1-800-282-8378 - Bob Dean Supply, Inc.

1-800-282-8378

�

Bob Dean Supply, Inc.

To Our Customers

We are pleased to present this copy of our catalog to you as a convenient reference and buying guide to the supplies and equipment most used by our customers. Our goal is to bring you products that will satisfy your needs, so it is with pride that we call your attention to the nationally known manufacturers whose products are shown here.

Whenever you need additional information on the material shown, or for any of your other requirements, please call our experienced staff. They can provide detailed information on prices and availability. If you do not see the product you need in this catalog, we can most likely order it. Bob Dean Supply prides itself on aquiring hard-to-find, specialty, and custom items for its customers.

The growth that we have enjoyed through the years has been made possible by the efforts of our personnel and the patronage of our customers.

We are grateful for your support and will endeavor to serve you in the future in a manner that will deserve your continued patronage.

Sincerely,

Robert S. Dean, Jr.President

Main Branch Clewiston Branch2624 Hanson Street 1310 Evercane RoadFort Myers, FL 33901 Clewiston, FL 33440(800) 282-8378 (800) 282-5186(239) 332-1131 (863) 983-6131(239) 332-7746 Fax (863) 983-9775 Fax

HoursMain Office ............................. 7:30AM - 5:00PM Mon-FriMachine Shop ......................... 7:30AM - 4:00PM Mon-FriPump & Motor Rewind Shop .... 7:30AM - 4:00PM Mon-FriSteel Department .................... 7:30AM - 5:00PM Mon-Fri

Bob Dean Supply is Closed on Saturday and Sunday

Abrasives ....................... 3 - 8

Chemicals & Paint .......... 9 - 24

Fasteners ....................... 25 - 32

Hand Tools ..................... 33 - 58

Power Tools .................... 59 - 84

Material Handling .......... 85 - 95

Hose & Hose Fittings ...... 96 - 123

Pipe Fittings & Valves ..... 124-138

Electric Motors .............. 139-157

Power Transmission ........ 158 -301

Pumps ........................... 302-330

�

www.bobdeansupply.com

• Waterjet Cutting - Tolerances tighter than +/-0.005” are achievable - Materials ranging from 10” stainless steel to 0.010” acrylics can be cut by waterjet - Computer controlled heads: Burny Phantom ST CNC controller - Cutting envelope: 73” x 145” X - Y travel capacity - Up to 4” plate thickness for steel and stainless steel - 6’ x 12’ table•LTEC Gas and Plasma Cutting Machine - Computer Controlled Heads• Sawing - 3 saws - Mitre cutting - 8” x 14” Horizontal Bandsaw - 18” x 18” capacity Marvel Bandsaw•Forming - 350 ton x 12’ Cinncinnati CNC Press Brake

•Iron Working -Ficep Iron Worker 29 ton 6” x 6” x 1/2” Angle Capacity

•Milling and Turning - VTC 30 Mazak with 24” x 75” table x 24” height - Fadal 4020 with 40” x 20” table - Haas SL30 Big Bore with 4” spindle hole and bar feed - Mazak Quick Turn 28” x 36” CNC Lathe - Milwaukee 4B Vertical Mill with 18” x 72” table - Lucas 2-1/2” Boring Mill - 3 additional Enco Vertical Mills - 3 Summit 19-4 Lathes x 120” Centers - 150 ton Vertical Hydraulic Press - Summit Radial Drill 8” column x 36” reach - Heller 1” x 10’ Four-Roll Hydraulic Plate Roller•Shearing -HTC “Heavy Half” Hydraulic Shear - up to 3/4” x 120” mild steel, 3/8” x 12” stainless steel - Summit Hydraulic Shear - to 1/4” x 120” mild & stainless steel - Cinncinnati 3/8” x 12’ CNC Shear

MachineShop

SteelDepartment

Bob Dean Supply’s Machine Shop was founded in 1947 and is the oldest operating shop in Southwest Florida. The shop has three TIG welding stations and six MIG welding stations located in its 20,000 square foot facility. A 7.5 ton overhead bridge crane and a 6 ton overhead bridge crane allows the shop to accommodate even the largest of projects. A mobile welding truck with Heli-Arc trailer is also available for location welding jobs and emergency repairs.

