New products November 2021 - ENG - Osculati

ai163463465015_II_Cop_adv-nemo_ENG.pdf 1 19/10/2021 11:10:55

OSC

ULATI Selection

OSCULATI Selection 2021

_2021_fascicolo_METS_ENG_pag_1_a_32_NO_29.mif Page 1 Thursday, October 28, 2021 8:42 AM

P

▶ Nemo navigation lights up to 20 m, RINA type-tested

1

1.47

0.01

/01B

U

11.

470.

01/0

1BU

1

1.47

0.04

/04B

U

Nemo LED navigation lights for vertical mounting

LED AISI 316

Black polycarbonate body and mirror-polished AISI316 stainless steel case. Easy to install on both the hull and the deck.RINA type-approved in compliance with the COLREG72 regulations. For vessels up to 20 metres with visibility not exceeding 2NM.Available in packages for retail sale or wholesale.

Lights | Type-tested lights | Certified lights |

Retail Bulk6 pcs/pair

Content Light colour Visibility NM

V W

11.470.01 11.470.01BU Pair of lights + 112,5° left + 112,5° right 2 12 0.4+0.4

11.470.04* 11.470.04BU* Single light 135° stern 2 12 0.4

* Available as of January 2022

11.470.01/01BU 11.470.04/04BU

Nemo LED navigation lights for recess mounting

LED AISI 316

Black polycarbonate body and mirror-polished AISI316 stainless steel case. Easy to install on both the hull and the deck.RINA type-approved in compliance with the COLREG72 regulations. For vessels up to 20 metres with visibility not exceeding 2NM.Available in packages for retail sale or wholesale.


Retail Bulk6 pais


V W

11.473.01 11.473.01BU Couple of lights + 112,5° left + 112,5° right 2 12 0.4+0.4

Available as of January 2022

1

1.48

0.01

/01B

U

11.

480.

01/0

1BU

1

1.48

0.03

/03B

U

1

1.48

0.05

/05B

U

Nemo LED navigation lights for horizontal mounting

LED AISI 316

Black PVC body and mirror-polished AISI316 stainless steel case. Easy to install on both the hull and the deck.RINA type-approved in compliance with the COLREG72 regulations. For vessels up to 20 metres with visibility not exceeding 2NM.Available in packages for retail sale or wholesale.


Retail Bulk6 pcs/pair


V W

11.480.01 11.480.01BU Couple of lights + 112,5° left + 112,5° right 2 12 0.4+0.4

11.480.03 11.480.03BU Single light 225° stern 3 12 0.4

11.480.05 11.480.05BU Single light 112,5° + 112,5° bicolour 2 12 0.4


For the correct orientation of the light sector, it is recommended to mount them on a surface angled at 22° to the bow axis.

1

OSC

ULA

TI S

elec

tion

2

OSCULATI Selection2021


01.120.10 01.121.10

Bow roller + Trefoil® anchor with anti-water plate

AISI 316 Bow roller fitted with an anchor having a coupling plate that closes perfectly thehole on the hull.This system makes the plate strike against the roller preventing water from leakinginto the forepeak.The roller is designed to match the Trefoil anchor for a combination of high-levelproducts in style and performance.The system is easily installed by means of 4 screws hidden in the roller and is fittedwith two sheaves for smooth sliding of the chain.Made from 100% mirror-polished AISI316 stainless steel.It is recommended to install it on the chain by means of the Twist joint 01.738.01.Windlass ideal pull angle at 5° / 20° from the roller horizontal axis.

Bow rollers | Steel rollers | Stainless steel rollers

Code Description Lengthmm

Widthmm

Heightmm

01.120.10 Trefoil anchor 10 588 383 331

01.121.10 Roller with closing system 9.3 428 177 305


01.120.10

0

1.12

1.10

Foldable precision hinge, 180° rotation and screw cover

AISI 316 Made of mirror-polish AISI316 stainless steel.

For tip-top tables or hatches.

Fitted with screw cover to be fixed after mounting for neat design.

HIGH - PRECISION

INVISIBLE SCREW

Hinges

Code mm Thickness mm

38.292.00 110x42 3

Available as of December 2021

39.840.00 39.840.01 39.840.10

3

9.84

0.00

Rapid Lock system for fenders and bimini tops

AISI 316 Quick coupling/release system for fast fastening of fenders, Bimini tops, etc.Made of AISI316 stainless steel. When not in use, the recess base is flush with the surface.

Fitted with Dyneema ring for fastening to the fender/Bimini top.

FLUSH

Quick release | Bimini tops | Fenders | Fastening

Code Description mm

39.840.00 Base Rapid Lock Ø 33 x 53 h

39.840.01 Removable part Ø 39 x 30 h

39.840.10 Dyneema ring Ø 7


3

9.84

0.01

OSC

ULATI Selection

OSCULATI Selection 2021


Cable Hook

REGISTERED DESIGN / DISEGNO DEPOSITATO

Cable hook that lets through the power cord and the dock-to-boat water hose.It design allows for quick fastening to the mooring line.Very sturdy, UV- and sea water-resistant.

Cable Hook

Code For ropes Ø mm mm

06.319.00 14-30 50x205x53

V

ery

larg

e fa

sten

ing

bush

ing

4

6.81

7.00

3

4.35

8.38

Removable carbon pole for Bimini top2 PCS

MOUNT POLEThe pole is made up of two section and is fitted with anticorodal aluminiumbushings for fast mounting. Tightening bushings and a fastening line are alsosupplied. The pole rotates by 90° inside the busing and locks.A clamcleat already mounted on the pole allows for an easy adjustment andtensioning of the Bimini top.Compatible with recess-mount bushings 46.815.00/01, the bulkhead mountbushing kit 46.815.10 and the bulkhead mount stowage system 34.358.38.Fastening line made of spliced Dyneema with eye. It can be used for directfastening to the Bimini top with a 10-mm Ø ball or a shackle.

Bimini top system | Bimini tops

Code Ø mm Height cm No of sections

46.818.09 38 90/181 2

46.818.11 38 110/231 2

46.817.00 MARLOW 130-cm long spliced line for 50-cm usable adjustment34.358.38 Bulkhead stowage system

4

6.81

8.09

4

6.81

8.11

4

6.81

5.00

/01

46.815.00/01

46.815.00 46.815.01 46.815.00/01

46.815.00/01

Bushing for carbon poleRecess-fit bushing: made of stainless steel, fitted with 180° swivel lock. Arranged for 12-mm Ø water drain hose. Lock protection for the cup when not in use. The lock can be customized with a logo upon request.

Bulkhead bushing: upper and lower bulkhead support for Bimini pole. The pole rotates by 90° inside the support and locks. High-quality mirror-polished finish with front logo.Bulkhead mounting by means of two x M6x40 countersunk screws or longer ones. Blind lower support. Thru-hull upper support.

Bushings | Bimini top system | Bimini tops

Code Description

46.815.00 Recess-fit bushing, straight

46.815.01 Recess-fit bushing, inclined 6°

46.815.90 Mounting counterflange for recess-fit bushing

46.815.10 Bulkhead bushing kit

4

6.81

5.10

4

6.81

5.10

4

6.81

5.90

3

New

s N

ovem

ber

4

News November2021


1

5.48

0.20

1

5.48

0.20

1

5.48

0.20

Rocky shower telescopic rod for outdoor purposesThis rod makes it possible to have a shower head on the stern gangplank.Made of black anodized aluminium + stainless steel parts. The shower head can be adjusted in any position.Lightweight and telescopic for easy storage, rod outer diameter 35 mm (order 34.355.00 for bulkhead stowage).Ideal to match Adriana deck shower 15.480.00 or Keji II Continuum Flow 15.237.06.

Shower stands

Code Type Description

15.480.21 Standard Recess-fit SS base + POM bushing

15.480.20 Standard / Delux Shower rod

15.480.26 Delux Flush base with sliding cover,POM bushing and hidden screws.

1

5.48

0.21

1

5.48

0.21

1

5.48

0.26

1

5.48

0.26

1

5.48

0.26

Classic heavy hinged roller

Made of polished stainless steel. Nylon sheaves. Universal for DELTA / BRUCE / TREFOIL / CQR / SOC.

