Module 1 Hysys

212
1. Pr ocess Simulation Overview  

Transcript of Module 1 Hysys

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 1/212

1. Process

Simulation

Overview 

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 2/212

TujuanSetelahSetelah menyelesaikanmenyelesaikan modul modul ini ini ,,

 peserta peserta diharapkandiharapkan mampumampu ....................

• Menentukan proses simulator yang sesuai

• Menggambarkan bagaimana proses simulatorbekerja

• Menentukan informasi yang diperlukan dalam

menggunakan proses simulator• Familiar dengan HYSYS

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 3/212

Preview •• Process Simulator Process Simulator 

– Apakah mereka?

– Bagaimana mereka digunakan?– Menentukan satu yang tepat?

•• PengenalanPengenalan Process Simulator Process Simulator 

-- Problem 1Problem 1 – – PhasePhase campurancampuran gasgas-- Problem 2 Problem 2  – – BubbleBubble--Point Point campurancampuran gasgas-- Problem 3Problem 3 – – Dew Dew --Point Point campurancampuran gasgas-- Problem 4Problem 4 -- Valve & Separator Valve & Separator 

-- Problem 5 Problem 5  – – Reaksi Reaksi PembakaranPembakaran CH4CH4

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 4/212

Process Simulator 

Peralatan matematika yang memodelkan proses dengan aliran

material dan energi yang kontinu

dari satu unit operasi ke unit  berikutnya.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 5/212

Process Simulator minimal dapat menghitung 

• Laju alir setiap aliran termasuk aliran balik (recycle).

• Kondisi operasi setiap aliran, misal pressure dantemperature.

• Sifat-sifat fisis setiap aliran, misal berat molekul, density,tekanan uap, viskositas, titik kritis.

• Komposisi fasa secara kualitatif dan kuantitatif darisetiap aliran, biasanya dapatdilihatdari diagram fasa.

• Beban panas atau tenaga dari masing-masing peralatan,

misal beban panas untuk heat exchanger danhorsepower suatu kompressor.

• Seluruh perhitungan yang dilaksanakan secara simultan.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 6/212

Process Simulator diharapkan dapat menghitung 

• Bermacam-macamperhitungan Equation of State, misalPeng-Robinson, Soave Redlich Kwong, Van Laar,

Margules, Modified Van Laar. Semakin banyak pilihanEquation of State semakin menentukan kualitas suatusimulator, sebab tidak setiap sistemcocok untuk suatumodel Equation of State tertentu.

• Spesifikasi aliran, misal kemurnian dari suatu komponendi dalmsuatu aliran.

• Study kasus dengan memvariasikan variabel-variabeltertentu.

• Plot Diagram Phase

• Unit konversi secara automatik.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 7/212

Process Simulator diharapkan dapat menghitung 

• Analisa kondisi setiap stage untuk operasi denganperalatan seperti kolomdistilasi. Dua tahap perhitungan

ialah shortcut dan rigorous sebaiknya dilaksanakan.• Bank data untuk komponen-komponen murni. Semakin

banyak komponen tersedia maka akan semakin lengkap.

• Neraca untuk bermacam-macamunit operasi.• Input error message untk mencegah agar tidak terjadi

kesalahan yang berlanjut, karena menganalisanyamemerlukan waktu yang lama.

• Input manual yang jelas dan sistematis.

• Process non steady state yang populer dan seringdijumpai di dalampraktek misal depressurization,

distilasi batch dll.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 8/212

Proses Simulator Membutuhkan• Komponen dan Sifat-Sifat Komponen

– Memilih list komponenuntuk menentukan aliran umpan (feed)

• Metode Prediksi dan Parameter 

– Memilih metode termodinamika yang tepat

– Parameter yang cocok dengan data yang tersedia (parameterdapatditambah menggunakan Hyprop atau ProTherm)

• Spesifikasi Masalah

– Perancangan atau Pengamatan

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 9/212

Proses Simulator Membutuhkan• Flowsheet Proses atau Deskripsi 

– Komposisi aliran umpan

– Seleksi model peralatan

• Kondisi Operasi atau Desain

Spesifikasi 

– Laju alir, tekanan dan temperatur

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 10/212

Proses Simulator digunakan• Menghitung proses steady-state (keadaan tunak) aliran massa

dan energi 

• Memodelkan fasilitas produksi permukaan dan pabrik gas– Pemisahan minyak mentah dan stabilisasi– Dehidrasi gas / sweetening– Kompresi / refrigerasi– Recovery gas liquid / fraksionasi, distilasi, dst.

• Desain atau memilih proses– Evaluasi konsep alternatif – Mengecek desain kontraktor– Sizing / estimasi harga peralatan

• Evaluasi proses operasi dan performa– Pemecahan masalah performa– Studi debottlenecking– Optimasi performa proses

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 11/212

Black Box vs. Modular • Black Box Simulator

– Simulator pre-definisi,dengan jumlahkonfigurasi dan aliranyang terbatas

– Memerlukan inputyang sedikit (pre-definisi proses)

– EDEHYD, CLAUSIM,GOSP, FAST-EST,OPC*MAP

• Modular Simulator

– Proses definisi user,operasi yang bertahapdan berhubungan,aliran, and utilitas

– Memerlukan lebihbanyak input (prosesdefinisi)

