Panduan KRAI 2014

32
Kontes Robot ABU Indonesia 2014 KRAI - 2014 Menuju ABU ROBOCON 2014 Pune, India 18-22 Juni 2014 Direktorat Penelitian dan Pengabdian kepada Masyarakat Direktorat Jenderal Pendidikan Tinggi Kementerian Pendidikan Nasional, Jakarta

Transcript of Panduan KRAI 2014

Page 1: Panduan KRAI 2014

Kontes Robot ABU Indonesia 2014

KRAI - 2014

Menuju

ABU ROBOCON 2014 Pune, India

18-22 Juni 2014

Direktorat Penelitian dan Pengabdian kepada Masyarakat

Direktorat Jenderal Pendidikan Tinggi Kementerian Pendidikan Nasional,

Jakarta

Page 2: Panduan KRAI 2014

Panduan KRAI –2014 2

DAFTAR ISI

Hal

Sambutan Direktur Jenderal Pendidikan Tinggi 3

Sambutan Direktur P2M Dikti 4

Latar Belakang 5

Maksud dan Tujuan 5

Tema 6

Sistim Pertandingan 6

Waktu dan Tempat Pelaksanaan 7

Peserta 7

Tahapan Evaluasi 7

Penghargaan 8

Jadwal kegiatan 9

Alamat Penyelenggara 10

Informasi Lanjut 10

Lampiran A. Borang Pengajuan Peserta KRAI 2014 11

Lampiran B. Susunan Panitia KRI-2014 16

Lampiran C. Tema dan Peraturan ABU Robocon -2014 17

Page 3: Panduan KRAI 2014

Panduan KRAI –2014 3

Sambutan

Salah satu tujuan pendidikan tinggi adalah mengembangkan serta memperkaya khasanah ilmu

Pengetahuan dan Teknologi untuk meningkatkan kemakmuran dan kesejahteraan bangsa. Dalam

hal ini upaya penumbuhan dan pengembangan kreativitas serta inovasi mahasiswa menjadi kata

kunci utama untuk mendukung pencapaian tujuan tersebut. Dalam hal ini, selain wacana teoritis dan

konsepsional yang telah diberikan dilingkungan kampus kepada mahasiswa, perlu difasilitasi wacana

untuk melatih mahasiswa dalam implementasi ide dan gagasan mereka dalam dunia nyata. Kegiatan

pengembangan gagasan teoritis menjadi penerapan teknologi yang nyata tersebut harus dibuat

sedemikian rupa agar menjadi menarik, dinamis dan tidak membosankan, dimana dosen dan

mahasiswa perlu dilibatkan bersama secara multidisiplin.

Sehubungan dengan itu, saya menyambut baik penyelenggaraan Kontes Robot ABU Indonesia

(KRAI), karena dalam KRAI setiap peserta harus mengeksplorasi kemampuannya dalam

perancangan, implementasi, dan strategi serta harus mengembangkan ide-ide nya untuk dapat

membuat dan merancang suatu wahana bergerak berbentuk robot dengan berbagai bentuk dan

struktur serta kecerdasan agar dapat memenuhi tema dan aturan main yang telah ditentukan,

sehingga mahasiswa dapat berkompetisi secara sportif dalam arena yang telah ditentukan. Disinilah

pentingnya pengembangan kemampuan kreativitas, inovasi dan strategi oleh setiap tim peserta.

Oleh sebab itu, sejak awal dimulainya KRAI, Direktorat Jenderal Pendidikan Tinggi telah

memberikan dukungan penuh dan berkelanjutan terhadap pelaksanaan KRAI tersebut.

Dalam kesempatan ini Direktorat Jenderal Pendidikan Tinggi mengundang seluruh Perguruan Tinggi

di Indonesia untuk berpartisipasi dalam KRAI-2014 ini. Selamat berpartisipasi, semoga dengan

KRAI-2014, kemampuan mahasiswa dan kualitas pendidikan tinggi di Indonesia dapat ditingkatkan.

Jakarta, 1 Nopember 2013 Direktur Jenderal Pendidikan Tinggi

Prof.Dr. Ir. Djoko Santoso

Page 4: Panduan KRAI 2014

Panduan KRAI –2014 4

Sambutan

Untuk menumbuh-kembangkan ilmu Pengetahuan dan Teknologi serta meningkatkan mutu pendidikan tinggi di Indonesia, perlu di fasilitasi kegiatan yang dapat mendukung penumbuhan dan pengembangan kreativitas dan inovasi dosen beserta para mahasiswa, baik dari segi teoritis maupun penerapan praktis. Dalam hal ini Kontes Robot ABU Indonesia (KRAI) dapat merupakan suatu wacana yang sangat menarik bagi mahasiswa untuk mengimplimentasikan gagasan dan ide-ide mereka menjadi suatu robot yang fungsional dengan memanfaatkan pengetahuan mereka yang multi disiplin. Robot–robot tersebut harus dirancang dan dibuat sendiri, dengan menggunakan sensor-sensor, aktuator serta rangkaian elektronika dan mikrokomputer yang ada dan harus diprogramkan sesuai dengan tema kontes tahun ini. Selain itu kerjasama yang baik antara anggota tim peserta dan gagasan strategi yang terbaik juga akan menjadi faktor pendukung suksesnya suatu tim dalam kontes ini, sehingga akan dapat menimbulkan suasana kompetisi yang kondusif dikalangan mahasiswa, dosen maupun perguruan tinggi yang berpartisipasi dalam kontes tersebut.

KRAI-2014 akan dilaksanakan secara regional dan pemenang kontes regional akan dikirim mewakili wilayah/regional untuk bertanding dalam kontes nasional KRAI 2014 yang akan diselenggarakan di Yogyakarta pada tanggal 18-22 Juni 2014. KRAI-2014 diharapkan mampu menjadi wahana untuk unjuk prestasi dalam perancangan, implementasi dan strategi dari mahasiswa Indonesia, sekaligus sebagai tontonan dan hiburan yang menarik yang sarat dengan ide-ide pengembangan Ilmu Pengetahuan dan Teknologi. Pemenang dari kontes nasional KRAI-2014 akan berpeluang mewakili Indonesia dalam ABU Robocon 2014 di Pune -India.

