Kugelhähne Ball valves - RegomRp 4----13,5 16,5 17,5 20,5 20,5 24,5 25,5 30 31,5 39----27 27 33 41...
Transcript of Kugelhähne Ball valves - RegomRp 4----13,5 16,5 17,5 20,5 20,5 24,5 25,5 30 31,5 39----27 27 33 41...
-
KugelhähneBall valves
Nr. 1000 - 1030
R55 ...bis DN 150: 1.0460ab DN 200: 1.0619bis DN 100: 1.0460ab DN 150: 1.0619
bis DN 150: 1.0460ab DN 200: 1.0619bis DN 100: 1.0460ab DN 150: 1.0619
1.0460
1.0460
R66 ...bis DN 50: 1.4404ab DN 65: 1.4408bis DN 40: 1.4404ab DN 50: 1.4408bis DN Rp 2: 1.4404ab DN Rp 2½: 1.4408bis DN Rp 1½: 1.4404ab DN Rp 2: 1.4408
DN 50: 1.4404ab DN 65: 1.4408
DN 40: 1.4404ab DN 50: 1.4408
Gehäuse in dreiteiliger Ausführung, Sandwich-Bauweise, ausschwenkbares Gehäusemittelteil, Dichtelemente aus PTFE,Betätigung durch HandhebelAnschlussarten:• mit Schweißenden nach DIN 3239 • mit Gewindeenden nach ISO 7/1 • mit Flanschanschluss nach DIN 2501Ausführung:Standardausführung mit reduziertem Durchgang, wahlweise mit vollem Durchgang (integral).
Body in three-piece design, sandwich construction, central body part, sealing elements made of PTFE, operation with hand lever.Connection:• With welding ends acc. to DIN 3239 • With threaded ends acc. to ISO 7/1 • With flanged connection acc. to DIN 2501Design:Standard design with reduced bore, optional with full bore (integral).
MF-Kugelhähne PN 16/40
MF-Ball valves PN 16/40
Bestell-Nr.Order No.
...TCBS
...TCBS
...TCBG
...TCBG
...TCBF
...TCBF
DN
8-250
8-200
Rp¼-4
Rp¼-3
10-250
10-200
AusführungDesign
AnschlussConnection
reduzierter DurchgangReduced borevoller DurchgangFull borereduzierter DurchgangReduced borevoller DurchgangFull borereduzierter DurchgangReduced borevoller DurchgangFull bore
SchweißendenWelding endsSchweißendenWelding endsGewindeanschlussThreaded connectionGewindeanschlussThreaded connectionFlanschanschlussFlanged connectionFlanschanschlussFlanged connection
Gehäusewerkstoff / Body material
RA55 ... RA66 ...
1.0619
1.0619
1.0619
1.0619
1.0619
1.0619
1.4408
1.4408
1.4408
1.4408
1.4408
1.4408
-
Ausführung mit Schweißenden (reduzierter Durchgang)Design with welding ends (reduced bore)
DN 10 - 50 DN 65 - 250
Ausführung mit GewindeanschlussDesign with threaded ends
DN Rp 3/8 - Rp 4
Detail: AntistatikDetail: antistatic
Ausführung mit Flanschanschluss (reduzierter Durchgang)Design with flanged connection (reduced bore)
DN 15 - 50 DN 65 - 250
KugelhähneBall valves
Nr. 1000 - 1030
R
-
DN
BaumaßeDimensions
KugelBall
GewindeausführungThreaded end design
ISO 7/1
SchweißendenausführungWelding end design
DIN 3239-Form 2 und/andDIN 2559 Form 22
DDIN 2501PN 16/40
L L4 L1 L2 H H1 D1 R L3 SW D3s
R55.s
R66.
reduzierter Durchgang / Reduced bore
voller Durchgang / Full bore
101520253240506580
100125150200250
6565
72,585,499,3
110,4126,3142,6169,5214277307409460
130130150160180200230290310350400480600730
20,420,424,531,441,348,456,371,488,9
108,5134,6134,6189,1248
140140140180180200200250480480480480720800
55555774778994
110161176190190262310
909092
110115135140155161176190190262310
11,111,114,220,625,431,7385062
82,4100100150200
Rp 3/8Rp 1/2Rp 3/4Rp 1
Rp 1 1/4Rp 1 1/2
Rp 2Rp 2 1/2
Rp 3Rp 4
----
13,516,517,520,520,524,525,530
31,539----
27273341505568ØØØ----
17,221,326,933,742,448,360,376,188,9
114,3139,7168,3219,1273
222
2,32,62,62,92,93,23,64
4,56,36,3
2222222
2,32,32,62,62,62,94
9095
105115140150165185200220250285340405
8101520253240506580
100150200
6565
72,585,499,3
110,4126,3142,6169,5214277409460
130130130150160180200230290310350480600
20,420,424,531,441,348,456,371,488,9
108,5134,6189,1248
140140140180180200200250480480480720800
55555774778994
110161176190262310
909092
110115135140155161176190262310
11,111,114,220,625,431,7385062
82,4100150200
Rp 1/4Rp 3/8Rp 1/2Rp 3/4Rp 1
Rp 1 1/4Rp 1 1/2
Rp 2Rp 2 1/2
Rp 3---
13,513,516,517,520,520,524,52630
31,5---
27273341505568ØØØ---
13,517,221,326,933,742,448,360,376,188,9
114,3168,3219,1
2222
2,32,62,62,92,93,23,64,56,3
22222222
2,32,32,62,62,9
909095
105115140150165185200220285340
Pos.Item
Benennung Designation
1
2
3
456789
101112131415
16
17
181920212223
Gehäuse
Kugel
Schaltwelle
GehäusedichtungDichtschaleSchaltwellendichtungStopfbuchsdichtungAnpressringTellerfederFeststellscheibeGehäuseschraubeGehäusemutterSchaltwellenmutterDistanzhülseStützring
Schweißende
Flansch
HandhebelFeststellscheibeAnschlagGewindeendeScheibeSk.-Schraube
Body
Ball
Stem
Body sealingSeatStem sealingStuffing box sealingContact ringSpringLock washerBody screwBody nutStem nutDistance tubeCentre ring
Welded end
Flange
Hand leverLock washerStop pinThreaded endDiscHex.-head screw
Werkstoff / MaterialR55 / RA55 R66 / RA66
P250GH (C22.8)GP240GH (GS-C25)X2CrNiMo17-12-2GX5CrNiMo19-11-2X2CrNiMo17-12-2X2CrNiMoN22-5-3PTFEPTFE / PTFE-GFKPTFE + GFPTFE + GF / AntistatikX2CrNiMo17-12-2X9CrNi18-8X2CrNi19-118.8 / A2-708 / A2-709S20PTFEPTFE + GFP250GH (C22.8)GP240GH (GS-C25)
C15X2CrNi19-11EN-GLMB-350-10 (GTS35)P250GH (C22.8)X4CrNi18-10X4CrNi18-10
1.04601.06191.44041.44081.44041.4462
----
1.44041.43101.4306
--
1.0711--
1.04601.0619
1.04011.4306
EN-JM11301.04601.43011.4301
X2CrNiMo17-12-2GX5CrNiMo19-11-2X2CrNiMo17-12-2GX5CrNiMo19-11-2X2CrNiMo17-12-2X2CrNiMoN22-5-3PTFEPTFE / PTFE-GFKPTFE + GFPTFE + GF / AntistatikX2CrNiMo17-12-2X9CrNi18-8X2CrNi19-11A2-70A2-70X4CrNi18-10PTFEPTFE + GF
X2CrNiMo17-12-2GX5CrNiMo19-11-2C15X2CrNi19-11GX5CrNi19-10X2CrNiMo17-12-2X4CrNi18-10X4CrNi18-10
1.44041.44081.44041.44081.44041.4462
----
1.44041.43101.4306
--
1.4301--
1.44041.44081.04011.43061.43081.44041.43011.4301
Baumaße / Dimensions
Werkstoffe / Materials
KugelhähneBall valves
Nr. 1000 - 1030
X2CrNiMo17-12-2 1.4404
P250GH (C22.8) 1.0460
-
Bestellbeispiel für Kugelhähne in 3-Wege-FormExample to order ball valves in 3-way-form
Seitenanschluss links, Code siehe untenSide connection on the left, code refer to bottom
Seitenanschluss rechts, Code siehe untenSide connection on the right, code refer to bottom
mittlerer Anschluss, Code siehe untenMiddle connection, code refer to bottom
Lage des mittleren AnschlussesPosition of the middle connectionH = horizontal / V = vertikal
Kugelbohrung / Ball boreL = L-Form / T = T-Form
Werkstoff / Material5 = Stahl / Steel6 = Edelstahl / Stainless steel
Ausführung 3-Wege-FormDesign 3-way-form
mit Aufbauflansch nach DIN ISO 5211With mounting flange acc. to DIN ISO 5211
Gehäuseform 3-teilig, zur HandbetätigungBody in three-piece design, for manual operatin
Typ / Type R A 3 6 L H 4 1 1
Code für Anschlussarten / Code for connections1 = Schweißenden / Welding ends2 = Innengewinde nach ISO 7/1 / Inside thread acc. to ISO 7/1
3 = NPT-Gewinde / NPT-threaded ends4 = Flanschanschluss / Flanged connection
Ausführung in 3-Wege-Form mit Flanschanschluss(Abmessungen wie Durchgangsform)Design in 3-way-form with flanged connection(dimensions also straight through form)
Ausführung in 3-Wege-Form mit Schweißenden(Abmessungen wie Durchgangsform)Design in 3-way-form with welding ends(dimensions also straight through form)
reduzierter DurchgangReduced borevoller DurchgangFull boreAA1
DN
DN
10
8
15
10
20
15
25
20
32
25
40
32
50
40
65
50
80
65
100
80
125
-
150
100
200
150
250
200
5085
5090
6095
60100
75105
80115
90125
125145
145155
155175
175200
200225
240275
--
KugelhähneBall valves
Nr. 1000 - 1030
Illustrated in a 90° shifted position
Illustrated in a 90° shifted position
-
Schaltbeispiele zum Kugelhahn in 3-Wege-FormDiagram of connections for ball valves in 3-way-form
Schaltschema (Draufsicht) TH-BohrungDiagram of connection (top view) TH-bore
Schaltschema (Draufsicht) LH-BohrungDiagram of connection (top view) LH-bore
Bitte beachten Sie, dass der mittlere Anschlussder Kugel nicht separat abgedichtet ist. Dadurch kann bei der T-Bohrung das Medium die Kugel umströmen und am mittleren Abgang austreten (siehe Skizze).
Please note, that the middle connection of the ball does not tightened separately. Due to that the medium can overflow the ball when having a T-bore and penetrate the middle exit.
Druck- und Temperaturdiagramm für Venturi-HähnePressure and temperature diagram for Venturi-Valves
Druck- und Temperaturdiagramm für Integral-HähnePressure and temperature diagram for Integral-Valves
Bei Bestellung bitte gewünschte Schaltstellung angeben!In case of an order, please advise the indexing position!
KugelhähneBall valves
Nr. 1000 - 1030
Die Dreiwegekugelhähne sind für einen maximalen Differenzdruck von Δp = 6 bar ausgelegt.The ball valves in 3-way-form are designed for a maximum differential pressure by Δp = 6 bar.
Andere Druck-Temperaturbereiche sind durch die Wahl anderer Dichtungswerkstoffe möglich.Other pressure-temperature ranges possible if other sealing materials are choosen.
