Item - Salvex

Item Name Specification Unit Qty. Supplier Remarks Present 1 Drawworks Electric,single shift,stepless,gear transmission ,Input

power : 2000HP (1470KW ), W ire cable size : 1.1/2" (Ø38mm),Fast line pull force : 1,091,000lbs (485kn).

set 1 INTLEF Refurbishment Complete

1.1 Brake Hdyraulic Disc Brake, including control console etc. set 1 PSK Refurbishment 1.2 Auxiliary Brake Dynamic braking regenerative type,

Mdl.YY215.10.10,input speed 600r/min,mnf No. 3SJ091261-1

set 1 INTLEF Refurbishment

1.3 Safety Device

Crown-O-Matic, one standard on the drawworks set 1 INTLEF Refurbishment

1.4 AC Motor No. 1 Type : YJ31BX1, 800KW ,600V,968A,600r/min,30.5HZ,dim : 276x134x107".

set 1 YONGJI Refurbishment

1.5 AC Motor No. 2 Type : YJ31BX2, 800KW ,600V,968A,600r/min,30.5HZ,dim : 276x134x107".


1.6 Brake Cooling Device No.1

Anti-explode centrifugal fan for AC motor No.1, Flow 110m3/min,power 11kw,speed 2930 r/min,full press

3136Pa. Driven with 1 ea Elmot "Nanyang" type YB2-160M1-

2N,50HZ,11kw,380/360V,21,6/12,5A,2930 r/min,s/n. 8LFX423-26 (2009-2)


1.7 Brake Cooling Device No.2

Anti-explode centrifugal fan for AC motor No.1, Flow 110m3/min,power 11kw,speed 2930 r/min,full press

3136Pa. Driven with 1 ea Elmot "Nanyang" type YB2-160M1- 2W ,50HZ,11kw,380/360V,21,6/12,5A,2930

r/min,s/n. 7KW X136 (2008-12)


1.8 Automatic Feeder

Type : K167B-86.34-AP6/225-B31-070313, 56,27kw,1450rpm

set 1 Refurbishment

1.9 Motor For drive auto feeder, 3˜Motor : M2JA225M4A-W,50HZ,45kw,1480 r/min,84,7A,Prod Code :

36JA222301-BXC J41,Cert No. CNEX05.1179

set 1 ABB Refurbishment

2 Drilling Line Dia : 1.1/2" (38mm) , 6x19S IW RC,EIPS,Std ANSI/API Spec 9A- 2004,Length 1202Mtr,Licence No. XK05-05-

00033

set 1 JULI Brand New AOG

3 Driller Console Type : 5ZF-ZJ90D includes eletric, hydraulic, gas control valves and Seimens PLC; monitor TV, digital

design.Glass must be A- 60 armored glass (Break proof).

set 1 JIANGHAN Refurbishment Complete

4 Mast Centilever type,4 section, Max rated static hookload : 1,300,000lbs (5850kN), Height : 152ft (46,5Mtr), Base span : 29ft-6.5/16", Top span (face/side) : 8ft-6.3/8"/8ft-

10.1/2", Racking platform work height : 1st : 26,5m (87ft), 2nd : 26m (85,3ft), 3rd : 25,5m (83,7ft), 4th : 25m

(82ft), 5th : 24,5m (80,4ft), Rated capacity of pipe racked : 24803ft, Full pipe setback pull hookload : 32Knots (16,5m/s), Full pipe setback pull RT load :

32Knots (16,5m/s), No.Except (full pipe setback full RT load) : 60 Knots (30,7m/s), Except (full RT load) : 75

Knots(38,6m/s), Mast Raising and lowering : 32 Knots (16,5m/s), Caution : Acceleration or impact also setback

& wind loads will replice the maximum rated static hookload capacity, total weight : 244,406 lbs

(110,863kg)


4.1 Adjustable Racking Board

Racking board design for 260 stands set 1 INTLEF Refurbishment Complete

4.2 Hydraulic Bumper Device

set 2 Refurbishment Complete

4.3 Air Winch at Racking Platform

Pneumatic winch,first rope max lifting traction 5KN,rate air press

0,8 Mpa,W eight 5kg

set 2 JULING Brand New AOG

4.4 Racking Platform escape device

Mdl. RG10-D with Descent height 55m, Max descent height

100m/130kg,Descent velocity 2,0m/s

set 1 Brand New AOG

4.5 Climbing Assistor


4.6 Mast transport frame

pc 8 INTLEF Refurbishment Complete

4.7 String line guider set 6 Refurbishment Complete

4.8 Casing Stabing Board

Adjustable, 20ft stroke,air operated set 1 TENGDA Brand New IN PROGRESS

4.9 Electric line roller Mdl. DDS-14/5-7,speed 0-5r/min,Torque 13,000 N.M,Motor power 7,5kw,work voltage 380v,max load

14.000kg

set 1 TENGDA Refurbishment Complete

4.10 Jack 11,000lbs, LF 100,63MPa,100mm set 2 Brand New AOG

4.11 Hydraulic Line Cutter

Mdl. YB-48 set 1 Brand New AOG

5 Crown Block Maxumum Hook load 4500KN, Diameter of drilling line 38mm (1.1/2"), Diameter of sheave 1524mm, Number

of sheave 6, Diameter of fastline sheave 1524mm, number of fastline sheave 1, diameter of auxiliary sheave 400mm, number of auxiliary sheave 4. API

SPEC 4F 8A


6 Dead line anchor

Model JZG41,max load 410KN,API Spec 8CPSL1, API 8C-0123

set 1 JIANGHAN Refurbishment Complete

7 Dead line guided Mdl. XW 32-70,Type ZL99213431.9, all automatic and confining type setting-Rope machine


8 Stand pipe 4" x 7500psi, Dual stand pipe. set 1 YANCHENG Brand New IN PROGRESS

9 Kelly Hose 4" ID x 62ft (19m) 7,500psi W P, class D set 1 JINGBO Brand New AOG 10 Kelly Hose 4" ID x 75ft (23m) 7,500psi W P, class D set 1 JINGBO Brand New AOG 11 RIG