– HYSYS, ASPEN-Plus,PRO-II,TSWEET

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 12/212

Modular Proses Simulator 

Separator Valve Kolom

• Proses simulator memodelkan proses dengantahapan blok perhitungan dan aliran

Komponen, Metode Termo, Aliran, Unit Operasi, Kontrol Simulasi

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 13/212

Blok

penyimpanandata

Blok-Blok Perhitungan• Blok perhitungan memodelkan peralatan proses• Seluruh input data harus dispesifikasi oleh user

atau nilai yang dihitung dari blok sebelumnya• Masukan: Data aliran masuk dan parameter

peralatan (HYSYS menerima aliran keluaran sebagai input)

• Keluaran: Data aliran keluar dan hasil peralatan

Blok

Perhitungan Parameter keluaran

AliranKeluar

Parameter masukan

Aliranmasuk

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 14/212

Tahapan Perhitungan• Blok perhitungan dalamsimulasi diselesaikan

dengan tahapan– Blok dengan aliran masuk yang diketahui

diselesaikan terlebih dahulu

– Blok dengan aliran inlet yang telah dihitung oleh bloksebelumnya diselesaikan berikutnya

Blokvalve

Blokseparator

Aliranmasuk

Aliranmasuk

Alirankeluar

AlirankeluarAlirankeluar

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 15/212

Loop iterasi • Aliran recycle dan parameter input yang tidak

diketahui diselesaikan dengan iterasi

Aliranmasuk Alirankeluar

AliranRecycle

Parameter masukan Parameter keluar

Spesifikasi parameter terhitung

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 16/212

Contoh Simulator Modular • ASPEN PLUS - Aspen Technology

– Moderat interaktif, basis windows

– Digunakan untuk model yang kompleks besar dankhusus

– Cocok untuk sistemelektrolit campuran (amina)– Termodinamika tersedia– Tersedia simulator dinamik

• ProVision / Pro-II - Simulation Sciences

– Moderat interaktif, basis windows, mudah digunakan– Tersedia thermodynamics package EDL-III– Tidak ada simulator dinamik

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 17/212

Contoh Modular Simulator 

• TSWEET/Prosim- BRE– Basis MS-DOS dan digunakan untuk memodelkan

plant amina atau sulfur.– Dapat digunakan sebagai alternatif dari HYSYS untuk

memodelkan plant TEG.– Tidak ada dinamik simulator

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 18/212

Contoh Modular Simulator 

• HYSYS - Hyprotech– Sangat interaktif, basis windows, mudah digunakan– Digunakan dalambanyak proses hulu dan oleh

kebanyakan kontraktor– Tersedia thermodynamics package EDL-III– Kemampuan memodelkan dinamik yang sangatbaik

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 19/212

Permodelan HYSYS dan Aplikasi 

Model steadyModel steady--statestate

ModelModel dinamikdinamik

Input modelInput model awalawal::

•• Termodinamika Termodinamika••KomponenKomponen

••UnitUnit OperasiOperasi

••KonstruksiKonstruksi flowsheetflowsheet

InputInput tambahantambahan::

••SizingSizing peralatanperalatan

••StrategiStrategi KontrolKontrol

•• Tekanan Tekanan--aliranaliran

••DesainDesain engineeringengineeringawalawal

••DesainDesain DetailedDetailed EngrEngr••OptimisasiOptimisasi realreal--timetime

••MonitoringMonitoringperformaperforma

••SolusiSolusi AutomationAutomation UmumUmum

APLIKASIAPLIKASI

••DesainDesain engineeringengineeringawalawal

••StudiStudi Topsides Topsides--SubseaSubsea EngrEngr••DesainDesain DetailedDetailed EngrEngr

••DCSDCS kontrolkontrol CekCek--outout

••StudiStudi ProsesProsesEngineeringEngineering

••StudiStudi KontrolKontrol && OperabilitasOperabilitas

•• Training Operator Training Operator••StudiStudi KontrolKontrol MultivariabelMultivariabel

AplikasiAplikasi

Pendekatan metodetunggal: Mempengaruhi permodelananda, investasi,memaksimalkan keuntungan anda.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 20/212

Hysys Overview -

Concept of Environments

Mulai Hysys

SimulationBasis

Environment

Lingkungan OilKarakterisasi

LingkunganFlowsheet

Utama

LingkunganFlowsheet

Utama

LingkunganKolom

LingkunganSub-Flowsheet

LingkunganSub-Flowsheet

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 21/212

Langkah2 ke Simulasi Modular 

• Memilih komponen & model termodinamika

• Mendefinisikan konfigurasi proses– Definisikan aliran umpan (feed)– Memilih model unit operasi

• Menentukan konektivitas aliran/unit operasi

• Menyediakan parameter operasi

• J alankan Simulasi (jika diperlukan)

• Cek hasilnya

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 22/212

Memeriksa spesikasi & hasil 

• Menguji bahwa model simulasi sesuai dengan

desain praktis sebenarnya• Menguji hasilnya

– Melihaterror messages dan nilai2 anomali

– Mengecek bahwa semua spesifikasi telah dipenuhi– Mengecek hasil vs. simulasi sebelumnya, data yangtersedia, common sense, pengalaman atau metodependekatan

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 23/212

Strategi Membuat Simulasi Dengan HYSYS

• Definisikan list komponen dan parameter model melaluibasis manager

• Definisikan aliran umpan pada interface workbook• Menggunakan interface PFD untuk membuatunit

operasi dan koneksi aliran2 yang berhubungan pada

saat yang bersamaan– Membuatunit operasi pertama dari PFD menggunakan objectpalette

– Double-click pada unit operasi dan definisikan koneksinya– Menyediakan semua data yang tersedia data yang tersedia

untuk menspesifikasi unit operasi-nya.– J angan over-spesifikasi property dengan mendefinisikannya

pada aliran dan unit operasi– Cek hasilnya pada workbook

– Lanjutkan ke unit operasi yang berikutnya

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 24/212

Problem2 yang biasa ditemui dan bisa

diselesaikan dengan HYSYS• Sifat Fisik & Kimia suatu fluida

• Berapa Boiling Point dan Dew Point suatu campuran

gas?• Bagaimana Phase suatu campuran gas?

