material can NOT be deducted IN ANY CASE from an invoice before the amount of the credit has been correctly calculated

PRIVACY GDPR European Privacy Regulation (679/2016)Customer personal collected data are online held and processed in compliance with legal obligations, and for sending promotional material.Customer have the right to check the existence, the updating, the verification and the cancellation of their collected personal data.

DISCLAIMERThe prices stated in this price list are considered valid from 01/01/2021 to 31/12/2021.This price list cancels and replaces all previous versions, as well as the pricelists of other brochures to it linked. All the images, texts, graphic, design are the sole property of LOGLI MASSIMO S.p.A.; total or partial reproduction is forbidden without express authorization. All violations will be persecuted by law.

NOTES FOR THE PRICE LISTTo make it easier to consult this price list, it has been organized into 12 sections, like the general catalogue. Many codes have a final number identifying the finish, as in the chart below:

/8 BRUSHED STEEL

/9 MACHINED STEEL (CNC)

/15 POLISHED STEEL

/10 RAW-FINISH ALUMINIUM

/88 BRUSHED STEEL EFFECT ALUMINIUM

/90 MACHINED ALUMINIUM

/91 POLISHED ALUMINIUM

/97 MATT ALUMINIUM/ANODISED ALUMINIUM

/RAL RAL 9010 POLISHED ALUMINIUM

/R2 RAL 9005 MATT ALUMINIUM

/1 CHROME

/7 MATT CHROME

/94 BRUSHED CHROME

/3 or /24 BRUSHED/STAINLESS STEEL EFFECT NICKEL

/92 MATT NICKEL

/95 NICKEL-PLATED

/2 GOLD

/22 PVD GOLD

/99 BRUSHED GOLD

/93 BRASS-PLATED

/4 BRONZE

/5 WHITE

/6 BLACK

/45 MATT EFFECT ALUMINIUM

/56 GREY

/65 MATT BLACK

/83 BRUSHED STEEL PVD

/89 GALVANISED IRON

TABLE OF PREVALENT METAL FINISHES

DEFENDER 450 KIT, COMPLETE WITH FLOOR INSTALLATION ACCESSORIES

▶DF45017,30/88 DEFENDER 450 Kit H 119.5 B 72 L 3000 mm, for 17.52 mm glass Brushed steel-effect aluminium 1 Set

▶ DF45017,15/88 DEFENDER 450 Kit H 119.5 B 72 L 1498 mm, for 17.52 mm glass Brushed steel-effect aluminium 1 Set

▶DF45021,30/88 DEFENDER 450 Kit H 119.5 B 72 L 3000 mm, for 21.52 mm glass Brushed steel-effect aluminium 1 Set

▶ DF45021,15/88 DEFENDER 450 Kit H 119.5 B 72 L 1498 mm, for 21.52 mm glass Brushed steel-effect aluminium 1 Set

▶DF45017,60/97 DEFENDER 450 Kit H 119.5 B 72 L 6000 mm, for 17.52 mm glass Matt aluminium 1 Set

▶DF45017,30/97 DEFENDER 450 Kit H 119.5 B 72 L 3000 mm, for 17.52 mm glass Matt aluminium 1 Set

▶ DF45017,15/97 DEFENDER 450 Kit H 119.5 B 72 L 1498 mm, for 17.52 mm glass Matt aluminium 1 Set

▶DF45021,60/97 DEFENDER 450 Kit H 119.5 B 72 L 6000 mm, for 21.52 mm glass Matt aluminium 1 Set

▶DF45021,30/97 DEFENDER 450 Kit H 119.5 B 72 L 3000 mm, for 21.52 mm glass Matt aluminium 1 Set

▶ DF45021,15/97 DEFENDER 450 Kit H 119.5 B 72 L 1498 mm, for 21.52 mm glass Matt aluminium 1 Set

▶DF45017,60/RAL DEFENDER 450 Kit H 119.5 B 72 L 6000 mm, for 17.52 mm glass RAL 9010 polished aluminium 1 Set

▶DF45017,30/RAL DEFENDER 450 Kit H 119.5 B 72 L 3000 mm, for 17.52 mm glass RAL 9010 polished aluminium 1 Set

▶ DF45017,15/RAL DEFENDER 450 Kit H 119.5 B 72 L 1498 mm, for 17.52 mm glass RAL 9010 polished aluminium 1 Set

▶DF45021,60/RAL DEFENDER 450 Kit H 119.5 B 72 L 6000 mm, for 21.52 mm glass RAL 9010 polished aluminium 1 Set

▶DF45021,30/RAL DEFENDER 450 Kit H 119.5 B 72 L 3000 mm, for 21.52 mm glass RAL 9010 polished aluminium 1 Set

▶ DF45021,15/RAL DEFENDER 450 Kit H 119.5 B 72 L 1498 mm, for 21.52 mm glass RAL 9010 polished aluminium 1 Set

▶DF45017,60/R2 DEFENDER 450 Kit H 119.5 B 72 L 6000 mm, for 17.52 mm glass RAL 9005 matt aluminium 1 Set

▶DF45017,30/R2 DEFENDER 450 Kit H 119.5 B 72 L 3000 mm, for 17.52 mm glass RAL 9005 matt aluminium 1 Set

▶ DF45017,15/R2 DEFENDER 450 Kit H 119.5 B 72 L 1498 mm, for 17.52 mm glass RAL 9005 matt aluminium 1 Set

▶DF45021,60/R2 DEFENDER 450 Kit H 119.5 B 72 L 6000 mm, for 21.52 mm glass RAL 9005 matt aluminium 1 Set

▶DF45021,30/R2 DEFENDER 450 Kit H 119.5 B 72 L 3000 mm, for 21.52 mm glass RAL 9005 matt aluminium 1 Set

▶ DF45021,15/R2 DEFENDER 450 Kit H 119.5 B 72 L 1498 mm, for 21.52 mm glass RAL 9005 matt aluminium 1 Set

▶DF45017,60/10 DEFENDER 450 Kit H 119.5 B 72 L 6000 mm, for 17.52 mm glass Raw-finish aluminium 1 Set

▶DF45017,30/10 DEFENDER 450 Kit H 119.5 B 72 L 3000 mm, for 17.52 mm glass Raw-finish aluminium 1 Set

▶ DF45017,15/10 DEFENDER 450 Kit H 119.5 B 72 L 1498 mm, for 17.52 mm glass Raw-finish aluminium 1 Set

▶DF45021,60/10 DEFENDER 450 Kit H 119.5 B 72 L 6000 mm, for 21.52 mm glass Raw-finish aluminium 1 Set

▶DF45021,30/10 DEFENDER 450 Kit H 119.5 B 72 L 3000 mm, for 21.52 mm glass Raw-finish aluminium 1 Set

▶ DF45021,15/10 DEFENDER 450 Kit H 119.5 B 72 L 1498 mm, for 21.52 mm glass Raw-finish aluminium 1 Set

DEFENDER DFS01 KIT, COMPLETE WITH SLAB INSTALLATION ACCESSORIES

▶DFS0117,30/88 DEFENDER DFS01 kit H 182 B 74.5 L 3000 mm, for 17.52 mm glass Brushed steel-effect aluminium 1 Set

▶ DFS0117,15/88 DEFENDER DFS01 kit H 182 B 74.5 L 1498 mm, for 17.52 mm glass Brushed steel-effect aluminium 1 Set

▶DFS0121,30/88 DEFENDER DFS01 kit H 182 B 74.5 L 3000 mm, for 21.52 mm glass Brushed steel-effect aluminium 1 Set

▶ DFS0121,15/88 DEFENDER DFS01 kit H 182 B 74.5 L 1498 mm, for 21.52 mm glass Brushed steel-effect aluminium 1 Set

▶DFS0117,60/97 DEFENDER DFS01 kit H 182 B 74.5 L 6000 mm, for 17.52 mm glass Matt aluminium 1 Set

▶DFS0117,30/97 DEFENDER DFS01 kit H 182 B 74.5 L 3000 mm, for 17.52 mm glass Matt aluminium 1 Set

▶ DFS0117,15/97 DEFENDER DFS01 kit H 182 B 74.5 L 1498 mm, for 17.52 mm glass Matt aluminium 1 Set

▶DFS0121,60/97 DEFENDER DFS01 kit H 182 B 74.5 L 6000 mm, for 21.52 mm glass Matt aluminium 1 Set

▶DFS0121,30/97 DEFENDER DFS01 kit H 182 B 74.5 L 3000 mm, for 21.52 mm glass Matt aluminium 1 Set

▶ DFS0121,15/97 DEFENDER DFS01 kit H 182 B 74.5 L 1498 mm, for 21.52 mm glass Matt aluminium 1 Set

▶DFS0117,60/10 DEFENDER DFS01 kit H 182 B 74.5 L 6000 mm, for 17.52 mm glass Raw-finish aluminium 1 Set

▶DFS0117,30/10 DEFENDER DFS01 kit H 182 B 74.5 L 3000 mm, for 17.52 mm glass Raw-finish aluminium 1 Set

▶ DFS0117,15/10 DEFENDER DFS01 kit H 182 B 74.5 L 1498 mm, for 17.52 mm glass Raw-finish aluminium 1 Set

▶DFS0121,60/10 DEFENDER DFS01 kit H 182 B 74.5 L 6000 mm, for 21.52 mm glass Raw-finish aluminium 1 Set

▶DFS0121,30/10 DEFENDER DFS01 kit H 182 B 74.5 L 3000 mm, for 21.52 mm glass Raw-finish aluminium 1 Set

▶ DFS0121,15/10 DEFENDER DFS01 kit H 182 B 74.5 L 1498 mm, for 21.52 mm glass Raw-finish aluminium 1 Set

GLASS BALUSTRADE SYSTEMS – DEFENDER

Page 4

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 40/41 >>>

916,80

458,40

916,80

458,40

1.705,53

855,52

427,76

1.705,53

855,52

427,76

1.694,32

849,92

424,96

1.694,32

849,92

424,96

1.795,48

900,50

450,25

1.795,48

900,50

450,25

1.272,26

638,87

319,43

1.272,26

638,87

319,43

1.067,70

533,85

1.067,70

533,85

1.954,50

980,42

490,21

1.954,50

980,42

490,21

1.475,46

740,90

370,45

1.475,46

740,90

370,45

AS

LO

NG

AS

ST

OC

KS

LA

ST

-

A

S L

ON

G A

S S

TO

CK

S L

AS

T

-

AS

LO

NG

AS

ST

OC

KS

LA

ST

-

A

S L

ON

G A

S S

TO

CK

S L

AS

T

-

AS

LO

NG

AS

ST

OC

KS

LA

ST

GLASS BALUSTRADE SYSTEMS – DEFENDER

Page 5 >>> CATALOGUE REFERENCE PAGE 42/43 >>>

DEFENDER 450 PROFILE FLOOR INSTALLATION

▶DF450,30/88 DEFENDER 450 profile, pre-drilled H 111.5 B 72 L 3000 mm Brushed steel-effect aluminium 1 Pc

▶ DF450,15/88 DEFENDER 450 profile, pre-drilled H 111.5 B 72 L 1498 mm Brushed steel-effect aluminium 1 Pc

▶DF450,60/97 DEFENDER 450 profile, pre-drilled H 111.5 B 72 L 6000 mm Matt aluminium 1 Pc

▶DF450,30/97 DEFENDER 450 profile, pre-drilled H 111.5 B 72 L 3000 mm Matt aluminium 1 Pc

▶ DF450,15/97 DEFENDER 450 profile, pre-drilled H 111.5 B 72 L 1498 mm Matt aluminium 1 Pc

▶DF450,60/RAL DEFENDER 450 profile, pre-drilled H 111.5 B 72 L 6000 mm RAL 9010 polished aluminium 1 Pc

▶DF450,30/RAL DEFENDER 450 profile, pre-drilled H 111.5 B 72 L 3000 mm RAL 9010 polished aluminium 1 Pc

▶ DF450,15/RAL DEFENDER 450 profile, pre-drilled H 111.5 B 72 L 1498 mm RAL 9010 polished aluminium 1 Pc

▶DF450,60/R2 DEFENDER 450 profile, pre-drilled H 111.5 B 72 L 6000 mm RAL 9005 matt aluminium 1 Pc

▶DF450,30/R2 DEFENDER 450 profile, pre-drilled H 111.5 B 72 L 3000 mm RAL 9005 matt aluminium 1 Pc

▶ DF450,15/R2 DEFENDER 450 profile, pre-drilled H 111.5 B 72 L 1498 mm RAL 9005 matt aluminium 1 Pc

▶DF450,60/10 DEFENDER 450 profile, pre-drilled H 111.5 B 72 L 6000 mm Raw-finish aluminium 1 Pc

▶DF450,30/10 DEFENDER 450 profile, pre-drilled H 111.5 B 72 L 3000 mm Raw-finish aluminium 1 Pc

▶ DF450,15/10 DEFENDER 450 profile, pre-drilled H 111.5 B 72 L 1498 mm Raw-finish aluminium 1 Pc

DEFENDER DFS01 PROFILE SLAB ASSEMBLY

▶DFS01,60/97 DEFENDER DFS01 profile, pre-drilled H 111.5 B 72 L 6000 mm Anodised aluminium 1 Pc

▶DFS01,30/97 DEFENDER DFS01 profile, pre-drilled H 111.5 B 72 L 3000 mm Anodised aluminium 1 Pc

▶ DFS01,15/97 DEFENDER DFS01 profile, pre-drilled H 111.5 B 72 L 1498 mm Anodised aluminium 1 Pc

▶DFS01,60/10 DEFENDER DFS01 profile, pre-drilled H 111.5 B 72 L 6000 mm Raw-finish aluminium 1 Pc

▶DFS01,30/10 DEFENDER DFS01 profile, pre-drilled H 111.5 B 72 L 3000 mm Raw-finish aluminium 1 Pc

▶ DFS01,15/10 DEFENDER DFS01 profile, pre-drilled H 111.5 B 72 L 1498 mm Raw-finish aluminium 1 Pc

DF135KIT12 Kit with 12 clamps and pressing devices, 6 m of glass gasket 13.52mm Black 1 Set

DF175KIT12 Kit with 12 clamps and pressing devices, 6 m of glass gasket 17.52mm Black 1 Set

DF215KIT12 Kit with 12 clamps and pressing devices, 6 m of glass gasket 21.52mm Black 1 Set

DF135 Clamp with pressing devices for 13.52 mm glass Black 1 Pc

DF175 Clamp with pressing devices for 17.52 mm glass Black 1 Pc

DF215 Clamp with pressing devices for 21.52 mm glass Black 1 Pc

●DF100,30/88 DEFENDER finishing profile 20.5 x 11 x L 3000 mm Brushed steel-effect aluminium 1 Pc

DF100,15/88 DEFENDER finishing profile 20.5 x 11 x L 1498 mm Brushed steel-effect aluminium 1 Pc

●DF100,60/97 DEFENDER finishing profile 20.5 x 11 x L 6000 mm Matt aluminium 1 Pc

●DF100,30/97 DEFENDER finishing profile 20.5 x 11 x L 3000 mm Matt aluminium 1 Pc

DF100,15/97 DEFENDER finishing profile 20.5 x 11 x L 1498 mm Matt aluminium 1 Pc

●DF100,60/RAL DEFENDER finishing profile 20.5 x 11 x L 6000 mm RAL 9010 polished aluminium 1 Pc

●DF100,30/RAL DEFENDER finishing profile 20.5 x 11 x L 3000 mm RAL 9010 polished aluminium 1 Pc

DF100,15/RAL DEFENDER finishing profile 20.5 x 11 x L 1498 mm RAL 9010 polished aluminium 1 Pc

●DF100,60/R2 DEFENDER finishing profile 20.5 x 11 x L 6000 mm RAL 9005 matt aluminium 1 Pc

●DF100,30/R2 DEFENDER finishing profile 20.5 x 11 x L 3000 mm RAL 9005 matt aluminium 1 Pc

DF100,15/R2 DEFENDER finishing profile 20.5 x 11 x L 1498 mm RAL 9005 matt aluminium 1 Pc

●DF100,60/10 DEFENDER finishing profile 20.5 x 11 x L 6000 mm Raw-finish aluminium 1 Pc

●DF100,30/10 DEFENDER finishing profile 20.5 x 11 x L 3000 mm Raw-finish aluminium 1 Pc

DF100,15/10 DEFENDER finishing profile 20.5 x 11 x L 1498 mm Raw-finish aluminium 1 Pc

Art. Description Finish Q.ty EURO

754,53

377,27

1.428,00

717,54

358,77

1.408,55

707,82

353,91

1.515,91

761,01

380,50

995,59

501,34

250,67

1.407,93

764,00

382,00

1.060,65

533,87

266,93

177,16

177,16

177,16

14,11

14,11

14,11

29,79

14,89

50,06

25,03

12,52

53,42

26,71

13,36

55,51

27,76

13,88

20,02

10,01

5,01

AS

LO

NG

AS

ST

OC

KS

LA

ST

-

A

S L

ON

G A

S S

TO

CK

S L

AS

T

-

AS

LO

NG

AS

ST

OC

KS

LA

ST

-

A

S L

ON

G A

S S

TO

CK

S L

AS

T

-

AS

LO

NG

AS

ST

OC

KS

LA

ST

●DF101,30/88 Toe-board profi le for DEFENDER DF450 and DFS01 43.5 x 11 x L 3000 mm Brushed steel-effect aluminium 1 Pc

DF101,15/88 Toe-board profi le for DEFENDER DF450 and DFS01 43.5 x 11 x L 1498 mm Brushed steel-effect aluminium 1 Pc

●DF101,60/97 Toe-board profi le for DEFENDER DF450 and DFS01 43.5 x 11 x L 6000 mm Matt aluminium 1 Pc

●DF101,30/97 Toe-board profi le for DEFENDER DF450 and DFS01 43.5 x 11 x L 3000 mm Matt aluminium 1 Pc

DF101,15/97 Toe-board profi le for DEFENDER DF450 and DFS01 43.5 x 11 x L 1498 mm Matt aluminium 1 Pc

●DF101,60/10 Toe-board profi le for DEFENDER DF450 and DFS01 43.5 x 11 x L 6000 mm Raw-fi nish aluminium 1 Pc

●DF101,30/10 Toe-board profi le for DEFENDER DF450 and DFS01 43.5 x 11 x L 3000 mm Raw-fi nish aluminium 1 Pc

DF101,15/10 Toe-board profi le for DEFENDER DF450 and DFS01 43.5 x 11 x L 1498 mm Raw-fi nish aluminium 1 Pc

●DFS03,30/88 DEFENDER DFS01 fi nishing front casing 119.5 x 23 x L 3000 mm Brushed steel-effect aluminium 1 Pc

DFS03,15/88 DEFENDER DFS01 fi nishing front casing 119.5 x 23 x L 1498 mm Brushed steel-effect aluminium 1 Pc

●DFS03,60/97 DEFENDER DFS01 fi nishing front casing 119.5 x 23 x L 6000 mm Matt aluminium 1 Pc

●DFS03,30/97 DEFENDER DFS01 fi nishing front casing 119.5 x 23 x L 3000 mm Matt aluminium 1 Pc

DFS03,15/97 DEFENDER DFS01 fi nishing front casing 119.5 x 23 x L 1498 mm Matt aluminium 1 Pc

●DFS03,60/10 DEFENDER DFS01 fi nishing front casing 119.5 x 23 x L 6000 mm Raw-fi nish aluminium 1 Pc

●DFS03,30/10 DEFENDER DFS01 fi nishing front casing 119.5 x 23 x L 3000 mm Raw-fi nish aluminium 1 Pc

DFS03,15/10 DEFENDER DFS01 fi nishing front casing 119.5 x 23 x L 1498 mm Raw-fi nish aluminium 1 Pc

●DFS05,30/88 DEFENDER DFS01 fi nishing lower casing 65 x 74.5 x L 3000 mm Brushed steel-effect aluminium 1 Pc

DFS05,15/88 DEFENDER DFS01 fi nishing lower casing 65 x 74.5 x L 1498 mm Brushed steel-effect aluminium 1 Pc

●DFS05,60/97 DEFENDER DFS01 fi nishing lower casing 65 x 74.5 x L 6000 mm Matt aluminium 1 Pc

●DFS05,30/97 DEFENDER DFS01 fi nishing lower casing 65 x 74.5 x L 3000 mm Matt aluminium 1 Pc

DFS05,15/97 DEFENDER DFS01 fi nishing lower casing 65 x 74.5 x L 1498 mm Matt aluminium 1 Pc

●DFS05,60/10 DEFENDER DFS01 fi nishing lower casing 65 x 74.5 x L 6000 mm Raw-fi nish aluminium 1 Pc

●DFS05,30/10 DEFENDER DFS01 fi nishing lower casing 65 x 74.5 x L 3000 mm Raw-fi nish aluminium 1 Pc

DFS05,15/10 DEFENDER DFS01 fi nishing lower casing 65 x 74.5 x L 1498 mm Raw-fi nish aluminium 1 Pc

●DFS07,30/88 Lower fi nish snap profi le for DFS01, 80 x 10 x 3000 mm Brushed steel-effect aluminium 1 Pc

DFS07,15/88 Lower fi nish snap profi le for DFS01, 80 x 10 x 1498 mm Brushed steel-effect aluminium 1 Pc

●DFS07,30/97 Lower fi nish snap profi le for DFS01, 80 x 10 x 3000 mm Matt aluminium 1 Pc

DFS07,15/97 Lower fi nish snap profi le for DFS01, 80 x 10 x 1498 mm Matt aluminium 1 Pc

●DFS07,30/10 Lower fi nish snap profi le for DFS01, 80 x 10 x 3000 mm Raw-fi nish aluminium 1 Pc

DFS07,15/10 Lower fi nish snap profi le for DFS01, 80 x 10 x 1498 mm Raw-fi nish aluminium 1 Pc

DF1010/6 Balloon gasket for 21.5 mm glass Black Per m

DF1010/56 Balloon gasket for 21.5 mm glass Grey Per m

DF1010.60/6 Balloon gasket for 21.5 mm glass - 60 metre package Black 1 Pack

DF1010.60/56 Balloon gasket for 21.5 mm glass - 60 metre package Grey 1 Pack

DF88/6 Balloon gasket for 13.5-17.5 mm glass Black Per m

DF88/56 Balloon gasket for 13.5-17.5 mm glass Grey Per m

DF88.60/6 Balloon gasket for 13.5-17.5 mm glass - 60 metre package Black 1 Pack

DF88.60/56 Balloon gasket for 13.5-17.5 mm glass - 60 metre package Grey 1 Pack

DF12072/8 DEFENDER 450 end cap H 120 B 72 mm - thickness 1 mm Brushed steel 1 Pc

DF12072AL/10 DEFENDER 450 end cap H 120 b 72 mm - thickness 1 mm Raw-fi nish aluminium 1 Pc

DF12072AL/97 DEFENDER 450 end cap H 120 b 72 mm - thickness 1 mm Matt aluminium 1 Pc

DF12072AL/88 DEFENDER 450 end cap H 120 b 72 mm - thickness 1 mm Brushed steel-effect aluminium 1 Pc

DF12072AL/RAL DEFENDER 450 end cap H 120 b 72 mm - thickness 1 mm RAL 9010 polished aluminium 1 Pc

DF12072AL/R2 DEFENDER 450 end cap H 120 b 72 mm - thickness 1 mm RAL 9005 matt aluminium 1 Pc

GLASS BALUSTRADE SYSTEMS – DEFENDER

Page 6

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 43/45 >>>

77,07

44,85

58,35

41,80

27,21

34,23

29,74

21,18

107,40

53,70

156,55

78,28

39,14

77,51

38,75

19,38

133,98

66,99

184,75

92,38

46,19

92,81

46,40

23,20

74,05

49,21

61,63

42,99

40,50

32,43

4,63

4,63

212,59

212,59

4,63

4,63

212,59

212,59

9,06

4,25

9,77

12,80

17,98

17,98

AS

LO

NG

AS

ST

OC

KS

LA

ST

-

A

S L

ON

G A

S S

TO

CK

S L

AS

T

-

AS

LO

NG

AS

ST

OC

KS

LA

ST

-

A

S L

ON

G A

S S

TO

CK

S L

AS

T

-

AS

LO

NG

AS

ST

OC

KS

LA

ST

GLASS BALUSTRADE SYSTEMS – DEFENDER

Page 7 >>> CATALOGUE REFERENCE PAGE 45/47 >>>

DFSDX/8 DEFENDER DFS01 RH end cap H 182 B 74 mm - th. 1 mm Brushed steel 1 Pc

DFSSX/8 DEFENDER DFS01 LH end cap H 182 B 74 mm - th. 1 mm Brushed steel 1 Pc

DFSDXAL/10 DEFENDER DFS01 RH end cap h 182 b 74 mm - th. 1 mm Raw-finish aluminium 1 Pc

DFSDXAL/97 DEFENDER DFS01 RH end cap h 182 b 74 mm - th. 1 mm Matt aluminium 1 Pc

DFSDXAL/88 DEFENDER DFS01 RH end cap h 182 b 74 mm - th. 1 mm Brushed steel-effect aluminium 1 Pc

DFSSXAL/10 DEFENDER DFS01 LH end cap h 182 b 74 mm - th. 1 mm Raw-finish aluminium 1 Pc

DFSSXAL/97 DEFENDER DFS01 LH end cap h 182 b 74 mm - th. 1 mm Matt aluminium 1 Pc

DFSSXAL/88 DEFENDER DFS01 LH end cap h 182 b 74 mm - th. 1 mm Brushed steel-effect aluminium 1 Pc

DF175TP/8 DEFENDER 450 open finishing cap h120 B 72 mm - th. 1mm - 17.52 mm glass panes Brushed steel 1 Pc

DF215TP/8 DEFENDER 450 open finishing cap h120 B 72 mm - th. 1mm - 21.52 mm glass panes Brushed steel 1 Pc

DF175TPAL/10 DEFENDER 450 open finishing cap h120 b 72 mm - th. 1mm - for 17.52 mm Raw-finish aluminium 1 Pc

DF175TPAL/97 DEFENDER 450 open finishing cap h120 b 72 mm - th. 1mm - for 17.52 mm Matt aluminium 1 Pc

DF175TPAL/88 DEFENDER 450 open finishing cap h120 b 72 mm - th. 1mm - for 17.52 mm Brushed steel-effect aluminium 1 Pc

DF215TPAL/10 DEFENDER 450 open finishing cap h120 b 72 mm - th. 1mm - for 21.52 mm Raw-finish aluminium 1 Pc

DF215TPAL/97 DEFENDER 450 open finishing cap h120 b 72 mm - th. 1mm - for 21.52 mm Matt aluminium 1 Pc

DF215TPAL/88 DEFENDER 450 open finishing cap h120 b 72 mm - th. 1mm - for 21.52 mm Brushed steel-effect aluminium 1 Pc

DF2TP/8 Finishing cap with “V” opening DEFENDER 450 h119.5 B 72 mm - th. 1mm Brushed steel 1 Pc

DF2TPAL/10 DEFENDER 450 finishing cap with “v” opening h119.5 b 72 mm - th. 1mm Raw-finish aluminium 1 Pc

DF2TPAL/97 DEFENDER 450 finishing cap with “v” opening h119.5 b 72 mm - th. 1mm Matt aluminium 1 Pc

DF2TPAL/88 DEFENDER 450 finishing cap with “v” opening h119.5 b 72 mm - th. 1mm Brushed steel-effect aluminium 1 Pc

DFSV2ALDX/10 DEFENDER DFS01 RH end cap with "V" opening h 182 b 74 mm - th. 1 mm Raw-finish aluminium 1 Pc

DFSV2ALDX/97 DEFENDER DFS01 RH end cap with "V" opening h 182 b 74 mm - th. 1 mm Matt aluminium 1 Pc

DFSV2ALDX/88 DEFENDER DFS01 RH end cap with "V" opening h 182 b 74 mm - th. 1 mm Brushed steel-effect aluminium 1 Pc

DFSV2ALSX/10 DEFENDER DFS01 LH end cap with end "V" opening h 182 b 74 mm - th. 1 mm Raw-finish aluminium 1 Pc

DFSV2ALSX/97 DEFENDER DFS01 LH end cap with end "V" opening h 182 b 74 mm - th. 1 mm Matt aluminium 1 Pc

DFSV2ALSX/88 DEFENDER DFS01 LH end cap with end "V" opening h 182 b 74 mm - th. 1 mm Brushed steel-effect aluminium 1 Pc

DF12772/8 Finishing cap for installation with profile DFA72, 126 x 72 mm - th. 1 mm Brushed steel 1 Pc

DF12772AL/10 Finishing cap for installation with profile DFA72, 126 x 72 mm - th. 1 mm Raw-finish aluminium 1 Pc

DF12772AL/97 Finishing cap for installation with profile DFA72, 126 x 72 mm - th. 1 mm Matt aluminium 1 Pc

DF12772AL/88 Finishing cap for installation with profile DFA72, 126 x 72 mm - th. 1 mm Brushed steel-effect aluminium 1 Pc

DF12077/8 Finishing cap installation with double cover DFS03, 119 x 77 mm - th. 1 mm Brushed steel 1 Pc

DF12077AL/10 Finishing cap installation with double cover DFS03, 119 x 77 mm - th. 1 mm Raw-finish aluminium 1 Pc

DF12077AL/97 Finishing cap installation with double cover DFS03, 119 x 77 mm - th. 1 mm Matt aluminium 1 Pc

DF12077AL/88 Finishing cap installation with double cover DFS03, 119 x 77 mm - th. 1 mm Brushed steel-effect aluminium 1 Pc

DFS130DX/8 RH finishing cap installation DFSA121 + DFS07, 129,6 x 89 mm - th. 1 mm Brushed steel 1 Pc

DFS130SX/8 LH finishing cap installation DFSA121 + DFS07, 129,6 x 89 mm - th. 1 mm Brushed steel 1 Pc

DFS130DXAL/10 RH finishing cap installation DFSA121 + DFS07, 129,6 x 89 mm - th. 1 mm Raw-finish aluminium 1 Pc

DFS130DXAL/97 RH finishing cap installation DFSA121 + DFS07, 129,6 x 89 mm - th. 1 mm Matt aluminium 1 Pc

DFS130DXAL/88 RH finishing cap installation DFSA121 + DFS07, 129,6 x 89 mm - th. 1 mm Brushed steel-effect aluminium 1 Pc

DFS130SXAL/10 LH finishing cap installation DFSA121 + DFS07, 129,6 x 89 mm - th. 1 mm Raw-finish aluminium 1 Pc

DFS130SXAL/97 LH finishing cap installation DFSA121 + DFS07, 129,6 x 89 mm - th. 1 mm Matt aluminium 1 Pc

DFS130SXAL/88 LH finishing cap installation DFSA121 + DFS07, 129,6 x 89 mm - th. 1 mm Brushed steel-effect aluminium 1 Pc

Art. Description Finish Q.ty EURO11,29

11,29

5,27

11,96

17,54

5,36

12,00

17,45

11,40

11,40

5,76

10,63

14,13

5,87

10,85

14,13

11,29

5,87

10,85

14,17

7,75

14,17

19,27

7,24

14,13

19,49

6,09

3,88

8,86

12,18

5,54

3,60

8,58

11,90

6,09

6,09

3,88

10,52

14,95

3,88

10,52

14,95

AS

LO

NG

AS

ST

OC

KS

LA

ST

-

A

S L

ON

G A

S S

TO

CK

S L

AS

T

-

AS

LO

NG

AS

ST

OC

KS

LA

ST

-

A

S L

ON

G A

S S

TO

CK

S L

AS

T

-

AS

LO

NG

AS

ST

OC

KS

LA

ST

DFS182DX/8 RH finishing cap installation DFSA180 + DFS05, 182 x 81 mm - th. 1 mm Brushed steel 1 Pc

DFS182SX/8 LH finishing cap installation DFSA180 + DFS05, 182 x 81 mm - th. 1 mm Brushed steel 1 Pc

DFS182DXAL/10 RH finishing cap installation DFSA180 + DFS05, 182 x 81 mm - th. 1 mm Raw-finish aluminium 1 Pc

DFS182DXAL/97 RH finishing cap installation DFSA180 + DFS05, 182 x 81 mm - th. 1 mm Matt aluminium 1 Pc

DFS182DXAL/88 RH finishing cap installation DFSA180 + DFS05, 182 x 81 mm - th. 1 mm Brushed steel-effect aluminium 1 Pc

DFS182SXAL/10 LH finishing cap installation DFSA180 + DFS05, 182 x 81 mm - th. 1 mm Raw-finish aluminium 1 Pc

DFS182SXAL/97 LH finishing cap installation DFSA180 + DFS05, 182 x 81 mm - th. 1 mm Matt aluminium 1 Pc

DFS182SXAL/88 LH finishing cap installation DFSA180 + DFS05, 182 x 81 mm - th. 1 mm Brushed steel-effect aluminium 1 Pc

DFCH Pressing device adjustment wrench 1 Pc

DFCH2 Combined wrench for pressing device adjustment, tilted by 22° 1 Pc

DFTAGLIO Calculation and tilted cut (22°-89°) 1 Pc

DF30 DEFENDER DF450 / DFS01 connecting dowels Aluminium 1 Pair

DFTEC88 Cover strip expandable cap for 17.5mm glass panes Black 1 Pc

DFTEC1010 Cover strip expandable cap for 21.5mm glass panes Black 1 Pc

DFA7230NF/10 Undrilled guide profile for point mounting of DF450, dim.72 x 9.5 L=3000mm Raw-finish aluminium 1 Pc

DFA7230NF/97 Undrilled guide profile for point mounting of DF450, dim.72 x 9.5 L=3000mm Matt aluminium 1 Pc

DFA7230NF/88 Undrilled guide profile for point mounting of DF450, dim.72 x 9.5 L=3000mm Brushed steel-effect aluminium 1 Pc

DFA7260NF/10 Undrilled guide profile for point mounting of DF450, dim.72 x 9.5 L=6000mm Raw-finish aluminium 1 Pc

DFA7260NF/97 Undrilled guide profile for point mounting of DF450, dim.72 x 9.5 L=6000mm Matt aluminium 1 Pc

DFA7230/10 Pre-drilled guide profile for DF450 floor fixing, dim. 72 x 9.5 L=3000mm Raw-finish aluminium 1 Pc

DFA7230/97 Pre-drilled guide profile for DF450 floor fixing, dim. 72 x 9.5 L=3000mm Matt aluminium 1 Pc

DFA7230/88 Pre-drilled guide profile for DF450 floor fixing, dim. 72 x 9.5 L=3000mm Brushed steel-effect aluminium 1 Pc

DFA7260/10 Pre-drilled guide profile for DF450 floor fixing, dim. 72 x 9.5 L=6000mm Raw-finish aluminium 1 Pc

DFA7260/97 Pre-drilled guide profile for DF450 floor fixing, dim. 72 x 9.5 L=6000mm Matt aluminium 1 Pc

DF45001NF/10 DEFENDER 45001NF profile for floor fixing on guide, Raw-finish aluminium 1 Pc

undrilled H 111.5 B 72 L 100 mm

DF45001/10 DEFENDER 45001 profile for floor fixing on guide, Raw-finish aluminium 1 Pc

pre-drilled H 111.5 B 72 L 100 mm

GLASS BALUSTRADE SYSTEMS – DEFENDER

Page 8

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 48/50 >>>

7,20

7,20

4,98

11,63

16,06

4,98

11,63

16,06

10,33

10,19

33,22

4,63

4,32

4,32

65,03

113,19

137,58

107,03

203,35

86,56

134,73

154,27

150,09

246,42

13,53

19,29

AS

LO

NG

AS

ST

OC

KS

LA

ST

-

A

S L

ON

G A

S S

TO

CK

S L

AS

T

-

AS

LO

NG

AS

ST

OC

KS

LA

ST

-

A

S L

ON

G A

S S

TO

CK

S L

AS

T

-

AS

LO

NG

AS

ST

OC

KS

LA

ST

GLASS BALUSTRADE SYSTEMS – DEFENDER

Page 9 >>> CATALOGUE REFERENCE PAGE 51/55 >>>

DEFENDER 450 FLOOR FIXING PROFILE, WITH WATER DRAIN SLOTS

▶DF450,60AS/97 DEFENDER 450 floor fixing profile, pre-drilled H 111.5 B 72 L 6000 mm Matt aluminium 1 Pc

▶DF450,60AS/10 DEFENDER 450 floor fixing profile, pre-drilled H 111.5 B 72 L 6000 mm Raw-finish aluminium 1 Pc

▶DF450,30AS/88 DEFENDER 450 floor fixing profile, pre-drilled H 111.5 B 72 L 3000 mm Brushed steel-effect aluminium 1 Pc

▶DF450,30AS/97 DEFENDER 450 floor fixing profile, pre-drilled H 111.5 B 72 L 3000 mm Matt aluminium 1 Pc

▶DF450,30AS/10 DEFENDER 450 floor fixing profile, pre-drilled H 111.5 B 72 L 3000 mm Raw-finish aluminium 1 Pc

▶DF450,15AS/88 DEFENDER 450 floor fixing profile, pre-drilled H 111.5 B 72 L 1498 mm Brushed steel-effect aluminium 1 Pc

▶DF450,15AS/97 DEFENDER 450 floor fixing profile, pre-drilled H 111.5 B 72 L 1498 mm Matt aluminium 1 Pc

▶DF450,15AS/10 DEFENDER 450 floor fixing profile, pre-drilled H 111.5 B 72 L 1498 mm Raw-finish aluminium 1 Pc

▶DF450FOROAS Additional slot for water drain DF450, diameter 8 x 20 mm 1 Pc

DFA72054/10 Pre-drilled water drain for DF450 floor fixing, dim. 72 x 9.5 L=540mm Raw-finish aluminium 1 Pc

DFA72054/97 Pre-drilled water drain for DF450 floor fixing, dim. 72 x 9.5 L=540mm Matt aluminium 1 Pc

DFA72054/88 Pre-drilled water drain for DF450 floor fixing, dim. 72 x 9.5 L=540mm Brushed steel-effect aluminium 1 Pc

DFA7230/10 Pre-drilled guide profile for DF450 floor fixing, dim. 72 x 9.5 L=3000mm Raw-finish aluminium 1 Pc

DFA7230/97 Pre-drilled guide profile for DF450 floor fixing, dim. 72 x 9.5 L=3000mm Matt aluminium 1 Pc

DFA7230/88 Pre-drilled guide profile for DF450 floor fixing, dim. 72 x 9.5 L=3000mm Brushed steel-effect aluminium 1 Pc

DFA7260/10 Pre-drilled guide profile for DF450 floor fixing, dim. 72 x 9.5 L=6000mm Raw-finish aluminium 1 Pc

DFA7260/97 Pre-drilled guide profile for DF450 floor fixing, dim. 72 x 9.5 L=6000mm Matt aluminium 1 Pc

DFSA180054/10 Pre-drilled water drain for DFS01 slab fixing, dim. 182 x 7 L=540mm Raw-finish aluminium 1 Pc

DFSA180054/97 Pre-drilled water drain for DFS01 slab fixing, dim. 182 x 7 L=540mm Matt aluminium 1 Pc

DFSA180054/88 Pre-drilled water drain for DFS01 slab fixing, dim. 182 x 7 L=540mm Brushed steel-effect aluminium 1 Pc

DFSA18030/10 Pre-drilled water drain for DFS01 slab fixing, dim. 182 x 7 L=3000mm Raw-finish aluminium 1 Pc

DFSA18030/97 Pre-drilled water drain for DFS01 slab fixing, dim. 182 x 7 L=3000mm Matt aluminium 1 Pc

DFSA18030/88 Pre-drilled water drain for DFS01 slab fixing, dim. 182 x 7 L=3000mm Brushed steel-effect aluminium 1 Pc

DFSA18060/10 Pre-drilled water drain for DFS01 slab fixing, dim. 182 x 7 L=6000mm Raw-finish aluminium 1 Pc

DFSA18060/97 Pre-drilled water drain for DFS01 slab fixing, dim. 182 x 7 L=6000mm Matt aluminium 1 Pc

DFSA121054/10 Pre-drilled water drain for DFS01+DFS07 slab installation, dim. 182 x 7 L=540mm Raw-finish aluminium 1 Pc

DFSA121054/97 Pre-drilled water drain for DFS01+DFS07 slab installation, dim. 182 x 7 L=540mm Matt aluminium 1 Pc

DFSA121054/88 Pre-drilled water drain for DFS01+DFS07 slab installation, dim. 182 x 7 L=540mm Brushed steel-effect aluminium 1 Pc

DFSA12130/10 Pre-drilled water drain for DFS01+DFS07 slab installation, dim. 182 x 7 L=3000mm Raw-finish aluminium 1 Pc

DFSA12130/97 Pre-drilled water drain for DFS01+DFS07 slab installation, dim. 182 x 7 L=3000mm Matt aluminium 1 Pc

DFSA12130/88 Pre-drilled water drain for DFS01+DFS07 slab installation, dim. 182 x 7 L=3000mm Brushed steel-effect aluminium 1 Pc

DFSA12160/10 Pre-drilled water drain for DFS01+DFS07 slab installation, dim. 182 x 7 L=6000mm Raw-finish aluminium 1 Pc

DFSA12160/97 Pre-drilled water drain for DFS01+DFS07 slab installation, dim. 182 x 7 L=6000mm Matt aluminium 1 Pc

DFGD Drainage grate Grey 1 Pc

DFGD/88 Drainage grate Stainless steel-effect 1 Pc

DFFH10ZN Kit 15 concrete anchors diameter 10mm for indoor use Galvanised steel 1 Set

DFFH10A4 Kit 15 concrete anchors diameter 10mm for outdoor use A4 1 Set

DFFH12ZN Kit 15 concrete anchors diameter 12mm for indoor use Galvanised steel 1 Set

DFFH12A4 Kit 15 concrete anchors diameter 12mm for outdoor use A4 1 Set

DFTASA4 Spit Guardia anchor for indoor and outdoor use A4 stainless steel 1 Pc

DFTAS Spit Guardia anchor for indoor use Zinc-electroplated steel 1 Pc

Art. Description Finish Q.ty EURO

1.651,99

1.232,06

900,26

848,10

638,14

473,75

452,65

347,67

55,36

18,77

30,05

33,92

86,56

134,73

154,27

150,09

246,42

33,14

61,73

45,87

162,59

258,22

236,43

302,14

504,93

31,20

36,08

53,08

124,40

151,23

194,07

225,77

279,43

11,96

11,96

40,80

158,93

79,57

208,95

19,19

6,24 C

B

Ø28 Ø15

B

C

A

AS

LO

NG

AS

ST

OC

KS

LA

ST

-

A

S L

ON

G A

S S

TO

CK

S L

AS

T

-

AS

LO

NG

AS

ST

OC

KS

LA

ST

-

A

S L

ON

G A

S S

TO

CK

S L

AS

T

-

AS

LO

NG

AS

ST

OC

KS

LA

ST

FITTINGS FOR BALUSTRADES WITH SLAB ANCHORING

SB200K/8 Bracket for balustrades series 200 kappa Brushed steel 1 Pc

with adjustable support spacer Ø 48 mm AISI 316

SB200K/15 Bracket for balustrades series 200 kappa Polished steel 1 Pc

with adjustable support spacer Ø 48 mm AISI 316

SB148/8 Bracket for balustrades series 148 with stud Ø 48 mm AISI 316 Brushed steel 1 Pc

SB148/15 Bracket for balustrades series 148 with stud Ø 48 mm AISI 316 Polished steel 1 Pc

POINT FIXINGS FOR BALUSTRADES WITH SPACER

EVODR304/9 Adjustable balustrade spacer for glass panes 17.52/25.52 mm AISI304 Machined steel (CNC) 1 Pc

EVODR316/9 Adjustable balustrade spacer for glass panes 17.52/25.52 mm AISI316 Machined steel (CNC) 1 Pc

EVODR304DIST/9 Fixed spacer for EVODR 10mm AISI304 Machined steel (CNC) 1 Pc

EVODR316DIST/9 Fixed spacer for EVODR 10mm AISI316 Machined steel (CNC) 1 Pc

EVODRG Set of grey gaskets for EVODR Grey 1 Set

DGM45B/88 Adjustable single-point alu. fitting with stud Ø45 mm, glass panes 17.52/25.52 mm Brushed steel-effect aluminium 1 Pc

DGM45B/97 Adjustable single-point alu. fitting with stud Ø45 mm, glass panes 17.52/25.52 mm Matt aluminium 1 Pc

DGM45B/10 Adjustable single-point alu. fitting with stud Ø45 mm, glass panes 17.52/25.52 mm Raw-finish aluminium 1 Pc

DGM45C/88 Adjustable single-point fitting with alu. cover Ø45 mm, glass panes 17.52/25.52 mm Brushed steel-effect aluminium 1 Pc

DGM45C/97 Adjustable single-point fitting with alu. cover Ø45 mm, glass panes 17.52/25.52 mm Matt aluminium 1 Pc

DGM45C/RAL Adjustable single-point fitting with alu. cover Ø45 mm, glass panes 17.52/25.52 mm RAL 9010 polished aluminium 1 Pc

DGM45C/R2 Adjustable single-point fitting with alu. cover Ø45 mm, glass panes 17.52/25.52 mm RAL9005 matt 1 Pc

DGM45C/10 Adjustable single-point fitting with alu. cover Ø45 mm, glass panes 17.52/25.52 mm Raw-finish aluminium 1 Pc

ATP60/15 Studded single-point fitting with adjustable support spacer Polished steel 1 Pc

Ø60 x 43/51 mm AISI 316

ATP60/8 Studded single-point fitting with adjustable support spacer Brushed steel 1 Pc

Ø60 x 43/51 mm AISI 316

SB40DR/15 SB40DR studded single-point fitting with adjustable support spacer Polished steel 1 Pc

Ø48 mm for 17.52/21.52 mm thick glass panes AISI 316

SB40DR/8 SB40DR studded single-point fitting with adjustable support spacer Brushed steel 1 Pc

Ø48 mm for 17.52/21.52 mm thick glass panes AISI 316

SB48DR/15 SB48DR studded single-point fitting with adjustable support spacer Polished steel 1 Pc

Ø48 mm for 21.52/25.52 mm thick glass panes AISI 316

SB48DR/8 SB48DR studded single-point fitting with adjustable support spacer Brushed steel 1 Pc

Ø48 mm for 21.52/25.52 mm thick glass panes AISI 316

SYSTEMS FOR GLASS BALUSTRADES

Page 10

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 60/74 >>>

380,67

399,51

300,66

310,11

68,43

79,83

18,32

21,98

5,05

61,55

52,66

40,51

72,33

63,77

64,46

64,46

47,35

133,67

130,18

95,41

87,63

97,95

90,49

SYSTEMS FOR GLASS BALUSTRADES

Page 11 >>> CATALOGUE REFERENCE PAGE 75/83 >>>

SB-BORK/15 Ø48 mm stud with 4 blind holes, for SB148 and SB248, AISI 316 Polished steel 1 Pc

SB-BORK/8 Ø48 mm stud with 4 blind holes, for SB148 and SB248, AISI 316 Brushed steel 1 Pc

ATP50/9 Studded single-point fitting with adjustable support spacer Machined steel (CNC) 1 Pc

Ø50 x 42/50 mm AISI 304

ATP515/9 Single-point fitting with Ø50 mm stud wall distance 1.5 mm AISI 304 Machined steel (CNC) 1 Pc

ATP565/9 Single-point fitting with Ø50 mm stud wall distance 6.5 mm AISI 304 Machined steel (CNC) 1 Pc

ATP5215/9 Single-point fitting with Ø50 mm stud wall distance 21.5 mm AISI 304 Machined steel (CNC) 1 Pc

ATP5365/9 Single-point fitting with Ø50 mm stud wall distance 36.5 mm AISI 304 Machined steel (CNC) 1 Pc

ATP50315/9 Single-point fitting with Ø50 mm stud with neck wall distance 1.5 mm AISI 304 Machined steel (CNC) 1 Pc

ATP50365/9 Single-point fitting with Ø50 mm stud with neck wall distance 6.5 mm AISI 304 Machined steel (CNC) 1 Pc

ATP503215/9 Single-point fitting with Ø50 mm stud with neck wall distance 21.5 mm AISI 304 Machined steel (CNC) 1 Pc

ATP503365/9 Single-point fitting with Ø50 mm stud with neck wall distance 36.5 mm AISI 304 Machined steel (CNC) 1 Pc

ATP415/9 Countersunk single-point fitting Ø 45 mm wall distance 1.5 mm AISI 304 Machined steel (CNC) 1 Pc

ATP465/9 Countersunk single-point fitting Ø 45 mm wall distance 6.5 mm AISI 304 Machined steel (CNC) 1 Pc

ATP4215/9 Countersunk single-point fitting Ø 45 mm wall distance 21.5 mm AISI 304 Machined steel (CNC) 1 Pc

ATP4365/9 Countersunk single-point fitting Ø 45 mm wall distance 36.5 mm AISI 304 Machined steel (CNC) 1 Pc

ATP45315/9 Countersunk single-point fitting Ø 45 mm with neck wall distance 1.5 mm AISI 304 Machined steel (CNC) 1 Pc

ATP45365/9 Countersunk single-point fitting Ø 45 mm with neck wall distance 6.5 mm AISI 304 Machined steel (CNC) 1 Pc

ATP453215/9 Countersunk single-point fitting Ø 45 mm with neck wall distance 21.5 mm AISI 304 Machined steel (CNC) 1 Pc

ATP453365/9 Countersunk single-point fitting Ø 45 mm with neck wall distance 36.5 mm AISI 304 Machined steel (CNC) 1 Pc

ATP452/5 White PVC spacer thickness 4 mm hole Ø24 mm White 1 Pc

ATP453/5 White PVC spacer thickness 4 mm hole Ø 30.2 mm White 1 Pc

SPACERS

COFIS45B/9 Fixing connector 45 PVC white Machined steel (CNC) 1 Pc

DISTCOFIS11/9 Supporting spacer Ø 50 x 20 mm M14 AISI 304 Machined steel (CNC) 1 Pc

DISTCOFIS12/9 Supporting spacer Ø 50 x 35 mm M14 AISI 304 Machined steel (CNC) 1 Pc

DISTCOFISR/9 Adjustable supporting spacer Ø 50 x 40/48 mm M14 AISI 304 Machined steel (CNC) 1 Pc

DISTB50/9 Cylindrical spacer with neck and holding stud Ø 50 x 41 mm AISI 304 Machined steel (CNC) 1 Pc

DISTB40/9 Cylindrical spacer with neck and holding stud Ø40 x 41 mm AISI 304 Machined steel (CNC) 1 Pc

DISTB30/9 Cylindrical spacer with neck and holding stud Ø 30 x 31 mm AISI 304 Machined steel (CNC) 1 Pc

MDMAC52/9 MDMAC52 spacer without neck Ø 35 x 40 mm M10 AISI 304 Machined steel (CNC) 1 Pc

Art. Description Finish Q.ty EURO35,09

33,23

98,03

31,20

42,19

57,06

70,72

40,63

51,62

66,50

80,16

45,27

56,26

71,14

84,79

42,74

53,73

68,61

82,27

7,98

7,98

31,96

28,45

43,48

63,14

67,40

47,85

36,24

40,45

MAW50/15 MAW50 spacer without neck Ø 47 x 30 mm Polished steel 1 Pc

MAW50/8 MAW50 spacer without neck Ø 47 x 30 mm Brushed steel 1 Pc

SERIES ATT AISI 304/316 UPRIGHTS AND SINGLE-POINT FIXINGS

MQ504-AISI304/8 Low square upright 50 x 50 mm X H 830 for ATT AISI 304 in line M6 x 4 Brushed steel 1 Pc

MQ504-AISI304/15 Low square upright 50 x 50 mm X H 830 for ATT AISI 304 in line M6 x 4 Polished steel 1 Pc

MQ508-AISI304/8 Low square upright 50 x 50 mm X H 830 for ATT AISI 304 90° M6 x 8 Brushed steel 1 Pc

MQ508-AISI304/15 Low square upright 50 x 50 mm X H 830 for ATT AISI 304 90° M6 x 8 Polished steel 1 Pc

MQ504-AISI316/8 Low square upright 50 x 50 mm X H 830 for ATT AISI 316 in line M8 x 4 Brushed steel 1 Pc

MQ504-AISI316/15 Low square upright 50 x 50 mm X H 830 for ATT AISI 316 in line M8 x 4 Polished steel 1 Pc

MQ508-AISI316/8 Low square upright 50 x 50 mm X H 830 for ATT AISI 316 90° M8 x 8 Brushed steel 1 Pc

MQ508-AISI316/15 Low square upright 50 x 50 mm X H 830 for ATT AISI 316 90° M8 x 8 Polished steel 1 Pc

MONCH16 Socket wrench for tightening upright M16 nuts 1 Pc

SERIES ATT AISI 304 POINT FIXINGS

ATT10/8 Single-point floor-wall/glass fixing H 60 x 40 mm AISI 304 Brushed steel 1 Pc

ATT10/15 Single-point floor-wall/glass fixing H 60 x 40 mm AISI 304 Polished steel 1 Pc

ATT20/8 Single point fixing for anchoring on flat profile H 70 x 40 mm AISI 304 Brushed steel 1 Pc

ATT20/15 Single point fixing for anchoring on flat profile H 70 x 40 mm AISI 304 Polished steel 1 Pc

ATT15/8 Two-point in line fixing for anchoring on flat profile H 120 x 40 mm AISI 304 Brushed steel 1 Pc

ATT15/15 Two-point in line fixing for anchoring on flat profile H 120 x 40 mm AISI 304 Polished steel 1 Pc

FIXBORK1/9 Fixbork Ø35 mm x M8 AISI 304 Machined steel (CNC) 1 Pc

FIXGHIERA8/9 Ring nut Ø30 mm x M8 AISI 304 Machined steel (CNC) 1 Pc

SERIES ATT AISI 316 POINT FIXINGS

ATT40/8 Single-point floor-wall/glass fixing H 80 x 50 mm AISI 316 Brushed steel 1 Pc

ATT40/15 Single-point floor-wall/glass fixing H 80 x 50 mm AISI 316 Polished steel 1 Pc

ATT50/8 Single point fixing for anchoring on flat profile H 91 x 50 mm AISI 316 Brushed steel 1 Pc

ATT50/15 Single point fixing for anchoring on flat profile H 91 x 50 mm AISI 316 Polished steel 1 Pc

ATT45/8 Two-point in line fixing for anchoring on flat profile H 160 x 50 mm AISI 316 Brushed steel 1 Pc

ATT45/15 Two-point in line fixing for anchoring on flat profile H 160 x 50 mm AISI 316 Polished steel 1 Pc

SYSTEMS FOR GLASS BALUSTRADES

Page 12

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 84/93 >>>

43,89

41,15

195,64

271,63

215,71

291,70

230,77

306,76

250,84

326,83

109,48

23,62

25,05

22,87

24,30

37,24

39,18

21,98

6,11

48,85

50,95

48,93

51,37

74,40

78,78

SYSTEMS FOR GLASS BALUSTRADES

Page 13 >>> CATALOGUE REFERENCE PAGE 94/97 >>>

FIXBORK40/9 Fixbork Ø 40 mm x M10 AISI 316 Machined steel (CNC) 1 Pc

FIXGHIERA40/9 Ring nut Ø 40 mm x M10 AISI 316 Machined steel (CNC) 1 Pc

PVTB/9 Studded fixing connector AISI 316 Machined steel (CNC) 1 Pc

PVTS/9 Countersunk fixing connector AISI 316 Machined steel (CNC) 1 Pc

UPRIGHTS FOR CLAMPS

MQ602-AISI316/8 Low square upright 50 x 50 mm X H 970 for MGSR AISI 316 single M8 x 2 Brushed steel 1 Pc

MQ602-AISI316/15 Low square upright 50 x 50 mm X H 970 for MGSR AISI 316 single M8 x 2 Polished steel 1 Pc

MQ60490-316/8 Low square upright 50 x 50 mm X H 970 for MGSR AISI 316 90° M8 x 4 Brushed steel 1 Pc

MQ60490-316/15 Low square upright 50 x 50 mm X H 970 for MGSR AISI 316 90° M8 x 4 Polished steel 1 Pc

MQ606LIN-316/8 Low square upright 50 x 50 mm X H 970 for MGSR AISI 316 in line M8 x 4 Brushed steel 1 Pc

MQ606LIN-316/15 Low square upright 50 x 50 mm X H 970 for MGSR AISI 316 in line M8 x 4 Polished steel 1 Pc

MQ702-AISI316/8 Low square upright 50 x 50 mm X H 970 for MGSR AISI 316 single M10 x 2 Brushed steel 1 Pc

MQ702-AISI316/15 Low square upright 50 x 50 mm X H 970 for MGSR AISI 316 single M10 x 2 Polished steel 1 Pc

MQ70490-316/8 Low square upright 50 x 50 mm X H 970 for MGSR AISI 316 90° M10 x 4 Brushed steel 1 Pc

MQ70490-316/15 Low square upright 50 x 50 mm X H 970 for MGSR AISI 316 90° M10 x 4 Polished steel 1 Pc

MQ706LIN-316/8 Low square upright 50 x 50 mm X H 970 for MGSR AISI 316 in line M10 x 4 Brushed steel 1 Pc

MQ706LIN-316/15 Low square upright 50 x 50 mm X H 970 for MGSR AISI 316 in line M10 x 4 Polished steel 1 Pc

MONCH16 Socket wrench for tightening upright M16 nuts 1 Pc

CARRÉ SERIES CLAMPS

MGSR31/15 Carré series clamp in AISI 316 steel glass 8+8/10+10, Polished steel 1 Pc

dimensions H 65 x L 65 mm

MGSR31/8 Carré series clamp in AISI 316 steel glass 8+8/10+10, Brushed steel 1 Pc

dimensions H 65 x L 65 mm

MGSR33/15 Carré series clamp in AISI 316 steel for Ø 50 mm tubular sections glass 8+8/10+10, Polished steel 1 Pc

dimensions H 74 x L 65 x R 25 mm

MGSR33/8 Carré series clamp in AISI 316 steel for Ø 50 mm tubular sections glass 8+8/10+10, Brushed steel 1 Pc

dimensions H 74 x L 65 x R 25 mm

MGSR11/15 Carré series clamp in AISI 316 steel glass 8/10/5+5/6+6, Polished steel 1 Pc

dimensions H 55 x L 55 mm

MGSR11/8 Carré series clamp in AISI 316 steel glass 8/10/5+5/6+6, Brushed steel 1 Pc

dimensions H 55 x L 55 mm

Art. Description Finish Q.ty EURO32,20

11,43

36,24

36,24

225,75

301,74

235,78

311,77

235,78

311,77

225,75

301,74

235,78

311,77

235,78

311,77

109,48

65,40

60,17

68,16

66,12

46,36

43,24

MGSR13/15 Carré series clamp in AISI 316 steel for Ø 42 mm tubular sections Polished steel 1 Pc

glass 8/10/5+5/6+6, dimensions H 62 x L 55 mm

MGSR13/8 Carré series clamp in AISI 316 steel for Ø 42 mm tubular sections Brushed steel 1 Pc

glass 8/10/5+5/6+6, dimensions H 62 x L 55 mm

MGSR01/15 Carré series clamp in AISI 316 steel glass 6/8/10, Polished steel 1 Pc

dimensions H 45 x L 45 mm

MGSR01/8 Carré series clamp in AISI 316 steel glass 6/8/10, Brushed steel 1 Pc

dimensions H 45 x L 45 mm

MGSR03/15 Carré series clamp in AISI 316 steel for Ø 42 tubular sections Polished steel 1 Pc

glass 6/8/10, dimensions H 51 x L 45 x R 21 mm

MGSR03/8 Carré series clamp in AISI 316 steel for Ø 42 tubular sections Brushed steel 1 Pc

glass 6/8/10, dimensions H 51 x L 45 x R 21 mm

BALLON SERIES CLAMPS

MGS21/15 Ballon series clamp in AISI 316 steel glass 8+8/10+10, Polished steel 1 Pc

dimensions H 70 x L 60 mm

MGS21/8 Ballon series clamp in AISI 316 steel glass 8+8/10+10, Brushed steel 1 Pc

dimensions H 70 x L 60 mm

MGS23/15 Ballon series clamp in AISI 316 steel for Ø 50 mm tubular sections Polished steel 1 Pc

glass 8+8/10+10, dimensions H 82 x L 60 x R 25 mm

MGS23/8 Ballon series clamp in AISI 316 steel for Ø 50 mm tubular sections Brushed steel 1 Pc

glass 8+8/10+10, dimensions H 82 x L 60 x R 25 mm

MS1207/15 AISI 316 steel clamp 6/12.76 glass, dimensions H 63 x L 45 mm Polished steel 1 Pc

MS1207/8 AISI 316 steel clamp 6/12.76 glass, dimensions H 63 x L 45 mm Brushed steel 1 Pc

MS1250/15 Closed clamp AISI 316 steel glass 6/12.76 dimensions H 63 x L 45 mm Polished steel 1 Pc

MS1250/8 Closed clamp AISI 316 steel glass 6/12.76 dimensions H 63 x L 45 mm Brushed steel 1 Pc

MS1208/15 Bevelled clamp AISI 316 steel glass 6/12.76, Polished steel 1 Pc

dimensions H 63 x L 45 x R 21.2 mm

MS1208/8 Bevelled clamp AISI 316 steel glass 6/12.76, Brushed steel 1 Pc

dimensions H 63 x L 45 x R 21.2 mm

SYSTEMS FOR GLASS BALUSTRADES

Page 14

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 98/101 >>>

48,22

46,30

28,88

26,84

29,30

27,38

55,43

53,39

56,27

54,23

24,48

21,70

36,15

33,93

24,93

21,88

SYSTEMS FOR GLASS BALUSTRADES

Page 15 >>> CATALOGUE REFERENCE PAGE 103/105 >>>

ROUND STRUCTURAL HANDRAIL SUPPLIED WITH FIXING ACCESSORIES

▶CORLM1760C/97 Kit for round structural handrail 41 x 43 mm L 6000 mm, for 17.52 mm glass Matt aluminium 1 Kit

▶CORLM1760C/10 Kit for round structural handrail 41 x 43 mm L 6000 mm, for 17.52 mm glass Raw-finish aluminium 1 Kit

▶CORLM1730C/88 Kit for round structural handrail 41 x 43 mm L 3000 mm, for 17.52 mm glass Brushed steel-effect aluminium 1 Kit

▶CORLM1730C/97 Kit for round structural handrail 41 x 43 mm L 3000 mm, for 17.52 mm glass Matt aluminium 1 Kit

▶CORLM1730C/10 Kit for round structural handrail 41 x 43 mm L 3000 mm, for 17.52 mm glass Raw-finish aluminium 1 Kit

▶CORLM2160C/97 Kit for round structural handrail 41 x 47 mm L 6000 mm, for 21.52 mm glass Matt aluminium 1 Kit

▶CORLM2160C/10 Kit for round structural handrail 41 x 47 mm L 6000 mm, for 21.52 mm glass Raw-finish aluminium 1 Kit

▶CORLM2130C/88 Kit for round structural handrail 41 x 47 mm L 3000 mm, for 21.52 mm glass Brushed steel-effect aluminium 1 Kit

▶CORLM2130C/97 Kit for round structural handrail 41 x 47 mm L 3000 mm, for 21.52 mm glass Matt aluminium 1 Kit

▶CORLM2130C/10 Kit for round structural handrail 41 x 47 mm L 3000 mm, for 21.52 mm glass Raw-finish aluminium 1 Kit

SQUARE STRUCTURAL HANDRAIL SUPPLIED WITH FIXING ACCESSORIES

▶CORLM1760S/97 Kit for square structural handrail 41 x 43 mm L 6000 mm, for 17.52 mm glass Matt aluminium 1 Kit

▶CORLM1760S/10 Kit for square structural handrail 41 x 43 mm L 6000 mm, for 17.52 mm glass Raw-finish aluminium 1 Kit

▶CORLM1730S/88 Kit for square structural handrail 41 x 43 mm L 3000 mm, for 17.52 mm glass Brushed steel-effect aluminium 1 Kit

▶CORLM1730S/97 Kit for square structural handrail 41 x 43 mm L 3000 mm, for 17.52 mm glass Matt aluminium 1 Kit

▶CORLM1730S/10 Kit for square structural handrail 41 x 43 mm L 3000 mm, for 17.52 mm glass Raw-finish aluminium 1 Kit

▶CORLM2160S/97 Kit for square structural handrail 41 x 47 mm L 6000 mm, for 21.52 mm glass Matt aluminium 1 Kit

▶CORLM2160S/10 Kit for square structural handrail 41 x 47 mm L 6000 mm, for 21.52 mm glass Raw-finish aluminium 1 Kit

▶CORLM2130S/88 Kit for square structural handrail 41 x 47 mm L 3000 mm, for 21.52 mm glass Brushed steel-effect aluminium 1 Kit

▶CORLM2130S/97 Kit for square structural handrail 41 x 47 mm L 3000 mm, for 21.52 mm glass Matt aluminium 1 Kit

▶CORLM2130S/10 Kit for square structural handrail 41 x 47 mm L 3000 mm, for 21.52 mm glass Raw-finish aluminium 1 Kit

STRUCTURAL HANDRAIL ACCESSORIES

BEVELLED PROFILE FOR ROUND STRUCTURAL HANDRAIL

▶CORLM01/97 Round structural profile 41 x 43 mm L 6000 mm, for 17.52 mm glass Matt aluminium 1 Pc

▶CORLM01/10 Round structural profile 41 x 43 mm L 6000 mm, for 17.52 mm glass Raw-finish aluminium 1 Pc

▶CORLM03/88 Round structural profile 41 x 43 mm L 3000 mm, for 17.52 mm glass Brushed steel-effect aluminium 1 Pc

▶CORLM03/97 Round structural profile 41 x 43 mm L 3000 mm, for 17.52 mm glass Matt aluminium 1 Pc

▶CORLM03/10 Round structural profile 41 x 43 mm L 3000 mm, for 17.52 mm glass Raw-finish aluminium 1 Pc

▶CORLM05/97 Round structural profile 41 x 47 mm L 6000 mm, for 21.52 mm glass Matt aluminium 1 Pc

▶CORLM05/10 Round structural profile 41 x 47 mm L 6000 mm, for 21.52 mm glass Raw-finish aluminium 1 Pc

▶CORLM07/88 Round structural profile 41 x 47 mm L 3000 mm, for 21.52 mm glass Brushed steel-effect aluminium 1 Pc

▶CORLM07/97 Round structural profile 41 x 47 mm L 3000 mm, for 21.52 mm glass Matt aluminium 1 Pc

▶CORLM07/10 Round structural profile 41 x 47 mm L 3000 mm, for 21.52 mm glass Raw-finish aluminium 1 Pc

PROFILE FOR SQUARE STRUCTURAL HANDRAIL

▶CORLM09/97 Square structural profile 41 x 43 mm L 6000 mm, for 17.52 mm glass Matt aluminium 1 Pc

▶CORLM09/10 Square structural profile 41 x 43 mm L 6000 mm, for 17.52 mm glass Raw-finish aluminium 1 Pc

▶CORLM11/88 Square structural profile 41 x 43 mm L 3000 mm, for 17.52 mm glass Brushed steel-effect aluminium 1 Pc

▶CORLM11/97 Square structural profile 41 x 43 mm L 3000 mm, for 17.52 mm glass Matt aluminium 1 Pc

▶CORLM11/10 Square structural profile 41 x 43 mm L 3000 mm, for 17.52 mm glass Raw-finish aluminium 1 Pc

▶CORLM13/97 Square structural profile 41 x 47 mm L 6000 mm, for 21.52 mm glass Matt aluminium 1 Pc

▶CORLM13/10 Square structural profile 41 x 47 mm L 6000 mm, for 21.52 mm glass Raw-finish aluminium 1 Pc

▶CORLM15/88 Square structural profile 41 x 47 mm L 3000 mm, for 21.52 mm glass Brushed steel-effect aluminium 1 Pc

▶CORLM15/97 Square structural profile 41 x 47 mm L 3000 mm, for 21.52 mm glass Matt aluminium 1 Pc

▶CORLM15/10 Square structural profile 41 x 47 mm L 3000 mm, for 21.52 mm glass Raw-finish aluminium 1 Pc

Art. Description Finish Q.ty EURO

441,14

297,46

239,97

231,97

160,13

471,20

314,53

248,50

247,00

168,67

499,54

330,62

256,55

261,17

176,71

529,98

347,90

265,19

276,40

185,36

332,41

188,73

185,60

177,61

105,77

362,47

205,80

194,14

192,64

114,30

390,81

221,89

202,18

206,81

122,35

421,25

239,17

210,82

222,03

130,99

CORLM17/88 Closed cap for round handrail profile 41 x 43 mm, for 17.52 mm glass Brushed steel-effect aluminium 1 Pc

CORLM17/97 Closed cap for round handrail profile 41 x 43 mm, for 17.52 mm glass Matt aluminium 1 Pc

CORLM17/10 Closed cap for round handrail profile 41 x 43 mm, for 17.52 mm glass Raw-finish aluminium 1 Pc

CORLM19/88 Closed cap for round handrail profile 41 x 47 mm, for 21.52 mm glass Brushed steel-effect aluminium 1 Pc

CORLM19/97 Closed cap for round handrail profile 41 x 47 mm, for 21.52 mm glass Matt aluminium 1 Pc

CORLM19/10 Closed cap for round handrail profile 41 x 47 mm, for 21.52 mm glass Raw-finish aluminium 1 Pc

CORLM21/88 Closed cap for square handrail profile 41 x 43 mm, for 17.52 mm glass Brushed steel-effect aluminium 1 Pc

CORLM21/97 Closed cap for square handrail profile 41 x 43 mm, for 17.52 mm glass Matt aluminium 1 Pc

CORLM21/10 Closed cap for square handrail profile 41 x 43 mm, for 17.52 mm glass Raw-finish aluminium 1 Pc

CORLM23/88 Closed cap for square handrail profile 41 x 47 mm, for 21.52 mm glass Brushed steel-effect aluminium 1 Pc

CORLM23/97 Closed cap for square handrail profile 41 x 47 mm, for 21.52 mm glass Matt aluminium 1 Pc

CORLM23/10 Closed cap for square handrail profile 41 x 47 mm, for 21.52 mm glass Raw-finish aluminium 1 Pc

CORLM25/88 Open cap for round handrail profile 41 x 43 mm, for 17.52 mm glass Brushed steel-effect aluminium 1 Pc

CORLM25/97 Open cap for round handrail profile 41 x 43 mm, for 17.52 mm glass Matt aluminium 1 Pc

CORLM25/10 Open cap for round handrail profile 41 x 43 mm, for 17.52 mm glass Raw-finish aluminium 1 Pc

CORLM27/88 Open cap for round handrail profile 41 x 47 mm, for 21.52 mm glass Brushed steel-effect aluminium 1 Pc

CORLM27/97 Open cap for round handrail profile 41 x 47 mm, for 21.52 mm glass Matt aluminium 1 Pc

CORLM27/10 Open cap for round handrail profile 41 x 47 mm, for 21.52 mm glass Raw-finish aluminium 1 Pc

CORLM29/88 Open cap for square handrail profile 41 x 43 mm, for 17.52 mm glass Brushed steel-effect aluminium 1 Pc

CORLM29/97 Open cap for square handrail profile 41 x 43 mm, for 17.52 mm glass Matt aluminium 1 Pc

CORLM29/10 Open cap for square handrail profile 41 x 43 mm, for 17.52 mm glass Raw-finish aluminium 1 Pc

CORLM31/88 Open cap for square handrail profile 41 x 47 mm, for 21.52 mm glass Brushed steel-effect aluminium 1 Pc

CORLM31/97 Open cap for square handrail profile 41 x 47 mm, for 21.52 mm glass Matt aluminium 1 Pc

CORLM31/10 Open cap for square handrail profile 41 x 47 mm, for 21.52 mm glass Raw-finish aluminium 1 Pc

CORLM33 Pressing device kit for clamping structural handrail 1 Kit

CORLM35 Bracket for 90° corner connection 1 Pc

CORLM37 Bracket for in-line connection 1 Pc

CORLM39 Wall anchor 1 Pc

CORLM41 Gasket for structural handrail Per m

GTUP4 Glass holder profile Transparent Per m

CORLM43 Kit with 4 self-tapping screws 1 Set

CORLM45 Tightening spanner for pressing devices 1 Pc

SYSTEMS FOR GLASS BALUSTRADES

Page 16

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 106/108 >>>

10,83

10,83

3,99

10,83

10,83

3,99

10,83

10,83

3,99

10,83

10,83

3,99

10,83

10,83

3,99

10,83

10,83

3,99

10,83

10,83

3,99

10,83

10,83

3,99

2,34

20,98

26,92

2,17

7,14

1,20

1,85

10,26

SYSTEMS FOR GLASS BALUSTRADES

Page 17 >>> CATALOGUE REFERENCE PAGE 110/112 >>>

SLOT HANDRAIL

▶CORF50/8 Slot handrail Ø 42.4 x L 3000 mm AISI 316 Brushed steel 1 Pc

CORFGM175 Gasket for glass edge for 17.52 thick glass panes Black 1 m

CORFGM215 Gasket for glass edge for 21.52 thick glass panes Black 1 m

CORF50357/8 In-line joint for slot handrail Ø 42.4 x 5 mm AISI 316 Brushed steel 1 Pc

CORF50359/8 90° Joint for slot handrail Ø 42.4 x 61x61 mm AISI 316 Brushed steel 1 Pc

CORF-UP25-55/8 Upward adjustable connector AISI 316, Brushed steel 1 Pc

with adjustable angle between 25° and 55°

CORF-DOW25-55/8 Downward adjustable connector AISI 316, Brushed steel 1 Pc

with adjustable angle between 25° and 55°

CORF50364/8 End cap for slot handrail Ø 42.4 x 5 mm AISI 316 Brushed steel 1 Pc

ROUND HANDRAILS

▶CORFT42316/8 Round tube for handrail Ø 42.4 x L 3000 mm AISI 316 Brushed steel 1 Pc

CORFGLT4101/8 Joint for tube handrail Ø 42.4 mm AISI 316 Brushed steel 1 Pc

CORFCR4140/8 Adjustable elbow for tube handrail Ø 42.4 mm AISI 316 Brushed steel 1 Pc

Art. Description Finish Q.ty EURO

168,04

10,36

6,27

19,55

30,58

45,82

46,77

13,61

175,04

9,91

43,97

CORF-52027/8 Corner joint for tube handrail for change of direction AISI 316 Brushed steel 1 Pc

CORFPP3110/8 Wall anchoring for tube handrail Ø 42.4 mm AISI 316 Brushed steel 1 Pc

CORFTT4301/8 End cap for tube handrail Ø 42.4 mm AISI 316 Brushed steel 1 Pc

CORFAV44106/8 Articulated glass fitting for tube handrail Ø 42.4 mm AISI 316 Brushed steel 1 Pc

CORFAM3075/8 Articulated wall fitting for tube handrail Ø 42.4 mm AISI 316 Brushed steel 1 Pc

STEEL FINISHING PROFILES

●CPR66/15 Finishing profile to be applied to the edge of the glass, Polished steel 1 Pc

L=2500mm, for 6+6+1.52mm glass panes

●CPR66/8 Finishing profile to be applied to the edge of the glass, Brushed steel 1 Pc

L=2500mm, for 6+6+1.52mm glass panes

●CPR88/15 Finishing profile to be applied to the edge of the glass, Polished steel 1 Pc

L=2500mm, for 8+8+1.52mm glass panes

●CPR88/8 Finishing profile to be applied to the edge of the glass, Brushed steel 1 Pc

L=2500mm, for 8+8+1.52mm glass panes

●CPR1010/15 Finishing profile to be applied to the edge of the glass, Polished steel 1 Pc

L=2500mm, for 10+10+1.52mm glass panes

●CPR1010/8 Finishing profile to be applied to the edge of the glass, Brushed steel 1 Pc

L=2500mm, for 10+10+1.52mm glass panes

SYSTEMS FOR GLASS BALUSTRADES

Page 18

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 112/114 >>>

35,57

21,73

6,05

29,02

22,18

57,21

57,21

60,22

60,22

62,95

62,95

SYSTEMS FOR GLASS BALUSTRADES

Page 19 >>> CATALOGUE REFERENCE PAGE 115/118 >>>

ALUMINIUM FINISHING PROFILES

●CPRAL88/88 Finishing profile to be applied to the edge of the glass, Brushed steel-effect aluminium 1 Pc

L=3000mm, for 8+8+1.52mm glass panes

●CPRAL88/97 Finishing profile to be applied to the edge of the glass, Matt aluminium 1 Pc

L=3000mm, for 8+8+1.52mm glass panes

●CPRAL88/RAL Finishing profile to be applied to the edge of the glass, RAL 9010 polished aluminium 1 Pc

L=3000mm, for 8+8+1.52mm glass panes

●CPRAL88/10 Finishing profile to be applied to the edge of the glass, Raw-finish aluminium 1 Pc

L=3000mm, for 8+8+1.52mm glass panes

●CPRAL1010/88 Finishing profile to be applied to the edge of the glass, Brushed steel-effect aluminium 1 Pc

L=3000mm, for 10+10+1.52mm glass panes

●CPRAL1010/97 Finishing profile to be applied to the edge of the glass, Matt aluminium 1 Pc

L=3000mm, for 10+10+1.52mm glass panes

●CPRAL1010/RAL Finishing profile to be applied to the edge of the glass, RAL 9010 polished aluminium 1 Pc

L=3000mm, for 10+10+1.52mm glass panes

●CPRAL1010/10 Finishing profile to be applied to the edge of the glass, Raw-finish aluminium 1 Pc

L=3000mm, for 10+10+1.52mm glass panes

CPRAL88TP/88 Finishing cap fo CPRAL88 profile 21.5 x 9 mm Brushed steel-effect aluminium 1 Pc

CPRAL88TP/97 Finishing cap fo CPRAL88 profile 21.5 x 9 mm Matt aluminium 1 Pc

CPRAL88TP/RAL Finishing cap fo CPRAL88 profile 21.5 x 9 mm RAL 9010 polished aluminium 1 Pc

CPRAL88TP/10 Finishing cap fo CPRAL88 profile 21.5 x 9 mm Raw-finish aluminium 1 Pc

CPRAL1010TP/88 Finishing cap for CPRAL1010 profile 25.5 x 9 mm Brushed steel-effect aluminium 1 Pc

CPRAL1010TP/97 Finishing cap for CPRAL1010 profile 25.5 x 9 mm Matt aluminium 1 Pc

CPRAL1010TP/RAL Finishing cap for CPRAL1010 profile 25.5 x 9 mm RAL 9010 polished aluminium 1 Pc

CPRAL1010TP/10 Finishing cap for CPRAL1010 profile 25.5 x 9 mm Raw-finish aluminium 1 Pc

GLASS HOLDERS FOR OUTDOORS - POOL STEEL GLASS HOLDER

POOL50C/15 POOL glass holder Ø 100/50 x H 160 mm Polished steel 1 Pc

POOL50C/8 POOL glass holder Ø 100/50 x H 160 mm Brushed steel 1 Pc

POOL50SQ/15 POOL SQ glass holder 100 x 100 H 160 mm Polished steel 1 Pc

POOL50SQ/8 POOL SQ glass holder 100 x 100 H 160 mm Brushed steel 1 Pc

STEEL GLASS HOLDER FOR OUTDOORS

MA402/15 MA402 trapeze glass holder for glass panes 15/21.5 mm H 75 x 50 mm Polished steel 1 Pc

MA402/8 MA402 trapeze glass holder for glass panes 15/21.5 mm H 75 x 50 mm Brushed steel 1 Pc

MA502/15 MA502 triangle glass holder for glass panes 15/21.5 mm H 64 x 81 mm Polished steel 1 Pc

MA502/8 MA502 triangle glass holder for glass panes 15/21.5 mm H 64 x 81 mm Brushed steel 1 Pc

Art. Description Finish Q.ty EURO

49,32

25,77

42,23

16,39

55,63

30,99

52,62

19,70

7,39

5,02

3,42

2,05

7,39

5,02

3,42

2,05

158,87

158,87

170,64

170,64

42,59

39,42

58,80

55,70

STEEL GLASS HOLDERS FOR OUTDOORS

MBLK90/15 AISI 316 steel 90° glass holder BLOK90 Polished steel 1 Pc

with or without glass cut-out 17/21.5 L 43.3+52+43.3 x H 50 mm

MBLK90/8 AISI 316 steel 90° glass holder BLOK90 Brushed steel 1 Pc

with or without glass cut-out 17/21.5 L 43.3+52+43.3 x H 50 mm

MBLK180/15 AISI 316 steel 180° glass holder BLOK180 Polished steel 1 Pc

with or without glass cut-out 17/21.5 L 100 x H 50 mm

MBLK180/8 AISI 316 steel 180° glass holder BLOK180 Brushed steel 1 Pc

with or without glass cut-out 17/21.5 L 100 x H 50 mm

LEDs FOR INDOORS

LED5050 5 metre reel with 60 SMD 5050 LEDs per metre, colour 4000K (white) 1 Pc

LED5050RGB 5 metre reel with 60 SMD 5050 LEDs per metre, colour RGB 1 Pc

LED2835CCT 5 metre reel with 120 SMD 2835 LEDs per metre, colour from 2700K to 6000K (white) 1 Pc

LEDCCT Control unit and remote control, dynamic white. 1 Pc

LED12030 Feeder 12Vdc 30W 1 Pc

LED12050 Feeder 12Vdc 50W 1 Pc

LED12075 Feeder 12Vdc 75W 1 Pc

LED24035IP Feeder 24Vdc 35W IP67 1 Pc

LED24050 Feeder 24Vdc 50W 1 Pc

LED24100 Feeder 24Vdc 100W 1 Pc

LEDs FOR OUTDOORS

LED352866 5 metre reel with 120 SMD 3528 LEDs per metre, colour 4000K (white) 1 Pc

LED505066 5 metre reel with 60 SMD 5050 LEDs per metre, colour 4000K (white) 1 Pc

LED5050RGB66 5 metre reel with 60 SMD 5050 LEDs per metre, colour RGB 1 Pc

LED12060IP Feeder 12Vdc 60W IP67 1 Pc

LED12100IP Feeder 12Vdc 100W IP67 1 Pc

LEDCRGB RGB control unit 1 Pc

SYSTEMS FOR GLASS BALUSTRADES

Page 20

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 119/125 >>>

85,51

80,95

79,81

74,22

139,50

156,06

162,59

169,61

52,19

81,79

82,80

61,22

76,78

146,03

136,49

163,59

180,15

69,25

112,40

65,23

SYSTEMS FOR OUTDOORS

Page 21 >>>> CATALOGUE REFERENCE PAGE 129/130 >>>

LA PENSILINA kit

▶PENKIT10/97 LA PENSILINA kit (canopy) for glass 88.2 or 88.4, length 1000mm Matt aluminium 1 Set

▶PENKIT10/88 LA PENSILINA kit (canopy) for glass 88.2 or 88.4, length 1000mm Brushed steel-effect aluminium 1 Set

▶PENKIT10/RAL LA PENSILINA kit (canopy) for glass 88.2 or 88.4, length 1000mm RAL9010 Polished aluminium 1 Set

▶PENKIT10/10 LA PENSILINA kit (canopy) for glass 88.2 or 88.4, length 1000mm Raw-finish aluminium 1 Set

▶PENKIT15/97 LA PENSILINA kit (canopy) for glass 88.2 or 88.4, length 1500mm Matt aluminium 1 Set

▶PENKIT15/88 LA PENSILINA kit (canopy) for glass 88.2 or 88.4, length 1500mm Brushed steel-effect aluminium 1 Set

▶PENKIT15/RAL LA PENSILINA kit (canopy) for glass 88.2 or 88.4, length 1500mm RAL9010 Polished aluminium 1 Set

▶PENKIT15/10 LA PENSILINA kit (canopy) for glass 88.2 or 88.4, length 1500mm Raw-finish aluminium 1 Set

▶PENKIT20/97 LA PENSILINA kit (canopy) for glass 88.2 or 88.4, length 2000mm Matt aluminium 1 Set

▶PENKIT20/88 LA PENSILINA kit (canopy) for glass 88.2 or 88.4, length 2000mm Brushed steel-effect aluminium 1 Set

▶PENKIT20/RAL LA PENSILINA kit (canopy) for glass 88.2 or 88.4, length 2000mm RAL9010 Polished aluminium 1 Set

▶PENKIT20/10 LA PENSILINA kit (canopy) for glass 88.2 or 88.4, length 2000mm Raw-finish aluminium 1 Set

▶PENKIT30/97 LA PENSILINA kit (canopy) for glass 88.2 or 88.4, length 3000mm Matt aluminium 1 Set

▶PENKIT30/88 LA PENSILINA kit (canopy) for glass 88.2 or 88.4, length 3000mm Brushed steel-effect aluminium 1 Set

▶PENKIT30/RAL LA PENSILINA kit (canopy) for glass 88.2 or 88.4, length 3000mm RAL9010 Polished aluminium 1 Set

▶PENKIT30/10 LA PENSILINA kit (canopy) for glass 88.2 or 88.4, length 3000mm Raw-finish aluminium 1 Set

LA PENSILINA EXTRUDED PROFILE, PRE-DRILLED,

INCLUDING GLASS STOP GASKET AND WALL GASKET

▶PEN10/97 LA PENSILINA extruded profile, length 1000mm Matt aluminium 1 Pc

▶PEN10/88 LA PENSILINA extruded profile, length 1000mm Brushed steel-effect aluminium 1 Pc

▶PEN10/RAL LA PENSILINA extruded profile, length 1000mm RAL9010 Polished aluminium 1 Pc

▶PEN10/10 LA PENSILINA extruded profile, length 1000mm Raw-finish aluminium 1 Pc

▶PEN15/97 LA PENSILINA extruded profile, length 1500mm Matt aluminium 1 Pc

▶PEN15/88 LA PENSILINA extruded profile, length 1500mm Brushed steel-effect aluminium 1 Pc

▶PEN15/RAL LA PENSILINA extruded profile, length 1500mm RAL9010 Polished aluminium 1 Pc

▶PEN15/10 LA PENSILINA extruded profile, length 1500mm Raw-finish aluminium 1 Pc

▶PEN20/97 LA PENSILINA extruded profile, length 2000mm Matt aluminium 1 Pc

▶PEN20/88 LA PENSILINA extruded profile, length 2000mm Brushed steel-effect aluminium 1 Pc

▶PEN20/RAL LA PENSILINA extruded profile, length 2000mm RAL9010 Polished aluminium 1 Pc

▶PEN20/10 LA PENSILINA extruded profile, length 2000mm Raw-finish aluminium 1 Pc

▶PEN30/97 LA PENSILINA extruded profile, length 3000mm Matt aluminium 1 Pc

▶PEN30/88 LA PENSILINA extruded profile, length 3000mm Brushed steel-effect aluminium 1 Pc

▶PEN30/RAL LA PENSILINA extruded profile, length 3000mm RAL9010 Polished aluminium 1 Pc

▶PEN30/10 LA PENSILINA extruded profile, length 3000mm Raw-finish aluminium 1 Pc

PENGRY Set of tightening accessories, 2 cams, 2 clamps and 2 screws Black 1 Kit

Art. Description Finish Q.ty EURO

269,15

291,96

291,96

241,78

403,73

437,94

437,94

362,67

538,30

583,92

583,92

483,56

807,45

875,88

875,88

725,34

220,79

244,74

229,46

214,07

355,14

391,98

376,13

334,84

489,26

540,92

520,97

455,84

764,46

840,87

818,74

697,28

12,37

PENT01/97 Pair of end caps without holes for LA PENSILINA profile Matt aluminium 1 Pair

PENT01/88 Pair of end caps without holes for LA PENSILINA profile Brushed steel-effect aluminium 1 Pair

PENT01/RAL Pair of end caps without holes for LA PENSILINA profile RAL9010 Polished aluminium 1 Pair

PENT01/10 Pair of end caps without holes for LA PENSILINA profile Raw-finish aluminium 1 Pair

PENT03/97 Kit composed of a pair of screw-on caps for LA PENSILINA profile Matt aluminium 1 Set

PENT03/88 Kit composed of a pair of screw-on caps for LA PENSILINA profile Brushed steel-effect aluminium 1 Set

PENT03/RAL Kit composed of a pair of screw-on caps for LA PENSILINA profile RAL9010 Polished aluminium 1 Set

PENT03/10 Kit composed of a pair of screw-on caps for LA PENSILINA profile Raw-finish aluminium 1 Set

PENT05/97 Pair of open end caps without holes for LA PENSILINA profile Matt aluminium 1 Pair

PENT05/88 Pair of open end caps without holes for LA PENSILINA profile Brushed steel-effect aluminium 1 Pair

PENT05/RAL Pair of open end caps without holes for LA PENSILINA profile RAL9010 Polished aluminium 1 Pair

PENT05/10 Pair of open end caps without holes for LA PENSILINA profile Raw-finish aluminium 1 Pair

PENCH 8 mm hex key for PENSILINA locking cam. 1 Pc

PENTAGLIO Custom cutting for LA PENSILINA kit 1 Pc

SYSTEMS FOR OUTDOORS

Page 22

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 130/131 >>>

37,28

37,77

50,72

16,79

54,29

54,63

65,69

37,52

54,29

54,63

65,69

37,52

4,11

31,93

SYSTEMS FOR OUTDOORS

Page 23 >>>> CATALOGUE REFERENCE PAGE 139/143 >>>

SYSTEM FOR GLASS CANOPIES - Canopy Light

GCL21/9 Pensilina Canopy Light – articulated wall joint Machined steel (CNC) 1 Pc

GCL15/9 Pensilina Canopy Light – articulated stud Machined steel (CNC) 1 Pc

GCL23/8 Pensilina Canopy Light – tie rod Brushed steel 1 Pc

GCL19/9 Pensilina Canopy Light – wall-mounted connector Machined steel (CNC) 1 Pc

SYSTEM FOR GLASS CANOPIES - Canopy Light - KIT

GC-SNOD15 Tie rod with studs Ø 45 and cable max L =1500 mm Machined steel (CNC) 1 Set

GC-CAV15 Tie rod with studs Ø 45 and with wall fitting cable max L =1500 mm Machined steel (CNC) 1 Set

Art. Description Finish Q.ty EURO

79,93

87,93

91,38

111,91

259,24

371,15

SYSTEM FOR GLASS CANOPIES - GLASS CANOPY

GC-ROT145/9 45° articulated rotule joint Ø55xM14 - AISI 316L Machined steel (CNC) 1 Pc

GC-ROT101/9 Articulated rotule joint Ø55xM14 - AISI 316L Machined steel (CNC) 1 Pc

GC-PEROUT162/9 Wall-mounted connector Ø30x120 mm with studded rotule joints Machined steel (CNC) 1 Pc

GC-PERN120/9 Wall-mounted connector Ø30x120 mm - AISI 316L Machined steel (CNC) 1 Pc

GC-SNOD143/9 Articulated wall joint Ø30x43 mm - AISI 316L Machined steel (CNC) 1 Pc

GC-CAV100/9 Tie rod Ø10 - AISI 316L Lmax=1500mm Machined steel (CNC) 1 Pc

GC-CAV300/9 Tie rod Ø10 - AISI 316L Lmax=3000mm Machined steel (CNC) 1 Pc

GC-TEND130/9 Tensioner Ø30 mm - AISI 316L Machined steel (CNC) 1 Pc

GC-GZT130/9 Joint for tie rods Ø30 mm - AISI 316L Machined steel (CNC) 1 Pc

GC-PERN270/9 Connecting pin Ø30x270 mm - AISI 316L Machined steel (CNC) 1 Pc

SYSTEMS FOR OUTDOORS

Page 24

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 146/148 >>>

186,19

153,55

301,92

148,36

190,64

147,63

207,45

76,41

128,85

197,45

Art. Description Finish Q.ty EURO TIE ROD WITH STUD

GC-SNOD1100 Tie rod with studs Ø 55 and cable max L =1500 mm Machined steel (CNC) 1 Set

GC-SNOD1300 Tie rod with studs Ø 55 and cable max L =3000 mm Machined steel (CNC) 1 Set

TIE ROD WITH STUD AND WALL CONNECTOR

GC-CAV1100 Tie rod with studs Ø 55 and wall connector, Machined steel (CNC) 1 Set

cable L max=1500 mm

GC-CAV1300 Tie rod with studs Ø 55 and wall connector, Machined steel (CNC) 1 Set

cable L max=3000 mm

TIE ROD WITH CONNECTION PIN

GC-PERN155 Tie rod with connection pin, studs Ø 55 Machined steel (CNC) 1 Set

and cable L max=1500 mm

GC-PERN355 Tie rod with connection pin, studs Ø 55 Machined steel (CNC) 1 Set

and cable L max=3000 mm

TIE ROD WITH CONNECTION PIN AND WALL FITTINGS

GC-PEROUT155 Tie rod with connection pin and wall fittings Machined steel (CNC) 1 Set

with studs Ø 55 and cable max L =1500 mm

GC-PEROUT355 Tie rod with connection pin and wall fittings Machined steel (CNC) 1 Set

with studs Ø 55 and cable max L =3000 mm

SYSTEMS FOR OUTDOORS

Page 25 >>> CATALOGUE REFERENCE PAGE 149 >>>

600,88

660,69

902,79

962,61

984,52

1.044,34

1.588,35

1.707,98

FLUIDO CLAMP FAÇADE SYSTEM

FCLAMP4/8 4-way spider for anchoring laminated glass panes with no drilling, Brushed steel 1 Pc

for glass thickness from 13.52mm to 21.52mm

FCLAMP1/8 1-way spider for anchoring laminated glass panes with no drilling, Brushed steel 1 Pc

for glass thickness from 13.52mm to 21.52mm

FCLAMP7/8 Fitting for anchoring double glazing panels without drilling, Brushed steel 1 Pc

for double glazing glass thickness from 37 mm to 55 mm

FLUIDO

FLUIDO360/8 4-way spider for connecting 4 rotule joints to the load bearing structure Brushed steel 1 Pc

FLUIDO270/8 3-way spider for connecting 3 rotule joints to the load bearing structure Brushed steel 1 Pc

FLUIDO90/8 2-way 90° spider for connecting 2 rotule joints to the load bearing structure Brushed steel 1 Pc

FLUIDO180/8 2-way in-line spider for connecting 2 rotule joints to the load bearing structure Brushed steel 1 Pc

FLUIDO100/8 1-way in-line spider for connecting 1 rotule joint to the load bearing structure Brushed steel 1 Pc

FLUIDO45/8 1-way 45° spider for connecting 1 rotule joint to the load bearing structure Brushed steel 1 Pc

FLUIDO1/8 1-way plate spider for connecting 1 rotule joint to the load bearing structure Brushed steel 1 Pc

FLUIDO2/8 2-way plate spider for connecting 2 rotule joints to the load bearing structure Brushed steel 1 Pc

FLUIDOSX/8 1-way left plate spider for connecting 1 rotule joint to the load bearing structure Brushed steel 1 Pc

FLUIDODX/8 1-way right plate spider for connecting 1 rotule joint to the load bearing structure Brushed steel 1 Pc

SYSTEMS FOR OUTDOORS

Page 26

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 153/162 >>>

442,77

174,08

26,81

233,33

183,85

167,64

134,69

103,77

110,30

141,86

210,38

158,60

158,60

SYSTEMS FOR OUTDOORS

Page 27 >>> CATALOGUE REFERENCE PAGE 163/170 >>>

SPC1000/9 Adjustable connector for spider, to be welded to the load bearing structure. Machined steel (CNC) 1 Pc

SPV1000/9 Connecting screw to connect the spider to the load bearing structure, Machined steel (CNC) 1 Pc

with or without connector, Ø36mm M18x2.5mm

STR10/8 Octagonal washer with hole for M20 screw. Brushed steel 1 Pc

STR12/8 Octagonal washer with wide hole for M20 screw, 7mm adjustment. Brushed steel 1 Pc

STR8/8 Octagonal washer with hole for M20 screw, 7mm adjustment. Brushed steel 1 Pc

STR14/8 Octagonal washer with M14 hole Brushed steel 1 Pc

STR16/8 Octagonal washer with wide M14 hole Brushed steel 1 Pc

STR18/8 Octagonal washer with M14 slot Brushed steel 1 Pc

FAÇADES - SPIDER

SP2201/15 4-way spider AISI 316 Polished Steel 1 Pc

SP2202/15 2-way in-line spider AISI 316 Polished Steel 1 Pc

SP2203/15 2-way 90° spider AISI 316 Polished Steel 1 Pc

SP2204/15 1-way in-line spider AISI 316 Polished Steel 1 Pc

SP2205/15 1-way 45° spider AISI 316 Polished Steel 1 Pc

SP2206/15 3-way spider AISI 316 Polished Steel 1 Pc

SP220L01/15 2-way lh spider with wall fitting and on glass-fin AISI 316 Polished Steel 1 Pc

SP220L02/15 2-way rh spider with wall fitting and on glass-fin AISI 316 Polished Steel 1 Pc

SP220L03/15 1-way spider with slotted hole with wall fitting and on glass-fin AISI 316 Polished Steel 1 Pc

SP220L04/15 1-way spider with cylindrical hole with wall fitting and on glass-fin AISI 316 Polished Steel 1 Pc

Art. Description Finish Q.ty EURO25,42

8,05

2,14

2,14

3,92

2,14

2,14

4,10

144,88

71,61

90,20

49,13

58,56

120,46

114,63

114,63

97,14

97,14

FAÇADES - SPIDERS - ACCESSORIES

SP220Z/9 Spider connector, Aisi 316 screw Machined steel (CNC) 1 Pc

SP220Z04/9 Connecting screw for spider AISI 316 Machined steel (CNC) 1 Pc

SP60ALL12/97 Aluminium ring nuts external Ø 60 mm - internal Ø 46 mm height 12 mm Matt aluminium 1 Pc

SP60ALL15/97 Aluminium ring nuts external Ø 60 mm - internal Ø 46 mm height 15 mm Matt aluminium 1 Pc

SP60ALL16/97 Aluminium ring nuts external Ø 60 mm - internal Ø 46 mm height 16 mm Matt aluminium 1 Pc

SP60ALL20/97 Aluminium ring nuts external Ø 60 mm - internal Ø 46 mm height 20 mm Matt aluminium 1 Pc

SP01 Silicone gasket 16.2 x 7.2 Transparent Per m

SP03 Silicone gasket 23.2 x 12.2 Transparent Per m

SP051 Silicone gasket 26.6 x 12.5 Transparent Per m

FAÇADES - ROTULE JOINTS

ROT02D/9 Articulated rotule joints Ø 59 x M14 studded glass thickness 11/36 AISI 316 Machined steel (CNC) 1 Pc

ROT02/9 Articulated rotule joints Ø 59 x M14 studded glass thickness 13/28 AISI 316 Machined steel (CNC) 1 Pc

SYSTEMS FOR OUTDOORS

Page 28

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 171/174 >>>

23.2

12.2

12

18.4

15/20

26.6

12.5

21.7

15.3

18/23

16.2

13.2

3.2

7.2

8/12

25,42

8,94

3,54

3,82

3,92

4,20

4,09

7,03

7,52

37,11

32,47

SYSTEMS FOR GLASS PARTITIONS

Page 29 >>> CATALOGUE REFERENCE PAGE 181/183 >>>

PROFIX DOOR SERIES 66 - 810 PROFILE FOR INSTALLING GLASS DOORS ON GLASS WALLS

PFDOOR6615/97 60x45x1497mm - for wall glass thickness from 8 to 13.52mm Matt aluminium 1 Pc

PFDOOR6630/97 60x45x2998mm - for wall glass thickness from 8 to 13.52mm Matt aluminium 1 Pc

PFDOOR66/97 60x45x6000mm - for wall glass thickness from 8 to 13.52mm Matt aluminium 1 Pc

PFDOOR6615/88 60x45x1497mm - for wall glass thickness from 8 to 13.52mm Brushed steel-effect aluminium 1 Pc

PFDOOR6630/88 60x45x2998mm - for wall glass thickness from 8 to 13.52mm Brushed steel-effect aluminium 1 Pc

PFDOOR66/88 60x45x6000mm - for wall glass thickness from 8 to 13.52mm Brushed steel-effect aluminium 1 Pc

PFDOOR6615/10 60x45x1497mm - for wall glass thickness from 8 to 13.52mm Raw-finish aluminium 1 Pc

PFDOOR6630/10 60x45x2998mm - for wall glass thickness from 8 to 13.52mm Raw-finish aluminium 1 Pc

PFDOOR66/10 60x45x6000mm - for wall glass thickness from 8 to 13.52mm Raw-finish aluminium 1 Pc

PFDOOR81015/97 60x45x1497mm - for glass wall thickness from 16.76 to 21.52mm Matt aluminium 1 Pc

PFDOOR81030/97 60x45x2998mm - for glass wall thickness from 16.76 to 21.52mm Matt aluminium 1 Pc

PFDOOR810/97 60x45x6000mm - for glass wall thickness from 16.76 to 21.52mm Matt aluminium 1 Pc

PFDOOR81015/88 60x45x1497mm - for glass wall thickness from 16.76 to 21.52mm Brushed steel-effect aluminium 1 Pc

PFDOOR81030/88 60x45x2998mm - for glass wall thickness from 16.76 to 21.52mm Brushed steel-effect aluminium 1 Pc

PFDOOR810/88 60x45x6000mm - for glass wall thickness from 16.76 to 21.52mm Brushed steel-effect aluminium 1 Pc

PFDOOR81015/10 60x45x1497mm - for glass wall thickness from 16.76 to 21.52mm Raw-finish aluminium 1 Pc

PFDOOR81030/10 60x45x2998mm - for glass wall thickness from 16.76 to 21.52mm Raw-finish aluminium 1 Pc

PFDOOR810/10 60x45x6000mm - for glass wall thickness from 16.76 to 21.52mm Raw-finish aluminium 1 Pc

PFDOORCUT Profile calculation and custom cutting 1 Pc

PD001/9 AISI 304 steel bracket for joining profiles, Raw-finish stainless steel 1 Set

including fixing grub screws, 4-piece pack

PD002/6 Plastic bracket for profile alignment, 4-piece pack Black 1 Set

GTUP2 Glass holder profile - Thickness: 2mm Transparent Per m

GTUP2300 Glass holder profile pack 300 m Transparent 1 Set

GTUP3 Glass holder profile - Thickness: 3mm Transparent Per m

GTUP3250 Glass holder profile pack 250 m Transparent 1 Set

GTUP4 Glass holder profile - Thickness: 4mm Transparent Per m

GTUP4160 Glass holder profile pack 160 m Transparent 1 Set

GTUP2G Glass holder profile - Thickness: 2mm Embossed Per m

GTUP2300G Glass holder profile pack 300 m Embossed 1 Set

GTUP3G Glass holder profile - Thickness: 3mm Embossed Per m

GTUP3250G Glass holder profile pack 250 m Embossed 1 Set

GTUP4G Glass holder profile - Thickness: 4mm Embossed Per m

GTUP4160G Glass holder profile pack 160 m Embossed 1 Set

PD12 Door stop gasket for glass thicknesses 11.52-13.52 mm Grey Per m

PD8A Door stop gasket for glass thicknesses 8-10.76 mm Grey Per m

PD12250 Door stop gasket for glass thicknesses 11.52-13.52 mm - 250 m roll Grey 1 Set

PD8A160 Door stop gasket for glass thicknesses 8-10.76 mm - 160 m roll Grey 1 Set

PDMUR66/97 PROFIXDOOR kit for glass doors fixed on brickwork walls Matt aluminium 1 Kit

- fixed glass th. 8-8.76mm

PDMUR66/88 PROFIXDOOR kit for glass doors fixed on brickwork walls Brushed steel-effect aluminium 1 Kit

- fixed glass th. 8-8.76mm

Art. Description Finish Q.ty EURO

118,38

223,08

418,78

133,35

253,01

478,65

91,23

168,78

310,18

121,84

229,99

432,60

137,30

260,92

494,46

93,15

172,61

317,85

34,21

31,17

5,77

0,86

256,61

0,97

242,35

1,20

191,60

1,25

376,35

1,43

356,40

1,60

255,46

1,00

5,99

250,90

957,99

72,23

76,31

PROFIX DOOR SERIES ACCESSORIES KIT

PDKIT100/97 Profix door 100 kit consisting of APRO1203 lock and pair of CER4AL hinges Matt aluminium 1 Kit

PDKIT100/88 Profix door 100 kit consisting of APRO1203 lock and pair of CER4AL hinges Brushed steel-effect aluminium 1 Kit

PDKIT300/97 Profix door 300 kit consisting of APRO2203 lock and pair of CER4ALSQ hinges Matt aluminium 1 Kit

PDKIT300/88 Profix door 300 kit consisting of APRO2203 lock and pair of CER4ALSQ hinges Brushed steel-effect aluminium 1 Kit

PROFIX DOOR SERIES KIT FOR STANDARD ROUNDED DOORS

PD100S01/97 PROFIXDOOR rounded kit, left opening, H 2100 x L 750 x M 1050 mm Matt aluminium 1 Kit

PD100S01/88 PROFIXDOOR rounded kit, left opening, H 2100 x L 750 x M 1050 mm Brushed steel-effect aluminium 1 Kit

PD100D03/97 PROFIXDOOR rounded kit, right opening, H 2100 x L 750 x M 1050 mm Matt aluminium 1 Kit

PD100D03/88 PROFIXDOOR rounded kit, right opening, H 2100 x L 750 x M 1050 mm Brushed steel-effect aluminium 1 Kit

PD100S05/97 PROFIXDOOR rounded kit, left opening, H 2300 x L 750 x M 1050 mm Matt aluminium 1 Kit

PD100S05/88 PROFIXDOOR rounded kit, left opening, H 2300 x L 750 x M 1050 mm Brushed steel-effect aluminium 1 Kit

PD100D07/97 PROFIXDOOR rounded kit, right opening, H 2300 x L 750 x M 1050 mm Matt aluminium 1 Kit

PD100D07/88 PROFIXDOOR rounded kit, right opening, H 2300 x L 750 x M 1050 mm Brushed steel-effect aluminium 1 Kit

PD100S09/97 PROFIXDOOR rounded kit, left opening, H 2100 x L 850 x M 900 mm Matt aluminium 1 Kit

PD100S09/88 PROFIXDOOR rounded kit, left opening, H 2100 x L 850 x M 900 mm Brushed steel-effect aluminium 1 Kit

PD100D11/97 PROFIXDOOR rounded kit, right opening, H 2100 x L 850 x M 900 mm Matt aluminium 1 Kit

PD100D11/88 PROFIXDOOR rounded kit, right opening, H 2100 x L 850 x M 900 mm Brushed steel-effect aluminium 1 Kit

PD100S13/97 PROFIXDOOR rounded kit, left opening, H 2300 x L 850 x M 1050 mm Matt aluminium 1 Kit

PD100S13/88 PROFIXDOOR rounded kit, left opening, H 2300 x L 850 x M 1050 mm Brushed steel-effect aluminium 1 Kit

PD100D15/97 PROFIXDOOR rounded kit, right opening, H 2300 x L 850 x M 1050 mm Matt aluminium 1 Kit

PD100D15/88 PROFIXDOOR rounded kit, right opening, H 2300 x L 850 x M 1050 mm Brushed steel-effect aluminium 1 Kit

PD100S17/97 PROFIXDOOR rounded kit, left opening, H 2100 x L 950 x M 1050 mm Matt aluminium 1 Kit

PD100S17/88 PROFIXDOOR rounded kit, left opening, H 2100 x L 950 x M 1050 mm Brushed steel-effect aluminium 1 Kit

PD100D19/97 PROFIXDOOR rounded kit, right opening, H 2100 x L 950 x M 1050 mm Matt aluminium 1 Kit

PD100D19/88 PROFIXDOOR rounded kit, right opening, H 2100 x L 950 x M 1050 mm Brushed steel-effect aluminium 1 Kit

PD100S21/97 PROFIXDOOR rounded kit, left opening, H 2300 x L 950 x M 1050 mm Matt aluminium 1 Kit

PD100S21/88 PROFIXDOOR rounded kit, left opening, H 2300 x L 950 x M 1050 mm Brushed steel-effect aluminium 1 Kit

PD100D23/97 PROFIXDOOR rounded kit, right opening, H 2300 x L 950 x M 1050 mm Matt aluminium 1 Kit

PD100D23/88 PROFIXDOOR rounded kit, right opening, H 2300 x L 950 x M 1050 mm Brushed steel-effect aluminium 1 Kit

PROFIX DOOR SERIES KIT FOR STANDARD SQUARE DOORS

PD300S02/97 PROFIXDOOR square kit, left opening, H 2100 x L 750 x M 1050 mm Matt aluminium 1 Kit

PD300S02/88 PROFIXDOOR square kit, left opening, H 2100 x L 750 x M 1050 mm Brushed steel-effect aluminium 1 Kit

PD300D04/97 PROFIXDOOR square kit, right opening, H 2100 x L 750 x M 1050 mm Matt aluminium 1 Kit

PD300D04/88 PROFIXDOOR square kit, right opening, H 2100 x L 750 x M 1050 mm Brushed steel-effect aluminium 1 Kit

PD300S06/97 PROFIXDOOR square kit, left opening, H 2300 x L 750 x M 1050 mm Matt aluminium 1 Kit

PD300S06/88 PROFIXDOOR square kit, left opening, H 2300 x L 750 x M 1050 mm Brushed steel-effect aluminium 1 Kit

PD300D08/97 PROFIXDOOR square kit, right opening, H 2300 x L 750 x M 1050 mm Matt aluminium 1 Kit

PD300D08/88 PROFIXDOOR square kit, right opening, H 2300 x L 750 x M 1050 mm Brushed steel-effect aluminium 1 Kit

PD300S10/97 PROFIXDOOR square kit, left opening, H 2100 x L 850 x M 900 mm Matt aluminium 1 Kit

PD300S10/88 PROFIXDOOR square kit, left opening, H 2100 x L 850 x M 900 mm Brushed steel-effect aluminium 1 Kit

PD300D12/97 PROFIXDOOR square kit, right opening, H 2100 x L 850 x M 900 mm Matt aluminium 1 Kit

SYSTEMS FOR GLASS PARTITIONS

Page 30

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 184/189 >>>

306,57

313,20

271,87

284,05

817,66

871,00

817,66

871,00

817,66

871,00

817,66

871,00

817,66

871,00

817,66

871,00

817,66

871,00

817,66

871,00

817,66

871,00

817,66

871,00

818,59

871,93

818,59

871,93

782,96

845,04

782,96

845,04

782,96

845,04

782,96

845,04

782,96

845,04

782,96

SYSTEMS FOR GLASS PARTITIONS

Page 31 >>> CATALOGUE REFERENCE PAGE 189/192 >>>

PD300D12/88 PROFIXDOOR square kit, right opening, H 2100 x L 850 x M 900mm Brushed steel-effect aluminium 1 Kit

PD300S14/97 PROFIXDOOR square kit, left opening, H 2300 x L 850 x M 1050mm Matt aluminium 1 Kit

PD300S14/88 PROFIXDOOR square kit, left opening, H 2300 x L 850 x M 1050mm Brushed steel-effect aluminium 1 Kit

PD300D16/97 PROFIXDOOR square kit, right opening, H 2300 x L 850 x M 1050mm Matt aluminium 1 Kit

PD300D16/88 PROFIXDOOR square kit, right opening, H 2300 x L 850 x M 1050mm Brushed steel-effect aluminium 1 Kit

PD300S18/97 PROFIXDOOR square kit, left opening, H 2100 x L 950 x M 1050mm Matt aluminium 1 Kit

PD300S18/88 PROFIXDOOR square kit, left opening, H 2100 x L 950 x M 1050mm Brushed steel-effect aluminium 1 Kit

PD300D20/97 PROFIXDOOR square kit, right opening, H 2100 x L 950 x M 1050mm Matt aluminium 1 Kit

PD300D20/88 PROFIXDOOR square kit, right opening, H 2100 x L 950 x M 1050mm Brushed steel-effect aluminium 1 Kit

PD300S22/97 PROFIXDOOR square kit, left opening, H 2300 x L 950 x M 1050mm Matt aluminium 1 Kit

PD300S22/88 PROFIXDOOR square kit, left opening, H 2300 x L 950 x M 1050mm Brushed steel-effect aluminium 1 Kit

PD300D24/97 PROFIXDOOR square kit, right opening, H 2300 x L 950 x M 1050mm Matt aluminium 1 Kit

PD300D24/88 PROFIXDOOR square kit, right opening, H 2300 x L 950 x M 1050mm Brushed steel-effect aluminium 1 Kit

PROFIX DOOR SERIES 66 - 810 DOORS KIT FOR INSTALLING GLASS DOORS ON GLASS WALLS

PDKIT01/97 PROFIXDOOR kit fixed glass th. 8-8.76mm door glass th. 8-10mm Matt aluminium 1 Kit

PDKIT01/88 PROFIXDOOR kit fixed glass th. 8-8.76mm door glass th. 8-10mm Brushed steel-effect aluminium 1 Kit

PDKIT02/97 PROFIXDOOR kit fixed glass th. 10-10.76mm door glass th. 8-10mm Matt aluminium 1 Kit

PDKIT02/88 PROFIXDOOR kit fixed glass th. 10-10.76mm door glass th. 8-10mm Brushed steel-effect aluminium 1 Kit

PDKIT03/97 PROFIXDOOR kit fixed glass th. 11.52mm door glass th. 8-10mm Matt aluminium 1 Kit

PDKIT03/88 PROFIXDOOR kit fixed glass th. 11.52mm door glass th. 8-10mm Brushed steel-effect aluminium 1 Kit

PDKIT04/97 PROFIXDOOR kit fixed glass th. 12mm door glass th. 8-10mm Matt aluminium 1 Kit

PDKIT04/88 PROFIXDOOR kit fixed glass th. 12mm door glass th. 8-10mm Brushed steel-effect aluminium 1 Kit

PDKIT05/97 PROFIXDOOR kit fixed glass th. 12.76mm door glass th. 8-10mm Matt aluminium 1 Kit

PDKIT05/88 PROFIXDOOR kit fixed glass th. 12.76mm door glass th. 8-10mm Brushed steel-effect aluminium 1 Kit

PDKIT06/97 PROFIXDOOR kit fixed glass th. 13.52mm door glass th. 8-10mm Matt aluminium 1 Kit

PDKIT06/88 PROFIXDOOR kit fixed glass th. 13.52mm door glass th. 8-10mm Brushed steel-effect aluminium 1 Kit

PDKIT07/97 PROFIXDOOR kit fixed glass th. 16.76-17.52mm door glass th. 8-10mm Matt aluminium 1 Kit

PDKIT07/88 PROFIXDOOR kit fixed glass th. 16.76-17.52mm door glass th. 8-10mm Brushed steel-effect aluminium 1 Kit

PDKIT08/97 PROFIXDOOR kit fixed glass th. 20.76-21.52mm door glass th. 8-10mm Matt aluminium 1 Kit

PDKIT08/88 PROFIXDOOR kit fixed glass th. 20.76-21.52mm door glass th. 8-10mm Brushed steel-effect aluminium 1 Kit

PDKIT09/97 PROFIXDOOR kit fixed glass th. 8-8.76mm door glass th. 10.76-13.52mm Matt aluminium 1 Kit

PDKIT09/88 PROFIXDOOR kit fixed glass th. 8-8.76mm door glass th. 10.76-13.52mm Brushed steel-effect aluminium 1 Kit

PDKIT10/97 PROFIXDOOR kit fixed glass th. 10-10.76mm door glass th. 10.76-13.52mm Matt aluminium 1 Kit

PDKIT10/88 PROFIXDOOR kit fixed glass th. 10-10.76mm door glass th. 10.76-13.52mm Brushed steel-effect aluminium 1 Kit

PDKIT11/97 PROFIXDOOR kit fixed glass th. 11.52mm door glass th. 10.76-13.52mm Matt aluminium 1 Kit

PDKIT11/88 PROFIXDOOR kit fixed glass th. 11.52mm door glass th. 10.76-13.52mm Brushed steel-effect aluminium 1 Kit

PDKIT12/97 PROFIXDOOR kit fixed glass th. 12mm door glass th. 10.76-13.52mm Matt aluminium 1 Kit

PDKIT12/88 PROFIXDOOR kit fixed glass th. 12mm door glass th. 10.76-13.52mm Brushed steel-effect aluminium 1 Kit

PDKIT13/97 PROFIXDOOR kit fixed glass th. 12.76mm door glass th. 10.76-13.52mm Matt aluminium 1 Kit

PDKIT13/88 PROFIXDOOR kit fixed glass th. 12.76mm door glass th. 10.76-13.52mm Brushed steel-effect aluminium 1 Kit

PDKIT14/97 PROFIXDOOR kit fixed glass th. 13.52mm door glass th. 10.76-13.52mm Matt aluminium 1 Kit

PDKIT14/88 PROFIXDOOR kit fixed glass th. 13.52mm door glass th. 10.76-13.52mm Brushed steel-effect aluminium 1 Kit

PDKIT15/97 PROFIXDOOR kit fixed glass th. 16.76-17.52mm door glass th. 10.76-13.52mm Matt aluminium 1 Kit

PDKIT15/88 PROFIXDOOR kit fixed glass th. 16.76-17.52mm door glass th. 10.76-13.52mm Brushed steel-effect aluminium 1 Kit

PDKIT16/97 PROFIXDOOR kit fixed glass th. 20.76-21.52mm door glass th. 10.76-13.52mm Matt aluminium 1 Kit

PDKIT16/88 PROFIXDOOR kit fixed glass th. 20.76-21.52mm door glass th. 10.76-13.52mm Brushed steel-effect aluminium 1 Kit

Art. Description Finish Q.ty EURO845,04

782,96

845,04

782,96

845,04

782,96

845,04

782,96

845,04

783,89

845,97

783,89

845,97

554,71

614,58

551,97

611,85

551,29

611,16

550,60

610,48

546,16

606,03

547,52

607,40

568,53

630,39

564,43

626,28

524,81

584,68

522,07

581,94

521,38

581,26

520,70

580,57

516,25

576,13

517,62

577,50

538,63

600,49

534,52

596,38

ALUMINIUM PROFILES - PROFIX SERIES

●PROFIX1630/97 U-shaped aluminium profile 21 x 30 Length 3000mm Matt aluminium 1 Pc

●PROFIX1630/88 U-shaped aluminium profile 21 x 30 Length 3000mm Brushed steel-effect aluminium 1 Pc

●PROFIX1630/91 U-shaped aluminium profile 21 x 30 Length 3000mm Polished aluminium 1 Pc

●PROFIX1630/10 U-shaped aluminium profile 21 x 30 Length 3000mm Raw-finish aluminium 1 Pc

●PROFIX1660/97 U-shaped aluminium profile 21 x 30 Length 6000mm Matt aluminium 1 Pc

●PROFIX1660/88 U-shaped aluminium profile 21 x 30 Length 6000mm Brushed steel-effect aluminium 1 Pc

●PROFIX1660/10 U-shaped aluminium profile 21 x 30 Length 6000mm Raw-finish aluminium 1 Pc

PROFIXTPU/97 Side cap 30X21mm TH=1mm for PROFIX1630-1660-2130-2160 Matt aluminium 1 Pc

PROFIXTPU/88 Side cap 30X21mm TH=1mm for PROFIX1630-1660-2130-2160 Brushed steel-effect aluminium 1 Pc

PROFIXTPU/91 Side cap 30X21mm TH=1mm for PROFIX1630-1660-2130-2160 Polished aluminium 1 Pc

PROFIXTPU/10 Side cap 30X21mm TH=1mm for PROFIX1630-1660-2130-2160 Raw-finish aluminium 1 Pc

●PROFIX2130/97 Aluminium snap profile 21 x 30 Length 3000mm Matt aluminium 1 Pc

●PROFIX2130/88 Aluminium snap profile 21 x 30 Length 3000mm Brushed steel-effect aluminium 1 Pc

●PROFIX2130/91 Aluminium snap profile 21 x 30 Length 3000mm Polished aluminium 1 Pc

●PROFIX2130/10 Aluminium snap profile 21 x 30 Length 3000mm Raw-finish aluminium 1 Pc

●PROFIX2160/97 Aluminium snap profile 21 x 30 Length 6000mm Matt aluminium 1 Pc

●PROFIX2160/88 Aluminium snap profile 21 x 30 Length 6000mm Brushed steel-effect aluminium 1 Pc

●PROFIX2160/10 Aluminium snap profile 21 x 30 Length 6000mm Raw-finish aluminium 1 Pc

PROFIXTPU/97 Side cap 30X21mm TH=1mm for PROFIX1630-1660-2130-2160 Matt aluminium 1 Pc

PROFIXTPU/88 Side cap 30X21mm TH=1mm for PROFIX1630-1660-2130-2160 Brushed steel-effect aluminium 1 Pc

PROFIXTPU/91 Side cap 30X21mm TH=1mm for PROFIX1630-1660-2130-2160 Polished aluminium 1 Pc

PROFIXTPU/10 Side cap 30X21mm TH=1mm for PROFIX1630-1660-2130-2160 Raw-finish aluminium 1 Pc

●PROFIX4272/97 U-shaped aluminium profiles 13.6 x 13 Length 3000mm Matt aluminium 1 Pc

●PROFIX4272/88 U-shaped aluminium profiles 13.6 x 13 Length 3000mm Brushed steel-effect aluminium 1 Pc

●PROFIX4272/91 U-shaped aluminium profiles 13.6 x 13 Length 3000mm Polished aluminium 1 Pc

●PROFIX4125/97 H-shaped aluminium profiles 13.6 x 25 Length 3000mm Matt aluminium 1 Pc

●PROFIX4125/88 H-shaped aluminium profiles 13.6 x 25 Length 3000mm Brushed steel-effect aluminium 1 Pc

●PROFIX4125/91 H-shaped aluminium profiles 13.6 x 25 Length 3000mm Polished aluminium 1 Pc

GTUP2 Glass holder profile - Thickness: 2mm Transparent Per m

GTUP2300 Glass holder profile pack 300 m Transparent 1 Set

GTUP3 Glass holder profile - Thickness: 3mm Transparent Per m

GTUP3250 Glass holder profile pack 250 m Transparent 1 Set

GTUP4 Glass holder profile - Thickness: 4mm Transparent Per m

GTUP4160 Glass holder profile pack 160 m Transparent 1 Set

GTUP5 Glass holder profile - Thickness 5mm Transparent Per m

GTUP5120 Glass holder profile pack 120 m Transparent 1 Set

ALUMINIUM PROFILES - PROFIX T

●PROFIXT30/97 3 or 4 way profile connecting to PROFIX2130 or 2160 profile Matt aluminium 1 Pc

●PROFIXT30/88 3 or 4 way profile connecting to PROFIX2130 or 2160 profile Brushed steel-effect aluminium 1 Pc

●PROFIXT30/10 3 or 4 way profile connecting to PROFIX2130 or 2160 profile Raw-finish aluminium 1 Pc

●PROFIXT30/91 3 or 4 way profile connecting to PROFIX2130 or 2160 profile Polished aluminium 1 Pc