Dalam kesempatan ini Direktorat Penelitian dan Pengabdian kepada Masyarakat, Direktorat Jenderal Pendidikan Tinggi, mendorong seluruh Perguruan Tinggi di Indonesia untuk berpartisipasi dalam KRAI-2014 ini. Selamat berpartisipasi, semoga dengan KRAI-2014 kemampuan mahasiswa dan dosen, serta kualitas pendidikan tinggi di Indonesia dapat terus ditingkatkan.

Jakarta, 1 Nopember 2013

Direktur Penelitian dan Pengabdian Kepada Masyarakat Direktorat Jenderal Pendidikan Tinggi

Prof. Dr. Ir. Agus Subekti.

Page 5: Panduan KRAI 2014

Panduan KRAI –2014 5

Latar Belakang

Tahun 2014 Indonesia kembali akan mengikuti kontes robot tingkat Internasional ABU Robocon 2014 yang akan berlangsung di Pune - India, pada tanggal 24 Agustus tahun 2014, dimana Tim Robot Indonesia akan berkompetisi dengan 20 tim Robot luar negeri. Lomba tersebut merupakan lomba yang ke-sebelas yang akan diselenggarakan di Pune – India dengan peserta dari negara-negara anggota Asia-Pacific Broadcasting Union (ABU). ABU adalah organisasi penyiaran dikawasan negara-negara Asia Pasifik yang beranggotakan lebih dari seratus stasiun televisi dan radio dari lima puluh Negara. Dalam hal ini Indonesia diwakili oleh Televisi Republik Indonesia sebagai anggota. Sehubungan dengan itu, Direktorat Penelitian dan Pengabdian kepada Masyarakat, Direktorat Jenderal Pendidikan Tinggi, Kementerian Pendidikan Nasional mengkoordinasikan. Kontes Robot Indonesia (KRI) sebagai ajang kompetisi rancang bangun dan rekayasa dalam bidang robotika, yang dalam pelaksanaan nya Kontes Robot Indonesia (KRI) terdiri dari 5(lima) divisi, yaitu

1. Kontes Robot ABU Indonesia (KRAI), 2. Kontes Robot Pemadam Api Indonesia(KRPAI) tipe beroda, 3. Kontes Robot Pemadam Api Indonesia(KRPAI) tipe berkaki, 4. Kontes Robot Seni Indonesia (KRSI) dan 5. Kontes Robot Sepak Bola Indonesia(KRSBI).

KRI dilaksanakan bekerjasama dengan Perguruan Tinggi yang ditunjuk untuk pelaksanaan Kontes tingkat regional dan Kontes tingkat Nasional. Tim yang mewakili Indonesia akan dipilih melalui seleksi dalam Kontes Robot ABU Indonesia 2014 (KRAI- 2014) yang akan diselenggarakan secara bertahap dimulai dengan Kontes Regional pada 5(lima) wilayah yaitu Padang, Jakarta, Semarang, Malang dan Mataram sesuai dengan jadwal yang telah ditentukan. Pemenang dari kelima Kontes Regional akan diikutsertakan dalam Kontes Nasional KRAI-2014 yang akan berlangsung pada tanggal 18-22 Juni 2014 di kota Yogyakarta. Dua puluh empat tim dari perguruan tinggi yang memenuhi persyaratan dan lolos seleksi regional dapat berpartisipasi dalam kegiatan Nasional KRAI-2014. Ketentuan pertandingan KRAI-2014 mengacu kepada aturan baku dari ABU Robocon 2014, dimana setiap tim terdiri dari 3(tiga) orang mahasiswa dan 1(satu) orang dosen pembimbing, yang akan merancang, membuat, mengoperasikan dan mengatur strategi robot manual dan robot otomatis yang akan digunakan. Pemenang Juara pertama kontes Nasional KRAI-2014 akan mewakili Indonesia dalam ABU Robocon 2014 yang dilaksanakan pada tanggal 24 Agustus 2014 di Pune - India,

Maksud dan Tujuan

Tujuan KRAI-2014 adalah:

1. Menumbuh-kembangkan dan meningkatkan kreatifitas mahasiswa di Perguruan Tinggi 2. Mengaplikasikan Ilmu Pengetahuan dan Teknologi ke dalam dunia nyata 3. Meningkatkan kepekaan mahasiswa dalam pengembangan bidang teknologi robotika 4. Membudayakan iklim kompetitif dilingkungan perguruan tinggi. 5. Menentukan tim terbaik dari lima wilayah sebagai wakil untuk mengikuti kontes robot nasional

KRAI-2014 di kota Yogyakarta. 6. Menentukan duta bangsa untuk mewakili Indonesia dalam ABU Robocon 2014 di Pune -India.

Page 6: Panduan KRAI 2014

Panduan KRAI –2014 6

Tema:

Tema untuk Kontes Robot ABU Indonesia (KRAI) 2014 adalah

“TAMAN BERMAIN ANAK INDONESIA”

Tema ini diselaraskan dengan tema yang telah ditentukan oleh ABU Robocon 2014 yaitu

“A SALUTE TO PARENTHOOD”

Sistim Pertandingan

• Setiap tim harus membuat satu robot manual sebagai robot-Ayah dan satu robot otomatis sebagai robot-anak, berat total robot tidak boleh melebihi 40 kg, batas tegangan catudaya tidak melebihi 24 V.

• Ukuran lapangan 12000mm x 12000mm, berbentuk persegi, dikelilingi balok kayu setinggi 50mm dan tebal 30mm, terbagi dua bagian berwarna merah dan biru sebagai zona-keluarga (parent-zone) untuk masing-masing tim Merah dan tim Biru yang bertanding.

• Arena lapangan pertandingan terdiri dari 5(Lima) zona-anak(Child-zone), dua zona-anak pertama adalah sama untuk masing-masing tim yang berisi Permainan Jungkat-Jungkit.