SUBTRUCTURE Self elevating 30' height clearance below rotary beams,

Max rated static hookload : 1,300,000lbs (5850kN), Max rated static rotary capacity :

1,300,000lbs (5850kN), Max rated pipe setback capacity : 800,000lbs (3600kN), Max cleaned rated

static hookload & rated setback capacity : 2,100,000lbs (9450kN), Max cleaned rated static rotary & rated setback capacity : 2,100,000lbs (9450kN), Max

rated design wind velocity with rated capacity of pipe racked : 32 Knots (16,5m/s), Max rated design wind velocity without pipe racked : 75 Knots (38,6m/s),

Height : 10,5Mtr (34ft), Structural safety level : E2/U2, API Spec 4F third edition with certificate No. 4F-0148.


11.1 BOP Handling System

2x30 ton hoist and two additional dollies for safety chain hang off

set 1 BAOYE Brand New IN PROGRESS

11.2 Air Winch ( Air Hoist ) No. 1 ( Install on Rig

Floor )

Mdl. XJFH-5/35, air pressure 72-130psi (0,5 - 0,9 Mpa), power 15kw, max load 5,5 US Ton (50kN), velocity 35,

Dia of strand 5/8" (16mm), volume 393ft (120mtr), weight 620kg (1370lb)



Floor )





Floor )




11.5 Cat Walk set 2 INTLEF Refurbishment Complete

11.6 Pipe Rack pc 8 INTLEF Refurbishment Complete

11.7 Cable tray set 1 INTLEF Refurbishment Complete

11.8 Mud Bucket Range 5" - 3.1/2",Dim 73x32x20", 140kg pc 1 RUSHI Brand New AOG 11.9 Mouse hole pc 1 INTLEF Brand New AOG

11.10 Rat hole pc 1 INTLEF Brand New AOG

12 Traveling block Maximum Hook load 4500KN, Diameter of drilling line 38mm (1.1/2"), diameter of sheaves 1524mm, number

of sheaves 6, API 8A


13 Hook Mdl : DG-450 with Load rating 500 us ton, spring travel 7.7/8",Dim 116,3x35x344",API Spec 450 8A-0058

set 1 LS Refurbishment Complete

14 Rotary table Rotating load capacity 644tons (585mt),opening 37,5",rotary speed 0-300RPM


14.1 AC motor Type : YJ31BX1, 800KW ,600V,968A,600r/min,30.5HZ,dim : 276x134x107".


14.2 Motor drive coupler

Independent drive gear box with 400kw (600hp),980rpm,ratio I 2043,ratio II 1059

set 1 CHINA Refurbishment

14.3 Independent rotary drive skid


14.4 Bushing for 7" casing

SIZE 2.3/8" - 8.5/8" set 1 INTLEF Refurbishment

14.5 Bushing for 9.5/8" casing


14.6 Bushing for 13.3/8" casing


14.7 Bushing for 20" casing

SIZE 22.1/2" set 1 INTLEF Refurbishment

15 Swivel Mdl. SL450-5 with Double finction, Load rating 500ton,5000psi WP,rate spinning moment

3000N.M,300r/min max speed,dim : 3015Lx1096Wx1065mmH, weight 3060kg c/w

gooseneck & quick change with 6.5/8" Reg L.H. connection. API SPEC 8A

set 1 LS Refurbishment Complete

16 Kelly spinner set 1 Brand New IN PROGRESS

17 Roller kelly bushing

Mdl. 27-HDP, type Heavy,API Spec 7K-0079,dim 24.5"Lx24.5"Wx29.5"H for Kelly size 5.1/4"


18 Roller kelly bushing

Mdl. 27-HDP, type Heavy,API Spec 7K-0079,dim 24.5"Lx24.5"Wx29.5"H for Kelly size3.1/2"


19 Kelly Hexagonal 3.1/2" OD, 1.3/4" ID with NC-38 Connection x 40ftLong, weight 601kg

set 1 UNUSE Complete

21 Upper kelly cock 6.5/8" Reg LH Connections, 10,000psi set 2 Brand New IN PROGRESS

22 Lower kelly cock NC38 RH Connections, 10,000psi, 4.1/2" set 1 Brand New IN PROGRESS

23 Lower kelly cock NC38 RH Connections, 10,000psi, 3.1/2" set 1 Brand New IN PROGRESS

24 Elevator link Length 180", 350 T, DH350 pair 1 Refurbishment Complete

25 Elevator link Length 180", 500 T, DH500 pair 1 Refurbishment Complete

26 Elevator link Length 240", 350 T for casing LSDH350 pair 1 LS Refurbishment Complete 27 Hydraulic

catheads n0. 1 Mdl. YM-16D,flow rate 120L/min,pull stroke

1.2m,press 1 Mpa,pull 1.6x10uN

pc 1 TENGDA Brand New IN PROGRESS

28 Hydraulic catheads n0. 2

Mdl. YM-16D,flow rate 120L/min,pull stroke 1.2m,press 1

Mpa,pull 1.6x10uN

pc 1 TENGDA Brand New IN PROGRESS

29 Integrated hydraulic power

station for drawworks brake

Stabdard model,electric,air cooled with rate pressure 8MPa, temp -10° ~ 60° C,control voltage

380V,summer HM46,winter HV32,weight 750kg & tank capacity 10L

set 1 PSK Refurbishment Complete

30 hydraulic power unit

Mdl. TDYZ160/16-8B with rate pressure 16MPa,flow rate

160L/min,motor power 45 15kw,rate speed 1470r/min,oil cubage 800L

set 1 BAOYE Brand New AOG

31 VFD system no. 1

VFD control room, Main Switchboard, Generator Control / Powerlimitation, 600V Motor Control Center,