SYSTEMS FOR GLASS PARTITIONS

Page 32

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 195/197 >>>

56,11

61,07

75,27

36,78

109,26

119,24

70,59

5,59

5,59

5,59

4,01

104,12

111,20

153,85

76,87

215,83

229,98

161,32

5,59

5,59

5,59

4,01

14,71

15,83

48,36

22,13

23,89

52,92

0,86

256,61

0,97

242,35

1,20

191,60

1,65

198,44

108,33

132,73

83,30

193,51

SYSTEMS FOR GLASS PARTITIONS

Page 33 >>> CATALOGUE REFERENCE PAGE 200/204 >>>

ALUMINIUM PROFILES - SUPERPROFIX 881010

●PROFIX2430/97 Super Profix 810 aluminium U-profile 30 x 40 Length 3000mm Matt aluminium 1 Pc

●PROFIX2430/88 Super Profix 810 aluminium U-profile 30 x 40 Length 3000mm Brushed steel-effect aluminium 1 Pc

●PROFIX2430/91 Super Profix 810 aluminium U-profile 30 x 40 Length 3000mm Polished aluminium 1 Pc

●PROFIX2430/10 Super Profix 810 aluminium U-profile 30 x 40 Length 3000mm Raw-finish aluminium 1 Pc

●PROFIX2460/97 Super Profix 810 aluminium U-profile 30 x 40 Length 6000mm Matt aluminium 1 Pc

●PROFIX2460/88 Super Profix 810 aluminium U-profile 30 x 40 Length 6000mm Brushed steel-effect aluminium 1 Pc

●PROFIX2460/10 Super Profix 810 aluminium U-profile 30 x 40 Length 6000mm Raw-finish aluminium 1 Pc

PROFIXTPU810/97 Side cap 30X40mm TH=1mm for PROFIX 2430-2460-3030-3060 Matt aluminium 1 Pc

PROFIXTPU810/88 Side cap 30X40mm TH=1mm for PROFIX 2430-2460-3030-3060 Brushed steel-effect aluminium 1 Pc

PROFIXTPU810/91 Side cap 30X40mm TH=1mm for PROFIX 2430-2460-3030-3060 Polished aluminium 1 Pc

PROFIXTPU810/10 Side cap 30X40mm TH=1mm for PROFIX 2430-2460-3030-3060 Raw-finish aluminium 1 Pc

●PROFIX3030/97 Super Profix 810 snap aluminium profile 30 x 40 Length 3000mm Matt aluminium 1 Pc

●PROFIX3030/88 Super Profix 810 snap aluminium profile 30 x 40 Length 3000mm Brushed steel-effect aluminium 1 Pc

●PROFIX3030/91 Super Profix 810 snap aluminium profile 30 x 40 Length 3000mm Polished aluminium 1 Pc

●PROFIX3030/10 Super Profix 810 snap aluminium profile 30 x 40 Length 3000mm Raw-finish aluminium 1 Pc

●PROFIX3060/97 Super Profix 810 snap aluminium profile 30 x 40 Length 6000mm Matt aluminium 1 Pc

●PROFIX3060/88 Super Profix 810 snap aluminium profile 30 x 40 Length 6000mm Brushed steel-effect aluminium 1 Pc

●PROFIX3060/10 Super Profix 810 snap aluminium profile 30 x 40 Length 6000mm Raw-finish aluminium 1 Pc

PROFIXTPU810/97 Side cap 30X40mm TH=1mm for PROFIX 2430-2460-3030-3060 Matt aluminium 1 Pc

PROFIXTPU810/88 Side cap 30X40mm TH=1mm for PROFIX 2430-2460-3030-3060 Brushed steel-effect aluminium 1 Pc

PROFIXTPU810/91 Side cap 30X40mm TH=1mm for PROFIX 2430-2460-3030-3060 Polished aluminium 1 Pc

PROFIXTPU810/10 Side cap 30X40mm TH=1mm for PROFIX 2430-2460-3030-3060 Raw-finish aluminium 1 Pc

U-SHAPED ALUMINIUM PROFILES - PROFIX 2 SERIES

●PROFIX1830/97 Profix 2 aluminium snap profile, 18 x 28 Length 3000 mm Matt aluminium 1 Pc

●PROFIX1830/88 Profix 2 aluminium snap profile, 18 x 28 Length 3000 mm Brushed steel-effect aluminium 1 Pc

●PROFIX1830/91 Profix 2 aluminium snap profile, 18 x 28 Length 3000 mm Polished aluminium 1 Pc

●PROFIX1830/10 Profix 2 aluminium snap profile, 18 x 28 Length 3000 mm Raw-finish aluminium 1 Pc

●PROFIX1860/97 Profix 2 aluminium snap profile, 18 x 28 Length 6000 mm Matt aluminium 1 Pc

●PROFIX1860/88 Profix 2 aluminium snap profile, 18 x 28 Length 6000 mm Brushed steel-effect aluminium 1 Pc

●PROFIX1860/10 Profix 2 aluminium snap profile, 18 x 28 Length 6000 mm Raw-finish aluminium 1 Pc

●PROFIX2230/97 Profix 2 aluminium snap profile, 22 x 28 Length 3000 mm Matt aluminium 1 Pc

●PROFIX2230/88 Profix 2 aluminium snap profile, 22 x 28 Length 3000 mm Brushed steel-effect aluminium 1 Pc

●PROFIX2230/91 Profix 2 aluminium snap profile, 22 x 28 Length 3000 mm Polished aluminium 1 Pc

●PROFIX2230/10 Profix 2 aluminium snap profile, 22 x 28 Length 3000 mm Raw-finish aluminium 1 Pc

●PROFIX2260/97 Profix 2 aluminium snap profile, 22 x 28 Length 6000 mm Matt aluminium 1 Pc

●PROFIX2260/88 Profix 2 aluminium snap profile, 22 x 28 Length 6000 mm Brushed steel-effect aluminium 1 Pc

●PROFIX2260/10 Profix 2 aluminium snap profile, 22 x 28 Length 6000 mm Raw-finish aluminium 1 Pc

●PROFIX2530/97 Profix 2 aluminium snap profile, 24 x 28 Length 3000 mm Matt aluminium 1 Pc

●PROFIX2530/88 Profix 2 aluminium snap profile, 24 x 28 Length 3000 mm Brushed steel-effect aluminium 1 Pc

●PROFIX2530/91 Profix 2 aluminium snap profile, 24 x 28 Length 3000 mm Polished aluminium 1 Pc

●PROFIX2530/10 Profix 2 aluminium snap profile, 24 x 28 Length 3000 mm Raw-finish aluminium 1 Pc

●PROFIX2560/97 Profix 2 aluminium snap profile, 24 x 28 Length 6000 mm Matt aluminium 1 Pc

●PROFIX2560/88 Profix 2 aluminium snap profile, 24 x 28 Length 6000 mm Brushed steel-effect aluminium 1 Pc

●PROFIX2560/10 Profix 2 aluminium snap profile, 24 x 28 Length 6000 mm Raw-finish aluminium 1 Pc

Art. Description Finish Q.ty EURO

96,88

100,53

78,29

59,48

189,03

196,33

114,22

7,18

7,18

7,18

4,15

182,53

188,29

154,25

123,46

349,78

361,30

231,57

7,18

7,18

7,18

4,15

101,16

116,27

128,19

84,85

178,43

208,71

146,72

106,41

119,52

135,60

92,38

196,67

222,85

169,36

112,62

127,05

140,45

97,17

209,10

237,90

179,00

PROFIXTP18/97 Profix 2 cap, 18 x 28 mm Matt aluminium 1 Pc

PROFIXTP18/88 Profix 2 cap, 18 x 28 mm Brushed steel-effect aluminium 1 Pc

PROFIXTP18/91 Profix 2 cap, 18 x 28 mm Polished aluminium 1 Pc

PROFIXTP18/10 Profix 2 cap, 18 x 28 mm Raw-finish aluminium 1 Pc

PROFIXTP22/97 Profix 2 cap, 22 x 28 mm Matt aluminium 1 Pc

PROFIXTP22/88 Profix 2 cap, 22 x 28 mm Brushed steel-effect aluminium 1 Pc

PROFIXTP22/91 Profix 2 cap, 22 x 28 mm Polished aluminium 1 Pc

PROFIXTP22/10 Profix 2 cap, 22 x 28 mm Raw-finish aluminium 1 Pc

PROFIXTP25/97 Profix 2 cap, 24 x 28 mm Matt aluminium 1 Pc

PROFIXTP25/88 Profix 2 cap, 24 x 28 mm Brushed steel-effect aluminium 1 Pc

PROFIXTP25/91 Profix 2 cap, 24 x 28 mm Polished aluminium 1 Pc

PROFIXTP25/10 Profix 2 cap, 24 x 28 mm Raw-finish aluminium 1 Pc

GTUP2G Glass holder profile - Thickness: 2mm Embossed Per m

GTUP2300G Glass holder profile pack 300 m Embossed 1 Set

GTUP3G Glass holder profile - Thickness: 3mm Embossed Per m

GTUP3250G Glass holder profile pack 250 m Embossed 1 Set

GTUP4G Glass holder profile - Thickness: 4mm Embossed Per m

GTUP4160G Glass holder profile pack 160 m Embossed 1 Set

GTUP5G Glass holder profile - Thickness: 5mm Embossed Per m

GTUP5120G Glass holder profile pack 120 m Embossed 1 Set

PROFIXG L gasket for Profix 2 Embossed Per m

PROFIXG080 L gasket for Profix 2 - 80 m roll Embossed 1 Set

UTR65 Tool with wheel made of plastic material diameter 65 mm 1 Pc

U-SHAPED ALUMINIUM PROFILES - PROFALL SERIES

●PROFALL0820/97 U-shaped aluminium profile - A20 B8.5 C11.5 D1.5 - Length 3000 mm Matt aluminium 1 Pc

●PROFALL0820/88 U-shaped aluminium profile - A20 B8.5 C11.5 D1.5 - Length 3000 mm Brushed steel-effect aluminium 1 Pc

●PROFALL0820/91 U-shaped aluminium profile - A20 B8.5 C11.5 D1.5 - Length 3000 mm Polished aluminium 1 Pc

●PROFALL1020/97 U-shaped aluminium profile - A20 B10.5 C13.5 D1.5 - Length 3000 mm Matt aluminium 1 Pc

●PROFALL1020/88 U-shaped aluminium profile - A20 B10.5 C13.5 D1.5 - Length 3000 mm Brushed steel-effect aluminium 1 Pc

●PROFALL1020/91 U-shaped aluminium profile - A20 B10.5 C13.5 D1.5 - Length 3000 mm Polished aluminium 1 Pc

●PROFALL1225/97 U-shaped aluminium profile - A25 B12 C17 D2.5 - Length 3000 mm Matt aluminium 1 Pc

●PROFALL1225/88 U-shaped aluminium profile - A25 B12 C17 D2.5 - Length 3000 mm Brushed steel-effect aluminium 1 Pc

●PROFALL1225/91 U-shaped aluminium profile - A25 B12 C17 D2.5 - Length 3000 mm Polished aluminium 1 Pc

●PROFALL1240/97 U-shaped aluminium profile - A40 B12 C17 D2.5 - Length 3000 mm Matt aluminium 1 Pc

●PROFALL1240/88 U-shaped aluminium profile - A40 B12 C17 D2.5 - Length 3000 mm Brushed steel-effect aluminium 1 Pc

●PROFALL1240/91 U-shaped aluminium profile - A40 B12 C17 D2.5 - Length 3000 mm Polished aluminium 1 Pc

●PROFALL1425/97 U-shaped aluminium profile - A25 B14 C19 D2.5 - Length 3000 mm Matt aluminium 1 Pc

●PROFALL1425/88 U-shaped aluminium profile - A25 B14 C19 D2.5 - Length 3000 mm Brushed steel-effect aluminium 1 Pc

●PROFALL1425/91 U-shaped aluminium profile - A25 B14 C19 D2.5 - Length 3000 mm Polished aluminium 1 Pc

●PROFALL1440/97 U-shaped aluminium profile - A40 B14 C19 D2.5 - Length 3000 mm Matt aluminium 1 Pc

●PROFALL1440/88 U-shaped aluminium profile - A40 B14 C19 D2.5 - Length 3000 mm Brushed steel-effect aluminium 1 Pc

●PROFALL1440/91 U-shaped aluminium profile - A40 B14 C19 D2.5 - Length 3000 mm Polished aluminium 1 Pc

PROTAP0820/97 Side cap A20 B8.5 TH=1 mm for PROFALL0820 Matt aluminium 1 Pc

PROTAP0820/88 Side cap A20 B8.5 TH=1 mm for PROFALL0820 Brushed steel-effect aluminium 1 Pc

PROTAP0820/91 Side cap A20 B8.5 TH=1 mm for PROFALL0820 Polished aluminium 1 Pc

PROTAP1020/97 Side cap A20 B10.5 TH=1mm for PROFALL1020 Matt aluminium 1 Pc

SYSTEMS FOR GLASS PARTITIONS

Page 34

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 204/207 >>>

4,73

8,72

8,72

1,88

4,73

8,72

8,72

1,88

4,73

8,72

8,72

1,88

1,25

376,35

1,43

356,40

1,60

255,46

1,82

218,97

3,08

246,34

46,76

31,20

33,75

39,66

32,43

35,14

40,48

61,26

67,33

64,79

89,09

97,63

86,88

62,73

68,81

66,02

90,98

99,60

88,11

9,33

9,33

9,01

9,33

SYSTEMS FOR GLASS PARTITIONS

Page 35 >>> CATALOGUE REFERENCE PAGE 207/209 >>>

PROTAP1020/88 Side cap A20 B10.5 TH=1mm for PROFALL1020 Brushed steel-effect aluminium 1 Pc

PROTAP1020/91 Side cap A20 B10.5 TH=1mm for PROFALL1020 Polished aluminium 1 Pc

PROTAP1225/97 Side cap A25 B12 TH=1mm for PROFALL1225 Matt aluminium 1 Pc

PROTAP1225/88 Side cap A25 B12 TH=1mm for PROFALL1225 Brushed steel-effect aluminium 1 Pc

PROTAP1225/91 Side cap A25 B12 TH=1mm for PROFALL1225 Polished aluminium 1 Pc

PROTAP1240/97 Side cap A40 B12 TH=1 mm for PROFALL1240 Matt aluminium 1 Pc

PROTAP1240/88 Side cap A40 B12 TH=1 mm for PROFALL1240 Brushed steel-effect aluminium 1 Pc

PROTAP1240/91 Side cap A40 B12 TH=1 mm for PROFALL1240 Polished aluminium 1 Pc

PROTAP1425/97 Side cap A25 B14 TH=1 mm for PROFALL1425 Matt aluminium 1 Pc

PROTAP1425/88 Side cap A25 B14 TH=1 mm for PROFALL1425 Brushed steel-effect aluminium 1 Pc

PROTAP1425/91 Side cap A25 B14 TH=1 mm for PROFALL1425 Polished aluminium 1 Pc

PROTAP1440/97 Side cap A40 B14 TH=1mm for PROFALL1440 Matt aluminium 1 Pc

PROTAP1440/88 Side cap A40 B14 TH=1mm for PROFALL1440 Brushed steel-effect aluminium 1 Pc

PROTAP1440/91 Side cap A40 B14 TH=1mm for PROFALL1440 Polished aluminium 1 Pc

U-SHAPED ALUMINIUM PROFILES - PROALUX SERIES

●PROALUX1520/97 U-shaped aluminium profile - A20 B10.5 C15.5 - Length 3000 mm Matt aluminium 1 Pc

●PROALUX1520/88 U-shaped aluminium profile - A20 B10.5 C15.5 - Length 3000 mm Brushed steel-effect aluminium 1 Pc

●PROALUX1520/91 U-shaped aluminium profile - A20 B10.5 C15.5 - Length 3000 mm Polished aluminium 1 Pc

●PROALUX1530/97 U-shaped aluminium profile - A30 B10.5 C15.5 - Length 3000 mm Matt aluminium 1 Pc

●PROALUX1530/88 U-shaped aluminium profile - A30 B10.5 C15.5 - Length 3000 mm Brushed steel-effect aluminium 1 Pc

●PROALUX1530/91 U-shaped aluminium profile - A30 B10.5 C15.5 - Length 3000 mm Polished aluminium 1 Pc

●PROALUX1720/97 U-shaped aluminium profile - A20 B12.5 C17.5 - Length 3000 mm Matt aluminium 1 Pc

●PROALUX1720/88 U-shaped aluminium profile - A20 B12.5 C17.5 - Length 3000 mm Brushed steel-effect aluminium 1 Pc

●PROALUX1720/91 U-shaped aluminium profile - A20 B12.5 C17.5 - Length 3000 mm Polished aluminium 1 Pc

●PROALUX1730/97 U-shaped aluminium profile - A30 B12.5 C17.5 - Length 3000 mm Matt aluminium 1 Pc

●PROALUX1730/88 U-shaped aluminium profile - A30 B12.5 C17.5 - Length 3000 mm Brushed steel-effect aluminium 1 Pc

●PROALUX1730/91 U-shaped aluminium profile - A30 B12.5 C17.5 - Length 3000 mm Polished aluminium 1 Pc

●PROALUX1920/97 U-shaped aluminium profile - A20 B14.5 C19.5 - Length 3000 mm Matt aluminium 1 Pc

●PROALUX1920/88 U-shaped aluminium profile - A20 B14.5 C19.5 - Length 3000 mm Brushed steel-effect aluminium 1 Pc

●PROALUX1920/91 U-shaped aluminium profile - A20 B14.5 C19.5 - Length 3000 mm Polished aluminium 1 Pc

●PROALUX1930/97 U-shaped aluminium profile - A30 B14.5 C19.5 - Length 3000 mm Matt aluminium 1 Pc

●PROALUX1930/88 U-shaped aluminium profile - A30 B14.5 C19.5 - Length 3000 mm Brushed steel-effect aluminium 1 Pc

●PROALUX1930/91 U-shaped aluminium profile - A30 B14.5 C19.5 - Length 3000 mm Polished aluminium 1 Pc

PROTAP1520/97 Side cap A20 C15.5 TH=1 mm for PROALUX1520 Matt aluminium 1 Pc

PROTAP1520/88 Side cap A20 C15.5 TH=1 mm for PROALUX1520 Brushed steel-effect aluminium 1 Pc

PROTAP1520/91 Side cap A20 C15.5 TH=1 mm for PROALUX1520 Polished aluminium 1 Pc

PROTAP1530/97 Side cap A30 C15.5 TH=1 mm for PROALUX1530 Matt aluminium 1 Pc

PROTAP1530/88 Side cap A30 C15.5 TH=1 mm for PROALUX1530 Brushed steel-effect aluminium 1 Pc

PROTAP1530/91 Side cap A30 C15.5 TH=1 mm for PROALUX1530 Polished aluminium 1 Pc

PROTAP1720/97 Side cap A20 C17.5 TH=1 mm for PROALUX1720 Matt aluminium 1 Pc

PROTAP1720/88 Side cap A20 C17.5 TH=1 mm for PROALUX1720 Brushed steel-effect aluminium 1 Pc

PROTAP1720/91 Side cap A20 C17.5 TH=1 mm for PROALUX1720 Polished aluminium 1 Pc

PROTAP1730/97 Side cap A30 C17.5 TH=1 mm for PROALUX1730 Matt aluminium 1 Pc

PROTAP1730/88 Side cap A30 C17.5 TH=1 mm for PROALUX1730 Brushed steel-effect aluminium 1 Pc

PROTAP1730/91 Side cap A30 C17.5 TH=1 mm for PROALUX1730 Polished aluminium 1 Pc

PROTAP1920/97 Side cap A20 C19.5 TH=1 mm for PROALUX1920 Matt aluminium 1 Pc

Art. Description Finish Q.ty EURO9,33

9,54

10,92

10,92

10,92

12,93

12,93

12,93

10,60

10,60

10,60

12,93

12,93

12,93

41,27

44,35

74,72

58,36

62,77

88,13

42,60

45,77

75,78

59,67

64,17

89,16

44,05

47,33

76,93

61,10

65,71

90,30

4,56

8,55

8,55

4,56

8,55

8,55

4,56

8,55

8,55

4,56

8,55

8,55

4,56

PROTAP1920/88 Side cap A20 C19.5 TH=1 mm for PROALUX1920 Brushed steel-effect aluminium 1 Pc

PROTAP1920/91 Side cap A20 C19.5 TH=1 mm for PROALUX1920 Polished aluminium 1 Pc

PROTAP1930/97 Side cap A30 C19.5 TH=1 mm for PROALUX1930 Matt aluminium 1 Pc

PROTAP1930/88 Side cap A30 C19.5 TH=1 mm for PROALUX1930 Brushed steel-effect aluminium 1 Pc

PROTAP1930/91 Side cap A30 C19.5 TH=1 mm for PROALUX1930 Polished aluminium 1 Pc

PROALUXG Gasket 5 x 9.5 mm for PROALUX Per m

PROALUXG400 Gasket 5 x 9.5 mm for PROALUX - 400 metre roll 1 Set

UTR65 Tool with wheel made of plastic material diameter 65 mm 1 Pc

IMBOTTE SERIES - PROFILES TO INSTALL GLASS DOORS - GLASS THICKNESS FROM 8 TO 13.52mm

IBT7015/97 Profiles for fixed walls 82x55x1497 mm - wall thickness from 67 to 85mm Matt aluminium 1 Pc

IBT7030/97 Profiles for fixed walls 82x55x2998 mm - wall thickness from 67 to 85mm Matt aluminium 1 Pc

IBT70/97 Profiles for fixed walls 82x55x6000 mm - wall thickness from 67 to 85mm Matt aluminium 1 Pc

IBT7015/88 Profiles for fixed walls 82x55x1497 mm - wall thickness from 67 to 85mm Brushed steel-effect aluminium 1 Pc

IBT7030/88 Profiles for fixed walls 82x55x2998 mm - wall thickness from 67 to 85mm Brushed steel-effect aluminium 1 Pc

IBT70/88 Profiles for fixed walls 82x55x6000 mm - wall thickness from 67 to 85mm Brushed steel-effect aluminium 1 Pc

IBT7015/10 Profiles for fixed walls 82x55x1497 mm - wall thickness from 67 to 85mm Raw-finish aluminium 1 Pc

IBT7030/10 Profiles for fixed walls 82x55x2998 mm - wall thickness from 67 to 85mm Raw-finish aluminium 1 Pc

IBT70/10 Profiles for fixed walls 82x55x6000 mm - wall thickness from 67 to 85mm Raw-finish aluminium 1 Pc

IBT10015/97 Profiles for fixed walls 101x55x1497 mm - wall thickness from 86 to 104mm Matt aluminium 1 Pc

IBT10030/97 Profiles for fixed walls 101x55x2998 mm - wall thickness from 86 to 104mm Matt aluminium 1 Pc

IBT100/97 Profiles for fixed walls 101x55x6000 mm - wall thickness from 86 to 104mm Matt aluminium 1 Pc

IBT10015/88 Profiles for fixed walls 101x55x1497 mm - wall thickness from 86 to 104mm Brushed steel-effect aluminium 1 Pc

IBT10030/88 Profiles for fixed walls 101x55x2998 mm - wall thickness from 86 to 104mm Brushed steel-effect aluminium 1 Pc

IBT100/88 Profiles for fixed walls 101x55x6000 mm - wall thickness from 86 to 104mm Brushed steel-effect aluminium 1 Pc

IBT10015/10 Profiles for fixed walls 101x55x1497 mm - wall thickness from 86 to 104mm Raw-finish aluminium 1 Pc

IBT10030/10 Profiles for fixed walls 101x55x2998 mm - wall thickness from 86 to 104mm Raw-finish aluminium 1 Pc

IBT100/10 Profiles for fixed walls 101x55x6000 mm - wall thickness from 86 to 104mm Raw-finish aluminium 1 Pc

IBT9014515/97 Profiles for fixed walls 118x65x1497 mm - wall thickness from 90 to 145mm Matt aluminium 1 Pc

IBT9014530/97 Profiles for fixed walls 118x65x2998 mm - wall thickness from 90 to 145mm Matt aluminium 1 Pc

IBT90145/97 Profiles for fixed walls 118x65x6000 mm - wall thickness from 90 to 145mm Matt aluminium 1 Pc

IBT9014515/88 Profiles for fixed walls 118x65x1497 mm - wall thickness from 90 to 145mm Brushed steel-effect aluminium 1 Pc

IBT9014530/88 Profiles for fixed walls 118x65x2998 mm - wall thickness from 90 to 145mm Brushed steel-effect aluminium 1 Pc

IBT90145/88 Profiles for fixed walls 118x65x6000 mm - wall thickness from 90 to 145mm Brushed steel-effect aluminium 1 Pc

IBT9014515/10 Profiles for fixed walls 118x65x1497 mm - wall thickness from 90 to 145mm Raw-finish aluminium 1 Pc

IBT9014530/10 Profiles for fixed walls 118x65x2998 mm - wall thickness from 90 to 145mm Raw-finish aluminium 1 Pc

IBT90145/10 Profiles for fixed walls 118x65x6000 mm - wall thickness from 90 to 145mm Raw-finish aluminium 1 Pc

IBTCUT Custom calculation and cutting for making a door 1 Pc

PD001/9 AISI 304 steel bracket for joining profiles, with fixing grub screws, pack. 4 pcs Raw-finish stainless steel 1 Set

PD003/9 AISI 304 steel bracket for profile alignment, with fixing grub screws, pack. 4 pcs Raw-finish stainless steel 1 Set

PD12 Door stop gasket for glass thicknesses 11.52-13.52 mm Grey Per m

PD8A Door stop gasket for glass thicknesses 8-10.76 mm Grey Per m

PD12250 Door stop gasket for glass thicknesses 11.52-13.52 mm - 250 m roll Grey 1 Set

PD8A160 Door stop gasket for glass thicknesses 8-10.76 mm - 160 m roll Grey 1 Set

SYSTEMS FOR GLASS PARTITIONS

Page 36

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 209/213 >>>

8,55

8,55

5,02

9,01

9,01

0,73

293,10

46,76

113,31

216,58

413,09

128,44

246,84

473,60

81,46

152,88

285,68

121,40

232,76

445,45

138,85

267,66

515,25

88,68

167,33

314,58

142,50

274,96

529,86

163,20

316,36

612,65

105,38

200,72

381,37

91,24

31,18

23,96

1,00

5,99

250,90

957,99

SYSTEMS FOR GLASS PARTITIONS

Page 37 >>> CATALOGUE REFERENCE PAGE 213/219 >>>

PD8 Door stop gasket for glass thicknesses 8-10.76 mm Grey Per m

PD8300 Door strike gasket for glass thicknesses 8-10.76 mm - 300 m roll Grey 1 Set

IMBOTTE SERIES 90145 - DOORS KIT FOR INSTALLING GLASS DOORS ON FIXED WALLS

IMBKIT70-8/97 Glass thickness from 8 to 10.76mm - wall thickness from 67 to 85mm Matt aluminium 1 Kit

IMBKIT70-8/88 Glass thickness from 8 to 10.76mm - wall thickness from 67 to 85mm Brushed steel-effect aluminium 1 Kit

IMBKIT70-12/97 Glass thickness from 11.52 to 13.52mm - wall thickness from 67 to 85mm Matt aluminium 1 Kit

IMBKIT70-12/88 Glass thickness from 11.52 to 13.52mm - wall thickness from 67 to 85mm Brushed steel-effect aluminium 1 Kit

IMBKIT100-8/97 Glass thickness from 8 to 10.76mm - wall thickness from 86 to 104mm Matt aluminium 1 Kit

IMBKIT100-8/88 Glass thickness from 8 to 10.76mm - wall thickness from 86 to 104mm Brushed steel-effect aluminium 1 Kit

IMBKIT100-12/97 Glass thickness from 11.52 to 13.52mm - wall thickness from 86 to 104mm Matt aluminium 1 Kit

IMBKIT100-12/88 Glass thickness from 11.52 to 13.52mm - wall thickness from 86 to 104mm Brushed steel-effect aluminium 1 Kit

IMBKIT8/97 Glass thickness from 8 to 10.76mm - wall thickness from 107 to 145mm Matt aluminium 1 Kit

IMBKIT8/88 Glass thickness from 8 to 10.76mm - wall thickness from 107 to 145mm Brushed steel-effect aluminium 1 Kit

IMBKIT12/97 Glass thickness from 11.52 to 13.52mm - wall thickness from 107 to 145mm Matt aluminium 1 Kit

IMBKIT12/88 Glass thickness from 11.52 to 13.52mm - wall thickness from 107 to 145mm Brushed steel-effect aluminium 1 Kit

IMBKIT128/97 Glass thickness from 8 to 10.76mm - wall thickness from 97 to 133mm Matt aluminium 1 Kit

IMBKIT128/88 Glass thickness from 8 to 10.76mm - wall thickness from 97 to 133mm Brushed steel-effect aluminium 1 Kit

IMBKIT1212/97 Glass thickness from 11.52 to 13.52mm - wall thickness from 97 to 133mm Matt aluminium 1 Kit

IMBKIT1212/88 Glass thickness from 11.52 to 13.52mm - wall thickness from 97 to 133mm Brushed steel-effect aluminium 1 Kit

IMBKIT88/97 Glass thickness from 8 to 10.76mm - wall thickness from 90 to 125mm Matt aluminium 1 Kit

IMBKIT88/88 Glass thickness from 8 to 10.76mm - wall thickness from 90 to 125mm Brushed steel-effect aluminium 1 Kit

IMBKIT812/97 Glass thickness from 11.52 to 13.52mm - wall thickness from 90 to 125mm Matt aluminium 1 Kit

IMBKIT812/88 Glass thickness from 11.52 to 13.52mm - wall thickness from 90 to 125mm Brushed steel-effect aluminium 1 Kit

IMBOTTE SERIES INTERIOR DOOR-OPENING AND FRAME

IMB254415/97 L-shaped intrados profile for interior door-opening, 24.5 x 43.5 x 1497 mm Matt aluminium 1 Pc

IMB254430/97 L-shaped intrados profile for interior door-opening, 24.5 x 43.5 x 2998 mm Matt aluminium 1 Pc

IMB2544/97 L-shaped intrados profile for interior door-opening, 24.5 x 43.5 x 6000 mm Matt aluminium 1 Pc

IMB254415/10 L-shaped intrados profile for interior door-opening, 24.5 x 43.5 x 1497 mm Raw-finish aluminium 1 Pc

IMB254430/10 L-shaped intrados profile for interior door-opening, 24.5 x 43.5 x 2998 mm Raw-finish aluminium 1 Pc

IMB2544/10 L-shaped intrados profile for interior door-opening, 24.5 x 43.5 x 6000 mm Raw-finish aluminium 1 Pc

IMB434415/97 Z-shaped intrados profile with frame, 43 x 44 x 1497 mm Matt aluminium 1 Pc

IMB434430/97 Z-shaped intrados profile with frame, 43 x 44 x 2998 mm Matt aluminium 1 Pc

IMB4344/97 Z-shaped intrados profile with frame, 43 x 44 x 6000 mm Matt aluminium 1 Pc

IMB434415/10 Z-shaped intrados profile with frame, 43 x 44 x 1497 mm Raw-finish aluminium 1 Pc

IMB434430/10 Z-shaped intrados profile with frame, 43 x 44 x 2998 mm Raw-finish aluminium 1 Pc

IMB4344/10 Z-shaped intrados profile with frame, 43 x 44 x 6000 mm Raw-finish aluminium 1 Pc

IMBCUT Custom calculation and cutting for making a door 1 Pc

PD001/9 AISI 304 steel bracket for joining profiles, Raw-finish stainless steel 1 Set

with fixing grub screws, pack. 4 pcs

PD002/6 Plastic bracket for profile alignment, 4-pc pack Black 1 Set

IMBG Intrados gasket for door stop on doorjamb Grey Per m

IMBG250 Intrados gasket for door stop on doorjamb - 250 m roll Grey 1 Set

Art. Description Finish Q.ty EURO

97/133

67/85 - 86/104 - 107/145

90/125

IMBKIT812

IMBKIT88

IMBKIT1212

IMBKIT128

IMBKIT12

IMBKIT8

97/133

67/85 - 86/104 - 107/145

90/125

IMBKIT812

IMBKIT88

IMBKIT1212

IMBKIT128

IMBKIT12

IMBKIT8

97/133

67/85 - 86/104 - 107/145

90/125

IMBKIT812

IMBKIT88

IMBKIT1212

IMBKIT128

IMBKIT12

IMBKIT8

2,13

639,80

629,87

690,39

599,97

660,49

662,24

732,04

632,34

702,14

746,64

829,44

716,74

799,54

758,69

841,49

728,78

811,58

818,49

901,29

788,59

871,39

48,79

86,18

149,55

37,59

63,77

104,73

61,02

110,64

198,47

46,15

80,90

138,99

45,62

31,18

5,77

2,62

655,77

IMBKIT2250/97 Kit consisting of APRO2203 lock and pair of FA50 hinges Matt aluminium 1 Kit

GLASS PARTITIONS - POLYCARBONATE PROFILES WITH TESA ACXPLUS

●PH50508 2-way in-line polycarbonate profile - 8 mm glass L. 3000mm Transparent 1 Pc

●PH50510 2-way in-line polycarbonate profile - 10 mm glass L. 3000mm Transparent 1 Pc

●PH50511 2-way in-line polycarbonate profile - 5+5+1.52 mm glass L. 3000mm Transparent 1 Pc

●PH50512 2-way in-line polycarbonate profile - 12 mm glass L. 3000mm Transparent 1 Pc

●PH9113 2-way in-line polycarbonate profile - 6+6+1.52 mm glass L. 3000mm Transparent 1 Pc

●PH9117 2-way in-line polycarbonate profile - 8+8+1.52 mm glass L. 3000mm Transparent 1 Pc

●PH9121 2-way in-line polycarbonate profile - 10+10+1.52 mm glass L. 3000mm Transparent 1 Pc

GLASS PARTITIONS - POLYCARBONATE PROFILES WITH VHB

●PH2818 2-way in-line polycarbonate profiles with VHB 10 x 6.7 L. 3000mm Transparent 1 Pc

●PH2784 2-way in-line polycarbonate profiles with VHB 11.5 x 7 L. 3000mm Transparent 1 Pc

●PH2827 2-way in-line polycarbonate profiles with VHB 12 x 6.5 L. 3000mm Transparent 1 Pc

●PH2819 90° polycarbonate profiles with VHB 12 x 12 L. 3000mm Transparent 1 Pc

●PH2792 90° polycarbonate profiles with VHB 12 x 12 L. 3000mm Transparent 1 Pc

●PH2828 90° polycarbonate profiles with VHB 14 x 14 L. 3000mm Transparent 1 Pc

●PH2826 3-way polycarbonate profiles with VHB 10 x 14 L. 3000mm Transparent 1 Pc

●PH2790 3-way polycarbonate profiles with VHB 11.5 x 12.6 L. 3000mm Transparent 1 Pc

●PH2829 3-way polycarbonate profiles with VHB 12 x 15 L. 3000mm Transparent 1 Pc

GLASS PARTITIONS - LOAD BEARING PROFILES

R7170/97 Profile for load bearing systems 40x40 Length 3000mm Matt aluminium 1 Pc

R7170/88 Profile for load bearing systems 40x40 Length 3000mm Brushed steel-effect aluminium 1 Pc

R7170FORO On request M10x30 hole 1 Pc

R7166/97 Profile for load bearing systems 40x25 Length 3000mm Matt aluminium 1 Pc

R7166/88 Profile for load bearing systems 40x25 Length 3000mm Brushed steel-effect aluminium 1 Pc

R7170FORO On request M10x30 hole 1 Pc

R7166FORO On request through Ø7mm hole 1 Pc

RMA1373/9 Ball slider with one-hole ring nut MA1373 Machined steel (CNC) 1 Pc

RMA1319/10 Connection U-bolt MA 1319 for transom Raw-finish aluminium 1 Pc

●R7150/97 Finishing profile for R7170 and R7166 Matt aluminium 1 Pc

●R7150/88 Finishing profile for R7170 and R7166 Brushed steel-effect aluminium 1 Pc

RMA1382/6 Articulated foot RMA 1382 Black 1 Pc

RMA1390/9 Plate for anchoring to the ceiling RMA 1390 Machined steel (CNC) 1 Pc

SYSTEMS FOR GLASS PARTITIONS

Page 38

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 220/231 >>>

261,27

20,19

20,53

22,96

23,52

40,27

37,45

38,20

31,70

32,32

33,25

34,87

35,57

35,57

45,74

46,83

46,83

186,30

212,11

27,37

101,62

115,73

27,37

35,92

17,28

14,83

12,60

13,00

4,56

26,28

SYSTEMS FOR GLASS PARTITIONS

Page 39 >>> CATALOGUE REFERENCE PAGE 233/239 >>>

GLASS PARTITIONS - ELEKTRA SERIES

ELEKTRA436/8 360° Elektra 4 with adjustment slots Brushed steel 1 Pc

ELEKTRA436/15 360° Elektra 4 with adjustment slots Polished steel 1 Pc

ELEK436/8 360° Elektra 4 bracket only Brushed steel 1 Pc

ELEK436/15 360° Elektra 4 bracket only Polished steel 1 Pc

ELEKTRA218/8 180° Elektra 2 with adjustment slots Brushed steel 1 Pc

ELEKTRA218/15 180° Elektra 2 with adjustment slots Polished steel 1 Pc

ELEK218/8 180° Elektra 2 bracket only Brushed steel 1 Pc

ELEK218/15 180° Elektra 2 bracket only Polished steel 1 Pc

ELEKTRA290/8 90° Elektra 2 with adjustment slots Brushed steel 1 Pc

ELEKTRA290/15 90° Elektra 2 with adjustment slots Polished steel 1 Pc

ELEK290/8 90° Elektra 2 bracket only Brushed steel 1 Pc

ELEK290/15 90° Elektra 2 bracket only Polished steel 1 Pc

ELEKTRA100/8 Elektra 1 with adjustment slots Brushed steel 1 Pc

ELEKTRA100/15 Elektra 1 with adjustment slots Polished steel 1 Pc

ELEK100/8 Elektra 1 bracket only Brushed steel 1 Pc

ELEK100/15 Elektra 1 bracket only Polished steel 1 Pc

ELEKTRA390/8 90° Elektra 3 with adjustment slots Brushed steel 1 Pc

ELEKTRA390/15 90° Elektra 3 with adjustment slots Polished steel 1 Pc

ELEK390/8 90° Elektra 3 bracket only Brushed steel 1 Pc

ELEK390/15 90° Elektra 3 bracket only Polished steel 1 Pc

FIXBORK

FIXBORK1/9 Fixbork Ø 35 mm x M8 Machined steel (CNC) 1 Pc

FIXGHIERA8/9 Ring nut Ø 30 mm x M8 Machined steel (CNC) 1 Pc

FIXGHIERA10/9 Ring nut Ø 30 mm x M10 Machined steel (CNC) 1 Pc

SPIDER HAND SERIES

SPH100/15 4-way Spider Hand - AISI 304 Polished steel 1 Pc

SPH102/15 2-way in line Spider Hand - AISI 304 Polished steel 1 Pc

SPH104/15 90° 2-way Spider Hand - AISI 304 Polished steel 1 Pc

SPH106/15 1-way in-line Spider Hand - AISI 304 Polished steel 1 Pc

SPH108/15 45° 1-way Spider Hand- AISI 304 Polished steel 1 Pc

SPH110/15 3-way Spider Hand - AISI 304 Polished steel 1 Pc

SPH114/9 Point coupling Ø 30 mm - AISI 304 Machined steel (CNC) 1 Pc

SPH112/9 Spider Hand connector - AISI 304 Machined steel (CNC) 1 Pc

Art. Description Finish Q.ty EURO

188,15

195,61

75,80

83,26

102,86

107,00

46,68

50,83

104,63

110,43

48,45

54,25

62,45

64,94

34,36

36,85

150,12

157,08

65,85

72,82

21,98

6,11

6,44

29,75

12,38

15,99

7,99

9,94

18,87

7,22

5,88

POINT FIXINGS

CON712B/9 Fixed point fixing with flat stud Machined steel (CNC) 1 Pc

SINGLE-POINT FIXINGS WITH JOINFIX

IG500TP/9 Point fixing for panes anchored to the ground via flat head screw Machined steel (CNC) 1 Pc

IG500/9 Only body IG500 Machined steel (CNC) 1 Pc

IG650TP/9 Point fixing for panes with 0° to 110° articulated body via flat head screw Machined steel (CNC) 1 Pc

IG650/9 Only body IG650 Machined steel (CNC) 1 Pc

IG600TP/9 Point fixing for panes with in-line body via flat head screw Machined steel (CNC) 1 Pc

IG600/9 Only body IG600 Machined steel (CNC) 1 Pc

IG750TP/9 Point fixing for panes with glass application via flat head screw Machined steel (CNC) 1 Pc

IG750/9 Only body IG750 Machined steel (CNC) 1 Pc

IG850TP/9 Point fixing for panes with glass application via flat screw Machined steel (CNC) 1 Pc

IG850/9 Only body IG850 Machined steel (CNC) 1 Pc

JOFAG/9 JOINFIX level Machined steel (CNC) 1 Pc

ARTICULATED POINT FIXINGS

CON3075B/9 Wall/glass point fixing with studded connector Machined steel (CNC) 1 Pc

CON1052B/9 Wall/glass point fixing with 52 mm double joint studded connector Machined steel (CNC) 1 Pc

CON1072B/9 Wall/glass point fixing with 72 mm double joint studded connector Machined steel (CNC) 1 Pc

CON1102B/9 Wall/glass point fixing with 102 mm double joint studded connector Machined steel (CNC) 1 Pc

CON2052B/9 Glass/glass point fixing with 52 mm double joint studded connector Machined steel (CNC) 1 Pc

CON2072B/9 Glass/glass point fixing with 72 mm double joint studded connector Machined steel (CNC) 1 Pc

CON2102B/9 Glass/glass point fixing with 102 mm double joint studded connector Machined steel (CNC) 1 Pc

CON4104B/9 Double point fixing with application on glass and studded connectors Machined steel (CNC) 1 Pc

GLASS HOLDER AND POINT FIXINGS

Page 40

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 242/247 >>>

62,79

151,89

92,62

277,74

159,20

162,12

43,58

266,59

148,05

160,52

101,25

59,27

113,39

102,79

121,80

135,49

108,12

110,85

123,63

197,53

GLASS HOLDER AND POINT FIXINGS

Page 41 >>> CATALOGUE REFERENCE PAGE 248/251 >>>

DOMINO SERIES SPECIAL FITTINGS

DOM3VCF2/8 DOMINO 3 way fitting with 3 COFIS40 Brushed steel 1 Pc

DOM3VCF3/8 DOMINO 3 way fitting with 3 COFIS30 Brushed steel 1 Pc

DOM3V/8 DOMINO 3 way fitting bracket only Brushed steel 1 Pc

DOM90CF2/8 DOMINO 90° fitting with 2 COFIS40 Brushed steel 1 Pc

DOM90CF3/8 DOMINO 90° fitting with 2 COFIS30 Brushed steel 1 Pc

DOM90/8 DOMINO 90° fitting bracket only Brushed steel 1 Pc

DOMLINCF2/8 DOMINO fitting in-line with 2 COFIS40 Brushed steel 1 Pc

DOMLINCF3/8 DOMINO fitting in-line with 2 COFIS30 Brushed steel 1 Pc

DOMLIN/8 DOMINO fitting in-line bracket only Brushed steel 1 Pc

DOMANGCF2/8 DOMINO fitting angular with 2 COFIS40 Brushed steel 1 Pc

DOMANGCF3/8 DOMINO fitting angular with 2 COFIS30 Brushed steel 1 Pc

DOMANG/8 DOMINO fitting angular bracket only Brushed steel 1 Pc

COFIS20 SERIES SPECIAL FITTINGS

ATT3VCF5/8 3-way glass holder fitting with 3 COFIS20 Brushed steel 1 Pc

ATT3V/8 3-way glass holder fitting bracket only Brushed steel 1 Pc

ATT90CF5/8 Glass holder 90° fitting with 2 COFIS20 Brushed steel 1 Pc

ATT90/8 Glass holder 90° fitting bracket only Brushed steel 1 Pc

ATTLINCF5/8 Glass holder line fitting with 2 COFIS20 Brushed steel 1 Pc

ATTLIN/8 Glass holder line fitting bracket only Brushed steel 1 Pc

ATTANGCF5/8 Glass holder corner fitting with 1 COFIS20 Brushed steel 1 Pc

ATTANG/8 Glass holder corner fitting bracket only Brushed steel 1 Pc

ETOILE SERIES GLASS HOLDERS

SPC415/9 Wall/glass glass holder with ETOILE series flap Ø 30 x H 50 mm Machined steel (CNC) 1 Pc

SPC420/9 Glass/glass glass holder in-line ETOILE series Ø 30 x H 100 mm Machined steel (CNC) 1 Pc

SPC419/9 Glass/glass 90° glass holder ETOILE series Ø 30 x P 51 x L 51 mm Machined steel (CNC) 1 Pc

Art. Description Finish Q.ty EURO

138,16

129,90

49,02

88,16

82,65

28,74

84,67

79,16

25,25

65,14

62,38

27,14

98,56

29,31

65,69

21,21

61,43

20,98

48,13

18,07

30,73

45,57

48,22

SUPPORTS FOR STEPS

SUPGR01/15 Support for steps H 72.5 L 122.5 mm Polished steel 1 Set

SUPGR01/8 Support for steps H 72.5 L 122.5 mm Brushed steel 1 Set

SUPGR03/9 Fixing stud on glass wall Ø 45 mm neck 16.5 mm Machined steel (CNC) 1 Pc

COFIS20A/9 20 fixing connector with aluminium gasket Machined steel (CNC) 1 Pc

COFIS30A/9 30 fixing connector with aluminium gasket Machined steel (CNC) 1 Pc

MDSCA38/9 Fixing stud for adjustable glass steps for glass 16/30 Machined steel (CNC) 1 Pc

STEEL GLASS HOLDERS - STEEL TRAPEZIUM GLASS HOLDERS

MA401/15 MA401 trapezium glass holder for glass 10/13.5 mm H 60 x 40 mm Polished steel 1 Pc

MA401/8 MA401 trapezium glass holder for glass 10/13.5 mm H 60 x 40 mm Brushed steel 1 Pc

STEEL TRIANGLE GLASS HOLDERS

MA501/15 MA501 triangle glass holder for glass 10/13.5 mm H 54 x 60 mm Polished steel 1 Pc

MA501/8 MA501 triangle glass holder for glass 10/13.5 mm H 54 x 60 mm Brushed steel 1 Pc

STEEL GLASS CLAMPS

MBLOK90L/15 AISI 304 steel 90° glass clamp BLOK90-LIGHT Polished steel 1 Pc

without glass cut-out 8/12 L 60+60 x H 40 mm

MBLOK90L/8 AISI 304 steel 90° glass clamp BLOK90-LIGHT Brushed steel 1 Pc

without glass cut-out 8/12 L 60+60 x H 40 mm

MBLOK180L/15 AISI 304 steel 180° glass clamp BLOK180-LIGHT Polished steel 1 Pc

with or without glass cut-out 8/12 L 100 x H 40 mm

MBLOK180L/8 AISI 304 steel 180° glass clamp BLOK180-LIGHT Brushed steel 1 Pc

with or without glass cut-out 8/12 L 100 x H 40 mm

GLASS HOLDER AND POINT FIXINGS

Page 42

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 253/257 >>>

82,98

83,03

31,23

14,14

18,02

76,27

36,54

34,16

37,98

35,67

58,25

53,69

52,12

46,24

GLASS HOLDER AND POINT FIXINGS

Page 43 >>> CATALOGUE REFERENCE PAGE 258/259 >>>

BRASS RECTANGULAR CLAMPS

MRET007/1 Rectangular clamp H 60 x L 80 mm internal 25 mm Chrome 1 Pc

MRET007/2 Rectangular clamp H 60 x L 80 mm internal 25 mm Gold 1 Pc

MRET007/3 Rectangular clamp H 60 x L 80 mm internal 25 mm Brushed nickel 1 Pc

MRET006/1 Rectangular clamp H 60 x L 80 mm internal 21 mm Chrome 1 Pc

MRET006/2 Rectangular clamp H 60 x L 80 mm internal 21 mm Gold 1 Pc

MRET006/3 Rectangular clamp H 60 x L 80 mm internal 21 mm Brushed nickel 1 Pc

MREC006DX/1 Right closed rectangular clamp H 60 x L 80 mm internal 21 mm Chrome 1 Pc

MREC006DX/2 Right closed rectangular clamp H 60 x L 80 mm internal 21 mm Gold 1 Pc

MREC006DX/3 Right closed rectangular clamp H 60 x L 80 mm internal 21 mm Brushed nickel 1 Pc

MREC006SX/1 Left closed rectangular clamp H 60 x L 80 mm internal 21 mm Chrome 1 Pc

MREC006SX/2 Left closed rectangular clamp H 60 x L 80 mm internal 21 mm Gold 1 Pc

MREC006SX/3 Left closed rectangular clamp H 60 x L 80 mm internal 21 mm Brushed nickel 1 Pc

MRET005/1 Rectangular clamp H 50 x L 70 mm internal 17 mm Chrome 1 Pc

MRET005/2 Rectangular clamp H 50 x L 70 mm internal 17 mm Gold 1 Pc

MRET005/3 Rectangular clamp H 50 x L 70 mm internal 17 mm Brushed nickel 1 Pc

MREC005DX/1 Right closed rectangular clamp H 50 x L 70 mm internal 17 mm Chrome 1 Pc

MREC005DX/2 Right closed rectangular clamp H 50 x L 70 mm internal 17 mm Gold 1 Pc

MREC005DX/3 Right closed rectangular clamp H 50 x L 70 mm internal 17 mm Brushed nickel 1 Pc

MREC005SX/1 Left closed rectangular clamp H 50 x L 70 mm internal 17 mm Chrome 1 Pc

MREC005SX/2 Left closed rectangular clamp H 50 x L 70 mm internal 17 mm Gold 1 Pc

MREC005SX/3 Left closed rectangular clamp H 50 x L 70 mm internal 17 mm Brushed nickel 1 Pc

MRET004/1 Rectangular clamp H 50 x L 60 mm internal 14 mm Chrome 1 Pc

MRET004/2 Rectangular clamp H 50 x L 60 mm internal 14 mm Gold 1 Pc

MRET004/3 Rectangular clamp H 50 x L 60 mm internal 14 mm Brushed nickel 1 Pc

MREC004DX/1 Right closed rectangular clamp H 50 x L 60 mm internal 14 mm Chrome 1 Pc

MREC004DX/2 Right closed rectangular clamp H 50 x L 60 mm internal 14 mm Gold 1 Pc

MREC004DX/3 Right closed rectangular clamp H 50 x L 60 mm internal 14 mm Brushed nickel 1 Pc

MREC004SX/1 Left closed rectangular clamp H 50 x L 60 mm internal 14 mm Chrome 1 Pc

MREC004SX/2 Left closed rectangular clamp H 50 x L 60 mm internal 14 mm Gold 1 Pc

MREC004SX/3 Left closed rectangular clamp H 50 x L 60 mm internal 14 mm Brushed nickel 1 Pc

MRET003/1 Rectangular clamp H 50 x L 70 mm internal 12 mm Chrome 1 Pc

MRET003/2 Rectangular clamp H 50 x L 70 mm internal 12 mm Gold 1 Pc

MRET003/3 Rectangular clamp H 50 x L 70 mm internal 12 mm Brushed nickel 1 Pc

MREC003DX/1 Right closed rectangular clamp H 50 x L 70 mm internal 12 mm Chrome 1 Pc

MREC003DX/2 Right closed rectangular clamp H 50 x L 70 mm internal 12 mm Gold 1 Pc

MREC003DX/3 Right closed rectangular clamp H 50 x L 70 mm internal 12 mm Brushed nickel 1 Pc

MREC003SX/1 Left closed rectangular clamp H 50 x L 70 mm internal 12 mm Chrome 1 Pc

MREC003SX/2 Left closed rectangular clamp H 50 x L 70 mm internal 12 mm Gold 1 Pc

MREC003SX/3 Left closed rectangular clamp H 50 x L 70 mm internal 12 mm Brushed nickel 1 Pc

Art. Description Finish Q.ty EURO

54,03

70,90

61,02

51,91

71,48

58,20

62,34

82,69

63,30

62,34

82,69

63,30

48,43

65,35

54,04

57,10

70,10

58,04

57,10

70,10

58,04

37,48

50,50

43,64

44,38

54,94

51,40

44,38

54,94

51,40

43,34

56,56

48,55

51,67

68,17

54,21

51,67

67,89

54,21

MRET008/1 Rectangular clamp for tubular H 38/45 H 50 x L 60 mm internal 14 mm Chrome 1 Pc

MRET008/2 Rectangular clamp for tubular H 38/45 H 50 x L 60 mm internal 14 mm Gold 1 Pc

MRET008/3 Rectangular clamp for tubular H 38/45 H 50 x L 60 mm internal 14 mm Brushed nickel 1 Pc

MRET0027/1 Rectangular clamp H 35 x L 40 mm internal 13 mm Chrome 1 Pc

MRET0027/2 Rectangular clamp H 35 x L 40 mm internal 13 mm Gold 1 Pc

MRET0027/3 Rectangular clamp H 35 x L 40 mm internal 13 mm Brushed nickel 1 Pc

MRET0023/1 Rectangular clamp H 35 x L 40 mm internal 11 mm Chrome 1 Pc

MRET0023/2 Rectangular clamp H 35 x L 40 mm internal 11 mm Gold 1 Pc

MRET0023/3 Rectangular clamp H 35 x L 40 mm internal 11 mm Brushed nickel 1 Pc

MRET002/1 Rectangular clamp H 30 x L 40 mm internal 10 mm Chrome 1 Pc

MRET002/2 Rectangular clamp H 30 x L 40 mm internal 10 mm Gold 1 Pc

MRET002/3 Rectangular clamp H 30 x L 40 mm internal 10 mm Brushed nickel 1 Pc

MRET001/1 Rectangular clamp H 25 x L 40 mm internal 8 mm Chrome 1 Pc

MRET001/2 Rectangular clamp H 25 x L 40 mm internal 8 mm Gold 1 Pc

MRET001/3 Rectangular clamp H 25 x L 40 mm internal 8 mm Brushed nickel 1 Pc

MRET010DX/1 Right open 30° rectangular clamp H 40 x L 60 mm internal 14 mm Chrome 1 Pc

MRET010DX/2 Right open 30° rectangular clamp H 40 x L 60 mm internal 14 mm Gold 1 Pc

MRET010DX/3 Right open 30° rectangular clamp H 40 x L 60 mm internal 14 mm Brushed nickel 1 Pc

MRET010SX/1 Left open 30° rectangular clamp H 40 x L 60 mm internal 14 mm Chrome 1 Pc

MRET010SX/2 Left open 30° rectangular clamp H 40 x L 60 mm internal 14 mm Gold 1 Pc

MRET010SX/3 Left open 30° rectangular clamp H 40 x L 60 mm internal 14 mm Brushed nickel 1 Pc

MRET011DX/1 Right short side closed 30° rectangular clamp H 40 x L 60 mm internal 14 mm Chrome 1 Pc

MRET011DX/2 Right short side closed 30° rectangular clamp H 40 x L 60 mm internal 14 mm Gold 1 Pc

MRET011DX/3 Right short side closed 30° rectangular clamp H 40 x L 60 mm internal 14 mm Brushed nickel 1 Pc

MRET011SX/1 Left short side closed 30° rectangular clamp H 40 x L 60 mm internal 14 mm Chrome 1 Pc

MRET011SX/2 Left short side closed 30° rectangular clamp H 40 x L 60 mm internal 14 mm Gold 1 Pc

MRET011SX/3 Left short side closed 30° rectangular clamp H 40 x L 60 mm internal 14 mm Brushed nickel 1 Pc

MRET009DX/1 Right long side closed 30° rectangular clamp H 40 x L 60 mm internal 14 mm Chrome 1 Pc

MRET009DX/2 Right long side closed 30° rectangular clamp H 40 x L 60 mm internal 14 mm Gold 1 Pc

MRET009DX/3 Right long side closed 30° rectangular clamp H 40 x L 60 mm internal 14 mm Brushed nickel 1 Pc

MRET009SX/1 Left long side closed 30° rectangular clamp H 40 x L 60 mm internal 14 mm Chrome 1 Pc

MRET009SX/2 Left long side closed 30° rectangular clamp H 40 x L 60 mm internal 14 mm Gold 1 Pc

MRET009SX/3 Left long side closed 30° rectangular clamp H 40 x L 60 mm internal 14 mm Brushed nickel 1 Pc

BRASS TRIANGLE GLASS HOLDERS

MA21/1 MA21 triangle glass holder for glass 17.5/19 mm H 77 x 50 mm Chrome 1 Pc

MA21/3 MA21 triangle glass holder for glass 17.5/19 mm H 77 x 50 mm Brushed nickel 1 Pc

MA17/1 MA17 triangle glass holder for glass 13/15 mm H 77 x 50 mm Chrome 1 Pc

MA17/3 MA17 triangle glass holder for glass 13/15 mm H 77 x 50 mm Brushed nickel 1 Pc

MA14/1 MA14 triangle glass holder for glass 10/12 mm H 60 x 40 mm Chrome 1 Pc

MA14/3 MA14 triangle glass holder for glass 10/12 mm H 60 x 40 mm Brushed nickel 1 Pc

MA12/1 MA12 triangle glass holder for glass 8 mm H 60 x 40 mm Chrome 1 Pc

MA12/3 MA12 triangle glass holder for glass 8 mm H 60 x 40 mm Brushed nickel 1 Pc

GLASS HOLDER AND POINT FIXINGS

Page 44

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 259/262 >>>

53,38

59,30

56,07

26,03

31,73

30,25

27,80

32,34

32,01

23,50

30,77

29,25

20,54

29,64

25,45

52,84

59,30

55,53

52,84

59,30

55,53

52,84

59,30

55,53

52,84

59,30

55,53

57,03

63,50

59,72

57,03

63,50

59,72

75,44

75,44

69,62

69,62

42,97

42,97

42,34

42,34

GLASS HOLDER AND POINT FIXINGS

Page 45 >>> CATALOGUE REFERENCE PAGE 264/268 >>>

BRASS CLAMPS WITHOUT VISIBLE SCREWS - 612 SERIES

MFV68/1 Glass holder clamp without visible screws and no hole in the glass H 25 x L 35 mm Chrome 1 Pc

MFV68/3 Glass holder clamp without visible screws and no hole in the glass H 25 x L 35 mm Brushed nickel 1 Pc

MFV810/1 Glass holder clamp without visible screws and no hole in the glass H 30 x L 50 mm Chrome 1 Pc

MFV810/3 Glass holder clamp without visible screws and no hole in the glass H 30 x L 50 mm Brushed nickel 1 Pc

MFV1012/1 Glass holder clamp without visible screws and holes in the glass H 40 x L 60 mm Chrome 1 Pc

MFV1012/3 Glass holder clamp without visible screws and holes in the glass H 40 x L 60 mm Brushed nickel 1 Pc

ZAMAK FIXING CLAMPS

M4335Z/1 Fixing clamp 4335 L 55 x H 55 mm Chrome 1 Pc

M4335Z/7 Fixing clamp 4335 L 55 x H 55 mm Matt chrome 1 Pc

M4335Z40/1 Fixing clamp 4335 tubular 40 L 55 x H 64 mm Chrome 1 Pc

M4335Z40/7 Fixing clamp 4335 tubular 40 L 55 x H 64 mm Matt chrome 1 Pc

M4345Z/1 Fixing clamp 4345 L 40 x H 52 mm Chrome 1 Pc

M4345Z/7 Fixing clamp 4345 L 40 x H 52 mm Matt chrome 1 Pc

M4345Z30/1 Fixing clamp 4345 tubular 30 L 40 x H 61 mm Chrome 1 Pc

M4345Z30/7 Fixing clamp 4345 tubular 30 L 40 x H 61 mm Matt chrome 1 Pc

M4345Z40/1 Fixing clamp 4345 tubular 40 L 40 x H 61 mm Chrome 1 Pc

M4345Z40/7 Fixing clamp 4345 tubular 40 L 40 x H 61 mm Matt chrome 1 Pc

M4345Z60/1 Fixing clamp 4345 tubular 60 L 40 x H 61 mm Chrome 1 Pc

M4345Z60/7 Fixing clamp 4345 tubular 60 L 40 x H 61 mm Matt chrome 1 Pc

M4353Z/1 Fixing clamp 4353 L 40 x H 52 mm Chrome 1 Pc

M4353Z/7 Fixing clamp 4353 L 40 x H 52 mm Matt chrome 1 Pc

M4353Z30/1 Fixing clamp 4353 tubular 30 L 40 x H 63 mm Chrome 1 Pc

M4353Z30/7 Fixing clamp 4353 tubular 30 L 40 x H 63 mm Matt chrome 1 Pc

M4353Z40/1 Fixing clamp 4353 tubular 40 L 40 x H 61 mm Chrome 1 Pc

M4353Z40/7 Fixing clamp 4353 tubular 40 L 40 x H 61 mm Matt chrome 1 Pc

BRASS GLASS HOLDERS

FA7035/1 Rectangular glass holder 7035 L 70 x H 35 mm Chrome 1 Pc

FA7035/24 Rectangular glass holder 7035 L 70 x H 35 mm Brushed steel-effect 1 Pc

MA101/1 Rectangular glass holder L 35 x H 25 mm Chrome 1 Pc

MA101/2 Rectangular glass holder L 35 x H 25 mm Gold 1 Pc

MA101/24 Rectangular glass holder L 35 x H 25 mm Brushed steel-effect 1 Pc

MA102/1 Rectangular glass holder L 35 x H 25 mm Chrome 1 Pc

MA102/2 Rectangular glass holder L 35 x H 25 mm Gold 1 Pc

MA102/24 Rectangular glass holder L 35 x H 25 mm Brushed steel-effect 1 Pc

MA091/1 Semi-circle glass holder Ø50 x H 25 mm Chrome 1 Pc

MA091/2 Semi-circle glass holder Ø50 x H 25 mm Gold 1 Pc

MA091/24 Semi-circle glass holder Ø50 x H 25 mm Brushed steel-effect 1 Pc

MA092/1 Semi-circle glass holder Ø50 x H 25 mm Chrome 1 Pc

MA092/2 Semi-circle glass holder Ø50 x H 25 mm Gold 1 Pc

MA092/24 Semi-circle glass holder Ø50 x H 25 mm Brushed steel-effect 1 Pc

Art. Description Finish Q.ty EURO

19,87

19,87

26,55

26,55

45,21

45,21

18,08

19,35

19,28

20,30

14,44

15,55

16,22

17,24

16,61

17,24

16,46

17,54

15,19

16,22

16,78

17,83

16,64

17,66

32,21

34,46

24,26

30,87

28,38

24,24

30,88

28,37

23,06

23,50

27,18

23,06

24,51

27,18

STEEL ROUND GLASS HOLDERS

MA1945/15 AISI 304 steel round glass holder MA1945 open Ø 40 x 45 mm internal 20 mm Polished steel 1 Pc

MA1945/8 AISI 304 steel round glass holder MA1945 open Ø 40 x 45 mm internal 20 mm Brushed steel 1 Pc

MA1960/15 AISI 304 steel round glass holder MA1960 open Ø 40 x 60 mm internal 20 mm Polished steel 1 Pc

MA1960/8 AISI 304 steel round glass holder MA1960 open Ø 40 x 60 mm internal 20 mm Brushed steel 1 Pc

MA1540/15 AISI 304 steel round glass holder MA1540 open Ø 35 x 40 mm internal 16 mm Polished steel 1 Pc

MA1540/8 AISI 304 steel round glass holder MA1540 open Ø 35 x 40 mm internal 16 mm Brushed steel 1 Pc

MA1555/15 AISI 304 steel round glass holder MA1555 open Ø 35 x 55 mm internal 16 mm Polished steel 1 Pc

MA1555/8 AISI 304 steel round glass holder MA1555 open Ø 35 x 55 mm internal 16 mm Brushed steel 1 Pc

BRASS ROUND GLASS HOLDERS

MA084/1 Round glass holder MA084 open Ø 40 x 60 mm internal 17 mm Chrome 1 Pc

MA084/2 Round glass holder MA084 open Ø 40 x 60 mm internal 17 mm Gold 1 Pc

MA084/3 Round glass holder MA084 open Ø 40 x 60 mm internal 17 mm Brushed nickel 1 Pc

MA089/1 Round glass holder MA089 open Ø 35 x 40 mm internal 21 mm Chrome 1 Pc

MA089/2 Round glass holder MA089 open Ø 35 x 40 mm internal 21 mm Gold 1 Pc

MA089/3 Round glass holder MA089 open Ø 35 x 40 mm internal 21 mm Brushed nickel 1 Pc

MA08110/1 Round glass holder MA08110 open Ø 28 x 40 mm internal 12 mm Chrome 1 Pc

MA08110/2 Round glass holder MA08110 open Ø 28 x 40 mm internal 12 mm Gold 1 Pc

MA08110/3 Round glass holder MA08110 open Ø 28 x 40 mm internal 12 mm Brushed nickel 1 Pc

MA08110/4 Round glass holder MA08110 open Ø 28 x 40 mm internal 12 mm Bronze 1 Pc

MA08210/1 Round glass holder MA08210 open Ø 28 x 40 mm internal 10 mm Chrome 1 Pc

MA08210/2 Round glass holder MA08210 open Ø 28 x 40 mm internal 10 mm Gold 1 Pc

MA08210/3 Round glass holder MA08210 open Ø 28 x 40 mm internal 10 mm Brushed nickel 1 Pc

BRASS GLASS HOLDERS ROUND CLAMPS

MT016/1 Round clamp Ø 16 x 22 mm internal 6.5 mm Chrome 1 Pc

MT016/2 Round clamp Ø 16 x 22 mm internal 6.5 mm Gold 1 Pc

MT016/3 Round clamp Ø 16 x 22 mm internal 6.5 mm Brushed nickel 1 Pc

MT016/4 Round clamp Ø 16 x 22 mm internal 6.5 mm Bronze 1 Pc

MT001/1 Round clamp Ø 20 x 25 mm internal 11 mm Chrome 1 Pc

MT001/2 Round clamp Ø 20 x 25 mm internal 11 mm Gold 1 Pc

MT001/3 Round clamp Ø 20 x 25 mm internal 11 mm Brushed nickel 1 Pc

MT001/4 Round clamp Ø 20 x 25 mm internal 11 mm Bronze 1 Pc

MT021/1 Round clamp Ø 24 x 30 mm internal 13 mm Chrome 1 Pc

MT021/2 Round clamp Ø 24 x 30 mm internal 13 mm Gold 1 Pc

MT021/3 Round clamp Ø 24 x 30 mm internal 13 mm Brushed nickel 1 Pc

MT021/4 Round clamp Ø 24 x 30 mm internal 13 mm Bronze 1 Pc

MT031/1 Round clamp Ø 30 x 40 mm internal 17 mm Chrome 1 Pc

MT031/2 Round clamp Ø 30 x 40 mm internal 17 mm Gold 1 Pc

MT031/3 Round clamp Ø 30 x 40 mm internal 17 mm Brushed nickel 1 Pc

MT041/1 Round clamp Ø35 x 40 mm internal 20.5 mm Chrome 1 Pc

MT041/2 Round clamp Ø35 x 40 mm internal 20.5 mm Gold 1 Pc

MT041/3 Round clamp Ø35 x 40 mm internal 20.5 mm Brushed nickel 1 Pc

MT04122/1 Round clamp Ø 35 x 40 mm internal 22.5 mm Chrome 1 Pc

MT04122/2 Round clamp Ø 35 x 40 mm internal 22.5 mm Gold 1 Pc

MT04122/3 Round clamp Ø 35 x 40 mm internal 22.5 mm Brushed nickel 1 Pc

GLASS HOLDER AND POINT FIXINGS

Page 46

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE

33,69

32,08

45,33

42,96

28,69

27,55

34,89

32,86

38,28

44,43

40,20

25,73

30,07

27,66

24,52

33,30

24,98

29,99

25,15

25,32

25,15

5,61

8,67

6,79

7,35

6,14

8,67

7,46

7,59

9,04

12,55

10,59

10,95

17,57

22,76

20,80

22,52

29,64

24,31

21,71

30,06

26,41

GLASS HOLDER AND POINT FIXINGS

Page 47 >>> CATALOGUE REFERENCE PAGE

MT071/1 Round clamp Ø 30 mm internal 17 mm + M8 screw Chrome 1 Pc

MT071/2 Round clamp Ø 30 mm internal 17 mm + M8 screw Gold 1 Pc

MT071/3 Round clamp Ø 30 mm internal 17 mm + M8 screw Brushed nickel 1 Pc

MT061/1 Round clamp Ø 24 mm internal 13 mm + M6 screw Chrome 1 Pc

MT061/2 Round clamp Ø 24 mm internal 13 mm + M6 screw Gold 1 Pc

MT061/3 Round clamp Ø 24 mm internal 13 mm + M6 screw Brushed nickel 1 Pc

MT051/1 Round clamp Ø 20 mm internal 11 mm + M6 screw Chrome 1 Pc

MT051/2 Round clamp Ø 20 mm internal 11 mm + M6 screw Gold 1 Pc

MT051/3 Round clamp Ø 20 mm internal 11 mm + M6 screw Brushed nickel 1 Pc

MT050/1 Round clamp Ø 16 mm internal 6.5 mm + M4 screw Chrome 1 Pc

MT050/2 Round clamp Ø 16 mm internal 6.5 mm + M4 screw Gold 1 Pc

MT050/3 Round clamp Ø 16 mm internal 6.5 mm + M4 screw Brushed nickel 1 Pc

ROUND CLAMPS - “U” SECTION BRASS GLASS HOLDERS

MORTGIR1/1 Round swivel clamp Ø 25 x 36 mm inner 11 mm Chrome 1 Pc

MORTGIR1/3 Round swivel clamp Ø 25 x 36 mm inner 11 mm Brushed nickel 1 Pc

MORTGIR5/1 Round swivel clamp Ø 25 x 36 mm inner 11 mm radial Chrome 1 Pc

MORTGIR5/3 Round swivel clamp Ø 25 x 36 mm inner 11 mm radial Brushed nickel 1 Pc

CONE SECTION GLASS HOLDERS

MC161/1 Cone clamp Ø 35 x 40 mm internal 13 mm Chrome 1 Pc

MC161/2 Cone clamp Ø 35 x 40 mm internal 13 mm Gold 1 Pc

MC161/3 Cone clamp Ø 35 x 40 mm internal 13 mm Brushed nickel 1 Pc

“F” SECTION BRASS GLASS HOLDERS

NMF7008/1 “F” section clamp 70 mm for glass 6/8 mm Chrome 1 Pc

NMF7008/2 “F” section clamp 70 mm for glass 6/8 mm Gold 1 Pc

NMF7008/3 “F” section clamp 70 mm for glass 6/8 mm Brushed nickel 1 Pc

NMF7010/1 “F” section clamp 70 mm for glass 8/10 mm Chrome 1 Pc

NMF7010/2 “F” section clamp 70 mm for glass 8/10 mm Gold 1 Pc

NMF7010/3 “F” section clamp 70 mm for glass 8/10 mm Brushed nickel 1 Pc

NMF7012/1 “F” section clamp 70 mm for glass 10/12 mm Chrome 1 Pc

NMF7012/2 “F” section clamp 70 mm for glass 10/12 mm Gold 1 Pc

NMF7012/3 “F” section clamp 70 mm for glass 10/12 mm Brushed nickel 1 Pc

NMF4508/1 “F” section clamp 45 mm for glass 6/8 mm Chrome 1 Pc

NMF4508/2 “F” section clamp 45 mm for glass 6/8 mm Gold 1 Pc

NMF4508/3 “F” section clamp 45 mm for glass 6/8 mm Brushed nickel 1 Pc

NMF4510/1 “F” section clamp 45 mm for glass 8/10 mm Chrome 1 Pc

NMF4510/2 “F” section clamp 45 mm for glass 8/10 mm Gold 1 Pc

NMF4510/3 “F” section clamp 45 mm for glass 8/10 mm Brushed nickel 1 Pc

NMF4512/1 “F” section clamp 45 mm for glass 10/12 mm Chrome 1 Pc

NMF4512/2 “F” section clamp 45 mm for glass 10/12 mm Gold 1 Pc

NMF4512/3 “F” section clamp 45 mm for glass 10/12 mm Brushed nickel 1 Pc

Art. Description Finish Q.ty EURO24,39

31,14

28,21

13,70

19,71

16,36

10,01

14,26

13,36

10,45

14,65

11,86

19,67

21,15

24,23

25,95

16,71

23,35

18,92

10,04

15,05

10,90

9,41

13,74

10,27

9,41

14,40

10,27

7,73

11,79

8,48

7,56

11,65

8,32

7,56

11,65

8,32

NMF3008/1 “F” section clamp 30 mm for glass 6/8 mm Chrome 1 Pc

NMF3008/2 “F” section clamp 30 mm for glass 6/8 mm Gold 1 Pc

NMF3008/3 “F” section clamp 30 mm for glass 6/8 mm Brushed nickel 1 Pc

NMF3010/1 “F” section clamp 30 mm for glass 8/10 mm Chrome 1 Pc

NMF3010/2 “F” section clamp 30 mm for glass 8/10 mm Gold 1 Pc

NMF3010/3 “F” section clamp 30 mm for glass 8/10 mm Brushed nickel 1 Pc

NMF3012/1 “F” section clamp 30 mm for glass 10/12 mm Chrome 1 Pc

NMF3012/2 “F” section clamp 30 mm for glass 10/12 mm Gold 1 Pc

NMF3012/3 “F” section clamp 30 mm for glass 10/12 mm Brushed nickel 1 Pc

NMF2208/1 “F” section clamp 22 mm for glass 6/8 mm Chrome 1 Pc

NMF2208/2 “F” section clamp 22 mm for glass 6/8 mm Gold 1 Pc

NMF2208/3 “F” section clamp 22 mm for glass 6/8 mm Brushed nickel 1 Pc

NMF2210/1 “F” section clamp 22 mm for glass 8/10 mm Chrome 1 Pc

NMF2210/2 “F” section clamp 22 mm for glass 8/10 mm Gold 1 Pc

NMF2210/3 “F” section clamp 22 mm for glass 8/10 mm Brushed nickel 1 Pc

NMF2212/1 “F” section clamp 22 mm for glass 10/12 mm Chrome 1 Pc

NMF2212/2 “F” section clamp 22 mm for glass 10/12 mm Gold 1 Pc

NMF2212/3 “F” section clamp 22 mm for glass 10/12 mm Brushed nickel 1 Pc

“U” SECTION GLASS HOLDERS

MU30095/1 “U” shaped 3026 brass glass holder, with brass glass holder locking screws with PVC heads Chrome 1 Pc

MU30095/3 “U” shaped 3026 brass glass holder, with brass glass holder locking screws with PVC heads Brushed nickel 1 Pc

MU30135/1 “U” shaped 3026 brass glass holder, with brass glass holder locking screws with PVC heads Chrome 1 Pc

MU30135/3 “U” shaped 3026 brass glass holder, with brass glass holder locking screws with PVC heads Brushed nickel 1 Pc

MU3068/1 “U” section glass holder 30 mm for glass 6/8 mm Chrome 1 Pc

MU3068/7 “U” section glass holder 30 mm for glass 6/8 mm Matt chrome 1 Pc

MU30810/1 “U” section glass holder 30 mm for glass 8/10 mm Chrome 1 Pc

MU30810/7 “U” section glass holder 30 mm for glass 8/10 mm Matt chrome 1 Pc

MU301012/1 “U” section glass holder 30 mm for glass 10/12 mm Chrome 1 Pc

MU301012/7 “U” section glass holder 30 mm for glass 10/12 mm Matt chrome 1 Pc

MU4568/1 “U” section glass holder 45 mm for glass 6/8 mm Chrome 1 Pc

MU4568/7 “U” section glass holder 45 mm for glass 6/8 mm Matt chrome 1 Pc

MU45810/1 “U” section glass holder 45 mm for glass 8/10 mm Chrome 1 Pc

MU45810/7 “U” section glass holder 45 mm for glass 8/10 mm Matt chrome 1 Pc

MU451012/1 “U” section glass holder 45 mm for glass 10/12 mm Chrome 1 Pc

MU451012/7 “U” section glass holder 45 mm for glass 10/12 mm Matt chrome 1 Pc

MU7068/1 “U” section glass holder 70 mm for glass 6/8 mm Chrome 1 Pc

MU7068/7 “U” section glass holder 70 mm for glass 6/8 mm Matt chrome 1 Pc

MU70810/1 “U” section glass holder 70 mm for glass 8/10 mm Chrome 1 Pc

MU70810/7 “U” section glass holder 70 mm for glass 8/10 mm Matt chrome 1 Pc

MU701012/1 “U” section glass holder 70 mm for glass 10/12 mm Chrome 1 Pc

MU701012/7 “U” section glass holder 70 mm for glass 10/12 mm Matt chrome 1 Pc

GLASS HOLDER AND POINT FIXINGS

Page 48

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 275/276 >>>

6,57

9,18

7,11

6,29

8,88

6,83

6,29

9,03

6,83

5,85

8,88

6,28

5,41

8,61

5,84

5,41

8,61

5,84

8,28

8,28

8,28

8,28

6,02

6,46

5,52

6,46

5,52

6,46

6,46

7,89

6,02

7,89

6,02

7,89

12,42

12,42

11,92

12,42

11,92

12,42

GLASS HOLDER AND POINT FIXINGS

Page 49 >>> CATALOGUE REFERENCE PAGE 277/282 >>>

RECTANGULAR AND SEMI-CIRCLE BRASS GLASS HOLDERS

BS10HL/1 Rectangular glass holder BS10HL 68.5 x 50 x H 18 mm Chrome 1 Pc

BS10HL/3 Rectangular glass holder BS10HL 68.5 x 50 x H 18 mm Brushed nickel 1 Pc

BC10HL/1 Semi-circle glass holder BC10HL 68.5 x 50 x H 18 mm Chrome 1 Pc

BC10HL/3 Semi-circle glass holder BC10HL 68.5 x 50 x H 18 mm Brushed nickel 1 Pc

BS10VL/1 Rectangular glass holder BS10VL 42.5 x 50 x H 24 mm Chrome 1 Pc

BS10VL/3 Rectangular glass holder BS10VL 42.5 x 50 x H 24 mm Brushed nickel 1 Pc

BC10VL/1 Semi-circle glass holder BC10VL 42.5 x 50 x H 24 mm Chrome 1 Pc

BC10VL/3 Semi-circle glass holder BC10VL 42.5 x 50 x H 24 mm Brushed nickel 1 Pc

BS10/1 Rectangular glass holder BS10 50 x H 25 x 18 mm Chrome 1 Pc

BS10/3 Rectangular glass holder BS10 50 x H 25 x 18 mm Brushed nickel 1 Pc

BC10/1 Semi-circle glass holder BC10 50 x H 25 x 18 mm Chrome 1 Pc

BC10/3 Semi-circle glass holder BC10 50 x H 25 x 18 mm Brushed nickel 1 Pc

COFIS FIXING CONNECTORS

COFIS50B/9 Fixing connector 50 PVC white Machined steel (CNC) 1 Pc

COFIS50N/9 Fixing connector 50 PVC black Machined steel (CNC) 1 Pc

COFIS40B/9 Fixing connector 40 PVC white Machined steel (CNC) 1 Pc

COFIS40N/9 Fixing connector 40 PVC black Machined steel (CNC) 1 Pc

COFIS30B/9 Fixing connector 30 PVC white Machined steel (CNC) 1 Pc

COFIS30N/9 Fixing connector 30 PVC black Machined steel (CNC) 1 Pc

COFIS25B/9 Fixing connector 25 PVC white Machined steel (CNC) 1 Pc

COFIS25N/9 Fixing connector 25 PVC black Machined steel (CNC) 1 Pc

COFIS20B/9 Fixing connector 20 PVC white Machined steel (CNC) 1 Pc

COFIS20N/9 Fixing connector 20 PVC black Machined steel (CNC) 1 Pc

COFIS15B/9 Fixing connector 15 PVC white Machined steel (CNC) 1 Pc

COFIS15N/9 Fixing connector 15 PVC black Machined steel (CNC) 1 Pc

COFIS7B/9 Fixing connector 7 with threaded part 10 mm x M6 PVC white Machined steel (CNC) 1 Pc

COFIS7N/9 Fixing connector 7 with threaded part 10 mm x M6 PVC black Machined steel (CNC) 1 Pc

COFIS6B/9 Fixing connector 6 with threaded part 8 mm x M6 PVC white Machined steel (CNC) 1 Pc

COFIS6N/9 Fixing connector 6 with threaded part 8 mm x M6 PVC black Machined steel (CNC) 1 Pc

ROUNDED COFIS FIXING CONNECTORS

BCOFIS7B/9 Button head screw 20 PVC white Machined steel (CNC) 1 Pc

BCOFIS15B/9 Rounded fixing connector 15 PVC white Machined steel (CNC) 1 Pc

BCOFIS20B/9 Rounded fixing connector 20 PVC white Machined steel (CNC) 1 Pc

BCOFIS25B/9 Rounded fixing connector 25 PVC white Machined steel (CNC) 1 Pc

BCOFIS30B/9 Rounded fixing connector 30 PVC white Machined steel (CNC) 1 Pc

BCOFIS40B/9 Rounded fixing connector 40 PVC white Machined steel (CNC) 1 Pc

Art. Description Finish Q.ty EURO

30,22

30,22

36,56

36,56

41,63

41,63

40,49

40,49

13,69

13,69

13,69

13,69

26,58

26,58

21,44

21,44

18,68

18,68

16,53

16,53

14,25

14,25

14,01

14,01

17,96

17,96

16,53

16,53

12,61

10,39

11,13

13,35

14,84

17,06

POINT FIXINGS

MDV388/9 Variable height fixing stud with shim for glass 12/18 Machined steel (CNC) 1 Pc

MDV3814/9 Variable height fixing stud with shim for glass 18/24 Machined steel (CNC) 1 Pc

MDV3819/9 Variable height fixing stud for glass 24/30 Machined steel (CNC) 1 Pc

PF134/15 Fixed point fixing with countersunk connector Ø 34.8 x H 32 mm, AISI 304 Polished steel 1 Pc

PF134/8 Fixed point fixing with countersunk connector Ø 34.8 x H 32 mm, AISI 304 Brushed steel 1 Pc

PB174/15 Fixed point fixing with stud Ø 34.8 x H 32 mm, AISI 304 Polished steel 1 Pc

PB174/8 Fixed point fixing with stud Ø 34.8 x H 32 mm, AISI 304 Brushed steel 1 Pc

STEEL STUDS

BORKIA0/9 Fixing stud Ø 25 mm for M6 screw Machined steel (CNC) 1 Pc

BORKIA1/9 Fixing stud Ø 25 mm for M8 screw Machined steel (CNC) 1 Pc

BORKIA2/9 Fixing stud Ø 30 mm for M6 screw Machined steel (CNC) 1 Pc

BORKIA3/9 Fixing stud Ø 30 mm for M8 screw Machined steel (CNC) 1 Pc

BORKIA33/9 Fixing stud Ø 30 mm for M10 screw Machined steel (CNC) 1 Pc

BORKIA4/9 Fixing stud Ø 35 mm for M10 screw Machined steel (CNC) 1 Pc

BORKIA40/9 Fixing stud Ø 40 mm for M10 screw Machined steel (CNC) 1 Pc

BORKIA5/9 Fixing stud Ø 45 mm for M10 screw Machined steel (CNC) 1 Pc

BORKIA6/9 Fixing stud Ø 50 mm for M10 screw Machined steel (CNC) 1 Pc

BORKIA66/9 Fixing stud Ø 55 mm for M10 screw Machined steel (CNC) 1 Pc

BORKIA7/9 Fixing stud Ø 75 mm for M10 screw Machined steel (CNC) 1 Pc

STEEL SPACERS

DISTCOFIS1/9 Spacer Ø 55 x H 40 mm for M10 screw Machined steel (CNC) 1 Pc

DISTCOFIS2/9 Spacer Ø 55 x H 25 mm for M10 screw Machined steel (CNC) 1 Pc

DISTCOFIS5040/9 Spacer Ø 50 x H 40 mm for M10 screw Machined steel (CNC) 1 Pc

DISTCOFIS5025/9 Spacer Ø 50 x H 25 mm for M10 screw Machined steel (CNC) 1 Pc

DISTCOFIS3/9 Spacer Ø 45 x H 40 mm for M10 screw Machined steel (CNC) 1 Pc

DISTCOFIS4/9 Spacer Ø 45 x H 25 mm for M10 screw Machined steel (CNC) 1 Pc

DISTCOFIS4040/9 Spacer Ø 40 x H 40 mm for M10 screw Machined steel (CNC) 1 Pc

DISTCOFIS4025/9 Spacer Ø 40 x H 25 mm for M10 screw Machined steel (CNC) 1 Pc

DISTCOFIS5/9 Spacer Ø 35 x H 40 mm for M10 screw Machined steel (CNC) 1 Pc

DISTCOFIS6/9 Spacer Ø 35 x H 25 mm for M10 screw Machined steel (CNC) 1 Pc

DISTCOFIS7/9 Spacer Ø 30 x H 40 mm for M10 screw Machined steel (CNC) 1 Pc

DISTCOFIS8/9 Spacer Ø 30 x H 25 mm for M10 screw Machined steel (CNC) 1 Pc

DISTCOFIS88/9 Spacer Ø 30 x H 25 mm for M8 screw Machined steel (CNC) 1 Pc

DISTCOFIS86/9 Spacer Ø 30 x H 25 mm for M6 screw Machined steel (CNC) 1 Pc

DISTCOFIS78/9 Spacer Ø 30 x H 40 mm for M8 screw Machined steel (CNC) 1 Pc

DISTCOFIS76/9 Spacer Ø 30 x H 40 mm for M6 screw Machined steel (CNC) 1 Pc

DISTCOFIS9/9 Spacer Ø 25 x H 40 mm for M8 screw Machined steel (CNC) 1 Pc

DISTCOFIS10/9 Spacer Ø 25 x H 25 mm for M8 screw Machined steel (CNC) 1 Pc

DISTCOFIS940/9 Spacer Ø 25 x H 40 mm for M6 screw Machined steel (CNC) 1 Pc

DISTCOFIS925/9 Spacer Ø 25 x H 25 mm for M6 screw Machined steel (CNC) 1 Pc

GLASS HOLDER AND POINT FIXINGS

Page 50

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 283/284 >>>

77,80

75,86

57,71

20,54

18,87

20,54

18,87

7,66

7,98

8,32

8,97

9,80

10,97

12,10

14,20

16,54

17,48

29,20

36,27

31,48

39,80

34,24

38,47

32,97

36,44

31,40

34,14

25,36

32,99

28,20

30,82

24,46

42,61

42,61

26,46

22,81

22,67

19,08

GLASS HOLDER AND POINT FIXINGS

Page 51 >>> CATALOGUE REFERENCE PAGE 285 >>>

STEEL SOCKET HEAD GRUB SCREWS

MVITCE1/9 Steel socket head grub screws M4 x 8 mm Machined steel (CNC) 1 Pc

MVITCE2/9 Steel socket head grub screws M4 x 10 mm Machined steel (CNC) 1 Pc

MVITCE3/9 Steel socket head grub screws M4 x 12 mm Machined steel (CNC) 1 Pc

MVITCE31/9 Steel socket head grub screws M4 x 14 mm Machined steel (CNC) 1 Pc

MVITCE4/9 Steel socket head grub screws M4 x 16 MM Machined steel (CNC) 1 Pc

MVITCE41/9 Steel socket head grub screws M4 x 18 mm Machined steel (CNC) 1 Pc

MVITCE42/9 Steel socket head grub screws M4 x 20 mm Machined steel (CNC) 1 Pc

MVITCE43/9 Steel socket head grub screws M4 x 30 mm Machined steel (CNC) 1 Pc

MVITCE5/9 Steel socket head grub screws M5 x 10 mm Machined steel (CNC) 1 Pc

MVITCE6/9 Steel socket head grub screws M5 x 12 mm Machined steel (CNC) 1 Pc

MVITCE61/9 Steel socket head grub screws M5 x 14 mm Machined steel (CNC) 1 Pc

MVITCE7/9 Steel socket head grub screws M5 x 16 mm Machined steel (CNC) 1 Pc

MVITCE71/9 Steel socket head grub screws M5 x 20 mm Machined steel (CNC) 1 Pc

MVITCE81/9 Steel socket head grub screws M6 x 10 mm Machined steel (CNC) 1 Pc

MVITCE9/9 Steel socket head grub screws M6 x 12 mm Machined steel (CNC) 1 Pc

MVITCE10/9 Steel socket head grub screws M6 x 16 mm Machined steel (CNC) 1 Pc

MVITCE11/9 Steel socket head grub screws M6 x 20 mm Machined steel (CNC) 1 Pc

MVITCE12/9 Steel socket head grub screws M6 x 25 mm Machined steel (CNC) 1 Pc

MVITCE13/9 Steel socket head grub screws M6 x 30 mm Machined steel (CNC) 1 Pc

MVITCE14/9 Steel socket head grub screws M6 x 40 mm Machined steel (CNC) 1 Pc

MVITCE15/9 Steel socket head grub screws M8 x 10 mm Machined steel (CNC) 1 Pc

MVITCE16/9 Steel socket head grub screws M8 x 12 mm Machined steel (CNC) 1 Pc

MVITCE17/9 Steel socket head grub screws M8 x 16 mm Machined steel (CNC) 1 Pc

MVITCE18/9 Steel socket head grub screws M8 x 20 mm Machined steel (CNC) 1 Pc

MVITCE19/9 Steel socket head grub screws M8 x 25 mm Machined steel (CNC) 1 Pc

MVITCE20/9 Steel socket head grub screws M8 x 30 mm Machined steel (CNC) 1 Pc

MVITCE21/9 Steel socket head grub screws M8 x 40 mm Machined steel (CNC) 1 Pc

MVITCE22/9 Steel socket head grub screws M8 x 80 mm Machined steel (CNC) 1 Pc

MVITCE23/9 Steel socket head grub screws M10 x 16 mm Machined steel (CNC) 1 Pc

MVITCE24/9 Steel socket head grub screws M10 x 20 mm Machined steel (CNC) 1 Pc

MVITCE25/9 Steel socket head grub screws M10 x 25 mm Machined steel (CNC) 1 Pc

MVITCE26/9 Steel socket head grub screws M10 x 30 mm Machined steel (CNC) 1 Pc

MVITCE27/9 Steel socket head grub screws M10 x 40 mm Machined steel (CNC) 1 Pc

MVITCE28/9 Steel socket head grub screws M10 x 50 mm Machined steel (CNC) 1 Pc

MVITCE29/9 AISI 316 steel socket head grub screws M12 x 25 mm Machined steel (CNC) 1 Pc

MVITCE30/9 AISI 316 steel socket head grub screws M12 x 30 mm Machined steel (CNC) 1 Pc

MVITCE33/9 AISI 316 steel socket head grub screws M12 x 35 mm Machined steel (CNC) 1 Pc

MVITCE32/9 AISI 316 steel socket head grub screws M12 x 40 mm Machined steel (CNC) 1 Pc

PVC WASHERS

GT01 Punched PVC washers Ø 14 hole 4.5 thickness 1 mm Transparent 1 Pc

GT02 Punched PVC washers Ø 16 hole 6.5 thickness 1 mm Transparent 1 Pc

GT03 Punched PVC washers Ø 16 hole 8.5 thickness 1 mm Transparent 1 Pc

GT035 Punched PVC washers Ø 16 hole 10.5 thickness 1 mm Transparent 1 Pc

GT04 Punched PVC washers Ø 18 hole 5.5 thickness 1 mm Transparent 1 Pc

Art. Description Finish Q.ty EURO

0,15

0,14

0,13

0,14

0,13

0,18

0,15

0,22

0,15

0,15

0,18

0,15

0,17

0,21

0,18

0,19

0,21

0,24

0,27

0,36

0,44

0,36

0,36

0,39

0,42

0,47

0,62

1,70

0,94

0,71

0,77

0,85

1,01

1,26

2,60

2,05

2,26

2,53

0,35

0,37

0,37

0,34

0,39

GT041 Punched PVC washers Ø 18 hole 6.5 thickness 1 mm Transparent 1 Pc

GT042 Punched PVC washers Ø 18 hole 8.5 thickness 1 mm Transparent 1 Pc

GT043 Punched PVC washers Ø 18 hole 10.5 thickness 1 mm Transparent 1 Pc

GT05 Punched PVC washers Ø 20 hole 6.5 thickness 1 mm Transparent 1 Pc

GT06 Punched PVC washers Ø 20 hole 8.5 thickness 1 mm Transparent 1 Pc

GT061 Punched PVC washers Ø 20 hole 10.5 thickness 1 mm Transparent 1 Pc

GT07 Punched PVC washers Ø 22 hole 8.5 thickness 1 mm Transparent 1 Pc

GT08 Punched PVC washers Ø 24 hole 6.5 thickness 1 mm Transparent 1 Pc

GT091 Punched PVC washers Ø 25 hole 6.5 thickness 1 mm Transparent 1 Pc

GT09 Punched PVC washers Ø 25 hole 8.5 thickness 1 mm Transparent 1 Pc

GT10 Punched PVC washers Ø 25 hole 10.5 thickness 1 mm Transparent 1 Pc

GT105 Punched PVC washers Ø 25 hole 12.5 thickness 1 mm Transparent 1 Pc

GT11 Punched PVC washers Ø 27 hole 10.5 thickness 1 mm Transparent 1 Pc

GT12 Punched PVC washers Ø 30 hole 6.5 thickness 1 mm Transparent 1 Pc

GT13 Punched PVC washers Ø 30 hole 8.5 thickness 1 mm Transparent 1 Pc

GT14 Punched PVC washers Ø 30 hole 10.5 thickness 1 mm Transparent 1 Pc

GT145 Punched PVC washers Ø 30 hole 12.5 thickness 1 mm Transparent 1 Pc

GT146 Punched PVC washers Ø 30 hole 14.5 thickness 1 mm Transparent 1 Pc

GT15 Punched PVC washers Ø 30 hole 16.5 thickness 1 mm Transparent 1 Pc

GT16 Punched PVC washers Ø 30 hole 20.5 thickness 1 mm Transparent 1 Pc

GT17 Punched PVC washers Ø 35 hole 8.5 thickness 1 mm Transparent 1 Pc

GT18 Punched PVC washers Ø 35 hole 12.5 thickness 1 mm Transparent 1 Pc

GT185 Punched PVC washers Ø 35 hole 10.5 thickness 1 mm Transparent 1 Pc

GT19 Punched PVC washers Ø 40 hole 10.5 thickness 1 mm Transparent 1 Pc

GT195 Punched PVC washers Ø 40 hole 14.5 thickness 1 mm Transparent 1 Pc

GT20 Punched PVC washers Ø 40 hole 20.5 thickness 1 mm Transparent 1 Pc

GT215 Punched PVC washers Ø 45 hole 10.5 thickness 1 mm Transparent 1 Pc

GT216 Punched PVC washers Ø 45 hole 18.5 thickness 1 mm Transparent 1 Pc

GT217 Punched PVC washers Ø 45 hole 28.5 thickness 1 mm Transparent 1 Pc

GT21 Punched PVC washers Ø 50 hole 10.5 thickness 1 mm Transparent 1 Pc

GT22 Punched PVC washers Ø 50 hole 15.5 thickness 1 mm Transparent 1 Pc

GT23 Punched PVC washers Ø 50 hole 25.5 thickness 1 mm Transparent 1 Pc

GT231 Punched PVC washers Ø 55 hole 10.5 thickness 1 mm Transparent 1 Pc

GT235 Punched PVC washers Ø 60 hole 12.5 thickness 1 mm Transparent 1 Pc

GT24 Punched PVC washers Ø 75 hole 25.5 thickness 1 mm Transparent 1 Pc

STEEL SPACERS

MD3540A/9 MAC spacer without visible screws Ø 35 x 31 mm Machined steel (CNC) 1 Pc

DISTQA50/9 Square spacer with neck and stud 50 x 50 x 40 neck L 18 mm Machined steel (CNC) 1 Pc

DISTQA35/9 Square spacer with neck and stud 35 x 35 x 30 neck L 13 mm Machined steel (CNC) 1 Pc

GLASS HOLDER AND POINT FIXINGS

Page 52

Art. Description Finish Q.ty EURO

>>>> CATALOGUE REFERENCE PAGE 285/286 >>>

0,36

0,36

0,36

0,42

0,42

0,42

0,44

0,43

0,40

0,43

0,43

0,43

0,45

0,55

0,55

0,55

0,55

0,50

0,55

0,55

0,60

0,60

0,60

0,65

0,59

0,65

0,80

0,80

0,80

0,95

0,95

0,95

1,14

1,30

1,71

56,57

82,30

62,93

GLASS HOLDER AND POINT FIXINGS

Page 53 >>>> CATALOGUE REFERENCE PAGE 287/289 >>>

BRASS SPACERS

MD4035/1 Spacer Ø 40 x 35 mm with 10 mm adjustment and neck Ø 14 x 11 mm Chrome 1 Pc

MD4035/3 Spacer Ø 40 x 35 mm with 10 mm adjustment and neck Ø 14 x 11 mm Brushed nickel 1 Pc

MD3030/1 Spacer Ø 30 x 30 mm with 5 mm adjustment and neck Ø 14 x 11 mm Chrome 1 Pc

MD3030/3 Spacer Ø 30 x 30 mm with 5 mm adjustment and neck Ø 14 x 11 mm Brushed nickel 1 Pc

MD2025/1 Spacer Ø 20 x 25 mm with 5 mm adjustment and neck Ø 10 x 6 mm Chrome 1 Pc

MD2025/3 Spacer Ø 20 x 25 mm with 5 mm adjustment and neck Ø 10 x 6 mm Brushed nickel 1 Pc

MD230/1 Spacer Ø 20 x 30 mm with 5 mm adjustment Chrome 1 Pc

MD230/3 Spacer Ø 20 x 30 mm with 5 mm adjustment Brushed nickel 1 Pc

GLASS HOLDER STUDS

MD19525/1 Glass Holder Stud Ø 25 x H 6.5 mm Chrome 1 Pc

MD19525/2 Glass Holder Stud Ø 25 x H 6.5 mm Gold 1 Pc

MD19525/3 Glass Holder Stud Ø 25 x H 6.5 mm Brushed nickel 1 Pc

MD19535/1 Glass Holder Stud Ø 35 x H 8 mm Chrome 1 Pc

MD19535/2 Glass Holder Stud Ø 35 x H 8 mm Gold 1 Pc

MD19535/3 Glass Holder Stud Ø 35 x H 8 mm Brushed nickel 1 Pc

MD19550/1 Glass Holder Stud Ø 50 x H 9 mm Chrome 1 Pc

MD19550/2 Glass Holder Stud Ø 50 x H 9 mm Gold 1 Pc

MD19550/3 Glass Holder Stud Ø 50 x H 9 mm Brushed nickel 1 Pc

DCYF1316/9 Glass holder stud, Ø 13mm X 16mm, glass hole 10mm, glass thickness 8mm Machined steel (CNC) 1 Pc

DCYF1318/9 Glass holder stud, Ø 13mm X 18mm, glass hole 10mm, glass thickness 10mm Machined steel (CNC) 1 Pc

DCYF1320/9 Glass holder stud, Ø 13mm X 20mm, glass hole 10mm, glass thickness 12mm Machined steel (CNC) 1 Pc

DCYF1324/9 Glass holder stud, Ø 13mm X 24mm, glass hole 10mm, glass thickness 16mm Machined steel (CNC) 1 Pc

DCYF1820/9 Glass holder stud, Ø 18mm X 20mm, glass hole 13mm, glass thickness 10mm Machined steel (CNC) 1 Pc

DCYF1822/9 Glass holder stud, Ø 18mm X 22mm, glass hole 13mm, glass thickness 12mm Machined steel (CNC) 1 Pc

DCYF1826/9 Glass holder stud, Ø 18mm X 26mm, glass hole 13mm, glass thickness 16mm Machined steel (CNC) 1 Pc

DCYF1830/9 Glass holder stud, Ø 18mm X 30mm, glass hole 13mm, glass thickness 20mm Machined steel (CNC) 1 Pc

PLATE SPACERS

DCY101010/9 M6 flat-head plate spacers, Ø 10 x 10 mm, hole 8mm, glass 4/8mm Machined steel (CNC) 1 Pc

DCY101015/9 M6 flat-head plate spacers, Ø 10 x 15 mm, hole 8mm, glass 4/8mm Machined steel (CNC) 1 Pc

DCY101310/9 M8 flat-head plate spacers, Ø 13 x 10 mm, hole 10mm, glass 4/8mm Machined steel (CNC) 1 Pc

DCY101315/9 M8 flat-head plate spacers, Ø 13 x 15 mm, hole 10mm, glass 4/8mm Machined steel (CNC) 1 Pc

DCY101815/9 M10 flat-head plate spacers, Ø 18 x 15 mm, hole 13mm, glass 4/8mm Machined steel (CNC) 1 Pc

DCY101820/9 M10 flat-head plate spacers, Ø 18 x 20 mm, hole 13mm, glass 4/8mm Machined steel (CNC) 1 Pc

DCYM615/9 M6-15 plate steel spacer, Ø 13 x 15 mm, hole 10mm, glass 4/9mm Machined steel (CNC) 1 Pc

DCYM620/9 M6-20 plate steel spacer, Ø 13 x 20 mm, hole 10mm, glass 4/12mm Machined steel (CNC) 1 Pc

DCYTV13/9 Accessory to tighten screws with flat head and side hole, screw head hole Ø 13mm Machined steel (CNC) 1 Pc

DCYTV18/9 Accessory to tighten screws with flat head and side hole, screw head hole Ø 18mm Machined steel (CNC) 1 Pc

Art. Description Finish Q.ty EURO

51,72

51,72

30,86

30,86

21,28

21,28

22,49

22,49

14,80

18,22

16,39

16,43

21,57

18,03

37,69

43,39

39,28

10,96

10,78

11,68

11,68

17,60

18,68

19,76

20,84

6,39

6,65

7,36

7,72

11,35

12,21

9,52

10,02

19,76

24,07

DCY13155/9 Spacer Ø 13 x 15 mm for M4 wall mount plates, hole 10mm, glass 5mm Machined steel (CNC) 1 Pc

DCY13156/9 Spacer Ø 13 x 15 mm for M4 wall mount plates, hole 10mm, glass 6mm Machined steel (CNC) 1 Pc

DCY13158/9 Spacer Ø 13 x 15 mm for M4 wall mount plates, hole 10mm, glass 8mm Machined steel (CNC) 1 Pc

DCY131510/9 Spacer Ø 13 x 15 mm for M4 wall mount plates, hole 10mm, glass 10mm Machined steel (CNC) 1 Pc

DCY13205/9 Spacer Ø 13 x 20 mm for M4 wall mount plates, hole 10mm, glass 5mm Machined steel (CNC) 1 Pc

DCY13206/9 Spacer Ø 13 x 20 mm for M4 wall mount plates, hole 10mm, glass 6mm Machined steel (CNC) 1 Pc

DCY13208/9 Spacer Ø 13 x 20 mm for M4 wall mount plates, hole 10mm, glass 8mm Machined steel (CNC) 1 Pc

DCY132010/9 Spacer Ø 13 x 20 mm for M4 wall mount plates, hole 10mm, glass 10mm Machined steel (CNC) 1 Pc

DCYUV4/9 Screw Ø 13 x 5mm x M4 to fasten spacers to the glass with UV adhesive Machined steel (CNC) 1 Pc

MDTP18/9 Flat plate spacer Ø 18 x 20 mm Machined steel (CNC) 1 Pc

MDTP23/9 Flat plate spacer Ø 13 x 20 mm Machined steel (CNC) 1 Pc

MDTS13/9 Ball plate spacer Ø 13 x 20 mm Machined steel (CNC) 1 Pc

DISTV2004/9 Mini spacer with studded head screw Machined steel (CNC) 1 Pc

DISTV2010/9 Mini spacer with studded head screw Machined steel (CNC) 1 Pc

DISTC2004/9 Mini spacer with flat head screw Machined steel (CNC) 1 Pc

DISTC2010/9 Mini spacer with flat head screw Machined steel (CNC) 1 Pc

DH1510/9 Steel spacer with anti-theft left thread Ø 15 x H 10 mm for M4 screw Machined steel (CNC) 1 Pc

DH1515/9 Steel spacer with anti-theft left thread Ø 15 x H 15 mm for M4 screw Machined steel (CNC) 1 Pc

DH1520/9 Steel spacer with anti-theft left thread Ø 15 x H 20 mm for M4 screw Machined steel (CNC) 1 Pc

DH1810/9 Steel spacer with anti-theft left thread Ø 18 x H 10 mm for M4 screw Machined steel (CNC) 1 Pc

DH1815/9 Steel spacer with anti-theft left thread Ø 18 x H 15 mm for M4 screw Machined steel (CNC) 1 Pc

DH1820/9 Steel spacer with anti-theft left thread Ø 18 x H 20 mm for M4 screw Machined steel (CNC) 1 Pc

DH2215/9 Steel spacer with anti-theft left thread Ø 22 x H 15 mm for M6 screw Machined steel (CNC) 1 Pc

DH2220/9 Steel spacer with anti-theft left thread Ø 22 x H 20 mm for M6 screw Machined steel (CNC) 1 Pc

DH2225/9 Steel spacer with anti-theft left thread Ø 22 x H 25 mm for M6 screw Machined steel (CNC) 1 Pc

DH2515/9 Steel spacer with anti-theft left thread Ø 25 x H 15 mm for M6 screw Machined steel (CNC) 1 Pc

DH2520/9 Steel spacer with anti-theft left thread Ø 25 x H 20 mm for M6 screw Machined steel (CNC) 1 Pc

DH2525/9 Steel spacer with anti-theft left thread Ø 25 x H 25 mm for M6 screw Machined steel (CNC) 1 Pc

DISTQ1415/8 Steel square spacer with anti-theft left thread 14 x 14 x L 15 mm for M8 screw Brushed steel 1 Pc

DISTQ1620/8 Steel square spacer with anti-theft left thread 16 x 16 x L 20 mm for M8 screw Brushed steel 1 Pc

DISTQ1825/8 Steel square spacer with anti-theft left thread 18 x 18 x L 25 mm for M10 screw Brushed steel 1 Pc

DISTQ2030/8 Steel square spacer with anti-theft left thread 20 x 20 x L 30 mm for M10 screw Brushed steel 1 Pc

GLASS HOLDER AND POINT FIXINGS

Page 54

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 290/292 >>>

8,80

8,80

8,80

8,80

9,52

9,52

9,52

9,52

5,57

14,59

9,52

10,60

7,50

9,26

9,70

11,47

10,14

11,02

11,91

10,58

11,91

13,23

14,11

15,88

16,76

19,40

21,17

22,93

11,47

14,11

17,64

21,17

GLASS HOLDER AND POINT FIXINGS

Page 55 >>> CATALOGUE REFERENCE PAGE 292/294 >

MD192/1 Ø 25 x 25 mm spacer with screw Ø 25 x 19 mm x M10 Chrome 1 Pc

MD192/2 Ø 25 x 25 mm spacer with screw Ø 25 x 19 mm x M10 Gold 1 Pc

MD192/3 Ø 25 x 25 mm spacer with screw Ø 25 x 19 mm x M10 Brushed nickel 1 Pc

MD193/1 Ø 25 x 40 mm spacer with screw Ø 25 x 19 mm x M10 Chrome 1 Pc

MD193/2 Ø 25 x 40 mm spacer with screw Ø 25 x 19 mm x M10 Gold 1 Pc

MD193/3 Ø 25 x 40 mm spacer with screw Ø 25 x 19 mm x M10 Brushed nickel 1 Pc

DCYOT13/93 M6 plate brass spacer, Ø 13 x 20 mm, hole 10mm, glass 4/12mm Brass-plated 1 Pc

DCYOT18/93 M8 plate brass spacer, Ø 18 x 25 mm, hole 13mm, glass 8/16mm Brass-plated 1 Pc

DCYSV13/9 Countersunk head spacer Ø 13 x 20 mm Machined steel (CNC) 1 Pc

DCYSV18/9 Countersunk head spacer Ø 18 x 20 mm Machined steel (CNC) 1 Pc

DCYMX135/9 Spacer Ø 13 x 5 mm, for 10 mm glass panes Machined steel (CNC) 1 Pc

DCYMX1310/9 Spacer Ø 13 x 10 mm, for 10 mm glass panes Machined steel (CNC) 1 Pc

DCYMX1315/9 Spacer Ø 13 x 15 mm, for 10 mm glass panes Machined steel (CNC) 1 Pc

DCYMX1320/9 Spacer Ø 13 x 20 mm, for 10 mm glass panes Machined steel (CNC) 1 Pc

DCYMX185/9 Spacer Ø 18 x 5 mm, for 13 mm glass panes Machined steel (CNC) 1 Pc

DCYMX1810/9 Spacer Ø 18 x 10 mm, for 13 mm glass panes Machined steel (CNC) 1 Pc

DCYMX1815/9 Spacer Ø 18 x 15 mm, for 13 mm glass panes Machined steel (CNC) 1 Pc

DCYMX1820/9 Spacer Ø 18 x 20 mm, for 13 mm glass panes Machined steel (CNC) 1 Pc

DCYMX01 Gasket Ø13mm 0.5x1.7 mm, only for 10mm Transparent 1 Pc

DCYMX03 Gasket Ø13mm 1.75x2.25 mm, only for 10mm Transparent 1 Pc

DCYMX05 Gasket Ø13mm 1.75x3.25 mm, only for 10mm Transparent 1 Pc

DCYMX07 Gasket Ø18mm 1.75x4 mm, only for 13mm Transparent 1 Pc

SCREW-COVER STUDS

DCYB13/9 Steel screw-cover stud Ø 13mm X 5mm Machined steel (CNC) 1 Pc

DCYB18/9 Steel screw-cover stud Ø 18 mm X 6mm Machined steel (CNC) 1 Pc

DCYB15/9 Steel screw-cover stud Ø 15mm X 5mm with M2 locking screw Machined steel (CNC) 1 Pc

DCYB20/9 Steel screw-cover stud Ø 20mm X 6mm with M2 locking screw Machined steel (CNC) 1 Pc

MBOR004/1 Screw-cover stud Ø 15 x H 7.5 mm Chrome 1 Pc

MBOR004/2 Screw-cover stud Ø 15 x H 7.5 mm Gold 1 Pc

MBOR004/3 Screw-cover stud Ø 15 x H 7.5 mm Brushed nickel 1 Pc

MBOR003/1 Screw-cover stud Ø 20 x H 7 mm Chrome 1 Pc

MBOR003/2 Screw-cover stud Ø 20 x H 7 mm Gold 1 Pc

MBOR003/3 Screw-cover stud Ø 20 x H 7 mm Brushed nickel 1 Pc

MBOR001/1 Screw-cover stud Ø 30 x H 7.5 mm Chrome 1 Pc

MBOR001/2 Screw-cover stud Ø 30 x H 7.5 mm Gold 1 Pc

MBOR001/3 Screw-cover stud Ø 30 x H 7.5 mm Brushed nickel 1 Pc

MBOR002/1 Screw-cover stud Ø 50 x H 7.5 mm Chrome 1 Pc

MBOR002/2 Screw-cover stud Ø 50 x H 7.5 mm Gold 1 Pc

MBOR002/3 Screw-cover stud Ø 50 x H 7.5 mm Brushed nickel 1 Pc

BOR01/95 Screw-cover stud Ø 14 100-piece pack Nickel-plated 1 Cf

BOR02/95 Screw-cover stud Ø 20 100-piece pack Nickel-plated 1 Cf

BOR03/95 Stud Ø 20 mm, with 20 mm long screw, 100-piece pack Nickel-plated 1 Cf

Art. Description Finish Q.ty EURO18,08

23,85

20,48

21,58

27,66

24,29

10,96

21,91

11,50

16,88

1,98

2,44

2,91

3,70

3,59

4,31

5,39

6,11

0,54

0,54

0,54

0,99

5,93

8,41

8,80

10,63

3,73

6,94

3,11

6,41

5,65

6,41

8,16

11,16

8,16

19,27

22,31

21,65

19,62

25,09

135,26

PLATE SPACERS WITHOUT GLASS CUT-OUT

DCYP3075/9 Spacers for wall plates without glass cut-out round, Ø 30 x 75mm, for 4/8mm glass Machined steel (CNC) 1 Pc

DCYP7520/9 Spacers for wall plates without glass cut-out square, 75x20/27mm, for 8mm glass Machined steel (CNC) 1 Pc

PATA46/1 Spacers for wall plates without glass cut-out round, Ø 18mm, for 4/6mm glass Chrome 1 Pc

PATA46/2 Spacers for wall plates without glass cut-out round, Ø 18mm, for 4/6mm glass Gold 1 Pc

PATA46/3 Spacers for wall plates without glass cut-out round, Ø 18mm, for 4/6mm glass Brushed nickel 1 Pc

PATA810/1 Spacers for wall plates without glass cut-out round, Ø 18mm, for 8/10mm glass Chrome 1 Pc

PATA810/2 Spacers for wall plates without glass cut-out round, Ø 18mm, for 8/10mm glass Gold 1 Pc

PATA810/3 Spacers for wall plates without glass cut-out round, Ø 18mm, for 8/10mm glass Brushed nickel 1 Pc

BROCHURE STAND ACCESSORIES

DCYDP25/9 Single brochure stand stop, Ø 25mm X 25mm, for 8mm plexiglas Machined steel (CNC) 1 Pc

DCYDP2510/9 Single brochure stand stop, Ø 25mm X 27mm, for 10mm plexiglas Machined steel (CNC) 1 Pc

DCYDP2512/9 Single brochure stand stop, Ø 25mm X 29mm, for 12mm plexiglas Machined steel (CNC) 1 Pc

DCYDP50/9 Double brochure stand stop, Ø 25mm X 25mm, for 8mm plexiglas Machined steel (CNC) 1 Pc

DCYDP14/9 Single brochure stand stop, Ø 15mm X 21mm, for 1/4mm glass Machined steel (CNC) 1 Pc

DCYDP58/9 Single brochure stand stop, Ø 15mm X 25mm, for 5/8mm glass Machined steel (CNC) 1 Pc

BRASS VERTICAL GLASS HOLDERS

MPB110/1 Vertical window lock 8 Chrome 1 Pc

MPB110/2 Vertical window lock 8 Gold 1 Pc

MPB110/24 Vertical window lock 8 Stainless steel simile 1 Pc

MPB111/1 Vertical window lock 12 Chrome 1 Pc

MPB111/2 Vertical window lock 12 Gold 1 Pc

MPB111/24 Vertical window lock 12 Stainless steel simile 1 Pc

MPB121/1 Vertical window lock 14 Chrome 1 Pc

MPB121/2 Vertical window lock 14 Gold 1 Pc

MPB121/3 Vertical window lock 14 Brushed nickel 1 Pc

MPB122/1 Vertical window lock 17 Chrome 1 Pc

MPB122/2 Vertical window lock 17 Gold 1 Pc

MPB122/3 Vertical window lock 17 Brushed nickel 1 Pc

MPB123/1 Vertical window lock 21 Chrome 1 Pc

MPB123/2 Vertical window lock 21 Gold 1 Pc

MPB123/3 Vertical window lock 21 Brushed nickel 1 Pc

STEEL VERTICAL GLASS HOLDERS

MPB1930/15 Set of 4 glass holders diameter 19 mm, for glass 6/8 mm Polished steel 1 St

MPB1930/8 Set of 4 glass holders diameter 19 mm, for glass 6/8 mm Brushed steel 1 St

GLASS HOLDER AND POINT FIXINGS

Page 56

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 295/299 >>>

71,85

89,81

12,17

19,32

12,17

14,11

16,59

14,11

27,30

30,90

32,33

33,77

15,09

15,81

15,10

21,92

19,10

21,46

29,89

27,11

39,28

59,25

39,28

32,26

50,07

37,91

32,26

50,07

37,91

51,96

43,30

GLASS HOLDER AND POINT FIXINGS

Page 57 >>> CATALOGUE REFERENCE PAGE 300/305 >>>

SPACER CONNECTORS

MDMACBOR/1 Spacer connector MDMACBOR Ø 40 x H20/24 mm for glass 8/12 mm Chrome 1 Pc

MDMACBOR/3 Spacer connector MDMACBOR Ø 40 x H20/24 mm for glass 8/12 mm Brushed nickel 1 Pc

MD35FLAT/1 Spacer connector MD35FLAT Ø 35 x H 24/25.5 mm for glass 12/13.5 mm Chrome 1 Pc

MD35FLAT/3 Spacer connector MD35FLAT Ø 35 x H 24/25.5 mm for glass 12/13.5 mm Brushed nickel 1 Pc

MD25FLAT/1 Spacer connector MD25FLAT Ø 25 x H 22/24 mm for glass 10/12 mm Chrome 1 Pc

MD25FLAT/3 Spacer connector MD25FLAT Ø 25 x H 22/24 mm for glass 10/12 mm Brushed nickel 1 Pc

PLATE SUPPORTS

DCST30/9 Plate support 30° Ø 13mm with base protection felt, hole 10mm, glass 8mm Machined steel (CNC) 1 Pc

DCST60/9 Plate support 60° Ø 13mm with base protection felt, hole 10mm, glass 8mm Machined steel (CNC) 1 Pc

DCST10/9 Plates support Ø 10 x 25mm, glass hole 6mm, for 5/8mm glass Machined steel (CNC) 1 Pc

DCST13/9 Plates support Ø 13 x 50mm, glass hole 10mm, for 8/16mm glass Machined steel (CNC) 1 Pc

BRASS SCREWS

MVIT0610/1 Flat head screw with 6 blind holes Ø 14 x 20 mm for M4 Chrome 1 Pc

MVIT0610/3 Flat head screw with 6 blind holes Ø 14 x 20 mm for M4 Brushed nickel 1 Pc

MVIT061/1 Flat head screw with 6 blind holes Ø 25 x 24 mm for M8 Chrome 1 Pc

MVIT061/3 Flat head screw with 6 blind holes Ø 25 x 24 mm for M8 Brushed nickel 1 Pc

MVIT063/1 Flat head screw with 6 blind holes Ø 25 x 30 mm for M10 Chrome 1 Pc

MVIT063/3 Flat head screw with 6 blind holes Ø 25 x 30 mm for M10 Brushed nickel 1 Pc

MVIT065/1 Flat head screw with 6 blind holes Ø 30 x 24 mm x M8 Chrome 1 Pc

MVIT065/3 Flat head screw with 6 blind holes Ø 30 x 24 mm x M8 Brushed nickel 1 Pc

MVIT067/1 Flat head screw with 6 blind holes Ø 30 x 30 mm x M10 Chrome 1 Pc

MVIT067/3 Flat head screw with 6 blind holes Ø 30 x 30 mm x M10 Brushed nickel 1 Pc

MVIT068/1 Flat head screw with 6 blind holes Ø 40 x 35 mm x M10 Chrome 1 Pc

MVIT068/3 Flat head screw with 6 blind holes Ø 40 x 35 mm x M10 Brushed nickel 1 Pc

MVIT069/1 Flat head screw with 6 blind holes Ø 50 x 36 mm x M10 Chrome 1 Pc

MVIT069/3 Flat head screw with 6 blind holes Ø 50 x 36 mm x M10 Brushed nickel 1 Pc