Bob Dean Supply’s Steel Department is comprised of a 14,000 square foot warehouse and a two acre outdoor storage area. The department stocks domestic steel from Nu-Cor, EXL Tube, Allied Crawford and Cargill Steel.

• Structural Steel Angle - Bar size Angle - Structural size Junior Beams Standard I Beams Wide Flange Beams Channel - Bar size Channel - Structural size

• Plate and Sheet Universal Mill Plate Hot Rolled Plate H/R Pickled & Oiled • • • Plate Floor Plate Galvanized Steel Sheet Hot Rolled Sheet Cold Rolled Sheet

• Bars Hot Rolled Square Hot Rolled Rounds Reinforcing Bar (rebar) Hot Rolled Strip Bar Hot Rolled Flat Bar Cold Finished Round Bar

• Tubing and Pipe Square Tubing Rectangular Tubing Galvanized Steel Pipe Black Steel Pipe Sch. 80 Steel Pipe

• Expanded Metal and Grating Expanded Metal Expanded Metal Grating Carbon Steel Grating

• Stainless Steel Plate Sheet Floor Plate Pipe Angles Squares Flat Bar Rounds

• Aluminum Sheet Plate Angles Channel Square Tube Flat Bar Round Tube Rectangular Tube Mechanical Tube Pipe Treadbrite Expanded Metal Grating

1-800-282-8378

�

W x L Grit Part No.1”x 30” 320G E19242” x 48” 120G E19062” x 48” 100G E19073” x 24” 100G E19153” x 21” 80G E19363” x 21” 60G E1916

4” x 132” 80G E19406” x 48” 120G E19096” x 48” 100G E19086” x 48” 80G E19006” x 48” 60G E19106” x 48” 40G E1912

Type Part No.Fine Emery Cloth E1882Medium Emery Cloth E1881Coarse Emery Cloth E1880

Metalite R228 Belts. For a wide range of metalworking applications. Ideal where cutting action is more important than backing conformability. Strong X-wt cotton backing. Aggressive cutting and resistant to heat.

Emery sheets are ideal for extra fine finishes. Highest quality, natural emery abrasive. Sheets tear cleanly and straight without shredding. 9” x 11” sheet.

Type Part No.1000 Grit E1871600 Grit E1870400 Grit E1872320 Grit E1873220 Grit E1875180 Grit E1878120 Grit E187780G Grit E1876

Waterproof. For wet or dry. Use on metal, body filler, paint, glass and wood. 9” x 11” Sheets.

Coated abrasive rolls are designed for fast and easy sanding of various surfaces and can be torn to exact lengths as needed. Handy rolls are packaged in a protective, convenient dispenser which eliminates costly waste and permits neat, easy storage. Aluminum Oxide. 50 Yard Rolls.

Size Grade Part No.1” 80G E18101” 120G E18131” 180G E18141” 220G E1815

Belts, Rolls& Sheets

Aluminum Oxide Abrasive Belts

Wet/Dry Sand Paper

Shop Rolls

Emery Cloth (Sheets)

Size Grade Part No.1-1/2” 50G E18661-1/2” 60G E18651-1/2” 80G E18641-1/2” 100G E18631-1/2” 120G E18621-1/2” 180G E18611-1/2” 220G E18601-1/2” 320G E1859

Size Grade Part No.2” 50G E18582” 60G E18572” 80G E18562” 100G E18552” 120G E18542” 180G E18532” 220G E18522” 320G E1850

ABRASIVESBelts, Rolls & Sheets ...................3Buffs & Buffing Compounds ........4Burs ........................................... 4Discs & Wheels ..........................4Hand Pads .................................. 6Wire Cup Brushes ......................7Wire Brushes .............................7Metal Files .................................8File Handles ............................... 8

Manufacturers & Vendors

BrilliantCarbourundum AbrasivesDeWaltFormaxNorton AbrasivesOsborn Warrensville File

�


Use 3/16” or thicker for grinding, thinner for cutting or notching mild steels, stainless and alloys. Arbor required.