-
Kaltwasserdurchsätze und K -Werte für KugelhähneVSWerte für Venturi-Ausführung (reduzierter Durchgang)
Cold water flow and K -values for ball valvesVSValues for venturi design (reduced bore)
Druckdifferenz in mWSDifferential pressure in mWS
Dur
chflu
ssin
m³/
hFl
owin
m³/
h
K-W
erte
inm
³/h
VS
Kva
lues
inm
³/h
VS
Differenzdruck in barDifferential pressure in bar
KugelhähneBall valves
Nr. 1000 - 1030
-
Serie "RA" mit Aufbauflansch nach DIN ISO 5211(auch mit vollem Durchgang lieferbar)
Design "RA" with mounting flange acc. to DIN ISO 5211(also with full bore available)
reduzierterDurchgang
Reduced bore
vollerDurchgang
Full bore
RA . . . AusführungRA . . . Design
101520253240506580
100125150200250
8101520253240506580-
100150200
4040425358717686
153168182182258305
303032383642467099
114128128186232
666
1313171717171717172828
5,45,45,47,57,58,98,98,919191919
28,530
25252530303535555570707085
100
363636424250507070
102102102125140
22222225253030454564646465-
4xM54xM54xM54xM54xM54xM64xM64xM84xM8
4xM104xM104xM104xM124xM16
9,59,59,51111
14,314,314,322,522,522,522,53538
F03F03F03F04F04F05F05F07F07F10F10F10F12F14
DN DN H3 H4 H5 B D2 f8 D3 D5 D4 A ISO 5211
venturi-
152025324050
integral8
101520253240
Md(Nm)
+/-20%
556
11182430
3030307070
170170
venturi6580
100125150200
integral506580
100-
150
Md(Nm)
+/-20%
6095
150210210310
170530530530530
1700
DN DN
Drehmomente / Torques
Die Drehmomente Md zum Betätigen der Kugelhähne sind obere Durchschnittswerte laufender Messungen.Das Anfahrdrehmoment ist hierin berücksichtigt. Sie beziehen sich auf den drucklosen Zustand und können je nach Medium, Temperatur, Druck und Schalthäufigkeitvariieren.
The torques Md for the operation of the ball valves are the upper mean values of current measurements. The startingtorque has already been considered. These values refer to the unpressurized condition and can vary depending on medium, temperature, pressure and shift frequency.
KugelhähneBall valves
Nr. 1000 - 1030
MdzulässigAllowable
(Nm)
MdzulässigAllowable
(Nm)
-
Friedrich Krombach GmbH & Co. KG Armaturenwerke D-57202 Kreuztal Postfach 1130Telefon (0 27 32) 520-00 Telefax (0 27 32) 520 100 http//www.krombach.com e Mail: [email protected]
Lochbild-Abmessungen der Schweiß-, Flansch- und GewindeanschlüsseDimensions of master gauge for holes of the welded connection, flanged connection and threaded connection
Form A Form CForm B
venturi152025324050656580
100125150200250
integral10152025324050506580-
100150200
6,58,58,58,5
10,510,51313131515151922
4553
62,871,880,994,2
R/RA55:119,5R/RA66:114
140175206206314388
4xM64xM84xM84xM8
4xM104xM106xM126xM126xM128xM148xM148xM148xM18
10xM20
AAAAAABBCCCCCC
DN +0,2Ø D
±0,1Ø dk
Anzahl und Größeder Schrauben
Quantity and height of the screws
AusführungDesign
Lieferbare Sonderausführungen :
• mit Heizmantel• mit Gewindeanschluss nach NPT• mit Schweißenden nach DIN 11850• mit Schaltwellenverlängerung• in Fire-safe-Ausführung nach BS 6755• mit Kleinflansch nach DIN 28403• andere Werkstoffe• mit Einsteck-Schweißenden
Available special designs:
• With heating jacket• With NPT-threaded ends• With welded ends acc. to DIN 11850• With stem extension• In fire-safe design acc, to BS 6755• With small flange acc. to DIN 28403• Other materials• With socket-weld ends
Die beschriebenen Armaturen entsprechen in Ihrer Konstruktion, ihren Abmessungen, Gewichten und Werkstoffen dem derzeitigen Stand der Technik. Änderungen im Zuge der Weiterentwicklung, sowie die Verwendung gleich- oder höherwertiger Werkstoffe bleiben vorbehalten. Für eventuelle Schreib- oder Übersetzungsfehler übernehmen wir keine Haftung.The construction, the measurements and the weights of the described valves represent the current technical standards. We reserve the right to change the technical details and to use materials of equivalent and higher quality. We cannot be held responsible for any printing or translation errors that might be found in this catalogue.
KugelhähneBall valves
Nr. 1000 - 1030
02/07
-
KugelhähneBall valves
Nr. 1025/1035
FK-Kugelhähne nach DIN 3357
FK ball valves acc. to DIN3357
mit Flanschanschluss PN 16 bis PN 40, Gehäuse in zweiteiliger Ausführung, voller Durchgang, Fire-safe-Design,mit antistatischer Ableitung, Schaltwelle ausblassicher, mit Aufbauflansch für Antriebe nach DIN ISO 5211,und Handbetätigung.Standardausführung wartungsfrei mit federunterstützten Dachmanschetten, TA-Luft.Baulängen nach DIN EN 558-1, Reihe 27 oder 28, Flanschanschlussmaße nach DIN 2501, Dichtleiste nach DIN 2526 Form C.
with flanged connection PN 16 to PN 40, body in two-piece design, full bore, fire-safe-design,with anti-static conductance, stem blow-off proof, with mounting flange for actuators acc. to DIN ISO 5211,with manual operation.Standard design maintenance-free with spring loaded stem sealing, TA-Luft.Face-to-face dimensions acc. to DIN EN 558-1, series 27 or 28, flange dimensions acc. to DIN 2501,sealing surface acc. to DIN 2526 Form C.
Bestell-Nr.Order No.
GehäusewerkstoffMaterial
Werkstoff-Nr.Material No.
PNBaulänge
Face-to-face dimension
KH 1026
KH 1027
KH 1036
KH 1037
16/40
16/40
16/40
16/40
DIN EN 558-1, GR 27
Kurzbaulänge / Short dimension
DIN EN 558-1, GR 28
Langbaulänge / Long dimension
DIN EN 558-1, GR 27
Kurzbaulänge / Short dimension
DIN EN 558-1, GR 28
Langbaulänge / Long dimension
Edelstahlguss / Stainless steel casting
G-X5CrNiMo19-11-2
Edelstahlguss / Stainless steel casting
G-X5CrNiMo19-11-2
warmfester Stahlguss / Steel casting
GP240GH (GS-C25)
warmfester Stahlguss / Steel casting
GP240GH (GS-C25)
1.4408
1.4408
1.0619
1.0619
-
Standardausführung wartungsfrei mit federunterstützten DachmanschettenStandard design maintenance-free with spring loaded stem sealing
DN 15 - 100: Typ / Type B-CDN 125 - 200: Typ / Type A-C
KugelhähneBall valves
Nr. 1025/1035
L1 (DIN EN 558-1 Gr. 27)
L2 (DIN EN 558-1 Gr. 28)
3
1
6
15
20
8
7
4
21
13
18
17
9
5
121910
1411 16
2
øg
DN
øk n
xød
øD
bL0
L
ød
1
H
H1
Handhebel mit Arretiervorrichtung(Bolzen gehört nicht zum Standardlieferumfang)
Hand lever with locking device(Pin does not belong to the standard scope of supply)
ød2 H2
-
Ausführung doppelt gelagertDesign with double bearing
DN 150 - 300
Mögliche ZertifikatePossible certificates
KugelhähneBall valves
Nr. 1025/1035
Gear illustrated in a 90° shifted position
36
34
35
33
29
28
31
32
30
23 24 25 26 27 22
H3 H
4
-
Aufbaumaße entsprechend DIN ISO 5211, Anschlüsse von Schwenkantrieben an ArmaturenMounting dimensions acc. to DIN ISO 5211, connections for part-turn valve actuators
Ausführung Typ A - C bzw. B - CDesign type A - C or B - C
DN 200 - DN 300:
Ausführung mit 1 Passfeder nach DIN 6885Design with 1 fitting key acc. to DIN 6885
Ausführung mit 2 Passfedern nach DIN 6885Design with 2 fitting keys acc. to DIN 6885
Abbildungen zeigen die Armaturen in OffenstellungImages show the valves in open position
DNPNDIN ISO 5211d1d2n x Md4M1hh1h2h3Hb
20010 - 16
F 14175140
4 x M16100403
173962
3632 x 12
20025 - 40
F 14175140
4 x M16100454
216571
40014
25010 - 40
F 14175140
4 x M16100454
1863
100450
2 x 14
30010 - 25
F 16219165
4 x M20130605
2065
12053018
KugelhähneBall valves
Nr. 1025/1035
H1
h0
h1
h4
h2
h3
hød1
ød4
M 1
H1
DNDIN ISO 5211d1d2n x Md4bM1hh0h1h2h3h4
15F 056550
4 x M63510
M14x1,52
168
19-1711-13
30
20 - 25F 056550
4 x M63510
M14x1,52
188
19-1713-15
32
32 - 65F 079070
4 x M85514
M18x1,53
199
24-2220-22
44
80 - 125F 10125102
4 x M107019
M24x23
3416,5
33-3126-28
59
150F 14175140
4 x M1610032
M39x33
5532
68-6620-22
88
j.braunsRechteck
-
PNDNBaumaße
DimensionsFlanschanschlussmaße
Flange dimensionsAusbaumaßeDimensions
GewichtWeight [kg]
L1 L2 L0 D k nxd g b d1 d2 H H1 H2 H3 H4 L B D7 L1 L2mit Handhebel / With hand lever
15 20 25 32 40 50
164016401640164016
115120125130140150170170180180190190325325350
130150160180200230290290310310350350400400450
44 44 48 56 51 61 69 69 73 73 95 95163163175
95105115140150165185185200200220235250270285
65 75 85100110125145145160160180190210220240
4x144x144x144x184x184x184x188x188x188x188x188x228x188x268x22
45 58 68 78 88102122122138138158162188188212
161818181820222224242024222622
15 20 25 32 38 50 65 65 78 78100100125125150
141414181818181825252525252540
56 61 66 88 91 99108108143,5143,5163,5163,5183,5183,5244
78 88 90123126134144144183183205205228228300
91101101143141149159159205205195195221221310
180180180280280280280280400400480480720720720
3,6 4,7 5,3 9,6 9,41217,117,126263738515693
3,8 5,2 5,610,2101319,719,7292940415560102
---------------
---------------
---------------
---------------
mit Schneckengetriebe / With worm gear
150 401625401625401625
350400400400450450450500500
450550550550650650650750750
175200200200225225225250250
300340360375405425450460485
250295310320355370385410430
8x2612x2212x2612x3012x2612x3012x3312x2616x30
218268278285320335345378395
282430342632382834
150200200200250250250300300
404550505050506565
447522522522561561561638638
494579579579618618618700700
360450430430500500500610610
250300300300300300300400400
113165175183280294302443460
122180190198330344362518535
---------
---------
---------
Baumaße und Gewichte / Dimensions and weights
Werkstoffe / Materials
1 2 4 5 6 7 8 91011
131415161718192021222324252627282930313233343536
Pos.Item
Benennung Designation
GehäuseAnschraubteil
SchaltwelleGehäusedichtungDichtschaleSchaltwellendichtungDachmanschettensatzDruckringFührungsbuchseGleitring
SicherungsblechSchaltwellenmutterStiftschraubeHandhebelAnschlagschraubeHandhebelmutterAnpressflanschZylinderschraubeSchraube mit MutterScheibeBuchseBolzenDichtungDeckelSk.-SchraubePassfederO-Ring BuchseHalteringO-RingDruckfederKupplungKonsoleSchraubeSchneckengetriebe
BodyFlange part
StemBody sealingSeatStem sealingSealingPressure ringGuiding bushSliding ring
Locking plateStem nutStud boltHand leverStop screwHand lever nutPress flangeFillister head screwScrew with nutDiscBushBoltSealingCoverHexagon screwLocking keyO-ring bushingRetaining ringO-ringSpringCouplingConsoleScrewWorm gear
Kugel
Tellerfeder
KH 1026 / KH 1027 KH 1036 / KH 1037Werkstoffe/Material W.-Nr./M. No. Werkstoffe/Material W.-Nr./M. No.