MVIT0110/1 Smooth flat head screw Ø 14 x 20 mm x M4 Chrome 1 Pc

MVIT0110/3 Smooth flat head screw Ø 14 x 20 mm x M4 Brushed nickel 1 Pc

MVIT017/1 Smooth flat head screw Ø 16 x 14 mm x M4 Chrome 1 Pc

MVIT017/3 Smooth flat head screw Ø 16 x 14 mm x M4 Brushed nickel 1 Pc

MVIT012/1 Smooth flat head screw Ø 18 x 35 mm x M5 Chrome 1 Pc

MVIT012/3 Smooth flat head screw Ø 18 x 35 mm x M5 Brushed nickel 1 Pc

MVIT015/1 Smooth flat head screw Ø 20 x 25 mm x M6 Chrome 1 Pc

MVIT015/3 Smooth flat head screw Ø 20 x 25 mm x M6 Brushed nickel 1 Pc

MVIT016/1 Smooth flat head screw Ø 20 x 25 mm x M8 Chrome 1 Pc

MVIT016/3 Smooth flat head screw Ø 20 x 25 mm x M8 Brushed nickel 1 Pc

MVIT019/1 Smooth flat head screw Ø 22 x 24 mm x M8 Chrome 1 Pc

MVIT019/3 Smooth flat head screw Ø 22 x 24 mm x M8 Brushed nickel 1 Pc

Art. Description Finish Q.ty EURO

25,86

25,86

19,35

19,35

12,24

12,24

10,06

15,27

7,29

18,97

7,98

9,21

7,13

8,37

7,13

8,38

9,64

10,88

13,46

14,70

18,59

19,82

18,99

20,23

6,27

7,50

6,27

7,50

4,11

5,35

4,05

5,29

4,39

5,63

7,98

9,21

MVIT013/1 Smooth flat head screw Ø 25 x 28 mm x M6 Chrome 1 Pc

MVIT013/3 Smooth flat head screw Ø 25 x 28 mm x M6 Brushed nickel 1 Pc

MVIT014/1 Smooth flat head screw Ø 30 x 28 mm x M8 Chrome 1 Pc

MVIT014/3 Smooth flat head screw Ø 30 x 28 mm x M8 Brushed nickel 1 Pc

MVIT018/1 Smooth flat head screw Ø 30 x 25 mm x M10 Chrome 1 Pc

MVIT018/3 Smooth flat head screw Ø 30 x 25 mm x M10 Brushed nickel 1 Pc

MVIT0111/1 Smooth flat head screw Ø 50 x 30 mm x M10 Chrome 1 Pc

MVIT0111/3 Smooth flat head screw Ø 50 x 30 mm x M10 Brushed nickel 1 Pc

MVIT022/1 Knurled flat head screw Ø 14 x 20 mm x M4 Chrome 1 Pc

MVIT022/3 Knurled flat head screw Ø 14 x 20 mm x M4 Brushed nickel 1 Pc

MVIT023/1 Knurled flat head screw Ø 20 x 16 mm x M6 Chrome 1 Pc

MVIT023/3 Knurled flat head screw Ø 20 x 16 mm x M6 Brushed nickel 1 Pc

MVIT026/1 Knurled flat head screw Ø 20 x 22 mm x M6 Chrome 1 Pc

MVIT026/3 Knurled flat head screw Ø 20 x 22 mm x M6 Brushed nickel 1 Pc

MVIT028/1 Knurled flat head screw Ø 22 x 24 mm x M8 Chrome 1 Pc

MVIT028/3 Knurled flat head screw Ø 22 x 24 mm x M8 Brushed nickel 1 Pc

MVIT024/1 Knurled flat head screw Ø 24 x 16 mm x M6 Chrome 1 Pc

MVIT024/3 Knurled flat head screw Ø 24 x 16 mm x M6 Brushed nickel 1 Pc

MVIT025/1 Knurled flat head screw Ø 24 x 28 mm x M6 Chrome 1 Pc

MVIT025/3 Knurled flat head screw Ø 24 x 28 mm x M6 Brushed nickel 1 Pc

MVIT027/1 Knurled flat head screw Ø 25 x 22 mm x M6 Chrome 1 Pc

MVIT027/3 Knurled flat head screw Ø 25 x 22 mm x M6 Brushed nickel 1 Pc

MVIT029/1 Knurled flat head screw Ø 50 x 30 mm x M10 Chrome 1 Pc

MVIT029/3 Knurled flat head screw Ø 50 x 30 mm x M10 Brushed nickel 1 Pc

MVIT036/1 Button head screw Ø 14 x 20 mm x M4 Chrome 1 Pc

MVIT036/3 Button head screw Ø 14 x 20 mm x M4 Brushed nickel 1 Pc

MVIT031/1 Button head screw Ø 18 x 20 mm x M5 Chrome 1 Pc

MVIT031/3 Button head screw Ø 18 x 20 mm x M5 Brushed nickel 1 Pc

MVIT035/1 Button head screw Ø 22 x 24 mm x M8 Chrome 1 Pc

MVIT035/3 Button head screw Ø 22 x 24 mm x M8 Brushed nickel 1 Pc

MVIT033/1 Button head screw Ø 30 x 24 mm x M8 Chrome 1 Pc

MVIT033/3 Button head screw Ø 30 x 24 mm x M8 Brushed nickel 1 Pc

MVIT034/1 Button head screw Ø 30 x 25 mm x M10 Chrome 1 Pc

MVIT034/3 Button head screw Ø 30 x 25 mm x M10 Brushed nickel 1 Pc

MVIT032/1 Button head screw Ø 40 x 25 mm x M10 Chrome 1 Pc

MVIT032/3 Button head screw Ø 40 x 25 mm x M10 Brushed nickel 1 Pc

MVIT037/1 Button head screw Ø 50 x 30 mm x M10 Chrome 1 Pc

MVIT037/3 Button head screw Ø 50 x 30 mm x M10 Brushed nickel 1 Pc

MVIT048/1 Button head screw with 2 holes Ø 14 x 30 mm x M4 Chrome 1 Pc

MVIT048/3 Button head screw with 2 holes Ø 14 x 30 mm x M4 Brushed nickel 1 Pc

MVIT047/1 Button head screw with 2 holes Ø 22 x 24 mm x M8 Chrome 1 Pc

MVIT047/3 Button head screw with 2 holes Ø 22 x 24 mm x M8 Brushed nickel 1 Pc

MVIT041/1 Button head screw with 2 holes Ø 25 x 10 mm x M6 Chrome 1 Pc

GLASS HOLDER AND POINT FIXINGS

Page 58

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 305/306 >>>

4,85

6,09

5,87

7,12

9,35

10,58

19,96

21,19

4,22

5,46

3,48

4,72

3,93

5,18

6,84

8,07

5,13

6,37

5,47

6,72

6,33

7,57

19,96

21,19

5,70

6,93

4,22

5,46

6,84

8,07

9,35

10,58

9,35

10,58

12,09

15,25

21,10

22,33

5,70

6,93

6,73

7,96

5,19

GLASS HOLDER AND POINT FIXINGS

Page 59 >>> CATALOGUE REFERENCE PAGE 306/307 >>>

MVIT041/3 Button head screw with 2 holes Ø 25 x 10 mm x M6 Brushed nickel 1 Pc

MVIT042/1 Button head screw with 2 holes Ø 25 x 19 mm x M10 Chrome 1 Pc

MVIT042/3 Button head screw with 2 holes Ø 25 x 19 mm x M10 Brushed nickel 1 Pc

MVIT043/1 Button head screw with 2 holes Ø 25 x 28 mm x M10 Chrome 1 Pc

MVIT043/3 Button head screw with 2 holes Ø 25 x 28 mm x M10 Brushed nickel 1 Pc

MVIT045/1 Button head screw with 2 holes Ø 35 x 14 mm x M8 Chrome 1 Pc

MVIT045/3 Button head screw with 2 holes Ø 35 x 14 mm x M8 Brushed nickel 1 Pc

MVIT044/1 Button head screw with 2 holes Ø 40 x 25 mm x M10 Chrome 1 Pc

MVIT044/3 Button head screw with 2 holes Ø 40 x 25 mm x M10 Brushed nickel 1 Pc

MVIT046/1 Button head screw with 2 holes Ø 50 x 16 mm x M10 Chrome 1 Pc

MVIT046/3 Button head screw with 2 holes Ø 50 x 16 mm x M10 Brushed nickel 1 Pc

MVIT0513/1 Flat head screw with 2 holes Ø 14 x 20 mm x M4 Chrome 1 Pc

MVIT0513/3 Flat head screw with 2 holes Ø 14 x 20 mm x M4 Brushed nickel 1 Pc

MVIT0511/1 Flat head screw with 2 holes Ø 22 x 24 mm x M4 Chrome 1 Pc

MVIT0511/3 Flat head screw with 2 holes Ø 22 x 24 mm x M4 Brushed nickel 1 Pc

MVIT0512/1 Flat head screw with 2 holes Ø 22 x 24 mm x M6 Chrome 1 Pc

MVIT0512/3 Flat head screw with 2 holes Ø 22 x 24 mm x M6 Brushed nickel 1 Pc

MVIT052/1 Flat head screw with 2 holes Ø 22 x 24 mm x M8 Chrome 1 Pc

MVIT052/3 Flat head screw with 2 holes Ø 22 x 24 mm x M8 Brushed nickel 1 Pc

MVIT053/1 Flat head screw with 2 holes Ø 25 x 20 mm x M10 Chrome 1 Pc

MVIT053/3 Flat head screw with 2 holes Ø 25 x 20 mm x M10 Brushed nickel 1 Pc

MVIT054/1 Flat head screw with 2 holes Ø 30 x 22 mm x M10 Chrome 1 Pc

MVIT054/3 Flat head screw with 2 holes Ø 30 x 22 mm x M10 Brushed nickel 1 Pc

MVIT055/1 Flat head screw with 2 holes Ø 30 x 24 mm x M8 Chrome 1 Pc

MVIT055/3 Flat head screw with 2 holes Ø 30 x 24 mm x M8 Brushed nickel 1 Pc

MVIT057/1 Flat head screw with 2 holes Ø 35 x 16 mm x M8 Chrome 1 Pc

MVIT057/3 Flat head screw with 2 holes Ø 35 x 16 mm x M8 Brushed nickel 1 Pc

MVIT056/1 Flat head screw with 2 holes Ø 40 x 24 mm x M10 Chrome 1 Pc

MVIT056/3 Flat head screw with 2 holes Ø 40 x 24 mm x M10 Brushed nickel 1 Pc

MVIT0510/1 Flat head screw with 2 holes Ø 50 x 30 mm x M10 Chrome 1 Pc

MVIT0510/3 Flat head screw with 2 holes Ø 50 x 30 mm x M10 Brushed nickel 1 Pc

AISI 304 STAINLESS STEEL SCREWS

VITC256/9 Steel screw with smooth flat head Ø 25 x 25 mm for M6 Machined steel (CNC) 1 Pc

VITC258/9 Steel screw with smooth flat head Ø 25 x 30 mm for M8 Machined steel (CNC) 1 Pc

VITC30825/9 Steel screw with smooth flat head Ø 30 x 25 mm for M8 Machined steel (CNC) 1 Pc

VITC30830/9 Steel screw with smooth flat head Ø 30 x 30 mm for M8 Machined steel (CNC) 1 Pc

VITC40825/9 Steel screw with smooth flat head Ø 40 x 25 mm for M10 Machined steel (CNC) 1 Pc

VITC40830/9 Steel screw with smooth flat head Ø 40 x 30 mm for M10 Machined steel (CNC) 1 Pc

VITC50830/9 Steel screw with smooth flat head Ø 50 x 30 mm for M10 Machined steel (CNC) 1 Pc

VITC50835/9 Steel screw with smooth flat head Ø 50 x 35 mm for M10 Machined steel (CNC) 1 Pc

Art. Description Finish Q.ty EURO6,43

5,59

6,83

6,44

7,69

14,77

16,01

13,46

14,70

16,08

17,32

6,27

7,50

6,84

8,07

6,84

8,07

5,59

6,83

5,42

6,66

8,27

9,51

7,41

8,66

10,61

11,85

13,23

14,47

19,56

20,80

16,00

16,39

17,13

17,61

22,44

22,89

28,10

29,08

BLIND BOSSES

BORC25/9 Blind bosses Ø 25 x 6 mm hole M6 Machined steel (CNC) 1 Pc

BORC30/9 Blind bosses Ø 30 x 6 mm hole M8 Machined steel (CNC) 1 Pc

BORC35/9 Blind bosses Ø 35 x 7 mm hole M10 Machined steel (CNC) 1 Pc

BORC40/9 Blind bosses Ø 40 x 7 mm hole M10 Machined steel (CNC) 1 Pc

BORC45/9 Blind bosses Ø 45 x 8 mm hole M10 Machined steel (CNC) 1 Pc

BORC50/9 Blind bosses Ø 50 x 8 mm hole M10 Machined steel (CNC) 1 Pc

BORC55/9 Blind bosses Ø 55 x 8 mm hole M10 Machined steel (CNC) 1 Pc

HEXAGON SOCKET GRUB SCREWS

MGRAN12/9 AISI 304 steel hex socket head locking screw 50 mm x M10 Machined steel (CNC) 1 Pc

MGRAN11/9 AISI 304 steel hex socket head locking screw 45 mm x M10 Machined steel (CNC) 1 Pc

MGRAN1/9 AISI 304 steel hex socket head locking screw 40 mm x M10 Machined steel (CNC) 1 Pc

MGRAN15/9 AISI 304 steel hex socket head locking screw 30 mm x M10 Machined steel (CNC) 1 Pc

MGRAN2/9 AISI 304 steel hex socket head locking screw 25 mm x M10 Machined steel (CNC) 1 Pc

MGRAN22/9 AISI 304 steel hex socket head locking screw 20 mm x M10 Machined steel (CNC) 1 Pc

MGRAN3/9 AISI 304 steel hex socket head locking screw 16 mm x M10 Machined steel (CNC) 1 Pc

MGRAN42/9 AISI 304 steel hex socket head locking screw 50 mm x M8 Machined steel (CNC) 1 Pc

MGRAN43/9 AISI 304 steel hex socket head locking screw 45 mm x M8 Machined steel (CNC) 1 Pc

MGRAN44/9 AISI 304 steel hex socket head locking screw 40 mm x M8 Machined steel (CNC) 1 Pc

MGRAN45/9 AISI 304 steel hex socket head locking screw 35 mm x M8 Machined steel (CNC) 1 Pc

MGRAN451/9 AISI 304 steel hex socket head locking screw 30 mm x M8 Machined steel (CNC) 1 Pc

MGRAN46/9 AISI 304 steel hex socket head locking screw 25 mm x M8 Machined steel (CNC) 1 Pc

MGRAN47/9 AISI 304 steel hex socket head locking screw 20 mm x M8 Machined steel (CNC) 1 Pc

MGRAN4/9 AISI 304 steel hex socket head locking screw 16 mm x M8 Machined steel (CNC) 1 Pc

MGRAN41/9 AISI 304 steel hex socket head locking screw 14 mm x M8 Machined steel (CNC) 1 Pc

MGRAN55/9 AISI 304 steel hex socket head locking screw 20 mm x M6 Machined steel (CNC) 1 Pc

MGRAN5/9 AISI 304 steel hex socket head locking screw 16 mm x M6 Machined steel (CNC) 1 Pc

MGRAN7/9 AISI 304 steel hex socket head locking screw 10 mm x M6 Machined steel (CNC) 1 Pc

AISI 304 STAINLESS STEEL SCREWS

MVAC3041/9 Stainless steel screw with 4 blind holes Ø 25 x 27,5 mm for M8 Machined steel (CNC) 1 Pc

MVAC3044/9 Stainless steel screw with 4 blind holes Ø 35 x 36 mm for M12 Machined steel (CNC) 1 Pc

MVAC3048/9 Stainless steel screw with 4 blind holes Ø 40 x 30 mm for M10 Machined steel (CNC) 1 Pc

DOUBLE SPACERS

DIST001/1 Double spacer Ø 25 x 40 mm with knurled screws Chrome 1 Pc

DIST001/2 Double spacer Ø 25 x 40 mm with knurled screws Gold 1 Pc

DIST001/3 Double spacer Ø 25 x 40 mm with knurled screws Brushed nickel 1 Pc

DIST002/95 Double spacer Ø 10 x 30 mm with knurled screws Nickel-plated 1 Pc

DIST003/95 Double spacer Ø 10 x 40 mm with knurled screws Nickel-plated 1 Pc

DIST004/1 Double spacer Ø 18 x 35 mm with button head screws Chrome 1 Pc

DIST004/2 Double spacer Ø 18 x 35 mm with button head screws Gold 1 Pc

DIST004/3 Double spacer Ø 18 x 35 mm with button head screws Brushed nickel 1 Pc

DIST005/1 Double spacer Ø 20 x 28 mm with flat knurled screws Chrome 1 Pc

DIST005/2 Double spacer Ø 20 x 28 mm with flat knurled screws Gold 1 Pc

DIST005/3 Double spacer Ø 20 x 28 mm with flat knurled screws Brushed nickel 1 Pc

GLASS HOLDER AND POINT FIXINGS

Page 60

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 307/308 >>>

9,57

10,49

11,39

12,48

14,59

16,03

18,21

1,84

1,80

1,46

1,15

1,03

0,88

0,80

1,23

1,19

0,96

0,88

0,80

0,72

0,60

0,50

0,50

0,44

0,39

0,33

15,26

27,37

31,86

19,84

24,63

23,22

4,11

4,74

16,98

20,40

19,62

17,03

20,45

19,27

GLASS HOLDER AND POINT FIXINGS

Page 61 >>> CATALOGUE REFERENCE PAGE 309 >>>

TOOLS

UT400 Caliper tool for blind holes 4 pin Ø 3.9 mm 1 Pc

UT300 Caliper tool for blind holes 3 pin Ø 2.9 mm 1 Pc

UTC300R Replacement pins Ø 2.9 mm 1 Pair

UT250 Caliper tool for blind holes 2.5 pin Ø 2.4 mm 1 Pc

UTC250R Replacement pins Ø 2.4 mm 1 Pair

UT200 Caliper tool for blind holes 2 pin Ø 1.8 mm 1 Pc

UTC200R Replacement pins Ø 1.8 mm 1 Pair

CHSETT19 Hook wrench with pin Ø2.8 mm, for Ø19/50mm 1 Pc

CHSETT32 Hook wrench with pin Ø3.8 mm, for Ø32/75mm 1 Pc

Art. Description Q.ty EURO

41,22

38,72

12,49

37,47

12,49

38,72

12,49

61,08

93,38

AISI 304 STEEL SLIDING SYSTEMS FOR HIGH THICKNESS MOD.: GIUMAX 8500

GLM8500 Roller carriages giumax 8500 Machined steel (CNC) 1 Set

UT250 Calliper tool for blind holes Ø 2.4 mm 1 Pc

GLMBST200 Pre-drilled 2000 mm semi-round track with 4 holes Brushed steel 1 Pc

GLMBST300 Pre-drilled 3000 mm semi-round track with 5 holes Brushed steel 1 Pc

GLMBST400 Pre-drilled 4000 mm semi-round track with 6 holes Brushed steel 1 Pc

GLMBST Semi-round track to measure Brushed steel Per m

GLMRC Roller with trapezoidal groove Ø 72 mm Machined steel (CNC) 1 Pc

GLMRL Flat roller Ø 33 mm Machined steel (CNC) 1 Pc

GLMATS Ceiling fitting Machined steel (CNC) 1 Pc

GLMFERM Stroke stop Brushed steel 1 Pc

GLMSTOPDX Door locking bracket for right glmferm Brushed steel 1 Pc

GLMSTOPSX Door locking bracket for left glmferm Brushed steel 1 Pc

GLMGREG/88 Lower adjustable guide 11/19 Brushed steel-effect aluminium 1 Pc

AISI 304 STEEL SLIDING SYSTEMS FOR HIGH THICKNESS MOD.: GIUMAX 8500 - DOOR DIAGRAMS

GM85002PLA Mod. Giumax 8500 bar 2000 ceiling fitting. Machined steel (CNC) 1 Set

Maximum door-opening width 989 mm

STEEL SYSTEMS FOR SLIDING DOORS

Page 62

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 313/318 >>>

354,71

37,47

636,12

775,81

1.419,59

on request

137,56

79,58

90,93

77,94

87,82

87,82

61,21

1.552,95

STEEL SYSTEMS FOR SLIDING DOORS

Page 63 >>> CATALOGUE REFERENCE PAGE 318/321 >>>

GM85003PLA Mod. Giumax 8500 bar 3000 ceiling fitting. Machined steel (CNC) 1 Set

Maximum door-opening width 1489 mm

GM85004PLA Mod. Giumax 8500 bar 4000 ceiling fitting. Machined steel (CNC) 1 Set

Maximum door-opening width 2052 mm

AISI 304 STEEL SLIDING SYSTEM FOR HIGH THICKNESS - MOD.: GIUMAX 6500

GLM6500 Pair of giumax 6500 carriages Machined steel (CNC) 1 Pair

UT250 Calliper tool for blind holes Ø 2.4 mm 1 Pc

GLMBST200 Pre-drilled 2000 mm semi-round track with 4 holes Brushed steel 1 Pc

GLMBST300 Pre-drilled 3000 mm semi-round track with 5 holes Brushed steel 1 Pc

GLMBST400 Pre-drilled 4000 mm semi-round track with 6 holes Brushed steel 1 Pc

GLMBST Semi-round track to measure Brushed steel Per m

GLMATM Wall fitting Machined steel (CNC) 1 Pc

GLMATV Glass fitting Machined steel (CNC) 1 Pc

GLMFERM Stroke stop Brushed steel 1 Pc

GLMSTOPDX Door locking bracket for right glmferm Brushed steel 1 Pc

GLMSTOPSX Door locking bracket for left glmferm Brushed steel 1 Pc

GLMGREG/88 Lower adjustable guide 11/19 Brushed steel-effect aluminium 1 Pc

Art. Description Finish Q.ty EURO1.779,46

3.067,04

974,88

37,47

636,12

775,81

1.419,59

on request

19,14

77,55

77,94

87,82

87,82

61,21

AISI 304 STEEL SLIDING SYSTEMS FOR HIGH THICKNESS MOD.: GIUMAX 6500 - DOOR DIAGRAMS

GM65002VET Mod. Giumax 6500 bar 2000 glass fitting Machined steel (CNC) 1 Set

GM65003VET Mod. Giumax 6500 bar 3000 glass fitting Machined steel (CNC) 1 Set

GM65004VET Mod. Giumax 6500 bar 4000 glass fitting for double door Machined steel (CNC) 1 Set

GM65002MUR Mod. Giumax 6500 bar 2000 wall fitting Machined steel (CNC) 1 Set

GM65003MUR Mod. Giumax 6500 bar 3000 wall fitting Machined steel (CNC) 1 Set

GM65004MUR Mod. Giumax 6500 bar 4000 wall fitting for double door Machined steel (CNC) 1 Set

GIUMAX - SLIDING DOORS from 10 to 12 mm in AISI 304 MOD: GIUMAX 2000 ECO

GLM2000ECO Mod. Giumax 2000 ECONOMIK kit for 2 m wall fitting Brushed steel 1 Set

UT300 Calliper tool for blind holes Ø 2.9 mm 1 Pc

STEEL SYSTEMS FOR SLIDING DOORS

Page 64

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 325/329 >>>

2.119,59

2.332,73

4.227,10

1.885,93

2.040,65

3.876,60

410,57

38,72

STEEL SYSTEMS FOR SLIDING DOORS

Page 65 >>> CATALOGUE REFERENCE PAGE 332/334 >>>

GIUMAX - SLIDING DOORS from 8 to 12 mm in AISI 304 MOD: GIUMAX 2000

GLM2000 Pair of giumax 2000 carriages Machined steel (CNC) 1 Pair

UT300 Calliper tool for blind holes Ø 2.9 mm 1 Pc

GLMCAV2 2000 mm tubular track with finishing end caps Ø 25 mm x 2 mm Brushed steel 1 Pc

GLMCAV3 3000 mm tubular track with finishing end caps Ø 25 mm x 2 mm Brushed steel 1 Pc

GLMCAV4 4000 mm tubular track with finishing end caps Ø 25 mm x 2 mm Brushed steel 1 Pc

GLM33M5 Wall fitting Machined steel (CNC) 1 Pc

GLM33VT Glass fitting Machined steel (CNC) 1 Pc

GLM8300A Side wall fitting Brushed steel 1 Pc

GLMBLCDX Right stroke stop Brushed steel 1 Pc

GLMBLCSX Left stroke stop Brushed steel 1 Pc

057,3030,071/97 Lower adjustable floor guide 6/12.7mm Matt aluminium 1 Pc

057,3030,071/91 Lower adjustable floor guide 6/12.7mm Polished aluminium 1 Pc

057,3030,071/88 Lower adjustable floor guide 6/12.7mm Brushed steel-effect aluminium 1 Pc

GLMMOLL Damped stroke stop Brushed steel 1 Pc

STPDX/8 Right floor-mounted door stop Brushed steel 1 Pc

STPSX/8 Left floor-mounted door stop Brushed steel 1 Pc

Art. Description Finish Q.ty EURO

462,61

38,72

114,51

153,75

193,85

46,22

81,32

49,58

39,47

39,47

50,73

50,73

50,73

59,96

30,88

30,88

GIUMAX - SLIDING DOORS from 6 to 10 mm in AISI 304 MOD: GIUMAX 2000 - DOOR DIAGRAMS

GLM20002MUR Mod. Giumax 2000 kit for 2 m wall fitting bar Machined steel (CNC) 1 Set

GLM20003MUR Mod. Giumax 2000 kit for 3 m wall fitting bar Machined steel (CNC) 1 Set

GLM20004MUR Mod. Giumax 2000 kit for 4 m wall fitting bar for double door Machined steel (CNC) 1 Set

GLM20002VET Mod. Giumax 2000 kit for 2 m glass fitting bar Machined steel (CNC) 1 Set

GLM20003VET Mod. Giumax 2000 kit for 3 m glass fitting bar Machined steel (CNC) 1 Set

GLM20004VET Mod. Giumax 2000 kit for 4 m glass fitting bar for double door Machined steel (CNC) 1 Set

GIUMAX - SLIDING DOORS from 10 to 12 mm in AISI 304 MOD: GIUMAX 2500

GLM2500 Pair of giumax 2500 carriages Brushed steel 1 Pair

UT300 Calliper tool for blind holes Ø 2.9 mm 1 Pc

GLMCAV2 2000 mm tubular track with finishing end caps Ø 25 mm x 2 mm Brushed steel 1 Pc

GLMCAV3 3000 mm tubular track with finishing end caps Ø 25 mm x 2 mm Brushed steel 1 Pc

GLMCAV4 4000 mm tubular track with finishing end caps Ø 25 mm x 2 mm Brushed steel 1 Pc

GLM8300A Side wall fitting Brushed steel 1 Pc

GLM2106 Single ceiling fitting Machined steel (CNC) 1 Pc

STEEL SYSTEMS FOR SLIDING DOORS

Page 66

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 338/342 >>>

900,88

1.032,56

1.766,59

1.041,28

1.243,15

2.047,38

279,71

38,72

114,51

153,75

193,85

49,58

100,80

STEEL SYSTEMS FOR SLIDING DOORS

Page 67 >>> CATALOGUE REFERENCE PAGE 342/349 >>>

GLMBLC01 Stroke stop Brushed steel 1Pc

057,3030,071/97 Lower adjustable floor guide 6/12.7mm Matt aluminium 1 Pc

057,3030,071/91 Lower adjustable floor guide 6/12.7mm Polished aluminium 1 Pc

057,3030,071/88 Lower adjustable floor guide 6/12.7mm Brushed steel-effect aluminium 1 Pc

GIUMAX - SLIDING DOORS from 10 to 12 mm in AISI 304 MOD: GIUMAX 2500 - DOOR DIAGRAMS

GLM25002SOF Mod. Giumax 2500 kit for 2 m ceiling fitting bar Machined steel (CNC) 1 Set

GLM25003SOF Mod. Giumax 2500 kit for 3 m ceiling fitting bar Machined steel (CNC) 1 Set

GLM25004SOF Mod. Giumax 2500 kit for 4 m ceiling fitting bar for double door Machined steel (CNC) 1 Set

GIUMAX - SLIDING DOORS from 6 to 10 mm in AISI 304 MOD: GIUMAX 3000

GLM3000/9 Pair of giumax 3000 carriages Machined steel (CNC) 1 Pair

GLM3000/15 Pair of giumax 3000 carriages Polished steel 1 Pair

UT200 Calliper tool for blind holes Ø 1.9 mm 1 Pc

GLMTND20/8 Round track 2000 mm Ø 20 mm with 5 holes Brushed steel 1 Pc

GLMTND20/15 Round track 2000 mm Ø 20 mm with 5 holes Polished steel 1 Pc

GLMTND30/8 Round track 3000 mm Ø 20 mm with 6 holes Brushed steel 1 Pc

GLMTND30/15 Round track 3000 mm Ø 20 mm with 6 holes Polished steel 1 Pc

GLMTND40/8 Round track 4000 mm Ø 20 mm with 7 holes Brushed steel 1 Pc

GLMBRM/9 Wall fitting Machined steel (CNC) 1 Pc

GLMBRM/15 Wall fitting Polished steel 1 Pc

GLMBRV/9 Glass fitting Machined steel (CNC) 1 Pc

GLMBRV/15 Glass fitting Polished steel 1 Pc

Art. Description Finish Q.ty EURO22,05

50,73

50,73

50,73

892,23

1.133,06

1.749,28

349,74

397,96

38,72

277,36

369,51

393,46

531,91

508,42

11,74

16,72

31,23

35,75

GLMDSTP/9 Side wall fitting Machined steel (CNC) 1 Pc

GLMDSTP/15 Side wall fitting Polished steel 1 Pc

GLMDSTV/9 Side glass fitting Machined steel (CNC) 1 Pc

GLMDSTV/15 Side glass fitting Polished steel 1 Pc

GLM3023/9 Oval stroke stop Machined steel (CNC) 1 Pc

GLM3023/15 Oval stroke stop Polished steel 1 Pc

057,3030,071/97 Lower adjustable floor guide 6/12.7mm Matt aluminium 1 Pc

057,3030,071/91 Lower adjustable floor guide 6/12.7mm Polished aluminium 1 Pc

057,3030,071/88 Lower adjustable floor guide 6/12.7mm Brushed steel-effect aluminium 1 Pc

GIUMAX - SLIDING DOORS from 6 to 10 mm in AISI 304 MOD: GIUMAX 3000 - DOOR DIAGRAMS

GLM30002MUR/8 Mod. Giumax 3000 2 m wall fitting bar kit Brushed steel 1 Set

GLM30002MUR/15 Mod. Giumax 3000 2 m wall fitting bar kit Polished steel 1 Set

GLM30003MUR/8 Mod. Giumax 3000 3 m wall fitting bar kit Brushed steel 1 Set

GLM30003MUR/15 Mod. Giumax 3000 3 m wall fitting bar kit Polished steel 1 Set

GLM30004MUR/8 Mod. Giumax 3000 kit for 4 m wall fitting bar for double door Brushed steel 1 Set

GLM30002VET/8 Mod. Giumax 3000 2 m glass fitting bar kit Brushed steel 1 Set

GLM30002VET/15 Mod. Giumax 3000 2 m glass fitting bar kit Polished steel 1 Set

GLM30003VET/8 Mod. Giumax 3000 3 m glass fitting bar kit Brushed steel 1 Set

GLM30003VET/15 Mod. Giumax 3000 3 m glass fitting bar kit Polished steel 1 Set

GLM30004VET/8 Mod. Giumax 3000 kit for 4 m glass fitting bar for double door Brushed steel 1 Set

STEEL SYSTEMS FOR SLIDING DOORS

Page 68

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 349/354 >>>

41,22

44,64

64,22

77,74

27,98

31,61

50,73

50,73

50,73

792,50

965,04

920,34

1.144,16

1.503,47

889,93

1.060,15

1.037,25

1.258,30

1.639,87

STEEL SYSTEMS FOR SLIDING DOORS

Page 69 >>> CATALOGUE REFERENCE PAGE 356/360 >>>

GIUMAX - SLIDING DOORS from 6 to 12.7 mm in AISI 304 MOD: GIUMAX 3200

GLM7000/9 Roller carriages giumax 7000 Machined steel (CNC) 1 Set

GLM7000/15 Roller carriages giumax 7000 Polished steel 1 Set

UT200 Calliper tool for blind holes Ø 1.9 mm 1 Pc

GLMTND20/8 Round track 2000 mm Ø 20 mm with 5 holes Brushed steel 1 Pc

GLMTND20/15 Round track 2000 mm Ø 20 mm with 5 holes Polished steel 1 Pc

GLMTND30/8 Round track 3000 mm Ø 20 mm with 6 holes Brushed steel 1 Pc

GLMTND30/15 Round track 3000 mm Ø 20 mm with 6 holes Polished steel 1 Pc

GLMTND40/8 Round track 4000 mm Ø 20 mm with 7 holes Brushed steel 1 Pc

GLMBRM/9 Wall fitting Machined steel (CNC) 1 Pc

GLMBRM/15 Wall fitting Polished steel 1 Pc

GLMDSTP/9 Side wall fitting Machined steel (CNC) 1 Pc

GLMDSTP/15 Side wall fitting Polished steel 1 Pc

GLMDSTV/9 Side glass fitting Machined steel (CNC) 1 Pc

GLMDSTV/15 Side glass fitting Polished steel 1 Pc

GLM3020/9 Stroke stop Machined steel (CNC) 1 Pc

GLM3020/15 Stroke stop Polished steel 1 Pc

057,3030,071/97 Lower adjustable floor guide 6/12.7mm Matt aluminium 1 Pc

057,3030,071/91 Lower adjustable floor guide 6/12.7mm Polished aluminium 1 Pc

057,3030,071/88 Lower adjustable floor guide 6/12.7mm Brushed steel-effect aluminium 1 Pc

GIUMAX - SLIDING DOORS from 6 to 12.7 mm in AISI 304 MOD: GIUMAX 3200 - DOOR DIAGRAMS

GLM32002PAR/8 Mod. Giumax 3200 2 m wall fitting bar kit Brushed steel 1 Set

GLM32002PAR/15 Mod. Giumax 3200 2 m wall fitting bar kit Polished steel 1 Set

GLM32003PAR/8 Mod. Giumax 3200 3 m wall fitting bar kit Brushed steel 1 Set

GLM32003PAR/15 Mod. Giumax 3200 3 m wall fitting bar kit Polished steel 1 Set

GLM32004PAR/8 Mod. Giumax 3200 kit for 4 m wall fitting bar for double door Brushed steel 1 Set

Art. Description Finish Q.ty EURO

229,83

258,86

38,72

277,36

369,51

393,46

531,91

508,42

11,74

16,72

41,22

44,64

64,22

77,74

15,94

17,44

50,73

50,73

50,73

766,17

922,75

894,01

1.101,87

1.450,81

GIUMAX - SLIDING DOORS in AISI 304 MOD: GIUMAX 3500

GNW3500/9 Pair of carriages 3500 wood Machined steel (CNC) 1 Pair

GNW3500/15 Pair of carriages 3500 wood Polished steel 1 Pair

UT200 Calliper tool for blind holes Ø 1.9 mm 1 Pc

GLMTND20/8 Round track 2000 mm Ø 20 mm with 5 holes Brushed steel 1 Pc

GLMTND20/15 Round track 2000 mm Ø 20 mm with 5 holes Polished steel 1 Pc

GLMTND30/8 Round track 3000 mm Ø 20 mm with 6 holes Brushed steel 1 Pc

GLMTND30/15 Round track 3000 mm Ø 20 mm with 6 holes Polished steel 1 Pc

GLMTND40/8 Round track 4000 mm Ø 20 mm with 7 holes Brushed steel 1 Pc

GNW20/9 Wall fitting Machined steel (CNC) 1 Pc

GNW20/15 Wall fitting Polished steel 1 Pc

GLMDSTP/9 Side wall fitting Machined steel (CNC) 1 Pc

GLMDSTP/15 Side wall fitting Polished steel 1 Pc

GLMDSTV/9 Side glass fitting Machined steel (CNC) 1 Pc

GLMDSTV/15 Side glass fitting Polished steel 1 Pc

GLM3023/9 Oval stroke stop Machined steel (CNC) 1 Pc

GLM3023/15 Oval stroke stop Polished steel 1 Pc

057.3010.001/6 Lower guide for wood Black 1 Pc

GIUMAX - SLIDING DOORS in AISI 304 MOD: GIUMAX 3500 - DOOR DIAGRAMS

GNW35002/8 Mod. Giumax 3500 kit for 2 m wall fitting bar Brushed steel 1 Set

GNW35002/15 Mod. Giumax 3500 kit for 2 m wall fitting bar Polished steel 1 Set

GNW35003/8 Mod. Giumax 3500 kit for 3 m wall fitting bar Brushed steel 1 Set

GNW35003/15 Mod. Giumax 3500 kit for 3 m wall fitting bar Polished steel 1 Set

GNW35004/8 Mod. Giumax 3500 kit for 4 m wall fitting bar for double door Brushed steel 1 Set

STEEL SYSTEMS FOR SLIDING DOORS

Page 70

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 362/365 >>>

287,12

318,16

38,72

277,36

369,51

393,46

531,91

508,42

18,70

20,25

41,22

44,64

64,22

77,74

27,98

31,61

4,56

718,52

856,73

853,33

1.039,39

1.334,64

STEEL SYSTEMS FOR SLIDING DOORS

Page 71 >>> CATALOGUE REFERENCE PAGE 367/371 >>>

GIUMAX - SLIDING DOORS from 6 to 12.7 mm in AISI 304 MOD: GIUMAX 7000 CEILING FIXING

GLM7000/9 Roller carriages giumax 7000 Machined steel (CNC) 1 Set

GLM7000/15 Roller carriages giumax 7000 Polished steel 1 Set

UT200 Calliper tool for blind holes Ø 1.9 mm 1 Pc

GLMTND20/8 Round track 2000 mm Ø 20 mm with 5 holes Brushed steel 1 Pc

GLMTND20/15 Round track 2000 mm Ø 20 mm with 5 holes Polished steel 1 Pc

GLMTND30/8 Round track 3000 mm Ø 20 mm with 6 holes Brushed steel 1 Pc

GLMTND30/15 Round track 3000 mm Ø 20 mm with 6 holes Polished steel 1 Pc

GLMTND40/8 Round track 4000 mm Ø 20 mm with 7 holes Brushed steel 1 Pc

GLMSST/9 Ceiling fitting Machined steel (CNC) 1 Pc

GLMSST/15 Ceiling fitting Polished steel 1 Pc

GLM3020/9 Stroke stop Machined steel (CNC) 1 Pc

GLM3020/15 Stroke stop Polished steel 1 Pc

057,3030,071/97 Lower adjustable floor guide 6/12.7mm Matt aluminium 1 Pc

057,3030,071/91 Lower adjustable floor guide 6/12.7mm Polished aluminium 1 Pc

057,3030,071/88 Lower adjustable floor guide 6/12.7mm Brushed steel-effect aluminium 1 Pc

GIUMAX - SLIDING DOORS from 6 to 12.7 mm in AISI 304 MOD: GIUMAX 7000 CEILING FIXING - DOOR DIAGRAMS

GLM70002PLA/8 Model giumax 7000 X 2000 mm bar ceiling fitting. Brushed steel 1 Set

Maximum Length 1000 mm

GLM70002PLA/15 Model giumax 7000 X 2000 mm bar ceiling fitting. Polished steel 1 Set

Maximum Length 1000 mm

GLM70003PLA/8 Model giumax 7000 X 3000 mm bar ceiling fitting. Brushed steel 1 Set

Maximum Width 1500 mm

GLM70003PLA/15 Model giumax 7000 X 3000 mm bar ceiling fitting. Polished steel 1 Set

Maximum Width 1500 mm

GLM70004PLA/8 Model giumax 7000 X 4000 mm bar ceiling fitting. Brushed steel 1 Set

Maximum Width 2000 mm

Art. Description Finish Q.ty EURO

229,83

258,86

38,72

277,36

369,51

393,46

531,91

508,42

70,91

84,68

15,94

17,44

50,73

50,73

50,73

1.062,01

1.262,54

1.249,02

1.509,63

1.864,99

Mod. LMS6201 WALL MOUNTING

LMS75/97 LMS75 accessories set for glass pane max 75 Kg thickness 8/12.76 mm Matt aluminium 1 Set

LMS75/88 LMS75 accessories set for glass pane max 75 Kg thickness 8/12.76 mm Brushed steel-effect aluminium 1 Set

LMS75/6 LMS75 accessories set for glass pane max 75 Kg thickness 8/12.76 mm Matt black 1 Set

LMS105/97 LMS105 accessories set for glass pane max 105 Kg thickness 8/12.76 mm Matt aluminium 1 Set

LMS105/88 LMS105 accessories set for glass pane max 105 Kg thickness 8/12.76 mm Brushed steel-effect aluminium 1 Set

LMS105/6 LMS105 accessories set for glass pane max 105 Kg thickness 8/12.76 mm Matt black 1 Set

LMSB6220/97 LMSB62 Track length 2000 mm Matt aluminium 1 Pc

LMSB6220/88 LMSB62 Track length 2000 mm Brushed steel-effect aluminium 1 Pc

LMSB6220/6 LMSB62 Track length 2000 mm Matt black 1 Pc

LMSB6230/97 LMSB62 Track length 3000 mm Matt aluminium 1 Pc

LMSB6230/88 LMSB62 Track length 3000 mm Brushed steel-effect aluminium 1 Pc

LMSB6230/6 LMSB62 Track length 3000 mm Matt black 1 Pc

LMSB6240/97 LMSB62 Track length 4000 mm Matt aluminium 1 Pc

LMSB6240/88 LMSB62 Track length 4000 mm Brushed steel-effect aluminium 1 Pc

LMSB6240/6 LMSB62 Track length 4000 mm Matt black 1 Pc

LMSB6260/97 LMSB62 Track length 6000 mm Matt aluminium 1 Pc

LMSB6260/88 LMSB62 Track length 6000 mm Brushed steel-effect aluminium 1 Pc

LMSB6260/6 LMSB62 Track length 6000 mm Matt black 1 Pc

●LMSC7220/97 LMSC72 cover length 2000 mm Matt aluminium 1 Pc

●LMSC7220/88 LMSC72 cover length 2000 mm Brushed steel-effect aluminium 1 Pc

●LMSC7220/6 LMSC72 cover length 2000 mm Matt black 1 Pc

●LMSC7230/97 LMSC72 cover length 3000 mm Matt aluminium 1 Pc

●LMSC7230/88 LMSC72 cover length 3000 mm Brushed steel-effect aluminium 1 Pc

●LMSC7230/6 LMSC72 cover length 3000 mm Matt black 1 Pc

●LMSC7240/97 LMSC72 cover length 4000 mm Matt aluminium 1 Pc

●LMSC7240/88 LMSC72 cover length 4000 mm Brushed steel-effect aluminium 1 Pc

●LMSC7240/6 LMSC72 cover length 4000 mm Matt black 1 Pc

●LMSC7260/97 LMSC72 cover length 6000 mm Matt aluminium 1 Pc

●LMSC7260/88 LMSC72 cover length 6000 mm Brushed steel-effect aluminium 1 Pc

●LMSC7260/6 LMSC72 cover length 6000 mm Matt black 1 Pc

LMST01/97 LMST01 aluminium caps Matt aluminium 1 Pair

LMST01/88 LMST01 aluminium caps Brushed steel-effect aluminium 1 Pair

LMST01/6 LMST01 aluminium caps Matt black 1 Pair

Mod. LMS6201 WALL MOUNTING MAX 75 KG - Door kit

LMS627520/97 Complete kit - opening width W.max 955 mm wall mount, max 75 Kg Matt aluminium 1 Set

LMS627520/88 Complete kit - opening width W.max 955 mm wall mount, max 75 Kg Brushed steel-effect aluminium 1 Set

LMS627520/6 Complete kit - opening width W.max 955 mm wall mount, max 75 Kg Matt black 1 Set

LMS627530/97 Complete kit - opening width W.max 1455 mm wall mount, max 75 Kg Matt aluminium 1 Set

LMS627530/88 Complete kit - opening width W.max 1455 mm wall mount, max 75 Kg Brushed steel-effect aluminium 1 Set

LMS627530/6 Complete kit - opening width W.max 1455 mm wall mount, max 75 Kg Matt black 1 Set

ALUMINIUM SYSTEMS FOR SLIDING DOORS

Page 72

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 377/380 >>>

S=20

LARGHEZZA MAX VANO 1450mm

mod. LM313000

S=20

301,02

298,90

305,87

368,76

366,64

373,61

124,45

132,09

134,00

179,83

191,29

194,16

235,21

250,49

254,32

332,29

355,21

360,96

38,34

40,34

40,84

50,67

53,66

54,41

63,00

66,99

67,98

73,98

79,95

81,45

17,68

26,80

24,52

477,17

492,20

498,90

533,59

552,64

560,34

ALUMINIUM SYSTEMS FOR SLIDING DOORS

Page 73 >>> CATALOGUE REFERENCE PAGE 380/384 >>>

LMS627540/97 Complete kit - opening width W.max 1950 mm wall mount, double door max 75Kg Matt aluminium 1 Set

LMS627540/88 Complete kit - opening width W.max 1950 mm wall mount, double door max 75Kg Brushed steel-effect aluminium 1 Set

LMS627540/6 Complete kit - opening width W.max 1950 mm wall mount, double door max 75Kg Matt black 1 Set

Mod. LMS6201 WALL MOUNTING MAX 105 KG - Door kit

LMS6210520/97 Complete kit - opening width W.max 955 mm wall mount, max 105Kg Matt aluminium 1 Set

LMS6210520/88 Complete kit - opening width W.max 955 mm wall mount, max 105Kg Brushed steel-effect aluminium 1 Set

LMS6210520/6 Complete kit - opening width W.max 955 mm wall mount, max 105Kg Matt black 1 Set

LMS6210530/97 Complete kit - opening width W.max 1455 mm wall mount, max 105Kg Matt aluminium 1 Set

LMS6210530/88 Complete kit - opening width W.max 1455 mm wall mount, max 105Kg Brushed steel-effect aluminium 1 Set

LMS6210530/6 Complete kit - opening width W.max 1455 mm wall mount, max 105Kg Matt black 1 Set

LMS6210540/97 Complete kit - opening width W.max 1950 mm wall mount, double door max 105Kg Matt aluminium 1 Set

LMS6210540/88 Complete kit - opening width W.max 1950 mm wall mount, double door max 105Kg Brushed steel-effect aluminium 1 Set

LMS6210540/6 Complete kit - opening width W.max 1950 mm wall mount, double door max 105Kg Matt black 1 Set

Mod. LMS6402 CEILING MOUNTING

LMS105/97 LMS105 accessories set for glass pane max 105 Kg thickness 8/12.76 mm Matt aluminium 1 Set

LMS105/88 LMS105 accessories set for glass pane max 105 Kg thickness 8/12.76 mm Brushed steel-effect aluminium 1 Set

LMS105/6 LMS105 accessories set for glass pane max 105 Kg thickness 8/12.76 mm Matt black 1 Set

LMSB6420/97 LMSB64 Track length 2000 mm Matt aluminium 1 Pc

LMSB6420/88 LMSB64 Track length 2000 mm Brushed steel-effect aluminium 1 Pc

LMSB6420/6 LMSB64 Track length 2000 mm Matt black 1 Pc

LMSB6430/97 LMSB64 Track length 3000 mm Matt aluminium 1 Pc

LMSB6430/88 LMSB64 Track length 3000 mm Brushed steel-effect aluminium 1 Pc

LMSB6430/6 LMSB64 Track length 3000 mm Matt black 1 Pc

LMSB6440/97 LMSB64 Track length 4000 mm Matt aluminium 1 Pc

LMSB6440/88 LMSB64 Track length 4000 mm Brushed steel-effect aluminium 1 Pc

LMSB6440/6 LMSB64 Track length 4000 mm Matt black 1 Pc

LMSB6460/97 LMSB64 Track length 6000 mm Matt aluminium 1 Pc

LMSB6460/88 LMSB64 Track length 6000 mm Brushed steel-effect aluminium 1 Pc

LMSB6460/6 LMSB64 Track length 6000 mm Matt black 1 Pc

●LMSC7220/97 LMSC72 cover length 2000 mm Matt aluminium 1 Pc

●LMSC7220/88 LMSC72 cover length 2000 mm Brushed steel-effect aluminium 1 Pc

●LMSC7220/6 LMSC72 cover length 2000 mm Matt black 1 Pc

●LMSC7230/97 LMSC72 cover length 3000 mm Matt aluminium 1 Pc

●LMSC7230/88 LMSC72 cover length 3000 mm Brushed steel-effect aluminium 1 Pc

●LMSC7230/6 LMSC72 cover length 3000 mm Matt black 1 Pc

●LMSC7240/97 LMSC72 cover length 4000 mm Matt aluminium 1 Pc

●LMSC7240/88 LMSC72 cover length 4000 mm Brushed steel-effect aluminium 1 Pc

●LMSC7240/6 LMSC72 cover length 4000 mm Matt black 1 Pc

●LMSC7260/97 LMSC72 cover length 6000 mm Matt aluminium 1 Pc

●LMSC7260/88 LMSC72 cover length 6000 mm Brushed steel-effect aluminium 1 Pc

●LMSC7260/6 LMSC72 cover length 6000 mm Matt black 1 Pc

Art. Description Finish Q.ty EURO

LARGHEZZA MAX VANO 1955mm

mod. LM314000

S=20

LARGHEZZA MAX VANO 1450mm

mod. LM313000

S=20

LARGHEZZA MAX VANO 1955mm

mod. LM314000

891,04

911,98

927,65

544,91

559,94

566,64

601,34

620,38

628,09

1.026,52

1.047,47

1.063,14

368,76

366,64

373,61

124,45

132,09

134,00

179,83

191,29

194,16

235,21

250,49

254,32

332,29

355,21

360,96

38,34

40,34

40,84

50,67

53,66

54,41

63,00

66,99

67,98

73,98

79,95

81,45

LMST01/97 LMST01 aluminium caps Matt aluminium 1 Pair

LMST01/88 LMST01 aluminium caps Brushed steel-effect aluminium 1 Pair

LMST01/6 LMST01 aluminium caps Matt black 1 Pair

Mod. LMS6402 CEILING MOUNTING MAX 105 KG - Door kit

LMS64200/97 Compl. kit-opening width W.max 955mm ceiling mount, max 105 Kg Matt aluminium 1 Set

LMS64200/88 Compl. kit-opening width W.max 955mm ceiling mount, max 105 Kg Brushed steel-effect aluminium 1 Set

LMS64200/6 Compl. kit-opening width W.max 955mm ceiling mount, max 105 Kg Matt black 1 Set

LMS64300/97 Compl. kit-opening width W.max 1455mm ceiling mount, max 105 Kg Matt aluminium 1 Set

LMS64300/88 Compl. kit-opening width W.max 1455mm ceiling mount, max 105 Kg Brushed steel-effect aluminium 1 Set

LMS64300/6 Compl. kit-opening width W.max 1455mm ceiling mount, max 105 Kg Matt black 1 Set

LMS64400/97 Compl. kit-opening width W.max 1950mm ceiling mount, double door max 105Kg Matt aluminium 1 Set

LMS64400/88 Compl. kit-opening width W.max 1950mm ceiling mount, double door max 105Kg Brushed steel-effect aluminium 1 Set

LMS64400/6 Compl. kit-opening width W.max 1950mm ceiling mount, double door max 105Kg Matt black 1 Set

Mod. LMSBF5601 WALL MOUNTING WITH FIXED GLASS

LMS105/97 LMS105 accessories set for glass pane max 105 Kg thickness 8/12.76 mm Matt aluminium 1 Set

LMS105/88 LMS105 accessories set for glass pane max 105 Kg thickness 8/12.76 mm Brushed steel-effect aluminium 1 Set

LMS105/6 LMS105 accessories set for glass pane max 105 Kg thickness 8/12.76 mm Matt black 1 Set

LMSBF5620/97 LMSBF56 Track length 2000 mm Matt aluminium 1 Pc

LMSBF5620/88 LMSBF56 Track length 2000 mm Brushed steel-effect aluminium 1 Pc

LMSBF5620/6 LMSBF56 Track length 2000 mm Matt black 1 Pc

LMSBF5630/97 LMSBF56 Track length 3000 mm Matt aluminium 1 Pc

LMSBF5630/88 LMSBF56 Track length 3000 mm Brushed steel-effect aluminium 1 Pc

LMSBF5630/6 LMSBF56 Track length 3000 mm Matt black 1 Pc

LMSBF5640/97 LMSBF56 Track length 4000 mm Matt aluminium 1 Pc

LMSBF5640/88 LMSBF56 Track length 4000 mm Brushed steel-effect aluminium 1 Pc

LMSBF5640/6 LMSBF56 Track length 4000 mm Matt black 1 Pc

LMSBF5660/97 LMSBF56 Track length 6000 mm Matt aluminium 1 Pc

LMSBF5660/88 LMSBF56 Track length 6000 mm Brushed steel-effect aluminium 1 Pc

LMSBF5660/6 LMSBF56 Track length 6000 mm Matt black 1 Pc

●LMSC7220/97 LMSC72 cover length 2000 mm Matt aluminium 1 Pc

●LMSC7220/88 LMSC72 cover length 2000 mm Brushed steel-effect aluminium 1 Pc

●LMSC7220/6 LMSC72 cover length 2000 mm Matt black 1 Pc

●LMSC7230/97 LMSC72 cover length 3000 mm Matt aluminium 1 Pc

●LMSC7230/88 LMSC72 cover length 3000 mm Brushed steel-effect aluminium 1 Pc

●LMSC7230/6 LMSC72 cover length 3000 mm Matt black 1 Pc

●LMSC7240/97 LMSC72 cover length 4000 mm Matt aluminium 1 Pc

●LMSC7240/88 LMSC72 cover length 4000 mm Brushed steel-effect aluminium 1 Pc

●LMSC7240/6 LMSC72 cover length 4000 mm Matt black 1 Pc

●LMSC7260/97 LMSC72 cover length 6000 mm Matt aluminium 1 Pc

●LMSC7260/88 LMSC72 cover length 6000 mm Brushed steel-effect aluminium 1 Pc

●LMSC7260/6 LMSC72 cover length 6000 mm Matt black 1 Pc

ALUMINIUM SYSTEMS FOR SLIDING DOORS

Page 74

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 384/389 >>>

S=20

LARGHEZZA MAX VANO 1450mm

mod. LM313000

S=20

LARGHEZZA MAX VANO 1955mm

mod. LM314000

17,68

26,80

24,52

544,91

559,94

566,64

601,34

620,38

628,09

1.026,52

1.047,47

1.063,14

368,76

366,64

373,61

141,78

151,02

153,30

205,83

219,69

223,11

269,88

288,36

292,92

384,29

412,01

418,85

38,34

40,34

40,84

50,67

53,66

54,41

63,00

66,99

67,98

73,98

79,95

81,45

ALUMINIUM SYSTEMS FOR SLIDING DOORS

Page 75 >>> CATALOGUE REFERENCE PAGE 389/394 >>>

LMC13.150/97 Finishing profile LMC13 length 1498 mm Matt aluminium 1 Pc

LMC13.150/88 Finishing profile LMC13 length 1498 mm Brushed steel-effect aluminium 1 Pc

LMC13.150/6 Finishing profile LMC13 length 1498 mm Matt black 1 Pc

●LMC13/97 Finishing profile LMC13 length 3000 mm Matt aluminium 1 Pc

●LMC13/88 Finishing profile LMC13 length 3000 mm Brushed steel-effect aluminium 1 Pc

●LMC13/6 Finishing profile LMC13 length 3000 mm Matt black 1 Pc

GTUP2 Glass holder profile - Thickness: 2mm Transparent Per m

GTUP2300 Glass holder profile pack 300 m Transparent 1 Set

GTUP2G Glass holder profile - Thickness: 2mm Embossed Per m

GTUP2300G Glass holder profile pack 300 m Embossed 1 Set

●PBD3185/97 Side compensation profile for fixed glass L. 3000 mm 15 x 16 mm Matt aluminium 1 Pc

●PBD3185/88 Side compensation profile for fixed glass L. 3000 mm 15 x 16 mm Brushed steel-effect aluminium 1 Pc

●PBD3185/6 Side compensation profile for fixed glass L. 3000 mm 15 x 16 mm Matt black 1 Pc

PBD3185.150/97 Side compensation profile for fixed glass L. 1498 mm 15 x 16 mm Matt aluminium 1 Pc

PBD3185.150/88 Side compensation profile for fixed glass L. 1498 mm 15 x 16 mm Brushed steel-effect aluminium 1 Pc

PBD3185.150/6 Side compensation profile for fixed glass L. 1498 mm 15 x 16 mm Matt black 1 Pc

LMST03/97 LMST03 aluminium caps Matt aluminium 1 Pair

LMST03/88 LMST03 aluminium caps Brushed steel-effect aluminium 1 Pair

LMST03/6 LMST03 aluminium caps Matt black 1 Pair

Mod. LMSBF5601 WALL MOUNT WITH FIXED GLASS MAX 105 KG - Door kit

LMSBF56200/97 Compl. kit-opening width W.max 955mm wall mount with fixed, max 105Kg Matt aluminium 1 Set

LMSBF56200/88 Compl. kit-opening width W.max 955mm wall mount with fixed, max 105Kg Brushed steel-effect aluminium 1 Set

LMSBF56200/6 Compl. kit-opening width W.max 955mm wall mount with fixed, max 105Kg Matt black 1 Set

LMSBF56300/97 Compl. kit-opening width W.max 1455mm wall mount with fixed, max 105Kg Matt aluminium 1 Set

LMSBF56300/88 Compl. kit-opening width W.max 1455mm wall mount with fixed, max 105Kg Brushed steel-effect aluminium 1 Set

LMSBF56300/6 Compl. kit-opening width W.max 1455mm wall mount with fixed, max 105Kg Matt black 1 Set

LMSBF56400/97 Complete kit - opening width W.max 1950 mm wall mount with fixed, Matt aluminium 1 Set

double door max 105 Kg

LMSBF56400/88 Complete kit - opening width W.max 1950 mm wall mount with fixed, Brushed steel-effect aluminium 1 Set

double door max 105 Kg

LMSBF56400/6 Complete kit - opening width W.max 1950 mm wall mount with fixed, Matt black 1 Set

double door max 105 Kg

Mod. LMSBF8501 CEILING MOUNT WITH FIXED GLASS

LMS105/97 LMS105 accessories set for glass pane max 105 Kg thickness 8/12.76 mm Matt aluminium 1 Set

LMS105/88 LMS105 accessories set for glass pane max 105 Kg thickness 8/12.76 mm Brushed steel-effect aluminium 1 Set

LMS105/6 LMS105 accessories set for glass pane max 105 Kg thickness 8/12.76 mm Matt black 1 Set

LMSBF8520/97 LMSBF85 Track length 2000 mm Matt aluminium 1 Pc

LMSBF8520/88 LMSBF85 Track length 2000 mm Brushed steel-effect aluminium 1 Pc

LMSBF8520/6 LMSBF85 Track length 2000 mm Matt black 1 Pc

LMSBF8530/97 LMSBF85 Track length 3000 mm Matt aluminium 1 Pc

LMSBF8530/88 LMSBF85 Track length 3000 mm Brushed steel-effect aluminium 1 Pc

LMSBF8530/6 LMSBF85 Track length 3000 mm Matt black 1 Pc

Art. Description Finish Q.ty EURO

LARGHEZZA MAX VANO 950mm

mod. LM312000

S=20 S=20LARGHEZZA MAX VANO 950mm

mod. LM312000

S=20 S=20

LARGHEZZA MAX VANO 1955mm

mod. LM314000

S=20 S=20

13,62

14,03

14,49

13,55

14,37

15,30

0,86

256,61

1,25

376,35

34,01

36,88

98,51

32,97

34,41

65,22

17,68

26,80

24,52

594,25

611,99

641,39

658,64

682,08

734,65

1.091,00

1.117,34

1.178,42

368,76

366,64

373,61

141,78

151,02

153,30

205,83

219,69

223,11

LMSBF8540/97 LMSBF85 Track length 4000 mm Matt aluminium 1 Pc

LMSBF8540/88 LMSBF85 Track length 4000 mm Brushed steel-effect aluminium 1 Pc

LMSBF8540/6 LMSBF85 Track length 4000 mm Matt black 1 Pc

LMSBF8560/97 LMSBF85 Track length 6000 mm Matt aluminium 1 Pc

LMSBF8560/88 LMSBF85 Track length 6000 mm Brushed steel-effect aluminium 1 Pc

LMSBF8560/6 LMSBF85 Track length 6000 mm Matt black 1 Pc

●LMSC7220/97 LMSC72 cover length 2000 mm Matt aluminium 1 Pc

●LMSC7220/88 LMSC72 cover length 2000 mm Brushed steel-effect aluminium 1 Pc

●LMSC7220/6 LMSC72 cover length 2000 mm Matt black 1 Pc

●LMSC7230/97 LMSC72 cover length 3000 mm Matt aluminium 1 Pc

●LMSC7230/88 LMSC72 cover length 3000 mm Brushed steel-effect aluminium 1 Pc

●LMSC7230/6 LMSC72 cover length 3000 mm Matt black 1 Pc

●LMSC7240/97 LMSC72 cover length 4000 mm Matt aluminium 1 Pc

●LMSC7240/88 LMSC72 cover length 4000 mm Brushed steel-effect aluminium 1 Pc

●LMSC7240/6 LMSC72 cover length 4000 mm Matt black 1 Pc

●LMSC7260/97 LMSC72 cover length 6000 mm Matt aluminium 1 Pc

●LMSC7260/88 LMSC72 cover length 6000 mm Brushed steel-effect aluminium 1 Pc

●LMSC7260/6 LMSC72 cover length 6000 mm Matt black 1 Pc

LMC13.150/97 Finishing profile LMC13 length 1498 mm Matt aluminium 1 Pc

LMC13.150/88 Finishing profile LMC13 length 1498 mm Brushed steel-effect aluminium 1 Pc

LMC13.150/6 Finishing profile LMC13 length 1498 mm Matt black 1 Pc

●LMC13/97 Finishing profile LMC13 length 3000 mm Matt aluminium 1 Pc

●LMC13/88 Finishing profile LMC13 length 3000 mm Brushed steel-effect aluminium 1 Pc

●LMC13/6 Finishing profile LMC13 length 3000 mm Matt black 1 Pc

GTUP2 Glass holder profile - Thickness: 2mm Transparent Per m

GTUP2300 Glass holder profile pack 300 m Transparent 1 Set

GTUP2G Glass holder profile - Thickness: 2mm Embossed Per m

GTUP2300G Glass holder profile pack 300 m Embossed 1 Set

●PBD3185/97 Side compensation profile for fixed glass L. 3000 mm 15 x 16 mm Matt aluminium 1 Pc

●PBD3185/88 Side compensation profile for fixed glass L. 3000 mm 15 x 16 mm Brushed steel-effect aluminium 1 Pc

●PBD3185/6 Side compensation profile for fixed glass L. 3000 mm 15 x 16 mm Matt black 1 Pc

PBD3185.150/97 Side compensation profile for fixed glass L. 1498 mm 15 x 16 mm Matt aluminium 1 Pc

PBD3185.150/88 Side compensation profile for fixed glass L. 1498 mm 15 x 16 mm Brushed steel-effect aluminium 1 Pc

PBD3185.150/6 Side compensation profile for fixed glass L. 1498 mm 15 x 16 mm Matt black 1 Pc

Mod. LMSBF8501 CEILING MOUNT WITH FIXED GLASS MAX 105 KG - door kit

LMSBF85200/97 Compl. kit-opening width W.max 950mm ceiling mount with fixed, max 105Kg Matt aluminium 1 Set

LMSBF85200/88 Compl. kit-opening width W.max 950mm ceiling mount with fixed, max 105Kg Brushed steel-effect aluminium 1 Set

LMSBF85200/6 Compl. kit-opening width W.max 950mm ceiling mount with fixed, max 105Kg Matt black 1 Set

LMSBF85300/97 Compl. kit-opening width W.max 1450mm ceiling mount with fixed, max 105Kg Matt aluminium 1 Set

LMSBF85300/88 Compl. kit-opening width W.max 1450mm ceiling mount with fixed, max 105Kg Brushed steel-effect aluminium 1 Set

LMSBF85300/6 Compl. kit-opening width W.max 1450mm ceiling mount with fixed, max 105Kg Matt black 1 Set

LMSBF85400/97 Compl. kit-opening width W.max 1950mm ceiling m. fixed, double door max 105Kg Matt aluminium 1 Set

LMSBF85400/88 Compl. kit-opening width W.max 1950mm ceiling m. fixed, double door max 105Kg Brushed steel-effect aluminium 1 Set

LMSBF85400/6 Compl. kit-opening width W.max 1950mm ceiling m. fixed, double door max 105Kg Matt black 1 Set

ALUMINIUM SYSTEMS FOR SLIDING DOORS

Page 76

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 394/398 >>>

LARGHEZZA MAX VANO 950mm

mod. LM312000

S=20 S=20LARGHEZZA MAX VANO 950mm

mod. LM312000

S=20 S=20

LARGHEZZA MAX VANO 1955mm

mod. LM314000

S=20 S=20

269,88

288,36

292,92

384,29

412,01

418,85

38,34

40,34

40,84

50,67

53,66

54,41

63,00

66,99

67,98

73,98

79,95

81,45

13,62

14,03

14,49

13,55

14,37

15,30

0,86

256,61

1,25

376,35

34,01

36,88

98,51

32,97

34,41

65,22

576,58

585,19

616,87

640,97

655,28

710,13

1.073,32

1.090,54

1.153,90

ALUMINIUM SYSTEMS FOR SLIDING DOORS

Page 77 >>> CATALOGUE REFERENCE PAGE 400/403 >>>

Mod. LMGWSI INVISIBLE FOR RECESSED INSTALLATION

LMGW/97 LMGWF accessories set for glass pane Max 100kg thickness 8/10mm Matt aluminium 1 Set

LMGW/88 LMGWF accessories set for glass pane Max 100kg thickness 8/10mm Brushed steel-effect aluminium 1 Set

LMGWSIB200/97 LMGWSI aluminium track length 2000 mm Matt aluminium 1 Pc

LMGWSIB300/97 LMGWSI aluminium track length 3000 mm Matt aluminium 1 Pc

LMGWSIB400/97 LMGWSI aluminium track length 4000 mm Matt aluminium 1 Pc

LMGWSIB600/97 LMGWSI aluminium track length 6000 mm Matt aluminium 1 Pc

LMGWSIB200/88 LMGWSI aluminium track length 2000 mm Brushed steel-effect aluminium 1 Pc

LMGWSIB300/88 LMGWSI aluminium track length 3000 mm Brushed steel-effect aluminium 1 Pc

LMGWSIB400/88 LMGWSI aluminium track length 4000 mm Brushed steel-effect aluminiumm 1 Pc

LMGWSIB600/88 LMGWSI aluminium track length 6000 mm Brushed steel-effect aluminium 1 Pc

●057,3085,200/97 GW clamp cover length 2000 mm Matt aluminium 1 Pc

●057,3085,300/97 GW clamp cover length 3000 mm Matt aluminium 1 Pc

●057,3085,400/97 GW clamp cover length 4000 mm Matt aluminium 1 Pc

●057,3085,600/97 GW clamp cover length 6000 mm Matt aluminium 1 Pc

●057,3085,200/88 GW clamp cover length 2000 mm Brushed steel-effect aluminium 1 Pc

●057,3085,300/88 GW clamp cover length 3000 mm Brushed steel-effect aluminium 1 Pc

●057,3085,400/88 GW clamp cover length 4000 mm Brushed steel-effect aluminium 1 Pc

●057,3085,600/88 GW clamp cover length 6000 mm Brushed steel-effect aluminium 1 Pc

057,3078,002 Finish gasket to be inserted into the cover Black Per m

LMGF/97 LMGF floor guide Matt aluminium 1 Pc

LMGF/88 LMGF floor guide Brushed steel-effect aluminium 1 Pc

042,3102,071 Dämpfung- damper 60/100 kg White 1 Pc

042,3102,072 Dämpfung- damper 20/60 kg White 1 Pc

057,3099,071/97 Stop low Matt aluminium 1 Pc

Mod. LMGWSI INVISIBLE FOR RECESSED INSTALLATION - door kit

LMGWSI200/97 Complete kit - opening width W. max 930 mm recessed Matt aluminium 1 Set

LMGWSI200/88 Complete kit - opening width W. max 930 mm recessed Brushed steel-effect aluminium 1 Set

LMGWSI300/97 Complete kit - opening width W. max 1430 mm recessed Matt aluminium 1 Set

LMGWSI300/88 Complete kit - opening width W. max 1430 mm recessed Brushed steel-effect aluminium 1 Set

LMGWSI400/97 Complete kit - opening width W. max 1950 mm recessed double door Matt aluminium 1 Set

LMGWSI400/88 Complete kit - opening width W. max 1950 mm recessed double door Brushed steel-effect aluminium 1 Set

Art. Description Finish Q.ty EURO

LARGHEZZA MAX VANO 950mm

mod. LM312000

S=20

LARGHEZZA MAX VANO 1450mm

mod. LM313000

S=20

LARGHEZZA MAX VANO 1955mm

mod. LM314000

405,05

405,05

147,18

214,49

281,81

403,89

162,31

237,20

312,08

449,30

23,55

30,31

37,07

40,54

24,39

31,56

38,74

43,05

9,49

20,53

20,53

141,32

141,32

65,23

613,73

629,70

687,80

730,74

1.204,88

1.236,83

Mod. LMGWI RECESSED FITTING WITH FIXED GLASS

LMGW/97 LMGWF accessories set for glass pane Max 100 kg thickness 8/10 mm Matt aluminium 1 Set

LMGW/88 LMGWF accessories set for glass pane Max 100 kg thickness 8/10 mm Brushed steel-effect aluminium 1 Set

LMGWI.B200/97 GWI aluminium track length 2000 mm Matt aluminium 1 Pc

LMGWI.B300/97 GWI aluminium track length 3000 mm Matt aluminium 1 Pc

LMGWI.B400/97 GWI aluminium track length 4000 mm Matt aluminium 1 Pc

LMGWI.B600/97 GWI aluminium track length 6000 mm Matt aluminium 1 Pc

LMGWI.B200/88 GWI aluminium track length 2000 mm Brushed steel-effect aluminium 1 Pc

LMGWI.B300/88 GWI aluminium track length 3000 mm Brushed steel-effect aluminium 1 Pc

LMGWI.B400/88 GWI aluminium track length 4000 mm Brushed steel-effect aluminium 1 Pc

LMGWI.B600/88 GWI aluminium track length 6000 mm Brushed steel-effect aluminium 1 Pc

042,3005,100/97 Finishing profile for fixed glass seat length 1000 mm Matt aluminium 1 Pc

●042,3005,200/97 Finishing profile for fixed glass seat length 2000 mm Matt aluminium 1 Pc

●042,3005,300/97 Finishing profile for fixed glass seat length 3000 mm Matt aluminium 1 Pc

●042,3005,400/97 Finishing profile for fixed glass seat length 4000 mm Matt aluminium 1 Pc

●042,3005,600/97 Finishing profile for fixed glass seat length 6000 mm Matt aluminium 1 Pc

042,3005,100/88 Finishing profile for fixed glass seat length 1000 mm Brushed steel-effect aluminium 1 Pc

●042,3005,200/88 Finishing profile for fixed glass seat length 2000 mm Brushed steel-effect aluminium 1 Pc

●042,3005,300/88 Finishing profile for fixed glass seat length 3000 mm Brushed steel-effect aluminium 1 Pc

●042,3005,400/88 Finishing profile for fixed glass seat length 4000 mm Brushed steel-effect aluminium 1 Pc

●042,3005,600/88 Finishing profile for fixed glass seat length 6000 mm Brushed steel-effect aluminium 1 Pc

●057,3085,200/97 GW clamp cover length 2000 mm Matt aluminium 1 Pc

●057,3085,300/97 GW clamp cover length 3000 mm Matt aluminium 1 Pc

●057,3085,400/97 GW clamp cover length 4000 mm Matt aluminium 1 Pc

●057,3085,600/97 GW clamp cover length 6000 mm Matt aluminium 1 Pc

●057,3085,200/88 GW clamp cover length 2000 mm Brushed steel-effect aluminium 1 Pc

●057,3085,300/88 GW clamp cover length 3000 mm Brushed steel-effect aluminium 1 Pc

●057,3085,400/88 GW clamp cover length 4000 mm Brushed steel-effect aluminium 1 Pc

●057,3085,600/88 GW clamp cover length 6000 mm Brushed steel-effect aluminium 1 Pc

LMU20,150/97 “U” profile length 1498 mm Matt aluminium 1 Pc

●LMU20,300/97 “U” profile length 3000 mm Matt aluminium 1 Pc

LMU20,150/88 “U” profile length 1498 mm Brushed steel-effect aluminium 1 Pc

●LMU20,300/88 “U” profile length 3000 mm Brushed steel-effect aluminium 1 Pc

LMU20TP/97 “U” profile caps 20 x 16 x 1 mm Matt aluminium 1 Pc

LMU20TP/88 “U” profile caps 20 x 16 x 1 mm Brushed steel-effect aluminium 1 Pc

●PBD3185/97 Side compensation profile for fixed glass L. 3000 mm 15 x 16 mm Matt aluminium 1 Pc

●PBD3185/88 Side compensation profile for fixed glass L. 3000 mm 15 x 16 mm Brushed steel-effect aluminium 1 Pc

GTUP2 Glass holder profile - Thickness: 2mm Transparent Per m

GTUP2300 Glass holder profile pack 300 m Transparent 1 Set

GTUP3 Glass holder profile - Thickness: 3mm Transparent Per m

GTUP3250 Glass holder profile pack 250 m Transparent 1 Set

GTUP4 Glass holder profile - Thickness: 4mm Transparent Per m

GTUP4160 Glass holder profile pack 160 m Transparent 1 Set

ALUMINIUM SYSTEMS FOR SLIDING DOORS

Page 78

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 405/407 >>>

405,05

405,05

197,27

289,64

382,00

554,18

219,83

323,48

427,12

621,86

15,38

20,72

26,07

31,41

32,06

15,71

21,39

27,07

32,75

34,07

23,55

30,31

37,07

40,54

24,39

31,56

38,74

43,05

28,18

40,40

29,98

43,99

4,38

4,45

34,01

36,88

0,86

256,61

0,97

242,35

1,20

191,60

ALUMINIUM SYSTEMS FOR SLIDING DOORS

Page 79 >>> CATALOGUE REFERENCE PAGE 407/411 >>>

GTUP2G Glass holder profile - Thickness: 2mm Embossed Per m

GTUP2300G Glass holder profile pack 300 m Embossed 1 Set

GTUP3G Glass holder profile - Thickness: 3mm Embossed Per m

GTUP3250G Glass holder profile pack 250 m Embossed 1 Set

GTUP4G Glass holder profile - Thickness: 4mm Embossed Per m

GTUP4160G Glass holder profile pack 160 m Embossed 1 Set

057,3078,002 Finish gasket to be inserted into the cover Black Per m

LMGF/97 LMGF floor guide Matt aluminium 1 Pc

LMGF/88 LMGF floor guide Brushed steel-effect aluminium 1 Pc

042,3102,071 Dämpfung- damper 60/100 kg White 1 Pc

042,3102,072 Dämpfung- damper 20/60 kg White 1 Pc

Mod. LMGWI RECESSED FITTING PLUS FIXED - Door kit

LMGWI200/97 Complete kit - opening width W. max 950 mm recessed plus fixed Matt aluminium 1 Set

LMGWI200/88 Complete kit - opening width W. max 950 mm recessed plus fixed Brushed steel-effect aluminium 1 Set

LMGWI300/97 Complete kit - opening width W. max 1450 mm recessed plus fixed Matt aluminium 1 Set

LMGWI300/88 Complete kit - opening width W. max 1450 mm recessed plus fixed Brushed steel-effect aluminium 1 Set

LMGWI400/97 Complete kit - opening width W. max 1950 mm Matt aluminium 1 Set

recessed plus fixed double door

LMGWI400/88 Complete kit - opening width W. max 1950 mm Brushed steel-effect aluminium 1 Set

recessed plus fixed double door

Mod. LMGSWS CEILING FITTING

LMGW/97 LMGWF accessories set for glass pane Max 100 kg thickness 8/10 mm Matt aluminium 1 Set

LMGW/88 LMGWF accessories set for glass pane Max 100 kg thickness 8/10 mm Brushed steel-effect aluminium 1 Set

LMGWSB200/97 GWI aluminium track length 2000 mm Matt aluminium 1 Pc

LMGWSB300/97 GWI aluminium track length 3000 mm Matt aluminium 1 Pc

LMGWSB400/97 GWI aluminium track length 4000 mm Matt aluminium 1 Pc

LMGWSB600/97 GWI aluminium track length 6000 mm Matt aluminium 1 Pc

LMGWSB200/88 GWI aluminium track length 2000 mm Brushed steel-effect aluminium 1 Pc

LMGWSB300/88 GWI aluminium track length 3000 mm Brushed steel-effect aluminium 1 Pc

LMGWSB400/88 GWI aluminium track length 4000 mm Brushed steel-effect aluminium 1 Pc

LMGWSB600/88 GWI aluminium track length 6000 mm Brushed steel-effect aluminium 1 Pc

Art. Description Finish Q.ty EURO

LARGHEZZA MAX VANO 998mm

LMGWFi200

LARGHEZZA MAX VANO 1498mm

LMGWFi300

LARGHEZZA MAX VANO 1992mm

LMGWFi400

LARGHEZZA MAX VANO 998mm

LMGWFi200

LARGHEZZA MAX VANO 1498mm

LMGWFi300

LARGHEZZA MAX VANO 1992mm

LMGWFi400

1,25

376,35

1,43

356,40

1,60

255,46

9,49

20,53

20,53

141,32

141,32

716,04

721,48

852,55

866,14

1.361,92

1.439,52

405,05

405,05

197,27

289,64

382,00

554,18

219,83

323,48

427,12

621,86

●057,3085,200/97 GW clamp cover length 2000 mm Matt aluminium 1 Pc

●057,3085,300/97 GW clamp cover length 3000 mm Matt aluminium 1 Pc

●057,3085,400/97 GW clamp cover length 4000 mm Matt aluminium 1 Pc

●057,3085,600/97 GW clamp cover length 6000 mm Matt aluminium 1 Pc

●057,3085,200/88 GW clamp cover length 2000 mm Brushed steel-effect aluminium 1 Pc

●057,3085,300/88 GW clamp cover length 3000 mm Brushed steel-effect aluminium 1 Pc

●057,3085,400/88 GW clamp cover length 4000 mm Brushed steel-effect aluminium 1 Pc

●057,3085,600/88 GW clamp cover length 6000 mm Brushed steel-effect aluminium 1 Pc

057,3078,002 Finish gasket to be inserted into the cover Black Per m

LMGWST01/97 LMGWST01 aluminium caps Matt aluminium 1 Pair

LMGWST01/88 LMGWST01 aluminium caps Brushed steel-effect aluminium 1 Pair

Mod. LMGSWS CEILING FITTING - door kit

LMGWS200/97 Complete kit - opening width W.max 955 mm ceiling mount Matt aluminium 1 Set

LMGWS200/88 Complete kit - opening width W.max 955 mm ceiling mount Brushed steel-effect aluminium 1 Set

LMGWS300/97 Complete kit - opening width W.max 1455 mm ceiling mount Matt aluminium 1 Set

LMGWS300/88 Complete kit - opening width W.max 1455 mm ceiling mount Brushed steel-effect aluminium 1 Set

LMGWS400/97 Complete kit - opening width W. max 1950 mm Matt aluminium 1 Set

ceiling mount for double door

LMGWS400/88 Complete kit - opening width W. max 1950 mm Brushed steel-effect aluminium 1 Set

ceiling mount for double door

Mod. LMGWF CEILING FITTING PLUS FIXED

LMGW/97 LMGWF accessories set for glass pane Max 100kg thickness 8/10mm Matt aluminium 1 Set

LMGW/88 LMGWF accessories set for glass pane Max 100kg thickness 8/10mm Brushed steel-effect aluminium 1 Set

057,3084,200/97 GWF Track length 2000 mm Matt aluminium 1 Pc

057,3084,300/97 GWF Track length 3000 mm Matt aluminium 1 Pc

057,3084,400/97 GWF Track length 4000 mm Matt aluminium 1 Pc

057,3084,600/97 GWF Track length 6000 mm Matt aluminium 1 Pc

057,3084,200/88 GWF Track length 2000 mm Brushed steel-effect aluminium 1 Pc

057,3084,300/88 GWF Track length 3000 mm Brushed steel-effect aluminium 1 Pc

057,3084,400/88 GWF Track length 4000 mm Brushed steel-effect aluminium 1 Pc

057,3084,600/88 GWF Track length 6000 mm Brushed steel-effect aluminium 1 Pc

ALUMINIUM SYSTEMS FOR SLIDING DOORS

Page 80

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 412/416 >>>

LARGHEZZA MAX VANO 950mm

mod. LM312000

S=20

LARGHEZZA MAX VANO 1450mm

mod. LM313000

S=20

LARGHEZZA MAX VANO 1955mm

mod. LM314000

23,55

30,31

37,07

40,54

24,39

31,56

38,74

43,05

9,49

17,68

26,80

681,50

714,02

799,60

843,82

1.322,75

1.378,67

405,05

405,05

189,25

278,85

368,46

537,63

206,83

305,22

403,62

590,37

ALUMINIUM SYSTEMS FOR SLIDING DOORS

Page 81 >>> CATALOGUE REFERENCE PAGE 417/418 >>>

042,3005,100/97 Finishing profile for fixed glass seat length 1000 mm Matt aluminium 1 Pc

●042,3005,200/97 Finishing profile for fixed glass seat length 2000 mm Matt aluminium 1 Pc

●042,3005,300/97 Finishing profile for fixed glass seat length 3000 mm Matt aluminium 1 Pc

●042,3005,400/97 Finishing profile for fixed glass seat length 4000 mm Matt aluminium 1 Pc

●042,3005,600/97 Finishing profile for fixed glass seat length 6000 mm Matt aluminium 1 Pc

042,3005,100/88 Finishing profile for fixed glass seat length 1000 mm Brushed steel-effect aluminium 1 Pc

●042,3005,200/88 Finishing profile for fixed glass seat length 2000 mm Brushed steel-effect aluminium 1 Pc

●042,3005,300/88 Finishing profile for fixed glass seat length 3000 mm Brushed steel-effect aluminium 1 Pc

●042,3005,400/88 Finishing profile for fixed glass seat length 4000 mm Brushed steel-effect aluminium 1 Pc

●042,3005,600/88 Finishing profile for fixed glass seat length 6000 mm Brushed steel-effect aluminium 1 Pc

●057,3085,200/97 GW clamp cover length 2000 mm Matt aluminium 1 Pc

●057,3085,300/97 GW clamp cover length 3000 mm Matt aluminium 1 Pc

●057,3085,400/97 GW clamp cover length 4000 mm Matt aluminium 1 Pc

●057,3085,600/97 GW clamp cover length 6000 mm Matt aluminium 1 Pc

●057,3085,200/88 GW clamp cover length 2000 mm Brushed steel-effect aluminium 1 Pc

●057,3085,300/88 GW clamp cover length 3000 mm Brushed steel-effect aluminium 1 Pc

●057,3085,400/88 GW clamp cover length 4000 mm Brushed steel-effect aluminium 1 Pc

●057,3085,600/88 GW clamp cover length 6000 mm Brushed steel-effect aluminium 1 Pc

LMU20,150/97 “U” profile length 1498 mm Matt aluminium 1 Pc

●LMU20,300/97 “U” profile length 3000 mm Matt aluminium 1 Pc

LMU20,150/88 “U” profile length 1498 mm Brushed steel-effect aluminium 1 Pc

●LMU20,300/88 “U” profile length 3000 mm Brushed steel-effect aluminium 1 Pc

LMU20TP/97 “U” profile caps 20 x 16 x 1 mm Matt aluminium 1 Pc

LMU20TP/88 “U” profile caps 20 x 16 x 1 mm Brushed steel-effect aluminium 1 Pc

●PBD3185/97 Side compensation profile for fixed glass L. 3000 mm 15 x 16 mm Matt aluminium 1 Pc

●PBD3185/88 Side compensation profile for fixed glass L. 3000 mm 15 x 16 mm Brushed steel-effect aluminium 1 Pc

GTUP2 Glass holder profile - Thickness: 2mm Transparent Per m

GTUP2300 Glass holder profile pack 300 m Transparent 1 Set

GTUP3 Glass holder profile - Thickness: 3mm Transparent Per m

GTUP3250 Glass holder profile pack 250 m Transparent 1 Set

GTUP4 Glass holder profile - Thickness: 4mm Transparent Per m

GTUP4160 Glass holder profile pack 160 m Transparent 1 Set

GTUP2G Glass holder profile - Thickness: 2mm Embossed Per m

GTUP2300G Glass holder profile pack 300 m Embossed 1 Set

GTUP3G Glass holder profile - Thickness: 3mm Embossed Per m

GTUP3250G Glass holder profile pack 250 m Embossed 1 Set

GTUP4G Glass holder profile - Thickness: 4mm Embossed Per m

GTUP4160G Glass holder profile pack 160 m Embossed 1 Set

057,3078,002 Finish gasket to be inserted into the cover Black Per m

LMGF/97 LMGF floor guide Matt aluminium 1 Pc

LMGF/88 LMGF floor guide Brushed steel-effect aluminium 1 Pc

Art. Description Finish Q.ty EURO15,38

20,72

26,07

31,41

32,06

15,71

21,39

27,07

32,75

34,07

23,55

30,31

37,07

40,54

24,39

31,56

38,74

43,05

28,18

40,40

29,98

43,99

4,38

4,45

34,01

36,88

0,86

256,61

0,97

242,35

1,20

191,60

1,25

376,35

1,43

356,40

1,60

255,46

9,49

20,53

20,53

042,3102,071 Dämpfung- damper 60/100 kg White 1 Pc

042,3102,072 Dämpfung- damper 20/60 kg White 1 Pc

Mod. LMGWF CEILING FITTING PLUS FIXED -Door kit

LMGWF200/97 Complete kit - opening width W.max 950 mm ceiling mount plus fixed Matt aluminium 1 Set

LMGWF200/88 Complete kit - opening width W.max 950 mm ceiling mount plus fixed Brushed steel-effect aluminium 1 Set

LMGWF300/97 Complete kit - opening width W.max 1450 mm ceiling mount plus fixed Matt aluminium 1 Set

LMGWF300/88 Complete kit - opening width W.max 1450 mm ceiling mount plus fixed Brushed steel-effect aluminium 1 Set

LMGWF400/97 Compl. kit-opening width W.max1950 mm ceiling mount plus fixed double door Matt aluminium 1 Set

LMGWF400/88 Compl. kit-opening width W.max1950 mm ceiling mount plus fixed double door Brushed steel-effect aluminium 1 Set

Mod. LMGWI SINCRO

LMSINCRO Synchronising mechanism set for 2 LMGWF doors 1 Set

Mod. LM750 WALL MOUNT WITH HIGH COVER - WITHOUT GLASS CUT-OUT

LM705/97 Set LM705 accessories for glass pane Max 100 kg thickness 8/12 mm Matt aluminium 1 Set

LM705/91 Set LM705 accessories for glass pane Max 100 kg thickness 8/12 mm Polished aluminium 1 Set

LM705/88 Set LM705 accessories for glass pane Max 100 kg thickness 8/12 mm Brushed steel-effect aluminium 1 Set

LM3110,200/97 LM 31 aluminium track length 2000 mm Matt aluminium 1 Pc

LM3110,300/97 LM 31 aluminium track length 3000 mm Matt aluminium 1 Pc

LM3110,400/97 LM 31 aluminium track length 4000 mm Matt aluminium 1 Pc

LM3110,600/97 LM 31 aluminium track length 6000 mm Matt aluminium 1 Pc

LM3110,200/91 LM 31 aluminium track length 2000 mm Polished aluminium 1 Pc

LM3110,300/91 LM 31 aluminium track length 3000 mm Polished aluminium 1 Pc

LM3110,400/91 LM 31 aluminium track length 4000 mm Polished aluminium 1 Pc

LM3110,200/88 LM 31 aluminium track length 2000 mm Brushed steel-effect aluminium 1 Pc

LM3110,300/88 LM 31 aluminium track length 3000 mm Brushed steel-effect aluminium 1 Pc

LM3110,400/88 LM 31 aluminium track length 4000 mm Brushed steel-effect aluminium 1 Pc

LM3110,600/88 LM 31 aluminium track length 6000 mm Brushed steel-effect aluminium 1 Pc

●LM710,200/97 LM 710 high aluminium cover length 2000 mm Matt aluminium 1 Pc

●LM710,300/97 LM 710 high aluminium cover length 3000 mm Matt aluminium 1 Pc

●LM710,400/97 LM 710 high aluminium cover length 4000 mm Matt aluminium 1 Pc

●LM710,600/97 LM 710 high aluminium cover length 6000 mm Matt aluminium 1 Pc

●LM710,200/91 LM 710 high aluminium cover length 2000 mm Polished aluminium 1 Pc

●LM710,300/91 LM 710 high aluminium cover length 3000 mm Polished aluminium 1 Pc

●LM710,400/91 LM 710 high aluminium cover length 4000 mm Polished aluminium 1 Pc

ALUMINIUM SYSTEMS FOR SLIDING DOORS

Page 82

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 418/424 >>>

LARGHEZZA MAX VANO 998mm

LMGWFi200

LARGHEZZA MAX VANO 1498mm

LMGWFi300

LARGHEZZA MAX VANO 1992mm

LMGWFi400

141,32

141,32

708,02

728,64

841,77

873,73

1.374,45

1.416,02

225,81

195,10

195,10

195,10

111,34

160,72

210,11

296,30

119,89

179,36

243,47

118,09

170,84

223,60

316,54

44,49

60,74

77,00

97,54

61,19

82,81

102,62

ALUMINIUM SYSTEMS FOR SLIDING DOORS

Page 83

●LM710,200/88 LM 710 high aluminium cover length 2000 mm Brushed steel-effect aluminium 1 Pc

●LM710,300/88 LM 710 high aluminium cover length 3000 mm Brushed steel-effect aluminium 1 Pc

●LM710,400/88 LM 710 high aluminium cover length 4000 mm Brushed steel-effect aluminium 1 Pc

●LM710,600/88 LM 710 high aluminium cover length 6000 mm Brushed steel-effect aluminium 1 Pc

LM3195/97 High aluminium caps 94 x 42 x 1.5 mm Matt aluminium 1 Pair

LM3195/91 High aluminium caps 94 x 42 x 1.5 mm Polished aluminium 1 Pair

LM3195/88 High aluminium caps 94 x 42 x 1.5 mm Brushed steel-effect aluminium 1 Pair

LMGF/97 LMGF floor guide Matt aluminium 1 Pc

LMGF/91 LMGF floor guide Polished aluminium 1 Pc

LMGF/88 LMGF floor guide Brushed steel-effect aluminium 1 Pc

042,3102,071 Dämpfung- damper 60/100 kg White 1 Pc

042,3102,072 Dämpfung- damper 20/60 kg White 1 Pc

Mod. LM750 WALL MOUNT WITH HIGH COVER - WITHOUT GLASS CUT-OUT - door kit

LM750200B/97 Complete kit - opening width W.max 955 mm wall mount Matt aluminium 1 Set

LM750200B/91 Complete kit - opening width W.max 955 mm wall mount Polished aluminium 1 Set

LM750200B/88 Complete kit - opening width W.max 955 mm wall mount Brushed steel-effect aluminium 1 Set

LM750300B/97 Complete kit - opening width W.max 1455 mm wall mount Matt aluminium 1 Set

LM750300B/91 Complete kit - opening width W.max 1455 mm wall mount Polished aluminium 1 Set

LM750300B/88 Complete kit - opening width W.max 1455 mm wall mount Brushed steel-effect aluminium 1 Set

LM750400B/97 Compl. kit-opening width W.max 1950mm wall mount for double door Matt aluminium 1 Set

LM750400B/91 Compl. kit-opening width W.max 1950mm wall mount for double door Polished aluminium 1 Set

LM750400B/88 Compl. kit-opening width W. max 1950mm wall mount for double door Brushed steel-effect aluminium 1 Set

Mod. LM770 CEILING MOUNT WITH HIGH COVER - WITHOUT GLASS CUT-OUT

LM705/97 Set LM705 accessories for glass pane Max 100 kg thickness 8/12 mm Matt aluminium 1 Set

LM705/91 Set LM705 accessories for glass pane Max 100 kg thickness 8/12 mm Polished aluminium 1 Set

LM705/88 Set LM705 accessories for glass pane Max 100 kg thickness 8/12 mm Brushed steel-effect aluminium 1 Set

LM21.200/97 LM21 Single ceiling track Length 2000 mm Matt aluminium 1 Pc

LM21.300/97 LM21 Single ceiling track Length 3000 mm Matt aluminium 1 Pc

LM21.400/97 LM21 Single ceiling track Length 4000 mm Matt aluminium 1 Pc

LM21.600/97 LM21 Single ceiling track Length 6000 mm Matt aluminium 1 Pc

LM21.200/91 LM21 Single ceiling track Length 2000 mm Polished aluminium 1 Pc

LM21.300/91 LM21 Single ceiling track Length 3000 mm Polished aluminium 1 Pc

LM21.400/91 LM21 Single ceiling track Length 4000 mm Polished aluminium 1 Pc

LM21.200/88 LM21 Single ceiling track Length 2000 mm Brushed steel-effect aluminium 1 Pc

LM21.300/88 LM21 Single ceiling track Length 3000 mm Brushed steel-effect aluminium 1 Pc

LM21.400/88 LM21 Single ceiling track Length 4000 mm Brushed steel-effect aluminium 1 Pc

LM21.600/88 LM21 Single ceiling track Length 6000 mm Brushed steel-effect aluminium 1 Pc

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 424/428 >>>

LARGHEZZA MAX VANO 950mm

mod. LM312000

S=20

LARGHEZZA MAX VANO 1450mm

mod. LM313000

S=20

LARGHEZZA MAX VANO 1955mm

mod. LM314000

47,62

65,44

83,27

106,94

23,44

23,44

23,44

20,53

20,53

20,53

141,32

141,32

380,98

406,24

390,86

448,81

489,52

463,63

713,20

772,19

732,97

195,10

195,10

195,10

78,90

111,80

144,71

197,46

84,82

120,70

156,57

83,62

118,90

154,17

211,64

●LM710,200/97 LM 710 high aluminium cover length 2000 mm Matt aluminium 1 Pc

●LM710,300/97 LM 710 high aluminium cover length 3000 mm Matt aluminium 1 Pc

●LM710,400/97 LM 710 high aluminium cover length 4000 mm Matt aluminium 1 Pc

●LM710,600/97 LM 710 high aluminium cover length 6000 mm Matt aluminium 1 Pc

●LM710,200/91 LM 710 high aluminium cover length 2000 mm Polished aluminium 1 Pc

●LM710,300/91 LM 710 high aluminium cover length 3000 mm Polished aluminium 1 Pc

●LM710,400/91 LM 710 high aluminium cover length 4000 mm Polished aluminium 1 Pc

●LM710,200/88 LM 710 high aluminium cover length 2000 mm Brushed steel-effect aluminium 1 Pc

●LM710,300/88 LM 710 high aluminium cover length 3000 mm Brushed steel-effect aluminium 1 Pc

●LM710,400/88 LM 710 high aluminium cover length 4000 mm Brushed steel-effect aluminium 1 Pc

●LM710,600/88 LM 710 high aluminium cover length 6000 mm Brushed steel-effect aluminium 1 Pc

LM3198/97 High aluminium caps 94 x 45 x 1.5 mm Matt aluminium 1 Pair

LM3198/91 High aluminium caps 94 x 45 x 1.5 mm Polished aluminium 1 Pair

LM3198/88 High aluminium caps 94 x 45 x 1.5 mm Brushed steel-effect aluminium 1 Pair

LM3199/97 High aluminium caps flush with wall 94 x 40 x 1.5 mm Matt aluminium 1 Pair

LM3199/91 High aluminium caps flush with wall 94 x 40 x 1.5 mm Polished aluminium 1 Pair

LM3199/88 High aluminium caps flush with wall 94 x 40 x 1.5 mm Brushed steel-effect aluminium 1 Pair

LMGF/97 LMGF floor guide Matt aluminium 1 Pc

LMGF/91 LMGF floor guide Polished aluminium 1 Pc

LMGF/88 LMGF floor guide Brushed steel-effect aluminium 1 Pc

042,3102,071 Dämpfung- damper 60/100 kg White 1 Pc

042,3102,072 Dämpfung- damper 20/60 kg White 1 Pc

Mod. LM770 CEILING MOUNT WITH HIGH COVER - WITHOUT GLASS CUT-OUT - door kit

LM770200B/97 Complete kit - opening width W.max 955 mm ceiling mount Matt aluminium 1 Set

LM770200B/91 Complete kit - opening width W.max 955 mm ceiling mount Polished aluminium 1 Set

LM770200B/88 Complete kit - opening width W.max 955 mm ceiling mount Brushed steel-effect aluminium 1 Set

LM770300B/97 Complete kit - opening width W.max 1455 mm ceiling mount Matt aluminium 1 Set

LM770300B/91 Complete kit - opening width W.max 1455 mm ceiling mount Polished aluminium 1 Set

LM770300B/88 Complete kit - opening width W.max 1455 mm ceiling mount Brushed steel-effect aluminium 1 Set

LM770400B/97 Complete kit - opening width W. max 1950 mm Matt aluminium 1 Set

ceiling mount for double door

LM770400B/91 Complete kit - opening width W. max 1950 mm Polished aluminium 1 Set

ceiling mount for double door

LM770400B/88 Complete kit - opening width W. max 1950 mm Brushed steel-effect aluminium 1 Set

ceiling mount for double door

ALUMINIUM SYSTEMS FOR SLIDING DOORS

Page 84

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 429/431 >>>

LARGHEZZA MAX VANO 950mm

mod. LM312000

S=20

LARGHEZZA MAX VANO 1450mm

mod. LM313000

S=20

LARGHEZZA MAX VANO 1955mm

mod. LM314000

44,49

60,74

77,00

97,54

61,19

82,81

102,62

47,62

65,44

83,27

106,94

24,57

24,57

24,57

23,44

23,44

23,44

20,53

20,53

20,53

141,32

141,32

394,16

433,49

405,15

461,77

514,79

478,26

725,94

789,05

747,93

ALUMINIUM SYSTEMS FOR SLIDING DOORS

Page 85 >>> CATALOGUE REFERENCE PAGE 433/435 >>>

Mod. LM777 CEILING MOUNT WITH FIXED GLASS - WITHOUT GLASS CUT-OUT

LM705/97 Set LM705 accessories for glass pane Max 100 kg thick. 8/12 mm Matt aluminium 1 Set

LM705/91 Set LM705 accessories for glass pane Max 100 kg thick. 8/12 mm Polished aluminium 1 Set

LM705/88 Set LM705 accessories for glass pane Max 100 kg thick. 8/12 mm Brushed steel-effect aluminium 1 Set

LM21.200/97 LM21 Single ceiling track Length 2000 mm Matt aluminium 1 Pc

LM21.300/97 LM21 Single ceiling track Length 3000 mm Matt aluminium 1 Pc

LM21.400/97 LM21 Single ceiling track Length 4000 mm Matt aluminium 1 Pc

LM21.600/97 LM21 Single ceiling track Length 6000 mm Matt aluminium 1 Pc

LM21.200/91 LM21 Single ceiling track Length 2000 mm Polished aluminium 1 Pc

LM21.300/91 LM21 Single ceiling track Length 3000 mm Polished aluminium 1 Pc

LM21.400/91 LM21 Single ceiling track Length 4000 mm Polished aluminium 1 Pc

LM21.200/88 LM21 Single ceiling track Length 2000 mm Brushed steel-effect aluminium 1 Pc

LM21.300/88 LM21 Single ceiling track Length 3000 mm Brushed steel-effect aluminium 1 Pc

LM21.400/88 LM21 Single ceiling track Length 4000 mm Brushed steel-effect aluminium 1 Pc

LM21.600/88 LM21 Single ceiling track Length 6000 mm Brushed steel-effect aluminium 1 Pc

LM747,200/97 LM747 pre-drilled fixed aluminium profile length 2000 mm Matt aluminium 1 Pc

LM747,300/97 LM747 pre-drilled fixed aluminium profile length 3000 mm Matt aluminium 1 Pc

LM747,400/97 LM747 pre-drilled fixed aluminium profile length 4000 mm Matt aluminium 1 Pc

LM747,600/97 LM747 pre-drilled fixed aluminium profile length 6000 mm Matt aluminium 1 Pc

LM747,200/91 LM747 pre-drilled fixed aluminium profile length 2000 mm Polished aluminium 1 Pc

LM747,300/91 LM747 pre-drilled fixed aluminium profile length 3000 mm Polished aluminium 1 Pc

LM747,400/91 LM747 pre-drilled fixed aluminium profile length 4000 mm Polished aluminium 1 Pc

LM747,200/88 LM747 pre-drilled fixed aluminium profile length 2000 mm Brushed steel-effect aluminium 1 Pc

LM747,300/88 LM747 pre-drilled fixed aluminium profile length 3000 mm Brushed steel-effect aluminium 1 Pc

LM747,400/88 LM747 pre-drilled fixed aluminium profile length 4000 mm Brushed steel-effect aluminium 1 Pc

LM747,600/88 LM747 pre-drilled fixed aluminium profile length 6000 mm Brushed steel-effect aluminium 1 Pc

LMU20,150/97 “U” profile length 1498 mm Matt aluminium 1 Pc

●LMU20,300/97 “U” profile length 3000 mm Matt aluminium 1 Pc

LMU20,150/91 “U” profile length 1498 mm Polished aluminium 1 Pc

●LMU20,300/91 “U” profile length 3000 mm Polished aluminium 1 Pc

LMU20,150/88 “U” profile length 1498 mm Brushed steel-effect aluminium 1 Pc

●LMU20,300/88 “U” profile length 3000 mm Brushed steel-effect aluminium 1 Pc

LMU20TP/97 “U” profile caps 20 x 16 x 1 mm Matt aluminium 1 Pc

LMU20TP/91 “U” profile caps 20 x 16 x 1 mm Polished aluminium 1 Pc

LMU20TP/88 “U” profile caps 20 x 16 x 1 mm Brushed steel-effect aluminium 1 Pc

●PBD3185/97 Side compensation profile for fixed glass L. 3000 mm 15 x 16 mm Matt aluminium 1 Pc

●PBD3185/91 Side compensation profile for fixed glass L. 3000 mm 15 x 16 mm Polished aluminium 1 Pc

●PBD3185/88 Side compensation profile for fixed glass L. 3000 mm 15 x 16 mm Brushed steel-effect aluminium 1 Pc

GTUP2 Glass holder profile - Thickness: 2mm Transparent Per m

GTUP2300 Glass holder profile pack 300 m Transparent 1 Set

GTUP2G Glass holder profile - Thickness: 2mm Embossed Per m

GTUP2300G Glass holder profile pack 300 m Embossed 1 Set

PBD3184,100/97 Upper bevelled profile Length 992 mm Matt aluminium 1 Pc

PBD3184,150/97 Upper bevelled profile Length 1498 mm Matt aluminium 1 Pc

●PBD3184/97 Upper bevelled profile Length 3000 mm Matt aluminium 1 Pc

PBD3184,100/91 Upper bevelled profile Length 992 mm Polished aluminium 1 Pc

Art. Description Finish Q.ty EURO

195,10

195,10

195,10

78,90

111,80

144,71

197,46

84,82

120,70

156,57

83,62

118,90

154,17

211,64

118,25

171,15

224,05

317,39

123,15

175,38

225,75

131,72

191,35

250,99

357,80

28,18

40,40

31,33

46,70

29,98

43,99

4,38

4,45

4,45

34,01

40,87

36,88

0,86

256,61

1,25

376,35

14,45

17,68

19,40

17,75

PBD3184,150/91 Upper bevelled profile Length 1498 mm Polished aluminium 1 Pc

●PBD3184/91 Upper bevelled profile Length 3000 mm Polished aluminium 1 Pc

PBD3184,100/88 Upper bevelled profile Length 992 mm Brushed steel-effect aluminium 1 Pc

PBD3184,150/88 Upper bevelled profile Length 1498 mm Brushed steel-effect aluminium 1 Pc

●PBD3184/88 Upper bevelled profile Length 3000 mm Brushed steel-effect aluminium 1 Pc

●LM710,200/97 LM 710 high aluminium cover length 2000 mm Matt aluminium 1 Pc

●LM710,300/97 LM 710 high aluminium cover length 3000 mm Matt aluminium 1 Pc

●LM710,400/97 LM 710 high aluminium cover length 4000 mm Matt aluminium 1 Pc

●LM710,600/97 LM 710 high aluminium cover length 6000 mm Matt aluminium 1 Pc

●LM710,200/91 LM 710 high aluminium cover length 2000 mm Polished aluminium 1 Pc

●LM710,300/91 LM 710 high aluminium cover length 3000 mm Polished aluminium 1 Pc

●LM710,400/91 LM 710 high aluminium cover length 4000 mm Polished aluminium 1 Pc

●LM710,200/88 LM 710 high aluminium cover length 2000 mm Brushed steel-effect aluminium 1 Pc

●LM710,300/88 LM 710 high aluminium cover length 3000 mm Brushed steel-effect aluminium 1 Pc

●LM710,400/88 LM 710 high aluminium cover length 4000 mm Brushed steel-effect aluminium 1 Pc

●LM710,600/88 LM 710 high aluminium cover length 6000 mm Brushed steel-effect aluminium 1 Pc

LMGF/97 LMGF floor guide Matt aluminium 1 Pc

LMGF/91 LMGF floor guide Polished aluminium 1 Pc

LMGF/88 LMGF floor guide Brushed steel-effect aluminium 1 Pc

042,3102,071 Dämpfung- damper 60/100 kg White 1 Pc

042,3102,072 Dämpfung- damper 20/60 kg White 1 Pc

Mod. LM777 CEILING MOUNT WITH FIXED GLASS - WITHOUT GLASS CUT-OUT - door kit

LM777200B/97 Compl. kit - opening width W.max 975mm ceiling mount with fixed Matt aluminium 1 Set

LM777200B/91 Compl. kit - opening width W.max 975mm ceiling mount with fixed Polished aluminium 1 Set

LM777200B/88 Compl. kit - opening width W.max 975mm ceiling mount with fixed Brushed steel-effect aluminium 1 Set

LM777300B/97 Compl. kit - opening width W.max 1475mm ceiling mount with fixed Matt aluminium 1 Set

LM777300B/91 Compl. kit - opening width W.max 1475mm ceiling mount with fixed Polished aluminium 1 Set

LM777300B/88 Compl. kit - opening width W.max 1475mm ceiling mount with fixed Brushed steel-effect aluminium 1 Set

LM777400B/97 Complete kit - opening width W.max 1950 mm Matt aluminium 1 Set

ceiling mount for double door with fixed

LM777400B/91 Complete kit - opening width W.max 1950 mm Polished aluminium 1 Set

ceiling mount for double door with fixed

LM777400B/88 Complete kit - opening width W.max 1950 mm Brushed steel-effect aluminium 1 Set

ceiling mount for double door with fixed

ALUMINIUM SYSTEMS FOR SLIDING DOORS

Page 86

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 000 >>>

LARGHEZZA MAX VANO 950mm

mod. LM312000

LARGHEZZA MAX VANO 1450mm

mod. LM313000

LARGHEZZA MAX VANO 1955mm

mod. LM314000

>>> CATALOGUE REFERENCE PAGE 435/437 >>>

22,63

29,30

14,96

18,44

20,92

44,49

60,74

77,00

97,54

61,19

82,81

102,62

47,62

65,44

83,27

106,94

20,53

20,53

20,53

141,32

141,32

497,35

533,06

521,32

615,08

661,60

651,50

923,24

978,78

971,16

ALUMINIUM SYSTEMS FOR SLIDING DOORS

Page 87 >>> CATALOGUE REFERENCE PAGE 439/442 >>>

Mod. LM31 WALL MLOUNT WITH VISIBLE CLAMPS

LM3100/97 LM31 acc. set for glass pane Max 100 kg thickness 6/10 mm Matt aluminium 1 Set

LM3100/91 LM31 acc. set for glass pane Max 100 kg thickness 6/10 mm Polished aluminium 1 Set

LM3100/88 LM31 acc. set for glass pane Max 100 kg thickness 6/10 mm Brushed steel-effect aluminium 1 Set

LM3110,200/97 LM 31 aluminium track length 2000 mm Matt aluminium 1 Pc

LM3110,300/97 LM 31 aluminium track length 3000 mm Matt aluminium 1 Pc

LM3110,400/97 LM 31 aluminium track length 4000 mm Matt aluminium 1 Pc

LM3110,600/97 LM 31 aluminium track length 6000 mm Matt aluminium 1 Pc

LM3110,200/91 LM 31 aluminium track length 2000 mm Polished aluminium 1 Pc

LM3110,300/91 LM 31 aluminium track length 3000 mm Polished aluminium 1 Pc

LM3110,400/91 LM 31 aluminium track length 4000 mm Polished aluminium 1 Pc

LM3110,200/88 LM 31 aluminium track length 2000 mm Brushed steel-effect aluminium 1 Pc

LM3110,300/88 LM 31 aluminium track length 3000 mm Brushed steel-effect aluminium 1 Pc

LM3110,400/88 LM 31 aluminium track length 4000 mm Brushed steel-effect aluminium 1 Pc

LM3110,600/88 LM 31 aluminium track length 6000 mm Brushed steel-effect aluminium 1 Pc

●LM3120,200/97 LM 31 low aluminium cover length 2000 mm Matt aluminium 1 Pc

●LM3120,300/97 LM 31 low aluminium cover length 3000 mm Matt aluminium 1 Pc

●LM3120,400/97 LM 31 low aluminium cover length 4000 mm Matt aluminium 1 Pc

●LM3120,600/97 LM 31 low aluminium cover length 6000 mm Matt aluminium 1 Pc

●LM3120,200/91 LM 31 low aluminium cover length 2000 mm Polished aluminium 1 Pc

●LM3120,300/91 LM 31 low aluminium cover length 3000 mm Polished aluminium 1 Pc

●LM3120,400/91 LM 31 low aluminium cover length 4000 mm Polished aluminium 1 Pc

●LM3120,200/88 LM 31 low aluminium cover length 2000 mm Brushed steel-effect aluminium 1 Pc

●LM3120,300/88 LM 31 low aluminium cover length 3000 mm Brushed steel-effect aluminium 1 Pc

●LM3120,400/88 LM 31 low aluminium cover length 4000 mm Brushed steel-effect aluminium 1 Pc

●LM3120,600/88 LM 31 low aluminium cover length 6000 mm Brushed steel-effect aluminium 1 Pc

LM3140/97 LM 313 low caps 31 x 43 x 1.5 mm Matt aluminium 1 Pair

LM3140/91 LM 313 low caps 31 x 43 x 1.5 mm Polished aluminium 1 Pair

LM3140/88 LM 313 low caps 31 x 43 x 1.5 mm Brushed steel-effect aluminium 1 Pair

LMGF/97 LMGF floor guide Matt aluminium 1 Pc

LMGF/91 LMGF floor guide Polished aluminium 1 Pc

LMGF/88 LMGF floor guide Brushed steel-effect aluminium 1 Pc

042,3102,071 Dämpfung- damper 60/100 kg White 1 Pc

042,3102,072 Dämpfung- damper 20/60 kg White 1 Pc

Mod. LM31 WALL MOUNT WITH VISIBLE CLAMPS - Door kit

LM31200B/97 Complete kit - opening width W.max 955 mm wall mount Matt aluminium 1 Set

LM31200B/91 Complete kit - opening width W.max 955 mm wall mount Polished aluminium 1 Set

LM31200B/88 Complete kit - opening width W.max 955 mm wall mount Brushed steel-effect aluminium 1 Set

LM31300B/97 Complete kit - opening width W.max 1455 mm wall mount Matt aluminium 1 Set

LM31300B/91 Complete kit - opening width W.max 1455 mm wall mount Polished aluminium 1 Set

LM31300B/88 Complete kit - opening width W.max 1455 mm wall mount Brushed steel-effect aluminium 1 Set

Art. Description Finish Q.ty EURO

LARGHEZZA MAX VANO 950mm

mod. LM312000

S=20

LARGHEZZA MAX VANO 1450mm

mod. LM313000

S=20

154,23

206,12

184,57

111,34

160,72

210,11

296,30

119,89

179,36

243,47

118,09

170,84

223,60

316,54

24,43

30,37

36,30

43,13

31,94

47,53

74,69

25,48

31,94

38,39

45,77

15,05

15,05

15,05

20,53

20,53

20,53

141,32

141,32

311,68

379,62

349,80

369,18

456,87

411,21

LM31400B/97 Complete kit - opening width W. max 1950 mm Matt aluminium 1 Set

wall mount for double door

LM31400B/91 Complete kit - opening width W. max 1950 mm Polished aluminium 1 Set

wall mount for double door

LM31400B/88 Complete kit - opening width W. max 1950 mm Brushed steel-effect aluminium 1 Set

wall mount for double door

Mod. LM313 WALL MOUNT WITH HIGH COVER

LM3100/97 31 accessories set for glass pane Max 100 kg thick. 6/10 mm Matt aluminium 1 Set

LM3100/91 31 accessories set for glass pane Max 100 kg thick. 6/10 mm Polished aluminium 1 Set

LM3100/88 31 accessories set for glass pane Max 100 kg thick. 6/10 mm Brushed steel-effect aluminium 1 Set

LM3110,200/97 LM 31 aluminium track length 2000 mm Matt aluminium 1 Pc

LM3110,300/97 LM 31 aluminium track length 3000 mm Matt aluminium 1 Pc

LM3110,400/97 LM 31 aluminium track length 4000 mm Matt aluminium 1 Pc

LM3110,600/97 LM 31 aluminium track length 6000 mm Matt aluminium 1 Pc

LM3110,200/91 LM 31 aluminium track length 2000 mm Polished aluminium 1 Pc

LM3110,300/91 LM 31 aluminium track length 3000 mm Polished aluminium 1 Pc

LM3110,400/91 LM 31 aluminium track length 4000 mm Polished aluminium 1 Pc

LM3110,200/88 LM 31 aluminium track length 2000 mm Brushed steel-effect aluminium 1 Pc

LM3110,300/88 LM 31 aluminium track length 3000 mm Brushed steel-effect aluminium 1 Pc

LM3110,400/88 LM 31 aluminium track length 4000 mm Brushed steel-effect aluminium 1 Pc

LM3110,600/88 LM 31 aluminium track length 6000 mm Brushed steel-effect aluminium 1 Pc

●LM3130,200/97 LM 313 high aluminium cover length 2000 mm Matt aluminium 1 Pc

●LM3130,300/97 LM 313 high aluminium cover length 3000 mm Matt aluminium 1 Pc

●LM3130,400/97 LM 313 high aluminium cover length 4000 mm Matt aluminium 1 Pc

●LM3130,600/97 LM 313 high aluminium cover length 6000 mm Matt aluminium 1 Pc

●LM3130,200/91 LM 313 high aluminium cover length 2000 mm Polished aluminium 1 Pc

●LM3130,300/91 LM 313 high aluminium cover length 3000 mm Polished aluminium 1 Pc

●LM3130,400/91 LM 313 high aluminium cover length 4000 mm Polished aluminium 1 Pc

●LM3130,200/88 LM 313 high aluminium cover length 2000 mm Brushed steel-effect aluminium 1 Pc

●LM3130,300/88 LM 313 high aluminium cover length 3000 mm Brushed steel-effect aluminium 1 Pc

●LM3130,400/88 LM 313 high aluminium cover length 4000 mm Brushed steel-effect aluminium 1 Pc

●LM3130,600/88 LM 313 high aluminium cover length 6000 mm Brushed steel-effect aluminium 1 Pc

LM3150/97 LM 313 high caps 74 x 43 x 1.5 mm Matt aluminium 1 Pair

LM3150/88 LM 313 high caps 74 x 43 x 1.5 mm Brushed steel-effect aluminium 1 Pair

LM3150/91 LM 313 high caps 74 x 43 x 1.5 mm Polished aluminium 1 Pair

LMGF/97 LMGF floor guide Matt aluminium 1 Pc

LMGF/91 LMGF floor guide Polished aluminium 1 Pc

LMGF/88 LMGF floor guide Brushed steel-effect aluminium 1 Pc

042,3102,071 Dämpfung- damper 60/100 kg White 1 Pc

042,3102,072 Dämpfung- damper 20/60 kg White 1 Pc

ALUMINIUM SYSTEMS FOR SLIDING DOORS

Page 88

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 442/445 >>>

LARGHEZZA MAX VANO 1955mm

mod. LM314000

582,38

757,90

658,63

154,23

206,12

184,57

111,34

160,72

210,11

296,30

119,89

179,36

243,47

118,09

170,84

223,60

316,54

38,77

51,87

64,96

78,59

50,92

75,63

112,16

41,28

55,64

69,99

86,13

21,67

21,67

21,67

20,53

20,53

20,53

141,32

141,32

ALUMINIUM SYSTEMS FOR SLIDING DOORS

Page 89 >>> CATALOGUE REFERENCE PAGE 447/450 >>>

Mod. LM313 WALL MOUNT WITH HIGH COVER - Door kit

LM313200B/97 Complete kit - opening width W.max 955 mm wall mount high cover Matt aluminium 1 Set

LM313200B/91 Complete kit - opening width W.max 955 mm wall mount high cover Polished aluminium 1 Set

LM313200B/88 Complete kit - opening width W.max 955 mm wall mount high cover Brushed steel-effect aluminium 1 Set

LM313300B/97 Complete kit - opening width W.max 1455 mm wall mount high cover Matt aluminium 1 Set

LM313300B/91 Complete kit - opening width W.max 1455 mm wall mount high cover Polished aluminium 1 Set

LM313300B/88 Complete kit - opening width W.max 1455 mm wall mount high cover Brushed steel-effect aluminium 1 Set

LM313400B/97 Complete kit - opening width W.max 1950 mm Matt aluminium 1 Set

wall mount double door high cover

LM313400B/91 Complete kit - opening width W.max 1950 mm Polished aluminium 1 Set

wall mount double door high cover

LM313400B/88 Complete kit - opening width W.max 1950 mm Brushed steel-effect aluminium 1 Set

wall mount double door high cover

Mod. LM3F WALL WITH FIXED GLASS

LM3100/97 31 accessories set for glass pane Max 100 kg thickness 6/10 mm Matt aluminium 1 Set

LM3100/91 31 accessories set for glass pane Max 100 kg thickness 6/10 mm Polished aluminium 1 Set

LM3100/88 31 accessories set for glass pane Max 100 kg thickness 6/10 mm Brushed steel-effect aluminium 1 Set

LM3110,200/97 LM 31 aluminium track length 2000 mm Matt aluminium 1 Pc

LM3110,300/97 LM 31 aluminium track length 3000 mm Matt aluminium 1 Pc

LM3110,400/97 LM 31 aluminium track length 4000 mm Matt aluminium 1 Pc

LM3110,600/97 LM 31 aluminium track length 6000 mm Matt aluminium 1 Pc

LM3110,200/91 LM 31 aluminium track length 2000 mm Polished aluminium 1 Pc

LM3110,300/91 LM 31 aluminium track length 3000 mm Polished aluminium 1 Pc

LM3110,400/91 LM 31 aluminium track length 4000 mm Polished aluminium 1 Pc

LM3110,200/88 LM 31 aluminium track length 2000 mm Brushed steel-effect aluminium 1 Pc

LM3110,300/88 LM 31 aluminium track length 3000 mm Brushed steel-effect aluminium 1 Pc

LM3110,400/88 LM 31 aluminium track length 4000 mm Brushed steel-effect aluminium 1 Pc

LM3110,600/88 LM 31 aluminium track length 6000 mm Brushed steel-effect aluminium 1 Pc

LM41,200/97 LM41 Fixed profile length 2000 mm Matt aluminium 1 Pc

LM41,300/97 LM41 Fixed profile length 3000 mm Matt aluminium 1 Pc

LM41,400/97 LM41 Fixed profile length 4000 mm Matt aluminium 1 Pc

LM41,600/97 LM41 Fixed profile length 6000 mm Matt aluminium 1 Pc

LM41,200/91 LM41 Fixed profile length 2000 mm Polished aluminium 1 Pc

LM41,300/91 LM41 Fixed profile length 3000 mm Polished aluminium 1 Pc

LM41,400/91 LM41 Fixed profile length 4000 mm Polished aluminium 1 Pc

LM41,200/88 LM41 Fixed profile length 2000 mm Brushed steel-effect aluminium 1 Pc

LM41,300/88 LM41 Fixed profile length 3000 mm Brushed steel-effect aluminium 1 Pc

LM41,400/88 LM41 Fixed profile length 4000 mm Brushed steel-effect aluminium 1 Pc

LM41,600/88 LM41 Fixed profile length 6000 mm Brushed steel-effect aluminium 1 Pc

LMU20,150/97 “U” profile length 1498 mm Matt aluminium 1 Pc

●LMU20,300/97 “U” profile length 3000 mm Matt aluminium 1 Pc

LMU20,150/91 “U” profile length 1498 mm Polished aluminium 1 Pc

●LMU20,300/91 “U” profile length 3000 mm Polished aluminium 1 Pc

LMU20,150/88 “U” profile length 1498 mm Brushed steel-effect aluminium 1 Pc

●LMU20,300/88 “U” profile length 3000 mm Brushed steel-effect aluminium 1 Pc

Art. Description Finish Q.ty EURO

LARGHEZZA MAX VANO 950mm

mod. LM312000

S=20

LARGHEZZA MAX VANO 1450mm

mod. LM313000

S=20

LARGHEZZA MAX VANO 1955mm

mod. LM314000

332,63

405,22

372,22

397,30

491,59

441,52

617,66

801,99

696,85

154,23

206,12

184,57

111,34

160,72

210,11

296,30

119,89

179,36

243,47

118,09

170,84

223,60

316,54

98,19

133,47

173,26

238,77

117,40

169,06

220,72

105,92

151,84

197,77

275,52

28,18

40,40

31,33

46,70

29,98

43,99

LMU20TP/97 “U” profile caps 20 x 16 x 1 mm Matt aluminium 1 Pc

LMU20TP/91 “U” profile caps 20 x 16 x 1 mm Polished aluminium 1 Pc

LMU20TP/88 “U” profile caps 20 x 16 x 1 mm Brushed steel-effect aluminium 1 Pc

GTUP2 Glass holder profile - Thickness: 2mm Transparent Per m

GTUP2300 Glass holder profile pack 300 m Transparent 1 Set

GTUP2G Glass holder profile - Thickness: 2mm Embossed Per m

GTUP2300G Glass holder profile pack 300 m Embossed 1 Set

PBD3184,100/97 Upper bevelled profile Length 992 mm Matt aluminium 1 Pc

PBD3184,150/97 Upper bevelled profile Length 1498 mm Matt aluminium 1 Pc

●PBD3184/97 Upper bevelled profile Length 3000 mm Matt aluminium 1 Pc

PBD3184,100/91 Upper bevelled profile Length 992 mm Polished aluminium 1 Pc

PBD3184,150/91 Upper bevelled profile Length 1498 mm Polished aluminium 1 Pc

●PBD3184/91 Upper bevelled profile Length 3000 mm Polished aluminium 1 Pc

PBD3184,100/88 Upper bevelled profile Length 992 mm Brushed steel-effect aluminium 1 Pc

PBD3184,150/88 Upper bevelled profile Length 1498 mm Brushed steel-effect aluminium 1 Pc

●PBD3184/88 Upper bevelled profile Length 3000 mm Brushed steel-effect aluminium 1 Pc

●LM3130,200/97 LM 313 high aluminium cover length 2000 mm Matt aluminium 1 Pc

●LM3130,300/97 LM 313 high aluminium cover length 3000 mm Matt aluminium 1 Pc

●LM3130,400/97 LM 313 high aluminium cover length 4000 mm Matt aluminium 1 Pc

●LM3130,600/97 LM 313 high aluminium cover length 6000 mm Matt aluminium 1 Pc

●LM3130,200/91 LM 313 high aluminium cover length 2000 mm Polished aluminium 1 Pc

●LM3130,300/91 LM 313 high aluminium cover length 3000 mm Polished aluminium 1 Pc

●LM3130,400/91 LM 313 high aluminium cover length 4000 mm Polished aluminium 1 Pc

●LM3130,200/88 LM 313 high aluminium cover length 2000 mm Brushed steel-effect aluminium 1 Pc

●LM3130,300/88 LM 313 high aluminium cover length 3000 mm Brushed steel-effect aluminium 1 Pc

●LM3130,400/88 LM 313 high aluminium cover length 4000 mm Brushed steel-effect aluminium 1 Pc

●LM3130,600/88 LM 313 high aluminium cover length 6000 mm Brushed steel-effect aluminium 1 Pc

LM3173/97 LM 3173 high caps 74 x 60 x 1.5 mm Matt aluminium 1 Set

LM3173/91 LM 3173 high caps 74 x 60 x 1.5 mm Polished aluminium 1 Set

LM3173/88 LM 3173 high caps 74 x 60 x 1.5 mm Brushed steel-effect aluminium 1 Set

LMGF/97 LMGF floor guide Matt aluminium 1 Pc

LMGF/91 LMGF floor guide Polished aluminium 1 Pc

LMGF/88 LMGF floor guide Brushed steel-effect aluminium 1 Pc

042,3102,071 Dämpfung- damper 60/100 kg White 1 Pc

042,3102,072 Dämpfung- damper 20/60 kg White 1 Pc

Mod. LM3F WALL MOUNT WITH FIXED GLASS - Door kit

LM3F200B/97 Compl. kit-opening width W.max 955mm Wall mount high cover with fixed Matt aluminium 1 Set

LM3F200B/91 Compl. kit-opening width W.max 955mm Wall mount high cover with fixed Polished aluminium 1 Set

LM3F200B/88 Compl. kit-opening width W.max 955mm Wall mount high cover with fixed Brushed steel-effect aluminium 1 Set

LM3F300B/97 Compl. kit-opening width W.max 1455mm Wall mount high cover with fixed Matt aluminium 1 Set

LM3F300B/91 Compl. kit-opening width W.max 1455mm Wall mount high cover with fixed Polished aluminium 1 Set