Bow rollers | Anchor retrievers | Steel rollers |

Code A mm B mm C mm Plate thickness mm Suitable for anchors max kg

01.333.01 330 70 117 4 10

01.333.02 400 70 117 4 15

01.333.03 495 90 150 5 20

01.333.04 595 90 150 5 30

01.333.05 695 90 150 5 30

Compact lightweight hinged roller

Made of polished stainless steel. Nylon sheaves.Universal for DELTA / BRUCE / TREFOIL / CQR / SOC.

Code Amm

Bmm

Cmm

Plate thicknessmm

Suitable for anchorsmax kg

01.333.10 300 80 80 3 10

01.333.11 400 80 80 3 15

DOUGLAS MARINE Silenced Springs mooring device

PATENT Made of specific HR stainless steel, they are equipped with anti-tension end-of-stroke and the particular heads allow a perfect axiality during traction.

Mooring springs | Mooring elastic systems |

Code For boatsup to m

Ømm

Lengthmm

FlushØ mm

Absorbing forcekg

Break loadkg

01.198.06 6 70 310 5 60 137001.198.08 8 70 350 6 100 183001.198.11 11 75 380 8 120 250001.198.14 14 90 480 9 190 380001.198.16 16 90 480 12 400 6200

News November 2021N

ews N

ovember


Watertight circuit breaker for winch, bow propeller and gangaway

HEAVY DUTY Resettable, it can be released by means of a special lever. It is both a fuse and a switch.Made in compliance with the USA SAE J1171 / SAE J1625 standards.Voltage allowed: max 48 V, operating temperature: -32° + 92°.

3/8" electric terminals.

Winches | Windlasses | Control box | Contactors

Code Max. load

02.752.50 50 A

02.752.70 70 A

02.752.10 100 A

02.752.15 150 A

02.752.20 200 A

02.752.25 250 A

Watertight circuit breaker for winch, bow propeller and gangaway

HEAVY DUTY Automatic resetting version.Made in compliance with the SAE J1625 / SAE 1171 standards.Operating temperature: -32° + 92°.

3/8" electric terminals.

Winches | Windlasses | Control box | Contactors

Code Max. load

02.753.60 60 A

02.753.80 80 A

02.753.12 120 A

02.753.15 150 A

02.753.20 200 A

02.753.25 250 A

Extreme Plus watertight and rechargeable LED torch

LED IP67

Technical features: - rechargeable low-voltage lithium battery with USB cable included; - 1A current draw for use of any USB sockets (i.e. 14.516xx/14517.xx); - small USB port for recharge and large USB port to use the torch as energy source for cell phones;- floating.

5 light functions:A) SPOT+COH-HI, 1400 lm, 1h duration;B) SPOT-HI, 950 lm, 1.15h duration;C) COB-HI, 750 lm, 1.45h duration;D) COB-LO, 45 lm, 20h duration;E) FLASH, 45 lm, 3h duration.

LED torches

Code Watertightup to m

Lumen Rangem

Duration h in full light / half light /flash mode

Body colourmm

12.170.13 1 1400/950/750/45 600/300/200 1/1.15/1.45/20 Fluo yellow 150x160xØ70 0.445


5

https://14517.xx/

New

s N

ovem

ber

6

News November2021


Adjustable 6x3W HD LED light for A-frame

IP67 Black coated aluminium body, stainless steel bracket.

Code V W K Beamtype

LEDHD

mm

OPTIONAL base plate

flat mounting 22/25-mm Ø pulpit

13.321.01 10/30 18 6000 SPOT 6x3 W Ø 115x64 13.240.80 13.239.80

1

3.23

9.80

1

3.24

0.80


IP67 White coated aluminium body, stainless steel bracket.Genuine BRIDGELUX (USA) LEDs.

Code V W K Beamtype

LEDHD mm

OPTIONAL base plate


13.321.03 10/30 24 6000 SPOT 8x3 W 140x96x60 13.240.80 13.239.80

1

3.23

9.80

1

3.24

0.80


IP67 White coated aluminium body, polished stainless steel bracket.Genuine BRIDGELUX (USA) LEDs.

Code V W K Beamtype

LEDHD

mm

OPTIONAL base plate


13.321.04 10/30 40 6000 SPOT 8x5 W 140x96x60 13.240.80 13.239.80

1

3.23

9.80

1

3.24

0.80


IP67 White coated aluminium body, polished stainless steel bracket.Genuine CREE (USA) LEDs.

Code V W K Beamtype

LEDHD mm

OPTIONAL base plate


13.321.05 10/30 50 6000 SPOT 5x10 W 109x116x75 13.240.80 13.239.80

1

3.23

9.80

1

3.24

0.80

News November 2021N

ews N

ovember


14.186.14

14.186.15

Fairlead/gland made of nylon, fiberglass and stainless steelThey ensure perfect watertightness (IP67) for cable passing. They allow the cables to pass without disassembling end connectors, if any.Fiberglass-reinforced nylon body with AISI316 stainless steel plug.

Glands

Code Ø base Protrusion mm Cable Ø mm Cable mounting14.186.14 48 14 3-14 vertical (in line)14.186.15 48 14 3-8 lateral (90°)

Europump New Generation low-consumption fresh water pumpIt can serve two outlets. Overload protection. It can run dry without getting damaged. IP54 watertight. Self-priming up to 1.5 metres. Pulsation-dampening by-pass system.

Fresh water pumps

Code V Flowl/min

Current draw A

Working pressurebar

Snap hosemm

16.501.12 12 5.6 4.5 2.8 10

Europump Next Generation submersible bilge pumpCE-certified in compliance with the ISO 8846/8849 directive.Extremely compact in size, fitted with backflow check valve. Removable hose connector adjustable at 360°.

Submersible bilge pumps | Europump | Next

Code V Model Flowl/min

Current draw A

Headm

Ø-Hose adaptor mm

OPTIONAL 29-mmØ 90° hose adaptor

16.128.01 12 600 38 2.5 2.5 19/29 16.128.0016.128.05 12 1100 70 4.0 4 25/29 16.128.0016.128.06 24 1100 70 2.5 4 25/29 16.128.00

Europump Next Generation automatic submersible bilge pump

CE-certified in compliance with the ISO 8846/8849 directive.Compact in size, fitted with an electronic timer sensing automatic system to check the presence ofwater every 2.5 minutes for a duration of 0.5 seconds.Removable hose connector adjustable at 360°.Fitted with backflow check valve.

Submersible pumps | Automatic bilge pumps |

Code V Model Flowl/min

Current draw A

Headm

Hose adaptor Ø mm


16.129.01 12 600 38 2.5 2.5 19/29 16.128.00 16.129.03 12 750 51 3.5 3.0 19/29 16.128.00 16.129.04 24 750 51 2.0 2.0 19/29 16.128.00 16.129.05 12 1100 70 4.0 4.0 25/29 16.128.00 16.129.06 24 1100 70 2.5 2.5 25/29 16.128.00

7

New

s N

ovem

ber

8

News November2021


▶ Bronze fittings, skin fittings and valvesGUIDI series 2000 bronze skin fitting

BRONZE / BRONZO Bronze

Code Thread H mm H1 mm A mm B mm17.550.01 1/2" 95 75 74 3717.550.02 3/4" 103 80 81 4017.550.03 1" 111 85 104 5517.550.04 1" 1/4" 118 90 118 6417.550.05 1" 1/2" 129 100 130 7117.550.06 2" 142 110 154 84

GUIDI bronze skin fitting

BRONZE / BRONZO

Bronze

Code Thread H mm H1 mm D mm F mm17.551.01 3/8" 64 60 28 1117.551.02 1/2" 70 65 40 1317.551.03 3/4" 75 70 47 1917.551.04 1" 85 80 57 2517.551.05 1" 1/4" 91 85 67 3217.551.06 1" 1/2" 96 90 75 3817.551.07 2" 107 100 88 50

GUIDI series Manta bronze cap

BRONZE / BRONZO

Bronze caps

Code Thread A mm B mm H mm17.552.01 1/2" 84 49 2017.552.02 3/4" 102 57 2317.552.03 1" 118 68 2617.552.04 1" 1/4" 136 79 3017.552.05 1" 1/2" 154 88 3417.552.06 2" 180 102 39