GX5CrNiMo19-11-2GX5CrNiMo19-11-2GX5CrNiMo19-11-2X6CrNiMoTi17-12-2X2CrNiMoN22-5-3
X6CrNiMoTi17-12-2
X9CrNi18-8X7CrNiAl17-7X6CrNiMoTi17-12-2A4A4-70
A4A4X6CrNiMoTi17-12-2A4-70A4PTFEIGLIDUR XX6CrNiMoTi17-12-2PTFEX6CrNiMoTi17-12-2A4-70X6CrNiMoTi17-12-2X6CrNiMoTi17-12-2X6CrNiMoTi17-12-2VitonX9CrNi18-8X20Cr13St. verzinkt / St. galvanized5.6div.
3
12
1.44081.44081.44081.45711.4462
1.4571
1.43101.45681.4571 - -
-1.4571 - - - -1.4571 -1.4571 -1.45711.45711.4571 -1.43101.4021
-
GP240GH (GS-C25)GP240GH (GS-C25)GX5CrNiMo19-11-2X6CrNiMoTi17-12-2X2CrNiMoN22-5-3
X6CrNiMoTi17-12-2
X6CrNiMoTi17-12-2A4A4-70
A4A4StA2-70StPTFEIGLIDUR XX20Cr13PTFES235JRG2 (RSt37-2)5.6StX6CrNiMoTi17-12-2St. vernickelt / St.-nickel-platedVitonX9CrNi18-8X20Cr13St. verzinkt / St. galvanized5.6div.
51CrV4
1.06191.06191.44081.45711.4462
1.4571
1.4571 - -
-
-
- -1.4021 -1.0038 -
1.4571
-1.43101.4021
-
1.8159
PTFE (Fire-safe: Reingrafit) / PTFE (Fire-safe: Pure graphite)PTFE (TFM)
PTFE
PTFEPTFE/Kohle / PTFE/Coal
Ball
Cup spring
PTFE/PTFE leitfähig/Fire-safe: Reingrafit / PTFE/PTFE Conductive/Fire-safe: Pure graphite
40
65
80
100
125
150
200
250
300
KugelhähneBall valves
Nr. 1025/1035
Edelstahl / Stainless steel
244261261261300300300335335
-
Friedrich Krombach GmbH & Co. KG Armaturenwerke D-57202 Kreuztal Postfach 1130Telefon (0 27 32) 520-00 Telefax (0 27 32) 520 100 http//www.krombach.com e Mail: [email protected]
Betr
iebs
druc
k [b
ar]
Wor
king
pre
ssur
e [b
ar]
Betriebstemperatur [°C]Working temperature [°C]
Andere Druck-Temperaturbereiche sind durch die Wahl anderer Dichtungswerkstoffe möglich.
Other pressure-temperature ranges are possible if other sealing materials are choosen.
Bei Temperaturen unter -10°C bitte AD-Merkblatt W 10 beachten.At temperatures less -10°C, please heed to AD-Merkblatt W10.
Differenzdruck [bar] / Differential pressure [bar]
DN 15 20 25 32 40 50 65 80100125150200250300
bis 1010…1312…1615…2030…3835…4350…6560…7870…91
100…130170…220350…450
800…10001300…17001800…2400
1611…1513…1716…2132…4137…4853…6863…8274…96
105…137190…250450…590
800…10001400…18002000…2600
2511…1513…1716…2133…4339…5055…7266…86
77…100110…143220…285550…720
900…12001600…23002200…2800
4012…1614…1817…2235…4540…5258…7569…90
81…105115…150255…330630…820
1100…14501800…23002600…3400
44 62 62 115 115 115 115 450 450 4501300165026306200
Anfahrdrehmomente [Nm]
Richtwerte für schmierende Medien(z.B. Wasser, Öle bei 20°C)
Starting torques [Nm]Standard values for lubricated mediums(i.e. water, oils at 20°C)
The starting torque is considerably influenced by the number of the Das Anfahrmoment wird erheblich durch die Schalthäufigkeit shift frequency.beeinflusst.The smaller value of the table corresponds to shift frequency.Der kleinere Wert der Tabelle entspricht häufiger Schaltung.The greater value corresponds to a longer downtime.Der größere Wert entspricht längerem Stillstand.
ATTENTION!ACHTUNG!If non-lubrication mediums (i.e. benzine, gases) or adhesive mediums Bei nicht schmierenden Medien (z.B. Benzine, Gase) oder are used an increasing of the values has to be considered.anhaftenden Medien ist eine entsprechende Erhöhung der Werte zu
berücksichtigen
Prüfdrücke Test pressuresGehäuse: 1,5 x PN Wasser, 6 bar Luft Body: 1,5 x PN water; 6 bar airAbschluss: 1,1 x ∆p Wasser, 6 bar Luft Seat: 1,1 x ∆p water; 6 bar air
Die k -Werte bei Kugelhähnen mit vollem Durchgang entsprechen The k -values of ball valves with full bore correspond to the VS VSden vergleichbaren Rohrlängen mit gleichem Durchmesser comparable pipe lengths with the same diameter.
Lieferbare Sonderausführungen: Special designs:• Fire-safe nach BS 6755 bzw. DIN EN ISO 10497 • Fire-safe acc. to BS 6755 or DIN EN ISO 10497• mit Heizmantel (nur Baulänge DIN EN 558-1, GR 28) • With heating jacket (only face-to-face dimensions DIN EN 558-1, series 28)• mit Schaltwellenverlängerung • With stem extension• mit elektrischem, pneumatischem oder hydraulischem Antrieb • With electric, pneumatic or hydraulic actuator• mit anderer Flanschbearbeitung • With other flange design• mit Druckentlastungsbohrung • With pressure relief bore
KugelhähneBall valves
Nr. 1025/1035
Die beschriebenen Armaturen entsprechen in Ihrer Konstruktion, ihren Abmessungen, Gewichten und Werkstoffen dem derzeitigen Stand der Technik. Änderungen im Zuge der Weiterentwicklung, sowie die Verwendung gleich- oder höherwertiger Werkstoffe bleiben vorbehalten. Für eventuelle Schreib- oder Übersetzungsfehler übernehmen wir keine Haftung.The construction, the measurements and the weights of the described valves represent the current technical standards. We reserve the right to change the technical details and to use materials of equivalent and higher quality. We cannot be held responsible for any printing or translation errors that might be found in this catalogue.
Md.zulässig
Mt.Allowable
05/09
-
Gehäuse in zweiteiliger Ausführung, voller Durchgang, firesafe-Design,mit antistatischer Ableitung, Schaltwelle ausblassicher, mit Aufbauflansch für Antriebe nach DIN-ISO 5211,mit Handhebelbetätigung.Flanschanschlussmaße nach DIN 2501. Baulänge nach EN 558-1, Reihe 11.
FK-Kompakt-Kugelhähne zum Einklemmen zwischen Flanschen PN 16 bis PN 160
FK-Compakt ball valves to clamp between flanges PN 16 up to PN 160Body in two-piece design, full bore, fire-safe design,with antistatic conductance, stem blow-off-proof, with mounting flange for actuators acc. to DIN-ISO 5211,with manual operation.Flange dimensions acc. to DIN 2501. Face to face dimension acc. to EN 558-1, series 11.
Bestell-Nr.Order No. PN
WerkstoffMaterial
Werkstoff-Nr.Material No.
DichtleisteSealing surface
KH 1046
KH 1047
KH 1048
KH 1049
16/40
16/40
63-160
63-160
Schmiedestahl
Edelstahl
Schmiedestahl
Edelstahl
Forged steel
Stainless steel
Forged steel
Stainless steel
P250GH (C22.8)
X6CrNiMoTi17-12-2
P250GH (C22.8)
X6CrNiMoTi17-12-2
1.0460
1.4571
1.0460
1.4571
DIN 2526 Form C
DIN 2526 Form C
DIN 2526 Form E
DIN 2526 Form E
KugelhähneBall valves
Nr. 1045
-
nxd
Ausführung PN 16/40Design PN 16/40
Ausführung PN 63 - 160Design PN 63 - 160
KugelhähneBall valves
Nr. 1045
-
AufbauflanschMounting flangeDIN ISO 5211
GewichtWeight
[kg]DN PN
BaumaßeDimensions
FlanschanschlussFlange connection
L L1 h1 H2 D k nxd t t1KH 1046, KH 1047 (PN 16/40)
KH 1048, KH 1049 (PN 63 - 160)
152025324050
65
80
100
152540
50
65
80
100
16/40
1640
16/401640
63-160
63100160
63100160
63100160
63100
5764707683
102108108121146146
180180180280280280400400400480480
36,5 38 41 58 64 71 81 81 90111111
808286
115120125140140160176176
95105115140150165185185200240240
657585
100110125145145160180190
4xØ144xØ144xØ144xØ184xØ184xØ184xØ188xØ188xM168xM168xM20
--------
252424
-----------
F04F04F04F05F05F05F05F05F10F10F10
3,04,25,48,7
10,615,520,020,025,342,842,8
577083
102102102108108108121121121146146
180180280280280280400400400400400400480480
43 58 64 93 93 93 95 95 95 98 98 98115115
8086
120125125125140140140160160160176176
105140170180195195205220220215230230250265
75100125135145145160170170170180180200210
4xØ144xØ184xØ224xØ224xØ264xØ268xØ228xØ268xØ268xM208xM248xM248xM248xM27
---------
2631313142
---------
2525252525
F04F04F05F07F07F07F10F10F10F10F10F10F10F10
3,88,2
13,818,822,322,325,229,429,429,934,934,947,354,2
Baumaße und GewichteDimensions and weights
WerkstoffeMaterials
Pos.Item
1
2
4
5
6
7
8
9
10
11
12
13
14
15
16
Benennung
Gehäuse
Flanschteil
Schaltwelle
Gehäusedichtung
Dichtschale
Schaltwellendichtung
Stopfbuchsdichtung
Druckring
Sicherungsblech
Schaltwellenmutter
Zylinderschraube
Handhebel
Anschlagschraube
Handhebelmutter
Tellerfeder
Body
Flange part
Stem
Body sealing
Seat
Stem sealing
Stuffing box sealing
Pressure ring
Locking plate
Stem nut
Filliste head screw
Hand lever
Stop screw
Hand lever nut
Cup-spring
Designation
KH 1046, KH 1048 KH 1047, KH 1049
WerkstoffMaterial
Werkst.-Nr.Mat. No.
WerkstoffMaterial
Werkst.-Nr.Mat. No.