Cut-Off Wheels for GrindersCut-Off Wheels for Hand Held Gas Saws

Size For Use On Part No.11-7/8” x 1/8” x 1” Metal E1150

11-7/8” x 5/32” x 20mm Metal E115111-7/8” x 1/8” x 1” Concrete E1153

11-7/8” x 1/8” x 20mm Concrete E115411-7/8” x 1/8” x 1” Ductile Iron E1156

11-7/8” x 1/8” x 20mm Ductile Iron E115714” x 1/8” x 1” Metal E1160

14” x 1/8” x 20mm Metal E116114” x 1/8” x 1” Masonary E1162

14” x 1/8” x 20mm Masonary E116314” x 1/8” x 1” Ductile Iron E1166

14” x 1/8” x 20mm Ductile Iron E1167

Size Arbor Part No.3” x 1/32” 1/4” E11103” x 1/32” 3/8” E11113” x 1/16” 1/4” E11143” x 1/16” 3/8” E11153” x 1/8” 1/4” E11183” x 1/8” 3/8” E11193” x 1/4” 3/8” E1112

Cut-off wheels for hand held gasoline powered saws.

Size Arbor Part No.4” x 1/32” 3/8” E11224” x 1/16” 3/8” E11244” x 1/8” 3/8” E1126

4-1/2” x 1/32”Raised hub 7/8” E1130

Burs

Double Cut Carbide burs feature an overall shank length of 2”. Burs feature precision ground tungsten carbide tips brazed to a hardened steel shaft. Double cut is the most popular fluting style and provides efficient stock removal in small granular chips without loading. Ideal for steel, stainless, alloys, exotics and plastics.

Part No. Shape Dimensions Model E3971 Cylindrical 1/4” x 5/8” x 1/4” Shank SA-1DE3972 Cylindrical 3/8” x 3/4” x 1/4” Shank SA-3DE3973 Cylindrical 1/2” x 1” x 1/4” Shank SA-5DE3974 Cylindrical Ball Nose 1/4” x 5/8” x 1/4” Shank SC-1DE3975 Cylindrical Ball Nose 3/8” x 3/4” x 1/4” Shank SC-3DE3976 Cylindrical Ball Nose 1/2” x 1” x 1/4” Shank SC-5DE3977 Ball 3/8” x 5/16” x 1/4” Shank SD-3DE3978 Ball 1/2” x 7/16” x 1/4” Shank SD-5DE3979 Oval / Egg 3/8” x 5/8” x 1/4” Shank SE-3DE3980 Round Nose Tree 1/4” x 5/8” x 1/4” Shank SF-1DE3981 Round Nose Tree 3/8” x 3/4” x 1/4” Shank SF-3DE3982 Round Nose Tree 1/2” x 1” x 1/4” Shank SF-5DE3983 Pointed Tree 1/4” x 3/4” x 1/4” Shank SG-1DE3984 Pointed Tree 3/8” x 3/4” x 1/4” Shank SG-3DE3985 14°Ball Nose Cone 3/8” x 1-1/16” x 1/4” Shank SL-3DE3986 14°Ball Nose Cone 1/2” x 1-1/8” x 1/4” Shank SL-4D

Cylindrical

Cylindrical Ball Nose

Ball

Oval / Egg

Round Nose Tree

Pointed Tree

14° Ball Nose Cone

16 Piece Bur Set - Part No. E3970Double Cut Carbide Bur Set. 16 of the most popular double cut burs in an attractive wooden box. SA-1D, SA-3D, SA-5D, SC-1D, SC-3D, SC-5D, SE-3D, SF-1D, SF-3D, SD-5D, SG-1D, SG-3D, SL-3D, SL-4D.

Double Cut Carbide Burs

10” Buff - Part No. N0005Formax 10” x 1/4” x 1/2” Spiral Sewn Full Disc Buff. Cotton. 515-7313.

8” Buff - Part No. N0016 Formax 8” x 1/4” x 1/2” Spiral Sewn Full Disc Buff. Cotton. 515-7312.

Spiral Sewn Cotton Buffs

White Jewelers Rouge - Part No. N0009White Formax Jewelers Rouge Bar Compound. J-51. An extremely dry grade of compound made with ultra-fine, soft abrasive powders. Produces a clear, brilliant, mirrorlike finish on chromium, stainless, carbon steel, brass and aluminum. 1-1/2” x 1-1/2” x 7” Bar.