17.551.xx Matching skin fitting

GUIDI bronze F-F ball valve with lever-handle full flow

BRONZE / BRONZO

Ball valves | Bronze

Code Thread A mm L mm H mm Flow 1 bar (l/h)17.557.01 3/8" 11.4 54 48 900017.557.02 1/2" 15 65 49 1800017.557.03 3/4" 16.3 72 56 3900017.557.04 1" 19.1 86 60 7100017.557.05 1" 1/4" 21.4 99 72 11900017.557.06 1" 1/2" 21.4 107 77 19600017.557.07 2" 25.7 128 88 300000

GUIDI bronze non-stick valve, series Alex with full flow

BRONZE / BRONZO PATENT NON - STICK

Non-stick valves | Bronze

Code Thread A mm L mm H mm V mm SW mm Flow 1 bar (l/h)17.558.03 3/4" 16.3 73 85 58 31 3900017.558.04 1" 19.1 84 94 63 38 6500017.558.05 1" 1/4" 21.4 97 110 72 47 11000017.558.06 1" 1/2" 21.4 103 118 78 54 18900017.558.07 2" 25.7 124 139 90 67 280000

GUIDI bronze F-F 90° elbow

BRONZE / BRONZO

Elbows | Bronze

Code Thread A mm H mm17.560.01 1/4" 11 1917.560.02 3/8" 11.4 2117.560.03 1/2" 15 2717.560.04 3/4" 16.3 31.517.560.05 1" 19.1 37.517.560.06 1" 1/4" 21.4 4517.560.07 1" 1/2" 21.4 4817.560.08 2" 25.7 59

https://17.551.xx/

News November 2021N

ews N

ovember


GUIDI bronze M-F 90° elbow

BRONZE / BRONZO

Elbows | Bronze

Code Thread A1 mm A mm H mm L mm17.561.01 1/4" 13 11 28 3517.561.02 3/8" 10.1 11.4 21 28.517.561.03 1/2" 13.2 15 27 3517.561.04 3/4" 14.5 16.3 31.5 39.517.561.05 1" 16.8 19.1 37.5 4617.561.06 1" 1/4" 19.1 21.4 45 5417.561.07 1" 1/2" 19.1 21.4 48 5917.561.08 2" 23.4 25.7 59 69

GUIDI bronze F-F-F T-fitting

BRONZE / BRONZO

Elbows | Fittings | Bronze

Code Thread A mm H mm L mm17.562.01 3/8" 13.5 21 4217.562.02 1/2" 15 27 5417.562.03 3/4" 16.3 31.5 6317.562.04 1" 19.1 37.5 7517.562.05 1" 1/4" 21.4 45 9017.562.06 1" 1/2" 21.4 48 9617.562.07 2" 25.7 59 118

GUIDI bronze M-F connector

BRONZE / BRONZO

Connectors | Bronze

Code Thread A mm H mm SW mm17.563.01 3/8" x 1/4" 11.5 17.5 1917.563.03 1/2" x 3/8" 15 21.5 2217.563.05 3/4" x 1/2" 16.5 23.5 2817.563.07 1" x 3/4" 19 26.5 3517.563.09 1" 1/4" x 1" 21.5 30.5 4617.563.12 1" 1/2" x 1" 1/4" 21.5 52 5217.563.13 2" x 1" 1/2" 25.5 52 52

GUIDI bronze M-M double nipple

BRONZE / BRONZO

Bronze

Code Thread A mm A1 mm H mm SW mm17.564.01 3/8" x 1/4" 11.5 11 28.5 1917.564.02 1/2" x 3/8" 15 11.5 33 2217.564.03 3/4" x 1/2" 16.5 15 38.5 2817.564.05 1" 3/4" 19 16.5 43 3517.564.06 1" 1/4" x 1" 21.5 19 49.5 4617.564.07 1" 1/2" x 1" 1/4" 21.5 21.5 53 52

GUIDI bronze female hose connector

BRONZE / BRONZO

Hose connectors | Female hose connectors |

Code Thread Hose fitting Ø mm17.569.02 1/2" 2017.569.03 3/4" 2517.569.04 1" 2517.569.07 1" 1/2" 38

GUIDI bronze male hose connector

BRONZE / BRONZO

Hose connectors | Male hose connectors |

Code Thread Hose fitting Ø mm Code Thread Hose fitting Ø mm17.568.01 1/4" 10 17.568.15 3/4" 2517.568.02 3/8" 10 17.568.17 1" 2517.568.03 3/8" 13 17.568.18 1" 3017.568.07 1/2" 13 17.568.22 1" 1/4" 3517.568.09 1/2" 16 17.568.23 1" 1/4" 3817.568.11 1/2" 20 17.568.25 1" 1/2" 3817.568.12 3/4" 16 17.568.28 1" 1/2" 5017.568.14 3/4" 20 17.568.29 2" 50

9

New

s N

ovem

ber

1

News November2021


Self-supporting Wind scoop for side porthole

SELF - STANDING Made of nylon fabric stiffened with a self-supporting slat.

Ideal for easy and fast installation on side hatches.

Its conic shape lets air through with a minimum amount of breezefor optimum ventilation of the interiors.

Easy and fast to stow in a compact case.

EASY INSTALLATION

Hatches | Portholes

Code Version Ø when closed cm Height cm23.135.01 For portlights 30 to 40 cm 24 30

GUIDI series Ionio water strainerMade of nickel-plated bronze with polycarbonate cover. Cup model fitted with side outlet and one on the bottom. Strainer made of AISI316 stainless steel and neoprene seals.

Water strainers

Code OutletØ G

Lmm

Hmm

H1mm

Flow l/h 0.1 bar 1 bar

17.648.01 3/4" 151 145 94 4650 1490017.648.02 1" 151 145 94 7950 2550017.648.03 1" 1/4" 167 168 106 12100 3820017.648.04 1" 1/2" 180 178 111 19100 6125017.648.05 2" 213 215 135 30000 96200

MERCURY oil filters for 4-stroke outboards Filters

Code Engine Engine / Orig. Ref. HP mmcase Ø A H outside Ø D

17.504.20 Mercury Fourstroke 35-8MO-123025 175/400 75 86 77

SUZUKI oil filters for 4-stroke outboards Filters

Code Engine Engine / Orig. Ref. HP mmcase Ø A H outside Ø D

17.504.01 Suzuki DF 4-5-6-6A 16510B16H11N000 4/5/6 35 43 37

Hose connector for waste deck filler ISO8840 To be screwed onto 1 1/2" thread filler caps, BPS for connection to the dock draining nozzles incompliance with ISO8840.

Hose connector for deck filler | Waste hose

Code For 1" 1/2" deck fillers

20.866.90 20.366.09; 20.450.04; 20.461.09; 20.463.09;20.666.09; 20.667.06; 20.668.06; 20.668.13; 20.866.39

26.700.86

26.700.87

InclinometerHigh precision double bubble inclinometer

Inclinometer

Code Scales mm Mounting

26.700.86 30°- 0° - 30° + 5° - 0° - 5° 100x80 4 screws or with self adhesive label provided

26.700.87 45°- 0° - 45° + 6° - 0° - 6° 101x82 4 screws

0

News November 2021N

ews N

ovember


Heavy Tug high-efficiency dual-cone drogue (floating anchor)The dual-cone profile increases the seabrake efficiency as the sea strength increases. Water goes out through the drain plug between the cones thus keeping the trim constant. Made with ultra sturdy materials.Possible uses: floating anchor, anti-gliding anchor, reduces broaching, anti-rolling when at anchor,stabilizes the boat on tow, reduces drifting, break, stabilizer, emergency steering system.It comes in a bag.

Floating anchors | Dual-cone drogues

Code Model cm For vesselsup to mWidth (R) Length (L)

32.783.01 HT 24L 65 200 10.532.783.02 HT 30L 80 240 16.532.783.03 HT 48L 120 360 22.532.783.04 HT 60L 150 470 29

Available as of December 2021

4

2.36

5.00

SUP board or gangplank holder kit made of stainless steel This kit fastens the SUP board or the gangplank out of board.