LM3F300B/88 Compl. kit-opening width W.max 1455mm Wall mount high cover with fixed Brushed steel-effect aluminium 1 Set

ALUMINIUM SYSTEMS FOR SLIDING DOORS

Page 90

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 450/453 >>>

LARGHEZZA MAX VANO 950mm

mod. LM312000

S=20 S=20

LARGHEZZA MAX VANO 1450mm

mod. LM313000

S=20 S=20

4,38

4,45

4,45

0,86

256,61

1,25

376,35

14,45

17,68

19,40

17,75

22,63

29,30

14,96

18,44

20,92

38,77

51,87

64,96

78,59

50,92

75,63

112,16

41,28

55,64

69,99

86,13

22,61

22,61

22,61

20,53

20,53

20,53

141,32

141,32

488,94

588,99

538,97

601,96

743,24

669,06

ALUMINIUM SYSTEMS FOR SLIDING DOORS

Page 91 >>> CATALOGUE REFERENCE PAGE 453/456 >>>

LM3F400B/97 Complete kit - opening width W.max 1950 mm. Matt aluminium 1 Set

Wall mount high cover with fixed

LM3F400B/91 Complete kit - opening width W.max 1950 mm. Polished aluminium 1 Set

Wall mount high cover with fixed

LM3F400B/88 Complete kit - opening width W.max 1950 mm. Brushed steel-effect aluminium 1 Set

Wall mount high cover with fixed

Mod. LM21 CEILING MOUNT WITH VISIBLE CLAMPS

LM3100/97 31 accessories set for glass pane Max 100 kg thickness 6/10 mm Matt aluminium 1 Set

LM3100/91 31 accessories set for glass pane Max 100 kg thickness 6/10 mm Polished aluminium 1 Set

LM3100/88 31 accessories set for glass pane Max 100 kg thickness 6/10 mm Brushed steel-effect aluminium 1 Set

LM21.200/97 LM21 Single ceiling track Length 2000 mm Matt aluminium 1 Pc

LM21.300/97 LM21 Single ceiling track Length 3000 mm Matt aluminium 1 Pc

LM21.400/97 LM21 Single ceiling track Length 4000 mm Matt aluminium 1 Pc

LM21.600/97 LM21 Single ceiling track Length 6000 mm Matt aluminium 1 Pc

LM21.200/91 LM21 Single ceiling track Length 2000 mm Polished aluminium 1 Pc

LM21.300/91 LM21 Single ceiling track Length 3000 mm Polished aluminium 1 Pc

LM21.400/91 LM21 Single ceiling track Length 4000 mm Polished aluminium 1 Pc

LM21.200/88 LM21 Single ceiling track Length 2000 mm Brushed steel-effect aluminium 1 Pc

LM21.300/88 LM21 Single ceiling track Length 3000 mm Brushed steel-effect aluminium 1 Pc

LM21.400/88 LM21 Single ceiling track Length 4000 mm Brushed steel-effect aluminium 1 Pc

LM21.600/88 LM21 Single ceiling track Length 6000 mm Brushed steel-effect aluminium 1 Pc

●LM3120,200/97 LM 31 low aluminium cover length 2000 mm Matt aluminium 1 Pc

●LM3120,300/97 LM 31 low aluminium cover length 3000 mm Matt aluminium 1 Pc

●LM3120,400/97 LM 31 low aluminium cover length 4000 mm Matt aluminium 1 Pc

●LM3120,600/97 LM 31 low aluminium cover length 6000 mm Matt aluminium 1 Pc

●LM3120,200/91 LM 31 low aluminium cover length 2000 mm Polished aluminium 1 Pc

●LM3120,300/91 LM 31 low aluminium cover length 3000 mm Polished aluminium 1 Pc

●LM3120,400/91 LM 31 low aluminium cover length 4000 mm Polished aluminium 1 Pc

●LM3120,200/88 LM 31 low aluminium cover length 2000 mm Brushed steel-effect aluminium 1 Pc

●LM3120,300/88 LM 31 low aluminium cover length 3000 mm Brushed steel-effect aluminium 1 Pc

●LM3120,400/88 LM 31 low aluminium cover length 4000 mm Brushed steel-effect aluminium 1 Pc

●LM3120,600/88 LM 31 low aluminium cover length 6000 mm Brushed steel-effect aluminium 1 Pc

LM3170/97 LM 21 low caps 32 x 46 x 1.5 mm Matt aluminium 1 Pair

LM3170/91 LM 21 low caps 32 x 46 x 1.5 mm Polished aluminium 1 Pair

LM3170/88 LM 21 low caps 32 x 46 x 1.5 mm Brushed steel-effect aluminium 1 Pair

LM3175/97 LM 21 low caps 32 x 40 x 1.5 mm Matt aluminium 1 Pair

LM3175/91 LM 21 low caps 32 x 40 x 1.5 mm Polished aluminium 1 Pair

LM3175/88 LM 21 low caps 32 x 40 x 1.5 mm Brushed steel-effect aluminium 1 Pair

LMGF/97 LMGF floor guide Matt aluminium 1 Pc

LMGF/91 LMGF floor guide Polished aluminium 1 Pc

LMGF/88 LMGF floor guide Brushed steel-effect aluminium 1 Pc

Art. Description Finish Q.ty EURO

LARGHEZZA MAX VANO 1955mm

mod. LM314000

S=20 S=20

872,58

1.120,87

981,68

154,23

206,12

184,57

78,90

111,80

144,71

197,46

84,82

120,70

156,57

83,62

118,90

154,17

211,64

24,43

30,37

36,30

43,13

31,94

47,53

74,69

25,48

31,94

38,39

45,77

15,07

15,07

15,07

15,07

15,07

15,07

20,53

20,53

20,53

042,3102,071 Dämpfung- damper 60/100 kg White 1 Pc

042,3102,072 Dämpfung- damper 20/60 kg White 1 Pc

Mod. LM21 CEILING MOUNT WITH VISIBLE CLAMPS - Door kit

LM21200B/97 Complete kit - opening width W.max 955 mm. Ceiling mount low cover Matt aluminium 1 Set

LM21200B/91 Complete kit - opening width W.max 955 mm. Ceiling mount low cover Polished aluminium 1 Set

LM21200B/88 Complete kit - opening width W.max 955 mm. Ceiling mount low cover Brushed steel-effect aluminium 1 Set

LM21300B/97 Complete kit - opening width W.max 1455 mm. Ceiling mount low cover Matt aluminium 1 Set

LM21300B/91 Complete kit - opening width W.max 1455 mm. Ceiling mount low cover Polished aluminium 1 Set

LM21300B/88 Complete kit - opening width W.max 1455 mm. Ceiling mount low cover Brushed steel-effect aluminium 1 Set

LM21400B/97 Complete kit - opening width W.max 1950 mm. Ceiling mount low cover Matt aluminium 1 Set

LM21400B/91 Complete kit - opening width W.max 1950 mm. Ceiling mount low cover Polished aluminium 1 Set

LM21400B/88 Complete kit - opening width W.max 1950 mm. Ceiling mount low cover Brushed steel-effect aluminium 1 Set

Mod. LM213 CEILING MOUNT WITH HIGH COVER

LM3100/97 31 accessories set for glass pane Max 100 kg thickness 6/10 mm Matt aluminium 1 Set

LM3100/91 31 accessories set for glass pane Max 100 kg thickness 6/10 mm Polished aluminium 1 Set

LM3100/88 31 accessories set for glass pane Max 100 kg thickness 6/10 mm Brushed steel-effect aluminium 1 Set

LM21.200/97 LM21 Single ceiling track Length 2000 mm Matt aluminium 1 Pc

LM21.300/97 LM21 Single ceiling track Length 3000 mm Matt aluminium 1 Pc

LM21.400/97 LM21 Single ceiling track Length 4000 mm Matt aluminium 1 Pc

LM21.600/97 LM21 Single ceiling track Length 6000 mm Matt aluminium 1 Pc

LM21.200/91 LM21 Single ceiling track Length 2000 mm Polished aluminium 1 Pc

LM21.300/91 LM21 Single ceiling track Length 3000 mm Polished aluminium 1 Pc

LM21.400/91 LM21 Single ceiling track Length 4000 mm Polished aluminium 1 Pc

LM21.200/88 LM21 Single ceiling track Length 2000 mm Brushed steel-effect aluminium 1 Pc

LM21.300/88 LM21 Single ceiling track Length 3000 mm Brushed steel-effect aluminium 1 Pc

LM21.400/88 LM21 Single ceiling track Length 4000 mm Brushed steel-effect aluminium 1 Pc

LM21.600/88 LM21 Single ceiling track Length 6000 mm Brushed steel-effect aluminium 1 Pc

●LM3130,200/97 LM 313 high aluminium cover length 2000 mm Matt aluminium 1 Pc

●LM3130,300/97 LM 313 high aluminium cover length 3000 mm Matt aluminium 1 Pc

●LM3130,400/97 LM 313 high aluminium cover length 4000 mm Matt aluminium 1 Pc

●LM3130,600/97 LM 313 high aluminium cover length 6000 mm Matt aluminium 1 Pc

●LM3130,200/91 LM 313 high aluminium cover length 2000 mm Polished aluminium 1 Pc

●LM3130,300/91 LM 313 high aluminium cover length 3000 mm Polished aluminium 1 Pc

●LM3130,400/91 LM 313 high aluminium cover length 4000 mm Polished aluminium 1 Pc

●LM3130,200/88 LM 313 high aluminium cover length 2000 mm Brushed steel-effect aluminium 1 Pc

●LM3130,300/88 LM 313 high aluminium cover length 3000 mm Brushed steel-effect aluminium 1 Pc

●LM3130,400/88 LM 313 high aluminium cover length 4000 mm Brushed steel-effect aluminium 1 Pc

●LM3130,600/88 LM 313 high aluminium cover length 6000 mm Brushed steel-effect aluminium 1 Pc

ALUMINIUM SYSTEMS FOR SLIDING DOORS

Page 92

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 456/461 >>>

LARGHEZZA MAX VANO 950mm

mod. LM312000

S=20

LARGHEZZA MAX VANO 1450mm

mod. LM313000

S=20

LARGHEZZA MAX VANO 1955mm

mod. LM314000

141,32

141,32

303,69

376,50

340,84

350,65

445,75

391,22

553,30

745,71

627,61

154,23

206,12

184,57

78,90

111,80

144,71

197,46

84,82

120,70

156,57

83,62

118,90

154,17

211,64

38,77

51,87

64,96

78,59

50,92

75,63

112,16

41,28

55,64

69,99

86,13

ALUMINIUM SYSTEMS FOR SLIDING DOORS

Page 93 >>> CATALOGUE REFERENCE PAGE 461/465 >>>

LM3180/97 LM 213 high caps 74 x 45 x 1.5 mm Matt aluminium 1 Set

LM3180/91 LM 213 high caps 74 x 45 x 1.5 mm Polished aluminium 1 Set

LM3180/88 LM 213 high caps 74 x 45 x 1.5 mm Brushed steel-effect aluminium 1 Set

LM3185/97 High caps flush with wall 74 x 40 x 1.5 mm Matt aluminium 1 Set

LM3185/91 High caps flush with wall 74 x 40 x 1.5 mm Polished aluminium 1 Set

LM3185/88 High caps flush with wall 74 x 40 x 1.5 mm Brushed steel-effect aluminium 1 Set

LMGF/97 LMGF floor guide Matt aluminium 1 Pc

LMGF/91 LMGF floor guide Polished aluminium 1 Pc

LMGF/88 LMGF floor guide Brushed steel-effect aluminium 1 Pc

042,3102,071 Dämpfung- damper 60/100 kg White 1 Pc

042,3102,072 Dämpfung- damper 20/60 kg White 1 Pc

Mod. LM213 CEILING MOUNT WITH HIGH COVER - Door kit

LM213200B/97 Complete kit - opening width W.max 955 mm. Ceiling mount high cover Matt aluminium 1 Set

LM213200B/91 Complete kit - opening width W.max 955 mm. Ceiling mount high cover Polished aluminium 1 Set

LM213200B/88 Complete kit - opening width W.max 955 mm. Ceiling mount high cover Brushed steel-effect aluminium 1 Set

LM213300B/97 Complete kit - opening width W.max 1455 mm. Ceiling mount high cover Matt aluminium 1 Set

LM213300B/91 Complete kit - opening width W.max 1455 mm. Ceiling mount high cover Polished aluminium 1 Set

LM213300B/88 Complete kit - opening width W.max 1455 mm. Ceiling mount high cover Brushed steel-effect aluminium 1 Set

LM213400B/97 Complete kit - opening width W.max 1950 mm. Ceiling mount high cover Matt aluminium 1 Set

LM213400B/91 Complete kit - opening width W.max 1950 mm. Ceiling mount high cover Polished aluminium 1 Set

LM213400B/88 Complete kit - opening width W.max 1950 mm. Ceiling mount high cover Brushed steel-effect aluminium 1 Set

Mod. LM2F CEILING MOUNT WITH FIXED GLASS

LM3100/97 31 accessories set for glass pane Max 100 kg thickness 6/10 mm Matt aluminium 1 Set

LM3100/91 31 accessories set for glass pane Max 100 kg thickness 6/10 mm Polished aluminium 1 Set

LM3100/88 31 accessories set for glass pane Max 100 kg thickness 6/10 mm Brushed steel-effect aluminium 1 Set

LM21.200/97 LM21 Single ceiling track Length 2000 mm Matt aluminium 1 Pc

LM21.300/97 LM21 Single ceiling track Length 3000 mm Matt aluminium 1 Pc

LM21.400/97 LM21 Single ceiling track Length 4000 mm Matt aluminium 1 Pc

LM21.600/97 LM21 Single ceiling track Length 6000 mm Matt aluminium 1 Pc

LM21.200/91 LM21 Single ceiling track Length 2000 mm Polished aluminium 1 Pc

LM21.300/91 LM21 Single ceiling track Length 3000 mm Polished aluminium 1 Pc

LM21.400/91 LM21 Single ceiling track Length 4000 mm Polished aluminium 1 Pc

LM21.200/88 LM21 Single ceiling track Length 2000 mm Brushed steel-effect aluminium 1 Pc

LM21.300/88 LM21 Single ceiling track Length 3000 mm Brushed steel-effect aluminium 1 Pc

LM21.400/88 LM21 Single ceiling track Length 4000 mm Brushed steel-effect aluminium 1 Pc

LM21.600/88 LM21 Single ceiling track Length 6000 mm Brushed steel-effect aluminium 1 Pc

Art. Description Finish Q.ty EURO

LARGHEZZA MAX VANO 950mm

mod. LM312000

S=20

LARGHEZZA MAX VANO 1450mm

mod. LM313000

S=20

LARGHEZZA MAX VANO 1955mm

mod. LM314000

20,05

20,05

20,05

19,92

19,92

19,92

20,53

20,53

20,53

141,32

141,32

337,33

419,46

398,84

398,63

506,93

465,02

615,61

825,63

738,77

154,23

206,12

184,57

78,90

111,80

144,71

197,46

84,82

120,70

156,57

83,62

118,90

154,17

211,64

LM41,200/97 LM41 Fixed profile length 2000 mm Matt aluminium 1 Pc

LM41,300/97 LM41 Fixed profile length 3000 mm Matt aluminium 1 Pc

LM41,400/97 LM41 Fixed profile length 4000 mm Matt aluminium 1 Pc

LM41,600/97 LM41 Fixed profile length 6000 mm Matt aluminium 1 Pc

LM41,200/91 LM41 Fixed profile length 2000 mm Polished aluminium 1 Pc

LM41,300/91 LM41 Fixed profile length 3000 mm Polished aluminium 1 Pc

LM41,400/91 LM41 Fixed profile length 4000 mm Polished aluminium 1 Pc

LM41,200/88 LM41 Fixed profile length 2000 mm Brushed steel-effect aluminium 1 Pc

LM41,300/88 LM41 Fixed profile length 3000 mm Brushed steel-effect aluminium 1 Pc

LM41,400/88 LM41 Fixed profile length 4000 mm Brushed steel-effect aluminium 1 Pc

LM41,600/88 LM41 Fixed profile length 6000 mm Brushed steel-effect aluminium 1 Pc

LMU20,150/97 “U” profile length 1498 mm Matt aluminium 1 Pc

●LMU20,300/97 “U” profile length 3000 mm Matt aluminium 1 Pc

LMU20,150/91 “U” profile length 1498 mm Polished aluminium 1 Pc

●LMU20,300/91 “U” profile length 3000 mm Polished aluminium 1 Pc

LMU20,150/88 “U” profile length 1498 mm Brushed steel-effect aluminium 1 Pc

●LMU20,300/88 “U” profile length 3000 mm Brushed steel-effect aluminium 1 Pc

LMU20TP/97 “U” profile caps 20 x 16 x 1 mm Matt aluminium 1 Pc

LMU20TP/91 “U” profile caps 20 x 16 x 1 mm Polished aluminium 1 Pc

LMU20TP/88 “U” profile caps 20 x 16 x 1 mm Brushed steel-effect aluminium 1 Pc

●PBD3185/97 Side compensation profile for fixed glass L. 3000 mm 15 x 16 mm Matt aluminium 1 Pc

●PBD3185/91 Side compensation profile for fixed glass L. 3000 mm 15 x 16 mm Polished aluminium 1 Pc

●PBD3185/88 Side compensation profile for fixed glass L. 3000 mm 15 x 16 mm Brushed steel-effect aluminium 1 Pc

GTUP2 Glass holder profile - Thickness: 2mm Transparent Per m

GTUP2300 Glass holder profile pack 300 m Transparent 1 Set

GTUP2G Glass holder profile - Thickness: 2mm Embossed Per m

GTUP2300G Glass holder profile pack 300 m Embossed 1 Set

PBD3184,100/97 Upper bevelled profile Length 992 mm Matt aluminium 1 Pc

PBD3184,150/97 Upper bevelled profile Length 1498 mm Matt aluminium 1 Pc

●PBD3184/97 Upper bevelled profile Length 3000 mm Matt aluminium 1 Pc

PBD3184,100/91 Upper bevelled profile Length 992 mm Polished aluminium 1 Pc

PBD3184,150/91 Upper bevelled profile Length 1498 mm Polished aluminium 1 Pc

●PBD3184/91 Upper bevelled profile Length 3000 mm Polished aluminium 1 Pc

PBD3184,100/88 Upper bevelled profile Length 992 mm Brushed steel-effect aluminium 1 Pc

PBD3184,150/88 Upper bevelled profile Length 1498 mm Brushed steel-effect aluminium 1 Pc

●PBD3184/88 Upper bevelled profile Length 3000 mm Brushed steel-effect aluminium 1 Pc

●LM3130,200/97 LM 313 high aluminium cover length 2000 mm Matt aluminium 1 Pc

●LM3130,300/97 LM 313 high aluminium cover length 3000 mm Matt aluminium 1 Pc

●LM3130,400/97 LM 313 high aluminium cover length 4000 mm Matt aluminium 1 Pc

●LM3130,600/97 LM 313 high aluminium cover length 6000 mm Matt aluminium 1 Pc

●LM3130,200/91 LM 313 high aluminium cover length 2000 mm Polished aluminium 1 Pc

●LM3130,300/91 LM 313 high aluminium cover length 3000 mm Polished aluminium 1 Pc

●LM3130,400/91 LM 313 high aluminium cover length 4000 mm Polished aluminium 1 Pc

●LM3130,200/88 LM 313 high aluminium cover length 2000 mm Brushed steel-effect aluminium 1 Pc

●LM3130,300/88 LM 313 high aluminium cover length 3000 mm Brushed steel-effect aluminium 1 Pc

●LM3130,400/88 LM 313 high aluminium cover length 4000 mm Brushed steel-effect aluminium 1 Pc

ALUMINIUM SYSTEMS FOR SLIDING DOORS

Page 94

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 466/467 >>>

98,19

133,47

173,26

238,77

117,40

169,06

220,72

105,92

151,84

197,77

275,52

28,18

40,40

31,33

46,70

29,98

43,99

4,38

4,45

4,45

34,01

40,87

36,88

0,86

256,61

1,25

376,35

14,45

17,68

19,40

17,75

22,63

29,30

14,96

18,44

20,92

38,77

51,87

64,96

78,59

50,92

75,63

112,16

41,28

55,64

69,99

ALUMINIUM SYSTEMS FOR SLIDING DOORS

Page 95 >>> CATALOGUE REFERENCE PAGE 467/474 >>>

LM3130,600/88 LM 313 high aluminium cover length 6000 mm Brushed steel-effect aluminium 1 Pc

LMGF/97 LMGF floor guide Matt aluminium 1 Pc

LMGF/91 LMGF floor guide Polished aluminium 1 Pc

LMGF/88 LMGF floor guide Brushed steel-effect aluminium 1 Pc

042,3102,071 Dämpfung- damper 60/100 kg White 1 Pc

042,3102,072 Dämpfung- damper 20/60 kg White 1 Pc

Mod. LM2F CEILING MOUNT WITH FIXED GLASS - Door kit

LM2F200B/97 Compl. kit-opening width W.max 975mm. Ceiling mount high cov. with fixed Matt aluminium 1 Set

LM2F200B/91 Compl. kit-opening width W.max 975mm. Ceiling mount high cov. with fixed Polished aluminium 1 Set

LM2F200B/88 Compl. kit-opening width W.max 975mm. Ceiling mount high cov. with fixed Brushed steel-effect aluminium 1 Set

LM2F300B/97 Compl. kit-opening width W.max 1475mm. Ceiling mount high cov. with fixed Matt aluminium 1 Set

LM2F300B/91 Compl. kit-opening width W.max 1475mm. Ceiling mount high cov. with fixed Polished aluminium 1 Set

LM2F300B/88 Compl. kit-opening width W.max 1475mm. Ceiling mount high cov. with fixed Brushed steel-effect aluminium 1 Set

LM2F400B/97 Compl. kit-opening width W.max 1950 mm. Ceiling mount high cov. with fixed Matt aluminium 1 Set

LM2F400B/91 Compl. kit-opening width W.max 1950 mm. Ceiling mount high cov. with fixed Polished aluminium 1 Set

LM2F400B/88 Comple kit-opening width W.max 1950 mm. Ceiling mount high cov. with fixed Brushed steel-effect aluminium 1 Set

DRAGGING SYSTEM Mod. LMTR 2 DOORS + FIXED GLASS

LMTR2DX/97 Accessory for 2 door dragging system + right fixed glass Matt aluminium 1 Set

LMTR2DX/91 Accessory for 2 door dragging system + right fixed glass Polished aluminium 1 Set

LMTR2DX/88 Accessory for 2 door dragging system + right fixed glass Brushed steel-effect aluminium 1 Set

LMTR2SX/97 Accessory for 2 door dragging system + left fixed glass Matt aluminium 1 Set

LMTR2SX/91 Accessory for 2 door dragging system + left fixed glass Polished aluminium 1 Set

LMTR2SX/88 Accessory for 2 door dragging system + left fixed glass Brushed steel-effect aluminium 1 Set

LM2950C/97 295 accessories set for glass pane Max 100 kg thickness 6/10 mm Matt aluminium 1 Set

LM2950C/91 295 accessories set for glass pane Max 100 kg thickness 6/10 mm Polished aluminium 1 Set

LM2950C/88 295 accessories set for glass pane Max 100 kg thickness 6/10 mm Brushed steel-effect aluminium 1 Set

LM51.200/97 LM51 ceiling mount double track Length 2000 mm Matt aluminium 1 Pc

LM51.300/97 LM51 ceiling mount double track Length 3000 mm Matt aluminium 1 Pc

LM51.400/97 LM51 ceiling mount double track Length 4000 mm Matt aluminium 1 Pc

LM51.600/97 LM51 ceiling mount double track Length 6000 mm Matt aluminium 1 Pc

LM51.200/91 LM51 ceiling mount double track Length 2000 mm Polished aluminium 1 Pc

LM51.300/91 LM51 ceiling mount double track Length 3000 mm Polished aluminium 1 Pc

LM51.400/91 LM51 ceiling mount double track Length 4000 mm Polished aluminium 1 Pc

LM51.200/88 LM51 ceiling mount double track Length 2000 mm Brushed steel-effect aluminium 1 Pc

LM51.300/88 LM51 ceiling mount double track Length 3000 mm Brushed steel-effect aluminium 1 Pc

LM51.400/88 LM51 ceiling mount double track Length 4000 mm Brushed steel-effect aluminium 1 Pc

LM51.600/88 LM51 ceiling mount double track Length 6000 mm Brushed steel-effect aluminium 1 Pc

LM41,200/97 LM41 Fixed profile length 2000 mm Matt aluminium 1 Pc

LM41,300/97 LM41 Fixed profile length 3000 mm Matt aluminium 1 Pc

LM41,400/97 LM41 Fixed profile length 4000 mm Matt aluminium 1 Pc

LM41,600/97 LM41 Fixed profile length 6000 mm Matt aluminium 1 Pc

Art. Description Finish Q.ty EURO

LARGHEZZA MAX VANO 950mm

mod. LM312000

LARGHEZZA MAX VANO 1450mm

mod. LM313000

LARGHEZZA MAX VANO 1955mm

mod. LM314000

86,13

20,53

20,53

20,53

141,32

141,32

429,51

526,87

494,55

526,05

657,52

611,61

776,69

1.003,32

924,71

178,43

178,43

178,43

178,43

178,43

178,43

181,15

199,35

189,77

122,31

176,42

230,53

324,67

137,59

199,34

261,09

134,53

194,76

254,99

361,36

98,19

133,47

173,26

238,77

LM41,200/91 LM41 Fixed profile length 2000 mm Polished aluminium 1 Pc

LM41,300/91 LM41 Fixed profile length 3000 mm Polished aluminium 1 Pc

LM41,400/91 LM41 Fixed profile length 4000 mm Polished aluminium 1 Pc

LM41,200/88 LM41 Fixed profile length 2000 mm Brushed steel-effect aluminium 1 Pc

LM41,300/88 LM41 Fixed profile length 3000 mm Brushed steel-effect aluminium 1 Pc

LM41,400/88 LM41 Fixed profile length 4000 mm Brushed steel-effect aluminium 1 Pc

LM41,600/88 LM41 Fixed profile length 6000 mm Brushed steel-effect aluminium 1 Pc

LMU20,150/97 “U” profile length 1498 mm Matt aluminium 1 Pc

●LMU20,300/97 “U” profile length 3000 mm Matt aluminium 1 Pc

LMU20,150/91 “U” profile length 1498 mm Polished aluminium 1 Pc

●LMU20,300/91 “U” profile length 3000 mm Polished aluminium 1 Pc

LMU20,150/88 “U” profile length 1498 mm Brushed steel-effect aluminium 1 Pc

●LMU20,300/88 “U” profile length 3000 mm Brushed steel-effect aluminium 1 Pc

LMU20TP/97 “U” profile caps 20 x 16 x 1 mm Matt aluminium 1 Pc

LMU20TP/91 “U” profile caps 20 x 16 x 1 mm Polished aluminium 1 Pc

LMU20TP/88 “U” profile caps 20 x 16 x 1 mm Brushed steel-effect aluminium 1 Pc

●PBD3185/97 Side compensation profile for fixed glass L. 3000 mm 15 x 16 mm Matt aluminium 1 Pc

●PBD3185/91 Side compensation profile for fixed glass L. 3000 mm 15 x 16 mm Polished aluminium 1 Pc

●PBD3185/88 Side compensation profile for fixed glass L. 3000 mm 15 x 16 mm Brushed steel-effect aluminium 1 Pc

GTUP2 Glass holder profile - Thickness: 2mm Transparent Per m

GTUP2300 Glass holder profile pack 300 m Transparent 1 Set

GTUP2G Glass holder profile - Thickness: 2mm Embossed Per m

GTUP2300G Glass holder profile pack 300 m Embossed 1 Set

PBD3184,100/97 Upper bevelled profile Length 992 mm Matt aluminium 1 Pc

PBD3184,150/97 Upper bevelled profile Length 1498 mm Matt aluminium 1 Pc

●PBD3184/97 Upper bevelled profile Length 3000 mm Matt aluminium 1 Pc

PBD3184,100/91 Upper bevelled profile Length 992 mm Polished aluminium 1 Pc

PBD3184,150/91 Upper bevelled profile Length 1498 mm Polished aluminium 1 Pc

●PBD3184/91 Upper bevelled profile Length 3000 mm Polished aluminium 1 Pc

PBD3184,100/88 Upper bevelled profile Length 992 mm Brushed steel-effect aluminium 1 Pc

PBD3184,150/88 Upper bevelled profile Length 1498 mm Brushed steel-effect aluminium 1 Pc

●PBD3184/88 Upper bevelled profile Length 3000 mm Brushed steel-effect aluminium 1 Pc

●LM3130,200/97 LM 313 high aluminium cover length 2000 mm Matt aluminium 1 Pc

●LM3130,300/97 LM 313 high aluminium cover length 3000 mm Matt aluminium 1 Pc

●LM3130,400/97 LM 313 high aluminium cover length 4000 mm Matt aluminium 1 Pc

●LM3130,600/97 LM 313 high aluminium cover length 6000 mm Matt aluminium 1 Pc

●LM3130,200/91 LM 313 high aluminium cover length 2000 mm Polished aluminium 1 Pc

●LM3130,300/91 LM 313 high aluminium cover length 3000 mm Polished aluminium 1 Pc

●LM3130,400/91 LM 313 high aluminium cover length 4000 mm Polished aluminium 1 Pc

●LM3130,200/88 LM 313 high aluminium cover length 2000 mm Brushed steel-effect aluminium 1 Pc

●LM3130,300/88 LM 313 high aluminium cover length 3000 mm Brushed steel-effect aluminium 1 Pc

●LM3130,400/88 LM 313 high aluminium cover length 4000 mm Brushed steel-effect aluminium 1 Pc

●LM3130,600/88 LM 313 high aluminium cover length 6000 mm Brushed steel-effect aluminium 1 Pc

042,3102,071 Dämpfung- damper 60/100 kg White 1 Pc

042,3102,072 Dämpfung- damper 20/60 kg White 1 Pc

ALUMINIUM SYSTEMS FOR SLIDING DOORS

Page 96

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 474/476 >>>

117,40

169,06

220,72

105,92

151,84

197,77

275,52

28,18

40,40

31,33

46,70

29,98

43,99

4,38

4,45

4,45

34,01

40,87

36,88

0,86

256,61

1,25

376,35

14,45

17,68

19,40

17,75

22,63

29,30

14,96

18,44

20,92

38,77

51,87

64,96

78,59

50,92

75,63

112,16

41,28

55,64

69,99

86,13

141,32

141,32

ALUMINIUM SYSTEMS FOR SLIDING DOORS

Page 97 >>> CATALOGUE REFERENCE PAGE 476/481 >>>

HW,18619 Wall mounted door stop with glass door centring White 1 Pc

LMP0/97 Dragging accessory with pull handle Matt aluminium 1 Pc

LMP0/91 Dragging accessory with pull handle Polished aluminium 1 Pc

LMP0/88 Dragging accessory with pull handle Brushed steel-effect aluminium 1 Pc

DRAGGING SYSTEM Mod. LMTR 2 DOORS + FIXED GLASS-Door kit

LMTRA3COVDX/97 Complete kit max opening width 3000 mm with 2 dragging doors Matt aluminium 1 Set

with right assembly fixed glass, with clamps fitted with cover

LMTRA3COVDX/91 Complete kit max opening width 3000 mm with 2 dragging doors Polished aluminium 1 Set

with right assembly fixed glass, with clamps fitted with cover

LMTRA3COVDX/88 Complete kit max opening width 3000 mm with 2 dragging doors Brushed steel-effect aluminium 1 Set

with right assembly fixed glass, with clamps fitted with cover

LMTRA3COVSX/97 Complete kit max opening width 3000 mm with 2 dragging doors Matt aluminium 1 Set

with left assembly fixed glass, with clamps fitted with cover

LMTRA3COVSX/91 Complete kit max opening width 3000 mm with 2 dragging doors Polished aluminium 1 Set

with left assembly fixed glass, with clamps fitted with cover

LMTRA3COVSX/88 Complete kit max opening width 3000 mm with 2 dragging doors Brushed steel-effect aluminium 1 Set

with left assembly fixed glass, with clamps fitted with cover

LMTRB3COVDX/97 Complete kit max opening width 3000 mm with 2 dragging doors Matt aluminium 1 Set

with right assembly double fixed glass, with clamps fitted with cover

LMTRB3COVDX/91 Complete kit max opening width 3000 mm with 2 dragging doors Polished aluminium 1 Set

with right assembly double fixed glass, with clamps fitted with cover

LMTRB3COVDX/88 Complete kit max opening width 3000 mm with 2 dragging doors Brushed steel-effect aluminium 1 Set

with right assembly double fixed glass, with clamps fitted with cover

LMTRB3COVSX/97 Complete kit max opening width 3000 mm with 2 dragging doors Matt aluminium 1 Set

with left assembly double fixed glass, with clamps fitted with cover

LMTRB3COVSX/91 Complete kit max opening width 3000 mm with 2 dragging doors Polished aluminium 1 Set

with left assembly double fixed glass, with clamps fitted with cover

LMTRB3COVSX/88 Complete kit max opening width 3000 mm with 2 dragging doors Brushed steel-effect aluminium 1 Set

with left assembly double fixed glass, with clamps fitted with cover

LMTRC3COVDX/97 Complete kit max opening width 3000 mm with 2 dragging doors Matt aluminium 1 Set

right mount rollaway, with clamps fitted with cover

LMTRC3COVDX/91 Complete kit max opening width 3000 mm with 2 dragging doors Polished aluminium 1 Set

right mount rollaway, with clamps fitted with cover

LMTRC3COVDX/88 Complete kit max opening width 3000 mm with 2 dragging doors Brushed steel-effect aluminium 1 Set

right mount rollaway, with clamps fitted with cover

LMTRC3COVSX/97 Complete kit max opening width 3000 mm with 2 dragging doors Matt aluminium 1 Set

left mount rollaway, with clamps fitted with cover

LMTRC3COVSX/91 Complete kit max opening width 3000 mm with 2 dragging doors Polished aluminium 1 Set

left mount rollaway, with clamps fitted with cover

LMTRC3COVSX/88 Complete kit max opening width 3000 mm with 2 dragging doors Brushed steel-effect aluminium 1 Set

left mount rollaway, with clamps fitted with cover

Art. Description Finish Q.ty EURO

LARGHEZZA MAX VANO 3052mm

LARGHEZZA MAX VANO 3052mm

LARGHEZZA MAX VANO 3052mm

LARGHEZZA MAX VANO 3052mm

LARGHEZZA MAX VANO 3052mm

LARGHEZZA MAX VANO 3052mm

47,90

18,31

18,31

21,67

973,68

1.087,91

1.031,57

973,68

1.087,91

1.031,57

1.097,02

1.218,63

1.169,67

1.097,02

1.218,63

1.169,67

820,03

915,27

861,90

820,03

915,27

861,90

DRAGGING SYSTEM Mod. LMTR 3 DOORS + FIXED GLASS

LMTR3DX/97 Accessory for 3 door dragging system + right fixed glass Matt aluminium 1 Set

LMTR3DX/91 Accessory for 3 door dragging system + right fixed glass Polished aluminium 1 Set

LMTR3DX/88 Accessory for 3 door dragging system + right fixed glass Brushed steel-effect aluminium 1 Set

LMTR3SX/97 Accessory for 3 door dragging system + left fixed glass Matt aluminium 1 Set

LMTR3SX/91 Accessory for 3 door dragging system + left fixed glass Polished aluminium 1 Set

LMTR3SX/88 Accessory for 3 door dragging system + left fixed glass Brushed steel-effect aluminium 1 Set

LM2950C/97 295 accessories set for glass pane Max 100 kg thickness 6/10 mm Matt aluminium 1 Set

LM2950C/91 295 accessories set for glass pane Max 100 kg thickness 6/10 mm Polished aluminium 1 Set

LM2950C/88 295 accessories set for glass pane Max 100 kg thickness 6/10 mm Brushed steel-effect aluminium 1 Set

LM61.200/97 LM61 Triple ceiling mount track Length 2000 mm Matt aluminium 1 Pc

LM61.300/97 LM61 Triple ceiling mount track Length 3000 mm Matt aluminium 1 Pc

LM61.400/97 LM61 Triple ceiling mount track Length 4000 mm Matt aluminium 1 Pc

LM61.600/97 LM61 Triple ceiling mount track Length 6000 mm Matt aluminium 1 Pc

LM61.200/91 LM61 Triple ceiling mount track Length 2000 mm Polished aluminium 1 Pc

LM61.300/91 LM61 Triple ceiling mount track Length 3000 mm Polished aluminium 1 Pc

LM61.400/91 LM61 Triple ceiling mount track Length 4000 mm Polished aluminium 1 Pc

LM61.200/88 LM61 Triple ceiling mount track Length 2000 mm Brushed steel-effect aluminium 1 Pc

LM61.300/88 LM61 Triple ceiling mount track Length 3000 mm Brushed steel-effect aluminium 1 Pc

LM61.400/88 LM61 Triple ceiling mount track Length 4000 mm Brushed steel-effect aluminium 1 Pc

LM61.600/88 LM61 Triple ceiling mount track Length 6000 mm Brushed steel-effect aluminium 1 Pc

LM41,200/97 LM41 Fixed profile length 2000 mm Matt aluminium 1 Pc

LM41,300/97 LM41 Fixed profile length 3000 mm Matt aluminium 1 Pc

LM41,400/97 LM41 Fixed profile length 4000 mm Matt aluminium 1 Pc

LM41,600/97 LM41 Fixed profile length 6000 mm Matt aluminium 1 Pc

LM41,200/91 LM41 Fixed profile length 2000 mm Polished aluminium 1 Pc

LM41,300/91 LM41 Fixed profile length 3000 mm Polished aluminium 1 Pc

LM41,400/91 LM41 Fixed profile length 4000 mm Polished aluminium 1 Pc

LM41,200/88 LM41 Fixed profile length 2000 mm Brushed steel-effect aluminium 1 Pc

LM41,300/88 LM41 Fixed profile length 3000 mm Brushed steel-effect aluminium 1 Pc

LM41,400/88 LM41 Fixed profile length 4000 mm Brushed steel-effect aluminium 1 Pc

LM41,600/88 LM41 Fixed profile length 6000 mm Brushed steel-effect aluminium 1 Pc

LMU20,150/97 “U” profile length 1498 mm Matt aluminium 1 Pc

●LMU20,300/97 “U” profile length 3000 mm Matt aluminium 1 Pc

LMU20,150/91 “U” profile length 1498 mm Polished aluminium 1 Pc

●LMU20,300/91 “U” profile length 3000 mm Polished aluminium 1 Pc

LMU20,150/88 “U” profile length 1498 mm Brushed steel-effect aluminium 1 Pc

●LMU20,300/88 “U” profile length 3000 mm Brushed steel-effect aluminium 1 Pc

LMU20TP/97 “U” profile caps 20 x 16 x 1 mm Matt aluminium 1 Pc

LMU20TP/91 “U” profile caps 20 x 16 x 1 mm Polished aluminium 1 Pc

LMU20TP/88 “U” profile caps 20 x 16 x 1 mm Brushed steel-effect aluminium1 Pc

●PBD3185/97 Side compensation profile for fixed glass L. 3000 mm 15 x 16 mm Matt aluminium 1 Pc

●PBD3185/91 Side compensation profile for fixed glass L. 3000 mm 15 x 16 mm Polished aluminium 1 Pc

●PBD3185/88 Side compensation profile for fixed glass L. 3000 mm 15 x 16 mm Brushed steel-effect aluminium 1 Pc

ALUMINIUM SYSTEMS FOR SLIDING DOORS

Page 98

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 485/487 >>>

299,07

299,07

299,07

299,07

299,07

299,07

181,15

199,35

189,77

156,60

227,85

299,11

427,54

165,61

241,37

317,14

174,13

254,15

334,18

480,14

98,19

133,47

173,26

238,77

117,40

169,06

220,72

105,92

151,84

197,77

275,52

28,18

40,40

31,33

46,70

29,98

43,99

4,38

4,45

4,45

34,01

40,87

36,88

ALUMINIUM SYSTEMS FOR SLIDING DOORS

Page 99 >>> CATALOGUE REFERENCE PAGE 487/493 >>>

GTUP2 Glass holder profile - Thickness: 2mm Transparent Per m

GTUP2300 Glass holder profile pack 300 m Transparent 1 Set

GTUP2G Glass holder profile - Thickness: 2mm Embossed Per m

GTUP2300G Glass holder profile pack 300 m Embossed 1 Set

PBD3184,100/97 Upper bevelled profile Length 992 mm Matt aluminium 1 Pc

PBD3184,150/97 Upper bevelled profile Length 1498 mm Matt aluminium 1 Pc

●PBD3184/97 Upper bevelled profile Length 3000 mm Matt aluminium 1 Pc

PBD3184,100/91 Upper bevelled profile Length 992 mm Polished aluminium 1 Pc

PBD3184,150/91 Upper bevelled profile Length 1498 mm Polished aluminium 1 Pc

●PBD3184/91 Upper bevelled profile Length 3000 mm Polished aluminium 1 Pc

PBD3184,100/88 Upper bevelled profile Length 992 mm Brushed steel-effect aluminium 1 Pc

PBD3184,150/88 Upper bevelled profile Length 1498 mm Brushed steel-effect aluminium 1 Pc

●PBD3184/88 Upper bevelled profile Length 3000 mm Brushed steel-effect aluminium 1 Pc

●LM3130,200/97 LM 313 high aluminium cover length 2000 mm Matt aluminium 1 Pc

●LM3130,300/97 LM 313 high aluminium cover length 3000 mm Matt aluminium 1 Pc

●LM3130,400/97 LM 313 high aluminium cover length 4000 mm Matt aluminium 1 Pc

●LM3130,600/97 LM 313 high aluminium cover length 6000 mm Matt aluminium 1 Pc

●LM3130,200/91 LM 313 high aluminium cover length 2000 mm Polished aluminium 1 Pc

●LM3130,300/91 LM 313 high aluminium cover length 3000 mm Polished aluminium 1 Pc

●LM3130,400/91 LM 313 high aluminium cover length 4000 mm Polished aluminium 1 Pc

●LM3130,200/88 LM 313 high aluminium cover length 2000 mm Brushed steel-effect aluminium 1 Pc

●LM3130,300/88 LM 313 high aluminium cover length 3000 mm Brushed steel-effect aluminium 1 Pc

●LM3130,400/88 LM 313 high aluminium cover length 4000 mm Brushed steel-effect aluminium 1 Pc

●LM3130,600/88 LM 313 high aluminium cover length 6000 mm Brushed steel-effect aluminium 1 Pc

042,3102,071 Dämpfung- damper 60/100 kg White 1 Pc

042,3102,072 Dämpfung- damper 20/60 kg White 1 Pc

HW,18619 Wall mounted door stop with glass door centring White 1 Pc

LMP0/97 Dragging accessory with pull handle Matt aluminium 1 Pc

LMP0/91 Dragging accessory with pull handle Polished aluminium 1 Pc

LMP0/88 Dragging accessory with pull handle Brushed steel-effect aluminium 1 Pc

DRAGGING SYSTEM Mod. LMTR 3 DOORS + FIXED GLASS - door kit

LMTRD4COVDX/97 Complete kit max opening width 4000 mm with 3 dragging doors Matt aluminium 1 Set

plus right assembly fixed, with clamps fitted with cover

LMTRD4COVDX/91 Complete kit max opening width 4000 mm with 3 dragging doors Polished aluminium 1 Set

plus right assembly fixed, with clamps fitted with cover

LMTRD4COVDX/88 Complete kit max opening width 4000 mm with 3 dragging doors Brushed steel-effect aluminium 1 Set

plus right assembly fixed, with clamps fitted with cover

LMTRD4COVSX/97 Complete kit max opening width 4000 mm with 3 dragging doors Matt aluminium 1 Set

plus left assembly fixed, with clamps fitted with cover

LMTRD4COVSX/91 Complete kit max opening width 4000 mm with 3 dragging doors Polished aluminium 1 Set

plus left assembly fixed, with clamps fitted with cover

LMTRD4COVSX/88 Complete kit max opening width 4000 mm with 3 dragging doors Brushed steel-effect aluminium 1 Set

plus left assembly fixed, with clamps fitted with cover

Art. Description Finish Q.ty EURO

LARGHEZZA MAX VANO 3052mm

LARGHEZZA MAX VANO 3052mm

0,86

256,61

1,25

376,35

14,45

17,68

19,40

17,75

22,63

29,30

14,96

18,44

20,92

38,77

51,87

64,96

78,59

50,92

75,63

112,16

41,28

55,64

69,99

86,13

141,32

141,32

47,90

18,31

18,31

21,67

1.456,74

1.619,57

1.547,36

1.456,74

1.619,57

1.547,36

LMTRE4COVDX/97 Complete kit max opening width 4000 mm with 3 dragging doors Matt aluminium 1 Set

right assembly double fixed, with clamps fitted with cover

LMTRE4COVDX/91 Complete kit max opening width 4000 mm with 3 dragging doors Polished aluminium 1 Set

right assembly double fixed, with clamps fitted with cover

LMTRE4COVDX/88 Complete kit max opening width 4000 mm with 3 dragging doors Brushed steel-effect aluminium 1 Set

right assembly double fixed, with clamps fitted with cover

LMTRE4COVSX/97 Complete kit max opening width 4000 mm with 3 dragging doors Matt aluminium 1 Set

left assembly double fixed, with clamps fitted with cover

LMTRE4COVSX/91 Complete kit max opening width 4000 mm with 3 dragging doors Polished aluminium 1 Set

left assembly double fixed, with clamps fitted with cover

LMTRE4COVSX/88 Complete kit max opening width 4000 mm with 3 dragging doors Brushed steel-effect aluminium 1 Set

left assembly double fixed, with clamps fitted with cover

LMTRF4COVDX/97 Complete kit max opening width 4000 mm with 3 dragging doors Matt aluminium 1 Set

right mount rollaway, with clamps fitted with cover

LMTRF4COVDX/91 Complete kit max opening width 4000 mm with 3 dragging doors Polished aluminium 1 Set

right mount rollaway, with clamps fitted with cover

LMTRF4COVDX/88 Complete kit max opening width 4000 mm with 3 dragging doors Brushed steel-effect aluminium 1 Set

right mount rollaway, with clamps fitted with cover

LMTRF4COVSX/97 Complete kit max opening width 4000 mm with 3 dragging doors Matt aluminium 1 Set

left mount rollaway, with clamps fitted with cover

LMTRF4COVSX/91 Complete kit max opening width 4000 mm with 3 dragging doors Polished aluminium 1 Set

left mount rollaway, with clamps fitted with cover

LMTRF4COVSX/88 Complete kit max opening width 4000 mm with 3 dragging doors Brushed steel-effect aluminium 1 Set

left mount rollaway, with clamps fitted with cover

LM SERIES ACCESSORIES

DAMPER

042,3102,071 Dämpfung- damper 60/100 kg White 1 Pc

042,3102,072 Dämpfung- damper 20/60 kg White 1 Pc

042,3114,071 Slot cover White 1 Pc

ALUMINIUM CLAMPS

CERPOS500/10 Aluminium clamp without glass processing 1 Pc

CERPOS170ALL/97 Clamps for 170 aluminium sliding doors Matt aluminium 1 Pc

CERPOS170ALL/91 Clamps for 170 aluminium sliding doors Polished aluminium 1 Pc

CERPOS170ALL/88 Clamps for 170 aluminium sliding doors Brushed steel-effect aluminium 1 Pc

CERPOS170ALL/10 Clamps for 170 aluminium sliding doors Raw-finish aluminium 1 Pc

CLAMPS WITH COVER

CERPOS170COV/97 Clamps for 170 aluminium sliding doors with cover Matt aluminium 1 Pc

CERPOS170COV/91 Clamps for 170 aluminium sliding doors with cover Polished aluminium 1 Pc

CERPOS170COV/88 Clamps for 170 aluminium sliding doors with cover Brushed steel-effect aluminium 1 Pc

ALUMINIUM SYSTEMS FOR SLIDING DOORS

Page 100

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 493/499 >>>

LARGHEZZA MAX VANO 3052mm

LARGHEZZA MAX VANO 3052mm

LARGHEZZA MAX VANO 3052mm

LARGHEZZA MAX VANO 3052mm

1.606,77

1.765,42

1.717,02

1.606,77

1.765,42

1.717,02

1.276,39

1.419,98

1.346,12

1.276,39

1.419,98

1.346,12

141,32

141,32

10,26

39,52

29,22

44,31

33,53

22,75

41,19

50,29

45,50

ALUMINIUM SYSTEMS FOR SLIDING DOORS

Page 101 >>> CATALOGUE REFERENCE PAGE 499/503 >>>

BRASS CLAMPS

CERPOS170/1 Brass clamps for sliding doors 170 Chrome 1 Pc

CERPOS170/3 Brass clamps for sliding doors 170 Brushed nickel 1 Pc

CERPOS120/1 Clamps for sliding doors 120 Chrome 1 Pc

CERPOS120/3 Clamps for sliding doors 120 Brushed nickel 1 Pc

CERPOS80/1 Clamps for sliding doors 80 Chrome 1 Pc

CERPOS80/3 Clamps for sliding doors 80 Brushed nickel 1 Pc

LOCKS FOR SLIDING DOORS

SERSD610S/97 SD 600 lock with handle, Lock + lock, different key Matt aluminium 1 Pc

SERSD610S/91 SD 600 lock with handle, Lock + lock, different key Polished aluminium 1 Pc

SERSD610S/88 SD 600 lock with handle, Lock + lock, different key Brushed steel-effect aluminium 1 Pc

SERSD610SU/97 SD 600 Lock with handle, Lock + lock, single key Matt aluminium 1 Pc

SERSD610SU/91 SD 600 Lock with handle, Lock + lock, single key Polished aluminium 1 Pc

SERSD610SU/88 SD 600 Lock with handle, Lock + lock, single key Brushed steel-effect aluminium 1 Pc

SERSD610P/97 SD 600 lock with handle, Knob + lock Matt aluminium 1 Pc

SERSD610P/91 SD 600 lock with handle, Knob + lock Polished aluminium 1 Pc

SERSD610P/88 SD 600 lock with handle, Knob + lock Brushed steel-effect aluminium 1 Pc

SERSD620/97 Striking plate for SD 600 lock with handle for double door Matt aluminium 1 Pc

SERSD620/91 Striking plate for SD 600 lock with handle for double door Polished aluminium 1 Pc

SERSD620/88 Striking plate for SD 600 lock with handle for double door Brushed steel-effect aluminium 1 Pc

DQS15/97 Latch with lock/knob, HD SQUARE series Matt aluminium 1 Pc

DQS15/88 Latch with lock/knob, HD SQUARE series Brushed steel-effect aluminium 1 Pc

DQS15/91 Latch with lock/knob, HD SQUARE series Polished aluminium 1 Pc

DQS25/97 Latch with lock/knob, with handle, HD SQUARE series Matt aluminium 1 Pc

DQS25/88 Latch with lock/knob, with handle, HD SQUARE series Brushed steel-effect aluminium 1 Pc

DQS25/91 Latch with lock/knob, with handle, HD SQUARE series Polished aluminium 1 Pc

DQS13/97 Latch with double knob, HD SQUARE series Matt aluminium 1 Pc

DQS13/88 Latch with double knob, HD SQUARE series Brushed steel-effect aluminium 1 Pc

DQS13/91 Latch with double knob, HD SQUARE series Polished aluminium 1 Pc

DQS23/97 Latch with double knob, with handle, HD SQUARE series Matt aluminium 1 Pc

DQS23/88 Latch with double knob, with handle, HD SQUARE series Brushed steel-effect aluminium 1 Pc

DQS23/91 Latch with double knob, with handle, HD SQUARE series Polished aluminium 1 Pc

Art. Description Finish Q.ty EURO

49,50

56,50

55,42

62,41

48,14

53,77

131,79

159,91

141,35

132,23

160,24

141,79

139,32

167,98

151,39

75,47

91,54

91,54

98,68

105,93

111,80

130,98

144,10

154,98

89,53

98,66

104,38

121,83

136,83

147,57

DQS11/97 Vacant/engaged privacy latch, HD SQUARE series Matt aluminium 1 Pc

DQS11/88 Vacant/engaged privacy latch, HD SQUARE series Brushed steel-effect aluminium 1 Pc

DQS11/91 Vacant/engaged privacy latch, HD SQUARE series Polished aluminium 1 Pc

DQS21/97 Vacant/engaged privacy latch, with handle, HD SQUARE series Matt aluminium 1 Pc

DQS21/88 Vacant/engaged privacy latch, with handle, HD SQUARE series Brushed steel-effect aluminium 1 Pc

DQS21/91 Vacant/engaged privacy latch, with handle, HD SQUARE series Polished aluminium 1 Pc

DQS37/97 Keeper side plate, HD SQUARE series Matt aluminium 1 Pc

DQS37/88 Keeper side plate, HD SQUARE series Brushed steel-effect aluminium 1 Pc

DQS37/91 Keeper side plate, HD SQUARE series Polished aluminium 1 Pc

SERMG10S/1 MG lock, Lock + lock Chrome 1 Pc

SERMG10S/3 MG lock, Lock + lock Brushed nickel 1 Pc

SERMG10S/45 MG lock, Lock + lock Matt Aluminium effect 1 Pc

SERMG10SU/1 MG lock, Lock + lock, single key Chrome 1 Pc

SERMG10SU/3 MG lock, Lock + lock, single key Brushed nickel 1 Pc

SERMG10SU/45 MG lock, Lock + lock, single key Matt Aluminium effect 1 Pc

SERMG10P/1 MG Lock, Knob + lock Chrome 1 Pc

SERMG10P/3 MG Lock, Knob + lock Brushed nickel 1 Pc

SERMG10P/45 MG Lock, Knob + lock Matt Aluminium effect 1 Pc

SERMGC1/1 Striking plate for MG lock for double doors Chrome 1 Pc

SERMGC1/3 Striking plate for MG lock for double doors Brushed nickel 1 Pc

SERMGC1/45 Striking plate for MG lock for double doors Matt Aluminium effect 1 Pc

SERMGM10S/1 MGM lock with handle, Lock + lock Chrome 1 Pc

SERMGM10S/3 MGM lock with handle, Lock + lock Brushed nickel 1 Pc

SERMGM10S/45 MGM lock with handle, Lock + lock Matt Aluminium effect 1 Pc

SERMGM10SU/1 MGM lock with handle, Lock + lock, single key Chrome 1 Pc

SERMGM10SU/3 MGM lock with handle, Lock + lock, single key Brushed nickel 1 Pc

SERMGM10SU/45 MGM lock with handle, Lock + lock, single key Matt Aluminium effect 1 Pc

SERMGM10P/1 MGM lock with handle, Knob + lock Chrome 1 Pc

SERMGM10P/3 MGM lock with handle, Knob + lock Brushed nickel 1 Pc

SERMGM10P/45 MGM lock with handle, Knob + lock Matt Aluminium effect 1 Pc

SERMG19/1 Wall striking plate for MG and MGM lock Chrome 1 Pc

SERMG19/3 Wall striking plate for MG and MGM lock Brushed nickel 1 Pc

SERMG19/45 Wall striking plate for MG and MGM lock Matt Aluminium effect 1 Pc

SERMG12/1 Glass striking plate for MG and MGM lock Chrome 1 Pc

SERMG12/3 Glass striking plate for MG and MGM lock Brushed nickel 1 Pc

SERMG12/45 Glass striking plate for MG and MGM lock Matt Aluminium effect 1 Pc

ALUMINIUM SYSTEMS FOR SLIDING DOORS

Page 102

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 504/509 >>>

85,46

92,95

98,02

117,76

131,11

141,21

55,95

60,75

65,70

121,50

122,03

123,28

121,82

122,45

125,07

132,20

132,20

137,45

68,20

68,20

70,82

159,80

160,32

160,32

159,77

160,29

160,29

170,50

170,50

173,12

78,09

78,09

79,29

97,50

97,50

99,30

ALUMINIUM SYSTEMS FOR SLIDING DOORS

Page 103 >>> CATALOGUE REFERENCE PAGE 510/514 >>>

400 SERIES LOCKS AND LATCHES FOR SLIDING DOORS

CHN28/1 400 series lock with lock / knob Chrome 1 Pc

CHN28/24 400 series lock with lock / knob Brushed steel-effect 1 Pc

CHN28/45 400 series lock with lock / knob Matt aluminium effect 1 Pc

CHN31/1 400 series lock, lock / knob with handle Chrome 1 Pc

CHN31/24 400 series lock, lock / knob with handle Brushed steel-effect 1 Pc

CHN31/45 400 series lock, lock / knob with handle Matt aluminium effect 1 Pc

CLH12/1 400 series lock double knob for sliding doors Chrome 1 Pc

CLH12/24 400 series lock double knob for sliding doors Brushed steel-effect 1 Pc

CLH12/45 400 series lock double knob for sliding doors Matt aluminium effect 1 Pc

CLHM14/1 400 series lock double knob for sliding doors with handle Chrome 1 Pc

CLHM14/24 400 series lock double knob for sliding doors with handle Brushed steel-effect 1 Pc

CLHM14/45 400 series lock double knob for sliding doors with handle Matt aluminium effect 1 Pc

CLS10/1 400 series vacant engaged latch for sliding doors Chrome 1 Pc

CLS10/24 400 series vacant engaged latch for sliding doors Brushed steel-effect 1 Pc

CLS10/45 400 series vacant engaged latch for sliding doors Matt aluminium effect 1 Pc

CLM11/1 400 series vacant engaged latch for sliding doors with handle Chrome 1 Pc

CLM11/24 400 series vacant engaged latch for sliding doors with handle Brushed steel-effect 1 Pc

CLM11/45 400 series vacant engaged latch for sliding doors with handle Matt aluminium effect 1 Pc

CL95/1 Keeper side plate 90 x 55mm for double door Chrome 1 Pc

CL95/24 Keeper side plate 90 x 55mm for double door Brushed steel-effect 1 Pc

CL95/45 Keeper side plate 90 x 55mm for double door Matt aluminium effect 1 Pc

LMCH Special adjustment wrench for LM sliding doors equipped with dragging system 1 Pc

SERSD915S/15 SD 900 lock with dragging handle, Lock + lock Polished steel 1 Pc

SERSD915S/8 SD 900 lock with dragging handle, Lock + lock Brushed steel 1 Pc

SERSD915SU/15 SD 900 lock with dragging handle, Lock + lock, single key Polished steel 1 Pc

SERSD915SU/8 SD 900 lock with dragging handle, Lock + lock, single key Brushed steel 1 Pc

SERSD915P/15 SD 900 lock with dragging handle, Knob + lock Polished steel 1 Pc

SERSD915P/8 SD 900 lock with dragging handle, Knob + lock Brushed steel 1 Pc

SERSD941/15 Striking plate for SD 900 lock Polished steel 1 Pc

SERSD941/8 Striking plate for SD 900 lock Brushed steel 1 Pc

Art. Description Finish Q.ty EURO

98,14

99,82

104,59

136,62

135,86

144,29

82,53

84,15

91,56

113,20

115,42

126,91

79,40

82,67

84,86

107,06

109,16

120,53

45,72

46,62

53,89

11,86

135,72

135,72

130,02

130,02

128,88

128,88

47,90

47,90

057,3080,001 Protection profile to be applied to the edge of the glass. 10 m pack Transparent 1 Pack

057,3080,002 Protection profile to be applied to the edge of the glass. 10 m pack Black 1 Pack

057,3099,071 Accessory for cleaning the track sliding grooves 1 Pc

057,3114,071 Carriage with M8 screw and nut White 1 Pc

057,3073,071 Plastic door stop and damper White 1 Pc

057,3073,072 Plastic door stop with tension adjustment White 1 Pc

057,3030,071/97 Lower adjustable floor guide 6/12.7mm Matt aluminium 1 Pc

057,3030,071/91 Lower adjustable floor guide 6/12.7mm Polished aluminium 1 Pc

057,3030,071/88 Lower adjustable floor guide 6/12.7mm Brushed steel-effect aluminium 1 Pc

LMGF/97 LMGF floor guide Matt aluminium 1 Pc

LMGF/91 LMGF floor guide Polished aluminium 1 Pc

LMGF/88 LMGF floor guide Brushed steel-effect aluminium 1 Pc

HW,18619 Wall mounted door stop with glass door centring White 1 Pc

057,3099,071/97 Stop low Matt aluminium 1 Pc

GLASS SEALING SYSTEM

GSB12 Glass bumper adhesive gasket, with 3M high airtightness VHB bi-adhesive, Transparent 1 Pack

for glass panes from 8mm to 13.52mm, 12 metre pack

GSB831 Centring template for glass bumper adhesive gasket, Orange 1 Pc

for glass panes from 8mm to 13.52mm

GSLSVL Single use degreasing wipe impregnated with isopropyl alcohol 1 Pc

●GSLS217 Glass lip slide adhesive gasket L=3000mm with VHB bi-adhesive Transparent 1 Pc

3M high airtightness, for glass panes from 8mm to 13.52mm

ALUMINIUM SYSTEMS FOR SLIDING DOORS

Page 104

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 515/521 >>>

377,77

377,77

10,26

36,16

8,98

13,23

50,73

50,73

50,73

20,53

20,53

20,53

47,90

65,23

248,79

10,67

2,19

54,29

SYSTEMS FOR HINGED DOORS

Page 105 >>> CATALOGUE REFERENCE PAGE 526/539 >>>

HINGES FOR PIVOT DOORS HS1010

HS1010PS/9 HS1010 lower hinge with countersunk connector Machined steel (CNC) 1 Pc

HS1010PB/9 HS1010 lower hinge with stud Machined steel (CNC) 1 Pc

HS1010SS/9 HS1010 upper hinge with countersunk connector Machined steel (CNC) 1 Pc

HS1010SB/9 HS1010 upper hinge with stud Machined steel (CNC) 1 Pc

HS1010SPL/9 Upper pit Machined steel (CNC) 1 Pc

HINGES FOR PIVOT DOORS HS66

HS66100/9 Upper hinge kit HS66 Machined steel (CNC) 1 Kit

HS66200/9 HS66 fanlight hinge kit Machined steel (CNC) 1 Kit

HS66SUP/9 Upper hinge with cylindrical holes for glass door Machined steel (CNC) 1 Pc

for thicknesses from 8 to 6+6+1.52mm

HS66INF/9 Lower hinge with cylindrical holes for glass door Machined steel (CNC) 1 Pc

for thicknesses from 8 to 6+6+1.52mm

HS66POZSL Upper pit for fanlight 1 Pc

HS66SAFE "Safe seat" upper safety pin 1 Pc

HS66POZ/8 Upper pit for ceiling anchoring Brushed steel 1 Pc

HD+3303/1 Floor pin HD+3303 Polished chrome 1 Pc

HD+3303/3 Floor pin HD+3303 Brushed nickel 1 Pc

HINGES FOR HIGH THICKNESS

CGS1620DX/15 Lower right hinge for high thickness Polished steel 1 Pc

CGS1620DX/8 Lower right hinge for high thickness Brushed steel 1 Pc

CGS1620SX/15 Lower left hinge for high thickness Polished steel 1 Pc

CGS1620SX/8 Lower left hinge for high thickness Brushed steel 1 Pc

CGS1640DX/15 Upper right hinge for high thickness Polished steel 1 Pc

CGS1640DX/8 Upper right hinge for high thickness Brushed steel 1 Pc

CGS1640SX/15 Upper left hinge for high thickness Polished steel 1 Pc

CGS1640SX/8 Upper left hinge for high thickness Brushed steel 1 Pc

HS1010SPL/9 Upper pit Machined steel (CNC) 1 Pc

Art. Description Finish Q.ty EURO

294,78

307,27

294,78

307,27

35,00

169,93

303,42

138,00

147,69

9,18

18,25

13,69

18,20

18,20

231,08

231,08

231,08

231,08

232,71

232,71

232,71

232,71

35,00

LOCKS FOR HIGH THICKNESS

SGS2115U/1 SGS21 single key lock for high thickness, glass 15mm Chrome 1 Pc

SGS2115U/24 SGS21 single key lock for high thickness, glass 15mm Stainless steel effect 1 Pc

SGS2115D/1 SGS21 different key lock for high thickness, glass 15mm Chrome 1 Pc

SGS2115D/24 SGS21 different key lock for high thickness, glass 15mm Stainless steel effect 1 Pc

SGS2117U/1 SGS21 single key lock for high thickness, glass 17.52mm Chrome 1 Pc

SGS2117U/24 SGS21 single key lock for high thickness, glass 17.52mm Stainless steel effect 1 Pc

SGS2117D/1 SGS21 different key lock for high thickness, glass 17.52mm Chrome 1 Pc

SGS2117D/24 SGS21 different key lock for high thickness, glass 17.52mm Stainless steel effect 1 Pc

SGS2121U/1 SGS21 single key lock for high thickness, glass 21.52mm Chrome 1 Pc

SGS2121U/24 SGS21 single key lock for high thickness, glass 21.52mm Stainless steel effect 1 Pc

SGS2121D/1 SGS21 different key lock for high thickness, glass 21.52mm Chrome 1 Pc

SGS2121D/24 SGS21 different key lock for high thickness, glass 21.52mm Stainless steel effect 1 Pc

SGS2315MU/1 SGS23M single key lock for high thickness with handle, glass 15mm Chrome 1 Pc

SGS2315MU/24 SGS23M single key lock for high thickness with handle, glass 15mm Stainless steel effect 1 Pc

SGS2315MD/1 SGS23M different key lock for high thickness with handle, glass 15mm Chrome 1 Pc

SGS2315MD/24 SGS23M different key lock for high thickness with handle, glass 15mm Stainless steel effect 1 Pc

SGS2317MU/1 SGS23M single key lock for high thickness with handle, glass 17.52mm Chrome 1 Pc

SGS2317MU/24 SGS23M single key lock for high thickness with handle, glass 17.52mm Stainless steel effect 1 Pc

SGS2317MD/1 SGS23M different key lock for high thickness with handle, glass 17.52mm Chrome 1 Pc

SGS2317MD/24 SGS23M different key lock for high thickness with handle, glass 17.52mm Stainless steel effect 1 Pc

SGS2321MU/1 SGS23M single key lock for high thickness with handle, glass 21.52mm Chrome 1 Pc

SGS2321MU/24 SGS23M single key lock for high thickness with handle, glass 21.52mm Stainless steel effect 1 Pc

SGS2321MD/1 SGS23M different key lock for high thickness with handle, glass 21.52mm Chrome 1 Pc

SGS2321MD/24 SGS23M different key lock for high thickness with handle, glass 21.52mm Stainless steel effect 1 Pc

SGS2715M/1 SGS27 counterlock for high thickness, glass 15mm Chrome 1 Pc

SGS2715M/24 SGS27 counterlock for high thickness, glass 15mm Stainless steel effect 1 Pc

SGS2717M/1 SGS27 counterlock for high thickness, glass 17.52mm Chrome 1 Pc

SGS2717M/24 SGS27 counterlock for high thickness, glass 17.52mm Stainless steel effect 1 Pc

SGS2721M/1 SGS27 counterlock for high thickness, glass 21.52mm Chrome 1 Pc

SGS2721M/24 SGS27 counterlock for high thickness, glass 21.52mm Stainless steel effect 1 Pc

SGS15L/1 L shaped wall plate for 15 mm th.glass Chrome 1 Pc

SGS15L/24 L shaped wall plate for 15 mm th.glass Stainless steel effect 1 Pc

SGS17L/1 L shaped wall plate for 17 mm th.glass Chrome 1 Pc

SGS17L/24 L shaped wall plate for 17 mm th.glass Stainless steel effect 1 Pc

SGS21L/1 L shaped wall plate for 21 mm th.glass Chrome 1 Pc

SGS21L/24 L shaped wall plate for 21 mm th.glass Stainless steel effect 1 Pc

REVOLVER HINGES FOR PIVOT DOORS

REV140BDX/9 Revolver CB upper right Machined steel (CNC) 1 Pc

REV140BSX/9 Revolver CB upper left Machined steel (CNC) 1 Pc

REV160BDX/9 Revolver CB lower right Machined steel (CNC) 1 Pc

REV160BSX/9 Revolver CB lower left Machined steel (CNC) 1 Pc

HS1010SPL/9 Upper pit Machined steel (CNC) 1 Pc

PIVOTS014/8 Floor pin Brushed steel 1 Pc

SYSTEMS FOR HINGED DOORS

Page 106

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 541/545 >>>

166,56

178,54

166,21

178,57

166,56

178,54

166,21

178,57

166,56

178,54

166,21

178,57

227,07

227,76

226,73

227,30

227,07

227,76

226,73

227,30

227,07

227,76

226,73

227,30

111,20

111,20

111,20

111,20

111,20

111,20

8,74

8,74

8,74

8,74

8,74

8,74

191,10

191,10

192,22

192,22

35,00

40,80

SYSTEMS FOR HINGED DOORS

Page 107 >>> CATALOGUE REFERENCE PAGE 547/554 >>>

HINGES FOR PIVOT DOORS

PIVOTS001/9 Lower pivot for countersunk holes Machined steel (CNC) 1 Pc

PIVOTB002/9 Lower pivot for cylindrical holes Machined steel (CNC) 1 Pc

PIVOTS003/9 Upper pivot for countersunk holes Machined steel (CNC) 1 Pc

PIVOTB004/9 Upper pivot for cylindrical holes Machined steel (CNC) 1 Pc

PIVOTS005/9 Upper pivot fanlight fitting for countersunk holes Machined steel (CNC) 1 Pc

PIVOTB006/9 Upper pivot fanlight fitting for cylindrical holes Machined steel (CNC) 1 Pc

PIVOTS007/9 Upper pivot fanlight fitting with bracket for countersunk holes Machined steel (CNC) 1 Pc

PIVOTB008/9 Upper pivot fanlight fitting with bracket for cylindrical holes Machined steel (CNC) 1 Pc

PIVOTS009/9 Bracket with connectors for countersunk holes Machined steel (CNC) 1 Pc

PIVOTB010/9 Bracket with connectors for cylindrical holes Machined steel (CNC) 1 Pc

PIVOTS011/9 Eccentric upper pit Machined steel (CNC) 1 Pc

PIVOTS014/8 Floor pin Brushed steel 1 Pc

LT LOCK

GL10/15 LT500 lock Polished steel 1 Pc

GL10/8 LT500 lock Brushed steel 1 Pc

GL25/15 LT501 counterlock Polished steel 1 Pc

GL25/8 LT501 counterlock Brushed steel 1 Pc

HD SQUARE +33

HD+3301/1 Upper hinge HD+3301 for standard cut-out LM101 with adjustable slider Chrome 1 Pc

HD+3301/24 Upper hinge HD+3301 for standard cut-out LM101 with adjustable slider Brushed steel effect 1 Pc

HD+3302F/1 Lower hinge HD+3302 for standard cut-out LM101 and seat for French pin Chrome 1 Pc

HD+3302F/24 Lower hinge HD+3302 for standard cut-out LM101 and seat for French pin Brushed steel effect 1 Pc

HD+3302D/1 Lower hinge HD+3302 for standard cut-out LM101 and seat for German pin Chrome 1 Pc

HD+3302D/24 Lower hinge HD+3302 for standard cut-out LM101 and seat for German pin Brushed steel effect 1 Pc

Art. Description Finish Q.ty EURO

220,42

246,39

220,42

239,50

176,44

149,95

315,27

263,34

181,74

189,16

43,98

40,80

120,89

120,89

37,65

37,65

64,66

64,66

59,40

59,40

59,40

59,40

HD+3307DX/1 Right fanlight hinge, L-shaped HD+3307 Chrome 1 Pc

HD+3307DX/24 Right fanlight hinge, L-shaped HD+3307 Brushed steel effect 1 Pc

HD+3307SX/1 Left fanlight hinge, L-shaped HD+3307 Chrome 1 Pc

HD+3307SX/24 Left fanlight hinge, L-shaped HD+3307 Brushed steel effect 1 Pc

HD+3308DX/1 Right wall fitting fanlight hinge Chrome 1 Pc

HD+3308DX/24 Right wall fitting fanlight hinge Brushed steel effect 1 Pc

HD+3308SX/1 Left wall fitting fanlight hinge Chrome 1 Pc

HD+3308SX/24 Left wall fitting fanlight hinge Brushed steel effect 1 Pc

HD+3305U/1 Series HD+3305 lock with standard cut-out LM61, single key Polished chrome 1 Pc

HD+3305U/24 Series HD+3305 lock with standard cut-out LM61, single key Brushed steel effect 1 Pc

HD+3305D/1 Series HD+3305 lock with standard cut-out LM61, different key Polished chrome 1 Pc

HD+3305D/24 Series HD+3305 lock with standard cut-out LM61, different key Brushed steel effect 1 Pc

HD+3305P/1 Series HD+3305 lock with standard cut-out LM61, knob key Polished chrome 1 Pc

HD+3305P/24 Series HD+3305 lock with standard cut-out LM61, knob key Brushed steel effect 1 Pc

HD+3309/1 Striking plate for single bolt Chrome 1 Pc

HD+3309/24 Striking plate for single bolt Brushed steel effect 1 Pc

HD+3310/1 Striking plate for double bolt Chrome 1 Pc

HD+3310/24 Striking plate for double bolt Brushed steel effect 1 Pc

DQC63/1 HD SQUARE series bolt for 10/12 mm glass panes Chrome 1 Pc

DQC63/24 HD SQUARE series bolt for 10/12 mm glass panes Stainless steel effect 1 Pc

DQC65/1 Keeper side plate for HD SQUARE series bolt for 10/12 mm glass panes Chrome 1 Pc

DQC65/24 Keeper side plate for HD SQUARE series bolt for 10/12 mm glass panes Stainless steel effect 1 Pc

HD+3306/9 Wall seat for HD+3305 lock Machined steel (CNC) 1 Pc

HD+3303/1 Floor pin HD+3303 Polished chrome 1 Pc

HD+3303/3 Floor pin HD+3303 Brushed nickel 1 Pc

HD+3304/1 Seat for ceiling pin HD+3304 Polished chrome 1 Pc

HD+3304/3 Seat for ceiling pin HD+3304 Brushed nickel 1 Pc

GL7311/1 Anti-dust pit to be connected to item HD+3305 Polished chrome 1 Pc

GL7311/3 Anti-dust pit to be connected to item HD+3305 Brushed nickel 1 Pc

S1217U/1 Cylinder with rotary knob Chrome 1 Pc

S1217U/3 Cylinder with rotary knob Brushed nickel 1 Pc

LOGS10U/1 European profile closing cylinder single key Chrome 1 Pc

LOGS10U/3 European profile closing cylinder single key Brushed nickel 1 Pc

LOGS10D/1 European profile closing cylinder different key Chrome 1 Pc

LOGS10D/3 European profile closing cylinder different key Brushed nickel 1 Pc

SYSTEMS FOR HINGED DOORS

Page 108

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 555/561 >>>

180,85

180,85

180,85

180,85

136,01

136,01

136,01

136,01

150,41

158,11

150,05

157,64

153,41

160,63

67,76

67,76

114,56

114,56

81,90

81,90

60,45

60,45

5,75

18,20

18,20

10,54

10,54

14,04

14,28

30,11

30,11

24,40

25,05

24,08

24,62

SYSTEMS FOR HINGED DOORS

Page 109 >>> CATALOGUE REFERENCE PAGE 564/566 >>>

GLASS FITTING

GF100/15 GF100 lower hinge with German fitting AISI 316 steel covers Polished steel 1 Pc

GF100/8 GF100 lower hinge with German fitting AISI 316 steel covers Brushed steel 1 Pc

GF100/22 GF100 lower hinge with German fitting AISI 316 steel covers PVD gold 1 Pc

GF100/4 GF100 lower hinge with German fitting brass covers Bronze 1 Pc

GF200/15 GF200 upper hinge AISI 316 steel covers Polished steel 1 Pc

GF200/8 GF200 upper hinge AISI 316 steel covers Brushed steel 1 Pc

GF200/22 GF200 upper hinge AISI 316 steel covers PVD gold 1 Pc

GF200/4 GF200 upper hinge brass covers Bronze 1 Pc

GF400/15 GF400 fanlight hinge AISI 316 steel covers Polished steel 1 Pc

GF400/8 GF400 fanlight hinge AISI 316 steel covers Brushed steel 1 Pc

GF400/22 GF400 fanlight hinge AISI 316 steel covers PVD gold 1 Pc

GF400/4 GF400 fanlight hinge brass covers Bronze 1 Pc

GL7200 200 door stop Black 1 Pc

GF210/15 GF210 wall mount hinge AISI 316 steel covers Polished steel 1 Pc

GF210/8 GF210 wall mount hinge AISI 316 steel covers Brushed steel 1 Pc

GF210/22 GF210 wall mount hinge AISI 316 steel covers PVD gold 1 Pc

GF210/4 GF210 wall mount hinge brass covers Bronze 1 Pc

GL200S/15 GL200 lock AISI 316 steel covers lock + different key lock Polished steel 1 Pc

GL200S/8 GL200 lock AISI 316 steel covers lock + different key lock Brushed steel 1 Pc

GL200S/22 GL200 lock AISI 316 steel covers lock + different key lock PVD gold 1 Pc

GL200S/4 GL200 lock brass covers lock + different key lock Bronze 1 Pc

GL200SU/15 GL200 lock AISI 316 steel covers lock + single key lock Polished steel 1 Pc

GL200SU/8 GL200 lock AISI 316 steel covers lock + single key lock Brushed steel 1 Pc

GL200SU/22 GL200 lock AISI 316 steel covers lock + single key lock PVD gold 1 Pc

GL200SU/4 GL200 lock brass covers lock + single key lock Bronze 1 Pc

GL200P/15 GL200 lock AISI 316 steel covers knob + single key lock Polished steel 1 Pc

GL200P/8 GL200 lock AISI 316 steel covers knob + single key lock Brushed steel 1 Pc

GL200P/22 GL200 lock AISI 316 steel covers knob + single key lock PVD gold 1 Pc

GL200P/4 GL200 lock AISI 316 steel covers knob + single key lock Bronze 1 Pc

GK200/15 GK200 counterlock AISI 316 steel covers Polished steel 1 Pc

GK200/8 GK200 counterlock AISI 316 steel covers Brushed steel 1 Pc

GK200/22 GK200 counterlock AISI 316 steel covers PVD gold 1 Pc

GK200/4 GK200 counterlock brass covers Bronze 1 Pc

GK300/15 GK300 double door counterlock AISI 316 steel covers Polished steel 1 Pc

GK300/8 GK300 double door counterlock AISI 316 steel covers Brushed steel 1 Pc

GK300/22 GK300 double door counterlock AISI 316 steel covers PVD gold 1 Pc

GK300/4 GK300 double door counterlock brass covers Bronze 1 Pc

GF600/15 GF600 fitting accessory for fanlight AISI 316 steel covers Polished steel 1 Pc

GF600/8 GF600 fitting accessory for fanlight AISI 316 steel covers Brushed steel 1 Pc

GF600/22 GF600 fitting accessory for fanlight AISI 316 steel covers PVD gold 1 Pc

GF600/4 GF600 fitting accessory for fanlight brass covers Bronze 1 Pc

Art. Description Finish Q.ty EURO

48,26

48,75

61,79

76,16

48,26

48,75

61,79

76,16

72,63

74,10

92,33

117,97

6,84

59,40

59,40

77,02

91,01

143,80

143,80

167,20

182,50

143,80

143,80

167,20

181,83

140,88

142,59

164,28

178,90

50,70

50,21

67,27

98,67

178,90

178,90

280,30

278,35

70,41

70,41

85,80

107,24

GL7100 100 door stop Black 1 Pc

GF700/15 GF700 fitting accessory for overpanel AISI 316 steel covers Polished steel 1 Pc

GF700/8 GF700 fitting accessory for overpanel AISI 316 steel covers Brushed steel 1 Pc

GF700/22 GF700 fitting accessory for overpanel AISI 316 steel covers PVD gold 1 Pc

GF700/4 GF700 overpanel fitting accessory brass covers Bronze 1 Pc

GL7100 100 door stop Black 1 Pc

GF150/15 GF150 clamp for fixed glass AISI 316 steel covers Polished steel 1 Pc

GF150/8 GF150 clamp for fixed glass AISI 316 steel covers Brushed steel 1 Pc

GF150/22 GF150 clamp for fixed glass AISI 316 steel covers PVD gold 1 Pc

GF150/4 GF150 clamp for fixed glass brass covers Bronze 1 Pc

GF150F/15 GF150 clamp for fixed glass with stop AISI 316 steel covers Polished steel 1 Pc

GF150F/8 GF150 clamp for fixed glass with stop AISI 316 steel covers Brushed steel 1 Pc

GF150F/22 GF150 clamp for fixed glass with stop AISI 316 steel covers PVD gold 1 Pc

GF150F/4 GF150 clamp for fixed glass with stop brass covers Bronze 1 Pc

GF710/15 GF710 fitting accessory AISI 316 steel covers Polished steel 1 Pc

GF710/8 GF710 fitting accessory AISI 316 steel covers Brushed steel 1 Pc

GF710/22 GF710 fitting accessory AISI 316 steel covers PVD gold 1 Pc

GF710/4 GF710 fitting accessory brass covers Bronze 1 Pc

GF810/15 GF810 fitting accessory AISI 316 steel covers Polished steel 1 Pc

GF810/8 GF810 fitting accessory AISI 316 steel covers Brushed steel 1 Pc

GF810/22 GF810 fitting accessory AISI 316 steel covers PVD gold 1 Pc

GF810/4 GF810 fitting accessory brass covers Bronze 1 Pc

GF800/15 GF800 fitting accessory for 4 glass panes AISI 316 steel covers Polished steel 1 Pc

GF800/8 GF800 fitting accessory for 4 glass panes AISI 316 steel covers Brushed steel 1 Pc

GF800/22 GF800 fitting accessory for 4 glass panes AISI 316 steel covers PVD gold 1 Pc

GF800/4 GF800 fitting accessory for 4 glass panes brass covers Bronze 1 Pc

GF410L/15 GF410-L left support AISI 316 steel covers Polished steel 1 Pc

GF410L/8 GF410-L left support AISI 316 steel covers Brushed steel 1 Pc

GF410L/22 GF410-L left support AISI 316 steel covers PVD gold 1 Pc

GF410L/4 GF410-L left support brass covers Bronze 1 Pc

GL7200 200 door stop Black 1 Pc

GF410R/15 GF410-R right support AISI 316 steel covers Polished steel 1 Pc

GF410R/8 GF410-R right support AISI 316 steel covers Brushed steel 1 Pc

GF410R/22 GF410-R right support AISI 316 steel covers PVD gold 1 Pc

GF410R/4 GF410-R right support brass covers Bronze 1 Pc

GL7200 200 door stop Black 1 Pc

GF510/15 GF510 two door support with bracing AISI 316 steel covers Polished steel 1 Pc

GF510/8 GF510 two door support with bracing AISI 316 steel covers Brushed steel 1 Pc

GF510/22 GF510 two door support with bracing AISI 316 steel covers PVD gold 1 Pc

GF510/4 GF510 support for two doors with bracing brass covers Bronze 1 Pc

SYSTEMS FOR HINGED DOORS

Page 110

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 566/569 >>>

3,42

42,90

42,90

57,03

65,32

3,42

41,92

41,92

56,55

56,55

41,92

41,92

55,08

63,86

86,28

86,28

114,56

127,72

120,41

120,41

148,68

171,59

63,37

63,37

77,51

96,52

166,23

166,23

218,88

285,17

6,84

166,23

166,23

218,88

285,17

6,84

176,95

176,95

250,07

325,15

SYSTEMS FOR HINGED DOORS

Page 111 >>> CATALOGUE REFERENCE PAGE 569/572 >>>

GL800/15 GL800 bolt AISI 316 steel covers Polished steel 1 Pc

GL800/8 GL800 bolt AISI 316 steel covers Brushed steel 1 Pc

GL800/22 GL800 bolt AISI 316 steel covers PVD gold 1 Pc

GL800/4 GL800 bolt brass covers Bronze 1 Pc

GK800/15 GK800 bolt striking plate AISI 316 steel covers Polished steel 1 Pc

GK800/8 GK800 bolt striking plate AISI 316 steel covers Brushed steel 1 Pc

GK800/22 GK800 bolt striking plate AISI 316 steel covers PVD gold 1 Pc

GK800/4 GK800 bolt striking plate brass covers Bronze 1 Pc

GL7100 100 door stop Black 1 Pc

GL7200 200 door stop Black 1 Pc

GL7300/1 Anti-dust pit Chrome 1 Pc

GL7300/3 Anti-dust pit Brushed nickel 1 Pc

GL7311/1 Anti-dust pit to be connected to item HD+3305 Polished chrome 1 Pc

GL7311/3 Anti-dust pit to be connected to item HD+3305 Brushed nickel 1 Pc

GL8806STPDX/9 Square fitting insert for ceiling connection Machined steel (CNC) 1 Pc

GL7439/9 Insert for Italian fitting to be matched with GF100 Machined steel (CNC) 1 Pc

GL7433/9 Insert for French fitting to be matched with GF100 Machined steel (CNC) 1 Pc

GARDAML/1 Italian fitting ML floor pin Chrome 1 Pc

GARDAML/3 Italian fitting ML floor pin Brushed nickel 1 Pc

GARDATD/1 German fitting ML floor pin Polished chrome 1 Pc

GARDATD/3 German fitting ML floor pin Brushed nickel 1 Pc

HD+3303/1 Floor pin HD+3303 Polished chrome 1 Pc

HD+3303/3 Floor pin HD+3303 Brushed nickel 1 Pc

PIVOTS014/8 Floor pin Brushed steel 1 Pc

GL8819 Ceiling pin 8819 1 Pc

GL8815/9 Upper plate 8815 Machined steel (CNC) 1 Pc

GL8823/15 GL8823 floor housing Polished steel 1 Pc

GL8823/8 GL8823 floor housing Brushed steel 1 Pc

GL8824/9 GL8824 wall housing Machined steel (CNC) 1 Pc

Art. Description Finish Q.ty EURO34,12

34,12

55,08

67,27

23,64

23,64

38,02

45,34

3,42

6,84

16,50

19,39

14,04

14,28

22,03

13,64

13,64

29,20

31,48

29,20

31,48

18,20

18,20

40,80

10,60

9,92

4,93

5,25

4,88

SEVAX+ FLOOR MOUNTED DOOR CLOSER

SX-JS903PMRFR/15 Sevax JANUS+ with French pin, force EN3PMR (27 Nm), with 90° stop Polished steel 1 Pc

SX-JS903PMRFR/8 Sevax JANUS+ with French pin, force EN3PMR (27 Nm), with 90° stop Brushed steel 1 Pc

SX-JS903PMRDE/15 Sevax JANUS+ with German pin, force EN3PMR (27 Nm), with 90° stop Polished steel 1 Pc

SX-JS903PMRDE/8 Sevax JANUS+ with German pin, force EN3PMR (27 Nm), with 90° stop Brushed steel 1 Pc

SX-JS903PMRIT/15 Sevax JANUS+ with Italian pin, force EN3PMR (27 Nm), with 90° stop Polished steel 1 Pc

SX-JS903PMRIT/8 Sevax JANUS+ with Italian pin, force EN3PMR (27 Nm), with 90° stop Brushed steel 1 Pc

SX-JS903FR/15 Sevax JANUS+ with French pin, force EN3 (33 Nm), with 90° stop Polished steel 1 Pc

SX-JS903FR/8 Sevax JANUS+ with French pin, force EN3 (33 Nm), with 90° stop Brushed steel 1 Pc

SX-JS903DE/15 Sevax JANUS+ with German pin, force EN3 (33 Nm), with 90° stop Polished steel 1 Pc

SX-JS903DE/8 Sevax JANUS+ with German pin, force EN3 (33 Nm), with 90° stop Brushed steel 1 Pc

SX-JS903IT/15 Sevax JANUS+ with Italian pin, force EN3 (33 Nm), with 90° stop Polished steel 1 Pc

SX-JS903IT/8 Sevax JANUS+ with Italian pin, force EN3 (33 Nm), with 90° stop Brushed steel 1 Pc

SX-JS904FR/15 Sevax JANUS+ with French pin, force EN4 (47 Nm), with 90° stop Polished steel 1 Pc

SX-JS904FR/8 Sevax JANUS+ with French pin, force EN4 (47 Nm), with 90° stop Brushed steel 1 Pc

SX-JS904DE/15 Sevax JANUS+ with German pin, force EN4 (47 Nm), with 90° stop Polished steel 1 Pc

SX-JS904DE/8 Sevax JANUS+ with German pin, force EN4 (47 Nm), with 90° stop Brushed steel 1 Pc

SX-JS904IT/15 Sevax JANUS+ with Italian pin, force EN4 (47 Nm), with 90° stop Polished steel 1 Pc

SX-JS904IT/8 Sevax JANUS+ with Italian pin, force EN4 (47 Nm), with 90° stop Brushed steel 1 Pc

SX-JS905FR/15 Sevax JANUS+ with French pin, force EN5 (56 Nm), with 90° stop Polished steel 1 Pc

SX-JS905FR/8 Sevax JANUS+ with French pin, force EN5 (56 Nm), with 90° stop Brushed steel 1 Pc

SX-JS905DE/15 Sevax JANUS+ with German pin, force EN5 (56 Nm), with 90° stop Polished steel 1 Pc

SX-JS905DE/8 Sevax JANUS+ with German pin, force EN5 (56 Nm), with 90° stop Brushed steel 1 Pc

SX-JS905IT/15 Sevax JANUS+ with Italian pin, force EN5 (56 Nm), with 90° stop Polished steel 1 Pc

SX-JS905IT/8 Sevax JANUS+ with Italian pin, force EN5 (56 Nm), with 90° stop Brushed steel 1 Pc

* SX-JS1053FR/15 Sevax JANUS+ with French pin, force EN3 (33 Nm), with 105° stop Polished steel 1 Pc

* SX-JS1053FR/8 Sevax JANUS+ with French pin, force EN3 (33 Nm), with 105° stop Brushed steel 1 Pc

* SX-JS1053DE/15 Sevax JANUS+ with German pin, force EN3 (33 Nm), with 105° stop Polished steel 1 Pc

* SX-JS1053DE/8 Sevax JANUS+ with German pin, force EN3 (33 Nm), with 105° stop Brushed steel 1 Pc

* SX-JS1053IT/15 Sevax JANUS+ with Italian pin, force EN3 (33 Nm), with 105° stop Polished steel 1 Pc

* SX-JS1053IT/8 Sevax JANUS+ with Italian pin, force EN3 (33 Nm), with 105° stop Brushed steel 1 Pc

* SX-JS1054FR/15 Sevax JANUS+ with French pin, force EN4 (47 Nm), with 105° stop Polished steel 1 Pc

* SX-JS1054FR/8 Sevax JANUS+ with French pin, force EN4 (47 Nm), with 105° stop Brushed steel 1 Pc

* SX-JS1054DE/15 Sevax JANUS+ with German pin, force EN4 (47 Nm), with 105° stop Polished steel 1 Pc

* SX-JS1054DE/8 Sevax JANUS+ with German pin, force EN4 (47 Nm), with 105° stop Brushed steel 1 Pc

* SX-JS1054IT/15 Sevax JANUS+ with Italian pin, force EN4 (47 Nm), with 105° stop Polished steel 1 Pc

* SX-JS1054IT/8 Sevax JANUS+ with Italian pin, force EN4 (47 Nm), with 105° stop Brushed steel 1 Pc

MINOS+ FLOOR MOUNTED DOOR CLOSER

SX-MS903FR/15 Sevax MINOS+ with French pin, force EN3 (28 Nm), with 90° stop Polished steel 1 Pc

SX-MS903FR/8 Sevax MINOS+ with French pin, force EN3 (28 Nm), with 90° stop Brushed steel 1 Pc

SX-MS903DE/15 Sevax MINOS+ with German pin, force EN3 (28 Nm), with 90° stop Polished steel 1 Pc

SX-MS903DE/8 Sevax MINOS+ with German pin, force EN3 (28 Nm), with 90° stop Brushed steel 1 Pc

SX-MS904FR/15 Sevax MINOS+ with French pin, force EN4 (49 Nm), with 90° stop Polished steel 1 Pc

SX-MS904FR/8 Sevax MINOS+ with French pin, force EN4 (49 Nm), with 90° stop Brushed steel 1 Pc

SX-MS904DE/15 Sevax MINOS+ with German pin, force EN4 (49 Nm), with 90° stop Polished steel 1 Pc

SX-MS904DE/8 Sevax MINOS+ with German pin, force EN4 (49 Nm), with 90° stop Brushed steel 1 Pc

SYSTEMS FOR HINGED DOORS

Page 112

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 577/578 >>>

* Item available while stocks last

383,20

383,20

383,20

383,20

383,20

383,20

383,20

383,20

383,20

383,20

383,20

383,20

411,94

411,94

411,94

411,94

411,94

411,94

454,32

454,32

454,32

454,32

454,32

454,32

411,72

411,72

411,72

411,72

411,72

411,72

441,70

441,70

441,70

441,70

441,70

441,70

294,12

294,12

294,12

294,12

304,62

304,62

304,62

304,62

SYSTEMS FOR HINGED DOORS

Page 113 >>> CATALOGUE REFERENCE PAGE 579/585 >>>

* SX-PI01 Lower hinge for wood/metal doors for German pin 1 Pc

* SX-PI03 Lower hinge for wood/metal doors for French pin 1 Pc

* Item available while stocks last

SX-PI05 Lower hinge with off-centre axis for wood/metal doors for German pin 1 Pc

SX-PS01 Adjustable upper hinge for wood/metal doors 1 Pc

SEVAX CEILING DOOR CLOSER

SX-JL903PMR Sevax JANUS ceiling mount, force EN3PMR (27 Nm), with 90° stop 1 Pc

SX-JL903 Sevax JANUS ceiling mount, force EN3 (33 Nm), with 90° stop 1 Pc

SX-JL904 Sevax JANUS ceiling mount, force EN4 (47 Nm), with 90° stop 1 Pc

SX-JL905 Sevax JANUS ceiling mount, force EN5 (56 Nm), with 90° stop 1 Pc

SX-JLCER1 Upper hinge with side opening 1 Pc

SX-JLCER3 Upper hinge with rear opening 1 Pc

SX-JLCER5 Anchoring pin and bracket 1 Pc

GEZE FLOOR MOUNTED DOOR CLOSER

GZ-TS500NV90 Floor mounted door closer for 90° hinged and swing doors Brushed steel 1 Pc

GZ-TS500NV110 Floor mounted door closer for 110 hinged and swing doors Brushed steel 1 Pc

GZ-TSADT Adapter 1 Pc

GZ-TS550NV Floor mounted door closer for hinged and swing doors Brushed steel 1 Pc

with pin adjustable between 80° and 165° enable/disable

GZ-TS3000V Overhead door closer Anodised aluminium 1 Pc

GZ-TS071924 Mechanical stop, optional 1 Pc

Art. Description Finish Q.ty EURO29,89

29,89

98,67

72,00

737,13

737,13

782,42

846,90

149,21

133,78

146,76

313,19

313,19

45,66

867,37

539,62

43,38

LM60 FLOOR MOUNTED DOOR CLOSER

LM609020 LM60 door closer medium force (20 Nm) for doors up to 900 mm-90 ° stop 1 Pc

LM609025 LM60 door closer medium force (25 Nm) for doors up to 1000 mm-90 ° stop 1 Pc

LM609033 LM60 door closer heavy force (33 Nm) for doors up to 1100 mm-90 ° stop 1 Pc

LM6010525 LM60 door closer medium force (25 Nm) for doors up to 1000 mm-105 ° stop 1 Pc

LM6010533 LM60 door closer heavy force (33 Nm) for doors up to 1100 mm-105 ° stop 1 Pc

LM6025 LM60 door closer medium force (25 Nm) for doors up to 1000 mm-Without stop 1 Pc

LMPERNOI Italian pin 1 Pc

LMPERNOD German pin 1 Pc

LMPERNOF French pin 1 Pc

SEVAX OIL HYDRAULIC HINGE

SX-BT903/8 Sevax BTWIST oil hydraulic hinge, force EN3 (28 Nm), with 90° stop Brushed steel 1 Pc

SX-BT903/15 Sevax BTWIST oil hydraulic hinge, force EN3 (28 Nm), with 90° stop Polished steel 1 Pc

SX-BTUP1/8 BTWIST upper hinge Brushed steel 1 Pc

SX-BTUP1/15 BTWIST upper hinge Polished steel 1 Pc

SX-BTUP3/8 Ceiling pin for installation of the BTUP1 upper hinge Brushed steel 1 Pc

SX-BTUP3/15 Ceiling pin for installation of the BTUP1 upper hinge Polished steel 1 Pc

SX-BTUP5/8 Wall fitting upper hinge for fanlight Brushed steel 1 Pc

SX-BTUP5/15 Wall fitting upper hinge for fanlight Polished steel 1 Pc

* SX-BTUP7/8 Glass fitting upper hinge for fanlight Brushed steel 1 Pc

* SX-BTUP7/15 Glass fitting upper hinge for fanlight Polished steel 1 Pc

* Item available while stocks last

SX-BTKIT/8 BTWIST oil hydraulic hinge kit Brushed steel 1 Pc

SX-BTKIT/15 BTWIST oil hydraulic hinge kit Polished steel 1 Pc

ADJUSTABLE PIVOT HINGES 80 KG

CERPT80SQ/1 Snap pivot hinge for doors max 80kg, no visible screws Chrome 1 Pc

CERPT80SQ/2 Snap pivot hinge for doors max 80kg, no visible screws Gold 1 Pc

CERPT80SQ/3 Snap pivot hinge for doors max 80kg, no visible screws Brushed nickel 1 Pc

CERPT80/1 Snap pivot hinge for doors max 80kg Chrome 1 Pc

CERPT80/2 Snap pivot hinge for doors max 80kg Gold 1 Pc

CERPT80/3 Snap pivot hinge for doors max 80kg Brushed nickel 1 Pc

SYSTEMS FOR HINGED DOORS

Page 114

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 587/593 >>>

175,42

175,42

175,42

175,42

175,42

175,42

22,49

22,08

21,65

287,50

287,50

54,57

54,57

18,78

18,78

56,57

56,57

56,57

56,57

360,85

360,85

147,46

191,80

155,45

128,28

174,49

128,28

SYSTEMS FOR HINGED DOORS

Page 115 >>> CATALOGUE REFERENCE PAGE 595/598 >>>

AUTOMATIC SPRING HINGES DQ MATIQUE SERIES SQUARE

DQMATIQUE66/1 Central hinge DQ MATIQUE66 HD SQUARE, capacity 100Kg Chrome 1 Pc

DQMATIQUE66/24 Central hinge DQ MATIQUE66 HD SQUARE, capacity 100Kg Stainless steel effect 1 Pc

DQMATIQUE66/45 Central hinge DQ MATIQUE66 HD SQUARE, capacity 100Kg Matt Aluminium effect 1 Pc

DQMATIQUE44/1 Central hinge DQ MATIQUE44 HD SQUARE, capacity 50Kg Chrome 1 Pc

DQMATIQUE44/24 Central hinge DQ MATIQUE44 HD SQUARE, capacity 50Kg Stainless steel effect 1 Pc

DQMATIQUE44/45 Central hinge DQ MATIQUE44 HD SQUARE, capacity 50Kg Matt Aluminium effect 1 Pc

DQMATIQUE680/1 Glass/glass in line hinge DQ MATIQUE180 HD SQUARE, capacity 100Kg Chrome 1 Pc

DQMATIQUE680/24 Glass/glass in line hinge DQ MATIQUE180 HD SQUARE, capacity 100Kg Stainless steel effect 1 Pc

DQMATIQUE680/45 Glass/glass in line hinge DQ MATIQUE180 HD SQUARE, capacity 100Kg Matt Aluminium effect 1 Pc

DQMATIQUE480/1 Glass/glass in line hinge DQ MATIQUE180 HD SQUARE, capacity 50Kg Chrome 1 Pc

DQMATIQUE480/24 Glass/glass in line hinge DQ MATIQUE180 HD SQUARE, capacity 50Kg Stainless steel effect 1 Pc

DQMATIQUE480/45 Glass/glass in line hinge DQ MATIQUE180 HD SQUARE, capacity 50Kg Matt Aluminium effect 1 Pc

DQMATIQUE3/15 Shims for DQMATIQUE hinges Polished steel 1 Pc

DQMATIQUE3/8 Shims for DQMATIQUE hinges Brushed steel 1 Pc

SER-MY LOCK

SERMYS/1 SER-MY lock complete with cylinder different key Chrome 1 Pc

SERMYS/2 SER-MY lock complete with cylinder different key Gold 1 Pc

SERMYS/3 SER-MY lock complete with cylinder different key Brushed nickel 1 Pc

SERMYSU/1 SER-MY lock complete with cylinder single key Chrome 1 Pc

SERMYSU/2 SER-MY lock complete with cylinder single key Gold 1 Pc

SERMYSU/3 SER-MY lock complete with cylinder single key Brushed nickel 1 Pc

SERMYP/1 SER-MY lock complete with cylinder knob/single key Chrome 1 Pc

SERMYP/2 SER-MY lock complete with cylinder knob/single key Gold 1 Pc

SERMYP/3 SER-MY lock complete with cylinder knob/single key Brushed nickel 1 Pc

SERMYL/15 Steel striker plate H 100mm L 35mm Polished steel 1 Pc

SERMYL/8 Steel striker plate H 100mm L 35mm Brushed steel 1 Pc

SERMYC1/1 Keeper for SER-MY lock Chrome 1 Pc

SERMYC1/2 Keeper for SER-MY lock Gold 1 Pc

SERMYC1/3 Keeper for SER-MY lock Brushed nickel 1 Pc

SERMYMS/1 SER-MYM lock with handle complete with cylinder different key Chrome 1 Pc

SERMYMS/24 SER-MYM lock with handle complete with cylinder different key Brushed steel effect 1 Pc

SERMYMS/45 SER-MYM lock with handle complete with cylinder different key Matt aluminium effect 1 Pc

SERMYMSU/1 SER-MYM lock with handle complete with cylinder single key Chrome 1 Pc

SERMYMSU/24 SER-MYM lock with handle complete with cylinder single key Brushed steel effect 1 Pc

SERMYMSU/45 SER-MYM lock with handle complete with cylinder single key Matt aluminium effect 1 Pc

SERMYMP/1 SER-MYM lock with handle complete with cylinder knob/single key Chrome 1 Pc

SERMYMP/24 SER-MYM lock with handle complete with cylinder knob/single key Brushed steel effect 1 Pc

SERMYMP/45 SER-MYM lock with handle complete with cylinder knob/single key Matt aluminium effect 1 Pc

SERMYL/15 Steel striker plate H 100mm L 35mm Polished steel 1 Pc

SERMYL/8 Steel striker plate H 100mm L 35mm Brushed steel 1 Pc

Art. Description Finish Q.ty EURO

172,52

172,52

172,52

172,52

172,52

172,52

240,81

253,53

249,88

240,81

253,53

249,88

4,97

4,23

120,80

160,61

122,39

121,17

161,00

122,89

124,31

164,28

125,52

10,26

10,26

66,97

101,19

66,97

160,77

164,27

156,51

161,14

164,64

157,01

164,28

167,85

159,65

10,26

10,26

SERMYC300/1 SER-MY keeper, outer strike Chrome 1 Pc

SERMYC300/2 SER-MY keeper, outer strike Gold 1 Pc

SERMYC300/3 SER-MY keeper, outer strike Brushed nickel 1 Pc

SERMYC308/1 SER-MY keeper, inner strike (glass thickness 8 mm) Chrome 1 Pc

SERMYC308/2 SER-MY keeper, inner strike (glass thickness 8 mm) Gold 1 Pc

SERMYC308/3 SER-MY keeper, inner strike (glass thickness 8 mm) Brushed nickel 1 Pc

SERMYC310/1 SER-MY keeper, inner strike (glass thickness 10 mm) Chrome 1 Pc

SERMYC310/2 SER-MY keeper, inner strike (glass thickness 10 mm) Gold 1 Pc

SERMYC310/3 SER-MY keeper, inner strike (glass thickness 10 mm) Brushed nickel 1 Pc

SERMYC312/1 SER-MY keeper, inner strike (glass thickness 12 mm) Chrome 1 Pc

SERMYC312/2 SER-MY keeper, inner strike (glass thickness 12 mm) Gold 1 Pc

SERMYC312/3 SER-MY keeper, inner strike (glass thickness 12 mm) Brushed nickel 1 Pc

YC300/15 Outer strike Polished steel 1 Pc

YC300/2 Outer strike Gold 1 Pc

YC300/8 Outer strike Brushed steel 1 Pc

YC308/15 Inner strike (glass thickness 8 mm) Polished steel 1 Pc

YC308/2 Inner strike (glass thickness 8 mm) Gold 1 Pc

YC308/8 Inner strike (glass thickness 8 mm) Brushed steel 1 Pc

YC310/15 Inner strike (glass thickness 10 mm) Polished steel 1 Pc

YC310/2 Inner strike (glass thickness 10 mm) Gold 1 Pc

YC310/8 Inner strike (glass thickness 10 mm) Brushed steel 1 Pc

YC312/15 Inner strike (glass thickness 12 mm) Polished steel 1 Pc

YC312/2 Inner strike (glass thickness 12 mm) Gold 1 Pc

YC312/8 Inner strike (glass thickness 12 mm) Brushed steel 1 Pc

FR300R HINGES AND LATCHES FOR JAMBS

FR300R/15 FR300R steel hinges for narrow jambs Polished steel 1 Pc

FR300R/8 FR300R steel hinges for narrow jambs Brushed steel 1 Pc

SR119/15 SR 119 series latch with privacy latch and rotary knob Polished steel 1 Pc

SR119/8 SR 119 series latch with privacy latch and rotary knob Brushed steel 1 Pc

120 REX LATCHES FOR JAMBS

SR1220/15 Series 120 Rex latch for jambs with single key lock Polished steel 1 Pc

SR1220/8 Series 120 Rex latch for jambs with single key lock Brushed steel 1 Pc

SR1220D/15 Series 120 Rex latch for jambs with different key lock Polished steel 1 Pc

SR1220D/8 Series 120 Rex latch for jambs with different key lock Brushed steel 1 Pc

SR1220P/15 Series 120 Rex latch for jambs with lock and rotary knob Polished steel 1 Pc

SR1220P/8 Series 120 Rex latch for jambs with lock and rotary knob Brushed steel 1 Pc

S1228 Closing strike 65 x 40mm 1 Pc

S1227 Closing strike 65 x 27mm, for 8mm glass 1 Pc

S1229 Closing strike 65 x 29mm, for 10mm glass 1 Pc

S1231 Closing strike 65 x 31mm, for 12mm glass 1 Pc

SR1224/15 Double door counterlock - 120 Rex Polished steel 1 Pc

SR1224/8 Double door counterlock - 120 Rex Brushed steel 1 Pc

SYSTEMS FOR HINGED DOORS

Page 116

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 599/601 >>>

34.5214.5

100

66

15

16

Ø11

Ø5.8

YC300

8/10/12

34.5 2

14.5

100

66

15.5

14.5

Ø11

Ø5.

8

YC308

8

34.5 2

14.5

100

66

15

14

Ø11

Ø5.

8

YC310

10

34.5 2

14.5

100

66

14

13

Ø11

Ø5.