• Bagaimana Komposisi product hasil suatu pemisahan?

• Berapa Pressure yang diperlukan fluida utk mencapaisuatu tempattertentu?

• Berapa kalor yang harus diambil / diberikan untukmendinginkan / memanaskan suatu fluida?

• Berapa Vapor Pressure suatu fluida yang akandutransfer ke Gathering Station?

• Dan lain-lain ……………….

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 25/212

Problem 1 :

Phase

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 26/212

Problem 1 : Deskripsi 

• Suatu campuran sebanyak 100lbmole/hr dengan komposisi (% mole)propane 61%, n-butane 28% dan n-pentane 11% . Tentukan phase

campuran tsb pada 150 F dan 200psia? Apakah satu phase (liquid sajaatau vapor saja) atau dua phase?

• Gunakan Peng-Robinson untukProperty Packagenya.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 27/212

Problem 1 : Langkah2 Detail 

• Cara manual :

F = V + L ……………(1)

Zi.F = V.yi + L.xi ……………(2)

yi = Ki . xi ……………(3)

Ki = f(T,P) …………....(4)

xi = F.zi / [F + V(Ki – 1)] …………..(5)

yi = F.zi / [F + L(1/Ki – 1)] ………….(6)Dengan mencoba-coba nilai L/F atau V/F hingga

didapatkan Σxi = 1 atau Σyi = 1.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 28/212

Problem 1 : Langkah2 Detail 

Dengan menggunakan spreadsheet Excel diperoleh :

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 29/212

Problem 1 : Langkah2 Detail 

Dengan HYSYS

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 30/212

Dari menu : Pilih File, New , Case.

Problem 1 : Langkah2 Detail 

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 31/212

Dari tab Components tambah Component List 

dengan tekan Add .

Problem 1 : Langkah2 Detail 

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 32/212

 Akan muncul Component List View .Tambahkan

komponen yang diinginkan dengan tekan Add Pure.

Problem 1 : Langkah2 Detail 

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 33/212

Problem 1 : Langkah2 Detail 

Dari tab Fluid Pkgs tambahkan Fluid Package

yang akan digunakan dengan tekan Add .

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 34/212

Problem 1 : Langkah2 Detail 

Pilih salah satu Property Package yang diinginkan.

Setelah dipilih tutup sheet Fluid Package : Basis-1

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 35/212

Problem 1 : Langkah2 Detail 

 Akan tampak tampilan seperti dibawah ini.

Tekan Enter Simulation Environment .

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 36/212

Problem 1 : Langkah2 Detail 

 Akan tampak tampilan seperti dibawah ini.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 37/212

Problem 1 : Langkah2 Detail 

Dari menu : Pilih File, Save As. Tekan Save As.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 38/212

Tekan Save.

Problem 1 : Langkah2 Detail 

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 39/212

Problem 1 : Langkah2 Detail 

 Akan muncul tampilan seperti dibawah ini.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 40/212

Problem 1 : Langkah2 Detail 

Dari Menu, pilih Tools, Preferences. Pilih

Variabels.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 41/212

Problem 1 : Langkah2 Detail 

Pilih Unit Set di  Available Unit Sets dan

maintain unit untuk setiap besaran pada

Display Unit .

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 42/212

Dari menu, Pilih Flowsheet , Palette atau tekan F4 atautekan object Palette untuk mengeluarkan Object Palette

Problem 1 : Langkah2 Detail 

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 43/212

Problem 1 : Langkah2 Detail 

Click Material Stream menu pada Object 

Palette.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 44/212

Problem 1 : Langkah2 Detail 

Double-click pada Material Stream. Dari tab

Worksheet , Pilih Composition, masukan

nilai mole fraksinya di Mol Fractions.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 45/212

Problem 1 : Langkah2 Detail  Dari tab Worksheet , Pilih Conditions, Ketik “Feed” 

 pada baris Stream Name, masukkan nilai “150 F“ pada

baris Temperature, 2 00 psia pada baris Pressure, dan

masukkan nilai “100 lbmole/hr” pada baris Molar Flow .

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 46/212

Problem 1 : Langkah2 Detail 

Pada baris Vapor/Phase Fraction secaraotomatis akan muncul nilai.

Jika nilainya = 0 berarti satu phase, liquid  jenuh. Jika nilainya = 1 berarti satu phase, uap

 jenuh.  Jika 0 < nilainya < 1 berarti dua phase,campuran liquid dan vapor.Untuk membuktikan bahwa dua phase

hubungkan stream tsb dengan Separator. Akan tampak flow rate dari vapor danliquidnya.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 47/212

Problem 1 : Langkah2 Detail 

Click Separator  pada Object Palette. Double-

click pada Separator tsb.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 48/212

Problem 1 : Langkah2 Detail 

Double-click pada Separator tsb. Dari tab Design, ketik 

“Separator ” pada baris Name, Pilih Connections,

masukan stream “Feed” pada inlet, stream “ Vapor” pada

Vapour Outlet dan stream “Liquid” pada Liquid Outlet.