P250GH (C22.8)
P250GH (C22.8)
X6CrNiMoTi17-12-2
GX5CrNiMo19-11-2
X2CrNiMoN22-5-3
PTFE
PTFE / PTFE
PTFE-Kohle / Coal
PTFE / PTFE
X6CrNiMoTi17-12-2
X6CrNiMoTi17-12-2
A4
8.8 (A2-70)
St
8.8
A4
51CrV4
1.0460
1.0460
1.4571
1.4408
1.4462
-
-
-
-
1.4571
1.4571
-
-
-
-
-
1.8159
X6CrNiMoTi17-12-2
X6CrNiMoTi17-12-2
X6CrNiMoTi17-12-2
GX5CrNiMo19-11-2
X2CrNiMoN22-5-3
PTFE
PTFE / PTFE
PTFE-Kohle / Coal
PTFE / PTFE
X6CrNiMoTi17-12-2
X6CrNiMoTi17-12-2
A4
A4-70
X6CrNiMoTi17-12-2
A4-70
A4
X9CrNi18-8
1.4571
1.4571
1.4571
1.4408
1.4462
-
-
-
-
1.4571
1.4571
-
-
1.4571
-
-
1.4310
leitfähigconductive
leitfähigconductive
3 Kugel Ball
KugelhähneBall valves
Nr. 1045
-Kohle-Coal
-Kohle-Coal
-
Friedrich Krombach GmbH & Co. KG Armaturenwerke D-57202 Kreuztal Postfach 1130Telefon (0 27 32) 520-00 Telefax (0 27 32) 520 100 http//www.krombach.com e Mail: [email protected]
Andere Druck-Temperaturbereiche sind durch die Wahlanderer Dichtungswerkstoffe möglich.Other pressure-temperature ranges are possible if othersealing materials are choose.
Bei Temperaturen unter -10°C bitte AD-Merkblatt W 10 beachten.At temperatures less -10°C please heed to AD-Merkblatt W10
The starting torque is considerably influenced by the number of the Das Anfahrmoment wird erheblich durch die Schalthäufigkeitshift frequency.beeinflusst.The smaller value of the table corresponds to shift frequency.Der kleinere Wert der Tabelle entspricht häufiger Schaltung.The greater value corresponds to a longer down time.Der größere Wert entspricht längerem Stillstand.
ATTENTION!ACHTUNG!If non-lubrication mediums (i.e. benzine, gases) or adhesive mediums Bei nicht schmierenden Medien (z.B. Benzine, Gase) oder
anhaftenden Medien ist eine entsprechende Erhöhung der Werte zu are used an increasing of the values has to be considered.berücksichtigen
Prüfdrücke Test pressuresGehäuse: 1,5 x PN Wasser, 6 bar Luft Body: 1,5 x PN water; 6 bar airAbschluss: 1,1 x PN Wasser, 6 bar Luft Seat: 1,1 x PN water; 6 bar air
Die k -Werte bei Kugelhähnen mit vollem Durchgang entsprechen The k -values of ball valves with full bore correspond to the VS VSden vergleichbaren Rohrlängen mit gleichem Durchmesser comparable pipe lengths with the same diameter.
Lieferbare Sonderausführungen: Special designs:• andere Werkstoffe • Other materials• mit Heizmantel • With heating jacket (only face-to-face dimensions F17)• mit Schaltwellenverlängerung • With stem extension• mit elektrischem, pneumatischem oder hydraulischem Antrieb • With electric, pneumatic or hydraulic actuator• mit anderer Flanschbearbeitung • With other flange design• mit Druckentlastungsbohrung • With pressure relief bore
Betr
iebs
druc
k[b
ar]
Wor
king
pres
sure
[bar
]
Betriebstemperatur [°C]Working temperature [°C]
Anfahrdrehmomente [Nm] - Richtwerte für schmierende Medien (z.B. Wasser, Öle bei 20°C)Starting torques [Nm] - Standard values for lubricated mediums (i.e. water, oils at 20°C)
Differenzdruck [bar] / Differential pressure [bar]
DN152025324050656580
100
PN16-16016-40
16-16016-40
16-16016-16016-40
63-16016-16016-100
bis 1010...1312...1615...2030...3835...4350...6560...7860...7870...91
100...130
1611...1513...1716...2132...4137...4853...6863...8263...8274...96
105...137
2511...1513...1716...2133...4339...5055...7266...8666...86
77...100110...143
4012...1614...1817...2235...4540...5258...7569...9069...90
81...105115...150
6313...17
-18...23
-42...5561...79
-72...94
111...144205...267
10014...18
-19...25
-44...5764...83
-96...125
162...211312...406
16015...20
-20...26
-46...6073...95
-144...187244...317
-
446262
115115115115450450450
Druck-Temperatur-ZuordnungPressure-temperature-rating
Die beschriebenen Armaturen entsprechen in Ihrer Konstruktion, ihren Abmessungen, Gewichten und Werkstoffen dem derzeitigen Stand der Technik. Änderungen im Zuge der Weiterentwicklung, sowie die Verwendung gleich- oder höherwertiger Werkstoffe bleiben vorbehalten. Für eventuelle Schreib- oder Übersetzungsfehler übernehmen wir keine Haftung.The construction, the measurements and the weights of the described valves represent the current technical standards. We reserve the right to change the technical details and to use materials of equivalent and higher quality. We cannot be held responsible for any printing or translation errors that might be found in this catalogue.
KugelhähneBall valves
Nr. 1045
Md.zulässig
Mt.Allowable
02/07
-
Gehäuse mit Einschraubstück, voller Durchgang, firesafe-Design,mit antistatischer Ableitung, Schaltwelle ausblassicher, mit Aufbauflansch für Antriebe nach DIN ISO 5211,mit Handhebelbetätigung.Flanschanschlussmaße nach DIN 2501. Baulänge nach EN 558-1, Reihe 11.
FK-Kompakt-Kugelhähne zum Einklemmen zwischen Flanschen PN 16 bis PN 40
FK-Compakt ball valves to clamp between flanges PN 16 up to PN 40Body with inserted part, full bore, fire-safe design,with antistatic conductance, stem blow-off-proof, with mounting flange for actuators acc. to DIN ISO 5211,with manual operation.Flange dimensions acc. to DIN 2501. Face to face dimension acc. to EN 558-1, series 11.
Bestell-Nr.Order No. PN
WerkstoffMaterial
Werkstoff-Nr.Material No.
DichtleisteSealing surface
KH 1046.1
KH 1047.1
16/40
16/40
Schmiedestahl
Edelstahl
Forged steel
Stainless steel
P250GH (C22.8)
X6CrNiMoTi17-12-2
1.0460
1.4571
DIN 2526 Form C
DIN 2526 Form C
KugelhähneBall valves
Nr. 1045.1
-
Ausführung DN 80 und 100Design DN 80 and 100
Ausführung DN 15 bis 65Design DN 15 up to 65
KugelhähneBall valves
Nr. 1045.1
-
Baumaße und GewichteDimensions and weights
AufbauflanschMounting flangeDIN ISO 5211
GewichtWeight
[kg]DN PN
BaumaßeDimensions
FlanschanschlussFlange connection
L L1 h1 H2 D k nxd t t1KH 1046.1, KH 1047.1 (PN 16/40)
152025324050
65
80
100
16/40
1640
16/401640
5764707683
102108108121146146
180180180280280280400400400480480
36,5 38 41 62 65 73 83 83 90102102
808285
100104112122122170175175
95105115140150165185185200220235
657585
100110125145145160180190
4xØ144xØ144xØ144xØ184xØ184xØ184xØ188xØ188xM168xM168xM20
--------
252325
-----------
F04F04F04F05F05F05F05F05F10F10F10
2,73,64,68,09,5
14,018,017,224,942,842,8
d1
1520253238506565789696
WerkstoffeMaterials
Pos.Item
1
2
4
5
6
7
8
9
10
11
12
13
14
15
Benennung
Gehäuse
Einschraubteil
Schaltwelle
Gehäusedichtung
Dichtschale
Schaltwellendichtung
Stopfbuchsdichtung
Druckring
Sicherungsblech
Schaltwellenmutter
Handhebel
Anschlagschraube
Handhebelmutter
Tellerfeder
Body
Screw part
Stem
Body sealing
Seat
Stem sealing
Stuffing box sealing
Pressure ring
Locking plate
Stem nut
Hand lever
Stop screw
Hand lever nut
Cup-spring
DesignationKH 1046.1 KH 1047.1
WerkstoffMaterial
Werkst.-Nr.Mat. No.
WerkstoffMaterial
Werkst.-Nr.Mat. No.
P250GH (C22.8)
P250GH (C22.8)
X6CrNiMoTi17-12-2
GX5CrNiMo19-11-2
X2CrNiMoN22-5-3
PTFE
TFM
PTFE
PTFE / PTFE
X6CrNiMoTi17-12-2
X6CrNiMoTi17-12-2
5-2
St verzinkt / galvanized
8.8
5.6
51CrV4
1.0460
1.0460
1.4571
1.4408
1.4462
-
-
-
-
1.4571
1.4571
-
-
-
-
1.8159
X6CrNiMoTi17-12-2
X6CrNiMoTi17-12-2
X6CrNiMoTi17-12-2
GX5CrNiMo19-11-2
X2CrNiMoN22-5-3
PTFE
TFM
PTFE
PTFE / PTFE
X6CrNiMoTi17-12-2
X6CrNiMoTi17-12-2
A4
St verzinkt / galvanized
A4-70
A4
X9CrNi18-8
1.4571
1.4571
1.4571
1.4408
1.4462
-
-
-
-
1.4571
1.4571
-
-
-
-
1.4310
leitfähigconductive
leitfähigconductive
3 Kugel Ball
KugelhähneBall valves
Nr. 1045.1
-
Friedrich Krombach GmbH & Co. KG Armaturenwerke D-57202 Kreuztal Postfach 1130Telefon (0 27 32) 520-00 Telefax (0 27 32) 520 100 http//www.krombach.com e Mail: [email protected]
Andere Druck-Temperaturbereiche sind durch die Wahlanderer Dichtungswerkstoffe möglich.Other pressure-temperature ranges are possible if othersealing materials are choosen.
Bei Temperaturen unter -10°C bitte AD-Merkblatt W 10 beachten.At temperatures less -10°C, please heed to AD-Merkblatt W10
The starting torque is considerably influenced by the number of the Das Anfahrmoment wird erheblich durch die Schalthäufigkeitshift frequency.beeinflusst.The smaller value of the table corresponds to shift frequency.Der kleinere Wert der Tabelle entspricht häufiger Schaltung.The greater value corresponds to a longer down time.Der größere Wert entspricht längerem Stillstand.
ATTENTION!ACHTUNG!If non-lubrication mediums (i.e. benzine, gases) or adhesive mediums Bei nicht schmierenden Medien (z.B. Benzine, Gase) oder
anhaftenden Medien ist eine entsprechende Erhöhung der Werte zu are used an increasing of the values has to be considered.berücksichtigen
Prüfdrücke Test pressuresGehäuse: 1,5 x PN Wasser, 6 bar Luft Body: 1,5 x PN water; 6 bar airAbschluss: 1,1 x PN Wasser, 6 bar Luft Seat: 1,1 x PN water; 6 bar air
Die k -Werte bei Kugelhähnen mit vollem Durchgang entsprechen The k -values of ball valves with full bore correspond to the VS VSden vergleichbaren Rohrlängen mit gleichem Durchmesser comparable pipe lengths with the same diameter.