8

YC312

12

66,25

120,72

65,52

66,25

120,22

65,52

66,25

120,22

65,52

66,25

120,22

65,52

8,91

13,75

8,10

8,12

13,26

8,12

8,12

13,26

8,12

8,12

13,26

8,12

81,31

78,73

144,07

130,52

180,22

167,90

166,31

153,99

162,93

150,84

11,24

11,24

11,24

11,24

41,45

40,33

SYSTEMS FOR HINGED DOORS

Page 117 >>> CATALOGUE REFERENCE PAGE 602/607 >>>

FH 300C HINGES AND LATCHES FOR JAMBS

FH300C/15 FH300C steel hinge for narrow jambs Polished steel 1 Pc

FH300C/8 FH300C steel hinge for narrow jambs Brushed steel 1 Pc

SR118/15 SR 118 series latch with privacy latch and rotary knob Polished steel 1 Pc

SR118/8 SR 118 series latch with privacy latch and rotary knob Brushed steel 1 Pc

SRS1180U/15 SR 118 series latch for jambs with cylinder single key Polished steel 1 Pc

SRS1180U/8 SR 118 series latch for jambs with cylinder single key Brushed steel 1 Pc

SRS1180D/15 SR 118 series latch for jambs with cylinder different key Polished steel 1 Pc

SRS1180D/8 SR 118 series latch for jambs with cylinder different key Brushed steel 1 Pc

SRS1180P/15 SR 118 latch for jambs with cylinder with rotary knob Polished steel 1 Pc

SRS1180P/8 SR 118 latch for jambs with cylinder with rotary knob Brushed steel 1 Pc

S1228 Closing strike 65 x 40mm 1 Pc

S1227 Closing strike 65 x 27mm, for 8mm glass 1 Pc

S1229 Closing strike 65 x 29mm, for 10mm glass 1 Pc

S1231 Closing strike 65 x 31mm, for 12mm glass 1 Pc

SRC118/15 Double door counterlock - SR118 Polished steel 1 Pc

SRC118/8 Double door counterlock - SR118 Brushed steel 1 Pc

HINGES FOR NARROW JAMBS

FA100/97 FA100 aluminium hinge for narrow jambs Matt aluminium 1 Pc

FA50/97 FA50 aluminium hinge for narrow jambs Matt aluminium 1 Pc

FA180/97 FA180 aluminium hinge for narrow jambs Matt aluminium 1 Pc

FA580/97 FA580 aluminium hinge for narrow jambs Matt aluminium 1 Pc

CENTRAL APRO SERIES

APRO10UD/97 APRO central lock MECHANICAL - RIGHT single key Matt aluminium 1 Pc

APRO10UD/88 APRO central lock MECHANICAL - RIGHT single key Brushed steel-effect aluminium 1 Pc

APRO11DD/97 APRO central lock MECHANICAL - RIGHT different key Matt aluminium 1 Pc

APRO11DD/88 APRO central lock MECHANICAL - RIGHT different key Brushed steel-effect aluminium 1 Pc

APRO10US/97 APRO central lock MECHANICAL - LEFT single key Matt aluminium 1 Pc

APRO10US/88 APRO central lock MECHANICAL - LEFT single key Brushed steel-effect aluminium 1 Pc

APRO11DS/97 APRO central lock MECHANICAL - LEFT different key Matt aluminium 1 Pc

APRO11DS/88 APRO central lock MECHANICAL - LEFT different key Brushed steel-effect aluminium 1 Pc

APRO40U/97 APRO central lock MAGNETIC single key Matt aluminium 1 Pc

APRO40U/88 APRO central lock MAGNETIC single key Brushed steel-effect aluminium 1 Pc

APRO40D/97 APRO central lock MAGNETIC different key Matt aluminium 1 Pc

APRO40D/88 APRO central lock MAGNETIC different key Brushed steel-effect aluminium 1 Pc

Art. Description Finish Q.ty EURO

77,51

78,00

103,83

100,42

144,33

144,33

129,79

129,79

126,26

126,50

11,24

11,24

11,24

11,24

33,64

33,64

41,44

40,27

63,86

48,22

300,38

310,45

299,84

309,91

300,38

310,45

299,84

309,91

335,97

346,03

335,43

345,49

APRO SERIES FOR JAMBS

APROMEDXU/97 APRO RIGHT MECHANICAL lock for jambs, single key Matt aluminium 1 Pc

APROMEDXU/88 APRO RIGHT MECHANICAL lock for jambs, single key Brushed steel-effect aluminium 1 Pc

APROMEDXD/97 APRO RIGHT MECHANICAL lock for jamb, different key Matt aluminium 1 Pc

APROMEDXD/88 APRO RIGHT MECHANICAL lock for jamb, different key Brushed steel-effect aluminium 1 Pc

APROMESXU/97 APRO LEFT MECHANICAL lock for jamb, single key Matt aluminium 1 Pc

APROMESXU/88 APRO LEFT MECHANICAL lock for jamb, single key Brushed steel-effect aluminium 1 Pc

APROMESXD/97 APRO LEFT MECHANICAL lock for jamb, different key Matt aluminium 1 Pc

APROMESXD/88 APRO LEFT MECHANICAL lock for jamb, different key Brushed steel-effect aluminium 1 Pc

APROMADXU/97 APRO RIGHT MAGNETIC lock for jamb, single key Matt aluminium 1 Pc

APROMADXU/88 APRO RIGHT MAGNETIC lock for jamb, single key Brushed steel-effect aluminium 1 Pc

APROMADXD/97 APRO RIGHT MAGNETIC lock for jamb, different key Matt aluminium 1 Pc

APROMADXD/88 APRO RIGHT MAGNETIC lock for jamb, different key Brushed steel-effect aluminium 1 Pc

APROMASXU/97 APRO LEFT MAGNETIC lock for jamb, single key Matt aluminium 1 Pc

APROMASXU/88 APRO LEFT MAGNETIC lock for jamb, single key Brushed steel-effect aluminium 1 Pc

APROMASXD/97 APRO LEFT MAGNETIC lock for jamb, different key Matt aluminium 1 Pc

APROMASXD/88 APRO LEFT MAGNETIC lock for jamb, different key Brushed steel-effect aluminium 1 Pc

APRO SERIES COUNTERLOCK

APRO1008/97 APRO MECHANICAL central counterlock for glass thickness 8mm Matt aluminium 1 Pc

APRO1008/88 APRO MECHANICAL central counterlock for glass thickness 8mm Brushed steel-effect aluminium 1 Pc

APRO1010/97 APRO MECHANICAL central counterlock for glass thickness 10mm Matt aluminium 1 Pc

APRO1010/88 APRO MECHANICAL central counterlock for glass thickness 10mm Brushed steel-effect aluminium 1 Pc

APRO1012/97 APRO MECHANICAL central counterlock for glass thickness 12mm Matt aluminium 1 Pc

APRO1012/88 APRO MECHANICAL central counterlock for glass thickness 12mm Brushed steel-effect aluminium 1 Pc

APRO1013/97 APRO MECHANICAL central counterlock for glass thickness 13.52mm Matt aluminium 1 Pc

APRO1013/88 APRO MECHANICAL central counterlock for glass thickness 13.52mm Brushed steel-effect aluminium 1 Pc

APRO4008/97 APRO MAGNETIC central counterlock for glass thickness 8mm Matt aluminium 1 Pc

APRO4008/88 APRO MAGNETIC central counterlock for glass thickness 8mm Brushed steel-effect aluminium 1 Pc

APRO4010/97 APRO MAGNETIC central counterlock for glass thickness 10mm Matt aluminium 1 Pc

APRO4010/88 APRO MAGNETIC central counterlock for glass thickness 10mm Brushed steel-effect aluminium 1 Pc

APRO4012/97 APRO MAGNETIC central counterlock for glass thickness 12mm Matt aluminium 1 Pc

APRO4012/88 APRO MAGNETIC central counterlock for glass thickness 12mm Brushed steel-effect aluminium 1 Pc

APRO4013/97 APRO MAGNETIC central counterlock for glass thickness 13.52mm Matt aluminium 1 Pc

APRO4013/88 APRO MAGNETIC central counterlock for glass thickness 13.52mm Brushed steel-effect aluminium 1 Pc

APRO1020/7 APRO striking plate for intrados in aluminium and MECHANICAL bolt Matt chrome 1 Pc

APRO4040/7 APRO striking plate for intrados in aluminium and MAGNETIC bolt Matt chrome 1 Pc

APRO1050/7 Adjustable APRO striking plate for hinged doors and MECHANICAL bolt Matt chrome 1 Pc

APRO4080/7 Adjustable APRO striking plate for hinged doors and MAGNETIC bolt Matt chrome 1 Pc

SYSTEMS FOR HINGED DOORS

Page 118

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 608/609 >>>

303,56

314,16

303,02

313,62

303,56

314,16

303,02

313,62

339,15

349,74

338,61

349,20

339,15

349,74

338,61

349,20

129,54

135,90

129,54

135,90

129,54

135,90

129,54

135,90

136,32

142,68

136,32

142,68

136,32

142,68

136,32

142,68

11,25

14,60

4,42

11,21

SYSTEMS FOR HINGED DOORS

Page 119 >>> CATALOGUE REFERENCE PAGE 610/613 >>>

APRO SERIES 2203

APRO2203H/97 APRO2203 squared horizontal lock, single key Matt aluminium 1 Pc

APRO2203H/88 APRO2203 squared horizontal lock, single key Brushed steel-effect aluminium 1 Pc

APRO2203H/10 APRO2203 squared horizontal lock, single key Raw-finish aluminium 1 Pc

APRO2203HD/97 APRO2203 squared horizontal lock, different key Matt aluminium 1 Pc

APRO2203HD/88 APRO2203 squared horizontal lock, different key Brushed steel-effect aluminium 1 Pc

APRO2203HD/10 APRO2203 squared horizontal lock, different key Raw-finish aluminium 1 Pc

APRO2203HP/97 APRO2203 squared horizontal lock, with rotary knob Matt aluminium 1 Pc

APRO2203HP/88 APRO2203 squared horizontal lock, with rotary knob Brushed steel-effect aluminium 1 Pc

APRO2203HP/10 APRO2203 squared horizontal lock, with rotary knob Raw-finish aluminium 1 Pc

APROIN2203H/97 APRO2203 squared horizontal counterlock, for double door Matt aluminium 1 Pc

APROIN2203H/88 APRO2203 squared horizontal counterlock, for double door Brushed steel-effect aluminium 1 Pc

APROIN2203H/10 APRO2203 squared horizontal counterlock, for double door Raw-finish aluminium 1 Pc

APRO SERIES 1203

APRO1203H/97 APRO1203 round horizontal lock, single key Matt aluminium 1 Pc

APRO1203H/88 APRO1203 round horizontal lock, single key Brushed steel-effect aluminium 1 Pc

APRO1203H/10 APRO1203 round horizontal lock, single key Raw-finish aluminium 1 Pc

APRO1203HD/97 APRO1203 round horizontal lock, different key Matt aluminium 1 Pc

APRO1203HD/88 APRO1203 round horizontal lock, different key Brushed steel-effect aluminium 1 Pc

APRO1203HD/10 APRO1203 round horizontal lock, different key Raw-finish aluminium 1 Pc

APRO1203HP/97 APRO1203 round horizontal lock, with rotary knob Matt aluminium 1 Pc

APRO1203HP/88 APRO1203 round horizontal lock, with rotary knob Brushed steel-effect aluminium 1 Pc

APRO1203HP/10 APRO1203 round horizontal lock, with rotary knob Raw-finish aluminium 1 Pc

APROIN1203H/97 APRO1203 round horizontal counterlock, for double door Matt aluminium 1 Pc

APROIN1203H/88 APRO1203 round horizontal counterlock, for double door Brushed steel-effect aluminium 1 Pc

APROIN1203H/10 APRO1203 round horizontal counterlock, for double door Raw-finish aluminium 1 Pc

2203 - 1203 APRO SERIES HINGES

CER4ALSQ/97 Aluminium hinge for jambs, squared Matt aluminium 1 Pc

CER4ALSQ/88 Aluminium hinge for jambs, squared Brushed steel-effect aluminium 1 Pc

CER4AL/97 Aluminium hinge for jambs Matt aluminium 1 Pc

CER4AL/88 Aluminium hinge for jambs Brushed steel-effect aluminium 1 Pc

HINGES FOR JAMBS

CER175/1 Hinges for jambs to mount on 10 mm pivots Chrome 1 Pc

CER175/3 Hinges for jambs to mount on 10 mm pivots Brushed nickel 1 Pc

CER160/1 Hinges for jambs to mount on 10 mm pivots Chrome 1 Pc

CER160/3 Hinges for jambs to mount on 10 mm pivots Brushed nickel 1 Pc

Art. Description Finish Q.ty EURO

180,73

191,33

175,43

164,92

175,51

159,62

161,34

171,94

156,04

51,40

54,58

49,81

199,80

210,40

194,51

183,99

194,59

178,69

180,42

191,02

175,12

52,99

56,17

51,40

45,57

46,36

53,38

51,40

128,69

128,69

128,69

128,69

SYSTEMS FOR HINGED DOORS

Page 120 >>> CATALOGUE REFERENCE PAGE 614/617 >>>

PIVAN04/89 Anuba wall/hinge galvanised iron 83x15 mm Galvanised iron 1 Pc

PIVAN01/8 Anuba wall/hinge AISI 304 steel 83x15 mm Brushed steel 1 Pc

PIVAN05/89 Anuba wood/hinge galvanised iron 2 fittings Galvanised iron 1 Pc

PIVAN08/89 Anuba metal/hinge galvanised iron Galvanised iron 1 Pc

CER178/1 Hinge for jambs 129 mm H 71 mm Chrome 1 Pc

CER178/3 Hinge for jambs 129 mm H 71 mm Brushed nickel 1 Pc

CER168/1 Hinge for jambs 129 mm H 71 mm Chrome 1 Pc

CER168/3 Hinge for jambs 129 mm H 71 mm Brushed nickel 1 Pc

CER148/1 Vertical hinge for jambs 81 mm H 85 mm Chrome 1 Pc

CER148/3 Vertical hinge for jambs 81 mm H 85 mm Brushed nickel 1 Pc

LOCKS WITH OR WITHOUT KEY 175

S17501/15 Model 175 lock for jamb, with single key lock Polished steel 1 Pc

S17501/8 Model 175 lock for jamb, with single key lock Brushed steel 1 Pc

S17501D/15 Model 175 lock for jamb, with different key lock Polished steel 1 Pc

S17501D/8 Model 175 lock for jamb, with different key lock Brushed steel 1 Pc

S17501P/15 Model 175 lock for jamb, with single key lock with knob Polished steel 1 Pc

S17501P/8 Model 175 lock for jamb, with single key lock with knob Brushed steel 1 Pc

S17505/15 Model 175 lock for jamb, without lock Polished steel 1 Pc

S17505/8 Model 175 lock for jamb, without lock Brushed steel 1 Pc

S19515/15 Model 175 lock free, with single key lock Polished steel 1 Pc

S19515/8 Model 175 lock free, with single key lock Brushed steel 1 Pc

S19515D/15 Model 175 free lock, with different key lock Polished steel 1 Pc

S19515D/8 Model 175 free lock, with different key lock Brushed steel 1 Pc

S19515P/15 Model 175 free lock, with single key lock with knob Polished steel 1 Pc

S19515P/8 Model 175 free lock, with single key lock with knob Brushed steel 1 Pc

SPL11/15 Model 175 with strike Polished steel 1 Pc

SPL11/8 Model 175 with strike Brushed steel 1 Pc

SPL13/15 Model 175 without strike Polished steel 1 Pc

SPL13/8 Model 175 without strike Brushed steel 1 Pc

Art. Description Finish Q.ty EURO8,14

24,92

9,12

9,70

158,92

158,92

158,92

158,92

155,99

155,99

161,29

163,33

146,11

148,15

142,43

144,72

111,40

111,40

162,31

161,80

147,13

146,62

143,44

143,19

81,21

81,21

81,21

81,21

SYSTEMS FOR HINGED DOORS

Page 121 >>> CATALOGUE REFERENCE PAGE 618/621 >>>

LOCKS WITH OR WITHOUT KEY 160

S16002/15 Model 160 lock for jamb, with single key lock Polished steel 1 Pc

S16002/8 Model 160 lock for jamb, with single key lock Brushed steel 1 Pc

S16002D/15 Model 160 lock for jamb, with different key lock Polished steel 1 Pc

S16002D/8 Model 160 lock for jamb, with different key lock Brushed steel 1 Pc

S16002P/15 Model 160 lock for jamb, with single key lock with knob Polished steel 1 Pc

S16002P/8 Model 160 lock for jamb, with single key lock with knob Brushed steel 1 Pc

S16006/15 Model 160 lock for jamb, without lock Polished steel 1 Pc

S16006/8 Model 160 lock for jamb, without lock Brushed steel 1 Pc

S16004/15 Model 160 free lock, with single key lock Polished steel 1 Pc

S16004/8 Model 160 free lock, with single key lock Brushed steel 1 Pc

S16004D/15 Model 160 free lock, with different key lock Polished steel 1 Pc

S16004D/8 Model 160 free lock, with different key lock Brushed steel 1 Pc

S16004P/15 Model 160 free lock, with single key lock with knob Polished steel 1 Pc

S16004P/8 Model 160 free lock, with single key lock with knob Brushed steel 1 Pc

STL05/15 Model 160 with strike Polished steel 1 Pc

STL05/8 Model 160 with strike Brushed steel 1 Pc

STL07/15 Model 160 without strike Polished steel 1 Pc

STL07/8 Model 160 without strike Brushed steel 1 Pc

120 SMALL LATCHES

S1207K/15 120 Small series latch for jambs with patent key Polished steel 1 Pc

S1207K/8 120 Small series latch for jambs with patent key Brushed steel 1 Pc

S1205K/15 120 Small series latch with patent key Polished steel 1 Pc

S1205K/8 120 Small series latch with patent key Brushed steel 1 Pc

S1203/15 120 Small series latch for jambs with lock, single key Polished steel 1 Pc

S1203/8 120 Small series latch for jambs with lock, single key Brushed steel 1 Pc

S1203D/15 120 Small latch for jambs with lock, different key Polished steel 1 Pc

S1203D/8 120 Small latch for jambs with lock, different key Brushed steel 1 Pc

S1203P/15 120 Small latch for jambs with lock and rotary knob Polished steel 1 Pc

S1203P/8 120 Small latch for jambs with lock and rotary knob Brushed steel 1 Pc

Art. Description Finish Q.ty EURO

155,70

158,75

140,52

143,57

136,83

140,14

105,80

106,31

156,71

159,26

141,53

144,08

137,85

140,65

81,21

81,21

81,21

81,21

91,16

96,13

91,65

97,12

140,92

142,74

126,37

127,88

122,84

124,52

SYSTEMS FOR HINGED DOORS

Page 122 >>> CATALOGUE REFERENCE PAGE 621/625 >>>

S1201/15 120 Small series latch with lock, single key Polished steel 1 Pc

S1201/8 120 Small series latch with lock, single key Brushed steel 1 Pc

S1201D/15 120 Small latch with lock, different key Polished steel 1 Pc

S1201D/8 120 Small latch with lock, different key Brushed steel 1 Pc

S1201P/15 120 Small series latch with lock and rotary knob Polished steel 1 Pc

S1201P/8 120 Small series latch with lock and rotary knob Brushed steel 1 Pc

S1213 Closing strike 65 mm x 40 mm 1 Pc

S1215 Closing strike 83 mm x 40 mm 1 Pc

S1219 Closing strike 65 mm x 34 mm-8 mm glass 1 Pc

S1221 Closing strike 65 mm x 36 mm-10 mm glass 1 Pc

S1223 Closing strike 65 mm x 38 mm-12 mm glass 1 Pc

S1211/15 Counterlock for double door - 120 Small for jambs Polished steel 1 Pc

S1211/8 Counterlock for double door - 120 Small for jambs Brushed steel 1 Pc

S1209/15 Double door counterlock - 120 Small Polished steel 1 Pc

S1209/8 Double door counterlock - 120 Small Brushed steel 1 Pc

CISA2227D/95 European profile closing cylinder-different key Nickel plated 1 Pc

CISA2227U/95 European profile closing cylinder-single key Nickel plated 1 Pc

LOGS10U/1 European profile closing cylinder single key Chrome 1 Pc

LOGS10U/3 European profile closing cylinder single key Brushed nickel 1 Pc

LOGS10D/1 European profile closing cylinder different key Chrome 1 Pc

LOGS10D/3 European profile closing cylinder different key Brushed nickel 1 Pc

S1217U/1 Cylinder with rotary knob Chrome 1 Pc

S1217U/3 Cylinder with rotary knob Brushed nickel 1 Pc

HOPPE HCS LOCKS

SERH01 HOPPE HCS lock for glass from 8 to 13mm, key/key 1 Pc

SERH03 HOPPE HCS lock for glass from 8 to 13mm, key/grooved button 1 Pc

SERH05 HOPPE HCS lock for glass from 8 to 13mm, key/vacant-engaged indicator 1 Pc

SERH07 HOPPE HCS lock for glass from 8 to 13mm, key/knob 1 Pc

SERH09 HOPPE HCS lock for glass from 8 to 13mm, knob/grooved button 1 Pc

SERH11 HOPPE HCS lock for glass from 8 to 13mm, knob/vacant-engaged indicator 1 Pc

SERH13 HOPPE HCS counterlock 1 Pc

SERH15 HOPPE HCS counterplate for flush door 1 Pc

SERH17 HOPPE HCS counterplate for hinged door 1 Pc

Art. Description Finish Q.ty EURO142,38

145,48

127,84

130,62

124,31

127,26

11,24

11,24

11,24

11,24

11,24

38,72

38,72

36,22

36,22

26,53

36,84

24,40

25,05

24,08

24,62

30,11

30,11

212,85

207,38

209,35

207,38

201,91

203,88

83,05

6,41

6,41

SYSTEMS FOR HINGED DOORS

Page 123 >>> CATALOGUE REFERENCE PAGE 626/630 >>>

MERONI HINGES AND LOCKS

CERMGLISS/97 Meroni Gliss hinge Matt aluminium 1 Pc

CERMGLISS/91 Meroni Gliss hinge Polished aluminium 1 Pc

SERMF15/97 Meroni Forma lock with double lock single key Matt aluminium 1 Pc

SERMF15/91 Meroni Forma lock with double lock single key Polished aluminium 1 Pc

SERMF13/97 Meroni Forma lock with lock and emergency device Matt aluminium 1 Pc

SERMF13/91 Meroni Forma lock with lock and emergency device Polished aluminium 1 Pc

SERMFGL1/97 MERONI FGL1 counterlock Matt aluminium 1 Pc

SERMFGL1/91 MERONI FGL1 counterlock Polished aluminium 1 Pc

SOLEIL ROYAL SERIES HINGES

SPH2/9 Hinge for glass/wall doors series SOLEIL ROYAL Ø 40 x L 69.5 mm Machined steel (CNC) 1 Pc

SOLEIL ROYAL SERIES GLASS HOLDER

SPC501/9 Wall/glass glass holder series SOLEIL ROYAL Ø 40 x H 55 mm Machined steel (CNC) 1 Pc

SPC503/9 Wall/glass glass holder with flap series SOLEIL ROYAL Ø 40 x H 55 mm Machined steel (CNC) 1 Pc

SPC509/9 Glass/glass in-line glass holder series SOLEIL ROYAL Ø 40 x H 145 mm Machined steel (CNC) 1 Pc

SPC507/9 Glass/glass 90° glass holder series SOLEIL ROYAL Ø 40 x P 55 x L 55 mm Machined steel (CNC) 1 Pc

SOLEIL ROYAL SERIES KNOBS

POM8/9 Pair of knobs series SOLEIL ROYAL Ø 40 x L 29 mm Machined steel (CNC) 1 Pair

SOLEIL ROYAL SERIES LOCK WITH KNOB

SEROYS/15 SOLEIL ROYAL - lock + lock, single key Polished steel 1 Pc

SEROYS/8 SOLEIL ROYAL - lock + lock, single key Brushed steel 1 Pc

SEROYSD/15 SOLEIL ROYAL - lock + lock, different key Polished steel 1 Pc

SEROYSD/8 SOLEIL ROYAL - lock + lock, different key Brushed steel 1 Pc

SEROYP/15 SOLEIL ROYAL - knob + lock Polished steel 1 Pc

SEROYP/8 SOLEIL ROYAL - knob + lock Brushed steel 1 Pc

SEROYC/15 SOLEIL ROYAL lock striking plate H 100 x L 76 Polished steel 1 Pc

SEROYC/8 SOLEIL ROYAL lock striking plate H 100 x L 76 Brushed steel 1 Pc

Art. Description Finish Q.ty EURO

80,47

80,47

171,48

229,70

151,42

213,65

60,97

100,36

96,68

50,37

32,19

47,77

48,81

45,39

112,12

112,12

112,12

112,12

109,19

109,44

40,95

43,39

SYSTEMS FOR HINGED DOORS

Page 124 >>> CATALOGUE REFERENCE PAGE 631/634 >>>

DOOR STOPS

BT28/15 Strike with protective PVC profile 10 x 10 x L 3000 mm Polished steel 1 Pc

BT28/8 Strike with protective PVC profile 10 x 10 x L 3000 mm Brushed steel 1 Pc

FPT01/8 Door stop with ground fitting and magnet Brushed steel 1 Pc

FPT03/8 Wall fitting door stop Brushed steel 1 Pc

FPT21/8 Double door wall fitting door stop Brushed steel 1 Pc

FPT07/8 Door stop with glass fitting stud Brushed steel 1 Pc

FPT09/15 Door stop with rubber stud Polished steel 1 Pc

FPT09/8 Door stop with rubber stud Brushed steel 1 Pc

FPT11/15 Door stop with NBR rubber ring, flat head Polished steel 1 Pc

FPT11/8 Door stop with NBR rubber ring, flat head Brushed steel 1 Pc

FPT13/15 Door stop with NBR rubber ring, ball head Polished steel 1 Pc

FPT13/8 Door stop with NBR rubber ring, ball head Brushed steel 1 Pc

FPT15/15 Floor stop Polished steel 1 Pc

FPT15/8 Floor stop Brushed steel 1 Pc

MAGNETS

CAL005/1 Magnets for doors with brass covers H 78 x L 17 x P 22 mm Chrome 1 Pc

CAL005/2 Magnets for doors with brass covers H 78 x L 17 x P 22 mm Gold 1 Pc

CAL005/3 Magnets for doors with brass covers H 78 x L 17 x P 22 mm Brushed nickel 1 Pc

Art. Description Finish Q.ty EURO

260,96

248,69

36,22

36,22

31,09

77,94

10,49

13,99

30,65

25,41

30,65

25,41

25,92

26,23

42,88

45,64

47,22

SYSTEMS FOR HINGED DOORS

Page 125 >>> CATALOGUE REFERENCE PAGE 634/641 >>>

CAL006/1 Counterplate H 78 x L 20 mm for 8 mm glass Chrome 1 Pc

CAL006/2 Counterplate H 78 x L 20 mm for 8 mm glass Gold 1 Pc

CAL006/3 Counterplate H 78 x L 20 mm for 8 mm glass Brushed nickel 1 Pc

CAL007/1 Counterplate H 78 x L 20 mm for 10 mm glass Chrome 1 Pc

CAL007/2 Counterplate H 78 x L 20 mm for 10 mm glass Gold 1 Pc

CAL007/3 Counterplate H 78 x L 20 mm for 10 mm glass Brushed nickel 1 Pc

CAL008/1 Counterplate H 78 x L 20 mm for 12 mm glass Chrome 1 Pc

CAL008/2 Counterplate H 78 x L 20 mm for 12 mm glass Gold 1 Pc

CAL008/3 Counterplate H 78 x L 20 mm for 12 mm glass Brushed nickel 1 Pc

CALMU30/9 Magnet with wall fitting AISI 304 Machined steel (CNC) 1 Pc

GLASS SEALING SYSTEM

●GSL3000 Glass lip adhesive gasket L=3000mm with VHB double-sided Transparent 1 Pc

adhesive tape high sealing 3M, for glass panes from 8mm to 13.52mm

GSL812 Centring template for glass lip adhesive gasket, Orange 1 Pc

for glass panes from 8mm to 13.52mm

GSLSVL Disposable degreasing wipe impregnated with isopropyl alcohol 1 Pc

GS01875/97 Glass 100 automatic complete set, dimensions 40x13x900 mm Matt aluminium 1 Set

GS01875/91 Glass 100 automatic complete set, dimensions 40x13x900 mm Polished aluminium 1 Set

GS01875/88 Glass 100 automatic complete set, dimensions 40x13x900 mm Brushed steel-effect aluminium 1 Set

GS01100/97 Glass 100 automatic complete set, dimensions 40x13x1025 mm Matt aluminium 1 Set

GS01100/91 Glass 100 automatic complete set, dimensions 40x13x1025 mm Polished aluminium 1 Set

GS01100/88 Glass 100 automatic complete set, dimensions 40x13x1025 mm Brushed steel-effect aluminium 1 Set

GSP03100/97 Glass 300 pivot complete set, dimensions 28x11.5+8.5x1000 mm Matt aluminium 1 Set

GSP03100/91 Glass 300 pivot complete set, dimensions 28x11.5+8.5x1000 mm Polished aluminium 1 Set

GSP03100/88 Glass 300 pivot complete set, dimensions 28x11.5+8.5x1000 mm Brushed steel-effect aluminium 1 Set

Art. Description Finish Q.ty EURO14,70

17,47

19,05

14,70

17,47

19,05

14,70

17,47

19,05

48,86

44,18

10,26

2,19

63,22

63,22

63,22

64,37

64,37

64,37

73,08

87,45

101,72

PULL HANDLES AND KNOBS

Page 126 >>> CATALOGUE REFERENCE PAGE 646/648 >>>

PANIC EXIT DEVICE

MAP101/83 Side bolt with levers and casing max L 1285 x H 145 x D 95 mm Brushed steel PVD 1 Set

MAP101/56 Side bolt with levers and casing max L 1285 x H 145 x D 95 mm Grey 1 Set

MAP101/83 BOLT Side bolt with levers and casing max L 1285 x H 145 x D 95 mm Brushed steel PVD 1 Set

MAP101/56 BOLT Side bolt with levers and casing max L 1285 x H 145 x D 95 mm Grey 1 Set

MAP103/83 Stainless steel oval horizontal bar max L 1130 mm Brushed steel PVD 1 Pc

MAP103/56 Stainless steel oval horizontal bar max L 1130 mm Grey 1 Pc

MAP107/83 Glass kit for pull handle without external element H 145 x 37 mm Brushed steel PVD 1 Set

MAP109/83 Glass kit for pull handle with external rh element Brushed steel PVD 1 Set

MAP111/83 Glass kit for pull handle with external lh element Brushed steel PVD 1 Set

MAP105/83 Handle L 118 x H 124.5 x P 67.5 mm Brushed steel PVD 1 Pc

MAP105/56 Handle L 118 x H 124.5 x P 67.5 mm Grey 1 Pc

MAP123/56 Electric striking plate L 38 x H 133 x P 47 mm Grey 1 Pc

MAP125/83 PVD finish only casing for electric striking plate Brushed steel PVD 1 Pc

MAP127/93 Floor pit Brass 1 Set

MAP113/83 “BOLT” type bolt pair up to H=2200mm Brushed steel PVD 1 Set

MAP113/56 “BOLT” type bolt pair up to H=2200mm Grey 1 Set

MAP114/83 “BOLT” type bolt pair H from 2200 to 3200 mm Brushed steel PVD 1 Set

MAP114/56 “BOLT” type bolt pair H from 2200 to 3200 mm Grey 1 Set

MAP115/83 Glass kit for additional “BOLT” latches up to H=2200mm Brushed steel PVD 1 Set

MAP116/83 Glass kit for additional “BOLT” latches from H 2200 to 3200 Brushed steel PVD 1 Set

MAP117/83 Glass kit for side pin receiver Brushed steel PVD 1 Set

MAP119/83 Glass kit for adjustable top “BOLT” pin receiver Brushed steel PVD 1 Set

MAP121/95 Glass kit for daytime doorstop Nickel plated 1 Set

MAP-BASE/83 Base diagram at one closing point Brushed steel PVD 1 Set

MAP-BASE/56 Base diagram at one closing point Grey 1 Set

MAP-BASEM/83 * Base Diagram at one closing point with handle Brushed steel PVD 1 Set

MAP-BASEM/56 * Base Diagram at one closing point with handle Grey 1 Set

* Specify the door opening - see diagram General Catalogue p. 646

MAP-A220/83 Diagram - A - up to H= 2200 mm Brushed steel PVD 1 Set

MAP-A220/56 Diagram - A - up to H= 2200 mm Grey 1 Set

MAP-A220M/83 * Diagram - A - with handle up to H= 2200 mm Brushed steel PVD 1 Set

MAP-A220M/56 * Diagram - A - with handle up to H= 2200 mm Grey 1 Set

MAP-A320/83 Diagram - A - H from 2200 to 3200 mm Brushed steel PVD 1 Set

MAP-A320/56 Diagram - A - H from 2200 to 3200 mm Grey 1 Set

MAP-A320M/83 * Diagram - A - with handle H from 2200 to 3200 mm Brushed steel PVD 1 Set

MAP-A320M/56 * Diagram - A - with handle H from 2200 to 3200 mm Grey 1 Set

* Specify the door opening - see diagram General Catalogue p. 646

Art. Description Finish Q.ty EURO

704,40

161,49

849,88

305,10

124,31

23,22

199,63

220,29

220,29

320,52

70,16

279,96

103,24

11,77

190,59

47,31

298,30

90,10

310,89

386,66

192,74

92,42

5,25

1.028,34

384,34

1.369,52

475,16

1.675,30

886,14

2.016,48

976,97

1.858,78

1.004,71

2.199,96

1.095,53

PULL HANDLES AND KNOBS

Page 127 >>> CATALOGUE REFERENCE PAGE 648 >>>

MAP-B220/83 Diagram - B - up to H= 2200 mm Brushed steel PVD 1 Set

MAP-B220/56 Diagram - B - up to H= 2200 mm Grey 1 Set

MAP-B220M/83 * Diagram - B - with handle up to H= 2200 mm Brushed steel PVD 1 Set

MAP-B220M/56 * Diagram - B - with handle up to H= 2200 mm Grey 1 Set

MAP-B320/83 Diagram - B - H from 2200 to 3200 mm Brushed steel PVD 1 Set

MAP-B320/56 Diagram - B - H from 2200 to 3200 mm Grey 1 Set

MAP-B320M/83 * Diagram - B - with handle H from 2200 to 3200 mm Brushed steel PVD 1 Set

MAP-B320M/56 * Diagram - B - with handle H from 2200 to 3200 mm Grey 1 Set

* Specify the door opening - see diagram General Catalogue p. 646

MAP-C220/83 Diagram - C - up to H= 2200 mm Brushed steel PVD 1 Set

MAP-C220/56 Diagram - C - up to H= 2200 mm Grey 1 Set

MAP-C220M/83 * Diagram - C - with handle up to H= 2200 mm Brushed steel PVD 1 Set

MAP-C220M/56 * Diagram - C - with handle up to H= 2200 mm Grey 1 Set

MAP-C320/83 Diagram - C - H from 2200 to 3200 mm Brushed steel PVD 1 Set

MAP-C320/56 Diagram - C - H from 2200 to 3200 mm Grey 1 Set

MAP-C320M/83 * Diagram - C - with handle H from 2200 to 3200 mm Brushed steel PVD 1 Set

MAP-C320M/56 * Diagram - C - with handle H from 2200 to 3200 mm Grey 1 Set

* Specify the door opening - see diagram General Catalogue p. 646

MAP-E220/83 Diagram - E - up to H= 2200 mm Brushed steel PVD 1 Set

MAP-E220/56 Diagram - E - up to H= 2200 mm Grey 1 Set

MAP-E220M/83 * Diagram - E - with handle up to H= 2200 mm Brushed steel PVD 1 Set

MAP-E220M/56 * Diagram - E - with handle up to H= 2200 mm Grey 1 Set

MAP-E320/83 Diagram - E - H from 2200 to 3200 mm Brushed steel PVD 1 Set

MAP-E320/56 Diagram - E - H from 2200 to 3200 mm Grey 1 Set

MAP-E320M/83 * Diagram - E - with handle H from 2200 to 3200 mm Brushed steel PVD 1 Set

MAP-E320M/56 * Diagram - E - with handle H from 2200 to 3200 mm Grey 1 Set

* Specify the door opening - see diagram General Catalogue p. 646

MAP-F220/83 Diagram - F - up to H= 2200 mm Brushed steel PVD 1 Set

MAP-F220/56 Diagram - F - up to H= 2200 mm Grey 1 Set

MAP-F220M/83 * Diagram - F - with handle up to H= 2200 mm Brushed steel PVD 1 Set

MAP-F220M/56 * Diagram - F - with handle up to H= 2200 mm Grey 1 Set

MAP-F320/83 Diagram - F - H from 2200 to 3200 mm Brushed steel PVD 1 Set

MAP-F320/56 Diagram - F - H from 2200 to 3200 mm Grey 1 Set

MAP-F320M/83 * Diagram - F - with handle H from 2200 to 3200 mm Brushed steel PVD 1 Set

MAP-F320M/56 * Diagram - F - with handle H from 2200 to 3200 mm Grey 1 Set

* Specify the door opening - see diagram General Catalogue p. 646

MAP-G220/83 Diagram - G - up to H= 2200 mm Brushed steel PVD 1 Set

MAP-G220/56 Diagram - G - up to H= 2200 mm Grey 1 Set

MAP-G220M/83 * Diagram - G - with handle up to H= 2200 mm Brushed steel PVD 1 Set

MAP-G220M/56 * Diagram - G - with handle up to H= 2200 mm Grey 1 Set

MAP-G320/83 Diagram - G - H from 2200 to 3200 mm Brushed steel PVD 1 Set

MAP-G320/56 Diagram - G - H from 2200 to 3200 mm Grey 1 Set

MAP-G320M/83 * Diagram - G - with handle H from 2200 to 3200 mm Brushed steel PVD 1 Set

MAP-G320M/56 * Diagram - G - with handle H from 2200 to 3200 mm Grey 1 Set

* Specify the door opening - see diagram General Catalogue p. 646

Art. Description Finish Q.ty EURO1.767,72

978,57

2.108,91

1.069,39

1.951,20

1.097,13

2.292,39

1.187,96

1.868,04

1.078,88

2.209,22

1.169,71

2.051,52

1.197,45

2.392,70

1.288,27

1.960,46

1.171,31

2.301,65

1.262,13

2.143,94

1.289,87

2.485,12

1.380,70

2.896,38

1.463,22

3.237,56

1.554,05

3.079,86

1.581,78

3.421,04

1.672,61

2.988,80

1.555,64

3.329,98

1.646,47

3.172,28

1.674,21

3.513,46

1.765,03

PULL HANDLES AND KNOBS

Page 128 >>> CATALOGUE REFERENCE PAGE 652/656 >>>

ROUND PULL HANDLE WITH LOCK FOR GLASS DOORS

ZSS1400/8 Double pull handle with privacy lock with round section Ø 25 Brushed steel 1 Pair

in AISI 304 steel L 1400 mm, different key

ZMMS1400/8 Single pull handle with privacy lock with round section Ø 25 Brushed steel 1 Pc

in AISI 304 steel L 1400 mm, different key

ZSS1400U/8 Double pull handle with privacy lock with round section Ø 25 Brushed steel 1 Pair

in AISI 304 steel L 1400 mm, single key

ZMMS1400U/8 Single pull handle with privacy lock with round section Ø 25 Brushed steel 1 Pc

in AISI 304 steel L 1400 mm, single key

GL7300/3 Anti-dust pit Brushed nickel 1 Pc

ROUND PULL HANDLES FOR GLASS DOORS

ZMT400/8 Pair of round section pull handles Ø 25 mm in AISI 304 steel L 400 mm Brushed steel 1 Pair

ZMT500/8 Pair of round section pull handles Ø 25 mm in AISI 304 steel L 500 mm Brushed steel 1 Pair

ZMT800/8 Pair of round section pull handles Ø 25 mm in AISI 304 steel L 800 mm Brushed steel 1 Pair

ZMT1400/8 Pair of round section pull handles Ø 25 mm in AISI 304 steel L 1400 mm Brushed steel 1 Pair

ZMT2000/8 Pair of round section pull handles Ø 25 mm in AISI 304 steel L 2000 mm Brushed steel 1 Pair

ZMT/A Pair of round section pull handles Ø 25 mm in AISI 304 steel custom On demand 1 Pair

ZSIT400/8 Round section single pull handle Ø 25 mm in AISI 304 steel L 400 mm Brushed steel 1 Pc

ZSIT500/8 Round section single pull handle Ø 25 mm in AISI 304 steel L 500 mm Brushed steel 1 Pc

ZSIT800/8 Round section single pull handle Ø 25 mm in AISI 304 steel L 800 mm Brushed steel 1 Pc

ZSIT1400/8 Round section single pull handle Ø 25 mm in AISI 304 steel L 1400 mm Brushed steel 1 Pc

ZSIT2000/8 Round section single pull handle Ø 25 mm in AISI 304 steel L 2000 mm Brushed steel 1 Pc

ZSIT/A Round section single pull handle Ø 25 mm in AISI 304 steel custom On demand 1 Pc

SQUARE PULL HANDLES FOR GLASS DOORS

ZQUA500/8 Pair of square section pull handles 25x25 mm in AISI 304 steel L 500 mm Brushed steel 1 Pair

ZQUA800/8 Pair of square section pull handles 25x25 mm in AISI 304 steel L 800 mm Brushed steel 1 Pair

ZQUA1400/8 Pair of square section pull handles 25x25 mm in AISI 304 steel L 1400 mm Brushed steel 1 Pair

ZQUA/A Pair of square section pull handles 25x25 mm in AISI 304 steel custom On demand 1 Pair

ZSIQ500/8 Square section single pull handle 25x25 mm in AISI 304 steel L 500 mm Brushed steel 1 Pc

ZSIQ800/8 Square section single pull handle 25x25 mm in AISI 304 steel L 800 mm Brushed steel 1 Pc

ZSIQ1400/8 Square section single pull handle 25x25 mm in AISI 304 steel L 1400 mm Brushed steel 1 Pc

ZSIQ/A Square section single pull handle 25x25 mm in AISI 304 steel custom On demand 1 Pc

FLAT PULL HANDLES FOR GLASS DOORS

ZPI500/8 Pair of flat section pull handles 35x10 mm in AISI 304 steel L 500 mm Brushed steel 1 Pair

ZPI800/8 Pair of flat section pull handles 35x10 mm in AISI 304 steel L 800 mm Brushed steel 1 Pair

ZPI/A Pair of flat section pull handles 35x10 mm in AISI 304 steel custom On demand 1 Pair

ZSIP500/8 Single flat section pull handle 35x10 mm in AISI 304 steel L 500 mm Brushed steel 1 Pc

ZSIP800/8 Single flat section pull handle 35x10 mm in AISI 304 steel L 800 mm Brushed steel 1 Pc

ZSIP/A Single flat section pull handle 35x10 mm in AISI 304 steel custom On demand 1 Pc

ZUV/9 Single pull handle fitting for UV bonding application Machined steel (CNC) 1 Pc

ZATT/8 Flat fittings pair Brushed steel 1 Pc

Art. Description Finish Q.ty EURO

611,25

491,51

611,25

491,51

19,39

270,79

277,86

295,60

443,80

495,26

CUSTOM

201,22

207,93

216,80

325,39

351,12

CUSTOM

340,11

397,96

521,79

CUSTOM

239,05

267,98

364,39

CUSTOM

298,55

414,39

CUSTOM

218,27

276,19

CUSTOM

34,75

67,03

PULL HANDLES AND KNOBS

Page 129 >>> CATALOGUE REFERENCE PAGE 657/662 >>>

STEEL PULL HANDLES

PHC3246/8 Round handle in line Ø32mm centre distance 460mm Brushed steel 1 Pair

MN25850/15 Pair of steel round pull handles Ø 25 mm L 850 mm Polished steel 1 Pair

MN25850/8 Pair of steel round pull handles Ø 25 mm L 850 mm Brushed steel 1 Pair

MN251200/15 Pair of steel round pull handles Ø 25 mm L 1200 mm Polished steel 1 Pair

MN251200/8 Pair of steel round pull handles Ø 25 mm L 1200 mm Brushed steel 1 Pair

MN25300/15 Pair of steel round pull handles Ø 25 mm L 300 mm Polished steel 1 Pair

MN25300/8 Pair of steel round pull handles Ø 25 mm L 300 mm Brushed steel 1 Pair

MN25400/15 Pair of steel round pull handles Ø 25 mm L 400 mm Polished steel 1 Pair

MN25400/8 Pair of steel round pull handles Ø 25 mm L 400 mm Brushed steel 1 Pair

MN25500/15 Pair of steel round pull handles Ø 25 mm L 500 mm Polished steel 1 Pair

MN25500/8 Pair of steel round pull handles Ø 25 mm L 500 mm Brushed steel 1 Pair

MN25800/15 Pair of steel round pull handles Ø 25 mm L 800 mm Polished steel 1 Pair

MN25800/8 Pair of steel round pull handles Ø 25 mm L 800 mm Brushed steel 1 Pair

MN1620/15 Pair of handles 300 mm x Ø 16 mm Polished steel 1 Pair

MN1620/8 Pair of handles 300 mm x Ø 16 mm Brushed steel 1 Pair

MN2020/15 Pair of handles 300 mm x Ø 20 mm Polished steel 1 Pair

MN2020/8 Pair of handles 300 mm x Ø 20 mm Brushed steel 1 Pair

PMAN90/15 Handle 90 with knob, L 225 x H 55 x 20mm, for 6/8mm glass Polished steel 1 Set

PMAN1131/15 Handle 1131 with knob, L 375 x H 55 x 13mm, for 6/8mm glass Polished steel 1 Set

Art. Description Finish Q.ty EURO

135,67

174,02

164,23

216,69

191,60

79,83

72,99

104,92

96,94

118,61

109,48

164,23

155,10

57,83

49,96

60,93

52,99

62,93

75,60

PULL HANDLES AND KNOBS

Page 130 >>> CATALOGUE REFERENCE PAGE 663/666 >>>

ZAMAK PULL HANDLES

PMAN1340/1 Handle 1340, L 400 x H 50 x 20mm, for 6/10mm glass Chrome 1 Pair

PMAN1340/24 Handle 1340, L 400 x H 50 x 20mm, for 6/10mm glass Stainless steel effect 1 Pair

PMAN1332/1 Handle 1332, L 300 x H 50 x 20mm, for 6/10mm glass Chrome 1 Pair

PMAN1332/24 Handle 1332, L 300 x H 50 x 20mm, for 6/10mm glass Stainless steel effect 1 Pair

PMAN1322/1 Handle 1322, L 200 x H 50 x 20mm, for 6/10mm glass Chrome 1 Pair

PMAN1322/24 Handle 1322, L 200 x H 50 x 20mm, for 6/10mm glass Stainless steel effect 1 Pair

PMAN1530/1 Handle 1530, L 155 x H 32 x 20mm, for 6/8mm glass Chrome 1 Pair

PMAN1530/24 Handle 1530, L 155 x H 32 x 20mm, for 6/8mm glass Stainless steel effect 1 Pair

PMAN1375/1 Shower box handle 1375 Chrome 1 Pair

BRASS OR ALUMINIUM PULL HANDLES

PM1/1 Pair of handles Ø 14 mm H 460 mm Chrome 1 Pair

PM1/3 Pair of handles Ø 14 mm H 460 mm Brushed nickel 1 Pair

PM1/97 Pair of handles Ø 14 mm H 460 mm Matt aluminium 1 Pair

PM2/1 Pair of handles Ø 14 mm H 310 mm Chrome 1 Pair

PM2/3 Pair of handles Ø 14 mm H 310 mm Brushed nickel 1 Pair

PM2/97 Pair of handles Ø 14 mm H 310 mm Matt aluminium 1 Pair

PM3/1 Pair of handles Ø 14 mm H 200 mm Chrome 1 Pair

PM3/3 Pair of handles Ø 14 mm H 200 mm Brushed nickel 1 Pair

PM3/97 Pair of handles Ø 14 mm H 200 mm Matt aluminium 1 Pair

PM4/1 4 Washers to increase the supporting surface Polished chrome 1 Set

PM4/3 4 Washers to increase the supporting surface Brushed nickel 1 Set

ALUMINIUM PULL HANDLES

LM320/97 Handle 15X15 mm length 460 mm A 320 mm B 23 mm Matt aluminium 1 Pair

LM320/91 Handle 15X15 mm length 460 mm A 320 mm B 23 mm Polished aluminium 1 Pair

LM320/88 Handle 15X15 mm length 460 mm A 320 mm B 23 mm Brushed steel-effect aluminium 1 Pair

LM224/97 Handle 15X15 mm length 310 mm A 224 mm B 23 mm Matt aluminium 1 Pair

LM224/91 Handle 15X15 mm length 310 mm A 224 mm B 23 mm Polished aluminium 1 Pair

LM224/88 Handle 15X15 mm length 310 mm A 224 mm B 23 mm Brushed steel-effect aluminium 1 Pair

LM128/97 Handle 15X15 mm length 200 mm A 128 mm B 23 mm Matt aluminium 1 Pair

LM128/91 Handle 15X15 mm length 200 mm A 128 mm B 23 mm Polished aluminium 1 Pair

LM128/88 Handle 15X15 mm length 200 mm A 128 mm B 23 mm Brushed steel-effect aluminium 1 Pair

Art. Description Finish Q.ty EURO

96,10

105,95

84,30

93,66

70,25

79,03

31,48

31,48

26,13

104,38

108,56

135,09

82,08

85,36

103,37

64,31

66,88

95,14

16,11

16,75

83,36

100,61

85,80

75,07

82,18

75,07

68,25

73,71

67,27

PULL HANDLES AND KNOBS

Page 131 >>> CATALOGUE REFERENCE PAGE 667/673 >>>

ALUMINIUM HANDLES WITH VHB FIXING

MAN400V160/97 Aluminium handle with 3M double-sided adhesive tape mod. 400 L=240mm Matt aluminium 1 Pc

MAN400V160/91 Aluminium handle with 3M double-sided adhesive tape mod. 400 L=240mm Polished aluminium 1 Pc

MAN400V320/97 Aluminium handle with 3M double-sided adhesive tape mod. 400 L=390mm Matt aluminium 1 Pc

MAN400V320/91 Aluminium handle with 3M double-sided adhesive tape mod. 400 L=390mm Polished aluminium 1 Pc

MAN400V448/97 Aluminium handle with 3M double-sided adhesive tape mod. 400 L=540mm Matt aluminium 1 Pc

MAN400V448/91 Aluminium handle with 3M double-sided adhesive tape mod. 400 L=540mm Polished aluminium 1 Pc

MAN401V160/97 Aluminium handle with 3M double-sided adhesive tape mod. 401 L=240mm Matt aluminium 1 Pc

MAN401V160/91 Aluminium handle with 3M double-sided adhesive tape mod. 401 L=240mm Polished aluminium 1 Pc

MAN401V320/97 Aluminium handle with 3M double-sided adhesive tape mod. 401 L=390mm Matt aluminium 1 Pc

MAN401V320/91 Aluminium handle with 3M double-sided adhesive tape mod. 401 L=390mm Polished aluminium 1 Pc

MAN401V448/97 Aluminium handle with 3M double-sided adhesive tape mod. 401 L=540mm Matt aluminium 1 Pc

MAN401V448/91 Aluminium handle with 3M double-sided adhesive tape mod. 401 L=540mm Polished aluminium 1 Pc

MAN410V250/88 Aluminium handle with 3M double-sided adhesive tape mod. 410 L=250mm Brushed steel-effect aluminium 1 Pc

MAN410V250/91 Aluminium handle with 3M double-sided adhesive tape mod. 410 L=250mm Polished aluminium 1 Pc

MAN410V250/97 Aluminium handle with 3M double-sided adhesive tape mod. 410 L=250mm Matt aluminium 1 Pc

MAN410V350/88 Aluminium handle with 3M double-sided adhesive tape mod. 410 L=350mm Brushed steel-effect aluminium 1 Pc

MAN410V350/91 Aluminium handle with 3M double-sided adhesive tape mod. 410 L=350mm Polished aluminium 1 Pc

MAN410V350/97 Aluminium handle with 3M double-sided adhesive tape mod. 410 L=350mm Matt aluminium 1 Pc

MAN412V250/88 Aluminium handle with 3M double-sided adhesive tape mod. 412 L=250mm Brushed steel-effect aluminium 1 Pc

MAN412V250/91 Aluminium handle with 3M double-sided adhesive tape mod. 412 L=250mm Polished aluminium 1 Pc

MAN412V250/97 Aluminium handle with 3M double-sided adhesive tape mod. 412 L=250mm Matt aluminium 1 Pc

MAN412V350/88 Aluminium handle with 3M double-sided adhesive tape mod. 412 L=350mm Brushed steel-effect aluminium 1 Pc

MAN412V350/91 Aluminium handle with 3M double-sided adhesive tape mod. 412 L=350mm Polished aluminium 1 Pc

MAN412V350/97 Aluminium handle with 3M double-sided adhesive tape mod. 412 L=350mm Matt aluminium 1 Pc

MAN414V250/88 Aluminium handle with 3M double-sided adhesive tape mod. 414 L=250mm Brushed steel-effect aluminium 1 Pc

MAN414V250/91 Aluminium handle with 3M double-sided adhesive tape mod. 414 L=250mm Polished aluminium 1 Pc

MAN414V250/97 Aluminium handle with 3M double-sided adhesive tape mod. 414 L=250mm Matt aluminium 1 Pc

MAN414V350/88 Aluminium handle with 3M double-sided adhesive tape mod. 414 L=350mm Brushed steel-effect aluminium 1 Pc

MAN414V350/91 Aluminium handle with 3M double-sided adhesive tape mod. 414 L=350mm Polished aluminium 1 Pc

MAN414V350/97 Aluminium handle with 3M double-sided adhesive tape mod. 414 L=350mm Matt aluminium 1 Pc

MAN404V160/97 Aluminium handle with 3M double-sided adhesive tape mod. 404 L=230mm Matt aluminium 1 Pc

MAN404V160/91 Aluminium handle with 3M double-sided adhesive tape mod. 404 L=230mm Polished aluminium 1 Pc

MAN404V320/97 Aluminium handle with 3M double-sided adhesive tape mod. 404 L=380mm Matt aluminium 1 Pc

MAN404V320/91 Aluminium handle with 3M double-sided adhesive tape mod. 404 L=380mm Polished aluminium 1 Pc

MAN404V448/97 Aluminium handle with 3M double-sided adhesive tape mod. 404 L=530mm Matt aluminium 1 Pc

MAN404V448/91 Aluminium handle with 3M double-sided adhesive tape mod. 404 L=530mm Polished aluminium 1 Pc

MAN408V160/97 Aluminium handle with 3M double-sided adhesive tape mod. 408 L=260mm Matt aluminium 1 Pc

MAN408V160/91 Aluminium handle with 3M double-sided adhesive tape mod. 408 L=260mm Polished aluminium 1 Pc

MAN408V320/97 Aluminium handle with 3M double-sided adhesive tape mod. 408 L=410mm Matt aluminium 1 Pc

MAN408V320/91 Aluminium handle with 3M double-sided adhesive tape mod. 408 L=410mm Polished aluminium 1 Pc

MAN408V448/97 Aluminium handle with 3M double-sided adhesive tape mod. 408 L=560mm Matt aluminium 1 Pc

MAN408V448/91 Aluminium handle with 3M double-sided adhesive tape mod. 408 L=560mm Polished aluminium 1 Pc

Art. Description Finish Q.ty EURO

20,98

30,18

31,70

42,23

43,03

56,64

20,35

29,25

30,68

40,74

41,54

54,71

27,02

25,96

24,90

29,67

28,61

27,55

24,37

23,31

22,25

27,55

26,49

25,43

24,37

23,31

22,25

25,96

24,90

23,84

29,06

40,97

45,34

59,53

62,54

81,11

20,46

29,34

29,73

39,48

39,74

52,33

PULL HANDLES AND KNOBS

Page 132 >>> CATALOGUE REFERENCE PAGE 674/677 >>>

HANDLES FOR POCKET SLIDING DOORS

MSC7/1 Handle for pocket sliding doors with hook, model C7 Chrome 1 Pc

MSC7/24 Handle for pocket sliding doors with hook, model C7 Brushed steel effect 1 Pc

MSC7/45 Handle for pocket sliding doors with hook, model C7 Matt aluminium effect 1 Pc

MSC5/1 Handle for sliding doors model C5 Chrome 1 Pc

MSC5/24 Handle for sliding doors model C5 Brushed steel effect 1 Pc

MSC5/45 Handle for sliding doors model C5 Matt aluminium effect 1 Pc

MSC8/1 Handle for pocket sliding doors with hook and section for wall profile Chrome 1 Pc

MSC8/24 Handle for pocket sliding doors with hook and section for wall profile Brushed steel effect 1 Pc

MSC8/45 Handle for pocket sliding doors with hook and section for wall profile Matt aluminium effect 1 Pc

MSC6/1 Handle for pocket sliding doors with section for wall profile Chrome 1 Pc

MSC6/24 Handle for pocket sliding doors with section for wall profile Brushed steel effect 1 Pc

MSC6/45 Handle for pocket sliding doors with section for wall profile Matt aluminium effect 1 Pc

ALUMINIUM HANDLES FOR SLIDING DOORS

HAND6640/1 Handle 66 x 40mm to be applied to the glass by means of screws Chrome 1 Pair

HAND6640/65 Handle 66 x 40mm to be applied to the glass by means of screws Matt black 1 Pair

HAND6640/88 Handle 66 x 40mm to be applied to the glass by means of screws Brushed steel-effect aluminium 1 Pair

HAND6640/91 Handle 66 x 40mm to be applied to the glass by means of screws Polished aluminium 1 Pair

HAND6640/97 Handle 66 x 40mm to be applied to the glass by means of screws Matt aluminium 1 Pair

HAND10052/1 Handle 100 x 52mm to be applied to the glass by means of screws Chrome 1 Pair

HAND10052/65 Handle 100 x 52mm to be applied to the glass by means of screws Matt black 1 Pair

HAND10052/88 Handle 100 x 52mm to be applied to the glass by means of screws Brushed steel-effect aluminium 1 Pair

HAND10052/91 Handle 100 x 52mm to be applied to the glass by means of screws Polished aluminium 1 Pair

HAND10052/97 Handle 100 x 52mm to be applied to the glass by means of screws Matt aluminium 1 Pair

HAND13040/1 Handle 130 x 40mm to be applied to the glass by means of screws Chrome 1 Pair

HAND13040/65 Handle 130 x 40mm to be applied to the glass by means of screws Matt black 1 Pair

HAND13040/88 Handle 130 x 40mm to be applied to the glass by means of screws Brushed steel-effect aluminium 1 Pair

HAND13040/91 Handle 130 x 40mm to be applied to the glass by means of screws Polished aluminium 1 Pair

HAND13040/97 Handle 130 x 40mm to be applied to the glass by means of screws Matt aluminium 1 Pair

ALUMINIUM HANDLES FOR SLIDING DOORS WITH VHB FIXING

HAND6640VHB/1 Handle 66 x 40mm to be applied to the glass by means of adhesive Chrome 1 Pc

HAND6640VHB/65 Handle 66 x 40mm to be applied to the glass by means of adhesive Matt black 1 Pc

HAND6640VHB/88 Handle 66 x 40mm to be applied to the glass by means of adhesive Brushed steel-effect aluminium 1 Pc

HAND6640VHB/91 Handle 66 x 40mm to be applied to the glass by means of adhesive Polished aluminium 1 Pc

HAND6640VHB/97 Handle 66 x 40mm to be applied to the glass by means of adhesive Matt aluminium 1 Pc

Art. Description Finish Q.ty EURO

89,52

93,51

90,61

84,25

87,96

85,84

93,20

100,14

98,02

83,14

86,31

85,25

79,16

49,60

52,46

58,18

47,69

98,24

63,90

68,67

75,35

61,04

103,96

66,76

71,53

79,16

61,99

40,53

25,75

27,18

30,04

24,80

PULL HANDLES AND KNOBS

Page 133 >>> CATALOGUE REFERENCE PAGE 677/682 >>>

HAND10052VHB/1 Handle 100 x 52mm to be applied to the glass by means of adhesive Chrome 1 Pc

HAND10052VHB/65 Handle 100 x 52mm to be applied to the glass by means of adhesive Matt black 1 Pc

HAND10052VHB/88 Handle 100 x 52mm to be applied to the glass by means of adhesive Brushed steel-effect aluminium 1 Pc

HAND10052VHB/91 Handle 100 x 52mm to be applied to the glass by means of adhesive Polished aluminium 1 Pc

HAND10052VHB/97 Handle 100 x 52mm to be applied to the glass by means of adhesive Matt aluminium 1 Pc

HAND13040VHB/1 Handle 130 x 40mm to be applied to the glass by means of adhesive Chrome 1 Pc

HAND13040VHB/65 Handle 130 x 40mm to be applied to the glass by means of adhesive Matt black 1 Pc

HAND13040VHB/88 Handle 130 x 40mm to be applied to the glass by means of adhesive Brushed steel-effect aluminium 1 Pc

HAND13040VHB/91 Handle 130 x 40mm to be applied to the glass by means of adhesive Polished aluminium 1 Pc

HAND13040VHB/97 Handle 130 x 40mm to be applied to the glass by means of adhesive Matt aluminium 1 Pc

ALUMINIUM HANDLES FOR SLIDING DOORS

MAL6036/97 Round aluminium handle Ø 60 mm with 42 mm interior Matt aluminium 1 Pc

MAL6036/91 Round aluminium handle Ø 60 mm with 42 mm interior Polished aluminium 1 Pc

MAL6036/88 Round aluminium handle Ø 60 mm with 42 mm interior Brushed steel-effect aluminium 1 Pc

MAL6050/97 Round aluminium handle Ø 60 mm with 54 mm interior Matt aluminium 1 Pc

MAL6050/91 Round aluminium handle Ø 60 mm with 54 mm interior Polished aluminium 1 Pc

MAL6050/88 Round aluminium handle Ø 60 mm with 54 mm interior Brushed steel-effect aluminium 1 Pc

AISI304 STEEL HANDLES FOR SLIDING DOORS

HAND10057/15 Handle 100 x 57mm to be applied to the glass by means of screws Polished steel 1 Pair

HAND10057/8 Handle 100 x 57mm to be applied to the glass by means of screws Brushed steel 1 Pair

HAND12062/15 Handle 120 x 62mm to be applied to the glass by means of screws Polished steel 1 Pair

HAND12062/8 Handle 120 x 62mm to be applied to the glass by means of screws Brushed steel 1 Pair

AISI304 STEEL HANDLES FOR SLIDING DOORS WITH VHB FIXING

HAND10057VHB/15 Handle 100 x 57mm to be applied to the glass by means of adhesive Polished steel 1 Pc

HAND10057VHB/8 Handle 100 x 57mm to be applied to the glass by means of adhesive Brushed steel 1 Pc

HAND12062VHB/15 Handle 120 x 62mm to be applied to the glass by means of adhesive Polished steel 1 Pc

HAND12062VHB/8 Handle 120 x 62mm to be applied to the glass by means of adhesive Brushed steel 1 Pc

STEEL HANDLES FOR SLIDING DOORS

MAT60/9 Pair of round handles Ø 60 mm Machined steel (CNC) 1 Pair

Art. Description Finish Q.ty EURO51,03

33,86

36,24

39,58

32,43

53,89

35,29

37,67

41,49

32,90

42,47

42,47

42,47

42,47

42,47

42,47

110,64

110,64

127,80

127,80

58,18

58,18

66,76

66,76

80,44

PULL HANDLES AND KNOBS

Page 134 >>> CATALOGUE REFERENCE PAGE 682/686 >>>

MAQ60/9 Pair of square handles 60x60 mm Machined steel (CNC) 1 Pair

MAT40/9 Pair of round handles Ø 40 mm Machined steel (CNC) 1 Pair

MAQ40/9 Pair of square handles 40x40 mm Machined steel (CNC) 1 Pair

MAT4314/15 Rings for sliding doors Ø 40 mm open Polished steel 1 Pair

MAT4314/8 Rings for sliding doors Ø 40 mm open Brushed steel 1 Pair

MAT4320/15 Rings for sliding doors Ø 40 mm closed Polished steel 1 Pair

MAT4320/8 Rings for sliding doors Ø 40 mm closed Brushed steel 1 Pair

MAT6314/15 Rings for sliding doors Ø 60 mm open Polished steel 1 Pair

MAT6314/8 Rings for sliding doors Ø 60 mm open Brushed steel 1 Pair

MAT6320/15 Rings for sliding doors Ø 60 mm closed Polished steel 1 Pair

MAT6320/8 Rings for sliding doors Ø 60 mm closed Brushed steel 1 Pair

MAT8314/15 Rings for sliding doors Ø 63 mm open Polished steel 1 Pair

MAT8314/8 Rings for sliding doors Ø 63 mm open Brushed steel 1 Pair

MAT8320/15 Rings for sliding doors Ø 58 mm closed Polished steel 1 Pair

MAT8320/8 Rings for sliding doors Ø 58 mm closed Brushed steel 1 Pair

AISI304 STEEL HANDLES FOR SLIDING DOORS WITH VHB FIXING

MABDQ40/9 Single square handle 40x40 mm with double-sided adhesive tape Machined steel (CNC) 1 Pc

MABDT40/9 Single round handle Ø 40 mm with double-sided adhesive tape Machined steel (CNC) 1 Pc

FXGAB10/8 Template for mounting MAUVQ40 and MAUVT40 handles Brushed steel 1 Pc

BRASS HANDLES FOR SLIDING DOORS

MAN30A/1 Rings for sliding doors Ø 30 mm open Chrome 1 Pc

MAN30A/2 Rings for sliding doors Ø 30 mm open Gold 1 Pc

MAN30A/3 Rings for sliding doors Ø 30 mm open Brushed nickel 1 Pc

MAN30C/1 Rings for sliding doors Ø 30 mm closed Chrome 1 Pc

MAN30C/2 Rings for sliding doors Ø 30 mm closed Gold 1 Pc

MAN30C/3 Rings for sliding doors Ø 30 mm closed Brushed nickel 1 Pc

Art. Description Finish Q.ty EURO137,90

46,47

93,43

31,09

26,64

31,09

26,64

35,53

31,97

35,53

31,97

48,71

48,30

48,71

48,30

45,86

22,55

22,03

12,12

20,04

16,26

14,19

21,71

18,33

PULL HANDLES AND KNOBS

Page 135 >>> CATALOGUE REFERENCE PAGE 686/689 >>>

MAN40A/1 Rings for sliding doors Ø 40 mm open Chrome 1 Pc

MAN40A/2 Rings for sliding doors Ø 40 mm open Gold 1 Pc

MAN40A/3 Rings for sliding doors Ø 40 mm open Brushed nickel 1 Pc

MAN40C/1 Rings for sliding doors Ø 40 mm closed Chrome 1 Pc

MAN40C/2 Rings for sliding doors Ø 40 mm closed Gold 1 Pc

MAN40C/3 Rings for sliding doors Ø 40 mm closed Brushed nickel 1 Pc

MAN60A/1 Rings for sliding doors Ø 60 mm open Chrome 1 Pc

MAN60A/2 Rings for sliding doors Ø 60 mm open Gold 1 Pc

MAN60A/92 Rings for sliding doors Ø 60 mm open Matt nickel 1 Pc

MAN60C/1 Rings for sliding doors Ø 60 mm closed Chrome 1 Pc

MAN60C/2 Rings for sliding doors Ø 60 mm closed Gold 1 Pc

MAN60C/92 Rings for sliding doors Ø 60 mm closed Matt nickel 1 Pc

MSC9/1 Round handle with grip Ø 60 mm Polished chrome 1 Pair

MSC9/3 Round handle with grip Ø 60 mm Brushed nickel 1 Pair

STEEL KNOBS

POM1ACC20/9 Steel knob pair Ø 20x30 mm Machined steel (CNC) 1 Pair

POM1ACC25/9 Steel knob pair Ø 25x30 mm Machined steel (CNC) 1 Pair

POM8/9 SOLEIL ROYAL series knob pair Ø 40x29 mm Machined steel (CNC) 1 Pair

POM10/9 ETOILE series knob pair Ø 30x29 mm Machined steel (CNC) 1 Pair

POM6/9 LUMIERE series knob pair Ø 24x29 mm Machined steel (CNC) 1 Pair

BRASS KNOBS

MNQ2470/1 SQUARE handle Chrome 1 Pair

MN2030/1 Handle 2030 H 33 x L 59 mm Chrome 1 Pair

MN2030/24 Handle 2030 H 33 x L 59 mm Brushed steel effect 1 Pair

Art. Description Finish Q.ty EURO15,42

22,11

19,59

15,96

23,56

20,13

28,47

32,41

30,88

30,91

38,09

33,99

76,40

74,29

26,46

33,07

45,39

43,11

33,87

98,29

57,48

59,99

PULL HANDLES AND KNOBS

Page 136 >>> CATALOGUE REFERENCE PAGE 690/693 >>>

POM18170/1 Pair of knobs for doors series 181 Ø 70 mm Chrome 1 Pair

POM18170/3 Pair of knobs for doors series 181 Ø 70 mm Brushed nickel 1 Pair

POM18170/22 Pair of knobs for doors series 181 Ø 70 mm Gold P.V.D. 1 Pair

POM18150/1 Pair of knobs for doors series 181 Ø 50 mm Chrome 1 Pair

POM18150/3 Pair of knobs for doors series 181 Ø 50 mm Brushed nickel 1 Pair

POM18150/22 Pair of knobs for doors series 181 Ø 50 mm Gold P.V.D. 1 Pair

POM4535/1 Pair of brass knobs Ø 45x35 mm Chrome 1 Pair

POM4535/3 Pair of brass knobs Ø 45x35 mm Brushed nickel 1 Pair

SP255/1 Pair of brass knobs Ø40x37 mm Chrome 1 Pair

SP255/24 Pair of brass knobs Ø40x37 mm Brushed steel effect 1 Pair

POM45PT/1 Pair of brass knobs Ø 40x24 mm flat Chrome 1 Pair

POM45PT/3 Pair of brass knobs Ø 40x24 mm flat Brushed nickel 1 Pair

VETCIL35/1 Pair of cylindrical brass knobs Ø 35 mm Chrome 1 Pair

VETCIL35/2 Pair of cylindrical brass knobs Ø 35 mm Gold 1 Pair

VETCIL35/3 Pair of cylindrical brass knobs Ø 35 mm Brushed nickel 1 Pair

POMPVC/1 Pair of brass / PVC knobs Ø 30x45 mm Chrome 1 Pair

POMPVC/3 Pair of brass / PVC knobs Ø 30x45 mm Brushed nickel 1 Pair

SP2255/1 Pair of brass knobs Ø25.5x33 mm Chrome 1 Pair

SP2255/24 Pair of brass knobs Ø25.5x33 mm Brushed steel effect 1 Pair

POM01/1 Ball knobs Ø 20x27 mm Chrome 1 Pc

POM01/2 Ball knobs Ø 20x27 mm Gold 1 Pc

POM01/3 Ball knobs Ø 20x27 mm Brushed nickel 1 Pc

POM01/4 Ball knobs Ø 20x27 mm Bronze 1 Pc

POM02/1 Ball knobs Ø 25x33 mm Chrome 1 Pc

POM02/2 Ball knobs Ø 25x33 mm Gold 1 Pc

POM02/3 Ball knobs Ø 25x33 mm Brushed nickel 1 Pc

POM02/4 Ball knobs Ø 25x33 mm Bronze 1 Pc

POM03/1 Ball knobs Ø 30x39 mm Chrome 1 Pc

POM03/2 Ball knobs Ø 30x39 mm Gold 1 Pc

POM03/3 Ball knobs Ø 30x39 mm Brushed nickel 1 Pc

POM03/4 Ball knobs Ø 30x39 mm Bronze 1 Pc

POM04/1 Ball knobs Ø 35x45 mm Chrome 1 Pc

POM04/2 Ball knobs Ø 35x45 mm Gold 1 Pc

POM04/3 Ball knobs Ø 35x45 mm Brushed nickel 1 Pc

POM04/4 Ball knobs Ø 35x45 mm Bronze 1 Pc

Art. Description Finish Q.ty EURO195,81

198,89

231,08

135,17

137,68

172,12

60,75

62,49

49,45

50,42

43,11

45,16

52,69

67,29

56,11

41,59

42,98

25,13

26,45

6,62

5,04

6,35

5,34

9,41

7,73

8,98

8,15

14,40

12,19

13,75

12,80

19,50

16,76

18,54

17,61

PULL HANDLES AND KNOBS

Page 137 >>> CATALOGUE REFERENCE PAGE 694/697 >>>

DQTS2525/1 Pair of brass knobs with grip 25x25x25 Chrome 1 Pair

DQTS2525/24 Pair of brass knobs with grip 25x25x25 Brushed nickel 1 Pair

DQP2525/1 Pair of brass knobs 25x25x25 mm Chrome 1 Pair

DQP2525/3 Pair of brass knobs 25x25x25 mm Brushed nickel 1 Pair

DQP2525/65 Pair of brass knobs 25x25x25 mm Matt black 1 Pair

DQP2525/R2 Pair of brass knobs 25x25x25 mm RAL9005 Matt black 1 Pair

POM2525/1 Pair of brass knobs 25x25x43 mm Chrome 1 Pair

POM2525/3 Pair of brass knobs 25x25x43 mm Brushed nickel 1 Pair

POM2525/65 Pair of brass knobs 25x25x43 mm Matt black 1 Pair

POM2525/R2 Pair of brass knobs 25x25x43 mm RAL9005 Matt black 1 Pair

KNOBS WITH GLASS

POM75/1 Compressed knobs Ø 75 for glass doors Brushed glass/chrome 1 Pair

POM75/2 Compressed knobs Ø 75 for glass doors Brushed glass/gold 1 Pair

POM75/3 Compressed knobs Ø 75 for glass doors Brushed glass/brushed nickel 1 Pair

POM65BT/1 Knobs Ø 65 for glass doors Bubble glass/ chrome 1 Pair

POM65BT/2 Knobs Ø 65 for glass doors Bubble glass/ gold 1 Pair

POM65BT/3 Knobs Ø 65 for glass doors Bubble glass/ brushed nickel 1 Pair

POM65T/1 Knobs Ø 65 for glass doors Transparent/ chrome 1 Pair

POM65T/2 Knobs Ø 65 for glass doors Transparent/ gold 1 Pair

POM65T/3 Knobs Ø 65 for glass doors Transparent/ brushed nickel 1 Pair

POM65S/1 Knobs Ø 65 for glass doors Brushed glass/ chrome 1 Pair

POM65S/2 Knobs Ø 65 for glass doors Brushed glass/ gold 1 Pair

POM65S/3 Knobs Ø 65 for glass doors Brushed glass/ brushed nickel 1 Pair

POM65TC/1 Knobs Ø 65 for glass doors Transparent coloured/ chrome 1 Pair

POM65TC/2 Knobs Ø 65 for glass doors Transparent coloured/ gold 1 Pair

POM65TC/3 Knobs Ø 65 for glass doors Transparent coloured/ brushed nickel 1 Pair

POM65SC/1 Knobs Ø 65 for glass doors Brushed coloured/ chrome 1 Pair

POM65SC/2 Knobs Ø 65 for glass doors Brushed coloured/ gold 1 Pair

POM65SC/3 Knobs Ø 65 for glass doors Brushed coloured/ brushed nickel 1 Pair

POM90540T/1 ARIUS 905 series knobs Ø 40 mm Transparent/ chrome 1 Pc

POM90540T/2 ARIUS 905 series knobs Ø 40 mm Transparent/ gold 1 Pc

POM90555T/1 ARIUS 905 series knobs Ø 55 mm Transparent/ chrome 1 Pc

POM90555T/2 ARIUS 905 series knobs Ø 55 mm Transparent/ gold 1 Pc

POM45T/1 Compressed knobs Ø 45 for shower partitions Transparent/ chrome 1 Pair

POM45T/2 Compressed knobs Ø 45 for shower partitions Transparent/ gold 1 Pair

POM45T/3 Compressed knobs Ø 45 for shower partitions Transparent/ brushed nickel 1 Pair

POM45S/1 Compressed knobs Ø 45 for shower partitions Brushed glass/ chrome 1 Pair

POM45S/2 Compressed knobs Ø 45 for shower partitions Brushed glass/ gold 1 Pair

POM45S/3 Compressed knobs Ø 45 for shower partitions Brushed glass/ brushed nickel 1 Pair

POMBD40BT/1 Knobs Ø 40 mm for shower partitions Bubble glass/ chrome 1 Pair

POMBD40BT/2 Knobs Ø 40 mm for shower partitions Bubble glass/ gold 1 Pair

POMBD40BT/3 Knobs Ø 40 mm for shower partitions Bubble glass/ brushed nickel 1 Pair

POMBD40T/1 Knobs Ø 40 mm for shower partitions Transparent/ chrome 1 Pair

POMBD40T/2 Knobs Ø 40 mm for shower partitions Transparent/ gold 1 Pair

Art. Description Finish Q.ty EURO36,75

36,75

34,05

34,05

32,97

56,32

38,91

38,37

41,07

60,92

184,29

188,12

188,12

207,17

211,01

211,01

166,56

170,39

170,39

180,45

184,29

184,29

166,56

170,39

170,39

180,45

184,29

184,29

65,82

68,79

183,56

201,75

64,82

66,28

68,13

69,45

71,17

72,76

85,09

86,26

86,37

64,77

65,94

PULL HANDLES AND KNOBS

Page 138 >>> CATALOGUE REFERENCE PAGE 697/699 >>>

POMBD40T/3 Knobs Ø 40 mm for shower partitions Transparent/ brushed nickel 1 Pair

POMBD40S/1 Knobs Ø 40 mm for shower partitions Brushed glass/ chrome 1 Pair

POMBD40S/2 Knobs Ø 40 mm for shower partitions Brushed glass/ gold 1 Pair

POMBD40S/3 Knobs Ø 40 mm for shower partitions Brushed glass/ brushed nickel 1 Pair

POMBD40TC/1 Knobs Ø 40 mm for shower partitions Transparent coloured/ chrome 1 Pair

POMBD40TC/2 Knobs Ø 40 mm for shower partitions Transparent coloured/ gold 1 Pair

POMBD40TC/3 Knobs Ø 40 mm for shower partitions Transparent coloured/ brushed nickel 1 Pair

POMBD40SC/1 Knobs Ø 40 mm for shower partitions Brushed coloured/ chrome 1 Pair

POMBD40SC/2 Knobs Ø 40 mm for shower partitions Brushed coloured/ gold 1 Pair

POMBD40SC/3 Knobs Ø 40 mm for shower partitions Brushed coloured/ brushed nickel 1 Pair

POMVE20T/1 Glass paste knobs Ø 20 mm Transparent/ chrome 1 Pc

POMVE20T/2 Glass paste knobs Ø 20 mm Transparent/ gold 1 Pc

POMVE20T/3 Glass paste knobs Ø 20 mm Transparent/ brushed nickel 1 Pc

POMVE20S/1 Glass paste knobs Ø 20 mm Brushed glass/ chrome 1 Pc

POMVE20S/2 Glass paste knobs Ø 20 mm Brushed glass/ gold 1 Pc

POMVE20S/3 Glass paste knobs Ø 20 mm Brushed glass/ brushed nickel 1 Pc

POMVE25T/1 Glass paste knobs Ø 25 mm Transparent/ chrome 1 Pc

POMVE25T/2 Glass paste knobs Ø 25 mm Transparent/ gold 1 Pc

POMVE25T/3 Glass paste knobs Ø 25 mm Transparent/ brushed nickel 1 Pc

POMVE25S/1 Glass paste knobs Ø 25 mm Brushed glass/ chrome 1 Pc

POMVE25S/2 Glass paste knobs Ø 25 mm Brushed glass/ gold 1 Pc

POMVE25S/3 Glass paste knobs Ø 25 mm Brushed glass/ brushed nickel 1 Pc

POMVE25TC/1 Glass paste knobs Ø 25 mm Transparent coloured/ chrome 1 Pc

POMVE25TC/2 Glass paste knobs Ø 25 mm Transparent coloured/ gold 1 Pc

POMVE25TC/3 Glass paste knobs Ø 25 mm Transparent coloured/ brushed nickel 1 Pc

POMVE25SC/1 Glass paste knobs Ø 25 mm Brushed coloured/ chrome 1 Pc

POMVE25SC/2 Glass paste knobs Ø 25 mm Brushed coloured/ gold 1 Pc

POMVE25SC/3 Glass paste knobs Ø 25 mm Brushed coloured/ brushed nickel 1 Pc

POMVE30T/1 Glass paste knobs Ø 30 mm Transparent/ chrome 1 Pc

POMVE30T/2 Glass paste knobs Ø 30 mm Transparent/ gold 1 Pc

POMVE30T/3 Glass paste knobs Ø 30 mm Transparent/ brushed nickel 1 Pc

POMVE30S/1 Glass paste knobs Ø 30 mm Brushed glass/ chrome 1 Pc

POMVE30S/2 Glass paste knobs Ø 30 mm Brushed glass/ gold 1 Pc

POMVE30S/3 Glass paste knobs Ø 30 mm Brushed glass/ brushed nickel 1 Pc

VETPOM13325S Round knob 25 S Ø 25x10 x H 22 mm Brushed glass 1 Pc

VETPOM13325T Round knob 25 T Ø 25x10 x H 22 mm Transparent glass 1 Pc

VETPOM13330S Square knob 30 S 30x30x10 x H 22 mm Brushed glass 1 Pc

VETPOM13330T Square knob 30 T 30x30x10 x H 22 mm Transparent glass 1 Pc

VETPOM13328S Cylindrical knob 28 S Ø 28 +- 2 x45 mm Brushed glass 1 Pc

VETPOM13328T Cylindrical knob 28 T Ø 28 +- 2 x45 mm Transparent glass with brushed facade 1 Pc

VETPOM13340S Oval knob 40 S L 40x16x10 x H 22 mm Brushed glass 1 Pc

VETPOM13340T Oval knob 40 T L 40x16x10 x H 22 mm Transparent glass 1 Pc

Art. Description Finish Q.ty EURO67,10

69,85

70,91

72,29

64,77

65,94

67,10

69,85

70,91

72,29

25,56

26,09

26,84

26,99

27,41

28,27

26,09

26,78

27,37

27,41

27,99

28,69

26,09

26,78

27,25

27,41

27,99

28,73

26,09

26,78

27,37

27,41

27,99

28,69

24,80

25,82

29,65

27,87

24,59

32,50

21,62

22,75

SYSTEMS FOR SHOWER PARTITIONS

Page 139 >>> CATALOGUE REFERENCE PAGE 703/705 >>>

DOCCIA FLAT

DCCFTMUR/15 Doccia Flat Kit, wall/wall fitting in AISI 304 for 8 mm glass pane Polished steel 1 Set

DCCFTMUR/8 Doccia Flat Kit, wall/wall fitting in AISI 304 for 8 mm glass pane Brushed steel 1 Set

DCCFTVET/15 Doccia Flat Kit, wall/glass fitting in AISI 304 for 8 mm glass pane Polished steel 1 Set

DCCFTVET/8 Doccia Flat Kit, wall/glass fitting in AISI 304 for 8 mm glass pane Brushed steel 1 Set

DCCFTVV/15 Doccia Flat Kit, glass/glass fitting in AISI 304 for 8 mm glass pane Polished steel 1 Set

DCCFTVV/8 Doccia Flat Kit, glass/glass fitting in AISI 304 for 8 mm glass pane Brushed steel 1 Set

DCCFT90/15 Doccia Flat Kit, wall/corner/wall fitting in AISI 304 for 8 mm glass pane Polished steel 1 Set

DCCFT90/8 Doccia Flat Kit, wall/corner/wall fitting in AISI 304 for 8 mm glass pane Brushed steel 1 Set

GLMFT1000/15 Flat track 30x10 mm L=1000 mm, in AISI 304, not drilled Polished steel 1 Pc

GLMFT1000/8 Flat track 30x10 mm L=1000 mm, in AISI 304, not drilled Brushed steel 1 Pc

GLMFT2000/15 Flat track 30x10 mm L=2000 mm, in AISI 304, not drilled Polished steel 1 Pc

GLMFT2000/8 Flat track 30x10 mm L=2000 mm, in AISI 304, not drilled Brushed steel 1 Pc

GLMFT3000/15 Flat track 30x10 mm L=3000 mm, in AISI 304, not drilled Polished steel 1 Pc

GLMFT3000/8 Flat track 30x10 mm L=3000 mm, in AISI 304, not drilled Brushed steel 1 Pc

GLMDCCFORO Hole and cut to measure 1 Pc

DCCFT12/15 Eccentric sliding roller Ø 40 mm, including anti-derailment Polished steel 1 Pc

DCCFT12/8 Eccentric sliding roller Ø 40 mm, including anti-derailment Brushed steel 1 Pc

DCCFT16/15 Fixed glass fitting Ø 30 mm Polished steel 1 Pc

DCCFT16/8 Fixed glass fitting Ø 30 mm Brushed steel 1 Pc

DCCFT18/15 Wall fitting 40 x 30 x 15 mm Polished steel 1 Pc

DCCFT18/8 Wall fitting 40 x 30 x 15 mm Brushed steel 1 Pc

DCCFT20/15 Stroke stop 58 x 15 x 20 mm with rubber stop Polished steel 1 Pc

DCCFT20/8 Stroke stop 58 x 15 x 20 mm with rubber stop Brushed steel 1 Pc

GLMFT37/15 Fitting for side locking of the fixed side glass with the track, AISI 304 Polished steel 1 Pc

GLMFT37/8 Fitting for side locking of the fixed side glass with the track, AISI 304 Brushed steel 1 Pc

Art. Description Finish Q.ty EURO

227,25

202,27

256,36

236,47

285,48

270,67

464,04

420,00

43,13

41,71

63,46

60,93

149,97

104,67

72,99

67,06

60,22

15,05

13,69

15,74

13,69

15,74

13,69

28,99

31,48

SYSTEMS FOR SHOWER PARTITIONS

Page 140 >>> CATALOGUE REFERENCE PAGE 705/707 >>>

GLMFT90/15 Corner fi tting for 30x10 mm bar Polished steel 1 Pc

GLMFT90/8 Corner fi tting for 30x10 mm bar Brushed steel 1 Pc

DCC08/1 Floor guide with snap insertion in PBD profi le for 8 mm glass pane Chrome 1 Pc

DCC08/24 Floor guide with snap insertion in PBD profi le for 8 mm glass pane Stainless steel effect 1 Pc

DCC10/1 Floor guide with snap insertion in PBD profi le for 10 mm glass pane Chrome 1 Pc

DCC10/24 Floor guide with snap insertion in PBD profi le for 10 mm glass pane Stainless steel effect 1 Pc

DCC90/1 90° joint in zamak to be inserted in art. PBD3183 Chrome 1 Pc

DCC90/24 90° joint in zamak to be inserted in art. PBD3183 Stainless steel effect 1 Pc

DCC90/6 90° joint in zamak to be inserted in art. PBD3183 Matt black 1 Pc

●PBD3183/91 U-shaped dam for shower partitions Length 3000 mm Polished aluminium 1 Pc

●PBD3183/88 U-shaped dam for shower partitions Length 3000 mm Brushed steel-effect aluminium 1 Pc

●PBD3183/97 U-shaped dam for shower partitions Length 3000 mm Matt aluminium 1 Pc

●PBD3183/6 U-shaped dam for shower partitions Length 3000 mm Matt black 1 Pc

●PBD3183.220/91 U-shaped dam for shower partitions Length 2200 mm Polished aluminium 1 Pc

●PBD3183.220/88 U-shaped dam for shower partitions Length 2200 mm Brushed steel-effect aluminium 1 Pc

●PBD3183.220/97 U-shaped dam for shower partitions Length 2200 mm Matt aluminium 1 Pc

●PBD3183.220/6 U-shaped dam for shower partitions Length 2200 mm Matt black 1 Pc

●PBD3184/91 Bevelled upper profi le Length 3000 mm Polished aluminium 1 Pc

●PBD3184/88 Bevelled upper profi le Length 3000 mm Brushed steel-effect aluminium 1 Pc

●PBD3184/97 Bevelled upper profi le Length 3000 mm Matt aluminium 1 Pc

●PBD3184/6 Bevelled upper profi le Length 3000 mm Matt black 1 Pc

PBD3184,150/91 Bevelled upper profi le Length 1498 mm Polished aluminium 1 Pc

PBD3184,150/88 Bevelled upper profi le Length 1498 mm Brushed steel-effect aluminium 1 Pc

PBD3184,150/97 Bevelled upper profi le Length 1498 mm Matt aluminium 1 Pc

PBD3184,150/6 Bevelled upper profi le Length 1498 mm Matt black 1 Pc

PBD3184,100/91 Bevelled upper profi le Length 992 mm Polished aluminium 1 Pc

PBD3184,100/88 Bevelled upper profi le Length 992 mm Brushed steel-effect aluminium 1 Pc

PBD3184,100/97 Bevelled upper profi le Length 992 mm Matt aluminium 1 Pc

PBD3184,100/6 Bevelled upper profi le Length 992 mm Matt black 1 Pc

PBDTP/91 Cap for PBD profi le Polished aluminium 1 Pc

PBDTP/88 Cap for PBD profi le Brushed steel-effect aluminium 1 Pc

PBDTP/97 Cap for PBD profi le Matt aluminium 1 Pc

PBDTP/6 Cap for PBD profi le Matt black 1 Pc

GTUP2 Glass holder profi le - Thickness: 2 mm Transparent Per m

GTUP2G Glass holder profi le - Thickness: 2 mm Embossed Per m

GTUP4 Glass holder profi le - Thickness: 4 mm Transparent Per m

GTUP4G Glass holder profi le - Thickness: 4 mm Embossed Per m

GLMFT40/15 Glass fi tting for 30x10 mm track, AISI 304 Polished steel 1 Pc

GLMFT40/8 Glass fi tting for 30x10 mm track, AISI 304 Brushed steel 1 Pc

Art. Description Finish Q.ty EURO31,64

34,49

25,20

22,35

25,20

22,35

20,07

24,98

27,26

40,87

36,88

34,01

98,51

34,49

27,70

25,63

64,43

29,30

20,92

19,40

89,97

22,63

18,44

17,68

52,97

17,75

14,96

14,45

37,97

11,97

11,97

6,39

8,78

0,86

1,25

1,20

1,60

57,68

62,50

SYSTEMS FOR SHOWER PARTITIONS

Page 141 >>> CATALOGUE REFERENCE PAGE 707/717 >>>

GLMFT30/15 Wall fitting for GLMFT 36x30 mm track, for 8/10 mm glass panes, AISI 304 Polished steel 1 Pc

GLMFT30/8 Wall fitting for GLMFT 36x30 mm track, for 8/10 mm glass panes, AISI 304 Brushed steel 1 Pc

GLMFT50/15 Glass fitting for GLMFT 41x30 mm track, for 8/10 mm glass panes, AISI 304 Polished steel 1 Pc

GLMFT50/8 Glass fitting for GLMFT 41x30 mm track, for 8/10 mm glass panes, AISI 304 Brushed steel 1 Pc

DOCCIA FLAT KIT

DCCFLAT003/15 Model with rollers wall/wall for 8 mm glass pane Polished steel 1 Set

DCCFLAT003/8 Model with rollers wall/wall for 8 mm glass pane Brushed steel 1 Set

DCCFLAT007/15 Model with rollers wall/glass for 8 mm glass pane Polished steel 1 Set

DCCFLAT007/8 Model with rollers wall/glass for 8 mm glass pane Brushed steel 1 Set

DCCFLAT009/15 Model with rollers glass/glass for 8 mm glass pane Polished steel 1 Set

DCCFLAT009/8 Model with rollers glass/glass for 8 mm glass pane Brushed steel 1 Set

DCCFLAT011/15 Corner roller model with aligned glass panes for 8 mm glass pane Polished steel 1 Set

DCCFLAT011/8 Corner roller model with aligned glass panes for 8 mm glass pane Brushed steel 1 Set

GIUMAX FLAT

GLMFLATMUR/15 Giumax Flat Kit, wall/wall fitting in AISI 304 for 8 mm glass pane Polished steel 1 Set

GLMFLATMUR/8 Giumax Flat Kit, wall/wall fitting in AISI 304 for 8 mm glass pane Brushed steel 1 Set

GLMFLATVET/15 Giumax Flat Kit, wall/glass fitting in AISI 304 for 8 mm glass pane Polished steel 1 Set

GLMFLATVET/8 Giumax Flat Kit, wall/glass fitting in AISI 304 for 8 mm glass pane Brushed steel 1 Set

GLMFT1000/15 Flat track 30x10 mm L=1000 mm, in AISI 304, not drilled Polished steel 1 Pc

GLMFT1000/8 Flat track 30x10 mm L=1000 mm, in AISI 304, not drilled Brushed steel 1 Pc

GLMFT2000/15 Flat track 30x10 mm L=2000 mm, in AISI 304, not drilled Polished steel 1 Pc

GLMFT2000/8 Flat track 30x10 mm L=2000 mm, in AISI 304, not drilled Brushed steel 1 Pc

GLMFT3000/15 Flat track 30x10 mm L=3000 mm, in AISI 304, not drilled Polished steel 1 Pc

GLMFT3000/8 Flat track 30x10 mm L=3000 mm, in AISI 304, not drilled Brushed steel 1 Pc

GLMSFORO Hole and cut to measure 1 Pc

Art. Description Finish Q.ty EURO15,85

16,42

38,49

42,28

480,54

419,50

570,42

506,94

630,73

570,63

905,81

820,62

217,42

239,02

229,50

251,49

43,13

41,71

63,46

60,93

149,97

104,67

114,05

SYSTEMS FOR SHOWER PARTITIONS

Page 142 >>> CATALOGUE REFERENCE PAGE 718/720 >>>

GLMFT12/15 Eccentric sliding roller Ø 39 mm, AISI 304 Polished steel 1 Pc

GLMFT12/8 Eccentric sliding roller Ø 39 mm, AISI 304 Brushed steel 1 Pc

GLMFT14/15 Eccentric anti-derailment Ø 24 mm, AISI 304 Polished steel 1 Pc

GLMFT14/8 Eccentric anti-derailment Ø 24 mm, AISI 304 Brushed steel 1 Pc

GLMFT16/15 Fixed glass fi tting Ø 28 mm, AISI 304 Polished steel 1 Pc

GLMFT16/8 Fixed glass fi tting Ø 28 mm, AISI 304 Brushed steel 1 Pc

GLMFT18/15 Wall fi tting 40x34 mm, AISI 304 Polished steel 1 Pc

GLMFT18/8 Wall fi tting 40x34 mm, AISI 304 Brushed steel 1 Pc

GLMFT20/15 Stroke stop 57x17 mm, AISI 304 Polished steel 1 Pc

GLMFT20/8 Stroke stop 57x17 mm, AISI 304 Brushed steel 1 Pc

GLMFT37/15 Fitting for side locking of the fi xed side glass with the track, AISI 304 Polished steel 1 Pc

GLMFT37/8 Fitting for side locking of the fi xed side glass with the track, AISI 304 Brushed steel 1 Pc

GLMFT508/15 Glass fi tting with wide base Polished steel 1 Pc

GLMFT508/8 Glass fi tting with wide base Brushed steel 1 Pc

GLMFT90/15 Corner fi tting for 30x10 mm bar Polished steel 1 Pc

GLMFT90/8 Corner fi tting for 30x10 mm bar Brushed steel 1 Pc

PG03/8 3-way fi tting in AISI 304 for rectangular 30x10 mm tube sections Brushed steel 1 Pc

PG05/8 AISI 304 fi tting for fi xed glass and rectangular 30x10 mm tube section Brushed steel 1 Pc

PQ95/8 Square spacer for adjustable glass panes Brushed steel 1 Pc

PT105110/8 Adjustable spacer for glass panes Brushed steel 1 Pc

Art. Description Finish Q.ty EURO36,24

38,84

15,70

17,73

21,74

23,88

16,91

19,01

18,12

20,04

28,99

31,48

31,64

35,27

31,64

34,49

64,07

36,61

88,74

70,86

SYSTEMS FOR SHOWER PARTITIONS

Page 143 >>> CATALOGUE REFERENCE PAGE 721/722 >>>

DCC08/1 Floor guide with snap insertion in PBD profi le for 8 mm glass pane Chrome 1 Pc

DCC08/24 Floor guide with snap insertion in PBD profi le for 8 mm glass pane Stainless steel effect 1 Pc

DCC10/1 Floor guide with snap insertion in PBD profi le for 10 mm glass pane Chrome 1 Pc

DCC10/24 Floor guide with snap insertion in PBD profi le for 10 mm glass pane Stainless steel effect 1 Pc

DCC90/1 90° joint in zamak to be inserted in art. PBD3183 Chrome 1 Pc

DCC90/24 90° joint in zamak to be inserted in art. PBD3183 Stainless steel effect 1 Pc

DCC90/6 90° joint in zamak to be inserted in art. PBD3183 Matt black 1 Pc

GLMSPA06/8 Floor guide with steel seat for 6 mm glass panes Brushed steel 1 Pc

GLMSPA06/15 Floor guide with steel seat for 6 mm glass panes Polished steel 1 Pc

GLMSPA08/8 Floor guide with steel seat for 8 mm glass panes Brushed steel 1 Pc

GLMSPA08/15 Floor guide with steel seat for 8 mm glass panes Polished steel 1 Pc

GLMSPA10/8 Floor guide with steel seat for 10 mm glass panes Brushed steel 1 Pc

GLMSPA10/15 Floor guide with steel seat for 10 mm glass panes Polished steel 1 Pc

●PBD3183/91 U-shaped dam for shower partitions Length 3000 mm Polished aluminium 1 Pc

●PBD3183/88 U-shaped dam for shower partitions Length 3000 mm Brushed steel-effect aluminium 1 Pc

●PBD3183/97 U-shaped dam for shower partitions Length 3000 mm Matt aluminium 1 Pc

●PBD3183/6 U-shaped dam for shower partitions Length 3000 mm Matt black 1 Pc

●PBD3183.220/91 U-shaped dam for shower partitions Length 2200 mm Polished aluminium 1 Pc

●PBD3183.220/88 U-shaped dam for shower partitions Length 2200 mm Brushed steel-effect aluminium 1 Pc

●PBD3183.220/97 U-shaped dam for shower partitions Length 2200 mm Matt aluminium 1 Pc

●PBD3183.220/6 U-shaped dam for shower partitions Length 2200 mm Matt black 1 Pc

●PBD3184/91 Bevelled upper profi le Length 3000 mm Polished aluminium 1 Pc

●PBD3184/88 Bevelled upper profi le Length 3000 mm Brushed steel-effect aluminium 1 Pc

●PBD3184/97 Bevelled upper profi le Length 3000 mm Matt aluminium 1 Pc

●PBD3184/6 Bevelled upper profi le Length 3000 mm Matt black 1 Pc

PBD3184,150/91 Bevelled upper profi le Length 1498 mm Polished aluminium 1 Pc

PBD3184,150/88 Bevelled upper profi le Length 1498 mm Brushed steel-effect aluminium 1 Pc

PBD3184,150/97 Bevelled upper profi le Length 1498 mm Matt aluminium 1 Pc

PBD3184,150/6 Bevelled upper profi le Length 1498 mm Matt black 1 Pc

PBD3184,100/91 Bevelled upper profi le Length 992 mm Polished aluminium 1 Pc

PBD3184,100/88 Bevelled upper profi le Length 992 mm Brushed steel-effect aluminium 1 Pc

PBD3184,100/97 Bevelled upper profi le Length 992 mm Matt aluminium 1 Pc

PBD3184,100/6 Bevelled upper profi le Length 992 mm Matt black 1 Pc

GTUP2 Glass holder profi le - Thickness: 2 mm Transparent Per m

GTUP2G Glass holder profi le - Thickness: 2 mm Embossed Per m

GTUP4 Glass holder profi le - Thickness: 4 mm Transparent Per m

GTUP4G Glass holder profi le - Thickness: 4 mm Embossed Per m

GLMFT40/15 Glass fi tting for 30x10 mm track, AISI 304 Polished steel 1 Pc

GLMFT40/8 Glass fi tting for 30x10 mm track, AISI 304 Brushed steel 1 Pc

GLMFT30/15 Wall fi tting for GLMFT 36x30 mm track, 8/10 mm glass, AISI 304 Polished steel 1 Pc

GLMFT30/8 Wall fi tting for GLMFT 36x30 mm track, 8/10 mm glass, AISI 304 Brushed steel 1 Pc

Art. Description Finish Q.ty EURO25,20

22,35

25,20

22,35

20,07

24,98

27,26

24,41

26,69

24,41

26,69

24,41

26,69

40,87

36,88

34,01

98,51

34,49

27,70

25,63

64,43

29,30

20,92

19,40

89,97

22,63

18,44

17,68

52,97

17,75

14,96

14,45

37,97

0,86

1,25

1,20

1,60

57,68

62,50

15,85

16,42

SYSTEMS FOR SHOWER PARTITIONS

Page 144 >>> CATALOGUE REFERENCE PAGE 722/730 >>>

GLMFT50/15 Glass fitting for GLMFT 41x30 mm track, for 8/10 mm glass panes, AISI 304 Polished steel 1 Pc

GLMFT50/8 Glass fitting for GLMFT 41x30 mm track, for 8/10 mm glass panes, AISI 304 Brushed steel 1 Pc

GLMFT26/15 Fitting for fixed glass Polished steel 1 Pc

GLMFT26/8 Fitting for fixed glass Brushed steel 1 Pc

BDFIX-DX/15 Guide for right sliding shower partition, AISI 304 Polished steel 1 Pc

BDFIX-DX/8 Guide for right sliding shower partition, AISI 304 Brushed steel 1 Pc

BDFIX-SX/15 Guide for left sliding shower partition, AISI 304 Polished steel 1 Pc

BDFIX-SX/8 Guide for left sliding shower partition, AISI 304 Brushed steel 1 Pc

BDFIX2-DX/15 Guide for right sliding shower partition with seat for fixed glass, AISI 304 Polished steel 1 Pc

BDFIX2-DX/8 Guide for right sliding shower partition with seat for fixed glass, AISI 304 Brushed steel 1 Pc

BDFIX2-SX/15 Guide for left sliding shower partition with seat for fixed glass, AISI 304 Polished steel 1 Pc

BDFIX2-SX/8 Guide for left sliding shower partition with seat for fixed glass, AISI 304 Brushed steel 1 Pc

BDFIX5-DX/15 Guide for right sliding shower partition with seat for fixed side glass, AISI 304 Polished steel 1 Pc

BDFIX5-DX/8 Guide for right sliding shower partition with seat for fixed side glass, AISI 304 Brushed steel 1 Pc

BDFIX5-SX/15 Guide for left sliding shower partition with seat for fixed side glass, AISI 304 Polished steel 1 Pc

BDFIX5-SX/8 Guide for left sliding shower partition with seat for fixed side glass, AISI 304 Brushed steel 1 Pc

BDFIX7-DX/15 Guide for right sliding shower partition with fixed glass seat, AISI 304, 8 mm glass pane Polished steel 1 Pc

BDFIX7-DX/8 Guide for right sliding shower partition with fixed glass seat, AISI 304, 8 mm glass pane Brushed steel 1 Pc

BDFIX7-SX/15 Guide for left sliding shower partition with fixed glass seat, AISI 304, 8 mm glass pane Polished steel 1 Pc

BDFIX7-SX/8 Guide for left sliding shower partition with fixed glass seat, AISI 304, 8 mm glass pane Brushed steel 1 Pc

●BDFIX8/91 Dam to be inserted in series BDFIX profiles L=2000 mm Polished aluminium 1 Pc

BDFIX10/91 Dam to be inserted in series BDFIX profiles L=1000 mm Polished aluminium 1 Pc

GIUMAX FLAT KIT

GLMFLAT028DX/15 Model with rollers wall/wall, sliding right for 8 mm glass pane Polished steel 1 Set

GLMFLAT028DX/8 Model with rollers wall/wall, sliding right for 8 mm glass pane Brushed steel 1 Set

GLMFLAT028SX/15 Model with rollers wall/wall, sliding left for 8 mm glass pane Polished steel 1 Set

GLMFLAT028SX/8 Model with rollers wall/wall, sliding left for 8 mm glass pane Brushed steel 1 Set

GLMFLAT030/15 Model with rollers wall/wall for 8 mm glass pane Polished steel 1 Set

GLMFLAT030/8 Model with rollers wall/wall for 8 mm glass pane Brushed steel 1 Set

GLMFLAT032DX/15 Model with rollers wall/glass, sliding right for 8 mm glass pane Polished steel 1 Set

GLMFLAT032DX/8 Model with rollers wall/glass, sliding right for 8 mm glass pane Brushed steel 1 Set

GLMFLAT032SX/15 Model with rollers wall/glass, sliding left for 8 mm glass pane Polished steel 1 Set

GLMFLAT032SX/8 Model with rollers wall/glass, sliding left for 8 mm glass pane Brushed steel 1 Set

Art. Description Finish Q.ty EURO38,49

42,28

16,57

19,56

28,84

30,44

28,84

30,44

28,84

30,44

28,84

30,44

28,84

30,44

28,84

30,44

28,97

30,56

28,97

30,56

23,01

17,21

399,54

421,80

399,54

421,80

440,96

439,99

411,62

434,27

411,62

434,27

SYSTEMS FOR SHOWER PARTITIONS

Page 145 >>> CATALOGUE REFERENCE PAGE 731/737 >>>

GLMFLAT034/15 Model with rollers wall/glass for 8 mm glass pane Polished steel 1 Set

GLMFLAT034/8 Model with rollers wall/glass for 8 mm glass pane Brushed steel 1 Set

GLMFLAT036/15 Corner roller model with aligned glass panes for 8 mm glass pane Polished steel 1 Set

GLMFLAT036/8 Corner roller model with aligned glass panes for 8 mm glass pane Brushed steel 1 Set

GLMFLAT038/15 Corner roller model with aligned glass panes for 8 mm glass pane Polished steel 1 Set

GLMFLAT038/8 Corner roller model with aligned glass panes for 8 mm glass pane Brushed steel 1 Set

DOCCIA UV

DOCCIAUVMUR/15 DOCCIA UV Kit, wall/wall fitting in AISI 304 steel for 8/10 mm glass pane Polished steel 1 Set

DOCCIAUVMUR/8 DOCCIA UV Kit, wall/wall fitting in AISI 304 steel for 8/10 mm glass pane Brushed steel 1 Set

GLMFT1000/15 Flat track 30x10 mm L=1000 mm, in AISI 304 steel, not drilled Polished steel 1 Pc

GLMFT1000/8 Flat track 30x10 mm L=1000 mm, in AISI 304 steel, not drilled Brushed steel 1 Pc

GLMFT2000/15 Flat track 30x10 mm L=2000 mm, in AISI 304 steel, not drilled Polished steel 1 Pc

GLMFT2000/8 Flat track 30x10 mm L=2000 mm, in AISI 304 steel, not drilled Brushed steel 1 Pc

GLMFT3000/15 Flat track 30x10 mm L=3000 mm, in AISI 304 steel, not drilled Polished steel 1 Pc

GLMFT3000/8 Flat track 30x10 mm L=3000 mm, in AISI 304 steel, not drilled Brushed steel 1 Pc

GLMUVFORO Cutting and drilling for UV accessories 1 Pc

GABDOCCIAUV Template for DOCCIA UV 1 Pc

DOCCIA UV KIT

DOCCIAUV05/15 Model with rollers for wall/wall bonding for 8 mm glass pane Polished steel 1 Set

DOCCIAUV05/8 Model with rollers for wall/wall bonding for 8 mm glass pane Brushed steel 1 Set

Art. Description Finish Q.ty EURO515,15

505,79

695,17

737,35

805,54

818,21

216,80

223,87

43,13

41,71

63,46

60,93

149,97

104,67

72,99

18,61

548,61

532,54

SYSTEMS FOR SHOWER PARTITIONS

Page 146 >>> CATALOGUE REFERENCE PAGE 739/741 >>>

SHOWER PARTITIONS - GIUMAX - AISI 304 STAINLESS

GLM3000/9 Pair of Giumax 3000 carriages Machined steel (CNC) 1 Pair

GLM3000/15 Pair of Giumax 3000 carriages Polished steel 1 Pair

GLM7000/9 Giumax roller carriages 7000 Machined steel (CNC) 1 Set

GLM7000/15 Giumax roller carriages 7000 Polished steel 1 Set

GLM3020/9 Stroke stop Machined steel (CNC) 1 Pc

GLM3020/15 Stroke stop Polished steel 1 Pc

GLM3023/9 Oval stroke stop Machined steel (CNC) 1 Pc

GLM3023/15 Oval stroke stop Polished steel 1 Pc

GLMBDLN15/8 Round track max length 4000 mm Ø 20 mm Brushed steel Per m

GLMBDLN15/15 Round track max length 4000 mm Ø 20 mm Polished steel Per m

GLMBDLN30/8 Round track length 1500 mm Ø 20 mm with 1 hole at= 750 mm Brushed steel 1 Pc

GLMBDLN30/15 Round track length 1500 mm Ø 20 mm with 1 hole at= 750 mm Polished steel 1 Pc

GLMBDAN45/8 Round track length 1500 mm Ø 20 mm with 1 hole at= 420 mm Brushed steel 1 Pc

GLMBDAN45/15 Round track length 1500 mm Ø 20 mm with 1 hole at= 420 mm Polished steel 1 Pc

GLMBDAN60/8 Round track length 1000 mm Ø 20 mm with 1 hole at= 420 mm Brushed steel 1 Pc

GLMBDAN60/15 Round track length 1000 mm Ø 20 mm with 1 hole at= 420 mm Polished steel 1 Pc

GLMFORO Extra hole on the track 1 Pc

GLMBRM/9 Wall fitting Machined steel (CNC) 1 Pc

GLMBRM/15 Wall fitting Polished steel 1 Pc

GLMBRV/9 Glass fitting Machined steel (CNC) 1 Pc

GLMBRV/15 Glass fitting Polished steel 1 Pc

GLMRCT/9 Roller with trapezoidal groove Machined steel (CNC) 1 Pc

GLMRCT/15 Roller with trapezoidal groove Polished steel 1 Pc

GLMAN/9 Anti-derailment roller Machined steel (CNC) 1 Pc

GLMAN/15 Anti-derailment roller Polished steel 1 Pc

GLMDSTP/9 Side wall fitting Machined steel (CNC) 1 Pc

GLMDSTP/15 Side wall fitting Polished steel 1 Pc

Art. Description Finish Q.ty EURO

349,74

397,96

229,83

258,86

15,94

17,44

27,98

31,61

110,58

121,99

164,45

168,73

164,45

168,73

112,87

121,99

41,06

11,74

16,72

31,23

35,75

80,44

84,24

37,22

40,92

41,22

44,64

SYSTEMS FOR SHOWER PARTITIONS

Page 147 >>> CATALOGUE REFERENCE PAGE 741/745 >>>

GLMDSTV/9 Side glass fitting Machined steel (CNC) 1 Pc

GLMDSTV/15 Side glass fitting Polished steel 1 Pc

GLMSPA06/8 Floor guide with steel seat for 6 mm glass panes Brushed steel 1 Pc

GLMSPA06/15 Floor guide with steel seat for 6 mm glass panes Polished steel 1 Pc

GLMSPA08/8 Floor guide with steel seat for 8 mm glass panes Brushed steel 1 Pc

GLMSPA08/15 Floor guide with steel seat for 8 mm glass panes Polished steel 1 Pc

GLMSPA10/8 Floor guide with steel seat for 10 mm glass panes Brushed steel 1 Pc

GLMSPA10/15 Floor guide with steel seat for 10 mm glass panes Polished steel 1 Pc

GLMSST/9 Ceiling fitting Machined steel (CNC) 1 Pc

GLMSST/15 Ceiling fitting Polished steel 1 Pc

GLMSVF/9 Bracket for fixed glass suitable for GLM 3000 Machined steel (CNC) 1 Pc

GLMSVF/15 Bracket for fixed glass suitable for GLM 3000 Polished steel 1 Pc

LMDOCCIA

LMSD21MM/1 Complete accessories kit for wall/wall fixing, 8/10,76 mm glass pane Chrome 1 Set

LMSD21MM/6 Complete accessories kit for wall/wall fixing, 8/10,76 mm glass pane Matt black 1 Set

LMSD23MV/1 Complete accessories kit for wall/glass fixing, 8/10,76 mm glass pane Chrome 1 Set

LMSD23MV/6 Complete accessories kit for wall/glass fixing, 8/10,76 mm glass pane Matt black 1 Set

LMSD25VV/1 Complete accessories kit for glass/glass fixing, 8/10,76 mm glass pane Chrome 1 Set

LMSD25VV/6 Complete accessories kit for glass/glass fixing, 8/10,76 mm glass pane Matt black 1 Set

LMSD27MAM/1 Complete accessories kit for wall/corner/wall fixing, 8/10,76 mm glass pane Chrome 1 Set

LMSD27MAM/6 Complete accessories kit for wall/corner/wall fixing, 8/10,76 mm glass pane Matt black 1 Set

LMSD5015/91 Load bearing profile 50x50 mm length 1500 mm with seat for fixed glass Polished aluminium 1 Pc

LMSD5015/6 Load bearing profile 50x50 mm length 1500 mm with seat for fixed glass Matt black 1 Pc

LMSD5020/91 Load bearing profile 50x50 mm length 2000 mm with seat for fixed glass Polished aluminium 1 Pc

LMSD5020/6 Load bearing profile 50x50 mm length 2000 mm with seat for fixed glass Matt black 1 Pc

LMSD5030/91 Load bearing profile 50x50 mm length 3000 mm with seat for fixed glass Polished aluminium 1 Pc

LMSD5030/6 Load bearing profile 50x50 mm length 3000 mm with seat for fixed glass Matt black 1 Pc

●LMSD10015/91 LMSD100 cover 1500 mm length Polished aluminium 1 Pc

●LMSD10015/6 LMSD100 cover 1500 mm length Matt black 1 Pc

●LMSD10020/91 LMSD100 cover 2000 mm length Polished aluminium 1 Pc

●LMSD10020/6 LMSD100 cover 2000 mm length Matt black 1 Pc

●LMSD10030/91 LMSD100 cover 3000 mm length Polished aluminium 1 Pc

●LMSD10030/6 LMSD100 cover 3000 mm length Matt black 1 Pc

Art. Description Finish Q.ty EURO64,22

77,74

24,41

26,69

24,41

26,69

24,41

26,69

70,91

84,68

126,12

136,61

246,61

250,32

359,86

363,57

473,11

476,82

602,25

598,38

90,35

75,29

103,28

94,85

153,33

123,22

45,29

30,74

48,80

36,15

63,21

34,10

SYSTEMS FOR SHOWER PARTITIONS

Page 148 >>> CATALOGUE REFERENCE PAGE 745/746 >>>

●PBD3183/91 U-shaped dam for shower partitions Length 3000 mm Polished aluminium 1 Pc

●PBD3183/88 U-shaped dam for shower partitions Length 3000 mm Brushed steel-effect aluminium 1 Pc

●PBD3183/97 U-shaped dam for shower partitions Length 3000 mm Matt aluminium 1 Pc

●PBD3183/6 U-shaped dam for shower partitions Length 3000 mm Matt black 1 Pc

●PBD3183.220/91 U-shaped dam for shower partitions Length 2200 mm Polished aluminium 1 Pc

●PBD3183.220/88 U-shaped dam for shower partitions Length 2200 mm Brushed steel-effect aluminium 1 Pc

●PBD3183.220/97 U-shaped dam for shower partitions Length 2200 mm Matt aluminium 1 Pc

●PBD3183.220/6 U-shaped dam for shower partitions Length 2200 mm Matt black 1 Pc

●PBD3184/91 Bevelled upper profi le Length 3000 mm Polished aluminium 1 Pc

●PBD3184/88 Bevelled upper profi le Length 3000 mm Brushed steel-effect aluminium 1 Pc

●PBD3184/97 Bevelled upper profi le Length 3000 mm Matt aluminium 1 Pc

●PBD3184/6 Bevelled upper profi le Length 3000 mm Matt black 1 Pc

PBD3184,150/91 Bevelled upper profi le Length 1498 mm Polished aluminium 1 Pc

PBD3184,150/88 Bevelled upper profi le Length 1498 mm Brushed steel-effect aluminium 1 Pc

PBD3184,150/97 Bevelled upper profi le Length 1498 mm Matt aluminium 1 Pc

PBD3184,150/6 Bevelled upper profi le Length 1498 mm Matt black 1 Pc

PBD3184,100/91 Bevelled upper profi le Length 992 mm Polished aluminium 1 Pc

PBD3184,100/88 Bevelled upper profi le Length 992 mm Brushed steel-effect aluminium 1 Pc

PBD3184,100/97 Bevelled upper profi le Length 992 mm Matt aluminium 1 Pc

PBD3184,100/6 Bevelled upper profi le Length 992 mm Matt black 1 Pc

PBDTP/91 Cap for PBD profi le Polished aluminium 1 Pc

PBDTP/88 Cap for PBD profi le Brushed steel-effect aluminium 1 Pc

PBDTP/97 Cap for PBD profi le Matt aluminium 1 Pc

PBDTP/6 Cap for PBD profi le Matt black 1 Pc

GTUP2 Glass holder profi le - Thickness: 2 mm Transparent Per m

GTUP2300 Glass holder profi le pack 300 m Transparent 1 Set

GTUP3 Glass holder profi le - Thickness: 3 mm Transparent Per m

GTUP3250 Glass holder profi le pack 250 m Transparent 1 Set

GTUP4 Glass holder profi le - Thickness: 4 mm Transparent Per m

GTUP4160 Glass holder profi le pack 160 m Transparent 1 Set

GTUP2G Glass holder profi le - Thickness: 2 mm Embossed Per m

GTUP2300G Glass holder profi le pack 300 m Embossed 1 Set

GTUP3G Glass holder profi le - Thickness: 3 mm Embossed Per m

GTUP3250G Glass holder profi le pack 250 m Embossed 1 Set

GTUP4G Glass holder profi le - Thickness: 4 mm Embossed Per m

GTUP4160G Glass holder profi le pack 160 m Embossed 1 Set

LMC13.100/91 Finishing profi le LMC13 length 1000 mm Polished aluminium 1 Pc

LMC13.100/6 Finishing profi le LMC13 length 1000 mm Matt black 1 Pc

●LMC13.200/91 Finishing profi le LMC13 length 2000 mm Polished aluminium 1 Pc

●LMC13.200/6 Finishing profi le LMC13 length 2000 mm Matt black 1 Pc

DCC218/1 Floor guide with snap insertion in PBD profi le for 8mm glass Chrome 1 Pc

DCC218/6 Floor guide with snap insertion in PBD profi le for 8mm glass Matt black 1 Pc

DCC220/1 Floor guide with snap insertion in PBD profi le for 10mm glass Chrome 1 Pc

DCC220/6 Floor guide with snap insertion in PBD profi le for 10mm glass Matt black 1 Pc

Art. Description Finish Q.ty EURO40,87

36,88

34,01

98,51

34,49

27,70

25,63

64,43

29,30

20,92

19,40

89,97

22,63

18,44

17,68

52,97

17,75

14,96

14,45

37,97

11,97

11,97

6,39

8,78

0,86

256,61

0,97

242,35

1,20

191,60

1,25

376,35

1,43

356,40

1,60

255,46

16,97

11,94

27,10

17,05

24,29

31,70

24,29

31,70

SYSTEMS FOR SHOWER PARTITIONS

Page 149 >>> CATALOGUE REFERENCE PAGE 747/758 >>>

DCC90/1 90° joint in zamak to be inserted in art. PBD3183 Chrome 1 Pc

DCC90/24 90° joint in zamak to be inserted in art. PBD3183 Stainless steel effect 1 Pc

DCC90/6 90° joint in zamak to be inserted in art. PBD3183 Matt black 1 Pc

LMSTOP Oil soft braking mechanism 1 Pc

PBCAL10/91 Magnetic strike profi le, L=2300 mm, for 6/8 mm glass panes Polished aluminium 1 Set

LMDOCCIA KIT

LMDOCCIA01/91 Model with clamps and carriage wall/wall for 8 mm glass pane Polished aluminium 1 Set

LMDOCCIA01/6 Model with clamps and carriage wall/wall for 8 mm glass pane Matt black 1 Set

LMDOCCIA03/91 Model with clamps and carriage wall/glass for 8 mm glass pane Polished aluminium 1 Set

LMDOCCIA03/6 Model with clamps and carriage wall/glass for 8 mm glass pane Matt black 1 Set

LMDOCCIA05/91 Model with clamps and carriage glass/glass for 8 mm glass pane Polished aluminium 1 Set

LMDOCCIA05/6 Model with clamps and carriage glass/glass for 8 mm glass pane Matt black 1 Set

LMDOCCIA07/91 Model with clamps and carriage wall/corner/wall for 8 mm glass pane Polished aluminium 1 Set

LMDOCCIA07/6 Model with clamps and carriage wall/corner/wall for 8 mm glass pane Matt black 1 Set

NOVI3000 SYSTEMS FOR SHOWER PARTITIONS

NV3CZ/91 NOVI3000 Central mounting kit Polished aluminium 1 Set

NV3CZKR/1 NOVI3000 Central mounting kit Chrome 1 Set

NV3SX/91 NOVI3000 left mounting kit Polished aluminium 1 Set

NV3SXKR/1 NOVI3000 left mounting kit Chrome 1 Set

NV3DX/91 NOVI3000 right mounting kit Polished aluminium 1 Set

NV3DXKR/1 NOVI3000 right mounting kit Chrome 1 Set

Art. Description Finish Q.ty EURO20,07

24,98

27,26

44,46

111,68

486,00

506,78

626,44

667,82

766,55

830,10

996,81

1.058,86

235,19

359,53

223,34

348,58

223,34

348,58

SYSTEMS FOR SHOWER PARTITIONS

Page 150 >>> CATALOGUE REFERENCE PAGE 759/760 >>>

NV3100/91 Central upright L=3000 mm for NOVI 3000 kit Polished aluminium 1 Pc

NV3100KR/1 Central upright L=2947 mm for NOVI 3000 kit Chrome 1 Pc

NV3200 Kit of accessories for mounting central upright AISI304 steel 1 Set

NV3300/91 Side upright L=3000 mm for NOVI 3000 kit Polished aluminium 1 Pc

NV3300KR/1 Side upright L=2947 mm for NOVI 3000 kit Chrome 1 Pc

NV3400SX Kit of accessories for mounting left side upright AISI304 steel 1 Set

NV3400DX Kit of accessories for mounting right side upright AISI304 steel 1 Set

NV3500KR/1 Cover for upper bracket Chrome 1 Pc

NV3500/91 Cover for upper bracket Polished aluminium 1 Pc

PBD3184,100/97 Bevelled upper profile Length 992 mm Matt aluminium 1 Pc

PBD3184,100/88 Bevelled upper profile Length 992 mm Brushed steel-effect aluminium 1 Pc

PBD3184,100/91 Bevelled upper profile Length 992 mm Polished aluminium 1 Pc

PBD3184,150/97 Bevelled upper profile Length 1498 mm Matt aluminium 1 Pc

PBD3184,150/88 Bevelled upper profile Length 1498 mm Brushed steel-effect aluminium 1 Pc

PBD3184,150/91 Bevelled upper profile Length 1498 mm Polished aluminium 1 Pc

●PBD3184/97 Bevelled upper profile Length 3000 mm Matt aluminium 1 Pc

●PBD3184/88 Bevelled upper profile Length 3000 mm Brushed steel-effect aluminium 1 Pc

●PBD3184/91 Bevelled upper profile Length 3000 mm Polished aluminium 1 Pc

●PBD3184KR/1 Bevelled upper profile Length 2997 mm Chrome 1 Pc

●PBD3185/97 Side offsetting profile for fixed glass L. 3000 mm 15 x 16 mm Matt aluminium 1 Pc

●PBD3185/88 Side offsetting profile for fixed glass L. 3000 mm 15 x 16 mm Brushed steel-effect aluminium 1 Pc

●PBD3185/91 Side offsetting profile for fixed glass L. 3000 mm 15 x 16 mm Polished aluminium 1 Pc

●PBD3185KR/1 Side offsetting profile for fixed glass L. 3000 mm 15 x 16 mm Chrome 1 Pc

LMU20,150/97 “U” profile length 1498 mm Matt aluminium 1 Pc

LMU20,150/88 “U” profile length 1498 mm Brushed steel-effect aluminium 1 Pc

LMU20,150/91 “U” profile length 1498 mm Polished aluminium 1 Pc

●LMU20,300/97 “U” profile length 3000 mm Matt aluminium 1 Pc

●LMU20,300/88 “U” profile length 3000 mm Brushed steel-effect aluminium 1 Pc

●LMU20,300/91 “U” profile length 3000 mm Polished aluminium 1 Pc

●LMU20,300KR/1 “U” profile length 2997 mm Chrome 1 Pc

Art. Description Finish Q.ty EURO178,54

277,85

38,46

180,58

266,90

44,37

44,37

8,98

4,38

14,45

14,96

17,75

17,68

18,44

22,63

19,40

20,92

29,30

89,72

34,01

36,88

40,87

96,59

28,18

29,98

31,33

40,40

43,99

46,70

108,47

SYSTEMS FOR SHOWER PARTITIONS

Page 151 >>> CATALOGUE REFERENCE PAGE 761/769 >>>

GTUP2 Glass holder profile - Thickness: 2 mm Transparent Per m

GTUP2300 Glass holder profile pack 300 m Transparent 1 Set

GTUP4 Glass holder profile - Thickness: 4 mm Transparent Per m

GTUP4160 Glass holder profile pack 160 m Transparent 1 Set

GTUP2G Glass holder profile - Thickness: 2 mm Embossed Per m

GTUP2300G Glass holder profile pack 300 m Embossed 1 Set

GTUP4G Glass holder profile - Thickness: 4 mm Embossed Per m

GTUP4160G Glass holder profile pack 160 m Embossed 1 Set

NV3600 Kit with 3 self-tapping screws 1 Kit

SERIES HD SQUARE ADJUSTABLE HINGES WITH COVER

CER700UV/15 700 hinge for UV bonding with adjustable snap, side with pull opening Polished steel 1 Pc

CER700UV/8 700 hinge for UV bonding with adjustable snap, side with pull opening Brushed steel 1 Pc

CER720UV/15 720 hinge for UV bonding with adjustable snap, 180° with pull opening Polished steel 1 Pc

CER720UV/8 720 hinge for UV bonding with adjustable snap, 180° with pull opening Brushed steel 1 Pc

FXGAB01/8 Mounting template for items CER700UV and CER720UV Brushed steel 1 Pc

HD SQUARE SMALL SERIES HINGES 6/8 mm

DQ30COV/1 DQ30 hinge with plate without visible screws Chrome 1 Pc

DQ30COV/24 DQ30 hinge with plate without visible screws Brushed steel effect 1 Pc

DQ30COV/65 DQ30 hinge with plate without visible screws Matt black 1 Pc

DQ30COV/R2 DQ30 hinge with plate without visible screws RAL9005 Matt black 1 Pc

DQMP7/1 Spare plate with double sided adhesive tape 69.6 x 17.6 mm Chrome 1 Pc

DQMP7/24 Spare plate with double sided adhesive tape 69.6 x 17.6 mm Stainless steel effect 1 Pc

DQMP7/65 Spare plate with double sided adhesive tape 69.6 x 17.6 mm Matt black 1 Pc

DQMP7/R2 Spare plate with double sided adhesive tape 69.6 x 17.6 mm RAL9005 Matt black 1 Pc

DQ30/1 HD SQUARE series small adjustable side hinge for 6/8 mm glass panes Chrome 1 Pc

DQ30/24 HD SQUARE series small adjustable side hinge for 6/8 mm glass panes Stainless steel effect 1 Pc

DQ30/65 HD SQUARE series small adjustable side hinge for 6/8 mm glass panes Matt black 1 Pc

DQ30/R2 HD SQUARE series small adjustable side hinge for 6/8 mm glass panes RAL9005 Matt black 1 Pc

Art. Description Finish Q.ty EURO0,86

256,61

1,20

191,60

1,25

376,35

1,60

255,46

1,39

95,38

95,38

151,01

151,01

12,55

79,86

84,12

93,47

120,18

6,10

6,23

5,45

10,68

77,27

82,51

91,86

109,00

SYSTEMS FOR SHOWER PARTITIONS

Page 152 >>> CATALOGUE REFERENCE PAGE 770/774 >>>

DQ32/1 HD SQUARE small series adjustable central hinge for 6/8 mm glass panes Chrome 1 Pc

DQ32/24 HD SQUARE small series adjustable central hinge for 6/8 mm glass panes Stainless steel effect 1 Pc

DQ32/65 HD SQUARE small series adjustable central hinge for 6/8 mm glass panes Matt black 1 Pc

DQ32/R2 HD SQUARE small series adjustable central hinge for 6/8 mm glass panes RAL9005 Matt black 1 Pc

DQ390/1 HD SQUARE small series adjustable 90° hinge for 6/8 mm glass panes Chrome 1 Pc

DQ390/24 HD SQUARE small series adjustable 90° hinge for 6/8 mm glass panes Stainless steel effect 1 Pc

DQ390/65 HD SQUARE small series adjustable 90° hinge for 6/8 mm glass panes Matt black 1 Pc

DQ390/R2 HD SQUARE small series adjustable 90° hinge for 6/8 mm glass panes RAL9005 Matt black 1 Pc

DQ380/1 HD SQUARE small series adjustable in line hinge for 6/8 mm glass panes Chrome 1 Pc

DQ380/24 HD SQUARE small series adjustable in line hinge for 6/8 mm glass panes Stainless steel effect 1 Pc

DQ380/65 HD SQUARE small series adjustable in line hinge for 6/8 mm glass panes Matt black 1 Pc

DQ380/R2 HD SQUARE small series adjustable in line hinge for 6/8 mm glass panes RAL9005 Matt black 1 Pc

DQ3135/1 HD SQUARE small series adjustable 135° hinge for 6/8 mm glass panes Chrome 1 Pc

DQ3135/24 HD SQUARE small series adjustable 135° hinge for 6/8 mm glass panes Stainless steel effect 1 Pc

DQ37/1 HD SQUARE small adjustable in line hinge with wall plate for 6/8 mm glass panes Chrome 1 Pc

DQ37/24 HD SQUARE small adjustable in line hinge with wall plate for 6/8 mm glass panes Stainless steel effect 1 Pc

DQMP6/1 Spare plate with double sided adhesive tape 69.6 x 9.6 mm Chrome 1 Pc

DQMP6/24 Spare plate with double sided adhesive tape 69.6 x 9.6 mm Stainless steel effect 1 Pc

DQ375/1 HD SQUARE 135° small adjustable hinge with wall plate for 6/8 mm glass panes Chrome 1 Pc

DQ375/24 HD SQUARE 135° small adjustable hinge with wall plate for 6/8 mm glass panes Stainless steel effect 1 Pc

DQMP6/1 Spare plate with double sided adhesive tape 69.6 x 9.6 mm Chrome 1 Pc

DQMP6/24 Spare plate with double sided adhesive tape 69.6 x 9.6 mm Stainless steel effect 1 Pc

HD SQUARE SMALL SERIES LATCHES 6/8 mm

DQC35/1 HD SQUARE small series latch with knob/knob for 6/8 mm glass panes Chrome 1 Pc

DQC35/24 HD SQUARE small series latch with knob/knob for 6/8 mm glass panes Stainless steel effect 1 Pc

DQC37/1 HD SQUARE small series latch with knob/knob with handle for 6/8 mm glass panes Chrome 1 Pc

DQC37/24 HD SQUARE small series latch with knob/knob with handle for 6/8 mm glass panes Stainless steel effect 1 Pc

DQC38/1 HD SQUARE small series vacant/engaged privacy latch for 6/8 mm glass panes Chrome 1 Pc

DQC38/24 HD SQUARE small series vacant/engaged privacy latch for 6/8 mm glass panes Stainless steel effect 1 Pc

Art. Description Finish Q.ty EURO77,83

79,45

91,39

109,00

138,10

140,98

152,92

177,19

108,60

110,86

122,03

149,15

122,08

125,64

102,24

105,38

6,87

6,87

106,75

111,54

6,87

6,87

84,18

86,46

123,10

128,78

75,28

76,85

SYSTEMS FOR SHOWER PARTITIONS

Page 153 >>> CATALOGUE REFERENCE PAGE 775/779 >>>

DQC39/1 HD SQUARE small vacant/engaged privacy latch with handle 6/8 mm glass panes Chrome 1 Pc

DQC39/24 HD SQUARE small vacant/engaged privacy latch with handle 6/8 mm glass panes Stainless steel effect 1 Pc

DQC395/1 Keeper side plate for HD SQUARE small series locks for 6/8 mm glass panes Chrome 1 Pc

DQC395/24 Keeper side plate for HD SQUARE small series locks for 6/8 mm glass panes Stainless steel effect 1 Pc

SERIES HD SQUARE ADJUSTABLE HINGES WITH COVER

DQ40/1 HD SQUARE series adjustable side hinge for 8/12 mm glass panes Chrome 1 Pc

DQ40/24 HD SQUARE series adjustable side hinge for 8/12 mm glass panes Stainless steel effect 1 Pc

DQ42/1 HD SQUARE series central adjustable hinge for 8/12 mm glass panes Chrome 1 Pc

DQ42/24 HD SQUARE series central adjustable hinge for 8/12 mm glass panes Stainless steel effect 1 Pc

DQ490/1 HD SQUARE series 90° adjustable hinge for 8/12 mm glass panes Chrome 1 Pc

DQ490/24 HD SQUARE series 90° adjustable hinge for 8/12 mm glass panes Stainless steel effect 1 Pc

DQ480/1 HD SQUARE series adjustable in line hinge for 8/12 mm glass panes Chrome 1 Pc

DQ480/24 HD SQUARE series adjustable in line hinge for 8/12 mm glass panes Stainless steel effect 1 Pc

DQ4135/1 HD SQUARE series 135° adjustable hinge for 8/12 mm glass panes Chrome 1 Pc

DQ4135/24 HD SQUARE series 135° adjustable hinge for 8/12 mm glass panes Stainless steel effect 1 Pc

DQ475/1 HD SQUARE series adjustable in line hinge with wall plate for 10/12 mm glass panes Chrome 1 Pc

DQ475/24 HD SQUARE series adjustable in line hinge with wall plate for 10/12 mm glass panes Stainless steel effect 1 Pc

DQMP6/1 Spare plate with double sided adhesive tape 69.6 x 9.6 mm Chrome 1 Pc

DQMP6/24 Spare plate with double sided adhesive tape 69.6 x 9.6 mm Stainless steel effect 1 Pc

DQ497/1 HD SQUARE series 135° adjustable hinge with wall plate for 10/12 mm glass panes Chrome 1 Pc

DQ497/24 HD SQUARE series 135° adjustable hinge with wall plate for 10/12 mm glass panes Stainless steel effect 1 Pc

DQMP6/1 Spare plate with double sided adhesive tape 69.6 x 9.6 mm Chrome 1 Pc

DQMP6/24 Spare plate with double sided adhesive tape 69.6 x 9.6 mm Stainless steel effect 1 Pc

Art. Description Finish Q.ty EURO113,43

114,50

53,11

54,21

87,65

91,46

87,65

91,46

159,53

166,46

133,27

133,48

150,57

150,57

118,01

125,51

6,87

6,87

119,75

128,64

6,87

6,87

SYSTEMS FOR SHOWER PARTITIONS

Page 154 >>> CATALOGUE REFERENCE PAGE 781/784 >>>

HD SQUARE SERIES LATCHES WITH GLASS CUT-OUT

DQC51/1 HD SQUARE series latch with knob/lock for 10/12 mm glass panes Chrome 1 Pc

DQC51/24 HD SQUARE series latch with knob/lock for 10/12 mm glass panes Stainless steel effect 1 Pc

DQC53/1 HD SQUARE series latch with knob/lock with handle for 10/12 mm glass panes Chrome 1 Pc

DQC53/24 HD SQUARE series latch with knob/lock with handle for 10/12 mm glass panes Stainless steel effect 1 Pc

DQC55/1 HD SQUARE series latch with knob/knob for 10/12 mm glass panes Chrome 1 Pc

DQC55/24 HD SQUARE series latch with knob/knob for 10/12 mm glass panes Stainless steel effect 1 Pc

DQC575/1 HD SQUARE series latch with knob/knob with handle for 10/12 mm glass panes Chrome 1 Pc

DQC575/24 HD SQUARE series latch with knob/knob with handle for 10/12 mm glass panes Stainless steel effect 1 Pc

DQC58/1 HD SQUARE series vacant/engaged privacy latch for 10/12 mm glass panes Chrome 1 Pc

DQC58/24 HD SQUARE series vacant/engaged privacy latch for 10/12 mm glass panes Stainless steel effect 1 Pc

DQC59/1 HD SQUARE vacant/engaged privacy latch with handle for 10/12 mm glass panes Chrome 1 Pc

DQC59/24 HD SQUARE vacant/engaged privacy latch with handle for 10/12 mm glass panes Stainless steel effect 1 Pc

DQC61/1 Keeper side plate for HD SQUARE series locks for 10/12 mm glass panes Chrome 1 Pc

DQC61/24 Keeper side plate for HD SQUARE series locks for 10/12 mm glass panes Stainless steel effect 1 Pc

DQC63/1 HD SQUARE series bolt for 10/12 mm glass panes Chrome 1 Pc

DQC63/24 HD SQUARE series bolt for 10/12 mm glass panes Stainless steel effect 1 Pc

DQC65/1 Keeper side plate for HD SQUARE series bolt for 10/12 mm glass panes Chrome 1 Pc

DQC65/24 Keeper side plate for HD SQUARE series bolt for 10/12 mm glass panes Stainless steel effect 1 Pc

Art. Description Finish Q.ty EURO

97,66

99,70

137,09

140,72

83,68

83,34

120,81

123,33

78,84

79,71

106,82

103,59

52,39

53,48

81,90

81,90

60,45

60,45

SYSTEMS FOR SHOWER PARTITIONS

Page 155 >>> CATALOGUE REFERENCE PAGE 786/791 >>>

HD SQUARE SERIES CLAMPS 6/12 mm

DQM07/1 HD SQUARE series 80x40 mm 90° glass/glass clamp for 6/12 mm glass panes Chrome 1 Pc

DQM07/24 HD SQUARE series 80x40 mm 90° glass/glass clamp for 6/12 mm glass panes Stainless steel effect 1 Pc

DQM09/1 HD SQUARE series 80x40 mm wall/glass clamp for 6/12 mm glass panes Chrome 1 Pc