P bl 1 L k h2 D t il

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 49/212

Problem 1 : Langkah2 Detail 

 Akan muncul :

P bl 1 L k h2 D t il

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 50/212

Problem 1 : Langkah2 Detail 

Untuk memunculkan Table dari sebuah stream,

click kanan pada stream tsb, akan tampak 

seperti dibawah ini. Kemudian pilih Show Table.

P bl 1 L k h2 D t il

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 51/212

Problem 1 : Langkah2 Detail 

Heat & material balance-nya :

P bl 1 C t

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 52/212

Problem 1 : Comment 

Dari spreadsheet Excel : L = 53 lbmole/hr 

Dari HYSYS : L = 56.14 lbmole/hr 

Perbedaan hasil yang diperoleh dari 

kedua cara tidak terlalu besar.

Perbedaan tsb kemungkinan disebabkan

oleh perbedaan dalam pengambilan

asumsi untuk menghitung properties(untuk menentukan nilai Ki).

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 53/212

Problem 2 :

Buble Point 

Problem 2 : Deskripsi

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 54/212

Problem 2 : Deskripsi 

• Suatu campuran sebanyak 100lbmole/hr dengan komposisi (% mole)

propane 61%, n-butane 28% dan n-pentane 11%. Tentukan boiling point 

campuran tsb pada 200 psia.• Gunakan Peng-Robinson untuk

Property Packagenya.

Problem 2 : Langkah2 Detail

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 55/212

• Cara manual :

F = L ……………(1)

zi.F = L.xi ……………(2)

zi = xi …………....(2)

Ki = f(T,P) …………....(3)

yi = Ki xi ..………….(4)

yi = Ki zi ..………….(4)

Dengan mencoba-coba temperature (T) hinggadidapatkan Σyi = 1. Temperature inilah yangdisebut Buble Point.

Problem 2 : Langkah2 Detail 

Problem 2 : Langkah2 Detail

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 56/212

Problem 2 : Langkah2 Detail 

Dengan menggunakan spreadsheet Excel diperoleh :

Problem 2 : Langkah2 Detail

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 57/212

Problem 2 : Langkah2 Detail 

Dengan HYSYS

Problem 2 : Langkah2 Detail

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 58/212

Dari menu : Pilih File, New , Case.

Problem 2 : Langkah2 Detail 

Problem 2 : Langkah2 Detail

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 59/212

Problem 2 : Langkah2 Detail 

Dari tab Components tambah Component List 

dengan tekan Add .

Problem 2 : Langkah2 Detail

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 60/212

Problem 2 : Langkah2 Detail  Akan muncul Component List View .Tambahkan

komponen yang diinginkan dengan tekan Add Pure.

Problem 2 : Langkah2 Detail

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 61/212

Problem 2 : Langkah2 Detail 

Dari tab Fluid Pkgs tambahkan Fluid Package

yang akan digunakan dengan tekan Add .

Problem 2 : Langkah2 Detail

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 62/212

Problem 2 : Langkah2 Detail 

Pilih salah satu Property Package yang diinginkan.

Setelah dipilih tutup sheet Fluid Package : Basis-1

Problem 2 : Langkah2 Detail

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 63/212

Problem 2 : Langkah2 Detail 

 Akan tampak tampilan seperti dibawah ini.

Tekan Enter Simulation Environment .

Problem 2 : Langkah2 Detail

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 64/212

Problem 2 : Langkah2 Detail 

 Akan tampak tampilan seperti dibawah ini.

Problem 2 : Langkah2 Detail

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 65/212

Problem 2 : Langkah2 Detail 

Dari menu : Pilih File, Save As. Tekan Save As.

Problem 2 : Langkah2 Detail

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 66/212

Problem 2 : Langkah2 Detail 

Tekan Save.

Problem 2 : Langkah2 Detail

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 67/212

Problem 2 : Langkah2 Detail 

 Akan muncul tampilan seperti dibawah ini.

Problem 2 : Langkah2 Detail

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 68/212

Problem 2 : Langkah2 Detail 

Dari Menu, pilih Tools, Preferences. PilihVariabels.

Problem 2 : Langkah2 Detail 

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 69/212

Pilih Unit Set di  Available Unit Sets dan

maintain unit untuk setiap besaran pada

Display Unit .

g

Problem 2 : Langkah2 Detail 

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 70/212

Dari menu, Pilih Flowsheet , Palette atau tekan F4 atautekan object Palette untuk mengeluarkan Object Palette

g

Problem 2 : Langkah2 Detail 

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 71/212

Click Material Stream menu pada Object 

Palette.

g

Problem 2 : Langkah2 Detail 

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 72/212

g

Double-click pada Material Stream. Dari tab

Worksheet , Pilih Composition, masukan

nilai mole fraksinya di Mol Fractions.

Problem 2 : Langkah2 Detail 

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 73/212

g Dari tab Worksheet , Pilih Conditions, Ketik “Buble

Point” pada baris Stream Name, masukkan nilai “0“  pada baris Vapor/Phase Fraction, 2 00 psia pada barisPressure, dan masukkan nilai “100 lbmole/hr” pada

baris Molar Flow .

Problem 2 : Langkah2 Detail 

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 74/212

g

Problem 2 : Langkah2 Detail 

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 75/212

Click Separator  pada Object Palette. Double-

click pada Separator tsb.

Problem 2 : Langkah2 Detail 

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 76/212

Double-click pada Separator tsb. Dari tab Design, ketik 

“Separator ” pada baris Name, Pilih Connections,

masukan stream “Buble Point” pada inlet, stream “ 

Vapor” pada Vapour Outlet dan stream “Liquid” padaLiquid Outlet.