To be mounted to the railing by means of 360° adjustable clamps.

The quick release knob allows for each arm to be rotated immediately when not in use or to adjust toa smaller angle in case of narrower SUP boards or gangplanks.

Each arm is fitted with an HD foam PVC chafe guard as well as adjustable and removable straps.

Standard version: for 22- to 30-mm diameter tubes with plastic accessories.Deluxe version: for 20- to 28-mm diameter tubes with AISI316 stainless steel accessories.

SUP board holders

Code Version dimensions mm For tube Ø mm

42.365.00 Delux 230 x 115 20/28

42.365.10 Standard 230 x 115 22/30

4

2.36

5.00

4

2.36

5.10

11

New

s N

ovem

ber

1

News November2021


2

News November 2021N

ews N

ovember


Drain bag for 42.354.0042.354.90 PVC drain bag with hose connector to be used in case of water seepage.Easy to install on the davit base by means of a metal clamp.

Davits

CodeDAVIT

Load capacity kg

Mounting base Ø mm

Recess holeØ mm

Telescopic tube (A/B) Ø mm

Height(H) mm

Reach(L) mm

Inside(D) mm

TubeØ mm

DRAIN BAGOPTIONAL

42.354.00 180 per pair 160 112 73/80 1.020 1.100 912 in rest position 73 + 80 2 42.354.90

4

2.35

4.90

4

2.35

4.90

Small telescopic retractable davit

FLUSH Dual universal retractable davit kit made of anodized aluminium.When in retracted position, it is hidden under the walking surface and leave the deck clear.Fitted with double sheave and becket for both gangway and dinghy.Two operating positions: in line with the boat (dinghy holding) or inclined at 20° on the inner part (gangway holding). The telescopic tube has a handle that can be rested on its head and adjusts the pole at different lengths depending on the needs and on the dinghy type.

OPTIONAL 42.358.90 PVC drain bag with hose connector to be used in case of water seepage. Easy to install on the davit base by means of a metal clamp. Anodized aluminium rest base and anti-shock seal + drainage system.

Small telescopic davits | Retractable davits

CodeDAVIT

Capacitykg

Fastening baseØ mm

Recess boreØ mm

Telescopic tubes Ø (inside/outside) mm

mm DRAIN BAGOPTIONAL height (H) Reach (L) inside (D)

42.358.00 180 per pair 160 112 73/80 990 550/900 1115 2 42.358.90

49.560.00 OPTIONAL system for installation on the gangplank

4

2.35

8.90

4

2.35

8.90

Portofino hidden ladder

AISI 316

PATENTED

INTEGRATED HANDLE

4-step telescopic ladder with built-in railing for easier climbing. Slides and guides made of AISI stainless steel, delrin bearings, improved mechanical parts.Made in Italy by Douglas Marine.

Ladders | Telescopic ladders

Code Steps Length mm Front plate mm49.568.04 4 1156 55x95

For installation above waterline in a locker with drain. Non water tight box.

13

New

s N

ovem

ber

1

News November2021


Bimini top tensioning strap kitIt includes a 25-mm wide and 3-m long tape (2.90-m usable length).Snap hook and strap on one end for fixed adjustment, snap hook on the other end for tensioning.Sold in pairs in display package.

Bimini tops | Strap kit | Bimini top kit

Code cm Package46.677.00 2.5 x 300 2 pcs

Pedestal with seat mountGAS SPRING / MOLLA A GAS

Made of mirror-polished anodized aluminium, fitted with large diameterbases and thick tubes.

It matches any seat frame.

Seat pedestals

Code Heightmm

Type Table platemm

PedestalØ mm

BaseØ mm

Base

48.704.61 530/710 Telescopic 338x182 87 305 Polished

Customized height on request (min. 10 pcs).

Composite material tableMade of sturdy composite material. Snap mounting on its dedicated bases.

Tables

Code Type Colour For mm

48.417.52 Rectangular White 48.417.60; 48.417.61 760 x 460

Paws Up doggy rampLightweight, antiskid, easy to install on and remove from already mounted ladders (min. 3 steps, 38- to 57-mm wide) in a matter of seconds.

Telescopic tubes adjustable in 3 positions for perfect inclination.

Fitted with safety strap with hook&loop fastener.

Doggy ramps

Code mmsize closed length width

49.538.20 410x1065x160 760 340

4

News November 2021N

ews N

ovember


50.103.45

50.103.47

External stainless steel hob unitsFitted with safety thermocouples.

Hobs

Code No of burners external mm Burner W OPTIONAL trivet50.103.45 1 210x290x90h 1750 50.100.4850.103.47 2 440x290x90h 1900+1000 50.100.49

5

0.10

0.91

5

0.10

0.92

50

.103.4

3

50

.103.4

4

Recess-fit stainless steel cooktopSupercompact version fitted with safety thermocouple

Hobs

Code No ofburners

mm BurnerW

Pot holder outside recess

50.103.43 1 320x285 280x245 1750 50.100.9150.103.44 2 350x320 280x310 1750x2 50.100.9250.103.42 2 380x360 320x340 1750x2 50.100.9250.103.48 3 470x360 320x430 1000+1750+3000 50.100.93

50.103.48 50.103.42

50.706.13

50.706.11

50.706.12

Gas hob with pyroceram burnersFitted with safety thermocouple.

Hobs

Code No of burners

mm PowerW

Column pot holder OPTIONALoutside recess

50.706.11 1 325x290 270x305 1900 50.100.9150.706.12 2 500x300 480x280 1750+3000 50.100.9250.706.13 2 380x280 360x260 1000+1750 50.100.9250.706.14 3 504x410 484x390 1000+1900+3000 50.100.93

50.100.91

50.100.92

50.706.14

50.100.93

Crystal glass worktop with hobs + Stainless Steel sink Hobs | Sinks

Code No of burners

BurnersW

mm Tap included

OPTIONALpot holderexternal recess

50.100.69 2 2x1750 600x420X47 (overhang) 47 (overhang) No 50.100.49

50.100.92

Stainless steel and pyroceram electric barbecue

Code V Power W outside mm50.381.01 220 2500 500x300

15

New

s N

ovem

ber

1

News November2021


Blue Bag thermo-welded water-proof engine cover

Preserve outboard or inboard engine from creation of sea vegetation (slime, barnacles and other species). It can also be used to wash the cooling system with fresh water, without hauling the boat. Easy to install and dismount. Made of tough fabric with double PVC coating to be very durable.

Waterproof foot covers | Thermo-welded foot

Code For engines

52.757.01 Up to 80 HP outboard52.757.02 Over 80 HP outboard + sterndrive units

52.757.03 Over 250 HP outboard + sterndrive units

Tank with fresh water pump

Polyethylene tank already assembled with fresh water pump type 16.503.12. Recommended for one outlet.When rotated at 90°, it height varies from 34 to 26 cm according to your needs.

Water tanks

Code Flow Capacity l

Autoclave oulet Ø

mm

Inlet jointØ mm

VentØ mm

Bracket Standard thickness

mm +/- 5%*

outside

mm

52.194.22 3.8 l/min at 12 V 49 10 38 16 52.195.00 4 600x260x340

Can be installed with base 340x400 (height 260 mm) or base 400x260 (height 340 mm). Made-ready for bracket mounting 52.195.00.

*Our fresh water tank thickness is calculated for standard use of tanks to be installed on leisure boats. The installer or the designer shall be responsible for checking that both the tanks and their mounting systems comply with the required use. Technical support shall be requested, if necessary. The option to require on demand tanks increased in thickness.

5

2.19

5.00

Electric inflator for SUP boards

2-stage pump for inflation and deflation.Compact and easy to carry by means of a comfortable handle.Digital controller and LCD display for pressure setting.Lighter plug + battery clamps.