DQM09/24 HD SQUARE series 80x40 mm wall/glass clamp for 6/12 mm glass panes Stainless steel effect 1 Pc

DQM11/1 HD SQUARE series 80 x 28 mm wall/glass clamp Chrome 1 Pc

with slotted holes for 6/12 mm glass panes

DQM11/24 HD SQUARE series 80 x 28 mm wall/glass clamp Stainless steel effect 1 Pc

with slotted holes for 6/12 mm glass panes

DQM41/1 HD SQUARE series 1 wall/glass clamp for 6/12 mm glass panes Chrome 1 Pc

DQM41/24 HD SQUARE series 1 wall/glass clamp for 6/12 mm glass panes Stainless steel effect 1 Pc

DQM41/65 HD SQUARE series 1 wall/glass clamp for 6/12 mm glass panes Matt black 1 Pc

DQM41/R2 HD SQUARE series 1 wall/glass clamp for 6/12 mm glass panes RAL9005 Matt black 1 Pc

DQM43/1 HD SQUARE series 2 wall/glass clamp for 6/12 mm glass panes Chrome 1 Pc

DQM43/24 HD SQUARE series 2 wall/glass clamp for 6/12 mm glass panes Stainless steel effect 1 Pc

DQM43/65 HD SQUARE series 2 wall/glass clamp for 6/12 mm glass panes Matt black 1 Pc

DQM43/R2 HD SQUARE series 2 wall/glass clamp for 6/12 mm glass panes RAL9005 Matt black 1 Pc

DQM57/1 HD SQUARE series 40 x 20 mm wall/glass clamp for 6/12 mm glass panes Chrome 1 Pc

DQM57/24 HD SQUARE series 40 x 20 mm wall/glass clamp for 6/12 mm glass panes Stainless steel effect 1 Pc

DQM52/1 HD SQUARE series 40x40 mm wall/glass clamp for 6/12 mm glass panes Chrome 1 Pc

DQM52/24 HD SQUARE series 40x40 mm wall/glass clamp for 6/12 mm glass panes Stainless steel effect 1 Pc

DQM45/1 HD SQUARE series in line glass/glass clamp for 6/12 mm glass panes Chrome 1 Pc

DQM45/24 HD SQUARE series in line glass/glass clamp for 6/12 mm glass panes Stainless steel effect 1 Pc

DQM47/1 HD SQUARE series 40x40 mm 90° glass/glass clamp for 6/12 mm glass panes Chrome 1 Pc

DQM47/24 HD SQUARE series 40x40 mm 90° glass/glass clamp for 6/12 mm glass panes Stainless steel effect 1 Pc

DQM49/1 HD SQUARE series 40x40 mm 135° glass/glass clamp for 6/12 mm glass panes Chrome 1 Pc

DQM49/24 HD SQUARE series 40x40 mm 135° glass/glass clamp for 6/12 mm glass panes Stainless steel effect 1 Pc

DQM50/1 HD SQUARE series in line wall/glass clamp for 6/12 mm glass panes Chrome 1 Pc

DQM50/24 HD SQUARE series in line wall/glass clamp for 6/12 mm glass panes Stainless steel effect 1 Pc

Art. Description Finish Q.ty EURO

80,88

80,88

57,99

57,99

53,67

56,00

24,99

25,96

26,45

37,57

25,51

26,51

26,45

36,56

36,10

37,51

37,15

38,61

44,58

46,33

47,80

49,68

48,33

50,22

34,52

35,87

SYSTEMS FOR SHOWER PARTITIONS

Page 156 >>> CATALOGUE REFERENCE PAGE 792/794 >>>

DQM54/1 HD SQUARE series 135° wall/glass clamp for 6/12 mm glass panes Chrome 1 Pc

DQM54/24 HD SQUARE series 135° wall/glass clamp for 6/12 mm glass panes Stainless steel effect 1 Pc

DQMP2/1 Spare plate with double sided adhesive tape 29.6 x 29.6 mm Chrome 1 Pc

DQMP2/24 Spare plate with double sided adhesive tape 29.6 x 29.6 mm Stainless steel effect 1 Pc

DQMP4/1 Spare plate with double sided adhesive tape 29.6 x 9.6 mm Chrome 1 Pc

DQMP4/24 Spare plate with double sided adhesive tape 29.6 x 9.6 mm Stainless steel effect 1 Pc

DQMP6/1 Spare plate with double sided adhesive tape 69.6 x 9.6 mm Chrome 1 Pc

DQMP6/24 Spare plate with double sided adhesive tape 69.6 x 9.6 mm Stainless steel effect 1 Pc

DQMP7/1 Spare plate with double sided adhesive tape 69.6 x 17.6 mm Chrome 1 Pc

DQMP7/24 Spare plate with double sided adhesive tape 69.6 x 17.6 mm Stainless steel effect 1 Pc

HD SQUARE SERIES SAFETY RODS

DQT500/1 HD SQUARE wall/glass 500 mm rod with fixed wall fitting and low clamp Chrome 1 Pc

DQT500/24 HD SQUARE wall/glass 500 mm rod with fixed wall fitting and low clamp Stainless steel effect 1 Pc

DQT500/R2 HD SQUARE wall/glass 500 mm rod with fixed wall fitting and low clamp RAL9005 Matt black 1 Pc

DQT1000/1 HD SQUARE wall/glass 1000 mm rod with fixed wall fitting and low clamp Chrome 1 Pc

DQT1000/24 HD SQUARE wall/glass 1000 mm rod with fixed wall fitting and low clamp Stainless steel effect 1 Pc

DQT1000/R2 HD SQUARE wall/glass 1000 mm rod with fixed wall fitting and low clamp RAL9005 Matt black 1 Pc

DQT1500/1 HD SQUARE wall/glass 1500 mm rod with fixed wall fitting and low clamp Chrome 1 Pc

DQT1500/24 HD SQUARE wall/glass 1500 mm rod with fixed wall fitting and low clamp Stainless steel effect 1 Pc

DQT1500/R2 HD SQUARE wall/glass 1500 mm rod with fixed wall fitting and low clamp RAL9005 Matt black 1 Pc

DQX500/1 HD SQUARE wall/glass 500 mm rod with fixed wall fitting and high clamp Chrome 1 Pc

DQX500/24 HD SQUARE wall/glass 500 mm rod with fixed wall fitting and high clamp Stainless steel effect 1 Pc

DQX1000/1 HD SQUARE wall/glass 1000 mm rod with fixed wall fitting and high clamp Chrome 1 Pc

DQX1000/24 HD SQUARE wall/glass 1000 mm rod with fixed wall fitting and high clamp Stainless steel effect 1 Pc

DQX1500/1 HD SQUARE Wall/glass 1500 mm rod with fixed wall fitting and high clamp Chrome 1 Pc

DQX1500/24 HD SQUARE Wall/glass 1500 mm rod with fixed wall fitting and high clamp Stainless steel effect 1 Pc

DQA500/1 HD SQUARE series wall/glass 500 mm rod with wall-mounted joint Chrome 1 Pc

DQA500/24 HD SQUARE series wall/glass 500 mm rod with wall-mounted joint Stainless steel effect 1 Pc

DQA1000/1 HD SQUARE series wall/glass 1000 mm rod with wall-mounted joint Chrome 1 Pc

DQA1000/24 HD SQUARE series wall/glass 1000 mm rod with wall-mounted joint Stainless steel effect 1 Pc

DQA1500/1 HD SQUARE series wall/glass 1500 mm rod with wall-mounted joint Chrome 1 Pc

DQA1500/24 HD SQUARE series wall/glass 1500 mm rod with wall-mounted joint Stainless steel effect 1 Pc

Art. Description Finish Q.ty EURO37,67

39,15

4,58

4,58

4,07

4,07

6,87

6,87

6,10

6,23

88,67

102,22

134,20

108,28

122,18

148,79

136,42

186,60

168,40

97,96

110,83

117,57

130,79

145,71

195,22

120,00

132,53

139,61

152,50

167,76

216,92

SYSTEMS FOR SHOWER PARTITIONS

Page 157 >>> CATALOGUE REFERENCE PAGE 794/796 >>>

DQA55/1 HD SQUARE series wall/glass 500 mm rod with double joint Chrome 1 Pc

DQA55/24 HD SQUARE series wall/glass 500 mm rod with double joint Stainless steel effect 1 Pc

DQA55/R2 HD SQUARE series wall/glass 500 mm rod with double joint RAL9005 Matt black 1 Pc

DQA65/1 HD SQUARE series wall/glass 1000 mm rod with double joint Chrome 1 Pc

DQA65/24 HD SQUARE series wall/glass 1000 mm rod with double joint Stainless steel effect 1 Pc

DQA65/R2 HD SQUARE series wall/glass 1000 mm rod with double joint RAL9005 Matt black 1 Pc

DQA75/1 HD SQUARE series wall/glass 1500 mm rod with double joint Chrome 1 Pc

DQA75/24 HD SQUARE series wall/glass 1500 mm rod with double joint Stainless steel effect 1 Pc

DQA75/R2 HD SQUARE series wall/glass 1500 mm rod with double joint RAL9005 Matt black 1 Pc

COMPONENTS FOR HD SQUARE SERIES SAFETY RODS

DQA05/1 HD SQUARE series 500 mm rectangular rod Chrome 1 Pc

DQA05/24 HD SQUARE series 500 mm rectangular rod Stainless steel effect 1 Pc

DQA05/R2 HD SQUARE series 500 mm rectangular rod RAL9005 Matt black 1 Pc

DQA06/1 HD SQUARE series 1000 mm rectangular rod Chrome 1 Pc

DQA06/24 HD SQUARE series 1000 mm rectangular rod Stainless steel effect 1 Pc

DQA06/R2 HD SQUARE series 1000 mm rectangular rod RAL9005 Matt black 1 Pc

DQA08/1 HD SQUARE series 1500 mm rectangular rod Chrome 1 Pc

DQA08/24 HD SQUARE series 1500 mm rectangular rod Stainless steel effect 1 Pc

DQA08/R2 HD SQUARE series 1500 mm rectangular rod RAL9005 Matt black 1 Pc

DQA83/1 HD SQUARE series in line glass fitting with fixed clamp Chrome 1 Pc

DQA83/24 HD SQUARE series in line glass fitting with fixed clamp Stainless steel effect 1 Pc

DQA85/1 HD SQUARE series glass fitting with swivel clamp Chrome 1 Pc

DQA85/24 HD SQUARE series glass fitting with swivel clamp Stainless steel effect 1 Pc

DQA85/65 HD SQUARE series glass fitting with swivel clamp Matt black 1 Pc

DQA85/R2 HD SQUARE series glass fitting with swivel clamp RAL9005 Matt black 1 Pc

DQA86/1 HD SQUARE series glass fitting with fixed clamp, L 25x25 mm H 40 mm Chrome 1 Pc

DQA86/24 HD SQUARE series glass fitting with fixed clamp, L 25x25 mm H 40 mm Stainless steel effect 1 Pc

DQA86/65 HD SQUARE series glass fitting with fixed clamp, L 25x25 mm H 40 mm Matt black 1 Pc

DQA86/R2 HD SQUARE series glass fitting with fixed clamp, L 25x25 mm H 40 mm RAL9005 Matt black 1 Pc

DQA8670/1 HD SQUARE series glass fitting with fixed clamp, L 25x25 mm H 67 mm Chrome 1 Pc

DQA8670/24 HD SQUARE series glass fitting with fixed clamp, L 25x25 mm H 67 mm Stainless steel effect 1 Pc

DQA87/1 HD SQUARE series glass through fitting with fixed clamp Chrome 1 Pc

DQA87/24 HD SQUARE series glass through fitting with fixed clamp Stainless steel effect 1 Pc

DQA90/1 HD SQUARE series side through fitting with articulated clamp Chrome 1 Pc

DQA90/24 HD SQUARE series side through fitting with articulated clamp Stainless steel effect 1 Pc

Art. Description Finish Q.ty EURO138,79

150,64

219,35

158,40

170,61

233,94

186,54

235,03

253,55

21,12

34,67

24,63

40,73

54,63

39,22

68,87

119,05

58,83

35,13

35,13

52,22

52,22

56,29

91,25

33,44

34,11

35,81

55,34

42,73

42,73

33,23

33,23

67,14

65,11

SYSTEMS FOR SHOWER PARTITIONS

Page 158 >>> CATALOGUE REFERENCE PAGE 797/799 >>>

DQA93/1 HD SQUARE series fixed wall fitting Chrome 1 Pc

DQA93/24 HD SQUARE series fixed wall fitting Stainless steel effect 1 Pc

DQA93/65 HD SQUARE series fixed wall fitting Matt black 1 Pc

DQA93/R2 HD SQUARE series fixed wall fitting RAL9005 Matt black 1 Pc

DQA88/1 HD SQUARE series articulated wall fitting Chrome 1 Pc

DQA88/24 HD SQUARE series articulated wall fitting Stainless steel effect 1 Pc

DQA88/65 HD SQUARE series articulated wall fitting Matt black 1 Pc

DQA88/R2 HD SQUARE series articulated wall fitting RAL9005 Matt black 1 Pc

DQA89/1 HD SQUARE series swivel glass fitting Chrome 1 Pc

DQA89/24 HD SQUARE series swivel glass fitting Stainless steel effect 1 Pc

DQA99/1 HD SQUARE series swivel fittings Chrome 1 Pc

DQA99/24 HD SQUARE series swivel fittings Stainless steel effect 1 Pc

HD SQUARE SERIES FIXTURES AND KNOBS

DQP365/1 HD SQUARE series 500 towel holder Chrome 1 Pc

DQP365/24 HD SQUARE series 500 towel holder Stainless steel effect 1 Pc

DQP375/1 HD SQUARE series towel holder with knob Chrome 1 Pc

DQP375/24 HD SQUARE series towel holder with knob Stainless steel effect 1 Pc

DQP385/1 HD SQUARE series glass fitting towel hook Chrome 1 Pc

DQP385/24 HD SQUARE series glass fitting towel hook Stainless steel effect 1 Pc

DQTS2525/1 Pair of brass knobs with grip 25x25x25 Chrome 1 Pair

DQTS2525/24 Pair of brass knobs with grip 25x25x25 Brushed nickel 1 Pair

DQP2525/1 Pair of brass knobs 25x25x25 mm Chrome 1 Pair

DQP2525/3 Pair of brass knobs 25x25x25 mm Brushed nickel 1 Pair

DQP2525/65 Pair of brass knobs 25x25x25 mm Matt black 1 Pair

DQP2525/R2 Pair of brass knobs 25x25x25 mm RAL9005 Matt black 1 Pair

POM2525/1 Pair of brass knobs 25x25x43 mm Chrome 1 Pair

POM2525/3 Pair of brass knobs 25x25x43 mm Brushed nickel 1 Pair

POM2525/65 Pair of brass knobs 25x25x43 mm Matt black 1 Pair

POM2525/R2 Pair of brass knobs 25x25x43 mm RAL9005 Matt black 1 Pair

Art. Description Finish Q.ty EURO34,11

33,44

38,86

54,22

65,45

63,75

70,20

103,46

75,28

75,28

76,64

76,64

100,67

132,81

105,49

141,25

47,33

55,31

36,75

36,75

34,05

34,05

32,97

56,32

38,91

38,37

41,07

60,92

SYSTEMS FOR SHOWER PARTITIONS

Page 159 >>> CATALOGUE REFERENCE PAGE 804/809 >>>

HD SMALL SERIES ADJUSTABLE HINGES WITH COVER

CHD10/1 HD small series adjustable side hinge with cover for 6/8 mm glass panes Chrome 1 Pc

CHD10/24 HD small series adjustable side hinge with cover for 6/8 mm glass panes Stainless steel effect 1 Pc

CHD12/1 HD small series adjustable central hinge with cover for 6/8 mm glass panes Chrome 1 Pc

CHD12/24 HD small series adjustable central hinge with cover for 6/8 mm glass panes Stainless steel effect 1 Pc

CHD190/1 HD small series adjustable 90° hinge with cover for 6/8 mm glass panes Chrome 1 Pc

CHD190/24 HD small series adjustable 90° hinge with cover for 6/8 mm glass panes Stainless steel effect 1 Pc

CHD180/1 HD small series adjustable in line hinge with cover for 6/8 mm glass panes Chrome 1 Pc

CHD180/24 HD small series adjustable in line hinge with cover for 6/8 mm glass panes Stainless steel effect 1 Pc

CHD1135/1 HD small series adjustable 135° hinge with cover for 6/8 mm glass panes Chrome 1 Pc

CHD1135/24 HD small series adjustable 135° hinge with cover for 6/8 mm glass panes Stainless steel effect 1 Pc

HD SERIES ADJUSTABLE HINGES WITH COVER

CHD20/1 HD series adjustable side hinge with cover for 8/10 mm glass panes Chrome 1 Pc

CHD20/24 HD series adjustable side hinge with cover for 8/10 mm glass panes Stainless steel effect 1 Pc

CHD22/1 HD series adjustable central hinge with cover for 8/10 mm glass panes Chrome 1 Pc

CHD22/24 HD series adjustable central hinge with cover for 8/10 mm glass panes Stainless steel effect 1 Pc

CHD290/1 HD series adjustable 90° hinge with cover for 8/10 mm glass panes Chrome 1 Pc

CHD290/24 HD series adjustable 90° hinge with cover for 8/10 mm glass panes Stainless steel effect 1 Pc

CHD280/1 HD series adjustable in line hinge with cover for 8/10 mm glass panes Chrome 1 Pc

CHD280/24 HD series adjustable in line hinge with cover for 8/10 mm glass panes Stainless steel effect 1 Pc

Art. Description Finish Q.ty EURO

71,09

75,16

76,55

78,15

116,99

124,10

102,75

102,30

113,43

115,80

82,91

84,64

84,44

88,79

153,62

156,82

123,61

129,82

SYSTEMS FOR SHOWER PARTITIONS

Page 160 >>> CATALOGUE REFERENCE PAGE 809/813 >>>

CHD2135/1 HD series adjustable 135° hinge with cover for 8/10 mm glass panes Chrome 1 Pc

CHD2135/24 HD series adjustable 135° hinge with cover for 8/10 mm glass panes Stainless steel effect 1 Pc

HD SERIES 6/12 mm CLAMPS

CHDM41/1 Wall/glass fixing clamp with 1 fixing point, HD series 6/12 mm glass panes Chrome 1 Pc

CHDM41/24 Wall/glass fixing clamp with 1 fixing point, HD series 6/12 mm glass panes Stainless steel effect 1 Pc

CHDM43/1 Wall/glass fixing clamp with 2 fixing points, HD series 6/12 mm glass panes Chrome 1 Pc

CHDM43/24 Wall/glass fixing clamp with 2 fixing points, HD series 6/12 mm glass panes Stainless steel effect 1 Pc

CHDM45/1 Glass/glass in line fixing clamp, HD series for 6/12 mm glass panes Chrome 1 Pc

CHDM45/24 Glass/glass in line fixing clamp, HD series for 6/12 mm glass panes Stainless steel effect 1 Pc

CHDM47/1 Glass/glass fixing clamp at 90°, HD series for 6/12 mm glass panes Chrome 1 Pc

CHDM47/24 Glass/glass fixing clamp at 90°, HD series for 6/12 mm glass panes Stainless steel effect 1 Pc

CHDM57/1 Wall/glass fixing clamp with 25 mm fin, HD series for 6/12 mm glass panes Chrome 1 Pc

CHDM57/24 Wall/glass fixing clamp with 25 mm fin, HD series for 6/12 mm glass panes Stainless steel effect 1 Pc

CHDM52/1 Wall/glass fixing clamp with 51 mm fin, HD series for 6/12 mm glass panes Chrome 1 Pc

CHDM52/24 Wall/glass fixing clamp with 51 mm fin, HD series for 6/12 mm glass panes Stainless steel effect 1 Pc

HD SERIES SAFETY RODS 6/12 mm

CHDA500/1 HD series wall/glass 500 mm rod with wall-mounted joint 6/8 mm glass panes Chrome 1 Pc

CHDA500/24 HD series wall/glass 500 mm rod with wall-mounted joint 6/8 mm glass panes Stainless steel effect 1 Pc

CHDA1000/1 HD series wall/glass 1000 mm rod with wall-mounted joint 6/8 mm glass panes Chrome 1 Pc

CHDA1000/24 HD series wall/glass 1000 mm rod with wall-mounted joint 6/8 mm glass panes Stainless steel effect 1 Pc

CHDA1500/1 HD series wall/glass 1500 mm rod with wall-mounted joint 6/8 mm glass panes Chrome 1 Pc

CHDA1500/24 HD series wall/glass 1500 mm rod with wall-mounted joint 6/8 mm glass panes Stainless steel effect 1 Pc

CHDA500G/1 HD series wall/glass 500 mm rod with wall-mounted joint 10/12 mm glass panes Chrome 1 Pc

CHDA500G/24 HD series wall/glass 500 mm rod with wall-mounted joint for 10/12 mm glass panes Stainless steel effect 1 Pc

CHDA1000G/1 HD series wall/glass 1000 mm rod with wall-mounted joint for 10/12 mm glass panes Chrome 1 Pc

CHDA1000G/24 HD series wall/glass 1000 mm rod with wall-mounted joint for 10/12 mm glass panes Stainless steel effect 1 Pc

CHDA1500G/1 HD series wall/glass 1500 mm rod with wall-mounted joint for 10/12 mm glass panes Chrome 1 Pc

CHDA1500G/24 HD series wall/glass 1500 mm rod with wall-mounted joint for 10/12 mm glass panes Stainless steel effect 1 Pc

Art. Description Finish Q.ty EURO135,31

138,12

23,65

24,15

24,92

25,44

37,13

37,91

40,69

41,54

31,54

32,19

31,54

32,19

114,69

128,23

134,36

148,26

162,61

212,79

115,36

128,91

135,03

148,93

163,29

213,47

SYSTEMS FOR SHOWER PARTITIONS

Page 161 >>> CATALOGUE REFERENCE PAGE 814/816 >>>

CHDA55/1 HD series wall/glass 500 mm rod with double joint 6/8 mm glass panes Chrome 1 Pc

CHDA55/24 HD series wall/glass 500 mm rod with double joint 6/8 mm glass panes Stainless steel effect 1 Pc

CHDA65/1 HD series wall/glass 1000 mm rod with double joint 6/8 mm glass panes Chrome 1 Pc

CHDA65/24 HD series wall/glass 1000 mm rod with double joint 6/8 mm glass panes Stainless steel effect 1 Pc

CHDA75/1 HD series wall/glass 1500 mm rod with double joint 6/8 mm glass panes Chrome 1 Pc

CHDA75/24 HD series wall/glass 1500 mm rod with double joint 6/8 mm glass panes Stainless steel effect 1 Pc

CHDA55G/1 HD series wall/glass 500 mm rod with double joint 10/12 mm glass panes Chrome 1 Pc

CHDA55G/24 HD series wall/glass 500 mm rod with double joint 10/12 mm glass panes Stainless steel effect 1 Pc

CHDA65G/1 HD series wall/glass 1000 mm rod with double joint 10/12 mm glass panes Chrome 1 Pc

CHDA65G/24 HD series wall/glass 1000 mm rod with double joint 10/12 mm glass panes Stainless steel effect 1 Pc

CHDA75G/1 HD series wall/glass 1500 mm rod with double joint 10/12 mm glass panes Chrome 1 Pc

CHDA75G/24 HD series wall/glass 1500 mm rod with double joint 10/12 mm glass panes Stainless steel effect 1 Pc

CHDT500/1 HD series wall/glass 500 mm rod with fixed fitting 6/8 mm glass panes Chrome 1 Pc

CHDT500/24 HD series wall/glass 500 mm rod with fixed fitting 6/8 mm glass panes Stainless steel effect 1 Pc

CHDT1000/1 HD series wall/glass 1000 mm rod with fixed fitting 6/8 mm glass panes Chrome 1 Pc

CHDT1000/24 HD series wall/glass 1000 mm rod with fixed fitting 6/8 mm glass panes Stainless steel effect 1 Pc

CHDT1500/1 HD series wall/glass 1500 mm rod with fixed fitting 6/8 mm glass panes Chrome 1 Pc

CHDT1500/24 HD series wall/glass 1500 mm rod with fixed fitting 6/8 mm glass panes Stainless steel effect 1 Pc

CHDT500G/1 HD series wall/glass 500 mm rod with fixed fitting 10/12 mm glass panes Chrome 1 Pc

CHDT500G/24 HD series wall/glass 500 mm rod with fixed fitting 10/12 mm glass panes Stainless steel effect 1 Pc

CHDT1000G/1 HD series wall/glass 1000 mm rod with fixed fitting 10/12 mm glass panes Chrome 1 Pc

CHDT1000G/24 HD series wall/glass 1000 mm rod with fixed fitting 10/12 mm glass panes Stainless steel effect 1 Pc

CHDT1500G/1 HD series wall/glass 1500 mm rod with fixed fitting 10/12 mm glass panes Chrome 1 Pc

CHDT1500G/24 HD series wall/glass 1500 mm rod with fixed fitting 10/12 mm glass panes Stainless steel effect 1 Pc

CHDA05/1 HD SERIES 500 mm elliptical rod Chrome 1 Pc

CHDA05/24 HD SERIES 500 mm elliptical rod Stainless steel effect 1 Pc

CHDA06/1 HD SERIES 1000 mm elliptical rod Chrome 1 Pc

CHDA06/24 HD SERIES 1000 mm elliptical rod Stainless steel effect 1 Pc

CHDA08/1 HD SERIES 1500 mm elliptical rod Chrome 1 Pc

CHDA08/24 HD SERIES 1500 mm elliptical rod Stainless steel effect 1 Pc

CHDA83/1 HD series glass in line through fitting with fixed clamp for 6/8 mm glass panes Chrome 1 Pc

CHDA83/24 HD series glass in line through fitting with fixed clamp for 6/8 mm glass panes Stainless steel effect 1 Pc

CHDA831/1 HD series glass in line through fitting with fixed clamp for 10/12 mm glass panes Chrome 1 Pc

CHDA831/24 HD series glass in line through fitting with fixed clamp for 10/12 mm glass panes Stainless steel effect 1 Pc

CHDA85/1 HD series glass fitting with swivel clamp for 6/8 mm glass panes Chrome 1 Pc

CHDA85/24 HD series glass fitting with swivel clamp for 6/8 mm glass panes Stainless steel effect 1 Pc

CHDA851/1 HD series glass fitting with swivel clamp for 10/12 mm glass panes Chrome 1 Pc

CHDA851/24 HD series glass fitting with swivel clamp for 10/12 mm glass panes Stainless steel effect 1 Pc

CHDA86/1 HD series glass fitting with fixed clamp for 6/8 mm glass panes Chrome 1 Pc

CHDA86/24 HD series glass fitting with fixed clamp for 6/8 mm glass panes Stainless steel effect 1 Pc

CHDA861/1 HD series glass fitting with fixed clamp for 10/12 mm glass panes Chrome 1 Pc

CHDA861/24 HD series glass fitting with fixed clamp for 10/12 mm glass panes Stainless steel effect 1 Pc

CHDA90/1 HD series side through fitting with articulated clamp for 6/8 mm glass panes Chrome 1 Pc

CHDA90/24 HD series side through fitting with articulated clamp for 6/8 mm glass panes Stainless steel effect 1 Pc

CHDA901/1 HD series side through fitting with articulated clamp for 10/12 mm glass panes Chrome 1 Pc

CHDA901/24 HD series side through fitting with articulated clamp for 10/12 mm glass panes Stainless steel effect 1 Pc

Art. Description Finish Q.ty EURO141,27

154,82

160,94

174,84

189,19

239,38

141,95

155,50

161,62

175,52

189,87

240,05

95,70

109,24

115,37

129,27

143,62

193,80

96,37

109,92

116,04

129,94

144,30

194,48

21,23

34,78

40,90

54,80

69,15

119,33

40,56

40,56

41,24

41,24

67,14

67,14

67,82

67,82

40,56

40,56

41,24

41,24

71,21

71,21

71,89

71,89

SYSTEMS FOR SHOWER PARTITIONS

Page 162 >>> CATALOGUE REFERENCE PAGE 816/823 >>>

CHDA93/1 HD series fixed wall fitting Chrome 1 Pc

CHDA93/24 HD series fixed wall fitting Stainless steel effect 1 Pc

CHDA88/1 HD series articulated wall fitting Chrome 1 Pc

CHDA88/24 HD series articulated wall fitting Stainless steel effect 1 Pc

700 SNAP HINGES

CER700/1 700 adjustable side snap hinge with pull opening L 58x H 80 mm Chrome 1 Pc

CER700/3 700 adjustable side snap hinge with pull opening L 58x H 80 mm Brushed nickel 1 Pc

CER720/1 720 adjustable 180° snap hinge with pull opening L108.5 x H 80 mm Chrome 1 Pc

CER720/3 720 adjustable 180° snap hinge with pull opening L108.5 x H 80 mm Brushed nickel 1 Pc

400 SMALL ADJUSTABLE SNAP HINGES

S150/1 400 Small series adjustable side hinge for 6/8 mm glass panes Chrome 1 Pc

S150/24 400 Small series adjustable side hinge for 6/8 mm glass panes Stainless steel effect 1 Pc

S153/1 400 Small series adjustable central hinge for 6/8 mm glass panes Chrome 1 Pc

S153/24 400 Small series adjustable central hinge for 6/8 mm glass panes Stainless steel effect 1 Pc

S190/1 400 Small series adjustable 90° hinge for 6/8 mm glass panes Chrome 1 Pc

S190/24 400 Small series adjustable 90° hinge for 6/8 mm glass panes Stainless steel effect 1 Pc

S1180/1 400 Small series adjustable in line glass/glass hinge for 6/8 mm glass panes Chrome 1 Pc

S1180/24 400 Small series adjustable in line glass/glass hinge for 6/8 mm glass panes Stainless steel effect 1 Pc

600 ADJUSTABLE SNAP HINGES

S600/1 600 series adjustable side hinge for 8/12 mm glass panes Chrome 1 Pc

S600/24 600 series adjustable side hinge for 8/12 mm glass panes Stainless steel effect 1 Pc

S603/1 600 series adjustable central hinge for 8/12 mm glass panes Chrome 1 Pc

S603/24 600 series adjustable central hinge for 8/12 mm glass panes Stainless steel effect 1 Pc

Art. Description Finish Q.ty EURO33,91

33,91

52,90

52,90

83,42

90,87

138,87

140,20

62,57

64,11

61,93

64,51

107,33

108,62

88,76

89,02

94,10

98,02

92,58

98,02

SYSTEMS FOR SHOWER PARTITIONS

Page 163 >>> CATALOGUE REFERENCE PAGE 824/828 >>>

S690/1 600 series adjustable 90° hinge for 8/12 mm glass panes Chrome 1 Pc

S690/24 600 series adjustable 90° hinge for 8/12 mm glass panes Stainless steel effect 1 Pc

S6180/1 600 series adjustable in line glass/glass hinge for 8/12 mm glass panes Chrome 1 Pc

S6180/24 600 series adjustable in line glass/glass hinge for 8/12 mm glass panes Stainless steel effect 1 Pc

42KG ADJUSTABLE PIVOT HINGES

S4500/1 400 series adjustable pivot hinge Chrome 1 Pc

S4500/3 400 series adjustable pivot hinge Brushed nickel 1 Pc

S4505R/1 400 series adjustable right pivot hinge Chrome 1 Pc

S4505R/3 400 series adjustable right pivot hinge Brushed nickel 1 Pc

S4506L/1 400 series adjustable left pivot hinge Chrome 1 Pc

S4506L/3 400 series adjustable left pivot hinge Brushed nickel 1 Pc

S4503/1 400 series glass/glass hinge for 8/10 mm glass panes Chrome 1 Pc

S4503/3 400 series glass/glass hinge for 8/10 mm glass panes Brushed nickel 1 Pc

400 SERIES CLAMPS

S4001/1 400 series wall/glass clamp 1 Chrome 1 Pc

S4001/24 400 series wall/glass clamp 1 Stainless steel effect 1 Pc

S4003/1 400 series wall/glass clamp 2 Chrome 1 Pc

S4003/24 400 series wall/glass clamp 2 Stainless steel effect 1 Pc

S4005/1 400 series glass/glass in line clamp Chrome 1 Pc

S4005/24 400 series glass/glass in line clamp Stainless steel effect 1 Pc

S4007/1 400 series glass/glass 90° clamp Chrome 1 Pc

S4007/24 400 series glass/glass 90° clamp Stainless steel effect 1 Pc

S4009/1 400 series glass/glass 135° clamp L 51+51 x H 44.5 mm Chrome 1 Pc

S4009/24 400 series glass/glass 135° clamp L 51+51 x H 44.5 mm Stainless steel effect 1 Pc

S4011/1 400 series glass/wall in line clamp L 95 x H 44.5 mm Chrome 1 Pc

S4011/24 400 series glass/wall in line clamp L 95 x H 44.5 mm Stainless steel effect 1 Pc

S4013/1 400 series glass/wall 90° clamp L 51+51 x H 44.5 mm Chrome 1 Pc

S4013/24 400 series glass/wall 90° clamp L 51+51 x H 44.5 mm Stainless steel effect 1 Pc

S4020/1 400 series glass/wall 90° clamp L 51+20 x H 44.5 mm Chrome 1 Pc

S4020/24 400 series glass/wall 90° clamp L 51+20 x H 44.5 mm Stainless steel effect 1 Pc

S4015/1 400 series glass/wall 135° clamp L 51+51 x H 44.5 mm Chrome 1 Pc

S4015/24 400 series glass/wall 135° clamp L 51+51 x H 44.5 mm Stainless steel effect 1 Pc

Art. Description Finish Q.ty EURO161,76

165,85

156,16

161,61

85,97

89,55

99,96

104,13

99,96

104,13

122,96

128,08

17,49

18,12

18,95

19,63

35,80

37,69

36,39

37,69

38,14

39,50

25,07

25,97

25,66

26,57

26,82

27,78

27,41

28,39

SYSTEMS FOR SHOWER PARTITIONS

Page 164 >>> CATALOGUE REFERENCE PAGE 829/835 >>>

400 SERIES LOCKS WITH GLASS CUT-OUT

CSP75/1 400 series lock/knob lock H 90 x L 55 mm Chrome 1 Pc

CSP75/24 400 series lock/knob lock H 90 x L 55 mm Stainless steel effect 1 Pc

CSP85/1 400 series lock/knob lock with handle H 90 x L 55 mm Chrome 1 Pc

CSP85/24 400 series lock/knob lock with handle H 90 x L 55 mm Stainless steel effect 1 Pc

400 SERIES LATCHES WITH GLASS CUT-OUT

CLP23/1 400 series double knob latch H 90 x L 55 mm Chrome 1 Pc

CLP23/24 400 series double knob latch H 90 x L 55 mm Stainless steel effect 1 Pc

CLPM29/1 400 series double knob latch with handle H 90 x L 55 mm Chrome 1 Pc

CLPM29/24 400 series double knob latch with handle H 90 x L 55 mm Stainless steel effect 1 Pc

CLS18/1 400 series vacant/engaged privacy latch H 90 x L 55 mm Chrome 1 Pc

CLS18/24 400 series vacant/engaged privacy latch H 90 x L 55 mm Stainless steel effect 1 Pc

CLM19/1 400 series vacant/engaged privacy latch with handle H 90 x L 55 mm Chrome 1 Pc

CLM19/24 400 series vacant/engaged privacy latch with handle H 90 x L 55 mm Stainless steel effect 1 Pc

CL105/1 Large keeper side plate for hinged doors H 90 x L 55 mm Chrome 1 Pc

CL105/24 Large keeper side plate for hinged doors H 90 x L 55 mm Stainless steel effect 1 Pc

HINGES FOR SHOWER PARTITIONS

CER26/1 Hinge 26 side H 57 x L 80 mm - internal 11 mm Chrome 1 Pc

CER26/2 Hinge 26 side H 57 x L 80 mm - internal 11 mm Gold 1 Pc

CER26/3 Hinge 26 side H 57 x L 80 mm - internal 11 mm Brushed nickel 1 Pc

CER26/4 Hinge 26 side H 57 x L 80 mm - internal 11 mm Bronze 1 Pc

CER27/1 Hinge 27 central H 57 x L 80 mm - internal 11 mm Chrome 1 Pc

CER27/2 Hinge 27 central H 57 x L 80 mm - internal 11 mm Gold 1 Pc

CER27/3 Hinge 27 central H 57 x L 80 mm - internal 11 mm Brushed nickel 1 Pc

CER27/4 Hinge 27 central H 57 x L 80 mm - internal 11 mm Bronze 1 Pc

Art. Description Finish Q.ty EURO

94,32

98,09

116,45

124,43

76,30

75,22

112,33

112,97

67,24

69,93

96,70

99,19

42,60

47,61

69,51

111,67

75,07

94,19

69,12

110,91

74,65

93,60

SYSTEMS FOR SHOWER PARTITIONS

Page 165 >>> CATALOGUE REFERENCE PAGE 836/839 >>>

CER28/1 Hinge 28 glass/glass 90° H 80 x 80 x L 50 x 50 mm internal 11 mm Chrome 1 Pc

CER28/2 Hinge 28 glass/glass 90° H 80 x 80 x L 50 x 50 mm internal 11 mm Gold 1 Pc

CER28/3 Hinge 28 glass/glass 90° H 80 x 80 x L 50 x 50 mm internal 11 mm Brushed nickel 1 Pc

CER28/4 Hinge 28 glass/glass 90° H 80 x 80 x L 50 x 50 mm internal 11 mm Bronze 1 Pc

CER29/1 Hinge 29 glass/glass in line H 80 x L 104 mm internal 11 mm Chrome 1 Pc

CER29/2 Hinge 29 glass/glass in line H 80 x L 104 mm internal 11 mm Gold 1 Pc

CER29/3 Hinge 29 glass/glass in line H 80 x L 104 mm internal 11 mm Brushed nickel 1 Pc

CER29/4 Hinge 29 glass/glass in line H 80 x L 104 mm internal 11 mm Bronze 1 Pc

CER30/1 Hinge 30 glass/glass 135° H 80x80 x L 50x50 mm internal 11 mm Chrome 1 Pc

CER30/2 Hinge 30 glass/glass 135° H 80x80 x L 50x50 mm internal 11 mm Gold 1 Pc

CER30/3 Hinge 30 glass/glass 135° H 80x80 x L 50x50 mm internal 11 mm Brushed nickel 1 Pc

CER30/4 Hinge 30 glass/glass 135° H 80x80 x L 50x50 mm internal 11 mm Bronze 1 Pc

CER31/1 Safety in line hinge 31 glass/glass H 80 x L 106 mm internal 11 mm Chrome 1 Pc

CER31/2 Safety in line hinge 31 glass/glass H 80 x L 106 mm internal 11 mm Gold 1 Pc

CER31/3 Safety in line hinge 31 glass/glass H 80 x L 106 mm internal 11 mm Brushed nickel 1 Pc

CER31/4 Safety in line hinge 31 glass/glass H 80 x L 106 mm internal 11 mm Bronze 1 Pc

CER32/1 Overlapped hinge 32 glass/glass - in line Chrome 1 Pc

CER32/2 Overlapped hinge 32 glass/glass - in line Gold 1 Pc

CER32/3 Overlapped hinge 32 glass/glass - in line Brushed nickel 1 Pc

CER32/4 Overlapped hinge 32 glass/glass - in line Bronze 1 Pc

CER33/1 Tilting hinge 33 glass/glass - in line Chrome 1 Pc

CER33/2 Tilting hinge 33 glass/glass - in line Gold 1 Pc

CER33/3 Tilting hinge 33 glass/glass - in line Brushed nickel 1 Pc

CER33/4 Tilting hinge 33 glass/glass - in line Bronze 1 Pc

RECTANGULAR SAFETY GLASS HOLDER WITH SMOOTHED EDGES

MORS001/1 Safety glass holder L 40 x H 50 mm Chrome 1 Pc

MORS001/2 Safety glass holder L 40 x H 50 mm Gold 1 Pc

MORS001/3 Safety glass holder L 40 x H 50 mm Brushed nickel 1 Pc

MORS001/4 Safety glass holder L 40 x H 50 mm Bronze 1 Pc

MORS002/1 Safety glass holder L 40 x H 50 mm with 14 mm fin flush assembly Chrome 1 Pc

MORS002/2 Safety glass holder L 40 x H 50 mm with 14 mm fin flush assembly Gold 1 Pc

MORS002/3 Safety glass holder L 40 x H 50 mm with 14 mm fin flush assembly Brushed nickel 1 Pc

MORS002/4 Safety glass holder L 40 x H 50 mm with 14 mm fin flush assembly Bronze 1 Pc

MORS0023/1 Safety glass holder L 40 x H 50 mm with 27 mm fin flush assembly Chrome 1 Pc

MORS0023/2 Safety glass holder L 40 x H 50 mm with 27 mm fin flush assembly Gold 1 Pc

MORS0023/3 Safety glass holder L 40 x H 50 mm with 27 mm fin flush assembly Brushed nickel 1 Pc

MORS0023/4 Safety glass holder L 40 x H 50 mm with 27 mm fin flush assembly Bronze 1 Pc

MORS003/1 Safety glass holder L 80 x H 50 mm Chrome 1 Pc

MORS003/2 Safety glass holder L 80 x H 50 mm Gold 1 Pc

MORS003/3 Safety glass holder L 80 x H 50 mm Brushed nickel 1 Pc

MORS003/4 Safety glass holder L 80 x H 50 mm Bronze 1 Pc

Art. Description Finish Q.ty EURO95,02

147,49

104,31

131,54

93,72

149,89

102,34

127,05

123,85

165,14

139,30

150,77

123,85

165,14

139,30

150,77

123,85

165,14

139,30

150,77

96,80

135,49

115,71

126,91

26,46

42,43

31,82

39,69

23,33

48,65

28,74

40,24

30,90

57,70

32,56

48,93

44,55

65,46

45,39

55,41

SYSTEMS FOR SHOWER PARTITIONS

Page 166 >>> CATALOGUE REFERENCE PAGE 840/844 >>>

MORS033/1 Safety glass holder L 80 x H 50 mm with 27 mm fin Chrome 1 Pc

MORS033/2 Safety glass holder L 80 x H 50 mm with 27 mm fin Gold 1 Pc

MORS033/3 Safety glass holder L 80 x H 50 mm with 27 mm fin Brushed nickel 1 Pc

MORS033/4 Safety glass holder L 80 x H 50 mm with 27 mm fin Bronze 1 Pc

MORS004/1 Double safety glass holder L 101 x H 40 mm Chrome 1 Pc

MORS004/2 Double safety glass holder L 101 x H 40 mm Gold 1 Pc

MORS004/3 Double safety glass holder L 101 x H 40 mm Brushed nickel 1 Pc

MORS004/4 Double safety glass holder L 101 x H 40 mm Bronze 1 Pc

MORS005/1 Double safety glass holder 90° L 50x50 x H 40 mm Chrome 1 Pc

MORS005/2 Double safety glass holder 90° L 50x50 x H 40 mm Gold 1 Pc

MORS005/3 Double safety glass holder 90° L 50x50 x H 40 mm Brushed nickel 1 Pc

MORS005/4 Double safety glass holder 90° L 50x50 x H 40 mm Bronze 1 Pc

ZAMAK SNAP HINGES

CERZ31/1 Zamak snap hinge 31 Chrome 1 Pc

CERZ33/1 Zamak snap hinge 33 Chrome 1 Pc

CERZ3180/1 Zamak snap hinge 3180 Chrome 1 Pc

800 FREE HINGES

SFH801/1 800 series internal hinge Chrome 1 Pc

SFH801/2 800 series internal hinge Gold 1 Pc

SFH801/24 800 series internal hinge Stainless steel effect 1 Pc

SFH802/1 800 series external hinge Chrome 1 Pc

SFH802/2 800 series external hinge Gold 1 Pc

SFH802/24 800 series external hinge Stainless steel effect 1 Pc

SFH803/1 800 series in line / 90° external hinge Chrome 1 Pc

SFH803/2 800 series in line / 90° external hinge Gold 1 Pc

SFH803/24 800 series in line / 90° external hinge Stainless steel effect 1 Pc

200 FREE HINGES

SFH100/1 200 series hinge neck Chrome 1 Pc

SFH100/24 200 series hinge neck Stainless steel effect 1 Pc

Art. Description Finish Q.ty EURO53,88

76,33

55,91

68,12

44,44

60,21

51,13

57,05

39,48

63,04

47,50

60,05

30,87

30,87

48,51

43,24

70,47

43,48

43,24

70,47

43,24

58,80

94,95

61,35

62,48

64,98

SYSTEMS FOR SHOWER PARTITIONS

Page 167 >>> CATALOGUE REFERENCE PAGE 844/849 >>>

SFH101/1 200 series front hinge Chrome 1 Pc

SFH101/24 200 series front hinge Stainless steel effect 1 Pc

SFH102/1 200 series rear hinge Chrome 1 Pc

SFH102/24 200 series rear hinge Stainless steel effect 1 Pc

SFH103/1 200 series in line / 90° external hinge Chrome 1 Pc

SFH103/24 200 series in line/90° external hinge Stainless steel effect 1 Pc

200 SERIES LATCHES WITHOUT GLASS CUT-OUT

CLK20/1 200 series latch with lock H 50 mm x L 68 mm Chrome 1 Pc

CLK20/24 200 series latch with lock H 50 mm x L 68 mm Stainless steel effect 1 Pc

CLKM27/1 200 series latch with lock and handle H 50 mm x L 68 mm Chrome 1 Pc

CLKM27/24 200 series latch with lock and handle H 50 mm x L 68 mm Stainless steel effect 1 Pc

CLS245/1 200 series latch with knob H 50 L 68 mm Chrome 1 Pc

CLS245/24 200 series latch with knob H 50 L 68 mm Stainless steel effect 1 Pc

CPM247/1 200 series latch with knob and handle H 50 L 68 mm Chrome 1 Pc

CPM247/24 200 series latch with knob and handle H 50 L 68 mm Stainless steel effect 1 Pc

CLS24/1 200 series vacant/engaged privacy latch H 50 x L 68 mm Chrome 1 Pc

CLS24/24 200 series vacant/engaged privacy latch H 50 x L 68 mm Stainless steel effect 1 Pc

CLM25/1 200 series vacant/engaged privacy latch with handle H 50 x L 68 mm Chrome 1 Pc

CLM25/24 200 series vacant/engaged privacy latch with handle H 50 x L 68 mm Stainless steel effect 1 Pc

CLS70/1 Small keeper side plate for hinged doors H 50 x L 30 mm Chrome 1 Pc

CLS70/24 Small keeper side plate for hinged doors H 50 x L 30 mm Stainless steel effect 1 Pc

CLS68/1 Large keeper side plate for hinged doors H 50 x L 68 mm Chrome 1 Pc

CLS68/24 Large keeper side plate for hinged doors H 50 x L 68 mm Stainless steel effect 1 Pc

SCR001/1 Striking plate for saunas, 22 x 60 mm Chrome 1 Pc

Art. Description Finish Q.ty EURO57,27

59,56

58,31

60,65

86,43

89,88

65,11

67,82

82,97

86,43

61,48

64,04

80,47

83,82

109,62

114,00

128,96

134,12

31,54

32,85

44,71

46,49

7,98

SYSTEMS FOR SHOWER PARTITIONS

Page 168 >>> CATALOGUE REFERENCE PAGE 851/854 >>>

6/8 mm WALL/GLASS PIVOT-UP SQUARE

PTUPSQ2016/91 2010 Full height wall/glass Pivot Square hinge h 2000 mm 6 mm glass pane Polished aluminium 1 Set

PTUPSQ2016/88 2010 Full height wall/glass Pivot Square hinge h 2000 mm 6 mm glass pane Brushed steel-effect aluminium 1 Set

PTUPSQ2016/97 2010 Full height wall/glass Pivot Square hinge h 2000 mm 6 mm glass pane Matt aluminium 1 Set

PTUPSQ2018/91 2010 Full height wall/glass Pivot Square hinge h 2000 mm 8 mm glass pane Polished aluminium 1 Set

PTUPSQ2018/88 2010 Full height wall/glass Pivot Square hinge h 2000 mm 8 mm glass pane Brushed steel-effect aluminium 1 Set

PTUPSQ2018/97 2010 Full height wall/glass Pivot Square hinge h 2000 mm 8 mm glass pane Matt aluminium 1 Set

PIVOT-UP SQUARE WITH FIXED GLASS/GLASS 6/8 mm

PTUPSQ2036/91 2030 Full height wall/glass Pivot Square hinge h 2000 mm 6 mm glass pane Polished aluminium 1 Set

PTUPSQ2036/88 2030 Full height wall/glass Pivot Square hinge h 2000 mm 6 mm glass pane Brushed steel-effect aluminium 1 Set

PTUPSQ2036/97 2030 Full height wall/glass Pivot Square hinge h 2000 mm 6 mm glass pane Matt aluminium 1 Set

PTUPSQ2038/91 2030 Full height wall/glass Pivot Square hinge h 2000 mm 8 mm glass pane Polished aluminium 1 Set

PTUPSQ2038/88 2030 Full height wall/glass Pivot Square hinge h 2000 mm 8 mm glass pane Brushed steel-effect aluminium 1 Set

PTUPSQ2038/97 2030 Full height wall/glass Pivot Square hinge h 2000 mm 8 mm glass pane Matt aluminium 1 Set

PIVOT-UP SQUARE KIT

PTUPSQ2056/91 Pivot-up square wall-wall kit H 2000 mm, 6 mm glass pane Polished aluminium 1 Set

PTUPSQ2056/88 Pivot-up square wall-wall kit H 2000 mm, 6 mm glass pane Brushed steel-effect aluminium 1 Set

PTUPSQ2056/97 Pivot-up square wall-wall kit H 2000 mm, 6 mm glass pane Matt aluminium 1 Set

PTUPSQ2058/91 Pivot-up square wall-wall kit H 2000 mm, 8 mm glass pane Polished aluminium 1 Set

PTUPSQ2058/88 Pivot-up square wall-wall kit H 2000 mm, 8 mm glass pane Brushed steel-effect aluminium 1 Set

PTUPSQ2058/97 Pivot-up square wall-wall kit H 2000 mm, 8 mm glass pane Matt aluminium 1 Set

PTUPSQ2066/91 Pivot-up square wall-wall kit with fixed glass H 2000 mm, 6 mm glass pane Polished aluminium 1 Set

PTUPSQ2066/88 Pivot-up square wall-wall kit with fixed glass H 2000 mm, 6 mm glass pane Brushed steel-effect aluminium 1 Set

PTUPSQ2066/97 Pivot-up square wall-wall kit with fixed glass H 2000 mm, 6 mm glass pane Matt aluminium 1 Set

PTUPSQ2068/91 Pivot-up square wall-wall kit with fixed glass H 2000 mm, 8 mm glass pane Polished aluminium 1 Set

PTUPSQ2068/88 Pivot-up square wall-wall kit with fixed glass H 2000 mm, 8 mm glass pane Brushed steel-effect aluminium 1 Set

PTUPSQ2068/97 Pivot-up square wall-wall kit with fixed glass H 2000 mm, 8 mm glass pane Matt aluminium 1 Set

PTUPSQ2076/91 Pivot-up square corner wall-wall kit H 2000 mm, 6 mm glass pane Polished aluminium 1 Set

PTUPSQ2076/88 Pivot-up square corner wall-wall kit H 2000 mm, 6 mm glass pane Brushed steel-effect aluminium 1 Set

PTUPSQ2076/97 Pivot-up square corner wall-wall kit H 2000 mm, 6 mm glass pane Matt aluminium 1 Set

PTUPSQ2078/91 Pivot-up square wall-wall corner kit H 2000 mm, 8 mm glass pane Polished aluminium 1 Set

PTUPSQ2078/88 Pivot-up square wall-wall corner kit H 2000 mm, 8 mm glass pane Brushed steel-effect aluminium 1 Set

PTUPSQ2078/97 Pivot-up square wall-wall corner kit H 2000 mm, 8 mm glass pane Matt aluminium 1 Set

PTUPSQ2086/91 Pivot-up square wall-wall corner kit fixed glass H 2000 mm, 6 mm glass pane Polished aluminium 1 Set

PTUPSQ2086/88 Pivot-up square wall-wall corner kit fixed glass H 2000 mm, 6 mm glass pane Brushed steel-effect aluminium 1 Set

PTUPSQ2086/97 Pivot-up square wall-wall corner kit fixed glass H 2000 mm, 6 mm glass pane Matt aluminium 1 Set

PTUPSQ2088/91 Pivot-up square wall-wall corner kit fixed glass H 2000 mm, 8 mm glass pane Polished aluminium 1 Set

PTUPSQ2088/88 Pivot-up square wall-wall corner kit fixed glass H 2000 mm, 8 mm glass pane Brushed steel-effect aluminium 1 Set

PTUPSQ2088/97 Pivot-up square wall-wall corner kit fixed glass H 2000 mm, 8 mm glass pane Matt aluminium 1 Set

Art. Description Finish Q.ty EURO

MAX 70045/60

20/35 33MAX 500

MAX 70046/61

12/1

4

12/14

20/35 33MAX 500 MAX 700

12/1

4

12/14

20/35 33MAX 500 MAX 700

12/1

4

12/14

12MAX 70045/60

PITUP2050

PITUP2060

PITUP2070

PITUP2080

PITUP2090

18.5

MAX 700 18.5

MAX 70045/60

20/35 33MAX 500

MAX 70046/61

12/1

4

12/14

20/35 33MAX 500 MAX 700

12/1

4

12/14

20/35 33MAX 500 MAX 700

12/1

4

12/14

12MAX 70045/60

PITUP2050

PITUP2060

PITUP2070

PITUP2080

PITUP2090

18.5

MAX 700 18.5

MAX 70045/60

20/35 33MAX 500

MAX 70046/61

12/1

4

12/14

20/35 33MAX 500 MAX 700

12/1

4

12/14

20/35 33MAX 500 MAX 700

12/1

4

12/14

12MAX 70045/60

PITUP2050

PITUP2060

PITUP2070

PITUP2080

PITUP2090

18.5

MAX 700 18.5

MAX 70045/60

20/35 33MAX 500

MAX 70046/61

12/1

4

12/14

20/35 33MAX 500 MAX 700

12/1

4

12/14

20/35 33MAX 500 MAX 700

12/1

4

12/14

12MAX 70045/60

PITUP2050

PITUP2060

PITUP2070

PITUP2080

PITUP2090

18.5

MAX 700 18.5

277,32

312,50

220,53

279,03

314,16

222,18

420,27

464,88

338,75

422,44

466,99

340,86

363,77

382,81

285,38

365,48

384,47

287,03

506,72

535,19

403,60

508,89

537,30

405,71

597,81

666,75

483,36

601,23

670,06

486,67

740,76

819,13

601,58

744,64

822,89

605,35

SYSTEMS FOR SHOWER PARTITIONS

Page 169 >>> CATALOGUE REFERENCE PAGE 855/861 >>>

PTUPSQ2096/91 Pivot-up square wall-wall corner kit, double fixed H 2000 mm, 6 mm glass Polished aluminium 1 Set

PTUPSQ2096/88 Pivot-up square wall-wall corner kit, double fixed H 2000 mm, 6 mm glass Brushed steel-effect aluminium 1 Set

PTUPSQ2096/97 Pivot-up square wall-wall corner kit, double fixed H 2000 mm, 6 mm glass Matt aluminium 1 Set

PTUPSQ2098/91 Pivot-up square wall-wall corner kit, double fixed H 2000 mm, 8 mm glass Polished aluminium 1 Set

PTUPSQ2098/88 Pivot-up square wall-wall corner kit, double fixed H 2000 mm, 8 mm glass Brushed steel-effect aluminium 1 Set

PTUPSQ2098/97 Pivot-up square wall-wall corner kit, double fixed H 2000 mm, 8 mm glass Matt aluminium 1 Set

●BT3320/91 45° magnetic stop profile length 2000 mm Polished aluminium 1 Pc

●BT3320/88 45° magnetic stop profile length 2000 mm Brushed steel-effect aluminium 1 Pc

●BT3320/97 45° magnetic stop profile length 2000 mm Matt aluminium 1 Pc

●BT3325/91 45° magnetic stop profile length 2500 mm Polished aluminium 1 Pc

●BT3325/88 45° magnetic stop profile length 2500 mm Brushed steel-effect aluminium 1 Pc

●BT3325/97 45° magnetic stop profile length 2500 mm Matt aluminium 1 Pc

PTUPSQD/91 PTUPSQD Dam L=1000 mm Polished aluminium 1 Pc

PTUPSQD/88 PTUPSQD Dam L=1000 mm Brushed steel-effect aluminium 1 Pc

PTUPSQD/97 PTUPSQD Dam L=1000 mm Matt aluminium 1 Pc

PTUPSQANG/91 PTUPSQANG corner Polished aluminium 1 Pc

PTUPSQANG/88 PTUPSQANG corner Brushed steel-effect aluminium 1 Pc

PTUPSQANG/97 PTUPSQANG corner Matt aluminium 1 Pc

PIVOT-UP PIVOT HINGE FOR SHOWER PARTITIONS - 6 mm GLASS PANE

PTUP2261-DX/91 PIVOT hinge for shower partitions right H=2300 mm for 6 mm glass pane Polished aluminium 1 Pc

PTUP2261-SX/91 PIVOT hinge for shower partitions left H=2300 mm for 6 mm glass pane Polished aluminium 1 Pc

●PTUP26/91 UP Aluminium dam L 2000 mm Polished aluminium 1 Pc

PTUP30/1 UP connection angle Chrome 1 Pc

PIVOT-BATH HINGE

PTBH1964/91 PIVOT-BATH hinge for shower partitions H=1500 mm for 6 mm glass pane Polished aluminium 1 Pc

Art. Description Finish Q.ty EURO

MAX 70045/60

20/35 33MAX 500

MAX 70046/61

12/1

4

12/14

20/35 33MAX 500 MAX 700

12/1

4

12/14

20/35 33MAX 500 MAX 700

12/1

4

12/14

12MAX 70045/60

PITUP2050

PITUP2060

PITUP2070

PITUP2080

PITUP2090

18.5

MAX 700 18.5

883,71

971,51

719,81

888,04

975,73

724,02

86,45

70,31

64,85

122,83

88,16

80,43

21,38

25,20

17,11

8,44

7,01

7,58

233,26

233,26

30,13

6,64

152,92

SYSTEMS FOR SHOWER PARTITIONS

Page 170 >>> CATALOGUE REFERENCE PAGE 862/866 >>>

SAFETY RODS

MF350/1 Wall/glass safety rod with swivel fittings L 350 x 10 x 20 mm, Chrome 1 Pc

for 6/8 mm glass

MF1515/1 Articulated wall/glass safety rod L 500 x Ø 19 mm Chrome 1 Pc

MF127/1 MF127 wall/glass safety rod L 1000 x Ø 12.7 mm Chrome 1 Pc

MF129/1 MF129 45° wall/glass safety rod L 600 x Ø 12.7 mm Chrome 1 Pc

SAFETY RODS Ø 20 mm

MF06100/1 Wall/glass safety rod L 1020 x Ø 20 mm Chrome 1 Pc

MF06100/2 Wall/glass safety rod L 1020 x Ø 20 mm Gold 1 Pc

MF06100/3 Wall/glass safety rod L 1020 x Ø 20 mm Brushed nickel 1 Pc

MF06130/1 Wall/glass safety rod L 1320 x Ø 20 mm Chrome 1 Pc

MF06130/3 Wall/glass safety rod L 1320 x Ø 20 mm Brushed nickel 1 Pc

MF06160/1 Wall/glass safety rod L 1620 x Ø 20 mm Chrome 1 Pc

MF06160/3 Wall/glass safety rod L 1620 x Ø 20 mm Brushed nickel 1 Pc

MF008670/1 Wall/glass articulated safety rod L 670 x Ø 20 mm Chrome 1 Pc

MF008670/3 Wall/glass articulated safety rod L 670 x Ø 20 mm Brushed nickel 1 Pc

MF007100/1 Glass/glass safety rod L 1050 Ø 20 mm Chrome 1 Pc

MF007100/3 Glass/glass safety rod L 1050 Ø 20 mm Brushed nickel 1 Pc

MF007130/1 Glass/glass safety rod L 1350 Ø 20 mm Chrome 1 Pc

MF007130/3 Glass/glass safety rod L 1350 Ø 20 mm Brushed nickel 1 Pc

MF007160/1 Glass/glass safety rod L 1650 Ø 20 mm Chrome 1 Pc

MF007160/3 Glass/glass safety rod L 1650 Ø 20 mm Brushed nickel 1 Pc

MF9812/1 Wall/glass articulated safety rod L 1030 x Ø 20 mm Chrome 1 Pc

MF9812/3 Wall/glass articulated safety rod L 1030 x Ø 20 mm Brushed nickel 1 Pc

MF09430/1 Ceiling/glass telescopic rod A 402 B 217 mm Chrome 1 Pc

MF09430/3 Ceiling/glass telescopic rod A 402 B 217 mm Brushed nickel 1 Pc

MF09410/1 Wall/glass safety rod with fixing screw Ø 30 mm, L 1020 x Ø 20 mm Chrome 1 Pc

MF09410/3 Wall/glass safety rod with fixing screw Ø 30 mm, L 1020 x Ø 20 mm Brushed nickel 1 Pc

MF09413/1 Wall/glass safety rod with fixing screw Ø 30 mm, L 1320 x Ø 20 mm Chrome 1 Pc

MF09413/3 Wall/glass safety rod with fixing screw Ø 30 mm, L 1320 x Ø 20 mm Brushed nickel 1 Pc

MF09416/1 Wall/glass safety rod with fixing screw Ø 30 mm, L 1620 x Ø 20 mm Chrome 1 Pc

MF09416/3 Wall/glass safety rod with fixing screw Ø 30 mm, L 1620 x Ø 20 mm Brushed nickel 1 Pc

Art. Description Finish Q.ty EURO

43,84

82,12

67,37

53,94

82,80

156,02

127,28

99,22

140,56

122,03

161,95

126,70

142,68

97,62

149,17

114,05

162,46

136,86

183,84

115,64

157,84

117,72

126,65

81,43

123,00

97,85

136,29

120,66

157,67

SYSTEMS FOR SHOWER PARTITIONS

Page 171 >>> CATALOGUE REFERENCE PAGE 866/867 >>>

MF09410C20/1 Wall/glass safety rod with COFIS20 Ø 20 mm, L 1020 x Ø 20 mm Chrome 1 Pc

MF09410C20/3 Wall/glass safety rod with COFIS20 Ø 20 mm, L 1020 x Ø 20 mm Brushed nickel 1 Pc

MF09413C20/1 Wall/glass safety rod with COFIS20 Ø 20 mm, L 1320 x Ø 20 mm Chrome 1 Pc

MF09413C20/3 Wall/glass safety rod with COFIS20 Ø 20 mm, L 1320 x Ø 20 mm Brushed nickel 1 Pc

MF09416C20/1 Wall/glass safety rod with COFIS20 Ø 20 mm, L 1620 x Ø 20 mm Chrome 1 Pc

MF09416C20/3 Wall/glass safety rod with COFIS20 Ø 20 mm, L 1620 x Ø 20 mm Brushed nickel 1 Pc

MF1000/1 Safety rod Ø 20 x L 1000 mm Chrome 1 Pc

MF1000/2 Safety rod Ø 20 x L 1000 mm Gold 1 Pc

MF1000/3 Safety rod Ø 20 x L 1000 mm Brushed nickel 1 Pc

MF1300/1 Safety rod Ø 20 x L 1300 mm Chrome 1 Pc

MF1300/3 Safety rod Ø 20 x L 1300 mm Brushed nickel 1 Pc

MF1600/1 Safety rod Ø 20 x L 1600 mm Chrome 1 Pc

MF1600/3 Safety rod Ø 20 x L 1600 mm Brushed nickel 1 Pc

MF10/1 End fitting Ø 28 x 48 mm with COFIS20 Chrome 1 Pc

MF10/3 End fitting Ø 28 x 48 mm with COFIS20 Brushed nickel 1 Pc

MF12/1 End fitting Ø 28 x 48 mm with screw Ø 30 mm Chrome 1 Pc

MF12/3 End fitting Ø 28 x 48 mm with screw Ø 30 mm Brushed nickel 1 Pc

MF02/1 Wall fitting for safety rod Ø 35 x 20 mm Chrome 1 Pc

MF02/2 Wall fitting for safety rod Ø 35 x 20 mm Gold 1 Pc

MF02/3 Wall fitting for safety rod Ø 35 x 20 mm Brushed nickel 1 Pc

MF04/1 Glass fitting with clamp Ø 28 x 48 mm Chrome 1 Pc

MF04/2 Glass fitting with clamp Ø 28 x 48 mm Gold 1 Pc

MF04/3 Glass fitting with clamp Ø 28 x 48 mm Brushed nickel 1 Pc

MF05/1 T-coupling Ø 28 x 48 x 52 mm Chrome 1 Pc

MF05/3 T-coupling Ø 28 x 48 x 52 mm Brushed nickel 1 Pc

MF06/1 Cylinder with clamp Ø 28 x 50 mm Chrome 1 Pc

MF06/3 Cylinder with clamp Ø 28 x 50 mm Brushed nickel 1 Pc

SAS020/1 Adjustable 90° fitting Ø 30 mm for Ø 20 mm tube Chrome 1 Pc

SAS020/3 Adjustable 90° fitting Ø 30 mm for Ø 20 mm tube Brushed nickel 1 Pc

MFBOC Accessory for wall anchoring for Item SAS020 1 Pc

Art. Description Finish Q.ty EURO84,85

121,35

101,27

134,63

124,08

156,02

44,71

87,59

72,53

61,13

85,82

83,94

107,20

28,51

32,39

25,09

34,04

11,63

22,58

16,42

26,46

45,85

38,32

32,39

44,19

45,62

58,16

44,48

46,99

8,21

SYSTEMS FOR SHOWER PARTITIONS

Page 172 >>> CATALOGUE REFERENCE PAGE 868/871 >>>

SOLEIL ROYAL SERIES SAFETY RODS

MFAC1000/8 SOLEIL ROYAL series wall/glass safety rod Ø 20 x L 1000 mm Brushed steel 1 Pc

MFCC13/8 Fixed glass fitting for SOLEIL ROYAL series safety rod Ø 30 x H 58 mm Brushed steel 1 Pc

MFCC11/8 Wall-mounted fitting for SOLEIL ROYAL series safety rod Ø 30 x L 25 mm Brushed steel 1 Pc

MFCC17/8 Glass fitting for SOLEIL ROYAL series safety rod Ø 30 x L 55 mm x H 61 mm Brushed steel 1 Pc

MFCC20/8 Round tube Ø 20 mm th=1 mm L=1000 mm Brushed steel 1 Pc

MFCC28/8 Round tube Ø 20 mm th=1 mm L=2000 mm Brushed steel 1 Pc

MFCC15/8 Joint for SOLEIL ROYAL series safety rod Ø 30 x H 55 x 55 mm Brushed steel 1 Pc

SAFETY RODS Ø 19 mm

SAS1000/1 Safety rod Ø 19 x 1000 mm Chrome 1 Pc

SAS1000/24 Safety rod Ø 19 x 1000 mm Stainless steel effect 1 Pc

SAS1300/1 Safety rod Ø 19 x 1300 mm Chrome 1 Pc

SAS1300/24 Safety rod Ø 19 x 1300 mm Stainless steel effect 1 Pc

SAS001/1 Wall-fitting Ø 27.5 x 50 mm Chrome 1 Pc

SAS001/24 Wall-fitting Ø 27.5 x 50 mm Stainless steel effect 1 Pc

SAS006/1 Closed clamp Ø28 x 66 mm Chrome 1 Pc

SAS006/24 Closed clamp Ø28 x 66 mm Stainless steel effect 1 Pc

SAS005/1 Through clamp Ø28 x 66 mm Chrome 1 Pc

SAS005/24 Through clamp Ø28 x 66 mm Stainless steel effect 1 Pc

SAS003/1 Through and swivel clamp Ø28 x 66 mm Chrome 1 Pc

SAS003/24 Through and swivel clamp Ø28 x 66 mm Stainless steel effect 1 Pc

SAS004/1 Closed and swivel clamp Ø28 x 66 mm Chrome 1 Pc

SAS004/24 Closed and swivel clamp Ø28 x 66 mm Stainless steel effect 1 Pc

SAS008/1 Adjustable 90° fitting with clamp Ø28 x 46+46 mm Chrome 1 Pc

SAS008/24 Adjustable 90° fitting with clamp Ø28 x 46+46 mm Stainless steel effect 1 Pc

SAS007/1 Adjustable 90° fitting Ø 28 for Ø19 mm tube Chrome 1 Pc

SAS007/24 Adjustable 90° fitting Ø 28 for Ø19 mm tube Stainless steel effect 1 Pc

SAS009/1 End cap for bars Ø 19 x 17 mm Chrome 1 Pc

SAS009/24 End cap for bars Ø 19 x 17 mm Stainless steel effect 1 Pc

Art. Description Finish Q.ty EURO

125,45

32,79

22,35

76,41

26,69

41,97

78,69

43,11

67,97

56,11

79,79

18,74

18,74

26,23

24,47

24,99

25,96

31,76

31,76

32,06

31,26

78,62

78,62

46,63

45,82

6,25

6,25

SYSTEMS FOR SHOWER PARTITIONS

Page 173 >>> CATALOGUE REFERENCE PAGE 872/876 >>>

EXTENSIBLE RODS

MF600A/1 Horizontally extensible rod 600/1100 mm, with 90° wall fitting, for 6/8 mm glass pane Chrome 1 Pc

MF600B/1 Horizontally extensible rod 600/1100 mm, with 90° wall fitting, for 10/12 mm glass pane Chrome 1 Pc

MF645A/1 Horizontally extensible rod 600/1100 mm, with 45° wall fitting, for 6/8 mm glass pane Chrome 1 Pc

MF645B/1 Horizontally extensible rod 600/1100 mm, with 45° wall fitting, for 10/12 mm glass pane Chrome 1 Pc

MF600H/15 Only extensible rod for horizontal mounting 600/1100 mm Polished steel 1 Pc

MF300A/1 Vertically extensible rod 300/550 mm, with 90° wall fitting, for 6/8 mm glass pane Chrome 1 Pc

MF300B/1 Vertically extensible rod 300/550 mm, with 90° wall fitting, for 10/12 mm glass pane Chrome 1 Pc

MF300V/15 Only extensible rod for vertical mounting 300/550 mm Polished steel 1 Pc

MF2890/1 Wall fitting for extensible rod Chrome 1 Pc

MF2845/1 45° wall fitting for extensible rod Chrome 1 Pc

MU30095N/1 Clamp with neck for horizontal extensible rod, for 6/8 mm glass pane Chrome 1 Pc

MU30135N/1 Clamp with neck for horizontal extensible rod, for 10/12 mm glass pane Chrome 1 Pc

MU30095/1 Clamp for vertical extensible rod, for 6/8 mm glass pane Chrome 1 Pc

MU30135/1 Clamp for vertical extensible rod, for 10/12 mm glass pane Chrome 1 Pc

SYSTEMS TO INSTALL OPEN SHOWER PARTITIONS

SPD01/1 Connecting accessory between 2 safety RODS and glass, for 6/10 mm glass pane Chrome 1 Pc

SPD03/1 Connecting accessory between Safety rod and glass, for 6/10 mm glass pane Chrome 1 Pc

SPD05/1 Accessory to fix the Safety rod to the wall Chrome 1 Pc

SPD072000/91 Square safety rod 19x19 mm for SPD series L=2000 mm Polished aluminium 1 Pc

SPD071000/91 Square safety rod 19x19 mm for SPD series L=1000 mm Polished aluminium 1 Pc

OPEN SHOWER PARTITIONS - ADJUSTMENT PROFILES

SPD092300/91 Corner piece for inserting 2 glass panes 30x30 mm H=2300 mm, Polished aluminium 1 Pc

maximum glass thickness 8 mm

Art. Description Finish Q.ty EURO

128,84

128,84

137,13

137,13

85,59

92,95

92,95

55,22

29,45

37,73

13,80

13,80

8,28

8,28

33,13

31,81

16,01

66,26

33,13

58,02

SYSTEMS FOR SHOWER PARTITIONS

Page 174 >>> CATALOGUE REFERENCE PAGE 877/879 >>>

SPD112300/91 Rounded adjustment profile kit H=2300 mm Polished aluminium 1 Set

SPD132300/91 Square adjustment profile kit H=2300 mm Polished aluminium 1 Set

SPD153508/91 Adjustment profile kit SPD15 H=2100 mm for 8 mm glass Polished aluminium 1 Set

SPD153508/6 Adjustment profile kit SPD15 H=2100 mm for 8 mm glass Black 1 Set

SPD153510/91 Adjustment profile kit SPD15 H=2100 mm for 10 mm glass Polished aluminium 1 Set

SPD153510/6 Adjustment profile kit SPD15 H=2100 mm for 10 mm glass Black 1 Set

SPD153308/91 Corner profile kit SPD15 H=2100 mm for 8 mm glass Polished aluminium 1 Set

SPD153308/6 Corner profile kit SPD15 H=2100 mm for 8 mm glass Black 1 Set

SPD153310/91 Corner profile kit SPD15 H=2100 mm for 10 mm glass Polished aluminium 1 Set

SPD153310/6 Corner profile kit SPD15 H=2100 mm for 10 mm glass Black 1 Set

ACCESSORIES FOR SHOWER PARTITIONS

●PBD3183/91 U-shaped dam for shower partitions Length 3000 mm Polished aluminium 1 Pc

●PBD3183/88 U-shaped dam for shower partitions Length 3000 mm Brushed steel-effect aluminium 1 Pc

●PBD3183/97 U-shaped dam for shower partitions Length 3000 mm Matt aluminium 1 Pc

●PBD3183.220/91 U-shaped dam for shower partitions Length 2200 mm Polished aluminium 1 Pc

●PBD3183.220/88 U-shaped dam for shower partitions Length 2200 mm Brushed steel-effect aluminium 1 Pc

●PBD3183.220/97 U-shaped dam for shower partitions Length 2200 mm Matt aluminium 1 Pc

●PBD3184/91 Bevelled upper profile Length 3000 mm Polished aluminium 1 Pc

●PBD3184/88 Bevelled upper profile Length 3000 mm Brushed steel-effect aluminium 1 Pc

●PBD3184/97 Bevelled upper profile Length 3000 mm Matt aluminium 1 Pc

PBD3184,150/91 Bevelled upper profile Length 1498 mm Polished aluminium 1 Pc

PBD3184,150/88 Bevelled upper profile Length 1498 mm Brushed steel-effect aluminium 1 Pc

PBD3184,150/97 Bevelled upper profile Length 1498 mm Matt aluminium 1 Pc

PBD3184,100/91 Bevelled upper profile Length 992 mm Polished aluminium 1 Pc

PBD3184,100/88 Bevelled upper profile Length 992 mm Brushed steel-effect aluminium 1 Pc

PBD3184,100/97 Bevelled upper profile Length 992 mm Matt aluminium 1 Pc

PBDTP/91 Cap for PBD profile Polished aluminium 1 Pc

PBDTP/88 Cap for PBD profile Brushed steel-effect aluminium 1 Pc

PBDTP/97 Cap for PBD profile Matt aluminium 1 Pc

PBDTP/6 Cap for PBD profile Matt black 1 Pc

LMU20,150/97 “U” profile length 1498 mm Matt aluminium 1 Pc

●LMU20,300/97 “U” profile length 3000 mm Matt aluminium 1 Pc

LMU20,150/91 “U” profile length 1498 mm Polished aluminium 1 Pc

●LMU20,300/91 “U” profile length 3000 mm Polished aluminium 1 Pc

LMU20,150/88 “U” profile length 1498 mm Brushed steel-effect aluminium 1 Pc

●LMU20,300/88 “U” profile length 3000 mm Brushed steel-effect aluminium 1 Pc

LMU20TP/97 “U” profile caps 20 x 16 x 1 mm Matt aluminium 1 Pc

LMU20TP/91 “U” profile caps 20 x 16 x 1 mm Polished aluminium 1 Pc

LMU20TP/88 “U” profile caps 20 x 16 x 1 mm Brushed steel-effect aluminium 1 Pc

Art. Description Finish Q.ty EURO124,47

103,93

102,69

95,16

101,50

93,97

63,76

60,62

62,57

59,43

40,87

36,88

34,01

34,49

27,70

25,63

29,30

20,92

19,40

22,63

18,44

17,68

17,75

14,96

14,45

11,97

11,97

6,39

8,78

28,18

40,40

31,33

46,70

29,98

43,99

4,38

4,45

4,45

SYSTEMS FOR SHOWER PARTITIONS

Page 175 >>> CATALOGUE REFERENCE PAGE 880/881 >>>

PROFILES FOR SHOWER PARTITIONS

●PROFALL0820/97 U shaped aluminium profile - A20 B8.5 C11.5 D1.5 - L. 3000 mm Matt aluminium 1 Pc

●PROFALL0820/88 U shaped aluminium profile - A20 B8.5 C11.5 D1.5 - L. 3000 mm Brushed steel-effect aluminium 1 Pc

●PROFALL0820/91 U shaped aluminium profile - A20 B8.5 C11.5 D1.5 - L. 3000 mm Polished aluminium 1 Pc

●PROFALL1020/97 U shaped aluminium profile - A20 B10.5 C13.5 D1.5 - L. 3000 mm Matt aluminium 1 Pc

●PROFALL1020/88 U shaped aluminium profile - A20 B10.5 C13.5 D1.5 - L. 3000 mm Brushed steel-effect aluminium 1 Pc

●PROFALL1020/91 U shaped aluminium profile - A20 B10.5 C13.5 D1.5 - L. 3000 mm Polished aluminium 1 Pc

●PROFALL1225/97 U shaped aluminium profile - A25 B12 C17 D2.5 - L. 3000 mm Matt aluminium 1 Pc

●PROFALL1225/88 U shaped aluminium profile - A25 B12 C17 D2.5 - L. 3000 mm Brushed steel-effect aluminium 1 Pc

●PROFALL1225/91 U shaped aluminium profile - A25 B12 C17 D2.5 - L. 3000 mm Polished aluminium 1 Pc

●PROFALL1240/97 U shaped aluminium profile - A40 B12 C17 D2.5 - L. 3000 mm Matt aluminium 1 Pc

●PROFALL1240/88 U shaped aluminium profile - A40 B12 C17 D2.5 - L. 3000 mm Brushed steel-effect aluminium 1 Pc

●PROFALL1240/91 U shaped aluminium profile - A40 B12 C17 D2.5 - L. 3000 mm Polished aluminium 1 Pc

●PROFALL1425/97 U shaped aluminium profile - A25 B14 C19 D2.5 - L. 3000 mm Matt aluminium 1 Pc

●PROFALL1425/88 U shaped aluminium profile - A25 B14 C19 D2.5 - L. 3000 mm Brushed steel-effect aluminium 1 Pc

●PROFALL1425/91 U shaped aluminium profile - A25 B14 C19 D2.5 - L. 3000 mm Polished aluminium 1 Pc

●PROFALL1440/97 U shaped aluminium profile - A40 B14 C19 D2.5 - L. 3000 mm Matt aluminium 1 Pc

●PROFALL1440/88 U shaped aluminium profile - A40 B14 C19 D2.5 - L. 3000 mm Brushed steel-effect aluminium 1 Pc

●PROFALL1440/91 U shaped aluminium profile - A40 B14 C19 D2.5 - L. 3000 mm Polished aluminium 1 Pc

PROTAP0820/97 Side cap A20 C11.5 TH=1 mm for PROFALL0820 Matt aluminium 1 Pc

PROTAP0820/88 Side cap A20 C11.5 TH=1 mm for PROFALL0820 Brushed steel-effect aluminium 1 Pc

PROTAP0820/91 Side cap A20 C11.5 TH=1 mm for PROFALL0820 Polished aluminium 1 Pc

PROTAP1020/97 Side cap A20 C13.5 TH=1 mm for PROFALL1020 Matt aluminium 1 Pc

PROTAP1020/88 Side cap A20 C13.5 TH=1 mm for PROFALL1020 Brushed steel-effect aluminium 1 Pc

PROTAP1020/91 Side cap A20 C13.5 TH=1 mm for PROFALL1020 Polished aluminium 1 Pc

PROTAP1225/97 Side cap A25 C17 TH=1 mm for PROFALL1225 Matt aluminium 1 Pc

PROTAP1225/88 Side cap A25 C17 TH=1 mm for PROFALL1225 Brushed steel-effect aluminium 1 Pc

PROTAP1225/91 Side cap A25 C17 TH=1 mm for PROFALL1225 Polished aluminium 1 Pc

PROTAP1240/97 Side cap A40 C17 TH=1 mm for PROFALL1240 Matt aluminium 1 Pc

PROTAP1240/88 Side cap A40 C17 TH=1 mm for PROFALL1240 Brushed steel-effect aluminium 1 Pc

PROTAP1240/91 Side cap A40 C17 TH=1 mm for PROFALL1240 Polished aluminium 1 Pc

PROTAP1425/97 Side cap A25 C19 TH=1 mm for PROFALL1425 Matt aluminium 1 Pc

PROTAP1425/88 Side cap A25 C19 TH=1 mm for PROFALL1425 Brushed steel-effect aluminium 1 Pc

PROTAP1425/91 Side cap A25 C19 TH=1 mm for PROFALL1425 Polished aluminium 1 Pc

PROTAP1440/97 Side cap A40 C19 TH=1 mm for PROFALL1440 Matt aluminium 1 Pc

PROTAP1440/88 Side cap A40 C19 TH=1 mm for PROFALL1440 Brushed steel-effect aluminium 1 Pc

PROTAP1440/91 Side cap A40 C19 TH=1 mm for PROFALL1440 Polished aluminium 1 Pc

U-SHAPED ALUMINIUM PROFILES - PROALUX SERIES

●PROALUX1520/97 U-shaped aluminium profile - A20 B10.5 C15.5 - Length 3000 mm Matt aluminium 1 Pc

●PROALUX1520/88 U-shaped aluminium profile - A20 B10.5 C15.5 - Length 3000 mm Brushed steel-effect aluminium 1 Pc

●PROALUX1520/91 U-shaped aluminium profile - A20 B10.5 C15.5 - Length 3000 mm Polished aluminium 1 Pc

●PROALUX1530/97 U-shaped aluminium profile - A30 B10.5 C15.5 - Length 3000 mm Matt aluminium 1 Pc

●PROALUX1530/88 U-shaped aluminium profile - A30 B10.5 C15.5 - Length 3000 mm Brushed steel-effect aluminium 1 Pc

●PROALUX1530/91 U-shaped aluminium profile - A30 B10.5 C15.5 - Length 3000 mm Polished aluminium 1 Pc

Art. Description Finish Q.ty EURO

31,20

33,75

39,66

32,43

35,14

40,48

61,26

67,33

64,79

89,09

97,63

86,88

62,73

68,81

66,02

90,98

99,60

88,11

9,33

9,33

9,01

9,33

9,33

9,54

10,92

10,92

10,92

12,93

12,93

12,93

10,60

10,60

10,60

12,93

12,93

12,93

41,27

44,35

74,72

58,36

62,77

88,13

SYSTEMS FOR SHOWER PARTITIONS

Page 176 >>> CATALOGUE REFERENCE PAGE 881/882 >>>

●PROALUX1720/97 U-shaped aluminium profile - A20 B12.5 C17.5 - Length 3000 mm Matt aluminium 1 Pc

●PROALUX1720/88 U-shaped aluminium profile - A20 B12.5 C17.5 - Length 3000 mm Brushed steel-effect aluminium 1 Pc

●PROALUX1720/91 U-shaped aluminium profile - A20 B12.5 C17.5 - Length 3000 mm Polished aluminium 1 Pc

●PROALUX1730/97 U-shaped aluminium profile - A30 B12.5 C17.5 - Length 3000 mm Matt aluminium 1 Pc

●PROALUX1730/88 U-shaped aluminium profile - A30 B12.5 C17.5 - Length 3000 mm Brushed steel-effect aluminium 1 Pc

●PROALUX1730/91 U-shaped aluminium profile - A30 B12.5 C17.5 - Length 3000 mm Polished aluminium 1 Pc

●PROALUX1920/97 U-shaped aluminium profile - A20 B14.5 C19.5 - Length 3000 mm Matt aluminium 1 Pc

●PROALUX1920/88 U-shaped aluminium profile - A20 B14.5 C19.5 - Length 3000 mm Brushed steel-effect aluminium 1 Pc

●PROALUX1920/91 U-shaped aluminium profile - A20 B14.5 C19.5 - Length 3000 mm Polished aluminium 1 Pc

●PROALUX1930/97 U-shaped aluminium profile - A30 B14.5 C19.5 - Length 3000 mm Matt aluminium 1 Pc

●PROALUX1930/88 U-shaped aluminium profile - A30 B14.5 C19.5 - Length 3000 mm Brushed steel-effect aluminium 1 Pc

●PROALUX1930/91 U-shaped aluminium profile - A30 B14.5 C19.5 - Length 3000 mm Polished aluminium 1 Pc

PROTAP1520/97 Side cap A20 C15.5 TH=1 mm for PROALUX1520 Matt aluminium 1 Pc

PROTAP1520/88 Side cap A20 C15.5 TH=1 mm for PROALUX1520 Brushed steel-effect aluminium 1 Pc

PROTAP1520/91 Side cap A20 C15.5 TH=1 mm for PROALUX1520 Polished aluminium 1 Pc

PROTAP1530/97 Side cap A30 C15.5 TH=1 mm for PROALUX1530 Matt aluminium 1 Pc

PROTAP1530/88 Side cap A30 C15.5 TH=1 mm for PROALUX1530 Brushed steel-effect aluminium 1 Pc

PROTAP1530/91 Side cap A30 C15.5 TH=1 mm for PROALUX1530 Polished aluminium 1 Pc

PROTAP1720/97 Side cap A20 C17.5 TH=1 mm for PROALUX1720 Matt aluminium 1 Pc

PROTAP1720/88 Side cap A20 C17.5 TH=1 mm for PROALUX1720 Brushed steel-effect aluminium 1 Pc

PROTAP1720/91 Side cap A20 C17.5 TH=1 mm for PROALUX1720 Polished aluminium 1 Pc

PROTAP1730/97 Side cap A30 C17.5 TH=1 mm for PROALUX1730 Matt aluminium 1 Pc

PROTAP1730/88 Side cap A30 C17.5 TH=1 mm for PROALUX1730 Brushed steel-effect aluminium 1 Pc

PROTAP1730/91 Side cap A30 C17.5 TH=1 mm for PROALUX1730 Polished aluminium 1 Pc

PROTAP1920/97 Side cap A20 C19.5 TH=1 mm for PROALUX1920 Matt aluminium 1 Pc

PROTAP1920/88 Side cap A20 C19.5 TH=1 mm for PROALUX1920 Brushed steel-effect aluminium 1 Pc

PROTAP1920/91 Side cap A20 C19.5 TH=1 mm for PROALUX1920 Polished aluminium 1 Pc

PROTAP1930/97 Side cap A30 C19.5 TH=1 mm for PROALUX1930 Matt aluminium 1 Pc

PROTAP1930/88 Side cap A30 C19.5 TH=1 mm for PROALUX1930 Brushed steel-effect aluminium 1 Pc

PROTAP1930/91 Side cap A30 C19.5 TH=1 mm for PROALUX1930 Polished aluminium 1 Pc

PROALUXG Gasket 5 x 9.5 mm for PROALUX Per m

PROALUXG400 Gasket 5 x 9.5 mm for PROALUX - 400 m roll 1 Set

UTR65 Tool with roller in plastic material diameter 65 mm 1 Pc

STEEL PROFILES

●CANAL06/15 AISI 304 steel U-section profile - A20 B6.5 C8.5 - L 2000 mm Polished steel 1 Pc

●CANAL06/8 AISI 304 steel U-section profile - A20 B6.5 C8.5 - L 2000 mm Brushed steel 1 Pc

●CANAL1/15 AISI 304 steel U-section profile - A20 B8.5 C10.5 - L 2000 mm Polished steel 1 Pc

●CANAL1/8 AISI 304 steel U-section profile - A20 B8.5 C10.5 - L 2000 mm Brushed steel 1 Pc

●CANAL12/15 AISI 304 steel U-section profile - A20 B10.5 C12.5 - L 2000 mm Polished steel 1 Pc

●CANAL12/8 AISI 304 steel U-section profile - A20 B10.5 C12.5 - L 2000 mm Brushed steel 1 Pc

●CANAL13/15 AISI 304 steel U-section profile - A20 B12.5 C14.5 - L 2000 mm Polished steel 1 Pc

●CANAL13/8 AISI 304 steel U-section profile - A20 B12.5 C14.5 - L 2000 mm Brushed steel 1 Pc

●CANAL14/15 AISI 304 steel U-section profile - A20 B16 C18 - L 2000 mm Polished steel 1 Pc

Art. Description Finish Q.ty EURO42,60

45,77

75,78

59,67

64,17

89,16

44,05

47,33

76,93

61,10

65,71

90,30

4,56

8,55

8,55

4,56

8,55

8,55

4,56

8,55

8,55

4,56

8,55

8,55

4,56

8,55

8,55

5,02

9,01

9,01

0,73

293,10

46,76

32,53

31,48

34,54

32,97

33,84

39,62

34,13

34,13

35,28

SYSTEMS FOR SHOWER PARTITIONS

Page 177 >>> CATALOGUE REFERENCE PAGE 882 >>>

●CANAL14/8 AISI 304 steel U-section profile - A20 B16 C18 - L 2000 mm Brushed steel 1 Pc

●CANAL16/15 UAISI 304 steel -section profile - A20 B6.5 C8.5 - L 2500 mm Polished steel 1 Pc

●CANAL16/8 UAISI 304 steel -section profile - A20 B6.5 C8.5 - L 2500 mm Brushed steel 1 Pc

●CANAL2/15 AISI 304 steel U-section profile - A20 B8.5 C10.5 - L 2500 mm Polished steel 1 Pc

●CANAL2/8 AISI 304 steel U-section profile - A20 B8.5 C10.5 - L 2500 mm Brushed steel 1 Pc

●CANAL22/15 AISI 304 steel U-section profile - A20 B10.5 C12.5 - L 2500 mm Polished steel 1 Pc

●CANAL22/8 AISI 304 steel U-section profile - A20 B10.5 C12.5 - L 2500 mm Brushed steel 1 Pc

●CANAL23/15 AISI 304 steel U-section profile - A20 B12.5 C14.5 - L 2500 mm Polished steel 1 Pc

●CANAL23/8 AISI 304 steel U-section profile - A20 B12.5 C14.5 - L 2500 mm Brushed steel 1 Pc

●CANAL24/15 AISI 304 steel U-section profile - A20 B16 C18 - L 2500 mm Polished steel 1 Pc

●CANAL24/8 AISI 304 steel U-section profile - A20 B16 C18 - L 2500 mm Brushed steel 1 Pc

●CANAL26/15 AISI 304 steel U-section profile - A20 B6.5 C8.5 - L 3000 mm Polished steel 1 Pc

●CANAL26/8 AISI 304 steel U-section profile - A20 B6.5 C8.5 - L 3000 mm Brushed steel 1 Pc

●CANAL3/15 AISI 304 steel U-section profile - A20 B8.5 C10.5 - L 3000 mm Polished steel 1 Pc

●CANAL3/8 AISI 304 steel U-section profile - A20 B8.5 C10.5 - L 3000 mm Brushed steel 1 Pc

●CANAL32/15 AISI 304 steel U-section profile - A20 B10.5 C12.5 - L 3000 mm Polished steel 1 Pc

●CANAL32/8 AISI 304 steel U-section profile - A20 B10.5 C12.5 - L 3000 mm Brushed steel 1 Pc

●CANAL33/15 AISI 304 steel U-section profile - A20 B12.5 C14.5 - L 3000 mm Polished steel 1 Pc

●CANAL33/8 AISI 304 steel U-section profile - A20 B12.5 C14.5 - L 3000 mm Brushed steel 1 Pc

●CANAL34/15 AISI 304 steel U-section profile - A20 B16 C18 - L 3000 mm Polished steel 1 Pc

●CANAL34/8 AISI 304 steel U-section profile - A20 B16 C18 - L 3000 mm Brushed steel 1 Pc

CORNER STEEL PROFILES

●CANANG1/15 AISI 304 steel corner profile - A10 B10 - L 2000 mm Polished steel 1 Pc

●CANANG1/8 AISI 304 steel corner profile - A10 B10 - L 2000 mm Brushed steel 1 Pc

●CANANG12/15 AISI 304 steel corner profile - A15 B15 - L 2000 mm Polished steel 1 Pc

●CANANG12/8 AISI 304 steel corner profile - A15 B15 - L 2000 mm Brushed steel 1 Pc

●CANANG13/15 AISI 304 steel corner profile - A20 B20 - L 2000 mm Polished steel 1 Pc

●CANANG13/8 AISI 304 steel corner profile - A20 B20 - L 2000 mm Brushed steel 1 Pc

●CANANG14/15 AISI 304 steel corner profile - A30 B30 - L 2000 mm Polished steel 1 Pc

●CANANG14/8 AISI 304 steel corner profile - A30 B30 - L 2000 mm Brushed steel 1 Pc

●CANANG2/15 AISI 304 steel corner profile - A10 B10 - L 2500 mm Polished steel 1 Pc

●CANANG2/8 AISI 304 steel corner profile - A10 B10 - L 2500 mm Brushed steel 1 Pc

●CANANG22/15 AISI 304 steel corner profile - A15 B15 - L 2500 mm Polished steel 1 Pc

●CANANG22/8 AISI 304 steel corner profile - A15 B15 - L 2500 mm Brushed steel 1 Pc

●CANANG23/15 AISI 304 steel corner profile - A20 B20 - L 2500 mm Polished steel 1 Pc

●CANANG23/8 AISI 304 steel corner profile - A20 B20 - L 2500 mm Brushed steel 1 Pc

●CANANG24/15 AISI 304 steel corner profile - A30 B30 - L 2500 mm Polished steel 1 Pc

●CANANG24/8 AISI 304 steel corner profile - A30 B30 - L 2500 mm Brushed steel 1 Pc

●CANANG3/15 AISI 304 steel corner profile - A10 B10 - L 3000 mm Polished steel 1 Pc

●CANANG3/8 AISI 304 steel corner profile - A10 B10 - L 3000 mm Brushed steel 1 Pc

●CANANG32/15 AISI 304 steel corner profile - A15 B15 - L 3000 mm Polished steel 1 Pc

●CANANG32/8 AISI 304 steel corner profile - A15 B15 - L 3000 mm Brushed steel 1 Pc

●CANANG33/15 AISI 304 steel corner profile - A20 B20 - L 3000 mm Polished steel 1 Pc

●CANANG33/8 AISI 304 steel corner profile - A20 B20 - L 3000 mm Brushed steel 1 Pc

●CANANG34/15 AISI 304 steel corner profile - A30 B30 - L 3000 mm Polished steel 1 Pc

●CANANG34/8 AISI 304 steel corner profile - A30 B30 - L 3000 mm Brushed steel 1 Pc

Art. Description Finish Q.ty EURO35,28

40,40

40,40

41,93

41,93

42,22

42,23

42,81

42,81

44,25

44,28

48,26

48,26

50,32

50,31

51,19

51,20

51,77

51,78

53,46

53,46

24,74

24,60

25,95

25,95

28,41

29,89

35,09

35,09

31,69

31,84

33,08

33,06

36,21

35,91

48,28

48,28

38,02

38,05

39,83

39,85

41,00

41,00

57,32

57,32

SYSTEMS FOR SHOWER PARTITIONS

Page 178 >>> CATALOGUE REFERENCE PAGE 883/885 >>>

STEEL F-SHAPED PROFILES WITH ROUNDED EDGES

●CANALSF48/15 AISI 304 steel F-shaped profile - A20 B8.5 C27.5 D15 - L 2500 mm Polished steel 1 Pc

●CANALSF48/8 AISI 304 steel F-shaped profile - A20 B8.5 C27.5 D15 - L 2500 mm Brushed steel 1 Pc

●CANALSF50/15 AISI 304 steel F-shaped profile - A20 B10.5 C29.5 D15 - L 2500 mm Polished steel 1 Pc

●CANALSF50/8 AISI 304 steel F-shaped profile - A20 B10.5 C29.5 D15 - L 2500 mm Brushed steel 1 Pc

●CANALSF52/15 AISI 304 steel F-shaped profile - A20 B12.5 C31.5 D15 - L 2500 mm Polished steel 1 Pc

●CANALSF52/8 AISI 304 steel F-shaped profile - A20 B12.5 C31.5 D15 - L 2500 mm Brushed steel 1 Pc

STEEL U-SHAPED PROFILES WITH ROUNDED EDGES

●CANALSU66/15 AISI 304 steel U-shaped profile - A20 B6.5 C10.5 - L 2500 mm Polished steel 1 Pc

●CANALSU66/8 AISI 304 steel U-shaped profile - A20 B6.5 C10.5 - L 2500 mm Brushed steel 1 Pc

●CANALSU68/15 AISI 304 steel U-shaped profile - A20 B8.5 C12.5 - L 2500 mm Polished steel 1 Pc

●CANALSU68/8 AISI 304 steel U-shaped profile - A20 B8.5 C12.5 - L 2500 mm Brushed steel 1 Pc

●CANALSU70/15 AISI 304 steel U-shaped profile - A20 B10.5 C14.5 - L 2500 mm Polished steel 1 Pc

●CANALSU70/8 AISI 304 steel U-shaped profile - A20 B10.5 C14.5 - L 2500 mm Brushed steel 1 Pc

●CANALSU72/15 AISI 304 steel U-shaped profile - A20 B12.5 C16.5 - L 2500 mm Polished steel 1 Pc

●CANALSU72/8 AISI 304 steel U-shaped profile - A20 B12.5 C16.5 - L 2500 mm Brushed steel 1 Pc

STEEL H-SHAPED PROFILES WITH ROUNDED EDGES

●CANALH88/15 AISI 304 steel H-shaped profile - A36 B8.5 C15.5 D12.5 - L 2500 mm Polished steel 1 Pc

●CANALH88/8 AISI 304 steel H-shaped profile - A36 B8.5 C15.5 D12.5 - L 2500 mm Brushed steel 1 Pc

●CANALH90/15 AISI 304 steel H-shaped profile - A36 B10.5 C15.5 D14.5- L 2500 mm Polished steel 1 Pc

●CANALH90/8 AISI 304 steel H-shaped profile - A36 B10.5 C15.5 D14.5- L 2500 mm Brushed steel 1 Pc

●CANALH92/15 AISI 304 steel H-shaped profile - A36 B12.5 C15.5 D16.5- L 2500 mm Polished steel 1 Pc

●CANALH92/8 AISI 304 steel H-shaped profile - A36 B12.5 C15.5 D16.5- L 2500 mm Brushed steel 1 Pc

CANAL MIRROR - STEEL PROFILE

●CMIRR6.2000 AISI 304 steel U-shaped profile - H=25 mm S=6 mm B=15.5 mm - L 2000 mm Mirror 1 Pc

●CMIRR6.3000 AISI 304 steel U-shaped profile - H=25 mm S=6 mm B=15.5 mm - L 3000 mm Mirror 1 Pc

●CMIRR8.2000 AISI 304 steel U-shaped profile - H=25 mm S=8 mm B=17.5 mm - L 2000 mm Mirror 1 Pc

●CMIRR8.3000 AISI 304 steel U-shaped profile - H=25 mm S=8 mm B=17.5 mm - L 3000 mm Mirror 1 Pc

●CMIRR10.2000 AISI 304 steel U-shaped profile - H=25 mm S=10 mm B=19.5 mm - L 2000 mm Mirror 1 Pc

●CMIRR10.3000 AISI 304 steel U-shaped profile - H=25 mm S=10 mm B=19.5 mm - L 3000 mm Mirror 1 Pc

●CMIRR12.2000 AISI 304 steel U-shaped profile - H=25 mm S=12 mm B=21.5 mm - L 2000 mm Mirror 1 Pc

●CMIRR12.3000 AISI 304 steel U-shaped profile - H=25 mm S=12 mm B=21.5 mm - L 3000 mm Mirror 1 Pc

CMIRRTP6 AISI 304 steel mirror polished end cap - H=24.8 mm B=15.5 mm Mirror 1 Pc

CMIRRTP8 AISI 304 steel mirror polished end cap - H=24.8 mm B=17.5 mm Mirror 1 Pc

CMIRRTP10 AISI 304 steel mirror polished end cap - H=24.8 mm B=19.5 mm Mirror 1 Pc

CMIRRTP12 AISI 304 steel mirror polished end cap - H=24.8 mm B=21.5 mm Mirror 1 Pc

●CANALM01 U-shaped 6K steel mirror polished profile inner 8.5 x L 2000 mm 1 Pc

●CANALM02 U-shaped 6K steel mirror polished profile inner 8.5 x L 2500 mm 1 Pc

●CANALM03 U-shaped 6K steel mirror polished profile inner 8.5 x L 3000 mm 1 Pc

●CANALM012 U-shaped 6K steel mirror polished profile inner 10.5 x L 2000 mm 1 Pc

●CANALM022 U-shaped 6K steel mirror polished profile inner 10.5 x L 2500 mm 1 Pc

●CANALM032 U-shaped 6K steel mirror polished profile inner 10.5 x L 3000 mm 1 Pc

Art. Description Finish Q.ty EURO

97,44

97,44

102,86

103,74

100,73

100,73

61,86

61,86

70,73

67,33

66,24

71,88

70,07

73,57

97,44

97,44

99,08

99,08

100,73

100,73

62,10

92,78

62,10

92,78

79,17

118,71

79,17

118,71

2,19

2,19

2,19

2,19

40,24

48,95

57,66

40,63

50,07

60,13

SYSTEMS FOR SHOWER PARTITIONS

Page 179 >>> CATALOGUE REFERENCE PAGE 886/890 >>>

KROMO PROFILES

●PROFALL0820KR/1 U shaped aluminium profile - A20 B8.5 C11.5 D1.5 - Length 2997 mm Chrome 1 Pc

●PROFALL1020KR/1 U shaped aluminium profile - A20 B10.5 C13.5 D1.5 - Length 2997 mm Chrome 1 Pc

●PROFALL1225KR/1 U shaped aluminium profile - A25 B12 C17 D2.5 - Length 2997 mm Chrome 1 Pc

●PROFIX1630KR/1 U-shaped aluminium profile 21 x 30 Length 2997 mm Chrome 1 Pc

●PROFIX2130KR/1 Aluminium snap profile 21 x 30 Length 2997 mm Chrome 1 Pc

●LMU20,300KR/1 “U” profile length 2997 mm Chrome 1 Pc

●PBD3185KR/1 Aluminium dam, U-shaped profile L. 2997 mm 15 x 16 mm Chrome 1 Pc

●PBD3184KR/1 Bevelled upper profile Length 2997 mm Chrome 1 Pc

NV3100KR/1 Central upright L=2947 mm for NOVI 3000 kit Chrome 1 Pc

NV3300KR/1 Side upright L=2947 mm for NOVI 3000 kit Chrome 1 Pc

●MTS3000KR/1 Single mirror support profile 30 x 13 x L 2997 mm Chrome 1 Pc

●MTD3000KR/1 Double mirror support profile 60 x 13 x L 2997 mm Chrome 1 Pc

PROTAP0820KR/1 Side cap A20 C11.5 TH=1 mm for PROFALL0820 Chrome 1 Pc

PROTAP1020KR/1 Side cap A20 C13.5 TH=1 mm for PROFALL1020 Chrome 1 Pc

PROTAP1225KR/1 Side cap A25 C17 TH=1 mm for PROFALL1225 Chrome 1 Pc

PROFIXTPUKR/1 Side cap 30X21mm TH=1mm for PROFIX1630-2130 Chrome 1 Pc

LMU20TPKR/1 “U” profile caps 20 x 16 x 1 mm Chrome 1 Pc

NV3500KR/1 Cover for upper bracket Chrome 1 Pc

STRIKE PROFILE

●BT31/15 Magnetic strike profile 10.5 x 22 x L 2500 mm Polished steel 1 Pc

●BT31/8 Magnetic strike profile 10.5 x 22 x L 2500 mm Brushed steel 1 Pc

●BT3320/91 45° magnetic stop profile length 2000 mm Polished aluminium 1 Pc

●BT3320/88 45° magnetic stop profile length 2000 mm Brushed steel-effect aluminium 1 Pc

●BT3320/97 45° magnetic stop profile length 2000 mm Matt aluminium 1 Pc

●BT3325/91 45° magnetic stop profile length 2500 mm Polished aluminium 1 Pc

●BT3325/88 45° magnetic stop profile length 2500 mm Brushed steel-effect aluminium 1 Pc

●BT3325/97 45° magnetic stop profile length 2500 mm Matt aluminium 1 Pc

●BT3520/91 90° strike profile length 2000 mm Polished aluminium 1 Pc

●BT3520/88 90° strike profile length 2000 mm Brushed steel-effect aluminium 1 Pc

●BT3520/97 90° strike profile length 2000 mm Matt aluminium 1 Pc

●BT3525/91 90° strike profile length 2500 mm Polished aluminium 1 Pc

●BT3525/88 90° strike profile length 2500 mm Brushed steel-effect aluminium 1 Pc

●BT3525/97 90° strike profile length 2500 mm Matt aluminium 1 Pc

ADHESIVE SHOWER PARTITION GASKETS

●GMVHB1 Pair of 45° adhesive magnetic gaskets, length 2200 mm Transparent 1 Pair

●GMVHB1NR Pair of 45° adhesive magnetic gaskets, length 2200 mm Black 1 Pair

●GMVHB13000 Pair of 45° adhesive magnetic gaskets, length 3000 mm Transparent 1 Pair

●GMVHB13000NR Pair of 45° adhesive magnetic gaskets, length 3000 mm Black 1 Pair

●GMVHB4 Adhesive gasket with balloon, length 2200 mm Transparent 1 Pc

●GMVHB4NR Adhesive gasket with balloon, length 2200 mm Black 1 Pc

●GMVHB43000 Adhesive gasket with balloon, length 3000 mm Transparent 1 Pc

●GMVHB43000NR Adhesive gasket with balloon, length 3000 mm Black 1 Pc

Art. Description Finish Q.ty EURO

103,63

104,07

130,97

151,64

199,26

108,47

96,59

89,72

277,85

266,90

134,78

160,34

5,71

5,71

6,27

5,53

5,21

8,98

39,00

42,43

86,45

70,31

64,85

122,83

88,16

80,43

80,74

66,72

61,60

124,77

92,09

84,65

53,31

53,31

71,38

71,38

21,52

21,52

27,59

27,59

SYSTEMS FOR SHOWER PARTITIONS

Page 180 >>> CATALOGUE REFERENCE PAGE 891/895 >>>

●GMVHB3 Adhesive gasket with straight fin, length 2200 mm Transparent 1 Pc

●GMVHB3NR Adhesive gasket with straight fin, length 2200 mm Black 1 Pc

●GMVHB33000 Adhesive gasket with straight fin, length 3000 mm Transparent 1 Pc

●GMVHB33000NR Adhesive gasket with straight fin, length 3000 mm Black 1 Pc

●GMVHB2 Adhesive gasket with balloon dam and drip rail, length 2200 mm Transparent 1 Pc

●GMVHB2NR Adhesive gasket with balloon dam and drip rail, length 2200 mm Black 1 Pc

GSLSVL Disposable degreasing wiper impregnated with isopropyl alcohol 1 Pc

FX1000 Surface preparation for UV bonding - 500 ml - complete with sprayer 1 Pc

FXTNT01 TNT cloth for cleaning surfaces to be bonded - 40 x 25 cm - 50 sheet package 1 Pack

3MSGP Adhesion promoter containing silane to prepare the glass for VHB double sided adhesive application 1 Pc

SHOWER PARTITION GASKETS 10/12 mm

●GM40 Gasket with side fin for 10/12 mm glass panes - L 2200 mm Transparent 1 Pc

●GM4025 Gasket with side fin for 10/12 mm glass panes - L 2500 mm Transparent 1 Pc

●GM4030 Gasket with side fin for 10/12 mm glass panes - L 3000 mm Transparent 1 Pc

●GM42 Gasket with balloon for 10/12 mm glass panes - L 2200 mm Transparent 1 Pc

●GM4225 Gasket with balloon for 10/12 mm glass panes - L 2500 mm Transparent 1 Pc

●GM4230 Gasket with balloon for 10/12 mm glass panes - L 3000 mm Transparent 1 Pc

●GM44 Sealing gasket with fin for 10/12 mm glass panes - L 2200 mm Transparent 1 Pc

●GM4425 Sealing gasket with fin for 10/12 mm glass panes - L 2500 mm Transparent 1 Pc

●GM4430 Sealing gasket with fin for 10/12 mm glass panes - L 3000 mm Transparent 1 Pc

●GM46 Gasket with “h” rabbet for 10/12 mm glass panes - L 2200 mm Transparent 1 Pc

●GM4625 Gasket with “h” rabbet for 10/12 mm glass panes - L 2500 mm Transparent 1 Pc

●GM4630 Gasket with “h” rabbet for 10/12 mm glass panes - L 3000 mm Transparent 1 Pc

Art. Description Finish Q.ty EURO24,89

24,89

32,33

32,33

22,64

22,64

2,19

23,09

38,56

118,61

13,49

14,53

18,44

13,17

14,97

17,96

12,61

14,37

17,24

14,61

16,61

19,88

SYSTEMS FOR SHOWER PARTITIONS

Page 181 >>> CATALOGUE REFERENCE PAGE 896/898 >>>

●GM50 Gasket with 90° rabbet for 10/12 mm glass panes - L 2200 mm Transparent 1 Pc

●GM5030 Gasket with 90° rabbet for 10/12 mm glass panes - L 3000 mm Transparent 1 Pc

●GM4810 Gasket with dam and fin drip rail for 10/12 mm glass panes - L 1000 mm Transparent 1 Pc

●GM4822 Gasket with dam and fin drip rail for 10/12 mm glass panes - L 2200 mm Transparent 1 Pc

●GM4825 Gasket with dam and fin drip rail for 10/12 mm glass panes - L 2500 mm Transparent 1 Pc

●GM4830 Gasket with dam and fin drip rail for 10/12 mm glass panes - L 3000 mm Transparent 1 Pc

●GM5210 Gasket with dam and balloon and fin deflector, 10/12 mm glass panes - L 1000 mm Transparent 1 Pc

●GM5222 Gasket with dam and balloon and fin deflector, 10/12 mm glass panes - L 2200 mm Transparent 1 Pc

●GM5225 Gasket with dam and balloon and fin deflector, 10/12 mm glass panes - L 2500 mm Transparent 1 Pc

●GM5230 Gasket with dam and balloon and fin deflector, 10/12 mm glass panes - L 3000 mm Transparent 1 Pc

SHOWER PARTITION GASKETS 8/10 mm

●GM1720DX RH in line magnetic gasket for 8/10 mm glass panes - L 2200 mm Transparent 1 Pc

●GM1720SX LH in line magnetic gasket for 8/10 mm glass panes - L 2200 mm Transparent 1 Pc

●GM17DX RH in line magnetic gasket for 8/10 mm glass panes - L 2500 mm Transparent 1 Pc

●GM17SX LH in line magnetic gasket for 8/10 mm glass panes - L 2500 mm Transparent 1 Pc

●GM1730DX RH in line magnetic gasket for 8/10 mm glass panes - L 3000 mm Transparent 1 Pc

●GM1730SX LH in line magnetic gasket for 8/10 mm glass panes - L 3000 mm Transparent 1 Pc

●GM1520DX RH 45° magnetic gasket for 8/10 mm glass panes - L 2200 mm Transparent 1 Pc

●GM1520SX LH 45° magnetic gasket for 8/10 mm glass panes - L 2200 mm Transparent 1 Pc

●GM15DX RH 45° magnetic gasket for 8/10 mm glass panes - L 2500 mm Transparent 1 Pc

●GM15SX LH 45° magnetic gasket for 8/10 mm glass panes - L 2500 mm Transparent 1 Pc

●GM1530DX RH 45° magnetic gasket for 8/10 mm glass panes - L 3000 mm Transparent 1 Pc

●GM1530SX LH 45° magnetic gasket for 8/10 mm glass panes - L 3000 mm Transparent 1 Pc

●GM06 Gasket with balloon for 8/10 mm glass panes - L 2000 mm Transparent 1 Pc

●GM0622 Gasket with balloon for 8/10 mm glass panes - L 2200 mm Transparent 1 Pc

●GM0625 Gasket with balloon for 8/10 mm glass panes - L 2500 mm Transparent 1 Pc

●GM063000 Gasket with balloon for 8/10 mm glass panes - L 3000 mm Transparent 1 Pc

●GM014 Gasket with side fin for 8/10 mm glass panes - L 2000 mm Transparent 1 Pc

●GM01422 Gasket with side fin for 8/10 mm glass panes - L 2200 mm Transparent 1 Pc

●GM01425 Gasket with side fin for 8/10 mm glass panes - L 2500 mm Transparent 1 Pc

●GM0143000 Gasket with side fin for 8/10 mm glass panes - L 3000 mm Transparent 1 Pc

●GM04 Gasket with straight fin for 8/10 mm glass panes - L 2000 mm Transparent 1 Pc

●GM0422 Gasket with straight fin for 8/10 mm glass panes - L 2200 mm Transparent 1 Pc

●GM0425 Gasket with straight fin for 8/10 mm glass panes - L 2500 mm Transparent 1 Pc

●GM0430 Gasket with straight fin for 8/10 mm glass panes - L 3000 mm Transparent 1 Pc

●GM0210 Gasket with 2 fins for 8/10 mm glass panes - L 1000 mm Transparent 1 Pc

●GM02 Gasket with 2 fins for 8/10 mm glass panes - L 2000 mm Transparent 1 Pc

●GM022500 Gasket with 2 fins for 8/10 mm glass panes - L 2500 mm Transparent 1 Pc

Art. Description Finish Q.ty EURO13,33

18,20

6,23

13,70

15,57

18,68

6,23

13,70

15,57

18,68

27,75

27,75

31,53

31,53

37,84

37,84

28,10

28,10

31,93

31,93

38,32

38,32

13,65

15,01

17,08

20,44

14,69

16,21

18,36

22,03

13,50

14,85

16,87

20,28

7,46

14,92

18,65

SYSTEMS FOR SHOWER PARTITIONS

Page 182 >>> CATALOGUE REFERENCE PAGE 899/903 >>>

SHOWER PARTITION GASKETS 6/8 mm

●GM62 Gasket with balloon for 6/8 mm glass panes - L 2200 mm Transparent 1 Pc

●GM6225 Gasket with balloon for 6/8 mm glass panes - L 2500 mm Transparent 1 Pc

●GM6230 Gasket with balloon for 6/8 mm glass panes - L 3000 mm Transparent 1 Pc

●GM05 Gasket with balloon for 6/8 mm glass panes - L 2000 mm Transparent 1 Pc

●GM0522 Gasket with balloon for 6/8 mm glass panes - L 2200 mm Transparent 1 Pc

●GM052500 Gasket with balloon for 6/8 mm glass panes - L 2500 mm Transparent 1 Pc

●GM0530 Gasket with balloon for 6/8 mm glass panes - L 3000 mm Transparent 1 Pc

●GM58 Gasket with 90° rabbet for 6/8 mm glass panes - L 2200 mm Transparent 1 Pc

●GM5830 Gasket with 90° rabbet for 6/8 mm glass panes - L 3000 mm Transparent 1 Pc

●GM01 Gasket with “h” rabbet for 6/8 mm glass panes - L 2000 mm Transparent 1 Pc

●GM012200 Gasket with “h” rabbet for 6/8 mm glass panes - L 2200 mm Transparent 1 Pc

●GM013000 Gasket with “h” rabbet for 6/8 mm glass panes - L 3000 mm Transparent 1 Pc

●GM62DX RH 45° magnetic gasket for 6/8 mm glass panes - L 2200 mm Transparent 1 Pc

●GM6230DX RH 45° magnetic gasket for 6/8 mm glass panes - L 3000 mm Transparent 1 Pc

●GM62SX LH 45° magnetic gasket for 6/8 mm glass panes - L 2200 mm Transparent 1 Pc

●GM6230SX LH 45° magnetic gasket for 6/8 mm glass panes - L 3000 mm Transparent 1 Pc

●GM12DX RH 45° magnetic gasket for 6/8 mm glass panes - L 2000 mm Embossed 1 Pc

●GM12DX2500 RH 45° magnetic gasket for 6/8 mm glass panes - L 2500 mm Embossed 1 Pc

●GM12SX LH 45° magnetic gasket for 6/8 mm glass panes - L 2000 mm Embossed 1 Pc

●GM12SX2500 LH 45° magnetic gasket for 6/8 mm glass panes - L 2500 mm Embossed 1 Pc

●GM66DX RH magnetic gasket for 6/8 mm glass panes - L 2200 mm Transparent 1 Pc

●GM6630DX RH magnetic gasket for 6/8 mm glass panes - L 3000 mm Transparent 1 Pc

●GM66SX LH magnetic gasket for 6/8 mm glass panes - L 2200 mm Transparent 1 Pc

●GM6630SX LH magnetic gasket for 6/8 mm glass panes - L 3000 mm Transparent 1 Pc

●GM11DX RH magnetic gasket for 6/8 mm glass panes - L 2000 mm Embossed 1 Pc

●GM11DX2500 RH magnetic gasket for 6/8 mm glass panes - L 2500 mm Embossed 1 Pc

●GM11SX LH magnetic gasket for 6/8 mm glass panes - L 2000 mm Embossed 1 Pc

●GM11SX2500 LH magnetic gasket for 6/8 mm glass panes - L 2500 mm Embossed 1 Pc

●GM13DX3000 RH magnetic gasket for 6/8 mm glass panes - L 3000 mm Transparent 1 Pc

●GM13SX3000 LH magnetic gasket for 6/8 mm glass panes - L 3000 mm Transparent 1 Pc

●GM0722 Sealing gasket with overlap fin for 6/8 mm glass panes - L 2200 mm Transparent 1 Pc

●GM0725 Sealing gasket with overlap fin for 6/8 mm glass panes - L 2500 mm Transparent 1 Pc

●GM073000 Sealing gasket with overlap fin for 6/8 mm glass panes - L 3000 mm Transparent 1 Pc

●GM7222 Sealing gasket with fin for 6/8 mm glass panes - L 2200 mm Transparent 1 Pc

●GM7225 Sealing gasket with fin for 6/8 mm glass panes - L 2500 mm Transparent 1 Pc

●GM7230 Sealing gasket with fin for 6/8 mm glass panes - L 3000 mm Transparent 1 Pc

●GM7022 Gasket with straight fin for 6/8 mm glass panes - L 2200 mm Transparent 1 Pc

●GM7025 Gasket with straight fin for 6/8 mm glass panes - L 2500 mm Transparent 1 Pc

●GM7030 Gasket with straight fin for 6/8 mm glass panes - L 3000 mm Transparent 1 Pc

Art. Description Finish Q.ty EURO

14,53

16,48

19,80

13,17

14,53

16,48

19,80

11,89

16,26

14,90

16,41

22,36

25,29

34,47

25,29

34,47

22,92

28,65

22,92

28,65

24,01

32,74

24,01

32,74

21,83

27,29

21,83

27,29

50,47

50,47

11,92

13,55

16,26

12,59

14,30

17,16

12,42

14,11

16,94

SYSTEMS FOR SHOWER PARTITIONS

Page 183 >>> CATALOGUE REFERENCE PAGE 903/908 >>>

●GM8020 Gasket with central fin for 6/8 mm glass panes - L 2000 mm Transparent 1 Pc

●GM8025 Gasket with central fin for 6/8 mm glass panes - L 2500 mm Transparent 1 Pc

●GM6010 Gasket with dam and balloon and fin drip rail, 6/8 mm glass panes - L 1000 mm Transparent 1 Pc

●GM6020 Gasket with dam and balloon and fin drip rail, 6/8 mm glass panes - L 2000 mm Transparent 1 Pc

●GM6025 Gasket with dam and balloon and fin drip rail, 6/8 mm glass panes - L 2500 mm Transparent 1 Pc

●GM6030 Gasket with dam and balloon and fin drip rail, 6/8 mm glass panes - L 3000 mm Transparent 1 Pc

●GM5610 Gasket with dam and fin drip rail for 6/8 mm glass panes - L 1000 mm Transparent 1 Pc

●GM5620 Gasket with dam and fin drip rail for 6/8 mm glass panes - L 2000 mm Transparent 1 Pc

●GM5625 Gasket with dam and fin drip rail for 6/8 mm glass panes - L 2500 mm Transparent 1 Pc

●GM5630 Gasket with dam and fin drip rail for 6/8 mm glass panes - L 3000 mm Transparent 1 Pc

SHEARS

GMPINZ Shears for cutting gaskets 1 Pc

GMPINZ02 Shears for profiles with 90° safety stop 1 Pc

MIRROR DEMISTERS

STOPVAPOR0 Stopvapor 280x280 mm - 16W - 230V - 50Hz 1 Pc

STOPVAPOR05 Stopvapor 410x280 mm - 24W - 230 V - 50Hz 1 Pc

STOPVAPOR1 Stopvapor 500x500 mm - 55W - 230V - 50Hz 1 Pc

STOPVAPOR3 Stopvapor 680x580 mm - 80W - 230V - 50Hz 1 Pc

STOPVAPOR4 Stopvapor 850x580 mm - 100W - 230V - 50Hz 1 Pc

STOPVAPOR2 Stopvapor 1010x440 mm - 105W - 230V - 50Hz 1 Pc

STOPVAPOR12 Stopvapor 1250x280 mm - 70W - 230V - 50Hz 1 Pc

STOPVAPOR13 Stopvapor 1380x400 mm - 110W - 230V - 50Hz 1 Pc

STOPVAPOR15 Stopvapor 1500x360 mm - 100W - 230V - 50Hz 1 Pc

STOPVAPOR17 Stopvapor 1580x400 mm - 125W - 230V - 50Hz 1 Pc

STOPVAPOR19 Stopvapor 1550x550 mm - 170W - 230V - 50Hz 1 Pc

PROTECTIVE FILM

PEL31 Protective adhesive film for mirrors 1 Pc

Art. Description Finish Q.ty EURO10,54

13,17

5,57

11,14

13,93

16,71

5,57

11,14

13,93

16,71

106,30

152,72

36,13

42,40

63,23

72,76

78,78

98,86

71,26

94,34

92,83

108,39

143,01

329,07

SYSTEMS FOR SHOWER PARTITIONS

Page 184 >>> CATALOGUE REFERENCE PAGE 909/915 >>>

MIRROR SUPPORTING PROFILES - SERIES MT

●MTS3000/97 Single mirror support profiles 30 x 13 x L 3000 mm Matt aluminium 1 Pc

●MTS3000KR/1 Single mirror support profiles 30 x 13 x L 2997 mm Chrome 1 Pc

●MTD3000/97 Double mirror support profiles 60 x 13 x L 3000 mm Matt aluminium 1 Pc