Problem 2 : Langkah2 Detail 

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 77/212

 Akan muncul :

Problem 2 : Langkah2 Detail 

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 78/212

Untuk memunculkan Table dari sebuah stream,

click kanan pada stream tsb, akan tampak 

seperti dibawah ini. Kemudian pilih Show Table.

Problem 2 : Langkah2 Detail 

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 79/212

Heat & material balance-nya :

Problem 2 : Comment 

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 80/212

• Dari spreadsheet Excel : T = 135 F 

• Dari HYSYS : T = 137.8 F 

• Perbedaan hasil yang diperoleh dari 

kedua cara tidak terlalu besar.

• Perbedaan ini kemungkinan

disebabkan oleh harga Ki yang berbeda

dari kedua cara tsb diatas. Hal ini 

kembali lagi ke pemilihan asumsi untuk 

menghitung properties.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 81/212

Problem 3 :

Dew Point 

Problem 3 : Deskripsi 

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 82/212

• Suatu campuran sebanyak 100lbmole/hr dengan komposisi (% mole)

propane 61%, n-butane 28% dan n-pentane 11%. Tentukan Dew Point 

campuran tsb pada 200 psia.• Gunakan Peng-Robinson untuk

Property Packagenya.

Problem 3 : Langkah2 Detail 

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 83/212

• Cara manual :

F = V ……………(1)

zi.F = V.yi ……………(2)zi = yi …………....(2)

Ki = f(T,P) …………....(3)

xi = yi / Ki ..………….(4)

xi = zi / Ki ..………….(4)

Dengan mencoba-coba temperature (T) hinggadidapatkan Σxi = 1. Temperature inilah yangdisebut Dew Point.

Problem 3 : Langkah2 Detail 

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 84/212

Dengan menggunakan spreadsheet Excel diperoleh :

Problem 3 : Langkah2 Detail 

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 85/212

Dengan HYSYS

Problem 3 : Langkah2 Detail 

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 86/212

Dari menu : Pilih File, New , Case.

Problem 3 : Langkah2 Detail 

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 87/212

Dari tab Components tambah Component List 

dengan tekan Add .

Problem 3 : Langkah2 Detail 

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 88/212

 Akan muncul Component List View .Tambahkan

komponen yang diinginkan dengan tekan Add Pure.

Problem 3 : Langkah2 Detail 

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 89/212

Dari tab Fluid Pkgs tambahkan Fluid Package

yang akan digunakan dengan tekan Add .

Problem 3 : Langkah2 Detail 

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 90/212

Pilih salah satu Property Package yang diinginkan.

Setelah dipilih tutup sheet Fluid Package : Basis-1

Problem 3 : Langkah2 Detail 

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 91/212

 Akan muncul tampilan seperti dibawah ini.

Tekan Enter Simulation Environment .

Problem 3 : Langkah2 Detail 

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 92/212

 Akan muncul tampilan seperti dibawah ini.

Problem 3 : Langkah2 Detail 

D i Pilih Fil S A T k S A

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 93/212

Dari menu : Pilih File, Save As. Tekan Save As.

Problem 3 : Langkah2 Detail 

Tekan Save

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 94/212

Tekan Save.

Problem 3 : Langkah2 Detail 

Akan muncul tampilan seperti dibawah ini

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 95/212

 Akan muncul tampilan seperti dibawah ini.

Problem 3 : Langkah2 Detail 

Dari Menu pilih Tools Preferences Pilih

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 96/212

Dari Menu, pilih Tools, Preferences. Pilih

Variabels.

Problem 3 : Langkah2 Detail 

Pilih Unit Set di Available Unit Sets dan

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 97/212

Pilih Unit Set di  Available Unit Sets dan

maintain unit untuk setiap besaran pada

Display Unit .

Problem 3 : Langkah2 Detail 

Dari menu Pilih Flowsheet Palette atau tekan F4 atau

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 98/212

Dari menu, Pilih Flowsheet , Palette atau tekan F4 atautekan object Palette untuk mengeluarkan Object Palette

Problem 3 : Langkah2 Detail 

Click Material Stream menu pada Object

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 99/212

Click Material Stream menu pada Object 

Palette.

Problem 3 : Langkah2 Detail 

Double-click pada Material Stream Dari tab

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 100/212

Double click pada Material Stream. Dari tab

Worksheet , Pilih Composition, masukan

nilai mole fraksinya di Mol Fractions.

Problem 3 : Langkah2 Detail  Dari tab Worksheet , Pilih Conditions, Ketik “Dew Point” 

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 101/212

, ,

 pada baris Stream Name, masukkan nilai “150 F“ pada

baris Temperature, 2 00 psia pada baris Pressure, dan

masukkan nilai “100 lbmole/hr” pada baris Molar Flow .

Problem 3 : Langkah2 Detail 

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 102/212

Click Separator pada Object Palette. Double-

Problem 3 : Langkah2 Detail 

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 103/212

Click Separator  pada Object Palette. Double

click pada Separator tsb.

Problem 3 : Langkah2 Detail 

Double-click pada Separator tsb. Dari tab Design, ketik

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 104/212

Double click pada Separator tsb. Dari tab Design, ketik 

“ Separator” pada baris Name, Pilih Connections,

masukan stream “Dew Point” pada inlet, stream “ Vapor” 

 pada Vapour Outlet dan stream “Liquid” pada Liquid Outlet.