Electric inflators | Inflators for SUP boards |

Code Function V W Flowl/min

Max pressure

Current draw A

mm

66.451.01 Inflation + deflation 12 110 350 at low pressure70 at high pressure

1.38 mbar (20 PSI) 9-12 155x250x

175

6

New

s Novem

berNews November 2021


▶ D-SPLICER splicing tools

D-SPLICER set of 4 needles 4 needles | Needles for ropes | D-SPLICER

Code Description

10.301.00The splicing set includes 4 needles of different size:

N. 2 x Ø 1 mm x 24 cm suitable for < Ø 2 mm line splicing,N. 2 x Ø 1.5 mm x 26 cm suitable for Ø 2-4 mm line splicing.

When using the needles in the right manner one can extend their lifespan

D-SPLICER needle

With fixed handle for easy use. Needles for ropes | Extra small needles | D-

Code Initials Ø-needle mm For Ø-lines mm10.302.10 F10 1 0 - 210.302.15 F15 1.5 2 - 410.302.20 F20 2 4 - 610.302.25 F25 2.5 6 - 8

YES! Clamp only the tip of the rope

NO! Do not double the rope

YES! Taper thicker ropes OR take a larger D-SPLICER needle

NO! Too thick!

D-SPLICER splicing handbook

Handbook with detailed instructions for good and long-lasting splicing. Splicing handbook | D-SPLICER

Code Language10.306.01 Italian10.306.02 English

D-SPLICER ceramic knife

This knife remains sharp and cuts super fibers like Dyneema, Spectra & Vectran with ease. It comes in a protective cover.

Ceramic knives | Knives for super fibers | D-

Code Initials For 10.306.24 D-24 Ø-lines up to 20 mm

D-SPLICER scissors

Designed for cutting super fibres like Dyneema, Vectran, Stirotex.

Scissors for ropes | D-SPLICER

Code Initials For 10.307.16 C-16 Ø-lines up to 8 mm

D-SPLICER tape

Strong, thin and smooth for perfect application. D-SPLICER

Code m10.308.00 66

17

New

s N

ovem

ber

1

News November2021


1

2.03

4.14

1

2.03

4.16

ENECOM flexible solar panels

MADE IN ITALY

Built with high-performance aerospace solar cells. Latest generation ultrathin and ultraflexible panels (1.7 mm). 17.25% mono-crystalline cell efficiency. The panel is a sandwich construction made up of a plastic support + solar cell + UV-resistant epoxyresin surface coating. Installation by means of double-sided tape. Connection cable with plug, included.Mono-crystalline panels.

Generator | Solar energy | Energy | ENECOM

Code Max power(Wp)

Thicknessmm

V Cablecm mm

12.034.14 140 1.7 12 100 1194x660 1.8512.034.16 160 1.7 12 100 1352x660 2.1

To be completed with voltage regulator and MC4 connectors if needed depending on the system requirements.

1

3.54

4.01

/02

1

3.54

4.11

1

3.54

4.22

Japanese recessless ceiling LED light

LED IP65

Polycarbonate diffuser. Courtesy lights | Ceiling lights | Japanese ceiling

Code Finish V W* LEDNo.

Switch mmØ outside A Ø Glass B

13.544.01 Stainless steel 12 3.7 20 x 0.2 Yes 138 10013.544.02 Stainless steel 12 3.7 20 x 0.2 Yes 169 12513.544.11 Polished lacquered brass 12 3.7 20 x 0.2 Yes 138 10013.544.22 Polished lacquered brass 12 3.7 20 x 0.2 Yes 169 125

* Equivalent to 19 W halogen bulbAvailable as of January 2022

Compact fairing light pair with LED bulb

AISI 316 Made of mirror-polished AISI 316 stainless steel. Front protection lens.

Topside lights | In hull installation

Code LED included Cone LED bulb

13.254.13 12 V 4 W 45° FMW 14.258.5613.254.14 24 V 3,5 W 45° FMW 14.258.59

ROKK wireless Catch watertight battery charger

IPX6

Safely holds & wirelessly charges your phone at the same time. Now you can keep your phone in a safe place onboard, in sight, charged and ready to go. Designed to easily install onto any flat surface. Simply place your phone onto the center of the charging mat and instantly start wirelessly charging. Qi certified.

Wireless battery chargers | Scanstrut | ROKK

Code Input V mm14.515.07 12/24 206x118

8

New

s Novem



1

4.29

8.01

1

4.29

8.02

1

4.29

8.03

1

4.29

8.04

1

4.29

8.05

1

4.29

8.06

1

4.29

8.07

Marina R II dual LED rocker switch, IP56 watertightIP56 watertight, Marina series. 21.5x36.8-mm rectangular bore required for installation. Maximum capacity 20 A at 12 V and 12 A at 24 V. Supplied with double red LED: one for the symbol,which is always on, the second for a special slit under the symbol that switches on when thesymbolindicator is activated. Rocker switch to order separately.

Watertight switches | Watertight rockers

12/24V switch

Version Type Recommended for Terminals

14.298.01 No toggle ON-OFF - 3

14.298.02 No toggle (ON)-OFF Horns, toilet unit controls 3

14.298.03 No toggle, no LED (ON)-OFF-(ON) Hydraulic gangplanks, windlasses, flaps, trims 6 (2 poles)

14.298.04 No toggle ON-OFF-ON Bilge pumps (automatic/manual), navigation + mast head lights 4

14.298.05 No toggle (ON)-OFF-(ON) Hydraulic gangplanks, windlasses, flaps 4

14.298.06 No toggle ON-OFF-(ON) Bilge pumps (automatic/manual) 4

14.298.07 No toggle ON1 - OFF - ON1+2

ON1 = circuit 1ON1+2 = circuit 1+2

Navigation lights on hulls up to 12 m:ON1 = white 360°

ON1+2 = white 360°+ red/green 112°.5

4

(ON) means with spring return.

Rocker switches with backlit icons for Marina R II switchesAdditional warning light that lights up when connected. Semi-rigid anti-slip surface, polycarbonate coated in black polyurethane.

Switches

Description Polycarbonate hard surface

Anti-slip semi-rigid surface - Polycarbonate coated in black

polyurethane

01 - Navigation lights 14.299.40 14.299.0102 - Mooring lights 14.299.41 14.299.0203 - Horn 14.299.42 14.299.0304 - Flap 14.299.43 14.299.0405 - Blower 14.299.44 14.299.0506 - Wiper 14.299.45 14.299.0607 - Bilge pump 14.299.46 14.299.0708 - Fresh water pump 14.299.47 14.299.0809 - Neutral, no symbols 14.299.48 14.299.0910 - Bilge pump 2 14.299.49 14.299.1011 - Panel lights 14.299.50 14.299.1112 - Stereo 14.299.51 14.299.1213 - Cockpit lights, cabin lights 14.299.52 14.299.1314 - Anchor winch control 14.299.53 14.299.1415 - Hatch opening 14.299.54 14.299.1516 - Battery parallel 14.299.55 14.299.1617 - Refrigerator 14.299.56 14.299.1718 - High beam light 14.299.57 14.299.1825 - Cabin lights 14.299.65 14.299.2529 - Gangplank lights 14.299.69 14.299.2930 - Deck courtesy lights 14.299.70 14.299.30

Rocker switches are not compatible with switches of Marina R Series sold until February 2021.

RIVIERA Aries 2" 1/2 compassNon recess fit model with bayonet fixing base.

Compasses

Code Base Ø mm Height mm Rose colour Body colour25.025.29 100 60 Black Black

Compact radio-controlled meteo stationData supplied:- Radio-controlled time and date.- Moon phases / calendar / alarm.- Inside/outside temperature + min/max value registration.- Air pressure graph over the last 12 hours.- Weather trend indicator.- Dawn and sunset hour of 193 locations.- Bulkhead or flat mounting.Code mm28.883.51 154x143x35

19

New

s N

ovem

ber

2

News November2021


JABSCO Washdown Par-Max 6 Plus pump kit

Ideal for washing down, this kit includes a Par-Max 6 Plus pump (increased pressure 4.8 bar), astrainer, a self-coiling hose and a trigger nozzle

JABSCO

Code V Flowl/min

Max current draw A

Max pressure bar

FuseA mm

16.437.01 12 23 20 4.8 25 269x120x13016.437.02 24 23 10 4.8 15 269x120x130

JABSCO Par-Max Plus fresh water pump

Constant flow, very silent, self-priming up to 3 m, sealed manostat tested for up to 4 million cycles. The pump can run dry without getting damaged. IPX6 watertight in compliance with ISO 8846 standards.Fitted with 1/2" snap fittings.

