home software hardware support downloads purchase training account Overview Support Logout[Back To Main Menu]00:58:18last save: 2013-08-26 17:30:431. /store allows you to save to external diskA. dude dataB. system configurationC. web-proxy dataD. User-Manager data2. A station can connect to AP if they both use different country regulation settings, but the frequency chosen is allowed in both countries3. Which computers would be able to communicate directly (without any routers involved)A. 192.168.0.5/26 and 192.168.0.100B. 192.168.17.15/29 and 192.168.17.20/28C. 10.10.0.17/22 and 10.10.1.30/23D. 10.5.5.1/24 and 10.5.5.100/254. What is possible with Netinstall?A. MikroTik RouterOS password reset with saving router's configurationB. MikroTik RouterOS configuration resetC. MikroTik RouterOS reinstall5. Choose the best option to offer hotspot access to a known wireless client without HotSpot authenticationA. /ip firewall mangleB. /ip hotspot walled gardenC. place Client registered MAC address in access listD. /ip hotspot ip-binding6. Collisions are possible in full-duplex Ethernet networks7. Is it possible to use the MikroTik Nstreme protocol with Windows wireless clients, if they install a special driver that can be downloaded from the MikroTik webpage?8. For static routing functionality, additionally to the RouterOS system package, you will also need the following software package:A. dhcpB. noneC. routingD. advanced-tools9. You wish to secure your RouterOS system. You do not want the RouterOS to be discoverable using MNDP or CDP locally. You also want to deny management via the MAC addresses on all interfaces. Select the correct actions to accomplish this.A. Remove/Disable all discovery interfacesB. Place a proper input firewall rule to block mac discoveryC. Remove/Disable the InterfacesD. Place a proper forward firewall rule to block mac discoveryE. Remove/Disable all interfaces under mac-Server winboxF. Add a Deny All input firewall ruleG. Remove/Disable all interfaces under mac-server telnet10. Configuring HotSpot is possible on MikroTik RouterOS only with a wireless interface.11. Which default route will be active?/ip routeadd disabled=no distance=10 dst-address=0.0.0.0/0 gateway=1.1.1.1add disabled=no distance=5 dst-address=0.0.0.0/0 gateway=2.2.2.2A. Route via gateway 1.1.1.1B. Route via gateway 2.2.2.212. Is it possible for a client to get an IP address but no gateway after a successful DHCP request?13. To be able to do NAT the connection tracking does not need to be enabled.14. Which is correct masquerade rule for 192.168.0.0/24 network on the router with outgoing interface=ether1?A. /ip firewall nat add action=masquerade chain=srcnat src-address=192.168.0.0/24B. /ip firewall nat add action=masquerade chain=srcnatC. /ip firewall nat add action=masquerade out-interface=ether1 chain=dstnatD. /ip firewall nat add action=masquerade chain=srcnat out-interface=ether115. You start a scan for wireless networks on you access point. What will happen ?A. You'll see available frequenciesB. All connected clients will disconnectC. You'll see all connected clients16. Possible actions of ip firewall filter are:A. add-to-listB. tarpC. acceptD. logE. bounceF. tarpit17. What is necessary for PPPoE client configuration?A. Static IP address on PPPoE client interfaceB. Interface (on which PPPoE client is going to work)C. ip firewall nat masquerade rule18. You have a router with configuration- Public IP :202.168.125.45/24- Default gateway:202.168.125.1- DNS server: 248.115.148.136, 248.115.148.137- Local IP: 192.168.2.1/24Mark the correct configuration on client PC to access to the InternetA. IP:192.168.2.2/24 gateway:202.168.125.45B. IP:192.168.0.1/24 gateway:192.168.2.1C. IP:192.168.2.115/24 gateway: 192.168.2.1D. IP:192.168.2.253/24 gateway:202.168.0.1E. IP:192.168.1.223/24 gateway:248.115.148.13619. How long is level 1 (free) license valid?A. 1 yearB. Infinite timeC. 1 monthD. 24 hours20. You can control bandwidth of a client connected to AP with the resource / interface wireless access-list ( assume the client uses MikroTik RouterOS).21. DHCP server is configured on a routers ether1 interface. IP address 192.168.0.100/24 is assigned to the interface. Possible IP pools, that can be used by this DHCP server, are:A. 192.169.0.1-192.169.0.254B. 192.168.0.1-192.168.0.99,192.168.0.101-192.168.0.254C. 192.168.0.1-192.168.0.255D. 192.168.0.1-192.168.0.1422. For user in local ppp secrets/ppp profiles database, it is possible toA. Allow/deny use of more than one login by this userB. Deny services (like telnet) only for this user or for one group of usersC. Allow only pppoe loginD. Set max values for total transferred bytes (up- and download)E. Allow login by pppoe and pptp, but deny login by l2tp23. Mark the queue types that are available in RouterOSA. PCQ Per Connection QueuingB. LIFO - Last In First OutC. SFQ Stochastic Fairness QueuingD. FIFO - First In First Out (for Bytes or for Packets)E. RED Random Early Detect (or Drop)F. DRR - Deficit Round Robin24. The RouterOS graphing is used forA. real-time traffic and resource usage displayB. average traffic and resource usage displayC. bandwidth testingD. bandwidth limitation25. To block users on my Local Area Network from accessing http://www.facebook.com between 8:00am and 5:00pmA. Only schedule a script to block http://www.facebook.com at 8:00am and allow at 5:00pmB. Add simple queue to block the site at 8:00am and allow it from 5:00pmC. Enable Webproxy, Transparent redirect http traffic, create access rule to drop http://www.facebook.com with a comment, schedule script to enable access rule at 8:00am and disable rule at 5:00pmD. Add firewall filter rule to block http://www.facebook.com and set time on the rule Mikrotik : RouterBOARD : Forum : MUM : Training : Wiki : Newsletters : Twitter