Lieferbare Sonderausführungen: Special designs:• andere Werkstoffe • Other materials• mit Heizmantel • With heating jacket (only face-to-face dimensions F17)• mit Schaltwellenverlängerung • With stem extension• mit elektrischem, pneumatischem oder hydraulischem Antrieb • With electric, pneumatic or hydraulic actuator• mit anderer Flanschbearbeitung • With other flange design• mit Druckentlastungsbohrung • With pressure relief bore
Betr
iebs
druc
k[b
ar]
Wor
king
pres
sure
[bar
]
Betriebstemperatur [°C]Working temperature [°C]
Anfahrdrehmomente [Nm] - Richtwerte für schmierende Medien (z.B. Wasser, Öle bei 20°C)Starting torques [Nm] - Standard values for lubricated mediums (i.e. water, oils at 20°C))
Differenzdruck [bar] / Differential pressure [bar]
DN1520253240506580
100
PN16-4016-4016-4016-4016-4016-4016-4016-4016-40
bis 1010...1312...1615...2030...3835...4350...6560...7870...91
100...130
1611...1513...1716...2132...4137...4853...6863...8274...96
105...137
2511...1513...1716...2133...4339...5055...7266...86
77...100110...143
4012...1614...1817...2235...4540...5258...7569...90
81...105115...150
6313...17
-18...23
-42...5561...79
-111...144205...267
10014...18
-19...25
-44...5764...83
-162...211312...406
16015...20
-20...26
-46...6073...95
-244...317
-
446262
115115115115450450
Druck-Temperatur-ZuordnungPressure-temperature-rating
Die beschriebenen Armaturen entsprechen in Ihrer Konstruktion, ihren Abmessungen, Gewichten und Werkstoffen dem derzeitigen Stand der Technik. Änderungen im Zuge der Weiterentwicklung, sowie die Verwendung gleich- oder höherwertiger Werkstoffe bleiben vorbehalten. Für eventuelle Schreib- oder Übersetzungsfehler übernehmen wir keine Haftung.The construction, the measurements and the weights of the described valves represent the current technical standards. We reserve the right to change the technical details and to use materials of equivalent and higher quality. We cannot be held responsible for any printing or translation errors that might be found in this catalogue.
KugelhähneBall valves
Nr. 1045.1
Md.zulässig
Mt.Allowable
02/07
-
KugelhähneBall valves
Nr. 1060
FK-Kugelhähne PN 40 - PN 63Mit Gewinde nach ISO 7/1 (DIN 2999, Teil 1), mit vollem Durchgang, Dichtschalen aus PTFE , doppelseitig dichtend, Schaltwellenabdichtung durchPTFE-Dichtringe, Schaltgriff aus nichtrostendem Edelstahl (1.4021), mit gelbem Plastiküberzug oder aus Leichtmetall.
FK ball valves PN 40 - PN 63With threaded ends acc. to ISO 7/1 (DIN 2999, part 1), with full bore, PTFE seats, double sided sealed, stem sealing by PTFE sealing rings, operatinghandle mach of rustproof stainless steel (1.4021) with yellow plastic cover or made of light-metal.
Bestell-Nr.Order no.
Ausführung Design
Werkstoffe / Materials
Gehäuse, SchaltwelleBody, Stem
KugelBall
KH 1061 T
KH 1062 T
beiderseits Muffenanschluss
Muffe / AußengewindeCuZn39Pb3 (MS 58)
2.0401vernickelt
Nickel-plated
CuZn39Pb3 (MS 58)2.0401
hartverchromtHard chrome-plated
Both sides with female screwed ends
One side with female threaded end other side withmale threaded endBoth sides with female threadedends in oil and grease free designwith stem extension for insulation (to Rp 2")
beiderseits Muffenanschluss,mit Schaltwellenverlängerunggeeignet zur Isolierung (-bis Rp 2")
Kh 1063 T
-
Friedrich Krombach GmbH & Co. KG Armaturenwerke D-57202 Kreuztal Postfach 1130Telefon (0 27 32) 520-00 Telefax (0 27 32) 520 100 http//www.krombach.com e Mail: [email protected]
* Abmessung bei Schaltwellenverlängerung / Dimensions with stem extension
DNE H
t 1 l L SW
Gewicht in gWeight in g
1061,1062 1061,1062 1061,10621063* 1063* 1063
Rp 1/4
Rp 3/8
Rp 1/2
Rp 3/4
Rp 1
Rp 1 1/4
Rp 1 1/2
Rp 2
Rp 2 1/2
Rp 3
95
95
95
115
115
155
155
175
215
232
110
110
110
130
130
160
160
188
-
-
42
42
45
54
58
75
81
96
107
134
102,5
103,5
106
120
124,5
141
147,5
170
-
-
10
11,4
15
16,3
19,1
21,4
21,4
25,7
30.1
33,3
22
24,5
31
35
42
49
53
63
76
88
44
49
62
70
84
98
106
126
152
176
19
21
25
31
39
48
54
67
86
100
126
130
190
310
520
845
1095
1835
3400
5200
180
185
250
430
650
1050
1350
2450
-
-
Teil123456789
BennenungGehäuseMuffenanschlussKugelSchaltwelleDichtschalenDichtungSchaltwellendichtungStopfbuchsmutterSechskantmutterGriff mit gelbem Plastiküberzugoder aus Aluminium bei KH 1063 T
DesignationBodySocket connectionBallStemSeatSealingStem sealingStuffing box nutHex.-nutHandle with yellow plastic cover or light-metal
Werkstoffe / MaterialsCuZn39Pb3CuZn39Pb3CuZn39Pb3CuZn39Pb3PTFEPTFEPTFECuZn39Pb3CuZn39Pb3X20Cr13
2.04012.04012.04012.0401---2.04012.04011.4021
10
Die beschriebenen Armaturen entsprechen in Ihrer Konstruktion, ihren Abmessungen, Gewichten und Werkstoffen dem derzeitigen Stand der Technik. Änderungen im Zuge der Weiterentwicklung, sowie die Verwendung gleich- oder höherwertiger Werkstoffe bleiben vorbehalten. Für eventuelle Schreib- oder Übersetzungsfehler übernehmen wir keine Haftung.The construction, the measurements and the weights of the described valves represent the current technical standards. We reserve the right to change the technical details and to use materials of equivalent and higher quality. We cannot be held responsible for any printing or translation errors that might be found in this catalogue.
KugelhähneBall valves
Nr. 1060
Einsatzbereich für Serien-Ausführung mit Teflon-Dichtgarnitur:• Wasser im Temperaturbereich von 4°C bis 160° C• gesättigter Dampf• Druckluft• Gas• Öl, Kraftstoffe mit hohem Benzolanteil, Heizöl• Lösungsmittel, Farben, Lacke,• in bedingtem Umfang auch schwache Laugen und Säurenmax. Einsatzbereich von -20°C bis + 150° CVakuumdicht bis 10 Torr.-3
Application range for valves for standard design with Teflon sealing• Water of the temperature range from 4°C up to 160°C• Saturated steam• Compressed air• Gas• Oil, fuels with a high percentage of benzine, fuel oil • Solvents, paints and varnishes• Even weak acids and alkaline solutions to a limited extentMax. application range from -20°C up to +150°C,Vacuum tightness up to 10 Torr-3
Bet
riebs
druc
kW
orki
ngpr
essu
re
BetriebstemperaturWorking temperature
04/08
H
Sattdampf-LinieSaturated steam line
-
KugelhähneBall valves
Nr. 1070
FK-Kugelhähne PN 40 - PN 63 nach DIN 3357 mit Gewinde nach ISO 7/1 (DIN 2999, Teil 1), mit vollem Durchgang, Dichtschalen aus PTFE , doppelseitig dichtend, Schaltwellenabdichtung durch PTFE-Dichtringe, Schaltgriff aus nichtrostendem Edelstahl (1.4021), mit gelbem Plastiküberzug oder mit aufgeschraubtem Flügelgriff aus Leichtmetall (gelb einbrennlackiert), Baulänge nach DIN EN 558-1 (mit Muffenanschluss).FK-Kugelhähne KH 1078 T, DIN-Modell mit DVGW-Reg.-Nr.Schaltwellenabdichtung durch O-Ringe aus Viton, Schaltgriff mit schwarzem Plastiküberzug, mit Zulassung für Gas nach EN 331, MOP 5,für Druckluft und Wasser geeignet bis max. 40/63 bar zulässigen Betriebsdruck.
FK ball valves PN 40 - PN 63 acc. to DIN 3357 with female threaded ends acc. to ISO 7/1 (DIN 2999, part 1), with full bore, PTFE seats, double sided sealed, stem sealing by PTFE sealing rings, operating handle made of stainless steel (1.4021), with yellow plastic cover or screwed-on light-metal wing handle (with yellow stove finish), face-to-face dimension acc. to DIN EN 558-1 (with female threaded body ends).FK ball valves KH 1078 T, DIN model with DVGW Approval No. Stem sealing by Viton; operating handle with black plastic coating; with permission for gas acc. to EN 331, MOP 5, for compressed air and water service; up to max. 40/63 bar of allowable working pressure
CuZn39Pb3 (MS 58)2.0401vernickeltnickel plated
CuZn39Pb3 (MS 58)2.0401hartverchromthard chromium plated
CuZn39Pb3 (MS 58)2.0401vernickeltnickel plated
Bestell-Nr.Order No.
Ausführung DesignWerkstoffe / Materials
Gehäuse, SchaltwelleBody, Stem
KugelBall
KH 1071 T
KH 1072 T
KH 1074 T
beiderseits Muffenanschluss
Muffe / Außengewinde
beiderseits Muffenanschluss,in öl- und fettfreier Ausführung
KH 1075 T
KH 1076 T
beiderseits Muffenanschluss
Muffe / Außengewinde
Kugelhähne mit Flügelgriff PN 40 - PN 63 / Ball valves with wing handle PN 40 - PN 63
CuZn39Pb3 (MS 58)2.0401vernickeltnickel plated
KH 1078 T beiderseits Muffenanschluss bis Rp 2
Kugelhähne PN 40 - PN 63, DIN-Modell mit DVGW-Reg.-Nr. / Ball valves PN 40 - PN 63, DIN model with DVGW Appr. No.
Kugelhähne mit Schaltgriff PN 40 - PN 63 / Ball valves with operating handle PN 40 - PN 63
CuZn39Pb3 (MS 58)2.0401hartverchromthard chromium plated
CuZn39Pb3 (MS 58)2.0401hartverchromthard chromium plated
Both sides with female threaded ends
Both sides with female threaded ends
Both sides with female threaded endsup to Rp 2
One side with female threaded endother side with male threaded end
Both sides with female threaded endsin oil and grease free design
One side with female threaded endother side with male threaded end
-
KugelhähneBall valves
Nr. 1070
H
E
DN
SW
L1
L
t1t1
L1
-
Baumaße und Gewichte für KH 1071T, KH 1072T, KH 1075T und KH 1076TDimensions and weights for KH 1071T, KH 1072T, KH 1075T and KH 1076T
Rp 1/4
Rp 3/8
Rp 1/2
Rp 3/4
Rp 1
Rp 1 1/4
Rp 1 1/2
Rp 2
Rp 2 1/2
DN SW
GewichtWeight
[g]L
46
52
66
76
90
110
120
140
164
H
42
42
46
55
60
77
78
100
110
L1
23
26
33
38
45
55
60
70
82
E
95
95
95
115
115
155
155
175
232
t1
10
11,4
15
16,3
19,1
21,4
21,4
25,7
30,1
19
22
27
32
41
50
55
70
90
200
220
270
450
730
1240
1700
3000
DN SW
Rp 1/4
Rp 3/8
Rp 1/2
Rp 3/4
Rp 1
Rp 1 1/4
Rp 1 1/2
Rp 2
H
42
42
46
55
60
77
78
100
E
95
95
95
115
115
155
155
175
t1
10
11,4
15
16,3
19,1
21,4
21,4
25,7
L1
23
26
33
38
45
55
60
70
L
46
52
66
76
90
110
120
140
19
22
27
32
41
50
55
70
200
220
270
450
730
1240
1700
3003
Baumaße und Gewichte für KH 1078TDimensions and weights for KH 1078T
GewichtWeight
[g]
Teil123456789
BennenungGehäuseMuffenanschlussKugelSchaltwelleDichtschalenDichtungSchaltwellendichtungStopfbuchsmutterSechskantmutterGriff mit gelbem Plastiküberzug
DesignationBodySocket connectionBallStemSeatSealingStem sealingStuffing box nutHex.-nutHandle with yellow plastic cover
Werkstoffe / MaterialsCuZn39Pb3CuZn39Pb3CuZn39Pb3CuZn39Pb3PTFEPTFEPTFE*CuZn39Pb3CuZn39Pb3
2.04012.04012.04012.0401
---
2.04012.04011.4021
*Bei Bestell-Nr. KH 1078 T Werkstoff Viton / For order no. KH 1078 T = Viton
10X20Cr13oder Leichtmetall / Or light-metal
WerkstoffeMaterials
KugelhähneBall valves
Nr. 1070
SW = Schlüsselweite / SW = Wrench size
-
Friedrich Krombach GmbH & Co. KG Armaturenwerke D-57202 Kreuztal Postfach 1130Telefon (0 27 32) 520-00 Telefax (0 27 32) 520 100 http//www.krombach.com e Mail: [email protected]
Die beschriebenen Armaturen entsprechen in Ihrer Konstruktion, ihren Abmessungen, Gewichten und Werkstoffen dem derzeitigen Stand der Technik. Änderungen im Zuge der Weiterentwicklung, sowie die Verwendung gleich- oder höherwertiger Werkstoffe bleiben vorbehalten. Für eventuelle Schreib- oder Übersetzungsfehler übernehmen wir keine Haftung.The construction, the measurements and the weights of the described valves represent the current technical standards. We reserve the right to change the technical details and to use materials of equivalent and higher quality. We cannot be held responsible for any printing or translation errors that might be found in this catalogue.