• Tiga zona-anak sisa-nya masing-masing terbagi dua ditengah dipisahkan dengan garis putih selebar 30mm dengan pita putih yang tidak mengkilap. Zona-anak ketiga berisi ayunan, dan yang ke-empat berisi tiang-manjat. Zona-anak ke-lima terletak ditengah arena lomba berisi Tangga manjat (jungle-gym), masing-masing memiliki bagian untuk tim merah dan tim biru.

• Arena Lomba juga memiliki dua buah start-zone berukuran 1000mm x 1000mm, satu berwarna merah untuk tim merah dan satu lagi berwarna biru untuk tim biru.

• Setelah pertandingan dimulai, robot-Ayah harus membawa robot-anak, berangkat dari start-zone masing-masing, menuju ke zona-anak pertama, kemudian meletakkan robot anak keatas jungkat-jungkit, lalu robot-Ayah harus bergerak ke sisi lain dari jungkat-jungkit tersebut, untuk mengayun jungkat-jungkit sebanyak 3(tiga) kali, kemudian membawa robot-anak melakukan permainan tiang manjat dan ayunan. Setelah menyelesaikan 3(tiga) permainan tersebut, robot-anak dibawa ke zona-anak yang ditengah untuk naik keatas tangga-manjat, dan sesampainya dilantai atas, langsung mengibarkan bendera melewati kepala nya.

• Apabila robot-anak berhasil menyelesaikan permainan terakhir ini, maka tim tersebut berhasil mencapai “SHABAASH” dan pertandingan dihentikan. Tim tersebut dinyatakan sebagai pemenang.

• Apabila dalam waktu 3(tiga)menit tidak ada tim yang berhasil mencapai “SHABAASH”, maka akan dihitung nilai yang berhasil dikumpulkan, dan tim yang mendapatkan jumlah nilai tertinggi setelah dikurangi dengan penalti, dinyatakan sebagai pemenang.

• Pertandingan hanya berlangsung selama 3(tiga) menit.

• Peraturan selengkapnya dapat dibaca pada lampiran C dari buku panduan ini.

Page 7: Panduan KRAI 2014

Panduan KRAI –2014 7

Waktu dan tempat Pelaksanaan :

KRAI-2014 akan dilaksanakan dua tahap, KRAI-2014 Tahap pertama dilaksanakan pertandingan secara Regional bertempat di lima kota, yaitu, Padang, Jakarta, Semarang, Malang dan Mataram dengan jadwal berurutan sebagai berikut :

1. Tanggal 24-27 April 2014, Regional 3, di Semarang. 2. Tanggal 01-04 Mei 2014, Regional 4, di Malang. 3. Tanggal 08-11 Mei 2014, Regional 2, di Jakarta. 4. Tanggal 15-18 Mei 2014, Regional 1, di Padang. 5. Tanggal 22-25 Mei 2014, Regional 5, di Mataram.

Tiga pemenang dari KRAI tingkat Regional, yaitu Juara pertama, Juara Kedua dan Juara Ketiga, akan dibiayai untuk mengikuti Pertandingan KRAI tingkat Nasional yang akan dilaksanakan pada tanggal 18-22 Juni 2014 bertempat di Universitas Negeri Yogyakarta di Yogyakarta. Peserta kontes Nasional KRAI-2014 ditentukan sebanyak 24(duapuluh empat) tim, yang terdiri dari 15(limabelas) tim merupakan kelompok tiga pemenang masing-masing kontes Regional dan 9(sembilan) tim lainnya yang akan ditentukan oleh dewan Juri Nasional berdasarkan rangking hasil dari evaluasi Tim Juri dalam ke-lima pertandingan regional yang telah dilaksanakan. Akomodasi peserta selama kontes regional akan ditentukan oleh Panitia pelaksana kontes regional, sedangkan untuk peserta kontes nasional KRAI-2014 akan ditentukan oleh panitia kontes Nasional.

Peserta

KRAI 2014 dapat diikuti tim mahasiswa dari institusi atau perguruan tinggi Negeri dan perguruan tinggi Swasta yang terdaftar di Dikti. Setiap tim terdiri atas 3(tiga) mahasiswa dan 1(satu) dosen pembimbing. Setiap Tim calon peserta harus mengajukan proposal kepada panitia pusat 2014 dengan persetujuan Wakil Rektor/Ketua/Direktur Bidang Kemahasiswaan masing-masing Perguruan Tinggi. Formulir pengajuan (Application Form) dapat dilihat pada lampiran A. Proposal merupakan Registrasi awal yang harus diajukan kepada Panitia KRI-2014. Setiap tim harus mengirimkan 1 (satu) set proposal ke alamat panitia pusat melalui pos/paket kilat dan selambat-lambatnya sudah diterima di sekretariat panitia tanggal 07 Januari 2014. Setiap Perguruan Tinggi hanya diperkenankan untuk mengirim satu Tim peserta KRAI. Semua proposal yang masuk ke sekretariat panitia akan dievaluasi oleh panitia.

Tahapan Evaluasi Evaluasi dilakukan dalam beberapa tahap yaitu: Evaluasi tahap pertama merupakan evaluasi administratif. Proposal yang diterima dan disetujui oleh panitia pusat akan diberitahukan kepada calon peserta melalui surat pemberitahuan ke alamat masing-masing dan melalui website DP2M DIKTI paling lambat 2(dua) minggu setelah batas akhir penerimaan proposal.

Page 8: Panduan KRAI 2014

Panduan KRAI –2014 8

Evaluasi tahap kedua dilakukan melalui laporan kemajuan dalam rekaman CD yang dibuat oleh peserta. Setiap calon peserta yang telah terdaftar diwajibkan untuk membuat laporan kemajuan dan perkembangan pembuatan robot dalam sebuah CD dan mengirimkannya kepada panitia pusat. CD berisi formalitas tim berupa sebuah foto robot dan anggota Tim berlatar belakang Institusi, presentasi powerpoint dan satu rekaman video dengan durasi maksimal 5(lima) menit dengan format mp4, mpeg/mpg, flv, avi atau mov. Video harus terang dan jelas menunjukkan kemampuan maksimal aktivitas robot manual dan robot otomatis. Dilarang memberikan tambahan latardepan atau latarbelakang yang menghalangi gambar robot yang sedang ditunjukkan dalam rekaman video. Setiap Tim diwajibkan mengirimkan bahan-bahan tersebut dalam 1(satu) CD dengan label yang jelas dalam amplop pelindung yang baik agar kualitas CD terjamin dan tidak rusak, disertai dengan surat pengantar dari Pembantu/Wakil Rektor/Direktur/Ketua bidang kemahasiswaan dan harus diterima panitia selambat-lambatnya tanggal 06 Maret 2014.