460V Motor Control Center, Transformers, Air Conditioner VFD Unit, Eddy Current brake control

system, 400V / 230V Small Power & Lighting Board

set 1 BAODE Refurbishment Complete

32 VFD system no. 2

VFD control room, Main Switchboard, Generator Control / Powerlimitation, 600V Motor Control Center,

460V Motor Control Center, Transformers, Air Conditioner VFD Unit, Eddy Current brake control

system, 400V / 230V Small Power & Lighting Board

set 1 BAODE Refurbishment Complete

33 diesel engine Cat C15 with AR & OEM No. 286-4915,Max 3000m,Alt 9842,full load stastic fuel 15,full torque static fuel -

22,rate 668HP,488kw at 1500RPM,idle 1621 RPM c/w starte motor 1 ea (p/n. 207-1564 CW 24 Volt), 1 ea

Water pump 5N5692 & 2 Ea Battery 12 Volt "Bolder"

set 1 Caterpillar Refurbishment Complete

34 air compressore Mdl. MV-10-10 with capacity 1.0 m/min, pressure 1.0 mpa,axis power 7.5kw,speed 860 rpm,dim :

1600x600x860mm,weight 350kg

set 1 Brand New IN PROGRESS

35 sullair refrigeration

Mdl. SRG240 with 6,6NM3/min,7.7A,230v,50hz,60° C,1,2mpa,R-22

set 1 SULLAIR Brand New AOG

drayer 36 sullair rotary

screw air compressore

Mdl. LS12 50HH AC SULL, with BOM no. 88290003-748,197,6CFM,145PSI,5,6m3/min,1,0 mpa, 1,07

mpa,50hz,37kw,1475rpm,dim : 1829Lx1219Wx1581H, 1280kg weight

set 1 SULLAIR Refurbishment Complete

37 sullair rotary screw air

compressore

Mdl. LS12 50HH AC SULL, with BOM no. 88290003- 748,197,6CFM,145PSI,5,6m3/min,1,0 mpa, 1,07

mpa,50hz,37kw,1475rpm,dim : 1829Lx1219Wx1581H, 1280kg weight

set 1 SULLAIR Refurbishment Complete

38 diesel engine no. 1

CAT 3512, with AR no. 2120324,perf spec OK6367,rotating CCW,max ALT

1500m,1310kw,1500rpm,idle 1515rpm,ECM software 3050815,injector 2501306,turbo 2598424, Product No.

CAT00000APTM01210

set 1 Caterpillar Maintenance Complete

39 generator set no. 1

Mdl. SR4B,1900kva,600volt,1828amps,3phase,50hz, with arrangement no. 199-6794


40 diesel engine no. 2



CAT00000LPTM01211





42 diesel engine no.3



CAT00000HPTM01212








CAT00000CPTM01320








CAT00000HPTM01209





48 generator room skid

FOR ALL GENSET set 6 INTLEF Refurbishment Complete

49 TOP DRIVE UNIT

Mdl. DQ90BSC/07168 set 1 BPM Refurbishment IN PROGRESS

49.1 rail for top driver set 1 BPM Refurbishment 49.2 top drive

container Steel contaner for top drive unit set 1 BPM Refurbishment

49.3 top drive hydraulic power

station

set 1 BPM Refurbishment

49.4 top drive container

Steel contaner for cable & etc set 1 BPM Refurbishment

49.5 top drive tds power supply

for electric power supply to top drive unit set 1 BPM Refurbishment

50 MUD PUMPS NO. 1

Type F-1600, with 1600Hp (1193KW), 3000psi,120r/min,gear ratio 4206:1 with liner

sizemm/Press psi : 180/3345,170/3750,160/4235,150/4820, 140/5075.

set 1 BOMCO Refurbishment Complete

50.1 AC motor mud pump#1 no. 1

Type YJ31BX4 with 800kw,600v,968A,600r/min,30.5HZ,winding

connection Y


50.2 AC motor cooling device

mud pump#1 no.

Anti-Explode Centrifugal Fan, with flow 110m3/min,power 11kw,full press

3136Pa,speed 2930r/min, Drive with Electric motor


1 YB2-160M1-2W 11kw,380/660v,21,5A,2930r/min,50HZ,s/n.

7KWX136-26) 50.3 AC motor mud

pump#1 no. 2 Type YJ31BX3 with

800kw,600v,968A,600r/min,30.5HZ,winding connection Y



mud pump#1 no. 2


3136Pa,speed 2930r/min, Drive with Electric motor YB2-160M1-2W

(11kw,380/660v,21,5A,2930r/min,50HZ,s/n. 7KWX136-26)


50.5 centrifugal water pump for mud

pump#1

Centrifugal Water pump drive with Type YB2100L1-4 with

2,2kw,380/660v,1420r/min,5.0A,50HZ (s/n. 05380)

set 1 Brand New AOG

50.6 oil supply pump for mud pump#1

Type : YB2 1001L-4, 2,2kw,380v,Y conn,1420r/min,5.2A,50HZ c/w pressure

gauge 0-200psi

set 1 Brand New AOG

50.7 pulsation dampener mp#1

Type KB-75, with volume 75Ltr,Max charge pressure 350 bar (35Mpa),Max precharge press 45 bar (4,5Mpa)


50.8 pressure relief valve for mud

pump#1

Type JA-3 Shear relief valve, with inlet 3.1/2",outlet 3"NPT

set 1 CHINA Brand New AOG

50.9 pressure gauge for mud pump#1

0-87 PSI X 10² set 1 CHINA Brand New AOG

50.10 centrifugal charging pump

for mud pump#1

Mdl. HCP8X6X14-14", with discharge head 33-35m,discharge capacity

280m3/h,75KW,1450r/min,1150kg weight, Drive with Electric Motor type YB2-280S-

4W,75kw,380/660V,140/80.8A,50HZ,1480r/min,595kg weight & s/n. 1456.


