1/5

Easy Guide on How to Open a Garage Door WithoutPower/Manually

dvslocksmith.com/2021/07/30/how-to-open-a-garage-door-without-power

There are meager chances that you might get to open a garage door without power. Still, it

is effortless to open it manually without any power or a lot of force. You have to follow

some simple and easy steps to open a garage door without power.

But first of all, there are some reasons which can cause you to open the garage door

manually.

Reasons to Open a Garage Door Manually

There can be several reasons to open a garage door without power or manually by

yourself. There are different types of garage doors with different reasons.

Power Outage

Maybe your house gets a power cut or power outage due to some maintenance or any

natural disaster like tornadoes or floods. So, in this case, the door of the garage can be

stuck.

Hardware Problem

2/5

It is also possible that the motor of your garage door gets damaged and not working. So

also, in this case, the door can get stuck, and then you have to open it all by yourself.

In these situations, you might think in frustration to damage the door totally and get your

vehicle out, but this is not the solution. You can call a professional residential

locksmith in Oak Park, and he will handle the other process. He will clear all the

problems with the door, or you should learn to open it properly.

Easy Steps to Open the Garage Door without power or Manually

All you have to do is to follow some simple steps. Here are the steps:

Unplug the Automatic Door Opener

Now, you have to find the plug attached to a board or circuit and then unplug it. Most of

the time, it is right at the base of the trolley track on the ceiling.

Pull the cord

After finding the plug, unplug the cord to detach the garage door from the automatic door

opening system. Find the red handle with string to pull the emergency cord. You have to

complete this step because if electricity comes back, you don’t want the automatic system

to open the door automatically.

You will hear a click after pulling the string. Do it gently, or you could break it off.

If you don’t hear the click sound, there is the chance that the door is not entirely shut.

After shutting the door completely, it won’t get so much power to pull the handle.

Grab the door from the bottom

Now you have to get a tight grip from the bottom of the garage door and lift it straight.

Just keep lifting the door until it gets open enough for you to get your car out from the

garage. If the door’s strings are in their perfect condition, then the garage door will open

easily and will stay in its place after opening it.

But in the other case, if it gets difficult to open, you should call a service provider of lock

repair and replacement in Oak Park. He will help you in the other process.

Shut down the garage door

After getting your vehicle out, please don’t get the door open because it can get down

anytime. To prevent any accidental injury, you should close it right after getting your

vehicle out.

Wind blowing could be the cause of shutting down the door automatically.

Closing the door manually

3/5

Just grip the door and slide it down to close it properly. Keep doing it until it gets to touch

the ground. Please don’t leave the door halfway on its own to shut because it could

damage the door.

4/5

Lock the door with any manual lock

5/5

As the garage door is not attached to the automatic door opener and the locking

mechanism is not working, you should lock it manually. You can use a garage door lock to

keep your garage safe. If you don’t have any lock at that time, you can clamp it with a C-

clamp to prevent it from opening.

How to reconnect the automatic opener

Pull emergency cord

Pull down again the emergency cord towards the door opener after shutting the door

down.

You’ll again hear a click sound when the switch gets re-engaged, or you can also re-engage

or manually by reaching up to that switch.

Connect garage door with the trolley track

Now lift the door to connect it with the trolley track. To do this, raise the door a little bit

until it gets into the place on the track.

If the power comes back, then you can use the control panel of the door to reconnect it

with the trolley track.

Test it

Once you have done the reconnection step, then you have to test the door for any

problem. Please open the door all the way up and close it to check any sound, indicating

that there could be some problem.

If you’re dealing with a problem that you cannot find, you should call a technician or

professional in this field.

Congrats!

Now, you are totally able to open the door of your garage in any emergency on your own

but be careful in all the steps to open it, and don’t forget the precautions.