JABSCO

Code V Flow l/min Max current draw A Max pressure bar A mm16.436.01 12 15 9.5 2.8 12 269x120x13016.436.02 24 15 5 2.8 6 269x120x13016.436.03 12 23 12 2.8 17 269x120x13016.436.04 24 23 6 2.8 8 269x120x130

JABSCO DiMOND V-FLO 5 fresh water pump

Variable-flow, constant-pressure fresh water pump with performance self-diagnostic test to preventpossible issues (lack of water, circuit losses, low voltage, etc.)

JABSCO

Code V Max flowl/min

Max current draw A

Max working pressure PSI/Bar mm

Fittings

16.435.73 12 19 15 40/2.75 110x156x251 2 x 1/2" thread + 2 x 1/2" with hose connector

16.435.74 24 19 10 40/2.75 110x156x251 2 x 1/2" thread + 2 x 1/2" with hose connector

1

6.16

1.01

/02

16.161.03/04

1

6.16

1.05

/06

Europump Next Generation aerator pump for livewell/baitwell tanks

CE-certified in compliance with the ISO 8846/8849 directive. Low consumption. Pump unit + hose connector adjustable at 360°. Motor can be pulled off for cleaning. Fitted with backflow check valve.

Pumps for livewell/baitwell tanks | | Europump |

Code Version V Flowl/min

Current draw

A

Headm

Hose adaptor Ø

mm


16.161.01 in-line 12 51 3.5 3 19/29 16.128.00 16.161.02 in-line 24 51 2.0 3 19/29 16.128.00 16.161.03 vertical motor 12 51 3.5 3 19/29 16.128.00 16.161.04 vertical motor 24 51 2.0 3 19/29 16.128.00 16.161.05 inside mounting 12 51 3.5 3 19/29 16.128.00 16.161.06 inside mounting 24 51 2.0 3 19/29 16.128.00

1

6.16

1.01

/02

1

6.16

1.03

/04

1

6.16

1.05

/06

0

New

s Novem



Patented X-Air™ Impeller

ATTWOOD Tsunami Mk2 bilge pump

Features:- Patented X-Air™ Impeller: Prevents air locking so that the pump will not run dry and burn out.- Flexible Outlets.- Single-Hand Pump Cartridge Release.- Exterior Mounting Feet: Eliminates the need to remove the basket.- Retrofits footprint for existing bilge pump.- No Pipe Or Hose Removal Required: Reduces the time that it takes to replace the cartridge.- Tricuspid Check Valve: Helps prevent the water from backflowing through the pump.

Sold in display packaging.

Code Type Model V Flowl/min AxB mm

Ø straight and 90° hose connection mm

16.492.01 RETAIL 1 T500 12 28 93x91 19/2516.492.02 RETAIL 1 T800 12 42 110x101 19/2516.492.03 RETAIL 1 T1200 12 52 112x101 25/3216.492.05 RETAIL 1 T1200 24 52 112x101 25/32

Patented X-Air™ Impeller

ATTWOOD Sahara Mk2 automatic bilge pump

Features:- Patented X-Air™ Impeller: Prevents air locking so that the pump will not run dry and burn out.- Flexible Outlets.- Single-Hand Pump Cartridge Release.- Exterior Mounting Feet: Eliminates the need to remove the basket.- Retrofits footprint for existing bilge pump.- No Pipe Or Hose Removal Required: Reduces the time that it takes to replace the cartridge.- Improved engine cooling.

Sold in display packaging.

ATTWOOD

Code Type Model V Flowl/min

Ø of straight and 90° hose

connectormm

Hose connector straight 90°

16.490.01 RETAIL 1 S500 12 26 19/25 INCLUDED INCLUDED16.490.02 RETAIL 1 S800 12 39 19/25 INCLUDED INCLUDED16.490.03 RETAIL 1 S1200 12 69 25/28 INCLUDED INCLUDED16.490.05 RETAIL 1 S1200 24 69 25/28 INCLUDED INCLUDED16.490.01BU BULK 12 S500 12 26 19/25 16.491.91* 16.491.92*16.490.02BU BULK 12 S800 12 39 19/25 16.491.91* 16.491.92*16.490.03BU BULK 12 S1200 12 69 25/28 16.491.93* 16.491.94*

* Hose connection to be ordered, 12-pcs-package.

16.491.91/93

1

6.49

1.92

/94

21

New

s N

ovem

ber

2

News November2021


Pet Vest lifejacket for cats and dogs

Made of sturdy nylon/fabric, with soft foam padding for the animal’s comfort. Fitted with rescue handle on the back.

Lifejackets for cats/dogs

Code Size22.404.50 up to 4 kg22.404.51 3-6 kg22.404.52 5-10 kg22.404.53 9-18 kg22.404.54 18-36 kg22.404.55 over 35 kg

Liferaft holder kit

22.711.03 Liferaft holder kit including L brackets for on-deck or bulkhead installation. AISI316 stainless steel parts. Fitted with self-blocking quick release buckles and high-resistance seam polyester straps.

Liferaft holder

Dinghy with high-stiffness inflatable deck floor

This technology combines easy stowage to excellent seaworthiness. Fold after use like a rigid slat dinghy. Ideal in case of limited stowage space. It comes with oars, inflater, repair kit and carrying bag.

Inflatables

Code Type Lengthm

Widthm

No ofpeople

Max powerHP

TunnelØ cm

Airchambers

Permitted loadkg

deflatedcm

*

22.630.25 240 2.4 1.37 2 4 36 3+1 350 101x60x31 2322.630.28 270 2.7 1.5 3+1 10 42 3+1 484 111x61x35 3322.630.32 310 3.1 1.51 4+1 15 42 3+1 566 111x61x38 35

* Weight net of the removable accessories

Flag - Albania

Made of polyester, indelible colours.Flags

20x30 cm 30x45 cm 40x60 cm35.474.01 35.474.02 35.474.03

2

New

s Novem



Kit of NMEA 2000 connectors

IP68 Connectors: made of metal.Type: Micro (22 AWG; 24AWG).Colour: blue.

Electronics | NMEA connectors

Code Description

29.360.01Power cable for system with 3A TEE terminal, 5 x IP68 contacts, 4A connector,

3A cable Female terminal connector, 5 x IP68 contacts, 5 x 60V contacts,120 Ώ resistance Junction knot with 3 x NMEA 2000 2F+1M IP68 4A receptors,60V NMEA 2000 IP68 3A male/female connection cable, 60V, 5 x 2-m contacts

2

9.36

1.01

/03/

05/1

2

29.364.01

29.364.02 2

9.36

3.15

29.363.04

29.363.06

29.363.02

NMEA 2000 connector

IP68 Connectors: made of metal.Type: Micro (22 AWG; 24AWG).Colour: blue.

Electronics | NMEA connectors

Code Description Length m Power Notes29.361.01 Male/female cable 1 3 A -29.361.03 Male/female cable 3 3 A -29.361.05 Male/female cable 6 3 A -29.361.12 Male/female cable 12 3 A -

29.363.02 Junction knot with 3 x NMEA 20002F+1M receptors - 3 A -

29.364.01 Male terminal connector - - Resistance 120 Ώ29.364.02 Female terminal connector - - Resistance 120 Ώ

29.363.15 Power cable for system with TEE terminal - 3 A (cable) 4 A (connector) -

29.363.04 2-way connector NMEA 2000IP68 5 contacts 4A 60V - 4 A -

29.363.06 2-way connector NMEA 2000IP68 5 contacts 4A 60V - 4 A -

3

1.60

1.00

3

1.60

2.00

/ 31

.604

.00

3

1.60

6.00

Push button

G

H

D

E E

Aerosol fire suppression system, RINA type-tested

< 24 m Max Marine RINA type-tested aerosol fire-suppression system consists of agenerator module filled with solid extinguishing agent. Upon activation the agent turns into aerosol having few micron particles thatdisperse into the environment like a gas.The aerosol generated extinguishes the fire by inhibiting the combustion chemicalreaction without reducing the content of oxygen present in the protectedenvironment, without generating toxic or corrosive substances and without ozonedepletion. This product is eco-friendly.The system has a pull activation device or a remote-controlled electrical activationdevice as well as an automatic intervention device (thermal wire).This system has several advantages: small size, low weight, easy to installsince no piping, no delivery nozzles and no under-pressure containers arerequired.Max Marine activation and intervention logics are supervised by a control panelhaving free contacts to stop utilities.Central unit power: 24V.