Green Jewelers Rouge - Part No. N0011Green Formax Jewelers Rouge Bar Compound. J-52. Dry compound made with green chromium oxide powder. Used for extremely fine color buffing jobs on all classes of metals, for buffing precision tools, dies, and plug gages to a mirror bright finish and to remove light “metal fuzz” or lap lines. 1-1/2” x 1-1/2” x 7” Bar.

Green Stainless Steel Rouge - Part No. N0012Formax Green Stainless Steel Rouge. Grade #306. Dry working grade that combines fine alumina blended with green chromium oxide for producing a bright, lustrous buffed surface. 2” x 2” x 10” Bar.

Buffing Compounds / Rouge

Buffs &Compounds

Discs &Wheels

1-800-282-8378

�

Suitable for light and medium weld blending on aluminum, stainless steel, ferrous and non-ferrous materials.

Reinforced Zirconia Aluminum abrasive. Resin bond. Fast cut rate on steel/metal. Ideal for cutting stainless and high alloy steels. For use on fixed-base machines.

Premium abrasive. High performance resin bond. Best choice for cutting light tubing, angle iron, steel extrusions, stainless, alloyed steel and many non-ferrous metals. For use on table-top machines.

Aluminum Oxide

Size Grade Part No.4-1/2” x 7/8” 80G E15434-1/2” x 7/8” 60G E15484-1/2” x 7/8” 36G E15444-1/2” x 7/8” 24G E15454-1/2” x 7/8” 120G E1547

5” x 7/8” 120G E16015” x 7/8” 24G E16025” x 7/8” 60G E16035” x 7/8” 36G E16045” x 7/8” 80G E16055” x 7/8” 100G E16065” x 7/8” 50G E16077” x 7/8” 16G E1612

These fiber discs feature a full resin bond system with heavy-duty fiber backing for increased strength, durability and tear resistance. For material removal, weld grinding and blending, light deburring and finishing. Versatile performance for all MRO and general purpose applications.

Silicon Carbide

Type Size Part No.Medium 6” x 1” x 1” E1234Medium 8” x 1” x 1” E1244

Fine 6” x 1” x 1” E1235Fine 8” x 1” x 1” E1245

Discs & Wheels

Cotton Fiber Discs

Cut-Off Wheels for Stationary Machines

Bench and Pedestal WheelsResin Fiber Sanding Discs

Size Part No.12” x 3/32” x 1” E114014” x 3/32” x 1” E1144

14” DW8001 H131816” x 3/32” x 1” E114516” x 5/32” x 1” E114618” x 3/16” x 1” E1148

Size Arbor Grit Part No.4-1/2” x 1/4” 7/8” 36G E8056

7” x 1/4” 7/8” 36G E8058

Zirconia Aluminum

Size Grade Part No.7” x 7/8” 36G E16105” x 7/8” 36G E16085” x 7/8” 60G E1597

9-1/2” x 7/8” 36G E1630

Aluminum Oxide

Type Size Part No.Coarse 6” x 3/4” x 1” E1225Coarse 8” x 1” x 1” E1240Coarse 10” x 1” x 1-1/4” E1250Coarse 12” x 2” x 1-1/2” E1258

Medium 6” x 3/4” x 1” E1226Medium 8” x 1” x 1” E1241Medium 10” x 1 x 1-1/4” E1251Medium 10” x 1-1/2” x 1-1/4” E1254Medium 12” x 2” x 1-1/2” E1259

Fine 6” x 3/4” x 1” E1227Fine 8” x 1” x 1” E1242Fine 10” x 1 x 1-1/4” E1252

Cut-Off Wheels for Chop Saws

Size Arbor Part No.12” x 1/8” 1” E807014” x 1/8” 1” E8072

14” x 7/64” Fast Cut 1” E807516” x 5/32” 1” E8074

Size Grade Part No.7” x 7/8” 24G E16147” x 7/8” 36G E16167” x 7/8” 50G E16187” x 7/8” 60G E16207” x 7/8” 80G E16227” x 7/8” 100G E16247” x 7/8” 120G E16279” x 7/8” 16G E16329” x 7/8” 24G E16349” x 7/8” 36G E16369” x 7/8” 50G E16389” x 7/8” 60G E16409” x 7/8” 80G E1642

Zirconia aluminum abrasive. For light stock removal, blending and finishing all in one application. Flap discs grind like a depressed center wheel and finish like a fiber disc to reduce process time and lower total grinding costs.Type 27 Flat.