51 MUD PUMPS NO. 2


sizemm/Press psi :180/3345,170/3750,160/4235,150/4820, 140/5075.




connection Y



mud pump#2 no. 1







connection Y



mud pump#2 no. 2



(11kw,380/660v,21,5A,2930r/min,50HZ,s/n. 91FX036-19)



pump#2


2,2kw,380/660v,1420r/min,5.0A,50HZ (s/n. 05379)

set 1 Brand New AOG



gauge 0-200psi

set 1 Brand New AOG





pump#2








for mud pump#2 280m3/h,75KW,1450r/min,1150kg weight, Drive with Electric Motor type YB2-280S-


52 MUD PUMPS NO. 3


sizemm/Press psi :180/3345,170/3750,160/4235,150/4820, 140/5075.




connection Y



mud pump#3 no. 1







connection Y



mud pump#3 no. 2



(11kw,380/660v,21,5A,2930r/min,50HZ,s/n. 91FX036-19)



pump#3


2,2kw,380/660v,1420r/min,5.0A,50HZ (s/n. 05379)

set 1 Brand New AOG



gauge 0-200psi

set 1 Brand New AOG





pump#3






for mud pump#3


280m3/h,75KW,1450r/min,1150kg weight, Drive with Electric Motor type YB2-280S-



53 suction line 10" - 12" INCLUDING EXPANSION JOINT set 1 Brand New IN PROGRESS

54 flow line 12" FLOW LINE set 1 Brand New IN PROGRESS

55 SHALE SHAKER TANK

( MUD TANK NO. 1 )

Square Tank, with 3 Compartment (sand trap,degasser, & Desander Compartment) c/w

roof,walkways,stairs & folding handrails,cleanout gates,discharge ditch connection,cutting discharge

chute,bottom string mud guns,suction connection to desander,desilter & mud cleaning pumps

set 1 INTLEF Brand New IN PROGRESS

55.1 remove gas charge pump (

install on shaker tank )

Centrifugal sand pump,Mdl.HCP8x6x14-14",discharge head 33-35m,75kw,280m3/h,1450r/min, driven with

Elmot "Xiangsu" type YB2-2805-4W,75kw,380/660V,50HZ,(s/n : 1457 ) date : 2009-10

set 1 CHINA Brand New IN PROGRESS

55.2 charging pump on shaker tank

Centrifugal sand pump,Mdl.HCP8x6x14-14",discharge head

33-35m,75kw,280m3/h,1450r/min, driven with Elmot "Xiangsu" type YB2-2805-

4W,75kw,380/660V,50HZ,(s/n : 1460 ) date : 2009-10


56 INTERMEDIATE TANK/MIDDLE TANK ( MUD TANK NO. 2 )

Square Tank, with total capacity 75m3 & 3 Compartment (Desilter,Contrifuge1 & 2 Compartment), c/w roof,walkways,stairs & folding handrails,cleanout gates,discharge ditch connection,cutting discharge chute,bottom string mud guns,Mixing & suction


line...",mixing & discharge line...",shearing & suction line..",shearing & discharge line.." & Stell box for cable

line 56.1 agitator no. 1

( install on mud tank no. 2 )

Mdl. HA-11 with rotary speed 58r/min,fan diameter 1000mm,fan no. 4,power rate 11kw. Drive with electric

motor type YB2-160M-4W,11kw,380/660v,22,3/12,9A,50hz,1460r/min (s/n. 5537) 134kg & 1 ea electric panel box type BXPG56-

1D45,380V,4,0A


56.2 agitator no. 2 ( install on mud

tank no. 2 )


motor type YB2-160M-4W,11kw,380/660v,22,3/12,9A,50hz,1460r/min (s/n.

1956.B) 134kg & 1 ea electric panel box type BXPG56-1D45,380V,4,0A



tank no. 2 )



1D45,380V,4,0A


56.4 dws series multi-use submersible pump 1 (install

on mud tank no. 2)

For Centrifuge No. 1 with Mdl. DYWS 60-12,1450rpm,60m3/h,lift 12m,7,5kw.

set 1 FEIDA Brand New IN PROGRESS

56.5 dws series multi-use submersible pump 2 (install

on mud tank no. 2)

For Centrifuge No. 2 with Mdl. DYWS 40-12,1450rpm,60m3/h,lift 12m,7,5kw.


56.6 centrifugal sand pump (install on mud tank no. 2)

Mdl. HCP8x6x14-14",with discharge head 33-35m,75kw,280m3/h,1450r/min,65% eeciency,Driven

with Elmot type YB2-280S-4W,75kw,380/660V,140/80,8A,50HZ


57 SUCTION TANK ( MUD TANK

NO. 3 )

Square Tank, with total capacity 75m3 & 3 Compartment c/w roof,walkways,stairs & folding

handrails,cleanout gates,discharge ditch connection,cutting discharge chute,bottom string mud

guns,Mixing & suction line...",mixing & discharge line...",shearing & suction line..",shearing & discharge

line.." & Stell box for cable line



tank no. 3 )



1D45,380V,4,0A



tank no. 3 )



4964B) 134kg & 1 ea electric panel box type BXPG56-1D45,380V,4,0A



tank no. 3 )



1D45,380V,4,0A


58 PILL TANK 20 Barrel capacity set 1 INTLEF Brand New IN PROGRESS

59 MIXING TANK ( MUD TANK NO.

4 )

Square Tank, with total capacity 75m3 & 3 Compartment, c/w roof,walkways,stairs & folding






tank no. 4 )



1D45,380V,4,0A



tank no. 4 )






tank no. 4 )





60 PRE MIXING TANK ( MUD TANK NO.5)

Square Tank, with total capacity 40m3 & 2 Compartment & hopper skid, c/w roof,walkways,stairs

& folding handrails,cleanout gates,discharge ditch connection,cutting discharge chute,bottom string mud guns,Mixing & suction line...",mixing & discharge line...",shearing & suction line..",shearing & discharge




tank no. 5 )






tank no. 5 )



1D45,380V,4,0A


60.3 mud mixing pump/centrifugal sand pump no. 1 (install on mud

tank no. 5)


with Elmot type YB2-280S-4W,75kw,380/660V,140/80,8A,50HZ (s/n.