AEROSOL

Aerosol systems | Max Marine | Fire suppression

Code Components Model Max protected

gross volume m3

Max protected net

volumem3

Ø x L (each

generator unit)

for the system

31.601.001 x generator module 1 with

fastening brackets and thermal wire (H)

Max Marine 10 13 10 86x140 2

31.602.00

1 x generator module 2 with fastening brackets, 1.5-m

connection cable (E), control central unit (D),

pre-alarm siren (F),lamp test (G)

and thermal wire (H)

Max Marine 20 25 20 100x240 5

31.604.00

1 x generator module 2 with fastening brackets, 2 x 1.5-m connection cables (E), control central unit (D),

pre-alarm siren (F),lamp test (G)


Max Marine 45 50 40 100x240 9.5

31.606.00

2 x generator module 3 with fastening brackets, 2 x 1.5-m connection cables (E), control central unit (D),

pre-alarm siren (F),2 x lamp tests (G)


Max Marine 70 70 65 115x260 13

23

New

s N

ovem

ber

2

News November2021


▶ ROPEYE textile loops

39.810.01 39.810.02 39.811.01

39.811.02

ROPEYE XXS/XS stick-on textile loopRopeye has two different types of XXS loops: carbon & glass fibre. The loops are used as stick-on’s on a sanded surface to glue the loops to. For elastic gluing: SIKAFLEX 291i 65.289.XX. Ideal as inside fitting to organize equipment without the need to drill holes for installation.

Pad-eye | Loops | Carbon | Glass fibre

Code Ropeye Code

Material Rope(A) mm

Ring(B) mm

Base-Ø (C) mm

Width(D) mm

Weight g

Breaking loag kg

39.810.01 ROXXS-C Carbon fibre 3 20 30 3 3.0 75

39.810.02 ROXXS-GF Glass fibre 3 20 30 3 3.0 75

39.811.01 ROXS-C Carbon fibre 3 30 40 3 5.9 150

39.811.02 ROXS-GF Glass fibre 3 30 40 3 5.9 150

C

AB

ROPEYE Loop pad eye for deck attachmentCarbon and textile deck attachments for indoor and outdoor applications. Loops must always be used with Ropeye TDP.Loops are used as stick-on’s on a sanded surface to glue the loops to. For elastic gluing: SIKAFLEX 291i 65.289.XX. Ropeye SLR complements the Ropeye Loop range. (TDP and SLR not included).

Pad-eye | Loops | Carbon

Code Ropeye Code

Material Rope(A) mm

Ring(B) mm

Base Ø(C) mm

Weightg

Breakingload kg

39.813.01 ROL40-4 Carbon 4 40 50 15 80039.813.02 ROL60-4 Carbon 4 60 50 16.5 80039.813.03 ROL80-4 Carbon 4 80 50 17 80039.813.04 ROL40-5 Carbon 5 40 50 15.5 145039.813.05 ROL60-5 Carbon 5 60 50 16.5 145039.813.06 ROL80-5 Carbon 5 80 50 17.5 145039.813.07 ROL40-6 Carbon 6 40 60 27.5 195039.813.08 ROL60-6 Carbon 6 60 60 28 195039.813.09 ROL80-6 Carbon 6 80 60 30.5 1950

ROPEYE Pro Loop pad eye for deck attachment

Carbon and textile deck attachments for indoor and outdoor applications. Loops must always be used with Ropeye DTDP for maximum performance. Loops are used as stick-on’s on a sanded surface to glue the loops to. Ropeye SLR complements the Ropeye Pro Loop range. (TDP and SLR not included).


Code RopeyeCode

Material Rope(A) mm

Ring(B) mm

Base Ø(C) mm

Weight g

Breaking load kg

39.815.01 ROPRO50/40-4 Carbon 4 40 50 17.5 110039.815.02 ROPRO50/60-4 Carbon 4 60 50 18.5 110039.815.03 ROPRO60/80-6 Carbon 6 80 60 32 220039.815.04 ROPRO70/120-8 Carbon 8 120 70 55 3500

ROPEYE TDP stick-on bushing for linesRopeye Through Deck Pushing is designed to protect the deck in the making of any thru-deckapplication for lines, halyards and sheets.


Code Ropeye Code

Material Head-Ø(A) mm

Inside Ø (B) mm

Outside Ø (C) mm

Length(D) mm

Weight g

39.817.01 ROTDP12 Anodised aluminium 28 8 12 30 8.239.817.02 ROTDP14 Anodised aluminium 30 10 14 30 1039.817.03 ROTDP16 Anodised aluminium 32 12 16 30 11.539.817.04 ROTDP18 Anodised aluminium 34 14 18 30 12.3

4

https://65.289.xx/

https://65.289.xx/

New

s Novem



ROPEYE Double TDP bushings for lines

Double TDP is adjustable in thickness and strengthens the deck/walls/bulkheads and protects themagainst abrasion. Recommended for Ropeye Pro Loop.


Code Ropeyecode

Material Head-Ø(A) mm

Inside Ø (B) mm

Outside Ø (C) mm

Length(D) mm

Weight g

39.818.01 ROTDP10/10-12 Anodised aluminium 32 9.5 16 10-12 12.5

39.818.02 ROTDP10/12-16 Anodised aluminium 32 9.5 16 12-16 13


39.818.04 ROTDP10/22-30 Anodised aluminium 32 9.5 16 22-30 16.5


39.818.06 ROTDP14/10-12 Anodised aluminium 40 12 20 10-12 22.5


39.818.08 ROTDP14/16-22 Anodised aluminium 40 12 20 16-22 26








ROPEYE SLR low-friction rings

Ropeye Self-Locking Rings are low-friction rings for indoor and outdoor applications. Made of anodised aluminium, they are specially designed to let lines, halyards and sheets slide insidethe ring channel.

Pad-eye | Loops | Rings | Carbon

Code RopeyeCode

Material Outside (A) mm

Inside(B) mm

Width(C) mm

Ring(D) mm

Weight g

Breaking load kg

39.819.01 ROSLR7-10 Aluminium 7 10 11 24 5 800

39.819.02 ROSLR10-14 Aluminium 10 14 15 34 13 1600

39.819.03 ROSLR14-20 Aluminium 14 20 20 46 30 3200

39.819.04 ROSLR20-28 Aluminium 20 28 31 70 120 6400

39.819.05 ROSLR28-38 Aluminium 28 38 44 99 290 10000

39.815.xx 39.818.xx 39.819.xx

Complete ROPEYE - schematic for the use of a ROPEYE product

Pro Loop (39.815.xx) + Double TDP (39.818.xx) + SLR ring (39.819.XX).

Pro Loop | Double TDP | Rings | SLR | Pad-eye |

Pro Loop Double TDP mm SLR (A-B) Ring 7 - 10 Ring 14 - 20 Ring 20 - 28

39.815.01 39.818.02; 39.818.03; 39.818.04 39.819.01 - -

39.815.02 39.818.02; 39.818.03; 39.818.04 39.819.01 - -

39.815.03 39.818.07; 39.818.08; 39.818.09 - 39.819.03 -

39.815.04 39.818.12; 39.818.13; 39.818.14 - - 39.819.04

ROPEYE Eyestrap

Ropeye Eyestrap is a inside fastening point easy to install and very compact in size. For elastic gluing: SIKAFLEX 291i 65.289.XX.