KugelhähneBall valves
Nr. 1070
Einsatzbereich für Serien-Ausführung mit Dichtgarnitur: PTFE• Wasser im Temperaturbereich von 4°C bis 160° C• gesättigter Dampf• Druckluft• Gas• Öl, Kraftstoffe mit hohem Benzolanteil, Heizöl• Lösungsmittel, Farben, Lacke,• in bedingtem Umfang auch schwache Laugen und Säurenmax. Einsatzbereich von -20°C bis +60° CVakuumdicht bis 10 Torr.
Einsatzbereich für Serien-Ausführung mit Dichtgarnitur: PTFE / Viton (Bestell-Nr. KH 1078 T - DIN DVGW)Druckluft und Wasser im Temperaturbereich von 4° C bis 100° C bis max. 40 bar zugelassen für Gase nach DVGW-Arbeitsblatt G 260 PN 1.
-3
Application range for valves for standard design with PTFE sealing • Water of the temperature range from 4°C up to 160°C• Saturated steam• Compressed air• Gas• Oil, fuels with a high percentage of benzine, fuel oil• Solvents, paints and varnishes• Even weak acids and alkaline solutions to a limited extentMax. application range from -20°C up to +60°C,Vacuum tightness up to 10 Torr
Application range for valves for series design with PTFE / Vition sealing (Order No. KH 1078 T - DIN DVGW)Compressed air and water in the temperature range from 4°C up to 100°C, max. 40 bar, approved for gases to DVGW Work Sheet G 260 PN 1.
-3
05/09
Betr
ieb
sdru
ck
Wo
rkin
g p
ress
ure
BetriebstemperaturWorking temperature
Sattdampf-LinieSaturated steam line
Betr
ieb
sdru
ck
Wo
rkin
g p
ress
ure
BetriebstemperaturWorking temperature
KH 1071T, KH 1072T, KH 1075T und / and KH 1076T
KH 1074T und / and KH 1078T
-
Gehäuse aus Pressmessing vernickelt, mit angepresstem Aufbauflansch, Kugel aus Messing verchromt, mit vollem Durchgang, Dichtschalen aus PTFE, doppelseitig dichtend, Schaltwellenabdichtung durch O-Ringe aus Viton,Baulänge nach DIN 3202 M3, Gewinde nach ISO 7/1 (DIN 2999, Teil 1), mit Kupplungsstück aus Stahl verzinkt.
FK-Kugelhähne PN 40 nach DIN 3357
FK-ball valve PN 40 acc. to DIN 3357FK-ball valve made of brass nickel-plated, with pressed mounting flange, ball made of brass chrome-plated, with full bore, seat made of PTFE, double sided sealed, stem sealing with o-ring, face-to-face dimension acc. to DIN 3202 M3, threaded ends acc. to ISO 7/1 (DIN 2999, part 1), with coupling unit made of galvanized steel
Bestell-Nr.Order No. PN
Werkstoffe / MaterialsAusführung
Design
beiderseits MuffenanschlussBoth sides with
female threaded endsKH 1079 T 40
Gehäuse, Einschraubteil,Schaltwelle
Body, screw part, stem
KugelBall
KupplungsstückCoupling
CuZn40Pb2 2.0402vernickelt
Nickel-plated
CuZn40Pb2 2.0402verchromt
Chrome-plated
Stahl, verzinktGalvanized steel
KugelhähneBall valves
Nr. 1079
-
Friedrich Krombach GmbH & Co. KG Armaturenwerke D-57202 Kreuztal Postfach 1130Telefon (0 27 32) 520-00 Telefax (0 27 32) 520 100 http//www.krombach.com e Mail: [email protected]
Pos.Item Benennung Designation
123456789
GehäuseEinschraubteilKugelSchaltwelleDichtschaleSchaltwellendichtungO-RingKupplungO-Ring
BodyScrew partBallStemSeatStem sealingO-ringCouplingO-ring
Werkstoff / Material
CuZn40Pb2 vernickelt / Nickel-platedCuZn40Pb2 vernickelt / Nickel-platedCuZn40Pb2 vernickelt und hartverchromt / Nickel-plated and chrome-platedCuZn40Pb2 vernickelt / Nickel-platedPTFEPTFEVitonStahl, verzinkt / Galvanized steelViton
2.04022.04022.04022.0402
-----
DN L H t E L1 L2DIN ISO
5211 SWGewicht/Weight
≈[g]Rp ¼Rp dRp ½Rp ¾Rp 1Rp 1¼Rp 1½Rp 2
5060758090
110120140
3334
35,545,549,563
69,584,5
1011,415
16,319,121,421,425,7
3838384242505050
2530
37,54045556070
2530
37,54045556070
F03F03F03F04F04F05F05F05
1922273241505570
290310340560820
139017902900
DNbis / up to 10 bar25 bar40 barMd zul./Mt allow.
Rp 1¼15161758
Rp ½444
10
Rp ¾555
22
Rp 1888
22
Rp 1½21232658
Rp 225283267
Baumaße und Gewichte / Dimensions and weights
Werkstoffe / Materials
Anfahrdrehmomente [Nm] / Starting torques [Nm]
PrüfdrückeGehäuse: 1,5 x PN Wasser
6 bar LuftAbschluss: 1,1 x PN Wasser
6 bar Luft
Test pressuresBody: 1,5 x PN water
6 bar airSeat: 1,1 x PN water
6 bar air
Die Kvs-Werte bei Kugelhähnen mit vollem Durchgang entsprechen den vergleichbaren Rohrlängen.
The Kvs-values for ball valves with full bore correspond to the comparable pipe lengths.
Das Anfahrdrehmoment wird erheblich durch die Schalthäufigkeit beeinflusst.
Achtung!Bei nicht schmierenden Medien (z. B. Benzine, Gase) oder adhäsiven Medien ist eine entsprechende Erhöhung der Werte zu berücksichtigen.
The starting torque is considerably influenced by the number of actuations.
Attention!If non-lubricating media (i, e, benzine, gases) or adhesive media are used an increasing of the values has to be considered.
Die beschriebenen Armaturen entsprechen in Ihrer Konstruktion, ihren Abmessungen, Gewichten und Werkstoffen dem derzeitigen Stand der Technik. Änderungen im Zuge der Weiterentwicklung, sowie die Verwendung gleich- oder höherwertiger Werkstoffe bleiben vorbehalten. Für eventuelle Schreib- oder Übersetzungsfehler übernehmen wir keine Haftung.The construction, the measurements and the weights of the described valves represent the current technical standards. We reserve the right to change the technical details and to use materials of equivalent and higher quality. We cannot be held responsible for any printing or translation errors that might be found in this catalogue.
KugelhähneBall valves
Nr. 1079
04/08
-
Mit Gewinde nach ISO 7/1, Gehäuse aus Pressmessing vernickelt, Kugel aus Messing hartverchromt, wahlweise mit L- oder T-Bohrung, Schaltwelleaus Messing vernickelt, Dichtschalen aus PTFE, Schaltwellenabdichtung durch Teflon-Dichtringe, doppelseitig dichtend,allseitig mit Muffenanschluss.
FK-Kugelhähne in Dreiwegeform, PN 16 - PN 40
FK-ball valve, three way form, PN 16 - PN 40With female thresded ends acc. to ISO 7/1, body made of brass nickel-plated, ball made of brass hard chrome-plated, alternatively with L-bore or T-bore, stem made of brass nickel-plated, PTFE seats, stem sealing by Teflon sealing rings, double sided sealed,all sides with female threaded ends.
Bestell-Nr.Order No. PN
Werkstoffe / MaterialsAusführung
Design
mit vollem Durchgangdoppelseitig dichtend
With full boredouble sided sealed
16
Gehäuse, SchaltwelleBody, stem
KugelBall
SchaltgriffOperating handle
CuZn40Pb2 2.0402vernickelt
Nickel-plated
CuZn40Pb2 2.0402verchromt
Hard chrome-plated
X20Cr13 1.4021mit gelbem PlastküberzugWith yellow plastic coating
mit reduziert. Durchgangallseitig dichtendWith reduced bore
all sides sealed
16-40
KugelbohrungBall bore
mit L-BohrungWith L-bore
mit T-BohrungWith T-bore
mit L-BohrungWith L-bore
mit T-BohrungWith T-bore
KH 1081 L
KH 1082 T
KH 1083 L
KH 1084 T
Leichtmetallgelb lackiertLight-metal
yellow lacquered
Bitte beachten Sie, dass der Eintrittsstutzen bei Bestell-Nr. KH 1081 L und KH 1082 T ohne Dichtschalen ausgerüstet ist.Aus diesem Grund sollte dieser Stutzen auch wirklich nur als Eintrittsstutzen eingesetzt werden.Bei Bestell-Nr. KH 1083 L und 1084 T handelt es sich dagegen um Ausführungen mit allseitig eingesetzter Dichtung.
Please note that the inlet connection of order numbers KH 1081 L and KH 1082 T is without seats.Therefore, this body connection should be exclusively used as inlet connection.The order numbers KH 1083 L and 1084 T, however, are models with sealings on all sides.