Diam. Arbor Grade Part No.1” x 1” 1/4” 60G E17851” x 1” 1/4” 80G E1787

2” x 1/2” 1/4” 120G E17882” x 1” 1/4” 80G E1783

2-1/2” x 1” 1/4” 80G E17813” x 1” 1/4” 60G E17904” x 1” 5/8” 80G E17916” x 1” 1” 60G E17866” x 1” 1” 80G E17826” x 1” 1” 120G E1784

Aluminum Oxide abrasive. Designed to deliver a consistent finish with a uniform rate of cut, flap wheels wear away, continually exposing fresh abrasive. Conformable to most shapes, they are available in coarse to fine grit.

Diam. Arbor Grade Part No.4” 5/8” 40G E80314” 5/8” 60G E80324” 5/8” 80G E8033

4-1/2” 5/8”-11 Nut 40G E80374-1/2” 5/8”-11 Nut 60G E80384-1/2” 5/8”-11 Nut 80G E80394-1/2” 7/8” 120G E8040

7” 5/8”-11 Nut 40G E80477” 5/8”-11 Nut 60G E80487” 5/8”-11 Nut 80G E8049

Flap DiscsFlap Wheels

�


Diam. Arbor Size Material Trim PartNo.4” Knot - 10mm Steel H1643

6” 5/8”-11 1/2”x.025 Steel 1-1/2” X12864” 1/2”-13 5/16”x.0095 Steel 7/8” X14388” 5/8”-11 5/8”x.025 Steel 1-11/16” X14108” 2” 5/8”x.020 Steel 1-11/16” X1262

Rugged knot-type construction provides high brush flexibility, more uniform results, maximum safety and efficient operation at high speeds. Brushes larger than 6” should be mounted on stationary tables; those 6” and smaller can be mounted to stationary installations or attached to portable tools. Features standard twist knot.

Knot Wire Wheel Brush

Hand Pads

Discs &Wheels

Depressed Center Wheels for Right Angle Grinders

Non-woven nylon, low density pads impregnated with abrasive grain. Excellent conformability and flexibility. Easy to fold. An alternative to steel wool and wire brushes. All pads are 6” x 9”.

Type Color Description Part No.Non-Abrasive White For general clean-up, light primer rub down and paint overspray removal. -Micro Fine S/C Gray Micro fine grit, silicon carbide pad for light cleaning steel & final rubbing. E1720Ultra Fine S/C Gray Ultra fine grit, silicone carbide pad for denubbing between finish coats. E1773 VF A/O Food Pro Lt Green Very fine grit, aluminum oxide pad for general purpose use in food processing plants. -General Purpose Maroon Very fine grit, aluminum oxide pad for general purpose applications. E1775Scouring Pad Green Very fine grit, aluminum oxide pad for general clean-up as well as finishing stainless. -Medium S/C Gray Medium grit, silicone carbide pad for use in blending applications, esp. stainless. -Coarse Tan Heavy-duty medium grit aluminum oxide pad for agressive action. E1777

Hand Pads

General Purpose

Size Type Part No.4” x 1/4” x 5/8” XL E11734” x 1/4” x 5/8” General Purpose E11754” x 1/8” x 5/8” General Purpose E1174

4-1/2” x 1/4 x 5/8”-11 General Purpose E11764-1/2” x 1/4” x 5/8”-11 XL E11784-1/2” x 1/4” x 5/8”-11 Aluminum E1180

4-1/2” x 1/4” x 7/8” General Purpose E11774-1/2” x 1/4” x 7/8” XL E1179

7” x 1/4” x 7/8” General Purpose E11847” x 1/4” x 5/8”-11 General Purpose E11857” x 1/4” x 5/8”-11 Masonry E11917” x 1/4” x 5/8”-11 Aluminum E1196

9” x 1/4” x 7/8” General Purpose E11879” x 1/4” x 5/8”-11 General Purpose E11889” x 1/4” x 5/8”-11 Masonry E11939” x 1/4” x 5/8”-11 Aluminum E1198