Kriteria evaluasi yang digunakan adalah :

• Kemajuan rancang bangun Mekanik Robot

• Sistem Kontrol Robot, Sensor dan Rangkaian Interface

• Strategi mengikuti dan memenangkan pertandingan

• Kemampuan Maksimal Robot sampai pada tahapan evaluasi ini. Evalusi tahap ketiga dilakukan melalui pertandingan KRAI tingkat regional yang akan dilaksanakan di lima tempat. Regional I bertempat di Padang, Regional II bertempat di Jakarta, Regional III bertempat di Semarang, Regional IV bertempat di Malang dan Regional V bertempat di Mataram. Peserta yang lolos evaluasi tingkat regional dan mengikuti KRAI–2014 tingkat nasional di kota Yogyakarta, akan mendapatkan dana bantuan pembuatan robot sebesar Rp 6,000,000,-(enam Juta Rupiah) dari panitia, biaya transportasi kelas ekonomi dari perguruan tinggi ke tempat pelaksanaan KRAI Nasional dan akomodasi Tim, terdiri dari 3(tiga) mahasiswa dan 1(satu) dosen pembimbing selama 4 (empat) hari.

Penghargaan Panitia menyediakan penghargaan bagi Tim Robot Juara Pertama, Juara Kedua, Juara Ketiga, Juara Harapan, Desain terbaik, Strategi terbaik dan penghargaan lain yang akan ditentukan oleh panitia kemudian. Juara kontes Nasional KRAI-2014 akan mewakili Indonesia dalam ABU Robocon 2014 yang dilaksanakan pada tanggal 24 Agustus 2014 di Pune - India, dan menerima piala bergilir Kontes Robot Indonesia yang bernama Sambhawana Pratimacala.

Page 9: Panduan KRAI 2014

Panduan KRAI –2014 9

Jadwal Kegiatan

Jadwal kegiatan KRAI-2014 adalah sebagai berikut:

Kegiatan dan tanggal penting yang harus diingat:

Kegiatan Tanggal Lokasi

1 Batas waktu Proposal Masuk 07 Januari 2014 Depdiknas P2M Dikti

2 Pengumuman Peserta hasil Evaluasi Tahap Pertama 20 Januari 2014 Depdiknas P2M Dikti

3 Batas waktu Laporan Kemajuan 06 Maret 2014 Depdiknas P2M Dikti

4 Pengumuman Peserta Tingkat Regional 14 Maret 2014 Depdiknas P2M Dikti

5 Kontes Tingkat Regional :

KRAI Regional 1 15-18 Mei 2014 Padang

KRAI Regional 2 08-11 Mei 2014 Jakarta

KRAI Regional 3 24-27 April 2014 Semarang

KRAI Regional 4 01-04 Mei 2014 Malang

KRAI Regional 5 22-25 Mei 2014 Mataram

6 Pengumuman Peserta Tingkat Nasional 30 Mei 2014 Depdiknas P2M Dikti

7 Pelaksanaan KRAI-KRCI-KRSI-KRSBI Tingkat Nasional 18-22 Juni 2014 Yogyakarta

Page 10: Panduan KRAI 2014

Panduan KRAI –2014 10

Alamat Penyelenggara

Panitia Pusat Kontes Robot Indonesia 2014 Subdirektorat Kreativitas dan Pengabdian kepada Masyarakat (KPM) Direktorat Penelitian dan Pengabdian kepada Masyarakat (Dit litabmas) Direktorat Jenderal Pendidikan Tinggi Kementerian Pendidikan Nasional. Gedung D, lantai 4. Jln Jenderal Sudirman, Pintu 1 Senayan Jakarta Pusat 10270 Telp. 021 57946100 ext.0433, Fax. 021-5731846, 57946085 Website : http://dikti.go.id : http://kri.eepis-its.edu E-mail : [email protected],

[email protected] [email protected]

Mailing list : [email protected]

Informasi Lanjut

Panitia akan menerbitkan FAQ (Frequently Asked Questions) dalam website mengacu pada website resmi ABU Robocon 2014, Pune - India, dan akan memberikan jawaban dan arahan dalam milis: [email protected], Tim Peserta dapat juga langsung membuka situs resmi ABU Robocon 2014 di alamat : http://www.roboconindia.com

Page 11: Panduan KRAI 2014

Panduan KRAI –2014 11

Lampiran A

Borang Pengajuan Peserta

KRAI - 2014

Page 12: Panduan KRAI 2014

Panduan KRAI –2014 12

KONTES ROBOT ABU INDONESIA 2014

“TAMAN BERMAIN ANAK INDONESIA”

(“A SALUTE TO PARENTHOOD”)

Borang Pendaftaran

1. Setiap Perguruan Tinggi hanya diperkenankan mengirim maksimum satu

proposal KRAI kepada panitia pusat. 2. Borang aplikasi harus disetujui oleh Pembantu/Wakil/Direktur/Ketua/Rektor

bidang Kemahasiswaan 3. Borang aplikasi dan proposal harus sudah diterima panitia Kontes Robot

Indonesia 2014 paling lambat tanggal 07 Januari 2014, dengan alamat:

Panitia Pusat Kontes Robot Indonesia 2014 Subdirektorat Kreativitas dan Pengabdian kepada Masyarakat(KPM) Direktorat Penelitian dan Pengabdian kepada Masyarakat (Dit litabmas) Direktorat Jenderal Pendidikan Tinggi Kementerian Pendidikan Nasional. Gedung D, lantai 4. Jln Jenderal Sudirman, Pintu 1 Senayan Jakarta Pusat 10270 Telp. 021 57946100 ext.0433, Fax. 021-5731846, 57946085

4. Proposal terdiri dari bagian satu dan bagian dua, yang dijilid dengan kulit warna merah tua jadi satu bendel (jilid), berisi informasi lengkap tentang nama anggota tim, nama pembimbing, institusi, alamat lengkap, nomor telepon, e-mail, dan nomor hp, yang mudah dihubungi, serta informasi lengkap tentang robot yang akan dibuat meliputi desain, gambar konstruksi, strategi, dan algoritma pengendalian robot dan lainnya.