KugelhähneBall valves
Nr. 1080
-
Friedrich Krombach GmbH & Co. KG Armaturenwerke D-57202 Kreuztal Postfach 1130Telefon (0 27 32) 520-00 Telefax (0 27 32) 520 100 http//www.krombach.com e Mail: [email protected]
Baumaße und Gewichte / Dimensions and weights
Rp ¼Rp dRp ½Rp ¾Rp 1Rp 1¼Rp 1½Rp 2
GewichtWeight≈[g]
GewichtWeight≈[g]
DN
KH 1081 L, KH 1082 T KH 1083 L, KH 1084 T
E H t1 l L SW E H t1 l L SW
110110110
129,5129,5159159188
47,547,550
62,56782
88,5109
1011,415
16,319,121,421,425,7
2326333845556070
4652667690
110120140
1922273241505570
160200290485850
139019803355
110110110
129,5129,5159159188
47,547,550
62,56782
88,5109
1011,415
16,319,121,421,425,7
26263338
46,5546373
5252667693
108126146
2222273241505570
250250370650
1100185031504700
L-Bohrung / L-bore L-Bohrung / L-bore T-Bohrung / T-bore T-Bohrung / T-bore T-Bohrung T-bore
Eintritt offenlinker Abgang offenrechter Abgang geschlossenOpen inletLeft outlet openRight outlet closed
Eintritt offenlinker Abgang geschlossenrechter Abgang offenOpen inletLeft outlet closedRight outlet open
Eintritt offenlinker Abgang offenrechter Abgang geschlossenOpen inletLeft outlet openRight outlet closed
Eintritt offenlinker Abgang offenrechter Abgang offenOpen inletLeft outlet openRight outlet open
Eintritt offenlinker Abgang geschlossenrechter Abgang offenOpen inletLeft outlet closedRight outlet open
Schaltschemen für Kugelhähne in Dreiwegeform / Operation schemes for three-way ball valves
Die beschriebenen Armaturen entsprechen in Ihrer Konstruktion, ihren Abmessungen, Gewichten und Werkstoffen dem derzeitigen Stand der Technik. Änderungen im Zuge der Weiterentwicklung, sowie die Verwendung gleich- oder höherwertiger Werkstoffe bleiben vorbehalten. Für eventuelle Schreib- oder Übersetzungsfehler übernehmen wir keine Haftung.The construction, the measurements and the weights of the described valves represent the current technical standards. We reserve the right to change the technical details and to use materials of equivalent and higher quality. We cannot be held responsible for any printing or translation errors that might be found in this catalogue.
KugelhähneBall valves
Nr. 1080
Einsatzbereich für Serien-Ausführung mit Teflon-Dichtgarnitur:• Wasser im Temperaturbereich von 4°C
bis 160° C• gesättigter Dampf• Druckluft• Gas• Öl, Kraftstoffe mit hohem Benzolanteil,
Heizöl• Lösungsmittel, Farben, Lacke,• in bedingtem Umfang auch schwache
Laugen und Säuren max. Einsatzbereichvon -20°C bis + 150° C Vakuumdicht bis 10 Torr.-3
Application range for valves with Teflon sealing• Water in the temperature range from 4°C
up to 160°C• Saturated steam• Compressed air• Gas• Oil, fuels with a high percentage of
benzine, fuel oil S• Solvents, paints and varnishes• Even weak acids and alkaline solutions to
a limited extent max. application rangefrom -20°C up to +150°C,Vacuum tightness up to 10 Torr-3
04/08
Bet
riebs
druc
kW
orki
ngpr
essu
re
BetriebstemperaturWorking temperature
Sattdampf-LinieSaturated steam line
-
FK-Kugelhahn nach DIN 3357, BS 5351, ASME B16.34 metallisch dichtend
FK-ball valve acc. to DIN 3357, BS 5351, ASME B16.34 metal seated
mit Flanschanschluss PN 10 - PN 40 oder ASME Class 150 bzw. Class 300, Gehäuse in zweiteiliger Ausführung, voller Durchgang, sitzgelagerteKugel, hochverschleißfestes metallisches Dichtsystem, ausblassichere Schaltwelle, mit antistatischer Ableitung, Totraumentlastung, Fire Safegemäß BS 6755 Teil 2, TA-Luft geprüft,Aufbauflansch für Antriebe gemäß DIN ISO 5211, Betätigung mit Handhebel, Schneckengetriebe oder pneumatischem Antrieb, Baulängen nach DIN EN 558-1 bzw. ASME B 16.10, API 6 D und BS 2080.Dichtleisten nach DIN 2526 Form C bzw. ASME B 16.5 RF.
with flanged connection PN 10 - PN 40 or ASME Class 150 or Class 300, body in two-piece design, full bore, floating ball, high wear resisting metal sealsystem, anti blow-out stem, antistatic, cavity relief, fire safe acc. to BS 6755 part 2, TA-Luft tested,with mounting flange for actuator acc. to DIN ISO 5211, operation with hand lever, gear box or pneumatic actuator.Face-to-face dimension acc. to DIN EN 558-1 or ASME B 16.10, API 6 D and BS 2080.Sealing surface acc. to DIN 2526 Form C or ASME B 16,5 RF.
Bestell-Nr.Order No.
Ventilsitz nach Krombach WerksbezeichnungSeat material acc. to Krombach codePN
GehäusewerkstoffBody material
1136
16/40
16/40
150/300 lbs
150/300 lbs
Edelstahlguss / Stainless steel casting
GX5CrNiMoNb19-11 1.4581
warmfester Stahlguss / Steel casting
GP240GH (GS-C 25) 1.0619
Edelstahlguss / Stainless steel casting
ASTM A351 CF8M
warmfester Stahlguss / Steel casting
ASTM A216 WCB
H2 bis / up to 300°C
Einschränkungen bei pH >10 / restrictions at pH >10
H3 bis / up to 400°C
Einschränkungen bei pH < 7 / restrictions at pH < 7
H4 bis / up to 400°C
bei Feststoffanteilen / with solids content
Einschränkungen bei pH < 7 / restrictions at pH < 7
KugelhähneBall valves
Nr. 1136
-
StandardausführungStandard design
Handhebel um 90° gedreht gezeichnetHandlever shown in a 90° shifted position
Getriebe um 90° gedreht gezeichnetGear box shown in a 90° shifted position
Ausführung mit SchneckengetriebeDesign with gear box
KugelhähneBall valves
Nr. 1136
-
15202532405065658080
100100150150200200200200
10-4010-4010-4010-4010-4010-4010/1625/4010/1625/4010/1625/4010/1625/40
10162540
130150160180200230290290310310350350450450550550550550
516060757590
120120105105125125187187220220185185
259259259332332332405405405405
--------
354949656575
107107107107130130187187244244244244
627777
105105115164164164164196196286286349349349349
108123123155155165227227227227
--------
172424383848767676769595
150150203203203203
95105115140150165185185200200220220285300340340360375
657585
100110125145145160160180190240250295295310320
4x144x144x144x184x184x184x188x188x188x188x188x228x228x268x22
12x2212x2612x30
4558687888
102122122138138158162212218268268278285
222233333333333333
161818181820182220242024222824243034
4,56,16,58,41116232329313840
100105145145165170
3535496575
107130187187
626277
105115164196286286
108108123155165207
---
17172438487695
150203
88,998,6108127
152,4190,5228,6279,4342,9
60,569,979,298,6
120,7152,4190,5241,3298,5
4x15,74x15,74x15,74x15,74x19,04x19,08x19,08x22,48x22,4
35,142,950,873,191,9127
157,2215,9269,7
1,61,61,61,61,61,61,61,61,6
11,212,714,217,519,123,923,925,428,4
4,46
6,41014243884
142
1/2"3/4"1"
1 1/2"2"3"4"6"8"
150150150150150150150150150
108117127165178203229394457
515360687789
107180220
259259259332332405
---
1/2"3/4"1"
1 1/2"2"3"4"6"8"
300300300300300300300300300
140152165190216283305403502
5661607290
105125168220
259259259332332405
---
3549496575
107130187187
627777
105115164196286286
108123123155165207
---
17242438487695
150203
95,2117,3123,9155,4165,1209,5254
317,5381
66,582,588,9
114,3127
168,1200,1269,7330,2
4x15,74x194x19
4x22,38x19
8x22,38x22,3
12x22.312x25,4
35,142,950,873.191,9127127
215,9269,7
1,61,61,61,61,61,61,61,61,6
14,215,717,520,622,328,431,736,541,1
5,47
7,512183354
110195
DN PNBaumaße / Dimensions [mm] Flanschanschlussmaße / Flange dimensions [mm] GewichtWeight
[kg]
DN ClassGewichtWeight
[kg]
DN ClassGewichtWeight
[kg]
Baumaße / Dimensions [mm] Flanschanschlussmaße / Flange dimensions [mm]
Baumaße / Dimensions [mm] Flanschanschlussmaße / Flange dimensions [mm]
L2 L0 L h1 h2 h3 d1 D k nxd g f b
L2 L0 L h1 h2 h3 d1 D k nxd g f b
L2 L0 L h1 h2 h3 d1 D k nxd g f b
DIN voller Durchgang / DIN full bore
ASME voller Durchgang / ASME full bore
ASME voller Durchgang / ASME full bore
GehäuseFlanschteilSchaltkugelKugeldichtringFederelementDruckringTellerfederStopfbuchsbrilleSchaltwelleLagerringStopfbuchsringStützringGehäusedichtringStiftschraubeSk.-MutterSk.-Schraube/StiftschraubeSk.-MutterDruckringHandhebelBlechZylinderschraubeScheibeSk.-Schraube
BodyCoverBallSeat ring Spring element Pressure ring Belleville spring washer GlandStemBearingPacking ring Supporting ring Body sealing ring Stud bolt Hex.-nutHex.-head screw/Stud bolt Hex.-nutPressure ring Hand lever Steel plate Fillister head screwDiscHex.-head screw
Pos.Item
123456789
1011121314151617181920212223
GP240GH1.0619
GX5CrNiMoNb19-111.4581 A216WCB A351CF8M
Werkstoffe / Materials
X6CrNiMoTi17-12-2 1.4571 beschichtet / CoatedX6CrNiMoTi17-12-2 1.4571 beschichtet / CoatedGrafit / GraphiteX6CrNiMoTi17-12-2 1.4571Inconel X750X6CrNiMoTi17-12-2 1.4571X6CrNiMoTi17-12-2 1.4571Hartkohle / Hard coalGrafit / GraphiteGrafit / GraphiteGrafit / GraphiteA4-70A4-70A4-70A4-70X6CrNiMoTi17-12-2 1.4571C15 1.0401St verzinkt / Zinc coated8.8 verzinkt / Zinc coatedSt verzinkt / Zinc coatedA4-70
Benennung Designation
Werkstoffe / Materials
KugelhähneBall valves
Nr. 1136
-
Ausführung mit geschlossener Schaltwellenverlängerungfür TieftemperatureinsatzDesign with closed stem extensionfor cryogenic applications
Standardlänge 100 mm für HochtemperatureinsatzStandard length 100 mm for high temperature applications
Aufbauflansch für Antriebe nach DIN ISO 5211Mounting flange for actuators acc. to DIN ISO 5211
15
20
25
32
40
50
65
80
100
150
200
½"¾" 150 lbs
¾" 300 lbs
1"
1½"
1½"
2"
2½"
3"
4"
6"
8"
DNDIN ISO
5211
F04
F05
F05
F07
F07
F07
F10
F10
F12
F16
F16
17
20
20
25
25
25
35
35
40
55
70
30
35
35
55
55
55
70
70
85
130
130
42
50
50
70
70
70
102
102
125
165
165
M5
M6
M6
M8
M8
M8
M10
M10
M12
M20
M20
9
9
9
15
15
15
20
20
30
45
55
27
28
28
40
40
40
57
57
66
99
105
3
3
3
3
3
3
3
3
3
5
5
52
62
62
60
60
60
80
80
-
-
-
14
18
18
20
20
20
22
22
-
-
-
12
14
14
16
16
16
22
22
27
36
46
d2 d4 d5 d6 h4 h5 Lk bk SWh6
DN
15
20
25
32
40
50
80
100
150
200
h8
200
250
300
350
KugelhähneBall valves
Nr. 1136
-
Ermittlung der Drehmomente
Das erforderliche Drehmoment wird von folgenden Größen bestimmt:• Nennweite (DN)• Druckdifferenz (Δp) zum Zeitpunkt der Ventilöffnung• Art und Eigenschaften des MediumsZur Ermittlung der Drehmomente müssen die aus dem nebenstehenden Diagramm ermittelten Werte mit dem Faktor FFmultipliziert werden.