1450)


60.4 mud mixing pump/centrifugal sand pump no. 2 (install on mud

tank no. 5)


with Elmot type YB2-280S-4W,75kw,380/660V,140/80,8A,50HZ (s/n.

1452)


60.5 shearing device / mud mixing

pump/centrifugal sand pump no. 3 (install on mud

tank no. 5)

Polymer shearing device to mix polymer type mud materials, Mdl. HSP6x5,with discharge head

45m,Discharger cap 150m3/min,in-out diameter 150x125mm,2200r/min,65% eeciency,Driven

with Elmot type YB2-280S-4W,75kw,380/660V,140/80,8A,50HZ (s/n. 1451)


61 STORAGE TANK

(RESERVE TANK) NO. 1 ( MUD TANK NO.

6 )

Square Tank, with total capacity 75m3 & 3 Compartment , c/w roof,walkways,stairs & folding






tank no. 6 )






tank no. 6 )


motor type YB2-160M-


4W,11kw,380/660v,22,3/12,9A,50hz,1460r/min (s/n. 4953B) 134kg & 1 ea electric panel box type BXPG56-

1D45,380V,4,0A 61.3 agitator no. 14






62 STORAGE TANK


7 )

Square Tank, with total capacity 75m3 & 3 Compartment , c/w roof,walkways,& folding

handrails,cleanout gates,discharge ditch connection,cutting discharge chute,bottom string mud guns,Mixing & suction line12",mixing & discharge line

4",shearing & suction line 6",shearing & discharge line.." & Stell box for cable line



tank no. 7 )



1D45,380V,4,0A



tank no. 7 )



1D45,380V,4,0A



tank no. 7 )





63 STORAGE TANK


8 )

Square Tank, with total capacity 75m3 & 3 Compartment , c/w ,walkways,& folding

handrails,(without roof), cleanout gates,discharge ditch connection,cutting discharge chute,bottom string mud guns,Mixing & suction line12",mixing & discharge line




tank no. 8 )



1D45,380V,4,0A



tank no. 8 )



1D45,380V,4,0A



tank no. 8 )



1D45,380V,4,0A


64 STORAGE TANK


9 )

Square Tank, with total capacity 75m3 & 3 Compartment , c/w ,walkways,& folding

handrails,(without roof), cleanout gates,discharge ditch connection,cutting discharge chute,bottom string mud guns,Mixing & suction line12",mixing & discharge line




tank no. 9 )


motor type YB2-160M-


4W,11kw,380/660v,22,3/12,9A,50hz,1460r/min (s/n. 7005) 134kg & 1 ea electric panel box type BXPG56-

1D45,380V,4,0A 64.2 agitator no. 22




1D45,380V,4,0A



tank no. 9 )





65 TRIP TANK Square tank with capacity 50 Barrel, separate from system, c/w walkways,folding handrails (without

roof),cleanout gate,discharge ditch connection & steel box for cable line


65.1 agitator no. 30 ( install on trip

tank )



1D45,380V,4,0A


65.2 agitator no. 31 ( install on trip

tank )



1D45,380V,4,0A


65.3 centrifugal sand pump no. 1

(install on trip tank)

Mdl. HCP4x3x13-11",with discharge head 26-32m,11kw,60m3/h,1450r/min,Driven with Elmot type

YB2-160m-4W,75kw,380/660V,22,3/12,9A,50HZ (s/n. 7217)


65.4 centrifugal sand pump no. 2

(install on trip tank)

Mdl. HCP4x3x13-11",with discharge head 26-32m,11kw,60m3/h,1450r/min,Driven with Elmot type

YB2-160m-4W,75kw,380/660V,22,3/12,9A,50HZ (s/n. 7218)


66 scalping shale shaker no. 1

Mdl No. FLC2000 3 Panel, P/L No. 5339-00-035,Dwg No. 14495, Cust ID 07/29/08,Unit No. MA012438, c/w eledctric Start/Stop panel, 2 Ea Super G Vibrator motor

1500rpm,50hz,3phase,2,5HP,Mdl No. SGX-44-15-380/400-5-001 (s/n.SG-12496 & SG-12495 )

set 1 DERRICK Corp

Buffalo. NY.USA

Refurbishment Complete

67 scalping shale shaker no. 2

Mdl No. FLC2000 3 Panel, P/L No. 5339-00-035,Dwg No.14495, Cust ID 07/29/08,Unit No. MA012820, c/w electric Start/Stop panel, 2 Ea Super G Vibrator motor

1500rpm,50hz,3phase,2,5HP,Mdl No. SGX-44-15-380/400-5-001 (s/n.SG-13158 & SG-13157 )

set 1 DERRICK Corp

Buffalo. NY.USA


68 shale shaker no. 3

Mdl No. FLC2000 3 Panel, P/L No. 5339-00-035,Dwg No.14495, Cust ID 07/29/08,Unit No. MA012434, c/w

Start/Stop panel, 2 Ea Super G Vibrator motor 1500rpm,50hz,3phase,2,5HP,Mdl No. SGX-44-15-

380/400-5-001 (s/n.SG-12494 & SG-12493 )

set 1 DERRICK Corp

Buffalo. NY.USA


69 degasser (install on shaker

tank no. 2)

Mdl. VACU-FLO 1200 DEGASSER, P/L No. 10667-02-012,Cust ID 02/14/08,Unit No. DG000597,DWG No.

10310-00-009, c/w Start/Stop panel, Air Compressore "Ingersoll Rand" mdl No. V255

(s/n.7054378) drive with Elmot "Baldor" 7,5hp,230/460v,20.4A,1760rpm,60/50HZ,3phase (s/n.