9” x 1/4” x 7/8” Notcher E1542

Premier Red Zirconia Alumina Abrasive

Size Type Part No.4” x 1/4” x 5/8” Premier Type 27 E8013

4-1/2” x 1/4” x 1/4” Premier Type 27 E80144-1/2” x 1/4” x 5/8”-11 Premier Type 27 E8015

7” x 1/4” x 7/8” Premier Type 27 E80207” x 1/4” x 5/8”-11 Premier Type 27 E80219” x 1/4” x 5/8”-11 Premier Type 27 E8024

For Stainless Steel and Metal. Features a high-performance zirconia alumina abrasive, a high-performance resin bond and exceptional balance. Unique glass cloth reinforcement design. 60% faster stock removal and a minimum of 3 times the life over aluminum oxide wheels. Manufactured by Carborundum Abrasives.

Type 27 Depressed Center Wheels for Right Angle Grinders.

Wire CupBrushes

1-800-282-8378

�

WireBrushes

Wire CupBrushes

Diam. Arbor Size Material Type Trim Part No.6” 5/8”-11 .020 Steel Grinder 1-3/4” X12876” 5/8”-11 .035 Steel Dbl Row HD 1-3/4” X1288

2-3/4” 5/8”-11 .014 SS Stainless Grinder 7/8” X13912-3/4” 5/8”-11 .020 SS Stainless Grinder 7/8” X13922-3/4” M10x1.25 .014 Steel Grinder 7/8” X13932-3/4” 5/8”-11 .014 Steel Dbl Row HD X13973-1/2” 5/8”-11 .020 Steel Dbl Row HD 1-3/8” X1394

4” M14x2.0 .014 Steel Grinder 7/8” X14374” 5/8”-11 .014 Steel Grinder 7/8” X14396” 5/8”-11 .035 Steel Dbl Row HD 1-3/4” X1496

For use on high speed air and portable tools. Applications include removal of weld scale, rust, old paint and corrosion, cleaning and surface prep of metals.

Diam. Arbor Size Material Face Part No.2” 3/8” .014 x 1/4” Steel Small Dia. X12553” 1/2” .040 x 1/4” Steel Small Dia. X12536” 5/8” .014 x 5/8” Steel Narrow X12046” 2” .0104 x 7/8” Steel Medium X12566” 2” .014 x 7/8” Steel Medium X12578” 2” .014 x 5/8” Steel Medium X12658” 2” .020 x 5/8” Steel Medium X12668” .014 x 1/2” Steel Narrow X12678” 2” .020 x 1-1/2” Steel Wide X1268

10” 2” .014 x 5/8” Steel Narrow X126910” 2” .0104 x 1-1/4” Steel Medium X127010” 2” .020 x 1-1/4” Steel Medium X142012” 2” .0104 x 1-1/4” Steel Medium X1278

These brushing tools are filled densely and uniformly with special analysis steel wire. Adaptable to a wide range of equipment, they combine excellent brushing characteristics with exceptionally long life. Also adaptable to multiple mounting for brushing wide areas. Narrow face are more flexible than the wide and medium duty styles.

Fits Arbor Hole Model No. Part No.2” 1/4” 75019 X13602” 3/8” 75020 X13622” 1/2” 75021 X13642” 5/8” 75022 X13662” 3/4” 75023 X13682” 7/8” 75024 X13702” 1” 75025 X13722” 1-1/8” 75026 X13742” 1-1/4” 75027 X13762” 1-1/2” 75028 X1378

1-1/4” 1/2” 75048 X13801-1/4” 5/8” 75049 X13811-1/4” 3/4” 75050 X1382

Metal adapters for brushes with 2” and 1-1/4” arbor holes. Slip fit. Note: these are used in pairs. Osborn Interational.

Crimped Wire Wheel Brush

Knot Wire Cup Brush

Wire Wheel Adapters

Kiln-dried hardwood for maximum tuft retention. Smooth machined finish provides excellent comfort in use. Hang-up hole for convenient storage.

Fill Material Handle Size Brush Area Model No. Part No..012 Stainless Steel Curved Long 13-3/4” 6” x 15/16” 83007 X1460

.014 Steel Curved Long 13-3/4” 6” x 15/16” 83001 X1480

.014 Steel Shoe 10” 5-1/4” x 1-1/16” 83003 X1483.0104 Stainless Steel Curved 7-3/4” 7/16” x 1-7/16” 54022 X1498

Long Handle Scratch Brush

Crimped Wire Cup Brush

For use on high speed small grinders. For use on flat surfaces and edges.