5. Proposal tidak boleh melebihi maksimal 25(duapuluh lima) halaman termasuk semua gambar, daftar isi dan lampiran.

6. Masing-masing tim mengirimkan satu set proposal kepanitia KRI 2014. 7. Proposal akan diseleksi Panitia KRI sesuai dengan kriteria seperti telah

disebutkan dalam buku panduan KRAI. Tim yang lolos seleksi administrasi akan diumumkan pada tanggal 20 Januari 2014.

Page 13: Panduan KRAI 2014

Panduan KRAI –2014 13

BAGIAN SATU : INFORMASI RINCI DARI TIM

1. TIM PESERTA

Nama Tim (Maksimum 15 huruf, gunakan nama yang mudah dibaca.) :

Nama Ketua Tim ( Nama mahasiswa ) :

Nama Anggota Tim: 1. 2.

Nama Pembimbing ( Contact Person )

2. INSTITUSI

Nama Politeknik/Institut/Universitas lengkap

Alamat Jelas :

Nomor Telepon:

Nomor Fax. :

Alamat e-mail :

3. Alamat lengkap yang mudah dihubungi, telepon, Fax dan e-mail.

(contact person address)

4. ROBOT Jumlah Robot

(a) Robot Manual(Robot-Ayah) (b) Robot Otomatis(Robot-Anak)

1 unit 1 unit

Page 14: Panduan KRAI 2014

BAGIAN DUA : INFORMASI LENGKAP MENGENAI ROBOT 1. Nama Tim : ______________________________

(gunakan nama tim yang mudah dibaca, maks. 15 huruf)

2. Robot :

Jumlah Robot

(a) Robot Manual (Robot-Ayah) (b) Robot Otomatis (Robot-Anak)

1 unit 1 unit

Jelaskan mengenai Robot yang akan dibuat dan strategi yang akan digunakan dengan gambar setiap unit robot. Gunakan halaman tambahan bila dirasa kurang untuk menggambarkan masing-masing unit robot.

(a) Robot Manual (Robot-Ayah)

• Ukuran robot (pada saat start dan setelah start bila ukurannya bertambah)

• Struktur dan bahan

• Cara mengambil/mengangkat objek dan mengidentifikasi posisi (struktur / device / sensors / sistem dll.)

• Sistem kendali robot

Gunakan halaman tambahan bila dibutuhkan.

(b) Robot Otomatis (Robot-Anak) • Ukuran robot (ukuran maksimal saat start dan saat setelah start )

• Struktur dan Bahan

• Cara melakukan kegiatan permainan.

• Tipe dan cara kendali gerakan robot otomatis.

• Tambahkan keterangan lain yang perlu untuk robot.

Gunakan halaman tambahan bila dibutuhkan.

Page 15: Panduan KRAI 2014

Panduan KRAI –2014 15

3. STRATEGI

Jelaskan bagaimana strategi robot otomatis dan robot manual untuk bekerja mendapatkan nilai selama pertandingan. (Robot-Ayah membawa Robot-Anak, mencari posisi mainan, bagaimana cara bermain dan gerakan robot-anak, serta hal-hal yang lain nya)

Gunakan halaman tambahan bila dibutuhkan..

4. SKETSA GAMBAR

Sketsa gambar desain dengan ukuran lengkap untuk masing-masing robot. Tambahkan gambar lengkap jika diperlukan. Perlu diingat bahwa gambar tidak diperbolehkan untuk mencantumkan nama anggota tim, institusi atau lain.

Gunakan halaman tambahan bila dibutuhkan.

Page 16: Panduan KRAI 2014

Panduan KRAI –2014 16

Lampiran B

Susunan Panitia Kontes Robot Indonesia (KRI) 2014

Pelindung : Menteri Pendidikan Nasional

Komisi Pengarah :

• Dirjen Pendidikan Tinggi, Depdiknas.

• Direktur Penelitian dan Pengabdian pada Masyarakat, Depdiknas

• Rektor Universitas

• Direktur Utama TVRI

Ketua Pelaksana : • Dekan Fakultas Teknik

Wakil Ketua Pelaksana :

• Universitas

• DIKTI

Sekretaris : • DIKTI

• Universitas

Publikasi dan Dokumentasi : • TVRI

• Universitas

• DIKTI

Bendahara : • Universitas

• DIKTI

Acara dan Pertandingan : • DIKTI

• Universitas

• UI

• ITS

• PENS

• ITB

• POLBAN

• UGM

Perlengkapan :

• Universitas

• DIKTI

Akomodasi :

• DIKTI

• Universitas

Transportasi :

• DIKTI

• Universitas

Dana :

• DIKTI

• Universitas

Keamanan :

• DIKTI

• Universitas

Page 17: Panduan KRAI 2014

Lampiran C

Tema dan Peraturan

ABU ROBOCON - 2014

Page 18: Panduan KRAI 2014

Panduan KRAI –2014 18

“The Objective”

Two (2) teams play various game activities in the park with their Parent robot and Child

robot. The Parent robot has to carry Child robot up-to the play zone and the Child robot plays

game activity. Each team plays three (3) game activities such as Seesaw, Pole walk and

Swing.

Once the Child Robot completes three (3) activities, it can challenge the fourth game activity,

which is set in the middle of the park.The team successfully completing the fourth game

activity first; accomplishes“SHABAASH” (appreciation) and is declared “The Winner”.

1. About Safety

1.1. Foreword

1.1.1. Safety is the most important issue to continue the Robot Contest to the future.

Therefore every participant has a duty of developing robot safely.