●MTD3000KR/1 Double mirror support profiles 60 x 13 x L 2997 mm Chrome 1 Pc

MTS10 Modular locking accessory Grey 1 Pc

MTS90 90° joint accessory Grey 1 Pc

SPE2397 Glass shims 10x7 1kg package Grey Per Kg

MIRROR ANCHORING FRAMES

LR900 Mirror anchoring frames 1100x150 without switch and socket Pre-painted sheet metal 1 Pair

LR1000 Mirror anchoring frames 800x150 without switch and socket Pre-painted sheet metal 1 Pair

LR1100 Mirror anchoring frames 600x150 without switch and socket Pre-painted sheet metal 1 Pair

●W61500/97 Support profile for mirrors mod. 10 20 x11 x 10 - bar L. 5000 mm Matt aluminium 1 Pc

●W61250/97 Support profile for mirrors mod. 10 20 x11 x 10 - bar L. 2500 mm Matt aluminium 1 Pc

W61TDX/97 RH end cap Matt aluminium 1 Pc

W61TSX/97 LH end cap Matt aluminium 1 Pc

●W63500/97 Support profile for mirrors mod. 20 35 x13 x 20 - bar L. 5000 mm Matt aluminium 1 Pc

●W63250/97 Support profile for mirrors mod. 20 35 x13 x 20 - bar L. 2500 mm Matt aluminium 1 Pc

W63TDX/97 RH end cap Matt aluminium 1 Pc

W63TSX/97 LH end cap Matt aluminium 1 Pc

MIRROR ANCHORING PLATES

LR300 Mirror anchoring plates 200 x 300 mm Pre-painted sheet metal 1 Pc

LR320 Mirror anchoring plates 200 x 200 mm Pre-painted sheet metal 1 Pc

LR400 Mirror anchoring plates 120 x 120 mm Pre-painted sheet metal 1 Pc

LR500 Mirror anchoring plates 70 x 70 mm Pre-painted sheet metal 1 Pc

ECCENTRIC FITTINGS

ATEC5 POM eccentric fitting for sheet metal thickness 5 mm White 1 Pair

ATEC0 Pom eccentric fitting for mirror anchoring metal plates White 1 Pair

MIRROR SPACERS

PATA46/1 Round plate spacer without glass cut-out Ø18 mm, 4/6 mm glass panes Chrome 1 Pc

PATA46/2 Round plate spacer without glass cut-out Ø18 mm, 4/6 mm glass panes Gold 1 Pc

PATA46/3 Round plate spacer without glass cut-out Ø18 mm, 4/6 mm glass panes Brushed nickel 1 Pc

MIRROR FITTINGS

MIR20/1 Mirror holder 20 Chrome 1 Set

MIR20/3 Mirror holder 20 Brushed nickel 1 Set

MIR25/1 Mirror holder 25 Chrome 1 Set

MIR25/3 Mirror holder 25 Brushed nickel 1 Set

Art. Description Finish Q.ty EURO

46,80

134,78

78,38

160,34

6,50

6,44

10,40

110,18

102,36

94,55

100,59

59,42

3,42

3,42

97,40

57,82

3,42

3,42

10,72

8,90

3,65

2,26

5,81

4,42

12,17

19,32

12,17

27,75

28,92

33,08

34,30

SYSTEMS FOR SHOWER PARTITIONS

Page 185 >>> CATALOGUE REFERENCE PAGE 916/919 >>>

MIR30/1 Mirror 30 Chrome 1 Pc

MIR30/2 Mirror 30 Gold 1 Pc

MIR30/3 Mirror 30 Brushed nickel 1 Pc

FSP193/9 ETOILE series mirror clip Ø 30 x D 18 mm Machined steel (CNC) 1 Pc

MHAS01/1 Fitting for tilting mirrors Chrome 1 Pair

GAN001/1 Mirror hooks - Esco German Chrome 1 Set

GAN003/6/9 Mirror hooks - Vitrum for 6 mm glass panes Steel and black 1 Set

GAN002/6/9 Mirror hooks - Vitrum for 4 mm glass panes Steel and black 1 Set

CAN001/95 Corner joints for mirrors 35x35 for 4 mm glass panes x 100 pcs Nickel plated 1 Set

CAN002/95 Corner joints for mirrors 25x25 for 4 mm glass panes x 100 pcs Nickel plated 1 Set

MPB110/1 Mirror fitting 8 Chrome 1 Pc

MPB110/2 Mirror fitting 8 Gold 1 Pc

MPB110/24 Mirror fitting 8 Stainless steel effect 1 Pc

MAGNIFYING MIRRORS

SPECQUA1 Square concave mirror 250x250 thickness 2 mm 1 Pc

SPECQUA2 Square concave mirror 300x300 thickness 2 mm 1 Pc

SPECQUA3 Square concave mirror 340x340 thickness 2 mm 1 Pc

SPECTOND1 Round concave mirror ø 200 thickness 2 mm 1 Pc

SPECTOND2 Round concave mirror ø 250 thickness 2 mm 1 Pc

SPECTOND3 Round concave mirror ø 300 thickness 2 mm 1 Pc

SPECTOND4 Round concave mirror ø 400 thickness 2 mm 1 Pc

SPEK138/1 Magnifying mirror with magnet Chrome 1 Pc

SPEK141/1 Magnifying mirror 141 Chrome 1 Pc

SPEK180/1 Magnifying mirror 180 Chrome 1 Pc

SPEK215/1 Magnifying mirror 215 Chrome 1 Pc

Art. Description Finish Q.ty EURO11,00

28,06

13,85

30,98

101,73

7,30

7,30

7,30

76,98

42,20

15,10

21,92

19,10

61,01

64,53

68,72

17,00

33,89

54,25

97,05

147,84

172,07

294,47

391,63

SYSTEMS FOR SHOWCASES AND SHELVES

Page 186 >>> CATALOGUE REFERENCE PAGE 927/929 >>>

CLOSING SYSTEM FOR GLASS CASES WITH SLIDING PROFILES - SUPRA

●W.605.020.250/97 Upper guide, interior with soundproofing material 26 x 15 L.2497 mm Matt aluminium 1 Pc

●W.605.020.500/97 Upper guide, interior with soundproofing material 26 x 15 L.5000 mm Matt aluminium 1 Pc

●W.605.040.250/97 Glazing bead profile 11.5 x 30 mm interior 8.5 mm L.2497 mm Matt aluminium 1 Pc

●W.605.040.500/97 Glazing bead profile 11.5 x 30 mm interior 8.5 mm L.5000 mm Matt aluminium 1 Pc

●W.605.090.250/97 Lower guide with double-sided adhesive tape 18 x 6.5 mm L.2497 mm Matt aluminium 1 Pc

●W.605.090.500/97 Lower guide with double-sided adhesive tape 18 x 6.5 mm L.5000 mm Matt aluminium 1 Pc

W.605.050 SUPRA Carrier Matt aluminium 1 Pc

W.605.071/97 SUPRA glazing bead profile end piece Matt aluminium 1 Pc

W.606.400 SUPRA tool for carrier assembly 1 Pc

W.606.450/97 Pulling handle in plastic material Matt aluminium 1 Pc

W.606.420 Security accessory Transparent 1 Pc

W.606.320 Profile for 5 mm glass insertion Transparent Per m

W.606.310 Profile for 6 mm glass insertion Transparent Per m

●W.606.360.250/97 Dustproof profile with brush for glass 8 L.2500 mm Matt aluminium 1 Pc

●W.606.360.500/97 Dustproof profile with brush for glass 8 L.5000 mm Matt aluminium 1 Pc

●W.606.350.250/97 Dustproof profile with brush for glass 6 L.2500 mm Matt aluminium 1 Pc

●W.606.350.500/97 Dustproof profile with brush for glass 6 L.5000 mm Matt aluminium 1 Pc

W.606.620U/97 SECURA lock for SUPRA model single key Matt aluminium 1 Pc

W.606.620D/97 SECURA lock for SUPRA model different key Matt aluminium 1 Pc

W.606.640 Master key 1 Pc

W.606.600/97 SECURA adapter for SUPRA model Matt aluminium 1 Pc

●W.606.220.250/97 Single upper guide, interior with soundproofing material L.2497 mm Matt aluminium 1 Pc

●W.606.220.500/97 Single upper guide, interior with soundproofing material L.5000 mm Matt aluminium 1 Pc

●W.606.290.250/97 Single lower guide with double-sided adhesive tape 13 x 6.5 L.2497 mm Matt aluminium 1 Pc

●W.606.290.500/97 Single lower guide with double-sided adhesive tape 13 x 6.5 L.5000 mm Matt aluminium 1 Pc

●W.606.110.250/97 Frame profile 30 x 16 L.2497 mm Matt aluminium 1 Pc

●W.606.110.500/97 Frame profile 30 x 16 L.5000 mm Matt aluminium 1 Pc

●W.606.100.250/97 Track to be inserted inside the frame profile 26 x 14.5 L.2497 mm Matt aluminium 1 Pc

●W.606.100.500/97 Track to be inserted inside the frame profile 26 x 14.5 L.5000 mm Matt aluminium 1 Pc

●W.606.120.250 Dustproof and protective gasket Length 2497 mm Transparent 1 Pc

●W.606.120.500 Dustproof and protective gasket Length 5000 mm Transparent 1 Pc

Art. Description Finish Q.ty EURO

68,20

118,15

68,31

118,38

44,36

70,48

8,07

3,28

49,91

9,76

2,87

4,43

3,56

134,12

249,99

95,23

172,21

56,75

56,75

14,00

16,56

79,72

141,19

48,24

78,24

54,86

91,47

56,80

95,34

43,79

69,34

SYSTEMS FOR SHOWCASES AND SHELVES

Page 187 >>> CATALOGUE REFERENCE PAGE 930/932 >>>

CLOSING SYSTEM - ROBUSTUS

●W.610.020.250/97 Upper guide, interior with soundproofing material 36 x 20 L.2497 mm Matt aluminium 1 Pc

●W.610.020.500/97 Upper guide, interior with soundproofing material 36 x 20 L.5000 mm Matt aluminium 1 Pc

●W.610.040.250/97 Glazing bead profile 16.5 x 42 mm interior 13 mm L.2497 mm Matt aluminium 1 Pc

●W.610.040.500/97 Glazing bead profile 16.5 x 42 mm interior 13 mm L.5000 mm Matt aluminium 1 Pc

●W.610.090.250/97 Lower guide 24 x 9.5 L.2497 mm Matt aluminium 1 Pc

●W.610.090.500/97 Lower guide 24 x 9.5 L.5000 mm Matt aluminium 1 Pc

W.610.050 ROBUSTUS carrier 1 Pc

W.610.070/97 ROBUSTUS glazing bead profile end piece Matt aluminium 1 Pc

W.610.400 ROBUSTUS tool for carrier assembly 1 Pc

W.610.450/97 Pulling handle in plastic material Matt aluminium 1 Pc

W.610.420 Security accessory Transparent 1 Pc

W.610.320 Profile for 10 mm glass insertion Transparent Per m

●W.610.370.250/97 Dustproof profile with brush for glass 10 L.2497 mm Matt aluminium 1 Pc

●W.610.370.500/97 Dustproof profile with brush for glass 10 L.5000 mm Matt aluminium 1 Pc

W.610.620U/97 SECURA lock for ROBUSTUS model single key Matt aluminium 1 Pc

W.610.620D/97 SECURA lock for ROBUSTUS model different key Matt aluminium 1 Pc

W.606.640 Master key 1 Pc

W.610.600/97 SECURA adapter for ROBUSTUS model Matt aluminium 1 Pc

GLASS SHOWCASE PROFILES LENGTH 4200 mm

●PV014200/97 Glazing bead profile PV01 Length 4200 mm Matt aluminium 1 Pc

●PV014200/99 Glazing bead profile PV01 Length 4200 mm Brushed gold 1 Pc

●PV014200/6 Glazing bead profile PV01 Length 4200 mm Black 1 Pc

●PV014200/4 Glazing bead profile PV01 Length 4200 mm Bronze 1 Pc

●G914200/97 Upper guide G 91 Length 4200 mm Matt aluminium 1 Pc

●G914200/99 Upper guide G 91 Length 4200 mm Brushed gold 1 Pc

●G914200/6 Upper guide G 91 Length 4200 mm Black 1 Pc

●G914200/4 Upper guide G 91 Length 4200 mm Bronze 1 Pc

●B214200/97 Track B21 Length 4200 mm Matt aluminium 1 Pc

●B214200/99 Track B21 Length 4200 mm Brushed gold 1 Pc

●B214200/6 Track B21 Length 4200 mm Black 1 Pc

●B214200/4 Track B21 Length 4200 mm Bronze 1 Pc

Art. Description Finish Q.ty EURO

122,26

226,27

132,86

247,48

70,71

123,17

24,91

6,93

63,87

44,75

5,29

7,44

164,68

311,12

122,67

122,67

14,00

44,75

78,53

66,79

67,79

69,30

42,40

43,26

44,26

45,76

56,50

52,44

53,44

54,95

SYSTEMS FOR SHOWCASES AND SHELVES

Page 188 >>> CATALOGUE REFERENCE PAGE 933/935 >>>

●PV054200/97 Glazing bead profile PV 05 Length 4200 mm Matt aluminium 1 Pc

●PV054200/99 Glazing bead profile PV 05 Length 4200 mm Brushed gold 1 Pc

●PV054200/6 Glazing bead profile PV 05 Length 4200 mm Black 1 Pc

●PV054200/4 Glazing bead profile PV 05 Length 4200 mm Bronze 1 Pc

●G954200/97 Upper guide G 95 Length 4200 mm Matt aluminium 1 Pc

●G954200/99 Upper guide G 95 Length 4200 mm Brushed gold 1 Pc

●G954200/6 Upper guide G 95 Length 4200 mm Black 1 Pc

●G954200/4 Upper guide G 95 Length 4200 mm Bronze 1 Pc

●G934200/97 Upper guide G 93 Length 4200 mm Matt aluminium 1 Pc

●G934200/99 Upper guide G 93 Length 4200 mm Brushed gold 1 Pc

●G934200/6 Upper guide G 93 Length 4200 mm Black 1 Pc

●G934200/4 Upper guide G 93 Length 4200 mm Bronze 1 Pc

●B274200/97 Track B 27 Length 4200 mm Matt aluminium 1 Pc

●B274200/99 Track B 27 Length 4200 mm Brushed gold 1 Pc

●B274200/6 Track B 27 Length 4200 mm Black 1 Pc

●B274200/4 Track B 27 Length 4200 mm Bronze 1 Pc

GLASS SHOWCASE PROFILES LENGTH 3000 mm

●PV013000/91 Glazing bead profile PV 01 Length 3000 mm Polished aluminium 1 Pc

●PV013000/88 Glazing bead profile PV 01 Length 3000 mm Brushed steel-effect aluminium 1 Pc

●PV013000/97 Glazing bead profile PV 01 Length 3000 mm Matt aluminium 1 Pc

●G913000/91 Upper guide G 91 Length 3000 mm Polished aluminium 1 Pc

●G913000/88 Upper guide G 91 Length 3000 mm Brushed steel-effect aluminium 1 Pc

●G913000/97 Upper guide G 91 Length 3000 mm Matt aluminium 1 Pc

●B213000/91 Track B 21 Length 3000 mm Polished aluminium 1 Pc

●B213000/88 Track B 21 Length 3000 mm Brushed steel-effect aluminium 1 Pc

●B213000/97 Track B 21 Length 3000 mm Matt aluminium 1 Pc

●PV053000/91 Glazing bead profile PV 05 Length 3000 mm Polished aluminium 1 Pc

●PV053000/88 Glazing bead profile PV 05 Length 3000 mm Brushed steel-effect aluminium 1 Pc

●PV053000/97 Glazing bead profile PV 05 Length 3000 mm Matt aluminium 1 Pc

●G953000/91 Upper guide G 95 Length 3000 mm Polished aluminium 1 Pc

●G953000/88 Upper guide G 95 Length 3000 mm Brushed steel-effect aluminium 1 Pc

●G953000/97 Upper guide G 95 Length 3000 mm Matt aluminium 1 Pc

●G933000/91 Upper guide G 93 Length 3000 mm Polished aluminium 1 Pc

●G933000/88 Upper guide G 93 Length 3000 mm Brushed steel-effect aluminium 1 Pc

●G933000/97 Upper guide G 93 Length 3000 mm Matt aluminium 1 Pc

●B273000/91 Track B 27 Length 3000 mm Polished aluminium 1 Pc

●B273000/88 Track B 27 Length 3000 mm Brushed steel-effect aluminium 1 Pc

●B273000/97 Track B 27 Length 3000 mm Matt aluminium 1 Pc

Art. Description Finish Q.ty EURO39,09

41,05

42,05

43,56

28,45

34,12

35,13

36,63

37,64

40,14

41,15

42,65

29,41

34,72

35,73

37,23

54,50

64,68

59,41

36,58

34,98

32,12

39,59

46,57

42,75

34,42

32,22

29,56

27,65

23,43

21,53

36,98

32,77

30,21

26,14

24,24

22,23

SYSTEMS FOR SHOWCASES AND SHELVES

Page 189 >>> CATALOGUE REFERENCE PAGE 936/939 >>>

BEARINGS

CUSC004/97 Bearing 140 metal groove Matt aluminium 1 Pc

CUSC005/97 Bearing 140 nylon groove Matt aluminium 1 Pc

CUSC002/95 Bearing 21001 slot Nickel plated 1 Pc

CUSC003/95 Bearing 21001 Nickel plated 1 Pc

CUSC006/97 Bearing 31001 with POM wheel and slot Matt aluminium 1 Pc

CUSC007/97 Bearing 31001 with POM wheel Matt aluminium 1 Pc

LIGHTING FOR GLASS SHOWCASES - LED SPOTLIGHT

LDSPC30/6 Black 3W single LED warm spotlight Black 1 Pc

LDSPC30/97 Anodised aluminium 3W single LED warm spotlight Matt aluminium 1 Pc

LDSPC2230/6 Black 2x3W double LED warm spotlight Black 1 Pc

LDSPC2230/97 Anodised aluminium 2x3W double LED warm spotlight Matt aluminium 1 Pc

LDSPC15/6 Black 1.5W single LED warm spotlight Black 1 Pc

LDSPC15/97 Anodised aluminium 1.5W single LED warm spotlight Matt aluminium 1 Pc

LDSPC2215/6 Black 2x1.5W double LED warm spotlight Black 1 Pc

LDSPC2215/97 Anodised aluminium 2x1.5W double LED warm spotlight Matt aluminium 1 Pc

LDSPTRAFO24 24/30W 24V transformer for single and double LED spotlight 1 Pc

Art. Description Finish Q.ty EURO

6,50

5,87

3,47

5,09

3,88

3,88

173,12

173,12

248,39

248,39

148,03

148,03

223,30

223,30

81,54

SYSTEMS FOR SHOWCASES AND SHELVES

Page 190 >>> CATALOGUE REFERENCE PAGE 940/944 >>>

LOCKS FOR SLIDING SHOWCASE DOORS

SER002/1 Rack lock single key Chrome 1 Pc

SER004U/1 Rack lock single key Chrome 1 Pc

SER004D/1 Rack lock different key Chrome 1 Pc

SER23DX/95 Lock 23 for sliding doors single key for PV05 rh Nickel plated 1 Pc

SER23SX/95 Lock 23 for sliding doors single key for PV05 lh Nickel plated 1 Pc

SERKYR31/1 Lock KYR31 for sliding showcase doors single key Chrome 1 Pc

SERKYR30/1 Lock KYR30 for sliding showcase doors single key Chrome 1 Pc

SER007/1 Lock 181 for sliding doors single key Chrome 1 Pc

SER007/2 Lock 181 for sliding doors single key Gold 1 Pc

SER006/95 Lock 171 for sliding doors single key Nickel plated 1 Pc

LUXURY SHOWCASE SERIES ANGLE CLAMPS

ANG320/8 3-way angle clamp with Phillips screw Ø 20 mm Brushed steel 1 Pc

ANG316/8 3-way angle clamp with Phillips screw Ø 16 mm Brushed steel 1 Pc

ANG220/8 2-way angle clamp with Phillips screw Ø 20 mm Brushed steel 1 Pc

ANG216/8 2-way angle clamp with Phillips screw Ø 16 mm Brushed steel 1 Pc

LUXURY SHOWCASE SERIES SHELF BRACKETS

REG120/9 Shelf bracket with Phillips screw Ø 20 mm Machined steel (CNC) 1 Pc

REG116/9 Shelf bracket with Phillips screw Ø 16 mm Machined steel (CNC) 1 Pc

REG150/9 Double simple shelf bracket Machined steel (CNC) 1 Pc

Art. Description Finish Q.ty EURO

21,79

9,58

9,58

20,60

20,60

16,05

13,41

26,07

40,35

20,42

59,59

56,85

36,08

32,80

19,13

18,53

18,89

SYSTEMS FOR SHOWCASES AND SHELVES

Page 191 >>> CATALOGUE REFERENCE PAGE 946/953 >>>

LUXURY SHOWCASE SERIES HINGES

SVL2/9 Hinge for wood/glass showcases Ø 12mm with 1 Phillips screw Ø 16 mm Machined steel (CNC) 1 Pc

SVV1/9 Hinge for glass/glass showcases Ø 12 mm with 1 Phillips screw Ø 16 mm Machined steel (CNC) 1 Pc

SVL14/9 Hinge for wood/glass showcases Ø12 mm with 2 Phillips screws Ø 16 mm Machined steel (CNC) 1 Pc

SVV16/9 Hinge for glass/glass showcases Ø 12 mm with 2 Phillips screws Ø 16 mm Machined steel (CNC) 1 Pc

SVL7/9 Hinge for wood/glass showcases Ø 16 mm with 1 Phillips screw Ø 20 mm Machined steel (CNC) 1 Pc

SVV5/9 Hinge for glass/glass showcases Ø 16 mm with 1 Phillips screw Ø 20 mm Machined steel (CNC) 1 Pc

SVL70/9 Hinge for wood/glass showcases Ø 16 mm with 2 Phillips screws Ø 20 mm Machined steel (CNC) 1 Pc

SVV72/9 Hinge for glass/glass showcases Ø16 mm with 2 Phillips screws Ø 20 mm Machined steel (CNC) 1 Pc

HINGES FOR SHOWCASE DOORS - PIVOT HINGES

CERBIL80DX/1 Right pivot hinge 80 Chrome 1 Pc

CERBIL80DX/3 Right pivot hinge 80 Brushed nickel 1 Pc

CERBIL80SX/1 Left pivot hinge 80 Chrome 1 Pc

CERBIL80SX/3 Left pivot hinge 80 Brushed nickel 1 Pc

CERBIL55DX/1 Right pivot hinge 55 Chrome 1 Pc

CERBIL55DX/2 Right pivot hinge 55 Gold 1 Pc

CERBIL55DX/3 Right pivot hinge 55 Brushed nickel 1 Pc

CERBIL55SX/1 Left pivot hinge 55 Chrome 1 Pc

CERBIL55SX/2 Left pivot hinge 55 Gold 1 Pc

CERBIL55SX/3 Left pivot hinge 55 Brushed nickel 1 Pc

CER305PA6/1 Hinge 305PA/6 Chrome 1 Pc

CER305PA6/94 Hinge 305PA/6 Brushed chrome 1 Pc

CE305PG10/1 Hinge 305PG/10 Chrome 1 Pc

CE305PG10/94 Hinge 305PG/10 Brushed chrome 1 Pc

CER305PB/1 Hinge 305PB Chrome 1 Pc

CER305PB/94 Hinge 305PB Brushed chrome 1 Pc

CERBUS/9 Steel bushing for pivot hinges Machined steel (CNC) 1 Pc

Art. Description Finish Q.ty EURO

29,95

44,33

47,89

62,27

32,32

43,14

51,52

62,86

54,42

58,92

54,42

58,92

32,80

70,22

36,08

32,80

70,22

36,08

18,01

16,49

23,41

19,79

16,14

15,42

4,43

SYSTEMS FOR SHOWCASES AND SHELVES

Page 192 >>> CATALOGUE REFERENCE PAGE 954/959 >>>

HINGES FOR SHOWCASE DOORS WITH SNAP MECHANISM

MINIHINGE10/1 MINI HINGE 10 hinge Chrome 1 Pc

MINIHINGE10/2 MINI HINGE 10 hinge Gold 1 Pc

MINIHINGE10/24 MINI HINGE 10 hinge Stainless steel effect 1 Pc

MINIHINGE90/1 MINI HINGE 90° hinge Chrome 1 Pc

MINIHINGE90/2 MINI HINGE 90° hinge Gold 1 Pc

MINIHINGE90/24 MINI HINGE 90° hinge Stainless steel effect 1 Pc

MINIHINGE20/1 MINI HINGE 20 Chrome 1 Pc

MINIHINGE20/2 MINI HINGE 20 Gold 1 Pc

MINIHINGE20/24 MINI HINGE 20 Stainless steel effect 1 Pc

MINIHINGE100/1 MINI HINGE 100 hinge Chrome 1 Pc

MINIHINGE100/2 MINI HINGE 100 hinge Gold 1 Pc

MINIHINGE100/24 MINI HINGE 100 hinge Stainless steel effect 1 Pc

CER334/3 Glass/glass hinge 334 Brushed nickel 1 Pc

CER334/6 Glass/glass hinge 334 Black 1 Pc

CER334L/3 Glass/wood hinge 334 Brushed nickel 1 Pc

CER334L/6 Glass/wood hinge 334 Black 1 Pc

CER336/3 Glass glass hinge 336 Brushed nickel 1 Pc

CER336/6 Glass glass hinge 336 Black 1 Pc

CER336L/3 Glass/wood hinge 336 Brushed nickel 1 Pc

CER336L/6 Glass/wood hinge 336 Black 1 Pc

CER2660/3 Glass wood hinge 2660 Brushed nickel 1 Pc

CER2660/6 Glass wood hinge 2660 Black 1 Pc

CER1031/1 Hinge 1031 Chrome 1 Pc

CER1031/3 Hinge 1031 Brushed nickel 1 Pc

CER217/1 Hinge 217 Chrome 1 Pc

CER217/92 Hinge 217 Matt nickel 1 Pc

CER200/1 Hinge 200 Chrome 1 Pc

CER200/92 Hinge 200 Matt nickel 1 Pc

CER1024/1 Hinge 1024 Chrome 1 Pc

CER1024/2 Hinge 1024 Gold 1 Pc

CER1024/99 Hinge 1024 Brushed gold 1 Pc

CER1024/3 Hinge 1024 Brushed nickel 1 Pc

CER1025/1 Hinge 1025 Chrome 1 Pc

CER1025/2 Hinge 1025 Gold 1 Pc

CER1025/99 Hinge 1025 Brushed gold 1 Pc

CER1025/3 Hinge 1025 Brushed nickel 1 Pc

Art. Description Finish Q.ty EURO

38,78

86,03

40,33

50,84

110,00

52,87

43,53

92,24

45,93

56,99

117,31

59,27

48,63

55,92

34,04

39,14

48,63

55,92

34,04

39,14

26,86

30,69

11,73

11,73

8,58

8,53

10,09

10,04

12,82

14,05

14,05

13,26

12,82

14,05

14,05

13,26

SYSTEMS FOR SHOWCASES AND SHELVES

Page 193 >>> CATALOGUE REFERENCE PAGE 960/964 >>>

CER1027/1 Hinge 1027 Chrome 1 Pc

CER1027/3 Hinge 1027 Brushed nickel 1 Pc

CER1028/1 Hinge 1028 Chrome 1 Pc

CER1028/3 Hinge 1028 Brushed nickel 1 Pc

CER1092/1 Hinge 1092 Chrome 1 Pc

CER1092/3 Hinge 1092 Brushed nickel 1 Pc

HINGES FOR SHOWCASE DOORS WITHOUT GLASS CUT-OUT

CER630/1 Hinge 630 Chrome 1 Pc

CER650/1 Hinge 650 Chrome 1 Pc

CER670/1 Reinforcing hinge 670 Chrome 1 Pc

CER1174/1 Hinge 1174 Chrome 1 Pc

CER1174/3 Hinge 1174 Brushed nickel 1 Pc

CER306B/1 Hinge CP 306B 20 x 18 mm Chrome 1 Pc

CER305B/3 Hinge 305B Brushed nickel 1 Pc

CER560/1 Hinge 560 Chrome 1 Pc

CER560/2 Hinge 560 Gold 1 Pc

CER560/6 Hinge 560 Black 1 Pc

CER710/1 Hinges HI-FI 710 Chrome 1 Pc

CER710/3 Hinges HI-FI 710 Brushed nickel 1 Pc

CER710/6 Hinges HI-FI 710 Black 1 Pc

CER1173/1 Hinge 1173 Chrome 1 Pc

CER1173/3 Hinge 1173 Brushed nickel 1 Pc

HINGES FOR 180° SHOWCASE DOORS

CER100/1 Glass/glass hinge 100 Chrome 1 Pc

CER100/3 Glass/glass hinge 100 Brushed nickel 1 Pc

Art. Description Finish Q.ty EURO11,73

12,40

11,73

12,40

12,08

12,08

8,03

11,96

7,92

12,81

13,37

11,48

16,78

2,21

10,13

2,09

5,99

6,76

5,30

8,87

8,87

48,13

54,63

SYSTEMS FOR SHOWCASES AND SHELVES

Page 194 >>> CATALOGUE REFERENCE PAGE 964/969 >>>

CER50/1 Wood glass hinge 50 Chrome 1 Pc

CER50/3 Wood glass hinge 50 Brushed nickel 1 Pc

SERMAX20U/1 Sermax 20 lock single key Chrome 1 Pc

SERMAX20U/24 Sermax 20 lock single key Steel effect 1 Pc

SERMAX20U/2 Sermax 20 lock single key Polished gold 1 Pc

SERMAX20U/4 Sermax 20 lock single key Bronze 1 Pc

SERMAX20D/1 Sermax 20 lock different key Chrome 1 Pc

SERMAX20D/24 Sermax 20 lock different key Steel effect 1 Pc

SERMAX20D/2 Sermax 20 lock different key Polished gold 1 Pc

SERMAX20D/4 Sermax 20 lock different key Bronze 1 Pc

CER100SQ/1 Glass/glass 100SQ hinge Chrome 1 Pc

CER100SQ/3 Glass/glass 100SQ hinge Brushed nickel 1 Pc

CER50SQ/1 Wood glass hinge 50SQ Chrome 1 Pc

CER50SQ/3 Wood glass hinge 50SQ Brushed nickel 1 Pc

SERMAXU/1 Sermax 610 lock single key Chrome 1 Pc

SERMAXU/24 Sermax 610 lock single key Steel effect 1 Pc

SERMAXU/2 Sermax 610 lock single key Polished gold 1 Pc

SERMAXU/4 Sermax 610 lock single key Bronze 1 Pc

SERMAXD/1 Sermax 610 lock different key Chrome 1 Pc

SERMAXD/24 Sermax 610 lock different key Steel effect 1 Pc

SERMAXD/2 Sermax 610 lock different key Polished gold 1 Pc

SERMAXD/4 Sermax 610 lock different key Bronze 1 Pc

CER751/1 Glass glass hinge 751 Chrome 1 Pc

CER751/3 Glass glass hinge 751 Brushed nickel 1 Pc

CER755/1 Wood glass hinge 755 Chrome 1 Pc

CER755/3 Wood glass hinge 755 Brushed nickel 1 Pc

SQUARE SERIES HINGES WITH GLASS CUT-OUT

CERS401/1 Square upper and lower hinge glass/glass - wood/glass Chrome 1 Pair

CERS401/97 Square upper and lower hinge glass/glass - wood/glass Matt aluminium 1 Pair

CERS401/65 Square upper and lower hinge glass/glass - wood/glass Black 1 Pair

Art. Description Finish Q.ty EURO38,32

43,11

64,64

64,64

76,30

69,41

64,64

64,64

76,30

69,41

74,69

85,47

61,69

69,40

58,81

57,76

71,53

70,15

60,93

60,93

73,33

70,15

33,70

37,84

23,72

24,43

28,96

35,49

34,70

SYSTEMS FOR SHOWCASES AND SHELVES

Page 195 >>> CATALOGUE REFERENCE PAGE 970/973 >>>

SQUARE SERIES HINGES, HANDLES AND LOCKS WITHOUT GLASS CUT-OUT

CERS403/1 Wood/wood square upper and lower hinge Chrome 1 Pair

CERS403/97 Wood/wood square upper and lower hinge Matt aluminium 1 Pair

CERS403/65 Wood/wood square upper and lower hinge Black 1 Pair

CERS405/1 Wood/glass square central hinge Chrome 1 Pc

CERS405/97 Wood/glass square central hinge Matt aluminium 1 Pc

CERS405/65 Wood/glass square central hinge Black 1 Pc

CERS407/1 Wood/wood square upper and lower hinge for narrow frames Chrome 1 Pair

CERS407/97 Wood/wood square upper and lower hinge for narrow frames Matt aluminium 1 Pair

CERS407/65 Wood/glass square upper and lower hinge for narrow frames Black 1 Pair

MANS501/1 Square handle for single or double use Chrome 1 Pc

MANS501/97 Square handle for single or double use Matt aluminium 1 Pc

MANS501/65 Square handle for single or double use Black 1 Pc

SERS401/1 Single door square lock Chrome 1 Pc

SERS401/97 Single door square lock Matt aluminium 1 Pc

SERS401/65 Single door square lock Black 1 Pc

SERS403/1 Square lock for double door Chrome 1 Pc

SERS403/97 Square lock for double door Matt aluminium 1 Pc

SERS403/65 Square lock for double door Black 1 Pc

OVAL SERIES HINGES, HANDLES AND LOCKS WITHOUT GLASS CUT-OUT

CERS409/1 Wood/glass oval upper and lower hinge Chrome 1 Pair

CERS409/97 Wood/glass oval upper and lower hinge Matt aluminium 1 Pair

CERS409/65 Wood/glass oval upper and lower hinge Black 1 Pair

CERS411/1 Wood/glass oval upper and lower hinge for narrow frames Chrome 1 Pair

CERS411/97 Wood/glass oval upper and lower hinge for narrow frames Matt aluminium 1 Pair

CERS411/65 Wood/glass oval upper and lower hinge for narrow frames Black 1 Pair

MANS503/1 Oval handle for single or double use Chrome 1 Pc

MANS503/97 Oval handle for single or double use Matt aluminium 1 Pc

MANS503/65 Oval handle for single or double use Black 1 Pc

SERS405/1 Single door oval lock, single key Chrome 1 Pc

SERS405/97 Single door oval lock, single key Matt aluminium 1 Pc

SERS405/65 Single door oval lock, single key Black 1 Pc

SERS407/1 Double door oval lock, single key Chrome 1 Pc

SERS407/97 Double door oval lock, single key Matt aluminium 1 Pc

SERS407/65 Double door oval lock, single key Black 1 Pc

Art. Description Finish Q.ty EURO

17,36

21,09

16,26

9,39

10,75

8,39

16,63

21,51

16,63

5,43

6,88

5,43

11,65

13,80

10,60

12,22

15,00

11,38

14,58

20,41

15,74

15,69

20,46

15,69

5,05

6,79

5,09

10,81

13,59

10,54

10,96

14,01

10,96

SYSTEMS FOR SHOWCASES AND SHELVES

Page 196 >>> CATALOGUE REFERENCE PAGE 974/976 >>>

LOCKS FOR SHOWCASE DOORS IN STEEL AND ZAMAK

SERLT12/8 LT 12 lock Brushed steel 1 Pc

SER690U/7 Lock 690 single key Matt chrome 1 Pc

SER690D/7 Lock 690 diversified key Matt chrome 1 Pc

SER022U/1 Lock 3500 single key Chrome 1 Pc

SER022U/3 Lock 3500 single key Brushed nickel 1 Pc

SER019U/1 Lock SER019 single key Chrome 1 Pc

SER019D/1 Lock SER019 different key Chrome 1 Pc

SER012U/95 LOCK 910 for single door single key Nickel plated 1 Pc

SER001U/95 Cylinder lock 100 single key Nickel plated 1 Pc

SER001U/99 Cylinder lock 100 single key Brushed gold 1 Pc

SER001D/95 Cylinder lock 100 diversified key Nickel plated 1 Pc

SER011U/95 Lock 187 single key Nickel plated 1 Pc

SER011D/95 Lock 187 diversified key Nickel plated 1 Pc

SER013U/95 Lock 187 bis single key Nickel plated 1 Pc

SER013D/95 Lock 187 bis diversified key Nickel plated 1 Pc

SER020U/1 Lock SYMO 3000 single key Chrome 1 Pc

SER020U/2 Lock SYMO 3000 single key Gold 1 Pc

SER020U/3 Lock SYMO 3000 single key Brushed nickel 1 Pc

SER020D/1 Lock SYMO 3000 diversified key Chrome 1 Pc

SER020D/2 Lock SYMO 3000 diversified key Gold 1 Pc

SER020D/3 Lock SYMO 3000 diversified key Brushed nickel 1 Pc

SER021/1 Counterplate SYMO 3000 Chrome 1 Pc

SER021/2 Counterplate SYMO 3000 Gold 1 Pc

SER021/3 Counterplate SYMO 3000 Brushed nickel 1 Pc

SERF3/95 Stop for locks 100/187/187 bis Nickel plated 1 Pc

SERF1/6 Stop for lock 910 Black 1 Pc

SERF2/95 Stop for locks 690/3500 Nickel plated 1 Pc

Art. Description Finish Q.ty EURO

80,65

33,55

33,55

30,17

28,25

5,02

5,02

26,80

13,52

12,50

12,98

15,89

15,30

17,45

17,02

21,43

33,97

24,94

21,43

33,97

24,94

12,72

24,69

16,05

0,59

0,39

1,96

SYSTEMS FOR SHOWCASES AND SHELVES

Page 197 >>> CATALOGUE REFERENCE PAGE 977/980 >>>

LOCKS FOR SHOWCASE DOORS WITHOUT GLASS CUT-OUT

SER810/8 Lock without glass cut-out 10 single key Brushed steel 1 Pc

SERKYR28/97 Lock KYR28 single door single key Matt aluminium 1 Pc

SERKYR29/97 Lock KYR29 double door single key Matt aluminium 1 Pc

SER015U/95 Lock 970 without glass cut-out single key Nickel plated 1 Pc

SER016/95 Counterplate 971 without glass cut-out Nickel plated 1 Pc

SER017U/95 Lock 972 without glass cut-out for double door single key Nickel plated 1 Pc

SER71G1U/7 Lock 71 G1 single door single key Matt chrome 1 Pc

SER71G1D/7 Lock 71 G1 single door diversified key Matt chrome 1 Pc

SER76G4U/7 Lock 76 G4 double door single key Matt chrome 1 Pc

SER76G4D/7 Lock 76 G4 double door diversified key Matt chrome 1 Pc

SER024U/1 Lock SER024 single door without glass cut-out, single key Chrome 1 Pc

SER024D/1 Lock SER024 single door without glass cut-out, different key Chrome 1 Pc

SER026U/1 Lock SER026 double door without glass cut-out, single key Chrome 1 Pc

SER026D/1 Lock SER026 double door without glass cut-out, different key Chrome 1 Pc

TETRIS FITTINGS

MTET316/1 3-way tetris Ø 16 mm Chrome 1 Pc

MTET316/3 3-way tetris Ø 16 mm Brushed nickel 1 Pc

MTET31615/1 3-way tetris Ø 16 mm supplied with 3 cofis15 grub screws and gaskets Chrome 1 Pc

MTET31615/3 3-way tetris Ø 16 mm supplied with 3 cofis15 grub screws and gaskets Brushed nickel 1 Pc

Art. Description Finish Q.ty EURO

55,07

20,88

20,98

28,41

13,86

31,00

16,31

14,43

20,70

18,87

9,59

9,59

10,26

10,26

35,46

39,73

79,44

82,01

SYSTEMS FOR SHOWCASES AND SHELVES

Page 198 >>> CATALOGUE REFERENCE PAGE 980/984 >>>

MTET216/1 2-way tetris Ø 16 mm Chrome 1 Pc

MTET216/3 2-way tetris Ø 16 mm Brushed nickel 1 Pc

MTET21615/1 2-way tetris Ø 16 mm supplied with 2 cofis15 grub screws and gaskets Chrome 1 Pc

MTET21615/3 2-way tetris Ø 16 mm supplied with 2 cofis15 grub screws and gaskets Brushed nickel 1 Pc

ANGLE CLAMPS - SHELF BRACKETS

CUB001 Plexiglass cube 20x20 with one screw Transparent 1 Pc

CUB002 Plexiglass cube 20x20x2 with two screws Transparent 1 Pc

CUB003 Plexiglass cube 20x20x3 with three screws Transparent 1 Pc

CUB004 Plexiglass cube 25x25 with one screw Transparent 1 Pc

CUB005 Plexiglass cube 25x25x2 with two screws Transparent 1 Pc

CUB006 Plexiglass cube 25x25x3 with three screws Transparent 1 Pc

CUB007/95 Screw for plexiglass cubes 18 x M6 Nickel plated 1 Pc

ANG001/1 Angle clamps for 2-way flat edge showcases Chrome 1 Pc

ANG002/1 Angle clamps for 3-way flat edge showcases Chrome 1 Pc

ANG003/1 Angle clamps for 2-way round edge showcases Chrome 1 Pc

ANG004/1 Angle clamps for 3-way round edge showcases Chrome 1 Pc

REG001T/95 Through hole shelf bracket for transparent wood rubber Nickel plated 1 Pc

REG001N/95 Through hole shelf bracket for black wood rubber Nickel plated 1 Pc

REG001T/93 Through hole shelf bracket for transparent wood rubber Brass-plated 1 Pc

REG001N/93 Through hole shelf bracket for black wood rubber Brass-plated 1 Pc

REG002T/95 Shelf bracket with screw for transparent rubber showcases Nickel plated 1 Pc

REG002N/95 Shelf bracket with screw for black rubber showcases Nickel plated 1 Pc

REG002T/93 Shelf bracket with screw for transparent rubber showcases Brass-plated 1 Pc

REG002N/93 Shelf bracket with screw for black rubber showcases Brass-plated 1 Pc

REG003T/95 Double shelf bracket for transparent rubber showcases Nickel plated 1 Pc

REG003N/95 Double shelf bracket for black rubber showcases Nickel plated 1 Pc

REG003T/93 Double shelf bracket for transparent rubber showcases Brass-plated 1 Pc

REG003N/93 Double shelf bracket for black rubber showcases Brass-plated 1 Pc

MRV25E/1 Shelf bracket with eccentric screw 25 Chrome 1 Pc

MRV25E/2 Shelf bracket with eccentric screw 25 Gold 1 Pc

MRV25E/3 Shelf bracket with eccentric screw 25 Brushed nickel 1 Pc

MRV16/1 Shelf bracket with screw 16 Chrome 1 Pc

MRV16/2 Shelf bracket with screw 16 Gold 1 Pc

MRV16/3 Shelf bracket with screw 16 Brushed nickel 1 Pc

MR185/1 Eccentric shelf bracket 185 Chrome 1 Pc

MR185/2 Eccentric shelf bracket 185 Gold 1 Pc

MR185/3 Eccentric shelf bracket 185 Brushed nickel 1 Pc

MR181/1 Shelf bracket through hole 181 Chrome 1 Pc

MR181/2 Shelf bracket through hole 181 Gold 1 Pc

MR181/3 Shelf bracket through hole 181 Brushed nickel 1 Pc

MR188/1 Shelf bracket through hole 188 Chrome 1 Pc

MR188/2 Shelf bracket through hole 188 Gold 1 Pc

MR188/3 Shelf bracket through hole 188 Brushed nickel 1 Pc

MR186/1 Shelf bracket 186 Chrome 1 Pc

MR186/2 Shelf bracket 186 Gold 1 Pc

MR186/3 Shelf bracket 186 Brushed nickel 1 Pc

Art. Description Finish Q.ty EURO18,36

20,12

47,31

48,81

3,21

3,64

4,17

5,84

6,23

6,71

0,60

3,32

4,04

8,20

11,67

1,75

1,75

1,86

1,86

2,23

2,23

2,24

2,24

4,35

4,35

4,59

4,59

13,64

17,16

16,08

11,36

15,14

12,36

8,13

10,88

10,16

5,47

8,67

7,61

4,97

8,16

6,32

4,97

6,67

6,32

SYSTEMS FOR SHOWCASES AND SHELVES

Page 199 >>> CATALOGUE REFERENCE PAGE 984/989 >>>

REG520/95 Shelf bracket with stop 520 Nickel plated 1 Pc

REG540/95 Shelf bracket with stop 540 Nickel plated 1 Pc

REGDUO/95 Shelf bracket DUO Nickel plated 1 Pc

REGDUO/93 Shelf bracket DUO Brass-plated 1 Pc

MAGNETS

CAL001/6 Single push-open magnets Black 1 Pc

CAL002/6 Double push-open magnets Black 1 Pc

CAL003/1 Counterplate for push open magnets Chrome 1 Pc

CAL003/3 Counterplate for push open magnets Brushed nickel 1 Pc

CAL004/6 Counterplate for push open magnets Black 1 Pc

ACCESSORIES FOR SUSPENDED SHELVES WITH STEEL CABLE

NMS35/1 Wall dynamic conical swivel fitting Chrome 1 Pc

NMS14/1 Ceiling dynamic conical fitting Chrome 1 Pc

NMS15/1 Ceiling dynamic cylindrical fitting Chrome 1 Pc

NMS40/1 Final glass dynamic conical swivel fitting Chrome 1 Pc

NMS45/1 Final glass dynamic conical fitting Chrome 1 Pc

NMS50/1 Continuation glass dynamic conical swivel fitting Chrome 1 Pc

NMS75/1 Dynamic conical fitting Chrome 1 Pc

Art. Description Finish Q.ty EURO3,46

3,29

1,46

1,46

2,83

4,81

2,48

4,06

1,82

48,68

11,94

11,70

48,92

37,71

52,34

45,24

SYSTEMS FOR SHOWCASES AND SHELVES

Page 200 >>> CATALOGUE REFERENCE PAGE 889/994 >>>

NMS16/95 Dynamic fitting for shelves Nickel plated 1 Pc

NMS006/1 Horizontal shelf bracket Chrome 1 Pc

NMS006/3 Horizontal shelf bracket Brushed nickel 1 Pc

NMS007/1 Vertical shelf bracket Chrome 1 Pc

NMS007/3 Vertical shelf bracket Brushed nickel 1 Pc

NMS008/1 Double and adjustable shelf bracket Chrome 1 Pc

NMS002/1 Shelf bracket for 6/8 mm glass panes Chrome 1 Pc

NMS002/3 Shelf bracket for 6/8 mm glass panes Brushed nickel 1 Pc

NMS003/1 Shelf bracket for 10/12 mm glass panes Chrome 1 Pc

NMS003/3 Shelf bracket for 10/12 mm glass panes Brushed nickel 1 Pc

NMS005/1 Cap Chrome 1 Pc

NMS005/3 Cap Brushed nickel 1 Pc

NMS004/1 Cable stop Chrome 1 Pc

NMS001 Coat. rope Ø 1 - Ø 1 .6 mm Per m

DCYDP150/9 Side stop with max. 2 mm cable run Machined steel (CNC) 1 Pc

DCYDP300/9 Central stop with max. 2 mm cable run Machined steel (CNC) 1 Pc

LARGE SIZED SHELF BRACKET SERIES REGTER

REGTER08/97 Shelf bracket profile without glass cut-out for 8mm glass, L 3000mm Matt aluminium 1 Pc

REGTER08/88 Shelf bracket profile without glass cut-out for 8mm glass, L 3000mm Brushed steel-effect aluminium 1 Pc

REGTER08/91 Shelf bracket profile without glass cut-out for 8mm glass, L 3000mm Polished aluminium 1 Pc

REGTER08/RAL Shelf bracket profile without glass cut-out for 8mm glass, L 3000mm RAL9010 polished 1 Pc

REGTER08/R2 Shelf bracket profile without glass cut-out for 8mm glass, L 3000mm RAL9005 matt 1 Pc

REGTER10/97 Shelf bracket profile without glass cut-out for 10mm glass, L 3000mm Matt aluminium 1 Pc

REGTER10/88 Shelf bracket profile without glass cut-out for 10mm glass, L 3000mm Brushed steel-effect aluminium 1 Pc

REGTER10/91 Shelf bracket profile without glass cut-out for 10mm glass, L 3000mm Polished aluminium 1 Pc

REGTER10/RAL Shelf bracket profile without glass cut-out for 10mm glass, L 3000mm RAL9010 polished 1 Pc

REGTER10/R2 Shelf bracket profile without glass cut-out for 10mm glass, L 3000mm RAL9005 matt 1 Pc

REGTER12/97 Shelf bracket profile without glass cut-out for 12mm glass, L 3000mm Matt aluminium 1 Pc

REGTER12/88 Shelf bracket profile without glass cut-out for 12mm glass, L 3000mm Brushed steel-effect aluminium 1 Pc

REGTER12/91 Shelf bracket profile without glass cut-out for 12mm glass, L 3000mm Polished aluminium 1 Pc

REGTER12/RAL Shelf bracket profile without glass cut-out for 12mm glass, L 3000mm RAL9010 polished 1 Pc

REGTER12/R2 Shelf bracket profile without glass cut-out for 12mm glass, L 3000mm RAL9005 matt 1 Pc

Art. Description Finish Q.ty EURO9,51

9,54

11,83

6,57

8,41

33,22

6,57

8,08

6,50

8,08

9,01

11,75

2,76

3,19

9,18

14,36

125,02

184,73

192,64

168,61

168,61

138,59

205,73

214,51

179,68

179,68

153,04

228,56

236,94

189,05

189,05

SYSTEMS FOR SHOWCASES AND SHELVES

Page 201 >>> CATALOGUE REFERENCE PAGE 994/995 >>>

REGTP08/97 Pair of caps without holes for REGTER08 Matt aluminium 1 Kt

REGTP08/88 Pair of caps without holes for REGTER08 Brushed steel-effect aluminium 1 Kt

REGTP08/91 Pair of caps without holes for REGTER08 Polished aluminium 1 Kt

REGTP08/RAL Pair of caps without holes for REGTER08 RAL9010 polished 1 Kt

REGTP08/R2 Pair of caps without holes for REGTER08 RAL9005 matt 1 Kt

REGTP10/97 Pair of caps without holes for REGTER10 Matt aluminium 1 Kt

REGTP10/88 Pair of caps without holes for REGTER10 Brushed steel-effect aluminium 1 Kt

REGTP10/91 Pair of caps without holes for REGTER10 Polished aluminium 1 Kt

REGTP10/RAL Pair of caps without holes for REGTER10 RAL9010 polished 1 Kt

REGTP10/R2 Pair of caps without holes for REGTER10 RAL9005 matt 1 Kt

REGTP12/97 Pair of caps without holes for REGTER12 Matt aluminium 1 Kt

REGTP12/88 Pair of caps without holes for REGTER12 Brushed steel-effect aluminium 1 Kt

REGTP12/91 Pair of caps without holes for REGTER12 Polished aluminium 1 Kt

REGTP12/RAL Pair of caps without holes for REGTER12 RAL9010 polished 1 Kt

REGTP12/R2 Pair of caps without holes for REGTER12 RAL9005 matt 1 Kt

REGTP08AP/97 Pair of open caps without holes for REGTER08 Matt aluminium 1 Kt

REGTP08AP/88 Pair of open caps without holes for REGTER08 Brushed steel-effect aluminium 1 Kt

REGTP08AP/91 Pair of open caps without holes for REGTER08 Polished aluminium 1 Kt

REGTP08AP/RAL Pair of open caps without holes for REGTER08 RAL9010 polished 1 Kt

REGTP08AP/R2 Pair of open caps without holes for REGTER08 RAL9005 matt 1 Kt

REGTP10AP/97 Pair of open caps without holes for REGTER10 Matt aluminium 1 Kt

REGTP10AP/88 Pair of open caps without holes for REGTER10 Brushed steel-effect aluminium 1 Kt

REGTP10AP/91 Pair of open caps without holes for REGTER10 Polished aluminium 1 Kt

REGTP10AP/RAL Pair of open caps without holes for REGTER10 RAL9010 polished 1 Kt

REGTP10AP/R2 Pair of open caps without holes for REGTER10 RAL9005 matt 1 Kt

REGTP12AP/97 Pair of open caps without holes for REGTER12 Matt aluminium 1 Kt

REGTP12AP/88 Pair of open caps without holes for REGTER12 Brushed steel-effect aluminium 1 Kt

REGTP12AP/91 Pair of open caps without holes for REGTER12 Polished aluminium 1 Kt

REGTP12AP/RAL Pair of open caps without holes for REGTER12 RAL9010 polished 1 Kt

REGTP12AP/R2 Pair of open caps without holes for REGTER12 RAL9005 matt 1 Kt

REGTP08VIT/97 Pair of caps with holes and screws for REGTER08 Matt aluminium 1 Kt

REGTP08VIT/88 Pair of caps with holes and screws for REGTER08 Brushed steel-effect aluminium 1 Kt

REGTP08VIT/91 Pair of caps with holes and screws for REGTER08 Polished aluminium 1 Kt

REGTP08VIT/RAL Pair of caps with holes and screws for REGTER08 RAL9010 polished 1 Kt

REGTP08VIT/R2 Pair of caps with holes and screws for REGTER08 RAL9005 matt 1 Kt

REGTP10VIT/97 Pair of caps with holes and screws for REGTER10 Matt aluminium 1 Kt

REGTP10VIT/88 Pair of caps with holes and screws for REGTER10 Brushed steel-effect aluminium 1 Kt

REGTP10VIT/91 Pair of caps with holes and screws for REGTER10 Polished aluminium 1 Kt

REGTP10VIT/RAL Pair of caps with holes and screws for REGTER10 RAL9010 polished 1 Kt

REGTP10VIT/R2 Pair of caps with holes and screws for REGTER10 RAL9005 matt 1 Kt

REGTP12VIT/97 Pair of caps with holes and screws for REGTER12 Matt aluminium 1 Kt

REGTP12VIT/88 Pair of caps with holes and screws for REGTER12 Brushed steel-effect aluminium 1 Kt

REGTP12VIT/91 Pair of caps with holes and screws for REGTER12 Polished aluminium 1 Kt

REGTP12VIT/RAL Pair of caps with holes and screws for REGTER12 RAL9010 polished 1 Kt

REGTP12VIT/R2 Pair of caps with holes and screws for REGTER12 RAL9005 matt 1 Kt

Art. Description Finish Q.ty EURO13,46

23,72

23,72

10,04

10,04

13,69

23,95

23,95

10,26

10,26

13,91

24,18

24,18

10,49

10,49

13,46

23,72

23,72

10,04

10,04

13,69

23,95

23,95

10,26

10,26

13,91

24,18

24,18

10,49

10,49

20,53

30,79

30,79

17,11

17,11

20,53

30,79

30,79

17,11

17,11

21,10

31,36

31,36

17,68

17,68

SYSTEMS FOR SHOWCASES AND SHELVES

Page 202 >>> CATALOGUE REFERENCE PAGE 997/1002 >>>

LEDs FOR INDOORS

LED3528 5 metre reel with 120 LED SMD 3528 per metre, colour 4000K (white) 1 Pc

LED5050 5 metre reel with 60 LED SMD 5050 per metre, colour 4000K (white) 1 Pc

LED2835 5 metre reel with 168 LED SMD 2835 per metre, colour 4000K (white) 1 Pc

LED5050RGB 5 metre reel with 60 LED SMD 5050 per metre, colour RGB 1 Pc

LED2835CCT 5 metre reel with 120 LED SMD 2835 per metre, colour from 2700K to 6000K (white) 1 Pc

LEDCCT Control unit and remote control, dynamic white. 1 Pc

LEDCRGB RGB control unit 1 Pc

LED12030 Power supply 12Vdc 30W 1 Pc

LED12050 Power supply 12Vdc 50W 1 Pc

LED12075 Power supply 12Vdc 75W 1 Pc

LED24035IP Power supply 24Vdc 35W IP67 1 Pc

LED24050 Power supply 24Vdc 50W 1 Pc

LED24100 Power supply 24Vdc 100W 1 Pc

LARGE SIZED SHELF BRACKET

NRM4000/15 Quantum 4000 shelf bracket Polished steel 1 Pc

NRM4000/8 Quantum 4000 shelf bracket Brushed steel 1 Pc

NRM3000/15 Quantum 3000 shelf bracket Polished steel 1 Pc

NRM3000/8 Quantum 3000 shelf bracket Brushed steel 1 Pc

NRM8040/91 Shelf bracket 8040 Polished aluminium 1 Pc

NRM8040/97 Shelf bracket 8040 Matt aluminium 1 Pc

ROD SHELF BRACKET

REGASTA200/1 Rod 200 Chrome 1 Pc

REGASTA200/97 Rod 200 Matt aluminium 1 Pc

REGASTA150/1 Rod 150 Chrome 1 Pc

REGASTA150/97 Rod 150 Matt aluminium 1 Pc

SHELF BRACKETS

NRM18300/1 Shelf bracket 18300 Chrome 1 Pc

NRM18300/3 Shelf bracket 18300 Brushed nickel 1 Pc

NRM222/1 Shelf bracket RM 222 Chrome 1 Pc

NRM222/3 Shelf bracket RM 222 Brushed nickel 1 Pc

Art. Description Finish Q.ty EURO

112,40

139,50

184,66

156,06

162,59

169,61

65,23

52,19

81,79

82,80

61,22

76,78

146,03

243,06

233,89

152,84

143,90

50,98

31,91

18,31

15,27

17,00

14,74

42,20

46,53

42,20

46,53

SYSTEMS FOR SHOWCASES AND SHELVES

Page 203 >>> CATALOGUE REFERENCE PAGE 1003/1007 >>>

NRM3200/1 Shelf bracket 3200 Chrome 1 Pc

NRM3200/92 Shelf bracket 3200 Matt nickel 1 Pc

NRM1432/1 Shelf bracket 1432 Chrome 1 Pc

NRM1432/3 Shelf bracket 1432 Brushed nickel 1 Pc

NRM1432/97 Shelf bracket 1432 Matt aluminium 1 Pc

NRM1221/1 Shelf bracket 1221 Chrome 1 Pc

NRM1221/3 Shelf bracket 1221 Brushed nickel 1 Pc

NRM1221/97 Shelf bracket 1221 Matt aluminium 1 Pc

NRM18200/1 Shelf bracket 18200 Chrome 1 Pc

NRM18200/3 Shelf bracket 18200 Brushed nickel 1 Pc

NRM1222/1 Shelf bracket 1222 Chrome 1 Pc

NRM1222/2 Shelf bracket 1222 Gold 1 Pc

NRM1222/3 Shelf bracket 1222 Brushed nickel 1 Pc

NRM1222/97 Shelf bracket 1222 Matt aluminium 1 Pc

NRM104/1 Shelf bracket RM 140 Chrome 1 Pc

NRM104/3 Shelf bracket RM 140 Brushed nickel 1 Pc

NRM1433/1 Shelf bracket 1433 Chrome 1 Pc

NRM1433/3 Shelf bracket 1433 Brushed nickel 1 Pc

NRM1433/97 Shelf bracket 1433 Matt aluminium 1 Pc

NRM131/1 Shelf bracket 131 Chrome 1 Pc

NRM131/97 Shelf bracket 131 Matt aluminium 1 Pc

NRM740/1 Shelf bracket Onda Chrome 1 Pc

NRM740/97 Shelf bracket Onda Matt aluminium 1 Pc

NRMKA111/1 Shelf bracket Kaiman Chrome 1 Pc

NRMKA111/3 Shelf bracket Kaiman Brushed nickel 1 Pc

NRMKA125/1 Shelf bracket Kalabrone Chrome 1 Pc

NRMKA125/3 Shelf bracket Kalabrone Brushed nickel 1 Pc

Art. Description Finish Q.ty EURO40,03

26,79

35,22

41,12

23,85

38,66

42,58

28,91

26,23

29,65

28,54

28,54

31,79

23,13

23,91

27,24

36,82

41,47

22,46

18,56

11,68

23,47

16,76

26,55

25,94

19,77

22,58

SYSTEMS FOR SHOWCASES AND SHELVES

Page 204 >>> CATALOGUE REFERENCE PAGE 1007/1010 >>>

NRM532/1 Shelf bracket 532 Chrome 1 Pc

NRM532/97 Shelf bracket 532 Matt aluminium 1 Pc

NRM18800/97 Shelf bracket 18800 Matt aluminium 1 Pc

NRM18100/1 Shelf bracket 18100 Chrome 1 Pc

NRM18100/97 Shelf bracket 18100 Matt aluminium 1 Pc

NRM18700/97 Shelf bracket 18700 Matt aluminium 1 Pc

NRM18600/3 Shelf bracket 18600 Brushed nickel 1 Pc

NRM18600/6 Shelf bracket 18600 Matt black 1 Pc

NRM1550/1 Shelf bracket 1550 Chrome 1 Pc

NRM9100/1 Shelf bracket 9100 Chrome 1 Pc

NRM9100/97 Shelf bracket 9100 Matt aluminium 1 Pc

NRM9035/1 Shelf bracket 9035 Chrome 1 Pc

NRM9035/97 Shelf bracket 9035 Matt aluminium 1 Pc

NRM3060/1 Shelf bracket 3060 Chrome 1 Pc

NRM3060/97 Shelf bracket 3060 Matt aluminium 1 Pc

NRM60/1 Shelf bracket 60 Chrome 1 Pc

NRM60/97 Shelf bracket 60 Matt aluminium 1 Pc

NRM2002/1 Shelf bracket 2002 Chrome 1 Pc

NRM2002/3 Shelf bracket 2002 Brushed nickel 1 Pc

NRM2002/97 Shelf bracket 2002 Matt aluminium 1 Pc

Art. Description Finish Q.ty EURO18,07

10,04

16,56

19,07

14,05

15,31

23,71

23,71

35,04

26,63

13,63

9,75

6,22

24,92

16,25

10,18

6,29

12,74

13,24

12,37

SYSTEMS FOR SHOWCASES AND SHELVES

Page 205 >>> CATALOGUE REFERENCE PAGE 1011/1013 >>>

NRM3050/1 Shelf bracket 3050 Chrome 1 Pc

NRM3050/97 Shelf bracket 3050 Matt aluminium 1 Pc

NRM540/1 Shelf bracket 540 Chrome 1 Pc

NRM540/97 Shelf bracket 540 Matt aluminium 1 Pc

NRM1425/1 Shelf bracket 1425 Chrome 1 Pc

NRM1425/2 Shelf bracket 1425 Gold 1 Pc

NRM1425/3 Shelf bracket 1425 Brushed nickel 1 Pc

NRM29/1 Shelf bracket 29 Chrome 1 Pc

NRM29/97 Shelf bracket 29 Matt aluminium 1 Pc

NRM3040/1 Shelf bracket 3040 Chrome 1 Pc

NRM3040/97 Shelf bracket 3040 Matt aluminium 1 Pc

NRM9050/1 Shelf bracket 9050 Chrome 1 Pc

NRM9050/93 Shelf bracket 9050 Brass-plated 1 Pc

NRM9050/97 Shelf bracket 9050 Matt aluminium 1 Pc

NRM24/1 Shelf bracket 24 Chrome 1 Pc

NRM24/3 Shelf bracket 24 Brushed nickel 1 Pc

NRM24/93 Shelf bracket 24 Brass-plated 1 Pc

NRM8010/1 Shelf bracket 8010 Chrome 1 Pc

NRM8010/3 Shelf bracket 8010 Brushed nickel 1 Pc

NRM8010/93 Shelf bracket 8010 Brass-plated 1 Pc

NRM1424/1 Shelf bracket 1424 Chrome 1 Pc

NRM1424/2 Shelf bracket 1424 Gold 1 Pc

NRM1424/3 Shelf bracket 1424 Brushed nickel 1 Pc

NRM1850/1 Shelf bracket 1850 Chrome 1 Pc

NRM1850/3 Shelf bracket 1850 Brushed nickel 1 Pc

NRM1840/1 Shelf bracket 1840 Chrome 1 Pc

NRM1840/3 Shelf bracket 1840 Brushed nickel 1 Pc

NRM26/1 Shelf bracket 26 Chrome 1 Pc

NRM26/3 Shelf bracket 26 Brushed nickel 1 Pc

NRM26/93 Shelf bracket 26 Brass-plated 1 Pc

Art. Description Finish Q.ty EURO18,09

10,16

12,91

8,69

27,25

28,55

28,55

6,23

4,55

15,86

10,38

5,99

6,22

5,27

6,74

7,29

7,21

10,73

13,04

12,11

13,35

14,00

14,00

10,16

10,73

7,43

8,31

5,85

6,27

6,28

SYSTEMS FOR SHOWCASES AND SHELVES

Page 206 >>> CATALOGUE REFERENCE PAGE 1015/1017 >>>

RACK PROFILES

CREPK11/97 Central rack profile PK - Length 2013 mm Matt aluminium 1 Pc

CREPK13/97 Central rack profile PK - Length 3012 mm Matt aluminium 1 Pc

CREPK71/97 Side rack profile PK7 - Length 2013 mm Matt aluminium 1 Pc

CREPK73/97 Side rack profile PK7 - Length 3012 mm Matt aluminium 1 Pc

CRECPK1/97 CPK cover - Length 2013 mm Matt aluminium 1 Pc

CRECPK3/97 CPK cover - Length 3012 mm Matt aluminium 1 Pc

CRECLK1/97 CLK cover - Length 2013 mm Matt aluminium 1 Pc

CRECLK3/97 CLK cover - Length 3012 mm Matt aluminium 1 Pc

CREMDMA1/1 Drilled shelf DMA depth 180 mm Chrome 1 Pc

CREMDMA1/97 Drilled shelf DMA depth 180 mm Matt aluminium 1 Pc

CREMDMA2/1 Drilled shelf DMA depth 280 mm Chrome 1 Pc

CREMDMA2/97 Drilled shelf DMA depth 280 mm Matt aluminium 1 Pc

CREMDMA3/1 Drilled shelf DMA depth 380 mm Chrome 1 Pc

CREMDMA3/97 Drilled shelf DMA depth 380 mm Matt aluminium 1 Pc

CRESVDX1/1 Right SV cam Chrome 1 Pc

CRESVDX1 Right SV cam Transparent 1 Pc

CRESVCE2/1 Double central SV cam Chrome 1 Pc

CRESVCE2 Double central SV cam Transparent 1 Pc

CRESVSX3/1 Left SV cam Chrome 1 Pc

CRESVSX3 Left SV cam Transparent 1 Pc

CREVEN1 Suction cups for cams Transparent 1 Pc

CREDMAP1/1 DMAP hanger shelf Chrome 1 Pc

CREBPD20/1 Hanger-supporting tube complete with end caps Chrome 1 Pc

Art. Description Finish Q.ty EURO

68,43

85,54

62,22

81,79

25,38

37,07

52,89

75,56

37,22

17,56

43,89

22,58

85,54

45,62

3,96

1,98

3,76

2,14

3,96

1,85

1,08

91,24

94,09

SYSTEMS FOR UV BONDING

Page 207 >>> CATALOGUE REFERENCE PAGE 1021/1029 >>>

UV SHOWER

DOCCIAUVMUR/15 UV SHOWER Kit, wall/wall fitting in AISI 304 steel for 8/10 mm glass pane Polished steel 1 Set

DOCCIAUVMUR/8 UV SHOWER Kit, wall/wall fitting in AISI 304 steel for 8/10 mm glass pane Brushed steel 1 Set

GLMFT1000/15 Flat track 30x10 mm L=1000 mm, in AISI 304 steel, not drilled Polished steel 1 Pc

GLMFT1000/8 Flat track 30x10 mm L=1000 mm, in AISI 304 steel, not drilled Brushed steel 1 Pc

GLMFT2000/15 Flat track 30x10 mm L=2000 mm, in AISI 304 steel, not drilled Polished steel 1 Pc

GLMFT2000/8 Flat track 30x10 mm L=2000 mm, in AISI 304 steel, not drilled Brushed steel 1 Pc

GLMFT3000/15 Flat track 30x10 mm L=3000 mm, in AISI 304 steel, not drilled Polished steel 1 Pc

GLMFT3000/8 Flat track 30x10 mm L=3000 mm, in AISI 304 steel, not drilled Brushed steel 1 Pc

GLMUVFORO Cutting and drilling for UV accessories 1 Pc

GABDOCCIAUV Template for UV SHOWER 1 Pc

UV SHOWER KIT

DOCCIAUV05/15 Model with wall/wall bonding rollers for 8 mm glass pane Polished steel 1 Set

DOCCIAUV05/8 Model with wall/wall bonding rollers for 8 mm glass pane Brushed steel 1 Set

UV BONDING HINGES

CER700UV/15 700 hinge for UV bonding with adjustable snap, side with pull opening Polished steel 1 Pc

CER700UV/8 700 hinge for UV bonding with adjustable snap, side with pull opening Brushed steel 1 Pc

CER720UV/15 720 hinge for UV bonding with adjustable snap, 180° with pull opening Polished steel 1 Pc

CER720UV/8 720 hinge for UV bonding with adjustable snap, 180° with pull opening Brushed steel 1 Pc

FXGAB01/8 Mounting template for CER700UV and CER720UV hinges Brushed steel 1 Pc

CERUV1/15 UV 1 glass/glass snap hinge H 38 x L 90 mm Polished steel 1 Pc

CERUV1/8 UV 1 glass/glass snap hinge H 38 x L 90 mm Brushed steel 1 Pc

CERUV38/15 UV 38 glass/glass snap hinge H 38 x L 90 mm Polished steel 1 Pc

CERUV38/8 UV 38 glass/glass snap hinge H 38 x L 90 mm Brushed steel 1 Pc

FXGAB02/8 Mounting template for CERUV1 and CERUV38 hinges, set consisting of 4pcs Brushed steel 1 Set

Art. Description Finish Q.ty EURO

216,80

223,87

43,13

41,71

63,46

60,93

149,97

104,67

72,99

18,61

548,61

532,54

95,38

95,38

151,01

151,01

12,55

65,57

63,53

65,28

65,28

72,99

SYSTEMS FOR UV BONDING

Page 208 >>> CATALOGUE REFERENCE PAGE 1030/1037 >>>

CERLMSX/95 Left snap hinge with built-in brake technology Nickel plated 1 Pc

CERLMDX/95 Right snap hinge with built-in brake technology Nickel plated 1 Pc

LMGAB01 Template for fixing the CERLM hinge 1 Pc

CERBA2/95 BA2 wood / glass snap hinge L 70 x 40 mm Nickel plated 1 Pc

CER360UV/8 Glass / wood hinge for cases with visible joint for doors to stop Brushed steel 1 Pc

CERUVQ/9 UV square glass / glass hinge L 46.5 x H 17 mm Machined steel (CNC) 1 Pc

CERUVTON/9 UV round glass / glass hinge Ø 47 mm Machined steel (CNC) 1 Pc

FXGAB03/8 Mounting template for CERUVQ and CERUVTON hinges Brushed steel 1 Pc

CEA42DX/15 AUREA series glass/glass right steel hinge 50 x 15 mm Polished steel 1 Pair

CEA42SX/15 AUREA series glass/glass left steel hinge 50 x 15 mm Polished steel 1 Pair

FXGAB04/8 Mounting template for CEA42 right end and left end hinges Brushed steel 1 Pc

CERUV390/1 Glass/glass hinge free for bonding Polished chrome 1 Pc

CERUV390/3 Glass/glass hinge free for bonding Brushed nickel 1 Pc

FXGAB05/8 Mounting template for CERUV390 hinge, set consisting of 4Pcs Brushed steel 1 Set

Art. Description Finish Q.ty EURO29,17

29,17

15,09

23,17

56,80

60,32

52,92

29,20

77,57

77,57

19,16

29,20

29,20

83,03

SYSTEMS FOR UV BONDING

Page 209 >>> CATALOGUE REFERENCE PAGE 1038/1044 >>>

CEALL35D/90 Aluminium glass/glass hinge 65x35 mm right end Machined aluminium 1 Pair

CEALL35S/90 Aluminium glass/glass hinge 65x35 mm left end Machined aluminium 1 Pair

CELEGA35D/90 Aluminium wood/glass hinge 65x35 mm right end Machined aluminium 1 Pair

CELEGA35S/90 Aluminium wood/glass hinge 65x35 mm left end Machined aluminium 1 Pair

CEACC40D/8 AISI 304 glass/glass hinge 65x35 mm right end Brushed steel 1 Pair

CEACC40S/8 AISI 304 glass/glass hinge 65x35 mm left end Brushed steel 1 Pair

CEACC50D/8 AISI 304 wood/glass hinge 65x35 mm right end Brushed steel 1 Pair

CEACC50S/8 AISI 304 wood/glass hinge 65x35 mm left end Brushed steel 1 Pair

FXGAB06/8 Template for fixing hinges Brushed steel 1 Set

CEALL35, CELEGA35, CEACC40 and CEACC50

CERUV55/1 Glass/glass free UV 55 hinge Chrome 1 Pair

FXGAB07/8 Template for mounting CERUV55 hinges Brushed steel 1 Pc

RECTANGULAR HINGES AND LOCKS UV BONDING

CERUVS100/1 Rectangular upper and lower hinge glass/glass, 44x30mm Chrome 1 Pc

CERUVS100/97 Rectangular upper and lower hinge glass/glass, 44x30mm Matt aluminium 1 Pc

SERUVS01/1 Angular single door lock, 40x30mm, for glass thickness 4/5mm Chrome 1 Pc

SERUVS01/97 Angular single door lock, 40x30mm, for glass thickness 4/5mm Matt aluminium 1 Pc

SERUVS03/1 Angular single door lock, 40x30mm, for glass thickness 6/6.75mm Chrome 1 Pc

SERUVS03/97 Angular single door lock, 40x30mm, for glass thickness 6/6.75mm Matt aluminium 1 Pc

SERUVS05/1 Lower single door lock, 40x42mm Chrome 1 Pc

SERUVS05/97 Lower single door lock, 40x42mm Matt aluminium 1 Pc

SERUVS07/1 Lower double door lock, 40x42mm Chrome 1 Pc

SERUVS07/97 Lower double door lock, 40x42mm Matt aluminium 1 Pc

UV BONDING UV40 HINGES AND LOCKS

CERUV40/15 Pair of UV hinges glass/glass pivot Polished steel 1 Cp

CERUV40/8 Pair of UV hinges glass/glass pivot Brushed steel 1 Cp

CERUV40LG/15 Pair of UV hinges wood/glass pivot Polished steel 1 Cp

CERUV40LG/8 Pair of UV hinges wood/glass pivot Brushed steel 1 Cp

Art. Description Finish Q.ty EURO38,78

38,78

39,92

39,92

85,84

85,84

93,79

93,79

19,16

64,22

19,16

38,03

39,87

20,25

23,77

20,25

23,77

20,20

23,87

21,88

24,81

68,88

68,88

74,18

74,18

SYSTEMS FOR UV BONDING

Page 210 >>> CATALOGUE REFERENCE PAGE 1045/1051 >>>

SERUV40U/15 UV lock glass/glass, single key Polished steel 1 Pc

SERUV40U/8 UV lock glass/glass, single key Brushed steel 1 Pc

SERUV40D/15 UV lock glass/glass, different key Polished steel 1 Pc

SERUV40D/8 UV lock glass/glass, different key Brushed steel 1 Pc

SERUV40LGU/15 UV lock wood/glass, single key Polished steel 1 Pc

SERUV40LGU/8 UV lock wood/glass, single key Brushed steel 1 Pc

SERUV40LGD/15 UV lock wood/glass, different key Polished steel 1 Pc

SERUV40LGD/8 UV lock wood/glass, different key Brushed steel 1 Pc

FXGAB14/8 Template for fixing UV40 hinges and locks Brushed steel 1 Pc

UV BONDING EGG HINGES AND LOCKS

CERUV35/9 UV 35 EGG glass/glass hinge Ø 30 x H 31 mm Machined steel (CNC) 1 Pair

CERUV25/9 UV 25 EGG glass/glass hinge Ø 20 x H 23 mm Machined steel (CNC) 1 Pair

CERUV35LG/9 UV 35 LG EGG wood/glass hinge Ø 30 x H 31 mm Machined steel (CNC) 1 Pair

CERUV25LG/9 UV 25 LG EGG wood/glass hinge Ø 20 x H 23 mm Machined steel (CNC) 1 Pair

FXGAB08/8 Template for fixing CERUV35 hinges, Brushed steel 1 Pc

CERUV35LG, CERUV25 and CERUV25LG

SEREGG10U/9 UV EGG lock with fixing plate on wood Machined steel (CNC) 1 Pc

single key Ø 30 x 27 mm

SEREGG10D/9 UV EGG lock with fixing plate on wood Machined steel (CNC) 1 Pc

different key Ø 30 x 27 mm

SEREGG13U/9 UV EGG lock with fixing plate for one door at 90° Machined steel (CNC) 1 Pc

single key Ø 30 x 27 mm

SEREGG13D/9 UV EGG lock with fixing plate for one door at 90° Machined steel (CNC) 1 Pc

different key Ø 30 x 27 mm

SEREGG15U/9 UV EGG lock with fixing plate for double door at 180° Machined steel (CNC) 1 Pc

single key Ø 30 x 27 mm

SEREGG15D/9 EGG UV lock 180° double door installation Machined steel (CNC) 1 Pc

different key Ø 30 x 27 mm

UV BONDING LOCKS

SERUV100U/15 SERUV100 glass/glass side lock single key H 50 x L 44 x D 26 mm Polished steel 1 Pc

SERUV100U/8 SERUV100 glass/glass side lock single key H 50 x L 44 x D 26 mm Brushed steel 1 Pc

SERUV100D/15 SERUV100 glass/glass side lock different key H 50 x L 44 x D 26 mm Polished steel 1 Pc

SERUV100D/8 SERUV100 glass/glass side lock different key H 50 x L 44 x D 26 mm Brushed steel 1 Pc

SERUV150U/15 SERUV150 glass/glass in line lock single key H 50 x L 72 x D 26 mm Polished steel 1 Pc

SERUV150U/8 SERUV150 glass/glass in line lock single key H 50 x L 72 x D 26 mm Brushed steel 1 Pc

SERUV150D/15 SERUV150 glass/glass in line lock different key H 50 x L 72 x D 26 mm Polished steel 1 Pc

SERUV150D/8 SERUV150 glass/glass in line lock different key H 50 x L 72 x D 26 mm Brushed steel 1 Pc

FXGAB09/8 Template for mounting SERUV100 and SERUV150 locks Brushed steel 1 Pc

Art. Description Finish Q.ty EURO85,84

85,84

85,84

85,84

88,49

88,49

88,49

88,49

27,37

73,95

60,96

98,93

86,94

14,14

81,89

80,99

82,00

80,99

80,45

80,45

87,66

89,57

88,14

89,09

101,55

103,22

101,07

102,62

19,64

SYSTEMS FOR UV BONDING

Page 211 >>> CATALOGUE REFERENCE PAGE 1052/1056 >>>

SERUV41U/8 SERUV41 wood/glass side lock single key H 40 x L 30 x D 26 mm Brushed steel 1 Pc

SERUV41D/8 SERUV41 wood/glass side lock different key H 40 x L 30 x D 26 mm Brushed steel 1 Pc

SEA46/9 950 UV lock Ø 35 x H 21.5 mm Machined steel (CNC) 1 Pc

SOFTSTOP UV BONDING

SOFTUV10/9 UV Softstop for glass doors light force L 56 x 14 x H 14 mm Machined steel (CNC) 1 Pc

SOFTUV18/9 UV Softstop for glass doors medium force L 56 x 14 x H 14 mm Machined steel (CNC) 1 Pc

UV BONDING PUSH-OPEN MAGNETS

CAL17/9 Square UV push-open magnet L 47 x 16 x H 16 mm Machined steel (CNC) 1 Pc

CAL18/9 Round UV push-open magnet L 47 x 9.3 x Ø 18 mm Machined steel (CNC) 1 Pc

UV BONDING MAGNETS

CAL009/9 Single UV magnet L 11 x H 12 mm Machined steel (CNC) 1 Pc

CAL010/9 Double UV magnet L 30 x H 12 mm Machined steel (CNC) 1 Pc

CALUV25/9 AISI 304 UV magnet 25 x 25 x 25 mm Machined steel (CNC) 1 Pc

CALUV50/9 UV magnet with AISI 304 door 50 x 25 x 25 mm Machined steel (CNC) 1 Pc

CAL23/9 UV single magnet wood/glass H 11.5 x L 11 x D 18 mm Machined steel (CNC) 1 Pc

CAL27/9 UV double magnet wood/glass H 11.5 x L 39 x D 11.5 mm Machined steel (CNC) 1 Pc

UV BONDING SHELF BRACKETS

REGUV44/9 UV adjustable shelf bracket 13 x 17 x Ø 26.4 mm Machined steel (CNC) 1 Pc

REGA15/9 UV shelf bracket Ø 15 mm Machined steel (CNC) 1 Pc

REGA20/9 UV shelf bracket Ø 20 mm Machined steel (CNC) 1 Pc

REGECC20/9 Eccentric UV shelf bracket Ø 20 mm Machined steel (CNC) 1 Pc

Art. Description Finish Q.ty EURO48,86

49,82

75,73

41,86

41,86

43,98

41,33

19,62

29,42

45,03

49,34

21,79

32,57

13,99

7,74

9,24

21,48

SYSTEMS FOR UV BONDING

Page 212 >>> CATALOGUE REFERENCE PAGE 1057/1059 >>>

UV BONDING BOLTS

CHLUV10/9 UV Bolt glass/glass Ø 10 x H 50 x D 8 mm Machined steel (CNC) 1 Pc

CHLUV20/9 UV Bolt glass/glass Ø 20 x H 66 x D 13 mm Machined steel (CNC) 1 Pc

VETDISC20/9 Fitting for bonding knobs Ø 20 mm Machined steel (CNC) 1 Pc

VETDISC30/9 Fitting for bonding knobs Ø 30 mm Machined steel (CNC) 1 Pc

UV BONDING KNOBS

POMUV16/15 Steel knob 16 x 16mm H=20mm Polished steel 1 Pc

POMUV16/8 Steel knob 16 x 16mm H=20mm Brushed steel 1 Pc

POMUV9/9 Steel knob 25 x 25 x 25mm with grip Machined steel (CNC) 1 Pc

POMUV3/9 Flat head steel knob with concentric circles, Ø 28 x H 25.5 mm Machined steel (CNC) 1 Pc

POMUV17/9 Flat head steel knob with grip, Ø 28 x H 25.5 mm Machined steel (CNC) 1 Pc

POMUV15/9 Smooth flat head UV 15 knob Ø 30 x H 26 mm Machined steel (CNC) 1 Pc

POMUV11/9 Smooth flat head UV 11 knob Ø 20 x H 26 mm Machined steel (CNC) 1 Pc

UV BONDING HANDLES

MNUV12062/8 SQUARE handle 120 x 60mm to be applied to glass with UV adhesive Brushed steel 1 Pc

MNUV10057/8 SQUARE handle 100 x 57mm to be applied to glass with UV adhesive Brushed steel 1 Pc

MNUV6540/8 SQUARE handle 65 x 40mm to be applied to glass with UV adhesive Brushed steel 1 Pc

MAUVT60/9 Round handle Ø 60 mm to be applied to glass with UV adhesive Machined steel (CNC) 1 Pc

Art. Description Finish Q.ty EURO

36,47

53,96

12,32

15,51

15,99

16,99

19,29

11,66

11,66

20,62

15,99

60,46

54,88

41,43

29,59

SYSTEMS FOR UV BONDING

Page 213 >>> CATALOGUE REFERENCE PAGE 1060/1063 >>>

MAUVQ40/9 Single square handle 40x40 mm Machined steel (CNC) 1 Pc

MAUVT40/9 Single round handle Ø 40 mm Machined steel (CNC) 1 Pc

FXGAB10/8 Template for mounting MAUVQ40 and MAUVT40 handles Brushed steel 1 Pc

UV BONDING GLASS DETAILS

CSFE20 Glass shelf support 20 radius 10 x H 12 mm Transparent 1 Pc

CSFE30 Glass shelf support 30 radius 15 x H 12 mm Transparent 1 Pc

CC000 Cubic glass shelf support 15x15x15 mm Transparent 1 Pc

CC001 Cubic glass shelf support 20x20x20 mm Transparent 1 Pc

CC002 Cubic glass shelf support 30x30x30 mm Transparent 1 Pc

PAR001 Parallelepiped D 20 x L 30 x H 15 mm Transparent 1 Pc

PAR002 Parallelepiped D 30 x L 30 x H 70 mm Transparent 1 Pc

PAR003 Parallelepiped D 40 x L 40 x H 70 mm Transparent 1 Pc

PAR004 Parallelepiped D 50 x L 50 x H 80 mm Transparent 1 Pc

SFE001T Ball with stone smoothed bottom Ø 20 mm Transparent 1 Pc

SFE001S Ball with stone smoothed bottom Ø 20 mm Brushed 1 Pc

SFE002T Ball with stone smoothed bottom Ø 25 mm Transparent 1 Pc

SFE002S Ball with stone smoothed bottom Ø 25 mm Brushed 1 Pc

SFE003T Ball with stone smoothed bottom Ø 30 mm Transparent 1 Pc

SFE003S Ball with stone smoothed bottom Ø 30 mm Brushed 1 Pc

SFE004T Ball with stone smoothed bottom Ø 40 mm Transparent 1 Pc

SFE004S Ball with stone smoothed bottom Ø 40 mm Brushed 1 Pc

SFE005T Ball with stone smoothed bottom Ø 50 mm Transparent 1 Pc

SFE005S Ball with stone smoothed bottom Ø 50 mm Brushed 1 Pc

CVM01 Cylinder-knob in glass with grip Ø 40 x 60 mm Transparent 1 Pc

CVM03 Cylinder-knob in glass with grip Ø 20 x 30 mm Transparent 1 Pc

CVM05 Cylinder-knob in glass with grip Ø 15 x 26 mm Transparent 1 Pc

FXGAB11/8 Template for mounting the cylinder knob with grip CVM01 Brushed steel 1 Pc

FXGAB12/8 Template for mounting the cylinder knob with grip CVM03 Brushed steel 1 Pc

FXGAB13/8 Template for mounting the cylinder knob with grip CVM05 Brushed steel 1 Pc

Art. Description Finish Q.ty EURO37,84

18,20

22,03

11,31

12,07

7,54

13,33

17,88

14,83

50,47

55,48

77,55

13,57

15,05

14,66

16,02

14,66

16,02

18,19

20,30

22,35

24,81

54,57

24,41

22,41

21,90

19,16

18,25

SYSTEMS FOR UV BONDING

Page 214 >>> CATALOGUE REFERENCE PAGE 1064/1067 >>>

UV BONDING STEEL DISCS

DISC001/9 UV bonding steel disc Ø 100 x H 10 mm x M10 Machined steel (CNC) 1 Pc

DISC003/9 UV bonding steel disc Ø 75 x H 10 mm x M10 Machined steel (CNC) 1 Pc

DISC036/9 UV bonding steel disc Ø 60 x H 10 mm x M10 Machined steel (CNC) 1 Pc

DISC002/9 UV bonding steel disc Ø 50 x H 10mm x M10 Machined steel (CNC) 1 Pc

DISC004/9 UV bonding steel disc Ø 50 x H 10 mm x M8 Machined steel (CNC) 1 Pc

DISC0055/9 UV bonding steel disc Ø 45 x H 10 mm x M6 Machined steel (CNC) 1 Pc

DISC005/9 UV bonding steel disc Ø 40 x H 10 mm x M10 Machined steel (CNC) 1 Pc

DISC006/9 UV bonding steel disc Ø 40 x H 10 mm x M6 Machined steel (CNC) 1 Pc

DISC007/9 UV bonding steel disc Ø 35 x H 10 mm x M10 Machined steel (CNC) 1 Pc

DISC008/9 UV bonding steel disc Ø 30 x H 10 mm x M8 Machined steel (CNC) 1 Pc

DISC009/9 UV bonding steel disc Ø 25 x H 6 mm x M6 Machined steel (CNC) 1 Pc

DISC151/9 UV bonding steel disc for M10 wheels Ø 100/ 40x H 22 mm x M10 Machined steel (CNC) 1 Pc

DISC152/9 UV bonding steel disc for M10 wheels Ø 75/30x H 22 mm x M10 Machined steel (CNC) 1 Pc

DISC153/9 UV bonding steel disc for M10 wheels Ø 50/20x H 22 mm x M10 Machined steel (CNC) 1 Pc

MGRAN12/9 AISI 304 steel hex socket head grub screw 50 mm x M10 Machined steel (CNC) 1 Pc

MGRAN11/9 AISI 304 steel hex socket head grub screw 45 mm x M10 Machined steel (CNC) 1 Pc

MGRAN1/9 AISI 304 steel hex socket head grub screw 40 mm x M10 Machined steel (CNC) 1 Pc

MGRAN15/9 AISI 304 steel hex socket head grub screw 30 mm x M10 Machined steel (CNC) 1 Pc

MGRAN2/9 AISI 304 steel hex socket head grub screw 25 mm x M10 Machined steel (CNC) 1 Pc

MGRAN22/9 AISI 304 steel hex socket head grub screw 20 mm x M10 Machined steel (CNC) 1 Pc

MGRAN3/9 AISI 304 steel hex socket head grub screw 16 mm x M10 Machined steel (CNC) 1 Pc

MGRAN42/9 AISI 304 steel hex socket head grub screw 50 mm x M8 Machined steel (CNC) 1 Pc

MGRAN43/9 AISI 304 steel hex socket head grub screw 45 mm x M8 Machined steel (CNC) 1 Pc

MGRAN44/9 AISI 304 steel hex socket head grub screw 40 mm x M8 Machined steel (CNC) 1 Pc

MGRAN45/9 AISI 304 steel hex socket head grub screw 35 mm x M8 Machined steel (CNC) 1 Pc

MGRAN451/9 AISI 304 steel hex socket head grub screw 30 mm x M8 Machined steel (CNC) 1 Pc

MGRAN46/9 AISI 304 steel hex socket head grub screw 25 mm x M8 Machined steel (CNC) 1 Pc

MGRAN47/9 AISI 304 steel hex socket head grub screw 20 mm x M8 Machined steel (CNC) 1 Pc

MGRAN4/9 AISI 304 steel hex socket head grub screw 16 mm x M8 Machined steel (CNC) 1 Pc

MGRAN41/9 AISI 304 steel hex socket head grub screw 14 mm x M8 Machined steel (CNC) 1 Pc

MGRAN55/9 AISI 304 steel hex socket head grub screw 20 mm x M6 Machined steel (CNC) 1 Pc

MGRAN5/9 AISI 304 steel hex socket head grub screw 16 mm x M6 Machined steel (CNC) 1 Pc

MGRAN7/9 AISI 304 steel hex socket head grub screw 10 mm x M6 Machined steel (CNC) 1 Pc

TABLE LEGS

GAMB60A/1 Metal leg Ø 60 mm with disc AISI 304 Ø 100 H 720 mm Chrome 1 Pc

GAMB60B/1 Metal leg Ø 60 mm with disc AISI 304 Ø 75 H 720 mm Chrome 1 Pc

GAMB3C/1 Metal leg Ø 42 mm with disc AISI 304 Ø 75 H 710 mm Chrome

GAMB130/1 Metal leg Ø 80 mm with disc AISI 304 Ø 100 H 720 mm Chrome 1 Pc

GAMB127/1 Metal leg Ø 60 mm with disc AISI 304 Ø 75 H 720 mm Chrome 1 Pc

ST4151/8 Round table base Ø 400 x H 730 mm Brushed steel 1 Pc

ST4411/8 Round table base Ø 450 x H 730 mm Brushed steel 1 Pc

ST4421/8 Square table base 450x450 x H 730 mm Brushed steel 1 Pc

Art. Description Finish Q.ty EURO

47,44

27,98

21,76

16,94

16,71

14,77

13,99

13,99

10,72

9,87

8,55

63,41

43,79

24,86

1,84

1,80

1,46

1,15

1,03

0,88

0,80

1,23

1,19

0,96

0,88

0,80

0,72

0,60

0,50

0,50

0,44

0,39

0,33

151,32

102,67

OUT OF PRODUCTION

104,53

61,78

334,75

320,95

334,75

SYSTEMS FOR UV BONDING

Page 215 >>> CATALOGUE REFERENCE PAGE 1068/1070 >>>

WHEELS

RUOT115011/1 Wheel art 1150 Ø 75 x H 100 mm with stop Chrome/grey 1 Pc

RUOT114010/1 Wheel art 1140 Ø 75 x H 100 mm without stop Chrome/grey 1 Pc

RUOTA99004 Wheel art 990 Ø 50 x H 63 mm with stop Black 1 Pc

RUOTA98003 Wheel art 980 Ø 50 x H 63 mm without stop Black 1 Pc

RUOT100005/1 Wheel art 1000 Ø 50 x H 62 mm without stop Black and chrome-plated metal 1 Pc

RUOTA40 Wheel art 40 Ø 40 x H 52 mm without stop Black 1 Pc

RUOTA36 Wheel art 36 Ø 36 x H 40 mm without stop Black 1 Pc

RUOTA70C/1 Wheel art 70C Ø 90 x H 120 mm with stop Chrome 1 Pc

RUOTA70A/97 Wheel art 70A Ø 90 x H 120 mm with stop Matt aluminium 1 Pc

RUOT125018/1 Wheel art 1250 Ø 80 x H 135 mm without stop Chrome/transparent 1 Pc

UV BONDING FEET

PIEDUV32/9 UV bonding support foot with PVC base Machined steel (CNC) 1 Pc

PIEDACC20/9 UV bonding adjustment foot Ø 20 x H 30 mm Machined steel (CNC) 1 Pc

PIEDUV25/9 UV bonding adjustment foot with screw Ø 25 x H 25+7 mm Machined steel (CNC) 1 Pc

PIEDUV35/9 UV bonding adjustment foot with screw Ø 35 x H 35+9 mm Machined steel (CNC) 1 Pc

PIEDUV50/9 UV bonding adjustment foot with screw Ø 50 x H 50+9.5 mm Machined steel (CNC) 1 Pc

Art. Description Finish Q.ty EURO

13,23

11,50

4,55

3,83

15,05

5,02

5,02

34,49

29,22

43,79

30,18

20,72

15,33

21,32

39,76

SYSTEMS FOR UV BONDING

Page 216 >>> CATALOGUE REFERENCE PAGE 1074/1078 >>>

UV BONDING - ADHESIVES

FX10,100 FIXGLASS UV 10 adhesive 100 g - visible light 1 Pc

FX10,250 FIXGLASS UV 10 adhesive 250 g - visible light 1 Pc

FX10,1000 FIXGLASS UV 10 adhesive 1000 g - visible light 1 Pc

FX627,100 FIXGLASS UV 627 adhesive 100 gr 1 Pc

FX627,250 FIXGLASS UV 627 adhesive 250 gr 1 Pc

FX627,1000 FIXGLASS UV 627 adhesive 1000 gr 1 Pc

FX635,100 FIXGLASS UV 635 adhesive 100 gr - visible light 1 Pc

FX635,250 FIXGLASS UV 635 adhesive 250 gr - visible light 1 Pc

FX635,1000 FIXGLASS UV 635 adhesive 1000 gr - visible light 1 Pc

FX630,100 FIXGLASS UV 630 adhesive 100 gr 1 Pc

FX630,250 FIXGLASS UV 630 adhesive 250 gr 1 Pc

FX630,1000 FIXGLASS UV 630 adhesive 1000 gr 1 Pc

FX621,100 FIXGLASS UV 621 adhesive 100 gr - visible light 1 Pc

FX621,250 FIXGLASS UV 621 adhesive 250 gr - visible light 1 Pc

FX621,1000 FIXGLASS UV 621 adhesive 1000 gr - visible light 1 Pc

FX629,100 FIXGLASS UV 629 adhesive 100 gr 1 Pc

FX629,250 FIXGLASS UV 629 adhesive 250 gr 1 Pc

FX629,1000 FIXGLASS UV 629 adhesive 1000 gr 1 Pc

FX973,100 FIXGLASS UV 973 adhesive 100 gr - visible light 1 Pc

FX973,250 FIXGLASS UV 973 adhesive 250 gr - visible light 1 Pc

FX973,1000 FIXGLASS UV 973 adhesive 1000 gr - visible light 1 Pc

UV BONDING - NEEDLES FOR ADHESIVES

FXGH Kit of 5 dispensing needles with adapter for bottles 1 Set

FXGH33 DUAL LOCK dispensing needle, Ø 0.33mm. Orange for FX627 adhesive 1 Pc

FXGH41 DUAL LOCK dispensing needle, Ø 0.41mm. Blue for FX627 adhesive 1 Pc

FXGH58 DUAL LOCK dispensing needle, Ø 0.58mm. Pink, for FX621 - FX635 adhesives 1 Pc

FXGH84 DUAL LOCK dispensing needle, Ø 0.84mm. Green, for FX621 - FX630 - FX635 adhesives 1 Pc

FXGH1.37 DUAL LOCK dispensing needle, Ø 1.37mm. Amber, for FX630 thick adhesives 1 Pc

FXADGH Adapter for dispensing needles to be screwed onto the bottles 1 Pc

UV BONDING - VERTICAL BONDING - GLASS WITH METAL

FXGEL30 FIX GLASS UV GEL adhesive 30gr 1 Pc

FXGEL03 Disposable plastic needles for FIX GLASS UV GEL cartridge - 5 Pc package 1 Pack

FX621GEL30 FIXGLASS UV 621 GEL adhesive 30 gr 1 Pc

FXGEL03 Disposable plastic needles for FIX GLASS UV GEL cartridge - 5 Pc package 1 Pack

Art. Description Q.ty EURO

100 gr627

Colore: TRASPARENTE TRASPARENTE TRASP | Viscosità: BASSA

PRINCIPPRINCIPALI MAALI MAALI MAALI MAPRINCIPALI MAPRINCIPPRINCIPALI MAPRINCIP TERIALITERIALIALI MATERIALIALI MAALI MATERIALIALI MADA INCOLLARE - VETRO CON:DA INCOLLARE - VETRO CON:DA INCOLLARE - VETRO CON:DA INCOLLARE - VETRO CON:

• • VVetretrVetrV oo

PRINCIPPRINCIPPRINCIPALI CAMPI DI UTILIZZO:ALI CAMPI DI UTILIZZO:ALI CAMPI DI UTILIZZO:ALI CAMPI DI UTILIZZO:ALI CAMPI DI UTILIZZO:ALI CAMPI DI UTILIZZO:PRINCIPALI CAMPI DI UTILIZZO:PRINCIPPRINCIPALI CAMPI DI UTILIZZO:PRINCIP• • Applicazioni che sfruttanApplicazioni che sfruttanApplicazioni che sfruttanApplicazioni che sfruttanApplicazioni che sfruttanoo

la capillaritàla capillaritàla capillarità• Costruzioni in vetro aperteCostruzioni in vetro aperte

100 gr635

Colore: TRASPARENTE TRASPARENTE TRASP | Viscosità: BASSA

PRINCIPPRINCIPALI MAALI MAALI MAALI MAPRINCIPALI MAPRINCIPPRINCIPALI MAPRINCIP TERIALITERIALIALI MATERIALIALI MAALI MATERIALIALI MADA INCOLLARE - VETRO CON:DA INCOLLARE - VETRO CON:DA INCOLLARE - VETRO CON:DA INCOLLARE - VETRO CON:

• VetretrVetrVVetrV o stratificatoo stratificatoo stratificato• VVetretrVetrVVetrV oo

LUCE VISIBILE LUCE VISIBILE LUCE VISIBILE LUCE VISIBILE

PRINCIPPRINCIPPRINCIPALI CAMPI DI UTILIZZO:ALI CAMPI DI UTILIZZO:ALI CAMPI DI UTILIZZO:ALI CAMPI DI UTILIZZO:ALI CAMPI DI UTILIZZO:ALI CAMPI DI UTILIZZO:PRINCIPALI CAMPI DI UTILIZZO:PRINCIP• Applicazioni che sfruttanApplicazioni che sfruttanoo

la capillarità•• Costruzioni in vetr Costruzioni in vetro aperteo aperte

100 gr630

Colore: TRASLUCIDO | Viscosità: MEDIA

PRINCIPPRINCIPALI MAALI MAALI MAALI MAPRINCIPALI MAPRINCIPPRINCIPALI MAPRINCIP TERIALITERIALIALI MATERIALIALI MAALI MATERIALIALI MADA INCOLLARE - VETRO CON:DA INCOLLARE - VETRO CON:DA INCOLLARE - VETRO CON:DA INCOLLARE - VETRO CON:

• Metallo - Acciaio inoxMetallo - Acciaio inoxMetallo - Acciaio inoxMetallo - Acciaio inox• V Vetretr Vetr V Vetr V oo

PRINCIPPRINCIPPRINCIPALI CAMPI DI UTILIZZO:ALI CAMPI DI UTILIZZO:ALI CAMPI DI UTILIZZO:ALI CAMPI DI UTILIZZO:ALI CAMPI DI UTILIZZO:ALI CAMPI DI UTILIZZO:ALI CAMPI DI UTILIZZO:PRINCIPALI CAMPI DI UTILIZZO:PRINCIP• Soluzioni sottoposte a carichiSoluzioni sottoposte a carichiSoluzioni sottoposte a carichiSoluzioni sottoposte a carichiSoluzioni sottoposte a carichi

sia statici che dinamicisia statici che dinamici• Costruzioni in vetro aperte

100 gr621

Colore: TRASLUCIDO | Viscosità: MEDIA

PRINCIPPRINCIPALI MAALI MAALI MAALI MAPRINCIPALI MAPRINCIPPRINCIPALI MAPRINCIP TERIALITERIALIALI MATERIALIALI MAALI MATERIALIALI MADA INCOLLARDA INCOLLARDA INCOLLARDA INCOLLAREE

VETRO STRAVETRO STRAVETRO STRATIFICATIFICATIFICAVETRO STRATIFICAVETRO STRAVETRO STRATIFICAVETRO STRA TO CON:TO CON:TIFICATO CON:TIFICATIFICATO CON:TIFICA• • VetretrVetrV o • • VetretrVetrV o stratificatoo stratificatoo stratificatoo stratificato

• • Metallo - Acciaio inoxMetallo - Acciaio inoxMetallo - Acciaio inoxMetallo - Acciaio inoxMetallo - Acciaio inox

LUCE VISIBILE LUCE VISIBILE LUCE VISIBILE LUCE VISIBILE LUCE VISIBILE

PRINCIPPRINCIPPRINCIPALI CAMPI DI UTILIZZO:ALI CAMPI DI UTILIZZO:ALI CAMPI DI UTILIZZO:PRINCIPALI CAMPI DI UTILIZZO:PRINCIPPRINCIPALI CAMPI DI UTILIZZO:PRINCIP• Soluzioni sottoposte a carichi

sia statici che dinamicisia statici che dinamici• Costruzioni in vetro aperte

100 gr10

Colore: TRASPARENTE TRASPARENTE TRASP | Viscosità: BASSA

PRINCIPPRINCIPALI MAALI MAALI MAALI MAPRINCIPALI MAPRINCIPPRINCIPALI MAPRINCIP TERIALITERIALIALI MATERIALIALI MAALI MATERIALIALI MADA INCOLLARE - VETRO CON:DA INCOLLARE - VETRO CON:DA INCOLLARE - VETRO CON:DA INCOLLARE - VETRO CON:

• VetrVetrV o o •• V Vetretr Vetr V Vetr V o stratificatoo stratificatoo stratificato

LUCE VISIBILE LUCE VISIBILE LUCE VISIBILE LUCE VISIBILE LUCE VISIBILE

PRINCIPPRINCIPPRINCIPALI CAMPI DI UTILIZZO:ALI CAMPI DI UTILIZZO:ALI CAMPI DI UTILIZZO:ALI CAMPI DI UTILIZZO:ALI CAMPI DI UTILIZZO:ALI CAMPI DI UTILIZZO:ALI CAMPI DI UTILIZZO:PRINCIPALI CAMPI DI UTILIZZO:PRINCIP• • Applicazioni che sfruttanApplicazioni che sfruttanApplicazioni che sfruttanApplicazioni che sfruttanApplicazioni che sfruttanoo

la capillaritàla capillarità• • Costruzioni in vetro aperte/chiusCostruzioni in vetro aperte/chiusee

• • ELEVELEVATAATAELEVATAELEVELEVATAELEV RESISTENZA RESISTENZAALL’UMIDITÀ

100 gr973

Colore: TRASPARENTE TRASPARENTE TRASP | Viscosità: ALTAALTAAL

PRINCIPPRINCIPALI MAALI MAALI MAALI MAPRINCIPALI MAPRINCIPPRINCIPALI MAPRINCIP TERIALITERIALIALI MATERIALIALI MAALI MATERIALIALI MADA INCOLLARE - VETRO CON:DA INCOLLARE - VETRO CON:DA INCOLLARE - VETRO CON:DA INCOLLARE - VETRO CON:

• VetrVetrV o •• Metallo - AlluminioMetallo - AlluminioMetallo - Alluminio•• Materiali porosMateriali porosMateriali porosMateriali porosii

LUCE VISIBILE LUCE VISIBILE LUCE VISIBILE LUCE VISIBILE

PRINCIPPRINCIPPRINCIPALI CAMPI DI UTILIZZO:ALI CAMPI DI UTILIZZO:ALI CAMPI DI UTILIZZO:ALI CAMPI DI UTILIZZO:ALI CAMPI DI UTILIZZO:ALI CAMPI DI UTILIZZO:PRINCIPALI CAMPI DI UTILIZZO:PRINCIP•• Soluzioni sottoposte a colpi, vibrazioniSoluzioni sottoposte a colpi, vibrazioniSoluzioni sottoposte a colpi, vibrazioni

• Soluzioni situate in ambienticon elevata umiditàcon elevata umidità

• Costruzioni in vetro chiuse

100 gr629

Colore: TRASPARENTE | Viscosità: ALTAALTAAL

PRINCIPPRINCIPALI MAALI MAALI MAALI MAPRINCIPALI MAPRINCIPPRINCIPALI MAPRINCIP TERIALITERIALIALI MATERIALIALI MAALI MATERIALIALI MADA INCOLLARE - VETRO CON:DA INCOLLARE - VETRO CON:DA INCOLLARE - VETRO CON:DA INCOLLARE - VETRO CON:

• VetretrVetrV oo • V Vetretr Vetr V Vetr V o temprato temprato temprato• Metallo - Alluminio Metallo - Alluminio Metallo - Alluminio Metallo - Alluminio Metallo - Alluminio

PRINCIPPRINCIPPRINCIPALI CAMPI DI UTILIZZO:ALI CAMPI DI UTILIZZO:ALI CAMPI DI UTILIZZO:ALI CAMPI DI UTILIZZO:ALI CAMPI DI UTILIZZO:ALI CAMPI DI UTILIZZO:ALI CAMPI DI UTILIZZO:PRINCIPALI CAMPI DI UTILIZZO:PRINCIP• Soluzioni situate in ambientiSoluzioni situate in ambientiSoluzioni situate in ambientiSoluzioni situate in ambientiSoluzioni situate in ambienti

con elevata umiditàcon elevata umidità• Costruzioni in vetro chiuse

81,26

161,38

601,03

81,26

161,38

601,03

81,26

161,38

601,03

81,26

161,38

601,03

81,26

161,38

601,03

81,26

161,38

601,03

81,26

161,38

601,03

51,32

5,25

5,25

5,25

5,25

5,25

26,23

38,78

9,12

44,48

9,12

SYSTEMS FOR UV BONDING

Page 217 >>> CATALOGUE REFERENCE PAGE 1079/1083 >>>

FX973GEL.30 FIXGLASS UV 973 GEL adhesive 30 gr 1 Pc

FXGEL03 Disposable plastic needles for FIX GLASS UV GEL cartridge - 5 Pc package 1 Pack

FXGEL01 Gun for FIX GLASS UV GEL cartridge 1 Pc

UV BONDING - UV ADHESIVES ACTIVATOR

FXATT Activator for FIX GLASS UV 629, 630 and FXGEL30 adhesives - 30 ml 1 Pc

UV BONDING - BICOMPONENT

FXBC50 Bi-component epoxy resin - 50 gr 1 Pc

FXBC03 Mixer for bi-component epoxy resin FXBC50 1 Pc

FXBC05 Mixer for bi-component epoxy resin FXBC50 - 5 Pc package 1 Pack

FXBC01 Gun for FXBC50 cartridge 1 Pc

UV BONDING - SURFACE PREPARATION

FX1000 Surface preparation for UV bonding - 500 ml - complete with sprayer 1 Pc

FXVP01 Professional spare sprayer 1 Pc

FX2000 Refill of surface primer for UV bonding - 2000 ml 1 Pc

FXFIRE Flaming kit (flamer + 200 ml refill) 1 Set

FXPIR200 Refill for FXFIRE - 200 ml 1 Pc

FXPIR400 Refill for FXFIRE - 400 ml 1 Pc

Art. Description Q.ty EURO38,78

9,12

171,07

30,22

29,65

1,91

9,53

72,99

23,09

3,35

43,11

162,40

18,70

29,20

SYSTEMS FOR UV BONDING

Page 218 >>> CATALOGUE REFERENCE PAGE 1084/1087 >>>

UV BONDING - HOT AIR BLOWER

FXTERM01 Makita hot air blower with option to set temperature 1 Pc

FN4 Black cloth width 4000mm Per m2

BLADES FOR PLASTIC CUTTING

LAME01 Blades for plastic cut thickness 0.20 mm x pack. 1000Pcs 1 Set

LAME03 Blades for plastic cut thickness 0.15 mm x pack. 1000Pcs 1 Set

LAME05 Blades for plastic cut thickness 0.20 mm x pack. 100Pcs 1 Set

LAME07 Blades for plastic cut thickness 0.15 mm x pack. 250pcs 1 Set

LAME02 Disposable blades for plastic cutting thickness 0.23 x 100 pc 1 Set

LAMRASCH005 Blade holder with arm 1 Pc

LAMRASCH003 Metal retractable blade holding scraper 1 Pc

UV BONDING - PERSONAL PROTECTION - PPE

LAMP014 Protection glasses for UV bonding, transparent lenses 1 Pc

LAMP016 Protection glasses for UV and visible light bonding, orange lenses 1 Pc

FXGS50 Protective gloves for UV bonding 100 Pc package - Size S 1 Pack

FXGM50 Protective gloves for UV bonding 100 Pc package - Size M 1 Pack

FXGL50 Protective gloves for UV bonding 100 Pc package - Size L 1 Pack

FXGXL50 Protective gloves for UV bonding 100 Pc package - Size XL 1 Pack

FXTNT01 TNT cloth for cleaning surfaces to be glued - 40 x 25 cm - 50 sheet package 1 Pack

Art. Description Finish Q.ty EURO

414,90

21,90

205,90

193,05

50,47

183,19

31,93

45,06

5,70

41,19

43,43

39,69

39,69

39,69

39,69

38,56

SYSTEMS FOR UV BONDING

Page 219 >>> CATALOGUE REFERENCE PAGE 1089/1095 >>>

UV BONDING - UV LAMPS

FXUVLEDLINE365 HONLE LEDLINE500 lamp, wavelength 365nm 1 Pc

FXUVLEDLINE405 HONLE LEDLINE500 lamp, wavelength 405nm - VISIBLE LIGHT 1 Pc

FXUVLED365 Lamp HONLE UV Hand LED for bonding at 365 nm 1 Pc

FXUVLED405 Lamp HONLE UV Hand LED for bonding at 405 nm - VISIBLE LIGHT 1 Pc

FXUVLED001 Container for HONLE UV Hand LED lamp 1 Pc

FXUVHAND03 Spare halides bulb for UV Hand 250 Watt lamp 1 Pc

FXUVHAND05 Spare gallium bulb laminated glass for UV Hand 250 Watt lamp 1 Pc

LAMP005 Spare 105mm 250 watt lamp, for HG200 power supply (type JE3/5) 1 Pc

LAMP005L Spare 117mm 250 watt lamp for HG200L power supply (type JE3/5L) 1 Pc

LAMP008 250 watt spare filter 1 Pc

LAMP006 Spare lamp 117mm 500 watt (type JE3/5L) 1 Pc

LAMP009 500 watt spare filter 1 Pc

UV BONDING - UV METER

FXUVHAND09 UV meter HONLE (UVA + VIS) 1 Pc

FXUVHAND11 Only meter for HONLE UV meter 1 Pc

FXUVHAND13 UVA sensor for HONLE UV meter 1 Pc

FXUVHAND15 Visible light sensor for HONLE UV meter 1 Pc

UV BONDING

FXBOXLED365 Case set with HONLE UV Hand LED lamp for 365 nm bonding with various accessories 1 Set

FXBOXLED405 Case set with HONLE UV Hand LED lamp for 405 nm bonding with various accessories 1 Set

Art. Description Finish Q.ty EURO

9.066,72

7.971,87

3.993,92

3.763,54

407,15

542,86

542,86

339,69

339,69

200,86

339,69

283,57

5.816,38

2.636,76

1.589,81

1.589,81

4.477,50

4.246,55

SYSTEMS FOR UV BONDING

Page 220 >>> CATALOGUE REFERENCE PAGE 1096/1097 >>>

SUPPORTS FOR UV BONDING

SUVREGH Suction cup with variable angle 1 Pc

SUV90I Internal support for 90° bonding 1 Pc

V90IR Internal adjustable suction cup for square bonding 1 Pc

V90I Internal suction cup for square bonding 1 Pc

V90ER External adjustable suction cup for square bonding 1 Pc

VECC Eccentric suction cup 1 Pc

Art. Description Finish Q.ty EURO

454,68

386,68

210,52

157,35

191,35

71,98

ACCESSORIES FOR GLASSWORKS

Page 221 >>> CATALOGUE REFERENCE PAGE 1100/1104 >>>

ROLLERS FOR AUTOMATIC GLASS CUTTING

TALRO3011 Hard metal rollers, dimensions Ø3 x 1 x Ø1.1, 10 pc package 1 Set

TALRO3013 Hard metal rollers, dimensions Ø3 x 1 x Ø1.3, 10 pc package 1 Set

TALRO4013 Hard metal rollers, dimensions Ø4 x 1 x Ø1.3, 10 pc package 1 Set

TALRO4114 Hard metal rollers, dimensions Ø4.1 x 1.08 x Ø1.4, 10 pc package 1 Set

TALRO4514 Hard metal rollers, dimensions Ø4.5 x 1 x Ø1.4, 10 pc package 1 Set

TALRO5013 Hard metal rollers, dimensions Ø5 x 1 x Ø1.3, 10 pc package 1 Set

TALRO5015 Hard metal rollers, dimensions Ø5 x 1.08 x Ø1.5, 10 pc package 1 Set

TALRO5614 Hard metal rollers, dimensions Ø5.6 x 1.08 x Ø1.4, 10 pc package 1 Set

TALRO5815 Hard metal rollers, dimensions Ø5.8 x 1.06 x Ø1.4, 10 pc package 1 Set

TALRO6015 Hard metal rollers, dimensions Ø6 x 1.10 x Ø1.55, 10 pc package 1 Set

TALRO6016 Hard metal rollers, dimensions Ø6.22 x 3.05 x Ø1.6, 10 pc package 1 Set

TALRO12030 Hard metal rollers, dimensions Ø12 x 3 x Ø3, 10 pc package 1 Set

TALCP4 Roller fitting CP 4, 10 pc package. 1 Set

TAL1404MD Widia axles Ø1.4 x 4.6 for CP4 support, 10 pc package 1 Set

TAL13046 Tempered steel axles Ø1.3 x 4.6 for CP3 support, 10 pc package 1 Set

TAL14060 Tempered steel axles Ø1.4 x 6 for CRD support, 10 pc package 1 Set

TAL15078 Tempered steel axles Ø1.5 x 7.8 for C support, 10 pc package 1 Set

TAL15098 Tempered steel axles Ø1.5 x 9.8 for CSA-CSD support, 10 pc package 1 Set

TAL15120 Tempered steel axles Ø1.5 x 11.8 for CSM-CSDA support, 10 pc package 1 Set

TALC Roller fitting C with Ø6 mm roller, 10 pc package 1 Set

TALCSM Roller fitting CSM with Ø5.6 mm roller, 10 pc package 1 Set

TALCSDA Roller fitting CSDA with Ø5 mm roller, 10 pc package 1 Set

TALCSA CSA 2008 mm Ø5/6 mm clip, 10 pc package 1 Set

TALCRD Roller fitting CRD with Ø4.5 mm roller, 10 pc package 1 Set

TALCSROVI Roller CSROVI, 10 pc package 1 Set

TALCROVI Roller CROVI, 10 pc package 1 Set

GLASS CUTTERS

MITSUBOR-38 Mitsuboshi oil glass cutter for 3-8 mm straight cut 1 Pc

TAG004 Tojo glass cutter with metal handle 1 Pc

TAG003 Tojo glass cutter with plastic handle 1 Pc

TAG013 Glass cutter with wooden handle, with one hard metal roller 1 Pc

TAG007 Tojo glass cutter spare part 1 Pc

TAG016 Spare part for glass cutter with one hard metal roller 1 Pc

Art. Description Q.ty EURO

179,62

179,62

166,85

167,65

179,62

167,65

167,65

167,65

167,65

179,62

259,46

245,49

279,41

45,90

27,94

31,93

31,93

31,93

39,92

199,58

199,58

199,58

191,60

259,46

279,41

279,41

56,34

58,85

57,48

25,95

45,16

18,36

CPH10 Hammer glass with wooden handle, brass ball head, Ø 20 mm 1 Pc

CPH20 Hammer glass with aluminium handle, brass oval spheres, Ø 20 mm and 14 mm 1 Pc

OIL31321 Lubricating oil for glass cutters 1 L

CUTTING OIL

OIL31301 Cutting oil for benches 3130 1 L 1 Pc

OIL31305 Cutting oil for benches 3130 5 L 1 Pc

OIL313025 Cutting oil for benches 3130 25 L 1 Pc

OIL31331 Cutting oil for benches 3133 1 L 1 Pc

OIL31335 Cutting oil for benches 3133 5 L 1 Pc

OIL313325 Cutting oil for benches 3133 25 L 1 Pc

OIL31321 Cutting oil for benches 3132 1 L 1 Pc

OIL31325 Cutting oil for benches 3132 5 L 1 Pc

OIL313225 Cutting oil for benches 3132 25 L 1 Pc

GLASS CUTTERS AND CIRCLE CUTTERS

TAG600 Tank glass cutter for cutting in series 600 mm 1 Pc

TAG900 Tank glass cutter for cutting in series 900 mm 1 Pc

TAG1200 Tank glass cutter for cutting in series 1200 mm 1 Pc

TAG1500 Tank glass cutter for cutting in series 1500 mm 1 Pc

TAG1800 Tank glass cutter for cutting in series 1800 mm 1 Pc

TAG2100 Tank glass cutter for cutting in series 2100 mm 1 Pc

TAG-TK Container for oil and roller fitting 1 Pc

TAG-PT Sliding block 1 Pc

TAG-S1519 Roller S cut 15-19 mm 1 Pc

TAG-T612 Roller T cut 6-12 mm 1 Pc

TAG-H28 Roller H cut 2-8 mm 1 Pc

TANK CIRCLE CUTTER

CTV600 Tank circle cutter 600 mm 1 Pc

CTV800 Tank circle cutter 800 mm 1 Pc

CTV1000 Tank circle cutter 1000 mm 1 Pc

CTV1200 Tank circle cutter 1200 mm 1 Pc

CTV01 Container for oil and roller fitting 1 Pc

CTV10 Suction cup 1 Pc

TCC-H28 Roller H cut 2-8 mm 1 Pc

TCC-T612 Roller T cut 6-12 mm 1 Pc

TCC-S1519 Roller S cut 15-19 mm 1 Pc

ACCESSORIES FOR GLASSWORKS

Page 222

Art. Description Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 1104/1106 >>>

51,00

48,47

33,13

27,38

122,54

540,87

30,18

137,11

577,19

33,13

151,68

649,24

339,72

339,72

339,72

339,72

362,37

362,37

54,73

6,04

33,97

33,97

33,97

140,42

148,72

152,50

165,33

86,82

36,99

33,97

33,97

33,97

ACCESSORIES FOR GLASSWORKS

Page 223 >>> CATALOGUE REFERENCE PAGE 1107/1109 >>>

CIRCLE CUTTER

CP400 Circle cutter with max cutting Ø 400mm 1 Pc

CP600 Circle cutter with max cutting Ø 600 mm 1 Pc

CP1000 Circle cutter with max cutting Ø 1000 mm 1 Pc

CP1200 Circle cutter with max cutting Ø 1200 mm 1 Pc

CP1600 Circle cutter with max cutting Ø 1600 1 Pc

CP2000 Circle cutter with max cutting Ø 2000 mm 1 Pc

CPLEV Spare lever for CP suction cups 1 Pc

CPVEN Spare suction cup Ø 60 mm for CP suction cups 1 Pc

CPOM Knob with spare glass cutter 1 Pc

BLADES FOR PLASTIC CUTTING

LAME01 Blades for plastic cutting 0.20 mm thickness x 1000 pc package 1 Set

LAME03 Blades for plastic cutting 0.15 mm thickness x 1000 pc package 1 Set

LAME05 Blades for plastic cutting 0.20 mm thickness x 100 pc package 1 Set

LAME07 Blades for plastic cutting 0.15 mm thickness x 250 pc package 1 Set

LAME02 Disposable blades for plastic cutting thickness 0.23 x 100 pc 1 Set

LAMRASCH005 Blade holder with arm 1 Pc

LAMRASCH001 Blade holding scraper 1 Pc

LAMRASCH003 Metal retractable blade holding scraper 1 Pc

CUT005 Red self-retractable cutter 1 Pc

LAME09 Spare blade 100 pc package for cutter CUT005 1 Set

CUT007 Black/grey self-retractable cutter with rubber grip 1 Pc

LAME11 Spare blade 100 pc package for cutter CUT007 1 Set

Art. Description Q.ty EURO

151,56

157,35

176,16

181,22

200,03

218,84

6,51

27,49

51,73

205,90

193,05

50,47

183,19

31,93

45,06

14,83

5,70

4,85

74,99

15,97

19,96

SQUARES AND RULERS

SQHB600 Square with arm and measurements on the edge, length 600 mm 1 Pc

SQHB800 Square with arm and measurements on the edge, length 800 mm 1 Pc

SQHB1050 Square with arm and measurements on the edge, length 1050 mm 1 Pc

SQHB1250 Square with arm and suction cup, length 1250 mm 1 Pc

SQHB1500 Square with arm and suction cup, length 1500 mm 1 Pc

SQHB1750 Square with arm and suction cup, length 1750 mm 1 Pc

SQHB2100 Square with arm and suction cup, length 2100 mm 1 Pc

SQHD400 Square with diagonal and measurements on the edge, length 400 mm 1 Pc

SQHD600 Square with diagonal and measurements on the edge, length 600 mm 1 Pc

SQHD800 Square with diagonal and measurements on the edge, length 800 mm 1 Pc

SQHD1050 Square with diagonal and measurements on the edge, length 1050 mm 1 Pc

SQHD1250 Square with diagonal and suction cup, length 1250 mm 1 Pc

SQHD1500 Square with diagonal and suction cup, length 1500 mm 1 Pc

SQHD1750 Square with diagonal and suction cup, length 1750 mm 1 Pc

SQ002 Square with hypotenuse 500 mm 1 Pc

SQ003 Square with hypotenuse 700 mm 1 Pc

SQ004 Square with hypotenuse 900 mm 1 Pc

SQ005 Square with hypotenuse 1100 mm 1 Pc

SQ006 Square with hypotenuse 1250 mm 1 Pc

SQ007 Square with hypotenuse 1500 mm 1 Pc

RIGA001 Ruler 2500 mm 1 Pc

SQTV2000 Cutting bar with 3 suction cups, length 2000 mm 1 Pc

SQTV2500 Cutting bar with 4 suction cups, length 2500 mm 1 Pc

SQTV3000 Cutting bar with 5 suction cups, length 3000 mm 1 Pc

SQTV3500 Cutting bar with 5 suction cups, length 3500 mm 1 Pc

SQTVVS400 Spare suction cup for cutting bars 1 Pc

SQTECC Eccentric suction cup for cutting bars and squares 1 Pc

SQTSUP Suction cup support for cutting bars and squares 1 Pc

ACCESSORIES FOR GLASSWORKS

Page 224

Art. Description Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 1110/1113 >>>