Diam. Arbor Trim Length Max RPM Material Part No.2-3/4” M10 x 1.25 1” 14000 Steel X13862-3/4 5/8-11 NC 1” 14000 Steel X13882-3/4 1/2-13 NC 1” 14000 Steel X1398

6 5/8-11 NC 1-1/2” 7000 Steel X14004 5/8-11 NC 1-1/8” 9000 Steel X14015 5/8-11 NC 1-1/2” 8000 Steel X1403

�

www.bobdeansupply.comMetalFiles

Size Type Part No.6” Bastard E03008” Bastard E0302

10” Bastard E030412” Bastard E030614” Bastard E030816” Bastard E0317

6” Best Bastard E04008” Best Bastard E0401

10” Best Bastard E0402

This file is recommended for fast stock removal where a smooth finish is not required. In addition to being double cut, it differs from the Mill File in that it is thicker in the cross section. Size Type Part No.

6” Bastard E0340

8” Bastard E0342

10” Bastard E0344

12” Bastard E0346

14” Bastard E0348




10” Bastard E032412” Bastard E032614” Bastard E0328

6” Best Bastard E04108” Best Bastard E0411


Size Type Part No.12” Bastard E0366



10” Bastard E038412” Bastard E038614” Bastard E03886” Smooth E0378

Size Type Part No.6” Slim E03898” Slim E0390

10” Slim E0391

Size Type Part No.10” Bastard E03988” Smooth E0395

10” Smooth E0396

Size Part No.4” E05546” E0555

8” - 10” E0556

These are designed for filing concave surfaces having a smaller radius than a Half Round File. Also for enlarging round holes and making a corner radius.

Rounded with approximately a third of a round on one side and double cut flat on the other. Used for filing concave surfaces, enlarging large holes, and making a corner radius.

Perfectly square tapering towards the point used for enlarging slots and keyways, grooves, holes having right angles, and for filing flat surfaces.

Shaped like a knife blade, this wedge shaped file is double cut, tapers to one sharp edge and also tapers in width toward the point. The back is safe, or uncut. Due to its wedge shape, this file is very useful in filing acute angles.

Universally used by all machinists, this file is recommended for fast stock removal where a smooth finish is not required. In addition to being double cut, it differs from the Mill File in that it is thicker in the cross section.

Single cut, two square edges with teeth and tapered. Often in conjunction with a Flat or Hand file as a finishing file after the “hogging off” operation. The name came from their most common use in years gone by, sharpening saws in lumber mills.

Kiln dried handle made of hickory or ash, stained and coated. A “long ferrule” style of heavy construction that “locks in” the tang for the file to remain rigid. The file handle is reusable, driven on and off with a hammer.

Flat Files

Half Round Files

Knife Files

Taper / Triangular Files

Round Files

Square Files

Mill Files

Wooden Drive-On File Handles

Size Type Part No.12” Best Bastard E040314” Best Bastard E0404

6” Smooth E031410” Smooth E031512” Smooth E0316

8” Best Smooth E049510” Best Smooth E049614” Best Smooth E0497


8” Smooth E033210” Smooth E033112” Smooth E033414” Smooth E0332

8” Best Smooth E054010” Best Smooth E0541

Size Type Part No.




6” Smooth E0372

8” Smooth E0371

10” Smooth E0374

12” Smooth E0373


10” Best Bastard E043212” Best Bastard E043314” Best Bastard E0434

Size Type Part No.10” Best Bastard E0442

12” Smooth E0489

Size Type Part No.8” Best Slim E05006” Best Regular E0498

Size Part No.12” - 14” E0557

16” E0558



3 Square Triangular Files

Triangular in shape tapering toward the point and double cut. Although similar in cross section to the Taper File, the sharp corners of the 3 Square are designed for filing acute internal angles, not for sharpening saws like the Taper Files.

1-800-282-8378 - Bob Dean Supply, Inc.

Documents

Transcript of 1-800-282-8378 - Bob Dean Supply, Inc.