1.1.2. Besides an ethical aspect, keeping workplace safety will not only minimize the delay

of robot development but also promote the completion of robot according to the schedule in

case of accident. (An accident could lead to discontinuation and/or delay of project due to

workers’ injury, investigation of the accident and implementation of the recurrence

preventive measures)

1.2. Observance of a statute

Every participant in the Robocon project who builds robot must observe the related laws,

regulations and ‘Safety and Health Guidelines’ defined by the participant’s university or

equivalent regulations. Participants must develop, build and practice robot safely under the

supervision and instruction of the university instructor. On the contest day, sufficient safety

should be considered to the staff and the audience in the venue.

1.3. Safety measures

Due to robot operator’s operation mistake or by a reckless run of a control system or fracture

of parts, the robot could stop, accelerate and turn suddenly causing the operator to collide

with the robot’s sharp parts (cut surface of the structure) or come into contact and be caught

in the movable parts (such as gears) and crush the ambient environment. Therefore, in

addition to following examples, please take necessary safety measures.

1.4. Proposals for measures (examples)

1.4.1. As structural measures, securing front view, covering sharp parts or attaching cover to

movable parts, should be considered.

1.4.2. As personal protective measures, wearing helmet protective glasses, gloves and

clothing which is not easily caught in the robot, etc., should be considered.

Page 19: Panduan KRAI 2014

Panduan KRAI –2014 19

1.4.3. As operational measures, placing emergency staff who can carry out emergency stop

in addition to the operator, avoiding practice alone so that members can immediately respond

to an accident, implementation of various checks, re-examination of practice environment,

keeping the workplace clean and etc., should be considered.

1.5. Due to design mistake or reconstruction of the robot, overcurrent to a circuit, short

circuit of the battery by a shock or a fire could cause a major accident. In addition to the

following examples, please take necessary safety measures.

1.6. Proposals for measures (examples)

1.6.1. As structural measures, re-examination of fuse, wiring of suitable thickness,

attachment position and isolation from combustibles etc., should be considered.

1.6.2. As operational measures, prohibiting disapproval reconstruction and using suitable

battery charger etc., should be considered.

1.7. Other

1.7.1. In addition to above, various dangerous events could be triggered by the unique feature

of each robot. Please take effective safety measures according to the characteristics of an

individual robot.

1.7.2. To ensure safety, when using a laser beam, it must be less than a Class 2 laser, and

used in a way that will not harm any operators, the referees, match officials, audience,

opponent’s equipment and the game field.

2. Game and Rules

“The Objective”

Two (2) teams play variousgame activities in the park with their Parent robot and Child

robot. The Parent robot has to carry Child robot up-to the play zone and the Child robot plays

game activity. Each team plays three (3) game activities such as Seesaw, Pole walk and

Swing.

Once the Child Robot completes three (3) activities, it can challenge the fourth game activity,

which is set in the middle of the park.The team successfully completing the fourth game

activity first; accomplishes “SHABAASH” (appreciation) and is declared “The Winner”.

If no team is able to perform abovementioned winning task, the winner will be decided as per

the stated rules.

3. Game field and Objects

(Refer game field Figure-1and Figure- 2 for titles and dimensions)

3.1. The field consists of an area having the dimension of 12000 mm x 12000 mm

surrounded by a wooden fence with a height of 50 mm and a thickness of 30mm.

Page 20: Panduan KRAI 2014

Panduan KRAI –2014 20

3.2. The competing teams are Red and Blue teams. The game field has two (2) Parent zones

,one (1) Red and one (1) Blue, and five (5) Child zones (game activity zones). A child robot

plays game activities in the Child zones. The first game activity for both teams (Red and

Blue) is identical and at separate location in the respective zones. For remaining activities

each Child zone is divided into two (2) halves by 30 mm wide non shiny white tape.

Every team is supposed to play in their own Child zone area.

3.3. The game field also consists of one (1) Blue and one (1) Red start zone for each team.

The area of each start zone is 1000 mm x 1000 mm.

3.4. Game activities to be played in Child zones are listed as

3.4.1. Seesaw child zone: Separate for Red and Blue team (Refer Figure-3)

3.4.2. Pole walk child zone (Refer Figure-4)

3.4.3. Swing child zone (Refer Figure-5)

3.4.4. Jungle gym child zone (Refer Figure-6)

3.5. Jungle gym child zone is placed at the centre of the game field.

4. Teams

4.1. Each team comprises of four (4) members consisting of three (3) students and one (1)

instructor, all from the same university, polytechnic or college. Only three (3) students are

permitted to enter the game field.

4.2. Team members must be enrolled in their University/Polytechnic/College at the time of

the international contest. Exceptions to this rule are those who were enrolled in a

University/Polytechnic /College at the time of the domestic contest.

4.3. Postgraduate students are not eligible to participate in the competition.

5. Robots

Each team must design and construct by itself one (1) Parent robot (manually operated) and

one (1) Child robot (autonomously controlled)to compete in the contest.

5.1. Parent robot

5.1.1. The Parent robot should be operated through a cable connected to it. Wireless radio

control is not permitted. Operators are not permitted to ride on their robot.

5.1.2. When operating via cable, the point where the cable is connected to the robots must be

at least 900 mm above the ground. The length of the cable from the Parent robot to the

control box should at least be 1000 mm or more but should not exceed 2000 mm.

5.1.3. In the Starting zone, just before the game begins the size of the Parent robot loaded

with Child robot cannot exceed (1000 mm L x 1000 mm W x 1000 mm H). Once the game

Page 21: Panduan KRAI 2014

Panduan KRAI –2014 21

begins the Parent robot may change its form but the size of the Parent robot including the

Child robot cannot exceed the size of a cube of 1500mm during the game.

5.1.4. Team members are not allowed to touch the Parent robot once the game has begun

except for the “retry”

5.1.5. A parent robot is permitted to operate in its own Parent zone(Red or Blue)

5.1.6. A portion of a Parent robot can enter the air space of its own Child zone but cannot

touch its floor.