Problem 3 : Langkah2 Detail 

 Akan muncul :

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 105/212

Problem 3 : Langkah2 Detail 

Untuk memunculkan Table dari sebuah stream,

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 106/212

click kanan pada stream tsb, akan tampak 

seperti dibawah ini. Kemudian pilih Show Table.

Problem 3 : Langkah2 Detail 

Heat & material balance-nya :

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 107/212

Heat & material balance nya :

Problem 3 : Comment 

• Dari spreadsheet Excel : T = 175 F

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 108/212

• Dari spreadsheet Excel : T = 175 F 

• Dari HYSYS : T = 174.4 F 

• Hasil yang diperoleh dari kedua caratsb adalah hampir sama.

• Perbedaan yang sangat kecil ini kemungkinan disebabkan oleh harga Ki yang hampir sama dari kedua cara tsb

diatas. Hal ini kembali lagi ke pemilihanasumsi untuk menghitung properties.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 109/212

Problem 4 :

Valve &Separator 

Sebuah liquid yang telah di-flash melalui

Problem 4 : Deskripsi 

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 110/212

q y gsebuah valve (katup) menuju tekanan 1atmdan dimasukkan ke separator.

Liquid tersebut memiliki komposisi sepertidi bawah ini dan menjadi jenuh padatekanan 100 psia.

Metana 50 lb-mol / hrEtana 70 lb-mol / hrPropana 60 lb-mol / hr

 Tentukan flow dan komposisi padamasing-masing stream yang belumdiketahui.

Problem 4 : Process Flow 

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 111/212

Problem 4 : Langkah2 detail 

Dari menu : Pilih File, New , Case.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 112/212

Problem 4 : Langkah2 detail 

Dari tab Components tambah Component List 

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 113/212

dengan tekan Add .

Problem 4 : Langkah2 detail 

 Akan muncul Component List View .Tambahkankomponen yang diinginkan dengan tekan Add Pure

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 114/212

komponen yang diinginkan dengan tekan Add Pure.

Problem 4 : Langkah2 detail 

Dari tab Fluid Pkgs tambahkan Fluid Packagek di k d t k Add

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 115/212

yang akan digunakan dengan tekan Add .

Problem 4 : Langkah2 detail 

Pilih salah satu Property Package yang diinginkan.

Setelah dipilih tutup sheet Fluid Package : Basis 1

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 116/212

Setelah dipilih tutup sheet Fluid Package : Basis-1

Problem 4 : Langkah2 detail 

 Akan muncul tampilan seperti dibawah ini.

T k E t Si l ti E i t

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 117/212

Tekan Enter Simulation Environment .

Problem 4 : Langkah2 detail 

 Akan muncul tampilan seperti dibawah ini.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 118/212

Problem 4 : Langkah2 detail 

Dari menu : Pilih File, Save As. Tekan Save As.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 119/212

Problem 4 : Langkah2 detail 

Tekan Save.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 120/212

Problem 4 : Langkah2 detail 

 Akan muncul tampilan seperti dibawah ini.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 121/212

Problem 4 : Langkah2 detail 

Dari Menu, pilih Tools, Preferences. PilihVariabels

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 122/212

Variabels.

Problem 4 : Langkah2 detail 

Pilih Unit Set di  Available Unit Sets danmaintain unit untuk setiap besaran pada

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 123/212

maintain unit untuk setiap besaran pada

Display Unit .

Problem 4 : Langkah2 detail 

Dari menu, Pilih Flowsheet , Palette atau tekan F4 atautekan object Palette untuk mengeluarkan Object Palette

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 124/212

Palette

Click Material Stream menu pada Object Palette.

Problem 4 : Langkah2 detail 

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 125/212

Double-click pada Material Stream. Dari tabWorksheet , Pilih Composition. Tekan Basis

Problem 4 : Langkah2 detail 

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 126/212

, p

dan pilih Mole Flows.

Masukan nilai mole flow masing-masing component

Problem 4 : Langkah2 detail 

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 127/212

component.

Problem 4 : Langkah2 detail 

Dari tab Worksheet , Pilih Conditions, Ketik “Feed”  pada baris Stream Name, masukkan nilai “0“ pada barisVapour / Phase Fraction dan 100 psia pada baris

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 128/212

Vapour / Phase Fraction dan 100 psia pada barisPressure.

Problem 4 : Langkah2 detail 

Click Valve pada Object Palette.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 129/212

Problem 4 : Langkah2 detail 

Double-click pada Valve tsb. Dari tab Design, ketik “ Valve” pada baris Name, Pilih Connections, masukan

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 130/212

stream “Feed” pada Inlet , stream “ Valve Outlet” pada

Outlet .

Problem 4 : Langkah2 detail 

Dari tab Design, Pilih Worksheet, masukan nilai “1 atm”  pada kolom Valve Outlet dan baris Pressure.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 131/212

Problem 4 : Langkah2 detail 

Dari tab Design, Pilih Parameters, Delta P (pressuredrop) akan terhitung.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 132/212

Problem 4 : Langkah2 detail 

 Akan muncul :

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 133/212

Problem 4 : Langkah2 detail 

Click Separator  pada Object Palette.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 134/212

Problem 4 : Langkah2 detail 

Double-click pada Separator tsb. Dari tab Design, ketik “ Separator” pada baris Name, Pilih Connections,

masukan stream “Valve Outlet” pada inlet stream “

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 135/212

masukan stream Valve Outlet pada inlet, stream  

Vapor” pada Vapour Outlet dan stream “Liquid” pada

Liquid Outlet.