BX697496)

set 1 DERRICK Corp

Buffalo. NY.USA

Refurbishment IN PROGRESS

70 mud cleaner (install on

intermediate tank/midle tank

no. 2)

Mdl No. FLC 2000 4 panel, P/L No. 9780-00-042,Unit No. MA13717, c/w Star/Stop panel, 2 Ea Super G

Vibrator moto Mdl. SGX-55-15380/400-5-001 (s/n. SG-14353 & SG-14552) c/w 3x10" Desander Cones with capacity 1500gpm (s/n. AD004671) & 20x4" Desilter

Cones with capacity 1600gpm (s/n. AD004670)

set 1 DERRICK Corp

Buffalo. NY.USA


71 centrifuge no. 1 Mdl. GLW 355-1250 NA,capacity 40m3/h,with main motor type YB2-2255-


4, 75kw,380v,69,9A,50hz,1480r/min (s/n. 0185) & Auxiliary Motor 7,5kw

72 centrifuge no. 2 Mdl. LW 600-945 NA,capacity 60m3/h,with main motor type YB2-2255-4, 75kw,380v,69,9A,50hz,1480r/min

(s/n. EA0200) & Auxiliary Motor 7,5kw


73 DIVERTER Mdl. FFZ75-3.5, Bore 29.1/2", working pressure 500psi (3,5MPa),temp class T-20-29° ~ 121° C, rated control pressure 2300 psi, commended operating pressure ≤

1500psi, assy Dim 2095x1760mm (8.1/2"x69.1/4"), Licence No. XK14-209-00007, Trim H2S,

Executive standard Q/HEJ099-2001, p/n. RS11156.00


73.1 diverter spool Bore 29.1/2" 500Psi set 1 INTLEF Refurbishment Complete 73.2 manual &

hydraulic ball valve

Bore 29.1/2" 500Psi set INTLEF Brand New IN PROGRESS

74 ANNULAR BLOWOUT

PREVENTER

Mdl. FHZ54-14, bore 21.1/4", working pressure 2000psi (14MPa),with flange bottom,temp class T-20-

29°~121°C,Rated control pressure 3000psi,commended operating pressure ≤1500psi,Assy Dim 1380x1437mm

(54.3/8"x56.1/2"), p/n. FH5414.00, License No. XK14-209-00007, Trim H2S,

API PDC 0321 02 20 1109, API 16A-0100


75 DOUBLE RAM BLOWOUT

PREVENTER

Mdl. 2FZ54-14, bore 21.1/4", working pressure 2000psi (14MPa),with flange connection top & bottom and

4x4.1/16" side outlets,temp class T-20-29°~121°C,Rated control pressure 3000psi,commended

operating pressure ≤1200-1500psi,Assy Dim 3206x1490x1345mm (126.1/4"x58.5/8"x53"), p/n.

RS11139-001, License No. XK14-209-00007, Trim H2S, API PDC 0221 02 20 07 09, API 16A-0100


75.1 double stud adapter flange

4.1/16" 2000 PSI X 4.1/16" 10.000PSI set 2 INTLEF Brand New IN PROGRESS

75.2 blind ram Use for 54-14 ram BOP set 1 INTLEF Brand New IN PROGRESS

76 ANNULAR BLOWOUT

PREVENTER

Mdl. FHZ35-35/70, bore 13.5/8", working pressure 5000psi (35MPa),with flange bottom,temp class T-20-

29°~121°C,Rated control pressure 2000psi,commended operating pressure ≤1500psi,Assy Dim 1271x1246mm (50"x49"), p/n. F35.00A, License No. XK14-209-00007,

Trim H2S, API PDC 03 13 05 20 03 09, API 16A- 0100


77 DOUBLE RAM BLOWOUT

PREVENTER

Mdl. 2FZ35-70, bore 13.5/8", working pressure 10,000psi (70MPa),with flange connection top &

bottom and 4x4.1/16" side outlets,temp class T-20-29°~121°C,Rated control pressure 3000psi,commended

operating pressure ≤1200-1500psi,Assy Dim 2670x1240x1776mm, p/n. RS11148-008, License No.

XK14-209- 00007, Trim H2S, API PDC 02 13 10 20 09 09, API

16A-0100


78 SINGL RAM BLOWOUT

PREVENTER

Mdl. FZ35-70, bore 13.5/8", working pressure 10,000psi (70MPa),with flange connection top & bottom ,temp

class T-20-29°~121°C,Rated control pressure 3000psi,commended operating pressure ≤1200-

1500psi,Assy Dim 2670x1240x1250mm 105.1/8"X48.7/8"X49.1/4"), p/n. RS11149-00A, License No. XK14- 209-00007, Trim

H2S, API PDC 01 13 10 20 09 09, API 16A-0100


79 SINGL RAM BLOWOUT

PREVENTER

Mdl. FZ35-70, bore 13.5/8", working pressure 10,000psi (70MPa),with flange connection top & bottom ,temp

class T-20-29°~121°C,Rated control pressure 3000psi,commended operating 255 73,00 SINGL

RAM BLOWOUT PREVENTER pressure ≤1200-1500psi,Assy Dim 2670x1240x1250mm

(105.1/8"X48.7/8"X49.1/4"), p/n. RS11149-00A, License No. XK14- 209-00007, Trim H2S, API PDC 01