5.1.7. Robots of a team are not permitted to touch any of the opponent’s robots.

5.1.8. Parent robot cannot split or separate into two (2) or more units.

5.1.9. Space for pasting stickers /tags (by organizers of the contest) is to be provided on

Parent robot. This space should be the size 150 mm x 100 mm

5.2. Child robot

5.2.1. A child robot will neither have wheels nor tracks for locomotion. It can have arms and

legs.

5.2.2. A child robot is not permitted to touch the floor area of the Start zone and Parent zone.

5.2.3. Child robot must operate autonomously.

5.2.4. After placing the Child robot in the Child zone, the Parent robot starts the Child robot

through a single action.

5.2.5. Once the Child robot starts, no team member is permitted to touch the robots except in

the case of “retry”.

5.2.6. The child robot’s size and form may undergo a change during the game, but it should

fit into a cube of 500 mm at all times.

5.2.7. Child robot cannot split or separate into two (2) or more units.

5.2.8. Space for pasting stickers /tags (by organizers of the contest) is to be provided on

Child robot. This space should be the size of 150 mm x 100 mm

5.3. “Retry” of Parent and Child robot

5.3.1. For Parent and Child robot, any number of “retry” is permitted.

5.3.2. During a “retry”, a Child robot has to take a “retry” by loading itself on the Parent

robot in the Parent zone.

5.3.3. After the Child Robot asked for a retry and it is granted, the Child Robot must restart

on the Parent Robot. The point of restart is where the Child Robot asked for a retry.

5.3.4. Strategies based on “retry” are not permitted.

Page 22: Panduan KRAI 2014

Panduan KRAI –2014 22

5.3.5. On a “retry”, no parts of the robot should be replaced; power sources of the robots

should not be recharged. One cannot add a power source also.

5.4. Power Supply for robots

5.4.1. Each team shall prepare its own power supply for its robots.

5.4.2. Voltage of the power supply for robots shall not exceed 24 V DC on load.

5.4.3. A power supply that is considered dangerous or unsuitable by the contest committee

shall not be permitted.

5.4.4. The pressure of the compressed air power (if any) must be less than 6 bars.

5.5. Weight

Parent and Child robots including their power sources, cables, remote controller and other

parts of each robot shall be weighed prior to the competition. The total allowable weight of

all robots and above accessories for each team to be used throughout the contest must not

exceed 40 Kg. The total weight of 40 Kg does not include spare batteries and components

with same specifications.

5.6. Robot Specifications

Size and weight of each robot will be measured before the competition. Robots that are not

made in conformity with this rulebook will not be allowed to participate in the contest.

6. The Competition and Scoring

6.1. Matches

6.1.1. Each match shall last for a maximum of three (3) minutes.

6.1.2. Both the teams have to play Seesaw as their first game activity during the match. The

team which completes Seesaw can attempt either Swing or Pole walk as per their choice.

However, completing the Swing and Pole walk is must for a team to be eligible to attempt

Jungle gym.

6.1.3. The team which completes the fourth game (Jungle gym) first, accomplishes

“SHABAASH” and will be declared a winner and the match ends there itself.

6.1.4. In-case, none of the teams is able to complete the fourth game(Jungle gym) or a tie

happens for “SHABAASH”, winner will be declared as per the following order of priority:

6.1.4.1 Team with maximum score after considering violations

6.1.4.2. Team completing all three (3) games (Seesaw, Pole walk and Swing) in minimum

time

6.1.4.3. Team completing two (2) different games in minimum time with the first activity

being See saw.

Page 23: Panduan KRAI 2014

Panduan KRAI –2014 23

6.1.4.4. Team completing Seesaw in minimum time

6.1.4.5. If there is a tie after that also, the Judges and Referees decide the winner.

6.2. Competition Rules

A parent robot holding a Child robot starts from the Start zone and reaches to its own Seesaw

child zone and completes the activity as follows.

6.2.1. Seesaw

6.2.1.1. Parent robot makes the Child robot sit on the Seesaw seat leaving the Child robot

untouched.

6.2.1.2. Child robot should sit on the seat of Seesaw. Child robot is permitted to touch the

seat and the handle next to the seat, in order to remain seated on Seesaw.

6.2.1.3. Parent robot should move to opposite side and without sitting on the Seesaw it has to

play with Child robot and complete three (3) continuous laps.

6.2.1.4. Parent robot reloads the Child robot upon itself.

6.2.1.5. Completion of a lap’ means that: Seesaw seat of Child robot and seat opposite to that

should touch the floor one after the other for each lap.

6.2.1.6. The counting of lap starts, once the seat at Parent robot side touches the Seesaw child

zone for the first time after successful placement of Child robot.

6.2.1.7. During the laps the Child robot should not touch the floor area of Seesaw child zone.

6.2.2. After completing the Seesaw activity, a team is eligible to play either Pole walk or

Swing.

6.2.3. Pole walk

6.2.3.1. The Parent robot places the Child robot on its own colour disc and leaves the Child

robot untouched.

6.2.3.2. Child robot should remain on the disc of its own colour.

6.2.3.3. Child robot is allowed to touch the disc and portion of the pole above the disc while

performing the act of disc walk.

6.2.3.4. The Child robot has to walk (travel) on discs and complete the path from disc to disc

without skipping any one of its own colour discs and also without touching the floor area of

Pole walk child zone.

6.2.3.5. Parent robot reloads the Child robot upon itself.

6.2.4. Swing

6.2.4.1. Parent robot places Child robot on its own colour seat of swing and leaves the Child

robot untouched.

Page 24: Panduan KRAI 2014

Panduan KRAI –2014 24

6.2.4.2. Child robot is permitted to touch the seat of swing and side chains.

6.2.4.3. Parent robot can initiate swinging for the first lap without touching the Child robot.

Next two (2) laps should be performed by the Child robot by itself. However Parent robot

can assist Child robot to stop the swinging.

6.2.4.4. Parent robot reloads the Child robot upon itself.

6.2.4.5. Completion of lap’ means that: Any part of the Child robot has to touch the flag kept

next to the Swing in order to complete one (1) lap and complete such three (3) continuous

laps.

6.2.4.6. No part of the Child robot is allowed to touch the floor area of Swing child zone

during the laps.