Code Ropeye Code

Material Radiusmm

Lengthmm

Widthmm

Weight g

Breaking load kg

39.822.00 ROSOE Carbon 9 50 14 2 35

25

https://39.815.xx/

https://39.818.xx/

https://39.819.xx/

https://39.815.xx/

https://39.818.xx/

https://39.819.xx/

https://65.289.xx/

New

s N

ovem

ber

2

News November2021


3

3.30

1.02

/03/

04/0

5

3

3.30

1.52

/53/

54/5

5

FENDERTEX inflatable cylindrical fender

PATENT SPACE SAVING LIGHTNESS

The inside is resistant to compression and tensile strength, outside made of fabric. Resistant, lightweight, handy, once deflated the fender rolls up to save space on board. Dope-dyed yarn very resistant to UV rays.Sturdy fabric that doesn’t leave traces or scratches on the hull.

Buoys | Inflatable buoys | FENDERTEX

Model Colour Ø cmcm

black dark grey

C73 33.301.02 33.301.52 25 70 0.8

C84 33.301.03 33.301.53 30 80 1

C104 33.301.04 33.301.54 34 100 1.5

C124 33.301.05 33.301.55 36 200 2.2


Its patented design technique gives the fender extreme resistance to compression and traction

FENDERTEX inflatable spherical fender


The inside is resistant to compression and tensile strength, outside made of fabric. Resistant, lightweight, handy, once deflated the fender rolls up to save space on board. Dope-dyed yarn very resistant to UV rays.Sturdy fabric that doesn’t leave traces or scratches on the hull.


Model Colour Ø cm

black dark grey

S60 33.302.01 33.302.51 43 1.2

S70 33.302.02 33.302.52 50 1.6


FENDERTEX inflatable tubular fender


The inside is resistant to compression and tensile strength, outside made of fabric.Resistant, lightweight, handy, once deflated the fender rolls up to save space on board. Dope-dyed yarn very resistant to UV rays.Sturdy fabric that doesn’t leave traces or scratches on the hull.


Model black cm

T124 33.303.05 120x36 2.4


6

New

s Novem



Foldable 2-stage electrical table pedestal

ELECTRIC Made of anodized aluminium with parts for indoor and outdoor installation.

To be recessed into the floor, upper plate fitted with 0/90° swivelling systemof the table.

A 6-pole switch is needed to reverse polarity and operate the pedestals.

Height and colours can be customized for minimum orders of at least 10 pcs.

90° SWIVELING

Table pedestals

Code V No. of heights

MaxA

Speed Height when

folded mm

Height when

open mm

Base plate mm

Table plate mm

Max loadkg

48.745.12 12 2 10 9-12 mm/sec 450 820 270 270 10048.745.24 24 2 5 9-12 mm/sec 450 820 270 270 100

5

0.55

8.40

5

0.55

8.41

5

0.55

8.41

IGLOO BMX icebox IGLOO | Stiff iceboxes

Code Volumel

Model Drain plug

UV Protection

Reinforced hinges

Lock Ice retention days*

cm

50.558.40 23 BMX 25 Yes No Yes RubberT lock 4 51x33.5x

41.5 H 4.7

50.558.41 49 BMX 52 Yes No Yes RubberT lock 5 67x41.5x

42 H 7.4

* Days of ice retention at an external temperature of 32°CAvailable as of January 2022

Oleophilic sponge to absorb hydrocarbons and their derivates

In case of oil-polluted water (in the bilge, in the engine room, etc.), this sponge rapidly absorbs the oilwithout soaking with water. This prevents dumping the bilge content into the sea and consequently reduces the quantity of wasteproduced when using traditional cloths and/ore disposable absorbing cloths.

To be used during routine operations when oil leaks into the water are frequent.

With this innovative product both pleasure boaters and professional sailors will recover the smallestleak and will contribute to water and environment protection.

This sponge absorbs 30 times its weight of hydrocarbon without absorbing water.

Made of a patented type of highly hydrophobic polyurethane foam, this sponge can be used over andover up to 200 times.

Oleophilic sponges

Code Description Content Ideal for

65.215.01 Ocean Cleaning Kit

2 x 25x10-cm 2.5-cm H absorbing sponges; 1 x 35x25-cm 1-cm H absorbing sponge;

3 x zipped poaches; 2 x pairs of nitrile gloves; 1 x nylon bag.

Pleasure boaters who wishto keep onboard an all-inclusive

easy-to-use kit

65.215.02 OCK Spugne ricambio

2 x 25x10-cm 2.5-cm H absorbing sponges; 1 x 35x25-cm 1-cm H absorbing sponge

New or supplementing kit. Sold in a display package that can be hung

65.215.03 OCK Officine 12 x 25x10-cm 2.5-cm H absorbing sponges

Professional sailors, berthing facilities or large boats

27

New

s N

ovem

ber

2

News November2021


52.153.03 52.153.04

5

2.15

3.05

ABSODRY® moisture absorberThis dehydrating crystal moisture absorber draw moisture from the air to prevent mould and badodours.As the optimum level of humidity is reached, the process automatically stops resuming operationwhen humidity starts increasing again.Made up of two-part moisture absorber. Dehydrating crystals are placed in the upper part and moisture is condensed in the bottom part.When the easy-to-empty absorber is full and the crystal are consumed, start over with a new refill.ABSODRY® Hanger is the disposable version for confined places where ventilation is limited. Used in wardrobe is ideal to keep clothes and pulls fresh and dry.

Moisture absorbers

Code Description For mm

52.153.03 ABSODRY® Classic +450gr refill pack 10 - 12 m3 1 to 3 months 180x110x210

52.153.04 ABSODRY® 3 x 450 gr refill packs 10 - 12 m 1 to 3 months very refill 145x145x145

52.153.05 ABSODRY® Hanger 450 gr 10 - 12 m3 60x205x335

Duration is just an indication and depends on the air humidity level

VELCRO® Brand Plastic CoinsPVC coins with hook-and-loop fastening strip and central hole.To be paired with the buttonhole element of cushions and mattresses, both indoors and outdoors.

VELCRO | Adhesive systems

Code Colour Dimensions Application Type

65.456.01 White 45-mm Ø, 3-mm bore Tie, wrap, fasten BULK 1000 pcs

65.456.11 White 45-mm Ø, 3-mm bore Tie, wrap, fasten RETAIL 20 pcs

King StarBoard® sheetsThe original marine-grade high-density polyethylene sheet.The King name is synonymous with quality and the King StarBoard® brand has been helping prosbuild better boats for more than thirty-years.It is the product of a proprietary process called K-Stran™, the most advanced manufacturing processfor superior flatness and consistency. Matte finish on both sides of the sheet. It is environmentally stabilized to withstand the harshest outdoor conditions. It will not rust, delaminateor rot when exposed to UV, humidity or water. Possible applications:- Structural roofing.- Bulkheads in the bilge or the peaks.- Shelves.- Furniture.- Frames and finishings.- Hatches and doors.- Handles and rails.- Fishing rod holders and glass holders.- Steps and Dock Boxes.- Tray tables.

King StarBoard® | Polyethylene sheets | Sheets

Code Thickness mm Dimension mm Colour

65.908.01 12.5 800x1200 White

65.908.02 19 800x1200 White


66.449.11

66.449.12

GE BP-1 12V inflatorAutomatic stop when the adjustable preset pressure is reached.With a flow of 160 l/min, it inflates at a max pressure of 1200 mbar (18 psi).The hose/inflator screw-type connector is stable and safe.It comes in a shoulder carrying bag with all accessories: 1.7-m hose, 3-m power cable, lighter plugand 12V battery clamps.The standard version with bayonet fitting is ideal for SUP boards.

Electric inflators | Inflation | Deflation |

Code Functions V W Flowl/min

Max pressure Current draw A mm

OPTIONAL connections

66.449.11 Inflation 12 240 160 1200 mbar (18 PSI) 13 205x105x130 66.449.12

66.449.12 The spares kit includes an additional hose and several fittings to inflate kits, dinghies, liferafts, air mattres-ses and pool inflatables.

8

ai163534921648_ADV_OneFamily_ENG.pdf 1 27/10/2021 17:40:33

3

News November2021


0

News November 2021


31

3

News November2021


2

ai163534374222_III_Cop_adv-sito.pdf 1 27/10/2021 16:10:47

New products November 2021 - ENG - Osculati

Documents

Transcript of New products November 2021 - ENG - Osculati