13 10 20 02 09, API 16A-0100


79.1 shearing ram set 1 INTLEF Brand New IN PROGRESS

79.2 blind ram Use for 35-70 ram BOP set 1 INTLEF Brand New IN PROGRESS

79.3 rams FOR SIZE 9.5/8" CASING set 1 INTLEF Brand New IN PROGRESS

79.4 rams FOR SIZE 7" CASING set 1 INTLEF Brand New IN PROGRESS

79.5 rams FOR SIZE 4.1/2" set 1 INTLEF Brand New IN PROGRESS



79.8 variable bore ram

FOR SIZE 3.1/2" - 5" set 1 INTLEF Brand New IN PROGRESS

79.9 solid block pipe rams

FOR SIZE 5" set 2 INTLEF Brand New IN PROGRESS

80 DRILLING SPOOL

FOR SIZE 21.1/4" X 2000 PSI ( Mdl. FS54-14 ) set 1 INTLEF Refurbishment Complete

81 DRILLING SPOOL

FOR SIZE 13.5/8" X 10,000 PSI ( Mdl. FS35-70 ) set 1 INTLEF Refurbishment Complete

82 ADAPTOR FLANGE

11" 10,000PSI X 7.1/16" 10,000 PSI set 1 INTLEF Brand New IN PROGRESS

83 ADAPTOR FLANGE

11" 10,000PSI X 7.1/16" 5,000 PSI set 1 INTLEF Brand New IN PROGRESS

84 CHOKE & KILL MANIFOLD

Type : JG-S2Y-70-030, Main full bore : 4.1/16", HWP : 70MPa, Orifice : 2.9/16", LWP : 70MPa, PSL : 3, PR : 1,

MC : EE, TC : U, API 16C-0043, ISO10423

set 1 SHENKAI Refurbishment IN PROGRESS

85 REMOTE CONTROL SYSTEM

Mdl. FK.Q1280-9,type YC 01280,number of object controlled :

9, useful liquid volume of accumulator : 169.88US Gal (640L), nominal operating pressure : 3000psi

(21MPa),accumulator nitrogent precharge pressure : 1000psi (7MPa),electric pump delivery : 42x2L/min

(11.1x2US gal/min),motor power : 18,5 x 2 kw, Voltage : 380 VAC, displacement per pneumatic

pump : 5,2 US gal/min (19,6L/min), air supply pressure : 114psi (0,8MPa), air consumtion per pump : 84,8

SCFM (2,4m3/min), executive production standard number : SY/T5053.2-2001, product permit No. XK14-

001-00019, API Spec 16D, lincense no. 16D-0022


85.1 high pressure fire proof hose

Ø 25x35MPax36Mtr set 10 Brand New IN PROGRESS

86 casing conductor flange 30" od

(stud & flange )

2 Casing conductor flange to enable nipple up of diverter spool-Note one casing head is for spare (back

up) 30" OD pipe 28" ID pipe, Height is 300mm

set 2 Refurbishment IN PROGRESS

87 bell nipple Two bell nipples one to fit top of the diverter BOP and one to fit the top of the 13.5/8" BOP

set 2 NEW BUILD IN PROGRESS

88 DRILL WATCH DISPLAY

( Install on Driller Console )

Spectrum display, drill instrumentation instrinsically safe for use in class I, division 1, group

C&D hazardous location when installed in accordance with drawing cert-0005,temp1, code T4

FTB1, power : Vmax (Ui) : 12,6 VDC, Imax (II) : 1,2 A, C1:0 uf, Li: 0 mh or Vmax (Ui) : 22 VDC, Imax (II) : 147 MA, Ci: 0 uf, Li : 0 mh, communications & backlighting : Vmax (Ui) : 28 VDC, Imax (II) : 186 MA, Ci: 0 uf, Li : 0

mh

set 1 NOV M/D Totco


88.1 weight indicator gauge ( install on driller

console )

12" Indicator gauge, hook load & WOB, Twelve lines set 1 NOV M/D Totco

Refurbishment

88.2 load cell ( install on dead line anchor rig

floor )

set 1 NOV M/D Totco

Brand New AOG

88.3 pump pressure gauge

( install on driller

6" pump pressure gauge, working pressure: 10,000 PSI (689.655 BAR)

set 1 NOV M/D Totco

Refurbishment

console ) 88.4 load cell pump

pressure sensor ( install on stand pipe on rig floor )

working pressure 10.000 PSI, Union 1502,connection:1/4" NPT, working tem.: -29 to 121

deg C

set 1 NOV M/D Totco

Brand New IN PROGRESS

88.5 tong line pull gauge

( install on driller console )

6" tong torque, 110KLBS set 1 NOV M/D Totco

Refurbishment

88.6 tong line pull sensor

set 1 NOV M/D Totco


88.7 transducer box & sensor ( install

on driller console )

1000/5000/10000psi, Connection: 1/4" NPT, voltage : 8-

28 Volt, Amps : 120 mA (max), freq (HZ) : DC, oper temp : - 25/ 60 C, p/n. 40223931-3670

set 2 NOV M/D Totco

Refurbishment

88.8 drawworks encoder

HS35F-1-14L-R2-SS-500-AB-3904-TB-tV-EX-S, p/n. 924-01064-077

set 1 NOV M/D Totco

Refurbishment

88.9 DRILLING RECORDER

(install on Dog House )

Six parameter set 1 NOV M/D Totco

Refurbishment

88.10 total daq (install on dog house )

p/n. 220492-009, voltage : 90-250VAC, current : 3 amp max, freq : 47 - 65 HZ, enclosure : type 4X

set 1 NOV M/D Totco

Refurbishment

88.11 transducer e/p ( install on dog

house

XDCR assy E/P 0-4 mA, 3-15 psi, class I, Div1, groups C&D T6, when connected in accordance with dwg no.

218532 or 219569

set 1 NOV M/D Totco

Refurbishment

88.11 transducer e/p ( install on dog

house

XDCR assy E/P 0-4 mA, 3-15 psi, class I, Div1, groups C&D T6, when connected in accordance with dwg no.