Problem 4 : Langkah2 detail 

 Akan muncul :

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 136/212

Problem 4 : Langkah2 Detail 

Untuk memunculkan Table dari sebuah stream,click kanan pada stream tsb, akan tampak 

seperti diba ah ini Kem dian pilih Sho Table

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 137/212

seperti dibawah ini. Kemudian pilih Show Table.

Problem 4 : Langkah2 detail 

• Heat & material balance-nya :

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 138/212

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 139/212

Problem 5 :Reaksi 

Pembakaran CH4

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 140/212

Problem 5 : Langkah2 detail 

Dari menu : Pilih File, New , Case.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 141/212

Problem 5 : Langkah2 detail 

Dari tab Components tambah Component List dengan tekan Add .

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 142/212

Problem 5 : Langkah2 detail 

 Akan muncul Component List View .Tambahkankomponen yang diinginkan dengan tekan Add Pure.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 143/212

Problem 5 : Langkah2 detail 

Dari tab Fluid Pkgs tambahkan Fluid Packageyang akan digunakan dengan tekan Add .

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 144/212

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 145/212

Problem 5 : Langkah2 detail 

 Akan muncul tampilan seperti dibawah ini.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 146/212

Problem 5 : Langkah2 detail 

Pilih tab Reaction untuk menambahkan reaksi yang akan digunakan, hasil seperti di bawah ini.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 147/212

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 148/212

Problem 5 : Langkah2 detail 

Pilih Conversion pada kolom Reaction, dantekan Add Reaction, hasilnya seperti di bawah

ini.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 149/212

ini.

Problem 5 : Langkah2 detail 

Input component yang diperlukan serta koefisienstokhiometrinya.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 150/212

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 151/212

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 152/212

Problem 5 : Langkah2 detail 

Pilih tab Basis. Input basis componen, phase dankonversi reaksi. Hasilnya menunjukan reaksi sudah

Ready untuk digunakan.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 153/212

Problem 5 : Langkah2 detail 

Tutup sheet Reactions & Conversion Reaction : Rxn-1Hasilnya seperti dibawah ini.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 154/212

Problem 5 : Langkah2 detail 

Delete Global Set dengan tekan tab Delete Set .Hasilnya seperti dibawah ini.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 155/212

Problem 5 : Langkah2 detail 

Tambahkan Reaction Set dengan tekan tab Add Set  pada kolom Reaction Sets. Hasilnya seperti dibawah

ini.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 156/212

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 157/212

Problem 5 : Langkah2 detail 

Tutup sheet Reaction Set : Set-1 pada kolom ActiveList . Hasilnya seperti dibawah ini.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 158/212

Problem 5 : Langkah2 detail 

Highlight Set-1 seperti dibawah ini.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 159/212

Problem 5 : Langkah2 detail 

Tekan tab Add to FP. Ini bertujuan agar Set-1 yang berisi reaksi Rxn-1 akan masuk dalam Fluid Package yang digunakan (dalam

soal ini kita memakai Peng-Robinson). Hasilnya seperti dibawah ini.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 160/212

Problem 5 : Langkah2 detail 

Tekan tab Add Set to Fluid Package. Hasilnya seperti dibawah ini.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 161/212

Problem 5 : Langkah2 detail 

Tekan Enter Simulation Environment . Akan muncul tampilan seperti dibawah ini.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 162/212

Problem 5 : Langkah2 detail 

Dari menu : Pilih File, Save As. Tekan Save As.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 163/212

Problem 5 : Langkah2 detail 

Tekan Save.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 164/212

Problem 5 : Langkah2 detail 

 Akan muncul tampilan seperti dibawah ini.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 165/212

Problem 5 : Langkah2 detail 

• Dari Menu, pilih Tools, Preferences. PilihVariabels.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 166/212

Problem 5 : Langkah2 detail 

• Pilih Unit Set di  Available Unit Sets danmaintain unit untuk setiap besaran pada

Display Unit . Pilih EuroSI.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 167/212

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 168/212

Problem 5 : Langkah2 detail 

• Ganti namannya dengan SI UNIT. Ubah satuan pressure dengan barg. Hasilnya seperti di bawah ini.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 169/212

Problem 5 : Langkah2 detail 

Dari menu, Pilih Flowsheet , Palette atau tekan F4 atau tekanobject Palette untuk mengeluarkan Object Palette

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 170/212

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 171/212

Problem 5 : Langkah2 detail 

Double-click pada Material Stream. Dari tabWorksheet , Pilih Composition.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 172/212

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 173/212

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 174/212

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 175/212

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 176/212

Problem 5 : Langkah2 detail 

Double-click pada Material Stream. Dari tabWorksheet , Pilih Composition. Tekan EDIT 

dan input composisi masing-masing component.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 177/212

Problem 5 : Langkah2 detail 

Tekan OK, hasilnya seperti di bawah ini.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 178/212

Problem 5 : Langkah2 detail 

Dari tab Worksheet , Pilih Conditions, Ketik “O2” padabaris Stream Name, masukkan nilai “25 C“ pada barisTemperature, 0 barg pada baris Pressure, danmasukkan nilai “0.02 kgmole/hr” pada baris Molar Flow .

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 179/212

Problem 5 : Langkah2 detail 

Tutup form O2 tsb, maka akan tampak seperti dibawahini.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 180/212

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 181/212

Problem 5 : Langkah2 detail 

Double-click pada Conversion Reactor tsb. Dari tab Design, ketik “ Reaktor ” pada baris Name, Pilih Connections, masukan stream “ CH4” dan

“ O2 ” pada inlet, stream “ Gas” pada Vapour Outlet dan stream “Liquid” pada

Liquid Outlet. Hasilnya seperti dibawah ini.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 182/212

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 183/212

Problem 5 : Langkah2 detail 

Tutup form Reaktor tsb, maka akan tampak seperti dibawah ini.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 184/212

Problem 5 : Langkah2 detail 

Untuk memunculkan

Table dari sebuah

stream click

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 185/212

stream, click kanan pada

stream tsb, akan

tampak seperti dibawah ini.