6.2.5. Only after completing all the three (3) earlier games, a team is eligible to play Jungle

gym

6.2.6. Jungle gym

6.2.6.1. Parent robot keeps Child robot on or near the first step of ladder and Parent robot

leaves the Child robot untouched.

6.2.6.2. The Child robot climbs the ladder without touching side rails and places itself

completely on the top platform of Jungle gym.

6.2.6.3. A preloaded flag (Refer Figure-7) is to be raised by Child robot after getting placed

itself on the top platform. Action of raising the flag will enable the team to achieve

“SHABAASH”. The teams should make their own flags as per Figure-7

6.2.6.4. In order to achieve “SHABAASH” the flag should be raised above the topmost point

of the Child robot.

6.2.6.5. After successfully completing the Jungle gym by a team first, it accomplishes

“SHABAASH” and is declared as winner and the match ends there itself.

6.3. Scoring

6.3.1. Only after successfully completing all the tasks of any game; the game will be

considered as “complete” and teams earn points specified for that game.

6.3.2. To earn additional points, Seesaw maybe attempted for maximum three (3) times (of

three (3) laps each). To earn additional points Pole walk and Swing maybe attempted for

maximum two (2) times.

6.3.3. On a “retry” for Seesaw and Swing, counting of lap will restart from the first count.

Prior lap(s) in this case will not be counted.

6.3.4. Points are awarded:

Page 25: Panduan KRAI 2014

Panduan KRAI –2014 25

6.3.4.1. Completion of the first game (Seesaw) = 10 points for every completion (Can be

attempted for maximum of three (3) times to earn additional points)

6.3.4.2. Completion of the second game (Pole walk or Swing) = 20 points for every

completion (Can be attempted for maximum two (2) times to earn additional points)

6.3.4.3. Completion of the third game (remaining out of Pole walk or Swing) = 50 points for

every completion (Can be attempted for maximum two (2) times to earn additional points)

6.3.4.4. Completion of the fourth game (Jungle gym) makes the team accomplish

“SHABAASH”. No point for this game and the match ends there itself.

7. Violations and Deduction of Points

Once a game begins, the following actions will be regarded as violations and two (2) points

will be deducted for each occurrence.

7.1. A violation occurs if any robot of a team touches an opponent’s robots

7.2. A violation occurs when a Parent robot or a team member touches the floor area of Child

zone except in the case of “retry”.

7.3. A violation occurs when Parent robot operator enters the air space of the Child zone

except in the case of “retry”.

7.4. A violation occurs when Parent and/or Child robot of any team enters into an opponent’s

zone or air space above it.

7.5. A violation occurs when Child robot touches the floor area of Start zones, and Parent

zone.

7.6. A violation occurs when Child robot during the action intentionally touches the floor

area of Seesaw, Swing and Pole walk

7.7. A violation occurs when a team performs prohibited act as stated in rulebook and FAQs.

8. Disqualification

The following behaviours shall be considered as “disqualifications of the team” by the

Judges and Referees for a particular match. The team will cease to continue with game and

the score for that match for that team will not be recorded.

8.1. Causing or attempting to damage the game field, the equipment on the field or the

opponent’s robots.

8.2. Members of a team touching their own robots intentionally during the game.

8.3. A robot or any team member(s) intentionally blocking, touching or attacking the

opponent’s robots directly or indirectly. However if the robots of any team move or fall into

restricted areas by an accident it should be removed immediately as per Referee’s

Page 26: Panduan KRAI 2014

Panduan KRAI –2014 26

instructions. (The referee is empowered to determine whether it is an accident or not) Retry

may be allowed after that.

8.4. Two (2) False Starts in a match (Parent robot being started before the Referee signals a

start.)

8.5. Performing any act against the spirit of fair play and friendship between participating

teams.

8.6. Persistently using the cable to guide or pull the Parent robot.

8.7. The team that does not follow the instruction or warning of the Referee.

8.8. Use of communication (such as IR, RF, LASER etc.) between the robots.

8.9. Team not complying point number 6.2.2 and 6.2.5

9. Others

9.1. For any other behaviour not specified in the rules, referees are given full authority to

make a decision and their decision is final in the event of a dispute.

9.2. Any amendments to these rules will be announced by the Contest committee and be

updated on website <www.roboconindia.com> under FAQ.

9.3. All teams are encouraged to decorate the robots to reflect the culture, aesthetics and

styles of their respective countries.

9.4. All robots must be designed and made by student teams. Readymade commercial robots

will be disqualified from being used. Teams are not allowed to have sponsor’s logo

anywhere on the robots or on the uniform.

9.5. When requested by the contest committee, each participating country will be asked to

provide information on their robots, including the video, which explains the structure and the

movement of the participating team’s robots. The contest committee will verify whether each

participating robots complies with the rules through viewing the videos, prior to the shipment

of the robots.

9.6. When using optical sensors teams must consider the fact that there will be very bright

lights on the game field for video recording and broadcasting purposes.

9.7. Domestic winner teams should take into account the constraints of transporting batteries

via airline services before sending robots for international event.

9.8. The allowable margin of error to the objects in this Rulebook wherever not mentioned is

± 5% both in weight and size.

9.9 Teams should consider the operational height of the Child robot during the game

Page 27: Panduan KRAI 2014

Panduan KRAI –2014 27

APPENDIX

A. MATCHES

The contest is played according to the following format:

Preliminary Rounds: Round robin within groups.

Winner from each group shall advance to the Quarter-Final.

Quarter-finals: Knock out matches.

Semi-Finals: Knock out matches.

Finals:Knock out match.

B. AWARDS

Prizes shall include awards for the winners, runner-ups, best idea, best technology, and best

design and ABU Robocon award, Sponsors’ awards.

Page 28: Panduan KRAI 2014

Panduan KRAI –2014 28

Page 29: Panduan KRAI 2014

Panduan KRAI –2014 29

Page 30: Panduan KRAI 2014

Panduan KRAI –2014 30

Page 31: Panduan KRAI 2014

Panduan KRAI –2014 31

Page 32: Panduan KRAI 2014

Panduan KRAI –2014 32