218532 or 219569

set 1 NOV M/D Totco

Refurbishment

89 cpu for server (install on dog

house

CPU ,printer,UPS set 1 Refurbishment

89.1 pit area junktion box (install on

mud tank no. 3)

set 1 NOV M/D Totco


89.2 mud pump spm sensor (install on mud pump no. 1

)

Cl1, group C&D T4, hazardous location when connected per drawwing 219669

set 1 NOV M/D Totco



)

Cl1, group C&D T4, hazardous location when connected per drawwing 219669

set 1 NOV M/D Totco



)

group C&D T4, hazardous location when connected per drawwing 219669

set 1 NOV M/D Totco


89.5 pvt level sensor (install on mud

tank no. 2)

Ui.30V,Li.140mA,Pi 1W,Ci.0,Li 0mh,12-30VDC,Type 4.4X with maximum surface temp 120 deg C.

set 1 NOV M/D Totco



tank no. 3)


set 1 NOV M/D Totco



tank no. 4)


set 1 NOV M/D Totco



tank no. 6)


set 1 NOV M/D Totco



tank no. 7)


set 1 NOV M/D Totco


89.10 pvt level sensor (install on trip

tank )


set 1 NOV M/D Totco


90 center latch drill pipe elevator

Type DDZ5"/500, for 5" Drill Pipe, with API Spec 8A set 1 RUTONG Refurbishment Complete

91 center latch drill Type DDZ5"/500, for 5" Drill Pipe, with API Spec 8A set 1 RUTONG Refurbishment Complete

pipe elevator 92 center latch drill

pipe elevator Type DDZ3.1/2"/500, for 3.1/2" Drill Pipe, with API Spec

8A set 1 RUTONG Refurbishment Complete

93 center latch drill pipe elevator

Type DDZ2.7/8"/250, for 2.7/8" DRILL PIPE, with API Spec 8A

set 1 RUTONG Refurbishment Complete

94 center latch drill collar elevator

Type DD6.1/2"/150, for 6.1/2" Drill Collar, with API Spec 8A/8C

set 1 RUTONG Refurbishment Complete

95 center latch drill collar elevator

FOR 4.3/4" DRILL COLLAR set 1 RUTONG Refurbishment

96 casing rotary slips

Type CMS-XL 18.5/8", for 18.5/8" Casing, with API Spec 7K

set 1 RUTONG

97 drill tool lifting bolt

7.5/8" REG PIN, OD : 200, ID : 90, OAL : 260 set 2 SHHUANGJIA


6.5/8" REG PIN, with OD : 203, ID : 90, OAL : 337 set 2 SHUANGJIA


NC-50 PIN, with OD : 165, ID : 80, OAL : 289 set 2 SHUANGJIA

100 Pneumatic slip FOR SIZE 2.3/8" - 5.1/2" set 1 RUTONG Refurbishment IN PROGRESS

101 Auxiliary equipment


101.1 fuel tank Type CYG20,standard Q/HFD 005-2005, capacity 20m3, c/w fuel pump room

set 1 FEIDA Refurbishment

101.2 fuel tank Type CYG20,standard Q/HFD 005-2005, capacity 20m3, c/w fuel pump room


101.3 fuel tank Type CYG50B, Q/HFD005-2005 with Capacity 50M3 c/w measuring fuel UFZ-04, scope 2800, 2 Ea Valve 2"

& 1 set pipe line 2" for inlet & outlet


101.4 fuel tank Type CYG50B, Q/HFD005-2005 with Capacity 50M3 c/w fuel pump room














101.9 water tank Mdl. SG20, type Q/HFD005-2005,capacity 20m3 set 1 FEIDA Refurbishment 101.10 water tank Mdl. SG20, type Q/HFD005-2005,capacity 20m3 set 1 FEIDA Refurbishment 101.1 water tank CAPACITY 100M3 set 1 FEIDA Refurbishment 101.1 water tank CAPACITY 100M3 set 1 FEIDA Refurbishment 102 5“ DP 5" OD, SYZC SPEC 5D-0082 (127x9,19 TK34 091106

SY/T0544-2009), 19.50lb/ft,Grade S-135,NC-50 connection API Standard,R2.

pcs 486 SHANDONG Refurbishment Complete

103 3.1/2" DP 3.1/2" OD, SYZC SPEC 5D-0082 (88,9x9,35 TK34 091109

SY/T0544-2004), 15.50lb/ft,Grade S-135,NC-38 connection API Standard,R2.


104 5" Pup joint DP 5" with NC-50 Connection, 15ft Length pcs 2 SHANDONG Refurbishment Complete 105 3.1/2" Pup joint DP 3.1/2" with NC-38 Connection, 15ft Length pcs 2 SHANDONG Refurbishment Complete 106 5" Pup joint DP 5" with NC-50 Connection, 10ft Length pcs 2 SHANDONG Refurbishment Complete 107 3.1/2" Pup joint DP 3.1/2" with NC-38 Connection, 10ft Length pcs 2 SHANDONG Refurbishment Complete 108 5" Pup joint DP 5" with NC-50 Connection, 5ft Length pcs 1 SHANDONG Refurbishment Complete 109 3.1/2" Pup joint DP 3.1/2" with NC-38 Connection, 5ft Length pcs 1 SHANDONG Refurbishment Complete 110 5“ HWDP Size 5" with 6.1/2" OD tool joint x 4.1/2" if (NC-50)

connection, grade G, 50 lb/ft min, Range 2, API 7-1-0483


111 3.1/2" HWDP Size 3.1/2" with 6.1/2" OD tool joint x 3.1/2" if (NC-38) connection, grade G, 25 lb/ft min, Range 2, API 7-1-

0483


112 Spiral DC 9.1/2" DC Spirall type with 7.5/8" Reg Pin X Box pcs 6 SHANDONG Refurbishment Complete

Connection 113 Spiral DC 8" DC Spirall type with 6.5/8" Reg Pin X Box

Connection pcs 12 SHANDONG Refurbishment Complete

114 Spiral DC 6.1/2" DC Spirall type with 4.1/2" IF Pin X Box Connection ( NC-50 )


115 Spiral DC 4.3/4" DC Spirall type with 3.1/2" IF Pin X Box Connection ( NC-38 )


Item - Salvex

Documents

Transcript of Item - Salvex