108,15

153,73

215,59

275,27

332,06

404,04

512,20

89,92

99,47

135,28

224,99

271,65

343,63

417,42

45,62

54,83

55,70

73,04

84,08

93,88

84,53

314,70

401,15

499,17

539,32

19,17

71,98

98,39

ACCESSORIES FOR GLASSWORKS

Page 225 >>> CATALOGUE REFERENCE PAGE 1113/1117 >>>

SQTS400 Cuts in series, 400x400 mm 1 Pc

SQTS600 Cuts in series, 600x600 mm 1 Pc

SQTS860 Cuts in series, 800x600 mm 1 Pc

PLIERS

PINZJAW Jaw thick glass breaking pliers 1 Pc

PINZ006 3-point running pliers 1 Pc

PINZ001 Running pliers with red handle 18 1 Pc

PINZ002 Running pliers with red handle 20 1 Pc

PINZ30 Running pliers with rubber handle 1 Pc

PINZ33 Adjustable running pliers with rubber handle 1 Pc

PINZ35 Pliers with tip and rubber handle 1 Pc

DISC SAWS

MAK300 MAKITA disc saw 1 Pc

MAK300BAT MAKITA 2Ah battery for art. MAK300 1 Pc

MAK300BAT4 MAKITA 4Ah battery for art. MAK300 1 Pc

MAK300CAR MAKITA battery charger for art. MAK300 1 Pc

MAK10 MAKITA 110 sector diamond disk 1 Pc

UDFMARK80 Diamond disk for MAKITA DUEZETA 1 Pc

MAK80 Diamond disk for MAKITA 80 1 Pc

Art. Description Q.ty EURO136,01

177,60

204,01

330,65

42,28

44,75

42,15

21,89

21,89

37,75

624,29

135,72

206,40

135,72

189,85

172,44

106,63

CORE DRILLS AND GRINDING HEADS

UDF-7283ME03 Core drill length 75 mm - Ø 3 mm normal - st 1 Pc

UDF-7283ME04 Core drill length 75 mm - Ø 4 mm normal - st 1 Pc

UDF-7283ME05 Core drill length 75 mm - Ø 5 mm normal - st 1 Pc

UDF-7283ME06 Core drill length 75 mm - Ø 6 mm normal - st 1 Pc

UDF-7283ME07 Core drill length 75 mm - Ø 7 mm normal - st 1 Pc

UDF-7283ME08 Core drill length 75 mm - Ø 8 mm normal - st 1 Pc

UDF-7283ME09 Core drill length 75 mm - Ø 9 mm normal - st 1 Pc

UDF-7283ME10 Core drill length 75 mm - Ø 10 mm normal - st 1 Pc

UDF-7283ME11 Core drill length 75 mm - Ø 11 mm normal - st 1 Pc

UDF-7283ME12 Core drill length 75 mm - Ø 12 mm normal - st 1 Pc

UDF-7283ME13 Core drill length 75 mm - Ø 13 mm normal - st 1 Pc

UDF-7283ME14 Core drill length 75 mm - Ø 14 mm normal - st 1 Pc

UDF-7283ME15 Core drill length 75 mm - Ø 15 mm normal - st 1 Pc

UDF-7283ME16 Core drill length 75 mm - Ø 16 mm normal - st 1 Pc

UDF-7283ME17 Core drill length 75 mm - Ø 17 mm normal - st 1 Pc

UDF-7283ME18 Core drill length 75 mm - Ø 18 mm normal - st 1 Pc

UDF-7283ME19 Core drill length 75 mm - Ø 19 mm normal - st 1 Pc

UDF-7283ME20 Core drill length 75 mm - Ø 20 mm normal - st 1 Pc

UDF-7283ME21 Core drill length 75 mm - Ø 21 mm normal - st 1 Pc

UDF-7283ME22 Core drill length 75 mm - Ø 22 mm normal - st 1 Pc

UDF-7283ME23 Core drill length 75 mm - Ø 23 mm normal - st 1 Pc

UDF-7283ME24 Core drill length 75 mm - Ø 24 mm normal - st 1 Pc

UDF-7283ME25 Core drill length 75 mm - Ø 25 mm normal - st 1 Pc

UDF-7283ME26 Core drill length 75 mm - Ø 26 mm normal - st 1 Pc

UDF-7283ME27 Core drill length 75 mm - Ø 27 mm normal - st 1 Pc

UDF-7283ME28 Core drill length 75 mm - Ø 28 mm normal - st 1 Pc

UDF-7283ME29 Core drill length 75 mm - Ø 29 mm normal - st 1 Pc

UDF-7283ME30 Core drill length 75 mm - Ø 30 mm normal - st 1 Pc

UDF-7283ME31 Core drill length 75 mm - Ø 31 mm normal - st 1 Pc

UDF-7283ME32 Core drill length 75 mm - Ø 32 mm normal - st 1 Pc

UDF-7283ME33 Core drill length 75 mm - Ø 33 mm normal - st 1 Pc

UDF-7283ME34 Core drill length 75 mm - Ø 34 mm normal - st 1 Pc

UDF-7283ME35 Core drill length 75 mm - Ø 35 mm normal - st 1 Pc

UDF-7283ME36 Core drill length 75 mm - Ø 36 mm normal - st 1 Pc

UDF-7283ME37 Core drill length 75 mm - Ø 37 mm normal - st 1 Pc

UDF-7283ME38 Core drill length 75 mm - Ø 38 mm normal - st 1 Pc

UDF-7283ME39 Core drill length 75 mm - Ø 39 mm normal - st 1 Pc

UDF-7283ME40 Core drill length 75 mm - Ø 40 mm normal - st 1 Pc

UDF-7283ME41 Core drill length 75 mm - Ø 41 mm normal - st 1 Pc

UDF-7283ME42 Core drill length 75 mm - Ø 42 mm normal - st 1 Pc

UDF-7283ME43 Core drill length 75 mm - Ø 43 mm normal - st 1 Pc

UDF-7283ME44 Core drill length 75 mm - Ø 44 mm normal - st 1 Pc

UDF-7283ME45 Core drill length 75 mm - Ø 45 mm normal - st 1 Pc

UDF-7283ME46 Core drill length 75 mm - Ø 46 mm normal - st 1 Pc

UDF-7283ME47 Core drill length 75 mm - Ø 47 mm normal - st 1 Pc

ACCESSORIES FOR GLASSWORKS

Page 226

Art. Description Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 1118 >>>

95,53

69,25

48,72

48,72

52,83

52,83

58,03

58,03

60,22

60,22

63,50

63,50

67,61

67,61

71,71

71,71

76,64

76,64

79,92

79,92

82,66

82,66

88,41

88,41

94,98

94,98

102,09

102,09

109,48

109,48

115,51

115,51

123,17

123,17

129,74

129,74

139,87

139,87

144,52

144,52

146,44

146,44

147,53

147,53

151,36

ACCESSORIES FOR GLASSWORKS

Page 227 >>> CATALOGUE REFERENCE PAGE 1118/1119 >>>

UDF-7283ME48 Core drill length 75 mm - Ø 48 mm normal - st 1 Pc

UDF-7283ME49 Core drill length 75 mm - Ø 49 mm normal - st 1 Pc

UDF-7283ME50 Core drill length 75 mm - Ø 50 mm normal - st 1 Pc

UDF-7283ME55 Core drill length 75 mm - Ø 55 mm normal - st 1 Pc

UDF-7283ME60 Core drill length 75 mm - Ø 60 mm normal - st 1 Pc

UDF-7283ME65 Core drill length 75 mm - Ø 65 mm normal - st 1 Pc

UDF-7283ME70 Core drill length 75 mm - Ø 70 mm normal - st 1 Pc

UDF-7283ME75 Core drill length 75 mm - Ø 75 mm normal - st 1 Pc

UDF-7283ME80 Core drill length 75 mm - Ø 80 mm normal - st 1 Pc

UDF-7283ME85 Core drill length 75 mm - Ø 85 mm normal - st 1 Pc

UDF-7283ME90 Core drill length 75 mm - Ø 90 mm normal - st 1 Pc

UDF7283ME100 Core drill length 75 mm - Ø 100 mm normal - st 1 Pc

UDF-FH FH core drills with greater sharpness than standard 1 Pc

UDSV05 Grinding heads length 75 mm diamond 0 to 35 mm 1 Pc

UDSV06 Grinding heads length 75 mm diamond 0 to 45 mm 1 Pc

UDSV07 Grinding heads length 75 mm diamond 0 to 65 mm 1 Pc

UDFORSV Ø 4 to 70 for the core drill and 14 to 80 for the grinding head 1 Pc

UDFORSV1 Ø core drill between 4 and 70 1 Pc

UDFORSV2 Ø grinding head between 14 and 80 depending on hole 1 Pc

FOREX

UDFX012 Extendible Forex core drill 70/100 4 sectors type 00 1 Pc

UDFX013 Extendible Forex core drill 90/140 4 sectors type 01 1 Pc

UDFX014 Extendible Forex core drill 130/180 6 sectors type 02 1 Pc

UDFX015 Extendible Forex core drill 180/240 6 sectors type 03 1 Pc

ACCESSORIES

UDFX017 Compass 70/100 1 Pc

UDFX018 Compass 90/240 1 Pc

UDFX020 Spare sectors 00 1 Pc

UDFX021 Spare sectors 01 1 Pc

UDFX022 Spare sectors 02 1 Pc

UDFX023 Spare sectors 03 1 Pc

UDFS1 Centring tool 1 Pc

UDFS2 Hexagonal key for centring tool 1 Pc

UDFS4 Core drill adaptor R 1/4” to R 1/2” 1 Pc

UDFS6 Core drill adaptor R 1/2” to R 1/4” 1 Pc

UDFS8 Core drill adaptor from point core Ø 12 mm 1 Pc

UDFS10 Core drill extension 1 Pc

Art. Description Q.ty EURO151,36

156,56

156,56

178,19

196,80

218,97

228,00

248,26

260,57

275,08

291,78

319,97

OFFER ON REQUEST

317,51

413,31

539,21

OFFER ON REQUEST

OFFER ON REQUEST

OFFER ON REQUEST

555,91

651,71

833,18

946,50

131,38

185,85

39,69

39,69

39,69

39,69

179,59

24,59

61,75

61,75

61,75

61,75

NSGST01 Core drill and cup grinding touch-up files 25x50x200 mm - Grain 80 Orange 1 Pc

NSGST03 Core drill and cup grinding touch-up files 25x50x200 mm - Grain 120 Blue 1 Pc

NSGST05 Core drill and cup grinding touch-up files 25x50x200 mm - Grain 180 White 1 Pc

NSGST07 Core drill and cup grinding touch-up files 10x155x285 mm - Grain 120 Brown 1 Pc

NSGST09 Core drill and cup grinding touch-up files 20x20x200 mm - Grain 220 White 1 Pc

UDFS12 Sealing ring for coolant, inner Ø 32 mm, outer 64 mm 1 Pc

UDFS14 Sealing ring for coolant, inner Ø 68 mm, outer 106 mm 1 Pc

UDFS16 Sealing ring for coolant, inner Ø 150 mm, outer 194 mm 1 Pc

MARKING TOOLS

PUN20 Hard metal glass marking tip 1 Pc

PUN30 Diamond glass marking tip 1 Pc

PUN001 Tracing tip with clip 1 Pc

PUN002 Spare tip 1 Pc

DIAMOND TAPES

MP4000 Air sanding machine MP4000 1 Pc

MPCMO Mini oiler 1 Pc

MPCP Spray-guard cap 1 Pc

MP100 ABS support for MP4000 disks 1 Pc

DGS002 ABS disk support 1 Pc

DGS003 Expansion wheel for tape 75x38 1 Pc

DGS035 Expansion wheel for tape 50x42 1 Pc

DGS005V Diamond disk Ø 100 for very strong removal Green 1 Pc

DGS005N Diamond disk Ø 100 for strong removal Black 1 Pc

DGS005R Diamond disk Ø 100 for medium removal Red 1 Pc

DGS005G Diamond disk Ø 100 for finishing Yellow 1 Pc

DGS005B Diamond disk Ø 100 for excellent finishing White 1 Pc

DGS006RBG Resin disk Ø 100 for polishing White/yellow 1 Pc

DGS006RBLU Resin disk Ø 100 for lapping Blue 1 Pc

DGS007V Diamond belt 75x38 for very strong removal Green 1 Pc

DGS007N Diamond belt 75x38 for strong removal Black 1 Pc

DGS007R Diamond belt 75x38 for medium removal Red 1 Pc

DGS007G Diamond belt 75x38 for finishing Yellow 1 Pc

DGS007B Diamond belt 75x38 for excellent finishing White 1 Pc

DGS008RBG Resin belt 75x38 for polishing White/yellow 1 Pc

DGS008RBLU Resin belt 75x38 for lapping Blue 1 Pc

DGS011V Diamond belt 50x42 for very strong removal Green 1 Pc

DGS011N Diamond belt 50x42 for strong removal Black 1 Pc

DGS011R Diamond belt 50x42 for medium removal Red 1 Pc

ACCESSORIES FOR GLASSWORKS

Page 228

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 1120/1122 >>>

13,42

14,60

14,21

131,38

7,62

36,17

44,13

84,28

22,43

49,19

20,38

9,24

765,25

32,62

67,22

38,14

17,56

173,12

122,94

89,60

73,54

56,70

53,19

53,19

32,89

32,89

94,84

84,30

68,25

46,17

46,17

44,43

44,43

87,82

74,54

56,70

ACCESSORIES FOR GLASSWORKS

Page 229 >>> CATALOGUE REFERENCE PAGE 1122/1128 >>>

DGS011G Diamond belt 50x42 for finishing Yellow 1 Pc

DGS011B Diamond belt 50x42 for excellent finishing White 1 Pc

DGS012RBG Resin belt 50x42 for polishing White/yellow 1 Pc

DGS012RBLU Resin belt 50x42 for lapping Blue 1 Pc

NORTON SAINT-GOBAIN HAND BUFFERS

NSG01V Hand buffers for very strong removal Green 1 Pc

NSG03N Hand buffers for strong removal Black 1 Pc

NSG05R Hand buffers for medium removal Red 1 Pc

NSG07G Hand buffers for finishing Yellow 1 Pc

NSG09B Hand buffers for excellent finishing White 1 Pc

NSG11BLU Hand buffers for lapping Blue 1 Pc

SANDING MACHINES

MAK9032 MAKITA 533x9 belt sanding machine 1 Pc

MAK9031 MAKITA 533x30 belt sanding machine 1 Pc

NORTON SAINT-GOBAIN DIAMOND BELTS

NDSG03 Diamond belt 533 x 9 mm grain 120 1 Pc

NDSG05 Diamond belt 533 x 9 mm grain 200 1 Pc

NDSG07 Diamond belt 533 x 9 mm grain 400 1 Pc

NDSG13 Diamond belt 533 x 30 mm grain 60 1 Pc

NDSG15 Diamond belt 533 x 30 mm grain 120 1 Pc

NDSG17 Diamond belt 533 x 30 mm grain 200 1 Pc

NDSG19 Diamond belt 533 x 30 mm grain 400 1 Pc

NORTON SAINT-GOBAIN SILICON CARBIDE TAPE

NSSG01 Silicon carbide tape 533 x 9 mm grain 40 1 Pc

NSSG03 Silicon carbide tape 533 x 9 mm grain 80 1 Pc

NSSG05 Silicon carbide tape 533 x 30 mm grain 40 1 Pc

NSSG07 Silicon carbide tape 533 x 30 mm grain 80 1 Pc

NSSG09 Silicon carbide tape 830 x 70 mm grain 40 1 Pc

NSSG11 Silicon carbide tape 830 x 70 mm grain 80 1 Pc

NSSG13 Silicon carbide tape 830 x 70 mm grain 120 1 Pc

NSSG15 Silicon carbide tape 830 x 70 mm grain 150 1 Pc

NSSG17 Silicon carbide tape 830 x 70 mm grain 220 1 Pc

NSSG19 Silicon carbide tape 830 x 70 mm grain 320 1 Pc

Art. Description Finish Q.ty EURO51,46

51,46

42,65

42,65

47,87

41,00

34,18

30,78

29,26

29,26

682,46

833,68

136,86

127,73

114,05

228,09

205,28

182,47

159,67

1,46

1,37

2,60

2,28

7,67

6,50

6,20

6,20

6,20

6,20

NSSG21 Silicon carbide tape 1100 x 100 mm grain 36 1 Pc

NSSG23 Silicon carbide tape 1100 x 100 mm grain 40 1 Pc

NSSG25 Silicon carbide tape 1100 x 100 mm grain 80 1 Pc

NSSG27 Silicon carbide tape 1100 x 100 mm grain 120 1 Pc

NSSG29 Silicon carbide tape 1100 x 100 mm grain 150 1 Pc

NSSG31 Silicon carbide tape 1100 x 100 mm grain 220 1 Pc

NSSG33 Silicon carbide tape 1100 x 100 mm grain 320 1 Pc

NSSG35 Silicon carbide tape 2400 x 100 mm grain 40 1 Pc

NSSG37 Silicon carbide tape 2400 x 100 mm grain 80 1 Pc

NSSG39 Silicon carbide tape 2400 x 100 mm grain 120 1 Pc

NSSG41 Silicon carbide tape 2400 x 100 mm grain 150 1 Pc

NSSG43 Silicon carbide tape 2400 x 100 mm grain 220 1 Pc

NSSG45 Silicon carbide tape 2400 x 100 mm grain 320 1 Pc

NSSG47 Silicon carbide tape 3350 x 100 mm grain 40 1 Pc

NSSG49 Silicon carbide tape 3350 x 100 mm grain 80 1 Pc

NSSG51 Silicon carbide tape 3350 x 100 mm grain 120 1 Pc

NSSG53 Silicon carbide tape 3350 x 100 mm grain 150 1 Pc

NSSG55 Silicon carbide tape 3350 x 100 mm grain 220 1 Pc

NSSG57 Silicon carbide tape 3350 x 100 mm grain 320 1 Pc

NORTON SAINT-GOBAIN CORUNDUM TAPE

NCSG01 Corundum tape 533 x 9 mm grain 150 1 Pc

NCSG03 Corundum tape 533 x 9 mm grain 220 1 Pc

NCSG05 Corundum tape 533 x 9 mm grain 320 1 Pc

NCSG07 Corundum tape 533 x 9 mm grain 400 1 Pc

NCSG09 Corundum tape 533 x 30 mm grain 150 1 Pc

NCSG11 Corundum tape 533 x 30 mm grain 220 1 Pc

NCSG13 Corundum tape 533 x 30 mm grain 320 1 Pc

NCSG15 Corundum tape 533 x 30 mm grain 400 1 Pc

NCSG17 Corundum tape 830 x 70 mm grain 150 1 Pc

NCSG19 Corundum tape 830 x 70 mm grain 220 1 Pc

NCSG21 Corundum tape 830 x 70 mm grain 320 1 Pc

NCSG23 Corundum tape 830 x 70 mm grain 400 1 Pc

NCSG25 Corundum tape 1100 x 100 mm grain 150 1 Pc

NCSG27 Corundum tape 1100 x 100 mm grain 220 1 Pc

NCSG29 Corundum tape 1100 x 100 mm grain 320 1 Pc

NCSG31 Corundum tape 1100 x 100 mm grain 400 1 Pc

NORTON SAINT-GOBAIN CORK TAPE

NSU006 Cork tape 533 x 9 mm 1 Pc

NSU007 Cork tape 533 x 30 mm 1 Pc

NSU001 Cork tape 830 x 70 mm 1 Pc

NSU002 Cork tape 1100 x 100 mm 1 Pc

NSU004 Cork tape 2400 x 100 mm 1 Pc

NSU005 Cork tape 3350 x 100 mm 1 Pc

ACCESSORIES FOR GLASSWORKS

Page 230

Art. Description Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 1128/1130 >>>

13,87

13,05

10,99

10,92

10,92

10,92

10,92

25,46

20,90

20,89

20,89

20,89

20,89

34,61

28,21

28,17

28,17

28,17

28,17

1,28

1,28

1,28

1,28

2,05

2,05

2,05

2,05

5,84

5,84

5,84

5,84

10,26

10,26

10,26

10,26

5,65

6,61

16,97

27,74

57,16

78,69

ACCESSORIES FOR GLASSWORKS

Page 231 >>> CATALOGUE REFERENCE PAGE 1131 >>>

CH TAPE

NCH00 Silicon carbide tape 533 x 9 mm CH tape, grain 40 1 Pc

NCH01 Silicon carbide tape 533 x 9 mm CH tape, grain 80 1 Pc

NCH03 Silicon carbide tape 533 x 30 mm CH tape, grain 40 1 Pc

NCH05 Silicon carbide tape 533 x 30 mm CH tape, grain 80 1 Pc

NCH062 Silicon carbide tape 610 x 100 mm CH tape, grain 80 1 Pc

NCH07 Silicon carbide tape 830 x 70 mm CH tape, grain 40 1 Pc

NCH09 Silicon carbide tape 830 x 70 mm CH tape, grain 80 1 Pc

NCH10 Silicon carbide tape 1100 x 100 mm CH tape, grain 36 1 Pc

NCH12 Silicon carbide tape 1100 x 100 mm CH tape, grain 40 1 Pc

NCH14 Silicon carbide tape 1100 x 100 mm CH tape, grain 80 1 Pc

NCH16 Silicon carbide tape 1620 x 100 mm CH tape, grain 40 1 Pc

NCH17 Silicon carbide tape 1620 x 100 mm CH tape, grain 80 1 Pc

NCH19 Silicon carbide tape 2400 x 100 mm CH tape, grain 40 1 Pc

NCH21 Silicon carbide tape 2400 x 100 mm CH tape, grain 80 1 Pc

NCH23 Silicon carbide tape 3350 x 100 mm CH tape, grain 40 1 Pc

NCH25 Silicon carbide tape 3350 x 100 mm CH tape, grain 80 1 Pc

CW TAPE

NCW26 Silicon carbide tape 830 x 70 mm CW tape, grain 120 1 Pc

NCW27 Silicon carbide tape 830 x 70 mm CW tape, grain 150 1 Pc

NCW28 Silicon carbide tape 830 x 70 mm CW tape, grain 220 1 Pc

NCW29 Silicon carbide tape 830 x 70 mm CW tape, grain 320 1 Pc

NCW34 Silicon carbide tape 1100 x 100 mm CW tape, grain 120 1 Pc

NCW39 Silicon carbide tape 1100 x 100 mm CW tape, grain 150 1 Pc

NCW41 Silicon carbide tape 1100 x 100 mm CW tape, grain 220 1 Pc

NCW43 Silicon carbide tape 1100 x 100 mm CW tape, grain 320 1 Pc

NCW44 Silicon carbide tape 1620 x 100 mm CW tape, grain 150 1 Pc

NCW49 Silicon carbide tape 2400 x 100 mm CW tape, grain 120 1 Pc

NCW50 Silicon carbide tape 2400 x 100 mm CW tape, grain 150 1 Pc

NCW51 Silicon carbide tape 2400 x 100 mm CW tape, grain 220 1 Pc

NCW52 Silicon carbide tape 2400 x 100 mm CW tape, grain 320 1 Pc

NCW53 Silicon carbide tape 3350 x 100 mm CW tape, grain 120 1 Pc

NCW54 Silicon carbide tape 3350 x 100 mm CW tape, grain 150 1 Pc

NCW55 Silicon carbide tape 3350 x 100 mm CW tape, grain 220 1 Pc

NCW56 Silicon carbide tape 3350 x 100 mm CW tape, grain 320 1 Pc

2AF CORUNDUM TAPE

N2AF57 Corundum tape 533 x 9 mm 2AF tape, grain 150 1 Pc

N2AF59 Corundum tape 533 x 9 mm 2AF tape, grain 220 1 Pc

N2AF60 Corundum tape 533 x 9 mm 2AF tape, grain 320 1 Pc

N2AF64 Corundum tape 533 x 30 mm 2AF tape, grain 150 1 Pc

N2AF65 Corundum tape 533 x 30 mm 2AF tape, grain 220 1 Pc

N2AF67 Corundum tape 533 x 30 mm 2AF tape, grain 320 1 Pc

N2AF69 Corundum tape 533 x 30 mm 2AF tape, grain 400 1 Pc

N2AF691 Corundum tape 610 x 100 mm 2AF tape, grain 150 1 Pc

N2AF692 Corundum tape 610 x 100 mm 2AF tape, grain 220 1 Pc

N2AF693 Corundum tape 610 x 100 mm 2AF tape, grain 320 1 Pc

Art. Description Q.ty EURO

1,61

1,51

2,81

2,49

8,33

8,46

7,31

15,27

14,48

12,27

19,69

16,45

27,52

22,71

37,03

30,31

7,15

7,15

7,15

7,46

11,99

11,99

11,99

12,62

16,03

22,08

22,08

22,08

23,42

29,44

29,44

29,44

31,33

1,43

1,43

1,43

2,25

2,25

2,25

2,25

7,46

7,46

7,46

N2AF694 Corundum tape 610 x 100 mm 2AF tape, grain 400 1 Pc

N2AF70 Corundum tape 830 x 70 mm 2AF tape, grain 150 1 Pc

N2AF71 Corundum tape 830 x 70 mm 2AF tape, grain 220 1 Pc

N2AF72 Corundum tape 830 x 70 mm 2AF tape, grain 320 1 Pc

N2AF73 Corundum tape 830 x 70 mm 2AF tape, grain 400 1 Pc

N2AF74 Corundum tape 1100 x 100 mm 2AF tape, grain 150 1 Pc

N2AF75 Corundum tape 1100 x 100 mm 2AF tape, grain 220 1 Pc

N2AF76 Corundum tape 1100 x 100 mm 2AF tape, grain 320 1 Pc

N2AF77 Corundum tape 1100 x 100 mm 2AF tape, grain 400 1 Pc

CERIUM OXIDE

OSS95 Cerium Oxide > 95% in 5 kg bucket 1 Pc

SANDING

SABB1 Corundum for sanding, grain 80 Per kg.

SABB2 Corundum for sanding, grain 100 Per kg.

SABB3 Corundum for sanding, grain 120 Per kg.

SABB4 Corundum for sanding, grain 150 Per kg.

SANDING - SANDBLAST

FC8061 Sandblast 80 thickness 0.08 roll 61 cm x 50 m Matt black 1 Pc

FC8061B Sandblast 80 thickness 0.08 roll 61 cm x 50 m Matt white 1 Pc

FC16061 Sandblast 160 thickness 0.16 roll 61 cm x 25 m Matt black 1 Pc

FC28061 Sandblast 280 thickness 0.28 roll 61 cm x 25 m Blue 1 Pc

FC300M61 Sandblast 300 soft thickness 0.30 roll 61 cm x 25 m Beige 1 Pc

FC300R61 Sandblast 300 hard thickness 0.30 roll 61 cm x 25 m Grey 1 Pc

FCAT10050 Application tape thickness 0.10 roll 50 cm x 100 m Transparent 1 Pc

FCAT15061 Application tape thickness 0.15 roll 61 cm x 100 m Transparent 1 Pc

CAR001 Masking tape medium thickness 4423 h 100 mm x 50 m 1 Pc

CAR002 Masking tape medium thickness 4423 h 150 mm x 50 m 1 Pc

CAR003 Masking tape medium thickness 4423 h 250 mm x 50 m 1 Pc

CAR004 Masking tape, very thick 4432 h 150 mm x 25 m 1 Pc

CAR005 Masking tape, very thick 4432 h 250 mm x 25 m 1 Pc

CAR021 Sanding paper MSK 1110 50 mm x 50 metres 1 Pc

CAR022 Sanding paper MSK 1110 100 mm x 50 metres 1 Pc

CAR024 Sanding paper MSK 1110 150 mm x 50 metres 1 Pc

CAR026 Sanding paper MSK 1110 200 mm x 50 metres 1 Pc

CAR028 Sanding paper MSK 1110 250 mm x 50 metres 1 Pc

CUTTER

CUT001 Cutter for graphics 1 Pc

CUT002 Spare blades 10 pc package 1 Set

CUT003 Aluminium cutter with 3 spare blades 1 Pc

CUT004 Spare blade for aluminium cutter, 3 pc package 1 Set

ACCESSORIES FOR GLASSWORKS

Page 232

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 1131/1136 >>>

7,46

6,44

6,44

6,44

6,44

10,67

10,67

10,67

10,67

281,47

3,57

3,57

3,57

3,57

238,12

238,12

199,47

332,35

332,35

249,53

154,02

209,76

54,71

82,17

140,80

162,86

302,06

12,77

25,55

38,18

51,09

63,77

16,88

5,25

17,79

6,39

ACCESSORIES FOR GLASSWORKS

Page 233 >>> CATALOGUE REFERENCE PAGE 1137/1140 >>>

PROG28 Pro.Glass® Matt 113 1 Pc

PROG30 Microfibre sponge 1 Pc

FACC001 Face masks 1 Pc

MEASURING INSTRUMENTS

NML10 MERLIN LAZER measuring device 1 Pc

NML12 MERLIN LAZER hardened glass indicator 1 Pc

NML14 MERLIN LAZER low emissivity detector 1 Pc

NML16 Display for stress and glass tempering 1 Pc

NMLKIT18 Case set with measuring device, tempered glass indicator and low emissivity detector 1 Pc

NMETS5 FAT MAX measuring tape 5 metres 1 Pc

NMETS7 POWER LOCK classic measuring tape 5 m 1 Pc

NMETS8 PANORAMIC measuring tape 3 m 1 Pc

NMET001 METRICA measuring tape 3 m 1 Pc

NMET002 METRICA measuring tape 5 m 1 Pc

Art. Description Q.ty EURO213,50

3,56

10,08

670,01

459,37

229,59

459,37

1.263,62

53,16

47,69

26,87

15,32

18,13

SUCTION CUPS

VEN0065 Suction cup SGLM120 Ø 200 with vacuum metre complete with box 120/80 kg 1 Pc

VEN0068 SGLM120 suction cup spare part 1 Pc

VEN006 Pump suction cup SGLM120 Ø 200 complete with box 120/80 kg 1 Pc

VEN0068 SGLM120 suction cup spare part 1 Pc

VEN244 Pump suction cup Ø 244 mm 170/140 kg 1 Pc

VEN204 Pump suction cup complete with rigid plastic box Ø 204 mm 110/40 kg 1 Pc

VT110 Super black 2-head suction cup 90/80 kg 1 Pc

VT180 Super black 3-head suction cup 110/100 kg 1 Pc

VT01 Spare lever 1 Set

VT03 Spare suction cup set 1 Set

VEN004 Suction cup with vacuum meter Ø 200 185 kg 1 Pc

VEN009 Spare part for vacuum suction cup/200 knob 1 Pc

VT35 1-head plastic suction cup 40 kg 1 Pc

VT68 2-head plastic suction cup 40/20 kg 1 Pc

VP8 Suction lifter with knob, Ø 60 mm 1 Pc

VP15 Suction lifter with knob, Ø 80 mm 1 Pc

VP20 Suction lifter with knob, Ø 100 mm 1 Pc

ACCESSORIES FOR GLASSWORKS

Page 234

Art. Description Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 1143/1146 >>>

239,27

47,12

214,18

47,12

229,90

109,51

81,50

105,52

2,61

27,62

222,16

11,13

29,37

41,44

45,58

51,73

58,60

ACCESSORIES FOR GLASSWORKS

Page 235 >>> CATALOGUE REFERENCE PAGE 1147/1151 >>>

CARRIERS

CING1700 Carrying strap 1200x40 mm 1 Pc

CING1350 Carrying strap 1350x40 mm, with metal handles 1 Pc

GLOVES

GUA2243-M Value for money fabric and rubber gloves size 8 - medium 1 Pair

GUA2243-L Value for money fabric and rubber gloves size 9 - large 1 Pair

GUA2243-XL Value for money fabric and rubber gloves size 10 - extra large 1 Pair

GUA4543-M Cut and slip-resistant gloves size 8 - medium 1 Pair

GUA4543-L Cut and slip-resistant gloves size 9 - large 1 Pair

GUA4543-XL Cut and slip-resistant gloves size 10 - extra large 1 Pair

GUAKV3-M Showa gloves made of Kevlar with a PVC sheath size 8 - medium 1 Pair

GUAKV3-L Showa gloves made of Kevlar with a PVC sheath size 9 - large 1 Pair

GUAKV3-XL Showa gloves made of Kevlar with a PVC sheath size 10 - extra large 1 Pair

PALM PIECES - GLOVES

CINGM01 Rubber hand protection lap, 125x70 mm 1 Pc

PALM001 Rubber palm pieces 1 Pc

APRONS

GREMMOLL002 Wax canvas apron 1 Pc

GREMPELL001 Crust leather apron 1 Pc

DOUBLE-SIDED ADHESIVE TAPE

TS25006 ACXplus Transparent th=1mm 6mm x 25m Transparent 1 Pc

TS25009 ACXplus Transparent th=1mm 9mm x 25m Transparent 1 Pc

TS25012 ACXplus Transparent th=1mm 12mm x 25m Transparent 1 Pc

TS25015 ACXplus Transparent th=1mm 15mm x 25m Transparent 1 Pc

TS100 Adhesion promoter - 100 ml bottles Transparent 1 Pc

Art. Description Finish Q.ty EURO

53,17

158,80

5,47

5,47

5,47

13,64

13,64

13,64

45,39

45,39

45,39

11,94

14,83

81,68

84,51

36,72

55,06

73,44

89,10

52,74

3M4910F Double-sided adhesive tape 3M transparent 4910F Transparent 1 Pc

BIA001 Macmount double-sided adhesive tape TWT 1702 0.8 mm x 19 mm x 66 m White 1 Pc

BIA002 Macmount double-sided adhesive tape TWT 1702 0.8 mm x 25 mm x 66 m White 1 Pc

BIA003 Macmount double-sided adhesive tape TWT 1702 1.6 mm x 25 mm x 33 m White 1 Pc

3M4032 Scotch-mount double-sided adhesive tape 3M 4032 White 1 Pc

th.0.8 mm width 25 mm length 66 m

TESA15 Lamination tape 50600 Standard H 15 mm x 66m Green 1 Pc

TESA20 Lamination tape 50600 Standard H 20 mm x 66m Green 1 Pc

TESA25 Lamination tape 50600 Standard H 25 mm x 66m Green 1 Pc

TESA30 Lamination tape 50600 Standard H 30 mm x 66m Green 1 Pc

TESA50 Lamination tape 50600 Standard H 50 mm x 66m Green 1 Pc

GASKETS

GUR001 PVC sheets for gaskets 250 x 300 x 1 mm Transparent 1 Pc

GUR002 PVC sheets for gaskets 250 x 300 x 2 mm Transparent 1 Pc

PVC WASHERS

GT01 Die-cut PVC washers Ø 14 hole 4.5 thickness 1 mm Transparent 1 Pc

GT02 Die-cut PVC washers Ø 16 hole 6.5 thickness 1 mm Transparent 1 Pc

GT03 Die-cut PVC washers Ø 16 hole 8.5 thickness 1 mm Transparent 1 Pc

GT035 Die-cut PVC washers Ø 16 hole 10.5 thickness 1 mm Transparent 1 Pc

GT04 Die-cut PVC washers Ø 18 hole 5.5 thickness 1 mm Transparent 1 Pc

GT041 Die-cut PVC washers Ø 18 hole 6.5 thickness 1 mm Transparent 1 Pc

GT042 Die-cut PVC washers Ø 18 hole 8.5 thickness 1 mm Transparent 1 Pc

GT043 Die-cut PVC washers Ø 18 hole 10.5 thickness 1 mm Transparent 1 Pc

GT05 Die-cut PVC washers Ø 20 hole 6.5 thickness 1 mm Transparent 1 Pc

GT06 Die-cut PVC washers Ø 20 hole 8.5 thickness 1 mm Transparent 1 Pc

GT061 Die-cut PVC washers Ø 20 hole 10.5 thickness 1 mm Transparent 1 Pc

GT07 Die-cut PVC washers Ø 22 hole 8.5 thickness 1 mm Transparent 1 Pc

GT08 Die-cut PVC washers Ø 24 hole 6.5 thickness 1 mm Transparent 1 Pc

GT091 Die-cut PVC washers Ø 25 hole 6.5 thickness 1 mm Transparent 1 Pc

GT09 Die-cut PVC washers Ø 25 hole 8.5 thickness 1 mm Transparent 1 Pc

GT10 Die-cut PVC washers Ø 25 hole 10.5 thickness 1 mm Transparent 1 Pc

GT105 Die-cut PVC washers Ø 25 hole 12.5 thickness 1 mm Transparent 1 Pc

GT11 Die-cut PVC washers Ø 27 hole 10.5 thickness 1 mm Transparent 1 Pc

GT12 Die-cut PVC washers Ø 30 hole 6.5 thickness 1 mm Transparent 1 Pc

GT13 Die-cut PVC washers Ø 30 hole 8.5 thickness 1 mm Transparent 1 Pc

ACCESSORIES FOR GLASSWORKS

Page 236

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 1152/1155 >>>

63,59

53,89

72,33

45,98

158,98

8,88

11,88

14,85

17,84

29,78

5,93

9,58

0,35

0,37

0,37

0,34

0,39

0,36

0,36

0,36

0,42

0,42

0,42

0,44

0,43

0,40

0,43

0,43

0,43

0,45

0,55

0,55

ACCESSORIES FOR GLASSWORKS

Page 237 >>> CATALOGUE REFERENCE PAGE 1155/1158 >>>

GT14 Die-cut PVC washers Ø 30 hole 10.5 thickness 1 mm Transparent 1 Pc

GT145 Die-cut PVC washers Ø 30 hole 12.5 thickness 1 mm Transparent 1 Pc

GT146 Die-cut PVC washers Ø 30 hole 14.5 thickness 1 mm Transparent 1 Pc

GT15 Die-cut PVC washers Ø 30 hole 16.5 thickness 1 mm Transparent 1 Pc

GT16 Die-cut PVC washers Ø 30 hole 20.5 thickness 1 mm Transparent 1 Pc

GT17 Die-cut PVC washers Ø 35 hole 8.5 thickness 1 mm Transparent 1 Pc

GT18 Die-cut PVC washers Ø 35 hole 12.5 thickness 1 mm Transparent 1 Pc

GT185 Die-cut PVC washers Ø 35 hole 10.5 thickness 1 mm Transparent 1 Pc

GT19 Die-cut PVC washers Ø 40 hole 10.5 thickness 1 mm Transparent 1 Pc

GT195 Die-cut PVC washers Ø 40 hole 14.5 thickness 1 mm Transparent 1 Pc

GT20 Die-cut PVC washers Ø 40 hole 20.5 thickness 1 mm Transparent 1 Pc

GT215 Die-cut PVC washers Ø 45 hole 10.5 thickness 1 mm Transparent 1 Pc

GT216 Die-cut PVC washers Ø 45 hole 18.5 thickness 1 mm Transparent 1 Pc

GT217 Die-cut PVC washers Ø 45 hole 28.5 thickness 1 mm Transparent 1 Pc

GT21 Die-cut PVC washers Ø 50 hole 10.5 thickness 1 mm Transparent 1 Pc

GT22 Die-cut PVC washers Ø 50 hole 15.5 thickness 1 mm Transparent 1 Pc

GT23 Die-cut PVC washers Ø 50 hole 25.5 thickness 1 mm Transparent 1 Pc

GT231 Die-cut PVC washers Ø 55 hole 10.5 thickness 1 mm Transparent 1 Pc

GT235 Die-cut PVC washers Ø 60 hole 12.5 thickness 1 mm Transparent 1 Pc

GT24 Die-cut PVC washers Ø 75 hole 25.5 thickness 1 mm Transparent 1 Pc

ADHESIVE DROPS

GOC001 Round adhesive shock absorbers Ø 6.4 mm x h 1.9 mm sheet with 561 pcs Transparent 1 Pc

GOC005 Round adhesive shock absorbers Ø 7.9 mm x h 2.5 mm sheet with 392 pcs Transparent 1 Pc

GOC006 Round adhesive shock absorbers Ø 8 mm x h 1.6 mm sheet with 420 pcs Transparent 1 Pc

GOC007 Round adhesive shock absorbers Ø 8 mm x h 2.2 mm sheet with 392 pcs Transparent 1 Pc

GOC002 Round adhesive shock absorbers Ø 9.5 mm x h 3.8 mm sheet with 200 pcs Transparent 1 Pc

GOC008 Round adhesive shock absorbers Ø 10 mm x h 3.1 mm sheet with 288 pcs Transparent 1 Pc

GOC009 Round adhesive shock absorbers Ø 8 mm x h 3 mm sheet with 288 pcs Transparent 1 Pc

GOC010 Half-round adhesive shock absorbers Ø 10 mm x h 4 mm sheet with 242 pcs Transparent 1 Pc

GOC011 Half-round adhesive shock absorbers Ø 14 mm x h 4.5 mm sheet with 128 pcs Transparent 1 Pc

GOC003 Half-round adhesive shock absorbers Ø 12.7 mm x h 3.5 mm sheet with 200 pcs Transparent 1 Pc

GOC003SS Half-round adhesive supersoft shock absorbers Ø 12.7 mm x h 3.5 mm sheet with 200 pcs Transparent 1 Pc

GOC004 Square adhesive shock absorbers 10 mm x 10 mm x h 2.5 mm sheet with 242 pcs Transparent 1 Pc

GOC012 Square adhesive shock absorbers 12.7 mm x 12.7 mm x h 3.1 mm sheet with 200 pcs Transparent 1 Pc

GLASS PROTECTORS

APPCRIST08 Glass stand 8 mm Transparent 1 Pc

APPCRIST10 Glass stand 10 mm Transparent 1 Pc

APPCRIST12 Glass stand 12 mm Transparent 1 Pc

APPCRIST15 Glass stand 15 mm Transparent 1 Pc

APPCRIST20 Glass stand 20 mm Transparent 1 Pc

VENPAL20 Glass clamping suction cups with knob Ø 20 x 10 x 4 x Ø 6 mm - 100 pc package Translucent 1 Set

VENPAL25 Glass clamping suction cups with knob Ø 25 x 12 x 5 x Ø 7 mm - 100 pc package Translucent 1 Set

VENPAL30 Glass clamping suction cups with knob Ø 30 x 13 x 6 x Ø 8 mm - 100 pc package Translucent 1 Set

VENCIL15 Cylindrical glass clamping suction cups Ø 15 x 10 x 4 x Ø 6 mm - 100 pc package Translucent 1 Set

VENCIL20 Cylindrical glass clamping suction cups Ø 20 x 8.5 x 6.5 x Ø 6 mm - 100 pc package Translucent 1 Set

Art. Description Finish Q.ty EURO0,55

0,55

0,50

0,55

0,55

0,60

0,60

0,60

0,65

0,59

0,65

0,80

0,80

0,80

0,95

0,95

0,95

1,14

1,30

1,71

40,13

30,04

30,69

29,64

23,71

32,52

32,96

35,24

37,80

27,79

29,12

26,09

24,93

0,57

0,57

0,57

0,57

0,57

33,07

36,95

39,92

25,55

31,02

SUPP001 PVC support Ø 19 x 15 x 10 mm Translucent 1 Pc

AD3503 Straight edge protectors for glass and mirrors 35x35x3 mm - 100 pc package. Black 1 Set

AD3505 Straight edge protectors for glass and mirrors 35x35x5 mm - 100 pc package. Black 1 Set

AD3506 Straight edge protectors for glass and mirrors 35x35x6 mm - 100 pc package. Black 1 Set

AD3508 Straight edge protectors for glass and mirrors 35x35x8 mm - 100 pc package. Black 1 Set

AD3510 Straight edge protectors for glass and mirrors 35x35x10 mm - 100 pc package. Black 1 Set

AD5012 Straight edge protectors for glass and mirrors 50x50x12 mm - 100 pc package. Black 1 Set

AD5005 Straight edge protectors for glass and mirrors with rounded corner 50x50x5 mm - 100 pc package Black 1 Set

AD5006 Straight edge protectors for glass and mirrors with rounded corner 50x50x6 mm - 100 pc package Black 1 Set

AD5008 Straight edge protectors for glass and mirrors with rounded corner 50x50x8 mm - 100 pc package Black 1 Set

AD5010 Straight edge protectors for glass and mirrors with rounded corner 50x50x10 mm - 100 pc package Black 1 Set

SALVSP410 Edge guard 4 - 10 mm White 1 Pc

SALVSP1220 Edge guard 12 -20 mm White 1 Pc

SHIMS

TASA1820 Cork shims with PVC foam 18x18x2 mm - 5 sheets x 162 pc package 1 Set

TASA1830 Cork shims with PVC foam 18x18x3 mm - 5 sheets x 162 pc package 1 Set

TASB120 Cork shims with double-sided adhesive tape 18x18x2 mm - 5 sheets x 162 pc package 1 Set

TASB130 Cork shims with double-sided adhesive tape 18x18x3 mm - 5 sheets x 162 pc package 1 Set

TASS006 Cork shims 10 x 10 x 1 mm 10,000 pc package 1 Pc

TASS007 Cork shims 10 x 10 x 2 mm 10,000 pc package 1 Pc

TASS008 Cork shims 10 x 10 x 3 mm 10,000 pc package 1 Pc

TASS009 Cork shims 20 x 20 x 2 mm 2500 pc package 1 Pc

TASS010 Cork shims 20 x 20 x 3 mm 2500 pc package 1 Pc

TASR20 Red EVA wedges with double-sided adhesive tape 18x18x2 mm - 5 sheets x 162 pc package Red 1 Set

TASR30 Red EVA wedges with double-sided adhesive tape 18x18x3 mm - 5 sheets x 162 pc package Red 1 Set

TPC04 Medium density blue PVC plugs 15 x 15 x 4 mm 4450 pc package Blue 1 Pc

TPC06 Medium density blue PVC plugs 20 x 20 x 4 mm 2500 pc package Blue 1 Pc

TPC10 High density red PVC plugs 16 x 18 x 4 mm 28,000 pc package Red 1 Pc

AERATORS

AER1 Aerators for windows 120 with closure Transparent 1 Pc

AER2 Aerators for windows 160 with closure Transparent 1 Pc

AER3 Aerators for windows 160 with double grille + mesh without fan Transparent 1 Pc

AER4 Aerators for windows 200 with closure Transparent 1 Pc

AER5 Aerators for windows 200 with double grille + mesh without fan Transparent 1 Pc

AER6 Aerators for windows 240 with closure Transparent 1 Pc

AER7 Aerators for windows 200 electric Transparent 1 Pc

ACCESSORIES FOR GLASSWORKS

Page 238

Art. Description Finish Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 1158/1162 >>>

1,39

10,36

10,36

10,36

14,57

14,57

33,64

29,59

29,59

35,59

37,69

0,43

0,66

19,87

20,58

14,19

14,90

49,77

55,37

61,50

55,37

61,50

14,19

14,90

67,63

67,63

477,80

19,91

28,12

21,55

34,90

28,33

46,39

123,17

ACCESSORIES FOR GLASSWORKS

Page 239 >>> CATALOGUE REFERENCE PAGE 1163/1166 >>>

PILLOW-UP

PW-UP PILLOW-UP fast installation per millimetre Black 1 Pc

GLASS LIFTING SPATULAS

SPVS4008 Large glass lifting spatula 1 Pc

SPVS4002 Small glass lifting spatula 1 Pc

SHIMS

SPE2392 Glass shims 10x30 mm thickness 2 x 1kg package Red Per kg

SPE2393 Glass shims 10x30 mm thickness 3 x 1kg package Yellow Per kg

SPE2394 Glass shims 10x30 mm thickness 4 x 1kg package Black Per kg

SPE2395 Glass shims 10x30 mm thickness 5 x 1kg package White Per kg

SPE2397 Glass shims 10x30 mm thickness 7 x 1kg package Green Per kg

SPE2402 Glass shims 20x30 mm thickness 2 x 1kg package Red Per kg

SPE2403 Glass shims 20x30 mm thickness 3 x 1kg package Yellow Per kg

SPE2404 Glass shims 20x30 mm thickness 4 x 1kg package Black Per kg

SPE2405 Glass shims 20x30 mm thickness 5 x 1kg package White Per kg

SPE2407 Glass shims 20x30 mm thickness 7 x 1kg package Green Per kg

SPE2502 Double glazing shims 24x40 mm thickness 2 mm x 1kg package Red Per kg

SPE2503 Double glazing shims 24x40 mm thickness 3 mm x 1kg package Yellow Per kg

SPE2504 Double glazing shims 24x40 mm thickness 4 mm x 1kg package Black Per kg

SPE2505 Double glazing shims 24x40 mm thickness 5 mm x 1kg package White Per kg

SPE2507 Double glazing shims 24x40 mm thickness 7 mm x 1kg package Green Per kg

SPE2602 Double glazing shims 30x40 mm thickness 2 mm x 1kg package Red Per kg

SPE2603 Double glazing shims 30x40 mm thickness 3 mm x 1kg package Yellow Per kg

SPE2604 Double glazing shims 30x40 mm thickness 4 mm x 1kg package Black Per kg

SPE2605 Double glazing shims 30x40 mm thickness 5 mm x 1kg package White Per kg

SPE2607 Double glazing shims 30x40 mm thickness 7 mm x 1kg package Green Per kg

SPE2702 Double glazing shims 20x100 mm thickness 2 mm x 1kg package Red Per kg

SPE2703 Double glazing shims 20x100 mm thickness 3 mm x 1kg package Yellow Per kg

SPE2704 Double glazing shims 20x100 mm thickness 4 mm x 1kg package Black Per kg

SPE2705 Double glazing shims 20x100 mm thickness 5 mm x 1kg package White Per kg

SPE2707 Double glazing shims 20x100 mm thickness 7 mm x 1kg package Green Per kg

SPE2802 Double glazing shims 24x100 mm thickness 2 mm x 1kg package Red Per kg

SPE2803 Double glazing shims 24x100 mm thickness 3 mm x 1kg package Yellow Per kg

SPE2804 Double glazing shims 24x100 mm thickness 4 mm x 1kg package Black Per kg

SPE2805 Double glazing shims 24x100 mm thickness 5 mm x 1kg package White Per kg

SPE2807 Double glazing shims 24x100 mm thickness 7 mm x 1kg package Green Per kg

GLASS-TIC

FGLASST Glass-tic alu tape reel h 100 mm length 10 m Aluminium 1 Pc

FELT

FN4 Black felt H 4000 mm Per m2

Art. Description Finish Q.ty EURO

43,34

34,21

25,09

10,40

10,40

10,40

10,40

10,40

8,67

8,67

8,67

8,67

8,67

12,32

12,32

12,32

12,32

12,32

11,40

11,40

11,40

11,40

11,40

14,14

14,14

14,14

14,14

14,14

14,60

14,60

14,60

14,60

14,60

43,79

21,90

SILICONES & SEALANTS - ACETOXY

DW781TR Traditional acetic silicone, 310 ml cartridge 12 pc package Transparent ✓ 1 Pack

DW781NE Traditional acetic silicone, 310 ml cartridge 12 pc package Black ✓ 1 Pack

DW784TR Anti-mould acetic silicone, 310 ml cartridge 12 pc package Transparent ✓ 1 Pack

DW881TR Acetic silicone with high adhesion for glass, Transparent ✓ 1 Pack

310 ml cartridge 12 pc package

DW881NE Acetic silicone with high adhesion for glass, Black ✓ 1 Pack

310 ml cartridge 12 pc package

SILICONES & SEALANTS - NEUTRAL

DW799TR Anti-mould neutral silicone, 310 ml cartridge 12 pc package Transparent ✓ 1 Pack

DW796BI Alkoxy neutral silicone, 310 ml cartridge 12 pc package White ✓ 1 Pack

DW796NE Alkoxy neutral silicone, 310 ml cartridge 12 pc package Black ✓ 1 Pack

DW796GR Alkoxy neutral silicone, 310 ml cartridge 12 pc package Grey ✓ 1 Pack

DW796MA Alkoxy neutral silicone, 310 ml cartridge 12 pc package Brown AVAIL. UPON ORDER 1 Pack

DW796TM Alkoxy neutral silicone, 310 ml cartridge 12 pc package Dark brown AVAIL. UPON ORDER 1 Pack

DW817BI Neutral silicone for mirrors, 310 ml cartridge 12 pc package White ✓ 1 Pack

SILICONES & SEALANTS - NEUTRAL WITH HIGH PERFORMANCE, RESISTANT TO WEATHERING

DW791NE High performance neutral silicone, 310 ml cartridge 12 pc package Black ✓ 1 Pack

DW791TTR High performance neutral silicone, 310 ml cartridge 12 pc package Transparent ✓ 1 Pack

DW895NE Neutral silicone with high structural performance, Black ✓ 1 Pack

310 ml cartridge 12 pc package

SILICONES & SEALANTS - POLYMERS

DWCLETC Clearfi x polymer sealant, 290 ml cartridge 12 pc package Transp. crystalline ✓ 1 Pack

DWHTKBI High tack polymer sealant, 290 ml cartridge 12 pc package Ehite ✓ 1 Pack

SILICONES & SEALANTS - PRIMERS

DWPRCTR Primer C for mirrors, Tefl on and painted surfaces, 250 g tin Transparent ✓ 1 Pc

DWPRPTR Primer 1200 OS for smooth surfaces, 500 ml bottle Transparent ✓ 1 Pc

SILICONES & SEALANTS - SILICONE GUNS - SILICONE SPREADERS

DWGUNSTE Slatted gun ✓ 1 Pc

DWGUNSKE Skeleton gun ✓ 1 Pc

DWGUNMAN Manual gun for bags AVAIL. UPON ORDER 1 Pc

DWGUNMANUG Set of 5 nozzles for manual gun for bags ✓ 1 Set

DWSIL Set of accessories for spreading silicone ✓ 1 Set

ACCESSORIES FOR GLASSWORKS

Page 240

Art. Description Colour Avail. Q.ty EURO

>>> CATALOGUE REFERENCE PAGE 1169/1179 >>>

73,90

73,90

75,54

169,15

169,15

81,29

71,44

71,44

71,44

71,44

71,44

108,80

120,71

176,13

236,90

139,59

133,43

33,12

61,93

10,88

51,32

98,54

18,82

15,97

ANALYTICAL INDEX

Page 241

ANALYTICAL INDEX

Page 242

042,3005,100042,3005,200042,3005,300042,3005,400042,3005,600042,3102,071042,3102,072042,3114,071057,3010,001057,3030,071057,3073,071057,3073,072057,3078,002057,3080,001057,3080,002057,3084,200057,3084,300057,3084,400057,3084,600057,3085,200057,3085,300057,3085,400057,3085,600057,3099,071057,3114,0713M40323M4910F3MSGPAD3503AD3505AD3506AD3508AD3510AD5005AD5006AD5008AD5010AD5012AER1AER2AER3AER4AER5AER6AER7ANG001ANG002ANG003ANG004ANG216ANG220ANG316ANG320APPCRIST08APPCRIST10APPCRIST12APPCRIST15APPCRIST20APRO1008APRO1010APRO1012APRO1013APRO1020APRO1050APRO10UDAPRO10USAPRO11DDAPRO11DSAPRO1203HAPRO1203HDAPRO1203HPAPRO2203HAPRO2203HDAPRO2203HPAPRO4008

Art.787878787877771007065104104771041048080808077777777104104236236180238238238238238238238238238238238238238238238238238198198198198190190190190237237237237237118118118118118118117117117117119119119119119119118

PageAPRO4010APRO4012APRO4013APRO4040APRO4080APRO40DAPRO40UAPROIN1203HAPROIN2203HAPROMADXDAPROMADXUAPROMASXDAPROMASXUAPROMEDXDAPROMEDXUAPROMESXDAPROMESXUATEC0ATEC5ATP415ATP4215ATP4365ATP452ATP453ATP45315ATP453215ATP453365ATP45365ATP465ATP50ATP50315ATP503215ATP503365ATP50365ATP515ATP5215ATP5365ATP565ATP60ATT10ATT15ATT20ATT3VATT3VCF5ATT40ATT45ATT50ATT90ATT90CF5ATTANGATTANGCF5ATTLINATTLINCF5B213000B214200B273000B274200BC10BC10HLBC10VLBCOFIS15BBCOFIS20BBCOFIS25BBCOFIS30BBCOFIS40BBCOFIS7BBDFIX10BDFIX2-DXBDFIX2-SXBDFIX5-DXBDFIX5-SXBDFIX7-DXBDFIX7-SXBDFIX8BDFIX-DX

Art.11811811811811811711711911911811811811811811811811818418411111111111111111111111111111111111111101212124141121212414141414141188187188188494949494949494949144144144144144144144144144

PageBDFIX-SXBIA001BIA002BIA003BOR01BOR02BOR03BORC25BORC30BORC35BORC40BORC45BORC50BORC55BORKIA0BORKIA1BORKIA2BORKIA3BORKIA33BORKIA4BORKIA40BORKIA5BORKIA6BORKIA66BORKIA7BS10BS10HLBS10VLBT28BT31BT3320BT3325BT3520BT3525CAL001CAL002CAL003CAL004CAL005CAL006CAL007CAL008CAL009CAL010CAL17CAL18CAL23CAL27CALMU30CALUV25CALUV50CAN001CAN002CANAL06CANAL1CANAL12CANAL13CANAL14CANAL16CANAL2CANAL22CANAL23CANAL24CANAL26CANAL3CANAL32CANAL33CANAL34CANALH88CANALH90CANALH92CANALM01CANALM012CANALM02CANALM022

Art.144236236236555555606060606060605050505050505050505050494949124179169169179179199199199199124125125125211211211211211211125211211185185176176176176176177177177177177177177177177177178178178178178178178

PageCANALM03CANALM032CANALSF48CANALSF50CANALSF52CANALSU66CANALSU68CANALSU70CANALSU72CANANG1CANANG12CANANG13CANANG14CANANG2CANANG22CANANG23CANANG24CANANG3CANANG32CANANG33CANANG34CAR001CAR002CAR003CAR004CAR005CAR021CAR022CAR024CAR026CAR028CC000CC001CC002CE305PG10CEA42DXCEA42SXCEACC40DCEACC40SCEACC50DCEACC50SCEALL35DCEALL35SCELEGA35DCELEGA35SCER100CER100SQCER1024CER1025CER1027CER1028CER1031CER1092CER1173CER1174CER148CER160CER168CER175CER178CER200CER217CER26CER2660CER27CER28CER29CER30CER305BCER305PA6CER305PBCER306BCER31CER32CER33

Art.178178178178178178178178178177177177177177177177177177177177177232232232232232232232232232232213213213191208208209209209209209209209209193194192192193193192193193193120119120119120192192164192164165165165193191191193165165165

PageCER334CER334LCER336CER336LCER360UVCER4ALCER4ALSQCER50CER50SQCER560CER630CER650CER670CER700CER700UVCER710CER720CER720UVCER751CER755CERBA2CERBIL55DXCERBIL55SXCERBIL80DXCERBIL80SXCERBUSCERLMDXCERLMSXCERMGLISSCERPOS120CERPOS170CERPOS170ALLCERPOS170COVCERPOS500CERPOS80CERPT80CERPT80SQCERS401CERS403CERS405CERS407CERS409CERS411CERUV1CERUV25CERUV25LGCERUV35CERUV35LGCERUV38CERUV390CERUV40CERUV40LGCERUV55CERUVQCERUVS100CERUVTONCERZ31CERZ3180CERZ33CGS1620DXCGS1620SXCGS1640DXCGS1640SXCHD10CHD1135CHD12CHD180CHD190CHD20CHD2135CHD22CHD280CHD290CHDA05CHDA06

Art.192192192192208119119194194193193193193162151193162151194194208191191191191191208208123101101100100100101114114194195195195195195207210210210210207208209209209208209208166166166105105105105159159159159159159160159159159161161

Page

ANALYTICAL INDEX

Page 243

CHDA08CHDA1000CHDA1000GCHDA1500CHDA1500GCHDA500CHDA500GCHDA55CHDA55GCHDA65CHDA65GCHDA75CHDA75GCHDA83CHDA831CHDA85CHDA851CHDA86CHDA861CHDA88CHDA90CHDA901CHDA93CHDM41CHDM43CHDM45CHDM47CHDM52CHDM57CHDT1000CHDT1000GCHDT1500CHDT1500GCHDT500CHDT500GCHLUV10CHLUV20CHN28CHN31CHSETT19CHSETT32CING1350CING1700CINGM01CISA2227DCISA2227UCL105CL95CLH12CLHM14CLK20CLKM27CLM11CLM19CLM25CLP23CLPM29CLS10CLS18CLS24CLS245CLS68CLS70CMIRR10.2000CMIRR10.3000CMIRR12.2000CMIRR12.3000CMIRR6.2000CMIRR6.3000CMIRR8.2000CMIRR8.3000CMIRRTP10CMIRRTP12CMIRRTP6CMIRRTP8

Art.1611601601601601601601611611611611611611611611611611611611621611611621601601601601601601611611611611611612122121031036161235235235122122164103103103167167103164167164164103164167167167167178178178178178178178178178178178178

PageCOFIS15BCOFIS15NCOFIS20ACOFIS20BCOFIS20NCOFIS25BCOFIS25NCOFIS30ACOFIS30BCOFIS30NCOFIS40BCOFIS40NCOFIS45BCOFIS50BCOFIS50NCOFIS6BCOFIS6NCOFIS7BCOFIS7NCON1052BCON1072BCON1102BCON2052BCON2072BCON2102BCON3075BCON4104BCON712BCORF50CORF50357CORF50359CORF50364CORF-52027CORFAM3075CORFAV44106CORFCR4140CORF-DOW25-55CORFGLT4101CORFGM175CORFGM215CORFPP3110CORFT42316CORFTT4301CORF-UP25-55CORLM01CORLM03CORLM05CORLM07CORLM09CORLM11CORLM13CORLM15CORLM17CORLM1730CCORLM1730SCORLM1760CCORLM1760SCORLM19CORLM21CORLM2130CCORLM2130SCORLM2160CCORLM2160SCORLM23CORLM25CORLM27CORLM29CORLM31CORLM33CORLM35CORLM37CORLM39CORLM41CORLM43CORLM45

Art.494942494949494249494949114949494949494040404040404040401717171718181817171717171817181715151515151515151615151515161615151515161616161616161616161616

PageCP1000CP1200CP1600CP2000CP400CP600CPH10CPH20CPLEVCPM247CPOMCPR1010CPR66CPR88CPRAL1010CPRAL1010TPCPRAL88CPRAL88TPCPVENCREBPD20CRECLK1CRECLK3CRECPK1CRECPK3CREDMAP1CREMDMA1CREMDMA2CREMDMA3CREPK11CREPK13CREPK71CREPK73CRESVCE2CRESVDX1CRESVSX3CREVEN1CSFE20CSFE30CSP75CSP85CTV01CTV10CTV1000CTV1200CTV600CTV800CUB001CUB002CUB003CUB004CUB005CUB006CUB007CUSC002CUSC003CUSC004CUSC005CUSC006CUSC007CUT001CUT002CUT003CUT004CUT005CUT007CVM01CVM03CVM05DCC08DCC10DCC218DCC220DCC90DCCFLAT003DCCFLAT007

Art.22322322322322322322222222316722318181819191919223206206206206206206206206206206206206206206206206206213213164164222222222222222222198198198198198198198189189189189189189232232232232223223213213213140140148148140141141

PageDCCFLAT009DCCFLAT011DCCFT12DCCFT16DCCFT18DCCFT20DCCFT90DCCFTMURDCCFTVETDCCFTVVDCST10DCST13DCST30DCST60DCY101010DCY101015DCY101310DCY101315DCY101815DCY101820DCY131510DCY13155DCY13156DCY13158DCY132010DCY13205DCY13206DCY13208DCYB13DCYB15DCYB18DCYB20DCYDP14DCYDP150DCYDP25DCYDP2510DCYDP2512DCYDP300DCYDP50DCYDP58DCYF1316DCYF1318DCYF1320DCYF1324DCYF1820DCYF1822DCYF1826DCYF1830DCYM615DCYM620DCYMX01DCYMX03DCYMX05DCYMX07DCYMX1310DCYMX1315DCYMX1320DCYMX135DCYMX1810DCYMX1815DCYMX1820DCYMX185DCYOT13DCYOT18DCYP3075DCYP7520DCYSV13DCYSV18DCYTV13DCYTV18DCYUV4DF100,15DF100,30DF100,60DF101,15

Art.14114113913913913913913913913957575757535353535353545454545454545455555555562005656562005656535353535353535353535555555555555555555555555555565655555353545556

PageDF101,30DF101,60DF1010DF1010.60DF12072DF12072ALDF12077DF12077ALDF12772DF12772ALDF135DF135KIT12DF175DF175KIT12DF175TPDF175TPALDF215DF215KIT12DF215TPDF215TPALDF2TPDF2TPALDF30DF450,15DF450,15ASDF450,30DF450,30ASDF450,60DF450,60ASDF45001DF45001NFDF45017,15DF45017.30DF45017,60DF45021,15DF45021.30DF45021,60DF450FOROASDF88DF88.60DFA72054DFA7230DFA7230NFDFA7260DFA7260NFDFCHDFCH2DFFH10A4DFFH10ZNDFFH12A4DFFH12ZNDFGDDFS01,15DFS01,30DFS01,60DFS0117,15DFS0117,30DFS0117,60DFS0121,15DFS0121,30DFS0121,60DFS03,15DFS03,30DFS03,60DFS05,15DFS05,30DFS05,60DFS07,15DFS07,30DFS130DXDFS130DXALDFS130SXDFS130SXALDFS182DXDFS182DXAL

Art.666666777755557755777785959598844444496698888889999955544444466666666777788

Page

ANALYTICAL INDEX

Page 244

DFS182SXDFS182SXALDFSA121054DFSA12130DFSA12160DFSA180054DFSA18030DFSA18060DFSDXDFSDXALDFSSXDFSSXALDFSV2ALDXDFSV2ALSXDFTAGLIODFTASDFTASA4DFTEC1010DFTEC88DGM45BDGM45CDGS002DGS003DGS005BDGS005GDGS005NDGS005RDGS005VDGS006RBGDGS006RBLUDGS007BDGS007GDGS007NDGS007RDGS007VDGS008RBGDGS008RBLUDGS011BDGS011GDGS011NDGS011RDGS011VDGS012RBGDGS012RBLUDGS035DH1510DH1515DH1520DH1810DH1815DH1820DH2215DH2220DH2225DH2515DH2520DH2525DISC001DISC002DISC003DISC004DISC005DISC0055DISC006DISC007DISC008DISC009DISC036DISC151DISC152DISC153DIST001DIST002DIST003DIST004

Art.8899999977777789988101022822822822822822822822822822822822822822822822822922922822822822922922854545454545454545454545421421421421421421421421421421421421421421460606060

PageDIST005DISTB30DISTB40DISTB50DISTC2004DISTC2010DISTCOFIS1DISTCOFIS10DISTCOFIS11DISTCOFIS12DISTCOFIS2DISTCOFIS3DISTCOFIS4DISTCOFIS4025DISTCOFIS4040DISTCOFIS5DISTCOFIS5025DISTCOFIS5040DISTCOFIS6DISTCOFIS7DISTCOFIS76DISTCOFIS78DISTCOFIS8DISTCOFIS86DISTCOFIS88DISTCOFIS9DISTCOFIS925DISTCOFIS940DISTCOFISRDISTQ1415DISTQ1620DISTQ1825DISTQ2030DISTQA35DISTQA50DISTV2004DISTV2010DOCCIAUV05DOCCIAUVMURDOM3VDOM3VCF2DOM3VCF3DOM90DOM90CF2DOM90CF3DOMANGDOMANGCF2DOMANGCF3DOMLINDOMLINCF2DOMLINCF3DQ30DQ30COVDQ3135DQ32DQ37DQ375DQ380DQ390DQ40DQ4135DQ42DQ475DQ480DQ490DQ497DQA05DQA06DQA08DQA1000DQA1500DQA500DQA55DQA65DQA75

Art.60111111545450501111505050505050505050505050505050505050115454545452525454145145414141414141414141414141151151152152152152152152153153153153153153154157157157156156156157157157

PageDQA83DQA85DQA86DQA8670DQA87DQA88DQA89DQA90DQA93DQA99DQC35DQC37DQC38DQC39DQC395DQC51DQC53DQC55DQC575DQC58DQC59DQC61DQC63DQC65DQM07DQM09DQM11DQM41DQM43DQM45DQM47DQM49DQM50DQM52DQM54DQM57DQMATIQUE3DQMATIQUE44DQMATIQUE480DQMATIQUE66DQMATIQUE680DQMP2DQMP4DQMP6DQMP7DQP2525DQP365DQP375DQP385DQS11DQS13DQS15DQS21DQS23DQS25DQS37DQT1000DQT1500DQT500DQTS2525DQX1000DQX1500DQX500DW781NEDW781TRDW784TRDW791NEDW791TTRDW796BIDW796GRDW796MADW796NEDW796TMDW799TRDW817BI

Art.157157157157157158158157158158152152152153153154154154154154154154108108155155155155155155155155155155156155115115115115115156156152151137158158158102101101102101101102156156156137156156156240240240240240240240240240240240240

PageDW881NEDW881TRDW895NEDWCLETCDWGUNMANDWGUNMANUGDWGUNSKEDWGUNSTEDWHTKBIDWPRCTRDWPRPTRDWSILELEK100ELEK218ELEK290ELEK390ELEK436ELEKTRA100ELEKTRA218ELEKTRA290ELEKTRA390ELEKTRA436EVODR304EVODR304DISTEVODR316EVODR316DISTEVODRGFA100FA180FA50FA580FA7035FACC001FC16061FC28061FC300M61FC300R61FC8061FC8061BFCAT10050FCAT15061FCLAMP1FCLAMP4FCLAMP7FGLASSTFH300CFIXBORK1FIXBORK40FIXGHIERA10FIXGHIERA40FIXGHIERA8FLUIDO1FLUIDO100FLUIDO180FLUIDO2FLUIDO270FLUIDO360FLUIDO45FLUIDO90FLUIDODXFLUIDOSXFN4FPT01FPT03FPT07FPT09FPT11FPT13FPT15FPT21FR300RFSP193FX10,100FX10,1000FX10,250

Art.24024024024024024024024024024024024039393939393939393939101010101011711711711745233232232232232232232232232262626239117121339131226262626262626262626218124124124124124124124124116185216216216

PageFX1000FX2000FX621,100FX621,1000FX621,250FX621GEL30FX627,100FX627,1000FX627,250FX629,100FX629,1000FX629,250FX630,100FX630,1000FX630,250FX635,100FX635,1000FX635,250FX973,100FX973,1000FX973,250FX973GEL.30FXADGHFXATTFXBC01FXBC03FXBC05FXBC50FXBOXLED365FXBOXLED405FXFIREFXGAB01FXGAB02FXGAB03FXGAB04FXGAB05FXGAB06FXGAB07FXGAB08FXGAB09FXGAB10FXGAB11FXGAB12FXGAB13FXGAB14FXGEL01FXGEL03FXGEL30FXGHFXGH1.37FXGH33FXGH41FXGH58FXGH84FXGL50FXGM50FXGS50FXGXL50FXPIR200FXPIR400FXTERM01FXTNT01FXUVHAND03FXUVHAND05FXUVHAND09FXUVHAND11FXUVHAND13FXUVHAND15FXUVLED001FXUVLED365FXUVLED405FXUVLEDLINE365FXUVLEDLINE405FXVP01G913000

Art.180217216216216216216216216216216216216216216216216216216216216217216217217217217217219219217151207208208208209209210210134213213213210217216216216216216216216216218218218218217217218180219219219219219219219219219219219217188

Page

ANALYTICAL INDEX

Page 245

G914200G933000G934200G953000G954200GABDOCCIAUVGAMB127GAMB130GAMB3CGAMB60AGAMB60BGAN001GAN002GAN003GARDAMLGARDATDGC-CAV100GC-CAV1100GC-CAV1300GC-CAV15GC-CAV300GC-GZT130GCL15GCL19GCL21GCL23GC-PERN120GC-PERN155GC-PERN270GC-PERN355GC-PEROUT155GC-PEROUT162GC-PEROUT355GC-ROT101GC-ROT145GC-SNOD1100GC-SNOD1300GC-SNOD143GC-SNOD15GC-TEND130GF100GF150GF150FGF200GF210GF400GF410LGF410RGF510GF600GF700GF710GF800GF810GK200GK300GK800GL10GL200PGL200SGL200SUGL25GL7100GL7200GL7300GL7311GL7433GL7439GL800GL8806STPDXGL8815GL8819GL8823GL8824GLM2000

Art.18718818818818814521421421421421418518518511111124252523242423232323242524252524252424252524232410911011010910910911011011010911011011011010910911110710910910910711010911110811111111111111111111111165

PageGLM20002MURGLM20002VETGLM20003MURGLM20003VETGLM20004MURGLM20004VETGLM2000ECOGLM2106GLM2500GLM25002SOFGLM25003SOFGLM25004SOFGLM3000GLM30002MURGLM30002VETGLM30003MURGLM30003VETGLM30004MURGLM30004VETGLM3020GLM3023GLM32002PARGLM32003PARGLM32004PARGLM33M5GLM33VTGLM6500GLM7000GLM70002PLAGLM70003PLAGLM70004PLAGLM8300AGLM8500GLMANGLMATMGLMATSGLMATVGLMBDAN45GLMBDAN60GLMBDLN15GLMBDLN30GLMBLC01GLMBLCDXGLMBLCSXGLMBRMGLMBRVGLMBSTGLMBST200GLMBST300GLMBST400GLMCAV2GLMCAV3GLMCAV4GLMDCCFOROGLMDSTPGLMDSTVGLMFERMGLMFLAT028DXGLMFLAT028SXGLMFLAT030GLMFLAT032DXGLMFLAT032SXGLMFLAT034GLMFLAT036GLMFLAT038GLMFLATMURGLMFLATVETGLMFOROGLMFT1000GLMFT12GLMFT14GLMFT16GLMFT18GLMFT20GLMFT2000

Art.666666666666646666676767676868686868686968696969656563697171716562146636263146146146146676565676762626262656565139686862144144144144144145145145141141146139142142142142142139

PageGLMFT26GLMFT30GLMFT3000GLMFT37GLMFT40GLMFT50GLMFT508GLMFT90GLMGREGGLMMOLLGLMRCGLMRCTGLMRLGLMSFOROGLMSPA06GLMSPA08GLMSPA10GLMSSTGLMSTOPDXGLMSTOPSXGLMSVFGLMTND20GLMTND30GLMTND40GLMUVFOROGM01GM012200GM013000GM014GM01422GM01425GM0143000GM02GM0210GM022500GM04GM0422GM042500GM043000GM05GM0522GM052500GM0530GM06GM0622GM0625GM063000GM0722GM0725GM073000GM11DXGM11DX2500GM11SXGM11SX2500GM12DXGM12DX2500GM12SXGM12SX2500GM13DX3000GM13SX3000GM1520DXGM1520SXGM1530DXGM1530SXGM15DXGM15SXGM1720DXGM1720SXGM1730DXGM1730SXGM17DXGM17SXGM40GM4025GM4030

Art.14414113913914014114214062656214662141143143143716262147676767145182182182181181181181181181181181181181181182182182182181181181181182182182182182182182182182182182182182181181181181181181181181181181181181180180180

PageGM42GM4225GM4230GM44GM4425GM4430GM46GM4625GM4630GM4810GM4822GM4825GM4830GM50GM5030GM5210GM5222GM5225GM5230GM5610GM5620GM5625GM5630GM58GM5830GM6010GM6020GM6025GM6030GM62GM6225GM6230GM6230DXGM6230SXGM62DXGM62SXGM65002MURGM65002VETGM65003MURGM65003VETGM65004MURGM65004VETGM6630DXGM6630SXGM66DXGM66SXGM7022GM7025GM7030GM7222GM7225GM7230GM8020GM8025GM85002PLAGM85003PLAGM85004PLAGMPINZGMPINZ02GMVHB1GMVHB13000GMVHB13000NRGMVHB1NRGMVHB2GMVHB2NRGMVHB3GMVHB33000GMVHB33000NRGMVHB3NRGMVHB4GMVHB43000GMVHB43000NRGMVHB4NRGNW20GNW3500

Art.1801801801801801801801801801811811811811811811811811811811831831831831821821831831831831821821821821821821826464646464641821821821821821821821821821821831836263631831831791791791791801801801801801801791791791797070

PageGNW35002GNW35003GNW35004GOC001GOC002GOC003GOC003SSGOC004GOC005GOC006GOC007GOC008GOC009GOC010GOC011GOC012GREMMOLL002GREMPELL001GS01100GS01875GSB12GSB831GSL3000GSL812GSLS217GSLSVLGSP03100GT01GT02GT03GT035GT04GT041GT042GT043GT05GT06GT061GT07GT08GT09GT091GT10GT105GT11GT12GT13GT14GT145GT146GT15GT16GT17GT18GT185GT19GT195GT20GT21GT215GT216GT217GT22GT23GT231GT235GT24GTUP2GTUP2300GTUP2300GGTUP2GGTUP3GTUP3250GTUP3250GGTUP3G

Art.707070237237237237237237237237237237237237237235235125125104104125125104104125515151515152525252525252525252525252525252525252525252525252525252525252525252522929292929292929

Page

ANALYTICAL INDEX

Page 246

GTUP4GTUP4160GTUP4160GGTUP4GGTUP5GTUP5120GTUP5120GGTUP5GGUA2243-LGUA2243-MGUA2243-XLGUA4543-LGUA4543-MGUA4543-XLGUAKV3-LGUAKV3-MGUAKV3-XLGUR001GUR002GZ-TS071924GZ-TS3000VGZ-TS500NV110GZ-TS500NV90GZ-TS550NVGZ-TSADTHAND10052HAND10052VHBHAND10057HAND10057VHBHAND12062HAND12062VHBHAND13040HAND13040VHBHAND6640HAND6640VHBHD+3301HD+3302DHD+3302FHD+3303HD+3304HD+3305DHD+3305PHD+3305UHD+3306HD+3307DXHD+3307SXHD+3308DXHD+3308SXHD+3309HD+3310HS1010PBHS1010PSHS1010SBHS1010SPLHS1010SSHS66100HS66200HS66INFHS66POZHS66POZSLHS66SAFEHS66SUPHW,18619IBT100IBT10015IBT10030IBT70IBT7015IBT7030IBT90145IBT9014515IBT9014530IBTCUTIG500IG500TP

Art.162929293232343423523523523523523523523523523623611311311311311311313213313313313313313213313213210710710710510810810810810810810810810810810810510510510510510510510510510510510597363636363636363636364040

PageIG600IG600TPIG650IG650TPIG750IG750TPIG850IG850TPIMB2544IMB254415IMB254430IMB4344IMB434415IMB434430IMBCUTIMBGIMBG250IMBKIT100-12IMBKIT100-8IMBKIT12IMBKIT1212IMBKIT128IMBKIT2250IMBKIT70-12IMBKIT70-8IMBKIT8IMBKIT812IMBKIT88JOFAGLAME01LAME02LAME03LAME05LAME07LAME09LAME11LAMP005LAMP005LLAMP006LAMP008LAMP009LAMP014LAMP016LAMRASCH001LAMRASCH003LAMRASCH005LDSPC15LDSPC2215LDSPC2230LDSPC30LDSPTRAFO24LED12030LED12050LED12060IPLED12075LED12100IPLED24035IPLED24050LED24100LED2835LED2835CCTLED3528LED352866LED5050LED505066LED5050RGBLED5050RGB66LEDCCTLEDCRGBLM128LM21.200LM21.300LM21.400LM21.600LM21200B

Art.4040404040404040373737373737373737373737373738373737373740218218218218218223223219219219219219218218223218218189189189189189202020202020202020220202202020202020201308383838392

PageLM21300BLM213200BLM213300BLM213400BLM21400BLM224LM2950CLM2F200BLM2F300BLM2F400BLM3100LM3110,200LM3110,300LM3110,400LM3110,600LM3120,200LM3120,300LM3120,400LM3120,600LM31200BLM3130,200LM3130,300LM3130,400LM3130,600LM31300BLM313200BLM313300BLM313400BLM3140LM31400BLM3150LM3170LM3173LM3175LM3180LM3185LM3195LM3198LM3199LM320LM3F200BLM3F300BLM3F400BLM41,200LM41,300LM41,400LM41,600LM51.200LM51.300LM51.400LM51.600LM6010525LM6010533LM6025LM609020LM609025LM609033LM61.200LM61.300LM61.400LM61.600LM705LM710,200LM710,300LM710,400LM710,600LM747,200LM747,300LM747,400LM747,600LM750200BLM750300BLM750400BLM770200BLM770300B

Art.92939393921309595959587828282828787878787888888888789898987888891909193938384841309090918989898995959595114114114114114114989898988283838383858585858383838484

PageLM770400BLM777200BLM777300BLM777400BLMC13LMC13.100LMC13.150LMC13.200LMCHLMDOCCIA01LMDOCCIA03LMDOCCIA05LMDOCCIA07LMGAB01LMGFLMGWLMGWF200LMGWF300LMGWF400LMGWI.B200LMGWI.B300LMGWI.B400LMGWI.B600LMGWI200LMGWI300LMGWI400LMGWS200LMGWS300LMGWS400LMGWSB200LMGWSB300LMGWSB400LMGWSB600LMGWSI200LMGWSI300LMGWSI400LMGWSIB200LMGWSIB300LMGWSIB400LMGWSIB600LMGWST01LMP0LMPERNODLMPERNOFLMPERNOILMS105LMS6210520LMS6210530LMS6210540LMS627520LMS627530LMS627540LMS64200LMS64300LMS64400LMS75LMSB6220LMSB6230LMSB6240LMSB6260LMSB6420LMSB6430LMSB6440LMSB6460LMSBF5620LMSBF56200LMSBF5630LMSBF56300LMSBF5640LMSBF56400LMSBF5660LMSBF8520LMSBF85200LMSBF8530LMSBF85300

Art.84868686751487514810314914914914920877778282827878787879797980808079797979777777777777778097114114114727373737272737474747272727272737373737475747574757475767576

PageLMSBF8540LMSBF85400LMSBF8560LMSC7220LMSC7230LMSC7240LMSC7260LMSD10015LMSD10020LMSD10030LMSD21MMLMSD23MVLMSD25VVLMSD27MAMLMSD5015LMSD5020LMSD5030LMSINCROLMST01LMST03LMSTOPLMTR2DXLMTR2SXLMTR3DXLMTR3SXLMTRA3COVDXLMTRA3COVSXLMTRB3COVDXLMTRB3COVSXLMTRC3COVDXLMTRC3COVSXLMTRD4COVDXLMTRD4COVSXLMTRE4COVDXLMTRE4COVSXLMTRF4COVDXLMTRF4COVSXLMU20,150LMU20,300LMU20,300KRLMU20TPLMU20TPKRLOGS10DLOGS10ULR1000LR1100LR300LR320LR400LR500LR900M4335ZM4335Z40M4345ZM4345Z30M4345Z40M4345Z60M4353ZM4353Z30M4353Z40MA08110MA08210MA084MA089MA091MA092MA101MA102MA12MA14MA1540MA1555MA17MA1945MA1960

Art.76767672727272147147147147147147147147147147827275149959598989797979797979999100100100100787815078179108108184184184184184184184454545454545454545464646464545454544444646444646

Page

ANALYTICAL INDEX

Page 247

MA21MA401MA402MA501MA502MABDQ40MABDT40MAK10MAK300MAK300BATMAK300BAT4MAK300CARMAK80MAK9031MAK9032MAL6036MAL6050MAN30AMAN30CMAN400V160MAN400V320MAN400V448MAN401V160MAN401V320MAN401V448MAN404V160MAN404V320MAN404V448MAN408V160MAN408V320MAN408V448MAN40AMAN40CMAN410V250MAN410V350MAN412V250MAN412V350MAN414V250MAN414V350MAN60AMAN60CMANS501MANS503MAP101MAP101 BOLTMAP103MAP105MAP107MAP109MAP111MAP113MAP114MAP115MAP116MAP117MAP119MAP121MAP123MAP125MAP127MAP-A220MAP-A220MMAP-A320MAP-A320MMAP-B220MAP-B220MMAP-B320MAP-B320MMAP-BASEMAP-BASEMMAP-C220MAP-C220MMAP-C320MAP-C320MMAP-E220

Art.4442194219134134225225225225225225229229133133134134131131131131131131131131131131131131135135131131131131131131135135195195126126126126126126126126126126126126126126126126126126126126126127127127127126126127127127127127

PageMAP-E220MMAP-E320MAP-E320MMAP-F220MAP-F220MMAP-F320MAP-F320MMAP-G220MAP-G220MMAP-G320MAP-G320MMAQ40MAQ60MAT40MAT4314MAT4320MAT60MAT6314MAT6320MAT8314MAT8320MAUVQ40MAUVT40MAUVT60 MAW50MBLK180MBLK90MBLOK180LMBLOK90LMBOR001MBOR002MBOR003MBOR004MC161MD192MD193MD19525MD19535MD19550MD2025MD230MD25FLATMD3030MD3540AMD35FLATMD4035MDMAC52MDMACBORMDSCA38MDTP18MDTP23MDTS13MDV3814MDV3819MDV388MF007100MF007130MF007160MF008670MF02MF04MF05MF06MF06100MF06130MF06160MF09410MF09410C20MF09413MF09413C20MF09416MF09416C20MF09430MF10MF1000

Art.12712712712712712712712712712712713413413413413413313413413413421321321212202042425555555547555553535353535753525753125742545454505050170170170170171171171171170170170170171170171170171170171171

PageMF12MF127MF129MF1300MF1515MF1600MF2845MF2890MF300AMF300BMF300VMF350MF600AMF600BMF600HMF645AMF645BMF9812MFAC1000MFBOCMFCC11MFCC13MFCC15MFCC17MFCC20MFCC28MFV1012MFV68MFV810MGRAN1MGRAN11MGRAN12MGRAN15MGRAN2MGRAN22MGRAN3MGRAN4MGRAN41MGRAN42MGRAN43MGRAN44MGRAN45MGRAN451MGRAN46MGRAN47MGRAN5MGRAN55MGRAN7MGS21MGS23MGSR01MGSR03MGSR11MGSR13MGSR31MGSR33MHAS01MINIHINGE10MINIHINGE100MINIHINGE20MINIHINGE90MIR20MIR25MIR30MITSUBOR-38MN1620MN2020MN2030MN251200MN25300MN25400MN25500MN25800MN25850MNQ2470

Art.171170170171170171173173173173173170173173173173173170172171172172172172172172454545606060606060606060606060606060606060601414141413141313185192192192192184184185221129129135129129129129129129135

PageMNUV10057MNUV12062MNUV6540MONCH16MORS001MORS002MORS0023MORS003MORS004MORS005MORS033MORTGIR1MORTGIR5MP100MP4000MPB110MPB111MPB121MPB122MPB123MPB1930MPCMOMPCPMQ504-AISI304MQ504-AISI316MQ508-AISI304MQ508-AISI316MQ602-AISI316MQ60490-316MQ606LIN-316MQ702-AISI316MQ70490-316MQ706LIN-316MR181MR185MR186MR188MREC003DXMREC003SXMREC004DXMREC004SXMREC005DXMREC005SXMREC006DXMREC006SXMRET001MRET002MRET0023MRET0027MRET003MRET004MRET005MRET006MRET007MRET008MRET009DXMRET009SXMRET010DXMRET010SXMRET011DXMRET011SXMRV16MRV25EMS1207MS1208MS1250MSC5MSC6MSC7MSC8MSC9MT001MT016MT021MT031

Art.2122122121216516516516516616616647472282285656565656562282281212121213131313131319819819819843434343434343434444444443434343434444444444444419819814141413213213213213546464646

PageMT041MT04122MT050MT051MT061MT071MTD3000MTD3000KRMTET216MTET21615MTET316MTET31615MTS10MTS3000MTS3000KRMTS90MU30095MU30095NMU301012MU30135MU30135NMU3068MU30810MU451012MU4568MU45810MU701012MU7068MU70810MVAC3041MVAC3044MVAC3048MVIT0110MVIT0111MVIT012MVIT013MVIT014MVIT015MVIT016MVIT017MVIT018MVIT019MVIT022MVIT023MVIT024MVIT025MVIT026MVIT027MVIT028MVIT029MVIT031MVIT032MVIT033MVIT034MVIT035MVIT036MVIT037MVIT041MVIT042MVIT043MVIT044MVIT045MVIT046MVIT047MVIT048MVIT0510MVIT0511MVIT0512MVIT0513MVIT052MVIT053MVIT054MVIT055MVIT056MVIT057

Art.464647474747184179198198197197184184179184481734848173484848484848484860606057585758585757575857585858585858585858585858585858585959595959585859595959595959595959

Page

ANALYTICAL INDEX

Page 248

MVIT061MVIT0610MVIT063MVIT065MVIT067MVIT068MVIT069MVITCE1MVITCE10MVITCE11MVITCE12MVITCE13MVITCE14MVITCE15MVITCE16MVITCE17MVITCE18MVITCE19MVITCE2MVITCE20MVITCE21MVITCE22MVITCE23MVITCE24MVITCE25MVITCE26MVITCE27MVITCE28MVITCE29MVITCE3MVITCE30MVITCE31MVITCE32MVITCE33MVITCE4MVITCE41MVITCE42MVITCE43MVITCE5MVITCE6MVITCE61MVITCE7MVITCE71MVITCE81MVITCE9N2AF57N2AF59N2AF60N2AF64N2AF65N2AF67N2AF69N2AF691N2AF692N2AF693N2AF694N2AF70N2AF71N2AF72N2AF73N2AF74N2AF75N2AF76N2AF77NCH00NCH01NCH03NCH05NCH062NCH07NCH09NCH10NCH12NCH14NCH16

Art.575757575757575151515151515151515151515151515151515151515151515151515151515151515151515151231231231231231231231231231231232232232232232232232232232231231231231231231231231231231231

PageNCH17NCH19NCH21NCH23NCH25NCSG01NCSG03NCSG05NCSG07NCSG09NCSG11NCSG13NCSG15NCSG17NCSG19NCSG21NCSG23NCSG25NCSG27NCSG29NCSG31NCW26NCW27NCW28NCW29NCW34NCW39NCW41NCW43NCW44NCW49NCW50NCW51NCW52NCW53NCW54NCW55NCW56NDSG03NDSG05NDSG07NDSG13NDSG15NDSG17NDSG19NMET001NMET002NMETS5NMETS7NMETS8NMF2208NMF2210NMF2212NMF3008NMF3010NMF3012NMF4508NMF4510NMF4512NMF7008NMF7010NMF7012NML10NML12NML14NML16NMLKIT18NMS001NMS002NMS003NMS004NMS005NMS006NMS007NMS008

Art.231231231231231230230230230230230230230230230230230230230230230231231231231231231231231231231231231231231231231231229229229229229229229233233233233233484848484848474747474747233233233233233200200200200200200200200

PageNMS14NMS15NMS16NMS35NMS40NMS45NMS50NMS75NRM104NRM1221NRM1222NRM131NRM1424NRM1425NRM1432NRM1433NRM1550NRM18100NRM18200NRM18300NRM1840NRM1850NRM18600NRM18700NRM18800NRM2002NRM222NRM24NRM26NRM29NRM3000NRM3040NRM3050NRM3060NRM3200NRM4000NRM532NRM540NRM60NRM740NRM8010NRM8040NRM9035NRM9050NRM9100NRMKA111NRMKA125NSG01VNSG03NNSG05RNSG07GNSG09BNSG11BLUNSGST01NSGST03NSGST05NSGST07NSGST09NSSG01NSSG03NSSG05NSSG07NSSG09NSSG11NSSG13NSSG15NSSG17NSSG19NSSG21NSSG23NSSG25NSSG27NSSG29NSSG31NSSG33

Art.199199200199199199199199203203203203205205203203204204203202205205204204204204202205205205202205205204203202204205204203205202204205204203203229229229229229229228228228228228229229229229229229229229229229230230230230230230230

PageNSSG35NSSG37NSSG39NSSG41NSSG43NSSG45NSSG47NSSG49NSSG51NSSG53NSSG55NSSG57NSU001NSU002NSU004NSU005NSU006NSU007NV3100NV3100KRNV3200NV3300NV3300KRNV3400DXNV3400SXNV3500NV3500KRNV3600NV3CZNV3CZKRNV3DXNV3DXKRNV3SXNV3SXKROIL31301OIL313025OIL31305OIL31321OIL313225OIL31325OIL31331OIL313325OIL31335OSS95PALM001PAR001PAR002PAR003PAR004PATA46PATA810PB174PBCAL10PBD3183PBD3183.220PBD3184PBD3184,100PBD3184,150PBD3184KRPBD3185PBD3185.150PBD3185KRPBDTPPD001PD002PD003PD100D03PD100D07PD100D11PD100D15PD100D19PD100D23PD100S01PD100S05PD100S09

Art.2302302302302302302302302302302302302302302302302302301501501501501501501501501501511491491491491491492222222222222222222222222222322352132132132135656501491401401401401401507575150140292936303030303030303030

PagePD100S13PD100S17PD100S21PD12PD12250PD300D04PD300D08PD300D12PD300D16PD300D20PD300D24PD300S02PD300S06PD300S10PD300S14PD300S18PD300S22PD8PD8300PD8APD8A160PDKIT01PDKIT02PDKIT03PDKIT04PDKIT05PDKIT06PDKIT07PDKIT08PDKIT09PDKIT10PDKIT100PDKIT11PDKIT12PDKIT13PDKIT14PDKIT15PDKIT16PDKIT300PDMUR66PEL31PEN10PEN15PEN20PEN30PENCHPENGRYPENKIT10PENKIT15PENKIT20PENKIT30PENT01PENT03PENT05PENTAGLIOPF134PFDOOR66PFDOOR6615PFDOOR6630PFDOOR810PFDOOR81015PFDOOR81030PFDOORCUTPG03PG05PH2784PH2790PH2792PH2818PH2819PH2826PH2827PH2828PH2829PH50508

Art.303030292930303131313130303031313137372929313131313131313131313031313131313130291832121212122212121212122222222502929292929292914214238383838383838383838

Page

ANALYTICAL INDEX

Page 249

PH50510PH50511PH50512PH9113PH9117PH9121PHC3246PIEDACC20PIEDUV25PIEDUV32PIEDUV35PIEDUV50PINZ001PINZ002PINZ006PINZ30PINZ33PINZ35PINZJAWPIVAN01PIVAN04PIVAN05PIVAN08PIVOTB002PIVOTB004PIVOTB006PIVOTB008PIVOTB010PIVOTS001PIVOTS003PIVOTS005PIVOTS007PIVOTS009PIVOTS011PIVOTS014PM1PM2PM3PM4PMAN1131PMAN1322PMAN1332PMAN1340PMAN1375PMAN1530PMAN90POM01POM02POM03POM04POM10POM18150POM18170POM1ACC20POM1ACC25POM2525POM4535POM45PTPOM45SPOM45TPOM6POM65BTPOM65SPOM65SCPOM65TPOM65TCPOM75POM8POM90540TPOM90555TPOMBD40BTPOMBD40SPOMBD40SCPOMBD40TPOMBD40TC

Art.383838383838129215215215215215225225225225225225225120120120120107107107107107107107107107107107106130130130130129130130130130130129136136136136135136136135135137136136137137135137137137137137137123137137137138138137138

PagePOMPVCPOMUV11POMUV15POMUV16POMUV17POMUV3POMUV9POMVE20SPOMVE20TPOMVE25SPOMVE25SCPOMVE25TPOMVE25TCPOMVE30SPOMVE30TPOOL50CPOOL50SQPQ95PROALUX1520PROALUX1530PROALUX1720PROALUX1730PROALUX1920PROALUX1930PROALUXGPROALUXG400PROFALL0820PROFALL0820KRPROFALL1020PROFALL1020KRPROFALL1225PROFALL1225KRPROFALL1240PROFALL1425PROFALL1440PROFIX1630PROFIX1630KRPROFIX1660PROFIX1830PROFIX1860PROFIX2130PROFIX2130KRPROFIX2160PROFIX2230PROFIX2260PROFIX2430PROFIX2460PROFIX2530PROFIX2560PROFIX3030PROFIX3060PROFIX4125PROFIX4272PROFIXGPROFIXG080PROFIXT30PROFIXTP18PROFIXTP22PROFIXTP25PROFIXTPUPROFIXTPU810PROFIXTPUKRPROG28PROG30PROTAP0820PROTAP0820KRPROTAP1020PROTAP1020KRPROTAP1225PROTAP1225KRPROTAP1240PROTAP1425PROTAP1440PROTAP1520PROTAP1530

Art.136212212212212212212138138138138138138138138191914235353535353536363417934179341793434343217932333332179323333333333333333323234343234343432331792332333417935179351793535353535

PagePROTAP1720PROTAP1730PROTAP1920PROTAP1930PT105110PTBH1964PTUP2261-DXPTUP2261-SXPTUP26PTUP30PTUPSQ2016PTUPSQ2018PTUPSQ2036PTUPSQ2038PTUPSQ2056PTUPSQ2058PTUPSQ2066PTUPSQ2068PTUPSQ2076PTUPSQ2078PTUPSQ2086PTUPSQ2088PTUPSQ2096PTUPSQ2098PTUPSQANGPTUPSQDPUN001PUN002PUN20PUN30PV013000PV014200PV053000PV054200PVTBPVTSPW-UPR7150R7166R7166FOROR7170R7170FOROREG001NREG001TREG002NREG002TREG003NREG003TREG116REG120REG150REG520REG540REGA15REGA20REGASTA150REGASTA200REGDUOREGECC20REGTER08REGTER10REGTER12REGTP08REGTP08APREGTP08VITREGTP10REGTP10APREGTP10VITREGTP12REGTP12APREGTP12VITREGUV44REV140BDXREV140BSXREV160BDX

Art.3535363614216916916916916916816816816816816816816816816816816816916916916922822822822818818718818813132393838383838198198198198198198190190190199199211211202202199211200200200201201201201201201201201201211106106106

PageREV160BSXRIGA001RMA1319RMA1373RMA1382RMA1390ROT02ROT02DRUOT100005RUOT114010RUOT115011RUOT125018RUOTA36RUOTA40RUOTA70ARUOTA70CRUOTA98003RUOTA99004S1180S1201S1201DS1201PS1203S1203DS1203PS1205KS1207KS1209S1211S1213S1215S1217US1219S1221S1223S1227S1228S1229S1231S150S153S16002S16002DS16002PS16004S16004DS16004PS16006S17501S17501DS17501PS17505S190S19515S19515DS19515PS4001S4003S4005S4007S4009S4011S4013S4015S4020S4500S4503S4505RS4506LS600S603S6180S690SABB1SABB2

Art.106224383838382828215215215215215215215215215215162122122122121121121121121122122122122108122122122116116116116162162121121121121121121121120120120120162120120120163163163163163163163163163163163163163162162163163232232

PageSABB3SABB4SALVSP1220SALVSP410SAS001SAS003SAS004SAS005SAS006SAS007SAS008SAS009SAS020SAS1000SAS1300SB148SB200KSB40DRSB48DRSB-BORKSCR001SEA46SER001DSER001USER002SER004DSER004USER006SER007SER011DSER011USER012USER013DSER013USER015USER016SER017USER019DSER019USER020DSER020USER021SER022USER024DSER024USER026DSER026USER23DXSER23SXSER690DSER690USER71G1DSER71G1USER76G4DSER76G4USER810SEREGG10DSEREGG10USEREGG13DSEREGG13USEREGG15DSEREGG15USERF1SERF2SERF3SERH01SERH03SERH05SERH07SERH09SERH11SERH13SERH15SERH17SERKYR28

Art.2322322382381721721721721721721721721711721721010101011167211196196190190190190190196196196196196197197197196196196196196196197197197197190190196196197197197197197210210210210210210196196196122122122122122122122122122197

Page

ANALYTICAL INDEX

Page 250

SERKYR29SERKYR30SERKYR31SERLT12SERMAX20DSERMAX20D SERMAX20USERMAXDSERMAXUSERMF13SERMF15SERMFGL1SERMG10PSERMG10SSERMG10SUSERMG12SERMG19SERMGC1SERMGM10PSERMGM10SSERMGM10SUSERMYC1SERMYC300SERMYC308SERMYC310SERMYC312SERMYLSERMYMPSERMYMSSERMYMSUSERMYPSERMYSSERMYSUSEROYCSEROYPSEROYSSEROYSDSERS401SERS403SERS405SERS407SERSD610PSERSD610SSERSD610SUSERSD620SERSD915PSERSD915SSERSD915SUSERSD941SERUV100DSERUV100USERUV150DSERUV150USERUV40DSERUV40LGDSERUV40LGUSERUV40USERUV41DSERUV41USERUVS01SERUVS03SERUVS05SERUVS07SFE001SSFE001TSFE002SSFE002TSFE003SSFE003TSFE004SSFE004TSFE005SSFE005TSFH100SFH101

Art.197190190196194194194194194123123123102102102102102102102102102116116116116116115116116116115115115123123123123195195195195101101101101103103103103210210210210210210210210211211209209209209213213213213213213213213213213166167

PageSFH102SFH103SFH801SFH802SFH803SGS15LSGS17LSGS2115DSGS2115USGS2117DSGS2117USGS2121DSGS2121USGS21LSGS2315MDSGS2315MUSGS2317MDSGS2317MUSGS2321MDSGS2321MUSGS2715MSGS2717MSGS2721MSOFTUV10SOFTUV18SP01SP03SP051SP2201SP2202SP2203SP2204SP2205SP2206SP220L01SP220L02SP220L03SP220L04SP220ZSP220Z04SP2255SP255SP60ALL12SP60ALL15SP60ALL16SP60ALL20SPC1000SPC415SPC419SPC420SPC501SPC503SPC507SPC509SPD01SPD03SPD05SPD071000SPD072000SPD092300SPD112300SPD132300SPD153308SPD153310SPD153508SPD153510SPE2392SPE2393SPE2394SPE2395SPE2397SPE2402SPE2403SPE2404SPE2405

Art.1671671661661661061061061061061061061061061061061061061061061061061062112112828282727272727272727272728281361362828282827414141123123123123173173173173173173174174174174174174239239239239184239239239239

PageSPE2407SPE2502SPE2503SPE2504SPE2505SPE2507SPE2602SPE2603SPE2604SPE2605SPE2607SPE2702SPE2703SPE2704SPE2705SPE2707SPE2802SPE2803SPE2804SPE2805SPE2807SPECQUA1SPECQUA2SPECQUA3SPECTOND1SPECTOND2SPECTOND3SPECTOND4SPEK138SPEK141SPEK180SPEK215SPH100SPH102SPH104SPH106SPH108SPH110SPH112SPH114SPH2SPL11SPL13SPV1000SPVS4002SPVS4008SQ002SQ003SQ004SQ005SQ006SQ007 SQHB1050SQHB1250SQHB1500SQHB1750SQHB2100SQHB600SQHB800SQHD1050SQHD1250SQHD1500SQHD1750SQHD400SQHD600SQHD800SQTECCSQTS400SQTS600SQTS860SQTSUPSQTV2000SQTV2500SQTV3000SQTV3500

Art.239239239239239239239239239239239239239239239239239239239239239185185185185185185185185185185185393939393939393912312012027239239224224224224224224224224224224224224224224224224224224224224224225225225224224224224224

PageSQTVVS400SR118SR119SR1220SR1220DSR1220PSR1224SRC118SRS1180DSRS1180PSRS1180UST4151ST4411ST4421STL05STL07STOPVAPOR0STOPVAPOR05STOPVAPOR1STOPVAPOR12STOPVAPOR13STOPVAPOR15STOPVAPOR17STOPVAPOR19STOPVAPOR2STOPVAPOR3STOPVAPOR4STPDXSTPSXSTR10STR12STR14STR16STR18STR8SUPGR01SUPGR03SUPP001SUV90ISUVREGHSVL14SVL2SVL7SVL70SVV1SVV16SVV5SVV72SX-BT903SX-BTKITSX-BTUP1SX-BTUP3SX-BTUP5SX-BTUP7SX-JL903SX-JL903PMRSX-JL904SX-JL905SX-JLCER1SX-JLCER3SX-JLCER5SX-JS1053DESX-JS1053FRSX-JS1053ITSX-JS1054DESX-JS1054FRSX-JS1054ITSX-JS903DESX-JS903FRSX-JS903ITSX-JS903PMRDESX-JS903PMRFRSX-JS903PMRITSX-JS904DESX-JS904FR

Art.22411711611611611611611711711711721421421412112118318318318318318318318318318318365652727272727274242238220220191191191191191191191191114114114114114114113113113113113113113112112112112112112112112112112112112112112

PageSX-JS904ITSX-JS905DESX-JS905FRSX-JS905ITSX-MS903DESX-MS903FRSX-MS904DESX-MS904FRSX-PI01SX-PI03SX-PI05SX-PS01TAG003TAG004TAG007TAG013TAG016TAG1200TAG1500TAG1800TAG2100TAG600TAG900TAG-H28TAG-PTTAG-S1519TAG-T612TAG-TKTAL13046TAL1404MDTAL14060TAL15078TAL15098TAL15120TALCTALCP4TALCRDTALCROVITALCSATALCSDATALCSMTALCSROVITALRO12030TALRO3011TALRO3013TALRO4013TALRO4114TALRO4514TALRO5013TALRO5015TALRO5614TALRO5815TALRO6015TALRO6016TASA1820TASA1830TASB120TASB130TASR20TASR30TASS006TASS007TASS008TASS009TASS010TCC-H28TCC-S1519TCC-T612TESA15TESA20TESA25TESA30TESA50TPC04TPC06

Art.112112112112112112112112113113113113221221221221221222222222222222222222222222222222221221221221221221221221221221221221221221221221221221221221221221221221221221238238238238238238238238238238238222222222236236236236236238238

Page

ANALYTICAL INDEX

Page 251

TPC10TS100TS25006TS25009TS25012TS25015UDF-7283ME03UDF-7283ME04UDF-7283ME05UDF-7283ME06UDF-7283ME07UDF-7283ME08UDF-7283ME09UDF-7283ME10UDF7283ME100UDF-7283ME11UDF-7283ME12UDF-7283ME13UDF-7283ME14UDF-7283ME15UDF-7283ME16UDF-7283ME17UDF-7283ME18UDF-7283ME19UDF-7283ME20UDF-7283ME21UDF-7283ME22UDF-7283ME23UDF-7283ME24UDF-7283ME25UDF-7283ME26UDF-7283ME27UDF-7283ME28UDF-7283ME29UDF-7283ME30UDF-7283ME31UDF-7283ME32UDF-7283ME33UDF-7283ME34UDF-7283ME35UDF-7283ME36UDF-7283ME37UDF-7283ME38UDF-7283ME39UDF-7283ME40UDF-7283ME41UDF-7283ME42UDF-7283ME43UDF-7283ME44UDF-7283ME45UDF-7283ME46UDF-7283ME47UDF-7283ME48UDF-7283ME49UDF-7283ME50UDF-7283ME55UDF-7283ME60UDF-7283ME65UDF-7283ME70UDF-7283ME75UDF-7283ME80UDF-7283ME85UDF-7283ME90UDF-FHUDFMARK80UDFORSVUDFORSV1UDFORSV2UDFS1UDFS10UDFS12UDFS14UDFS16UDFS2UDFS4

Art.238235235235235235226226226226226226226226227226226226226226226226226226226226226226226226226226226226226226226226226226226226226226226226226226226226226226227227227227227227227227227227227227225227227227227227228228228227227

PageUDFS6UDFS8UDFX012UDFX013UDFX014UDFX015UDFX017UDFX018UDFX020UDFX021UDFX022UDFX023UDSV05UDSV06UDSV07UT200UT250UT300UT400UTC200RUTC250RUTC300RUTR65V90ERV90IV90IRVECCVEN004VEN006VEN0065VEN0068VEN009VEN204VEN244VENCIL15VENCIL20VENPAL20VENPAL25VENPAL30VETCIL35VETDISC20VETDISC30VETPOM13325SVETPOM13325TVETPOM13328SVETPOM13328TVETPOM13330SVETPOM13330TVETPOM13340SVETPOM13340TVITC256VITC258VITC30825VITC30830VITC40825VITC40830VITC50830VITC50835VP15VP20VP8VT01VT03VT110VT180VT35VT68W.605.020.250W.605.020.500W.605.040.250W.605.040.500W.605.050W.605.071W.605.090.250W.605.090.500

Art.22722722722722722722722722722722722722722722761616161616161342202202202202342342342342342342342372372372372371362122121381381381381381381381385959595959595959234234234234234234234234234186186186186186186186186

PageW.606.100.250W.606.100.500W.606.110.250W.606.110.500W.606.120.250W.606.120.500W.606.220.250W.606.220.500W.606.290.250W.606.290.500W.606.310W.606.320W.606.350.250W.606.350.500W.606.360.250W.606.360.500W.606.400W.606.420W.606.450W.606.600W.606.620DW.606.620UW.606.640W.610.020.250W.610.020.500W.610.040.250W.610.040.500W.610.050W.610.070W.610.090.250W.610.090.500W.610.320W.610.370.250W.610.370.500W.610.400W.610.420W.610.450W.610.600W.610.620DW.610.620UW61250W61500W61TDXW61TSXW63250W63500W63TDXW63TSXYC300YC308YC310YC312ZATTZMMS1400ZMMS1400UZMT/AZMT1400ZMT2000ZMT400ZMT500ZMT800ZPI/AZPI500ZPI800ZQUA/AZQUA1400ZQUA500ZQUA800ZSIP/AZSIP500ZSIP800ZSIQ/AZSIQ1400ZSIQ500ZSIQ800

Art.186186186186186186186186186186186186186186186186186186186186186186186187187187187187187187187187187187187187187187187187184184184184184184184184116116116116128128128128128128128128128128128128128128128128128128128128128128128

PageZSIT/AZSIT1400ZSIT2000ZSIT400ZSIT500ZSIT800ZSS1400ZSS1400UZUV

Art.128128128128128128128128128

Page

GENERAL SALES CONDITIONS LOGLI MASSIMO S.p.A

Page 252

Art. 1 – Subject 1.1 Unless otherwise agreed between the parties, the following general sales conditions apply to all the agreements between the company Logli Massimo S.p.A. (hereafter shortly “LM” and/or the “Supplier”) and each customer (hereafter shortly “Customers” and individually, “Customer”) concerning the supply of products manufactured and/or put on the market from Logli Massimo S.p.A. (hereafter shortly “Goods”), unless otherwise agreed in writing between the parties. 1.2 Therefore, supply conditions in derogation from these General Terms will have no effectiveness, if not resulting from expressed written agreement, subscribed between the parties.

Art. 2 - Supply orders and conclusion of the Agreement 2.1 Catalogues, technical and promotional information sent by the Supplier and/or by sales managers to Customers do not represent any contractual offer. 2.2 The order of the Customer will be considered sent to the Supplier when it is received from the Commercial office by fax, e-mail, postal service, and/or courier. 2.3 In accordance with these Sales conditions, the supply agreement is deemed to be concluded when LM, after receiving the order from the properly subscribed customer, will give him confirmation through the dispatch of the specific document (Order Confirmation, hereafter shortly “OC”) and/ or through the execution of the supply. Only the customer orders that have been sent and confirmed in writing by LM in accordance with the procedure in 2.3 above, will be valid and binding for LM. 2.4 Any eventual Customer request for order modification must be received before the order confirmation by LM and/or by sending the LM OC.

Art. 3 - Prices 3.1 Unless otherwise agreed between the parties, supply prices are valid for goods delivered ex works and they not include the costs associated with insurance, transport, nor other performances and accessory charges. 3.2 The prices are to be considered as not including VAT, taxes, or duties of what-ever type which may apply to the contract. 3.3 Unless otherwise agreed between the parties, prices are related to Logli Massimo S.p.A. price list in force at the time of ordering.

Art. 4 – Technical features of products 4.1 Technical features of supplied products are in compliance with those specified in LM catalogues which are available on website www.loglimassimo.it. 4.2 At any time and without prior notification, LM reserves the right to make changes to products that are necessary for production, normative reason etc. informing its Customers. 4.3 It is understood that any changes that LM considers necessary to make to the products will not obliged to modify and/or replace the Products sent to the Customer and/or in the course of shipping.

Art. 5 – Terms and methods of delivery 5.1 Unless otherwise provided in written agreement between the parties, delivery terms are to be considered indicative and not essential. 5.2 Unless otherwise provided in written agreement, for the purpose of ascertaining compliance with delivery periods and the possible transfer of risk to the customer, the delivery shall be deemed fulfilled when the Goods are made available to the customer at LM factory. 5.3 Under no circumstance the failure to comply with delivery terms authorizes the Customer to cancel the order, change the payment terms, make any kind of compensation with receivables towards the Supplier and / or apply penalties. The penalties must be expressly agreed in writing between the parties. 5.4 LM will in any case be released from any responsibility for delays in delivery in the following cases: - in case of delivery to the factory, site and/or construction site of the Customer expressly agreed in writing between the parties, if the necessary indications to organize the delivery have not been received by LM in accordance with the methods and terms required;

- in case of force majeure or other serious and unpredictable events similar to force majeure, such as: strikes, boycotts, lockouts, epidemics, wars, revolutions, riots, fires, floods, earthquakes and other natural disasters, interruptions or delays in transport, trade sanctions, interruption of energy, delays in deliveries of raw materials and/or any other reason that causes a partial or total block of production. 5.5 If, for any reason not attributable to LM, the delivery of Goods can not take place on the agreed date, the delivery is understood to be carried out for all purposes (including the transfer of risk to the Customer) communicating to the Customer that the goods are ready. If the period of stay of Goods exceeds 5 (five) calendar days, LM reserves the right to charge the Customer the storage costs, determined in € 150.00 (one hundred and fifty / 00) for each day of delay starting from the first day of storage. 5.6 The standard packaging of Goods, suitable to ensure their integrity during transport and unloading and storage under normal conditions, are included in the price. Any special packaging must, however, be preliminarily agreed in writing and the related costs will be invoiced to the Customer. 5.7 If the packages are to be returned, the transport cost (from the Customer to LM), will be charged to the Customer, unless otherwise agreed in writing between the parties.

Art. 6 – Product Warranty 6.1 Unless otherwise agreed in written agreement between the Parties, the Seller ensures conformity of the Products with their specifics for 12 (twelve) months from delivery time. It is understood that it is up to the Customer to verify that the Goods supplied allow the use in accordance with their needs and expectations, also taking into account the other components used. 6.2 Any claim for apparent defect of the Products must be contested by the Customer upon delivery and be reported in writing to LM immediately, under penalty of expiration, no later than 8 (eight) calendar days from the date of delivery. By apparent defect must be understood any visibly identifiable defect at the time of receipt of the Goods, including any claims related to the packaging and to differences in the quantity and / or quality of the delivered Goods. In cases of complaint, to facilitate the control of the delivered Goods, these must be made available to LM, in the persons of its representatives and / or officers. 6.3 Any complaint different from the ones considered at paragraph 6.2 concerning faults and / or malfunctions, must be immediately reported by the Customer, in writing, to LM and under penalty of expiration, within 10 (ten) calendar days from the identification, in order to allow their verification if the parties don’t agree, and, where necessary, in the workshop indicated by LM. 6.4 If the responsibility of the manufacturer is ascertained, LM undertakes to carry out all the necessary activities for the restoration of conformity of the Goods, by repairing and eliminating faults and / or defects, providing, where necessary, to replace them. In this case, the relative transport costs will be paid by LM. The compensation of any further direct or indirect damages suffered by the customer is expressly excluded. 6.5 Any warranty and therefore any responsibility of LM is excluded in the event of: a) fraud, improper use, negligence and/or incompetence on the part of the Customer, of the final recipient of the Goods and / or of the person in charge of the installation or use of the same; b) use of the Goods on materials and / or for applications different from those recommended, imperfect installation and / or different from the provisions of the Goods specifications; c) acceptance tests carried out under conditions of inaccessibility or unsuitability to the Product test. d) wrong and / or absent execution of the periodic maintenance operations related to the type of material of the items purchased for common use. To this purpose the customer and / or the final recipient of the Good are required to comply with and follow the instructions for maintenance and the correct use of the Goods, together with other technical provisions provided by LM (e.g.: frequent cleaning with hot water and non-aggressive products, periodic checking from deterioration etc.) The maintenance instructions generally do not apply to all items. In case of doubt, please contact LM. 6.6 The warranty is also excluded if the lack of functionality of the Goods is attributed to such conditions:

GENERAL SALES CONDITIONS LOGLI MASSIMO S.p.A

Page 253

a) operating conditions that exceed the limits of the correct functioning of the Good; b) deterioration of finishes due to incorrect handling, installation or maintenance; c) normal wear of the Good during the application (e.g. gaskets, chrome etc.); d) lack of maintenance of the Good and / or lack of replace the materials subject to wear. 6.7 LM declines any responsibility in case of lack of intervention due to force majeure, including: strikes, boycotts, lockouts, epidemics, wars, revolutions, riots, fires, floods, earthquakes or natural disasters, trade sanctions, interruption of energy or other reasons attributable to the Customer or the final recipient.

Art. 7 – Terms and methods of payment 7.1 Unless otherwise agreed in writing between the parties, the Invoice payment of the Customer related to the Product supply must be made, in favor of the Supplier, according to the procedures agreed between the sales manager and approved by the Administration during the Customer registration. 7.2 In case of delay in payments the Customer will be obliged to pay LM an interest on arrears equal to the interest rate of the European Central Bank increased by 7 percentage points, as defined by Art. 5 of Legislative Decree 231/2002. 7.3 In case of any disagreements and / or disputes of any kind, the Customer can’t suspend or delay the payment of the Goods, object of the claim or of the dispute, nor to delay the payment of any further credits claimed by LM, or to operate no compensation. 7.4 If LM has reason to believe that the Customer, due to changes in its legal or financial situation, can not or does not intend to fulfill its payment obligation on the agreed time, reserves the right at any time, even in case of partial execution of the supply, to suspend deliveries, subordinating their continuation and / or balance to the issue of suitable guarantees of payment by the Customer (e.g. bank guarantee).

Art. 8 – Customer’s obligation in relation to export controls and financial penalties The Customer is obliged not to make any transaction concerning Goods that violates the regulations in force in the United States and / or European Union regarding export controls and financial sanctions. In particular, it undertakes not proceed with resale, export or transfer of the Goods to natural or legal persons subjected to the aforementioned regulation and guarantees that the Goods will not be used, neither directly nor indirectly in military, nuclear, petroleum or petrochemical industry. In cases of possible violations from the Customer of one or more of the aforementioned obligations, LM may consider terminated the contract, as defined by Art. 1456 in the Civil Code.

Art. 9 – Confidentiality The Customer undertakes to process all information, news, know-how, intellectual property rights and other industrial secrets related to the execution of supply orders with strict confidentiality and not to transfer, use, reproduce, disclose or make however available or accessible to third parties, information, documents, drawings, drafts, models, samples, and other materials without the express written authorization of LM. Information on the processing of personal data As defined by Art. 13 of EU Regulation 679/2016 (hereafter GDPR) the Customer acknowledges and accepts what follows: The commercial relationships with the Supplier will involve the processing of Customer Personal Data in compliance with the following general principles: i) all Personal Data will be processed in a lawful, correct and transparent way towards the interested party, in compliance with the general principles established by Art. 5 of the GDPR; ii) specific security measures will be observed to prevent data loss, illicit or incorrect use and unauthorized access; The Supplier assumes the title of the Data Processor treated. The Customer’s Personal Data will be the Customer Identification Data (name, surname, registered company name, personal / fiscal data, address,

telephone, e-mail, bank and payment details) acquired and used into the sphere of the services provided by the Owner and therefore necessary for the execution of contractual relationship between the Customer and the Supplier. Personal Data will be processed by means of operations indicated in the Article 4 n.2) GDPR and precisely: collection, registration, organization, storage, consultation, processing, modification, selection, extraction, comparison, use, interconnection, blocking, communication, cancellation and destruction of data. The Customer’s Personal Data will be processed either on paper or electronically (computerized or telematics) and / or automated and saved in a paper archive and in a dedicated server located in Europe. The Owner will process personal data for the time necessary to fulfill the purposes for which it was collected and related legal obligations. The Owner of the treatment is a legal entity belonging to a group of companies (the Saint-Gobain group, hereafter also “the Group”), in case the Owner intends to transfer his data to entities belonging to the Group, this will happen in compliance with the provisions of Art. 47 of EU Regulation 679/2016 (“Binding Corporate Rules”).

CONTACT DATA OF DATA PROTECTION MANAGER Data Protection Officer (“DPO”) of Saint-Gobain Group for Italy and Greece Via Ettore Romagnoli, n. 6 I – 20146 Milan Mail : [email protected]

Art. 10 – Applicable law All contracts between the Supplier and the Customer concerning the supply of Goods, in accordance with these General Sales Conditions are subject to the Italian rules.

Art. 11 – Competent court Any disagreement arising from the application, execution, interpretation and / or resolution of each contract concerning the supply of Goods in accordance with these General Sales Conditions will be devolved to the exclusive jurisdiction of the Court of Milan.

Art. 12 – Final clause 12.1 The invalidity of one of the clauses of these General Sales Condition does not compromise the application of the other clauses that will maintain, therefore, their validity and effectiveness. 12.2 Eventual tolerance Possible tolerances by the Supplier to behaviors that violate any of the clauses of these General Conditions of Supply, does not imply, in any case, the renunciation to use this clause, as of any other included in the same clauses.

NOTES

Page 254

NOTES

Page 255

© Logli Massimo SpA

Graphic designC&B pubblicità

PhotographySimone Burchi

Printed byIndustrie Grafi che Pacini SRL

The images and data contained in this catalogue are indicativeand are subject to change, even without prior notice

ASSOCIATED PARTNERS

Fornitore Ufficiale

SPONSOR

LOGLI MASSIMO SpA Via Chemnitz, 49/51 59100

Prato - Italia Tel. +39.0574.848111

Fax +39.0574.527574

www.loglimassimo.it

[email protected]@saint-gobain.com

PRIC

E LI

ST 2

02

1

PRICE LIST 2021

EN