Kemudian pilih

Show Table.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 186/212

Problem 5 : Langkah2 detail 

Tampilkan molar flow masing-masing component dengan double click pada masing-masing table. Hasilnyaseperti dibawah ini.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 187/212

Problem 5 : Langkah2 detail 

Tambahkanvariableyang diinginkan

dengan

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 188/212

gtekan tab Add 

Variable.Hasilnyaseperti disamping 

ini.

Problem 5 : Langkah2 detail 

Tekan tab OK , maka hasilnya seperti dibawahini.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 189/212

Problem 5 : Langkah2 detail 

Lakukanhal yang samauntuk component lainnya.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 190/212

Hasil lengkapny a seperti dibawahini.

Problem 5 : Langkah2 detail 

Lakukan hal sama untuk stream yang lain. Hasilnyaseperti dibawah ini.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 191/212

Problem 5 : Langkah2 detail 

Temperature dibuat konstant,25 deg C. Berapa kalor per 

waktu yang harus diambil?

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 192/212

waktu yang harus diambil?

Berapa temperature akhir 1000 kg/hr air pendingin yang suhu awalnya 25 deg C?

Continue to next page.

Problem 5 : Langkah2 detail  Temperature dibuat konstant 25 deg C, artinya ada kalor/waktu

yang harus diambil dari reaktor. Berarti kita membutuhkan streamenergi. Double click pada Reaktor, dari tab Design, Pilih Connections,masukan stream “Q_Reaktor” pada kolom Energy (Optional). Hasilnyaseperti dibawah ini.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 193/212

Problem 5 : Langkah2 detail 

Tutupform

Reaktor 

tsb,maka

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 194/212

a a

akan

tampak 

seperti 

dibawa

h ini.

Problem 5 : Langkah2 detail  Double-click pada Stream Gas. Dari tab Worksheet, Pilih Conditions,

masukan stream “25 deg C” pada baris temperature. Hasilnya seperti 

dibawah ini.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 195/212

Problem 5 : Langkah2 detail 

Hasilnya akhirnya seperti dibawah ini.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 196/212

Problem 5 : Langkah2 detail 

Tampilkantable pada

stream

Q_Reaktor.Hasilnya

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 197/212

y

seperti di 

samping.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 198/212

Problem 5 : Langkah2 detail 

Double-click pada Material Stream. Dari tabWorksheet , Pilih Composition.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 199/212

Problem 5 : Langkah2 detail 

Tekan Edit dan input nilai mole fraksi masing-masing component. Assumsi water-nya murni.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 200/212

Problem 5 : Langkah2 detail 

Tekan tabOK.

Hasilnya

seperti 

disamping.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 201/212

Dari tab

Worksheet,

Pilih

Conditions,

ketik “Water” 

 pada barisstream name,

i t “25 d C”

Problem 5 : Langkah2 detail 

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 202/212

input “25 deg C” 

 pada baris

temperature, “0 

barg” pada baris

 pressure, “10 

kg/hr” pada baris

mass flow.

Hasilnya seperti di samping.

Problem 5 : Langkah2 detail 

Click Energy Stream pada Object Palette.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 203/212

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 204/212

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 205/212

Problem 5 : Langkah2 detail 

Double-click pada Heater tsb. Dari tab Design, ketik “Heater 

Exchanger ” pada baris Name, Pilih Connections, masukan stream

“Water” pada kolom Inlet , stream “ Q-100” pada kolom Energy ,

stream “Water Out” pada kolom Outlet .

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 206/212

Problem 5 : Langkah2 detail  Dari tab Design, Pilih Parameters, masukan “0 bar” pada kolom Delta P .

 Atau pilih tab Worksheet , pilih Conditions, masukan “0 barg” pada barisPressure dan kolom Stab Feed (Pilih salah satu, tidak boleh keduanya).

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 207/212

Problem 5 : Langkah2 detail 

Tutupform

Heater 

tsb,

maka

akan

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 208/212

akan

tampak 

seperti 

di 

samping 

ini.

Problem 5 : Langkah2 detail 

Tampilkan table pada masing-masing stream.

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 209/212

Problem 5 : Langkah2 detail 

Kalor per waktu yang harusdiambil = 8883 KJ/hr. Mengapa

nilai ini tidak sama dengan Entalpi reaksi untuk 0.1 kgmole/hr CH4

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 210/212

gyang bereaksi, padahal reaksinyaisothermal?

Temperature akhir 1000 kg/hr air 

 pendingin = 99.96 deg C.

Review konsep utama

• Menentukan perangkat / tool yang tepatuntukmemecahkan masalah– Perhitungan manual (dengan tangan)– Proses Simulator (HYSYS)

• Menggunakan Proses Simulator– Memilih komponen & model Termodinamik

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 211/212

p– Menentukan konfigurasi proses

• Menentukan aliran umpan• Memilih model unit operasi

– Menentukan konektivitas aliran/unit operasi

– Menyediakan parameter operasi

– J alankan simulasi (jika perlu)– Cek hasil

7/29/2019 Module 1 Hysys

http://slidepdf.com/reader/full/module-1-hysys 212/212