Medium : FF Es ist zu beachten, dass dasÖl : 1,0 max. Drehmoment des AntriebesWasser : 1,3 das zulässige Drehmoment derGas : 2,6 Schaltwelle nicht überschreitet.
Determination of torques
The determination of the necessary torque depends on thefollowing variables.• Nominal size• Pressure difference (Δp) at the time when the valve opens• Nature and characteristics of the fluidTo determine the respective torque the values resulting from the diagram have to be multiplied by the factor of influence FF
Medium : FF It is important to ensure that theOil : 1,0 maximum torque of the actuatorWater : 1,3 does not exceed the allowableGas : 2,6 torque of the stem.
15
20
25
32
40
50
65
80
100
150
200
½"
¾"
1"
1½"
1½"
2"
2½"
3"
4"
6"
8"
DN 20°C 100°C 200°C 300°C 400°C
70
90
192
563
59
78
158
462
54
73
139
406
49
66
123
367
45
62
109
318
870
2184
4524
716
1705
3718
631
1581
3274
567
1426
2956
494
1240
2567
Zulässige p/T-Werte für drucktragende Teile [bar]Allowable p/T-values for pressure retaining parts [bar]
zulässiges Drehmoment der Schaltwelle [Nm] (Werkstoff 1.4571*)Allowable torque of the stem [Nm] (material 1.4571 *)
Material: A: 1.0619B: 1.4581
* andere Werkstoffe möglich / Other materials possible
Material: C: ASTM A216 WCBD: ASTM A351 CF8M
KugelhähneBall valves
Nr. 1136
-
Friedrich Krombach GmbH & Co. KG Armaturenwerke D-57202 Kreuztal Postfach 1130Telefon (0 27 32) 520-00 Telefax (0 27 32) 520 100 http//www.krombach.com e Mail: [email protected]
Ausführung mit SchaltwellenverlängerungDesign with stem extension
Handhebel um 90° gedreht gezeichnet!Hand lever shown !in a 90° shifted position
Ausführung mit HeizmantelDesign with heating jacket
Lieferbare Sonderausführungen: Special designs:
• With heating jacket• mit Heizmantel• With stem extension• mit Schaltwellenverlängerung• With electric, pneumatic or hydraulic actuator• mit elektrischem, pneumatischem oder hydraulischem Antrieb• Other sealing surfaces are possible• andere Flanschdichtleisten möglich
Handhebel um 90° gedreht gezeichnet!Hand lever shown in a 90° shifted position!
Die beschriebenen Armaturen entsprechen in Ihrer Konstruktion, ihren Abmessungen, Gewichten und Werkstoffen dem derzeitigen Stand der Technik. Änderungen im Zuge der Weiterentwicklung, sowie die Verwendung gleich- oder höherwertiger Werkstoffe bleiben vorbehalten. Für eventuelle Schreib- oder Übersetzungsfehler übernehmen wir keine Haftung.The construction, the measurements and the weights of the described valves represent the current technical standards. We reserve the right to change the technical details and to use materials of equivalent and higher quality. We cannot be held responsible for any printing or translation errors that might be found in this catalogue.
KugelhähneBall valves
Nr. 1136
04/07
-
FK-Kugelhahn nach BS 5351, ASME B16.34 weichdichtend
FK-ball valve acc. to BS 5351, ASME B16.34 soft seated
mit Flanschanschluss ASME Class 150 bzw. Class 300, Gehäuse in zweiteiliger Ausführung, voller Durchgang, TA-Luft, Fire-safe Design, mit antistatischer Ableitung, Schaltwelle ausblassicher,mit Aufbauflansch für Antriebe nach DIN ISO 5211, Betätigung mit Handhebel, Schneckengetriebe oder pneumatischem Antrieb, Baulängen nach ASME B 16.10, API 6 D und BS 2080.Dichtleisten nach ASME B 16.5 RF stock finish.
with flange connection ASME Class 150 or Class 300, body in two-piece design, full bore, TA-Luft, fire-safe design, antistatic, anti blow-out stem,with mounting flange for actuator acc. to ISO 5211, operation with hand lever, gear box or pneumatic actuator.Face-to-face dimension acc. to ASME B 16.10, API 6 D and BS 2080.Sealing surface acc. to ASME B 16.5 RF stock finish.
Bestell-Nr.Order No. PN
GehäusewerkstoffBody material
KH 3127
KH 3137
Class 150
Class 300
Class 150
Class 300
Edelstahlguss / Stainless steel casting GX5CrNiMo19-11-2
warmfester Stahlguss / Steel casting GP240GH (GS-C 25)
KugelhähneBall valves
Nr. 3127/3137
Werkstoff-Nr.Material No.
1.4408
ASTM A351 Gr. CF8M
1.0619
ASTM A216 Gr. WCB
-
StandardausführungStandard design
Getriebe um 90° gedreht gezeichnetGear box shown in a 90° shifted position
Ausführung mit SchneckengetriebeDesign with gear box
KugelhähneBall valves
Nr. 3127/3137X
8
34 1 12
1610
19
213
1179
6
2018
21 15
514.214.1
17
Ød1
nxØ
d2Ø
D
versetzt gezeichnetshown offset
L4L3
L1
Ød3
NP
S
L2
h4
h1h3
h5
versetzt gezeichnetshown offset
L5
h2
2325 22 24
AusführungDesignNPS 6", 8"
Ansicht "X" ohne HandhebelView "X" without lever
Ø d4
Ød5
SW
d6
Ød
-
Gehäuse
Anschraubteil
Kugel
Dichtschale
Stopfbuchsbrille
Schaltwelle
Schaltwellendichtung
Stopfbuchsring
Stopfbuchsring
Stützring
Gehäusedichtung
Stiftschraube
Sk.-Mutter
Sk.-Mutter
Stiftschraube
Sk.-Mutter
Druckring
Handhebel
Blech
Zylinderschraube
Scheibe
Schraube
Haltering
O-Ring
Feder
Lagerring
Body
Flange part
Ball
Seat
Gland
Stem
Stem sealing
Packing ring
Packing ring
Thrust ring
Body sealing
Stud bolt
Hex.-nut
Hex.-nut
Stud bolt
Hex.-nut
Pressure ring
Hand lever
Blank sheet
Cheese head screw
Disc
Screw
Retaining ring
O-ring
Spring
Bearing ring
1
2
3
4
5
6
7
8
9
10
11
12
13
14.1
14.2
15
16
17
18
19
20
21
22
23
24
25
Benennung Designation
KugelhähneBall valves
Nr. 3127/3137
Baumaße und GewichteDimensions and weights
WerkstoffeMaterials
NPS L1 L2 L3 L4 L5 D d d1 nxd2 d3 d4 d5 d6 h1 h2 h3 h4 h5 SWGewichtWeight≈[kg]
Zentr.DIN/ISO
5211
Class 150
1/2"
1"
1 1/2"
2"
3"
4"
6"
8"
108
127
165
178
203
229
394
457
71
60
68
77
89
107
180
220
11,2
14,2
17,5
19,1
23,9
23,9
25,4
28,4
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
250
260
320
320
400
460
o.H.
o.H.
88,9
108,9
127,0
152,4
190,5
228,6
279,4
342,9
17
20
25
25
35
40
55
70
60,5
79,2
98,6
120,7
152,4
190,5
241,3
298,5
4x16
4x16
4x16
4x19
4x19
8x19
8x22,4
8x22,4
34,9
50,8
73,1
91,9
127,0
157,2
215,9
269,7
30
35
55
55
70
85
130
130
42
50
70
70
102
125
165
165
M5
M6
M8
M8
M10
M12
M20
M20
35
49
65
75
107
130
187
187
2
3
3
3
3
3
3
3
63
80
105
115
164
196
286
286
103
116
150
160
220
260
o.H.
o.H.
9
9
15
15
20
30
45
45
12
14
16
16
22
27
36
46
4
6
10
14
24
38
84
142
F 04
F 05
F 07
F 07
F 10
F 12
F 16
F 16
NPS L1 L2 L3 L4 L5 D d d1 nxd2 d3 d4 d5 d6 h1 h2 h3 h4 h5 SWGewichtWeight≈[kg]
Zentr.DIN/ISO
5211
Class 300
1/2"
1"
1 1/2"
2"
3"
4"
6"
8"
139,7
165
190
216
283
305
403
502
78
60
72
90
105
125
168
220
14,2
17,5
20,6
22,3
28,4
31,7
36,5
41,1
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
250
260
320
320
400
460
o.H.
o.H.
95,2
123,9
155,4
165,1
209,5
254,0
317,5
381,0
17
20
25
25
35
40
55
70
66,5
88,9
114,3
127,0
168,1
200,1
269,7
330,2
4x16
4x19
4x22,3
8x19
8x22,3
8x22,3
12x22,3
12x25,4
34,9
50,8
73,1
91,9
127,0
157,2
215,9
269,7
30
35
55
55
70
85
130
130
42
50
70
70
102
125
165
165
M5
M6
M8
M8
M10
M12
M20
M20
35
49
65
75
107
130
187
187
2
3
3
3
3
3
3
3
63
80
105
115
164
196
286
286
103
116
150
160
220
260
o.H.
o.H.
9
9
15
15
20
30
45
45
12
14
16
16
22
27
36
46
3,7
7,5
12
18
33
54
110
195
F 04
F 05
F 07
F 07
F 10
F 12
F 16
F 16
Pos.Item
Werkstoff (Werkstoff-Nr.) / Material (Material No.)
KH 3127 KH 3137GX5CrNiMo19-11-2 (1.4408 / CF8M) GP240GH [GS-C 25] (1.0619 / WCB)
GX5CrNiMo19-11-2 (1.4408 / CF8M) GP240GH [GS-C 25] (1.0619 / WCB)
GX5CrNiMo19-11-2 (1.4408) / X6CrNiMoTi17-12-2 (1.4571)
TFM
X6CrNiMoTi17-12-2 (1.4571)
X2CrNiMoN22-5-3 (1.4462)
PTFE
PTFE
PTFE leitfähig / Conductive
PTFE
PTFE
A4-70
A4-70
A4-70
A4-70
A4-70
X6CrNiMoTi17-12-2 (1.4571)
C15
St verzinkt / Galvanized
8.8 verzinkt / Galvanized
St verzinkt / Galvanized
8.8 verzinkt / Galvanized
X6CrNiMoTi17-12-2 (1.4571)
Viton
X9CrNi18-8 (1.4310)
PTFE/Grafit
-
Friedrich Krombach GmbH & Co. KG Armaturenwerke D-57202 Kreuztal Postfach 1130Telefon (0 27 32) 520-00 Telefax (0 27 32) 520 100 http//www.krombach.com e Mail: [email protected]
Andere Druck-Temperaturbereiche sind durch die Wahlanderer Dichtungswerkstoffe möglich.Other pressure-temperature ranges are possible if othersealing materials are choosen.
Bei Temperaturen unter -10°C bitte AD-Merkblatt W 10 beachten.At temperatures less -10°C, please heed to AD-Merkblatt W10
The starting torque is considerably influenced by the number of the Das Anfahrmoment wird erheblich durch die Schalthäufigkeitshift frequency.beeinflusst.The smaller value of the table corresponds to shift frequency.Der kleinere Wert der Tabelle entspricht häufiger Schaltung.The greater value corresponds to a longer down time.Der größere Wert entspricht längerem Stillstand.
ATTENTION!ACHTUNG!If non-lubrication mediums (i.e. benzine